From 3b9b6d0b8e7f798023c9d109c490449d528fde80 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Sun, 7 Apr 2024 17:59:48 +0200
Subject: Adding upstream version 1:9.18.19.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 bin/tests/system/inline/tests.sh | 1501 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 1501 insertions(+)
 create mode 100755 bin/tests/system/inline/tests.sh

(limited to 'bin/tests/system/inline/tests.sh')

diff --git a/bin/tests/system/inline/tests.sh b/bin/tests/system/inline/tests.sh
new file mode 100755
index 0000000..e9c4554
--- /dev/null
+++ b/bin/tests/system/inline/tests.sh
@@ -0,0 +1,1501 @@
+#!/bin/sh
+
+# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+#
+# SPDX-License-Identifier: MPL-2.0
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0.  If a copy of the MPL was not distributed with this
+# file, you can obtain one at https://mozilla.org/MPL/2.0/.
+#
+# See the COPYRIGHT file distributed with this work for additional
+# information regarding copyright ownership.
+
+set -e
+
+. ../conf.sh
+
+DIGOPTS="+tcp +dnssec -p ${PORT}"
+RNDCCMD="$RNDC -c ../common/rndc.conf -p ${CONTROLPORT} -s"
+
+dig_with_opts() {
+	$DIG $DIGOPTS "$@"
+}
+
+rndccmd() {
+	$RNDCCMD "$@"
+}
+
+wait_for_serial() (
+    $DIG $DIGOPTS "@$1" "$2" SOA > "$4"
+    serial=$(awk '$4 == "SOA" { print $7 }' "$4")
+    [ "$3" -eq "${serial:--1}" ]
+)
+
+status=0
+n=0
+ret=0
+
+$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 - nsec3 > /dev/null 2>&1 || ret=1
+
+for i in 1 2 3 4 5 6 7 8 9 0
+do
+	nsec3param=$($DIG $DIGOPTS +nodnssec +short @10.53.0.3 nsec3param nsec3.) || ret=1
+	test "$nsec3param" = "1 0 0 -" && break
+	sleep 1
+done
+
+if [ $ret != 0 ]; then echo_i "pre-condition failed, test aborted"; exit 1; fi
+
+n=$((n + 1))
+echo_i "checking that an unsupported algorithm is not used for signing ($n)"
+ret=0
+grep -q "algorithm is unsupported" ns3/named.run || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that rrsigs are replaced with ksk only ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.3 axfr nsec3. |
+	awk '/RRSIG NSEC3/ {a[$1]++} END { for (i in a) {if (a[i] != 1) exit (1)}}' || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that the zone is signed on initial transfer ($n)"
+ret=0
+for i in 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
+do
+	ret=0
+	$RNDCCMD 10.53.0.3 signing -list bits > signing.out.test$n 2>&1 || ret=1
+	keys=$(grep '^Done signing' signing.out.test$n | wc -l)
+	[ $keys = 2 ] || ret=1
+	if [ $ret = 0 ]; then break; fi
+	sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking expired signatures are updated on load ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.3 +noall +answer +dnssec expired SOA > dig.out.ns3.test$n || ret=1
+expiry=$(awk '$4 == "RRSIG" { print $9 }' dig.out.ns3.test$n)
+[ "$expiry" = "20110101000000" ] && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking removal of private type record via 'rndc signing -clear' ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 signing -list bits > signing.out.test$n 2>&1 || ret=1
+keys=$(sed -n -e 's/Done signing with key \(.*\)$/\1/p' signing.out.test$n)
+for key in $keys; do
+	$RNDCCMD 10.53.0.3 signing -clear ${key} bits > /dev/null || ret=1
+	break;	# We only want to remove 1 record for now.
+done 2>&1 |sed 's/^/ns3 /' | cat_i
+
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+	ans=0
+	$RNDCCMD 10.53.0.3 signing -list bits > signing.out.test$n 2>&1 || ret=1
+        num=$(grep "Done signing with" signing.out.test$n | wc -l)
+	[ $num = 1 ] && break
+	sleep 1
+done
+[ $ans = 0 ] || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking private type was properly signed ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.6 bits TYPE65534 > dig.out.ns6.test$n || ret=1
+grep "ANSWER: 2," dig.out.ns6.test$n > /dev/null || ret=1
+grep "flags:.* ad[ ;]" dig.out.ns6.test$n > /dev/null || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking removal of remaining private type record via 'rndc signing -clear all' ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 signing -clear all bits > /dev/null || ret=1
+
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+	ans=0
+	$RNDCCMD 10.53.0.3 signing -list bits > signing.out.test$n 2>&1 || ret=1
+	grep "No signing records found" signing.out.test$n > /dev/null || ans=1
+	[ $ans = 1 ] || break
+	sleep 1
+done
+[ $ans = 0 ] || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking negative private type response was properly signed ($n)"
+ret=0
+sleep 1
+$DIG $DIGOPTS @10.53.0.6 bits TYPE65534 > dig.out.ns6.test$n || ret=1
+grep "status: NOERROR" dig.out.ns6.test$n > /dev/null || ret=1
+grep "ANSWER: 0," dig.out.ns6.test$n > /dev/null || ret=1
+grep "flags:.* ad[ ;]" dig.out.ns6.test$n > /dev/null || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that the record is added on the hidden primary ($n)"
+ret=0
+
+$NSUPDATE << EOF || ret=1
+zone bits
+server 10.53.0.2 ${PORT}
+update add added.bits 0 A 1.2.3.4
+send
+EOF
+
+$DIG $DIGOPTS @10.53.0.2 added.bits A > dig.out.ns2.test$n || ret=1
+grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that update has been transferred and has been signed ($n)"
+ret=0
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+	ret=0
+	$DIG $DIGOPTS @10.53.0.3 added.bits A > dig.out.ns3.test$n || ret=1
+	grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+	grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+	if [ $ret = 0 ]; then break; fi
+	sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking YYYYMMDDVV (2011072400) serial on hidden primary ($n)"
+ret=0
+
+$NSUPDATE << EOF || ret=1
+zone bits
+server 10.53.0.2 ${PORT}
+update add bits 0 SOA ns2.bits. . 2011072400 20 20 1814400 3600
+send
+EOF
+
+$DIG $DIGOPTS @10.53.0.2 bits SOA > dig.out.ns2.test$n || ret=1
+grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1
+grep "2011072400" dig.out.ns2.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking YYYYMMDDVV (2011072400) serial in signed zone ($n)"
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+	ret=0
+	$DIG $DIGOPTS @10.53.0.3 bits SOA > dig.out.ns3.test$n || ret=1
+	grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+	grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+	grep "2011072400" dig.out.ns3.test$n > /dev/null || ret=1
+	if [ $ret = 0 ]; then break; fi
+	sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that the zone is signed on initial transfer, noixfr ($n)"
+ret=0
+for i in 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
+do
+	ret=0
+	$RNDCCMD 10.53.0.3 signing -list noixfr > signing.out.test$n 2>&1 || ret=1
+	keys=$(grep '^Done signing' signing.out.test$n | wc -l)
+	[ $keys = 2 ] || ret=1
+	if [ $ret = 0 ]; then break; fi
+	sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that the record is added on the hidden primary, noixfr ($n)"
+ret=0
+
+$NSUPDATE << EOF || ret=1
+zone noixfr
+server 10.53.0.4 ${PORT}
+update add added.noixfr 0 A 1.2.3.4
+send
+EOF
+
+$DIG $DIGOPTS @10.53.0.4 added.noixfr A > dig.out.ns4.test$n || ret=1
+grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that update has been transferred and has been signed, noixfr ($n)"
+ret=0
+for i in 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
+do
+	ret=0
+	$DIG $DIGOPTS @10.53.0.3 added.noixfr A > dig.out.ns3.test$n || ret=1
+	grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+	grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+	if [ $ret = 0 ]; then break; fi
+	sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking YYYYMMDDVV (2011072400) serial on hidden primary, noixfr ($n)"
+ret=0
+
+$NSUPDATE << EOF || ret=1
+zone noixfr
+server 10.53.0.4 ${PORT}
+update add noixfr 0 SOA ns4.noixfr. . 2011072400 20 20 1814400 3600
+send
+EOF
+
+$DIG $DIGOPTS @10.53.0.4 noixfr SOA > dig.out.ns4.test$n || ret=1
+grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1
+grep "2011072400" dig.out.ns4.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking YYYYMMDDVV (2011072400) serial in signed zone, noixfr ($n)"
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+	ret=0
+	$DIG $DIGOPTS @10.53.0.3 noixfr SOA > dig.out.ns3.test$n || ret=1
+	grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+	grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+	grep "2011072400" dig.out.ns3.test$n > /dev/null || ret=1
+	if [ $ret = 0 ]; then break; fi
+	sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that the primary zone signed on initial load ($n)"
+ret=0
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+	ret=0
+	$RNDCCMD 10.53.0.3 signing -list primary  > signing.out.test$n 2>&1 || ret=1
+	keys=$(grep '^Done signing' signing.out.test$n | wc -l)
+	[ $keys = 2 ] || ret=1
+	if [ $ret = 0 ]; then break; fi
+	sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking removal of private type record via 'rndc signing -clear' (primary) ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 signing -list primary > signing.out.test$n 2>&1 || ret=1
+keys=$(sed -n -e 's/Done signing with key \(.*\)$/\1/p' signing.out.test$n)
+for key in $keys; do
+	$RNDCCMD 10.53.0.3 signing -clear ${key} primary > /dev/null || ret=1
+	break;	# We only want to remove 1 record for now.
