From 19fcec84d8d7d21e796c7624e521b60d28ee21ed Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:45:59 +0200 Subject: Adding upstream version 16.2.11+ds. Signed-off-by: Daniel Baumann --- src/zstd/zlibWrapper/examples/example.c | 629 ++++++++++++++ src/zstd/zlibWrapper/examples/example_original.c | 618 +++++++++++++ src/zstd/zlibWrapper/examples/fitblk.c | 254 ++++++ src/zstd/zlibWrapper/examples/fitblk_original.c | 233 +++++ src/zstd/zlibWrapper/examples/minigzip.c | 640 ++++++++++++++ src/zstd/zlibWrapper/examples/zwrapbench.c | 1001 ++++++++++++++++++++++ 6 files changed, 3375 insertions(+) create mode 100644 src/zstd/zlibWrapper/examples/example.c create mode 100644 src/zstd/zlibWrapper/examples/example_original.c create mode 100644 src/zstd/zlibWrapper/examples/fitblk.c create mode 100644 src/zstd/zlibWrapper/examples/fitblk_original.c create mode 100644 src/zstd/zlibWrapper/examples/minigzip.c create mode 100644 src/zstd/zlibWrapper/examples/zwrapbench.c (limited to 'src/zstd/zlibWrapper/examples') diff --git a/src/zstd/zlibWrapper/examples/example.c b/src/zstd/zlibWrapper/examples/example.c new file mode 100644 index 000000000..9000f7a32 --- /dev/null +++ b/src/zstd/zlibWrapper/examples/example.c @@ -0,0 +1,629 @@ +/* example.c contains minimal changes required to be compiled with zlibWrapper: + * - #include "zlib.h" was changed to #include "zstd_zlibwrapper.h" + * - test_flush() and test_sync() use functions not supported by zlibWrapper + therefore they are disabled while zstd compression is turned on */ + +/* example.c -- usage example of the zlib compression library + */ +/* + Copyright (c) 1995-2006, 2011 Jean-loup Gailly + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgement in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + */ + +/* @(#) $Id$ */ + +#include "zstd_zlibwrapper.h" +#include + +#ifdef STDC +# include +# include +#endif + +#if defined(VMS) || defined(RISCOS) +# define TESTFILE "foo-gz" +#else +# define TESTFILE "foo.gz" +#endif + +#define CHECK_ERR(err, msg) { \ + if (err != Z_OK) { \ + fprintf(stderr, "%s error: %d\n", msg, err); \ + exit(1); \ + } \ +} + +z_const char hello[] = "hello, hello! I said hello, hello!"; +/* "hello world" would be more standard, but the repeated "hello" + * stresses the compression code better, sorry... + */ + +const char dictionary[] = "hello, hello!"; +uLong dictId; /* Adler32 value of the dictionary */ + +void test_deflate OF((Byte *compr, uLong comprLen)); +void test_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_large_deflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_large_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_flush OF((Byte *compr, uLong *comprLen)); +void test_sync OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_dict_deflate OF((Byte *compr, uLong comprLen)); +void test_dict_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +int main OF((int argc, char *argv[])); + + +#ifdef Z_SOLO + +void *myalloc OF((void *, unsigned, unsigned)); +void myfree OF((void *, void *)); + +void *myalloc(q, n, m) + void *q; + unsigned n, m; +{ + void *buf = calloc(n, m); + q = Z_NULL; + /* printf("myalloc %p n=%d m=%d\n", buf, n, m); */ + return buf; +} + +void myfree(void *q, void *p) +{ + /* printf("myfree %p\n", p); */ + q = Z_NULL; + free(p); +} + +static alloc_func zalloc = myalloc; +static free_func zfree = myfree; + +#else /* !Z_SOLO */ + +static alloc_func zalloc = (alloc_func)0; +static free_func zfree = (free_func)0; + +void test_compress OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_gzio OF((const char *fname, + Byte *uncompr, uLong uncomprLen)); + +/* =========================================================================== + * Test compress() and uncompress() + */ +void test_compress(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + uLong len = (uLong)strlen(hello)+1; + + err = compress(compr, &comprLen, (const Bytef*)hello, len); + CHECK_ERR(err, "compress"); + + strcpy((char*)uncompr, "garbage"); + + err = uncompress(uncompr, &uncomprLen, compr, comprLen); + CHECK_ERR(err, "uncompress"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad uncompress\n"); + exit(1); + } else { + printf("uncompress(): %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Test read/write of .gz files + */ +void test_gzio(fname, uncompr, uncomprLen) + const char *fname; /* compressed file name */ + Byte *uncompr; + uLong uncomprLen; +{ +#ifdef NO_GZCOMPRESS + fprintf(stderr, "NO_GZCOMPRESS -- gz* functions cannot compress\n"); +#else + int err; + int len = (int)strlen(hello)+1; + gzFile file; + z_off_t pos; + + file = gzopen(fname, "wb"); + if (file == NULL) { + fprintf(stderr, "gzopen error\n"); + exit(1); + } + gzputc(file, 'h'); + if (gzputs(file, "ello") != 4) { + fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err)); + exit(1); + } + if (gzprintf(file, ", %s! I said hello, hello!", "hello") != 8+21) { + fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err)); + exit(1); + } + gzseek(file, 1L, SEEK_CUR); /* add one zero byte */ + gzclose(file); + + file = gzopen(fname, "rb"); + if (file == NULL) { + fprintf(stderr, "gzopen error\n"); + exit(1); + } + strcpy((char*)uncompr, "garbage"); + + if (gzread(file, uncompr, (unsigned)uncomprLen) != len) { + fprintf(stderr, "gzread err: %s\n", gzerror(file, &err)); + exit(1); + } + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad gzread: %s\n", (char*)uncompr); + exit(1); + } else { + printf("gzread(): %s\n", (char*)uncompr); + } + + pos = gzseek(file, -8L, SEEK_CUR); + if (pos != 6+21 || gztell(file) != pos) { + fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n", + (long)pos, (long)gztell(file)); + exit(1); + } + + if (gzgetc(file) != ' ') { + fprintf(stderr, "gzgetc error\n"); + exit(1); + } + + if (gzungetc(' ', file) != ' ') { + fprintf(stderr, "gzungetc error\n"); + exit(1); + } + + gzgets(file, (char*)uncompr, (int)uncomprLen); + if (strlen((char*)uncompr) != 7) { /* " hello!" */ + fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err)); + exit(1); + } + if (strcmp((char*)uncompr, hello + 6+21)) { + fprintf(stderr, "bad gzgets after gzseek\n"); + exit(1); + } else { + printf("gzgets() after gzseek: %s\n", (char*)uncompr); + } + + gzclose(file); +#endif +} + +#endif /* Z_SOLO */ + +/* =========================================================================== + * Test deflate() with small buffers + */ +void test_deflate(compr, comprLen) + Byte *compr; + uLong comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + uLong len = (uLong)strlen(hello)+1; + + c_stream.zalloc = zalloc; + c_stream.zfree = zfree; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_in = (z_const unsigned char *)hello; + c_stream.next_out = compr; + + while (c_stream.total_in != len && c_stream.total_out < comprLen) { + c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */ + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + } + /* Finish the stream, still forcing small buffers: */ + for (;;) { + c_stream.avail_out = 1; + err = deflate(&c_stream, Z_FINISH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "deflate"); + } + + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with small buffers + */ +void test_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = zalloc; + d_stream.zfree = zfree; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = 0; + d_stream.next_out = uncompr; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) { + d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */ + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "inflate"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad inflate\n"); + exit(1); + } else { + printf("inflate(): %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Test deflate() with large buffers and dynamic change of compression level + */ +void test_large_deflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + + c_stream.zalloc = zalloc; + c_stream.zfree = zfree; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_BEST_SPEED); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_out = compr; + c_stream.avail_out = (uInt)comprLen; + + /* At this point, uncompr is still mostly zeroes, so it should compress + * very well: + */ + c_stream.next_in = uncompr; + c_stream.avail_in = (uInt)uncomprLen; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + if (c_stream.avail_in != 0) { + fprintf(stderr, "deflate not greedy\n"); + exit(1); + } + + /* Feed in already compressed data and switch to no compression: */ + deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY); + c_stream.next_in = compr; + c_stream.avail_in = (uInt)comprLen/2; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + + /* Switch back to compressing mode: */ + deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED); + c_stream.next_in = uncompr; + c_stream.avail_in = (uInt)uncomprLen; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + fprintf(stderr, "deflate should report Z_STREAM_END\n"); + exit(1); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with large buffers + */ +void test_large_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = zalloc; + d_stream.zfree = zfree; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = (uInt)comprLen; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + for (;;) { + d_stream.next_out = uncompr; /* discard the output */ + d_stream.avail_out = (uInt)uncomprLen; + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "large inflate"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (d_stream.total_out != 2*uncomprLen + comprLen/2) { + fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out); + exit(1); + } else { + printf("large_inflate(): OK\n"); + } +} + +/* =========================================================================== + * Test deflate() with full flush + */ +void test_flush(compr, comprLen) + Byte *compr; + uLong *comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + uInt len = (uInt)strlen(hello)+1; + + c_stream.zalloc = zalloc; + c_stream.zfree = zfree; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_in = (z_const unsigned char *)hello; + c_stream.next_out = compr; + c_stream.avail_in = 3; + c_stream.avail_out = (uInt)*comprLen; + err = deflate(&c_stream, Z_FULL_FLUSH); + CHECK_ERR(err, "deflate"); + + compr[3]++; /* force