From 6c20c8ed2cb9ab69a1a57ccb2b9b79969a808321 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 17:38:56 +0200 Subject: Adding upstream version 5.2.15. Signed-off-by: Daniel Baumann --- COMPAT | 596 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 596 insertions(+) create mode 100644 COMPAT (limited to 'COMPAT') diff --git a/COMPAT b/COMPAT new file mode 100644 index 0000000..9fda7fb --- /dev/null +++ b/COMPAT @@ -0,0 +1,596 @@ +Compatibility with previous versions +==================================== + +This document details the incompatibilities between this version of bash, +bash-5.2, and the previous widely-available versions, bash-3.2 (which is +still the `standard' version for Mac OS X), 4.2/4.3 (which are still +standard on a few Linux distributions), and bash-4.4/bash-5.0/bash-5.1, +the current widely-available versions. These were discovered by users of +bash-2.x through 5.x, so this list is not comprehensive. Some of these +incompatibilities occur between the current version and versions 2.0 and +above. + +1. Bash uses a new quoting syntax, $"...", to do locale-specific + string translation. Users who have relied on the (undocumented) + behavior of bash-1.14 will have to change their scripts. For + instance, if you are doing something like this to get the value of + a variable whose name is the value of a second variable: + + eval var2=$"$var1" + + you will have to change to a different syntax. + + This capability is directly supported by bash-2.0: + + var2=${!var1} + + This alternate syntax will work portably between bash-1.14 and bash-2.0: + + eval var2=\$${var1} + +2. One of the bugs fixed in the YACC grammar tightens up the rules + concerning group commands ( {...} ). The `list' that composes the + body of the group command must be terminated by a newline or + semicolon. That's because the braces are reserved words, and are + recognized as such only when a reserved word is legal. This means + that while bash-1.14 accepted shell function definitions like this: + + foo() { : } + + bash-2.0 requires this: + + foo() { :; } + + This is also an issue for commands like this: + + mkdir dir || { echo 'could not mkdir' ; exit 1; } + + The syntax required by bash-2.0 is also accepted by bash-1.14. + +3. The options to `bind' have changed to make them more consistent with + the rest of the bash builtins. If you are using `bind -d' to list + the readline key bindings in a form that can be re-read, use `bind -p' + instead. If you were using `bind -v' to list the key bindings, use + `bind -P' instead. + +4. The `long' invocation options must now be prefixed by `--' instead + of `-'. (The old form is still accepted, for the time being.) + +5. There was a bug in the version of readline distributed with bash-1.14 + that caused it to write badly-formatted key bindings when using + `bind -d'. The only key sequences that were affected are C-\ (which + should appear as \C-\\ in a key binding) and C-" (which should appear + as \C-\"). If these key sequences appear in your inputrc, as, for + example, + + "\C-\": self-insert + + they will need to be changed to something like the following: + + "\C-\\": self-insert + +6. A number of people complained about having to use ESC to terminate an + incremental search, and asked for an alternate mechanism. Bash-2.03 + uses the value of the settable readline variable `isearch-terminators' + to decide which characters should terminate an incremental search. If + that variable has not been set, ESC and Control-J will terminate a + search. + +7. Some variables have been removed: MAIL_WARNING, notify, history_control, + command_oriented_history, glob_dot_filenames, allow_null_glob_expansion, + nolinks, hostname_completion_file, noclobber, no_exit_on_failed_exec, and + cdable_vars. Most of them are now implemented with the new `shopt' + builtin; others were already implemented by `set'. Here is a list of + correspondences: + + MAIL_WARNING shopt mailwarn + notify set -o notify + history_control HISTCONTROL + command_oriented_history shopt cmdhist + glob_dot_filenames shopt dotglob + allow_null_glob_expansion shopt nullglob + nolinks set -o physical + hostname_completion_file HOSTFILE + noclobber set -o noclobber + no_exit_on_failed_exec shopt execfail + cdable_vars shopt cdable_vars + +8. `ulimit' now sets both hard and soft limits and reports the soft limit + by default (when neither -H nor -S is specified). This is compatible + with versions of sh and ksh that implement `ulimit'. The bash-1.14 + behavior of, for example, + + ulimit -c 0 + + can be obtained with + + ulimit -S -c 0 + + It may be useful to define an alias: + + alias ulimit="ulimit -S" + +9. Bash-2.01 uses a new quoting