Adding upstream version 2:2.6.1.upstream/2%2.6.1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 2341 insertions, 0 deletions

diff --git a/tests/compat-test b/tests/compat-test
new file mode 100755
index 0000000..6dc8004
--- /dev/null
+++ b/tests/compat-test
@@ -0,0 +1,1137 @@
+#!/bin/bash
+
+PS4='$LINENO:'
+[ -z "$CRYPTSETUP_PATH" ] && CRYPTSETUP_PATH=".."
+CRYPTSETUP=$CRYPTSETUP_PATH/cryptsetup
+CRYPTSETUP_RAW=$CRYPTSETUP
+
+CRYPTSETUP_VALGRIND=../.libs/cryptsetup
+CRYPTSETUP_LIB_VALGRIND=../.libs
+
+DIFFER=./differ
+DEV_NAME=dummy
+DEV_NAME2=dummy2
+DEV_NAME3=dummy3
+ORIG_IMG=luks-test-orig
+IMG=luks-test
+IMG10=luks-test-v10
+HEADER_IMG=luks-header
+KEY1=key1
+KEY2=key2
+KEY5=key5
+KEYE=keye
+PWD0="compatkey"
+PWD1="93R4P4pIqAH8"
+PWD2="mymJeD8ivEhE"
+PWD3="ocMakf3fAcQO"
+PWDW="rUkL4RUryBom"
+VK_FILE="compattest_vkfile"
+
+FAST_PBKDF_OPT="--pbkdf pbkdf2 --pbkdf-force-iterations 1000"
+
+LUKS_HEADER="S0-5 S6-7 S8-39 S40-71 S72-103 S104-107 S108-111 R112-131 R132-163 S164-167 S168-207 A0-591"
+KEY_SLOT0="S208-211 S212-215 R216-247 A248-251 A251-255"
+KEY_MATERIAL0="R4096-68096"
+KEY_MATERIAL0_EXT="R4096-68096"
+
+KEY_SLOT1="S256-259 S260-263 R264-295 A296-299 A300-303"
+KEY_MATERIAL1="R69632-133632"
+KEY_MATERIAL1_EXT="S69632-133632"
+
+KEY_SLOT5="S448-451 S452-455 R456-487 A488-491 A492-495"
+KEY_MATERIAL5="R331776-395264"
+KEY_MATERIAL5_EXT="S331776-395264"
+
+TEST_UUID="12345678-1234-1234-1234-123456789abc"
+
+LOOPDEV=$(losetup -f 2>/dev/null)
+FIPS_MODE=$(cat /proc/sys/crypto/fips_enabled 2>/dev/null)
+
+function remove_mapping()
+{
+	[ -b /dev/mapper/$DEV_NAME3 ] && dmsetup remove --retry $DEV_NAME3 >/dev/null 2>&1
+	[ -b /dev/mapper/$DEV_NAME2 ] && dmsetup remove --retry $DEV_NAME2 >/dev/null 2>&1
+	[ -b /dev/mapper/$DEV_NAME ] && dmsetup remove --retry $DEV_NAME >/dev/null 2>&1
+	losetup -d $LOOPDEV >/dev/null 2>&1
+	rm -f $ORIG_IMG $IMG $IMG10 $KEY1 $KEY2 $KEY5 $KEYE $HEADER_IMG $VK_FILE missing-file >/dev/null 2>&1
+	rmmod scsi_debug >/dev/null 2>&1
+	scsi_debug_teardown $DEV
+}
+
+function force_uevent()
+{
+	DNAME=$(echo $LOOPDEV | cut -f3 -d /)
+	echo "change" >/sys/block/$DNAME/uevent
+}
+
+function fail()
+{
+	[ -n "$1" ] && echo "$1"
+	remove_mapping
+	echo "FAILED backtrace:"
+	while caller $frame; do ((frame++)); done
+	exit 2
+}
+
+function fips_mode()
+{
+	[ -n "$FIPS_MODE" ] && [ "$FIPS_MODE" -gt 0 ]
+}
+
+function can_fail_fips()
+{
+	# Ignore this fail if running in FIPS mode
+	fips_mode || fail $1
+}
+
+function skip()
+{
+	[ -n "$1" ] && echo "$1"
+	remove_mapping
+	[ -n "$2" ] && exit $2
+	exit 77
+}
+
+function prepare()
+{
+	[ -b /dev/mapper/$DEV_NAME ] && dmsetup remove --retry $DEV_NAME >/dev/null 2>&1
+
+	case "$2" in
+	file)
+		remove_mapping
+		dd if=/dev/zero of=$IMG bs=1k count=10000 >/dev/null 2>&1
+		sync
+		;;
+	wipe)
+		remove_mapping
+		dd if=/dev/zero of=$IMG bs=1k count=10000 >/dev/null 2>&1
+		sync
+		losetup $LOOPDEV $IMG
+		;;
+	new)
+		remove_mapping
+		xz -cd compatimage.img.xz > $IMG
+		# FIXME: switch to internal loop (no losetup at all)
+		echo "bad" | $CRYPTSETUP luksOpen --key-slot 0 --test-passphrase $IMG 2>&1 | \
+			grep "autoclear flag" && skip "WARNING: Too old kernel, test skipped."
+		losetup $LOOPDEV $IMG
+		xz -cd compatv10image.img.xz > $IMG10
+		;;
+	reuse | *)
+		if [ ! -e $IMG ]; then
+			xz -cd compatimage.img.xz > $IMG
+			losetup $LOOPDEV $IMG
+		fi
+		[ ! -e $IMG10 ] && xz -cd compatv10image.img.xz > $IMG10
+		;;
+	esac
+
+	if [ ! -e $KEY1 ]; then
+		#dd if=/dev/urandom of=$KEY1 count=1 bs=32 >/dev/null 2>&1
+		echo -n $'\x48\xc6\x74\x4f\x41\x4e\x50\xc0\x79\xc2\x2d\x5b\x5f\x68\x84\x17' >$KEY1
+		echo -n $'\x9c\x03\x5e\x1b\x4d\x0f\x9a\x75\xb3\x90\x70\x32\x0a\xf8\xae\xc4'>>$KEY1
+	fi
+
+	if [ ! -e $KEY2 ]; then
+		dd if=/dev/urandom of=$KEY2 count=1 bs=16 >/dev/null 2>&1
+	fi
+
+	if [ ! -e $KEY5 ]; then
+		dd if=/dev/urandom of=$KEY5 count=1 bs=16 >/dev/null 2>&1
+	fi
+
+	if [ ! -e $KEYE ]; then
+		touch $KEYE
+	fi
+
+	cp $IMG $ORIG_IMG
+	[ -n "$1" ] && echo "CASE: $1"
+}
+
+function check()
+{
+	sync
+	[ -z "$1" ] && return
+	$DIFFER $ORIG_IMG $IMG $1 || fail
+}
+
+function check_exists()
+{
+	[ -b /dev/mapper/$DEV_NAME ] || fail
+	check $1
+}
+
+# $1 path to scsi debug bdev
+scsi_debug_teardown() {
+	local _tries=15;
+
+	while [ -b "$1" -a $_tries -gt 0 ]; do
+		rmmod scsi_debug >/dev/null 2>&1
+		if [ -b "$1" ]; then
+			sleep .1
+			_tries=$((_tries-1))
+		fi
+	done
+
+	test ! -b "$1" || rmmod scsi_debug >/dev/null 2>&1
+}
+
+function add_scsi_device() {
+	scsi_debug_teardown $DEV
+	if [ -d /sys/module/scsi_debug ] ; then
+		echo "Cannot use scsi_debug module (in use or compiled-in), test skipped."
+		exit 77
+	fi
+	modprobe scsi_debug $@ delay=0 >/dev/null 2>&1
+	if [ $? -ne 0 ] ; then
+		echo "This kernel seems to not support proper scsi_debug module, test skipped."
+		exit 77
+	fi
+
+	sleep 1
+	DEV="/dev/"$(grep -l -e scsi_debug /sys/block/*/device/model | cut -f4 -d /)
+	[ -b $DEV ] || fail "Cannot find $DEV."
+}
+
+function valgrind_setup()
+{
+	[ -n "$VALG" ] || return
+	command -v valgrind >/dev/null || fail "Cannot find valgrind."
+	[ ! -f $CRYPTSETUP_VALGRIND ] && fail "Unable to get location of cryptsetup executable."
+	export LD_LIBRARY_PATH="$CRYPTSETUP_LIB_VALGRIND:$LD_LIBRARY_PATH"
+	CRYPTSETUP=valgrind_run
+	CRYPTSETUP_RAW="./valg.sh ${CRYPTSETUP_VALGRIND}"
+}
+
+function valgrind_run()
+{
+	export INFOSTRING="$(basename ${BASH_SOURCE[1]})-line-${BASH_LINENO[0]}"
+	$CRYPTSETUP_RAW "$@"
+}
+
+function expect_run()
+{
+	export INFOSTRING="$(basename ${BASH_SOURCE[1]})-line-${BASH_LINENO[0]}"
+	expect "$@"
+}
+
+export LANG=C
+
+[ ! -x "$CRYPTSETUP" ] && skip "Cannot find $CRYPTSETUP, test skipped."
+valgrind_setup
+
+# LUKS non-root-tests
+if [ $(id -u) != 0 ]; then
+	$CRYPTSETUP benchmark -c aes-xts-plain64 >/dev/null 2>&1 || \
+		skip "WARNING: Cannot run test without kernel userspace crypto API, test skipped."
+fi
+
+prepare "Image in file tests (root capabilities not required)" file
+echo "[1] format"
+echo $PWD1 | $CRYPTSETUP luksFormat --type luks1 $IMG $FAST_PBKDF_OPT || fail
+echo "[2] open"
+echo $PWD0 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
+[ $? -ne 2 ] && fail "luksOpen should return EPERM exit code"
+echo $PWD1 | $CRYPTSETUP luksOpen $IMG --test-passphrase || fail
+# test detached header --test-passphrase
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --header $HEADER_IMG $IMG || fail
+echo $PWD1 | $CRYPTSETUP open --test-passphrase $HEADER_IMG || fail
+rm -f $HEADER_IMG
+echo "[3] add key"
+echo $PWD1 | $CRYPTSETUP luksAddKey $IMG $FAST_PBKDF_OPT 2>/dev/null && fail
+echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $IMG $FAST_PBKDF_OPT || fail
+echo -e "$PWD0\n$PWD1" | $CRYPTSETUP luksAddKey $IMG $FAST_PBKDF_OPT 2>/dev/null && fail
+echo "[4] change key"
+echo -e "$PWD1\n$PWD0\n" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT $IMG || fail
+echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT $IMG 2>/dev/null && fail
+[ $? -ne 2 ] && fail "luksChangeKey should return EPERM exit code"
+echo "[5] remove key"
+# delete active keys PWD0, PWD2
+echo $PWD1 | $CRYPTSETUP luksRemoveKey $IMG 2>/dev/null && fail
+[ $? -ne 2 ] && fail "luksRemove should return EPERM exit code"
+echo $PWD0 | $CRYPTSETUP luksRemoveKey $IMG || fail
+echo $PWD2 | $CRYPTSETUP luksRemoveKey $IMG || fail
+# check if keys were deleted
+echo $PWD0 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
+[ $? -ne 1 ] && fail "luksOpen should return ENOENT exit code"
+echo $PWD2 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
+[ $? -ne 1 ] && fail "luksOpen should return ENOENT exit code"
+echo "[6] kill slot"
+# format new luks device with active keys PWD1, PWD2
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $IMG $FAST_PBKDF_OPT || fail
+echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $IMG $FAST_PBKDF_OPT || fail
+# deactivate keys by killing slots
+$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 0: ENABLED" || fail
+$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 1: ENABLED" || fail
+$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 2: DISABLED" || fail
+echo $PWD1 | $CRYPTSETUP -q luksKillSlot $IMG 0 2>/dev/null && fail
+echo $PWD2 | $CRYPTSETUP -q luksKillSlot $IMG 0 || fail
+$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 0: DISABLED" || fail
+echo $PWD1 | $CRYPTSETUP -q luksKillSlot $IMG 1 2>/dev/null && fail
+[ $? -ne 2 ] && fail "luksKill should return EPERM exit code"
+echo $PWD2 | $CRYPTSETUP -q luksKillSlot $IMG 1 || fail
+$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 1: DISABLED" || fail
+# check if keys were deactivated
+echo $PWD1 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
+echo $PWD2 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
+echo "[7] header backup"
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $IMG $FAST_PBKDF_OPT || fail
+$CRYPTSETUP luksHeaderBackup $IMG --header-backup-file $HEADER_IMG || fail
+echo $PWD1 | $CRYPTSETUP luksRemoveKey $IMG || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail
+echo "[8] header restore"
+$CRYPTSETUP luksHeaderRestore -q $IMG --header-backup-file $HEADER_IMG || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $IMG --test-passphrase || fail
+echo "[9] luksDump"
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid $TEST_UUID $IMG $KEY1 || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $IMG -d $KEY1 || fail
+$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 0: ENABLED" || fail
+$CRYPTSETUP luksDump $IMG | grep -q $TEST_UUID || fail
+echo $PWDW | $CRYPTSETUP luksDump $IMG --dump-volume-key 2>/dev/null && fail
+echo $PWDW | $CRYPTSETUP luksDump $IMG --dump-master-key 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksDump $IMG --dump-volume-key | grep -q "MK dump:" || fail
+echo $PWD1 | $CRYPTSETUP luksDump $IMG --dump-master-key | grep -q "MK dump:" || fail
+$CRYPTSETUP luksDump -q $IMG --dump-volume-key -d $KEY1 | grep -q "MK dump:" || fail
+echo $PWD1 | $CRYPTSETUP luksDump -q $IMG --dump-master-key --master-key-file $VK_FILE >/dev/null || fail
+rm -f $VK_FILE
+echo $PWD1 | $CRYPTSETUP luksDump -q $IMG --dump-volume-key --volume-key-file $VK_FILE >/dev/null || fail
+echo $PWD1 | $CRYPTSETUP luksDump -q $IMG --dump-volume-key --volume-key-file $VK_FILE 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --volume-key-file $VK_FILE $IMG || fail
+
+echo "[10] uuid"
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid $TEST_UUID $IMG || fail
+$CRYPTSETUP -q luksUUID $IMG | grep -q $TEST_UUID || fail
+
+[ $(id -u) != 0 ] && skip "WARNING: You must be root to run this test, test skipped."
+[ -z "$LOOPDEV" ] && skip "WARNING: Cannot find free loop device, test skipped."
+[ ! -x "$DIFFER" ] && skip "Cannot find $DIFFER, test skipped."
