From 3b9b6d0b8e7f798023c9d109c490449d528fde80 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 17:59:48 +0200 Subject: Adding upstream version 1:9.18.19. Signed-off-by: Daniel Baumann --- bin/tests/system/autosign/tests.sh | 1800 ++++++++++++++++++++++++++++++++++++ 1 file changed, 1800 insertions(+) create mode 100755 bin/tests/system/autosign/tests.sh (limited to 'bin/tests/system/autosign/tests.sh') diff --git a/bin/tests/system/autosign/tests.sh b/bin/tests/system/autosign/tests.sh new file mode 100755 index 0000000..ad23c22 --- /dev/null +++ b/bin/tests/system/autosign/tests.sh @@ -0,0 +1,1800 @@ +#!/bin/sh + +# Copyright (C) Internet Systems Consortium, Inc. ("ISC") +# +# SPDX-License-Identifier: MPL-2.0 +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, you can obtain one at https://mozilla.org/MPL/2.0/. +# +# See the COPYRIGHT file distributed with this work for additional +# information regarding copyright ownership. + +set -e + +. ../conf.sh + +status=0 +n=0 + +DIGOPTS="+tcp +noadd +nosea +nostat +nocmd +dnssec -p ${PORT}" +RNDCCMD="$RNDC -c ../common/rndc.conf -p ${CONTROLPORT} -s" + +# convert private-type records to readable form +# $1 is the zone +# $2 is the server +# $3 is ignored +# $4 is the alternate type +showprivate () { + echo "-- $@ --" + $DIG $DIGOPTS +nodnssec +short @$2 -t ${4:-type65534} $1 | cut -f3 -d' ' | + while read record; do + $PERL -e 'my $rdata = pack("H*", @ARGV[0]); + die "invalid record" unless length($rdata) == 5; + my ($alg, $key, $remove, $complete) = unpack("CnCC", $rdata); + my $action = "signing"; + $action = "removing" if $remove; + my $state = " (incomplete)"; + $state = " (complete)" if $complete; + print ("$action: alg: $alg, key: $key$state\n");' $record + done +} + +# check that signing records are marked as complete +# if $3 is 1 then we are expecting "(incomplete)" +# if $3 is 2 then we are not expecting either "(complete)" or "(incomplete)" +# if $4 is present then that specifies any alternate type to check +checkprivate () { + _ret=0 + expected="${3:-0}" + x=$(showprivate "$@") + echo $x | grep "(complete)" > /dev/null || _ret=2 + echo $x | grep "(incomplete)" > /dev/null && _ret=1 + + if [ $_ret = $expected ]; then + return 0 + fi + + echo "$x" + echo_i "failed" + return 1 +} + +# wait until notifies for zone $1 are sent by server $2. This is an indication +# that the zone is signed with the active keys, and the changes have been +# committed. +wait_for_notifies () { + wait_for_log 10 "zone ${1}/IN: sending notifies" "${2}/named.run" || return 1 +} + +freq() { + _file=$1 + # remove first and last line that has incomplete set and skews the distribution + awk '$4 == "RRSIG" {print substr($9,1,8)}' < "$_file" | sort | uniq -c | sed '1d;$d' +} +# Check the signatures expiration times. First check how many signatures +# there are in total ($rrsigs). Then see what the distribution of signature +# expiration times is ($expiretimes). Ignore the time part for a better +# modelled distribution. +checkjitter () { + _file=$1 + _ret=0 + + if ! command -v bc >/dev/null 2>&1; then + echo_i "skip: bc not available" + return 0 + fi + + freq "$_file" | cat_i + _expiretimes=$(freq "$_file" | awk '{print $1}') + + _count=0 + # Check if we have at least 4 days + # This number has been tuned for `sig-validity-interval 10 2`, as + # 1 signature expiration dates should be spread out across at most 8 (10-2) days + # 2. we remove first and last day to remove frequency outlier, we are left with 6 (8-2) days + # 3. we subtract two more days to allow test pass on day boundaries, etc. leaving us with 4 (6-2) + for _num in $_expiretimes + do + _count=$((_count+1)) + done + if [ "$_count" -lt 4 ]; then + echo_i "error: not enough categories" + return 1 + fi + + # Calculate mean + _total=0 + for _num in $_expiretimes + do + _total=$((_total+_num)) + done + _mean=$(($_total / $_count)) + + # Calculate stddev + _stddev=0 + for _num in $_expiretimes + do + _stddev=$(echo "$_stddev + (($_num - $_mean) * ($_num - $_mean))" | bc) + done + _stddev=$(echo "sqrt($_stddev/$_count)" | bc) + + # We expect the number of signatures not to exceed the mean +- 3 * stddev. + _limit=$((_stddev*3)) + _low=$((_mean-_limit)) + _high=$((_mean+_limit)) + # Find outliers. + echo_i "checking whether all frequencies fall into <$_low;$_high> range" + for _num in $_expiretimes + do + if [ $_num -gt $_high ]; then + echo_i "error: too many RRSIG records ($_num) in expiration bucket" + _ret=1 + fi + if [ $_num -lt $_low ]; then + echo_i "error: too few RRSIG records ($_num) in expiration bucket" + _ret=1 + fi + done + + return $_ret +} + +# +# The NSEC record at the apex of the zone and its RRSIG records are +# added as part of the last step in signing a zone. We wait for the +# NSEC records to appear before proceeding with a counter to prevent +# infinite loops if there is a error. +# +echo_i "waiting for autosign changes to take effect" +i=0 +while [ $i -lt 30 ] +do + ret=0 + # + # Wait for the root DNSKEY RRset to be fully signed. + # + $DIG $DIGOPTS . @10.53.0.1 dnskey > dig.out.ns1.test$n || ret=1 + grep "ANSWER: 10," dig.out.ns1.test$n > /dev/null || ret=1 + for z in . + do + $DIG $DIGOPTS $z @10.53.0.1 nsec > dig.out.ns1.test$n || ret=1 + grep "NS SOA" dig.out.ns1.test$n > /dev/null || ret=1 + done + for z in bar. example. private.secure.example. optout-with-ent. + do + $DIG $DIGOPTS $z @10.53.0.2 nsec > dig.out.ns2.test$n || ret=1 + grep "NS SOA" dig.out.ns2.test$n > /dev/null || ret=1 + done + for z in bar. example. inacksk2.example. inacksk3.example \ + inaczsk2.example. inaczsk3.example noksk.example nozsk.example + do + $DIG $DIGOPTS $z @10.53.0.3 nsec > dig.out.ns3.test$n || ret=1 + grep "NS SOA" dig.out.ns3.test$n > /dev/null || ret=1 + done + i=$((i + 1)) + if [ $ret = 0 ]; then break; fi + echo_i "waiting ... ($i)" + sleep 2 +done +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "done"; fi +status=$((status + ret)) + +echo_i "Convert optout-with-ent from nsec to nsec3" +($RNDCCMD 10.53.0.2 signing -nsec3param 1 1 1 - optout-with-ent 2>&1 | sed 's/^/ns2 /' | cat_i) || ret=1 + +echo_i "Initial counts of RRSIG expiry fields values for auto signed zones" +for z in . +do + echo_i zone $z + $DIG $DIGOPTS $z @10.53.0.1 axfr | awk '$4 == "RRSIG" {print $9}' | sort | uniq -c | cat_i +done +for z in bar. example. private.secure.example. +do + echo_i zone $z + $DIG $DIGOPTS $z @10.53.0.2 axfr | awk '$4 == "RRSIG" {print $9}' | sort | uniq -c | cat_i +done +for z in inacksk2.example. inacksk3.example inaczsk2.example. inaczsk3.example +do + echo_i zone $z + $DIG $DIGOPTS $z @10.53.0.3 axfr | awk '$4 == "RRSIG" {print $9}' | sort | uniq -c | cat_i +done + +# Set logfile offset for wait_for_log usage. +nextpartreset ns3/named.run + +# +# Check that DNSKEY is initially signed with a KSK and not a ZSK. +# +echo_i "check that zone with active and inactive KSK and active ZSK is properly" +echo_ic "resigned after the active KSK is deleted - stage 1: Verify that DNSKEY" +echo_ic "is initially signed with a KSK and not a ZSK. ($n)" +ret=0 + +$DIG $DIGOPTS @10.53.0.3 axfr inacksk3.example > dig.out.ns3.test$n + +zskid=$(awk '$4 == "DNSKEY" && $5 == 256 { print }' dig.out.ns3.test$n | + $DSFROMKEY -A -2 -f - inacksk3.example | awk '{ print $4}') +grep "DNSKEY ${DEFAULT_ALGORITHM_NUMBER} 2 " dig.out.ns3.test$n > /dev/null || ret=1 + +pattern="DNSKEY ${DEFAULT_ALGORITHM_NUMBER} 2 [0-9]* [0-9]* [0-9]* ${zskid} " +grep "${pattern}" dig.out.ns3.test$n > /dev/null && ret=1 + +count=$(awk 'BEGIN { count = 0 } + $4 == "RRSIG" && $5 == "DNSKEY" { count++ } + END {print count}' dig.out.ns3.test$n) +test $count -eq 1 || ret=1 + +count=$(awk 'BEGIN { count = 0 } + $4 == "DNSKEY" { count++ } + END {print count}' dig.out.ns3.test$n) +test $count -eq 3 || ret=1 + +awk='$4 == "RRSIG" && $5 == "DNSKEY" { printf "%05u\n", $11 }' +id=$(awk "${awk}" dig.out.ns3.test$n) + +keyfile=$(printf "ns3/Kinacksk3.example.