syntax, $'...' to do ANSI-C string + translation. Backslash-escaped characters in ... are expanded and + replaced as specified by the ANSI C standard. + +10. The sourcing of startup files has changed somewhat. This is explained + more completely in the INVOCATION section of the manual page. + + A non-interactive shell not named `sh' and not in posix mode reads + and executes commands from the file named by $BASH_ENV. A + non-interactive shell started by `su' and not in posix mode will read + startup files. No other non-interactive shells read any startup files. + + An interactive shell started in posix mode reads and executes commands + from the file named by $ENV. + +11. The <> redirection operator was changed to conform to the POSIX.2 spec. + In the absence of any file descriptor specification preceding the `<>', + file descriptor 0 is used. In bash-1.14, this was the behavior only + when in POSIX mode. The bash-1.14 behavior may be obtained with + + <>filename 1>&0 + +12. The `alias' builtin now checks for invalid options and takes a `-p' + option to display output in POSIX mode. If you have old aliases beginning + with `-' or `+', you will have to add the `--' to the alias command + that declares them: + + alias -x='chmod a-x' --> alias -- -x='chmod a-x' + +13. The behavior of range specificiers within bracket matching expressions + in the pattern matcher (e.g., [A-Z]) depends on the current locale, + specifically the value of the LC_COLLATE environment variable. Setting + this variable to C or POSIX will result in the traditional ASCII behavior + for range comparisons. If the locale is set to something else, e.g., + en_US (specified by the LANG or LC_ALL variables), collation order is + locale-dependent. For example, the en_US locale sorts the upper and + lower case letters like this: + + AaBb...Zz + + so a range specification like [A-Z] will match every letter except `z'. + Other locales collate like + + aAbBcC...zZ + + which means that [A-Z] matches every letter except `a'. + + The portable way to specify upper case letters is [:upper:] instead of + A-Z; lower case may be specified as [:lower:] instead of a-z. + + Look at the manual pages for setlocale(3), strcoll(3), and, if it is + present, locale(1). + + You can find your current locale information by running locale(1): + + caleb.ins.cwru.edu(2)$ locale + LANG=en_US + LC_CTYPE="en_US" + LC_NUMERIC="en_US" + LC_TIME="en_US" + LC_COLLATE="en_US" + LC_MONETARY="en_US" + LC_MESSAGES="en_US" + LC_ALL=en_US + + My advice is to put + + export LC_COLLATE=C + + into /etc/profile and inspect any shell scripts run from cron for + constructs like [A-Z]. This will prevent things like + + rm [A-Z]* + + from removing every file in the current directory except those beginning + with `z' and still allow individual users to change the collation order. + Users may put the above command into their own profiles as well, of course. + +14. Bash versions up to 1.14.7 included an undocumented `-l' operator to + the `test/[' builtin. It was a unary operator that expanded to the + length of its string argument. This let you do things like + + test -l $variable -lt 20 + + for example. + + This was included for backwards compatibility with old versions of the + Bourne shell, which did not provide an easy way to obtain the length of + the value of a shell variable. + + This operator is not part of the POSIX standard, because one can (and + should) use ${#variable} to get the length of a variable's value. + Bash-2.x does not support it. + +15. Bash no longer auto-exports the HOME, PATH, SHELL, TERM, HOSTNAME, + HOSTTYPE, MACHTYPE, or OSTYPE variables. If they appear in the initial + environment, the export attribute will be set, but if bash provides a + default value, they will remain local to the current shell. + +16. Bash no longer initializes the FUNCNAME, GROUPS, or DIRSTACK variables + to have special behavior if they appear in the initial environment. + +17. Bash no longer removes the export attribute from the SSH_CLIENT or + SSH2_CLIENT variables, and no longer attempts to discover whether or + not it has been invoked by sshd in order to run the startup files. + +18. Bash no longer requires that the body of a function be a group command; + any compound command is accepted. + +19. As of bash-3.0, the pattern substitution operators no longer perform + quote removal on the pattern before attempting the match. This is the + way the pattern removal functions behave, and is more consistent. + +20. After bash-3.0 was released, I reimplemented tilde expansion, incorporating + it into the mainline word expansion code. This fixes the bug that caused + the results of tilde expansion to be re-expanded. There