diff options
Diffstat (limited to '')
| -rwxr-xr-x | tests/compat-test | 1137 | ||||
| -rwxr-xr-x | tests/compat-test2 | 1204 |
2 files changed, 2341 insertions, 0 deletions
diff --git a/tests/compat-test b/tests/compat-test new file mode 100755 index 0000000..6dc8004 --- /dev/null +++ b/tests/compat-test @@ -0,0 +1,1137 @@ +#!/bin/bash + +PS4='$LINENO:' +[ -z "$CRYPTSETUP_PATH" ] && CRYPTSETUP_PATH=".." +CRYPTSETUP=$CRYPTSETUP_PATH/cryptsetup +CRYPTSETUP_RAW=$CRYPTSETUP + +CRYPTSETUP_VALGRIND=../.libs/cryptsetup +CRYPTSETUP_LIB_VALGRIND=../.libs + +DIFFER=./differ +DEV_NAME=dummy +DEV_NAME2=dummy2 +DEV_NAME3=dummy3 +ORIG_IMG=luks-test-orig +IMG=luks-test +IMG10=luks-test-v10 +HEADER_IMG=luks-header +KEY1=key1 +KEY2=key2 +KEY5=key5 +KEYE=keye +PWD0="compatkey" +PWD1="93R4P4pIqAH8" +PWD2="mymJeD8ivEhE" +PWD3="ocMakf3fAcQO" +PWDW="rUkL4RUryBom" +VK_FILE="compattest_vkfile" + +FAST_PBKDF_OPT="--pbkdf pbkdf2 --pbkdf-force-iterations 1000" + +LUKS_HEADER="S0-5 S6-7 S8-39 S40-71 S72-103 S104-107 S108-111 R112-131 R132-163 S164-167 S168-207 A0-591" +KEY_SLOT0="S208-211 S212-215 R216-247 A248-251 A251-255" +KEY_MATERIAL0="R4096-68096" +KEY_MATERIAL0_EXT="R4096-68096" + +KEY_SLOT1="S256-259 S260-263 R264-295 A296-299 A300-303" +KEY_MATERIAL1="R69632-133632" +KEY_MATERIAL1_EXT="S69632-133632" + +KEY_SLOT5="S448-451 S452-455 R456-487 A488-491 A492-495" +KEY_MATERIAL5="R331776-395264" +KEY_MATERIAL5_EXT="S331776-395264" + +TEST_UUID="12345678-1234-1234-1234-123456789abc" + +LOOPDEV=$(losetup -f 2>/dev/null) +FIPS_MODE=$(cat /proc/sys/crypto/fips_enabled 2>/dev/null) + +function remove_mapping() +{ + [ -b /dev/mapper/$DEV_NAME3 ] && dmsetup remove --retry $DEV_NAME3 >/dev/null 2>&1 + [ -b /dev/mapper/$DEV_NAME2 ] && dmsetup remove --retry $DEV_NAME2 >/dev/null 2>&1 + [ -b /dev/mapper/$DEV_NAME ] && dmsetup remove --retry $DEV_NAME >/dev/null 2>&1 + losetup -d $LOOPDEV >/dev/null 2>&1 + rm -f $ORIG_IMG $IMG $IMG10 $KEY1 $KEY2 $KEY5 $KEYE $HEADER_IMG $VK_FILE missing-file >/dev/null 2>&1 + rmmod scsi_debug >/dev/null 2>&1 + scsi_debug_teardown $DEV +} + +function force_uevent() +{ + DNAME=$(echo $LOOPDEV | cut -f3 -d /) + echo "change" >/sys/block/$DNAME/uevent +} + +function fail() +{ + [ -n "$1" ] && echo "$1" + remove_mapping + echo "FAILED backtrace:" + while caller $frame; do ((frame++)); done + exit 2 +} + +function fips_mode() +{ + [ -n "$FIPS_MODE" ] && [ "$FIPS_MODE" -gt 0 ] +} + +function can_fail_fips() +{ + # Ignore this fail if running in FIPS mode + fips_mode || fail $1 +} + +function skip() +{ + [ -n "$1" ] && echo "$1" + remove_mapping + [ -n "$2" ] && exit $2 + exit 77 +} + +function prepare() +{ + [ -b /dev/mapper/$DEV_NAME ] && dmsetup remove --retry $DEV_NAME >/dev/null 2>&1 + + case "$2" in + file) + remove_mapping + dd if=/dev/zero of=$IMG bs=1k count=10000 >/dev/null 2>&1 + sync + ;; + wipe) + remove_mapping + dd if=/dev/zero of=$IMG bs=1k count=10000 >/dev/null 2>&1 + sync + losetup $LOOPDEV $IMG + ;; + new) + remove_mapping + xz -cd compatimage.img.xz > $IMG + # FIXME: switch to internal loop (no losetup at all) + echo "bad" | $CRYPTSETUP luksOpen --key-slot 0 --test-passphrase $IMG 2>&1 | \ + grep "autoclear flag" && skip "WARNING: Too old kernel, test skipped." + losetup $LOOPDEV $IMG + xz -cd compatv10image.img.xz > $IMG10 + ;; + reuse | *) + if [ ! -e $IMG ]; then + xz -cd compatimage.img.xz > $IMG + losetup $LOOPDEV $IMG + fi + [ ! -e $IMG10 ] && xz -cd compatv10image.img.xz > $IMG10 + ;; + esac + + if [ ! -e $KEY1 ]; then + #dd if=/dev/urandom of=$KEY1 count=1 bs=32 >/dev/null 2>&1 + echo -n $'\x48\xc6\x74\x4f\x41\x4e\x50\xc0\x79\xc2\x2d\x5b\x5f\x68\x84\x17' >$KEY1 + echo -n $'\x9c\x03\x5e\x1b\x4d\x0f\x9a\x75\xb3\x90\x70\x32\x0a\xf8\xae\xc4'>>$KEY1 + fi + + if [ ! -e $KEY2 ]; then + dd if=/dev/urandom of=$KEY2 count=1 bs=16 >/dev/null 2>&1 + fi + + if [ ! -e $KEY5 ]; then + dd if=/dev/urandom of=$KEY5 count=1 bs=16 >/dev/null 2>&1 + fi + + if [ ! -e $KEYE ]; then + touch $KEYE + fi + + cp $IMG $ORIG_IMG + [ -n "$1" ] && echo "CASE: $1" +} + +function check() +{ + sync + [ -z "$1" ] && return + $DIFFER $ORIG_IMG $IMG $1 || fail +} + +function check_exists() +{ + [ -b /dev/mapper/$DEV_NAME ] || fail + check $1 +} + +# $1 path to scsi debug bdev +scsi_debug_teardown() { + local _tries=15; + + while [ -b "$1" -a $_tries -gt 0 ]; do + rmmod scsi_debug >/dev/null 2>&1 + if [ -b "$1" ]; then + sleep .1 + _tries=$((_tries-1)) + fi + done + + test ! -b "$1" || rmmod scsi_debug >/dev/null 2>&1 +} + +function add_scsi_device() { + scsi_debug_teardown $DEV + if [ -d /sys/module/scsi_debug ] ; then + echo "Cannot use scsi_debug module (in use or compiled-in), test skipped." + exit 77 + fi + modprobe scsi_debug $@ delay=0 >/dev/null 2>&1 + if [ $? -ne 0 ] ; then + echo "This kernel seems to not support proper scsi_debug module, test skipped." + exit 77 + fi + + sleep 1 + DEV="/dev/"$(grep -l -e scsi_debug /sys/block/*/device/model | cut -f4 -d /) + [ -b $DEV ] || fail "Cannot find $DEV." +} + +function valgrind_setup() +{ + [ -n "$VALG" ] || return + command -v valgrind >/dev/null || fail "Cannot find valgrind." + [ ! -f $CRYPTSETUP_VALGRIND ] && fail "Unable to get location of cryptsetup executable." + export LD_LIBRARY_PATH="$CRYPTSETUP_LIB_VALGRIND:$LD_LIBRARY_PATH" + CRYPTSETUP=valgrind_run + CRYPTSETUP_RAW="./valg.sh ${CRYPTSETUP_VALGRIND}" +} + +function valgrind_run() +{ + export INFOSTRING="$(basename ${BASH_SOURCE[1]})-line-${BASH_LINENO[0]}" + $CRYPTSETUP_RAW "$@" +} + +function expect_run() +{ + export INFOSTRING="$(basename ${BASH_SOURCE[1]})-line-${BASH_LINENO[0]}" + expect "$@" +} + +export LANG=C + +[ ! -x "$CRYPTSETUP" ] && skip "Cannot find $CRYPTSETUP, test skipped." +valgrind_setup + +# LUKS non-root-tests +if [ $(id -u) != 0 ]; then + $CRYPTSETUP benchmark -c aes-xts-plain64 >/dev/null 2>&1 || \ + skip "WARNING: Cannot run test without kernel userspace crypto API, test skipped." +fi + +prepare "Image in file tests (root capabilities not required)" file +echo "[1] format" +echo $PWD1 | $CRYPTSETUP luksFormat --type luks1 $IMG $FAST_PBKDF_OPT || fail +echo "[2] open" +echo $PWD0 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail +[ $? -ne 2 ] && fail "luksOpen should return EPERM exit code" +echo $PWD1 | $CRYPTSETUP luksOpen $IMG --test-passphrase || fail +# test detached header --test-passphrase +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --header $HEADER_IMG $IMG || fail +echo $PWD1 | $CRYPTSETUP open --test-passphrase $HEADER_IMG || fail +rm -f $HEADER_IMG +echo "[3] add key" +echo $PWD1 | $CRYPTSETUP luksAddKey $IMG $FAST_PBKDF_OPT 2>/dev/null && fail +echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $IMG $FAST_PBKDF_OPT || fail +echo -e "$PWD0\n$PWD1" | $CRYPTSETUP luksAddKey $IMG $FAST_PBKDF_OPT 2>/dev/null && fail +echo "[4] change key" +echo -e "$PWD1\n$PWD0\n" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT $IMG || fail +echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT $IMG 2>/dev/null && fail +[ $? -ne 2 ] && fail "luksChangeKey should return EPERM exit code" +echo "[5] remove key" +# delete active keys PWD0, PWD2 +echo $PWD1 | $CRYPTSETUP luksRemoveKey $IMG 2>/dev/null && fail +[ $? -ne 2 ] && fail "luksRemove should return EPERM exit code" +echo $PWD0 | $CRYPTSETUP luksRemoveKey $IMG || fail +echo $PWD2 | $CRYPTSETUP luksRemoveKey $IMG || fail +# check if keys were deleted +echo $PWD0 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail +[ $? -ne 1 ] && fail "luksOpen should return ENOENT exit code" +echo $PWD2 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail +[ $? -ne 1 ] && fail "luksOpen should return ENOENT exit code" +echo "[6] kill slot" +# format new luks device with active keys PWD1, PWD2 +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $IMG $FAST_PBKDF_OPT || fail +echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $IMG $FAST_PBKDF_OPT || fail +# deactivate keys by killing slots +$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 0: ENABLED" || fail +$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 1: ENABLED" || fail +$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 2: DISABLED" || fail +echo $PWD1 | $CRYPTSETUP -q luksKillSlot $IMG 0 2>/dev/null && fail +echo $PWD2 | $CRYPTSETUP -q luksKillSlot $IMG 0 || fail +$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 0: DISABLED" || fail +echo $PWD1 | $CRYPTSETUP -q luksKillSlot $IMG 1 2>/dev/null && fail +[ $? -ne 2 ] && fail "luksKill should return EPERM exit code" +echo $PWD2 | $CRYPTSETUP -q luksKillSlot $IMG 1 || fail +$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 1: DISABLED" || fail +# check if keys were deactivated +echo $PWD1 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail +echo $PWD2 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail +echo "[7] header backup" +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $IMG $FAST_PBKDF_OPT || fail +$CRYPTSETUP luksHeaderBackup $IMG --header-backup-file $HEADER_IMG || fail +echo $PWD1 | $CRYPTSETUP luksRemoveKey $IMG || fail +echo $PWD1 | $CRYPTSETUP luksOpen $IMG --test-passphrase 2>/dev/null && fail +echo "[8] header restore" +$CRYPTSETUP luksHeaderRestore -q $IMG --header-backup-file $HEADER_IMG || fail +echo $PWD1 | $CRYPTSETUP luksOpen $IMG --test-passphrase || fail +echo "[9] luksDump" +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid $TEST_UUID $IMG $KEY1 || fail +echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $IMG -d $KEY1 || fail +$CRYPTSETUP luksDump $IMG | grep -q "Key Slot 0: ENABLED" || fail +$CRYPTSETUP luksDump $IMG | grep -q $TEST_UUID || fail +echo $PWDW | $CRYPTSETUP luksDump $IMG --dump-volume-key 2>/dev/null && fail +echo $PWDW | $CRYPTSETUP luksDump $IMG --dump-master-key 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksDump $IMG --dump-volume-key | grep -q "MK dump:" || fail +echo $PWD1 | $CRYPTSETUP luksDump $IMG --dump-master-key | grep -q "MK dump:" || fail +$CRYPTSETUP luksDump -q $IMG --dump-volume-key -d $KEY1 | grep -q "MK dump:" || fail +echo $PWD1 | $CRYPTSETUP luksDump -q $IMG --dump-master-key --master-key-file $VK_FILE >/dev/null || fail +rm -f $VK_FILE +echo $PWD1 | $CRYPTSETUP luksDump -q $IMG --dump-volume-key --volume-key-file $VK_FILE >/dev/null || fail +echo $PWD1 | $CRYPTSETUP luksDump -q $IMG --dump-volume-key --volume-key-file $VK_FILE 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --volume-key-file $VK_FILE $IMG || fail + +echo "[10] uuid" +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid $TEST_UUID $IMG || fail +$CRYPTSETUP -q luksUUID $IMG | grep -q $TEST_UUID || fail + +[ $(id -u) != 0 ] && skip "WARNING: You must be root to run this test, test skipped." +[ -z "$LOOPDEV" ] && skip "WARNING: Cannot find free loop device, test skipped." +[ ! -x "$DIFFER" ] && skip "Cannot find $DIFFER, test skipped." + +# LUKS root-tests +prepare "[1] open - compat image - acceptance check" new +echo $PWD0 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail +check_exists +ORG_SHA256=$(sha256sum -b /dev/mapper/$DEV_NAME | cut -f 1 -d' ') +[ "$ORG_SHA256" = 7428e8f2436882a07eb32765086f5c899474c08b5576f556b573d2aabdf923e8 ] || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail + +# Check it can be opened from header backup as well +$CRYPTSETUP luksHeaderBackup $IMG --header-backup-file $HEADER_IMG || fail +echo $PWD0 | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME --header $HEADER_IMG || fail +check_exists +$CRYPTSETUP -q luksClose $DEV_NAME || fail +# Check restore +$CRYPTSETUP luksHeaderRestore -q $IMG --header-backup-file $HEADER_IMG || fail + +# Repeat for V1.0 header - not aligned first keyslot +if [ ! fips_mode ] ; then +echo $PWD0 | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME || fail +check_exists +ORG_SHA1=$(sha1sum -b /dev/mapper/$DEV_NAME | cut -f 1 -d' ') +[ "$ORG_SHA1" = 51b48c2471a7593ceaf14dc5e66bca86ed05f6cc ] || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail + +rm -f $HEADER_IMG +$CRYPTSETUP luksHeaderBackup $IMG10 --header-backup-file $HEADER_IMG +echo $PWD0 | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME --header $HEADER_IMG || fail +check_exists +$CRYPTSETUP -q luksClose $DEV_NAME || fail +fi + +prepare "[2] open - compat image - denial check" new +echo $PWDW | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +echo $PWDW | $CRYPTSETUP luksOpen $IMG10 $DEV_NAME 2>/dev/null && fail +check + +# All headers items and first key material section must change +prepare "[3] format" wipe +echo $PWD1 | $CRYPTSETUP -i 1000 -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks1 $LOOPDEV || fail +check "$LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0" + +prepare "[4] format using hash sha512" wipe +echo $PWD1 | $CRYPTSETUP -i 1000 -h sha512 -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks1 $LOOPDEV || fail +check "$LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0" + +prepare "[5] open" +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase || fail +echo $PWDW | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail +check_exists + +# Key Slot 1 and key material section 1 must change, the rest must not. +prepare "[6] add key" +echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $LOOPDEV || fail +check "$KEY_SLOT1 $KEY_MATERIAL1" +echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail + +# Unsuccessful Key Delete - nothing may change +prepare "[7] unsuccessful delete" +echo $PWDW | $CRYPTSETUP luksKillSlot $LOOPDEV 1 2>/dev/null && fail +$CRYPTSETUP -q luksKillSlot $LOOPDEV 8 2>/dev/null && fail +$CRYPTSETUP -q luksKillSlot $LOOPDEV 7 2>/dev/null && fail +check + +# Delete Key Test +# Key Slot 1 and key material section 1 must change, the rest must not +prepare "[8] successful delete" +$CRYPTSETUP -q luksKillSlot $LOOPDEV 1 || fail +check "$KEY_SLOT1 $KEY_MATERIAL1_EXT" +echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2> /dev/null && fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail + +# Key Slot 1 and key material section 1 must change, the rest must not +prepare "[9] add key test for key files" +echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV $KEY1 || fail +check "$KEY_SLOT1 $KEY_MATERIAL1" +$CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail + +# Key Slot 1 and key material section 1 must change, the rest must not +prepare "[10] delete key test with key1 as remaining key" +$CRYPTSETUP -d $KEY1 luksKillSlot $LOOPDEV 0 || fail +check "$KEY_SLOT0 $KEY_MATERIAL0_EXT" +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail + +# Delete last slot +prepare "[11] delete last key" wipe +echo $PWD1 | $CRYPTSETUP luksFormat --type luks1 $LOOPDEV $FAST_PBKDF_OPT || fail +echo $PWD1 | $CRYPTSETUP luksKillSlot $LOOPDEV 0 || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail + +# Format test for ESSIV, and some other parameters. +prepare "[12] parameter variation test" wipe +$CRYPTSETUP -q -i 1000 -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks1 $LOOPDEV $KEY1 || fail +check "$LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0" +$CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail + +prepare "[13] open/close - stacked devices" wipe +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $LOOPDEV $FAST_PBKDF_OPT || fail +echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 /dev/mapper/$DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail +$CRYPTSETUP -q luksClose $DEV_NAME2 || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail + +prepare "[14] format/open - passphrase on stdin & new line" wipe +# stdin defined by "-" must take even newline +#echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksFormat $LOOPDEV - || fail +echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q --key-file=- luksFormat --type luks1 $LOOPDEV || fail +echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail +echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +# now also try --key-file +echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q luksFormat --type luks1 $LOOPDEV --key-file=- || fail +echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail +# process newline if from stdin +echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q luksFormat --type luks1 $LOOPDEV || fail +echo "$PWD1" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail + +prepare "[15] UUID - use and report provided UUID" wipe +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid blah $LOOPDEV 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid $TEST_UUID $LOOPDEV || fail +tst=$($CRYPTSETUP -q luksUUID $LOOPDEV) +[ "$tst"x = "$TEST_UUID"x ] || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV || fail +$CRYPTSETUP -q luksUUID --uuid $TEST_UUID $LOOPDEV || fail +tst=$($CRYPTSETUP -q luksUUID $LOOPDEV) +[ "$tst"x = "$TEST_UUID"x ] || fail + +prepare "[16] luksFormat" wipe +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --volume-key-file /dev/urandom $LOOPDEV || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --volume-key-file /dev/urandom $LOOPDEV -d $KEY1 || fail +$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --volume-key-file /dev/urandom -s 256 --uuid $TEST_UUID $LOOPDEV $KEY1 || fail +$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail +# open by UUID +if [ -d /dev/disk/by-uuid ] ; then + force_uevent # some systems do not update loop by-uuid + $CRYPTSETUP luksOpen -d $KEY1 UUID=X$TEST_UUID $DEV_NAME 2>/dev/null && fail + $CRYPTSETUP luksOpen -d $KEY1 UUID=$TEST_UUID $DEV_NAME || fail + $CRYPTSETUP -q luksClose $DEV_NAME || fail +fi +# skip tests using empty passphrase +if [ ! fips_mode ]; then +# empty keyfile +$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEYE || fail +$CRYPTSETUP luksOpen -d $KEYE $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail +fi +# open by volume key +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT -s 256 --volume-key-file $KEY1 $LOOPDEV || fail +$CRYPTSETUP luksOpen --volume-key-file /dev/urandom $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP luksOpen --volume-key-file $KEY1 $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail +# unsupported pe-keyslot encryption +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT -s 128 --keyslot-cipher "aes-cbc-plain" $LOOPDEV 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT -s 128 --keyslot-key-size 256 $LOOPDEV 2>/dev/null && fail + +prepare "[17] AddKey volume key, passphrase and keyfile" wipe +# volumekey +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --volume-key-file /dev/zero --key-slot 3 || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: ENABLED" || fail +echo $PWD2 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --volume-key-file /dev/zero --key-slot 4 || fail +echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 4 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 4: ENABLED" || fail +echo $PWD3 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --volume-key-file /dev/null --key-slot 5 2>/dev/null && fail +$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --volume-key-file /dev/zero --key-slot 5 $KEY1 || fail +$CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 5 -d $KEY1 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: ENABLED" || fail + +# special "-" handling +$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 3 || fail +echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 - || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d - --test-passphrase || fail +echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d - $KEY2 || fail +$CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d - -d $KEY1 --test-passphrase 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d $KEY1 -d $KEY1 --test-passphrase 2>/dev/null && fail + +# [0]PWD1 [1]PWD2 [2]$KEY1/1 [3]$KEY1 [4]$KEY2 +$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 3 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: ENABLED" || fail +$CRYPTSETUP luksAddKey -q $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 3 2>/dev/null && fail +# keyfile/keyfile +$CRYPTSETUP luksAddKey -q $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 4 || fail +$CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase --key-slot 4 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 4: ENABLED" || fail +# passphrase/keyfile +echo $PWD1 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 --key-slot 0 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: ENABLED" || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 0 || fail +# passphrase/passphrase +echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --key-slot 1 || fail +echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 1 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: ENABLED" || fail +# keyfile/passphrase +echo -e "$PWD2\n" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 2 --new-keyfile-size 8 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 2: ENABLED" || fail + +prepare "[18] RemoveKey passphrase and keyfile" reuse +$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: DISABLED" || fail +$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 2>/dev/null && fail +$CRYPTSETUP luksAddKey -q $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 $KEY1 --key-slot 3 2>/dev/null || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: ENABLED" || fail +$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 --keyfile-size 1 2>/dev/null && fail +$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 4: DISABLED" || fail +# if password or keyfile is provided, batch mode must not suppress it +echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 2>/dev/null && fail +echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 -q 2>/dev/null && fail +echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 --key-file=- 2>/dev/null && fail +echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 --key-file=- -q 2>/dev/null && fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 2: ENABLED" || fail +# kill slot using passphrase from 1 +echo $PWD2 | $CRYPTSETUP luksKillSlot $LOOPDEV 2 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 2: DISABLED" || fail +# kill slot with redirected stdin +$CRYPTSETUP luksKillSlot $LOOPDEV 3 </dev/null 2>/dev/null || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 3: DISABLED" || fail +# remove key0 / slot 0 +echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: DISABLED" || fail +# last keyslot, in batch mode no passphrase needed... +$CRYPTSETUP luksKillSlot -q $LOOPDEV 1 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: DISABLED" || fail + +prepare "[19] create & status & resize" wipe +echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash xxx 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha256 --cipher aes-cbc-essiv:sha256 --offset 3 --skip 4 --readonly || fail +$CRYPTSETUP -q status $DEV_NAME | grep "offset:" | grep -q "3 sectors" || fail +$CRYPTSETUP -q status $DEV_NAME | grep "skipped:" | grep -q "4 sectors" || fail +$CRYPTSETUP -q status $DEV_NAME | grep "mode:" | grep -q "readonly" || fail +$CRYPTSETUP -q resize $DEV_NAME --size 100 || fail +$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail +$CRYPTSETUP -q resize $DEV_NAME || fail +$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "19997 sectors" || fail +$CRYPTSETUP -q resize $DEV_NAME --device-size 1M || fail +$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail +$CRYPTSETUP -q resize $DEV_NAME --device-size 512k --size 1023 >/dev/null 2>&1 && fail +$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail +$CRYPTSETUP -q resize $DEV_NAME --device-size 513 >/dev/null 2>&1 && fail +$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail +# Resize underlying loop device as well +truncate -s 16M $IMG || fail +$CRYPTSETUP -q resize $DEV_NAME || fail +$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "32765 sectors" || fail +$CRYPTSETUP -q remove $DEV_NAME || fail +$CRYPTSETUP -q status $DEV_NAME >/dev/null && fail +echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha256 $LOOPDEV || fail +$CRYPTSETUP -q remove $DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP -q create $DEV_NAME --hash sha256 $LOOPDEV || fail +$CRYPTSETUP -q remove $DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP -q create $DEV_NAME --hash sha256 --size 100 $LOOPDEV || fail +$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail +$CRYPTSETUP -q remove $DEV_NAME || fail +# 4k sector resize (if kernel supports it) +echo $PWD1 | $CRYPTSETUP -q open --type plain --hash sha256 $LOOPDEV $DEV_NAME --sector-size 4096 --size 8 >/dev/null 2>&1 +if [ $? -eq 0 ] ; then + $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "8 sectors" || fail + $CRYPTSETUP -q resize $DEV_NAME --size 16 || fail + $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "16 sectors" || fail + $CRYPTSETUP -q resize $DEV_NAME --size 9 2>/dev/null && fail + $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "16 sectors" || fail + $CRYPTSETUP -q resize $DEV_NAME --device-size 4608 2>/dev/null && fail + $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "16 sectors" || fail + $CRYPTSETUP -q remove $DEV_NAME || fail +fi +# Resize not aligned to logical block size +add_scsi_device dev_size_mb=32 sector_size=4096 +echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha256 $DEV || fail +OLD_SIZE=$($CRYPTSETUP status $DEV_NAME | grep "^ \+size:" | sed 's/.* \([0-9]\+\) .*/\1/') +$CRYPTSETUP resize $DEV_NAME -b 7 2> /dev/null && fail +dmsetup info $DEV_NAME | grep -q SUSPENDED && fail +NEW_SIZE=$($CRYPTSETUP status $DEV_NAME | grep "^ \+size:" | sed 's/.* \([0-9]\+\) .*/\1/') +test $OLD_SIZE -eq $NEW_SIZE || fail +$CRYPTSETUP close $DEV_NAME || fail +# Add check for unaligned plain crypt activation +echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha256 $DEV -b 7 2>/dev/null && fail +$CRYPTSETUP status $DEV_NAME >/dev/null 2>&1 && fail +# verify is ignored on non-tty input +echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha256 --verify-passphrase 2>/dev/null || fail +$CRYPTSETUP -q remove $DEV_NAME || fail +$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 --key-size 255 2>/dev/null && fail +$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 --key-size -1 2>/dev/null && fail +$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 -l -1 2>/dev/null && fail +$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 || fail +$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 2>/dev/null && fail +$CRYPTSETUP create $DEV_NAME $LOOPDEV -d blah 2>/dev/null && fail +$CRYPTSETUP -q remove $DEV_NAME || fail +$CRYPTSETUP create $DEV_NAME $LOOPDEV -d /dev/urandom || fail +$CRYPTSETUP -q remove $DEV_NAME || fail + +prepare "[20] Disallow open/create if already mapped." wipe +$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 || fail +$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 2>/dev/null && fail +$CRYPTSETUP create $DEV_NAME2 $LOOPDEV -d $KEY1 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $LOOPDEV 2>/dev/null && fail +$CRYPTSETUP remove $DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $LOOPDEV || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME2 2>/dev/null && fail +$CRYPTSETUP luksClose $DEV_NAME || fail + +prepare "[21] luksDump" wipe +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT --uuid $TEST_UUID $LOOPDEV $KEY1 || fail +echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: ENABLED" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q $TEST_UUID || fail +echo $PWDW | $CRYPTSETUP luksDump $LOOPDEV --dump-volume-key 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksDump $LOOPDEV --dump-volume-key | grep -q "MK dump:" || fail +$CRYPTSETUP luksDump -q $LOOPDEV --dump-volume-key -d $KEY1 | grep -q "MK dump:" || fail +echo $PWD1 | $CRYPTSETUP luksDump -q $LOOPDEV --dump-volume-key --volume-key-file $VK_FILE > /dev/null || fail +echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --volume-key-file $VK_FILE $LOOPDEV || fail + +prepare "[22] remove disappeared device" wipe +dmsetup create $DEV_NAME --table "0 5000 linear $LOOPDEV 2" || fail +echo $PWD1 | $CRYPTSETUP -q $FAST_PBKDF_OPT luksFormat --type luks1 /dev/mapper/$DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail +# underlying device now returns error but node is still present +dmsetup load $DEV_NAME --table "0 5000 error" || fail +dmsetup resume $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME2 || fail +dmsetup remove --retry $DEV_NAME || fail + +prepare "[23] ChangeKey passphrase and keyfile" wipe +# [0]$KEY1 [1]key0 +$CRYPTSETUP -q luksFormat --type luks1 $LOOPDEV $KEY1 $FAST_PBKDF_OPT --key-slot 0 || fail +echo $PWD1 | $CRYPTSETUP luksAddKey -q $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 --key-slot 1 || fail +# keyfile [0] / keyfile [0] +$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 0 || fail +# passphrase [1] / passphrase [1] +echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT --key-slot 1 || fail +# keyfile [0] / keyfile [new] +$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 $KEY1 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: DISABLED" || fail +# passphrase [1] / passphrase [new] +echo -e "$PWD2\n$PWD1\n" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT $LOOPDEV || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: DISABLED" || fail +# use all slots +$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail +$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail +$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail +$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail +$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail +$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT || fail +# still allows replace +$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 || fail +$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 2>/dev/null && fail + +prepare "[24] Keyfile limit" wipe +$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 0 -l 13 || fail +$CRYPTSETUP --key-file=$KEY1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP --key-file=$KEY1 -l 0 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP --key-file=$KEY1 -l -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP --key-file=$KEY1 -l 14 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP --key-file=$KEY1 -l 13 luksOpen $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP luksClose $DEV_NAME || fail +$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT 2>/dev/null && fail +$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 14 2>/dev/null && fail +$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l -1 2>/dev/null && fail +$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 13 --new-keyfile-size 12 || fail +$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 2>/dev/null && fail +$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 -l 12 || fail +$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT 2>/dev/null && fail +$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 14 2>/dev/null && fail +$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 13 || fail +# -l is ignored for stdin if _only_ passphrase is used +echo $PWD1 | $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY2 $FAST_PBKDF_OPT || fail +# this is stupid, but expected +echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 11 2>/dev/null && fail +echo $PWDW"0" | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 12 2>/dev/null && fail +echo -e "$PWD1\n" | $CRYPTSETUP luksRemoveKey $LOOPDEV -d- -l 12 || fail +# offset +$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 0 -l 13 --keyfile-offset 16 || fail +$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 15 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 16 luksOpen $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP luksClose $DEV_NAME || fail +$CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 -l 13 --keyfile-offset 16 $KEY2 --new-keyfile-offset 1 || fail +$CRYPTSETUP --key-file=$KEY2 --keyfile-offset 11 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP --key-file=$KEY2 --keyfile-offset 1 luksOpen $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP luksClose $DEV_NAME || fail +$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 --keyfile-offset 1 $KEY2 --new-keyfile-offset 0 || fail +$CRYPTSETUP luksOpen -d $KEY2 $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP luksClose $DEV_NAME || fail +# large device with keyfile +echo -e '0 10000000 error'\\n'10000000 1000000 zero' | dmsetup create $DEV_NAME2 || fail +$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV /dev/mapper/$DEV_NAME2 -l 13 --keyfile-offset 5120000000 || fail +$CRYPTSETUP --key-file=/dev/mapper/$DEV_NAME2 -l 13 --keyfile-offset 5119999999 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP --key-file=/dev/mapper/$DEV_NAME2 -l 13 --keyfile-offset 5120000000 luksOpen $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP luksClose $DEV_NAME || fail +$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d /dev/mapper/$DEV_NAME2 \ + --keyfile-offset 5120000000 -l 13 /dev/mapper/$DEV_NAME2 --new-keyfile-offset 5120000001 --new-keyfile-size 15 || fail +dmsetup remove --retry $DEV_NAME2 + +prepare "[25] Create shared segments" wipe +echo $PWD1 | $CRYPTSETUP create $DEV_NAME $LOOPDEV --hash sha256 --offset 0 --size 256 || fail +echo $PWD1 | $CRYPTSETUP create $DEV_NAME2 $LOOPDEV --hash sha256 --offset 512 --size 256 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP create $DEV_NAME2 $LOOPDEV --hash sha256 --offset 512 --size 256 --shared || fail +$CRYPTSETUP -q remove $DEV_NAME2 || fail +$CRYPTSETUP -q remove $DEV_NAME || fail + +prepare "[26] Suspend/Resume" wipe +# only LUKS is supported +echo $PWD1 | $CRYPTSETUP create $DEV_NAME --hash sha256 $LOOPDEV || fail +$CRYPTSETUP luksSuspend $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP -q remove $DEV_NAME || fail +$CRYPTSETUP luksSuspend $DEV_NAME 2>/dev/null && fail +# LUKS +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV || fail +echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP luksSuspend $DEV_NAME || fail +$CRYPTSETUP -q status $DEV_NAME | grep -q "(suspended)" || fail +$CRYPTSETUP -q resize $DEV_NAME 2>/dev/null && fail +echo $PWDW | $CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail +[ $? -ne 2 ] && fail "luksResume should return EPERM exit code" +echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail +# skip tests using empty passphrase +if [ ! fips_mode ]; then +echo | $CRYPTSETUP -q luksFormat -c null $FAST_PBKDF_OPT --type luks1 $LOOPDEV || fail +echo | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP luksSuspend $DEV_NAME || fail +$CRYPTSETUP -q status $DEV_NAME | grep -q "(suspended)" || fail +echo | $CRYPTSETUP luksResume $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail +fi + +prepare "[27] luksOpen/luksResume with specified key slot number" wipe +# first, let's try passphrase option +echo $PWD3 | $CRYPTSETUP luksFormat --type luks1 $FAST_PBKDF_OPT -S 5 $LOOPDEV || fail +check $LUKS_HEADER $KEY_SLOT5 $KEY_MATERIAL5 +echo $PWD3 | $CRYPTSETUP luksOpen -S 4 $LOOPDEV $DEV_NAME 2>/dev/null && fail +[ -b /dev/mapper/$DEV_NAME ] && fail +echo $PWD3 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME || fail +check_exists +$CRYPTSETUP luksSuspend $DEV_NAME || fail +echo $PWD3 | $CRYPTSETUP luksResume -S 4 $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP -q status $DEV_NAME | grep -q "(suspended)" || fail +echo $PWD3 | $CRYPTSETUP luksResume -S 5 $DEV_NAME || fail +$CRYPTSETUP luksClose $DEV_NAME || fail +echo -e "$PWD3\n$PWD1" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 0 $LOOPDEV || fail +check $LUKS_HEADER $KEY_SLOT0 $KEY_MATERIAL0 +echo $PWD3 | $CRYPTSETUP luksOpen -S 0 $LOOPDEV $DEV_NAME 2>/dev/null && fail +[ -b /dev/mapper/$DEV_NAME ] && fail +echo $PWD1 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME 2>/dev/null && fail +[ -b /dev/mapper/$DEV_NAME ] && fail +# second, try it with keyfiles +$CRYPTSETUP luksFormat --type luks1 -q -S 5 -d $KEY5 $LOOPDEV || fail +check $LUKS_HEADER $KEY_SLOT5 $KEY_MATERIAL5 +$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail +check $LUKS_HEADER $KEY_SLOT1 $KEY_MATERIAL1 +$CRYPTSETUP luksOpen -S 5 -d $KEY5 $LOOPDEV $DEV_NAME || fail +check_exists +$CRYPTSETUP luksSuspend $DEV_NAME || fail +$CRYPTSETUP luksResume -S 1 -d $KEY5 $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP -q status $DEV_NAME | grep -q "(suspended)" || fail +$CRYPTSETUP luksResume -S 5 -d $KEY5 $DEV_NAME || fail +$CRYPTSETUP luksClose $DEV_NAME || fail +$CRYPTSETUP luksOpen -S 1 -d $KEY5 $LOOPDEV $DEV_NAME 2>/dev/null && fail +[ -b /dev/mapper/$DEV_NAME ] && fail +$CRYPTSETUP luksOpen -S 5 -d $KEY1 $LOOPDEV $DEV_NAME 2>/dev/null && fail +[ -b /dev/mapper/$DEV_NAME ] && fail + +prepare "[28] Detached LUKS header" wipe +echo $PWD1 | $CRYPTSETUP luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG || fail +echo $PWD1 | $CRYPTSETUP luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --align-payload 1 >/dev/null 2>&1 && fail +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --align-payload 8192 || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --align-payload 0 || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --align-payload 8192 --offset 8192 >/dev/null 2>&1 && fail +truncate -s 4096 $HEADER_IMG +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG -S7 >/dev/null 2>&1 || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --offset 80000 >/dev/null 2>&1 || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --offset 8192 || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV --header $HEADER_IMG --offset 0 || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV-missing --header $HEADER_IMG $DEV_NAME 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail +$CRYPTSETUP -q resize $DEV_NAME --size 100 --header $HEADER_IMG || fail +$CRYPTSETUP -q status $DEV_NAME --header $HEADER_IMG | grep "size:" | grep -q "100 sectors" || fail +$CRYPTSETUP -q status $DEV_NAME | grep "type:" | grep -q "n/a" || fail +$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail +$CRYPTSETUP luksSuspend $DEV_NAME --header $HEADER_IMG || fail +echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail +$CRYPTSETUP luksSuspend $DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail +$CRYPTSETUP luksClose $DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 5 _fakedev_ --header $HEADER_IMG $KEY5 || fail +$CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "Key Slot 5: ENABLED" || fail +$CRYPTSETUP luksKillSlot -q _fakedev_ --header $HEADER_IMG 5 || fail +$CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "Key Slot 5: DISABLED" || fail +echo $PWD1 | $CRYPTSETUP open --test-passphrase $HEADER_IMG || fail + +prepare "[29] Repair metadata" wipe +$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 0 || fail +# second sector overwrite should corrupt keyslot 6+7 +dd if=/dev/urandom of=$LOOPDEV bs=512 seek=1 count=1 >/dev/null 2>&1 +$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME >/dev/null 2>&1 && fail +$CRYPTSETUP -q repair $LOOPDEV >/dev/null 2>&1 || fail +$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP luksClose $DEV_NAME || fail +# fix ecb-plain +$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY1 --hash sha256 -c aes-ecb || fail +echo -n "ecb-xxx" | dd of=$LOOPDEV bs=1 seek=40 >/dev/null 2>&1 +$CRYPTSETUP -q repair $LOOPDEV >/dev/null 2>&1 || fail +$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP luksClose $DEV_NAME || fail +# fix uppercase hash +echo -n "SHA256" | dd of=$LOOPDEV bs=1 seek=72 >/dev/null 2>&1 +$CRYPTSETUP -q repair $LOOPDEV >/dev/null 2>&1 || fail +$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP luksClose $DEV_NAME || fail + +prepare "[30] LUKS erase" wipe +$CRYPTSETUP -q luksFormat --type luks1 $FAST_PBKDF_OPT $LOOPDEV $KEY5 --key-slot 5 || fail +$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: ENABLED" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: ENABLED" || fail +$CRYPTSETUP luksErase -q $LOOPDEV || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: DISABLED" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: DISABLED" || fail + +prepare "[31] Deferred removal of device" wipe +echo $PWD1 | $CRYPTSETUP open --type plain --hash sha256 $LOOPDEV $DEV_NAME || fail +echo $PWD2 | $CRYPTSETUP open --type plain --hash sha256 /dev/mapper/$DEV_NAME $DEV_NAME2 || fail +$CRYPTSETUP close $DEV_NAME >/dev/null 2>&1 && fail +$CRYPTSETUP -q status $DEV_NAME >/dev/null 2>&1 || fail +$CRYPTSETUP close --deferred $DEV_NAME >/dev/null 2>&1 +if [ $? -eq 0 ] ; then + dmsetup info $DEV_NAME | grep -q "DEFERRED REMOVE" || fail + $CRYPTSETUP -q status $DEV_NAME >/dev/null 2>&1 || fail + $CRYPTSETUP close --cancel-deferred $DEV_NAME >/dev/null 2>&1 + dmsetup info $DEV_NAME | grep -q "DEFERRED REMOVE" >/dev/null 2>&1 && fail + $CRYPTSETUP close --deferred $DEV_NAME >/dev/null 2>&1 + $CRYPTSETUP close $DEV_NAME2 || fail + $CRYPTSETUP -q status $DEV_NAME >/dev/null 2>&1 && fail +else + $CRYPTSETUP close $DEV_NAME2 >/dev/null 2>&1 + $CRYPTSETUP close $DEV_NAME >/dev/null 2>&1 +fi + +# Interactive tests +# Do not remove sleep 0.1 below, the password query flushes TTY buffer (so the code is racy). +command -v expect >/dev/null || skip "WARNING: expect tool missing, interactive test will be skipped." 0 + +prepare "[32] Interactive password retry from terminal." new +EXPECT_DEV=$(losetup $LOOPDEV | sed -e "s/.*(\(.