From 6c20c8ed2cb9ab69a1a57ccb2b9b79969a808321 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 17:38:56 +0200 Subject: Adding upstream version 5.2.15. Signed-off-by: Daniel Baumann --- po/ko.po | 5541 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 5541 insertions(+) create mode 100644 po/ko.po (limited to 'po/ko.po') diff --git a/po/ko.po b/po/ko.po new file mode 100644 index 0000000..4b3fbc6 --- /dev/null +++ b/po/ko.po @@ -0,0 +1,5541 @@ +# Korean Translation for bash +# Copyright (C) 2019 Free Software Foundation, Inc. +# This file is distributed under the same license as the bash package. +# SooHyun Kim , 2019. +# Seong-ho Cho , 2022. +# +msgid "" +msgstr "" +"Project-Id-Version: bash-5.2-rc1\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2022-01-11 14:50-0500\n" +"PO-Revision-Date: 2022-06-25 01:50+0900\n" +"Last-Translator: Seong-ho Cho \n" +"Language-Team: Korean \n" +"Language: ko\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Bugs: Report translation errors to the Language-Team address.\n" +"Plural-Forms: nplurals=1; plural=0;\n" +"X-Generator: Poedit 2.3.1\n" + +#: arrayfunc.c:66 +msgid "bad array subscript" +msgstr "잘못된 배열 첨자" + +#: arrayfunc.c:471 builtins/declare.def:709 variables.c:2242 variables.c:2268 +#: variables.c:3101 +#, c-format +msgid "%s: removing nameref attribute" +msgstr "%s: 이름 참조 속성을 지우는 중" + +#: arrayfunc.c:496 builtins/declare.def:868 +#, c-format +msgid "%s: cannot convert indexed to associative array" +msgstr "%s: 색인 배열을 연관 배열로 변환할 수 없음" + +#: arrayfunc.c:777 +#, c-format +msgid "%s: cannot assign to non-numeric index" +msgstr "%s: 숫자가 아닌 인덱스에 할당할 수 없음" + +#: arrayfunc.c:822 +#, c-format +msgid "%s: %s: must use subscript when assigning associative array" +msgstr "%s: %s: 연관 배열을 할당하려면 반드시 첨자를 사용해야 함" + +#: bashhist.c:455 +#, c-format +msgid "%s: cannot create: %s" +msgstr "%s: 생성할 수 없음: %s" + +#: bashline.c:4479 +msgid "bash_execute_unix_command: cannot find keymap for command" +msgstr "bash_execute_unix_command: 명령의 keymap을 찾을 수 없음" + +#: bashline.c:4637 +#, c-format +msgid "%s: first non-whitespace character is not `\"'" +msgstr "%s: 공백이 아닌 첫 문자가 `\"'가 아님" + +#: bashline.c:4666 +#, c-format +msgid "no closing `%c' in %s" +msgstr "%2$s에 닫는 `%1$c' 없음" + +#: bashline.c:4697 +#, c-format +msgid "%s: missing colon separator" +msgstr "%s: 콜론 구분자 없음" + +#: bashline.c:4733 +#, c-format +msgid "`%s': cannot unbind in command keymap" +msgstr "`%s': 명령 keymap의 바인딩을 해제할 수 없음" + +#: braces.c:327 +#, c-format +msgid "brace expansion: cannot allocate memory for %s" +msgstr "괄호 확장: %s의 메모리를 할당할 수 없음" + +#: braces.c:406 +#, c-format +msgid "brace expansion: failed to allocate memory for %u elements" +msgstr "괄호 확장: 요소 %u개에서 메모리 할당 실패" + +#: braces.c:451 +#, c-format +msgid "brace expansion: failed to allocate memory for `%s'" +msgstr "괄호 확장: `%s'의 메모리 할당 실패" + +#: builtins/alias.def:131 variables.c:1817 +#, c-format +msgid "`%s': invalid alias name" +msgstr "`%s': 부적절한 별명" + +#: builtins/bind.def:122 builtins/bind.def:125 +msgid "line editing not enabled" +msgstr "줄 편집 기능 꺼짐" + +#: builtins/bind.def:212 +#, c-format +msgid "`%s': invalid keymap name" +msgstr "`%s': 부적절한 keymap 이름" + +#: builtins/bind.def:252 +#, c-format +msgid "%s: cannot read: %s" +msgstr "%s: %s을(를) 읽을 수 없음" + +#: builtins/bind.def:328 builtins/bind.def:358 +#, c-format +msgid "`%s': unknown function name" +msgstr "`%s': 알 수 없는 함수 이름" + +#: builtins/bind.def:336 +#, c-format +msgid "%s is not bound to any keys.\n" +msgstr "%s은(는) 어떤 키에도 바인딩하지 않음.\n" + +#: builtins/bind.def:340 +#, c-format +msgid "%s can be invoked via " +msgstr "%s은(는) 다음을 통해 호출될 수 있음 " + +#: builtins/bind.def:378 builtins/bind.def:395 +#, c-format +msgid "`%s': cannot unbind" +msgstr "`%s': 바인딩 해제 불가" + +#: builtins/break.def:77 builtins/break.def:119 +msgid "loop count" +msgstr "반복 횟수" + +#: builtins/break.def:139 +msgid "only meaningful in a `for', `while', or `until' loop" +msgstr "'for', 'while', 'until' 반복문에서만 의미 있음" + +#: builtins/caller.def:136 +msgid "" +"Returns the context of the current subroutine call.\n" +" \n" +" Without EXPR, returns \"$line $filename\". With EXPR, returns\n" +" \"$line $subroutine $filename\"; this extra information can be used to\n" +" provide a stack trace.\n" +" \n" +" The value of EXPR indicates how many call frames to go back before the\n" +" current one; the top frame is frame 0." +msgstr "" +"현재 하위루틴 호출의 컨텍스트를 반환합니다.\n" +" \n" +" <표현식>을 지정하지 않으면 \"$line $filename\"을 반환합니다.\n" +" <표현식>을 지정하면 \"$line $subroutine $filename\"을 반환합니다.\n" +" 추가 정보는 스택 추적을 제공할 때 활용할 수 있습니다.\n" +" \n" +" <표현식>의 값은 현재 호출 프레임에서 얼마나 뒤로 돌아가야 하는지를\n" +" 나타냅니다. 최상단 호출 프레임은 프레임 0번입니다." + +#: builtins/cd.def:327 +msgid "HOME not set" +msgstr "HOME 설정하지 않음" + +#: builtins/cd.def:335 builtins/common.c:161 test.c:916 +msgid "too many arguments" +msgstr "인자가 너무 많음" + +#: builtins/cd.def:342 +msgid "null directory" +msgstr "디렉터리 값이 비어있음" + +#: builtins/cd.def:353 +msgid "OLDPWD not set" +msgstr "OLDPWD 설정하지 않음" + +#: builtins/common.c:96 +#, c-format +msgid "line %d: " +msgstr "행 %d번: " + +#: builtins/common.c:134 error.c:264 +#, c-format +msgid "warning: " +msgstr "경고: " + +#: builtins/common.c:148 +#, c-format +msgid "%s: usage: " +msgstr "%s: 사용법: " + +#: builtins/common.c:193 shell.c:524 shell.c:866 +#, c-format +msgid "%s: option requires an argument" +msgstr "%s: 옵션에 인자가 필요함" + +#: builtins/common.c:200 +#, c-format +msgid "%s: numeric argument required" +msgstr "%s: 숫자 인자가 필요함" + +#: builtins/common.c:207 +#, c-format +msgid "%s: not found" +msgstr "%s: 찾을 수 없음" + +#: builtins/common.c:216 shell.c:879 +#, c-format +msgid "%s: invalid option" +msgstr "%s: 부적절한 옵션" + +#: builtins/common.c:223 +#, c-format +msgid "%s: invalid option name" +msgstr "%s: 부적절한 옵션 이름" + +#: builtins/common.c:230 execute_cmd.c:2402 general.c:368 general.c:373 +#, c-format +msgid "`%s': not a valid identifier" +msgstr "`%s': 적절한 식별자 아님" + +#: builtins/common.c:240 +msgid "invalid octal number" +msgstr "부적절한 8진수" + +#: builtins/common.c:242 +msgid "invalid hex number" +msgstr "부적절한 16진수" + +#: builtins/common.c:244 expr.c:1574 +msgid "invalid number" +msgstr "부적절한 숫자" + +#: builtins/common.c:252 +#, c-format +msgid "%s: invalid signal specification" +msgstr "%s: 부적절한 시그널 정의" + +#: builtins/common.c:259 +#, c-format +msgid "`%s': not a pid or valid job spec" +msgstr "`%s': PID가 아니거나 적절한 작업 명세 없음" + +#: builtins/common.c:266 error.c:536 +#, c-format +msgid "%s: readonly variable" +msgstr "%s: 읽기 전용 변수임" + +#: builtins/common.c:273 +#, c-format +msgid "%s: cannot assign" +msgstr "%s: 할당할 수 없음" + +#: builtins/common.c:281 +#, c-format +msgid "%s: %s out of range" +msgstr "%s: %s이(가) 범위를 벗어남" + +#: builtins/common.c:281 builtins/common.c:283 +msgid "argument" +msgstr "인자" + +#: builtins/common.c:283 +#, c-format +msgid "%s out of range" +msgstr "%s이(가) 범위를 벗어남" + +#: builtins/common.c:291 +#, c-format +msgid "%s: no such job" +msgstr "%s: 그런 작업이 없음" + +#: builtins/common.c:299 +#, c-format +msgid "%s: no job control" +msgstr "%s: 작업 컨트롤 없음" + +#: builtins/common.c:301 +msgid "no job control" +msgstr "작업 컨트롤 없음" + +#: builtins/common.c:311 +#, c-format +msgid "%s: restricted" +msgstr "%s: 제한됨" + +#: builtins/common.c:313 +msgid "restricted" +msgstr "제한됨" + +#: builtins/common.c:321 +#, c-format +msgid "%s: not a shell builtin" +msgstr "%s: 셸 내장 명령이 아님" + +#: builtins/common.c:330 +#, c-format +msgid "write error: %s" +msgstr "쓰기 오류: %s" + +#: builtins/common.c:338 +#, c-format +msgid "error setting terminal attributes: %s" +msgstr "터미널 속성 설정 오류: %s" + +#: builtins/common.c:340 +#, c-format +msgid "error getting terminal attributes: %s" +msgstr "터미널 속성 읽기 오류: %s" + +#: builtins/common.c:642 +#, c-format +msgid "%s: error retrieving current directory: %s: %s\n" +msgstr "%s: 현재 디렉터리 가져오는 중 오류 발생: %s: %s\n" + +#: builtins/common.c:708 builtins/common.c:710 +#, c-format +msgid "%s: ambiguous job spec" +msgstr "%s: 모호한 작업 명세" + +#: builtins/common.c:971 +msgid "help not available in this version" +msgstr "이 버전에는 도움말이 없습니다" + +#: builtins/common.c:1038 builtins/set.def:953 variables.c:3825 +#, c-format +msgid "%s: cannot unset: readonly %s" +msgstr "%s: 설정 해제할 수 없음: %s이(가) 읽기 전용임" + +#: builtins/common.c:1043 builtins/set.def:932 variables.c:3830 +#, c-format +msgid "%s: cannot unset" +msgstr "%s: 설정 해제할 수 없음" + +#: builtins/complete.def:287 +#, c-format +msgid "%s: invalid action name" +msgstr "%s: 부적절한 액션 이름" + +#: builtins/complete.def:486 builtins/complete.def:642 +#: builtins/complete.def:873 +#, c-format +msgid "%s: no completion specification" +msgstr "%s: 완성 명세 없음" + +#: builtins/complete.def:696 +msgid "warning: -F option may not work as you expect" +msgstr "경고: -F 옵션이 예상대로 작동하지 않을 수 있음" + +#: builtins/complete.def:698 +msgid "warning: -C option may not work as you expect" +msgstr "경고: -C 옵션이 예상대로 작동하지 않을 수 있음" + +#: builtins/complete.def:846 +msgid "not currently executing completion function" +msgstr "완성 함수를 현재 실행하고 있지 않음" + +#: builtins/declare.def:137 +msgid "can only be used in a function" +msgstr "함수에서만 사용할 수 있음" + +#: builtins/declare.def:437 +msgid "cannot use `-f' to make functions" +msgstr "함수 구성에 `-f' 옵션을 사용할 수 없음" + +#: builtins/declare.def:464 execute_cmd.c:6132 +#, c-format +msgid "%s: readonly function" +msgstr "%s: 읽기 전용 함수" + +#: builtins/declare.def:521 builtins/declare.def:804 +#, c-format +msgid "%s: reference variable cannot be an array" +msgstr "%s: 참조 변수로 배열이 올 수 없음" + +#: builtins/declare.def:532 variables.c:3359 +#, c-format +msgid "%s: nameref variable self references not allowed" +msgstr "%s: 이름 참조 변수의 자가 참조를 허용하지 않음" + +#: builtins/declare.def:537 variables.c:2072 variables.c:3278 variables.c:3286 +#: variables.c:3356 +#, c-format +msgid "%s: circular name reference" +msgstr "%s: 순환 이름 참조" + +#: builtins/declare.def:541 builtins/declare.def:811 builtins/declare.def:820 +#, c-format +msgid "`%s': invalid variable name for name reference" +msgstr "`%s': 이름 참조의 부적절한 변수 이름" + +#: builtins/declare.def:856 +#, c-format +msgid "%s: cannot destroy array variables in this way" +msgstr "%s: 이 방법으로 배열 변수를 해체할 수 없음" + +#: builtins/declare.def:862 builtins/read.def:887 +#, c-format +msgid "%s: cannot convert associative to indexed array" +msgstr "%s: 참조 배열을 색인 배열로 변환할 수 없음" + +#: builtins/declare.def:891 +#, c-format +msgid "%s: quoted compound array assignment deprecated" +msgstr "%s: 따옴표를 이용한 복합 배열 할당은 향후 제거 예정" + +#: builtins/enable.def:145 builtins/enable.def:153 +msgid "dynamic loading not available" +msgstr "동적 불러오기 불가" + +#: builtins/enable.def:376 +#, c-format +msgid "cannot open shared object %s: %s" +msgstr "%s 공유 객체를 열 수 없음: %s" + +#: builtins/enable.def:405 +#, c-format +msgid "cannot find %s in shared object %s: %s" +msgstr "%2$s 공유 객체에서 %1$s을(를) 찾을 수 없음: %3$s" + +#: builtins/enable.def:422 +#, c-format +msgid "%s: dynamic builtin already loaded" +msgstr "%s: 동적 내장 명령을 이미 불러왔습니다" + +#: builtins/enable.def:426 +#, c-format +msgid "load function for %s returns failure (%d): not loaded" +msgstr "%s에 대한 함수 불러오기 중 실패 반환 (%d): 불러오지 않음" + +#: builtins/enable.def:551 +#, c-format +msgid "%s: not dynamically loaded" +msgstr "%s: 동적으로 불러오지 않음" + +#: builtins/enable.def:577 +#, c-format +msgid "%s: cannot delete: %s" +msgstr "%s: 삭제할 수 없음: %s" + +#: builtins/evalfile.c:138 builtins/hash.def:185 execute_cmd.c:5959 +#, c-format +msgid "%s: is a directory" +msgstr "%s: 디렉터리임" + +#: builtins/evalfile.c:144 +#, c-format +msgid "%s: not a regular file" +msgstr "%s: 일반 파일이 아님" + +#: builtins/evalfile.c:153 +#, c-format +msgid "%s: file is too large" +msgstr "%s: 파일이 너무 큼" + +#: builtins/evalfile.c:188 builtins/evalfile.c:206 shell.c:1673 +#, c-format +msgid "%s: cannot execute binary file" +msgstr "%s: 이진 파일을 실행할 수 없음" + +#: builtins/exec.def:158 builtins/exec.def:160 builtins/exec.def:246 +#, c-format +msgid "%s: cannot execute: %s" +msgstr "%s: 실행할 수 없음: %s" + +#: builtins/exit.def:64 +#, c-format +msgid "logout\n" +msgstr "로그아웃\n" + +#: builtins/exit.def:89 +msgid "not login shell: use `exit'" +msgstr "로그인 셸이 아님: `exit'를 사용하십시오" + +#: builtins/exit.def:121 +#, c-format +msgid "There are stopped jobs.\n" +msgstr "멈춘 작업이 있습니다.\n" + +#: builtins/exit.def:123 +#, c-format +msgid "There are running jobs.\n" +msgstr "실행 중인 작업이 있습니다.\n" + +#: builtins/fc.def:275 builtins/fc.def:373 builtins/fc.def:417 +msgid "no command found" +msgstr "명령을 찾을 수 없음" + +#: builtins/fc.def:363 builtins/fc.def:368 builtins/fc.def:407 +#: builtins/fc.def:412 +msgid "history specification" +msgstr "기록 명세" + +#: builtins/fc.def:444 +#, c-format +msgid "%s: cannot open temp file: %s" +msgstr "%s: 임시 파일을 열 수 없음: %s" + +#: builtins/fg_bg.def:152 builtins/jobs.def:284 +msgid "current" +msgstr "현재" + +#: builtins/fg_bg.def:161 +#, c-format +msgid "job %d started without job control" +msgstr "작업 %d번이 작업 컨트롤 없이 시작했습니다" + +#: builtins/getopt.c:110 +#, c-format +msgid "%s: illegal option -- %c\n" +msgstr "%s: 잘못된 옵션 -- %c\n" + +#: builtins/getopt.c:111 +#, c-format +msgid "%s: option requires an argument -- %c\n" +msgstr "%s: 옵션에 인자가 필요함 -- %c\n" + +#: builtins/hash.def:91 +msgid "hashing disabled" +msgstr "해싱 비활성화됨" + +#: builtins/hash.def:139 +#, c-format +msgid "%s: hash table empty\n" +msgstr "%s: 해시 테이블이 비어있음\n" + +#: builtins/hash.def:267 +#, c-format +msgid "hits\tcommand\n" +msgstr "hits\tcommand\n" + +#: builtins/help.def:133 +msgid "Shell commands matching keyword `" +msgid_plural "Shell commands matching keywords `" +msgstr[0] "다음 키워드에 일치하는 셸 명령어 '" + +#: builtins/help.def:135 +msgid "" +"'\n" +"\n" +msgstr "" +"'\n" +"\n" + +#: builtins/help.def:185 +#, c-format +msgid "no help topics match `%s'. Try `help help' or `man -k %s' or `info %s'." +msgstr "`%s'에 해당하는 도움말 주제가 없습니다. `man -k %s' 또는 `info %s' 명령을 입력하십시오." + +#: builtins/help.def:223 +#, c-format +msgid "%s: cannot open: %s" +msgstr "%s: 열 수 없음: %s" + +#: builtins/help.def:523 +#, c-format +msgid "" +"These shell commands are defined internally. Type `help' to see this list.\n" +"Type `help name' to find out more about the function `name'.\n" +"Use `info bash' to find out more about the shell in general.\n" +"Use `man -k' or `info' to find out more about commands not in this list.\n" +"\n" +"A star (*) next to a name means that the command is disabled.\n" +"\n" +msgstr "" +"이 셸 명령어는 내부에 지정했습니다. 목록을 보려면 `help'를 입력하십시오.\n" +"`help name'을 입력하면 함수 `name'의 정보를 더 확인할 수 있습니다.\n" +"셸에 대한 일반적인 정보를 더 확인하려면 `info bash'를 사용하십시오.\n" +"이 목록에 없는 명령어에 대해 더 알아보려면 `man -k' 또는 `info'를 사용하십시오.\n" +"\n" +"명령어 이름 다음의 별(*) 표시는 해당 명령어의 비활성 상태을 의미합니다.\n" +"\n" + +#: builtins/history.def:159 +msgid "cannot use more than one of -anrw" +msgstr "-anrw를 한 개 이상 사용할 수 없음" + +#: builtins/history.def:192 builtins/history.def:204 builtins/history.def:215 +#: builtins/history.def:228 builtins/history.def:240 builtins/history.def:247 +msgid "history position" +msgstr "기록 위치" + +#: builtins/history.def:338 +#, c-format +msgid "%s: invalid timestamp" +msgstr "%s: 부적절한 타임스탬프" + +#: builtins/history.def:449 +#, c-format +msgid "%s: history expansion failed" +msgstr "%s: 기록 확장 실패" + +#: builtins/inlib.def:71 +#, c-format +msgid "%s: inlib failed" +msgstr "%s: inlib 실패" + +#: builtins/jobs.def:109 +msgid "no other options allowed with `-x'" +msgstr "`-x'와 다른 옵션을 같이 사용할 수 없음" + +#: builtins/kill.def:211 +#, c-format +msgid "%s: arguments must be process or job IDs" +msgstr "%s: 인자는 반드시 프로세스 또는 작업 ID이어야 함" + +#: builtins/kill.def:274 +msgid "Unknown error" +msgstr "알 수 없는 오류" + +#: builtins/let.def:97 builtins/let.def:122 expr.c:640 expr.c:658 +msgid "expression expected" +msgstr "표현식이 필요합니다" + +#: builtins/mapfile.def:180 +#, c-format +msgid "%s: not an indexed array" +msgstr "%s: 색인 배열이 아님" + +#: builtins/mapfile.def:276 builtins/read.def:336 +#, c-format +msgid "%s: invalid file descriptor specification" +msgstr "%s: 부적절한 파일 서술자 명세" + +#: builtins/mapfile.def:284 builtins/read.def:343 +#, c-format +msgid "%d: invalid file descriptor: %s" +msgstr "%d: 부적절한 파일 서술자: %s" + +#: builtins/mapfile.def:293 builtins/mapfile.def:331 +#, c-format +msgid "%s: invalid line count" +msgstr "%s: 부적절한 줄 수" + +#: builtins/mapfile.def:304 +#, c-format +msgid "%s: invalid array origin" +msgstr "%s: 부적절한 배열의 시작" + +#: builtins/mapfile.def:321 +#, c-format +msgid "%s: invalid callback quantum" +msgstr "%s: 부적절한 콜백 양자" + +#: builtins/mapfile.def:354 +msgid "empty array variable name" +msgstr "빈 배열 변수 이름" + +#: builtins/mapfile.def:375 +msgid "array variable support required" +msgstr "배열 변수 지원이 필요함" + +#: builtins/printf.def:430 +#, c-format +msgid "`%s': missing format character" +msgstr "`%s': 서식 문자 없음" + +#: builtins/printf.def:485 +#, c-format +msgid "`%c': invalid time format specification" +msgstr "`%c': 부적절한 시간 포맷 사양" + +#: builtins/printf.def:708 +#, c-format +msgid "`%c': invalid format character" +msgstr "`%c': 부적절한 서식 문자" + +#: builtins/printf.def:734 +#, c-format +msgid "warning: %s: %s" +msgstr "경고: %s: %s" + +#: builtins/printf.def:822 +#, c-format +msgid "format parsing problem: %s" +msgstr "형식 해석 문제: %s" + +#: builtins/printf.def:919 +msgid "missing hex digit for \\x" +msgstr "\\x에 16진수 숫자 없음" + +#: builtins/printf.def:934 +#, c-format +msgid "missing unicode digit for \\%c" +msgstr "\\%c에 유니코드 문자 없음" + +#: builtins/pushd.def:199 +msgid "no other directory" +msgstr "다른 디렉터리 없음" + +#: builtins/pushd.def:360 +#, c-format +msgid "%s: invalid argument" +msgstr "%s: 부적절한 인자" + +#: builtins/pushd.def:480 +msgid "" +msgstr "<현재 디렉터리 없음>" + +#: builtins/pushd.def:524 +msgid "directory stack empty" +msgstr "디렉터리 스택이 비어있음" + +#: builtins/pushd.def:526 +msgid "directory stack index" +msgstr "디렉터리 스택 색인" + +#: builtins/pushd.def:701 +msgid "" +"Display the list of currently remembered directories. Directories\n" +" find their way onto the list with the `pushd' command; you can get\n" +" back up through the list with the `popd' command.\n" +" \n" +" Options:\n" +" -c\tclear the directory stack by deleting all of the elements\n" +" -l\tdo not print tilde-prefixed versions of directories relative\n" +" \tto your home directory\n" +" -p\tprint the directory stack with one entry per line\n" +" -v\tprint the directory stack with one entry per line prefixed\n" +" \twith its position in the stack\n" +" \n" +" Arguments:\n" +" +N\tDisplays the Nth entry counting from the left of the list shown by\n" +" \tdirs when invoked without options, starting with zero.\n" +" \n" +" -N\tDisplays the Nth entry counting from the right of the list shown by\n" +"\tdirs when invoked without options, starting with zero." +msgstr "" +"현재 기억한 디렉터리의 목록을 보여줍니다. 디렉터리는\n" +" `pushd' 명령으로 목록에 경로를 저장할 수 있고 'popd' \n" +" 명령으로 거슬러 올라갈 수 있습니다.\n" +" \n" +" 옵션:\n" +" -c\t원소를 전부 삭제하여 디렉터리 스택을 초기화합니다\n" +" -l\t홈 디렉터리까지 ~ 축약 상대경로를 표시하지 않습니다\n" +" -p\t한 줄에 하나씩 디렉터리 스택을 표시합니다\n" +" -v\t한 줄에 하나씩 스택의 위치와 디렉터리 스택을 표시합니다\n" +" \n" +" 인자:\n" +" +N\t인자 없이 실행할 때 dirs에서 보여주는 목록의 왼쪽부터 N번째\n" +" \t항목을 보여줍니다. 세는 수는 0부터 시작합니다.\n" +" \n" +" -N\t인자 없이 실행할 때 dirs에서 보여주는 목록의 오른쪽부터 N번째\n" +" \t 항목을 보여줍니다. 세는 수는 0부터 시작합니다." + +#: builtins/pushd.def:723 +msgid "" +"Adds a directory to the top of the directory stack, or rotates\n" +" the stack, making the new top of the stack the current working\n" +" directory. With no arguments, exchanges the top two directories.\n" +" \n" +" Options:\n" +" -n\tSuppresses the normal change of directory when adding\n" +" \tdirectories to the stack, so only the stack is manipulated.\n" +" \n" +" Arguments:\n" +" +N\tRotates the stack so that the Nth directory (counting\n" +" \tfrom the left of the list shown by `dirs', starting with\n" +" \tzero) is at the top.\n" +" \n" +" -N\tRotates the stack so that the Nth directory (counting\n" +" \tfrom the right of the list shown by `dirs', starting with\n" +" \tzero) is at the top.\n" +" \n" +" dir\tAdds DIR to the directory stack at the top, making it the\n" +" \tnew current working directory.\n" +" \n" +" The `dirs' builtin displays the directory stack." +msgstr "" +"디렉터리 스택의 최상위에 디렉터리를 추가하거나 스택을 회전\n" +" 하거나, 현재 작업중인 디렉터리에서 스택의 새 최상위를 \n" +" 만듭니다. 인자가 없다면 상위 두 디렉터리를 교환합니다.\n" +" \n" +" 옵션:\n" +" -n\t스택에 디렉터리를 추가할 때 디렉터리 일반 변경 동작을\n" +" \t억제해서 스택만 바뀌게 합니다.\n" +" \n" +" 인자:\n" +" +N\tN번째 디렉터리가 최상단이 되도록(0부터 시작해서\n" +" \t`dirs' 내장 명령 목록 왼쪽부터 갯수를 셈) 스택을 뒤집습니다.\n" +" \n" +" -N\tN 번째 디렉터리가 최상단이 되도록(0부터 시작해서\n" +" \t`dirs' 내장 명령 목록 오른쪽부터 갯수를 셈) 스택을 뒤집습니다.