diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:45:59 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:45:59 +0000 |
commit | 19fcec84d8d7d21e796c7624e521b60d28ee21ed (patch) | |
tree | 42d26aa27d1e3f7c0b8bd3fd14e7d7082f5008dc /src/zstd/programs/zstd.1.md | |
parent | Initial commit. (diff) | |
download | ceph-upstream.tar.xz ceph-upstream.zip |
Adding upstream version 16.2.11+ds.upstream/16.2.11+dsupstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | src/zstd/programs/zstd.1.md | 562 |
1 files changed, 562 insertions, 0 deletions
diff --git a/src/zstd/programs/zstd.1.md b/src/zstd/programs/zstd.1.md new file mode 100644 index 000000000..550e2e53f --- /dev/null +++ b/src/zstd/programs/zstd.1.md @@ -0,0 +1,562 @@ +zstd(1) -- zstd, zstdmt, unzstd, zstdcat - Compress or decompress .zst files +============================================================================ + +SYNOPSIS +-------- + +`zstd` [*OPTIONS*] [-|_INPUT-FILE_] [-o _OUTPUT-FILE_] + +`zstdmt` is equivalent to `zstd -T0` + +`unzstd` is equivalent to `zstd -d` + +`zstdcat` is equivalent to `zstd -dcf` + + +DESCRIPTION +----------- +`zstd` is a fast lossless compression algorithm and data compression tool, +with command line syntax similar to `gzip (1)` and `xz (1)`. +It is based on the **LZ77** family, with further FSE & huff0 entropy stages. +`zstd` offers highly configurable compression speed, +with fast modes at > 200 MB/s per core, +and strong modes nearing lzma compression ratios. +It also features a very fast decoder, with speeds > 500 MB/s per core. + +`zstd` command line syntax is generally similar to gzip, +but features the following differences : + + - Source files are preserved by default. + It's possible to remove them automatically by using the `--rm` command. + - When compressing a single file, `zstd` displays progress notifications + and result summary by default. + Use `-q` to turn them off. + - `zstd` does not accept input from console, + but it properly accepts `stdin` when it's not the console. + - `zstd` displays a short help page when command line is an error. + Use `-q` to turn it off. + +`zstd` compresses or decompresses each _file_ according to the selected +operation mode. +If no _files_ are given or _file_ is `-`, `zstd` reads from standard input +and writes the processed data to standard output. +`zstd` will refuse to write compressed data to standard output +if it is a terminal : it will display an error message and skip the _file_. +Similarly, `zstd` will refuse to read compressed data from standard input +if it is a terminal. + +Unless `--stdout` or `-o` is specified, _files_ are written to a new file +whose name is derived from the source _file_ name: + +* When compressing, the suffix `.zst` is appended to the source filename to + get the target filename. +* When decompressing, the `.zst` suffix is removed from the source filename to + get the target filename + +### Concatenation with .zst files +It is possible to concatenate `.zst` files as is. +`zstd` will decompress such files as if they were a single `.zst` file. + +OPTIONS +------- + +### Integer suffixes and special values +In most places where an integer argument is expected, +an optional suffix is supported to easily indicate large integers. +There must be no space between the integer and the suffix. + +* `KiB`: + Multiply the integer by 1,024 (2\^10). + `Ki`, `K`, and `KB` are accepted as synonyms for `KiB`. +* `MiB`: + Multiply the integer by 1,048,576 (2\^20). + `Mi`, `M`, and `MB` are accepted as synonyms for `MiB`. + +### Operation mode +If multiple operation mode options are given, +the last one takes effect. + +* `-z`, `--compress`: + Compress. + This is the default operation mode when no operation mode option is specified + and no other operation mode is implied from the command name + (for example, `unzstd` implies `--decompress`). +* `-d`, `--decompress`, `--uncompress`: + Decompress. +* `-t`, `--test`: + Test the integrity of compressed _files_. + This option is equivalent to `--decompress --stdout` except that the + decompressed data is discarded instead of being written to standard output. + No files are created or removed. +* `-b#`: + Benchmark file(s) using compression level # +* `--train FILEs`: + Use FILEs as a training