is one + incompatibility: a ${paramOPword} expansion within double quotes will not + perform tilde expansion on WORD. This is consistent with the other + expansions, and what POSIX specifies. + +21. A number of variables have the integer attribute by default, so the += + assignment operator returns expected results: RANDOM, LINENO, MAILCHECK, + HISTCMD, OPTIND. + +22. Bash-3.x is much stricter about $LINENO correctly reflecting the line + number in a script; assignments to LINENO have little effect. + +23. By default, readline binds the terminal special characters to their + readline equivalents. As of bash-3.1/readline-5.1, this is optional and + controlled by the bind-tty-special-chars readline variable. + +24. The \W prompt string expansion abbreviates $HOME as `~'. The previous + behavior is available with ${PWD##/*/}. + +25. The arithmetic exponentiation operator is right-associative as of bash-3.1. + +26. The rules concerning valid alias names are stricter, as per POSIX.2. + +27. The Readline key binding functions now obey the convert-meta setting active + when the binding takes place, as the dispatch code does when characters + are read and processed. + +28. The historical behavior of `trap' reverting signal disposition to the + original handling in the absence of a valid first argument is implemented + only if the first argument is a valid signal number. + +29. In versions of bash after 3.1, the ${parameter//pattern/replacement} + expansion does not interpret `%' or `#' specially. Those anchors don't + have any real meaning when replacing every match. + +30. Beginning with bash-3.1, the combination of posix mode and enabling the + `xpg_echo' option causes echo to ignore all options, not looking for `-n' + +31. Beginning with bash-3.2, bash follows the Bourne-shell-style (and POSIX- + style) rules for parsing the contents of old-style backquoted command + substitutions. Previous versions of bash attempted to recursively parse + embedded quoted strings and shell constructs; bash-3.2 uses strict POSIX + rules to find the closing backquote and simply passes the contents of the + command substitution to a subshell for parsing and execution. + +32. Beginning with bash-3.2, bash uses access(2) when executing primaries for + the test builtin and the [[ compound command, rather than looking at the + file permission bits obtained with stat(2). This obeys restrictions of + the file system (e.g., read-only or noexec mounts) not available via stat. + +33. Bash-3.2 adopts the convention used by other string and pattern matching + operators for the `[[' compound command, and matches any quoted portion + of the right-hand-side argument to the =~ operator as a string rather + than a regular expression. + +34. Bash-4.0 allows the behavior in the previous item to be modified using + the notion of a shell `compatibility level'. If the compat31 shopt + option is set, quoting the pattern has no special effect. + +35. Bash-3.2 (patched) and Bash-4.0 fix a bug that leaves the shell in an + inconsistent internal state following an assignment error. One of the + changes means that compound commands or { ... } grouping commands are + aborted under some circumstances in which they previously were not. + This is what Posix specifies. + +36. Bash-4.0 now allows process substitution constructs to pass unchanged + through brace expansion, so any expansion of the contents will have to be + separately specified, and each process substitution will have to be + separately entered. + +37. Bash-4.0 now allows SIGCHLD to interrupt the wait builtin, as Posix + specifies, so the SIGCHLD trap is no longer always invoked once per + exiting child if you are using `wait' to wait for all children. As + of bash-4.2, this is the status quo only when in posix mode. + +38. Since bash-4.0 now follows Posix rules for finding the closing delimiter + of a $() command substitution, it will not behave as previous versions + did, but will catch more syntax and parsing errors before spawning a + subshell to evaluate the command substitution. + +39. The programmable completion code uses the same set of delimiting characters + as readline when breaking the command line into words, rather than the + set of shell metacharacters, so programmable completion and readline + should be more consistent. + +40. When the read builtin times out, it attempts to assign any input read to + specified variables, which also causes variables to be set to the empty + string if there is not enough input. Previous versions discarded the + characters read. + +41. Beginning with bash-4.0, when one of the commands in a pipeline is killed + by a SIGINT while executing a command list, the shell acts