#!/bin/sh # Copyright (C) Internet Systems Consortium, Inc. ("ISC") # # SPDX-License-Identifier: MPL-2.0 # # This Source Code Form is subject to the terms of the Mozilla Public # License, v. 2.0. If a copy of the MPL was not distributed with this # file, you can obtain one at https://mozilla.org/MPL/2.0/. # # See the COPYRIGHT file distributed with this work for additional # information regarding copyright ownership. set -e . ../conf.sh DIGOPTS="+tcp +noadd +nosea +nostat +noquest +nocomm +nocmd" DIGOPTS="" DIGCMD="$DIG $DIGOPTS -p ${PORT}" RNDCCMD="$RNDC -p ${CONTROLPORT} -c ../common/rndc.conf -s" status=0 n=0 n=$((n+1)) echo_i "preparing ($n)" ret=0 $NSUPDATE -p ${PORT} -k ns2/session.key > /dev/null 2>&1 < /dev/null && break sleep 1 done grep "addition 1" ns2/nil.db > /dev/null 2>&1 || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "checking journal file is still present ($n)" ret=0 [ -s ns2/nil.db.jnl ] || { echo_i "'test -s ns2/nil.db.jnl' failed when it shouldn't have"; ret=1; } if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "checking zone not writable ($n)" ret=0 $NSUPDATE -p ${PORT} -k ns2/session.key > /dev/null 2>&1 < dig.out.1.test$n || ret=1 grep 'addition 2' dig.out.1.test$n >/dev/null && ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) echo_i "rndc thaw" $RNDCCMD 10.53.0.2 thaw | sed 's/^/ns2 /' | cat_i n=$((n+1)) echo_i "checking zone now writable ($n)" ret=0 $NSUPDATE -p ${PORT} -k ns2/session.key > nsupdate.out.1.test$n 2>&1 < dig.out.1.test$n || ret=1 grep 'addition 3' dig.out.1.test$n >/dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) echo_i "rndc sync" ret=0 $RNDCCMD 10.53.0.2 sync nil | sed 's/^/ns2 /' | cat_i n=$((n+1)) echo_i "checking zone was dumped ($n)" ret=0 for i in 1 2 3 4 5 6 7 8 9 10 do grep "addition 3" ns2/nil.db > /dev/null && break sleep 1 done grep "addition 3" ns2/nil.db > /dev/null 2>&1 || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "checking journal file is still present ($n)" ret=0 [ -s ns2/nil.db.jnl ] || { echo_i "'test -s ns2/nil.db.jnl' failed when it shouldn't have"; ret=1; } if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "checking zone is still writable ($n)" ret=0 $NSUPDATE -p ${PORT} -k ns2/session.key > nsupdate.out.1.test$n 2>&1 < dig.out.1.test$n || ret=1 grep 'addition 4' dig.out.1.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) echo_i "rndc sync -clean" ret=0 $RNDCCMD 10.53.0.2 sync -clean nil | sed 's/^/ns2 /' | cat_i n=$((n+1)) echo_i "checking zone was dumped ($n)" ret=0 for i in 1 2 3 4 5 6 7 8 9 10 do grep "addition 4" ns2/nil.db > /dev/null && break sleep 1 done grep "addition 4" ns2/nil.db > /dev/null 2>&1 || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "checking journal file is deleted ($n)" ret=0 [ -s ns2/nil.db.jnl ] && { echo_i "'test -s ns2/nil.db.jnl' failed when it shouldn't have"; ret=1; } if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "checking zone is still writable ($n)" ret=0 $NSUPDATE -p ${PORT} -k ns2/session.key > /dev/null 2>&1 < dig.out.1.test$n || ret=1 grep 'addition 4' dig.out.1.test$n >/dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "checking other journal files not removed ($n)" ret=0 [ -s ns2/other.db.jnl ] || { echo_i "'test -s ns2/other.db.jnl' failed when it shouldn't have"; ret=1; } if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) echo_i "cleaning all zones ($n)" $RNDCCMD 10.53.0.2 sync -clean | sed 's/^/ns2 /' | cat_i n=$((n+1)) echo_i "checking all journals removed ($n)" ret=0 [ -s ns2/nil.db.jnl ] && { echo_i "'test -s ns2/nil.db.jnl' succeeded when it shouldn't have"; ret=1; } [ -s ns2/other.db.jnl ] && { echo_i "'test -s ns2/other.db.jnl' succeeded when it shouldn't have"; ret=1; } if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "checking that freezing static zones is not allowed ($n)" ret=0 $RNDCCMD 10.53.0.2 freeze static > rndc.out.1.test$n 2>&1 && ret=1 grep 'not dynamic' rndc.out.1.