+done 2>&1 |sed 's/^/ns3 /' | cat_i
+
+for i in 1 2 3 4 5 6 7 8 9
+do
+	ans=0
+	$RNDCCMD 10.53.0.3 signing -list primary > signing.out.test$n 2>&1 || ret=1
+        num=$(grep "Done signing with" signing.out.test$n | wc -l)
+	[ $num = 1 ] && break
+	sleep 1
+done
+[ $ans = 0 ] || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking private type was properly signed (primary) ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.6 primary TYPE65534 > dig.out.ns6.test$n || ret=1
+grep "ANSWER: 2," dig.out.ns6.test$n > /dev/null || ret=1
+grep "flags:.* ad[ ;]" dig.out.ns6.test$n > /dev/null || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking removal of remaining private type record via 'rndc signing -clear' (primary) ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 signing -clear all primary > /dev/null || ret=1
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+	ans=0
+	$RNDCCMD 10.53.0.3 signing -list primary > signing.out.test$n 2>&1 || ret=1
+	grep "No signing records found" signing.out.test$n > /dev/null || ans=1
+	[ $ans = 1 ] || break
+	sleep 1
+done
+[ $ans = 0 ] || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "check adding of record to unsigned primary ($n)"
+ret=0
+cp ns3/primary2.db.in ns3/primary.db
+rndc_reload ns3 10.53.0.3 primary
+for i in 1 2 3 4 5 6 7 8 9
+do
+	ans=0
+	$DIG $DIGOPTS @10.53.0.3 e.primary A > dig.out.ns3.test$n || ret=1
+	grep "10.0.0.5" dig.out.ns3.test$n > /dev/null || ans=1
+	grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ans=1
+	[ $ans = 1 ] || break
+	sleep 1
+done
+[ $ans = 0 ] || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "check adding record fails when SOA serial not changed ($n)"
+ret=0
+echo "c A 10.0.0.3" >> ns3/primary.db
+rndc_reload ns3 10.53.0.3
+sleep 1
+$DIG $DIGOPTS @10.53.0.3 c.primary A > dig.out.ns3.test$n || ret=1
+grep "NXDOMAIN" dig.out.ns3.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "check adding record works after updating SOA serial ($n)"
+ret=0
+cp ns3/primary3.db.in ns3/primary.db
+$RNDCCMD 10.53.0.3 reload primary 2>&1 | sed 's/^/ns3 /' | cat_i
+for i in 1 2 3 4 5 6 7 8 9
+do
+	ans=0
+	$DIG $DIGOPTS @10.53.0.3 c.primary A > dig.out.ns3.test$n || ret=1
+	grep "10.0.0.3" dig.out.ns3.test$n > /dev/null || ans=1
+	grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ans=1
+	[ $ans = 1 ] || break
+	sleep 1
+done
+[ $ans = 0 ] || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "check the added record was properly signed ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.3 e.primary A > dig.out.ns6.test$n || ret=1
+grep "10.0.0.5" dig.out.ns6.test$n > /dev/null || ans=1
+grep "ANSWER: 2," dig.out.ns6.test$n > /dev/null || ans=1
+grep "flags:.* ad[ ;]" dig.out.ns6.test$n > /dev/null || ans=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that the dynamic primary zone signed on initial load ($n)"
+ret=0
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+	ret=0
+	$RNDCCMD 10.53.0.3 signing -list dynamic > signing.out.test$n 2>&1 || ret=1
+	keys=$(grep '^Done signing' signing.out.test$n | wc -l)
+	[ $keys = 2 ] || ret=1
+	if [ $ret = 0 ]; then break; fi
+	sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking primary zone that was updated while offline is correct ($n)"
+ret=0
+$DIG $DIGOPTS +nodnssec +short @10.53.0.3 updated SOA >dig.out.ns2.soa.test$n || ret=1
+serial=$(awk '{print $3}' dig.out.ns2.soa.test$n)
+# serial should have changed
+[ "$serial" = "2000042407" ] && ret=1
+# e.updated should exist and should be signed
+$DIG $DIGOPTS @10.53.0.3 e.updated A > dig.out.ns3.test$n || ret=1
+grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+# updated.db.signed.jnl should exist, should have the source serial
+# of primary2.db, and should show a minimal diff: no more than 8 added
+# records (SOA/RRSIG, 2 x NSEC/RRSIG, A/RRSIG), and 4 removed records
+# (SOA/RRSIG, NSEC/RRSIG).
