diff options
Diffstat (limited to '')
| -rw-r--r-- | doc/install/manual-deployment.rst | 529 |
1 files changed, 529 insertions, 0 deletions
diff --git a/doc/install/manual-deployment.rst b/doc/install/manual-deployment.rst new file mode 100644 index 000000000..9ad652634 --- /dev/null +++ b/doc/install/manual-deployment.rst @@ -0,0 +1,529 @@ +=================== + Manual Deployment +=================== + +All Ceph clusters require at least one monitor, and at least as many OSDs as +copies of an object stored on the cluster. Bootstrapping the initial monitor(s) +is the first step in deploying a Ceph Storage Cluster. Monitor deployment also +sets important criteria for the entire cluster, such as the number of replicas +for pools, the number of placement groups per OSD, the heartbeat intervals, +whether authentication is required, etc. Most of these values are set by +default, so it's useful to know about them when setting up your cluster for +production. + +We will set up a cluster with ``node1`` as the monitor node, and ``node2`` and +``node3`` for OSD nodes. + + + +.. ditaa:: + + /------------------\ /----------------\ + | Admin Node | | node1 | + | +-------->+ | + | | | cCCC | + \---------+--------/ \----------------/ + | + | /----------------\ + | | node2 | + +----------------->+ | + | | cCCC | + | \----------------/ + | + | /----------------\ + | | node3 | + +----------------->| | + | cCCC | + \----------------/ + + +Monitor Bootstrapping +===================== + +Bootstrapping a monitor (a Ceph Storage Cluster, in theory) requires +a number of things: + +- **Unique Identifier:** The ``fsid`` is a unique identifier for the cluster, + and stands for File System ID from the days when the Ceph Storage Cluster was + principally for the Ceph File System. Ceph now supports native interfaces, + block devices, and object storage gateway interfaces too, so ``fsid`` is a + bit of a misnomer. + +- **Cluster Name:** Ceph clusters have a cluster name, which is a simple string + without spaces. The default cluster name is ``ceph``, but you may specify + a different cluster name. Overriding the default cluster name is + especially useful when you are working with multiple clusters and you need to + clearly understand which cluster your are working with. + + For example, when you run multiple clusters in a :ref:`multisite configuration <multisite>`, + the cluster name (e.g., ``us-west``, ``us-east``) identifies the cluster for + the current CLI session. **Note:** To identify the cluster name on the + command line interface, specify the Ceph configuration file with the + cluster name (e.g., ``ceph.conf``, ``us-west.conf``, ``us-east.conf``, etc.). + Also see CLI usage (``ceph --cluster {cluster-name}``). + +- **Monitor Name:** Each monitor instance within a cluster has a unique name. + In common practice, the Ceph Monitor name is the host name (we recommend one + Ceph Monitor per host, and no commingling of Ceph OSD Daemons with + Ceph Monitors). You may retrieve the short hostname with ``hostname -s``. + +- **Monitor Map:** Bootstrapping the initial monitor(s) requires you to + generate a monitor map. The monitor map requires the ``fsid``, the cluster + name (or uses the default), and at least one host name and its IP address. + +- **Monitor Keyring**: Monitors communicate with each other via a + secret key. You must generate a keyring with a monitor secret and provide + it when bootstrapping the initial monitor(s). + +- **Administrator Keyring**: To use the ``ceph`` CLI tools, you must have + a ``client.admin`` user. So you must generate the admin user and keyring, + and you must also add the ``client.admin`` user to the monitor keyring. + +The foregoing requirements do not imply the creation of a Ceph Configuration +file. However, as a best practice, we recommend creating a Ceph configuration +file and populating it with the ``fsid``, the ``mon initial members`` and the +``mon host`` settings. + +You can get and set all of the monitor settings at runtime as well. However, +a Ceph Configuration file may contain only those settings that override the +default values. When you add settings to a Ceph configuration file, these +settings override the default settings. Maintaining those settings in a +Ceph configuration file makes it easier to maintain your cluster. + +The procedure is as follows: + + +#. Log in to the initial monitor node(s):: + + ssh {hostname} + + For example:: + + ssh node1 + + +#. Ensure you have a directory for the Ceph configuration file. By default, + Ceph uses ``/etc/ceph``. When you install ``ceph``, the installer will + create the ``/etc/ceph`` directory automatically. :: + + ls /etc/ceph + + +#. Create a Ceph configuration file. By default, Ceph uses + ``ceph.conf``, where ``ceph`` reflects the cluster name. :: + + sudo vim /etc/ceph/ceph.conf + + +#. Generate a unique ID (i.e., ``fsid``) for your cluster. :: + + uuidgen + + +#. Add the unique ID to your Ceph configuration file. :: + + fsid = {UUID} + + For example:: + + fsid = a7f64266-0894-4f1e-a635-d0aeaca0e993 + + +#. Add the initial monitor(s) to your Ceph configuration file. :: + + mon initial members = {hostname}[,{hostname}] + + For example:: + + mon initial members = node1 + + +#. Add the IP address(es) of the initial monitor(s) to your Ceph configuration + file and save the file. :: + + mon host = {ip-address}[,{ip-address}] + + For example:: + + mon host = 192.168.0.1 + + **Note:** You may use IPv6 addresses instead of IPv4 addresses, but + you must set ``ms bind ipv6`` to ``true``. See `Network Configuration + Reference`_ for details about network configuration. + +#. Create a keyring for your cluster and generate a monitor secret key. :: + + sudo ceph-authtool --create-keyring /tmp/ceph.mon.keyring --gen-key -n mon. --cap mon 'allow *' + + +#. Generate an administrator keyring, generate a ``client.admin`` user and add + the user to the keyring. :: + + sudo ceph-authtool --create-keyring /etc/ceph/ceph.client.admin.keyring --gen-key -n client.admin --cap mon 'allow *' --cap osd 'allow *' --cap mds 'allow *' --cap mgr 'allow *' + +#. Generate a bootstrap-osd keyring, generate a ``client.bootstrap-osd`` user and add + the user to the keyring. :: + + sudo ceph-authtool --create-keyring /var/lib/ceph/bootstrap-osd/ceph.keyring --gen-key -n client.bootstrap-osd --cap mon 'profile bootstrap-osd' --cap mgr 'allow r' + +#. Add the generated keys to the ``ceph.mon.keyring``. :: + + sudo ceph-authtool /tmp/ceph.mon.keyring --import-keyring /etc/ceph/ceph.client.admin.keyring + sudo ceph-authtool /tmp/ceph.mon.keyring --import-keyring /var/lib/ceph/bootstrap-osd/ceph.keyring + +#. Change the owner for ``ceph.mon.keyring``. :: + + sudo chown ceph:ceph /tmp/ceph.mon.keyring + +#. Generate a monitor map using the hostname(s), host IP address(es) and the FSID. + Save it as ``/tmp/monmap``:: + + monmaptool --create --add {hostname} {ip-address} --fsid {uuid} /tmp/monmap + + For example:: + + monmaptool --create --add node1 192.168.0.1 --fsid a7f64266-0894-4f1e-a635-d0aeaca0e993 /tmp/monmap + + +#. Create a default data directory (or directories) on the monitor host(s). :: + + sudo mkdir /var/lib/ceph/mon/{cluster-name}-{hostname} + + For example:: + + sudo -u ceph mkdir /var/lib/ceph/mon/ceph-node1 + + See `Monitor Config Reference - Data`_ for details. + +#. Populate the monitor daemon(s) with the monitor map and keyring. :: + + sudo -u ceph ceph-mon [--cluster {cluster-name}] --mkfs -i {hostname} --monmap /tmp/monmap --keyring /tmp/ceph.mon.keyring + + For example:: + + sudo -u ceph ceph-mon --mkfs -i node1 --monmap /tmp/monmap --keyring /tmp/ceph.mon.keyring + + +#. Consider settings for a Ceph configuration file. Common settings include + the following:: + + [global] + fsid = {cluster-id} + mon initial members = {hostname}[, {hostname}] + mon host = {ip-address}[, {ip-address}] + public network = {network}[, {network}] + cluster network = {network}[, {network}] + auth cluster required = cephx + auth service required = cephx + auth client required = cephx + osd journal size = {n} + osd pool default size = {n} # Write an object n times. + osd pool default min size = {n} # Allow writing n copies in a degraded state. + osd pool default pg num = {n} + osd pool default pgp num = {n} + osd crush chooseleaf type = {n} + + In the foregoing example, the ``[global]`` section of the configuration might + look like this:: + + [global] + fsid = a7f64266-0894-4f1e-a635-d0aeaca0e993 + mon initial members = node1 + mon