summaryrefslogtreecommitdiffstats
path: root/doc/rados/operations/control.rst
diff options
context:
space:
mode:
Diffstat (limited to 'doc/rados/operations/control.rst')
-rw-r--r--doc/rados/operations/control.rst601
1 files changed, 601 insertions, 0 deletions
diff --git a/doc/rados/operations/control.rst b/doc/rados/operations/control.rst
new file mode 100644
index 000000000..d7a512618
--- /dev/null
+++ b/doc/rados/operations/control.rst
@@ -0,0 +1,601 @@
+.. index:: control, commands
+
+==================
+ Control Commands
+==================
+
+
+Monitor Commands
+================
+
+Monitor commands are issued using the ``ceph`` utility:
+
+.. prompt:: bash $
+
+ ceph [-m monhost] {command}
+
+The command is usually (though not always) of the form:
+
+.. prompt:: bash $
+
+ ceph {subsystem} {command}
+
+
+System Commands
+===============
+
+Execute the following to display the current cluster status. :
+
+.. prompt:: bash $
+
+ ceph -s
+ ceph status
+
+Execute the following to display a running summary of cluster status
+and major events. :
+
+.. prompt:: bash $
+
+ ceph -w
+
+Execute the following to show the monitor quorum, including which monitors are
+participating and which one is the leader. :
+
+.. prompt:: bash $
+
+ ceph mon stat
+ ceph quorum_status
+
+Execute the following to query the status of a single monitor, including whether
+or not it is in the quorum. :
+
+.. prompt:: bash $
+
+ ceph tell mon.[id] mon_status
+
+where the value of ``[id]`` can be determined, e.g., from ``ceph -s``.
+
+
+Authentication Subsystem
+========================
+
+To add a keyring for an OSD, execute the following:
+
+.. prompt:: bash $
+
+ ceph auth add {osd} {--in-file|-i} {path-to-osd-keyring}
+
+To list the cluster's keys and their capabilities, execute the following:
+
+.. prompt:: bash $
+
+ ceph auth ls
+
+
+Placement Group Subsystem
+=========================
+
+To display the statistics for all placement groups (PGs), execute the following:
+
+.. prompt:: bash $
+
+ ceph pg dump [--format {format}]
+
+The valid formats are ``plain`` (default), ``json`` ``json-pretty``, ``xml``, and ``xml-pretty``.
+When implementing monitoring and other tools, it is best to use ``json`` format.
+JSON parsing is more deterministic than the human-oriented ``plain``, and the layout is much
+less variable from release to release. The ``jq`` utility can be invaluable when extracting
+data from JSON output.
+
+To display the statistics for all placement groups stuck in a specified state,
+execute the following:
+
+.. prompt:: bash $
+
+ ceph pg dump_stuck inactive|unclean|stale|undersized|degraded [--format {format}] [-t|--threshold {seconds}]
+
+
+``--format`` may be ``plain`` (default), ``json``, ``json-pretty``, ``xml``, or ``xml-pretty``.
+
+``--threshold`` defines how many seconds "stuck" is (default: 300)
+
+**Inactive** Placement groups cannot process reads or writes because they are waiting for an OSD
+with the most up-to-date data to come back.
+
+**Unclean** Placement groups contain objects that are not replicated the desired number
+of times. They should be recovering.
+
+**Stale** Placement groups are in an unknown state - the OSDs that host them have not
+reported to the monitor cluster in a while (configured by
+``mon_osd_report_timeout``).
+
+Delete "lost" objects or revert them to their prior state, either a previous version
+or delete them if they were just created. :
+
+.. prompt:: bash $
+
+ ceph pg {pgid} mark_unfound_lost revert|delete
+
+
+.. _osd-subsystem:
+
+OSD Subsystem
+=============
+
+Query OSD subsystem status. :
+
+.. prompt:: bash $
+
+ ceph osd stat
+
+Write a copy of the most recent OSD map to a file. See
+:ref:`osdmaptool <osdmaptool>`. :
+
+.. prompt:: bash $
+
+ ceph osd getmap -o file
+
+Write a copy of the crush map from the most recent OSD map to
+file. :
+
+.. prompt:: bash $
+
+ ceph osd getcrushmap -o file
+
+The foregoing is functionally equivalent to :
+
+.. prompt:: bash $
+
+ ceph osd getmap -o /tmp/osdmap
+ osdmaptool /tmp/osdmap --export-crush file
+
+Dump the OSD map. Valid formats for ``-f`` are ``plain``, ``json``, ``json-pretty``,
+``xml``, and ``xml-pretty``. If no ``--format`` option is given, the OSD map is
+dumped as plain text. As above, JSON format is best for tools, scripting, and other automation. :
+
+.. prompt:: bash $
+
+ ceph osd dump [--format {format}]
+
+Dump the OSD map as a tree with one line per OSD containing weight
+and state. :
+
+.. prompt:: bash $
+
+ ceph osd tree [--format {format}]
+
+Find out where a specific object is or would be stored in the system:
+
+.. prompt:: bash $
+
+ ceph osd map <pool-name> <object-name>
+
+Add or move a new item (OSD) with the given id/name/weight at the specified
+location. :
+
+.. prompt:: bash $
+
+ ceph osd crush set {id} {weight} [{loc1} [{loc2} ...]]
