diff options
Diffstat (limited to '')
-rw-r--r-- | doc/dev/developer_guide/running-tests-using-teuth.rst | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/doc/dev/developer_guide/running-tests-using-teuth.rst b/doc/dev/developer_guide/running-tests-using-teuth.rst new file mode 100644 index 000000000..492b7790e --- /dev/null +++ b/doc/dev/developer_guide/running-tests-using-teuth.rst @@ -0,0 +1,183 @@ +Running Integration Tests using Teuthology +========================================== + +Getting binaries +---------------- +To run integration tests using teuthology, you need to have Ceph binaries +built for your branch. Follow these steps to initiate the build process - + +#. Push the branch to `ceph-ci`_ repository. This triggers the process of + building the binaries. + +#. To confirm that the build process has been initiated, spot the branch name + at `Shaman`_. Little after the build process has been initiated, the single + entry with your branch name would multiply, each new entry for a different + combination of distro and flavour. + +#. Wait until the packages are built and uploaded, and the repository offering + them are created. This is marked by colouring the entries for the branch + name green. Preferably, wait until each entry is coloured green. Usually, + it takes around 2-3 hours depending on the availability of the machines. + +.. note:: Branch to be pushed on ceph-ci can be any branch, it shouldn't + necessarily be a PR branch. + +.. note:: In case you are pushing master or any other standard branch, check + `Shaman`_ beforehand since it already might have builds ready for it. + +Triggering Tests +---------------- +After building is complete, proceed to trigger tests - + +#. Log in to the teuthology machine:: + + ssh <username>@teuthology.front.sepia.ceph.com + + This would require Sepia lab access. To know how to request it, see: https://ceph.github.io/sepia/adding_users/ + +#. Next, get teuthology installed. Run the first set of commands in + `Running Your First Test`_ for that. After that, activate the virtual + environment in which teuthology is installed. + +#. Run the ``teuthology-suite`` command:: + + teuthology-suite -v -m smithi -c wip-devname-feature-x -s fs -p 110 --filter "cephfs-shell" + + Following are the options used in above command with their meanings - + -v verbose + -m machine name + -c branch name, the branch that was pushed on ceph-ci + -s test-suite name + -p higher the number, lower the priority of the job + --filter filter tests in given suite that needs to run, the arg to + filter should be the test you want to run + +.. note:: The priority number present in the command above is just a + placeholder. It might be highly inappropriate for the jobs you may want to + trigger. See `Testing Priority`_ section to pick a priority number. + +.. note:: Don't skip passing a priority number, the default value is 1000 + which way too high; the job probably might never run. + +#. Wait for the tests to run. ``teuthology-suite`` prints a link to the + `Pulpito`_ page created for the tests triggered. + +Other frequently used/useful options are ``-d`` (or ``--distro``), +``--distroversion``, ``--filter-out``, ``--timeout``, ``flavor``, ``-rerun``, +``-l`` (for limiting number of jobs) , ``-n`` (for how many times job would +run) and ``-e`` (for email notifications). Run ``teuthology-suite --help`` +to read description of these and every other options available. + +Testing QA changes (without re-building binaires) +------------------------------------------------- +While writing a PR you might need to test your PR repeatedly using teuthology. +If you are making non-QA changes, you need to follow the standard process of +triggering builds, waiting for it to finish and then triggering tests and +wait for the result. But if changes you made are purely changes in qa/, +you don't need rebuild the binaries. Instead you can test binaries built for +the ceph-ci branch and instruct ``teuthology-suite`` command to use a separate +branch for running tests. The separate branch can be passed to the command +by using ``--suite-repo`` and ``--suite-branch``. Pass the link to the GitHub +fork where your PR branch exists to the first option and pass the PR branch +name to the second option. + +For example, if you want to make changes in ``qa/`` after testing ``branch-x`` +(of which has ceph-ci branch is ``wip-username-branch-x``) by running +following command:: + + teuthology-suite -v -m smithi -c wip-username-branch-x -s fs -p 50 --filter cephfs-shell + +You can make the modifications locally, update the PR branch and then +trigger tests from your PR branch as follows:: + + teuthology-suite -v -m smithi -c