set to create a dictionary. + The training set should contain a lot of small files (> 100). +* `-l`, `--list`: + Display information related to a zstd compressed file, such as size, ratio, and checksum. + Some of these fields may not be available. + This command can be augmented with the `-v` modifier. + +### Operation modifiers + +* `-#`: + `#` compression level \[1-19] (default: 3) +* `--fast[=#]`: + switch to ultra-fast compression levels. + If `=#` is not present, it defaults to `1`. + The higher the value, the faster the compression speed, + at the cost of some compression ratio. + This setting overwrites compression level if one was set previously. + Similarly, if a compression level is set after `--fast`, it overrides it. +* `--ultra`: + unlocks high compression levels 20+ (maximum 22), using a lot more memory. + Note that decompression will also require more memory when using these levels. +* `--long[=#]`: + enables long distance matching with `#` `windowLog`, if not `#` is not + present it defaults to `27`. + This increases the window size (`windowLog`) and memory usage for both the + compressor and decompressor. + This setting is designed to improve the compression ratio for files with + long matches at a large distance. + + Note: If `windowLog` is set to larger than 27, `--long=windowLog` or + `--memory=windowSize` needs to be passed to the decompressor. +* `--patch-from=FILE`: + Specify the file to be used as a reference point for zstd's diff engine. + This is effectively dictionary compression with some convenient parameter + selection, namely that windowSize > srcSize. + + Note: cannot use both this and -D together + Note: `--long` mode will be automatically activated if chainLog < fileLog + (fileLog being the windowLog requried to cover the whole file). You + can also manually force it. + Node: for all levels, you can use --patch-from in --single-thread mode + to improve compression ratio at the cost of speed + Note: for level 19, you can get increased compression ratio at the cost + of speed by specifying `--zstd=targetLength=` to be something large + (i.e 4096), and by setting a large `--zstd=chainLog=` +* `-M#`, `--memory=#`: + Set a memory usage limit. By default, Zstandard uses 128 MB for decompression + as the maximum amount of memory the decompressor is allowed to use, but you can + override this manually if need be in either direction (ie. you can increase or + decrease it). + + This is also used during compression when using with --patch-from=. In this case, + this parameter overrides that maximum size allowed for a dictionary. (128 MB). +* `-T#`, `--threads=#`: + Compress using `#` working threads (default: 1). + If `#` is 0, attempt to detect and use the number of physical CPU cores. + In all cases, the nb of threads is capped to ZSTDMT_NBTHREADS_MAX==200. + This modifier does nothing if `zstd` is compiled without multithread support. +* `--single-thread`: + Does not spawn a thread for compression, use a single thread for both I/O and compression. + In this mode, compression is serialized with I/O, which is slightly slower. + (This is different from `-T1`, which spawns 1 compression thread in parallel of I/O). + This mode is the only one available when multithread support is disabled. + Single-thread mode features lower memory usage. + Final compressed result is slightly different from `-T1`. +* `--adapt[=min=#,max=#]` : + `zstd` will dynamically adapt compression level to perceived I/O conditions. + Compression level adaptation can be observed live by using command `-v`. + Adaptation can be constrained between supplied `min` and `max` levels. + The feature works when combined with multi-threading and `--long` mode. + It does not work with `--single-thread`. + It sets window size to 8 MB by default (can be changed manually, see `wlog`). + Due to the chaotic nature of dynamic adaptation, compressed result is not reproducible. + _note_ : at the time of this writing, `--adapt` can remain stuck at low speed + when combined with multiple worker threads (>=2). +* `--stream-size=#` : + Sets the pledged source size of input coming from a stream. This value must be exact, as it + will be included in the produced frame header. Incorrect stream sizes will cause an error. + This information