+
+Remove an existing item (OSD) from the CRUSH map. :
+
+.. prompt:: bash $
+
+ ceph osd crush remove {name}
+
+Remove an existing bucket from the CRUSH map. :
+
+.. prompt:: bash $
+
+ ceph osd crush remove {bucket-name}
+
+Move an existing bucket from one position in the hierarchy to another. :
+
+.. prompt:: bash $
+
+ ceph osd crush move {id} {loc1} [{loc2} ...]
+
+Set the weight of the item given by ``{name}`` to ``{weight}``. :
+
+.. prompt:: bash $
+
+ ceph osd crush reweight {name} {weight}
+
+Mark an OSD as ``lost``. This may result in permanent data loss. Use with caution. :
+
+.. prompt:: bash $
+
+ ceph osd lost {id} [--yes-i-really-mean-it]
+
+Create a new OSD. If no UUID is given, it will be set automatically when the OSD
+starts up. :
+
+.. prompt:: bash $
+
+ ceph osd create [{uuid}]
+
+Remove the given OSD(s). :
+
+.. prompt:: bash $
+
+ ceph osd rm [{id}...]
+
+Query the current ``max_osd`` parameter in the OSD map. :
+
+.. prompt:: bash $
+
+ ceph osd getmaxosd
+
+Import the given crush map. :
+
+.. prompt:: bash $
+
+ ceph osd setcrushmap -i file
+
+Set the ``max_osd`` parameter in the OSD map. This defaults to 10000 now so
+most admins will never need to adjust this. :
+
+.. prompt:: bash $
+
+ ceph osd setmaxosd
+
+Mark OSD ``{osd-num}`` down. :
+
+.. prompt:: bash $
+
+ ceph osd down {osd-num}
+
+Mark OSD ``{osd-num}`` out of the distribution (i.e. allocated no data). :
+
+.. prompt:: bash $
+
+ ceph osd out {osd-num}
+
+Mark ``{osd-num}`` in the distribution (i.e. allocated data). :
+
+.. prompt:: bash $
+
+ ceph osd in {osd-num}
+
+Set or clear the pause flags in the OSD map. If set, no IO requests
+will be sent to any OSD. Clearing the flags via unpause results in
+resending pending requests. :
+
+.. prompt:: bash $
+
+ ceph osd pause
+ ceph osd unpause
+
+Set the override weight (reweight) of ``{osd-num}`` to ``{weight}``. Two OSDs with the
+same weight will receive roughly the same number of I/O requests and
+store approximately the same amount of data. ``ceph osd reweight``
+sets an override weight on the OSD. This value is in the range 0 to 1,
+and forces CRUSH to re-place (1-weight) of the data that would
+otherwise live on this drive. It does not change weights assigned
+to the buckets above the OSD in the crush map, and is a corrective
+measure in case the normal CRUSH distribution is not working out quite
+right. For instance, if one of your OSDs is at 90% and the others are
+at 50%, you could reduce this weight to compensate. :
+
+.. prompt:: bash $
+
+ ceph osd reweight {osd-num} {weight}
+
+Balance OSD fullness by reducing the override weight of OSDs which are
+overly utilized. Note that these override aka ``reweight`` values
+default to 1.00000 and are relative only to each other; they not absolute.
+It is crucial to distinguish them from CRUSH weights, which reflect the
+absolute capacity of a bucket in TiB. By default this command adjusts
+override weight on OSDs which have + or - 20% of the average utilization,
+but if you include a ``threshold`` that percentage will be used instead. :
+
+.. prompt:: bash $
+
+ ceph osd reweight-by-utilization [threshold [max_change [max_osds]]] [--no-increasing]
+
+To limit the step by which any OSD's reweight will be changed, specify
+``max_change`` which defaults to 0.05. To limit the number of OSDs that will
+be adjusted, specify ``max_osds`` as well; the default is 4. Increasing these
+parameters can speed leveling of OSD utilization, at the potential cost of
+greater impact on client operations due to more data moving at once.
