summaryrefslogtreecommitdiffstats
path: root/doc/dnssec-guide
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--doc/dnssec-guide/advanced-discussions.rst1089
-rw-r--r--doc/dnssec-guide/commonly-asked-questions.rst172
-rw-r--r--doc/dnssec-guide/getting-started.rst147
-rw-r--r--doc/dnssec-guide/img/add-ds-1.pngbin0 -> 290596 bytes
-rw-r--r--doc/dnssec-guide/img/add-ds-2.pngbin0 -> 93324 bytes
-rw-r--r--doc/dnssec-guide/img/add-ds-3.pngbin0 -> 49418 bytes
-rw-r--r--doc/dnssec-guide/img/add-ds-4.pngbin0 -> 87273 bytes
-rw-r--r--doc/dnssec-guide/img/add-ds-5.pngbin0 -> 48202 bytes
-rw-r--r--doc/dnssec-guide/img/add-ds-6.pngbin0 -> 70617 bytes
-rw-r--r--doc/dnssec-guide/img/dnssec-12-steps.pngbin0 -> 91732 bytes
-rw-r--r--doc/dnssec-guide/img/dnssec-8-steps.pngbin0 -> 82495 bytes
-rw-r--r--doc/dnssec-guide/img/dnssec-inline-signing-1.pngbin0 -> 118780 bytes
-rw-r--r--doc/dnssec-guide/img/dnssec-inline-signing-2.pngbin0 -> 138019 bytes
-rw-r--r--doc/dnssec-guide/img/dnsviz-example-small.pngbin0 -> 116889 bytes
-rw-r--r--doc/dnssec-guide/img/remove-ds-1.pngbin0 -> 86552 bytes
-rw-r--r--doc/dnssec-guide/img/remove-ds-2.pngbin0 -> 58176 bytes
-rw-r--r--doc/dnssec-guide/img/remove-ds-3.pngbin0 -> 62774 bytes
-rw-r--r--doc/dnssec-guide/img/signature-generation.pngbin0 -> 19920 bytes
-rw-r--r--doc/dnssec-guide/img/signature-verification.pngbin0 -> 32267 bytes
-rw-r--r--doc/dnssec-guide/img/unsign-1.pngbin0 -> 216627 bytes
-rw-r--r--doc/dnssec-guide/img/unsign-2.pngbin0 -> 86552 bytes
-rw-r--r--doc/dnssec-guide/img/unsign-3.pngbin0 -> 70314 bytes
-rw-r--r--doc/dnssec-guide/img/unsign-4.pngbin0 -> 63392 bytes
-rw-r--r--doc/dnssec-guide/img/verisign-dnssec-debugger-example.pngbin0 -> 70292 bytes
-rw-r--r--doc/dnssec-guide/introduction.rst394
-rw-r--r--doc/dnssec-guide/preface.rst83
-rw-r--r--doc/dnssec-guide/recipes.rst1084
-rw-r--r--doc/dnssec-guide/signing.rst1474
-rw-r--r--doc/dnssec-guide/troubleshooting.rst589
-rw-r--r--doc/dnssec-guide/validation.rst864
30 files changed, 5896 insertions, 0 deletions
diff --git a/doc/dnssec-guide/advanced-discussions.rst b/doc/dnssec-guide/advanced-discussions.rst
new file mode 100644
index 0000000..90b919a
--- /dev/null
+++ b/doc/dnssec-guide/advanced-discussions.rst
@@ -0,0 +1,1089 @@
+.. Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+..
+.. SPDX-License-Identifier: MPL-2.0
+..
+.. This Source Code Form is subject to the terms of the Mozilla Public
+.. License, v. 2.0. If a copy of the MPL was not distributed with this
+.. file, you can obtain one at https://mozilla.org/MPL/2.0/.
+..
+.. See the COPYRIGHT file distributed with this work for additional
+.. information regarding copyright ownership.
+
+.. _dnssec_advanced_discussions:
+
+Advanced Discussions
+--------------------
+
+.. _signature_validity_periods:
+
+Signature Validity Periods and Zone Re-Signing Intervals
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+In :ref:`how_are_answers_verified`, we saw that record signatures
+have a validity period outside of which they are not valid. This means
+that at some point, a signature will no longer be valid and a query for
+the associated record will fail DNSSEC validation. But how long should a
+signature be valid for?
+
+The maximum value for the validity period should be determined by the impact of a
+replay attack: if this is low, the period can be long; if high,
+the period should be shorter. There is no "right" value, but periods of
+between a few days to a month are common.
+
+Deciding a minimum value is probably an easier task. Should something
+fail (e.g., a hidden primary distributing to secondary servers that
+actually answer queries), how long will it take before the failure is
+noticed, and how long before it is fixed? If you are a large 24x7
+operation with operators always on-site, the answer might be less than
+an hour. In smaller companies, if the failure occurs
+just after everyone has gone home for a long weekend, the answer might
+be several days.
+
+Again, there are no "right" values - they depend on your circumstances. The
+signature validity period you decide to use should be a value between
+the two bounds. At the time of this writing (mid-2020), the default policy used by BIND
+sets a value of 14 days.
+
+To keep the zone valid, the signatures must be periodically refreshed
+since they expire - i.e., the zone must be periodically
+re-signed. The frequency of the re-signing depends on your network's
+individual needs. For example, signing puts a load on your server, so if
+the server is very highly loaded, a lower re-signing frequency is better. Another
+consideration is the signature lifetime: obviously the intervals between
+signings must not be longer than the signature validity period. But if
+you have set a signature lifetime close to the minimum (see above), the
+signing interval must be much shorter. What would happen if the system
+failed just before the zone was re-signed?
+
+Again, there is no single "right" answer; it depends on your circumstances. The
+BIND 9 default policy sets the signature refresh interval to 5 days.
+
+.. _advanced_discussions_proof_of_nonexistence:
+
+Proof of Non-Existence (NSEC and NSEC3)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+How do you prove that something does not exist? This zen-like question
+is an interesting one, and in this section we provide an overview
+of how DNSSEC solves the problem.
+
+Why is it even important to have authenticated denial of existence in DNS?
+Couldn't we just send back "hey, what you asked for does not exist,"
+and somehow generate a digital signature to go with it, proving it
+really is from the correct authoritative source? Aside from the technical
+challenge of signing something that doesn't exist, this solution has flaws, one of
+which is it gives an attacker a way to create the appearance of denial
+of service by replaying this message on the network.
+
+Let's use a little story, told three different ways, to
+illustrate how proof of nonexistence works. In our story, we run a small
+company with three employees: Alice, Edward, and Susan. For reasons that
+are far too complicated to go into, they don't have email accounts;
+instead, email for them is sent to a single account and a nameless
+intern passes the message to them. The intern has access to our private
+DNSSEC key to create signatures for their responses.
+
+If we followed the approach of giving back the same answer no matter
+what was asked, when people emailed and asked for the message to be
+passed to "Bob," our intern would simply answer "Sorry, that person
+doesn’t work here" and sign this message. This answer could be validated
+because our intern signed the response with our private DNSSEC key.
+However, since the signature doesn’t change, an attacker could record
+this message. If the attacker were able to intercept our email, when the next
+person emailed asking for the message to be passed to Susan, the attacker
+could return the exact same message: "Sorry, that person doesn’t work
+here," with the same signature. Now the attacker has successfully fooled
+the sender into thinking that Susan doesn’t work at our company, and
+might even be able to convince all senders that no one works at this
+company.
+
+To solve this problem, two different solutions were created. We will
+look at the first one, NSEC, next.
+
+.. _advanced_discussions_nsec:
+.. _NSEC:
+
+NSEC
+^^^^
+
+The NSEC record is used to prove that something does not exist, by
+providing the name before it and the name after it. Using our tiny
+company example, this would be analogous to someone sending an email for
+Bob and our nameless intern responding with with: "I'm sorry, that
+person doesn't work here. The name before the location where 'Bob'
+would be is Alice, and the name after that is Edward." Let's say
+another email was received for a
+non-existent person, this time Oliver; our intern would respond "I'm
+sorry, that person doesn't work here. The name before the location
+where 'Oliver' would be is Edward,
+and the name after that is Susan." If another sender asked for Todd, the
+answer would be: "I'm sorry, that person doesn't work here. The name
+before the location where 'Todd' would be is Susan, and there are no
+other names after that."
+
+So we end up with four NSEC records:
+
+::
+
+ example.com. 300 IN NSEC alice.example.com. A RRSIG NSEC
+ alice.example.com. 300 IN NSEC edward.example.com. A RRSIG NSEC
+ edward.example.com. 300 IN NSEC susan.example.com. A RRSIG NSEC
+ susan.example.com. 300 IN NSEC example.com. A RRSIG NSEC
+
+What if the attacker tried to use the same replay method described
+earlier? If someone sent an email for Edward, none of the four answers
+would fit. If attacker replied with message #2, "I'm sorry, that person
+doesn't work here. The name before it is Alice, and the name after it is
+Edward," it is obviously false, since "Edward" is in the response; and the same
+goes for #3, Edward and Susan. As for #1 and #4, Edward does not fall in
+the alphabetical range before Alice or after Susan, so the sender can logically deduce
+that it was an incorrect answer.
+
+When BIND signs your zone, the zone data is automatically sorted on
+the fly before generating NSEC records, much like how a phone directory
+is sorted.
+
+The NSEC record allows for a proof of non-existence for record types. If
+you ask a signed zone for a name that exists but for a record type that
+doesn't (for that name), the signed NSEC record returned lists all of
+the record types that *do* exist for the requested domain name.
+
+NSEC records can also be used to show whether a record was generated as
+the result of a wildcard expansion. The details of this are not
+within the scope of this document, but are described well in
+:rfc:`7129`.
+
+Unfortunately, the NSEC solution has a few drawbacks, one of which is
+trivial "zone walking." In our story, a curious person can keep sending emails, and
+our nameless, gullible intern keeps divulging information about our
+employees. Imagine if the sender first asked: "Is Bob there?" and
+received back the names Alice and Edward. Our sender could then email
+again: "Is Edwarda there?", and will get back Edward and Susan. (No,
+"Edwarda" is not a real name. However, it is the first name
+alphabetically after "Edward" and that is enough to get the intern to reply
+with a message telling us the next valid name after Edward.) Repeat the
+process enough times and the person sending the emails eventually
+learns every name in our company phone directory. For many of you, this
+may not be a problem, since the very idea of DNS is similar to a public
+phone book: if you don't want a name to be known publicly, don't put it
+in DNS! Consider using DNS views (split DNS) and only display your
+sensitive names to a select audience.
+
+The second potential drawback of NSEC is a bigger zone file and memory consumption;
+there is no opt-out mechanism for insecure child zones, so each name
+in the zone will get an additional NSEC record and a RRSIG record to go with
+it. In practice this is a problem only for parent-zone operators dealing with
+mostly insecure child zones, such as ``com.``. To learn more about opt-out,
+please see :ref:`advanced_discussions_nsec3_optout`.
+
+.. _advanced_discussions_nsec3:
+.. _nsec3:
+
+NSEC3
+^^^^^
+
+NSEC3 adds two additional features that NSEC does not have:
+
+1. It offers no easy zone enumeration.
+
+2. It provides a mechanism for the parent zone to exclude insecure
+ delegations (i.e., delegations to zones that are not signed) from the
+ proof of non-existence.
+
+Recall that in :ref:`advanced_discussions_nsec` we provided a range of
+names to prove that something does not exist. But as it turns
+out, even disclosing these ranges of names becomes a problem: this made
+it very easy for the curious-minded to look at our entire zone. Not
+only that, unlike a zone transfer, this "zone walking" is more
+resource-intensive. So how do we disclose something without actually disclosing
+it?
+
+The answer is actually quite simple: hashing functions, or one-way
+hashes. Without going into many details, think of it like a magical meat
+grinder. A juicy piece of ribeye steak goes in one end, and out comes a
+predictable shape and size of ground meat (hash) with a somewhat unique
+pattern. No matter how hard you try, you cannot turn the ground meat
+back into the ribeye steak: that's what we call a one-way hash.
+
+NSEC3 basically runs the names through a one-way hash before giving them
+out, so the recipients can verify the non-existence without any
+knowledge of the other names in the zone.
+
+So let's tell our little story for the third time, this
+time with NSEC3. In this version, our intern is not given a list of actual
+names; he is given a list of "hashed" names. So instead of Alice,
+Edward, and Susan, the list he is given reads like this (hashes
+shortened for easier reading):
+
+::
+
+ FSK5.... (produced from Edward)
+ JKMA.... (produced from Susan)
+ NTQ0.... (produced from Alice)
+
+Then, an email is received for Bob again. Our intern takes the name Bob
+through a hash function, and the result is L8J2..., so he replies: "I'm
+sorry, that person doesn't work here. The name before that is JKMA...,
+and the name after that is NTQ0...". There, we proved Bob doesn't exist,
+without giving away any names! To put that into proper NSEC3 resource
+records, they would look like this (again, hashes shortened for
+ease of display):
+
+::
+
+ FSK5....example.com. 300 IN NSEC3 1 0 0 - JKMA... A RRSIG
+ JKMA....example.com. 300 IN NSEC3 1 0 0 - NTQ0... A RRSIG
+ NTQ0....example.com. 300 IN NSEC3 1 0 0 - FSK5... A RRSIG
+
+.. note::
+
+ Just because we employed one-way hash functions does not mean there is
+ no way for a determined individual to figure out our zone data.
+
+Most names published in the DNS are rarely secret or unpredictable. They are
+published to be memorable, used and consumed by humans. They are often recorded
+in many other network logs such as email logs, certificate transparency logs,
+web page links, intrusion detection systems, malware scanners, email archives,
+etc. Many times a simple dictionary of commonly used domain-name prefixes
+(www, mail, imap, login, database, etc.) can be used to quickly reveal a large
+number of labels within a zone. Additionally, if an adversary really wants to
+expend significant CPU resources to mount an offline dictionary attack on a
+zone's NSEC3 chain, they will likely be able to find most of the "guessable"
+names despite any level of hashing.
+
+Also, it is still possible to gather all of our NSEC3 records and hashed
+names and perform an offline brute-force attack by trying all
+possible combinations to figure out what the original name is. In our
+meat-grinder analogy, this would be like someone
+buying all available cuts of meat and grinding them up at home using
+the same model of meat grinder, and comparing the output with the meat
+you gave him. It is expensive and time-consuming (especially with
+real meat), but like everything else in cryptography, if someone has
+enough resources and time, nothing is truly private forever. If you
+are concerned about someone performing this type of attack on your
+zone data, use some of the special techniques described in :rfc:`4470`.
+
+.. _advanced_discussions_nsec3param:
+
+NSEC3PARAM
+++++++++++
+
+.. warning::
+ Before we dive into the details of NSEC3 parametrization, please note:
+ the defaults should not be changed without a strong justification and a full
+ understanding of the potential impact.
+
+The above NSEC3 examples used four parameters: 1, 0, 0, and
+zero-length salt. 1 represents the algorithm, 0 represents the opt-out
+flag, 0 represents the number of additional iterations, and - is the
+salt. Let's look at how each one can be configured:
+
+.. glossary::
+
+ Algorithm
+ NSEC3 Hashing Algorithm
+ The only currently defined value is 1 for SHA-1, so there
+ is no configuration field for it.
+
+ Opt-out
+ Setting this bit to 1 enables NSEC3 opt-out, which is
+ discussed in :ref:`advanced_discussions_nsec3_optout`.
+
+ Iterations
+ Iterations defines the number of _additional_ times to
+ apply the algorithm when generating an NSEC3 hash. More iterations
+ consume more resources for both authoritative servers and validating
+ resolvers. The considerations here are similar to those seen in
+ :ref:`key_sizes`, of security versus resources.
+
+ .. warning::
+ Do not use values higher than zero. A value of zero provides one round
+ of SHA-1 hashing and protects from non-determined attackers.
+
+ A greater number of additional iterations causes interoperability problems
+ and opens servers to CPU-exhausting DoS attacks, while providing
+ only doubtful security benefits.
+
+ Salt
+ A salt value, which can be combined with an FQDN to influence the
+ resulting hash. Salt is discussed in more detail in
+ :ref:`advanced_discussions_nsec3_salt`.
+
+.. _advanced_discussions_nsec3_optout:
+
+NSEC3 Opt-Out
++++++++++++++
+
+First things first: For most DNS administrators who do not manage a huge number
+of insecure delegations, the NSEC3 opt-out featuere is not relevant.
+
+Opt-out allows for blocks of unsigned delegations to be covered by a single NSEC3
+record. In other words, use of the opt-out allows large registries to only sign as
+many NSEC3 records as there are signed DS or other RRsets in the zone; with
+opt-out, unsigned delegations do not require additional NSEC3 records. This
+sacrifices the tamper-resistance proof of non-existence offered by NSEC3 in
+order to reduce memory and CPU overheads, and decreases the effectiveness of the cache
+(:rfc:`8198`).
+
+Why would that ever be desirable? If a significant number of delegations
+are not yet securely delegated, meaning they lack DS records and are still
+insecure or unsigned, generating DNSSEC records for all their NS records
+might consume lots of memory and is not strictly required by the child zones.
+
+This resource-saving typically makes a difference only for *huge* zones like ``com.``.
+Imagine that you are the operator of busy top-level domains such as ``com.``,
+with millions of insecure delegated domain names.
+As of mid-2022, around 3% of all ``com.`` zones are signed. Basically,
+without opt-out, with 1,000,000 delegations, only 30,000 of which are secure, you
+still have to generate NSEC RRsets for the other 970,000 delegations; with
+NSEC3 opt-out, you will have saved yourself 970,000 sets of records.
+
+In contrast, for a small zone the difference is operationally negligible
+and the drawbacks outweigh the benefits.
+
+If NSEC3 opt-out is truly essential for a zone, the following
+configuration can be added to :any:`dnssec-policy`; for example, to create an
+NSEC3 chain using the SHA-1 hash algorithm, with the opt-out flag,
+no additional iterations, and no extra salt, use:
+
+.. code-block:: none
+
+ dnssec-policy "nsec3" {
+ ...
+ nsec3param iterations 0 optout yes salt-length 0;
+ };
+
+
+
+To learn more about how to configure NSEC3 opt-out, please see
+:ref:`recipes_nsec3_optout`.
+
+.. _advanced_discussions_nsec3_salt:
+
+NSEC3 Salt
+++++++++++
+
+.. warning::
+ Contrary to popular belief, adding salt provides little value.
+ Each DNS zone is always uniquely salted using the zone name. **Operators should
+ use a zero-length salt value.**
+
+The properties of this extra salt are complicated and beyond scope of this
+document. For detailed description why the salt in the context of DNSSEC
+provides little value please see `IETF draft ietf-dnsop-nsec3-guidance version
+10 section 2.4
+<https://datatracker.ietf.org/doc/html/draft-ietf-dnsop-nsec3-guidance-10#section-2.4>`__.
+
+.. _advanced_discussions_nsec_or_nsec3:
+
+NSEC or NSEC3?
+^^^^^^^^^^^^^^
+
+So which is better: NSEC or NSEC3? There is no single right
+answer here that fits everyone; it comes down to a given network's needs or
+requirements.
+
+In most cases, NSEC is a good choice for zone administrators. It
+relieves the authoritative servers and resolver of the additional cryptographic
+operations that NSEC3 requires, and NSEC is comparatively easier to
+troubleshoot than NSEC3.
+
+NSEC3 comes with many drawbacks and should be implemented only if zone
+enumeration prevention is really needed, or when opt-out provides a
+significant reduction in memory and CPU overheads (in other words, with a
+huge zone with mostly insecure delegations).
+
+.. _advanced_discussions_key_generation:
+
+DNSSEC Keys
+~~~~~~~~~~~
+
+Types of Keys
+^^^^^^^^^^^^^
+
+Although DNSSEC
+documentation talks about three types of keys, they are all the same
+thing - but they have different roles. The roles are:
+
+Zone-Signing Key (ZSK)
+ This is the key used to sign the zone. It signs all records in the
+ zone apart from the DNSSEC key-related RRsets: DNSKEY, CDS, and
+ CDNSKEY.
+
+Key-Signing Key (KSK)
+ This is the key used to sign the DNSSEC key-related RRsets and is the
+ key used to link the parent and child zones. The parent zone stores a
+ digest of the KSK. When a resolver verifies the chain of trust it
+ checks to see that the DS record in the parent (which holds the
+ digest of a key) matches a key in the DNSKEY RRset, and that it is
+ able to use that key to verify the DNSKEY RRset. If it can do
+ that, the resolver knows that it can trust the DNSKEY resource
+ records, and so can use one of them to validate the other records in
+ the zone.
+
+Combined Signing Key (CSK)
+ A CSK combines the functionality of a ZSK and a KSK. Instead of
+ having one key for signing the zone and one for linking the parent
+ and child zones, a CSK is a single key that serves both roles.
+
+It is important to realize the terms ZSK, KSK, and CSK describe how the
+keys are used - all these keys are represented by DNSKEY records. The
+following examples are the DNSKEY records from a zone signed with a KSK
+and ZSK:
+
+::
+
+ $ dig @192.168.1.12 example.com DNSKEY
+
+ ; <<>> DiG 9.16.0 <<>> @192.168.1.12 example.com dnskey +multiline
+ ; (1 server found)
+ ;; global options: +cmd
+ ;; Got answer:
+ ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 54989
+ ;; flags: qr aa rd; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 1
+ ;; WARNING: recursion requested but not available
+
+ ;; OPT PSEUDOSECTION:
+ ; EDNS: version: 0, flags:; udp: 4096
+ ; COOKIE: 5258d7ed09db0d76010000005ea1cc8c672d8db27a464e37 (good)
+ ;; QUESTION SECTION:
+ ;example.com. IN DNSKEY
+
+ ;; ANSWER SECTION:
+ example.com. 60 IN DNSKEY 256 3 13 (
+ tAeXLtIQ3aVDqqS/1UVRt9AE6/nzfoAuaT1Vy4dYl2CK
+ pLNcUJxME1Z//pnGXY+HqDU7Gr5HkJY8V0W3r5fzlw==
+ ) ; ZSK; alg = ECDSAP256SHA256 ; key id = 63722
+ example.com. 60 IN DNSKEY 257 3 13 (
+ cxkNegsgubBPXSra5ug2P8rWy63B8jTnS4n0IYSsD9eW
+ VhiyQDmdgevKUhfG3SE1wbLChjJc2FAbvSZ1qk03Nw==
+ ) ; KSK; alg = ECDSAP256SHA256 ; key id = 42933
+
+... and a zone signed with just a CSK:
+
+::
+
+ $ dig @192.168.1.13 example.com DNSKEY
+
+ ; <<>> DiG 9.16.0 <<>> @192.168.1.13 example.com dnskey +multiline
+ ; (1 server found)
+ ;; global options: +cmd
+ ;; Got answer:
+ ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 22628
+ ;; flags: qr aa rd; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1
+ ;; WARNING: recursion requested but not available
+
+ ;; OPT PSEUDOSECTION:
+ ; EDNS: version: 0, flags:; udp: 4096
+ ; COOKIE: bf19ee914b5df46e010000005ea1cd02b66c06885d274647 (good)
+ ;; QUESTION SECTION:
+ ;example.com. IN DNSKEY
+
+ ;; ANSWER SECTION:
+ example.com. 60 IN DNSKEY 257 3 13 (
+ p0XM6AJ68qid2vtOdyGaeH1jnrdk2GhZeVvGzXfP/PNa
+ 71wGtzR6jdUrTbXo5Z1W5QeeJF4dls4lh4z7DByF5Q==
+ ) ; KSK; alg = ECDSAP256SHA256 ; key id = 1231
+
+The only visible difference between the records (apart from the key data
+itself) is the value of the flags fields; this is 256
+for a ZSK and 257 for a KSK or CSK. Even then, the flags field is only a
+hint to the software using it as to the role of the key: zones can be
+signed by any key. The fact that a CSK and KSK both have the same flags
+emphasizes this. A KSK usually only signs the DNSSEC key-related RRsets
+in a zone, whereas a CSK is used to sign all records in the zone.
+
+The original idea of separating the function of the key into a KSK and
+ZSK was operational. With a single key, changing it for any reason is
+"expensive," as it requires interaction with the parent zone
+(e.g., uploading the key to the parent may require manual interaction
+with the organization running that zone). By splitting it, interaction
+with the parent is required only if the KSK is changed; the ZSK can be
+changed as often as required without involving the parent.
+
+The split also allows the keys to be of different lengths. So the ZSK,
+which is used to sign the record in the zone, can be of a (relatively)
+short length, lowering the load on the server. The KSK, which is used
+only infrequently, can be of a much longer length. The relatively
+infrequent use also allows the private part of the key to be stored in a
+way that is more secure but that may require more overhead to access, e.g., on
+an HSM (see :ref:`hardware_security_modules`).
+
+In the early days of DNSSEC, the idea of splitting the key went more or
+less unchallenged. However, with the advent of more powerful computers
+and the introduction of signaling methods between the parent and child
+zones (see :ref:`cds_cdnskey`), the advantages of a ZSK/KSK split are
+less clear and, for many zones, a single key is all that is required.
+
+As with many questions related to the choice of DNSSEC policy, the
+decision on which is "best" is not clear and depends on your circumstances.
+
+Which Algorithm?
+^^^^^^^^^^^^^^^^
+
+There are three algorithm choices for DNSSEC as of this writing
+(mid-2020):
+
+- RSA
+
+- Elliptic Curve DSA (ECDSA)
+
+- Edwards Curve Digital Security Algorithm (EdDSA)
+
+All are supported in BIND 9, but only RSA and ECDSA (specifically
+RSASHA256 and ECDSAP256SHA256) are mandatory to implement in DNSSEC.
+However, RSA is a little long in the tooth, and ECDSA/EdDSA are emerging
+as the next new cryptographic standards. In fact, the US federal
+government recommended discontinuing RSA use altogether by September 2015
+and migrating to using ECDSA or similar algorithms.
+
+For now, use ECDSAP256SHA256 but keep abreast of developments in this
+area. For details about rolling over DNSKEYs to a new algorithm, see
+:ref:`advanced_discussions_DNSKEY_algorithm_rollovers`.
+
+.. _key_sizes:
+
+Key Sizes
+^^^^^^^^^
+
+If using RSA keys, the choice of key sizes is a classic issue of finding
+the balance between performance and security. The larger the key size,
+the longer it takes for an attacker to crack the key; but larger keys
+also mean more resources are needed both when generating signatures
+(authoritative servers) and verifying signatures (recursive servers).
+
+Of the two sets of keys, ZSK is used much more frequently. ZSK is used whenever zone
+data changes or when signatures expire, so performance
+certainly is of a bigger concern. As for KSK, it is used less
+frequently, so performance is less of a factor, but its impact is bigger
+because of its role in signing other keys.
+
+In earlier versions of this guide, the following key lengths were
+chosen for each set, with the recommendation that they be rotated more
+frequently for better security:
+
+- *ZSK*: RSA 1024 bits, rollover every year
+
+- *KSK*: RSA 2048 bits, rollover every five years
+
+These should be considered minimum RSA key sizes. At the time
+of this writing (mid-2020), the root zone and many TLDs are already using 2048
+bit ZSKs. If you choose to implement larger key sizes, keep in mind that
+larger key sizes result in larger DNS responses, which this may mean more
+load on network resources. Depending on your network configuration, end users
+may even experience resolution failures due to the increased response
+sizes, as discussed in :ref:`whats_edns0_all_about`.
+
+ECDSA key sizes can be much smaller for the same level of security, e.g.,
+an ECDSA key length of 224 bits provides the same level of security as a
+2048-bit RSA key. Currently BIND 9 sets a key size of 256 for all ECDSA keys.
+
+.. _advanced_discussions_key_storage:
+
+Key Storage
+^^^^^^^^^^^
+
+Public Key Storage
+++++++++++++++++++
+
+The beauty of a public key cryptography system is that the public key
+portion can and should be distributed to as many people as possible. As
+the administrator, you may want to keep the public keys on an easily
+accessible file system for operational ease, but there is no need to
+securely store them, since both ZSK and KSK public keys are published in
+the zone data as DNSKEY resource records.
+
+Additionally, a hash of the KSK public key is also uploaded to the
+parent zone (see :ref:`working_with_parent_zone` for more details),
+and is published by the parent zone as DS records.
+
+Private Key Storage
++++++++++++++++++++
+
+Ideally, private keys should be stored offline, in secure devices such
+as a smart card. Operationally, however, this creates certain
+challenges, since the private key is needed to create RRSIG resource
+records, and it is a hassle to bring the private key out of
+storage every time the zone file changes or signatures expire.
+
+A common approach to strike the balance between security and
+practicality is to have two sets of keys: a ZSK set and a KSK set. A ZSK
+private key is used to sign zone data, and can be kept online for ease
+of use, while a KSK private key is used to sign just the DNSKEY (the ZSK); it is
+used less frequently, and can be stored in a much more secure and
+restricted fashion.
+
+For example, a KSK private key stored on a USB flash drive that is kept
+in a fireproof safe, only brought online once a year to sign a new pair
+of ZSKs, combined with a ZSK private key stored on the network
+file system and available for routine use, may be a good balance between
+operational flexibility and security.
+
+For more information on changing keys, please see
+:ref:`key_rollovers`.
+
+.. _hardware_security_modules:
+
+Hardware Security Modules (HSMs)
+++++++++++++++++++++++++++++++++
+
+A Hardware Security Module (HSM) may come in different shapes and sizes,
+but as the name indicates, it is a physical device or devices, usually
+with some or all of the following features:
+
+- Tamper-resistant key storage
+
+- Strong random-number generation
+
+- Hardware for faster cryptographic operations
+
+Most organizations do not incorporate HSMs into their security practices
+due to cost and the added operational complexity.
+
+BIND supports Public Key Cryptography Standard #11 (PKCS #11) for
+communication with HSMs and other cryptographic support devices. For
+more information on how to configure BIND to work with an HSM, please
+refer to the `BIND 9 Administrator Reference
+Manual <https://bind9.readthedocs.io/en/latest/index.html>`_.
+
+.. _advanced_discussions_key_management:
+
+Rollovers
+~~~~~~~~~
+
+.. _key_rollovers:
+
+Key Rollovers
+^^^^^^^^^^^^^
+
+A key rollover is where one key in a zone is replaced by a new one.
+There are arguments for and against regularly rolling keys. In essence
+these are:
+
+Pros:
+
+1. Regularly changing the key hinders attempts at determination of the
+ private part of the key by cryptanalysis of signatures.
+
+2. It gives administrators practice at changing a key; should a key ever need to be
+ changed in an emergency, they would not be doing it for the first time.
+
+Cons:
+
+1. A lot of effort is required to hack a key, and there are probably
+ easier ways of obtaining it, e.g., by breaking into the systems on
+ which it is stored.
+
+2. Rolling the key adds complexity to the system and introduces the
+ possibility of error. We are more likely to
+ have an interruption to our service than if we had not rolled it.
+
+Whether and when to roll the key is up to you. How serious would the
+damage be if a key were compromised without you knowing about it? How
+serious would a key roll failure be?
+
+Before going any further, it is worth noting that if you sign your zone
+with either of the fully automatic methods (described in ref:`signing_alternative_ways`),
+you don't really need to
+concern yourself with the details of a key rollover: BIND 9 takes care of
+it all for you. If you are doing a manual key roll or are setting up the
+keys for a semi-automatic key rollover, you do need to familiarize yourself
+with the various steps involved and the timing details.
