summaryrefslogtreecommitdiffstats
path: root/doc/install/manual-deployment.rst
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--doc/install/manual-deployment.rst529
1 files changed, 529 insertions, 0 deletions
diff --git a/doc/install/manual-deployment.rst b/doc/install/manual-deployment.rst
new file mode 100644
index 000000000..9ad652634
--- /dev/null
+++ b/doc/install/manual-deployment.rst
@@ -0,0 +1,529 @@
+===================
+ Manual Deployment
+===================
+
+All Ceph clusters require at least one monitor, and at least as many OSDs as
+copies of an object stored on the cluster. Bootstrapping the initial monitor(s)
+is the first step in deploying a Ceph Storage Cluster. Monitor deployment also
+sets important criteria for the entire cluster, such as the number of replicas
+for pools, the number of placement groups per OSD, the heartbeat intervals,
+whether authentication is required, etc. Most of these values are set by
+default, so it's useful to know about them when setting up your cluster for
+production.
+
+We will set up a cluster with ``node1`` as the monitor node, and ``node2`` and
+``node3`` for OSD nodes.
+
+
+
+.. ditaa::
+
+ /------------------\ /----------------\
+ | Admin Node | | node1 |
+ | +-------->+ |
+ | | | cCCC |
+ \---------+--------/ \----------------/
+ |
+ | /----------------\
+ | | node2 |
+ +----------------->+ |
+ | | cCCC |
+ | \----------------/
+ |
+ | /----------------\
+ | | node3 |
+ +----------------->| |
+ | cCCC |
+ \----------------/
+
+
+Monitor Bootstrapping
+=====================
+
+Bootstrapping a monitor (a Ceph Storage Cluster, in theory) requires
+a number of things:
+
+- **Unique Identifier:** The ``fsid`` is a unique identifier for the cluster,
+ and stands for File System ID from the days when the Ceph Storage Cluster was
+ principally for the Ceph File System. Ceph now supports native interfaces,
+ block devices, and object storage gateway interfaces too, so ``fsid`` is a
+ bit of a misnomer.
+
+- **Cluster Name:** Ceph clusters have a cluster name, which is a simple string
+ without spaces. The default cluster name is ``ceph``, but you may specify
+ a different cluster name. Overriding the default cluster name is
+ especially useful when you are working with multiple clusters and you need to
+ clearly understand which cluster your are working with.
+
+ For example, when you run multiple clusters in a :ref:`multisite configuration <multisite>`,
+ the cluster name (e.g., ``us-west``, ``us-east``) identifies the cluster for
+ the current CLI session. **Note:** To identify the cluster name on the
+ command line interface, specify the Ceph configuration file with the
+ cluster name (e.g., ``ceph.conf``, ``us-west.conf``, ``us-east.conf``, etc.).
+ Also see CLI usage (``ceph --cluster {cluster-name}``).
+
+- **Monitor Name:** Each monitor instance within a cluster has a unique name.
+ In common practice, the Ceph Monitor name is the host name (we recommend one
+ Ceph Monitor per host, and no commingling of Ceph OSD Daemons with
+ Ceph Monitors). You may retrieve the short hostname with ``hostname -s``.
+
+- **Monitor Map:** Bootstrapping the initial monitor(s) requires you to
+ generate a monitor map. The monitor map requires the ``fsid``, the cluster
+ name (or uses the default), and at least one host name and its IP address.
+
+- **Monitor Keyring**: Monitors communicate with each other via a
+ secret key. You must generate a keyring with a monitor secret and provide
+ it when bootstrapping the initial monitor(s).
+
+- **Administrator Keyring**: To use the ``ceph`` CLI tools, you must have
+ a ``client.admin`` user. So you must generate the admin user and keyring,
+ and you must also add the ``client.admin`` user to the monitor keyring.
+
+The foregoing requirements do not imply the creation of a Ceph Configuration
+file. However, as a best practice, we recommend creating a Ceph configuration
+file and populating it with the ``fsid``, the ``mon initial members`` and the
+``mon host`` settings.
