path: root/src/isa-l/crc/crc64_iso_refl_by16_10.asm

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;  Copyright(c) 2011-2019 Intel Corporation All rights reserved.
;
;  Redistribution and use in source and binary forms, with or without
;  modification, are permitted provided that the following conditions
;  are met:
;    * Redistributions of source code must retain the above copyright
;      notice, this list of conditions and the following disclaimer.
;    * Redistributions in binary form must reproduce the above copyright
;      notice, this list of conditions and the following disclaimer in
;      the documentation and/or other materials provided with the
;      distribution.
;    * Neither the name of Intel Corporation nor the names of its
;      contributors may be used to endorse or promote products derived
;      from this software without specific prior written permission.
;
;  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
;  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
;  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
;  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
;  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
;  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
;  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
;  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
;  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
;  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
;  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;       Function API:
;       uint64_t crc64_iso_refl_by16_10(
;               uint64_t init_crc, //initial CRC value, 64 bits
;               const unsigned char *buf, //buffer pointer to calculate CRC on
;               uint64_t len //buffer length in bytes (64-bit data)
;       );
;
%include "reg_sizes.asm"

%ifndef FUNCTION_NAME
%define FUNCTION_NAME crc64_iso_refl_by16_10
%endif

%if (AS_FEATURE_LEVEL) >= 10

%define	fetch_dist	1024

[bits 64]
default rel

section .text


%ifidn __OUTPUT_FORMAT__, win64
	%xdefine	arg1 rcx
	%xdefine	arg2 rdx
	%xdefine	arg3 r8
%else
	%xdefine	arg1 rdi
	%xdefine	arg2 rsi
	%xdefine	arg3 rdx
%endif

%define TMP 16*0
%ifidn __OUTPUT_FORMAT__, win64
	%define XMM_SAVE 16*2
	%define VARIABLE_OFFSET 16*12+8
%else
	%define VARIABLE_OFFSET 16*2+8
%endif

align 16
global FUNCTION_NAME:ISAL_SYM_TYPE_FUNCTION
FUNCTION_NAME:
	not		arg1
	sub		rsp, VARIABLE_OFFSET

%ifidn __OUTPUT_FORMAT__, win64
	; push the xmm registers into the stack to maintain
	vmovdqa		[rsp + XMM_SAVE + 16*0], xmm6
	vmovdqa		[rsp + XMM_SAVE + 16*1], xmm7
	vmovdqa		[rsp + XMM_SAVE + 16*2], xmm8
	vmovdqa		[rsp + XMM_SAVE + 16*3], xmm9
	vmovdqa		[rsp + XMM_SAVE + 16*4], xmm10
	vmovdqa		[rsp + XMM_SAVE + 16*5], xmm11
	vmovdqa		[rsp + XMM_SAVE + 16*6], xmm12
	vmovdqa		[rsp + XMM_SAVE + 16*7], xmm13
	vmovdqa		[rsp + XMM_SAVE + 16*8], xmm14
	vmovdqa		[rsp + XMM_SAVE + 16*9], xmm15
%endif

	cmp		arg3, 256
	jl		_less_than_256

	; load the initial crc value
	vmovq		xmm10, arg1      ; initial crc

	; receive the initial 128B data, xor the initial crc value
	vmovdqu8	zmm0, [arg2+16*0]
	vmovdqu8	zmm4, [arg2+16*4]
	vpxorq		zmm0, zmm10
	vbroadcasti32x4 zmm10, [rk3]	;zmm10 has rk3 and rk4
					;imm value of pclmulqdq instruction will determine which constant to use

	sub		arg3, 256
	cmp		arg3, 256
	jl		_fold_128_B_loop

	vmovdqu8	zmm7, [arg2+16*8]
	vmovdqu8	zmm8, [arg2+16*12]
	vbroadcasti32x4 zmm16, [rk_1]	;zmm16 has rk-1 and rk-2
	sub		arg3, 256