+
+Rolling a key is not as simple as replacing the DNSKEY statement in the
+zone. That is an essential part of it, but timing is everything. For
+example, suppose that we run the ``example.com`` zone and that a friend
+queries for the AAAA record of ``www.example.com``. As part of the
+resolution process (described in
+:ref:`how_does_dnssec_change_dns_lookup`), their recursive server
+looks up the keys for the ``example.com`` zone and uses them to verify
+the signature associated with the AAAA record. We'll assume that the
+records validated successfully, so they can use the
+address to visit ``example.com``'s website.
+
+Let's also assume that immediately after the lookup, we want to roll the ZSK
+for ``example.com``. Our first attempt at this is to remove the old
+DNSKEY record and signatures, add a new DNSKEY record, and re-sign the
+zone with it. So one minute our server is serving the old DNSKEY and
+records signed with the old key, and the next minute it is serving the
+new key and records signed with it. We've achieved our goal - we are
+serving a zone signed with the new keys; to check this is really the
+case, we booted up our laptop and looked up the AAAA record
+``ftp.example.com``. The lookup succeeded so all must be well. Or is it?
+Just to be sure, we called our friend and asked them to check. They
+tried to lookup ``ftp.example.com`` but got a SERVFAIL response from
+their recursive server. What's going on?
+
+The answer, in a word, is "caching." When our friend looked up
+``www.example.com``, their recursive server retrieved and cached
+not only the AAAA record, but also a lot of other records. It cached
+the NS records for ``com`` and ``example.com``, as well as
+the AAAA (and A) records for those name servers (and this action may, in turn, have
+caused the lookup and caching of other NS and AAAA/A records). Most
+importantly for this example, it also looked up and cached the DNSKEY
+records for the root, ``com``, and ``example.com`` zones. When a query
+was made for ``ftp.example.com``, the recursive server believed it
+already had most of the information
+we needed. It knew what nameservers served ``example.com`` and their
+addresses, so it went directly to one of those to get the AAAA record for
+``ftp.example.com`` and its associated signature. But when it tried to
+validate the signature, it used the cached copy of the DNSKEY, and that
+is when our friend had the problem. Their recursive server had a copy of
+the old DNSKEY in its cache, but the AAAA record for ``ftp.example.com``
+was signed with the new key. So, not surprisingly, the signature could not
+validate.
+
+How should we roll the keys for ``example.com``? A clue to the
+answer is to note that the problem came about because the DNSKEY records
+were cached by the recursive server. What would have happened had our
+friend flushed the DNSKEY records from the recursive server's cache before
+making the query? That would have worked; those records would have been
+retrieved from ``example.com``'s nameservers at the same time that we
+retrieved the AAAA record for ``ftp.example.com``. Our friend's server would have
+obtained the new key along with the AAAA record and associated signature
+created with the new key, and all would have been well.
+
+As it is obviously impossible for us to notify all recursive server
+operators to flush our DNSKEY records every time we roll a key, we must
+use another solution. That solution is to wait
+for the recursive servers to remove old records from caches when they
+reach their TTL. How exactly we do this depends on whether we are trying
+to roll a ZSK, a KSK, or a CSK.
+
+.. _zsk_rollover_methods:
+
+ZSK Rollover Methods
+++++++++++++++++++++
+
+The ZSK can be rolled in one of the following two ways:
+
+1. *Pre-Publication*: Publish the new ZSK into zone data before it is
+ actually used. Wait at least one TTL interval, so the world's recursive servers
+ know about both keys, then stop using the old key and generate a new
+ RRSIG using the new key. Wait at least another TTL, so the cached old
+ key data is expunged from the world's recursive servers, and then remove
+ the old key.
+
+ The benefit of the pre-publication approach is it does not
+ dramatically increase the zone size; however, the duration of the rollover
+ is longer. If insufficient time has passed after the new ZSK is
+ published, some resolvers may only have the old ZSK cached when the
+ new RRSIG records are published, and validation may fail. This is the
+ method described in :ref:`recipes_zsk_rollover`.
+
+2. *Double-Signature*: Publish the new ZSK and new RRSIG, essentially
+ doubling the size of the zone. Wait at least one TTL interval, and then remove
+ the old ZSK and old RRSIG.
+
+ The benefit of the double-signature approach is that it is easier to
+ understand and execute, but it causes a significantly increased zone size
+ during a rollover event.
+
+.. _ksk_rollover_methods:
+
+KSK Rollover Methods
+++++++++++++++++++++
+
+Rolling the KSK requires interaction with the parent zone, so
+operationally this may be more complex than rolling ZSKs. There are
+three methods of rolling the KSK:
+
+1. *Double-KSK*: Add the new KSK to the DNSKEY RRset, which is then
+ signed with both the old and new keys. After waiting for the old RRset
+ to expire from caches, change the DS record in the parent zone.
+ After waiting a further TTL interval for this change to be reflected in
+ caches, remove the old key from the RRset.
+
+ Basically, the new KSK is added first at the child zone and
+ used to sign the DNSKEY; then the DS record is changed, followed by the
+ removal of the old KSK. Double-KSK keeps the interaction with the
+ parent zone to a minimum, but for the duration of the rollover, the
+ size of the DNSKEY RRset is increased.
+
+2. *Double-DS*: Publish the new DS record. After waiting for this
+ change to propagate into caches, change the KSK. After a further TTL
+ interval during which the old DNSKEY RRset expires from caches, remove the
+ old DS record.
+
+ Double-DS is the reverse of Double-KSK: the new DS is published at
+ the parent first, then the KSK at the child is updated, then
+ the old DS at the parent is removed. The benefit is that the size of the DNSKEY
+ RRset is kept to a minimum, but interactions with the parent zone are
+ increased to two events. This is the method described in
+ :ref:`recipes_ksk_rollover`.
+
+3. *Double-RRset*: Add the new KSK to the DNSKEY RRset, which is
+ then signed with both the old and new key, and add the new DS record
+ to the parent zone. After waiting a suitable interval for the
+ old DS and DNSKEY RRsets to expire from caches, remove the old DNSKEY and
+ old DS record.
+
+ Double-RRset is the fastest way to roll the KSK (i.e., it has the shortest rollover
+ time), but has the drawbacks of both of the other methods: a larger
+ DNSKEY RRset and two interactions with the parent.
+
+.. _csk_rollover_methods:
+
+CSK Rollover Methods
+++++++++++++++++++++
+
+Rolling the CSK is more complex than rolling either the ZSK or KSK, as
+the timing constraints relating to both the parent zone and the caching
+of records by downstream recursive servers must be taken into
+account. There are numerous possible methods that are a combination of ZSK
+rollover and KSK rollover methods. BIND 9 automatic signing uses a
+combination of ZSK Pre-Publication and Double-KSK rollover.
+
+.. _advanced_discussions_emergency_rollovers:
+
+Emergency Key Rollovers
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Keys are generally rolled on a regular schedule - if you choose
+to roll them at all. But sometimes, you may have to rollover keys
+out-of-schedule due to a security incident. The aim of an emergency
+rollover is to re-sign the zone with a new key as soon as possible, because
+when a key is suspected of being compromised, a malicious attacker (or
+anyone who has access to the key) could impersonate your server and trick other
+validating resolvers into believing that they are receiving authentic,
+validated answers.
+
+During an emergency rollover, follow the same operational
+procedures described in :ref:`recipes_rollovers`, with the added
+task of reducing the TTL of the current active (potentially compromised) DNSKEY
+RRset, in an attempt to phase out the compromised key faster before the new
+key takes effect. The time frame should be significantly reduced from
+the 30-days-apart example, since you probably do not want to wait up to
+60 days for the compromised key to be removed from your zone.
+
+Another method is to carry a spare key with you at all times. If
+you have a second key pre-published and that one
+is not compromised at the same time as the first key,
+you could save yourself some time by immediately
+activating the spare key if the active
+key is compromised. With pre-publication, all validating resolvers should already
+have this spare key cached, thus saving you some time.
+
+With a KSK emergency rollover, you also need to consider factors
+related to your parent zone, such as how quickly they can remove the old
+DS records and publish the new ones.
+
+As with many other facets of DNSSEC, there are multiple aspects to take into
+account when it comes to emergency key rollovers. For more in-depth
+considerations, please check out :rfc:`7583`.
+
+.. _advanced_discussions_DNSKEY_algorithm_rollovers:
+
+Algorithm Rollovers
+^^^^^^^^^^^^^^^^^^^
+
+From time to time, new digital signature algorithms with improved
+security are introduced, and it may be desirable for administrators to
+roll over DNSKEYs to a new algorithm, e.g., from RSASHA1 (algorithm 5 or
+7) to RSASHA256 (algorithm 8). The algorithm rollover steps must be followed with
+care to avoid breaking DNSSEC validation.
+
+If you are managing DNSSEC by using the :any:`dnssec-policy` configuration,
+:iscman:`named` handles the rollover for you. Simply change the algorithm
+for the relevant keys, and :iscman:`named` uses the new algorithm when the
+key is next rolled. It performs a smooth transition to the new
+algorithm, ensuring that the zone remains valid throughout rollover.
+
+If you are using other methods to sign the zone, the administrator needs to do more work. As
+with other key rollovers, when the zone is a primary zone, an algorithm
+rollover can be accomplished using dynamic updates or automatic key
+rollovers. For secondary zones, only automatic key rollovers are
+possible, but the :iscman:`dnssec-settime` utility can be used to control the
+timing.
+
+In any case, the first step is to put DNSKEYs in place using the new algorithm.
+You must generate the ``K*`` files for the new algorithm and put
+them in the zone's key directory, where :iscman:`named` can access them. Take
+care to set appropriate ownership and permissions on the keys. If the
+:any:`auto-dnssec` zone option is set to ``maintain``, :iscman:`named`
+automatically signs the zone with the new keys, based on their timing
+metadata when the :any:`dnssec-loadkeys-interval` elapses or when you issue the
+:option:`rndc loadkeys` command. Otherwise, for primary zones, you can use
+:iscman:`nsupdate` to add the new DNSKEYs to the zone; this causes :iscman:`named`
+to use them to sign the zone. For secondary zones, e.g., on a
+"bump in the wire" signing server, :iscman:`nsupdate` cannot be used.
+
+Once the zone has been signed by the new DNSKEYs (and you have waited
+for at least one TTL period), you must inform the parent zone and any trust
+anchor repositories of the new KSKs, e.g., you might place DS records in
+the parent zone through your DNS registrar's website.
+
+Before starting to remove the old algorithm from a zone, you must allow
+the maximum TTL on its DS records in the parent zone to expire. This
+assures that any subsequent queries retrieve the new DS records
+for the new algorithm. After the TTL has expired, you can remove the DS
+records for the old algorithm from the parent zone and any trust anchor
+repositories. You must then allow another maximum TTL interval to elapse
+so that the old DS records disappear from all resolver caches.
+
+The next step is to remove the DNSKEYs using the old algorithm from your
+zone. Again this can be accomplished using :iscman:`nsupdate` to delete the
+old DNSKEYs (for primary zones only) or by automatic key rollover when
+:any:`auto-dnssec` is set to ``maintain``. You can cause the automatic key
+rollover to take place immediately by using the :iscman:`dnssec-settime`
+utility to set the *Delete* date on all keys to any time in the past.
+(See the :option:`dnssec-settime -D date/offset <dnssec-settime -D>` option.)
+
+After adjusting the timing metadata, the :option:`rndc loadkeys` command
+causes :iscman:`named` to remove the DNSKEYs and
+RRSIGs for the old algorithm from the zone. Note also that with the
+:iscman:`nsupdate` method, removing the DNSKEYs also causes :iscman:`named` to
+remove the associated RRSIGs automatically.
+
+Once you have verified that the old DNSKEYs and RRSIGs have been removed
+from the zone, the final (optional) step is to remove the key files for
+the old algorithm from the key directory.
+
+Other Topics
+~~~~~~~~~~~~
+
+DNSSEC and Dynamic Updates
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Dynamic DNS (DDNS) is actually independent of DNSSEC. DDNS provides a
+mechanism, separate from editing the zone file or zone database, to edit DNS
+data. Most DNS clients and servers are able to handle dynamic
+updates, and DDNS can also be integrated as part of your DHCP
+environment.
+
+When you have both DNSSEC and dynamic updates in your environment,
+updating zone data works the same way as with traditional (insecure)
+DNS: you can use :option:`rndc freeze` before editing the zone file, and
+:option:`rndc thaw` when you have finished editing, or you can use the
+command :iscman:`nsupdate` to add, edit, or remove records like this:
+
+::
+
+ $ nsupdate
+ > server 192.168.1.13
+ > update add xyz.example.com. 300 IN A 1.1.1.1
+ > send
+ > quit
+
+The examples provided in this guide make :iscman:`named` automatically
+re-sign the zone whenever its content has changed. If you decide to sign
+your own zone file manually, you need to remember to execute the
+:iscman:`dnssec-signzone` command whenever your zone file has been updated.
+
+As far as system resources and performance are concerned, be mindful that
+with a DNSSEC zone that changes frequently, every time the zone
+changes your system is executing a series of cryptographic operations
+to (re)generate signatures and NSEC or NSEC3 records.
+
+.. _dnssec_on_private_networks:
+
+DNSSEC on Private Networks
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Let's clarify what we mean: in this section, "private networks" really refers to
+a private or internal DNS view. Most DNS products offer the ability to
+have different versions of DNS answers, depending on the origin of the
+query. This feature is often called "DNS views" or "split DNS," and is most
+commonly implemented as an "internal" versus an "external" setup.
+
+For instance, your organization may have a version of ``example.com``
+that is offered to the world, and its names most likely resolve to
+publicly reachable IP addresses. You may also have an internal version
+of ``example.com`` that is only accessible when you are on the company's
+private networks or via a VPN connection. These private networks typically
+fall under 10.0.0.0/8, 172.16.0.0/12, or 192.168.0.0/16 for IPv4.
+
+So what if you want to offer DNSSEC for your internal version of
+``example.com``? This can be done: the golden rule is to use the same
+key for both the internal and external versions of the zones. This
+avoids problems that can occur when machines (e.g., laptops) move
+between accessing the internal and external zones, when it is possible
+that they may have cached records from the wrong zone.
+
+.. _introduction_to_dane:
+
+Introduction to DANE
+^^^^^^^^^^^^^^^^^^^^
+
+With your DNS infrastructure secured with DNSSEC, information can
+now be stored in DNS and its integrity and authenticity can be proved.
+One of the new features that takes advantage of this is the DNS-Based
+Authentication of Named Entities, or DANE. This improves security in a
+number of ways, including:
+
+- The ability to store self-signed X.509 certificates and bypass having to pay a third
+ party (such as a Certificate Authority) to sign the certificates
+ (:rfc:`6698`).
+
+- Improved security for clients connecting to mail servers (:rfc:`7672`).
+
+- A secure way of getting public PGP keys (:rfc:`7929`).
+
+Disadvantages of DNSSEC
+~~~~~~~~~~~~~~~~~~~~~~~
+
+DNSSEC, like many things in this world, is not without its problems.
+Below are a few challenges and disadvantages that DNSSEC faces.
+
+1. *Increased, well, everything*: With DNSSEC, signed zones are larger,
+ thus taking up more disk space; for DNSSEC-aware servers, the
+ additional cryptographic computation usually results in increased
+ system load; and the network packets are bigger, possibly putting
+ more strains on the network infrastructure.
+
+2. *Different security considerations*: DNSSEC addresses many security
+ concerns, most notably cache poisoning. But at the same time, it may
+ introduce a set of different security considerations, such as
+ amplification attack and zone enumeration through NSEC. These
+ concerns are still being identified and addressed by the Internet
+ community.
+
+3. *More complexity*: If you have read this far, you have probably already
+ concluded this yourself. With additional resource records, keys,
+ signatures, and rotations, DNSSEC adds many more moving pieces on top of
+ the existing DNS machine. The job of the DNS administrator changes,
+ as DNS becomes the new secure repository of everything from spam
+ avoidance to encryption keys, and the amount of work involved to
+ troubleshoot a DNS-related issue becomes more challenging.
+
+4. *Increased fragility*: The increased complexity means more
+ opportunities for things to go wrong. Before DNSSEC, DNS
+ was essentially "add something to the zone and forget it." With DNSSEC,
+ each new component - re-signing, key rollover, interaction with
+ parent zone, key management - adds more opportunity for error. It is
+ entirely possible that a failure to validate a name may come down to
+ errors on the part of one or more zone operators rather than the
+ result of a deliberate attack on the DNS.
+
+5. *New maintenance tasks*: Even if your new secure DNS infrastructure
+ runs without any hiccups or security breaches, it still requires
+ regular attention, from re-signing to key rollovers. While most of
+ these can be automated, some of the tasks, such as KSK rollover,
+ remain manual for the time being.
+
+6. *Not enough people are using it today*: While it's estimated (as of
+ mid-2020) that roughly 30% of the global Internet DNS traffic is
+ validating [#]_ , that doesn't mean that many of the DNS zones are
+ actually signed. What this means is, even if your company's zone is
+ signed today, fewer than 30% of the Internet's servers are taking
+ advantage of this extra security. It gets worse: with less than 1.5%
+ of the ``com.`` domains signed, even if your DNSSEC validation is enabled today,
+ it's not likely to buy you or your users a whole lot more protection
+ until these popular domain names decide to sign their zones.
+
+The last point may have more impact than you realize. Consider this:
+HTTP and HTTPS make up the majority of traffic on the Internet. While you may have
+secured your DNS infrastructure through DNSSEC, if your web hosting is
+outsourced to a third party that does not yet support DNSSEC in its
+own domain, or if your web page loads contents and components from
+insecure domains, end users may experience validation problems when
+trying to access your web page. For example, although you may have signed
+the zone ``company.com``, the web address ``www.company.com`` may actually be a
+CNAME to ``foo.random-cloud-provider.com``. As long as
+``random-cloud-provider.com`` remains an insecure DNS zone, users cannot
+fully validate everything when they visit your web page and could be
+redirected elsewhere by a cache poisoning attack.
+
+.. [#]
+ Based on APNIC statistics at
+ `<https://stats.labs.apnic.net/dnssec/XA>`__
diff --git a/doc/dnssec-guide/commonly-asked-questions.rst b/doc/dnssec-guide/commonly-asked-questions.rst
new file mode 100644
index 0000000..3f8c834
--- /dev/null
+++ b/doc/dnssec-guide/commonly-asked-questions.rst
@@ -0,0 +1,172 @@
+.. Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+..
+.. SPDX-License-Identifier: MPL-2.0
+..
+.. This Source Code Form is subject to the terms of the Mozilla Public
+.. License, v. 2.0. If a copy of the MPL was not distributed with this
+.. file, you can obtain one at https://mozilla.org/MPL/2.0/.
+..
+.. See the COPYRIGHT file distributed with this work for additional
+.. information regarding copyright ownership.
+
+.. _dnssec_commonly_asked_questions:
+
+Commonly Asked Questions
+------------------------
+
+Below are some common questions and (hopefully) some answers that
+help.
+
+Do I need IPv6 to have DNSSEC?
+ No. DNSSEC can be deployed without IPv6.
+
+Does DNSSEC encrypt my DNS traffic, so others cannot eavesdrop on my DNS queries?
+ No. Although cryptographic keys and digital signatures
+ are used in DNSSEC, they only provide authenticity and integrity, not
+ privacy. Someone who sniffs network traffic can still see all the DNS
+ queries and answers in plain text; DNSSEC just makes it very difficult
+ for the eavesdropper to alter or spoof the DNS responses.
+ For protection against eavesdropping, the preferred protocol is DNS-over-TLS.
+ DNS-over-HTTPS can also do the job, but it is more complex.
+
+If I deploy DNS-over-TLS/HTTPS, can I skip deploying DNSSEC?
+ No. DNS-over-encrypted-transport stops eavesdroppers on a network, but it does
+ not protect against cache poisoning and answer manipulation in other parts
+ of the DNS resolution chain. In other words, these technologies offer protection
+ only for records when they are in transit between two machines; any
+ compromised server can still redirect traffic elsewhere (or simply eavesdrop).
+ However, DNSSEC provides integrity and authenticity for DNS
+ *records*, even when these records are stored in caches and on disks.
+
+Does DNSSEC protect the communication between my laptop and my name server?
+ Unfortunately, not at the moment. DNSSEC is designed to protect the
+ communication between end clients (laptop) and name servers;
+ however, there are few applications or stub resolver libraries as of
+ mid-2020 that take advantage of this capability.
+
+Does DNSSEC secure zone transfers?
+ No. You should consider using TSIG to secure zone transfers among your
+ name servers.
+
+Does DNSSEC protect my network from malicious websites?
+ DNSSEC makes it much more difficult for attackers to spoof DNS responses
+ or perform cache poisoning. It cannot protect against users who
+ visit a malicious website that an attacker owns and operates, or prevent users from
+ mistyping a domain name; it will just become less likely that an attacker can
+ hijack other domain names.
+
+ In other words, DNSSEC is designed to provide confidence that when
+ a DNS response is received for www.company.com over port 53, it really came from
+ Company's name servers and the answers are authentic. But that does not mean
+ the web server a user visits over port 80 or port 443 is necessarily safe.
+
+If I enable DNSSEC validation, will it break DNS lookup, since most domain names do not yet use DNSSEC?
+ No, DNSSEC is backwards-compatible to "standard" DNS. A DNSSEC-enabled
+ validating resolver can still look up all of these domain names as it always
+ has under standard DNS.
+
+ There are four (4) categories of responses (see :rfc:`4035`):
+
+ .. glossary::
+
+ Secure
+ Domains that have DNSSEC deployed correctly.
+
+ Insecure
+ Domains that have yet to deploy DNSSEC.
+
+ Bogus
+ Domains that have deployed DNSSEC but have done it incorrectly.
+
+ Indeterminate
+ Domains for which it is not possible to determine whether these domains use DNSSEC.
+
+ A DNSSEC-enabled validating resolver still resolves :term:`Secure` and
+ :term:`Insecure`; only :term:`Bogus` and :term:`Indeterminate` result in a
+ SERVFAIL.
+ As of mid-2022, roughly one-third of users worldwide are using DNSSEC validation
+ on their recursive name servers. Google public DNS (8.8.8.8) also has
+ enabled DNSSEC validation.
+
+Do I need to have special client software to use DNSSEC?
+ No. DNSSEC only changes the communication
+ behavior among DNS servers, not between a DNS server (validating resolver) and
+ a client (stub resolver). With DNSSEC validation enabled on your recursive
+ server, if a domain name does not pass the checks, an error message
+ (typically SERVFAIL) is returned to clients; to most client
+ software today, it appears that the DNS query has failed or that the domain
+ name does not exist.
+
+Since DNSSEC uses public key cryptography, do I need Public Key Infrastructure (PKI) in order to use DNSSEC?
+ No, DNSSEC does not depend on an existing PKI. Public keys are stored within
+ the DNS hierarchy; the trustworthiness of each zone is guaranteed by
+ its parent zone, all the way back to the root zone. A copy of the trust
+ anchor for the root zone is distributed with BIND 9.
+
+Do I need to purchase SSL certificates from a Certificate Authority (CA) to use DNSSEC?
+ No. With DNSSEC, you generate and publish your own keys, and sign your own
+ data as well. There is no need to pay someone else to do it for you.
+
+My parent zone does not support DNSSEC; can I still sign my zone?
+ Technically, yes, but you will not get
+ the full benefit of DNSSEC, as other validating resolvers are not
+ able to validate your zone data. Without the DS record(s) in your parent
+ zone, other validating resolvers treat your zone as an insecure
+ (traditional) zone, and no actual verification is carried out.
+ To the rest of the world, your zone still appears to be
+ insecure, and it will continue to be insecure until your parent zone can
+ host the DS record(s) for you and tell the rest of the world
+ that your zone is signed.
+
+Is DNSSEC the same thing as TSIG?
+ No. TSIG is typically used
+ between primary and secondary name servers to secure zone transfers,
+ while DNSSEC secures DNS lookup by validating answers. Even if you enable
+ DNSSEC, zone transfers are still not validated; to
+ secure the communication between your primary and secondary name
+ servers, consider setting up TSIG or similar secure channels.
+
+How are keys copied from primary to secondary server(s)?
+ DNSSEC uses public cryptography, which results in two types of keys: public and
+ private. The public keys are part of the zone data, stored as DNSKEY
+ record types. Thus the public keys are synchronized from primary to
+ secondary server(s) as part of the zone transfer. The private keys are
+ not, and should not be, stored anywhere other than secured on the primary server.
+ See :ref:`advanced_discussions_key_storage` for
+ more information on key storage options and considerations.
+
+Can I use the same key for multiple zones?
+ Yes and no. Good security practice
+ suggests that you should use unique key pairs for each zone, just as
+ you should have different passwords for your email account, social
+ media login, and online banking credentials. On a technical level, it
+ is completely feasible to reuse a key, but multiple zones are at risk if one key
+ pair is compromised. However, if you have hundreds or thousands
+ of zones to administer, a single key pair for all might be
+ less error-prone to manage. You may choose to use the same approach as
+ with password management: use unique passwords for your bank accounts and
+ shopping sites, but use a standard password for your not-very-important
+ logins. First, categorize your zones: high-value zones (or zones that have
+ specific key rollover requirements) get their own key pairs, while other,
+ more "generic" zones can use a single key pair for easier management. Note that
+ at present (mid-2020), fully automatic signing (using the :any:`dnssec-policy`
+ clause in your :iscman:`named` configuration file) does not support reuse of keys
+ except when the same zone appears in multiple views (see next question).
+ To use the same key for multiple zones, sign your
+ zones using semi-automatic signing. Each zone wishing to use the key
+ should point to the same key directory.
+
+How do I sign the different instances of a zone that appears in multiple views?
+ Add a :any:`dnssec-policy` statement to each :any:`zone` definition in the
+ configuration file. To avoid problems when a single computer accesses
+ different instances of the zone while information is still in its cache
+ (e.g., a laptop moving from your office to a customer site), you
+ should sign all instances with the same key. This means setting the
+ same DNSSEC policy for all instances of the zone, and making sure that the
+ key directory is the same for all instances of the zone.
+
+Will there be any problems if I change the DNSSEC policy for a zone?
+ If you are using fully automatic signing, no. Just change the parameters in the
+ :any:`dnssec-policy` statement and reload the configuration file. :iscman:`named`
+ makes a smooth transition to the new policy, ensuring that your zone
+ remains valid at all times.
diff --git a/doc/dnssec-guide/getting-started.rst b/doc/dnssec-guide/getting-started.rst
new file mode 100644
index 0000000..ff3ae2c
--- /dev/null
+++ b/doc/dnssec-guide/getting-started.rst
@@ -0,0 +1,147 @@
+.. Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+..
+.. SPDX-License-Identifier: MPL-2.0
+..
+.. This Source Code Form is subject to the terms of the Mozilla Public
+.. License, v. 2.0. If a copy of the MPL was not distributed with this
+.. file, you can obtain one at https://mozilla.org/MPL/2.0/.
+..
+.. See the COPYRIGHT file distributed with this work for additional
+.. information regarding copyright ownership.
+
+.. _getting_started:
+
+Getting Started
+---------------
+
+.. _software_requirements:
+
+Software Requirements
+~~~~~~~~~~~~~~~~~~~~~
+
+This guide assumes BIND 9.18.0 or newer, although the more elaborate manual
+procedures do work with all versions of BIND later than 9.9.
+
+We recommend running the latest stable version to get the most
+complete DNSSEC configuration, as well as the latest security fixes.
+
+.. _hardware_requirements:
+
+Hardware Requirements
+~~~~~~~~~~~~~~~~~~~~~
+
+.. _recursive_server_hardware:
+
+Recursive Server Hardware
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Enabling DNSSEC validation on a recursive server makes it a *validating
+resolver*. The job of a validating resolver is to fetch additional
+information that can be used to computationally verify the answer set.
+Contrary to popular belief, the increase in resource consumption is very modest:
+
+1. *CPU*: a validating resolver executes cryptographic functions on cache-miss
+ answers, which leads to increased CPU usage. Thanks to standard DNS caching
+ and contemporary CPUs, the increase in CPU-time consumption in a steady
+ state is negligible - typically on the order of 5%. For a brief period (a few
+ minutes) after the resolver starts, the increase might be as much as 20%, but it
+ quickly decreases as the DNS cache fills in.
+
+2. *System memory*: DNSSEC leads to larger answer sets and occupies
+ more memory space. With typical ISP traffic and the state of the Internet as
+ of mid-2022, memory consumption for the cache increases by roughly 20%.
+
+3. *Network interfaces*: although DNSSEC does increase the amount of DNS
+ traffic overall, in practice this increase is often within measurement
+ error.
+
+.. _authoritative_server_hardware:
+
+Authoritative Server Hardware
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+On the authoritative server side, DNSSEC is enabled on a zone-by-zone
+basis. When a zone is DNSSEC-enabled, it is also known as "signed."
+Below are the expected changes to resource consumption caused by serving
+DNSSEC-signed zones:
+
+1. *CPU*: a DNSSEC-signed zone requires periodic re-signing, which is a
+ cryptographic function that is CPU-intensive. If your DNS zone is
+ dynamic or changes frequently, that also adds to higher CPU loads.
+
+2. *System storage*: A signed zone is definitely larger than an unsigned
+ zone. How much larger? See
+ :ref:`your_zone_before_and_after_dnssec` for a comparison
+ example. The final size depends on the structure of the zone, the signing algorithm,
+ the number of keys, the choice of NSEC or NSEC3, the ratio of signed delegations, the zone file
+ format, etc. Usually, the size of a signed zone ranges from a negligible
+ increase to as much as three times the size of the unsigned zone.
+
+3. *System memory*: Larger DNS zone files take up not only more storage
+ space on the file system, but also more space when they are loaded
+ into system memory. The final memory consumption also depends on all the
+ variables listed above: in the typical case the increase is around half of
+ the unsigned zone memory consumption, but it can be as high as three times
+ for some corner cases.
+
+4. *Network interfaces*: While your authoritative name servers will
+ begin sending back larger responses, it is unlikely that you need to
+ upgrade your network interface card (NIC) on the name server unless
+ you have some truly outdated hardware.
+
+One factor to consider, but over which you really have no control, is
+the number of users who query your domain name who themselves have DNSSEC
+enabled. As of mid-2022, measurements by `APNIC
+<https://stats.labs.apnic.net/dnssec>`__ show 41% of Internet users send
+DNSSEC-aware queries. This means that more DNS queries for your domain will
+take advantage of the additional security features, which will result in
+increased system load and possibly network traffic.
+
+.. _network_requirements:
+
+Network Requirements
+~~~~~~~~~~~~~~~~~~~~
+
+From a network perspective, DNS and DNSSEC packets are very similar;
+DNSSEC packets are just bigger, which means DNS is more likely to use
+TCP. You should test for the following two items to make sure your
+network is ready for DNSSEC:
+
+1. *DNS over TCP*: Verify network connectivity over TCP port 53, which
+ may mean updating firewall policies or Access Control Lists (ACL) on
+ routers. See :ref:`dns_uses_tcp` for more details.