\n" +" \n" +" dir\t새 현재 작업 디렉터리로 만들 DIR을 상단 디렉터리\n" +" \t 스택에 추가합니다.\n" +" \n" +" `dirs' 내장 명령은 디렉터리 스택을 보여줍니다." + +#: builtins/pushd.def:748 +msgid "" +"Removes entries from the directory stack. With no arguments, removes\n" +" the top directory from the stack, and changes to the new top directory.\n" +" \n" +" Options:\n" +" -n\tSuppresses the normal change of directory when removing\n" +" \tdirectories from the stack, so only the stack is manipulated.\n" +" \n" +" Arguments:\n" +" +N\tRemoves the Nth entry counting from the left of the list\n" +" \tshown by `dirs', starting with zero. For example: `popd +0'\n" +" \tremoves the first directory, `popd +1' the second.\n" +" \n" +" -N\tRemoves the Nth entry counting from the right of the list\n" +" \tshown by `dirs', starting with zero. For example: `popd -0'\n" +" \tremoves the last directory, `popd -1' the next to last.\n" +" \n" +" The `dirs' builtin displays the directory stack." +msgstr "" +"디렉터리 스택에서 항목을 제거합니다. 주어진 인자가 없을 경우\n" +" 최상위 디렉터리를 스택에서 제거하고 새 최상위 디렉터리로 변경합니다.\n" +" \n" +" 옵션:\n" +" -n\t스택에 디렉터리를 제거할 때 디렉터리 일반 변경 동작을\n" +" \t억제해서 스택만 바뀌게 합니다.\n" +" \n" +" 인자:\n" +" +N\t0부터 시작해서 `dirs' 내장 명령 목록 왼쪽부터 갯수를 세어\n" +" \tN번째 항목을 제거합니다. 예: `popd +0'는 첫번째 디렉터리를, \n" +" \t`popd +1'는 두번째 디렉터리를 제거합니다.\n" +" \n" +" -N\t0부터 시작해서 `dirs' 내장 명령 목록 오른쪽부터 갯수를 세어\n" +" \tN번째 항목을 제거합니다. 예: `popd -0'는 마지막 디렉터리를, \n" +" \t`popd -1'는 마지막의 그 전 디렉터리를 제거합니다.\n" +" \n" +" `dirs' 내장 명령은 디렉터리 스택을 나타냅니다." + +#: builtins/read.def:308 +#, c-format +msgid "%s: invalid timeout specification" +msgstr "%s: 부적절한 타임아웃 정의" + +#: builtins/read.def:827 +#, c-format +msgid "read error: %d: %s" +msgstr "읽기 오류: %d: %s" + +#: builtins/return.def:68 +msgid "can only `return' from a function or sourced script" +msgstr "함수 또는 원본 참조 스크립트에서만 'return' 할 수 있음" + +#: builtins/set.def:869 +msgid "cannot simultaneously unset a function and a variable" +msgstr "함수와 변수를 동시에 설정 해제할 수 없음" + +#: builtins/set.def:969 +#, c-format +msgid "%s: not an array variable" +msgstr "%s: 배열 변수가 아님" + +#: builtins/setattr.def:189 +#, c-format +msgid "%s: not a function" +msgstr "%s: 함수가 아님" + +#: builtins/setattr.def:194 +#, c-format +msgid "%s: cannot export" +msgstr "%s: 환경으로 내보낼 수 없음" + +#: builtins/shift.def:72 builtins/shift.def:79 +msgid "shift count" +msgstr "시프트 횟수" + +#: builtins/shopt.def:323 +msgid "cannot set and unset shell options simultaneously" +msgstr "셸 옵션을 동시에 설정 및 설정 해제할 수 없음" + +#: builtins/shopt.def:444 +#, c-format +msgid "%s: invalid shell option name" +msgstr "%s: 부적절한 셸 옵션 이름" + +#: builtins/source.def:128 +msgid "filename argument required" +msgstr "인자로 파일 이름이 반드시 필요함" + +#: builtins/source.def:154 +#, c-format +msgid "%s: file not found" +msgstr "%s: 파일을 찾을 수 없음" + +#: builtins/suspend.def:102 +msgid "cannot suspend" +msgstr "일시 정지할 수 없음" + +#: builtins/suspend.def:112 +msgid "cannot suspend a login shell" +msgstr "로그인 셸을 일시 정지할 수 없음" + +#: builtins/type.def:235 +#, c-format +msgid "%s is aliased to `%s'\n" +msgstr "%s은(는) `%s'의 별칭임\n" + +#: builtins/type.def:256 +#, c-format +msgid "%s is a shell keyword\n" +msgstr "%s은(는) 셸 키워드임\n" + +#: builtins/type.def:275 +#, c-format +msgid "%s is a function\n" +msgstr "%s은(는) 함수임\n" + +#: builtins/type.def:299 +#, c-format +msgid "%s is a special shell builtin\n" +msgstr "%s은(는) 특수 셸 내장 명령임\n" + +#: builtins/type.def:301 +#, c-format +msgid "%s is a shell builtin\n" +msgstr "%s은(는) 셸 내장임\n" + +#: builtins/type.def:323 builtins/type.def:408 +#, c-format +msgid "%s is %s\n" +msgstr "%s은(는) %s 임\n" + +#: builtins/type.def:343 +#, c-format +msgid "%s is hashed (%s)\n" +msgstr "%s은(는) 해시됨 (%s)\n" + +#: builtins/ulimit.def:400 +#, c-format +msgid "%s: invalid limit argument" +msgstr "%s: 부적절한 제한 인자" + +#: builtins/ulimit.def:426 +#, c-format +msgid "`%c': bad command" +msgstr "`%c': 잘못된 명령어" + +#: builtins/ulimit.def:464 +#, c-format +msgid "%s: cannot get limit: %s" +msgstr "%s: 제한을 읽을 수 없음: %s" + +#: builtins/ulimit.def:490 +msgid "limit" +msgstr "제한" + +#: builtins/ulimit.def:502 builtins/ulimit.def:802 +#, c-format +msgid "%s: cannot modify limit: %s" +msgstr "%s: 제한을 바꿀 수 없음: %s" + +#: builtins/umask.def:115 +msgid "octal number" +msgstr "8진수" + +#: builtins/umask.def:232 +#, c-format +msgid "`%c': invalid symbolic mode operator" +msgstr "`%c': 부적절한 심볼릭 모드 연산자" + +#: builtins/umask.def:287 +#, c-format +msgid "`%c': invalid symbolic mode character" +msgstr "`%c': 부적절한 심볼릭 모드 문자" + +#: error.c:89 error.c:373 error.c:375 error.c:377 +msgid " line " +msgstr " 줄 " + +#: error.c:164 +#, c-format +msgid "last command: %s\n" +msgstr "마지막 명령: %s\n" + +#: error.c:172 +#, c-format +msgid "Aborting..." +msgstr "취소중..." + +#. TRANSLATORS: this is a prefix for informational messages. +#: error.c:287 +#, c-format +msgid "INFORM: " +msgstr "정보: " + +#: error.c:310 +#, c-format +msgid "DEBUG warning: " +msgstr "디버깅 경고: " + +#: error.c:488 +msgid "unknown command error" +msgstr "알 수 없는 명령 오류" + +#: error.c:489 +msgid "bad command type" +msgstr "잘못된 명령 형식" + +#: error.c:490 +msgid "bad connector" +msgstr "잘못된 커넥터" + +#: error.c:491 +msgid "bad jump" +msgstr "잘못된 점프" + +#: error.c:529 +#, c-format +msgid "%s: unbound variable" +msgstr "%s: 바인딩 해제한 변수" + +#: eval.c:243 +msgid "\atimed out waiting for input: auto-logout\n" +msgstr "\a입력 대기중 시간 초과: 자동으로 로그아웃\n" + +#: execute_cmd.c:555 +#, c-format +msgid "cannot redirect standard input from /dev/null: %s" +msgstr "표준 입력을 /dev/null에서 방향재지정 처리할 수 없음: %s" + +#: execute_cmd.c:1317 +#, c-format +msgid "TIMEFORMAT: `%c': invalid format character" +msgstr "TIMEFORMAT: `%c': 부적절한 서식 문자" + +#: execute_cmd.c:2391 +#, c-format +msgid "execute_coproc: coproc [%d:%s] still exists" +msgstr "execute_coproc: coproc [%d:%s] 가 여전히 존재" + +#: execute_cmd.c:2524 +msgid "pipe error" +msgstr "파이프 오류" + +#: execute_cmd.c:4923 +#, c-format +msgid "eval: maximum eval nesting level exceeded (%d)" +msgstr "eval: 최대 eval 중첩 레벨 초과 (%d)" + +#: execute_cmd.c:4935 +#, c-format +msgid "%s: maximum source nesting level exceeded (%d)" +msgstr "%s: 최대 소스 중첩 레벨 초과 (%d)" + +#: execute_cmd.c:5043 +#, c-format +msgid "%s: maximum function nesting level exceeded (%d)" +msgstr "%s: 최대 함수 중첩 레벨 초과 (%d)" + +#: execute_cmd.c:5598 +#, c-format +msgid "%s: restricted: cannot specify `/' in command names" +msgstr "%s: 제한됨: 명령 이름에 '/'를 지정할 수 없음" + +#: execute_cmd.c:5715 +#, c-format +msgid "%s: command not found" +msgstr "%s: 명령어를 찾을 수 없음" + +#: execute_cmd.c:5957 +#, c-format +msgid "%s: %s" +msgstr "%s: %s" + +#: execute_cmd.c:5975 +#, c-format +msgid "%s: cannot execute: required file not found" +msgstr "%s: 실행할 수 없음: 필요한 파일이 없습니다" + +#: execute_cmd.c:6000 +#, c-format +msgid "%s: %s: bad interpreter" +msgstr "%s: %s: 잘못된 인터프리터" + +#: execute_cmd.c:6037 +#, c-format +msgid "%s: cannot execute binary file: %s" +msgstr "%s: 이진 파일을 실행할 수 없음: %s" + +#: execute_cmd.c:6123 +#, c-format +msgid "`%s': is a special builtin" +msgstr "`%s': 특수한 내장 명령임" + +#: execute_cmd.c:6175 +#, c-format +msgid "cannot duplicate fd %d to fd %d" +msgstr "파일 서술자 %d번을 파일 서술자 %d번으로 복제할 수 없음" + +#: expr.c:263 +msgid "expression recursion level exceeded" +msgstr "표현식 재귀 레벨 초과" + +#: expr.c:291 +msgid "recursion stack underflow" +msgstr "재귀 스택 언더플로우" + +#: expr.c:478 +msgid "syntax error in expression" +msgstr "표현식 문법 오류" + +#: expr.c:522 +msgid "attempted assignment to non-variable" +msgstr "비 변수에 할당 시도" + +#: expr.c:531 +msgid "syntax error in variable assignment" +msgstr "변수 할당 문법 오류" + +#: expr.c:545 expr.c:912 +msgid "division by 0" +msgstr "0으로 나눔" + +#: expr.c:593 +msgid "bug: bad expassign token" +msgstr "버그: 잘못된 표현식 토큰" + +#: expr.c:647 +msgid "`:' expected for conditional expression" +msgstr "조건문에 ':' 필요함" + +#: expr.c:973 +msgid "exponent less than 0" +msgstr "지수가 0보다 작음" + +#: expr.c:1030 +msgid "identifier expected after pre-increment or pre-decrement" +msgstr "전위 증가 또는 후위 감소 후에 식별자가 필요함" + +#: expr.c:1057 +msgid "missing `)'" +msgstr "')' 빠짐" + +#: expr.c:1108 expr.c:1492 +msgid "syntax error: operand expected" +msgstr "문법 오류: 피연산자 필요함" + +#: expr.c:1494 +msgid "syntax error: invalid arithmetic operator" +msgstr "문법 오류: 부적절한 산술 연산자" + +#: expr.c:1518 +#, c-format +msgid "%s%s%s: %s (error token is \"%s\")" +msgstr "%s%s%s: %s (오류 토큰은 \"%s\" 임)" + +#: expr.c:1578 +msgid "invalid arithmetic base" +msgstr "부적절한 진법" + +#: expr.c:1587 +msgid "invalid integer constant" +msgstr "부적절한 정수 상수" + +#: expr.c:1603 +msgid "value too great for base" +msgstr "해당 진법에서 표현할 수 없는 값" + +#: expr.c:1652 +#, c-format +msgid "%s: expression error\n" +msgstr "%s: 표현식 오류\n" + +#: general.c:70 +msgid "getcwd: cannot access parent directories" +msgstr "getcwd: 상위 디렉터리에 접근할 수 없음" + +#: input.c:99 subst.c:6208 +#, c-format +msgid "cannot reset nodelay mode for fd %d" +msgstr "파일 서술자 %d번에 nodelay 모드를 초기화할 수 없음" + +#: input.c:266 +#, c-format +msgid "cannot allocate new file descriptor for bash input from fd %d" +msgstr "파일 서술자 %d번에서 bash 입력용 새 파일 서술자를 할당할 수 없음" + +#: input.c:274 +#, c-format +msgid "save_bash_input: buffer already exists for new fd %d" +msgstr "save_bash_input: 새 파일 서술자 %d번의 버퍼가 이미 존재함" + +#: jobs.c:543 +msgid "start_pipeline: pgrp pipe" +msgstr "start_pipeline: pgrp pipe" + +#: jobs.c:907 +#, c-format +msgid "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next" +msgstr "bgp_delete: LOOP: psi (%d) == storage[psi].bucket_next" + +#: jobs.c:960 +#, c-format +msgid "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next" +msgstr "bgp_search: LOOP: psi (%d) == storage[psi].bucket_next" + +#: jobs.c:1279 +#, c-format +msgid "forked pid %d appears in running job %d" +msgstr "포크한 PID %d번이 실행중인 작업 %d에 나타남" + +#: jobs.c:1397 +#, c-format +msgid "deleting stopped job %d with process group %ld" +msgstr "프로세스 그룹 %2$ld번의 멈춘 작업 %1$d번을 삭제중" + +#: jobs.c:1502 +#, c-format +msgid "add_process: pid %5ld (%s) marked as still alive" +msgstr "add_process: pid %5ld (%s)이(가) 여전히 살아있다고 나타남" + +#: jobs.c:1839 +#, c-format +msgid "describe_pid: %ld: no such pid" +msgstr "describe_pid: %ld: 그런 pid가 없음" + +#: jobs.c:1854 +#, c-format +msgid "Signal %d" +msgstr "시그널 %d번" + +#: jobs.c:1868 jobs.c:1894 +msgid "Done" +msgstr "완료" + +#: jobs.c:1873 siglist.c:123 +msgid "Stopped" +msgstr "멈춤" + +#: jobs.c:1877 +#, c-format +msgid "Stopped(%s)" +msgstr "멈춤(%s)" + +#: jobs.c:1881 +msgid "Running" +msgstr "실행중" + +#: jobs.c:1898 +#, c-format +msgid "Done(%d)" +msgstr "완료(%d)" + +#: jobs.c:1900 +#, c-format +msgid "Exit %d" +msgstr "나감 %d" + +#: jobs.c:1903 +msgid "Unknown status" +msgstr "알 수 없는 상태" + +#: jobs.c:1990 +#, c-format +msgid "(core dumped) " +msgstr "(코어 덤프됨) " + +#: jobs.c:2009 +#, c-format +msgid " (wd: %s)" +msgstr " (wd: %s)" + +#: jobs.c:2250 +#, c-format +msgid "child setpgid (%ld to %ld)" +msgstr "child setpgid (%ld에서 %ld(으)로)" + +#: jobs.c:2608 nojobs.c:666 +#, c-format +msgid "wait: pid %ld is not a child of this shell" +msgstr "wait: pid %ld번은 이 셸의 자식이 아님" + +#: jobs.c:2884 +#, c-format +msgid "wait_for: No record of process %ld" +msgstr "wait_for: 프로세스 %ld번의 기록 없음" + +#: jobs.c:3223 +#, c-format +msgid "wait_for_job: job %d is stopped" +msgstr "wait_for_job: 작업 %d번이 멈춤" + +#: jobs.c:3551 +#, c-format +msgid "%s: no current jobs" +msgstr "%s: 현재 작업이 없음" + +#: jobs.c:3558 +#, c-format +msgid "%s: job has terminated" +msgstr "%s: 작업이 종료됨" + +#: jobs.c:3567 +#, c-format +msgid "%s: job %d already in background" +msgstr "%s: 작업 %d번은 이미 백그라운드에 있음" + +#: jobs.c:3793 +msgid "waitchld: turning on WNOHANG to avoid indefinite block" +msgstr "waitchld: 미지정 차단 동작 회피 목적으로 WNOHANG를 켜는 중" + +#: jobs.c:4307 +#, c-format +msgid "%s: line %d: " +msgstr "%s: 줄 %d: " + +#: jobs.c:4321 nojobs.c:921 +#, c-format +msgid " (core dumped)" +msgstr " (코어 덤프됨)" + +#: jobs.c:4333 jobs.c:4346 +#, c-format +msgid "(wd now: %s)\n" +msgstr "(wd now: %s)\n" + +#: jobs.c:4378 +msgid "initialize_job_control: getpgrp failed" +msgstr "initialize_job_control: getpgrp 실패" + +#: jobs.c:4434 +msgid "initialize_job_control: no job control in background" +msgstr "initialize_job_control: 백그라운드에 작업 컨트롤 없음" + +#: jobs.c:4450 +msgid "initialize_job_control: line discipline" +msgstr "initialize_job_control: 라인 제어" + +#: jobs.c:4460 +msgid "initialize_job_control: setpgid" +msgstr "initialize_job_control: setpgid" + +#: jobs.c:4481 jobs.c:4490 +#, c-format +msgid "cannot set terminal process group (%d)" +msgstr "터미털 프로세스 그룹(%d)을 설정할 수 없음" + +#: jobs.c:4495 +msgid "no job control in this shell" +msgstr "이 셸에 작업 제어 없음" + +#: lib/malloc/malloc.c:367 +#, c-format +msgid "malloc: failed assertion: %s\n" +msgstr "malloc: assertion 실패: %s\n" + +#: lib/malloc/malloc.c:383 +#, c-format +msgid "" +"\r\n" +"malloc: %s:%d: assertion botched\r\n" +msgstr "" +"\r\n" +"malloc: %s:%d: assertion 망가짐\r\n" + +#: lib/malloc/malloc.c:384 lib/malloc/malloc.c:941 +msgid "unknown" +msgstr "알 수 없음" + +#: lib/malloc/malloc.c:892 +msgid "malloc: block on free list clobbered" +msgstr "malloc: 해제 목록 처리중 중단" + +#: lib/malloc/malloc.c:980 +msgid "free: called with already freed block argument" +msgstr "free: 이미 해제된 블록 인자를 가지고 호출됨" + +#: lib/malloc/malloc.c:983 +msgid "free: called with unallocated block argument" +msgstr "free: 할당되지 않은 블록 인자와 호출됨" + +#: lib/malloc/malloc.c:1001 +msgid "free: underflow detected; mh_nbytes out of range" +msgstr "free: 언더플로우 감지! mh_nbytes가 범위를 벗어남" + +#: lib/malloc/malloc.c:1007 +msgid "free: underflow detected; magic8 corrupted" +msgstr "free: 언더플로우 감지! magic8 손상" + +#: lib/malloc/malloc.c:1014 +msgid "free: start and end chunk sizes differ" +msgstr "free: 시작과 끝의 청크 사이즈가 다름" + +#: lib/malloc/malloc.c:1176 +msgid "realloc: called with unallocated block argument" +msgstr "realloc: 할당되지 않은 블록 인자를 가지고 호출됨" + +#: lib/malloc/malloc.c:1191 +msgid "realloc: underflow detected; mh_nbytes out of range" +msgstr "realloc: 언더플로우 감지! mh_nbytes가 범위를 벗어남" + +#: lib/malloc/malloc.c:1197 +msgid "realloc: underflow detected; magic8 corrupted" +msgstr "realloc: 언더플로우 감지! magic8 손상" + +#: lib/malloc/malloc.c:1205 +msgid "realloc: start and end chunk sizes differ" +msgstr "realloc: 시작과 끝의 청크 사이즈가 다름" + +#: lib/malloc/table.c:191 +#, c-format +msgid "register_alloc: alloc table is full with FIND_ALLOC?\n" +msgstr "register_alloc: FIND_ALLOC이 할당 테이블이 가득참?\n" + +#: lib/malloc/table.c:200 +#, c-format +msgid "register_alloc: %p already in table as allocated?\n" +msgstr "register_alloc: %p이(가) 할당한 테이블에 있음?\n" + +#: lib/malloc/table.c:253 +#, c-format +msgid "register_free: %p already in table as free?\n" +msgstr "register_free: %p이(가) 이미 해제한 테이블에 있음?\n" + +#: lib/sh/fmtulong.c:102 +msgid "invalid base" +msgstr "부적절한 진법" + +#: lib/sh/netopen.c:168 +#, c-format +msgid "%s: host unknown" +msgstr "%s: 알 수 없는 호스트" + +#: lib/sh/netopen.c:175 +#, c-format +msgid "%s: invalid service" +msgstr "%s: 부적절한 서비스" + +#: lib/sh/netopen.c:306 +#, c-format +msgid "%s: bad network path specification" +msgstr "%s: 잘못된 네트워크 경로 사양" + +#: lib/sh/netopen.c:347 +msgid "network operations not supported" +msgstr "네트워크 작업은 지원되지 않음" + +#: locale.c:219 +#, c-format +msgid "setlocale: LC_ALL: cannot change locale (%s)" +msgstr "setlocale: LC_ALL: 로캘을 바꿀 수 없음 (%s)" + +#: locale.c:221 +#, c-format +msgid "setlocale: LC_ALL: cannot change locale (%s): %s" +msgstr "setlocale: LC_ALL: 로캘을 바꿀 수 없음 (%s): %s" + +#: locale.c:294 +#, c-format +msgid "setlocale: %s: cannot change locale (%s)" +msgstr "setlocale: %s: 로캘을 바꿀 수 없음 (%s)" + +#: locale.c:296 +#, c-format +msgid "setlocale: %s: cannot change locale (%s): %s" +msgstr "setlocale: %s: 로캘을 바꿀 수 없음 (%s): %s" + +#: mailcheck.c:439 +msgid "You have mail in $_" +msgstr "$_에 메일이 있습니다" + +#: mailcheck.c:464 +msgid "You have new mail in $_" +msgstr "$_에 새로운 메일이 있습니다" + +#: mailcheck.c:480 +#, c-format +msgid "The mail in %s has been read\n" +msgstr "%s의 메일을 읽었습니다\n" + +#: make_cmd.c:314 +msgid "syntax error: arithmetic expression required" +msgstr "문법 오류: 산술 표현식이 필요함" + +#: make_cmd.c:316 +msgid "syntax error: `;' unexpected" +msgstr "문법 오류: ';' 필요하지 않음" + +#: make_cmd.c:317 +#, c-format +msgid "syntax error: `((%s))'" +msgstr "문법 오류: `((%s))'" + +#: make_cmd.c:569 +#, c-format +msgid "make_here_document: bad instruction type %d" +msgstr "make_here_document: 잘못된 명령어 형식 %d" + +#: make_cmd.c:668 +#, c-format +msgid "here-document at line %d delimited by end-of-file (wanted `%s')" +msgstr "here-document가 %d번 행에서 파일의 끝으로 구분함 (`%s'아(가) 필요함)" + +#: make_cmd.c:769 +#, c-format +msgid "make_redirection: redirection instruction `%d' out of range" +msgstr "make_redirection: 방향재지정 처리 명령어 `%d' 범위 벗어남" + +#: parse.y:2428 +#, c-format +msgid "shell_getc: shell_input_line_size (%zu) exceeds SIZE_MAX (%lu): line truncated" +msgstr "shell_getc: shell_input_line_size(%zu)가 SIZE_MAX(%lu)를 초과함: 줄 잘림" + +#: parse.y:2921 +msgid "maximum here-document count exceeded" +msgstr "최대 here-document 카운트 초과" + +#: parse.y:3684 parse.y:4244 parse.y:6148 +#, c-format +msgid "unexpected EOF while looking for matching `%c'" +msgstr "`%c'을(를) 찾는 도중 예상치 못한 파일의 끝" + +#: parse.y:4452 +msgid "unexpected EOF while looking for `]]'" +msgstr "']]'를 찾던 도중 예상치 못한 파일의 끝" + +#: parse.y:4457 +#, c-format +msgid "syntax error in conditional expression: unexpected token `%s'" +msgstr "조건 표현식에 문법 오류: 예상치 못한 토큰 `%s'" + +#: parse.y:4461 +msgid "syntax error in conditional expression" +msgstr "조건 표현식에 문법 오류" + +#: parse.y:4539 +#, c-format +msgid "unexpected token `%s', expected `)'" +msgstr "예상치 못한 토큰 `%s', ')' 필요함" + +#: parse.y:4543 +msgid "expected `)'" +msgstr "')' 필요함" + +#: parse.y:4571 +#, c-format +msgid "unexpected argument `%s' to conditional unary operator" +msgstr "조건 단항 연산자에 예기치 않은 인자 `%s'" + +#: parse.y:4575 +msgid "unexpected argument to conditional unary operator" +msgstr "조건 단항 연산자에 예기치 않은 인자" + +#: parse.y:4621 +#, c-format +msgid "unexpected token `%s', conditional binary operator expected" +msgstr "예기치 않은 토큰 `%s', 조건 이항 연산자 필요함" + +#: parse.y:4625 +msgid "conditional binary operator expected" +msgstr "조건 이항 연산자 필요함" + +#: parse.y:4647 +#, c-format +msgid "unexpected argument `%s' to conditional binary operator" +msgstr "조건 이항 연산자에 대해 예기치 않은 인자 `%s'" + +#: parse.y:4651 +msgid "unexpected argument to conditional binary operator" +msgstr "조건 이항 연산자에 대해 예기치 않은 인자" + +#: parse.y:4662 +#, c-format +msgid "unexpected token `%c' in conditional command" +msgstr "조건 명령어에서 예기치 않은 토큰 `%c'" + +#: parse.y:4665 +#, c-format +msgid "unexpected token `%s' in conditional command" +msgstr "조건 명령어에서 예기치 않은 토큰 `%s'" + +#: parse.y:4669 +#, c-format +msgid "unexpected token %d in conditional command" +msgstr "조건 명령어에서 예기치 않은 토큰 %d" + +#: parse.y:6118 +#, c-format +msgid "syntax error near unexpected token `%s'" +msgstr "예기치 않은 토큰 `%s' 근처에서 문법 오류" + +#: parse.y:6137 +#, c-format +msgid "syntax error near `%s'" +msgstr "`%s' 근처에서 문법 오류" + +#: parse.y:6151 +msgid "syntax error: unexpected end of file" +msgstr "문법 오류: 예기치 않은 파일의 끝" + +#: parse.y:6151 +msgid "syntax error" +msgstr "문법 오류" + +#: parse.y:6216 +#, c-format +msgid "Use \"%s\" to leave the shell.\n" +msgstr "셸을 나가려면 \"%s\" 명령을 사용하십시오.