_fold_256_B_loop:
	add		arg2, 256
	vmovdqu8	zmm3, [arg2+16*0]
	vpclmulqdq	zmm1, zmm0, zmm16, 0x10
	vpclmulqdq	zmm2, zmm0, zmm16, 0x01
	vpxorq		zmm0, zmm1, zmm2
	vpxorq		zmm0, zmm0, zmm3

	vmovdqu8	zmm9, [arg2+16*4]
	vpclmulqdq	zmm5, zmm4, zmm16, 0x10
	vpclmulqdq	zmm6, zmm4, zmm16, 0x01
	vpxorq		zmm4, zmm5, zmm6
	vpxorq		zmm4, zmm4, zmm9

	vmovdqu8	zmm11, [arg2+16*8]
	vpclmulqdq	zmm12, zmm7, zmm16, 0x10
	vpclmulqdq	zmm13, zmm7, zmm16, 0x01
	vpxorq		zmm7, zmm12, zmm13
	vpxorq		zmm7, zmm7, zmm11

	vmovdqu8	zmm17, [arg2+16*12]
	vpclmulqdq	zmm14, zmm8, zmm16, 0x10
	vpclmulqdq	zmm15, zmm8, zmm16, 0x01
	vpxorq		zmm8, zmm14, zmm15
	vpxorq		zmm8, zmm8, zmm17

	sub		arg3, 256
	jge     	_fold_256_B_loop

	;; Fold 256 into 128
	add		arg2, 256
	vpclmulqdq	zmm1, zmm0, zmm10, 0x01
	vpclmulqdq	zmm2, zmm0, zmm10, 0x10
	vpternlogq	zmm7, zmm1, zmm2, 0x96	; xor ABC

	vpclmulqdq	zmm5, zmm4, zmm10, 0x01
	vpclmulqdq	zmm6, zmm4, zmm10, 0x10
	vpternlogq	zmm8, zmm5, zmm6, 0x96	; xor ABC

	vmovdqa32	zmm0, zmm7
	vmovdqa32	zmm4, zmm8

	add		arg3, 128
	jmp		_fold_128_B_register

	; fold 128B at a time. This section of the code folds 2 zmm registers in parallel
_fold_128_B_loop:
	add		arg2, 128	; update the buffer pointer
	vmovdqu8	zmm8, [arg2+16*0]
	vpclmulqdq	zmm1, zmm0, zmm10, 0x10
	vpclmulqdq	zmm2, zmm0, zmm10, 0x01
	vpxorq		zmm0, zmm1, zmm2
	vpxorq		zmm0, zmm0, zmm8

	vmovdqu8	zmm9, [arg2+16*4]
	vpclmulqdq	zmm5, zmm4, zmm10, 0x10
	vpclmulqdq	zmm6, zmm4, zmm10, 0x01
	vpxorq		zmm4, zmm5, zmm6
	vpxorq		zmm4, zmm4, zmm9

	sub		arg3, 128
	jge		_fold_128_B_loop
	;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

	add     arg2, 128
	; at this point, the buffer pointer is pointing at the last y Bytes of the buffer, where 0 <= y < 128
	; the 128B of folded data is in 2 zmm registers: zmm0, zmm4

_fold_128_B_register:
	; fold the 8 128b parts into 1 xmm register with different constants
	vmovdqu8	zmm16, [rk9]		; multiply by rk9-rk16
	vmovdqu8	zmm11, [rk17]		; multiply by rk17-rk20, rk1,rk2, 0,0
	vpclmulqdq	zmm1, zmm0, zmm16, 0x01
	vpclmulqdq	zmm2, zmm0, zmm16, 0x10
	vextracti64x2	xmm7, zmm4, 3		; save last that has no multiplicand

	vpclmulqdq	zmm5, zmm4, zmm11, 0x01
	vpclmulqdq	zmm6, zmm4, zmm11, 0x10
	vmovdqa		xmm10, [rk1]		; Needed later in reduction loop
	vpternlogq	zmm1, zmm2, zmm5, 0x96	; xor ABC
	vpternlogq	zmm1, zmm6, zmm7, 0x96	; xor ABC

	vshufi64x2      zmm8, zmm1, zmm1, 0x4e ; Swap 1,0,3,2 - 01 00 11 10
	vpxorq          ymm8, ymm8, ymm1
	vextracti64x2   xmm5, ymm8, 1
	vpxorq          xmm7, xmm5, xmm8