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "checking that journal is removed when serial is changed before thaw ($n)" ret=0 sleep 1 $NSUPDATE -p ${PORT} -k ns2/session.key > nsupdate.out.1.test$n 2>&1 <&1 | sed 's/^/ns2 /' | cat_i for i in 1 2 3 4 5 6 7 8 9 10 do grep "addition 6" ns2/other.db > /dev/null && break sleep 1 done serial=$(awk '$3 ~ /serial/ {print $1}' ns2/other.db) newserial=$((serial + 1)) sed s/$serial/$newserial/ ns2/other.db > ns2/other.db.new echo 'frozen TXT "frozen addition"' >> ns2/other.db.new mv -f ns2/other.db.new ns2/other.db $RNDCCMD 10.53.0.2 thaw 2>&1 | sed 's/^/ns2 /' | cat_i sleep 1 [ -f ns2/other.db.jnl ] && { echo_i "'test -f ns2/other.db.jnl' succeeded when it shouldn't have"; ret=1; } $NSUPDATE -p ${PORT} -k ns2/session.key > nsupdate.out.2.test$n 2>&1 < dig.out.1.test$n || ret=1 grep 'addition 6' dig.out.1.test$n >/dev/null || ret=1 $DIGCMD @10.53.0.2 text7.other. TXT > dig.out.2.test$n || ret=1 grep 'addition 7' dig.out.2.test$n >/dev/null || ret=1 $DIGCMD @10.53.0.2 frozen.other. TXT > dig.out.3.test$n || ret=1 grep 'frozen addition' dig.out.3.test$n >/dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "checking that journal is kept when ixfr-from-differences is in use ($n)" ret=0 $NSUPDATE -p ${PORT} -k ns2/session.key > nsupdate.out.1.test$n 2>&1 <&1 | sed 's/^/ns2 /' | cat_i for i in 1 2 3 4 5 6 7 8 9 10 do grep "addition 6" ns2/nil.db > /dev/null && break sleep 1 done serial=$(awk '$3 ~ /serial/ {print $1}' ns2/nil.db) newserial=$((serial + 1)) sed s/$serial/$newserial/ ns2/nil.db > ns2/nil.db.new echo 'frozen TXT "frozen addition"' >> ns2/nil.db.new mv -f ns2/nil.db.new ns2/nil.db $RNDCCMD 10.53.0.2 thaw 2>&1 | sed 's/^/ns2 /' | cat_i sleep 1 [ -s ns2/nil.db.jnl ] || { echo_i "'test -s ns2/nil.db.jnl' failed when it shouldn't have"; ret=1; } $NSUPDATE -p ${PORT} -k ns2/session.key > nsupdate.out.2.test$n 2>&1 < dig.out.1.test$n || ret=1 grep 'addition 6' dig.out.1.test$n > /dev/null || ret=1 $DIGCMD @10.53.0.2 text7.nil. TXT > dig.out.2.test$n || ret=1 grep 'addition 7' dig.out.2.test$n > /dev/null || ret=1 $DIGCMD @10.53.0.2 frozen.nil. TXT > dig.out.3.test$n || ret=1 grep 'frozen addition' dig.out.3.test$n >/dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) # temp test echo_i "dumping stats ($n)" $RNDCCMD 10.53.0.2 stats n=$((n+1)) echo_i "verifying adb records in named.stats ($n)" grep "ADB stats" ns2/named.stats > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "test using second key ($n)" ret=0 $RNDC -s 10.53.0.2 -p ${CONTROLPORT} -c ns2/secondkey.conf status > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "test 'rndc dumpdb' on a empty cache ($n)" ret=0 rndc_dumpdb ns3 || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "test 'rndc reload' on a zone with include files ($n)" ret=0 grep "incl/IN: skipping load" ns2/named.run > /dev/null && ret=1 loads=$(grep "incl/IN: starting load" ns2/named.run | wc -l) [ "$loads" -eq 1 ] || ret=1 $RNDCCMD 10.53.0.2 reload > /dev/null || ret=1 for i in 1 2 3 4 5 6 7 8 9 do tmp=0 grep "incl/IN: skipping load" ns2/named.run > /dev/null || tmp=1 [ $tmp -eq 0 ] && break sleep 1 done [ $tmp -eq 1 ] && ret=1 touch ns2/static.db $RNDCCMD 10.53.0.2 reload > /dev/null || ret=1 for i in 1 2 3 4 5 6 7 8 9 do tmp=0 loads=$(grep "incl/IN: starting load" ns2/named.run | wc -l) [ "$loads" -eq 2 ] || tmp=1 [ $tmp -eq 0 ] && break sleep 1 done [ $tmp -eq 