+$JOURNALPRINT ns3/updated.db.signed.jnl >journalprint.out.test$n || ret=1
+serial=$(awk '/Source serial =/ {print $4}' journalprint.out.test$n)
+[ "$serial" = "2000042408" ] || ret=1
+diffsize=$(wc -l < journalprint.out.test$n)
+[ "$diffsize" -le 13 ] || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking adding of record to unsigned primary using UPDATE ($n)"
+ret=0
+
+[ -f ns3/dynamic.db.jnl ] && { ret=1 ; echo_i "journal exists (pretest)" ; }
+
+$NSUPDATE << EOF || ret=1
+zone dynamic
+server 10.53.0.3 ${PORT}
+update add e.dynamic 0 A 1.2.3.4
+send
+EOF
+
+[ -f ns3/dynamic.db.jnl ] || { ret=1 ; echo_i "journal does not exist (posttest)" ; }
+
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+	ans=0
+	$DIG $DIGOPTS @10.53.0.3 e.dynamic > dig.out.ns3.test$n || ret=1
+	grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ans=1
+	grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ans=1
+	grep "1.2.3.4" dig.out.ns3.test$n > /dev/null || ans=1
+	[ $ans = 0 ] && break
+	sleep 1
+done
+[ $ans = 0 ] || { ret=1; echo_i "signed record not found"; cat dig.out.ns3.test$n ; }
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "stop bump in the wire signer server ($n)"
+ret=0
+stop_server ns3 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "restart bump in the wire signer server ($n)"
+ret=0
+start_server --noclean --restart --port ${PORT} ns3 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking YYYYMMDDVV (2011072450) serial on hidden primary ($n)"
+ret=0
+
+$NSUPDATE << EOF || ret=1
+zone bits
+server 10.53.0.2 ${PORT}
+update add bits 0 SOA ns2.bits. . 2011072450 20 20 1814400 3600
+send
+EOF
+
+$DIG $DIGOPTS @10.53.0.2 bits SOA > dig.out.ns2.test$n || ret=1
+grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1
+grep "2011072450" dig.out.ns2.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking YYYYMMDDVV (2011072450) serial in signed zone ($n)"
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+	ret=0
+	$DIG $DIGOPTS @10.53.0.3 bits SOA > dig.out.ns3.test$n || ret=1
+	grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+	grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+	grep "2011072450" dig.out.ns3.test$n > /dev/null || ret=1
+	if [ $ret = 0 ]; then break; fi
+	sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking YYYYMMDDVV (2011072450) serial on hidden primary, noixfr ($n)"
+ret=0
+
+$NSUPDATE << EOF || ret=1
+zone noixfr
+server 10.53.0.4 ${PORT}
+update add noixfr 0 SOA ns4.noixfr. . 2011072450 20 20 1814400 3600
+send
+EOF
+
+$DIG $DIGOPTS @10.53.0.4 noixfr SOA > dig.out.ns4.test$n || ret=1
+grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1
+grep "2011072450" dig.out.ns4.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking YYYYMMDDVV (2011072450) serial in signed zone, noixfr ($n)"
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+	ret=0
+	$DIG $DIGOPTS @10.53.0.3 noixfr SOA > dig.out.ns3.test$n || ret=1
+	grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+	grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+	grep "2011072450" dig.out.ns3.test$n > /dev/null || ret=1
+	if [ $ret = 0 ]; then break; fi
+	sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking forwarded update on hidden primary ($n)"
+ret=0
+
+$NSUPDATE << EOF || ret=1
+zone bits
+server 10.53.0.3 ${PORT}
+update add bits 0 SOA ns2.bits. . 2011072460 20 20 1814400 3600
+send
+EOF
+
+$DIG $DIGOPTS @10.53.0.2 bits SOA > dig.out.ns2.test$n || ret=1
+grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1
+grep "2011072460" dig.out.ns2.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking forwarded update on signed zone ($n)"
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+	ret=0
+	$DIG $DIGOPTS @10.53.0.3 bits SOA > dig.out.ns3.test$n || ret=1
+	grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+	grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+	grep "2011072460" dig.out.ns3.test$n > /dev/null || ret=1
+	if [ $ret = 0 ]; then break; fi
+	sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking forwarded update on hidden primary, noixfr ($n)"
+ret=0
+
+$NSUPDATE << EOF || ret=1
+zone noixfr
+server 10.53.0.3 ${PORT}
+update add noixfr 0 SOA ns4.noixfr. . 2011072460 20 20 1814400 3600
+send
+EOF
+
+$DIG $DIGOPTS @10.53.0.4 noixfr SOA > dig.out.ns4.test$n || ret=1
+grep "status: NOERROR" dig.out.ns4.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns4.test$n > /dev/null || ret=1
+grep "2011072460" dig.out.ns4.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking forwarded update on signed zone, noixfr ($n)"
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+	ret=0
+	$DIG $DIGOPTS @10.53.0.3 noixfr SOA > dig.out.ns3.test$n || ret=1
+	grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+	grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+	grep "2011072460" dig.out.ns3.test$n > /dev/null || ret=1
+	if [ $ret = 0 ]; then break; fi
+	sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+ret=0
+n=$((n + 1))
+echo_i "checking turning on of inline signing in a secondary zone via reload ($n)"
+$DIG $DIGOPTS @10.53.0.5 +dnssec bits SOA > dig.out.ns5.test$n || ret=1
+grep "status: NOERROR" dig.out.ns5.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns5.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "setup broken"; fi
+status=$((status + ret))
+copy_setports ns5/named.conf.post ns5/named.conf
+(cd ns5; $KEYGEN -q -a ${DEFAULT_ALGORITHM} bits) > /dev/null 2>&1
+(cd ns5; $KEYGEN -q -a ${DEFAULT_ALGORITHM} -f KSK bits) > /dev/null 2>&1
+rndc_reload ns5 10.53.0.5
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+	ret=0
+	$DIG $DIGOPTS @10.53.0.5 bits SOA > dig.out.ns5.test$n || ret=1
+	grep "status: NOERROR" dig.out.ns5.test$n > /dev/null || ret=1
+	grep "ANSWER: 2," dig.out.ns5.test$n > /dev/null || ret=1
+	if [ $ret = 0 ]; then break; fi
+	sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking rndc freeze/thaw of dynamic inline zone no change ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 freeze dynamic > freeze.test$n 2>&1 || { echo_i "/' < freeze.test$n"; ret=1;  }
+sleep 1
+$RNDCCMD 10.53.0.3 thaw dynamic > thaw.test$n 2>&1 || { echo_i "rndc thaw dynamic failed" ; ret=1; }
+sleep 1
+grep "zone dynamic/IN (unsigned): ixfr-from-differences: unchanged" ns3/named.run > /dev/null ||  ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+
+n=$((n + 1))
+echo_i "checking rndc freeze/thaw of dynamic inline zone ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 freeze dynamic > freeze.test$n 2>&1 || ret=1
+sleep 1
+awk '$2 == ";" && $3 ~ /serial/ { printf("%d %s %s\n", $1 + 1, $2, $3); next; }
+     { print; }
+     END { print "freeze1.dynamic. 0 TXT freeze1"; } ' ns3/dynamic.db > ns3/dynamic.db.new
+mv ns3/dynamic.db.new ns3/dynamic.db
+$RNDCCMD 10.53.0.3 thaw dynamic > thaw.test$n 2>&1 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "check added record freeze1.dynamic ($n)"
+for i in 1 2 3 4 5 6 7 8 9
+do
+    ret=0
+    $DIG $DIGOPTS @10.53.0.3 freeze1.dynamic TXT > dig.out.ns3.test$n || ret=1
+    grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+    grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+    test $ret = 0 && break
+    sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+# allow 1 second so that file time stamps change
+sleep 1
+
+n=$((n + 1))
+echo_i "checking rndc freeze/thaw of server ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 freeze > freeze.test$n 2>&1 || ret=1
+sleep 1
+awk '$2 == ";" && $3 ~ /serial/ { printf("%d %s %s\n", $1 + 1, $2, $3); next; }
+     { print; }
+     END { print "freeze2.dynamic. 0 TXT freeze2"; } ' ns3/dynamic.db > ns3/dynamic.db.new
+mv ns3/dynamic.db.new ns3/dynamic.db
+$RNDCCMD 10.53.0.3 thaw > thaw.test$n 2>&1 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "check added record freeze2.dynamic ($n)"
+for i in 1 2 3 4 5 6 7 8 9
+do
+    ret=0
+    $DIG $DIGOPTS @10.53.0.3 freeze2.dynamic TXT > dig.out.ns3.test$n || ret=1
+    grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+    grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ret=1
+    test $ret = 0 && break
+    sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "check rndc reload allows reuse of inline-signing zones ($n)"
+ret=0
+{ $RNDCCMD 10.53.0.3 reload 2>&1 || ret=1 ; } | sed 's/^/ns3 /' | cat_i
+grep "not reusable" ns3/named.run > /dev/null 2>&1 && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "check rndc sync removes both signed and unsigned journals ($n)"
+ret=0
+[ -f ns3/dynamic.db.jnl ] || ret=1
+[ -f ns3/dynamic.db.signed.jnl ] || ret=1
+$RNDCCMD 10.53.0.3 sync -clean dynamic 2>&1 || ret=1
+[ -f ns3/dynamic.db.jnl ] && ret=1
+[ -f ns3/dynamic.db.signed.jnl ] && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that the retransfer record is added on the hidden primary ($n)"
+ret=0
+
+$NSUPDATE << EOF || ret=1
+zone retransfer
+server 10.53.0.2 ${PORT}
+update add added.retransfer 0 A 1.2.3.4
+send
+
+EOF
+
+$DIG $DIGOPTS @10.53.0.2 added.retransfer A > dig.out.ns2.test$n || ret=1
+grep "status: NOERROR" dig.out.ns2.test$n > /dev/null || ret=1
+grep "ANSWER: 1," dig.out.ns2.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that the change has not been transferred due to notify ($n)"
+ret=0
+for i in 0 1 2 3 4 5 6 7 8 9
+do
+	ans=0
+	$DIG $DIGOPTS @10.53.0.3 added.retransfer A > dig.out.ns3.test$n || ret=1
+	grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ans=1
+	[ $ans = 0 ] && break
+	sleep 1
+done
+if [ $ans != 1 ]; then echo_i "failed"; ret=1; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "check rndc retransfer of a inline secondary zone works ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 retransfer retransfer 2>&1 || ret=1
+for i in 0 1 2 3 4 5 6 7 8 9
+do
+	ans=0
+	$DIG $DIGOPTS @10.53.0.3 added.retransfer A > dig.out.ns3.test$n || ret=1
+	grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ans=1
+	grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ans=1
+	[ $ans = 0 ] && break
+	sleep 1
+done
+[ $ans = 1 ] && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "check 'rndc signing -nsec3param' requests are queued for zones which are not loaded ($n)"
+ret=0
+# The "retransfer3" zone is configured with "allow-transfer { none; };" on ns2,
+# which means it should not yet be available on ns3.
