From 3b9b6d0b8e7f798023c9d109c490449d528fde80 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 17:59:48 +0200 Subject: Adding upstream version 1:9.18.19. Signed-off-by: Daniel Baumann --- bin/tests/system/nsupdate/tests.sh | 2262 ++++++++++++++++++++++++++++++++++++ 1 file changed, 2262 insertions(+) create mode 100755 bin/tests/system/nsupdate/tests.sh (limited to 'bin/tests/system/nsupdate/tests.sh') diff --git a/bin/tests/system/nsupdate/tests.sh b/bin/tests/system/nsupdate/tests.sh new file mode 100755 index 0000000..44830d4 --- /dev/null +++ b/bin/tests/system/nsupdate/tests.sh @@ -0,0 +1,2262 @@ +#!/bin/sh + +# Copyright (C) Internet Systems Consortium, Inc. ("ISC") +# +# SPDX-License-Identifier: MPL-2.0 +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, you can obtain one at https://mozilla.org/MPL/2.0/. +# +# See the COPYRIGHT file distributed with this work for additional +# information regarding copyright ownership. + +set -e + +. ../conf.sh + +DIGOPTS="-p ${PORT}" +RNDCCMD="$RNDC -c ../common/rndc.conf -p ${CONTROLPORT} -s" + +# +# Uncomment when creating credential cache files. +# +# KRB5_CONFIG="$(pwd)/krb/krb5.conf" +# +# Cd krb and run krb/setup.sh to create new keys. +# Run nsupdate system test. +# Kill the krb5kdc server started by krb/setup.sh. +# Check the expiry date on the cached machine.ccache with klist is in 2038. +# Comment out KRB5_CONFIG. +# Re-run nsupdate system test to confirm everything still works. +# git add and commit the resulting ns*/machine.ccache and ns*/dns.keytab files. +# Clean up krb. +# + +status=0 +n=0 + +nextpartreset ns3/named.run + +# wait for zone transfer to complete +tries=0 +while true; do + if [ $tries -eq 10 ] + then + exit 1 + fi + + if grep "example.nil/IN.*Transfer status" ns2/named.run > /dev/null + then + break + else + echo_i "zones are not fully loaded, waiting..." + tries=$((tries + 1)) + sleep 1 + fi +done + +has_positive_response() { + zone=$1 + type=$2 + ns=$3 + $DIG $DIGOPTS +tcp +norec $zone $type @$ns > dig.out.post.test$n || return 1 + grep "status: NOERROR" dig.out.post.test$n > /dev/null || return 1 + grep "ANSWER: 0," dig.out.post.test$n > /dev/null && return 1 + return 0 +} + +ret=0 +echo_i "fetching first copy of zone before update" +$DIG $DIGOPTS +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd example.nil.\ + @10.53.0.1 axfr > dig.out.ns1 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +ret=0 +echo_i "fetching second copy of zone before update" +$DIG $DIGOPTS +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd example.nil.\ + @10.53.0.2 axfr > dig.out.ns2 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +ret=0 +echo_i "comparing pre-update copies to known good data" +digcomp knowngood.ns1.before dig.out.ns1 || ret=1 +digcomp knowngood.ns1.before dig.out.ns2 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +ret=0 +echo_i "ensure an unrelated zone is mentioned in its NOTAUTH log" +$NSUPDATE -k ns1/ddns.key > nsupdate.out 2>&1 << END && ret=1 +server 10.53.0.1 ${PORT} +zone unconfigured.test +update add unconfigured.test 600 IN A 10.53.0.1 +send +END +grep NOTAUTH nsupdate.out > /dev/null 2>&1 || ret=1 +grep ' unconfigured.test: not authoritative' ns1/named.run \ + > /dev/null 2>&1 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +ret=0 +echo_i "ensure a subdomain is mentioned in its NOTAUTH log" +$NSUPDATE -k ns1/ddns.key > nsupdate.out 2>&1 << END && ret=1 +server 10.53.0.1 ${PORT} +zone sub.sub.example.nil +update add sub.sub.sub.example.nil 600 IN A 10.53.0.1 +send +END +grep NOTAUTH nsupdate.out > /dev/null 2>&1 || ret=1 +grep ' sub.sub.example.nil: not authoritative' ns1/named.run \ + > /dev/null 2>&1 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +ret=0 +echo_i "updating zone" +# nsupdate will print a ">" prompt to stdout as it gets each input line. +$NSUPDATE -k ns1/ddns.key < /dev/null || ret=1 +server 10.53.0.1 ${PORT} +update add updated.example.nil. 600 A 10.10.10.1 +add updated.example.nil. 600 TXT Foo +delete t.example.nil. + +END +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +echo_i "sleeping 5 seconds for server to incorporate changes" +sleep 5 + +ret=0 +echo_i "fetching first copy of zone after update" +$DIG $DIGOPTS +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd example.nil.\ + @10.53.0.1 axfr > dig.out.ns1 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +ret=0 +echo_i "fetching second copy of zone after update" +$DIG $DIGOPTS +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd example.nil.\ + @10.53.0.2 axfr > dig.out.ns2 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +ret=0 +echo_i "comparing post-update copies to known good data" +digcomp knowngood.ns1.after dig.out.ns1 || ret=1 +digcomp knowngood.ns1.after dig.out.ns2 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +ret=0 +echo_i "testing local update policy" +pre=$($DIG $DIGOPTS +short new.other.nil. @10.53.0.1 a) || ret=1 +[ -z "$pre" ] || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +ret=0 +echo_i "updating zone" +# nsupdate will print a ">" prompt to stdout as it gets each input line. +$NSUPDATE -4 -l -p ${PORT} -k ns1/session.key > /dev/null < nsupdate.out 2>&1 << END && ret=1 +update add other.nil. 600 in ns ns3.other.nil. +send +END +grep REFUSED nsupdate.out > /dev/null 2>&1 || ret=1 +# ...but should work if an A record is inserted first: +$NSUPDATE -4 -l -p ${PORT} -k ns1/session.key > nsupdate.out 2>&1 << END || ret=1 +update add ns4.other.nil 600 in a 10.53.0.1 +send +update add other.nil. 600 in ns ns4.other.nil. +send +END +grep REFUSED nsupdate.out > /dev/null 2>&1 && ret=1 +# ...or if an AAAA record does: +$NSUPDATE -4 -l -p ${PORT} -k ns1/session.key > nsupdate.out 2>&1 << END || ret=1 +update add ns5.other.nil 600 in aaaa 2001:db8::1 +send +update add other.nil. 600 in ns ns5.other.nil. +send +END +grep REFUSED nsupdate.out > /dev/null 2>&1 && ret=1 +# ...or if the NS and A/AAAA are inserted together: +$NSUPDATE -4 -l -p ${PORT} -k ns1/session.key > nsupdate.out 2>&1 << END || ret=1 +update add other.nil. 600 in ns ns6.other.nil. +update add ns6.other.nil 600 in a 10.53.0.1 +send +END +grep REFUSED nsupdate.out > /dev/null 2>&1 && ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +echo_i "sleeping 5 seconds for server to incorporate changes" +sleep 5 + +ret=0 +echo_i "checking result of update" +$DIG $DIGOPTS +short @10.53.0.1 ns other.nil > dig.out.ns1 || ret=1 +grep ns3.other.nil dig.out.ns1 > /dev/null 2>&1 && ret=1 +grep ns4.other.nil dig.out.ns1 > /dev/null 2>&1 || ret=1 +grep ns5.other.nil dig.out.ns1 > /dev/null 2>&1 || ret=1 +grep ns6.other.nil dig.out.ns1 > /dev/null 2>&1 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +ret=0 +echo_i "ensure 'check-mx ignore' allows adding MX records containing an address without a warning" +$NSUPDATE -k ns1/ddns.key > nsupdate.out 2>&1 << END || ret=1 +server 10.53.0.1 ${PORT} +update add mx03.example.nil 600 IN MX 10 10.53.0.1 +send +END +grep REFUSED nsupdate.out > /dev/null 2>&1 && ret=1 +grep "mx03.example.nil/MX:.*MX is an address" ns1/named.run > /dev/null 2>&1 && ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +ret=0 +echo_i "ensure 'check-mx warn' allows adding MX records containing an address with a warning" +$NSUPDATE -4 -l -p ${PORT} -k ns1/session.key > nsupdate.out 2>&1 << END || ret=1 +update add mx03.other.nil 600 IN MX 10 10.53.0.1 +send +END +grep REFUSED nsupdate.out > /dev/null 2>&1 && ret=1 +grep "mx03.other.nil/MX:.*MX is an address" ns1/named.run > /dev/null 2>&1 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +ret=0 +echo_i "ensure 'check-mx fail' prevents adding MX records containing an address with a warning" +$NSUPDATE > nsupdate.out 2>&1 << END && ret=1 +server 10.53.0.1 ${PORT} +update add mx03.update.nil 600 IN MX 10 10.53.0.1 +send +END +grep REFUSED nsupdate.out > /dev/null 2>&1 || ret=1 +grep "mx03.update.nil/MX:.*MX is an address" ns1/named.run > /dev/null 2>&1 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +ret=0 +echo_i "check SIG(0) key is accepted" +key=$($KEYGEN -q -a ${DEFAULT_ALGORITHM} -T KEY -n ENTITY xxx) +echo "" | $NSUPDATE -k ${key}.private > /dev/null 2>&1 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check TYPE=0 update is rejected by nsupdate ($n)" +$NSUPDATE < nsupdate.out 2>&1 && ret=1 + server 10.53.0.1 ${PORT} + ttl 300 + update add example.nil. in type0 "" + send +END +grep "unknown class/type" nsupdate.out > /dev/null 2>&1 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check TYPE=0 prerequisite is handled ($n)" +$NSUPDATE -k ns1/ddns.key < nsupdate.out 2>&1 || ret=1 + server 10.53.0.1 ${PORT} + prereq nxrrset example.nil. type0 + send +END +$DIG $DIGOPTS +tcp version.bind txt ch @10.53.0.1 > dig.out.ns1.