wip-username-branch-x -s fs -p 50 --filter cephfs-shell --suite-repo https://github.com/username/ceph --suite-branch branch-x + +You can verify if the tests were run using this branch by looking at values +for the keys ``suite_branch``, ``suite_repo`` and ``suite_sha1`` in the job +config printed at the very beginning of the teuthology job. + +About Suites and Filters +------------------------ +See `Suites Inventory`_ for a list of suites of integration tests present +right now. Alternatively, each directory under ``qa/suites`` in Ceph +repository is an integration test suite, so looking within that directory +to decide an appropriate argument for ``-s`` also works. + +For picking an argument for ``--filter``, look within +``qa/suites/<suite-name>/<subsuite-name>/tasks`` to get keywords for filtering +tests. Each YAML file in there can trigger a bunch of tests; using the name of +the file, without the extension part of the file name, as an argument to the +``--filter`` will trigger those tests. For example, the sample command above +uses ``cephfs-shell`` since there's a file named ``cephfs-shell.yaml`` in +``qa/suites/fs/basic_functional/tasks/``. In case, the file name doesn't hint +what bunch of tests it would trigger, look at the contents of the file for +``modules`` attribute. For ``cephfs-shell.yaml`` the ``modules`` attribute +is ``tasks.cephfs.test_cephfs_shell`` which means it'll trigger all tests in +``qa/tasks/cephfs/test_cephfs_shell.py``. + +Killing Tests +------------- +Sometimes a teuthology job might not complete running for several minutes or +even hours after tests that were trigged have completed running and other +times wrong set of tests can be triggered is filter wasn't chosen carefully. +To save resource it's better to termniate such a job. Following is the command +to terminate a job:: + + teuthology-kill -r teuthology-2019-12-10_05:00:03-smoke-master-testing-basic-smithi + +Let's call the argument passed to ``-r`` as test ID. It can be found +easily in the link to the Pulpito page for the tests you triggered. For +example, for the above test ID, the link is - http://pulpito.front.sepia.ceph.com/teuthology-2019-12-10_05:00:03-smoke-master-testing-basic-smithi/ + +Re-running Tests +---------------- +Pass ``--rerun`` option, with test ID as an argument to it, to +``teuthology-suite`` command:: + + teuthology-suite -v -m smithi -c wip-rishabh-fs-test_cephfs_shell-fix -p 50 --rerun teuthology-2019-12-10_05:00:03-smoke-master-testing-basic-smithi + +The meaning of rest of the options is already covered in `Triggering Tests` +section. + +Teuthology Archives +------------------- +Once the tests have finished running, the log for the job can be obtained by +clicking on job ID at the Pulpito page for your tests. It's more convenient to +download the log and then view it rather than viewing it in an internet +browser since these logs can easily be upto size of 1 GB. What's much more +easier is to log in to the teuthology machine again +(``teuthology.front.sepia.ceph.com``), and access the following path:: + + /ceph/teuthology-archive/<test-id>/<job-id>/teuthology.log + +For example, for above test ID path is:: + + /ceph/teuthology-archive/teuthology-2019-12-10_05:00:03-smoke-master-testing-basic-smithi/4588482/teuthology.log + +This way the log remotely can be viewed remotely without having to wait too +much. + +Naming the ceph-ci branch +------------------------- +There are no hard conventions (except for the case of stable branch; see +next paragraph) for how the branch pushed on ceph-ci is named. But, to make +builds and tests easily identitifiable on Shaman and Pulpito respectively, +prepend it with your name. For example branch ``feature-x`` can be named +``wip-yourname-feature-x`` while pushing on ceph-ci. + +In case you are using one of the stable branches (e.g. nautilis, mimic, +etc.), include the name of that stable branch in your ceph-ci branch name. +For example, ``feature-x`` PR branch should be named as +``wip-feature-x-nautilus``. *This is not just a matter of convention but this, +more essentially, builds your branch in the correct environment.* + +Delete the branch from ceph-ci, once it's not required anymore. If you are +logged in at GitHub, all your branches on ceph-ci can be easily found here - +https://github.com/ceph/ceph-ci/branches. + +.. _ceph-ci: https://github.com/ceph/ceph-ci +.. _Pulpito: http://pulpito.front.sepia.ceph.com/ +.. _Running Your First Test: ../running-tests-locally/#running-your-first-test +.. _Shaman: https://shaman.ceph.com/builds/ceph/ +.. _Suites Inventory: ../tests-integration-tests/#suites-inventory +.. _Testing Priority: ../tests-integration-tests/#testing-priority |