+$DIG $DIGOPTS @10.53.0.3 retransfer3 SOA > dig.out.ns3.pre.test$n || ret=1
+grep "status: SERVFAIL" dig.out.ns3.pre.test$n > /dev/null || ret=1
+# Switch the zone to NSEC3.  An "NSEC3 -> NSEC -> NSEC3" sequence is used purely
+# to test that multiple queued "rndc signing -nsec3param" requests are handled
+# properly.
+$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 - retransfer3 > /dev/null 2>&1 || ret=1
+$RNDCCMD 10.53.0.3 signing -nsec3param none retransfer3 > /dev/null 2>&1 || ret=1
+$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 - retransfer3 > /dev/null 2>&1 || ret=1
+# Reconfigure ns2 to allow outgoing transfers for the "retransfer3" zone.
+sed "s|\(allow-transfer { none; };.*\)|// \1|;" ns2/named.conf > ns2/named.conf.new
+mv ns2/named.conf.new ns2/named.conf
+$RNDCCMD 10.53.0.2 reconfig || ret=1
+# Request ns3 to retransfer the "retransfer3" zone.
+$RNDCCMD 10.53.0.3 retransfer retransfer3 || ret=1
+# Check whether "retransfer3" uses NSEC3 as requested.
+for i in 0 1 2 3 4 5 6 7 8 9
+do
+	ret=0
+	$DIG $DIGOPTS @10.53.0.3 nonexist.retransfer3 A > dig.out.ns3.post.test$n.$i || ret=1
+	grep "status: NXDOMAIN" dig.out.ns3.post.test$n.$i > /dev/null || ret=1
+	grep "NSEC3" dig.out.ns3.post.test$n.$i > /dev/null || ret=1
+	test $ret -eq 0 && break
+	sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "check rndc retransfer of a inline nsec3 secondary retains nsec3 ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 signing -nsec3param 1 0 0 - retransfer3 > /dev/null 2>&1 || ret=1
+for i in 0 1 2 3 4 5 6 7 8 9
+do
+	ans=0
+	$DIG $DIGOPTS @10.53.0.3 nonexist.retransfer3 A > dig.out.ns3.pre.test$n || ret=1
+	grep "status: NXDOMAIN" dig.out.ns3.pre.test$n > /dev/null || ans=1
+	grep "NSEC3" dig.out.ns3.pre.test$n > /dev/null || ans=1
+	[ $ans = 0 ] && break
+	sleep 1
+done
+$RNDCCMD 10.53.0.3 retransfer retransfer3 2>&1 || ret=1
+for i in 0 1 2 3 4 5 6 7 8 9
+do
+	ans=0
+	$DIG $DIGOPTS @10.53.0.3 nonexist.retransfer3 A > dig.out.ns3.post.test$n || ret=1
+	grep "status: NXDOMAIN" dig.out.ns3.post.test$n > /dev/null || ans=1
+	grep "NSEC3" dig.out.ns3.post.test$n > /dev/null || ans=1
+	[ $ans = 0 ] && break
+	sleep 1
+done
+[ $ans = 1 ] && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+# NOTE: The test below should be considered fragile.  More details can be found
+# in the comment inside ns7/named.conf.
+n=$((n + 1))
+echo_i "check rndc retransfer of a inline nsec3 secondary does not trigger an infinite loop ($n)"
+ret=0
+zone=nsec3-loop
+# Add secondary zone using rndc
+$RNDCCMD 10.53.0.7 addzone $zone \
+	'{ type secondary; primaries { 10.53.0.2; }; file "'$zone'.db"; inline-signing yes; auto-dnssec maintain; };' || ret=1
+# Wait until secondary zone is fully signed using NSEC
+for i in 1 2 3 4 5 6 7 8 9 0
+do
+	ret=1
+	$RNDCCMD 10.53.0.7 signing -list $zone > signing.out.test$n 2>&1 || ret=1
+	keys=$(grep '^Done signing' signing.out.test$n | wc -l)
+	[ $keys -eq 3 ] && ret=0 && break
+	sleep 1
+done
+# Switch secondary zone to NSEC3
+$RNDCCMD 10.53.0.7 signing -nsec3param 1 0 2 12345678 $zone > /dev/null 2>&1 || ret=1
+# Wait until secondary zone is fully signed using NSEC3
+for i in 1 2 3 4 5 6 7 8 9 0
+do
+	ret=1
+	nsec3param=$($DIG $DIGOPTS +nodnssec +short @10.53.0.7 nsec3param $zone) || ret=1
+	test "$nsec3param" = "1 0 2 12345678" && ret=0 && break
+	sleep 1
+done
+# Attempt to retransfer the secondary zone from primary
+$RNDCCMD 10.53.0.7 retransfer $zone || ret=1
+# Check whether the signer managed to fully sign the retransferred zone by
+# waiting for a specific SOA serial number to appear in the logs; if this
+# specific SOA serial number does not appear in the logs, it means the signer
+# has either ran into an infinite loop or crashed; note that we check the logs
+# instead of sending SOA queries to the signer as these may influence its
+# behavior in a way which may prevent the desired scenario from being
+# reproduced (see comment in ns7/named.conf)
+for i in 1 2 3 4 5 6 7 8 9 0
+do
+	ret=1
+	{ grep "ns2.$zone. . 10 20 20 1814400 3600" ns7/named.run > /dev/null 2>&1; rc=$?; } || true
+	[ $rc -eq 0 ] && ret=0 && break
+	sleep 1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "stop bump in the wire signer server ($n)"
+ret=0
+stop_server ns3 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+echo_i "update SOA record while stopped"
+cp ns3/primary4.db.in ns3/primary.db
+rm -f ns3/primary.db.jnl
+
+n=$((n + 1))
+echo_i "restart bump in the wire signer server ($n)"
+ret=0
+start_server --noclean --restart --port ${PORT} ns3 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "updates to SOA parameters other than serial while stopped are reflected in signed zone ($n)"
+ret=0
+for i in 1 2 3 4 5 6 7 8 9
+do
+	ans=0
+	$DIG $DIGOPTS @10.53.0.3 primary SOA > dig.out.ns3.test$n || ret=1
+	grep "hostmaster" dig.out.ns3.test$n > /dev/null || ans=1
+	grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || ans=1
+	[ $ans = 1 ] || break
+	sleep 1
+done
+[ $ans = 0 ] || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "check that reloading all zones does not cause zone maintenance to cease for inline-signed zones ($n)"
+ret=1
+# Ensure "rndc reload" attempts to load ns3/primary.db by waiting 1 second so
+# that the file modification time has no possibility of being equal to
+# the one stored during server startup.
