.. _basic workflow dev guide: Basic Workflow ============== The following chart illustrates the basic Ceph development workflow: .. ditaa:: Upstream Code Your Local Environment /----------\ git clone /-------------\ | Ceph | -------------------------> | ceph/main | \----------/ \-------------/ ^ | | | git branch fix_1 | git merge | | v /----------------\ git commit --amend /-------------\ | make check |---------------------> | ceph/fix_1 | | ceph--qa--suite| \-------------/ \----------------/ | ^ | fix changes | | test changes | review | git commit | | | v /--------------\ /-------------\ | github |<---------------------- | ceph/fix_1 | | pull request | git push \-------------/ \--------------/ This page assumes that you are a new contributor with an idea for a bugfix or an enhancement, but you do not know how to proceed. Watch the `Getting Started with Ceph Development `_ video for a practical summary of this workflow. Updating the tracker -------------------- Find the :ref:`issue-tracker` (Redmine) number of the bug you intend to fix. If no tracker issue exists, create one. There is only one case in which you do not have to create a Redmine tracker issue: the case of minor documentation changes. Simple documentation cleanup does not require a corresponding tracker issue. Major documenatation changes do require a tracker issue. Major documentation changes include adding new documentation chapters or files, and making substantial changes to the structure or content of the documentation. A (Redmine) tracker ticket explains the issue (bug) to other Ceph developers to keep them informed as the bug nears resolution. Provide a useful, clear title and include detailed information in the description. When composing the title of the ticket, ask yourself "If I need to search for this ticket two years from now, which keywords am I likely to search for?" Then include those keywords in the title. If your tracker permissions are elevated, assign the bug to yourself by setting the ``Assignee`` field. If your tracker permissions have not been elevated, just add a comment with a short message that says "I am working on this issue". Ceph Workflow Overview ---------------------- Three repositories are involved in the Ceph workflow. They are: 1. The upstream repository (ceph/ceph) 2. Your fork of the upstream repository (your_github_id/ceph) 3. Your local working copy of the repository (on your workstation) The procedure for making changes to the Ceph repository is as follows: #. Configure your local environment #. :ref:`Create a fork` of the "upstream Ceph" repository. #. :ref:`Clone the fork` to your local filesystem. #. Fix the bug #. :ref:`Synchronize local main with upstream main`. #. :ref:`Create a bugfix branch` in your local working copy. #. :ref:`Make alterations to the local working copy of the repository in your local filesystem`. #. :ref:`Push the changes in your local working copy to your fork`. #. Create a Pull Request to push the change upstream #. Create a Pull Request that asks for your changes to be added into the "upstream Ceph" repository. Preparing Your Local Working Copy of the Ceph Repository -------------------------------------------------------- The procedures in this section, "Preparing Your Local Working Copy of the Ceph Repository", must be followed only when you are first setting up your local environment. If this is your first time working with the Ceph project, then these commands are necessary and are the first commands that you should run. .. _forking: Creating a Fork of the Ceph Repository ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ See the `GitHub documentation `_ for detailed instructions on forking. In short, if your GitHub username is "mygithubaccount", your fork of the upstream repo will appear at ``https://github.com/mygithubaccount/ceph``. .. _cloning: Cloning Your Fork ^^^^^^^^^^^^^^^^^ After you have created your fork, clone it by running the following command: .. prompt:: bash $ git clone https://github.com/mygithubaccount/ceph You must fork the Ceph repository before you clone it. If you fail to fork, you cannot open a `GitHub pull request `_. For more information on using GitHub, refer to `GitHub Help `_. Configuring Your Local Environment ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The commands in this section configure your local git environment so that it generates "Signed-off-by:" tags. These commands also set up your local environment so that it can stay synchronized with the upstream repository. These commands are necessary only during the initial setup of your local working copy. Another way to say that is "These commands are necessary only the first time that you are working with the Ceph repository. They are, however, unavoidable, and if you fail to run them then you will not be able to work on the Ceph repository.". 1. Configure your local git environment with your name and email address. .. note:: These commands will work only from within the ``ceph/`` directory that was created when you cloned your fork. .. prompt:: bash $ git config user.name "FIRST_NAME LAST_NAME" git config user.email "MY_NAME@example.com" 2. Add the upstream repo as a "remote" and fetch it: .. prompt:: bash $ git remote add ceph https://github.com/ceph/ceph.git git fetch ceph These commands fetch all the branches and commits from ``ceph/ceph.git`` to the local git repo as ``remotes/ceph/$BRANCH_NAME`` and can be referenced as ``ceph/$BRANCH_NAME`` in local git commands. Fixing the Bug -------------- .. _synchronizing: Synchronizing Local Main with Upstream Main ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ In your local working copy, there is a copy of the ``main`` branch in ``remotes/origin/main``. This is called "local main". This copy of the main branch (https://github.com/your_github_id/ceph.git) is "frozen in time" at the moment that you cloned it, but the upstream repo (https://github.com/ceph/ceph.git, typically abbreviated to ``ceph/ceph.git``) that