\n" + +#: parse.y:6394 +msgid "unexpected EOF while looking for matching `)'" +msgstr "맞는 ')'를 찾던 도중 예기치 않은 파일의 끝" + +#: pcomplete.c:1132 +#, c-format +msgid "completion: function `%s' not found" +msgstr "completion: `%s' 함수를 찾을 수 없음" + +#: pcomplete.c:1722 +#, c-format +msgid "programmable_completion: %s: possible retry loop" +msgstr "programmable_completion: %s: 가능한 재시도 루프" + +#: pcomplib.c:182 +#, c-format +msgid "progcomp_insert: %s: NULL COMPSPEC" +msgstr "progcomp_insert: %s: NULL COMPSPEC" + +#: print_cmd.c:302 +#, c-format +msgid "print_command: bad connector `%d'" +msgstr "print_command: 잘못된 커넥터 `%d'" + +#: print_cmd.c:375 +#, c-format +msgid "xtrace_set: %d: invalid file descriptor" +msgstr "xtrace_set: %d: 부적절한 파일 서술자" + +#: print_cmd.c:380 +msgid "xtrace_set: NULL file pointer" +msgstr "xtrace_set: NULL 파일 포인터" + +#: print_cmd.c:384 +#, c-format +msgid "xtrace fd (%d) != fileno xtrace fp (%d)" +msgstr "xtrace fd (%d) != fileno xtrace fp (%d)" + +#: print_cmd.c:1545 +#, c-format +msgid "cprintf: `%c': invalid format character" +msgstr "cprintf: `%c': 잘못된 서식 문자" + +#: redir.c:150 redir.c:198 +msgid "file descriptor out of range" +msgstr "파일 서술자 범위 벗어남" + +#: redir.c:205 +#, c-format +msgid "%s: ambiguous redirect" +msgstr "%s: 모호한 리다이렉트" + +#: redir.c:209 +#, c-format +msgid "%s: cannot overwrite existing file" +msgstr "%s: 이미 있는 파일을 덮어쓸 수 없음" + +#: redir.c:214 +#, c-format +msgid "%s: restricted: cannot redirect output" +msgstr "%s: 제한됨: 출력을 방향 재지정할 수 없음" + +#: redir.c:219 +#, c-format +msgid "cannot create temp file for here-document: %s" +msgstr "here-document를 위한 임시 파일을 생성할 수 없음: %s" + +#: redir.c:223 +#, c-format +msgid "%s: cannot assign fd to variable" +msgstr "%s: 파일 서술자를 변수에 할당할 수 없음" + +#: redir.c:650 +msgid "/dev/(tcp|udp)/host/port not supported without networking" +msgstr "/dev/(tcp|udp)/host/port는 네트워킹 없이 지원하지 않음" + +#: redir.c:945 redir.c:1065 redir.c:1130 redir.c:1303 +msgid "redirection error: cannot duplicate fd" +msgstr "방향재지정 처리 오류: 파일 서술자를 복제할 수 없음" + +#: shell.c:353 +msgid "could not find /tmp, please create!" +msgstr "/tmp를 찾을 수 없음, 만드십시오!" + +#: shell.c:357 +msgid "/tmp must be a valid directory name" +msgstr "/tmp는 반드시 적절한 디렉터리 이름이어야 함" + +#: shell.c:826 +msgid "pretty-printing mode ignored in interactive shells" +msgstr "대화형 셸에서는 정돈 출력 모드를 무시함" + +#: shell.c:972 +#, c-format +msgid "%c%c: invalid option" +msgstr "%c%c: 부적절한 옵션" + +#: shell.c:1343 +#, c-format +msgid "cannot set uid to %d: effective uid %d" +msgstr "uid를 %d번으로 설정할 수 없음: 효력상 사용자 ID %d번" + +#: shell.c:1354 +#, c-format +msgid "cannot set gid to %d: effective gid %d" +msgstr "gid를 %d번으로 설정할 수 없음: 효력상 그룹 ID %d번" + +#: shell.c:1544 +msgid "cannot start debugger; debugging mode disabled" +msgstr "디버거를 시작할 수 없음! 디버깅 모드 꺼짐" + +#: shell.c:1658 +#, c-format +msgid "%s: Is a directory" +msgstr "%s: 디렉터리임" + +#: shell.c:1907 +msgid "I have no name!" +msgstr "이름 없음!" + +#: shell.c:2061 +#, c-format +msgid "GNU bash, version %s-(%s)\n" +msgstr "GNU 배시, 버전 %s-(%s)\n" + +#: shell.c:2062 +#, c-format +msgid "" +"Usage:\t%s [GNU long option] [option] ...\n" +"\t%s [GNU long option] [option] script-file ...\n" +msgstr "" +"사용법:\t%s [] [<옵션>] ...\n" +"\t%s [] [<옵션>] <스크립트파일> ...\n" + +#: shell.c:2064 +msgid "GNU long options:\n" +msgstr "GNU 긴 옵션:\n" + +#: shell.c:2068 +msgid "Shell options:\n" +msgstr "셸 옵션:\n" + +#: shell.c:2069 +msgid "\t-ilrsD or -c command or -O shopt_option\t\t(invocation only)\n" +msgstr "\t-ilrsD 또는 -c <명령> 또는 -O shopt_option\t\t(invocation 전용)\n" + +#: shell.c:2088 +#, c-format +msgid "\t-%s or -o option\n" +msgstr "\t-%s 또는 -o 옵션\n" + +#: shell.c:2094 +#, c-format +msgid "Type `%s -c \"help set\"' for more information about shell options.\n" +msgstr "`%s -c \"help set\"' 명령을 사용하면 셸 옵션에 관해 더 많은 정보를 확인할 수 있습니다.\n" + +#: shell.c:2095 +#, c-format +msgid "Type `%s -c help' for more information about shell builtin commands.\n" +msgstr "`%s -c help' 명령을 사용하면 셸 내장 명령어에 관해 더 많은 정보를 확인할 수 있습니다.\n" + +#: shell.c:2096 +#, c-format +msgid "Use the `bashbug' command to report bugs.\n" +msgstr "버그를 보고하려면 'bashbug' 명령을 사용하십시오.\n" + +#: shell.c:2098 +#, c-format +msgid "bash home page: \n" +msgstr "bash 홈페이지: \n" + +#: shell.c:2099 +#, c-format +msgid "General help using GNU software: \n" +msgstr "GNU 소프트웨어 사용자 일반 도움말: \n" + +#: sig.c:765 +#, c-format +msgid "sigprocmask: %d: invalid operation" +msgstr "sigprocmask: %d: 부적절한 작업" + +#: siglist.c:48 +msgid "Bogus signal" +msgstr "가짜 시그널" + +#: siglist.c:51 +msgid "Hangup" +msgstr "수행 중단(Hangup)" + +#: siglist.c:55 +msgid "Interrupt" +msgstr "인터럽트" + +#: siglist.c:59 +msgid "Quit" +msgstr "나가기" + +#: siglist.c:63 +msgid "Illegal instruction" +msgstr "부적절한 명령" + +#: siglist.c:67 +msgid "BPT trace/trap" +msgstr "BPT 추적/중단" + +#: siglist.c:75 +msgid "ABORT instruction" +msgstr "ABORT 명령" + +#: siglist.c:79 +msgid "EMT instruction" +msgstr "EMT 명령" + +#: siglist.c:83 +msgid "Floating point exception" +msgstr "부동 소수점 예외" + +#: siglist.c:87 +msgid "Killed" +msgstr "죽었음" + +#: siglist.c:91 +msgid "Bus error" +msgstr "버스 오류" + +#: siglist.c:95 +msgid "Segmentation fault" +msgstr "세그먼테이션 오류" + +#: siglist.c:99 +msgid "Bad system call" +msgstr "잘못된 시스템 콜" + +#: siglist.c:103 +msgid "Broken pipe" +msgstr "파이프 깨짐" + +#: siglist.c:107 +msgid "Alarm clock" +msgstr "알림 시계" + +#: siglist.c:111 +msgid "Terminated" +msgstr "중단됨" + +#: siglist.c:115 +msgid "Urgent IO condition" +msgstr "긴급 입출력 상태" + +#: siglist.c:119 +msgid "Stopped (signal)" +msgstr "멈춤 (시그널)" + +#: siglist.c:127 +msgid "Continue" +msgstr "계속" + +#: siglist.c:135 +msgid "Child death or stop" +msgstr "하위 요소가 죽거나 멈춤" + +#: siglist.c:139 +msgid "Stopped (tty input)" +msgstr "멈춤 (tty 입력)" + +#: siglist.c:143 +msgid "Stopped (tty output)" +msgstr "멈춤 (tty 출력)" + +#: siglist.c:147 +msgid "I/O ready" +msgstr "I/O 준비" + +#: siglist.c:151 +msgid "CPU limit" +msgstr "CPU 제한" + +#: siglist.c:155 +msgid "File limit" +msgstr "파일 제한" + +#: siglist.c:159 +msgid "Alarm (virtual)" +msgstr "알림 (가상)" + +#: siglist.c:163 +msgid "Alarm (profile)" +msgstr "알림 (프로파일)" + +#: siglist.c:167 +msgid "Window changed" +msgstr "윈도우 바뀜" + +#: siglist.c:171 +msgid "Record lock" +msgstr "기록 잠금" + +#: siglist.c:175 +msgid "User signal 1" +msgstr "사용자 시그널 1" + +#: siglist.c:179 +msgid "User signal 2" +msgstr "사용자 시그널 2" + +#: siglist.c:183 +msgid "HFT input data pending" +msgstr "HFT 입력 데이터 대기중" + +#: siglist.c:187 +msgid "power failure imminent" +msgstr "전원 문제 임박" + +#: siglist.c:191 +msgid "system crash imminent" +msgstr "시스템 충돌 임박" + +#: siglist.c:195 +msgid "migrate process to another CPU" +msgstr "다른 CPU로 프로세스 이전" + +#: siglist.c:199 +msgid "programming error" +msgstr "프로그래밍 오류" + +#: siglist.c:203 +msgid "HFT monitor mode granted" +msgstr "HFT 모니터 모드 승인함" + +#: siglist.c:207 +msgid "HFT monitor mode retracted" +msgstr "HFT 모니터 모드 철회함" + +#: siglist.c:211 +msgid "HFT sound sequence has completed" +msgstr "HFT 사운드 시퀀스가 끝남" + +#: siglist.c:215 +msgid "Information request" +msgstr "정보 요청" + +#: siglist.c:223 siglist.c:225 +#, c-format +msgid "Unknown Signal #%d" +msgstr "알 수 없는 시그널 #%d" + +#: subst.c:1480 subst.c:1670 +#, c-format +msgid "bad substitution: no closing `%s' in %s" +msgstr "잘못된 대체: %2$s에 닫는 `%1$s' 없음" + +#: subst.c:3307 +#, c-format +msgid "%s: cannot assign list to array member" +msgstr "%s: 리스트를 배열 멤버로 할당할 수 없음" + +#: subst.c:6048 subst.c:6064 +msgid "cannot make pipe for process substitution" +msgstr "프로세스 대체용 파이프를 만들 수 없음" + +#: subst.c:6124 +msgid "cannot make child for process substitution" +msgstr "프로세스 대체용 하위 요소를 만들 수 없음" + +#: subst.c:6198 +#, c-format +msgid "cannot open named pipe %s for reading" +msgstr "읽기용 명명 파이프 %s을(를) 열 수 없음" + +#: subst.c:6200 +#, c-format +msgid "cannot open named pipe %s for writing" +msgstr "쓰기용 명명 파이프 %s을(를) 열 수 없음" + +#: subst.c:6223 +#, c-format +msgid "cannot duplicate named pipe %s as fd %d" +msgstr "명명된 파이프 %s을(를) 파일 서술자 %d번으로 복제할 수 없음" + +#: subst.c:6370 +msgid "command substitution: ignored null byte in input" +msgstr "command substitution: 입력의 null 바이트 무시" + +#: subst.c:6533 +msgid "cannot make pipe for command substitution" +msgstr "명령어 대체용 파이프를 만들 수 없음" + +#: subst.c:6580 +msgid "cannot make child for command substitution" +msgstr "명령어 대체용 하위 요소를 만들 수 없음" + +#: subst.c:6613 +msgid "command_substitute: cannot duplicate pipe as fd 1" +msgstr "command_substitute: 파이프를 파일 서술자 1번으로 복제할 수 없음" + +#: subst.c:7082 subst.c:10252 +#, c-format +msgid "%s: invalid variable name for name reference" +msgstr "%s: 이름 참조에 부적절한 변수 이름" + +#: subst.c:7178 subst.c:7196 subst.c:7369 +#, c-format +msgid "%s: invalid indirect expansion" +msgstr "%s: 부적절한 간접 확장" + +#: subst.c:7212 subst.c:7377 +#, c-format +msgid "%s: invalid variable name" +msgstr "%s: 부적절한 변수 이름" + +#: subst.c:7478 +#, c-format +msgid "%s: parameter not set" +msgstr "%s: 매개변수값 설정 안함" + +#: subst.c:7480 +#, c-format +msgid "%s: parameter null or not set" +msgstr "%s: 매개변수 값이 null 이거나 설정하지 않음" + +#: subst.c:7727 subst.c:7742 +#, c-format +msgid "%s: substring expression < 0" +msgstr "%s: 부분 문자열 표현식 < 0" + +#: subst.c:9560 subst.c:9587 +#, c-format +msgid "%s: bad substitution" +msgstr "%s: 잘못된 대체" + +#: subst.c:9678 +#, c-format +msgid "$%s: cannot assign in this way" +msgstr "$%s: 이 방법으로 할당할 수 없음" + +#: subst.c:10111 +msgid "future versions of the shell will force evaluation as an arithmetic substitution" +msgstr "향후 버전의 셸에서는 산술 대체로 연산이 강제됩니다" + +#: subst.c:10795 +#, c-format +msgid "bad substitution: no closing \"`\" in %s" +msgstr "잘못된 대체: %s에 닫는 \"`\" 없음" + +#: subst.c:11874 +#, c-format +msgid "no match: %s" +msgstr "일치 없음: %s" + +#: test.c:147 +msgid "argument expected" +msgstr "인자 필요함" + +#: test.c:156 +#, c-format +msgid "%s: integer expression expected" +msgstr "%s: 정수 표현식 필요함" + +#: test.c:265 +msgid "`)' expected" +msgstr "`)'가 필요함" + +#: test.c:267 +#, c-format +msgid "`)' expected, found %s" +msgstr "`)'가 있어야 하지만, %s이(가) 있습니다" + +#: test.c:469 test.c:814 +#, c-format +msgid "%s: binary operator expected" +msgstr "%s: 이항 연산자가 필요합니다" + +#: test.c:771 test.c:774 +#, c-format +msgid "%s: unary operator expected" +msgstr "%s: 단항 연산자가 필요합니다" + +#: test.c:896 +msgid "missing `]'" +msgstr "']' 빠짐" + +#: test.c:914 +#, c-format +msgid "syntax error: `%s' unexpected" +msgstr "문법 오류: `%s' 필요하지 않음" + +#: trap.c:220 +msgid "invalid signal number" +msgstr "부적절한 시그널 번호" + +#: trap.c:323 +#, c-format +msgid "trap handler: maximum trap handler level exceeded (%d)" +msgstr "trap handler: 최대 트랩 핸들러 레벨 초과 (%d)" + +#: trap.c:412 +#, c-format +msgid "run_pending_traps: bad value in trap_list[%d]: %p" +msgstr "run_pending_traps: trap_list[%d]에 잘못된 값: %p" + +#: trap.c:416 +#, c-format +msgid "run_pending_traps: signal handler is SIG_DFL, resending %d (%s) to myself" +msgstr "run_pending_traps: 시그널 핸들러는 SIG_DFL 이고, %d (%s)를 자신에게 다시 보내는 중" + +#: trap.c:509 +#, c-format +msgid "trap_handler: bad signal %d" +msgstr "trap_handler: 잘못된 시그널 %d번" + +#: variables.c:424 +#, c-format +msgid "error importing function definition for `%s'" +msgstr "`%s'의 함수 정의 가져오기 오류" + +#: variables.c:838 +#, c-format +msgid "shell level (%d) too high, resetting to 1" +msgstr "셸 레벨 (%d)이 너무 높습니다, 1로 재설정합니다" + +#: variables.c:2642 +msgid "make_local_variable: no function context at current scope" +msgstr "make_local_variable: 현재 범위에서 함수 컨텍스트 없음" + +#: variables.c:2661 +#, c-format +msgid "%s: variable may not be assigned value" +msgstr "%s: 변수는 할당 값이 아님" + +#: variables.c:2818 variables.c:2874 +#, c-format +msgid "%s: cannot inherit value from incompatible type" +msgstr "%s: 비호환 형식의 값을 가져올 수 없음" + +#: variables.c:3459 +#, c-format +msgid "%s: assigning integer to name reference" +msgstr "%s: 이름 참조에 정수를 할당하고 있음" + +#: variables.c:4390 +msgid "all_local_variables: no function context at current scope" +msgstr "all_local_variables: 현재 범위에서 함수 컨텍스트 없음" + +#: variables.c:4757 +#, c-format +msgid "%s has null exportstr" +msgstr "%s이(가) null exportstr을 가짐" + +#: variables.c:4762 variables.c:4771 +#, c-format +msgid "invalid character %d in exportstr for %s" +msgstr "%2$s의 exportstr에서 부적절한 문자 %1$d" + +#: variables.c:4777 +#, c-format +msgid "no `=' in exportstr for %s" +msgstr "%s의 exportstr에 '=' 없음" + +#: variables.c:5317 +msgid "pop_var_context: head of shell_variables not a function context" +msgstr "pop_var_context: shell_variables의 시작이 함수의 컨텍스트가 아님" + +#: variables.c:5330 +msgid "pop_var_context: no global_variables context" +msgstr "pop_var_context: 컨텍스트에 global_variables 없음" + +#: variables.c:5410 +msgid "pop_scope: head of shell_variables not a temporary environment scope" +msgstr "pop_scope: shell_variables의 시작이 임시 환경 범위가 아님" + +#: variables.c:6400 +#, c-format +msgid "%s: %s: cannot open as FILE" +msgstr "%s: %s: <파일>로 열 수 없음" + +#: variables.c:6405 +#, c-format +msgid "%s: %s: invalid value for trace file descriptor" +msgstr "%s: %s: 추척 파일 서술자에 부적절한 값" + +#: variables.c:6450 +#, c-format +msgid "%s: %s: compatibility value out of range" +msgstr "%s: %s: 호환 값이 범위를 벗어남" + +#: version.c:46 version2.c:46 +msgid "Copyright (C) 2022 Free Software Foundation, Inc." +msgstr "Copyright (C) 2022 Free Software Foundation, Inc." + +#: version.c:47 version2.c:47 +msgid "License GPLv3+: GNU GPL version 3 or later \n" +msgstr "라이선스 GPLv3+: GNU GPL 버전 3 이상 \n" + +#: version.c:86 version2.c:86 +#, c-format +msgid "GNU bash, version %s (%s)\n" +msgstr "GNU bash, 버전 %s (%s)\n" + +#: version.c:91 version2.c:91 +msgid "This is free software; you are free to change and redistribute it." +msgstr "이 프로그램은 자유 소프트웨어입니다. 자유롭게 바꾸고 재배포할 수 있습니다." + +#: version.c:92 version2.c:92 +msgid "There is NO WARRANTY, to the extent permitted by law." +msgstr "법률이 허용하는 모든 범위내의 보증은 없습니다." + +#: xmalloc.c:93 +#, c-format +msgid "%s: cannot allocate %lu bytes (%lu bytes allocated)" +msgstr "%s: %lu 바이트를 할당할 수 없음 (%lu 바이트 할당함)" + +#: xmalloc.c:95 +#, c-format +msgid "%s: cannot allocate %lu bytes" +msgstr "%s: %lu 바이트를 할당할 수 없음" + +#: xmalloc.c:165 +#, c-format +msgid "%s: %s:%d: cannot allocate %lu bytes (%lu bytes allocated)" +msgstr "%s: %s:%d: %lu 바이트를 할당할 수 없음 (%lu 바이트 할당함)" + +#: xmalloc.c:167 +#, c-format +msgid "%s: %s:%d: cannot allocate %lu bytes" +msgstr "%s: %s:%d: %lu 바이트를 할당할 수 없음" + +#: builtins.c:45 +msgid "alias [-p] [name[=value] ... ]" +msgstr "alias [-p] [<이름>[=<값>] ... ]" + +#: builtins.c:49 +msgid "unalias [-a] name [name ...]" +msgstr "unalias [-a] <이름> [<이름> ...]" + +#: builtins.c:53 +msgid "bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-x keyseq:shell-command] [keyseq:readline-function or readline-command]" +msgstr "bind [-lpsvPSVX] [-m <키매핑>] [-f <파일이름>] [-q <이름>] [-u <이름>] [-r <키시퀀스>] [-x <키시퀀스>:<셸명령>] [<키시퀀스>:<행읽기함수> 또는 <행읽기명령>]" + +#: builtins.c:56 +msgid "break [n]" +msgstr "break [<번호>]" + +#: builtins.c:58 +msgid "continue [n]" +msgstr "continue [<번호>]" + +#: builtins.c:60 +msgid "builtin [shell-builtin [arg ...]]" +msgstr "builtin [<셸내장명령> [<인자> ...]]" + +#: builtins.c:63 +msgid "caller [expr]" +msgstr "caller [<표현식>]" + +#: builtins.c:66 +msgid "cd [-L|[-P [-e]] [-@]] [dir]" +msgstr "cd [-L|[-P [-e]] [-@]] [<디렉터리>]" + +#: builtins.c:68 +msgid "pwd [-LP]" +msgstr "pwd [-LP]" + +#: builtins.c:76 +msgid "command [-pVv] command [arg ...]" +msgstr "<명령> [-pVv] <명령> [<인자> ...]" + +#: builtins.c:78 +msgid "declare [-aAfFgiIlnrtux] [name[=value] ...] or declare -p [-aAfFilnrtux] [name ...]" +msgstr "declare [-aAfFgilnrtux] [-p] [<이름>[=<값>] ...]" + +#: builtins.c:80 +msgid "typeset [-aAfFgiIlnrtux] name[=value] ... or typeset -p [-aAfFilnrtux] [name ...]" +msgstr "typeset [-aAfFgilnrtux] [-p] <이름>[=<값>] ..." + +#: builtins.c:82 +msgid "local [option] name[=value] ..." +msgstr "local [<옵션>] <이름>[=<값>] ..." + +#: builtins.c:85 +msgid "echo [-neE] [arg ...]" +msgstr "echo [-neE] [<인자> ...]" + +#: builtins.c:89 +msgid "echo [-n] [arg ...]" +msgstr "echo [-n] [<인자> ...]" + +#: builtins.c:92 +msgid "enable [-a] [-dnps] [-f filename] [name ...]" +msgstr "enable [-a] [-dnps] [-f <파일이름>] [<이름> ...]" + +#: builtins.c:94 +msgid "eval [arg ...]" +msgstr "eval [인자 ...]" + +#: builtins.c:96 +msgid "getopts optstring name [arg ...]" +msgstr "getopts optstring name [<인자> ...]" + +#: builtins.c:98 +msgid "exec [-cl] [-a name] [command [argument ...]] [redirection ...]" +msgstr "exec [-cl] [-a <이름>] [<명령> [<인자> ...]] [<방향재지정> ...]" + +#: builtins.c:100 +msgid "exit [n]" +msgstr "exit [<번호>]" + +#: builtins.c:102 +msgid "logout [n]" +msgstr "logout [<번호>]" + +#: builtins.c:105 +msgid "fc [-e ename] [-lnr] [first] [last] or fc -s [pat=rep] [command]" +msgstr "fc [-e <편집기이름>] [-lnr] [<처음>] [<종결>] 또는 fc -s [<패턴>=<대체>] [<명령>]" + +#: builtins.c:109 +msgid "fg [job_spec]" +msgstr "fg []" + +#: builtins.c:113 +msgid "bg [job_spec ...]" +msgstr "bg [ ...]" + +#: builtins.c:116 +msgid "hash [-lr] [-p pathname] [-dt] [name ...]" +msgstr "hash [-lr] [-p <경로이름>] [-dt] [<이름> ...]" + +#: builtins.c:119 +msgid "help [-dms] [pattern ...]" +msgstr "help [-dms] [<패턴> ...]" + +#: builtins.c:123 +msgid "history [-c] [-d offset] [n] or history -anrw [filename] or history -ps arg [arg...]" +msgstr "history [-c] [-d <오프셋>] [n] 또는 history -anrw [<파일이름>] 또는 history -ps <인자> [<인자>...]" + +#: builtins.c:127 +msgid "jobs [-lnprs] [jobspec ...] or jobs -x command [args]" +msgstr "jobs [-lnprs] [jobspec ...] 또는 jobs -x command [args]" + +#: builtins.c:131 +msgid "disown [-h] [-ar] [jobspec ... | pid ...]" +msgstr "disown [-h] [-ar] [ ... | ...]" + +#: builtins.c:134 +msgid "kill [-s sigspec | -n signum | -sigspec] pid | jobspec ... or kill -l [sigspec]" +msgstr "kill [-s <시그널명세> | -n <시그널번호> | -<시그널명세>] | ... 또는 kill -l [<시그널명세>]" + +#: builtins.c:136 +msgid "let arg [arg ...]" +msgstr "let <인자> [<인자> ...]" + +#: builtins.c:138 +msgid "read [-ers] [-a array] [-d delim] [-i text] [-n nchars] [-N nchars] [-p prompt] [-t timeout] [-u fd] [name ...]" +msgstr "read [-ers] [-a <배열>] [-d <구분자>] [-i <텍스트>] [-n <문자수>] [-N <문자수>] [-p <프롬프트>] [-t <제한시간>] [-u <파일서술자>] [<이름> ...]" + +#: builtins.c:140 +msgid "return [n]" +msgstr "return [n]" + +#: builtins.c:142 +msgid "set [-abefhkmnptuvxBCEHPT] [-o option-name] [--] [-] [arg ...]" +msgstr "set [-abefhkmnptuvxBCHP] [-o <옵션-이름>] [--] [<인자> ...]" + +#: builtins.c:144 +msgid "unset [-f] [-v] [-n] [name ...]" +msgstr "unset [-f] [-v] [-n] [<이름> ...]" + +#: builtins.c:146 +msgid "export [-fn] [name[=value] ...] or export -p" +msgstr "export [-fn] [<이름>[=<값>] ...] 또는 export -p" + +#: builtins.c:148 +msgid "readonly [-aAf] [name[=value] ...] or readonly -p" +msgstr "readonly [-aAf] [<이름>[=<값>] ...] 또는 readonly -p" + +#: builtins.c:150 +msgid "shift [n]" +msgstr "shift [n]" + +#: builtins.c:152 +msgid "source filename [arguments]" +msgstr "source <파일이름> [<인자>]" + +#: builtins.c:154 +msgid ". filename [arguments]" +msgstr ". <파일이름> [<인자>]" + +#: builtins.c:157 +msgid "suspend [-f]" +msgstr "suspend [-f]" + +#: builtins.c:160 +msgid "test [expr]" +msgstr "test [<표현식>]" + +#: builtins.c:162 +msgid "[ arg... ]" +msgstr "[ <인자>... ]" + +#: builtins.c:166 +msgid "trap [-lp] [[arg] signal_spec ...]" +msgstr "trap [-lp] [[<인자>] <시그널_명세> ...]" + +#: builtins.c:168 +msgid "type [-afptP] name [name ...]" +msgstr "type [-afptP] <이름> [<이름> ...]" + +#: builtins.c:171 +msgid "ulimit [-SHabcdefiklmnpqrstuvxPRT] [limit]" +msgstr "ulimit [-SHabcdefiklmnpqrstuvxPT] [<한계값>]" + +#: builtins.c:174 +msgid "umask [-p] [-S] [mode]" +msgstr "umask [-p] [-S] [<모드>]" + +#: builtins.c:177 +msgid "wait [-fn] [-p var] [id ...]" +msgstr "wait [-fn] [ ...]" + +#: builtins.c:181 +msgid "wait [pid ...]" +msgstr "wait [ ...]" + +#: builtins.c:184 +msgid "for NAME [in WORDS ... ] ; do COMMANDS; done" +msgstr "for <이름> [in <여러단어> ... ] ; do <명령>; done" + +#: builtins.c:186 +msgid "for (( exp1; exp2; exp3 )); do COMMANDS; done" +msgstr "for (( <조건식1>; <조건식2>; <조건식3> )); do <명령>; done" + +#: builtins.c:188 +msgid "select NAME [in WORDS ... ;] do COMMANDS; done" +msgstr "select <이름> [in <여러단어> ... ;] do <명령>; done" + +#: builtins.c:190 +msgid "time [-p] pipeline" +msgstr "time [-p] <파이프라인>" + +#: builtins.c:192 +msgid "case WORD in [PATTERN [| PATTERN]...) COMMANDS ;;]... esac" +msgstr "case <단어> in [<패턴> [| <패턴>]...) <명령> ;;]... esac" + +#: builtins.c:194 +msgid "if COMMANDS; then COMMANDS; [ elif COMMANDS; then COMMANDS; ]... [ else COMMANDS; ] fi" +msgstr "if <명령>; then <명령>; [ elif <명령>; then <명령>; ]... [ else <명령>; ] fi" + +#: builtins.c:196 +msgid "while COMMANDS; do COMMANDS-2; done" +msgstr "while <명령>; do <명령-2>; done" + +#: builtins.c:198 +msgid "until COMMANDS; do COMMANDS-2; done" +msgstr "until <명령>; do <명령-2>; done" + +#: builtins.c:200 +msgid "coproc [NAME] command [redirections]" +msgstr "coproc [<이름>] <명령> [<방향재지정>]" + +#: builtins.c:202 +msgid "function name { COMMANDS ; } or name () { COMMANDS ; }" +msgstr "function <이름> { <명령> ; } 또는 <이름> () { <명령> ; }" + +#: builtins.c:204 +msgid "{ COMMANDS ; }" +msgstr "{ <명령> ; }" + +#: builtins.c:206 +msgid "job_spec [&]" +msgstr "job_spec [&]" + +#: builtins.c:208 +msgid "(( expression ))" +msgstr "(( <표현식> ))" + +#: builtins.c:210 +msgid "[[ expression ]]" +msgstr "[[ <표현식> ]]" + +#: builtins.c:212 +msgid "variables - Names and meanings of some shell variables" +msgstr "variables - 이름이자 일부 셸 변수를 의미합니다" + +#: builtins.c:215 +msgid "pushd [-n] [+N | -N | dir]" +msgstr "pushd [-n] [+<갯수> | -<갯수> | <디렉터리>]" + +#: builtins.c:219 +msgid "popd [-n] [+N | -N]" +msgstr "popd [-n] [+<갯수> | -<갯수>]" + +#: builtins.c:223 +msgid "dirs [-clpv] [+N] [-N]" +msgstr "dirs [-clpv] [+<갯수>] [-<갯수>]" + +#: builtins.c:226 +msgid "shopt [-pqsu] [-o] [optname ...]" +msgstr "shopt [-pqsu] [-o] [<옵션이름>...]" + +#: builtins.c:228 +msgid "printf [-v var] format [arguments]" +msgstr "printf [-v <변수>] <출력형식> [<인자>]" + +#: builtins.c:231 +msgid "complete [-abcdefgjksuv] [-pr] [-DEI] [-o option] [-A action] [-G globpat] [-W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [name ...]" +msgstr "complete [-abcdefgjksuv] [-pr] [-DEI] [-o <옵션>] [-A <동작>] [-G <글롭패턴>] [-W <단어목록>] [-F <함수>] [-C <명령>] [-X <필터패턴>] [-P <접두어>] [-S <접미어>] [<이름> ...]" + +#: builtins.c:235 +msgid "compgen [-abcdefgjksuv] [-o option] [-A action] [-G globpat] [-W wordlist] [-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] [word]" +msgstr "compgen [-abcdefgjksuv] [-o <옵션>] [-A <동작>] [-G <글롭패턴>] [-W <단어목록>] [-F <함수>] [-C <명령>] [-X <필터패턴>] [-P <접두어>] [-S <접미어>] [<단어>]" + +#: builtins.c:239 +msgid "compopt [-o|+o option] [-DEI] [name ...]" +msgstr "compopt [-o|+o <옵션>] [-DEI] [<이름> ...]" + +#: builtins.c:242 +msgid "mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c quantum] [array]" +msgstr "mapfile [-d <구분자>] [-n <갯수>] [-O <시작>] [-s <갯수>] [-t] [-u <파일서술자>] [-C <콜백>] [-c <양자>] [<배열>]" + +#: builtins.c:244 +msgid "readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c quantum] [array]" +msgstr "readarray [-d <구분자>] [-n <갯수>] [-O <시작>] [-s <갯수>] [-t] [-u <파일서술자>] [-C <콜백>] [-c <양자>] [<배열>]" + +#: builtins.c:256 +msgid "" +"Define or display aliases.