as if it + received the interrupt. This can be disabled by setting the compat31 or + compat32 shell options. + +42. Bash-4.0 changes the handling of the set -e option so that the shell exits + if a pipeline fails (and not just if the last command in the failing + pipeline is a simple command). This is not as Posix specifies. There is + work underway to update this portion of the standard; the bash-4.0 + behavior attempts to capture the consensus at the time of release. + +43. Bash-4.0 fixes a Posix mode bug that caused the . (source) builtin to + search the current directory for its filename argument, even if "." is + not in $PATH. Posix says that the shell shouldn't look in $PWD in this + case. + +44. Bash-4.1 uses the current locale when comparing strings using the < and + > operators to the `[[' command. This can be reverted to the previous + behavior (ASCII collating and strcmp(3)) by setting one of the + `compatNN' shopt options, where NN is less than 41. + +45. Bash-4.1 conforms to the current Posix specification for `set -u': + expansions of $@ and $* when there are no positional parameters do not + cause the shell to exit. + +46. Bash-4.1 implements the current Posix specification for `set -e' and + exits when any command fails, not just a simple command or pipeline. + +47. Command substitutions now remove the caller's trap strings when trap is + run to set a new trap in the subshell. Previous to bash-4.2, the old + trap strings persisted even though the actual signal handlers were reset. + +48. When in Posix mode, a single quote is not treated specially in a + double-quoted ${...} expansion, unless the expansion operator is + # or % or the new `//', `^', or `,' expansions. In particular, it + does not define a new quoting context. This is from Posix interpretation + 221. + +49. Posix mode shells no longer exit if a variable assignment error occurs + with an assignment preceding a command that is not a special builtin. + +50. Bash-4.2 attempts to preserve what the user typed when performing word + completion, instead of, for instance, expanding shell variable + references to their value. + +51. When in Posix mode, bash-4.2 exits if the filename supplied as an argument + to `.' is not found and the shell is not interactive. + +52. When compiled for strict Posix compatibility, bash-4.3 does not enable + history expansion by default in interactive shells, since it results in + a non-conforming environment. + +53. Bash-4.3 runs the replacement string in the pattern substitution word + expansion through quote removal. The code already treats quote + characters in the replacement string as special; if it treats them as + special, then quote removal should remove them. + +54. Bash-4.4 no longer considers a reference to ${a[@]} or ${a[*]}, where `a' + is an array without any elements set, to be a reference to an unset + variable. This means that such a reference will not cause the shell to + exit when the `-u' option is enabled. + +55. Bash-4.4 allows double quotes to quote the history expansion character (!) + when in Posix mode, since Posix specifies the effects of double quotes. + +56. Bash-4.4 does not inherit $PS4 from the environment if running as root. + +57. Bash-4.4 doesn't allow a `break' or `continue' in a function to affect + loop execution in the calling context. + +58. Bash-4.4 no longer expands tildes in $PATH elements when in Posix mode. + +59. Bash-4.4 does not attempt to perform a compound array assignment if an + argument to `declare' or a similar builtin expands to a word that looks + like a compound array assignment (e.g. declare w=$x where x='(foo)'). + +60. Bash-5.0 only sets up BASH_ARGV and BASH_ARGC at startup if extended + debugging mode is active. The old behavior of unconditionally setting + BASH_ARGC and BASH_ARGV is available at compatibility levels less than + or equal to 44. + +61. Bash-5.0 doesn't allow a `break' or `continue' in a subshell to attempt + to break or continue loop execution inherited from the calling context. + +62. Bash-5.0 doesn't allow variable assignments preceding builtins like + export and readonly to modify variables with the same name in preceding + contexts (including the global context) unless the shell is in posix + mode, since export and readonly are special builtins. + +63. Bash-5.1 changes the way posix-mode shells handle assignment statements + preceding shell function calls. Previous versions of POSIX specified that + such assignments would persist after the function returned; subsequent + versions of the standard removed that requirement (interpretation #654). + Bash-5.1 posix mode assignment statements preceding shell function calls + do not persist after the