From 19fcec84d8d7d21e796c7624e521b60d28ee21ed Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:45:59 +0200 Subject: Adding upstream version 16.2.11+ds. Signed-off-by: Daniel Baumann --- doc/dev/developer_guide/essentials.rst | 338 +++++++++++++++++++++++++++++++++ 1 file changed, 338 insertions(+) create mode 100644 doc/dev/developer_guide/essentials.rst (limited to 'doc/dev/developer_guide/essentials.rst') diff --git a/doc/dev/developer_guide/essentials.rst b/doc/dev/developer_guide/essentials.rst new file mode 100644 index 000000000..2fe7a13cd --- /dev/null +++ b/doc/dev/developer_guide/essentials.rst @@ -0,0 +1,338 @@ +Essentials (tl;dr) +================== + +This chapter presents essential information that every Ceph developer needs +to know. + +Leads +----- + +The Ceph project is led by Sage Weil. In addition, each major project +component has its own lead. The following table shows all the leads and +their nicks on `GitHub`_: + +.. _github: https://github.com/ + +========= ================ ============= +Scope Lead GitHub nick +========= ================ ============= +Ceph Sage Weil liewegas +RADOS Neha Ojha neha-ojha +RGW Yehuda Sadeh yehudasa +RGW Matt Benjamin mattbenjamin +RBD Jason Dillaman dillaman +CephFS Patrick Donnelly batrick +Dashboard Lenz Grimmer LenzGr +MON Joao Luis jecluis +Build/Ops Ken Dreyer ktdreyer +Docs Zac Dover zdover23 +========= ================ ============= + +The Ceph-specific acronyms in the table are explained in +:doc:`/architecture`. + +History +------- + +See the `History chapter of the Wikipedia article`_. + +.. _`History chapter of the Wikipedia article`: https://en.wikipedia.org/wiki/Ceph_%28software%29#History + +Licensing +--------- + +Ceph is free software. + +Unless stated otherwise, the Ceph source code is distributed under the +terms of the LGPL2.1 or LGPL3.0. For full details, see the file +`COPYING`_ in the top-level directory of the source-code tree. + +.. _`COPYING`: + https://github.com/ceph/ceph/blob/master/COPYING + +Source code repositories +------------------------ + +The source code of Ceph lives on `GitHub`_ in a number of repositories below +the `Ceph "organization"`_. + +.. _`Ceph "organization"`: https://github.com/ceph + +A working knowledge of git_ is essential to make a meaningful contribution to the project as a developer. + +.. _git: https://git-scm.com/doc + +Although the `Ceph "organization"`_ includes several software repositories, +this document covers only one: https://github.com/ceph/ceph. + +Redmine issue tracker +--------------------- + +Although `GitHub`_ is used for code, Ceph-related issues (Bugs, Features, +Backports, Documentation, etc.) are tracked at http://tracker.ceph.com, +which is powered by `Redmine`_. + +.. _Redmine: http://www.redmine.org + +The tracker has a Ceph project with a number of subprojects loosely +corresponding to the various architectural components (see +:doc:`/architecture`). + +Mere `registration`_ in the tracker automatically grants permissions +sufficient to open new issues and comment on existing ones. + +.. _registration: http://tracker.ceph.com/account/register + +To report a bug or propose a new feature, `jump to the Ceph project`_ and +click on `New issue`_. + +.. _`jump to the Ceph project`: http://tracker.ceph.com/projects/ceph +.. _`New issue`: http://tracker.ceph.com/projects/ceph/issues/new + +.. _mailing-list: + +Mailing lists +------------- + +Ceph Development Mailing List +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The ``dev@ceph.io`` list is for discussion about the development of Ceph, +its interoperability with other technology, and the operations of the +project itself. + +The email discussion list for Ceph development is open to all. Subscribe by +sending a message to ``dev-request@ceph.io`` with the following line in the +body of the message:: + + subscribe ceph-devel + + +Ceph Client Patch Review Mailing List +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The ``ceph-devel@vger.kernel.org`` list is for discussion and patch review +for the Linux kernel Ceph client component. Note that this list used to +be an all-encompassing list for developers. When searching the archives, +remember that this list contains the generic devel-ceph archives before mid-2018. + +Subscribe to the list covering the Linux kernel Ceph client component by sending +a message to ``majordomo@vger.kernel.org`` with the following line in the body +of the message:: + + subscribe ceph-devel + + +Other Ceph Mailing Lists +^^^^^^^^^^^^^^^^^^^^^^^^ + +There are also `other Ceph-related mailing lists`_. + +.. _`other Ceph-related mailing lists`: https://ceph.com/irc/ + +.. _irc: + + +IRC +--- + +In addition to mailing lists, the Ceph community also communicates in real time +using `Internet Relay Chat`_. + +.. _`Internet Relay Chat`: http://www.irchelp.org/ + +The Ceph community gathers in the #ceph channel of the Open and Free Technology +Community (OFTC) IRC network. + +Created in 1988, Internet Relay Chat (IRC) is a relay-based, real-time chat +protocol. It is mainly designed for group (many-to-many) communication in +discussion forums called channels, but also allows one-to-one communication via +private message. On IRC you can talk to many other members using Ceph, on +topics ranging from idle chit-chat to support questions. Though a channel might +have many people in it at any one time, they might not always be at their +keyboard; so if no-one responds, just wait around and someone will hopefully +answer soon enough. + +Registration +^^^^^^^^^^^^ + +If you intend to use the IRC service on a continued basis, you are advised to +register an account. Registering gives you a unique IRC identity and allows you +to access channels where unregistered users have been locked out for technical +reasons. + +See ``the official OFTC (Open and Free Technology Community) documentation's +registration instructions +`` to learn how to +register your IRC account. + +Channels +~~~~~~~~ + +To connect to the OFTC IRC network, download