host = 192.168.0.1 + public network = 192.168.0.0/24 + auth cluster required = cephx + auth service required = cephx + auth client required = cephx + osd journal size = 1024 + osd pool default size = 3 + osd pool default min size = 2 + osd pool default pg num = 333 + osd pool default pgp num = 333 + osd crush chooseleaf type = 1 + + +#. Start the monitor(s). + + Start the service with systemd:: + + sudo systemctl start ceph-mon@node1 + +#. Verify that the monitor is running. :: + + sudo ceph -s + + You should see output that the monitor you started is up and running, and + you should see a health error indicating that placement groups are stuck + inactive. It should look something like this:: + + cluster: + id: a7f64266-0894-4f1e-a635-d0aeaca0e993 + health: HEALTH_OK + + services: + mon: 1 daemons, quorum node1 + mgr: node1(active) + osd: 0 osds: 0 up, 0 in + + data: + pools: 0 pools, 0 pgs + objects: 0 objects, 0 bytes + usage: 0 kB used, 0 kB / 0 kB avail + pgs: + + + **Note:** Once you add OSDs and start them, the placement group health errors + should disappear. See `Adding OSDs`_ for details. + +Manager daemon configuration +============================ + +On each node where you run a ceph-mon daemon, you should also set up a ceph-mgr daemon. + +See :ref:`mgr-administrator-guide` + +Adding OSDs +=========== + +Once you have your initial monitor(s) running, you should add OSDs. Your cluster +cannot reach an ``active + clean`` state until you have enough OSDs to handle the +number of copies of an object (e.g., ``osd pool default size = 2`` requires at +least two OSDs). After bootstrapping your monitor, your cluster has a default +CRUSH map; however, the CRUSH map doesn't have any Ceph OSD Daemons mapped to +a Ceph Node. + + +Short Form +---------- + +Ceph provides the ``ceph-volume`` utility, which can prepare a logical volume, disk, or partition +for use with Ceph. The ``ceph-volume`` utility creates the OSD ID by +incrementing the index. Additionally, ``ceph-volume`` will add the new OSD to the +CRUSH map under the host for you. Execute ``ceph-volume -h`` for CLI details. +The ``ceph-volume`` utility automates the steps of the `Long Form`_ below. To +create the first two OSDs with the short form procedure, execute the following +on ``node2`` and ``node3``: + +bluestore +^^^^^^^^^ +#. Create the OSD. :: + + ssh {node-name} + sudo ceph-volume lvm create --data {data-path} + + For example:: + + ssh node1 + sudo ceph-volume lvm create --data /dev/hdd1 + +Alternatively, the creation process can be split in two phases (prepare, and +activate): + +#. Prepare the OSD. :: + + ssh {node-name} + sudo ceph-volume lvm prepare --data {data-path} {data-path} + + For example:: + + ssh node1 + sudo ceph-volume lvm prepare --data /dev/hdd1 + + Once prepared, the ``ID`` and ``FSID`` of the prepared OSD are required for + activation. These can be obtained by listing OSDs in the current server:: + + sudo ceph-volume lvm list + +#. Activate the OSD:: + + sudo ceph-volume lvm activate {ID} {FSID} + + For example:: + + sudo ceph-volume lvm activate 0 a7f64266-0894-4f1e-a635-d0aeaca0e993 + + +filestore +^^^^^^^^^ +#. Create the OSD. :: + + ssh {node-name} + sudo ceph-volume lvm create --filestore --data {data-path} --journal {journal-path} + + For example:: + + ssh node1 + sudo ceph-volume lvm create --filestore --data /dev/hdd1 --journal /dev/hdd2 + +Alternatively, the creation process can be split in two phases (prepare, and +activate): + +#. Prepare the OSD. :: + + ssh {node-name} + sudo ceph-volume lvm prepare --filestore --data {data-path} --journal {journal-path} + + For example:: + + ssh node1 + sudo ceph-volume lvm prepare --filestore --data /dev/hdd1 --journal /dev/hdd2 + + Once prepared, the ``ID`` and ``FSID`` of the prepared OSD are required for + activation. These can be obtained by listing OSDs in the current server:: + + sudo ceph-volume lvm list + +#. Activate the OSD:: + + sudo ceph-volume lvm activate --filestore {ID} {FSID} + + For example:: + + sudo ceph-volume lvm activate --filestore 0 a7f64266-0894-4f1e-a635-d0aeaca0e993 + + +Long Form +--------- + +Without the benefit of any helper utilities, create an OSD and add it to the +cluster and CRUSH map with the following procedure. To