======================= Config Settings ======================= See `Block Device`_ for additional details. Generic IO Settings =================== ``rbd_compression_hint`` :Description: Hint to send to the OSDs on write operations. If set to ``compressible`` and the OSD ``bluestore_compression_mode`` setting is ``passive``, the OSD will attempt to compress data If set to ``incompressible`` and the OSD compression setting is ``aggressive``, the OSD will not attempt to compress data. :Type: Enum :Required: No :Default: ``none`` :Values: ``none``, ``compressible``, ``incompressible`` ``rbd_read_from_replica_policy`` :Description: Policy for determining which OSD will receive read operations. If set to ``default``, each PG's primary OSD will always be used for read operations. If set to ``balance``, read operations will be sent to a randomly selected OSD within the replica set. If set to ``localize``, read operations will be sent to the closest OSD as determined by the CRUSH map. Note: this feature requires the cluster to be configured with a minimum compatible OSD release of Octopus. :Type: Enum :Required: No :Default: ``default`` :Values: ``default``, ``balance``, ``localize`` Cache Settings ======================= .. sidebar:: Kernel Caching The kernel driver for Ceph block devices can use the Linux page cache to improve performance. The user space implementation of the Ceph block device (i.e., ``librbd``) cannot take advantage of the Linux page cache, so it includes its own in-memory caching, called "RBD caching." RBD caching behaves just like well-behaved hard disk caching. When the OS sends a barrier or a flush request, all dirty data is written to the OSDs. This means that using write-back caching is just as safe as using a well-behaved physical hard disk with a VM that properly sends flushes (i.e. Linux kernel >= 2.6.32). The cache uses a Least Recently Used (LRU) algorithm, and in write-back mode it can coalesce contiguous requests for better throughput. The librbd cache is enabled by default and supports three different cache policies: write-around, write-back, and write-through. Writes return immediately under both the write-around and write-back policies, unless there are more than ``rbd_cache_max_dirty`` unwritten bytes to the storage cluster. The write-around policy differs from the write-back policy in that it does not attempt to service read requests from the cache, unlike the write-back policy, and is therefore faster for high performance write workloads. Under the write-through policy, writes return only when the data is on disk on all replicas, but reads may come from the cache. Prior to receiving a flush request, the cache behaves like a write-through cache to ensure safe operation for older operating systems that do not send flushes to ensure crash consistent behavior. If the librbd cache is disabled, writes and reads go directly to the storage cluster, and writes return only when the data is on disk on all replicas. .. note:: The cache is in memory on the client, and each RBD image has its own. Since the cache is local to the client, there's no coherency if there are others accessing the image. Running GFS or OCFS on top of RBD will not work with caching enabled. Option settings for RBD should be set in the ``[client]`` section of your configuration file or the central config store. These settings include: ``rbd_cache`` :Description: Enable caching for RADOS Block Device (RBD). :Type: Boolean :Required: No :Default: ``true`` ``rbd_cache_policy`` :Description: Select the caching policy for librbd. :Type: Enum :Required: No :Default: ``writearound`` :Values: ``writearound``, ``writeback``, ``writethrough`` ``rbd_cache_writethrough_until_flush`` :Description: Start out in ``writethrough`` mode, and switch to ``writeback`` after the first flush request is received. Enabling is a conservative but safe strategy in case VMs running on RBD volumes are too old to send flushes, like the ``virtio`` driver in Linux kernels older than 2.6.32. :Type: Boolean :Required: No :Default: ``true`` ``rbd_cache_size`` :Description: The per-volume RBD client cache size in bytes. :Type: 64-bit Integer :Required: No :Default: ``32 MiB`` :Policies: write-back and write-through ``rbd_cache_max_dirty`` :Description: The ``dirty`` limit in bytes at which the cache triggers write-back. If ``0``, uses write-through caching. :Type: 64-bit Integer :Required: No :Constraint: Must be less than ``rbd_cache_size``. :Default: ``24 MiB`` :Policies: write-around and write-back ``rbd_cache_target_dirty`` :Description: The ``dirty target`` before the cache begins writing data to the data storage. Does not block writes to the cache. :Type: 64-bit Integer :Required: No :Constraint: Must be less than ``rbd_cache_max_dirty``. :Default: ``16 MiB`` :Policies: write-back ``rbd_cache_max_dirty_age`` :Description: The number of seconds dirty data is in the cache before writeback starts. :Type: Float :Required: No :Default: ``1.0`` :Policies: write-back .. _Block Device: ../../rbd Read-ahead Settings ======================= librbd supports read-ahead/prefetching to optimize small, sequential reads. This should normally be handled by the guest OS in the case of a VM, but boot loaders may not issue efficient reads. Read-ahead is automatically disabled if caching is disabled or if the policy is write-around. ``rbd_readahead_trigger_requests`` :Description: Number of sequential read requests necessary to trigger read-ahead. :Type: Integer :Required: No :Default: ``10`` ``rbd_readahead_max_bytes`` :Description: Maximum size of a read-ahead request. If zero, read-ahead is disabled. :Type: 64-bit Integer :Required: No :Default: ``512 KiB`` ``rbd_readahead_disable_after_bytes`` :Description: After this many bytes have been read from an RBD image, read-ahead is disabled for that image until it is closed. This allows the guest OS to take over read-ahead once it is booted. If zero, read-ahead stays enabled. :Type: 64-bit Integer :Required: No :Default: ``50 MiB`` Image Features ============== RBD supports advanced features which can be specified via the command line when creating images or the default features can be configured via ``rbd_default_features = `` or ``rbd_default_features = ``. ``Layering`` :Description: Layering enables cloning. :Internal value: 1 :CLI value: layering :Added in: v0.52 (Bobtail) :KRBD support: since v3.10 :Default: yes ``Striping v2`` :Description: Striping spreads data across multiple objects. Striping helps with parallelism for sequential read/write workloads. :Internal value: 2 :CLI value: striping :Added in: v0.55 (Bobtail) :KRBD support: since v3.10 (default striping only, "fancy" striping added in v4.17) :Default: yes ``Exclusive locking`` :Description: When enabled, it requires a client to acquire a lock on an object before making a write. Exclusive lock should only be enabled when a single client is accessing an image at any given time. :Internal value: 4 :CLI value: exclusive-lock :Added in: v0.92 (Hammer) :KRBD support: since v4.9 :Default: yes ``Object map`` :Description: Object map support depends on exclusive lock support. Block devices are thin provisioned, which means that they only store data that actually has been written, ie. they are *sparse*. Object map support helps track which objects actually exist (have data stored on a device). Enabling object map support speeds up I/O operations for cloning, importing and exporting a sparsely populated image, and deleting. :Internal value: 8 :CLI value: object-map :Added in: v0.93 (Hammer) :KRBD support: since v5.3 :Default: yes ``Fast-diff`` :Description: Fast-diff support depends on object map support and exclusive lock support. It adds another property to the object map, which makes it much faster to generate diffs between snapshots of an image. It is also much faster to calculate the actual data usage of a snapshot or volume (``rbd du``). :Internal value: 16 :CLI value: fast-diff :Added in: v9.0.1 (Infernalis) :KRBD support: since v5.3 :Default: yes ``Deep-flatten`` :Description: Deep-flatten enables ``rbd flatten`` to work on all snapshots of an image, in addition to the image itself. Without it, snapshots of an image will still rely on the parent, so the parent cannot be deleted until the snapshots are first deleted. Deep-flatten makes a parent independent of its clones, even if they have snapshots, at the expense of using additional OSD device space. :Internal value: 32 :CLI value: deep-flatten :Added in: v9.0.2 (Infernalis) :KRBD support: since v5.1 :Default: yes ``Journaling`` :Description: Journaling support depends on exclusive lock support. Journaling records all modifications to an image in the order they occur. RBD mirroring can utilize the journal to replicate a crash-consistent image to a remote cluster. It is best to let ``rbd-mirror`` manage this feature only as needed, as enabling it long term may result in substantial additional OSD space consumption. :Internal value: 64 :CLI value: journaling :Added in: v10.0.1 (Jewel) :KRBD support: no :Default: no ``Data pool`` :Description: On erasure-coded pools, the image data block objects need to be stored on a separate pool from the image metadata. :Internal value: 128 :Added in: v11.1.0 (Kraken) :KRBD support: since v4.11 :Default: no ``Operations`` :Description: Used to restrict older clients from performing certain maintenance operations against an image (e.g. clone, snap create). :Internal value: 256 :Added in: v13.0.2 (Mimic) :KRBD support: since v4.16 ``Migrating`` :Description: Used to restrict older clients from opening an image when it is in migration state. :Internal value: 512 :Added in: v14.0.1 (Nautilus) :KRBD support: no ``Non-primary`` :Description: Used to restrict changes to non-primary images using snapshot-based mirroring. :Internal value: 1024 :Added in: v15.2.0 (Octopus) :KRBD support: no QOS Settings ============ librbd supports limiting per-image IO, controlled by the following settings. ``rbd_qos_iops_limit`` :Description: The desired limit of IO operations per second. :Type: Unsigned Integer :Required: No :Default: ``0`` ``rbd_qos_bps_limit`` :Description: The desired limit of IO bytes per second. :Type: Unsigned Integer :Required: No :Default: ``0`` ``rbd_qos_read_iops_limit`` :Description: The desired limit of read operations per second. :Type: Unsigned Integer :Required: No :Default: ``0`` ``rbd_qos_write_iops_limit`` :Description: The desired limit of write operations per second. :Type: Unsigned Integer :Required: No :Default: ``0`` ``rbd_qos_read_bps_limit`` :Description: The desired limit of read bytes per second. :Type: Unsigned Integer :Required: No :Default: ``0`` ``rbd_qos_writ_bps_limit`` :Description: The desired limit of write bytes per second. :Type: Unsigned Integer :Required: No :Default: ``0`` ``rbd_qos_iops_burst`` :Description: The desired burst limit of IO operations. :Type: Unsigned Integer :Required: No :Default: ``0`` ``rbd_qos_bps_burst`` :Description: The desired burst limit of IO bytes. :Type: Unsigned Integer :Required: No :Default: ``0`` ``rbd_qos_read_iops_burst`` :Description: The desired burst limit of read operations. :Type: Unsigned Integer :Required: No :Default: ``0`` ``rbd_qos_write_iops_burst`` :Description: The desired burst limit of write operations. :Type: Unsigned Integer :Required: No :Default: ``0`` ``rbd_qos_read_bps_burst`` :Description: The desired burst limit of read bytes per second. :Type: Unsigned Integer :Required: No :Default: ``0`` ``rbd_qos_write_bps_burst`` :Description: The desired burst limit of write bytes per second. :Type: Unsigned Integer :Required: No :Default: ``0`` ``rbd_qos_iops_burst_seconds`` :Description: The desired burst duration in seconds of IO operations. :Type: Unsigned Integer :Required: No :Default: ``1`` ``rbd_qos_bps_burst_seconds`` :Description: The desired burst duration in seconds. :Type: Unsigned Integer :Required: No :Default: ``1`` ``rbd_qos_read_iops_burst_seconds`` :Description: The desired burst duration in seconds of read operations. :Type: Unsigned Integer :Required: No :Default: ``1`` ``rbd_qos_write_iops_burst_seconds`` :Description: The desired burst duration in seconds of write operations. :Type: Unsigned Integer :Required: No :Default: ``1`` ``rbd_qos_read_bps_burst_seconds`` :Description: The desired burst duration in seconds of read bytes. :Type: Unsigned Integer :Required: No :Default: ``1`` ``rbd_qos_write_bps_burst_seconds`` :Description: The desired burst duration in seconds of write bytes. :Type: Unsigned Integer :Required: No :Default: ``1`` ``rbd_qos_schedule_tick_min`` :Description: The minimum schedule tick (in milliseconds) for QoS. :Type: Unsigned Integer :Required: No :Default: ``50``