+%03u+%s" "${DEFAULT_ALGORITHM_NUMBER}" "${id}") +$SETTIME -D now+5 "${keyfile}" > settime.out.test$n || ret=1 +($RNDCCMD 10.53.0.3 loadkeys inacksk3.example 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1 + +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +# +# Check that zone is initially signed with a ZSK and not a KSK. +# +echo_i "check that zone with active and inactive ZSK and active KSK is properly" +echo_ic "resigned after the active ZSK is deleted - stage 1: Verify that zone" +echo_ic "is initially signed with a ZSK and not a KSK. ($n)" +ret=0 +$DIG $DIGOPTS @10.53.0.3 axfr inaczsk3.example > dig.out.ns3.test$n +kskid=$(awk '$4 == "DNSKEY" && $5 == 257 { print }' dig.out.ns3.test$n | + $DSFROMKEY -2 -f - inaczsk3.example | awk '{ print $4}' ) +grep "CNAME ${DEFAULT_ALGORITHM_NUMBER} 3 " dig.out.ns3.test$n > /dev/null || ret=1 +grep "CNAME ${DEFAULT_ALGORITHM_NUMBER} 3 [0-9]* [0-9]* [0-9]* ${kskid} " dig.out.ns3.test$n > /dev/null && ret=1 +count=$(awk 'BEGIN { count = 0 } + $4 == "RRSIG" && $5 == "CNAME" { count++ } + END {print count}' dig.out.ns3.test$n) +test $count -eq 1 || ret=1 +count=$(awk 'BEGIN { count = 0 } + $4 == "DNSKEY" { count++ } + END {print count}' dig.out.ns3.test$n) +test $count -eq 3 || ret=1 +id=$(awk '$4 == "RRSIG" && $5 == "CNAME" { printf "%05u\n", $11 }' dig.out.ns3.test$n) + +keyfile=$(printf "ns3/Kinaczsk3.example.+%03u+%s" "${DEFAULT_ALGORITHM_NUMBER}" "${id}") +$SETTIME -D now+5 "${keyfile}" > settime.out.test$n || ret=1 +($RNDCCMD 10.53.0.3 loadkeys inaczsk3.example 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking NSEC->NSEC3 conversion prerequisites ($n)" +ret=0 +# these commands should result in an empty file: +$DIG $DIGOPTS +noall +answer nsec3.example. nsec3param @10.53.0.3 > dig.out.ns3.1.test$n || ret=1 +grep "NSEC3PARAM" dig.out.ns3.1.test$n > /dev/null && ret=1 +$DIG $DIGOPTS +noall +answer autonsec3.example. nsec3param @10.53.0.3 > dig.out.ns3.2.test$n || ret=1 +grep "NSEC3PARAM" dig.out.ns3.2.test$n > /dev/null && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking NSEC3->NSEC conversion prerequisites ($n)" +ret=0 +$DIG $DIGOPTS +noall +answer nsec3-to-nsec.example. nsec3param @10.53.0.3 > dig.out.ns3.test$n || ret=1 +grep "NSEC3PARAM" dig.out.ns3.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "converting zones from nsec to nsec3" +$NSUPDATE > /dev/null 2>&1 < nsupdate.out 2>&1 < dig.out.ns3.test$n || ret=1 +grep "NSEC3PARAM" dig.out.ns3.test$n > /dev/null && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking for nsec3param signing record ($n)" +ret=0 +$RNDCCMD 10.53.0.3 signing -list autonsec3.example. > signing.out.test$n 2>&1 +grep "Pending NSEC3 chain 1 0 20 DEAF" signing.out.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "resetting nsec3param via rndc signing ($n)" +ret=0 +$RNDCCMD 10.53.0.3 signing -clear all autonsec3.example. > /dev/null 2>&1 +$RNDCCMD 10.53.0.3 signing -nsec3param 1 1 10 beef autonsec3.example. > /dev/null 2>&1 +for i in 0 1 2 3 4 5 6 7 8 9; do + ret=0 + $RNDCCMD 10.53.0.3 signing -list autonsec3.example. > signing.out.test$n 2>&1 + grep "Pending NSEC3 chain 1 1 10 BEEF" signing.out.test$n > /dev/null || ret=1 + num=$(grep "Pending " signing.out.test$n | wc -l) + [ $num -eq 1 ] || ret=1 + [ $ret -eq 0 ] && break + echo_i "waiting ... ($i)" + sleep 2 +done +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "signing preset nsec3 zone" +zsk=$(cat autozsk.key) +ksk=$(cat autoksk.key) +$SETTIME -K ns3 -P now -A now $zsk > settime.out.test$n.zsk || ret=1 +$SETTIME -K ns3 -P now -A now $ksk > settime.out.test$n.ksk || ret=1 +($RNDCCMD 10.53.0.3 loadkeys autonsec3.example. 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1 + +echo_i "waiting for changes to take effect" +sleep 3 + +echo_i "converting zone from nsec3 to nsec" +$NSUPDATE > /dev/null 2>&1 << END || status=1 +server 10.53.0.3 ${PORT} +zone nsec3-to-nsec.example. +update delete nsec3-to-nsec.example. NSEC3PARAM +send +END + +echo_i "waiting for change to take effect" +sleep 3 + +missing=$(keyfile_to_key_id "$(cat noksk-ksk.key)") +echo_i "checking that expired RRSIGs from missing KSK $missing are not deleted ($n)" +ret=0 +$JOURNALPRINT ns3/noksk.example.db.jnl | \ + awk '{if ($1 == "del" && $5 == "RRSIG" && $12 == id) {error=1}} END {exit error}' id=$missing || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +missing=$(keyfile_to_key_id "$(cat nozsk-zsk.key)") +ksk=$(keyfile_to_key_id "$(cat nozsk-ksk.key)") +echo_i "checking that expired RRSIGs from missing ZSK $missing are replaced ($n)" +ret=0 +$JOURNALPRINT ns3/nozsk.example.db.jnl | \ + awk '{if ($1 == "del" && $5 == "RRSIG" && $12 == id) {ok=1}} END {exit ok?0:1}' id=$missing || ret=1 +$JOURNALPRINT ns3/nozsk.example.db.jnl | \ + awk '{if ($1 == "add" && $5 == "RRSIG" && $12 == id) {ok=1}} END {exit ok?0:1}' id=$ksk || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +inactive=$(keyfile_to_key_id "$(cat inaczsk-zsk.key)") +ksk=$(keyfile_to_key_id "$(cat inaczsk-ksk.key)") +echo_i "checking that expired RRSIGs from inactive ZSK $inactive are replaced ($n)" +ret=0 +$JOURNALPRINT ns3/inaczsk.example.db.jnl | \ + awk '{if ($1 == "del" && $5 == "RRSIG" && $12 == id) {ok=1}} END {exit ok?0:1}' id=$inactive || ret=1 +$JOURNALPRINT ns3/inaczsk.example.db.jnl | \ + awk '{if ($1 == "add" && $5 == "RRSIG" && $12 == id) {ok=1}} END {exit ok?0:1}' id=$ksk || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking that replaced RRSIGs are not logged (missing ZSK private key) ($n)" +ret=0 +loglines=$(grep "Key nozsk.example/$DEFAULT_ALGORITHM/$missing .* retaining signatures" ns3/named.run | wc -l) +[ "$loglines" -eq 0 ] || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking that replaced RRSIGs are not logged (inactive ZSK private key) ($n)" +ret=0 +loglines=$(grep "Key inaczsk.example/$DEFAULT_ALGORITHM/$inactive .