an error in first compressed block */ + c_stream.avail_in = len - 3; + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + CHECK_ERR(err, "deflate"); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); + + *comprLen = c_stream.total_out; +} + +/* =========================================================================== + * Test inflateSync() + */ +void test_sync(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = zalloc; + d_stream.zfree = zfree; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = 2; /* just read the zlib header */ + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + d_stream.next_out = uncompr; + d_stream.avail_out = (uInt)uncomprLen; + + inflate(&d_stream, Z_NO_FLUSH); + CHECK_ERR(err, "inflate"); + + d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */ + err = inflateSync(&d_stream); /* but skip the damaged part */ + CHECK_ERR(err, "inflateSync"); + + err = inflate(&d_stream, Z_FINISH); + if (err != Z_DATA_ERROR) { + fprintf(stderr, "inflate should report DATA_ERROR\n"); + /* Because of incorrect adler32 */ + exit(1); + } + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + printf("after inflateSync(): hel%s\n", (char *)uncompr); +} + +/* =========================================================================== + * Test deflate() with preset dictionary + */ +void test_dict_deflate(compr, comprLen) + Byte *compr; + uLong comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + + c_stream.zalloc = zalloc; + c_stream.zfree = zfree; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_BEST_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + err = deflateSetDictionary(&c_stream, + (const Bytef*)dictionary, (int)sizeof(dictionary)); + CHECK_ERR(err, "deflateSetDictionary"); + + dictId = c_stream.adler; + c_stream.next_out = compr; + c_stream.avail_out = (uInt)comprLen; + + c_stream.next_in = (z_const unsigned char *)hello; + c_stream.avail_in = (uInt)strlen(hello)+1; + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + fprintf(stderr, "deflate should report Z_STREAM_END\n"); + exit(1); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with a preset dictionary + */ +void test_dict_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = zalloc; + d_stream.zfree = zfree; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = (uInt)comprLen; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + d_stream.next_out = uncompr; + d_stream.avail_out = (uInt)uncomprLen; + + for (;;) { + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + if (err == Z_NEED_DICT) { + if (d_stream.adler != dictId) { + fprintf(stderr, "unexpected dictionary"); + exit(1); + } + err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary, + (int)sizeof(dictionary)); + } + CHECK_ERR(err, "inflate with dict"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad inflate with dict\n"); + exit(1); + } else { + printf("inflate with dictionary: %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Usage: example [output.gz [input.gz]] + */ + +int main(argc, argv) + int argc; + char *argv[]; +{ + Byte *compr, *uncompr; + uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */ + uLong uncomprLen = comprLen; + static const char* myVersion = ZLIB_VERSION; + + if (zlibVersion()[0] != myVersion[0]) { + fprintf(stderr, "incompatible zlib version\n"); + exit(1); + + } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) { + fprintf(stderr, "warning: different zlib version\n"); + } + + printf("zlib version %s = 0x%04x, compile flags = 0x%lx\n", + ZLIB_VERSION, ZLIB_VERNUM, zlibCompileFlags()); + if (ZWRAP_isUsingZSTDcompression()) printf("zstd version %s\n", zstdVersion()); + + compr = (Byte*)calloc((uInt)comprLen, 1); + uncompr = (Byte*)calloc((uInt)uncomprLen, 1); + /* compr and uncompr are cleared to avoid reading uninitialized + * data and to ensure that uncompr compresses well. + */ + if (compr == Z_NULL || uncompr == Z_NULL) { + printf("out of memory\n"); + exit(1); + } + +#ifdef Z_SOLO + argc = strlen(argv[0]); +#else + test_compress(compr, comprLen, uncompr, uncomprLen); + + test_gzio((argc > 1 ? argv[1] : TESTFILE), + uncompr, uncomprLen); +#endif + + test_deflate(compr, comprLen); + test_inflate(compr, comprLen, uncompr, uncomprLen); + + test_large_deflate(compr, comprLen, uncompr, uncomprLen); + test_large_inflate(compr, comprLen, uncompr, uncomprLen); + + if (!ZWRAP_isUsingZSTDcompression()) { + test_flush(compr, &comprLen); + test_sync(compr, comprLen, uncompr, uncomprLen); + } + comprLen = uncomprLen; + + test_dict_deflate(compr, comprLen); + test_dict_inflate(compr, comprLen, uncompr, uncomprLen); + + free(compr); + free(uncompr); + + return 0; +} diff --git a/src/zstd/zlibWrapper/examples/example_original.c b/src/zstd/zlibWrapper/examples/example_original.c new file mode 100644 index 000000000..649882bf0 --- /dev/null +++ b/src/zstd/zlibWrapper/examples/example_original.c @@ -0,0 +1,618 @@ +/* example.c -- usage example of the zlib compression library + */ +/* + Copyright (c) 1995-2006, 2011 Jean-loup Gailly + +This software is provided 'as-is', without any express or implied +warranty. In no event will the authors be held liable for any damages +arising from the use of this software. + +Permission is granted to anyone to use this software for any purpose, +including commercial applications, and to alter it and redistribute it +freely, subject to the following restrictions: + +1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgement in the product documentation would be + appreciated but is not required. +2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. +3. This notice may not be removed or altered from any source distribution. +*/ + +/* @(#) $Id$ */ + +#include "zlib.h" +#include + +#ifdef STDC +# include +# include +#endif + +#if defined(VMS) || defined(RISCOS) +# define TESTFILE "foo-gz" +#else +# define TESTFILE "foo.gz" +#endif + +#define CHECK_ERR(err, msg) { \ + if (err != Z_OK) { \ + fprintf(stderr, "%s error: %d\n", msg, err); \ + exit(1); \ + } \ +} + +z_const char hello[] = "hello, hello!"; +/* "hello world" would be more standard, but the repeated "hello" + * stresses the compression code better, sorry... + */ + +const char dictionary[] = "hello"; +uLong dictId; /* Adler32 value of the dictionary */ + +void test_deflate OF((Byte *compr, uLong comprLen)); +void test_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_large_deflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_large_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_flush OF((Byte *compr, uLong *comprLen)); +void test_sync OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_dict_deflate OF((Byte *compr, uLong comprLen)); +void test_dict_inflate OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +int main OF((int argc, char *argv[])); + + +#ifdef Z_SOLO + +void *myalloc OF((void *, unsigned, unsigned)); +void myfree OF((void *, void *)); + +void *myalloc(q, n, m) + void *q; + unsigned n, m; +{ + q = Z_NULL; + return calloc(n, m); +} + +void myfree(void *q, void *p) +{ + q = Z_NULL; + free(p); +} + +static alloc_func zalloc = myalloc; +static free_func zfree = myfree; + +#else /* !Z_SOLO */ + +static alloc_func zalloc = (alloc_func)0; +static free_func zfree = (free_func)0; + +void test_compress OF((Byte *compr, uLong comprLen, + Byte *uncompr, uLong uncomprLen)); +void test_gzio OF((const char *fname, + Byte *uncompr, uLong uncomprLen)); + +/* =========================================================================== + * Test compress() and uncompress() + */ +void test_compress(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + uLong len = (uLong)strlen(hello)+1; + + err = compress(compr, &comprLen, (const Bytef*)hello, len); + CHECK_ERR(err, "compress"); + + strcpy((char*)uncompr, "garbage"); + + err = uncompress(uncompr, &uncomprLen, compr, comprLen); + CHECK_ERR(err, "uncompress"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad uncompress\n"); + exit(1); + } else { + printf("uncompress(): %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Test read/write of .gz files + */ +void test_gzio(fname, uncompr, uncomprLen) + const char *fname; /* compressed file name */ + Byte *uncompr; + uLong uncomprLen; +{ +#ifdef NO_GZCOMPRESS + fprintf(stderr, "NO_GZCOMPRESS -- gz* functions cannot compress\n"); +#else + int err; + int len = (int)strlen(hello)+1; + gzFile file; + z_off_t pos; + + file = gzopen(fname, "wb"); + if (file == NULL) { + fprintf(stderr, "gzopen error\n"); + exit(1); + } + gzputc(file, 'h'); + if (gzputs(file, "ello") != 4) { + fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err)); + exit(1); + } + if (gzprintf(file, ", %s!", "hello") != 8) { + fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err)); + exit(1); + } + gzseek(file, 1L, SEEK_CUR); /* add one zero byte */ + gzclose(file); + + file = gzopen(fname, "rb"); + if (file == NULL) { + fprintf(stderr, "gzopen error\n"); + exit(1); + } + strcpy((char*)uncompr, "garbage"); + + if (gzread(file, uncompr, (unsigned)uncomprLen) != len) { + fprintf(stderr, "gzread err: %s\n", gzerror(file, &err)); + exit(1); + } + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad gzread: %s\n", (char*)uncompr); + exit(1); + } else { + printf("gzread(): %s\n", (char*)uncompr); + } + + pos = gzseek(file, -8L, SEEK_CUR); + if (pos != 6 || gztell(file) != pos) { + fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n", + (long)pos, (long)gztell(file)); + exit(1); + } + + if (gzgetc(file) != ' ') { + fprintf(stderr, "gzgetc error\n"); + exit(1); + } + + if (gzungetc(' ', file) != ' ') { + fprintf(stderr, "gzungetc error\n"); + exit(1); + } + + gzgets(file, (char*)uncompr, (int)uncomprLen); + if (strlen((char*)uncompr) != 7) { /* " hello!" */ + fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err)); + exit(1); + } + if (strcmp((char*)uncompr, hello + 6)) { + fprintf(stderr, "bad gzgets after gzseek\n"); + exit(1); + } else { + printf("gzgets() after gzseek: %s\n", (char*)uncompr); + } + + gzclose(file); +#endif +} + +#endif /* Z_SOLO */ + +/* =========================================================================== + * Test deflate() with small buffers + */ +void test_deflate(compr, comprLen) + Byte *compr; + uLong comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + uLong len = (uLong)strlen(hello)+1; + + c_stream.zalloc = zalloc; + c_stream.zfree = zfree; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_in = (z_const unsigned char *)hello; + c_stream.next_out = compr; + + while (c_stream.total_in != len && c_stream.total_out < comprLen) { + c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */ + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + } + /* Finish the stream, still forcing small buffers: */ + for (;;) { + c_stream.avail_out = 1; + err = deflate(&c_stream, Z_FINISH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "deflate"); + } + + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with small buffers + */ +void test_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = zalloc; + d_stream.zfree = zfree; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = 0; + d_stream.next_out = uncompr; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) { + d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */ + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "inflate"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad inflate\n"); + exit(1); + } else { + printf("inflate(): %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Test deflate() with large buffers and dynamic change of compression level + */ +void test_large_deflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + + c_stream.zalloc = zalloc; + c_stream.zfree = zfree; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_BEST_SPEED); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_out = compr; + c_stream.avail_out = (uInt)comprLen; + + /* At this point, uncompr is still mostly zeroes, so it should compress + * very well: + */ + c_stream.next_in = uncompr; + c_stream.avail_in = (uInt)uncomprLen; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + if (c_stream.avail_in != 0) { + fprintf(stderr, "deflate not greedy\n"); + exit(1); + } + + /* Feed in already compressed data and switch to no compression: */ + deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY); + c_stream.next_in = compr; + c_stream.avail_in = (uInt)comprLen/2; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + + /* Switch back to compressing mode: */ + deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED); + c_stream.next_in = uncompr; + c_stream.avail_in = (uInt)uncomprLen; + err = deflate(&c_stream, Z_NO_FLUSH); + CHECK_ERR(err, "deflate"); + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + fprintf(stderr, "deflate should report Z_STREAM_END\n"); + exit(1); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with large buffers + */ +void test_large_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = zalloc; + d_stream.zfree = zfree; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = (uInt)comprLen; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + for (;;) { + d_stream.next_out = uncompr; /* discard the output */ + d_stream.avail_out = (uInt)uncomprLen; + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + CHECK_ERR(err, "large inflate"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (d_stream.total_out != 2*uncomprLen + comprLen/2) { + fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out); + exit(1); + } else { + printf("large_inflate(): OK\n"); + } +} + +/* =========================================================================== + * Test deflate() with full flush + */ +void test_flush(compr, comprLen) + Byte *compr; + uLong *comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + uInt len = (uInt)strlen(hello)+1; + + c_stream.zalloc = zalloc; + c_stream.zfree = zfree; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + c_stream.next_in = (z_const unsigned char *)hello; + c_stream.next_out = compr; + c_stream.avail_in = 3; + c_stream.avail_out = (uInt)*comprLen; + err = deflate(&c_stream, Z_FULL_FLUSH); + CHECK_ERR(err, "deflate"); + + compr[3]++; /* force an error in first compressed block */ + c_stream.avail_in = len - 3; + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + CHECK_ERR(err, "deflate"); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); + + *comprLen = c_stream.total_out; +} + +/* =========================================================================== + * Test inflateSync() + */ +void test_sync(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = zalloc; + d_stream.zfree = zfree; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = 2; /* just read the zlib header */ + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + d_stream.next_out = uncompr; + d_stream.avail_out = (uInt)uncomprLen; + + inflate(&d_stream, Z_NO_FLUSH); + CHECK_ERR(err, "inflate"); + + d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */ + err = inflateSync(&d_stream); /* but skip the damaged part */ + CHECK_ERR(err, "inflateSync"); + + err = inflate(&d_stream, Z_FINISH); + if (err != Z_DATA_ERROR) { + fprintf(stderr, "inflate should report DATA_ERROR\n"); + /* Because of incorrect adler32 */ + exit(1); + } + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + printf("after inflateSync(): hel%s\n", (char *)uncompr); +} + +/* =========================================================================== + * Test deflate() with preset dictionary + */ +void test_dict_deflate(compr, comprLen) + Byte *compr; + uLong comprLen; +{ + z_stream c_stream; /* compression stream */ + int err; + + c_stream.zalloc = zalloc; + c_stream.zfree = zfree; + c_stream.opaque = (voidpf)0; + + err = deflateInit(&c_stream, Z_BEST_COMPRESSION); + CHECK_ERR(err, "deflateInit"); + + err = deflateSetDictionary(&c_stream, + (const Bytef*)dictionary, (int)sizeof(dictionary)); + CHECK_ERR(err, "deflateSetDictionary"); + + dictId = c_stream.adler; + c_stream.next_out = compr; + c_stream.avail_out = (uInt)comprLen; + + c_stream.next_in = (z_const unsigned char *)hello; + c_stream.avail_in = (uInt)strlen(hello)+1; + + err = deflate(&c_stream, Z_FINISH); + if (err != Z_STREAM_END) { + fprintf(stderr, "deflate should report Z_STREAM_END\n"); + exit(1); + } + err = deflateEnd(&c_stream); + CHECK_ERR(err, "deflateEnd"); +} + +/* =========================================================================== + * Test inflate() with a preset dictionary + */ +void test_dict_inflate(compr, comprLen, uncompr, uncomprLen) + Byte *compr, *uncompr; + uLong comprLen, uncomprLen; +{ + int err; + z_stream d_stream; /* decompression stream */ + + strcpy((char*)uncompr, "garbage"); + + d_stream.zalloc = zalloc; + d_stream.zfree = zfree; + d_stream.opaque = (voidpf)0; + + d_stream.next_in = compr; + d_stream.avail_in = (uInt)comprLen; + + err = inflateInit(&d_stream); + CHECK_ERR(err, "inflateInit"); + + d_stream.next_out = uncompr; + d_stream.avail_out = (uInt)uncomprLen; + + for (;;) { + err = inflate(&d_stream, Z_NO_FLUSH); + if (err == Z_STREAM_END) break; + if (err == Z_NEED_DICT) { + if (d_stream.adler != dictId) { + fprintf(stderr, "unexpected dictionary"); + exit(1); + } + err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary, + (int)sizeof(dictionary)); + } + CHECK_ERR(err, "inflate with dict"); + } + + err = inflateEnd(&d_stream); + CHECK_ERR(err, "inflateEnd"); + + if (strcmp((char*)uncompr, hello)) { + fprintf(stderr, "bad inflate with dict\n"); + exit(1); + } else { + printf("inflate with dictionary: %s\n", (char *)uncompr); + } +} + +/* =========================================================================== + * Usage: example [output.gz [input.gz]] + */ + +int main(argc, argv) + int argc; + char *argv[]; +{ + Byte *compr, *uncompr; + uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */ + uLong uncomprLen = comprLen; + static const char* myVersion = ZLIB_VERSION; + + if (zlibVersion()[0] != myVersion[0]) { + fprintf(stderr, "incompatible zlib version\n"); + exit(1); + + } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) { + fprintf(stderr, "warning: different zlib version\n"); + } + + printf("zlib version %s = 0x%04x, compile flags = 0x%lx\n", + ZLIB_VERSION, ZLIB_VERNUM, zlibCompileFlags()); + + compr = (Byte*)calloc((uInt)comprLen, 1); + uncompr = (Byte*)calloc((uInt)uncomprLen, 1); + /* compr and uncompr are cleared to avoid reading uninitialized + * data and to ensure that uncompr compresses well. + */ + if (compr == Z_NULL || uncompr == Z_NULL) { + printf("out of memory\n"); + exit(1); + } + +#ifdef Z_SOLO + argc = strlen(argv[0]); +#else + test_compress(compr, comprLen, uncompr, uncomprLen); + + test_gzio((argc > 1 ? argv[1] : TESTFILE), + uncompr, uncomprLen); +#endif + + test_deflate(compr, comprLen); + test_inflate(compr, comprLen, uncompr, uncomprLen); + + test_large_deflate(compr, comprLen, uncompr, uncomprLen); + test_large_inflate(compr, comprLen, uncompr, uncomprLen); + + test_flush(compr, &comprLen); + test_sync(compr, comprLen, uncompr, uncomprLen); + comprLen = uncomprLen; + + test_dict_deflate(compr, comprLen); + test_dict_inflate(compr, comprLen, uncompr, uncomprLen); + + free(compr); + free(uncompr); + + return 0; +} diff --git a/src/zstd/zlibWrapper/examples/fitblk.c b/src/zstd/zlibWrapper/examples/fitblk.c new file mode 100644 index 000000000..669b176eb --- /dev/null +++ b/src/zstd/zlibWrapper/examples/fitblk.c @@ -0,0 +1,254 @@ +/* fitblk.c contains minimal changes required to be compiled with zlibWrapper: + * - #include "zlib.h" was changed to #include "zstd_zlibwrapper.h" + * - writing block to stdout was disabled */ + +/* fitblk.c: example of fitting compressed output to a specified size + Not copyrighted -- provided to the public domain + Version 1.1 25 November 2004 Mark Adler */ + +/* Version history: + 1.0 24 Nov 2004 First version + 1.1 25 Nov 2004 Change deflateInit2() to deflateInit() + Use fixed-size, stack-allocated raw buffers + Simplify code moving compression to subroutines + Use assert() for internal errors + Add detailed description of approach + */ + +/* Approach to just fitting a requested compressed size: + + fitblk performs three compression passes on a portion of the input + data in order to determine how much of that input will compress to + nearly the requested output block size. The first pass generates + enough deflate blocks to produce output to fill the requested + output size plus a specified excess amount (see the EXCESS define + below). The last deflate block may go quite a bit past that, but + is discarded. The second pass decompresses and recompresses just + the compressed data that fit in the requested plus excess sized + buffer. The deflate process is terminated after that amount of + input, which is less than the amount consumed on the first pass. + The last deflate block of the result will be of a comparable size + to the final product, so that the header for that deflate block and + the compression ratio for that block will be about the same as in + the final product. The third compression pass decompresses the + result of the second step, but only the compressed data up to the + requested size minus an amount to allow the compressed stream to + complete (see the MARGIN define below). That will result in a + final compressed stream whose length is less than or equal to the + requested size. Assuming sufficient input and a requested size + greater than a few hundred bytes, the shortfall will typically be + less than ten bytes. + + If the input is short enough that the first compression completes + before filling the requested output size, then that compressed + stream is return with no recompression. + + EXCESS is chosen to be just greater than the shortfall seen in a + two pass approach similar to the above. That shortfall is due to + the last deflate block compressing more efficiently with a smaller + header on the second pass. EXCESS is set to be large enough so + that there is enough uncompressed data for the second pass to fill + out the requested size, and small enough so that the final deflate + block of the second pass will be close in size to the final deflate + block of the third and final pass. MARGIN is chosen to be just + large enough to assure that the final compression has enough room + to complete in all cases. + */ + +#include +#include +#include +#include "zstd_zlibwrapper.h" + +#define LOG_FITBLK(...) /*printf(__VA_ARGS__)*/ +#define local static + +/* print nastygram and leave */ +local void quit(char *why) +{ + fprintf(stderr, "fitblk abort: %s\n", why); + exit(1); +} + +#define RAWLEN 4096 /* intermediate uncompressed buffer size */ + +/* compress from file to def until provided buffer is full or end of + input reached; return last deflate() return value, or Z_ERRNO if + there was read error on the file */ +local int partcompress(FILE *in, z_streamp def) +{ + int ret, flush; + unsigned char raw[RAWLEN]; + + flush = Z_SYNC_FLUSH; + do { + def->avail_in = (uInt)fread(raw, 1, RAWLEN, in); + if (ferror(in)) + return Z_ERRNO; + def->next_in = raw; + if (feof(in)) + flush = Z_FINISH; + LOG_FITBLK("partcompress1 avail_in=%d total_in=%d avail_out=%d total_out=%d\n", (int)def->avail_in, (int)def->total_in, (int)def->avail_out, (int)def->total_out); + ret = deflate(def, flush); + LOG_FITBLK("partcompress2 ret=%d avail_in=%d total_in=%d avail_out=%d total_out=%d\n", ret, (int)def->avail_in, (int)def->total_in, (int)def->avail_out, (int)def->total_out); + assert(ret != Z_STREAM_ERROR); + } while (def->avail_out != 0 && flush == Z_SYNC_FLUSH); + return ret; +} + +/* recompress from inf's input to def's output; the input for inf and + the output for def are set in those structures before calling; + return last deflate() return value, or Z_MEM_ERROR if inflate() + was not able to allocate enough memory when it needed to */ +local int recompress(z_streamp inf, z_streamp def) +{ + int ret, flush; + unsigned char raw[RAWLEN]; + + flush = Z_NO_FLUSH; + LOG_FITBLK("recompress start\n"); + do { + /* decompress */ + inf->avail_out = RAWLEN; + inf->next_out = raw; + LOG_FITBLK("recompress1inflate avail_in=%d total_in=%d avail_out=%d total_out=%d\n", (int)inf->avail_in, (int)inf->total_in, (int)inf->avail_out, (int)inf->total_out); + ret = inflate(inf, Z_NO_FLUSH); + LOG_FITBLK("recompress2inflate avail_in=%d total_in=%d avail_out=%d total_out=%d\n", (int)inf->avail_in, (int)inf->total_in, (int)inf->avail_out, (int)inf->total_out); + assert(ret != Z_STREAM_ERROR && ret != Z_DATA_ERROR && + ret != Z_NEED_DICT); + if (ret == Z_MEM_ERROR) + return ret; + + /* compress what was decompresed until done or no room */ + def->avail_in = RAWLEN - inf->avail_out; + def->next_in = raw; + if (inf->avail_out != 0) + flush = Z_FINISH; + LOG_FITBLK("recompress1deflate avail_in=%d total_in=%d avail_out=%d total_out=%d\n", (int)def->avail_in, (int)def->total_in, (int)def->avail_out, (int)def->total_out); + ret = deflate(def, flush); + LOG_FITBLK("recompress2deflate ret=%d avail_in=%d total_in=%d avail_out=%d total_out=%d\n", ret, (int)def->avail_in, (int)def->total_in, (int)def->avail_out, (int)def->total_out); + assert(ret != Z_STREAM_ERROR); + } while (ret != Z_STREAM_END && def->avail_out != 0); + return ret; +} + +#define EXCESS 256 /* empirically determined stream overage */ +#define MARGIN 8 /* amount to back off for completion */ + +/* compress from stdin to fixed-size block on stdout */ +int main(int argc, char **argv) +{ + int ret; /* return code */ + unsigned size; /* requested fixed output block size */ + unsigned have; /* bytes written by deflate() call */ + unsigned char *blk; /* intermediate and final stream */ + unsigned char *tmp; /* close to desired size stream */ + z_stream def, inf; /* zlib deflate and inflate states */ + + /* get requested output size */ + if (argc != 2) + quit("need one argument: size of output block"); + ret = (int)strtol(argv[1], argv + 1, 10); + if (argv[1][0] != 0) + quit("argument must be a number"); + if (ret < 8) /* 8 is minimum zlib stream size */ + quit("need positive size of 8 or greater"); + size = (unsigned)ret; + + printf("zlib version %s\n", ZLIB_VERSION); + if (ZWRAP_isUsingZSTDcompression()) printf("zstd version %s\n", zstdVersion()); + + /* allocate memory for buffers and compression engine */ + blk = (unsigned char*)malloc(size + EXCESS); + def.zalloc = Z_NULL; + def.zfree = Z_NULL; + def.opaque = Z_NULL; + ret = deflateInit(&def, Z_DEFAULT_COMPRESSION); + if (ret != Z_OK || blk == NULL) + quit("out of memory"); + + /* compress from stdin until output full, or no more input */ + def.avail_out = size + EXCESS; + def.next_out = blk; + LOG_FITBLK("partcompress1 total_in=%d total_out=%d\n", (int)def.total_in, (int)def.total_out); + ret = partcompress(stdin, &def); + printf("partcompress total_in=%d total_out=%d\n", (int)def.total_in, (int)def.total_out); + if (ret == Z_ERRNO) + quit("error reading input"); + + /* if it all fit, then size was undersubscribed -- done! */ + if (ret == Z_STREAM_END && def.avail_out >= EXCESS) { + /* write block to stdout */ + have = size + EXCESS - def.avail_out; + /* if (fwrite(blk, 1, have, stdout) != have || ferror(stdout)) + * quit("error writing output"); */ + + /* clean up and print results to stderr */ + ret = deflateEnd(&def); + assert(ret != Z_STREAM_ERROR); + free(blk); + fprintf(stderr, + "%u bytes unused out of %u requested (all input)\n", + size - have, size); + return 0; + } + + /* it didn't all fit -- set up for recompression */ + inf.zalloc = Z_NULL; + inf.zfree = Z_NULL; + inf.opaque = Z_NULL; + inf.avail_in = 0; + inf.next_in = Z_NULL; + ret = inflateInit(&inf); + tmp = (unsigned char*)malloc(size + EXCESS); + if (ret != Z_OK || tmp == NULL) + quit("out of memory"); + ret = deflateReset(&def); + assert(ret != Z_STREAM_ERROR); + + /* do first recompression close to the right amount */ + inf.avail_in = size + EXCESS; + inf.next_in = blk; + def.avail_out = size + EXCESS; + def.next_out = tmp; + LOG_FITBLK("recompress1 inf.total_in=%d def.total_out=%d\n", (int)inf.total_in, (int)def.total_out); + ret = recompress(&inf, &def); + LOG_FITBLK("recompress1 inf.total_in=%d def.total_out=%d\n", (int)inf.total_in, (int)def.total_out); + if (ret == Z_MEM_ERROR) + quit("out of memory"); + + /* set up for next recompression */ + ret = inflateReset(&inf); + assert(ret != Z_STREAM_ERROR); + ret = deflateReset(&def); + assert(ret != Z_STREAM_ERROR); + + /* do second and final recompression (third compression) */ + inf.avail_in = size - MARGIN; /* assure stream will complete */ + inf.next_in = tmp; + def.avail_out = size; + def.next_out = blk; + LOG_FITBLK("recompress2 inf.total_in=%d def.total_out=%d\n", (int)inf.total_in, (int)def.total_out); + ret = recompress(&inf, &def); + LOG_FITBLK("recompress2 inf.total_in=%d def.total_out=%d\n", (int)inf.total_in, (int)def.total_out); + if (ret == Z_MEM_ERROR) + quit("out of memory"); + assert(ret == Z_STREAM_END); /* otherwise MARGIN too small */ + + /* done -- write block to stdout */ + have = size - def.avail_out; + /* if (fwrite(blk, 1, have, stdout) != have || ferror(stdout)) + * quit("error writing output"); */ + + /* clean up and print results to stderr */ + free(tmp); + ret = inflateEnd(&inf); + assert(ret != Z_STREAM_ERROR); + ret = deflateEnd(&def); + assert(ret != Z_STREAM_ERROR); + free(blk); + fprintf(stderr, + "%u bytes unused out of %u requested (%lu input)\n", + size - have, size, def.total_in); + return 0; +} diff --git a/src/zstd/zlibWrapper/examples/fitblk_original.c b/src/zstd/zlibWrapper/examples/fitblk_original.c new file mode 100644 index 000000000..20f351bfa --- /dev/null +++ b/src/zstd/zlibWrapper/examples/fitblk_original.c @@ -0,0 +1,233 @@ +/* fitblk.c: example of fitting compressed output to a specified size + Not copyrighted -- provided to the public domain + Version 1.1 25 November 2004 Mark Adler */ + +/* Version history: + 1.0 24 Nov 2004 First version + 1.1 25 Nov 2004 Change deflateInit2() to deflateInit() + Use fixed-size, stack-allocated raw buffers + Simplify code moving compression to subroutines + Use assert() for internal errors + Add detailed description of approach + */ + +/* Approach to just fitting a requested compressed size: + + fitblk performs three compression passes on a portion of the input + data in order to determine how much of that input will compress to + nearly the requested output block size. The first pass generates + enough deflate blocks to produce output to fill the requested + output size plus a specified excess amount (see the EXCESS define + below). The last deflate block may go quite a bit past that, but + is discarded. The second pass decompresses and recompresses just + the compressed data that fit in the requested plus excess sized + buffer. The deflate process is terminated after