+sleep 1
+nextpart ns3/named.run > /dev/null
+cp ns3/primary5.db.in ns3/primary.db
+rndc_reload ns3 10.53.0.3
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+	if nextpart ns3/named.run | grep "zone primary.*sending notifies" > /dev/null; then
+		ret=0
+		break
+	fi
+	sleep 1
+done
+# Sanity check: file updates should be reflected in the signed zone,
+# i.e. SOA RNAME should no longer be set to "hostmaster".
+$DIG $DIGOPTS @10.53.0.3 primary SOA > dig.out.ns3.test$n || ret=1
+grep "hostmaster" dig.out.ns3.test$n > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "check that reloading errors prevent synchronization ($n)"
+ret=1
+$DIG $DIGOPTS +short @10.53.0.3 primary SOA > dig.out.ns3.test$n.1 || ret=1
+sleep 1
+nextpart ns3/named.run > /dev/null
+cp ns3/primary6.db.in ns3/primary.db
+rndc_reload ns3 10.53.0.3
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+	if nextpart ns3/named.run | grep "not loaded due to errors" > /dev/null
+        then
+		ret=0
+		break
+	fi
+	sleep 1
+done
+# Sanity check: the SOA record should be unchanged
+$DIG $DIGOPTS +short @10.53.0.3 primary SOA | grep -v '^;' > dig.out.ns3.test$n.2
+diff dig.out.ns3.test$n.1  dig.out.ns3.test$n.2 > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "check inline-signing with an include file ($n)"
+ret=0
+$DIG $DIGOPTS +short @10.53.0.3 primary SOA > dig.out.ns3.test$n.1 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+sleep 1
+nextpart ns3/named.run > /dev/null
+cp ns3/primary7.db.in ns3/primary.db
+rndc_reload ns3 10.53.0.3
+_includefile_loaded() {
+	$DIG $DIGOPTS @10.53.0.3 f.primary A > dig.out.ns3.test$n || return 1
+	grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || return 1
+	grep "ANSWER: 2," dig.out.ns3.test$n > /dev/null || return 1
+	grep "10\.0\.0\.7" dig.out.ns3.test$n > /dev/null || return 1
+	return 0
+}
+retry_quiet 10 _includefile_loaded
+# Sanity check: the SOA record should be changed
+$DIG $DIGOPTS +short @10.53.0.3 primary SOA | grep -v '^;' > dig.out.ns3.test$n.2
+diff dig.out.ns3.test$n.1  dig.out.ns3.test$n.2 > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "test add/del zone combinations ($n)"
+ret=0
+for zone in a b c d e f g h i j k l m n o p q r s t u v w x y z
+do
+$RNDCCMD 10.53.0.2 addzone test-$zone \
+	'{ type primary; file "bits.db.in"; allow-transfer { any; }; };' || ret=1
+$DIG $DIGOPTS @10.53.0.2 test-$zone SOA > dig.out.ns2.$zone.test$n || ret=1
+grep "status: NOERROR," dig.out.ns2.$zone.test$n  > /dev/null || { ret=1; cat dig.out.ns2.$zone.test$n; }
+$RNDCCMD 10.53.0.3 addzone test-$zone \
+	'{ type secondary; primaries { 10.53.0.2; }; file "'test-$zone.bk'"; inline-signing yes; auto-dnssec maintain; allow-transfer { any; }; };' || ret=1
+$RNDCCMD 10.53.0.3 delzone test-$zone > /dev/null 2>&1 || ret=1
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "testing adding external keys to a inline zone ($n)"
+ret=0
+$DIG $DIGOPTS @10.53.0.3 dnskey externalkey > dig.out.ns3.test$n || ret=1
+for alg in ${DEFAULT_ALGORITHM_NUMBER} ${ALTERNATIVE_ALGORITHM_NUMBER}
+do
+   [ $alg = 13 -a ! -f checkecdsa ] && continue;
+
+   case $alg in
+   7) echo_i "checking NSEC3RSASHA1";;
+   8) echo_i "checking RSASHA256";;
+   13) echo_i "checking ECDSAP256SHA256";;
+   *) echo_i "checking $alg";;
+   esac
+
+   dnskeys=$(grep "IN.DNSKEY.25[67] [0-9]* $alg " dig.out.ns3.test$n | wc -l)
+   rrsigs=$(grep "RRSIG.DNSKEY $alg " dig.out.ns3.test$n | wc -l)
+   test ${dnskeys:-0} -eq 3 || { echo_i "failed $alg (dnskeys ${dnskeys:-0})"; ret=1; }
+   test ${rrsigs:-0} -eq 2 || { echo_i "failed $alg (rrsigs ${rrsigs:-0})"; ret=1; }
+done
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "testing imported key won't overwrite a private key ($n)"
+ret=0
+key=$($KEYGEN -q -a ${DEFAULT_ALGORITHM} import.example)
+cp ${key}.key import.key
+# import should fail
+$IMPORTKEY -f import.key import.example > /dev/null 2>&1 && ret=1
+rm -f ${key}.private
+# private key removed; import should now succeed
+$IMPORTKEY -f import.key import.example > /dev/null 2>&1 || ret=1
+# now that it's an external key, re-import should succeed
+$IMPORTKEY -f import.key import.example > /dev/null 2>&1 || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "testing updating inline secure serial via 'rndc signing -serial' ($n)"
+ret=0
+$DIG $DIGOPTS nsec3. SOA @10.53.0.3 > dig.out.n3.pre.test$n || ret=1
+newserial=$($PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] + 10) if ($field[3] eq "SOA"); }' < dig.out.n3.pre.test$n)
+$RNDCCMD 10.53.0.3 signing -serial ${newserial:-0} nsec3 > /dev/null 2>&1 || ret=1
+retry_quiet 5 wait_for_serial 10.53.0.3 nsec3. "${newserial:-0}" dig.out.ns3.post.test$n || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "testing updating inline secure serial via 'rndc signing -serial' with negative change ($n)"
+ret=0
+$DIG $DIGOPTS nsec3. SOA @10.53.0.3 > dig.out.n3.pre.test$n || ret=1
+oldserial=$(awk '$4 == "SOA" { print $7 }' dig.out.n3.pre.test$n)
+newserial=$($PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] - 10) if ($field[3] eq "SOA"); }' < dig.out.n3.pre.test$n)
+$RNDCCMD 10.53.0.3 signing -serial ${newserial:-0} nsec3 > /dev/null 2>&1 || ret=1
+sleep 1
+$DIG $DIGOPTS nsec3. SOA @10.53.0.3 > dig.out.ns3.post.test$n || ret=1
+serial=$(awk '$4 == "SOA" { print $7 }' dig.out.ns3.post.test$n)
+[ ${oldserial:-0} -eq ${serial:-1} ] || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+#
+# Freezing only operates on the raw zone.
