From 19fcec84d8d7d21e796c7624e521b60d28ee21ed Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:45:59 +0200 Subject: Adding upstream version 16.2.11+ds. Signed-off-by: Daniel Baumann --- doc/rados/operations/monitoring-osd-pg.rst | 553 +++++++++++++++++++++++++++++ 1 file changed, 553 insertions(+) create mode 100644 doc/rados/operations/monitoring-osd-pg.rst (limited to 'doc/rados/operations/monitoring-osd-pg.rst') diff --git a/doc/rados/operations/monitoring-osd-pg.rst b/doc/rados/operations/monitoring-osd-pg.rst new file mode 100644 index 000000000..3b997bfb4 --- /dev/null +++ b/doc/rados/operations/monitoring-osd-pg.rst @@ -0,0 +1,553 @@ +========================= + Monitoring OSDs and PGs +========================= + +High availability and high reliability require a fault-tolerant approach to +managing hardware and software issues. Ceph has no single point-of-failure, and +can service requests for data in a "degraded" mode. Ceph's `data placement`_ +introduces a layer of indirection to ensure that data doesn't bind directly to +particular OSD addresses. This means that tracking down system faults requires +finding the `placement group`_ and the underlying OSDs at root of the problem. + +.. tip:: A fault in one part of the cluster may prevent you from accessing a + particular object, but that doesn't mean that you cannot access other objects. + When you run into a fault, don't panic. Just follow the steps for monitoring + your OSDs and placement groups. Then, begin troubleshooting. + +Ceph is generally self-repairing. However, when problems persist, monitoring +OSDs and placement groups will help you identify the problem. + + +Monitoring OSDs +=============== + +An OSD's status is either in the cluster (``in``) or out of the cluster +(``out``); and, it is either up and running (``up``), or it is down and not +running (``down``). If an OSD is ``up``, it may be either ``in`` the cluster +(you can read and write data) or it is ``out`` of the cluster. If it was +``in`` the cluster and recently moved ``out`` of the cluster, Ceph will migrate +placement groups to other OSDs. If an OSD is ``out`` of the cluster, CRUSH will +not assign placement groups to the OSD. If an OSD is ``down``, it should also be +``out``. + +.. note:: If an OSD is ``down`` and ``in``, there is a problem and the cluster + will not be in a healthy state. + +.. ditaa:: + + +----------------+ +----------------+ + | | | | + | OSD #n In | | OSD #n Up | + | | | | + +----------------+ +----------------+ + ^ ^ + | | + | | + v v + +----------------+ +----------------+ + | | | | + | OSD #n Out | | OSD #n Down | + | | | | + +----------------+ +----------------+ + +If you execute a command such as ``ceph health``, ``ceph -s`` or ``ceph -w``, +you may notice that the cluster does not always echo back ``HEALTH OK``. Don't +panic. With respect to OSDs, you should expect that the cluster will **NOT** +echo ``HEALTH OK`` in a few expected circumstances: + +#. You haven't started the cluster yet (it won't respond). +#. You have just started or restarted the cluster and it's not ready yet, + because the placement groups are getting created and the OSDs are in + the process of peering. +#. You just added or removed an OSD. +#. You just have modified your cluster map. + +An important aspect of monitoring OSDs is to ensure that when the cluster +is up and running that all OSDs that are ``in`` the cluster are ``up`` and +running, too. To see if all OSDs are running, execute: + +.. prompt:: bash $ + + ceph osd stat + +The result should tell you the total number of OSDs (x), +how many are ``up`` (y), how many are ``in`` (z) and the map epoch (eNNNN). :: + + x osds: y up, z in; epoch: eNNNN + +If the number of OSDs that are ``in`` the cluster is more than the number of +OSDs that are ``up``, execute the following command to identify the ``ceph-osd`` +daemons that are not running: + +.. prompt:: bash $ + + ceph osd tree + +:: + + #ID CLASS WEIGHT TYPE NAME STATUS REWEIGHT PRI-AFF + -1 2.00000 pool openstack + -3 2.00000 rack dell-2950-rack-A + -2 2.00000 host dell-2950-A1 + 0 ssd 1.00000 osd.0 up 1.00000 1.00000 + 1 ssd 1.00000 osd.1 down 1.00000 1.00000 + +.. tip:: The ability to search through a well-designed CRUSH hierarchy may help + you troubleshoot your cluster by identifying the physical locations faster. + +If an OSD is ``down``, start it: + +.. prompt:: bash $ + + sudo systemctl start ceph-osd@1 + +See `OSD Not Running`_ for problems associated with OSDs that stopped, or won't +restart. + + +PG Sets +======= + +When CRUSH assigns placement groups to OSDs, it