$n +grep "status: NOERROR" dig.out.ns1.$n > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check that TYPE=0 update is handled ($n)" +echo "a0e4280000010000000100000000060001c00c000000fe000000000000" | +$PERL ../packet.pl -a 10.53.0.1 -p ${PORT} -t tcp > /dev/null || ret=1 +$DIG $DIGOPTS +tcp version.bind txt ch @10.53.0.1 > dig.out.ns1.$n +grep "status: NOERROR" dig.out.ns1.$n > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check that TYPE=0 additional data is handled ($n)" +echo "a0e4280000010000000000010000060001c00c000000fe000000000000" | +$PERL ../packet.pl -a 10.53.0.1 -p ${PORT} -t tcp > /dev/null || ret=1 +$DIG $DIGOPTS +tcp version.bind txt ch @10.53.0.1 > dig.out.ns1.$n +grep "status: NOERROR" dig.out.ns1.$n > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check that update to undefined class is handled ($n)" +echo "a0e4280000010001000000000000060101c00c000000fe000000000000" | +$PERL ../packet.pl -a 10.53.0.1 -p ${PORT} -t tcp > /dev/null || ret=1 +$DIG $DIGOPTS +tcp version.bind txt ch @10.53.0.1 > dig.out.ns1.$n +grep "status: NOERROR" dig.out.ns1.$n > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check that address family mismatch is handled ($n)" +$NSUPDATE < /dev/null 2>&1 && ret=1 +server ::1 +local 127.0.0.1 +update add 600 txt.example.nil in txt "test" +send +END +[ $ret = 0 ] || { echo_i "failed"; status=1; } + + +n=$((n + 1)) +ret=0 +echo_i "check that unixtime serial number is correctly generated ($n)" +$DIG $DIGOPTS +short unixtime.nil. soa @10.53.0.1 > dig.out.old.test$n || ret=1 +oldserial=$(awk '{print $3}' dig.out.old.test$n) || ret=1 +start=$($PERL -e 'print time()."\n";') +$NSUPDATE < /dev/null 2>&1 || ret=1 + server 10.53.0.1 ${PORT} + ttl 600 + update add new.unixtime.nil in a 1.2.3.4 + send +END +now=$($PERL -e 'print time()."\n";') +sleep 1 +$DIG $DIGOPTS +short unixtime.nil. soa @10.53.0.1 > dig.out.new.test$n || ret=1 +serial=$(awk '{print $3}' dig.out.new.test$n) || ret=1 +[ "$oldserial" = "$serial" ] && { echo_i "oldserial == serial"; ret=1; } +if [ "$serial" -lt "$start" ]; then + echo_i "out-of-range serial=$serial < start=$start"; ret=1; +elif [ "$serial" -gt "$now" ]; then + echo_i "out-of-range serial=$serial > now=$now"; ret=1; +fi +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +if $PERL -e 'use Net::DNS;' 2>/dev/null +then + n=$((n + 1)) + ret=0 + echo_i "running update.pl test ($n)" + $PERL update_test.pl -s 10.53.0.1 -p ${PORT} update.nil. > perl.update_test.out || ret=1 + [ $ret -eq 1 ] && { echo_i "failed"; status=1; } + + if $PERL -e 'use Net::DNS; die "Net::DNS too old ($Net::DNS::VERSION < 1.01)" if ($Net::DNS::VERSION < 1.01)' > /dev/null + then + n=$((n + 1)) + ret=0 + echo_i "check for too many NSEC3 iterations log ($n)" + grep "updating zone 'update.nil/IN': too many NSEC3 iterations (151)" ns1/named.run > /dev/null || ret=1 + [ $ret -eq 1 ] && { echo_i "failed"; status=1; } + fi +else + echo_i "The second part of this test requires the Net::DNS library." >&2 +fi + +n=$((n + 1)) +ret=0 +echo_i "fetching first copy of test zone ($n)" +$DIG $DIGOPTS +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd example.nil.\ + @10.53.0.1 axfr > dig.out.ns1 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "fetching second copy of test zone ($n)" +$DIG $DIGOPTS +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd example.nil.\ + @10.53.0.2 axfr > dig.out.ns2 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "comparing zones ($n)" +digcomp dig.out.ns1 dig.out.ns2 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +echo_i "SIGKILL and restart server ns1" +cd ns1 +kill -KILL $(cat named.pid) +rm named.pid +cd .. +sleep 10 +if + start_server --noclean --restart --port ${PORT} ns1 +then + echo_i "restarted server ns1" +else + echo_i "could not restart server ns1" + exit 1 +fi +sleep 10 + +n=$((n + 1)) +ret=0 +echo_i "fetching ns1 after hard restart ($n)" +$DIG $DIGOPTS +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd example.nil.\ + @10.53.0.1 axfr > dig.out.ns1.after || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "comparing zones ($n)" +digcomp dig.out.ns1 dig.out.ns1.after || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +echo_i "begin RT #482 regression test" + +n=$((n + 1)) +ret=0 +echo_i "update primary ($n)" +$NSUPDATE -k ns1/ddns.key < /dev/null || ret=1 +server 10.53.0.1 ${PORT} +update add updated2.example.nil. 600 A 10.10.10.2 +update add updated2.example.nil. 600 TXT Bar +update delete c.example.nil. +send +END +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +sleep 5 + +echo_i "SIGHUP secondary" +kill -HUP $(cat ns2/named.pid) + +sleep 5 + +n=$((n + 1)) +ret=0 +echo_i "update primary again ($n)" +$NSUPDATE -k ns1/ddns.key < /dev/null || ret=1 +server 10.53.0.1 ${PORT} +update add updated3.example.nil. 600 A 10.10.10.3 +update add updated3.example.nil. 600 TXT Zap +del d.example.nil. +send +END +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +sleep 5 + +echo_i "SIGHUP secondary again" +kill -HUP $(cat ns2/named.pid) + +sleep 5 + +n=$((n + 1)) +echo_i "check to 'out of sync' message ($n)" +if grep "out of sync" ns2/named.run +then + echo_i "failed (found 'out of sync')" + status=1 +fi + +echo_i "end RT #482 regression test" + +n=$((n + 1)) +ret=0 +echo_i "remove nonexistent PTR record ($n)" +$NSUPDATE -k ns1/ddns.key -d << EOF > nsupdate.out.test$n 2>&1 || ret=1 +server 10.53.0.1 ${PORT} +zone example.nil. +update delete nonexistent.example.nil. 0 IN PTR foo. +send +EOF +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "remove nonexistent SRV record ($n)" +$NSUPDATE -k ns1/ddns.key -d << EOF > nsupdate.out.test$n 2>&1 || ret=1 +server 10.53.0.1 ${PORT} +zone example.nil. +update delete nonexistent.example.nil. 0 IN SRV 0 0 0 foo. +send +EOF +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "start NSEC3PARAM changes via UPDATE on a unsigned zone test ($n)" +$NSUPDATE << EOF +server 10.53.0.3 ${PORT} +update add example 3600 nsec3param 1 0 0 - +send +EOF + +# the zone is not signed. The nsec3param records should be removed. +# this also proves that the server is still running. +$DIG $DIGOPTS +tcp +noadd +nosea +nostat +noquest +nocmd +norec example.\ + @10.53.0.3 nsec3param > dig.out.ns3.$n || ret=1 +grep "ANSWER: 0," dig.out.ns3.$n > /dev/null || ret=1 +grep "flags:[^;]* aa[ ;]" dig.out.ns3.$n > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "change the NSEC3PARAM ttl via update ($n)" +$NSUPDATE << EOF +server 10.53.0.3 ${PORT} +update add nsec3param.test 3600 NSEC3PARAM 1 0 1 - +send +EOF + +$DIG $DIGOPTS +tcp +noadd +nosea +nostat +noquest +nocmd +norec nsec3param.test.\ + @10.53.0.3 nsec3param > dig.out.ns3.$n || ret=1 +grep "ANSWER: 1," dig.out.ns3.$n > /dev/null || ret=1 +grep "3600.*NSEC3PARAM" dig.out.ns3.$n > /dev/null || ret=1 +grep "flags:[^;]* aa[ ;]" dig.out.ns3.$n > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "add a new NSEC3PARAM via update ($n)" +$NSUPDATE << EOF +server 10.53.0.3 ${PORT} +update add nsec3param.test 3600 NSEC3PARAM 1 0 4 - +send +EOF + +_ret=1 +for i in 0 1 2 3 4 5 6 7 8 9; do + $DIG $DIGOPTS +tcp +norec +time=1 +tries=1 @10.53.0.3 nsec3param.test. NSEC3PARAM > dig.out.ns3.$n || _ret=1 + if grep "ANSWER: 2," dig.out.ns3.$n > /dev/null; then + _ret=0 + break + fi + sleep 1 +done + +if [ $_ret -ne 0 ]; then ret=1; fi +grep "NSEC3PARAM 1 0 4 -" dig.out.ns3.$n > /dev/null || ret=1 +grep "flags:[^;]* aa[ ;]" dig.out.ns3.$n > /dev/null || ret=1 +if [ $ret != 0 ] ; then echo_i "failed"; status=$((ret + status)); fi + +n=$((n + 1)) +ret=0 +echo_i "add, delete and change the ttl of the NSEC3PARAM rrset via update ($n)" +$NSUPDATE << EOF +server 10.53.0.3 ${PORT} +update delete nsec3param.test NSEC3PARAM +update add nsec3param.test 7200 NSEC3PARAM 1 0 5 - +send +EOF + +_ret=1 +for i in 0 1 2 3 4 5 6 7 8 9; do + $DIG $DIGOPTS +tcp +norec +time=1 +tries=1 @10.53.0.3 nsec3param.test. NSEC3PARAM > dig.out.ns3.$n || _ret=1 + if grep "ANSWER: 1," dig.out.ns3.$n > /dev/null; then + _ret=0 + break + fi + sleep 1 +done + +if [ $_ret -ne 0 ]; then ret=1; fi +grep "7200.*NSEC3PARAM 1 0 5 -" dig.out.ns3.$n > /dev/null || ret=1 +grep "flags:[^;]* aa[ ;]" dig.out.ns3.$n > /dev/null || ret=1 +$JOURNALPRINT ns3/nsec3param.test.db.signed.jnl > jp.out.ns3.$n +# intermediate TTL changes. +grep "add nsec3param.test. 7200 IN NSEC3PARAM 1 0 4 -" jp.out.ns3.$n > /dev/null || ret=1 +grep "add nsec3param.test. 7200 IN NSEC3PARAM 1 0 1 -" jp.out.ns3.$n > /dev/null || ret=1 +# delayed adds and deletes. +grep "add nsec3param.test. 0 IN TYPE65534 .# 6 000180000500" jp.out.ns3.$n > /dev/null || ret=1 +grep "add nsec3param.test. 0 IN TYPE65534 .# 6 000140000100" jp.out.ns3.