diff options
Diffstat (limited to '')
| -rw-r--r-- | src/spdk/doc/vagrant.md | 168 |
1 files changed, 168 insertions, 0 deletions
diff --git a/src/spdk/doc/vagrant.md b/src/spdk/doc/vagrant.md new file mode 100644 index 000000000..f362a89d2 --- /dev/null +++ b/src/spdk/doc/vagrant.md @@ -0,0 +1,168 @@ +# Vagrant Development Environment {#vagrant} + +# Introduction {#vagrant_intro} + +[Vagrant](https://www.vagrantup.com/) provides a quick way to get a basic +NVMe enabled virtual machine sandbox running without the need for any +special hardware. +The Vagrant environment for SPDK has support for a variety of Linux distributions as well as FreeBSD. +Run scripts/vagrant/create_vbox.sh -h to see the complete list. +This environment requires Vagrant 1.9.4 or newer and +VirtualBox 5.1 or newer with the matching VirtualBox extension pack. + +Note: If you are behind a corporate firewall, set `http_proxy` and `https_proxy` in +your environment before trying to start up the VM. Also make sure that you +have installed the optional vagrant module `vagrant-proxyconf`: + +~~~{.sh} +export http_proxy=... +export https_proxy=... +vagrant plugin install vagrant-proxyconf +~~~ + +In case you want use kvm/libvirt you should also install `vagrant-libvirt` + +# VM Configuration {#vagrant_config} + +To create a configured VM with vagrant you need to run `create_vbox.sh` script. + +Basically, the script will create a new sub-directory based on distribution you choose, +copy the vagrant configuration file (a.k.a. `Vagrantfile`) to it, +and run `vagrant up` with some settings defined by the script arguments. + +By default, the VM created is configured with: + +- 2 vCPUs +- 4G of RAM +- 2 NICs (1 x NAT - host access, 1 x private network) + +In order to modify some advanced settings like provisioning and rsyncing, +you may want to change Vagrantfile source. + +For additional support, use the Vagrant help function to learn how to destroy, restart, etc. +Further below is sample output from a successful VM launch and execution of the NVMe hello +world example application. + +~~~{.sh} + vagrant --help +~~~ + +# Running An Example {#vagrant_example} + +The following shows sample output from starting up a Ubuntu18 VM, +compiling SPDK on it and running the NVMe sample application `hello_world`. +If you don't see the NVMe device as seen below in both the `lspci` output as well as the +application output, you likely have a VirtualBox and/or Vagrant +versioning issue. + +~~~{.sh} +user@dev-system:~$ cd spdk/scripts/vagrant +user@dev-system:~/spdk/scripts/vagrant$ ./create_vbox.sh ubuntu18 +mkdir: created directory '/home/user/spdk/scripts/vagrant/ubuntu18' +~/spdk/scripts/vagrant/ubuntu18 ~/spdk/scripts/vagrant +vagrant-proxyconf already installed... skipping +Bringing machine 'default' up with 'virtualbox' provider... +==> default: Box 'bento/ubuntu-18.04' could not be found. Attempting to find and install... + default: Box Provider: virtualbox + default: Box Version: 201803.24.0 +==> default: Loading metadata for box 'bento/ubuntu-18.04' + default: URL: https://vagrantcloud.com/bento/ubuntu-18.04 +==> default: Adding box 'bento/ubuntu-18.04' (v201803.24.0) for provider: virtualbox + default: Downloading: https://vagrantcloud.com/bento/boxes/ubuntu-18.04/versions/201803.24.0/providers/virtualbox.box +==> default: Box download is resuming from prior download progress +==> default: Successfully added box 'bento/ubuntu-18.04' (v201803.24.0) for 'virtualbox'! +==> default: Importing base box 'bento/ubuntu-18.04'... +==> default: Matching MAC address for NAT networking... +==> default: Setting the name of the VM: ubuntu18_default_1237088131451_82174 +==> default: Fixed port collision for 22 => 2222. Now on port 2202. +==> default: Clearing any previously set network interfaces... +==> default: Preparing network interfaces based on configuration... + default: Adapter 1: nat + default: Adapter 2: hostonly +==> default: Forwarding ports... + default: 22 (guest) => 2202 (host) (adapter 1) +==> default: Running 'pre-boot' VM customizations... +==> default: Booting VM... +==> default: Waiting for machine to boot. This may take a few minutes... + default: SSH address: 127.0.0.1:2202 + default: SSH username: vagrant + default: SSH auth method: private key + default: Warning: Remote connection disconnect. Retrying... + default: Warning: Connection reset. Retrying... +<<some output trimmed>> + default: Warning: Connection reset. Retrying... + default: Warning: Remote connection disconnect. Retrying... + default: + default: Vagrant insecure key detected. Vagrant will automatically replace + default: this with a newly generated keypair for better security. + default: + default: Inserting generated public key within guest... + default: Removing insecure key from the guest if it's present... + default: Key inserted! Disconnecting and reconnecting using new SSH key... +==> default: Machine booted and ready! +==> default: Checking for guest additions in VM... +==> default: Configuring and enabling network interfaces... +==> default: Configuring proxy for Apt... +==> default: Configuring proxy environment variables... +==> default: Rsyncing folder: /home/user/spdk/ => /home/vagrant/spdk_repo/spdk +==> default: Mounting shared folders... + default: /vagrant => /home/user/spdk/scripts/vagrant/ubuntu18 +==> default: Running provisioner: file... + + SUCCESS! + + cd to ubuntu18 and type "vagrant ssh" to use. + Use vagrant "suspend" and vagrant "resume" to stop and start. + Use vagrant "destroy" followed by "rm -rf ubuntu18" to destroy all trace of vm. +~~~ + +Check the enviroment. + +~~~{.sh} +user@dev-system:~/spdk/scripts/vagrant$ cd ubuntu18 +user@dev-system:~/spdk/scripts/vagrant/ubuntu18$ vagrant ssh +Welcome to Ubuntu Bionic Beaver (development branch) (GNU/Linux 4.15.0-12-generic x86_64) +<<some output trimmed>> +vagrant@vagrant:~$ lspci | grep "Non-Volatile" +00:0e.0 Non-Volatile memory controller: InnoTek Systemberatung GmbH Device 4e56 +vagrant@vagrant:~$ ls +spdk_repo +~~~ + +Compiling SPDK and running an example. + +~~~{.sh} +vagrant@vagrant:~/spdk_repo/spdk$ sudo apt update +<<output trimmed>> +vagrant@vagrant:~/spdk_repo/spdk$ sudo scripts/pkgdep.sh +<<output trimmed>> + +vagrant@vagrant:~/spdk_repo/spdk$ ./configure +Creating mk/config.mk...done. +Type 'make' to build. + +vagrant@vagrant:~/spdk_repo/spdk$ make +<<output trimmed>> + +vagrant@vagrant:~/spdk_repo/spdk$ sudo ./scripts/setup.sh +0000:00:0e.0 (80ee 4e56): nvme -> uio_pci_generic + +vagrant@vagrant:~/spdk_repo/spdk$ sudo build/examples/hello_world +Starting SPDK v18.10-pre / DPDK 18.05.0 initialization... +[ DPDK EAL parameters: hello_world -c 0x1 --legacy-mem --file-prefix=spdk0 --base-virtaddr=0x200000000000 --proc-type=auto ] +EAL: Detected 4 lcore(s) +EAL: Detected 1 NUMA nodes +EAL: Auto-detected process type: PRIMARY +EAL: Multi-process socket /var/run/dpdk/spdk0/mp_socket +EAL: Probing VFIO support... +Initializing NVMe Controllers +EAL: PCI device 0000:00:0e.0 on NUMA socket 0 +EAL: probe driver: 80ee:4e56 spdk_nvme +Attaching to 0000:00:0e.0 +Attached to 0000:00:0e.0 +Using controller ORCL-VBOX-NVME-VER12 (VB1234-56789 ) with 1 namespaces. + Namespace ID: 1 size: 1GB +Initialization complete. +INFO: using host memory buffer for IO +Hello world! +~~~ |