+
+# LUKS root-tests
+prepare	"[1] open - compat image - acceptance check" new
+echo $PWD0 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+check_exists
+ORG_SHA256=$(sha256sum -b /dev/mapper/$DEV_NAME | cut -f 1 -d' ')
+[ "$ORG_SHA256" = 7428e8f2436882a07eb32765086f5c899474c08b5576f556b573d2aabdf923e8 ] || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+
+# Check it can be opened from header backup as well
+$CRYPTSETUP luksHeaderBackup $IMG --header-backup-file $HEADER_IMG || fail
+echo $PWD0 | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME --header $HEADER_IMG || fail
+check_exists
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+# Check restore
+$CRYPTSETUP luksHeaderRestore -q $IMG --header-backup-file $HEADER_IMG || fail
+
+# Repeat for V1.0 header - not aligned first keyslot
+if [ ! fips_mode ] ; then
+echo $PWD0 | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME || fail
+check_exists
+ORG_SHA1=$(sha1sum -b /dev/mapper/$DEV_NAME | cut -f 1 -d' ')
+[ "$ORG_SHA1" = 51b48c2471a7593ceaf14dc5e66bca86ed05f6cc ] || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+
+rm -f $HEADER_IMG
+$CRYPTSETUP luksHeaderBackup $IMG10 --header-backup-file $HEADER_IMG
+echo $PWD0 | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME --header $HEADER_IMG || fail
+check_exists
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+fi
+
+prepare "[2] open - compat image - denial check" new
+echo $PWDW | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+echo $PWDW | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME 2>/dev/null && fail
+check
+
+# All headers items and first key material section must change
+prepare "[3] format" wipe
+echo $PWD1 | $CRYPTSETUP -i 1000 -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks1 $LOOPDEV || fail
+check "$LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0"
+
+prepare "[4] format using hash sha512" wipe
+echo $PWD1 | $CRYPTSETUP -i 1000 -h sha512 -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks1 $LOOPDEV || fail
+check "$LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0"
+
+prepare "[5] open"
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase || fail
+echo $PWDW | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+check_exists
+
+# Key Slot 1 and key material section 1 must change, the rest must not.
+prepare "[6] add key"
+echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $LOOPDEV || fail
+check "$KEY_SLOT1 $KEY_MATERIAL1"
+echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+
+# Unsuccessful Key Delete - nothing may change
+prepare "[7] unsuccessful delete"
+echo $PWDW | $CRYPTSETUP luksKillSlot $LOOPDEV 1 2>/dev/null && fail
+$CRYPTSETUP -q luksKillSlot $LOOPDEV 8 2>/dev/null && fail
+$CRYPTSETUP -q luksKillSlot $LOOPDEV 7 2>/dev/null && fail
+check
+
+# Delete Key Test
+# Key Slot 1 and key material section 1 must change, the rest must not
+prepare "[8] successful delete"
+$CRYPTSETUP -q luksKillSlot $LOOPDEV 1 || fail
+check "$KEY_SLOT1 $KEY_MATERIAL1_EXT"
+echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2> /dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+
+# Key Slot 1 and key material section 1 must change, the rest must not
+prepare "[9] add key test for key files"
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV $KEY1 || fail
+check "$KEY_SLOT1 $KEY_MATERIAL1"
+$CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail
+
+# Key Slot 1 and key material section 1 must change, the rest must not
+prepare "[10] delete key test with key1 as remaining key"
+$CRYPTSETUP -d $KEY1 luksKillSlot $LOOPDEV 0 || fail
+check "$KEY_SLOT0 $KEY_MATERIAL0_EXT"
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail
+
+# Delete last slot
+prepare "[11] delete last key" wipe
+echo $PWD1 | $CRYPTSETUP luksFormat --type luks1 $LOOPDEV $FAST_PBKDF_OPT || fail
+echo $PWD1 | $CRYPTSETUP luksKillSlot $LOOPDEV 0 || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+
+# Format test for ESSIV, and some other parameters.
+prepare "[12] parameter variation test" wipe
+$CRYPTSETUP -q -i 1000 -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks1 $LOOPDEV $KEY1 || fail
+check "$LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0"
+$CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail
+
+prepare	"[13] open/close - stacked devices" wipe
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $LOOPDEV $FAST_PBKDF_OPT || fail
+echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 /dev/mapper/$DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME2 || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+
+prepare	"[14] format/open - passphrase on stdin & new line" wipe
+# stdin defined by "-" must take even newline
+#echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksFormat $LOOPDEV - || fail
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q --key-file=- luksFormat --type luks1 $LOOPDEV || fail
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+# now also try --key-file
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q luksFormat --type luks1 $LOOPDEV --key-file=- || fail
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+# process newline if from stdin
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q luksFormat --type luks1 $LOOPDEV || fail
+echo "$PWD1" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+
+prepare "[15] UUID - use and report provided UUID" wipe
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid blah $LOOPDEV 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid $TEST_UUID $LOOPDEV || fail
+tst=$($CRYPTSETUP -q luksUUID $LOOPDEV)
+[ "$tst"x = "$TEST_UUID"x ] || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV || fail
+$CRYPTSETUP -q luksUUID --uuid $TEST_UUID $LOOPDEV || fail
+tst=$($CRYPTSETUP -q luksUUID $LOOPDEV)
+[ "$tst"x = "$TEST_UUID"x ] || fail
+
+prepare "[16] luksFormat" wipe
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --volume-key-file /dev/urandom $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --volume-key-file /dev/urandom $LOOPDEV -d $KEY1 || fail
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --volume-key-file /dev/urandom -s 256 --uuid $TEST_UUID $LOOPDEV $KEY1 || fail
+$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+# open by UUID
+if [ -d /dev/disk/by-uuid ] ; then
+	force_uevent # some systems do not update loop by-uuid
+	$CRYPTSETUP luksOpen -d $KEY1 UUID=X$TEST_UUID $DEV_NAME 2>/dev/null && fail
+	$CRYPTSETUP luksOpen -d $KEY1 UUID=$TEST_UUID $DEV_NAME || fail
+	$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+fi
+# skip tests using empty passphrase
+if [ ! fips_mode ]; then
+# empty keyfile
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEYE || fail
+$CRYPTSETUP luksOpen -d $KEYE $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+fi
+# open by volume key
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT -s 256 --volume-key-file $KEY1 $LOOPDEV || fail
+$CRYPTSETUP luksOpen --volume-key-file /dev/urandom $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP luksOpen --volume-key-file $KEY1 $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+# unsupported pe-keyslot encryption
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT -s 128 --keyslot-cipher "aes-cbc-plain" $LOOPDEV 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT -s 128 --keyslot-key-size 256 $LOOPDEV 2>/dev/null && fail
+
+prepare "[17] AddKey volume key, passphrase and keyfile" wipe
+# volumekey
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --volume-key-file /dev/zero --key-slot 3 || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: ENABLED" || fail
+echo $PWD2 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --volume-key-file /dev/zero --key-slot 4 || fail
+echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 4 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 4: ENABLED" || fail
+echo $PWD3 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --volume-key-file /dev/null --key-slot 5 2>/dev/null && fail
+$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --volume-key-file /dev/zero --key-slot 5 $KEY1 || fail
+$CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 5 -d $KEY1 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: ENABLED" || fail
+
+# special "-" handling
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 3 || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 - || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d - --test-passphrase || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d - $KEY2 || fail
+$CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d - -d $KEY1 --test-passphrase 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d $KEY1 -d $KEY1 --test-passphrase 2>/dev/null && fail
+
+# [0]PWD1 [1]PWD2 [2]$KEY1/1 [3]$KEY1 [4]$KEY2
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 3 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: ENABLED" || fail
+$CRYPTSETUP luksAddKey -q $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 3 2>/dev/null && fail
+# keyfile/keyfile
+$CRYPTSETUP luksAddKey -q $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 4 || fail
+$CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase --key-slot 4 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 4: ENABLED" || fail
+# passphrase/keyfile
+echo $PWD1 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 --key-slot 0 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: ENABLED" || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 0 || fail
+# passphrase/passphrase
+echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --key-slot 1 || fail
+echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 1 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: ENABLED" || fail
+# keyfile/passphrase
+echo -e "$PWD2\n" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 2 --new-keyfile-size 8 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 2: ENABLED" || fail
+
+prepare "[18] RemoveKey passphrase and keyfile" reuse
+$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: DISABLED" || fail
+$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 2>/dev/null && fail
+$CRYPTSETUP luksAddKey -q $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 $KEY1 --key-slot 3 2>/dev/null || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: ENABLED" || fail
+$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 --keyfile-size 1 2>/dev/null && fail
+$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 4: DISABLED" || fail
+# if password or keyfile is provided, batch mode must not suppress it
+echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 2>/dev/null && fail
+echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 -q 2>/dev/null && fail
+echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 --key-file=- 2>/dev/null && fail
+echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 --key-file=- -q 2>/dev/null && fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 2: ENABLED" || fail
+# kill slot using passphrase from 1
+echo $PWD2 | $CRYPTSETUP luksKillSlot $LOOPDEV 2 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 2: DISABLED" || fail
+# kill slot with redirected stdin
+$CRYPTSETUP luksKillSlot $LOOPDEV 3 </dev/null 2>/dev/null || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: DISABLED" || fail
+# remove key0 / slot 0
+echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: DISABLED" || fail
+# last keyslot, in batch mode no passphrase needed...
+$CRYPTSETUP luksKillSlot -q $LOOPDEV 1 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: DISABLED" || fail
+
+prepare "[19] create & status & resize" wipe
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash xxx 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha256 --cipher aes-cbc-essiv:sha256 --offset 3 --skip 4 --readonly || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "offset:" | grep -q "3 sectors" || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "skipped:" | grep -q "4 sectors" || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "mode:" | grep -q "readonly" || fail
+$CRYPTSETUP -q resize  $DEV_NAME --size 100 || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
+$CRYPTSETUP -q resize  $DEV_NAME || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "19997 sectors" || fail
+$CRYPTSETUP -q resize  $DEV_NAME --device-size 1M || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail
+$CRYPTSETUP -q resize  $DEV_NAME --device-size 512k --size 1023 >/dev/null 2>&1 && fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail
+$CRYPTSETUP -q resize  $DEV_NAME --device-size 513 >/dev/null 2>&1 && fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail
+# Resize underlying loop device as well
+truncate -s 16M $IMG || fail
+$CRYPTSETUP -q resize  $DEV_NAME || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "32765 sectors" || fail
+$CRYPTSETUP -q remove  $DEV_NAME || fail
+$CRYPTSETUP -q status  $DEV_NAME >/dev/null && fail
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha256 $LOOPDEV || fail
+$CRYPTSETUP -q remove  $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP -q create $DEV_NAME --hash sha256 $LOOPDEV || fail
+$CRYPTSETUP -q remove  $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP -q create $DEV_NAME --hash sha256 --size 100 $LOOPDEV || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
+$CRYPTSETUP -q remove  $DEV_NAME || fail
+# 4k sector resize (if kernel supports it)
+echo $PWD1 | $CRYPTSETUP -q open --type plain --hash sha256 $LOOPDEV $DEV_NAME --sector-size 4096 --size 8  >/dev/null 2>&1
+if [ $? -eq 0 ] ; then
+	$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "8 sectors" || fail
+	$CRYPTSETUP -q resize  $DEV_NAME --size 16 || fail
+	$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "16 sectors" || fail
+	$CRYPTSETUP -q resize  $DEV_NAME --size 9 2>/dev/null && fail
+	$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "16 sectors" || fail
+	$CRYPTSETUP -q resize  $DEV_NAME --device-size 4608 2>/dev/null && fail
+	$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "16 sectors" || fail
+	$CRYPTSETUP -q remove  $DEV_NAME || fail
+fi
+# Resize not aligned to logical block size
+add_scsi_device dev_size_mb=32 sector_size=4096
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha256 $DEV || fail
+OLD_SIZE=$($CRYPTSETUP status $DEV_NAME | grep "^ \+size:" | sed 's/.* \([0-9]\+\) .*/\1/')
+$CRYPTSETUP resize $DEV_NAME -b 7 2> /dev/null && fail
+dmsetup info $DEV_NAME | grep -q SUSPENDED && fail
+NEW_SIZE=$($CRYPTSETUP status $DEV_NAME | grep "^ \+size:" | sed 's/.* \([0-9]\+\) .*/\1/')
+test $OLD_SIZE -eq $NEW_SIZE || fail
+$CRYPTSETUP close $DEV_NAME || fail
+# Add check for unaligned plain crypt activation
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha256 $DEV -b 7 2>/dev/null && fail
+$CRYPTSETUP status $DEV_NAME >/dev/null 2>&1 && fail
+# verify is ignored on non-tty input
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha256 --verify-passphrase 2>/dev/null || fail
+$CRYPTSETUP -q remove  $DEV_NAME || fail
+$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 --key-size 255 2>/dev/null && fail
+$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 --key-size -1 2>/dev/null && fail
+$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 -l -1 2>/dev/null && fail
+$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1  || fail
+$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 2>/dev/null && fail
+$CRYPTSETUP create $DEV_NAME $LOOPDEV -d blah 2>/dev/null && fail
+$CRYPTSETUP -q remove  $DEV_NAME || fail
+$CRYPTSETUP create $DEV_NAME $LOOPDEV -d /dev/urandom || fail
+$CRYPTSETUP -q remove  $DEV_NAME || fail
+
+prepare "[20] Disallow open/create if already mapped." wipe
+$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 || fail
+$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 2>/dev/null && fail
+$CRYPTSETUP create $DEV_NAME2 $LOOPDEV -d $KEY1 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $LOOPDEV 2>/dev/null && fail
+$CRYPTSETUP remove  $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME2 2>/dev/null && fail
+$CRYPTSETUP  luksClose  $DEV_NAME || fail
+
+prepare "[21] luksDump" wipe
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid $TEST_UUID $LOOPDEV $KEY1 || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: ENABLED" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q $TEST_UUID || fail
+echo $PWDW | $CRYPTSETUP luksDump $LOOPDEV --dump-volume-key 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksDump $LOOPDEV --dump-volume-key | grep -q "MK dump:" || fail
+$CRYPTSETUP luksDump -q $LOOPDEV --dump-volume-key -d $KEY1 | grep -q "MK dump:" || fail
+echo $PWD1 | $CRYPTSETUP luksDump -q $LOOPDEV --dump-volume-key --volume-key-file $VK_FILE > /dev/null || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --volume-key-file $VK_FILE $LOOPDEV || fail