$n > /dev/null || ret=1 +grep "add nsec3param.test. 0 IN TYPE65534 .# 6 000140000400" jp.out.ns3.$n > /dev/null || ret=1 +if [ $ret != 0 ] ; then echo_i "failed"; status=$((ret + status)); fi + + +ret=0 +echo_i "testing that rndc stop updates the file" +$NSUPDATE -k ns1/ddns.key < /dev/null || ret=1 +server 10.53.0.1 ${PORT} +update add updated4.example.nil. 600 A 10.10.10.3 +send +END +sleep 3 +stop_server --use-rndc --port ${CONTROLPORT} ns1 +sleep 3 +# Removing the journal file and restarting the server means +# that the data served by the new server process are exactly +# those dumped to the file by "rndc stop". +rm -f ns1/*jnl +start_server --noclean --restart --port ${PORT} ns1 +for try in 0 1 2 3 4 5 6 7 8 9; do + iret=0 + $DIG $DIGOPTS +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd \ + updated4.example.nil. @10.53.0.1 a > dig.out.ns1 || iret=1 + digcomp knowngood.ns1.afterstop dig.out.ns1 || iret=1 + [ "$iret" -eq 0 ] && break + sleep 1 +done +[ "$iret" -ne 0 ] && ret=1 +[ "$ret" -eq 0 ] || { echo_i "failed"; status=1; } + +ret=0 +echo_i "check that 'nsupdate -l' with a missing keyfile reports the missing file" +$NSUPDATE -4 -p ${PORT} -l -k ns1/nonexistent.key 2> nsupdate.out < /dev/null && ret=1 +grep ns1/nonexistent.key nsupdate.out > /dev/null || ret=1 +if test $ret -ne 0 +then +echo_i "failed"; status=1 +fi + +n=$((n + 1)) +ret=0 +echo_i "check that 'update-policy local' works from localhost address ($n)" +$NSUPDATE -k ns5/session.key > nsupdate.out.$n 2>&1 << END || ret=1 +server 10.53.0.5 ${PORT} +local 127.0.0.1 +update add fromlocal.local.nil. 600 A 1.2.3.4 +send +END +grep REFUSED nsupdate.out.$n > /dev/null 2>&1 && ret=1 +$DIG $DIGOPTS @10.53.0.5 \ + +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd \ + fromlocal.local.nil. > dig.out.ns5.$n || ret=1 +grep fromlocal dig.out.ns5.$n > /dev/null 2>&1 || ret=1 +if test $ret -ne 0 +then +echo_i "failed"; status=1 +fi + +n=$((n + 1)) +ret=0 +echo_i "check that 'update-policy local' fails from non-localhost address ($n)" +grep 'match on session key not from localhost' ns5/named.run > /dev/null && ret=1 +$NSUPDATE -k ns5/session.key > nsupdate.out.$n 2>&1 << END && ret=1 +server 10.53.0.5 ${PORT} +local 10.53.0.1 +update add nonlocal.local.nil. 600 A 4.3.2.1 +send +END +grep REFUSED nsupdate.out.$n > /dev/null 2>&1 || ret=1 +grep 'match on session key not from localhost' ns5/named.run > /dev/null || ret=1 +$DIG $DIGOPTS @10.53.0.5 \ + +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd \ + nonlocal.local.nil. > dig.out.ns5.$n || ret=1 +grep nonlocal dig.out.ns5.$n > /dev/null 2>&1 && ret=1 +if test $ret -ne 0 +then +echo_i "failed"; status=1 +fi + +n=$((n + 1)) +ret=0 +echo_i "check that 'update-policy tcp-self' refuses update of records via UDP ($n)" +$NSUPDATE > nsupdate.out.$n 2>&1 << END && ret=1 +server 10.53.0.6 ${PORT} +local 127.0.0.1 +update add 1.0.0.127.in-addr.arpa. 600 PTR localhost. +send +END +grep REFUSED nsupdate.out.$n > /dev/null 2>&1 || ret=1 +$DIG $DIGOPTS @10.53.0.6 \ + +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd \ + -x 127.0.0.1 > dig.out.ns6.$n +grep localhost. dig.out.ns6.$n > /dev/null 2>&1 && ret=1 +if test $ret -ne 0 +then +echo_i "failed"; status=1 +fi + +n=$((n + 1)) +ret=0 +echo_i "check that 'update-policy tcp-self' permits update of records for the client's own address via TCP ($n)" +$NSUPDATE -v > nsupdate.out.$n 2>&1 << END || ret=1 +server 10.53.0.6 ${PORT} +local 127.0.0.1 +update add 1.0.0.127.in-addr.arpa. 600 PTR localhost. +send +END +grep REFUSED nsupdate.out.$n > /dev/null 2>&1 && ret=1 +$DIG $DIGOPTS @10.53.0.6 \ + +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd \ + -x 127.0.0.1 > dig.out.ns6.$n || ret=1 +grep localhost. dig.out.ns6.$n > /dev/null 2>&1 || ret=1 +if test $ret -ne 0 +then +echo_i "failed"; status=1 +fi + +n=$((n + 1)) +ret=0 +echo_i "check that 'update-policy tcp-self' refuses update of records for a different address from the client's own address via TCP ($n)" +$NSUPDATE -v > nsupdate.out.$n 2>&1 << END && ret=1 +server 10.53.0.6 ${PORT} +local 127.0.0.1 +update add 1.0.168.192.in-addr.arpa. 600 PTR localhost. +send +END +grep REFUSED nsupdate.out.$n > /dev/null 2>&1 || ret=1 +$DIG $DIGOPTS @10.53.0.6 \ + +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd \ + -x 192.168.0.1 > dig.out.ns6.$n +grep localhost. dig.out.ns6.$n > /dev/null 2>&1 && ret=1 +if test $ret -ne 0 +then +echo_i "failed"; status=1 +fi + +n=$((n + 1)) +ret=0 +echo_i "check that 'update-policy subdomain' is properly enforced ($n)" +# "restricted.example.nil" matches "grant ... subdomain restricted.example.nil" +# and thus this UPDATE should succeed. +$NSUPDATE -d < nsupdate.out1-$n 2>&1 || ret=1 +server 10.53.0.1 ${PORT} +key restricted.example.nil 1234abcd8765 +update add restricted.example.nil 0 IN TXT everywhere. +send +END +$DIG $DIGOPTS +tcp @10.53.0.1 restricted.example.nil TXT > dig.out.1.test$n || ret=1 +grep "TXT.*everywhere" dig.out.1.test$n > /dev/null || ret=1 +# "example.nil" does not match "grant ... subdomain restricted.example.nil" and +# thus this UPDATE should fail. +$NSUPDATE -d < nsupdate.out2-$n 2>&1 && ret=1 +server 10.53.0.1 ${PORT} +key restricted.example.nil 1234abcd8765 +update add example.nil 0 IN TXT everywhere. +send +END +$DIG $DIGOPTS +tcp @10.53.0.1 example.nil TXT > dig.out.2.test$n || ret=1 +grep "TXT.*everywhere" dig.out.2.test$n > /dev/null && ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check that 'update-policy zonesub' is properly enforced ($n)" +# grant zonesub-key.example.nil zonesub TXT; +# the A record update should be rejected as it is not in the type list +$NSUPDATE -d < nsupdate.out1-$n 2>&1 && ret=1 +server 10.53.0.1 ${PORT} +key zonesub-key.example.nil 1234subk8765 +update add zonesub.example.nil 0 IN A 1.2.3.4 +send +END +$DIG $DIGOPTS +tcp @10.53.0.1 zonesub.example.nil A > dig.out.1.test$n || ret=1 +grep "status: REFUSED" nsupdate.out1-$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.1.test$n > /dev/null || ret=1 +# the TXT record update should be accepted as it is in the type list +$NSUPDATE -d < nsupdate.out2-$n 2>&1 || ret=1 +server 10.53.0.1 ${PORT} +key zonesub-key.example.nil 1234subk8765 +update add zonesub.example.nil 0 IN TXT everywhere. +send +END +$DIG $DIGOPTS +tcp @10.53.0.1 zonesub.example.nil TXT > dig.out.2.test$n || ret=1 +grep "status: REFUSED" nsupdate.out2-$n > /dev/null && ret=1 +grep "ANSWER: 1," dig.out.2.test$n > /dev/null || ret=1 +grep "TXT.*everywhere" dig.out.2.test$n > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check 'grant' in deny name + grant subdomain ($n)" +$NSUPDATE << EOF > nsupdate.out.test$n 2>&1 || ret=1 +key hmac-sha256:subkey 1234abcd8765 +server 10.53.0.9 ${PORT} +zone denyname.example +update add foo.denyname.example 3600 IN TXT added +send +EOF +$DIG $DIGOPTS +tcp @10.53.0.9 foo.denyname.example TXT > dig.out.ns9.test$n +grep "added" dig.out.ns9.test$n > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check 'deny' in deny name + grant subdomain ($n)" +$NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 +key hmac-sha256:subkey 1234abcd8765 +server 10.53.0.9 ${PORT} +zone denyname.example +update add denyname.example 3600 IN TXT added +send +EOF +$DIG $DIGOPTS +tcp @10.53.0.9 denyname.example TXT > dig.out.ns9.test$n +grep "added" dig.out.ns9.test$n > /dev/null && ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check that changes to the DNSKEY RRset TTL do not have side effects ($n)" +$DIG $DIGOPTS +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd dnskey.test. \ + @10.53.0.3 dnskey | \ + awk -v port="${PORT}" 'BEGIN { print "server 10.53.0.3", port; } + $2 == 10 && $3 == "IN" && $4 == "DNSKEY" { $2 = 600; print "update add", $0 } + END { print "send" }' > update.in.$n +$NSUPDATE update.in.$n + +$DIG $DIGOPTS +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd dnskey.test. \ + @10.53.0.3 any > dig.out.ns3.$n + +grep "600.*DNSKEY" dig.out.ns3.$n > /dev/null || ret=1 +grep TYPE65534 dig.out.ns3.$n > /dev/null && ret=1 +if test $ret -ne 0 +then +echo_i "failed"; status=1 +fi + +n=$((n + 1)) +ret=0 +echo_i "check notify with TSIG worked ($n)" +# if the alternate view received a notify--meaning, the notify was +# validly signed by "altkey"--then the zonefile update.alt.bk will +# will have been created. +[ -f ns2/update.alt.bk ] || ret=1 +if [ $ret -ne 0 ]; then + echo_i "failed" + status=1 +fi + +n=$((n + 1)) +ret=0 +echo_i "check type list options ($n)" +$NSUPDATE -T > typelist.out.T.${n} || { ret=1; echo_i "nsupdate -T failed"; } +$NSUPDATE -P > typelist.out.P.${n} || { ret=1; echo_i "nsupdate -P failed"; } +$NSUPDATE -TP > typelist.out.TP.${n} || { ret=1; echo_i "nsupdate -TP failed"; } +grep ANY typelist.out.T.