Adding upstream version 16.2.11+ds.upstream/16.2.11+dsupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 103 insertions, 0 deletions

diff --git a/src/spdk/test/nvme/perf/README.md b/src/spdk/test/nvme/perf/README.md
new file mode 100644
index 000000000..3e0b4aa30
--- /dev/null
+++ b/src/spdk/test/nvme/perf/README.md
@@ -0,0 +1,103 @@
+# Automated script for NVMe performance test
+
+## Compile SPDK with LTO
+
+The link time optimization (lto) gcc flag allows the linker to run a post-link optimization pass on the code. During that pass the linker inlines thin wrappers such as those around DPDK calls which results in a shallow call stack and significantly improves performance. Therefore, we recommend compiling SPDK with the lto flag prior to running this benchmark script to archieve optimal performance.
+Link time optimization can be enabled in SPDK by doing the following:
+
+~{.sh}
+./configure --enable-lto
+~
+
+## Configuration
+
+Test is configured by using command-line options.
+
+### Available options
+
+#### -h, --help
+
+Prints available commands and help.
+
+#### --run-time
+
+Tell fio to terminate processing after the specified period of time. Value in seconds.
+
+#### --ramp-time
+
+Fio will run the specified workload for this amount of time before logging any performance numbers.
+Value in seconds.
+
+#### --fio-bin
+
+Path to fio binary.
+
+#### --driver
+
+Select between SPDK driver and kernel driver. The Linux Kernel driver has three configurations:
+Default mode, Hybrid Polling and Classic Polling. The SPDK driver supports 2 fio_plugin modes: bdev and NVMe PMD. Before running test with spdk, you will need to bind NVMe devics to the Linux uio_pci_generic or vfio-pci driver.  When running test with the Kernel driver, NVMe devices use the Kernel driver. The 5 valid values for this option are:
+'bdev', 'nvme', 'kernel-libaio', 'kernel-classic-polling' and 'kernel-hybrid-polling'.
+
+#### --max-disk
+
+This option will run multiple fio jobs with varying number of NVMe devices. First it will start with
+max-disk number of devices then decrease number of disk by two until there are no more devices.
+If set to 'all' then max-disk number will be set to all available devices.
+Only one of the max-disk or disk-no option can be used.
+
+#### --disk-no
+
+This option will run fio job on specified number of NVMe devices. If set to 'all' then max-disk number
+will be set to all available devices. Only one of the max-disk or disk-no option can be used.
+
+#### --cpu-allowed
+
+Specifies the CPU cores that will be used by fio to execute the performance test cases. When spdk driver is chosen, Nthe script attempts to assign NVMe devices to CPU cores on the same NUMA node. The script will try to align each core with devices matching
+core's NUMA first but if the is no devices left within the CPU core NUMA then it will use devices from the other
+NUMA node. It is important to choose cores that will ensure best NUMA node alignment. For example:
+On System with 8 devices on NUMA node 0 and 8 devices on NUMA node 1, cores 0-27 on numa node 0 and 28-55
+on numa node 1, if test is set to use 16 disk and four cores then "--cpu-allowed=1,2,28,29" can be used
+resulting with 4 devices with node0 per core 1 and 2 and 4 devices with node1 per core 28 and 29. If 10 cores
+are required then best option would be "--cpu-allowed=1,2,3,4,28,29,30,31,32,33" because cores 1-4 will be
+aligned with 2 devices on numa0 per core and cores 28-33 will be aligned with 1 device on numa1 per core.
+If kernel driver is chosen then for each job with NVME device, all cpu cores with corresponding NUMA node are picked.
+
+#### --rw
+
+Type of I/O pattern.  Accepted values are: randrw, rw
+
+#### --rwmixread
+
+Percentage of a mixed workload that should be reads.
+
+#### --iodepth
+
+Number of I/O units to keep in flight against each file.
+
+#### --block-size
+
+The block size in bytes used for I/O units.
+
+#### --numjobs
+
+Create the specified number of clones of a job.
+
+#### --repeat-no
+
+Specifies how many times run each workload. End results are averages of these workloads
+
+#### --no-preconditioning
+
+By default disks are preconditioned before test using fio with parameters: size=100%, loops=2, bs=1M, w=write,
+iodepth=32, ioengine=spdk. It can be skiped when this option is set.
+
+#### "--no-io-scaling"
+
+For SPDK fio plugin iodepth is multiplied by number of devices. When this option is set this multiplication will be disabled.
+
+## Results
+
+Results are stored in "results" folder. After each workload, to this folder are copied files with:
+fio configuration file, json files with fio results and logs with latiencies with sampling interval 250 ms.
+Number of copied files depends from number of repeats of each workload. Additionall csv file is created with averaged
+results of all workloads.