will be used to better optimize compression parameters, resulting in + better and potentially faster compression, especially for smaller source sizes. +* `--size-hint=#`: + When handling input from a stream, `zstd` must guess how large the source size + will be when optimizing compression parameters. If the stream size is relatively + small, this guess may be a poor one, resulting in a higher compression ratio than + expected. This feature allows for controlling the guess when needed. + Exact guesses result in better compression ratios. Overestimates result in slightly + degraded compression ratios, while underestimates may result in significant degradation. +* `--rsyncable` : + `zstd` will periodically synchronize the compression state to make the + compressed file more rsync-friendly. There is a negligible impact to + compression ratio, and the faster compression levels will see a small + compression speed hit. + This feature does not work with `--single-thread`. You probably don't want + to use it with long range mode, since it will decrease the effectiveness of + the synchronization points, but your milage may vary. +* `-D file`: + use `file` as Dictionary to compress or decompress FILE(s) +* `--no-dictID`: + do not store dictionary ID within frame header (dictionary compression). + The decoder will have to rely on implicit knowledge about which dictionary to use, + it won't be able to check if it's correct. +* `-o file`: + save result into `file` (only possible with a single _INPUT-FILE_) +* `-f`, `--force`: + overwrite output without prompting, and (de)compress symbolic links +* `-c`, `--stdout`: + force write to standard output, even if it is the console +* `--[no-]sparse`: + enable / disable sparse FS support, + to make files with many zeroes smaller on disk. + Creating sparse files may save disk space and speed up decompression by + reducing the amount of disk I/O. + default: enabled when output is into a file, + and disabled when output is stdout. + This setting overrides default and can force sparse mode over stdout. +* `--[no-]content-size`: + enable / disable whether or not the original size of the file is placed in + the header of the compressed file. The default option is + --content-size (meaning that the original size will be placed in the header). +* `--rm`: + remove source file(s) after successful compression or decompression +* `-k`, `--keep`: + keep source file(s) after successful compression or decompression. + This is the default behavior. +* `-r`: + operate recursively on directories +* `--filelist=FILE` + read a list of files to process as content from `FILE`. + Format is compatible with `ls` output, with one file per line. +* `--output-dir-flat[=dir]`: + resulting files are stored into target `dir` directory, + instead of same directory as origin file. + Be aware that this command can introduce name collision issues, + if multiple files, from different directories, end up having the same name. + Collision resolution ensures first file with a given name will be present in `dir`, + while in combination with `-f`, the last file will be present instead. +* `--format=FORMAT`: + compress and decompress in other formats. If compiled with + support, zstd can compress to or decompress from other compression algorithm + formats. Possibly available options are `zstd`, `gzip`, `xz`, `lzma`, and `lz4`. + If no such format is provided, `zstd` is the default. +* `-h`/`-H`, `--help`: + display help/long help and exit +* `-V`, `--version`: + display version number and exit. + Advanced : `-vV` also displays supported formats. + `-vvV` also displays POSIX support. +* `-v`, `--verbose`: + verbose mode +* `--show-default-cparams`: + Shows the default compresssion parameters that will be used for a + particular src file. If the provided src file is not a regular file + (eg. named pipe), the cli will just output the default paramters. + That is, the parameters that are used when the src size is + unknown. +* `-q`, `--quiet`: + suppress warnings, interactivity, and notifications. + specify twice to suppress errors too. +* `--no-progress`: + do not display the progress bar, but keep all other messages. +* `-C`, `--[no-]check`: + add integrity check computed from uncompressed data (default: enabled) +* `--`: + All arguments after `--` are treated as files + +### Restricted usage of Environment Variables + +Using environment variables to set parameters has security implications. +Therefore, this avenue is intentionally restricted. +Only `ZSTD_CLEVEL` is supported currently, for setting compression level. +`ZSTD_CLEVEL` can be used to set the level between 1 and 19 (the "normal" range). +If the value of `ZSTD_CLEVEL` is not a valid integer, it will be ignored with a warning message. +`ZSTD_CLEVEL` just replaces the default compression level (`3`). +It can be overridden by corresponding command line arguments. + + +DICTIONARY BUILDER +------------------ +`zstd` offers _dictionary_ compression, +which greatly improves efficiency on small files and messages. +It's possible to train `zstd` with a set of samples, +the result of which is saved into a file called a `dictionary`. +Then during compression and decompression, reference the same dictionary, +using command `-D dictionaryFileName`. +Compression of small files similar to the sample set will be greatly improved. + +* `--train FILEs`: + Use FILEs as training set to create a dictionary. + The training set should contain a lot of small files (> 100), + and weight typically 100x the target dictionary size + (for example, 10 MB for a 100 KB dictionary). + + Supports multithreading if `zstd` is compiled with threading support. + Additional parameters can be specified with `--train-fastcover`. + The legacy dictionary builder can be accessed with `--train-legacy`. + The cover dictionary builder can be accessed with `--train-cover`. + Equivalent to `--train-fastcover=d=8,steps=4`. +* `-o file`: + Dictionary saved into `file` (default name: dictionary). +* `--maxdict=#`: + Limit dictionary to specified size (default: 112640). +* `-#`: + Use `#` compression level during training (optional). + Will generate statistics more tuned for selected compression level, + resulting in a _small_ compression ratio improvement for this level. +* `-B#`: + Split input files in blocks of size # (default: no split) +* `--dictID=#`: + A dictionary ID is a locally unique ID that a decoder can use to verify it is + using the right dictionary. + By default, zstd will create a 4-bytes random number ID. + It's possible to give a precise number instead. + Short numbers have an advantage : an ID < 256 will only need 1 byte in the + compressed frame header, and an ID < 65536 will only need 2 bytes. + This compares favorably to 4 bytes default. + However, it's up to the dictionary manager to not assign twice the same ID to + 2 different dictionaries. +* `--train-cover[=k#,d=#,steps=#,split=#,shrink[=#]]`: + Select parameters for the default dictionary builder algorithm named cover. + If _d_ is not specified, then it tries _d_ = 6 and _d_ = 8. + If _k_ is not specified, then it tries _steps_ values in the range [50, 2000]. + If _steps_ is not specified, then the default value of 40 is used. + If _split_ is not specified or split <= 0, then the default value of 100 is used. + Requires that _d_ <= _k_. + If _shrink_ flag is not used, then the default value for _shrinkDict_ of 0 is used. + If _shrink_ is not specified, then the default value for _shrinkDictMaxRegression_ of 1 is used. + + Selects segments of size _k_ with highest score to put in the dictionary. + The score of a segment is computed by the sum of the frequencies of all the + subsegments of size _d_. + Generally _d_ should be in the range [6, 8], occasionally up to 16, but the + algorithm will run faster with d <= _8_. + Good values for _k_ vary widely based on the input data, but a safe range is + [2 * _d_, 2000]. + If _split_ is 100, all input samples are used for both training and testing + to find optimal _d_ and _k_ to build dictionary. + Supports multithreading if `zstd` is compiled with threading support. + Having _shrink_ enabled takes a truncated dictionary of minimum size and doubles + in size until compression ratio of the truncated dictionary is at most + _shrinkDictMaxRegression%_ worse than the compression ratio of the largest dictionary. + + Examples: + + `zstd --train-cover FILEs` + + `zstd --train-cover=k=50,d=8 FILEs` + + `zstd --train-cover=d=8,steps=500 FILEs` + + `zstd --train-cover=k=50 FILEs` + + `zstd --train-cover=k=50,split=60 FILEs` + + `zstd --train-cover=shrink FILEs` + + `zstd --train-cover=shrink=2 FILEs` + +* `--train-fastcover[=k#,d=#,f=#,steps=#,split=#,accel=#]`: + Same as cover but with extra parameters _f_ and _accel_ and different default value of split + If _split_ is not specified, then it tries _split_ = 75. + If _f_ is not specified, then it tries _f_ = 20. + Requires that 0 < _f_ < 32. + If _accel_ is not specified, then it tries _accel_ = 1. + Requires that 0 < _accel_ <= 10. + Requires that _d_ = 6 or _d_ = 8. + + _f_ is log of size of array that keeps track of frequency of subsegments of size _d_. + The subsegment is hashed to an index in the range [0,2^_f_ - 1]. + It is possible that 2 different subsegments are hashed to the same index, and they are considered as the same subsegment when computing frequency. + Using a higher _f_ reduces collision but takes longer. + + Examples: + + `zstd --train-fastcover FILEs` + + `zstd --train-fastcover=d=8,f=15,accel=2 FILEs` + +* `--train-legacy[=selectivity=#]`: + Use legacy dictionary builder algorithm with the given dictionary + _selectivity_ (default: 9). + The smaller the _selectivity_ value, the denser the dictionary, + improving its efficiency but reducing its possible maximum size. + `--train-legacy=s=#` is also accepted. + + Examples: + + `zstd --train-legacy FILEs` + + `zstd --train-legacy=selectivity=8 FILEs` + + +BENCHMARK +--------- + +* `-b#`: + benchmark file(s) using compression level # +* `-e#`: + benchmark file(s) using multiple compression levels, from `-b#` to `-e#` (inclusive) +* `-i#`: + minimum evaluation time, in seconds (default: 3s), benchmark mode only +* `-B#`, `--block-size=#`: + cut file(s) into independent blocks of size # (default: no block) +* `--priority=rt`: + set process priority to real-time + +**Output Format:** CompressionLevel#Filename : IntputSize -> OutputSize (CompressionRatio), CompressionSpeed, DecompressionSpeed + +**Methodology:** For both compression and decompression speed, the entire input is compressed/decompressed in-memory to measure speed. A run lasts at least 1 sec, so when files are small, they are compressed/decompressed several times per run, in order to improve measurement accuracy. + +ADVANCED COMPRESSION OPTIONS +---------------------------- +### --zstd[=options]: +`zstd` provides 22 predefined compression levels. +The selected or default predefined compression level can be changed with +advanced compression options. +The _options_ are provided as a comma-separated list. +You may specify only the options you want to change and the rest will be +taken from the selected or default compression level. +The list of available _options_: + +- `strategy`=_strat_, `strat`=_strat_: + Specify a strategy used by a match finder. + + There are 9 strategies numbered from 1 to 9, from faster to stronger: + 1=ZSTD\_fast, 2=ZSTD\_dfast, 3=ZSTD\_greedy, + 4=ZSTD\_lazy, 5=ZSTD\_lazy2, 6=ZSTD\_btlazy2, + 7=ZSTD\_btopt, 8=ZSTD\_btultra, 9=ZSTD\_btultra2. + +- `windowLog`=_wlog_, `wlog`=_wlog_: + Specify the maximum number of bits for a match distance. + + The higher number of increases the chance to find a match which usually + improves compression ratio. + It also increases memory requirements for the compressor and decompressor. + The minimum _wlog_ is 10 (1 KiB) and the maximum is 30 (1 GiB) on 32-bit + platforms and 31 (2 GiB) on 64-bit platforms. + + Note: If `windowLog` is set to larger than 27, `--long=windowLog` or + `--memory=windowSize` needs to be passed to the decompressor. + +- `hashLog`=_hlog_, `hlog`=_hlog_: + Specify the maximum number of bits for a hash table. + + Bigger hash tables cause less collisions which usually makes compression + faster, but requires more memory during compression. + + The minimum _hlog_ is 6 (64 B) and the maximum is 30 (1 GiB). + +- `chainLog`=_clog_, `clog`=_clog_: + Specify the maximum number of bits for a hash chain or a binary tree. + + Higher numbers of bits increases the chance to find a match which usually + improves compression ratio. + It also slows down compression speed and increases memory requirements for + compression. + This option is ignored for the ZSTD_fast strategy. + + The minimum _clog_ is 6 (64 B) and the maximum is 29 (524 Mib) on 32-bit