+
+To determine which and how many PGs and OSDs will be affected by a given invocation
+you can test before executing. :
+
+.. prompt:: bash $
+
+ ceph osd test-reweight-by-utilization [threshold [max_change max_osds]] [--no-increasing]
+
+Adding ``--no-increasing`` to either command prevents increasing any
+override weights that are currently < 1.00000. This can be useful when
+you are balancing in a hurry to remedy ``full`` or ``nearful`` OSDs or
+when some OSDs are being evacuated or slowly brought into service.
+
+Deployments utilizing Nautilus (or later revisions of Luminous and Mimic)
+that have no pre-Luminous cients may instead wish to instead enable the
+`balancer`` module for ``ceph-mgr``.
+
+Add/remove an IP address or CIDR range to/from the blocklist.
+When adding to the blocklist,
+you can specify how long it should be blocklisted in seconds; otherwise,
+it will default to 1 hour. A blocklisted address is prevented from
+connecting to any OSD. If you blocklist an IP or range containing an OSD, be aware
+that OSD will also be prevented from performing operations on its peers where it
+acts as a client. (This includes tiering and copy-from functionality.)
+
+If you want to blocklist a range (in CIDR format), you may do so by
+including the ``range`` keyword.
+
+These commands are mostly only useful for failure testing, as
+blocklists are normally maintained automatically and shouldn't need
+manual intervention. :
+
+.. prompt:: bash $
+
+ ceph osd blocklist ["range"] add ADDRESS[:source_port][/netmask_bits] [TIME]
+ ceph osd blocklist ["range"] rm ADDRESS[:source_port][/netmask_bits]
+
+Creates/deletes a snapshot of a pool. :
+
+.. prompt:: bash $
+
+ ceph osd pool mksnap {pool-name} {snap-name}
+ ceph osd pool rmsnap {pool-name} {snap-name}
+
+Creates/deletes/renames a storage pool. :
+
+.. prompt:: bash $
+
+ ceph osd pool create {pool-name} [pg_num [pgp_num]]
+ ceph osd pool delete {pool-name} [{pool-name} --yes-i-really-really-mean-it]
+ ceph osd pool rename {old-name} {new-name}
+
+Changes a pool setting. :
+
+.. prompt:: bash $
+
+ ceph osd pool set {pool-name} {field} {value}
+
+Valid fields are:
+
+ * ``size``: Sets the number of copies of data in the pool.
+ * ``pg_num``: The placement group number.
+ * ``pgp_num``: Effective number when calculating pg placement.
+ * ``crush_rule``: rule number for mapping placement.
+
+Get the value of a pool setting. :
+
+.. prompt:: bash $
+
+ ceph osd pool get {pool-name} {field}
+
+Valid fields are:
+
+ * ``pg_num``: The placement group number.
+ * ``pgp_num``: Effective number of placement groups when calculating placement.
+
+
+Sends a scrub command to OSD ``{osd-num}``. To send the command to all OSDs, use ``*``. :
+
+.. prompt:: bash $
+
+ ceph osd scrub {osd-num}
+
+Sends a repair command to OSD.N. To send the command to all OSDs, use ``*``. :
+
+.. prompt:: bash $
+
+ ceph osd repair N
+
+Runs a simple throughput benchmark against OSD.N, writing ``TOTAL_DATA_BYTES``
+in write requests of ``BYTES_PER_WRITE`` each. By default, the test
+writes 1 GB in total in 4-MB increments.
+The benchmark is non-destructive and will not overwrite existing live
+OSD data, but might temporarily affect the performance of clients
+concurrently accessing the OSD. :
+
+.. prompt:: bash $
+
+ ceph tell osd.N bench [TOTAL_DATA_BYTES] [BYTES_PER_WRITE]
+
+To clear an OSD's caches between benchmark runs, use the 'cache drop' command :
+
+.. prompt:: bash $
+
+ ceph tell osd.N cache drop
+
+To get the cache statistics of an OSD, use the 'cache status' command :
+
+.. prompt:: bash $
+
+ ceph tell osd.N cache status
+
+MDS Subsystem
+=============
+
+Change configuration parameters on a running mds. :
+
+.. prompt:: bash $
+
+ ceph tell mds.{mds-id} config set {setting} {value}
+
+Example:
+
+.. prompt:: bash $
+
+ ceph tell mds.0 config set debug_ms 1
+
+Enables debug messages. :
+
+.. prompt:: bash $
+
+ ceph mds stat
+
+Displays the status of all metadata servers. :
+
+.. prompt:: bash $
+
+ ceph mds fail 0
+
+Marks the active MDS as failed, triggering failover to a standby if present.