1 ] && ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) if $FEATURETEST --md5; then echo_i "testing rndc with hmac-md5 ($n)" ret=0 $RNDC -s 10.53.0.4 -p ${EXTRAPORT1} -c ns4/key1.conf status > /dev/null 2>&1 || ret=1 for i in 2 3 4 5 6 do $RNDC -s 10.53.0.4 -p ${EXTRAPORT1} -c ns4/key${i}.conf status > /dev/null 2>&1 && ret=1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) else echo_i "skipping rndc with hmac-md5 ($n)" fi n=$((n+1)) echo_i "testing rndc with hmac-sha1 ($n)" ret=0 $RNDC -s 10.53.0.4 -p ${EXTRAPORT2} -c ns4/key2.conf status > /dev/null 2>&1 || ret=1 for i in 1 3 4 5 6 do $RNDC -s 10.53.0.4 -p ${EXTRAPORT2} -c ns4/key${i}.conf status > /dev/null 2>&1 && ret=1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "testing rndc with hmac-sha224 ($n)" ret=0 $RNDC -s 10.53.0.4 -p ${EXTRAPORT3} -c ns4/key3.conf status > /dev/null 2>&1 || ret=1 for i in 1 2 4 5 6 do $RNDC -s 10.53.0.4 -p ${EXTRAPORT3} -c ns4/key${i}.conf status > /dev/null 2>&1 && ret=1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "testing rndc with hmac-sha256 ($n)" ret=0 $RNDC -s 10.53.0.4 -p ${EXTRAPORT4} -c ns4/key4.conf status > /dev/null 2>&1 || ret=1 for i in 1 2 3 5 6 do $RNDC -s 10.53.0.4 -p ${EXTRAPORT4} -c ns4/key${i}.conf status > /dev/null 2>&1 && ret=1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "testing rndc with hmac-sha384 ($n)" ret=0 $RNDC -s 10.53.0.4 -p ${EXTRAPORT5} -c ns4/key5.conf status > /dev/null 2>&1 || ret=1 for i in 1 2 3 4 6 do $RNDC -s 10.53.0.4 -p ${EXTRAPORT5} -c ns4/key${i}.conf status > /dev/null 2>&1 && ret=1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "testing rndc with hmac-sha512 ($n)" ret=0 $RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key6.conf status > /dev/null 2>&1 || ret=1 for i in 1 2 3 4 5 do $RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key${i}.conf status > /dev/null 2>&1 2>&1 && ret=1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "testing single control channel with multiple algorithms ($n)" ret=0 for i in 1 2 3 4 5 6 do $RNDC -s 10.53.0.4 -p ${EXTRAPORT7} -c ns4/key${i}.conf status > /dev/null 2>&1 || ret=1 done if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "testing automatic zones are reported ($n)" ret=0 $RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key6.conf status > rndc.out.1.test$n || ret=1 grep "number of zones: 201 (198 automatic)" rndc.out.1.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "testing rndc with null command ($n)" ret=0 $RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key6.conf null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "testing rndc with unknown control channel command ($n)" ret=0 $RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key6.conf obviouslynotacommand >/dev/null 2>&1 && ret=1 # rndc: 'obviouslynotacommand' failed: unknown command if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "testing rndc with querylog command ($n)" ret=0 # first enable it with querylog on option $RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key6.conf querylog on >/dev/null 2>&1 || ret=1 grep "query logging is now on" ns4/named.run > /dev/null || ret=1 # query for builtin and check if query was logged (without +subnet) $DIG @10.53.0.4 -p ${PORT} -c ch -t txt foo12345.bind +qr > dig.out.1.test$n 2>&1 || ret=1 grep "query: foo12345.bind CH TXT.*(.*)$" ns4/named.run > /dev/null || ret=1 # query for another builtin zone and check if query was logged (with +subnet=127.0.0.1) $DIG +subnet=127.0.0.1 @10.53.0.4 -p ${PORT} -c ch -t txt foo12346.bind +qr > dig.out.2.test$n 2>&1 || ret=1 grep "query: foo12346.bind CH TXT.