looks at the number of replicas +for the pool and assigns the placement group to OSDs such that each replica of +the placement group gets assigned to a different OSD. For example, if the pool +requires three replicas of a placement group, CRUSH may assign them to +``osd.1``, ``osd.2`` and ``osd.3`` respectively. CRUSH actually seeks a +pseudo-random placement that will take into account failure domains you set in +your `CRUSH map`_, so you will rarely see placement groups assigned to nearest +neighbor OSDs in a large cluster. + +Ceph processes a client request using the **Acting Set**, which is the set of +OSDs that will actually handle the requests since they have a full and working +version of a placement group shard. The set of OSDs that should contain a shard +of a particular placement group as the **Up Set**, i.e. where data is +moved/copied to (or planned to be). + +In some cases, an OSD in the Acting Set is ``down`` or otherwise not able to +service requests for objects in the placement group. When these situations +arise, don't panic. Common examples include: + +- You added or removed an OSD. Then, CRUSH reassigned the placement group to + other OSDs--thereby changing the composition of the Acting Set and spawning + the migration of data with a "backfill" process. +- An OSD was ``down``, was restarted, and is now ``recovering``. +- An OSD in the Acting Set is ``down`` or unable to service requests, + and another OSD has temporarily assumed its duties. + +In most cases, the Up Set and the Acting Set are identical. When they are not, +it may indicate that Ceph is migrating the PG (it's remapped), an OSD is +recovering, or that there is a problem (i.e., Ceph usually echoes a "HEALTH +WARN" state with a "stuck stale" message in such scenarios). + +To retrieve a list of placement groups, execute: + +.. prompt:: bash $ + + ceph pg dump + +To view which OSDs are within the Acting Set or the Up Set for a given placement +group, execute: + +.. prompt:: bash $ + + ceph pg map {pg-num} + +The result should tell you the osdmap epoch (eNNN), the placement group number +({pg-num}), the OSDs in the Up Set (up[]), and the OSDs in the acting set +(acting[]):: + + osdmap eNNN pg {raw-pg-num} ({pg-num}) -> up [0,1,2] acting [0,1,2] + +.. note:: If the Up Set and Acting Set do not match, this may be an indicator + that the cluster rebalancing itself or of a potential problem with + the cluster. + + +Peering +======= + +Before you can write data to a placement group, it must be in an ``active`` +state, and it **should** be in a ``clean`` state. For Ceph to determine the +current state of a placement group, the primary OSD of the placement group +(i.e., the first OSD in the acting set), peers with the secondary and tertiary +OSDs to establish agreement on the current state of the placement group +(assuming a pool with 3 replicas of the PG). + + +.. ditaa:: + + +---------+ +---------+ +-------+ + | OSD 1 | | OSD 2 | | OSD 3 | + +---------+ +---------+ +-------+ + | | | + | Request To | | + | Peer | | + |-------------->| | + |<--------------| | + | Peering | + | | + | Request To | + | Peer | + |----------------------------->| + |<-----------------------------| + | Peering | + +The OSDs also report their status to the monitor. See `Configuring Monitor/OSD +Interaction`_ for details. To troubleshoot peering issues, see `Peering +Failure`_. + + +Monitoring Placement Group States +================================= + +If you execute a command such as ``ceph health``, ``ceph -s`` or ``ceph -w``, +you may notice that the cluster does not always echo back ``HEALTH OK``. After +you check to see if the OSDs are running, you should also check placement group +states. You should expect that the cluster will **NOT** echo ``HEALTH OK`` in a +number of placement group peering-related circumstances: + +#. You have just created a pool and placement groups haven't peered yet. +#. The placement groups are recovering. +#. You have just added an OSD to or removed an OSD from the cluster. +#. You have just modified your CRUSH map and your placement groups are migrating. +#. There is inconsistent data in different replicas of a placement group. +#. Ceph is scrubbing a placement group's replicas. +#. Ceph doesn't have enough storage capacity to complete backfilling operations. + +If one of the foregoing circumstances causes Ceph to echo ``HEALTH WARN``, don't +panic. In many cases, the cluster will recover on its own. In some cases, you +may need to take action. An important aspect of monitoring placement groups is +to ensure that when the cluster is up and