\n" +" \n" +" Without arguments, `alias' prints the list of aliases in the reusable\n" +" form `alias NAME=VALUE' on standard output.\n" +" \n" +" Otherwise, an alias is defined for each NAME whose VALUE is given.\n" +" A trailing space in VALUE causes the next word to be checked for\n" +" alias substitution when the alias is expanded.\n" +" \n" +" Options:\n" +" -p\tprint all defined aliases in a reusable format\n" +" \n" +" Exit Status:\n" +" alias returns true unless a NAME is supplied for which no alias has been\n" +" defined." +msgstr "" +"별칭을 지정하거나 표시합니다.\n" +" \n" +" 인자가 없다면, `alias'는 `alias <이름>=<값>' 형식으로 표준 출력에\n" +" 별칭 목록을 출력합니다.\n" +" \n" +" 그렇지 않으면 <값>을 부여한 각 <이름>을 지정합니다.\n" +" <값>에 공백 문자를 덧붙이면 별칭을 확장할 때 별칭 대체 대상\n" +" 문자열의 다음 단어를 확인합니다.\n" +" \n" +" 옵션:\n" +" -p\t재사용 형식으로 지정한 모든 별칭을 출력합니다\n" +" \n" +" 종료 상태:\n" +" 별칭으로 지정한 <이름>을 확인하면 참을 반환합니다." + +#: builtins.c:278 +msgid "" +"Remove each NAME from the list of defined aliases.\n" +" \n" +" Options:\n" +" -a\tremove all alias definitions\n" +" \n" +" Return success unless a NAME is not an existing alias." +msgstr "" +"지정 별칭의 목록에서 각 <이름>을 제거합니다\n" +" \n" +" 옵션:\n" +" -a\t모든 별칭 지정 항목을 제거합니다.\n" +" \n" +" <이름>이 기존 별칭일 경우 성공을 반환합니다." + +#: builtins.c:291 +msgid "" +"Set Readline key bindings and variables.\n" +" \n" +" Bind a key sequence to a Readline function or a macro, or set a\n" +" Readline variable. The non-option argument syntax is equivalent to\n" +" that found in ~/.inputrc, but must be passed as a single argument:\n" +" e.g., bind '\"\\C-x\\C-r\": re-read-init-file'.\n" +" \n" +" Options:\n" +" -m keymap Use KEYMAP as the keymap for the duration of this\n" +" command. Acceptable keymap names are emacs,\n" +" emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move,\n" +" vi-command, and vi-insert.\n" +" -l List names of functions.\n" +" -P List function names and bindings.\n" +" -p List functions and bindings in a form that can be\n" +" reused as input.\n" +" -S List key sequences that invoke macros and their values\n" +" -s List key sequences that invoke macros and their values\n" +" in a form that can be reused as input.\n" +" -V List variable names and values\n" +" -v List variable names and values in a form that can\n" +" be reused as input.\n" +" -q function-name Query about which keys invoke the named function.\n" +" -u function-name Unbind all keys which are bound to the named function.\n" +" -r keyseq Remove the binding for KEYSEQ.\n" +" -f filename Read key bindings from FILENAME.\n" +" -x keyseq:shell-command\tCause SHELL-COMMAND to be executed when\n" +" \t\t\t\tKEYSEQ is entered.\n" +" -X List key sequences bound with -x and associated commands\n" +" in a form that can be reused as input.\n" +" \n" +" Exit Status:\n" +" bind returns 0 unless an unrecognized option is given or an error occurs." +msgstr "" +"readline 키 바인딩과 값을 설정합니다.\n" +" \n" +" 키 시퀀스를 readline 함수 또는 매크로에 바인딩하거나, readline\n" +" 변수에 설정합니다. 옵션을 지정하지 않은 인자 문법은 ~/.inputrc\n" +" 에서 찾을 수 있는 문법과 동일합니다만 단일 인자로 전달해야 합니다.\n" +" 예: bind '\"\\C-x\\C-r\": re-read-init-file'\n" +" \n" +" 옵션:\n" +" -m <키매핑> <키매핑>을 이 명령 실행동안 사용하는 키매핑\n" +" 으로 활용합니다. 허용할 수 있는 키매핑 이름은 emacs,\n" +" emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move,\n" +" vi-command, vi-insert가 있습니다.\n" +" -l 함수 이름 목록.\n" +" -P 함수 이름 및 바인딩 목록.\n" +" -p 입력에 다시 활용할 수 있는 형식의 함수 이름과 바인딩 목록.\n" +" -S 매크로와 값을 실행하는 키 시퀀스 목록\n" +" -s 입력으로 다시 활용할 수 있는 매크로와 값을 실행하는\n" +" 키 시퀀스 목록.\n" +" -V 변수 이름과 값 목록\n" +" -v 입력으로 다시 활용할 수 있는 변수 이름과 값 목록.\n" +" -q <함수이름> 어떤 키가 명명 함수를 실행하는지 요청.\n" +" -u <함수이름> 명명 함수에 바인딩한 모든 키의 바인딩 해제.\n" +" -r <키시퀀스> <키시퀀스>의 바인딩 제거.\n" +" -f <파일이름> <파일이름>의 키 바인딩 읽기.\n" +" -x <키시퀀스>:<셸명령>\t<키시퀀스>를 입력하면 <셸명령>을\n" +" \t\t\t\t실행하게 합.\n" +" -X 입력으로 다시 활용할 수 있는 -x로 지정한 키 시퀀스\n" +" 및 관련 명령 목록\n" +" \n" +" 종료 상태:\n" +" 알 수 없는 옵션을 지정하지 않았거나 오류가 없으면 0을 반환합니다." + +#: builtins.c:330 +msgid "" +"Exit for, while, or until loops.\n" +" \n" +" Exit a FOR, WHILE or UNTIL loop. If N is specified, break N enclosing\n" +" loops.\n" +" \n" +" Exit Status:\n" +" The exit status is 0 unless N is not greater than or equal to 1." +msgstr "" +"for, while, until 반복문을 나갑니다.\n" +" \n" +" FOR, WHILE, UNTIL 반복문을 나갑니다. <횟수>를 지정하면,\n" +" 반복 <횟수>에 도달했을 때 중단합니다.\n" +" \n" +" 종료 상태:\n" +" <횟수>가 1보다 크거나 같으면 0입니다." + +#: builtins.c:342 +msgid "" +"Resume for, while, or until loops.\n" +" \n" +" Resumes the next iteration of the enclosing FOR, WHILE or UNTIL loop.\n" +" If N is specified, resumes the Nth enclosing loop.\n" +" \n" +" Exit Status:\n" +" The exit status is 0 unless N is not greater than or equal to 1." +msgstr "" +"for, while, until 반복문을 다시 실행합니다.\n" +" \n" +" FOR, WHILE, UNTIL 반복문의 다음 반복 실행을 진행합니다.\n" +" <횟수>를 지정하면 <횟수> 만큼 다시 실행합니다.\n" +" \n" +" 종료 상태:\n" +" <횟수>가 1보다 크거나 같으면 0입니다." + +#: builtins.c:354 +msgid "" +"Execute shell builtins.\n" +" \n" +" Execute SHELL-BUILTIN with arguments ARGs without performing command\n" +" lookup. This is useful when you wish to reimplement a shell builtin\n" +" as a shell function, but need to execute the builtin within the function.\n" +" \n" +" Exit Status:\n" +" Returns the exit status of SHELL-BUILTIN, or false if SHELL-BUILTIN is\n" +" not a shell builtin." +msgstr "" +"셸 내장 명령을 실행합니다.\n" +" \n" +" <셸내장명령>을 명령 검색 동작 없이 <인자>를 지정하여 실행합니다.\n" +" 셸 내장 명령을 셸 함수로 재구현할 때 쓸만합니다만, 내장 명령은\n" +" 함수 안에서 실행해야합니다.\n" +" \n" +" 종료 상태:\n" +" <셸내장명령>의 종료 상태를 반환하거나 <셸내장명령>이 내장\n" +" 명령이 아닐 경우 거짓을 반환합니다." + +#: builtins.c:369 +msgid "" +"Return the context of the current subroutine call.\n" +" \n" +" Without EXPR, returns \"$line $filename\". With EXPR, returns\n" +" \"$line $subroutine $filename\"; this extra information can be used to\n" +" provide a stack trace.\n" +" \n" +" The value of EXPR indicates how many call frames to go back before the\n" +" current one; the top frame is frame 0.\n" +" \n" +" Exit Status:\n" +" Returns 0 unless the shell is not executing a shell function or EXPR\n" +" is invalid." +msgstr "" +"현재 하위루틴 호출 컨텍스트를 반환합니다.\n" +" \n" +" <표현식>이 없다면 \"$line $filename\"을 반환하며, <표현식>을 지정했다면\n" +" \"$line $subroutine $filename\"을 반환합니다. 추가 정보는 스택 트레이스\n" +" 에 활용할 수 있습니다.\n" +" \n" +" <표현식>의 값은 현재 호출 프레임으로부터 얼마나 되돌아가야 하는지를\n" +" 나타냅니다. 최상단 프레임은 프레임 0번입니다." + +#: builtins.c:387 +msgid "" +"Change the shell working directory.\n" +" \n" +" Change the current directory to DIR. The default DIR is the value of the\n" +" HOME shell variable.\n" +" \n" +" The variable CDPATH defines the search path for the directory containing\n" +" DIR. Alternative directory names in CDPATH are separated by a colon (:).\n" +" A null directory name is the same as the current directory. If DIR begins\n" +" with a slash (/), then CDPATH is not used.\n" +" \n" +" If the directory is not found, and the shell option `cdable_vars' is set,\n" +" the word is assumed to be a variable name. If that variable has a value,\n" +" its value is used for DIR.\n" +" \n" +" Options:\n" +" -L\tforce symbolic links to be followed: resolve symbolic\n" +" \t\tlinks in DIR after processing instances of `..'\n" +" -P\tuse the physical directory structure without following\n" +" \t\tsymbolic links: resolve symbolic links in DIR before\n" +" \t\tprocessing instances of `..'\n" +" -e\tif the -P option is supplied, and the current working\n" +" \t\tdirectory cannot be determined successfully, exit with\n" +" \t\ta non-zero status\n" +" -@\ton systems that support it, present a file with extended\n" +" \t\tattributes as a directory containing the file attributes\n" +" \n" +" The default is to follow symbolic links, as if `-L' were specified.\n" +" `..' is processed by removing the immediately previous pathname component\n" +" back to a slash or the beginning of DIR.\n" +" \n" +" Exit Status:\n" +" Returns 0 if the directory is changed, and if $PWD is set successfully when\n" +" -P is used; non-zero otherwise." +msgstr "" +"셸 작업 디렉터리를 바꿉니다.\n" +" \n" +" 현재 디렉터리를 <디렉터리>로 바꿉니다. 기본 <디렉터리>는 HOME 셸 변수\n" +" 값입니다.\n" +" \n" +" CDPATH 변수에는 <디렉터리> 값이 들어간 디렉터리 검색 경로를 지정합니다.\n" +" CDPATH의 대안 디렉터리 이름은 콜론으로 구분합니다. 널 디렉터리 이름은 \n" +" 현재 디렉터리와 같습니다. <디렉터리> 값이 슬래시 문자(/)로 시작하면, \n" +" CDPATH 변수를 사용하지 않습니다.\n" +" \n" +" 디렉터리가 없고, `cdable_vars' 셸 옵션을 설정했다면, 단어를 변수 이름으로\n" +" 가정합니다. 변수에 값이 들어가있다면, 해당 값을 <디렉터리> 값으로 활용\n" +" 합니다.\n" +" \n" +" 옵션:\n" +" -L\t강제로 심볼릭 링크를 따라갑니다. <디렉터리>의 심볼릭 링크를\n" +" \t\t`..' 인스턴스를 처리한 다음에 해석합니다.\n" +" -P\t심볼릭 링크를 따르지 않고 실제 디렉터리 구조를 활용합니다.\n" +" \t\t`..' 인스턴스를 처리하기 전에 <디렉터리>의 심볼릭 링크를\n" +" \t\t해석합니다.\n" +" -e\t-P 옵션을 지정하고, 현재 디렉터리를 제대로 식별하지 못하면\n" +" \t\t0이 아닌 상태 값으로 나갑니다\n" +" -@\t이 옵션을 지원하는 시스템에서는 파일 속성이 들어간\n" +" \t\t디렉터리처럼 확장 속성을 가진 파일을 나타냅니다\n" +" \n" +" `-L' 옵션을 지정했을 때와 같이 심볼릭 링크를 따라가는게 기본 동작입니다.\n" +" `..'은 이전 경로 이름 요소를 즉시 제거하여 슬래시 경로로 돌아가거나\n" +" <디렉터리>의 시작점으로 돌아갑니댜.\n" +" \n" +" 종료 상태:\n" +" 디렉터리가 바뀌었고 -P 옵션을 사용했을 때 $PWD 값을 제대로 설정하면\n" +" 0 값을 반환하며, 그렇지 않으면 0이 아닌 값을 반환합니다." + +#: builtins.c:425 +msgid "" +"Print the name of the current working directory.\n" +" \n" +" Options:\n" +" -L\tprint the value of $PWD if it names the current working\n" +" \t\tdirectory\n" +" -P\tprint the physical directory, without any symbolic links\n" +" \n" +" By default, `pwd' behaves as if `-L' were specified.\n" +" \n" +" Exit Status:\n" +" Returns 0 unless an invalid option is given or the current directory\n" +" cannot be read." +msgstr "" +"현재 작업 디렉터리의 이름을 출력합니다.\n" +" \n" +" 옵션:\n" +" -L\t$PWD값의 이름이 현재 작업 디렉터리일 경우 값을 출력\n" +" -P\t심볼릭 링크가 아닌 물리 디렉터리를 출력\n" +" \n" +" 기본적으로 `pwd'에는 `-L' 옵션이 붙어있습니다.\n" +" \n" +" 종료 상태:\n" +" 적절한 옵션이 붙었거나 현재 디렉터리를 읽을 수 있다면 0을 반환합니다." + +#: builtins.c:442 +msgid "" +"Null command.\n" +" \n" +" No effect; the command does nothing.\n" +" \n" +" Exit Status:\n" +" Always succeeds." +msgstr "" +"Null 명령.\n" +" \n" +" 효과 없음. 아무것도 하지 않습니다.\n" +" \n" +" 종료 상태:\n" +" 항상 성공합니다." + +#: builtins.c:453 +msgid "" +"Return a successful result.\n" +" \n" +" Exit Status:\n" +" Always succeeds." +msgstr "" +"성공 결과를 반환합니다.\n" +" \n" +" 종료 상태:\n" +" 항상 성공합니다." + +#: builtins.c:462 +msgid "" +"Return an unsuccessful result.\n" +" \n" +" Exit Status:\n" +" Always fails." +msgstr "" +"실패 결과를 반환합니다.\n" +" \n" +" 종료 상태:\n" +" 항상 실패합니다." + +#: builtins.c:471 +msgid "" +"Execute a simple command or display information about commands.\n" +" \n" +" Runs COMMAND with ARGS suppressing shell function lookup, or display\n" +" information about the specified COMMANDs. Can be used to invoke commands\n" +" on disk when a function with the same name exists.\n" +" \n" +" Options:\n" +" -p use a default value for PATH that is guaranteed to find all of\n" +" the standard utilities\n" +" -v print a description of COMMAND similar to the `type' builtin\n" +" -V print a more verbose description of each COMMAND\n" +" \n" +" Exit Status:\n" +" Returns exit status of COMMAND, or failure if COMMAND is not found." +msgstr "" +"간단한 명령을 실행하거나 명령 정보를 표시합니다.\n" +" \n" +" 셸 함수 탐색을 억제하는 <인자>로 <명령>을 실행하거나, 지정 <명령>의 정보를\n" +" 나타냅니다. 동일한 이름을 가진 함수가 있을 때 디스크의 명령을 실행할 경우\n" +" 활용할 수 있습니다.\n" +" \n" +" 옵션:\n" +" -p 표준 유틸리티를 전부 찾을 수 있다고 보장하는\n" +" PATH 기본값을 사용합니다.\n" +" -v `type' 내장 명령과 비슷하게 <명령>의 설명을 보여줍니다\n" +" -V 각 <명령>의 더 자세한 정보를 보여줍니다\n" +" \n" +" 종료 상태:\n" +" <명령>의 실행 결과를 반환하거나 <명령>이 없을 경우 오류를 반환합니다." + +#: builtins.c:490 +msgid "" +"Set variable values and attributes.\n" +" \n" +" Declare variables and give them attributes. If no NAMEs are given,\n" +" display the attributes and values of all variables.\n" +" \n" +" Options:\n" +" -f\trestrict action or display to function names and definitions\n" +" -F\trestrict display to function names only (plus line number and\n" +" \t\tsource file when debugging)\n" +" -g\tcreate global variables when used in a shell function; otherwise\n" +" \t\tignored\n" +" -I\tif creating a local variable, inherit the attributes and value\n" +" \t\tof a variable with the same name at a previous scope\n" +" -p\tdisplay the attributes and value of each NAME\n" +" \n" +" Options which set attributes:\n" +" -a\tto make NAMEs indexed arrays (if supported)\n" +" -A\tto make NAMEs associative arrays (if supported)\n" +" -i\tto make NAMEs have the `integer' attribute\n" +" -l\tto convert the value of each NAME to lower case on assignment\n" +" -n\tmake NAME a reference to the variable named by its value\n" +" -r\tto make NAMEs readonly\n" +" -t\tto make NAMEs have the `trace' attribute\n" +" -u\tto convert the value of each NAME to upper case on assignment\n" +" -x\tto make NAMEs export\n" +" \n" +" Using `+' instead of `-' turns off the given attribute.\n" +" \n" +" Variables with the integer attribute have arithmetic evaluation (see\n" +" the `let' command) performed when the variable is assigned a value.\n" +" \n" +" When used in a function, `declare' makes NAMEs local, as with the `local'\n" +" command. The `-g' option suppresses this behavior.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid option is supplied or a variable\n" +" assignment error occurs." +msgstr "" +"변수 값과 속성을 설정합니다.\n" +" \n" +" 변수를 선언하고 속성을 부여합니다. <이름>을 정하지 않으면,\n" +" 속성과 모든 변수 값을 나타냅니다.\n" +" \n" +" 옵션:\n" +" -f\t함수 이름과 정의로 동작과 표시를 제한합니다\n" +" -F\t함수 이름만 표시를 제한합니다 (디버깅할 때는 행 번호와\n" +" \t\t소스 파일 포함)\n" +" -g\t셸 함수에서 사용할 때 전역 변수를 만듭니다. 아니면 무시\n" +" -I\t지역 변수를 만들 때, 이전 범위의 같은 이름을 가진 속성과\n" +" \t\t변수값을 이어받습니다\n" +" -p\t속성과 각 <이름>의 값을 표시합니다\n" +" \n" +" 속성을 설정하는 옵션:\n" +" -a\t<이름>을 색인 배열로 만듬 (지원할 경우)\n" +" -A\t<이름>을 연관 배열로 만듬 (지원할 경우)\n" +" -i\t<이름>을 `정수' 속성을 가지게 함\n" +" -l\t각 <이름>의 할당 값을 소문자로 변환\n" +" -n\t<이름> 값으로 지정한 이름을 참조하게 함\n" +" -r\t<이름>을 읽기 전용으로 설정\n" +" -t\t<이름>에 `trace' 속성을 가지게 함\n" +" -u\t각 <이름>의 할당 값을 대문자로 변환\n" +" -x\t<이름>을 내보냄\n" +" \n" +" 주어진 속성을 사용하려면 `+'를 끄려면 `-'를 사용합니다.\n" +" \n" +" 정수 속성 변수는 변수에 값을 할당하면 산술 연산을 수행\n" +" 합니다 (`let' 명령 참고).\n" +" \n" +" 함수에서 사용할 때, `declare' 명령은 `local' 명령처럼\n" +" <이름>을 로컬 변수로 만듭니다. `-g' 옵션은 이 동작을\n" +" 억제합니다.\n" +" \n" +" 종료 상태:\n" +" 적절한 옵션을 설정했거나 변수 할당 오류가 없다면\n" +" 성공을 반환합니다." + +#: builtins.c:532 +msgid "" +"Set variable values and attributes.\n" +" \n" +" A synonym for `declare'. See `help declare'." +msgstr "" +"변수의 값과 속성을 설정합니다.\n" +" \n" +" `declare'의 동의어 입니다. `help declare'를 보십시오." + +#: builtins.c:540 +msgid "" +"Define local variables.\n" +" \n" +" Create a local variable called NAME, and give it VALUE. OPTION can\n" +" be any option accepted by `declare'.\n" +" \n" +" Local variables can only be used within a function; they are visible\n" +" only to the function where they are defined and its children.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid option is supplied, a variable\n" +" assignment error occurs, or the shell is not executing a function." +msgstr "" +"지역 변수를 지정합니다.\n" +" \n" +" <이름> 지역 변수를 만들고 <값>을 부여합니다. <옵션>은 `declare'\n" +" 로 받아들일 수 있는 어떤 옵션도 가능합니다.\n" +" \n" +" 지역 변수는 함수 내에서만 활용할 수 있습니다. 하위 요소에서 지정했다면,\n" +" 역시 하위 함수에서만 볼 수 있습니다.\n" +" \n" +" 종료 상태:\n" +" 적절한 옵션을 지정했거나, 변수 할당에 오류가 없거나,\n" +" 셸에서 함수를 실행하면 성공을 반환합니다." + +#: builtins.c:557 +msgid "" +"Write arguments to the standard output.\n" +" \n" +" Display the ARGs, separated by a single space character and followed by a\n" +" newline, on the standard output.\n" +" \n" +" Options:\n" +" -n\tdo not append a newline\n" +" -e\tenable interpretation of the following backslash escapes\n" +" -E\texplicitly suppress interpretation of backslash escapes\n" +" \n" +" `echo' interprets the following backslash-escaped characters:\n" +" \\a\talert (bell)\n" +" \\b\tbackspace\n" +" \\c\tsuppress further output\n" +" \\e\tescape character\n" +" \\E\tescape character\n" +" \\f\tform feed\n" +" \\n\tnew line\n" +" \\r\tcarriage return\n" +" \\t\thorizontal tab\n" +" \\v\tvertical tab\n" +" \\\\\tbackslash\n" +" \\0nnn\tthe character whose ASCII code is NNN (octal). NNN can be\n" +" \t\t0 to 3 octal digits\n" +" \\xHH\tthe eight-bit character whose value is HH (hexadecimal). HH\n" +" \t\tcan be one or two hex digits\n" +" \\uHHHH\tthe Unicode character whose value is the hexadecimal value HHHH.\n" +" \t\tHHHH can be one to four hex digits.\n" +" \\UHHHHHHHH the Unicode character whose value is the hexadecimal value\n" +" \t\tHHHHHHHH. HHHHHHHH can be one to eight hex digits.\n" +" \n" +" Exit Status:\n" +" Returns success unless a write error occurs." +msgstr "" +"표준 출력에 인자를 기록합니다.\n" +" \n" +" 단일 공백문자로 구분하며 개행 문자가 따라오는 <인자>를\n" +" 표준 출력에 나타냅니다.\n" +" \n" +" 옵션:\n" +" -n\t개행 문자 추가 안함\n" +" -e\t추가 백슬래시 탈출 문자 처리 활성\n" +" -E\t백슬래시 탈출 문자 처리를 명백하게 무시\n" +" \n" +" `echo' 명령은 다음 백슬래시 탈출 문자를 처리합니다:\n" +" \a\t경고 (알림음)\n" +" \\b\t백스페이스\n" +" \\c\t이후 출력 무시\n" +" \\e\t탈출 문자\n" +" \\E\t탈출 문자\n" +" \\f\t폼 피드\n" +" \\n\t개행 문자\n" +" \\r\t캐리지 리턴\n" +" \\t\t수평 탭\n" +" \\v\t수직탭\n" +" \\\\\t백슬래시\n" +" \\0nnn\t8진수 ASCII 코드 문자. NNN은 최대 3자리 8진수\n" +" \\xHH\t16진수 8비트 문자. HH는 2자리 16진수\n" +" \\uHHHH\t16진수 유니코드 문자. HHHH는 4자리 16진수\n" +" \\UHHHHHHHH 16진수 유니코드 문자. HHHHHHHH는 8자리 16진수\n" +" \n" +" 종료 상태:\n" +" 기록 오류가 없으면 성공을 반환합니다." + +#: builtins.c:597 +msgid "" +"Write arguments to the standard output.\n" +" \n" +" Display the ARGs on the standard output followed by a newline.\n" +" \n" +" Options:\n" +" -n\tdo not append a newline\n" +" \n" +" Exit Status:\n" +" Returns success unless a write error occurs." +msgstr "" +"표준 출력에 인자를 기록합니다.\n" +" \n" +" <인자> 값과 줄바꿈을 표준 출력에 나타냅니다.\n" +" \n" +" 옵션:\n" +" -n\t개행 문자 추가 안함\n" +" \n" +" 종료 상태:\n" +" 기록 오류가 없다면 성공을 반환합니다." + +#: builtins.c:612 +msgid "" +"Enable and disable shell builtins.\n" +" \n" +" Enables and disables builtin shell commands. Disabling allows you to\n" +" execute a disk command which has the same name as a shell builtin\n" +" without using a full pathname.\n" +" \n" +" Options:\n" +" -a\tprint a list of builtins showing whether or not each is enabled\n" +" -n\tdisable each NAME or display a list of disabled builtins\n" +" -p\tprint the list of builtins in a reusable format\n" +" -s\tprint only the names of Posix `special' builtins\n" +" \n" +" Options controlling dynamic loading:\n" +" -f\tLoad builtin NAME from shared object FILENAME\n" +" -d\tRemove a builtin loaded with -f\n" +" \n" +" Without options, each NAME is enabled.\n" +" \n" +" To use the `test' found in $PATH instead of the shell builtin\n" +" version, type `enable -n test'.\n" +" \n" +" Exit Status:\n" +" Returns success unless NAME is not a shell builtin or an error occurs." +msgstr "" +"셸 내장 명령을 사용 혹은 미사용처리 합니다.\n" +" \n" +" 내장 셸 명령을 사용/미사용 처리합니다. 미사용 처리하면 전체 경로 이름을\n" +" 지정하지 않고도 셸 내장명령처럼 동일한 이름을 가진 디스크 명령을 실행할\n" +" 수 있습니다\n" +" \n" +" 옵션:\n" +" -a\t내장 명령의 활성 여부를 나타내는 목록을 출력합니다\n" +" -n\t각 <이름>을 미사용 처리하거나 미사용 내장 명령 목록을 출력합니다\n" +" -p\t재활용 형식으로 내장 명령 목록을 출력합니다\n" +" -s\tPOSIX `특수' 내장 명령 이름만 출력합니다\n" +" \n" +" 동적 불러오기를 제어하는 옵션은 다음과 같습니다:\n" +" -f\t<파일이름> 공유 객체의 내장 <이름>을 불러옵니다\n" +" -d\t-f로 불러온 내장 명령을 제거합니다\n" +" \n" +" 옵션을 지정하지 않으면, 각 <이름>을 사용합니다.\n" +" \n" +" 셸 내장 버전 대신 $PATH에서 찾은 `test'를 활용하려면,\n" +" `enable -n test'를 입력하십시오.\n" +" \n" +" 종료 상태:\n" +" <이름>이 셸 내장 명령이고 오류가 없으면 성공을 반환합니다." + +#: builtins.c:640 +msgid "" +"Execute arguments as a shell command.\n" +" \n" +" Combine ARGs into a single string, use the result as input to the shell,\n" +" and execute the resulting commands.\n" +" \n" +" Exit Status:\n" +" Returns exit status of command or success if command is null." +msgstr "" +"인자를 셸 명령으로 실행합니다.