that amount of + input, which is less than the amount consumed on the first pass. + The last deflate block of the result will be of a comparable size + to the final product, so that the header for that deflate block and + the compression ratio for that block will be about the same as in + the final product. The third compression pass decompresses the + result of the second step, but only the compressed data up to the + requested size minus an amount to allow the compressed stream to + complete (see the MARGIN define below). That will result in a + final compressed stream whose length is less than or equal to the + requested size. Assuming sufficient input and a requested size + greater than a few hundred bytes, the shortfall will typically be + less than ten bytes. + + If the input is short enough that the first compression completes + before filling the requested output size, then that compressed + stream is return with no recompression. + + EXCESS is chosen to be just greater than the shortfall seen in a + two pass approach similar to the above. That shortfall is due to + the last deflate block compressing more efficiently with a smaller + header on the second pass. EXCESS is set to be large enough so + that there is enough uncompressed data for the second pass to fill + out the requested size, and small enough so that the final deflate + block of the second pass will be close in size to the final deflate + block of the third and final pass. MARGIN is chosen to be just + large enough to assure that the final compression has enough room + to complete in all cases. + */ + +#include +#include +#include +#include "zlib.h" + +#define local static + +/* print nastygram and leave */ +local void quit(char *why) +{ + fprintf(stderr, "fitblk abort: %s\n", why); + exit(1); +} + +#define RAWLEN 4096 /* intermediate uncompressed buffer size */ + +/* compress from file to def until provided buffer is full or end of + input reached; return last deflate() return value, or Z_ERRNO if + there was read error on the file */ +local int partcompress(FILE *in, z_streamp def) +{ + int ret, flush; + unsigned char raw[RAWLEN]; + + flush = Z_NO_FLUSH; + do { + def->avail_in = fread(raw, 1, RAWLEN, in); + if (ferror(in)) + return Z_ERRNO; + def->next_in = raw; + if (feof(in)) + flush = Z_FINISH; + ret = deflate(def, flush); + assert(ret != Z_STREAM_ERROR); + } while (def->avail_out != 0 && flush == Z_NO_FLUSH); + return ret; +} + +/* recompress from inf's input to def's output; the input for inf and + the output for def are set in those structures before calling; + return last deflate() return value, or Z_MEM_ERROR if inflate() + was not able to allocate enough memory when it needed to */ +local int recompress(z_streamp inf, z_streamp def) +{ + int ret, flush; + unsigned char raw[RAWLEN]; + + flush = Z_NO_FLUSH; + do { + /* decompress */ + inf->avail_out = RAWLEN; + inf->next_out = raw; + ret = inflate(inf, Z_NO_FLUSH); + assert(ret != Z_STREAM_ERROR && ret != Z_DATA_ERROR && + ret != Z_NEED_DICT); + if (ret == Z_MEM_ERROR) + return ret; + + /* compress what was decompresed until done or no room */ + def->avail_in = RAWLEN - inf->avail_out; + def->next_in = raw; + if (inf->avail_out != 0) + flush = Z_FINISH; + ret = deflate(def, flush); + assert(ret != Z_STREAM_ERROR); + } while (ret != Z_STREAM_END && def->avail_out != 0); + return ret; +} + +#define EXCESS 256 /* empirically determined stream overage */ +#define MARGIN 8 /* amount to back off for completion */ + +/* compress from stdin to fixed-size block on stdout */ +int main(int argc, char **argv) +{ + int ret; /* return code */ + unsigned size; /* requested fixed output block size */ + unsigned have; /* bytes written by deflate() call */ + unsigned char *blk; /* intermediate and final stream */ + unsigned char *tmp; /* close to desired size stream */ + z_stream def, inf; /* zlib deflate and inflate states */ + + /* get requested output size */ + if (argc != 2) + quit("need one argument: size of output block"); + ret = strtol(argv[1], argv + 1, 10); + if (argv[1][0] != 0) + quit("argument must be a number"); + if (ret < 8) /* 8 is minimum zlib stream size */ + quit("need positive size of 8 or greater"); + size = (unsigned)ret; + + /* allocate memory for buffers and compression engine */ + blk = malloc(size + EXCESS); + def.zalloc = Z_NULL; + def.zfree = Z_NULL; + def.opaque = Z_NULL; + ret = deflateInit(&def, Z_DEFAULT_COMPRESSION); + if (ret != Z_OK || blk == NULL) + quit("out of memory"); + + /* compress from stdin until output full, or no more input */ + def.avail_out = size + EXCESS; + def.next_out = blk; + ret = partcompress(stdin, &def); + if (ret == Z_ERRNO) + quit("error reading input"); + + /* if it all fit, then size was undersubscribed -- done! */ + if (ret == Z_STREAM_END && def.avail_out >= EXCESS) { + /* write block to stdout */ + have = size + EXCESS - def.avail_out; + if (fwrite(blk, 1, have, stdout) != have || ferror(stdout)) + quit("error writing output"); + + /* clean up and print results to stderr */ + ret = deflateEnd(&def); + assert(ret != Z_STREAM_ERROR); + free(blk); + fprintf(stderr, + "%u bytes unused out of %u requested (all input)\n", + size - have, size); + return 0; + } + + /* it didn't all fit -- set up for recompression */ + inf.zalloc = Z_NULL; + inf.zfree = Z_NULL; + inf.opaque = Z_NULL; + inf.avail_in = 0; + inf.next_in = Z_NULL; + ret = inflateInit(&inf); + tmp = malloc(size + EXCESS); + if (ret != Z_OK || tmp == NULL) + quit("out of memory"); + ret = deflateReset(&def); + assert(ret != Z_STREAM_ERROR); + + /* do first recompression close to the right amount */ + inf.avail_in = size + EXCESS; + inf.next_in = blk; + def.avail_out = size + EXCESS; + def.next_out = tmp; + ret = recompress(&inf, &def); + if (ret == Z_MEM_ERROR) + quit("out of memory"); + + /* set up for next recompression */ + ret = inflateReset(&inf); + assert(ret != Z_STREAM_ERROR); + ret = deflateReset(&def); + assert(ret != Z_STREAM_ERROR); + + /* do second and final recompression (third compression) */ + inf.avail_in = size - MARGIN; /* assure stream will complete */ + inf.next_in = tmp; + def.avail_out = size; + def.next_out = blk; + ret = recompress(&inf, &def); + if (ret == Z_MEM_ERROR) + quit("out of memory"); + assert(ret == Z_STREAM_END); /* otherwise MARGIN too small */ + + /* done -- write block to stdout */ + have = size - def.avail_out; + if (fwrite(blk, 1, have, stdout) != have || ferror(stdout)) + quit("error writing output"); + + /* clean up and print results to stderr */ + free(tmp); + ret = inflateEnd(&inf); + assert(ret != Z_STREAM_ERROR); + ret = deflateEnd(&def); + assert(ret != Z_STREAM_ERROR); + free(blk); + fprintf(stderr, + "%u bytes unused out of %u requested (%lu input)\n", + size - have, size, def.total_in); + return 0; +} diff --git a/src/zstd/zlibWrapper/examples/minigzip.c b/src/zstd/zlibWrapper/examples/minigzip.c new file mode 100644 index 000000000..f67be0956 --- /dev/null +++ b/src/zstd/zlibWrapper/examples/minigzip.c @@ -0,0 +1,640 @@ +/* minigzip.c contains minimal changes required to be compiled with zlibWrapper: + * - #include "zlib.h" was changed to #include "zstd_zlibwrapper.h" */ + +/* minigzip.c -- simulate gzip using the zlib compression library + * Copyright (C) 1995-2006, 2010, 2011 Jean-loup Gailly. + * For conditions of distribution and use, see http://www.zlib.net/zlib_license.html + */ + +/* + * minigzip is a minimal implementation of the gzip utility. This is + * only an example of using zlib and isn't meant to replace the + * full-featured gzip. No attempt is made to deal with file systems + * limiting names to 14 or 8+3 characters, etc... Error checking is + * very limited. So use minigzip only for testing; use gzip for the + * real thing. On MSDOS, use only on file names without extension + * or in pipe mode. + */ + +/* @(#) $Id$ */ + +#define _POSIX_SOURCE /* fileno */ + +#include "zstd_zlibwrapper.h" +#include + +#ifdef STDC +# include +# include +#endif + +#ifdef USE_MMAP +# include +# include +# include +#endif + +#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__) +# include +# include +# ifdef UNDER_CE +# include +# endif +# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY) +#else +# define SET_BINARY_MODE(file) +#endif + +#ifdef _MSC_VER +# define snprintf _snprintf +#endif + +#ifdef VMS +# define unlink delete +# define GZ_SUFFIX "-gz" +#endif +#ifdef RISCOS +# define unlink remove +# define GZ_SUFFIX "-gz" +# define fileno(file) file->__file +#endif +#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os +# include /* for fileno */ +#endif + +#if !defined(Z_HAVE_UNISTD_H) && !defined(_LARGEFILE64_SOURCE) +#ifndef WIN32 /* unlink already in stdio.h for WIN32 */ + extern int unlink OF((const char *)); +#endif +#endif + +#if defined(UNDER_CE) +# include +# define perror(s) pwinerror(s) + +/* Map the Windows error number in ERROR to a locale-dependent error + message string and return a pointer to it. Typically, the values + for ERROR come from GetLastError. + + The string pointed to shall not be modified by the application, + but may be overwritten by a subsequent call to strwinerror + + The strwinerror function does not change the current setting + of GetLastError. */ + +static char *strwinerror (error) + DWORD error; +{ + static char buf[1024]; + + wchar_t *msgbuf; + DWORD lasterr = GetLastError(); + DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM + | FORMAT_MESSAGE_ALLOCATE_BUFFER, + NULL, + error, + 0, /* Default language */ + (LPVOID)&msgbuf, + 0, + NULL); + if (chars != 0) { + /* If there is an \r\n appended, zap it. */ + if (chars >= 2 + && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') { + chars -= 2; + msgbuf[chars] = 0; + } + + if (chars > sizeof (buf) - 1) { + chars = sizeof (buf) - 1; + msgbuf[chars] = 0; + } + + wcstombs(buf, msgbuf, chars + 1); + LocalFree(msgbuf); + } + else { + sprintf(buf, "unknown win32 error (%ld)", error); + } + + SetLastError(lasterr); + return buf; +} + +static void pwinerror (s) + const char *s; +{ + if (s && *s) + fprintf(stderr, "%s: %s\n", s, strwinerror(GetLastError ())); + else + fprintf(stderr, "%s\n", strwinerror(GetLastError ())); +} + +#endif /* UNDER_CE */ + +#ifndef GZ_SUFFIX +# define GZ_SUFFIX ".gz" +#endif +#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1) + +#define BUFLEN 16384 +#define MAX_NAME_LEN 1024 + +#ifdef MAXSEG_64K +# define local static + /* Needed for systems with limitation on stack size. */ +#else +# define local +#endif + +#ifdef Z_SOLO +/* for Z_SOLO, create simplified gz* functions using deflate and inflate */ + +#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE) +# include /* for unlink() */ +#endif + +void *myalloc OF((void *, unsigned, unsigned)); +void myfree OF((void *, void *)); + +void *myalloc(q, n, m) + void *q; + unsigned n, m; +{ + q = Z_NULL; + return calloc(n, m); +} + +void myfree(q, p) + void *q, *p; +{ + q = Z_NULL; + free(p); +} + +typedef struct gzFile_s { + FILE *file; + int write; + int err; + char *msg; + z_stream strm; +} *gzFile; + +gzFile gzopen OF((const char *, const char *)); +gzFile gzdopen OF((int, const char *)); +gzFile gz_open OF((const char *, int, const char *)); + +gzFile gzopen(path, mode) +const char *path; +const char *mode; +{ + return gz_open(path, -1, mode); +} + +gzFile gzdopen(fd, mode) +int fd; +const char *mode; +{ + return gz_open(NULL, fd, mode); +} + +gzFile gz_open(path, fd, mode) + const char *path; + int fd; + const char *mode; +{ + gzFile gz; + int ret; + + gz = malloc(sizeof(struct gzFile_s)); + if (gz == NULL) + return NULL; + gz->write = strchr(mode, 'w') != NULL; + gz->strm.zalloc = myalloc; + gz->strm.zfree = myfree; + gz->strm.opaque = Z_NULL; + if (gz->write) + ret = deflateInit2(&(gz->strm), -1, 8, 15 + 16, 8, 0); + else { + gz->strm.next_in = 0; + gz->strm.avail_in = Z_NULL; + ret = inflateInit2(&(gz->strm), 15 + 16); + } + if (ret != Z_OK) { + free(gz); + return NULL; + } + gz->file = path == NULL ? fdopen(fd, gz->write ? "wb" : "rb") : + fopen(path, gz->write ? "wb" : "rb"); + if (gz->file == NULL) { + gz->write ? deflateEnd(&(gz->strm)) : inflateEnd(&(gz->strm)); + free(gz); + return NULL; + } + gz->err = 0; + gz->msg = ""; + return gz; +} + +int gzwrite OF((gzFile, const void *, unsigned)); + +int gzwrite(gz, buf, len) + gzFile gz; + const void *buf; + unsigned len; +{ + z_stream *strm; + unsigned char out[BUFLEN]; + + if (gz == NULL || !gz->write) + return 0; + strm = &(gz->strm); + strm->next_in = (void *)buf; + strm->avail_in = len; + do { + strm->next_out = out; + strm->avail_out = BUFLEN; + (void)deflate(strm, Z_NO_FLUSH); + fwrite(out, 1, BUFLEN - strm->avail_out, gz->file); + } while (strm->avail_out == 0); + return len; +} + +int gzread OF((gzFile, void *, unsigned)); + +int gzread(gz, buf, len) + gzFile gz; + void *buf; + unsigned len; +{ + int ret; + unsigned got; + unsigned char in[1]; + z_stream *strm; + + if (gz == NULL || gz->write) + return 0; + if (gz->err) + return 0; + strm = &(gz->strm); + strm->next_out = (void *)buf; + strm->avail_out = len; + do { + got = fread(in, 1, 1, gz->file); + if (got == 0) + break; + strm->next_in = in; + strm->avail_in = 1; + ret = inflate(strm, Z_NO_FLUSH); + if (ret == Z_DATA_ERROR) { + gz->err = Z_DATA_ERROR; + gz->msg = strm->msg; + return 0; + } + if (ret == Z_STREAM_END) + inflateReset(strm); + } while (strm->avail_out); + return len - strm->avail_out; +} + +int gzclose OF((gzFile)); + +int gzclose(gz) + gzFile gz; +{ + z_stream *strm; + unsigned char out[BUFLEN]; + + if (gz == NULL) + return Z_STREAM_ERROR; + strm = &(gz->strm); + if (gz->write) { + strm->next_in = Z_NULL; + strm->avail_in = 0; + do { + strm->next_out = out; + strm->avail_out = BUFLEN; + (void)deflate(strm, Z_FINISH); + fwrite(out, 1, BUFLEN - strm->avail_out, gz->file); + } while (strm->avail_out == 0); + deflateEnd(strm); + } + else + inflateEnd(strm); + fclose(gz->file); + free(gz); + return Z_OK; +} + +const char *gzerror OF((gzFile, int *)); + +const char *gzerror(gz, err) + gzFile gz; + int *err; +{ + *err = gz->err; + return gz->msg; +} + +#endif + +char *prog; + +void error OF((const char *msg)); +void gz_compress OF((FILE *in, gzFile out)); +#ifdef USE_MMAP +int gz_compress_mmap OF((FILE *in, gzFile out)); +#endif +void gz_uncompress OF((gzFile in, FILE *out)); +void file_compress OF((char *file, char *mode)); +void file_uncompress OF((char *file)); +int main OF((int argc, char *argv[])); + +/* =========================================================================== + * Display error message and exit + */ +void error(msg) + const char *msg; +{ + fprintf(stderr, "%s: %s\n", prog, msg); + exit(1); +} + +/* =========================================================================== + * Compress input to output then close both files. + */ + +void gz_compress(in, out) + FILE *in; + gzFile out; +{ + local char buf[BUFLEN]; + int len; + int err; + +#ifdef USE_MMAP + /* Try first compressing with mmap. If mmap fails (minigzip used in a + * pipe), use the normal fread loop. + */ + if (gz_compress_mmap(in, out) == Z_OK) return; +#endif + for (;;) { + len = (int)fread(buf, 1, sizeof(buf), in); + if (ferror(in)) { + perror("fread"); + exit(1); + } + if (len == 0) break; + + if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err)); + } + fclose(in); + if (gzclose(out) != Z_OK) error("failed gzclose"); +} + +#ifdef USE_MMAP /* MMAP version, Miguel Albrecht */ + +/* Try compressing the input file at once using mmap. Return Z_OK if + * if success, Z_ERRNO otherwise. + */ +int gz_compress_mmap(in, out) + FILE *in; + gzFile out; +{ + int len; + int err; + int ifd = fileno(in); + caddr_t buf; /* mmap'ed buffer for the entire input file */ + off_t buf_len; /* length of the input file */ + struct stat sb; + + /* Determine the size of the file, needed for mmap: */ + if (fstat(ifd, &sb) < 0) return Z_ERRNO; + buf_len = sb.st_size; + if (buf_len <= 0) return Z_ERRNO; + + /* Now do the actual mmap: */ + buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0); + if (buf == (caddr_t)(-1)) return Z_ERRNO; + + /* Compress the whole file at once: */ + len = gzwrite(out, (char *)buf, (unsigned)buf_len); + + if (len != (int)buf_len) error(gzerror(out, &err)); + + munmap(buf, buf_len); + fclose(in); + if (gzclose(out) != Z_OK) error("failed gzclose"); + return Z_OK; +} +#endif /* USE_MMAP */ + +/* =========================================================================== + * Uncompress input to output then close both files. + */ +void gz_uncompress(in, out) + gzFile in; + FILE *out; +{ + local char buf[BUFLEN]; + int len; + int err; + + for (;;) { + len = gzread(in, buf, sizeof(buf)); + if (len < 0) error (gzerror(in, &err)); + if (len == 0) break; + + if ((int)fwrite(buf, 1, (unsigned)len, out) != len) { + error("failed fwrite"); + } + } + if (fclose(out)) error("failed fclose"); + + if (gzclose(in) != Z_OK) error("failed gzclose"); +} + + +/* =========================================================================== + * Compress the given file: create a corresponding .gz file and remove the + * original. + */ +void file_compress(file, mode) + char *file; + char *mode; +{ + local char outfile[MAX_NAME_LEN]; + FILE *in; + gzFile out; + + if (strlen(file) + strlen(GZ_SUFFIX) >= sizeof(outfile)) { + fprintf(stderr, "%s: filename too long\n", prog); + exit(1); + } + + strcpy(outfile, file); + strcat(outfile, GZ_SUFFIX); + + in = fopen(file, "rb"); + if (in == NULL) { + perror(file); + exit(1); + } + out = gzopen(outfile, mode); + if (out == NULL) { + fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile); + exit(1); + } + gz_compress(in, out); + + unlink(file); +} + + +/* =========================================================================== + * Uncompress the given file and remove the original. + */ +void file_uncompress(file) + char *file; +{ + local char buf[MAX_NAME_LEN]; + char *infile, *outfile; + FILE *out; + gzFile in; + size_t len = strlen(file); + + if (len + strlen(GZ_SUFFIX) >= sizeof(buf)) { + fprintf(stderr, "%s: filename too long\n", prog); + exit(1); + } + + strcpy(buf, file); + + if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) { + infile = file; + outfile = buf; + outfile[len-3] = '\0'; + } else { + outfile = file; + infile = buf; + strcat(infile, GZ_SUFFIX); + } + in = gzopen(infile, "rb"); + if (in == NULL) { + fprintf(stderr, "%s: can't gzopen %s\n", prog, infile); + exit(1); + } + out = fopen(outfile, "wb"); + if (out == NULL) { + perror(file); + exit(1); + } + + gz_uncompress(in, out); + + unlink(infile); +} + + +/* =========================================================================== + * Usage: minigzip [-c] [-d] [-f] [-h] [-r] [-1 to -9] [files...] + * -c : write to standard output + * -d : decompress + * -f : compress with Z_FILTERED + * -h : compress with Z_HUFFMAN_ONLY + * -r : compress with Z_RLE + * -1 to -9 : compression level + */ + +int main(argc, argv) + int argc; + char *argv[]; +{ + int copyout = 0; + int uncompr = 0; + gzFile file; + char *bname, outmode[20]; + + strcpy(outmode, "wb6 "); + + prog = argv[0]; + bname = strrchr(argv[0], '/'); + if (bname) + bname++; + else + bname = argv[0]; + argc--, argv++; + + if (!strcmp(bname, "gunzip")) + uncompr = 1; + else if (!strcmp(bname, "zcat")) + copyout = uncompr = 1; + + while (argc > 0) { + if (strcmp(*argv, "-c") == 0) + copyout = 1; + else if (strcmp(*argv, "-d") == 0) + uncompr = 1; + else if (strcmp(*argv, "-f") == 0) + outmode[3] = 'f'; + else if (strcmp(*argv, "-h") == 0) + outmode[3] = 'h'; + else if (strcmp(*argv, "-r") == 0) + outmode[3] = 'R'; + else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' && + (*argv)[2] == 0) + outmode[2] = (*argv)[1]; + else + break; + argc--, argv++; + } + if (outmode[3] == ' ') + outmode[3] = 0; + if (argc == 0) { + SET_BINARY_MODE(stdin); + SET_BINARY_MODE(stdout); + if (uncompr) { + file = gzdopen(fileno(stdin), "rb"); + if (file == NULL) error("can't gzdopen stdin"); + gz_uncompress(file, stdout); + } else { + file = gzdopen(fileno(stdout), outmode); + if (file == NULL) error("can't gzdopen stdout"); + gz_compress(stdin, file); + } + } else { + if (copyout) { + SET_BINARY_MODE(stdout); + } + do { + if (uncompr) { + if (copyout) { + file = gzopen(*argv, "rb"); + if (file == NULL) + fprintf(stderr, "%s: can't gzopen %s\n", prog, *argv); + else + gz_uncompress(file, stdout); + } else { + file_uncompress(*argv); + } + } else { + if (copyout) { + FILE * in = fopen(*argv, "rb"); + + if (in == NULL) { + perror(*argv); + } else { + file = gzdopen(fileno(stdout), outmode); + if (file == NULL) error("can't gzdopen stdout"); + + gz_compress(in, file); + } + + } else { + file_compress(*argv, outmode); + } + } + } while (argv++, --argc); + } + return 0; +} diff --git a/src/zstd/zlibWrapper/examples/zwrapbench.c b/src/zstd/zlibWrapper/examples/zwrapbench.c new file mode 100644 index 000000000..f30cad40c --- /dev/null +++ b/src/zstd/zlibWrapper/examples/zwrapbench.c @@ -0,0 +1,1001 @@ +/* + * Copyright (c) 2016-present, Przemyslaw Skibinski, Yann Collet, Facebook, Inc. + * All rights reserved. + * + * This source code is licensed under both the BSD-style license (found in the + * LICENSE file in the root directory of this source tree) and the GPLv2 (found + * in the COPYING file in the root directory of this source tree). + */ + + +/* ************************************* +* Includes +***************************************/ +#include "util.h" /* Compiler options, UTIL_GetFileSize, UTIL_sleep */ +#include /* malloc, free */ +#include /* memset */ +#include /* fprintf, fopen, ftello64 */ +#include /* clock_t, clock, CLOCKS_PER_SEC */ +#include /* toupper */ +#include /* errno */ + +#include "timefn.h" /* UTIL_time_t, UTIL_getTime, UTIL_clockSpanMicro, UTIL_waitForNextTick */ +#include "mem.h" +#define ZSTD_STATIC_LINKING_ONLY +#include "zstd.h" +#include "datagen.h" /* RDG_genBuffer */ +#include "xxhash.h" + +#include "zstd_zlibwrapper.h" + + + +/*-************************************ +* Tuning parameters +**************************************/ +#ifndef ZSTDCLI_CLEVEL_DEFAULT +# define ZSTDCLI_CLEVEL_DEFAULT 3 +#endif + + +/*-************************************ +* Constants +**************************************/ +#define COMPRESSOR_NAME "Zstandard wrapper for zlib command line interface" +#ifndef ZSTD_VERSION +# define ZSTD_VERSION "v" ZSTD_VERSION_STRING +#endif +#define AUTHOR "Yann Collet" +#define WELCOME_MESSAGE "*** %s %i-bits %s, by %s ***\n", COMPRESSOR_NAME, (int)(sizeof(size_t)*8), ZSTD_VERSION, AUTHOR + +#ifndef ZSTD_GIT_COMMIT +# define ZSTD_GIT_COMMIT_STRING "" +#else +# define ZSTD_GIT_COMMIT_STRING ZSTD_EXPAND_AND_QUOTE(ZSTD_GIT_COMMIT) +#endif + +#define NBLOOPS 3 +#define TIMELOOP_MICROSEC 1*1000000ULL /* 1 second */ +#define ACTIVEPERIOD_MICROSEC 70*1000000ULL /* 70 seconds */ +#define COOLPERIOD_SEC 10 + +#define KB *(1 <<10) +#define MB *(1 <<20) +#define GB *(1U<<30) + +static const size_t maxMemory = (sizeof(size_t)==4) ? (2 GB - 64 MB) : (size_t)(1ULL << ((sizeof(size_t)*8)-31)); + +static U32 g_compressibilityDefault = 50; + + +/* ************************************* +* console display +***************************************/ +#define DEFAULT_DISPLAY_LEVEL 2 +#define DISPLAY(...) fprintf(displayOut, __VA_ARGS__) +#define DISPLAYLEVEL(l, ...) if (g_displayLevel>=l) { DISPLAY(__VA_ARGS__); } +static unsigned g_displayLevel = DEFAULT_DISPLAY_LEVEL; /* 0 : no display; 1: errors; 2 : + result + interaction + warnings; 3 : + progression; 4 : + information */ +static FILE* displayOut; + +#define DISPLAYUPDATE(l, ...) if (g_displayLevel>=l) { \ + if ((clock() - g_time > refreshRate) || (g_displayLevel>=4)) \ + { g_time = clock(); DISPLAY(__VA_ARGS__); \ + if (g_displayLevel>=4) fflush(displayOut); } } +static const clock_t refreshRate = CLOCKS_PER_SEC * 15 / 100; +static clock_t g_time = 0; + + +/* ************************************* +* Exceptions +***************************************/ +#ifndef DEBUG +# define DEBUG 0 +#endif +#define DEBUGOUTPUT(...) { if (DEBUG) DISPLAY(__VA_ARGS__); } +#define EXM_THROW(error, ...) \ +{ \ + DEBUGOUTPUT("Error defined at %s, line %i : \n", __FILE__, __LINE__); \ + DISPLAYLEVEL(1, "Error %i : ", error); \ + DISPLAYLEVEL(1, __VA_ARGS__); \ + DISPLAYLEVEL(1, "\n"); \ + exit(error); \ +} + + +/* ************************************* +* Benchmark Parameters +***************************************/ +static unsigned g_nbIterations = NBLOOPS; +static size_t g_blockSize = 0; +int g_additionalParam = 0; + +void BMK_setNotificationLevel(unsigned level) { g_displayLevel=level; } + +void BMK_setAdditionalParam(int additionalParam) { g_additionalParam=additionalParam; } + +void BMK_SetNbIterations(unsigned nbLoops) +{ + g_nbIterations = nbLoops; + DISPLAYLEVEL(3, "- test >= %u seconds per compression / decompression -\n", g_nbIterations); +} + +void BMK_SetBlockSize(size_t blockSize) +{ + g_blockSize = blockSize; + DISPLAYLEVEL(2, "using blocks of size %u KB \n", (unsigned)(blockSize>>10)); +} + + +/* ******************************************************** +* Bench functions +**********************************************************/ +#undef MIN +#undef MAX +#define MIN(a,b) ((a)<(b) ? (a) : (b)) +#define MAX(a,b) ((a)>(b) ? (a) : (b)) + +typedef struct +{ + z_const char* srcPtr; + size_t srcSize; + char* cPtr; + size_t cRoom; + size_t cSize; + char* resPtr; + size_t resSize; +} blockParam_t; + +typedef enum { BMK_ZSTD, BMK_ZSTD_STREAM, BMK_ZLIB, BMK_ZWRAP_ZLIB, BMK_ZWRAP_ZSTD, BMK_ZLIB_REUSE, BMK_ZWRAP_ZLIB_REUSE, BMK_ZWRAP_ZSTD_REUSE } BMK_compressor; + + +static int BMK_benchMem(z_const void* srcBuffer, size_t srcSize, + const char* displayName, int cLevel, + const size_t* fileSizes, U32 nbFiles, + const void* dictBuffer, size_t dictBufferSize, BMK_compressor compressor) +{ + size_t const blockSize = (g_blockSize>=32 ? g_blockSize : srcSize) + (!srcSize) /* avoid div by 0 */ ; + size_t const avgSize = MIN(g_blockSize, (srcSize / nbFiles)); + U32 const maxNbBlocks = (U32) ((srcSize + (blockSize-1)) / blockSize) + nbFiles; + blockParam_t* const blockTable = (blockParam_t*) malloc(maxNbBlocks * sizeof(blockParam_t)); + size_t const maxCompressedSize = ZSTD_compressBound(srcSize) + (maxNbBlocks * 1024); /* add some room for safety */ + void* const compressedBuffer = malloc(maxCompressedSize); + void* const resultBuffer = malloc(srcSize); + ZSTD_CCtx* const ctx = ZSTD_createCCtx(); + ZSTD_DCtx* const dctx = ZSTD_createDCtx(); + U32 nbBlocks; + + /* checks */ + if (!compressedBuffer || !resultBuffer || !blockTable || !ctx || !dctx) + EXM_THROW(31, "allocation error : not enough memory"); + + /* init */ + if (strlen(displayName)>17) displayName += strlen(displayName)-17; /* can only display 17 characters */ + + /* Init blockTable data */ + { z_const char* srcPtr = (z_const char*)srcBuffer; + char* cPtr = (char*)compressedBuffer; + char* resPtr = (char*)resultBuffer; + U32 fileNb; + for (nbBlocks=0, fileNb=0; fileNb ACTIVEPERIOD_MICROSEC) { + DISPLAYLEVEL(2, "\rcooling down ... \r"); + UTIL_sleep(COOLPERIOD_SEC); + coolTime = UTIL_getTime(); + } + + /* Compression */ + DISPLAYLEVEL(2, "%2s-%-17.17s :%10u ->\r", marks[markNb], displayName, (unsigned)srcSize); + if (!cCompleted) memset(compressedBuffer, 0xE5, maxCompressedSize); /* warm up and erase result buffer */ + + UTIL_sleepMilli(1); /* give processor time to other processes */ + UTIL_waitForNextTick(); + clockStart = UTIL_getTime(); + + if (!cCompleted) { /* still some time to do compression tests */ + U32 nbLoops = 0; + if (compressor == BMK_ZSTD) { + ZSTD_parameters const zparams = ZSTD_getParams(cLevel, avgSize, dictBufferSize); + ZSTD_customMem const cmem = { NULL, NULL, NULL }; + ZSTD_CDict* const cdict = ZSTD_createCDict_advanced(dictBuffer, dictBufferSize, ZSTD_dlm_byRef, ZSTD_dct_auto, zparams.cParams, cmem); + if (cdict==NULL) EXM_THROW(1, "ZSTD_createCDict_advanced() allocation failure"); + + do { + U32 blockNb; + size_t rSize; + for (blockNb=0; blockNbmaxTime; + } } + + cSize = 0; + { U32 blockNb; for (blockNb=0; blockNb%10u (%5.3f),%6.1f MB/s\r", + marks[markNb], displayName, (unsigned)srcSize, (unsigned)cSize, ratio, + (double)srcSize / fastestC ); + + (void)fastestD; (void)crcOrig; /* unused when decompression disabled */ +#if 1 + /* Decompression */ + if (!dCompleted) memset(resultBuffer, 0xD6, srcSize); /* warm result buffer */ + + UTIL_sleepMilli(1); /* give processor time to other processes */ + UTIL_waitForNextTick(); + clockStart = UTIL_getTime(); + + if (!dCompleted) { + U32 nbLoops = 0; + if (compressor == BMK_ZSTD) { + ZSTD_DDict* ddict = ZSTD_createDDict(dictBuffer, dictBufferSize); + if (!ddict) EXM_THROW(2, "ZSTD_createDDict() allocation failure"); + do { + unsigned blockNb; + for (blockNb=0; blockNbmaxTime; + } } + + markNb = (markNb+1) % NB_MARKS; + DISPLAYLEVEL(2, "%2s-%-17.17s :%10u ->%10u (%5.3f),%6.1f MB/s ,%6.1f MB/s\r", + marks[markNb], displayName, (unsigned)srcSize, (unsigned)cSize, ratio, + (double)srcSize / fastestC, + (double)srcSize / fastestD ); + + /* CRC Checking */ + { U64 const crcCheck = XXH64(resultBuffer, srcSize, 0); + if (crcOrig!=crcCheck) { + size_t u; + DISPLAY("!!! WARNING !!! %14s : Invalid Checksum : %x != %x \n", displayName, (unsigned)crcOrig, (unsigned)crcCheck); + for (u=0; u u) break; + bacc += blockTable[segNb].srcSize; + } + pos = (U32)(u - bacc); + bNb = pos / (128 KB); + DISPLAY("(block %u, sub %u, pos %u) \n", segNb, bNb, pos); + break; + } + if (u==srcSize-1) { /* should never happen */ + DISPLAY("no difference detected\n"); + } } + break; + } } /* CRC Checking */ +#endif + } /* for (testNb = 1; testNb <= (g_nbIterations + !g_nbIterations); testNb++) */ + + if (g_displayLevel == 1) { + double cSpeed = (double)srcSize / fastestC; + double dSpeed = (double)srcSize / fastestD; + if (g_additionalParam) + DISPLAY("-%-3i%11i (%5.3f) %6.2f MB/s %6.1f MB/s %s (param=%d)\n", cLevel, (int)cSize, ratio, cSpeed, dSpeed, displayName, g_additionalParam); + else + DISPLAY("-%-3i%11i (%5.3f) %6.2f MB/s %6.1f MB/s %s\n", cLevel, (int)cSize, ratio, cSpeed, dSpeed, displayName); + } + DISPLAYLEVEL(2, "%2i#\n", cLevel); + } /* Bench */ + + /* clean up */ + free(blockTable); + free(compressedBuffer); + free(resultBuffer); + ZSTD_freeCCtx(ctx); + ZSTD_freeDCtx(dctx); + return 0; +} + + +static size_t BMK_findMaxMem(U64 requiredMem) +{ + size_t const step = 64 MB; + BYTE* testmem = NULL; + + requiredMem = (((requiredMem >> 26) + 1) << 26); + requiredMem += step; + if (requiredMem > maxMemory) requiredMem = maxMemory; + + do { + testmem = (BYTE*)malloc((size_t)requiredMem); + requiredMem -= step; + } while (!testmem && requiredMem); /* do not allocate zero bytes */ + + free(testmem); + return (size_t)(requiredMem+1); /* avoid zero */ +} + +static void