* retaining signatures" ns3/named.run | wc -l) +[ "$loglines" -eq 0 ] || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +# Send rndc sync command to ns1, ns2 and ns3, to force the dynamically +# signed zones to be dumped to their zone files +echo_i "dumping zone files" +($RNDCCMD 10.53.0.1 sync 2>&1 | sed 's/^/ns1 /' | cat_i) || ret=1 +($RNDCCMD 10.53.0.2 sync 2>&1 | sed 's/^/ns2 /' | cat_i) || ret=1 +($RNDCCMD 10.53.0.3 sync 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1 + +now="$(TZ=UTC date +%Y%m%d%H%M%S)" +check_expiry() ( + $DIG $DIGOPTS AXFR oldsigs.example @10.53.0.3 > dig.out.test$n + nearest_expiration="$(awk '$4 == "RRSIG" { print $9 }' < dig.out.test$n | sort -n | head -1)" + if [ "$nearest_expiration" -le "$now" ]; then + echo_i "failed: $nearest_expiration <= $now" + return 1 + fi +) + +echo_i "checking expired signatures were updated ($n)" +retry 10 check_expiry || ret=1 +$DIG $DIGOPTS +noauth a.oldsigs.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.oldsigs.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +# Check jitter distribution. +echo_i "checking expired signatures were jittered correctly ($n)" +ret=0 +$DIG $DIGOPTS axfr oldsigs.example @10.53.0.3 > dig.out.ns3.test$n || ret=1 +checkjitter dig.out.ns3.test$n || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking NSEC->NSEC3 conversion succeeded ($n)" +ret=0 +$DIG $DIGOPTS nsec3.example. nsec3param @10.53.0.3 > dig.out.ns3.ok.test$n || ret=1 +grep "status: NOERROR" dig.out.ns3.ok.test$n > /dev/null || ret=1 +$DIG $DIGOPTS +noauth q.nsec3.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth q.nsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking direct NSEC3 autosigning succeeded ($n)" +ret=0 +$DIG $DIGOPTS +noall +answer autonsec3.example. nsec3param @10.53.0.3 > dig.out.ns3.ok.test$n || ret=1 +[ -s dig.out.ns3.ok.test$n ] || ret=1 +grep "NSEC3PARAM" dig.out.ns3.ok.test$n > /dev/null || ret=1 +$DIG $DIGOPTS +noauth q.autonsec3.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth q.autonsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking NSEC->NSEC3 conversion failed with NSEC-only key ($n)" +ret=0 +if $SHELL ../testcrypto.sh -q RSASHA1 +then + grep "failed: REFUSED" nsupdate.out > /dev/null || ret=1 +else + echo_i "skip: RSASHA1 not supported" +fi +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking NSEC3->NSEC conversion succeeded ($n)" +ret=0 +# this command should result in an empty file: +$DIG $DIGOPTS +noall +answer nsec3-to-nsec.example. nsec3param @10.53.0.3 > dig.out.ns3.nx.test$n || ret=1 +grep "NSEC3PARAM" dig.out.ns3.nx.test$n > /dev/null && ret=1 +$DIG $DIGOPTS +noauth q.nsec3-to-nsec.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth q.nsec3-to-nsec.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking NSEC3->NSEC conversion with 'rndc signing -nsec3param none' ($n)" +ret=0 +$RNDCCMD 10.53.0.3 signing -nsec3param none autonsec3.example. > /dev/null 2>&1 +# this command should result in an empty file: +no_nsec3param() ( + $DIG $DIGOPTS +noall +answer autonsec3.example. nsec3param @10.53.0.3 > dig.out.ns3.nx.test$n || return 1 + grep "NSEC3PARAM" dig.out.ns3.nx.test$n > /dev/null && return 1 + return 0 +) +retry_quiet 10 no_nsec3param || ret=1 +$DIG $DIGOPTS +noauth q.autonsec3.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth q.autonsec3.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking TTLs of imported DNSKEYs (no default) ($n)" +ret=0 +$DIG $DIGOPTS +tcp +noall +answer dnskey ttl1.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1 +[ -s dig.out.ns3.test$n ] || ret=1 +(awk 'BEGIN {r=0} $2 != 300 {r=1; print "found TTL " $2} END {exit r}' dig.out.ns3.test$n | cat_i) || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking TTLs of imported DNSKEYs (with default) ($n)" +ret=0 +$DIG $DIGOPTS +tcp +noall +answer dnskey ttl2.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1 +[ -s dig.out.ns3.test$n ] || ret=1 +(awk 'BEGIN {r=0} $2 != 60 {r=1; print "found TTL " $2} END {exit r}' dig.out.ns3.test$n | cat_i) || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking TTLs of imported DNSKEYs (mismatched) ($n)" +ret=0 +$DIG $DIGOPTS +tcp +noall +answer dnskey ttl3.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1 +[ -s dig.out.ns3.test$n ] || ret=1 +(awk 'BEGIN {r=0} $2 != 30 {r=1; print "found TTL " $2} END {exit r}' dig.out.ns3.test$n | cat_i) || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking TTLs of imported DNSKEYs (existing RRset) ($n)" +ret=0 +$DIG $DIGOPTS +tcp +noall +answer dnskey ttl4.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1 +[ -s dig.out.ns3.test$n ] || ret=1 +(awk 'BEGIN {r=0} $2 != 30 {r=1; print "found TTL " $2} END {exit r}' dig.out.ns3.test$n | cat_i) || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking positive validation NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth a.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking positive validation NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.nsec3.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.nsec3.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking positive validation OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.optout.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.optout.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking negative validation NXDOMAIN NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth q.example. @10.53.0.2 a > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth q.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking negative validation NXDOMAIN NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS +noauth q.nsec3.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth q.nsec3.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking negative validation NXDOMAIN OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS +noauth q.optout.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth q.optout.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking negative validation NODATA NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.example. @10.53.0.2 txt > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth a.example. @10.53.0.4 txt > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking negative validation NODATA NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.nsec3.example. \ + @10.53.0.3 txt > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.nsec3.example. \ + @10.53.0.4 txt > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking negative validation NODATA OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.optout.example. \ + @10.53.0.3 txt > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.optout.example. \ + @10.53.0.4 txt > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "ANSWER: 0" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +# Check the insecure.example domain + +echo_i "checking 1-server insecurity proof NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.insecure.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.insecure.