\n" +" \n" +" <인자>를 단일 문자열에 결합하여 셸 입력 결과로 할용한 다음,\n" +" 결과를 내는 명령으로 실행합니다.\n" +" \n" +" 종료 상태:\n" +" 명령 값이 있다면 종료 상태를, null 이라면 성공을 반환합니다." + +#: builtins.c:652 +msgid "" +"Parse option arguments.\n" +" \n" +" Getopts is used by shell procedures to parse positional parameters\n" +" as options.\n" +" \n" +" OPTSTRING contains the option letters to be recognized; if a letter\n" +" is followed by a colon, the option is expected to have an argument,\n" +" which should be separated from it by white space.\n" +" \n" +" Each time it is invoked, getopts will place the next option in the\n" +" shell variable $name, initializing name if it does not exist, and\n" +" the index of the next argument to be processed into the shell\n" +" variable OPTIND. OPTIND is initialized to 1 each time the shell or\n" +" a shell script is invoked. When an option requires an argument,\n" +" getopts places that argument into the shell variable OPTARG.\n" +" \n" +" getopts reports errors in one of two ways. If the first character\n" +" of OPTSTRING is a colon, getopts uses silent error reporting. In\n" +" this mode, no error messages are printed. If an invalid option is\n" +" seen, getopts places the option character found into OPTARG. If a\n" +" required argument is not found, getopts places a ':' into NAME and\n" +" sets OPTARG to the option character found. If getopts is not in\n" +" silent mode, and an invalid option is seen, getopts places '?' into\n" +" NAME and unsets OPTARG. If a required argument is not found, a '?'\n" +" is placed in NAME, OPTARG is unset, and a diagnostic message is\n" +" printed.\n" +" \n" +" If the shell variable OPTERR has the value 0, getopts disables the\n" +" printing of error messages, even if the first character of\n" +" OPTSTRING is not a colon. OPTERR has the value 1 by default.\n" +" \n" +" Getopts normally parses the positional parameters, but if arguments\n" +" are supplied as ARG values, they are parsed instead.\n" +" \n" +" Exit Status:\n" +" Returns success if an option is found; fails if the end of options is\n" +" encountered or an error occurs." +msgstr "" +"옵션 인자를 해석합니다.\n" +" \n" +" getopts는 위치 매개변수를 옵션으로 해석하는 셸 프로시저에서\n" +" 활용합니다.\n" +" \n" +" <옵션문자열>에는 식별할 옵션 문자가 들어갑니다. 문자에 콜론이\n" +" 뒤따라 붙을 경우, 옵션에 공백 문자로 구분한 인자가 뒤따라오는\n" +" 것으로 간주합니다.\n" +" \n" +" 실행할 때마다, getopts에서 $name 셸 변수의 다음 옵션을 확인하여\n" +" 해당 옵션이 없을 경우 이름을 초기화하고 OPTIND 셸 변수에 다음\n" +" 인자의 색인을 처리합니다. OPTIND는 셸 또는 셸 스크립트를 실행\n" +" 할 때마다 1로 초기화합니다. 옵션에 인자가 필요하면, getopts에서\n" +" 해당 인자를 OPTARG 셸 변수에 넣습니다.\n" +" \n" +" getopts는 두가지 방법으로 오류를 나타냅니다. OPTSTRING의 첫번째\n" +" 문자가 콜론이면, getopts에서는 오류 보고시 조용한 상태로 바뀝니다.\n" +" 이 때, 어떤 오류 메시지도 나타나지 않습니다. 그런데 부적절한 옵션이\n" +" 나타나면, getopts에서 OPTARG의 잘못된 옵션 문자를 찾아 가리킵니다.\n" +" 필요한 인자가 없다면, getopts는 콜론을 <이름>에 대입하고, OPTARG \n" +" 변수에는 찾은 옵션 문자를 할당합니다. getopts가 미출력 상태가 아니고,\n" +" 부적절한 옵션을 확인했다면, getopts는 '?' 값을 <이름>에 대입하고, \n" +" OPTARG 설정을 해제합니다. 필요한 인자가 없다면 '?' 값이 <이름>에\n" +" 들어가고, OPTARG 변수 설정을 해제하며, 진단 메시지를 출력합니다.\n" +" \n" +" OPTERR 셸 변수값이 0이면, getopts에서는 오류 메시지 출력을 하지\n" +" 않습니다. OPTSTRING 첫번째 문자가 콜론이 아니더라도, 기본적으로\n" +" OPTERR 셸 변수값에는 1이 들어가 있습니다.\n" +" \n" +" getopts는 보통 위치 매개변수를 해석하지만, <인자> 값처럼 인자를\n" +" 지정하면, 해당 값을 먼저 해석합니다.\n" +" \n" +" 종료 상태:\n" +" 옵션을 찾으면 성공을 반환합니다.옵션의 끝에 도달했거나, 오류가\n" +" 나타나면 실패를 반환합니다." + +#: builtins.c:694 +msgid "" +"Replace the shell with the given command.\n" +" \n" +" Execute COMMAND, replacing this shell with the specified program.\n" +" ARGUMENTS become the arguments to COMMAND. If COMMAND is not specified,\n" +" any redirections take effect in the current shell.\n" +" \n" +" Options:\n" +" -a name\tpass NAME as the zeroth argument to COMMAND\n" +" -c\texecute COMMAND with an empty environment\n" +" -l\tplace a dash in the zeroth argument to COMMAND\n" +" \n" +" If the command cannot be executed, a non-interactive shell exits, unless\n" +" the shell option `execfail' is set.\n" +" \n" +" Exit Status:\n" +" Returns success unless COMMAND is not found or a redirection error occurs." +msgstr "" +"셸을 주어진 명령으로 대체합니다.\n" +" \n" +" 이 셸을 지정 프로그램으로 대체하는 <명령>을 실행합니다.\n" +" <인자>는 <명령>을 따라갑니다. <명령>을 지정하지 않으면,\n" +" 현재 셸의 어떤 방향재지정 명령이든 결과가 나타납니다.\n" +" \n" +" 옵션:\n" +" -a <이름>\t<이름>을 <명령>의 0번째 인자로 전달합니다\n" +" -c\t빈 환경에서 <명령>을 실행합니다\n" +" -l\t<명령>의 0번째 인자로 대시 문자를 둡니다\n" +" \n" +" 명령을 실행할 수 없다면, `execfail' 셸 옵션을 설정하지 않았을 경우,\n" +" 비대화식 셸을 나갑니다.\n" +" \n" +" 종료 상태:\n" +" <명령>이 있거나 방향재지정 실행시 오류가 없다면 성공을 반환합니다." + +#: builtins.c:715 +msgid "" +"Exit the shell.\n" +" \n" +" Exits the shell with a status of N. If N is omitted, the exit status\n" +" is that of the last command executed." +msgstr "" +"셸을 나갑니다.\n" +" \n" +" <번호> 값 상태로 셸을 나갑니다. <번호>를 지정하지 않으면,\n" +" 종료 상태는 최종 명령 실행 상태와 동일합니다." + +#: builtins.c:724 +msgid "" +"Exit a login shell.\n" +" \n" +" Exits a login shell with exit status N. Returns an error if not executed\n" +" in a login shell." +msgstr "" +"로그인 셸을 나갑니다.\n" +" \n" +" 종료 상태 N으로 로그인 셸을 나갑니다. 로그인 셸에서 실행되지 않는 경우\n" +" 에러가 발생합니다." + +#: builtins.c:734 +msgid "" +"Display or execute commands from the history list.\n" +" \n" +" fc is used to list or edit and re-execute commands from the history list.\n" +" FIRST and LAST can be numbers specifying the range, or FIRST can be a\n" +" string, which means the most recent command beginning with that\n" +" string.\n" +" \n" +" Options:\n" +" -e ENAME\tselect which editor to use. Default is FCEDIT, then EDITOR,\n" +" \t\tthen vi\n" +" -l \tlist lines instead of editing\n" +" -n\tomit line numbers when listing\n" +" -r\treverse the order of the lines (newest listed first)\n" +" \n" +" With the `fc -s [pat=rep ...] [command]' format, COMMAND is\n" +" re-executed after the substitution OLD=NEW is performed.\n" +" \n" +" A useful alias to use with this is r='fc -s', so that typing `r cc'\n" +" runs the last command beginning with `cc' and typing `r' re-executes\n" +" the last command.\n" +" \n" +" Exit Status:\n" +" Returns success or status of executed command; non-zero if an error occurs." +msgstr "" +"기록 목록의 명령을 표시하거나 실행합니다.\n" +" \n" +" fc는 기록 목록의 명령을 보여주거나 편집하고 다시 실행할 때 사용합니다.\n" +" <처음>과 <종결>은 범위 지정 숫자이며, <처음>은 문자열일 수도 있습니다.\n" +" 이는, 최근 명령이 <처음>에 지정한 문자열로 시작함을 의미합니다.\n" +" \n" +" 옵션:\n" +" -e <편집기이름>\t사용할 편집기를 선택합니다. 기본은 FCEDIT, EDITOR, \n" +" \t\t그 다음은 vi입니다\n" +" -l \t편집하지 않고 목록 행을 보여줍니다\n" +" -n\t목록을 나타낼 때 번호를 생략합니다\n" +" -r\t행 순서를 뒤집습니다 (최신 항목을 먼저)\n" +" \n" +" `fc -s [<패턴>=<대체> ...] [<명령>]' 형식에서, <명령> 은\n" +" <이전>=<최신> 대체 동작을 수행한 다음 다시 실행합니다.\n" +" \n" +" r='fc -s'(으)로 쓸만한 별칭을 만들어 쓸 수 있는데, `r cc'를 입력하면\n" +" `cc'로 시작하는 최근 명령을 실행하고 `r'을 입력하면 직전에 입력한\n" +" 최근 명령을 다시 실행할 수 있습니다.\n" +" \n" +" 종료 상태:\n" +" 성공 또는 실행 명령 상태를 반환합니다. 오류가 있다면 0이 아닌 값을 반환합니다." + +#: builtins.c:764 +msgid "" +"Move job to the foreground.\n" +" \n" +" Place the job identified by JOB_SPEC in the foreground, making it the\n" +" current job. If JOB_SPEC is not present, the shell's notion of the\n" +" current job is used.\n" +" \n" +" Exit Status:\n" +" Status of command placed in foreground, or failure if an error occurs." +msgstr "" +"작업을 포그라운드로 이동합니다.\n" +" \n" +" JOB_SPEC으로 식별하는 작업을 포그라운드에 두어, 현재 작업으로\n" +" 전환합니다. JOB_SPEC이 현재 작업이 아니면, 셸의 개념상 현재 작업을\n" +" 활용합니다.\n" +" \n" +" 종료 상태:\n" +" 포그라운드에 있는 명령의 상태를 반환합니다. 오류가 있다면 실패를 반환합니다." + +#: builtins.c:779 +msgid "" +"Move jobs to the background.\n" +" \n" +" Place the jobs identified by each JOB_SPEC in the background, as if they\n" +" had been started with `&'. If JOB_SPEC is not present, the shell's notion\n" +" of the current job is used.\n" +" \n" +" Exit Status:\n" +" Returns success unless job control is not enabled or an error occurs." +msgstr "" +"작업을 백그라운드로 이동합니다.\n" +" \n" +" `&'로 시작했을 때와 마찬가지로, 각 JOB_SPEC으로 식별하는 작업을\n" +" 백그라운드에 둡니다. JOB_SPEC이 없다면, 셸의 개념상 현재 작업을\n" +" 활용합니다.\n" +" \n" +" 종료 상태:\n" +" 작업 컨트롤이 있고 오류가 없다면 성공을 반환합니다." + +#: builtins.c:793 +msgid "" +"Remember or display program locations.\n" +" \n" +" Determine and remember the full pathname of each command NAME. If\n" +" no arguments are given, information about remembered commands is displayed.\n" +" \n" +" Options:\n" +" -d\tforget the remembered location of each NAME\n" +" -l\tdisplay in a format that may be reused as input\n" +" -p pathname\tuse PATHNAME as the full pathname of NAME\n" +" -r\tforget all remembered locations\n" +" -t\tprint the remembered location of each NAME, preceding\n" +" \t\teach location with the corresponding NAME if multiple\n" +" \t\tNAMEs are given\n" +" Arguments:\n" +" NAME\tEach NAME is searched for in $PATH and added to the list\n" +" \t\tof remembered commands.\n" +" \n" +" Exit Status:\n" +" Returns success unless NAME is not found or an invalid option is given." +msgstr "" +"프로그램 위치를 기억하거나 표시합니다.\n" +" \n" +" 명령 <이름>의 전체 경로 이름을 판단하거나 기억합니다. 어떤 인자도\n" +" 설정하지 않으면, 기억한 명령의 정보를 표시합니다.\n" +" \n" +" 옵션:\n" +" -d\t각 <이름>의 기억 위치를 소거합니다\n" +" -l\t입력으로 재활용할 형식을 표시합니다\n" +" -p <경로이름>\t<이름> 의 전체 경로 이름으로 <경로이름>을 활용합니다\n" +" -r\t기억한 모든 위치를 소거합니다\n" +" -t\t각 <이름>의 기억 위치를 출력하며 여러 <이름>을 지정했을 경우,\n" +" \t\t<이름>에 해당하는 각 위치를 우선 나타냅니다\n" +" 인자:\n" +" <이름>\t각 <이름>은 $PATH에서 검색하며 기억 명령에 대해 목록에\n" +" \t\t추가합니다.\n" +" \n" +" 종료 상태:\n" +" <이름>을 찾았거나 적절한 옵션을 지정했다면 성공을 반환합니다." + +#: builtins.c:818 +msgid "" +"Display information about builtin commands.\n" +" \n" +" Displays brief summaries of builtin commands. If PATTERN is\n" +" specified, gives detailed help on all commands matching PATTERN,\n" +" otherwise the list of help topics is printed.\n" +" \n" +" Options:\n" +" -d\toutput short description for each topic\n" +" -m\tdisplay usage in pseudo-manpage format\n" +" -s\toutput only a short usage synopsis for each topic matching\n" +" \t\tPATTERN\n" +" \n" +" Arguments:\n" +" PATTERN\tPattern specifying a help topic\n" +" \n" +" Exit Status:\n" +" Returns success unless PATTERN is not found or an invalid option is given." +msgstr "" +"내장 명령 정보를 표시합니다.\n" +" \n" +" 내장 명령 요약 정보를 표시합니다. <패턴>을 지정하면 <패턴>에 일치\n" +" 하는 모든 명령의 자세한 내용을 나타내며, 그렇지 않으면 도움말 주제 \n" +" 목록을 나타냅니다.\n" +" \n" +" 옵션:\n" +" -d\t각 주제의 간단한 설명을 출력합니다\n" +" -m\t유사 맨 페이지 형식으로 사용법을 출력합니다.\n" +" -s\t<패턴>에 일치하는 주제의 간단한 개요만 출력합니다\n" +" \n" +" 인자:\n" +" <패턴>\t도움말 주제를 지정합니다\n" +" \n" +" 종료 상태:\n" +" <패턴>에 일치하는 주제를 찾았거나 적절한 옵션을 지정하면 성공을 반환합니다." + +#: builtins.c:842 +msgid "" +"Display or manipulate the history list.\n" +" \n" +" Display the history list with line numbers, prefixing each modified\n" +" entry with a `*'. An argument of N lists only the last N entries.\n" +" \n" +" Options:\n" +" -c\tclear the history list by deleting all of the entries\n" +" -d offset\tdelete the history entry at position OFFSET. Negative\n" +" \t\toffsets count back from the end of the history list\n" +" \n" +" -a\tappend history lines from this session to the history file\n" +" -n\tread all history lines not already read from the history file\n" +" \t\tand append them to the history list\n" +" -r\tread the history file and append the contents to the history\n" +" \t\tlist\n" +" -w\twrite the current history to the history file\n" +" \n" +" -p\tperform history expansion on each ARG and display the result\n" +" \t\twithout storing it in the history list\n" +" -s\tappend the ARGs to the history list as a single entry\n" +" \n" +" If FILENAME is given, it is used as the history file. Otherwise,\n" +" if HISTFILE has a value, that is used, else ~/.bash_history.\n" +" \n" +" If the HISTTIMEFORMAT variable is set and not null, its value is used\n" +" as a format string for strftime(3) to print the time stamp associated\n" +" with each displayed history entry. No time stamps are printed otherwise.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid option is given or an error occurs." +msgstr "" +"기록 목록을 표시하거나 편집합니다.\n" +" \n" +" 기록 목록에 행번호를 붙여 나타내며, 수정한 항목은 `*' 표시가\n" +" 앞에 붙습니다. 인자 N은 최근 항목 N개만 나타냄을 의미합니다.\n" +" \n" +" 옵션:\n" +" -c\t모든 항목을 삭제하여 기록 목록을 지웁니다\n" +" -d <오프셋>\t<오프셋> 포지션에 있는 항목을 삭제합니다. 음수\n" +" \t\t오프셋은 기록 목록 끝부터 거꾸로 셉니다\n" +" \n" +" -a\t이 세선의 기록 파일에 기록 행을 추가합니다\n" +" -n\t기록 파일에서 이미 읽은 부분은 읽지 않고 모든 기록 항목을\n" +" \t\t읽어 기록 목록에 추가합니다\n" +" -r\t기록 파일을 읽고 기록 목록에 내용을 추가합니다\n" +" -w\t현재 기록을 기록 파일에 기록합니다\n" +" \n" +" -p\t각 <인자>의 기록 확장을 수행한 후 기록 목록에 저장하지\n" +" \t\t않고 결과를 표시합니다\n" +" -s\t<인자>를 기록 목록에 단일 항목으로 추가합니다\n" +" \n" +" <파일이름>을 지정하면 기록 파일로 사용합니다. 아니면,\n" +" HISTFILE 변수에 값을 지정했다면 해당 값을 사용하고, \n" +" 아니면 ~/.bash_history를 활용합니다.\n" +" \n" +" HISTTIMEFORMAT 변수에 값을 설정하여 널 상태가 아니라면 해당 값을\n" +" 앞으로 표시할 각 기록 항목에 대한 타임스탬프를 출력할 때 strftime(3)의\n" +" 형식 문자열로 활용합니다. 그렇지 않으면 타임스탬프를 출력하지 않습니다.\n" +" \n" +" 종료 상태:\n" +" 적절한 옵션을 설정했거나 오류가 없다면 성공을 반환합니다." + +#: builtins.c:879 +msgid "" +"Display status of jobs.\n" +" \n" +" Lists the active jobs. JOBSPEC restricts output to that job.\n" +" Without options, the status of all active jobs is displayed.\n" +" \n" +" Options:\n" +" -l\tlists process IDs in addition to the normal information\n" +" -n\tlists only processes that have changed status since the last\n" +" \t\tnotification\n" +" -p\tlists process IDs only\n" +" -r\trestrict output to running jobs\n" +" -s\trestrict output to stopped jobs\n" +" \n" +" If -x is supplied, COMMAND is run after all job specifications that\n" +" appear in ARGS have been replaced with the process ID of that job's\n" +" process group leader.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid option is given or an error occurs.\n" +" If -x is used, returns the exit status of COMMAND." +msgstr "" +"작업 상태를 표시합니다.\n" +" \n" +" 활성 작업을 나타냅니다. JOBSPEC에는 해당 작업의 출력을\n" +" 제한합니다. 옵션을 지정하지 않으면 모든 활성 작업 상태를\n" +" 나타냅니다.\n" +" \n" +" 옵션:\n" +" -l\t일반 정보 및 프로세스 ID를 보여줍니다.\n" +" -n\t최근 알림 이후 상태가 바뀐 프로세스만 보여줍니다.\n" +" -p\t프로세스 ID만 보여줍니다\n" +" -r\t출력 대상을 실행 작업으로 제한합니다\n" +" -s\t출력 대상을 멈춘 작업으로 제한합니다\n" +" \n" +" -x 옵션을 지정하면 <인자>에 나타난 모든 작업 명세가 프로세스 그룹의\n" +" 리더 프로세스 ID로 바뀐 후 <명령> 을 실행합니다.\n" +" \n" +" 종료 상태:\n" +" 적절한 옵션을 설정했거나 오류가 없다면 성공을 반환합니다.\n" +" -x 옵션을 사용했다면 <명령>의 종료 상태를 반환합니다." + +#: builtins.c:906 +msgid "" +"Remove jobs from current shell.\n" +" \n" +" Removes each JOBSPEC argument from the table of active jobs. Without\n" +" any JOBSPECs, the shell uses its notion of the current job.\n" +" \n" +" Options:\n" +" -a\tremove all jobs if JOBSPEC is not supplied\n" +" -h\tmark each JOBSPEC so that SIGHUP is not sent to the job if the\n" +" \t\tshell receives a SIGHUP\n" +" -r\tremove only running jobs\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid option or JOBSPEC is given." +msgstr "" +"현재 셸에서 작업을 제거합니다.\n" +" \n" +" 각 인자를 활성 작업 테이블에서 제거합니다. 어떤 도\n" +" 지정하지 않으면, 현재 작업을 지정한 것으로 간주합니다.\n" +" \n" +" 옵션:\n" +" -a\t를 지정하지 않으면 모든 작업을 제거합니다\n" +" -h\t각 을 마킹해서 셸에서 SIGHUP 시그널을 받았다면\n" +" \t\t작업에 해당 시그널을 보내지 않게 합니다.\n" +" -r\t실행 작업만 제거합니다\n" +" \n" +" 종료 상태:\n" +" 적절한 옵션을 지정하고 주어진 값이 올바를 경우 성공을 반환합니다." + +#: builtins.c:925 +msgid "" +"Send a signal to a job.\n" +" \n" +" Send the processes identified by PID or JOBSPEC the signal named by\n" +" SIGSPEC or SIGNUM. If neither SIGSPEC nor SIGNUM is present, then\n" +" SIGTERM is assumed.\n" +" \n" +" Options:\n" +" -s sig\tSIG is a signal name\n" +" -n sig\tSIG is a signal number\n" +" -l\tlist the signal names; if arguments follow `-l' they are\n" +" \t\tassumed to be signal numbers for which names should be listed\n" +" -L\tsynonym for -l\n" +" \n" +" Kill is a shell builtin for two reasons: it allows job IDs to be used\n" +" instead of process IDs, and allows processes to be killed if the limit\n" +" on processes that you can create is reached.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid option is given or an error occurs." +msgstr "" +"작업에 시그널을 보냅니다..\n" +" \n" +" 또는 으로 식별하는 프로세스에 SIGSPEC 또는\n" +" SIGNUM으로 이름이 붙은 시그널을 보냅니다. SIGSPEC, SIGNUM \n" +" 돌 다 없을 경우, SIGTERM을 고려합니다.\n" +" \n" +" 옵션:\n" +" -s <시그널>\t<시그널>은 시그널 이름입니다\n" +" -n <시그널>\t<시그널>은 시그널 번호입니다\n" +" -l\t시그널 이름 목록을 나타냅니다. 인자에 `-l'을 붙이면 나타낼 이름에\n" +" \t\t대한 시그널 번호를 나타내라는 의미입니다\n" +" -L\t-l과 동일한 의미\n" +" \n" +" 두가지 이유로 kill은 셸 내장 명령입니다: 프로세스 ID 대신 작업 ID를\n" +" 허용하며, 만들 수 있는 프로세스 수의 한계에 도달했을 때 강제로 끝내야\n" +" 할 프로세스를 강제로 끝낼 수 있습니다.\n" +" \n" +" 종료 상태:\n" +" 적절한 옵션을 설정했거나 오류가 없다면 성공을 반환합니다." + +#: builtins.c:949 +msgid "" +"Evaluate arithmetic expressions.\n" +" \n" +" Evaluate each ARG as an arithmetic expression. Evaluation is done in\n" +" fixed-width integers with no check for overflow, though division by 0\n" +" is trapped and flagged as an error. The following list of operators is\n" +" grouped into levels of equal-precedence operators. The levels are listed\n" +" in order of decreasing precedence.\n" +" \n" +" \tid++, id--\tvariable post-increment, post-decrement\n" +" \t++id, --id\tvariable pre-increment, pre-decrement\n" +" \t-, +\t\tunary minus, plus\n" +" \t!, ~\t\tlogical and bitwise negation\n" +" \t**\t\texponentiation\n" +" \t*, /, %\t\tmultiplication, division, remainder\n" +" \t+, -\t\taddition, subtraction\n" +" \t<<, >>\t\tleft and right bitwise shifts\n" +" \t<=, >=, <, >\tcomparison\n" +" \t==, !=\t\tequality, inequality\n" +" \t&\t\tbitwise AND\n" +" \t^\t\tbitwise XOR\n" +" \t|\t\tbitwise OR\n" +" \t&&\t\tlogical AND\n" +" \t||\t\tlogical OR\n" +" \texpr ? expr : expr\n" +" \t\t\tconditional operator\n" +" \t=, *=, /=, %=,\n" +" \t+=, -=, <<=, >>=,\n" +" \t&=, ^=, |=\tassignment\n" +" \n" +" Shell variables are allowed as operands. The name of the variable\n" +" is replaced by its value (coerced to a fixed-width integer) within\n" +" an expression. The variable need not have its integer attribute\n" +" turned on to be used in an expression.\n" +" \n" +" Operators are evaluated in order of precedence. Sub-expressions in\n" +" parentheses are evaluated first and may override the precedence\n" +" rules above.\n" +" \n" +" Exit Status:\n" +" If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise." +msgstr "" +"산술 연산을 처리합니다.\n" +" \n" +" 각 <인자>의 산술 연산을 처리합니다. 오버플로우를 검사하지 않고\n" +" 고정 길이 정수로 처리하며, 0나누기 동작은 잡혀서 오류로 표시합니다.\n" +" 다음 연산자 목록은 동일한 우선순위별로 묶었습니다. 우선순위 수준은\n" +" 우선순위가 감소하는 순서대로 나열했습니다.\n" +" \n" +" \tid++, id--\t변수의 후위 증가, 후위 감소\n" +" \t++id, --id\t변수의 전위 증가, 전위 감소\n" +" \t-, +\t\t음, 양 부호\n" +" \t!, ~\t\t논리, 비트 반전\n" +" \t**\t\t지수 연산\n" +" \t*, /, %\t\t곱하기, 나누기, 나머지\n" +" \t+, -\t\t더하기, 빼기\n" +" \t<<, >>\t\t좌측, 우측 비트 이동\n" +" \t<=, >=, <, >\t비교\n" +" \t==, !=\t\t동등, 상이\n" +" \t&\t\t비트 논리곱\n" +" \t^\t\t비트 배타합\n" +" \t|\t\t비트 논리합\n" +" \t&&\t\t논리 논리곱\n" +" \t||\t\t논리 논리합\n" +" \t<수식> ? <수식> : <수식>\n" +" \t\t\t3항 조건 연산자\n" +" \t=, *=, /=, %=,\n" +" \t+=, -=, <<=, >>=,\n" +" \t&=, ^=, |=\t할당\n" +" \n" +" 셸 변수를 피연산자로 활용할 수 있습니다. 수식 내 변수 이름은 값으로 \n" +" 바뀝니다(고정 길이 정수로 강제 변환) 변수는 수식에서 활용할 정수 \n" +" 속성을 가질 필요는 없습니다.\n" +" \n" +" 연산자는 우선순위 순서대로 처리합니다. 괄호 내 하위 연산을 우선\n" +" 처리하며, 이 또한 위의 우선순위 규칙을 따릅니다.\n" +" \n" +" 종료 상태:\n" +" <인자>가 0을 계산하면 1을 반환하고 그렇지 않으면 0을 반환합니다." + +#: builtins.c:994 +msgid "" +"Read a line from the standard input and split it into fields.\n" +" \n" +" Reads a single line from the standard input, or from file descriptor FD\n" +" if the -u option is supplied. The line is split into fields as with word\n" +" splitting, and the first word is assigned to the first NAME, the second\n" +" word to the second NAME, and so on, with any leftover words assigned to\n" +" the last NAME. Only the characters found in $IFS are recognized as word\n" +" delimiters. By default, the backslash character escapes delimiter characters\n" +" and newline.\n" +" \n" +" If no NAMEs are supplied, the line read is stored in the REPLY variable.\n" +" \n" +" Options:\n" +" -a array\tassign the words read to sequential indices of the array\n" +" \t\tvariable ARRAY, starting at zero\n" +" -d delim\tcontinue until the first character of DELIM is read, rather\n" +" \t\tthan newline\n" +" -e\tuse Readline to obtain the line\n" +" -i text\tuse TEXT as the initial text for Readline\n" +" -n nchars\treturn after reading NCHARS characters rather than waiting\n" +" \t\tfor a newline, but honor a delimiter if fewer than\n" +" \t\tNCHARS characters are read before the delimiter\n" +" -N nchars\treturn only after reading exactly NCHARS characters, unless\n" +" \t\tEOF is encountered or read times out, ignoring any\n" +" \t\tdelimiter\n" +" -p prompt\toutput the string PROMPT without a trailing newline before\n" +" \t\tattempting to read\n" +" -r\tdo not allow backslashes to escape any characters\n" +" -s\tdo not echo input coming from a terminal\n" +" -t timeout\ttime out and return failure if a complete line of\n" +" \t\tinput is not read within TIMEOUT seconds. The value of the\n" +" \t\tTMOUT variable is the default timeout. TIMEOUT may be a\n" +" \t\tfractional number. If TIMEOUT is 0, read returns\n" +" \t\timmediately, without trying to read any data, returning\n" +" \t\tsuccess only if input is available on the specified\n" +" \t\tfile descriptor. The exit status is greater than 128\n" +" \t\tif the timeout is exceeded\n" +" -u fd\tread from file descriptor FD instead of the standard input\n" +" \n" +" Exit Status:\n" +" The return code is zero, unless end-of-file is encountered, read times out\n" +" (in which case it's greater than 128), a variable assignment error occurs,\n" +" or an invalid file descriptor is supplied as the argument to -u." +msgstr "" +"표준 입력에서 행을 읽고 필드 단위로 분리합니다.