+#
+n=$((n + 1))
+echo_i "testing updating inline secure serial via 'rndc signing -serial' when frozen ($n)"
+ret=0
+$DIG $DIGOPTS nsec3. SOA @10.53.0.3 > dig.out.n3.pre.test$n || ret=1
+oldserial=$(awk '$4 == "SOA" { print $7 }' dig.out.n3.pre.test$n)
+newserial=$($PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] + 10) if ($field[3] eq "SOA"); }' < dig.out.n3.pre.test$n)
+$RNDCCMD 10.53.0.3 freeze nsec3 > /dev/null 2>&1 || ret=1
+$RNDCCMD 10.53.0.3 signing -serial ${newserial:-0} nsec3 > /dev/null 2>&1 || ret=1
+$RNDCCMD 10.53.0.3 thaw nsec3 > /dev/null 2>&1 || ret=1
+retry_quiet 5 wait_for_serial 10.53.0.3 nsec3. "${newserial:-0}" dig.out.ns3.post1.test$n || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "testing updating dynamic serial via 'rndc signing -serial' ($n)"
+ret=0
+$DIG $DIGOPTS bits. SOA @10.53.0.2 > dig.out.ns2.pre.test$n || ret=1
+newserial=$($PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] + 10) if ($field[3] eq "SOA"); }' < dig.out.ns2.pre.test$n)
+$RNDCCMD 10.53.0.2 signing -serial ${newserial:-0} bits > /dev/null 2>&1 || ret=1
+retry_quiet 5 wait_for_serial 10.53.0.2 bits. "${newserial:-0}" dig.out.ns2.post.test$n || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "testing updating dynamic serial via 'rndc signing -serial' with negative change ($n)"
+ret=0
+$DIG $DIGOPTS bits. SOA @10.53.0.2 > dig.out.ns2.pre.test$n || ret=1
+oldserial=$(awk '$4 == "SOA" { print $7 }' dig.out.ns2.pre.test$n)
+newserial=$($PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] - 10) if ($field[3] eq "SOA"); }' < dig.out.ns2.pre.test$n)
+$RNDCCMD 10.53.0.2 signing -serial ${newserial:-0} bits > /dev/null 2>&1 || ret=1
+retry_quiet 5 wait_for_serial 10.53.0.2 bits. "${newserial:-1}" dig.out.ns2.post1.test$n && ret=1
+retry_quiet 5 wait_for_serial 10.53.0.2 bits. "${oldserial:-1}" dig.out.ns2.post2.test$n || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "testing updating dynamic serial via 'rndc signing -serial' when frozen ($n)"
+ret=0
+$DIG $DIGOPTS bits. SOA @10.53.0.2 > dig.out.ns2.pre.test$n || ret=1
+oldserial=$(awk '$4 == "SOA" { print $7 }' dig.out.ns2.pre.test$n)
+newserial=$($PERL -e 'while (<>) { chomp; my @field = split /\s+/; printf("%u\n", $field[6] + 10) if ($field[3] eq "SOA"); }' < dig.out.ns2.pre.test$n)
+$RNDCCMD 10.53.0.2 freeze bits > /dev/null 2>&1 || ret=1
+$RNDCCMD 10.53.0.2 signing -serial ${newserial:-0} bits > /dev/null 2>&1 && ret=1
+$RNDCCMD 10.53.0.2 thaw bits > /dev/null 2>&1 || ret=1
+retry_quiet 5 wait_for_serial 10.53.0.2 bits. "${newserial:-1}" dig.out.ns2.post1.test$n && ret=1
+retry_quiet 5 wait_for_serial 10.53.0.2 bits. "${oldserial:-1}" dig.out.ns2.post2.test$n || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "testing that inline signing works with inactive ZSK and active KSK ($n)"
+ret=0
+
+$DIG $DIGOPTS @10.53.0.3 soa inactivezsk  > dig.out.ns3.pre.test$n || ret=1
+soa1=$(awk '$4 == "SOA" { print $7 }' dig.out.ns3.pre.test$n)
+
+$NSUPDATE << EOF || ret=1
+server 10.53.0.2 ${PORT}
+update add added.inactivezsk 0 IN TXT added record
+send
+EOF
+
+for i in 1 2 3 4 5 6 7 8 9 10
+do
+    $DIG $DIGOPTS @10.53.0.3 soa inactivezsk  > dig.out.ns3.post.test$n || ret=1
+    soa2=$(awk '$4 == "SOA" { print $7 }' dig.out.ns3.post.test$n)
+    test ${soa1:-0} -ne ${soa2:-0} && break
+    sleep 1
+done
+test ${soa1:-0} -ne ${soa2:-0} || ret=1
+
+$DIG $DIGOPTS @10.53.0.3 txt added.inactivezsk > dig.out.ns3.test$n || ret=1
+grep "ANSWER: 3," dig.out.ns3.test$n > /dev/null || ret=1
+grep "RRSIG" dig.out.ns3.test$n > /dev/null || ret=1
+grep "TXT ${DEFAULT_ALGORITHM_NUMBER} 2" dig.out.ns3.test$n > /dev/null || ret=1
+grep "TXT ${ALTERNATIVE_ALGORITHM_NUMBER} 2" dig.out.ns3.test$n > /dev/null || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "testing that inline signing works with inactive KSK and active ZSK ($n)"
+ret=0
+
+$DIG $DIGOPTS @10.53.0.3 axfr inactiveksk > dig.out.ns3.test$n || ret=1
+
+#
+#  check that DNSKEY is signed with ZSK for default algorithm
+#
+awk='$4 == "DNSKEY" && $5 == 256 && $7 == alg { print }'
+zskid=$(awk -v alg=${DEFAULT_ALGORITHM_NUMBER} "${awk}" dig.out.ns3.test$n |
+       $DSFROMKEY -A -2 -f - inactiveksk | awk '{ print $4}' )
+grep "DNSKEY ${DEFAULT_ALGORITHM_NUMBER} 1 [0-9]* [0-9]* [0-9]* ${zskid} " dig.out.ns3.test$n > /dev/null || ret=1
+awk='$4 == "DNSKEY" && $5 == 257 && $7 == alg { print }'
+kskid=$(awk -v alg=${DEFAULT_ALGORITHM_NUMBER} "${awk}" dig.out.ns3.test$n |
+       $DSFROMKEY -2 -f - inactiveksk | awk '{ print $4}' )
+grep "DNSKEY ${DEFAULT_ALGORITHM_NUMBER} 1 [0-9]* [0-9]* [0-9]* ${kskid} " dig.out.ns3.test$n > /dev/null && ret=1
+
+#
+#  check that DNSKEY is signed with KSK for alternative algorithm
+#
+awk='$4 == "DNSKEY" && $5 == 256 && $7 == alg { print }'
+zskid=$(awk -v alg=${ALTERNATIVE_ALGORITHM_NUMBER} "${awk}" dig.out.ns3.test$n |
+       $DSFROMKEY -A -2 -f - inactiveksk | awk '{ print $4}' )
+grep "DNSKEY ${ALTERNATIVE_ALGORITHM_NUMBER} 1 [0-9]* [0-9]* [0-9]* ${zskid} " dig.out.ns3.test$n > /dev/null && ret=1
+awk='$4 == "DNSKEY" && $5 == 257 && $7 == alg { print }'
+kskid=$(awk  -v alg=${ALTERNATIVE_ALGORITHM_NUMBER} "${awk}" dig.out.ns3.test$n |
+       $DSFROMKEY -2 -f - inactiveksk | awk '{ print $4}' )
+grep "DNSKEY ${ALTERNATIVE_ALGORITHM_NUMBER} 1 [0-9]* [0-9]* [0-9]* ${kskid} " dig.out.ns3.test$n > /dev/null || ret=1
+
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+# Wait until an update to the raw part of a given inline signed zone is fully
+# processed.  As waiting for a fixed amount of time is suboptimal and there is
+# no single message that would signify both a successful modification and an
+# error in a race-free manner, instead wait until either notifies are sent
+# (which means the secure zone was modified) or a receive_secure_serial() error
+# is logged (which means the zone was not modified and will not be modified any
+# further in response to the relevant raw zone update).