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking 1-server negative insecurity proof NSEC ($n)" +ret=0 +$DIG $DIGOPTS q.insecure.example. a @10.53.0.3 \ + > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS q.insecure.example. a @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +# Check the secure.example domain + +echo_i "checking multi-stage positive validation NSEC/NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.secure.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.secure.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking multi-stage positive validation NSEC/NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.nsec3.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.nsec3.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking multi-stage positive validation NSEC/OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.optout.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.optout.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking multi-stage positive validation NSEC3/NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.secure.nsec3.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.secure.nsec3.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking multi-stage positive validation NSEC3/NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.nsec3.nsec3.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.nsec3.nsec3.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking multi-stage positive validation NSEC3/OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.optout.nsec3.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.optout.nsec3.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking multi-stage positive validation OPTOUT/NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.secure.optout.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.secure.optout.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking multi-stage positive validation OPTOUT/NSEC3 ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.nsec3.optout.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.nsec3.optout.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking multi-stage positive validation OPTOUT/OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.optout.optout.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.optout.optout.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking empty NODATA OPTOUT ($n)" +ret=0 +$DIG $DIGOPTS +noauth empty.optout.example. \ + @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth empty.optout.example. \ + @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +#grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +# Check the insecure.secure.example domain (insecurity proof) + +echo_i "checking 2-server insecurity proof ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.insecure.secure.example. @10.53.0.2 a \ + > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth a.insecure.secure.example. @10.53.0.4 a \ + > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +# Check a negative response in insecure.secure.example + +echo_i "checking 2-server insecurity proof with a negative answer ($n)" +ret=0 +$DIG $DIGOPTS q.insecure.secure.example. @10.53.0.2 a > dig.out.ns2.test$n \ + || ret=1 +$DIG $DIGOPTS q.insecure.secure.example. @10.53.0.4 a > dig.out.ns4.test$n \ + || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "status: NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking security root query ($n)" +ret=0 +$DIG $DIGOPTS . @10.53.0.4 key > dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking positive validation RSASHA256 NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.rsasha256.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.rsasha256.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking positive validation RSASHA512 NSEC ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.rsasha512.example. @10.53.0.3 a > dig.out.ns3.test$n || ret=1 +$DIG $DIGOPTS +noauth a.rsasha512.example. @10.53.0.4 a > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns3.test$n dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking that positive validation in a privately secure zone works ($n)" +ret=0 +$DIG $DIGOPTS +noauth a.private.secure.example. a @10.53.0.2 \ + > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth a.private.secure.example. a @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "NOERROR" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking that negative validation in a privately secure zone works ($n)" +ret=0 +$DIG $DIGOPTS +noauth q.private.secure.example. a @10.53.0.2 \ + > dig.out.ns2.test$n || ret=1 +$DIG $DIGOPTS +noauth q.private.secure.example. a @10.53.0.4 \ + > dig.out.ns4.test$n || ret=1 +digcomp dig.out.ns2.test$n dig.out.ns4.test$n || ret=1 +grep "NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +# Note - this is looking for failure, hence the && +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking privately secure to nxdomain works ($n)" +ret=0 +$DIG $DIGOPTS +noauth private2secure-nxdomain.private.secure.example. SOA @10.53.0.4 > dig.out.ns4.test$n || ret=1 +grep "NXDOMAIN" dig.out.ns4.test$n > /dev/null || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +# Try validating with a revoked trusted key. +# This should fail. + +echo_i "checking that validation returns insecure due to revoked trusted key ($n)" +ret=0 +$DIG $DIGOPTS example. soa @10.53.0.5 > dig.out.ns5.test$n || ret=1 +grep "flags:.*; QUERY" dig.out.ns5.test$n > /dev/null || ret=1 +grep "flags:.* ad.*; QUERY" dig.out.ns5.test$n > /dev/null && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking that revoked key is present ($n)" +ret=0 +id=$(cat rev.key) +$DIG $DIGOPTS +multi dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1 +grep '; key id = '"$id"'$' dig.out.ns1.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking that revoked key self-signs ($n)" +ret=0 +id=$(cat rev.key) +$DIG $DIGOPTS dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1 +grep 'RRSIG.*'" $id "'\. ' dig.out.ns1.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking for unpublished key ($n)" +ret=0 +id=$(keyfile_to_key_id "$(cat unpub.key)") +$DIG $DIGOPTS +multi dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1 +grep '; key id = '"$id"'$' dig.out.ns1.test$n > /dev/null && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking for activated but unpublished key ($n)" +ret=0 +id=$(keyfile_to_key_id "$(cat activate-now-publish-1day.key)") +$DIG $DIGOPTS +multi dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1 +grep '; key id = '"$id"'$' dig.out.ns1.test$n > /dev/null && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking that standby key does not sign records ($n)" +ret=0 +id=$(keyfile_to_key_id "$(cat standby.key)") +$DIG $DIGOPTS dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1 +grep 'RRSIG.*'" $id "'\. ' dig.out.ns1.test$n > /dev/null && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking that deactivated key does not sign records ($n)" +ret=0 +id=$(keyfile_to_key_id "$(cat inact.key)") +$DIG $DIGOPTS dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1 +grep 'RRSIG.