+
+prepare "[22] remove disappeared device" wipe
+dmsetup create $DEV_NAME --table "0 5000 linear $LOOPDEV 2" || fail
+echo $PWD1 | $CRYPTSETUP -q $FAST_PBKDF_OPT luksFormat --type luks1 /dev/mapper/$DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail
+# underlying device now returns error but node is still present
+dmsetup load $DEV_NAME --table "0 5000 error" || fail
+dmsetup resume $DEV_NAME || fail
+$CRYPTSETUP -q luksClose $DEV_NAME2 || fail
+dmsetup remove --retry $DEV_NAME || fail
+
+prepare "[23] ChangeKey passphrase and keyfile" wipe
+# [0]$KEY1 [1]key0
+$CRYPTSETUP -q luksFormat --type luks1 $LOOPDEV $KEY1 $FAST_PBKDF_OPT --key-slot 0 || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey -q $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 --key-slot 1 || fail
+# keyfile [0] / keyfile [0]
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 0 || fail
+# passphrase [1] / passphrase [1]
+echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT --key-slot 1 || fail
+# keyfile [0] / keyfile [new]
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 $KEY1 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: DISABLED" || fail
+# passphrase [1] / passphrase [new]
+echo -e "$PWD2\n$PWD1\n" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT $LOOPDEV || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: DISABLED" || fail
+# use all slots
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail
+# still allows replace
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 || fail
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 2>/dev/null && fail
+
+prepare "[24] Keyfile limit" wipe
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 0 -l 13 || fail
+$CRYPTSETUP --key-file=$KEY1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=$KEY1 -l 0 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=$KEY1 -l -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=$KEY1 -l 14 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=$KEY1 -l 13 luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksClose  $DEV_NAME || fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT 2>/dev/null && fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 14 2>/dev/null && fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l -1 2>/dev/null && fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 13 --new-keyfile-size 12 || fail
+$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 2>/dev/null && fail
+$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 -l 12 || fail
+$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT 2>/dev/null && fail
+$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 14 2>/dev/null && fail
+$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 13 || fail
+# -l is ignored for stdin if _only_ passphrase is used
+echo $PWD1 | $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY2 $FAST_PBKDF_OPT || fail
+# this is stupid, but expected
+echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 11 2>/dev/null && fail
+echo $PWDW"0" | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 12 2>/dev/null && fail
+echo -e "$PWD1\n" | $CRYPTSETUP luksRemoveKey $LOOPDEV -d- -l 12 || fail
+# offset
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 0 -l 13 --keyfile-offset 16 || fail
+$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 15 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 16 luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksClose  $DEV_NAME || fail
+$CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 -l 13 --keyfile-offset 16 $KEY2 --new-keyfile-offset 1 || fail
+$CRYPTSETUP --key-file=$KEY2 --keyfile-offset 11 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=$KEY2 --keyfile-offset 1 luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksClose  $DEV_NAME || fail
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 --keyfile-offset 1 $KEY2 --new-keyfile-offset 0 || fail
+$CRYPTSETUP luksOpen -d $KEY2 $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksClose $DEV_NAME || fail
+# large device with keyfile
+echo -e '0 10000000 error'\\n'10000000 1000000 zero' | dmsetup create $DEV_NAME2 || fail
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV /dev/mapper/$DEV_NAME2 -l 13 --keyfile-offset 5120000000 || fail
+$CRYPTSETUP --key-file=/dev/mapper/$DEV_NAME2 -l 13 --keyfile-offset 5119999999 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=/dev/mapper/$DEV_NAME2 -l 13 --keyfile-offset 5120000000 luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksClose $DEV_NAME || fail
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d /dev/mapper/$DEV_NAME2 \
+  --keyfile-offset 5120000000 -l 13 /dev/mapper/$DEV_NAME2 --new-keyfile-offset 5120000001 --new-keyfile-size 15 || fail
+dmsetup remove --retry $DEV_NAME2
+
+prepare "[25] Create shared segments" wipe
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV  --hash sha256 --offset   0 --size 256 || fail
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME2 $LOOPDEV --hash sha256 --offset 512 --size 256 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME2 $LOOPDEV --hash sha256 --offset 512 --size 256 --shared || fail
+$CRYPTSETUP -q remove  $DEV_NAME2 || fail
+$CRYPTSETUP -q remove  $DEV_NAME || fail
+
+prepare "[26] Suspend/Resume" wipe
+# only LUKS is supported
+echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha256 $LOOPDEV || fail
+$CRYPTSETUP luksSuspend $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP -q remove  $DEV_NAME || fail
+$CRYPTSETUP luksSuspend $DEV_NAME 2>/dev/null && fail
+# LUKS
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksSuspend $DEV_NAME || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep -q "(suspended)" || fail
+$CRYPTSETUP -q resize  $DEV_NAME 2>/dev/null && fail
+echo $PWDW | $CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail
+[ $? -ne 2 ] && fail "luksResume should return EPERM exit code"
+echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME  || fail
+$CRYPTSETUP -q luksClose $DEV_NAME || fail
+# skip tests using empty passphrase
+if [ ! fips_mode ]; then
+echo | $CRYPTSETUP -q luksFormat -c null $FAST_PBKDF_OPT --type luks1 $LOOPDEV || fail
+echo | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksSuspend $DEV_NAME || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep -q "(suspended)" || fail
+echo | $CRYPTSETUP luksResume $DEV_NAME || fail
+$CRYPTSETUP -q luksClose $DEV_NAME || fail
+fi
+
+prepare "[27] luksOpen/luksResume with specified key slot number" wipe
+# first, let's try passphrase option
+echo $PWD3 | $CRYPTSETUP luksFormat --type luks1 $FAST_PBKDF_OPT -S 5 $LOOPDEV || fail
+check $LUKS_HEADER $KEY_SLOT5 $KEY_MATERIAL5
+echo $PWD3 | $CRYPTSETUP luksOpen -S 4 $LOOPDEV $DEV_NAME 2>/dev/null && fail
+[ -b /dev/mapper/$DEV_NAME ] && fail
+echo $PWD3 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME || fail
+check_exists
+$CRYPTSETUP luksSuspend $DEV_NAME || fail
+echo $PWD3 | $CRYPTSETUP luksResume -S 4 $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP -q status $DEV_NAME | grep -q "(suspended)" || fail
+echo $PWD3 | $CRYPTSETUP luksResume -S 5 $DEV_NAME || fail
+$CRYPTSETUP luksClose $DEV_NAME || fail
+echo -e "$PWD3\n$PWD1" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 0 $LOOPDEV || fail
+check $LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0
+echo $PWD3 | $CRYPTSETUP luksOpen -S 0 $LOOPDEV $DEV_NAME 2>/dev/null && fail
+[ -b /dev/mapper/$DEV_NAME ] && fail
+echo $PWD1 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME 2>/dev/null && fail
+[ -b /dev/mapper/$DEV_NAME ] && fail
+# second, try it with keyfiles
+$CRYPTSETUP luksFormat --type luks1 -q -S 5 -d $KEY5 $LOOPDEV || fail
+check $LUKS_HEADER $KEY_SLOT5 $KEY_MATERIAL5
+$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail
+check $LUKS_HEADER $KEY_SLOT1 $KEY_MATERIAL1
+$CRYPTSETUP luksOpen -S 5 -d $KEY5 $LOOPDEV $DEV_NAME || fail
+check_exists
+$CRYPTSETUP luksSuspend $DEV_NAME || fail
+$CRYPTSETUP luksResume -S 1 -d $KEY5 $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP -q status $DEV_NAME | grep -q "(suspended)" || fail
+$CRYPTSETUP luksResume -S 5 -d $KEY5 $DEV_NAME || fail
+$CRYPTSETUP luksClose $DEV_NAME || fail
+$CRYPTSETUP luksOpen -S 1 -d $KEY5 $LOOPDEV $DEV_NAME 2>/dev/null && fail
+[ -b /dev/mapper/$DEV_NAME ] && fail
+$CRYPTSETUP luksOpen -S 5 -d $KEY1 $LOOPDEV $DEV_NAME 2>/dev/null && fail
+[ -b /dev/mapper/$DEV_NAME ] && fail
+
+prepare "[28] Detached LUKS header" wipe
+echo $PWD1 | $CRYPTSETUP luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG || fail
+echo $PWD1 | $CRYPTSETUP luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --align-payload 1 >/dev/null 2>&1 && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --align-payload 8192 || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --align-payload 0 || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --align-payload 8192 --offset 8192 >/dev/null 2>&1 && fail
+truncate -s 4096 $HEADER_IMG
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG -S7 >/dev/null 2>&1 || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --offset 80000 >/dev/null 2>&1 || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --offset 8192 || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --offset 0 || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV-missing --header $HEADER_IMG $DEV_NAME 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail
+$CRYPTSETUP -q resize  $DEV_NAME --size 100 --header $HEADER_IMG || fail
+$CRYPTSETUP -q status  $DEV_NAME --header $HEADER_IMG | grep "size:" | grep -q "100 sectors" || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "type:" | grep -q "n/a" || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
+$CRYPTSETUP luksSuspend $DEV_NAME --header $HEADER_IMG || fail
+echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail
+$CRYPTSETUP luksSuspend $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail
+$CRYPTSETUP luksClose $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 5 _fakedev_ --header $HEADER_IMG $KEY5 || fail
+$CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "Key Slot 5: ENABLED" || fail
+$CRYPTSETUP luksKillSlot -q _fakedev_ --header $HEADER_IMG 5 || fail
+$CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "Key Slot 5: DISABLED" || fail
+echo $PWD1 | $CRYPTSETUP open --test-passphrase $HEADER_IMG || fail
+
+prepare "[29] Repair metadata" wipe
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 0 || fail
+# second sector overwrite should corrupt keyslot 6+7
+dd if=/dev/urandom of=$LOOPDEV bs=512 seek=1 count=1 >/dev/null 2>&1
+$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME >/dev/null 2>&1 && fail
+$CRYPTSETUP -q repair $LOOPDEV >/dev/null 2>&1 || fail
+$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksClose $DEV_NAME || fail
+# fix ecb-plain
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --hash sha256 -c aes-ecb || fail
+echo -n "ecb-xxx" | dd of=$LOOPDEV bs=1 seek=40 >/dev/null 2>&1
+$CRYPTSETUP -q repair $LOOPDEV >/dev/null 2>&1 || fail
+$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksClose $DEV_NAME || fail
+# fix uppercase hash
+echo -n "SHA256" | dd of=$LOOPDEV bs=1 seek=72 >/dev/null 2>&1
+$CRYPTSETUP -q repair $LOOPDEV >/dev/null 2>&1 || fail
+$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksClose $DEV_NAME || fail
+
+prepare "[30] LUKS erase" wipe
+$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY5 --key-slot 5 || fail
+$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: ENABLED" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: ENABLED" || fail
+$CRYPTSETUP luksErase -q $LOOPDEV || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: DISABLED" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: DISABLED" || fail
+
+prepare "[31] Deferred removal of device" wipe
+echo $PWD1 | $CRYPTSETUP open --type plain --hash sha256 $LOOPDEV $DEV_NAME || fail
+echo $PWD2 | $CRYPTSETUP open --type plain --hash sha256 /dev/mapper/$DEV_NAME $DEV_NAME2 || fail
+$CRYPTSETUP close $DEV_NAME >/dev/null 2>&1 && fail
+$CRYPTSETUP -q status $DEV_NAME >/dev/null 2>&1 || fail
+$CRYPTSETUP close --deferred $DEV_NAME >/dev/null 2>&1
+if [ $? -eq 0 ] ; then
+	dmsetup info $DEV_NAME | grep -q "DEFERRED REMOVE" || fail
+	$CRYPTSETUP -q status $DEV_NAME >/dev/null 2>&1 || fail
+	$CRYPTSETUP close --cancel-deferred $DEV_NAME >/dev/null 2>&1
+	dmsetup info $DEV_NAME | grep -q "DEFERRED REMOVE" >/dev/null 2>&1 && fail
+	$CRYPTSETUP close --deferred $DEV_NAME >/dev/null 2>&1
+	$CRYPTSETUP close $DEV_NAME2 || fail
+	$CRYPTSETUP -q status $DEV_NAME >/dev/null 2>&1 && fail
+else
+	$CRYPTSETUP close $DEV_NAME2 >/dev/null 2>&1
+	$CRYPTSETUP close $DEV_NAME >/dev/null 2>&1
+fi
+
+# Interactive tests
+# Do not remove sleep 0.1 below, the password query flushes TTY buffer (so the code is racy).
+command -v expect >/dev/null || skip "WARNING: expect tool missing, interactive test will be skipped." 0
+
+prepare "[32] Interactive password retry from terminal." new
+EXPECT_DEV=$(losetup $LOOPDEV | sed -e "s/.*(\(.*\))/\1/")
+EXPECT_TIMEOUT=60
+
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW luksOpen -v -T 2 $LOOPDEV $DEV_NAME
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0 x\n"
+expect timeout abort "No key available with this passphrase."
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Key slot 0 unlocked."
+expect timeout abort "Command successful."
+expect timeout abort eof
+exit
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+check_exists
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+
+prepare "[33] Interactive unsuccessful password retry from terminal." new
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW luksOpen -v -T 2 $LOOPDEV $DEV_NAME
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0 x\n"
+expect timeout abort "No key available with this passphrase."
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0 y\n"
+expect timeout abort "No key available with this passphrase."
+expect timeout abort eof
+exit
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+
+prepare "[34] Interactive kill of last key slot." new
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW luksKillSlot -v $LOOPDEV 0
+expect timeout abort "Are you sure? (Type 'yes' in capital letters):"
+send "YES\n"
+expect timeout abort "Enter any remaining passphrase:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksKillSlot -v $LOOPDEV 0
+expect timeout abort "Keyslot 0 is not active."
+expect timeout abort eof
+exit
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+
+prepare "[35] Interactive format of device." wipe
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW luksFormat --type luks1 $FAST_PBKDF_OPT -v $LOOPDEV
+expect timeout abort "Are you sure? (Type 'yes' in capital letters):"
+send "YES\n"
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Verify passphrase:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksOpen -v $LOOPDEV --test-passphrase
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+exit
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+
+prepare "[36] Interactive unsuccessful format of device." new
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW erase -v $LOOPDEV
+expect timeout abort "Are you sure? (Type 'yes' in capital letters):"
+send "YES\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksFormat --type luks1 $FAST_PBKDF_OPT -v $LOOPDEV
+expect timeout abort "Are you sure? (Type 'yes' in capital letters):"
+send "YES\n"
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Verify passphrase:"
+sleep 0.1
+send "$PWD0 x\n"
+expect timeout abort "Passphrases do not match."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksOpen -v $LOOPDEV -T 1 --test-passphrase
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "No usable keyslot is available."
+expect timeout abort eof
+exit
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+
+prepare "[37] Interactive add key." new
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW luksAddKey -S 2 $FAST_PBKDF_OPT -v $LOOPDEV
+expect timeout abort "Enter any existing passphrase:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Enter new passphrase for key slot:"
+sleep 0.1
+send "$PWD1\n"
+expect timeout abort "Verify passphrase:"
+sleep 0.1
+send "$PWD1\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksOpen -v $LOOPDEV --test-passphrase
+expect timeout abort "Enter passphrase"
+sleep 0.1
+send "$PWD1\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksKillSlot -v $LOOPDEV 1
+expect timeout abort "Keyslot 1 is not active."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksKillSlot -v $LOOPDEV 2
+expect timeout abort "Enter any remaining passphrase:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Key slot 2 removed."