+wait_until_raw_zone_update_is_processed() {
+	zone="$1"
+	for i in 1 2 3 4 5 6 7 8 9 10
+	do
+		if nextpart ns3/named.run | grep -E "zone ${zone}.*(sending notifies|receive_secure_serial)" > /dev/null; then
+			return
+		fi
+		sleep 1
+	done
+}
+
+n=$((n + 1))
+echo_i "checking that changes to raw zone are applied to a previously unsigned secure zone ($n)"
+ret=0
+# Query for bar.nokeys/A and ensure the response is negative.  As this zone
+# does not have any signing keys set up, the response must be unsigned.
+$DIG $DIGOPTS @10.53.0.3 bar.nokeys. A > dig.out.ns3.pre.test$n 2>&1 || ret=1
+grep "status: NOERROR" dig.out.ns3.pre.test$n > /dev/null && ret=1
+grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null && ret=1
+# Ensure the wait_until_raw_zone_update_is_processed() call below will ignore
+# log messages generated before the raw zone is updated.
+nextpart ns3/named.run > /dev/null
+# Add a record to the raw zone on the primary.
+$NSUPDATE << EOF || ret=1
+zone nokeys.
+server 10.53.0.2 ${PORT}
+update add bar.nokeys. 0 A 127.0.0.1
+send
+EOF
+wait_until_raw_zone_update_is_processed "nokeys"
+# Query for bar.nokeys/A again and ensure the signer now returns a positive,
+# yet still unsigned response.
+$DIG $DIGOPTS @10.53.0.3 bar.nokeys. A > dig.out.ns3.post.test$n 2>&1 || ret=1
+grep "status: NOERROR" dig.out.ns3.post.test$n > /dev/null || ret=1
+grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that changes to raw zone are not applied to a previously signed secure zone with no keys available (primary) ($n)"
+ret=0
+# Query for bar.removedkeys-primary/A and ensure the response is negative.  As
+# this zone has signing keys set up, the response must be signed.
+$DIG $DIGOPTS @10.53.0.3 bar.removedkeys-primary. A > dig.out.ns3.pre.test$n 2>&1 || ret=1
+grep "status: NOERROR" dig.out.ns3.pre.test$n > /dev/null && ret=1
+grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null || ret=1
+# Remove the signing keys for this zone.
+mv -f ns3/Kremovedkeys-primary* ns3/removedkeys
+# Ensure the wait_until_raw_zone_update_is_processed() call below will ignore
+# log messages generated before the raw zone is updated.
+nextpart ns3/named.run > /dev/null
+# Add a record to the raw zone on the primary.
+$NSUPDATE << EOF || ret=1
+zone removedkeys-primary.
+server 10.53.0.3 ${PORT}
+update add bar.removedkeys-primary. 0 A 127.0.0.1
+send
+EOF
+wait_until_raw_zone_update_is_processed "removedkeys-primary"
+# Query for bar.removedkeys-primary/A again and ensure the signer still returns
+# a negative, signed response.
+$DIG $DIGOPTS @10.53.0.3 bar.removedkeys-primary. A > dig.out.ns3.post.test$n 2>&1 || ret=1
+grep "status: NOERROR" dig.out.ns3.post.test$n > /dev/null && ret=1
+grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that backlogged changes to raw zone are applied after keys become available (primary) ($n)"
+ret=0
+# Restore the signing keys for this zone.
+mv ns3/removedkeys/Kremovedkeys-primary* ns3
+$RNDCCMD 10.53.0.3 loadkeys removedkeys-primary > /dev/null 2>&1 || ret=1
+# Determine what a SOA record with a bumped serial number should look like.
+BUMPED_SOA=$(sed -n 's/.*\(add removedkeys-primary.*IN.*SOA\)/\1/p;' ns3/named.run | tail -1 | awk '{$8 += 1; print $0}')
+# Ensure the wait_until_raw_zone_update_is_processed() call below will ignore
+# log messages generated before the raw zone is updated.
+nextpart ns3/named.run > /dev/null
+# Bump the SOA serial number of the raw zone.
+$NSUPDATE << EOF || ret=1
+zone removedkeys-primary.
+server 10.53.0.3 ${PORT}
+update del removedkeys-primary. SOA
+update ${BUMPED_SOA}
+send
+EOF
+wait_until_raw_zone_update_is_processed "removedkeys-primary"
+# Query for bar.removedkeys-primary/A again and ensure the signer now returns a
+# positive, signed response.
+$DIG $DIGOPTS @10.53.0.3 bar.removedkeys-primary. A > dig.out.ns3.test$n 2>&1 || ret=1
+grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+grep "RRSIG" dig.out.ns3.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that changes to raw zone are not applied to a previously signed secure zone with no keys available (secondary) ($n)"
+ret=0
+# Query for bar.removedkeys-secondary/A and ensure the response is negative.  As this
+# zone does have signing keys set up, the response must be signed.
+$DIG $DIGOPTS @10.53.0.3 bar.removedkeys-secondary. A > dig.out.ns3.pre.test$n 2>&1 || ret=1
+grep "status: NOERROR" dig.out.ns3.pre.test$n > /dev/null && ret=1
+grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null || ret=1
+# Remove the signing keys for this zone.
+mv -f ns3/Kremovedkeys-secondary* ns3/removedkeys
+# Ensure the wait_until_raw_zone_update_is_processed() call below will ignore
+# log messages generated before the raw zone is updated.
+nextpart ns3/named.run > /dev/null
+# Add a record to the raw zone on the primary.
+$NSUPDATE << EOF || ret=1
+zone removedkeys-secondary.
+server 10.53.0.2 ${PORT}
+update add bar.removedkeys-secondary. 0 A 127.0.0.1
+send
+EOF
+wait_until_raw_zone_update_is_processed "removedkeys-secondary"
+# Query for bar.removedkeys-secondary/A again and ensure the signer still returns a
+# negative, signed response.
+$DIG $DIGOPTS @10.53.0.3 bar.removedkeys-secondary. A > dig.out.ns3.post.test$n 2>&1 || ret=1
+grep "status: NOERROR" dig.out.ns3.post.test$n > /dev/null && ret=1
+grep "RRSIG" dig.out.ns3.pre.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking that backlogged changes to raw zone are applied after keys become available (secondary) ($n)"
+ret=0
+# Restore the signing keys for this zone.
+mv ns3/removedkeys/Kremovedkeys-secondary* ns3
+$RNDCCMD 10.53.0.3 loadkeys removedkeys-secondary > /dev/null 2>&1 || ret=1
+# Determine what a SOA record with a bumped serial number should look like.
+BUMPED_SOA=$(sed -n 's/.*\(add removedkeys-secondary.*IN.*SOA\)/\1/p;' ns2/named.run | tail -1 | awk '{$8 += 1; print $0}')
+# Ensure the wait_until_raw_zone_update_is_processed() call below will ignore
+# log messages generated before the raw zone is updated.
+nextpart ns3/named.run > /dev/null
+# Bump the SOA serial number of the raw zone on the primary.
+$NSUPDATE << EOF || ret=1
+zone removedkeys-secondary.
+server 10.53.0.2 ${PORT}
+update del removedkeys-secondary. SOA
+update ${BUMPED_SOA}
+send
+EOF
+wait_until_raw_zone_update_is_processed "removedkeys-secondary"
+# Query for bar.removedkeys-secondary/A again and ensure the signer now returns
+# a positive, signed response.
+$DIG $DIGOPTS @10.53.0.3 bar.removedkeys-secondary. A > dig.out.ns3.test$n 2>&1 || ret=1
+grep "status: NOERROR" dig.out.ns3.test$n > /dev/null || ret=1
+grep "RRSIG" dig.out.ns3.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+# Check that the file $2 for zone $1 does not contain RRSIG records
+# while the journal file for that zone does contain them.