+
+2. *Large UDP packets*: Some network equipment, such as firewalls, may
+ make assumptions about the size of DNS UDP packets and incorrectly
+ reject DNS traffic that appears "too big." Verify that the
+ responses your name server generates are being seen by the rest of the
+ world: see :ref:`whats_edns0_all_about` for more details.
+
+.. _operational_requirements:
+
+Operational Requirements
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. _parent_zone:
+
+Parent Zone
+^^^^^^^^^^^
+
+Before starting your DNSSEC deployment, check with your parent zone
+administrators to make sure they support DNSSEC. This may or may not be
+the same entity as your registrar. As you will see later in
+:ref:`working_with_parent_zone`, a crucial step in DNSSEC deployment
+is establishing the parent-child trust relationship. If your parent zone
+does not yet support DNSSEC, contact that administrator to voice your concerns.
+
+.. _security_requirements:
+
+Security Requirements
+^^^^^^^^^^^^^^^^^^^^^
+
+Some organizations may be subject to stricter security requirements than
+others. Check to see if your organization requires stronger
+cryptographic keys be generated and stored, and how often keys need to be
+rotated. The examples presented in this document are not intended for
+high-value zones. We cover some of these security considerations in
+:ref:`dnssec_advanced_discussions`.
diff --git a/doc/dnssec-guide/img/add-ds-1.png b/doc/dnssec-guide/img/add-ds-1.png
new file mode 100644
index 0000000..ac28899
--- /dev/null
+++ b/doc/dnssec-guide/img/add-ds-1.png
Binary files differ
diff --git a/doc/dnssec-guide/img/add-ds-2.png b/doc/dnssec-guide/img/add-ds-2.png
new file mode 100644
index 0000000..c4b1acf
--- /dev/null
+++ b/doc/dnssec-guide/img/add-ds-2.png
Binary files differ
diff --git a/doc/dnssec-guide/img/add-ds-3.png b/doc/dnssec-guide/img/add-ds-3.png
new file mode 100644
index 0000000..41a2858
--- /dev/null
+++ b/doc/dnssec-guide/img/add-ds-3.png
Binary files differ
diff --git a/doc/dnssec-guide/img/add-ds-4.png b/doc/dnssec-guide/img/add-ds-4.png
new file mode 100644
index 0000000..d760e5d
--- /dev/null
+++ b/doc/dnssec-guide/img/add-ds-4.png
Binary files differ
diff --git a/doc/dnssec-guide/img/add-ds-5.png b/doc/dnssec-guide/img/add-ds-5.png
new file mode 100644
index 0000000..904448d
--- /dev/null
+++ b/doc/dnssec-guide/img/add-ds-5.png
Binary files differ
diff --git a/doc/dnssec-guide/img/add-ds-6.png b/doc/dnssec-guide/img/add-ds-6.png
new file mode 100644
index 0000000..0a0046e
--- /dev/null
+++ b/doc/dnssec-guide/img/add-ds-6.png
Binary files differ
diff --git a/doc/dnssec-guide/img/dnssec-12-steps.png b/doc/dnssec-guide/img/dnssec-12-steps.png
new file mode 100644
index 0000000..e8ca53b
--- /dev/null
+++ b/doc/dnssec-guide/img/dnssec-12-steps.png
Binary files differ
diff --git a/doc/dnssec-guide/img/dnssec-8-steps.png b/doc/dnssec-guide/img/dnssec-8-steps.png
new file mode 100644
index 0000000..20c4c8b
--- /dev/null
+++ b/doc/dnssec-guide/img/dnssec-8-steps.png
Binary files differ
diff --git a/doc/dnssec-guide/img/dnssec-inline-signing-1.png b/doc/dnssec-guide/img/dnssec-inline-signing-1.png
new file mode 100644
index 0000000..daf25fc
--- /dev/null
+++ b/doc/dnssec-guide/img/dnssec-inline-signing-1.png
Binary files differ
diff --git a/doc/dnssec-guide/img/dnssec-inline-signing-2.png b/doc/dnssec-guide/img/dnssec-inline-signing-2.png
new file mode 100644
index 0000000..bc23eb8
--- /dev/null
+++ b/doc/dnssec-guide/img/dnssec-inline-signing-2.png
Binary files differ
diff --git a/doc/dnssec-guide/img/dnsviz-example-small.png b/doc/dnssec-guide/img/dnsviz-example-small.png
new file mode 100644
index 0000000..c4e8abf
--- /dev/null
+++ b/doc/dnssec-guide/img/dnsviz-example-small.png
Binary files differ
diff --git a/doc/dnssec-guide/img/remove-ds-1.png b/doc/dnssec-guide/img/remove-ds-1.png
new file mode 100644
index 0000000..690f1a5
--- /dev/null
+++ b/doc/dnssec-guide/img/remove-ds-1.png
Binary files differ
diff --git a/doc/dnssec-guide/img/remove-ds-2.png b/doc/dnssec-guide/img/remove-ds-2.png
new file mode 100644
index 0000000..b2e173f
--- /dev/null
+++ b/doc/dnssec-guide/img/remove-ds-2.png
Binary files differ
diff --git a/doc/dnssec-guide/img/remove-ds-3.png b/doc/dnssec-guide/img/remove-ds-3.png
new file mode 100644
index 0000000..a51aba0
--- /dev/null
+++ b/doc/dnssec-guide/img/remove-ds-3.png
Binary files differ
diff --git a/doc/dnssec-guide/img/signature-generation.png b/doc/dnssec-guide/img/signature-generation.png
new file mode 100644
index 0000000..f473232
--- /dev/null
+++ b/doc/dnssec-guide/img/signature-generation.png
Binary files differ
diff --git a/doc/dnssec-guide/img/signature-verification.png b/doc/dnssec-guide/img/signature-verification.png
new file mode 100644
index 0000000..15f4a72
--- /dev/null
+++ b/doc/dnssec-guide/img/signature-verification.png
Binary files differ
diff --git a/doc/dnssec-guide/img/unsign-1.png b/doc/dnssec-guide/img/unsign-1.png
new file mode 100644
index 0000000..d4e3037
--- /dev/null
+++ b/doc/dnssec-guide/img/unsign-1.png
Binary files differ
diff --git a/doc/dnssec-guide/img/unsign-2.png b/doc/dnssec-guide/img/unsign-2.png
new file mode 100644
index 0000000..690f1a5
--- /dev/null
+++ b/doc/dnssec-guide/img/unsign-2.png
Binary files differ
diff --git a/doc/dnssec-guide/img/unsign-3.png b/doc/dnssec-guide/img/unsign-3.png
new file mode 100644
index 0000000..5aa6497
--- /dev/null
+++ b/doc/dnssec-guide/img/unsign-3.png
Binary files differ
diff --git a/doc/dnssec-guide/img/unsign-4.png b/doc/dnssec-guide/img/unsign-4.png
new file mode 100644
index 0000000..3fd398a
--- /dev/null
+++ b/doc/dnssec-guide/img/unsign-4.png
Binary files differ
diff --git a/doc/dnssec-guide/img/verisign-dnssec-debugger-example.png b/doc/dnssec-guide/img/verisign-dnssec-debugger-example.png
new file mode 100644
index 0000000..35a2d95
--- /dev/null
+++ b/doc/dnssec-guide/img/verisign-dnssec-debugger-example.png
Binary files differ
diff --git a/doc/dnssec-guide/introduction.rst b/doc/dnssec-guide/introduction.rst
new file mode 100644
index 0000000..7f13155
--- /dev/null
+++ b/doc/dnssec-guide/introduction.rst
@@ -0,0 +1,394 @@
+.. Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+..
+.. SPDX-License-Identifier: MPL-2.0
+..
+.. This Source Code Form is subject to the terms of the Mozilla Public
+.. License, v. 2.0. If a copy of the MPL was not distributed with this
+.. file, you can obtain one at https://mozilla.org/MPL/2.0/.
+..
+.. See the COPYRIGHT file distributed with this work for additional
+.. information regarding copyright ownership.
+
+.. _dnssec_guide_introduction:
+
+Introduction
+------------
+
+.. _who_should_read:
+
+Who Should Read this Guide?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This guide is intended as an introduction to DNSSEC for the DNS
+administrator who is already comfortable working with the existing BIND and DNS
+infrastructure. He or she might be curious about DNSSEC, but may not have had the
+time to investigate DNSSEC, to learn whether DNSSEC should
+be a part of his or her environment, and understand what it means to deploy it in the
+field.
+
+This guide provides basic information on how to configure DNSSEC using
+BIND 9.16.9 or later. Most of the information and examples in this guide also
+apply to versions of BIND later than 9.9.0, but some of the key features described here
+were only introduced in version 9.16.9. Readers are assumed to have basic
+working knowledge of the Domain Name System (DNS) and related network
+infrastructure, such as concepts of TCP/IP. In-depth knowledge of DNS and
+TCP/IP is not required. The guide assumes no prior knowledge of DNSSEC or
+related technology such as public key cryptography.
+
+.. _who_should_not_read:
+
+Who May Not Want to Read this Guide?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If you are already operating a DNSSEC-signed zone, you may not learn
+much from the first half of this document, and you may want to start with
+:ref:`dnssec_advanced_discussions`. If you want to
+learn about details of the protocol extension, such as data fields and flags,
+or the new record types, this document can help you get started but it
+does not include all the technical details.
+
+If you are experienced in DNSSEC, you
+may find some of the concepts in this document to be overly simplified for
+your taste, and some details are intentionally omitted at times for ease of
+illustration.
+
+If you administer a large or complex BIND environment, this
+guide may not provide enough information for you, as it is intended to provide
+only basic, generic working examples.
+
+If you are a top-level domain (TLD) operator, or
+administer zones under signed TLDs, this guide can
+help you get started, but it does not provide enough details to serve all of your
+needs.
+
+If your DNS environment uses DNS products other than (or in addition to)
+BIND, this document may provide some background or overlapping information, but you
+should check each product's vendor documentation for specifics.
+
+Finally, deploying
+DNSSEC on internal or private networks is not covered in this document, with the
+exception of a brief discussion in :ref:`dnssec_on_private_networks`.
+
+.. _what_is_dnssec:
+
+What is DNSSEC?
+~~~~~~~~~~~~~~~
+
+The Domain Name System (DNS) was designed in a day and age when the
+Internet was a friendly and trusting place. The protocol itself provides
+little protection against malicious or forged answers. DNS Security
+Extensions (DNSSEC) addresses this need, by adding digital signatures
+into DNS data so that each DNS response can be verified for integrity
+(the answer did not change during transit) and authenticity (the data
+came from the true source, not an impostor). In the ideal world, when
+DNSSEC is fully deployed, every single DNS answer can be validated and
+trusted.
+
+DNSSEC does not provide a secure tunnel; it does not encrypt or hide DNS
+data. It operates independently of an existing Public Key Infrastructure
+(PKI). It does not need SSL certificates or shared secrets. It was
+designed with backwards compatibility in mind, and can be deployed
+without impacting "old" unsecured domain names.
+
+DNSSEC is deployed on the three major components of the DNS
+infrastructure:
+
+- *Recursive Servers*: People use recursive servers to lookup external
+ domain names such as ``www.example.com``. Operators of recursive servers
+ need to enable DNSSEC validation. With validation enabled, recursive
+ servers carry out additional tasks on each DNS response they
+ receive to ensure its authenticity.
+
+- *Authoritative Servers*: People who publish DNS data on their name
+ servers need to sign that data. This entails creating additional
+ resource records, and publishing them to parent domains where
+ necessary. With DNSSEC enabled, authoritative servers respond to
+ queries with additional DNS data, such as digital signatures and
+ keys, in addition to the standard answers.
+
+- *Applications*: This component lives on every client machine, from web
+ servers to smart phones. This includes resolver libraries on different
+ operating systems, and applications such as web browsers.
+
+In this guide, we focus on the first two components, Recursive
+Servers and Authoritative Servers, and only lightly touch on the third
+component. We look at how DNSSEC works, how to configure a
+validating resolver, how to sign DNS zone data, and other operational
+tasks and considerations.
+
+.. _what_does_dnssec_add_to_dns:
+
+What Does DNSSEC Add to DNS?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. note::
+
+ Public Key Cryptography works on the concept of a pair of keys: one
+ made available to the world publicly, and one kept in secrecy
+ privately. Not surprisingly, they are known as a public key and a private
+ key. If you are not familiar with the concept, think of it as a
+ cleverly designed lock, where one key locks and one key unlocks. In
+ DNSSEC, we give out the unlocking public key to the rest of the
+ world, while keeping the locking key private. To learn how this is
+ used to secure DNS messages, see :ref:`how_are_answers_verified`.
+
+DNSSEC introduces eight new resource record types:
+
+- RRSIG (digital resource record signature)
+
+- DNSKEY (public key)
+
+- DS (parent-child)
+
+- NSEC (proof of nonexistence)
+
+- NSEC3 (proof of nonexistence)
+
+- NSEC3PARAM (proof of nonexistence)
+
+- CDS (child-parent signaling)
+
+- CDNSKEY (child-parent signaling)
+
+This guide does not go deep into the anatomy of each resource record
+type; the details are left for the reader to research and explore.
+Below is a short introduction on each of the new record types:
+
+- *RRSIG*: With DNSSEC enabled, just about every DNS answer (A, PTR,
+ MX, SOA, DNSKEY, etc.) comes with at least one resource
+ record signature, or RRSIG. These signatures are used by recursive name
+ servers, also known as validating resolvers, to verify the answers
+ received. To learn how digital signatures are generated and used, see
+ :ref:`how_are_answers_verified`.
+
+- *DNSKEY*: DNSSEC relies on public-key cryptography for data
+ authenticity and integrity. There are several keys used in DNSSEC,
+ some private, some public. The public keys are published to the world
+ as part of the zone data, and they are stored in the DNSKEY record
+ type.
+
+ In general, keys in DNSSEC are used for one or both of the following
+ roles: as a Zone Signing Key (ZSK), used to protect all zone data; or
+ as a Key Signing Key (KSK), used to protect the zone's keys. A key
+ that is used for both roles is referred to as a Combined Signing Key
+ (CSK). We talk about keys in more detail in
+ :ref:`advanced_discussions_key_generation`.
+
+- *DS*: One of the critical components of DNSSEC is that the parent
+ zone can "vouch" for its child zone. The DS record is verifiable
+ information (generated from one of the child's public keys) that a
+ parent zone publishes about its child as part of the chain of trust.
+ To learn more about the Chain of Trust, see
+ :ref:`chain_of_trust`.
+
+- *NSEC, NSEC3, NSEC3PARAM*: These resource records all deal with a
+ very interesting problem: proving that something does not exist. We
+ look at these record types in more detail in
+ :ref:`advanced_discussions_proof_of_nonexistence`.
+
+- *CDS, CDNSKEY*: The CDS and CDNSKEY resource records apply to
+ operational matters and are a way to signal to the parent zone that
+ the DS records it holds for the child zone should be updated. This is
+ covered in more detail in :ref:`cds_cdnskey`.
+
+.. _how_does_dnssec_change_dns_lookup:
+
+How Does DNSSEC Change DNS Lookup?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Traditional (insecure) DNS lookup is simple: a recursive name server
+receives a query from a client to lookup a name like ``www.isc.org``. The
+recursive name server tracks down the authoritative name server(s)
+responsible, sends the query to one of the authoritative name servers,
+and waits for it to respond with the answer.
+
+With DNSSEC validation enabled, a validating recursive name server
+(a.k.a. a *validating resolver*) asks for additional resource
+records in its query, hoping the remote authoritative name servers
+respond with more than just the answer to the query, but some proof to
+go along with the answer as well. If DNSSEC responses are received, the
+validating resolver performs cryptographic computation to verify the
+authenticity (the origin of the data) and integrity (that the data was not altered
+during transit) of the answers, and even asks the parent zone as part of
+the verification. It repeats this process of get-key, validate,
+ask-parent, and its parent, and its parent, all the way until
+the validating resolver reaches a key that it trusts. In the ideal,
+fully deployed world of DNSSEC, all validating resolvers only need to
+trust one key: the root key.
+
+.. _dnssec_12_steps:
+
+The 12-Step DNSSEC Validation Process (Simplified)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The following example shows the 12 steps of the DNSSEC validating process
+at a very high level, looking up the name ``www.isc.org`` :
+
+.. figure:: ../dnssec-guide/img/dnssec-12-steps.png
+ :alt: DNSSEC Validation 12 Steps
+
+1. Upon receiving a DNS query from a client to resolve ``www.isc.org``,
+ the validating resolver follows standard DNS protocol to track down
+ the name server for ``isc.org``, and sends it a DNS query to ask for the
+ A record of ``www.isc.org``. But since this is a DNSSEC-enabled
+ resolver, the outgoing query has a bit set indicating it wants
+ DNSSEC answers, hoping the name server that receives it is DNSSEC-enabled
+ and can honor this secure request.
+
+2. The ``isc.org`` name server is DNSSEC-enabled, so it responds with both
+ the answer (in this case, an A record) and a digital signature for
+ verification purposes.
+
+3. The validating resolver requires cryptographic keys to be able to verify the
+ digital signature, so it asks the ``isc.org`` name server for those keys.
+
+4. The ``isc.org`` name server responds with the cryptographic keys
+ (and digital signatures of the keys) used to generate the digital
+ signature that was sent in #2. At this point, the validating
+ resolver can use this information to verify the answers received in
+ #2.
+
+ Let's take a quick break here and look at what we've got so far...
+ how can our server trust this answer? If a clever attacker had taken over
+ the ``isc.org`` name server(s), of course she would send matching
+ keys and signatures. We need to ask someone else to have confidence
+ that we are really talking to the real ``isc.org`` name server. This
+ is a critical part of DNSSEC: at some point, the DNS administrators
+ at ``isc.org`` uploaded some cryptographic information to its
+ parent, ``.org``, maybe through a secure web form, maybe
+ through an email exchange, or perhaps in person. In
+ any event, at some point some verifiable information about the
+ child (``isc.org``) was sent to the parent (``.org``) for
+ safekeeping.
+
+5. The validating resolver asks the parent (``.org``) for the
+ verifiable information it keeps on its child, ``isc.org``.
+
+6. Verifiable information is sent from the ``.org`` server. At this
+ point, the validating resolver compares this to the answer it received
+ in #4; if the two of them match, it proves the authenticity of
+ ``isc.org``.
+
+ Let's examine this process. You might be thinking to yourself,
+ what if the clever attacker that took over ``isc.org`` also
+ compromised the ``.org`` servers? Of course all this information
+ would match! That's why we turn our attention now to the
+ ``.org`` server, interrogate it for its cryptographic keys, and
+ move one level up to ``.org``'s parent, root.
+
+7. The validating resolver asks the ``.org`` authoritative name server for
+ its cryptographic keys, to verify the answers received in #6.
+
+8. The ``.org`` name server responds with the answer (in this case,
+ keys and signatures). At this point, the validating resolver can
+ verify the answers received in #6.
+
+9. The validating resolver asks root (``.org``'s parent) for the verifiable
+ information it keeps on its child, ``.org``.
+
+10. The root name server sends back the verifiable information it keeps
+ on ``.org``. The validating resolver uses this information
+ to verify the answers received in #8.
+
+ So at this point, both ``isc.org`` and ``.org`` check out. But
+ what about root? What if this attacker is really clever and somehow
+ tricked us into thinking she's the root name server? Of course she
+ would send us all matching information! So we repeat the
+ interrogation process and ask for the keys from the root name
+ server.
+
+11. The validating resolver asks the root name server for its cryptographic
+ keys to verify the answer(s) received in #10.
+
+12. The root name server sends its keys; at this point, the validating
+ resolver can verify the answer(s) received in #10.
+
+.. _chain_of_trust:
+
+Chain of Trust
+~~~~~~~~~~~~~~
+
+But what about the root server itself? Who do we go to verify root's
+keys? There's no parent zone for root. In security, you have to trust
+someone, and in the perfectly protected world of DNSSEC (we talk later
+about the current imperfect state and ways to work around it),
+each validating resolver would only have to trust one entity, that is,
+the root name server. The validating resolver already has the root key
+on file (we discuss later how we got the root key file). So
+after the answer in #12 is received, the validating resolver compares it
+to the key it already has on file. Providing one of the keys in the
+answer matches the one on file, we can trust the answer from root. Thus
+we can trust ``.org``, and thus we can trust ``isc.org``. This is known
+as the "chain of trust" in DNSSEC.
+
+We revisit this 12-step process again later in
+:ref:`how_does_dnssec_change_dns_lookup_revisited` with more
+technical details.
+
+.. _why_is_dnssec_important:
+
+Why is DNSSEC Important? (Why Should I Care?)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+You might be thinking to yourself: all this DNSSEC stuff sounds
+wonderful, but why should I care? Below are some reasons why you may
+want to consider deploying DNSSEC:
+
+1. *Being a good netizen*: By enabling DNSSEC validation (as described in
+ :ref:`dnssec_validation`) on your DNS servers, you're protecting
+ your users and yourself a little more by checking answers returned to
+ you; by signing your zones (as described in
+ :ref:`dnssec_signing`), you are making it possible for other
+ people to verify your zone data. As more people adopt DNSSEC, the
+ Internet as a whole becomes more secure for everyone.
+
+2. *Compliance*: You may not even get a say in
+ implementing DNSSEC, if your organization is subject to compliance
+ standards that mandate it. For example, the US government set a
+ deadline in 2008 to have all ``.gov`` subdomains signed by
+ December 2009 [#]_. So if you operate a subdomain in ``.gov``, you
+ must implement DNSSEC to be compliant. ICANN also requires
+ that all new top-level domains support DNSSEC.
+
+3. *Enhanced Security*: Okay, so the big lofty goal of "let's be good"
+ doesn't appeal to you, and you don't have any compliance standards to
+ worry about. Here is a more practical reason why you should consider
+ DNSSEC: in the event of a DNS-based security breach, such as cache
+ poisoning or domain hijacking, after all the financial and brand
+ damage done to your domain name, you might be placed under scrutiny
+ for any preventive measure that could have been put in place. Think
+ of this like having your website only available via HTTP but not
+ HTTPS.
+
+4. *New Features*: DNSSEC brings not only enhanced security, but also
+ a whole new suite of features. Once DNS
+ can be trusted completely, it becomes possible to publish SSL
+ certificates in DNS, or PGP keys for fully automatic cross-platform
+ email encryption, or SSH fingerprints.... New features are still
+ being developed, but they all rely on a trustworthy DNS
+ infrastructure. To take a peek at these next-generation DNS features,
+ check out :ref:`introduction_to_dane`.
+
+.. [#]
+ The Office of Management and Budget (OMB) for the US government
+ published `a memo in
+ 2008 <https://www.whitehouse.gov/sites/whitehouse.gov/files/omb/memoranda/2008/m08-23.pdf>`__,
+ requesting all ``.gov`` subdomains to be DNSSEC-signed by December
+ 2009. This explains why ``.gov`` is the most-deployed DNSSEC domain
+ currently, with `around 90% of subdomains
+ signed. <https://fedv6-deployment.antd.nist.gov/cgi-bin/generate-gov>`__
+
+.. _how_does_dnssec_change_my_job:
+
+How Does DNSSEC Change My Job as a DNS Administrator?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+With this protocol extension, some of the things you were used to in DNS
+have changed. As the DNS administrator, you have new maintenance
+tasks to perform on a regular basis (as described in
+:ref:`signing_maintenance_tasks`); when there is a DNS resolution
+problem, you have new troubleshooting techniques and tools to use (as
+described in :ref:`dnssec_troubleshooting`). BIND 9 tries its best to
+make these things as transparent and seamless as possible. In this
+guide, we try to use configuration examples that result in the least
+amount of work for BIND 9 DNS administrators.
diff --git a/doc/dnssec-guide/preface.rst b/doc/dnssec-guide/preface.rst
new file mode 100644
index 0000000..fb6bd67
--- /dev/null
+++ b/doc/dnssec-guide/preface.rst
@@ -0,0 +1,83 @@
+.. Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+..
+.. SPDX-License-Identifier: MPL-2.0
+..
+.. This Source Code Form is subject to the terms of the Mozilla Public
+.. License, v. 2.0. If a copy of the MPL was not distributed with this
+.. file, you can obtain one at https://mozilla.org/MPL/2.0/.
+..
+.. See the COPYRIGHT file distributed with this work for additional
+.. information regarding copyright ownership.
+
+Preface
+-------
+
+.. _preface_organization:
+
+Organization
+~~~~~~~~~~~~
+
+This document provides introductory information on how DNSSEC works, how
+to configure BIND 9 to support some common DNSSEC features, and
+some basic troubleshooting tips. The chapters are organized as follows:
+
+:ref:`dnssec_guide_introduction` covers the intended audience for this
+document, assumed background knowledge, and a basic introduction to the
+topic of DNSSEC.
+
+:ref:`getting_started` covers various requirements
+before implementing DNSSEC, such as software versions, hardware
+capacity, network requirements, and security changes.
+
+:ref:`dnssec_validation` walks through setting up a validating
+resolver, and gives both more information on the validation process and
+some examples of tools to verify that the resolver is properly validating
+answers.
+
+:ref:`dnssec_signing` explains how to set up a basic signed
+authoritative zone, details the relationship between a child and a parent zone,
+and discusses ongoing maintenance tasks.
+
+:ref:`dnssec_troubleshooting` provides some tips on how to analyze
+and diagnose DNSSEC-related problems.
+
+:ref:`dnssec_advanced_discussions` covers several topics, including key
+generation, key storage, key management, NSEC and NSEC3, and some
+disadvantages of DNSSEC.
+
+:ref:`dnssec_recipes` provides several working examples of common DNSSEC
+solutions, with step-by-step details.
+
+:ref:`dnssec_commonly_asked_questions` lists some commonly asked
+questions and answers about DNSSEC.
+
+.. _preface_acknowledgement:
+
+Acknowledgements
+~~~~~~~~~~~~~~~~
+
+This document was originally authored by Josh Kuo of `DeepDive
+Networking <https://www.deepdivenetworking.com/>`__. He can be reached
+at josh.kuo@gmail.com.
+
+Thanks to the following individuals (in no particular order) who have
+helped in completing this document: Jeremy C. Reed, Heidi Schempf,
+Stephen Morris, Jeff Osborn, Vicky Risk, Jim Martin, Evan Hunt, Mark
+Andrews, Michael McNally, Kelli Blucher, Chuck Aurora, Francis Dupont,
+Rob Nagy, Ray Bellis, Matthijs Mekking, and Suzanne Goldlust.
+
+Special thanks goes to Cricket Liu and Matt Larson for their
+selflessness in knowledge sharing.
+
+Thanks to all the reviewers and contributors, including John Allen, Jim
+Young, Tony Finch, Timothe Litt, and Dr. Jeffry A. Spain.
+
+The sections on key rollover and key timing metadata borrowed heavily
+from the Internet Engineering Task Force draft titled "DNSSEC Key Timing
+Considerations" by S. Morris, J. Ihren, J. Dickinson, and W. Mekking,
+subsequently published as :rfc:`7583`.
+
+Icons made by `Freepik <https://www.freepik.com/>`__ and
+`SimpleIcon <https://www.simpleicon.com/>`__ from
+`Flaticon <https://www.flaticon.com/>`__, licensed under `Creative Commons BY
+3.0 <https://creativecommons.org/licenses/by/3.0/>`__.
diff --git a/doc/dnssec-guide/recipes.rst b/doc/dnssec-guide/recipes.rst
new file mode 100644
index 0000000..42ee782
--- /dev/null
+++ b/doc/dnssec-guide/recipes.rst
@@ -0,0 +1,1084 @@
+.. Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+..
+.. SPDX-License-Identifier: MPL-2.0
+..
+.. This Source Code Form is subject to the terms of the Mozilla Public
+.. License, v. 2.0. If a copy of the MPL was not distributed with this
+.. file, you can obtain one at https://mozilla.org/MPL/2.0/.
+..
+.. See the COPYRIGHT file distributed with this work for additional
+.. information regarding copyright ownership.
+
+.. _dnssec_recipes:
+
+Recipes
+-------
+
+This chapter provides step-by-step "recipes" for some common
+DNSSEC configurations.
+
+.. _recipes_inline_signing:
+
+DNSSEC Signing
+~~~~~~~~~~~~~~
+
+There are two recipes here: the first shows an example using DNSSEC
+signing on the primary server, which has been covered in this
+guide; the second shows how to setup a "bump in the
+wire" between a hidden primary and the secondary servers to seamlessly
+sign the zone "on the fly."
+
+.. _recipes_inline_signing_primary:
+
+Primary Server DNSSEC Signing
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In this recipe, our servers are illustrated as shown in
+:ref:`dnssec-signing-1`: we have a primary server
+(192.168.1.1) and three secondary servers (192.168.1.2, 192.168.1.3, and
+192.168.1.4) that receive zone transfers. To get the zone
+signed, we need to reconfigure the primary server. Once reconfigured, a
+signed version of the zone is generated on the fly;
+zone transfers take care of synchronizing the signed zone data
+to all secondary name servers, without configuration or software changes
+on them.
+
+.. _dnssec-signing-1:
+
+.. figure:: ../dnssec-guide/img/dnssec-inline-signing-1.png
+ :alt: DNSSEC Signing Recipe #1
+ :width: 80.0%
+
+ DNSSEC Signing Recipe #1
+
+Using the method described in
+:ref:`easy_start_guide_for_authoritative_servers`, we just need to
+add a :any:`dnssec-policy` statement to the relevant zone clause. This is
+what the :iscman:`named.conf` zone statement looks like on the primary server, 192.168.1.1:
+
+::
+
+ zone "example.com" IN {
+ type primary;
+ file "db/example.com.db";
+ key-directory "keys/example.com";
+ dnssec-policy default;
+ inline-signing yes;
+ allow-transfer { 192.168.1.2; 192.168.1.3; 192.168.1.4; };
+ };
+
+We have chosen to use the default policy, storing the keys generated for
+the zone in the directory ``keys/example.com``. To use a
+custom policy, define the policy in the configuration
+file and select it in the zone statement (as described in
+:ref:`signing_custom_policy`).
+
+On the secondary servers, :iscman:`named.conf` does not need to be updated,
+and it looks like this:
+
+::
+
+ zone "example.com" IN {
+ type secondary;
+ file "db/example.com.db";
+ primaries { 192.168.1.1; };
+ };
+
+In fact, the secondary servers do not even need to be running BIND; they
+can run any DNS product that supports DNSSEC.
+
+.. _recipes_inline_signing_bump_in_the_wire:
+
+"Bump in the Wire" Signing
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In this recipe, we take advantage of the power of automated signing
+by placing an additional name server (192.168.1.5) between the hidden
+primary (192.168.1.1) and the DNS secondaries (192.168.1.2, 192.168.1.3,
+and 192.168.1.4). The additional name server, 192.168.1.5, acts as a "bump
+in the wire," taking an unsigned zone from the hidden primary,
+and sending out signed data on the other end to the secondary name
+servers. The steps described in this recipe may be used as part of a
+DNSSEC deployment strategy, since it requires only minimal changes made to
+the existing hidden DNS primary and DNS secondaries.
+
+.. _dnssec-signing-2:
+
+.. figure:: ../dnssec-guide/img/dnssec-inline-signing-2.png
+ :alt: DNSSEC Signing Recipe #2
+ :width: 100.0%
+
+ DNSSEC Signing Recipe #2
+
+It is important to remember that 192.168.1.1 in this case is a hidden
+primary not exposed to the world, and it must not be listed in the NS RRset.
