diff options
Diffstat (limited to 'doc/arm')
66 files changed, 16917 insertions, 0 deletions
diff --git a/doc/arm/Makefile.am b/doc/arm/Makefile.am new file mode 100644 index 0000000..3d16b6c --- /dev/null +++ b/doc/arm/Makefile.am @@ -0,0 +1,120 @@ +include $(top_srcdir)/Makefile.top +include $(top_srcdir)/Makefile.docs + +EXTRA_DIST = \ + advanced.inc.rst \ + build.inc.rst \ + catz.inc.rst \ + chapter10.rst \ + chapter1.rst \ + chapter2.rst \ + chapter3.rst \ + chapter4.rst \ + chapter5.rst \ + chapter6.rst \ + chapter7.rst \ + chapter9.rst \ + config-auth.inc.rst \ + config-intro.inc.rst \ + config-resolve.inc.rst \ + conf.py \ + dlz.inc.rst \ + dns-ops.inc.rst \ + dnssec-guide.rst \ + dnssec.inc.rst \ + dns-security-overview.dia \ + dns-security-overview.png \ + dns-servers.dia \ + dns-servers.png \ + dns-tree.dia \ + dns-tree.png \ + dyndb.inc.rst \ + general.rst \ + history.rst \ + index.rst \ + intro-dns-bind.inc.rst \ + introduction.inc.rst \ + intro-security.inc.rst \ + isc-logo.pdf \ + logging-categories.inc.rst \ + managed-keys.inc.rst \ + manpages.rst \ + name-resolution.dia \ + name-resolution.png \ + notes.rst \ + pkcs11.inc.rst \ + platforms.inc.rst \ + plugins.inc.rst \ + primary-secondary.dia \ + primary-secondary.png \ + recursive-query.dia \ + recursive-query.png \ + reference.rst \ + requirements.inc.rst \ + requirements.txt \ + resolver-forward.dia \ + resolver-forward.png \ + rpz.inc.rst \ + security.inc.rst \ + sig0.inc.rst \ + tkey.inc.rst \ + troubleshooting.inc.rst \ + tsig.inc.rst \ + zones.inc.rst \ + _ext/iscconf.py \ + _ext/mergegrammar.py \ + _ext/namedconf.py \ + _ext/rndcconf.py \ + _static/custom.css \ + ../dnssec-guide \ + ../misc/options \ + ../misc/rndc.grammar \ + ../misc/delegation-only.zoneopt \ + ../misc/forward.zoneopt \ + ../misc/hint.zoneopt \ + ../misc/in-view.zoneopt \ + ../misc/mirror.zoneopt \ + ../misc/primary.zoneopt \ + ../misc/redirect.zoneopt \ + ../misc/secondary.zoneopt \ + ../misc/static-stub.zoneopt \ + ../misc/stub.zoneopt \ + ../notes/*.rst + +html-local: + $(AM_V_SPHINX)$(SPHINX_BUILD) -b html -d $(SPHINXBUILDDIR)/.doctrees/html $(ALLSPHINXOPTS) $(SPHINXBUILDDIR)/html + +install-html-local: + $(INSTALL) -d $(DESTDIR)/$(docdir) $(DESTDIR)/$(docdir)/_static + $(INSTALL) -D $(SPHINXBUILDDIR)/html/*.html $(DESTDIR)/$(docdir)/ + cp -R $(SPHINXBUILDDIR)/html/_static/ $(DESTDIR)/$(docdir)/_static/ + +singlehtml: + $(AM_V_SPHINX)$(SPHINX_BUILD) -b singlehtml -d $(SPHINXBUILDDIR)/.doctrees/singlehtml $(ALLSPHINXOPTS) $(SPHINXBUILDDIR)/singlehtml + +install-singlehtml: singlehtml + $(INSTALL) -d $(DESTDIR)/$(docdir) $(DESTDIR)/$(docdir)/_static + $(INSTALL_DATA) $(SPHINXBUILDDIR)/singlehtml/*.html $(DESTDIR)/$(docdir)/ + cp -R $(SPHINXBUILDDIR)/singlehtml/_static/* $(DESTDIR)/$(docdir)/_static/ + +epub: + $(AM_V_SPHINX)$(SPHINX_BUILD) -b epub -d $(SPHINXBUILDDIR)/.doctrees/epub $(ALLSPHINXOPTS) $(SPHINXBUILDDIR)/epub + +install-epub: + $(INSTALL) -d $(DESTDIR)/$(docdir) + $(INSTALL_DATA) $(SPHINXBUILDDIR)/epub/*.epub $(DESTDIR)/$(docdir)/ + +if HAVE_XELATEX +pdf-local: + $(AM_V_SPHINX)$(SPHINX_BUILD) -b latex -d $(SPHINXBUILDDIR)/.doctrees/latex $(ALLSPHINXOPTS) $(SPHINXBUILDDIR)/latex + $(MAKE) -C $(SPHINXBUILDDIR)/latex all-pdf + +install-pdf-local: + $(INSTALL) -d $(DESTDIR)/$(docdir) + $(INSTALL_DATA) $(SPHINXBUILDDIR)/latex/*.pdf $(DESTDIR)/$(docdir)/ +endif + +clean-local: + -rm -rf $(SPHINXBUILDDIR) + +doc-local: html singlehtml pdf epub diff --git a/doc/arm/Makefile.in b/doc/arm/Makefile.in new file mode 100644 index 0000000..0626f95 --- /dev/null +++ b/doc/arm/Makefile.in @@ -0,0 +1,794 @@ +# Makefile.in generated by automake 1.16.5 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2021 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Hey Emacs, this is -*- makefile-automake -*- file! +# vim: filetype=automake +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +target_triplet = @target@ +@HOST_MACOS_TRUE@am__append_1 = \ +@HOST_MACOS_TRUE@ -Wl,-flat_namespace + +subdir = doc/arm +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_compile_flag.m4 \ + $(top_srcdir)/m4/ax_check_link_flag.m4 \ + $(top_srcdir)/m4/ax_check_openssl.m4 \ + $(top_srcdir)/m4/ax_gcc_func_attribute.m4 \ + $(top_srcdir)/m4/ax_jemalloc.m4 \ + $(top_srcdir)/m4/ax_lib_lmdb.m4 \ + $(top_srcdir)/m4/ax_perl_module.m4 \ + $(top_srcdir)/m4/ax_posix_shell.m4 \ + $(top_srcdir)/m4/ax_prog_cc_for_build.m4 \ + $(top_srcdir)/m4/ax_pthread.m4 \ + $(top_srcdir)/m4/ax_python_module.m4 \ + $(top_srcdir)/m4/ax_restore_flags.m4 \ + $(top_srcdir)/m4/ax_save_flags.m4 $(top_srcdir)/m4/ax_tls.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__extra_recursive_targets = test-recursive unit-recursive \ + doc-recursive +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/Makefile.docs \ + $(top_srcdir)/Makefile.top +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BUILD_EXEEXT = @BUILD_EXEEXT@ +BUILD_OBJEXT = @BUILD_OBJEXT@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CC_FOR_BUILD = @CC_FOR_BUILD@ +CFLAGS = @CFLAGS@ +CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@ +CMOCKA_CFLAGS = @CMOCKA_CFLAGS@ +CMOCKA_LIBS = @CMOCKA_LIBS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CPPFLAGS_FOR_BUILD = @CPPFLAGS_FOR_BUILD@ +CPP_FOR_BUILD = @CPP_FOR_BUILD@ +CSCOPE = @CSCOPE@ +CTAGS = @CTAGS@ +CURL = @CURL@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DEVELOPER_MODE = @DEVELOPER_MODE@ +DLLTOOL = @DLLTOOL@ +DNSTAP_CFLAGS = @DNSTAP_CFLAGS@ +DNSTAP_LIBS = @DNSTAP_LIBS@ +DOXYGEN = @DOXYGEN@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +ETAGS = @ETAGS@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +FILECMD = @FILECMD@ +FSTRM_CAPTURE = @FSTRM_CAPTURE@ +FUZZ_LDFLAGS = @FUZZ_LDFLAGS@ +FUZZ_LOG_COMPILER = @FUZZ_LOG_COMPILER@ +GREP = @GREP@ +GSSAPI_CFLAGS = @GSSAPI_CFLAGS@ +GSSAPI_LIBS = @GSSAPI_LIBS@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +JEMALLOC_CFLAGS = @JEMALLOC_CFLAGS@ +JEMALLOC_LIBS = @JEMALLOC_LIBS@ +JSON_C_CFLAGS = @JSON_C_CFLAGS@ +JSON_C_LIBS = @JSON_C_LIBS@ +KRB5_CFLAGS = @KRB5_CFLAGS@ +KRB5_CONFIG = @KRB5_CONFIG@ +KRB5_LIBS = @KRB5_LIBS@ +LATEXMK = @LATEXMK@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@ +LIBCAP_LIBS = @LIBCAP_LIBS@ +LIBIDN2_CFLAGS = @LIBIDN2_CFLAGS@ +LIBIDN2_LIBS = @LIBIDN2_LIBS@ +LIBNGHTTP2_CFLAGS = @LIBNGHTTP2_CFLAGS@ +LIBNGHTTP2_LIBS = @LIBNGHTTP2_LIBS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIBUV_CFLAGS = @LIBUV_CFLAGS@ +LIBUV_LIBS = @LIBUV_LIBS@ +LIBXML2_CFLAGS = @LIBXML2_CFLAGS@ +LIBXML2_LIBS = @LIBXML2_LIBS@ +LIPO = @LIPO@ +LMDB_CFLAGS = @LMDB_CFLAGS@ +LMDB_LIBS = @LMDB_LIBS@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MAXMINDDB_CFLAGS = @MAXMINDDB_CFLAGS@ +MAXMINDDB_LIBS = @MAXMINDDB_LIBS@ +MAXMINDDB_PREFIX = @MAXMINDDB_PREFIX@ +MKDIR_P = @MKDIR_P@ +NC = @NC@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OPENSSL_CFLAGS = @OPENSSL_CFLAGS@ +OPENSSL_LDFLAGS = @OPENSSL_LDFLAGS@ +OPENSSL_LIBS = @OPENSSL_LIBS@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PERL = @PERL@ +PKG_CONFIG = @PKG_CONFIG@ +PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ +PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ +PROTOC_C = @PROTOC_C@ +PTHREAD_CC = @PTHREAD_CC@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_CXX = @PTHREAD_CXX@ +PTHREAD_LIBS = @PTHREAD_LIBS@ +PYTEST = @PYTEST@ +PYTHON = @PYTHON@ +PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ +PYTHON_PLATFORM = @PYTHON_PLATFORM@ +PYTHON_PREFIX = @PYTHON_PREFIX@ +PYTHON_VERSION = @PYTHON_VERSION@ +RANLIB = @RANLIB@ +READLINE_CFLAGS = @READLINE_CFLAGS@ +READLINE_LIBS = @READLINE_LIBS@ +RELEASE_DATE = @RELEASE_DATE@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +SPHINX_BUILD = @SPHINX_BUILD@ +STD_CFLAGS = @STD_CFLAGS@ +STD_CPPFLAGS = @STD_CPPFLAGS@ +STD_LDFLAGS = @STD_LDFLAGS@ +STRIP = @STRIP@ +TEST_CFLAGS = @TEST_CFLAGS@ +VERSION = @VERSION@ +XELATEX = @XELATEX@ +XSLTPROC = @XSLTPROC@ +ZLIB_CFLAGS = @ZLIB_CFLAGS@ +ZLIB_LIBS = @ZLIB_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CC_FOR_BUILD = @ac_ct_CC_FOR_BUILD@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +ax_pthread_config = @ax_pthread_config@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +pkgpyexecdir = @pkgpyexecdir@ +pkgpythondir = @pkgpythondir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +pyexecdir = @pyexecdir@ +pythondir = @pythondir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target = @target@ +target_alias = @target_alias@ +target_cpu = @target_cpu@ +target_os = @target_os@ +target_vendor = @target_vendor@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +ACLOCAL_AMFLAGS = -I $(top_srcdir)/m4 +AM_CFLAGS = \ + $(STD_CFLAGS) + +AM_CPPFLAGS = \ + $(STD_CPPFLAGS) \ + -include $(top_builddir)/config.h \ + -I$(srcdir)/include + +AM_LDFLAGS = $(STD_LDFLAGS) $(am__append_1) +LDADD = +LIBISC_CFLAGS = \ + -I$(top_srcdir)/include \ + -I$(top_srcdir)/lib/isc/include \ + -I$(top_builddir)/lib/isc/include + +LIBISC_LIBS = $(top_builddir)/lib/isc/libisc.la +LIBDNS_CFLAGS = \ + -I$(top_srcdir)/lib/dns/include \ + -I$(top_builddir)/lib/dns/include + +LIBDNS_LIBS = \ + $(top_builddir)/lib/dns/libdns.la + +LIBNS_CFLAGS = \ + -I$(top_srcdir)/lib/ns/include + +LIBNS_LIBS = \ + $(top_builddir)/lib/ns/libns.la + +LIBIRS_CFLAGS = \ + -I$(top_srcdir)/lib/irs/include + +LIBIRS_LIBS = \ + $(top_builddir)/lib/irs/libirs.la + +LIBISCCFG_CFLAGS = \ + -I$(top_srcdir)/lib/isccfg/include + +LIBISCCFG_LIBS = \ + $(top_builddir)/lib/isccfg/libisccfg.la + +LIBISCCC_CFLAGS = \ + -I$(top_srcdir)/lib/isccc/include/ + +LIBISCCC_LIBS = \ + $(top_builddir)/lib/isccc/libisccc.la + +LIBBIND9_CFLAGS = \ + -I$(top_srcdir)/lib/bind9/include + +LIBBIND9_LIBS = \ + $(top_builddir)/lib/bind9/libbind9.la + +SPHINX_V = $(SPHINX_V_@AM_V@) +SPHINX_V_ = $(SPHINX_V_@AM_DEFAULT_V@) +SPHINX_V_0 = -q +SPHINX_V_1 = -n +SPHINX_W = -W +AM_V_SPHINX = $(AM_V_SPHINX_@AM_V@) +AM_V_SPHINX_ = $(AM_V_SPHINX_@AM_DEFAULT_V@) +AM_V_SPHINX_0 = @echo " SPHINX $@"; +SPHINXBUILDDIR = $(builddir)/_build +LF = \n +RNDC_CONF = .. |rndc_conf| replace:: ``$(sysconfdir)/rndc.conf`` +RNDC_KEY = .. |rndc_key| replace:: ``$(sysconfdir)/rndc.key`` +NAMED_CONF = .. |named_conf| replace:: ``$(sysconfdir)/named.conf`` +BIND_KEYS = .. |bind_keys| replace:: ``$(sysconfdir)/bind.keys`` +NAMED_PID = .. |named_pid| replace:: ``$(runstatedir)/named.pid`` +SESSION_KEY = .. |session_key| replace:: ``$(runstatedir)/session.key`` +common_SPHINXOPTS = \ + $(SPHINX_W) \ + -c $(srcdir) \ + -a \ + $(SPHINX_V) + + +# The "today" variable set below is not directly used in the ARM, but its value +# is implicitly inserted on the title page of the PDF file produced by Sphinx. +ALLSPHINXOPTS = \ + $(common_SPHINXOPTS) \ + -D today="$(RELEASE_DATE)" \ + -D rst_epilog="$$(printf "$${RST_EPILOG}")" \ + $(SPHINXOPTS) \ + $(srcdir) + +_ = @ +man_RNDC_CONF = .. |rndc_conf| replace:: ``$(_)sysconfdir$(_)/rndc.conf`` +man_RNDC_KEY = .. |rndc_key| replace:: ``$(_)sysconfdir$(_)/rndc.key`` +man_NAMED_CONF = .. |named_conf| replace:: ``$(_)sysconfdir$(_)/named.conf`` +man_BIND_KEYS = .. |bind_keys| replace:: ``$(_)sysconfdir$(_)/bind.keys`` +man_NAMED_PID = .. |named_pid| replace:: ``$(_)runstatedir$(_)/named.pid`` +man_SESSION_KEY = .. |session_key| replace:: ``$(_)runstatedir$(_)/session.key`` +man_SPHINXOPTS = \ + $(common_SPHINXOPTS) \ + -D version="@""PACKAGE_VERSION@" \ + -D today="@""RELEASE_DATE@" \ + -D release="@""PACKAGE_VERSION@" \ + -D rst_epilog="$$(printf "$${man_RST_EPILOG}")" \ + $(SPHINXOPTS) \ + $(srcdir) + +AM_V_SED = $(AM_V_SED_@AM_V@) +AM_V_SED_ = $(AM_V_SED_@AM_DEFAULT_V@) +AM_V_SED_0 = @echo " SED $@"; +AM_V_CFG_TEST = $(AM_V_CFG_TEST_@AM_V@) +AM_V_CFG_TEST_ = $(AM_V_CFG_TEST_@AM_DEFAULT_V@) +AM_V_CFG_TEST_0 = @echo " CFG_GEN $@"; +EXTRA_DIST = \ + advanced.inc.rst \ + build.inc.rst \ + catz.inc.rst \ + chapter10.rst \ + chapter1.rst \ + chapter2.rst \ + chapter3.rst \ + chapter4.rst \ + chapter5.rst \ + chapter6.rst \ + chapter7.rst \ + chapter9.rst \ + config-auth.inc.rst \ + config-intro.inc.rst \ + config-resolve.inc.rst \ + conf.py \ + dlz.inc.rst \ + dns-ops.inc.rst \ + dnssec-guide.rst \ + dnssec.inc.rst \ + dns-security-overview.dia \ + dns-security-overview.png \ + dns-servers.dia \ + dns-servers.png \ + dns-tree.dia \ + dns-tree.png \ + dyndb.inc.rst \ + general.rst \ + history.rst \ + index.rst \ + intro-dns-bind.inc.rst \ + introduction.inc.rst \ + intro-security.inc.rst \ + isc-logo.pdf \ + logging-categories.inc.rst \ + managed-keys.inc.rst \ + manpages.rst \ + name-resolution.dia \ + name-resolution.png \ + notes.rst \ + pkcs11.inc.rst \ + platforms.inc.rst \ + plugins.inc.rst \ + primary-secondary.dia \ + primary-secondary.png \ + recursive-query.dia \ + recursive-query.png \ + reference.rst \ + requirements.inc.rst \ + requirements.txt \ + resolver-forward.dia \ + resolver-forward.png \ + rpz.inc.rst \ + security.inc.rst \ + sig0.inc.rst \ + tkey.inc.rst \ + troubleshooting.inc.rst \ + tsig.inc.rst \ + zones.inc.rst \ + _ext/iscconf.py \ + _ext/mergegrammar.py \ + _ext/namedconf.py \ + _ext/rndcconf.py \ + _static/custom.css \ + ../dnssec-guide \ + ../misc/options \ + ../misc/rndc.grammar \ + ../misc/delegation-only.zoneopt \ + ../misc/forward.zoneopt \ + ../misc/hint.zoneopt \ + ../misc/in-view.zoneopt \ + ../misc/mirror.zoneopt \ + ../misc/primary.zoneopt \ + ../misc/redirect.zoneopt \ + ../misc/secondary.zoneopt \ + ../misc/static-stub.zoneopt \ + ../misc/stub.zoneopt \ + ../notes/*.rst + +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/Makefile.top $(top_srcdir)/Makefile.docs $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/arm/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/arm/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ + esac; +$(top_srcdir)/Makefile.top $(top_srcdir)/Makefile.docs $(am__empty): + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +test-local: +unit-local: +doc-local: +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: + +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +@HAVE_XELATEX_FALSE@install-pdf-local: +@HAVE_XELATEX_FALSE@pdf-local: +clean: clean-am + +clean-am: clean-generic clean-libtool clean-local mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +doc: doc-am + +doc-am: doc-local + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: html-local + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: install-html-local + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: install-pdf-local + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: pdf-local + +ps: ps-am + +ps-am: + +test: test-am + +test-am: test-local + +uninstall-am: + +unit: unit-am + +unit-am: unit-local + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + clean-local cscopelist-am ctags-am distclean distclean-generic \ + distclean-libtool distdir doc-am doc-local dvi dvi-am html \ + html-am html-local info info-am install install-am \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-html-local install-info install-info-am install-man \ + install-pdf install-pdf-am install-pdf-local install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs maintainer-clean maintainer-clean-generic \ + mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ + pdf-local ps ps-am tags-am test-am test-local uninstall \ + uninstall-am unit-am unit-local + +.PRECIOUS: Makefile + + +export RST_EPILOG = $(RNDC_CONF)$(LF)$(RNDC_KEY)$(LF)$(NAMED_CONF)$(LF)$(BIND_KEYS)$(LF)$(NAMED_PID)$(LF)$(SESSION_KEY) + +export man_RST_EPILOG = $(man_RNDC_CONF)$(LF)$(man_RNDC_KEY)$(LF)$(man_NAMED_CONF)$(LF)$(man_BIND_KEYS)$(LF)$(man_NAMED_PID)$(LF)$(man_SESSION_KEY) + +html-local: + $(AM_V_SPHINX)$(SPHINX_BUILD) -b html -d $(SPHINXBUILDDIR)/.doctrees/html $(ALLSPHINXOPTS) $(SPHINXBUILDDIR)/html + +install-html-local: + $(INSTALL) -d $(DESTDIR)/$(docdir) $(DESTDIR)/$(docdir)/_static + $(INSTALL) -D $(SPHINXBUILDDIR)/html/*.html $(DESTDIR)/$(docdir)/ + cp -R $(SPHINXBUILDDIR)/html/_static/ $(DESTDIR)/$(docdir)/_static/ + +singlehtml: + $(AM_V_SPHINX)$(SPHINX_BUILD) -b singlehtml -d $(SPHINXBUILDDIR)/.doctrees/singlehtml $(ALLSPHINXOPTS) $(SPHINXBUILDDIR)/singlehtml + +install-singlehtml: singlehtml + $(INSTALL) -d $(DESTDIR)/$(docdir) $(DESTDIR)/$(docdir)/_static + $(INSTALL_DATA) $(SPHINXBUILDDIR)/singlehtml/*.html $(DESTDIR)/$(docdir)/ + cp -R $(SPHINXBUILDDIR)/singlehtml/_static/* $(DESTDIR)/$(docdir)/_static/ + +epub: + $(AM_V_SPHINX)$(SPHINX_BUILD) -b epub -d $(SPHINXBUILDDIR)/.doctrees/epub $(ALLSPHINXOPTS) $(SPHINXBUILDDIR)/epub + +install-epub: + $(INSTALL) -d $(DESTDIR)/$(docdir) + $(INSTALL_DATA) $(SPHINXBUILDDIR)/epub/*.epub $(DESTDIR)/$(docdir)/ + +@HAVE_XELATEX_TRUE@pdf-local: +@HAVE_XELATEX_TRUE@ $(AM_V_SPHINX)$(SPHINX_BUILD) -b latex -d $(SPHINXBUILDDIR)/.doctrees/latex $(ALLSPHINXOPTS) $(SPHINXBUILDDIR)/latex +@HAVE_XELATEX_TRUE@ $(MAKE) -C $(SPHINXBUILDDIR)/latex all-pdf + +@HAVE_XELATEX_TRUE@install-pdf-local: +@HAVE_XELATEX_TRUE@ $(INSTALL) -d $(DESTDIR)/$(docdir) +@HAVE_XELATEX_TRUE@ $(INSTALL_DATA) $(SPHINXBUILDDIR)/latex/*.pdf $(DESTDIR)/$(docdir)/ + +clean-local: + -rm -rf $(SPHINXBUILDDIR) + +doc-local: html singlehtml pdf epub + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/doc/arm/_ext/iscconf.py b/doc/arm/_ext/iscconf.py new file mode 100644 index 0000000..b5bd966 --- /dev/null +++ b/doc/arm/_ext/iscconf.py @@ -0,0 +1,605 @@ +############################################################################ +# Copyright (C) Internet Systems Consortium, Inc. ("ISC") +# +# SPDX-License-Identifier: MPL-2.0 +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, you can obtain one at https://mozilla.org/MPL/2.0/. +# +# See the COPYRIGHT file distributed with this work for additional +# information regarding copyright ownership. +############################################################################ + +""" +Sphinx domains for ISC configuration files. + +Use setup() to install new Sphinx domains for ISC configuration files. + +This extension is based on combination of two Sphinx extension tutorials: +https://www.sphinx-doc.org/en/master/development/tutorials/todo.html +https://www.sphinx-doc.org/en/master/development/tutorials/recipe.html +""" + +from collections import namedtuple + +from docutils.parsers.rst import Directive, directives +from docutils import nodes + +from sphinx import addnodes +from sphinx.directives import ObjectDescription +from sphinx.domains import Domain +from sphinx.roles import XRefRole +from sphinx.util import logging +from sphinx.util.nodes import make_refnode + +import checkgrammar + + +logger = logging.getLogger(__name__) + + +def split_csv(argument, required): + argument = argument or "" + outlist = list(filter(len, (s.strip() for s in argument.split(",")))) + if required and not outlist: + raise ValueError( + "a non-empty list required; provide at least one value or remove" + " this option" + ) + return outlist + + +# pylint: disable=too-many-statements +def domain_factory(domainname, domainlabel, todolist, grammar): + """ + Return parametrized Sphinx domain object. + @param domainname Name used when referencing domain in .rst: e.g. namedconf + @param confname Humand-readable name for texts, e.g. named.conf + @param todolist A placeholder object which must be pickable. + See StatementListDirective. + """ + + class StatementListDirective(Directive): + """A custom directive to generate list of statements. + It only installs placeholder which is later replaced by + process_statementlist_nodes() callback. + """ + + option_spec = { + "filter_blocks": lambda arg: split_csv(arg, required=True), + "filter_tags": lambda arg: split_csv(arg, required=True), + } + + def run(self): + placeholder = todolist("") + placeholder["isc_filter_tags"] = set(self.options.get("filter_tags", [])) + placeholder["isc_filter_blocks"] = set( + self.options.get("filter_blocks", []) + ) + return [placeholder] + + class ISCConfDomain(Domain): + """ + Custom Sphinx domain for ISC config. + Provides .. statement:: directive to define config statement and + .. statementlist:: to generate summary tables. + :ref:`statementname` works as usual. + + See https://www.sphinx-doc.org/en/master/extdev/domainapi.html + """ + + class StatementDirective(ObjectDescription): + """ + A custom directive that describes a statement, + e.g. max-cache-size. + """ + + has_content = True + required_arguments = 1 + option_spec = { + "tags": lambda arg: split_csv(arg, required=False), + # one-sentece description for use in summary tables + "short": directives.unchanged_required, + "suppress_grammar": directives.flag, + } + + @property + def isc_name(self): + names = self.get_signatures() + if len(names) != 1: + raise NotImplementedError( + "statements with more than one name are not supported", names + ) + return names[0] + + def handle_signature(self, sig, signode): + signode += addnodes.desc_name(text=sig) + return sig + + def add_target_and_index(self, _name_cls, sig, signode): + signode["ids"].append(domainname + "-statement-" + sig) + + iscconf = self.env.get_domain(domainname) + iscconf.add_statement( + sig, self.isc_tags, self.isc_short, self.isc_short_node, self.lineno + ) + + @property + def isc_tags(self): + return set(self.options.get("tags", [])) + + @property + def isc_short(self): + return self.options.get("short", "") + + @property + def isc_short_node(self): + """Short description parsed from rst to docutils node""" + return self.parse_nested_str(self.isc_short) + + def format_path(self, path): + assert path[0] == "_top" + if len(path) == 1: + return "topmost" + return ".".join(path[1:]) + + def format_paths(self, paths): + zone_types = set() + nozone_paths = [] + for path in paths: + try: + zone_idx = path.index("zone") + zone_type_txt = path[zone_idx + 1] + if zone_type_txt.startswith("type "): + zone_types.add(zone_type_txt[len("type ") :]) + else: + assert zone_type_txt == "in-view" + zone_types.add(zone_type_txt) + except (ValueError, IndexError): + nozone_paths.append(path) + condensed_paths = nozone_paths[:] + if zone_types: + condensed_paths.append( + ("_top", "zone (" + ", ".join(sorted(zone_types)) + ")") + ) + condensed_paths = sorted(condensed_paths, key=len) + return list(self.format_path(path) for path in condensed_paths) + + def format_blocks(self, grammar_blocks): + """Generate node with list of all allowed blocks""" + blocks = nodes.paragraph() + blocks += nodes.strong(text="Blocks: ") + blocks += nodes.Text(", ".join(self.format_paths(grammar_blocks))) + return blocks + + def format_grammar(self, list_blocks, grammar_grp): + """ + Generate grammar description node, optionally with list of + blocks accepting this particular grammar. + Example: Grammar (block1, block2): grammar; + """ + grammarnode = nodes.paragraph() + if list_blocks: + separator = " " + paths = ", ".join( + self.format_paths(variant.path for variant in grammar_grp) + ) + else: + separator = "" + paths = "" + subgrammar = grammar_grp[0].subgrammar + subgrammar_txt = checkgrammar.pformat_grammar(subgrammar).strip() + grammar_txt = subgrammar.get("_pprint_name", self.isc_name) + if subgrammar_txt != ";": + grammar_txt += " " + grammar_txt += subgrammar_txt + if "\n" in grammar_txt.strip(): + nodetype = nodes.literal_block + else: + nodetype = nodes.literal + grammarnode += nodes.strong(text=f"Grammar{separator}{paths}: ") + grammarnode += nodetype(text=grammar_txt) + return grammarnode + + def format_warnings(self, flags): + """Return node with a warning box about deprecated and + experimental options""" + warn = nodes.warning() + if "deprecated" in flags: + warn += nodes.paragraph( + text=( + "This option is deprecated and will be removed in a future" + " version of BIND." + ) + ) + if "experimental" in flags: + warn += nodes.paragraph( + text="This option is experimental and subject to change." + ) + return warn + + def parse_nested_str(self, instr): + """Parse string as nested rst syntax and produce a node""" + raw = nodes.paragraph(text=instr) + parsed = nodes.paragraph() + self.state.nested_parse(raw, self.content_offset, parsed) + return parsed + + def transform_content(self, contentnode: addnodes.desc_content) -> None: + """autogenerate content from structured data""" + self.workaround_transform_content = True + if self.isc_short: + contentnode.insert(0, self.isc_short_node) + if self.isc_tags: + tags = nodes.paragraph() + tags += nodes.strong(text="Tags: ") + tags += nodes.Text(", ".join(self.isc_tags)) + contentnode.insert(0, tags) + + iscconf = self.env.get_domain(domainname) + + name = self.isc_name + if name not in iscconf.statement_blocks: + return # not defined in grammar, nothing to render + + blocks = self.format_blocks(iscconf.statement_blocks[name]) + contentnode.insert(0, blocks) + + grammars = iscconf.statement_grammar_groups[name] + multi_grammar = len(grammars) > 1 + union_flags = set() + for grammar_grp in grammars: + for one_grammar_dict in grammar_grp: + union_flags = union_flags.union( + set(one_grammar_dict.subgrammar.get("_flags", [])) + ) + if "suppress_grammar" in self.options: + continue + grammarnode = self.format_grammar(multi_grammar, grammar_grp) + contentnode.insert(0, grammarnode) + + warn = self.format_warnings(union_flags) + if len(warn): + contentnode.insert(0, warn) + + def __init__(self, *args, **kwargs): + """Compability with Sphinx < 3.0.0""" + self.workaround_transform_content = False + super().__init__(*args, **kwargs) + + def run(self): + """Compability with Sphinx < 3.0.0""" + nodelist = super().run() + if not self.workaround_transform_content: + # get access to "contentnode" created inside super.run() + self.transform_content(nodelist[1][-1]) + return nodelist + + name = domainname + label = domainlabel + + directives = { + "statement": StatementDirective, + "statementlist": StatementListDirective, + } + + roles = {"ref": XRefRole(warn_dangling=True)} + initial_data = { + # name -> {"tags": [list of tags], ...}; see add_statement() + "statements": {}, + } + + indices = {} # no custom indicies + + def __init__(self, *args, **kwargs): + super().__init__(*args, **kwargs) + self.grammar = grammar + self.statement_blocks = checkgrammar.statement2block(grammar, ["_top"]) + self.statement_grammar_groups = checkgrammar.diff_statements( + self.grammar, self.statement_blocks + ) + + def get_objects(self): + """ + Sphinx API: + Iterable of Sphinx object descriptions (tuples defined in the API). + """ + for obj in self.data["statements"].values(): + yield tuple( + obj[key] + for key in [ + "fullname", + "signature", + "label", + "docname", + "anchor", + "priority", + ] + ) + + # pylint: disable=too-many-arguments + def resolve_xref(self, env, fromdocname, builder, typ, target, node, contnode): + """ + Sphinx API: + Resolve the pending_xref *node* with the given typ and target. + """ + try: + obj = self.data["statements"][self.get_statement_name(target)] + except KeyError: + return None + + refnode = make_refnode( + builder, + fromdocname, + obj["docname"], + obj["anchor"], + contnode, + obj["anchor"], + ) + return refnode + + def resolve_any_xref(self, env, fromdocname, builder, target, node, contnode): + """ + Sphinx API: + Raising NotImplementedError uses fall-back bassed on resolve_xref. + """ + raise NotImplementedError + + @staticmethod + def log_statement_overlap(new, old): + assert new["fullname"] == old["fullname"] + logger.warning( + "duplicite detected! %s previously defined at %s:%d", + new["fullname"], + old["filename"], + old["lineno"], + location=(new["docname"], new["lineno"]), + ) + + def get_statement_name(self, signature): + return "{}.{}.{}".format(domainname, "statement", signature) + + def add_statement(self, signature, tags, short, short_node, lineno): + """ + Add a new statement to the domain data structures. + No visible effect. + """ + name = self.get_statement_name(signature) + anchor = "{}-statement-{}".format(domainname, signature) + + new = { + "tags": tags, + "short": short, + "short_node": short_node, + "filename": self.env.doc2path(self.env.docname), + "lineno": lineno, + # Sphinx API + "fullname": name, # internal name + "signature": signature, # display name + "label": domainlabel + " statement", # description for index + "docname": self.env.docname, + "anchor": anchor, + "priority": 1, # search priority + } + + if name in self.data["statements"]: + self.log_statement_overlap(new, self.data["statements"][name]) + self.data["statements"][name] = new + + def clear_doc(self, docname): + """ + Sphinx API: like env-purge-doc event, but in a domain. + + Remove traces of a document in the domain-specific inventories. + """ + self.data["statements"] = dict( + { + key: obj + for key, obj in self.data["statements"].items() + if obj["docname"] != docname + } + ) + + def merge_domaindata(self, docnames, otherdata): + """Sphinx API: Merge in data regarding *docnames* from a different + domaindata inventory (coming from a subprocess in parallel builds). + + @param otherdata is self.data equivalent from another process + """ + old = self.data["statements"] + new = otherdata["statements"] + for name in set(old).intersection(set(new)): + self.log_statement_overlap(new[name], old[name]) + old.update(new) + + def check_consistency(self): + """Sphinx API""" + defined_statements = set( + obj["signature"] for obj in self.data["statements"].values() + ) + statements_in_grammar = set(self.statement_blocks) + missing_statement_sigs = statements_in_grammar.difference( + defined_statements + ) + for missing in missing_statement_sigs: + grammars = self.statement_grammar_groups[missing] + if len(grammars) == 1: + flags = grammars[0][0].subgrammar.get("_flags", []) + if ("obsolete" in flags) or ("test only" in flags): + continue + + logger.warning( + "statement %s is defined in %s grammar but is not described" + " using .. statement:: directive", + missing, + domainlabel, + ) + + extra_statement_sigs = defined_statements.difference(statements_in_grammar) + for extra in extra_statement_sigs: + fullname = self.get_statement_name(extra) + desc = self.data["statements"][fullname] + logger.warning( + ".. statement:: %s found but matching definition in %s grammar is" + " missing", + extra, + domainlabel, + location=(desc["docname"], desc["lineno"]), + ) + + @classmethod + def process_statementlist_nodes(cls, app, doctree): + """ + Replace todolist objects (placed into document using + .. statementlist::) with automatically generated table + of statements. + """ + + def gen_replacement_table(acceptable_blocks, acceptable_tags): + table_header = [ + TableColumn("ref", "Statement"), + TableColumn("short_node", "Description"), + ] + tag_header = [] + if len(acceptable_tags) != 1: + # tags column only if tag filter is not applied + tag_header = [ + TableColumn("tags_txt", "Tags"), + ] + + table_b = DictToDocutilsTableBuilder(table_header + tag_header) + table_b.append_iterable( + sorted( + filter( + lambda item: ( + ( + not acceptable_tags + or item["tags"].intersection(acceptable_tags) + ) + and ( + not acceptable_blocks + or item["block_names"].intersection( + acceptable_blocks + ) + ) + ), + iscconf.list_all(), + ), + key=lambda x: x["fullname"], + ) + ) + return table_b.get_docutils() + + env = app.builder.env + iscconf = env.get_domain(cls.name) + + for node in doctree.traverse(todolist): + acceptable_tags = node["isc_filter_tags"] + acceptable_blocks = node["isc_filter_blocks"] + node.replace_self( + gen_replacement_table(acceptable_blocks, acceptable_tags) + ) + + def list_all(self): + for statement in self.data["statements"].values(): + sig = statement["signature"] + block_names = set( + path[-1] for path in self.statement_blocks.get(sig, []) + ) + tags_txt = ", ".join(statement["tags"]) + + refpara = nodes.inline() + refnode = addnodes.pending_xref( + sig, + reftype="statement", + refdomain=domainname, + reftarget=sig, + refwarn=True, + ) + refnode += nodes.Text(sig) + refpara += refnode + + copy = statement.copy() + copy["block_names"] = block_names + copy["ref"] = refpara + copy["tags_txt"] = tags_txt + yield copy + + return ISCConfDomain + + +# source dict key: human description +TableColumn = namedtuple("TableColumn", ["dictkey", "description"]) + + +class DictToDocutilsTableBuilder: + """generate docutils table""" + + def __init__(self, header): + """@param header: [ordered list of TableColumn]s""" + self.header = header + self.table = nodes.table() + self.table["classes"] += ["colwidths-auto"] + self.returned = False + # inner nodes of the table + self.tgroup = nodes.tgroup(cols=len(self.header)) + for _ in range(len(self.header)): + # ignored because of colwidths-auto, but must be present + colspec = nodes.colspec(colwidth=1) + self.tgroup.append(colspec) + self.table += self.tgroup + self._gen_header() + + self.tbody = nodes.tbody() + self.tgroup += self.tbody + + def _gen_header(self): + thead = nodes.thead() + + row = nodes.row() + for column in self.header: + entry = nodes.entry() + entry += nodes.paragraph(text=column.description) + row += entry + + thead.append(row) + self.tgroup += thead + + def append_iterable(self, objects): + """Append rows for each object (dict), ir order. + Extract column values from keys listed in self.header.""" + for obj in objects: + row = nodes.row() + for column in self.header: + entry = nodes.entry() + value = obj[column.dictkey] + if isinstance(value, str): + value = nodes.paragraph(text=value) + else: + value = value.deepcopy() + entry += value + row += entry + self.tbody.append(row) + + def get_docutils(self): + # guard against table reuse - that's most likely an error + assert not self.returned + self.returned = True + return self.table + + +def setup(app, domainname, confname, docutilsplaceholder, grammar): + """ + Install new parametrized Sphinx domain. + """ + + Conf = domain_factory(domainname, confname, docutilsplaceholder, grammar) + app.add_domain(Conf) + app.connect("doctree-read", Conf.process_statementlist_nodes) + + return { + "version": "0.1", + "parallel_read_safe": True, + "parallel_write_safe": True, + } diff --git a/doc/arm/_ext/mergegrammar.py b/doc/arm/_ext/mergegrammar.py new file mode 100644 index 0000000..b0500eb --- /dev/null +++ b/doc/arm/_ext/mergegrammar.py @@ -0,0 +1,63 @@ +############################################################################ +# Copyright (C) Internet Systems Consortium, Inc. ("ISC") +# +# SPDX-License-Identifier: MPL-2.0 +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, you can obtain one at https://mozilla.org/MPL/2.0/. +# +# See the COPYRIGHT file distributed with this work for additional +# information regarding copyright ownership. +############################################################################ + +# Depends on CWD - Sphinx plugin + +import json +from pathlib import Path + +import parsegrammar + + +def read_zone(): + zone_grammars = {} + for file in Path("../misc/").glob("*.zoneopt"): + # in-view is not really a zone type + if file.stem == "in-view": + zone_type = "in-view" + else: + zone_type = f"type {file.stem}" + + with file.open(encoding="ascii") as fp: + zonegrammar = parsegrammar.parse_mapbody(fp) + assert len(zonegrammar) == 1 + assert "zone" in zonegrammar + zone_grammars[zone_type] = zonegrammar["zone"] + zone_grammars[zone_type]["_pprint_name"] = "zone" + + return {"zone": {"_mapbody": zone_grammars, "_ignore_this_level": True}} + + +def read_main(): + with Path("../misc/options").open(encoding="ascii") as fp: + optgrammar = parsegrammar.parse_mapbody(fp) + return optgrammar + + +def combine(): + zones = read_zone() + assert zones + rest = read_main() + assert rest + rest.update(zones) + + # this is a terrible hack + # but cfg_test cannot print zone grammars inside view + rest["view"]["_mapbody"].update(zones) + + return rest + + +if __name__ == "__main__": + full_grammar = combine() + print(json.dumps(full_grammar)) diff --git a/doc/arm/_ext/namedconf.py b/doc/arm/_ext/namedconf.py new file mode 100644 index 0000000..bcf4a0c --- /dev/null +++ b/doc/arm/_ext/namedconf.py @@ -0,0 +1,35 @@ +############################################################################ +# Copyright (C) Internet Systems Consortium, Inc. ("ISC") +# +# SPDX-License-Identifier: MPL-2.0 +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, you can obtain one at https://mozilla.org/MPL/2.0/. +# +# See the COPYRIGHT file distributed with this work for additional +# information regarding copyright ownership. +############################################################################ + +""" +Sphinx domain "namedconf". See iscconf.py for details. + +""" +from docutils import nodes + +import iscconf +import mergegrammar + + +class ToBeReplacedStatementList(nodes.General, nodes.Element): + """ + Placeholder, does nothing, but must be picklable + (= cannot be in generated class). + """ + + +def setup(app): + grammar = mergegrammar.combine() + return iscconf.setup( + app, "namedconf", "named.conf", ToBeReplacedStatementList, grammar + ) diff --git a/doc/arm/_ext/rndcconf.py b/doc/arm/_ext/rndcconf.py new file mode 100644 index 0000000..cac10e2 --- /dev/null +++ b/doc/arm/_ext/rndcconf.py @@ -0,0 +1,36 @@ +############################################################################ +# Copyright (C) Internet Systems Consortium, Inc. ("ISC") +# +# SPDX-License-Identifier: MPL-2.0 +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, you can obtain one at https://mozilla.org/MPL/2.0/. +# +# See the COPYRIGHT file distributed with this work for additional +# information regarding copyright ownership. +############################################################################ + +""" +Sphinx domain "rndcconf". See iscconf.py for details. +""" + +from docutils import nodes + +import iscconf +import parsegrammar + + +class ToBeReplacedStatementList(nodes.General, nodes.Element): + """ + Placeholder, does nothing, but must be picklable + (= cannot be in a generated class). + """ + + +def setup(app): + with open("../misc/rndc.grammar", encoding="utf-8") as filein: + grammar = parsegrammar.parse_mapbody(filein) + return iscconf.setup( + app, "rndcconf", "rndc.conf", ToBeReplacedStatementList, grammar + ) diff --git a/doc/arm/_static/custom.css b/doc/arm/_static/custom.css new file mode 100644 index 0000000..86f030f --- /dev/null +++ b/doc/arm/_static/custom.css @@ -0,0 +1,25 @@ +/* +Copyright (C) Internet Systems Consortium, Inc. ("ISC") + +SPDX-License-Identifier: MPL-2.0 + +This Source Code Form is subject to the terms of the Mozilla Public +License, v. 2.0. If a copy of the MPL was not distributed with this +file, you can obtain one at https://mozilla.org/MPL/2.0/. + +See the COPYRIGHT file distributed with this work for additional +information regarding copyright ownership. +*/ + +/* make table content wrappable */ +.wy-table-responsive table td { + white-space:normal; +} + +/* readability improvements */ +.rst-content code.literal { + color: black; +} +.rst-content code.xref { + text-decoration: underline dotted gray; +} diff --git a/doc/arm/advanced.inc.rst b/doc/arm/advanced.inc.rst new file mode 100644 index 0000000..73202eb --- /dev/null +++ b/doc/arm/advanced.inc.rst @@ -0,0 +1,420 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _advanced: + +Advanced Configurations +======================= + +.. _dynamic_update: + +Dynamic Update +-------------- + +Dynamic update is a method for adding, replacing, or deleting records in +a primary server by sending it a special form of DNS messages. The format +and meaning of these messages is specified in :rfc:`2136`. + +Dynamic update is enabled by including an :any:`allow-update` or an +:any:`update-policy` clause in the :any:`zone` statement. + +If the zone's :any:`update-policy` is set to ``local``, updates to the zone +are permitted for the key ``local-ddns``, which is generated by +:iscman:`named` at startup. See :ref:`dynamic_update_policies` for more details. + +Dynamic updates using Kerberos-signed requests can be made using the +TKEY/GSS protocol, either by setting the :any:`tkey-gssapi-keytab` option +or by setting both the :any:`tkey-gssapi-credential` and +:any:`tkey-domain` options. Once enabled, Kerberos-signed requests are +matched against the update policies for the zone, using the Kerberos +principal as the signer for the request. + +Updating of secure zones (zones using DNSSEC) follows :rfc:`3007`: RRSIG, +NSEC, and NSEC3 records affected by updates are automatically regenerated +by the server using an online zone key. Update authorization is based on +transaction signatures and an explicit server policy. + +.. _journal: + +The Journal File +~~~~~~~~~~~~~~~~ + +All changes made to a zone using dynamic update are stored in the zone's +journal file. This file is automatically created by the server when the +first dynamic update takes place. The name of the journal file is formed +by appending the extension ``.jnl`` to the name of the corresponding +zone file unless specifically overridden. The journal file is in a +binary format and should not be edited manually. + +The server also occasionally writes ("dumps") the complete contents +of the updated zone to its zone file. This is not done immediately after +each dynamic update because that would be too slow when a large zone is +updated frequently. Instead, the dump is delayed by up to 15 minutes, +allowing additional updates to take place. During the dump process, +transient files are created with the extensions ``.jnw`` and +``.jbk``; under ordinary circumstances, these are removed when the +dump is complete, and can be safely ignored. + +When a server is restarted after a shutdown or crash, it replays the +journal file to incorporate into the zone any updates that took place +after the last zone dump. + +Changes that result from incoming incremental zone transfers are also +journaled in a similar way. + +The zone files of dynamic zones cannot normally be edited by hand +because they are not guaranteed to contain the most recent dynamic +changes; those are only in the journal file. The only way to ensure +that the zone file of a dynamic zone is up-to-date is to run +:option:`rndc stop`. + +To make changes to a dynamic zone manually, follow these steps: +first, disable dynamic updates to the zone using +:option:`rndc freeze zone <rndc freeze>`. This updates the zone file with the +changes stored in its ``.jnl`` file. Then, edit the zone file. Finally, run +:option:`rndc thaw zone <rndc thaw>` to reload the changed zone and re-enable dynamic +updates. + +:option:`rndc sync zone <rndc sync>` updates the zone file with changes from the +journal file without stopping dynamic updates; this may be useful for +viewing the current zone state. To remove the ``.jnl`` file after +updating the zone file, use :option:`rndc sync -clean <rndc sync>`. + +.. _notify: + +NOTIFY +------ + +DNS NOTIFY is a mechanism that allows primary servers to notify their +secondary servers of changes to a zone's data. In response to a NOTIFY message +from a primary server, the secondary checks to see that its version of +the zone is the current version and, if not, initiates a zone transfer. + +For more information about DNS NOTIFY, see the description of the +:namedconf:ref:`notify` and :namedconf:ref`also-notify` statements. +The NOTIFY protocol is specified in :rfc:`1996`. + +.. note:: + + As a secondary zone can also be a primary to other secondaries, :iscman:`named`, by + default, sends NOTIFY messages for every zone it loads. + +.. _incremental_zone_transfers: + +Incremental Zone Transfers (IXFR) +--------------------------------- + +The incremental zone transfer (IXFR) protocol is a way for secondary servers +to transfer only changed data, instead of having to transfer an entire +zone. The IXFR protocol is specified in :rfc:`1995`. + +When acting as a primary server, BIND 9 supports IXFR for those zones where the +necessary change history information is available. These include primary +zones maintained by dynamic update and secondary zones whose data was +obtained by IXFR. For manually maintained primary zones, and for secondary +zones obtained by performing a full zone transfer (AXFR), IXFR is +supported only if the option :any:`ixfr-from-differences` is set to +``yes``. + +When acting as a secondary server, BIND 9 attempts to use IXFR unless it is +explicitly disabled. For more information about disabling IXFR, see the +description of the :any:`request-ixfr` clause of the :namedconf:ref:`server` statement. + +When a secondary server receives a zone via AXFR, it creates a new copy of the +zone database and then swaps it into place; during the loading process, queries +continue to be served from the old database with no interference. When receiving +a zone via IXFR, however, changes are applied to the running zone, which may +degrade query performance during the transfer. If a server receiving an IXFR +request determines that the response size would be similar in size to an AXFR +response, it may wish to send AXFR instead. The threshold at which this +determination is made can be configured using the +:any:`max-ixfr-ratio` option. + +.. _split_dns: + +Split DNS +--------- + +Setting up different views of the DNS space to internal +and external resolvers is usually referred to as a *split DNS* setup. +There are several reasons an organization might want to set up its DNS +this way. + +One common reason to use split DNS is to hide +"internal" DNS information from "external" clients on the Internet. +There is some debate as to whether this is actually useful. +Internal DNS information leaks out in many ways (via email headers, for +example) and most savvy "attackers" can find the information they need +using other means. However, since listing addresses of internal servers +that external clients cannot possibly reach can result in connection +delays and other annoyances, an organization may choose to use split +DNS to present a consistent view of itself to the outside world. + +Another common reason for setting up a split DNS system is to allow +internal networks that are behind filters or in :rfc:`1918` space (reserved +IP space, as documented in :rfc:`1918`) to resolve DNS on the Internet. +Split DNS can also be used to allow mail from outside back into the +internal network. + +.. _split_dns_sample: + +Example Split DNS Setup +~~~~~~~~~~~~~~~~~~~~~~~ + +Let's say a company named *Example, Inc.* (``example.com``) has several +corporate sites that have an internal network with reserved Internet +Protocol (IP) space and an external demilitarized zone (DMZ), or +"outside" section of a network, that is available to the public. + +Example, Inc. wants its internal clients to be able to resolve +external hostnames and to exchange mail with people on the outside. The +company also wants its internal resolvers to have access to certain +internal-only zones that are not available at all outside of the +internal network. + +To accomplish this, the company sets up two sets of name +servers. One set is on the inside network (in the reserved IP +space) and the other set is on bastion hosts, which are "proxy" +hosts in the DMZ that can talk to both sides of its network. + +The internal servers are configured to forward all queries, except +queries for ``site1.internal``, ``site2.internal``, +``site1.example.com``, and ``site2.example.com``, to the servers in the +DMZ. These internal servers have complete sets of information for +``site1.example.com``, ``site2.example.com``, ``site1.internal``, and +``site2.internal``. + +To protect the ``site1.internal`` and ``site2.internal`` domains, the +internal name servers must be configured to disallow all queries to +these domains from any external hosts, including the bastion hosts. + +The external servers, which are on the bastion hosts, are configured +to serve the "public" version of the ``site1.example.com`` and ``site2.example.com`` +zones. This could include things such as the host records for public +servers (``www.example.com`` and ``ftp.example.com``) and mail exchange +(MX) records (``a.mx.example.com`` and ``b.mx.example.com``). + +In addition, the public ``site1.example.com`` and ``site2.example.com`` zones should +have special MX records that contain wildcard (``*``) records pointing to +the bastion hosts. This is needed because external mail servers +have no other way of determining how to deliver mail to those internal +hosts. With the wildcard records, the mail is delivered to the +bastion host, which can then forward it on to internal hosts. + +Here's an example of a wildcard MX record: + +:: + + * IN MX 10 external1.example.com. + +Now that they accept mail on behalf of anything in the internal network, +the bastion hosts need to know how to deliver mail to internal +hosts. The resolvers on the bastion +hosts need to be configured to point to the internal name servers +for DNS resolution. + +Queries for internal hostnames are answered by the internal servers, +and queries for external hostnames are forwarded back out to the DNS +servers on the bastion hosts. + +For all of this to work properly, internal clients need to be +configured to query *only* the internal name servers for DNS queries. +This could also be enforced via selective filtering on the network. + +If everything has been set properly, Example, Inc.'s internal clients +are now able to: + +- Look up any hostnames in the ``site1.example.com`` and ``site2.example.com`` + zones. + +- Look up any hostnames in the ``site1.internal`` and + ``site2.internal`` domains. + +- Look up any hostnames on the Internet. + +- Exchange mail with both internal and external users. + +Hosts on the Internet are able to: + +- Look up any hostnames in the ``site1.example.com`` and ``site2.example.com`` + zones. + +- Exchange mail with anyone in the ``site1.example.com`` and ``site2.example.com`` + zones. + +Here is an example configuration for the setup just described above. +Note that this is only configuration information; for information on how +to configure the zone files, see :ref:`sample_configuration`. + +Internal DNS server config: + +:: + + + acl internals { 172.16.72.0/24; 192.168.1.0/24; }; + + acl externals { bastion-ips-go-here; }; + + options { + ... + ... + forward only; + // forward to external servers + forwarders { + bastion-ips-go-here; + }; + // sample allow-transfer (no one) + allow-transfer { none; }; + // restrict query access + allow-query { internals; externals; }; + // restrict recursion + allow-recursion { internals; }; + ... + ... + }; + + // sample primary zone + zone "site1.example.com" { + type primary; + file "m/site1.example.com"; + // do normal iterative resolution (do not forward) + forwarders { }; + allow-query { internals; externals; }; + allow-transfer { internals; }; + }; + + // sample secondary zone + zone "site2.example.com" { + type secondary; + file "s/site2.example.com"; + primaries { 172.16.72.3; }; + forwarders { }; + allow-query { internals; externals; }; + allow-transfer { internals; }; + }; + + zone "site1.internal" { + type primary; + file "m/site1.internal"; + forwarders { }; + allow-query { internals; }; + allow-transfer { internals; } + }; + + zone "site2.internal" { + type secondary; + file "s/site2.internal"; + primaries { 172.16.72.3; }; + forwarders { }; + allow-query { internals }; + allow-transfer { internals; } + }; + +External (bastion host) DNS server configuration: + +:: + + acl internals { 172.16.72.0/24; 192.168.1.0/24; }; + + acl externals { bastion-ips-go-here; }; + + options { + ... + ... + // sample allow-transfer (no one) + allow-transfer { none; }; + // default query access + allow-query { any; }; + // restrict cache access + allow-query-cache { internals; externals; }; + // restrict recursion + allow-recursion { internals; externals; }; + ... + ... + }; + + // sample secondary zone + zone "site1.example.com" { + type primary; + file "m/site1.foo.com"; + allow-transfer { internals; externals; }; + }; + + zone "site2.example.com" { + type secondary; + file "s/site2.foo.com"; + primaries { another_bastion_host_maybe; }; + allow-transfer { internals; externals; } + }; + +In the ``resolv.conf`` (or equivalent) on the bastion host(s): + +:: + + search ... + nameserver 172.16.72.2 + nameserver 172.16.72.3 + nameserver 172.16.72.4 + +.. _ipv6: + +IPv6 Support in BIND 9 +---------------------- + +BIND 9 fully supports all currently defined forms of IPv6 name-to-address +and address-to-name lookups. It also uses IPv6 addresses to +make queries when running on an IPv6-capable system. + +For forward lookups, BIND 9 supports only AAAA records. :rfc:`3363` +deprecated the use of A6 records, and client-side support for A6 records +was accordingly removed from BIND 9. However, authoritative BIND 9 name +servers still load zone files containing A6 records correctly, answer +queries for A6 records, and accept zone transfer for a zone containing +A6 records. + +For IPv6 reverse lookups, BIND 9 supports the traditional "nibble" +format used in the ``ip6.arpa`` domain, as well as the older, deprecated +``ip6.int`` domain. Older versions of BIND 9 supported the "binary label" +(also known as "bitstring") format, but support of binary labels has +been completely removed per :rfc:`3363`. Many applications in BIND 9 do not +understand the binary label format at all anymore, and return an +error if one is given. In particular, an authoritative BIND 9 name server will +not load a zone file containing binary labels. + +Address Lookups Using AAAA Records +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The IPv6 AAAA record is a parallel to the IPv4 A record, and, unlike the +deprecated A6 record, specifies the entire IPv6 address in a single +record. For example: + +:: + + $ORIGIN example.com. + host 3600 IN AAAA 2001:db8::1 + +Use of IPv4-in-IPv6 mapped addresses is not recommended. If a host has +an IPv4 address, use an A record, not a AAAA, with +``::ffff:192.168.42.1`` as the address. + +Address-to-Name Lookups Using Nibble Format +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +When looking up an address in nibble format, the address components are +simply reversed, just as in IPv4, and ``ip6.arpa.`` is appended to the +resulting name. For example, the following commands produce a reverse name +lookup for a host with address ``2001:db8::1``: + +:: + + $ORIGIN 0.0.0.0.0.0.0.0.8.b.d.0.1.0.0.2.ip6.arpa. + 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 14400 IN PTR ( + host.example.com. ) diff --git a/doc/arm/build.inc.rst b/doc/arm/build.inc.rst new file mode 100644 index 0000000..ccd0d32 --- /dev/null +++ b/doc/arm/build.inc.rst @@ -0,0 +1,183 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _build_bind: + +Building BIND 9 +--------------- + +To build on a Unix or Linux system, use: + +:: + + $ autoreconf -fi ### (only if building from the git repository) + $ ./configure + $ make + +Several environment variables affect compilation, and they can be set +before running ``configure``. The most significant ones are: + ++--------------------+-------------------------------------------------+ +| Variable | Description | ++====================+=================================================+ +| ``CC`` | The C compiler to use. ``configure`` tries to | +| | figure out the right one for supported systems. | ++--------------------+-------------------------------------------------+ +| ``CFLAGS`` | The C compiler flags. Defaults to include -g | +| | and/or -O2 as supported by the compiler. Please | +| | include ``-g`` if ``CFLAGS`` needs to be set. | ++--------------------+-------------------------------------------------+ +| ``LDFLAGS`` | The linker flags. Defaults to an empty string. | ++--------------------+-------------------------------------------------+ + +Additional environment variables affecting the build are listed at the +end of the ``configure`` help text, which can be obtained by running the +command: + +:: + + $ ./configure --help + +If using Emacs, the ``make tags`` command may be helpful. + +.. _build_dependencies: + +Required Libraries +~~~~~~~~~~~~~~~~~~ + +To build BIND 9, the following packages must be installed: + +- ``libcrypto``, ``libssl`` +- ``libuv`` +- ``perl`` +- ``pkg-config`` / ``pkgconfig`` / ``pkgconf`` + +BIND 9.18 requires ``libuv`` 1.0.0 or higher, using ``libuv`` >= 1.40.0 +is recommended. Compiling or running with ``libuv`` 1.35.0 or 1.36.0 is +not supported, as this could lead to an assertion failure in the UDP +receive code. On older systems, an updated ``libuv`` package needs to be +installed from sources such as EPEL, PPA, or other native sources. The +other option is to build and install ``libuv`` from source. + +OpenSSL 1.0.2e or newer is required. If the OpenSSL library is installed +in a nonstandard location, specify the prefix using +``--with-openssl=<PREFIX>`` on the ``configure`` command line. To use a +PKCS#11 hardware service module for cryptographic operations, +``engine_pkcs11`` from the OpenSC project must be compiled and used. + +To build BIND from the git repository, the following tools must also be +installed: + +- ``autoconf`` (includes ``autoreconf``) +- ``automake`` +- ``libtool`` + +Optional Features +~~~~~~~~~~~~~~~~~ + +To see a full list of configuration options, run ``configure --help``. + +To improve performance, use of the ``jemalloc`` library +(http://jemalloc.net/) is strongly recommended. + +To support :rfc:`DNS over HTTPS (DoH) <8484>`, the server must be linked +with ``libnghttp2`` (https://nghttp2.org/). If the library is +unavailable, ``--disable-doh`` can be used to disable DoH support. + +To support the HTTP statistics channel, the server must be linked with +at least one of the following libraries: ``libxml2`` +(http://xmlsoft.org) or ``json-c`` (https://github.com/json-c/json-c). +If these are installed at a nonstandard location, then: + +- for ``libxml2``, specify the prefix using ``--with-libxml2=/prefix``, +- for ``json-c``, adjust ``PKG_CONFIG_PATH``. + +To support compression on the HTTP statistics channel, the server must +be linked against ``zlib`` (https://zlib.net/). If this is installed in +a nonstandard location, specify the prefix using +``--with-zlib=/prefix``. + +To support storing configuration data for runtime-added zones in an LMDB +database, the server must be linked with ``liblmdb`` +(https://github.com/LMDB/lmdb). If this is installed in a nonstandard +location, specify the prefix using ``--with-lmdb=/prefix``. + +To support MaxMind GeoIP2 location-based ACLs, the server must be linked +with ``libmaxminddb`` (https://maxmind.github.io/libmaxminddb/). This is +turned on by default if the library is found; if the library is +installed in a nonstandard location, specify the prefix using +``--with-maxminddb=/prefix``. GeoIP2 support can be switched off with +``--disable-geoip``. + +For DNSTAP packet logging, ``libfstrm`` +(https://github.com/farsightsec/fstrm) and ``libprotobuf-c`` +(https://developers.google.com/protocol-buffers) must be installed, and +BIND must be configured with ``--enable-dnstap``. + +To support internationalized domain names in :iscman:`dig`, ``libidn2`` +(https://www.gnu.org/software/libidn/#libidn2) must be installed. If the +library is installed in a nonstandard location, specify the prefix using +``--with-libidn2=/prefix`` or adjust ``PKG_CONFIG_PATH``. + +For line editing in :iscman:`nsupdate` and :iscman:`nslookup`, either the +``readline`` (https://tiswww.case.edu/php/chet/readline/rltop.html) or +the ``libedit`` library (https://www.thrysoee.dk/editline/) must be +installed. If these are installed at a nonstandard location, adjust +``PKG_CONFIG_PATH``. ``readline`` is used by default, and ``libedit`` +can be explicitly requested using ``--with-readline=libedit``. + +Certain compiled-in constants and default settings can be decreased to +values better suited to small machines, e.g. OpenWRT boxes, by +specifying ``--with-tuning=small`` on the ``configure`` command line. +This decreases memory usage by using smaller structures, but degrades +performance. + +On Linux, process capabilities are managed in user space using the +``libcap`` library +(https://git.kernel.org/pub/scm/libs/libcap/libcap.git/), which can be +installed on most Linux systems via the ``libcap-dev`` or +``libcap-devel`` package. Process capability support can also be +disabled by configuring with ``--disable-linux-caps``. + +On some platforms it is necessary to explicitly request large file +support to handle files bigger than 2GB. This can be done by using +``--enable-largefile`` on the ``configure`` command line. + +Support for the “fixed” RRset-order option can be enabled or disabled by +specifying ``--enable-fixed-rrset`` or ``--disable-fixed-rrset`` on the +``configure`` command line. By default, fixed RRset-order is disabled to +reduce memory footprint. + +The ``--enable-querytrace`` option causes :iscman:`named` to log every step +while processing every query. The ``--enable-singletrace`` option turns +on the same verbose tracing, but allows an individual query to be +separately traced by setting its query ID to 0. These options should +only be enabled when debugging, because they have a significant negative +impact on query performance. + +``make install`` installs :iscman:`named` and the various BIND 9 libraries. By +default, installation is into /usr/local, but this can be changed with +the ``--prefix`` option when running ``configure``. + +The option ``--sysconfdir`` can be specified to set the directory where +configuration files such as :iscman:`named.conf` go by default; +``--localstatedir`` can be used to set the default parent directory of +``run/named.pid``. ``--sysconfdir`` defaults to ``$prefix/etc`` and +``--localstatedir`` defaults to ``$prefix/var``. + +macOS +~~~~~ + +Building on macOS assumes that the “Command Tools for Xcode” are +installed. These can be downloaded from +https://developer.apple.com/download/more/ or, if Xcode is already +installed, simply run ``xcode-select --install``. (Note that an Apple ID +may be required to access the download page.) diff --git a/doc/arm/catz.inc.rst b/doc/arm/catz.inc.rst new file mode 100644 index 0000000..fec0759 --- /dev/null +++ b/doc/arm/catz.inc.rst @@ -0,0 +1,301 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _catz-info: + +Catalog Zones +------------- + +A "catalog zone" is a special DNS zone that contains a list of other +zones to be served, along with their configuration parameters. Zones +listed in a catalog zone are called "member zones." When a catalog zone +is loaded or transferred to a secondary server which supports this +functionality, the secondary server creates the member zones +automatically. When the catalog zone is updated (for example, to add or +delete member zones, or change their configuration parameters), those +changes are immediately put into effect. Because the catalog zone is a +normal DNS zone, these configuration changes can be propagated using the +standard AXFR/IXFR zone transfer mechanism. + +Catalog zones' format and behavior are specified as an Internet draft +for interoperability among DNS implementations. The +latest revision of the DNS catalog zones draft can be found here: +https://datatracker.ietf.org/doc/draft-toorop-dnsop-dns-catalog-zones/ . + +Principle of Operation +~~~~~~~~~~~~~~~~~~~~~~ + +Normally, if a zone is to be served by a secondary server, the +:iscman:`named.conf` file on the server must list the zone, or the zone must +be added using :option:`rndc addzone`. In environments with a large number of +secondary servers, and/or where the zones being served are changing +frequently, the overhead involved in maintaining consistent zone +configuration on all the secondary servers can be significant. + +A catalog zone is a way to ease this administrative burden: it is a DNS +zone that lists member zones that should be served by secondary servers. +When a secondary server receives an update to the catalog zone, it adds, +removes, or reconfigures member zones based on the data received. + +To use a catalog zone, it must first be set up as a normal zone on both the +primary and secondary servers that are configured to use it. It +must also be added to a :any:`catalog-zones` list in the :namedconf:ref:`options` or +:any:`view` statement in :iscman:`named.conf`. This is comparable to the way a +policy zone is configured as a normal zone and also listed in a +:any:`response-policy` statement. + +To use the catalog zone feature to serve a new member zone: + +- Set up the member zone to be served on the primary as normal. This + can be done by editing :iscman:`named.conf` or by running + :option:`rndc addzone`. + +- Add an entry to the catalog zone for the new member zone. This can + be done by editing the catalog zone's zone file and running + :option:`rndc reload`, or by updating the zone using :iscman:`nsupdate`. + +The change to the catalog zone is propagated from the primary to all +secondaries using the normal AXFR/IXFR mechanism. When the secondary receives the +update to the catalog zone, it detects the entry for the new member +zone, creates an instance of that zone on the secondary server, and points +that instance to the :any:`primaries` specified in the catalog zone data. The +newly created member zone is a normal secondary zone, so BIND +immediately initiates a transfer of zone contents from the primary. Once +complete, the secondary starts serving the member zone. + +Removing a member zone from a secondary server requires only +deleting the member zone's entry in the catalog zone; the change to the +catalog zone is propagated to the secondary server using the normal +AXFR/IXFR transfer mechanism. The secondary server, on processing the +update, notices that the member zone has been removed, stops +serving the zone, and removes it from its list of configured zones. +However, removing the member zone from the primary server must be done +by editing the configuration file or running +:option:`rndc delzone`. + +Configuring Catalog Zones +~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: catalog-zones + :tags: zone + :short: Configures catalog zones in :iscman:`named.conf`. + +Catalog zones are configured with a :any:`catalog-zones` statement in the +:namedconf:ref:`options` or :any:`view` section of :iscman:`named.conf`. For example: + +:: + + catalog-zones { + zone "catalog.example" + default-primaries { 10.53.0.1; } + in-memory no + zone-directory "catzones" + min-update-interval 10; + }; + +This statement specifies that the zone ``catalog.example`` is a catalog +zone. This zone must be properly configured in the same view. In most +configurations, it would be a secondary zone. + +The options following the zone name are not required, and may be +specified in any order. + +``default-masters`` + Synonym for ``default-primaries``. + +``default-primaries`` + This option defines the default primaries for member + zones listed in a catalog zone, and can be overridden by options within + a catalog zone. If no such options are included, then member zones + transfer their contents from the servers listed in this option. + +``in-memory`` + This option, if set to ``yes``, causes member zones to be + stored only in memory. This is functionally equivalent to configuring a + secondary zone without a :any:`file` option. The default is ``no``; member + zones' content is stored locally in a file whose name is + automatically generated from the view name, catalog zone name, and + member zone name. + +``zone-directory`` + This option causes local copies of member zones' zone files to be + stored in the specified directory, if ``in-memory`` is not set to + ``yes``. The default is to store zone files in the server's working + directory. A non-absolute pathname in ``zone-directory`` is assumed + to be relative to the working directory. + +``min-update-interval`` + This option sets the minimum interval between updates to catalog + zones, in seconds. If an update to a catalog zone (for example, via + IXFR) happens less than ``min-update-interval`` seconds after the + most recent update, the changes are not carried out until this + interval has elapsed. The default is 5 seconds. + +Catalog zones are defined on a per-view basis. Configuring a non-empty +:any:`catalog-zones` statement in a view automatically turns on +:any:`allow-new-zones` for that view. This means that :option:`rndc addzone` +and :option:`rndc delzone` also work in any view that supports catalog +zones. + +Catalog Zone Format +~~~~~~~~~~~~~~~~~~~ + +A catalog zone is a regular DNS zone; therefore, it must have a single +``SOA`` and at least one ``NS`` record. + +A record stating the version of the catalog zone format is also +required. If the version number listed is not supported by the server, +then a catalog zone may not be used by that server. + +:: + + catalog.example. IN SOA . . 2016022901 900 600 86400 1 + catalog.example. IN NS invalid. + version.catalog.example. IN TXT "2" + +Note that this record must have the domain name +``version.catalog-zone-name``. The data +stored in a catalog zone is indicated by the domain name label +immediately before the catalog zone domain. Currently BIND supports catalog zone +schema versions "1" and "2". + +Also note that the catalog zone must have an NS record in order to be a valid +DNS zone, and using the value "invalid." for NS is recommended. + +A member zone is added by including a ``PTR`` resource record in the +``zones`` sub-domain of the catalog zone. The record label can be any unique label. +The target of the PTR record is the member zone name. For example, to add member zones +``domain.example`` and ``domain2.example``: + +:: + + 5960775ba382e7a4e09263fc06e7c00569b6a05c.zones.catalog.example. IN PTR domain.example. + uniquelabel.zones.catalog.example. IN PTR domain2.example. + +The label is necessary to identify custom properties (see below) for a specific member zone. +Also, the zone state can be reset by changing its label, in which case BIND will remove +the member zone and add it back. + +Catalog Zone Custom Properties +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +BIND uses catalog zones custom properties to define different properties which +can be set either globally for the whole catalog +zone or for a single member zone. Global custom properties override the settings +in the configuration file, and member zone custom properties override global +custom properties. + +For the version "1" of the schema custom properties must be placed without a special suffix. + +For the version "2" of the schema custom properties must be placed under the ".ext" suffix. + +Global custom properties are set at the apex of the catalog zone, e.g.: + +:: + + primaries.ext.catalog.example. IN AAAA 2001:db8::1 + +BIND currently supports the following custom properties: + +- A simple :any:`primaries` definition: + + :: + + primaries.ext.catalog.example. IN A 192.0.2.1 + + + This custom property defines a primary server for the member zones, which can be + either an A or AAAA record. If multiple primaries are set, the order in + which they are used is random. + + Note: ``masters`` can be used as a synonym for :any:`primaries`. + +- A :any:`primaries` with a TSIG key defined: + + :: + + label.primaries.ext.catalog.example. IN A 192.0.2.2 + label.primaries.ext.catalog.example. IN TXT "tsig_key_name" + + + This custom property defines a primary server for the member zone with a TSIG + key set. The TSIG key must be configured in the configuration file. + ``label`` can be any valid DNS label. + + Note: ``masters`` can be used as a synonym for :any:`primaries`. + +- :any:`allow-query` and :any:`allow-transfer` ACLs: + + :: + + allow-query.ext.catalog.example. IN APL 1:10.0.0.1/24 + allow-transfer.ext.catalog.example. IN APL !1:10.0.0.1/32 1:10.0.0.0/24 + + + These custom properties are the equivalents of :any:`allow-query` and + :any:`allow-transfer` options in a zone declaration in the :iscman:`named.conf` + configuration file. The ACL is processed in order; if there is no + match to any rule, the default policy is to deny access. For the + syntax of the APL RR, see :rfc:`3123`. + +The member zone-specific custom properties are defined the same way as global +custom properties, but in the member zone subdomain: + +:: + + primaries.ext.5960775ba382e7a4e09263fc06e7c00569b6a05c.zones.catalog.example. IN A 192.0.2.2 + label.primaries.ext.5960775ba382e7a4e09263fc06e7c00569b6a05c.zones.catalog.example. IN AAAA 2001:db8::2 + label.primaries.ext.5960775ba382e7a4e09263fc06e7c00569b6a05c.zones.catalog.example. IN TXT "tsig_key_name" + allow-query.ext.5960775ba382e7a4e09263fc06e7c00569b6a05c.zones.catalog.example. IN APL 1:10.0.0.0/24 + primaries.ext.uniquelabel.zones.catalog.example. IN A 192.0.2.3 + +Custom properties defined for a specific zone override the +global custom properties defined in the catalog zone. These in turn override the +global options defined in the :any:`catalog-zones` statement in the +configuration file. + +Note that none of the global records for a custom property are inherited if any +records are defined for that custom property for the specific zone. For example, +if the zone had a :any:`primaries` record of type A but not AAAA, it +would *not* inherit the type AAAA record from the global custom property +or from the global option in the configuration file. + +Change of Ownership (coo) +~~~~~~~~~~~~~~~~~~~~~~~~~ + +BIND supports the catalog zones "Change of Ownership" (coo) property. When the +same entry which exists in one catalog zone is added into another catalog zone, +the default behavior for BIND is to ignore it, and continue serving the zone +using the catalog zone where it was originally existed, unless it is removed +from there, then it can be added into the new one. + +Using the ``coo`` property it is possible to gracefully move a zone from one +catalog zone into another, by letting the catalog consumers know that it is +permitted to do so. To do that, the original catalog zone should be updated with +a new record with ``coo`` custom property: + +:: + + uniquelabel.zones.catalog.example. IN PTR domain2.example. + coo.uniquelabel.zones.catalog.example. IN PTR catalog2.example. + +Here, the ``catalog.example`` catalog zone gives permission for the member zone +with label "uniquelabel" to be transferred into ``catalog2.example`` catalog +zone. Catalog consumers which support the ``coo`` property will then take note, +and when the zone is finally added into ``catalog2.example`` catalog zone, +catalog consumers will change the ownership of the zone from ``catalog.example`` +to ``catalog2.example``. BIND's implementation simply deletes the zone from the +old catalog zone and adds it back into the new catalog zone, which also means +that all associated state for the just migrated zone will be reset, including +when the unique label is the same. + +The record with ``coo`` custom property can be later deleted by the +catalog zone operator after confirming that all the consumers have received +it and have successfully changed the ownership of the zone. diff --git a/doc/arm/chapter1.rst b/doc/arm/chapter1.rst new file mode 100644 index 0000000..d3d0c70 --- /dev/null +++ b/doc/arm/chapter1.rst @@ -0,0 +1,14 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. include:: introduction.inc.rst +.. include:: intro-dns-bind.inc.rst +.. include:: intro-security.inc.rst diff --git a/doc/arm/chapter10.rst b/doc/arm/chapter10.rst new file mode 100644 index 0000000..1e8425e --- /dev/null +++ b/doc/arm/chapter10.rst @@ -0,0 +1,12 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. include:: build.inc.rst diff --git a/doc/arm/chapter2.rst b/doc/arm/chapter2.rst new file mode 100644 index 0000000..bbf8477 --- /dev/null +++ b/doc/arm/chapter2.rst @@ -0,0 +1,13 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. include:: requirements.inc.rst +.. include:: platforms.inc.rst diff --git a/doc/arm/chapter3.rst b/doc/arm/chapter3.rst new file mode 100644 index 0000000..509dc48 --- /dev/null +++ b/doc/arm/chapter3.rst @@ -0,0 +1,17 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. highlight:: none + +.. include:: config-intro.inc.rst +.. include:: config-auth.inc.rst +.. include:: config-resolve.inc.rst +.. include:: zones.inc.rst diff --git a/doc/arm/chapter4.rst b/doc/arm/chapter4.rst new file mode 100644 index 0000000..305a275 --- /dev/null +++ b/doc/arm/chapter4.rst @@ -0,0 +1,13 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. include:: dns-ops.inc.rst +.. include:: plugins.inc.rst