+
+.. todo:: ``ceph mds`` subcommands missing docs: set, dump, getmap, stop, setmap
+
+
+Mon Subsystem
+=============
+
+Show monitor stats:
+
+.. prompt:: bash $
+
+ ceph mon stat
+
+::
+
+ e2: 3 mons at {a=127.0.0.1:40000/0,b=127.0.0.1:40001/0,c=127.0.0.1:40002/0}, election epoch 6, quorum 0,1,2 a,b,c
+
+
+The ``quorum`` list at the end lists monitor nodes that are part of the current quorum.
+
+This is also available more directly:
+
+.. prompt:: bash $
+
+ ceph quorum_status -f json-pretty
+
+.. code-block:: javascript
+
+ {
+ "election_epoch": 6,
+ "quorum": [
+ 0,
+ 1,
+ 2
+ ],
+ "quorum_names": [
+ "a",
+ "b",
+ "c"
+ ],
+ "quorum_leader_name": "a",
+ "monmap": {
+ "epoch": 2,
+ "fsid": "ba807e74-b64f-4b72-b43f-597dfe60ddbc",
+ "modified": "2016-12-26 14:42:09.288066",
+ "created": "2016-12-26 14:42:03.573585",
+ "features": {
+ "persistent": [
+ "kraken"
+ ],
+ "optional": []
+ },
+ "mons": [
+ {
+ "rank": 0,
+ "name": "a",
+ "addr": "127.0.0.1:40000\/0",
+ "public_addr": "127.0.0.1:40000\/0"
+ },
+ {
+ "rank": 1,
+ "name": "b",
+ "addr": "127.0.0.1:40001\/0",
+ "public_addr": "127.0.0.1:40001\/0"
+ },
+ {
+ "rank": 2,
+ "name": "c",
+ "addr": "127.0.0.1:40002\/0",
+ "public_addr": "127.0.0.1:40002\/0"
+ }
+ ]
+ }
+ }
+
+
+The above will block until a quorum is reached.
+
+For a status of just a single monitor:
+
+.. prompt:: bash $
+
+ ceph tell mon.[name] mon_status
+
+where the value of ``[name]`` can be taken from ``ceph quorum_status``. Sample
+output::
+
+ {
+ "name": "b",
+ "rank": 1,
+ "state": "peon",
+ "election_epoch": 6,
+ "quorum": [
+ 0,
+ 1,
+ 2
+ ],
+ "features": {
+ "required_con": "9025616074522624",
+ "required_mon": [
+ "kraken"
+ ],
+ "quorum_con": "1152921504336314367",
+ "quorum_mon": [
+ "kraken"
+ ]
+ },
+ "outside_quorum": [],
+ "extra_probe_peers": [],
+ "sync_provider": [],
+ "monmap": {
+ "epoch": 2,
+ "fsid": "ba807e74-b64f-4b72-b43f-597dfe60ddbc",
+ "modified": "2016-12-26 14:42:09.288066",
+ "created": "2016-12-26 14:42:03.573585",
+ "features": {
+ "persistent": [
+ "kraken"
+ ],
+ "optional": []
+ },
+ "mons": [
+ {
+ "rank": 0,
+ "name": "a",
+ "addr": "127.0.0.1:40000\/0",
+ "public_addr": "127.0.0.1:40000\/0"
+ },
+ {
+ "rank": 1,
+ "name": "b",
+ "addr": "127.0.0.1:40001\/0",
+ "public_addr": "127.0.0.1:40001\/0"
+ },
+ {
+ "rank": 2,
+ "name": "c",
+ "addr": "127.0.0.1:40002\/0",
+ "public_addr": "127.0.0.1:40002\/0"
+ }
+ ]
+ }
+ }
+
+A dump of the monitor state:
+
+ .. prompt:: bash $
+
+ ceph mon dump
+
+ ::
+
+ dumped monmap epoch 2
+ epoch 2
+ fsid ba807e74-b64f-4b72-b43f-597dfe60ddbc
+ last_changed 2016-12-26 14:42:09.288066
+ created 2016-12-26 14:42:03.573585
+ 0: 127.0.0.1:40000/0 mon.a
+ 1: 127.0.0.1:40001/0 mon.b
+ 2: 127.0.0.1:40002/0 mon.c
+
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 21:32:42 +0000