+Otherwise the world will get conflicting answers: unsigned answers from
+the hidden primary and signed answers from the other name servers.
+
+The only configuration change needed on the hidden primary, 192.168.1.1,
+is to make sure it allows our middle box to perform a zone transfer:
+
+::
+
+ zone "example.com" IN {
+ ...
+ allow-transfer { 192.168.1.5; };
+ ...
+ };
+
+On the middle box, 192.168.1.5, all the tasks described in
+:ref:`easy_start_guide_for_authoritative_servers` still need to be
+performed, such as generating key pairs and uploading information to
+the parent zone. This server is configured as secondary to the hidden
+primary 192.168.1.1 to receive the unsigned data; then, using keys
+accessible to this middle box, to sign data on the fly; and finally, to send out the
+signed data via zone transfer to the other three DNS secondaries. Its
+:iscman:`named.conf` zone statement looks like this:
+
+::
+
+ zone example.com {
+ type secondary;
+ primaries { 192.168.1.1; };
+ file "db/example.com.db";
+ key-directory "keys/example.com";
+ dnssec-policy default;
+ inline-signing yes;
+ allow-transfer { 192.168.1.2; 192.168.1.3; 192.168.1.4; };
+ };
+
+(As before, the default policy has been selected here. See
+:ref:`signing_custom_policy` for instructions on how to define
+and use a custom policy.)
+
+Finally, on the three secondary servers, the configuration should be updated
+to receive a zone transfer from 192.168.1.5 (the middle box) instead of
+from 192.168.1.1 (the hidden primary). If using BIND, the :iscman:`named.conf` file looks
+like this:
+
+::
+
+ zone "example.com" IN {
+ type secondary;
+ file "db/example.com.db";
+ primaries { 192.168.1.5; }; # this was 192.168.1.1 before!
+ };
+
+.. _recipes_rollovers:
+
+Rollovers
+~~~~~~~~~
+
+If you are signing your zone using a :any:`dnssec-policy` statement, this
+section is not really relevant to you. In the policy statement, you set how long
+you want your keys to be valid for, the time
+taken for information to propagate through your zone, the time it takes
+for your parent zone to register a new DS record, etc., and that's more
+or less it. :iscman:`named` implements everything for you automatically, apart from
+uploading the new DS records to your parent zone - which is covered in
+:ref:`signing_easy_start_upload_to_parent_zone`. (Some
+screenshots from a session where a KSK is uploaded to the parent zone
+are presented here for convenience.) However, these recipes may be useful
+in describing what happens
+through the rollover process and what you should be monitoring.
+
+.. _recipes_zsk_rollover:
+
+ZSK Rollover
+^^^^^^^^^^^^
+
+This recipe covers how to perform a ZSK rollover using what is known as
+the Pre-Publication method. For other ZSK rolling methods, please see
+:ref:`zsk_rollover_methods` in :ref:`dnssec_advanced_discussions`.
+
+Below is a sample timeline for a ZSK rollover to occur on January 1, 2021:
+
+1. December 1, 2020 (one month before rollover)
+
+ - Generate new ZSK
+
+ - Add DNSKEY for new ZSK to zone
+
+2. January 1, 2021 (day of rollover)
+
+ - New ZSK used to replace RRSIGs for the bulk of the zone
+
+3. February 1, 2021 (one month after rollover)
+
+ - Remove old ZSK DNSKEY RRset from zone
+
+ - DNSKEY signatures made with KSK are changed
+
+The current active ZSK has the ID 17694 in the example below. For more
+information on key management and rollovers, please see
+:ref:`advanced_discussions_key_management`.
+
+One Month Before ZSK Rollover
++++++++++++++++++++++++++++++
+
+On December 1, 2020, a month before the example rollover, you (as administrator)
+should change the parameters on the current key (17694). Set it to become inactive on
+January 1, 2021 and be deleted from the zone on February 1, 2021; also,
+generate a successor key (51623):
+
+::
+
+ # cd /etc/bind/keys/example.com/
+ # dnssec-settime -I 20210101 -D 20210201 Kexample.com.+008+17694
+ ./Kexample.com.+008+17694.key/GoDaddy
+
+ ./Kexample.com.+008+17694.private
+ # dnssec-keygen -S Kexample.com.+008+17694
+ Generating key pair..++++++ ...........++++++
+ Kexample.com.+008+51623
+
+The first command gets us into the key directory
+``/etc/bind/keys/example.com/``, where keys for ``example.com`` are
+stored.
+
+The second, :iscman:`dnssec-settime`, sets an inactive (:option:`-I <dnssec-settime -I>`) date of January 1,
+2021, and a deletion (:option:`-D <dnssec-settime -D>`) date of February 1, 2021, for the current ZSK
+(``Kexample.com.+008+17694``).
+
+The third command, :iscman:`dnssec-keygen`, creates a successor key, using
+the exact same parameters (algorithms, key sizes, etc.) as the current
+ZSK. The new ZSK created in our example is ``Kexample.com.+008+51623``.
+
+Make sure the successor keys are readable by :iscman:`named`.
+
+:iscman:`named`'s logging messages indicate when the next
+key checking event is scheduled to occur, the frequency of which can be
+controlled by :any:`dnssec-loadkeys-interval`. The log message looks like
+this:
+
+::
+
+ zone example.com/IN (signed): next key event: 01-Dec-2020 00:13:05.385
+
+And you can check the publish date of the key by looking at the key
+file:
+
+::
+
+ # cd /etc/bind/keys/example.com
+ # cat Kexample.com.+008+51623.key
+ ; This is a zone-signing key, keyid 11623, for example.com.
+ ; Created: 20201130160024 (Mon Dec 1 00:00:24 2020)
+ ; Publish: 20201202000000 (Fri Dec 2 08:00:00 2020)
+ ; Activate: 20210101000000 (Sun Jan 1 08:00:00 2021)
+ ...
+
+Since the publish date is set to the morning of December 2, and our example
+scenario takes place on December 1, the next
+morning you will notice that your zone has gained a new DNSKEY record,
+but the new ZSK is not yet being used to generate signatures. Below is
+the abbreviated output - with shortened DNSKEY and RRSIG - when querying the
+authoritative name server, 192.168.1.13:
+
+::
+
+ $ dig @192.168.1.13 example.com. DNSKEY +dnssec +multiline
+
+ ...
+ ;; ANSWER SECTION:
+ example.com. 600 IN DNSKEY 257 3 8 (
+ AwEAAcWDps...lM3NRn/G/R
+ ) ; KSK; alg = RSASHA256; key id = 6817
+ example.com. 600 IN DNSKEY 256 3 8 (
+ AwEAAbi6Vo...qBW5+iAqNz
+ ) ; ZSK; alg = RSASHA256; key id = 51623
+ example.com. 600 IN DNSKEY 256 3 8 (
+ AwEAAcjGaU...0rzuu55If5
+ ) ; ZSK; alg = RSASHA256; key id = 17694
+ example.com. 600 IN RRSIG DNSKEY 8 2 600 (
+ 20210101000000 20201201230000 6817 example.com.
+ LAiaJM26T7...FU9syh/TQ= )
+ example.com. 600 IN RRSIG DNSKEY 8 2 600 (
+ 20210101000000 20201201230000 17694 example.com.
+ HK4EBbbOpj...n5V6nvAkI= )
+ ...
+
+For good measure, let's take a look at the SOA record and its
+signature for this zone. Notice the RRSIG is signed by the current ZSK,
+17694. This will come in handy later when you want to verify whether
+the new ZSK is in effect:
+
+::
+
+ $ dig @192.168.1.13 example.com. SOA +dnssec +multiline
+
+ ...
+ ;; ANSWER SECTION:
+ example.com. 600 IN SOA ns1.example.com. admin.example.com. (
+ 2020120102 ; serial
+ 1800 ; refresh (30 minutes)
+ 900 ; retry (15 minutes)
+ 2419200 ; expire (4 weeks)
+ 300 ; minimum (5 minutes)
+ )
+ example.com. 600 IN RRSIG SOA 8 2 600 (
+ 20201230160109 20201130150109 17694 example.com.
+ YUTC8rFULaWbW+nAHzbfGwNqzARHevpryzRIJMvZBYPo
+ NAeejNk9saNAoCYKWxGJ0YBc2k+r5fYq1Mg4ll2JkBF5
+ buAsAYLw8vEOIxVpXwlArY+oSp9T1w2wfTZ0vhVIxaYX
+ 6dkcz4I3wbDx2xmG0yngtA6A8lAchERx2EGy0RM= )
+
+These are all the manual tasks you need to perform for a ZSK rollover.
+If you have followed the configuration examples in this guide of using
+:any:`inline-signing` and :any:`auto-dnssec`, everything else is automated for
+you by BIND.
+
+Day of ZSK Rollover
++++++++++++++++++++
+
+On the actual day of the rollover, although there is technically nothing
+for you to do, you should still keep an eye on the zone to make sure new
+signatures are being generated by the new ZSK (51623 in this example).
+The easiest way is to query the authoritative name server 192.168.1.13
+for the SOA record as you did a month ago:
+
+::
+
+ $ dig @192.168.1.13 example.com. SOA +dnssec +multiline
+
+ ...
+ ;; ANSWER SECTION:
+ example.com. 600 IN SOA ns1.example.com. admin.example.com. (
+ 2020112011 ; serial
+ 1800 ; refresh (30 minutes)
+ 900 ; retry (15 minutes)
+ 2419200 ; expire (4 weeks)
+ 300 ; minimum (5 minutes)
+ )
+ example.com. 600 IN RRSIG SOA 8 2 600 (
+ 20210131000000 20201231230000 51623 example.com.
+ J4RMNpJPOmMidElyBugJp0RLqXoNqfvo/2AT6yAAvx9X
+ zZRL1cuhkRcyCSLZ9Z+zZ2y4u2lvQGrNiondaKdQCor7
+ uTqH5WCPoqalOCBjqU7c7vlAM27O9RD11nzPNpVQ7xPs
+ y5nkGqf83OXTK26IfnjU1jqiUKSzg6QR7+XpLk0= )
+ ...
+
+As you can see, the signature generated by the old ZSK (17694) has
+disappeared, replaced by a new signature generated from the new ZSK
+(51623).
+
+.. note::
+
+ Not all signatures will disappear magically on the same day;
+ it depends on when each one was generated. In the worst-case scenario,
+ a new signature could have been signed by the old ZSK (17694) moments
+ before it was deactivated, meaning that the signature could live for almost
+ 30 more days, until just before February 1.
+
+ This is why it is important to keep the old ZSK in the
+ zone and not delete it right away.
+
+One Month After ZSK Rollover
+++++++++++++++++++++++++++++
+
+Again, technically there is nothing you need to do on this day,
+but it doesn't hurt to verify that the old ZSK (17694) is now completely
+gone from your zone. :iscman:`named` will not touch
+``Kexample.com.+008+17694.private`` and ``Kexample.com.+008+17694.key``
+on your file system. Running the same :iscman:`dig` command for DNSKEY should
+suffice:
+
+::
+
+ $ dig @192.168.1.13 example.com. DNSKEY +multiline +dnssec
+
+ ...
+ ;; ANSWER SECTION:
+ example.com. 600 IN DNSKEY 257 3 8 (
+ AwEAAcWDps...lM3NRn/G/R
+ ) ; KSK; alg = RSASHA256; key id = 6817
+ example.com. 600 IN DNSKEY 256 3 8 (
+ AwEAAdeCGr...1DnEfX+Xzn
+ ) ; ZSK; alg = RSASHA256; key id = 51623
+ example.com. 600 IN RRSIG DNSKEY 8 2 600 (
+ 20170203000000 20170102230000 6817 example.com.
+ KHY8P0zE21...Y3szrmjAM= )
+ example.com. 600 IN RRSIG DNSKEY 8 2 600 (
+ 20170203000000 20170102230000 51623 example.com.
+ G2g3crN17h...Oe4gw6gH8= )
+ ...
+
+Congratulations, the ZSK rollover is complete! As for the actual key
+files (the files ending in ``.key`` and ``.private``), they may be deleted at this
+point, but they do not have to be.
+
+.. _recipes_ksk_rollover:
+
+KSK Rollover
+^^^^^^^^^^^^
+
+This recipe describes how to perform KSK rollover using the Double-DS
+method. For other KSK rolling methods, please see
+:ref:`ksk_rollover_methods` in
+:ref:`dnssec_advanced_discussions`. The registrar used in this
+recipe is `GoDaddy <https://www.godaddy.com>`__. Also for this recipe,
+we are keeping the number of DS records down to just one per active set
+using just SHA-1, for the sake of better clarity, although in practice
+most zone operators choose to upload two DS records as shown in
+:ref:`working_with_parent_zone`. For more information on key
+management and rollovers,
+please see :ref:`advanced_discussions_key_management`.
+
+Below is a sample timeline for a KSK rollover to occur on January 1, 2021:
+
+1. December 1, 2020 (one month before rollover)
+
+ - Change timer on the current KSK
+
+ - Generate new KSK and DS records
+
+ - Add DNSKEY for the new KSK to zone
+
+ - Upload new DS records to parent zone
+
+2. January 1, 2021 (day of rollover)
+
+ - Use the new KSK to sign all DNSKEY RRsets, which generates new
+ RRSIGs
+
+ - Add new RRSIGs to the zone
+
+ - Remove RRSIG for the old ZSK from zone
+
+ - Start using the new KSK to sign DNSKEY
+
+3. February 1, 2021 (one month after rollover)
+
+ - Remove the old KSK DNSKEY from zone
+
+ - Remove old DS records from parent zone
+
+The current active KSK has the ID 24828, and this is the DS record that
+has already been published by the parent zone:
+
+::
+
+ # dnssec-dsfromkey -a SHA-1 Kexample.com.+007+24828.key
+ example.com. IN DS 24828 7 1 D4A33E8DD550A9567B4C4971A34AD6C4B80A6AD3
+
+.. _one_month_before_ksk_rollover:
+
+One Month Before KSK Rollover
++++++++++++++++++++++++++++++
+
+On December 1, 2020, a month before the planned rollover, you (as
+administrator) should
+change the parameters on the current key. Set it to become inactive on January
+1, 2021, and be deleted from the zone on February 1st, 2021;
+also generate a successor key (23550). Finally, generate a new
+DS record based on the new key, 23550:
+
+::
+
+ # cd /etc/bind/keys/example.com/
+ # dnssec-settime -I 20210101 -D 20210201 Kexample.com.+007+24828
+ ./Kexample.com.+007+24848.key
+ ./Kexample.com.+007+24848.private
+ # dnssec-keygen -S Kexample.com.+007+24848
+ Generating key pair.......................................................................................++ ...................................++
+ Kexample.com.+007+23550
+ # dnssec-dsfromkey -a SHA-1 Kexample.com.+007+23550.key
+ example.com. IN DS 23550 7 1 54FCF030AA1C79C0088FDEC1BD1C37DAA2E70DFB
+
+The first command gets us into the key directory
+``/etc/bind/keys/example.com/``, where keys for ``example.com`` are
+stored.
+
+The second, :iscman:`dnssec-settime`, sets an inactive (:option:`-I <dnssec-settime -I>`) date of January 1,
+2021, and a deletion (:option:`-D <dnssec-settime -D>`) date of February 1, 2021 for the current KSK
+(``Kexample.com.+007+24848``).
+
+The third command, :iscman:`dnssec-keygen`, creates a successor key, using
+the exact same parameters (algorithms, key sizes, etc.) as the current
+KSK. The new key pair created in our example is ``Kexample.com.+007+23550``.
+
+The fourth and final command, :iscman:`dnssec-dsfromkey`, creates a DS record
+from the new KSK (23550), using SHA-1 as the digest type. Again, in
+practice most people generate two DS records for both supported digest
+types (SHA-1 and SHA-256), but for our example here we are only using
+one to keep the output small and hopefully clearer.
+
+Make sure the successor keys are readable by :iscman:`named`.
+
+The :any:`syslog` message indicates when the next key
+checking event is. The log message looks like this:
+
+::
+
+ zone example.com/IN (signed): next key event: 01-Dec-2020 00:13:05.385
+
+You can check the publish date of the key by looking at the key
+file:
+
+::
+
+ # cd /etc/bind/keys/example.com
+ # cat Kexample.com.+007+23550.key
+ ; This is a key-signing key, keyid 23550, for example.com.
+ ; Created: 20201130160024 (Thu Dec 1 00:00:24 2020)
+ ; Publish: 20201202000000 (Fri Dec 2 08:00:00 2020)
+ ; Activate: 20210101000000 (Sun Jan 1 08:00:00 2021)
+ ...
+
+Since the publish date is set to the morning of December 2, and our example
+scenario takes place on December 1, the next
+morning you will notice that your zone has gained a new DNSKEY record
+based on your new KSK, but with no corresponding RRSIG yet. Below is the
+abbreviated output - with shortened DNSKEY and RRSIG - when querying the
+authoritative name server, 192.168.1.13:
+
+::
+
+ $ dig @192.168.1.13 example.com. DNSKEY +dnssec +multiline
+
+ ...
+ ;; ANSWER SECTION:
+ example.com. 300 IN DNSKEY 256 3 7 (
+ AwEAAdYqAc...TiSlrma6Ef
+ ) ; ZSK; alg = NSEC3RSASHA1; key id = 29747
+ example.com. 300 IN DNSKEY 257 3 7 (
+ AwEAAeTJ+w...O+Zy9j0m63
+ ) ; KSK; alg = NSEC3RSASHA1; key id = 24828
+ example.com. 300 IN DNSKEY 257 3 7 (
+ AwEAAc1BQN...Wdc0qoH21H
+ ) ; KSK; alg = NSEC3RSASHA1; key id = 23550
+ example.com. 300 IN RRSIG DNSKEY 7 2 300 (
+ 20201206125617 20201107115617 24828 example.com.
+ 4y1iPVJOrK...aC3iF9vgc= )
+ example.com. 300 IN RRSIG DNSKEY 7 2 300 (
+ 20201206125617 20201107115617 29747 example.com.
+ g/gfmPjr+y...rt/S/xjPo= )
+
+ ...
+
+Anytime after generating the DS record, you can upload it;
+it is not necessary to wait for the DNSKEY to be published in your zone,
+since this new KSK is not active yet. You can do it
+immediately after the new DS record has been generated on December 1,
+or you can wait until the next day after you have verified that the
+new DNSKEY record is added to the zone. Below are some screenshots from
+GoDaddy's web-based interface, used to add a new DS record [#]_.
+
+1. After logging in, click the green "Launch" button next to the domain
+ name you want to manage.
+
+ .. _add-ds-1:
+
+ .. figure:: ../dnssec-guide/img/add-ds-1.png
+ :alt: Upload DS Record Step #1
+ :width: 70.0%
+
+ Upload DS Record Step #1
+
+2. Scroll down to the "DS Records" section and click "Manage."
+
+ .. _add-ds-2:
+
+ .. figure:: ../dnssec-guide/img/add-ds-2.png
+ :alt: Upload DS Record Step #2
+ :width: 40.0%
+
+ Upload DS Record Step #2
+
+3. A dialog appears, displaying the current key (24828). Click "Add DS
+ Record."
+
+ .. _add-ds-3:
+
+ .. figure:: ../dnssec-guide/img/add-ds-3.png
+ :alt: Upload DS Record Step #3
+ :width: 80.0%
+
+ Upload DS Record Step #3
+
+4. Enter the Key ID, algorithm, digest type, and the digest, then click
+ "Next."
+
+ .. _add-ds-4:
+
+ .. figure:: ../dnssec-guide/img/add-ds-4.png
+ :alt: Upload DS Record Step #4
+ :width: 80.0%
+
+ Upload DS Record Step #4
+
+5. Address any errors and click "Finish."
+
+ .. _add-ds-5:
+
+ .. figure:: ../dnssec-guide/img/add-ds-5.png
+ :alt: Upload DS Record Step #5
+ :width: 80.0%
+
+ Upload DS Record Step #5
+
+6. Both DS records are shown. Click "Save."
+
+ .. _add-ds-6:
+
+ .. figure:: ../dnssec-guide/img/add-ds-6.png
+ :alt: Upload DS Record Step #6
+ :width: 80.0%
+
+ Upload DS Record Step #6
+
+Finally, let's verify that the registrar has published the new DS
+record. This may take anywhere from a few minutes to a few days,
+depending on your parent zone. You can verify whether your
+parent zone has published the new DS record by querying for the DS
+record of your zone. In the example below, the Google public DNS server
+8.8.8.8 is used:
+
+::
+
+ $ dig @8.8.8.8 example.com. DS
+
+ ...
+ ;; ANSWER SECTION:
+ example.com. 21552 IN DS 24828 7 1 D4A33E8DD550A9567B4C4971A34AD6C4B80A6AD3
+ example.com. 21552 IN DS 23550 7 1 54FCF030AA1C79C0088FDEC1BD1C37DAA2E70DFB
+
+You can also query your parent zone's authoritative name servers
+directly to see if these records have been published. DS records will
+not show up on your own authoritative zone, so you cannot query your own
+name servers for them. In this recipe, the parent zone is ``.com``, so
+querying a few of the ``.com`` name servers is another appropriate
+verification.
+
+Day of KSK Rollover
++++++++++++++++++++
+
+If you have followed the examples in this document, as described in
+:ref:`easy_start_guide_for_authoritative_servers`, there is
+technically nothing you need to do manually on the actual day of the
+rollover. However, you should still keep an eye on the zone to make sure
+new signature(s) are being generated by the new KSK (23550 in this
+example). The easiest way is to query the authoritative name server
+192.168.1.13 for the same DNSKEY and signatures, as you did a month
+ago:
+
+::
+
+ $ dig @192.168.1.13 example.com. DNSKEY +dnssec +multiline
+
+ ...
+ ;; ANSWER SECTION:
+ example.com. 300 IN DNSKEY 256 3 7 (
+ AwEAAdYqAc...TiSlrma6Ef
+ ) ; ZSK; alg = NSEC3RSASHA1; key id = 29747
+ example.com. 300 IN DNSKEY 257 3 7 (
+ AwEAAeTJ+w...O+Zy9j0m63
+ ) ; KSK; alg = NSEC3RSASHA1; key id = 24828
+ example.com. 300 IN DNSKEY 257 3 7 (
+ AwEAAc1BQN...Wdc0qoH21H
+ ) ; KSK; alg = NSEC3RSASHA1; key id = 23550
+ example.com. 300 IN RRSIG DNSKEY 7 2 300 (
+ 20210201074900 20210101064900 23550 mydnssecgood.org.
+ S6zTbBTfvU...Ib5eXkbtE= )
+ example.com. 300 IN RRSIG DNSKEY 7 2 300 (
+ 20210105074900 20201206064900 29747 mydnssecgood.org.
+ VY5URQA2/d...OVKr1+KX8= )
+ ...
+
+As you can see, the signature generated by the old KSK (24828) has
+disappeared, replaced by a new signature generated from the new KSK
+(23550).
+
+One Month After KSK Rollover
+++++++++++++++++++++++++++++
+
+While the removal of the old DNSKEY from the zone should be automated by
+:iscman:`named`, the removal of the DS record is manual. You should make sure
+the old DNSKEY record is gone from your zone first, by querying for the
+DNSKEY records of the zone; this time we expect not to see
+the key with an ID of 24828:
+
+::
+
+ $ dig @192.168.1.13 example.com. DNSKEY +dnssec +multiline
+
+ ...
+ ;; ANSWER SECTION:
+ example.com. 300 IN DNSKEY 256 3 7 (
+ AwEAAdYqAc...TiSlrma6Ef
+ ) ; ZSK; alg = NSEC3RSASHA1; key id = 29747
+ example.com. 300 IN DNSKEY 257 3 7 (
+ AwEAAc1BQN...Wdc0qoH21H
+ ) ; KSK; alg = NSEC3RSASHA1; key id = 23550
+ example.com. 300 IN RRSIG DNSKEY 7 2 300 (
+ 20210208000000 20210105230000 23550 mydnssecgood.org.
+ Qw9Em3dDok...bNCS7KISw= )
+ example.com. 300 IN RRSIG DNSKEY 7 2 300 (
+ 20210208000000 20210105230000 29747 mydnssecgood.org.
+ OuelpIlpY9...XfsKupQgc= )
+ ...
+
+Since the key with the ID 24828 is gone, you can now remove the old DS
+record for that key from our parent zone.
+Be careful to remove the correct DS record. If you accidentally remove
+the new DS record(s) with key ID 23550, it could lead to a problem called
+"security lameness," as discussed in
+:ref:`troubleshooting_security_lameness`, and may cause users to be unable
+to resolve any names in the zone.
+
+1. After logging in (again, GoDaddy.com in our example) and launching the domain, scroll down to the "DS
+ Records" section and click Manage.
+
+ .. _remove-ds-1:
+
+ .. figure:: ../dnssec-guide/img/remove-ds-1.png
+ :alt: Remove DS Record Step #1
+ :width: 40.0%
+
+ Remove DS Record Step #1
+
+2. A dialog appears, displaying both keys (24828 and 23550). Use the far
+ right-hand X button to remove key 24828.
+
+ .. _remove-ds-2:
+
+ .. figure:: ../dnssec-guide/img/remove-ds-2.png
+ :alt: Remove DS Record Step #2
+ :width: 80.0%
+
+ Remove DS Record Step #2
+
+3. Key 24828 now appears crossed out; click "Save" to complete the
+ removal.
+
+ .. _remove-ds-3:
+
+ .. figure:: ../dnssec-guide/img/remove-ds-3.png
+ :alt: Remove DS Record Step #3
+ :width: 80.0%
+
+ Remove DS Record Step #3
+
+Congratulations, the KSK rollover is complete! As for the actual key
+files (ending in ``.key`` and ``.private``), they may be deleted at this
+point, but they do not have to be.
+
+.. [#]
+ The screenshots were taken from GoDaddy's interface at the time the
+ original version of this guide was published (2015). It may have
+ changed since then.
+
+.. _recipes_nsec3:
+
+NSEC and NSEC3
+~~~~~~~~~~~~~~
+
+.. _recipes_nsec_to_nsec3:
+
+Migrating from NSEC to NSEC3
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+This recipe describes how to transition from using NSEC to NSEC3, as described
+in :ref:`advanced_discussions_proof_of_nonexistence`. This recipe
+assumes that the zones are already signed, and that :iscman:`named` is configured
+according to the steps described in
+:ref:`easy_start_guide_for_authoritative_servers`.
+
+.. warning::
+
+ If your zone is signed with RSASHA1 (algorithm 5), you cannot migrate
+ to NSEC3 without also performing an
+ algorithm rollover
+ to RSASHA1-NSEC3-SHA1 (algorithm 7), as described in
+ :ref:`advanced_discussions_DNSKEY_algorithm_rollovers`. This
+ ensures that older validating resolvers that do not understand
+ NSEC3 will fall back to treating the zone as unsecured (rather than
+ "bogus"), as described in Section 2 of :rfc:`5155`.
+
+To enable NSEC3, update your :any:`dnssec-policy` and add the desired NSEC3
+parameters. The example below enables NSEC3 for zones with the ``standard``
+DNSSEC policy, using 0 additional iterations, no opt-out, and a zero-length salt:
+
+::
+
+ dnssec-policy "standard" {
+ nsec3param iterations 0 optout no salt-length 0;
+ };
+
+Then reconfigure the server with :iscman:`rndc`. You can tell that it worked if you
+see the following debug log messages:
+
+::
+
+ Oct 21 13:47:21 received control channel command 'reconfig'
+ Oct 21 13:47:21 zone example.com/IN (signed): zone_addnsec3chain(1,CREATE,0,-)
+
+You can also verify that it worked by querying for a name that you know
+does not exist, and checking for the presence of the NSEC3 record.
+For example:
+
+::
+
+ $ dig @192.168.1.13 thereisnowaythisexists.example.com. A +dnssec +multiline
+
+ ...
+ 5A03TL362CS8VSIH69CVA4MJIKRHFQH3.example.com. 300 IN NSEC3 1 0 0 - (
+ TQ9QBEGA6CROHEOC8KIH1A2C06IVQ5ER
+ NS SOA RRSIG DNSKEY NSEC3PARAM )
+ ...
+
+Our example used four parameters: 1, 0, 0, and -, in
+order. 1 represents the algorithm, 0 represents the
+opt-out flag, 0 represents the number of additional iterations, and
+- denotes no salt is used. To learn more about each of these
+parameters, please see :ref:`advanced_discussions_nsec3param`.
+
+.. _recipes_nsec3_to_nsec:
+
+Migrating from NSEC3 to NSEC
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Migrating from NSEC3 back to NSEC is easy; just remove the :any:`nsec3param`
+configuration option from your :any:`dnssec-policy` and reconfigure the name
+server. You can tell that it worked if you see these messages in the log:
+
+::
+
+ named[14093]: received control channel command 'reconfig'
+ named[14093]: zone example.com/IN: zone_addnsec3chain(1,REMOVE,0,-)
+
+You can also query for a name that you know does not exist,
+and you should no longer see any traces of NSEC3 records.
+
+::
+
+ $ dig @192.168.1.13 reieiergiuhewhiouwe.example.com. A +dnssec +multiline
+
+ ...
+ example.com. 300 IN NSEC aaa.example.com. NS SOA RRSIG NSEC DNSKEY
+ ...
+ ns1.example.com. 300 IN NSEC web.example.com. A RRSIG NSEC
+ ...
+
+.. _recipes_nsec3_optout:
+
+NSEC3 Opt-Out
+^^^^^^^^^^^^^
+
+This recipe discusses how to enable and disable NSEC3 opt-out, and how to show
+the results of each action. As discussed in
+:ref:`advanced_discussions_nsec3_optout`, NSEC3 opt-out is a feature
+that can help conserve resources on parent zones with many
+delegations that have not yet been signed.
+
+.. warning::
+ NSEC3 Opt-Out feature brings benefit only to _extremely_ large zones with lots
+ of insecure delegations. It's use is counterproductive in all other cases as
+ it decreases tamper-resistance of the zone and also decreases efficiency of
+ resolver cache (see :rfc:`8198`).
+
+ In other words, don't enable Opt-Out unless you are serving an equivalent of
+ ``com.`` zone.
+
+Because the NSEC3PARAM record does not keep track of whether opt-out is used,
+it is hard to check whether changes need to be made to the NSEC3 chain if the flag
+is changed. Similar to changing the NSEC3 salt, your best option is to change
+the value of ``optout`` together with another NSEC3 parameter, like
+``iterations``, and in a following step restore the ``iterations`` value.