+expect timeout abort eof
+exit
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+
+prepare "[38] Interactive change key." new
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW luksChangeKey $FAST_PBKDF_OPT -v $LOOPDEV
+expect timeout abort "Enter passphrase to be changed:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Enter new passphrase:"
+sleep 0.1
+send "$PWD1\n"
+expect timeout abort "Verify passphrase:"
+sleep 0.1
+send "$PWD1\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksOpen -v $LOOPDEV --test-passphrase
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD1\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+exit
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+
+prepare "[39] Interactive suspend and resume." new
+echo $PWD0 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW luksSuspend -v $DEV_NAME
+expect timeout abort "Command successful."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksResume -v -T 3  $DEV_NAME
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0 x\n"
+expect timeout abort "No key available with this passphrase."
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD1\n"
+expect timeout abort "No key available with this passphrase."
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0 y\n"
+expect timeout abort "No key available with this passphrase."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksResume -v $DEV_NAME
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$PWD0\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+exit
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+$CRYPTSETUP remove $DEV_NAME || fail
+
+prepare "[40] Long passphrase from TTY." wipe
+EXPECT_DEV=$(losetup $LOOPDEV | sed -e "s/.*(\(.*\))/\1/")
+
+# Password of maximal length 512 characters
+LONG_PWD=\
+"0123456789abcdef0123456789ABCDEF0123456789abcdef0123456789ABCDEF"\
+"Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do "\
+"eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut e"\
+"nim ad minim veniam, quis nostrud exercitation ullamco laboris n"\
+"isi ut aliquip ex ea commodo consequat. Duis aute irure dolor in"\
+" reprehenderit in voluptate velit esse cillum dolore eu fugiat n"\
+"ulla pariatur. Excepteur sint occaecat cupidatat non proident, s"\
+"unt in culpa qui officia deserunt mollit anim id est laborum.DEF"
+
+echo -n "$LONG_PWD" >$KEYE
+
+expect_run - >/dev/null <<EOF
+proc abort {} { send_error "Timeout. "; exit 2 }
+set timeout $EXPECT_TIMEOUT
+eval spawn $CRYPTSETUP_RAW luksFormat --type luks1 $FAST_PBKDF_OPT -v $LOOPDEV
+expect timeout abort "Are you sure? (Type 'yes' in capital letters):"
+send "YES\n"
+expect timeout abort "Enter passphrase for $EXPECT_DEV:"
+sleep 0.1
+send "$LONG_PWD\n"
+expect timeout abort "Verify passphrase:"
+sleep 0.1
+send "$LONG_PWD\n"
+expect timeout abort "Command successful."
+expect timeout abort eof
+eval spawn $CRYPTSETUP_RAW luksOpen -v $LOOPDEV --test-passphrase --key-file $KEYE
+expect timeout abort "Command successful."
+expect timeout abort eof
+EOF
+[ $? -eq 0 ] || fail "Expect script failed."
+
+prepare "[41] New luksAddKey options." file
+rm -f $VK_FILE
+echo "$PWD1" | $CRYPTSETUP luksFormat --type luks1 $FAST_PBKDF_OPT $IMG || fail
+echo $PWD1 | $CRYPTSETUP luksDump -q $IMG --dump-volume-key --volume-key-file $VK_FILE >/dev/null || fail
+
+# pass pass
+echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey -q -S1 $FAST_PBKDF_OPT $IMG || fail
+echo $PWD2 | $CRYPTSETUP open -q --test-passphrase -S1 $IMG || fail
+
+# pass file
+echo "$PWD2" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S1 --new-key-slot 2 $IMG $KEY1 || fail
+$CRYPTSETUP open --test-passphrase -q -S2 -d $KEY1 $IMG || fail
+
+# file pass
+echo "$PWD3" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S2 -d $KEY1 --new-key-slot 3 $IMG || fail
+echo $PWD3 | $CRYPTSETUP open -q --test-passphrase -S3 $IMG || fail
+
+# file file
+$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S2 --new-key-slot 4 -d $KEY1 --new-keyfile $KEY2 $IMG || fail
+$CRYPTSETUP open --test-passphrase -q -S4 -d $KEY2 $IMG || fail
+
+# vk pass
+echo $PWD3 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S5 --volume-key-file $VK_FILE $IMG || fail
+echo $PWD3 | $CRYPTSETUP open -q --test-passphrase -S5 $IMG || fail
+
+# vk file
+$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S6 --volume-key-file $VK_FILE --new-keyfile $KEY5 $IMG || fail
+$CRYPTSETUP open --test-passphrase -q -S6 -d $KEY5 $IMG || fail
+
+remove_mapping
+exit 0
diff --git a/tests/compat-test2 b/tests/compat-test2
new file mode 100755
index 0000000..c54dc7e
--- /dev/null
+++ b/tests/compat-test2
@@ -0,0 +1,1204 @@
+#!/bin/bash
+
+PS4='$LINENO:'
+[ -z "$CRYPTSETUP_PATH" ] && CRYPTSETUP_PATH=".."
+CRYPTSETUP=$CRYPTSETUP_PATH/cryptsetup
+
+CRYPTSETUP_VALGRIND=../.libs/cryptsetup
+CRYPTSETUP_LIB_VALGRIND=../.libs
+
+DEV_NAME=dummy
+DEV_NAME2=dummy2
+DEV_NAME3=dummy3
+ORIG_IMG=luks-test-orig
+IMG=luks-test
+IMG10=luks-test-v10
+HEADER_IMG=luks-header
+HEADER_KEYU=luks2_keyslot_unassigned.img
+HEADER_LUKS2_PV=blkid-luks2-pv.img
+KEY1=key1
+KEY2=key2
+KEY5=key5
+KEYE=keye
+PWD0="compatkey"
+PWD1="93R4P4pIqAH8"
+PWD2="mymJeD8ivEhE"
+PWD3="ocMakf3fAcQO"
+PWD4="Qx3qn46vq0v"
+PWDW="rUkL4RUryBom"
+TEST_KEYRING_NAME="compattest2_keyring"
+TEST_TOKEN0="compattest2_desc0"
+TEST_TOKEN1="compattest2_desc1"
+TEST_TOKEN2="compattest2_desc2"
+VK_FILE="compattest2_vkfile"
+IMPORT_TOKEN="{\"type\":\"some_type\",\"keyslots\":[],\"base64_data\":\"zxI7vKB1Qwl4VPB4D-N-OgcC14hPCG0IDu8O7eCqaQ\"}"
+TOKEN_FILE0=test-token-file0
+TOKEN_FILE1=test-token-file1
+KEY_FILE0=test-key-file0
+KEY_FILE1=test-key-file1
+
+FAST_PBKDF_OPT="--pbkdf pbkdf2 --pbkdf-force-iterations 1000"
+
+TEST_UUID="12345678-1234-1234-1234-123456789abc"
+
+LOOPDEV=$(losetup -f 2>/dev/null)
+FIPS_MODE=$(cat /proc/sys/crypto/fips_enabled 2>/dev/null)
+
+function remove_mapping()
+{
+	[ -b /dev/mapper/$DEV_NAME3 ] && dmsetup remove --retry $DEV_NAME3
+	[ -b /dev/mapper/$DEV_NAME2 ] && dmsetup remove --retry $DEV_NAME2
+	[ -b /dev/mapper/$DEV_NAME ] && dmsetup remove --retry $DEV_NAME
+	losetup -d $LOOPDEV >/dev/null 2>&1
+	rm -f $ORIG_IMG $IMG $IMG10 $KEY1 $KEY2 $KEY5 $KEYE $HEADER_IMG $HEADER_KEYU $VK_FILE $HEADER_LUKS2_PV missing-file $TOKEN_FILE0 $TOKEN_FILE1 test_image_* $KEY_FILE0 $KEY_FILE1 >/dev/null 2>&1
+
+	# unlink whole test keyring
+	[ -n "$TEST_KEYRING" ] && keyctl unlink $TEST_KEYRING "@u" >/dev/null
+	unset TEST_KEYRING
+
+	rmmod scsi_debug >/dev/null 2>&1
+	scsi_debug_teardown $DEV
+}
+
+function force_uevent()
+{
+	DNAME=$(echo $LOOPDEV | cut -f3 -d /)
+	echo "change" >/sys/block/$DNAME/uevent
+}
+
+function fail()
+{
+	[ -n "$1" ] && echo "$1"
+	remove_mapping
+	echo "FAILED backtrace:"
+	while caller $frame; do ((frame++)); done
+	exit 2
+}
+
+function fips_mode()
+{
+	[ -n "$FIPS_MODE" ] && [ "$FIPS_MODE" -gt 0 ]
+}
+
+function can_fail_fips()
+{
+	# Ignore this fail if running in FIPS mode
+	fips_mode || fail $1
+}
+
+function skip()
+{
+	[ -n "$1" ] && echo "$1"
+	remove_mapping
+	exit 77
+}
+
+function prepare()
+{
+	[ -b /dev/mapper/$DEV_NAME ] && dmsetup remove --retry $DEV_NAME
+
+	case "$2" in
+	wipe)
+		remove_mapping
+		dd if=/dev/zero of=$IMG bs=1M count=40 >/dev/null 2>&1
+		sync
+		losetup $LOOPDEV $IMG
+		;;
+	new)
+		remove_mapping
+		xz -cd compatimage.img.xz > $IMG
+		xz -dk $HEADER_KEYU.xz
+		# FIXME: switch to internal loop (no losetup at all)
+		echo "bad" | $CRYPTSETUP luksOpen --key-slot 0 --test-passphrase $IMG 2>&1 | \
+			grep "autoclear flag" && skip "WARNING: Too old kernel, test skipped."
+		losetup $LOOPDEV $IMG
+		xz -cd compatv10image.img.xz > $IMG10
+		;;
+	reuse | *)
+		if [ ! -e $IMG ]; then
+			xz -cd compatimage.img.xz > $IMG
+			losetup $LOOPDEV $IMG
+		fi
+		[ ! -e $IMG10 ] && xz -cd compatv10image.img.xz > $IMG10
+		;;
+	esac
+
+	if [ ! -e $KEY1 ]; then
+		#dd if=/dev/urandom of=$KEY1 count=1 bs=32 >/dev/null 2>&1
+		echo -n $'\x48\xc6\x74\x4f\x41\x4e\x50\xc0\x79\xc2\x2d\x5b\x5f\x68\x84\x17' >$KEY1
+		echo -n $'\x9c\x03\x5e\x1b\x4d\x0f\x9a\x75\xb3\x90\x70\x32\x0a\xf8\xae\xc4'>>$KEY1
+	fi
+
+	if [ ! -e $KEY2 ]; then
+		dd if=/dev/urandom of=$KEY2 count=1 bs=16 >/dev/null 2>&1
+	fi
+
+	if [ ! -e $KEY5 ]; then
+		dd if=/dev/urandom of=$KEY5 count=1 bs=16 >/dev/null 2>&1
+	fi
+
+	if [ ! -e $KEYE ]; then
+		touch $KEYE
+	fi
+
+	cp $IMG $ORIG_IMG
+	[ -n "$1" ] && echo "CASE: $1"
+}
+
+function check_exists()
+{
+	[ -b /dev/mapper/$DEV_NAME ] || fail
+}
+
+function valgrind_setup()
+{
+	command -v valgrind >/dev/null || fail "Cannot find valgrind."
+	[ ! -f $CRYPTSETUP_VALGRIND ] && fail "Unable to get location of cryptsetup executable."
+	export LD_LIBRARY_PATH="$CRYPTSETUP_LIB_VALGRIND:$LD_LIBRARY_PATH"
+}
+
+function valgrind_run()
+{
+	INFOSTRING="$(basename ${BASH_SOURCE[1]})-line-${BASH_LINENO[0]}" ./valg.sh ${CRYPTSETUP_VALGRIND} "$@"
+}
+
+function dm_crypt_keyring_support()
+{
+	VER_STR=$(dmsetup targets | grep crypt | cut -f2 -dv)
+	[ -z "$VER_STR" ] && fail "Failed to parse dm-crypt version."
+
+	VER_MAJ=$(echo $VER_STR | cut -f 1 -d.)
+	VER_MIN=$(echo $VER_STR | cut -f 2 -d.)
+	VER_PTC=$(echo $VER_STR | cut -f 3 -d.)
+
+	test -d /proc/sys/kernel/keys || return 1
+
+	[ $VER_MAJ -gt 1 ] && return 0
+	[ $VER_MAJ -eq 1 -a $VER_MIN -gt 18 ] && return 0
+	[ $VER_MAJ -eq 1 -a $VER_MIN -eq 18 -a $VER_PTC -ge 1 ] && return 0
+	return 1
+}
+
+function dm_crypt_keyring_flawed()
+{
+	dm_crypt_keyring_support && return 1;
+
+	[ $VER_MAJ -gt 1 ] && return 0
+	[ $VER_MAJ -eq 1 -a $VER_MIN -ge 15 ] && return 0
+	return 1
+}
+
+function dm_crypt_keyring_new_kernel()
+{
+	KER_STR=$(uname -r)
+	[ -z "$KER_STR" ] && fail "Failed to parse kernel version."
+	KER_MAJ=$(echo $KER_STR | cut -f 1 -d.)
+	KER_MIN=$(echo $KER_STR | cut -f 2 -d.)
+
+	[ $KER_MAJ -ge 5 ] && return 0
+	[ $KER_MAJ -eq 4 -a $KER_MIN -ge 15 ] && return 0
+	return 1
+}
+
+function dm_crypt_sector_size_support()
+{
+	VER_STR=$(dmsetup targets | grep crypt | cut -f2 -dv)
+	[ -z "$VER_STR" ] && fail "Failed to parse dm-crypt version."
+
+	VER_MAJ=$(echo $VER_STR | cut -f 1 -d.)
+	VER_MIN=$(echo $VER_STR | cut -f 2 -d.)
+	VER_PTC=$(echo $VER_STR | cut -f 3 -d.)
+
+	if [ $VER_MIN -ge 17 -o \( $VER_MIN -eq 14 -a $VER_PTC -ge 5 \) ]; then
+		return 0
+	fi
+
+	return 1
+}
+
+function test_and_prepare_keyring() {
+	command -v keyctl >/dev/null || skip "Cannot find keyctl, test skipped"
+	keyctl list "@s" > /dev/null || skip "Current session keyring is unreachable, test skipped"
+	TEST_KEYRING=$(keyctl newring $TEST_KEYRING_NAME "@u" 2> /dev/null)
+	test -n "$TEST_KEYRING" || skip "Failed to create keyring in user keyring"
+	keyctl search "@s" keyring "$TEST_KEYRING" > /dev/null 2>&1 || keyctl link "@u" "@s" > /dev/null 2>&1
+	load_key user test_key test_data "$TEST_KEYRING" || skip "Kernel keyring service is useless on this system, test skipped."