\ No newline at end of file diff --git a/doc/arm/chapter5.rst b/doc/arm/chapter5.rst new file mode 100644 index 0000000..365deb4 --- /dev/null +++ b/doc/arm/chapter5.rst @@ -0,0 +1,14 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. include:: dnssec.inc.rst +.. include:: managed-keys.inc.rst +.. include:: pkcs11.inc.rst diff --git a/doc/arm/chapter6.rst b/doc/arm/chapter6.rst new file mode 100644 index 0000000..68d98bc --- /dev/null +++ b/doc/arm/chapter6.rst @@ -0,0 +1,16 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. include:: advanced.inc.rst +.. include:: dlz.inc.rst +.. include:: dyndb.inc.rst +.. include:: catz.inc.rst +.. include:: rpz.inc.rst diff --git a/doc/arm/chapter7.rst b/doc/arm/chapter7.rst new file mode 100644 index 0000000..429acea --- /dev/null +++ b/doc/arm/chapter7.rst @@ -0,0 +1,15 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. include:: security.inc.rst +.. include:: tsig.inc.rst +.. include:: tkey.inc.rst +.. include:: sig0.inc.rst diff --git a/doc/arm/chapter9.rst b/doc/arm/chapter9.rst new file mode 100644 index 0000000..afe54e3 --- /dev/null +++ b/doc/arm/chapter9.rst @@ -0,0 +1,13 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. include:: troubleshooting.inc.rst + diff --git a/doc/arm/conf.py b/doc/arm/conf.py new file mode 100644 index 0000000..6224f0f --- /dev/null +++ b/doc/arm/conf.py @@ -0,0 +1,190 @@ +############################################################################ +# Copyright (C) Internet Systems Consortium, Inc. ("ISC") +# +# SPDX-License-Identifier: MPL-2.0 +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, you can obtain one at https://mozilla.org/MPL/2.0/. +# +# See the COPYRIGHT file distributed with this work for additional +# information regarding copyright ownership. +############################################################################ + +from pathlib import Path +import re +import sys + +from typing import List, Tuple + +from docutils import nodes +from docutils.nodes import Node, system_message +from docutils.parsers.rst import roles + +from sphinx import addnodes + +try: + from sphinx.util.docutils import ReferenceRole +except ImportError: + # pylint: disable=too-few-public-methods + class ReferenceRole(roles.GenericRole): + """ + The ReferenceRole class (used as a base class by GitLabRefRole + below) is only defined in Sphinx >= 2.0.0. For older Sphinx + versions, this stub version of the ReferenceRole class is used + instead. + """ + + def __init__(self): + super().__init__("", nodes.strong) + + +GITLAB_BASE_URL = "https://gitlab.isc.org/isc-projects/bind9/-/" + + +# Custom Sphinx role enabling automatic hyperlinking to GitLab issues/MRs. +class GitLabRefRole(ReferenceRole): + def __init__(self, base_url: str) -> None: + self.base_url = base_url + super().__init__() + + def run(self) -> Tuple[List[Node], List[system_message]]: + gl_identifier = "[GL %s]" % self.target + + target_id = "index-%s" % self.env.new_serialno("index") + entries = [("single", "GitLab; " + gl_identifier, target_id, "", None)] + + index = addnodes.index(entries=entries) + target = nodes.target("", "", ids=[target_id]) + self.inliner.document.note_explicit_target(target) + + try: + refuri = self.build_uri() + reference = nodes.reference( + "", "", internal=False, refuri=refuri, classes=["gl"] + ) + if self.has_explicit_title: + reference += nodes.strong(self.title, self.title) + else: + reference += nodes.strong(gl_identifier, gl_identifier) + except ValueError: + error_text = "invalid GitLab identifier %s" % self.target + msg = self.inliner.reporter.error(error_text, line=self.lineno) + prb = self.inliner.problematic(self.rawtext, self.rawtext, msg) + return [prb], [msg] + + return [index, target, reference], [] + + def build_uri(self): + if self.target[0] == "#": + return self.base_url + "issues/%d" % int(self.target[1:]) + if self.target[0] == "!": + return self.base_url + "merge_requests/%d" % int(self.target[1:]) + raise ValueError + + +def setup(app): + roles.register_local_role("gl", GitLabRefRole(GITLAB_BASE_URL)) + app.add_crossref_type("iscman", "iscman", "pair: %s; manual page") + + +# +# Configuration file for the Sphinx documentation builder. +# +# This file only contains a selection of the most common options. For a full +# list see the documentation: +# http://www.sphinx-doc.org/en/master/config + +# -- Path setup -------------------------------------------------------------- + +# If extensions (or modules to document with autodoc) are in another directory, +# add these directories to sys.path here. If the directory is relative to the +# documentation root, make it absolute. +# +sys.path.append(str(Path(__file__).resolve().parent / "_ext")) +sys.path.append(str(Path(__file__).resolve().parent.parent / "misc")) + +# -- Project information ----------------------------------------------------- + +project = "BIND 9" +# pylint: disable=redefined-builtin +copyright = "2023, Internet Systems Consortium" +author = "Internet Systems Consortium" + +m4_vars = {} +with open("../../configure.ac", encoding="utf-8") as configure_ac: + for line in configure_ac: + match = re.match( + r"m4_define\(\[(?P<key>bind_VERSION_[A-Z]+)\], (?P<val>[^)]*)\)dnl", line + ) + if match: + m4_vars[match.group("key")] = match.group("val") + +version = "%s.%s.%s%s" % ( + m4_vars["bind_VERSION_MAJOR"], + m4_vars["bind_VERSION_MINOR"], + m4_vars["bind_VERSION_PATCH"], + m4_vars["bind_VERSION_EXTRA"], +) +release = version + +# -- General configuration --------------------------------------------------- + +# Add any Sphinx extension module names here, as strings. They can be +# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom +# ones. +extensions = ["namedconf", "rndcconf"] + +# Add any paths that contain templates here, relative to this directory. +templates_path = ["_templates"] + +# List of patterns, relative to source directory, that match files and +# directories to ignore when looking for source files. +# This pattern also affects html_static_path and html_extra_path. +exclude_patterns = ["_build", "Thumbs.db", ".DS_Store", "*.inc.rst"] + +# The master toctree document. +master_doc = "index" + +# -- Options for HTML output ------------------------------------------------- + +# The theme to use for HTML and HTML Help pages. See the documentation for +# a list of builtin themes. +# +html_theme = "sphinx_rtd_theme" +html_static_path = ["_static"] +html_css_files = ["custom.css"] + +# -- Options for EPUB output ------------------------------------------------- + +epub_basename = "Bv9ARM" + +# -- Options for LaTeX output ------------------------------------------------ +latex_engine = "xelatex" + +# pylint disable=line-too-long +latex_documents = [ + ( + master_doc, + "Bv9ARM.tex", + "BIND 9 Administrator Reference Manual", + author, + "manual", + ), +] + +latex_logo = "isc-logo.pdf" + +# +# The rst_epilog will be completely overwritten from the Makefile, +# the definition here is provided purely for situations when +# sphinx-build is run by hand. +# +rst_epilog = """ +.. |rndc_conf| replace:: ``/etc/rndc.conf`` +.. |rndc_key| replace:: ``/etc/rndc.key`` +.. |named_conf| replace:: ``/etc/named.conf`` +.. |bind_keys| replace:: ``/etc/bind.keys`` +.. |named_pid| replace:: ``/run/named.pid`` +.. |session_key| replace:: ``/run/session.key`` +""" diff --git a/doc/arm/config-auth.inc.rst b/doc/arm/config-auth.inc.rst new file mode 100644 index 0000000..b054fb0 --- /dev/null +++ b/doc/arm/config-auth.inc.rst @@ -0,0 +1,268 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _config_auth_samples: + +Authoritative Name Servers +-------------------------- + +These provide authoritative answers to user queries for the zones +they support: for instance, the zone data describing the domain name **example.com**. An +authoritative name server may support one or many zones. + +Each zone may be defined as either a **primary** or a **secondary**. A primary zone +reads its zone data directly from a file system. A secondary zone obtains its zone +data from the primary zone using a process called **zone transfer**. Both the primary +and the secondary zones provide authoritative data for their zone; there is no difference +in the answer to a query from a primary or a secondary zone. An authoritative name server +may support any combination of primary and secondary zones. + +.. Note:: The terms **primary** and **secondary** do not imply any access + priority. Resolvers (name servers that provide the complete answers to user + queries) are not aware of (and cannot find out) whether an authoritative + answer comes from the primary or secondary name server. Instead, the + resolver uses the list of authoritative servers for the zone (there must be + at least two) and maintains a Round Trip Time (RTT) - the time taken to + respond to the query - for each server in the list. The resolver uses the + lowest-value server (the fastest) as its preferred server for the zone and + continues to do so until its RTT becomes higher than the next slowest in its + list, at which time that one becomes the preferred server. + + For reasons of backward compatibility BIND 9 treats "primary" and "master" as + synonyms, as well as "secondary" and "slave." + +The following diagram shows the relationship between the primary and secondary +name servers. The text below explains the process in detail. + +.. figure:: primary-secondary.png + :align: center + + Authoritative Primary and Secondary Name Servers + +The numbers in parentheses in the following text refer to the numbered items in the diagram above. + +1. The authoritative primary name server always loads (or reloads) its zone + files from (1) a local or networked filestore. + +2. The authoritative secondary name server always loads its zone data from a + primary via a **zone transfer** operation. Zone transfer may use **AXFR** + (complete zone transfer) or **IXFR** (incremental zone transfer), but only + if both primary and secondary name servers support the service. The zone + transfer process (either AXFR or IXFR) works as follows: + + a) The secondary name server for the zone reads (3 and 4) the + :ref:`SOA RR<soa_rr>` periodically. The interval is defined by the **refresh** + parameter of the Start of Authority (SOA) RR. + + b) The secondary compares the **serial number** parameter of the SOA RR + received from the primary with the serial number in the SOA RR of its + current zone data. + + c) If the received serial number is arithmetically greater (higher) than the + current one, the secondary initiates a zone transfer (5) using AXFR or IXFR + (depending on the primary and secondary configuration), using TCP over + port 53 (6). + +3. The typically recommended zone refresh times for the SOA RR (the time + interval when the secondary reads or polls the primary for the zone SOA RR) + are multiples of hours to reduce traffic loads. Worst-case zone change + propagation can therefore take extended periods. + +4. The optional NOTIFY (:rfc:`1996`) feature (2) is automatically configured; + use the :namedconf:ref:`notify` statement to turn off the feature. + Whenever the primary loads or reloads a zone, it sends a NOTIFY message to + the configured secondary (or secondaries) and may optionally be configured + to send the NOTIFY message to other hosts using the + :any:`also-notify` statement. The NOTIFY message simply + indicates to the secondary that the primary has loaded or reloaded the zone. + On receipt of the NOTIFY message, the secondary respons to indicate it has received the NOTIFY and immediately reads the SOA RR + from the primary (as described in section 2 a. above). If the zone file has + changed, propagation is practically immediate. + +The authoritative samples all use NOTIFY but identify the statements used, so +that they can be removed if not required. + +.. _sample_primary: + +Primary Authoritative Name Server +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The zone files are unmodified :ref:`from the base samples<base_zone_file>` but +the :iscman:`named.conf` file has been modified as shown: + +.. code-block:: c + + // authoritative primary named.conf file + // options clause defining the server-wide properties + options { + // all relative paths use this directory as a base + directory "/var"; + // version statement for security to avoid hacking known weaknesses + // if the real version number is revealed + version "not currently available"; + // This is the default - allows user queries from any IP + allow-query { any; }; + // normal server operations may place items in the cache + // this prevents any user query from accessing these items + // only authoritative zone data will be returned + allow-query-cache { none; }; + // Do not provide recursive service to user queries + recursion no; + }; + // logging clause + // log to /var/log/named/example.log all events from info UP in severity (no debug) + // uses 3 files in rotation swaps files when size reaches 250K + // failure messages that occur before logging is established are + // in syslog (/var/log/messages) + // + logging { + channel example_log { + // uses a relative path name and the directory statement to + // expand to /var/log/named/example.log + file "log/named/example.log" versions 3 size 250k; + // only log info and up messages - all others discarded + severity info; + }; + category default { + example_log; + }; + }; + // Provide forward mapping zone for localhost + // (optional) + zone "localhost" { + type primary; + file "master/localhost-forward.db"; + notify no; + }; + // Provide reverse mapping zone for the loopback + // address 127.0.0.1 + zone "0.0.127.in-addr.arpa" { + type primary; + file "localhost.rev"; + notify no; + }; + // We are the primary server for example.com + zone "example.com" { + // this is the primary name server for the zone + type primary; + file "example.com"; + // this is the default + notify yes; + // IP addresses of secondary servers allowed to + // transfer example.com from this server + allow-transfer { + 192.168.4.14; + 192.168.5.53; + }; + }; + +The added statements and blocks are commented in the above file. + +The :any:`zone` block, and :any:`allow-query`, +:any:`allow-query-cache`, +:any:`allow-transfer`, :any:`file`, +:namedconf:ref:`notify`, :any:`recursion`, and :any:`type` +statements are described in detail in the appropriate sections. + +.. _sample_secondary: + +Secondary Authoritative Name Server +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The zone files ``local-host-forward.db`` and ``localhost.rev`` are unmodified +:ref:`from the base samples<base_zone_file>`. The **example.com** zone file is +not required (the zone file is obtained from the primary via zone transfer). +The :ref:`named.conf<named_conf>` file has been modified as shown: + +.. code-block:: c + + // authoritative secondary named.conf file + // options clause defining the server-wide properties + options { + // all relative paths use this directory as a base + directory "/var"; + // version statement for security to avoid hacking known weaknesses + // if the real version number is revealed + version "not currently available"; + // This is the default - allows user queries from any IP + allow-query { any; }; + // normal server operations may place items in the cache + // this prevents any user query from accessing these items + // only authoritative zone data will be returned + allow-query-cache { none; }; + // Do not provide recursive service to user queries + recursion no; + }; + // logging clause + // log to /var/log/named/example.log all events from info UP in severity (no debug) + // uses 3 files in rotation swaps files when size reaches 250K + // failure messages that occur before logging is established are + // in syslog (/var/log/messages) + // + logging { + channel example_log { + // uses a relative path name and the directory statement to + // expand to /var/log/named/example.log + file "log/named/example.log" versions 3 size 250k; + // only log info and up messages - all others discarded + severity info; + }; + category default { + example_log; + }; + }; + // Provide forward mapping zone for localhost + // (optional) + zone "localhost" { + type primary; + file "master/localhost-forward.db"; + notify no; + }; + // Provide reverse mapping zone for the loopback + // address 127.0.0.1 + zone "0.0.127.in-addr.arpa" { + type primary; + file "localhost.rev"; + notify no; + }; + // We are the secondary server for example.com + zone "example.com" { + // this is a secondary server for the zone + type secondary; + // the file statement here allows the secondary to save + // each zone transfer so that in the event of a program restart + // the zone can be loaded immediately and the server can start + // to respond to queries without waiting for a zone transfer + file "example.com.saved"; + // IP address of example.com primary server + primaries { 192.168.254.2; }; + }; + +The statements and blocks added are all commented in the above file. + +The :any:`zone` block, and :any:`allow-query`, +:any:`allow-query-cache`, +:any:`allow-transfer`, :any:`file`, +:namedconf:ref:`primaries`, +:any:`recursion`, and :any:`type` statements are described in +detail in the appropriate sections. + +If NOTIFY is not being used, no changes are required in this +:ref:`named.conf<named_conf>` file, since it is the primary that initiates the NOTIFY +message. + +.. note:: + Just when the reader thought they understood primary and secondary, things + can get more complicated. A secondary zone can also be a primary to other + secondaries: :iscman:`named`, by default, sends NOTIFY messages for every + zone it loads. Specifying :ref:`notify primary-only;<notify>` in the + :any:`zone` block for the secondary causes :iscman:`named` to + only send NOTIFY messages for primary zones that it loads. diff --git a/doc/arm/config-intro.inc.rst b/doc/arm/config-intro.inc.rst new file mode 100644 index 0000000..d041ecc --- /dev/null +++ b/doc/arm/config-intro.inc.rst @@ -0,0 +1,205 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _configuration: + +.. _sample_configuration: + +Configurations and Zone Files +============================= + +Introduction +------------ + +BIND 9 uses a single configuration file called :ref:`named.conf <named_conf>`. +which is typically located in either /etc/namedb or +/usr/local/etc/namedb. + + .. Note:: If :ref:`rndc<ops_rndc>` is being used locally (on the same host + as BIND 9) then an additional file :iscman:`rndc.conf` may be present, though + :iscman:`rndc` operates without this file. If :iscman:`rndc` is being run + from a remote host then an :iscman:`rndc.conf` file must be present as it + defines the link characteristics and properties. + +Depending on the functionality of the system, one or more zone files is +required. + +The samples given throughout this and subsequent chapters use a standard base +format for both the :iscman:`named.conf` and the zone files for **example.com**. The +intent is for the reader to see the evolution from a common base as features +are added or removed. + +.. _base_named_conf: + +``named.conf`` Base File +~~~~~~~~~~~~~~~~~~~~~~~~ + +This file illustrates the typical format and layout style used for +:iscman:`named.conf` and provides a basic logging service, which may be extended +as required by the user. + +.. code-block:: c + + // base named.conf file + // Recommended that you always maintain a change log in this file as shown here + // options clause defining the server-wide properties + options { + // all relative paths use this directory as a base + directory "/var"; + // version statement for security to avoid hacking known weaknesses + // if the real version number is revealed + version "not currently available"; + }; + + // logging clause + // log to /var/log/named/example.log all events from info UP in severity (no debug) + // uses 3 files in rotation swaps files when size reaches 250K + // failure messages that occur before logging is established are + // in syslog (/var/log/messages) + // + logging { + channel example_log { + // uses a relative path name and the directory statement to + // expand to /var/log/named/example.log + file "log/named/example.log" versions 3 size 250k; + // only log info and up messages - all others discarded + severity info; + }; + category default { + example_log; + }; + }; + +The :any:`logging` and :namedconf:ref:`options` blocks +and :any:`category`, :any:`channel`, +:any:`directory`, :any:`file`, and :any:`severity` +statements are all described further in the appropriate sections of this ARM. + +.. _base_zone_file: + +**example.com** base zone file +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The following is a complete zone file for the domain **example.com**, which +illustrates a number of common features. Comments in the file explain these +features where appropriate. Zone files consist of :ref:`Resource Records (RR) +<zone_file>`, which describe the zone's characteristics or properties. + +.. code-block:: + :linenos: + + ; base zone file for example.com + $TTL 2d ; default TTL for zone + $ORIGIN example.com. ; base domain-name + ; Start of Authority RR defining the key characteristics of the zone (domain) + @ IN SOA ns1.example.com. hostmaster.example.com. ( + 2003080800 ; serial number + 12h ; refresh + 15m ; update retry + 3w ; expiry + 2h ; minimum + ) + ; name server RR for the domain + IN NS ns1.example.com. + ; the second name server is external to this zone (domain) + IN NS ns2.example.net. + ; mail server RRs for the zone (domain) + 3w IN MX 10 mail.example.com. + ; the second mail servers is external to the zone (domain) + IN MX 20 mail.example.net. + ; domain hosts includes NS and MX records defined above + ; plus any others required + ; for instance a user query for the A RR of joe.example.com will + ; return the IPv4 address 192.168.254.6 from this zone file + ns1 IN A 192.168.254.2 + mail IN A 192.168.254.4 + joe IN A 192.168.254.6 + www IN A 192.168.254.7 + ; aliases ftp (ftp server) to an external domain + ftp IN CNAME ftp.example.net. + +This type of zone file is frequently referred to as a **forward-mapped zone +file**, since it maps domain names to some other value, while a +:ref:`reverse-mapped zone file<ipv4_reverse>` maps an IP address to a domain +name. The zone file is called **example.com** for no good reason except that +it is the domain name of the zone it describes; as always, users are free to +use whatever file-naming convention is appropriate to their needs. + +Other Zone Files +~~~~~~~~~~~~~~~~ + +Depending on the configuration additional zone files may or should be present. +Their format and functionality are briefly described here. + +localhost Zone File +~~~~~~~~~~~~~~~~~~~ + +All end-user systems are shipped with a ``hosts`` file (usually located in +/etc). This file is normally configured to map the name **localhost** (the name +used by applications when they run locally) to the loopback address. It is +argued, reasonably, that a forward-mapped zone file for **localhost** is +therefore not strictly required. This manual does use the BIND 9 distribution +file ``localhost-forward.db`` (normally in /etc/namedb/master or +/usr/local/etc/namedb/master) in all configuration samples for the following +reasons: + +1. Many users elect to delete the ``hosts`` file for security reasons (it is a + potential target of serious domain name redirection/poisoning attacks). + +2. Systems normally lookup any name (including domain names) using the + ``hosts`` file first (if present), followed by DNS. However, the + ``nsswitch.conf`` file (typically in /etc) controls this order (normally + **hosts: file dns**), allowing the order to be changed or the **file** value + to be deleted entirely depending on local needs. Unless the BIND + administrator controls this file and knows its values, it is unsafe to + assume that **localhost** is forward-mapped correctly. + +3. As a reminder to users that unnecessary queries for **localhost** form a + non-trivial volume of DNS queries on the public network, which affects DNS + performance for all users. + +Users may, however, elect at their discretion not to implement this file since, +depending on the operational environment, it may not be essential. + +The BIND 9 distribution file ``localhost-forward.db`` format is shown for +completeness and provides for both IPv4 and IPv6 localhost resolution. The zone +(domain) name is **localhost.** + +.. code-block:: + + $TTL 3h + localhost. SOA localhost. nobody.localhost. 42 1d 12h 1w 3h + NS localhost. + A 127.0.0.1 + AAAA ::1 + +.. NOTE:: Readers of a certain age or disposition may note the reference in this file to the late, + lamented Douglas Noel Adams. + +localhost Reverse-Mapped Zone File +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This zone file allows any query requesting the name associated with the +loopback IP (127.0.0.1). This file is required to prevent unnecessary queries +from reaching the public DNS hierarchy. The BIND 9 distribution file +``localhost.rev`` is shown for completeness: + +.. code-block:: + + $TTL 1D + @ IN SOA localhost. root.localhost. ( + 2007091701 ; serial + 30800 ; refresh + 7200 ; retry + 604800 ; expire + 300 ) ; minimum + IN NS localhost. + 1 IN PTR localhost. diff --git a/doc/arm/config-resolve.inc.rst b/doc/arm/config-resolve.inc.rst new file mode 100644 index 0000000..fcfa97e --- /dev/null +++ b/doc/arm/config-resolve.inc.rst @@ -0,0 +1,566 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _config_resolver_samples: + +Resolver (Caching Name Servers) +------------------------------- + +Resolvers handle :ref:`recursive user queries <recursive_query>` and provide +complete answers; that is, they issue one or more :ref:`iterative queries +<iterative_query>` to the DNS hierarchy. Having obtained a complete answer (or +an error), a resolver passes the answer to the user and places it in its cache. +Subsequent user requests for the same query will be answered from the +resolver's cache until the :term:`TTL` of the cached answer has expired, when +it will be flushed from the cache; the next user query that requests the same +information results in a new series of queries to the DNS hierarchy. + +Resolvers are frequently referred to by a bewildering variety of names, +including caching name servers, recursive name servers, forwarding resolvers, +area resolvers, and full-service resolvers. + +The following diagram shows how resolvers can function in a typical networked +environment: + +.. figure:: resolver-forward.png + :align: center + +Resolver and Forwarding Resolver + +1. End-user systems are all distributed with a local **stub resolver** as a + standard feature. Today, the majority of stub resolvers also provide a local + cache service to speed up user response times. + +2. A stub resolver has limited functionality; specifically, it cannot follow + :ref:`referrals<referral>`. When a stub resolver receives a request for a + name from a local program, such as a browser, and the answer is not in its + local cache, it sends a :ref:`recursive user query<recursive_query>` (1) to + a locally configured resolver (5), which may have the answer available in + its cache. If it does not, it issues :ref:`iterative + queries<iterative_query>` (2) to the DNS hierarchy to obtain the answer. The + resolver to which the local system sends the user query is configured, for + Linux and Unix hosts, in ``/etc/resolv.conf``; for Windows users it is + configured or changed via the Control Panel or Settings interface. + +3. Alternatively, the user query can be sent to a **forwarding resolver** (4). + Forwarding resolvers on first glance look fairly pointless, since they + appear to be acting as a simple pass-though and, like the stub resolver, + require a full-service resolver (5). However, forwarding resolvers can be + very powerful additions to a network for the following reasons: + + a) Cost and Performance. Each **recursive user query** (1) at the forwarding + resolver (4) results in two messages - the query and its answer. The resolver + (5) may have to issue three, four, or more query pairs (2) to get the required + answer. Traffic is reduced dramatically, increasing performance or reducing + cost (if the link is tariffed). Additionally, since the forwarding resolver is + typically shared across multiple hosts, its cache is more likely to contain + answers, again improving user performance. + + b) Network Maintenance. Forwarding resolvers (4) can be used to ease the burden + of local administration by providing a single point at which changes to remote + name servers can be managed, rather than having to update all hosts. Thus, all + hosts in a particular network section or area can be configured to point to a + forwarding resolver, which can be configured to stream DNS traffic as desired + and changed over time with minimal effort. + + c) Sanitizing Traffic. Especially in larger private networks it may be sensible + to stream DNS traffic using a forwarding resolver structure. The forwarding + resolver (4) may be configured, for example, to handle all in-domain traffic + (relatively safe) and forward all external traffic to a **hardened** resolver + (5). + + d) Stealth Networks. Forwarding resolvers are extensively used in :ref:`stealth + or split networks<split_dns_sample>`. + +4. Forwarding resolvers (4) can be configured to forward all traffic to a + resolver (5), or to only forward selective traffic (5) while directly + resolving other traffic (3). + +.. Attention:: While the diagram above shows **recursive user queries** + arriving via interface (1), there is nothing to stop them from arriving via + interface (2) via the public network. If no limits are placed on the source + IPs that can send such queries, the resolver is termed an **open resolver**. + Indeed, when the world was young this was the way things worked on the + Internet. Much has changed and what seems to be a friendly, generous action + can be used by rogue actors to cause all kinds of problems including + **Denial of Service (DoS)** attacks. Resolvers should always be configured + to limit the IP addresses that can use their services. BIND 9 provides a + number of statements and blocks to simplify defining these IP limits and + configuring a **closed resolver**. The resolver samples given here all + configure closed resolvers using a variety of techniques. + +Additional Zone Files +~~~~~~~~~~~~~~~~~~~~~ + +Root Servers (Hint) Zone File +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Resolvers (although not necessarily forwarding resolvers) need to access the +DNS hierarchy. To do this, they need to know the addresses (IPv4 and/or IPv6) +of the 13 :ref:`root servers<root_servers>`. This is done by the provision of a +root server zone file, which is contained in the standard BIND 9 distribution +as the file ``named.root`` (normally found in /etc/namedb or +/usr/local/namedb). This file may also be obtained from the IANA website +(https://www.iana.org/domains/root/files). + + + .. Note:: Many distributions rename this file for historical reasons. + Consult the appropriate distribution documentation for the actual file name. + + +The hint zone file is referenced using the :any:`type hint` statement and +a zone (domain) name of "." (the generally silent dot). + + .. Note:: The root server IP addresses have been stable for a number of + years and are likely to remain stable for the near future. BIND 9 has a + root-server list in its executable such that even if this file is omitted, + out-of-date, or corrupt BIND 9 can still function. For this reason, many + sample configurations omit the hints file. All the samples given here + include the hints file primarily as a reminder of the functionality of the + configuration, rather than as an absolute necessity. + +Private IP Reverse Map Zone Files +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Resolvers are configured to send :ref:`iterative queries<iterative_query>` to +the public DNS hierarchy when the information requested is not in their cache +or not defined in any local zone file. Many networks make extensive use of +private IP addresses (defined by :rfc:`1918`, :rfc:`2193`, :rfc:`5737`, and +:rfc:`6598`). By their nature these IP addresses are forward-mapped in various +user zone files. However, certain applications may issue **reverse map** +queries (mapping an IP address to a name). If the private IP addresses are not +defined in one or more reverse-mapped zone file(s), the resolver sends them to +the DNS hierarchy where they are simply useless traffic, slowing down DNS +responses for all users. + +Private IP addresses may be defined using standard :ref:`reverse-mapping +techniques<ipv4_reverse>` or using the +:any:`empty-zones-enable` statement. By +default this statement is set to ``empty-zones-enable yes;`` and thus automatically prevents +unnecessary DNS traffic by sending an NXDOMAIN error response (indicating the +name does not exist) to any request. However, some applications may require a +genuine answer to such reverse-mapped requests or they will fail to function. +Mail systems in particular perform reverse DNS queries as a first-line spam +check; in this case a reverse-mapped zone file is essential. The sample +configuration files given here for both the resolver and the forwarding +resolver provide a reverse-mapping zone file for the private IP address +192.168.254.4, which is the mail server address in the :ref:`base zone +file<base_zone_file>`, as an illustration of the reverse-map technique. The +file is named ``192.168.254.rev`` and has a zone name of +**254.168.192.in-addr.arpa**. + +.. code-block:: + + ; reverse map zone file for 192.168.254.4 only + $TTL 2d ; 172800 seconds + $ORIGIN 254.168.192.IN-ADDR.ARPA. + @ IN SOA ns1.example.com. hostmaster.example.com. ( + 2003080800 ; serial number + 3h ; refresh + 15m ; update retry + 3w ; expiry + 3h ; nx = nxdomain ttl + ) + ; only one NS is required for this local file + ; and is an out of zone name + IN NS ns1.example.com. + ; other IP addresses can be added as required + ; this maps 192.168.254.4 as shown + 4 IN PTR mail.example.com. ; fully qualified domain name (FQDN) + +.. _sample_resolver: + +Resolver Configuration +~~~~~~~~~~~~~~~~~~~~~~ + +The resolver provides :ref:`recursive query support<recursive_query>` to a defined set of IP addresses. +It is therefore a **closed** resolver and cannot be used in wider network attacks. + +.. code-block:: c + + // resolver named.conf file + // Two corporate subnets we wish to allow queries from + // defined in an acl clause + acl corpnets { + 192.168.4.0/24; + 192.168.7.0/24; + }; + + // options clause defining the server-wide properties + options { + // all relative paths use this directory as a base + directory "/var"; + // version statement for security to avoid hacking known weaknesses + // if the real version number is revealed + version "not currently available"; + // this is the default + recursion yes; + // recursive queries only allowed from these ips + // and references the acl clause + allow-query { corpnets; }; + // this ensures that any reverse map for private IPs + // not defined in a zone file will *not* be passed to the public network + // it is the default value + empty-zones-enable yes; + }; + + // logging clause + // log to /var/log/named/example.log all events from info UP in severity (no debug) + // uses 3 files in rotation swaps files when size reaches 250K + // failure messages that occur before logging is established are + // in syslog (/var/log/messages) + // + logging { + channel example_log { + // uses a relative path name and the directory statement to + // expand to /var/log/named/example.log + file "log/named/example.log" versions 3 size 250k; + // only log info and up messages - all others discarded + severity info; + }; + category default { + example_log; + }; + }; + + // zone file for the root servers + // discretionary zone (see root server discussion above) + zone "." { + type hint; + file "named.root"; + }; + + // zone file for the localhost forward map + // discretionary zone depending on hosts file (see discussion) + zone "localhost" { + type primary; + file "masters/localhost-forward.db"; + notify no; + }; + + // zone file for the loopback address + // necessary zone + zone "0.0.127.in-addr.arpa" { + type primary; + file "localhost.rev"; + notify no; + }; + + // zone file for local IP reverse map + // discretionary file depending on requirements + zone "254.168.192.in-addr.arpa" { + type primary; + file "192.168.254.rev"; + notify no; + }; + +The :any:`zone` and :any:`acl` blocks, and the +:any:`allow-query`, :any:`empty-zones-enable`, +:any:`file`, :namedconf:ref:`notify`, :any:`recursion`, and +:any:`type` statements are described in detail in the appropriate +sections. + +As a reminder, the configuration of this resolver does **not** access the DNS +hierarchy (does not use the public network) for any recursive query for which: + +1. The answer is already in the cache. + +2. The domain name is **localhost** (zone localhost). + +3. Is a reverse-map query for 127.0.0.1 (zone 0.0.127.in-addr.arpa). + +4. Is a reverse-map query for 192.168.254/24 (zone 254.168.192.in-addr.arpa). + +5. Is a reverse-map query for any local IP (:any:`empty-zones-enable` + statement). + +All other recursive queries will result in access to the DNS hierarchy to +resolve the query. + +.. _sample_forwarding: + +Forwarding Resolver Configuration +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This forwarding resolver configuration forwards all recursive queries, other +than those for the defined zones and those for which the answer is already in +its cache, to a full-service resolver at the IP address 192.168.250.3, with an +alternative at 192.168.230.27. The forwarding resolver will cache all responses +from these servers. The configuration is closed, in that it defines those IPs +from which it will accept recursive queries. + +A second configuration in which selective forwarding occurs :ref:`is also +provided<selective_forward_sample>`. + +.. code-block:: c + + // forwarding named.conf file + // Two corporate subnets we wish to allow queries from + // defined in an acl clause + acl corpnets { + 192.168.4.0/24; + 192.168.7.0/24; + }; + + // options clause defining the server-wide properties + options { + // all relative paths use this directory as a base + directory "/var"; + // version statement for security to avoid hacking known weaknesses + // if the real version number is revealed + version "not currently available"; + // this is the default + recursion yes; + // recursive queries only allowed from these ips + // and references the acl clause + allow-query { corpnets; }; + // this ensures that any reverse map for private IPs + // not defined in a zone file will *not* be passed to the public network + // it is the default value + empty-zones-enable yes; + // this defines the addresses of the resolvers to which queries will be forwarded + forwarders { + 192.168.250.3; + 192.168.230.27; + }; + // indicates all queries will be forwarded other than for defined zones + forward only; + }; + + // logging clause + // log to /var/log/named/example.log all events from info UP in severity (no debug) + // uses 3 files in rotation swaps files when size reaches 250K + // failure messages that occur before logging is established are + // in syslog (/var/log/messages) + // + logging { + channel example_log { + // uses a relative path name and the directory statement to + // expand to /var/log/named/example.log + file "log/named/example.log" versions 3 size 250k; + // only log info and up messages - all others discarded + severity info; + }; + category default { + example_log; + }; + }; + + // hints zone file is not required + + // zone file for the localhost forward map + // discretionary zone depending on hosts file (see discussion) + zone "localhost" { + type primary; + file "masters/localhost-forward.db"; + notify no; + }; + + // zone file for the loopback address + // necessary zone + zone "0.0.127.in-addr.arpa" { + type primary; + file "localhost.rev"; + notify no; + }; + + // zone file for local IP reverse map + // discretionary file depending on requirements + zone "254.168.192.in-addr.arpa" { + type primary; + file "192.168.254.rev"; + notify no; + }; + +The :any:`zone` and :any:`acl` blocks, and the +:any:`allow-query`, :any:`empty-zones-enable`, +:any:`file`, :any:`forward`, :any:`forwarders`, +:namedconf:ref:`notify`, :any:`recursion`, and :any:`type` +statements are described in detail in the appropriate sections. + +As a reminder, the configuration of this forwarding resolver does **not** +forward any recursive query for which: + +1. The answer is already in the cache. + +2. The domain name is **localhost** (zone localhost). + +3. Is a reverse-map query for 127.0.0.1 (zone 0.0.127.in-addr.arpa). + +4. Is a reverse-map query for 192.168.254/24 (zone 254.168.192.in-addr.arpa). + +5. Is a reverse-map query for any local IP (:any:`empty-zones-enable` statement). + +All other recursive queries will be forwarded to resolve the query. + +.. _selective_forward_sample: + +Selective Forwarding Resolver Configuration +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This forwarding resolver configuration only forwards recursive queries for the +zone **example.com** to the resolvers at 192.168.250.3 and 192.168.230.27. All +other recursive queries, other than those for the defined zones and those for +which the answer is already in its cache, are handled by this resolver. The +forwarding resolver will cache all responses from both the public network and +from the forwarded resolvers. The configuration is closed, in that it defines +those IPs from which it will accept recursive queries. + +.. code-block:: c + + // selective forwarding named.conf file + // Two corporate subnets we wish to allow queries from + // defined in an acl clause + acl corpnets { + 192.168.4.0/24; + 192.168.7.0/24; + }; + + // options clause defining the server-wide properties + options { + // all relative paths use this directory as a base + directory "/var"; + // version statement for security to avoid hacking known weaknesses + // if the real version number is revealed + version "not currently available"; + // this is the default + recursion yes; + // recursive queries only allowed from these ips + // and references the acl clause + allow-query { corpnets; }; + // this ensures that any reverse map for private IPs + // not defined in a zone file will *not* be passed to the public network + // it is the default value + empty-zones-enable yes; + + // forwarding is not global but selective by zone in this configuration + }; + + // logging clause + // log to /var/log/named/example.log all events from info UP in severity (no debug) + // uses 3 files in rotation swaps files when size reaches 250K + // failure messages that occur before logging is established are + // in syslog (/var/log/messages) + // + logging { + channel example_log { + // uses a relative path name and the directory statement to + // expand to /var/log/named/example.log + file "log/named/example.log" versions 3 size 250k; + // only log info and up messages - all others discarded + severity info; + }; + category default { + example_log; + }; + }; + + // zone file for the root servers + // discretionary zone (see root server discussion above) + zone "." { + type hint; + file "named.root"; + }; + + // zone file for the localhost forward map + // discretionary zone depending on hosts file (see discussion) + zone "localhost" { + type primary; + file "masters/localhost-forward.db"; + notify no; + }; + + // zone file for the loopback address + // necessary zone + zone "0.0.127.in-addr.arpa" { + type primary; + file "localhost.rev"; + notify no; + }; + + // zone file for local IP reverse map + // discretionary file depending on requirements + zone "254.168.192.in-addr.arpa" { + type primary; + file "192.168.254.rev"; + notify no; + }; + // zone file forwarded example.com + zone "example.com" { + type forward; + // this defines the addresses of the resolvers to + // which queries for this zone will be forwarded + forwarders { + 192.168.250.3; + 192.168.230.27; + }; + // indicates all queries for this zone will be forwarded + forward only; + }; + + +The :any:`zone` and :any:`acl` blocks, and the +:any:`allow-query`, :any:`empty-zones-enable`, +:any:`file`, :any:`forward`, :any:`forwarders`, +:namedconf:ref:`notify`, :any:`recursion`, and :any:`type` +statements are described in detail in the appropriate sections. + +As a reminder, the configuration of this resolver does **not** access the DNS +hierarchy (does not use the public network) for any recursive query for which: + +1. The answer is already in the cache. + +2. The domain name is **localhost** (zone localhost). + +3. Is a reverse-map query for 127.0.0.1 (zone 0.0.127.in-addr.arpa). + +4. Is a reverse-map query for 192.168.254/24 (zone 254.168.192.in-addr.arpa). + +5. Is a reverse-map query for any local IP (empty-zones-enable statement). + +6. Is a query for the domain name **example.com**, in which case it will be + forwarded to either 192.168.250.3 or 192.168.230.27 (zone example.com). + +All other recursive queries will result in access to the DNS hierarchy to +resolve the query. + +.. _load_balancing: + +Load Balancing +-------------- + +A primitive form of load balancing can be achieved in the DNS by using multiple +resource records (RRs) in a :ref:`zone file<zone_file>` (such as multiple A +records) for one name. + +For example, assuming three HTTP servers with network addresses of +10.0.0.1, 10.0.0.2, and 10.0.0.3, a set of records such as the following +means that clients will connect to each machine one-third of the time: + ++-----------+------+----------+----------+----------------------------+ +| Name | TTL | CLASS | TYPE | Resource Record (RR) Data | ++-----------+------+----------+----------+----------------------------+ +| www | 600 | IN | A | 10.0.0.1 | ++-----------+------+----------+----------+----------------------------+ +| | 600 | IN | A | 10.0.0.2 | ++-----------+------+----------+----------+----------------------------+ +| | 600 | IN | A | 10.0.0.3 | ++-----------+------+----------+----------+----------------------------+ + +When a resolver queries for these records, BIND rotates them and +responds to the query with the records in a random order. In the +example above, clients randomly receive records in the order 1, 2, +3; 2, 3, 1; and 3, 1, 2. Most clients use the first record returned +and discard the rest. + +For more detail on ordering responses, refer to the +:ref:`rrset-order<rrset_ordering>` statement in the +:namedconf:ref:`options` block. diff --git a/doc/arm/dlz.inc.rst b/doc/arm/dlz.inc.rst new file mode 100644 index 0000000..b6f7473 --- /dev/null +++ b/doc/arm/dlz.inc.rst @@ -0,0 +1,129 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _dlz-info: + +Dynamically Loadable Zones (DLZ) +-------------------------------- + +Dynamically Loadable Zones (DLZ) are an extension to BIND 9 that allows +zone data to be retrieved directly from an external database. There is +no required format or schema. DLZ modules exist for several different +database backends, including MySQL and LDAP, and can be +written for any other. + +The DLZ module provides data to :iscman:`named` in text +format, which is then converted to DNS wire format by :iscman:`named`. This +conversion, and the lack of any internal caching, places significant +limits on the query performance of DLZ modules. Consequently, DLZ is not +recommended for use on high-volume servers. However, it can be used in a +hidden primary configuration, with secondaries retrieving zone updates via +AXFR. Note, however, that DLZ has no built-in support for DNS notify; +secondary servers are not automatically informed of changes to the zones in the +database. + +Configuring DLZ +~~~~~~~~~~~~~~~ +.. namedconf:statement:: dlz + :tags: zone + :short: Configures a Dynamically Loadable Zone (DLZ) database in :iscman:`named.conf`. + +A DLZ database is configured with a :any:`dlz` statement in :iscman:`named.conf`: + +:: + + dlz example { + database "dlopen driver.so args"; + search yes; + }; + + +This specifies a DLZ module to search when answering queries; the module +is implemented in ``driver.so`` and is loaded at runtime by the dlopen +DLZ driver. Multiple :any:`dlz` statements can be specified. + + +.. namedconf:statement:: search + :tags: query + :short: Specifies whether a Dynamically Loadable Zone (DLZ) module is queried for an answer to a query name. + +When answering a query, all DLZ modules with :namedconf:ref:`search` set to ``yes`` are +queried to see whether they contain an answer for the query name. The best +available answer is returned to the client. + +The :namedconf:ref:`search` option in the above example can be omitted, because +``yes`` is the default value. + +If :namedconf:ref:`search` is set to ``no``, this DLZ module is *not* searched +for the best match when a query is received. Instead, zones in this DLZ +must be separately specified in a zone statement. This allows users to +configure a zone normally using standard zone-option semantics, but +specify a different database backend for storage of the zone's data. +For example, to implement NXDOMAIN redirection using a DLZ module for +backend storage of redirection rules: + +:: + + dlz other { + database "dlopen driver.so args"; + search no; + }; + + zone "." { + type redirect; + dlz other; + }; + + +Sample DLZ Module +~~~~~~~~~~~~~~~~~ + +For guidance in the implementation of DLZ modules, the directory +``contrib/dlz/example`` contains a basic dynamically linkable DLZ +module - i.e., one which can be loaded at runtime by the "dlopen" DLZ +driver. The example sets up a single zone, whose name is passed to the +module as an argument in the :any:`dlz` statement: + +:: + + dlz other { + database "dlopen driver.so example.nil"; + }; + + +In the above example, the module is configured to create a zone +"example.nil", which can answer queries and AXFR requests and accept +DDNS updates. At runtime, prior to any updates, the zone contains an +SOA, NS, and a single A record at the apex: + +:: + + example.nil. 3600 IN SOA example.nil. hostmaster.example.nil. ( + 123 900 600 86400 3600 + ) + example.nil. 3600 IN NS example.nil. + example.nil. 1800 IN A 10.53.0.1 + + +The sample driver can retrieve information about the +querying client and alter its response on the basis of this +information. To demonstrate this feature, the example driver responds to +queries for "source-addr.``zonename``>/TXT" with the source address of +the query. Note, however, that this record will *not* be included in +AXFR or ANY responses. Normally, this feature is used to alter +responses in some other fashion, e.g., by providing different address +records for a particular name depending on the network from which the +query arrived. + +Documentation of the DLZ module API can be found in +``contrib/dlz/example/README``. This directory also contains the header +file ``dlz_minimal.h``, which defines the API and should be included by +any dynamically linkable DLZ module. diff --git a/doc/arm/dns-ops.inc.rst b/doc/arm/dns-ops.inc.rst new file mode 100644 index 0000000..abb6bcf --- /dev/null +++ b/doc/arm/dns-ops.inc.rst @@ -0,0 +1,243 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _ns_operations: + +Name Server Operations +---------------------- + +.. _tools: + +Tools for Use With the Name Server Daemon +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This section describes several indispensable diagnostic, administrative, +and monitoring tools available to the system administrator for +controlling and debugging the name server daemon. + +.. _diagnostic_tools: + +Diagnostic Tools +^^^^^^^^^^^^^^^^ + +The :iscman:`dig`, :iscman:`host`, and :iscman:`nslookup` programs are all command-line +tools for manually querying name servers. They differ in style and +output format. + +:iscman:`dig` + :iscman:`dig` is the most versatile and complete of these lookup tools. It + has two modes: simple interactive mode for a single query, and batch + mode, which executes a query for each in a list of several query + lines. All query options are accessible from the command line. + + For more information and a list of available commands and options, + see :ref:`man_dig`. + +:iscman:`host` + The :iscman:`host` utility emphasizes simplicity and ease of use. By + default, it converts between host names and Internet addresses, but + its functionality can be extended with the use of options. + + For more information and a list of available commands and options, + see :ref:`man_host`. + +:iscman:`nslookup` + :iscman:`nslookup` has two modes: interactive and non-interactive. + Interactive mode allows the user to query name servers for + information about various hosts and domains, or to print a list of + hosts in a domain. Non-interactive mode is used to print just the + name and requested information for a host or domain. + + Due to its arcane user interface and frequently inconsistent + behavior, we do not recommend the use of :iscman:`nslookup`. Use :iscman:`dig` + instead. + +.. _admin_tools: + +Administrative Tools +^^^^^^^^^^^^^^^^^^^^ + +Administrative tools play an integral part in the management of a +server. + +:iscman:`named-checkconf` + The :iscman:`named-checkconf` program checks the syntax of a :iscman:`named.conf` + file. + + For more information and a list of available commands and options, + see :ref:`man_named-checkconf`. + +:iscman:`named-checkzone` + The :iscman:`named-checkzone` program checks a zone file for syntax and + consistency. + + For more information and a list of available commands and options, + see :ref:`man_named-checkzone`. + +:iscman:`named-compilezone` + This tool is similar to :iscman:`named-checkzone` but it always dumps the zone content + to a specified file (typically in a different format). + + For more information and a list of available commands and options, + see :ref:`man_named-compilezone`. + +.. _ops_rndc: + +:iscman:`rndc` + The remote name daemon control (:iscman:`rndc`) program allows the system + administrator to control the operation of a name server. + + See :ref:`man_rndc` for details of the available :iscman:`rndc` + commands. + + :iscman:`rndc` requires a configuration file, since all communication with + the server is authenticated with digital signatures that rely on a + shared secret, and there is no way to provide that secret other than + with a configuration file. The default location for the :iscman:`rndc` + configuration file is |rndc_conf|, but an alternate location + can be specified with the :option:`-c <rndc -c>` option. If the configuration file is + not found, :iscman:`rndc` also looks in |rndc_key| (or whatever + ``sysconfdir`` was defined when the BIND build was configured). The + ``rndc.key`` file is generated by running :option:`rndc-confgen -a` as + described in :any:`controls`. + + The format of the configuration file is similar to that of + :iscman:`named.conf`, but is limited to only three blocks: the :rndcconf:ref:`options`, + :rndcconf:ref:`key`, :rndcconf:ref:`server`, and the :ref:`include_grammar`. These blocks are + what associate the secret keys to the servers with which they are + meant to be shared. The order of blocks is not significant. + +.. rndcconf:statement:: options + + .. rndcconf:statement:: default-server + + :any:`default-server` takes a + host name or address argument and represents the server that is + contacted if no :option:`-s <rndc -s>` option is provided on the command line. + + .. rndcconf:statement:: default-key + + :any:`default-key` takes the name of a key as its argument, as defined + by a :rndcconf:ref:`key` block. + + .. rndcconf:statement:: default-port + + :any:`default-port` specifies the port to which + :iscman:`rndc` should connect if no port is given on the command line or in + a :rndcconf:ref:`server` block. + + .. rndcconf:statement:: default-source-address + .. rndcconf:statement:: default-source-address-v6 + + :any:`default-source-address` and :any:`default-source-address-v6` specify + the IPv4 and IPv6 source address used to communicate with the server + if no address is given on the command line or in a + :rndcconf:ref:`server` block. + +.. rndcconf:statement:: key + + The :rndcconf:ref:`key` block defines a key to be used by :iscman:`rndc` when + authenticating with :iscman:`named`. Its syntax is identical to the :namedconf:ref:`key` + statement in :iscman:`named.conf`. The keyword :rndcconf:ref:`key` is followed by a key + name, which must be a valid domain name, though it need not actually + be hierarchical; thus, a string like ``rndc_key`` is a valid name. + The :rndcconf:ref:`key` block has two statements: :rndcconf:ref:`algorithm` and :rndcconf:ref:`secret`. + + .. rndcconf:statement:: algorithm + + While the configuration parser accepts any string as the argument + to :rndcconf:ref:`algorithm`, currently only the strings ``hmac-md5``, + ``hmac-sha1``, ``hmac-sha224``, ``hmac-sha256``, + ``hmac-sha384``, and ``hmac-sha512`` have any meaning. + + .. rndcconf:statement:: secret + + The secret + is a Base64-encoded string as specified in :rfc:`3548`. + +.. rndcconf:statement:: server + + The :rndcconf:ref:`server` block specifies connection parameters for a given server. + The server can be specified as a host name or address. + + .. rndcconf:statement:: addresses + + Specifies one or more addresses to use when communicating with this + server. + + :rndcconf:ref:`key` + Associates a key defined using the :rndcconf:ref:`key` statement with a + server. + + .. rndcconf:statement:: port + + Specifes the port :iscman:`rndc` should connect to on the server. + + .. rndcconf:statement:: source-address + .. rndcconf:statement:: source-address-v6 + + Overrides :rndcconf:ref:`default-source-address` and + :rndcconf:ref:`default-source-address-v6` for this specific server. + + A sample minimal configuration file is as follows: + + :: + + key rndc_key { + algorithm "hmac-sha256"; + secret + "c3Ryb25nIGVub3VnaCBmb3IgYSBtYW4gYnV0IG1hZGUgZm9yIGEgd29tYW4K"; + }; + options { + default-server 127.0.0.1; + default-key rndc_key; + }; + + This file, if installed as |rndc_conf|, allows the + command: + + :option:`rndc reload` + + to connect to 127.0.0.1 port 953 and causes the name server to reload, + if a name server on the local machine is running with the following + controls statements: + + :: + + controls { + inet 127.0.0.1 + allow { localhost; } keys { rndc_key; }; + }; + + and it has an identical key block for ``rndc_key``. + + Running the :iscman:`rndc-confgen` program conveniently creates an + :iscman:`rndc.conf` file, and also displays the corresponding + :any:`controls` statement needed to add to :iscman:`named.conf`. + Alternatively, it is possible to run :option:`rndc-confgen -a` to set up an + ``rndc.key`` file and not modify :iscman:`named.conf` at all. + +Signals +~~~~~~~ + +Certain Unix signals cause the name server to take specific actions, as +described in the following table. These signals can be sent using the +``kill`` command. + ++--------------+-------------------------------------------------------------+ +| ``SIGHUP`` | Causes the server to read :iscman:`named.conf` and reload | +| | the database. | ++--------------+-------------------------------------------------------------+ +| ``SIGTERM`` | Causes the server to clean up and exit. | ++--------------+-------------------------------------------------------------+ +| ``SIGINT`` | Causes the server to clean up and exit. | ++--------------+-------------------------------------------------------------+ + diff --git a/doc/arm/dns-security-overview.dia b/doc/arm/dns-security-overview.dia Binary files differnew file mode 100644 index 0000000..77f00f3 --- /dev/null +++ b/doc/arm/dns-security-overview.dia diff --git a/doc/arm/dns-security-overview.png b/doc/arm/dns-security-overview.png Binary files differnew file mode 100644 index 0000000..28e9220 --- /dev/null +++ b/doc/arm/dns-security-overview.png diff --git a/doc/arm/dns-servers.dia b/doc/arm/dns-servers.dia Binary files differnew file mode 100644 index 0000000..caabefe --- /dev/null +++ b/doc/arm/dns-servers.dia diff --git a/doc/arm/dns-servers.png b/doc/arm/dns-servers.png Binary files differnew file mode 100644 index 0000000..14a7bea --- /dev/null +++ b/doc/arm/dns-servers.png diff --git a/doc/arm/dns-tree.dia b/doc/arm/dns-tree.dia Binary files differnew file mode 100644 index 0000000..052e7ee --- /dev/null +++ b/doc/arm/dns-tree.dia diff --git a/doc/arm/dns-tree.png b/doc/arm/dns-tree.png Binary files differnew file mode 100644 index 0000000..c76ae1b --- /dev/null +++ b/doc/arm/dns-tree.png diff --git a/doc/arm/dnssec-guide.rst b/doc/arm/dnssec-guide.rst new file mode 100644 index 0000000..c3a9a0a --- /dev/null +++ b/doc/arm/dnssec-guide.rst @@ -0,0 +1,25 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _dnssec_guide: + +DNSSEC Guide +============ + +.. include:: ../dnssec-guide/preface.rst +.. include:: ../dnssec-guide/introduction.rst +.. include:: ../dnssec-guide/getting-started.rst +.. include:: ../dnssec-guide/validation.rst +.. include:: ../dnssec-guide/signing.rst +.. include:: ../dnssec-guide/troubleshooting.rst +.. include:: ../dnssec-guide/advanced-discussions.rst +.. include:: ../dnssec-guide/recipes.rst +.. include:: ../dnssec-guide/commonly-asked-questions.rst diff --git a/doc/arm/dnssec.inc.rst b/doc/arm/dnssec.inc.rst new file mode 100644 index 0000000..c48bab1 --- /dev/null +++ b/doc/arm/dnssec.inc.rst @@ -0,0 +1,520 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _dnssec: + +DNSSEC +------ +DNS Security Extensions (DNSSEC) provide reliable protection from +`cache poisoning`_ attacks. At the same time these extensions also provide other benefits: +they limit the impact of `random subdomain attacks`_ on resolver caches and authoritative +servers, and provide the foundation for modern applications like `authenticated +and private e-mail transfer`_. + +To achieve this goal, DNSSEC adds `digital signatures`_ to DNS records in +authoritative DNS zones, and DNS resolvers verify the validity of the signatures on the +received records. If the signatures match the received data, the resolver can +be sure that the data was not modified in transit. + +.. note:: + DNSSEC and transport-level encryption are complementary! + Unlike typical transport-level encryption like DNS-over-TLS, DNS-over-HTTPS, + or VPN, DNSSEC makes DNS records verifiable at all points of the DNS + resolution chain. + +This section focuses on ways to deploy DNSSEC using BIND. For a more in-depth +discussion of DNSSEC principles (e.g. :ref:`how_does_dnssec_change_dns_lookup`) +please see :doc:`dnssec-guide`. + +.. _`cache poisoning`: https://en.wikipedia.org/wiki/DNS_cache_poisoning +.. _`random subdomain attacks`: https://www.isc.org/blogs/nsec-caching-should-limit-excessive-queries-to-dns-root/ +.. _`digital signatures`: https://en.wikipedia.org/wiki/Digital_signature +.. _`authenticated and private e-mail transfer`: https://github.com/internetstandards/toolbox-wiki/blob/main/DANE-for-SMTP-how-to.md + + +.. _dnssec_zone_signing: + +Zone Signing +~~~~~~~~~~~~ + +BIND offers several ways to generate signatures and maintain their validity +during the lifetime of a DNS zone: + + - :ref:`dnssec_kasp` - **strongly recommended** + - :ref:`dnssec_dynamic_zones` - only for special needs + - :ref:`dnssec_tools` - discouraged, use only for debugging + +.. _zone_keys: + +Zone keys +^^^^^^^^^ +Regardless of the :ref:`zone-signing <dnssec_zone_signing>` method in use, cryptographic keys are +stored in files named like :file:`Kdnssec.example.+013+12345.key` and +:file:`Kdnssec.example.+013+12345.private`. +The private key (in the ``.private`` file) is used to generate signatures, and +the public key (in the ``.key`` file) is used for signature verification. +Additionally, the :ref:`dnssec_kasp` method creates a third file, +:file:`Kdnssec.example+013+12345.state`, which is used to track DNSSEC key timings +and to perform key rollovers safely. + +These filenames contain: + + - the key name, which always matches the zone name (``dnssec.example.``), + - the `algorithm number`_ (013 is ECDSAP256SHA256, 008 is RSASHA256, etc.), + - and the key tag, i.e. a non-unique key identifier (12345 in this case). + +.. _`algorithm number`: https://www.iana.org/assignments/dns-sec-alg-numbers/dns-sec-alg-numbers.xhtml#dns-sec-alg-numbers-1 + + +.. warning:: + Private keys are required for full disaster recovery. Back up key files in a + safe location and protect them from unauthorized access. Anyone with + access to the private key can create fake but seemingly valid DNS data. + + +.. _dnssec_kasp: + +Fully Automated (Key and Signing Policy) +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Key and Signing Policy (KASP) is a method of configuration that describes +how to maintain DNSSEC signing keys and how to sign the zone. + +This is the recommended, fully automated way to sign and maintain DNS zones. For +most use cases users can simply use the built-in default policy, which applies +up-to-date DNSSEC practices: + +.. code-block:: none + :emphasize-lines: 4 + + zone "dnssec.example" { + type primary; + file "dnssec.example.db"; + dnssec-policy default; + inline-signing yes; + }; + +The :any:`dnssec-policy` statement requires dynamic DNS to be set up, or +:any:`inline-signing` to be enabled. In the example above we use the latter. + +This is sufficient to create the necessary signing keys, and generate +``DNSKEY``, ``RRSIG``, and ``NSEC`` records for the zone. BIND also takes +care of any DNSSEC maintenance for this zone, including replacing signatures +that are about to expire and managing :ref:`key_rollovers`. + +.. note:: + :any:`dnssec-policy` needs write access to the zone. Please see + :any:`dnssec-policy` for more details about implications for zone storage. + +The default policy creates one key that is used to sign the complete zone, +and uses ``NSEC`` to enable authenticated denial of existence (a secure way +to tell which records do not exist in a zone). This policy is recommended +and typically does not need to be changed. + +If needed, a custom policy can be defined by adding a :any:`dnssec-policy` statement +into the configuration: + +.. code-block:: none + + + dnssec-policy "custom" { + dnskey-ttl 600; + keys { + ksk lifetime P1Y algorithm ecdsap384sha384; + zsk lifetime 60d algorithm ecdsap384sha384; + }; + nsec3param iterations 0 optout no salt-length 0; + }; + +This ``custom`` policy, for example: + + - uses a very short ``DNSKEY`` TTL (600 seconds), + - uses two keys to sign the zone: a Key Signing Key (KSK) to sign the key + related RRsets (``DNSKEY``, ``CDS``, and ``CDNSKEY``), and a Zone Signing + Key (ZSK) to sign the rest of the zone. The KSK is automatically + rotated after one year and the ZSK after 60 days. + +Also: + - The configured keys have a lifetime set and use the ECDSAP384SHA384 + algorithm. + - The last line instructs BIND to generate NSEC3 records for + :ref:`Proof of Non-Existence <advanced_discussions_proof_of_nonexistence>`, + using zero extra iterations and no salt. NSEC3 opt-out is disabled, meaning + insecure delegations also get an NSEC3 record. + +For more information about KASP configuration see :any:`dnssec-policy`. + +The :ref:`dnssec_advanced_discussions` section in the DNSSEC Guide discusses the +various policy settings and may be useful for determining values for specific +needs. + +Key Rollover +============ + +When using a :any:`dnssec-policy`, a key lifetime can be set to trigger +key rollovers. ZSK rollovers are fully automatic, but for KSK and CSK rollovers +a DS record needs to be submitted to the parent. See +:ref:`secure_delegation` for possible ways to do so. + +Once the DS is in the parent (and the DS of the predecessor key is withdrawn), +BIND needs to be told that this event has happened. This can be done automatically +by configuring parental agents: + +.. code-block:: none + :emphasize-lines: 5 + + zone "dnssec.example" { + type primary; + file "dnssec.example.db"; + dnssec-policy default; + inline-signing yes; + parental-agents { 192.0.2.1; }; + }; + +Here one server, ``192.0.2.1``, is configured for BIND to send DS queries to, +to check the DS RRset for ``dnssec-example`` during key rollovers. This needs +to be a trusted server, because BIND does not validate the response. + +If setting up a parental agent is undesirable, it is also possible to tell BIND that the +DS is published in the parent with: +:option:`rndc dnssec -checkds -key 12345 published dnssec.example. <rndc dnssec>`. +and the DS for the predecessor key has been removed with: +:option:`rndc dnssec -checkds -key 54321 withdrawn dnssec.example. <rndc dnssec>`. +where 12345 and 54321 are the key tags of the successor and predecessor key, +respectively. + +To roll a key sooner than scheduled, or to roll a key that +has an unlimited lifetime, use: +:option:`rndc dnssec -rollover -key 12345 dnssec.example. <rndc dnssec>`. + +To revert a signed zone back to an insecure zone, change +the zone configuration to use the built-in "insecure" policy. Detailed +instructions are described in :ref:`revert_to_unsigned`. + +.. _dnssec_dynamic_zones: + +Manual Key Management +^^^^^^^^^^^^^^^^^^^^^ + +.. warning:: + The method described here allows full control over the keys used to sign + the zone. This is required only for very special cases and is generally + discouraged. Under normal circumstances, please use :ref:`dnssec_kasp`. + + +.. _dnssec_dynamic_zones_multisigner_model: + +Multi-Signer Model +================== + +Dynamic zones provide the ability to sign a zone by multiple providers, meaning +each provider signs and serves the same zone independently. Such a setup requires +some coordination between providers when it comes to key rollovers, and may be +better suited to be configured with ``auto-dnssec allow;``. This permits keys to +be updated and the zone to be re-signed only if the user issues the command +:option:`rndc sign zonename <rndc sign>`. + +A zone can also be configured with ``auto-dnssec maintain``, which automatically +adjusts the zone's DNSSEC keys on a schedule according to the key timing +metadata. However, keys still need to be generated separately, for +example with :iscman:`dnssec-keygen`. + +Of course, dynamic zones can also use :any:`dnssec-policy` to fully automate DNSSEC +maintenance. The next sections assume that more key +management control is needed, and describe how to use dynamic DNS update to perform +various DNSSEC operations. + +.. _dnssec_dynamic_zones_enabling_dnssec: + +Enabling DNSSEC Manually +======================== +As an alternative to fully automated zone signing using :ref:`dnssec-policy +<dnssec_kasp>`, a zone can be changed from insecure to secure using a dynamic +DNS update. :iscman:`named` must be configured so that it can see the ``K*`` +files which contain the public and private parts of the `zone keys`_ that are +used to sign the zone. Key files should be placed in the :any:`key-directory`, as +specified in :iscman:`named.conf`: + +:: + + zone update.example { + type primary; + update-policy local; + auto-dnssec allow; + file "dynamic/update.example.db"; + key-directory "keys/update.example/"; + }; + +If there are both a KSK and a ZSK available (or a CSK), this configuration causes the +zone to be signed. An ``NSEC`` chain is generated as part of the initial signing +process. + +In any secure zone which supports dynamic updates, :iscman:`named` periodically +re-signs RRsets which have not been re-signed as a result of some update action. +The signature lifetimes are adjusted to spread the re-sign load over time rather +than all at once. + +.. _dnssec_dynamic_zones_publishing_dnskey_records: + +Publishing DNSKEY Records +========================= + +To insert the keys via dynamic update: + +:: + + % nsupdate + > ttl 3600 + > update add update.example DNSKEY 256 3 7 AwEAAZn17pUF0KpbPA2c7Gz76Vb18v0teKT3EyAGfBfL8eQ8al35zz3Y I1m/SAQBxIqMfLtIwqWPdgthsu36azGQAX8= + > update add update.example DNSKEY 257 3 7 AwEAAd/7odU/64o2LGsifbLtQmtO8dFDtTAZXSX2+X3e/UNlq9IHq3Y0 XtC0Iuawl/qkaKVxXe2lo8Ct+dM6UehyCqk= + > send + +In order to sign with these keys, the corresponding key files should also be +placed in the :any:`key-directory`. + +.. _dnssec_dynamic_zones_nsec3: + +NSEC3 +===== + +To sign using :ref:`NSEC3 <advanced_discussions_nsec3>` instead of :ref:`NSEC +<advanced_discussions_nsec>`, add an NSEC3PARAM record to the initial update +request. The :term:`OPTOUT <Opt-out>` bit in the NSEC3 +chain can be set in the flags field of the +NSEC3PARAM record. + +:: + + % nsupdate + > ttl 3600 + > update add update.example DNSKEY 256 3 7 AwEAAZn17pUF0KpbPA2c7Gz76Vb18v0teKT3EyAGfBfL8eQ8al35zz3Y I1m/SAQBxIqMfLtIwqWPdgthsu36azGQAX8= + > update add update.example DNSKEY 257 3 7 AwEAAd/7odU/64o2LGsifbLtQmtO8dFDtTAZXSX2+X3e/UNlq9IHq3Y0 XtC0Iuawl/qkaKVxXe2lo8Ct+dM6UehyCqk= + > update add update.example NSEC3PARAM 1 0 0 - + > send + +Note that the ``NSEC3PARAM`` record does not show up until :iscman:`named` has +had a chance to build/remove the relevant chain. A private type record is +created to record the state of the operation (see below for more details), and +is removed once the operation completes. + +The ``NSEC3`` chain is generated and the ``NSEC3PARAM`` record is added before +the ``NSEC`` chain is destroyed. + +While the initial signing and ``NSEC``/``NSEC3`` chain generation are occurring, +other updates are possible as well. + +A new ``NSEC3PARAM`` record can be added via dynamic update. When the new +``NSEC3`` chain has been generated, the ``NSEC3PARAM`` flag field is set to +zero. At that point, the old ``NSEC3PARAM`` record can be removed. The old +chain is removed after the update request completes. + +:iscman:`named` only supports creating new ``NSEC3`` chains where all the +``NSEC3`` records in the zone have the same ``OPTOUT`` state. :iscman:`named` +supports updates to zones where the ``NSEC3`` records in the chain have mixed +``OPTOUT`` state. :iscman:`named` does not support changing the ``OPTOUT`` +state of an individual ``NSEC3`` record; if the ``OPTOUT`` state of an +individual ``NSEC3`` needs to be changed, the entire chain must be changed. + +To switch back to ``NSEC``, use :iscman:`nsupdate` to remove any ``NSEC3PARAM`` +records. The ``NSEC`` chain is generated before the ``NSEC3`` chain is removed. + +.. _dnssec_dynamic_zones_dnskey_rollovers: + +DNSKEY Rollovers +================ + +To perform key rollovers via a dynamic update, the ``K*`` files for the new keys +must be added so that :iscman:`named` can find them. The new ``DNSKEY`` RRs can +then be added via dynamic update. When the zones are being signed, they are +signed with the new key set; when the signing is complete, the private type +records are updated so that the last octet is non-zero. + +If this is for a KSK, the parent and any trust anchor repositories of the new +KSK must be informed. + +The maximum TTL in the zone must expire before removing the old ``DNSKEY``. If +it is a KSK that is being updated, the DS RRset in the parent must also be +updated and its TTL allowed to expire. This ensures that all clients are able to +verify at least one signature when the old ``DNSKEY`` is removed. + +The old ``DNSKEY`` can be removed via ``UPDATE``, taking care to specify the +correct key. :iscman:`named` cleans out any signatures generated by the old +key after the update completes. + +.. _dnssec_dynamic_zones_going_insecure: + +Going Insecure +============== + +To convert a signed zone to unsigned using dynamic DNS, delete all the +``DNSKEY`` records from the zone apex using :iscman:`nsupdate`. All signatures, +``NSEC`` or ``NSEC3`` chains, and associated ``NSEC3PARAM`` records are removed +automatically when the zone is supposed to be re-signed. + +This requires the :any:`dnssec-secure-to-insecure` option to be set to ``yes`` in +:iscman:`named.conf`. + +In addition, if the ``auto-dnssec maintain`` or a :any:`dnssec-policy` is used, it +should be removed or changed to ``allow`` instead; otherwise it will re-sign. + +.. _dnssec_tools: + +Manual Signing +^^^^^^^^^^^^^^ + +There are several tools available to manually sign a zone. + +.. warning:: + + Please note manual procedures are available mainly for backwards + compatibility and should be used only by expert users with specific needs. + +To set up a DNSSEC secure zone manually, a series of steps +must be followed. Please see chapter +:ref:`advanced_discussions_manual_key_management_and_signing` in the +:doc:`dnssec-guide` for more information. + +Monitoring with Private Type Records +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The state of the signing process is signaled by private type records (with a +default type value of 65534). When signing is complete, those records with a +non-zero initial octet have a non-zero value for the final octet. + +If the first octet of a private type record is non-zero, the record indicates +either that the zone needs to be signed with the key matching the record, or +that all signatures that match the record should be removed. Here are the +meanings of the different values of the first octet: + + - algorithm (octet 1) + + - key ID in network order (octet 2 and 3) + + - removal flag (octet 4) + + - complete flag (octet 5) + +Only records flagged as "complete" can be removed via dynamic update; attempts +to remove other private type records are silently ignored. + +If the first octet is zero (this is a reserved algorithm number that should +never appear in a ``DNSKEY`` record), the record indicates that changes to the +``NSEC3`` chains are in progress. The rest of the record contains an +``NSEC3PARAM`` record, while the flag field tells what operation to perform +based on the flag bits: + + 0x01 OPTOUT + + 0x80 CREATE + + 0x40 REMOVE + + 0x20 NONSEC + +.. _secure_delegation: + +Secure Delegation +~~~~~~~~~~~~~~~~~ + +Once a zone is signed on the authoritative servers, the last remaining step +is to establish chain of trust [#validation]_ between the parent zone +(``example.``) and the local zone (``dnssec.example.``). + +Generally the procedure is: + + - **Wait** for stale data to expire from caches. The amount of time required + is equal to the maximum TTL value used in the zone before signing. This + step ensures that unsigned data expire from caches and resolvers do not get + confused by missing signatures. + - Insert/update DS records in the parent zone (``dnssec.example. DS`` record). + +There are multiple ways to update DS records in the parent zone. Refer to the +documentation for the parent zone to find out which options are applicable to +a given case zone. Generally the options are, from most- to least-recommended: + + - Automatically update the DS record in the parent zone using + ``CDS``/``CDNSKEY`` records automatically generated by BIND. This requires + support for :rfc:`7344` in either parent zone, registry, or registrar. In + that case, configure BIND to :ref:`monitor DS records in the parent + zone <cds_cdnskey>` and everything will happen automatically at the right + time. + - Query the zone for automatically generated ``CDS`` or ``CDNSKEY`` records using + :iscman:`dig`, and then insert these records into the parent zone using + the method specified by the parent zone (web form, e-mail, API, ...). + - Generate DS records manually using the :iscman:`dnssec-dsfromkey` utility on + `zone keys`_, and then insert them into the parent zone. + +.. [#validation] For further details on how the chain of trust is used in practice, see + :ref:`dnssec_12_steps` in the :doc:`dnssec-guide`. + + + +DNSSEC Validation +~~~~~~~~~~~~~~~~~ + +The BIND resolver validates answers from authoritative servers by default. This +behavior is controlled by the configuration statement :namedconf:ref:`dnssec-validation`. + +By default a trust anchor for the DNS root zone is used. +This trust anchor is provided as part of BIND and is kept up-to-date using +:ref:`rfc5011.support`. + +.. note:: + DNSSEC validation works "out of the box" and does not require + additional configuration. Additional configuration options are intended only + for special cases. + +To validate answers, the resolver needs at least one trusted starting point, +a "trust anchor." Essentially, trust anchors are copies of ``DNSKEY`` RRs for +zones that are used to form the first link in the cryptographic chain of trust. +Alternative trust anchors can be specified using :any:`trust-anchors`, but +this setup is very unusual and is recommended only for expert use. +For more information, see :ref:`trust_anchors_description` in the +:doc:`dnssec-guide`. + +The BIND authoritative server does not verify signatures on load, so zone keys +for authoritative zones do not need to be specified in the configuration +file. + +Validation Failures +^^^^^^^^^^^^^^^^^^^ + +When DNSSEC validation is configured, the resolver rejects any answers from +signed, secure zones which fail to validate, and returns SERVFAIL to the +client. + +Responses may fail to validate for any of several reasons, including +missing, expired, or invalid signatures; a key which does not match the +DS RRset in the parent zone; or an insecure response from a zone which, +according to its parent, should have been secure. + +For more information see :ref:`dnssec_troubleshooting`. + +Coexistence With Unsigned (Insecure) Zones +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Zones not protected by DNSSEC are called "insecure," and these zones seamlessly +coexist with signed zones. + +When the validator receives a response from an unsigned zone that has +a signed parent, it must confirm with the parent that the zone was +intentionally left unsigned. It does this by verifying, via signed +and validated :ref:`NSEC/NSEC3 records +<advanced_discussions_proof_of_nonexistence>`, that the parent zone contains no +DS records for the child. + +If the validator *can* prove that the zone is insecure, then the +response is accepted. However, if it cannot, the validator must assume an +insecure response to be a forgery; it rejects the response and logs +an error. + +The logged error reads "insecurity proof failed" and "got insecure +response; parent indicates it should be secure." diff --git a/doc/arm/dyndb.inc.rst b/doc/arm/dyndb.inc.rst new file mode 100644 index 0000000..59ceb66 --- /dev/null +++ b/doc/arm/dyndb.inc.rst @@ -0,0 +1,92 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _dyndb-info: + +Dynamic Database (DynDB) +------------------------ + +Dynamic Database, or DynDB, is an extension to BIND 9 which, like DLZ (see +:ref:`dlz-info`), allows zone data to be retrieved from an external +database. Unlike DLZ, a DynDB module provides a full-featured BIND zone +database interface. Where DLZ translates DNS queries into real-time +database lookups, resulting in relatively poor query performance, and is +unable to handle DNSSEC-signed data due to its limited API, a DynDB +module can pre-load an in-memory database from the external data source, +providing the same performance and functionality as zones served +natively by BIND. + +A DynDB module supporting LDAP has been created by Red Hat and is +available from https://pagure.io/bind-dyndb-ldap. + +A sample DynDB module for testing and developer guidance is included +with the BIND source code, in the directory +``bin/tests/system/dyndb/driver``. + +Configuring DynDB +~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: dyndb + :tags: zone + :short: Configures a DynDB database in :iscman:`named.conf`. + +A DynDB database is configured with a :any:`dyndb` statement in +:iscman:`named.conf`: + +:: + + dyndb example "driver.so" { + parameters + }; + + +The file ``driver.so`` is a DynDB module which implements the full DNS +database API. Multiple :any:`dyndb` statements can be specified, to load +different drivers or multiple instances of the same driver. Zones +provided by a DynDB module are added to the view's zone table, and are +treated as normal authoritative zones when BIND responds to +queries. Zone configuration is handled internally by the DynDB module. + +The parameters are passed as an opaque string to the DynDB module's +initialization routine. Configuration syntax differs depending on +the driver. + +Sample DynDB Module +~~~~~~~~~~~~~~~~~~~ + +For guidance in the implementation of DynDB modules, the directory +``bin/tests/system/dyndb/driver`` contains a basic DynDB module. The +example sets up two zones, whose names are passed to the module as +arguments in the :any:`dyndb` statement: + +:: + + dyndb sample "sample.so" { example.nil. arpa. }; + + +In the above example, the module is configured to create a zone, +"example.nil", which can answer queries and AXFR requests and accept +DDNS updates. At runtime, prior to any updates, the zone contains an +SOA, NS, and a single A record at the apex: + +:: + + example.nil. 86400 IN SOA example.nil. example.nil. ( + 0 28800 7200 604800 86400 + ) + example.nil. 86400 IN NS example.nil. + example.nil. 86400 IN A 127.0.0.1 + + +When the zone is updated dynamically, the DynDB module determines +whether the updated RR is an address (i.e., type A or AAAA); if so, +it automatically updates the corresponding PTR record in a reverse +zone. Note that updates are not stored permanently; all updates are lost when the +server is restarted. diff --git a/doc/arm/general.rst b/doc/arm/general.rst new file mode 100644 index 0000000..5b65f6a --- /dev/null +++ b/doc/arm/general.rst @@ -0,0 +1,456 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. General: + +General DNS Reference Information +================================= + +.. _rfcs: + +Requests for Comment (RFCs) +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Specification documents for the Internet protocol suite, including the +DNS, are published as part of the `Request for Comments`_ (RFCs) series +of technical notes. The standards themselves are defined by the +`Internet Engineering Task Force`_ (IETF) and the `Internet Engineering +Steering Group`_ (IESG). RFCs can be viewed online at: +https://www.rfc-editor.org/. + +While reading RFCs, please keep in mind that :rfc:`not all RFCs are +standards <1796>`, and also that the validity of documents does change +over time. Every RFC needs to be interpreted in the context of other +documents. + +BIND 9 strives for strict compliance with IETF standards. To the best +of our knowledge, BIND 9 complies with the following RFCs, with +the caveats and exceptions listed in the numbered notes below. Many +of these RFCs were written by current or former ISC staff members. +The list is non-exhaustive. + +.. _Internet Engineering Steering Group: https://www.ietf.org/about/groups/iesg/ +.. _Internet Engineering Task Force: https://www.ietf.org/about/ +.. _Request for Comments: https://www.ietf.org/standards/rfcs/ + +Some of these RFCs, though DNS-related, are not concerned with implementing +software. + +Protocol Specifications +----------------------- + +:rfc:`1034` - P. Mockapetris. *Domain Names — Concepts and Facilities.* November +1987. + +:rfc:`1035` - P. Mockapetris. *Domain Names — Implementation and Specification.* +November 1987. [#rfc1035_1]_ [#rfc1035_2]_ + +:rfc:`1183` - C. F. Everhart, L. A. Mamakos, R. Ullmann, P. Mockapetris. *New DNS RR +Definitions.* October 1990. + +:rfc:`1706` - B. Manning and R. Colella. *DNS NSAP Resource Records.* October 1994. + +:rfc:`1712` - C. Farrell, M. Schulze, S. Pleitner, and D. Baldoni. *DNS Encoding of +Geographical Location.* November 1994. + +:rfc:`1876` - C. Davis, P. Vixie, T. Goodwin, and I. Dickinson. *A Means for Expressing +Location Information in the Domain Name System.* January 1996. + +:rfc:`1982` - R. Elz and R. Bush. *Serial Number Arithmetic.* August 1996. + +:rfc:`1995` - M. Ohta. *Incremental Zone Transfer in DNS.* August 1996. + +:rfc:`1996` - P. Vixie. *A Mechanism for Prompt Notification of Zone Changes (DNS NOTIFY).* +August 1996. + +:rfc:`2136` - P. Vixie, S. Thomson, Y. Rekhter, and J. Bound. *Dynamic Updates in the +Domain Name System (DNS UPDATE).* April 1997. + +:rfc:`2163` - A. Allocchio. *Using the Internet DNS to Distribute MIXER +Conformant Global Address Mapping (MCGAM).* January 1998. + +:rfc:`2181` - R. Elz and R. Bush. *Clarifications to the DNS Specification.* July 1997. + +:rfc:`2230` - R. Atkinson. *Key Exchange Delegation Record for the DNS.* November +1997. + +:rfc:`2308` - M. Andrews. *Negative Caching of DNS Queries (DNS NCACHE).* March 1998. + +:rfc:`2539` - D. Eastlake, 3rd. *Storage of Diffie-Hellman Keys in the Domain Name +System (DNS).* March 1999. + +:rfc:`2782` - A. Gulbrandsen, P. Vixie, and L. Esibov. *A DNS RR for Specifying the +Location of Services (DNS SRV).* February 2000. + +:rfc:`2930` - D. Eastlake, 3rd. *Secret Key Establishment for DNS (TKEY RR).* +September 2000. + +:rfc:`2931` - D. Eastlake, 3rd. *DNS Request and Transaction Signatures (SIG(0)s).* +September 2000. [#rfc2931]_ + +:rfc:`3007` - B. Wellington. *Secure Domain Name System (DNS) Dynamic Update.* +November 2000. + +:rfc:`3110` - D. Eastlake, 3rd. *RSA/SHA-1 SIGs and RSA KEYs in the Domain Name +System (DNS).* May 2001. + +:rfc:`3123` - P. Koch. *A DNS RR Type for Lists of Address Prefixes (APL RR).* June +2001. + +:rfc:`3225` - D. Conrad. *Indicating Resolver Support of DNSSEC.* December 2001. + +:rfc:`3226` - O. Gudmundsson. *DNSSEC and IPv6 A6 Aware Server/Resolver +Message Size Requirements.* December 2001. + +:rfc:`3363` - R. Bush, A. Durand, B. Fink, O. Gudmundsson, and T. Hain. +*Representing Internet Protocol Version 6 (IPv6) Addresses in the Domain Name +System (DNS).* August 2002. [#rfc3363]_ + +:rfc:`3403` - M. Mealling. +*Dynamic Delegation Discovery System (DDDS). Part Three: The Domain Name System +(DNS) Database.* +October 2002. + +:rfc:`3492` - A. Costello. *Punycode: A Bootstring Encoding of Unicode for +Internationalized Domain Names in Applications (IDNA).* March 2003. + +:rfc:`3493` - R. Gilligan, S. Thomson, J. Bound, J. McCann, and W. Stevens. +*Basic Socket Interface Extensions for IPv6.* March 2003. + +:rfc:`3496` - A. G. Malis and T. Hsiao. *Protocol Extension for Support of +Asynchronous Transfer Mode (ATM) Service Class-aware Multiprotocol Label +Switching (MPLS) Traffic Engineering.* March 2003. + +:rfc:`3596` - S. Thomson, C. Huitema, V. Ksinant, and M. Souissi. *DNS Extensions to +Support IP Version 6.* October 2003. + +:rfc:`3597` - A. Gustafsson. *Handling of Unknown DNS Resource Record (RR) Types.* +September 2003. + +:rfc:`3645` - S. Kwan, P. Garg, J. Gilroy, L. Esibov, J. Westhead, and R. Hall. *Generic +Security Service Algorithm for Secret Key Transaction Authentication for +DNS (GSS-TSIG).* October 2003. + +:rfc:`4025` - M. Richardson. *A Method for Storing IPsec Keying Material in +DNS.* March 2005. + +:rfc:`4033` - R. Arends, R. Austein, M. Larson, D. Massey, and S. Rose. *DNS Security +Introduction and Requirements.* March 2005. + +:rfc:`4034` - R. Arends, R. Austein, M. Larson, D. Massey, and S. Rose. *Resource Records for +the DNS Security Extensions.* March 2005. + +:rfc:`4035` - R. Arends, R. Austein, M. Larson, D. Massey, and S. Rose. *Protocol +Modifications for the DNS Security Extensions.* March 2005. + +:rfc:`4255` - J. Schlyter and W. Griffin. *Using DNS to Securely Publish Secure +Shell (SSH) Key Fingerprints.* January 2006. + +:rfc:`4343` - D. Eastlake, 3rd. *Domain Name System (DNS) Case Insensitivity +Clarification.* January 2006. + +:rfc:`4398` - S. Josefsson. *Storing Certificates in the Domain Name System (DNS).* March 2006. + +:rfc:`4470` - S. Weiler and J. Ihren. *Minimally covering NSEC Records and +DNSSEC On-line Signing.* April 2006. [#rfc4470]_ + +:rfc:`4509` - W. Hardaker. *Use of SHA-256 in DNSSEC Delegation Signer +(DS) Resource Records (RRs).* May 2006. + +:rfc:`4592` - E. Lewis. *The Role of Wildcards in the Domain Name System.* July 2006. + +:rfc:`4635` - D. Eastlake, 3rd. *HMAC SHA (Hashed Message Authentication +Code, Secure Hash Algorithm) TSIG Algorithm Identifiers.* August 2006. + +:rfc:`4701` - M. Stapp, T. Lemon, and A. Gustafsson. *A DNS Resource Record +(RR) for Encoding Dynamic Host Configuration Protocol (DHCP) Information (DHCID +RR).* October 2006. + +:rfc:`4955` - D. Blacka. *DNS Security (DNSSEC) Experiments.* July 2007. [#rfc4955]_ + +:rfc:`5001` - R. Austein. *DNS Name Server Identifier (NSID) Option.* August 2007. + +:rfc:`5011` - M. StJohns. *Automated Updates of DNS Security (DNSSEC) Trust Anchors.* + +:rfc:`5155` - B. Laurie, G. Sisson, R. Arends, and D. Blacka. *DNS Security +(DNSSEC) Hashed Authenticated Denial of Existence.* March 2008. + +:rfc:`5205` - P. Nikander and J. Laganier. *Host Identity Protocol (HIP) +Domain Name System (DNS) Extension.* April 2008. + +:rfc:`5452` - A. Hubert and R. van Mook. *Measures for Making DNS More +Resilient Against Forged Answers.* January 2009. [#rfc5452]_ + +:rfc:`5702` - J. Jansen. *Use of SHA-2 Algorithms with RSA in DNSKEY and +RRSIG Resource Records for DNSSEC.* October 2009. + +:rfc:`5891` - J. Klensin. +*Internationalized Domain Names in Applications (IDNA): Protocol.* +August 2010 + +:rfc:`5936` - E. Lewis and A. Hoenes, Ed. *DNS Zone Transfer Protocol (AXFR).* +June 2010. + +:rfc:`5952` - S. Kawamura and M. Kawashima. *A Recommendation for IPv6 Address +Text Representation.* August 2010. + +:rfc:`6052` - C. Bao, C. Huitema, M. Bagnulo, M. Boucadair, and X. Li. *IPv6 +Addressing of IPv4/IPv6 Translators.* October 2010. + +:rfc:`6147` - M. Bagnulo, A. Sullivan, P. Matthews, and I. van Beijnum. +*DNS64: DNS Extensions for Network Address Translation from IPv6 Clients to +IPv4 Servers.* April 2011. [#rfc6147]_ + +:rfc:`6604` - D. Eastlake, 3rd. *xNAME RCODE and Status Bits Clarification.* +April 2012. + +:rfc:`6605` - P. Hoffman and W. C. A. Wijngaards. *Elliptic Curve Digital +Signature Algorithm (DSA) for DNSSEC.* April 2012. [#rfc6605]_ + +:rfc:`6672` - S. Rose and W. Wijngaards. *DNAME Redirection in the DNS.* +June 2012. + +:rfc:`6698` - P. Hoffman and J. Schlyter. *The DNS-Based Authentication of +Named Entities (DANE) Transport Layer Security (TLS) Protocol: TLSA.* +August 2012. + +:rfc:`6725` - S. Rose. *DNS Security (DNSSEC) DNSKEY Algorithm IANA Registry +Updates.* August 2012. [#rfc6725]_ + +:rfc:`6742` - RJ Atkinson, SN Bhatti, U. St. Andrews, and S. Rose. *DNS +Resource Records for the Identifier-Locator Network Protocol (ILNP).* +November 2012. + +:rfc:`6840` - S. Weiler, Ed., and D. Blacka, Ed. *Clarifications and +Implementation Notes for DNS Security (DNSSEC).* February 2013. [#rfc6840]_ + +:rfc:`6891` - J. Damas, M. Graff, and P. Vixie. *Extension Mechanisms for DNS +(EDNS(0)).