function returns. + +64. Bash-5.1 reverts to the bash-4.4 treatment of pathname expansion of words + containing backslashes but no other special globbing characters. This comes + after a protracted discussion and a POSIX interpretation (#1234). + +65. In bash-5.1, disabling posix mode attempts to restore the state of several + options that posix mode modifies to the state they had before enabling + posix mode. Previous versions restored these options to default values. + +66. Bash-5.2 attempts to prevent double-expansion of array subscripts under + certain circumstances, especially arithmetic evaluation, by acting as if + the `assoc_expand_once' shell option were set. + +67. The `unset' builtin in bash-5.2 treats array subscripts `@' and `*' + differently than previous versions, and differently depending on whether + the array is indexed or associative. + + +Shell Compatibility Level +========================= + +Bash-4.0 introduced the concept of a `shell compatibility level', specified +as a set of options to the shopt builtin (compat31, compat32, compat40, +compat41, and so on). There is only one current compatibility level -- +each option is mutually exclusive. The compatibility level is intended to +allow users to select behavior from previous versions that is incompatible +with newer versions while they migrate scripts to use current features and +behavior. It's intended to be a temporary solution. + +This section does not mention behavior that is standard for a particular +version (e.g., setting compat32 means that quoting the rhs of the regexp +matching operator quotes special regexp characters in the word, which is +default behavior in bash-3.2 and above). + +If a user enables, say, compat32, it may affect the behavior of other +compatibility levels up to and including the current compatibility level. +The idea is that each compatibility level controls behavior that changed in +that version of bash, but that behavior may have been present in earlier +versions. For instance, the change to use locale-based comparisons with +the `[[' command came in bash-4.1, and earlier versions used ASCII-based +comparisons, so enabling compat32 will enable ASCII-based comparisons as +well. That granularity may not be sufficient for all uses, and as a result +users should employ compatibility levels carefully. Read the documentation +for a particular feature to find out the current behavior. + +Bash-4.3 introduced a new shell variable: BASH_COMPAT. The value assigned +to this variable (a decimal version number like 4.2, or an integer +corresponding to the compatNN option, like 42) determines the compatibility +level. + +Starting with bash-4.4, bash has begun deprecating older compatibility +levels. Eventually, the options will be removed in favor of the +BASH_COMPAT variable. + +Bash-5.0 is the final version for which there will be an individual shopt +option for the previous version. Users should use the BASH_COMPAT variable +on bash-5.0 and later versions. + +The following table describes the behavior changes controlled by each +compatibility level setting. The `compatNN' tag is used as shorthand for +setting the compatibility level to NN using one of the following +mechanisms. For versions prior to bash-5.0, the compatibility level may be +set using the corresponding compatNN shopt option. For bash-4.3 and later +versions, the BASH_COMPAT variable is preferred, and it is required for +bash-5.1 and later versions. + +compat31 + - the < and > operators to the [[ command do not consider the current + locale when comparing strings; they use ASCII ordering + - quoting the rhs of the [[ command's regexp matching operator (=~) + has no special effect + +compat32 + - the < and > operators to the [[ command do not consider the current + locale when comparing strings; they use ASCII ordering + - interrupting a command list such as "a ; b ; c" causes the execution + of the next command in the list (in bash-4.0 and later versions, + the shell acts as if it received the interrupt, so interrupting + one command in a list aborts the execution of the entire list) + +compat40 + - the < and > operators to the [[ command do not consider the current + locale when comparing strings; they use ASCII ordering. + Bash versions prior to bash-4.1 use ASCII collation and strcmp(3); + bash-4.1 and later use the current locale's collation sequence and + strcoll(3). + +compat41 + - in posix mode, `time' may be followed by options and still be + recognized as a reserved word (this is POSIX interpretation 267) + - in posix mode, the parser requires that an even number of single + quotes occur in the `word' portion of a double-quoted ${...