${n} > /dev/null && { ret=1; echo_i "failed: ANY found (-T)"; } +grep ANY typelist.out.P.${n} > /dev/null && { ret=1; echo_i "failed: ANY found (-P)"; } +grep ANY typelist.out.TP.${n} > /dev/null && { ret=1; echo_i "failed: ANY found (-TP)"; } +grep KEYDATA typelist.out.T.${n} > /dev/null && { ret=1; echo_i "failed: KEYDATA found (-T)"; } +grep KEYDATA typelist.out.P.${n} > /dev/null && { ret=1; echo_i "failed: KEYDATA found (-P)"; } +grep KEYDATA typelist.out.TP.${n} > /dev/null && { ret=1; echo_i "failed: KEYDATA found (-TP)"; } +grep AAAA typelist.out.T.${n} > /dev/null || { ret=1; echo_i "failed: AAAA not found (-T)"; } +grep AAAA typelist.out.P.${n} > /dev/null && { ret=1; echo_i "failed: AAAA found (-P)"; } +grep AAAA typelist.out.TP.${n} > /dev/null || { ret=1; echo_i "failed: AAAA not found (-TP)"; } +if [ $ret -ne 0 ]; then + echo_i "failed" + status=1 +fi + +n=$((n + 1)) +ret=0 +echo_i "check command list ($n)" +( +while read cmd +do + { echo "$cmd" | $NSUPDATE > /dev/null 2>&1; rc=$?; } || true + if test $rc -gt 1 ; then + echo_i "failed ($cmd)" + ret=1 + fi + { echo "$cmd " | $NSUPDATE > /dev/null 2>&1; rc=$?; } || true + if test $rc -gt 1 ; then + echo_i "failed ($cmd)" + ret=1 + fi +done +exit $ret +) < commandlist || ret=1 +if [ $ret -ne 0 ]; then + status=1 +fi + +n=$((n + 1)) +ret=0 + +n=$((n + 1)) +ret=0 +echo_i "check TSIG key algorithms using legacy K file pairs (nsupdate -k) ($n)" +if $FEATURETEST --md5 +then + ALGS="157 161 162 163 164 165" +else + ALGS="161 162 163 164 165" + echo_i "skipping disabled md5 (157) algorithm" +fi +for alg in $ALGS; do + $NSUPDATE -k ns1/legacy/Klegacy-${alg}.+${alg}+*.key < nsupdate.alg-$alg.out 2>&1 || ret=1 +server 10.53.0.1 ${PORT} +update add ${alg}.keytests.nil. 600 A 10.10.10.3 +send +END +done +sleep 2 +for alg in $ALGS; do + $DIG $DIGOPTS +short @10.53.0.1 ${alg}.keytests.nil | grep 10.10.10.3 > /dev/null 2>&1 || ret=1 + grep "Use of K\* file pairs for HMAC is deprecated" nsupdate.alg-$alg.out > /dev/null || ret=1 +done +if [ $ret -ne 0 ]; then + echo_i "failed" + status=1 +fi + +n=$((n + 1)) +ret=0 + +echo_i "check TSIG key algorithms (nsupdate -k) ($n)" +if $FEATURETEST --md5 +then + ALGS="md5 sha1 sha224 sha256 sha384 sha512" +else + ALGS="sha1 sha224 sha256 sha384 sha512" + echo_i "skipping disabled md5 algorithm" +fi +for alg in $ALGS; do + $NSUPDATE -k ns1/${alg}.key < /dev/null || ret=1 +server 10.53.0.1 ${PORT} +update add ${alg}.keytests.nil. 600 A 10.10.10.3 +send +END +done +sleep 2 +for alg in $ALGS; do + $DIG $DIGOPTS +short @10.53.0.1 ${alg}.keytests.nil | grep 10.10.10.3 > /dev/null 2>&1 || ret=1 +done +if [ $ret -ne 0 ]; then + echo_i "failed" + status=1 +fi + +n=$((n + 1)) +ret=0 +echo_i "check TSIG key algorithms (nsupdate -y) ($n)" +for alg in md5 sha1 sha224 sha256 sha384 sha512; do + secret=$(sed -n 's/.*secret "\(.*\)";.*/\1/p' ns1/${alg}.key) + $NSUPDATE -y "hmac-${alg}:${alg}-key:$secret" < /dev/null || ret=1 +server 10.53.0.1 ${PORT} +update add ${alg}.keytests.nil. 600 A 10.10.10.50 +send +END +done +sleep 2 +for alg in md5 sha1 sha224 sha256 sha384 sha512; do + $DIG $DIGOPTS +short @10.53.0.1 ${alg}.keytests.nil | grep 10.10.10.50 > /dev/null 2>&1 || ret=1 +done +if [ $ret -ne 0 ]; then + echo_i "failed" + status=1 +fi + +n=$((n + 1)) +ret=0 +echo_i "check that ttl is capped by max-ttl ($n)" +$NSUPDATE < /dev/null || ret=1 +server 10.53.0.1 ${PORT} +update add cap.max-ttl.nil. 600 A 10.10.10.3 +update add nocap.max-ttl.nil. 150 A 10.10.10.3 +send +END +sleep 2 +$DIG $DIGOPTS @10.53.0.1 cap.max-ttl.nil | grep "^cap.max-ttl.nil. 300" > /dev/null 2>&1 || ret=1 +$DIG $DIGOPTS @10.53.0.1 nocap.max-ttl.nil | grep "^nocap.max-ttl.nil. 150" > /dev/null 2>&1 || ret=1 +if [ $ret -ne 0 ]; then + echo_i "failed" + status=1 +fi + +n=$((n + 1)) +ret=0 +echo_i "add a record which is truncated when logged. ($n)" +$NSUPDATE verylarge || ret=1 +$DIG $DIGOPTS +tcp @10.53.0.1 txt txt.update.nil > dig.out.ns1.test$n +grep "ANSWER: 1," dig.out.ns1.test$n > /dev/null || ret=1 +grep "adding an RR at 'txt.update.nil' TXT .* \[TRUNCATED\]" ns1/named.run > /dev/null || ret=1 +if [ $ret -ne 0 ]; then + echo_i "failed" + status=1 +fi + +n=$((n + 1)) +ret=0 +echo_i "check that yyyymmddvv serial number is correctly generated ($n)" +oldserial=$($DIG $DIGOPTS +short yyyymmddvv.nil. soa @10.53.0.1 | awk '{print $3}') || ret=1 +$NSUPDATE < /dev/null 2>&1 || ret=1 + server 10.53.0.1 ${PORT} + ttl 600 + update add new.yyyymmddvv.nil in a 1.2.3.4 + send +END +now=$($PERL -e '@lt=localtime(); printf "%.4d%0.2d%0.2d00\n",$lt[5]+1900,$lt[4]+1,$lt[3];') +sleep 1 +serial=$($DIG $DIGOPTS +short yyyymmddvv.nil. soa @10.53.0.1 | awk '{print $3}') || ret=1 +[ "$oldserial" -ne "$serial" ] || ret=1 +[ "$serial" -eq "$now" ] || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +# +# Refactor to use perl to launch the parallel updates. +# +if false +then +n=$((n + 1)) +echo_i "send many simultaneous updates via a update forwarder ($n)" +ret=0 +for i in 0 1 2 3 4 5 6 7 +do +( + for j in 0 1 2 3 4 5 6 7 + do + ( + $NSUPDATE << EOF +server 10.53.0.3 ${PORT} +zone many.test +update add $i-$j.many.test 0 IN A 1.2.3.4 +send +EOF + ) & + done + wait +) & +done +wait +dig axfr many.test @10.53.0.1 > dig.out.test$n +lines=$(awk '$4 == "A" { l++ } END { print l }' dig.out.test$n) +test ${lines:-0} -eq 64 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } +fi + +n=$((n + 1)) +echo_i "check max-journal-size limits ($n)" +ret=0 +rm -f nsupdate.out1-$n +# add one record +$NSUPDATE << EOF >> nsupdate.out1-$n 2>&1 +server 10.53.0.1 ${PORT} +zone maxjournal.test +update add z.maxjournal.test 300 IN A 10.20.30.40 +send +EOF +for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20; do + # repeatedly add and remove the same set of records to fill up + # the journal file without changing the zone content + $NSUPDATE << EOF >> nsupdate.out1-$n 2>&1 +server 10.53.0.1 ${PORT} +zone maxjournal.test +update add a.maxjournal.test 300 IN A 1.2.3.4 +update add b.maxjournal.test 300 IN A 1.2.3.4 +update add c.maxjournal.test 300 IN A 1.2.3.4 +update add d.maxjournal.test 300 IN A 1.2.3.4 +send +update del a.maxjournal.test +update del b.maxjournal.test +update del c.maxjournal.test +update del d.maxjournal.test +send +EOF +done +# check that the journal is big enough to require truncation. +size=$($PERL -e 'use File::stat; my $sb = stat(@ARGV[0]); printf("%s\n", $sb->size);' ns1/maxjournal.db.jnl) +[ "$size" -gt 6000 ] || ret=1 +sleep 1 +$RNDCCMD 10.53.0.1 sync maxjournal.test +check_size_lt_5000() ( + size=$($PERL -e 'use File::stat; my $sb = stat(@ARGV[0]); printf("%s\n", $sb->size);' ns1/maxjournal.db.jnl) + [ "$size" -lt 5000 ] +) +retry_quiet 20 check_size_lt_5000 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +echo_i "check check-names processing ($n)" +ret=0 +$NSUPDATE << EOF > nsupdate.out1-$n 2>&1 && ret=1 +update add # 0 in a 1.2.3.4 +EOF +grep "bad owner" nsupdate.out1-$n > /dev/null || ret=1 + +$NSUPDATE << EOF > nsupdate.out2-$n 2>&1 || ret=1 +check-names off +update add # 0 in a 1.2.3.4 +EOF +grep "bad owner" nsupdate.out2-$n > /dev/null && ret=1 + +$NSUPDATE << EOF > nsupdate.out3-$n 2>&1 && ret=1 +update add . 0 in mx 0 # +EOF +grep "bad name" nsupdate.out3-$n > /dev/null || ret=1 + +$NSUPDATE << EOF > nsupdate.out4-$n 2>&1 || ret=1 +check-names off +update add . 0 in mx 0 # +EOF +grep "bad name" nsupdate.out4-$n > /dev/null && ret=1 + +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +echo_i "check adding of delegating NS records processing ($n)" +ret=0 +$NSUPDATE -v << EOF > nsupdate.out.test$n 2>&1 || ret=1 +server 10.53.0.3 ${PORT} +zone delegation.test. +update add child.delegation.test. 3600 NS foo.example.net. +update add child.delegation.test. 3600 NS bar.example.net. +send +EOF +$DIG $DIGOPTS +tcp @10.53.0.3 ns child.delegation.test > dig.out.ns1.test$n +grep "status: NOERROR" dig.out.ns1.test$n > /dev/null 2>&1 || ret=1 +grep "AUTHORITY: 2" dig.out.ns1.test$n > /dev/null 2>&1 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +echo_i "check deleting of delegating NS records processing ($n)" +ret=0 +$NSUPDATE -v << EOF > nsupdate.out.test$n 2>&1 || ret=1 +server 10.53.0.3 ${PORT} +zone delegation.test. +update del child.delegation.test. 3600 NS foo.example.net. +update del child.delegation.test. 3600 NS bar.example.net. +send +EOF +$DIG $DIGOPTS +tcp @10.53.0.3 ns child.delegation.test > dig.out.ns1.test$n +grep "status: NXDOMAIN" dig.out.ns1.test$n > /dev/null 2>&1 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +echo_i "check that adding too many records is blocked ($n)" +ret=0 +$NSUPDATE -v << EOF > nsupdate.out.test$n 2>&1 && ret=1 +server 10.53.0.3 ${PORT} +zone too-big.test. +update add r1.too-big.test 3600 IN TXT r1.too-big.test +send +EOF +grep "update failed: SERVFAIL" nsupdate.out.test$n > /dev/null || ret=1 +$DIG $DIGOPTS +tcp @10.53.0.3 r1.too-big.test TXT > dig.out.ns3.test$n +grep "status: NXDOMAIN" dig.out.ns3.test$n > /dev/null || ret=1 +grep "records in zone (4) exceeds max-records (3)" ns3/named.run > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check whether valid addresses are used for primary failover (UDP with defaults) ($n)" +t1=$($PERL -e 'print time()') +$NSUPDATE < nsupdate.out.test$n 2>&1 && ret=1 +server 10.53.0.4 ${PORT} +zone unreachable. +update add unreachable. 