summaryrefslogtreecommitdiffstats
path: root/doc/mgr/restful.rst
diff options
context:
space:
mode:
Diffstat (limited to 'doc/mgr/restful.rst')
-rw-r--r--doc/mgr/restful.rst189
1 files changed, 189 insertions, 0 deletions
diff --git a/doc/mgr/restful.rst b/doc/mgr/restful.rst
new file mode 100644
index 000000000..d684399fc
--- /dev/null
+++ b/doc/mgr/restful.rst
@@ -0,0 +1,189 @@
+Restful Module
+==============
+
+RESTful module offers the REST API access to the status of the cluster
+over an SSL-secured connection.
+
+Enabling
+--------
+
+The *restful* module is enabled with::
+
+ ceph mgr module enable restful
+
+You will also need to configure an SSL certificate below before the
+API endpoint is available. By default the module will accept HTTPS
+requests on port ``8003`` on all IPv4 and IPv6 addresses on the host.
+
+Securing
+--------
+
+All connections to *restful* are secured with SSL. You can generate a
+self-signed certificate with the command::
+
+ ceph restful create-self-signed-cert
+
+Note that with a self-signed certificate most clients will need a flag
+to allow a connection and/or suppress warning messages. For example,
+if the ``ceph-mgr`` daemon is on the same host,::
+
+ curl -k https://localhost:8003/
+
+To properly secure a deployment, a certificate that is signed by the
+organization's certificate authority should be used. For example, a key pair
+can be generated with a command similar to::
+
+ openssl req -new -nodes -x509 \
+ -subj "/O=IT/CN=ceph-mgr-restful" \
+ -days 3650 -keyout restful.key -out restful.crt -extensions v3_ca
+
+The ``restful.crt`` should then be signed by your organization's CA
+(certificate authority). Once that is done, you can set it with::
+
+ ceph config-key set mgr/restful/$name/crt -i restful.crt
+ ceph config-key set mgr/restful/$name/key -i restful.key
+
+where ``$name`` is the name of the ``ceph-mgr`` instance (usually the
+hostname). If all manager instances are to share the same certificate,
+you can leave off the ``$name`` portion::
+
+ ceph config-key set mgr/restful/crt -i restful.crt
+ ceph config-key set mgr/restful/key -i restful.key
+
+
+Configuring IP and port
+-----------------------
+
+Like any other RESTful API endpoint, *restful* binds to an IP and
+port. By default, the currently active ``ceph-mgr`` daemon will bind
+to port 8003 and any available IPv4 or IPv6 address on the host.
+
+Since each ``ceph-mgr`` hosts its own instance of *restful*, it may
+also be necessary to configure them separately. The IP and port
+can be changed via the configuration key facility::
+
+ ceph config set mgr mgr/restful/$name/server_addr $IP
+ ceph config set mgr mgr/restful/$name/server_port $PORT
+
+where ``$name`` is the ID of the ceph-mgr daemon (usually the hostname).
+
+These settings can also be configured cluster-wide and not manager
+specific. For example,::
+
+ ceph config set mgr mgr/restful/server_addr $IP
+ ceph config set mgr mgr/restful/server_port $PORT
+
+If the port is not configured, *restful* will bind to port ``8003``.
+If the address it not configured, the *restful* will bind to ``::``,
+which corresponds to all available IPv4 and IPv6 addresses.
+
+.. _creating-an-api-user:
+
+Creating an API User
+-----------------------
+
+To create an API user, please run the following command::
+
+ ceph restful create-key <username>
+
+Replace ``<username>`` with the desired name of the user. For example, to create a user named
+``api``::
+
+ $ ceph restful create-key api
+ 52dffd92-a103-4a10-bfce-5b60f48f764e
+
+The UUID generated from ``ceph restful create-key api`` acts as the key for the user.
+
+To list all of your API keys, please run the following command::
+
+ ceph restful list-keys
+
+The ``ceph restful list-keys`` command will output in JSON::
+
+ {
+ "api": "52dffd92-a103-4a10-bfce-5b60f48f764e"
+ }
+
+You can use ``curl`` in order to test your user with the API. Here is an example::
+
+ curl -k https://api:52dffd92-a103-4a10-bfce-5b60f48f764e@<ceph-mgr>:<port>/server
+
+In the case above, we are using ``GET`` to fetch information from the ``server`` endpoint.
+
+Load balancer
+-------------
+
+Please note that *restful* will *only* start on the manager which
+is active at that moment. Query the Ceph cluster status to see which
+manager is active (e.g., ``ceph mgr dump``). In order to make the
+API available via a consistent URL regardless of which manager
+daemon is currently active, you may want to set up a load balancer
+front-end to direct traffic to whichever manager endpoint is
+available.
+
+Available methods
+-----------------
+
+You can navigate to the ``/doc`` endpoint for full list of available
+endpoints and HTTP methods implemented for each endpoint.
+
+For example, if you want to use the PATCH method of the ``/osd/<id>``
+endpoint to set the state ``up`` of the OSD id ``1``, you can use the
+following curl command::
+
+ echo -En '{"up": true}' | curl --request PATCH --data @- --silent --insecure --user <user> 'https://<ceph-mgr>:<port>/osd/1'
+
+or you can use python to do so::
+
+ $ python
+ >> import requests
+ >> result = requests.patch(
+ 'https://<ceph-mgr>:<port>/osd/1',
+ json={"up": True},
+ auth=("<user>", "<password>")
+ )
+ >> print result.json()
+
+Some of the other endpoints implemented in the *restful* module include
+
+* ``/config/cluster``: **GET**
+* ``/config/osd``: **GET**, **PATCH**
+* ``/crush/rule``: **GET**
+* ``/mon``: **GET**
+* ``/osd``: **GET**
+* ``/pool``: **GET**, **POST**
+* ``/pool/<arg>``: **DELETE**, **GET**, **PATCH**
+* ``/request``: **DELETE**, **GET**, **POST**
+* ``/request/<arg>``: **DELETE**, **GET**
+* ``/server``: **GET**
+
+The ``/request`` endpoint
+-------------------------
+
+You can use the ``/request`` endpoint to poll the state of a request
+you scheduled with any **DELETE**, **POST** or **PATCH** method. These
+methods are by default asynchronous since it may take longer for them
+to finish execution. You can modify this behaviour by appending
+``?wait=1`` to the request url. The returned request will then always
+be completed.
+
+The **POST** method of the ``/request`` method provides a passthrough
+for the ceph mon commands as defined in ``src/mon/MonCommands.h``.
+Let's consider the following command::
+
+ COMMAND("osd ls " \
+ "name=epoch,type=CephInt,range=0,req=false", \
+ "show all OSD ids", "osd", "r", "cli,rest")
+
+The **prefix** is **osd ls**. The optional argument's name is **epoch**
+and it is of type ``CephInt``, i.e. ``integer``. This means that you
+need to do the following **POST** request to schedule the command::
+
+ $ python
+ >> import requests
+ >> result = requests.post(
+ 'https://<ceph-mgr>:<port>/request',
+ json={'prefix': 'osd ls', 'epoch': 0},
+ auth=("<user>", "<password>")
+ )
+ >> print result.json()