*'" $id "'\. ' dig.out.ns1.test$n > /dev/null && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking insertion of public-only key ($n)" +ret=0 +id=$(keyfile_to_key_id "$(cat nopriv.key)") +file="ns1/$(cat nopriv.key).key" +keydata=$(grep DNSKEY $file) +$NSUPDATE > /dev/null 2>&1 < dig.out.ns1.test$n || ret=1 +grep 'RRSIG.*'" $id "'\. ' dig.out.ns1.test$n > /dev/null && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking key deletion ($n)" +ret=0 +id=$(keyfile_to_key_id "$(cat del.key)") +$DIG $DIGOPTS +multi dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1 +grep '; key id = '"$id"'$' dig.out.ns1.test$n > /dev/null && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking secure-to-insecure transition, nsupdate ($n)" +ret=0 +$NSUPDATE > /dev/null 2>&1 < dig.out.ns3.test$n || ret=1 + grep -E '(RRSIG|DNSKEY|NSEC)' dig.out.ns3.test$n > /dev/null && ret=1 + [ $ret -eq 0 ] && break + echo_i "waiting ... ($i)" + sleep 2 +done +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking secure-to-insecure transition, scheduled ($n)" +ret=0 +file="ns3/$(cat del1.key).key" +$SETTIME -I now -D now $file > settime.out.test$n.1 || ret=1 +file="ns3/$(cat del2.key).key" +$SETTIME -I now -D now $file > settime.out.test$n.2 || ret=1 +($RNDCCMD 10.53.0.3 sign secure-to-insecure2.example. 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1 +for i in 0 1 2 3 4 5 6 7 8 9; do + ret=0 + $DIG $DIGOPTS axfr secure-to-insecure2.example @10.53.0.3 > dig.out.ns3.test$n || ret=1 + grep -E '(RRSIG|DNSKEY|NSEC3)' dig.out.ns3.test$n > /dev/null && ret=1 + [ $ret -eq 0 ] && break + echo_i "waiting ... ($i)" + sleep 2 +done +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking jitter in a newly signed NSEC3 zone ($n)" +ret=0 +# Use DNS UPDATE to add an NSEC3PARAM record into the zone. +$NSUPDATE > nsupdate.out.test$n 2>&1 < /dev/null +# Trigger zone signing. +($RNDCCMD 10.53.0.3 sign jitter.nsec3.example. 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1 +# Wait until zone has been signed. +check_if_nsec3param_exists() { + $DIG $DIGOPTS NSEC3PARAM jitter.nsec3.example @10.53.0.3 > dig.out.ns3.1.test$n || return 1 + grep -q "^jitter\.nsec3\.example\..*NSEC3PARAM" dig.out.ns3.1.test$n || return 1 +} +retry_quiet 40 check_if_nsec3param_exists || { + echo_i "error: NSEC3PARAM not present yet" + ret=1 +} +$DIG $DIGOPTS AXFR jitter.nsec3.example @10.53.0.3 > dig.out.ns3.2.test$n || ret=1 +# Check jitter distribution. +checkjitter dig.out.ns3.2.test$n || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking that serial number and RRSIGs are both updated (rt21045) ($n)" +ret=0 +oldserial=$($DIG $DIGOPTS +short soa prepub.example @10.53.0.3 | awk '$0 !~ /SOA/ {print $3}') +oldinception=$($DIG $DIGOPTS +short soa prepub.example @10.53.0.3 | awk '/SOA/ {print $6}' | sort -u) + +$KEYGEN -a $DEFAULT_ALGORITHM -3 -q -K ns3 -P 0 -A +6d -I +38d -D +45d prepub.example > /dev/null + +($RNDCCMD 10.53.0.3 sign prepub.example 2>&1 | sed 's/^/ns1 /' | cat_i) || ret=1 +newserial=$oldserial +try=0 +while [ $oldserial -eq $newserial -a $try -lt 42 ] +do + newserial=$($DIG $DIGOPTS +short soa prepub.example @10.53.0.3 | + awk '$0 !~ /SOA/ {print $3}') + sleep 1 + try=$((try + 1)) +done +newinception=$($DIG $DIGOPTS +short soa prepub.example @10.53.0.3 | awk '/SOA/ {print $6}' | sort -u) +#echo "$oldserial : $newserial" +#echo "$oldinception : $newinception" + +[ "$oldserial" = "$newserial" ] && ret=1 +[ "$oldinception" = "$newinception" ] && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "preparing to test key change corner cases" +echo_i "removing a private key file" +file="ns1/$(cat vanishing.key).private" +rm -f $file + +echo_i "preparing ZSK roll" +starttime=$($PERL -e 'print time(), "\n";') +oldfile=$(cat active.key) +oldid=$(keyfile_to_key_id "$(cat active.key)") +newfile=$(cat standby.key) +newid=$(keyfile_to_key_id "$(cat standby.key)") +$SETTIME -K ns1 -I now+2s -D now+25 $oldfile > settime.out.test$n.1 || ret=1 +$SETTIME -K ns1 -i 0 -S $oldfile $newfile > settime.out.test$n.2 || ret=1 + +# note previous zone serial number +oldserial=$($DIG $DIGOPTS +short soa . @10.53.0.1 | awk '{print $3}') + +($RNDCCMD 10.53.0.1 loadkeys . 2>&1 | sed 's/^/ns1 /' | cat_i) || ret=1 +sleep 4 + +echo_i "revoking key to duplicated key ID" +$SETTIME -R now -K ns2 Kbar.+013+59973.key > settime.out.test$n.3 || ret=1 + +($RNDCCMD 10.53.0.2 loadkeys bar. 2>&1 | sed 's/^/ns2 /' | cat_i) || ret=1 + +echo_i "waiting for changes to take effect" +sleep 5 + +echo_i "checking former standby key $newid is now active ($n)" +ret=0 +$DIG $DIGOPTS dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1 +grep 'RRSIG.*'" $newid "'\. ' dig.out.ns1.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking former standby key has only signed incrementally ($n)" +ret=0 +$DIG $DIGOPTS txt . @10.53.0.1 > dig.out.ns1.test$n || ret=1 +grep 'RRSIG.*'" $newid "'\. ' dig.out.ns1.test$n > /dev/null && ret=1 +grep 'RRSIG.*'" $oldid "'\. ' dig.out.ns1.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking that signing records have been marked as complete ($n)" +ret=0 +checkprivate . 10.53.0.1 || ret=1 +checkprivate bar 10.53.0.2 || ret=1 +checkprivate example 10.53.0.2 0 type65280 || ret=1 # sig-signing-type 65280 +checkprivate private.secure.example 10.53.0.3 2 || ret=1 # pre-signed +checkprivate nsec3.example 10.53.0.3 || ret=1 +checkprivate nsec3.nsec3.example 10.53.0.3 || ret=1 +checkprivate nsec3.optout.example 10.53.0.3 || ret=1 +checkprivate nsec3-to-nsec.example 10.53.0.3 2 || ret=1 # automatically removed +if $SHELL ../testcrypto.sh -q RSASHA1 +then + checkprivate nsec-only.example 10.53.0.3 || ret=1 +fi +checkprivate oldsigs.example 10.53.0.3 2 || ret=1 # pre-signed +checkprivate optout.example 10.53.0.3 || ret=1 +checkprivate optout.nsec3.example 10.53.0.3 || ret=1 +checkprivate optout.optout.example 10.53.0.3 || ret=1 +checkprivate prepub.example 10.53.0.3 1 || ret=1 # expecting incomplete +checkprivate rsasha256.example 10.53.0.3 || ret=1 +checkprivate rsasha512.example 10.53.0.3 || ret=1 +checkprivate secure.example 10.53.0.3 || ret=1 +checkprivate secure.nsec3.example 10.53.0.3 || ret=1 +checkprivate secure.optout.example 10.53.0.3 || ret=1 +checkprivate secure-to-insecure2.example 10.53.0.3 2|| ret=1 # automatically removed +checkprivate secure-to-insecure.example 10.53.0.3 2 || ret=1 # automatically removed +checkprivate ttl1.example 10.53.0.3 || ret=1 +checkprivate ttl2.example 10.53.0.3 || ret=1 +checkprivate ttl3.example 10.53.0.3 || ret=1 +checkprivate ttl4.example 10.53.0.3 || ret=1 +n=$((n + 1)) +status=$((status + ret)) + +echo_i "forcing full sign" +($RNDCCMD 10.53.0.1 sign . 2>&1 | sed 's/^/ns1 /' | cat_i) || ret=1 + +echo_i "waiting for change to take effect" +sleep 5 + +echo_i "checking former standby key has now signed fully ($n)" +ret=0 +$DIG $DIGOPTS txt . @10.53.0.1 > dig.out.ns1.test$n || ret=1 +grep 'RRSIG.*'" $newid "'\. ' dig.out.ns1.