*\))/\1/") +EXPECT_TIMEOUT=60 + +expect_run - >/dev/null <<EOF +proc abort {} { send_error "Timeout. "; exit 2 } +set timeout $EXPECT_TIMEOUT +eval spawn $CRYPTSETUP_RAW luksOpen -v -T 2 $LOOPDEV $DEV_NAME +expect timeout abort "Enter passphrase for $EXPECT_DEV:" +sleep 0.1 +send "$PWD0 x\n" +expect timeout abort "No key available with this passphrase." +expect timeout abort "Enter passphrase for $EXPECT_DEV:" +sleep 0.1 +send "$PWD0\n" +expect timeout abort "Key slot 0 unlocked." +expect timeout abort "Command successful." +expect timeout abort eof +exit +EOF +[ $? -eq 0 ] || fail "Expect script failed." +check_exists +$CRYPTSETUP -q luksClose $DEV_NAME || fail + +prepare "[33] Interactive unsuccessful password retry from terminal." new +expect_run - >/dev/null <<EOF +proc abort {} { send_error "Timeout. "; exit 2 } +set timeout $EXPECT_TIMEOUT +eval spawn $CRYPTSETUP_RAW luksOpen -v -T 2 $LOOPDEV $DEV_NAME +expect timeout abort "Enter passphrase for $EXPECT_DEV:" +sleep 0.1 +send "$PWD0 x\n" +expect timeout abort "No key available with this passphrase." +expect timeout abort "Enter passphrase for $EXPECT_DEV:" +sleep 0.1 +send "$PWD0 y\n" +expect timeout abort "No key available with this passphrase." +expect timeout abort eof +exit +EOF +[ $? -eq 0 ] || fail "Expect script failed." + +prepare "[34] Interactive kill of last key slot." new +expect_run - >/dev/null <<EOF +proc abort {} { send_error "Timeout. "; exit 2 } +set timeout $EXPECT_TIMEOUT +eval spawn $CRYPTSETUP_RAW luksKillSlot -v $LOOPDEV 0 +expect timeout abort "Are you sure? (Type 'yes' in capital letters):" +send "YES\n" +expect timeout abort "Enter any remaining passphrase:" +sleep 0.1 +send "$PWD0\n" +expect timeout abort "Command successful." +expect timeout abort eof +eval spawn $CRYPTSETUP_RAW luksKillSlot -v $LOOPDEV 0 +expect timeout abort "Keyslot 0 is not active." +expect timeout abort eof +exit +EOF +[ $? -eq 0 ] || fail "Expect script failed." + +prepare "[35] Interactive format of device." wipe +expect_run - >/dev/null <<EOF +proc abort {} { send_error "Timeout. "; exit 2 } +set timeout $EXPECT_TIMEOUT +eval spawn $CRYPTSETUP_RAW luksFormat --type luks1 $FAST_PBKDF_OPT -v $LOOPDEV +expect timeout abort "Are you sure? (Type 'yes' in capital letters):" +send "YES\n" +expect timeout abort "Enter passphrase for $EXPECT_DEV:" +sleep 0.1 +send "$PWD0\n" +expect timeout abort "Verify passphrase:" +sleep 0.1 +send "$PWD0\n" +expect timeout abort "Command successful." +expect timeout abort eof +eval spawn $CRYPTSETUP_RAW luksOpen -v $LOOPDEV --test-passphrase +expect timeout abort "Enter passphrase for $EXPECT_DEV:" +sleep 0.1 +send "$PWD0\n" +expect timeout abort "Command successful." +expect timeout abort eof +exit +EOF +[ $? -eq 0 ] || fail "Expect script failed." + +prepare "[36] Interactive unsuccessful format of device." new +expect_run - >/dev/null <<EOF +proc abort {} { send_error "Timeout. "; exit 2 } +set timeout $EXPECT_TIMEOUT +eval spawn $CRYPTSETUP_RAW erase -v $LOOPDEV +expect timeout abort "Are you sure? (Type 'yes' in capital letters):" +send "YES\n" +expect timeout abort "Command successful." +expect timeout abort eof +eval spawn $CRYPTSETUP_RAW luksFormat --type luks1 $FAST_PBKDF_OPT -v $LOOPDEV +expect timeout abort "Are you sure? (Type 'yes' in capital letters):" +send "YES\n" +expect timeout abort "Enter passphrase for $EXPECT_DEV:" +sleep 0.1 +send "$PWD0\n" +expect timeout abort "Verify passphrase:" +sleep 0.1 +send "$PWD0 x\n" +expect timeout abort "Passphrases do not match." +expect timeout abort eof +eval spawn $CRYPTSETUP_RAW luksOpen -v $LOOPDEV -T 1 --test-passphrase +expect timeout abort "Enter passphrase for $EXPECT_DEV:" +sleep 0.1 +send "$PWD0\n" +expect timeout abort "No usable keyslot is available." +expect timeout abort eof +exit +EOF +[ $? -eq 0 ] || fail "Expect script failed." + +prepare "[37] Interactive add key." new +expect_run - >/dev/null <<EOF +proc abort {} { send_error "Timeout. "; exit 2 } +set timeout $EXPECT_TIMEOUT +eval spawn $CRYPTSETUP_RAW luksAddKey -S 2 $FAST_PBKDF_OPT -v $LOOPDEV +expect timeout abort "Enter any existing passphrase:" +sleep 0.1 +send "$PWD0\n" +expect timeout abort "Enter new passphrase for key slot:" +sleep 0.1 +send "$PWD1\n" +expect timeout abort "Verify passphrase:" +sleep 0.1 +send "$PWD1\n" +expect timeout abort "Command successful." +expect timeout abort eof +eval spawn $CRYPTSETUP_RAW luksOpen -v $LOOPDEV --test-passphrase +expect timeout abort "Enter passphrase" +sleep 0.1 +send "$PWD1\n" +expect timeout abort "Command successful." +expect timeout abort eof +eval spawn $CRYPTSETUP_RAW luksKillSlot -v $LOOPDEV 1 +expect timeout abort "Keyslot 1 is not active." +expect timeout abort eof +eval spawn $CRYPTSETUP_RAW luksKillSlot -v $LOOPDEV 2 +expect timeout abort "Enter any remaining passphrase:" +sleep 0.1 +send "$PWD0\n" +expect timeout abort "Key slot 2 removed." +expect timeout abort eof +exit +EOF +[ $? -eq 0 ] || fail "Expect script failed." + +prepare "[38] Interactive change key." new +expect_run - >/dev/null <<EOF +proc abort {} { send_error "Timeout. "; exit 2 } +set timeout $EXPECT_TIMEOUT +eval spawn $CRYPTSETUP_RAW luksChangeKey $FAST_PBKDF_OPT -v $LOOPDEV +expect timeout abort "Enter passphrase to be changed:" +sleep 0.1 +send "$PWD0\n" +expect timeout abort "Enter new passphrase:" +sleep 0.1 +send "$PWD1\n" +expect timeout abort "Verify passphrase:" +sleep 0.1 +send "$PWD1\n" +expect timeout abort "Command successful." +expect timeout abort eof +eval spawn $CRYPTSETUP_RAW luksOpen -v $LOOPDEV --test-passphrase +expect timeout abort "Enter passphrase for $EXPECT_DEV:" +sleep 0.1 +send "$PWD1\n" +expect timeout abort "Command successful." +expect timeout abort eof +exit +EOF +[ $? -eq 0 ] || fail "Expect script failed." + +prepare "[39] Interactive suspend and resume." new +echo $PWD0 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail +expect_run - >/dev/null <<EOF +proc abort {} { send_error "Timeout. "; exit 2 } +set timeout $EXPECT_TIMEOUT +eval spawn $CRYPTSETUP_RAW luksSuspend -v $DEV_NAME +expect timeout abort "Command successful." +expect timeout abort eof +eval spawn $CRYPTSETUP_RAW luksResume -v -T 3 $DEV_NAME +expect timeout abort "Enter passphrase for $EXPECT_DEV:" +sleep 0.1 +send "$PWD0 x\n" +expect timeout abort "No key available with this passphrase." +expect timeout abort "Enter passphrase for $EXPECT_DEV:" +sleep 0.1 +send "$PWD1\n" +expect timeout abort "No key available with this passphrase." +expect timeout abort "Enter passphrase for $EXPECT_DEV:" +sleep 0.1 +send "$PWD0 y\n" +expect timeout abort "No key available with this passphrase." +expect timeout abort eof +eval spawn $CRYPTSETUP_RAW luksResume -v $DEV_NAME +expect timeout abort "Enter passphrase for $EXPECT_DEV:" +sleep 0.1 +send "$PWD0\n" +expect timeout abort "Command successful." +expect timeout abort eof +exit +EOF +[ $? -eq 0 ] || fail "Expect script failed." +$CRYPTSETUP remove $DEV_NAME || fail + +prepare "[40] Long passphrase from TTY." wipe +EXPECT_DEV=$(losetup $LOOPDEV | sed -e "s/.*(\(.*\))/\1/") + +# Password of maximal length 512 characters +LONG_PWD=\ +"0123456789abcdef0123456789ABCDEF0123456789abcdef0123456789ABCDEF"\ +"Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do "\ +"eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut e"\ +"nim ad minim veniam, quis nostrud exercitation ullamco laboris n"\ +"isi ut aliquip ex ea commodo consequat. Duis aute irure dolor in"\ +" reprehenderit in voluptate velit esse cillum dolore eu fugiat n"\ +"ulla pariatur. Excepteur sint occaecat cupidatat non proident, s"\ +"unt in culpa qui officia deserunt mollit anim id est laborum.DEF" + +echo -n "$LONG_PWD" >$KEYE + +expect_run - >/dev/null <<EOF +proc abort {} { send_error "Timeout. "; exit 2 } +set timeout $EXPECT_TIMEOUT +eval spawn $CRYPTSETUP_RAW luksFormat --type luks1 $FAST_PBKDF_OPT -v $LOOPDEV +expect timeout abort "Are you sure? (Type 'yes' in capital letters):" +send "YES\n" +expect timeout abort "Enter passphrase for $EXPECT_DEV:" +sleep 0.1 +send "$LONG_PWD\n" +expect timeout abort "Verify passphrase:" +sleep 0.1 +send "$LONG_PWD\n" +expect timeout abort "Command successful." +expect timeout abort eof +eval spawn $CRYPTSETUP_RAW luksOpen -v $LOOPDEV --test-passphrase --key-file $KEYE +expect timeout abort "Command successful." +expect timeout abort eof +EOF +[ $? -eq 0 ] || fail "Expect script failed." + +prepare "[41] New luksAddKey options." file +rm -f $VK_FILE +echo "$PWD1" | $CRYPTSETUP luksFormat --type luks1 $FAST_PBKDF_OPT $IMG || fail +echo $PWD1 | $CRYPTSETUP luksDump -q $IMG --dump-volume-key --volume-key-file $VK_FILE >/dev/null || fail + +# pass pass +echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey -q -S1 $FAST_PBKDF_OPT $IMG || fail +echo $PWD2 | $CRYPTSETUP open -q --test-passphrase -S1 $IMG || fail + +# pass file +echo "$PWD2" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S1 --new-key-slot 2 $IMG $KEY1 || fail +$CRYPTSETUP open --test-passphrase -q -S2 -d $KEY1 $IMG || fail + +# file pass +echo "$PWD3" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S2 -d $KEY1 --new-key-slot 3 $IMG || fail +echo $PWD3 | $CRYPTSETUP open -q --test-passphrase -S3 $IMG || fail + +# file file +$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S2 --new-key-slot 4 -d $KEY1 --new-keyfile $KEY2 $IMG || fail +$CRYPTSETUP open --test-passphrase -q -S4 -d $KEY2 $IMG || fail + +# vk pass +echo $PWD3 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S5 --volume-key-file $VK_FILE $IMG || fail +echo $PWD3 | $CRYPTSETUP open -q --test-passphrase -S5 $IMG || fail + +# vk file +$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S6 --volume-key-file $VK_FILE --new-keyfile $KEY5 $IMG || fail +$CRYPTSETUP open --test-passphrase -q -S6 -d $KEY5 $IMG || fail + +remove_mapping +exit 0 diff --git a/tests/compat-test2 b/tests/compat-test2 new file mode 100755 index 0000000..c54dc7e --- /dev/null +++ b/tests/compat-test2 @@ -0,0 +1,1204 @@ +#!/bin/bash + +PS4='$LINENO:' +[ -z "$CRYPTSETUP_PATH" ] && CRYPTSETUP_PATH=".." +CRYPTSETUP=$CRYPTSETUP_PATH/cryptsetup + +CRYPTSETUP_VALGRIND=../.libs/cryptsetup +CRYPTSETUP_LIB_VALGRIND=../.libs + +DEV_NAME=dummy +DEV_NAME2=dummy2 +DEV_NAME3=dummy3 +ORIG_IMG=luks-test-orig +IMG=luks-test +IMG10=luks-test-v10 +HEADER_IMG=luks-header +HEADER_KEYU=luks2_keyslot_unassigned.img +HEADER_LUKS2_PV=blkid-luks2-pv.img +KEY1=key1 +KEY2=key2 +KEY5=key5 +KEYE=keye +PWD0="compatkey" +PWD1="93R4P4pIqAH8" +PWD2="mymJeD8ivEhE" +PWD3="ocMakf3fAcQO" +PWD4="Qx3qn46vq0v" +PWDW="rUkL4RUryBom" +TEST_KEYRING_NAME="compattest2_keyring" +TEST_TOKEN0="compattest2_desc0" +TEST_TOKEN1="compattest2_desc1" +TEST_TOKEN2="compattest2_desc2" +VK_FILE="compattest2_vkfile" +IMPORT_TOKEN="{\"type\":\"some_type\",\"keyslots\":[],\"base64_data\":\"zxI7vKB1Qwl4VPB4D-N-OgcC14hPCG0IDu8O7eCqaQ\"}" +TOKEN_FILE0=test-token-file0 +TOKEN_FILE1=test-token-file1 +KEY_FILE0=test-key-file0 +KEY_FILE1=test-key-file1 + +FAST_PBKDF_OPT="--pbkdf pbkdf2 --pbkdf-force-iterations 1000" + +TEST_UUID="12345678-1234-1234-1234-123456789abc" + +LOOPDEV=$(losetup -f 2>/dev/null) +FIPS_MODE=$(cat /proc/sys/crypto/fips_enabled 2>/dev/null) + +function remove_mapping() +{ + [ -b /dev/mapper/$DEV_NAME3 ] && dmsetup remove --retry $DEV_NAME3 + [ -b /dev/mapper/$DEV_NAME2 ] && dmsetup remove --retry $DEV_NAME2 + [ -b /dev/mapper/$DEV_NAME ] && dmsetup remove --retry $DEV_NAME + losetup -d $LOOPDEV >/dev/null 2>&1 + rm -f $ORIG_IMG $IMG $IMG10 $KEY1 $KEY2 $KEY5 $KEYE $HEADER_IMG $HEADER_KEYU $VK_FILE $HEADER_LUKS2_PV missing-file $TOKEN_FILE0 $TOKEN_FILE1 test_image_* $KEY_FILE0 $KEY_FILE1 >/dev/null 2>&1 + + # unlink whole test keyring + [ -n "$TEST_KEYRING" ] && keyctl unlink $TEST_KEYRING "@u" >/dev/null + unset TEST_KEYRING + + rmmod scsi_debug >/dev/null 2>&1 + scsi_debug_teardown $DEV +} + +function force_uevent() +{ + DNAME=$(echo $LOOPDEV | cut -f3 -d /) + echo "change" >/sys/block/$DNAME/uevent +} + +function fail() +{ + [ -n "$1" ] && echo "$1" + remove_mapping + echo "FAILED backtrace:" + while caller $frame; do ((frame++)); done + exit 2 +} + +function fips_mode() +{ + [ -n "$FIPS_MODE" ] && [ "$FIPS_MODE" -gt 0 ] +} + +function can_fail_fips() +{ + # Ignore this fail if running in FIPS mode + fips_mode || fail $1 +} + +function skip() +{ + [ -n "$1" ] && echo "$1" + remove_mapping + exit 77 +} + +function prepare() +{ + [ -b /dev/mapper/$DEV_NAME ] && dmsetup remove --retry $DEV_NAME + + case "$2" in + wipe) + remove_mapping + dd if=/dev/zero of=$IMG bs=1M count=40 >/dev/null 2>&1 + sync + losetup $LOOPDEV $IMG + ;; + new) + remove_mapping + xz -cd compatimage.img.xz > $IMG + xz -dk $HEADER_KEYU.xz + # FIXME: switch to internal loop (no losetup at all) + echo "bad" | $CRYPTSETUP luksOpen --key-slot 0 --test-passphrase $IMG 2>&1 | \ + grep "autoclear flag" && skip "WARNING: Too old kernel, test skipped." + losetup $LOOPDEV $IMG + xz -cd compatv10image.img.xz > $IMG10 + ;; + reuse | *) + if [ ! -e $IMG ]; then + xz -cd compatimage.img.xz > $IMG + losetup $LOOPDEV $IMG + fi + [ ! -e $IMG10 ] && xz -cd compatv10image.img.xz > $IMG10 + ;; + esac + + if [ ! -e $KEY1 ]; then + #dd if=/dev/urandom of=$KEY1 count=1 bs=32 >/dev/null 2>&1 + echo -n $'\x48\xc6\x74\x4f\x41\x4e\x50\xc0\x79\xc2\x2d\x5b\x5f\x68\x84\x17' >$KEY1 + echo -n $'\x9c\x03\x5e\x1b\x4d\x0f\x9a\x75\xb3\x90\x70\x32\x0a\xf8\xae\xc4'>>$KEY1 + fi + + if [ ! -e $KEY2 ]; then + dd if=/dev/urandom of=$KEY2 count=1 bs=16 >/dev/null 2>&1 + fi + + if [ ! -e $KEY5 ]; then + dd if=/dev/urandom of=$KEY5 count=1 bs=16 >/dev/null 2>&1 + fi + + if [ ! -e $KEYE ]; then + touch $KEYE + fi + + cp $IMG $ORIG_IMG + [ -n "$1" ] && echo "CASE: $1" +} + +function check_exists() +{ + [ -b /dev/mapper/$DEV_NAME ] || fail +} + +function valgrind_setup() +{ + command -v valgrind >/dev/null || fail "Cannot find valgrind." + [ ! -f $CRYPTSETUP_VALGRIND ] && fail "Unable to get location of cryptsetup executable." + export LD_LIBRARY_PATH="$CRYPTSETUP_LIB_VALGRIND:$LD_LIBRARY_PATH" +} + +function valgrind_run() +{ + INFOSTRING="$(basename ${BASH_SOURCE[1]})-line-${BASH_LINENO[0]}" ./valg.sh ${CRYPTSETUP_VALGRIND} "$@" +} + +function dm_crypt_keyring_support() +{ + VER_STR=$(dmsetup targets | grep crypt | cut -f2 -dv) + [ -z "$VER_STR" ] && fail "Failed to parse dm-crypt version." + + VER_MAJ=$(echo $VER_STR | cut -f 1 -d.) + VER_MIN=$(echo $VER_STR | cut -f 2 -d.) + VER_PTC=$(echo $VER_STR | cut -f 3 -d.) + + test -d /proc/sys/kernel/keys || return 1 + + [ $VER_MAJ -gt 1 ] && return 0 + [ $VER_MAJ -eq 1 -a $VER_MIN -gt 18 ] && return 0 + [ $VER_MAJ -eq 1 -a $VER_MIN -eq 18 -a $VER_PTC -ge 1 ] && return 0 + return 1 +} + +function dm_crypt_keyring_flawed() +{ + dm_crypt_keyring_support && return 1; + + [ $VER_MAJ -gt 1 ] && return 0 + [ $VER_MAJ -eq 1 -a $VER_MIN -ge 15 ] && return 0 + return 1 +} + +function dm_crypt_keyring_new_kernel() +{ + KER_STR=$(uname -r) + [ -z "$KER_STR" ] && fail "Failed to parse kernel version." + KER_MAJ=$(echo $KER_STR | cut -f 1 -d.) + KER_MIN=$(echo $KER_STR | cut -f 2 -d.) + + [ $KER_MAJ -ge 5 ] && return 0 + [ $KER_MAJ -eq 4 -a $KER_MIN -ge 15 ] && return 0 + return 1 +} + +function dm_crypt_sector_size_support() +{ + VER_STR=$(dmsetup targets | grep crypt | cut -f2 -dv) + [ -z "$VER_STR" ] && fail "Failed to parse dm-crypt version." + + VER_MAJ=$(echo $VER_STR | cut -f 1 -d.) + VER_MIN=$(echo $VER_STR | cut -f 2 -d.) + VER_PTC=$(echo $VER_STR | cut -f 