*\[ECS 127\.0\.0\.1/32/0]" ns4/named.run > /dev/null || ret=1 # query for another builtin zone and check if query was logged (with +subnet=127.0.0.1/24) $DIG +subnet=127.0.0.1/24 @10.53.0.4 -p ${PORT} -c ch -t txt foo12347.bind +qr > dig.out.3.test$n 2>&1 || ret=1 grep "query: foo12347.bind CH TXT.*\[ECS 127\.0\.0\.0/24/0]" ns4/named.run > /dev/null || ret=1 # query for another builtin zone and check if query was logged (with +subnet=::1) $DIG +subnet=::1 @10.53.0.4 -p ${PORT} -c ch -t txt foo12348.bind +qr > dig.out.4.test$n 2>&1 || ret=1 grep "query: foo12348.bind CH TXT.*\[ECS ::1/128/0]" ns4/named.run > /dev/null || ret=1 # toggle query logging and check again $RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key6.conf querylog > /dev/null 2>&1 || ret=1 grep "query logging is now off" ns4/named.run > /dev/null || ret=1 # query for another builtin zone and check if query was logged (without +subnet) $DIG @10.53.0.4 -p ${PORT} -c ch -t txt foo9876.bind +qr > dig.out.5.test$n 2>&1 || ret=1 grep "query: foo9876.bind CH TXT.*(.*)$" ns4/named.run > /dev/null && ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) RNDCCMD4="$RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key6.conf" n=$((n+1)) echo_i "testing rndc nta time limits ($n)" ret=0 $RNDCCMD4 nta -l 2h nta1.example > rndc.out.1.test$n 2>&1 grep "Negative trust anchor added" rndc.out.1.test$n > /dev/null || ret=1 $RNDCCMD4 nta -l 1d nta2.example > rndc.out.2.test$n 2>&1 grep "Negative trust anchor added" rndc.out.2.test$n > /dev/null || ret=1 $RNDCCMD4 nta -l 1w nta3.example > rndc.out.3.test$n 2>&1 grep "Negative trust anchor added" rndc.out.3.test$n > /dev/null || ret=1 $RNDCCMD4 nta -l 8d nta4.example > rndc.out.4.test$n 2>&1 && ret=1 grep "NTA lifetime cannot exceed one week" rndc.out.4.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "testing rndc nta -class option ($n)" ret=0 nextpart ns4/named.run > /dev/null $RNDCCMD4 nta -c in nta1.example > rndc.out.1.test$n 2>&1 nextpart ns4/named.run | grep "added NTA 'nta1.example'" > /dev/null || ret=1 $RNDCCMD4 nta -c any nta1.example > rndc.out.2.test$n 2>&1 nextpart ns4/named.run | grep "added NTA 'nta1.example'" > /dev/null || ret=1 $RNDCCMD4 nta -c ch nta1.example > rndc.out.3.test$n 2>&1 nextpart ns4/named.run | grep "added NTA 'nta1.example'" > /dev/null && ret=1 $RNDCCMD4 nta -c fake nta1.example > rndc.out.4.test$n 2>&1 && ret=1 nextpart ns4/named.run | grep "added NTA 'nta1.example'" > /dev/null && ret=1 grep 'unknown class' rndc.out.4.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) for i in 512 1024 2048 4096 8192 16384 32768 65536 131072 262144 524288 do n=$((n+1)) echo_i "testing rndc buffer size limits (size=${i}) ($n)" ret=0 $RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key6.conf testgen ${i} 2>&1 > rndc.out.$i.test$n || ret=1 { actual_size=$($GENCHECK rndc.out.$i.test$n); rc=$?; } || true if [ "$rc" = "0" ]; then expected_size=$((i+1)) if [ $actual_size != $expected_size ]; then ret=1; fi else ret=1 fi if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) done n=$((n+1)) echo_i "testing rndc -r (show result) ($n)" ret=0 $RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key6.conf -r testgen 0 2>&1 > rndc.out.1.test$n || ret=1 grep "ISC_R_SUCCESS 0" rndc.out.1.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "testing rndc with a token containing a space ($n)" ret=0 $RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key6.conf -r flush '"view with a space"' 2>&1 > rndc.out.1.test$n || ret=1 grep "not found" rndc.out.1.test$n > /dev/null && ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "test 'rndc reconfig' with a broken config ($n)" ret=0 $RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key6.conf reconfig > /dev/null || ret=1 sleep 1 mv ns4/named.conf ns4/named.conf.save echo "error error error" >> ns4/named.conf $RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key6.conf reconfig > rndc.out.1.test$n 2>&1 && ret=1 grep "rndc: 'reconfig' failed: unexpected token" rndc.out.1.