	; instead of 128, we add 128-16 to the loop counter to save 1 instruction from the loop
	; instead of a cmp instruction, we use the negative flag with the jl instruction
	add		arg3, 128-16
	jl		_final_reduction_for_128

	; now we have 16+y bytes left to reduce. 16 Bytes is in register xmm7 and the rest is in memory
	; we can fold 16 bytes at a time if y>=16
	; continue folding 16B at a time

_16B_reduction_loop:
	vmovdqa		xmm8, xmm7
	vpclmulqdq	xmm7, xmm10, 0x1
	vpclmulqdq	xmm8, xmm10, 0x10
	vpxor		xmm7, xmm8
	vmovdqu		xmm0, [arg2]
	vpxor		xmm7, xmm0
	add		arg2, 16
	sub		arg3, 16
	; instead of a cmp instruction, we utilize the flags with the jge instruction
	; equivalent of: cmp arg3, 16-16
	; check if there is any more 16B in the buffer to be able to fold
	jge		_16B_reduction_loop

	;now we have 16+z bytes left to reduce, where 0<= z < 16.
	;first, we reduce the data in the xmm7 register


_final_reduction_for_128:
	add		arg3, 16
	je		_128_done
	; here we are getting data that is less than 16 bytes.
	; since we know that there was data before the pointer, we can offset
	; the input pointer before the actual point, to receive exactly 16 bytes.
	; after that the registers need to be adjusted.
_get_last_two_xmms:


	vmovdqa		xmm2, xmm7
	vmovdqu		xmm1, [arg2 - 16 + arg3]

	; get rid of the extra data that was loaded before
	; load the shift constant
	lea		rax, [pshufb_shf_table]
	add		rax, arg3
	vmovdqu		xmm0, [rax]


	vpshufb		xmm7, xmm0
	vpxor		xmm0, [mask3]
	vpshufb		xmm2, xmm0

	vpblendvb	xmm2, xmm2, xmm1, xmm0
	;;;;;;;;;;
	vmovdqa		xmm8, xmm7
	vpclmulqdq	xmm7, xmm10, 0x1

	vpclmulqdq	xmm8, xmm10, 0x10
	vpxor		xmm7, xmm8
	vpxor		xmm7, xmm2

_128_done:
	; compute crc of a 128-bit value
	vmovdqa		xmm10, [rk5]
	vmovdqa		xmm0, xmm7

	;64b fold
	vpclmulqdq	xmm7, xmm10, 0
	vpsrldq		xmm0, 8
	vpxor		xmm7, xmm0

	;barrett reduction
_barrett:
	vmovdqa		xmm1, xmm7
	vmovdqa		xmm10, [rk7]

	vpclmulqdq	xmm7, xmm10, 0
	vmovdqa		xmm2, xmm7
	vpclmulqdq	xmm7, xmm10, 0x10
	vpslldq		xmm2, 8
	vpxor		xmm7, xmm2
	vpxor		xmm7, xmm1
	vpextrq		rax, xmm7, 1