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking SOA serial number has been incremented ($n)" +ret=0 +newserial=$($DIG $DIGOPTS +short soa . @10.53.0.1 | awk '{print $3}') +[ "$newserial" != "$oldserial" ] || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking delayed key publication/activation ($n)" +ret=0 +zsk=$(cat delayzsk.key) +ksk=$(cat delayksk.key) +# publication and activation times should be unset +$SETTIME -K ns3 -pA -pP $zsk > settime.out.test$n.zsk || ret=1 +grep -v UNSET settime.out.test$n.zsk >/dev/null && ret=1 +$SETTIME -K ns3 -pA -pP $ksk > settime.out.test$n.ksk || ret=1 +grep -v UNSET settime.out.test$n.ksk >/dev/null && ret=1 +$DIG $DIGOPTS +noall +answer dnskey delay.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1 +# DNSKEY not expected: +awk 'BEGIN {r=1} $4=="DNSKEY" {r=0} END {exit r}' dig.out.ns3.test$n && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking scheduled key publication, not activation ($n)" +ret=0 +# Ensure initial zone is loaded. +wait_for_notifies "delay.example" "ns3" || ret=1 +$SETTIME -K ns3 -P now+3s -A none $zsk > settime.out.test$n.zsk || ret=1 +$SETTIME -K ns3 -P now+3s -A none $ksk > settime.out.test$n.ksk || ret=1 +($RNDCCMD 10.53.0.3 loadkeys delay.example. 2>&1 | sed 's/^/ns2 /' | cat_i) || ret=1 +echo_i "waiting for changes to take effect" +sleep 3 +wait_for_notifies "delay.example" "ns3" || ret=1 + +$DIG $DIGOPTS +noall +answer dnskey delay.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1 +# DNSKEY expected: +awk 'BEGIN {r=1} $4=="DNSKEY" {r=0} END {exit r}' dig.out.ns3.test$n || ret=1 +# RRSIG not expected: +awk 'BEGIN {r=1} $4=="RRSIG" {r=0} END {exit r}' dig.out.ns3.test$n && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking scheduled key activation ($n)" +ret=0 +$SETTIME -K ns3 -A now+3s $zsk > settime.out.test$n.zsk || ret=1 +$SETTIME -K ns3 -A now+3s $ksk > settime.out.test$n.ksk || ret=1 +($RNDCCMD 10.53.0.3 loadkeys delay.example. 2>&1 | sed 's/^/ns2 /' | cat_i) || ret=1 +echo_i "waiting for changes to take effect" +sleep 3 +wait_for_log_re 10 "add delay\.example\..*NSEC.a\.delay\.example\. NS SOA RRSIG NSEC DNSKEY" ns3/named.run +check_is_signed() { + $DIG $DIGOPTS +noall +answer dnskey delay.example. @10.53.0.3 > dig.out.ns3.1.test$n || return 1 + # DNSKEY expected: + awk 'BEGIN {r=1} $4=="DNSKEY" {r=0} END {exit r}' dig.out.ns3.1.test$n || return 1 + # RRSIG expected: + awk 'BEGIN {r=1} $4=="RRSIG" {r=0} END {exit r}' dig.out.ns3.1.test$n || return 1 + $DIG $DIGOPTS +noall +answer a a.delay.example. @10.53.0.3 > dig.out.ns3.2.test$n || return 1 + # A expected: + awk 'BEGIN {r=1} $4=="A" {r=0} END {exit r}' dig.out.ns3.2.test$n || return 1 + # RRSIG expected: + awk 'BEGIN {r=1} $4=="RRSIG" {r=0} END {exit r}' dig.out.ns3.2.test$n || return 1 + return 0 +} +retry_quiet 5 check_is_signed || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking former active key was removed ($n)" +# +# Work out how long we need to sleep. Allow 4 seconds for the records +# to be removed. +# +now=$($PERL -e 'print time(), "\n";') +sleep=$((starttime + 29 - now)) +case $sleep in +-*|0);; +*) echo_i "waiting for timer to have activated"; sleep $sleep;; +esac +ret=0 +$DIG $DIGOPTS +multi dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1 +grep '; key id = '"$oldid"'$' dig.out.ns1.test$n > /dev/null && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking private key file removal caused no immediate harm ($n)" +ret=0 +id=$(keyfile_to_key_id "$(cat vanishing.key)") +$DIG $DIGOPTS dnskey . @10.53.0.1 > dig.out.ns1.test$n || ret=1 +grep 'RRSIG.*'" $id "'\. ' dig.out.ns1.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking revoked key with duplicate key ID ($n)" +ret=0 +id=59973 +rid=60101 +$DIG $DIGOPTS +multi dnskey bar @10.53.0.2 > dig.out.ns2.test$n || ret=1 +grep '; key id = '"$id"'$' dig.out.ns2.test$n > /dev/null && ret=1 +keys=$(grep '; key id = '"$rid"'$' dig.out.ns2.test$n | wc -l) +test $keys -eq 2 || ret=1 +$DIG $DIGOPTS dnskey bar @10.53.0.4 > dig.out.ns4.test$n || ret=1 +grep "flags:.*ad.*QUERY" dig.out.ns4.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking key event timers are always set ($n)" +ret=0 +# this is a regression test for a bug in which the next key event could +# be scheduled for the present moment, and then never fire. check for +# visible evidence of this error in the logs: +awk '/next key event/ {if ($1 == $8 && $2 == $9) exit 1}' */named.run || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +# this confirms that key events are never scheduled more than +# 'dnssec-loadkeys-interval' minutes in the future, and that the +# event scheduled is within 10 seconds of expected interval. +check_interval () { + awk '/next key event/ {print $2 ":" $9}' $1/named.run | + sed -e 's/\.//g' -e 's/:0\{1,4\}/:/g' | + awk -F: ' + { + x = ($6+ $5*60000 + $4*3600000) - ($3+ $2*60000 + $1*3600000); + # abs(x) < 1000 ms treat as 'now' + if (x < 1000 && x > -1000) + x = 0; + # convert to seconds + x = x/1000; + # handle end of day roll over + if (x < 0) + x = x + 24*3600; + # handle log timestamp being a few milliseconds later + if (x != int(x)) + x = int(x + 1); + if (int(x) > int(interval)) + exit (1); + } + END { if (int(x) > int(interval) || int(x) < int(interval-10)) exit(1) }' interval=$2 || return $? + return 0 +} + +echo_i "checking automatic key reloading interval ($n)" +ret=0 +check_interval ns1 3600 || ret=1 +check_interval ns2 1800 || ret=1 +check_interval ns3 600 || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking for key reloading loops ($n)" +ret=0 +# every key event should schedule a successor, so these should be equal +rekey_calls=$(grep "reconfiguring zone keys" ns*/named.run | wc -l) +rekey_events=$(grep "next key event" ns*/named.run | wc -l) +[ "$rekey_calls" = "$rekey_events" ] || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "forcing full sign with unreadable keys ($n)" +ret=0 +chmod 0 ns1/K.+*+*.key ns1/K.+*+*.private || ret=1 +($RNDCCMD 10.53.0.1 sign . 2>&1 | sed 's/^/ns1 /' | cat_i) || ret=1 +$DIG $DIGOPTS . @10.53.0.1 dnskey > dig.out.ns1.test$n || ret=1 +grep "status: NOERROR" dig.out.ns1.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "test turning on auto-dnssec during reconfig ($n)" +ret=0 +# first create a zone that doesn't have auto-dnssec +($RNDCCMD 10.53.0.3 addzone reconf.example '{ type primary; file "reconf.example.db"; };' 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1 +rekey_calls=$(grep "zone reconf.example.*next key event" ns3/named.run | wc -l) +[ "$rekey_calls" -eq 0 ] || ret=1 +# ...then we add auto-dnssec and reconfigure +($RNDCCMD 10.53.0.3 modzone reconf.example '{ type primary; file "reconf.example.db"; allow-update { any; }; auto-dnssec maintain; };' 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1 +rndc_reconfig ns3 10.53.0.3 +for i in 0 1 2 3 4 5 6 7 8 9; do + lret=0 + rekey_calls=$(grep "zone reconf.example.