+}
+
+# $1 type
+# $2 description
+# $3 payload
+# $4 keyring
+function load_key()
+{
+	keyctl add $@ >/dev/null
+}
+
+function setup_luks2_env() {
+	echo $PWD1 | $CRYPTSETUP luksFormat --type luks2 $FAST_PBKDF_OPT $LOOPDEV || fail
+	$CRYPTSETUP luksDump $LOOPDEV >/dev/null || fail
+	echo $PWD1 | $CRYPTSETUP open $LOOPDEV $DEV_NAME || fail
+	HAVE_KEYRING=$($CRYPTSETUP status $DEV_NAME | grep "keyring")
+	if [ -n "$HAVE_KEYRING" ]; then
+		HAVE_KEYRING=1
+	else
+		HAVE_KEYRING=0
+	fi
+	if $($CRYPTSETUP --version | grep -q "BLKID"); then
+		HAVE_BLKID=1
+	else
+		HAVE_BLKID=0
+	fi
+	$CRYPTSETUP close $DEV_NAME || fail
+}
+
+# $1 path to scsi debug bdev
+scsi_debug_teardown() {
+	local _tries=15;
+
+	while [ -b "$1" -a $_tries -gt 0 ]; do
+		rmmod scsi_debug >/dev/null 2>&1
+		if [ -b "$1" ]; then
+			sleep .1
+			_tries=$((_tries-1))
+		fi
+	done
+
+	test ! -b "$1" || rmmod scsi_debug >/dev/null 2>&1
+}
+
+function add_scsi_device() {
+	scsi_debug_teardown $DEV
+	if [ -d /sys/module/scsi_debug ] ; then
+		echo "Cannot use scsi_debug module (in use or compiled-in), test skipped."
+		exit 77
+	fi
+	modprobe scsi_debug $@ delay=0 >/dev/null 2>&1
+	if [ $? -ne 0 ] ; then
+		echo "This kernel seems to not support proper scsi_debug module, test skipped."
+		exit 77
+	fi
+
+	sleep 1
+	DEV="/dev/"$(grep -l -e scsi_debug /sys/block/*/device/model | cut -f4 -d /)
+	[ -b $DEV ] || fail "Cannot find $DEV."
+}
+
+export LANG=C
+
+[ ! -x "$CRYPTSETUP" ] && skip "Cannot find $CRYPTSETUP, test skipped."
+[ $(id -u) != 0 ] && skip "WARNING: You must be root to run this test, test skipped."
+[ -z "$LOOPDEV" ] && skip "WARNING: Cannot find free loop device, test skipped."
+
+prepare "[0] Detect LUKS2 environment" wipe
+setup_luks2_env
+
+[ -n "$VALG" ] && valgrind_setup && CRYPTSETUP=valgrind_run
+
+prepare "[1] Data offset" wipe
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --offset 1 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --offset 16385 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --offset 32 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --align-payload 16384 --offset 16384 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --offset 16384 || fail
+$CRYPTSETUP -q luksDump  $LOOPDEV | grep -q "offset: $((512 * 16384)) \[bytes\]" || fail
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 1024 --offset 16384 >/dev/null || fail
+$CRYPTSETUP -q luksDump  $LOOPDEV | grep -q "offset: $((512 * 16384)) \[bytes\]" || fail
+truncate -s 4096 $HEADER_IMG
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG -q --offset 80000 >/dev/null 2>&1 || fail
+
+prepare "[2] Sector size and old payload alignment" wipe
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size  511 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size  256 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 8192 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size  512 || fail
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --align-payload 5 || fail
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size  512 --align-payload 5 || fail
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 2048 --align-payload 32 >/dev/null || fail
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 4096 >/dev/null || fail
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 2048 --align-payload 32768 >/dev/null || fail
+$CRYPTSETUP -q luksDump  $LOOPDEV | grep -q "offset: $((512 * 32768)) \[bytes\]" || fail
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 2048 >/dev/null || fail
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 4096 --align-payload 32768 >/dev/null || fail
+$CRYPTSETUP -q luksDump  $LOOPDEV | grep -q "offset: $((512 * 32768)) \[bytes\]" || fail
+
+prepare "[3] format" wipe
+echo $PWD1 | $CRYPTSETUP -q $FAST_PBKDF_OPT -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks2 $LOOPDEV || fail
+prepare "[4] format using hash sha512" wipe
+echo $PWD1 | $CRYPTSETUP $FAST_PBKDF_OPT -h sha512 -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks2 $LOOPDEV || fail
+$CRYPTSETUP -q luksDump  $LOOPDEV | grep "0: pbkdf2" -A2 | grep "Hash:" | grep -qe sha512 || fail
+# Check JSON dump for some mandatory section
+$CRYPTSETUP -q luksDump  $LOOPDEV --dump-json-metadata | grep -q '"tokens":' || fail
+
+prepare "[5] open"
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase || fail
+echo $PWDW | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase 2>/dev/null && fail
+[ $? -ne 2 ] && fail "luksOpen should return EPERM exit code"
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+check_exists
+
+# Key Slot 1 and key material section 1 must change, the rest must not.
+prepare "[6] add key"
+echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT || fail
+echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+
+# Unsuccessful Key Delete - nothing may change
+prepare "[7] unsuccessful delete"
+echo $PWDW | $CRYPTSETUP luksKillSlot $LOOPDEV 1 2>/dev/null && fail
+[ $? -ne 2 ] && fail "luksKillSlot should return EPERM exit code"
+#FIXME
+#$CRYPTSETUP -q luksKillSlot $LOOPDEV 8 2>/dev/null && fail
+#$CRYPTSETUP -q luksKillSlot $LOOPDEV 7 2>/dev/null && fail
+
+# Delete Key Test
+# Key Slot 1 and key material section 1 must change, the rest must not
+prepare "[8] successful delete"
+$CRYPTSETUP -q luksKillSlot $LOOPDEV 1 || fail
+echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2> /dev/null && fail
+[ $? -ne 2 ] && fail "luksOpen should return EPERM exit code"
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+
+# Key Slot 1 and key material section 1 must change, the rest must not
+prepare "[9] add key test for key files"
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV $KEY1 || fail
+$CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail
+
+# Key Slot 1 and key material section 1 must change, the rest must not
+prepare "[10] delete key test with key1 as remaining key"
+$CRYPTSETUP -d $KEY1 luksKillSlot $LOOPDEV 0 || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail
+
+# Delete last slot
+prepare "[11] delete last key" wipe
+echo $PWD1 | $CRYPTSETUP luksFormat --type luks2 $LOOPDEV $FAST_PBKDF_OPT || fail
+echo $PWD1 | $CRYPTSETUP luksKillSlot $LOOPDEV 0 || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+
+# Format test for ESSIV, and some other parameters.
+prepare "[12] parameter variation test" wipe
+$CRYPTSETUP -q $FAST_PBKDF_OPT -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks2 $LOOPDEV $KEY1 || fail
+$CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail
+
+prepare	"[13] open/close - stacked devices" wipe
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 $LOOPDEV $FAST_PBKDF_OPT || fail
+echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 /dev/mapper/$DEV_NAME $FAST_PBKDF_OPT || fail
+echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME2 || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+
+prepare	"[14] format/open - passphrase on stdin & new line" wipe
+# stdin defined by "-" must take even newline
+#echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksFormat $LOOPDEV - || fail
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q --key-file=- luksFormat --type luks2 $LOOPDEV || fail
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+# now also try --key-file
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q luksFormat --type luks2 $LOOPDEV --key-file=- || fail
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+# process newline if from stdin
+echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q luksFormat --type luks2 $LOOPDEV || fail
+echo "$PWD1" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+
+prepare "[15] UUID - use and report provided UUID" wipe
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --uuid blah --type luks2 $LOOPDEV 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --uuid $TEST_UUID --type luks2 $LOOPDEV || fail
+tst=$($CRYPTSETUP -q luksUUID $LOOPDEV)
+[ "$tst"x = "$TEST_UUID"x ] || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail
+$CRYPTSETUP -q luksUUID --uuid $TEST_UUID $LOOPDEV || fail
+tst=$($CRYPTSETUP -q luksUUID $LOOPDEV)
+[ "$tst"x = "$TEST_UUID"x ] || fail
+
+prepare "[16] luksFormat" wipe
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --volume-key-file /dev/urandom --type luks2 $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --volume-key-file /dev/urandom --type luks2 $LOOPDEV -d $KEY1 || fail
+$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --volume-key-file /dev/urandom -s 256 --uuid $TEST_UUID --type luks2 $LOOPDEV $KEY1 || fail
+$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+# open by UUID
+if [ -d /dev/disk/by-uuid ] ; then
+	force_uevent # some systems do not update loop by-uuid
+	$CRYPTSETUP luksOpen -d $KEY1 UUID=X$TEST_UUID $DEV_NAME 2>/dev/null && fail
+	$CRYPTSETUP luksOpen -d $KEY1 UUID=$TEST_UUID $DEV_NAME || fail
+	$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+fi
+# skip tests using empty passphrases
+if [ ! fips_mode ]; then
+# empty keyfile
+$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEYE || fail
+$CRYPTSETUP luksOpen -d $KEYE $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+fi
+
+# open by volume key
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT -s 256 --volume-key-file $KEY1 --type luks2 $LOOPDEV || fail
+$CRYPTSETUP luksOpen --volume-key-file /dev/urandom $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP luksOpen --volume-key-file $KEY1 $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP -q luksClose  $DEV_NAME || fail
+
+prepare "[17] AddKey volume key, passphrase and keyfile" wipe
+# volumekey
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --volume-key-file /dev/zero --key-slot 3 || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2" || fail
+echo $PWD2 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --volume-key-file /dev/zero --key-slot 4 || fail
+echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 4 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "4: luks2" || fail
+echo $PWD3 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --volume-key-file /dev/null --key-slot 5 2>/dev/null && fail
+$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --volume-key-file /dev/zero --key-slot 5 $KEY1 || fail
+$CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 5 -d $KEY1 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || fail
+
+# special "-" handling
+$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY1 --key-slot 3 || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 - || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d - --test-passphrase || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d - $KEY2 || fail
+$CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d - -d $KEY1 --test-passphrase 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d $KEY1 -d $KEY1 --test-passphrase 2>/dev/null && fail
+
+# [0]PWD1 [1]PWD2 [2]$KEY1/1 [3]$KEY1 [4]$KEY2
+$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY1 --key-slot 3 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2" || fail
+$CRYPTSETUP luksAddKey -q $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 3 2>/dev/null && fail
+# keyfile/keyfile
+$CRYPTSETUP luksAddKey -q $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 4 || fail
+$CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase --key-slot 4 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "4: luks2" || fail
+# passphrase/keyfile
+echo $PWD1 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 --key-slot 0 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 0 || fail
+# passphrase/passphrase
+echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --key-slot 1 || fail
+echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 1 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail
+# keyfile/passphrase
+echo -e "$PWD2\n" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 2 --new-keyfile-size 8 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2" || fail
+
+prepare "[18] RemoveKey passphrase and keyfile" reuse
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2" || fail
+$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2" && fail
+$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 2>/dev/null && fail
+[ $? -ne 2 ] && fail "luksRemoveKey should return EPERM exit code"
+$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 --keyfile-size 1 2>/dev/null && fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "4: luks2" || fail
+$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "4: luks2" && fail
+# if password or keyfile is provided, batch mode must not suppress it
+echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 2>/dev/null && fail
+echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 -q 2>/dev/null && fail
+echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 --key-file=- 2>/dev/null && fail
+echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 --key-file=- -q 2>/dev/null && fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2" || fail
+# kill slot using passphrase from 1
+echo $PWD2 | $CRYPTSETUP luksKillSlot $LOOPDEV 2 2>/dev/null || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2" && fail
+# remove key0 / slot 0
+echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" && fail
+# last keyslot, in batch mode no passphrase needed...
+$CRYPTSETUP luksKillSlot -q $LOOPDEV 1 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" && fail
+
+prepare "[19] create & status & resize" wipe
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+if dm_crypt_keyring_support; then
+	echo | $CRYPTSETUP -q resize --size 100 $DEV_NAME 2>/dev/null && fail
+	if [ $HAVE_KEYRING -gt 0 -a -d /proc/sys/kernel/keys ]; then
+		test_and_prepare_keyring
+		load_key user $TEST_TOKEN2 $PWD1 "$TEST_KEYRING" || skip "Kernel keyring service is useless on this system, test skipped."
+		$CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN2 --token-id 1 || fail
+		$CRYPTSETUP -q resize --size 99 $DEV_NAME <&- || fail
+		$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "99 sectors" || fail
+		#replace kernel key with wrong pass
+		load_key user $TEST_TOKEN2 $PWD2 "$TEST_KEYRING" || skip "Kernel keyring service is useless on this system, test skipped."
