diff options
Diffstat (limited to '')
| -rw-r--r-- | src/spdk/isa-l/include/crc.h | 212 |
1 files changed, 212 insertions, 0 deletions
diff --git a/src/spdk/isa-l/include/crc.h b/src/spdk/isa-l/include/crc.h new file mode 100644 index 000000000..071496083 --- /dev/null +++ b/src/spdk/isa-l/include/crc.h @@ -0,0 +1,212 @@ +/********************************************************************** + Copyright(c) 2011-2015 Intel Corporation All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +**********************************************************************/ + + +/** + * @file crc.h + * @brief CRC functions. + */ + + +#ifndef _CRC_H_ +#define _CRC_H_ + +#include <stdint.h> + +#ifdef __cplusplus +extern "C" { +#endif + + +/* Multi-binary functions */ + +/** + * @brief Generate CRC from the T10 standard, runs appropriate version. + * + * This function determines what instruction sets are enabled and + * selects the appropriate version at runtime. + * + * @returns 16 bit CRC + */ +uint16_t crc16_t10dif( + uint16_t init_crc, //!< initial CRC value, 16 bits + const unsigned char *buf, //!< buffer to calculate CRC on + uint64_t len //!< buffer length in bytes (64-bit data) + ); + + +/** + * @brief Generate CRC and copy T10 standard, runs appropriate version. + * + * Stitched CRC + copy function. + * + * @returns 16 bit CRC + */ +uint16_t crc16_t10dif_copy( + uint16_t init_crc, //!< initial CRC value, 16 bits + uint8_t *dst, //!< buffer destination for copy + uint8_t *src, //!< buffer source to crc + copy + uint64_t len //!< buffer length in bytes (64-bit data) + ); + + +/** + * @brief Generate CRC from the IEEE standard, runs appropriate version. + * + * This function determines what instruction sets are enabled and + * selects the appropriate version at runtime. + * Note: CRC32 IEEE standard is widely used in HDLC, Ethernet, Gzip and + * many others. Its polynomial is 0x04C11DB7 in normal and 0xEDB88320 + * in reflection (or reverse). In ISA-L CRC, function crc32_ieee is + * actually designed for normal CRC32 IEEE version. And function + * crc32_gzip_refl is actually designed for reflected CRC32 IEEE. + * These two versions of CRC32 IEEE are not compatible with each other. + * Users who want to replace their not optimized crc32 ieee with ISA-L's + * crc32 function should be careful of that. + * Since many applications use CRC32 IEEE reflected version, Please have + * a check whether crc32_gzip_refl is right one for you instead of + * crc32_ieee. + * + * @returns 32 bit CRC + */ + +uint32_t crc32_ieee( + uint32_t init_crc, //!< initial CRC value, 32 bits + const unsigned char *buf, //!< buffer to calculate CRC on + uint64_t len //!< buffer length in bytes (64-bit data) + ); + +/** + * @brief Generate the customized CRC + * based on RFC 1952 CRC (http://www.ietf.org/rfc/rfc1952.txt) standard, + * runs appropriate version. + * + * This function determines what instruction sets are enabled and + * selects the appropriate version at runtime. + * + * Note: CRC32 IEEE standard is widely used in HDLC, Ethernet, Gzip and + * many others. Its polynomial is 0x04C11DB7 in normal and 0xEDB88320 + * in reflection (or reverse). In ISA-L CRC, function crc32_ieee is + * actually designed for normal CRC32 IEEE version. And function + * crc32_gzip_refl is actually designed for reflected CRC32 IEEE. + * These two versions of CRC32 IEEE are not compatible with each other. + * Users who want to replace their not optimized crc32 ieee with ISA-L's + * crc32 function should be careful of that. + * Since many applications use CRC32 IEEE reflected version, Please have + * a check whether crc32_gzip_refl is right one for you instead of + * crc32_ieee. + * + * @returns 32 bit CRC + */ +uint32_t crc32_gzip_refl( + uint32_t init_crc, //!< initial CRC value, 32 bits + const unsigned char *buf, //!< buffer to calculate CRC on + uint64_t len //!< buffer length in bytes (64-bit data) + ); + + +/** + * @brief ISCSI CRC function, runs appropriate version. + * + * This function determines what instruction sets are enabled and + * selects the appropriate version at runtime. + * + * @returns 32 bit CRC + */ +unsigned int crc32_iscsi( + unsigned char *buffer, //!< buffer to calculate CRC on + int len, //!< buffer length in bytes + unsigned int init_crc //!< initial CRC value + ); + + +/* Base functions */ + +/** + * @brief ISCSI CRC function, baseline version + * @returns 32 bit CRC + */ +unsigned int crc32_iscsi_base( + unsigned char *buffer, //!< buffer to calculate CRC on + int len, //!< buffer length in bytes + unsigned int crc_init //!< initial CRC value + ); + + +/** + * @brief Generate CRC from the T10 standard, runs baseline version + * @returns 16 bit CRC + */ +uint16_t crc16_t10dif_base( + uint16_t seed, //!< initial CRC value, 16 bits + uint8_t *buf, //!< buffer to calculate CRC on + uint64_t len //!< buffer length in bytes (64-bit data) + ); + + +/** + * @brief Generate CRC and copy T10 standard, runs baseline version. + * @returns 16 bit CRC + */ +uint16_t crc16_t10dif_copy_base( + uint16_t init_crc, //!< initial CRC value, 16 bits + uint8_t *dst, //!< buffer destination for copy + uint8_t *src, //!< buffer source to crc + copy + uint64_t len //!< buffer length in bytes (64-bit data) + ); + + +/** + * @brief Generate CRC from the IEEE standard, runs baseline version + * @returns 32 bit CRC + */ +uint32_t crc32_ieee_base( + uint32_t seed, //!< initial CRC value, 32 bits + uint8_t *buf, //!< buffer to calculate CRC on + uint64_t len //!< buffer length in bytes (64-bit data) + ); + +/** + * @brief Generate the customized CRC + * based on RFC 1952 CRC (http://www.ietf.org/rfc/rfc1952.txt) standard, + * runs baseline version + * @returns 32 bit CRC + */ +uint32_t crc32_gzip_refl_base( + uint32_t seed, //!< initial CRC value, 32 bits + uint8_t *buf, //!< buffer to calculate CRC on + uint64_t len //!< buffer length in bytes (64-bit data) + ); + + +#ifdef __cplusplus +} +#endif + +#endif // _CRC_H_ |