+
+You can get and set all of the monitor settings at runtime as well. However,
+a Ceph Configuration file may contain only those settings that override the
+default values. When you add settings to a Ceph configuration file, these
+settings override the default settings. Maintaining those settings in a
+Ceph configuration file makes it easier to maintain your cluster.
+
+The procedure is as follows:
+
+
+#. Log in to the initial monitor node(s)::
+
+ ssh {hostname}
+
+ For example::
+
+ ssh node1
+
+
+#. Ensure you have a directory for the Ceph configuration file. By default,
+ Ceph uses ``/etc/ceph``. When you install ``ceph``, the installer will
+ create the ``/etc/ceph`` directory automatically. ::
+
+ ls /etc/ceph
+
+
+#. Create a Ceph configuration file. By default, Ceph uses
+ ``ceph.conf``, where ``ceph`` reflects the cluster name. ::
+
+ sudo vim /etc/ceph/ceph.conf
+
+
+#. Generate a unique ID (i.e., ``fsid``) for your cluster. ::
+
+ uuidgen
+
+
+#. Add the unique ID to your Ceph configuration file. ::
+
+ fsid = {UUID}
+
+ For example::
+
+ fsid = a7f64266-0894-4f1e-a635-d0aeaca0e993
+
+
+#. Add the initial monitor(s) to your Ceph configuration file. ::
+
+ mon initial members = {hostname}[,{hostname}]
+
+ For example::
+
+ mon initial members = node1
+
+
+#. Add the IP address(es) of the initial monitor(s) to your Ceph configuration
+ file and save the file. ::
+
+ mon host = {ip-address}[,{ip-address}]
+
+ For example::
+
+ mon host = 192.168.0.1
+
+ **Note:** You may use IPv6 addresses instead of IPv4 addresses, but
+ you must set ``ms bind ipv6`` to ``true``. See `Network Configuration
+ Reference`_ for details about network configuration.
+
+#. Create a keyring for your cluster and generate a monitor secret key. ::
+
+ sudo ceph-authtool --create-keyring /tmp/ceph.mon.keyring --gen-key -n mon. --cap mon 'allow *'
+
+
+#. Generate an administrator keyring, generate a ``client.admin`` user and add
+ the user to the keyring. ::
+
+ sudo ceph-authtool --create-keyring /etc/ceph/ceph.client.admin.keyring --gen-key -n client.admin --cap mon 'allow *' --cap osd 'allow *' --cap mds 'allow *' --cap mgr 'allow *'
+
+#. Generate a bootstrap-osd keyring, generate a ``client.bootstrap-osd`` user and add
+ the user to the keyring. ::
+
+ sudo ceph-authtool --create-keyring /var/lib/ceph/bootstrap-osd/ceph.keyring --gen-key -n client.bootstrap-osd --cap mon 'profile bootstrap-osd' --cap mgr 'allow r'
+
+#. Add the generated keys to the ``ceph.mon.keyring``. ::
+
+ sudo ceph-authtool /tmp/ceph.mon.keyring --import-keyring /etc/ceph/ceph.client.admin.keyring
+ sudo ceph-authtool /tmp/ceph.mon.keyring --import-keyring /var/lib/ceph/bootstrap-osd/ceph.keyring
+
+#. Change the owner for ``ceph.mon.keyring``. ::
+
+ sudo chown ceph:ceph /tmp/ceph.mon.keyring
+
+#. Generate a monitor map using the hostname(s), host IP address(es) and the FSID.
+ Save it as ``/tmp/monmap``::
+
+ monmaptool --create --add {hostname} {ip-address} --fsid {uuid} /tmp/monmap
+
+ For example::
+
+ monmaptool --create --add node1 192.168.0.1 --fsid a7f64266-0894-4f1e-a635-d0aeaca0e993 /tmp/monmap
+
+
+#. Create a default data directory (or directories) on the monitor host(s). ::
+
+ sudo mkdir /var/lib/ceph/mon/{cluster-name}-{hostname}
+
+ For example::
+
+ sudo -u ceph mkdir /var/lib/ceph/mon/ceph-node1
+
+ See `Monitor Config Reference - Data`_ for details.