+		# must fail due to --token-only
+		echo $PWD1 | $CRYPTSETUP -q resize --token-only --size 100 $DEV_NAME && fail
+		$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "100 sectors" && fail
+	fi
+fi
+echo $PWD1 | $CRYPTSETUP -q resize --size 100 $DEV_NAME || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
+echo $PWD1 | $CRYPTSETUP -q resize --device-size 51200 $DEV_NAME || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
+echo $PWD1 | $CRYPTSETUP -q resize --device-size 1M $DEV_NAME || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail
+echo $PWD1 | $CRYPTSETUP -q resize --device-size 512k --size 1024 $DEV_NAME > /dev/null 2>&1 && fail
+echo $PWD1 | $CRYPTSETUP -q resize --device-size 4097 $DEV_NAME > /dev/null 2>&1 && fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail
+$CRYPTSETUP close $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP luksOpen --disable-keyring $LOOPDEV $DEV_NAME || fail
+echo | $CRYPTSETUP -q resize --size 100 $DEV_NAME || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
+$CRYPTSETUP close $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+if dm_crypt_keyring_support; then
+	$CRYPTSETUP -q resize --disable-keyring --size 100 $DEV_NAME 2>/dev/null && fail
+fi
+if dm_crypt_sector_size_support; then
+	$CRYPTSETUP close $DEV_NAME || fail
+	echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 --sector-size 4096 $LOOPDEV > /dev/null || fail
+	echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+	echo $PWD1 | $CRYPTSETUP -q resize --device-size 1M $DEV_NAME || fail
+	$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail
+	echo $PWD1 | $CRYPTSETUP -q resize --device-size 2049s $DEV_NAME > /dev/null 2>&1 && fail
+	echo $PWD1 | $CRYPTSETUP -q resize --size 2049 $DEV_NAME > /dev/null 2>&1 && fail
+	$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail
+fi
+$CRYPTSETUP close $DEV_NAME || fail
+# Resize not aligned to logical block size
+add_scsi_device dev_size_mb=32 sector_size=4096
+echo $PWD1 | $CRYPTSETUP luksFormat --type luks2 $FAST_PBKDF_OPT $DEV || fail
+echo $PWD1 | $CRYPTSETUP open $DEV $DEV_NAME || fail
+OLD_SIZE=$($CRYPTSETUP status $DEV_NAME | grep "^ \+size:" | sed 's/.* \([0-9]\+\) .*/\1/') #'
+echo $PWD1 | $CRYPTSETUP resize $DEV_NAME -b 7 2> /dev/null && fail
+dmsetup info $DEV_NAME | grep -q SUSPENDED && fail
+NEW_SIZE=$($CRYPTSETUP status $DEV_NAME | grep "^ \+size:" | sed 's/.* \([0-9]\+\) .*/\1/') #'
+test $OLD_SIZE -eq $NEW_SIZE || fail
+$CRYPTSETUP close $DEV_NAME || fail
+
+prepare "[20] Disallow open/create if already mapped." wipe
+$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV 2>/dev/null && fail
+$CRYPTSETUP remove  $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME2 2>/dev/null && fail
+$CRYPTSETUP  luksClose  $DEV_NAME || fail
+
+prepare "[21] luksDump" wipe
+echo $PWD1 | $CRYPTSETUP -q luksFormat --key-size 256 $FAST_PBKDF_OPT --uuid $TEST_UUID --type luks2 $LOOPDEV $KEY1 || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q $TEST_UUID || fail
+echo $PWDW | $CRYPTSETUP luksDump $LOOPDEV --dump-volume-key 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksDump $LOOPDEV --dump-volume-key | grep -q "MK dump:" || fail
+$CRYPTSETUP luksDump -q $LOOPDEV --dump-volume-key -d $KEY1 | grep -q "MK dump:" || fail
+echo $PWD1 | $CRYPTSETUP luksDump -q $LOOPDEV --dump-master-key --master-key-file $VK_FILE >/dev/null || fail
+rm -f $VK_FILE
+echo $PWD1 | $CRYPTSETUP luksDump -q $LOOPDEV --dump-volume-key --volume-key-file $VK_FILE >/dev/null || fail
+echo $PWD1 | $CRYPTSETUP luksDump -q $LOOPDEV --dump-volume-key --volume-key-file $VK_FILE 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --volume-key-file $VK_FILE $LOOPDEV || fail
+# Use volume key file without keyslots
+$CRYPTSETUP luksErase -q $LOOPDEV || fail
+$CRYPTSETUP luksOpen --volume-key-file $VK_FILE --key-size 256 --test-passphrase $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --volume-key-file $VK_FILE --key-size 256 $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP luksOpen --test-passphrase $LOOPDEV || fail
+
+prepare "[22] remove disappeared device" wipe
+dmsetup create $DEV_NAME --table "0 39998 linear $LOOPDEV 2" || fail
+echo $PWD1 | $CRYPTSETUP -q $FAST_PBKDF_OPT luksFormat --type luks2 /dev/mapper/$DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail
+# underlying device now returns error but node is still present
+dmsetup load $DEV_NAME --table "0 40000 error" || fail
+dmsetup resume $DEV_NAME || fail
+$CRYPTSETUP -q luksClose $DEV_NAME2 || fail
+dmsetup remove --retry $DEV_NAME || fail
+
+prepare "[23] ChangeKey passphrase and keyfile" wipe
+# [0]$KEY1 [1]key0
+$CRYPTSETUP -q luksFormat --type luks2 $LOOPDEV $KEY1 $FAST_PBKDF_OPT --key-slot 0 --key-size 256 --luks2-keyslots-size 256k >/dev/null || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey -q $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 --key-slot 1 || fail
+# keyfile [0] / keyfile [0]
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 0 || fail
+# passphrase [1] / passphrase [1]
+echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT --key-slot 1 || fail
+# keyfile [0] / keyfile [new] - with LUKS2 it should stay
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 $KEY1 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2" && fail
+# passphrase [1] / passphrase [new]
+echo -e "$PWD2\n$PWD1\n" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT $LOOPDEV || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2" && fail
+# test out of raw area, change in-place (space only for 2 keyslots)
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" || fail
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 2>/dev/null && fail
+
+prepare "[24] Keyfile limit" wipe
+$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY1 --key-slot 0 -l 13 || fail
+$CRYPTSETUP --key-file=$KEY1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=$KEY1 -l 0 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=$KEY1 -l -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=$KEY1 -l 14 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=$KEY1 -l 13 luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksClose  $DEV_NAME || fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 2>/dev/null && fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -l 14 2>/dev/null && fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -l -1 2>/dev/null && fail
+$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 13 --new-keyfile-size 12 || fail
+$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 2>/dev/null && fail
+$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 -l 12 || fail
+$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 2>/dev/null && fail
+[ $? -ne 2 ] && fail "luksChangeKey should return EPERM exit code"
+$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 -l 14 2>/dev/null && fail
+$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 13 || fail
+# -l is ignored for stdin if _only_ passphrase is used
+echo $PWD1 | $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY2 $FAST_PBKDF_OPT || fail
+# this is stupid, but expected
+echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 11 2>/dev/null && fail
+echo $PWDW"0" | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 12 2>/dev/null && fail
+echo -e "$PWD1\n" | $CRYPTSETUP luksRemoveKey $LOOPDEV -d- -l 12 || fail
+# offset
+$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY1 --key-slot 0 -l 13 --keyfile-offset 16 || fail
+$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 15 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 16 luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksClose  $DEV_NAME || fail
+$CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 -l 13 --keyfile-offset 16 $KEY2 --new-keyfile-offset 1 || fail
+$CRYPTSETUP --key-file=$KEY2 --keyfile-offset 11 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP --key-file=$KEY2 --keyfile-offset 1 luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksClose  $DEV_NAME || fail
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 --keyfile-offset 1 $KEY2 --new-keyfile-offset 0 || fail
+$CRYPTSETUP luksOpen -d $KEY2 $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksClose $DEV_NAME || fail
+
+prepare "[26] Suspend/Resume" wipe
+# LUKS
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksSuspend $DEV_NAME || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep -q "(suspended)" || fail
+$CRYPTSETUP -q resize  $DEV_NAME 2>/dev/null && fail
+echo $PWDW | $CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail
+[ $? -ne 2 ] && fail "luksResume should return EPERM exit code"
+echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME  || fail
+$CRYPTSETUP -q luksClose $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat -c null $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP luksSuspend $DEV_NAME || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep -q "(suspended)" || fail
+echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME  || fail
+$CRYPTSETUP -q luksClose $DEV_NAME || fail
+
+prepare "[27] luksOpen/Resume with specified key slot number" wipe
+# first, let's try passphrase option
+echo $PWD3 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT -S 5 --type luks2 $LOOPDEV || fail
+echo $PWD3 | $CRYPTSETUP luksOpen -S 4 $LOOPDEV $DEV_NAME 2>/dev/null && fail
+[ -b /dev/mapper/$DEV_NAME ] && fail
+echo $PWD3 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME || fail
+check_exists
+$CRYPTSETUP luksSuspend $DEV_NAME || fail
+echo $PWD3 | $CRYPTSETUP luksResume -S 4 $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP -q status $DEV_NAME | grep -q "(suspended)" || fail
+echo $PWD3 | $CRYPTSETUP luksResume -S 5 $DEV_NAME || fail
+$CRYPTSETUP luksClose $DEV_NAME || fail
+echo -e "$PWD3\n$PWD1" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 0 $LOOPDEV || fail
+echo $PWD3 | $CRYPTSETUP luksOpen -S 0 $LOOPDEV $DEV_NAME 2>/dev/null && fail
+[ -b /dev/mapper/$DEV_NAME ] && fail
+echo $PWD1 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME 2>/dev/null && fail
+[ -b /dev/mapper/$DEV_NAME ] && fail
+# second, try it with keyfiles
+$CRYPTSETUP -q luksFormat -q -S 5 $FAST_PBKDF_OPT -d $KEY5 --type luks2 $LOOPDEV || fail
+$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail
+$CRYPTSETUP luksOpen -S 5 -d $KEY5 $LOOPDEV $DEV_NAME || fail
+check_exists
+$CRYPTSETUP luksSuspend $DEV_NAME || fail
+$CRYPTSETUP luksResume -S 1 -d $KEY5 $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP -q status $DEV_NAME | grep -q "(suspended)" || fail
+$CRYPTSETUP luksResume -S 5 -d $KEY5 $DEV_NAME || fail
+$CRYPTSETUP luksClose $DEV_NAME || fail
+$CRYPTSETUP luksOpen -S 1 -d $KEY5 $LOOPDEV $DEV_NAME 2>/dev/null && fail
+[ -b /dev/mapper/$DEV_NAME ] && fail
+$CRYPTSETUP luksOpen -S 5 -d $KEY1 $LOOPDEV $DEV_NAME 2>/dev/null && fail
+[ -b /dev/mapper/$DEV_NAME ] && fail
+# test keyslot not assigned to segment is unable to unlock volume
+# otoh it should be allowed to test for proper passphrase
+prepare "" new
+echo $PWD1 | $CRYPTSETUP open -S1 --test-passphrase $HEADER_KEYU || fail
+echo $PWD1 | $CRYPTSETUP open --unbound --test-passphrase $HEADER_KEYU || fail
+echo $PWD1 | $CRYPTSETUP open -S1 $HEADER_KEYU $DEV_NAME 2>/dev/null && fail
+[ -b /dev/mapper/$DEV_NAME ] && fail
+echo $PWD1 | $CRYPTSETUP open $HEADER_KEYU $DEV_NAME 2>/dev/null && fail
+[ -b /dev/mapper/$DEV_NAME ] && fail
+echo $PWD0 | $CRYPTSETUP open -S1 --test-passphrase $HEADER_KEYU $DEV_NAME 2>/dev/null && fail
+$CRYPTSETUP luksKillSlot -q $HEADER_KEYU 0
+$CRYPTSETUP luksDump $HEADER_KEYU | grep -q "0: luks2" && fail
+echo $PWD1 | $CRYPTSETUP open -S1 --test-passphrase $HEADER_KEYU || fail
+echo $PWD1 | $CRYPTSETUP open --unbound --test-passphrase $HEADER_KEYU || fail
+echo $PWD1 | $CRYPTSETUP open -S1 $HEADER_KEYU $DEV_NAME 2>/dev/null && fail
+
+prepare "[28] Detached LUKS header" wipe
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG || fail
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG --align-payload 1 >/dev/null 2>&1 && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG --align-payload 8192 || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG --align-payload 4096 >/dev/null || fail
+$CRYPTSETUP luksDump $HEADER_IMG | grep -e "0: crypt" -A1 | grep -qe $((4096*512)) || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG --align-payload 0 --sector-size 512 || fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV-missing --header $HEADER_IMG $DEV_NAME 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP -q resize  $DEV_NAME --size 100 --header $HEADER_IMG || fail
+$CRYPTSETUP -q status  $DEV_NAME --header $HEADER_IMG | grep "size:" | grep -q "100 sectors" || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "type:" | grep -q "n/a" || fail
+$CRYPTSETUP -q status  $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail
+$CRYPTSETUP luksSuspend $DEV_NAME --header $HEADER_IMG || fail
+echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail
+$CRYPTSETUP luksSuspend $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail
+$CRYPTSETUP luksClose $DEV_NAME || fail
+echo $PWD1 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 5 _fakedev_ --header $HEADER_IMG $KEY5 || fail
+$CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "5: luks2" || fail
+$CRYPTSETUP luksKillSlot -q _fakedev_ --header $HEADER_IMG 5 || fail
+$CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "5: luks2" && fail
+echo $PWD1 | $CRYPTSETUP open --test-passphrase $HEADER_IMG || fail
+rm $HEADER_IMG || fail
+# create exactly 16 MiBs LUKS2 header
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG --luks2-keyslots-size 16352k --luks2-metadata-size 16k --offset 131072 >/dev/null || fail
+SIZE=$(stat --printf=%s $HEADER_IMG)
+test $SIZE -eq 16777216 || fail
+$CRYPTSETUP -q luksDump  $HEADER_IMG | grep -q "offset: $((512 * 131072)) \[bytes\]" || fail
+