platforms + and 30 (1 Gib) on 64-bit platforms. + +- `searchLog`=_slog_, `slog`=_slog_: + Specify the maximum number of searches in a hash chain or a binary tree + using logarithmic scale. + + More searches increases the chance to find a match which usually increases + compression ratio but decreases compression speed. + + The minimum _slog_ is 1 and the maximum is 'windowLog' - 1. + +- `minMatch`=_mml_, `mml`=_mml_: + Specify the minimum searched length of a match in a hash table. + + Larger search lengths usually decrease compression ratio but improve + decompression speed. + + The minimum _mml_ is 3 and the maximum is 7. + +- `targetLength`=_tlen_, `tlen`=_tlen_: + The impact of this field vary depending on selected strategy. + + For ZSTD\_btopt, ZSTD\_btultra and ZSTD\_btultra2, it specifies + the minimum match length that causes match finder to stop searching. + A larger `targetLength` usually improves compression ratio + but decreases compression speed. +t + For ZSTD\_fast, it triggers ultra-fast mode when > 0. + The value represents the amount of data skipped between match sampling. + Impact is reversed : a larger `targetLength` increases compression speed + but decreases compression ratio. + + For all other strategies, this field has no impact. + + The minimum _tlen_ is 0 and the maximum is 128 Kib. + +- `overlapLog`=_ovlog_, `ovlog`=_ovlog_: + Determine `overlapSize`, amount of data reloaded from previous job. + This parameter is only available when multithreading is enabled. + Reloading more data improves compression ratio, but decreases speed. + + The minimum _ovlog_ is 0, and the maximum is 9. + 1 means "no overlap", hence completely independent jobs. + 9 means "full overlap", meaning up to `windowSize` is reloaded from previous job. + Reducing _ovlog_ by 1 reduces the reloaded amount by a factor 2. + For example, 8 means "windowSize/2", and 6 means "windowSize/8". + Value 0 is special and means "default" : _ovlog_ is automatically determined by `zstd`. + In which case, _ovlog_ will range from 6 to 9, depending on selected _strat_. + +- `ldmHashLog`=_lhlog_, `lhlog`=_lhlog_: + Specify the maximum size for a hash table used for long distance matching. + + This option is ignored unless long distance matching is enabled. + + Bigger hash tables usually improve compression ratio at the expense of more + memory during compression and a decrease in compression speed. + + The minimum _lhlog_ is 6 and the maximum is 30 (default: 20). + +- `ldmMinMatch`=_lmml_, `lmml`=_lmml_: + Specify the minimum searched length of a match for long distance matching. + + This option is ignored unless long distance matching is enabled. + + Larger/very small values usually decrease compression ratio. + + The minimum _lmml_ is 4 and the maximum is 4096 (default: 64). + +- `ldmBucketSizeLog`=_lblog_, `lblog`=_lblog_: + Specify the size of each bucket for the hash table used for long distance + matching. + + This option is ignored unless long distance matching is enabled. + + Larger bucket sizes improve collision resolution but decrease compression + speed. + + The minimum _lblog_ is 1 and the maximum is 8 (default: 3). + +- `ldmHashRateLog`=_lhrlog_, `lhrlog`=_lhrlog_: + Specify the frequency of inserting entries into the long distance matching + hash table. + + This option is ignored unless long distance matching is enabled. + + Larger values will improve compression speed. Deviating far from the + default value will likely result in a decrease in compression ratio. + + The default value is `wlog - lhlog`. + +### Example +The following parameters sets advanced compression options to something +similar to predefined level 19 for files bigger than 256 KB: + +`--zstd`=wlog=23,clog=23,hlog=22,slog=6,mml=3,tlen=48,strat=6 + +### -B#: +Select the size of each compression job. +This parameter is available only when multi-threading is enabled. +Default value is `4 * windowSize`, which means it varies depending on compression level. +`-B#` makes it possible to select a custom value. +Note that job size must respect a minimum value which is enforced transparently. +This minimum is either 1 MB, or `overlapSize`, whichever is largest. + +BUGS +---- +Report bugs at: https://github.com/facebook/zstd/issues + +AUTHOR +------ +Yann Collet |