_cleanup:
	not		rax


%ifidn __OUTPUT_FORMAT__, win64
	vmovdqa		xmm6, [rsp + XMM_SAVE + 16*0]
	vmovdqa		xmm7, [rsp + XMM_SAVE + 16*1]
	vmovdqa		xmm8, [rsp + XMM_SAVE + 16*2]
	vmovdqa		xmm9, [rsp + XMM_SAVE + 16*3]
	vmovdqa		xmm10, [rsp + XMM_SAVE + 16*4]
	vmovdqa		xmm11, [rsp + XMM_SAVE + 16*5]
	vmovdqa		xmm12, [rsp + XMM_SAVE + 16*6]
	vmovdqa		xmm13, [rsp + XMM_SAVE + 16*7]
	vmovdqa		xmm14, [rsp + XMM_SAVE + 16*8]
	vmovdqa		xmm15, [rsp + XMM_SAVE + 16*9]
%endif
	add		rsp, VARIABLE_OFFSET
	ret

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

align 16
_less_than_256:

	; check if there is enough buffer to be able to fold 16B at a time
	cmp	arg3, 32
	jl	_less_than_32

	; if there is, load the constants
	vmovdqa	xmm10, [rk1]	; rk1 and rk2 in xmm10

	vmovq	xmm0, arg1	; get the initial crc value
	vmovdqu	xmm7, [arg2]	; load the plaintext
	vpxor	xmm7, xmm0

	; update the buffer pointer
	add	arg2, 16

	; update the counter. subtract 32 instead of 16 to save one instruction from the loop
	sub	arg3, 32

	jmp	_16B_reduction_loop

align 16
_less_than_32:
	; mov initial crc to the return value. this is necessary for zero-length buffers.
	mov	rax, arg1
	test	arg3, arg3
	je	_cleanup

	vmovq	xmm0, arg1	; get the initial crc value

	cmp	arg3, 16
	je	_exact_16_left
	jl	_less_than_16_left

	vmovdqu	xmm7, [arg2]	; load the plaintext
	vpxor	xmm7, xmm0	; xor the initial crc value
	add	arg2, 16
	sub	arg3, 16
	vmovdqa	xmm10, [rk1]    ; rk1 and rk2 in xmm10
	jmp	_get_last_two_xmms


align 16
_less_than_16_left:
	; use stack space to load data less than 16 bytes, zero-out the 16B in memory first.

	vpxor	xmm1, xmm1
	mov	r11, rsp
	vmovdqa	[r11], xmm1

	; backup the counter value
	mov	r9, arg3
	cmp	arg3, 8
	jl	_less_than_8_left

	; load 8 Bytes
	mov	rax, [arg2]
	mov	[r11], rax
	add	r11, 8
	sub	arg3, 8
	add	arg2, 8
_less_than_8_left:

	cmp	arg3, 4
	jl	_less_than_4_left

	; load 4 Bytes
	mov	eax, [arg2]
	mov	[r11], eax
	add	r11, 4
	sub	arg3, 4
	add	arg2, 4
_less_than_4_left:

	cmp	arg3, 2
	jl	_less_than_2_left

	; load 2 Bytes
	mov	ax, [arg2]
	mov	[r11], ax
	add	r11, 2
	sub	arg3, 2
	add	arg2, 2
_less_than_2_left:
	cmp	arg3, 1
	jl	_zero_left

	; load 1 Byte
	mov	al, [arg2]
	mov	[r11], al

_zero_left:
	vmovdqa	xmm7, [rsp]
	vpxor	xmm7, xmm0	; xor the initial crc value

	lea	rax,[pshufb_shf_table]

	cmp	r9, 8
	jl	_end_1to7

_end_8to15:
	vmovdqu	xmm0, [rax + r9]
	vpshufb	xmm7,xmm0
	jmp	_128_done

_end_1to7:
	; Left shift (8-length) bytes in XMM
	vmovdqu	xmm0, [rax + r9 + 8]
	vpshufb	xmm7,xmm0

	jmp	_barrett

align 16
_exact_16_left:
	vmovdqu	xmm7, [arg2]
	vpxor	xmm7, xmm0	; xor the initial crc value