it was forked from is not frozen in time: the upstream repo is still being updated by other contributors. Because upstream main is continually receiving updates from other contributors, your fork will drift farther and farther from the state of the upstream repo when you cloned it. Keep your fork's ``main`` branch synchronized with upstream main to reduce drift between your fork's main branch and the upstream main branch. Here are the commands for keeping your fork synchronized with the upstream repository: .. prompt:: bash $ git fetch ceph git checkout main git reset --hard ceph/main git push -u origin main Follow this procedure often to keep your local ``main`` in sync with upstream ``main``. If the command ``git status`` returns a line that reads "Untracked files", see :ref:`the procedure on updating submodules `. .. _bugfix_branch: Creating a Bugfix branch ^^^^^^^^^^^^^^^^^^^^^^^^ Create a branch for your bugfix: .. prompt:: bash $ git checkout main git checkout -b fix_1 git push -u origin fix_1 The first command (git checkout main) makes sure that the bugfix branch "fix_1" is created from the most recent state of the main branch of the upstream repository. The second command (git checkout -b fix_1) creates a "bugfix branch" called "fix_1" in your local working copy of the repository. The changes that you make in order to fix the bug will be commited to this branch. The third command (git push -u origin fix_1) pushes the bugfix branch from your local working repository to your fork of the upstream repository. .. _fixing_bug_locally: Fixing the bug in the local working copy ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ #. **Updating the tracker** In the `Ceph issue tracker `_, change the status of the tracker issue to "In progress". This communicates to other Ceph contributors that you have begun working on a fix, which helps to avoid duplication of effort. If you don't have permission to change that field, just comment that you are working on the issue. #. **Fixing the bug itself** This guide cannot tell you how to fix the bug that you have chosen to fix. This guide assumes that you know what required improvement, and that you know what to do to provide that improvement. It might be that your fix is simple and requires only minimal testing. But that's unlikely. It is more likely that the process of fixing your bug will be iterative and will involve trial, error, skill, and patience. For a detailed discussion of the tools available for validating bugfixes, see the chapters on testing. Pushing the Fix to Your Fork ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ You have finished work on the bugfix. You have tested the bugfix, and you believe that it works. #. Commit the changes to your local working copy. Commit the changes to the `fix_1` branch of your local working copy by using the ``--signoff`` option (here represented as the `s` portion of the `-as` flag): .. prompt:: bash $ git commit -as .. _push_changes: #. Push the changes to your fork: Push the changes from the `fix_1` branch of your local working copy to the `fix_1` branch of your fork of the upstream repository: .. prompt:: bash $ git push origin fix_1 .. note:: In the command ``git push origin fix_1``, ``origin`` is the name of your fork of the upstream Ceph repository, and can be thought of as a nickname for ``git@github.com:username/ceph.git``, where ``username`` is your GitHub username. It is possible that ``origin`` is not the name of your fork. Discover the name of your fork by running ``git remote -v``, as shown here: .. code-block:: bash $ git remote -v ceph https://github.com/ceph/ceph.git (fetch) ceph https://github.com/ceph/ceph.git (push) origin git@github.com:username/ceph.git (fetch) origin git@github.com:username/ceph.git (push) The line:: origin git@github.com:username/ceph.git (fetch) and the line:: origin git@github.com:username/ceph.git (push) provide the information that "origin" is the name of your fork of the Ceph repository. Opening a GitHub pull request ----------------------------- After you have pushed the bugfix to your fork, open a GitHub pull request (PR). This makes your bugfix visible to the community of Ceph contributors. They will review it. They may perform additional testing on your bugfix, and they might request changes to the bugfix. Be prepared to receive suggestions and constructive criticism in the form of comments within the PR. If you don't know how to create and manage pull requests, read `this GitHub pull request tutorial`_. .. _`this GitHub pull request tutorial`: https://help.github.com/articles/using-pull-requests/ To learn what constitutes a "good" pull request, see the `Git Commit Good Practice`_ article at the `OpenStack Project Wiki`_. .. _`Git Commit Good Practice`: https://wiki.openstack.org/wiki/GitCommitMessages .. _`OpenStack Project Wiki`: https://wiki.openstack.org/wiki/Main_Page See also our own `Submitting Patches `_ document. After your pull request (PR) has been opened, update the :ref:`issue-tracker` by adding a comment directing other contributors to your PR. The comment can be as simple as this:: *PR*: https://github.com/ceph/ceph/pull/$NUMBER_OF_YOUR_PULL_REQUEST Understanding Automated PR validation ------------------------------------- When you create or update your PR, the Ceph project's `Continuous Integration (CI) `_ infrastructure automatically tests it. At the time of this writing (May 2022), the automated CI testing included many tests. These five are among them: #. a test to check that the commits are properly signed (see :ref:`submitting-patches`): #. a test to check that the documentation builds #. a test to check that the submodules are unmodified #. a test to check that the API is in order #. a :ref:`make check` test Additional tests may be run depending on which files your PR modifies. The :ref:`make check` test builds the PR and runs it through a battery of tests. These tests run on servers that are operated by the Ceph Continuous