\n" +" \n" +" 표준 입력 또는 -u 옵션을 지정했을 경우 파일 서술자에서 단일 행을\n" +" 읽습니다. 행은 단어를 분리할 때처럼 필드로 분리하며, 첫번째 단어는\n" +" 처음 <이름>으로, 두번째 단어는 두번째 <이름>으로 이런 식으로 할당\n" +" 하여 나머지 단어에서도 역시 그 다음 <이름>으로 할당합니다. 오직 $IFS\n" +" 의 문자만 단어 구분자로 인식합니다. 기본적으로 백슬래시 문자는 구분\n" +" 문자와 개행 문자를 이스케이핑합니다.\n" +" \n" +" <이름>을 지정하지 않으면, 해당 행을 REPLY 변수에 저장합니다.\n" +" \n" +" 옵션:\n" +" -a <배열>\t0부터 시작하는 ARRAY 배열 변수의 순차 색인을 읽을\n" +" \t\t단어를 할당합니다\n" +" -d <구분>\t개행 문자가 아닌 DELIM의 첫 글자를 읽을 때까지 계속합니다\n" +" -e\t행 읽기에 readline을 활용합니다\n" +" -i <텍스트>\treadline 초기 텍스트 값으로 TEXT를 활용합니다.\n" +" -n <문자수>\t개행 문자를 기다리기 보다는 <문자수> 만큼의 문자를 읽은 다음\n" +" \t\t반환합니다만, 구분 문자가 나타나기 전에 <문자수> 만큼 읽었을 때 개행 문자가\n" +" \t\t먼저 오면 구분 문자보다 개행 문자를 우선 처리합니다.\n" +" -N <문자수>\tEOF가 나타났거나, 읽기 시간 초과가 있지 않은 한,\n" +" \t\t<문자수> 만큼 문자를 읽은 다음 구분자를 무시하고 값을 반환합니다.\n" +" -p <프롬프트>\t읽기 전, 개행 문자를 제외하고 PROMPT 문자열을 출력합니다\n" +" -r\t문자를 이스케이핑하는 백슬래시 문자를 허용하지 않습니다\n" +" -s\t터미널의 입력에 대해 반향 출력 처리하지 않습니다\n" +" -t <제한시간>\tTIIMEOUT 초 이내에 입력 행을 완전히 읽지 않으면 실패를\n" +" \t\t반환합니다. TMOUT 변수 기본 값은 기본 제한시간입니다. TIMEOUT은\n" +" \t\t분수 값입니다. 이 값을 0으로 지정하면, 어떤 결과를 읽으려 시도하지 않고\n" +" \t\t읽은 결과를 바로 반환하며, 지정 파일 서술자에 입력이 있을 경우에만\n" +" \t\t성공을 반환합니다. 시간을 초과하면 종료 상태값은 128보다 큽니다.\n" +" -u <파일서술자>\t표준 입력 대신 파일 서술자에서 읽습니다.\n" +" \n" +" 종료 상태:\n" +" EOF가 나타나지 않았다거나, 읽기 시간을 초과하지 않았다거나(초과하면 \n" +" 128보다 큰 수 반환), 변수 할당 오류가 없었다거나, -u 옵션에 잘못된 파일\n" +" 서술자를 지정하지 않았다면 0 값을 반환합니다." + +#: builtins.c:1042 +msgid "" +"Return from a shell function.\n" +" \n" +" Causes a function or sourced script to exit with the return value\n" +" specified by N. If N is omitted, the return status is that of the\n" +" last command executed within the function or script.\n" +" \n" +" Exit Status:\n" +" Returns N, or failure if the shell is not executing a function or script." +msgstr "" +"셸 함수로부터 값을 반환합니다.\n" +" \n" +" 함수 또는 소싱 스크립트로 하여금 반환 값을 내놓도록 합니다.\n" +" <횟수>로 지정합니다. <횟수> 값을 생략하면, 반환 상태는\n" +" 스크립트 함수 내 최종 명령 실행 결과에 따릅니다.\n" +" \n" +" 종료 상태:\n" +" <횟수>를 반환하거나, 셸에서 함수 또는 스크립트를\n" +" 실행하지 않으면 실패를 반환합니다." + +#: builtins.c:1055 +msgid "" +"Set or unset values of shell options and positional parameters.\n" +" \n" +" Change the value of shell attributes and positional parameters, or\n" +" display the names and values of shell variables.\n" +" \n" +" Options:\n" +" -a Mark variables which are modified or created for export.\n" +" -b Notify of job termination immediately.\n" +" -e Exit immediately if a command exits with a non-zero status.\n" +" -f Disable file name generation (globbing).\n" +" -h Remember the location of commands as they are looked up.\n" +" -k All assignment arguments are placed in the environment for a\n" +" command, not just those that precede the command name.\n" +" -m Job control is enabled.\n" +" -n Read commands but do not execute them.\n" +" -o option-name\n" +" Set the variable corresponding to option-name:\n" +" allexport same as -a\n" +" braceexpand same as -B\n" +" emacs use an emacs-style line editing interface\n" +" errexit same as -e\n" +" errtrace same as -E\n" +" functrace same as -T\n" +" hashall same as -h\n" +" histexpand same as -H\n" +" history enable command history\n" +" ignoreeof the shell will not exit upon reading EOF\n" +" interactive-comments\n" +" allow comments to appear in interactive commands\n" +" keyword same as -k\n" +" monitor same as -m\n" +" noclobber same as -C\n" +" noexec same as -n\n" +" noglob same as -f\n" +" nolog currently accepted but ignored\n" +" notify same as -b\n" +" nounset same as -u\n" +" onecmd same as -t\n" +" physical same as -P\n" +" pipefail the return value of a pipeline is the status of\n" +" the last command to exit with a non-zero status,\n" +" or zero if no command exited with a non-zero status\n" +" posix change the behavior of bash where the default\n" +" operation differs from the Posix standard to\n" +" match the standard\n" +" privileged same as -p\n" +" verbose same as -v\n" +" vi use a vi-style line editing interface\n" +" xtrace same as -x\n" +" -p Turned on whenever the real and effective user ids do not match.\n" +" Disables processing of the $ENV file and importing of shell\n" +" functions. Turning this option off causes the effective uid and\n" +" gid to be set to the real uid and gid.\n" +" -t Exit after reading and executing one command.\n" +" -u Treat unset variables as an error when substituting.\n" +" -v Print shell input lines as they are read.\n" +" -x Print commands and their arguments as they are executed.\n" +" -B the shell will perform brace expansion\n" +" -C If set, disallow existing regular files to be overwritten\n" +" by redirection of output.\n" +" -E If set, the ERR trap is inherited by shell functions.\n" +" -H Enable ! style history substitution. This flag is on\n" +" by default when the shell is interactive.\n" +" -P If set, do not resolve symbolic links when executing commands\n" +" such as cd which change the current directory.\n" +" -T If set, the DEBUG and RETURN traps are inherited by shell functions.\n" +" -- Assign any remaining arguments to the positional parameters.\n" +" If there are no remaining arguments, the positional parameters\n" +" are unset.\n" +" - Assign any remaining arguments to the positional parameters.\n" +" The -x and -v options are turned off.\n" +" \n" +" Using + rather than - causes these flags to be turned off. The\n" +" flags can also be used upon invocation of the shell. The current\n" +" set of flags may be found in $-. The remaining n ARGs are positional\n" +" parameters and are assigned, in order, to $1, $2, .. $n. If no\n" +" ARGs are given, all shell variables are printed.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid option is given." +msgstr "" +"셸 옵션과 위치 매개변수를 설정 또는 설정 해제합니다.\n" +" \n" +" 셸 속성 값 및 위치 매개변수를 바꾸거나, 셸 변수의 이름과 값을\n" +" 표시합니다.\n" +" \n" +" 옵션:\n" +" -a 환경으로 내보내려 수정하거나 만든 변수를 표시합니다.\n" +" -b 작업 중단 알림을 즉시 수행.\n" +" -e 명령이 0 값이 아닌 상태를 내보냈다면 즉시 나감.\n" +" -f 파일 이름 생성 사용 안힘(글로빙).\n" +" -h 찾은 명령 위치 기억.\n" +" -k 명령 이름에 앞선 요소 뿐만 아니라 명령 실행에 필요한 모든\n" +" 할당 인자를 환경에 설정합니다.\n" +" -m 작업 컨트롤을 활성합니다..\n" +" -n 명령은 읽되 실행하지는 않습니다.\n" +" -o <명령-이름>\n" +" <옵션-이름>과 관련한 변수를 설정합니다:\n" +" allexport -a와 동일\n" +" braceexpand -B와 동일\n" +" emacs 이맥스 방식 행 편집 인터페이스 활용\n" +" errexit -e와 동일\n" +" errtrace -E와 동일\n" +" functrace -T와 동일\n" +" hashall -h와 동일\n" +" histexpand -H와 동일\n" +" history 명령 기록 사용\n" +" ignoreeof EOF를 읽고 나서 셸을 나가지 않음\n" +" interactive-comments\n" +" interactive commands에 나타난 주석 허용\n" +" keyword -k와 동일\n" +" monitor -m과 동일\n" +" noclobber -C와 동일\n" +" noexec -n과 동일\n" +" noglob -f와 동일\n" +" nolog 현재 허용하나 무시함\n" +" notify -b와 동일\n" +" nounset -u와 동일\n" +" onecmd -t와 동일\n" +" physical -P와 동일\n" +" pipefail 파이프라인 반환 값은 최종 명령의 0이 아닌\n" +" 종료 상태이거나, 0이 아닌 종료 상태를 반환한 명령이\n" +" 없다면 0 값을 반환함\n" +" posix 배시 동작을 바꾸어 POSIX 표준과 다른 기본 동작\n" +" 부분을 표준에 맞춤\n" +" privileged -p와 동일\n" +" verbose -v와 동일\n" +" vi vi 방식 행 종결 인터페이스\n" +" xtrace -x와 동일\n" +" -p 실제 ID와 효력상 ID가 일치하지 않을 때라도 켭니다.\n" +" $ENV 파일의 처리와 셸 함수 가져오기 동작을 끕니다.\n" +" 이 옵션을 끄면 효력상 사용자 ID와 그룹 ID를 실제\n" +" 사용자 ID와 그룹 ID로 설정합니다.\n" +" -t 명령하나를 읽고 실행한 후 나갑니다.\n" +" -u 설정 해제한 변수를 대체할 때 오류로 간주.\n" +" -v 셸 입력 행을 읽는대로 출력합니다.\n" +" -x 명령과 인자를 실행하는 대로 출력합니다.\n" +" -B 셸에 중괄호 확장을 수행하게 합니다\n" +" -C 이 옵션을 설정하면, 기존 일반 파일에 출력 방향 재지정을 통한\n" +" 내용 덮어쓰기를 허용하지 않습니다.\n" +" -E 이 옵션을 설정하면, ERR 트랩을 셸 함수에서 승계합니다.\n" +" -H ! 방식 기록 대체를 활성화합니다. 이 플래그는 셸이 대화모드일 떄\n" +" 기본적으로 사용 상태입니다..\n" +" -P 이 옵션을 설정하면, 현재 디렉터리를 바꾸는 cd 명령과 같은 그련\n" +" 명령을 실행할 때 심볼릭 링크를 해석하지 않습니다.\n" +" -T 이 옵션을 설정하면, DEBUG와 RETURN을 셸 함수에서 계승합니다..\n" +" -- 남은 인자를 위치 매개변수로 할당합니다. 남은 인자가 없으면\n" +" 위치 매개변수를 삭제합니다.\n" +" - 남은 인자를 위치 매개변수로 할당합니다. -x 옵션과 -v 옵션을 끕니다.\n" +" \n" +" 플래그를 사용하려면 + 를, 아니면 - 기호를 씁니다. 플래그는 셸 실행애\n" +" 활용할 수도 있습니다. 현재 플래그 셋은 $-에 있습니다. 남은 <인자>는\n" +" $1, $2, ... $n 순으로 할당한 위치 매개변수입니다. 지정 <인자>가 없으면\n" +" 모든 셸 변수를 출력합니다.\n" +" \n" +" 종료 상태:\n" +" 적절한 옵션을 지정하면 성공을 반환합니다." + +#: builtins.c:1140 +msgid "" +"Unset values and attributes of shell variables and functions.\n" +" \n" +" For each NAME, remove the corresponding variable or function.\n" +" \n" +" Options:\n" +" -f\ttreat each NAME as a shell function\n" +" -v\ttreat each NAME as a shell variable\n" +" -n\ttreat each NAME as a name reference and unset the variable itself\n" +" \t\trather than the variable it references\n" +" \n" +" Without options, unset first tries to unset a variable, and if that fails,\n" +" tries to unset a function.\n" +" \n" +" Some variables cannot be unset; also see `readonly'.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid option is given or a NAME is read-only." +msgstr "" +"셸 변수와 함수의 값과 속성 설정을 해제합니다.\n" +" \n" +" 각 <이름>에 대해 관련 변수 또는 함수를 제거합니다.\n" +" \n" +" 옵션:\n" +" -f\t각 <이름>을 셸 함수로 취급합니다.\n" +" -v\t각 <이름>을 셸 변수로 취급합니다.\n" +" -n\t각 <이름>을 이름 참조자로 활용하며, 이름을 참조하는 변수가 아닌\n" +" \t\t변수 자체를 참조하는 이름 설정을 해제합니다\n" +" \n" +" 옵션을 지정하지 않으면, 변수를 우선 설정 해제하려고 하며, 실패했다면,\n" +" 함수 설정 해제를 시도합니다.\n" +" \n" +" 일부 변수는 설정을 해제할 수 없습니다. `readonly' 참조.\n" +" \n" +" 종료 상태:\n" +" 적절한 옵션을 지정했거나 <이름>이 읽기 전용이 아니면 성공을 반환합니다." + +#: builtins.c:1162 +msgid "" +"Set export attribute for shell variables.\n" +" \n" +" Marks each NAME for automatic export to the environment of subsequently\n" +" executed commands. If VALUE is supplied, assign VALUE before exporting.\n" +" \n" +" Options:\n" +" -f\trefer to shell functions\n" +" -n\tremove the export property from each NAME\n" +" -p\tdisplay a list of all exported variables and functions\n" +" \n" +" An argument of `--' disables further option processing.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid option is given or NAME is invalid." +msgstr "" +"셸 변수 속성을 내보내기 설정합니다.\n" +" \n" +" 각 <이름>은 명령을 계속 실행해나가면서 환경에 내보내기(export)처리 합니다.\n" +" <값>을 지정했다면 내보내기(export) 전, <값>을 할당합니다.\n" +" \n" +" 옵션:\n" +" -f\t셸 함수를 참조합니다\n" +" -n\t각 <이름>의 내보내기 속성을 제거합니다\n" +" -p\t환경에 내보낸 변수와 함수 목록을 나타냅니다\n" +" \n" +" `--' 인자는 이후 옵션 처리를 막습니다.\n" +" \n" +" 종료 상태:\n" +" 적절한 옵션을 설정했거나 <이름>이 올바르면 성공을 반환합니다." + +#: builtins.c:1181 +msgid "" +"Mark shell variables as unchangeable.\n" +" \n" +" Mark each NAME as read-only; the values of these NAMEs may not be\n" +" changed by subsequent assignment. If VALUE is supplied, assign VALUE\n" +" before marking as read-only.\n" +" \n" +" Options:\n" +" -a\trefer to indexed array variables\n" +" -A\trefer to associative array variables\n" +" -f\trefer to shell functions\n" +" -p\tdisplay a list of all readonly variables or functions,\n" +" \t\tdepending on whether or not the -f option is given\n" +" \n" +" An argument of `--' disables further option processing.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid option is given or NAME is invalid." +msgstr "" +"셸 변수를 바꾸지 못하게 합니다.\n" +" \n" +" 각 <이름>을 읽기 전용으로 만듭니다. 이 <이름>의 값은 앞으로의 할당\n" +" 동작에서 바뀌지 않습니다. <값>을 지정했다면 읽기 전용으로 지정하기 전\n" +" <값>부터 할당합니다.\n" +" \n" +" 옵션:\n" +" -a\t색인 배열 변수를 참조합니다\n" +" -A\t연관 배열 변수를 참조합니다\n" +" -f\t셸 함수를 참조합니다\n" +" -p\t-f 옵션의 지정 여부에 따라 모든 읽기 전용 변수\n" +" \t\t또는 함수를 표시합니다\n" +" \n" +" `--' 인자는 이후 옵션 처리를 중단합니다.\n" +" \n" +" 종료 상태:\n" +" 적절한 옵션을 지정했거나 <이름>이 올바르면 성공을 반환합니다." + +#: builtins.c:1203 +msgid "" +"Shift positional parameters.\n" +" \n" +" Rename the positional parameters $N+1,$N+2 ... to $1,$2 ... If N is\n" +" not given, it is assumed to be 1.\n" +" \n" +" Exit Status:\n" +" Returns success unless N is negative or greater than $#." +msgstr "" +"위치 매개변수를 이동합니다.\n" +" \n" +" <초기횟수> 값을 지정하지 않으면 , $<초기횟수>+1, $<초기횟수>+2,\n" +" ... $1, $2 ... 로 위치 매개변수 이름을 바꾸며, <초기횟수> 값은 1로 가정합니다.\n" +" \n" +" 종료 상태:\n" +" <횟수>가 양수거나 $# 보다 작거나 같으면 성공을 반환합니다." + +#: builtins.c:1215 builtins.c:1230 +msgid "" +"Execute commands from a file in the current shell.\n" +" \n" +" Read and execute commands from FILENAME in the current shell. The\n" +" entries in $PATH are used to find the directory containing FILENAME.\n" +" If any ARGUMENTS are supplied, they become the positional parameters\n" +" when FILENAME is executed.\n" +" \n" +" Exit Status:\n" +" Returns the status of the last command executed in FILENAME; fails if\n" +" FILENAME cannot be read." +msgstr "" +"현재 셸의 파일에서 명령을 실행합니다.\n" +" \n" +" 현제 셸의 <파일이름>에서 명령을 읽고 실행합니다. $PATH 항목은 <파일\n" +" 이름>에 있는 디렉터리를 찾을 때 활용합니다. <인자>를 지정했다면, \n" +" <파일이름>을 실행할 때 위치 매개 변수가 따라옵니다.\n" +" \n" +" 종료 상태:\n" +" <파일이름>의 마지막 명령 실행 상태를 반환합니다. <파일이름>을\n" +" 읽지 못하면, 실패를 반환합니다." + +#: builtins.c:1246 +msgid "" +"Suspend shell execution.\n" +" \n" +" Suspend the execution of this shell until it receives a SIGCONT signal.\n" +" Unless forced, login shells cannot be suspended.\n" +" \n" +" Options:\n" +" -f\tforce the suspend, even if the shell is a login shell\n" +" \n" +" Exit Status:\n" +" Returns success unless job control is not enabled or an error occurs." +msgstr "" +"셸 실행을 잠시 멈춥니다.\n" +" \n" +" SIGCONT 시그널를 받을 때 까지 셸의 실행을 일시 정지합니다.\n" +" 강제 옵션이 없는 경우 로그인 셸은 일시 정지될 수 없습니다.\n" +" \n" +" 옵션:\n" +" -f\t로그인 셸의 경우에도 일시 정지를 강제합니다.\n" +" \n" +" 종료 상태:\n" +" 작업 컨트롤이 동작하거나 오류가 없으면 성공을 반환합니다." + +#: builtins.c:1262 +msgid "" +"Evaluate conditional expression.\n" +" \n" +" Exits with a status of 0 (true) or 1 (false) depending on\n" +" the evaluation of EXPR. Expressions may be unary or binary. Unary\n" +" expressions are often used to examine the status of a file. There\n" +" are string operators and numeric comparison operators as well.\n" +" \n" +" The behavior of test depends on the number of arguments. Read the\n" +" bash manual page for the complete specification.\n" +" \n" +" File operators:\n" +" \n" +" -a FILE True if file exists.\n" +" -b FILE True if file is block special.\n" +" -c FILE True if file is character special.\n" +" -d FILE True if file is a directory.\n" +" -e FILE True if file exists.\n" +" -f FILE True if file exists and is a regular file.\n" +" -g FILE True if file is set-group-id.\n" +" -h FILE True if file is a symbolic link.\n" +" -L FILE True if file is a symbolic link.\n" +" -k FILE True if file has its `sticky' bit set.\n" +" -p FILE True if file is a named pipe.\n" +" -r FILE True if file is readable by you.\n" +" -s FILE True if file exists and is not empty.\n" +" -S FILE True if file is a socket.\n" +" -t FD True if FD is opened on a terminal.\n" +" -u FILE True if the file is set-user-id.\n" +" -w FILE True if the file is writable by you.\n" +" -x FILE True if the file is executable by you.\n" +" -O FILE True if the file is effectively owned by you.\n" +" -G FILE True if the file is effectively owned by your group.\n" +" -N FILE True if the file has been modified since it was last read.\n" +" \n" +" FILE1 -nt FILE2 True if file1 is newer than file2 (according to\n" +" modification date).\n" +" \n" +" FILE1 -ot FILE2 True if file1 is older than file2.\n" +" \n" +" FILE1 -ef FILE2 True if file1 is a hard link to file2.\n" +" \n" +" String operators:\n" +" \n" +" -z STRING True if string is empty.\n" +" \n" +" -n STRING\n" +" STRING True if string is not empty.\n" +" \n" +" STRING1 = STRING2\n" +" True if the strings are equal.\n" +" STRING1 != STRING2\n" +" True if the strings are not equal.\n" +" STRING1 < STRING2\n" +" True if STRING1 sorts before STRING2 lexicographically.\n" +" STRING1 > STRING2\n" +" True if STRING1 sorts after STRING2 lexicographically.\n" +" \n" +" Other operators:\n" +" \n" +" -o OPTION True if the shell option OPTION is enabled.\n" +" -v VAR True if the shell variable VAR is set.\n" +" -R VAR True if the shell variable VAR is set and is a name\n" +" reference.\n" +" ! EXPR True if expr is false.\n" +" EXPR1 -a EXPR2 True if both expr1 AND expr2 are true.\n" +" EXPR1 -o EXPR2 True if either expr1 OR expr2 is true.\n" +" \n" +" arg1 OP arg2 Arithmetic tests. OP is one of -eq, -ne,\n" +" -lt, -le, -gt, or -ge.\n" +" \n" +" Arithmetic binary operators return true if ARG1 is equal, not-equal,\n" +" less-than, less-than-or-equal, greater-than, or greater-than-or-equal\n" +" than ARG2.\n" +" \n" +" Exit Status:\n" +" Returns success if EXPR evaluates to true; fails if EXPR evaluates to\n" +" false or an invalid argument is given." +msgstr "" +"조건식을 처리합니다.\n" +" \n" +" <표현식>의 계산 결과에 따라 0(참) 또는 1(거짓) 상태 값을\n" +" 내며 빠져나옵니다. 수식은 단항 수식 또는 이항 수식일 수 있습니다.\n" +" 단항 수식은 보통 파일 상태를 확인할 때 사용합니다. 숫자 비교 \n" +" 연산자와 마찬가지로 문자열 연산자도 있습니다.\n" +" \n" +" 테스트 동작은 인자 갯수에 따릅니다. 완전한 내용을 알아보려면,\n" +" 배시 설명서 페이지를 읽어보십시오.\n" +" \n" +" 파일 연산자:\n" +" \n" +" -a <파일> 파일이 있으면 참.\n" +" -b <파일> 블록 특수 파일이면 참.\n" +" -c <파일> 문자 특수 파일이면 참.\n" +" -d <파일> 파일이 디렉터리면 참.\n" +" -e <파일> 파일이 있으면 참.\n" +" -f <파일> 일반 파일이 있으면 참.\n" +" -g <파일> 파일이 그룹 ID 모음이면 참.\n" +" -h <파일> 파일이 심볼릭 링크면 참.\n" +" -L <파일> 파일이 심볼릭 링크면 참.\n" +" -k <파일> 파일에 `끈적이' 비트 설정이 있으면 참.\n" +" -p <파일> 파일이 명명 파이프면 참.\n" +" -r <파일> 파일을 읽을 수 잇으면 참.\n" +" -s <파일> 비아있지 않은 파일이 있으면 참.\n" +" -S <파일> 소켓 파일이면 참.\n" +" -t <파일서술자> <파일서술자>를 터미널에서 열면 참.\n" +" -u <파일> 파일이 사용자 ID 세트면 참.\n" +" -w <파일> 파일을 기록할 수 있으면 참.\n" +" -x <파일> 파일을 실행할 수 있으면 참.\n" +" -O <파일> 파일을 명백히 소유하면 참.\n" +" -G <파일> 파일을 명백시 소속 그룹에서 소유하면 참.\n" +" -N <파일> 파일을 읽은 후 수정했다면 참.\n" +" \n" +" <파일1> -nt <파일2> 파일1이 파일2보다 최신이면\n" +" (수정일자에 따라)참.\n" +" \n" +" <파일1> -ot <파일2> 파일2가 파일1보다 최신이면 참.\n" +" \n" +" <파일1> -ef <파일2> 파일1이 파일2의 하드링크라면 참.\n" +" \n" +" 문자열 연산자:\n" +" \n" +" -z <문자열> 문자열이 비었으면 참.\n" +" \n" +" -n <문자열>\n" +" <문자열> 문자열이 있으면 참.\n" +" \n" +" <문자열1> = <문자열2>\n" +" 문자열이 같으면 참.\n" +" <문자열1> != <문자열2>\n" +" 문자열이 다르면 참.\n" +" <문자열1> < <문자열2>\n" +" 문자열1이 문자열2보다 문자 순서상 먼저일 경우 참.\n" +" <문자열1> > <문자열2>\n" +" 문자열1이 문자열2보다 문자 순서상 나중일 경우 참.\n" +" \n" +" 기타 연산:\n" +" \n" +" -o <옵션> 셸 <옵션>을 사용할 수 있으면 참.\n" +" -v <변수> 셸 <변수>를 설정하면 참.\n" +" -R <변수> 셸 <변수>를 이름 참조로 설정하면 참.\n" +" \n" +" ! <표현식> 표현식이 거짓이면 참.\n" +" <표현식1> -a <표현식2> <표현식1>, <표현식2>가 모두 참이면 참.\n" +" <표현식1> -o <표현식2> <표현식1> 또는 <표현식2> 둘 중 하나가 참이면 참.\n" +" \n" +" <변수1> <연산자> <변수2> 산술 시험. <연산자>는 -eq, -ne,\n" +" -lt, -le, -gt, or -ge 중 하나.\n" +" \n" +" 산술 이진 연산자는 <인자1>과 <인자2>가 같거나, 다르거나, 작거나, 작고\n" +" 같거나, 크거나, 크고 같을 경우 참을 반환합니다\n" +" \n" +" 종료 상태:\n" +" <표현식>이 참이면 성공을 반환합니다. <표현식>이 거짓을 결과로 냈거나\n" +" 부적절한 인자를 대입하면 실패를 반환합니다." + +#: builtins.c:1344 +msgid "" +"Evaluate conditional expression.\n" +" \n" +" This is a synonym for the \"test\" builtin, but the last argument must\n" +" be a literal `]', to match the opening `['." +msgstr "" +"조건식을 처리합니다.\n" +" \n" +" \"test\" 내장 명령의 동의 명령입니다만, 마지막 인자는 반드시\n" +" `]' 문자로 마무리하여 열기 괄호 `['와 일치해야합니다." + +#: builtins.c:1353 +msgid "" +"Display process times.\n" +" \n" +" Prints the accumulated user and system times for the shell and all of its\n" +" child processes.\n" +" \n" +" Exit Status:\n" +" Always succeeds." +msgstr "" +"프로세스 시간을 표시합니다.\n" +" \n" +" 셸의 사용자 및 시스템 누적 시간, 하위 프로세스의 누적 시간을\n" +" 나타냅니다.\n" +" \n" +" 종료 상태:\n" +" 항상 성공." + +#: builtins.c:1365 +msgid "" +"Trap signals and other events.\n" +" \n" +" Defines and activates handlers to be run when the shell receives signals\n" +" or other conditions.\n" +" \n" +" ARG is a command to be read and executed when the shell receives the\n" +" signal(s) SIGNAL_SPEC. If ARG is absent (and a single SIGNAL_SPEC\n" +" is supplied) or `-', each specified signal is reset to its original\n" +" value. If ARG is the null string each SIGNAL_SPEC is ignored by the\n" +" shell and by the commands it invokes.\n" +" \n" +" If a SIGNAL_SPEC is EXIT (0) ARG is executed on exit from the shell. If\n" +" a SIGNAL_SPEC is DEBUG, ARG is executed before every simple command. If\n" +" a SIGNAL_SPEC is RETURN, ARG is executed each time a shell function or a\n" +" script run by the . or source builtins finishes executing. A SIGNAL_SPEC\n" +" of ERR means to execute ARG each time a command's failure would cause the\n" +" shell to exit when the -e option is enabled.