	jmp	_128_done

section .data
align 32

%ifndef USE_CONSTS
; precomputed constants
rk_1: dq 0x45000000b0000000
rk_2: dq 0x6b700000f5000000
rk1:  dq 0xf500000000000001
rk2:  dq 0x6b70000000000001
rk3:  dq 0xb001000000010000
rk4:  dq 0xf501b0000001b000
rk5:  dq 0xf500000000000001
rk6:  dq 0x0000000000000000
rk7:  dq 0xb000000000000001
rk8:  dq 0xb000000000000000
rk9:  dq 0xe014514514501501
rk10: dq 0x771db6db6db71c71
rk11: dq 0xa101101101110001
rk12: dq 0x1ab1ab1ab1aab001
rk13: dq 0xf445014445000001
rk14: dq 0x6aab71daab700001
rk15: dq 0xb100010100000001
rk16: dq 0x01b001b1b0000001
rk17: dq 0xe145150000000001
rk18: dq 0x76db6c7000000001
rk19: dq 0xa011000000000001
rk20: dq 0x1b1ab00000000001

rk_1b: dq 0xf500000000000001
rk_2b: dq 0x6b70000000000001
	dq 0x0000000000000000
	dq 0x0000000000000000
%else
INCLUDE_CONSTS
%endif

pshufb_shf_table:
; use these values for shift constants for the pshufb instruction
; different alignments result in values as shown:
;       dq 0x8887868584838281, 0x008f8e8d8c8b8a89 ; shl 15 (16-1) / shr1
;       dq 0x8988878685848382, 0x01008f8e8d8c8b8a ; shl 14 (16-3) / shr2
;       dq 0x8a89888786858483, 0x0201008f8e8d8c8b ; shl 13 (16-4) / shr3
;       dq 0x8b8a898887868584, 0x030201008f8e8d8c ; shl 12 (16-4) / shr4
;       dq 0x8c8b8a8988878685, 0x04030201008f8e8d ; shl 11 (16-5) / shr5
;       dq 0x8d8c8b8a89888786, 0x0504030201008f8e ; shl 10 (16-6) / shr6
;       dq 0x8e8d8c8b8a898887, 0x060504030201008f ; shl 9  (16-7) / shr7
;       dq 0x8f8e8d8c8b8a8988, 0x0706050403020100 ; shl 8  (16-8) / shr8
;       dq 0x008f8e8d8c8b8a89, 0x0807060504030201 ; shl 7  (16-9) / shr9
;       dq 0x01008f8e8d8c8b8a, 0x0908070605040302 ; shl 6  (16-10) / shr10
;       dq 0x0201008f8e8d8c8b, 0x0a09080706050403 ; shl 5  (16-11) / shr11
;       dq 0x030201008f8e8d8c, 0x0b0a090807060504 ; shl 4  (16-12) / shr12
;       dq 0x04030201008f8e8d, 0x0c0b0a0908070605 ; shl 3  (16-13) / shr13
;       dq 0x0504030201008f8e, 0x0d0c0b0a09080706 ; shl 2  (16-14) / shr14
;       dq 0x060504030201008f, 0x0e0d0c0b0a090807 ; shl 1  (16-15) / shr15
dq 0x8786858483828100, 0x8f8e8d8c8b8a8988
dq 0x0706050403020100, 0x000e0d0c0b0a0908

mask:  dq     0xFFFFFFFFFFFFFFFF, 0x0000000000000000
mask2: dq     0xFFFFFFFF00000000, 0xFFFFFFFFFFFFFFFF
mask3: dq     0x8080808080808080, 0x8080808080808080

%else  ; Assembler doesn't understand these opcodes. Add empty symbol for windows.
%ifidn __OUTPUT_FORMAT__, win64
global no_ %+ FUNCTION_NAME
no_ %+ FUNCTION_NAME %+ :
%endif
%endif ; (AS_FEATURE_LEVEL) >= 10