*next key event" ns3/named.run | wc -l) + [ "$rekey_calls" -gt 0 ] || lret=1 + if [ "$lret" -eq 0 ]; then break; fi + echo_i "waiting ... ($i)" + sleep 1 +done +n=$((n + 1)) +if [ "$lret" != 0 ]; then ret=$lret; fi +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "test CDS and CDNSKEY auto generation ($n)" +ret=0 +$DIG $DIGOPTS @10.53.0.3 sync.example cds > dig.out.ns3.cdstest$n +$DIG $DIGOPTS @10.53.0.3 sync.example cdnskey > dig.out.ns3.cdnskeytest$n +grep -i "sync.example.*in.cds.*[1-9][0-9]* " dig.out.ns3.cdstest$n > /dev/null || ret=1 +grep -i "sync.example.*in.cdnskey.*257 " dig.out.ns3.cdnskeytest$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "test 'dnssec-dnskey-kskonly no' affects DNSKEY/CDS/CDNSKEY ($n)" +ret=0 +$DIG $DIGOPTS @10.53.0.3 sync.example dnskey > dig.out.ns3.dnskeytest$n +$DIG $DIGOPTS @10.53.0.3 sync.example cdnskey > dig.out.ns3.cdnskeytest$n +$DIG $DIGOPTS @10.53.0.3 sync.example cds > dig.out.ns3.cdstest$n +lines=$(awk '$4 == "RRSIG" && $5 == "DNSKEY" {print}' dig.out.ns3.dnskeytest$n | wc -l) +test ${lines:-0} -eq 2 || ret=1 +lines=$(awk '$4 == "RRSIG" && $5 == "CDNSKEY" {print}' dig.out.ns3.cdnskeytest$n | wc -l) +test ${lines:-0} -eq 2 || ret=1 +lines=$(awk '$4 == "RRSIG" && $5 == "CDS" {print}' dig.out.ns3.cdstest$n | wc -l) +test ${lines:-0} -eq 2 || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "test 'dnssec-dnskey-kskonly yes' affects DNSKEY/CDS/CDNSKEY ($n)" +ret=0 +$DIG $DIGOPTS @10.53.0.3 kskonly.example dnskey > dig.out.ns3.dnskeytest$n +$DIG $DIGOPTS @10.53.0.3 kskonly.example cdnskey > dig.out.ns3.cdnskeytest$n +$DIG $DIGOPTS @10.53.0.3 kskonly.example cds > dig.out.ns3.cdstest$n +lines=$(awk '$4 == "RRSIG" && $5 == "DNSKEY" {print}' dig.out.ns3.dnskeytest$n | wc -l) +test ${lines:-0} -eq 1 || ret=1 +lines=$(awk '$4 == "RRSIG" && $5 == "CDNSKEY" {print}' dig.out.ns3.cdnskeytest$n | wc -l) +test ${lines:-0} -eq 1 || ret=1 +lines=$(awk '$4 == "RRSIG" && $5 == "CDS" {print}' dig.out.ns3.cdstest$n | wc -l) +test ${lines:-0} -eq 1 || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "setting CDS and CDNSKEY deletion times and calling 'rndc loadkeys'" +$SETTIME -D sync now $(cat sync.key) > settime.out.test$n || ret=1 +($RNDCCMD 10.53.0.3 loadkeys sync.example | sed 's/^/ns3 /' | cat_i) || ret=1 + +echo_i "checking that the CDS and CDNSKEY are deleted ($n)" +ret=0 +ensure_cds_and_cdnskey_are_deleted() { + $DIG $DIGOPTS @10.53.0.3 sync.example. CDS > dig.out.ns3.cdstest$n || return 1 + awk '$1 == "sync.example." && $4 == "CDS" { exit 1; }' dig.out.ns3.cdstest$n || return 1 + $DIG $DIGOPTS @10.53.0.3 sync.example. CDNSKEY > dig.out.ns3.cdnskeytest$n || return 1 + awk '$1 == "sync.example." && $4 == "CDNSKEY" { exit 1; }' dig.out.ns3.cdnskeytest$n || return 1 +} +retry 10 ensure_cds_and_cdnskey_are_deleted || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "check that dnssec-settime -p Dsync works ($n)" +ret=0 +$SETTIME -p Dsync $(cat sync.key) > settime.out.test$n || ret=1 +grep "SYNC Delete:" settime.out.test$n >/dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "check that dnssec-settime -p Psync works ($n)" +ret=0 +$SETTIME -p Psync $(cat sync.key) > settime.out.test$n || ret=1 +grep "SYNC Publish:" settime.out.test$n >/dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "check that zone with inactive KSK and active ZSK is properly autosigned ($n)" +ret=0 +$DIG $DIGOPTS @10.53.0.3 axfr inacksk2.example > dig.out.ns3.test$n + +zskid=$(awk '$4 == "DNSKEY" && $5 == 256 { print }' dig.out.ns3.test$n | + $DSFROMKEY -A -2 -f - inacksk2.example | awk '{ print $4}' ) +pattern="DNSKEY ${DEFAULT_ALGORITHM_NUMBER} 2 [0-9]* [0-9]* [0-9]* ${zskid} " +grep "${pattern}" dig.out.ns3.test$n > /dev/null || ret=1 + +kskid=$(awk '$4 == "DNSKEY" && $5 == 257 { print }' dig.out.ns3.test$n | + $DSFROMKEY -2 -f - inacksk2.example | awk '{ print $4}' ) +pattern="DNSKEY ${DEFAULT_ALGORITHM_NUMBER} 2 [0-9]* [0-9]* [0-9]* ${kskid} " +grep "${pattern}" dig.out.ns3.test$n > /dev/null && ret=1 + +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "check that zone with inactive ZSK and active KSK is properly autosigned ($n)" +ret=0 +$DIG $DIGOPTS @10.53.0.3 axfr inaczsk2.example > dig.out.ns3.test$n +grep "SOA ${DEFAULT_ALGORITHM_NUMBER} 2" dig.out.ns3.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +# +# Check that DNSKEY is now signed with the ZSK. +# +echo_i "check that zone with active and inactive KSK and active ZSK is properly" +echo_ic "resigned after the active KSK is deleted - stage 2: Verify that DNSKEY" +echo_ic "is now signed with the ZSK. ($n)" +ret=0 + +$DIG $DIGOPTS @10.53.0.3 axfr inacksk3.example > dig.out.ns3.test$n + +zskid=$(awk '$4 == "DNSKEY" && $5 == 256 { print }' dig.out.ns3.test$n | + $DSFROMKEY -A -2 -f - inacksk3.example | awk '{ print $4}' ) +pattern="DNSKEY ${DEFAULT_ALGORITHM_NUMBER} 2 [0-9]* [0-9]* [0-9]* ${zskid} " +grep "${pattern}" dig.out.ns3.test$n > /dev/null || ret=1 + +count=$(awk 'BEGIN { count = 0 } + $4 == "RRSIG" && $5 == "DNSKEY" { count++ } + END {print count}' dig.out.ns3.test$n) +test $count -eq 1 || ret=1 + +count=$(awk 'BEGIN { count = 0 } + $4 == "DNSKEY" { count++ } + END {print count}' dig.out.ns3.test$n) +test $count -eq 2 || ret=1 + +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +# +# Check that zone is now signed with the KSK. +# +echo_i "check that zone with active and inactive ZSK and active KSK is properly" +echo_ic "resigned after the active ZSK is deleted - stage 2: Verify that zone" +echo_ic "is now signed with the KSK. ($n)" +ret=0 +$DIG $DIGOPTS @10.53.0.3 axfr inaczsk3.example > dig.out.ns3.test$n +kskid=$(awk '$4 == "DNSKEY" && $5 == 257 { print }' dig.out.ns3.test$n | + $DSFROMKEY -2 -f - inaczsk3.example | awk '{ print $4}' ) +grep "CNAME ${DEFAULT_ALGORITHM_NUMBER} 3 [0-9]* [0-9]* [0-9]* ${kskid} " dig.out.ns3.test$n > /dev/null || ret=1 +count=$(awk 'BEGIN { count = 0 } + $4 == "RRSIG" && $5 == "CNAME" { count++ } + END {print count}' dig.out.ns3.test$n) +test $count -eq 1 || ret=1 +count=$(awk 'BEGIN { count = 0 } + $4 == "DNSKEY" { count++ } + END {print count}' dig.out.ns3.test$n) +test $count -eq 2 || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking for out-of-zone NSEC3 records after ZSK removal ($n)" +ret=0 +# Switch the zone over to NSEC3 and wait until the transition is complete. +$RNDCCMD 10.53.0.3 signing -nsec3param 1 1 10 12345678 delzsk.example. > signing.out.1.test$n 2>&1 || ret=1 +for i in 0 1 2 3 4 5 6 7 8 9; do + _ret=1 + $DIG $DIGOPTS delzsk.example NSEC3PARAM @10.53.0.3 > dig.out.ns3.1.test$n 2>&1 || ret=1 + { grep "NSEC3PARAM.