600 A 192.0.2.1 +send +END +t2=$($PERL -e 'print time()') +grep "; Communication with 10.53.0.4#${PORT} failed: timed out" nsupdate.out.test$n > /dev/null 2>&1 || ret=1 +grep "not implemented" nsupdate.out.test$n > /dev/null 2>&1 && ret=1 +elapsed=$((t2 - t1)) +# Check that default timeout value is respected, there should be 4 tries with 3 seconds each. +test $elapsed -lt 12 && ret=1 +test $elapsed -gt 15 && ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check whether valid addresses are used for primary failover (UDP with -u udptimeout) ($n)" +t1=$($PERL -e 'print time()') +$NSUPDATE -u 4 -r 1 < nsupdate.out.test$n 2>&1 && ret=1 +server 10.53.0.4 ${PORT} +zone unreachable. +update add unreachable. 600 A 192.0.2.1 +send +END +t2=$($PERL -e 'print time()') +grep "; Communication with 10.53.0.4#${PORT} failed: timed out" nsupdate.out.test$n > /dev/null 2>&1 || ret=1 +grep "not implemented" nsupdate.out.test$n > /dev/null 2>&1 && ret=1 +elapsed=$((t2 - t1)) +# Check that given timeout value is respected, there should be 2 tries with 4 seconds each. +test $elapsed -lt 8 && ret=1 +test $elapsed -gt 12 && ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check whether valid addresses are used for primary failover (UDP with -t timeout) ($n)" +t1=$($PERL -e 'print time()') +$NSUPDATE -u 0 -t 8 -r 1 < nsupdate.out.test$n 2>&1 && ret=1 +server 10.53.0.4 ${PORT} +zone unreachable. +update add unreachable. 600 A 192.0.2.1 +send +END +t2=$($PERL -e 'print time()') +grep "; Communication with 10.53.0.4#${PORT} failed: timed out" nsupdate.out.test$n > /dev/null 2>&1 || ret=1 +grep "not implemented" nsupdate.out.test$n > /dev/null 2>&1 && ret=1 +elapsed=$((t2 - t1)) +# Check that given timeout value is respected, there should be 2 tries with 4 seconds each. +test $elapsed -lt 8 && ret=1 +test $elapsed -gt 12 && ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check whether valid addresses are used for primary failover (UDP with -u udptimeout -t timeout) ($n)" +t1=$($PERL -e 'print time()') +$NSUPDATE -u 4 -t 30 -r 1 < nsupdate.out.test$n 2>&1 && ret=1 +server 10.53.0.4 ${PORT} +zone unreachable. +update add unreachable. 600 A 192.0.2.1 +send +END +t2=$($PERL -e 'print time()') +grep "; Communication with 10.53.0.4#${PORT} failed: timed out" nsupdate.out.test$n > /dev/null 2>&1 || ret=1 +grep "not implemented" nsupdate.out.test$n > /dev/null 2>&1 && ret=1 +elapsed=$((t2 - t1)) +# Check that given timeout value is respected, there should be 2 tries with 4 seconds each, as -u takes precedence over -t. +test $elapsed -lt 8 && ret=1 +test $elapsed -gt 12 && ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check whether valid addresses are used for primary failover (TCP with -t timeout) ($n)" +t1=$($PERL -e 'print time()') +$NSUPDATE -t 8 -v < nsupdate.out.test$n 2>&1 && ret=1 +server 10.53.0.4 ${PORT} +zone unreachable. +update add unreachable. 600 A 192.0.2.1 +send +END +t2=$($PERL -e 'print time()') +grep "; Communication with 10.53.0.4#${PORT} failed: timed out" nsupdate.out.test$n > /dev/null 2>&1 || ret=1 +grep "not implemented" nsupdate.out.test$n > /dev/null 2>&1 && ret=1 +elapsed=$((t2 - t1)) +# Check that given timeout value is respected, there should be 1 try with 8 seconds. +test $elapsed -lt 8 && ret=1 +test $elapsed -gt 12 && ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "ensure bad owner name is fatal in non-interactive mode ($n)" +$NSUPDATE < nsupdate.out 2>&1 && ret=1 + update add emptylabel..nil. 600 A 10.10.10.1 +END +grep "invalid owner name: empty label" nsupdate.out > /dev/null || ret=1 +grep "syntax error" nsupdate.out > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "ensure bad owner name is not fatal in interactive mode ($n)" +$NSUPDATE -i < nsupdate.out 2>&1 || ret=1 + update add emptylabel..nil. 600 A 10.10.10.1 +END +grep "invalid owner name: empty label" nsupdate.out > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "ensure invalid key type is fatal in non-interactive mode ($n)" +$NSUPDATE < nsupdate.out 2>&1 && ret=1 + key badkeytype:example abcd12345678 +END +grep "unknown key type 'badkeytype'" nsupdate.out > /dev/null || ret=1 +grep "syntax error" nsupdate.out > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "ensure invalid key type is not fatal in interactive mode ($n)" +$NSUPDATE -i < nsupdate.out 2>&1 || ret=1 + key badkeytype:example abcd12345678 +END +grep "unknown key type 'badkeytype'" nsupdate.out > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "ensure unresolvable server name is fatal in non-interactive mode ($n)" +$NSUPDATE < nsupdate.out 2>&1 && ret=1 + server unresolvable.. +END +grep "couldn't get address for 'unresolvable..':" nsupdate.out > /dev/null || ret=1 +grep "syntax error" nsupdate.out > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "ensure unresolvable server name is not fatal in interactive mode ($n)" +$NSUPDATE -i < nsupdate.out 2>&1 || ret=1 + server unresolvable.. +END +grep "couldn't get address for 'unresolvable..':" nsupdate.out > /dev/null || ret=1 +grep "syntax error" nsupdate.out > /dev/null && ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check nsupdate -4 -6 ($n)" +$NSUPDATE -4 -6 < nsupdate.out.test$n 2>&1 && ret=1 +server 10.53.0.3 ${PORT} +zone delegation.test. +update del child.delegation.test. 3600 NS foo.example.net. +update del child.delegation.test. 3600 NS bar.example.net. +send +END +grep "only one of -4 and -6 allowed" nsupdate.out.test$n > /dev/null 2>&1 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check nsupdate -4 with an IPv6 server address ($n)" +$NSUPDATE -4 < nsupdate.out.test$n 2>&1 && ret=1 +server fd92:7065:b8e:ffff::2 ${PORT} +zone delegation.test. +update del child.delegation.test. 3600 NS foo.example.net. +update del child.delegation.test. 3600 NS bar.example.net. +send +END +grep "address family not supported" nsupdate.out.test$n > /dev/null 2>&1 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check that TKEY in a update is rejected ($n)" +$NSUPDATE -d < nsupdate.out.test$n 2>&1 && ret=1 +server 10.53.0.3 ${PORT} +update add tkey.example 0 in tkey invalid.algorithm. 1516055980 1516140801 1 0 16 gRof8D2BFKvl/vrr9Lmnjw== 16 gRof8D2BFKvl/vrr9Lmnjw== +send +END +grep "UPDATE, status: NOERROR" nsupdate.out.test$n > /dev/null 2>&1 || ret=1 +grep "UPDATE, status: FORMERR" nsupdate.out.test$n > /dev/null 2>&1 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check that max records is enforced ($n)" +nextpart ns6/named.run > /dev/null +$NSUPDATE -v > nsupdate.out.$n 2>&1 << END +server 10.53.0.6 ${PORT} +local 10.53.0.5 +update del 5.0.53.10.in-addr.arpa. +update add 5.0.53.10.in-addr.arpa. 600 PTR localhost. +update add 5.0.53.10.in-addr.arpa. 600 PTR other. +send +END +$DIG $DIGOPTS @10.53.0.6 \ + +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd \ + -x 10.53.0.5 > dig.out.ns6.$n +# the policy is 'grant * tcp-self . PTR(1) ANY(2) A;' so only the +# first PTR record should be added. +grep localhost. dig.out.ns6.$n > /dev/null 2>&1 || ret=1 +grep other. dig.out.ns6.$n > /dev/null 2>&1 && ret=1 +nextpart ns6/named.run > nextpart.out.$n +grep "attempt to add more records than permitted by policy" nextpart.out.$n > /dev/null || ret=1 +if test $ret -ne 0 +then +echo_i "failed"; status=1 +fi + +n=$((n + 1)) +ret=0 +echo_i "check that max records for ANY is enforced ($n)" +nextpart ns6/named.run > /dev/null +$NSUPDATE -v > nsupdate.out.$n 2>&1 << END +server 10.53.0.6 ${PORT} +local 10.53.0.5 +update del 5.0.53.10.in-addr.arpa. +update add 5.0.53.10.in-addr.arpa. 600 A 1.2.3.4 +update add 5.0.53.10.in-addr.arpa. 600 A 1.2.3.3 +update add 5.0.53.10.in-addr.arpa. 600 A 1.2.3.2 +update add 5.0.53.10.in-addr.arpa. 600 AAAA ::ffff:1.2.3.4 +update add 5.0.53.10.in-addr.arpa. 600 AAAA ::ffff:1.2.3.3 +update add 5.0.53.10.in-addr.arpa. 600 AAAA ::ffff:1.2.3.2 +send +END +$DIG $DIGOPTS @10.53.0.6 \ + +tcp +noadd +nosea +nostat +noquest +nocomm +nocmd \ + ANY -x 10.53.0.5 > dig.out.ns6.test$n +nextpart ns6/named.run > nextpart.out.test$n +grep "attempt to add more records than permitted by policy" nextpart.out.test$n > /dev/null || ret=1 +# the policy is 'grant * tcp-self . PTR(1) ANY(2) A;' so all the A +# records should have been added as there is no limit and the first 2 +# of the AAAA records added as they match ANY(2). +c1=$(awk '$4 == "A" { print }' dig.out.ns6.test$n | wc -l) +c2=$(awk '$4 == "AAAA" { print }' dig.out.ns6.test$n | wc -l) +test "$c1" -eq 3 -a "$c2" -eq 2 || ret=1 +grep "::ffff:1.2.3.2" dig.out.ns6.test$n && ret=1 +if test $ret -ne 0 +then +echo_i "failed"; status=1 +fi + +n=$((n + 1)) +ret=0 +echo_i "check that DS to the zone apex is ignored ($n)" +$DIG $DIGOPTS +tcp +norec example DS @10.53.0.3 > dig.out.pre.test$n || ret=1 +grep "status: NOERROR" dig.out.pre.