an IRC client and configure it to +connect to ``irc.oftc.net``. Then join one or more of the channels. Discussions +inside #ceph are logged and archives are available online. + +Here are the real-time discussion channels for the Ceph community: + + - #ceph + - #ceph-devel + - #cephfs + - #ceph-dashboard + - #ceph-orchestrators + - #sepia + +.. _submitting-patches: + +Submitting patches +------------------ + +The canonical instructions for submitting patches are contained in the +file `CONTRIBUTING.rst`_ in the top-level directory of the source-code +tree. There may be some overlap between this guide and that file. + +.. _`CONTRIBUTING.rst`: + https://github.com/ceph/ceph/blob/main/CONTRIBUTING.rst + +All newcomers are encouraged to read that file carefully. + +Building from source +-------------------- + +See instructions at :doc:`/install/build-ceph`. + +Using ccache to speed up local builds +------------------------------------- +`ccache`_ can make the process of rebuilding the ceph source tree faster. + +Before you use `ccache`_ to speed up your rebuilds of the ceph source tree, +make sure that your source tree is clean and will produce no build failures. +When you have a clean source tree, you can confidently use `ccache`_, secure in +the knowledge that you're not using a dirty tree. + +Old build artifacts can cause build failures. You might introduce these +artifacts unknowingly when switching from one branch to another. If you see +build errors when you attempt a local build, follow the procedure below to +clean your source tree. + +Cleaning the Source Tree +^^^^^^^^^^^^^^^^^^^^^^^^ + +.. prompt:: bash $ + + make clean + +.. note:: The following commands will remove everything in the source tree + that isn't tracked by git. Make sure to back up your log files + and configuration options before running these commands. + +.. prompt:: bash $ + + git clean -fdx; git submodule foreach git clean -fdx + +Building Ceph with ccache +^^^^^^^^^^^^^^^^^^^^^^^^^ +``ccache`` is available as a package in most distros. To build ceph with +ccache, run the following command. + +.. prompt:: bash $ + + cmake -DWITH_CCACHE=ON .. + +Using ccache to Speed Up Build Times +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +``ccache`` can be used for speeding up all builds of the system. For more +details, refer to the `run modes`_ section of the ccache manual. The default +settings of ``ccache`` can be displayed with the ``ccache -s`` command. + +.. note:: We recommend overriding the ``max_size``. The default is 10G. + Use a larger value, like 25G. Refer to the `configuration`_ section + of the ccache manual for more information. + +To further increase the cache hit rate and reduce compile times in a +development environment, set the version information and build timestamps to +fixed values. This makes it unnecessary to rebuild the binaries that contain +this information. + +This can be achieved by adding the following settings to the ``ccache`` +configuration file ``ccache.conf``:: + + sloppiness = time_macros + run_second_cpp = true + +Now, set the environment variable ``SOURCE_DATE_EPOCH`` to a fixed value (a +UNIX timestamp) and set ``ENABLE_GIT_VERSION`` to ``OFF`` when running +``cmake``: + +.. prompt:: bash $ + + export SOURCE_DATE_EPOCH=946684800 + cmake -DWITH_CCACHE=ON -DENABLE_GIT_VERSION=OFF .. + +.. note:: Binaries produced with these build options are not suitable for + production or debugging purposes, as they do not contain the correct build + time and git version information. + +.. _`ccache`: https://ccache.samba.org/ +.. _`run modes`: https://ccache.samba.org/manual.html#_run_modes +.. _`configuration`: https://ccache.samba.org/manual.html#_configuration + +Development-mode cluster +------------------------ + +See :doc:`/dev/quick_guide`. + +Kubernetes/Rook development cluster +----------------------------------- + +See :ref:`kubernetes-dev` + +.. _backporting: + +Backporting +----------- + +All bugfixes should be merged to the ``main`` branch before being +backported. To flag a bugfix for backporting, make sure it has a +`tracker issue`_ associated with it and set the ``Backport`` field to a +comma-separated list of previous releases (e.g. "hammer,jewel") that you think +need the backport. +The rest (including the actual backporting) will be taken care of by the +`Stable Releases and Backports`_ team. + +.. _`tracker issue`: http://tracker.ceph.com/ +.. _`Stable Releases and Backports`: http://tracker.ceph.com/projects/ceph-releases/wiki + +Dependabot +---------- + +Dependabot is a GitHub bot that scans the dependencies in the repositories for +security vulnerabilities (CVEs). If a fix is available for a discovered CVE, +Dependabot creates a pull request to update the dependency. + +Dependabot also indicates the compatibility score of the upgrade. This score is +based on the number of CI failures that occur in other GitHub repositories +where the fix was applied. + +With some configuration, Dependabot can perform non-security updates (for +example, it can upgrade to the latest minor version or patch version). + +Dependabot supports `several languages and package managers +`_. +As of July 2022, the Ceph project receives alerts only from pip (based on the +`requirements.txt` files) and npm (`package*.json`). It is possible to extend +these alerts to git submodules, Golang, and Java. As of July 2022, there is no +support for C++ package managers such as vcpkg, conan, C++20 modules. + +Many of the dependencies discovered by Dependabot will best be updated +elsewhere than the Ceph Github repository (distribution packages, for example, +will be a better place to update some of the dependencies). Nonetheless, the +list of new and existing vulnerabilities generated by Dependabot will be +useful. + +`Here is an example of a Dependabot pull request. +`_ + +Guidance for use of cluster log +------------------------------- + +If your patches emit messages to the Ceph cluster log, please consult +this: :doc:`/dev/logging`. -- cgit v1.2.3