+
+For this recipe we assume the zone ``example.com``
+has the following four entries (for this example, it is not relevant what
+record types these entries are):
+
+- ``ns1.example.com``
+
+- ``ftp.example.com``
+
+- ``www.example.com``
+
+- ``web.example.com``
+
+And the zone ``example.com`` has five delegations to five subdomains, only one of
+which is signed and has a valid DS RRset:
+
+- ``aaa.example.com``, not signed
+
+- ``bbb.example.com``, signed
+
+- ``ccc.example.com``, not signed
+
+- ``ddd.example.com``, not signed
+
+- ``eee.example.com``, not signed
+
+Before enabling NSEC3 opt-out, the zone ``example.com`` contains ten
+NSEC3 records; below is the list with the plain text name before the actual
+NSEC3 record:
+
+- *aaa.example.com*: IFA1I3IE7EKCTPHM6R58URO3Q846I52M.example.com
+
+- *bbb.example.com*: ROJUF3VJSJO6LQ2LC1DNSJ5GBAUJPVHE.example.com
+
+- *ccc.example.com*: 0VPUT696LUVDPDS5NIHSHBH9KLV20V5K.example.com
+
+- *ddd.example.com*: UHPBD5U4HRGB84MLC2NQOVEFNAKJU0CA.example.com
+
+- *eee.example.com*: NF7I61FA4C2UEKPMEDSOC25FE0UJIMKT.example.com
+
+- *ftp.example.com*: 8P15KCUAT1RHCSDN46HBQVPI5T532IN1.example.com
+
+- *ns1.example.com*: GUFVRA2SFIO8RSFP7UO41E8AD1KR41FH.example.com
+
+- *web.example.com*: CVQ4LA4ALPQIAO2H3N2RB6IR8UHM91E7.example.com
+
+- *www.example.com*: MIFDNDT3NFF3OD53O7TLA1HRFF95JKUK.example.com
+
+- *example.com*: ONIB9MGUB9H0RML3CDF5BGRJ59DKJHVK.example.com
+
+We can enable NSEC3 opt-out with the following configuration, changing
+the ``optout`` configuration value from ``no`` to ``yes``:
+
+::
+
+ dnssec-policy "standard" {
+ nsec3param iterations 0 optout yes salt-length 0;
+ };
+
+After NSEC3 opt-out is enabled, the number of NSEC3 records is reduced.
+Notice that the unsigned delegations ``aaa``, ``ccc``, ``ddd``, and
+``eee`` no longer have corresponding NSEC3 records.
+
+- *bbb.example.com*: ROJUF3VJSJO6LQ2LC1DNSJ5GBAUJPVHE.example.com
+
+- *ftp.example.com*: 8P15KCUAT1RHCSDN46HBQVPI5T532IN1.example.com
+
+- *ns1.example.com*: GUFVRA2SFIO8RSFP7UO41E8AD1KR41FH.example.com
+
+- *web.example.com*: CVQ4LA4ALPQIAO2H3N2RB6IR8UHM91E7.example.com
+
+- *www.example.com*: MIFDNDT3NFF3OD53O7TLA1HRFF95JKUK.example.com
+
+- *example.com*: ONIB9MGUB9H0RML3CDF5BGRJ59DKJHVK.example.com
+
+To undo NSEC3 opt-out, change the configuration again:
+
+::
+
+ dnssec-policy "standard" {
+ nsec3param iterations 0 optout no salt-length 0;
+ };
+
+.. note::
+
+ NSEC3 hashes the plain text domain name, and we can compute our own
+ hashes using the tool :iscman:`nsec3hash`. For example, to compute the
+ hashed name for ``www.example.com`` using the parameters we listed
+ above, we can execute this command:
+
+ ::
+
+ # nsec3hash - 1 0 www.example.com.
+ MIFDNDT3NFF3OD53O7TLA1HRFF95JKUK (salt=-, hash=1, iterations=0)
+
+.. _revert_to_unsigned:
+
+Reverting to Unsigned
+~~~~~~~~~~~~~~~~~~~~~
+
+This recipe describes how to revert from a signed zone (DNSSEC) back to
+an unsigned (DNS) zone.
+
+Here is what :iscman:`named.conf` looks like when it is signed:
+
+.. code-block:: none
+ :emphasize-lines: 4
+
+ zone "example.com" IN {
+ type primary;
+ file "db/example.com.db";
+ dnssec-policy "default";
+ inline-signing yes;
+ };
+
+To indicate the reversion to unsigned, change the :any:`dnssec-policy` line:
+
+.. code-block:: none
+ :emphasize-lines: 4
+
+ zone "example.com" IN {
+ type primary;
+ file "db/example.com.db";
+ dnssec-policy "insecure";
+ inline-signing yes;
+ };
+
+Then use :option:`rndc reload` to reload the zone.
+
+The "insecure" policy is a built-in policy (like "default"). It makes sure
+the zone is still DNSSEC-maintained, to allow for a graceful transition to
+unsigned. It also publishes the CDS and CDNSKEY DELETE records automatically
+at the appropriate time.
+
+If the parent zone allows management of DS records via CDS/CDNSKEY, as described in
+:rfc:`8078`, the DS record should be removed from the parent automatically.
+
+Otherwise, DS records can be removed via the registrar. Below is an example
+showing how to remove DS records using the
+`GoDaddy <https://www.godaddy.com>`__ web-based interface:
+
+1. After logging in, click the green "Launch" button next to the domain
+ name you want to manage.
+
+.. _unsign-1:
+
+ .. figure:: ../dnssec-guide/img/unsign-1.png
+ :alt: Revert to Unsigned Step #1
+ :width: 60.0%
+
+ Revert to Unsigned Step #1
+
+2. Scroll down to the "DS Records" section and click Manage.
+
+.. _unsign-2:
+
+ .. figure:: ../dnssec-guide/img/unsign-2.png
+ :alt: Revert to Unsigned Step #2
+ :width: 40.0%
+
+ Revert to Unsigned Step #2
+
+3. A dialog appears, displaying all current keys. Use the far right-hand
+ X button to remove each key.
+
+.. _unsign-3:
+
+ .. figure:: ../dnssec-guide/img/unsign-3.png
+ :alt: Revert to Unsigned Step #3
+ :width: 70.0%
+
+ Revert to Unsigned Step #3
+
+4. Click Save.
+
+.. _unsign-4:
+
+ .. figure:: ../dnssec-guide/img/unsign-4.png
+ :alt: Revert to Unsigned Step #4
+ :width: 70.0%
+
+ Revert to Unsigned Step #4
+
+When the DS records have been removed from the parent zone, use
+:option:`rndc dnssec -checkds -key id withdrawn example.com <rndc dnssec>` to tell :iscman:`named` that
+the DS is removed, and the remaining DNSSEC records will be removed in a timely
+manner. Or, if parental agents are configured, the DNSSEC records will be
+automatically removed after BIND has seen that the parental agents no longer
+serve the DS RRset for this zone.
+
+After a while, the zone is reverted back to the traditional, insecure DNS
+format. This can be verified by checking that all DNSKEY and RRSIG records have been
+removed from the zone.
+
+The :any:`dnssec-policy` line can then be removed from :iscman:`named.conf` and
+the zone reloaded. The zone will no longer be subject to any DNSSEC
+maintenance.
diff --git a/doc/dnssec-guide/signing.rst b/doc/dnssec-guide/signing.rst
new file mode 100644
index 0000000..8d3c159
--- /dev/null
+++ b/doc/dnssec-guide/signing.rst
@@ -0,0 +1,1474 @@
+.. Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+..
+.. SPDX-License-Identifier: MPL-2.0
+..
+.. This Source Code Form is subject to the terms of the Mozilla Public
+.. License, v. 2.0. If a copy of the MPL was not distributed with this
+.. file, you can obtain one at https://mozilla.org/MPL/2.0/.
+..
+.. See the COPYRIGHT file distributed with this work for additional
+.. information regarding copyright ownership.
+
+.. _dnssec_signing:
+
+Signing
+-------
+
+.. _easy_start_guide_for_authoritative_servers:
+
+Easy-Start Guide for Signing Authoritative Zones
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This section provides the basic information needed to set up a
+DNSSEC-enabled authoritative name server. A DNSSEC-enabled (or
+"signed") zone contains additional resource records that are used to
+verify the authenticity of its zone information.
+
+To convert a traditional (insecure) DNS zone to a secure one, we need to
+create some additional records (DNSKEY, RRSIG, and NSEC or NSEC3), and
+upload verifiable information (such as a DS record) to the parent zone to
+complete the chain of trust. For more information about DNSSEC resource
+records, please see :ref:`what_does_dnssec_add_to_dns`.
+
+.. note::
+
+ In this chapter, we assume all configuration files, key files, and
+ zone files are stored in ``/etc/bind``, and most examples show
+ commands run as the root user. This may not be ideal, but the point is
+ not to distract from what is important here: learning how to sign
+ a zone. There are many best practices for deploying a more secure
+ BIND installation, with techniques such as jailed process and
+ restricted user privileges, but those are not covered
+ in this document. We trust you, a responsible DNS
+ administrator, to take the necessary precautions to secure your
+ system.
+
+For the examples below, we work with the assumption that
+there is an existing insecure zone ``example.com`` that we are
+converting to a secure zone.
+
+.. _signing_easy_start_policy_enable:
+
+Enabling Automated DNSSEC Zone Maintenance and Key Generation
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+To sign a zone, add the following statement to its
+:any:`zone` clause in the BIND 9 configuration file:
+
+::
+
+ options {
+ directory "/etc/bind";
+ recursion no;
+ ...
+ };
+
+ zone "example.com" in {
+ ...
+ dnssec-policy default;
+ inline-signing yes;
+ ...
+ };
+
+The :any:`dnssec-policy` statement causes the zone to be signed and turns
+on automatic maintenance for the zone. This includes re-signing the zone
+as signatures expire and replacing keys on a periodic basis. The value
+``default`` selects the default policy, which contains values suitable
+for most situations. We cover the creation of a custom policy in
+:ref:`signing_custom_policy`, but for the moment we are accepting the
+default values.
+
+Using :any:`dnssec-policy` requires dynamic DNS or :any:`inline-signing`
+to be enabled.
+
+.. note::
+
+ Previously, if a zone with a :any:`dnssec-policy` did not have dynamic
+ DNS set up and :any:`inline-signing` was not explicity set, BIND 9 used
+ inline-signing implicitly. But this caused a lot of problems when operators
+ switched on or off dynamic DNS for their zones. Therefor, you now have to
+ configure it explicitly.
+
+When the configuration file is updated, tell :iscman:`named` to
+reload the configuration file by running :option:`rndc reconfig`:
+
+::
+
+ # rndc reconfig
+
+And that's it - BIND signs your zone.
+
+At this point, before you go away and merrily add :any:`dnssec-policy`
+statements to all your zones, we should mention that, like a number of
+other BIND configuration options, its scope depends on where it is placed. In
+the example above, we placed it in a :any:`zone` clause, so it applied only
+to the zone in question. If we had placed it in a :any:`view` clause, it
+would have applied to all zones in the view; and if we had placed it in
+the :namedconf:ref:`options` clause, it would have applied to all zones served by
+this instance of BIND.
+
+.. _signing_verification:
+
+Verification
+^^^^^^^^^^^^
+
+The BIND 9 reconfiguration starts the process of signing the zone.
+First, it generates a key for the zone and includes it
+in the published zone. The log file shows messages such as these:
+
+::
+
+ 07-Apr-2020 16:02:55.045 zone example.com/IN (signed): reconfiguring zone keys
+ 07-Apr-2020 16:02:55.045 reloading configuration succeeded
+ 07-Apr-2020 16:02:55.046 keymgr: DNSKEY example.com/ECDSAP256SHA256/10376 (CSK) created for policy default
+ 07-Apr-2020 16:02:55.046 Fetching example.com/ECDSAP256SHA256/10376 (CSK) from key repository.
+ 07-Apr-2020 16:02:55.046 DNSKEY example.com/ECDSAP256SHA256/10376 (CSK) is now published
+ 07-Apr-2020 16:02:55.046 DNSKEY example.com/ECDSAP256SHA256/10376 (CSK) is now active
+ 07-Apr-2020 16:02:55.048 zone example.com/IN (signed): next key event: 07-Apr-2020 18:07:55.045
+
+It then starts signing the zone. How long this process takes depends on the
+size of the zone, the speed of the server, and how much activity is
+taking place. We can check what is happening by using :iscman:`rndc`,
+entering the command:
+
+::
+
+ # rndc signing -list example.com
+
+While the signing is in progress, the output is something like:
+
+::
+
+ Signing with key 10376/ECDSAP256SHA256
+
+and when it is finished:
+
+::
+
+ Done signing with key 10376/ECDSAP256SHA256
+
+When the second message appears, the zone is signed.
+
+Before moving on to the next step of coordinating with the parent zone,
+let's make sure everything looks good using :iscman:`delv`. We want to
+simulate what a validating resolver will check, by telling
+:iscman:`delv` to use a specific trust anchor.
+
+First, we need to make a copy of the key created by BIND. This
+is in the directory you set with the :any:`directory` statement in
+your configuration file's :namedconf:ref:`options` clause, and is named something
+like ``Kexample.com.+013.10376.key``:
+
+::
+
+ # cp /etc/bind/Kexample.com.+013+10376.key /tmp/example.key
+
+The original key file looks like this (with the actual key shortened for ease of display,
+and comments omitted):
+
+::
+
+ # cat /etc/bind/Kexample.com.+013+10376.key
+
+ ...
+ example.com. 3600 IN DNSKEY 257 3 13 6saiq99qDB...dqp+o0dw==
+
+We want to edit the copy to be in the :any:`trust-anchors` format, so that
+it looks like this:
+
+::
+
+ # cat /tmp/example.key
+ trust-anchors {
+ example.com. static-key 257 3 13 "6saiq99qDB...dqp+o0dw==";
+ };
+
+Now we can run the :iscman:`delv` command and instruct it to use this
+trusted-key file to validate the answer it receives from the
+authoritative name server 192.168.1.13:
+
+::
+
+ $ delv @192.168.1.13 -a /tmp/example.key +root=example.com example.com. SOA +multiline
+ ; fully validated
+ example.com. 600 IN SOA ns1.example.com. admin.example.com. (
+ 2020040703 ; serial
+ 1800 ; refresh (30 minutes)
+ 900 ; retry (15 minutes)
+ 2419200 ; expire (4 weeks)
+ 300 ; minimum (5 minutes)
+ )
+ example.com. 600 IN RRSIG SOA 13 2 600 (
+ 20200421150255 20200407140255 10376 example.com.
+ jBsz92zwAcGMNV/yu167aKQZvFyC7BiQe1WEnlogdLTF
+ oq4yBQumOhO5WX61LjA17l1DuLWcd/ASwlUZWFGCYQ== )
+
+.. _signing_easy_start_upload_to_parent_zone:
+
+Uploading Information to the Parent Zone
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Once everything is complete on our name server, we need to generate some
+information to be uploaded to the parent zone to complete the chain of
+trust. The format and the upload methods are actually dictated by your
+parent zone's administrator, so contact your registrar or parent zone
+administrator to find out what the actual format should be and how to
+deliver or upload the information to the parent zone.
+
+What about your zone between the time you signed it and the time your
+parent zone accepts the upload? To the rest of the world, your
+zone still appears to be insecure, because if a validating
+resolver attempts to validate your domain name via
+your parent zone, your parent zone will indicate that you are
+not yet signed (as far as it knows). The validating resolver will then
+give up attempting to validate your domain name, and will fall back to the
+insecure DNS. Until you complete this final step with your
+parent zone, your zone remains insecure.
+
+.. note::
+
+ Before uploading to your parent zone, verify that your newly signed
+ zone has propagated to all of your name servers (usually via zone
+ transfers). If some of your name servers still have unsigned zone
+ data while the parent tells the world it should be signed, validating
+ resolvers around the world cannot resolve your domain name.
+
+Here are some examples of what you may upload to your parent zone, with
+the DNSKEY/DS data shortened for display. Note that no matter what
+format may be required, the end result is the parent zone
+publishing DS record(s) based on the information you upload. Again,
+contact your parent zone administrator(s) to find out the
+correct format for their system.
+
+1. DS record format:
+
+ ::
+
+ example.com. 3600 IN DS 10376 13 2 B92E22CAE0...33B8312EF0
+
+2. DNSKEY format:
+
+ ::
+
+ example.com. 3600 IN DNSKEY 257 3 13 6saiq99qDB...dqp+o0dw==
+
+The DS record format may be generated from the DNSKEY using the
+:iscman:`dnssec-dsfromkey` tool, which is covered in
+:ref:`parent_ds_record_format`. For more details and examples on how
+to work with your parent zone, please see
+:ref:`working_with_parent_zone`.
+
+.. _signing_easy_start_so_what_now:
+
+So... What Now?
+^^^^^^^^^^^^^^^
+
+Congratulations! Your zone is signed, your secondary servers have
+received the new zone data, and the parent zone has accepted your upload
+and published your DS record. Your zone is now officially
+DNSSEC-enabled. What happens next? That is basically it - BIND
+takes care of everything else. As for updating your zone file, you can
+continue to update it the same way as prior to signing your
+zone; the normal work flow of editing a zone file and using the :iscman:`rndc`
+command to reload the zone still works as usual, and although you are
+editing the unsigned version of the zone, BIND generates the signed
+version automatically.
+
+Curious as to what all these commands did to your zone file? Read on to
+:ref:`your_zone_before_and_after_dnssec` and find out. If you are
+interested in how to roll this out to your existing primary and
+secondary name servers, check out :ref:`recipes_inline_signing` in
+the :ref:`dnssec_recipes` chapter.
+
+.. _your_zone_before_and_after_dnssec:
+
+Your Zone, Before and After DNSSEC
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When we assigned the default DNSSEC policy to the zone, we provided the
+minimal amount of information to convert a traditional DNS
+zone into a DNSSEC-enabled zone. This is what the zone looked like
+before we started:
+
+::
+
+ $ dig @192.168.1.13 example.com. AXFR +multiline +onesoa
+
+ ; <<>> DiG 9.16.0 <<>> @192.168.1.13 example.com AXFR +multiline +onesoa
+ ; (1 server found)
+ ;; global options: +cmd
+ example.com. 600 IN SOA ns1.example.com. admin.example.com. (
+ 2020040700 ; serial
+ 1800 ; refresh (30 minutes)
+ 900 ; retry (15 minutes)
+ 2419200 ; expire (4 weeks)
+ 300 ; minimum (5 minutes)
+ )
+ example.com. 600 IN NS ns1.example.com.
+ ftp.example.com. 600 IN A 192.168.1.200
+ ns1.example.com. 600 IN A 192.168.1.1
+ web.example.com. 600 IN CNAME www.example.com.
+ www.example.com. 600 IN A 192.168.1.100
+
+Below shows the test zone ``example.com`` after reloading the
+server configuration. Clearly, the zone grew in size, and the
+number of records multiplied:
+
+::
+
+ # dig @192.168.1.13 example.com. AXFR +multiline +onesoa
+
+ ; <<>> DiG 9.16.0 <<>> @192.168.1.13 example.com AXFR +multiline +onesoa
+ ; (1 server found)
+ ;; global options: +cmd
+ example.com. 600 IN SOA ns1.example.com. admin.example.com. (
+ 2020040703 ; serial
+ 1800 ; refresh (30 minutes)
+ 900 ; retry (15 minutes)
+ 2419200 ; expire (4 weeks)
+ 300 ; minimum (5 minutes)
+ )
+ example.com. 300 IN RRSIG NSEC 13 2 300 (
+ 20200413050536 20200407140255 10376 example.com.
+ drtV1rJbo5OMi65OJtu7Jmg/thgpdTWrzr6O3Pzt12+B
+ oCxMAv3orWWYjfP2n9w5wj0rx2Mt2ev7MOOG8IOUCA== )
+ example.com. 300 IN NSEC ftp.example.com. NS SOA RRSIG NSEC DNSKEY TYPE65534
+ example.com. 600 IN RRSIG NS 13 2 600 (
+ 20200413130638 20200407140255 10376 example.com.
+ 2ipmzm1Ei6vfE9OLowPMsxLBCbjrCpWPgWJ0ekwZBbux
+ MLffZOXn8clt0Ql2U9iCPdyoQryuJCiojHSE2d6nrw== )
+ example.com. 600 IN RRSIG SOA 13 2 600 (
+ 20200421150255 20200407140255 10376 example.com.
+ jBsz92zwAcGMNV/yu167aKQZvFyC7BiQe1WEnlogdLTF
+ oq4yBQumOhO5WX61LjA17l1DuLWcd/ASwlUZWFGCYQ== )
+ example.com. 0 IN RRSIG TYPE65534 13 2 0 (
+ 20200413050536 20200407140255 10376 example.com.
+ Xjkom24N6qeCJjg9BMUfuWf+euLeZB169DHvLYZPZNlm
+ GgM2czUDPio6VpQbUw6JE5DSNjuGjgpgXC5SipC42g== )
+ example.com. 3600 IN RRSIG DNSKEY 13 2 3600 (
+ 20200421150255 20200407140255 10376 example.com.
+ maK75+28oUyDtci3V7wjTsuhgkLUZW+Q++q46Lea6bKn
+ Xj77kXcLNogNdUOr5am/6O6cnPeJKJWsnmTLISm62g== )
+ example.com. 0 IN TYPE65534 \# 5 ( 0D28880001 )
+ example.com. 3600 IN DNSKEY 257 3 13 (
+ 6saiq99qDBb5b4G4cx13cPjFTrIvUs3NW44SvbbHorHb
+ kXwOzeGAWyPORN+pwEV/LP9+FHAF/JzAJYdqp+o0dw==
+ ) ; KSK; alg = ECDSAP256SHA256 ; key id = 10376
+ example.com. 600 IN NS ns1.example.com.
+ ftp.example.com. 600 IN RRSIG A 13 3 600 (
+ 20200413130638 20200407140255 10376 example.com.
+ UYo1njeUA49VhKnPSS3JO4G+/Xd2PD4m3Vaacnd191yz
+ BIoouEBAGPcrEM2BNrgR0op1EWSus9tG86SM1ZHGuQ== )
+ ftp.example.com. 300 IN RRSIG NSEC 13 3 300 (
+ 20200413130638 20200407140255 10376 example.com.
+ rPADrAMAPIPSF3S45OSY8kXBTYMS3nrZg4Awj7qRL+/b
+ sOKy6044MbIbjg+YWL69dBjKoTSeEGSCSt73uIxrYA== )
+ ftp.example.com. 300 IN NSEC ns1.example.com. A RRSIG NSEC
+ ftp.example.com. 600 IN A 192.168.1.200
+ ns1.example.com. 600 IN RRSIG A 13 3 600 (
+ 20200413130638 20200407140255 10376 example.com.
+ Yeojg7qrJmxL6uLTnALwKU5byNldZ9Ggj5XjcbpPvujQ
+ ocG/ovGBg6pdugXC9UxE39bCDl8dua1frjDcRCCZAA== )
+ ns1.example.com. 300 IN RRSIG NSEC 13 3 300 (
+ 20200413130638 20200407140255 10376 example.com.
+ vukgQme6k7JwCf/mJOOzHXbE3fKtSro+Kc10T6dHMdsc
+ oM1/oXioZvgBZ9cKrQhIAUt7r1KUnrUwM6Je36wWFA== )
+ ns1.example.com. 300 IN NSEC web.example.com. A RRSIG NSEC
+ ns1.example.com. 600 IN A 192.168.1.1
+ web.example.com. 600 IN RRSIG CNAME 13 3 600 (
+ 20200413130638 20200407140255 10376 example.com.
+ JXi4WYypofD5geUowVqlqJyHzvcRnsvU/ONhTBaUCw5Y
+ XtifKAXRHWrUL1HIwt37JYPLf5uYu90RfkWLj0GqTQ== )
+ web.example.com. 300 IN RRSIG NSEC 13 3 300 (
+ 20200413130638 20200407140255 10376 example.com.
+ XF4Hsd58dalL+s6Qu99bG80PQyMf7ZrHEzDiEflRuykP
+ DfBRuf34z27vj70LO1lp2ZiX4BB1ahcEK2ae9ASAmA== )
+ web.example.com. 300 IN NSEC www.example.com. CNAME RRSIG NSEC
+ web.example.com. 600 IN CNAME www.example.com.
+ www.example.com. 600 IN RRSIG A 13 3 600 (
+ 20200413050536 20200407140255 10376 example.com.
+ mACKXrDOF5JMWqncSiQ3pYWA6abyGDJ4wgGCumjLXhPy
+ 0cMzJmKv2s7G6+tW3TsA6BK3UoMfv30oblY2Mnl4/A== )
+ www.example.com. 300 IN RRSIG NSEC 13 3 300 (
+ 20200413050536 20200407140255 10376 example.com.
+ 1YQ22odVt0TeP5gbNJwkvS684ipDmx6sEOsF0eCizhCv
+ x8osuOATdlPjIEztt+rveaErZ2nsoLor5k1nQAHsbQ== )
+ www.example.com. 300 IN NSEC example.com. A RRSIG NSEC
+ www.example.com. 600 IN A 192.168.1.100
+
+But this is a really messy way to tell if the zone is set up properly
+with DNSSEC. Fortunately, there are tools to help us with that. Read on
+to :ref:`how_to_test_authoritative_server` to learn more.
+
+.. _how_to_test_authoritative_server:
+
+How To Test Authoritative Zones
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+So we've activated DNSSEC and uploaded some data to our parent zone. How
+do we know our zone is signed correctly? Here are a few ways to check.
+
+.. _signing_verify_key_data:
+
+Look for Key Data in Your Zone
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+One way to see if your zone is signed is to check for the
+presence of DNSKEY record types. In our example, we created a single
+key, and we expect to see it returned when we query for it.
+
+::
+
+ $ dig @192.168.1.13 example.com. DNSKEY +multiline
+
+ ; <<>> DiG 9.16.0 <<>> @10.53.0.6 example.com DNSKEY +multiline
+ ; (1 server found)
+ ;; global options: +cmd
+ ;; Got answer:
+ ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 18637
+ ;; flags: qr aa rd; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1
+ ;; WARNING: recursion requested but not available
+
+ ;; OPT PSEUDOSECTION:
+ ; EDNS: version: 0, flags:; udp: 4096
+ ; COOKIE: efe186423313fb66010000005e8c997e99864f7d69ed7c11 (good)
+ ;; QUESTION SECTION:
+ ;example.com. IN DNSKEY
+
+ ;; ANSWER SECTION:
+ example.com. 3600 IN DNSKEY 257 3 13 (
+ 6saiq99qDBb5b4G4cx13cPjFTrIvUs3NW44SvbbHorHb
+ kXwOzeGAWyPORN+pwEV/LP9+FHAF/JzAJYdqp+o0dw==
+ ) ; KSK; alg = ECDSAP256SHA256 ; key id = 10376
+
+
+.. _signing_verify_signature:
+
+Look for Signatures in Your Zone
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Another way to see if your zone data is signed is to check for the
+presence of a signature. With DNSSEC, every record [#]_ now comes with at
+least one corresponding signature, known as an RRSIG.
+
+::
+
+ $ dig @192.168.1.13 example.com. SOA +dnssec +multiline
+
+ ; <<>> DiG 9.16.0 <<>> @10.53.0.6 example.com SOA +dnssec +multiline
+ ; (1 server found)
+ ;; global options: +cmd
+ ;; Got answer:
+ ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 45219
+ ;; flags: qr aa rd; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 1
+ ;; WARNING: recursion requested but not available
+
+ ;; OPT PSEUDOSECTION:
+ ; EDNS: version: 0, flags: do; udp: 4096
+ ; COOKIE: 75adff4f4ce916b2010000005e8c99c0de47eabb7951b2f5 (good)
+ ;; QUESTION SECTION:
+ ;example.com. IN SOA
+
+ ;; ANSWER SECTION:
+ example.com. 600 IN SOA ns1.example.com. admin.example.com. (
+ 2020040703 ; serial
+ 1800 ; refresh (30 minutes)
+ 900 ; retry (15 minutes)
+ 2419200 ; expire (4 weeks)
+ 300 ; minimum (5 minutes)
+ )
+ example.com. 600 IN RRSIG SOA 13 2 600 (
+ 20200421150255 20200407140255 10376 example.com.
+ jBsz92zwAcGMNV/yu167aKQZvFyC7BiQe1WEnlogdLTF
+ oq4yBQumOhO5WX61LjA17l1DuLWcd/ASwlUZWFGCYQ== )
+
+The serial number was automatically incremented from the old, unsigned
+version. :iscman:`named` keeps track of the serial number of the signed version of
+the zone independently of the unsigned version. If the unsigned zone is
+updated with a new serial number that is higher than the one in the
+signed copy, then the signed copy is increased to match it;
+otherwise, the two are kept separate.
+
+.. _signing_verify_zone_file:
+
+Examine the Zone File
+^^^^^^^^^^^^^^^^^^^^^
+
+Our original zone file ``example.com.db`` remains untouched, and :iscman:`named` has
+generated three additional files automatically for us (shown below). The
+signed DNS data is stored in ``example.com.db.signed`` and in the
+associated journal file.
+
+::
+
+ # cd /etc/bind
+ # ls
+ example.com.db example.com.db.jbk example.com.db.signed example.com.db.signed.jnl
+
+A quick description of each of the files:
+
+- ``.jbk``: a transient file used by :iscman:`named`
+
+- ``.signed``: the signed version of the zone in raw format
+
+- ``.signed.jnl``: a journal file for the signed version of the zone
+
+These files are stored in raw (binary) format for faster loading. To
+reveal the human-readable version, use :iscman:`named-compilezone`
+as shown below. In the example below, we run the command on the
+raw format zone ``example.com.db.signed`` to produce a text version of
+the zone ``example.com.text``:
+
+::
+
+ # named-compilezone -f raw -F text -o example.com.text example.com example.com.db.signed
+ zone example.com/IN: loaded serial 2014112008 (DNSSEC signed)
+ dump zone to example.com.text...done
+ OK
+
+.. _signing_verify_check_parent:
+
+Check the Parent
+^^^^^^^^^^^^^^^^
+
+Although this is not strictly related to whether the zone is
+signed, a critical part of DNSSEC is the trust relationship between the
+parent and the child. Just because we, the child, have all the correctly
+signed records in our zone does not mean it can be fully validated by a
+validating resolver, unless our parent's data agrees with ours. To check
+if our upload to the parent was successful, ask the parent name server
+for the DS record of our child zone; we should get back the DS record(s)
+containing the information we uploaded in
+:ref:`signing_easy_start_upload_to_parent_zone`:
+
+::
+
+ $ dig example.com. DS
+
+ ; <<>> DiG 9.16.0 <<>> example.com DS
+ ; (1 server found)
+ ;; global options: +cmd
+ ;; Got answer:
+ ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 16954
+ ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1
+
+ ;; OPT PSEUDOSECTION:
+ ; EDNS: version: 0, flags:; udp: 4096
+ ; COOKIE: db280d5b52576780010000005e8c9bf5b0d8de103d934e5d (good)
+ ;; QUESTION SECTION:
+ ;example.com. IN DS
+
+ ;; ANSWER SECTION:
+ example.com. 61179 IN DS 10376 13 2 B92E22CAE0B41430EC38D3F7EDF1183C3A94F4D4748569250C15EE33B8312EF0
+
+.. [#]
+ Well, almost every record: NS records and glue records for
+ delegations do not have RRSIG records. If there are
+ no delegations, then every record in your zone is
+ signed and comes with its own RRSIG.
+
+.. _signing_verify_external_tools:
+
+External Testing Tools
+^^^^^^^^^^^^^^^^^^^^^^
+
+We recommend two tools, below: Verisign DNSSEC Debugger and DNSViz. Others can
+be found via a simple online search. These excellent online tools are an easy
+way to verify that your domain name is fully secured.