+ensure_sigs_only_in_journal() {
+	origin="$1"
+	masterfile="$2"
+	$CHECKZONE -i none -f raw -D -o - "$origin" "$masterfile" 2>&1 | grep -w RRSIG > /dev/null && ret=1
+	$CHECKZONE -j -i none -f raw -D -o - "$origin" "$masterfile" 2>&1 | grep -w RRSIG > /dev/null || ret=1
+}
+
+n=$((n + 1))
+echo_i "checking that records added from a journal are scheduled to be resigned ($n)"
+ret=0
+# Signing keys for the "delayedkeys" zone are not yet accessible.  Thus, the
+# zone file for the signed version of the zone will contain no DNSSEC records.
+# Move keys into place now and load them, which will cause DNSSEC records to
+# only be present in the journal for the signed version of the zone.
+mv Kdelayedkeys* ns3/
+$RNDCCMD 10.53.0.3 loadkeys delayedkeys > rndc.out.ns3.pre.test$n 2>&1 || ret=1
+# Wait until the zone is signed.
+check_done_signing () (
+    $RNDCCMD 10.53.0.3 signing -list delayedkeys > signing.out.test$n 2>&1 || true
+    num=$(grep "Done signing with" signing.out.test$n | wc -l)
+    [ $num -eq 2 ]
+)
+retry_quiet 10 check_done_signing || ret=1
+# Halt rather than stopping the server to prevent the file from being
+# flushed upon shutdown since we specifically want to avoid it.
+stop_server --use-rndc --halt --port ${CONTROLPORT} ns3 || ret=1
+ensure_sigs_only_in_journal delayedkeys ns3/delayedkeys.db.signed
+start_server --noclean --restart --port ${PORT} ns3 || ret=1
+# At this point, the raw zone journal will not have a source serial set.  Upon
+# server startup, receive_secure_serial() will rectify that, update SOA, resign
+# it, and schedule its future resign.  This will cause "rndc zonestatus" to
+# return delayedkeys/SOA as the next node to resign, so we restart the server
+# once again; with the raw zone journal now having a source serial set,
+# receive_secure_serial() should refrain from introducing any zone changes.
+stop_server --use-rndc --halt --port ${CONTROLPORT} ns3 || ret=1
+ensure_sigs_only_in_journal delayedkeys ns3/delayedkeys.db.signed
+nextpart ns3/named.run > /dev/null
+start_server --noclean --restart --port ${PORT} ns3 || ret=1
+# We can now test whether the secure zone journal was correctly processed:
+# unless the records contained in it were scheduled for resigning, no resigning
+# event will be scheduled at all since the secure zone file contains no
+# DNSSEC records.
+wait_for_log 20 "all zones loaded" ns3/named.run || ret=1
+$RNDCCMD 10.53.0.3 zonestatus delayedkeys > rndc.out.ns3.post.test$n 2>&1 || ret=1
+grep "next resign node:" rndc.out.ns3.post.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "check that zonestatus reports 'type: primary' for an inline primary zone ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 zonestatus primary > rndc.out.ns3.test$n || ret=1
+grep "type: primary" rndc.out.ns3.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "check that zonestatus reports 'type: secondary' for an inline secondary zone ($n)"
+ret=0
+$RNDCCMD 10.53.0.3 zonestatus bits > rndc.out.ns3.test$n || ret=1
+grep "type: secondary" rndc.out.ns3.test$n > /dev/null || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking reload of touched inline zones ($n)"
+ret=0
+echo_ic "pre-reload 'next key event'"
+nextpart ns8/named.run > nextpart.pre$n.out
+count=$(grep "zone example[0-9][0-9].com/IN (signed): next key event:" nextpart.pre$n.out | wc -l)
+echo_ic "found: $count/16"
+[ $count -eq 16 ] || ret=1
+echo_ic "touch and reload"
+touch ns8/example??.com.db
+$RNDCCMD 10.53.0.8 reload 2>&1 | sed 's/^/ns3 /' | cat_i
+sleep 5
+echo_ic "post-reload 'next key event'"
+nextpart ns8/named.run > nextpart.post$n.out
+count=$(grep "zone example[0-9][0-9].com/IN (signed): next key event:" nextpart.post$n.out | wc -l)
+echo_ic "found: $count/16"
+[ $count -eq 16 ] || ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n + 1))
+echo_i "checking second reload of touched inline zones ($n)"
+ret=0
+nextpart ns8/named.run > nextpart.pre$n.out
+$RNDCCMD 10.53.0.8 reload 2>&1 | sed 's/^/ns3 /' | cat_i
+sleep 5
+nextpart ns8/named.run > nextpart.post$n.out
+grep "ixfr-from-differences: unchanged" nextpart.post$n.out && ret=1
+if [ $ret != 0 ]; then echo_i "failed"; fi
+status=$((status + ret))
+
+n=$((n+1))
+echo_i "Check that 'rndc reload' of just the serial updates the signed instance ($n)"
+ret=0
+dig_with_opts @10.53.0.8 example SOA > dig.out.ns8.test$n.soa1 || ret=1
+cp ns8/example2.db.in ns8/example.db || ret=1
+nextpart ns8/named.run > /dev/null
+rndccmd 10.53.0.8 reload || ret=1
+wait_for_log 3 "all zones loaded" ns8/named.run
+sleep 1
+dig_with_opts @10.53.0.8 example SOA > dig.out.ns8.test$n.soa2 || ret=1
+soa1=$(awk '$4 == "SOA" { print $7 }' dig.out.ns8.test$n.soa1)
+soa2=$(awk '$4 == "SOA" { print $7 }' dig.out.ns8.test$n.soa2)
+ttl1=$(awk '$4 == "SOA" { print $2 }' dig.out.ns8.test$n.soa1)
+ttl2=$(awk '$4 == "SOA" { print $2 }' dig.out.ns8.test$n.soa2)
+test ${soa1:-1000} -lt ${soa2:-0} || ret=1
+test ${ttl1:-0} -eq 300 || ret=1
+test ${ttl2:-0} -eq 300 || ret=1
+test "$ret" -eq 0 || echo_i "failed"
+status=$((status+ret))
+
+n=$((n+1))
+echo_i "Check that restart with zone changes and deleted journal works ($n)"
+TSIG=
+ret=0
+dig_with_opts @10.53.0.8 example SOA > dig.out.ns8.test$n.soa1 || ret=1
+stop_server --use-rndc --port ${CONTROLPORT} ns8 || ret=1
+# TTL of all records change from 300 to 400
+cp ns8/example3.db.in ns8/example.db || ret=1
+rm -f ns8/example.db.jnl
+nextpart ns8/named.run > /dev/null
+start_server --noclean --restart --port ${PORT} ns8 || ret=1
+wait_for_log 3 "all zones loaded" ns8/named.run
+sleep 1
+dig_with_opts @10.53.0.8 example SOA > dig.out.ns8.test$n.soa2 || ret=1
+soa1=$(awk '$4 == "SOA" { print $7 }' dig.out.ns8.test$n.soa1)
+soa2=$(awk '$4 == "SOA" { print $7 }' dig.out.ns8.test$n.soa2)
+ttl1=$(awk '$4 == "SOA" { print $2 }' dig.out.ns8.test$n.soa1)
+ttl2=$(awk '$4 == "SOA" { print $2 }' dig.out.ns8.test$n.soa2)
+test ${soa1:-1000} -lt ${soa2:-0} || ret=1
+test ${ttl1:-0} -eq 300 || ret=1
+test ${ttl2:-0} -eq 400 || ret=1
+test "$ret" -eq 0 || echo_i "failed"
+status=$((status+ret))
+
+echo_i "exit status: $status"
+[ $status -eq 0 ] || exit 1
-- 
cgit v1.2.3