* April 2013. + +:rfc:`7043` - J. Abley. *Resource Records for EUI-48 and EUI-64 Addresses +in the DNS.* October 2013. + +:rfc:`7050` - T. Savolainen, J. Korhonen, and D. Wing. *Discovery of the IPv6 +Prefix Used for IPv6 Address Synthesis.* November 2013. [#rfc7050]_ + +:rfc:`7208` - S. Kitterman. +*Sender Policy Framework (SPF) for Authorizing Use of Domains in Email, +Version 1.* +April 2014. + +:rfc:`7314` - M. Andrews. *Extension Mechanisms for DNS (EDNS) EXPIRE Option.* +July 2014. + +:rfc:`7344` - W. Kumari, O. Gudmundsson, and G. Barwood. *Automating DNSSEC +Delegation Trust Maintenance.* September 2014. [#rfc7344]_ + +:rfc:`7477` - W. Hardaker. *Child-to-Parent Synchronization in DNS.* March +2015. + +:rfc:`7553` - P. Faltstrom and O. Kolkman. *The Uniform Resource Identifier +(URI) DNS Resource Record.* June 2015. + +:rfc:`7583` - S. Morris, J. Ihren, J. Dickinson, and W. Mekking. *DNSSEC Key +Rollover Timing Considerations.* October 2015. + +:rfc:`7766` - J. Dickinson, S. Dickinson, R. Bellis, A. Mankin, and D. +Wessels. *DNS Transport over TCP - Implementation Requirements.* March 2016. + +:rfc:`7828` - P. Wouters, J. Abley, S. Dickinson, and R. Bellis. +*The edns-tcp-keepalive EDNS0 Option.* April 2016. + +:rfc:`7830` - A. Mayrhofer. *The EDNS(0) Padding Option.* May 2016. [#rfc7830]_ + +:rfc:`7858` - Z. Hu, L. Zhu, J. Heidemann, A. Mankin, D. Wessels, +and P. Hoffman. *Specification for DNS over Transport Layer Security (TLS).* +May 2016. [#noencryptedfwd]_ + +:rfc:`7929` - P. Wouters. *DNS-Based Authentication of Named Entities (DANE) +Bindings for OpenPGP.* August 2016. + +:rfc:`8078` - O. Gudmundsson and P. Wouters. *Managing DS Records from the +Parent via CDS/CDNSKEY.* March 2017. [#rfc8078]_ + +:rfc:`8080` - O. Sury and R. Edmonds. *Edwards-Curve Digital Security Algorithm +(EdDSA) for DNSSEC.* February 2017. + +:rfc:`8484` - P. Hoffman and P. McManus. *DNS Queries over HTTPS (DoH).* +October 2018. [#noencryptedfwd]_ + +:rfc:`8624` - P. Wouters and O. Sury. *Algorithm Implementation Requirements +and Usage Guidance for DNSSEC.* June 2019. + +:rfc:`8659` - P. Hallam-Baker, R. Stradling, and J. Hoffman-Andrews. +*DNS Certification Authority Authorization (CAA) Resource Record.* +November 2019. + +:rfc:`8880` - S. Cheshire and D. Schinazi. *Special Use Domain Name +'ipv4only.arpa'.* August 2020. + +:rfc:`8945` - F. Dupont, S. Morris, P. Vixie, D. Eastlake 3rd, O. Gudmundsson, +and B. Wellington. +*Secret Key Transaction Authentication for DNS (TSIG).* +November 2020. + +:rfc:`9103` - W. Toorop, S. Dickinson, S. Sahib, P. Aras, and A. Mankin. +*DNS Zone Transfer over TLS.* August 2021. [#rfc9103]_ + +Best Current Practice RFCs +-------------------------- + +:rfc:`2219` - M. Hamilton and R. Wright. *Use of DNS Aliases for Network Services.* +October 1997. + +:rfc:`2317` - H. Eidnes, G. de Groot, and P. Vixie. *Classless IN-ADDR.ARPA Delegation.* +March 1998. + +:rfc:`2606` - D. Eastlake, 3rd and A. Panitz. *Reserved Top Level DNS Names.* June +1999. [#rfc2606]_ + +:rfc:`3901` - A. Durand and J. Ihren. *DNS IPv6 Transport Operational Guidelines.* +September 2004. + +:rfc:`5625` - R. Bellis. *DNS Proxy Implementation Guidelines.* August 2009. + +:rfc:`6303` - M. Andrews. *Locally Served DNS Zones.* July 2011. + +:rfc:`7793` - M. Andrews. *Adding 100.64.0.0/10 Prefixes to the IPv4 +Locally-Served DNS Zones Registry.* May 2016. + +:rfc:`8906` - M. Andrews and R. Bellis. *A Common Operational Problem in DNS +Servers: Failure to Communicate.* September 2020. + +For Your Information +-------------------- + +:rfc:`1101` - P. Mockapetris. *DNS Encoding of Network Names and Other Types.* +April 1989. + +:rfc:`1123` - R. Braden. *Requirements for Internet Hosts - Application and +Support.* October 1989. + +:rfc:`1535` - E. Gavron. *A Security Problem and Proposed Correction With Widely +Deployed DNS Software.* October 1993. + +:rfc:`1536` - A. Kumar, J. Postel, C. Neuman, P. Danzig, and S. Miller. *Common DNS +Implementation Errors and Suggested Fixes.* October 1993. + +:rfc:`1912` - D. Barr. *Common DNS Operational and Configuration Errors.* February +1996. + +:rfc:`2874` - M. Crawford and C. Huitema. *DNS Extensions to Support IPv6 Address +Aggregation and Renumbering.* July 2000. [#rfc2874]_ + +:rfc:`3833` - D. Atkins and R. Austein. *Threat Analysis of the Domain Name System +(DNS).* August 2004. + +:rfc:`4074` - Y. Morishita and T. Jinmei. *Common Misbehavior Against DNS Queries for +IPv6 Addresses.* June 2005. + +:rfc:`4431` - M. Andrews and S. Weiler. *The DNSSEC Lookaside Validation +(DLV) DNS Resource Record.* February 2006. [#rfc4431]_ + +:rfc:`4892` - S. Woolf and D. Conrad. *Requirements for a Mechanism +Identifying a Name Server Instance.* June 2007. + +:rfc:`6781` - O. Kolkman, W. Mekking, and R. Gieben. *DNSSEC Operational +Practices, Version 2.* December 2012. + +:rfc:`7129` - R. Gieben and W. Mekking. *Authenticated Denial of Existence +in the DNS.* February 2014. + +:rfc:`8749` - W. Mekking and D. Mahoney. *Moving DNSSEC Lookaside Validation +(DLV) to Historic Status.* March 2020. + +Notes +~~~~~ + +.. [#rfc1035_1] Queries to zones that have failed to load return SERVFAIL rather + than a non-authoritative response. This is considered a feature. + +.. [#rfc1035_2] CLASS ANY queries are not supported. This is considered a + feature. + +.. [#rfc2931] When receiving a query signed with a SIG(0), the server is + only able to verify the signature if it has the key in its local + authoritative data; it cannot do recursion or validation to + retrieve unknown keys. + +.. [#rfc2874] Compliance is with loading and serving of A6 records only. + A6 records were moved to the experimental category by :rfc:`3363`. + +.. [#rfc4431] Compliance is with loading and serving of DLV records only. + DLV records were moved to the historic category by :rfc:`8749`. + +.. [#rfc4470] Minimally Covering NSEC records are accepted but not generated. + +.. [#rfc4955] BIND 9 interoperates with correctly designed experiments. + +.. [#rfc5452] :iscman:`named` only uses ports to extend the ID space; addresses are not + used. + +.. [#rfc6147] Section 5.5 does not match reality. :iscman:`named` uses the presence + of DO=1 to detect if validation may be occurring. CD has no bearing + on whether validation occurs. + +.. [#rfc6605] Compliance is conditional on the OpenSSL library being linked against + a supporting ECDSA. + +.. [#rfc6725] RSAMD5 support has been removed. See :rfc:`8624`. + +.. [#rfc6840] Section 5.9 - Always set CD=1 on queries. This is *not* done, as + it prevents DNSSEC from working correctly through another recursive server. + + When talking to a recursive server, the best algorithm is to send + CD=0 and then send CD=1 iff SERVFAIL is returned, in case the recursive + server has a bad clock and/or bad trust anchor. Alternatively, one + can send CD=1 then CD=0 on validation failure, in case the recursive + server is under attack or there is stale/bogus authoritative data. + +.. [#rfc7344] Updating of parent zones is not yet implemented. + +.. [#rfc7830] :iscman:`named` does not currently encrypt DNS requests, so the PAD option + is accepted but not returned in responses. + +.. [#rfc3363] Section 4 is ignored. + +.. [#rfc2606] This does not apply to DNS server implementations. + +.. [#rfc1521] Only the Base 64 encoding specification is supported. + +.. [#idna] BIND 9 requires ``--with-libidn2`` to enable entry of IDN labels within + dig, host, and nslookup at compile time. ACE labels are supported + everywhere with or without ``--with-libidn2``. + +.. [#rfc4294] Section 5.1 - DNAME records are fully supported. + +.. [#rfc7050] RFC 7050 is updated by RFC 8880. + +.. [#noencryptedfwd] Forwarding DNS queries over encrypted transports is not + supported yet. + +.. [#rfc8078] Updating of parent zones is not yet implemented. + +.. [#rfc9103] Strict TLS and Mutual TLS authentication mechanisms are + not supported yet. + +.. _internet_drafts: + +Internet Drafts +~~~~~~~~~~~~~~~ + +Internet Drafts (IDs) are rough-draft working documents of the Internet +Engineering Task Force (IETF). They are, in essence, RFCs in the preliminary +stages of development. Implementors are cautioned not to regard IDs as +archival, and they should not be quoted or cited in any formal documents +unless accompanied by the disclaimer that they are "works in progress." +IDs have a lifespan of six months, after which they are deleted unless +updated by their authors. diff --git a/doc/arm/history.rst b/doc/arm/history.rst new file mode 100644 index 0000000..5049982 --- /dev/null +++ b/doc/arm/history.rst @@ -0,0 +1,77 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. History: + +A Brief History of the DNS and BIND +=================================== + +Although the Domain Name System "officially" began in +1984 with the publication of :rfc:`920`, the core of the new system was +described in 1983 in :rfc:`882` and :rfc:`883`. From 1984 to 1987, the ARPAnet +(the precursor to today's Internet) became a testbed of experimentation +for developing the new naming/addressing scheme in a rapidly expanding, +operational network environment. New RFCs were written and published in +1987 that modified the original documents to incorporate improvements +based on the working model. :rfc:`1034`, "Domain Names-Concepts and +Facilities," and :rfc:`1035`, "Domain Names-Implementation and +Specification," were published and became the standards upon which all +DNS implementations are built. + +The first working domain name server, called "Jeeves," was written in +1983-84 by Paul Mockapetris for operation on DEC Tops-20 machines +located at the University of Southern California's Information Sciences +Institute (USC-ISI) and SRI International's Network Information Center +(SRI-NIC). A DNS server for Unix machines, the Berkeley Internet Name +Domain (BIND) package, was written soon after by a group of graduate +students at the University of California at Berkeley under a grant from +the US Defense Advanced Research Projects Administration (DARPA). + +Versions of BIND through 4.8.3 were maintained by the Computer Systems +Research Group (CSRG) at UC Berkeley. Douglas Terry, Mark Painter, David +Riggle, and Songnian Zhou made up the initial BIND project team. After +that, additional work on the software package was done by Ralph +Campbell. Kevin Dunlap, a Digital Equipment Corporation employee on loan +to the CSRG, worked on BIND for 2 years, from 1985 to 1987. Many other +people also contributed to BIND development during that time: Doug +Kingston, Craig Partridge, Smoot Carl-Mitchell, Mike Muuss, Jim Bloom, +and Mike Schwartz. BIND maintenance was subsequently handled by Mike +Karels and Øivind Kure. + +BIND versions 4.9 and 4.9.1 were released by Digital Equipment +Corporation (which became Compaq Computer Corporation and eventually merged +with Hewlett-Packard). Paul Vixie, then a DEC +employee, became BIND's primary caretaker. He was assisted by Phil +Almquist, Robert Elz, Alan Barrett, Paul Albitz, Bryan Beecher, Andrew +Partan, Andy Cherenson, Tom Limoncelli, Berthold Paffrath, Fuat Baran, +Anant Kumar, Art Harkin, Win Treese, Don Lewis, Christophe Wolfhugel, +and others. + +In 1994, BIND version 4.9.2 was sponsored by Vixie Enterprises. Paul +Vixie became BIND's principal architect/programmer. + +BIND versions from 4.9.3 onward have been developed and maintained by +Internet Systems Consortium and its predecessor, the Internet +Software Consortium, with support provided by ISC's sponsors. + +As co-architects/programmers, Bob Halley and Paul Vixie released the +first production-ready version of BIND version 8 in May 1997. + +BIND version 9 was released in September 2000 and is a major rewrite of +nearly all aspects of the underlying BIND architecture. + +BIND versions 4 and 8 are officially deprecated. No additional +development is done on BIND version 4 or BIND version 8. + +BIND development work is made possible today by the sponsorship of +corporations who purchase professional support services from ISC +(https://www.isc.org/contact/) and/or donate to our mission, and by the +tireless efforts of numerous individuals. diff --git a/doc/arm/index.rst b/doc/arm/index.rst new file mode 100644 index 0000000..5232075 --- /dev/null +++ b/doc/arm/index.rst @@ -0,0 +1,43 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. meta:: + :google-site-verification: 0-DMrB_qDynsvXBKJhpsS5m8l5oVea8Qe2ojkudjtCY + +************************************* +BIND 9 Administrator Reference Manual +************************************* + +.. toctree:: + :numbered: + :maxdepth: 2 + + chapter1 + chapter2 + chapter3 + chapter4 + chapter5 + chapter6 + chapter7 + reference + chapter9 + chapter10 + +.. toctree:: + :caption: Appendices + :name: appendices + :maxdepth: 2 + + notes + dnssec-guide + history + general + manpages diff --git a/doc/arm/intro-dns-bind.inc.rst b/doc/arm/intro-dns-bind.inc.rst new file mode 100644 index 0000000..58b0d29 --- /dev/null +++ b/doc/arm/intro-dns-bind.inc.rst @@ -0,0 +1,197 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _dns_overview: + +The Domain Name System (DNS) +---------------------------- + +This is a brief description of the functionality and organization of the Domain Name System (DNS). +It is provided to familiarize users with the concepts involved, the (often confusing) terminology +used, and how all the parts fit together to form an operational system. + +All network systems operate with network addresses, such as IPv4 and IPv6. The vast majority of +humans find it easier to work with names rather than seemingly endless strings of network address digits. The earliest ARPANET systems +(from which the Internet evolved) mapped names to addresses using a **hosts** file that was distributed to all entities +whenever changes occurred. Operationally, such a system became rapidly unsustainable once there were more +than 100 networked entities, which led to the specification and implementation of the Domain Name System that we use today. + +.. _dns_fundamentals: + +DNS Fundamentals +~~~~~~~~~~~~~~~~ + +The DNS naming system is organized as a tree structure comprised of multiple levels and +thus it naturally creates a distributed system. Each node +in the tree is given a label which defines its **Domain** (its area or zone) of **Authority**. +The topmost node in the tree is the **Root Domain**; it delegates to **Domains** at the next level which are generically +known as the **Top-Level Domains (TLDs)**. They in turn delegate to **Second-Level Domains (SLDs)**, and so on. +The Top-Level Domains (TLDs) include a special group of TLDs called the **Country Code Top-Level Domains (ccTLDs)**, +in which every country is assigned a unique two-character country code from ISO 3166 as its domain. + +.. Note:: The Domain Name System is controlled by ICANN (https://www.icann.org) (a 501c non-profit entity); their current policy + is that any new TLD, consisting of three or more characters, may be proposed by any group of commercial sponsors and + if it meets ICANN's criteria will be added to the TLDs. + +The concept of delegation and authority flows down the DNS tree (the DNS hierarchy) as shown: + +.. figure:: dns-tree.png + :align: center + + Delegation and Authority in the DNS Name Space + +A domain is the label of a node in the tree. A **domain name** uniquely identifies any node in the DNS tree and is written, left to right, +by combining all the domain labels (each of which are unique within their parent's zone or domain of authority), with a dot +separating each component, up to the root domain. In the above diagram the following are all domain names: + +.. code-block:: + + example.com + b.com + ac.uk + us + org + +The root has a unique label of "." (dot), which is normally omitted when it is written as +a domain name, but when it is written as a **Fully Qualified Domain Name (FQDN)** the dot must be present. Thus: + +.. code-block:: + + example.com # domain name + example.com. # FQDN + +Authority and Delegation +~~~~~~~~~~~~~~~~~~~~~~~~ + +Each domain (node) has been **delegated** the authority from its parent domain. The delegated authority includes +specific responsibilities to ensure that every domain it delegates has a unique name or label within its zone or domain of authority, and +that it maintains an **authoritative** list of its delegated domains. The responsibilities further include an operational requirement to +operate two (or more) name servers (which may be contracted to a third party) which will contain the authoritative data +for all the domain labels within its zone of authority in a :ref:`zone file<zone_file>`. Again, the +tree structure ensures that the DNS name space is naturally distributed. + +The following diagram illustrates that **Authoritative Name Servers** exist for every level and every domain in the DNS name space: + +.. figure:: dns-servers.png + :align: center + + Authoritative Name Servers in the DNS Name Space + +.. Note:: The difference between a domain and a zone can appear confusing. Practically, the terms are generally used synonymously in the DNS. + If, however, you are into directed graphs and tree structure theory or similar exotica, a zone can be considered as + an arc through any node (or domain) with the domain at its apex. The zone therefore encompasses all the name space below the domain. + This can, however, lead to the concept of subzones and these were indeed defined in the original DNS specifications. + Thankfully the term subzone has been lost in the mists of time. + +.. _root_servers: + +Root Servers +~~~~~~~~~~~~ + +The **root servers** are a critical part of the DNS authoritative infrastructure. There are 13 root servers (*a.root-servers.net* +to *m.root-servers.net*). The number 13 is historically based on the maximum amount of name and IPv4 data +that could be packed into a 512-byte UDP message, and not a perverse affinity for a number that certain +cultures treat as unlucky. The 512-byte UDP data limit +is no longer a limiting factor and all root servers now support both IPv4 and IPv6. In addition, almost all the +root servers use **anycast**, with well over +300 instances of the root servers now providing service worldwide (see further information at https://www.root-servers.org). +The root servers are the starting point for all **name resolution** within the DNS. + +Name Resolution +~~~~~~~~~~~~~~~ + +So far all the emphasis has been on how the DNS stores its authoritative domain (zone) data. End-user systems +use names (an email address or a web address) and need to access this authoritative data to obtain an IP address, which +they use to contact the required network resources such as web, FTP, or mail servers. The process of converting a +domain name to a result (typically an IP address, though other types of data may be obtained) is generically called **name resolution**, and is handled by +**resolvers** (also known as **caching name servers** and many other terms). The following diagram shows the typical name resolution process: + +.. figure:: name-resolution.png + :align: center + + Authoritative Name Servers and Name Resolution + +An end-user application, such as a browser (1), when needing to resolve a name such as **www.example.com**, makes an +internal system call to a minimal function resolution entity called a **stub resolver** (2). The stub resolver (using stored +IP addresses) contacts a resolver (a caching name server or full-service resolver) (3), which in turn contacts all the necessary +authoritative name servers (4, 5, and 6) to provide the answer that it then returns to the user (2, 1). To improve performance, +all resolvers (including most stub resolvers) cache (store) their results such that a subsequent request for the same data +is taken from the resolver's cache, removing the need to repeat the name resolution process and use time-consuming resources. All communication between +the stub resolver, the resolver, and the authoritative name servers uses the DNS protocol's query and response message pair. + +.. _referral: + +.. _recursive_query: + +.. _iterative_query: + +DNS Protocol and Queries +~~~~~~~~~~~~~~~~~~~~~~~~ + +DNS **queries** use the UDP protocol over the reserved port 53 (but both TCP and TLS can optionally be used in some parts of the network). + +The following diagram shows the name resolution process expressed in terms of DNS queries and responses. + +.. figure:: recursive-query.png + :align: center + + Resolvers and Queries + +The stub resolver sends a **recursive query** message (with the required domain name in the QUESTION section of the query) (2) to the resolver. +A **recursive** query simply requests the resolver to find the complete answer. A stub resolver only ever sends recursive queries +and always needs the service of a resolver. The response to a recursive query can be: + +1. The answer to the user's QUESTION in the ANSWER section of the query response. + +2. An error (such as NXDOMAIN - the name does not exist). + +The resolver, on receipt of the user's recursive query, either responds immediately, if the ANSWER is in its cache, or accesses +the DNS hierarchy to obtain the answer. The resolver always starts with root servers and sends an **iterative query** (4, 5, and 6). The +response to an iterative query can be: + +1. The answer to the resolver's QUESTION in the ANSWER section of the query response. + +2. A **referral** (indicated by an empty ANSWER section but data in the AUTHORITY section, +and typically IP addresses in the ADDITIONAL section of the response). + +3. An error (such as NXDOMAIN - the name does not exist). + +If the response is either an answer or an error, these are returned immediately to the user (and cached for future use). If the response +is a referral, the resolver needs to take additional action to respond to the user's recursive query. + +A referral, in essence, indicates that the queried server does not know the answer (the ANSWER section of the response is empty), but it +refers the resolver to the authoritative name servers (in the AUTHORITY section of the response) which it knows about in the +domain name supplied in the QUESTION section of the query. Thus, if the QUESTION is for the domain name **www.example.com**, the root +server to which the iterative query was sent adds a list of the **.com authoritative name servers** in the AUTHORITY section. +The resolver selects one of the servers from the AUTHORITY section and sends an +iterative query to it. Similarly, the .com authoritative name servers send a referral containing a list of the **example.com** authoritative name servers. +This process continues down the DNS hierarchy until either an ANSWER or an error is received, at which point the user's original recursive query +is sent a response. + +.. Note:: The DNS hierarchy is always accessed starting at the root servers and working down; there is no concept of "up" in the DNS hierarchy. Clearly, + if the resolver has already cached the list of .com authoritative name servers and the user's recursive query QUESTION contains a domain name + ending in .com, it can omit access to the root servers. However, that is simply an artifact (in this case a performance benefit) of + caching and does not change the concept of top-down access within the DNS hierarchy. + +The insatiably curious may find reading :rfc:`1034` and :rfc:`1035` a useful starting point for further information. + +DNS and BIND 9 +~~~~~~~~~~~~~~ + +BIND 9 is a complete implementation of the DNS protocol. BIND 9 can be configured (using its ``named.conf`` file) as +an authoritative name server, a resolver, and, on supported hosts, a stub resolver. While large operators +usually dedicate DNS servers to a single function per system, smaller operators will find that +BIND 9's flexible configuration features support multiple functions, such as a single DNS server acting +as both an authoritative name server and a resolver. + +Example configurations of basic :ref:`authoritative name servers<config_auth_samples>` and +:ref:`resolvers and forwarding resolvers<config_resolver_samples>`, as +well as :ref:`advanced configurations<Advanced>` and :ref:`secure configurations<Security>`, are provided. diff --git a/doc/arm/intro-security.inc.rst b/doc/arm/intro-security.inc.rst new file mode 100644 index 0000000..87db970 --- /dev/null +++ b/doc/arm/intro-security.inc.rst @@ -0,0 +1,76 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _intro_dns_security: + +DNS Security Overview +--------------------- + +DNS is a communications protocol. All communications protocols are potentially +vulnerable to both subversion and eavesdropping. It is important for +users to audit their exposure to the various threats within their operational environment and implement the +appropriate solutions. BIND 9, a specific implementation of the DNS protocol, +provides an extensive set of security features. The purpose of this section +is to help users to select from the range of available security features those +required for their specific user environment. + +A generic DNS network is shown below, followed by text descriptions. In general, +the further one goes from the left-hand side of the diagram, the more complex +the implementation. + +.. Note:: Historically, DNS data was regarded as public and security was + concerned, primarily, with ensuring the integrity of DNS data. DNS data privacy + is increasingly regarded as an important dimension of overall security, specifically :ref:`DNS over TLS<dns_over_tls>`. + +.. figure:: dns-security-overview.png + :align: center + + BIND 9 Security Overview + +The following notes refer to the numbered elements in the above diagram. + +1. A variety of system administration techniques and methods may be used to secure +BIND 9's local environment, including :ref:`file permissions <file_permissions>`, running +BIND 9 in a :ref:`jail <chroot_and_setuid>`, and the use of :ref:`Access_Control_Lists`. + +2. The remote name daemon control (:ref:`rndc<ops_rndc>`) program allows the system +administrator to control the operation of a name server. The majority of BIND 9 packages +or ports come preconfigured with local (loopback address) security preconfigured. +If ``rndc`` is being invoked from a remote host, further configuration is required. +The ``nsupdate`` tool uses **Dynamic DNS (DDNS)** features and allows users to dynamically +change the contents of the zone file(s). ``nsupdate`` access and security may be controlled +using ``named.conf`` :ref:`statements or using TSIG or SIG(0) cryptographic methods <dynamic_update_security>`. +Clearly, if the remote hosts used for either ``rndc`` or DDNS lie within a network entirely +under the user's control, the security threat may be regarded as non-existent. Any implementation requirements, +therefore, depend on the site's security policy. + +3. Zone transfer from a **primary** to one or more **secondary** authoritative name servers across a +public network carries risk. The zone transfer may be secured using +``named.conf`` :ref:`statements, TSIG cryptographic methods or TLS<sec_file_transfer>`. +Clearly, if the secondary authoritative name server(s) all lie within a network entirely +under the user's control, the security threat may be regarded as non-existent. Any implementation requirements +again depend on the site's security policy. + +4. If the operator of an authoritative name server (primary or secondary) wishes to ensure that +DNS responses to user-initiated queries about the zone(s) for which they are responsible can only +have come from their server, that the data received by the user is the same as that sent, and that +non-existent names are genuine, then :ref:`DNSSEC` is the only solution. DNSSEC requires configuration +and operational changes both to the authoritative name servers and to any resolver which accesses +those servers. + +5. The typical Internet-connected end-user device (PCs, laptops, and even mobile phones) either has +a stub resolver or operates via a DNS proxy. A stub resolver requires the services of an area +or full-service resolver to completely answer user queries. Stub resolvers on the majority of PCs and laptops +typically have a caching capability to increase performance. At this time there are no standard stub resolvers or proxy +DNS tools that implement DNSSEC. BIND 9 may be configured to provide such capability on supported Linux or Unix platforms. +:ref:`DNS over TLS <dns_over_tls>` may be configured to verify the integrity of the data between the stub resolver and +area (or full-service) resolver. However, unless the resolver and the Authoritative Name Server implements DNSSEC, end-to-end integrity (from +authoritative name server to stub resolver) cannot be guaranteed. diff --git a/doc/arm/introduction.inc.rst b/doc/arm/introduction.inc.rst new file mode 100644 index 0000000..42d7110 --- /dev/null +++ b/doc/arm/introduction.inc.rst @@ -0,0 +1,100 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _introduction: + +Introduction to DNS and BIND 9 +============================== + +The Internet Domain Name System (DNS) consists of: + +- the syntax to specify the names of entities in the Internet in a hierarchical manner, +- the rules used for delegating authority over names, and +- the system implementation that actually maps names to Internet addresses. + +DNS data is maintained in a group of distributed hierarchical databases. + +.. _doc_scope: + +Scope of Document +----------------- + +The Berkeley Internet Name Domain (BIND) software implements a domain name server +for a number of operating systems. This document provides basic +information about the installation and maintenance of Internet Systems +Consortium (ISC) BIND version 9 software package for system +administrators. + +This manual covers BIND version |release|. + +.. _organization: + +Organization of This Document +----------------------------- + +:ref:`introduction` introduces the basic DNS and BIND concepts. Some tutorial material on +:ref:`dns_overview` is presented for those unfamiliar with DNS. A +:ref:`intro_dns_security` is provided to allow BIND operators to implement +appropriate security for their operational environment. + +:ref:`requirements` describes the hardware and environment requirements for BIND 9 +and lists both the supported and unsupported platforms. + +:ref:`configuration` is intended as a quickstart guide for newer users. Sample files +are included for :ref:`config_auth_samples` (both :ref:`primary<sample_primary>` and +:ref:`secondary<sample_secondary>`), as well as a simple :ref:`config_resolver_samples` and +a :ref:`sample_forwarding`. Some reference material on the :ref:`Zone File<zone_file>` is included. + +:ref:`ns_operations` covers basic BIND 9 software and DNS operations, including some +useful tools, Unix signals, and plugins. + +:ref:`advanced` builds on the configurations of :ref:`configuration`, adding +functions and features the system administrator may need. + +:ref:`security` covers most aspects of BIND 9 security, including file permissions, +running BIND 9 in a "jail," and securing file transfers and dynamic updates. + +:ref:`dnssec` describes the theory and practice of cryptographic authentication of DNS +information. The :ref:`dnssec_guide` is a practical guide to implementing DNSSEC. + +:ref:`Reference` gives exhaustive descriptions of all supported blocks, statements, +and grammars used in BIND 9's ``named.conf`` configuration file. + +:ref:`troubleshooting` provides information on identifying and solving BIND 9 and DNS +problems. Information about bug-reporting procedures is also provided. + +:ref:`build_bind` is a definitive guide for those occasions where the user requires +special options not provided in the standard Linux or Unix distributions. + +The **Appendices** contain useful reference information, such as a bibliography and historic +information related to BIND and the Domain Name System, as well as the current *man* +pages for all the published tools. + +.. _conventions: + +Conventions Used in This Document +--------------------------------- + +In this document, we generally use ``fixed-width`` text to indicate the +following types of information: + +- pathnames +- filenames +- URLs +- hostnames +- mailing list names +- new terms or concepts +- literal user input +- program output +- keywords +- variables + +Text in "quotes," **bold text**, or *italics* is also used for emphasis or clarity. diff --git a/doc/arm/isc-logo.pdf b/doc/arm/isc-logo.pdf Binary files differnew file mode 100644 index 0000000..7877082 --- /dev/null +++ b/doc/arm/isc-logo.pdf diff --git a/doc/arm/logging-categories.inc.rst b/doc/arm/logging-categories.inc.rst new file mode 100644 index 0000000..d7194c4 --- /dev/null +++ b/doc/arm/logging-categories.inc.rst @@ -0,0 +1,123 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +``client`` + Processing of client requests. + +``cname`` + Name servers that are skipped for being a CNAME rather than A/AAAA records. + +``config`` + Configuration file parsing and processing. + +``database`` + Messages relating to the databases used internally by the name server to store zone and cache data. + +``default`` + Logging options for those categories where no specific configuration has been defined. + +``delegation-only`` + Queries that have been forced to NXDOMAIN as the result of a delegation-only zone or a :any:`delegation-only` in a forward, hint, or stub zone declaration. + +``dispatch`` + Dispatching of incoming packets to the server modules where they are to be processed. + +``dnssec`` + DNSSEC and TSIG protocol processing. + +``dnstap`` + The :any:`dnstap` DNS traffic capture system. + +``edns-disabled`` + Log queries that have been forced to use plain DNS due to timeouts. This is often due to the remote servers not being :rfc:`1034`-compliant (not always returning FORMERR or similar to EDNS queries and other extensions to the DNS when they are not understood). In other words, this is targeted at servers that fail to respond to DNS queries that they don't understand. + + Note: the log message can also be due to packet loss. Before reporting servers for non-:rfc:`1034` compliance they should be re-tested to determine the nature of the non-compliance. This testing should prevent or reduce the number of false-positive reports. + + Note: eventually :iscman:`named` will have to stop treating such timeouts as due to :rfc:`1034` non-compliance and start treating it as plain packet loss. Falsely classifying packet loss as due to :rfc:`1034` non-compliance impacts DNSSEC validation, which requires EDNS for the DNSSEC records to be returned. + +``general`` + A catch-all for many things that still are not classified into categories. + +``lame-servers`` + Misconfigurations in remote servers, discovered by BIND 9 when trying to query those servers during resolution. + +``network`` + Network operations. + +``notify`` + The NOTIFY protocol. + +``nsid`` + NSID options received from upstream servers. + +``queries`` + A location where queries should be logged. + + At startup, specifying the category ``queries`` also enables query logging unless the :any:`querylog` option has been specified. + + The query log entry first reports a client object identifier in @0x<hexadecimal-number> format. Next, it reports the client's IP address and port number, and the query name, class, and type. Next, it reports whether the Recursion Desired flag was set (+ if set, - if not set), whether the query was signed (S), whether EDNS was in use along with the EDNS version number (E(#)), whether TCP was used (T), whether DO (DNSSEC Ok) was set (D), whether CD (Checking Disabled) was set (C), whether a valid DNS Server COOKIE was received (V), and whether a DNS COOKIE option without a valid Server COOKIE was present (K). After this, the destination address the query was sent to is reported. Finally, if any CLIENT-SUBNET option was present in the client query, it is included in square brackets in the format [ECS address/source/scope]. + + .. code-block:: none + + client @0x7f91b8005490 127.0.0.1#62536 (www.example.com): query: www.example.com IN AAAA +E(0)K (127.0.0.1) + client @0x7f91b4007400 ::1#62537 (www.example.net): query: www.example.net IN AAAA +E(0)K (::1) + + The first part of this log message, showing the client address/port number and query name, is repeated in all subsequent log messages related to the same query. + +``query-errors`` + Information about queries that resulted in some failure. + +``rate-limit`` + Start, periodic, and final notices of the rate limiting of a stream of responses that are logged at ``info`` severity in this category. These messages include a hash value of the domain name of the response and the name itself, except when there is insufficient memory to record the name for the final notice. The final notice is normally delayed until about one minute after rate limiting stops. A lack of memory can hurry the final notice, which is indicated by an initial asterisk (\*). Various internal events are logged at debug level 1 and higher. + + Rate limiting of individual requests is logged in the ``query-errors`` category. + +``resolver`` + DNS resolution, such as the recursive lookups performed on behalf of clients by a caching name server. + +``rpz`` + Information about errors in response policy zone files, rewritten responses, and, at the highest ``debug`` levels, mere rewriting attempts. + +``rpz-passthru`` + Information about RPZ PASSTHRU policy activity. This category allows pre-approved policy activity to be logged into a dedicated channel. + +``security`` + Approval and denial of requests. + +``serve-stale`` + Indication of whether a stale answer is used following a resolver failure. + +``spill`` + Queries that have been terminated, either by dropping or responding with SERVFAIL, as a result of a fetchlimit quota being exceeded. + +``sslkeylog`` + TLS pre-master secrets (for debugging purposes). + +``trust-anchor-telemetry`` + :any:`trust-anchor-telemetry` requests received by :iscman:`named`. + +``unmatched`` + Messages that :iscman:`named` was unable to determine the class of, or for which there was no matching :any:`view`. A one-line summary is also logged to the ``client`` category. This category is best sent to a file or stderr; by default it is sent to the :any:`null` channel. + +``update`` + Dynamic updates. + +``update-security`` + Approval and denial of update requests. + +``xfer-in`` + Zone transfers the server is receiving. + +``xfer-out`` + Zone transfers the server is sending. + +``zoneload`` + Loading of zones and creation of automatic empty zones. diff --git a/doc/arm/managed-keys.inc.rst b/doc/arm/managed-keys.inc.rst new file mode 100644 index 0000000..a8eb4c7 --- /dev/null +++ b/doc/arm/managed-keys.inc.rst @@ -0,0 +1,92 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _rfc5011.support: + +Dynamic Trust Anchor Management +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +BIND is able to maintain DNSSEC trust anchors using :rfc:`5011` key +management. This feature allows :iscman:`named` to keep track of changes to +critical DNSSEC keys without any need for the operator to make changes +to configuration files. + +Validating Resolver +^^^^^^^^^^^^^^^^^^^ + +To configure a validating resolver to use :rfc:`5011` to maintain a trust +anchor, configure the trust anchor using a :any:`trust-anchors` statement and +the ``initial-key`` keyword. Information about this can be found in +the :any:`trust-anchors` statement description. + +Authoritative Server +^^^^^^^^^^^^^^^^^^^^ + +To set up an authoritative zone for :rfc:`5011` trust anchor maintenance, +generate two (or more) key signing keys (KSKs) for the zone. Sign the +zone with one of them; this is the "active" KSK. All KSKs which do not +sign the zone are "stand-by" keys. + +Any validating resolver which is configured to use the active KSK as an +:rfc:`5011`-managed trust anchor takes note of the stand-by KSKs in the +zone's DNSKEY RRset, and stores them for future reference. The resolver +rechecks the zone periodically; after 30 days, if the new key is +still there, the key is accepted by the resolver as a valid +trust anchor for the zone. Anytime after this 30-day acceptance timer +has completed, the active KSK can be revoked, and the zone can be +"rolled over" to the newly accepted key. + +The easiest way to place a stand-by key in a zone is to use the "smart +signing" features of :iscman:`dnssec-keygen` and :iscman:`dnssec-signzone`. If a key +exists with a publication date in the past, but an activation date which is +unset or in the future, :option:`dnssec-signzone -S` includes the +DNSKEY record in the zone but does not sign with it: + +:: + + $ dnssec-keygen -K keys -f KSK -P now -A now+2y example.net + $ dnssec-signzone -S -K keys example.net + +To revoke a key, use the command :iscman:`dnssec-revoke`. This +adds the REVOKED bit to the key flags and regenerates the ``K*.key`` +and ``K*.private`` files. + +After revoking the active key, the zone must be signed with both the +revoked KSK and the new active KSK. Smart signing takes care of this +automatically. + +Once a key has been revoked and used to sign the DNSKEY RRset in which +it appears, that key is never again accepted as a valid trust +anchor by the resolver. However, validation can proceed using the new +active key, which was accepted by the resolver when it was a +stand-by key. + +See :rfc:`5011` for more details on key rollover scenarios. + +When a key has been revoked, its key ID changes, increasing by 128 and +wrapping around at 65535. So, for example, the key +"``Kexample.com.+005+10000``" becomes "``Kexample.com.+005+10128``". + +If two keys have IDs exactly 128 apart and one is revoked, the two +key IDs will collide, causing several problems. To prevent this, +:iscman:`dnssec-keygen` does not generate a new key if another key +which may collide is present. This checking only occurs if the new keys are +written to the same directory that holds all other keys in use for that +zone. + +Older versions of BIND 9 did not have this protection. Exercise caution +if using key revocation on keys that were generated by previous +releases, or if using keys stored in multiple directories or on multiple +machines. + +It is expected that a future release of BIND 9 will address this problem +in a different way, by storing revoked keys with their original +unrevoked key IDs. diff --git a/doc/arm/manpages.rst b/doc/arm/manpages.rst new file mode 100644 index 0000000..a833bf6 --- /dev/null +++ b/doc/arm/manpages.rst @@ -0,0 +1,48 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _manpages: + +Manual Pages +============ + +.. include:: ../../bin/tools/arpaname.rst +.. include:: ../../bin/confgen/ddns-confgen.rst +.. include:: ../../bin/delv/delv.rst +.. include:: ../../bin/dig/dig.rst +.. include:: ../../bin/dnssec/dnssec-cds.rst +.. include:: ../../bin/dnssec/dnssec-dsfromkey.rst +.. include:: ../../bin/dnssec/dnssec-importkey.rst +.. include:: ../../bin/dnssec/dnssec-keyfromlabel.rst +.. include:: ../../bin/dnssec/dnssec-keygen.rst +.. include:: ../../bin/dnssec/dnssec-revoke.rst +.. include:: ../../bin/dnssec/dnssec-settime.rst +.. include:: ../../bin/dnssec/dnssec-signzone.rst +.. include:: ../../bin/dnssec/dnssec-verify.rst +.. include:: ../../bin/tools/dnstap-read.rst +.. include:: ../../bin/plugins/filter-aaaa.rst +.. include:: ../../bin/dig/host.rst +.. include:: ../../bin/tools/mdig.rst +.. include:: ../../bin/check/named-checkconf.rst +.. include:: ../../bin/check/named-checkzone.rst +.. include:: ../../bin/check/named-compilezone.rst +.. include:: ../../bin/tools/named-journalprint.rst +.. include:: ../../bin/tools/named-nzd2nzf.rst +.. include:: ../../bin/tools/named-rrchecker.rst +.. include:: ../../bin/named/named.conf.rst +.. include:: ../../bin/named/named.rst +.. include:: ../../bin/tools/nsec3hash.rst +.. include:: ../../bin/dig/nslookup.rst +.. include:: ../../bin/nsupdate/nsupdate.rst +.. include:: ../../bin/confgen/rndc-confgen.rst +.. include:: ../../bin/rndc/rndc.conf.rst +.. include:: ../../bin/rndc/rndc.rst +.. include:: ../../bin/confgen/tsig-keygen.rst diff --git a/doc/arm/name-resolution.dia b/doc/arm/name-resolution.dia Binary files differnew file mode 100644 index 0000000..272169f --- /dev/null +++ b/doc/arm/name-resolution.dia diff --git a/doc/arm/name-resolution.png b/doc/arm/name-resolution.png Binary files differnew file mode 100644 index 0000000..1784284 --- /dev/null +++ b/doc/arm/name-resolution.png diff --git a/doc/arm/notes.rst b/doc/arm/notes.rst new file mode 100644 index 0000000..4a9e930 --- /dev/null +++ b/doc/arm/notes.rst @@ -0,0 +1,80 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +Release Notes +============= + +.. contents:: + +Introduction +------------ + +BIND 9.18 (Extended Support Version) is a stable branch of BIND. This +document summarizes significant changes since the last production +release on that branch. + +Supported Platforms +------------------- + +See the :ref:`supported_os` section in the :ref:`Requirements` chapter. + +Download +-------- + +The latest versions of BIND 9 software can always be found at +https://www.isc.org/download/. There you will find additional +information about each release, and source code. + +.. include:: ../notes/notes-known-issues.rst + +.. include:: ../notes/notes-9.18.19.rst +.. include:: ../notes/notes-9.18.18.rst +.. include:: ../notes/notes-9.18.17.rst +.. include:: ../notes/notes-9.18.16.rst +.. include:: ../notes/notes-9.18.15.rst +.. include:: ../notes/notes-9.18.14.rst +.. include:: ../notes/notes-9.18.13.rst +.. include:: ../notes/notes-9.18.12.rst +.. include:: ../notes/notes-9.18.11.rst +.. include:: ../notes/notes-9.18.10.rst +.. include:: ../notes/notes-9.18.9.rst +.. include:: ../notes/notes-9.18.8.rst +.. include:: ../notes/notes-9.18.7.rst +.. include:: ../notes/notes-9.18.6.rst +.. include:: ../notes/notes-9.18.5.rst +.. include:: ../notes/notes-9.18.4.rst +.. include:: ../notes/notes-9.18.3.rst +.. include:: ../notes/notes-9.18.2.rst +.. include:: ../notes/notes-9.18.1.rst +.. include:: ../notes/notes-9.18.0.rst + +.. _relnotes_license: + +License +------- + +BIND 9 is open source software licensed under the terms of the Mozilla Public +License, version 2.0 (see the ``COPYING`` file for the full text). + +Those wishing to discuss license compliance may contact ISC at +https://www.isc.org/contact/. + +End of Life +----------- + +BIND 9.18 (Extended Support Version) will be supported until at least +December, 2025. See https://kb.isc.org/docs/aa-00896 for details of +ISC's software support policy. + +Thank You +--------- + +Thank you to everyone who assisted us in making this release possible. diff --git a/doc/arm/pkcs11.inc.rst b/doc/arm/pkcs11.inc.rst new file mode 100644 index 0000000..5fd29d4 --- /dev/null +++ b/doc/arm/pkcs11.inc.rst @@ -0,0 +1,274 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _pkcs11: + +PKCS#11 (Cryptoki) Support +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Public Key Cryptography Standard #11 (PKCS#11) defines a +platform-independent API for the control of hardware security modules +(HSMs) and other cryptographic support devices. + +PKCS#11 uses a "provider library": a dynamically loadable +library which provides a low-level PKCS#11 interface to drive the HSM +hardware. The PKCS#11 provider library comes from the HSM vendor, and it +is specific to the HSM to be controlled. + +BIND 9 uses engine_pkcs11 for PKCS#11. engine_pkcs11 is an OpenSSL +engine which is part of the `OpenSC`_ project. The engine is dynamically +loaded into OpenSSL and the HSM is operated indirectly; any +cryptographic operations not supported by the HSM can be carried out by +OpenSSL instead. + +.. _OpenSC: https://github.com/OpenSC/libp11 + +Prerequisites +^^^^^^^^^^^^^ + +See the documentation provided by the HSM vendor for information about +installing, initializing, testing, and troubleshooting the HSM. + +Building SoftHSMv2 +^^^^^^^^^^^^^^^^^^ + +SoftHSMv2, the latest development version of SoftHSM, is available from +https://github.com/opendnssec/SoftHSMv2. It is a software library +developed by the OpenDNSSEC project (https://www.opendnssec.org) which +provides a PKCS#11 interface to a virtual HSM, implemented in the form +of an SQLite3 database on the local filesystem. It provides less security +than a true HSM, but it allows users to experiment with native PKCS#11 +when an HSM is not available. SoftHSMv2 can be configured to use either +OpenSSL or the Botan library to perform cryptographic functions, but +when using it for native PKCS#11 in BIND, OpenSSL is required. + +By default, the SoftHSMv2 configuration file is ``prefix/etc/softhsm2.conf`` +(where ``prefix`` is configured at compile time). This location can be +overridden by the SOFTHSM2_CONF environment variable. The SoftHSMv2 +cryptographic store must be installed and initialized before using it +with BIND. + +:: + + $ cd SoftHSMv2 + $ configure --with-crypto-backend=openssl --prefix=/opt/pkcs11/usr + $ make + $ make install + $ /opt/pkcs11/usr/bin/softhsm-util --init-token 0 --slot 0 --label softhsmv2 + +OpenSSL-based PKCS#11 +^^^^^^^^^^^^^^^^^^^^^ + +OpenSSL-based PKCS#11 uses engine_pkcs11 OpenSSL engine from libp11 project. + +engine_pkcs11 tries to fit the PKCS#11 API within the engine API of OpenSSL. +That is, it provides a gateway between PKCS#11 modules and the OpenSSL engine +API. One has to register the engine with OpenSSL and one has to provide the +path to the PKCS#11 module which should be gatewayed to. This can be done by +editing the OpenSSL configuration file, by engine specific controls, or by using +the p11-kit proxy module. + +It is recommended, that libp11 >= 0.4.12 is used. + +For more detailed howto including the examples, we recommend reading: + +https://gitlab.isc.org/isc-projects/bind9/-/wikis/BIND-9-PKCS11 + +Using the HSM +^^^^^^^^^^^^^ + +The canonical documentation for configuring engine_pkcs11 is in the +`libp11/README.md`_, but here's copy of working configuration for +your convenience: + +.. _`libp11/README.md`: https://github.com/OpenSC/libp11/blob/master/README.md#pkcs-11-module-configuration + +We are going to use our own custom copy of OpenSSL configuration, again it's +driven by an environment variable, this time called OPENSSL_CONF. We are +going to copy the global OpenSSL configuration (often found in +``etc/ssl/openssl.conf``) and customize it to use engines_pkcs11. + +:: + + cp /etc/ssl/openssl.cnf /opt/bind9/etc/openssl.cnf + +and export the environment variable: + +:: + + export OPENSSL_CONF=/opt/bind9/etc/openssl.cnf + +Now add following line at the top of file, before any sections (in square +brackets) are defined: + +:: + + openssl_conf = openssl_init + +And make sure there are no other 'openssl_conf = ...' lines in the file. + +Add following lines at the bottom of the file: + +:: + + [openssl_init] + engines=engine_section + + [engine_section] + pkcs11 = pkcs11_section + + [pkcs11_section] + engine_id = pkcs11 + dynamic_path = <PATHTO>/pkcs11.so + MODULE_PATH = <FULL_PATH_TO_HSM_MODULE> + init = 0 + +Key Generation +^^^^^^^^^^^^^^ + +HSM keys can now be created and used. We are going to assume that you already +have a BIND 9 installed, either from a package, or from the sources, and the +tools are readily available in the ``$PATH``. + +For generating the keys, we are going to use ``pkcs11-tool`` available from the +OpenSC suite. On both DEB-based and RPM-based distributions, the package is +called opensc. + +We need to generate at least two RSA keys: + +:: + + pkcs11-tool --module <FULL_PATH_TO_HSM_MODULE> -l -k --key-type rsa:2048 --label example.net-ksk --pin <PIN> + pkcs11-tool --module <FULL_PATH_TO_HSM_MODULE> -l -k --key-type rsa:2048 --label example.net-zsk --pin <PIN> + +Remember that each key should have unique label and we are going to use that +label to reference the private key. + +Convert the RSA keys stored in the HSM into a format that BIND 9 understands. +The :iscman:`dnssec-keyfromlabel` tool from BIND 9 can link the raw keys stored in the +HSM with the ``K<zone>+<alg>+<id>`` files. You'll need to provide the OpenSSL +engine name (``pkcs11``), the algorithm (``RSASHA256``) and the PKCS#11 label +that specify the token (we asume that it has been initialized as bind9), the +name of the PKCS#11 object (called label when generating the keys using +``pkcs11-tool``) and the HSM PIN. + +Convert the KSK: + +:: + + dnssec-keyfromlabel -E pkcs11 -a RSASHA256 -l "token=bind9;object=example.net-ksk;pin-value=0000" -f KSK example.net + +and ZSK: + +:: + + dnssec-keyfromlabel -E pkcs11 -a RSASHA256 -l "token=bind9;object=example.net-zsk;pin-value=0000" example.net + +NOTE: you can use PIN stored on disk, by specifying ``pin-source=<path_to>/<file>``, f.e.: + +:: + + (umask 0700 && echo -n 0000 > /opt/bind9/etc/pin.txt) + +and then use in the label specification: + +:: + + pin-source=/opt/bind9/etc/pin.txt + +Confirm that you have one KSK and one ZSK present in the current directory: + +:: + + ls -l K* + +The output should look like this (the second number will be different): + +:: + + Kexample.net.+008+31729.key + Kexample.net.+008+31729.private + Kexample.net.+008+42231.key + Kexample.net.+008+42231.private + +A note on generating ECDSA keys: there is a bug in libp11 when looking up a key, +that function compares keys only on their ID, not the label. So when looking up +a key it returns the first key, rather than the matching key. The workaround for +this is when creating ECDSA keys, you should specify a unique ID: + +:: + + ksk=$(echo "example.net-ksk" | openssl sha1 -r | awk '{print $1}') + zsk=$(echo "example.net-zsk" | openssl sha1 -r | awk '{print $1}') + pkcs11-tool --module <FULL_PATH_TO_HSM_MODULE> -l -k --key-type EC:prime256v1 --id $ksk --label example.net-ksk --pin <PIN> + pkcs11-tool --module <FULL_PATH_TO_HSM_MODULE> -l -k --key-type EC:prime256v1 --id $zsk --label example.net-zsk --pin <PIN> + + +Specifying the Engine on the Command Line +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +When using OpenSSL-based PKCS#11, the "engine" to be used by OpenSSL can be +specified in :iscman:`named` and all of the BIND ``dnssec-*`` tools by using the ``-E +<engine>`` command line option. Specifying the engine is generally not necessary +unless a different OpenSSL engine is used. + +The zone signing commences as usual, with only one small difference. We need to +provide the name of the OpenSSL engine using the -E command line option. + +:: + + dnssec-signzone -E pkcs11 -S -o example.net example.net + +Running :iscman:`named` With Automatic Zone Re-signing +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The zone can also be signed automatically by named. Again, we need to provide +the name of the OpenSSL engine using the :option:`-E <named -E>` command line option. + +:: + + named -E pkcs11 -c named.conf + +and the logs should have lines like: + +:: + + Fetching example.net/RSASHA256/31729 (KSK) from key repository. + DNSKEY example.net/RSASHA256/31729 (KSK) is now published + DNSKEY example.net/RSA256SHA256/31729 (KSK) is now active + Fetching example.net/RSASHA256/42231 (ZSK) from key repository. + DNSKEY example.net/RSASHA256/42231 (ZSK) is now published + DNSKEY example.net/RSA256SHA256/42231 (ZSK) is now active + +For :iscman:`named` to dynamically re-sign zones using HSM keys, +and/or to sign new records inserted via nsupdate, :iscman:`named` must +have access to the HSM PIN. In OpenSSL-based PKCS#11, this is +accomplished by placing the PIN into the ``openssl.cnf`` file (in the above +examples, ``/opt/pkcs11/usr/ssl/openssl.cnf``). + +The location of the openssl.cnf file can be overridden by setting the +``OPENSSL_CONF`` environment variable before running :iscman:`named`. + +Here is a sample ``openssl.cnf``: + +:: + + openssl_conf = openssl_def + [ openssl_def ] + engines = engine_section + [ engine_section ] + pkcs11 = pkcs11_section + [ pkcs11_section ] + PIN = <PLACE PIN HERE> + +This also allows the ``dnssec-\*`` tools to access the HSM without PIN +entry. (The ``pkcs11-\*`` tools access the HSM directly, not via OpenSSL, so +a PIN is still required to use them.) diff --git a/doc/arm/platforms.inc.rst b/doc/arm/platforms.inc.rst new file mode 100644 index 0000000..c3f6242 --- /dev/null +++ b/doc/arm/platforms.inc.rst @@ -0,0 +1,119 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _supported_os: + +Supported Platforms +------------------- + +The current support status of BIND 9 versions across various platforms can be +found in the ISC Knowledgebase: + +https://kb.isc.org/docs/supported-platforms + +In general, this version of BIND will build and run on any +POSIX-compliant system with a C11-compliant C compiler, BSD-style +sockets with RFC-compliant IPv6 support, POSIX-compliant threads, and +the :ref:`required libraries <build_dependencies>`. + +The following C11 features are used in BIND 9: + +- Atomic operations support, either in the form of C11 atomics or + **__atomic** builtin operations. + +- Thread Local Storage support, either in the form of C11 + **_Thread_local**/**thread_local**, or the **__thread** GCC + extension. + +The C11 variants are preferred. + +ISC regularly tests BIND on many operating systems and architectures, +but lacks the resources to test all of them. Consequently, ISC is only +able to offer support on a “best-effort” basis for some. + +Regularly Tested Platforms +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Current versions of BIND 9 are fully supported and regularly tested on the +following systems: + +- Debian 10, 11, 12 +- Ubuntu LTS 18.04, 20.04, 22.04 +- Fedora 38 +- Red Hat Enterprise Linux / CentOS / Oracle Linux 7, 8, 9 +- FreeBSD 12.4, 13.2 +- OpenBSD 7.3 +- Alpine Linux 3.18 + +The amd64, i386, armhf, and arm64 CPU architectures are all fully +supported. + +Best-Effort +~~~~~~~~~~~ + +The following are platforms on which BIND is known to build and run. ISC +makes every effort to fix bugs on these platforms, but may be unable to +do so quickly due to lack of hardware, less familiarity on the part of +engineering staff, and other constraints. None of these are tested +regularly by ISC. + +- macOS 10.12+ +- Solaris 11 +- NetBSD +- Other Linux distributions still supported by their vendors, such as: + + - Ubuntu 20.10+ + - Gentoo + - Arch Linux + +- OpenWRT/LEDE 17.01+ +- Other CPU architectures (mips, mipsel, sparc, …) + +Community-Maintained +~~~~~~~~~~~~~~~~~~~~ + +These systems may not all have the required dependencies for building +BIND easily available, although it is possible in many cases to +compile those directly from source. The community and interested parties +may wish to help with maintenance, and we welcome patch contributions, +although we cannot guarantee that we will accept them. All contributions +will be assessed against the risk of adverse effect on officially +supported platforms. + +- Platforms past or close to their respective EOL dates, such as: + + - Ubuntu 14.04, 16.04 (Ubuntu ESM releases are not supported) + - CentOS 6 + - Debian 8 Jessie, 9 Stretch + - FreeBSD 10.x, 11.x + +Unsupported Platforms +--------------------- + +These are platforms on which current versions of BIND 9 are known *not* to build or run: + +- Platforms without at least OpenSSL 1.0.2 +- Windows +- Solaris 10 and older +- Platforms that do not support IPv6 Advanced Socket API (RFC 3542) +- Platforms that do not support atomic operations (via compiler or + library) +- Linux without NPTL (Native POSIX Thread Library) +- Platforms on which **libuv** cannot be compiled + +Installing BIND 9 +----------------- + +:ref:`build_bind` contains complete instructions for how to build BIND 9. + +The ISC `Knowledgebase <https://kb.isc.org/>`_ contains many useful articles about installing +BIND 9 on specific platforms. + diff --git a/doc/arm/plugins.inc.rst b/doc/arm/plugins.inc.rst new file mode 100644 index 0000000..7e63995 --- /dev/null +++ b/doc/arm/plugins.inc.rst @@ -0,0 +1,85 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _module-info: + +Plugins +~~~~~~~ + +Plugins are a mechanism to extend the functionality of :iscman:`named` using +dynamically loadable libraries. By using plugins, core server +functionality can be kept simple for the majority of users; more complex +code implementing optional features need only be installed by users that +need those features. + +The plugin interface is a work in progress, and is expected to evolve as +more plugins are added. Currently, only "query plugins" are supported; +these modify the name server query logic. Other plugin types may be +added in the future. + +The only plugin currently included in BIND is :iscman:`filter-aaaa.so <filter-aaaa>`, which +replaces the ``filter-aaaa`` feature that previously existed natively as +part of :iscman:`named`. The code for this feature has been removed from +:iscman:`named` and can no longer be configured using standard :iscman:`named.conf` +syntax, but linking in the :iscman:`filter-aaaa.so <filter-aaaa>` plugin provides identical +functionality. + +Configuring Plugins +~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: plugin + :tags: server + :short: Configures plugins in :iscman:`named.conf`. + +A plugin is configured with the :any:`plugin` statement in :iscman:`named.conf`: + +:: + + plugin query "library.so" { + parameters + }; + + +In this example, file ``library.so`` is the plugin library. ``query`` +indicates that this is a query plugin. + +Multiple :any:`plugin` statements can be specified, to load different +plugins or multiple instances of the same plugin. + +``parameters`` are passed as an opaque string to the plugin's initialization +routine. Configuration syntax differs depending on the module. + +Developing Plugins +~~~~~~~~~~~~~~~~~~ + +Each plugin implements four functions: + +- ``plugin_register`` + to allocate memory, configure a plugin instance, and attach to hook + points within + :iscman:`named` + , +- ``plugin_destroy`` + to tear down the plugin instance and free memory, +- ``plugin_version`` + to check that the plugin is compatible with the current version of + the plugin API, +- ``plugin_check`` + to test syntactic correctness of the plugin parameters. + +At various locations within the :iscman:`named` source code, there are "hook +points" at which a plugin may register itself. When a hook point is +reached while :iscman:`named` is running, it is checked to see whether any +plugins have registered themselves there; if so, the associated "hook +action" - a function within the plugin library - is called. Hook +actions may examine the runtime state and make changes: for example, +modifying the answers to be sent back to a client or forcing a query to +be aborted. More details can be found in the file +``lib/ns/include/ns/hooks.h``. diff --git a/doc/arm/primary-secondary.dia b/doc/arm/primary-secondary.dia Binary files differnew file mode 100644 index 0000000..795625a --- /dev/null +++ b/doc/arm/primary-secondary.dia diff --git a/doc/arm/primary-secondary.png b/doc/arm/primary-secondary.png Binary files differnew file mode 100644 index 0000000..573cb0f --- /dev/null +++ b/doc/arm/primary-secondary.png diff --git a/doc/arm/recursive-query.dia b/doc/arm/recursive-query.dia Binary files differnew file mode 100644 index 0000000..6b16e01 --- /dev/null +++ b/doc/arm/recursive-query.dia diff --git a/doc/arm/recursive-query.png b/doc/arm/recursive-query.png Binary files differnew file mode 100644 index 0000000..0c9b20e --- /dev/null +++ b/doc/arm/recursive-query.png diff --git a/doc/arm/reference.rst b/doc/arm/reference.rst new file mode 100644 index 0000000..02f111e --- /dev/null +++ b/doc/arm/reference.rst @@ -0,0 +1,8209 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _reference: + +Configuration Reference +======================= + +The operational functionality of BIND 9 is defined using the file +**named.conf**, which is typically located in /etc or /usr/local/etc/namedb, +depending on the operating system or distribution. A further file **rndc.conf** +will be present if **rndc** is being run from a remote host, but is not required +if rndc is being run from **localhost** (the same system as BIND 9 is running +on). + +.. _named_conf: + +Configuration File (named.conf) +------------------------------- + +The file :file:`named.conf` may contain three types of entities: + +.. glossary:: + + Comment + :ref:`Multiple comment formats are supported <comment_syntax>`. + + Block + :ref:`Blocks <configuration_blocks>` are containers for :term:`statements + <Statement>` which either have common functionality - for example, + the definition of a cryptographic key in a :namedconf:ref:`key` block - or which + define the scope of the statement - for example, a statement which appears + in a :namedconf:ref:`zone` block has scope only for that zone. + + Blocks are organized hierarchically within :file:`named.conf` and may have a + number of different properties: + + - Certain blocks cannot be nested inside other blocks and thus may be + regarded as the *topmost-level* blocks: for example, the + :namedconf:ref:`options` block and the :namedconf:ref:`logging` block. + + - Certain blocks can appear multiple times, in which case they have + an associated name to disambiguate them: for example, the + :namedconf:ref:`zone` block (``zone example.com { ... };``) or the + :namedconf:ref:`key` block (``key mykey { ... };``). + + - Certain blocks may be "nested" within other blocks. For example, the + :namedconf:ref:`zone` block may appear within a + :namedconf:ref:`view` block. + + The description of each block in this manual lists its permissible locations. + + Statement + - Statements define and control specific BIND behaviors. + - Statements may have a single parameter (a **Value**) or multiple parameters + (**Argument/Value** pairs). For example, the :any:`recursion` statement takes a + single value parameter - in this case, the string ``yes`` or ``no`` + (``recursion yes;``) - while the :namedconf:ref:`port` statement takes a numeric value + defining the DNS port number (``port 53;``). More complex statements take one or + more argument/value pairs. The :any:`also-notify` statement may take a number + of such argument/value pairs, such as ``also-notify port 5353;``, + where ``port`` is the argument and ``5353`` is the corresponding value. + - Statements can appear in a single :term:`block <Block>` - for + example, an :namedconf:ref:`algorithm` statement can appear only in a + :namedconf:ref:`key` block - or in multiple blocks - for example, an + :any:`also-notify` statement can appear in an :namedconf:ref:`options` + block where it has global (server-wide) scope, in a :any:`zone` + block where it has scope only for the specific zone (and overrides + any global statement), or even in a :any:`view` block where it has + scope for only that view (and overrides any global statement). + +The file :file:`named.conf` may further contain one or more instances of the +:ref:`include <include_grammar>` **Directive**. This directive is provided for +administrative convenience in assembling a complete :file:`named.conf` file and plays +no subsequent role in BIND 9 operational characteristics or functionality. + +.. Note:: + Over a period of many years the BIND ARM acquired a bewildering array of + terminology. Many of the terms used described similar concepts and served + only to add a layer of complexity, possibly confusion, and perhaps mystique + to BIND 9 configuration. The ARM now uses only the terms **Block**, + **Statement**, **Argument**, **Value**, and **Directive** to describe all + entities used in BIND 9 configuration. + +.. _comment_syntax: + +Comment Syntax +~~~~~~~~~~~~~~ + +The BIND 9 comment syntax allows comments to appear anywhere that +whitespace may appear in a BIND configuration file. To appeal to +programmers of all kinds, they can be written in the C, C++, or +shell/Perl style. + +Syntax +^^^^^^ + +.. code-block:: none + + /* This is a BIND comment as in C */ + +.. code-block:: none + + // This is a BIND comment as in C++ + +.. code-block:: none + + # This is a BIND comment as in common Unix shells + # and Perl + +Definition and Usage +^^^^^^^^^^^^^^^^^^^^ + +Comments can be inserted anywhere that whitespace may appear in a BIND +configuration file. + +C-style comments start with the two characters /\* (slash, star) and end +with \*/ (star, slash). Because they are completely delimited with these +characters, they can be used to comment only a portion of a line or to +span multiple lines. + +C-style comments cannot be nested. For example, the following is not +valid because the entire comment ends with the first \*/: + +.. code-block:: none + + /* This is the start of a comment. + This is still part of the comment. + /* This is an incorrect attempt at nesting a comment. */ + This is no longer in any comment. */ + +C++-style comments start with the two characters // (slash, slash) and +continue to the end of the physical line. They cannot be continued +across multiple physical lines; to have one logical comment span +multiple lines, each line must use the // pair. For example: + +.. code-block:: none + + // This is the start of a comment. The next line + // is a new comment, even though it is logically + // part of the previous comment. + +Shell-style (or Perl-style) comments start with the +character ``#`` (number/pound sign) and continue to the end of the physical +line, as in C++ comments. For example: + +.. code-block:: none + + # This is the start of a comment. The next line + # is a new comment, even though it is logically + # part of the previous comment. + +.. warning:: + + The semicolon (``;``) character cannot start a comment, unlike + in a zone file. The semicolon indicates the end of a + configuration statement. + +Configuration Layout Styles +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +BIND is very picky about opening and closing brackets/braces, semicolons, and +all the other separators defined in the formal syntaxes in later sections. +There are many layout styles that can assist in minimizing errors, as shown in +the following examples: + +.. code-block:: none + + // dense single-line style + zone "example.com" in{type secondary; file "secondary.example.com"; primaries {10.0.0.1;};}; + // single-statement-per-line style + zone "example.com" in{ + type secondary; + file "secondary.example.com"; + primaries {10.0.0.1;}; + }; + // spot the difference + zone "example.com" in{ + type secondary; + file "sec.secondary.com"; + primaries {10.0.0.1;}; }; + +.. _include_grammar: + +``include`` Directive +~~~~~~~~~~~~~~~~~~~~~ + +.. code-block:: none + + include filename; + +.. _include_statement: + +``include`` Directive Definition and Usage +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The include directive inserts the specified file (or files if a valid `glob +expression`_ is detected) at the point where the include directive is +encountered. The include directive facilitates the administration of +configuration files by permitting the reading or writing of some things but not +others. For example, the statement could include private keys that are readable +only by the name server. + +.. _`glob expression`: https://man7.org/linux/man-pages/man7/glob.7.html + +.. _address_match_lists: + +Address Match Lists +~~~~~~~~~~~~~~~~~~~ + +Syntax +^^^^^^ + +An address match list is a list of semicolon-separated :term:`address_match_element` s. + +:: + + { <address_match_element>; ... }; + +Each element is then defined as: + +.. glossary:: + + ``address_match_element`` + + :: + + [ ! ] ( <ip_address> | <netprefix> | key <server_key> | <acl_name> | { address_match_list } ) + +Definition and Usage +^^^^^^^^^^^^^^^^^^^^ + +Address match lists are primarily used to determine access control for +various server operations. They are also used in the :any:`listen-on` and +:any:`sortlist` statements. The elements which constitute an address match +list can be any of the following: + +- :term:`ip_address`: an IP address (IPv4 or IPv6) + +- :term:`netprefix`: an IP prefix (in ``/`` notation) + +- :term:`server_key`: a key ID, as defined by the ``key`` statement + +- :term:`acl_name`: the name of an address match list defined with the :any:`acl` statement + +- a nested address match list enclosed in braces + +Elements can be negated with a leading exclamation mark (``!``), and the +match list names "any", "none", "localhost", and "localnets" are +predefined. More information on those names can be found in the +description of the :any:`acl` statement. + +The addition of the key clause made the name of this syntactic element +something of a misnomer, since security keys can be used to validate +access without regard to a host or network address. Nonetheless, the +term "address match list" is still used throughout the documentation. + +When a given IP address or prefix is compared to an address match list, +the comparison takes place in approximately O(1) time. However, key +comparisons require that the list of keys be traversed until a matching +key is found, and therefore may be somewhat slower. + +The interpretation of a match depends on whether the list is being used +for access control, defining :any:`listen-on` ports, or in a :any:`sortlist`, +and whether the element was negated. + +When used as an access control list, a non-negated match allows access +and a negated match denies access. If there is no match, access is +denied. The clauses :any:`allow-notify`, :any:`allow-recursion`, +:any:`allow-recursion-on`, :any:`allow-query`, :any:`allow-query-on`, +:any:`allow-query-cache`, :any:`allow-query-cache-on`, :any:`allow-transfer`, +:any:`allow-update`, :any:`allow-update-forwarding`, :any:`blackhole`, and +:any:`keep-response-order` all use address match lists. Similarly, the +:any:`listen-on` option causes the server to refuse queries on any of +the machine's addresses which do not match the list. + +Order of insertion is significant. If more than one element in an ACL is +found to match a given IP address or prefix, preference is given to +the one that came *first* in the ACL definition. Because of this +first-match behavior, an element that defines a subset of another +element in the list should come before the broader element, regardless +of whether either is negated. For example, in ``1.2.3/24; ! 1.2.3.13;`` +the 1.2.3.13 element is completely useless because the algorithm +matches any lookup for 1.2.3.13 to the 1.2.3/24 element. Using +``! 1.2.3.13; 1.2.3/24`` fixes that problem by blocking 1.2.3.13 +via the negation, but all other 1.2.3.\* hosts pass through. + + +Glossary of Terms Used +~~~~~~~~~~~~~~~~~~~~~~ + +Following is a list of terms used throughout the BIND configuration +file documentation: + +.. glossary:: + + ``acl_name`` + The name of an :term:`address_match_list` as defined by the :any:`acl` statement. + + ``address_match_list`` + See :ref:`address_match_lists`. + + ``boolean`` + Either ``yes`` or ``no``. The words ``true`` and ``false`` are also accepted, as are the numbers ``1`` and ``0``. + + ``domain_name`` + A quoted string which is used as a DNS name; for example: ``my.test.domain``. + + ``duration`` + A duration in BIND 9 can be written in three ways: as single number + representing seconds, as a string of numbers with TTL-style + time-unit suffixes, or in ISO 6801 duration format. + + Allowed TTL time-unit suffixes are: "W" (week), "D" (day), "H" (hour), + "M" (minute), and "S" (second). Examples: "1W" (1 week), "3d12h" + (3 days, 12 hours). + + ISO 8601 duration format consists of the letter "P", followed by an + optional series of numbers with unit suffixes "Y" (year), "M" (month), + "W" (week), and "D" (day); this may optionally be followed by the + letter "T", and another series of numbers with unit suffixes + "H" (hour), "M" (minute), and "S" (second). Examples: "P3M10D" + (3 months, 10 days), "P2WT12H" (2 weeks, 12 hours), "pt15m" + (15 minutes). For more information on ISO 8601 duration format, + see :rfc:`3339`, appendix A. + + Both TTL-style and ISO 8601 duration formats are case-insensitive. + + ``fixedpoint`` + A non-negative real number that can be specified to the nearest one-hundredth. Up to five digits can be specified before a decimal point, and up to two digits after, so the maximum value is 99999.99. Acceptable values might be further limited by the contexts in which they are used. + + ``integer`` + A non-negative 32-bit integer (i.e., a number between 0 and 4294967295, inclusive). Its acceptable value might be further limited by the context in which it is used. + + ``ip_address`` + An :term:`ipv4_address` or :term:`ipv6_address`. + + ``ipv4_address`` + An IPv4 address with exactly four integer elements valued 0 through 255 + and separated by dots (``.