+
+#. Populate the monitor daemon(s) with the monitor map and keyring. ::
+
+ sudo -u ceph ceph-mon [--cluster {cluster-name}] --mkfs -i {hostname} --monmap /tmp/monmap --keyring /tmp/ceph.mon.keyring
+
+ For example::
+
+ sudo -u ceph ceph-mon --mkfs -i node1 --monmap /tmp/monmap --keyring /tmp/ceph.mon.keyring
+
+
+#. Consider settings for a Ceph configuration file. Common settings include
+ the following::
+
+ [global]
+ fsid = {cluster-id}
+ mon initial members = {hostname}[, {hostname}]
+ mon host = {ip-address}[, {ip-address}]
+ public network = {network}[, {network}]
+ cluster network = {network}[, {network}]
+ auth cluster required = cephx
+ auth service required = cephx
+ auth client required = cephx
+ osd journal size = {n}
+ osd pool default size = {n} # Write an object n times.
+ osd pool default min size = {n} # Allow writing n copies in a degraded state.
+ osd pool default pg num = {n}
+ osd pool default pgp num = {n}
+ osd crush chooseleaf type = {n}
+
+ In the foregoing example, the ``[global]`` section of the configuration might
+ look like this::
+
+ [global]
+ fsid = a7f64266-0894-4f1e-a635-d0aeaca0e993
+ mon initial members = node1
+ mon host = 192.168.0.1
+ public network = 192.168.0.0/24
+ auth cluster required = cephx
+ auth service required = cephx
+ auth client required = cephx
+ osd journal size = 1024
+ osd pool default size = 3
+ osd pool default min size = 2
+ osd pool default pg num = 333
+ osd pool default pgp num = 333
+ osd crush chooseleaf type = 1
+
+
+#. Start the monitor(s).
+
+ Start the service with systemd::
+
+ sudo systemctl start ceph-mon@node1
+
+#. Verify that the monitor is running. ::
+
+ sudo ceph -s
+
+ You should see output that the monitor you started is up and running, and
+ you should see a health error indicating that placement groups are stuck
+ inactive. It should look something like this::
+
+ cluster:
+ id: a7f64266-0894-4f1e-a635-d0aeaca0e993
+ health: HEALTH_OK
+
+ services:
+ mon: 1 daemons, quorum node1
+ mgr: node1(active)
+ osd: 0 osds: 0 up, 0 in
+
+ data:
+ pools: 0 pools, 0 pgs
+ objects: 0 objects, 0 bytes
+ usage: 0 kB used, 0 kB / 0 kB avail
+ pgs:
+
+
+ **Note:** Once you add OSDs and start them, the placement group health errors
+ should disappear. See `Adding OSDs`_ for details.
+
+Manager daemon configuration
+============================
+
+On each node where you run a ceph-mon daemon, you should also set up a ceph-mgr daemon.
+
+See :ref:`mgr-administrator-guide`
+
+Adding OSDs
+===========
+
+Once you have your initial monitor(s) running, you should add OSDs. Your cluster
+cannot reach an ``active + clean`` state until you have enough OSDs to handle the
+number of copies of an object (e.g., ``osd pool default size = 2`` requires at
+least two OSDs). After bootstrapping your monitor, your cluster has a default
+CRUSH map; however, the CRUSH map doesn't have any Ceph OSD Daemons mapped to
+a Ceph Node.
+
+
+Short Form
+----------
+
+Ceph provides the ``ceph-volume`` utility, which can prepare a logical volume, disk, or partition
+for use with Ceph. The ``ceph-volume`` utility creates the OSD ID by
+incrementing the index. Additionally, ``ceph-volume`` will add the new OSD to the
+CRUSH map under the host for you. Execute ``ceph-volume -h`` for CLI details.