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.pre.test$n > /dev/null || ret=1 +nextpart ns3/named.run > /dev/null +# specify zone to override the default of adding to parent zone +$NSUPDATE -d < nsupdate.out.test$n 2>&1 || ret=1 +server 10.53.0.3 ${PORT} +zone example +update add example 0 in DS 14364 10 2 FD03B2312C8F0FE72C1751EFA1007D743C94EC91594FF0047C23C37CE119BA0C +send +END +msg=": attempt to add a DS record at zone apex ignored" +nextpart ns3/named.run | grep "$msg" > /dev/null || ret=1 +$DIG $DIGOPTS +tcp +norec example DS @10.53.0.3 > dig.out.post.test$n || ret=1 +grep "status: NOERROR" dig.out.post.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.post.test$n > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check that CDS with mismatched algorithm to DNSSEC multisigner zone is not allowed ($n)" +$DIG $DIGOPTS +tcp +norec multisigner.test CDS @10.53.0.3 > dig.out.pre.test$n || ret=1 +grep "status: NOERROR" dig.out.pre.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.pre.test$n > /dev/null || ret=1 +$NSUPDATE -d < nsupdate.out.test$n 2>&1 && ret=1 +server 10.53.0.3 ${PORT} +zone multisigner.test +update add multisigner.test 3600 IN CDS 14364 14 2 FD03B2312C8F0FE72C1751EFA1007D743C94EC91594FF0047C23C37CE119BA0C +send +END +msg=": bad CDS RRset" +nextpart ns3/named.run | grep "$msg" > /dev/null || ret=1 +$DIG $DIGOPTS +tcp +norec multisigner.test CDS @10.53.0.3 > dig.out.post.test$n || ret=1 +grep "status: NOERROR" dig.out.post.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.post.test$n > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check that CDNSKEY with mismatched algorithm to DNSSEC multisigner zone is not allowed ($n)" +$DIG $DIGOPTS +tcp +norec multisigner.test CDNSKEY @10.53.0.3 > dig.out.pre.test$n || ret=1 +grep "status: NOERROR" dig.out.pre.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.pre.test$n > /dev/null || ret=1 +nextpart ns3/named.run > /dev/null +$NSUPDATE -d < nsupdate.out.test$n 2>&1 && ret=1 +server 10.53.0.3 ${PORT} +zone multisigner.test +update add multisigner.test 3600 IN CDNSKEY 257 3 14 d0NQ5PKmDz6P0B1WPMH9/UKRux/toSFwV2nTJYPA1Cx8pB0sJGTXbVhG U+6gye7VCHDhGIn9CjVfb2RJPW7GnQ== +send +END +msg=": bad CDNSKEY RRset" +nextpart ns3/named.run | grep "$msg" > /dev/null || ret=1 +$DIG $DIGOPTS +tcp +norec multisigner.test CDNSKEY @10.53.0.3 > dig.out.post.test$n || ret=1 +grep "status: NOERROR" dig.out.post.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.post.test$n > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check that CDS to DNSSEC multisigner zone is allowed ($n)" +$DIG $DIGOPTS +tcp +norec multisigner.test CDS @10.53.0.3 > dig.out.pre.test$n || ret=1 +grep "status: NOERROR" dig.out.pre.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.pre.test$n > /dev/null || ret=1 +$NSUPDATE -d < nsupdate.out.test$n 2>&1 || ret=1 +server 10.53.0.3 ${PORT} +zone multisigner.test +update add multisigner.test 3600 IN CDS 14364 13 2 FD03B2312C8F0FE72C1751EFA1007D743C94EC91594FF0047C23C37CE119BA0C +send +END +retry_quiet 5 has_positive_response multisigner.test CDS 10.53.0.3 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check that CDNSKEY to DNSSEC multisigner zone is allowed ($n)" +$DIG $DIGOPTS +tcp +norec multisigner.test CDNSKEY @10.53.0.3 > dig.out.pre.test$n || ret=1 +grep "status: NOERROR" dig.out.pre.test$n > /dev/null || ret=1 +grep "ANSWER: 0," dig.out.pre.test$n > /dev/null || ret=1 +$NSUPDATE -d < nsupdate.out.test$n 2>&1 || ret=1 +server 10.53.0.3 ${PORT} +zone multisigner.test +update add multisigner.test 3600 IN CDNSKEY 257 3 13 d0NQ5PKmDz6P0B1WPMH9/UKRux/toSFwV2nTJYPA1Cx8pB0sJGTXbVhG U+6gye7VCHDhGIn9CjVfb2RJPW7GnQ== +send +END +retry_quiet 5 has_positive_response multisigner.test CDNSKEY 10.53.0.3 || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check that excessive NSEC3PARAM iterations are rejected by nsupdate ($n)" +$NSUPDATE -d < nsupdate.out.test$n 2>&1 && ret=1 +server 10.53.0.3 ${PORT} +zone example +update add example 0 in NSEC3PARAM 1 0 151 - +END +grep "NSEC3PARAM has excessive iterations (> 150)" nsupdate.out.test$n >/dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check nsupdate retries with another server on REFUSED response ($n)" +# resolv.conf uses 10.53.0.1 followed by 10.53.0.3; example is only +# served by 10.53.0.3, so we should fail over to the second server; +# that's what we're testing for. (failure is still expected, however, +# because the address lookup for the primary doesn't use the overridden +# resolv.conf file). +$NSUPDATE -D -C resolv.conf -p ${PORT} << EOF > nsupdate.out.test$n 2>&1 && ret=1 +zone example +update add a 3600 IN A 1.2.3.4 +send +EOF +grep '10.53.0.1.*REFUSED' nsupdate.out.test$n > /dev/null || ret=1 +grep 'Reply from SOA query' nsupdate.out.test$n > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check that update is rejected if query is not allowed ($n)" +{ + $NSUPDATE -d < nsupdate.out.test$n 2>&1 +grep 'failed: REFUSED' nsupdate.out.test$n > /dev/null || ret=1 +[ $ret = 0 ] || { echo_i "failed"; status=1; } + +n=$((n + 1)) +ret=0 +echo_i "check that update is rejected if quota is exceeded ($n)" +for loop in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20; do +{ + $NSUPDATE -4 -l -p ${PORT} -k ns1/session.key > /dev/null 2>&1 < nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone example.com + send +EOF + grep "response to GSS-TSIG query was unsuccessful (REFUSED)" nsupdate.out.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + copy_setports ns7/named2.conf.in ns7/named.conf + rndc_reload ns7 10.53.0.7 + + n=$((n + 1)) + ret=0 + echo_i "check krb5-self match ($n)" + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone example.com + update add machine.example.com 3600 IN A 10.53.0.7 + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.7 machine.example.com A > dig.out.ns7.test$n + grep "status: NOERROR" dig.out.ns7.test$n > /dev/null || ret=1 + grep "machine.example.com..*A.*10.53.0.7" dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n + 1)) + ret=0 + echo_i "check krb5-self no-match ($n)" + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone example.com + update add foo.example.com 3600 IN A 10.53.0.7 + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.7 foo.example.com A > dig.out.ns7.test$n + grep "status: NXDOMAIN" dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n + 1)) + ret=0 + echo_i "check krb5-subdomain match ($n)" + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE -d << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone example.com + update add _xxx._tcp.example.com 3600 IN SRV 0 0 0 machine.example.com + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.7 _xxx._tcp.example.com SRV > dig.out.ns7.test$n + grep "status: NOERROR" dig.out.ns7.test$n > /dev/null || ret=1 + grep "_xxx._tcp.example.com.*SRV.*0 0 0 machine.example.com" dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n + 1)) + ret=0 + echo_i "check krb5-subdomain no-match ($n)" + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone example.com + update add _xxx._udp.example.com 3600 IN SRV 0 0 0 machine.example.com + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.7 _xxx._udp.example.com SRV > dig.out.ns7.test$n + grep "status: NXDOMAIN" dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check krb5-subdomain-self-rhs match PTR ($n)" + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE -d << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone in-addr.arpa + update add 4.3.2.1.in-addr.arpa 3600 IN PTR machine.example.com + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.7 4.3.2.1.in-addr.arpa PTR > dig.out.ns7.test$n + grep "status: NOERROR" dig.out.ns7.test$n > /dev/null || ret=1 + grep "4.3.2.1.in-addr.arpa.*PTR.