+prepare "[29] Repair metadata" wipe
+xz -dk $HEADER_LUKS2_PV.xz
+if [ "$HAVE_BLKID" -gt 0 ]; then
+	$CRYPTSETUP isLuks --disable-locks $HEADER_LUKS2_PV && fail
+	$CRYPTSETUP isLuks $HEADER_LUKS2_PV && fail
+	$CRYPTSETUP isLuks --disable-locks --type luks2 $HEADER_LUKS2_PV && fail
+	$CRYPTSETUP isLuks --type luks2 $HEADER_LUKS2_PV && fail
+fi
+$CRYPTSETUP -q repair $HEADER_LUKS2_PV || fail
+$CRYPTSETUP isLuks $HEADER_LUKS2_PV || fail
+$CRYPTSETUP isLuks --type luks2 $HEADER_LUKS2_PV || fail
+$CRYPTSETUP isLuks --type luks1 $HEADER_LUKS2_PV && fail
+
+prepare "[30] LUKS erase" wipe
+$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY5 --key-slot 5 || fail
+$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || fail
+$CRYPTSETUP luksErase -q $LOOPDEV || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" && fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" && fail
+
+prepare "[31] LUKS convert" wipe
+$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks1 $LOOPDEV $KEY5 --key-slot 5 || fail
+$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail
+$CRYPTSETUP -q luksDump  $LOOPDEV --dump-json-metadata >/dev/null 2>&1 && fail
+$CRYPTSETUP -q convert --type luks1 $LOOPDEV >/dev/null 2>&1 && fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: ENABLED" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: ENABLED" || fail
+$CRYPTSETUP -q convert --type luks2 $LOOPDEV || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || fail
+$CRYPTSETUP -q convert --type luks1 $LOOPDEV || fail
+# hash test
+$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 --sector-size 512 $LOOPDEV $KEY5 -S 0 --hash sha512 || fail
+$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 --hash sha256 || fail
+$CRYPTSETUP -q convert --type luks1 $LOOPDEV >/dev/null 2>&1 && fail
+$CRYPTSETUP -q luksKillSlot $LOOPDEV 1 || fail
+$CRYPTSETUP -q convert --type luks1 $LOOPDEV || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: ENABLED" || fail
+$CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 0 -d $KEY5 || fail
+# sector size test
+$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 --sector-size 1024 $LOOPDEV $KEY5 || fail
+$CRYPTSETUP -q convert --type luks1 $LOOPDEV >/dev/null 2>&1 && fail
+
+# create LUKS1 with data offset not aligned to 4KiB
+$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks1 $LOOPDEV $KEY5 --align-payload 4097 || fail
+$CRYPTSETUP -q convert --type luks2 $LOOPDEV || fail
+$CRYPTSETUP isLuks --type luks2 $LOOPDEV || fail
+$CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 0 -d $KEY5 || fail
+
+# keyslot 1 area offset is higher than keyslot 0 area
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 --key-slot 0 $LOOPDEV || fail
+echo -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksAddKey $FAST_PBKDF_OPT --key-slot 1 $LOOPDEV || fail
+echo -e "$PWD1\n$PWD1" | $CRYPTSETUP -q luksChangeKey $FAST_PBKDF_OPT $LOOPDEV || fail
+# convert to LUKS1 and back; LUKS1 does not store length, only offset
+$CRYPTSETUP -q convert --type luks1 $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP -q open --test-passphrase $LOOPDEV || fail
+echo $PWD2 | $CRYPTSETUP -q open --test-passphrase $LOOPDEV || fail
+$CRYPTSETUP -q convert --type luks2 $LOOPDEV || fail
+echo $PWD1 | $CRYPTSETUP -q open --test-passphrase $LOOPDEV || fail
+echo $PWD2 | $CRYPTSETUP -q open --test-passphrase $LOOPDEV || fail
+
+if dm_crypt_keyring_flawed; then
+	prepare "[32a] LUKS2 keyring dm-crypt bug" wipe
+	echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG || fail
+	echo $PWD1 | $CRYPTSETUP open $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail
+	$CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "dm-crypt" || fail
+	$CRYPTSETUP close $DEV_NAME || fail
+	# key must not load in kernel key even when dm-crypt module is missing
+	if rmmod dm-crypt >/dev/null 2>&1; then
+		echo $PWD1 | $CRYPTSETUP open $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail
+		$CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "dm-crypt" || fail
+		$CRYPTSETUP close $DEV_NAME || fail
+	fi
+fi
+
+if dm_crypt_keyring_support && dm_crypt_keyring_new_kernel; then
+	prepare "[32] LUKS2 key in keyring" wipe
+	echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG || fail
+
+	# check keyring support detection works as expected
+	rmmod dm-crypt >/dev/null 2>&1 || true
+	echo $PWD1 | $CRYPTSETUP open $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail
+	$CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "keyring" || fail
+	$CRYPTSETUP close $DEV_NAME || fail
+
+	echo $PWD1 | $CRYPTSETUP open  $LOOPDEV --disable-keyring --header $HEADER_IMG $DEV_NAME || fail
+	$CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "dm-crypt" || fail
+	$CRYPTSETUP close $DEV_NAME || fail
+
+	echo $PWD1 | $CRYPTSETUP open $LOOPDEV --disable-keyring --header $HEADER_IMG $DEV_NAME || fail
+	$CRYPTSETUP luksSuspend $DEV_NAME || fail
+	echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail
+	$CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "keyring" || fail
+	$CRYPTSETUP close $DEV_NAME || fail
+
+	echo $PWD1 | $CRYPTSETUP open $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail
+	$CRYPTSETUP luksSuspend $DEV_NAME || fail
+	echo $PWD1 | $CRYPTSETUP luksResume --disable-keyring $DEV_NAME --header $HEADER_IMG || fail
+	$CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "dm-crypt" || fail
+	$CRYPTSETUP close $DEV_NAME || fail
+fi
+
+# FIXME: candidate for non-root tests
+prepare "[33] tokens" wipe
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail
+if [ $HAVE_KEYRING -gt 0 -a -d /proc/sys/kernel/keys ]; then
+
+	test_and_prepare_keyring
+
+	$CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN0 --token-id 3 || fail
+	$CRYPTSETUP luksDump $LOOPDEV | grep -q -e "3: luks2-keyring" || fail
+	# keyslot 5 is inactive
+	$CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN1 --key-slot 5 2> /dev/null && fail
+	# key description is not reachable
+	$CRYPTSETUP open --token-only $LOOPDEV --test-passphrase && fail
+	# wrong passphrase
+	load_key user $TEST_TOKEN0 "blabla" "$TEST_KEYRING" || fail "Cannot load 32 byte user key type"
+	$CRYPTSETUP open --token-only $LOOPDEV --test-passphrase 2>/dev/null && fail
+	load_key user $TEST_TOKEN0 $PWD1 "$TEST_KEYRING" || fail "Cannot load 32 byte user key type"
+	$CRYPTSETUP open --token-only $LOOPDEV --test-passphrase || fail
+	$CRYPTSETUP open --token-only $LOOPDEV $DEV_NAME || fail
+	$CRYPTSETUP status $DEV_NAME > /dev/null || fail
+	$CRYPTSETUP luksSuspend $DEV_NAME || fail
+	$CRYPTSETUP luksResume $DEV_NAME <&- || fail
+	$CRYPTSETUP -q status  $DEV_NAME | grep -q "(suspended)" && fail
+	$CRYPTSETUP luksSuspend $DEV_NAME || fail
+	$CRYPTSETUP luksResume $DEV_NAME --token-type luks2-keyring <&- || fail
+	$CRYPTSETUP close $DEV_NAME || fail
+
+	# check --token-type sort of works (TODO: extend tests when native systemd tokens are available)
+	echo -n "$IMPORT_TOKEN" | $CRYPTSETUP token import $LOOPDEV --token-id 22 || fail
+	# this excludes keyring tokens from unlocking device
+	$CRYPTSETUP open --token-only --token-type some_type $LOOPDEV --test-passphrase && fail
+	$CRYPTSETUP open --token-only --token-type some_type $LOOPDEV $DEV_NAME && fail
+	$CRYPTSETUP status $DEV_NAME > /dev/null && fail
+
+	$CRYPTSETUP token remove --token-id 3 $LOOPDEV || fail
+	$CRYPTSETUP luksDump $LOOPDEV | grep -q -e "3: luks2-keyring" && fail
+
+	# test we can remove keyslot with token
+	echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey -q -S4 $FAST_PBKDF_OPT $LOOPDEV || fail
+	$CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN1 --key-slot 4 --token-id 0 || fail
+	$CRYPTSETUP -q luksKillSlot $LOOPDEV 4 || fail
+	$CRYPTSETUP token remove --token-id 0 $LOOPDEV || fail
+
+	# test we can add unassigned token
+	$CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN0 --unbound --token-id 0 || fail
+	$CRYPTSETUP open --token-only --token-id 0 --test-passphrase $LOOPDEV && fail
+	$CRYPTSETUP token remove --token-id 0 $LOOPDEV || fail
+
+	# test token unassign works
+	$CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN0 -S0 --token-id 0 || fail
+	$CRYPTSETUP open --token-only --token-id 0 --test-passphrase $LOOPDEV || fail
+	$CRYPTSETUP token unassign --token-id 0 $LOOPDEV 2>/dev/null && fail
+	$CRYPTSETUP token unassign -S0 $LOOPDEV 2>/dev/null && fail
+	$CRYPTSETUP token unassign --token-id 0 -S0 $LOOPDEV || fail
+	$CRYPTSETUP open --token-only --token-id 0 --test-passphrase $LOOPDEV && fail
+	$CRYPTSETUP token unassign --token-id 0 -S0 $LOOPDEV 2>/dev/null && fail
+	$CRYPTSETUP token unassign --token-id 0 -S44 $LOOPDEV 2>/dev/null && fail
+	$CRYPTSETUP token unassign --token-id 44 -S0 $LOOPDEV 2>/dev/null && fail
+fi
+echo -n "$IMPORT_TOKEN" | $CRYPTSETUP token import $LOOPDEV --token-id 10 || fail
+echo -n "$IMPORT_TOKEN" | $CRYPTSETUP token import $LOOPDEV --token-id 11 --json-file - || fail
+echo -n "$IMPORT_TOKEN" > $TOKEN_FILE0
+$CRYPTSETUP token import $LOOPDEV --token-id 12 --json-file $TOKEN_FILE0 || fail
+$CRYPTSETUP token import $LOOPDEV --token-id 12 --json-file $TOKEN_FILE0 2>/dev/null && fail
+$CRYPTSETUP token export $LOOPDEV --token-id 10 >$TOKEN_FILE1 || fail
+diff $TOKEN_FILE0 $TOKEN_FILE1 || fail
+$CRYPTSETUP token export $LOOPDEV --token-id 11 >$TOKEN_FILE1 || fail
+diff $TOKEN_FILE0 $TOKEN_FILE1 || fail
+$CRYPTSETUP token export $LOOPDEV --token-id 12 >$TOKEN_FILE1 || fail
+diff $TOKEN_FILE0 $TOKEN_FILE1 || fail
+$CRYPTSETUP token export $LOOPDEV --token-id 12 --json-file $TOKEN_FILE1 || fail
+diff $TOKEN_FILE0 $TOKEN_FILE1 || fail
+$CRYPTSETUP token export $LOOPDEV --token-id 12 > $TOKEN_FILE1 || fail
+diff $TOKEN_FILE0 $TOKEN_FILE1 || fail
+
+prepare "[34] LUKS keyslot priority" wipe
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -S 1 || fail
+echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey -q $LOOPDEV $FAST_PBKDF_OPT -S 5 || fail
+$CRYPTSETUP config $LOOPDEV -S 0 --priority prefer && fail
+$CRYPTSETUP config $LOOPDEV -S 1 --priority bla >/dev/null 2>&1 && fail
+$CRYPTSETUP config $LOOPDEV -S 1 --priority ignore || fail
+echo $PWD1 | $CRYPTSETUP open $LOOPDEV --test-passphrase 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP open $LOOPDEV --test-passphrase -S 1 || fail
+echo $PWD2 | $CRYPTSETUP open $LOOPDEV --test-passphrase || fail
+$CRYPTSETUP config $LOOPDEV -S 1 --priority normal || fail
+echo $PWD1 | $CRYPTSETUP open $LOOPDEV --test-passphrase || fail
+$CRYPTSETUP config $LOOPDEV -S 1 --priority ignore || fail
+echo $PWD1 | $CRYPTSETUP open $LOOPDEV --test-passphrase 2>/dev/null && fail
+
+prepare "[35] LUKS label and subsystem" wipe
+echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep "Subsystem:" | grep -q "(no subsystem)" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep "Label:" | grep -q "(no label)" || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --subsystem SatelliteTwo --label TheLabel || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep "Subsystem:" | grep -q "SatelliteTwo" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep "Label:" | grep -q "TheLabel" || fail
+$CRYPTSETUP config $LOOPDEV --subsystem SatelliteThree
+$CRYPTSETUP luksDump $LOOPDEV | grep "Subsystem:" | grep -q "SatelliteThree" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep "Label:" | grep -q "(no label)" || fail
+$CRYPTSETUP config $LOOPDEV --subsystem SatelliteThree --label TheLabel
+$CRYPTSETUP luksDump $LOOPDEV | grep "Subsystem:" | grep -q "SatelliteThree" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep "Label:" | grep -q "TheLabel" || fail
+
+prepare "[36] LUKS PBKDF setting" wipe
+echo $PWD1 | $CRYPTSETUP luksFormat --type luks2 --pbkdf bla $LOOPDEV >/dev/null 2>&1 && fail
+# Force setting, no benchmark. PBKDF2 has 1000 iterations as a minimum
+echo $PWD1 | $CRYPTSETUP luksFormat --type luks2 --pbkdf pbkdf2   --pbkdf-force-iterations 999 $LOOPDEV 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf pbkdf2   --pbkdf-force-iterations 1234 $LOOPDEV || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep "Iterations:" | grep -q "1234" || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf argon2id --pbkdf-force-iterations 3 $LOOPDEV 2>/dev/null && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf argon2id --pbkdf-force-iterations 4 --pbkdf-memory 100000 $LOOPDEV || can_fail_fips
+$CRYPTSETUP luksDump $LOOPDEV | grep "PBKDF:" | grep -q "argon2id" || can_fail_fips
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf argon2i  --pbkdf-force-iterations 4 \
+	--pbkdf-memory 1234 --pbkdf-parallel 1 $LOOPDEV || can_fail_fips
+$CRYPTSETUP luksDump $LOOPDEV | grep "PBKDF:" | grep -q "argon2i" || can_fail_fips
+$CRYPTSETUP luksDump $LOOPDEV | grep "Time cost:" | grep -q "4" || can_fail_fips
+$CRYPTSETUP luksDump $LOOPDEV | grep "Memory:" | grep -q "1234" || can_fail_fips
+$CRYPTSETUP luksDump $LOOPDEV | grep "Threads:" | grep -q "1" || can_fail_fips
+# Benchmark
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf argon2i -i 500 --pbkdf-memory 1234 --pbkdf-parallel 1 $LOOPDEV || can_fail_fips
+[ 0"$($CRYPTSETUP luksDump $LOOPDEV | grep "Time cost:" | cut -d: -f 2 | sed -e 's/\ //g')" -gt 0 ] || can_fail_fips
+[ 0"$($CRYPTSETUP luksDump $LOOPDEV | grep "Memory:" | cut -d: -f 2 | sed -e 's/\ //g')" -gt 0 ] || can_fail_fips
+echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf pbkdf2 -i 500 $LOOPDEV || fail
+[ 0"$($CRYPTSETUP luksDump $LOOPDEV | grep -m1 "Iterations:" | cut -d' ' -f 2 | sed -e 's/\ //g')" -gt 1000 ] || fail
+
+prepare "[37] LUKS Keyslot convert" wipe
+$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks1 $LOOPDEV $KEY5 --key-slot 5 || fail
+$CRYPTSETUP -q luksConvertKey $LOOPDEV --key-file $KEY5 2>/dev/null && fail
+$CRYPTSETUP -q convert --type luks2 $LOOPDEV || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep "PBKDF:" | grep -q "pbkdf2" || fail
+$CRYPTSETUP -q luksConvertKey $LOOPDEV -S 5 --key-file $KEY5 --pbkdf argon2i -i1 --pbkdf-memory 32 || can_fail_fips