\n" +" \n" +" If no arguments are supplied, trap prints the list of commands associated\n" +" with each signal.\n" +" \n" +" Options:\n" +" -l\tprint a list of signal names and their corresponding numbers\n" +" -p\tdisplay the trap commands associated with each SIGNAL_SPEC\n" +" \n" +" Each SIGNAL_SPEC is either a signal name in or a signal number.\n" +" Signal names are case insensitive and the SIG prefix is optional. A\n" +" signal may be sent to the shell with \"kill -signal $$\".\n" +" \n" +" Exit Status:\n" +" Returns success unless a SIGSPEC is invalid or an invalid option is given." +msgstr "" +"시그널과 기타 이벤트를 잡습니다.\n" +" \n" +" 셸에서 시그널 또는 기타 상태를 받았을 때 실행할 핸들러를 지정하고 활성\n" +" 상태로 전환합니다.\n" +" \n" +" <인자>는 <시그널명세>의 시그널을 셸에서 받았을 때 읽고 실행할 명령\n" +" 입니다. <인자>값이 빠지면 (그리고 단일 <시그널명세> 값을 지정하면)\n" +" 또는 값이 `-'으로 설정했다면, 각 지정 시그널을 원래 값으로 되돌립니다.\n" +" <인자>에 널 문자열이 들어갔다면, 각 <시그널명세> 값은 셸과 실행 명령\n" +" 에서 무시합니다.\n" +" \n" +" <시그널명세>가 EXIT(0) 이면 <인자>는 셸을 빠져나갈 떄 실행합니다.\n" +" <시그널명세>가 DEBUG면, 모든 단순 명령을 실행하기 전에 <인자>를\n" +" 실행 합니다. <시그널명세>가 RETURN이면, <인자>는 . 또는 원시 내장 \n" +" 명령 실행을 끝내는 셸 함수 또는 스크립트를 실행할 때마다 실행합니다.\n" +" <오류> <시그널명세> 는 -e 옵션을 넣었을 때, 셸을 빠져나오게 하는 \n" +" 명령 실패를 겪을 때마다 <인자>를 실행합니다.\n" +" \n" +" 어떤 인자도 지정하지 않으면 trap에서 각 시그널 별로 실행하는 명령\n" +" 목록을 출력합니다.\n" +" \n" +" 옵션:\n" +" -l\t시그널 이름과 관련 숫자 목록을 출력합니다\n" +" -p\t각 <시그널명세> 관련 처리 명령을 표시합니다\n" +" \n" +" 각 <시그널명세>는 에 지정한 시그널 이름이거나 시그널\n" +" 번호입니다. 시그널 이름은 대소문자 무관하며, SIG 접두사는 선택사항\n" +" 입니다. 시그널은 \"kill -signal $$\" 처럼 셸에 보낼 수 있습니다.\n" +" \n" +" 종료 상태:\n" +" 적절한 <시그널명세> 또는 옵션을 지정했다면 성공을 반환합니다." + +#: builtins.c:1401 +msgid "" +"Display information about command type.\n" +" \n" +" For each NAME, indicate how it would be interpreted if used as a\n" +" command name.\n" +" \n" +" Options:\n" +" -a\tdisplay all locations containing an executable named NAME;\n" +" \t\tincludes aliases, builtins, and functions, if and only if\n" +" \t\tthe `-p' option is not also used\n" +" -f\tsuppress shell function lookup\n" +" -P\tforce a PATH search for each NAME, even if it is an alias,\n" +" \t\tbuiltin, or function, and returns the name of the disk file\n" +" \t\tthat would be executed\n" +" -p\treturns either the name of the disk file that would be executed,\n" +" \t\tor nothing if `type -t NAME' would not return `file'\n" +" -t\toutput a single word which is one of `alias', `keyword',\n" +" \t\t`function', `builtin', `file' or `', if NAME is an alias,\n" +" \t\tshell reserved word, shell function, shell builtin, disk file,\n" +" \t\tor not found, respectively\n" +" \n" +" Arguments:\n" +" NAME\tCommand name to be interpreted.\n" +" \n" +" Exit Status:\n" +" Returns success if all of the NAMEs are found; fails if any are not found." +msgstr "" +"명령 형식 정보를 표시합니다.\n" +" \n" +" 각 <이름>에 대해 명령 이름으로 활용할 때 어떻게 해석하는지\n" +" 나타냅니다.\n" +" \n" +" 옵션:\n" +" -a\t<이름>이 들어간 모든 실행 파일 보관 위치를 나타냅니다.\n" +" \t\t별칭, 내장명령, 함수가 해당하며, `-p' 옵션은 사용하지\n" +" \t\t 말아야합니다.\n" +" -f\t셸 함수 찾기 동작을 멈춥니다\n" +" -P\t각 <이름>별로 별칭, 내장 명령, 함수로 해도 PATH 검색을 강제\n" +" \t\t시행하며, 실행 파일 디스크 이름을 반환합니다\n" +" -p\t실행할 디스크 파일 이름을 반환하거나 , `type -t <이름>'을\n" +" \t\t`file'로 반환하지 않으면 아무것도 반환하지 않습니다.\n" +" -t\t<이름>이 별칭, 셸 예약 단어, 셸 함수, 셸 내장 명령, 디스크 파일\n" +" \t\t 또는 없음 여부에 따라 `alias', `keyword', `function', `builtin',\n" +" \t\t `file', `' 중 하나를 반환합니다.\n" +" \n" +" 인자:\n" +" <이름>\t해석할 명령 이름.\n" +" \n" +" 종료 상태:\n" +" 모든 <이름>을 찾으면 성공을 반환, 그렇지 않으면 실패를 반환합니다." + +#: builtins.c:1432 +msgid "" +"Modify shell resource limits.\n" +" \n" +" Provides control over the resources available to the shell and processes\n" +" it creates, on systems that allow such control.\n" +" \n" +" Options:\n" +" -S\tuse the `soft' resource limit\n" +" -H\tuse the `hard' resource limit\n" +" -a\tall current limits are reported\n" +" -b\tthe socket buffer size\n" +" -c\tthe maximum size of core files created\n" +" -d\tthe maximum size of a process's data segment\n" +" -e\tthe maximum scheduling priority (`nice')\n" +" -f\tthe maximum size of files written by the shell and its children\n" +" -i\tthe maximum number of pending signals\n" +" -k\tthe maximum number of kqueues allocated for this process\n" +" -l\tthe maximum size a process may lock into memory\n" +" -m\tthe maximum resident set size\n" +" -n\tthe maximum number of open file descriptors\n" +" -p\tthe pipe buffer size\n" +" -q\tthe maximum number of bytes in POSIX message queues\n" +" -r\tthe maximum real-time scheduling priority\n" +" -s\tthe maximum stack size\n" +" -t\tthe maximum amount of cpu time in seconds\n" +" -u\tthe maximum number of user processes\n" +" -v\tthe size of virtual memory\n" +" -x\tthe maximum number of file locks\n" +" -P\tthe maximum number of pseudoterminals\n" +" -R\tthe maximum time a real-time process can run before blocking\n" +" -T\tthe maximum number of threads\n" +" \n" +" Not all options are available on all platforms.\n" +" \n" +" If LIMIT is given, it is the new value of the specified resource; the\n" +" special LIMIT values `soft', `hard', and `unlimited' stand for the\n" +" current soft limit, the current hard limit, and no limit, respectively.\n" +" Otherwise, the current value of the specified resource is printed. If\n" +" no option is given, then -f is assumed.\n" +" \n" +" Values are in 1024-byte increments, except for -t, which is in seconds,\n" +" -p, which is in increments of 512 bytes, and -u, which is an unscaled\n" +" number of processes.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid option is supplied or an error occurs." +msgstr "" +"셸 자원 제한을 조정합니다.\n" +" \n" +" 셸과 생성 프로세스를 제어하는 시스템에서 사용할 수 있는 자원의\n" +" 제어 전반을 제공합니다.\n" +" \n" +" 옵션:\n" +" -S\t`soft' 자원 제한을 활용합니다\n" +" -H\t`hard' 자원 제한을 활용합니다\n" +" -a\t현재 모든 제한 현황을 보고합니다\n" +" -b\t소켓 버퍼 킂기\n" +" -c\t생성 핵심 파일 최대 크기\n" +" -d\t프로세스 데이터 세그먼트 최대 크기\n" +" -e\t최대 스케쥴링 우선순위 (`nice')\n" +" -f\t셸과 하위 프로세스에서 작성한 파일의 최대 크기\n" +" -i\t최대 대기 시그널 수\n" +" -k\t프로세스에 할당한 커널 큐 최대 수\n" +" -l\t메모리에서 잠글 프로세스 최대 수\n" +" -m\t최대 점유 설정 크기\n" +" -n\t파일 서술자 개방 최대 갯수\n" +" -p\t파이프 버퍼 크기\n" +" -q\tPOSIX 메시지 큐 최대 바이트 단위 크기\n" +" -r\t최대 실시간 스케쥴링 우선순위\n" +" -s\t최대 스택 크기\n" +" -t\t초단위 최대 CPU 시간\n" +" -u\t최대 사용자 프로세스 수\n" +" -v\t가상 메모리 크기\n" +" -x\t최대 파일 잠금 수\n" +" -P\t가상 터미널 최대 갯수\n" +" -R\t블로킹 전 실시간 프로세스 최대 실행 가능 시간\n" +" -T\t최대 스레드 수\n" +" \n" +" 모든 플랫폼에서 모든 옵션을 활용할 수 있는건 아닙니다.\n" +" \n" +" <한계>값이 주어지면, 지정 자원의 새 값이 됩니다. `soft', `hard', \n" +" `unlimited' <한계> 값은 현재 soft 한계, hard 한계, 한계 없음을 각각\n" +" 의미합니다. 아니면, 지정 자원의 현재 값을 출력합니다. 옵션을 지정\n" +" 하지 않으면, -f 옵션을 설정한 걸로 간주합니다.\n" +" \n" +" 초 단위를 취급하는 -t 옵션과 512 바이트 단위로 증가하는 -p 옵션,\n" +" 그리고 크기를 갖지 않는 프로세스 수를 취급하는 -u 옵션을 제외하고,\n" +" 1024 바이트씩 값을 증가합니다.\n" +" \n" +" 종료 상태:\n" +" 옵션을 올바르게 설정했거나 오류가 없다면 성공을 반환합니다." + +#: builtins.c:1483 +msgid "" +"Display or set file mode mask.\n" +" \n" +" Sets the user file-creation mask to MODE. If MODE is omitted, prints\n" +" the current value of the mask.\n" +" \n" +" If MODE begins with a digit, it is interpreted as an octal number;\n" +" otherwise it is a symbolic mode string like that accepted by chmod(1).\n" +" \n" +" Options:\n" +" -p\tif MODE is omitted, output in a form that may be reused as input\n" +" -S\tmakes the output symbolic; otherwise an octal number is output\n" +" \n" +" Exit Status:\n" +" Returns success unless MODE is invalid or an invalid option is given." +msgstr "" +"파일 모드 마스크를 표시하거나 설정합니다.\n" +" \n" +" 사용자 파일 생성 마스크를 <모드>로 설정합니다. <모드>를 생략하면,\n" +" 마스크 현재 값을 출력합니다.\n" +" \n" +" <모드>를 숫자로 시작하면, 8진수로 해석합니다. 그렇지 않으면 chmod(1)\n" +" 에서 인식하는 심볼릭 모드 문자열이 됩니다.\n" +" \n" +" 웁션:\n" +" -p\t<모드>를 생략하면 입력으로 재활용할 형식으로 출력합니다\n" +" -S\t출력 심볼릭을 만듭니다. 그렇지 않으면 8진수로 출력합니다\n" +" \n" +" 종료 상태:\n" +" <모드>가 올바르거나 옵션을 적절하게 설정하면 성공을 반환합니다." + +#: builtins.c:1503 +msgid "" +"Wait for job completion and return exit status.\n" +" \n" +" Waits for each process identified by an ID, which may be a process ID or a\n" +" job specification, and reports its termination status. If ID is not\n" +" given, waits for all currently active child processes, and the return\n" +" status is zero. If ID is a job specification, waits for all processes\n" +" in that job's pipeline.\n" +" \n" +" If the -n option is supplied, waits for a single job from the list of IDs,\n" +" or, if no IDs are supplied, for the next job to complete and returns its\n" +" exit status.\n" +" \n" +" If the -p option is supplied, the process or job identifier of the job\n" +" for which the exit status is returned is assigned to the variable VAR\n" +" named by the option argument. The variable will be unset initially, before\n" +" any assignment. This is useful only when the -n option is supplied.\n" +" \n" +" If the -f option is supplied, and job control is enabled, waits for the\n" +" specified ID to terminate, instead of waiting for it to change status.\n" +" \n" +" Exit Status:\n" +" Returns the status of the last ID; fails if ID is invalid or an invalid\n" +" option is given, or if -n is supplied and the shell has no unwaited-for\n" +" children." +msgstr "" +"작업 완료를 기다리며 종료 상태를 반환합니다.\n" +" \n" +" 프로세스 ID 또는 작업 명세가 될 ID로 식별하는 각 프로세스를 \n" +" 기다리며, 중단 상태를 보고합니다. ID가 주어지지 않으면 현재의\n" +" 모든 활성 하위 프로세스를 기다리며, 반환 상태 값은 0입니다.\n" +" ID가 작업 명세라면 작업 파이프라인의 모든 프로세스를 기다립니다.\n" +" \n" +" -n 옵션을 지정하면 ID 목록의 단일 작업을 기다리며, ID를 지정하지\n" +" 않으면, 다음 작업 완료시까지 기다리고 해당 작업의 종료 상태를 반환\n" +" 합니다.\n" +" \n" +" -p 옵션을 지정하면 종료 상태를 반환할 작업의 프로세스 또는 작업\n" +" 식별자룰 옵션 인자가 명명한 <변수>에 할당합니다. 변수는 할당 전\n" +" 설정을 해제할 수 있습니다. 보통 -n 옵션을 지정할 때만 쓸만합니다.\n" +" \n" +" -f 옵션을 지정하고 작업 컨트롤을 사용하면 지정 ID의 상태가 바뀌기를\n" +" 기다리기보다는, 중단 시기를 기다립니다.\n" +" \n" +" 종료 상태:\n" +" 최종 ID의 상태를 반환합니다. ID가 잘못되었거나 잘못된 옵션을 지정\n" +" 했다든지, -n 옵션을 지정하고 셸에서 하위 프로세스를 기다리지 않는\n" +" 다면 실패를 반환합니다." + +#: builtins.c:1534 +msgid "" +"Wait for process completion and return exit status.\n" +" \n" +" Waits for each process specified by a PID and reports its termination status.\n" +" If PID is not given, waits for all currently active child processes,\n" +" and the return status is zero. PID must be a process ID.\n" +" \n" +" Exit Status:\n" +" Returns the status of the last PID; fails if PID is invalid or an invalid\n" +" option is given." +msgstr "" +"프로세스 처리 완료를 기다리고 종료 상태를 반환합니다.\n" +" \n" +" 지정 의 각 프로세스를 기다리며, 종료 상태를 보고합니다.\n" +" 를 지정하지 않으면 모든 현재 하위 활성 프로세스를 기다리며,\n" +" 반환 상태는 0이 됩니다. 는 프로세스 ID여야 합니다.\n" +" \n" +" 종료 상태:\n" +" 최종 PID의 상태를 반환합니다. PID 값이 잘못되었거나,\n" +" 부적절한 옵션을 지정하면 실패를 반환합니다." + +#: builtins.c:1549 +msgid "" +"Execute commands for each member in a list.\n" +" \n" +" The `for' loop executes a sequence of commands for each member in a\n" +" list of items. If `in WORDS ...;' is not present, then `in \"$@\"' is\n" +" assumed. For each element in WORDS, NAME is set to that element, and\n" +" the COMMANDS are executed.\n" +" \n" +" Exit Status:\n" +" Returns the status of the last command executed." +msgstr "" +"목록 각 구성 요소의 명령을 실행합니다.\n" +" \n" +" `for' 반복문은 항목 목록 각 구성요소의 명령 목록을 실행합니다.\n" +" `in <단어> ...;' 식으로 나타나지 않으면, `in $@\"'으로 가정합니다.\n" +" <단어>의 각 요소에 대해 <이름>을 해당 요소에 설정하고,\n" +" <명령>을 실행합니다.\n" +" \n" +" 종료 상태:\n" +" 최종 명령 실행 상태를 반환합니다." + +#: builtins.c:1563 +msgid "" +"Arithmetic for loop.\n" +" \n" +" Equivalent to\n" +" \t(( EXP1 ))\n" +" \twhile (( EXP2 )); do\n" +" \t\tCOMMANDS\n" +" \t\t(( EXP3 ))\n" +" \tdone\n" +" EXP1, EXP2, and EXP3 are arithmetic expressions. If any expression is\n" +" omitted, it behaves as if it evaluates to 1.\n" +" \n" +" Exit Status:\n" +" Returns the status of the last command executed." +msgstr "" +"반복문의 산술 연산을 실행합니다.\n" +" \n" +" 다음과 동일합니다\n" +" \t(( <표현식1> ))\n" +" \twhile (( <표현식2> )); do\n" +" \t\t <명령>\n" +" \t\t (( 표현식3 ))\n" +" \tdone\n" +" <표현식1>, <표현식2>, <표현식3> 은 산술 수식입니다. 어떤 수식이든 생략하면\n" +" 1 값을 계산한걸로 간주합니다.\n" +" \n" +" 종료 상태:\n" +" 최종 명령 실행 상태를 반환합니다." + +#: builtins.c:1581 +msgid "" +"Select words from a list and execute commands.\n" +" \n" +" The WORDS are expanded, generating a list of words. The\n" +" set of expanded words is printed on the standard error, each\n" +" preceded by a number. If `in WORDS' is not present, `in \"$@\"'\n" +" is assumed. The PS3 prompt is then displayed and a line read\n" +" from the standard input. If the line consists of the number\n" +" corresponding to one of the displayed words, then NAME is set\n" +" to that word. If the line is empty, WORDS and the prompt are\n" +" redisplayed. If EOF is read, the command completes. Any other\n" +" value read causes NAME to be set to null. The line read is saved\n" +" in the variable REPLY. COMMANDS are executed after each selection\n" +" until a break command is executed.\n" +" \n" +" Exit Status:\n" +" Returns the status of the last command executed." +msgstr "" +"단어를 목록에서 선택하고 명령을 실행합니다.\n" +" \n" +" <단어>는 단어 목록을 만들 때 확장합니다. 확장 단어는 표준 오류에\n" +" 출력하며, 출력행에 숫자가 붙습니다. 각 `in <단어>'가 없다면 `in \"$@\"'\n" +" 를 고려합니다. 그 다음 PS3 프롬프트를 나타내고 표준 입력에서 \n" +" 읽습니다. 표시 단어 중 하나의 숫자로 행을 구성했다면, <이름>\n" +" 을 해당 단어에 설정합니다. 행이 비어있으면, <단어>와 프롬프트는\n" +" 다시 나타납니다. EOF (파일 끝)을 읽으면, 명령 실행이 끝납니다.\n" +" 다른 값을 읽으면 <이름>을 null로 설정할 수도 있습니다. 읽은 행은\n" +" REPLY 변수에 저장합니다. <명령>은 break 명령을 실행하기 전까지\n" +" 각 선택 때마다 실행합니다.\n" +" \n" +" 종료 상태:\n" +" 마지막 명령 실행 상태를 반환합니다." + +#: builtins.c:1602 +msgid "" +"Report time consumed by pipeline's execution.\n" +" \n" +" Execute PIPELINE and print a summary of the real time, user CPU time,\n" +" and system CPU time spent executing PIPELINE when it terminates.\n" +" \n" +" Options:\n" +" -p\tprint the timing summary in the portable Posix format\n" +" \n" +" The value of the TIMEFORMAT variable is used as the output format.\n" +" \n" +" Exit Status:\n" +" The return status is the return status of PIPELINE." +msgstr "" +"파이프라인 실행의 소요 시간을 보고합니다.\n" +" \n" +" <파이프라인>을 실행한 후 파이프라인이 멈췄을 때, <파이프라인> 실행에\n" +" 걸린 실제 시간, 사용자 CPU 시간, 시스템 CPU 시간 요약 내용을 출력합니다.\n" +" \n" +" 옵션:\n" +" -p\t이식성이 있는 POSIX 형식의 타이밍 요약 내용을 출력합니다.\n" +" \n" +" TIMEFORMAT 변수의 값은 출력 형식에 활용합니다.\n" +" \n" +" 종료 상태:\n" +" <파이프라인>의 반환 상태가 곧 반환 상태 입니다." + +#: builtins.c:1619 +msgid "" +"Execute commands based on pattern matching.\n" +" \n" +" Selectively execute COMMANDS based upon WORD matching PATTERN. The\n" +" `|' is used to separate multiple patterns.\n" +" \n" +" Exit Status:\n" +" Returns the status of the last command executed." +msgstr "" +"패턴 일치에 기반하여 명령을 실행합니다.\n" +" \n" +" <패턴>에 일치하는 <단어> 기반으로 <명령>을 별도로 실행합니다.\n" +" `|' 문자로 여러 패턴을 나눌 수 있습니다.\n" +" \n" +" 종료 상태:\n" +" 최종 명령 실행 상태를 반환합니다." + +#: builtins.c:1631 +msgid "" +"Execute commands based on conditional.\n" +" \n" +" The `if COMMANDS' list is executed. If its exit status is zero, then the\n" +" `then COMMANDS' list is executed. Otherwise, each `elif COMMANDS' list is\n" +" executed in turn, and if its exit status is zero, the corresponding\n" +" `then COMMANDS' list is executed and the if command completes. Otherwise,\n" +" the `else COMMANDS' list is executed, if present. The exit status of the\n" +" entire construct is the exit status of the last command executed, or zero\n" +" if no condition tested true.\n" +" \n" +" Exit Status:\n" +" Returns the status of the last command executed." +msgstr "" +"조건 기반으로 명령을 실행합니다.\n" +" \n" +" `if <명령>' 목록을 실행합니다. 종료 상태값이 0이면, `then <명령>'\n" +" 목록도 실행합니다. 아니면, `elif <명령>' 목록도 실행하며, 종료 상태\n" +" 값이 0이면 관련 `then <명령>' 목록을 실행하여 if 명령의 처리가 끝\n" +" 납니다. 위 과정에 만족하지 않으면 `else <명령>' 목록이 있을 경우\n" +" 실행합니다. 전체 명령 구성의 종료 상태 값은 최종 명령 실행 종료\n" +" 상태값이며, 또는 어떤 조건에서도 참이 아닌 경우 0이 됩니다.\n" +" \n" +" 종료 상태:\n" +" 최종 명령 실행 상태 값을 반환합니다." + +#: builtins.c:1648 +msgid "" +"Execute commands as long as a test succeeds.\n" +" \n" +" Expand and execute COMMANDS-2 as long as the final command in COMMANDS has\n" +" an exit status of zero.\n" +" \n" +" Exit Status:\n" +" Returns the status of the last command executed." +msgstr "" +"테스트에 성공하는 동안 명령을 실행합니다.\n" +" \n" +" <명령>의 최종 명령 종료 상태가 0인 동안 <명령-2>로 확장 실행합니다.\n" +" \n" +" 종료 상태:\n" +" 최종 명령 상태를 반환합니다." + +#: builtins.c:1660 +msgid "" +"Execute commands as long as a test does not succeed.\n" +" \n" +" Expand and execute COMMANDS-2 as long as the final command in COMMANDS has\n" +" an exit status which is not zero.\n" +" \n" +" Exit Status:\n" +" Returns the status of the last command executed." +msgstr "" +"테스트에 실패하는 동안 명령을 실행합니다.\n" +" \n" +" <명령>의 최종 명령 종료 상태가 0이 아니면 <명령-2>로 확장 실행합니다.\n" +" \n" +" 종료 상태:\n" +" 최종 명령 실행 상태를 반환합니다." + +#: builtins.c:1672 +msgid "" +"Create a coprocess named NAME.\n" +" \n" +" Execute COMMAND asynchronously, with the standard output and standard\n" +" input of the command connected via a pipe to file descriptors assigned\n" +" to indices 0 and 1 of an array variable NAME in the executing shell.\n" +" The default NAME is \"COPROC\".\n" +" \n" +" Exit Status:\n" +" The coproc command returns an exit status of 0." +msgstr "" +"<이름>으로 병행 프로세스를 만듭니다.\n" +" \n" +" <명령>을 비동기 실행합니다. 명령의 표준 출력과 표준 입력은 실행하는 \n" +" 셸에서 배열 변수 <이름>의 색인 0번과 1번에 할당한 파일 서술자와\n" +" 파이프로 연결합니다. 기본 <이름>은 \"COPROC\" 입니다.\n" +" \n" +" 종료 상태:\n" +" coproc 명령이 종료 상태 0을 반환합니다." + +#: builtins.c:1686 +msgid "" +"Define shell function.\n" +" \n" +" Create a shell function named NAME. When invoked as a simple command,\n" +" NAME runs COMMANDs in the calling shell's context. When NAME is invoked,\n" +" the arguments are passed to the function as $1...$n, and the function's\n" +" name is in $FUNCNAME.\n" +" \n" +" Exit Status:\n" +" Returns success unless NAME is readonly." +msgstr "" +"셸 함수를 정의합니다.\n" +" \n" +" <이름>을 가진 셸 함수를 만듭니다. 단순 명령으로 실행할 경우, <이름>은\n" +" 셸 컨텍스트를 호출할 때 <명령>을 실행합니다. <이름>을 실행하면, 함수에\n" +" 전달하는 인자는 $1,...$N 이며, 함수 이름은 $FUNCNAME이 됩니다.\n" +" \n" +" 종료 상태:\n" +" <이름>이 읽기 전용이 아니라면 참을 반환합니다." + +#: builtins.c:1700 +msgid "" +"Group commands as a unit.\n" +" \n" +" Run a set of commands in a group. This is one way to redirect an\n" +" entire set of commands.\n" +" \n" +" Exit Status:\n" +" Returns the status of the last command executed." +msgstr "" +"여러 명령을 단위로 묶습니다.\n" +" \n" +" 여러 명령을 그룹 하나로 묶어 실행합니다. 명령 전체를 방향재지정\n" +" 처리하는 방법 중 하나입니다.\n" +" \n" +" 종료 상태:\n" +" 최종 명령 실행 상태를 반환합니다." + +#: builtins.c:1712 +msgid "" +"Resume job in foreground.\n" +" \n" +" Equivalent to the JOB_SPEC argument to the `fg' command. Resume a\n" +" stopped or background job. JOB_SPEC can specify either a job name\n" +" or a job number. Following JOB_SPEC with a `&' places the job in\n" +" the background, as if the job specification had been supplied as an\n" +" argument to `bg'.\n" +" \n" +" Exit Status:\n" +" Returns the status of the resumed job." +msgstr "" +"포그라운드의 작업을 재개합니다.\n" +" \n" +" `fg' 명령의 JOB_SPEC 인자와 동일합니다. 멈춘 작업 또는 백그라운드\n" +" 작업을 재개합니다. JOB_SPEC은 작업 이름 또는 작업 번호를 지정할 수\n" +" 있습니다. JOB_SPEC 다음에 `&'를 입력하여 백그라운드에서 실행하게\n" +" 합니다. `bg' 인자로 지정할 때처럼 작업 명세를 지정합니다.\n" +" \n" +" 종료 상태:\n" +" 재개한 작업의 상태를 반환합니다." + +#: builtins.c:1727 +msgid "" +"Evaluate arithmetic expression.\n" +" \n" +" The EXPRESSION is evaluated according to the rules for arithmetic\n" +" evaluation. Equivalent to `let \"EXPRESSION\"'.\n" +" \n" +" Exit Status:\n" +" Returns 1 if EXPRESSION evaluates to 0; returns 0 otherwise." +msgstr "" +"산술 연산을 수행합니다.\n" +" \n" +" <표현식>은 산술 연산 규칙에 따라 실행합니다. `let \"<표현식>\"'과 동일합니다.\n" +" \n" +" 종료 상태:\n" +" <표현식> 결과가 0이면 1을 반환하고 그렇지 않으면 0을 반환합니다." + +#: builtins.c:1739 +msgid "" +"Execute conditional command.\n" +" \n" +" Returns a status of 0 or 1 depending on the evaluation of the conditional\n" +" expression EXPRESSION. Expressions are composed of the same primaries used\n" +" by the `test' builtin, and may be combined using the following operators:\n" +" \n" +" ( EXPRESSION )\tReturns the value of EXPRESSION\n" +" ! EXPRESSION\t\tTrue if EXPRESSION is false; else false\n" +" EXPR1 && EXPR2\tTrue if both EXPR1 and EXPR2 are true; else false\n" +" EXPR1 || EXPR2\tTrue if either EXPR1 or EXPR2 is true; else false\n" +" \n" +" When the `==' and `!=' operators are used, the string to the right of\n" +" the operator is used as a pattern and pattern matching is performed.\n" +" When the `=~' operator is used, the string to the right of the operator\n" +" is matched as a regular expression.\n" +" \n" +" The && and || operators do not evaluate EXPR2 if EXPR1 is sufficient to\n" +" determine the expression's value.\n" +" \n" +" Exit Status:\n" +" 0 or 1 depending on value of EXPRESSION." +msgstr "" +"조건 명령을 수행합니다.\n" +" \n" +" <표현식>의 조건문 수행의 처리 결과에 따라 상태값을 0 또는 1로 반환합니다.