} + parameter expansion and treats them specially, so that characters + within the single quotes are considered quoted (this is POSIX + interpretation 221) + +compat42 + - the replacement string in double-quoted pattern substitution is not + run through quote removal, as it is in versions after bash-4.2 + - in posix mode, single quotes are considered special when expanding + the `word' portion of a double-quoted ${...} parameter expansion + and can be used to quote a closing brace or other special character + (this is part of POSIX interpretation 221); in later versions, + single quotes are not special within double-quoted word expansions + +compat43 + - the shell does not print a warning message if an attempt is made to + use a quoted compound assignment as an argument to declare + (declare -a foo='(1 2)'). Later versions warn that this usage is + deprecated. + - word expansion errors are considered non-fatal errors that cause the + current command to fail, even in posix mode (the default behavior is + to make them fatal errors that cause the shell to exit) + - when executing a shell function, the loop state (while/until/etc.) + is not reset, so `break' or `continue' in that function will break + or continue loops in the calling context. Bash-4.4 and later reset + the loop state to prevent this + +compat44 + - the shell sets up the values used by BASH_ARGV and BASH_ARGC so + they can expand to the shell's positional parameters even if extended + debug mode is not enabled + - a subshell inherits loops from its parent context, so `break' + or `continue' will cause the subshell to exit. Bash-5.0 and later + reset the loop state to prevent the exit + - variable assignments preceding builtins like export and readonly + that set attributes continue to affect variables with the same + name in the calling environment even if the shell is not in posix + mode + +compat50 (set using BASH_COMPAT) + - Bash-5.1 changed the way $RANDOM is generated to introduce slightly + more randomness. If the shell compatibility level is set to 50 or + lower, it reverts to the method from bash-5.0 and previous versions, + so seeding the random number generator by assigning a value to + RANDOM will produce the same sequence as in bash-5.0 + - If the command hash table is empty, bash versions prior to bash-5.1 + printed an informational message to that effect even when writing + output in a format that can be reused as input (-l). Bash-5.1 + suppresses that message if -l is supplied + - Bash-5.1 and later use pipes for here-documents and here-strings if + they are smaller than the pipe capacity. If the shell compatibility + level is set to 50 or lower, it reverts to using temporary files. + +compat51 (set using BASH_COMPAT) + - The `unset' builtin will unset the array a given an argument like + `a[@]'. Bash-5.2 will unset an element with key `@' (associative + arrays) or remove all the elements without unsetting the array + (indexed arrays) + - arithmetic commands ( ((...)) ) and the expressions in an arithmetic + for statement can be expanded more than once + - expressions used as arguments to arithmetic operators in the [[ + conditional command can be expanded more than once + - indexed and associative array subscripts used as arguments to the + operators in the [[ conditional command (e.g., `[[ -v') can be + expanded more than once. Bash-5.2 behaves as if the + `assoc_expand_once' option were enabled. + - the expressions in substring parameter brace expansion can be + expanded more than once + - the expressions in the $(( ... )) word expansion can be expanded + more than once + - arithmetic expressions used as indexed array subscripts can be + expanded more than once; + - `test -v', when given an argument of A[@], where A is an existing + associative array, will return true if the array has any set + elements. Bash-5.2 will look for a key named `@'; + - the ${param[:]=value} word expansion will return VALUE, before any + variable-specific transformations have been performed (e.g., + converting to lowercase). Bash-5.2 will return the final value + assigned to the variable, as POSIX specifies; + - Parsing command substitutions will act as if extended glob is + enabled, so that parsing a command substitution containing an extglob + pattern (say, as part of a shell function) will not fail. This + assumes the intent is to enable extglob before the command is + executed and word expansions are performed. It will fail at word + expansion time if extglob hasn't been enabled by the time the + command is executed. + +------------------------------------------------------------------------------- + +Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without any warranty. -- cgit v1.2.3