*machine.example.com" dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check krb5-subdomain-self-rhs no-match PTR ($n)" + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone in-addr.arpa + update add 5.3.2.1.in-addr.arpa 3600 IN PTR notme.example.com + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.7 5.3.2.1.in-addr.arpa PTR > dig.out.ns7.test$n + grep "status: NXDOMAIN" dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check krb5-subdomain-self-rhs match SRV ($n)" + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE -d << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone example.com + update add _xxx.self-srv.example.com 3600 IN SRV 0 0 0 machine.example.com + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.7 _xxx.self-srv.example.com ANY > dig.out.ns7.test$n + grep "status: NOERROR" dig.out.ns7.test$n > /dev/null || ret=1 + grep "_xxx.self-srv.example.com.*SRV.*0 0 0 machine.example.com" dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check krb5-subdomain-self-rhs no listed types match (SRV & TXT) ($n)" + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE -d << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone example.com + update add _xxx.self-srv-no-type.example.com 3600 IN SRV 0 0 0 machine.example.com + update add _xxx.self-srv-no-type.example.com 3600 IN TXT a txt record + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.7 _xxx.self-srv-no-type.example.com ANY > dig.out.ns7.test$n + grep "status: NOERROR" dig.out.ns7.test$n > /dev/null || ret=1 + grep '_xxx.self-srv-no-type.example.com.*SRV.*0 0 0 machine.example.com' dig.out.ns7.test$n > /dev/null || ret=1 + grep '_xxx.self-srv-no-type.example.com.*TXT.*"a" "txt" "record"' dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check krb5-subdomain-self-rhs no-match RDATA (SRV) ($n)" + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone example.com + update add _yyy.self-srv.example.com 3600 IN SRV 0 0 0 notme.example.com + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.7 _yyy.self-srv.example.com SRV > dig.out.ns7.test$n + grep "status: NXDOMAIN" dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check krb5-subdomain-self-rhs no-match TYPE (TXT) ($n)" + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone example.com + update add _yyy.self-srv.example.com 3600 IN TXT a-txt-record + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.7 _yyy.self-srv.example.com TXT > dig.out.ns7.test$n + grep "status: NXDOMAIN" dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check krb5-subdomain-self-rhs delete PTR (matching PTR) ($n)" + $DIG $DIGOPTS +tcp @10.53.0.7 single.ptr.self-ptr.in-addr.arpa PTR > dig.out.ns7.pre.test$n + grep "status: NOERROR" dig.out.ns7.pre.test$n > /dev/null || ret=1 + grep "ANSWER: 1," dig.out.ns7.pre.test$n > /dev/null || ret=1 + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone in-addr.arpa + update delete single.ptr.self-ptr.in-addr.arpa PTR + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.7 single.ptr.self-ptr.in-addr.arpa PTR > dig.out.ns7.test$n + grep "status: NXDOMAIN" dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check krb5-subdomain-self-rhs delete PTR (matching PTR with non-matching PTR) ($n)" + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone in-addr.arpa + update delete many.ptr.self-ptr.in-addr.arpa PTR + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.7 many.ptr.self-ptr.in-addr.arpa PTR > dig.out.ns7.test$n + grep "status: NOERROR" dig.out.ns7.test$n > /dev/null || ret=1 + grep "ANSWER: 2," dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check krb5-subdomain-self-rhs delete ANY (matching PTR) ($n)" + $DIG $DIGOPTS +tcp @10.53.0.7 single.any.self-ptr.in-addr.arpa PTR > dig.out.ns7.pre.test$n + grep "status: NOERROR" dig.out.ns7.pre.test$n > /dev/null || ret=1 + grep "ANSWER: 1," dig.out.ns7.pre.test$n > /dev/null || ret=1 + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone in-addr.arpa + update delete single.any.self-ptr.in-addr.arpa + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.7 single.any.self-ptr.in-addr.arpa PTR > dig.out.ns7.test$n + grep "status: NXDOMAIN" dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check krb5-subdomain-self-rhs delete ANY (matching PTR with non-matching PTR) ($n)" + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone in-addr.arpa + update delete many.any.self-ptr.in-addr.arpa + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.7 many.any.self-ptr.in-addr.arpa PTR > dig.out.ns7.test$n + grep "status: NOERROR" dig.out.ns7.test$n > /dev/null || ret=1 + grep "ANSWER: 2," dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check krb5-subdomain-self-rhs delete SRV (matching SRV) ($n)" + $DIG $DIGOPTS +tcp @10.53.0.7 single.srv.self-srv.example.com SRV > dig.out.ns7.pre.test$n + grep "status: NOERROR" dig.out.ns7.pre.test$n > /dev/null || ret=1 + grep "ANSWER: 1," dig.out.ns7.pre.test$n > /dev/null || ret=1 + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone example.com + update delete single.srv.self-srv.example.com SRV + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.7 single.srv.self-srv.example.com SRV > dig.out.ns7.test$n + grep "status: NXDOMAIN" dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check krb5-subdomain-self-rhs delete SRV (matching SRV with non-matching SRV) ($n)" + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone example.com + update delete many.srv.self-srv.example.com SRV + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.7 many.srv.self-srv.example.com SRV > dig.out.ns7.test$n + grep "status: NOERROR" dig.out.ns7.test$n > /dev/null || ret=1 + grep "ANSWER: 2," dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check krb5-subdomain-self-rhs delete ANY (matching SRV) ($n)" + $DIG $DIGOPTS +tcp @10.53.0.7 single.any.self-srv.example.com SRV > dig.out.ns7.pre.test$n + grep "status: NOERROR" dig.out.ns7.pre.test$n > /dev/null || ret=1 + grep "ANSWER: 1," dig.out.ns7.pre.test$n > /dev/null || ret=1 + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone example.com + update delete single.any.self-srv.example.com + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.7 single.any.self-srv.example.com SRV > dig.out.ns7.test$n + grep "status: NXDOMAIN" dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check krb5-subdomain-self-rhs delete ANY (matching SRV with non-matching SRV) ($n)" + KRB5CCNAME="FILE:$(pwd)/ns7/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.7 ${PORT} + zone example.com + update delete many.any.self-srv.example.com + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.7 many.any.self-srv.example.com SRV > dig.out.ns7.test$n + grep "status: NOERROR" dig.out.ns7.test$n > /dev/null || ret=1 + grep "ANSWER: 2," dig.out.ns7.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n + 1)) + ret=0 + echo_i "check krb5-selfsub match ($n)" + KRB5CCNAME="FILE:$(pwd)/ns8/machine.ccache" + export KRB5CCNAME + $NSUPDATE -d << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.8 ${PORT} + zone example.com + update add xxx.machine.example.com 3600 IN A 10.53.0.8 + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.8 xxx.machine.example.com A > dig.out.ns8.test$n + grep "status: NOERROR" dig.out.ns8.test$n > /dev/null || ret=1 + grep "xxx.machine.example.com..*A.*10.53.0.8" dig.out.ns8.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n + 1)) + ret=0 + echo_i "check krb5-selfsub no-match ($n)" + KRB5CCNAME="FILE:$(pwd)/ns8/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.8 ${PORT} + zone example.com + update add foo.example.com 3600 IN A 10.53.0.8 + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.8 foo.example.com A > dig.out.ns8.test$n + grep "status: NXDOMAIN" dig.out.ns8.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n + 1)) + ret=0 + echo_i "check ms-self match ($n)" + KRB5CCNAME="FILE:$(pwd)/ns9/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.9 ${PORT} + zone example.com + update add machine.example.com 3600 IN A 10.53.0.9 + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.9 machine.example.com A > dig.out.ns9.test$n + grep "status: NOERROR" dig.out.ns9.test$n > /dev/null || ret=1 + grep "machine.example.com..*A.*10.53.0.9" dig.out.ns9.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n + 1)) + ret=0 + echo_i "check ms-self no-match ($n)" + KRB5CCNAME="FILE:$(pwd)/ns9/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.9 ${PORT} + zone example.com + update add foo.example.com 3600 IN A 10.53.0.9 + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.9 foo.example.com A > dig.out.ns9.test$n + grep "status: NXDOMAIN" dig.out.ns9.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n + 1)) + ret=0 + echo_i "check ms-subdomain match ($n)" + KRB5CCNAME="FILE:$(pwd)/ns9/machine.ccache" + export KRB5CCNAME + $NSUPDATE -d << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.9 ${PORT} + zone example.com + update add _xxx._tcp.example.com 3600 IN SRV 0 0 0 machine.example.com + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.9 _xxx._tcp.example.com SRV > dig.out.ns9.test$n + grep "status: NOERROR" dig.out.ns9.test$n > /dev/null || ret=1 + grep "_xxx._tcp.example.com.