``), such as ``192.168.1.1`` (a + "dotted-decimal" notation with all four elements present). + + ``ipv6_address`` + An IPv6 address, such as ``2001:db8::1234``. IPv6-scoped addresses that have ambiguity on their scope zones must be disambiguated by an appropriate zone ID with the percent character (``%``) as a delimiter. It is strongly recommended to use string zone names rather than numeric identifiers, to be robust against system configuration changes. However, since there is no standard mapping for such names and identifier values, only interface names as link identifiers are supported, assuming one-to-one mapping between interfaces and links. For example, a link-local address ``fe80::1`` on the link attached to the interface ``ne0`` can be specified as ``fe80::1%ne0``. Note that on most systems link-local addresses always have ambiguity and need to be disambiguated. + + ``netprefix`` + An IP network specified as an :term:`ip_address`, followed by a slash (``/``) and then the number of bits in the netmask. Trailing zeros in an :term:`ip_address` may be omitted. For example, ``127/8`` is the network ``127.0.0.0`` with netmask ``255.0.0.0`` and ``1.2.3.0/28`` is network ``1.2.3.0`` with netmask ``255.255.255.240``. + When specifying a prefix involving an IPv6-scoped address, the scope may be omitted. In that case, the prefix matches packets from any scope. + + ``percentage`` + An integer value followed by ``%`` to represent percent. + + ``port`` + An IP port :term:`integer`. It is limited to 0 through 65535, with values below 1024 typically restricted to use by processes running as root. In some cases, an asterisk (``*``) character can be used as a placeholder to select a random high-numbered port. + + ``portrange`` + A list of a :term:`port` or a port range. A port range is specified in the form of ``range`` followed by two :term:`port` s, ``port_low`` and ``port_high``, which represents port numbers from ``port_low`` through ``port_high``, inclusive. ``port_low`` must not be larger than ``port_high``. For example, ``range 1024 65535`` represents ports from 1024 through 65535. The asterisk (``*``) character is not allowed as a valid :term:`port` or as a port range boundary. + + ``remote-servers`` + A named list of one or more :term:`ip_address` es with optional :term:`tls_id`, :term:`server_key`, and/or :term:`port`. A ``remote-servers`` list may include other ``remote-servers`` lists. See :any:`primaries` block. + + ``server_key`` + A :term:`domain_name` representing the name of a shared key, to be used for + :ref:`transaction security <tsig>`. Keys are defined using + :namedconf:ref:`key` blocks. + + ``size`` + ``sizeval`` + A 64-bit unsigned integer. Integers may take values 0 <= value <= 18446744073709551615, though certain parameters (such as :any:`max-journal-size`) may use a more limited range within these extremes. In most cases, setting a value to 0 does not literally mean zero; it means "undefined" or "as big as possible," depending on the context. See the explanations of particular parameters that use ``size`` for details on how they interpret its use. Numeric values can optionally be followed by a scaling factor: ``K`` or ``k`` for kilobytes, ``M`` or ``m`` for megabytes, and ``G`` or ``g`` for gigabytes, which scale by 1024, 1024*1024, and 1024*1024*1024 respectively. + + Some statements also accept the keywords ``unlimited`` or ``default``: + ``unlimited`` generally means "as big as possible," and is usually the best way to safely set a very large number. + ``default`` uses the limit that was in force when the server was started. + + ``tls_id`` + A named TLS configuration object which defines a TLS key and certificate. See :any:`tls` block. + + +.. _configuration_file_grammar: + +.. _configuration_blocks: + +Blocks +------ + +A BIND 9 configuration consists of blocks, statements, and comments. + +The following blocks are supported: + + :any:`acl` + Defines a named IP address matching list, for access control and other uses. + + :any:`controls` + Declares control channels to be used by the :iscman:`rndc` utility. + + :any:`dnssec-policy` + Describes a DNSSEC key and signing policy for zones. See :any:`dnssec-policy` for details. + + :namedconf:ref:`key` + Specifies key information for use in authentication and authorization using TSIG. + + :any:`logging` + Specifies what information the server logs and where the log messages are sent. + + ``masters`` + Synonym for :any:`primaries`. + + :namedconf:ref:`options` + Controls global server configuration options and sets defaults for other statements. + + :any:`parental-agents` + Defines a named list of servers for inclusion in primary and secondary zones' :any:`parental-agents` lists. + + :any:`primaries` + Defines a named list of servers for inclusion in stub and secondary zones' :any:`primaries` or :any:`also-notify` lists. (Note: this is a synonym for the original keyword ``masters``, which can still be used, but is no longer the preferred terminology.) + + :namedconf:ref:`server` + Sets certain configuration options on a per-server basis. + + :any:`statistics-channels` + Declares communication channels to get access to :iscman:`named` statistics. + + :any:`tls` + Specifies configuration information for a TLS connection, including a :any:`key-file`, :any:`cert-file`, :any:`ca-file`, :any:`dhparam-file`, :any:`remote-hostname`, :any:`ciphers`, :any:`protocols`, :any:`prefer-server-ciphers`, and :any:`session-tickets`. + + :any:`http` + Specifies configuration information for an HTTP connection, including :any:`endpoints`, :any:`listener-clients`, and :any:`streams-per-connection`. + + :any:`trust-anchors` + Defines DNSSEC trust anchors: if used with the ``initial-key`` or ``initial-ds`` keyword, trust anchors are kept up-to-date using :rfc:`5011` trust anchor maintenance; if used with ``static-key`` or ``static-ds``, keys are permanent. + + :any:`managed-keys` + Is identical to :any:`trust-anchors`; this option is deprecated in favor of :any:`trust-anchors` with the ``initial-key`` keyword, and may be removed in a future release. + + :any:`trusted-keys` + Defines permanent trusted DNSSEC keys; this option is deprecated in favor of :any:`trust-anchors` with the ``static-key`` keyword, and may be removed in a future release. + + :any:`view` + Defines a view. + + :any:`zone` + Defines a zone. + +The :any:`logging` and :namedconf:ref:`options` statements may only occur once per +configuration. + +:any:`acl` Block Grammar +~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. namedconf:statement:: acl + :tags: server + :short: Assigns a symbolic name to an address match list. + +:any:`acl` Block Definition and Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The :any:`acl` statement assigns a symbolic name to an address match list. +It gets its name from one of the primary uses of address match lists: Access +Control Lists (ACLs). + +The following ACLs are built-in: + + ``any`` + Matches all hosts. + + ``none`` + Matches no hosts. + + ``localhost`` + Matches the IPv4 and IPv6 addresses of all network interfaces on the system. When addresses are added or removed, the ``localhost`` ACL element is updated to reflect the changes. + + ``localnets`` + Matches any host on an IPv4 or IPv6 network for which the system has an interface. When addresses are added or removed, the ``localnets`` ACL element is updated to reflect the changes. Some systems do not provide a way to determine the prefix lengths of local IPv6 addresses; in such cases, ``localnets`` only matches the local IPv6 addresses, just like ``localhost``. + +:any:`controls` Block Grammar +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: controls + :tags: server + :short: Specifies control channels to be used to manage the name server. + +:any:`controls` Block Definition and Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The :any:`controls` statement declares control channels to be used by +system administrators to manage the operation of the name server. These +control channels are used by the :iscman:`rndc` utility to send commands to +and retrieve non-DNS results from a name server. + +.. namedconf:statement:: unix + :tags: server + :short: Specifies a Unix domain socket as a control channel. + + A :any:`unix` control channel is a Unix domain socket listening at the + specified path in the file system. Access to the socket is specified by + the ``perm``, ``owner``, and ``group`` clauses. Note that on some platforms + (SunOS and Solaris), the permissions (``perm``) are applied to the parent + directory as the permissions on the socket itself are ignored. + + +.. namedconf:statement:: inet + :tags: server + :short: Specifies a TCP socket as a control channel. + + An :any:`inet` control channel is a TCP socket listening at the specified + :term:`port` on the specified :term:`ip_address`, which can be an IPv4 or IPv6 + address. An :term:`ip_address` of ``*`` (asterisk) is interpreted as the IPv4 + wildcard address; connections are accepted on any of the system's + IPv4 addresses. To listen on the IPv6 wildcard address, use an + :term:`ip_address` of ``::``. If :iscman:`rndc` is only used on the local host, + using the loopback address (``127.0.0.1`` or ``::1``) is recommended for + maximum security. + + If no port is specified, port 953 is used. The asterisk ``*`` cannot + be used for :term:`port`. + + The ability to issue commands over the control channel is restricted by + the ``allow`` and :any:`keys` clauses. + + ``allow`` + Connections to the control channel + are permitted based on the :term:`address_match_list`. This is for simple IP + address-based filtering only; any :term:`server_key` elements of the + :term:`address_match_list` are ignored. + + :any:`keys` + The primary authorization mechanism of the command channel is the + list of :term:`server_key` s. Each listed + :namedconf:ref:`key` is authorized to execute commands over the control + channel. See :ref:`admin_tools` for information about + configuring keys in :iscman:`rndc`. + + +``read-only`` + If the ``read-only`` argument is ``on``, the control channel is limited + to the following set of read-only commands: ``nta -dump``, :any:`null`, + ``status``, ``showzone``, ``testgen``, and ``zonestatus``. By default, + ``read-only`` is not enabled and the control channel allows read-write + access. + +If no :any:`controls` statement is present, :iscman:`named` sets up a default +control channel listening on the loopback address 127.0.0.1 and its IPv6 +counterpart, ::1. In this case, and also when the :any:`controls` statement +is present but does not have a :any:`keys` clause, :iscman:`named` attempts +to load the command channel key from the file |rndc_key|. +To create an ``rndc.key`` file, run :option:`rndc-confgen -a`. + +To disable the command channel, use an empty :any:`controls` statement: +``controls { };``. + + +``key`` Block Grammar +~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: key + :tags: security + :short: Defines a shared secret key for use with :ref:`tsig` or the command channel. + +``key`` Block Definition and Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The ``key`` statement defines a shared secret key for use with TSIG (see +:ref:`tsig`) or the command channel (see :any:`controls`). + +The ``key`` statement can occur at the top level of the configuration +file or inside a :any:`view` statement. Keys defined in top-level ``key`` +statements can be used in all views. Keys intended for use in a +:any:`controls` statement must be defined at the top level. + +The :term:`server_key`, also known as the key name, is a domain name that uniquely +identifies the key. It can be used in a :namedconf:ref:`server` statement to cause +requests sent to that server to be signed with this key, or in address +match lists to verify that incoming requests have been signed with a key +matching this name, algorithm, and secret. + +.. namedconf:statement:: algorithm + :tags: security + :short: Defines the algorithm to be used in a key clause. + + The ``algorithm_id`` is a string that specifies a security/authentication + algorithm. The :iscman:`named` server supports ``hmac-md5``, ``hmac-sha1``, + ``hmac-sha224``, ``hmac-sha256``, ``hmac-sha384``, and ``hmac-sha512`` + TSIG authentication. Truncated hashes are supported by appending the + minimum number of required bits preceded by a dash, e.g., + ``hmac-sha1-80``. + +.. namedconf:statement:: secret + :tags: security + :short: Defines a Base64-encoded string to be used as the secret by the algorithm. + + The ``secret_string`` is the secret to be used by the + algorithm, and is treated as a Base64-encoded string. + +:any:`logging` Block Grammar +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: logging + :tags: logging + :short: Configures logging options for the name server. + +:any:`logging` Block Definition and Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The :any:`logging` statement configures a wide variety of logging options +for the name server. Its :any:`channel` phrase associates output methods, +format options, and severity levels with a name that can then be used +with the :any:`category` phrase to select how various classes of messages +are logged. + +Only one :any:`logging` statement is used to define as many channels and +categories as desired. If there is no :any:`logging` statement, the +logging configuration is: + +:: + + logging { + category default { default_syslog; default_debug; }; + category unmatched { null; }; + }; + +If :iscman:`named` is started with the :option:`-L <named -L>` option, it logs to the specified +file at startup, instead of using syslog. In this case the logging +configuration is: + +:: + + logging { + category default { default_logfile; default_debug; }; + category unmatched { null; }; + }; + +The logging configuration is only established when the entire +configuration file has been parsed. When the server starts up, all +logging messages regarding syntax errors in the configuration file go to +the default channels, or to standard error if the :option:`-g <named -g>` option was +specified. + +The :any:`channel` Phrase +^^^^^^^^^^^^^^^^^^^^^^^^^ +.. namedconf:statement:: channel + :tags: logging + :short: Defines a stream of data that can be independently logged. + +All log output goes to one or more ``channels``; there is no limit to +the number of channels that can be created. + +Every channel definition must include a destination clause that says +whether messages selected for the channel go to a file, go to a particular +syslog facility, go to the standard error stream, or are discarded. The definition can +optionally also limit the message severity level that is accepted +by the channel (the default is ``info``), and whether to include a +:iscman:`named`-generated time stamp, the category name, and/or the severity level +(the default is not to include any). + +.. namedconf:statement:: null + :tags: logging + :short: Causes all messages sent to the logging channel to be discarded. + + The :any:`null` destination clause causes all messages sent to the channel + to be discarded; in that case, other options for the channel are + meaningless. + +``file`` + The ``file`` destination clause directs the channel to a disk file. It + can include additional arguments to specify how large the file is + allowed to become before it is rolled to a backup file (``size``), how + many backup versions of the file are saved each time this happens + (``versions``), and the format to use for naming backup versions + (``suffix``). + + The ``size`` option is used to limit log file growth. If the file ever + exceeds the specified size, then :iscman:`named` stops writing to the file + unless it has a ``versions`` option associated with it. If backup + versions are kept, the files are rolled as described below. If there is + no ``versions`` option, no more data is written to the log until + some out-of-band mechanism removes or truncates the log to less than the + maximum size. The default behavior is not to limit the size of the file. + + File rolling only occurs when the file exceeds the size specified with + the ``size`` option. No backup versions are kept by default; any + existing log file is simply appended. The ``versions`` option specifies + how many backup versions of the file should be kept. If set to + ``unlimited``, there is no limit. + + The ``suffix`` option can be set to either ``increment`` or + ``timestamp``. If set to ``timestamp``, then when a log file is rolled, + it is saved with the current timestamp as a file suffix. If set to + ``increment``, then backup files are saved with incrementing numbers as + suffixes; older files are renamed when rolling. For example, if + ``versions`` is set to 3 and ``suffix`` to ``increment``, then when + ``filename.log`` reaches the size specified by ``size``, + ``filename.log.1`` is renamed to ``filename.log.2``, ``filename.log.0`` + is renamed to ``filename.log.1``, and ``filename.log`` is renamed to + ``filename.log.0``, whereupon a new ``filename.log`` is opened. + + Here is an example using the ``size``, ``versions``, and ``suffix`` options: + + :: + + channel an_example_channel { + file "example.log" versions 3 size 20m suffix increment; + print-time yes; + print-category yes; + }; + +.. namedconf:statement:: syslog + :tags: logging + :short: Directs the logging channel to the system log. + + The :any:`syslog` destination clause directs the channel to the system log. + Its argument is a syslog facility as described in the :any:`syslog` man + page. Known facilities are ``kern``, ``user``, ``mail``, ``daemon``, + ``auth``, :any:`syslog`, ``lpr``, ``news``, ``uucp``, ``cron``, + ``authpriv``, ``ftp``, ``local0``, ``local1``, ``local2``, ``local3``, + ``local4``, ``local5``, ``local6``, and ``local7``; however, not all + facilities are supported on all operating systems. How :any:`syslog` + handles messages sent to this facility is described in the + ``syslog.conf`` man page. On a system which uses a very old + version of :any:`syslog`, which only uses two arguments to the ``openlog()`` + function, this clause is silently ignored. + +.. namedconf:statement:: severity + :tags: logging + :short: Defines the priority level of log messages. + + The :any:`severity` clause works like :any:`syslog`'s "priorities," except + that they can also be used when writing straight to a file rather + than using :any:`syslog`. Messages which are not at least of the severity + level given are not selected for the channel; messages of higher + severity levels are accepted. + + When using :any:`syslog`, the ``syslog.conf`` priorities + also determine what eventually passes through. For example, defining a + channel facility and severity as ``daemon`` and ``debug``, but only + logging ``daemon.warning`` via ``syslog.conf``, causes messages of + severity ``info`` and ``notice`` to be dropped. If the situation were + reversed, with :iscman:`named` writing messages of only ``warning`` or higher, + then ``syslogd`` would print all messages it received from the channel. + +.. namedconf:statement:: stderr + :tags: logging + :short: Directs the logging channel output to the server's standard error stream. + + The :any:`stderr` destination clause directs the channel to the server's + standard error stream. This is intended for use when the server is + running as a foreground process, as when debugging a + configuration, for example. + +The server can supply extensive debugging information when it is in +debugging mode. If the server's global debug level is greater than zero, +debugging mode is active. The global debug level is set either +by starting the :iscman:`named` server with the :option:`-d <named -d>` flag followed by a +positive integer, or by running :option:`rndc trace`. The global debug level +can be set to zero, and debugging mode turned off, by running ``rndc +notrace``. All debugging messages in the server have a debug level; +higher debug levels give more detailed output. Channels that specify a +specific debug severity, for example: + +:: + + channel specific_debug_level { + file "foo"; + severity debug 3; + }; + +get debugging output of level 3 or less any time the server is in +debugging mode, regardless of the global debugging level. Channels with +``dynamic`` severity use the server's global debug level to determine +what messages to print. + +.. namedconf:statement:: print-time + :tags: logging + :short: Specifies the time format for log messages. + + :any:`print-time` can be set to ``yes``, ``no``, or a time format + specifier, which may be one of ``local``, ``iso8601``, or + ``iso8601-utc``. If set to ``no``, the date and time are not + logged. If set to ``yes`` or ``local``, the date and time are logged in + a human-readable format, using the local time zone. If set to + ``iso8601``, the local time is logged in ISO 8601 format. If set to + ``iso8601-utc``, the date and time are logged in ISO 8601 format, + with time zone set to UTC. The default is ``no``. + + :any:`print-time` may be specified for a :any:`syslog` channel, but it is + usually pointless since :any:`syslog` also logs the date and time. + +.. namedconf:statement:: print-category + :tags: logging + :short: Includes the category in log messages. + + If :any:`print-category` is requested, then the category of the message + is logged as well. + +.. namedconf:statement:: print-severity + :tags: logging + :short: Includes the severity in log messages. + + If :any:`print-severity` is on, then the + severity level of the message is logged. The ``print-`` options may + be used in any combination, and are always printed in the following + order: time, category, severity. + +Here is an example where all three ``print-`` options are on: + +``28-Feb-2000 15:05:32.863 general: notice: running`` + +.. namedconf:statement:: buffered + :tags: logging + :short: Controls flushing of log messages. + + If :any:`buffered` has been turned on, the output to files is not + flushed after each log entry. By default all log messages are flushed. + +There are four predefined channels that are used for :iscman:`named`'s default +logging, as follows. If :iscman:`named` is started with the :option:`-L <named -L>` option, then a fifth +channel, ``default_logfile``, is added. How they are used is described in +:any:`category`. + +:: + + channel default_syslog { + // send to syslog's daemon facility + syslog daemon; + // only send priority info and higher + severity info; + }; + + channel default_debug { + // write to named.run in the working directory + // Note: stderr is used instead of "named.run" if + // the server is started with the '-g' option. + file "named.run"; + // log at the server's current debug level + severity dynamic; + }; + + channel default_stderr { + // writes to stderr + stderr; + // only send priority info and higher + severity info; + }; + + channel null { + // toss anything sent to this channel + null; + }; + + channel default_logfile { + // this channel is only present if named is + // started with the -L option, whose argument + // provides the file name + file "..."; + // log at the server's current debug level + severity dynamic; + }; + +The ``default_debug`` channel has the special property that it only +produces output when the server's debug level is non-zero. It normally +writes to a file called ``named.run`` in the server's working directory. + +For security reasons, when the :option:`-u <named -u>` command-line option is used, the +``named.run`` file is created only after :iscman:`named` has changed to the +new UID, and any debug output generated while :iscman:`named` is starting - +and still running as root - is discarded. To capture this +output, run the server with the :option:`-L <named -L>` option to specify a +default logfile, or the :option:`-g <named -g>` option to log to standard error which can +be redirected to a file. + +Once a channel is defined, it cannot be redefined. The +built-in channels cannot be altered directly, but the default logging +can be modified by pointing categories at defined channels. + +The :any:`category` Phrase +^^^^^^^^^^^^^^^^^^^^^^^^^^ +There are many categories, so desired logs can be sent anywhere +while unwanted logs are ignored. If +a list of channels is not specified for a category, log messages in that +category are sent to the ``default`` category instead. If no +default category is specified, the following "default default" is used: + +:: + + category default { default_syslog; default_debug; }; + +If :iscman:`named` is started with the :option:`-L <named -L>` option, the default category +is: + +:: + + category default { default_logfile; default_debug; }; + +As an example, let's say a user wants to log security events to a file, but +also wants to keep the default logging behavior. They would specify the +following: + +:: + + channel my_security_channel { + file "my_security_file"; + severity info; + }; + category security { + my_security_channel; + default_syslog; + default_debug; + }; + + +To discard all messages in a category, specify the :namedconf:ref:`null` channel: + +:: + + category xfer-out { null; }; + category notify { null; }; + +.. namedconf:statement:: category + :tags: logging + :short: Specifies the type of data logged to a particular channel. + +The following are the available categories and brief descriptions of the +types of log information they contain. More categories may be added in +future BIND releases. + +.. include:: logging-categories.inc.rst + +.. _query_errors: + +The ``query-errors`` Category +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The ``query-errors`` category is used to indicate why and how specific queries +resulted in responses which indicate an error. Normally, these messages are +logged at ``debug`` logging levels; note, however, that if query logging is +active, some are logged at ``info``. The logging levels are described below: + +At ``debug`` level 1 or higher - or at ``info`` when query logging is +active - each response with the rcode of SERVFAIL is logged as follows: + +``client 127.0.0.1#61502: query failed (SERVFAIL) for www.example.com/IN/AAAA at query.c:3880`` + +This means an error resulting in SERVFAIL was detected at line 3880 of source +file ``query.c``. Log messages of this level are particularly helpful in identifying +the cause of SERVFAIL for an authoritative server. + +At ``debug`` level 2 or higher, detailed context information about recursive +resolutions that resulted in SERVFAIL is logged. The log message looks +like this: + +:: + + fetch completed at resolver.c:2970 for www.example.com/A + in 10.000183: timed out/success [domain:example.com, + referral:2,restart:7,qrysent:8,timeout:5,lame:0,quota:0,neterr:0, + badresp:1,adberr:0,findfail:0,valfail:0] + +The first part before the colon shows that a recursive resolution for +AAAA records of www.example.com completed in 10.000183 seconds, and the +final result that led to the SERVFAIL was determined at line 2970 of +source file ``resolver.c``. + +The next part shows the detected final result and the latest result of +DNSSEC validation. The latter is always "success" when no validation attempt +was made. In this example, this query probably resulted in SERVFAIL because all +name servers are down or unreachable, leading to a timeout in 10 seconds. +DNSSEC validation was probably not attempted. + +The last part, enclosed in square brackets, shows statistics collected for this +particular resolution attempt. The ``domain`` field shows the deepest zone that +the resolver reached; it is the zone where the error was finally detected. The +meaning of the other fields is summarized in the following list. + +``referral`` + The number of referrals the resolver received throughout the resolution process. In the above ``example.com`` there are two. + +``restart`` + The number of cycles that the resolver tried remote servers at the ``domain`` zone. In each cycle, the resolver sends one query (possibly resending it, depending on the response) to each known name server of the ``domain`` zone. + +``qrysent`` + The number of queries the resolver sent at the ``domain`` zone. + +``timeout`` + The number of timeouts the resolver received since the last response. + +``lame`` + The number of lame servers the resolver detected at the ``domain`` zone. A server is detected to be lame either by an invalid response or as a result of lookup in BIND 9's address database (ADB), where lame servers are cached. + +``quota`` + The number of times the resolver was unable to send a query because it had exceeded the permissible fetch quota for a server. + +``neterr`` + The number of erroneous results that the resolver encountered in sending queries at the ``domain`` zone. One common case is when the remote server is unreachable and the resolver receives an "ICMP unreachable" error message. + +``badresp`` + The number of unexpected responses (other than ``lame``) to queries sent by the resolver at the ``domain`` zone. + +``adberr`` + Failures in finding remote server addresses of the``domain`` zone in the ADB. One common case of this is that the remote server's name does not have any address records. + +``findfail`` + Failures to resolve remote server addresses. This is a total number of failures throughout the resolution process. + +``valfail`` + Failures of DNSSEC validation. Validation failures are counted throughout the resolution process (not limited to the ``domain`` zone), but should only happen in ``domain``. + +At ``debug`` level 3 or higher, the same messages as those at +``debug`` level 1 are logged for errors other than +SERVFAIL. Note that negative responses such as NXDOMAIN are not errors, and are +not logged at this debug level. + +At ``debug`` level 4 or higher, the detailed context information logged at +``debug`` level 2 is logged for errors other than SERVFAIL and for negative +responses such as NXDOMAIN. + +:any:`parental-agents` Block Grammar +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: parental-agents + :tags: zone + :short: Defines a list of delegation agents to be used by primary and secondary zones. + +:any:`parental-agents` Block Definition and Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +:any:`parental-agents` lists allow for a common set of parental agents to be easily +used by multiple primary and secondary zones. +A parental agent is the entity that is allowed to +change a zone's delegation information (defined in :rfc:`7344`). + +:any:`primaries` Block Grammar +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: primaries + :tags: zone + :short: Defines one or more primary servers for a zone. + +:any:`primaries` Block Definition and Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +:any:`primaries` lists allow for a common set of primary servers to be easily +used by multiple stub and secondary zones in their :any:`primaries` or +:any:`also-notify` lists. (Note: :any:`primaries` is a synonym for the original +keyword ``masters``, which can still be used, but is no longer the +preferred terminology.) + +To force the zone transfer requests to be sent over TLS, use :any:`tls` keyword, +e.g. ``primaries { 192.0.2.1 tls tls-configuration-name; };``, +where ``tls-configuration-name`` refers to a previously defined +:any:`tls statement <tls>`. + +.. warning:: + + Please note that TLS connections to primaries are **not + authenticated** unless :any:`remote-hostname` or :any:`ca-file` are specified + within the :any:`tls statement <tls>` in use (see information on + :ref:`Strict TLS <strict-tls>` and :ref:`Mutual TLS <mutual-tls>` + for more details). **Not authenticated mode** (:ref:`Opportunistic + TLS <opportunistic-tls>`) provides protection from passive + observers but does not protect from man-in-the-middle attacks on + zone transfers. + +.. warning:: + + Please note that this version of BIND 9 does not support dynamic updates + forwarding (see :any:`allow-update-forwarding`) in conjuction with zone + transfers over TLS (XoT), that is when the :any:`tls` keyword is used with + :any:`primaries`, e.g. ``primaries { 192.0.2.1 tls tls-configuration-name; };``. + +``options`` Block Grammar +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: options + :tags: server + :short: Defines global options to be used by BIND 9. + +This is the grammar of the ``options`` statement in the :iscman:`named.conf` +file: + +``options`` Block Definition and Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The ``options`` statement sets up global options to be used by BIND. +This statement may appear only once in a configuration file. If there is +no ``options`` statement, an options block with each option set to its +default is used. + +.. namedconf:statement:: attach-cache + :tags: view + :short: Allows multiple views to share a single cache database. + + This option allows multiple views to share a single cache database. Each view has + its own cache database by default, but if multiple views have the + same operational policy for name resolution and caching, those views + can share a single cache to save memory, and possibly improve + resolution efficiency, by using this option. + + The :any:`attach-cache` option may also be specified in :any:`view` + statements, in which case it overrides the global :any:`attach-cache` + option. + + The ``cache_name`` specifies the cache to be shared. When the :iscman:`named` + server configures views which are supposed to share a cache, it + creates a cache with the specified name for the first view of these + sharing views. The rest of the views simply refer to the + already-created cache. + + One common configuration to share a cache is to allow all views + to share a single cache. This can be done by specifying + :any:`attach-cache` as a global option with an arbitrary name. + + Another possible operation is to allow a subset of all views to share + a cache while the others retain their own caches. For example, if + there are three views A, B, and C, and only A and B should share a + cache, specify the :any:`attach-cache` option as a view of A (or B)'s + option, referring to the other view name: + + :: + + view "A" { + // this view has its own cache + ... + }; + view "B" { + // this view refers to A's cache + attach-cache "A"; + }; + view "C" { + // this view has its own cache + ... + }; + + Views that share a cache must have the same policy on configurable + parameters that may affect caching. The current implementation + requires the following configurable options be consistent among these + views: :any:`check-names`, :any:`dnssec-accept-expired`, + :any:`dnssec-validation`, :any:`max-cache-ttl`, :any:`max-ncache-ttl`, + :any:`max-stale-ttl`, :any:`max-cache-size`, :any:`min-cache-ttl`, + :any:`min-ncache-ttl`, and :any:`zero-no-soa-ttl`. + + Note that there may be other parameters that may cause confusion if + they are inconsistent for different views that share a single cache. + For example, if these views define different sets of forwarders that + can return different answers for the same question, sharing the + answer does not make sense or could even be harmful. It is the + administrator's responsibility to ensure that configuration differences in + different views do not cause disruption with a shared cache. + +.. namedconf:statement:: directory + :tags: server + :short: Sets the server's working directory. + + This sets the working directory of the server. Any non-absolute pathnames in + the configuration file are taken as relative to this directory. + The default location for most server output files (e.g., + ``named.run``) is this directory. If a directory is not specified, + the working directory defaults to ``"."``, the directory from + which the server was started. The directory specified should be an + absolute path, and *must* be writable by the effective user ID of the + :iscman:`named` process. + + The option takes effect only at the time that the configuration + option is parsed; if other files are being included before or after specifying the + new :any:`directory`, the :any:`directory` option must be listed + before any other directive (like ``include``) that can work with relative + files. The safest way to include files is to use absolute file names. + +.. namedconf:statement:: dnstap + :tags: logging + :short: Enables logging of :any:`dnstap` messages. + + :any:`dnstap` is a fast, flexible method for capturing and logging DNS + traffic. Developed by Robert Edmonds at Farsight Security, Inc., and + supported by multiple DNS implementations, :any:`dnstap` uses + ``libfstrm`` (a lightweight high-speed framing library; see + https://github.com/farsightsec/fstrm) to send event payloads which + are encoded using Protocol Buffers (``libprotobuf-c``, a mechanism + for serializing structured data developed by Google, Inc.; see + https://developers.google.com/protocol-buffers/). + + To enable :any:`dnstap` at compile time, the ``fstrm`` and + ``protobuf-c`` libraries must be available, and BIND must be + configured with ``--enable-dnstap``. + + The :any:`dnstap` option is a bracketed list of message types to be + logged. These may be set differently for each view. Supported types + are ``client``, ``auth``, ``resolver``, ``forwarder``, and + ``update``. Specifying type ``all`` causes all :any:`dnstap` + messages to be logged, regardless of type. + + Each type may take an additional argument to indicate whether to log + ``query`` messages or ``response`` messages; if not specified, both + queries and responses are logged. + + Example: To log all authoritative queries and responses, recursive + client responses, and upstream queries sent by the resolver, use: + + :: + + dnstap { + auth; + client response; + resolver query; + }; + + .. note:: In the default configuration, the dnstap output for + recursive resolver traffic does not include the IP addresses used + by server-side sockets. This is caused by the fact that unless the + :ref:`query source address <query_address>` is explicitly set, + these sockets are bound to wildcard IP addresses and determining + the specific IP address used by each of them requires issuing a + system call (i.e. incurring a performance penalty). + + Logged :any:`dnstap` messages can be parsed using the :iscman:`dnstap-read` + utility (see :ref:`man_dnstap-read` for details). + + For more information on :any:`dnstap`, see http://dnstap.info. + + The fstrm library has a number of tunables that are exposed in + :iscman:`named.conf`, and can be modified if necessary to improve + performance or prevent loss of data. These are: + + .. namedconf:statement:: fstrm-set-buffer-hint + :tags: logging + :short: Sets the number of accumulated bytes in the output buffer before forcing a buffer flush. + + The threshold number of bytes to + accumulate in the output buffer before forcing a buffer flush. The + minimum is 1024, the maximum is 65536, and the default is 8192. + + .. namedconf:statement:: fstrm-set-flush-timeout + :tags: logging + :short: Sets the number of seconds that unflushed data remains in the output buffer. + + The number of seconds to allow + unflushed data to remain in the output buffer. The minimum is 1 + second, the maximum is 600 seconds (10 minutes), and the default + is 1 second. + + .. namedconf:statement:: fstrm-set-output-notify-threshold + :tags: logging + :short: Sets the number of outstanding queue entries allowed on an input queue before waking the I/O thread. + + The number of outstanding + queue entries to allow on an input queue before waking the I/O + thread. The minimum is 1 and the default is 32. + + .. namedconf:statement:: fstrm-set-output-queue-model + :tags: logging + :short: Sets the queuing semantics to use for queue objects. + + The queuing semantics + to use for queue objects. The default is ``mpsc`` (multiple + producer, single consumer); the other option is ``spsc`` (single + producer, single consumer). + + .. namedconf:statement:: fstrm-set-input-queue-size + :tags: logging + :short: Sets the number of queue entries to allocate for each input queue. + + The number of queue entries to + allocate for each input queue. This value must be a power of 2. + The minimum is 2, the maximum is 16384, and the default is 512. + + .. namedconf:statement:: fstrm-set-output-queue-size + :tags: logging + :short: Sets the number of queue entries allocated for each output queue. + + The number of queue entries to + allocate for each output queue. The minimum is 2, the maximum is + system-dependent and based on ``IOV_MAX``, and the default is 64. + + .. namedconf:statement:: fstrm-set-reopen-interval + :tags: logging + :short: Sets the number of seconds to wait between attempts to reopen a closed output stream. + + The number of seconds to wait + between attempts to reopen a closed output stream. The minimum is + 1 second, the maximum is 600 seconds (10 minutes), and the default + is 5 seconds. For convenience, TTL-style time-unit suffixes may be + used to specify the value. + + Note that all of the above minimum, maximum, and default values are + set by the ``libfstrm`` library, and may be subject to change in + future versions of the library. See the ``libfstrm`` documentation + for more information. + +.. namedconf:statement:: dnstap-output + :tags: logging + :short: Configures the path to which the :any:`dnstap` frame stream is sent. + + This configures the path to which the :any:`dnstap` frame stream is sent + if :any:`dnstap` is enabled at compile time and active. + + The first argument is either ``file`` or ``unix``, indicating whether + the destination is a file or a Unix domain socket. The second + argument is the path of the file or socket. (Note: when using a + socket, :any:`dnstap` messages are only sent if another process such + as ``fstrm_capture`` (provided with ``libfstrm``) is listening on the + socket.) + + If the first argument is ``file``, then up to three additional + options can be added: ``size`` indicates the size to which a + :any:`dnstap` log file can grow before being rolled to a new file; + ``versions`` specifies the number of rolled log files to retain; and + ``suffix`` indicates whether to retain rolled log files with an + incrementing counter as the suffix (``increment``) or with the + current timestamp (``timestamp``). These are similar to the ``size``, + ``versions``, and ``suffix`` options in a :any:`logging` channel. The + default is to allow :any:`dnstap` log files to grow to any size without + rolling. + + :any:`dnstap-output` can only be set globally in :namedconf:ref:`options`. Currently, + it can only be set once while :iscman:`named` is running; once set, it + cannot be changed by :option:`rndc reload` or :option:`rndc reconfig`. + +.. namedconf:statement:: dnstap-identity + :tags: logging + :short: Specifies an ``identity`` string to send in :any:`dnstap` messages. + + This specifies an ``identity`` string to send in :any:`dnstap` messages. If + set to :any:`hostname`, which is the default, the server's hostname + is sent. If set to ``none``, no identity string is sent. + +.. namedconf:statement:: dnstap-version + :tags: logging + :short: Specifies a :any:`version` string to send in :any:`dnstap` messages. + + This specifies a :any:`version` string to send in :any:`dnstap` messages. The + default is the version number of the BIND release. If set to + ``none``, no version string is sent. + +.. namedconf:statement:: geoip-directory + :tags: server + :short: Specifies the directory containing GeoIP database files. + + When :iscman:`named` is compiled using the MaxMind GeoIP2 geolocation API, this + specifies the directory containing GeoIP database files. By default, the + option is set based on the prefix used to build the ``libmaxminddb`` module; + for example, if the library is installed in ``/usr/local/lib``, then the + default :any:`geoip-directory` is ``/usr/local/share/GeoIP``. See :any:`acl` + for details about ``geoip`` ACLs. + +.. namedconf:statement:: key-directory + :tags: dnssec + :short: Indicates the directory where public and private DNSSEC key files are found. + + This is the directory where the public and private DNSSEC key files should be + found when performing a dynamic update of secure zones, if different + than the current working directory. (Note that this option has no + effect on the paths for files containing non-DNSSEC keys such as + ``bind.keys``, ``rndc.key``, or ``session.key``.) + +.. namedconf:statement:: lmdb-mapsize + :tags: server + :short: Sets a maximum size for the memory map of the new-zone database in LMDB database format. + + When :iscman:`named` is built with liblmdb, this option sets a maximum size + for the memory map of the new-zone database (NZD) in LMDB database + format. This database is used to store configuration information for + zones added using :option:`rndc addzone`. Note that this is not the NZD + database file size, but the largest size that the database may grow + to. + + Because the database file is memory-mapped, its size is limited by + the address space of the :iscman:`named` process. The default of 32 megabytes + was chosen to be usable with 32-bit :iscman:`named` builds. The largest + permitted value is 1 terabyte. Given typical zone configurations + without elaborate ACLs, a 32 MB NZD file ought to be able to hold + configurations of about 100,000 zones. + +.. namedconf:statement:: managed-keys-directory + :tags: dnssec + :short: Specifies the directory in which to store the files that track managed DNSSEC keys. + + This specifies the directory in which to store the files that track managed DNSSEC + keys (i.e., those configured using the ``initial-key`` or ``initial-ds`` + keywords in a :any:`trust-anchors` statement). By default, this is the working + directory. The directory *must* be writable by the effective user ID of the + :iscman:`named` process. + + If :iscman:`named` is not configured to use views, managed keys for + the server are tracked in a single file called + ``managed-keys.bind``. Otherwise, managed keys are tracked in + separate files, one file per view; each file name is the view + name (or, if it contains characters that are incompatible with use as + a file name, the SHA256 hash of the view name), followed by the + extension ``.mkeys``. + + (Note: in earlier releases, file names for views always used the + SHA256 hash of the view name. To ensure compatibility after upgrading, + if a file using the old name format is found to exist, it is + used instead of the new format.) + +.. namedconf:statement:: max-ixfr-ratio + :tags: transfer + :short: Sets the maximum size for IXFR responses to zone transfer requests. + + This sets the size threshold (expressed as a percentage of the size + of the full zone) beyond which :iscman:`named` chooses to use an AXFR + response rather than IXFR when answering zone transfer requests. See + :ref:`incremental_zone_transfers`. + + The minimum value is ``1%``. The keyword ``unlimited`` disables ratio + checking and allows IXFRs of any size. The default is ``100%``. + +.. namedconf:statement:: new-zones-directory + :tags: zone + :short: Specifies the directory where configuration parameters are stored for zones added by :option:`rndc addzone`. + + This specifies the directory in which to store the configuration + parameters for zones added via :option:`rndc addzone`. By default, this is + the working directory. If set to a relative path, it is relative + to the working directory. The directory *must* be writable by the + effective user ID of the :iscman:`named` process. + +.. namedconf:statement:: qname-minimization + :tags: query + :short: Controls QNAME minimization behavior in the BIND 9 resolver. + + When this is set to ``strict``, BIND follows the QNAME minimization + algorithm to the letter, as specified in :rfc:`7816`. + + Setting this option to ``relaxed`` causes BIND to fall back to + normal (non-minimized) query mode when it receives either NXDOMAIN + or other unexpected responses (e.g., SERVFAIL, improper zone + cut, REFUSED) to a minimized query. + + In ``relaxed`` mode ``named`` makes NS queries for ``<domain>`` as it + walks down the tree. + + ``disabled`` disables QNAME minimization completely. + ``off`` is a synonym for ``disabled``. + + The current default is ``relaxed``, but it may be changed to + ``strict`` in a future release. + +.. namedconf:statement:: tkey-gssapi-keytab + :tags: security + :short: Sets the KRB5 keytab file to use for GSS-TSIG updates. + + This is the KRB5 keytab file to use for GSS-TSIG updates. If this option is + set and ``tkey-gssapi-credential`` is not set, updates are + allowed with any key matching a principal in the specified keytab. + +.. namedconf:statement:: tkey-gssapi-credential + :tags: security + :short: Sets the security credential for authentication keys requested by the GSS-TSIG protocol. + + This is the security credential with which the server should authenticate + keys requested by the GSS-TSIG protocol. Currently only Kerberos 5 + authentication is available; the credential is a Kerberos + principal which the server can acquire through the default system key + file, normally ``/etc/krb5.keytab``. The location of the keytab file can be + overridden using the :any:`tkey-gssapi-keytab` option. Normally this + principal is of the form ``DNS/server.domain``. To use + GSS-TSIG, :any:`tkey-domain` must also be set if a specific keytab is + not set with :any:`tkey-gssapi-keytab`. + +.. namedconf:statement:: tkey-domain + :tags: security + :short: Sets the domain appended to the names of all shared keys generated with ``TKEY``. + + This domain is appended to the names of all shared keys generated with + ``TKEY``. When a client requests a ``TKEY`` exchange, it may or may + not specify the desired name for the key. If present, the name of the + shared key is ``client-specified part`` + :any:`tkey-domain`. + Otherwise, the name of the shared key is ``random hex digits`` + + :any:`tkey-domain`. In most cases, the ``domainname`` + should be the server's domain name, or an otherwise nonexistent + subdomain like ``_tkey.domainname``. If using GSS-TSIG, + this variable must be defined, unless a specific keytab + is specified using :any:`tkey-gssapi-keytab`. + +.. namedconf:statement:: tkey-dhkey + :tags: deprecated + :short: Sets the Diffie-Hellman key used by the server to generate shared keys. + + This is the Diffie-Hellman key used by the server to generate shared keys + with clients using the Diffie-Hellman mode of ``TKEY``. The server + must be able to load the public and private keys from files in the + working directory. In most cases, the ``key_name`` should be the + server's host name. + + This option is deprecated, and will be rendered non-operational in a + future release. + +.. namedconf:statement:: dump-file + :tags: logging + :short: Indicates the pathname of the file where the server dumps the database after :option:`rndc dumpdb`. + + This is the pathname of the file the server dumps the database to, when + instructed to do so with :option:`rndc dumpdb`. If not specified, the + default is ``named_dump.db``. + +.. namedconf:statement:: memstatistics-file + :tags: logging + :short: Sets the pathname of the file where the server writes memory usage statistics on exit. + + This is the pathname of the file the server writes memory usage statistics to + on exit. If not specified, the default is ``named.memstats``. + +.. namedconf:statement:: lock-file + :tags: server + :short: Sets the pathname of the file on which :iscman:`named` attempts to acquire a file lock when starting for the first time. + + This is the pathname of a file on which :iscman:`named` attempts to acquire a + file lock when starting for the first time; if unsuccessful, the + server terminates, under the assumption that another server + is already running. If not specified, the default is + ``none``. + + Specifying ``lock-file none`` disables the use of a lock file. + :any:`lock-file` is ignored if :iscman:`named` was run using the :option:`-X <named -X>` + option, which overrides it. Changes to :any:`lock-file` are ignored if + :iscman:`named` is being reloaded or reconfigured; it is only effective + when the server is first started. + +.. namedconf:statement:: pid-file + :tags: server + :short: Specifies the pathname of the file where the server writes its process ID. + + This is the pathname of the file the server writes its process ID in. If not + specified, the default is |named_pid|. The PID file + is used by programs that send signals to the running name + server. Specifying ``pid-file none`` disables the use of a PID file; + no file is written and any existing one is removed. Note + that ``none`` is a keyword, not a filename, and therefore is not + enclosed in double quotes. + +.. namedconf:statement:: recursing-file + :tags: server + :short: Specifies the pathname of the file where the server dumps queries that are currently recursing via :option:`rndc recursing`. + + This is the pathname of the file where the server dumps the queries that are + currently recursing, when instructed to do so with :option:`rndc recursing`. + If not specified, the default is ``named.recursing``. + +.. namedconf:statement:: statistics-file + :tags: logging, server + :short: Specifies the pathname of the file where the server appends statistics, when using :option:`rndc stats`. + + This is the pathname of the file the server appends statistics to, when + instructed to do so using :option:`rndc stats`. If not specified, the + default is ``named.stats`` in the server's current directory. The + format of the file is described in :ref:`statsfile`. + +.. namedconf:statement:: bindkeys-file + :tags: dnssec + :short: Specifies the pathname of a file to override the built-in trusted keys provided by :iscman:`named`. + + This is the pathname of a file to override the built-in trusted keys provided + by :iscman:`named`. See the discussion of :any:`dnssec-validation` for + details. If not specified, the default is |bind_keys|. + +.. namedconf:statement:: secroots-file + :tags: dnssec + :short: Specifies the pathname of the file where the server dumps security roots, when using :option:`rndc secroots`. + + This is the pathname of the file the server dumps security roots to, when + instructed to do so with :option:`rndc secroots`. If not specified, the + default is ``named.secroots``. + +.. namedconf:statement:: session-keyfile + :tags: security + :short: Specifies the pathname of the file where a TSIG session key is written, when generated by :iscman:`named` for use by ``nsupdate -l``. + + This is the pathname of the file into which to write a TSIG session key + generated by :iscman:`named` for use by ``nsupdate -l``. If not specified, + the default is |session_key|. (See :ref:`dynamic_update_policies`, + and in particular the discussion of the :any:`update-policy` statement's + ``local`` option, for more information about this feature.) + +.. namedconf:statement:: session-keyname + :tags: security + :short: Specifies the key name for the TSIG session key. + + This is the key name to use for the TSIG session key. If not specified, the + default is ``local-ddns``. + +.. namedconf:statement:: session-keyalg + :tags: security + :short: Specifies the algorithm to use for the TSIG session key. + + This is the algorithm to use for the TSIG session key. Valid values are + hmac-sha1, hmac-sha224, hmac-sha256, hmac-sha384, hmac-sha512, and + hmac-md5. If not specified, the default is hmac-sha256. + +.. namedconf:statement:: port + :tags: server, query + :short: Specifies the UDP/TCP port number the server uses to receive and send DNS protocol traffic. + + This is the UDP/TCP port number the server uses to receive and send DNS + protocol traffic. The default is 53. This option is mainly intended + for server testing; a server using a port other than 53 is not + able to communicate with the global DNS. + +.. namedconf:statement:: tls-port + :tags: server, query + :short: Specifies the TCP port number the server uses to receive and send DNS-over-TLS protocol traffic. + + This is the TCP port number the server uses to receive and send + DNS-over-TLS protocol traffic. The default is 853. + +.. namedconf:statement:: https-port + :tags: server, query + :short: Specifies the TCP port number the server uses to receive and send DNS-over-HTTPS protocol traffic. + + This is the TCP port number the server uses to receive and send + DNS-over-HTTPS protocol traffic. The default is 443. + +.. namedconf:statement:: http-port + :tags: server, query + :short: Specifies the TCP port number the server uses to receive and send unencrypted DNS traffic via HTTP. + + This is the TCP port number the server uses to receive and send + unencrypted DNS traffic via HTTP (a configuration that may be useful + when encryption is handled by third-party software or by a reverse + proxy). + +.. namedconf:statement:: http-listener-clients + :tags: server + :short: Limits the number of active concurrent connections on a per-listener basis. + + This sets a hard limit on the number of active concurrent connections + on a per-listener basis. The default value is 300; setting it to 0 + removes the quota. + +.. namedconf:statement:: http-streams-per-connection + :tags: server + :short: Limits the number of active concurrent HTTP/2 streams on a per-connection basis. + + This sets a hard limit on the number of active concurrent HTTP/2 + streams on a per-connection basis. The default value is 100; + setting it to 0 removes the limit. Once the limit is exceeded, the + server finishes the HTTP session. + +.. namedconf:statement:: dscp + :tags: server, query + :short: Sets the Differentiated Services Code Point (DSCP) value (obsolete). + + This option used to set the global Differentiated Services Code Point + (DSCP) value to classify outgoing DNS traffic. It is now obsolete and + has no effect. + +.. namedconf:statement:: preferred-glue + :tags: query + :short: Controls the order of glue records in an A or AAAA response. + + If specified, the listed type (A or AAAA) is emitted before + other glue in the additional section of a query response. The default + is to prefer A records when responding to queries that arrived via + IPv4 and AAAA when responding to queries that arrived via IPv6. + +.. namedconf:statement:: root-delegation-only + :tags: deprecated + :short: Turns on enforcement of delegation-only in top-level domains (TLDs) and root zones with an optional exclude list. + + This turns on enforcement of delegation-only in top-level domains (TLDs) + and root zones with an + optional exclude list. + + DS queries are expected to be made to and be answered by delegation-only + zones. Such queries and responses are treated as an exception to + delegation-only processing and are not converted to NXDOMAIN + responses, provided a CNAME is not discovered at the query name. + + If a delegation-only zone server also serves a child zone, it is not + always possible to determine whether an answer comes from the + delegation-only zone or the child zone. SOA NS and DNSKEY records are + apex-only records and a matching response that contains these records + or DS is treated as coming from a child zone. RRSIG records are also + examined to see whether they are signed by a child zone, and the + authority section is examined to see if there is evidence that + the answer is from the child zone. Answers that are determined to be + from a child zone are not converted to NXDOMAIN responses. Despite + all these checks, there is still a possibility of false negatives when + a child zone is being served. + + Similarly, false positives can arise from empty nodes (no records at + the name) in the delegation-only zone when the query type is not ``ANY``. + + Note that some TLDs are not delegation-only; e.g., "DE", "LV", "US", and + "MUSEUM". This list is not exhaustive. + + :: + + options { + root-delegation-only exclude { "de"; "lv"; "us"; "museum"; }; + }; + + This option is deprecated, and will be rendered non-operational in a + future release. + +.. namedconf:statement:: disable-algorithms + :tags: dnssec + :short: Disables DNSSEC algorithms from a specified zone. + + This disables the specified DNSSEC algorithms at and below the specified + name. Multiple :any:`disable-algorithms` statements are allowed. Only + the best-match :any:`disable-algorithms` clause is used to + determine the algorithms. + + If all supported algorithms are disabled, the zones covered by the + :any:`disable-algorithms` setting are treated as insecure. + + Configured trust anchors in :any:`trust-anchors` (or :any:`managed-keys` or + :any:`trusted-keys`) that match a disabled algorithm are ignored and treated + as if they were not configured. + +.. namedconf:statement:: disable-ds-digests + :tags: dnssec, zone + :short: Disables DS digest types from a specified zone. + + This disables the specified DS digest types at and below the specified + name. Multiple :any:`disable-ds-digests` statements are allowed. Only + the best-match :any:`disable-ds-digests` clause is used to + determine the digest types. + + If all supported digest types are disabled, the zones covered by + :any:`disable-ds-digests` are treated as insecure. + +.. namedconf:statement:: dnssec-must-be-secure + :tags: deprecated + :short: Defines hierarchies that must or may not be secure (signed and validated). + + This option is deprecated and will be removed in a future release. + + This specifies hierarchies which must be or may not be secure (signed and + validated). If ``yes``, then :iscman:`named` only accepts answers if + they are secure. If ``no``, then normal DNSSEC validation applies, + allowing insecure answers to be accepted. The specified domain + must be defined as a trust anchor, for instance in a :any:`trust-anchors` + statement, or ``dnssec-validation auto`` must be active. + +.. namedconf:statement:: dns64 + :tags: query + :short: Instructs :iscman:`named` to return mapped IPv4 addresses to AAAA queries when there are no AAAA records. + + This directive instructs :iscman:`named` to return mapped IPv4 addresses to + AAAA queries when there are no AAAA records. It is intended to be + used in conjunction with a NAT64. Each :any:`dns64` defines one DNS64 + prefix. Multiple DNS64 prefixes can be defined. + + Compatible IPv6 prefixes have lengths of 32, 40, 48, 56, 64, and 96, per + :rfc:`6052`. Bits 64..71 inclusive must be zero, with the most significant bit + of the prefix in position 0. + + In addition, a reverse IP6.ARPA zone is created for the prefix + to provide a mapping from the IP6.ARPA names to the corresponding + IN-ADDR.ARPA names using synthesized CNAMEs. + + .. namedconf:statement:: dns64-server + :tags: server + :short: Specifies the name of the server for :any:`dns64` zones. + + .. namedconf:statement:: dns64-contact + :tags: server + :short: Specifies the name of the contact for :any:`dns64` zones. + + :any:`dns64-server` and + :any:`dns64-contact` can be used to specify the name of the server and + contact for the zones. These can be set at the view/options + level but not on a per-prefix basis. + + :any:`dns64` will also cause IPV4ONLY.ARPA to be created if not + explicitly disabled using :any:`ipv4only-enable`. + + .. namedconf:statement:: clients + :tags: query + :short: Specifies an access control list (ACL) of clients that are affected by a given :any:`dns64` directive. + + Each :any:`dns64` supports an optional :any:`clients` ACL that determines + which clients are affected by this directive. If not defined, it + defaults to ``any;``. + + .. namedconf:statement:: mapped + :tags: query + :short: Specifies an access control list (ACL) of IPv4 addresses that are to be mapped to the corresponding A RRset in :any:`dns64`. + + Each :any:`dns64` block supports an optional :any:`mapped` ACL that selects which + IPv4 addresses are to be mapped in the corresponding A RRset. If not + defined, it defaults to ``any;``. + + .. namedconf:statement:: exclude + :tags: query + :short: Allows a list of IPv6 addresses to be ignored if they appear in a domain name's AAAA records in :any:`dns64`. + + Normally, DNS64 does not apply to a domain name that owns one or more + AAAA records; these records are simply returned. The optional + :any:`exclude` ACL allows specification of a list of IPv6 addresses that + are ignored if they appear in a domain name's AAAA records; + DNS64 is applied to any A records the domain name owns. If not + defined, :any:`exclude` defaults to ::ffff:0.0.0.0/96. + + .. namedconf:statement:: suffix + :tags: query + :short: Defines trailing bits for mapped IPv4 address bits in :any:`dns64`. + + An optional :any:`suffix` can also be defined to set the bits trailing + the mapped IPv4 address bits. By default these bits are set to + ``::``. The bits matching the prefix and mapped IPv4 address must be + zero. + + .. namedconf:statement:: recursive-only + :tags: query + :short: Toggles whether :any:`dns64` synthesis occurs only for recursive queries. + + If :any:`recursive-only` is set to ``yes``, the DNS64 synthesis only + happens for recursive queries. The default is ``no``. + + .. namedconf:statement:: break-dnssec + :tags: query + :short: Enables :any:`dns64` synthesis even if the validated result would cause a DNSSEC validation failure. + + If :any:`break-dnssec` is set to ``yes``, the DNS64 synthesis happens + even if the result, if validated, would cause a DNSSEC validation + failure. If this option is set to ``no`` (the default), the DO is set + on the incoming query, and there are RRSIGs on the applicable + records, then synthesis does not happen. + + :: + + acl rfc1918 { 10/8; 192.168/16; 172.16/12; }; + + dns64 64:FF9B::/96 { + clients { any; }; + mapped { !rfc1918; any; }; + exclude { 64:FF9B::/96; ::ffff:0000:0000/96; }; + suffix ::; + }; + +.. namedconf:statement:: ipv4only-enable + :tags: query + :short: Enables automatic IPv4 zones if a :any:`dns64` block is configured. + + This enables or disables automatic zones ``ipv4only.arpa``, + ``170.0.0.192.in-addr.arpa``, and ``171.0.0.192.in-addr.arpa``. + + By default these zones are loaded if :any:`dns64` is configured. + +.. namedconf:statement:: ipv4only-server + :tags: server, query + :short: Specifies the name of the server for the IPV4ONLY.ARPA zone created by :any:`dns64`. + +.. namedconf:statement:: ipv4only-contact + :tags: server + :short: Specifies the contact for the IPV4ONLY.ARPA zone created by :any:`dns64`. + + :any:`ipv4only-server` and :any:`ipv4only-contact` can be used to specify the name + of the server and contact for the IPV4ONLY.ARPA zone created by + :any:`dns64`. + +.. namedconf:statement:: dnssec-loadkeys-interval + :tags: dnssec + :short: Sets the frequency of automatic checks of the DNSSEC key repository. + + When a zone is configured with ``auto-dnssec maintain;``, its key + repository must be checked periodically to see if any new keys have + been added or any existing keys' timing metadata has been updated + (see :ref:`man_dnssec-keygen` and :ref:`man_dnssec-settime`). + The :any:`dnssec-loadkeys-interval` option + sets the frequency of automatic repository checks, in minutes. The + default is ``60`` (1 hour), the minimum is ``1`` (1 minute), and + the maximum is ``1440`` (24 hours); any higher value is silently + reduced. + +:namedconf:ref:`dnssec-policy` + + This specifies which key and signing policy (KASP) should be used for this + zone. This is a string referring to a :namedconf:ref:`dnssec-policy` block. + The default is ``none``. + +.. namedconf:statement:: dnssec-update-mode + :tags: dnssec + :short: Controls the scheduled maintenance of DNSSEC signatures. + + If this option is set to its default value of ``maintain`` in a zone + of :any:`type primary` which is DNSSEC-signed and configured to allow + dynamic updates (see :ref:`dynamic_update_policies`), and if :iscman:`named` has access + to the private signing key(s) for the zone, then :iscman:`named` + automatically signs all new or changed records and maintains signatures + for the zone by regenerating RRSIG records whenever they approach + their expiration date. + + If the option is changed to ``no-resign``, then :iscman:`named` signs + all new or changed records, but scheduled maintenance of signatures + is disabled. + + With either of these settings, :iscman:`named` rejects updates to a + DNSSEC-signed zone when the signing keys are inactive or unavailable + to :iscman:`named`. (A planned third option, ``external``, will disable all + automatic signing and allow DNSSEC data to be submitted into a zone + via dynamic update; this is not yet implemented.) + +.. namedconf:statement:: nta-lifetime + :tags: dnssec + :short: Specifies the lifetime, in seconds, for negative trust anchors added via :option:`rndc nta`. + + This specifies the default lifetime, in seconds, for + negative trust anchors added via :option:`rndc nta`. + + A negative trust anchor selectively disables DNSSEC validation for + zones that are known to be failing because of misconfiguration, rather + than an attack. When data to be validated is at or below an active + NTA (and above any other configured trust anchors), :iscman:`named` + aborts the DNSSEC validation process and treats the data as insecure + rather than bogus. This continues until the NTA's lifetime has + elapsed. NTAs persist across :iscman:`named` restarts. + + For convenience, TTL-style time-unit suffixes can be used to specify the NTA + lifetime in seconds, minutes, or hours. It also accepts ISO 8601 duration + formats. + + :any:`nta-lifetime` defaults to one hour; it cannot exceed one week. + +.. namedconf:statement:: nta-recheck + :tags: dnssec + :short: Specifies the time interval for checking whether negative trust anchors added via :option:`rndc nta` are still necessary. + + This specifies how often to check whether negative trust anchors added via + :option:`rndc nta` are still necessary. + + A negative trust anchor is normally used when a domain has stopped + validating due to operator error; it temporarily disables DNSSEC + validation for that domain. In the interest of ensuring that DNSSEC + validation is turned back on as soon as possible, :iscman:`named` + periodically sends a query to the domain, ignoring negative trust + anchors, to find out whether it can now be validated. If so, the + negative trust anchor is allowed to expire early. + + Validity checks can be disabled for an individual NTA by using + :option:`rndc nta -f <rndc nta>`, or for all NTAs by setting :any:`nta-recheck` to zero. + + For convenience, TTL-style time-unit suffixes can be used to specify the NTA + recheck interval in seconds, minutes, or hours. It also accepts ISO 8601 + duration formats. + + The default is five minutes. It cannot be longer than :any:`nta-lifetime`, which + cannot be longer than a week. + +:any:`max-zone-ttl` + :tags: deprecated + :short: Specifies a maximum permissible time-to-live (TTL) value, in seconds. + + This should now be configured as part of :namedconf:ref:`dnssec-policy`. + Use of this option in :namedconf:ref:`options`, :namedconf:ref:`view` + and :namedconf:ref:`zone` blocks has no effect on any zone for which + a :namedconf:ref:`dnssec-policy` has also been configured. + + :any:`max-zone-ttl` specifies a maximum permissible TTL value in seconds. + For convenience, TTL-style time-unit suffixes may be used to specify the + maximum value. When a zone file is loaded, any record encountered with a + TTL higher than :any:`max-zone-ttl` causes the zone to be rejected. + + This is needed in DNSSEC-maintained zones because when rolling to a new + DNSKEY, the old key needs to remain available until RRSIG records + have expired from caches. The :any:`max-zone-ttl` option guarantees that + the largest TTL in the zone is no higher than the set value. + + When used in :namedconf:ref:`options`, :namedconf:ref:`view` and + :namedconf:ref:`zone` blocks, setting :any:`max-zone-ttl` to zero + is equivalent to "unlimited". + +.. namedconf:statement:: stale-answer-ttl + :tags: query + :short: Specifies the time to live (TTL) to be returned on stale answers, in seconds. + + This specifies the TTL to be returned on stale answers. The default is 30 + seconds. The minimum allowed is 1 second; a value of 0 is updated silently + to 1 second. + + For stale answers to be returned, they must be enabled, either in the + configuration file using :any:`stale-answer-enable` or via + :option:`rndc serve-stale on <rndc serve-stale>`. + +.. namedconf:statement:: serial-update-method + :tags: zone + :short: Specifies the update method to be used for the zone serial number in the SOA record. + + Zones configured for dynamic DNS may use this option to set the + update method to be used for the zone serial number in the SOA + record. + + With the default setting of ``serial-update-method increment;``, the + SOA serial number is incremented by one each time the zone is + updated. + + When set to ``serial-update-method unixtime;``, the SOA serial number + is set to the number of seconds since the Unix epoch, unless the + serial number is already greater than or equal to that value, in + which case it is simply incremented by one. + + When set to ``serial-update-method date;``, the new SOA serial number + is the current date in the form "YYYYMMDD", followed by two + zeroes, unless the existing serial number is already greater than or + equal to that value, in which case it is incremented by one. + +.. namedconf:statement:: zone-statistics + :tags: zone, logging + :short: Controls the level of statistics gathered for all zones. + + If ``full``, the server collects statistical data on all zones, + unless specifically turned off on a per-zone basis by specifying + ``zone-statistics terse`` or ``zone-statistics none`` in the :any:`zone` + statement. The statistical data includes, for example, DNSSEC signing + operations and the number of authoritative answers per query type. The + default is ``terse``, providing minimal statistics on zones + (including name and current serial number, but not query type + counters). + + These statistics may be accessed via the ``statistics-channel`` or + using :option:`rndc stats`, which dumps them to the file listed in the + :any:`statistics-file`. See also :ref:`statsfile`. + + For backward compatibility with earlier versions of BIND 9, the + :any:`zone-statistics` option can also accept ``yes`` or ``no``; ``yes`` + has the same meaning as ``full``. As of BIND 9.10, ``no`` has the + same meaning as ``none``; previously, it was the same as ``terse``. + +.. _boolean_options: + +Boolean Options +^^^^^^^^^^^^^^^ + +.. namedconf:statement:: automatic-interface-scan + :tags: server + :short: Controls the automatic rescanning of network interfaces when addresses are added or removed. + + If ``yes`` and supported by the operating system, this automatically rescans + network interfaces when the interface addresses are added or removed. The + default is ``yes``. This configuration option does not affect the time-based + :any:`interface-interval` option; it is recommended to set the time-based + :any:`interface-interval` to 0 when the operator confirms that automatic + interface scanning is supported by the operating system. + + The :any:`automatic-interface-scan` implementation uses routing sockets for the + network interface discovery; therefore, the operating system must + support the routing sockets for this feature to work. + +.. namedconf:statement:: allow-new-zones + :tags: server, zone + :short: Controls the ability to add zones at runtime via :option:`rndc addzone`. + + If ``yes``, then zones can be added at runtime via :option:`rndc addzone`. + The default is ``no``. + + Newly added zones' configuration parameters are stored so that they + can persist after the server is restarted. The configuration + information is saved in a file called ``viewname.nzf`` (or, if + :iscman:`named` is compiled with liblmdb, in an LMDB database file called + ``viewname.nzd``). "viewname" is the name of the view, unless the view + name contains characters that are incompatible with use as a file + name, in which case a cryptographic hash of the view name is used + instead. + + Configurations for zones added at runtime are stored either in + a new-zone file (NZF) or a new-zone database (NZD), depending on + whether :iscman:`named` was linked with liblmdb at compile time. See + :ref:`man_rndc` for further details about :option:`rndc addzone`. + +.. namedconf:statement:: auth-nxdomain + :tags: query + :short: Controls whether BIND, acting as a resolver, provides authoritative NXDOMAIN (domain does not exist) answers. + + If ``yes``, then the ``AA`` bit is always set on NXDOMAIN responses, + even if the server is not actually authoritative. The default is + ``no``. + +.. namedconf:statement:: memstatistics + :tags: server, logging + :short: Controls whether memory statistics are written to the file specified by :any:`memstatistics-file` at exit. + + This writes memory statistics to the file specified by + :any:`memstatistics-file` at exit. The default is ``no`` unless :option:`-m + record <named -m>` is specified on the command line, in which case it is ``yes``. + +.. namedconf:statement:: dialup + :tags: deprecated + :short: Concentrates zone maintenance so that all transfers take place once every :any:`heartbeat-interval`, ideally during a single call. + + This option is deprecated and will be removed in a future release. + + If ``yes``, then the server treats all zones as if they are doing + zone transfers across a dial-on-demand dialup link, which can be + brought up by traffic originating from this server. Although this setting has + different effects according to zone type, it concentrates the zone + maintenance so that everything happens quickly, once every + :any:`heartbeat-interval`, ideally during a single call. It also + suppresses some normal zone maintenance traffic. The default + is ``no``. + + If specified in the :any:`view` and + :any:`zone` statements, the :any:`dialup` option overrides the global :any:`dialup` + option. + + If the zone is a primary zone, the server sends out a NOTIFY + request to all the secondaries (default). This should trigger the zone + serial number check in the secondary (providing it supports NOTIFY), + allowing the secondary to verify the zone while the connection is active. + The set of servers to which NOTIFY is sent can be controlled by + :namedconf:ref:`notify` and :any:`also-notify`. + + If the zone is a secondary or stub zone, the server suppresses + the regular "zone up to date" (refresh) queries and only performs them + when the :any:`heartbeat-interval` expires, in addition to sending NOTIFY + requests. + + Finer control can be achieved by using :namedconf:ref:`notify`, which only sends + NOTIFY messages; ``notify-passive``, which sends NOTIFY messages and + suppresses the normal refresh queries; ``refresh``, which suppresses + normal refresh processing and sends refresh queries when the + :any:`heartbeat-interval` expires; and ``passive``, which disables + normal refresh processing. + + +--------------------+-----------------+-----------------+-----------------+ + | dialup mode | normal refresh | heart-beat | heart-beat | + | | | refresh | notify | + +--------------------+-----------------+-----------------+-----------------+ + | ``no`` | yes | no | no | + | (default) | | | | + +--------------------+-----------------+-----------------+-----------------+ + | ``yes`` | no | yes | yes | + +--------------------+-----------------+-----------------+-----------------+ + | ``notify`` | yes | no | yes | + +--------------------+-----------------+-----------------+-----------------+ + | ``refresh`` | no | yes | no | + +--------------------+-----------------+-----------------+-----------------+ + | ``passive`` | no | no | no | + +--------------------+-----------------+-----------------+-----------------+ + | ``notify-passive`` | no | no | yes | + +--------------------+-----------------+-----------------+-----------------+ + + Note that normal NOTIFY processing is not affected by :any:`dialup`. + +.. namedconf:statement:: flush-zones-on-shutdown + :tags: zone + :short: Controls whether pending zone writes are flushed when the name server exits. + + When the name server exits upon receiving SIGTERM, flush or do not + flush any pending zone writes. The default is + ``flush-zones-on-shutdown no``. + +.. namedconf:statement:: root-key-sentinel + :tags: server + :short: Controls whether BIND 9 responds to root key sentinel probes. + + If ``yes``, respond to root key sentinel probes as described in + `draft-ietf-dnsop-kskroll-sentinel-08 <https://datatracker.ietf.org/doc/html/draft-ietf-dnsop-kskroll-sentinel-08>`_. The default is ``yes``. + +.. namedconf:statement:: reuseport + :tags: server + :short: Enables kernel load-balancing of sockets. + + This option enables kernel load-balancing of sockets on systems which support + it, including Linux (SO_REUSEPORT) and FreeBSD (SO_REUSEPORT_LB). This + instructs the kernel to distribute incoming socket connections among the + networking threads based on a hashing scheme. For more information, see the + receive network flow classification options (``rx-flow-hash``) section in the + ``ethtool`` manual page. The default is ``yes``. + + Enabling :any:`reuseport` significantly increases general throughput when + incoming traffic is distributed uniformly onto the threads by the + operating system. However, in cases where a worker thread is busy with a + long-lasting operation, such as processing a Response Policy Zone (RPZ) or + Catalog Zone update or an unusually large zone transfer, incoming traffic + that hashes onto that thread may be delayed. On servers where these events + occur frequently, it may be preferable to disable socket load-balancing so + that other threads can pick up the traffic that would have been sent to the + busy thread. + + Note: this option can only be set when ``named`` first starts. + Changes will not take effect during reconfiguration; the server + must be restarted. + +.. namedconf:statement:: message-compression + :tags: query + :short: Controls whether DNS name compression is used in responses to regular queries. + + If ``yes``, DNS name compression is used in responses to regular + queries (not including AXFR or IXFR, which always use compression). + Setting this option to ``no`` reduces CPU usage on servers and may + improve throughput. However, it increases response size, which may + cause more queries to be processed using TCP; a server with + compression disabled is out of compliance with :rfc:`1123` Section + 6.1.3.2. The default is ``yes``. + +.. namedconf:statement:: minimal-responses + :tags: query + :short: Controls whether the server only adds records to the authority and additional data sections when they are required (e.g. delegations, negative responses). This improves server performance. + + This option controls the addition of records to the authority and + additional sections of responses. Such records may be included in + responses to be helpful to clients; for example, MX records may + have associated address records included in the additional section, + obviating the need for a separate address lookup. However, adding + these records to responses is not mandatory and requires additional + database lookups, causing extra latency when marshalling responses. + + Responses to DNSKEY, DS, CDNSKEY, and CDS requests will never have + optional additional records added. Responses to NS requests will + always have additional section processing. + + :any:`minimal-responses` takes one of four values: + + - ``no``: the server is as complete as possible when generating + responses. + - ``yes``: the server only adds records to the authority and additional + sections when such records are required by the DNS protocol (for + example, when returning delegations or negative responses). This + provides the best server performance but may result in more client + queries. + - ``no-auth``: the server omits records from the authority section except + when they are required, but it may still add records to the + additional section. + - ``no-auth-recursive``: the same as ``no-auth`` when recursion is requested + in the query (RD=1), or the same as ``no`` if recursion is not requested. + + ``no-auth`` and ``no-auth-recursive`` are useful when answering stub + clients, which usually ignore the authority section. + ``no-auth-recursive`` is meant for use in mixed-mode servers that + handle both authoritative and recursive queries. + + The default is ``no-auth-recursive``. + +.. namedconf:statement:: glue-cache + :tags: deprecated + :short: Deprecated. + + When set to ``yes``, a cache is used to improve query performance + when adding address-type (A and AAAA) glue records to the additional + section of DNS response messages that delegate to a child zone. + + The glue cache uses memory proportional to the number of delegations + in the zone. The default setting is ``yes``, which improves + performance at the cost of increased memory usage for the zone. To avoid + this, set it to ``no``. + + .. note:: This option is deprecated and its use is discouraged. The + glue cache will be permanently *enabled* in a future release. + +.. namedconf:statement:: minimal-any + :tags: query + :short: Controls whether the server replies with only one of the RRsets for a query name, when generating a positive response to a query of type ANY over UDP. + + If set to ``yes``, the server replies with only one of + the RRsets for the query name, and its covering RRSIGs if any, + when generating a positive response to a query of type ANY over UDP, + instead of replying with all known RRsets for the name. Similarly, a + query for type RRSIG is answered with the RRSIG records covering + only one type. This can reduce the impact of some kinds of attack + traffic, without harming legitimate clients. (Note, however, that the + RRset returned is the first one found in the database; it is not + necessarily the smallest available RRset.) Additionally, + :any:`minimal-responses` is turned on for these queries, so no + unnecessary records are added to the authority or additional + sections. The default is ``no``. + +.. namedconf:statement:: notify + :tags: transfer + :short: Controls whether ``NOTIFY`` messages are sent on zone changes. + + If set to ``yes`` (the default), DNS NOTIFY messages are sent when a + zone the server is authoritative for changes; see :ref:`using notify<notify>`. + The messages are sent to the servers listed in the zone's NS records + (except the primary server identified in the SOA MNAME field), and to + any servers listed in the :any:`also-notify` option. + + If set to ``primary-only`` (or the older keyword ``master-only``), + notifies are only sent for primary zones. If set to ``explicit``, + notifies are sent only to servers explicitly listed using + :any:`also-notify`. If set to ``no``, no notifies are sent. + + The :namedconf:ref:`notify` option may also be specified in the :any:`zone` + statement, in which case it overrides the ``options notify`` + statement. It would only be necessary to turn off this option if it + caused secondary zones to crash. + +.. namedconf:statement:: notify-to-soa + :tags: transfer + :short: Controls whether the name servers in the NS RRset are checked against the SOA MNAME. + + If ``yes``, do not check the name servers in the NS RRset against the + SOA MNAME. Normally a NOTIFY message is not sent to the SOA MNAME + (SOA ORIGIN), as it is supposed to contain the name of the ultimate + primary server. Sometimes, however, a secondary server is listed as the SOA MNAME in + hidden primary configurations; in that case, the + ultimate primary should be set to still send NOTIFY messages to all the name servers + listed in the NS RRset. + +.. namedconf:statement:: recursion + :tags: query + :short: Defines whether recursion and caching are allowed. + + If ``yes``, and a DNS query requests recursion, then the server + attempts to do all the work required to answer the query. If recursion + is off and the server does not already know the answer, it + returns a referral response. The default is ``yes``. Note that setting + ``recursion no`` does not prevent clients from getting data from the + server's cache; it only prevents new data from being cached as an + effect of client queries. Caching may still occur as an effect of the + server's internal operation, such as NOTIFY address lookups. + +.. namedconf:statement:: request-nsid + :tags: query + :short: Controls whether an empty EDNS(0) NSID (Name Server Identifier) option is sent with all queries to authoritative name servers during iterative resolution. + + If ``yes``, then an empty EDNS(0) NSID (Name Server Identifier) + option is sent with all queries to authoritative name servers during + iterative resolution. If the authoritative server returns an NSID + option in its response, then its contents are logged in the ``nsid`` + category at level ``info``. The default is ``no``. + +.. namedconf:statement:: require-server-cookie + :tags: query + :short: Controls whether a valid server cookie is required before sending a full response to a UDP request. + + If ``yes``, require a valid server cookie before sending a full response to a UDP + request from a cookie-aware client. BADCOOKIE is sent if there is a + bad or nonexistent server cookie. + + The default is ``no``. + + Users wishing to test that DNS COOKIE clients correctly handle + BADCOOKIE, or who are getting a lot of forged DNS requests with DNS COOKIES + present, should set this to ``yes``. Setting this to ``yes`` results in a reduced amplification effect + in a reflection attack, as the BADCOOKIE response is smaller than a full + response, while also requiring a legitimate client to follow up with a second + query with the new, valid, cookie. + +.. namedconf:statement:: answer-cookie + :tags: query + :short: Controls whether COOKIE EDNS replies are sent in response to client queries. + + When set to the default value of ``yes``, COOKIE EDNS options are + sent when applicable in replies to client queries. If set to ``no``, + COOKIE EDNS options are not sent in replies. This can only be set + at the global options level, not per-view. + + ``answer-cookie no`` is intended as a temporary measure, for use when + :iscman:`named` shares an IP address with other servers that do not yet + support DNS COOKIE. A mismatch between servers on the same address is + not expected to cause operational problems, but the option to disable + COOKIE responses so that all servers have the same behavior is + provided out of an abundance of caution. DNS COOKIE is an important + security mechanism, and should not be disabled unless absolutely + necessary. + +.. namedconf:statement:: send-cookie + :tags: query + :short: Controls whether a COOKIE EDNS option is sent along with a query. + + If ``yes``, then a COOKIE EDNS option is sent along with the query. + If the resolver has previously communicated with the server, the COOKIE + returned in the previous transaction is sent. This is used by the + server to determine whether the resolver has talked to it before. A + resolver sending the correct COOKIE is assumed not to be an off-path + attacker sending a spoofed-source query; the query is therefore + unlikely to be part of a reflection/amplification attack, so + resolvers sending a correct COOKIE option are not subject to response + rate limiting (RRL). Resolvers which do not send a correct COOKIE + option may be limited to receiving smaller responses via the + :any:`nocookie-udp-size` option. + + The :iscman:`named` server may determine that COOKIE is not supported by the + remote server and not add a COOKIE EDNS option to requests. + + The default is ``yes``. + +.. namedconf:statement:: stale-answer-enable + :tags: server, query + :short: Enables the returning of "stale" cached answers when the name servers for a zone are not answering. + + If ``yes``, enable the returning of "stale" cached answers when the name + servers for a zone are not answering and the :any:`stale-cache-enable` option is + also enabled. The default is not to return stale answers. + + Stale answers can also be enabled or disabled at runtime via + :option:`rndc serve-stale on <rndc serve-stale>` or :option:`rndc serve-stale off <rndc serve-stale>`; these override + the configured setting. :option:`rndc serve-stale reset <rndc serve-stale>` restores the + setting to the one specified in :iscman:`named.conf`. Note that if stale + answers have been disabled by :iscman:`rndc`, they cannot be + re-enabled by reloading or reconfiguring :iscman:`named`; they must be + re-enabled with :option:`rndc serve-stale on <rndc serve-stale>`, or the server must be + restarted. + + Information about stale answers is logged under the ``serve-stale`` + log category. + +.. namedconf:statement:: stale-answer-client-timeout + :tags: server, query + :short: Defines the amount of time (in milliseconds) that :iscman:`named` waits before attempting to answer a query with a stale RRset from cache. + + This option defines the amount of time (in milliseconds) that :iscman:`named` + waits before attempting to answer the query with a stale RRset from cache. + If a stale answer is found, :iscman:`named` continues the ongoing fetches, + attempting to refresh the RRset in cache until the + :any:`resolver-query-timeout` interval is reached. + + This option is off by default, which is equivalent to setting it to + ``off`` or ``disabled``. It also has no effect if :any:`stale-answer-enable` + is disabled. + + The maximum value for this option is :any:`resolver-query-timeout` minus + one second. The minimum value, ``0``, causes a cached (stale) RRset to be + immediately returned if it is available while still attempting to + refresh the data in cache. :rfc:`8767` recommends a value of ``1800`` + (milliseconds). + +.. namedconf:statement:: stale-cache-enable + :tags: server, query + :short: Enables the retention of "stale" cached answers. + + If ``yes``, enable the retaining of "stale" cached answers. Default ``no``. + +.. namedconf:statement:: stale-refresh-time + :tags: server, query + :short: Sets the time window for the return of "stale" cached answers before the next attempt to contact, if the name servers for a given zone are not responding. + + If the name servers for a given zone are not answering, this sets the time + window for which :iscman:`named` will promptly return "stale" cached answers for + that RRSet being requested before a new attempt in contacting the servers + is made. For convenience, TTL-style time-unit suffixes may be used to + specify the value. It also accepts ISO 8601 duration formats. + + The default :any:`stale-refresh-time` is 30 seconds, as :rfc:`8767` recommends + that attempts to refresh to be done no more frequently than every 30 + seconds. A value of zero disables the feature, meaning that normal + resolution will take place first, if that fails only then :iscman:`named` will + return "stale" cached answers. + +.. namedconf:statement:: nocookie-udp-size + :tags: query + :short: Sets the maximum size of UDP responses that are sent to queries without a valid server COOKIE. + + This sets the maximum size of UDP responses that are sent to queries + without a valid server COOKIE. A value below 128 is silently + raised to 128. The default value is 4096, but the :any:`max-udp-size` + option may further limit the response size as the default for + :any:`max-udp-size` is 1232. + +.. namedconf:statement:: cookie-algorithm + :tags: server + :short: Sets the algorithm to be used when generating a server cookie. + + This sets the algorithm to be used when generating the server cookie; the options are + "aes" or "siphash24". The default is "siphash24". The "aes" option remains for legacy + purposes. + +.. namedconf:statement:: cookie-secret + :tags: server + :short: Specifies a shared secret used for generating and verifying EDNS COOKIE options within an anycast cluster. + + If set, this is a shared secret used for generating and verifying + EDNS COOKIE options within an anycast cluster. If not set, the system + generates a random secret at startup. The shared secret is + encoded as a hex string and needs to be 128 bits for either "siphash24" + or "aes". + + If there are multiple secrets specified, the first one listed in + :iscman:`named.conf` is used to generate new server cookies. The others + are only used to verify returned cookies. + +.. namedconf:statement:: response-padding + :tags: query + :short: Adds an EDNS Padding option to encrypted messages, to reduce the chance of guessing the contents based on size. + + The EDNS Padding option is intended to improve confidentiality when + DNS queries are sent over an encrypted channel, by reducing the + variability in packet sizes. If a query: + + 1. contains an EDNS Padding option, + 2. includes a valid server cookie or uses TCP, + 3. is not signed using TSIG or SIG(0), and + 4. is from a client whose address matches the specified ACL, + + then the response is padded with an EDNS Padding option to a multiple + of ``block-size`` bytes. If these conditions are not met, the + response is not padded. + + If ``block-size`` is 0 or the ACL is ``none;``, this feature is + disabled and no padding occurs; this is the default. If + ``block-size`` is greater than 512, a warning is logged and the value + is truncated to 512. Block sizes are ordinarily expected to be powers + of two (for instance, 128), but this is not mandatory. + +.. namedconf:statement:: trust-anchor-telemetry + :tags: dnssec + :short: Instructs :iscman:`named` to send specially formed queries once per day to domains for which trust anchors have been configured. + + This causes :iscman:`named` to send specially formed queries once per day to + domains for which trust anchors have been configured via, e.g., + :any:`trust-anchors` or ``dnssec-validation auto``. + + The query name used for these queries has the form + ``_ta-xxxx(-xxxx)(...).