+The ``ceph-volume`` utility automates the steps of the `Long Form`_ below. To
+create the first two OSDs with the short form procedure, execute the following
+on ``node2`` and ``node3``:
+
+bluestore
+^^^^^^^^^
+#. Create the OSD. ::
+
+ ssh {node-name}
+ sudo ceph-volume lvm create --data {data-path}
+
+ For example::
+
+ ssh node1
+ sudo ceph-volume lvm create --data /dev/hdd1
+
+Alternatively, the creation process can be split in two phases (prepare, and
+activate):
+
+#. Prepare the OSD. ::
+
+ ssh {node-name}
+ sudo ceph-volume lvm prepare --data {data-path} {data-path}
+
+ For example::
+
+ ssh node1
+ sudo ceph-volume lvm prepare --data /dev/hdd1
+
+ Once prepared, the ``ID`` and ``FSID`` of the prepared OSD are required for
+ activation. These can be obtained by listing OSDs in the current server::
+
+ sudo ceph-volume lvm list
+
+#. Activate the OSD::
+
+ sudo ceph-volume lvm activate {ID} {FSID}
+
+ For example::
+
+ sudo ceph-volume lvm activate 0 a7f64266-0894-4f1e-a635-d0aeaca0e993
+
+
+filestore
+^^^^^^^^^
+#. Create the OSD. ::
+
+ ssh {node-name}
+ sudo ceph-volume lvm create --filestore --data {data-path} --journal {journal-path}
+
+ For example::
+
+ ssh node1
+ sudo ceph-volume lvm create --filestore --data /dev/hdd1 --journal /dev/hdd2
+
+Alternatively, the creation process can be split in two phases (prepare, and
+activate):
+
+#. Prepare the OSD. ::
+
+ ssh {node-name}
+ sudo ceph-volume lvm prepare --filestore --data {data-path} --journal {journal-path}
+
+ For example::
+
+ ssh node1
+ sudo ceph-volume lvm prepare --filestore --data /dev/hdd1 --journal /dev/hdd2
+
+ Once prepared, the ``ID`` and ``FSID`` of the prepared OSD are required for
+ activation. These can be obtained by listing OSDs in the current server::
+
+ sudo ceph-volume lvm list
+
+#. Activate the OSD::
+
+ sudo ceph-volume lvm activate --filestore {ID} {FSID}
+
+ For example::
+
+ sudo ceph-volume lvm activate --filestore 0 a7f64266-0894-4f1e-a635-d0aeaca0e993
+
+
+Long Form
+---------
+
+Without the benefit of any helper utilities, create an OSD and add it to the
+cluster and CRUSH map with the following procedure. To create the first two
+OSDs with the long form procedure, execute the following steps for each OSD.
+
+.. note:: This procedure does not describe deployment on top of dm-crypt
+ making use of the dm-crypt 'lockbox'.
+
+#. Connect to the OSD host and become root. ::
+
+ ssh {node-name}
+ sudo bash
+
+#. Generate a UUID for the OSD. ::
+
+ UUID=$(uuidgen)
+
+#. Generate a cephx key for the OSD. ::
+
+ OSD_SECRET=$(ceph-authtool --gen-print-key)
+
+#. Create the OSD. Note that an OSD ID can be provided as an
+ additional argument to ``ceph osd new`` if you need to reuse a
+ previously-destroyed OSD id. We assume that the
+ ``client.bootstrap-osd`` key is present on the machine. You may
+ alternatively execute this command as ``client.admin`` on a
+ different host where that key is present.::
+
+ ID=$(echo "{\"cephx_secret\": \"$OSD_SECRET\"}" | \
+ ceph osd new $UUID -i - \
+ -n client.bootstrap-osd -k /var/lib/ceph/bootstrap-osd/ceph.keyring)
+
+ It is also possible to include a ``crush_device_class`` property in the JSON
+ to set an initial class other than the default (``ssd`` or ``hdd`` based on
+ the auto-detected device type).