*SRV.*0 0 0 machine.example.com" dig.out.ns9.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n + 1)) + ret=0 + echo_i "check ms-subdomain no-match ($n)" + KRB5CCNAME="FILE:$(pwd)/ns9/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.9 ${PORT} + zone example.com + update add _xxx._udp.example.com 3600 IN SRV 0 0 0 machine.example.com + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.9 _xxx._udp.example.com SRV > dig.out.ns9.test$n + grep "status: NXDOMAIN" dig.out.ns9.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check ms-subdomain-self-rhs match (PTR) ($n)" + KRB5CCNAME="FILE:$(pwd)/ns10/machine.ccache" + export KRB5CCNAME + $NSUPDATE -d << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.10 ${PORT} + zone in-addr.arpa + update add 4.3.2.1.in-addr.arpa 3600 IN PTR machine.example.com + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.10 4.3.2.1.in-addr.arpa PTR > dig.out.ns10.test$n + grep "status: NOERROR" dig.out.ns10.test$n > /dev/null || ret=1 + grep "4.3.2.1.in-addr.arpa.*PTR.*machine.example.com" dig.out.ns10.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check ms-subdomain-self-rhs no-match (PTR) ($n)" + KRB5CCNAME="FILE:$(pwd)/ns10/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.10 ${PORT} + zone in-addr.arpa + update add 5.3.2.1.in-addr.arpa 3600 IN PTR notme.example.com + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.10 5.3.2.1.in-addr.arpa PTR > dig.out.ns10.test$n + grep "status: NXDOMAIN" dig.out.ns10.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check ms-subdomain-self-rhs match (SRV) ($n)" + KRB5CCNAME="FILE:$(pwd)/ns10/machine.ccache" + export KRB5CCNAME + $NSUPDATE -d << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.10 ${PORT} + zone example.com + update add _xxx.self-srv.example.com 3600 IN SRV 0 0 0 machine.example.com + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.10 _xxx.self-srv.example.com SRV > dig.out.ns10.test$n + grep "status: NOERROR" dig.out.ns10.test$n > /dev/null || ret=1 + grep "_xxx.self-srv.example.com.*SRV.*0 0 0 machine.example.com" dig.out.ns10.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check ms-subdomain-self-rhs no-match (SRV) ($n)" + KRB5CCNAME="FILE:$(pwd)/ns10/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.10 ${PORT} + zone example.com + update add _yyy.self-srv.example.com 3600 IN SRV 0 0 0 notme.example.com + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.10 _yyy.self-srv.example.com SRV > dig.out.ns10.test$n + grep "status: NXDOMAIN" dig.out.ns10.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check ms-subdomain-self-rhs delete SRV (matching SRV) ($n)" + $DIG $DIGOPTS +tcp @10.53.0.10 single.srv.self-srv.example.com SRV > dig.out.ns10.pre.test$n + grep "status: NOERROR" dig.out.ns10.pre.test$n > /dev/null || ret=1 + grep "ANSWER: 1," dig.out.ns10.pre.test$n > /dev/null || ret=1 + KRB5CCNAME="FILE:$(pwd)/ns10/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.10 ${PORT} + zone example.com + update delete single.srv.self-srv.example.com SRV + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.10 single.srv.self-srv.example.com SRV > dig.out.ns10.test$n + grep "status: NXDOMAIN" dig.out.ns10.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check ms-subdomain-self-rhs delete SRV (matching SRV with non-matching SRV) ($n)" + KRB5CCNAME="FILE:$(pwd)/ns10/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.10 ${PORT} + zone example.com + update delete many.srv.self-srv.example.com SRV + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.10 many.srv.self-srv.example.com SRV > dig.out.ns10.test$n + grep "status: NOERROR" dig.out.ns10.test$n > /dev/null || ret=1 + grep "ANSWER: 2," dig.out.ns10.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check ms-subdomain-self-rhs delete PTR (matching PTR) ($n)" + $DIG $DIGOPTS +tcp @10.53.0.10 single.ptr.self-ptr.in-addr.arpa PTR > dig.out.ns10.pre.test$n + grep "status: NOERROR" dig.out.ns10.pre.test$n > /dev/null || ret=1 + grep "ANSWER: 1," dig.out.ns10.pre.test$n > /dev/null || ret=1 + KRB5CCNAME="FILE:$(pwd)/ns10/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.10 ${PORT} + zone in-addr.arpa + update delete single.ptr.self-ptr.in-addr.arpa PTR + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.10 single.ptr.self-ptr.in-addr.arpa PTR > dig.out.ns10.test$n + grep "status: NXDOMAIN" dig.out.ns10.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check ms-subdomain-self-rhs delete PTR (matching PTR with non-matching PTR) ($n)" + KRB5CCNAME="FILE:$(pwd)/ns10/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.10 ${PORT} + zone in-addr.arpa + update delete many.ptr.self-ptr.in-addr.arpa PTR + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.10 many.ptr.self-ptr.in-addr.arpa PTR > dig.out.ns10.test$n + grep "status: NOERROR" dig.out.ns10.test$n > /dev/null || ret=1 + grep "ANSWER: 2," dig.out.ns10.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check ms-subdomain-self-rhs delete ANY (matching PTR) ($n)" + $DIG $DIGOPTS +tcp @10.53.0.10 single.any.self-ptr.in-addr.arpa PTR > dig.out.ns10.pre.test$n + grep "status: NOERROR" dig.out.ns10.pre.test$n > /dev/null || ret=1 + grep "ANSWER: 1," dig.out.ns10.pre.test$n > /dev/null || ret=1 + KRB5CCNAME="FILE:$(pwd)/ns10/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.10 ${PORT} + zone in-addr.arpa + update delete single.any.self-ptr.in-addr.arpa + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.10 single.any.self-ptr.in-addr.arpa PTR > dig.out.ns10.test$n + grep "status: NXDOMAIN" dig.out.ns10.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check ms-subdomain-self-rhs delete ANY (matching PTR with non-matching PTR) ($n)" + KRB5CCNAME="FILE:$(pwd)/ns10/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.10 ${PORT} + zone in-addr.arpa + update delete many.any.self-ptr.in-addr.arpa + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.10 many.any.self-ptr.in-addr.arpa PTR > dig.out.ns10.test$n + grep "status: NOERROR" dig.out.ns10.test$n > /dev/null || ret=1 + grep "ANSWER: 2," dig.out.ns10.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check ms-subdomain-self-rhs delete ANY (matching SRV) ($n)" + $DIG $DIGOPTS +tcp @10.53.0.10 single.any.self-srv.example.com SRV > dig.out.ns10.pre.test$n + grep "status: NOERROR" dig.out.ns10.pre.test$n > /dev/null || ret=1 + grep "ANSWER: 1," dig.out.ns10.pre.test$n > /dev/null || ret=1 + KRB5CCNAME="FILE:$(pwd)/ns10/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.10 ${PORT} + zone example.com + update delete single.any.self-srv.example.com + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.10 single.any.self-srv.example.com SRV > dig.out.ns10.test$n + grep "status: NXDOMAIN" dig.out.ns10.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n+1)) + ret=0 + echo_i "check ms-subdomain-self-rhs delete ANY (matching SRV with non-matching SRV) ($n)" + KRB5CCNAME="FILE:$(pwd)/ns10/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.10 ${PORT} + zone example.com + update delete many.any.self-srv.example.com + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.10 many.any.self-srv.example.com SRV > dig.out.ns10.test$n + grep "status: NOERROR" dig.out.ns10.test$n > /dev/null || ret=1 + grep "ANSWER: 2," dig.out.ns10.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n + 1)) + ret=0 + echo_i "check ms-selfsub match ($n)" + KRB5CCNAME="FILE:$(pwd)/ns10/machine.ccache" + export KRB5CCNAME + $NSUPDATE -d << EOF > nsupdate.out.test$n 2>&1 || ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.10 ${PORT} + zone example.com + update add xxx.machine.example.com 3600 IN A 10.53.0.10 + send +EOF + $DIG $DIGOPTS +tcp @10.53.0.10 xxx.machine.example.com A > dig.out.ns10.test$n + grep "status: NOERROR" dig.out.ns10.test$n > /dev/null || ret=1 + grep "xxx.machine.example.com..*A.*10.53.0.10" dig.out.ns10.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + + n=$((n + 1)) + ret=0 + echo_i "check ms-selfsub no-match ($n)" + KRB5CCNAME="FILE:$(pwd)/ns10/machine.ccache" + export KRB5CCNAME + $NSUPDATE << EOF > nsupdate.out.test$n 2>&1 && ret=1 + gsstsig + realm EXAMPLE.COM + server 10.53.0.10 ${PORT} + zone example.com + update add foo.example.com 3600 IN A 10.53.0.10 + send +EOF + grep "update failed: REFUSED" nsupdate.out.test$n > /dev/null || ret=1 + $DIG $DIGOPTS +tcp @10.53.0.10 foo.example.com A > dig.out.ns10.test$n + grep "status: NXDOMAIN" dig.out.ns10.test$n > /dev/null || ret=1 + [ $ret = 0 ] || { echo_i "failed"; status=1; } + +fi + +echo_i "exit status: $status" +[ $status -eq 0 ] || exit 1 -- cgit v1.2.3