running that all placement groups are +``active``, and preferably in the ``clean`` state. To see the status of all +placement groups, execute: + +.. prompt:: bash $ + + ceph pg stat + +The result should tell you the total number of placement groups (x), how many +placement groups are in a particular state such as ``active+clean`` (y) and the +amount of data stored (z). :: + + x pgs: y active+clean; z bytes data, aa MB used, bb GB / cc GB avail + +.. note:: It is common for Ceph to report multiple states for placement groups. + +In addition to the placement group states, Ceph will also echo back the amount of +storage capacity used (aa), the amount of storage capacity remaining (bb), and the total +storage capacity for the placement group. These numbers can be important in a +few cases: + +- You are reaching your ``near full ratio`` or ``full ratio``. +- Your data is not getting distributed across the cluster due to an + error in your CRUSH configuration. + + +.. topic:: Placement Group IDs + + Placement group IDs consist of the pool number (not pool name) followed + by a period (.) and the placement group ID--a hexadecimal number. You + can view pool numbers and their names from the output of ``ceph osd + lspools``. For example, the first pool created corresponds to + pool number ``1``. A fully qualified placement group ID has the + following form:: + + {pool-num}.{pg-id} + + And it typically looks like this:: + + 1.1f + + +To retrieve a list of placement groups, execute the following: + +.. prompt:: bash $ + + ceph pg dump + +You can also format the output in JSON format and save it to a file: + +.. prompt:: bash $ + + ceph pg dump -o {filename} --format=json + +To query a particular placement group, execute the following: + +.. prompt:: bash $ + + ceph pg {poolnum}.{pg-id} query + +Ceph will output the query in JSON format. + +The following subsections describe the common pg states in detail. + +Creating +-------- + +When you create a pool, it will create the number of placement groups you +specified. Ceph will echo ``creating`` when it is creating one or more +placement groups. Once they are created, the OSDs that are part of a placement +group's Acting Set will peer. Once peering is complete, the placement group +status should be ``active+clean``, which means a Ceph client can begin writing +to the placement group. + +.. ditaa:: + + /-----------\ /-----------\ /-----------\ + | Creating |------>| Peering |------>| Active | + \-----------/ \-----------/ \-----------/ + +Peering +------- + +When Ceph is Peering a placement group, Ceph is bringing the OSDs that +store the replicas of the placement group into **agreement about the state** +of the objects and metadata in the placement group. When Ceph completes peering, +this means that the OSDs that store the placement group agree about the current +state of the placement group. However, completion of the peering process does +**NOT** mean that each replica has the latest contents. + +.. topic:: Authoritative History + + Ceph will **NOT** acknowledge a write operation to a client, until + all OSDs of the acting set persist the write operation. This practice + ensures that at least one member of the acting set will have a record + of every acknowledged write operation since the last successful + peering operation. + + With an accurate record of each acknowledged write operation, Ceph can + construct and disseminate a new authoritative history of the placement + group--a complete, and fully ordered set of operations that, if performed, + would bring an OSD’s copy of a placement group up to date. + + +Active +------ + +Once Ceph completes the peering process, a placement group may become +``active``. The ``active`` state means that the data in the placement group is +generally available in the primary placement group and the replicas for read +and write operations. + + +Clean +----- + +When a placement group is in the ``clean`` state, the primary OSD and the +replica OSDs have successfully peered and there are no stray replicas for the +placement group. Ceph replicated all objects in the placement group the correct +number of times. + + +Degraded +-------- + +When a client writes an object to the primary OSD, the primary OSD is +responsible for writing the replicas to the replica OSDs. After the primary OSD +writes the object to storage, the placement group will remain in a ``degraded`` +state until the primary OSD has received an acknowledgement from the replica +OSDs that Ceph created the replica objects successfully. + +The reason a placement group can be ``active+degraded`` is that an OSD may be +``active`` even though it doesn't hold all of the objects yet. If an OSD goes +``down``, Ceph marks each placement group assigned to the OSD as ``degraded``. +The OSDs must peer again when the OSD comes back online. However, a client can +still write a new object to a ``degraded`` placement group if it is ``active``. + +If an OSD is ``down`` and the ``degraded`` condition persists, Ceph may mark the +``down`` OSD as ``out`` of the cluster and remap the data from the ``down`` OSD +to another OSD. The time between being marked ``down`` and being marked ``out`` +is controlled by ``mon osd down out interval``, which is set to ``600`` seconds +by default. + +A placement group can also be ``degraded``, because Ceph cannot find one or more +objects that Ceph thinks should be in the placement group. While you cannot +read or write to unfound objects, you can still access all of the other objects +in the ``degraded`` placement group. + + +Recovering +---------- + +Ceph was designed for fault-tolerance at a scale where hardware and software +problems are ongoing. When an OSD goes ``down``, its contents may fall behind +the current state of other replicas in the placement groups. When the OSD is +back ``up``, the contents of the placement groups must be updated to reflect the +current state. During that time period, the OSD may reflect a ``recovering`` +state. + +Recovery is not always trivial, because a hardware failure might cause a +cascading failure of multiple OSDs. For example, a network switch for a rack or +cabinet may fail, which can cause the OSDs of a number of host machines to fall +behind the current state of the cluster. Each one of the OSDs must recover once +the fault is resolved. + +Ceph provides a number of settings to balance the resource contention between +new service requests and the need to recover data objects and restore the +placement groups to the current state. The ``osd recovery delay start`` setting +allows an OSD to restart, re-peer and even process some replay requests before +starting the recovery process. The ``osd +recovery thread timeout`` sets a thread timeout, because multiple OSDs may fail, +restart and re-peer at staggered rates. The ``osd recovery max active`` setting +limits the number of recovery requests an OSD will entertain simultaneously to +prevent the OSD from failing to serve . The ``osd recovery max chunk`` setting +limits the size of the recovered data chunks to prevent network congestion. + + +Back Filling +------------ + +When a new OSD joins the cluster, CRUSH will reassign placement groups from OSDs +in the cluster to the newly added OSD. Forcing the new OSD to accept the +reassigned placement groups immediately can put excessive load on the new OSD. +Back filling the OSD with the placement groups allows this process to begin in +the background. Once backfilling is complete, the new OSD will begin serving +requests when it is ready. + +During the backfill operations, you may see one of several states: +``backfill_wait`` indicates that a backfill operation is pending, but is not +underway yet; ``backfilling`` indicates that a backfill operation is underway; +and, ``backfill_toofull`` indicates that a backfill operation was requested, +but couldn't be completed due to insufficient storage capacity. When a +placement group cannot be backfilled, it may be considered ``incomplete``. + +The ``backfill_toofull`` state may be transient. It is possible that as PGs +are moved around, space may become available. The ``backfill_toofull`` is +similar to ``backfill_wait`` in that as soon as conditions change +backfill can proceed. + +Ceph provides a number of settings to manage the load spike associated with +reassigning placement groups to an OSD (especially a new OSD). By default, +``osd_max_backfills`` sets the maximum number of concurrent backfills to and from +an OSD to 1. The ``backfill full ratio`` enables an OSD to refuse a +backfill request if the OSD is approaching its full ratio (90%, by default) and +change with ``ceph osd set-backfillfull-ratio`` command. +If an OSD refuses a backfill request, the ``osd backfill retry interval`` +enables an OSD to retry the request (after 30 seconds, by default). OSDs can +also set ``osd backfill scan min`` and ``osd backfill scan max`` to manage scan +intervals (64 and 512, by default). + + +Remapped +-------- + +When the Acting Set that services a placement group changes, the data migrates +from the old acting set to the new acting set. It may take some time for a new +primary OSD to service requests. So