+
+#. Create the default directory on your new OSD. ::
+
+ mkdir /var/lib/ceph/osd/ceph-$ID
+
+#. If the OSD is for a drive other than the OS drive, prepare it
+ for use with Ceph, and mount it to the directory you just created. ::
+
+ mkfs.xfs /dev/{DEV}
+ mount /dev/{DEV} /var/lib/ceph/osd/ceph-$ID
+
+#. Write the secret to the OSD keyring file. ::
+
+ ceph-authtool --create-keyring /var/lib/ceph/osd/ceph-$ID/keyring \
+ --name osd.$ID --add-key $OSD_SECRET
+
+#. Initialize the OSD data directory. ::
+
+ ceph-osd -i $ID --mkfs --osd-uuid $UUID
+
+#. Fix ownership. ::
+
+ chown -R ceph:ceph /var/lib/ceph/osd/ceph-$ID
+
+#. After you add an OSD to Ceph, the OSD is in your configuration. However,
+ it is not yet running. You must start
+ your new OSD before it can begin receiving data.
+
+ For modern systemd distributions::
+
+ systemctl enable ceph-osd@$ID
+ systemctl start ceph-osd@$ID
+
+ For example::
+
+ systemctl enable ceph-osd@12
+ systemctl start ceph-osd@12
+
+
+Adding MDS
+==========
+
+In the below instructions, ``{id}`` is an arbitrary name, such as the hostname of the machine.
+
+#. Create the mds data directory.::
+
+ mkdir -p /var/lib/ceph/mds/{cluster-name}-{id}
+
+#. Create a keyring.::
+
+ ceph-authtool --create-keyring /var/lib/ceph/mds/{cluster-name}-{id}/keyring --gen-key -n mds.{id}
+
+#. Import the keyring and set caps.::
+
+ ceph auth add mds.{id} osd "allow rwx" mds "allow *" mon "allow profile mds" -i /var/lib/ceph/mds/{cluster}-{id}/keyring
+
+#. Add to ceph.conf.::
+
+ [mds.{id}]
+ host = {id}
+
+#. Start the daemon the manual way.::
+
+ ceph-mds --cluster {cluster-name} -i {id} -m {mon-hostname}:{mon-port} [-f]
+
+#. Start the daemon the right way (using ceph.conf entry).::
+
+ service ceph start
+
+#. If starting the daemon fails with this error::
+
+ mds.-1.0 ERROR: failed to authenticate: (22) Invalid argument
+
+ Then make sure you do not have a keyring set in ceph.conf in the global section; move it to the client section; or add a keyring setting specific to this mds daemon. And verify that you see the same key in the mds data directory and ``ceph auth get mds.{id}`` output.
+
+#. Now you are ready to `create a Ceph file system`_.
+
+
+Summary
+=======
+
+Once you have your monitor and two OSDs up and running, you can watch the
+placement groups peer by executing the following::
+
+ ceph -w
+
+To view the tree, execute the following::
+
+ ceph osd tree
+
+You should see output that looks something like this::
+
+ # id weight type name up/down reweight
+ -1 2 root default
+ -2 2 host node1
+ 0 1 osd.0 up 1
+ -3 1 host node2
+ 1 1 osd.1 up 1
+
+To add (or remove) additional monitors, see `Add/Remove Monitors`_.
+To add (or remove) additional Ceph OSD Daemons, see `Add/Remove OSDs`_.
+
+
+.. _Add/Remove Monitors: ../../rados/operations/add-or-rm-mons
+.. _Add/Remove OSDs: ../../rados/operations/add-or-rm-osds
+.. _Network Configuration Reference: ../../rados/configuration/network-config-ref
+.. _Monitor Config Reference - Data: ../../rados/configuration/mon-config-ref#data
+.. _create a Ceph file system: ../../cephfs/createfs