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "check rndc status reports failure ($n)" ret=0 $RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key6.conf status > rndc.out.1.test$n 2>&1 || ret=1 grep "reload/reconfig failed" rndc.out.1.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "restore working config ($n)" ret=0 mv ns4/named.conf.save ns4/named.conf sleep 1 $RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key6.conf reconfig > /dev/null || ret=1 sleep 1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "check 'rndc status' 'reload/reconfig failure' is cleared after successful reload/reconfig ($n)" ret=0 $RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key6.conf status > rndc.out.1.test$n 2>&1 || ret=1 grep "reload/reconfig failed" rndc.out.1.test$n > /dev/null && ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "test read-only control channel access ($n)" ret=0 $RNDCCMD 10.53.0.5 status > rndc.out.1.test$n 2>&1 || ret=1 $RNDCCMD 10.53.0.5 nta -dump > rndc.out.2.test$n 2>&1 || ret=1 $RNDCCMD 10.53.0.5 reconfig > rndc.out.3.test$n 2>&1 && ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "test rndc status shows running on ($n)" ret=0 $RNDCCMD 10.53.0.5 status > rndc.out.1.test$n 2>&1 || ret=1 grep "^running on " rndc.out.1.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "test 'rndc reconfig' with loading of a large zone ($n)" ret=0 nextpart ns6/named.run > /dev/null cp ns6/named.conf ns6/named.conf.save echo "zone \"huge.zone\" { type primary; file \"huge.zone.db\"; };" >> ns6/named.conf echo_i "reloading config" $RNDCCMD 10.53.0.6 reconfig > rndc.out.1.test$n 2>&1 || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) sleep 1 n=$((n+1)) echo_i "check if zone load was scheduled ($n)" wait_for_log_peek 20 "scheduled loading new zones" ns6/named.run || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "check if query for the zone returns SERVFAIL ($n)" $DIG @10.53.0.6 -p ${PORT} -t soa huge.zone > dig.out.1.test$n grep "SERVFAIL" dig.out.1.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed (ignored)"; ret=0; fi status=$((status+ret)) n=$((n+1)) echo_i "wait for the zones to be loaded ($n)" wait_for_log_peek 60 "huge.zone/IN: loaded serial" ns6/named.run || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "check if query for the zone returns NOERROR ($n)" $DIG @10.53.0.6 -p ${PORT} -t soa huge.zone > dig.out.1.test$n grep "NOERROR" dig.out.1.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "verify that the full command is logged ($n)" ret=0 $RNDCCMD 10.53.0.2 null with extra arguments > /dev/null 2>&1 grep "received control channel command 'null with extra arguments'" ns2/named.run > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) mv ns6/named.conf.save ns6/named.conf sleep 1 $RNDCCMD 10.53.0.6 reconfig > /dev/null || ret=1 sleep 1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "check 'rndc \"\"' is handled ($n)" ret=0 $RNDCCMD 10.53.0.2 "" > rndc.out.1.test$n 2>&1 && ret=1 grep "rndc: '' failed: failure" rndc.out.1.test$n > /dev/null if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "check rndc -4 -6 ($n)" ret=0 $RNDCCMD 10.53.0.2 -4 -6 status > rndc.out.1.test$n 2>&1 && ret=1 grep "only one of -4 and -6 allowed" rndc.out.1.