it may ask the old primary to continue to +service requests until the placement group migration is complete. Once data +migration completes, the mapping uses the primary OSD of the new acting set. + + +Stale +----- + +While Ceph uses heartbeats to ensure that hosts and daemons are running, the +``ceph-osd`` daemons may also get into a ``stuck`` state where they are not +reporting statistics in a timely manner (e.g., a temporary network fault). By +default, OSD daemons report their placement group, up through, boot and failure +statistics every half second (i.e., ``0.5``), which is more frequent than the +heartbeat thresholds. If the **Primary OSD** of a placement group's acting set +fails to report to the monitor or if other OSDs have reported the primary OSD +``down``, the monitors will mark the placement group ``stale``. + +When you start your cluster, it is common to see the ``stale`` state until +the peering process completes. After your cluster has been running for awhile, +seeing placement groups in the ``stale`` state indicates that the primary OSD +for those placement groups is ``down`` or not reporting placement group statistics +to the monitor. + + +Identifying Troubled PGs +======================== + +As previously noted, a placement group is not necessarily problematic just +because its state is not ``active+clean``. Generally, Ceph's ability to self +repair may not be working when placement groups get stuck. The stuck states +include: + +- **Unclean**: Placement groups contain objects that are not replicated the + desired number of times. They should be recovering. +- **Inactive**: Placement groups cannot process reads or writes because they + are waiting for an OSD with the most up-to-date data to come back ``up``. +- **Stale**: Placement groups are in an unknown state, because the OSDs that + host them have not reported to the monitor cluster in a while (configured + by ``mon osd report timeout``). + +To identify stuck placement groups, execute the following: + +.. prompt:: bash $ + + ceph pg dump_stuck [unclean|inactive|stale|undersized|degraded] + +See `Placement Group Subsystem`_ for additional details. To troubleshoot +stuck placement groups, see `Troubleshooting PG Errors`_. + + +Finding an Object Location +========================== + +To store object data in the Ceph Object Store, a Ceph client must: + +#. Set an object name +#. Specify a `pool`_ + +The Ceph client retrieves the latest cluster map and the CRUSH algorithm +calculates how to map the object to a `placement group`_, and then calculates +how to assign the placement group to an OSD dynamically. To find the object +location, all you need is the object name and the pool name. For example: + +.. prompt:: bash $ + + ceph osd map {poolname} {object-name} [namespace] + +.. topic:: Exercise: Locate an Object + + As an exercise, let's create an object. Specify an object name, a path + to a test file containing some object data and a pool name using the + ``rados put`` command on the command line. For example: + + .. prompt:: bash $ + + rados put {object-name} {file-path} --pool=data + rados put test-object-1 testfile.txt --pool=data + + To verify that the Ceph Object Store stored the object, execute the + following: + + .. prompt:: bash $ + + rados -p data ls + + Now, identify the object location: + + .. prompt:: bash $ + + ceph osd map {pool-name} {object-name} + ceph osd map data test-object-1 + + Ceph should output the object's location. For example:: + + osdmap e537 pool 'data' (1) object 'test-object-1' -> pg 1.d1743484 (1.4) -> up ([0,1], p0) acting ([0,1], p0) + + To remove the test object, simply delete it using the ``rados rm`` + command. For example: + + .. prompt:: bash $ + + rados rm test-object-1 --pool=data + + +As the cluster evolves, the object location may change dynamically. One benefit +of Ceph's dynamic rebalancing is that Ceph relieves you from having to perform +the migration manually. See the `Architecture`_ section for details. + +.. _data placement: ../data-placement +.. _pool: ../pools +.. _placement group: ../placement-groups +.. _Architecture: ../../../architecture +.. _OSD Not Running: ../../troubleshooting/troubleshooting-osd#osd-not-running +.. _Troubleshooting PG Errors: ../../troubleshooting/troubleshooting-pg#troubleshooting-pg-errors +.. _Peering Failure: ../../troubleshooting/troubleshooting-pg#failures-osd-peering +.. _CRUSH map: ../crush-map +.. _Configuring Monitor/OSD Interaction: ../../configuration/mon-osd-interaction/ +.. _Placement Group Subsystem: ../control#placement-group-subsystem -- cgit v1.2.3