BMK_benchCLevel(void* srcBuffer, size_t benchedSize, + const char* displayName, int cLevel, int cLevelLast, + const size_t* fileSizes, unsigned nbFiles, + const void* dictBuffer, size_t dictBufferSize) +{ + int l; + + const char* pch = strrchr(displayName, '\\'); /* Windows */ + if (!pch) pch = strrchr(displayName, '/'); /* Linux */ + if (pch) displayName = pch+1; + + SET_REALTIME_PRIORITY; + + if (g_displayLevel == 1 && !g_additionalParam) + DISPLAY("bench %s %s: input %u bytes, %u seconds, %u KB blocks\n", + ZSTD_VERSION_STRING, ZSTD_GIT_COMMIT_STRING, + (unsigned)benchedSize, g_nbIterations, (unsigned)(g_blockSize>>10)); + + if (cLevelLast < cLevel) cLevelLast = cLevel; + + DISPLAY("benchmarking zstd %s (using ZSTD_CStream)\n", ZSTD_VERSION_STRING); + for (l=cLevel; l <= cLevelLast; l++) { + BMK_benchMem(srcBuffer, benchedSize, + displayName, l, + fileSizes, nbFiles, + dictBuffer, dictBufferSize, BMK_ZSTD_STREAM); + } + + DISPLAY("benchmarking zstd %s (using ZSTD_CCtx)\n", ZSTD_VERSION_STRING); + for (l=cLevel; l <= cLevelLast; l++) { + BMK_benchMem(srcBuffer, benchedSize, + displayName, l, + fileSizes, nbFiles, + dictBuffer, dictBufferSize, BMK_ZSTD); + } + + DISPLAY("benchmarking zstd %s (using zlibWrapper)\n", ZSTD_VERSION_STRING); + for (l=cLevel; l <= cLevelLast; l++) { + BMK_benchMem(srcBuffer, benchedSize, + displayName, l, + fileSizes, nbFiles, + dictBuffer, dictBufferSize, BMK_ZWRAP_ZSTD_REUSE); + } + + DISPLAY("benchmarking zstd %s (zlibWrapper not reusing a context)\n", ZSTD_VERSION_STRING); + for (l=cLevel; l <= cLevelLast; l++) { + BMK_benchMem(srcBuffer, benchedSize, + displayName, l, + fileSizes, nbFiles, + dictBuffer, dictBufferSize, BMK_ZWRAP_ZSTD); + } + + + if (cLevelLast > Z_BEST_COMPRESSION) cLevelLast = Z_BEST_COMPRESSION; + + DISPLAY("\n"); + DISPLAY("benchmarking zlib %s\n", ZLIB_VERSION); + for (l=cLevel; l <= cLevelLast; l++) { + BMK_benchMem(srcBuffer, benchedSize, + displayName, l, + fileSizes, nbFiles, + dictBuffer, dictBufferSize, BMK_ZLIB_REUSE); + } + + DISPLAY("benchmarking zlib %s (zlib not reusing a context)\n", ZLIB_VERSION); + for (l=cLevel; l <= cLevelLast; l++) { + BMK_benchMem(srcBuffer, benchedSize, + displayName, l, + fileSizes, nbFiles, + dictBuffer, dictBufferSize, BMK_ZLIB); + } + + DISPLAY("benchmarking zlib %s (using zlibWrapper)\n", ZLIB_VERSION); + for (l=cLevel; l <= cLevelLast; l++) { + BMK_benchMem(srcBuffer, benchedSize, + displayName, l, + fileSizes, nbFiles, + dictBuffer, dictBufferSize, BMK_ZWRAP_ZLIB_REUSE); + } + + DISPLAY("benchmarking zlib %s (zlibWrapper not reusing a context)\n", ZLIB_VERSION); + for (l=cLevel; l <= cLevelLast; l++) { + BMK_benchMem(srcBuffer, benchedSize, + displayName, l, + fileSizes, nbFiles, + dictBuffer, dictBufferSize, BMK_ZWRAP_ZLIB); + } +} + + +/*! BMK_loadFiles() : + Loads `buffer` with content of files listed within `fileNamesTable`. + At most, fills `buffer` entirely */ +static void BMK_loadFiles(void* buffer, size_t bufferSize, + size_t* fileSizes, + const char** fileNamesTable, unsigned nbFiles) +{ + size_t pos = 0, totalSize = 0; + unsigned n; + for (n=0; n bufferSize-pos) fileSize = bufferSize-pos, nbFiles=n; /* buffer too small - stop after this file */ + { size_t const readSize = fread(((char*)buffer)+pos, 1, (size_t)fileSize, f); + if (readSize != (size_t)fileSize) EXM_THROW(11, "could not read %s", fileNamesTable[n]); + pos += readSize; } + fileSizes[n] = (size_t)fileSize; + totalSize += (size_t)fileSize; + fclose(f); + } + + if (totalSize == 0) EXM_THROW(12, "no data to bench"); +} + +static void BMK_benchFileTable(const char** fileNamesTable, unsigned nbFiles, + const char* dictFileName, int cLevel, int cLevelLast) +{ + void* srcBuffer; + size_t benchedSize; + void* dictBuffer = NULL; + size_t dictBufferSize = 0; + size_t* fileSizes = (size_t*)malloc(nbFiles * sizeof(size_t)); + U64 const totalSizeToLoad = UTIL_getTotalFileSize(fileNamesTable, nbFiles); + char mfName[20] = {0}; + + if (!fileSizes) EXM_THROW(12, "not enough memory for fileSizes"); + + /* Load dictionary */ + if (dictFileName != NULL) { + U64 const dictFileSize = UTIL_getFileSize(dictFileName); + if (dictFileSize > 64 MB) + EXM_THROW(10, "dictionary file %s too large", dictFileName); + dictBufferSize = (size_t)dictFileSize; + dictBuffer = malloc(dictBufferSize); + if (dictBuffer==NULL) + EXM_THROW(11, "not enough memory for dictionary (%u bytes)", (unsigned)dictBufferSize); + BMK_loadFiles(dictBuffer, dictBufferSize, fileSizes, &dictFileName, 1); + } + + /* Memory allocation & restrictions */ + benchedSize = BMK_findMaxMem(totalSizeToLoad * 3) / 3; + if ((U64)benchedSize > totalSizeToLoad) benchedSize = (size_t)totalSizeToLoad; + if (benchedSize < totalSizeToLoad) + DISPLAY("Not enough memory; testing %u MB only...\n", (unsigned)(benchedSize >> 20)); + srcBuffer = malloc(benchedSize + !benchedSize); + if (!srcBuffer) EXM_THROW(12, "not enough memory"); + + /* Load input buffer */ + BMK_loadFiles(srcBuffer, benchedSize, fileSizes, fileNamesTable, nbFiles); + + /* Bench */ + snprintf (mfName, sizeof(mfName), " %u files", nbFiles); + { const char* displayName = (nbFiles > 1) ? mfName : fileNamesTable[0]; + BMK_benchCLevel(srcBuffer, benchedSize, + displayName, cLevel, cLevelLast, + fileSizes, nbFiles, + dictBuffer, dictBufferSize); + } + + /* clean up */ + free(srcBuffer); + free(dictBuffer); + free(fileSizes); +} + + +static void BMK_syntheticTest(int cLevel, int cLevelLast, double compressibility) +{ + char name[20] = {0}; + size_t benchedSize = 10000000; + void* const srcBuffer = malloc(benchedSize); + + /* Memory allocation */ + if (!srcBuffer) EXM_THROW(21, "not enough memory"); + + /* Fill input buffer */ + RDG_genBuffer(srcBuffer, benchedSize, compressibility, 0.0, 0); + + /* Bench */ + snprintf (name, sizeof(name), "Synthetic %2u%%", (unsigned)(compressibility*100)); + BMK_benchCLevel(srcBuffer, benchedSize, name, cLevel, cLevelLast, &benchedSize, 1, NULL, 0); + + /* clean up */ + free(srcBuffer); +} + + +int BMK_benchFiles(const char** fileNamesTable, unsigned nbFiles, + const char* dictFileName, int cLevel, int cLevelLast) +{ + double const compressibility = (double)g_compressibilityDefault / 100; + + if (nbFiles == 0) + BMK_syntheticTest(cLevel, cLevelLast, compressibility); + else + BMK_benchFileTable(fileNamesTable, nbFiles, dictFileName, cLevel, cLevelLast); + return 0; +} + + + + +/*-************************************ +* Command Line +**************************************/ +static int usage(const char* programName) +{ + DISPLAY(WELCOME_MESSAGE); + DISPLAY( "Usage :\n"); + DISPLAY( " %s [args] [FILE(s)] [-o file]\n", programName); + DISPLAY( "\n"); + DISPLAY( "FILE : a filename\n"); + DISPLAY( " with no FILE, or when FILE is - , read standard input\n"); + DISPLAY( "Arguments :\n"); + DISPLAY( " -D file: use `file` as Dictionary \n"); + DISPLAY( " -h/-H : display help/long help and exit\n"); + DISPLAY( " -V : display Version number and exit\n"); + DISPLAY( " -v : verbose mode; specify multiple times to increase log level (default:%d)\n", DEFAULT_DISPLAY_LEVEL); + DISPLAY( " -q : suppress warnings; specify twice to suppress errors too\n"); +#ifdef UTIL_HAS_CREATEFILELIST + DISPLAY( " -r : operate recursively on directories\n"); +#endif + DISPLAY( "\n"); + DISPLAY( "Benchmark arguments :\n"); + DISPLAY( " -b# : benchmark file(s), using # compression level (default : %d) \n", ZSTDCLI_CLEVEL_DEFAULT); + DISPLAY( " -e# : test all compression levels from -bX to # (default: %d)\n", ZSTDCLI_CLEVEL_DEFAULT); + DISPLAY( " -i# : minimum evaluation time in seconds (default : 3s)\n"); + DISPLAY( " -B# : cut file into independent blocks of size # (default: no block)\n"); + return 0; +} + +static int badusage(const char* programName) +{ + DISPLAYLEVEL(1, "Incorrect parameters\n"); + if (g_displayLevel >= 1) usage(programName); + return 1; +} + +static void waitEnter(void) +{ + int unused; + DISPLAY("Press enter to continue...\n"); + unused = getchar(); + (void)unused; +} + +/*! readU32FromChar() : + @return : unsigned integer value reach from input in `char` format + Will also modify `*stringPtr`, advancing it to position where it stopped reading. + Note : this function can overflow if digit string > MAX_UINT */ +static unsigned readU32FromChar(const char** stringPtr) +{ + unsigned result = 0; + while ((**stringPtr >='0') && (**stringPtr <='9')) + result *= 10, result += (unsigned)(**stringPtr - '0'), (*stringPtr)++ ; + return result; +} + + +#define CLEAN_RETURN(i) { operationResult = (i); goto _end; } + +int main(int argCount, char** argv) +{ + int argNb, + main_pause=0, + nextEntryIsDictionary=0, + operationResult=0, + nextArgumentIsFile=0; + int cLevel = ZSTDCLI_CLEVEL_DEFAULT; + int cLevelLast = 1; + unsigned recursive = 0; + FileNamesTable* filenames = UTIL_allocateFileNamesTable((size_t)argCount); + const char* programName = argv[0]; + const char* dictFileName = NULL; + char* dynNameSpace = NULL; + + /* init */ + if (filenames==NULL) { DISPLAY("zstd: %s \n", strerror(errno)); exit(1); } + displayOut = stderr; + + /* Pick out program name from path. Don't rely on stdlib because of conflicting behavior */ + { size_t pos; + for (pos = strlen(programName); pos > 0; pos--) { if (programName[pos] == '/') { pos++; break; } } + programName += pos; + } + + /* command switches */ + for(argNb=1; argNb='0') && (*argument<='9')) { + BMK_setAdditionalParam((int)readU32FromChar(&argument)); + } else + main_pause=1; + break; + /* unknown command */ + default : CLEAN_RETURN(badusage(programName)); + } + } + continue; + } /* if (argument[0]=='-') */ + + } /* if (nextArgumentIsAFile==0) */ + + if (nextEntryIsDictionary) { + nextEntryIsDictionary = 0; + dictFileName = argument; + continue; + } + + /* add filename to list */ + UTIL_refFilename(filenames, argument); + } + + /* Welcome message (if verbose) */ + DISPLAYLEVEL(3, WELCOME_MESSAGE); + +#ifdef UTIL_HAS_CREATEFILELIST + if (recursive) { + UTIL_expandFNT(&filenames, 1); + } +#endif + + BMK_setNotificationLevel(g_displayLevel); + BMK_benchFiles(filenames->fileNames, (unsigned)filenames->tableSize, dictFileName, cLevel, cLevelLast); + +_end: + if (main_pause) waitEnter(); + free(dynNameSpace); + UTIL_freeFileNamesTable(filenames); + return operationResult; +} -- cgit v1.2.3