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "check rndc -4 with an IPv6 server address ($n)" ret=0 $RNDCCMD fd92:7065:b8e:ffff::2 -4 status > rndc.out.1.test$n 2>&1 && ret=1 grep "address family not supported" rndc.out.1.test$n > /dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "check rndc nta reports adding to multiple views ($n)" ret=0 $RNDCCMD 10.53.0.3 nta test.com > rndc.out.test$n 2>&1 || ret=1 lines=$(cat rndc.out.test$n | wc -l) [ ${lines:-0} -eq 2 ] || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "check 'rndc retransfer' of primary error message ($n)" ret=0 $RNDCCMD 10.53.0.2 retransfer nil > rndc.out.test$n 2>&1 && ret=1 grep "rndc: 'retransfer' failed: failure" rndc.out.test$n > /dev/null || ret=1 grep "retransfer: inappropriate zone type: primary" rndc.out.test$n > /dev/null || ret=1 lines=$(cat rndc.out.test$n | wc -l) [ ${lines:-0} -eq 2 ] || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "check 'rndc freeze' with in-view zones works ($n)" ret=0 $RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key6.conf freeze > rndc.out.test$n 2>&1 || ret=1 test -s rndc.out.test$n && sed 's/^/ns2 /' rndc.out.test$n | cat_i if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "checking non in-view zone instance is not writable ($n)" ret=0 $NSUPDATE -p ${PORT} > /dev/null 2>&1 < dig.out.1.test$n || ret=1 grep 'addition 3' dig.out.1.test$n >/dev/null && ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "check 'rndc thaw' with in-view zones works ($n)" ret=0 $RNDC -s 10.53.0.4 -p ${EXTRAPORT6} -c ns4/key6.conf thaw > rndc.out.test$n 2>&1 || ret=1 test -s rndc.out.test$n && sed 's/^/ns2 /' rndc.out.test$n | cat_i if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "checking non in-view zone instance is now writable ($n)" ret=0 $NSUPDATE -p ${PORT} > nsupdate.out.test$n 2>&1 < dig.out.1.test$n || ret=1 grep 'addition 3' dig.out.1.test$n >/dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) n=$((n+1)) echo_i "checking initial in-view zone file is loaded ($n)" ret=0 TSIG="$DEFAULT_HMAC:int:FrSt77yPTFx6hTs4i2tKLB9LmE0=" $DIGCMD @10.53.0.7 -y "$TSIG" text1.test. TXT > dig.out.1.test$n || ret=1 grep 'include 1' dig.out.1.test$n >/dev/null || ret=1 TSIG="$DEFAULT_HMAC:ext:FrSt77yPTFx6hTs4i2tKLB9LmE0=" $DIGCMD @10.53.0.7 -y "$TSIG" text1.test. TXT > dig.out.2.test$n || ret=1 grep 'include 1' dig.out.2.test$n >/dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) echo_i "update in-view zone ($n)" ret=0 TSIG="$DEFAULT_HMAC:int:FrSt77yPTFx6hTs4i2tKLB9LmE0=" $NSUPDATE -p ${PORT} -y "$TSIG" > /dev/null 2>&1 < dig.out.1.test$n || ret=1 grep 'addition 1' dig.out.1.test$n >/dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) nextpart ns7/named.run > /dev/null echo_i "rndc freeze" $RNDCCMD 10.53.0.7 freeze | sed 's/^/ns7 /' | cat_i | cat_i wait_for_log 3 "dump_done: zone test/IN/internal: enter" ns7/named.run echo_i "edit zone files" cp ns7/test.db.in ns7/test.db cp ns7/include2.db.in ns7/include.db echo_i "rndc thaw" $RNDCCMD 10.53.0.7 thaw | sed 's/^/ns7 /' | cat_i wait_for_log 3 "zone_postload: zone test/IN/internal: done" ns7/named.run echo_i "rndc reload" $RNDCCMD 10.53.0.7 reload | sed 's/^/ns7 /' | cat_i wait_for_log 3 "all zones loaded" ns7/named.run n=$((n+1)) echo_i "checking zone file edits are loaded ($n)" ret=0 TSIG="$DEFAULT_HMAC:int:FrSt77yPTFx6hTs4i2tKLB9LmE0=" $DIGCMD @10.53.0.7 -y "$TSIG" text1.test. TXT > dig.out.1.test$n || ret=1 grep 'include 2' dig.out.1.test$n >/dev/null || ret=1 TSIG="$DEFAULT_HMAC:ext:FrSt77yPTFx6hTs4i2tKLB9LmE0=" $DIGCMD @10.53.0.7 -y "$TSIG" text1.test. TXT > dig.out.2.test$n || ret=1 grep 'include 2' dig.out.2.test$n >/dev/null || ret=1 if [ $ret != 0 ]; then echo_i "failed"; fi status=$((status+ret)) echo_i "exit status: $status" [ $status -eq 0 ] || exit 1