\n" +" 표현식은 `test' 내장 명령에서 활용하는 동일한 규칙에 따라 작성하며,\n" +" 다음 연산자로 결합합니다:\n" +" ( <표현식> )\t<표현식>의 값을 반환\n" +" ! <표현식>\t\t <표현식> 결과가 거짓이면 참을, 그렇지 않으면 거짓을 반환\n" +" <표현식1> && <표현식2>\t\t<표현식1>과 <표현식2>가 모두 참이면 참을\n" +" \t\t\t\t그렇지 않으면 거짓을 반환\n" +" <표현식1> || <표현식2>\t\t<표현식1> 또는 <표현식2> 둘 중 하나가 참이면 참을\n" +" \t\t\t\t그렇지 않으면 거짓을 반환\n" +" \n" +" `=='과 `!=' 연산자를 사용한다면 우항의 문자열은 패턴으로 활용하며, 패턴 검사를\n" +" 수행합니다. `=~' 연산자를 사용할 때는 우항의 문자열은 정규표현식으로 간주합니다.\n" +" \n" +" && 연산자와 || 연산자는 <표현식1>이 표현식 값을 내는데 충분하다면 <표현식2>를\n" +" 처리하지는 않습니다.\n" +" \n" +" 종료 상태:\n" +" <표현식> 값에 따라 0 또는 1을 반환합니다." + +#: builtins.c:1765 +msgid "" +"Common shell variable names and usage.\n" +" \n" +" BASH_VERSION\tVersion information for this Bash.\n" +" CDPATH\tA colon-separated list of directories to search\n" +" \t\tfor directories given as arguments to `cd'.\n" +" GLOBIGNORE\tA colon-separated list of patterns describing filenames to\n" +" \t\tbe ignored by pathname expansion.\n" +" HISTFILE\tThe name of the file where your command history is stored.\n" +" HISTFILESIZE\tThe maximum number of lines this file can contain.\n" +" HISTSIZE\tThe maximum number of history lines that a running\n" +" \t\tshell can access.\n" +" HOME\tThe complete pathname to your login directory.\n" +" HOSTNAME\tThe name of the current host.\n" +" HOSTTYPE\tThe type of CPU this version of Bash is running under.\n" +" IGNOREEOF\tControls the action of the shell on receipt of an EOF\n" +" \t\tcharacter as the sole input. If set, then the value\n" +" \t\tof it is the number of EOF characters that can be seen\n" +" \t\tin a row on an empty line before the shell will exit\n" +" \t\t(default 10). When unset, EOF signifies the end of input.\n" +" MACHTYPE\tA string describing the current system Bash is running on.\n" +" MAILCHECK\tHow often, in seconds, Bash checks for new mail.\n" +" MAILPATH\tA colon-separated list of filenames which Bash checks\n" +" \t\tfor new mail.\n" +" OSTYPE\tThe version of Unix this version of Bash is running on.\n" +" PATH\tA colon-separated list of directories to search when\n" +" \t\tlooking for commands.\n" +" PROMPT_COMMAND\tA command to be executed before the printing of each\n" +" \t\tprimary prompt.\n" +" PS1\t\tThe primary prompt string.\n" +" PS2\t\tThe secondary prompt string.\n" +" PWD\t\tThe full pathname of the current directory.\n" +" SHELLOPTS\tA colon-separated list of enabled shell options.\n" +" TERM\tThe name of the current terminal type.\n" +" TIMEFORMAT\tThe output format for timing statistics displayed by the\n" +" \t\t`time' reserved word.\n" +" auto_resume\tNon-null means a command word appearing on a line by\n" +" \t\titself is first looked for in the list of currently\n" +" \t\tstopped jobs. If found there, that job is foregrounded.\n" +" \t\tA value of `exact' means that the command word must\n" +" \t\texactly match a command in the list of stopped jobs. A\n" +" \t\tvalue of `substring' means that the command word must\n" +" \t\tmatch a substring of the job. Any other value means that\n" +" \t\tthe command must be a prefix of a stopped job.\n" +" histchars\tCharacters controlling history expansion and quick\n" +" \t\tsubstitution. The first character is the history\n" +" \t\tsubstitution character, usually `!'. The second is\n" +" \t\tthe `quick substitution' character, usually `^'. The\n" +" \t\tthird is the `history comment' character, usually `#'.\n" +" HISTIGNORE\tA colon-separated list of patterns used to decide which\n" +" \t\tcommands should be saved on the history list.\n" +msgstr "" +"일반 셸 변수 이름과 사용법입니다.\n" +" \n" +" BASH_VERSION\t배시 버전 정보입니다.\n" +" CDPATH\t`cd' 인자처럼 디렉터리 검색에 주어지는 콜론으로 구분한\n" +" \t\t디렉터리 목록입니다.\n" +" GLOBIGNORE\t경로 이름을 확장하여 무시할 콜론 이름으로 구분한 파일 이름\n" +" \t\t특징 패턴 목록입니다.\n" +" HISTFILE\t명령을 기록에 저장하는 파일 이름입니다.\n" +" HISTFILESIZE\t파일에 넣을 수 있는 최대 줄 수 입니다.\n" +" HISTSIZE\t동작 중인 셸에서 접근할 수 있는 최대 기록 줄 수 입니다.\n" +" HOME\t로그인 후 접근하는 완전한 경로 이름입니다.\n" +" HOSTNAME\t현재 호스트 이름입니다.\n" +" HOSTTYPE\t이 배시 버전이 실행하고 있는 시스템의 CPU 형식입니다.\n" +" IGNOREEOF\n" +"EOF 문자 입력을 유일한 입력으로 받는 셸의 동작을\n" +" \t\t제어합니다. 설정하면, 이 변수의 값은 셸을 나가기\n" +" \t\t전 빈 줄에 한줄로 나타낼 EOF 문자 수 입니다 (기본 10개).\n" +" \t\t설정을 해제하면, EOF는 입력 끝을 나타냅니다.\n" +" MACHTYPE\t현재 배시를 실행하고 있는 시스템을 설명하는 문자열입니다.\n" +" MAILCHECK\t배시에서 새 메일을 확인하는 초단위 빈도 시간입니다.\n" +" MAILPATH\t배시에서 새 메일을 확인할 콜론 구분 파일 목록입니다.\n" +" OSTYPE\t이 배시 버전을 실행하고 있는 유닉스 버전입니다.\n" +" PATH\t명령을 찾을 때 검색할 콜론 구분 디렉터리 목록입니다.\n" +" PROMPT_COMMAND\t각 기본 프롬프트를 출력하기 전에 실행할\n" +" \t\t명령입니다.\n" +" PS1\t\t기본 프롬프트 문자열입니다.\n" +" PS2\t\t2차 프롬프트 문자열입니다.\n" +" PWD\t\t현재 디렉터리의 전체 경로 이름 입니다.\n" +" SHELLOPTS\t콜론으로 구분한 활성 셸 옵션 목록입니다.\n" +" TERM\t현재 터미널 형식 이름입니다.\n" +" TIMEFORMAT\t`time' 역방향 단어로 표시하는 시간 통계의\n" +" \t\t출력 형식입니다.\n" +" <자동_재개>\tnull 값이 아니라면 자체에서 나타내는 명령행을\n" +" \t\t먼저 나타내고, 현재 멈춘 작업 목록의 첫번째 확인 요소임을\n" +" \t\t의미합니다. 이 상태가 나타나면 작업을 포 그라운드에서\n" +" \t\t실행헙니다. `exact' 값은 명령 단어가 멈춘 작업 목록의\n" +" \t\t명령과 정확히 일치해야 함을 의미합니다.\n" +" \t\t`substring' 값은 명령 단어가 작업의 부분 문자열과\n" +" \t\t일치해야 하는 의미를 담고 있습니다. 다른 값은\n" +" \t\t명령이 멈춘 작업의 접두어여야 하는 의미를 담고 있습니다.\n" +" <기록 문자>\t기록 확장과 빠른 대체를 제어하는 문자입니다.\n" +" \t\t첫번째는 기록 제거 문자로, 보통 `!'을 활용합니다.\n" +" \t\t두번째는 보통 `^'으로 표기하는 `빠른 대체문자' 입니다.\n" +" \t\t세번째는 `기록 주석' 문자로 보통 `#'으로 표기합니다.\n" +" HISTIGNORE\t어떤 명령을 기록 목록에 저장해야 하는지 판단할 때\n" +" \t\t활용하는 콜론 구분 패턴 목록입니다.\n" + +#: builtins.c:1822 +msgid "" +"Add directories to stack.\n" +" \n" +" Adds a directory to the top of the directory stack, or rotates\n" +" the stack, making the new top of the stack the current working\n" +" directory. With no arguments, exchanges the top two directories.\n" +" \n" +" Options:\n" +" -n\tSuppresses the normal change of directory when adding\n" +" \t\tdirectories to the stack, so only the stack is manipulated.\n" +" \n" +" Arguments:\n" +" +N\tRotates the stack so that the Nth directory (counting\n" +" \t\tfrom the left of the list shown by `dirs', starting with\n" +" \t\tzero) is at the top.\n" +" \n" +" -N\tRotates the stack so that the Nth directory (counting\n" +" \t\tfrom the right of the list shown by `dirs', starting with\n" +" \t\tzero) is at the top.\n" +" \n" +" dir\tAdds DIR to the directory stack at the top, making it the\n" +" \t\tnew current working directory.\n" +" \n" +" The `dirs' builtin displays the directory stack.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid argument is supplied or the directory\n" +" change fails." +msgstr "" +"디렉터리를 스택에 추가합니다.\n" +" \n" +" 디렉터리를 디렉터리 스택 상단에 추가하거나, 스택을 돌리거나,\n" +" 스택의 새 상단에 현재 작업 디렉터리를 둡니다. 인자를 지정하지\n" +" 않으면 상단 디렉터리 둘을 바꿉니다.\n" +" \n" +" 옵션:\n" +" -n\t스택에 디렉터리를 추가할 때 디렉터리 일반 변경 동작을\n" +" \t\t막은 상태에서, 스택만 다루게 합니다.\n" +" \n" +" 인자:\n" +" +N\t`dirs' 내장 명령에 나타난 항목을 0부터 시작해서 왼쪽부터\n" +" \t\t세어 N번째 항목을 스택의 최상단에 오도록 회전합니다.\n" +" \n" +" -N\t`dirs' 내장 명령에 나타난 항목을 0부터 시작해서 오른쪽부터\n" +" \t\t세어 N번째 항목을 스택의 최상단에 오도록 회전합니다.\n" +" \n" +" <디렉터리>\t<디렉터리>를 스택 상단에 추가하여 새 현재 작업\n" +" \t\t디렉터리로 지정합니다.\n" +" \n" +" `dirs' 내장 명령은 디렉터리 스택을 표시합니다.\n" +" \n" +" 종료 상태:\n" +" 적절한 인자를 지정하고 디렉터리 변경에 성공하면 성공을 반환\n" +" 합니다." + +#: builtins.c:1856 +msgid "" +"Remove directories from stack.\n" +" \n" +" Removes entries from the directory stack. With no arguments, removes\n" +" the top directory from the stack, and changes to the new top directory.\n" +" \n" +" Options:\n" +" -n\tSuppresses the normal change of directory when removing\n" +" \t\tdirectories from the stack, so only the stack is manipulated.\n" +" \n" +" Arguments:\n" +" +N\tRemoves the Nth entry counting from the left of the list\n" +" \t\tshown by `dirs', starting with zero. For example: `popd +0'\n" +" \t\tremoves the first directory, `popd +1' the second.\n" +" \n" +" -N\tRemoves the Nth entry counting from the right of the list\n" +" \t\tshown by `dirs', starting with zero. For example: `popd -0'\n" +" \t\tremoves the last directory, `popd -1' the next to last.\n" +" \n" +" The `dirs' builtin displays the directory stack.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid argument is supplied or the directory\n" +" change fails." +msgstr "" +"스택에서 디렉터리를 제거합니다.\n" +" \n" +" 디렉터리 스택에서 항목을 제거합니다. 인자를 지정하지 않으면,\n" +" 스택의 상단 디렉터리를 제거하며, 새 상단 디렉터리로 바꿉니다.\n" +" \n" +" 옵션:\n" +" -n\t스택에서 디렉터리를 제거할 때 디렉터리 일반 변경동작을\n" +" \t\t막아 스택만 처리하게합니다.\n" +" \n" +" 인자:\n" +" +N\t0부터 시작해서 `dirs' 내장 명령에 나타난 항목을 왼쪽부터\n" +" \t\t세어 N번째 항목을 제거합니다. 예를 들어 `popd +0' 명령은\n" +" \t\t처음 디렉터리를 `popd +1' 명령은 두번째 디렉터리를\n" +" \t\t제거합니다.\n" +" -N\t0부터 시작해서 `dirs' 내장 명령에 나타난 항목을 오른쪽부터\n" +" \t\t세어 N번째 항목을 제거합니다. 예를 들어 `popd -0' 명령은\n" +" \t\t마지막 디렉터리를 `popd -1' 명령은 마지막에서 두번째의\n" +" \t\t디렉터리를 제거합니다.\n" +" \n" +" `dirs' 내장 명령은 디렉터리 스택을 보여줍니다.\n" +" \n" +" 종료 상태:\n" +" 적절한 인자를 지정했거나 디렉터리를 제대로 이동했다면\n" +" 성공을 반환합니다.전" + +#: builtins.c:1886 +msgid "" +"Display directory stack.\n" +" \n" +" Display the list of currently remembered directories. Directories\n" +" find their way onto the list with the `pushd' command; you can get\n" +" back up through the list with the `popd' command.\n" +" \n" +" Options:\n" +" -c\tclear the directory stack by deleting all of the elements\n" +" -l\tdo not print tilde-prefixed versions of directories relative\n" +" \t\tto your home directory\n" +" -p\tprint the directory stack with one entry per line\n" +" -v\tprint the directory stack with one entry per line prefixed\n" +" \t\twith its position in the stack\n" +" \n" +" Arguments:\n" +" +N\tDisplays the Nth entry counting from the left of the list\n" +" \t\tshown by dirs when invoked without options, starting with\n" +" \t\tzero.\n" +" \n" +" -N\tDisplays the Nth entry counting from the right of the list\n" +" \t\tshown by dirs when invoked without options, starting with\n" +" \t\tzero.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid option is supplied or an error occurs." +msgstr "" +"디렉터리 스택을 표시합니다.\n" +" \n" +" 현재 기억한 디렉터리 목록을 보여줍니다. 디렉터리는\n" +" `pushd' 명령으로 목록에 경로를 저장할 수 있고, 'popd' \n" +" 명령으로 거슬러 올라갈 수 있습니다.\n" +" \n" +" 옵션:\n" +" -c\t원소를 전부 삭제함으로써 디렉터리 스택을 초기화합니다\n" +" -l\t홈 디렉터리까지 ~로 축약된 상대경로를 표시하지 않습니다\n" +" -p\t한 줄에 하나씩 디렉터리 스택을 표시합니다\n" +" -v\t한 줄에 하나씩 스택의 위치 및 디렉터리 스택을 표시합니다\n" +" \n" +" 인자:\n" +" +N\t인자 없이 실행될 때 보여지는 목록의 왼쪽부터 N번째 항목을 보여줍니다.\n" +" \t세는 수는 0부터 시작합니다.\n" +" \n" +" -N\t인자 없이 실행될 때 보여지는 목록의 오른쪽부터 N번째 항목을 보여줍니다.\n" +"\t세는 수는 0부터 시작합니다.\n" +" 종료 상태:\n" +" 부적절한 옵션이 주어지거나 오류가 발생하지 않는다면 성공을 반환합니다." + +#: builtins.c:1917 +msgid "" +"Set and unset shell options.\n" +" \n" +" Change the setting of each shell option OPTNAME. Without any option\n" +" arguments, list each supplied OPTNAME, or all shell options if no\n" +" OPTNAMEs are given, with an indication of whether or not each is set.\n" +" \n" +" Options:\n" +" -o\trestrict OPTNAMEs to those defined for use with `set -o'\n" +" -p\tprint each shell option with an indication of its status\n" +" -q\tsuppress output\n" +" -s\tenable (set) each OPTNAME\n" +" -u\tdisable (unset) each OPTNAME\n" +" \n" +" Exit Status:\n" +" Returns success if OPTNAME is enabled; fails if an invalid option is\n" +" given or OPTNAME is disabled." +msgstr "" +"셸 옵션을 설정 또는 해제합니다.\n" +" \n" +" <옵션이름> 셸 옵션의 설정을 바꿉니다. 어떤 옵션 인자도 지정하지 않으면\n" +" <옵션이름>에 지정한 항목을 보여주거나, <옵션이름>이 없을 경우 모든\n" +" 셸 옵션을 보여주든지 설정 여부를 함께 나타냅니다.\n" +" \n" +" 옵션:\n" +" -o\t`set -o'로 지정한 <옵션이름>으로 제한합니다\n" +" -p\t각 셸 옵션과 상태를 출력합니다\n" +" -q\t출력을 끕니다\n" +" -s\t각 <옵션이름>을 사용합니다 (설정)\n" +" -u\t각 <옵션이름>을 사용하지 않습니다 (설정해제)\n" +" \n" +" 종료 상태:\n" +" <옵션이름>을 활성화했다면 성공을 반환합니다. 부적절한 옵션을\n" +" 지정했거나 <옵션이름>을 사용하지 않으면 실패를 반환합니다." + +#: builtins.c:1938 +msgid "" +"Formats and prints ARGUMENTS under control of the FORMAT.\n" +" \n" +" Options:\n" +" -v var\tassign the output to shell variable VAR rather than\n" +" \t\tdisplay it on the standard output\n" +" \n" +" FORMAT is a character string which contains three types of objects: plain\n" +" characters, which are simply copied to standard output; character escape\n" +" sequences, which are converted and copied to the standard output; and\n" +" format specifications, each of which causes printing of the next successive\n" +" argument.\n" +" \n" +" In addition to the standard format specifications described in printf(1),\n" +" printf interprets:\n" +" \n" +" %b\texpand backslash escape sequences in the corresponding argument\n" +" %q\tquote the argument in a way that can be reused as shell input\n" +" %Q\tlike %q, but apply any precision to the unquoted argument before\n" +" \t\tquoting\n" +" %(fmt)T\toutput the date-time string resulting from using FMT as a format\n" +" \t string for strftime(3)\n" +" \n" +" The format is re-used as necessary to consume all of the arguments. If\n" +" there are fewer arguments than the format requires, extra format\n" +" specifications behave as if a zero value or null string, as appropriate,\n" +" had been supplied.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid option is given or a write or assignment\n" +" error occurs." +msgstr "" +"<형식>에 따라 <인자>를 구성하고 출력합니다.\n" +" \n" +" 옵션:\n" +" -v <변수>\t표준 출력에 나타내는 대신 셸 <변수>에 할당합니다.\n" +" \n" +" <형식>은 세가지 형식의 객체가 들어간 문자열입니다. 표준 출력에 그냥\n" +" 복사하는 일반 문자, 표준 출력에 변환하여 복사하는 문자 이스케이핑 시퀀스,\n" +" 그리고 다음 뒤따라오는 인자를 형식에 맞춰 출력하는 형식 지정자가 바로\n" +" 세가지 형식 입니다.\n" +" \n" +" 게다가 printf(1)에 표준 형식 지정자에서 printf는 다음과 같이 해석합니다:\n" +" \n" +" %b\t관련 인자의 백슬래시 이스케이프 시퀀스를 확장합니다\n" +" %q\t셸 입력으로 다시 사용할 수 있도록 변수를 따옴표 처리합니다\n" +" %Q\t%q와 비슷하지만, 따옴표 처리하기 전의 인자에 정빌도를 적용합니다\n" +" %(fmt)T\tstrftime(3)의 형식 문자열로 <형식>을 사용하도록 날짜-시간\n" +" \t 문자열을 출력합니다\n" +" \n" +" 형식은 모든 인자에 대해 필요한대로 재활용합니다. 필요한 형식보다\n" +" 적은 인자를 지정했다면, 추가 형식 지정 부분에 대해 적당하게 널 문자열\n" +" 이 들어간 것처럼 처리해줍니다.\n" +" \n" +" 종료 상태:\n" +" 적절한 옵션을 설정했거나 기록, 할당 오류가 나타나지 않으면 성공을\n" +" 반환합니다." + +#: builtins.c:1974 +msgid "" +"Specify how arguments are to be completed by Readline.\n" +" \n" +" For each NAME, specify how arguments are to be completed. If no options\n" +" are supplied, existing completion specifications are printed in a way that\n" +" allows them to be reused as input.\n" +" \n" +" Options:\n" +" -p\tprint existing completion specifications in a reusable format\n" +" -r\tremove a completion specification for each NAME, or, if no\n" +" \t\tNAMEs are supplied, all completion specifications\n" +" -D\tapply the completions and actions as the default for commands\n" +" \t\twithout any specific completion defined\n" +" -E\tapply the completions and actions to \"empty\" commands --\n" +" \t\tcompletion attempted on a blank line\n" +" -I\tapply the completions and actions to the initial (usually the\n" +" \t\tcommand) word\n" +" \n" +" When completion is attempted, the actions are applied in the order the\n" +" uppercase-letter options are listed above. If multiple options are supplied,\n" +" the -D option takes precedence over -E, and both take precedence over -I.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid option is supplied or an error occurs." +msgstr "" +"readline에서 인자를 어떻게 완성 처리할 지 지정합니다.\n" +" \n" +" 각 <이름>에 대해 인자를 어떻게 완성할 지 지정합니다. 옵션을 지정하지\n" +" 않으면, 입력할 때 다시 활용할 수 있게 하는 방식으로 기존 완성 명세를\n" +" 출력합니다.\n" +" \n" +" 옵션:\n" +" -p\t기존 완성 명세를 재사용 형식으로 출력합니다\n" +" -r\t각 <이름>별 완성 명세를 제거하거나, <이름>을 지정하지 않았다면\n" +" \t\t모든 완성 명세를 제거합니다\n" +" -D\t어떤 개별 완성 명세 없이 명령에 대해 기본 완성 명세와 동작을\n" +" \t\t적용합니다\n" +" -E\t\"빈\" 명령에 대해 완성 명세와 동작을 적용합니다 -- 빈 줄 상태에서\n" +" \t\t완성 동작을 시도합니다\n" +" -I\t초기 단어(보통 명령) 완성 명세와 동작을 적용합니다\n" +" \n" +" 완성 동작을 시도할 때 상단에 대문자 옵션 순서대로 동작을 적용합니다. 여러\n" +" 옵션을 지정하면 -D 옵션은 -E 옵션보다 우선하며, 두 옵션은 -I 옵션보다\n" +" 우선합니다.\n" +" \n" +" 종료 상태:\n" +" 적절한 옵션을 지정했거나 오류가 발생하지 않으면 성공을 반환합니다." + +#: builtins.c:2004 +msgid "" +"Display possible completions depending on the options.\n" +" \n" +" Intended to be used from within a shell function generating possible\n" +" completions. If the optional WORD argument is supplied, matches against\n" +" WORD are generated.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid option is supplied or an error occurs." +msgstr "" +"옵션에 따라 가능한 완성 명세를 표시합니다.\n" +" \n" +" 가능한 완성 명세를 만드는 셸 함수에서 사용하도록 의도했습니다.\n" +" 추가 <단어> 인자를 지정하면, <단어>에 일치하는 항목을 만듭니다.\n" +" \n" +" 종료 상태:\n" +" 적절한 옵션을 지정했거나 오류가 없으면 성공을 반환합니다." + +#: builtins.c:2019 +msgid "" +"Modify or display completion options.\n" +" \n" +" Modify the completion options for each NAME, or, if no NAMEs are supplied,\n" +" the completion currently being executed. If no OPTIONs are given, print\n" +" the completion options for each NAME or the current completion specification.\n" +" \n" +" Options:\n" +" \t-o option\tSet completion option OPTION for each NAME\n" +" \t-D\t\tChange options for the \"default\" command completion\n" +" \t-E\t\tChange options for the \"empty\" command completion\n" +" \t-I\t\tChange options for completion on the initial word\n" +" \n" +" Using `+o' instead of `-o' turns off the specified option.\n" +" \n" +" Arguments:\n" +" \n" +" Each NAME refers to a command for which a completion specification must\n" +" have previously been defined using the `complete' builtin. If no NAMEs\n" +" are supplied, compopt must be called by a function currently generating\n" +" completions, and the options for that currently-executing completion\n" +" generator are modified.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid option is supplied or NAME does not\n" +" have a completion specification defined." +msgstr "" +"자동 완성 옵션을 수정하거나 표시합니다.\n" +"\n" +" 각 <이름> 별로 자동 완성 옵션을 수정하거나, 지정 <이름>이 없다면,\n" +" 현재 실행하는 명령의 자동완성 옵션을 수정합니다. 주어진 <옵션>이 없다면\n" +" 각 <이름> 별 자동 완성 옵션을 출력하거나 현재 자동 완성 명세를 출력합니다.\n" +" \n" +" 옵션:\n" +" \t-o <옵션>\t각 <이름>별 <옵션>을 설정합니다\n" +" \t-D\t\t\"기본\" 명령 자동 완성 옵션을 바꿉니다\n" +" \t-E\t\t\"빈\" 명령 자동 완성 옵션을 바꿉니다\n" +" \t-I\t\t초기 단어의 자동 완성 옵션을 바꿉니다\n" +" \n" +" 지정 옵션을 끄는 `-o' 대신 `+o'를 사용하십시오.\n" +" \n" +" 인자:\n" +" \n" +" 각 <이름>은 `complete' 내장 명령으로 앞서 지정해야 하는 자동 완성\n" +" 명세 명령을 참조합니다. <이름>이 없다면 현재 자동 완성 규칙을 생성하는\n" +" compopt를 호출해야 하며, 현재 실행하는 자동 완성 생성자의 옵션도\n" +" 역시 마찬가지로 수정해야합니다.\n" +" \n" +" 종료 상태:\n" +" 부적절한 옵션을 지정하지 않았거나 <이름>에 자동 완성 명세를 지정했다면\n" +" 성공을 반환합니다." + +#: builtins.c:2050 +msgid "" +"Read lines from the standard input into an indexed array variable.\n" +" \n" +" Read lines from the standard input into the indexed array variable ARRAY, or\n" +" from file descriptor FD if the -u option is supplied. The variable MAPFILE\n" +" is the default ARRAY.\n" +" \n" +" Options:\n" +" -d delim\tUse DELIM to terminate lines, instead of newline\n" +" -n count\tCopy at most COUNT lines. If COUNT is 0, all lines are copied\n" +" -O origin\tBegin assigning to ARRAY at index ORIGIN. The default index is 0\n" +" -s count\tDiscard the first COUNT lines read\n" +" -t\tRemove a trailing DELIM from each line read (default newline)\n" +" -u fd\tRead lines from file descriptor FD instead of the standard input\n" +" -C callback\tEvaluate CALLBACK each time QUANTUM lines are read\n" +" -c quantum\tSpecify the number of lines read between each call to\n" +" \t\t\tCALLBACK\n" +" \n" +" Arguments:\n" +" ARRAY\tArray variable name to use for file data\n" +" \n" +" If -C is supplied without -c, the default quantum is 5000. When\n" +" CALLBACK is evaluated, it is supplied the index of the next array\n" +" element to be assigned and the line to be assigned to that element\n" +" as additional arguments.\n" +" \n" +" If not supplied with an explicit origin, mapfile will clear ARRAY before\n" +" assigning to it.\n" +" \n" +" Exit Status:\n" +" Returns success unless an invalid option is given or ARRAY is readonly or\n" +" not an indexed array." +msgstr "" +"표준 입력을 읽어 색인 배열 변수에 대입합니다.\n" +" \n" +" 표준 입력에서 행을 읽어 색인 <배열> 변수에 넣거나 -u 옵션을 지정하여\n" +" <파일서술자>에서 행을 읽어 색인 <배열> 변수에 넣습니다. <매핑파일>\n" +" 변수는 기본적으로 <배열> 취급합니다.\n" +" \n" +" 옵션:\n" +" -d <구분자>\t개행 문자 대신 <구분자>로 행을 끊습니다.\n" +" -n <갯수>\t\t<갯수>만큼 행을 읽습니다. <갯수> 값이 0이면\n" +" \t\t 모든 행을 복사합니다.\n" +" -O <시작>\t\t<시작> 인덱스에 <배열> 할당을 시작합니다.\n" +" \t\t기본 인덱스는 0 입니다.\n" +" -s <갯수>\t\t처음 <갯수>만큼 읽은 행을 무시합니다\n" +" -t\t\t읽은 각 행 끝에 뒤다라오는 <구분자>를 제거합니다\n" +" \t\t(기본 값은 개행 문자)\n" +" -u <파일서술자>\t표준 입력 대신 <파일서술자>에서 행을 읽습니다\n" +" -C <콜백>\t\t<양자> 행을 읽을 때마다 실행할 <콜백> 입니다\n" +" -c <양자>\t\t<콜백>을 실행할 때마다 읽을 행 갯수를 지정합니다\n" +" \n" +" 인자:\n" +" <배열>\t파일 데이터에 활용할 배열 변수 이름\n" +" \n" +" -c 옵션 없이 -C를 지정하면, 기본 양자 수는 5000입니다. <콜백>을\n" +" 실행하면, 다음 배열 요소의 색인 번호를 할당하고, 해당 요소에 할당할 행을\n" +" 추가 인자로 지정합니다.\n" +" \n" +" <시작> 색인 번호를 제대로 지정하지 않으면, mapfile에서 <배열>에\n" +" 할당하기 전에 <배열>값을 삭제합니다.\n" +" \n" +" 종료 상태:\n" +" 부적절한 옵션을 주지 않았거나 <배열>을 읽기 전용으로 두지 않았거나\n" +" 색인 배열로 올바르게 지정했다면 성공을 반환합니다." + +#: builtins.c:2086 +msgid "" +"Read lines from a file into an array variable.\n" +" \n" +" A synonym for `mapfile'." +msgstr "" +"파일에서 줄을 읽어 배열 변수에 넣습니다.\n" +" \n" +" `mapfile'의 동의어." -- cgit v1.2.3