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || can_fail_fips
+echo $PWD1 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV -S 1 --key-file $KEY5 || fail
+$CRYPTSETUP -q luksKillSlot $LOOPDEV 5 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep "PBKDF:" | grep -q "pbkdf2" || fail
+echo $PWD1 | $CRYPTSETUP -q luksConvertKey $LOOPDEV -S 1 --pbkdf argon2i -i1 --pbkdf-memory 32 || can_fail_fips
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || can_fail_fips
+echo $PWD3 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 21 --unbound -s 72 $LOOPDEV || fail
+echo $PWD3 | $CRYPTSETUP luksConvertKey --pbkdf-force-iterations 1001 --pbkdf pbkdf2 -S 21 $LOOPDEV || fail
+
+prepare "[38] luksAddKey unbound tests" wipe
+$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY5 --key-slot 5 || fail
+# unbound key may have arbitrary size
+echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --unbound -s 72 $LOOPDEV || fail
+echo $PWD2 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT --unbound -s 72 -S 2 $LOOPDEV || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2 (unbound)" || fail
+dd if=/dev/urandom of=$KEY_FILE0 bs=64 count=1 > /dev/null 2>&1 || fail
+echo $PWD3 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT --unbound -s 512 -S 3 --volume-key-file $KEY_FILE0 $LOOPDEV || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2 (unbound)" || fail
+# unbound key size is required
+echo $PWD1 | $CRYPTSETUP -q luksAddKey --unbound $LOOPDEV 2>/dev/null && fail
+echo $PWD3 | $CRYPTSETUP -q luksAddKey --unbound --volume-key-file /dev/urandom $LOOPDEV 2> /dev/null && fail
+# do not allow one to replace keyslot by unbound slot
+echo $PWD1 | $CRYPTSETUP -q luksAddKey -S5 --unbound -s 32 $LOOPDEV 2>/dev/null && fail
+echo $PWD2 | $CRYPTSETUP -q open $LOOPDEV $DEV_NAME 2> /dev/null && fail
+echo $PWD2 | $CRYPTSETUP -q open -S2 $LOOPDEV $DEV_NAME 2> /dev/null && fail
+echo $PWD2 | $CRYPTSETUP -q open -S2 $LOOPDEV --test-passphrase || fail
+echo $PWD1 | $CRYPTSETUP -q open $LOOPDEV $DEV_NAME 2> /dev/null && fail
+# check we're able to change passphrase for unbound keyslot
+echo -e "$PWD2\n$PWD3" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT -S 2 $LOOPDEV || fail
+echo $PWD3 | $CRYPTSETUP open --test-passphrase -S 2 $LOOPDEV || fail
+echo $PWD3 | $CRYPTSETUP -q open -S 2 $LOOPDEV $DEV_NAME 2> /dev/null && fail
+# do not allow adding keyslot by unbound keyslot
+echo -e "$PWD3\n$PWD1" | $CRYPTSETUP -q luksAddKey $LOOPDEV 2> /dev/null && fail
+# check adding keyslot works when there's unbound keyslot
+echo $PWD1 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --key-file $KEY5 -S8 || fail
+echo $PWD1 | $CRYPTSETUP open $LOOPDEV $DEV_NAME || fail
+$CRYPTSETUP close $DEV_NAME || fail
+$CRYPTSETUP luksKillSlot -q $LOOPDEV 2
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2 (unbound)" && fail
+echo $PWD3 | $CRYPTSETUP luksDump --unbound --volume-key-file $KEY_FILE1 $LOOPDEV 2> /dev/null && fail
+echo $PWD3 | $CRYPTSETUP luksDump --unbound 2> /dev/null $LOOPDEV 2> /dev/null && fail
+echo $PWD3 | $CRYPTSETUP luksDump --unbound --volume-key-file $KEY_FILE1 -S3 $LOOPDEV > /dev/null || fail
+diff $KEY_FILE0 $KEY_FILE1 || fail
+echo $PWD3 | $CRYPTSETUP luksDump --unbound --volume-key-file $KEY_FILE1 -S3 $LOOPDEV 2> /dev/null && fail
+diff $KEY_FILE0 $KEY_FILE1 || fail
+rm $KEY_FILE1 || fail
+echo $PWD3 | $CRYPTSETUP luksDump --unbound --volume-key-file $KEY_FILE1 -S3 $LOOPDEV | grep -q "Unbound Key:" && fail
+echo $PWD3 | $CRYPTSETUP luksDump --unbound -S3 $LOOPDEV | grep -q "Unbound Key:" || fail
+$CRYPTSETUP luksKillSlot -q $LOOPDEV 3 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2 (unbound)" && fail
+
+prepare "[39] LUKS2 metadata variants" wipe
+tar xJf luks2_mda_images.tar.xz
+echo -n "$IMPORT_TOKEN" > $TOKEN_FILE0
+for mda in 16 32 64 128 256 512 1024 2048 4096 ; do
+	echo -n "[$mda KiB]"
+	echo $PWD4 | $CRYPTSETUP open test_image_$mda $DEV_NAME || fail
+	$CRYPTSETUP close $DEV_NAME || fail
+	echo -e "$PWD4\n$PWD3" | $CRYPTSETUP luksAddKey -q -S9 $FAST_PBKDF_OPT test_image_$mda || fail
+	echo $PWD4 | $CRYPTSETUP open --test-passphrase test_image_$mda || fail
+	echo $PWD3 | $CRYPTSETUP open -S9 --test-passphrase test_image_$mda || fail
+	echo -n "$IMPORT_TOKEN" | $CRYPTSETUP token import test_image_$mda --token-id 10 || fail
+	$CRYPTSETUP token export test_image_$mda --token-id 10 >$TOKEN_FILE1 || fail
+	diff $TOKEN_FILE1 $TOKEN_FILE0 || fail
+	echo -n "[OK]"
+done
+echo
+
+prepare "[40] LUKS2 metadata areas" wipe
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV 2> /dev/null || fail
+DEFAULT_OFFSET=$($CRYPTSETUP luksDump $LOOPDEV | grep "offset: " | cut -f 2 -d ' ')
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks1 $LOOPDEV --key-size 256 --luks2-metadata-size=128k --luks2-keyslots-size=128k 2> /dev/null && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-metadata-size=128k --luks2-keyslots-size=127k 2> /dev/null && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-metadata-size=127k --luks2-keyslots-size=128k 2> /dev/null && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-metadata-size=128k --luks2-keyslots-size=128M >/dev/null 2>&1 && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-metadata-size=128k --luks2-keyslots-size=128k >/dev/null || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep "Metadata area:" | grep -q "131072 \[bytes\]" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep "Keyslots area:" | grep -q "131072 \[bytes\]" || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-metadata-size=128k || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep "Metadata area:" | grep -q "131072 \[bytes\]" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep "Keyslots area:" | grep -q "$((DEFAULT_OFFSET-2*131072)) \[bytes\]" || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-keyslots-size=128k >/dev/null || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep "Metadata area:" | grep -q "16384 \[bytes\]" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep "Keyslots area:" | grep -q "131072 \[bytes\]" || fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --offset 16384 || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep "Metadata area:" | grep -q "16384 \[bytes\]" || fail
+$CRYPTSETUP luksDump $LOOPDEV | grep "Keyslots area:" | grep -q "8355840 \[bytes\]" || fail
+# data offset vs area size
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --offset 64 --luks2-keyslots-size=8192 >/dev/null 2>&1 && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --offset $((256+56)) >/dev/null 2>&1 && fail
+echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --offset $((256+64)) >/dev/null || fail
+
+prepare "[41] Per-keyslot encryption parameters" wipe
+KEYSLOT_CIPHER="aes-cbc-plain64"
+$CRYPTSETUP -q luksFormat --type luks2 $LOOPDEV $KEY1 $FAST_PBKDF_OPT --key-slot 0 --keyslot-cipher $KEYSLOT_CIPHER --keyslot-key-size 128 || fail
+[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "0: luks2" | grep "Cipher:"    | sed -e 's/[[:space:]]\+Cipher:\ \+//g')" = $KEYSLOT_CIPHER ] || fail
+[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "0: luks2" | grep "Cipher key:"| sed -e 's/[[:space:]]\+Cipher\ key:\ \+//g')" = "128 bits" ] || fail
+$CRYPTSETUP luksAddKey -q $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT --key-slot 1 --keyslot-cipher $KEYSLOT_CIPHER --keyslot-key-size 128 || fail
+[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "1: luks2" | grep "Cipher:"    | sed -e 's/[[:space:]]\+Cipher:\ \+//g')" = $KEYSLOT_CIPHER ] || fail
+[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "1: luks2" | grep "Cipher key:"| sed -e 's/[[:space:]]\+Cipher\ key:\ \+//g')" = "128 bits" ] || fail
+$CRYPTSETUP luksAddKey -q $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT --key-slot 2 || fail
+$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 $KEY1 --key-slot 2 --keyslot-cipher $KEYSLOT_CIPHER --keyslot-key-size 128 || fail
+[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "2: luks2" | grep "Cipher:"    | sed -e 's/[[:space:]]\+Cipher:\ \+//g')" = $KEYSLOT_CIPHER ] || fail
+[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "2: luks2" | grep "Cipher key:"| sed -e 's/[[:space:]]\+Cipher\ key:\ \+//g')" = "128 bits" ] || fail
+# unbound keyslot
+echo $PWD3 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT --key-slot 21 --unbound -s 72 --keyslot-cipher $KEYSLOT_CIPHER --keyslot-key-size 128 $LOOPDEV || fail
+[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "21: luks2" | grep "Cipher:"    | sed -e 's/[[:space:]]\+Cipher:\ \+//g')" = $KEYSLOT_CIPHER ] || fail
+[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "21: luks2" | grep "Cipher key:"| sed -e 's/[[:space:]]\+Cipher\ key:\ \+//g')" = "128 bits" ] || fail
+echo $PWD3 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT --key-slot 22 --unbound -s 72 $LOOPDEV || fail
+echo $PWD3 | $CRYPTSETUP luksConvertKey --key-slot 22 $LOOPDEV --keyslot-cipher $KEYSLOT_CIPHER --keyslot-key-size 128 $LOOPDEV || fail
+[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "22: luks2" | grep "Cipher:"    | sed -e 's/[[:space:]]\+Cipher:\ \+//g')" = $KEYSLOT_CIPHER ] || fail
+[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "22: luks2" | grep "Cipher key:"| sed -e 's/[[:space:]]\+Cipher\ key:\ \+//g')" = "128 bits" ] || fail
+
+prepare "[42] Some encryption compatibility mode tests" wipe
+CIPHERS="aes-ecb aes-cbc-null aes-cbc-plain64 aes-cbc-essiv:sha256 aes-xts-plain64"
+key_size=256
+for cipher in $CIPHERS ; do
+	echo -n "[$cipher/$key_size]"
+	$CRYPTSETUP -q luksFormat --type luks2 $LOOPDEV $KEY1 $FAST_PBKDF_OPT --cipher $cipher --key-size $key_size || fail
+done
+echo
+
+prepare "[43] New luksAddKey options." wipe
+rm -f $VK_FILE
+echo "$PWD1" | $CRYPTSETUP luksFormat --type luks2 $FAST_PBKDF_OPT $IMG || fail
+echo $PWD1 | $CRYPTSETUP luksDump -q $IMG --dump-volume-key --volume-key-file $VK_FILE >/dev/null || fail
+
+# pass pass
+echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey -q -S1 $FAST_PBKDF_OPT $IMG || fail
+echo $PWD2 | $CRYPTSETUP open -q --test-passphrase -S1 $IMG || fail
+
+# pass file
+echo "$PWD2" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S1 --new-key-slot 2 $IMG $KEY1 || fail
+$CRYPTSETUP open --test-passphrase -q -S2 -d $KEY1 $IMG || fail
+
+# file pass
+echo "$PWD3" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S2 -d $KEY1 --new-key-slot 3 $IMG || fail
+echo $PWD3 | $CRYPTSETUP open -q --test-passphrase -S3 $IMG || fail
+
+# file file
+$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S2 --new-key-slot 4 -d $KEY1 --new-keyfile $KEY2 $IMG || fail
+$CRYPTSETUP open --test-passphrase -q -S4 -d $KEY2 $IMG || fail
+
+# vk pass
+echo $PWD4 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S5 --volume-key-file $VK_FILE $IMG || fail
+echo $PWD4 | $CRYPTSETUP open -q --test-passphrase -S5 $IMG || fail
+
+# vk file
+$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S6 --volume-key-file $VK_FILE --new-keyfile $KEY5 $IMG || fail
+$CRYPTSETUP open --test-passphrase -q -S6 -d $KEY5 $IMG || fail
+
+if [ $HAVE_KEYRING -gt 0 -a -d /proc/sys/kernel/keys ]; then
+	test_and_prepare_keyring
+	load_key user $TEST_TOKEN0 $PWD1 "$TEST_KEYRING" || fail "Cannot load 32 byte user key type"
+	load_key user $TEST_TOKEN1 $PWDW "$TEST_KEYRING" || fail "Cannot load 32 byte user key type"
+	$CRYPTSETUP token add $IMG --key-description $TEST_TOKEN0 --token-id 0 -S0 || fail
+	$CRYPTSETUP token add $IMG --key-description $TEST_TOKEN1 --token-id 1 --unbound || fail
+
+	# pass token
+	echo -e "$PWD1" | $CRYPTSETUP luksAddKey -q -S7 --new-token-id 1 $FAST_PBKDF_OPT $IMG || fail
+	$CRYPTSETUP open -q --test-passphrase --token-only --token-id 1 -q $IMG || fail
+	echo $PWD1 | $CRYPTSETUP luksKillSlot $IMG 7 || fail
+	$CRYPTSETUP open -q --test-passphrase --token-only --token-id 1 -q $IMG && fail
+
+	# file token
+	$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S2 --new-key-slot 7 --new-token-id 1 -d $KEY1 $IMG || fail
+	$CRYPTSETUP open -q --test-passphrase --token-only --token-id 1 -q $IMG || fail
+	echo $PWD1 | $CRYPTSETUP luksKillSlot $IMG 7 || fail
+	$CRYPTSETUP open -q --test-passphrase --token-only --token-id 1 -q $IMG && fail
+
+	# vk token
+	$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S7 --volume-key-file $VK_FILE --new-token-id 1 $IMG || fail
+	$CRYPTSETUP open -q --test-passphrase --token-only --token-id 1 -q $IMG || fail
+	echo $PWD1 | $CRYPTSETUP luksKillSlot $IMG 7 || fail
+	$CRYPTSETUP open -q --test-passphrase --token-only --token-id 1 -q $IMG && fail
+
+	# token pass
+	echo $PWD4 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S7 --token-id 0 $IMG || fail
+	echo $PWD4 | $CRYPTSETUP open -q --test-passphrase -S7 $IMG || fail
+
+	# token file
+	echo $PWD4 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S8 --token-id 0 $IMG $KEY2 || fail
+	$CRYPTSETUP open -q --test-passphrase -S8 --key-file $KEY2 $IMG || fail
+
+	# token token
+	$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S9 --token-id 0 --new-token-id 1 $IMG || fail
+	$CRYPTSETUP open -q --test-passphrase --token-only --token-id 1 -q $IMG || fail
+	echo $PWD1 | $CRYPTSETUP luksKillSlot $IMG 9 || fail
+	$CRYPTSETUP open -q --test-passphrase --token-only --token-id 1 -q $IMG && fail
+
+	# reuse same token
+	$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S0 --new-key-slot 9 --token-id 0 --new-token-id 0 $IMG || fail
+	$CRYPTSETUP open -q --test-passphrase --token-only --token-id 0 -q $IMG || fail
+	echo $PWD1 | $CRYPTSETUP luksKillSlot $IMG 9 || fail
+
+	# reuse same token
+	$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT --token-id 0 --new-token-id 0 $IMG || fail
+	echo $PWD1 | $CRYPTSETUP luksKillSlot $IMG 9 || fail
+	$CRYPTSETUP open -q --test-passphrase --token-only --token-id 0 -q $IMG || fail
+fi
+
+remove_mapping
+exit 0