+
+.. _signing_verify_external_tools_dnssec_debugger:
+
+Verisign DNSSEC Debugger
+++++++++++++++++++++++++
+
+URL: `<https://dnssec-debugger.verisignlabs.com/>`__
+
+This tool shows a nice summary of checks performed on your domain name.
+You can expand it to view more details for each of the items checked, to
+get a detailed report.
+
+.. figure:: ../dnssec-guide/img/verisign-dnssec-debugger-example.png
+ :alt: Verisign DNSSEC Debugger
+
+ Verisign DNSSEC Debugger
+
+.. _signing_verify_external_tools_dnsviz:
+
+DNSViz
+++++++
+
+URL: `<https://dnsviz.net/>`__
+
+DNSViz provides a visual analysis of the DNSSEC authentication chain for
+a domain name and its resolution path in the DNS namespace.
+
+.. figure:: ../dnssec-guide/img/dnsviz-example-small.png
+ :alt: DNSViz
+ :width: 80.0%
+
+ DNSViz
+
+.. _signing_easy_start_explained:
+
+Signing Easy Start Explained
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. _enable_automatic_maintenance_explained:
+
+Enable Automatic DNSSEC Maintenance Explained
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Signing a zone requires a number of separate steps:
+
+- Generation of the keys to sign the zone.
+
+- Inclusion of the keys into the zone.
+
+- Signing of the records in the file (including the generation of the
+ NSEC or NSEC3 records).
+
+Maintaining a signed zone comprises a set of ongoing tasks:
+
+- Re-signing the zone as signatures approach expiration.
+
+- Generation of new keys as the time approaches for a key roll.
+
+- Inclusion of new keys into the zone when the rollover starts.
+
+- Transition from signing the zone with the old set of keys to signing
+ the zone with the new set of keys.
+
+- Waiting the appropriate interval before removing the old keys from
+ the zone.
+
+- Deleting the old keys.
+
+That is quite complex, and it is all handled in BIND 9 with the single
+``dnssec-policy default`` statement. We will see later on (in the
+:ref:`signing_custom_policy` section) how these actions can be tuned, by
+setting up our own DNSSEC policy with customized parameters. However, in many
+cases the defaults are adequate.
+
+At the time of this writing (mid-2020), :any:`dnssec-policy` is still a
+relatively new feature in BIND. Although it is the preferred
+way to run DNSSEC in a zone, it is not yet able to automatically implement
+all the features that are available
+with a more "hands-on" approach to signing and key maintenance. For this
+reason, we cover alternative signing techniques in
+:ref:`signing_alternative_ways`.
+
+.. _working_with_parent_zone:
+
+Working With the Parent Zone
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+As mentioned in :ref:`signing_easy_start_upload_to_parent_zone`,
+the format of the information uploaded to your parent zone is dictated
+by your parent zone administrator. The two main formats are:
+
+1. DS record format
+
+2. DNSKEY format
+
+Check with your parent zone to see which format they require.
+
+But how can you get each of the formats from your existing data?
+
+When :iscman:`named` turned on automatic
+DNSSEC maintenance, essentially the first thing it did was to create
+the DNSSEC keys and put them in the directory you specified in the
+configuration file. If you look in that directory, you will see three
+files with names like ``Kexample.com.+013+10376.key``,
+``Kexample.com.+013+10376.private``, and
+``Kexample.com.+013+10376.state``. The one we are interested in is the
+one with the ``.key`` suffix, which contains the zone's public key. (The
+other files contain the zone's private key and the DNSSEC state
+associated with the key.) This public key is used to generate the information we
+need to pass to the parent.
+
+.. _parent_ds_record_format:
+
+DS Record Format
+^^^^^^^^^^^^^^^^
+
+Below is an example of a DS record format generated from the KSK we
+created earlier (``Kexample.com.+013+10376.key``):
+
+::
+
+ # cd /etc/bind
+ dnssec-dsfromkey Kexample.com.+013+10376.key
+ example.com. IN DS 10376 13 2 B92E22CAE0B41430EC38D3F7EDF1183C3A94F4D4748569250C15EE33B8312EF0
+
+Some registrars ask their customers to manually specify the types of algorithm
+and digest used. In this example, 13 represents the algorithm used, and
+2 represents the digest type (SHA-256). The key tag or key ID is 10376.
+
+.. _parent_dnskey_format:
+
+DNSKEY Format
+^^^^^^^^^^^^^
+
+Below is an example of the same key ID (10376) using DNSKEY format
+(with the actual key shortened for ease of display):
+
+::
+
+ example.com. 3600 IN DNSKEY 257 3 13 (6saiq99qDB...dqp+o0dw==) ; key id = 10376
+
+The key itself is easy to find (it's difficult to miss that long
+base64 string) in the file.
+
+::
+
+ # cd /etc/bind
+ # cat Kexample.com.+013+10376.key
+ ; This is a key-signing key, keyid 10376, for example.com.
+ ; Created: 20200407150255 (Tue Apr 7 16:02:55 2020)
+ ; Publish: 20200407150255 (Tue Apr 7 16:02:55 2020)
+ ; Activate: 20200407150255 (Tue Apr 7 16:02:55 2020)
+ example.com. 3600 IN DNSKEY 257 3 13 6saiq99qDB...dqp+o0dw==
+
+.. _signing_custom_policy:
+
+Creating a Custom DNSSEC Policy
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The remainder of this section describes the contents of a custom DNSSEC
+policy. :ref:`dnssec_advanced_discussions` describes the concepts
+involved here and the pros and cons of choosing particular values. If
+you are not already familiar with DNSSEC, it may be worth reading that chapter
+first.
+
+Setting up your own DNSSEC policy means that you must include a
+:any:`dnssec-policy` clause in the zone file. This sets values for the
+various parameters that affect the signing of zones and the rolling of
+keys. The following is an example of such a clause:
+
+::
+
+ dnssec-policy standard {
+ dnskey-ttl 600;
+ keys {
+ ksk lifetime 365d algorithm ecdsap256sha256;
+ zsk lifetime 60d algorithm ecdsap256sha256;
+ };
+ max-zone-ttl 600;
+ parent-ds-ttl 600;
+ parent-propagation-delay 2h;
+ publish-safety 7d;
+ retire-safety 7d;
+ signatures-refresh 5d;
+ signatures-validity 15d;
+ signatures-validity-dnskey 15d;
+ zone-propagation-delay 2h;
+ };
+
+The policy has multiple parts:
+
+- The name must be specified. As each zone can use a different policy,
+ :iscman:`named` needs to be able to distinguish between policies. This is
+ done by giving each policy a name, such as ``standard`` in the above
+ example.
+
+- The :any:`keys` clause lists all keys that should be in the zone, along
+ with their associated parameters. In this example, we are using the
+ conventional KSK/ZSK split, with the KSK changed every year and the
+ ZSK changed every two months (the ``default`` DNSSEC policy sets a
+ CSK that is never changed). Keys are created using the
+ ECDSAPS256SHA256 algorithm; each KSK/ZSK pair must have the same
+ algorithm. A CSK combines the functionality of a ZSK and a KSK.
+
+- The parameters ending in ``-ttl`` are, as expected, the TTLs of the
+ associated records. Remember that during a key rollover,
+ we have to wait for records to expire from caches? The values
+ here tell BIND 9 the maximum amount of time it has to wait for this to
+ happen. Values can be set for the DNSKEY records in your zone, the
+ non-DNSKEY records in your zone, and the DS records in the parent
+ zone.
+
+- Another set of time-related parameters are those ending in
+ ``-propagation-delay``. These tell BIND how long it takes for a
+ change in zone contents to become available on all secondary servers.
+ (This may be non-negligible: for example, if a large zone is
+ transferred over a slow link.)
+
+- The policy also sets values for the various signature parameters: how
+ long the signatures on the DNSKEY and non-DNSKEY records are valid,
+ and how often BIND should re-sign the zone.
+
+- The parameters ending in ``-safety`` are there to give
+ you a bit of leeway in case a key roll doesn't go to plan. When
+ introduced into the zone, the :any:`publish-safety` time is the amount
+ of additional time, over and above that calculated from the other
+ parameters, during which the new key is in the zone but before BIND starts
+ to sign records with it. Similarly, the :any:`retire-safety` is the
+ amount of additional time, over and above that calculated from the
+ other parameters, during which the old key is retained in the zone before
+ being removed.
+
+- Finally, the :any:`purge-keys` option allows you to clean up key files
+ automatically after a period of time. If a key has been removed from the
+ zone, this option will determine how long its key files will be retained
+ on disk.
+
+(You do not have to specify all the items listed above in your policy
+definition. Any that are not set simply take the default value.)
+
+Usually, the exact timing of a key roll, or how long a signature remains
+valid, is not critical. For this reason, err on the side of caution when
+setting values for the parameters. It is better to have an operation
+like a key roll take a few days longer than absolutely required, than it
+is to have a quick key roll but have users get validation failures
+during the process.
+
+Having defined a new policy called "standard", we now need to tell
+:iscman:`named` to use it. We do this by adding a ``dnssec-policy standard;``
+statement to the configuration file. Like many other configuration
+statements, it can be placed in the :namedconf:ref:`options` statement (thus applying
+to all zones on the server), a :any:`view` statement (applying to all zones
+in the view), or a :any:`zone` statement (applying only to that zone). In
+this example, we'll add it to the :any:`zone` statement:
+
+::
+
+ zone "example.net" in {
+ ...
+ dnssec-policy standard;
+ inline-signing yes;
+ ...
+ };
+
+Finally, tell :iscman:`named` to use the new policy:
+
+::
+
+ # rndc reconfig
+
+... and that's it. :iscman:`named` now applies the "standard" policy to
+your zone.
+
+.. _signing_maintenance_tasks:
+
+Maintenance Tasks
+~~~~~~~~~~~~~~~~~
+
+Zone data is signed and the parent zone has published your DS records:
+at this point your zone is officially secure. When other
+validating resolvers look up information in your zone, they are able to
+follow the 12-step process as described in
+:ref:`how_does_dnssec_change_dns_lookup_revisited` and verify the
+authenticity and integrity of the answers.
+
+There is not that much left for you, as the DNS administrator, to do on
+an ongoing basis. Whenever you update your zone, BIND automatically
+re-signs your zone with new RRSIG and NSEC/NSEC3 records, and even
+increments the serial number for you. If you choose to split your keys
+into a KSK and ZSK, the rolling of the ZSK is completely automatic.
+Rolling of a KSK or CSK may require some manual intervention, though,
+so let's examine two more DNSSEC-related resource records, CDS and CDNSKEY.
+
+.. _cds_cdnskey:
+
+The CDS and CDNSKEY Resource Records
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Passing the DS record to the organization running the parent zone has
+always been recognized as a bottleneck in the key rollover process. To
+automate the process, the CDS and CDNSKEY resource records were
+introduced.
+
+The CDS and CDNSKEY records are identical to the DS and DNSKEY records,
+except in the type code and the name. When such a record appears in the
+child zone, it is a signal to the parent that it should update the DS it
+has for that zone. In essence, when the parent notices
+the presence of the CDS and/or CDNSKEY record(s) in the
+child zone, it checks these records to verify that they are
+signed by a valid key for the zone. If the record(s) successfully
+validate, the parent zone's DS RRset for the child zone is changed to
+correspond to the CDS (or CDNSKEY) records. (For more
+information on how the signaling works and the issues surrounding it,
+please refer to :rfc:`7344` and :rfc:`8078`.)
+
+.. _working_with_the_parent_2:
+
+Working with the Parent Zone (2)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Once the zone is signed, the only required manual tasks are
+to monitor KSK or CSK key rolls and pass the new DS record to the
+parent zone. However, if the parent can process CDS or CDNSKEY records,
+you may not even have to do that [#]_.
+
+When the time approaches for the roll of a KSK or CSK, BIND adds a
+CDS and a CDNSKEY record for the key in question to the apex of the
+zone. If your parent zone supports polling for CDS/CDNSKEY records, they
+are uploaded and the DS record published in the parent - at least ideally.
+
+If BIND is configured with :any:`parental-agents`, it will check for the DS
+presence. Let's look at the following configuration excerpt:
+
+::
+
+ parental-agents "net" {
+ 10.53.0.11; 10.53.0.12;
+ };
+
+ zone "example.net" in {
+ ...
+ dnssec-policy standard;
+ inline-signing yes;
+ parental-agents { "net"; };
+ ...
+ };
+
+BIND will check for the presence of the DS record in the parent zone by querying
+its parental agents (defined in :rfc:`7344` to be the entities that the child
+zone has a relationship with to change its delegation information). In the
+example above, The zone `example.net` is configured with two parental agents,
+at the addresses 10.53.0.11 and 10.53.0.12. These addresses are used as an
+example only. Both addresses will have to respond with a DS RRset that
+includes the DS record identifying the key that is being rolled. If one or
+both don't have the DS included yet the rollover is paused, and the check for
+DS presence is retried after an hour. The same applies for DS withdrawal.
+
+Alternatively, you can use the :iscman:`rndc` tool to tell :iscman:`named` that the DS
+record has been published or withdrawn. For example:
+
+::
+
+ # rndc dnssec -checkds published example.net
+
+If your parent zone doesn't support CDS/CDNSKEY, you will have to supply
+the DNSKEY or DS record to the parent zone manually when a new KSK appears in
+your zone, presumably using the same mechanism you used to upload the
+records for the first time. Again, you need to use the :iscman:`rndc` tool
+to tell :iscman:`named` that the DS record has been published.
+
+.. [#]
+ For security reasons, a parent zone that supports CDS/CDNSKEY may require
+ the DS record to be manually uploaded when we first sign the zone.
+ Until our zone is signed, the parent cannot be sure that a CDS or CDNSKEY
+ record it finds by querying our zone really comes from our zone; thus, it
+ needs to use some other form of secure transfer to obtain the information.
+
+.. _signing_alternative_ways:
+
+Alternate Ways of Signing a Zone
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Although use of the automatic :any:`dnssec-policy` is the preferred way to sign zones in
+BIND, there are occasions where a more manual approach may be
+needed, such as when external hardware is used to
+generate and sign the zone. :any:`dnssec-policy` does not currently support
+the use of external hardware, so if your security policy requires it, you
+need to use one of the methods described here.
+
+The idea of DNSSEC was first discussed in the 1990s and has been
+extensively developed over the intervening years. BIND has tracked the
+development of this technology, often being the first name server
+implementation to introduce new features. However, for compatibility reasons, BIND
+retained older ways of doing things even when new ways were added. This
+particularly applies to signing and maintaining zones, where different
+levels of automation are available.
+
+The following is a list of the available methods of signing in BIND, in the
+order that they were introduced - and in order of decreasing
+complexity.
+
+Manual
+ "Manual" signing was the first method to be introduced into BIND and
+ its name describes it perfectly: the user needs to do everything. In the
+ more-automated methods, you load an unsigned zone file into
+ :iscman:`named`, which takes care of signing it. With manual signing, you
+ have to provide a signed zone for :iscman:`named` to serve.
+
+ In practice, this means creating an unsigned zone file as usual, then
+ using the BIND-provided tools :iscman:`dnssec-keygen` to create the keys
+ and :iscman:`dnssec-signzone` to sign the zone. The signed zone is stored
+ in another file and is the one you tell BIND to load. To
+ update the zone (for example, to add a resource record), you update the
+ unsigned zone, re-sign it, and tell :iscman:`named` to load the updated
+ signed copy. The same goes for refreshing signatures or rolling keys;
+ the user is responsible for providing the signed zone served by
+ :iscman:`named`. (In the case of rolling keys, you are also responsible for
+ ensuring that the keys are added and removed at the correct times.)
+
+ Why would you want to sign your zone this way? You probably
+ wouldn't in the normal course of events, but as there may be
+ circumstances in which it is required, the scripts have been left in
+ the BIND distribution.
+
+Semi-Automatic
+ The first step in DNSSEC automation came with BIND 9.7, when the
+ :any:`auto-dnssec` option was added. This causes :iscman:`named` to
+ periodically search the directory holding the key files (see
+ :ref:`generate_keys` for a description) and to
+ use the information in them to both add and remove keys and sign the
+ zone.
+
+ Use of :any:`auto-dnssec` alone requires that the zone be dynamic,
+ something not suitable for a number of situations, so BIND 9.9 added the
+ :any:`inline-signing` option. With this, :iscman:`named` essentially keeps the
+ signed and unsigned copies of the zone separate. The signed zone is
+ created from the unsigned one using the key information; when the
+ unsigned zone is updated and the zone reloaded, :iscman:`named` detects the
+ changes and updates the signed copy of the zone.
+
+ This mode of signing has been termed "semi-automatic" in this
+ document because keys still have to be manually created (and deleted
+ when appropriate). Although not an onerous task, it is still
+ additional work.
+
+ Why would anyone want to use this
+ method when fully automated ones are available? At the time of
+ this writing (mid-2020), the fully automatic methods cannot handle all scenarios,
+ particularly that of having a single key shared among multiple
+ zones. They also do not handle keys stored in Hardware Security
+ Modules (HSMs), which are briefly covered in
+ :ref:`hardware_security_modules`.
+
+Fully Automatic with ``dnssec-keymgr``
+ The next step in the automation of DNSSEC operations came with BIND
+ 9.11, which introduced the ``dnssec-keymgr`` utility. This is a
+ separate program and was expected to be run on a regular basis
+ (probably via ``cron``). It read a DNSSEC policy from its
+ configuration file and read timing information from the DNSSEC key
+ files. With this information it created new key files with timing
+ information in them consistent with the policy. :iscman:`named` was run as
+ usual, picking up the timing information in the key files to
+ determine when to add and remove keys, and when to sign with them.
+
+ In BIND 9.17.0 and later, this method of handling DNSSEC
+ policies has been replaced by the :any:`dnssec-policy` statement in the
+ configuration file.
+
+Fully Automatic with :any:`dnssec-policy`
+ Introduced a BIND 9.16, :any:`dnssec-policy` replaces ``dnssec-keymgr`` from BIND
+ 9.17 onwards and avoids the need to run a separate program. It also
+ handles the creation of keys if a zone is added (``dnssec-keymgr``
+ requires an initial key) and deletes old key files as they are
+ removed from the zone. This is the method described in
+ :ref:`easy_start_guide_for_authoritative_servers`.
+
+We now look at some of these methods in more detail. We cover
+semi-automatic signing first, as that contains a lot of useful
+information about keys and key timings. After that, we
+touch on fully automatic signing with :any:`dnssec-policy`. Since this has
+already been described in
+:ref:`easy_start_guide_for_authoritative_servers`, we will just
+mention a few additional points. Finally, we briefly describe manual signing.
+
+.. _semi_automatic_signing:
+
+Semi-Automatic Signing
+^^^^^^^^^^^^^^^^^^^^^^
+
+As noted above, the term semi-automatic signing has been used in this
+document to indicate the mode of signing enabled by the :any:`auto-dnssec`
+and :any:`inline-signing` keywords. :iscman:`named` signs the zone without any
+manual intervention, based purely on the timing information in the
+DNSSEC key files. The files, however, must be created manually.
+
+By appropriately setting the key parameters and the timing information
+in the key files, you can implement any DNSSEC policy you want for your
+zones. But why manipulate the key information yourself rather than rely
+on :any:`dnssec-policy` to do it for you? The answer
+is that semi-automatic signing allows you to do things that, at the time of this writing
+(mid-2020), are currently not possible with one of the key managers: for
+example, the ability to use an HSM to store keys, or the ability to use
+the same key for multiple zones.
+
+To convert a traditional
+(insecure) DNS zone to a secure one, we need to create various
+additional records (DNSKEY, RRSIG, NSEC/NSEC3) and, as with
+fully automatic signing, to upload verifiable information (such as a DS
+record) to the parent zone to complete the chain of trust.
+
+.. note::
+
+ Again, we assume all configuration files, key
+ files, and zone files are stored in ``/etc/bind``, and most examples
+ show commands run
+ as the root user. This may not be ideal, but the point is not
+ to distract from what is important here: learning how to sign
+ a zone. There are many best practices for deploying a more secure
+ BIND installation, with techniques such as jailed process and
+ restricted user privileges, but those are not covered
+ in this document. We trust you, a responsible DNS
+ administrator, to take the necessary precautions to secure your
+ system.
+
+ For our examples below, we work with the assumption that
+ there is an existing insecure zone ``example.com`` that we are
+ converting to a secure version. The secure version uses both a KSK
+ and a ZSK.
+
+.. _generate_keys:
+
+Generate Keys
++++++++++++++
+
+Everything in DNSSEC centers around keys, so we begin by
+generating our own keys.
+
+.. code-block:: console
+
+ # cd /etc/bind/keys
+ # dnssec-keygen -a ECDSAP256SHA256 example.com
+ Generating key pair...........................+++++ ......................+++++
+ Kexample.com.+013+34371
+ # dnssec-keygen -a ECDSAP256SHA256 -f KSK example.com
+ Generating key pair........................+++ ..................................+++
+ Kexample.com.+013+00472
+
+This command generates four key files in ``/etc/bind/keys``:
+
+- Kexample.com.+013+34371.key
+
+- Kexample.com.+013+34371.private
+
+- Kexample.com.+013+00472.key
+
+- Kexample.com.+013+00472.private
+
+The two files ending in ``.key`` are the public keys. These contain the
+DNSKEY resource records that appear in the zone. The two files
+ending in ``.private`` are the private keys, and contain the information
+that :iscman:`named` actually uses to sign the zone.
+
+Of the two pairs, one is the zone-signing key (ZSK), and one is the
+key-signing key (KSK). We can tell which is which by looking at the file
+contents (the actual keys are shortened here for ease of display):
+
+.. code-block:: console
+
+ # cat Kexample.com.+013+34371.key
+ ; This is a zone-signing key, keyid 34371, for example.com.
+ ; Created: 20200616104249 (Tue Jun 16 11:42:49 2020)
+ ; Publish: 20200616104249 (Tue Jun 16 11:42:49 2020)
+ ; Activate: 20200616104249 (Tue Jun 16 11:42:49 2020)
+ example.com. IN DNSKEY 256 3 13 AwEAAfel66...LqkA7cvn8=
+ # cat Kexample.com.+013+00472.key
+ ; This is a key-signing key, keyid 472, for example.com.
+ ; Created: 20200616104254 (Tue Jun 16 11:42:54 2020)
+ ; Publish: 20200616104254 (Tue Jun 16 11:42:54 2020)
+ ; Activate: 20200616104254 (Tue Jun 16 11:42:54 2020)
+ example.com. IN DNSKEY 257 3 13 AwEAAbCR6U...l8xPjokVU=
+
+The first line of each file tells us what type of key it is. Also, by
+looking at the actual DNSKEY record, we can tell them apart: 256 is
+ZSK, and 257 is KSK.
+
+The name of the file also tells us something
+about the contents. See chapter :ref:`zone_keys` for more details.
+
+Make sure that these files are readable by :iscman:`named` and that the
+``.private`` files are not readable by anyone else.
+
+Alternativelly, the :iscman:`dnssec-keyfromlabel` program is used to get a key
+pair from a crypto hardware device and build the key files. Its usage is
+similar to :iscman:`dnssec-keygen`.
+
+Setting Key Timing Information
+++++++++++++++++++++++++++++++
+
+You may remember that in the above description of this method, we said
+that time information related to rolling keys is stored in the key
+files. This is placed there by :iscman:`dnssec-keygen` when the file is
+created, and it can be modified using :iscman:`dnssec-settime`. By default,
+only a limited amount of timing information is included in the file, as
+illustrated in the examples in the previous section.
+
+All the dates are the same, and are the date and time that
+:iscman:`dnssec-keygen` created the key. We can use :iscman:`dnssec-settime` to
+modify the dates [#]_. For example, to publish this key in
+the zone on 1 July 2020, use it to sign records for a year starting on
+15 July 2020, and remove it from the zone at the end of July 2021, we
+can use the following command:
+
+.. code-block:: console
+
+ # dnssec-settime -P 20200701 -A 20200715 -I 20210715 -D 20210731 Kexample.com.+013+34371.key
+ ./Kexample.com.+013+34371.key
+ ./Kexample.com.+013+34371.private
+
+which would set the contents of the key file to:
+
+.. code-block:: none
+
+ ; This is a zone-signing key, keyid 34371, for example.com.
+ ; Created: 20200616104249 (Tue Jun 16 11:42:49 2020)
+ ; Publish: 20200701000000 (Wed Jul 1 01:00:00 2020)
+ ; Activate: 20200715000000 (Wed Jul 15 01:00:00 2020)
+ ; Inactive: 20210715000000 (Thu Jul 15 01:00:00 2021)
+ ; Delete: 20210731000000 (Sat Jul 31 01:00:00 2021)
+ example.com. IN DNSKEY 256 3 13 AwEAAfel66...LqkA7cvn8=
+
+(The actual key is truncated here to improve readability.)
+
+Below is a complete list of each of the metadata fields, and how each
+one affects the signing of your zone:
+
+1. *Created*: This records the date on which the key was created. It is
+ not used in calculations; it is useful simply for documentation
+ purposes.
+
+2. *Publish*: This sets the date on which a key is to be published to the
+ zone. After that date, the key is included in the zone but is
+ not used to sign it. This allows validating resolvers to get a
+ copy of the new key in their cache before there are any resource
+ records signed with it. By default, if not specified at creation
+ time, this is set to the current time, meaning the key is
+ published as soon as :iscman:`named` picks it up.
+
+3. *Activate*: This sets the date on which the key is to be activated. After
+ that date, resource records are signed with the key. By default,
+ if not specified during creation time, this is set to the current
+ time, meaning the key is used to sign data as soon as :iscman:`named`
+ picks it up.
+
+4. *Revoke:* This sets the date on which the key is to be revoked. After that
+ date, the key is flagged as revoked, although it is still included in the
+ zone and used to sign it. This is used to notify validating
+ resolvers that this key is about to be removed or retired from the
+ zone. (This state is not used in normal day-to-day operations. See
+ :rfc:`5011` to understand the circumstances where it may be used.)
+
+5. *Inactive*: This sets the date on which the key is to become inactive.
+ After that date, the key is still included in the zone, but it
+ is no longer used to sign it. This sets the "expiration" or "retire"
+ date for a key.
+
+6. *Delete*: This sets the date on which the key is to be deleted. After that
+ date, the key is no longer included in the zone, but it
+ continues to exist on the file system or key repository.
+
+This can be summarized as follows:
+
+.. table:: Key Metadata Comparison
+
+ +----------+------------------+------------------+------------------+
+ | Metadata | Included in Zone | Used to Sign | Purpose |
+ | | File? | Data? | |
+ +==========+==================+==================+==================+
+ | Created | No | No | Recording of |
+ | | | | key creation |
+ +----------+------------------+------------------+------------------+
+ | Publish | Yes | No | Introduction of |
+ | | | | a key soon to be |
+ | | | | active |
+ +----------+------------------+------------------+------------------+
+ | Activate | Yes | Yes | Activation date |
+ | | | | for new key |
+ +----------+------------------+------------------+------------------+
+ | Revoke | Yes | Yes | Notification of |
+ | | | | a key soon to be |
+ | | | | retired |
+ +----------+------------------+------------------+------------------+
+ | Inactive | Yes | No | Inactivation or |
+ | | | | retirement of a |
+ | | | | key |
+ +----------+------------------+------------------+------------------+
+ | Delete | No | No | Deletion or |
+ | | | | removal of a key |
+ | | | | from a zone |
+ +----------+------------------+------------------+------------------+
+
+The publication date is the date the key is introduced into the zone.
+Sometime later it is activated and is used to sign resource records.
+After a specified period, BIND stops using it to sign records, and at some
+other specified later time it is removed from the zone.
+
+Finally, we should note that the :iscman:`dnssec-keygen` command supports the
+same set of switches so we could have set the dates
+when we created the key.
+
+.. _semi_automatic_signing_reconfigure_bind:
+
+Reconfiguring BIND
+++++++++++++++++++
+
+Having created the keys with the appropriate timing information, the
+next step is to turn on DNSSEC signing. Below is a very simple
+:iscman:`named.conf`; in our example environment, this file is
+``/etc/bind/named.conf``.
+
+::
+
+ options {
+ directory "/etc/bind";
+ recursion no;
+ minimal-responses yes;
+ };
+
+ zone "example.com" IN {
+ type primary;
+ file "example.com.db";
+ auto-dnssec maintain;
+ inline-signing yes;
+ };
+
+Once the configuration file is updated, tell :iscman:`named` to
+reload:
+
+::
+
+ # rndc reload
+ server reload successful
+
+.. _semi_automated_signing_verification:
+
+Verifying That the Zone Is Signed Correctly
++++++++++++++++++++++++++++++++++++++++++++
+
+You should now check that the zone is signed. Follow the steps in
+:ref:`signing_verification`.
+
+.. _semi_automatic_signing_upload_ds:
+
+Uploading the DS Record to the Parent
++++++++++++++++++++++++++++++++++++++
+
+As described in :ref:`signing_easy_start_upload_to_parent_zone`, we
+must now upload the new information to the parent zone. The format of the
+information and how to generate it is described in
+:ref:`working_with_parent_zone`, although it is important to remember that you must
+use the contents of the KSK file that you generated above as part of the
+process.
+
+When the DS record is published in the parent zone, your zone is fully
+signed.
+
+Checking That Your Zone Can Be Validated
+++++++++++++++++++++++++++++++++++++++++
+
+Finally, follow the steps in :ref:`how_to_test_authoritative_server`
+to confirm that a query recognizes the zone as properly signed and
+vouched for by the parent zone.
+
+So... What Now?
++++++++++++++++
+
+Once the zone is signed, it must be monitored as described
+in :ref:`signing_maintenance_tasks`. However,
+as the time approaches for a key roll, you must create the new key. Of
+course, it is possible to create keys for the next fifty
+years all at once and set the key times appropriately. Whether the
+increased risk in having the private key files for future keys available
+on disk offsets the overhead of having to remember to create a new key
+before a rollover depends on your organization's security policy.
+
+.. _advanced_discussions_automatic_dnssec-policy:
+
+Fully Automatic Signing With :any:`dnssec-policy`
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Since BIND 9.16, key management is fully integrated ingo :iscman:`named`.
+Managing the signing process and rolling of these keys has been described in
+:ref:`easy_start_guide_for_authoritative_servers` and is not
+repeated here. A few points are worth noting, though:
+
+- The :any:`dnssec-policy` statement in the :iscman:`named` configuration file
+ describes all aspects of the DNSSEC policy, including the signing.
+
+- The :any:`dnssec-policy` statement requires to zone to use dynamic DNS,
+ or that :any:`inline-signing` is enabled.
+
+.. _advanced_discussions_manual_key_management_and_signing:
+
+Manual Signing
+^^^^^^^^^^^^^^
+
+Manual signing of a zone was the first method of signing introduced into
+BIND and offers, as the name suggests, no automation. The user must
+handle everything: create the keys, sign the zone file with them, load
+the signed zone, periodically re-sign the zone, and manage key rolls,
+including interaction with the parent. A user certainly can do all this,
+but why not use one of the automated methods? Nevertheless, it may
+be useful for test purposes, so we cover it briefly here.
+
+BIND 9 ships with several tools that are used in
+this process, which are explained in more detail below. In all cases,
+the ``-h`` option prints a full list of parameters. Note that the DNSSEC
+tools require the keyset files to be in the working directory or the
+directory specified by the ``-d`` option.