<domain>``, where each "xxxx" is a group of four + hexadecimal digits representing the key ID of a trusted DNSSEC key. + The key IDs for each domain are sorted smallest to largest prior to + encoding. The query type is NULL. + + By monitoring these queries, zone operators are able to see which + resolvers have been updated to trust a new key; this may help them + decide when it is safe to remove an old one. + + The default is ``yes``. + +.. namedconf:statement:: provide-ixfr + :tags: transfer + :short: Controls whether a primary responds to an incremental zone request (IXFR) or only responds with a full zone transfer (AXFR). + + The :any:`provide-ixfr` clause determines whether the local server, acting + as primary, responds with an incremental zone transfer when the given + remote server, a secondary, requests it. If set to ``yes``, incremental + transfer is provided whenever possible. If set to ``no``, all + transfers to the remote server are non-incremental. + +.. namedconf:statement:: request-ixfr + :tags: transfer + :short: Controls whether a secondary requests an incremental zone transfer (IXFR) or a full zone transfer (AXFR). + + The :any:`request-ixfr` statement determines whether the local server, acting + as a secondary, requests incremental zone transfers from the given + remote server, a primary. + + IXFR requests to servers that do not support IXFR automatically + fall back to AXFR. Therefore, there is no need to manually list which + servers support IXFR and which ones do not; the global default of + ``yes`` should always work. The purpose of the :any:`provide-ixfr` and + :any:`request-ixfr` statements is to make it possible to disable the use of + IXFR even when both primary and secondary claim to support it: for example, if + one of the servers is buggy and crashes or corrupts data when IXFR is + used. + + It may also be set in the zone block; if set there, it overrides the global + or view setting for that zone. It may also be set in the + :namedconf:ref:`server` block. + +.. namedconf:statement:: request-expire + :tags: transfer, query + :short: Specifies whether the local server requests the EDNS EXPIRE value, when acting as a secondary. + + The :any:`request-expire` statement determines whether the local server, when + acting as a secondary, requests the EDNS EXPIRE value. The EDNS EXPIRE + value indicates the remaining time before the zone data expires and + needs to be refreshed. This is used when a secondary server transfers + a zone from another secondary server; when transferring from the + primary, the expiration timer is set from the EXPIRE field of the SOA + record instead. The default is ``yes``. + +.. namedconf:statement:: match-mapped-addresses + :tags: server + :short: Allows IPv4-mapped IPv6 addresses to match address-match list entries for corresponding IPv4 addresses. + + If ``yes``, then an IPv4-mapped IPv6 address matches any + address-match list entries that match the corresponding IPv4 address. + + This option was introduced to work around a kernel quirk in some + operating systems that causes IPv4 TCP connections, such as zone + transfers, to be accepted on an IPv6 socket using mapped addresses. + This caused address-match lists designed for IPv4 to fail to match. + However, :iscman:`named` now solves this problem internally. The use of + this option is discouraged. + +.. namedconf:statement:: ixfr-from-differences + :tags: transfer + :short: Controls how IXFR transfers are calculated. + + When ``yes`` and the server loads a new version of a primary zone from + its zone file or receives a new version of a secondary file via zone + transfer, it compares the new version to the previous one and + calculates a set of differences. The differences are then logged in + the zone's journal file so that the changes can be transmitted to + downstream secondaries as an incremental zone transfer. + + By allowing incremental zone transfers to be used for non-dynamic + zones, this option saves bandwidth at the expense of increased CPU + and memory consumption at the primary server. In particular, if the new + version of a zone is completely different from the previous one, the + set of differences is of a size comparable to the combined size + of the old and new zone versions, and the server needs to + temporarily allocate memory to hold this complete difference set. + + :any:`ixfr-from-differences` also accepts ``primary`` + and ``secondary`` at the view and options levels, + which causes :any:`ixfr-from-differences` to be enabled for all primary + or secondary zones, respectively. It is off for all zones by default. + + Note: if inline signing is enabled for a zone, the user-provided + :any:`ixfr-from-differences` setting is ignored for that zone. + +.. namedconf:statement:: multi-master + :tags: transfer + :short: Controls whether serial number mismatch errors are logged. + + This should be set when there are multiple primary servers for a zone and the + addresses refer to different machines. If ``yes``, :iscman:`named` does not + log when the serial number on the primary is less than what :iscman:`named` + currently has. The default is ``no``. + +.. namedconf:statement:: auto-dnssec + :tags: dnssec + :short: Permits varying levels of automatic DNSSEC key management. + + Zones configured for dynamic DNS may use this option to allow varying + levels of automatic DNSSEC key management. There are three possible + settings: + + ``auto-dnssec allow;`` permits keys to be updated and the zone fully + re-signed whenever the user issues the command :option:`rndc sign zonename <rndc sign>`. + + ``auto-dnssec maintain;`` includes the above, but also + automatically adjusts the zone's DNSSEC keys on a schedule, according + to the keys' timing metadata (see :ref:`man_dnssec-keygen` and + :ref:`man_dnssec-settime`). The command :option:`rndc sign zonename <rndc sign>` + causes :iscman:`named` to load keys from the key repository and sign the + zone with all keys that are active. :option:`rndc loadkeys zonename <rndc loadkeys>` + causes :iscman:`named` to load keys from the key repository and schedule + key maintenance events to occur in the future, but it does not sign + the full zone immediately. Note: once keys have been loaded for a + zone the first time, the repository is searched for changes + periodically, regardless of whether :option:`rndc loadkeys` is used. The + recheck interval is defined by :any:`dnssec-loadkeys-interval`. + + ``auto-dnssec off;`` does not allow for DNSSEC key management. + This is the default setting. + + This option may only be activated at the zone level; if configured + at the view or options level, it must be set to ``off``. + + The DNSSEC records are written to the zone's filename set in :any:`file`, + unless :any:`inline-signing` is enabled. + +.. namedconf:statement:: dnssec-validation + :tags: dnssec + :short: Enables DNSSEC validation in :iscman:`named`. + + This option enables DNSSEC validation in :iscman:`named`. + + If set to ``auto``, DNSSEC validation is enabled and a default trust + anchor for the DNS root zone is used. This trust anchor is provided + as part of BIND and is kept up-to-date using :ref:`rfc5011.support` key + management. + + If set to ``yes``, DNSSEC validation is enabled, but a trust anchor must be + manually configured using a :any:`trust-anchors` statement (or the + :any:`managed-keys` or :any:`trusted-keys` statements, both deprecated). If + there is no configured trust anchor, validation does not take place. + + If set to ``no``, DNSSEC validation is disabled. + + The default is ``auto``, unless BIND is built with + ``configure --disable-auto-validation``, in which case the default is + ``yes``. + + The default root trust anchor is stored in the file ``bind.keys``. + :iscman:`named` loads that key at startup if :any:`dnssec-validation` is + set to ``auto``. A copy of the file is installed along with BIND 9, + and is current as of the release date. If the root key expires, a new + copy of ``bind.keys`` can be downloaded from + https://www.isc.org/bind-keys. + + (To prevent problems if ``bind.keys`` is not found, the current trust + anchor is also compiled in :iscman:`named`. Relying on this is not + recommended, however, as it requires :iscman:`named` to be recompiled with + a new key when the root key expires.) + + .. note:: :iscman:`named` loads *only* the root key from ``bind.keys``. The file + cannot be used to store keys for other zones. The root key in + ``bind.keys`` is ignored if ``dnssec-validation auto`` is not in + use. + + Whenever the resolver sends out queries to an EDNS-compliant + server, it always sets the DO bit indicating it can support DNSSEC + responses, even if :any:`dnssec-validation` is off. + +.. namedconf:statement:: validate-except + :tags: dnssec + :short: Specifies a list of domain names at and beneath which DNSSEC validation should not be performed. + + This specifies a list of domain names at and beneath which DNSSEC + validation should *not* be performed, regardless of the presence of a + trust anchor at or above those names. This may be used, for example, + when configuring a top-level domain intended only for local use, so + that the lack of a secure delegation for that domain in the root zone + does not cause validation failures. (This is similar to setting a + negative trust anchor except that it is a permanent configuration, + whereas negative trust anchors expire and are removed after a set + period of time.) + +.. namedconf:statement:: dnssec-accept-expired + :tags: dnssec + :short: Instructs BIND 9 to accept expired DNSSEC signatures when validating. + + This accepts expired signatures when verifying DNSSEC signatures. The + default is ``no``. Setting this option to ``yes`` leaves :iscman:`named` + vulnerable to replay attacks. + +.. namedconf:statement:: querylog + :tags: logging, server + :short: Specifies whether query logging should be active when :iscman:`named` first starts. + + Query logging provides a complete log of all incoming queries and all query + errors. This provides more insight into the server's activity, but with a + cost to performance which may be significant on heavily loaded servers. + + The :any:`querylog` option specifies whether query logging should be active when + :iscman:`named` first starts. If :any:`querylog` is not specified, then query logging + is determined by the presence of the logging category ``queries``. Query + logging can also be activated at runtime using the command ``rndc querylog + on``, or deactivated with :option:`rndc querylog off <rndc querylog>`. + +.. namedconf:statement:: check-names + :tags: query, server + :short: Restricts the character set and syntax of certain domain names in primary files and/or DNS responses received from the network. + + This option is used to restrict the character set and syntax of + certain domain names in primary files and/or DNS responses received + from the network. The default varies according to usage area. For + :any:`type primary` zones the default is ``fail``. For :any:`type secondary` zones the + default is ``warn``. For answers received from the network + (``response``), the default is ``ignore``. + + The rules for legal hostnames and mail domains are derived from + :rfc:`952` and :rfc:`821` as modified by :rfc:`1123`. + + :any:`check-names` applies to the owner names of A, AAAA, and MX records. + It also applies to the domain names in the RDATA of NS, SOA, MX, and + SRV records. It further applies to the RDATA of PTR records where the + owner name indicates that it is a reverse lookup of a hostname (the + owner name ends in IN-ADDR.ARPA, IP6.ARPA, or IP6.INT). + +.. namedconf:statement:: check-dup-records + :tags: dnssec, query + :short: Checks primary zones for records that are treated as different by DNSSEC but are semantically equal in plain DNS. + + This checks primary zones for records that are treated as different by + DNSSEC but are semantically equal in plain DNS. The default is to + ``warn``. Other possible values are ``fail`` and ``ignore``. + +.. namedconf:statement:: check-mx + :tags: zone + :short: Checks whether an MX record appears to refer to an IP address. + + This checks whether the MX record appears to refer to an IP address. The + default is to ``warn``. Other possible values are ``fail`` and + ``ignore``. + +.. namedconf:statement:: check-wildcard + :tags: zone + :short: Checks for non-terminal wildcards. + + This option is used to check for non-terminal wildcards. The use of + non-terminal wildcards is almost always as a result of a lack of + understanding of the wildcard-matching algorithm (:rfc:`1034`). This option + affects primary zones. The default (``yes``) is to check for + non-terminal wildcards and issue a warning. + +.. namedconf:statement:: check-integrity + :tags: zone + :short: Performs post-load zone integrity checks on primary zones. + + This performs post-load zone integrity checks on primary zones. It checks + that MX and SRV records refer to address (A or AAAA) records and that + glue address records exist for delegated zones. For MX and SRV + records, only in-zone hostnames are checked (for out-of-zone hostnames, + use :iscman:`named-checkzone`). For NS records, only names below top-of-zone + are checked (for out-of-zone names and glue consistency checks, use + :iscman:`named-checkzone`). The default is ``yes``. + + The use of the SPF record to publish Sender Policy Framework is + deprecated, as the migration from using TXT records to SPF records was + abandoned. Enabling this option also checks that a TXT Sender Policy + Framework record exists (starts with "v=spf1") if there is an SPF + record. Warnings are emitted if the TXT record does not exist; they can + be suppressed with :any:`check-spf`. + +.. namedconf:statement:: check-mx-cname + :tags: zone + :short: Sets the response to MX records that refer to CNAMEs. + + If :any:`check-integrity` is set, then fail, warn, or ignore MX records + that refer to CNAMEs. The default is to ``warn``. + +.. namedconf:statement:: check-srv-cname + :tags: zone + :short: Sets the response to SRV records that refer to CNAMEs. + + If :any:`check-integrity` is set, then fail, warn, or ignore SRV records + that refer to CNAMEs. The default is to ``warn``. + +.. namedconf:statement:: check-sibling + :tags: zone + :short: Specifies whether to check for sibling glue when performing integrity checks. + + When performing integrity checks, also check that sibling glue + exists. The default is ``yes``. + +.. namedconf:statement:: check-spf + :tags: zone + :short: Specifies whether to check for a TXT Sender Policy Framework record, if an SPF record is present. + + If :any:`check-integrity` is set, check that there is a TXT Sender + Policy Framework record present (starts with "v=spf1") if there is an + SPF record present. The default is ``warn``. + +.. namedconf:statement:: zero-no-soa-ttl + :tags: zone, query, server + :short: Specifies whether to set the time to live (TTL) of the SOA record to zero, when returning authoritative negative responses to SOA queries. + + If ``yes``, when returning authoritative negative responses to SOA queries, set + the TTL of the SOA record returned in the authority section to zero. + The default is ``yes``. + +.. namedconf:statement:: zero-no-soa-ttl-cache + :tags: zone, query, server + :short: Sets the time to live (TTL) to zero when caching a negative response to an SOA query. + + If ``yes``, when caching a negative response to an SOA query set the TTL to zero. + The default is ``no``. + +.. namedconf:statement:: update-check-ksk + :tags: zone, dnssec + :short: Specifies whether to check the KSK bit to determine how a key should be used, when generating RRSIGs for a secure zone. + + When set to the default value of ``yes``, check the KSK bit in each + key to determine how the key should be used when generating RRSIGs + for a secure zone. + + Ordinarily, zone-signing keys (that is, keys without the KSK bit set) + are used to sign the entire zone, while key-signing keys (keys with + the KSK bit set) are only used to sign the DNSKEY RRset at the zone + apex. However, if this option is set to ``no``, then the KSK bit is + ignored; KSKs are treated as if they were ZSKs and are used to sign + the entire zone. This is similar to the :option:`dnssec-signzone -z` + command-line option. + + When this option is set to ``yes``, there must be at least two active + keys for every algorithm represented in the DNSKEY RRset: at least + one KSK and one ZSK per algorithm. If there is any algorithm for + which this requirement is not met, this option is ignored for + that algorithm. + +.. namedconf:statement:: dnssec-dnskey-kskonly + :tags: dnssec + :short: Specifies that only key-signing keys are used to sign the DNSKEY, CDNSKEY, and CDS RRsets at a zone's apex. + + When this option and :any:`update-check-ksk` are both set to ``yes``, + only key-signing keys (that is, keys with the KSK bit set) are + used to sign the DNSKEY, CDNSKEY, and CDS RRsets at the zone apex. + Zone-signing keys (keys without the KSK bit set) are used to sign + the remainder of the zone, but not the DNSKEY RRset. This is similar + to the :option:`dnssec-signzone -x` command-line option. + + The default is ``yes``. If :any:`update-check-ksk` is set to ``no``, this + option is ignored. + +.. namedconf:statement:: try-tcp-refresh + :tags: transfer + :short: Specifies that BIND 9 should attempt to refresh a zone using TCP if UDP queries fail. + + If ``yes``, try to refresh the zone using TCP if UDP queries fail. The default is + ``yes``. + +.. namedconf:statement:: dnssec-secure-to-insecure + :tags: dnssec + :short: Allows a dynamic zone to transition from secure to insecure by deleting all DNSKEY records. + + This allows a dynamic zone to transition from secure to insecure (i.e., + signed to unsigned) by deleting all of the DNSKEY records. The + default is ``no``. If set to ``yes``, and if the DNSKEY RRset at the + zone apex is deleted, all RRSIG and NSEC records are removed from + the zone as well. + + If the zone uses NSEC3, it is also necessary to delete the + NSEC3PARAM RRset from the zone apex; this causes the removal of + all corresponding NSEC3 records. (It is expected that this + requirement will be eliminated in a future release.) + + Note that if a zone has been configured with ``auto-dnssec maintain`` + and the private keys remain accessible in the key repository, + the zone will be automatically signed again the next time :iscman:`named` + is started. + +.. namedconf:statement:: synth-from-dnssec + :tags: dnssec + :short: Enables support for :rfc:`8198`, Aggressive Use of DNSSEC-Validated Cache. + + This option enables support for :rfc:`8198`, Aggressive Use of + DNSSEC-Validated Cache. It allows the resolver to send a smaller number + of queries when resolving queries for DNSSEC-signed domains + by synthesizing answers from cached NSEC and other RRsets that + have been proved to be correct using DNSSEC. + The default is ``yes``. + + .. note:: DNSSEC validation must be enabled for this option to be effective. + This initial implementation only covers synthesis of answers from + NSEC records; synthesis from NSEC3 is planned for the future. This + will also be controlled by :any:`synth-from-dnssec`. + +Forwarding +^^^^^^^^^^ + +The forwarding facility can be used to create a large site-wide cache on +a few servers, reducing traffic over links to external name servers. It +can also be used to allow queries by servers that do not have direct +access to the Internet, but wish to look up exterior names anyway. +Forwarding occurs only on those queries for which the server is not +authoritative and does not have the answer in its cache. + +.. namedconf:statement:: forward + :tags: query + :short: Allows or disallows fallback to recursion if forwarding has failed; it is always used in conjunction with the :any:`forwarders` statement. + + This option is only meaningful if the forwarders list is not empty. A + value of ``first`` is the default and causes the server to query the + forwarders first; if that does not answer the question, the + server then looks for the answer itself. If ``only`` is + specified, the server only queries the forwarders. + +.. namedconf:statement:: forwarders + :tags: query + :short: Defines one or more hosts to which queries are forwarded. + + This specifies a list of IP addresses to which queries are forwarded. The + default is the empty list (no forwarding). Each address in the list can be + associated with an optional port number. A default port number can be set + for the entire list. + +Forwarding can also be configured on a per-domain basis, allowing for +the global forwarding options to be overridden in a variety of ways. +Particular domains can be set to use different forwarders, or have a +different ``forward only/first`` behavior, or not forward at all; see +:any:`zone`. + +.. _dual_stack: + +Dual-stack Servers +^^^^^^^^^^^^^^^^^^ + +Dual-stack servers are used as servers of last resort, to work around +problems in reachability due to the lack of support for either IPv4 or IPv6 +on the host machine. + +.. namedconf:statement:: dual-stack-servers + :tags: server + :short: Specifies host names or addresses of machines with access to both IPv4 and IPv6 transports. + + This specifies host names or addresses of machines with access to both + IPv4 and IPv6 transports. If a hostname is used, the server must be + able to resolve the name using only the transport it has. If the + machine is dual-stacked, the :any:`dual-stack-servers` parameter has no + effect unless access to a transport has been disabled on the command + line (e.g., :option:`named -4`). + +.. _access_control: + +Access Control +^^^^^^^^^^^^^^ + +Access to the server can be restricted based on the IP address of the +requesting system. See :ref:`address_match_lists` +for details on how to specify IP address lists. + +.. namedconf:statement:: allow-notify + :tags: transfer + :short: Defines an :any:`address_match_list` that is allowed to send ``NOTIFY`` messages for the zone, in addition to addresses defined in the :any:`primaries` option for the zone. + + This ACL specifies which hosts may send NOTIFY messages to inform + this server of changes to zones for which it is acting as a secondary + server. This is only applicable for secondary zones (i.e., :any:`type + secondary` or ``slave``). + + If this option is set in :any:`view` or :namedconf:ref:`options`, it is globally + applied to all secondary zones. If set in the :any:`zone` statement, the + global value is overridden. + + If not specified, the default is to process NOTIFY messages only from + the configured :any:`primaries` for the zone. :any:`allow-notify` can be used + to expand the list of permitted hosts, not to reduce it. + +.. namedconf:statement:: allow-query + :tags: query + :short: Specifies which hosts (an IP address list) are allowed to send queries to this resolver. + + :any:`allow-query` may also be specified in the :any:`zone` statement, in + which case it overrides the ``options allow-query`` statement. If not + specified, the default is to allow queries from all hosts. + + .. note:: :any:`allow-query-cache` is used to specify access to the cache. + +.. namedconf:statement:: allow-query-on + :tags: query + :short: Specifies which local addresses (an IP address list) are allowed to send queries to this resolver. Used in multi-homed configurations. + + This makes it possible, for instance, to allow queries on + internal-facing interfaces but disallow them on external-facing ones, + without necessarily knowing the internal network's addresses. + + Note that :any:`allow-query-on` is only checked for queries that are + permitted by :any:`allow-query`. A query must be allowed by both ACLs, + or it is refused. + + :any:`allow-query-on` may also be specified in the :any:`zone` statement, + in which case it overrides the ``options allow-query-on`` statement. + + If not specified, the default is to allow queries on all addresses. + + .. note:: :any:`allow-query-cache` is used to specify access to the cache. + +.. namedconf:statement:: allow-query-cache + :tags: query + :short: Specifies which hosts (an IP address list) can access this server's cache and thus effectively controls recursion. + + Defines an :term:`address_match_list` of IP address(es) which are allowed to + issue queries that access the local cache. Without access to the local + cache recursive queries are effectively useless so, in effect, this + statement (or its default) controls recursive behavior. This statement's + default setting depends on: + + 1. If :namedconf:ref:`recursion no; <recursion>` present, defaults to + ``allow-query-cache {none;};``. No local cache access permitted. + + 2. If :namedconf:ref:`recursion yes; <recursion>` (default) then, if + :any:`allow-recursion` present, defaults to the value of + :any:`allow-recursion`. Local cache access permitted to the same + :term:`address_match_list` as :any:`allow-recursion`. + + 3. If :namedconf:ref:`recursion yes; <recursion>` (default) then, if + :any:`allow-recursion` is **not** present, defaults to + ``allow-query-cache {localnets; localhost;};``. Local cache access permitted + to :term:`address_match_list` localnets and localhost IP addresses only. + +.. namedconf:statement:: allow-query-cache-on + :tags: query + :short: Specifies which hosts (an IP address list) can access this server's cache. Used on servers with multiple interfaces. + + This specifies which local addresses can send answers from the cache. If + :any:`allow-query-cache-on` is not set, then :any:`allow-recursion-on` is + used if set. Otherwise, the default is to allow cache responses to be + sent from any address. Note: both :any:`allow-query-cache` and + :any:`allow-query-cache-on` must be satisfied before a cache response + can be sent; a client that is blocked by one cannot be allowed by the + other. + +.. namedconf:statement:: allow-recursion + :tags: query + :short: Defines an :any:`address_match_list` of clients that are allowed to perform recursive queries. + + This specifies which hosts are allowed to make recursive queries through + this server. BIND checks to see if the following parameters are set, in + order: :any:`allow-query-cache` and :any:`allow-query`. If neither of those parameters + is set, the default (localnets; localhost;) is used. + +.. namedconf:statement:: allow-recursion-on + :tags: query, server + :short: Specifies which local addresses can accept recursive queries. + + This specifies which local addresses can accept recursive queries. If + :any:`allow-recursion-on` is not set, then :any:`allow-query-cache-on` is + used if set; otherwise, the default is to allow recursive queries on + all addresses. Any client permitted to send recursive queries can + send them to any address on which :iscman:`named` is listening. Note: both + :any:`allow-recursion` and :any:`allow-recursion-on` must be satisfied + before recursion is allowed; a client that is blocked by one cannot + be allowed by the other. + +.. namedconf:statement:: allow-update + :tags: transfer + :short: Defines an :any:`address_match_list` of hosts that are allowed to submit dynamic updates for primary zones. + + A simple access control list. + When set in the :any:`zone` statement for a primary zone, this specifies which + hosts are allowed to submit dynamic DNS updates to that zone. The + default is to deny updates from all hosts. + + Note that allowing updates based on the requestor's IP address is + insecure; see :ref:`dynamic_update_security` for details. + + In general, this option should only be set at the :any:`zone` level. + While a default value can be set at the :namedconf:ref:`options` or :any:`view` level + and inherited by zones, this could lead to some zones unintentionally + allowing updates. + + Updates are written to the zone's filename that is set in :any:`file`. + +.. namedconf:statement:: allow-update-forwarding + :tags: transfer + :short: Defines an :any:`address_match_list` of hosts that are allowed to submit dynamic updates to a secondary server for transmission to a primary. + + When set in the :any:`zone` statement for a secondary zone, this specifies which + hosts are allowed to submit dynamic DNS updates and have them be + forwarded to the primary. The default is ``{ none; }``, which means + that no update forwarding is performed. + + To enable update forwarding, specify + ``allow-update-forwarding { any; };`` in the :any:`zone` statement. + Specifying values other than ``{ none; }`` or ``{ any; }`` is usually + counterproductive; the responsibility for update access control + should rest with the primary server, not the secondary. + + Note that enabling the update forwarding feature on a secondary server + may expose primary servers to attacks if they rely on insecure + IP-address-based access control; see :ref:`dynamic_update_security` for more details. + + In general this option should only be set at the :any:`zone` level. + While a default value can be set at the :namedconf:ref:`options` or :any:`view` level + and inherited by zones, this can lead to some zones unintentionally + forwarding updates. + +.. namedconf:statement:: allow-transfer + :tags: transfer + :short: Defines an :any:`address_match_list` of hosts that are allowed to transfer the zone information from this server. + + This specifies which hosts are allowed to receive zone transfers from the + server. :any:`allow-transfer` may also be specified in the :any:`zone` + statement, in which case it overrides the :any:`allow-transfer` + statement set in :namedconf:ref:`options` or :any:`view`. If not specified, the + default is to allow transfers to all hosts. + + The transport level limitations can also be specified. In particular, + zone transfers can be restricted to a specific port and/or DNS + transport protocol by using the options :term:`port` and ``transport``. + Either option can be specified; if both are used, both constraints + must be satisfied in order for the transfer to be allowed. Zone + transfers are currently only possible via the TCP and TLS transports. + + For example: ``allow-transfer port 853 transport tls { any; };`` + allows outgoing zone transfers to any host using the TLS transport + over port 853. + +.. warning:: + + Please note that incoming TLS connections are + **not authenticated at the TLS level by default**. + Please use :ref:`tsig` to authenticate requestors + or consider implementing :ref:`Mutual TLS <mutual-tls>` + authentication. + +.. namedconf:statement:: blackhole + :tags: query + :short: Defines an :any:`address_match_list` of hosts to ignore. The server will neither respond to queries from nor send queries to these addresses. + + This specifies a list of addresses which the server does not accept queries + from or use to resolve a query. Queries from these addresses are not + responded to. The default is ``none``. + +.. namedconf:statement:: keep-response-order + :tags: server + :short: Defines an :any:`address_match_list` of addresses which do not accept reordered answers within a single TCP stream. + + This specifies a list of addresses to which the server sends responses + to TCP queries, in the same order in which they were received. This + disables the processing of TCP queries in parallel. The default is + ``none``. + +.. namedconf:statement:: no-case-compress + :tags: server + :short: Specifies a list of addresses that require case-insensitive compression in responses. + + This specifies a list of addresses which require responses to use + case-insensitive compression. This ACL can be used when :iscman:`named` + needs to work with clients that do not comply with the requirement in + :rfc:`1034` to use case-insensitive name comparisons when checking for + matching domain names. + + If left undefined, the ACL defaults to ``none``: case-insensitive + compression is used for all clients. If the ACL is defined and + matches a client, case is ignored when compressing domain + names in DNS responses sent to that client. + + This can result in slightly smaller responses; if a response contains + the names "example.com" and "example.COM", case-insensitive + compression treats the second one as a duplicate. It also + ensures that the case of the query name exactly matches the case of + the owner names of returned records, rather than matches the case of + the records entered in the zone file. This allows responses to + exactly match the query, which is required by some clients due to + incorrect use of case-sensitive comparisons. + + Case-insensitive compression is *always* used in AXFR and IXFR + responses, regardless of whether the client matches this ACL. + + There are circumstances in which :iscman:`named` does not preserve the case + of owner names of records: if a zone file defines records of + different types with the same name, but the capitalization of the + name is different (e.g., "www.example.com/A" and + "WWW.EXAMPLE.COM/AAAA"), then all responses for that name use + the *first* version of the name that was used in the zone file. This + limitation may be addressed in a future release. However, domain + names specified in the rdata of resource records (i.e., records of + type NS, MX, CNAME, etc.) always have their case preserved unless + the client matches this ACL. + +.. namedconf:statement:: resolver-query-timeout + :tags: query + :short: Specifies the length of time, in milliseconds, that a resolver attempts to resolve a recursive query before failing. + + This is the amount of time in milliseconds that the resolver spends + attempting to resolve a recursive query before failing. The default + and minimum is ``10000`` and the maximum is ``30000``. Setting it to + ``0`` results in the default being used. + + This value was originally specified in seconds. Values less than or + equal to 300 are treated as seconds and converted to + milliseconds before applying the above limits. + +.. _interfaces: + +Interfaces +^^^^^^^^^^ + +The interfaces, ports, and protocols that the server can use to answer +queries may be specified using the :any:`listen-on` and :any:`listen-on-v6` options. + +.. namedconf:statement:: listen-on + :tags: server + :short: Specifies the IPv4 addresses on which a server listens for DNS queries. + +.. namedconf:statement:: listen-on-v6 + :tags: server + :short: Specifies the IPv6 addresses on which a server listens for DNS queries. + + The :any:`listen-on` and :any:`listen-on-v6` statements can each take an optional + port, TLS configuration identifier, and/or HTTP configuration identifier, + in addition to an :term:`address_match_list`. + + The :term:`address_match_list` in :any:`listen-on` specifies the IPv4 addresses + on which the server will listen. (IPv6 addresses are ignored, with a + logged warning.) The server listens on all interfaces allowed by the + address match list. If no :any:`listen-on` is specified, the default is + to listen for standard DNS queries on port 53 of all IPv4 interfaces. + + :any:`listen-on-v6` takes an :term:`address_match_list` of IPv6 addresses. + The server listens on all interfaces allowed by the address match list. + If no :any:`listen-on-v6` is specified, the default is to listen for standard + DNS queries on port 53 of all IPv6 interfaces. + + If a TLS configuration is specified, :iscman:`named` will listen for DNS-over-TLS + (DoT) connections, using the key and certificate specified in the + referenced :any:`tls` statement. If the name ``ephemeral`` is used, + an ephemeral key and certificate created for the currently running + :iscman:`named` process will be used. + + If an HTTP configuration is specified, :iscman:`named` will listen for + DNS-over-HTTPS (DoH) connections using the HTTP endpoint specified in the + referenced :any:`http` statement. If the name ``default`` is used, then + :iscman:`named` will listen for connections at the default endpoint, + ``/dns-query``. + + Use of an :any:`http` specification requires :any:`tls` to be specified + as well. If an unencrypted connection is desired (for example, + on load-sharing servers behind a reverse proxy), ``tls none`` may be used. + + If a port number is not specified, the default is 53 for standard DNS, + 853 for DNS over TLS, 443 for DNS over HTTPS, and 80 for + DNS over HTTP (unencrypted). These defaults may be overridden using the + :namedconf:ref:`port`, :any:`tls-port`, :any:`https-port`, and :any:`http-port` options. + + Multiple :any:`listen-on` statements are allowed. For example: + + :: + + listen-on { 5.6.7.8; }; + listen-on port 1234 { !1.2.3.4; 1.2/16; }; + listen-on port 8853 tls ephemeral { 4.3.2.1; }; + listen-on port 8453 tls ephemeral http myserver { 8.7.6.5; }; + + The first two lines instruct the name server to listen for standard DNS + queries on port 53 of the IP address 5.6.7.8 and on port 1234 of an address + on the machine in net 1.2 that is not 1.2.3.4. The third line instructs the + server to listen for DNS-over-TLS connections on port 8853 of the IP + address 4.3.2.1 using the ephemeral key and certifcate. The fourth line + enables DNS-over-HTTPS connections on port 8453 of address 8.7.6.5, using + the ephemeral key and certificate, and the HTTP endpoint or endpoints + configured in an :any:`http` statement with the name ``myserver``. + + Multiple :any:`listen-on-v6` options can be used. For example: + + :: + + listen-on-v6 { any; }; + listen-on-v6 port 1234 { !2001:db8::/32; any; }; + listen-on port 8853 tls example-tls { 2001:db8::100; }; + listen-on port 8453 tls example-tls http default { 2001:db8::100; }; + listen-on port 8000 tls none http myserver { 2001:db8::100; }; + + The first two lines instruct the name server to listen for standard DNS + queries on port 53 of any IPv6 addresses, and on port 1234 of IPv6 + addresses that are not in the prefix 2001:db8::/32. The third line + instructs the server to listen for for DNS-over-TLS connections on port + 8853 of the address 2001:db8::100, using a TLS key and certificate specified + in the a :any:`tls` statement with the name ``example-tls``. The fourth + instructs the server to listen for DNS-over-HTTPS connections, again using + ``example-tls``, on the default HTTP endpoint. The fifth line, in which + the :any:`tls` parameter is set to ``none``, instructs the server to listen + for *unencrypted* DNS queries over HTTP at the endpoint specified in + ``myserver``.. + + To instruct the server not to listen on any IPv6 addresses, use: + + :: + + listen-on-v6 { none; }; + +.. _query_address: + +Query Address +^^^^^^^^^^^^^ + +.. namedconf:statement:: query-source + :tags: query + :short: Controls the IPv4 address from which queries are issued. + +.. namedconf:statement:: query-source-v6 + :tags: query + :short: Controls the IPv6 address from which queries are issued. + + If the server does not know the answer to a question, it queries other + name servers. :any:`query-source` specifies the address and port used for + such queries. For queries sent over IPv6, there is a separate + :any:`query-source-v6` option. If ``address`` is ``*`` (asterisk) or is + omitted, a wildcard IP address (``INADDR_ANY``) is used. + + The defaults of the :any:`query-source` and :any:`query-source-v6` options + are: + + :: + + query-source address * port *; + query-source-v6 address * port *; + + .. note:: ``port`` configuration is deprecated. A warning will be logged + when this parameter is used. + + .. note:: The address specified in the :any:`query-source` option is + used for both UDP and TCP queries, but the port applies only to UDP + queries. TCP queries always use a random unprivileged port. + +.. namedconf:statement:: use-v4-udp-ports + :tags: deprecated + :short: Specifies a list of ports that are valid sources for UDP/IPv4 messages. + +.. namedconf:statement:: use-v6-udp-ports + :tags: deprecated + :short: Specifies a list of ports that are valid sources for UDP/IPv6 messages. + + These statements, which are deprecated and will be removed in a future + release, specify a list of IPv4 and IPv6 UDP ports that are used as + source ports for UDP messages. + + If :term:`port` is ``*`` or is omitted, a random port number from a + pre-configured range is selected and used for each query. The + port range(s) are specified in the :any:`use-v4-udp-ports` (for IPv4) + and :any:`use-v6-udp-ports` (for IPv6) options. + + If :any:`use-v4-udp-ports` or :any:`use-v6-udp-ports` is unspecified, + :iscman:`named` checks whether the operating system provides a programming + interface to retrieve the system's default range for ephemeral ports. If + such an interface is available, :iscman:`named` uses the corresponding + system default range; otherwise, it uses its own defaults: + + :: + + use-v4-udp-ports { range 1024 65535; }; + use-v6-udp-ports { range 1024 65535; }; + +.. namedconf:statement:: avoid-v4-udp-ports + :tags: deprecated + :short: Specifies the range(s) of ports to be excluded from use as sources for UDP/IPv4 messages. + +.. namedconf:statement:: avoid-v6-udp-ports + :tags: deprecated + :short: Specifies the range(s) of ports to be excluded from use as sources for UDP/IPv6 messages. + + These statements, which are deprecated and will be removed in a future + release, specific ranges of port numbers to exclude from those specified + in the :any:`avoid-v4-udp-ports` and :any:`avoid-v6-udp-ports` + options, respectively. + + The defaults of the :any:`avoid-v4-udp-ports` and :any:`avoid-v6-udp-ports` + options are: + + :: + + avoid-v4-udp-ports {}; + avoid-v6-udp-ports {}; + + For example, with the following configuration: + + :: + + use-v6-udp-ports { range 32768 65535; }; + avoid-v6-udp-ports { 40000; range 50000 60000; }; + + UDP ports of IPv6 messages sent from :iscman:`named` are in one of the + following ranges: 32768 to 39999, 40001 to 49999, or 60001 to 65535. + + :any:`avoid-v4-udp-ports` and :any:`avoid-v6-udp-ports` can be used to prevent + :iscman:`named` from choosing as its random source port a port that is blocked + by a firewall or that is used by other applications; if a + query went out with a source port blocked by a firewall, the answer + would not pass through the firewall and the name server would have to query + again. Note: the desired range can also be represented only with + :any:`use-v4-udp-ports` and :any:`use-v6-udp-ports`, and the ``avoid-`` + options are redundant in that sense; they are provided for backward + compatibility and to possibly simplify the port specification. + + .. note:: Make sure the ranges are sufficiently large for security. A + desirable size depends on several parameters, but we generally recommend + it contain at least 16384 ports (14 bits of entropy). Note also that the + system's default range when used may be too small for this purpose, and + that the range may even be changed while :iscman:`named` is running; the new + range is automatically applied when :iscman:`named` is reloaded. Explicit + configuration of :any:`use-v4-udp-ports` and :any:`use-v6-udp-ports` is encouraged, + so that the ranges are sufficiently large and are reasonably + independent from the ranges used by other applications. + + .. note:: The operational configuration where :iscman:`named` runs may prohibit + the use of some ports. For example, Unix systems do not allow + :iscman:`named`, if run without root privilege, to use ports less than 1024. + If such ports are included in the specified (or detected) set of query + ports, the corresponding query attempts will fail, resulting in + resolution failures or delay. It is therefore important to configure the + set of ports that can be safely used in the expected operational + environment. + + .. warning:: Specifying a single port is discouraged, as it removes a layer of + protection against spoofing errors. + + .. warning:: The configured :term:`port` must not be the same as the listening port. + + .. note:: See also :any:`transfer-source`, :any:`notify-source` and :any:`parental-source`. + +.. _zone_transfers: + +Zone Transfers +^^^^^^^^^^^^^^ + +BIND has mechanisms in place to facilitate zone transfers and set limits +on the amount of load that transfers place on the system. The following +options apply to zone transfers. + +.. namedconf:statement:: also-notify + :tags: transfer + :short: Defines one or more hosts that are sent ``NOTIFY`` messages when zone changes occur. + + This option defines a global list of IP addresses of name servers that are also + sent NOTIFY messages whenever a fresh copy of the zone is loaded, in + addition to the servers listed in the zone's NS records. This helps + to ensure that copies of the zones quickly converge on stealth + servers. Optionally, a port may be specified with each + :any:`also-notify` address to send the notify messages to a port other + than the default of 53. An optional TSIG key can also be specified + with each address to cause the notify messages to be signed; this can + be useful when sending notifies to multiple views. In place of + explicit addresses, one or more named :any:`primaries` lists can be used. + + If an :any:`also-notify` list is given in a :any:`zone` statement, it + overrides the ``options also-notify`` statement. When a + ``zone notify`` statement is set to ``no``, the IP addresses in the + global :any:`also-notify` list are not sent NOTIFY messages for that + zone. The default is the empty list (no global notification list). + +.. namedconf:statement:: max-transfer-time-in + :tags: transfer + :short: Specifies the number of minutes after which inbound zone transfers are terminated. + + Inbound zone transfers running longer than this many minutes are + terminated. The default is 120 minutes (2 hours). The maximum value + is 28 days (40320 minutes). + +.. namedconf:statement:: max-transfer-idle-in + :tags: transfer + :short: Specifies the number of minutes after which inbound zone transfers making no progress are terminated. + + Inbound zone transfers making no progress in this many minutes are + terminated. The default is 60 minutes (1 hour). The maximum value + is 28 days (40320 minutes). + + .. note:: The inbound zone transfers are also affected by + ``tcp-idle-timeout``, the ``max-transfer-idle-in`` will close the + inbound zone transfer if there was no complete AXFR or no complete + IXFR chunk. The ``tcp-idle-timeout`` will close the connection if + there's no progress on the TCP level. + +.. namedconf:statement:: max-transfer-time-out + :tags: transfer + :short: Specifies the number of minutes after which outbound zone transfers are terminated. + + Outbound zone transfers running longer than this many minutes are + terminated. The default is 120 minutes (2 hours). The maximum value + is 28 days (40320 minutes). + +.. namedconf:statement:: max-transfer-idle-out + :tags: transfer + :short: Specifies the number of minutes after which outbound zone transfers making no progress are terminated. + + Outbound zone transfers making no progress in this many minutes are + terminated. The default is 60 minutes (1 hour). The maximum value + is 28 days (40320 minutes). + +.. namedconf:statement:: notify-rate + :tags: transfer, zone + :short: Specifies the rate at which NOTIFY requests are sent during normal zone maintenance operations. + + This specifies the rate at which NOTIFY requests are sent during normal zone + maintenance operations. (NOTIFY requests due to initial zone loading + are subject to a separate rate limit; see below.) The default is 20 + per second. The lowest possible rate is one per second; when set to + zero, it is silently raised to one. + +.. namedconf:statement:: startup-notify-rate + :tags: transfer, zone + :short: Specifies the rate at which NOTIFY requests are sent when the name server is first starting, or when new zones have been added. + + This is the rate at which NOTIFY requests are sent when the name server + is first starting up, or when zones have been newly added to the + name server. The default is 20 per second. The lowest possible rate is + one per second; when set to zero, it is silently raised to one. + +.. namedconf:statement:: serial-query-rate + :tags: transfer + :short: Defines an upper limit on the number of queries per second issued by the server, when querying the SOA RRs used for zone transfers. + + Secondary servers periodically query primary servers to find out if + zone serial numbers have changed. Each such query uses a minute + amount of the secondary server's network bandwidth. To limit the amount + of bandwidth used, BIND 9 limits the rate at which queries are sent. + The value of the :any:`serial-query-rate` option, an integer, is the + maximum number of queries sent per second. The default is 20 per + second. The lowest possible rate is one per second; when set to zero, + it is silently raised to one. + +.. namedconf:statement:: transfer-format + :tags: transfer + :short: Controls whether multiple records can be packed into a message during zone transfers. + + Zone transfers can be sent using two different formats, + ``one-answer`` and ``many-answers``. The :any:`transfer-format` option + is used on the primary server to determine which format it sends. + ``one-answer`` uses one DNS message per resource record transferred. + ``many-answers`` packs as many resource records as possible into one + message. ``many-answers`` is more efficient; the default is ``many-answers``. + :any:`transfer-format` may be overridden on a per-server basis by using + the :namedconf:ref:`server` block. + +.. namedconf:statement:: transfer-message-size + :tags: transfer + :short: Limits the uncompressed size of DNS messages used in zone transfers over TCP. + + This is an upper bound on the uncompressed size of DNS messages used + in zone transfers over TCP. If a message grows larger than this size, + additional messages are used to complete the zone transfer. + (Note, however, that this is a hint, not a hard limit; if a message + contains a single resource record whose RDATA does not fit within the + size limit, a larger message will be permitted so the record can be + transferred.) + + Valid values are between 512 and 65535 octets; any values outside + that range are adjusted to the nearest value within it. The + default is ``20480``, which was selected to improve message + compression; most DNS messages of this size will compress to less + than 16536 bytes. Larger messages cannot be compressed as + effectively, because 16536 is the largest permissible compression + offset pointer in a DNS message. + + This option is mainly intended for server testing; there is rarely + any benefit in setting a value other than the default. + +.. namedconf:statement:: transfers-in + :tags: transfer + :short: Limits the number of concurrent inbound zone transfers. + + This is the maximum number of inbound zone transfers that can run + concurrently. The default value is ``10``. Increasing + :any:`transfers-in` may speed up the convergence of secondary zones, but it + also may increase the load on the local system. + +.. namedconf:statement:: transfers-out + :tags: transfer + :short: Limits the number of concurrent outbound zone transfers. + + This is the maximum number of outbound zone transfers that can run + concurrently. Zone transfer requests in excess of the limit are + refused. The default value is ``10``. + +.. namedconf:statement:: transfers-per-ns + :tags: transfer + :short: Limits the number of concurrent inbound zone transfers from a remote server. + + This is the maximum number of inbound zone transfers that can concurrently + transfer from a given remote name server. The default value is + ``2``. Increasing :any:`transfers-per-ns` may speed up the convergence + of secondary zones, but it also may increase the load on the remote name + server. :any:`transfers-per-ns` may be overridden on a per-server basis + by using the :any:`transfers` phrase of the :namedconf:ref:`server` statement. + +.. namedconf:statement:: transfer-source + :tags: transfer + :short: Defines which local IPv4 address(es) are bound to TCP connections used to fetch zones transferred inbound by the server. + + :any:`transfer-source` determines which local address is bound to + IPv4 TCP connections used to fetch zones transferred inbound by the + server. It also determines the source IPv4 address, and optionally + the UDP port, used for the refresh queries and forwarded dynamic + updates. If not set, it defaults to a system-controlled value which + is usually the address of the interface "closest to" the remote + end. This address must appear in the remote end's :any:`allow-transfer` + option for the zone being transferred, if one is specified. This + statement sets the :any:`transfer-source` for all zones, but can be + overridden on a per-view or per-zone basis by including a + :any:`transfer-source` statement within the :any:`view` or :any:`zone` block + in the configuration file. + + .. note:: ``port`` configuration is deprecated. A warning will be logged + when this parameter is used. + + .. warning:: Specifying a single port is discouraged, as it removes a layer of + protection against spoofing errors. + + .. warning:: The configured :term:`port` must not be the same as the listening port. + +.. namedconf:statement:: transfer-source-v6 + :tags: transfer + :short: Defines which local IPv6 address(es) are bound to TCP connections used to fetch zones transferred inbound by the server. + + This option is the same as :any:`transfer-source`, except zone transfers + are performed using IPv6. + +.. namedconf:statement:: alt-transfer-source + :tags: deprecated + :short: Defines alternate local IPv4 address(es) to be used by the server for inbound zone transfers, if the address(es) defined by :any:`transfer-source` fail and :any:`use-alt-transfer-source` is enabled. + + This indicates an alternate transfer source if the one listed in :any:`transfer-source` + fails and :any:`use-alt-transfer-source` is set. + + .. note:: To avoid using the alternate transfer source, + set :any:`use-alt-transfer-source` appropriately and + do not depend upon getting an answer back to the first refresh + query. + +.. namedconf:statement:: alt-transfer-source-v6 + :tags: deprecated + :short: Defines alternate local IPv6 address(es) to be used by the server for inbound zone transfers. + + This indicates an alternate transfer source if the one listed in + :any:`transfer-source-v6` fails and :any:`use-alt-transfer-source` is set. + +.. namedconf:statement:: use-alt-transfer-source + :tags: deprecated + :short: Indicates whether :any:`alt-transfer-source` and :any:`alt-transfer-source-v6` can be used. + + This indicates whether the alternate transfer sources should be used. If views are specified, + this defaults to ``no``; otherwise, it defaults to ``yes``. + +.. namedconf:statement:: notify-source + :tags: transfer + :short: Defines the IPv4 address (and optional port) to be used for outgoing ``NOTIFY`` messages. + + :any:`notify-source` determines which local source address, and + optionally UDP port, is used to send NOTIFY messages. This + address must appear in the secondary server's :any:`primaries` zone clause or + in an :any:`allow-notify` clause. This statement sets the + :any:`notify-source` for all zones, but can be overridden on a per-zone + or per-view basis by including a :any:`notify-source` statement within + the :any:`zone` or :any:`view` block in the configuration file. + + .. note:: ``port`` configuration is deprecated. A warning will be logged + when this parameter is used. + + .. warning:: Specifying a single port is discouraged, as it removes a layer of + protection against spoofing errors. + + .. warning:: The configured :term:`port` must not be the same as the listening port. + +.. namedconf:statement:: notify-source-v6 + :tags: transfer + :short: Defines the IPv6 address (and optional port) to be used for outgoing ``NOTIFY`` messages. + + This option acts like :any:`notify-source`, but applies to ``NOTIFY`` messages sent to IPv6 + addresses. + +.. _resource_limits: + +Operating System Resource Limits +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The server's usage of many system resources can be limited. Scaled +values are allowed when specifying resource limits. For example, ``1G`` +can be used instead of ``1073741824`` to specify a limit of one +gigabyte. ``unlimited`` requests unlimited use, or the maximum available +amount. ``default`` uses the limit that was in force when the server was +started. See the description of :term:`size`. + +The following options are deprecated in favor of setting the operating system +resource limits from the operating system and/or process supervisor, should not +be used, and will be rendered non-operational in a future release. + + +.. namedconf:statement:: coresize + :tags: deprecated + :short: Sets the maximum size of a core dump. + + This sets the maximum size of a core dump. The default is ``default``. + +.. namedconf:statement:: datasize + :tags: deprecated + :short: Sets the maximum amount of data memory that can be used by the server. + + This sets the maximum amount of data memory the server may use. The default is + ``default``. This is a hard limit on server memory usage; if the + server attempts to allocate memory in excess of this limit, the + allocation will fail, which may in turn leave the server unable to + perform DNS service. Therefore, this option is rarely useful as a way + to limit the amount of memory used by the server, but it can be + used to raise an operating system data size limit that is too small + by default. To limit the amount of memory used by the + server, use the :any:`max-cache-size` and :any:`recursive-clients` options + instead. + +.. namedconf:statement:: files + :tags: deprecated + :short: Sets the maximum number of files the server may have open concurrently. + + This sets the maximum number of files the server may have open concurrently. + The default is ``unlimited``. + +.. namedconf:statement:: stacksize + :tags: deprecated + :short: Sets the maximum amount of stack memory that can be used by the server. + + This sets the maximum amount of stack memory the server may use. The default is + ``default``. + +.. _server_resource_limits: + +Server Resource Limits +^^^^^^^^^^^^^^^^^^^^^^ + +The following options set limits on the server's resource consumption +that are enforced internally by the server rather than by the operating +system. + +.. namedconf:statement:: max-journal-size + :tags: transfer + :short: Controls the size of journal files. + + This sets a maximum size for each journal file (see :ref:`journal`), + expressed in bytes or, if followed by an + optional unit suffix ('k', 'm', or 'g'), in kilobytes, megabytes, or + gigabytes. When the journal file approaches the specified size, some + of the oldest transactions in the journal are automatically + removed. The largest permitted value is 2 gigabytes. Very small + values are rounded up to 4096 bytes. It is possible to specify ``unlimited``, + which also means 2 gigabytes. If the limit is set to ``default`` or + left unset, the journal is allowed to grow up to twice as large + as the zone. (There is little benefit in storing larger journals.) + + This option may also be set on a per-zone basis. + +.. namedconf:statement:: max-records + :tags: zone, server + :short: Sets the maximum number of records permitted in a zone. + + This sets the maximum number of records permitted in a zone. The default is + zero, which means the maximum is unlimited. + +.. namedconf:statement:: recursive-clients + :tags: query + :short: Specifies the maximum number of concurrent recursive queries the server can perform. + + This sets the maximum number (a "hard quota") of simultaneous recursive lookups + the server performs on behalf of clients. The default is + ``1000``. Because each recursing client uses a fair bit of memory (on + the order of 20 kilobytes), the value of the :any:`recursive-clients` + option may have to be decreased on hosts with limited memory. + + :any:`recursive-clients` defines a "hard quota" limit for pending + recursive clients; when more clients than this are pending, new + incoming requests are not accepted, and for each incoming request + a previous pending request is dropped. + + A "soft quota" is also set. When this lower quota is exceeded, + incoming requests are accepted, but for each one, a pending request + is dropped. If :any:`recursive-clients` is greater than 1000, the + soft quota is set to :any:`recursive-clients` minus 100; otherwise it is + set to 90% of :any:`recursive-clients`. + +.. namedconf:statement:: tcp-clients + :tags: server + :short: Specifies the maximum number of simultaneous client TCP connections accepted by the server. + + This is the maximum number of simultaneous client TCP connections that the + server accepts. The default is ``150``. + +.. namedconf:statement:: clients-per-query + :tags: server + :short: Sets the initial minimum number of simultaneous recursive clients accepted by the server for any given query before the server drops additional clients. + + This sets the initial value (minimum) number of simultaneous recursive clients + for any given query (<qname,qtype,qclass>) that the server accepts before + dropping additional clents. :iscman:`named` attempts to self-tune this + value and changes are logged. The default value is 10. + + The chosen value should reflect how many queries come in for a given name + in the time it takes to resolve that name. + +.. namedconf:statement:: max-clients-per-query + :tags: server + :short: Sets the maximum number of simultaneous recursive clients accepted by the server for any given query before the server drops additional clients. + + This sets the maximum number of simultaneous recursive clients for any + given query (<qname,qtype,qclass>) that the server accepts before + dropping additional clients. + + If the number of queries exceeds :any:`clients-per-query`, :iscman:`named` + assumes that it is dealing with a non-responsive zone and drops additional + queries. If it gets a response after dropping queries, it raises the estimate, + up to a limit of :any:`max-clients-per-query`. The estimate is then lowered + after 20 minutes if it has remained unchanged. + + If :any:`max-clients-per-query` is set to zero, there is no upper bound, other + than that imposed by :any:`recursive-clients`. If :any:`clients-per-query` is + set to zero, :any:`max-clients-per-query` no longer applies and there is no + upper bound, other than that imposed by :any:`recursive-clients`. + +.. namedconf:statement:: fetches-per-zone + :tags: server, query + :short: Sets the maximum number of simultaneous iterative queries allowed to any one domain before the server blocks new queries for data in or beneath that zone. + + This sets the maximum number of simultaneous iterative queries to any one + domain that the server permits before blocking new queries for + data in or beneath that zone. This value should reflect how many + fetches would normally be sent to any one zone in the time it would + take to resolve them. It should be smaller than + :any:`recursive-clients`. + + When many clients simultaneously query for the same name and type, + the clients are all attached to the same fetch, up to the + :any:`max-clients-per-query` limit, and only one iterative query is + sent. However, when clients are simultaneously querying for + *different* names or types, multiple queries are sent and + :any:`max-clients-per-query` is not effective as a limit. + + Optionally, this value may be followed by the keyword ``drop`` or + ``fail``, indicating whether queries which exceed the fetch quota for + a zone are dropped with no response, or answered with SERVFAIL. + The default is ``drop``. + + If :any:`fetches-per-zone` is set to zero, there is no limit on the + number of fetches per query and no queries are dropped. The + default is zero. + + The current list of active fetches can be dumped by running + :option:`rndc recursing`. The list includes the number of active fetches + for each domain and the number of queries that have been passed + (allowed) or dropped (spilled) as a result of the :any:`fetches-per-zone` + limit. (Note: these counters are not cumulative over time; + whenever the number of active fetches for a domain drops to zero, + the counter for that domain is deleted, and the next time a fetch + is sent to that domain, it is recreated with the counters set + to zero.) + +.. namedconf:statement:: fetches-per-server + :tags: server, query + :short: Sets the maximum number of simultaneous iterative queries allowed to be sent by a server to an upstream name server before the server blocks additional queries. + + This sets the maximum number of simultaneous iterative queries that the server + allows to be sent to a single upstream name server before + blocking additional queries. This value should reflect how many + fetches would normally be sent to any one server in the time it would + take to resolve them. It should be smaller than + :any:`recursive-clients`. + + Optionally, this value may be followed by the keyword ``drop`` or + ``fail``, indicating whether queries are dropped with no + response or answered with SERVFAIL, when all of the servers + authoritative for a zone are found to have exceeded the per-server + quota. The default is ``fail``. + + If :any:`fetches-per-server` is set to zero, there is no limit on + the number of fetches per query and no queries are dropped. The + default is zero. + + The :any:`fetches-per-server` quota is dynamically adjusted in response + to detected congestion. As queries are sent to a server and either are + answered or time out, an exponentially weighted moving average + is calculated of the ratio of timeouts to responses. If the current + average timeout ratio rises above a "high" threshold, then + :any:`fetches-per-server` is reduced for that server. If the timeout + ratio drops below a "low" threshold, then :any:`fetches-per-server` is + increased. The :any:`fetch-quota-params` options can be used to adjust + the parameters for this calculation. + +.. namedconf:statement:: fetch-quota-params + :tags: server, query + :short: Sets the parameters for dynamic resizing of the :any:`fetches-per-server` quota in response to detected congestion. + + This sets the parameters to use for dynamic resizing of the + :any:`fetches-per-server` quota in response to detected congestion. + + The first argument is an integer value indicating how frequently to + recalculate the moving average of the ratio of timeouts to responses + for each server. The default is 100, meaning that BIND recalculates the + average ratio after every 100 queries have either been answered or + timed out. + + The remaining three arguments represent the "low" threshold + (defaulting to a timeout ratio of 0.1), the "high" threshold + (defaulting to a timeout ratio of 0.3), and the discount rate for the + moving average (defaulting to 0.7). A higher discount rate causes + recent events to weigh more heavily when calculating the moving + average; a lower discount rate causes past events to weigh more + heavily, smoothing out short-term blips in the timeout ratio. These + arguments are all fixed-point numbers with precision of 1/100; at + most two places after the decimal point are significant. + +.. namedconf:statement:: reserved-sockets + :tags: deprecated + :short: Deprecated. + + This option is deprecated and no longer has any effect. + +.. namedconf:statement:: max-cache-size + :tags: server + :short: Sets the maximum amount of memory to use for an individual cache database and its associated metadata. + + This sets the maximum amount of memory to use for an individual cache + database and its associated metadata, in bytes or percentage of total + physical memory. By default, each view has its own separate cache, + which means the total amount of memory required for cache data is the + sum of the cache database sizes for all views (unless the + :any:`attach-cache` option is used). + + When the amount of data in a cache database reaches the configured + limit, :iscman:`named` starts purging non-expired records (following an + LRU-based strategy). + + The default size limit for each individual cache is: + + - 90% of physical memory for views with :any:`recursion` set to + ``yes`` (the default), or + + - 2 MB for views with :any:`recursion` set to ``no``. + + Any positive value smaller than 2 MB is ignored and reset to 2 MB. + The keyword ``unlimited``, or the value ``0``, places no limit on the + cache size; records are then purged from the cache only when they + expire (according to their TTLs). + + .. note:: + + For configurations which define multiple views with separate + caches and recursion enabled, it is recommended to set + :any:`max-cache-size` appropriately for each view, as using the + default value of that option (90% of physical memory for each + individual cache) may lead to memory exhaustion over time. + + .. note:: + + :any:`max-cache-size` does not work reliably for the maximum + amount of memory of 100 MB or lower. + + Upon startup and reconfiguration, caches with a limited size + preallocate a small amount of memory (less than 1% of + :any:`max-cache-size` for a given view). This preallocation serves as an + optimization to eliminate extra latency introduced by resizing + internal cache structures. + + On systems where detection of the amount of physical memory is not + supported, percentage-based values fall back to ``unlimited``. Note + that the amount of physical memory available is only detected on + startup, so :iscman:`named` does not adjust the cache size limits if the + amount of physical memory is changed at runtime. + +.. namedconf:statement:: tcp-listen-queue + :tags: server + :short: Sets the listen-queue depth. + + This sets the listen-queue depth. The default and minimum is 10. If the kernel + supports the accept filter "dataready", this also controls how many + TCP connections are queued in kernel space waiting for some + data before being passed to accept. Non-zero values less than 10 are + silently raised. A value of 0 may also be used; on most platforms + this sets the listen-queue length to a system-defined default value. + +.. namedconf:statement:: tcp-initial-timeout + :tags: server, query + :short: Sets the amount of time (in milliseconds) that the server waits on a new TCP connection for the first message from the client. + + This sets the amount of time (in units of 100 milliseconds) that the server waits on + a new TCP connection for the first message from the client. The + default is 300 (30 seconds), the minimum is 25 (2.5 seconds), and the + maximum is 1200 (two minutes). Values above the maximum or below the + minimum are adjusted with a logged warning. (Note: this value + must be greater than the expected round-trip delay time; otherwise, no + client will ever have enough time to submit a message.) This value + can be updated at runtime by using :option:`rndc tcp-timeouts`. + +.. namedconf:statement:: tcp-idle-timeout + :tags: query + :short: Sets the amount of time (in milliseconds) that the server waits on an idle TCP connection before closing it, if the EDNS TCP keepalive option is not in use. + + This sets the amount of time (in units of 100 milliseconds) that the server waits on + an idle TCP connection before closing it, when the client is not using + the EDNS TCP keepalive option. The default is 300 (30 seconds), the + maximum is 1200 (two minutes), and the minimum is 1 (one-tenth of a + second). Values above the maximum or below the minimum are + adjusted with a logged warning. See :any:`tcp-keepalive-timeout` for + clients using the EDNS TCP keepalive option. This value can be + updated at runtime by using :option:`rndc tcp-timeouts`. + +.. namedconf:statement:: tcp-keepalive-timeout + :tags: query + :short: Sets the amount of time (in milliseconds) that the server waits on an idle TCP connection before closing it, if the EDNS TCP keepalive option is in use. + + This sets the amount of time (in units of 100 milliseconds) that the server waits on + an idle TCP connection before closing it, when the client is using the + EDNS TCP keepalive option. The default is 300 (30 seconds), the + maximum is 65535 (about 1.8 hours), and the minimum is 1 (one-tenth + of a second). Values above the maximum or below the minimum are + adjusted with a logged warning. This value may be greater than + :any:`tcp-idle-timeout` because clients using the EDNS TCP keepalive + option are expected to use TCP connections for more than one message. + This value can be updated at runtime by using :option:`rndc tcp-timeouts`. + +.. namedconf:statement:: tcp-advertised-timeout + :tags: query + :short: Sets the timeout value (in milliseconds) that the server sends in responses containing the EDNS TCP keepalive option. + + This sets the timeout value (in units of 100 milliseconds) that the server sends + in responses containing the EDNS TCP keepalive option, which informs a + client of the amount of time it may keep the session open. The + default is 300 (30 seconds), the maximum is 65535 (about 1.8 hours), + and the minimum is 0, which signals that the clients must close TCP + connections immediately. Ordinarily this should be set to the same + value as :any:`tcp-keepalive-timeout`. This value can be updated at + runtime by using :option:`rndc tcp-timeouts`. + +.. namedconf:statement:: update-quota + :tags: server + :short: Specifies the maximum number of concurrent DNS UPDATE messages that can be processed by the server. + + This is the maximum number of simultaneous DNS UPDATE messages that + the server will accept for updating local authoritiative zones or + forwarding to a primary server. The default is ``100``. + +.. _intervals: + +Periodic Task Intervals +^^^^^^^^^^^^^^^^^^^^^^^ + +.. namedconf:statement:: heartbeat-interval + :tags: deprecated + :short: Sets the interval at which the server performs zone maintenance tasks for all zones marked as :any:`dialup`. + + The server performs zone maintenance tasks for all zones marked + as :any:`dialup` whenever this interval expires. The default is 60 + minutes. Reasonable values are up to 1 day (1440 minutes). The + maximum value is 28 days (40320 minutes). If set to 0, no zone + maintenance for these zones occurs. + + This option is deprecated and will be removed in a future release. + +.. namedconf:statement:: interface-interval + :tags: server + :short: Sets the interval at which the server scans the network interface list. + + The server scans the network interface list every :any:`interface-interval` + minutes. The default is 60 minutes; the maximum value is 28 days (40320 + minutes). If set to 0, interface scanning only occurs when the configuration + file is loaded, or when :any:`automatic-interface-scan` is enabled and supported + by the operating system. After the scan, the server begins listening for + queries on any newly discovered interfaces (provided they are allowed by the + :any:`listen-on` configuration), and stops listening on interfaces that have + gone away. For convenience, TTL-style time-unit suffixes may be used to + specify the value. It also accepts ISO 8601 duration formats. + +The :any:`sortlist` Statement +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The response to a DNS query may consist of multiple resource records +(RRs) forming a resource record set (RRset). The name server +normally returns the RRs within the RRset in an indeterminate order (but +see the :any:`rrset-order` statement in :ref:`rrset_ordering`). The client resolver code should +rearrange the RRs as appropriate: that is, using any addresses on the +local net in preference to other addresses. However, not all resolvers +can do this or are correctly configured. When a client is using a local +server, the sorting can be performed in the server, based on the +client's address. This only requires configuring the name servers, not +all the clients. + +.. namedconf:statement:: sortlist + :tags: query + :short: Controls the ordering of RRs returned to the client, based on the client's IP address. + + The :any:`sortlist` statement (see below) takes an :term:`address_match_list` and + interprets it in a special way. Each top-level statement in the :any:`sortlist` + must itself be an explicit :term:`address_match_list` with one or two elements. The + first element (which may be an IP address, an IP prefix, an ACL name, or a nested + :term:`address_match_list`) of each top-level list is checked against the source + address of the query until a match is found. When the addresses in the first + element overlap, the first rule to match is selected. + + Once the source address of the query has been matched, if the top-level + statement contains only one element, the actual primitive element that + matched the source address is used to select the address in the response + to move to the beginning of the response. If the statement is a list of + two elements, then the second element is interpreted as a topology + preference list. Each top-level element is assigned a distance, and the + address in the response with the minimum distance is moved to the + beginning of the response. + + In the following example, any queries received from any of the addresses + of the host itself get responses preferring addresses on any of the + locally connected networks. Next most preferred are addresses on the + 192.168.1/24 network, and after that either the 192.168.2/24 or + 192.168.3/24 network, with no preference shown between these two + networks. Queries received from a host on the 192.168.1/24 network + prefer other addresses on that network to the 192.168.2/24 and + 192.168.3/24 networks. Queries received from a host on the 192.168.4/24 + or the 192.168.5/24 network only prefer other addresses on their + directly connected networks. + +:: + + sortlist { + // IF the local host + // THEN first fit on the following nets + { localhost; + { localnets; + 192.168.1/24; + { 192.168.2/24; 192.168.3/24; }; }; }; + // IF on class C 192.168.1 THEN use .1, or .2 or .3 + { 192.168.1/24; + { 192.168.1/24; + { 192.168.2/24; 192.168.3/24; }; }; }; + // IF on class C 192.168.2 THEN use .2, or .1 or .3 + { 192.168.2/24; + { 192.168.2/24; + { 192.168.1/24; 192.168.3/24; }; }; }; + // IF on class C 192.168.3 THEN use .3, or .1 or .2 + { 192.168.3/24; + { 192.168.3/24; + { 192.168.1/24; 192.168.2/24; }; }; }; + // IF .4 or .5 THEN prefer that net + { { 192.168.4/24; 192.168.5/24; }; + }; + }; + +The following example illlustrates reasonable behavior for the local host +and hosts on directly connected networks. Responses sent to queries from the +local host favor any of the directly connected networks. Responses +sent to queries from any other hosts on a directly connected network +prefer addresses on that same network. Responses to other queries +are not sorted. + +:: + + sortlist { + { localhost; localnets; }; + { localnets; }; + }; + +.. _rrset_ordering: + +RRset Ordering +^^^^^^^^^^^^^^ + +.. note:: + + While alternating the order of records in a DNS response between + subsequent queries is a known load distribution technique, certain + caveats apply (mostly stemming from caching) which usually make it a + suboptimal choice for load balancing purposes when used on its own. + +.. namedconf:statement:: rrset-order + :tags: query + :short: Defines the order in which equal RRs (RRsets) are returned. + + The :any:`rrset-order` statement permits configuration of the ordering of + the records in a multiple-record response. See also: + :any:`sortlist`. + + Each rule in an :any:`rrset-order` statement is defined as follows: + + :: + + [class <class_name>] [type <type_name>] [name "<domain_name>"] order <ordering> + + The default qualifiers for each rule are: + + - If no ``class`` is specified, the default is ``ANY``. + - If no :any:`type` is specified, the default is ``ANY``. + - If no ``name`` is specified, the default is ``*`` (asterisk). + + :term:`<domain_name> <domain_name>` only matches the name itself, not any of its + subdomains. To make a rule match all subdomains of a given name, a + wildcard name (``*.<domain_name>``) must be used. Note that + ``*.<domain_name>`` does *not* match ``<domain_name>`` itself; to + specify RRset ordering for a name and all of its subdomains, two + separate rules must be defined: one for ``<domain_name>`` and one for + ``*.