create the first two +OSDs with the long form procedure, execute the following steps for each OSD. + +.. note:: This procedure does not describe deployment on top of dm-crypt + making use of the dm-crypt 'lockbox'. + +#. Connect to the OSD host and become root. :: + + ssh {node-name} + sudo bash + +#. Generate a UUID for the OSD. :: + + UUID=$(uuidgen) + +#. Generate a cephx key for the OSD. :: + + OSD_SECRET=$(ceph-authtool --gen-print-key) + +#. Create the OSD. Note that an OSD ID can be provided as an + additional argument to ``ceph osd new`` if you need to reuse a + previously-destroyed OSD id. We assume that the + ``client.bootstrap-osd`` key is present on the machine. You may + alternatively execute this command as ``client.admin`` on a + different host where that key is present.:: + + ID=$(echo "{\"cephx_secret\": \"$OSD_SECRET\"}" | \ + ceph osd new $UUID -i - \ + -n client.bootstrap-osd -k /var/lib/ceph/bootstrap-osd/ceph.keyring) + + It is also possible to include a ``crush_device_class`` property in the JSON + to set an initial class other than the default (``ssd`` or ``hdd`` based on + the auto-detected device type). + +#. Create the default directory on your new OSD. :: + + mkdir /var/lib/ceph/osd/ceph-$ID + +#. If the OSD is for a drive other than the OS drive, prepare it + for use with Ceph, and mount it to the directory you just created. :: + + mkfs.xfs /dev/{DEV} + mount /dev/{DEV} /var/lib/ceph/osd/ceph-$ID + +#. Write the secret to the OSD keyring file. :: + + ceph-authtool --create-keyring /var/lib/ceph/osd/ceph-$ID/keyring \ + --name osd.$ID --add-key $OSD_SECRET + +#. Initialize the OSD data directory. :: + + ceph-osd -i $ID --mkfs --osd-uuid $UUID + +#. Fix ownership. :: + + chown -R ceph:ceph /var/lib/ceph/osd/ceph-$ID + +#. After you add an OSD to Ceph, the OSD is in your configuration. However, + it is not yet running. You must start + your new OSD before it can begin receiving data. + + For modern systemd distributions:: + + systemctl enable ceph-osd@$ID + systemctl start ceph-osd@$ID + + For example:: + + systemctl enable ceph-osd@12 + systemctl start ceph-osd@12 + + +Adding MDS +========== + +In the below instructions, ``{id}`` is an arbitrary name, such as the hostname of the machine. + +#. Create the mds data directory.:: + + mkdir -p /var/lib/ceph/mds/{cluster-name}-{id} + +#. Create a keyring.:: + + ceph-authtool --create-keyring /var/lib/ceph/mds/{cluster-name}-{id}/keyring --gen-key -n mds.{id} + +#. Import the keyring and set caps.:: + + ceph auth add mds.{id} osd "allow rwx" mds "allow *" mon "allow profile mds" -i /var/lib/ceph/mds/{cluster}-{id}/keyring + +#. Add to ceph.conf.:: + + [mds.{id}] + host = {id} + +#. Start the daemon the manual way.:: + + ceph-mds --cluster {cluster-name} -i {id} -m {mon-hostname}:{mon-port} [-f] + +#. Start the daemon the right way (using ceph.conf entry).:: + + service ceph start + +#. If starting the daemon fails with this error:: + + mds.-1.0 ERROR: failed to authenticate: (22) Invalid argument + + Then make sure you do not have a keyring set in ceph.conf in the global section; move it to the client section; or add a keyring setting specific to this mds daemon. And verify that you see the same key in the mds data directory and ``ceph auth get mds.{id}`` output. + +#. Now you are ready to `create a Ceph file system`_. + + +Summary +======= + +Once you have your monitor and two OSDs up and running, you can watch the +placement groups peer by executing the following:: + + ceph -w + +To view the tree, execute the following:: + + ceph osd tree + +You should see output that looks something like this:: + + # id weight type name up/down reweight + -1 2 root default + -2 2 host node1 + 0 1 osd.0 up 1 + -3 1 host node2 + 1 1 osd.1 up 1 + +To add (or remove) additional monitors, see `Add/Remove Monitors`_. +To add (or remove) additional Ceph OSD Daemons, see `Add/Remove OSDs`_. + + +.. _Add/Remove Monitors: ../../rados/operations/add-or-rm-mons +.. _Add/Remove OSDs: ../../rados/operations/add-or-rm-osds +.. _Network Configuration Reference: ../../rados/configuration/network-config-ref +.. _Monitor Config Reference - Data: ../../rados/configuration/mon-config-ref#data +.. _create a Ceph file system: ../../cephfs/createfs |