Integration (CI) team. When the tests have completed their run, the result is shown on GitHub in the pull request itself. Test your modifications before you open a PR. Refer to the chapters on testing for details. Notes on PR make check test ^^^^^^^^^^^^^^^^^^^^^^^^^^^ The GitHub :ref:`make check` test is driven by a Jenkins instance. Jenkins merges your PR branch into the latest version of the base branch before it starts any tests. This means that you don't have to rebase the PR in order to pick up any fixes. You can trigger PR tests at any time by adding a comment to the PR - the comment should contain the string "test this please". Since a human who is subscribed to the PR might interpret that as a request for him or her to test the PR, you must address Jenkins directly. For example, write "jenkins retest this please". If you need to run only one of the tests, you can request it with a command like "jenkins test signed". A list of these requests is automatically added to the end of each new PR's description, so check there to find the single test you need. If there is a build failure and you aren't sure what caused it, check the :ref:`make check` log. To access the make check log, click the "details" (next to the :ref:`make check` test in the PR) link to enter the Jenkins web GUI. Then click "Console Output" (on the left). Jenkins is configured to search logs for strings that are known to have been associated with :ref:`make check` failures in the past. However, there is no guarantee that these known strings are associated with any given :ref:`make check` failure. You'll have to read through the log to determine the cause of your specific failure. Integration tests AKA ceph-qa-suite ----------------------------------- Since Ceph is complex, it may be necessary to test your fix to see how it behaves on real clusters running on physical or virtual hardware. Tests designed for this purpose live in the `ceph/qa sub-directory`_ and are run via the `teuthology framework`_. .. _`ceph/qa sub-directory`: https://github.com/ceph/ceph/tree/main/qa/ .. _`teuthology repository`: https://github.com/ceph/teuthology .. _`teuthology framework`: https://github.com/ceph/teuthology The Ceph community has access to the `Sepia lab `_ where :ref:`testing-integration-tests` can be run on physical hardware. Other developers may add tags like "needs-qa" to your PR. This allows PRs that need testing to be merged into a single branch and tested all at the same time. Since teuthology suites can take hours (even days in some cases) to run, this can save a lot of time. To request access to the Sepia lab, start `here `_. Integration testing is discussed in more detail in the :ref:`testing-integration-tests` chapter. Code review ----------- Once your bugfix has been thoroughly tested, or even during this process, it will be subjected to code review by other developers. This typically takes the form of comments in the PR itself, but can be supplemented by discussions on :ref:`irc` and the :ref:`mailing-list`. Amending your PR ---------------- While your PR is going through testing and `Code Review`_, you can modify it at any time by editing files in your local branch. After updates are committed locally (to the ``fix_1`` branch in our example), they need to be pushed to GitHub so they appear in the PR. Modifying the PR is done by adding commits to the ``fix_1`` branch upon which it is based, often followed by rebasing to modify the branch's git history. See `this tutorial `_ for a good introduction to rebasing. When you are done with your modifications, you will need to force push your branch with: .. prompt:: bash $ git push --force origin fix_1 Why do we take these extra steps instead of simply adding additional commits the PR? It is best practice for a PR to consist of a single commit; this makes for clean history, eases peer review of your changes, and facilitates merges. In rare circumstances it also makes it easier to cleanly revert changes. Merging ------- The bugfix process completes when a project lead merges your PR. When this happens, it is a signal for you (or the lead who merged the PR) to change the :ref:`issue-tracker` status to "Resolved". Some issues may be flagged for backporting, in which case the status should be changed to "Pending Backport" (see the :ref:`backporting` chapter for details). See also :ref:`merging` for more information on merging. Proper Merge Commit Format ^^^^^^^^^^^^^^^^^^^^^^^^^^ This is the most basic form of a merge commit:: doc/component: title of the commit Reviewed-by: Reviewer Name This consists of two parts: #. The title of the commit / PR to be merged. #. The name and email address of the reviewer. Enclose the reviewer's email address in angle brackets. Using .githubmap to Find a Reviewer's Email Address ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If you cannot find the email address of the reviewer on his or her GitHub page, you can look it up in the **.githubmap** file, which can be found in the repository at **/ceph/.githubmap**. Using "git log" to find a Reviewer's Email Address ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If you cannot find a reviewer's email address by using the above methods, you can search the git log for their email address. Reviewers are likely to have committed something before. If they have made previous contributions, the git log will probably contain their email address. Use the following command .. prompt:: bash [branch-under-review]$ git log Using ptl-tool to Generate Merge Commits ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Another method of generating merge commits involves using Patrick Donnelly's **ptl-tool** pull commits. This tool can be found at **/ceph/src/script/ptl-tool.py**. Merge commits that have been generated by the **ptl-tool** have the following form:: Merge PR #36257 into main * refs/pull/36257/head: client: move client_lock to _unmount() client: add timer_lock support Reviewed-by: Patrick Donnelly