*12345678" dig.out.ns3.1.test$n > /dev/null 2>&1; rc=$?; } || true + if [ $rc -eq 0 ]; then + $RNDCCMD 10.53.0.3 signing -list delzsk.example > signing.out.2.test$n 2>&1 + { grep "Creating NSEC3 chain " signing.out.2.test$n > /dev/null 2>&1; rc=$?; } || true + if [ $rc -ne 0 ]; then + _ret=0 + break + fi + fi + sleep 1 +done +if [ $_ret -ne 0 ]; then + echo_i "timed out waiting for NSEC3 chain creation" + ret=1 +fi +# Mark the inactive ZSK as pending removal. +file="ns3/$(cat delzsk.key).key" +$SETTIME -D now-1h $file > settime.out.test$n || ret=1 +# Trigger removal of the inactive ZSK and wait until its completion. +($RNDCCMD 10.53.0.3 loadkeys delzsk.example 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1 +for i in 0 1 2 3 4 5 6 7 8 9; do + _ret=1 + $RNDCCMD 10.53.0.3 signing -list delzsk.example > signing.out.3.test$n 2>&1 + { grep "Signing " signing.out.3.test$n > /dev/null 2>&1; rc=$?; } || true + if [ $rc -ne 0 ]; then + if [ $(grep "Done signing " signing.out.3.test$n | wc -l) -eq 2 ]; then + _ret=0 + break + fi + fi + sleep 1 +done +if [ $_ret -ne 0 ]; then + echo_i "timed out waiting for key removal" + ret=1 +fi +# Check whether key removal caused NSEC3 records to be erroneously created for +# glue records due to a secure delegation already being signed by the active key +# (i.e. a key other than the one being removed but using the same algorithm). +# +# For reference: +# +# $ nsec3hash 12345678 1 10 ns.sub.delzsk.example. +# 589R358VSPJUFVAJU949JPVF74D9PTGH (salt=12345678, hash=1, iterations=10) +# +$DIG $DIGOPTS delzsk.example AXFR @10.53.0.3 > dig.out.ns3.3.test$n || ret=1 +grep "589R358VSPJUFVAJU949JPVF74D9PTGH" dig.out.ns3.3.test$n > /dev/null 2>&1 && ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "check that DNAME at apex with NSEC3 is correctly signed (auto-dnssec maintain) ($n)" +ret=0 +$DIG $DIGOPTS txt dname-at-apex-nsec3.example @10.53.0.3 > dig.out.ns3.test$n || ret=1 +grep "RRSIG NSEC3 ${DEFAULT_ALGORITHM_NUMBER} 3 600" dig.out.ns3.test$n > /dev/null || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking that DNAME is not treated as a delegation when signing ($n)" +ret=0 +$DIG $DIGOPTS dname-and-txt.secure.example. DNAME @10.53.0.3 > dig.out.ns3.1.test$n || ret=1 +grep "dname-and-txt.secure.example.*RRSIG.*DNAME" dig.out.ns3.1.test$n > /dev/null 2>&1 || ret=1 +$DIG $DIGOPTS dname-and-txt.secure.example. TXT @10.53.0.3 > dig.out.ns3.2.test$n || ret=1 +grep "dname-and-txt.secure.example.*RRSIG.*TXT" dig.out.ns3.2.test$n > /dev/null 2>&1 || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking key maintenance events were logged correctly ($n)" +ret=0 +pub=$(grep "DNSKEY .* is now published" ns1/named.run | wc -l) +[ "$pub" -eq 6 ] || ret=1 +act=$(grep "DNSKEY .* is now active" ns1/named.run | wc -l) +[ "$act" -eq 5 ] || ret=1 +rev=$(grep "DNSKEY .* is now revoked" ns1/named.run | wc -l) +[ "$rev" -eq 1 ] || ret=1 +inac=$(grep "DNSKEY .* is now inactive" ns1/named.run | wc -l) +[ "$inac" -eq 1 ] || ret=1 +del=$(grep "DNSKEY .* is now deleted" ns1/named.run | wc -l) +[ "$del" -eq 1 ] || ret=1 +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking that CDS (DELETE) persists after zone sign ($n)" +echo_i "update add cds-delete.example. CDS 0 0 00" +ret=0 +$NSUPDATE > nsupdate.out 2>&1 < dig.out.ns3.test$n || return 1 + grep "CDS.*0.*0.*0.*00" dig.out.ns3.test$n > /dev/null 2>&1 || return 1 + return 0 +) +_cdnskey_delete_nx() { + $DIG $DIGOPTS +noall +answer $1 cdnskey @10.53.0.3 > dig.out.ns3.test$n || return 1 + grep "CDNSKEY.*0.*3.*0.*AA==" dig.out.ns3.test$n > /dev/null 2>&1 && return 1 + return 0 +} + +echo_i "query cds-delete.example. CDS" +retry_quiet 10 _cds_delete cds-delete.example. || ret=1 +echo_i "query cds-delete.example. CDNSKEY" +retry_quiet 1 _cdnskey_delete_nx cds-delete.example. || ret=1 + +echo_i "sign cds-delete.example." +nextpart ns3/named.run >/dev/null +$RNDCCMD 10.53.0.3 sign cds-delete.example > /dev/null 2>&1 || ret=1 +wait_for_log 10 "zone cds-delete.example/IN: next key event" ns3/named.run +# The CDS (DELETE) record should still be here. +echo_i "query cds-delete.example. CDS" +retry_quiet 1 _cds_delete cds-delete.example. || ret=1 +# The CDNSKEY (DELETE) record should still not be added. +echo_i "query cds-delete.example. CDNSKEY" +retry_quiet 1 _cdnskey_delete_nx cds-delete.example. || ret=1 + +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "checking that CDNSKEY (DELETE) persists after zone sign ($n)" +echo_i "update add cdnskey-delete.example. CDNSKEY 0 3 0 AA==" +ret=0 +$NSUPDATE > nsupdate.out 2>&1 < dig.out.ns3.test$n || return 1 + grep "CDS.*0.*0.*0.*00" dig.out.ns3.test$n > /dev/null 2>&1 && return 1 + return 0 +) +_cdnskey_delete() { + $DIG $DIGOPTS +noall +answer $1 cdnskey @10.53.0.3 > dig.out.ns3.test$n || return 1 + grep "CDNSKEY.*0.*3.*0.*AA==" dig.out.ns3.test$n > /dev/null 2>&1 || return 1 + return 0 +} + +echo_i "query cdnskey-delete.example. CDNSKEY" +retry_quiet 10 _cdnskey_delete cdnskey-delete.example. || ret=1 +echo_i "query cdnskey-delete.example. CDS" +retry_quiet 1 _cds_delete_nx cdnskey-delete.example. || ret=1 + +echo_i "sign cdsnskey-delete.example." +nextpart ns3/named.run >/dev/null +$RNDCCMD 10.53.0.3 sign cdnskey-delete.example > /dev/null 2>&1 || ret=1 +wait_for_log 10 "zone cdnskey-delete.example/IN: next key event" ns3/named.run +# The CDNSKEY (DELETE) record should still be here. +echo_i "query cdnskey-delete.example. CDNSKEY" +retry_quiet 1 _cdnskey_delete cdnskey-delete.example. || ret=1 +# The CDS (DELETE) record should still not be added. +echo_i "query cdnskey-delete.example. CDS" +retry_quiet 1 _cds_delete_nx cdnskey-delete.example. || ret=1 + +n=$((n + 1)) +if [ $ret != 0 ]; then echo_i "failed"; fi +status=$((status + ret)) + +echo_i "check removal of ENT NSEC3 records when opt out delegations are removed ($n)" +ret=0 +zone=optout-with-ent +hash=JTR8R6AVFULU0DQH9I6HNN2KUK5956EL +# check that NSEC3 for ENT is present +$DIG $DIGOPTS @10.53.0.2 a "ent.${zone}" > dig.out.pre.ns2.test$n +grep "status: NOERROR" dig.out.pre.ns2.test$n >/dev/null || ret=1 +grep "ANSWER: 0, AUTHORITY: 4, " dig.out.pre.ns2.test$n > /dev/null || ret=1 +grep "^${hash}.${zone}." dig.out.pre.ns2.test$n > /dev/null || ret=1 +# remove first delegation of two delegations, NSEC3 for ENT should remain. +( +echo zone $zone +echo server 10.53.0.2 "$PORT" +echo update del sub1.ent.$zone NS +echo send +) | $NSUPDATE +# check that NSEC3 for ENT is still present +$DIG $DIGOPTS @10.53.0.2 a "ent.${zone}" > dig.out.pre.ns2.test$n +$DIG $DIGOPTS @10.53.0.2 a "ent.${zone}" > dig.out.mid.ns2.test$n +grep "status: NOERROR" dig.out.mid.ns2.test$n >/dev/null || ret=1 +grep "ANSWER: 0, AUTHORITY: 4, " dig.out.mid.ns2.test$n > /dev/null || ret=1 +grep "^${hash}.${zone}." dig.out.mid.ns2.test$n > /dev/null || ret=1 +# remove second delegation of two delegations, NSEC3 for ENT should be deleted. +( +echo zone $zone +echo server 10.53.0.2 "$PORT" +echo update del sub2.ent.$zone NS +echo send +) | $NSUPDATE +# check that NSEC3 for ENT is gone present +$DIG $DIGOPTS @10.53.0.2 a "ent.${zone}" > dig.out.post.ns2.test$n +grep "status: NXDOMAIN" dig.out.post.ns2.test$n >/dev/null || ret=1 +grep "ANSWER: 0, AUTHORITY: 4, " dig.out.post.ns2.test$n > /dev/null || ret=1 +grep "^${hash}.${zone}." dig.out.post.ns2.test$n > /dev/null && ret=1 +$DIG $DIGOPTS @10.53.0.2 axfr "${zone}" > dig.out.axfr.ns2.test$n +grep "^${hash}.${zone}." dig.out.axfr.ns2.test$n > /dev/null && ret=1 +n=$((n+1)) +if [ "$ret" -ne 0 ]; then echo_i "failed"; fi +status=$((status+ret)) + +echo_i "exit status: $status" +[ $status -eq 0 ] || exit 1 -- cgit v1.2.3