<domain_name>``. + + The legal values for ``<ordering>`` are: + + ``fixed`` + Records are returned in the order they are defined in the zone file. + + .. note:: + + The ``fixed`` option is only available if BIND is configured with + ``--enable-fixed-rrset`` at compile time. + + ``random`` + Records are returned in a random order. + + ``cyclic`` + Records are returned in a cyclic round-robin order, rotating by one + record per query. + + ``none`` + Records are returned in the order they were retrieved from the + database. This order is indeterminate, but remains consistent as + long as the database is not modified. + + The default RRset order used depends on whether any :any:`rrset-order` + statements are present in the configuration file used by :iscman:`named`: + + - If no :any:`rrset-order` statement is present in the configuration + file, the implicit default is to return all records in ``random`` + order. + + - If any :any:`rrset-order` statements are present in the configuration + file, but no ordering rule specified in these statements matches a + given RRset, the default order for that RRset is ``none``. + + Note that if multiple :any:`rrset-order` statements are present in the + configuration file (at both the :namedconf:ref:`options` and :any:`view` levels), they + are *not* combined; instead, the more-specific one (:any:`view`) replaces + the less-specific one (:namedconf:ref:`options`). + + If multiple rules within a single :any:`rrset-order` statement match a + given RRset, the first matching rule is applied. + + Example: + + :: + + rrset-order { + type A name "foo.isc.org" order random; + type AAAA name "foo.isc.org" order cyclic; + name "bar.isc.org" order fixed; + name "*.bar.isc.org" order random; + name "*.baz.isc.org" order cyclic; + }; + + With the above configuration, the following RRset ordering is used: + + =================== ======== =========== + QNAME QTYPE RRset Order + =================== ======== =========== + ``foo.isc.org`` ``A`` ``random`` + ``foo.isc.org`` ``AAAA`` ``cyclic`` + ``foo.isc.org`` ``TXT`` ``none`` + ``sub.foo.isc.org`` all ``none`` + ``bar.isc.org`` all ``fixed`` + ``sub.bar.isc.org`` all ``random`` + ``baz.isc.org`` all ``none`` + ``sub.baz.isc.org`` all ``cyclic`` + =================== ======== =========== + +.. _tuning: + +Tuning +^^^^^^ + +.. namedconf:statement:: lame-ttl + :tags: server + :short: Sets the resolver's lame cache. + + This is always set to 0. More information is available in the + `security advisory for CVE-2021-25219 + <https://kb.isc.org/docs/cve-2021-25219>`_. + +.. namedconf:statement:: servfail-ttl + :tags: server + :short: Sets the length of time (in seconds) that a SERVFAIL response is cached. + + This sets the number of seconds to cache a SERVFAIL response due to DNSSEC + validation failure or other general server failure. If set to ``0``, + SERVFAIL caching is disabled. The SERVFAIL cache is not consulted if + a query has the CD (Checking Disabled) bit set; this allows a query + that failed due to DNSSEC validation to be retried without waiting + for the SERVFAIL TTL to expire. + + The maximum value is ``30`` seconds; any higher value is + silently reduced. The default is ``1`` second. + +.. namedconf:statement:: min-ncache-ttl + :tags: server + :short: Specifies the minimum retention time (in seconds) for storage of negative answers in the server's cache. + + To reduce network traffic and increase performance, the server stores + negative answers. :any:`min-ncache-ttl` is used to set a minimum + retention time for these answers in the server, in seconds. For + convenience, TTL-style time-unit suffixes may be used to specify the + value. It also accepts ISO 8601 duration formats. + + The default :any:`min-ncache-ttl` is ``0`` seconds. :any:`min-ncache-ttl` cannot + exceed 90 seconds and is truncated to 90 seconds if set to a greater + value. + +.. namedconf:statement:: min-cache-ttl + :tags: server + :short: Specifies the minimum time (in seconds) that the server caches ordinary (positive) answers. + + This sets the minimum time for which the server caches ordinary (positive) + answers, in seconds. For convenience, TTL-style time-unit suffixes may be used + to specify the value. It also accepts ISO 8601 duration formats. + + The default :any:`min-cache-ttl` is ``0`` seconds. :any:`min-cache-ttl` cannot + exceed 90 seconds and is truncated to 90 seconds if set to a greater + value. + +.. namedconf:statement:: max-ncache-ttl + :tags: server + :short: Specifies the maximum retention time (in seconds) for storage of negative answers in the server's cache. + + To reduce network traffic and increase performance, the server stores + negative answers. :any:`max-ncache-ttl` is used to set a maximum retention time + for these answers in the server, in seconds. For convenience, TTL-style + time-unit suffixes may be used to specify the value. It also accepts ISO 8601 + duration formats. + + The default :any:`max-ncache-ttl` is 10800 seconds (3 hours). :any:`max-ncache-ttl` + cannot exceed 7 days and is silently truncated to 7 days if set to a + greater value. + +.. namedconf:statement:: max-cache-ttl + :tags: server + :short: Specifies the maximum time (in seconds) that the server caches ordinary (positive) answers. + + This sets the maximum time for which the server caches ordinary (positive) + answers, in seconds. For convenience, TTL-style time-unit suffixes may be used + to specify the value. It also accepts ISO 8601 duration formats. + + The default :any:`max-cache-ttl` is 604800 (one week). A value of zero may cause + all queries to return SERVFAIL, because of lost caches of intermediate RRsets + (such as NS and glue AAAA/A records) in the resolution process. + +.. namedconf:statement:: max-stale-ttl + :tags: server + :short: Specifies the maximum time that the server retains records past their normal expiry, to return them as stale records. + + If retaining stale RRsets in cache is enabled, and returning of stale cached + answers is also enabled, :any:`max-stale-ttl` sets the maximum time for which + the server retains records past their normal expiry to return them as stale + records, when the servers for those records are not reachable. The default + is 1 day. The minimum allowed is 1 second; a value of 0 is updated silently + to 1 second. + + For stale answers to be returned, the retaining of them in cache must be + enabled via the configuration option :any:`stale-cache-enable`, and returning + cached answers must be enabled, either in the configuration file using the + :any:`stale-answer-enable` option or by calling :option:`rndc serve-stale on <rndc serve-stale>`. + + When :any:`stale-cache-enable` is set to ``no``, setting the :any:`max-stale-ttl` + has no effect, the value of :any:`max-cache-ttl` will be ``0`` in such case. + +.. namedconf:statement:: resolver-nonbackoff-tries + :tags: server + :short: Specifies the number of retries before exponential backoff. + + This specifies how many retries occur before exponential backoff kicks in. The + default is ``3``. + +.. namedconf:statement:: resolver-retry-interval + :tags: server, query + :short: Sets the base retry interval (in milliseconds). + + This sets the base retry interval in milliseconds. The default is ``800``. + +.. namedconf:statement:: sig-validity-interval + :tags: dnssec + :short: Specifies the maximum number of days that RRSIGs generated by :iscman:`named` are valid. + + This specifies the upper bound of the number of days that RRSIGs + generated by :iscman:`named` are valid; the default is ``30`` days, + with a maximum of 3660 days (10 years). The optional second value + specifies the minimum bound on those RRSIGs and also determines + how long before expiry :iscman:`named` starts regenerating those RRSIGs. + The default value for the lower bound is 1/4 of the upper bound; + it is expressed in days if the upper bound is greater than 7, + and hours if it is less than or equal to 7 days. + + When new RRSIGs are generated, the length of time is randomly + chosen between these two limits, to spread out the re-signing + load. When RRSIGs are re-generated, the upper bound is used, with + a small amount of jitter added. New RRSIGs are generated by a + number of processes, including the processing of UPDATE requests + (ref:`dynamic_update`), the addition and removal of records via + in-line signing, and the initial signing of a zone. + + The signature inception time is unconditionally set to one hour + before the current time, to allow for a limited amount of clock skew. + + The :any:`sig-validity-interval` can be overridden for DNSKEY records by + setting :any:`dnskey-sig-validity`. + + The :any:`sig-validity-interval` should be at least several multiples + of the SOA expire interval, to allow for reasonable interaction + between the various timer and expiry dates. + +.. namedconf:statement:: dnskey-sig-validity + :tags: dnssec + :short: Specifies the number of days in the future when automatically generated DNSSEC signatures expire. + + This specifies the number of days into the future when DNSSEC signatures + that are automatically generated for DNSKEY RRsets as a result of + dynamic updates (:ref:`dynamic_update`) will expire. + If set to a non-zero value, this overrides the value set by + :any:`sig-validity-interval`. The default is zero, meaning + :any:`sig-validity-interval` is used. The maximum value is 3660 days (10 + years), and higher values are rejected. + +.. namedconf:statement:: sig-signing-nodes + :tags: dnssec + :short: Specifies the maximum number of nodes to be examined in each quantum, when signing a zone with a new DNSKEY. + + This specifies the maximum number of nodes to be examined in each quantum, + when signing a zone with a new DNSKEY. The default is ``100``. + +.. namedconf:statement:: sig-signing-signatures + :tags: dnssec + :short: Specifies the threshold for the number of signatures that terminates processing a quantum, when signing a zone with a new DNSKEY. + + This specifies a threshold number of signatures that terminates + processing a quantum, when signing a zone with a new DNSKEY. The + default is ``10``. + +.. namedconf:statement:: sig-signing-type + :tags: dnssec + :short: Specifies a private RDATA type to use when generating signing-state records. + + This specifies a private RDATA type to be used when generating signing-state + records. The default is ``65534``. + + This parameter may be removed in a future version, + once there is a standard type. + + Signing-state records are used internally by :iscman:`named` to track + the current state of a zone-signing process, i.e., whether it is + still active or has been completed. The records can be inspected + using the command :option:`rndc signing -list zone <rndc signing>`. Once :iscman:`named` has + finished signing a zone with a particular key, the signing-state + record associated with that key can be removed from the zone by + running :option:`rndc signing -clear keyid/algorithm zone <rndc signing>`. To clear all of + the completed signing-state records for a zone, use + :option:`rndc signing -clear all zone <rndc signing>`. + +.. namedconf:statement:: min-refresh-time + :tags: transfer + :short: Limits the zone refresh interval to no more often than the specified value, in seconds. + + This option controls the server's behavior on refreshing a zone + (querying for SOA changes). Usually, the SOA refresh values for + the zone are used; however, these values are set by the primary, giving + secondary server administrators little control over their contents. + + This option allows the administrator to set a minimum + refresh time in seconds per-zone, per-view, or globally. + This option is valid for secondary and stub zones, and clamps the SOA + refresh time to the specified value. + + The default is 300 seconds. + +.. namedconf:statement:: max-refresh-time + :tags: transfer + :short: Limits the zone refresh interval to no less often than the specified value, in seconds. + + This option controls the server's behavior on refreshing a zone + (querying for SOA changes). Usually, the SOA refresh values for + the zone are used; however, these values are set by the primary, giving + secondary server administrators little control over their contents. + + This option allows the administrator to set a maximum + refresh time in seconds per-zone, per-view, or globally. + This option is valid for secondary and stub zones, and clamps the SOA + refresh time to the specified value. + + The default is 2419200 seconds (4 weeks). + +.. namedconf:statement:: min-retry-time + :tags: transfer + :short: Limits the zone refresh retry interval to no more often than the specified value, in seconds. + + This option controls the server's behavior on retrying failed + zone transfers. Usually, the SOA retry values for the zone are + used; however, these values are set by the primary, giving + secondary server administrators little control over their contents. + + This option allows the administrator to set a minimum + retry time in seconds per-zone, per-view, or globally. + This option is valid for secondary and stub zones, and clamps the SOA + retry time to the specified value. + + The default is 500 seconds. + +.. namedconf:statement:: max-retry-time + :tags: transfer + :short: Limits the zone refresh retry interval to no less often than the specified value, in seconds. + + This option controls the server's behavior on retrying failed + zone transfers. Usually, the SOA retry values for the zone are + used; however, these values are set by the primary, giving + secondary server administrators little control over their contents. + + This option allows the administrator to set a maximum + retry time in seconds per-zone, per-view, or globally. + This option is valid for secondary and stub zones, and clamps the SOA + retry time to the specified value. + + The default is 1209600 seconds (2 weeks). + +.. namedconf:statement:: edns-udp-size + :tags: query + :short: Sets the maximum advertised EDNS UDP buffer size to control the size of packets received from authoritative servers in response to recursive queries. + + This sets the maximum advertised EDNS UDP buffer size, in bytes, to control + the size of packets received from authoritative servers in response + to recursive queries. Valid values are 512 to 4096; values outside + this range are silently adjusted to the nearest value within it. + The default value is 1232. + + The usual reason for setting :any:`edns-udp-size` to a non-default value + is to get UDP answers to pass through broken firewalls that block + fragmented packets and/or block UDP DNS packets that are greater than + 512 bytes. + + When :iscman:`named` first queries a remote server, it advertises a UDP + buffer size of 1232. + + Query timeouts observed for any given server affect the buffer size + advertised in queries sent to that server. Depending on observed packet + dropping patterns, the query is retried over TCP. Per-server EDNS statistics + are only retained in memory for the lifetime of a given server's ADB entry. + + According to the measurements done by multiple parties the default value + should not be causing the fragmentation as most of the Internet "core" is able to + cope with IP message sizes between 1400-1500 bytes, the 1232 size was picked + as a conservative minimal number that could be changed by the DNS operator to + a estimated path MTU minus the estimated header space. In practice, the + smallest MTU witnessed in the operational DNS community is 1500 octets, the + Ethernet maximum payload size, so a a useful default for maximum DNS/UDP + payload size on **reliable** networks would be 1432. + + Any server-specific :any:`edns-udp-size` setting has precedence over all + the above rules, i.e. configures a static value for a given + :namedconf:ref:`server` block. + +.. namedconf:statement:: max-udp-size + :tags: query + :short: Sets the maximum EDNS UDP message size sent by :iscman:`named`. + + This sets the maximum EDNS UDP message size that :iscman:`named` sends, in bytes. + Valid values are 512 to 4096; values outside this range are + silently adjusted to the nearest value within it. The default value + is 1232. + + This value applies to responses sent by a server; to set the + advertised buffer size in queries, see :any:`edns-udp-size`. + + The usual reason for setting :any:`max-udp-size` to a non-default value + is to allow UDP answers to pass through broken firewalls that block + fragmented packets and/or block UDP packets that are greater than 512 + bytes. This is independent of the advertised receive buffer + (:any:`edns-udp-size`). + + Setting this to a low value encourages additional TCP traffic to + the name server. + +.. namedconf:statement:: masterfile-format + :tags: zone, server + :short: Specifies the file format of zone files. + + This specifies the file format of zone files (see :ref:`zonefile_format` + for details). The default value is ``text``, which is the standard + textual representation, except for secondary zones, in which the default + value is ``raw``. Files in formats other than ``text`` are typically + expected to be generated by the :iscman:`named-compilezone` tool, or dumped by + :iscman:`named`. + + Note that when a zone file in a format other than ``text`` is loaded, + :iscman:`named` may omit some of the checks which are performed for a file in + ``text`` format. For example, :any:`check-names` only applies when loading + zones in ``text`` format. Zone files in ``raw`` format should be generated + with the same check level as that specified in the :iscman:`named` + configuration file. + + When configured in :namedconf:ref:`options`, this statement sets the + :any:`masterfile-format` for all zones, but it can be overridden on a + per-zone or per-view basis by including a :any:`masterfile-format` + statement within the :any:`zone` or :any:`view` block in the configuration + file. + +.. namedconf:statement:: masterfile-style + :tags: server + :short: Specifies the format of zone files during a dump, when the :any:`masterfile-format` is ``text``. + + This specifies the formatting of zone files during dump, when the + :any:`masterfile-format` is ``text``. This option is ignored with any + other :any:`masterfile-format`. + + When set to ``relative``, records are printed in a multi-line format, + with owner names expressed relative to a shared origin. When set to + ``full``, records are printed in a single-line format with absolute + owner names. The ``full`` format is most suitable when a zone file + needs to be processed automatically by a script. The ``relative`` + format is more human-readable, and is thus suitable when a zone is to + be edited by hand. The default is ``relative``. + +.. namedconf:statement:: max-recursion-depth + :tags: server + :short: Sets the maximum number of levels of recursion permitted at any one time while servicing a recursive query. + + This sets the maximum number of levels of recursion that are permitted at + any one time while servicing a recursive query. Resolving a name may + require looking up a name server address, which in turn requires + resolving another name, etc.; if the number of recursions exceeds + this value, the recursive query is terminated and returns SERVFAIL. + The default is 7. + +.. namedconf:statement:: max-recursion-queries + :tags: server, query + :short: Sets the maximum number of iterative queries while servicing a recursive query. + + This sets the maximum number of iterative queries that may be sent while + servicing a recursive query. If more queries are sent, the recursive + query is terminated and returns SERVFAIL. The default is 100. + +.. namedconf:statement:: notify-delay + :tags: transfer, zone + :short: Sets the delay (in seconds) between sending sets of NOTIFY messages for a zone. + + This sets the delay, in seconds, between sending sets of NOTIFY messages + for a zone. Whenever a NOTIFY message is sent for a zone, a timer will + be set for this duration. If the zone is updated again before the timer + expires, the NOTIFY for that update will be postponed. The default is 5 + seconds. + + The overall rate at which NOTIFY messages are sent for all zones is + controlled by :any:`notify-rate`. + +.. namedconf:statement:: max-rsa-exponent-size + :tags: dnssec, query + :short: Sets the maximum RSA exponent size (in bits) when validating. + + This sets the maximum RSA exponent size, in bits, that is accepted when + validating. Valid values are 35 to 4096 bits. The default, zero, is + also accepted and is equivalent to 4096. + +.. namedconf:statement:: prefetch + :tags: query + :short: Specifies the "trigger" time-to-live (TTL) value at which prefetch of the current query takes place. + + When a query is received for cached data which is to expire shortly, + :iscman:`named` can refresh the data from the authoritative server + immediately, ensuring that the cache always has an answer available. + + :any:`prefetch` specifies the "trigger" TTL value at which prefetch + of the current query takes place; when a cache record with a + lower or equal TTL value is encountered during query processing, it is + refreshed. Valid trigger TTL values are 1 to 10 seconds. Values + larger than 10 seconds are silently reduced to 10. Setting a + trigger TTL to zero causes prefetch to be disabled. The default + trigger TTL is ``2``. + + An optional second argument specifies the "eligibility" TTL: the + smallest *original* TTL value that is accepted for a record to + be eligible for prefetching. The eligibility TTL must be at least six + seconds longer than the trigger TTL; if not, :iscman:`named` + silently adjusts it upward. The default eligibility TTL is ``9``. + +.. namedconf:statement:: v6-bias + :tags: server, query + :short: Indicates the number of milliseconds of preference to give to IPv6 name servers. + + When determining the next name server to try, this indicates by how many + milliseconds to prefer IPv6 name servers. The default is ``50`` + milliseconds. + +.. namedconf:statement:: tcp-receive-buffer + :tags: server + :short: Sets the operating system's receive buffer size for TCP sockets. + +.. namedconf:statement:: udp-receive-buffer + :tags: server + :short: Sets the operating system's receive buffer size for UDP sockets. + + These options control the operating system's receive buffer sizes + (``SO_RCVBUF``) for TCP and UDP sockets, respectively. Buffering at + the operating system level can prevent packet drops during brief load + spikes, but if the buffer size is set too high, a running server + could get clogged with outstanding queries that have already timed + out. The default is ``0``, which means the operating system's default + value should be used. The minimum configurable value is ``4096``; any + nonzero value lower than that is silently raised. The maximum value + is determined by the kernel, and values exceeding the maximum are + silently reduced. + +.. namedconf:statement:: tcp-send-buffer + :tags: server + :short: Sets the operating system's send buffer size for TCP sockets. + +.. namedconf:statement:: udp-send-buffer + :tags: server + :short: Sets the operating system's send buffer size for UDP sockets. + + These options control the operating system's send buffer sizes + (``SO_SNDBUF``) for TCP and UDP sockets, respectively. Buffering at + the operating system level can prevent packet drops during brief load + spikes, but if the buffer size is set too high, a running server + could get clogged with outstanding queries that have already timed + out. The default is ``0``, which means the operating system's default + value should be used. The minimum configurable value is ``4096``; any + nonzero value lower than that is silently raised. The maximum value + is determined by the kernel, and values exceeding the maximum are + silently reduced. + +.. _builtin: + +Built-in Server Information Zones +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The server provides some helpful diagnostic information through a number +of built-in zones under the pseudo-top-level-domain ``bind`` in the +``CHAOS`` class. These zones are part of a built-in view +(see :any:`view`) of class ``CHAOS``, which is +separate from the default view of class ``IN``. Most global +configuration options (:any:`allow-query`, etc.) apply to this view, +but some are locally overridden: :namedconf:ref:`notify`, :any:`recursion`, and +:any:`allow-new-zones` are always set to ``no``, and :any:`rate-limit` is set +to allow three responses per second. + +To disable these zones, use the options below or hide the +built-in ``CHAOS`` view by defining an explicit view of class ``CHAOS`` +that matches all clients. + +.. namedconf:statement:: version + :tags: server + :short: Specifies the version number of the server to return in response to a ``version.bind`` query. + + This is the version the server should report via a query of the name + ``version.bind`` with type ``TXT`` and class ``CHAOS``. The default is + the real version number of this server. Specifying ``version none`` + disables processing of the queries. + + Setting :any:`version` to any value (including ``none``) also disables + queries for ``authors.bind TXT CH``. + +.. namedconf:statement:: hostname + :tags: server + :short: Specifies the hostname of the server to return in response to a ``hostname.bind`` query. + + This is the hostname the server should report via a query of the name + ``hostname.bind`` with type ``TXT`` and class ``CHAOS``. This defaults + to the hostname of the machine hosting the name server, as found by + the ``gethostname()`` function. The primary purpose of such queries is to + identify which of a group of anycast servers is actually answering + the queries. Specifying ``hostname none;`` disables processing of + the queries. + +.. namedconf:statement:: server-id + :tags: server + :short: Specifies the ID of the server to return in response to a ``ID.SERVER`` query. + + This is the ID the server should report when receiving a Name Server + Identifier (NSID) query, or a query of the name ``ID.SERVER`` with + type ``TXT`` and class ``CHAOS``. The primary purpose of such queries is + to identify which of a group of anycast servers is actually answering + the queries. Specifying ``server-id none;`` disables processing of + the queries. Specifying ``server-id hostname;`` causes :iscman:`named` + to use the hostname as found by the ``gethostname()`` function. The + default :any:`server-id` is ``none``. + +.. _empty: + +Built-in Empty Zones +^^^^^^^^^^^^^^^^^^^^ + +The :iscman:`named` server has some built-in empty zones, for SOA and NS records +only. These are for zones that should normally be answered locally and for +which queries should not be sent to the Internet's root servers. The +official servers that cover these namespaces return NXDOMAIN responses +to these queries. In particular, these cover the reverse namespaces for +addresses from :rfc:`1918`, :rfc:`4193`, :rfc:`5737`, and :rfc:`6598`. They also +include the reverse namespace for the IPv6 local address (locally assigned), +IPv6 link local addresses, the IPv6 loopback address, and the IPv6 +unknown address. + +The server attempts to determine if a built-in zone already exists +or is active (covered by a forward-only forwarding declaration) and does +not create an empty zone if either is true. + +The current list of empty zones is: + +- 10.IN-ADDR.ARPA +- 16.172.IN-ADDR.ARPA +- 17.172.IN-ADDR.ARPA +- 18.172.IN-ADDR.ARPA +- 19.172.IN-ADDR.ARPA +- 20.172.IN-ADDR.ARPA +- 21.172.IN-ADDR.ARPA +- 22.172.IN-ADDR.ARPA +- 23.172.IN-ADDR.ARPA +- 24.172.IN-ADDR.ARPA +- 25.172.IN-ADDR.ARPA +- 26.172.IN-ADDR.ARPA +- 27.172.IN-ADDR.ARPA +- 28.172.IN-ADDR.ARPA +- 29.172.IN-ADDR.ARPA +- 30.172.IN-ADDR.ARPA +- 31.172.IN-ADDR.ARPA +- 168.192.IN-ADDR.ARPA +- 64.100.IN-ADDR.ARPA +- 65.100.IN-ADDR.ARPA +- 66.100.IN-ADDR.ARPA +- 67.100.IN-ADDR.ARPA +- 68.100.IN-ADDR.ARPA +- 69.100.IN-ADDR.ARPA +- 70.100.IN-ADDR.ARPA +- 71.100.IN-ADDR.ARPA +- 72.100.IN-ADDR.ARPA +- 73.100.IN-ADDR.ARPA +- 74.100.IN-ADDR.ARPA +- 75.100.IN-ADDR.ARPA +- 76.100.IN-ADDR.ARPA +- 77.100.IN-ADDR.ARPA +- 78.100.IN-ADDR.ARPA +- 79.100.IN-ADDR.ARPA +- 80.100.IN-ADDR.ARPA +- 81.100.IN-ADDR.ARPA +- 82.100.IN-ADDR.ARPA +- 83.100.IN-ADDR.ARPA +- 84.100.IN-ADDR.ARPA +- 85.100.IN-ADDR.ARPA +- 86.100.IN-ADDR.ARPA +- 87.100.IN-ADDR.ARPA +- 88.100.IN-ADDR.ARPA +- 89.100.IN-ADDR.ARPA +- 90.100.IN-ADDR.ARPA +- 91.100.IN-ADDR.ARPA +- 92.100.IN-ADDR.ARPA +- 93.100.IN-ADDR.ARPA +- 94.100.IN-ADDR.ARPA +- 95.100.IN-ADDR.ARPA +- 96.100.IN-ADDR.ARPA +- 97.100.IN-ADDR.ARPA +- 98.100.IN-ADDR.ARPA +- 99.100.IN-ADDR.ARPA +- 100.100.IN-ADDR.ARPA +- 101.100.IN-ADDR.ARPA +- 102.100.IN-ADDR.ARPA +- 103.100.IN-ADDR.ARPA +- 104.100.IN-ADDR.ARPA +- 105.100.IN-ADDR.ARPA +- 106.100.IN-ADDR.ARPA +- 107.100.IN-ADDR.ARPA +- 108.100.IN-ADDR.ARPA +- 109.100.IN-ADDR.ARPA +- 110.100.IN-ADDR.ARPA +- 111.100.IN-ADDR.ARPA +- 112.100.IN-ADDR.ARPA +- 113.100.IN-ADDR.ARPA +- 114.100.IN-ADDR.ARPA +- 115.100.IN-ADDR.ARPA +- 116.100.IN-ADDR.ARPA +- 117.100.IN-ADDR.ARPA +- 118.100.IN-ADDR.ARPA +- 119.100.IN-ADDR.ARPA +- 120.100.IN-ADDR.ARPA +- 121.100.IN-ADDR.ARPA +- 122.100.IN-ADDR.ARPA +- 123.100.IN-ADDR.ARPA +- 124.100.IN-ADDR.ARPA +- 125.100.IN-ADDR.ARPA +- 126.100.IN-ADDR.ARPA +- 127.100.IN-ADDR.ARPA +- 0.IN-ADDR.ARPA +- 127.IN-ADDR.ARPA +- 254.169.IN-ADDR.ARPA +- 2.0.192.IN-ADDR.ARPA +- 100.51.198.IN-ADDR.ARPA +- 113.0.203.IN-ADDR.ARPA +- 255.255.255.255.IN-ADDR.ARPA +- 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA +- 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.IP6.ARPA +- 8.B.D.0.1.0.0.2.IP6.ARPA +- D.F.IP6.ARPA +- 8.E.F.IP6.ARPA +- 9.E.F.IP6.ARPA +- A.E.F.IP6.ARPA +- B.E.F.IP6.ARPA +- EMPTY.AS112.ARPA +- HOME.ARPA + +Empty zones can be set at the view level and only apply to views of +class IN. Disabled empty zones are only inherited from options if there +are no disabled empty zones specified at the view level. To override the +options list of disabled zones, disable the root zone at the +view level. For example: + +:: + + disable-empty-zone "."; + +If using the address ranges covered here, +reverse zones covering the addresses should already be in place. In practice this +appears to not be the case, with many queries being made to the +infrastructure servers for names in these spaces. So many, in fact, that +sacrificial servers had to be deployed to channel the query load +away from the infrastructure servers. + +.. note:: + + The real parent servers for these zones should disable all empty zones + under the parent zone they serve. For the real root servers, this is + all built-in empty zones. This enables them to return referrals + to deeper in the tree. + +.. namedconf:statement:: empty-server + :tags: server, zone + :short: Specifies the server name in the returned SOA record for empty zones. + + This specifies the server name that appears in the returned SOA record for + empty zones. If none is specified, the zone's name is used. + +.. namedconf:statement:: empty-contact + :tags: server, zone + :short: Specifies the contact name in the returned SOA record for empty zones. + + This specifies the contact name that appears in the returned SOA record for + empty zones. If none is specified, "." is used. + +.. namedconf:statement:: empty-zones-enable + :tags: server, zone + :short: Enables or disables all empty zones. + + This enables or disables all empty zones. By default, they are enabled. + +.. namedconf:statement:: disable-empty-zone + :tags: server, zone + :short: Disables individual empty zones. + + This disables individual empty zones. By default, none are disabled. This + option can be specified multiple times. + +.. _content_filtering: + +Content Filtering +^^^^^^^^^^^^^^^^^ + +.. namedconf:statement:: deny-answer-addresses + :tags: query + :short: Rejects A or AAAA records if the corresponding IPv4 or IPv6 addresses match a given :any:`address_match_list`. + + BIND 9 provides the ability to filter out responses from external + DNS servers containing certain types of data in the answer section. + Specifically, it can reject address (A or AAAA) records if the + corresponding IPv4 or IPv6 addresses match the given + :term:`address_match_list` of the :any:`deny-answer-addresses` option. + + In the :term:`address_match_list` of the :any:`deny-answer-addresses` option, + only :term:`ip_address` and :term:`netprefix` are meaningful; any :term:`server_key` is + silently ignored. + +.. namedconf:statement:: deny-answer-aliases + :tags: query + :short: Rejects CNAME or DNAME records if the "alias" name matches a given list of :any:`domain_name` elements. + + It can + also reject CNAME or DNAME records if the "alias" name (i.e., the CNAME + alias or the substituted query name due to DNAME) matches the given + list of :term:`domain_name` elements of the :any:`deny-answer-aliases` option, + where "match" means the alias name is a subdomain of one of the listed domain names. If + the optional list is specified in the ``except-from`` argument, records + whose query name matches the list are accepted regardless of the + filter setting. Likewise, if the alias name is a subdomain of the + corresponding zone, the :any:`deny-answer-aliases` filter does not apply; + for example, even if "example.com" is specified for + :any:`deny-answer-aliases`, + + :: + + www.example.com. CNAME xxx.example.com. + + returned by an "example.com" server is accepted. + +If a response message is rejected due to the filtering, the entire +message is discarded without being cached, and a SERVFAIL error is +returned to the client. + +This filtering is intended to prevent "DNS rebinding attacks," in which +an attacker, in response to a query for a domain name the attacker +controls, returns an IP address within the user's own network or an alias name +within the user's own domain. A naive web browser or script could then serve +as an unintended proxy, allowing the attacker to get access to an +internal node of the local network that could not be externally accessed +otherwise. See the paper available at +https://dl.acm.org/doi/10.1145/1315245.1315298 for more details +about these attacks. + +For example, with a domain named "example.net" and an internal +network using an IPv4 prefix 192.0.2.0/24, an administrator might specify the +following rules: + +:: + + deny-answer-addresses { 192.0.2.0/24; } except-from { "example.net"; }; + deny-answer-aliases { "example.net"; }; + +If an external attacker let a web browser in the local network look up +an IPv4 address of "attacker.example.com", the attacker's DNS server +would return a response like this: + +:: + + attacker.example.com. A 192.0.2.1 + +in the answer section. Since the rdata of this record (the IPv4 address) +matches the specified prefix 192.0.2.0/24, this response would be +ignored. + +On the other hand, if the browser looked up a legitimate internal web +server "www.example.net" and the following response were returned to the +BIND 9 server: + +:: + + www.example.net. A 192.0.2.2 + +it would be accepted, since the owner name "www.example.net" matches the +``except-from`` element, "example.net". + +Note that this is not really an attack on the DNS per se. In fact, there +is nothing wrong with having an "external" name mapped to an "internal" +IP address or domain name from the DNS point of view; it might actually +be provided for a legitimate purpose, such as for debugging. As long as +the mapping is provided by the correct owner, it either is not possible or does +not make sense to detect whether the intent of the mapping is legitimate +within the DNS. The "rebinding" attack must primarily be +protected at the application that uses the DNS. For a large site, +however, it may be difficult to protect all possible applications at +once. This filtering feature is provided only to help such an +operational environment; turning it on is generally discouraged +unless there is no other choice and the attack is a +real threat to applications. + +Care should be particularly taken if using this option for +addresses within 127.0.0.0/8. These addresses are obviously "internal," +but many applications conventionally rely on a DNS mapping from some +name to such an address. Filtering out DNS records containing this +address spuriously can break such applications. + +.. _rpz: + +Response Policy Zone (RPZ) Rewriting +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +BIND 9 includes a limited mechanism to modify DNS responses for requests +analogous to email anti-spam DNS rejection lists. Responses can be changed to +deny the existence of domains (NXDOMAIN), deny the existence of IP +addresses for domains (NODATA), or contain other IP addresses or data. + +.. namedconf:statement:: response-policy + :tags: server, query, zone, security + :short: Specifies response policy zones for the view or among global options. + + Response policy zones are named in the :any:`response-policy` option for + the view, or among the global options if there is no :any:`response-policy` + option for the view. Response policy zones are ordinary DNS zones + containing RRsets that can be queried normally if allowed. It is usually + best to restrict those queries with something like + ``allow-query { localhost; };``. + + A :any:`response-policy` option can support multiple policy zones. To + maximize performance, a radix tree is used to quickly identify response + policy zones containing triggers that match the current query. This + imposes an upper limit of 64 on the number of policy zones in a single + :any:`response-policy` option; more than that is a configuration error. + +Rules encoded in response policy zones are processed after those defined in +:ref:`access_control`. All queries from clients which are not permitted access +to the resolver are answered with a status code of REFUSED, regardless of +configured RPZ rules. + +Five policy triggers can be encoded in RPZ records. + +``RPZ-CLIENT-IP`` + IP records are triggered by the IP address of the DNS client. Client + IP address triggers are encoded in records that have owner names that + are subdomains of ``rpz-client-ip``, relativized to the policy zone + origin name, and that encode an address or address block. IPv4 addresses + are represented as ``prefixlength.B4.B3.B2.B1.rpz-client-ip``. The + IPv4 prefix length must be between 1 and 32. All four bytes - B4, B3, + B2, and B1 - must be present. B4 is the decimal value of the least + significant byte of the IPv4 address as in IN-ADDR.ARPA. + + IPv6 addresses are encoded in a format similar to the standard IPv6 + text representation, + ``prefixlength.W8.W7.W6.W5.W4.W3.W2.W1.rpz-client-ip``. Each of + W8,...,W1 is a one- to four-digit hexadecimal number representing 16 + bits of the IPv6 address as in the standard text representation of + IPv6 addresses, but reversed as in IP6.ARPA. (Note that this + representation of IPv6 addresses is different from IP6.ARPA, where each + hex digit occupies a label.) All 8 words must be present except when + one set of consecutive zero words is replaced with ``.zz.``, analogous + to double colons (::) in standard IPv6 text encodings. The IPv6 + prefix length must be between 1 and 128. + +``QNAME`` + QNAME policy records are triggered by query names of requests and + targets of CNAME records resolved to generate the response. The owner + name of a QNAME policy record is the query name relativized to the + policy zone. + +``RPZ-IP`` + IP triggers are IP addresses in an A or AAAA record in the ANSWER + section of a response. They are encoded like client-IP triggers, + except as subdomains of ``rpz-ip``. + +``RPZ-NSDNAME`` + NSDNAME triggers match names of authoritative servers for the query name, a + parent of the query name, a CNAME for the query name, or a parent of a CNAME. + They are encoded as subdomains of ``rpz-nsdname``, relativized + to the RPZ origin name. NSIP triggers match IP addresses in A and AAAA + RRsets for domains that can be checked against NSDNAME policy records. The + ``nsdname-enable`` phrase turns NSDNAME triggers off or on for a single + policy zone or for all zones. + + If authoritative name servers for the query name are not yet known, :iscman:`named` + recursively looks up the authoritative servers for the query name before + applying an RPZ-NSDNAME rule, which can cause a processing delay. To speed up + processing at the cost of precision, the ``nsdname-wait-recurse`` option can + be used; when set to ``no``, RPZ-NSDNAME rules are only applied when + authoritative servers for the query name have already been looked up and + cached. If authoritative servers for the query name are not in the cache, + the RPZ-NSDNAME rule is ignored, but the authoritative servers for + the query name are looked up in the background and the rule is + applied to subsequent queries. The default is ``yes``, + meaning RPZ-NSDNAME rules are always applied, even if authoritative + servers for the query name need to be looked up first. + +``RPZ-NSIP`` + NSIP triggers match the IP addresses of authoritative servers. They + are encoded like IP triggers, except as subdomains of ``rpz-nsip``. + NSDNAME and NSIP triggers are checked only for names with at least + ``min-ns-dots`` dots. The default value of ``min-ns-dots`` is 1, to + exclude top-level domains. The ``nsip-enable`` phrase turns NSIP + triggers off or on for a single policy zone or for all zones. + + If a name server's IP address is not yet known, :iscman:`named` + recursively looks up the IP address before applying an RPZ-NSIP rule, + which can cause a processing delay. To speed up processing at the cost + of precision, the ``nsip-wait-recurse`` option can be used; when set + to ``no``, RPZ-NSIP rules are only applied when a name server's + IP address has already been looked up and cached. If a server's IP + address is not in the cache, the RPZ-NSIP rule is ignored, + but the address is looked up in the background and the rule + is applied to subsequent queries. The default is ``yes``, + meaning RPZ-NSIP rules are always applied, even if an address + needs to be looked up first. + +The query response is checked against all response policy zones, so two +or more policy records can be triggered by a response. Because DNS +responses are rewritten according to at most one policy record, a single +record encoding an action (other than ``DISABLED`` actions) must be +chosen. Triggers, or the records that encode them, are chosen for +rewriting in the following order: + +1. Choose the triggered record in the zone that appears first in the + response-policy option. +2. Prefer CLIENT-IP to QNAME to IP to NSDNAME to NSIP triggers in a + single zone. +3. Among NSDNAME triggers, prefer the trigger that matches the smallest + name under the DNSSEC ordering. +4. Among IP or NSIP triggers, prefer the trigger with the longest + prefix. +5. Among triggers with the same prefix length, prefer the IP or NSIP + trigger that matches the smallest IP address. + +When the processing of a response is restarted to resolve DNAME or CNAME +records and a policy record set has not been triggered, all response +policy zones are again consulted for the DNAME or CNAME names and +addresses. + +RPZ record sets are any types of DNS record, except DNAME or DNSSEC, that +encode actions or responses to individual queries. Any of the policies +can be used with any of the triggers. For example, while the +``TCP-only`` policy is commonly used with ``client-IP`` triggers, it can +be used with any type of trigger to force the use of TCP for responses +with owner names in a zone. + +``PASSTHRU`` + The auto-acceptance policy is specified by a CNAME whose target is + ``rpz-passthru``. It causes the response to not be rewritten and is + most often used to "poke holes" in policies for CIDR blocks. + +``DROP`` + The auto-rejection policy is specified by a CNAME whose target is + ``rpz-drop``. It causes the response to be discarded. Nothing is sent + to the DNS client. + +``TCP-Only`` + The "slip" policy is specified by a CNAME whose target is + ``rpz-tcp-only``. It changes UDP responses to short, truncated DNS + responses that require the DNS client to try again with TCP. It is + used to mitigate distributed DNS reflection attacks. + +``NXDOMAIN`` + The "domain undefined" response is encoded by a CNAME whose target is + the root domain (.). + +``NODATA`` + The empty set of resource records is specified by a CNAME whose target + is the wildcard top-level domain (``*.``). It rewrites the response to + NODATA or ANCOUNT=0. + +``Local Data`` + A set of ordinary DNS records can be used to answer queries. Queries + for record types not in the set are answered with NODATA. + + A special form of local data is a CNAME whose target is a wildcard + such as \*.example.com. It is used as if an ordinary CNAME after + the asterisk (\*) has been replaced with the query name. + This special form is useful for query logging in the walled garden's + authoritative DNS server. + +All of the actions specified in all of the individual records in a +policy zone can be overridden with a ``policy`` clause in the +:any:`response-policy` option. An organization using a policy zone provided +by another organization might use this mechanism to redirect domains to +its own walled garden. + +``GIVEN`` + The placeholder policy says "do not override but perform the action + specified in the zone." + +``DISABLED`` + The testing override policy causes policy zone records to do nothing + but log what they would have done if the policy zone were not + disabled. The response to the DNS query is written (or not) + according to any triggered policy records that are not disabled. + Disabled policy zones should appear first, because they are often + not logged if a higher-precedence trigger is found first. + +``PASSTHRU``; ``DROP``; ``TCP-Only``; ``NXDOMAIN``; ``NODATA`` + These settings each override the corresponding per-record policy. + +``CNAME domain`` + This causes all RPZ policy records to act as if they were "cname domain" + records. + +By default, the actions encoded in a response policy zone are applied +only to queries that ask for recursion (RD=1). That default can be +changed for a single policy zone, or for all response policy zones in a view, +with a ``recursive-only no`` clause. This feature is useful for serving +the same zone files both inside and outside an :rfc:`1918` cloud and using +RPZ to delete answers that would otherwise contain :rfc:`1918` values on +the externally visible name server or view. + +Also by default, RPZ actions are applied only to DNS requests that +either do not request DNSSEC metadata (DO=0) or when no DNSSEC records +are available for the requested name in the original zone (not the response +policy zone). This default can be changed for all response policy zones +in a view with a ``break-dnssec yes`` clause. In that case, RPZ actions +are applied regardless of DNSSEC. The name of the clause option reflects +the fact that results rewritten by RPZ actions cannot verify. + +No DNS records are needed for a QNAME or Client-IP trigger; the name or +IP address itself is sufficient, so in principle the query name need not +be recursively resolved. However, not resolving the requested name can +leak the fact that response policy rewriting is in use, and that the name +is listed in a policy zone, to operators of servers for listed names. To +prevent that information leak, by default any recursion needed for a +request is done before any policy triggers are considered. Because +listed domains often have slow authoritative servers, this behavior can +cost significant time. The ``qname-wait-recurse no`` option overrides +the default and enables that behavior when recursion cannot change a +non-error response. The option does not affect QNAME or client-IP +triggers in policy zones listed after other zones containing IP, NSIP, +and NSDNAME triggers, because those may depend on the A, AAAA, and NS +records that would be found during recursive resolution. It also does +not affect DNSSEC requests (DO=1) unless ``break-dnssec yes`` is in use, +because the response would depend on whether RRSIG records were +found during resolution. Using this option can cause error responses +such as SERVFAIL to appear to be rewritten, since no recursion is being +done to discover problems at the authoritative server. + +.. namedconf:statement:: dnsrps-enable + :tags: server, security + :short: Turns on the DNS Response Policy Service (DNSRPS) interface. + + The ``dnsrps-enable yes`` option turns on the DNS Response Policy Service + (DNSRPS) interface, if it has been compiled in :iscman:`named` using + ``configure --enable-dnsrps``. + +.. namedconf:statement:: dnsrps-options + :tags: server, security + :short: Provides additional RPZ configuration settings, which are passed to the DNS Response Policy Service (DNSRPS) provider library. + + The block provides additional RPZ configuration + settings, which are passed through to the DNSRPS provider library. + Multiple DNSRPS settings in an :any:`dnsrps-options` string should be + separated with semi-colons (;). The DNSRPS provider, librpz, is passed a + configuration string consisting of the :any:`dnsrps-options` text, + concatenated with settings derived from the :any:`response-policy` + statement. + + Note: the :any:`dnsrps-options` text should only include configuration + settings that are specific to the DNSRPS provider. For example, the + DNSRPS provider from Farsight Security takes options such as + ``dnsrpzd-conf``, ``dnsrpzd-sock``, and ``dnzrpzd-args`` (for details of + these options, see the ``librpz`` documentation). Other RPZ + configuration settings could be included in :any:`dnsrps-options` as well, + but if :iscman:`named` were switched back to traditional RPZ by setting + :any:`dnsrps-enable` to "no", those options would be ignored. + +The TTL of a record modified by RPZ policies is set from the TTL of the +relevant record in the policy zone. It is then limited to a maximum value. +The ``max-policy-ttl`` clause changes the maximum number of seconds from its +default of 5. For convenience, TTL-style time-unit suffixes may be used +to specify the value. It also accepts ISO 8601 duration formats. + +For example, an administrator might use this option statement: + +:: + + response-policy { zone "badlist"; }; + +and this zone statement: + +:: + + zone "badlist" {type primary; file "primary/badlist"; allow-query {none;}; }; + +with this zone file: + +:: + + $TTL 1H + @ SOA LOCALHOST. named-mgr.example.com (1 1h 15m 30d 2h) + NS LOCALHOST. + + ; QNAME policy records. There are no periods (.) after the owner names. + nxdomain.domain.com CNAME . ; NXDOMAIN policy + *.nxdomain.domain.com CNAME . ; NXDOMAIN policy + nodata.domain.com CNAME *. ; NODATA policy + *.nodata.domain.com CNAME *. ; NODATA policy + bad.domain.com A 10.0.0.1 ; redirect to a walled garden + AAAA 2001:2::1 + bzone.domain.com CNAME garden.example.com. + + ; do not rewrite (PASSTHRU) OK.DOMAIN.COM + ok.domain.com CNAME rpz-passthru. + + ; redirect x.bzone.domain.com to x.bzone.domain.com.garden.example.com + *.bzone.domain.com CNAME *.garden.example.com. + + ; IP policy records that rewrite all responses containing A records in 127/8 + ; except 127.0.0.1 + 8.0.0.0.127.rpz-ip CNAME . + 32.1.0.0.127.rpz-ip CNAME rpz-passthru. + + ; NSDNAME and NSIP policy records + ns.domain.com.rpz-nsdname CNAME . + 48.zz.2.2001.rpz-nsip CNAME . + + ; auto-reject and auto-accept some DNS clients + 112.zz.2001.rpz-client-ip CNAME rpz-drop. + 8.0.0.0.127.rpz-client-ip CNAME rpz-drop. + + ; force some DNS clients and responses in the example.com zone to TCP + 16.0.0.1.10.rpz-client-ip CNAME rpz-tcp-only. + example.com CNAME rpz-tcp-only. + *.example.com CNAME rpz-tcp-only. + +RPZ can affect server performance. Each configured response policy zone +requires the server to perform one to four additional database lookups +before a query can be answered. For example, a DNS server with four +policy zones, each with all four kinds of response triggers (QNAME, IP, +NSIP, and NSDNAME), requires a total of 17 times as many database lookups +as a similar DNS server with no response policy zones. A BIND 9 server +with adequate memory and one response policy zone with QNAME and IP +triggers might achieve a maximum queries-per-second (QPS) rate about 20% +lower. A server with four response policy zones with QNAME and IP +triggers might have a maximum QPS rate about 50% lower. + +Responses rewritten by RPZ are counted in the ``RPZRewrites`` +statistics. + +The ``log`` clause can be used to optionally turn off rewrite logging +for a particular response policy zone. By default, all rewrites are +logged. + +The ``add-soa`` option controls whether the RPZ's SOA record is added to +the section for traceback of changes from this zone. +This can be set at the individual policy zone level or at the +response-policy level. The default is ``yes``. + +Updates to RPZ zones are processed asynchronously; if there is more than +one update pending they are bundled together. If an update to a RPZ zone +(for example, via IXFR) happens less than ``min-update-interval`` +seconds after the most recent update, the changes are not +carried out until this interval has elapsed. The default is ``60`` +seconds. For convenience, TTL-style time-unit suffixes may be used to +specify the value. It also accepts ISO 8601 duration formats. + +.. _rrl: + +Response Rate Limiting +^^^^^^^^^^^^^^^^^^^^^^ + +.. namedconf:statement:: rate-limit + :tags: query + :short: Controls excessive UDP responses, to prevent BIND 9 from being used to amplify reflection denial-of-service (DoS) attacks. + + Excessive, almost-identical UDP *responses* can be controlled by + configuring a :any:`rate-limit` clause in an :namedconf:ref:`options` or :any:`view` + statement. This mechanism keeps authoritative BIND 9 from being used to + amplify reflection denial-of-service (DoS) attacks. Short BADCOOKIE errors or + truncated (TC=1) responses can be sent to provide rate-limited responses to + legitimate clients within a range of forged, attacked IP addresses. + Legitimate clients react to dropped responses by retrying, + to BADCOOKIE errors by including a server cookie when retrying, + and to truncated responses by switching to TCP. + + This mechanism is intended for authoritative DNS servers. It can be used + on recursive servers, but can slow applications such as SMTP servers + (mail receivers) and HTTP clients (web browsers) that repeatedly request + the same domains. When possible, closing "open" recursive servers is + better. + + Response rate limiting uses a "credit" or "token bucket" scheme. Each + combination of identical response and client has a conceptual "account" + that earns a specified number of credits every second. A prospective + response debits its account by one. Responses are dropped or truncated + while the account is negative. + + .. namedconf:statement:: window + :tags: query + :short: Specifies the length of time during which responses are tracked. + + Responses are tracked within a rolling + window of time which defaults to 15 seconds, but which can be configured with + the :any:`window` option to any value from 1 to 3600 seconds (1 hour). The + account cannot become more positive than the per-second limit or more + negative than :any:`window` times the per-second limit. When the specified + number of credits for a class of responses is set to 0, those responses + are not rate-limited. + + .. namedconf:statement:: ipv4-prefix-length + :tags: server + :short: Specifies the prefix lengths of IPv4 address blocks. + + .. namedconf:statement:: ipv6-prefix-length + :tags: server + :short: Specifies the prefix lengths of IPv6 address blocks. + + The notions of "identical response" and "DNS client" for rate limiting + are not simplistic. All responses to an address block are counted as if + to a single client. The prefix lengths of address blocks are specified + with :any:`ipv4-prefix-length` (default 24) and :any:`ipv6-prefix-length` + (default 56). + + .. namedconf:statement:: responses-per-second + :tags: query + :short: Limits the number of non-empty responses for a valid domain name and record type. + + All non-empty responses for a valid domain name (qname) and record type + (qtype) are identical and have a limit specified with + :any:`responses-per-second` (default 0 or no limit). All valid wildcard + domain names are interpreted as the zone's origin name concatenated to the + "*" name. + + .. namedconf:statement:: nodata-per-second + :tags: query + :short: Limits the number of empty (NODATA) responses for a valid domain name. + + All empty (NODATA) + responses for a valid domain, regardless of query type, are identical. + Responses in the NODATA class are limited by :any:`nodata-per-second` + (default :any:`responses-per-second`). + + .. namedconf:statement:: nxdomains-per-second + :tags: query + :short: Limits the number of undefined subdomains for a valid domain name. + + Requests for any and all undefined + subdomains of a given valid domain result in NXDOMAIN errors, and are + identical regardless of query type. They are limited by + :any:`nxdomains-per-second` (default :any:`responses-per-second`). This + controls some attacks using random names, but can be relaxed or turned + off (set to 0) on servers that expect many legitimate NXDOMAIN + responses, such as from anti-spam rejection lists. + + .. namedconf:statement:: referrals-per-second + :tags: query + :short: Limits the number of referrals or delegations to a server for a given domain. + + Referrals or delegations + to the server of a given domain are identical and are limited by + :any:`referrals-per-second` (default :any:`responses-per-second`). + + Responses generated from local wildcards are counted and limited as if + they were for the parent domain name. This controls flooding using + random.wild.example.com. + + All requests that result in DNS errors other than NXDOMAIN, such as + SERVFAIL and FORMERR, are identical regardless of requested name (qname) + or record type (qtype). This controls attacks using invalid requests or + distant, broken authoritative servers. + + + .. namedconf:statement:: errors-per-second + :tags: server + :short: Limits the number of errors for a valid domain name and record type. + + By default the limit on errors is + the same as the :any:`responses-per-second` value, but it can be set + separately with :any:`errors-per-second`. + + .. namedconf:statement:: slip + :tags: query + :short: Sets the number of "slipped" responses to minimize the use of forged source addresses for an attack. + + Many attacks using DNS involve UDP requests with forged source + addresses. Rate limiting prevents the use of BIND 9 to flood a network + with responses to requests with forged source addresses, but could let a + third party block responses to legitimate requests. There is a mechanism + that can answer some legitimate requests from a client whose address is + being forged in a flood. Setting :any:`slip` to 2 (its default) causes + every other UDP request without a valid server cookie to be answered with + a small response. The small size and reduced frequency, and resulting lack of + amplification, of "slipped" responses make them unattractive for + reflection DoS attacks. :any:`slip` must be between 0 and 10. A value of 0 + does not "slip"; no small responses are sent due to rate limiting. Rather, + all responses are dropped. A value of 1 causes every response to slip; + values between 2 and 10 cause every nth response to slip. + + If the request included a client cookie, then a "slipped" response is + a BADCOOKIE error with a server cookie, which allows a legitimate client + to include the server cookie to be exempted from the rate limiting + when it retries the request. + If the request did not include a cookie, then a "slipped" response is + a truncated (TC=1) response, which prompts a legitimate client to + switch to TCP and thus be exempted from the rate limiting. Some error + responses, including REFUSED and SERVFAIL, cannot be replaced with + truncated responses and are instead leaked at the :any:`slip` rate. + + (Note: dropped responses from an authoritative server may reduce the + difficulty of a third party successfully forging a response to a + recursive resolver. The best security against forged responses is for + authoritative operators to sign their zones using DNSSEC and for + resolver operators to validate the responses. When this is not an + option, operators who are more concerned with response integrity than + with flood mitigation may consider setting :any:`slip` to 1, causing all + rate-limited responses to be truncated rather than dropped. This reduces + the effectiveness of rate-limiting against reflection attacks.) + + .. namedconf:statement:: qps-scale + :tags: query + :short: Tightens defenses during DNS attacks by scaling back the ratio of the current query-per-second rate. + + When the approximate query-per-second rate exceeds the :any:`qps-scale` + value, the :any:`responses-per-second`, :any:`errors-per-second`, + :any:`nxdomains-per-second`, and :any:`all-per-second` values are reduced by + the ratio of the current rate to the :any:`qps-scale` value. This feature + can tighten defenses during attacks. For example, with + ``qps-scale 250; responses-per-second 20;`` and a total query rate of + 1000 queries/second for all queries from all DNS clients including via + TCP, then the effective responses/second limit changes to (250/1000)*20, + or 5. Responses to requests that included a valid server cookie, + and responses sent via TCP, are not limited but are counted to compute + the query-per-second rate. + + .. namedconf:statement:: exempt-clients + :tags: query + :short: Exempts specific clients or client groups from rate limiting. + + Communities of DNS clients can be given their own parameters or no + rate limiting by putting :any:`rate-limit` statements in :any:`view` statements + instead of in the global ``option`` statement. A :any:`rate-limit` statement + in a view replaces, rather than supplements, a :any:`rate-limit` + statement among the main options. + + DNS clients within a view can be + exempted from rate limits with the :any:`exempt-clients` clause. + + .. namedconf:statement:: all-per-second + :tags: query + :short: Limits UDP responses of all kinds. + + UDP responses of all kinds can be limited with the :any:`all-per-second` + phrase. This rate limiting is unlike the rate limiting provided by + :any:`responses-per-second`, :any:`errors-per-second`, and + :any:`nxdomains-per-second` on a DNS server, which are often invisible to + the victim of a DNS reflection attack. Unless the forged requests of the + attack are the same as the legitimate requests of the victim, the + victim's requests are not affected. Responses affected by an + :any:`all-per-second` limit are always dropped; the :any:`slip` value has no + effect. An :any:`all-per-second` limit should be at least 4 times as large + as the other limits, because single DNS clients often send bursts of + legitimate requests. For example, the receipt of a single mail message + can prompt requests from an SMTP server for NS, PTR, A, and AAAA records + as the incoming SMTP/TCP/IP connection is considered. The SMTP server + can need additional NS, A, AAAA, MX, TXT, and SPF records as it + considers the SMTP ``Mail From`` command. Web browsers often repeatedly + resolve the same names that are duplicated in HTML <IMG> tags in a page. + :any:`all-per-second` is similar to the rate limiting offered by firewalls + but is often inferior. Attacks that justify ignoring the contents of DNS + responses are likely to be attacks on the DNS server itself. They + usually should be discarded before the DNS server spends resources making + TCP connections or parsing DNS requests, but that rate limiting must be + done before the DNS server sees the requests. + + + .. namedconf:statement:: max-table-size + :tags: server + :short: Sets the maximum size of the table used to track requests and rate-limit responses. + + .. namedconf:statement:: min-table-size + :tags: query + :short: Sets the minimum size of the table used to track requests and rate-limit responses. + + The maximum size of the table used to track requests and rate-limit + responses is set with :any:`max-table-size`. Each entry in the table is + between 40 and 80 bytes. The table needs approximately as many entries + as the number of requests received per second. The default is 20,000. To + reduce the cold start of growing the table, :any:`min-table-size` (default 500) + can set the minimum table size. Enable :any:`rate-limit` category + logging to monitor expansions of the table and inform choices for the + initial and maximum table size. + + .. namedconf:statement:: log-only + :tags: logging, query + :short: Tests rate-limiting parameters without actually dropping any requests. + + Use ``log-only yes`` to test rate-limiting parameters without actually + dropping any requests. + + Responses dropped by rate limits are included in the ``RateDropped`` and + ``QryDropped`` statistics. Responses that are truncated by rate limits are + included in ``RateSlipped`` and ``RespTruncated``. + +NXDOMAIN Redirection +^^^^^^^^^^^^^^^^^^^^ + +:iscman:`named` supports NXDOMAIN redirection via two methods: + +- :any:`Redirect zone <type redirect>` +- Redirect namespace + +With either method, when :iscman:`named` gets an NXDOMAIN response it examines a +separate namespace to see if the NXDOMAIN response should be replaced +with an alternative response. + +With a redirect zone (``zone "." { type redirect; };``), the data used +to replace the NXDOMAIN is held in a single zone which is not part of +the normal namespace. All the redirect information is contained in the +zone; there are no delegations. + +.. namedconf:statement:: nxdomain-redirect + :tags: query + :short: Appends the specified suffix to the original query name, when replacing an NXDOMAIN with a redirect namespace. + + With a redirect namespace (``option { nxdomain-redirect <suffix> };``), + the data used to replace the NXDOMAIN is part of the normal namespace + and is looked up by appending the specified suffix to the original + query name. This roughly doubles the cache required to process + NXDOMAIN responses, as both the original NXDOMAIN response and the + replacement data (or an NXDOMAIN indicating that there is no + replacement) must be stored. + +If both a redirect zone and a redirect namespace are configured, the +redirect zone is tried first. + +``server`` Block Grammar +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: server + :tags: server + :short: Defines characteristics to be associated with a remote name server. + +``server`` Block Definition and Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The :namedconf:ref:`server` statement defines characteristics to be associated with a +remote name server. If a prefix length is specified, then a range of +servers is covered. Only the most specific server clause applies, +regardless of the order in :iscman:`named.conf`. + +The :rndcconf:ref:`server` statement can occur at the top level of the configuration +file or inside a :any:`view` statement. If a :any:`view` statement contains +one or more :namedconf:ref:`server` statements, only those apply to the view and any +top-level ones are ignored. If a view contains no :namedconf:ref:`server` statements, +any top-level :namedconf:ref:`server` statements are used as defaults. + + +.. namedconf:statement:: bogus + :tags: server + :short: Allows a remote server to be ignored. + + If a remote server is giving out bad data, marking it + as bogus prevents further queries to it. The default value of + :any:`bogus` is ``no``. + +.. namedconf:statement:: edns + :tags: server + :short: Controls the use of the EDNS0 (:rfc:`2671`) feature. + + The :any:`edns` clause determines whether the local server attempts to + use EDNS when communicating with the remote server. The default is + ``yes``. + +.. namedconf:statement:: edns-version + :tags: server + :short: Sets the maximum EDNS VERSION that is sent to the server(s) by the resolver. + + The :any:`edns-version` option sets the maximum EDNS VERSION that is + sent to the server(s) by the resolver. The actual EDNS version sent is + still subject to normal EDNS version-negotiation rules (see :rfc:`6891`), + the maximum EDNS version supported by the server, and any other + heuristics that indicate that a lower version should be sent. This + option is intended to be used when a remote server reacts badly to a + given EDNS version or higher; it should be set to the highest version + the remote server is known to support. Valid values are 0 to 255; higher + values are silently adjusted. This option is not needed until + higher EDNS versions than 0 are in use. + +.. namedconf:statement:: padding + :tags: server + :short: Adds EDNS Padding options to outgoing messages to increase the packet size. + + The option adds EDNS Padding options to outgoing messages, + increasing the packet size to a multiple of the specified block size. + Valid block sizes range from 0 (the default, which disables the use of + EDNS Padding) to 512 bytes. Larger values are reduced to 512, with a + logged warning. Note: this option is not currently compatible with no + TSIG or SIG(0), as the EDNS OPT record containing the padding would have + to be added to the packet after it had already been signed. + +.. namedconf:statement:: tcp-only + :tags: server + :short: Sets the transport protocol to TCP. + + The option sets the transport protocol to TCP. The default + is to use the UDP transport and to fallback on TCP only when a truncated + response is received. + +.. namedconf:statement:: tcp-keepalive + :tags: server + :short: Adds EDNS TCP keepalive to messages sent over TCP. + + The option adds EDNS TCP keepalive to messages sent + over TCP. Note that currently idle timeouts in responses are ignored. + +.. namedconf:statement:: transfers + :tags: server + :short: Limits the number of concurrent inbound zone transfers from a server. + + :any:`transfers` is used to limit the number of concurrent inbound zone + transfers from the specified server. If no :any:`transfers` clause is + specified, the limit is set according to the :any:`transfers-per-ns` + option. + +.. namedconf:statement:: keys + :tags: server, security + :short: Specifies one or more :any:`server_key` s to be used with a remote server. + :suppress_grammar: + + .. warning:: + Not to be confused with :any:`keys` in :any:`dnssec-policy` specification. + Although statements with the same name exist in both contexts, they refer + to fundamentally incompatible concepts. + + In the context of a :namedconf:ref:`server` block, the option identifies a + :term:`server_key` defined by the :namedconf:ref:`key` statement, to be used for + transaction security (see :ref:`tsig`) + when talking to the remote server. When a request is sent to the remote + server, a request signature is generated using the key specified + here and appended to the message. A request originating from the remote + server is not required to be signed by this key. + + Only a single key per server is currently supported. + +It is possible to override the following values defined in :namedconf:ref:`view` +and :namedconf:ref:`options` blocks: + + - :namedconf:ref:`edns-udp-size` + - :namedconf:ref:`max-udp-size` + - :namedconf:ref:`notify-source-v6` + - :namedconf:ref:`notify-source` + - :namedconf:ref:`provide-ixfr` + - :namedconf:ref:`query-source-v6` + - :namedconf:ref:`query-source` + - :namedconf:ref:`request-expire` + - :namedconf:ref:`request-ixfr` + - :namedconf:ref:`request-nsid` + - :namedconf:ref:`send-cookie` + - :namedconf:ref:`transfer-format` + - :namedconf:ref:`transfer-source-v6` + - :namedconf:ref:`transfer-source` + + +:any:`statistics-channels` Block Grammar +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: statistics-channels + :tags: logging + :short: Specifies the communication channels to be used by system administrators to access statistics information on the name server. + +:any:`statistics-channels` Block Definition and Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The :any:`statistics-channels` statement declares communication channels to +be used by system administrators to get access to statistics information +on the name server. + +This statement is intended to be flexible to support multiple communication +protocols in the future, but currently only HTTP access is supported. It +requires that BIND 9 be compiled with libxml2 and/or json-c (also known +as libjson0); the :any:`statistics-channels` statement is still accepted +even if it is built without the library, but any HTTP access fails +with an error. + +An :any:`inet` control channel is a TCP socket listening at the specified +:term:`port` on the specified :term:`ip_address`, which can be an IPv4 or IPv6 +address. An :term:`ip_address` of ``*`` (asterisk) is interpreted as the IPv4 +wildcard address; connections are accepted on any of the system's +IPv4 addresses. To listen on the IPv6 wildcard address, use an +:term:`ip_address` of ``::``. + +If no port is specified, port 80 is used for HTTP channels. The asterisk +(``*``) cannot be used for :term:`port`. + +Attempts to open a statistics channel are restricted by the +optional ``allow`` clause. Connections to the statistics channel are +permitted based on the :term:`address_match_list`. If no ``allow`` clause is +present, :iscman:`named` accepts connection attempts from any address. Since +the statistics may contain sensitive internal information, the source of +connection requests must be restricted appropriately so that only +trusted parties can access the statistics channel. + +Gathering data exposed by the statistics channel locks various subsystems in +:iscman:`named`, which could slow down query processing if statistics data is +requested too often. + +An issue in the statistics channel would be considered a security issue +only if it could be exploited by unprivileged users circumventing the access +control list. In other words, any issue in the statistics channel that could be +used to access information unavailable otherwise, or to crash :iscman:`named`, is +not considered a security issue if it can be avoided through the +use of a secure configuration. + +If no :any:`statistics-channels` statement is present, :iscman:`named` does not +open any communication channels. + +The statistics are available in various formats and views, depending on +the URI used to access them. For example, if the statistics channel is +configured to listen on 127.0.0.1 port 8888, then the statistics are +accessible in XML format at http://127.0.0.1:8888/ or +http://127.0.0.1:8888/xml. A CSS file is included, which can format the +XML statistics into tables when viewed with a stylesheet-capable +browser, and into charts and graphs using the Google Charts API when +using a JavaScript-capable browser. + +Broken-out subsets of the statistics can be viewed at +http://127.0.0.1:8888/xml/v3/status (server uptime and last +reconfiguration time), http://127.0.0.1:8888/xml/v3/server (server and +resolver statistics), http://127.0.0.1:8888/xml/v3/zones (zone +statistics), http://127.0.0.1:8888/xml/v3/net (network status and socket +statistics), http://127.0.0.1:8888/xml/v3/mem (memory manager +statistics), http://127.0.0.1:8888/xml/v3/tasks (task manager +statistics), and http://127.0.0.1:8888/xml/v3/traffic (traffic sizes). + +The full set of statistics can also be read in JSON format at +http://127.0.0.1:8888/json, with the broken-out subsets at +http://127.0.0.1:8888/json/v1/status (server uptime and last +reconfiguration time), http://127.0.0.1:8888/json/v1/server (server and +resolver statistics), http://127.0.0.1:8888/json/v1/zones (zone +statistics), http://127.0.0.1:8888/json/v1/net (network status and +socket statistics), http://127.0.0.1:8888/json/v1/mem (memory manager +statistics), http://127.0.0.1:8888/json/v1/tasks (task manager +statistics), and http://127.0.0.1:8888/json/v1/traffic (traffic sizes). + +:any:`tls` Block Grammar +~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: tls + :tags: security + :short: Configures a TLS connection. + +:any:`tls` Block Definition and Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The :any:`tls` statement is used to configure a TLS connection; this +configuration can then be referenced by a :any:`listen-on` or :any:`listen-on-v6` +statement to cause :iscman:`named` to listen for incoming requests via TLS, +or in the :any:`primaries` statement for a zone of :any:`type secondary` to +cause zone transfer requests to be sent via TLS. + +:any:`tls` can only be set at the top level of :iscman:`named.conf`. + +The following options can be specified in a :any:`tls` statement: + +.. namedconf:statement:: key-file + :tags: server, security + :short: Specifies the path to a file containing the private TLS key for a connection. + + Path to a file containing the private TLS key to be used for + the connection. + +.. namedconf:statement:: cert-file + :tags: server, security + :short: Specifies the path to a file containing the TLS certificate for a connection. + + Path to a file containing the TLS certificate to be used for + the connection. + +.. namedconf:statement:: ca-file + :tags: server, security + :short: Specifies the path to a file containing TLS certificates for trusted CA authorities, used to verify remote peer certificates. + + Path to a file containing trusted CA authorities' TLS + certificates used to verify remote peer certificates. Specifying + this option enables remote peer certificates' verification. For + incoming connections, specifying this option makes BIND require + a valid TLS certificate from a client. In the case of outgoing + connections, if :any:`remote-hostname` is not specified, then the remote + server IP address is used instead. + +.. namedconf:statement:: dhparam-file + :tags: server, security + :short: Specifies the path to a file containing Diffie-Hellman parameters, for enabling cipher suites. + + Path to a file containing Diffie-Hellman parameters, + which is needed to enable the cipher suites depending on the + Diffie-Hellman ephemeral key exchange (DHE). Having these parameters + specified is essential for enabling perfect forward secrecy capable + ciphers in TLSv1.2. + +.. namedconf:statement:: remote-hostname + :tags: security + :short: Specifies the expected hostname in the TLS certificate of the remote server. + + The expected hostname in the TLS certificate of the + remote server. This option enables a remote server certificate + verification. If :any:`ca-file` is not specified, then the + platform-specific certificates store is used for + verification. This option is used when connecting to a remote peer + only and, thus, is ignored when :any:`tls` statements are referenced + by :any:`listen-on` or :any:`listen-on-v6` statements. + +.. namedconf:statement:: protocols + :tags: security + :short: Specifies the allowed versions of the TLS protocol. + + Allowed versions of the TLS protocol. TLS version 1.2 and higher are + supported, depending on the cryptographic library in use. Multiple + versions might be specified (e.g. + ``protocols { TLSv1.2; TLSv1.3; };``). + +.. namedconf:statement:: ciphers + :tags: security + :short: Specifies a list of allowed ciphers. + + Cipher list which defines allowed ciphers, such as + ``HIGH:!aNULL:!MD5:!SHA1:!SHA256:!SHA384``. The string must be + formed according to the rules specified in the OpenSSL documentation + (see https://www.openssl.org/docs/man1.1.1/man1/ciphers.html + for details). + +.. namedconf:statement:: prefer-server-ciphers + :tags: server, security + :short: Specifies that server ciphers should be preferred over client ones. + + Specifies that server ciphers should be preferred over client ones. + +.. namedconf:statement:: session-tickets + :tags: security + :short: Enables or disables session resumption through TLS session tickets. + + Enables or disables session resumption through TLS session tickets, + as defined in RFC5077. Disabling the stateless session tickets + might be required in the cases when forward secrecy is needed, + or the TLS certificate and key pair is planned to be used across + multiple BIND instances. + +.. warning:: + + TLS configuration is subject to change and incompatible changes might + be introduced in the future. Users of TLS are encouraged to carefully + read release notes when upgrading. + +The options described above are used to control different aspects of +TLS functioning. Thus, most of them have no well-defined default +values, as these depend on the cryptographic library version in use +and system-wide cryptographic policy. On the other hand, by specifying +the needed options one could have a uniform configuration deployable +across a range of platforms. + +An example of privacy-oriented, perfect forward secrecy enabled +configuration can be found below. It can be used as a +starting point. + +:: + + tls local-tls { + key-file "/path/to/key.pem"; + cert-file "/path/to/fullchain_cert.pem"; + dhparam-file "/path/to/dhparam.pem"; + ciphers "HIGH:!kRSA:!aNULL:!eNULL:!RC4:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS:!SHA1:!SHA256:!SHA384"; + prefer-server-ciphers yes; + session-tickets no; + }; + +A Diffie-Hellman parameters file can be generated using e.g. OpenSSL, +like follows: + +:: + + openssl dhparam -out /path/to/dhparam.pem <3072_or_4096> + +Ensure that it gets generated on a machine with enough entropy from +external sources (e.g. the computer you work on should be fine, +the remote virtual machine or server might be not). These files do +not contain any sensitive data and can be shared if required. + +There are two built-in TLS connection configurations: ``ephemeral``, +uses a temporary key and certificate created for the current :iscman:`named` +session only, and ``none``, which can be used when setting up an HTTP +listener with no encryption. + +BIND supports the following TLS authentication mechanisms described in +the RFC 9103, Section 9.3: Opportunistic TLS, Strict TLS, and Mutual +TLS. + +.. _opportunistic-tls: + +Opportunistic TLS provides encryption for data but does not provide +any authentication for the channel. This mode is the default one and +it is used whenever :any:`remote-hostname` and :any:`ca-file` options are not set +in :any:`tls` statements in use. RFC 9103 allows optional fallback to +clear-text DNS in the cases when TLS is not available. Still, BIND +intentionally does not support that in order to protect from +unexpected data leaks due to misconfiguration. Both BIND and its +complementary tools either successfully establish a secure channel via +TLS when instructed to do so or fail to establish a connection +otherwise. + +.. _strict-tls: + +Strict TLS provides server authentication via a pre-configured +hostname for outgoing connections. This mechanism offers both channel +confidentiality and channel authentication (of the server). In order +to achieve Strict TLS, one needs to use :any:`remote-hostname` and, optionally, +:any:`ca-file` options in the :any:`tls` statements used for establishing +outgoing connections (e.g. the ones used to download zone from +primaries via TLS). Providing any of the mentioned options will enable +server authentication. If :any:`remote-hostname` is provided but :any:`ca-file` is +missing, then the platform-specific certificate authority certificates +are used for authentication. The set roughly corresponds to the one +used by WEB-browsers to authenticate HTTPS hosts. On the other hand, +if :any:`ca-file` is provided but :any:`remote-hostname` is missing, then the +remote side's IP address is used instead. + +.. _mutual-tls: + +Mutual TLS is an extension to Strict TLS that provides channel +confidentiality and mutual channel authentication. It builds up upon +the clients offering client certificates when establishing connections +and them doing the server authentication as in the case of Strict +TLS. The server verifies the provided client certificates and accepts +the TLS connection in case of successful verification or rejects it +otherwise. In order to instruct the server to require and verify +client TLS certificates, one needs to specify the :any:`ca-file` option +in :any:`tls` configurations used to configure server listeners. The +provided file must contain certificate authority certificates used to +issue client certificates. In most cases, one should build one's own +TLS certificate authority specifically to issue client certificates +and include the certificate authority certificate into the file. + +For authenticating zone transfers over TLS, Mutual TLS might be +considered a standalone solution, while Strict TLS paired with +TSIG-based authentication and, optionally, IP-based access lists, +might be considered acceptable for most practical purposes. Mutual TLS +has the advantage of not requiring TSIG and thus, not having security +issues related to shared cryptographic secrets. + +:any:`http` Block Grammar +~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: http + :tags: server, query + :short: Configures HTTP endpoints on which to listen for DNS-over-HTTPS (DoH) queries. + +:any:`http` Block Definition and Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The :any:`http` statement is used to configure HTTP endpoints on which +to listen for DNS-over-HTTPS (DoH) queries. This configuration can +then be referenced by a :any:`listen-on` or :any:`listen-on-v6` statement to +cause :iscman:`named` to listen for incoming requests over HTTPS. + +:any:`http` can only be set at the top level of :iscman:`named.conf`. + +The following options can be specified in an :any:`http` statement: + +.. namedconf:statement:: endpoints + :tags: server, query + :short: Specifies a list of HTTP query paths on which to listen. + + A list of HTTP query paths on which to listen. This is the portion + of an :rfc:`3986`-compliant URI following the hostname; it must be + an absolute path, beginning with "/". The default value + is ``"/dns-query"``, if omitted. + +.. namedconf:statement:: listener-clients + :tags: server, query + :short: Specifies a per-listener quota for active connections. + + The option specifies a per-listener quota for active connections. + +.. namedconf:statement:: streams-per-connection + :tags: server, query + :short: Specifies the maximum number of concurrent HTTP/2 streams over an HTTP/2 connection. + + The option specifies the hard limit on the number of concurrent + HTTP/2 streams over an HTTP/2 connection. + +Any of the options above could be omitted. In such a case, a global value +specified in the :namedconf:ref:`options` statement is used +(see :any:`http-listener-clients`, :any:`http-streams-per-connection`. + +For example, the following configuration enables DNS-over-HTTPS queries on +all local addresses: + +:: + + http local { + endpoints { "/dns-query"; }; + }; + + options { + .... + listen-on tls ephemeral http local { any; }; + listen-on-v6 tls ephemeral http local { any; }; + }; + + +:any:`trust-anchors` Block Grammar +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: trust-anchors + :tags: dnssec + :short: Defines :ref:`DNSSEC` trust anchors. + +:any:`trust-anchors` Block Definition and Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The :any:`trust-anchors` statement defines DNSSEC trust anchors. DNSSEC is +described in :ref:`DNSSEC`. + +A trust anchor is defined when the public key or public key digest for a non-authoritative +zone is known but cannot be securely obtained through DNS, either +because it is the DNS root zone or because its parent zone is unsigned. +Once a key or digest has been configured as a trust anchor, it is treated as if it +has been validated and proven secure. + +The resolver attempts DNSSEC validation on all DNS data in subdomains of +configured trust anchors. Validation below specified names can be +temporarily disabled by using :option:`rndc nta`, or permanently disabled with +the :any:`validate-except` option. + +All keys listed in :any:`trust-anchors`, and their corresponding zones, are +deemed to exist regardless of what parent zones say. Only keys +configured as trust anchors are used to validate the DNSKEY RRset for +the corresponding name. The parent's DS RRset is not used. + +:any:`trust-anchors` may be set at the top level of :iscman:`named.conf` or within +a view. If it is set in both places, the configurations are additive; +keys defined at the top level are inherited by all views, but keys +defined in a view are only used within that view. + +The :any:`trust-anchors` statement can contain +multiple trust-anchor entries, each consisting of a +domain name, followed by an "anchor type" keyword indicating +the trust anchor's format, followed by the key or digest data. + +If the anchor type is ``static-key`` or +``initial-key``, then it is followed with the +key's flags, protocol, and algorithm, plus the Base64 representation +of the public key data. This is identical to the text +representation of a DNSKEY record. Spaces, tabs, newlines, and +carriage returns are ignored in the key data, so the +configuration may be split into multiple lines. + +If the anchor type is ``static-ds`` or +``initial-ds``, it is followed with the +key tag, algorithm, digest type, and the hexadecimal +representation of the key digest. This is identical to the +text representation of a DS record. Spaces, tabs, newlines, +and carriage returns are ignored. + +Trust anchors configured with the +``static-key`` or ``static-ds`` +anchor types are immutable, while keys configured with +``initial-key`` or ``initial-ds`` +can be kept up-to-date automatically, without intervention from the resolver operator. +(``static-key`` keys are identical to keys configured using the +deprecated :any:`trusted-keys` statement.) + +Suppose, for example, that a zone's key-signing key was compromised, and +the zone owner had to revoke and replace the key. A resolver which had +the original key +configured using ``static-key`` or +``static-ds`` would be unable to validate +this zone any longer; it would reply with a SERVFAIL response +code. This would continue until the resolver operator had +updated the :any:`trust-anchors` statement with +the new key. + +If, however, the trust anchor had been configured using +``initial-key`` or ``initial-ds`` +instead, the zone owner could add a "stand-by" key to +the zone in advance. :iscman:`named` would store +the stand-by key, and when the original key was revoked, +:iscman:`named` would be able to transition smoothly +to the new key. It would also recognize that the old key had +been revoked and cease using that key to validate answers, +minimizing the damage that the compromised key could do. +This is the process used to keep the ICANN root DNSSEC key +up-to-date. + +Whereas ``static-key`` and +``static-ds`` trust anchors continue +to be trusted until they are removed from +:iscman:`named.conf`, an +``initial-key`` or ``initial-ds`` +is only trusted *once*: for as long as it +takes to load the managed key database and start the +:rfc:`5011` key maintenance process. + +It is not possible to mix static with initial trust anchors +for the same domain name. + +The first time :iscman:`named` runs with an +``initial-key`` or ``initial-ds`` +configured in :iscman:`named.conf`, it fetches the +DNSKEY RRset directly from the zone apex, +and validates it +using the trust anchor specified in :any:`trust-anchors`. +If the DNSKEY RRset is validly signed by a key matching +the trust anchor, then it is used as the basis for a new +managed-keys database. + +From that point on, whenever :iscman:`named` runs, it sees the ``initial-key`` or ``initial-ds`` +listed in :any:`trust-anchors`, checks to make sure :rfc:`5011` key maintenance +has already been initialized for the specified domain, and if so, +simply moves on. The key specified in the :any:`trust-anchors` statement is +not used to validate answers; it is superseded by the key or keys stored +in the managed-keys database. + +The next time :iscman:`named` runs after an ``initial-key`` or ``initial-ds`` has been *removed* +from the :any:`trust-anchors` statement (or changed to a ``static-key`` or ``static-ds``), the +corresponding zone is removed from the managed-keys database, and +:rfc:`5011` key maintenance is no longer used for that domain. + +In the current implementation, the managed-keys database is stored as a +master-format zone file. + +On servers which do not use views, this file is named +``managed-keys.bind``. When views are in use, there is a separate +managed-keys database for each view; the filename is the view name +(or, if a view name contains characters which would make it illegal as a +filename, a hash of the view name), followed by the suffix ``.mkeys``. + +When the key database is changed, the zone is updated. As with any other +dynamic zone, changes are written into a journal file, e.g., +``managed-keys.bind.jnl`` or ``internal.mkeys.jnl``. Changes are +committed to the primary file as soon as possible afterward, +usually within 30 seconds. Whenever :iscman:`named` is using +automatic key maintenance, the zone file and journal file can be +expected to exist in the working directory. (For this reason, among +others, the working directory should be always be writable by +:iscman:`named`.) + +If the :any:`dnssec-validation` option is set to ``auto``, :iscman:`named` +automatically initializes an ``initial-key`` for the root zone. The key +that is used to initialize the key-maintenance process is stored in +``bind.keys``; the location of this file can be overridden with the +:any:`bindkeys-file` option. As a fallback in the event no ``bind.keys`` +can be found, the initializing key is also compiled directly into +:iscman:`named`. + +:any:`dnssec-policy` Block Grammar +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: dnssec-policy + :tags: dnssec + :short: Defines a key and signing policy (KASP) for zones. + +:any:`dnssec-policy` Block Definition and Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The :any:`dnssec-policy` statement defines a key and signing policy (KASP) +for zones. + +A KASP determines how one or more zones are signed with DNSSEC. For +example, it specifies how often keys should roll, which cryptographic +algorithms to use, and how often RRSIG records need to be refreshed. +Multiple key and signing policies can be configured with unique policy names. + +A policy for a zone is selected using a :any:`dnssec-policy` statement in the +:namedconf:ref:`zone` block, specifying the name of the policy that should be +used. + +There are three built-in policies: + - ``default``, which uses the :ref:`default policy <dnssec_policy_default>`, + - ``insecure``, to be used when you want to gracefully unsign your zone, + - ``none``, which means no DNSSEC policy (the same as not selecting + :any:`dnssec-policy` at all; the zone is not signed.) + +Keys are not shared among zones, which means that one set of keys per +zone is generated even if they have the same policy. If multiple views +are configured with different versions of the same zone, each separate +version uses the same set of signing keys. + +The :any:`dnssec-policy` statement requires dynamic DNS to be set up, or +:any:`inline-signing` to be enabled. + +If :any:`inline-signing` is enabled, this means that a signed version of the +zone is maintained separately and is written out to a different file on disk +(the zone's filename plus a ``.signed`` extension). + +If the zone is dynamic because it is configured with an :any:`update-policy` or +:any:`allow-update`, the DNSSEC records are written to the filename set in the +original zone's :any:`file`, unless :any:`inline-signing` is explicitly set. + +Key rollover timing is computed for each key according to the key +lifetime defined in the KASP. The lifetime may be modified by zone TTLs +and propagation delays, to prevent validation failures. When a key +reaches the end of its lifetime, :iscman:`named` generates and publishes a new +key automatically, then deactivates the old key and activates the new +one; finally, the old key is retired according to a computed schedule. + +Zone-signing key (ZSK) rollovers require no operator input. Key-signing +key (KSK) and combined-signing key (CSK) rollovers require action to be +taken to submit a DS record to the parent. Rollover timing for KSKs and +CSKs is adjusted to take into account delays in processing and +propagating DS updates. + +.. _dnssec_policy_default: + +Policy ``default`` causes the zone to be signed with a single combined-signing +key (CSK) using algorithm ECDSAP256SHA256; this key has an unlimited +lifetime. (A verbose copy of this policy may be found in the source +tree, in the file ``doc/misc/dnssec-policy.default.conf``.) + +.. note:: The default signing policy may change in future releases. + This could require changes to a signing policy when upgrading to a + new version of BIND. Check the release notes carefully when + upgrading to be informed of such changes. To prevent policy changes + on upgrade, use an explicitly defined :any:`dnssec-policy`, rather than + ``default``. + +If a :any:`dnssec-policy` statement is modified and the server restarted or +reconfigured, :iscman:`named` attempts to change the policy smoothly from the +old one to the new. For example, if the key algorithm is changed, then +a new key is generated with the new algorithm, and the old algorithm is +retired when the existing key's lifetime ends. + +.. note:: Rolling to a new policy while another key rollover is already + in progress is not yet supported, and may result in unexpected + behavior. + +The following options can be specified in a :any:`dnssec-policy` statement: + +.. namedconf:statement:: dnskey-ttl + :tags: dnssec + :short: Specifies the time to live (TTL) for DNSKEY resource records. + + This indicates the TTL to use when generating DNSKEY resource + records. The default is 1 hour (3600 seconds). + +:any:`keys` + This is a list specifying the algorithms and roles to use when + generating keys and signing the zone. Entries in this list do not + represent specific DNSSEC keys, which may be changed on a regular + basis, but the roles that keys play in the signing policy. For + example, configuring a KSK of algorithm RSASHA256 ensures that the + DNSKEY RRset always includes a key-signing key for that algorithm. + + Here is an example (for illustration purposes only) of some possible + entries in a ``keys`` list: + + :: + + keys { + ksk key-directory lifetime unlimited algorithm rsasha256 2048; + zsk lifetime 30d algorithm 8; + csk lifetime P6MT12H3M15S algorithm ecdsa256; + }; + + This example specifies that three keys should be used in the zone. + The first token determines which role the key plays in signing + RRsets. If set to ``ksk``, then this is a key-signing key; it has + the KSK flag set and is only used to sign DNSKEY, CDS, and CDNSKEY + RRsets. If set to ``zsk``, this is a zone-signing key; the KSK flag + is unset, and the key signs all RRsets *except* DNSKEY, CDS, and + CDNSKEY. If set to ``csk``, the key has the KSK flag set and is + used to sign all RRsets. + + An optional second token determines where the key is stored. + Currently, keys can only be stored in the configured + :any:`key-directory`. This token may be used in the future to store + keys in hardware security modules or separate directories. + + The ``lifetime`` parameter specifies how long a key may be used + before rolling over. For convenience, TTL-style time-unit suffixes + can be used to specify the key lifetime. It also accepts ISO 8601 + duration formats. + + In the example above, the first key has an + unlimited lifetime, the second key may be used for 30 days, and the + third key has a rather peculiar lifetime of 6 months, 12 hours, 3 + minutes, and 15 seconds. A lifetime of 0 seconds is the same as + ``unlimited``. + + Note that the lifetime of a key may be extended if retiring it too + soon would cause validation failures. The key lifetime must be + longer than the time it takes to do a rollover; that is, the lifetime + must be more than the publication interval (which is the sum of + :any:`dnskey-ttl`, :any:`publish-safety`, and :any:`zone-propagation-delay`). + It must also be more than the retire interval (which is the sum of + :any:`max-zone-ttl`, :any:`retire-safety` and :any:`zone-propagation-delay` + for ZSKs, and the sum of :any:`parent-ds-ttl`, :any:`retire-safety`, and + :any:`parent-propagation-delay` for KSKs and CSKs). BIND 9 treats a key + lifetime that is too short as an error. + + The ``algorithm`` parameter specifies the key's algorithm, expressed + either as a string ("rsasha256", "ecdsa384", etc.) or as a decimal + number. An optional second parameter specifies the key's size in + bits. If it is omitted, as shown in the example for the second and + third keys, an appropriate default size for the algorithm is used. + Each KSK/ZSK pair must have the same algorithm. A CSK combines the + functionality of a ZSK and a KSK. + +.. namedconf:statement:: purge-keys + :tags: dnssec + :short: Specifies the amount of time after which DNSSEC keys that have been deleted from the zone can be removed from disk. + + This is the amount of time after which DNSSEC keys that have been deleted from + the zone can be removed from disk. If a key still determined to have + presence (for example in some resolver cache), :iscman:`named` will not + remove the key files. + + The default is ``P90D`` (90 days). Set this option to ``0`` to never + purge deleted keys. + +.. namedconf:statement:: publish-safety + :tags: dnssec + :short: Increases the amount of time between when keys are published and when they become active, to allow for unforeseen events. + + This is a margin that is added to the pre-publication interval in + rollover timing calculations, to give some extra time to cover + unforeseen events. This increases the time between when keys are + published and when they become active. The default is ``PT1H`` (1 + hour). + +.. namedconf:statement:: retire-safety + :tags: dnssec + :short: Increases the amount of time a key remains published after it is no longer active, to allow for unforeseen events. + + This is a margin that is added to the post-publication interval in + rollover timing calculations, to give some extra time to cover + unforeseen events. This increases the time a key remains published + after it is no longer active. The default is ``PT1H`` (1 hour). + +.. namedconf:statement:: signatures-refresh + :tags: dnssec + :short: Specifies how frequently an RRSIG record is refreshed. + + This determines how frequently an RRSIG record needs to be + refreshed. The signature is renewed when the time until the + expiration time is less than the specified interval. The default is + ``P5D`` (5 days), meaning signatures that expire in 5 days or sooner + are refreshed. The :any:`signatures-refresh` value must be less than + 90% of the minimum value of :any:`signatures-validity` and + :any:`signatures-validity-dnskey`. + +.. namedconf:statement:: signatures-validity + :tags: dnssec + :short: Indicates the validity period of an RRSIG record. + + This indicates the validity period of an RRSIG record (subject to + inception offset and jitter). The default is ``P2W`` (2 weeks). + +.. namedconf:statement:: signatures-validity-dnskey + :tags: dnssec + :short: Indicates the validity period of DNSKEY records. + + This is similar to :any:`signatures-validity`, but for DNSKEY records. + The default is ``P2W`` (2 weeks). + +.. namedconf:statement:: max-zone-ttl + :tags: zone, query + :short: Specifies a maximum permissible time-to-live (TTL) value, in seconds. + + This specifies the maximum permissible TTL value for the zone. When + a zone file is loaded, any record encountered with a TTL higher than + :any:`max-zone-ttl` causes the zone to be rejected. + + This ensures that when rolling to a new DNSKEY, the old key will remain + available until RRSIG records have expired from caches. The + :any:`max-zone-ttl` option guarantees that the largest TTL in the + zone is no higher than a known and predictable value. + + The default value ``PT24H`` (24 hours). A value of zero is treated + as if the default value were in use. + + +.. namedconf:statement:: nsec3param + :tags: dnssec + :short: Specifies the use of NSEC3 instead of NSEC, and sets NSEC3 parameters. + + Use NSEC3 instead of NSEC, and optionally set the NSEC3 parameters. + + Here is an example of an ``nsec3`` configuration: + + :: + + nsec3param iterations 0 optout no salt-length 0; + + The default is to use :ref:`NSEC`. The ``iterations``, ``optout``, and + ``salt-length`` parts are optional, but if not set, the values in + the example above are the default :ref:`NSEC3` parameters. Note that the + specific salt string is not specified by the user; :iscman:`named` creates a salt + of the indicated length. + + .. warning:: + Do not use extra :term:`iterations <Iterations>`, :term:`salt <Salt>`, and + :term:`opt-out <Opt-out>` unless their implications are fully understood. + A higher number of iterations causes interoperability problems and opens + servers to CPU-exhausting DoS attacks. + +.. namedconf:statement:: zone-propagation-delay + :tags: dnssec, zone + :short: Sets the propagation delay from the time a zone is first updated to when the new version of the zone is served by all secondary servers. + + This is the expected propagation delay from the time when a zone is + first updated to the time when the new version of the zone is served + by all secondary servers. The default is ``PT5M`` (5 minutes). + +.. namedconf:statement:: parent-ds-ttl + :tags: dnssec + :short: Sets the time to live (TTL) of the DS RRset used by the parent zone. + + This is the TTL of the DS RRset that the parent zone uses. The + default is ``P1D`` (1 day). + +.. namedconf:statement:: parent-propagation-delay + :tags: dnssec, zone + :short: Sets the propagation delay from the time the parent zone is updated to when the new version is served by all of the parent zone's name servers. + + This is the expected propagation delay from the time when the parent + zone is updated to the time when the new version is served by all of + the parent zone's name servers. The default is ``PT1H`` (1 hour). + +Automated KSK Rollovers +^^^^^^^^^^^^^^^^^^^^^^^ + +BIND has mechanisms in place to facilitate automated KSK rollovers. It +publishes CDS and CDNSKEY records that can be used by the parent zone to +publish or withdraw the zone's DS records. BIND will query the parental +agents to see if the new DS is actually published before withdrawing the +old DNSSEC key. + + .. note:: + The DS response is not validated so it is recommended to set up a + trust relationship with the parental agent. For example, use TSIG to + authenticate the parental agent, or point to a validating resolver. + +The following options apply to DS queries sent to :any:`parental-agents`: + +.. namedconf:statement:: parental-source + :tags: dnssec + :short: Specifies which local IPv4 source address is used to send parental DS queries. + + :any:`parental-source` determines which local source address, and optionally + UDP port, is used to send parental DS queries. This statement sets the + :any:`parental-source` for all zones, but can be overridden on a per-zone or + per-view basis by including a :any:`parental-source` statement within the + :any:`zone` or :any:`view` block in the configuration file. + + .. note:: ``port`` configuration is deprecated. A warning will be logged + when this parameter is used. + + .. warning:: Specifying a single port is discouraged, as it removes a layer of + protection against spoofing errors. + + .. warning:: The configured :term:`port` must not be the same as the listening port. + +.. namedconf:statement:: parental-source-v6 + :tags: dnssec + :short: Specifies which local IPv6 source address is used to send parental DS queries. + + This option acts like :any:`parental-source`, but applies to parental DS + queries sent to IPv6 addresses. + +:any:`managed-keys` Block Grammar +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: managed-keys + :tags: deprecated + :short: Deprecated, use :any:`trust-anchors`. + +:any:`managed-keys` Block Definition and Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The :any:`managed-keys` statement has been +deprecated in favor of :any:`trust-anchors` +with the ``initial-key`` keyword. + +:any:`trusted-keys` Block Grammar +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: trusted-keys + :tags: deprecated + :short: Deprecated, use :any:`trust-anchors`. + +:any:`trusted-keys` Block Definition and Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The :any:`trusted-keys` statement has been deprecated in favor of +:any:`trust-anchors` with the ``static-key`` keyword. + +:any:`view` Block Grammar +~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: view + :tags: view + :short: Allows a name server to answer a DNS query differently depending on who is asking. + +:: + + view view_name [ class ] { + match-clients { address_match_list } ; + match-destinations { address_match_list } ; + match-recursive-only <boolean> ; + [ view_option ; ... ] + [ zone_statement ; ... ] + } ; + +:any:`view` Block Definition and Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The :any:`view` statement is a powerful feature of BIND 9 that lets a name +server answer a DNS query differently depending on who is asking. It is +particularly useful for implementing split DNS setups without having to +run multiple servers. + +.. namedconf:statement:: match-clients + :tags: view + :short: Specifies a view of DNS namespace for a given subset of client IP addresses. + +.. namedconf:statement:: match-destinations + :tags: view + :short: Specifies a view of DNS namespace for a given subset of destination IP addresses. + + Each :any:`view` statement defines a view of the DNS namespace that is + seen by a subset of clients. A client matches a view if its source IP + address matches the :term:`address_match_list` of the view's + :any:`match-clients` clause, and its destination IP address matches the + :term:`address_match_list` of the view's :any:`match-destinations` clause. If + not specified, both :any:`match-clients` and :any:`match-destinations` default + to matching all addresses. In addition to checking IP addresses, + :any:`match-clients` and :any:`match-destinations` can also take the name of a + TSIG :namedconf:ref:`key`, which provides a mechanism for the client to select + the view. + +.. namedconf:statement:: match-recursive-only + :tags: view + :short: Specifies that only recursive requests can match this view of the DNS namespace. + + A view can + also be specified as :any:`match-recursive-only`, which means that only + recursive requests from matching clients match that view. The order + of the :any:`view` statements is significant; a client request is + resolved in the context of the first :any:`view` that it matches. + +Zones defined within a :any:`view` statement are only accessible to +clients that match the :any:`view`. By defining a zone of the same name in +multiple views, different zone data can be given to different clients: +for example, "internal" and "external" clients in a split DNS setup. + +Many of the options given in the :namedconf:ref:`options` statement can also be used +within a :any:`view` statement, and then apply only when resolving queries +with that view. When no view-specific value is given, the value in the +:namedconf:ref:`options` statement is used as a default. Also, zone options can have +default values specified in the :any:`view` statement; these view-specific +defaults take precedence over those in the :namedconf:ref:`options` statement. + +Views are class-specific. If no class is given, class IN is assumed. +Note that all non-IN views must contain a hint zone, since only the IN +class has compiled-in default hints. + +If there are no :any:`view` statements in the config file, a default view +that matches any client is automatically created in class IN. Any +:any:`zone` statements specified on the top level of the configuration file +are considered to be part of this default view, and the :namedconf:ref:`options` +statement applies to the default view. If any explicit :any:`view` +statements are present, all :any:`zone` statements must occur inside +:any:`view` statements. + +Here is an example of a typical split DNS setup implemented using +:any:`view` statements: + +:: + + view "internal" { + // This should match our internal networks. + match-clients { 10.0.0.0/8; }; + + // Provide recursive service to internal + // clients only. + recursion yes; + + // Provide a complete view of the example.com + // zone including addresses of internal hosts. + zone "example.com" { + type primary; + file "example-internal.db"; + }; + }; + + view "external" { + // Match all clients not matched by the + // previous view. + match-clients { any; }; + + // Refuse recursive service to external clients. + recursion no; + + // Provide a restricted view of the example.com + // zone containing only publicly accessible hosts. + zone "example.com" { + type primary; + file "example-external.db"; + }; + }; + +:any:`zone` Block Grammar +~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statement:: zone + :tags: zone + :short: Specifies the zone in a BIND 9 configuration. + :suppress_grammar: + +:any:`zone` Block Definition and Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Zone Types +^^^^^^^^^^ +.. namedconf:statement:: type + :tags: zone + :short: Specifies the kind of zone in a given configuration. + :suppress_grammar: + + The :any:`type` keyword is required for the :any:`zone` configuration unless + it is an :any:`in-view` configuration. Its acceptable values are: + :any:`primary <type primary>` (or ``master``), :any:`secondary <type + secondary>` (or ``slave``), :any:`mirror <type mirror>`, :any:`hint <type + hint>`, :any:`stub <type stub>`, :any:`static-stub <type static-stub>`, + :any:`forward <type forward>`, :any:`redirect <type redirect>`, or + :any:`delegation-only <type delegation-only>`. + +.. namedconf:statement:: type primary + :tags: zone + :short: Contains the main copy of the data for a zone. + + A primary zone has a master copy of the data for the zone and is able + to provide authoritative answers for it. Type ``master`` is a synonym + for :any:`primary <type primary>`. + +.. namedconf:statement:: type secondary + :tags: zone + :short: Contains a duplicate of the data for a zone that has been transferred from a primary server. + + A secondary zone is a replica of a primary zone. Type ``slave`` is a + synonym for :any:`secondary <type secondary>`. The :any:`primaries` list specifies one or more IP + addresses of primary servers that the secondary contacts to update + its copy of the zone. Primaries list elements can + also be names of other primaries lists. By default, + transfers are made from port 53 on the servers; + this can be changed for all servers by specifying + a port number before the list of IP addresses, + or on a per-server basis after the IP address. + Authentication to the primary can also be done with + per-server TSIG keys. If a file is specified, then the + replica is written to this file + whenever the zone + is changed, and reloaded from this file on a server + restart. Use of a file is recommended, since it + often speeds server startup and eliminates a + needless waste of bandwidth. Note that for large + numbers (in the tens or hundreds of thousands) of + zones per server, it is best to use a two-level + naming scheme for zone filenames. For example, + a secondary server for the zone + ``example.com`` might place + the zone contents into a file called + ``ex/example.com``, where + ``ex/`` is just the first two + letters of the zone name. (Most operating systems + behave very slowly if there are 100,000 files in a single directory.) + +.. namedconf:statement:: type mirror + :tags: zone + :short: Contains a DNSSEC-validated duplicate of the main data for a zone. + + A mirror zone is similar to a zone of :any:`type secondary`, except its + data is subject to DNSSEC validation before being used in answers. + Validation is applied to the entire zone during the zone transfer + process, and again when the zone file is loaded from disk upon + restarting :iscman:`named`. If validation of a new version of a mirror zone + fails, a retransfer is scheduled; in the meantime, the most recent + correctly validated version of that zone is used until it either + expires or a newer version validates correctly. If no usable zone + data is available for a mirror zone, due to either transfer failure + or expiration, traditional DNS recursion is used to look up the + answers instead. Mirror zones cannot be used in a view that does not + have recursion enabled. + + Answers coming from a mirror zone look almost exactly like answers + from a zone of :any:`type secondary`, with the notable exceptions that + the AA bit ("authoritative answer") is not set, and the AD bit + ("authenticated data") is. + + Mirror zones are intended to be used to set up a fast local copy of + the root zone (see :rfc:`8806`). A default list of primary servers + for the IANA root zone is built into :iscman:`named`, so its mirroring can + be enabled using the following configuration: + + :: + + zone "." { + type mirror; + }; + + Mirror zone validation always happens for the entire zone contents. + This ensures that each version of the zone used by the resolver is + fully self-consistent with respect to DNSSEC. For incoming mirror + zone IXFRs, every revision of the zone contained in the IXFR sequence + is validated independently, in the order in which the zone revisions + appear on the wire. For this reason, it might be useful to force use + of AXFR for mirror zones by setting ``request-ixfr no;`` for the + relevant zone (or view). Other, more efficient zone verification + methods may be added in the future. + + To make mirror zone contents persist between :iscman:`named` restarts, use + the :any:`file` option. + + Mirroring a zone other than root requires an explicit list of primary + servers to be provided using the :any:`primaries` option (see + :any:`primaries` for details), and a key-signing key (KSK) + for the specified zone to be explicitly configured as a trust anchor + (see :any:`trust-anchors`). + + When configuring NOTIFY for a mirror zone, only ``notify no;`` and + ``notify explicit;`` can be used at the zone level; any other + :namedconf:ref:`notify` setting at the zone level is a configuration error. Using + any other :namedconf:ref:`notify` setting at the :namedconf:ref:`options` or :any:`view` level + causes that setting to be overridden with ``notify explicit;`` for + the mirror zone. The global default for the :namedconf:ref:`notify` option is + ``yes``, so mirror zones are by default configured with ``notify + explicit;``. + + Outgoing transfers of mirror zones are disabled by default but may be + enabled using :any:`allow-transfer`. + + .. note:: + Use of this zone type with any zone other than the root should be + considered *experimental* and may cause performance issues, + especially for zones that are large and/or frequently updated. + +.. namedconf:statement:: type hint + :tags: zone + :short: Contains the initial set of root name servers to be used at BIND 9 startup. + + The initial set of root name servers is specified using a hint zone. + When the server starts, it uses the root hints to find a root name + server and get the most recent list of root name servers. If no hint zone + is specified for class IN, the server uses a compiled-in default set of + root servers hints. Classes other than IN have no built-in default hints. + +.. namedconf:statement:: type stub + :tags: zone + :short: Contains a duplicate of the NS records of a primary zone. + + A stub zone is similar to a secondary zone, except that it replicates only + the NS records of a primary zone instead of the entire zone. Stub zones + are not a standard part of the DNS; they are a feature specific to the + BIND implementation. + + Stub zones can be used to eliminate the need for a glue NS record in a parent + zone, at the expense of maintaining a stub zone entry and a set of name + server addresses in :iscman:`named.conf`. This usage is not recommended for + new configurations, and BIND 9 supports it only in a limited way. If a BIND 9 + primary, serving a parent zone, has child stub + zones configured, all the secondary servers for the parent zone also need to + have the same child stub zones configured. + + Stub zones can also be used as a way to force the resolution of a given + domain to use a particular set of authoritative servers. For example, the + caching name servers on a private network using :rfc:`1918` addressing may be + configured with stub zones for ``10.in-addr.arpa`` to use a set of + internal name servers as the authoritative servers for that domain. + +.. namedconf:statement:: type static-stub + :tags: zone + :short: Contains a duplicate of the NS records of a primary zone, but statically configured rather than transferred from a primary server. + + A static-stub zone is similar to a stub zone, with the following + exceptions: the zone data is statically configured, rather than + transferred from a primary server; and when recursion is necessary for a query + that matches a static-stub zone, the locally configured data (name server + names and glue addresses) is always used, even if different authoritative + information is cached. + + Zone data is configured via the :any:`server-addresses` and :any:`server-names` + zone options. + + The zone data is maintained in the form of NS and (if necessary) glue A or + AAAA RRs internally, which can be seen by dumping zone databases with + :option:`rndc dumpdb -all <rndc dumpdb>`. The configured RRs are considered local configuration + parameters rather than public data. Non-recursive queries (i.e., those + with the RD bit off) to a static-stub zone are therefore prohibited and + are responded to with REFUSED. + + Since the data is statically configured, no zone maintenance action takes + place for a static-stub zone. For example, there is no periodic refresh + attempt, and an incoming notify message is rejected with an rcode + of NOTAUTH. + + Each static-stub zone is configured with internally generated NS and (if + necessary) glue A or AAAA RRs. + +.. namedconf:statement:: type forward + :tags: zone + :short: Contains forwarding statements that apply to queries within a given domain. + + A forward zone is a way to configure forwarding on a per-domain basis. + A :any:`zone` statement of type :any:`forward` can contain a :any:`forward` and/or + :any:`forwarders` statement, which applies to queries within the domain + given by the zone name. If no :any:`forwarders` statement is present, or an + empty list for :any:`forwarders` is given, then no forwarding is done + for the domain, canceling the effects of any forwarders in the :namedconf:ref:`options` + statement. Thus, to use this type of zone to change the + behavior of the global :any:`forward` option (that is, "forward first" to, + then "forward only", or vice versa), but use the same servers as set + globally, re-specify the global forwarders. + +.. namedconf:statement:: type redirect + :tags: zone + :short: Contains information to answer queries when normal resolution would return NXDOMAIN. + + Redirect zones are used to provide answers to queries when normal + resolution would result in NXDOMAIN being returned. Only one redirect zone + is supported per view. :any:`allow-query` can be used to restrict which + clients see these answers. + + If the client has requested DNSSEC records (DO=1) and the NXDOMAIN response + is signed, no substitution occurs. + + To redirect all NXDOMAIN responses to 100.100.100.2 and + 2001:ffff:ffff::100.100.100.2, configure a type :any:`redirect <type redirect>` zone + named ".", with the zone file containing wildcard records that point to + the desired addresses: ``*. IN A 100.100.100.2`` and + ``*. IN AAAA 2001:ffff:ffff::100.100.100.2``. + + As another example, to redirect all Spanish names (under .ES), use similar entries + but with the names ``*.ES.`` instead of ``*.``. To redirect all commercial + Spanish names (under COM.ES), use wildcard entries + called ``*.COM.ES.``. + + Note that the redirect zone supports all possible types; it is not + limited to A and AAAA records. + + If a redirect zone is configured with a :any:`primaries` option, then it is + transferred in as if it were a secondary zone. Otherwise, it is loaded from a + file as if it were a primary zone. + + Because redirect zones are not referenced directly by name, they are not + kept in the zone lookup table with normal primary and secondary zones. To reload + a redirect zone, use :option:`rndc reload -redirect <rndc reload>`; to retransfer a + redirect zone configured as a secondary, use :option:`rndc retransfer -redirect <rndc retransfer>`. + When using :option:`rndc reload` without specifying a zone name, redirect + zones are reloaded along with other zones. + +.. namedconf:statement:: type delegation-only + :tags: deprecated + :short: Enforces the delegation-only status of infrastructure zones (COM, NET, ORG, etc.). + + This zone type is used to enforce the delegation-only status of + infrastructure zones (e.g., COM, NET, ORG). Any answer that is received + without an explicit or implicit delegation in the authority section is + treated as NXDOMAIN. This does not apply to the zone apex, and should + not be applied to leaf zones. + + :any:`delegation-only` has no effect on answers received from forwarders. + + See caveats in :any:`root-delegation-only`. + + This zone type is deprecated, and will be rendered non-operational in a + future release. + +.. namedconf:statement:: in-view + :tags: view, zone + :short: Specifies the view in which a given zone is defined. + + When using multiple views, a :any:`type primary` or :any:`type secondary` zone configured + in one view can be referenced in a subsequent view. This allows both views + to use the same zone without the overhead of loading it more than once. This + is configured using a :any:`zone` statement, with an :any:`in-view` option + specifying the view in which the zone is defined. A :any:`zone` statement + containing :any:`in-view` does not need to specify a type, since that is part + of the zone definition in the other view. + + See :ref:`multiple_views` for more information. + +Class +^^^^^ + +The zone's name may optionally be followed by a class. If a class is not +specified, class ``IN`` (for ``Internet``) is assumed. This is correct +for the vast majority of cases. + +The ``hesiod`` class is named for an information service from MIT's +Project Athena. It was used to share information about various systems +databases, such as users, groups, printers, and so on. The keyword ``HS`` +is a synonym for hesiod. + +Another MIT development is Chaosnet, a LAN protocol created in the +mid-1970s. Zone data for it can be specified with the ``CHAOS`` class. + +.. _zone_options: + +Zone Options +^^^^^^^^^^^^ + +:any:`allow-notify` + See the description of :any:`allow-notify` in :ref:`access_control`. + +:any:`allow-query` + See the description of :any:`allow-query` in :ref:`access_control`. + +:any:`allow-query-on` + See the description of :any:`allow-query-on` in :ref:`access_control`. + +:any:`allow-transfer` + See the description of :any:`allow-transfer` in :ref:`access_control`. + +:any:`allow-update` + See the description of :any:`allow-update` in :ref:`access_control`. + +:any:`update-policy` + This specifies a "Simple Secure Update" policy. See :ref:`dynamic_update_policies`. + +:any:`allow-update-forwarding` + See the description of :any:`allow-update-forwarding` in :ref:`access_control`. + +:any:`also-notify` + This option is only meaningful if :namedconf:ref:`notify` is active for this zone. The set of + machines that receive a ``DNS NOTIFY`` message for this zone is + made up of all the listed name servers (other than the primary) + for the zone, plus any IP addresses specified with + :any:`also-notify`. A port may be specified with each :any:`also-notify` + address to send the notify messages to a port other than the default + of 53. A TSIG key may also be specified to cause the ``NOTIFY`` to be + signed by the given key. :any:`also-notify` is not meaningful for stub + zones. The default is the empty list. + +:any:`check-names` + This option is used to restrict the character set and syntax of + certain domain names in primary files and/or DNS responses received + from the network. The default varies according to zone type. For + :any:`primary <type primary>` zones the default is ``fail``; for :any:`secondary <type secondary>` zones the + default is ``warn``. It is not implemented for :any:`hint <type hint>` zones. + +:any:`check-mx` + See the description of :any:`check-mx` in :ref:`boolean_options`. + +:any:`check-spf` + See the description of :any:`check-spf` in :ref:`boolean_options`. + +:any:`check-wildcard` + See the description of :any:`check-wildcard` in :ref:`boolean_options`. + +:any:`check-integrity` + See the description of :any:`check-integrity` in :ref:`boolean_options`. + +:any:`check-sibling` + See the description of :any:`check-sibling` in :ref:`boolean_options`. + +:any:`zero-no-soa-ttl` + See the description of :any:`zero-no-soa-ttl` in :ref:`boolean_options`. + +:any:`update-check-ksk` + See the description of :any:`update-check-ksk` in :ref:`boolean_options`. + +:any:`dnssec-loadkeys-interval` + See the description of :any:`dnssec-loadkeys-interval` in :namedconf:ref:`options`. + +:any:`dnssec-update-mode` + See the description of :any:`dnssec-update-mode` in :namedconf:ref:`options`. + +:any:`dnssec-dnskey-kskonly` + See the description of :any:`dnssec-dnskey-kskonly` in :ref:`boolean_options`. + +:any:`try-tcp-refresh` + See the description of :any:`try-tcp-refresh` in :ref:`boolean_options`. + +.. namedconf:statement:: database + :tags: zone + :short: Specifies the type of database to be used to store zone data. + + This specifies the type of database to be used to store the zone data. + The string following the :any:`database` keyword is interpreted as a + list of whitespace-delimited words. The first word identifies the + database type, and any subsequent words are passed as arguments to + the database to be interpreted in a way specific to the database + type. + + The default is ``rbt``, BIND 9's native in-memory red-black tree + database. This database does not take arguments. + + Other values are possible if additional database drivers have been + linked into the server. Some sample drivers are included with the + distribution but none are linked in by default. + +:any:`dialup` + See the description of :any:`dialup` in :ref:`boolean_options`. + +.. namedconf:statement:: delegation-only + :tags: deprecated + :short: Indicates that a forward, hint, or stub zone is to be treated as a delegation-only type zone. + + This flag only applies to forward, hint, and stub zones. If set to + ``yes``, then the zone is treated as if it is also a + delegation-only type zone. + + See caveats in :any:`root-delegation-only`. + + This option is deprecated, and will be rendered non-operational in a + future release. + +.. namedconf:statement:: file + :tags: zone + :short: Specifies the zone's filename. + + This sets the zone's filename. In :any:`primary <type primary>`, :any:`hint <type hint>`, and :any:`redirect <type redirect>` + zones which do not have :any:`primaries` defined, zone data is loaded from + this file. In :any:`secondary <type secondary>`, :any:`mirror <type mirror>`, :any:`stub <type stub>`, and :any:`redirect <type redirect>` zones + which do have :any:`primaries` defined, zone data is retrieved from + another server and saved in this file. This option is not applicable + to other zone types. + +:any:`forward` + This option is only meaningful if the zone has a forwarders list. The ``only`` value + causes the lookup to fail after trying the forwarders and getting no + answer, while ``first`` allows a normal lookup to be tried. + +:any:`forwarders` + This is used to override the list of global forwarders. If it is not + specified in a zone of type :any:`forward`, no forwarding is done for + the zone and the global options are not used. + +.. namedconf:statement:: journal + :tags: zone + :short: Allows the default journal's filename to be overridden. + + This allows the default journal's filename to be overridden. The default is + the zone's filename with "``.jnl``" appended. This is applicable to + :any:`primary <type primary>` and :any:`secondary <type secondary>` zones. + +:any:`max-ixfr-ratio` + See the description of :any:`max-ixfr-ratio` in :namedconf:ref:`options`. + +:any:`max-journal-size` + See the description of :any:`max-journal-size` in :ref:`server_resource_limits`. + +:any:`max-records` + See the description of :any:`max-records` in :ref:`server_resource_limits`. + +:any:`max-transfer-time-in` + See the description of :any:`max-transfer-time-in` in :ref:`zone_transfers`. + +:any:`max-transfer-idle-in` + See the description of :any:`max-transfer-idle-in` in :ref:`zone_transfers`. + +:any:`max-transfer-time-out` + See the description of :any:`max-transfer-time-out` in :ref:`zone_transfers`. + +:any:`max-transfer-idle-out` + See the description of :any:`max-transfer-idle-out` in :ref:`zone_transfers`. + +:namedconf:ref:`notify` + See the description of :namedconf:ref:`notify` in :ref:`boolean_options`. + +:any:`notify-delay` + See the description of :any:`notify-delay` in :ref:`tuning`. + +:any:`notify-to-soa` + See the description of :any:`notify-to-soa` in :ref:`boolean_options`. + +:any:`zone-statistics` + See the description of :any:`zone-statistics` in :namedconf:ref:`options`. + +.. namedconf:statement:: server-addresses + :tags: query, zone + :short: Specifies a list of IP addresses to which queries should be sent in recursive resolution for a static-stub zone. + + This option is only meaningful for static-stub zones. This is a list of IP addresses + to which queries should be sent in recursive resolution for the zone. + A non-empty list for this option internally configures the apex + NS RR with associated glue A or AAAA RRs. + + For example, if "example.com" is configured as a static-stub zone + with 192.0.2.1 and 2001:db8::1234 in a :any:`server-addresses` option, + the following RRs are internally configured: + + :: + + example.com. NS example.com. + example.com. A 192.0.2.1 + example.com. AAAA 2001:db8::1234 + + These records are used internally to resolve names under the + static-stub zone. For instance, if the server receives a query for + "www.example.com" with the RD bit on, the server initiates + recursive resolution and sends queries to 192.0.2.1 and/or + 2001:db8::1234. + +.. namedconf:statement:: server-names + :tags: zone + :short: Specifies a list of domain names of name servers that act as authoritative servers of a static-stub zone. + + This option is only meaningful for static-stub zones. This is a list of domain names + of name servers that act as authoritative servers of the static-stub + zone. These names are resolved to IP addresses when :iscman:`named` + needs to send queries to these servers. For this supplemental + resolution to be successful, these names must not be a subdomain of the + origin name of the static-stub zone. That is, when "example.net" is the + origin of a static-stub zone, "ns.example" and "master.example.com" + can be specified in the :any:`server-names` option, but "ns.example.net" + cannot; it is rejected by the configuration parser. + + A non-empty list for this option internally configures the apex + NS RR with the specified names. For example, if "example.com" is + configured as a static-stub zone with "ns1.example.net" and + "ns2.example.net" in a :any:`server-names` option, the following RRs + are internally configured: + + :: + + example.com. NS ns1.example.net. + example.com. NS ns2.example.net. + + These records are used internally to resolve names under the + static-stub zone. For instance, if the server receives a query for + "www.example.com" with the RD bit on, the server initiates recursive + resolution, resolves "ns1.example.net" and/or "ns2.example.net" to IP + addresses, and then sends queries to one or more of these addresses. + +:any:`sig-validity-interval` + See the description of :any:`sig-validity-interval` in :ref:`tuning`. + +:any:`sig-signing-nodes` + See the description of :any:`sig-signing-nodes` in :ref:`tuning`. + +:any:`sig-signing-signatures` + See the description of :any:`sig-signing-signatures` in + :ref:`tuning`. + +:any:`sig-signing-type` + See the description of :any:`sig-signing-type` in :ref:`tuning`. + +:any:`transfer-source` + See the description of :any:`transfer-source` in :ref:`zone_transfers`. + +:any:`transfer-source-v6` + See the description of :any:`transfer-source-v6` in :ref:`zone_transfers`. + +:any:`alt-transfer-source` + See the description of :any:`alt-transfer-source` in :ref:`zone_transfers`. + +:any:`alt-transfer-source-v6` + See the description of :any:`alt-transfer-source-v6` in :ref:`zone_transfers`. + +:any:`use-alt-transfer-source` + See the description of :any:`use-alt-transfer-source` in :ref:`zone_transfers`. + +:any:`notify-source` + See the description of :any:`notify-source` in :ref:`zone_transfers`. + +:any:`notify-source-v6` + See the description of :any:`notify-source-v6` in :ref:`zone_transfers`. + +:any:`min-refresh-time`; :any:`max-refresh-time`; :any:`min-retry-time`; :any:`max-retry-time` + See the descriptions in :ref:`tuning`. + +:any:`ixfr-from-differences` + See the description of :any:`ixfr-from-differences` in :ref:`boolean_options`. + (Note that the :any:`ixfr-from-differences` choices of :any:`primary <type primary>` and :any:`secondary <type secondary>` + are not available at the zone level.) + +:any:`key-directory` + See the description of :any:`key-directory` in :namedconf:ref:`options`. + +:any:`auto-dnssec` + See the description of :any:`auto-dnssec` in :namedconf:ref:`options`. + +:any:`serial-update-method` + See the description of :any:`serial-update-method` in :namedconf:ref:`options`. + +.. namedconf:statement:: inline-signing + :tags: dnssec, zone + :short: Specifies whether BIND 9 maintains a separate signed version of a zone. + + If ``yes``, BIND 9 maintains a separate signed version of the zone. + An unsigned zone is transferred in or loaded from disk and the signed + version of the zone is served with, possibly, a different serial + number. The signed version of the zone is stored in a file that is + the zone's filename (set in :any:`file`) with a ``.signed`` extension. + This behavior is disabled by default. + +:any:`multi-master` + See the description of :any:`multi-master` in :ref:`boolean_options`. + +:any:`masterfile-format` + See the description of :any:`masterfile-format` in :ref:`tuning`. + +:any:`max-zone-ttl` + See the description of :any:`max-zone-ttl` in :namedconf:ref:`options`. + The use of this option in :any:`zone` blocks is deprecated and + will be rendered nonoperational in a future release. + +:any:`dnssec-secure-to-insecure` + See the description of :any:`dnssec-secure-to-insecure` in :ref:`boolean_options`. + +.. _dynamic_update_policies: + +Dynamic Update Policies +^^^^^^^^^^^^^^^^^^^^^^^ + +BIND 9 supports two methods of granting clients the right to +perform dynamic updates to a zone: + +- :namedconf:ref:`allow-update` - a simple access control list +- :namedconf:ref:`update-policy` - fine-grained access control + +In both cases, BIND 9 writes the updates to the zone's filename +set in :any:`file`. + +In the case of a DNSSEC zone, DNSSEC records are also written to +the zone's filename, unless :any:`inline-signing` is enabled. + + .. note:: The zone file can no longer be manually updated while ``named`` + is running; it is now necessary to perform :option:`rndc freeze`, edit, + and then perform :option:`rndc thaw`. Comments and formatting + in the zone file are lost when dynamic updates occur. + +.. namedconf:statement:: update-policy + :tags: transfer + :short: Sets fine-grained rules to allow or deny dynamic updates (DDNS), based on requester identity, updated content, etc. + + The :any:`update-policy` clause allows more fine-grained control over which + updates are allowed. It specifies a set of rules, in which each rule + either grants or denies permission for one or more names in the zone to + be updated by one or more identities. Identity is determined by the key + that signed the update request, using either TSIG or SIG(0). In most + cases, :any:`update-policy` rules only apply to key-based identities. There + is no way to specify update permissions based on the client source address. + + :any:`update-policy` rules are only meaningful for zones of + :any:`type primary`, and are not allowed in any other zone type. It is a + configuration error to specify both :any:`allow-update` and + :any:`update-policy` at the same time. + + A pre-defined :any:`update-policy` rule can be switched on with the command + ``update-policy local;``. :iscman:`named` automatically + generates a TSIG session key when starting and stores it in a file; + this key can then be used by local clients to update the zone while + :iscman:`named` is running. By default, the session key is stored in the file + |session_key|, the key name is "local-ddns", and the + key algorithm is HMAC-SHA256. These values are configurable with the + :any:`session-keyfile`, :any:`session-keyname`, and :any:`session-keyalg` options, + respectively. A client running on the local system, if run with + appropriate permissions, may read the session key from the key file and + use it to sign update requests. The zone's update policy is set to + allow that key to change any record within the zone. Assuming the key + name is "local-ddns", this policy is equivalent to: + + :: + + update-policy { grant local-ddns zonesub any; }; + + with the additional restriction that only clients connecting from the + local system are permitted to send updates. + + Note that only one session key is generated by :iscman:`named`; all zones + configured to use ``update-policy local`` accept the same key. + + The command ``nsupdate -l`` implements this feature, sending requests to + localhost and signing them using the key retrieved from the session key + file. + + Other rule definitions look like this: + + :: + + ( grant | deny ) identity ruletype name types + + Each rule grants or denies privileges. Rules are checked in the order in + which they are specified in the :any:`update-policy` statement. Once a + message has successfully matched a rule, the operation is immediately + granted or denied, and no further rules are examined. There are 16 types + of rules; the rule type is specified by the ``ruletype`` field, and the + interpretation of other fields varies depending on the rule type. + + In general, a rule is matched when the key that signed an update request + matches the ``identity`` field, the name of the record to be updated + matches the ``name`` field (in the manner specified by the ``ruletype`` + field), and the type of the record to be updated matches the ``types`` + field. Details for each rule type are described below. + + The ``identity`` field must be set to a fully qualified domain name. In + most cases, this represents the name of the TSIG or SIG(0) key that + must be used to sign the update request. If the specified name is a + wildcard, it is subject to DNS wildcard expansion, and the rule may + apply to multiple identities. When a TKEY exchange has been used to + create a shared secret, the identity of the key used to authenticate the + TKEY exchange is used as the identity of the shared secret. Some + rule types use identities matching the client's Kerberos principal (e.g, + ``"host/machine@REALM"``) or Windows realm (``machine$@REALM``). + + The ``name`` field also specifies a fully qualified domain name. This often + represents the name of the record to be updated. Interpretation of this + field is dependent on rule type. + + If no ``types`` are explicitly specified, then a rule matches all types + except RRSIG, NS, SOA, NSEC, and NSEC3. Types may be specified by name, + including ``ANY``; ANY matches all types except NSEC and NSEC3, which can + never be updated. Note that when an attempt is made to delete all + records associated with a name, the rules are checked for each existing + record type. + + If the type is immediately followed by a number in parentheses, + that number is the maximum number of records of that type permitted + to exist in the RRset after an update has been applied. For example, + ``PTR(1)`` indicates that only one PTR record is allowed. If an + attempt is made to add two PTR records in an update, the second one + is silently discarded. If a PTR record already exists, both + new records are silently discarded. + + If type ANY is specified with a limit, then that limit applies to + all types that are not otherwise specified. For example, ``A PTR(1) + ANY(2)`` indicates that an unlimited number of A records can exist, + but only one PTR record, and no more than two of any other type. + + Typical use with a rule ``grant * tcp-self . PTR(1);`` in the zone + 2.0.192.IN-ADDR.ARPA looks like this: + + :: + + nsupdate -v <<EOF + local 192.0.2.1 + del 1.2.0.192.IN-ADDR.ARPA PTR + add 1.2.0.192.IN-ADDR.ARPA 0 PTR EXAMPLE.COM + send + EOF + + The ruletype field has 20 values: ``name``, ``subdomain``, ``zonesub``, + ``wildcard``, ``self``, ``selfsub``, ``selfwild``, ``ms-self``, + ``ms-selfsub``, ``ms-subdomain``, ``ms-subdomain-self-rhs``, ``krb5-self``, + ``krb5-selfsub``, ``krb5-subdomain``, ``krb5-subdomain-self-rhs``, + ``tcp-self``, ``6to4-self``, and ``external``. + + ``name`` + With exact-match semantics, this rule matches when the name being updated is identical to the contents of the ``name`` field. + + ``subdomain`` + This rule matches when the name being updated is a subdomain of, or identical to, the contents of the ``name`` field. + + ``zonesub`` + This rule is similar to subdomain, except that it matches when the name being updated is a subdomain of the zone in which the :any:`update-policy` statement appears. This obviates the need to type the zone name twice, and enables the use of a standard :any:`update-policy` statement in multiple zones without modification. + When this rule is used, the ``name`` field is omitted. + + ``wildcard`` + The ``name`` field is subject to DNS wildcard expansion, and this rule matches when the name being updated is a valid expansion of the wildcard. + + ``self`` + This rule matches when the name of the record being updated matches the contents of the ``identity`` field. The ``name`` field is ignored. To avoid confusion, it is recommended that this field be set to the same value as the ``identity`` field or to "." + The ``self`` rule type is most useful when allowing one key per name to update, where the key has the same name as the record to be updated. In this case, the ``identity`` field can be specified as ``*`` (asterisk). + + ``selfsub`` + This rule is similar to ``self``, except that subdomains of ``self`` can also be updated. + + ``selfwild`` + This rule is similar to ``self``, except that only subdomains of ``self`` can be updated. + + ``ms-self`` + When a client sends an UPDATE using a Windows machine principal (for example, ``machine$@REALM``), this rule allows records with the absolute name of ``machine.REALM`` to be updated. + + The realm to be matched is specified in the ``identity`` field. + + The ``name`` field has no effect on this rule; it should be set to "." as a placeholder. + + For example, ``grant EXAMPLE.COM ms-self . A AAAA`` allows any machine with a valid principal in the realm ``EXAMPLE.COM`` to update its own address records. + + ``ms-selfsub`` + This is similar to ``ms-self``, except it also allows updates to any subdomain of the name specified in the Windows machine principal, not just to the name itself. + + ``ms-subdomain`` + When a client sends an UPDATE using a Windows machine principal (for example, ``machine$@REALM``), this rule allows any machine in the specified realm to update any record in the zone or in a specified subdomain of the zone. + + The realm to be matched is specified in the ``identity`` field. + + The ``name`` field specifies the subdomain that may be updated. If set to "." or any other name at or above the zone apex, any name in the zone can be updated. + + For example, if :any:`update-policy` for the zone "example.com" includes ``grant EXAMPLE.COM ms-subdomain hosts.example.com. AA AAAA``, any machine with a valid principal in the realm ``EXAMPLE.COM`` is able to update address records at or below ``hosts.example.com``. + + ``ms-subdomain-self-rhs`` + This rule is similar to ``ms-subdomain``, with an additional + restriction that PTR and SRV target names must match the name of the + machine identified in the principal. + + ``krb5-self`` + When a client sends an UPDATE using a Kerberos machine principal (for example, ``host/machine@REALM``), this rule allows records with the absolute name of ``machine`` to be updated, provided it has been authenticated by REALM. This is similar but not identical to ``ms-self``, due to the ``machine`` part of the Kerberos principal being an absolute name instead of an unqualified name. + + The realm to be matched is specified in the ``identity`` field. + + The ``name`` field has no effect on this rule; it should be set to "." as a placeholder. + + For example, ``grant EXAMPLE.COM krb5-self . A AAAA`` allows any machine with a valid principal in the realm ``EXAMPLE.COM`` to update its own address records. + + ``krb5-selfsub`` + This is similar to ``krb5-self``, except it also allows updates to any subdomain of the name specified in the ``machine`` part of the Kerberos principal, not just to the name itself. + + ``krb5-subdomain`` + This rule is identical to ``ms-subdomain``, except that it works with Kerberos machine principals (i.e., ``host/machine@REALM``) rather than Windows machine principals. + + ``krb5-subdomain-self-rhs`` + This rule is similar to ``krb5-subdomain``, with an additional + restriction that PTR and SRV target names must match the name of the + machine identified in the principal. + + ``tcp-self`` + This rule allows updates that have been sent via TCP and for which the standard mapping from the client's IP address into the ``in-addr.arpa`` and ``ip6.arpa`` namespaces matches the name to be updated. The ``identity`` field must match that name. The ``name`` field should be set to ".". Note that, since identity is based on the client's IP address, it is not necessary for update request messages to be signed. + + .. note:: + It is theoretically possible to spoof these TCP sessions. + + ``6to4-self`` + This allows the name matching a 6to4 IPv6 prefix, as specified in :rfc:`3056`, to be updated by any TCP connection from either the 6to4 network or from the corresponding IPv4 address. This is intended to allow NS or DNAME RRsets to be added to the ``ip6.arpa`` reverse tree. + + The ``identity`` field must match the 6to4 prefix in ``ip6.arpa``. The ``name`` field should be set to ".". Note that, since identity is based on the client's IP address, it is not necessary for update request messages to be signed. + + In addition, if specified for an ``ip6.arpa`` name outside of the ``2.0.0.2.ip6.arpa`` namespace, the corresponding /48 reverse name can be updated. For example, TCP/IPv6 connections from 2001:DB8:ED0C::/48 can update records at ``C.0.D.E.8.B.D.0.1.0.0.2.ip6.arpa``. + + .. note:: + It is theoretically possible to spoof these TCP sessions. + + ``external`` + This rule allows :iscman:`named` to defer the decision of whether to allow a given update to an external daemon. + + The method of communicating with the daemon is specified in the ``identity`` field, the format of which is "``local:``\ path", where "path" is the location of a Unix-domain socket. (Currently, "local" is the only supported mechanism.) + + Requests to the external daemon are sent over the Unix-domain socket as datagrams with the following format: + + :: + + Protocol version number (4 bytes, network byte order, currently 1) + Request length (4 bytes, network byte order) + Signer (null-terminated string) + Name (null-terminated string) + TCP source address (null-terminated string) + Rdata type (null-terminated string) + Key (null-terminated string) + TKEY token length (4 bytes, network byte order) + TKEY token (remainder of packet) + + The daemon replies with a four-byte value in network byte order, containing either 0 or 1; 0 indicates that the specified update is not permitted, and 1 indicates that it is. + + .. warning:: The external daemon must not delay communication. This policy is evaluated synchronously; any wait period negatively affects :iscman:`named` performance. + +.. _multiple_views: + +Multiple Views +^^^^^^^^^^^^^^ + +When multiple views are in use, a zone may be referenced by more than +one of them. Often, the views contain different zones with the same +name, allowing different clients to receive different answers for the +same queries. At times, however, it is desirable for multiple views to +contain identical zones. The :any:`in-view` zone option provides an +efficient way to do this; it allows a view to reference a zone that was +defined in a previously configured view. For example: + +:: + + view internal { + match-clients { 10/8; }; + + zone example.com { + type primary; + file "example-external.db"; + }; + }; + + view external { + match-clients { any; }; + + zone example.com { + in-view internal; + }; + }; + +An :any:`in-view` option cannot refer to a view that is configured later in +the configuration file. + +A :any:`zone` statement which uses the :any:`in-view` option may not use any +other options, with the exception of :any:`forward` and :any:`forwarders`. +(These options control the behavior of the containing view, rather than +change the zone object itself.) + +Zone-level ACLs (e.g., allow-query, allow-transfer), and other +configuration details of the zone, are all set in the view the referenced +zone is defined in. Be careful to ensure that ACLs are wide +enough for all views referencing the zone. + +An :any:`in-view` zone cannot be used as a response policy zone. + +An :any:`in-view` zone is not intended to reference a :any:`forward` zone. + +Statements +---------- +BIND 9 supports many hundreds of statements; finding the right statement to +control a specific behavior or solve a particular problem can be a daunting +task. To simplify the task for users, all statements have been assigned one or more tags. +Tags are designed to group together statements that have broadly similar +functionality; thus, for example, all statements that control the handling of +queries or of zone transfers are respectively tagged under **query** and **transfer**. + +:ref:`dnssec_tag_statements` are those that relate to or control DNSSEC. + +:ref:`logging_tag_statements` relate to or control logging, and typically only +appear in a logging block. + +:ref:`query_tag_statements` relate to or control queries. + +:ref:`security_tag_statements` relate to or control security features. + +:ref:`server_tag_statements` relate to or control server behavior, and typically +only appear in a server block. + +:ref:`transfer_tag_statements` relate to or control zone transfers. + +:ref:`view_tag_statements` relate to or control view selection criteria, and +typically only appear in a view block. + +:ref:`zone_tag_statements` relate to or control zone behavior, and typically +only appear in a zone block. + +:ref:`deprecated_tag_statements` are those that are now deprecated, but are +included here for historical reference. + +The following table lists all statements permissible in :file:`named.conf`, with their +associated tags; the next section groups the statements by tag. Please note that these +sections are a work in progress. + +.. namedconf:statementlist:: + +Statements by Tag +----------------- +These tables group the various statements permissible in :file:`named.conf` by +their corresponding tag. + +.. _dnssec_tag_statements: + +DNSSEC Tag Statements +~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statementlist:: + :filter_tags: dnssec + +.. _logging_tag_statements: + +Logging Tag Statements +~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statementlist:: + :filter_tags: logging + +.. _query_tag_statements: + +Query Tag Statements +~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statementlist:: + :filter_tags: query + +.. _security_tag_statements: + +Security Tag Statements +~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statementlist:: + :filter_tags: security + +.. _server_tag_statements: + +Server Tag Statements +~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statementlist:: + :filter_tags: server + +.. _transfer_tag_statements: + +Transfer Tag Statements +~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statementlist:: + :filter_tags: transfer + +.. _view_tag_statements: + +View Tag Statements +~~~~~~~~~~~~~~~~~~~ +.. namedconf:statementlist:: + :filter_tags: view + +.. _zone_tag_statements: + +Zone Tag Statements +~~~~~~~~~~~~~~~~~~~ +.. namedconf:statementlist:: + :filter_tags: zone + +.. _deprecated_tag_statements: + +Deprecated Tag Statements +~~~~~~~~~~~~~~~~~~~~~~~~~ +.. namedconf:statementlist:: + :filter_tags: deprecated + +.. _statistics: + +BIND 9 Statistics +----------------- + +BIND 9 maintains lots of statistics information and provides several +interfaces for users to access those statistics. The available +statistics include all statistics counters that are meaningful in BIND 9, +and other information that is considered useful. + +The statistics information is categorized into the following sections: + +Incoming Requests + The number of incoming DNS requests for each OPCODE. + +Incoming Queries + The number of incoming queries for each RR type. + +Outgoing Queries + The number of outgoing queries for each RR type sent from the internal + resolver, maintained per view. + +Name Server Statistics + Statistics counters for incoming request processing. + +Zone Maintenance Statistics + Statistics counters regarding zone maintenance operations, such as zone + transfers. + +Resolver Statistics + Statistics counters for name resolutions performed in the internal resolver, + maintained per view. + +Cache DB RRsets + Statistics counters related to cache contents, maintained per view. + + The "NXDOMAIN" counter is the number of names that have been cached as + nonexistent. Counters named for RR types indicate the number of active + RRsets for each type in the cache database. + + If an RR type name is preceded by an exclamation point (!), it represents the + number of records in the cache which indicate that the type does not exist + for a particular name; this is also known as "NXRRSET". If an RR type name + is preceded by a hash mark (#), it represents the number of RRsets for this + type that are present in the cache but whose TTLs have expired; these RRsets + may only be used if stale answers are enabled. If an RR type name is + preceded by a tilde (~), it represents the number of RRsets for this type + that are present in the cache database but are marked for garbage collection; + these RRsets cannot be used. + +Socket I/O Statistics + Statistics counters for network-related events. + +A subset of Name Server Statistics is collected and shown per zone for +which the server has the authority, when :any:`zone-statistics` is set to +``full`` (or ``yes``), for backward compatibility. See the description of +:any:`zone-statistics` in :namedconf:ref:`options` for further details. + +These statistics counters are shown with their zone and view names. The +view name is omitted when the server is not configured with explicit +views. + +There are currently two user interfaces to get access to the statistics. +One is in plain-text format, dumped to the file specified by the +:any:`statistics-file` configuration option; the other is remotely +accessible via a statistics channel when the :any:`statistics-channels` +statement is specified in the configuration file. + +.. _statsfile: + +The Statistics File +~~~~~~~~~~~~~~~~~~~ + +The text format statistics dump begins with a line, like: + +``+++ Statistics Dump +++ (973798949)`` + +The number in parentheses is a standard Unix-style timestamp, measured +in seconds since January 1, 1970. Following that line is a set of +statistics information, which is categorized as described above. Each +section begins with a line, like: + +``++ Name Server Statistics ++`` + +Each section consists of lines, each containing the statistics counter +value followed by its textual description; see below for available +counters. For brevity, counters that have a value of 0 are not shown in +the statistics file. + +The statistics dump ends with the line where the number is identical to +the number in the beginning line; for example: + +``--- Statistics Dump --- (973798949)`` + +.. _statistics_counters: + +Statistics Counters +~~~~~~~~~~~~~~~~~~~ + +The following lists summarize the statistics counters that BIND 9 provides. +For each counter, the abbreviated +symbol name is given; these symbols are shown in the statistics +information accessed via an HTTP statistics channel. +The description of the counter is also shown in the +statistics file but, in this document, may be slightly +modified for better readability. + +.. _stats_counters: + +Name Server Statistics Counters +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +``Requestv4`` + This indicates the number of IPv4 requests received. Note: this also counts non-query requests. + +``Requestv6`` + This indicates the number of IPv6 requests received. Note: this also counts non-query requests. + +``ReqEdns0`` + This indicates the number of requests received with EDNS(0). + +``ReqBadEDN SVer`` + This indicates the number of requests received with an unsupported EDNS version. + +``ReqTSIG`` + This indicates the number of requests received with TSIG. + +``ReqSIG0`` + This indicates the number of requests received with SIG(0). + +``ReqBadSIG`` + This indicates the number of requests received with an invalid (TSIG or SIG(0)) signature. + +``ReqTCP`` + This indicates the number of TCP requests received. + +``AuthQryRej`` + This indicates the number of rejected authoritative (non-recursive) queries. + +``RecQryRej`` + This indicates the number of rejected recursive queries. + +``XfrRej`` + This indicates the number of rejected zone transfer requests. + +``UpdateRej`` + This indicates the number of rejected dynamic update requests. + +``Response`` + This indicates the number of responses sent. + +``RespTruncated`` + This indicates the number of truncated responses sent. + +``RespEDNS0`` + This indicates the number of responses sent with EDNS(0). + +``RespTSIG`` + This indicates the number of responses sent with TSIG. + +``RespSIG0`` + This indicates the number of responses sent with SIG(0). + +``QrySuccess`` + This indicates the number of queries that resulted in a successful answer, meaning queries which return a NOERROR response with at least one answer RR. This corresponds to the ``success`` counter of previous versions of BIND 9. + +``QryAuthAns`` + This indicates the number of queries that resulted in an authoritative answer. + +``QryNoauthAns`` + This indicates the number of queries that resulted in a non-authoritative answer. + +``QryReferral`` + This indicates the number of queries that resulted in a referral answer. This corresponds to the ``referral`` counter of previous versions of BIND 9. + +``QryNxrrset`` + This indicates the number of queries that resulted in NOERROR responses with no data. This corresponds to the ``nxrrset`` counter of previous versions of BIND 9. + +``QrySERVFAIL`` + This indicates the number of queries that resulted in SERVFAIL. + +``QryFORMERR`` + This indicates the number of queries that resulted in FORMERR. + +``QryNXDOMAIN`` + This indicates the number of queries that resulted in NXDOMAIN. This corresponds to the ``nxdomain`` counter of previous versions of BIND 9. + +``QryRecursion`` + This indicates the number of queries that caused the server to perform recursion in order to find the final answer. This corresponds to the :any:`recursion` counter of previous versions of BIND 9. + +``QryDuplicate`` + This indicates the number of queries which the server attempted to recurse but for which it discovered an existing query with the same IP address, port, query ID, name, type, and class already being processed. This corresponds to the ``duplicate`` counter of previous versions of BIND 9. + +``QryDropped`` + This indicates the number of recursive queries dropped by the server as a result of configured limits. These limits include the settings of the :any:`fetches-per-zone`, :any:`fetches-per-server`, :any:`clients-per-query`, and :any:`max-clients-per-query` options, as well as the :any:`rate-limit` option. This corresponds to the ``dropped`` counter of previous versions of BIND 9. + +``QryFailure`` + This indicates the number of query failures. This corresponds to the ``failure`` counter of previous versions of BIND 9. Note: this counter is provided mainly for backward compatibility with previous versions; normally, more fine-grained counters such as ``AuthQryRej`` and ``RecQryRej`` that would also fall into this counter are provided, so this counter is not of much interest in practice. + +``QryNXRedir`` + This indicates the number of queries that resulted in NXDOMAIN that were redirected. + +``QryNXRedirRLookup`` + This indicates the number of queries that resulted in NXDOMAIN that were redirected and resulted in a successful remote lookup. + +``XfrReqDone`` + This indicates the number of requested and completed zone transfers. + +``UpdateReqFwd`` + This indicates the number of forwarded update requests. + +``UpdateRespFwd`` + This indicates the number of forwarded update responses. + +``UpdateFwdFail`` + This indicates the number of forwarded dynamic updates that failed. + +``UpdateDone`` + This indicates the number of completed dynamic updates. + +``UpdateFail`` + This indicates the number of failed dynamic updates. + +``UpdateBadPrereq`` + This indicates the number of dynamic updates rejected due to a prerequisite failure. + +``UpdateQuota`` + This indicates the number of times a dynamic update or update + forwarding request was rejected because the number of pending + requests exceeded :any:`update-quota`. + +``RateDropped`` + This indicates the number of responses dropped due to rate limits. + +``RateSlipped`` + This indicates the number of responses truncated by rate limits. + +``RPZRewrites`` + This indicates the number of response policy zone rewrites. + +.. _zone_stats: + +Zone Maintenance Statistics Counters +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +``NotifyOutv4`` + This indicates the number of IPv4 notifies sent. + +``NotifyOutv6`` + This indicates the number of IPv6 notifies sent. + +``NotifyInv4`` + This indicates the number of IPv4 notifies received. + +``NotifyInv6`` + This indicates the number of IPv6 notifies received. + +``NotifyRej`` + This indicates the number of incoming notifies rejected. + +``SOAOutv4`` + This indicates the number of IPv4 SOA queries sent. + +``SOAOutv6`` + This indicates the number of IPv6 SOA queries sent. + +``AXFRReqv4`` + This indicates the number of requested IPv4 AXFRs. + +``AXFRReqv6`` + This indicates the number of requested IPv6 AXFRs. + +``IXFRReqv4`` + This indicates the number of requested IPv4 IXFRs. + +``IXFRReqv6`` + This indicates the number of requested IPv6 IXFRs. + +``XfrSuccess`` + This indicates the number of successful zone transfer requests. + +``XfrFail`` + This indicates the number of failed zone transfer requests. + +.. _resolver_stats: + +Resolver Statistics Counters +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +``Queryv4`` + This indicates the number of IPv4 queries sent. + +``Queryv6`` + This indicates the number of IPv6 queries sent. + +``Responsev4`` + This indicates the number of IPv4 responses received. + +``Responsev6`` + This indicates the number of IPv6 responses received. + +``NXDOMAIN`` + This indicates the number of NXDOMAINs received. + +``SERVFAIL`` + This indicates the number of SERVFAILs received. + +``FORMERR`` + This indicates the number of FORMERRs received. + +``OtherError`` + This indicates the number of other errors received. + +``EDNS0Fail`` + This indicates the number of EDNS(0) query failures. + +``Mismatch`` + This indicates the number of mismatched responses received, meaning the DNS ID, response's source address, and/or the response's source port does not match what was expected. (The port must be 53 or as defined by the :namedconf:ref:`port` option.) This may be an indication of a cache poisoning attempt. + +``Truncated`` + This indicates the number of truncated responses received. + +``Lame`` + This indicates the number of lame delegations received. + +``Retry`` + This indicates the number of query retries performed. + +``QueryAbort`` + This indicates the number of queries aborted due to quota control. + +``QuerySockFail`` + This indicates the number of failures in opening query sockets. One common reason for such failures is due to a limitation on file descriptors. + +``QueryCurUDP`` + This indicates the number of UDP queries in progress. + +``QueryCurTCP`` + This indicates the number of TCP queries in progress. + +``QueryTimeout`` + This indicates the number of query timeouts. + +``GlueFetchv4`` + This indicates the number of IPv4 NS address fetches invoked. + +``GlueFetchv6`` + This indicates the number of IPv6 NS address fetches invoked. + +``GlueFetchv4Fail`` + This indicates the number of failed IPv4 NS address fetches. + +``GlueFetchv6Fail`` + This indicates the number of failed IPv6 NS address fetches. + +``ValAttempt`` + This indicates the number of attempted DNSSEC validations. + +``ValOk`` + This indicates the number of successful DNSSEC validations. + +``ValNegOk`` + This indicates the number of successful DNSSEC validations on negative information. + +``ValFail`` + This indicates the number of failed DNSSEC validations. + +``QryRTTnn`` + This provides a frequency table on query round-trip times (RTTs). Each ``nn`` specifies the corresponding frequency. In the sequence of ``nn_1``, ``nn_2``, ..., ``nn_m``, the value of ``nn_i`` is the number of queries whose RTTs are between ``nn_(i-1)`` (inclusive) and ``nn_i`` (exclusive) milliseconds. For the sake of convenience, we define ``nn_0`` to be 0. The last entry should be represented as ``nn_m+``, which means the number of queries whose RTTs are equal to or greater than ``nn_m`` milliseconds. + +``NumFetch`` + This indicates the number of active fetches. + +``BucketSize`` + This indicates the number the resolver's internal buckets (a static number). + +``REFUSED`` + This indicates the number of REFUSED responses received. + +``ClientCookieOut`` + This indicates the number of COOKIE sent with client cookie only. + +``ServerCookieOut`` + This indicates the number of COOKIE sent with client and server cookie. + +``CookieIn`` + This indicates the number of COOKIE replies received. + +``CookieClientOk`` + This indicates the number of COOKIE client ok. + +``BadEDNSVersion`` + This indicates the number of bad EDNS version replies received. + +``BadCookieRcode`` + This indicates the number of bad cookie rcode replies received. + +``ZoneQuota`` + This indicates the number of queries spilled due to zone quota. + +``ServerQuota`` + This indicates the number of queries spilled due to server quota. + +``ClientQuota`` + This indicates the number of queries spilled due to clients per query quota. + +``NextItem`` + This indicates the number of waits for next item, when an invalid response is received. + +``Priming`` + This indicates the number of priming fetches performed by the resolver. + +.. _socket_stats: + +Socket I/O Statistics