+
+The first step is to create the keys as described in :ref:`generate_keys`.
+
+Then, edit the zone file to make sure the proper DNSKEY entries are included.
+The public keys should be inserted into the zone file by
+including the ``.key`` files using ``$INCLUDE`` statements.
+
+Finally, use the command :iscman:`dnssec-signzone`.
+Any ``keyset`` files corresponding to secure sub-zones should be
+present. The zone signer generates ``NSEC``, ``NSEC3``, and ``RRSIG``
+records for the zone, as well as ``DS`` for the child zones if
+:option:`-g <dnssec-signzone -g>` is specified. If
+:option:`-g <dnssec-signzone -g>` is not specified, then DS RRsets for the
+secure child zones need to be added manually.
+
+By default, all zone keys which have an available private key are used
+to generate signatures. The following command signs the zone, assuming
+it is in a file called ``zone.child.example``, using manually specified keys:
+
+.. code-block:: console
+
+ # cd /etc/bind/keys/example.com/
+ # dnssec-signzone -t -N INCREMENT -o example.com -f /etc/bind/db/example.com.signed.db \
+ /etc/bind/db/example.com.db Kexample.com.+013+17694.key Kexample.com.+013+06817.key
+ Verifying the zone using the following algorithms: ECDSAP256SHA256.
+ Zone fully signed:
+ Algorithm: ECDSAP256SHA256: KSKs: 1 active, 0 stand-by, 0 revoked
+ ZSKs: 1 active, 0 stand-by, 0 revoked
+ /etc/bind/db/example.com.signed.db
+ Signatures generated: 17
+ Signatures retained: 0
+ Signatures dropped: 0
+ Signatures successfully verified: 0
+ Signatures unsuccessfully verified: 0
+ Signing time in seconds: 0.046
+ Signatures per second: 364.634
+ Runtime in seconds: 0.055
+
+The :option:`-o <dnssec-signzone -o>` switch explicitly defines the domain name
+(``example.com`` in this case), while the :option:`-f <dnssec-signzone -f>`
+switch specifies the output file name. The second line has three parameters:
+the unsigned zone name (``/etc/bind/db/example.com.db``), the ZSK file name,
+and the KSK file name. This also generates a plain-text file
+``/etc/bind/db/example.com.signed.db``, which can be manually verified for correctness.
+
+:iscman:`dnssec-signzone` also produces keyset and dsset files. These are used
+to provide the parent zone administrators with the ``DNSKEY`` records (or their
+corresponding ``DS`` records) that are the secure entry point to the zone.
+
+Finally, :iscman:`named.conf` needs to be updated to load the signed version
+of the zone, which looks something like this:
+
+.. code-block:: none
+
+ zone "example.com" IN {
+ type primary;
+ file "db/example.com.signed.db";
+ };
+
+Once the :option:`rndc reconfig` command is issued, BIND serves a signed
+zone. The file ``dsset-example.com`` (created by :iscman:`dnssec-signzone`
+when it signed the ``example.com`` zone) contains the DS record for the
+zone's KSK. You will need to pass that to the administrator of the parent
+zone, to be placed in the zone.
+
+Since this is a manual process, you will need to re-sign periodically,
+as well as every time the zone
+data changes. You will also need to manually roll the keys by adding and
+removing DNSKEY records (and interacting with the parent) at the
+appropriate times.
+
+.. [#]
+ The dates can also be modified using an editor, but that is likely to
+ be more error-prone than using :iscman:`dnssec-settime`.
+
+.. [#]
+ Only one key file - for either a KSK or ZSK - is needed to signal the
+ presence of the zone. :iscman:`dnssec-keygen` creates files of both
+ types as needed.
diff --git a/doc/dnssec-guide/troubleshooting.rst b/doc/dnssec-guide/troubleshooting.rst
new file mode 100644
index 0000000..1201802
--- /dev/null
+++ b/doc/dnssec-guide/troubleshooting.rst
@@ -0,0 +1,589 @@
+.. Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+..
+.. SPDX-License-Identifier: MPL-2.0
+..
+.. This Source Code Form is subject to the terms of the Mozilla Public
+.. License, v. 2.0. If a copy of the MPL was not distributed with this
+.. file, you can obtain one at https://mozilla.org/MPL/2.0/.
+..
+.. See the COPYRIGHT file distributed with this work for additional
+.. information regarding copyright ownership.
+
+.. _dnssec_troubleshooting:
+
+Basic DNSSEC Troubleshooting
+----------------------------
+
+In this chapter, we cover some basic troubleshooting
+techniques, some common DNSSEC symptoms, and their causes and solutions. This
+is not a comprehensive "how to troubleshoot any DNS or DNSSEC problem"
+guide, because that could easily be an entire book by itself.
+
+.. _troubleshooting_query_path:
+
+Query Path
+~~~~~~~~~~
+
+The first step in troubleshooting DNS or DNSSEC should be to
+determine the query path. Whenever you are working with a DNS-related issue, it is
+always a good idea to determine the exact query path to identify the
+origin of the problem.
+
+End clients, such as laptop computers or mobile phones, are configured
+to talk to a recursive name server, and the recursive name server may in
+turn forward requests on to other recursive name servers before arriving at the
+authoritative name server. The giveaway is the presence of the
+Authoritative Answer (``aa``) flag in a query response: when present, we know we are talking
+to the authoritative server; when missing, we are talking to a recursive
+server. The example below shows an answer to a query for
+``www.example.com`` without the Authoritative Answer flag:
+
+::
+
+ $ dig @10.53.0.3 www.example.com A
+
+ ; <<>> DiG 9.16.0 <<>> @10.53.0.3 www.example.com a
+ ; (1 server found)
+ ;; global options: +cmd
+ ;; Got answer:
+ ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 62714
+ ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1
+
+ ;; OPT PSEUDOSECTION:
+ ; EDNS: version: 0, flags:; udp: 4096
+ ; COOKIE: c823fe302625db5b010000005e722b504d81bb01c2227259 (good)
+ ;; QUESTION SECTION:
+ ;www.example.com. IN A
+
+ ;; ANSWER SECTION:
+ www.example.com. 60 IN A 10.1.0.1
+
+ ;; Query time: 3 msec
+ ;; SERVER: 10.53.0.3#53(10.53.0.3)
+ ;; WHEN: Wed Mar 18 14:08:16 GMT 2020
+ ;; MSG SIZE rcvd: 88
+
+Not only do we not see the ``aa`` flag, we see an ``ra``
+flag, which indicates Recursion Available. This indicates that the
+server we are talking to (10.53.0.3 in this example) is a recursive name
+server: although we were able to get an answer for
+``www.example.com``, we know that the answer came from somewhere else.
+
+If we query the authoritative server directly, we get:
+
+::
+
+ $ dig @10.53.0.2 www.example.com A
+
+ ; <<>> DiG 9.16.0 <<>> @10.53.0.2 www.example.com a
+ ; (1 server found)
+ ;; global options: +cmd
+ ;; Got answer:
+ ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 39542
+ ;; flags: qr aa rd; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1
+ ;; WARNING: recursion requested but not available
+ ...
+
+The ``aa`` flag tells us that we are now talking to the
+authoritative name server for ``www.example.com``, and that this is not a
+cached answer it obtained from some other name server; it served this
+answer to us right from its own database. In fact,
+the Recursion Available (``ra``) flag is not present, which means this
+name server is not configured to perform recursion (at least not for
+this client), so it could not have queried another name server to get
+cached results.
+
+.. _troubleshooting_visible_symptoms:
+
+Visible DNSSEC Validation Symptoms
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+After determining the query path, it is necessary to
+determine whether the problem is actually related to DNSSEC
+validation. You can use the :option:`dig +cd` flag to disable
+validation, as described in
+:ref:`how_do_i_know_validation_problem`.
+
+When there is indeed a DNSSEC validation problem, the visible symptoms,
+unfortunately, are very limited. With DNSSEC validation enabled, if a
+DNS response is not fully validated, it results in a generic
+SERVFAIL message, as shown below when querying against a recursive name
+server at 192.168.1.7:
+
+::
+
+ $ dig @10.53.0.3 www.example.org. A
+
+ ; <<>> DiG 9.16.0 <<>> @10.53.0.3 www.example.org A
+ ; (1 server found)
+ ;; global options: +cmd
+ ;; Got answer:
+ ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 28947
+ ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 1
+
+ ;; OPT PSEUDOSECTION:
+ ; EDNS: version: 0, flags:; udp: 4096
+ ; COOKIE: d1301968aca086ad010000005e723a7113603c01916d136b (good)
+ ;; QUESTION SECTION:
+ ;www.example.org. IN A
+
+ ;; Query time: 3 msec
+ ;; SERVER: 10.53.0.3#53(10.53.0.3)
+ ;; WHEN: Wed Mar 18 15:12:49 GMT 2020
+ ;; MSG SIZE rcvd: 72
+
+With :iscman:`delv`, a "resolution failed" message is output instead:
+
+::
+
+ $ delv @10.53.0.3 www.example.org. A +rtrace
+ ;; fetch: www.example.org/A
+ ;; resolution failed: SERVFAIL
+
+BIND 9 logging features may be useful when trying to identify
+DNSSEC errors.
+
+.. _troubleshooting_logging:
+
+Basic Logging
+~~~~~~~~~~~~~
+
+DNSSEC validation error messages show up in :any:`syslog` as a
+query error by default. Here is an example of what it may look like:
+
+::
+
+ validating www.example.org/A: no valid signature found
+ RRSIG failed to verify resolving 'www.example.org/A/IN': 10.53.0.2#53
+
+Usually, this level of error logging is sufficient.
+Debug logging, described in
+:ref:`troubleshooting_logging_debug`, gives information on how
+to get more details about why DNSSEC validation may have
+failed.
+
+.. _troubleshooting_logging_debug:
+
+BIND DNSSEC Debug Logging
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+A word of caution: before you enable debug logging, be aware that this
+may dramatically increase the load on your name servers. Enabling debug
+logging is thus not recommended for production servers.
+
+With that said, sometimes it may become necessary to temporarily enable
+BIND debug logging to see more details of how and whether DNSSEC is
+validating. DNSSEC-related messages are not recorded in :any:`syslog` by default,
+even if query log is enabled; only DNSSEC errors show up in :any:`syslog`.
+
+The example below shows how to enable debug level 3 (to see full DNSSEC
+validation messages) in BIND 9 and have it sent to :any:`syslog`:
+
+::
+
+ logging {
+ channel dnssec_log {
+ syslog daemon;
+ severity debug 3;
+ print-category yes;
+ };
+ category dnssec { dnssec_log; };
+ };
+
+The example below shows how to log DNSSEC messages to their own file
+(here, ``/var/log/dnssec.log``):
+
+::
+
+ logging {
+ channel dnssec_log {
+ file "/var/log/dnssec.log";
+ severity debug 3;
+ };
+ category dnssec { dnssec_log; };
+ };
+
+After turning on debug logging and restarting BIND, a large
+number of log messages appear in
+:any:`syslog`. The example below shows the log messages as a result of
+successfully looking up and validating the domain name ``ftp.isc.org``.
+
+::
+
+ validating ./NS: starting
+ validating ./NS: attempting positive response validation
+ validating ./DNSKEY: starting
+ validating ./DNSKEY: attempting positive response validation
+ validating ./DNSKEY: verify rdataset (keyid=20326): success
+ validating ./DNSKEY: marking as secure (DS)
+ validating ./NS: in validator_callback_dnskey
+ validating ./NS: keyset with trust secure
+ validating ./NS: resuming validate
+ validating ./NS: verify rdataset (keyid=33853): success
+ validating ./NS: marking as secure, noqname proof not needed
+ validating ftp.isc.org/A: starting
+ validating ftp.isc.org/A: attempting positive response validation
+ validating isc.org/DNSKEY: starting
+ validating isc.org/DNSKEY: attempting positive response validation
+ validating isc.org/DS: starting
+ validating isc.org/DS: attempting positive response validation
+ validating org/DNSKEY: starting
+ validating org/DNSKEY: attempting positive response validation
+ validating org/DS: starting
+ validating org/DS: attempting positive response validation
+ validating org/DS: keyset with trust secure
+ validating org/DS: verify rdataset (keyid=33853): success
+ validating org/DS: marking as secure, noqname proof not needed
+ validating org/DNSKEY: in validator_callback_ds
+ validating org/DNSKEY: dsset with trust secure
+ validating org/DNSKEY: verify rdataset (keyid=9795): success
+ validating org/DNSKEY: marking as secure (DS)
+ validating isc.org/DS: in fetch_callback_dnskey
+ validating isc.org/DS: keyset with trust secure
+ validating isc.org/DS: resuming validate
+ validating isc.org/DS: verify rdataset (keyid=33209): success
+ validating isc.org/DS: marking as secure, noqname proof not needed
+ validating isc.org/DNSKEY: in validator_callback_ds
+ validating isc.org/DNSKEY: dsset with trust secure
+ validating isc.org/DNSKEY: verify rdataset (keyid=7250): success
+ validating isc.org/DNSKEY: marking as secure (DS)
+ validating ftp.isc.org/A: in fetch_callback_dnskey
+ validating ftp.isc.org/A: keyset with trust secure
+ validating ftp.isc.org/A: resuming validate
+ validating ftp.isc.org/A: verify rdataset (keyid=27566): success
+ validating ftp.isc.org/A: marking as secure, noqname proof not needed
+
+Note that these log messages indicate that the chain of trust has been
+established and ``ftp.isc.org`` has been successfully validated.
+
+If validation had failed, you would see log messages indicating errors.
+We cover some of the most validation problems in the next section.
+
+.. _troubleshooting_common_problems:
+
+Common Problems
+~~~~~~~~~~~~~~~
+
+.. _troubleshooting_security_lameness:
+
+Security Lameness
+^^^^^^^^^^^^^^^^^
+
+Similar to lame delegation in traditional DNS, security lameness refers to the
+condition when the parent zone holds a set of DS records that point to
+something that does not exist in the child zone. As a result,
+the entire child zone may "disappear," having been marked as bogus by
+validating resolvers.
+
+Below is an example attempting to resolve the A record for a test domain
+name ``www.example.net``. From the user's perspective, as described in
+:ref:`how_do_i_know_validation_problem`, only a SERVFAIL
+message is returned. On the validating resolver, we see the
+following messages in :any:`syslog`:
+
+::
+
+ named[126063]: validating example.net/DNSKEY: no valid signature found (DS)
+ named[126063]: no valid RRSIG resolving 'example.net/DNSKEY/IN': 10.53.0.2#53
+ named[126063]: broken trust chain resolving 'www.example.net/A/IN': 10.53.0.2#53
+
+This gives us a hint that it is a broken trust chain issue. Let's take a
+look at the DS records that are published for the zone (with the keys
+shortened for ease of display):
+
+::
+
+ $ dig @10.53.0.3 example.net. DS
+
+ ; <<>> DiG 9.16.0 <<>> @10.53.0.3 example.net DS
+ ; (1 server found)
+ ;; global options: +cmd
+ ;; Got answer:
+ ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 59602
+ ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 1
+
+ ;; OPT PSEUDOSECTION:
+ ; EDNS: version: 0, flags:; udp: 4096
+ ; COOKIE: 7026d8f7c6e77e2a010000005e735d7c9d038d061b2d24da (good)
+ ;; QUESTION SECTION:
+ ;example.net. IN DS
+
+ ;; ANSWER SECTION:
+ example.net. 256 IN DS 14956 8 2 9F3CACD...D3E3A396
+
+ ;; Query time: 0 msec
+ ;; SERVER: 10.53.0.3#53(10.53.0.3)
+ ;; WHEN: Thu Mar 19 11:54:36 GMT 2020
+ ;; MSG SIZE rcvd: 116
+
+Next, we query for the DNSKEY and RRSIG of ``example.net`` to see if
+there's anything wrong. Since we are having trouble validating, we
+can use the :option:`dig +cd` option to temporarily disable checking and return
+results, even though they do not pass the validation tests. The
+:option:`dig +multiline` option causes :iscman:`dig` to print the type, algorithm type,
+and key id for DNSKEY records. Again,
+some long strings are shortened for ease of display:
+
+::
+
+ $ dig @10.53.0.3 example.net. DNSKEY +dnssec +cd +multiline
+
+ ; <<>> DiG 9.16.0 <<>> @10.53.0.3 example.net DNSKEY +cd +multiline +dnssec
+ ; (1 server found)
+ ;; global options: +cmd
+ ;; Got answer:
+ ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 42980
+ ;; flags: qr rd ra cd; QUERY: 1, ANSWER: 4, AUTHORITY: 0, ADDITIONAL: 1
+
+ ;; OPT PSEUDOSECTION:
+ ; EDNS: version: 0, flags: do; udp: 4096
+ ; COOKIE: 4b5e7c88b3680c35010000005e73722057551f9f8be1990e (good)
+ ;; QUESTION SECTION:
+ ;example.net. IN DNSKEY
+
+ ;; ANSWER SECTION:
+ example.net. 287 IN DNSKEY 256 3 8 (
+ AwEAAbu3NX...ADU/D7xjFFDu+8WRIn
+ ) ; ZSK; alg = RSASHA256 ; key id = 35328
+ example.net. 287 IN DNSKEY 257 3 8 (
+ AwEAAbKtU1...PPP4aQZTybk75ZW+uL
+ 6OJMAF63NO0s1nAZM2EWAVasbnn/X+J4N2rLuhk=
+ ) ; KSK; alg = RSASHA256 ; key id = 27247
+ example.net. 287 IN RRSIG DNSKEY 8 2 300 (
+ 20811123173143 20180101000000 27247 example.net.
+ Fz1sjClIoF...YEjzpAWuAj9peQ== )
+ example.net. 287 IN RRSIG DNSKEY 8 2 300 (
+ 20811123173143 20180101000000 35328 example.net.
+ seKtUeJ4/l...YtDc1rcXTVlWIOw= )
+
+ ;; Query time: 0 msec
+ ;; SERVER: 10.53.0.3#53(10.53.0.3)
+ ;; WHEN: Thu Mar 19 13:22:40 GMT 2020
+ ;; MSG SIZE rcvd: 962
+
+Here is the problem: the parent zone is telling the world that
+``example.net`` is using the key 14956, but the authoritative server
+indicates that it is using keys 27247 and 35328. There are several
+potential causes for this mismatch: one possibility is that a malicious
+attacker has compromised one side and changed the data. A more likely
+scenario is that the DNS administrator for the child zone did not upload
+the correct key information to the parent zone.
+
+.. _troubleshooting_incorrect_time:
+
+Incorrect Time
+^^^^^^^^^^^^^^
+
+In DNSSEC, every record comes with at least one RRSIG, and each RRSIG
+contains two timestamps: one indicating when it becomes valid, and
+one when it expires. If the validating resolver's current system time does
+not fall within the two RRSIG timestamps, error messages
+appear in the BIND debug log.
+
+The example below shows a log message when the RRSIG appears to have
+expired. This could mean the validating resolver system time is
+incorrectly set too far in the future, or the zone administrator has not
+kept up with RRSIG maintenance.
+
+::
+
+ validating example.com/DNSKEY: verify failed due to bad signature (keyid=19036): RRSIG has expired
+
+The log below shows that the RRSIG validity period has not yet begun. This could mean
+the validation resolver's system time is incorrectly set too far in the past, or
+the zone administrator has incorrectly generated signatures for this
+domain name.
+
+::
+
+ validating example.com/DNSKEY: verify failed due to bad signature (keyid=4521): RRSIG validity period has not begun
+
+.. _troubleshooting_unable_to_load_keys:
+
+Unable to Load Keys
+^^^^^^^^^^^^^^^^^^^
+
+This is a simple yet common issue. If the key files are present but
+unreadable by :iscman:`named` for some reason, the :any:`syslog` returns clear error
+messages, as shown below:
+
+::
+
+ named[32447]: zone example.com/IN (signed): reconfiguring zone keys
+ named[32447]: dns_dnssec_findmatchingkeys: error reading key file Kexample.com.+008+06817.private: permission denied
+ named[32447]: dns_dnssec_findmatchingkeys: error reading key file Kexample.com.+008+17694.private: permission denied
+ named[32447]: zone example.com/IN (signed): next key event: 27-Nov-2014 20:04:36.521
+
+However, if no keys are found, the error is not as obvious. Below shows
+the :any:`syslog` messages after executing ``rndc
+reload`` with the key files missing from the key directory:
+
+::
+
+ named[32516]: received control channel command 'reload'
+ named[32516]: loading configuration from '/etc/bind/named.conf'
+ named[32516]: reading built-in trusted keys from file '/etc/bind/bind.keys'
+ named[32516]: using default UDP/IPv4 port range: [1024, 65535]
+ named[32516]: using default UDP/IPv6 port range: [1024, 65535]
+ named[32516]: sizing zone task pool based on 6 zones
+ named[32516]: the working directory is not writable
+ named[32516]: reloading configuration succeeded
+ named[32516]: reloading zones succeeded
+ named[32516]: all zones loaded
+ named[32516]: running
+ named[32516]: zone example.com/IN (signed): reconfiguring zone keys
+ named[32516]: zone example.com/IN (signed): next key event: 27-Nov-2014 20:07:09.292
+
+This happens to look exactly the same as if the keys were present and
+readable, and appears to indicate that :iscman:`named` loaded the keys and signed the zone. It
+even generates the internal (raw) files:
+
+::
+
+ # cd /etc/bind/db
+ # ls
+ example.com.db example.com.db.jbk example.com.db.signed
+
+If :iscman:`named` really loaded the keys and signed the zone, you should see
+the following files:
+
+::
+
+ # cd /etc/bind/db
+ # ls
+ example.com.db example.com.db.jbk example.com.db.signed example.com.db.signed.jnl
+
+So, unless you see the ``*.signed.jnl`` file, your zone has not been
+signed.
+
+.. _troubleshooting_invalid_trust_anchors:
+
+Invalid Trust Anchors
+^^^^^^^^^^^^^^^^^^^^^
+
+In most cases, you never need to explicitly configure trust
+anchors. :iscman:`named` supplies the current root trust anchor and,
+with the default setting of :any:`dnssec-validation`, updates it on the
+infrequent occasions when it is changed.
+
+However, in some circumstances you may need to explicitly configure
+your own trust anchor. As we saw in the :ref:`trust_anchors_description`
+section, whenever a DNSKEY is received by the validating resolver, it is
+compared to the list of keys the resolver explicitly trusts to see if
+further action is needed. If the two keys match, the validating resolver
+stops performing further verification and returns the answer(s) as
+validated.
+
+But what if the key file on the validating resolver is misconfigured or
+missing? Below we show some examples of log messages when things are not
+working properly.
+
+First of all, if the key you copied is malformed, BIND does not even
+start and you will likely find this error message in syslog:
+
+::
+
+ named[18235]: /etc/bind/named.conf.options:29: bad base64 encoding
+ named[18235]: loading configuration: failure
+
+If the key is a valid base64 string but the key algorithm is incorrect,
+or if the wrong key is installed, the first thing you will notice is
+that virtually all of your DNS lookups result in SERVFAIL, even when
+you are looking up domain names that have not been DNSSEC-enabled. Below
+shows an example of querying a recursive server 10.53.0.3:
+
+::
+
+ $ dig @10.53.0.3 www.example.com. A
+
+ ; <<>> DiG 9.16.0 <<>> @10.53.0.3 www.example.org A +dnssec
+ ; (1 server found)
+ ;; global options: +cmd
+ ;; Got answer:
+ ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 29586
+ ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 1
+
+ ;; OPT PSEUDOSECTION:
+ ; EDNS: version: 0, flags: do; udp: 4096
+ ; COOKIE: ee078fc321fa1367010000005e73a58bf5f205ca47e04bed (good)
+ ;; QUESTION SECTION:
+ ;www.example.org. IN A
+
+:iscman:`delv` shows a similar result:
+
+::
+
+ $ delv @192.168.1.7 www.example.com. +rtrace
+ ;; fetch: www.example.com/A
+ ;; resolution failed: SERVFAIL
+
+The next symptom you see is in the DNSSEC log messages:
+
+::
+
+ managed-keys-zone: DNSKEY set for zone '.' could not be verified with current keys
+ validating ./DNSKEY: starting
+ validating ./DNSKEY: attempting positive response validation
+ validating ./DNSKEY: no DNSKEY matching DS
+ validating ./DNSKEY: no DNSKEY matching DS
+ validating ./DNSKEY: no valid signature found (DS)
+
+These errors are indications that there are problems with the trust
+anchor.
+
+.. _troubleshooting_nta:
+
+Negative Trust Anchors
+~~~~~~~~~~~~~~~~~~~~~~
+
+BIND 9.11 introduced Negative Trust Anchors (NTAs) as a means to
+*temporarily* disable DNSSEC validation for a zone when you know that
+the zone's DNSSEC is misconfigured.
+
+NTAs are added using the :iscman:`rndc` command, e.g.:
+
+::
+
+ $ rndc nta example.com
+ Negative trust anchor added: example.com/_default, expires 19-Mar-2020 19:57:42.000
+
+
+The list of currently configured NTAs can also be examined using
+:iscman:`rndc`, e.g.:
+
+::
+
+ $ rndc nta -dump
+ example.com/_default: expiry 19-Mar-2020 19:57:42.000
+
+
+The default lifetime of an NTA is one hour, although by default, BIND
+polls the zone every five minutes to see if the zone correctly
+validates, at which point the NTA automatically expires. Both the
+default lifetime and the polling interval may be configured via
+:iscman:`named.conf`, and the lifetime can be overridden on a per-zone basis
+using the ``-lifetime duration`` parameter to ``rndc nta``. Both timer
+values have a permitted maximum value of one week.
+
+.. _troubleshooting_nsec3:
+
+NSEC3 Troubleshooting
+~~~~~~~~~~~~~~~~~~~~~
+
+BIND includes a tool called :iscman:`nsec3hash` that runs through the same
+steps as a validating resolver, to generate the correct hashed name
+based on NSEC3PARAM parameters. The command takes the following
+parameters in order: salt, algorithm, iterations, and domain. For
+example, if the salt is 1234567890ABCDEF, hash algorithm is 1, and
+iteration is 10, to get the NSEC3-hashed name for ``www.example.com`` we
+would execute a command like this:
+
+::
+
+ $ nsec3hash 1234567890ABCEDF 1 10 www.example.com
+ RN7I9ME6E1I6BDKIP91B9TCE4FHJ7LKF (salt=1234567890ABCEDF, hash=1, iterations=10)
+
+Zero-length salt can be specified as ``-``.
+
+While it is unlikely you would construct a rainbow table of your own
+zone data, this tool may be useful when troubleshooting NSEC3 problems.
diff --git a/doc/dnssec-guide/validation.rst b/doc/dnssec-guide/validation.rst
new file mode 100644
index 0000000..98696bb
--- /dev/null
+++ b/doc/dnssec-guide/validation.rst
@@ -0,0 +1,864 @@
+.. Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+..
+.. SPDX-License-Identifier: MPL-2.0
+..
+.. This Source Code Form is subject to the terms of the Mozilla Public
+.. License, v. 2.0. If a copy of the MPL was not distributed with this
+.. file, you can obtain one at https://mozilla.org/MPL/2.0/.
+..
+.. See the COPYRIGHT file distributed with this work for additional
+.. information regarding copyright ownership.
+
+.. _DNSSEC_validation:
+
+Validation
+----------
+
+.. _easy_start_guide_for_recursive_servers:
+
+Easy-Start Guide for Recursive Servers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This section provides the basic information needed to set up a
+working DNSSEC-aware recursive server, also known as a validating
+resolver. A validating resolver performs validation for each remote
+response received, following the chain of trust to verify that the answers it
+receives are legitimate, through the use of public key cryptography and
+hashing functions.
+
+.. _enabling_validation:
+
+Enabling DNSSEC Validation
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+So how do we turn on DNSSEC validation? It turns out that you may not need
+to reconfigure your name server at all, since the most recent versions of BIND 9 -
+including packages and distributions - have shipped with DNSSEC validation
+enabled by default. Before making any configuration changes, check
+whether you already have DNSSEC validation enabled by following the steps
+described in :ref:`how_to_test_recursive_server`.
+
+In earlier versions of BIND, including 9.11-ESV, DNSSEC
+validation must be explicitly enabled. To do this, you only need to
+add one line to the :namedconf:ref:`options` section of your configuration file:
+
+::
+
+ options {
+ ...
+ dnssec-validation auto;
+ ...
+ };
+
+Restart :iscman:`named` or run :option:`rndc reconfig`, and your recursive server is
+now happily validating each DNS response. If this does not work for you,
+you may have some other network-related configurations that need to be
+adjusted. Take a look at :ref:`network_requirements` to make sure your network
+is ready for DNSSEC.
+
+.. _effect_of_enabling_validation:
+
+Effects of Enabling DNSSEC Validation
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Once DNSSEC validation is enabled, any DNS response that does not pass
+the validation checks results in a failure to resolve the domain name
+(often a SERVFAIL status seen by the client). If everything has
+been configured properly, this is the correct result; it means that an end user has
+been protected against a malicious attack.
+
+However, if there is a DNSSEC configuration issue (sometimes outside of
+the administrator's control), a specific name or sometimes entire
+domains may "disappear" from the DNS, and become unreachable
+through that resolver. For the end user, the issue may manifest itself
+as name resolution being slow or failing altogether; some parts of a URL
+not loading; or the web browser returning an error message indicating
+that the page cannot be displayed. For example, if root name
+servers were misconfigured with the wrong information about ``.org``, it
+could cause all validation for ``.org`` domains to fail. To end
+users, it would appear that all ``.org`` web
+sites were out of service [#]_. Should you encounter DNSSEC-related problems, don't be
+tempted to disable validation; there is almost certainly a solution that
+leaves validation enabled. A basic troubleshooting guide can be found in
+:ref:`dnssec_troubleshooting`.
+
+.. [#]
+ Of course, something like this could happen for reasons other than
+ DNSSEC: for example, the root publishing the wrong addresses for the
+ ``.org`` nameservers.
+
+.. _how_to_test_recursive_server:
+
+So You Think You Are Validating (How To Test A Recursive Server)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Now that you have reconfigured your recursive server and
+restarted it, how do you know that your recursive name server is
+actually verifying each DNS query? There are several ways to check, and
+we've listed a few of them below.
+
+.. _using_web_based_tests_to_verify:
+
+Using Web-Based Tools to Verify
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+For most people, the simplest way to check if a recursive name server
+is indeed validating DNS queries is to use one of the many web-based
+tools available.
+
+Configure your client computer to use the newly reconfigured recursive
+server for DNS resolution; then use one of these web-based tests to
+confirm that it is in fact validating DNS responses.
+
+- `Internet.nl <https://en.conn.internet.nl/connection/>`__
+
+- `DNSSEC or Not (VeriSign) <https://www.dnssec-or-not.com/>`__
+
+.. _using_dig_to_verify:
+
+Using :iscman:`dig` to Verify
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Web-based DNSSEC-verification tools often employ JavaScript. If you don't trust the
+JavaScript magic that the web-based tools rely on, you can take matters
+into your own hands and use a command-line DNS tool to check your
+validating resolver yourself.
+
+While :iscman:`nslookup` is popular, partly because it comes pre-installed on
+most systems, it is not DNSSEC-aware. :iscman:`dig`, on the other hand, fully
+supports the DNSSEC standard and comes as a part of BIND. If you do not
+have :iscman:`dig` already installed on your system, install it by downloading
+it from ISC's `website <https://www.isc.org/download>`__. ISC provides pre-compiled
+Windows versions on its website.