Counters +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Socket I/O statistics counters are defined per socket type, which are +``UDP4`` (UDP/IPv4), ``UDP6`` (UDP/IPv6), ``TCP4`` (TCP/IPv4), ``TCP6`` +(TCP/IPv6), ``Unix`` (Unix Domain), and ``FDwatch`` (sockets opened +outside the socket module). In the following list, ``<TYPE>`` represents +a socket type. Not all counters are available for all socket types; +exceptions are noted in the descriptions. + +``<TYPE>Open`` + This indicates the number of sockets opened successfully. This counter does not apply to the ``FDwatch`` type. + +``<TYPE>OpenFail`` + This indicates the number of failures to open sockets. This counter does not apply to the ``FDwatch`` type. + +``<TYPE>Close`` + This indicates the number of closed sockets. + +``<TYPE>BindFail`` + This indicates the number of failures to bind sockets. + +``<TYPE>ConnFail`` + This indicates the number of failures to connect sockets. + +``<TYPE>Conn`` + This indicates the number of connections established successfully. + +``<TYPE>AcceptFail`` + This indicates the number of failures to accept incoming connection requests. This counter does not apply to the ``UDP`` and ``FDwatch`` types. + +``<TYPE>Accept`` + This indicates the number of incoming connections successfully accepted. This counter does not apply to the ``UDP`` and ``FDwatch`` types. + +``<TYPE>SendErr`` + This indicates the number of errors in socket send operations. + +``<TYPE>RecvErr`` + This indicates the number of errors in socket receive operations, including errors of send operations on a connected UDP socket, notified by an ICMP error message. diff --git a/doc/arm/requirements.inc.rst b/doc/arm/requirements.inc.rst new file mode 100644 index 0000000..f15bd57 --- /dev/null +++ b/doc/arm/requirements.inc.rst @@ -0,0 +1,72 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _requirements: + +Resource Requirements +===================== + +.. _hw_req: + +Hardware Requirements +--------------------- + +DNS hardware requirements have traditionally been quite modest. For many +installations, servers that have been retired from active duty +have performed admirably as DNS servers. + +However, the DNSSEC features of BIND 9 may be quite CPU-intensive, +so organizations that make heavy use of these features may wish +to consider larger systems for these applications. BIND 9 is fully +multithreaded, allowing full utilization of multiprocessor systems for +installations that need it. + +.. _cpu_req: + +CPU Requirements +---------------- + +CPU requirements for BIND 9 range from i386-class machines, for serving +static zones without caching, to enterprise-class machines +to process many dynamic updates and DNSSEC-signed zones, serving +many thousands of queries per second. + +.. _mem_req: + +Memory Requirements +------------------- + +Server memory must be sufficient to hold both the cache and the +zones loaded from disk. The :any:`max-cache-size` option can +limit the amount of memory used by the cache, at the expense of reducing +cache hit rates and causing more DNS traffic. It is still good practice +to have enough memory to load all zone and cache data into memory; +unfortunately, the best way to determine this for a given installation +is to watch the name server in operation. After a few weeks, the server +process should reach a relatively stable size where entries are expiring +from the cache as fast as they are being inserted. + +.. _intensive_env: + +Name Server-Intensive Environment Issues +---------------------------------------- + +For name server-intensive environments, there are two +configurations that may be used. The first is one where clients and any +second-level internal name servers query the main name server, which has +enough memory to build a large cache; this approach minimizes the +bandwidth used by external name lookups. The second alternative is to +set up second-level internal name servers to make queries independently. +In this configuration, none of the individual machines need to have as +much memory or CPU power as in the first alternative, but this has the +disadvantage of making many more external queries, as none of the name +servers share their cached data. + diff --git a/doc/arm/requirements.txt b/doc/arm/requirements.txt new file mode 100644 index 0000000..4dd6796 --- /dev/null +++ b/doc/arm/requirements.txt @@ -0,0 +1,5 @@ +# Make Read the Docs use the exact same package versions as in +# registry.gitlab.isc.org/isc-projects/images/bind9:debian-bookworm-amd64 +Sphinx==6.2.1 +docutils==0.18.1 +sphinx_rtd_theme==1.2.2 diff --git a/doc/arm/resolver-forward.dia b/doc/arm/resolver-forward.dia Binary files differnew file mode 100644 index 0000000..9faf84e --- /dev/null +++ b/doc/arm/resolver-forward.dia diff --git a/doc/arm/resolver-forward.png b/doc/arm/resolver-forward.png Binary files differnew file mode 100644 index 0000000..188e834 --- /dev/null +++ b/doc/arm/resolver-forward.png diff --git a/doc/arm/rpz.inc.rst b/doc/arm/rpz.inc.rst new file mode 100644 index 0000000..1834954 --- /dev/null +++ b/doc/arm/rpz.inc.rst @@ -0,0 +1,786 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. highlight:: none + +.. dns_firewalls_rpz: + +DNS Firewalls and Response Policy Zones +--------------------------------------- + +A DNS firewall examines DNS traffic and allows some responses to pass +through while blocking others. This examination can be based on several +criteria, including the name requested, the data (such as an IP address) +associated with that name, or the name or IP address of the name server +that is authoritative for the requested name. Based on these criteria, a +DNS firewall can be configured to discard, modify, or replace the original +response, allowing administrators more control over what systems can access +or be accessed from their networks. + +DNS Response Policy Zones (RPZ) are a form of DNS firewall in which the +firewall rules are expressed within the DNS itself - encoded in an open, +vendor-neutral format as records in specially constructed DNS zones. + +Using DNS zones to configure policy allows policy to be shared from +one server to another using the standard DNS zone transfer mechanism. +This allows a DNS operator to maintain their own firewall policies and +share them easily amongst their internal name servers, or to subscribe to +external firewall policies such as commercial or cooperative "threat +feeds," or both. + +:iscman:`named` can subscribe to up to 64 Response Policy Zones, each of which +encodes a separate policy rule set. Each rule is stored in a DNS resource +record set (RRset) within the RPZ, and consists of a **trigger** and an +**action**. There are five types of triggers and six types of actions. + +A response policy rule in a DNS RPZ can be triggered as follows: + +- by the IP address of the client +- by the query name +- by an address which would be present in a truthful response +- by the name or address of an authoritative name server responsible for + publishing the original response + +A response policy action can be one of the following: + +- to synthesize a "domain does not exist" (NXDOMAIN) response +- to synthesize a "name exists but there are no records of the requested + type" (NODATA) response +- to drop the response +- to switch to TCP by sending a truncated UDP response that requires the + DNS client to try again with TCP +- to replace/override the response's data with specific data (provided + within the response policy zone) +- to exempt the response from further policy processing + +The most common use of a DNS firewall is to "poison" a domain name, IP +address, name server name, or name server IP address. Poisoning is usually +done by forcing a synthetic "domain does not exist" (NXDOMAIN) response. +This means that if an administrator maintains a list of known "phishing" +domains, these names can be made unreachable by customers or end users just +by adding a firewall policy into the recursive DNS server, with a trigger +for each known "phishing" domain, and an action in every case forcing a +synthetic NXDOMAIN response. It is also possible to use a data-replacement +action such as answering for these known "phishing" domains with the name +of a local web server that can display a warning page. Such a web server +would be called a "walled garden." + +.. note:: + + Authoritative name servers can be responsible for many different domains. + If DNS RPZ is used to poison all domains served by some authoritative + name server name or address, the effects can be quite far-reaching. Users + are advised to ensure that such authoritative name servers do not also + serve domains that should not be poisoned. + +.. _why_dns_firewall: + +Why Use a DNS Firewall? +~~~~~~~~~~~~~~~~~~~~~~~ + +Criminal and network abuse traffic on the Internet often uses the Domain +Name System (DNS), so protection against these threats should include DNS +firewalling. A DNS firewall can selectively intercept DNS queries for +known network assets including domain names, IP addresses, and name +servers. Interception can mean rewriting a DNS response to direct a web +browser to a "walled garden," or simply making any malicious network assets +invisible and unreachable. + +.. _what_dns_firewalls_do: + +What Can a DNS Firewall Do? +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Firewalls work by applying a set of rules to a traffic flow, where each +rule consists of a trigger and an action. Triggers determine which messages +within the traffic flow are handled specially, and actions determine what +that special handling is. For a DNS firewall, the traffic flow to be +controlled consists of responses sent by a recursive DNS server to its +end-user clients. Some true responses are not safe for all clients, so the +policy rules in a DNS firewall allow some responses to be intercepted and +replaced with safer content. + +.. _rpz_rule_sets: + +Creating and Maintaining RPZ Rule Sets +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In DNS RPZ, the DNS firewall policy rule set is stored in a DNS zone, which +is maintained and synchronized using the same tools and methods as for any +other DNS zone. The primary name server for a DNS RPZ may be an internal +server, if an administrator is creating and maintaining their own DNS +policy zone, or it may be an external name server (such as a security +vendor's server), if importing a policy zone published externally. The +primary copy of the DNS firewall policy can be a DNS "zone file" which is +either edited by hand or generated from a database. A DNS zone can also be +edited indirectly using DNS dynamic updates (for example, using the +"nsupdate" shell level utility). + +DNS RPZ allows firewall rules to be expressed in a DNS zone format and then +carried to subscribers as DNS data. A recursive DNS server which is capable +of processing DNS RPZ synchronizes these DNS firewall rules using the same +standard DNS tools and protocols used for secondary name service. The DNS +policy information is then promoted to the DNS control plane inside the +customer's DNS resolver, making that server into a DNS firewall. + +A security company whose products include threat intelligence feeds can use +a DNS Response Policy Zone (RPZ) as a delivery channel to customers. +Threats can be expressed as known-malicious IP addresses and subnets, +known-malicious domain names, and known-malicious domain name servers. By +feeding this threat information directly into customers' local DNS +resolvers, providers can transform these DNS servers into a distributed DNS +firewall. + +When a customer's DNS resolver is connected by a realtime subscription to a +threat intelligence feed, the provider can protect the customer's end users +from malicious network elements (including IP addresses and subnets, domain +names, and name servers) immediately as they are discovered. While it may +take days or weeks to "take down" criminal and abusive infrastructure once +reported, a distributed DNS firewall can respond instantly. + +Other distributed TCP/IP firewalls have been on the market for many years, +and enterprise users are now comfortable importing real-time threat +intelligence from their security vendors directly into their firewalls. +This intelligence can take the form of known-malicious IP addresses or +subnets, or of patterns which identify known-malicious email attachments, +file downloads, or web addresses (URLs). In some products it is also +possible to block DNS packets based on the names or addresses they carry. + +.. _rpz_limitations: + +Limitations of DNS RPZ +~~~~~~~~~~~~~~~~~~~~~~ + +We're often asked if DNS RPZ could be used to set up redirection to a CDN. +For example, if "mydomain.com" is a normal domain with SOA, NS, MX, TXT +records etc., then if someone sends an A or AAAA query for "mydomain.com", +can we use DNS RPZ on an authoritative nameserver to return "CNAME +mydomain.com.my-cdn-provider.net"? + +The problem with this suggestion is that there is no way to CNAME only A +and AAAA queries, not even with RPZ. + +The underlying reason is that if the authoritative server answers with a +CNAME, the recursive server making that query will cache the response. +Thereafter (while the CNAME is still in cache), it assumes that there are +no records of any non-CNAME type for the name that was being queried, and +directs subsequent queries for all other types directly to the target name +of the CNAME record. + +To be clear, this is not a limitation of RPZ; it is a function of the way +the DNS protocol works. It's simply not possible to use "partial" CNAMES to +help when setting up CDNs because doing this will break other functionality +such as email routing. + +Similarly, following the DNS protocol definition, wildcards in the form of +``*.example`` records might behave in unintuitive ways. For a detailed +definition of wildcards in DNS, please see :rfc:`4592`, especially section 2. + +.. _dns_firewall_examples: + +DNS Firewall Usage Examples +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Here are some scenarios in which a DNS firewall might be useful. + +Some known threats are based on an IP address or subnet (IP address range). +For example, an analysis may show that all addresses in a "class C" network +are used by a criminal gang for "phishing" web servers. With a DNS firewall +based on DNS RPZ, a firewall policy can be created such as "if a DNS lookup +would result in an address from this class C network, then answer instead +with an NXDOMAIN indication." That simple rule would prevent any end users +inside customers' networks from being able to look up any domain name used +in this phishing attack – without having to know in advance what those +names might be. + +Other known threats are based on domain names. An analysis may determine +that a certain domain name or set of domain names is being or will shortly +be used for spamming, phishing, or other Internet-based attacks which all +require working domain names. By adding name-triggered rules to a +distributed DNS firewall, providers can protect customers' end users from +any attacks which require them to be able to look up any of these malicious +names. The names can be wildcards (for example, \*.evil.com), and these +wildcards can have exceptions if some domains are not as malicious as +others (if \*.evil.com is bad, then not.evil.com might be an exception). + +Alongside growth in electronic crime has come growth of electronic criminal +expertise. Many criminal gangs now maintain their own extensive DNS +infrastructure to support a large number of domain names and a diverse set +of IP addressing resources. Analyses show in many cases that the only truly +fixed assets criminal organizations have are their name servers, which are +by nature slightly less mobile than other network assets. In such cases, +DNS administrators can anchor their DNS firewall policies in the abusive +name server names or name server addresses, and thus protect their +customers' end users from threats where neither the domain name nor the IP +address of that threat is known in advance. + +Electronic criminals rely on the full resiliency of DNS just as the rest of +digital society does. By targeting criminal assets at the DNS level we can +deny these criminals the resilience they need. A distributed DNS firewall +can leverage the high skills of a security company to protect a large +number of end users. DNS RPZ, as the first open and vendor-neutral +distributed DNS firewall, can be an effective way to deliver threat +intelligence to customers. + +A Real-World Example of DNS RPZ's Value +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +The Conficker malware worm (https://en.wikipedia.org/wiki/Conficker) was +first detected in 2008. Although it is no longer an active threat, the +techniques described here can be applied to other DNS threats. + +Conficker used a domain generation algorithm (DGA) to choose up to 50,000 +command and control domains per day. It would be impractical to create +an RPZ that contains so many domain names and changes so much on a daily +basis. Instead, we can trigger RPZ rules based on the names of the name +servers that are authoritative for the command and control domains, rather +than trying to trigger on each of 50,000 different (daily) query names. +Since the well-known name server names for Conficker's domain names are +never used by nonmalicious domains, it is safe to poison all lookups that +rely on these name servers. Here is an example that achieves this result: + +:: + + $ORIGIN rpz.example.com. + ns.0xc0f1c3a5.com.rpz-nsdname CNAME *.walled-garden.example.com. + ns.0xc0f1c3a5.net.rpz-nsdname CNAME *.walled-garden.example.com. + ns.0xc0f1c3a5.org.rpz-nsdname CNAME *.walled-garden.example.com. + +The ``*`` at the beginning of these CNAME target names is special, and it +causes the original query name to be prepended to the CNAME target. So if a +user tries to visit the Conficker command and control domain +http://racaldftn.com.ai/ (which was a valid Conficker command and control +domain name on 19-October-2011), the RPZ-configured recursive name server +will send back this answer: + +:: + + racaldftn.com.ai. CNAME racaldftn.com.ai.walled-garden.example.com. + racaldftn.com.ai.walled-garden.example.com. A 192.168.50.3 + +This example presumes that the following DNS content has also been created, +which is not part of the RPZ zone itself but is in another domain: + +:: + + $ORIGIN walled-garden.example.com. + * A 192.168.50.3 + +Assuming that we're running a web server listening on 192.168.50.3 that +always displays a warning message no matter what uniform resource +identifier (URI) is used, the above RPZ configuration will instruct the web +browser of any infected end user to connect to a "server name" consisting +of their original lookup name (racaldftn.com.ai) prepended to the walled +garden domain name (walled-garden.example.com). This is the name that will +appear in the web server's log file, and having the full name in that log +file will facilitate an analysis as to which users are infected with what +virus. + +.. _firewall_updates: + +Keeping Firewall Policies Updated +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +It is vital for overall system performance that incremental zone transfers +(see :rfc:`1995`) and real-time change notification (see :rfc:`1996`) be +used to synchronize DNS firewall rule sets between the publisher's primary +copy of the rule set and the subscribers' working copies of the rule set. + +If DNS dynamic updates are used to maintain a DNS RPZ rule set, the name +server automatically calculates a stream of deltas for use when sending +incremental zone transfers to the subscribing name servers. Sending a +stream of deltas – known as an "incremental zone transfer" or IXFR – is +usually much faster than sending the full zone every time it changes, so +it's worth the effort to use an editing method that makes such incremental +transfers possible. + +Administrators who edit or periodically regenerate a DNS RPZ rule set and +whose primary name server uses BIND can enable the +:any:`ixfr-from-differences` option, which tells the primary name server to +calculate the differences between each new zone and the preceding version, +and to make these differences available as a stream of deltas for use in +incremental zone transfers to the subscribing name servers. This will look +something like the following: + +.. code-block:: c + + options { + // ... + ixfr-from-differences yes; + // ... + }; + +As mentioned above, the simplest and most common use of a DNS firewall is +to poison domain names known to be purely malicious, by simply making them +disappear. All DNS RPZ rules are expressed as resource record sets +(RRsets), and the way to express a "force a name-does-not-exist condition" +is by adding a CNAME pointing to the root domain (``.``). In practice this +looks like: + +:: + + $ORIGIN rpz.example.com. + malicious1.org CNAME . + *.malicious1.org CNAME . + malicious2.org CNAME . + *.malicious2.org CNAME . + +Two things are noteworthy in this example. First, the malicious names are +made relative within the response policy zone. Since there is no trailing +dot following ".org" in the above example, the actual RRsets created within +this response policy zone are, after expansion: + +:: + + malicious1.org.rpz.example.com. CNAME . + *.malicious1.org.rpz.example.com. CNAME . + malicious2.org.rpz.example.com. CNAME . + *.malicious2.org.rpz.example.com. CNAME . + +Second, for each name being poisoned, a wildcard name is also listed. +This is because a malicious domain name probably has or may potentially +have malicious subdomains. + +In the above example, the relative domain names `malicious1.org` and +`malicious2.org` will match only the real domain names `malicious1.org` +and `malicious2.org`, respectively. The relative domain names +`*.malicious1.org` and `*.malicious2.org` will match any +`subdomain.of.malicious1.org` or `subdomain.of.malicious2.org`, +respectively. + +This example forces an NXDOMAIN condition as its policy action, but other +policy actions are also possible. + +.. _multiple_rpz_performance: + +Performance and Scalability When Using Multiple RPZs +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Since version 9.10, BIND can be configured to have different response +policies depending on the identity of the querying client and the nature of +the query. To configure BIND response policy, the information is placed +into a zone file whose only purpose is conveying the policy information to +BIND. A zone file containing response policy information is called a +Response Policy Zone, or RPZ, and the mechanism in BIND that uses the +information in those zones is called DNS RPZ. + +It is possible to use as many as 64 separate RPZ files in a single instance +of BIND, and BIND is not significantly slowed by such heavy use of RPZ. + +(Note: by default, BIND 9.11 only supports up to 32 RPZ files, but this +can be increased to 64 at compile time. All other supported versions of +BIND support 64 by default.) + +Each one of the policy zone files can specify policy for as many +different domains as necessary. The limit of 64 is on the number of +independently-specified policy collections and not the number of zones +for which they specify policy. + +Policy information from all of the policy zones together are stored in a +special data structure allowing simultaneous lookups across all policy +zones to be performed very rapidly. Looking up a policy rule is +proportional to the logarithm of the number of rules in the largest +single policy zone. + +.. _rpz_practical_tips: + +Practical Tips for DNS Firewalls and DNS RPZ +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Administrators who subscribe to an externally published DNS policy zone and +who have a large number of internal recursive name servers should create an +internal name server called a "distribution master" (DM). The DM is a +secondary (stealth secondary) name server from the publisher's point of +view; that is, the DM is fetching zone content from the external server. +The DM is also a primary name server from the internal recursive name +servers' point of view: they fetch zone content from the DM. In this +configuration the DM is acting as a gateway between the external publisher +and the internal subscribers. + +The primary server must know the unicast listener address of every +subscribing recursive server, and must enumerate all of these addresses as +destinations for real time zone change notification (as described in +:rfc:`1996`). So if an enterprise-wide RPZ is called "rpz.example.com" and +if the unicast listener addresses of four of the subscribing recursive name +servers are 192.0.200.1, 192.0.201.1, 192.0.202.1, and 192.0.203.1, the +primary server's configuration looks like this: + +.. code-block:: c + + zone "rpz.example.com" { + type primary; + file "primary/rpz.example.com"; + notify explicit; + also-notify { 192.0.200.1; + 192.0.201.1; + 192.0.202.1; + 192.0.203.1; }; + allow-transfer { 192.0.200.1; + 192.0.201.1; + 192.0.202.1; + 192.0.203.1; }; + allow-query { localhost; }; + }; + +Each recursive DNS server that subscribes to the policy zone must be +configured as a secondary server for the zone, and must also be configured +to use the policy zone for local response policy. To subscribe a recursive +name server to a response policy zone where the unicast listener address +of the primary server is 192.0.220.2, the server's configuration should +look like this: + +.. code-block:: c + + options { + // ... + response-policy { + zone "rpz.example.com"; + }; + // ... + }; + + zone "rpz.example.com"; + type secondary; + primaries { 192.0.222.2; }; + file "secondary/rpz.example.com"; + allow-query { localhost; }; + allow-transfer { none; }; + }; + +Note that queries are restricted to "localhost," since query access is +never used by DNS RPZ itself, but may be useful to DNS operators for use in +debugging. Transfers should be disallowed to prevent policy information +leaks. + +If an organization's business continuity depends on full connectivity with +another company whose ISP also serves some criminal or abusive customers, +it's possible that one or more external RPZ providers – that is, security +feed vendors – may eventually add some RPZ rules that could hurt a +company's connectivity to its business partner. Users can protect +themselves from this risk by using an internal RPZ in addition to any +external RPZs, and by putting into their internal RPZ some "pass-through" +rules to prevent any policy action from affecting a DNS response that +involves a business partner. + +A recursive DNS server can be connected to more than one RPZ, and these are +searched in order. Therefore, to protect a network from dangerous policies +which may someday appear in external RPZ zones, administrators should list +the internal RPZ zones first. + + +.. code-block:: c + + options { + // ... + response-policy { + zone "rpz.example.com"; + zone "rpz.security-vendor-1.com"; + zone "rpz.security-vendor-2.com"; + }; + // ... + }; + +Within an internal RPZ, there need to be rules describing the network +assets of business partners whose communications need to be protected. +Although it is not generally possible to know what domain names they use, +administrators will be aware of what address space they have and perhaps +what name server names they use. + +:: + + $ORIGIN rpz.example.com. + 8.0.0.0.10.rpz-ip CNAME rpz-passthru. + 16.0.0.45.128.rpz-nsip CNAME rpz-passthru. + ns.partner1.com.rpz-nsdname CNAME rpz-passthru. + ns.partner2.com.rpz-nsdname CNAME rpz-passthru. + +Here, we know that answers in address block 10.0.0.0/8 indicate a business +partner, as well as answers involving any name server whose address is in +the 128.45.0.0/16 address block, and answers involving the name servers +whose names are ns.partner1.com or ns.partner2.com. + +The above example demonstrates that when matching by answer IP address (the +.rpz-ip owner), or by name server IP address (the .rpz-nsip owner) or by +name server domain name (the .rpz-nsdname owner), the special RPZ marker +(.rpz-ip, .rpz-nsip, or .rpz-nsdname) does not appear as part of the CNAME +target name. + +By triggering these rules using the known network assets of a partner, +and using the "pass-through" policy action, no later RPZ processing +(which in the above example refers to the "rpz.security-vendor-1.com" and +"rpz.security-vendor-2.com" policy zones) will have any effect on DNS +responses for partner assets. + +.. _walled_garden_ip_address: + +Creating a Simple Walled Garden Triggered by IP Address +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +It may be the case that the only thing known about an attacker is the IP +address block they are using for their "phishing" web servers. If the +domain names and name servers they use are unknown, but it is known that +every one of their "phishing" web servers is within a small block of IP +addresses, a response can be triggered on all answers that would include +records in this address range, using RPZ rules that look like the following +example: + +:: + + $ORIGIN rpz.example.com. + 22.0.212.94.109.rpz-ip CNAME drop.garden.example.com. + *.212.94.109.in-addr.arpa CNAME . + *.213.94.109.in-addr.arpa CNAME . + *.214.94.109.in-addr.arpa CNAME . + *.215.94.109.in-addr.arpa CNAME . + +Here, if a truthful answer would include an A (address) RR (resource +record) whose value were within the 109.94.212.0/22 address block, then a +synthetic answer is sent instead of the truthful answer. Assuming the query +is for www.malicious.net, the synthetic answer is: + +:: + + www.malicious.net. CNAME drop.garden.example.com. + drop.garden.example.com. A 192.168.7.89 + +This assumes that `drop.garden.example.com` has been created as real DNS +content, outside of the RPZ: + +:: + + $ORIGIN example.com. + drop.garden A 192.168.7.89 + +In this example, there is no "\*" in the CNAME target name, so the original +query name will not be present in the walled garden web server's log file. +This is an undesirable loss of information, and is shown here for example +purposes only. + +The above example RPZ rules would also affect address-to-name (also +known as "reverse DNS") lookups for the unwanted addresses. If a mail +or web server receives a connection from an address in the example's +109.94.212.0/22 address block, it will perform a PTR record lookup to +find the domain name associated with that IP address. + +This kind of address-to-name translation is usually used for diagnostic or +logging purposes, but it is also common for email servers to reject any +email from IP addresses which have no address-to-name translation. Most +mail from such IP addresses is spam, so the lack of a PTR record here has +some predictive value. By using the "force name-does-not-exist" policy +trigger on all lookups in the PTR name space associated with an address +block, DNS administrators can give their servers a hint that these IP +addresses are probably sending junk. + +.. _known_rpz_inconsistency: + +A Known Inconsistency in DNS RPZ's NSDNAME and NSIP Rules +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Response Policy Zones define several possible triggers for each rule, and +among these two are known to produce inconsistent results. This is not a +bug; rather, it relates to inconsistencies in the DNS delegation model. + +DNS Delegation +^^^^^^^^^^^^^^ + +In DNS authority data, an NS RRset that is not at the apex of a DNS zone +creates a sub-zone. That sub-zone’s data is separate from the current (or +"parent") zone, and it can have different authoritative name servers than +the current zone. In this way, the root zone leads to COM, NET, ORG, and so +on, each of which have their own name servers and their own way of managing +their authoritative data. Similarly, ORG has delegations to ISC.ORG and to +millions of other “dot-ORG” zones, each of which can have its own set of +authoritative name servers. In the parlance of the protocol, these NS +RRsets below the apex of a zone are called “delegation points.” An +NS RRset at a delegation point contains a list of authoritative servers +to which the parent zone is delegating authority for all names at or below +the delegation point. + +At the apex of every zone there is also an NS RRset. Ideally, this +so-called “apex NS RRset” should be identical to the “delegation point NS +RRset” in the parent zone, but this ideal is not always achieved. In the +real DNS, it’s almost always easier for a zone administrator to update one +of these NS RRsets than the other, so that one will be correct and the +other out of date. This inconsistency is so common that it’s been +necessarily rendered harmless: domains that are inconsistent in this way +are less reliable and perhaps slower, but they still function as long as +there is some overlap between each of the NS RRsets and the truth. (“Truth” +in this case refers to the actual set of name servers that are +authoritative for the zone.) + +A Quick Review of DNS Iteration +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +In DNS recursive name servers, an incoming query that cannot be answered +from the local cache is sent to the closest known delegation point for the +query name. For example, if a server is looking up XYZZY.ISC.ORG and it +the name servers for ISC.ORG, then it sends the query to those servers +directly; however, if it has never heard of ISC.ORG before, it must first +send the query to the name servers for ORG (or perhaps even to the root +zone that is the parent of ORG). + +When it asks one of the parent name servers, that server will not have an +answer, so it sends a “referral” consisting only of the “delegation point +NS RRset.” Once the server receives this referral, it “iterates” by sending +the same query again, but this time to name servers for a more specific +part of the query name. Eventually this iteration terminates, usually by +getting an answer or a “name error” (NXDOMAIN) from the query name’s +authoritative server, or by encountering some type of server failure. + +When an authoritative server for the query name sends an answer, it has the +option of including a copy of the zone’s apex NS RRset. If this occurs, the +recursive name server caches this NS RRset, replacing the delegation point +NS RRset that it had received during the iteration process. In the parlance +of the DNS, the delegation point NS RRset is “glue,” meaning +non-authoritative data, or more of a hint than a real truth. On the other +hand, the apex NS RRset is authoritative data, coming as it does from the +zone itself, and it is considered more credible than the “glue.” For this +reason, it’s a little bit more important that the apex NS RRset be correct +than that the delegation point NS RRset be correct, since the former will +quickly replace the latter, and will be used more often for a longer total +period of time. + +Importantly, the authoritative name server need not include its apex NS +RRset in any answers, and recursive name servers do not ordinarily query +directly for this RRset. Therefore it is possible for the apex NS RRset to +be completely wrong without any operational ill-effects, since the wrong +data need not be exposed. Of course, if a query comes in for this NS RRset, +most recursive name servers will forward the query to the zone’s authority +servers, since it’s bad form to return “glue” data when asked a specific +question. In these corner cases, bad apex NS RRset data can cause a zone to +become unreachable unpredictably, according to what other queries the +recursive name server has processed. + +There is another kind of “glue," for name servers whose names are below +delegation points. If ORG delegates ISC.ORG to NS-EXT.ISC.ORG, the ORG +server needs to know an address for NS-EXT.ISC.ORG and return this address +as part of the delegation response. However, the name-to-address binding +for this name server is only authoritative inside the ISC.ORG zone; +therefore, the A or AAAA RRset given out with the delegation is +non-authoritative “glue,” which is replaced by an authoritative RRset if +one is seen. As with apex NS RRsets, the real A or AAAA RRset is not +automatically queried for by the recursive name server, but is queried for +if an incoming query asks for this RRset. + +Enter RPZ +^^^^^^^^^ + +RPZ has two trigger types that are intended to allow policy zone authors to +target entire groups of domains based on those domains all being served by +the same DNS servers: NSDNAME and NSIP. The NSDNAME and NSIP rules are +matched against the name and IP address (respectively) of the nameservers +of the zone the answer is in, and all of its parent zones. In its default +configuration, BIND actively fetches any missing NS RRsets and address +records. If, in the process of attempting to resolve the names of all of +these delegated server names, BIND receives a SERVFAIL response for any of +the queries, then it aborts the policy rule evaluation and returns SERVFAIL +for the query. This is technically neither a match nor a non-match of the +rule. + +Every "." in a fully qualified domain name (FQDN) represents a potential +delegation point. When BIND goes searching for parent zone NS RRsets (and, +in the case of NSIP, their accompanying address records), it has to check +every possible delegation point. This can become a problem for some +specialized pseudo-domains, such as some domain name and network reputation +systems, that have many "." characters in the names. It is further +complicated if that system also has non-compliant DNS servers that silently +drop queries for NS and SOA records. This forces BIND to wait for those +queries to time out before it can finish evaluating the policy rule, even +if this takes longer than a reasonable client typically waits for an answer +(delays of over 60 seconds have been observed). + +While both of these cases do involve configurations and/or servers that are +technically "broken," they may still "work" outside of RPZ NSIP and NSDNAME +rules because of redundancy and iteration optimizations. + +There are two RPZ options, ``nsip-wait-recurse`` and ``nsdname-wait-recurse``, +that alter BIND's behavior by allowing it to use only those records that +already exist in the cache when evaluating NSIP and NSDNAME rules, +respectively. + +Therefore NSDNAME and NSIP rules are unreliable. The rules may be matched +against either the apex NS RRset or the "glue" NS RRset, each with their +associated addresses (that also might or might not be "glue"). It’s in the +administrator's interests to discover both the delegation name server names +and addresses, and the apex name server names and authoritative address +records, to ensure correct use of NS and NSIP triggers in RPZ. Even then, +there may be collateral damage to completely unrelated domains that +otherwise "work," just by having NSIP and NSDNAME rules. + +.. _rpz_disable_mozilla_doh: + +Example: Using RPZ to Disable Mozilla DoH-by-Default +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Mozilla announced in September 2019 that they would enable DNS-over-HTTPS +(DoH) for all US-based users of the Firefox browser, sending all their DNS +queries to predefined DoH providers (Cloudflare's 1.1.1.1 service in +particular). This is a concern for some network administrators who do not +want their users' DNS queries to be rerouted unexpectedly. However, +Mozilla provides a mechanism to disable the DoH-by-default setting: +if the Mozilla-owned domain `use-application-dns.net +<https://use-application-dns.net>`_ returns an NXDOMAIN response code, Firefox +will not use DoH. + +To accomplish this using RPZ: + +1. Create a polizy zone file called ``mozilla.rpz.db`` configured so + that NXDOMAIN will be returned for any query to ``use-application-dns.net``: + +:: + + $TTL 604800 + $ORIGIN mozilla.rpz. + @ IN SOA localhost. root.localhost. 1 604800 86400 2419200 604800 + @ IN NS localhost. + use-application-dns.net CNAME . + +2. Add the zone into the BIND configuration (usually :iscman:`named.conf`): + +.. code-block:: c + + zone mozilla.rpz { + type primary; + file "/<PATH_TO>/mozilla.rpz.db"; + allow-query { localhost; }; + }; + +3. Enable use of the Response Policy Zone for all incoming queries + by adding the :any:`response-policy` directive into the ``options {}`` + section: + +.. code-block:: c + + options { + response-policy { zone mozilla.rpz; } break-dnssec yes; + }; + +4. Reload the configuration and test whether the Response Policy + Zone that was just added is in effect: + +.. code-block:: shell-session + + # rndc reload + # dig IN A use-application-dns.net @<IP_ADDRESS_OF_YOUR_RESOLVER> + # dig IN AAAA use-application-dns.net @<IP_ADDRESS_OF_YOUR_RESOLVER> + +The response should return NXDOMAIN instead of the list of IP addresses, +and the BIND 9 log should contain lines like this: + +.. code-block:: none + + 09-Sep-2019 18:50:49.439 client @0x7faf8e004a00 ::1#54175 (use-application-dns.net): rpz QNAME NXDOMAIN rewrite use-application-dns.net/AAAA/IN via use-application-dns.net.mozilla.rpz + 09-Sep-2019 18:50:49.439 client @0x7faf8e007800 127.0.0.1#62915 (use-application-dns.net): rpz QNAME NXDOMAIN rewrite use-application-dns.net/AAAA/IN via use-application-dns.net.mozilla.rpz + +Note that this is the simplest possible configuration; specific +configurations may be different, especially for administrators who are +already using other response policy zones, or whose servers are configured +with multiple views. diff --git a/doc/arm/security.inc.rst b/doc/arm/security.inc.rst new file mode 100644 index 0000000..2936432 --- /dev/null +++ b/doc/arm/security.inc.rst @@ -0,0 +1,234 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _security: + +Security Configurations +======================= + +.. _file_permissions: + +.. _access_Control_Lists: + +Access Control Lists +-------------------- + +Access Control Lists (ACLs) are address match lists that can be set up +and nicknamed for future use in :any:`allow-notify`, :any:`allow-query`, +:any:`allow-query-on`, :any:`allow-recursion`, :any:`blackhole`, +:any:`allow-transfer`, :any:`match-clients`, etc. + +ACLs give users finer control over who can access the +name server, without cluttering up configuration files with huge lists of +IP addresses. + +It is a *good idea* to use ACLs, and to control access. +Limiting access to the server by outside parties can help prevent +spoofing and denial of service (DoS) attacks against the server. + +ACLs match clients on the basis of up to three characteristics: 1) The +client's IP address; 2) the TSIG or SIG(0) key that was used to sign the +request, if any; and 3) an address prefix encoded in an EDNS +Client-Subnet option, if any. + +Here is an example of ACLs based on client addresses: + +:: + + // Set up an ACL named "bogusnets" that blocks + // RFC1918 space and some reserved space, which is + // commonly used in spoofing attacks. + acl bogusnets { + 0.0.0.0/8; 192.0.2.0/24; 224.0.0.0/3; + 10.0.0.0/8; 172.16.0.0/12; 192.168.0.0/16; + }; + + // Set up an ACL called our-nets. Replace this with the + // real IP numbers. + acl our-nets { x.x.x.x/24; x.x.x.x/21; }; + options { + ... + ... + allow-query { our-nets; }; + allow-recursion { our-nets; }; + ... + blackhole { bogusnets; }; + ... + }; + + zone "example.com" { + type primary; + file "m/example.com"; + allow-query { any; }; + }; + +This allows authoritative queries for ``example.com`` from any address, +but recursive queries only from the networks specified in ``our-nets``, +and no queries at all from the networks specified in ``bogusnets``. + +In addition to network addresses and prefixes, which are matched against +the source address of the DNS request, ACLs may include ``key`` +elements, which specify the name of a TSIG or SIG(0) key. + +When BIND 9 is built with GeoIP support, ACLs can also be used for +geographic access restrictions. This is done by specifying an ACL +element of the form: ``geoip db database field value``. + +The ``field`` parameter indicates which field to search for a match. Available fields +are ``country``, ``region``, ``city``, ``continent``, ``postal`` (postal code), +``metro`` (metro code), ``area`` (area code), ``tz`` (timezone), ``isp``, +``asnum``, and ``domain``. + +``value`` is the value to search for within the database. A string may be quoted +if it contains spaces or other special characters. An ``asnum`` search for +autonomous system number can be specified using the string "ASNNNN" or the +integer NNNN. If a ``country`` search is specified with a string that is two characters +long, it must be a standard ISO-3166-1 two-letter country code; otherwise, +it is interpreted as the full name of the country. Similarly, if +``region`` is the search term and the string is two characters long, it is treated as a +standard two-letter state or province abbreviation; otherwise, it is treated as the +full name of the state or province. + +The :any:`database` field indicates which GeoIP database to search for a match. In +most cases this is unnecessary, because most search fields can only be found in +a single database. However, searches for ``continent`` or ``country`` can be +answered from either the ``city`` or ``country`` databases, so for these search +types, specifying a :any:`database` forces the query to be answered from that +database and no other. If a :any:`database` is not specified, these queries +are first answered from the ``city`` database if it is installed, and then from the ``country`` +database if it is installed. Valid database names are ``country``, +``city``, ``asnum``, ``isp``, and ``domain``. + +Some example GeoIP ACLs: + +:: + + geoip country US; + geoip country JP; + geoip db country country Canada; + geoip region WA; + geoip city "San Francisco"; + geoip region Oklahoma; + geoip postal 95062; + geoip tz "America/Los_Angeles"; + geoip org "Internet Systems Consortium"; + +ACLs use a "first-match" logic rather than "best-match"; if an address +prefix matches an ACL element, then that ACL is considered to have +matched even if a later element would have matched more specifically. +For example, the ACL ``{ 10/8; !10.0.0.1; }`` would actually match a +query from 10.0.0.1, because the first element indicates that the query +should be accepted, and the second element is ignored. + +When using "nested" ACLs (that is, ACLs included or referenced within +other ACLs), a negative match of a nested ACL tells the containing ACL to +continue looking for matches. This enables complex ACLs to be +constructed, in which multiple client characteristics can be checked at +the same time. For example, to construct an ACL which allows a query +only when it originates from a particular network *and* only when it is +signed with a particular key, use: + +:: + + allow-query { !{ !10/8; any; }; key example; }; + +Within the nested ACL, any address that is *not* in the 10/8 network +prefix is rejected, which terminates the processing of the ACL. +Any address that *is* in the 10/8 network prefix is accepted, but +this causes a negative match of the nested ACL, so the containing ACL +continues processing. The query is accepted if it is signed by +the key ``example``, and rejected otherwise. The ACL, then, only +matches when *both* conditions are true. + +.. _chroot_and_setuid: + +``Chroot`` and ``Setuid`` +------------------------- + +On Unix servers, it is possible to run BIND in a *chrooted* environment +(using the ``chroot()`` function) by specifying the :option:`-t <named -t>` option for +:iscman:`named`. This can help improve system security by placing BIND in a +"sandbox," which limits the damage done if a server is compromised. + +Another useful feature in the Unix version of BIND is the ability to run +the daemon as an unprivileged user (:option:`-u <named -u>` user). We suggest running +as an unprivileged user when using the ``chroot`` feature. + +Here is an example command line to load BIND in a ``chroot`` sandbox, +``/var/named``, and to run :iscman:`named` ``setuid`` to user 202: + +``/usr/local/sbin/named -u 202 -t /var/named`` + +.. _chroot: + +The ``chroot`` Environment +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +For a ``chroot`` environment to work properly in a particular +directory (for example, ``/var/named``), the +environment must include everything BIND needs to run. From BIND's +point of view, ``/var/named`` is the root of the filesystem; +the values of options like :any:`directory` and :any:`pid-file` +must be adjusted to account for this. + +Unlike with earlier versions of BIND, +:iscman:`named` does *not* typically need to be compiled statically, nor do shared libraries need to be installed under the new +root. However, depending on the operating system, it may be necessary to set +up locations such as ``/dev/zero``, ``/dev/random``, ``/dev/log``, and +``/etc/localtime``. + +.. _setuid: + +Using the ``setuid`` Function +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Prior to running the :iscman:`named` daemon, use the ``touch`` utility (to +change file access and modification times) or the ``chown`` utility (to +set the user id and/or group id) on files where BIND should +write. + +.. note:: + + If the :iscman:`named` daemon is running as an unprivileged user, it + cannot bind to new restricted ports if the server is + reloaded. + +.. _dynamic_update_security: + +Dynamic Update Security +----------------------- + +Access to the dynamic update facility should be strictly limited. In +earlier versions of BIND, the only way to do this was based on the IP +address of the host requesting the update, by listing an IP address or +network prefix in the :any:`allow-update` zone option. This method is +insecure, since the source address of the update UDP packet is easily +forged. Also note that if the IP addresses allowed by the +:any:`allow-update` option include the address of a secondary server which +performs forwarding of dynamic updates, the primary can be trivially +attacked by sending the update to the secondary, which forwards it to +the primary with its own source IP address - causing the primary to approve +it without question. + +For these reasons, we strongly recommend that updates be +cryptographically authenticated by means of transaction signatures +(TSIG). That is, the :any:`allow-update` option should list only TSIG key +names, not IP addresses or network prefixes. Alternatively, the +:any:`update-policy` option can be used. + +Some sites choose to keep all dynamically updated DNS data in a +subdomain and delegate that subdomain to a separate zone. This way, the +top-level zone containing critical data, such as the IP addresses of +public web and mail servers, need not allow dynamic updates at all. + +.. _sec_file_transfer: + +.. _dns_over_tls: diff --git a/doc/arm/sig0.inc.rst b/doc/arm/sig0.inc.rst new file mode 100644 index 0000000..048dbea --- /dev/null +++ b/doc/arm/sig0.inc.rst @@ -0,0 +1,28 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +SIG(0) +------ + +BIND partially supports DNSSEC SIG(0) transaction signatures as +specified in :rfc:`2535` and :rfc:`2931`. SIG(0) uses public/private keys to +authenticate messages. Access control is performed in the same manner as with +TSIG keys; privileges can be granted or denied in ACL directives based +on the key name. + +When a SIG(0) signed message is received, it is only verified if +the key is known and trusted by the server. The server does not attempt +to recursively fetch or validate the key. + +SIG(0) signing of multiple-message TCP streams is not supported. + +The only tool shipped with BIND 9 that generates SIG(0) signed messages +is :iscman:`nsupdate`. diff --git a/doc/arm/tkey.inc.rst b/doc/arm/tkey.inc.rst new file mode 100644 index 0000000..bc854e3 --- /dev/null +++ b/doc/arm/tkey.inc.rst @@ -0,0 +1,40 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +TKEY +---- + +TKEY (Transaction KEY) is a mechanism for automatically negotiating a +shared secret between two hosts, originally specified in :rfc:`2930`. + +There are several TKEY "modes" that specify how a key is to be generated +or assigned. BIND 9 implements only one of these modes: Diffie-Hellman +key exchange. Both hosts are required to have a KEY record with +algorithm DH (though this record is not required to be present in a +zone). + +The TKEY process is initiated by a client or server by sending a query +of type TKEY to a TKEY-aware server. The query must include an +appropriate KEY record in the additional section, and must be signed +using either TSIG or SIG(0) with a previously established key. The +server's response, if successful, contains a TKEY record in its +answer section. After this transaction, both participants have +enough information to calculate a shared secret using Diffie-Hellman key +exchange. The shared secret can then be used to sign subsequent +transactions between the two servers. + +TSIG keys known by the server, including TKEY-negotiated keys, can be +listed using :option:`rndc tsig-list`. + +TKEY-negotiated keys can be deleted from a server using +:option:`rndc tsig-delete`. This can also be done via the TKEY protocol +itself, by sending an authenticated TKEY query specifying the "key +deletion" mode. diff --git a/doc/arm/troubleshooting.inc.rst b/doc/arm/troubleshooting.inc.rst new file mode 100644 index 0000000..a2d81a9 --- /dev/null +++ b/doc/arm/troubleshooting.inc.rst @@ -0,0 +1,160 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _troubleshooting: + +Troubleshooting +=============== + +.. _common_problems: + +Common Problems +--------------- + +It's Not Working; How Can I Figure Out What's Wrong? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The best solution to installation and configuration issues is to +take preventive measures by setting up logging files beforehand. The +log files provide hints and information that can be used to +identify anything that went wrong and fix the problem. + +EDNS Compliance Issues +~~~~~~~~~~~~~~~~~~~~~~ + +EDNS (Extended DNS) is a standard that was first specified in 1999. It +is required for DNSSEC validation, DNS COOKIE options, and other +features. There are broken and outdated DNS servers and firewalls still +in use which misbehave when queried with EDNS; for example, they may +drop EDNS queries rather than replying with FORMERR. BIND and other +recursive name servers have traditionally employed workarounds in this +situation, retrying queries in different ways and eventually falling +back to plain DNS queries without EDNS. + +Such workarounds cause unnecessary resolution delays, increase code +complexity, and prevent deployment of new DNS features. In February +2019, all major DNS software vendors removed these +workarounds; see https://dnsflagday.net/2019 for further details. This change +was implemented in BIND as of release 9.14.0. + +As a result, some domains may be non-resolvable without manual +intervention. In these cases, resolution can be restored by adding +:namedconf:ref:`server` clauses for the offending servers, or by specifying ``edns no`` or +``send-cookie no``, depending on the specific noncompliance. + +To determine which :namedconf:ref:`server` clause to use, run the following commands +to send queries to the authoritative servers for the broken domain: + +:: + + dig soa <zone> @<server> +dnssec + dig soa <zone> @<server> +dnssec +nocookie + dig soa <zone> @<server> +noedns + + +If the first command fails but the second succeeds, the server most +likely needs ``send-cookie no``. If the first two fail but the third +succeeds, then the server needs EDNS to be fully disabled with +``edns no``. + +Please contact the administrators of noncompliant domains and encourage +them to upgrade their broken DNS servers. + +Inspecting Encrypted DNS Traffic +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +.. note:: + + This feature requires support from the cryptographic library that + BIND 9 is built against. For OpenSSL, version 1.1.1 or newer is + required (use :option:`named -V` to check). + +By definition, TLS-encrypted traffic (e.g. DNS over TLS, DNS over HTTPS) +is opaque to packet sniffers, which makes debugging problems with +encrypted DNS close to impossible. However, Wireshark_ offers a +solution_ to this problem by being able to read key log files. In order +to make :iscman:`named` prepare such a file, set the ``SSLKEYLOGFILE`` +environment variable to either: + +- the string ``config`` (``SSLKEYLOGFILE=config``); this requires + defining a :any:`logging` :any:`channel` which will + handle messages belonging to the ``sslkeylog`` category, + +- the path to the key file to write (``SSLKEYLOGFILE=/path/to/file``); + this is equivalent to the following :any:`logging` configuration: + + :: + + channel default_sslkeylogfile { + file "${SSLKEYLOGFILE}" versions 10 size 100m suffix timestamp; + }; + + category sslkeylog { + default_sslkeylogfile; + }; + +.. note:: + + When using ``SSLKEYLOGFILE=config``, augmenting the log channel + output using options like :any:`print-time` or :any:`print-severity` is + strongly discouraged as it will likely make the key log file + unusable. + +When the ``SSLKEYLOGFILE`` environment variable is set, each TLS +connection established by :iscman:`named` (both incoming and outgoing) causes +about 1 kilobyte of data to be written to the key log file. + +.. warning:: + + Due to the limitations of the current logging code in BIND 9, + enabling TLS pre-master secret logging adversely affects :iscman:`named` + performance. + +.. _Wireshark: https://www.wireshark.org/ +.. _solution: https://wiki.wireshark.org/TLS#tls-decryption + +Incrementing and Changing the Serial Number +------------------------------------------- + +Zone serial numbers are just numbers — they are not date-related. However, many +people set them to a number that represents a date, usually of the +form YYYYMMDDRR. Occasionally they make a mistake and set the serial number to a +date in the future, then try to correct it by setting it to the +current date. This causes problems because serial numbers are used to +indicate that a zone has been updated. If the serial number on the secondary +server is lower than the serial number on the primary, the secondary server +attempts to update its copy of the zone. + +Setting the serial number to a lower number on the primary server than the one +on the secondary server means that the secondary will not perform updates to its +copy of the zone. + +The solution to this is to add 2147483647 (2^31-1) to the number, reload +the zone and make sure all secondaries have updated to the new zone serial +number, then reset it to the desired number and reload the +zone again. + +.. _more_help: + +Where Can I Get Help? +--------------------- +The BIND-users mailing list, at https://lists.isc.org/mailman/listinfo/bind-users, is an excellent resource for +peer user support. In addition, ISC maintains a Knowledgebase of helpful articles +at https://kb.isc.org. + +Internet Systems Consortium (ISC) offers annual support agreements +for BIND 9, ISC DHCP, and Kea DHCP. +All paid support contracts include advance security notifications; some levels include +service level agreements (SLAs), premium software features, and increased priority on bug fixes +and feature requests. + +Please contact info@isc.org or visit +https://www.isc.org/contact/ for more information. diff --git a/doc/arm/tsig.inc.rst b/doc/arm/tsig.inc.rst new file mode 100644 index 0000000..6840692 --- /dev/null +++ b/doc/arm/tsig.inc.rst @@ -0,0 +1,165 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _tsig: + +TSIG +---- + +TSIG (Transaction SIGnatures) is a mechanism for authenticating DNS +messages, originally specified in :rfc:`2845`. It allows DNS messages to be +cryptographically signed using a shared secret. TSIG can be used in any +DNS transaction, as a way to restrict access to certain server functions +(e.g., recursive queries) to authorized clients when IP-based access +control is insufficient or needs to be overridden, or as a way to ensure +message authenticity when it is critical to the integrity of the server, +such as with dynamic UPDATE messages or zone transfers from a primary to +a secondary server. + +This section is a guide to setting up TSIG in BIND. It describes the +configuration syntax and the process of creating TSIG keys. + +:iscman:`named` supports TSIG for server-to-server communication, and some of +the tools included with BIND support it for sending messages to +:iscman:`named`: + + * :ref:`man_nsupdate` supports TSIG via the :option:`-k <nsupdate -k>`, :option:`-l <nsupdate -l>`, and :option:`-y <nsupdate -y>` command-line options, or via the ``key`` command when running interactively. + * :ref:`man_dig` supports TSIG via the :option:`-k <dig -k>` and :option:`-y <dig -y>` command-line options. + +Generating a Shared Key +~~~~~~~~~~~~~~~~~~~~~~~ + +TSIG keys can be generated using the :iscman:`tsig-keygen` command; the output +of the command is a ``key`` directive suitable for inclusion in +:iscman:`named.conf`. The key name, algorithm, and size can be specified by +command-line parameters; the defaults are "tsig-key", HMAC-SHA256, and +256 bits, respectively. + +Any string which is a valid DNS name can be used as a key name. For +example, a key to be shared between servers called ``host1`` and ``host2`` +could be called "host1-host2.", and this key can be generated using: + +:: + + $ tsig-keygen host1-host2. > host1-host2.key + +This key may then be copied to both hosts. The key name and secret must +be identical on both hosts. (Note: copying a shared secret from one +server to another is beyond the scope of the DNS. A secure transport +mechanism should be used: secure FTP, SSL, ssh, telephone, encrypted +email, etc.) + +:iscman:`tsig-keygen` can also be run as :iscman:`ddns-confgen`, in which case its +output includes additional configuration text for setting up dynamic DNS +in :iscman:`named`. See :ref:`man_ddns-confgen` for details. + +Loading a New Key +~~~~~~~~~~~~~~~~~ + +For a key shared between servers called ``host1`` and ``host2``, the +following could be added to each server's :iscman:`named.conf` file: + +:: + + key "host1-host2." { + algorithm hmac-sha256; + secret "DAopyf1mhCbFVZw7pgmNPBoLUq8wEUT7UuPoLENP2HY="; + }; + +(This is the same key generated above using :iscman:`tsig-keygen`.) + +Since this text contains a secret, it is recommended that either +:iscman:`named.conf` not be world-readable, or that the ``key`` directive be +stored in a file which is not world-readable and which is included in +:iscman:`named.conf` via the ``include`` directive. + +Once a key has been added to :iscman:`named.conf` and the server has been +restarted or reconfigured, the server can recognize the key. If the +server receives a message signed by the key, it is able to verify +the signature. If the signature is valid, the response is signed +using the same key. + +TSIG keys that are known to a server can be listed using the command +:option:`rndc tsig-list`. + +Instructing the Server to Use a Key +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +A server sending a request to another server must be told whether to use +a key, and if so, which key to use. + +For example, a key may be specified for each server in the :any:`primaries` +statement in the definition of a secondary zone; in this case, all SOA QUERY +messages, NOTIFY messages, and zone transfer requests (AXFR or IXFR) +are signed using the specified key. Keys may also be specified in +the :any:`also-notify` statement of a primary or secondary zone, causing NOTIFY +messages to be signed using the specified key. + +Keys can also be specified in a :namedconf:ref:`server` directive. Adding the +following on ``host1``, if the IP address of ``host2`` is 10.1.2.3, would +cause *all* requests from ``host1`` to ``host2``, including normal DNS +queries, to be signed using the ``host1-host2.`` key: + +:: + + server 10.1.2.3 { + keys { host1-host2. ;}; + }; + +Multiple keys may be present in the :any:`keys` statement, but only the +first one is used. As this directive does not contain secrets, it can be +used in a world-readable file. + +Requests sent by ``host2`` to ``host1`` would *not* be signed, unless a +similar ``server`` directive were in ``host2``'s configuration file. + +When any server sends a TSIG-signed DNS request, it expects the +response to be signed with the same key. If a response is not signed, or +if the signature is not valid, the response is rejected. + +TSIG-Based Access Control +~~~~~~~~~~~~~~~~~~~~~~~~~ + +TSIG keys may be specified in ACL definitions and ACL directives such as +:any:`allow-query`, :any:`allow-transfer`, and :any:`allow-update`. The above key +would be denoted in an ACL element as ``key host1-host2.`` + +Here is an example of an :any:`allow-update` directive using a TSIG key: + +:: + + allow-update { !{ !localnets; any; }; key host1-host2. ;}; + +This allows dynamic updates to succeed only if the UPDATE request comes +from an address in ``localnets``, *and* if it is signed using the +``host1-host2.`` key. + +See :ref:`dynamic_update_policies` for a +discussion of the more flexible :any:`update-policy` statement. + +Errors +~~~~~~ + +Processing of TSIG-signed messages can result in several errors: + +- If a TSIG-aware server receives a message signed by an unknown key, + the response will be unsigned, with the TSIG extended error code set + to BADKEY. +- If a TSIG-aware server receives a message from a known key but with + an invalid signature, the response will be unsigned, with the TSIG + extended error code set to BADSIG. +- If a TSIG-aware server receives a message with a time outside of the + allowed range, the response will be signed but the TSIG extended + error code set to BADTIME, and the time values will be adjusted so + that the response can be successfully verified. + +In all of the above cases, the server returns a response code of +NOTAUTH (not authenticated). diff --git a/doc/arm/zones.inc.rst b/doc/arm/zones.inc.rst new file mode 100644 index 0000000..34afe37 --- /dev/null +++ b/doc/arm/zones.inc.rst @@ -0,0 +1,501 @@ +.. Copyright (C) Internet Systems Consortium, Inc. ("ISC") +.. +.. SPDX-License-Identifier: MPL-2.0 +.. +.. This Source Code Form is subject to the terms of the Mozilla Public +.. License, v. 2.0. If a copy of the MPL was not distributed with this +.. file, you can obtain one at https://mozilla.org/MPL/2.0/. +.. +.. See the COPYRIGHT file distributed with this work for additional +.. information regarding copyright ownership. + +.. _zone_file: + +.. _soa_rr: + +Zone File +--------- + +This section, largely borrowed from :rfc:`1034`, describes the concept of a +Resource Record (RR) and explains how to use them. + +Resource Records +~~~~~~~~~~~~~~~~ + +A domain name identifies a node in the DNS tree namespace. Each node has a set of resource +information, which may be empty. The set of resource information +associated with a particular name is composed of separate RRs. The order +of RRs in a set is not significant and need not be preserved by name +servers, resolvers, or other parts of the DNS. However, sorting of +multiple RRs is permitted for optimization purposes: for example, to +specify that a particular nearby server be tried first. See +:any:`sortlist` and :ref:`rrset_ordering`. + +The components of a Resource Record are: + +.. glossary:: + + owner name + The domain name where the RR is found. + + RR type + An encoded 16-bit value that specifies the type of the resource record. + For a list of *types* of valid RRs, including those that have been obsoleted, please refer to + `https://www.iana.org/assignments/dns-parameters/dns-parameters.xhtml#dns-parameters-4`. + + TTL + The time-to-live of the RR. This field is a 32-bit integer in units of seconds, + and is primarily used by resolvers when they cache RRs. The TTL describes how long + a RR can be cached before it should be discarded. + + class + An encoded 16-bit value that identifies a protocol family or an instance of a protocol. + + RDATA + The resource data. The format of the data is type- and sometimes class-specific. + + +The following *classes* of resource records are currently valid in the +DNS: + +.. glossary:: + + IN + The Internet. The only widely :term:`class` used today. + + CH + Chaosnet, a LAN protocol created at MIT in the mid-1970s. It was rarely used for its historical purpose, but was reused for BIND's built-in server information zones, e.g., **version.bind**. + + HS + Hesiod, an information service developed by MIT's Project Athena. It was used to share information about various systems databases, such as users, groups, printers, etc. + +The :term:`owner name` is often implicit, rather than forming an integral part +of the RR. For example, many name servers internally form tree or hash +structures for the name space, and chain RRs off nodes. The remaining RR +parts are the fixed header (type, class, TTL), which is consistent for +all RRs, and a variable part (RDATA) that fits the needs of the resource +being described. + +The TTL field is a time limit on how long an RR can be +kept in a cache. This limit does not apply to authoritative data in +zones; that also times out, but follows the refreshing policies for the +zone. The TTL is assigned by the administrator for the zone where the +data originates. While short TTLs can be used to minimize caching, and a +zero TTL prohibits caching, the realities of Internet performance +suggest that these times should be on the order of days for the typical +host. If a change is anticipated, the TTL can be reduced prior to +the change to minimize inconsistency, and then +increased back to its former value following the change. + +The data in the RDATA section of RRs is carried as a combination of +binary strings and domain names. The domain names are frequently used as +"pointers" to other data in the DNS. + +.. _rr_text: + +Textual Expression of RRs +^^^^^^^^^^^^^^^^^^^^^^^^^ + +RRs are represented in binary form in the packets of the DNS protocol, +and are usually represented in highly encoded form when stored in a name +server or resolver. In the examples provided in :rfc:`1034`, a style +similar to that used in primary files was employed in order to show the +contents of RRs. In this format, most RRs are shown on a single line, +although continuation lines are possible using parentheses. + +The start of the line gives the owner of the RR. If a line begins with a +blank, then the owner is assumed to be the same as that of the previous +RR. Blank lines are often included for readability. + +Following the owner are listed the TTL, type, and class of the RR. Class +and type use the mnemonics defined above, and TTL is an integer before +the type field. To avoid ambiguity in parsing, type and class +mnemonics are disjoint, TTLs are integers, and the type mnemonic is +always last. The IN class and TTL values are often omitted from examples +in the interest of clarity. + +The resource data or RDATA section of the RR is given using knowledge +of the typical representation for the data. + +For example, the RRs carried in a message might be shown as: + + +---------------------+---------------+--------------------------------+ + | **ISI.EDU.** | **MX** | **10 VENERA.ISI.EDU.** | + +---------------------+---------------+--------------------------------+ + | | **MX** | **10 VAXA.ISI.EDU** | + +---------------------+---------------+--------------------------------+ + | **VENERA.ISI.EDU** | **A** | **128.9.0.32** | + +---------------------+---------------+--------------------------------+ + | | **A** | **10.1.0.52** | + +---------------------+---------------+--------------------------------+ + | **VAXA.ISI.EDU** | **A** | **10.2.0.27** | + +---------------------+---------------+--------------------------------+ + | | **A** | **128.9.0.33** | + +---------------------+---------------+--------------------------------+ + +The MX RRs have an RDATA section which consists of a 16-bit number +followed by a domain name. The address RRs use a standard IP address +format to contain a 32-bit Internet address. + +The above example shows six RRs, with two RRs at each of three domain +names. + +Here is another possible example: + + +----------------------+---------------+-------------------------------+ + | **XX.LCS.MIT.EDU.** | **IN A** | **10.0.0.44** | + +----------------------+---------------+-------------------------------+ + | | **CH A** | **MIT.EDU. 2420** | + +----------------------+---------------+-------------------------------+ + +This shows two addresses for **XX.LCS.MIT.EDU**, each of a +different class. + +.. _mx_records: + +Discussion of MX Records +~~~~~~~~~~~~~~~~~~~~~~~~ + +As described above, domain servers store information as a series of +resource records, each of which contains a particular piece of +information about a given domain name (which is usually, but not always, +a host). The simplest way to think of an RR is as a typed pair of data, a +domain name matched with a relevant datum and stored with some +additional type information, to help systems determine when the RR is +relevant. + +MX records are used to control delivery of email. The data specified in +the record is a priority and a domain name. The priority controls the +order in which email delivery is attempted, with the lowest number +first. If two priorities are the same, a server is chosen randomly. If +no servers at a given priority are responding, the mail transport agent +falls back to the next largest priority. Priority numbers do not +have any absolute meaning; they are relevant only respective to other +MX records for that domain name. The domain name given is the machine to +which the mail is delivered. It *must* have an associated address +record (A or AAAA); CNAME is not sufficient. + +For a given domain, if there is both a CNAME record and an MX record, +the MX record is in error and is ignored. Instead, the mail is +delivered to the server specified in the MX record pointed to by the +CNAME. For example: + + +------------------------+--------+--------+--------------+------------------------+ + | **example.com.** | **IN** | **MX** | **10** | **mail.example.com.** | + +------------------------+--------+--------+--------------+------------------------+ + | | **IN** | **MX** | **10** | **mail2.example.com.** | + +------------------------+--------+--------+--------------+------------------------+ + | | **IN** | **MX** | **20** | **mail.backup.org.** | + +------------------------+--------+--------+--------------+------------------------+ + | **mail.example.com.** | **IN** | **A** | **10.0.0.1** | | + +------------------------+--------+--------+--------------+------------------------+ + | **mail2.example.com.** | **IN** | **A** | **10.0.0.2** | | + +------------------------+--------+--------+--------------+------------------------+ + +Mail delivery is attempted to **mail.example.com** and +**mail2.example.com** (in any order); if neither of those succeeds, +delivery to **mail.backup.org** is attempted. + +.. _Setting_TTLs: + +Setting TTLs +~~~~~~~~~~~~ + +The time-to-live (TTL) of the RR field is a 32-bit integer represented in +units of seconds, and is primarily used by resolvers when they cache +RRs. The TTL describes how long an RR can be cached before it should be +discarded. The following three types of TTLs are currently used in a zone +file. + +.. glossary:: + + SOA minimum + The last field in the SOA is the negative caching TTL. + This controls how long other servers cache no-such-domain (NXDOMAIN) + responses from this server. Further details can be found in :rfc:`2308`. + + The maximum time for negative caching is 3 hours (3h). + + $TTL + The $TTL directive at the top of the zone file (before the SOA) gives a default TTL for every RR without a specific TTL set. + + RR TTLs + Each RR can have a TTL as the second field in the RR, which controls how long other servers can cache it. + +All of these TTLs default to units of seconds, though units can be +explicitly specified: for example, **1h30m**. + +.. _ipv4_reverse: + +Inverse Mapping in IPv4 +~~~~~~~~~~~~~~~~~~~~~~~ + +Reverse name resolution (that is, translation from IP address to name) +is achieved by means of the **in-addr.arpa** domain and PTR records. +Entries in the in-addr.arpa domain are made in least-to-most significant +order, read left to right. This is the opposite order to the way IP +addresses are usually written. Thus, a machine with an IP address of +10.1.2.3 would have a corresponding in-addr.arpa name of +3.2.1.10.in-addr.arpa. This name should have a PTR resource record whose +data field is the name of the machine or, optionally, multiple PTR +records if the machine has more than one name. For example, in the +**example.com** domain: + + +--------------+-------------------------------------------------------+ + | **$ORIGIN** | **2.1.10.in-addr.arpa** | + +--------------+-------------------------------------------------------+ + | **3** | **IN PTR foo.example.com.** | + +--------------+-------------------------------------------------------+ + +.. note:: + + The **$ORIGIN** line in this example is only to provide context; + it does not necessarily appear in the actual + usage. It is only used here to indicate that the example is + relative to the listed origin. + +.. _zone_directives: + +Other Zone File Directives +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The DNS "master file" format was initially defined in :rfc:`1035` and has +subsequently been extended. While the format itself is class-independent, +all records in a zone file must be of the same class. + +Master file directives include **$ORIGIN**, **$INCLUDE**, and **$TTL.** + +.. _atsign: + +The **@** (at-sign) +^^^^^^^^^^^^^^^^^^^ + +When used in the label (or name) field, the asperand or at-sign (@) +symbol represents the current origin. At the start of the zone file, it +is the <**zone_name**>, followed by a trailing dot (.). + +.. _origin_directive: + +The **$ORIGIN** Directive +^^^^^^^^^^^^^^^^^^^^^^^^^ + +Syntax: **$ORIGIN** domain-name [comment] + +**$ORIGIN** sets the domain name that is appended to any +unqualified records. When a zone is first read, there is an implicit +``$ORIGIN <zone_name>.``; note the trailing dot. The +current **$ORIGIN** is appended to the domain specified in the +**$ORIGIN** argument if it is not absolute. + +:: + + $ORIGIN example.com. + WWW CNAME MAIN-SERVER + +is equivalent to + +:: + + WWW.EXAMPLE.COM. CNAME MAIN-SERVER.EXAMPLE.COM. + +The **$INCLUDE** Directive +^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Syntax: **$INCLUDE** filename [origin] [comment] + +This reads and processes the file **filename** as if it were included in the +file at this point. The **filename** can be an absolute path, or a relative +path. In the latter case it is read from :iscman:`named`'s working directory. If +**origin** is specified, the file is processed with **$ORIGIN** set to that +value; otherwise, the current **$ORIGIN** is used. + +The origin and the current domain name revert to the values they had +prior to the **$INCLUDE** once the file has been read. + +.. note:: + + :rfc:`1035` specifies that the current origin should be restored after + an **$INCLUDE**, but it is silent on whether the current domain name + should also be restored. BIND 9 restores both of them. This could be + construed as a deviation from :rfc:`1035`, a feature, or both. + +.. _ttl_directive: + +The **$TTL** Directive +^^^^^^^^^^^^^^^^^^^^^^ + +Syntax: **$TTL** default-ttl [comment] + +This sets the default Time-To-Live (TTL) for subsequent records with undefined +TTLs. Valid TTLs are of the range 0-2147483647 seconds. + +**$TTL** is defined in :rfc:`2308`. + +.. _generate_directive: + +BIND Primary File Extension: the **$GENERATE** Directive +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Syntax: **$GENERATE** range owner [ttl] [class] type rdata [comment] + +**$GENERATE** is used to create a series of resource records that only +differ from each other by an iterator. + +**range** + This can be one of two forms: start-stop or start-stop/step. + If the first form is used, then step is set to 1. "start", + "stop", and "step" must be positive integers between 0 and + (2^31)-1. "start" must not be larger than "stop". + +**owner** + This describes the owner name of the resource records to be created. + + The **owner** string may include one or more **$** (dollar sign) + symbols, which will be replaced with the iterator value when + generating records; see below for details. + +**ttl** + This specifies the time-to-live of the generated records. If + not specified, this is inherited using the normal TTL inheritance + rules. + + **class** and **ttl** can be entered in either order. + +**class** + This specifies the class of the generated records. This must + match the zone class if it is specified. + + **class** and **ttl** can be entered in either order. + +**type** + This can be any valid type. + +**rdata** + This is a string containing the RDATA of the resource record + to be created. As with **owner**, the **rdata** string may + include one or more **$** symbols, which are replaced with the + iterator value. **rdata** may be quoted if there are spaces in + the string; the quotation marks do not appear in the generated + record. + + Any single **$** (dollar sign) symbols within the **owner** or + **rdata** strings are replaced by the iterator value. To get a **$** + in the output, escape the **$** using a backslash **\\**, e.g., + ``\$``. (For compatibility with earlier versions, **$$** is also + recognized as indicating a literal **$** in the output.) + + The **$** may optionally be followed by modifiers which change + the offset from the iterator, field width, and base. Modifiers + are introduced by a **{** (left brace) immediately following + the **$**, as in **${offset[,width[,base]]}**. For example, + **${-20,3,d}** subtracts 20 from the current value and prints + the result as a decimal in a zero-padded field of width 3. + Available output forms are decimal (**d**), octal (**o**), + hexadecimal (**x** or **X** for uppercase), and nibble (**n** + or **N** for uppercase). The modfiier cannot contain whitespace + or newlines. + + The default modifier is **${0,0,d}**. If the **owner** is not + absolute, the current **$ORIGIN** is appended to the name. + + In nibble mode, the value is treated as if it were a reversed + hexadecimal string, with each hexadecimal digit as a separate + label. The width field includes the label separator. + +Examples: + +**$GENERATE** can be used to easily generate the sets of records required +to support sub-/24 reverse delegations described in :rfc:`2317`: + +:: + + $ORIGIN 0.0.192.IN-ADDR.ARPA. + $GENERATE 1-2 @ NS SERVER$.EXAMPLE. + $GENERATE 1-127 $ CNAME $.0 + +is equivalent to + +:: + + 0.0.0.192.IN-ADDR.ARPA. NS SERVER1.EXAMPLE. + 0.0.0.192.IN-ADDR.ARPA. NS SERVER2.EXAMPLE. + 1.0.0.192.IN-ADDR.ARPA. CNAME 1.0.0.0.192.IN-ADDR.ARPA. + 2.0.0.192.IN-ADDR.ARPA. CNAME 2.0.0.0.192.IN-ADDR.ARPA. + ... + 127.0.0.192.IN-ADDR.ARPA. CNAME 127.0.0.0.192.IN-ADDR.ARPA. + +This example creates a set of A and MX records. Note the MX's **rdata** +is a quoted string; the quotes are stripped when **$GENERATE** is processed: + +:: + + $ORIGIN EXAMPLE. + $GENERATE 1-127 HOST-$ A 1.2.3.$ + $GENERATE 1-127 HOST-$ MX "0 ." + +is equivalent to + +:: + + HOST-1.EXAMPLE. A 1.2.3.1 + HOST-1.EXAMPLE. MX 0 . + HOST-2.EXAMPLE. A 1.2.3.2 + HOST-2.EXAMPLE. MX 0 . + HOST-3.EXAMPLE. A 1.2.3.3 + HOST-3.EXAMPLE. MX 0 . + ... + HOST-127.EXAMPLE. A 1.2.3.127 + HOST-127.EXAMPLE. MX 0 . + + +This example generates A and AAAA records using modifiers; the AAAA +**owner** names are generated using nibble mode: + +:: + + $ORIGIN EXAMPLE. + $GENERATE 0-2 HOST-${0,4,d} A 1.2.3.${1,0,d} + $GENERATE 1024-1026 ${0,3,n} AAAA 2001:db8::${0,4,x} + +is equivalent to: + +:: + + HOST-0000.EXAMPLE. A 1.2.3.1 + HOST-0001.EXAMPLE. A 1.2.3.2 + HOST-0002.EXAMPLE. A 1.2.3.3 + 0.0.4.EXAMPLE. AAAA 2001:db8::400 + 1.0.4.EXAMPLE. AAAA 2001:db8::401 + 2.0.4.EXAMPLE. AAAA 2001:db8::402 + +The **$GENERATE** directive is a BIND extension and not part of the +standard zone file format. + +.. _zonefile_format: + +Additional File Formats +~~~~~~~~~~~~~~~~~~~~~~~ + +In addition to the standard text format, BIND 9 supports the ability +to read or dump to zone files in other formats. + +The **raw** format is a binary representation of zone data in a manner +similar to that used in zone transfers. Since it does not require +parsing text, load time is significantly reduced. + +For a primary server, a zone file in **raw** format is expected +to be generated from a text zone file by the :iscman:`named-compilezone` command. +For a secondary server or a dynamic zone, the zone file is automatically +generated when :iscman:`named` dumps the zone contents after zone transfer or +when applying prior updates, if one of these formats is specified by the +**masterfile-format** option. + +If a zone file in **raw** format needs manual modification, it first must +be converted to **text** format by the :iscman:`named-compilezone` command, +then converted back after editing. For example: + +:: + + named-compilezone -f raw -F text -o zonefile.text <origin> zonefile.raw + [edit zonefile.text] + named-compilezone -f text -F raw -o zonefile.raw <origin> zonefile.text |