+
+:iscman:`dig` is a flexible tool for interrogating DNS name servers. It
+performs DNS lookups and displays the answers that are returned from the
+name servers that were queried. Most seasoned DNS administrators use
+:iscman:`dig` to troubleshoot DNS problems because of its flexibility, ease of
+use, and clarity of output.
+
+The example below shows how to use :iscman:`dig` to query the name server 10.53.0.1
+for the A record for ``ftp.isc.org`` when DNSSEC validation is enabled
+(i.e. the default). The address 10.53.0.1 is only used as an example;
+replace it with the actual address or host name of your
+recursive name server.
+
+::
+
+ $ dig @10.53.0.1 ftp.isc.org. A +dnssec +multiline
+
+ ; <<>> DiG 9.16.0 <<>> @10.53.0.1 ftp.isc.org a +dnssec +multiline
+ ; (1 server found)
+ ;; global options: +cmd
+ ;; Got answer:
+ ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 48742
+ ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 1
+
+ ;; OPT PSEUDOSECTION:
+ ; EDNS: version: 0, flags: do; udp: 4096
+ ; COOKIE: 29a9705c2160b08c010000005e67a4a102b9ae079c1b24c8 (good)
+ ;; QUESTION SECTION:
+ ;ftp.isc.org. IN A
+
+ ;; ANSWER SECTION:
+ ftp.isc.org. 300 IN A 149.20.1.49
+ ftp.isc.org. 300 IN RRSIG A 13 3 300 (
+ 20200401191851 20200302184340 27566 isc.org.
+ e9Vkb6/6aHMQk/t23Im71ioiDUhB06sncsduoW9+Asl4
+ L3TZtpLvZ5+zudTJC2coI4D/D9AXte1cD6FV6iS6PQ== )
+
+ ;; Query time: 452 msec
+ ;; SERVER: 10.53.0.1#53(10.53.0.1)
+ ;; WHEN: Tue Mar 10 14:30:57 GMT 2020
+ ;; MSG SIZE rcvd: 187
+
+The important detail in this output is the presence of the ``ad`` flag
+in the header. This signifies that BIND has retrieved all related DNSSEC
+information related to the target of the query (``ftp.isc.org``) and that
+the answer received has passed the validation process described in
+:ref:`how_are_answers_verified`. We can have confidence in the
+authenticity and integrity of the answer, that ``ftp.isc.org`` really
+points to the IP address 149.20.1.49, and that it was not a spoofed answer
+from a clever attacker.
+
+Unlike earlier versions of BIND, the current versions of BIND always
+request DNSSEC records (by setting the ``do`` bit in the query they make
+to upstream servers), regardless of DNSSEC settings. However, with
+validation disabled, the returned signature is not checked. This can be
+seen by explicitly disabling DNSSEC validation. To do this, add the line
+``dnssec-validation no;`` to the "options" section of the configuration
+file, i.e.:
+
+::
+
+ options {
+ ...
+ dnssec-validation no;
+ ...
+ };
+
+If the server is restarted (to ensure a clean cache) and the same
+:iscman:`dig` command executed, the result is very similar:
+
+::
+
+ $ dig @10.53.0.1 ftp.isc.org. A +dnssec +multiline
+
+ ; <<>> DiG 9.16.0 <<>> @10.53.0.1 ftp.isc.org a +dnssec +multiline
+ ; (1 server found)
+ ;; global options: +cmd
+ ;; Got answer:
+ ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 39050
+ ;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 1
+
+ ;; OPT PSEUDOSECTION:
+ ; EDNS: version: 0, flags: do; udp: 4096
+ ; COOKIE: a8dc9d1b9ec45e75010000005e67a8a69399741fdbe126f2 (good)
+ ;; QUESTION SECTION:
+ ;ftp.isc.org. IN A
+
+ ;; ANSWER SECTION:
+ ftp.isc.org. 300 IN A 149.20.1.49
+ ftp.isc.org. 300 IN RRSIG A 13 3 300 (
+ 20200401191851 20200302184340 27566 isc.org.
+ e9Vkb6/6aHMQk/t23Im71ioiDUhB06sncsduoW9+Asl4
+ L3TZtpLvZ5+zudTJC2coI4D/D9AXte1cD6FV6iS6PQ== )
+
+ ;; Query time: 261 msec
+ ;; SERVER: 10.53.0.1#53(10.53.0.1)
+ ;; WHEN: Tue Mar 10 14:48:06 GMT 2020
+ ;; MSG SIZE rcvd: 187
+
+However, this time there is no ``ad`` flag in the header. Although
+:iscman:`dig` is still returning the DNSSEC-related resource records, it is
+not checking them, and thus cannot vouch for the authenticity of the answer.
+If you do carry out this test, remember to re-enable DNSSEC validation
+(by removing the ``dnssec-validation no;`` line from the configuration
+file) before continuing.
+
+.. _verifying_protection_from_bad_domains:
+
+Verifying Protection From Bad Domain Names
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+It is also important to make sure that DNSSEC is protecting your network from
+domain names that fail to validate; such failures could be caused by
+attacks on your system, attempting to get it to accept false DNS
+information. Validation could fail for a number of reasons: maybe the
+answer doesn't verify because it's a spoofed response; maybe the
+signature was a replayed network attack that has expired; or maybe the
+child zone has been compromised along with its keys, and the parent
+zone's information tells us that things don't add up. There is a
+domain name specifically set up to fail DNSSEC validation,
+``www.dnssec-failed.org``.
+
+With DNSSEC validation enabled (the default), an attempt to look up that
+name fails:
+
+::
+
+ $ dig @10.53.0.1 www.dnssec-failed.org. A
+
+ ; <<>> DiG 9.16.0 <<>> @10.53.0.1 www.dnssec-failed.org. A
+ ; (1 server found)
+ ;; global options: +cmd
+ ;; Got answer:
+ ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 22667
+ ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 1
+
+ ;; OPT PSEUDOSECTION:
+ ; EDNS: version: 0, flags:; udp: 4096
+ ; COOKIE: 69c3083144854587010000005e67bb57f5f90ff2688e455d (good)
+ ;; QUESTION SECTION:
+ ;www.dnssec-failed.org. IN A
+
+ ;; Query time: 2763 msec
+ ;; SERVER: 10.53.0.1#53(10.53.0.1)
+ ;; WHEN: Tue Mar 10 16:07:51 GMT 2020
+ ;; MSG SIZE rcvd: 78
+
+On the other hand, if DNSSEC validation is disabled (by adding the
+statement ``dnssec-validation no;`` to the :namedconf:ref:`options` clause in the
+configuration file), the lookup succeeds:
+
+::
+
+ $ dig @10.53.0.1 www.dnssec-failed.org. A
+
+ ; <<>> DiG 9.16.0 <<>> @10.53.0.1 www.dnssec-failed.org. A
+ ; (1 server found)
+ ;; global options: +cmd
+ ;; Got answer:
+ ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 54704
+ ;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 1
+
+ ;; OPT PSEUDOSECTION:
+ ; EDNS: version: 0, flags:; udp: 4096
+ ; COOKIE: 251eee58208917f9010000005e67bb6829f6dabc5ae6b7b9 (good)
+ ;; QUESTION SECTION:
+ ;www.dnssec-failed.org. IN A
+
+ ;; ANSWER SECTION:
+ www.dnssec-failed.org. 7200 IN A 68.87.109.242
+ www.dnssec-failed.org. 7200 IN A 69.252.193.191
+
+ ;; Query time: 439 msec
+ ;; SERVER: 10.53.0.1#53(10.53.0.1)
+ ;; WHEN: Tue Mar 10 16:08:08 GMT 2020
+ ;; MSG SIZE rcvd: 110
+
+Do not be tempted to disable DNSSEC validation just because some names
+are failing to resolve. Remember, DNSSEC protects your DNS lookup from
+hacking. The next section describes how to quickly check whether
+the failure to successfully look up a name is due to a validation
+failure.
+
+.. _how_do_i_know_validation_problem:
+
+How Do I Know I Have a Validation Problem?
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Since all DNSSEC validation failures result in a general ``SERVFAIL``
+message, how do we know if it was really a validation error?
+Fortunately, there is a flag in :iscman:`dig`, ("CD" for "checking
+disabled") which tells the server to disable DNSSEC validation. If
+you receive a ``SERVFAIL`` message, re-run the query a second time
+and set the :option:`dig +cd` flag. If the query succeeds with :option:`dig +cd`, but
+ends in ``SERVFAIL`` without it, you know you are dealing with a
+validation problem. So using the previous example of
+``www.dnssec-failed.org`` and with DNSSEC validation enabled in the
+resolver:
+
+::
+
+ $ dig @10.53.0.1 www.dnssec-failed.org A +cd
+
+ ; <<>> DiG 9.16.0 <<>> @10.53.0.1 www.dnssec-failed.org. A +cd
+ ; (1 server found)
+ ;; global options: +cmd
+ ;; Got answer:
+ ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 62313
+ ;; flags: qr rd ra cd; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 1
+
+ ;; OPT PSEUDOSECTION:
+ ; EDNS: version: 0, flags:; udp: 4096
+ ; COOKIE: 73ca1be3a74dd2cf010000005e67c8c8e6df64b519cd87fd (good)
+ ;; QUESTION SECTION:
+ ;www.dnssec-failed.org. IN A
+
+ ;; ANSWER SECTION:
+ www.dnssec-failed.org. 7197 IN A 68.87.109.242
+ www.dnssec-failed.org. 7197 IN A 69.252.193.191
+
+ ;; Query time: 0 msec
+ ;; SERVER: 10.53.0.1#53(10.53.0.1)
+ ;; WHEN: Tue Mar 10 17:05:12 GMT 2020
+ ;; MSG SIZE rcvd: 110
+
+For more information on troubleshooting, please see
+:ref:`dnssec_troubleshooting`.
+
+.. _validation_easy_start_explained:
+
+Validation Easy Start Explained
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+In :ref:`easy_start_guide_for_recursive_servers`, we used one line
+of configuration to turn on DNSSEC validation: the act of chasing down
+signatures and keys, making sure they are authentic. Now we are going to
+take a closer look at what DNSSEC validation actually does, and some other options.
+
+.. _dnssec_validation_explained:
+
+:any:`dnssec-validation`
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+::
+
+ options {
+ dnssec-validation auto;
+ };
+
+This “auto” line enables automatic DNSSEC trust anchor configuration
+using the :any:`managed-keys` feature. In this case, no manual key
+configuration is needed. There are three possible choices for the
+:any:`dnssec-validation` option:
+
+- *yes*: DNSSEC validation is enabled, but a trust anchor must be
+ manually configured. No validation actually takes place until
+ at least one trusted key has been manually configured.
+
+- *no*: DNSSEC validation is disabled, and the recursive server behaves
+ in the "old-fashioned" way of performing insecure DNS lookups.
+
+- *auto*: DNSSEC validation is enabled, and a default trust anchor
+ (included as part of BIND 9) for the DNS root zone is used. This is the
+ default; BIND automatically does this if there is no
+ :any:`dnssec-validation` line in the configuration file.
+
+Let's discuss the difference between *yes* and *auto*. If set to
+*yes*, the trust anchor must be manually defined and maintained
+using the :any:`trust-anchors` statement (with either the ``static-key`` or
+``static-ds`` modifier) in the configuration file; if set to
+*auto* (the default, and as shown in the example), then no further
+action should be required as BIND includes a copy [#]_ of the root key.
+When set to *auto*, BIND automatically keeps the keys (also known as
+trust anchors, discussed in :ref:`trust_anchors_description`)
+up-to-date without intervention from the DNS administrator.
+
+We recommend using the default *auto* unless there is a good reason to
+require a manual trust anchor. To learn more about trust anchors,
+please refer to :ref:`trusted_keys_and_managed_keys`.
+
+.. _how_does_dnssec_change_dns_lookup_revisited:
+
+How Does DNSSEC Change DNS Lookup (Revisited)?
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Now you've enabled validation on your recursive name server and
+verified that it works. What exactly changed? In
+:ref:`how_does_dnssec_change_dns_lookup` we looked at a very
+high-level, simplified version of the 12 steps of the DNSSEC validation process. Let's revisit
+that process now and see what your validating resolver is doing in more
+detail. Again, as an example we are looking up the A record for the
+domain name ``www.isc.org`` (see :ref:`dnssec_12_steps`):
+
+1. The validating resolver queries the ``isc.org`` name servers for the
+ A record of ``www.isc.org``. This query has the ``DNSSEC
+ OK`` (``do``) bit set to 1, notifying the remote authoritative
+ server that DNSSEC answers are desired.
+
+2. Since the zone ``isc.org`` is signed, and its name servers are
+ DNSSEC-aware, it responds with the answer to the A record query plus
+ the RRSIG for the A record.
+
+3. The validating resolver queries for the DNSKEY for ``isc.org``.
+
+4. The ``isc.org`` name server responds with the DNSKEY and RRSIG
+ records. The DNSKEY is used to verify the answers received in #2.
+
+5. The validating resolver queries the parent (``.org``) for the DS
+ record for ``isc.org``.
+
+6. The ``.org`` name server is also DNSSEC-aware, so it responds with the
+ DS and RRSIG records. The DS record is used to verify the answers
+ received in #4.
+
+7. The validating resolver queries for the DNSKEY for ``.org``.
+
+8. The ``.org`` name server responds with its DNSKEY and RRSIG. The DNSKEY
+ is used to verify the answers received in #6.
+
+9. The validating resolver queries the parent (root) for the DS record
+ for ``.org``.
+
+10. The root name server, being DNSSEC-aware, responds with DS and RRSIG
+ records. The DS record is used to verify the answers received in #8.
+
+11. The validating resolver queries for the DNSKEY for root.
+
+12. The root name server responds with its DNSKEY and RRSIG. The DNSKEY is
+ used to verify the answers received in #10.
+
+After step #12, the validating resolver takes the DNSKEY received and
+compares it to the key or keys it has configured, to decide whether
+the received key can be trusted. We talk about these locally
+configured keys, or trust anchors, in :ref:`trust_anchors_description`.
+
+With DNSSEC, every response includes not just the
+answer, but a digital signature (RRSIG) as well, so the
+validating resolver can verify the answer received. That is what we
+look at in the next section, :ref:`how_are_answers_verified`.
+
+.. _how_are_answers_verified:
+
+How Are Answers Verified?
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. note::
+
+ Keep in mind, as you read this section, that although words like
+ "encryption" and "decryption"
+ are used here from time to time, DNSSEC does not provide privacy.
+ Public key cryptography is used to verify data *authenticity* (who
+ sent it) and data *integrity* (it did not change during transit), but
+ any eavesdropper can still see DNS requests and responses in
+ clear text, even when DNSSEC is enabled.
+
+So how exactly are DNSSEC answers verified? Let's first see how verifiable information is
+generated. On the authoritative server, each DNS record (or message) is
+run through a hash function, and this hashed value is then encrypted by a
+private key. This encrypted hash value is the digital signature.
+
+.. figure:: ../dnssec-guide/img/signature-generation.png
+ :alt: Signature Generation
+ :width: 80.0%
+
+ Signature Generation
+
+When the validating resolver queries for the resource record, it
+receives both the plain-text message and the digital signature(s). The
+validating resolver knows the hash function used (it is listed in the digital
+signature record itself), so it can take the plain-text message and run
+it through the same hash function to produce a hashed value, which we'll call
+hash value X. The validating resolver can also obtain the public key
+(published as DNSKEY records), decrypt the digital signature, and get
+back the original hashed value produced by the authoritative server,
+which we'll call hash value Y. If hash values X and Y are identical, and
+the time is correct (more on what this means below), the answer is
+verified, meaning this answer came from the authoritative server
+(authenticity), and the content remained intact during transit
+(integrity).
+
+.. figure:: ../dnssec-guide/img/signature-verification.png
+ :alt: Signature Verification
+ :width: 80.0%
+
+ Signature Verification
+
+Take the A record ``ftp.isc.org``, for example. The plain text is:
+
+::
+
+ ftp.isc.org. 4 IN A 149.20.1.49
+
+The digital signature portion is:
+
+::
+
+ ftp.isc.org. 300 IN RRSIG A 13 3 300 (
+ 20200401191851 20200302184340 27566 isc.org.
+ e9Vkb6/6aHMQk/t23Im71ioiDUhB06sncsduoW9+Asl4
+ L3TZtpLvZ5+zudTJC2coI4D/D9AXte1cD6FV6iS6PQ== )
+
+When a validating resolver queries for the A record ``ftp.isc.org``, it
+receives both the A record and the RRSIG record. It runs the A record
+through a hash function (in this example, SHA256 as
+indicated by the number 13, signifying ECDSAP256SHA256) and produces
+hash value X. The resolver also fetches the appropriate DNSKEY record to
+decrypt the signature, and the result of the decryption is hash value Y.
+
+But wait, there's more! Just because X equals Y doesn't mean everything
+is good. We still have to look at the time. Remember we mentioned a
+little earlier that we need to check if the time is correct? Look
+at the two timestamps in our example above:
+
+- Signature Expiration: 20200401191851
+
+- Signature Inception: 20200302184340
+
+This tells us that this signature was generated UTC March 2nd, 2020, at
+6:43:40 PM (20200302184340), and it is good until UTC April 1st, 2020,
+7:18:51 PM (20200401191851). The validating resolver's current
+system time needs to fall between these two timestamps. If it does not, the
+validation fails, because it could be an attacker replaying an old
+captured answer set from the past, or feeding us a crafted one with
+incorrect future timestamps.
+
+If the answer passes both the hash value check and the timestamp check, it is
+validated and the authenticated data (``ad``) bit is set, and the response
+is sent to the client; if it does not verify, a SERVFAIL is returned to
+the client.
+
+.. [#]
+ BIND technically includes two copies of the root key: one is in
+ ``bind.keys.h`` and is built into the executable, and one is in
+ ``bind.keys`` as a :any:`trust-anchors` statement. The two copies of the
+ key are identical.
+
+.. _trust_anchors_description:
+
+Trust Anchors
+~~~~~~~~~~~~~
+
+A trust anchor is a key that is placed into a validating resolver, so
+that the validator can verify the results of a given request with a
+known or trusted public key (the trust anchor). A validating resolver
+must have at least one trust anchor installed to perform DNSSEC
+validation.
+
+.. _how_trust_anchors_are_used:
+
+How Trust Anchors are Used
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+In the section :ref:`how_does_dnssec_change_dns_lookup_revisited`,
+we walked through the 12 steps of the DNSSEC lookup process. At the end
+of the 12 steps, a critical comparison happens: the key received from
+the remote server and the key we have on file are compared to see if we
+trust it. The key we have on file is called a trust anchor, sometimes
+also known as a trust key, trust point, or secure entry point.
+
+The 12-step lookup process describes the DNSSEC lookup in the ideal
+world, where every single domain name is signed and properly delegated,
+and where each validating resolver only needs to have one trust anchor - that
+is, the root's public key. But there is no restriction that the
+validating resolver must only have one trust anchor. In fact, in the
+early stages of DNSSEC adoption, it was not unusual for a validating
+resolver to have more than one trust anchor.
+
+For instance, before the root zone was signed (in July 2010), some
+validating resolvers that wished to validate domain names in the ``.gov``
+zone needed to obtain and install the key for ``.gov``. A sample lookup
+process for ``www.fbi.gov`` at that time would have been eight steps rather
+than 12:
+
+.. figure:: ../dnssec-guide/img/dnssec-8-steps.png
+ :alt: DNSSEC Validation with ``.gov`` Trust Anchor
+
+
+1. The validating resolver queried ``fbi.gov`` name server for the A
+ record of ``www.fbi.gov``.
+
+2. The FBI's name server responded with the answer and its RRSIG.
+
+3. The validating resolver queried the FBI's name server for its DNSKEY.
+
+4. The FBI's name server responded with the DNSKEY and its RRSIG.
+
+5. The validating resolver queried a ``.gov`` name server for the DS
+ record of ``fbi.gov``.
+
+6. The ``.gov`` name server responded with the DS record and the
+ associated RRSIG for ``fbi.gov``.
+
+7. The validating resolver queried the ``.gov`` name server for its DNSKEY.
+
+8. The ``.gov`` name server responded with its DNSKEY and the associated
+ RRSIG.
+
+This all looks very similar, except it's shorter than the 12 steps that
+we saw earlier. Once the validating resolver receives the DNSKEY file in
+#8, it recognizes that this is the manually configured trusted key
+(trust anchor), and never goes to the root name servers to ask for the
+DS record for ``.gov``, or ask the root name servers for their DNSKEY.
+
+In fact, whenever the validating resolver receives a DNSKEY, it checks
+to see if this is a configured trusted key to decide whether it
+needs to continue chasing down the validation chain.
+
+.. _trusted_keys_and_managed_keys:
+
+Trusted Keys and Managed Keys
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Since the resolver is validating, we must have at least one key (trust
+anchor) configured. How did it get here, and how do we maintain it?
+
+If you followed the recommendation in
+:ref:`easy_start_guide_for_recursive_servers`, by setting
+:any:`dnssec-validation` to *auto*, there is nothing left to do.
+BIND already includes a copy of the root key (in the file
+``bind.keys``), and automatically updates it when the root key
+changes. [#]_ It looks something like this:
+
+::
+
+ trust-anchors {
+ # This key (20326) was published in the root zone in 2017.
+ . initial-key 257 3 8 "AwEAAaz/tAm8yTn4Mfeh5eyI96WSVexTBAvkMgJzkKTOiW1vkIbzxeF3
+ +/4RgWOq7HrxRixHlFlExOLAJr5emLvN7SWXgnLh4+B5xQlNVz8Og8kv
+ ArMtNROxVQuCaSnIDdD5LKyWbRd2n9WGe2R8PzgCmr3EgVLrjyBxWezF
+ 0jLHwVN8efS3rCj/EWgvIWgb9tarpVUDK/b58Da+sqqls3eNbuv7pr+e
+ oZG+SrDK6nWeL3c6H5Apxz7LjVc1uTIdsIXxuOLYA4/ilBmSVIzuDWfd
+ RUfhHdY6+cn8HFRm+2hM8AnXGXws9555KrUB5qihylGa8subX2Nn6UwN
+ R1AkUTV74bU=";
+ };
+
+You can, of course, decide to manage this key manually yourself.
+First, you need to make sure that :any:`dnssec-validation` is set
+to *yes* rather than *auto*:
+
+::
+
+ options {
+ dnssec-validation yes;
+ };
+
+Then, download the root key manually from a trustworthy source, such as
+`<https://www.isc.org/bind-keys>`__. Finally, take the root key you
+manually downloaded and put it into a :any:`trust-anchors` statement as
+shown below:
+
+::
+
+ trust-anchors {
+ # This key (20326) was published in the root zone in 2017.
+ . static-key 257 3 8 "AwEAAaz/tAm8yTn4Mfeh5eyI96WSVexTBAvkMgJzkKTOiW1vkIbzxeF3
+ +/4RgWOq7HrxRixHlFlExOLAJr5emLvN7SWXgnLh4+B5xQlNVz8Og8kv
+ ArMtNROxVQuCaSnIDdD5LKyWbRd2n9WGe2R8PzgCmr3EgVLrjyBxWezF
+ 0jLHwVN8efS3rCj/EWgvIWgb9tarpVUDK/b58Da+sqqls3eNbuv7pr+e
+ oZG+SrDK6nWeL3c6H5Apxz7LjVc1uTIdsIXxuOLYA4/ilBmSVIzuDWfd
+ RUfhHdY6+cn8HFRm+2hM8AnXGXws9555KrUB5qihylGa8subX2Nn6UwN
+ R1AkUTV74bU=";
+ };
+
+While this :any:`trust-anchors` statement and the one in the ``bind.keys``
+file appear similar, the definition of the key in ``bind.keys`` has the
+``initial-key`` modifier, whereas in the statement in the configuration
+file, that is replaced by ``static-key``. There is an important
+difference between the two: a key defined with ``static-key`` is always
+trusted until it is deleted from the configuration file. With the
+``initial-key`` modified, keys are only trusted once: for as long as it
+takes to load the managed key database and start the key maintenance
+process. Thereafter, BIND uses the managed keys database
+(``managed-keys.bind.jnl``) as the source of key information.
+
+.. warning::
+
+ Remember, if you choose to manage the keys on your own, whenever the
+ key changes (which, for most zones, happens on a periodic basis),
+ the configuration needs to be updated manually. Failure to do so will
+ result in breaking nearly all DNS queries for the subdomain of the
+ key. So if you are manually managing ``.gov``, all domain names in
+ the ``.gov`` space may become unresolvable; if you are manually
+ managing the root key, you could break all DNS requests made to your
+ recursive name server.
+
+Explicit management of keys was common in the early days of DNSSEC, when
+neither the root zone nor many top-level domains were signed. Since
+then, `over 90% <https://stats.research.icann.org/dns/tld_report/>`__ of
+the top-level domains have been signed, including all the largest ones.
+Unless you have a particular need to manage keys yourself, it is best to
+use the BIND defaults and let the software manage the root key.
+
+.. [#]
+ The root zone was signed in July 2010 and, as at the time of this writing
+ (mid-2020), the key has been changed once, in October 2018. The intention going
+ forward is to roll the key once every five years.
+
+.. _whats_edns0_all_about:
+
+What's EDNS All About (And Why Should I Care)?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. _whats-edns0-all-about-overview:
+
+EDNS Overview
+^^^^^^^^^^^^^
+
+Traditional DNS responses are typically small in size (less than 512
+bytes) and fit nicely into a small UDP packet. The Extension mechanism
+for DNS (EDNS, or EDNS(0)) offers a mechanism to send DNS data in
+larger packets over UDP. To support EDNS, both the DNS server
+and the network need to be properly prepared to support the larger
+packet sizes and multiple fragments.
+
+This is important for DNSSEC, since the :option:`dig +do` bit that signals
+DNSSEC-awareness is carried within EDNS, and DNSSEC responses are larger
+than traditional DNS ones. If DNS servers and the network environment cannot
+support large UDP packets, it will cause retransmission over TCP, or the
+larger UDP responses will be discarded. Users will likely experience
+slow DNS resolution or be unable to resolve certain names at all.
+
+Note that EDNS applies regardless of whether you are validating DNSSEC, because
+BIND has DNSSEC enabled by default.
+
+Please see :ref:`network_requirements` for more information on what
+DNSSEC expects from the network environment.
+
+.. _edns_on_dns_servers:
+
+EDNS on DNS Servers
+^^^^^^^^^^^^^^^^^^^
+
+For many years, BIND has had EDNS enabled by default,
+and the UDP packet size is set to a maximum of 4096 bytes. The DNS
+administrator should not need to perform any reconfiguration. You can
+use :iscman:`dig` to verify that your server supports EDNS and see the UDP packet
+size it allows with this :iscman:`dig` command:
+
+::
+
+ $ dig @10.53.0.1 www.isc.org. A +dnssec +multiline
+
+ ; <<>> DiG 9.16.0 <<>> @10.53.0.1 ftp.isc.org a +dnssec +multiline
+ ; (1 server found)
+ ;; global options: +cmd
+ ;; Got answer:
+ ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 48742
+ ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 1
+
+ ;; OPT PSEUDOSECTION:
+ ; EDNS: version: 0, flags: do; udp: 4096
+ ; COOKIE: 29a9705c2160b08c010000005e67a4a102b9ae079c1b24c8 (good)
+ ;; QUESTION SECTION:
+ ;ftp.isc.org. IN A
+
+ ;; ANSWER SECTION:
+ ftp.isc.org. 300 IN A 149.20.1.49
+ ftp.isc.org. 300 IN RRSIG A 13 3 300 (
+ 20200401191851 20200302184340 27566 isc.org.
+ e9Vkb6/6aHMQk/t23Im71ioiDUhB06sncsduoW9+Asl4
+ L3TZtpLvZ5+zudTJC2coI4D/D9AXte1cD6FV6iS6PQ== )
+
+ ;; Query time: 452 msec
+ ;; SERVER: 10.53.0.1#53(10.53.0.1)
+ ;; WHEN: Tue Mar 10 14:30:57 GMT 2020
+ ;; MSG SIZE rcvd: 187
+
+There is a helpful testing tool available (provided by DNS-OARC) that
+you can use to verify resolver behavior regarding EDNS support:
+`<https://www.dns-oarc.net/oarc/services/replysizetest/>`__ .
+
+Once you've verified that your name servers have EDNS enabled, that should be the
+end of the story, right? Unfortunately, EDNS is a hop-by-hop extension
+to DNS. This means the use of EDNS is negotiated between each pair of
+hosts in a DNS resolution process, which in turn means if one of your
+upstream name servers (for instance, your ISP's recursive name server
+that your name server forwards to) does not support EDNS, you may experience DNS
+lookup failures or be unable to perform DNSSEC validation.
+
+.. _support_for_large_packets_network_equipment:
+
+Support for Large Packets on Network Equipment
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+If both your recursive name server and your ISP's name servers
+support EDNS, we are all good here, right? Not so fast. Since these large
+packets have to traverse the network, the network infrastructure
+itself must allow them to pass.
+
+When data is physically transmitted over a network, it has to be broken
+down into chunks. The size of the data chunk is known as the Maximum
+Transmission Unit (MTU), and it can differ from network to
+network. IP fragmentation occurs when a large data packet needs to be
+broken down into chunks smaller than the
+MTU; these smaller chunks then need to be reassembled back into the large
+data packet at their destination. IP fragmentation is not necessarily a bad thing, and it most
+likely occurs on your network today.
+
+Some network equipment, such as a firewall, may make assumptions about
+DNS traffic. One of these assumptions may be how large each DNS packet
+is. When a firewall sees a larger DNS packet than it expects, it may either
+reject the large packet or drop its fragments because the firewall
+thinks it's an attack. This configuration probably didn't cause problems
+in the past, since traditional DNS packets are usually pretty small in
+size. However, with DNSSEC, these configurations need to be updated,
+since DNSSEC traffic regularly exceeds 1500 bytes (a common MTU value).
+If the configuration is not updated to support a larger DNS packet size,
+it often results in the larger packets being rejected, and to the
+end user it looks like the queries go unanswered. Or in the case of
+fragmentation, only a part of the answer makes it to the validating
+resolver, and your validating resolver may need to re-ask the question
+again and again, creating the appearance for end users that the DNS/network is slow.
+
+While you are updating the configuration on your network equipment, make
+sure TCP port 53 is also allowed for DNS traffic.
+
+.. _dns_uses_tcp:
+
+Wait... DNS Uses TCP?
+^^^^^^^^^^^^^^^^^^^^^
+
+Yes. DNS uses TCP port 53 as a fallback mechanism, when it cannot use
+UDP to transmit data. This has always been the case, even long before
+the arrival of DNSSEC. Traditional DNS relies on TCP port 53 for
+operations such as zone transfer. The use of DNSSEC, or DNS with IPv6
+records such as AAAA, increases the chance that DNS data will be
+transmitted via TCP.
+
+Due to the increased packet size, DNSSEC may fall back to TCP more often
+than traditional (insecure) DNS. If your network blocks or
+filters TCP port 53 today, you may already experience instability with
+DNS resolution, before even deploying DNSSEC.