3 -d.) + + if [ $VER_MIN -ge 17 -o \( $VER_MIN -eq 14 -a $VER_PTC -ge 5 \) ]; then + return 0 + fi + + return 1 +} + +function test_and_prepare_keyring() { + command -v keyctl >/dev/null || skip "Cannot find keyctl, test skipped" + keyctl list "@s" > /dev/null || skip "Current session keyring is unreachable, test skipped" + TEST_KEYRING=$(keyctl newring $TEST_KEYRING_NAME "@u" 2> /dev/null) + test -n "$TEST_KEYRING" || skip "Failed to create keyring in user keyring" + keyctl search "@s" keyring "$TEST_KEYRING" > /dev/null 2>&1 || keyctl link "@u" "@s" > /dev/null 2>&1 + load_key user test_key test_data "$TEST_KEYRING" || skip "Kernel keyring service is useless on this system, test skipped." +} + +# $1 type +# $2 description +# $3 payload +# $4 keyring +function load_key() +{ + keyctl add $@ >/dev/null +} + +function setup_luks2_env() { + echo $PWD1 | $CRYPTSETUP luksFormat --type luks2 $FAST_PBKDF_OPT $LOOPDEV || fail + $CRYPTSETUP luksDump $LOOPDEV >/dev/null || fail + echo $PWD1 | $CRYPTSETUP open $LOOPDEV $DEV_NAME || fail + HAVE_KEYRING=$($CRYPTSETUP status $DEV_NAME | grep "keyring") + if [ -n "$HAVE_KEYRING" ]; then + HAVE_KEYRING=1 + else + HAVE_KEYRING=0 + fi + if $($CRYPTSETUP --version | grep -q "BLKID"); then + HAVE_BLKID=1 + else + HAVE_BLKID=0 + fi + $CRYPTSETUP close $DEV_NAME || fail +} + +# $1 path to scsi debug bdev +scsi_debug_teardown() { + local _tries=15; + + while [ -b "$1" -a $_tries -gt 0 ]; do + rmmod scsi_debug >/dev/null 2>&1 + if [ -b "$1" ]; then + sleep .1 + _tries=$((_tries-1)) + fi + done + + test ! -b "$1" || rmmod scsi_debug >/dev/null 2>&1 +} + +function add_scsi_device() { + scsi_debug_teardown $DEV + if [ -d /sys/module/scsi_debug ] ; then + echo "Cannot use scsi_debug module (in use or compiled-in), test skipped." + exit 77 + fi + modprobe scsi_debug $@ delay=0 >/dev/null 2>&1 + if [ $? -ne 0 ] ; then + echo "This kernel seems to not support proper scsi_debug module, test skipped." + exit 77 + fi + + sleep 1 + DEV="/dev/"$(grep -l -e scsi_debug /sys/block/*/device/model | cut -f4 -d /) + [ -b $DEV ] || fail "Cannot find $DEV." +} + +export LANG=C + +[ ! -x "$CRYPTSETUP" ] && skip "Cannot find $CRYPTSETUP, test skipped." +[ $(id -u) != 0 ] && skip "WARNING: You must be root to run this test, test skipped." +[ -z "$LOOPDEV" ] && skip "WARNING: Cannot find free loop device, test skipped." + +prepare "[0] Detect LUKS2 environment" wipe +setup_luks2_env + +[ -n "$VALG" ] && valgrind_setup && CRYPTSETUP=valgrind_run + +prepare "[1] Data offset" wipe +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --offset 1 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --offset 16385 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --offset 32 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --align-payload 16384 --offset 16384 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --offset 16384 || fail +$CRYPTSETUP -q luksDump $LOOPDEV | grep -q "offset: $((512 * 16384)) \[bytes\]" || fail +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 1024 --offset 16384 >/dev/null || fail +$CRYPTSETUP -q luksDump $LOOPDEV | grep -q "offset: $((512 * 16384)) \[bytes\]" || fail +truncate -s 4096 $HEADER_IMG +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG -q --offset 80000 >/dev/null 2>&1 || fail + +prepare "[2] Sector size and old payload alignment" wipe +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 511 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 256 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 8192 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 512 || fail +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --align-payload 5 || fail +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 512 --align-payload 5 || fail +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 2048 --align-payload 32 >/dev/null || fail +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 4096 >/dev/null || fail +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 2048 --align-payload 32768 >/dev/null || fail +$CRYPTSETUP -q luksDump $LOOPDEV | grep -q "offset: $((512 * 32768)) \[bytes\]" || fail +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 2048 >/dev/null || fail +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -q --sector-size 4096 --align-payload 32768 >/dev/null || fail +$CRYPTSETUP -q luksDump $LOOPDEV | grep -q "offset: $((512 * 32768)) \[bytes\]" || fail + +prepare "[3] format" wipe +echo $PWD1 | $CRYPTSETUP -q $FAST_PBKDF_OPT -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks2 $LOOPDEV || fail +prepare "[4] format using hash sha512" wipe +echo $PWD1 | $CRYPTSETUP $FAST_PBKDF_OPT -h sha512 -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks2 $LOOPDEV || fail +$CRYPTSETUP -q luksDump $LOOPDEV | grep "0: pbkdf2" -A2 | grep "Hash:" | grep -qe sha512 || fail +# Check JSON dump for some mandatory section +$CRYPTSETUP -q luksDump $LOOPDEV --dump-json-metadata | grep -q '"tokens":' || fail + +prepare "[5] open" +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase || fail +echo $PWDW | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME --test-passphrase 2>/dev/null && fail +[ $? -ne 2 ] && fail "luksOpen should return EPERM exit code" +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail +check_exists + +# Key Slot 1 and key material section 1 must change, the rest must not. +prepare "[6] add key" +echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT || fail +echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail + +# Unsuccessful Key Delete - nothing may change +prepare "[7] unsuccessful delete" +echo $PWDW | $CRYPTSETUP luksKillSlot $LOOPDEV 1 2>/dev/null && fail +[ $? -ne 2 ] && fail "luksKillSlot should return EPERM exit code" +#FIXME +#$CRYPTSETUP -q luksKillSlot $LOOPDEV 8 2>/dev/null && fail +#$CRYPTSETUP -q luksKillSlot $LOOPDEV 7 2>/dev/null && fail + +# Delete Key Test +# Key Slot 1 and key material section 1 must change, the rest must not +prepare "[8] successful delete" +$CRYPTSETUP -q luksKillSlot $LOOPDEV 1 || fail +echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2> /dev/null && fail +[ $? -ne 2 ] && fail "luksOpen should return EPERM exit code" +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail + +# Key Slot 1 and key material section 1 must change, the rest must not +prepare "[9] add key test for key files" +echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV $KEY1 || fail +$CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail + +# Key Slot 1 and key material section 1 must change, the rest must not +prepare "[10] delete key test with key1 as remaining key" +$CRYPTSETUP -d $KEY1 luksKillSlot $LOOPDEV 0 || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail + +# Delete last slot +prepare "[11] delete last key" wipe +echo $PWD1 | $CRYPTSETUP luksFormat --type luks2 $LOOPDEV $FAST_PBKDF_OPT || fail +echo $PWD1 | $CRYPTSETUP luksKillSlot $LOOPDEV 0 || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail + +# Format test for ESSIV, and some other parameters. +prepare "[12] parameter variation test" wipe +$CRYPTSETUP -q $FAST_PBKDF_OPT -c aes-cbc-essiv:sha256 -s 128 luksFormat --type luks2 $LOOPDEV $KEY1 || fail +$CRYPTSETUP -d $KEY1 luksOpen $LOOPDEV $DEV_NAME || fail + +prepare "[13] open/close - stacked devices" wipe +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 $LOOPDEV $FAST_PBKDF_OPT || fail +echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 /dev/mapper/$DEV_NAME $FAST_PBKDF_OPT || fail +echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail +$CRYPTSETUP -q luksClose $DEV_NAME2 || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail + +prepare "[14] format/open - passphrase on stdin & new line" wipe +# stdin defined by "-" must take even newline +#echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksFormat $LOOPDEV - || fail +echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q --key-file=- luksFormat --type luks2 $LOOPDEV || fail +echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail +echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +# now also try --key-file +echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q luksFormat --type luks2 $LOOPDEV --key-file=- || fail +echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP -q --key-file=- luksOpen $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail +# process newline if from stdin +echo -n -e "$PWD1\n$PWD2" | $CRYPTSETUP $FAST_PBKDF_OPT -q luksFormat --type luks2 $LOOPDEV || fail +echo "$PWD1" | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail + +prepare "[15] UUID - use and report provided UUID" wipe +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --uuid blah --type luks2 $LOOPDEV 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --uuid $TEST_UUID --type luks2 $LOOPDEV || fail +tst=$($CRYPTSETUP -q luksUUID $LOOPDEV) +[ "$tst"x = "$TEST_UUID"x ] || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail +$CRYPTSETUP -q luksUUID --uuid $TEST_UUID $LOOPDEV || fail +tst=$($CRYPTSETUP -q luksUUID $LOOPDEV) +[ "$tst"x = "$TEST_UUID"x ] || fail + +prepare "[16] luksFormat" wipe +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --volume-key-file /dev/urandom --type luks2 $LOOPDEV || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --volume-key-file /dev/urandom --type luks2 $LOOPDEV -d $KEY1 || fail +$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --volume-key-file /dev/urandom -s 256 --uuid $TEST_UUID --type luks2 $LOOPDEV $KEY1 || fail +$CRYPTSETUP luksOpen -d $KEY1 $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail +# open by UUID +if [ -d /dev/disk/by-uuid ] ; then + force_uevent # some systems do not update loop by-uuid + $CRYPTSETUP luksOpen -d $KEY1 UUID=X$TEST_UUID $DEV_NAME 2>/dev/null && fail + $CRYPTSETUP luksOpen -d $KEY1 UUID=$TEST_UUID $DEV_NAME || fail + $CRYPTSETUP -q luksClose $DEV_NAME || fail +fi +# skip tests using empty passphrases +if [ ! fips_mode ]; then +# empty keyfile +$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEYE || fail +$CRYPTSETUP luksOpen -d $KEYE $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail +fi + +# open by volume key +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT -s 256 --volume-key-file $KEY1 --type luks2 $LOOPDEV || fail +$CRYPTSETUP luksOpen --volume-key-file /dev/urandom $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP luksOpen --volume-key-file $KEY1 $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail + +prepare "[17] AddKey volume key, passphrase and keyfile" wipe +# volumekey +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --volume-key-file /dev/zero --key-slot 3 || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2" || fail +echo $PWD2 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --volume-key-file /dev/zero --key-slot 4 || fail +echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 4 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "4: luks2" || fail +echo $PWD3 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --volume-key-file /dev/null --key-slot 5 2>/dev/null && fail +$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --volume-key-file /dev/zero --key-slot 5 $KEY1 || fail +$CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 5 -d $KEY1 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || fail + +# special "-" handling +$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY1 --key-slot 3 || fail +echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 - || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d - --test-passphrase || fail +echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d - $KEY2 || fail +$CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d - -d $KEY1 --test-passphrase 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV -d $KEY1 -d $KEY1 --test-passphrase 2>/dev/null && fail + +# [0]PWD1 [1]PWD2 [2]$KEY1/1 [3]$KEY1 [4]$KEY2 +$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY1 --key-slot 3 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2" || fail +$CRYPTSETUP luksAddKey -q $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 3 2>/dev/null && fail +# keyfile/keyfile +$CRYPTSETUP luksAddKey -q $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 4 || fail +$CRYPTSETUP luksOpen $LOOPDEV -d $KEY2 --test-passphrase --key-slot 4 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "4: luks2" || fail +# passphrase/keyfile +echo $PWD1 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 --key-slot 0 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 0 || fail +# passphrase/passphrase +echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --key-slot 1 || fail +echo $PWD2 | $CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 1 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail +# keyfile/passphrase +echo -e "$PWD2\n" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV $KEY1 --key-slot 2 --new-keyfile-size 8 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2" || fail + +prepare "[18] RemoveKey passphrase and keyfile" reuse +$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2" || fail +$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2" && fail +$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY1 2>/dev/null && fail +[ $? -ne 2 ] && fail "luksRemoveKey should return EPERM exit code" +$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 --keyfile-size 1 2>/dev/null && fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "4: luks2" || fail +$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "4: luks2" && fail +# if password or keyfile is provided, batch mode must not suppress it +echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 2>/dev/null && fail +echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 -q 2>/dev/null && fail +echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 --key-file=- 2>/dev/null && fail +echo "badpw" | $CRYPTSETUP luksKillSlot $LOOPDEV 2 --key-file=- -q 2>/dev/null && fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2" || fail +# kill slot using passphrase from 1 +echo $PWD2 | $CRYPTSETUP luksKillSlot $LOOPDEV 2 2>/dev/null || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2" && fail +# remove key0 / slot 0 +echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" && fail +# last keyslot, in batch mode no passphrase needed... +$CRYPTSETUP luksKillSlot -q $LOOPDEV 1 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" && fail + +prepare "[19] create & status & resize" wipe +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail +if dm_crypt_keyring_support; then + echo | $CRYPTSETUP -q resize --size 100 $DEV_NAME 2>/dev/null && fail + if [ $HAVE_KEYRING -gt 0 -a -d /proc/sys/kernel/keys ]; then + test_and_prepare_keyring + load_key user $TEST_TOKEN2 $PWD1 "$TEST_KEYRING" || skip "Kernel keyring service is useless on this system, test skipped." + $CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN2 --token-id 1 || fail + $CRYPTSETUP -q resize --size 99 $DEV_NAME <&- || fail + $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "99 sectors" || fail + #replace kernel key with wrong pass + load_key user $TEST_TOKEN2 $PWD2 "$TEST_KEYRING" || skip "Kernel keyring service is useless on this system, test skipped." + # must fail due to --token-only + echo $PWD1 | $CRYPTSETUP -q resize --token-only --size 100 $DEV_NAME && fail + $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" && fail + fi +fi +echo $PWD1 | $CRYPTSETUP -q resize --size 100 $DEV_NAME || fail +$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail +echo $PWD1 | $CRYPTSETUP -q resize --device-size 51200 $DEV_NAME || fail +$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail +echo $PWD1 | $CRYPTSETUP -q resize --device-size 1M $DEV_NAME || fail +$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail +echo $PWD1 | $CRYPTSETUP -q resize --device-size 512k --size 1024 $DEV_NAME > /dev/null 2>&1 && fail +echo $PWD1 | $CRYPTSETUP -q resize --device-size 4097 $DEV_NAME > /dev/null 2>&1 && fail +$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail +$CRYPTSETUP close $DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP luksOpen --disable-keyring $LOOPDEV $DEV_NAME || fail +echo | $CRYPTSETUP -q resize --size 100 $DEV_NAME || fail +$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail +$CRYPTSETUP close $DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail +if dm_crypt_keyring_support; then + $CRYPTSETUP -q resize --disable-keyring --size 100 $DEV_NAME 2>/dev/null && fail +fi +if dm_crypt_sector_size_support; then + $CRYPTSETUP close $DEV_NAME || fail + echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 --sector-size 4096 $LOOPDEV > /dev/null || fail + echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail + echo $PWD1 | $CRYPTSETUP -q resize --device-size 1M $DEV_NAME || fail + $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail + echo $PWD1 | $CRYPTSETUP -q resize --device-size 2049s $DEV_NAME > /dev/null 2>&1 && fail + echo $PWD1 | $CRYPTSETUP -q resize --size 2049 $DEV_NAME > /dev/null 2>&1 && fail + $CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "2048 sectors" || fail +fi +$CRYPTSETUP close $DEV_NAME || fail +# Resize not aligned to logical block size +add_scsi_device dev_size_mb=32 sector_size=4096 +echo $PWD1 | $CRYPTSETUP luksFormat --type luks2 $FAST_PBKDF_OPT $DEV || fail +echo $PWD1 | $CRYPTSETUP open $DEV $DEV_NAME || fail +OLD_SIZE=$($CRYPTSETUP status $DEV_NAME | grep "^ \+size:" | sed 's/.* \([0-9]\+\) .*/\1/') #' +echo $PWD1 | $CRYPTSETUP resize $DEV_NAME -b 7 2> /dev/null && fail +dmsetup info $DEV_NAME | grep -q SUSPENDED && fail +NEW_SIZE=$($CRYPTSETUP status $DEV_NAME | grep "^ \+size:" | sed 's/.* \([0-9]\+\) .*/\1/') #' +test $OLD_SIZE -eq $NEW_SIZE || fail +$CRYPTSETUP close $DEV_NAME || fail + +prepare "[20] Disallow open/create if already mapped." wipe +$CRYPTSETUP create $DEV_NAME $LOOPDEV -d $KEY1 || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV 2>/dev/null && fail +$CRYPTSETUP remove $DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV $DEV_NAME2 2>/dev/null && fail +$CRYPTSETUP luksClose $DEV_NAME || fail + +prepare "[21] luksDump" wipe +echo $PWD1 | $CRYPTSETUP -q luksFormat --key-size 256 $FAST_PBKDF_OPT --uuid $TEST_UUID --type luks2 $LOOPDEV $KEY1 || fail +echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT $LOOPDEV -d $KEY1 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q $TEST_UUID || fail +echo $PWDW | $CRYPTSETUP luksDump $LOOPDEV --dump-volume-key 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksDump $LOOPDEV --dump-volume-key | grep -q "MK dump:" || fail +$CRYPTSETUP luksDump -q $LOOPDEV --dump-volume-key -d $KEY1 | grep -q "MK dump:" || fail +echo $PWD1 | $CRYPTSETUP luksDump -q $LOOPDEV --dump-master-key --master-key-file $VK_FILE >/dev/null || fail +rm -f $VK_FILE +echo $PWD1 | $CRYPTSETUP luksDump -q $LOOPDEV --dump-volume-key --volume-key-file $VK_FILE >/dev/null || fail +echo $PWD1 | $CRYPTSETUP luksDump -q $LOOPDEV --dump-volume-key --volume-key-file $VK_FILE 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --volume-key-file $VK_FILE $LOOPDEV || fail +# Use volume key file without keyslots +$CRYPTSETUP luksErase -q $LOOPDEV || fail +$CRYPTSETUP luksOpen --volume-key-file $VK_FILE --key-size 256 --test-passphrase $LOOPDEV || fail +echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --volume-key-file $VK_FILE --key-size 256 $LOOPDEV || fail +echo $PWD1 | $CRYPTSETUP luksOpen --test-passphrase $LOOPDEV || fail + +prepare "[22] remove disappeared device" wipe +dmsetup create $DEV_NAME --table "0 39998 linear $LOOPDEV 2" || fail +echo $PWD1 | $CRYPTSETUP -q $FAST_PBKDF_OPT luksFormat --type luks2 /dev/mapper/$DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP -q luksOpen /dev/mapper/$DEV_NAME $DEV_NAME2 || fail +# underlying device now returns error but node is still present +dmsetup load $DEV_NAME --table "0 40000 error" || fail +dmsetup resume $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME2 || fail +dmsetup remove --retry $DEV_NAME || fail + +prepare "[23] ChangeKey passphrase and keyfile" wipe +# [0]$KEY1 [1]key0 +$CRYPTSETUP -q luksFormat --type luks2 $LOOPDEV $KEY1 $FAST_PBKDF_OPT --key-slot 0 --key-size 256 --luks2-keyslots-size 256k >/dev/null || fail +echo $PWD1 | $CRYPTSETUP luksAddKey -q $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 --key-slot 1 || fail +# keyfile [0] / keyfile [0] +$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 --key-slot 0 || fail +# passphrase [1] / passphrase [1] +echo -e "$PWD1\n$PWD2\n" | $CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT --key-slot 1 || fail +# keyfile [0] / keyfile [new] - with LUKS2 it should stay +$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 $KEY1 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2" && fail +# passphrase [1] / passphrase [new] +echo -e "$PWD2\n$PWD1\n" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT $LOOPDEV || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2" && fail +# test out of raw area, change in-place (space only for 2 keyslots) +$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "0: luks2" || fail +$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 $KEY2 2>/dev/null && fail + +prepare "[24] Keyfile limit" wipe +$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY1 --key-slot 0 -l 13 || fail +$CRYPTSETUP --key-file=$KEY1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP --key-file=$KEY1 -l 0 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP --key-file=$KEY1 -l -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP --key-file=$KEY1 -l 14 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset -1 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP --key-file=$KEY1 -l 13 luksOpen $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP luksClose $DEV_NAME || fail +$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 2>/dev/null && fail +$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -l 14 2>/dev/null && fail +$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 -l -1 2>/dev/null && fail +$CRYPTSETUP luksAddKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 13 --new-keyfile-size 12 || fail +$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 2>/dev/null && fail +$CRYPTSETUP luksRemoveKey $LOOPDEV $KEY2 -l 12 || fail +$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 2>/dev/null && fail +[ $? -ne 2 ] && fail "luksChangeKey should return EPERM exit code" +$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 -l 14 2>/dev/null && fail +$CRYPTSETUP luksChangeKey $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT -l 13 || fail +# -l is ignored for stdin if _only_ passphrase is used +echo $PWD1 | $CRYPTSETUP luksAddKey $LOOPDEV -d $KEY2 $FAST_PBKDF_OPT || fail +# this is stupid, but expected +echo $PWD1 | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 11 2>/dev/null && fail +echo $PWDW"0" | $CRYPTSETUP luksRemoveKey $LOOPDEV -l 12 2>/dev/null && fail +echo -e "$PWD1\n" | $CRYPTSETUP luksRemoveKey $LOOPDEV -d- -l 12 || fail +# offset +$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY1 --key-slot 0 -l 13 --keyfile-offset 16 || fail +$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 15 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP --key-file=$KEY1 -l 13 --keyfile-offset 16 luksOpen $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP luksClose $DEV_NAME || fail +$CRYPTSETUP luksAddKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY1 -l 13 --keyfile-offset 16 $KEY2 --new-keyfile-offset 1 || fail +$CRYPTSETUP --key-file=$KEY2 --keyfile-offset 11 luksOpen $LOOPDEV $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP --key-file=$KEY2 --keyfile-offset 1 luksOpen $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP luksClose $DEV_NAME || fail +$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 --keyfile-offset 1 $KEY2 --new-keyfile-offset 0 || fail +$CRYPTSETUP luksOpen -d $KEY2 $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP luksClose $DEV_NAME || fail + +prepare "[26] Suspend/Resume" wipe +# LUKS +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail +echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP luksSuspend $DEV_NAME || fail +$CRYPTSETUP -q status $DEV_NAME | grep -q "(suspended)" || fail +$CRYPTSETUP -q resize $DEV_NAME 2>/dev/null && fail +echo $PWDW | $CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail +[ $? -ne 2 ] && fail "luksResume should return EPERM exit code" +echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat -c null $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail +echo $PWD1 | $CRYPTSETUP -q luksOpen $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP luksSuspend $DEV_NAME || fail +$CRYPTSETUP -q status $DEV_NAME | grep -q "(suspended)" || fail +echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME || fail +$CRYPTSETUP -q luksClose $DEV_NAME || fail + +prepare "[27] luksOpen/Resume with specified key slot number" wipe +# first, let's try passphrase option +echo $PWD3 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT -S 5 --type luks2 $LOOPDEV || fail +echo $PWD3 | $CRYPTSETUP luksOpen -S 4 $LOOPDEV $DEV_NAME 2>/dev/null && fail +[ -b /dev/mapper/$DEV_NAME ] && fail +echo $PWD3 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME || fail +check_exists +$CRYPTSETUP luksSuspend $DEV_NAME || fail +echo $PWD3 | $CRYPTSETUP luksResume -S 4 $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP -q status $DEV_NAME | grep -q "(suspended)" || fail +echo $PWD3 | $CRYPTSETUP luksResume -S 5 $DEV_NAME || fail +$CRYPTSETUP luksClose $DEV_NAME || fail +echo -e "$PWD3\n$PWD1" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 0 $LOOPDEV || fail +echo $PWD3 | $CRYPTSETUP luksOpen -S 0 $LOOPDEV $DEV_NAME 2>/dev/null && fail +[ -b /dev/mapper/$DEV_NAME ] && fail +echo $PWD1 | $CRYPTSETUP luksOpen -S 5 $LOOPDEV $DEV_NAME 2>/dev/null && fail +[ -b /dev/mapper/$DEV_NAME ] && fail +# second, try it with keyfiles +$CRYPTSETUP -q luksFormat -q -S 5 $FAST_PBKDF_OPT -d $KEY5 --type luks2 $LOOPDEV || fail +$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail +$CRYPTSETUP luksOpen -S 5 -d $KEY5 $LOOPDEV $DEV_NAME || fail +check_exists +$CRYPTSETUP luksSuspend $DEV_NAME || fail +$CRYPTSETUP luksResume -S 1 -d $KEY5 $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP -q status $DEV_NAME | grep -q "(suspended)" || fail +$CRYPTSETUP luksResume -S 5 -d $KEY5 $DEV_NAME || fail +$CRYPTSETUP luksClose $DEV_NAME || fail +$CRYPTSETUP luksOpen -S 1 -d $KEY5 $LOOPDEV $DEV_NAME 2>/dev/null && fail +[ -b /dev/mapper/$DEV_NAME ] && fail +$CRYPTSETUP luksOpen -S 5 -d $KEY1 $LOOPDEV $DEV_NAME 2>/dev/null && fail +[ -b /dev/mapper/$DEV_NAME ] && fail +# test keyslot not assigned to segment is unable to unlock volume +# otoh it should be allowed to test for proper passphrase +prepare "" new +echo $PWD1 | $CRYPTSETUP open -S1 --test-passphrase $HEADER_KEYU || fail +echo $PWD1 | $CRYPTSETUP open --unbound --test-passphrase $HEADER_KEYU || fail +echo $PWD1 | $CRYPTSETUP open -S1 $HEADER_KEYU $DEV_NAME 2>/dev/null && fail +[ -b /dev/mapper/$DEV_NAME ] && fail +echo $PWD1 | $CRYPTSETUP open $HEADER_KEYU $DEV_NAME 2>/dev/null && fail +[ -b /dev/mapper/$DEV_NAME ] && fail +echo $PWD0 | $CRYPTSETUP open -S1 --test-passphrase $HEADER_KEYU $DEV_NAME 2>/dev/null && fail +$CRYPTSETUP luksKillSlot -q $HEADER_KEYU 0 +$CRYPTSETUP luksDump $HEADER_KEYU | grep -q "0: luks2" && fail +echo $PWD1 | $CRYPTSETUP open -S1 --test-passphrase $HEADER_KEYU || fail +echo $PWD1 | $CRYPTSETUP open --unbound --test-passphrase $HEADER_KEYU || fail +echo $PWD1 | $CRYPTSETUP open -S1 $HEADER_KEYU $DEV_NAME 2>/dev/null && fail + +prepare "[28] Detached LUKS header" wipe +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG || fail +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG --align-payload 1 >/dev/null 2>&1 && fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG --align-payload 8192 || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG --align-payload 4096 >/dev/null || fail +$CRYPTSETUP luksDump $HEADER_IMG | grep -e "0: crypt" -A1 | grep -qe $((4096*512)) || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG --align-payload 0 --sector-size 512 || fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV-missing --header $HEADER_IMG $DEV_NAME 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksOpen $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP -q resize $DEV_NAME --size 100 --header $HEADER_IMG || fail +$CRYPTSETUP -q status $DEV_NAME --header $HEADER_IMG | grep "size:" | grep -q "100 sectors" || fail +$CRYPTSETUP -q status $DEV_NAME | grep "type:" | grep -q "n/a" || fail +$CRYPTSETUP -q status $DEV_NAME | grep "size:" | grep -q "100 sectors" || fail +$CRYPTSETUP luksSuspend $DEV_NAME --header $HEADER_IMG || fail +echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail +$CRYPTSETUP luksSuspend $DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail +$CRYPTSETUP luksClose $DEV_NAME || fail +echo $PWD1 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 5 _fakedev_ --header $HEADER_IMG $KEY5 || fail +$CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "5: luks2" || fail +$CRYPTSETUP luksKillSlot -q _fakedev_ --header $HEADER_IMG 5 || fail +$CRYPTSETUP luksDump _fakedev_ --header $HEADER_IMG | grep -q "5: luks2" && fail +echo $PWD1 | $CRYPTSETUP open --test-passphrase $HEADER_IMG || fail +rm $HEADER_IMG || fail +# create exactly 16 MiBs LUKS2 header +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG --luks2-keyslots-size 16352k --luks2-metadata-size 16k --offset 131072 >/dev/null || fail +SIZE=$(stat --printf=%s $HEADER_IMG) +test $SIZE -eq 16777216 || fail +$CRYPTSETUP -q luksDump $HEADER_IMG | grep -q "offset: $((512 * 131072)) \[bytes\]" || fail + +prepare "[29] Repair metadata" wipe +xz -dk $HEADER_LUKS2_PV.xz +if [ "$HAVE_BLKID" -gt 0 ]; then + $CRYPTSETUP isLuks --disable-locks $HEADER_LUKS2_PV && fail + $CRYPTSETUP isLuks $HEADER_LUKS2_PV && fail + $CRYPTSETUP isLuks --disable-locks --type luks2 $HEADER_LUKS2_PV && fail + $CRYPTSETUP isLuks --type luks2 $HEADER_LUKS2_PV && fail +fi +$CRYPTSETUP -q repair $HEADER_LUKS2_PV || fail +$CRYPTSETUP isLuks $HEADER_LUKS2_PV || fail +$CRYPTSETUP isLuks --type luks2 $HEADER_LUKS2_PV || fail +$CRYPTSETUP isLuks --type luks1 $HEADER_LUKS2_PV && fail + +prepare "[30] LUKS erase" wipe +$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY5 --key-slot 5 || fail +$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || fail +$CRYPTSETUP luksErase -q $LOOPDEV || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" && fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" && fail + +prepare "[31] LUKS convert" wipe +$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks1 $LOOPDEV $KEY5 --key-slot 5 || fail +$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 || fail +$CRYPTSETUP -q luksDump $LOOPDEV --dump-json-metadata >/dev/null 2>&1 && fail +$CRYPTSETUP -q convert --type luks1 $LOOPDEV >/dev/null 2>&1 && fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 1: ENABLED" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 5: ENABLED" || fail +$CRYPTSETUP -q convert --type luks2 $LOOPDEV || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || fail +$CRYPTSETUP -q convert --type luks1 $LOOPDEV || fail +# hash test +$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 --sector-size 512 $LOOPDEV $KEY5 -S 0 --hash sha512 || fail +$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 1 -d $KEY5 $LOOPDEV $KEY1 --hash sha256 || fail +$CRYPTSETUP -q convert --type luks1 $LOOPDEV >/dev/null 2>&1 && fail +$CRYPTSETUP -q luksKillSlot $LOOPDEV 1 || fail +$CRYPTSETUP -q convert --type luks1 $LOOPDEV || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "Key Slot 0: ENABLED" || fail +$CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 0 -d $KEY5 || fail +# sector size test +$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 --sector-size 1024 $LOOPDEV $KEY5 || fail +$CRYPTSETUP -q convert --type luks1 $LOOPDEV >/dev/null 2>&1 && fail + +# create LUKS1 with data offset not aligned to 4KiB +$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks1 $LOOPDEV $KEY5 --align-payload 4097 || fail +$CRYPTSETUP -q convert --type luks2 $LOOPDEV || fail +$CRYPTSETUP isLuks --type luks2 $LOOPDEV || fail +$CRYPTSETUP luksOpen $LOOPDEV --test-passphrase --key-slot 0 -d $KEY5 || fail + +# keyslot 1 area offset is higher than keyslot 0 area +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 --key-slot 0 $LOOPDEV || fail +echo -e "$PWD1\n$PWD2" | $CRYPTSETUP -q luksAddKey $FAST_PBKDF_OPT --key-slot 1 $LOOPDEV || fail +echo -e "$PWD1\n$PWD1" | $CRYPTSETUP -q luksChangeKey $FAST_PBKDF_OPT $LOOPDEV || fail +# convert to LUKS1 and back; LUKS1 does not store length, only offset +$CRYPTSETUP -q convert --type luks1 $LOOPDEV || fail +echo $PWD1 | $CRYPTSETUP -q open --test-passphrase $LOOPDEV || fail +echo $PWD2 | $CRYPTSETUP -q open --test-passphrase $LOOPDEV || fail +$CRYPTSETUP -q convert --type luks2 $LOOPDEV || fail +echo $PWD1 | $CRYPTSETUP -q open --test-passphrase $LOOPDEV || fail +echo $PWD2 | $CRYPTSETUP -q open --test-passphrase $LOOPDEV || fail + +if dm_crypt_keyring_flawed; then + prepare "[32a] LUKS2 keyring dm-crypt bug" wipe + echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG || fail + echo $PWD1 | $CRYPTSETUP open $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail + $CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "dm-crypt" || fail + $CRYPTSETUP close $DEV_NAME || fail + # key must not load in kernel key even when dm-crypt module is missing + if rmmod dm-crypt >/dev/null 2>&1; then + echo $PWD1 | $CRYPTSETUP open $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail + $CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "dm-crypt" || fail + $CRYPTSETUP close $DEV_NAME || fail + fi +fi + +if dm_crypt_keyring_support && dm_crypt_keyring_new_kernel; then + prepare "[32] LUKS2 key in keyring" wipe + echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --header $HEADER_IMG || fail + + # check keyring support detection works as expected + rmmod dm-crypt >/dev/null 2>&1 || true + echo $PWD1 | $CRYPTSETUP open $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail + $CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "keyring" || fail + $CRYPTSETUP close $DEV_NAME || fail + + echo $PWD1 | $CRYPTSETUP open $LOOPDEV --disable-keyring --header $HEADER_IMG $DEV_NAME || fail + $CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "dm-crypt" || fail + $CRYPTSETUP close $DEV_NAME || fail + + echo $PWD1 | $CRYPTSETUP open $LOOPDEV --disable-keyring --header $HEADER_IMG $DEV_NAME || fail + $CRYPTSETUP luksSuspend $DEV_NAME || fail + echo $PWD1 | $CRYPTSETUP luksResume $DEV_NAME --header $HEADER_IMG || fail + $CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "keyring" || fail + $CRYPTSETUP close $DEV_NAME || fail + + echo $PWD1 | $CRYPTSETUP open $LOOPDEV --header $HEADER_IMG $DEV_NAME || fail + $CRYPTSETUP luksSuspend $DEV_NAME || fail + echo $PWD1 | $CRYPTSETUP luksResume --disable-keyring $DEV_NAME --header $HEADER_IMG || fail + $CRYPTSETUP -q status $DEV_NAME | grep "key location:" | grep -q "dm-crypt" || fail + $CRYPTSETUP close $DEV_NAME || fail +fi + +# FIXME: candidate for non-root tests +prepare "[33] tokens" wipe +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail +if [ $HAVE_KEYRING -gt 0 -a -d /proc/sys/kernel/keys ]; then + + test_and_prepare_keyring + + $CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN0 --token-id 3 || fail + $CRYPTSETUP luksDump $LOOPDEV | grep -q -e "3: luks2-keyring" || fail + # keyslot 5 is inactive + $CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN1 --key-slot 5 2> /dev/null && fail + # key description is not reachable + $CRYPTSETUP open --token-only $LOOPDEV --test-passphrase && fail + # wrong passphrase + load_key user $TEST_TOKEN0 "blabla" "$TEST_KEYRING" || fail "Cannot load 32 byte user key type" + $CRYPTSETUP open --token-only $LOOPDEV --test-passphrase 2>/dev/null && fail + load_key user $TEST_TOKEN0 $PWD1 "$TEST_KEYRING" || fail "Cannot load 32 byte user key type" + $CRYPTSETUP open --token-only $LOOPDEV --test-passphrase || fail + $CRYPTSETUP open --token-only $LOOPDEV $DEV_NAME || fail + $CRYPTSETUP status $DEV_NAME > /dev/null || fail + $CRYPTSETUP luksSuspend $DEV_NAME || fail + $CRYPTSETUP luksResume $DEV_NAME <&- || fail + $CRYPTSETUP -q status $DEV_NAME | grep -q "(suspended)" && fail + $CRYPTSETUP luksSuspend $DEV_NAME || fail + $CRYPTSETUP luksResume $DEV_NAME --token-type luks2-keyring <&- || fail + $CRYPTSETUP close $DEV_NAME || fail + + # check --token-type sort of works (TODO: extend tests when native systemd tokens are available) + echo -n "$IMPORT_TOKEN" | $CRYPTSETUP token import $LOOPDEV --token-id 22 || fail + # this excludes keyring tokens from unlocking device + $CRYPTSETUP open --token-only --token-type some_type $LOOPDEV --test-passphrase && fail + $CRYPTSETUP open --token-only --token-type some_type $LOOPDEV $DEV_NAME && fail + $CRYPTSETUP status $DEV_NAME > /dev/null && fail + + $CRYPTSETUP token remove --token-id 3 $LOOPDEV || fail + $CRYPTSETUP luksDump $LOOPDEV | grep -q -e "3: luks2-keyring" && fail + + # test we can remove keyslot with token + echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey -q -S4 $FAST_PBKDF_OPT $LOOPDEV || fail + $CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN1 --key-slot 4 --token-id 0 || fail + $CRYPTSETUP -q luksKillSlot $LOOPDEV 4 || fail + $CRYPTSETUP token remove --token-id 0 $LOOPDEV || fail + + # test we can add unassigned token + $CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN0 --unbound --token-id 0 || fail + $CRYPTSETUP open --token-only --token-id 0 --test-passphrase $LOOPDEV && fail + $CRYPTSETUP token remove --token-id 0 $LOOPDEV || fail + + # test token unassign works + $CRYPTSETUP token add $LOOPDEV --key-description $TEST_TOKEN0 -S0 --token-id 0 || fail + $CRYPTSETUP open --token-only --token-id 0 --test-passphrase $LOOPDEV || fail + $CRYPTSETUP token unassign --token-id 0 $LOOPDEV 2>/dev/null && fail + $CRYPTSETUP token unassign -S0 $LOOPDEV 2>/dev/null && fail + $CRYPTSETUP token unassign --token-id 0 -S0 $LOOPDEV || fail + $CRYPTSETUP open --token-only --token-id 0 --test-passphrase $LOOPDEV && fail + $CRYPTSETUP token unassign --token-id 0 -S0 $LOOPDEV 2>/dev/null && fail + $CRYPTSETUP token unassign --token-id 0 -S44 $LOOPDEV 2>/dev/null && fail + $CRYPTSETUP token unassign --token-id 44 -S0 $LOOPDEV 2>/dev/null && fail +fi +echo -n "$IMPORT_TOKEN" | $CRYPTSETUP token import $LOOPDEV --token-id 10 || fail +echo -n "$IMPORT_TOKEN" | $CRYPTSETUP token import $LOOPDEV --token-id 11 --json-file - || fail +echo -n "$IMPORT_TOKEN" > $TOKEN_FILE0 +$CRYPTSETUP token import $LOOPDEV --token-id 12 --json-file $TOKEN_FILE0 || fail +$CRYPTSETUP token import $LOOPDEV --token-id 12 --json-file $TOKEN_FILE0 2>/dev/null && fail +$CRYPTSETUP token export $LOOPDEV --token-id 10 >$TOKEN_FILE1 || fail +diff $TOKEN_FILE0 $TOKEN_FILE1 || fail +$CRYPTSETUP token export $LOOPDEV --token-id 11 >$TOKEN_FILE1 || fail +diff $TOKEN_FILE0 $TOKEN_FILE1 || fail +$CRYPTSETUP token export $LOOPDEV --token-id 12 >$TOKEN_FILE1 || fail +diff $TOKEN_FILE0 $TOKEN_FILE1 || fail +$CRYPTSETUP token export $LOOPDEV --token-id 12 --json-file $TOKEN_FILE1 || fail +diff $TOKEN_FILE0 $TOKEN_FILE1 || fail +$CRYPTSETUP token export $LOOPDEV --token-id 12 > $TOKEN_FILE1 || fail +diff $TOKEN_FILE0 $TOKEN_FILE1 || fail + +prepare "[34] LUKS keyslot priority" wipe +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV -S 1 || fail +echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey -q $LOOPDEV $FAST_PBKDF_OPT -S 5 || fail +$CRYPTSETUP config $LOOPDEV -S 0 --priority prefer && fail +$CRYPTSETUP config $LOOPDEV -S 1 --priority bla >/dev/null 2>&1 && fail +$CRYPTSETUP config $LOOPDEV -S 1 --priority ignore || fail +echo $PWD1 | $CRYPTSETUP open $LOOPDEV --test-passphrase 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP open $LOOPDEV --test-passphrase -S 1 || fail +echo $PWD2 | $CRYPTSETUP open $LOOPDEV --test-passphrase || fail +$CRYPTSETUP config $LOOPDEV -S 1 --priority normal || fail +echo $PWD1 | $CRYPTSETUP open $LOOPDEV --test-passphrase || fail +$CRYPTSETUP config $LOOPDEV -S 1 --priority ignore || fail +echo $PWD1 | $CRYPTSETUP open $LOOPDEV --test-passphrase 2>/dev/null && fail + +prepare "[35] LUKS label and subsystem" wipe +echo $PWD1 | $CRYPTSETUP luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV || fail +$CRYPTSETUP luksDump $LOOPDEV | grep "Subsystem:" | grep -q "(no subsystem)" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep "Label:" | grep -q "(no label)" || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --subsystem SatelliteTwo --label TheLabel || fail +$CRYPTSETUP luksDump $LOOPDEV | grep "Subsystem:" | grep -q "SatelliteTwo" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep "Label:" | grep -q "TheLabel" || fail +$CRYPTSETUP config $LOOPDEV --subsystem SatelliteThree +$CRYPTSETUP luksDump $LOOPDEV | grep "Subsystem:" | grep -q "SatelliteThree" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep "Label:" | grep -q "(no label)" || fail +$CRYPTSETUP config $LOOPDEV --subsystem SatelliteThree --label TheLabel +$CRYPTSETUP luksDump $LOOPDEV | grep "Subsystem:" | grep -q "SatelliteThree" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep "Label:" | grep -q "TheLabel" || fail + +prepare "[36] LUKS PBKDF setting" wipe +echo $PWD1 | $CRYPTSETUP luksFormat --type luks2 --pbkdf bla $LOOPDEV >/dev/null 2>&1 && fail +# Force setting, no benchmark. PBKDF2 has 1000 iterations as a minimum +echo $PWD1 | $CRYPTSETUP luksFormat --type luks2 --pbkdf pbkdf2 --pbkdf-force-iterations 999 $LOOPDEV 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf pbkdf2 --pbkdf-force-iterations 1234 $LOOPDEV || fail +$CRYPTSETUP luksDump $LOOPDEV | grep "Iterations:" | grep -q "1234" || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf argon2id --pbkdf-force-iterations 3 $LOOPDEV 2>/dev/null && fail +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf argon2id --pbkdf-force-iterations 4 --pbkdf-memory 100000 $LOOPDEV || can_fail_fips +$CRYPTSETUP luksDump $LOOPDEV | grep "PBKDF:" | grep -q "argon2id" || can_fail_fips +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf argon2i --pbkdf-force-iterations 4 \ + --pbkdf-memory 1234 --pbkdf-parallel 1 $LOOPDEV || can_fail_fips +$CRYPTSETUP luksDump $LOOPDEV | grep "PBKDF:" | grep -q "argon2i" || can_fail_fips +$CRYPTSETUP luksDump $LOOPDEV | grep "Time cost:" | grep -q "4" || can_fail_fips +$CRYPTSETUP luksDump $LOOPDEV | grep "Memory:" | grep -q "1234" || can_fail_fips +$CRYPTSETUP luksDump $LOOPDEV | grep "Threads:" | grep -q "1" || can_fail_fips +# Benchmark +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf argon2i -i 500 --pbkdf-memory 1234 --pbkdf-parallel 1 $LOOPDEV || can_fail_fips +[ 0"$($CRYPTSETUP luksDump $LOOPDEV | grep "Time cost:" | cut -d: -f 2 | sed -e 's/\ //g')" -gt 0 ] || can_fail_fips +[ 0"$($CRYPTSETUP luksDump $LOOPDEV | grep "Memory:" | cut -d: -f 2 | sed -e 's/\ //g')" -gt 0 ] || can_fail_fips +echo $PWD1 | $CRYPTSETUP -q luksFormat --type luks2 --pbkdf pbkdf2 -i 500 $LOOPDEV || fail +[ 0"$($CRYPTSETUP luksDump $LOOPDEV | grep -m1 "Iterations:" | cut -d' ' -f 2 | sed -e 's/\ //g')" -gt 1000 ] || fail + +prepare "[37] LUKS Keyslot convert" wipe +$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks1 $LOOPDEV $KEY5 --key-slot 5 || fail +$CRYPTSETUP -q luksConvertKey $LOOPDEV --key-file $KEY5 2>/dev/null && fail +$CRYPTSETUP -q convert --type luks2 $LOOPDEV || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep "PBKDF:" | grep -q "pbkdf2" || fail +$CRYPTSETUP -q luksConvertKey $LOOPDEV -S 5 --key-file $KEY5 --pbkdf argon2i -i1 --pbkdf-memory 32 || can_fail_fips +$CRYPTSETUP luksDump $LOOPDEV | grep -q "5: luks2" || can_fail_fips +echo $PWD1 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV -S 1 --key-file $KEY5 || fail +$CRYPTSETUP -q luksKillSlot $LOOPDEV 5 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep "PBKDF:" | grep -q "pbkdf2" || fail +echo $PWD1 | $CRYPTSETUP -q luksConvertKey $LOOPDEV -S 1 --pbkdf argon2i -i1 --pbkdf-memory 32 || can_fail_fips +$CRYPTSETUP luksDump $LOOPDEV | grep -q "1: luks2" || can_fail_fips +echo $PWD3 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S 21 --unbound -s 72 $LOOPDEV || fail +echo $PWD3 | $CRYPTSETUP luksConvertKey --pbkdf-force-iterations 1001 --pbkdf pbkdf2 -S 21 $LOOPDEV || fail + +prepare "[38] luksAddKey unbound tests" wipe +$CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV $KEY5 --key-slot 5 || fail +# unbound key may have arbitrary size +echo $PWD1 | $CRYPTSETUP luksAddKey $FAST_PBKDF_OPT --unbound -s 72 $LOOPDEV || fail +echo $PWD2 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT --unbound -s 72 -S 2 $LOOPDEV || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2 (unbound)" || fail +dd if=/dev/urandom of=$KEY_FILE0 bs=64 count=1 > /dev/null 2>&1 || fail +echo $PWD3 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT --unbound -s 512 -S 3 --volume-key-file $KEY_FILE0 $LOOPDEV || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2 (unbound)" || fail +# unbound key size is required +echo $PWD1 | $CRYPTSETUP -q luksAddKey --unbound $LOOPDEV 2>/dev/null && fail +echo $PWD3 | $CRYPTSETUP -q luksAddKey --unbound --volume-key-file /dev/urandom $LOOPDEV 2> /dev/null && fail +# do not allow one to replace keyslot by unbound slot +echo $PWD1 | $CRYPTSETUP -q luksAddKey -S5 --unbound -s 32 $LOOPDEV 2>/dev/null && fail +echo $PWD2 | $CRYPTSETUP -q open $LOOPDEV $DEV_NAME 2> /dev/null && fail +echo $PWD2 | $CRYPTSETUP -q open -S2 $LOOPDEV $DEV_NAME 2> /dev/null && fail +echo $PWD2 | $CRYPTSETUP -q open -S2 $LOOPDEV --test-passphrase || fail +echo $PWD1 | $CRYPTSETUP -q open $LOOPDEV $DEV_NAME 2> /dev/null && fail +# check we're able to change passphrase for unbound keyslot +echo -e "$PWD2\n$PWD3" | $CRYPTSETUP luksChangeKey $FAST_PBKDF_OPT -S 2 $LOOPDEV || fail +echo $PWD3 | $CRYPTSETUP open --test-passphrase -S 2 $LOOPDEV || fail +echo $PWD3 | $CRYPTSETUP -q open -S 2 $LOOPDEV $DEV_NAME 2> /dev/null && fail +# do not allow adding keyslot by unbound keyslot +echo -e "$PWD3\n$PWD1" | $CRYPTSETUP -q luksAddKey $LOOPDEV 2> /dev/null && fail +# check adding keyslot works when there's unbound keyslot +echo $PWD1 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT $LOOPDEV --key-file $KEY5 -S8 || fail +echo $PWD1 | $CRYPTSETUP open $LOOPDEV $DEV_NAME || fail +$CRYPTSETUP close $DEV_NAME || fail +$CRYPTSETUP luksKillSlot -q $LOOPDEV 2 +$CRYPTSETUP luksDump $LOOPDEV | grep -q "2: luks2 (unbound)" && fail +echo $PWD3 | $CRYPTSETUP luksDump --unbound --volume-key-file $KEY_FILE1 $LOOPDEV 2> /dev/null && fail +echo $PWD3 | $CRYPTSETUP luksDump --unbound 2> /dev/null $LOOPDEV 2> /dev/null && fail +echo $PWD3 | $CRYPTSETUP luksDump --unbound --volume-key-file $KEY_FILE1 -S3 $LOOPDEV > /dev/null || fail +diff $KEY_FILE0 $KEY_FILE1 || fail +echo $PWD3 | $CRYPTSETUP luksDump --unbound --volume-key-file $KEY_FILE1 -S3 $LOOPDEV 2> /dev/null && fail +diff $KEY_FILE0 $KEY_FILE1 || fail +rm $KEY_FILE1 || fail +echo $PWD3 | $CRYPTSETUP luksDump --unbound --volume-key-file $KEY_FILE1 -S3 $LOOPDEV | grep -q "Unbound Key:" && fail +echo $PWD3 | $CRYPTSETUP luksDump --unbound -S3 $LOOPDEV | grep -q "Unbound Key:" || fail +$CRYPTSETUP luksKillSlot -q $LOOPDEV 3 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep -q "3: luks2 (unbound)" && fail + +prepare "[39] LUKS2 metadata variants" wipe +tar xJf luks2_mda_images.tar.xz +echo -n "$IMPORT_TOKEN" > $TOKEN_FILE0 +for mda in 16 32 64 128 256 512 1024 2048 4096 ; do + echo -n "[$mda KiB]" + echo $PWD4 | $CRYPTSETUP open test_image_$mda $DEV_NAME || fail + $CRYPTSETUP close $DEV_NAME || fail + echo -e "$PWD4\n$PWD3" | $CRYPTSETUP luksAddKey -q -S9 $FAST_PBKDF_OPT test_image_$mda || fail + echo $PWD4 | $CRYPTSETUP open --test-passphrase test_image_$mda || fail + echo $PWD3 | $CRYPTSETUP open -S9 --test-passphrase test_image_$mda || fail + echo -n "$IMPORT_TOKEN" | $CRYPTSETUP token import test_image_$mda --token-id 10 || fail + $CRYPTSETUP token export test_image_$mda --token-id 10 >$TOKEN_FILE1 || fail + diff $TOKEN_FILE1 $TOKEN_FILE0 || fail + echo -n "[OK]" +done +echo + +prepare "[40] LUKS2 metadata areas" wipe +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV 2> /dev/null || fail +DEFAULT_OFFSET=$($CRYPTSETUP luksDump $LOOPDEV | grep "offset: " | cut -f 2 -d ' ') +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks1 $LOOPDEV --key-size 256 --luks2-metadata-size=128k --luks2-keyslots-size=128k 2> /dev/null && fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-metadata-size=128k --luks2-keyslots-size=127k 2> /dev/null && fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-metadata-size=127k --luks2-keyslots-size=128k 2> /dev/null && fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-metadata-size=128k --luks2-keyslots-size=128M >/dev/null 2>&1 && fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-metadata-size=128k --luks2-keyslots-size=128k >/dev/null || fail +$CRYPTSETUP luksDump $LOOPDEV | grep "Metadata area:" | grep -q "131072 \[bytes\]" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep "Keyslots area:" | grep -q "131072 \[bytes\]" || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-metadata-size=128k || fail +$CRYPTSETUP luksDump $LOOPDEV | grep "Metadata area:" | grep -q "131072 \[bytes\]" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep "Keyslots area:" | grep -q "$((DEFAULT_OFFSET-2*131072)) \[bytes\]" || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --luks2-keyslots-size=128k >/dev/null || fail +$CRYPTSETUP luksDump $LOOPDEV | grep "Metadata area:" | grep -q "16384 \[bytes\]" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep "Keyslots area:" | grep -q "131072 \[bytes\]" || fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --offset 16384 || fail +$CRYPTSETUP luksDump $LOOPDEV | grep "Metadata area:" | grep -q "16384 \[bytes\]" || fail +$CRYPTSETUP luksDump $LOOPDEV | grep "Keyslots area:" | grep -q "8355840 \[bytes\]" || fail +# data offset vs area size +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --offset 64 --luks2-keyslots-size=8192 >/dev/null 2>&1 && fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --offset $((256+56)) >/dev/null 2>&1 && fail +echo $PWD1 | $CRYPTSETUP -q luksFormat $FAST_PBKDF_OPT --type luks2 $LOOPDEV --key-size 256 --offset $((256+64)) >/dev/null || fail + +prepare "[41] Per-keyslot encryption parameters" wipe +KEYSLOT_CIPHER="aes-cbc-plain64" +$CRYPTSETUP -q luksFormat --type luks2 $LOOPDEV $KEY1 $FAST_PBKDF_OPT --key-slot 0 --keyslot-cipher $KEYSLOT_CIPHER --keyslot-key-size 128 || fail +[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "0: luks2" | grep "Cipher:" | sed -e 's/[[:space:]]\+Cipher:\ \+//g')" = $KEYSLOT_CIPHER ] || fail +[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "0: luks2" | grep "Cipher key:"| sed -e 's/[[:space:]]\+Cipher\ key:\ \+//g')" = "128 bits" ] || fail +$CRYPTSETUP luksAddKey -q $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT --key-slot 1 --keyslot-cipher $KEYSLOT_CIPHER --keyslot-key-size 128 || fail +[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "1: luks2" | grep "Cipher:" | sed -e 's/[[:space:]]\+Cipher:\ \+//g')" = $KEYSLOT_CIPHER ] || fail +[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "1: luks2" | grep "Cipher key:"| sed -e 's/[[:space:]]\+Cipher\ key:\ \+//g')" = "128 bits" ] || fail +$CRYPTSETUP luksAddKey -q $LOOPDEV -d $KEY1 $KEY2 $FAST_PBKDF_OPT --key-slot 2 || fail +$CRYPTSETUP luksChangeKey $LOOPDEV $FAST_PBKDF_OPT -d $KEY2 $KEY1 --key-slot 2 --keyslot-cipher $KEYSLOT_CIPHER --keyslot-key-size 128 || fail +[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "2: luks2" | grep "Cipher:" | sed -e 's/[[:space:]]\+Cipher:\ \+//g')" = $KEYSLOT_CIPHER ] || fail +[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "2: luks2" | grep "Cipher key:"| sed -e 's/[[:space:]]\+Cipher\ key:\ \+//g')" = "128 bits" ] || fail +# unbound keyslot +echo $PWD3 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT --key-slot 21 --unbound -s 72 --keyslot-cipher $KEYSLOT_CIPHER --keyslot-key-size 128 $LOOPDEV || fail +[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "21: luks2" | grep "Cipher:" | sed -e 's/[[:space:]]\+Cipher:\ \+//g')" = $KEYSLOT_CIPHER ] || fail +[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "21: luks2" | grep "Cipher key:"| sed -e 's/[[:space:]]\+Cipher\ key:\ \+//g')" = "128 bits" ] || fail +echo $PWD3 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT --key-slot 22 --unbound -s 72 $LOOPDEV || fail +echo $PWD3 | $CRYPTSETUP luksConvertKey --key-slot 22 $LOOPDEV --keyslot-cipher $KEYSLOT_CIPHER --keyslot-key-size 128 $LOOPDEV || fail +[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "22: luks2" | grep "Cipher:" | sed -e 's/[[:space:]]\+Cipher:\ \+//g')" = $KEYSLOT_CIPHER ] || fail +[ "$($CRYPTSETUP luksDump $IMG | grep -A8 -m1 "22: luks2" | grep "Cipher key:"| sed -e 's/[[:space:]]\+Cipher\ key:\ \+//g')" = "128 bits" ] || fail + +prepare "[42] Some encryption compatibility mode tests" wipe +CIPHERS="aes-ecb aes-cbc-null aes-cbc-plain64 aes-cbc-essiv:sha256 aes-xts-plain64" +key_size=256 +for cipher in $CIPHERS ; do + echo -n "[$cipher/$key_size]" + $CRYPTSETUP -q luksFormat --type luks2 $LOOPDEV $KEY1 $FAST_PBKDF_OPT --cipher $cipher --key-size $key_size || fail +done +echo + +prepare "[43] New luksAddKey options." wipe +rm -f $VK_FILE +echo "$PWD1" | $CRYPTSETUP luksFormat --type luks2 $FAST_PBKDF_OPT $IMG || fail +echo $PWD1 | $CRYPTSETUP luksDump -q $IMG --dump-volume-key --volume-key-file $VK_FILE >/dev/null || fail + +# pass pass +echo -e "$PWD1\n$PWD2" | $CRYPTSETUP luksAddKey -q -S1 $FAST_PBKDF_OPT $IMG || fail +echo $PWD2 | $CRYPTSETUP open -q --test-passphrase -S1 $IMG || fail + +# pass file +echo "$PWD2" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S1 --new-key-slot 2 $IMG $KEY1 || fail +$CRYPTSETUP open --test-passphrase -q -S2 -d $KEY1 $IMG || fail + +# file pass +echo "$PWD3" | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S2 -d $KEY1 --new-key-slot 3 $IMG || fail +echo $PWD3 | $CRYPTSETUP open -q --test-passphrase -S3 $IMG || fail + +# file file +$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S2 --new-key-slot 4 -d $KEY1 --new-keyfile $KEY2 $IMG || fail +$CRYPTSETUP open --test-passphrase -q -S4 -d $KEY2 $IMG || fail + +# vk pass +echo $PWD4 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S5 --volume-key-file $VK_FILE $IMG || fail +echo $PWD4 | $CRYPTSETUP open -q --test-passphrase -S5 $IMG || fail + +# vk file +$CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S6 --volume-key-file $VK_FILE --new-keyfile $KEY5 $IMG || fail +$CRYPTSETUP open --test-passphrase -q -S6 -d $KEY5 $IMG || fail + +if [ $HAVE_KEYRING -gt 0 -a -d /proc/sys/kernel/keys ]; then + test_and_prepare_keyring + load_key user $TEST_TOKEN0 $PWD1 "$TEST_KEYRING" || fail "Cannot load 32 byte user key type" + load_key user $TEST_TOKEN1 $PWDW "$TEST_KEYRING" || fail "Cannot load 32 byte user key type" + $CRYPTSETUP token add $IMG --key-description $TEST_TOKEN0 --token-id 0 -S0 || fail + $CRYPTSETUP token add $IMG --key-description $TEST_TOKEN1 --token-id 1 --unbound || fail + + # pass token + echo -e "$PWD1" | $CRYPTSETUP luksAddKey -q -S7 --new-token-id 1 $FAST_PBKDF_OPT $IMG || fail + $CRYPTSETUP open -q --test-passphrase --token-only --token-id 1 -q $IMG || fail + echo $PWD1 | $CRYPTSETUP luksKillSlot $IMG 7 || fail + $CRYPTSETUP open -q --test-passphrase --token-only --token-id 1 -q $IMG && fail + + # file token + $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S2 --new-key-slot 7 --new-token-id 1 -d $KEY1 $IMG || fail + $CRYPTSETUP open -q --test-passphrase --token-only --token-id 1 -q $IMG || fail + echo $PWD1 | $CRYPTSETUP luksKillSlot $IMG 7 || fail + $CRYPTSETUP open -q --test-passphrase --token-only --token-id 1 -q $IMG && fail + + # vk token + $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S7 --volume-key-file $VK_FILE --new-token-id 1 $IMG || fail + $CRYPTSETUP open -q --test-passphrase --token-only --token-id 1 -q $IMG || fail + echo $PWD1 | $CRYPTSETUP luksKillSlot $IMG 7 || fail + $CRYPTSETUP open -q --test-passphrase --token-only --token-id 1 -q $IMG && fail + + # token pass + echo $PWD4 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S7 --token-id 0 $IMG || fail + echo $PWD4 | $CRYPTSETUP open -q --test-passphrase -S7 $IMG || fail + + # token file + echo $PWD4 | $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S8 --token-id 0 $IMG $KEY2 || fail + $CRYPTSETUP open -q --test-passphrase -S8 --key-file $KEY2 $IMG || fail + + # token token + $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S9 --token-id 0 --new-token-id 1 $IMG || fail + $CRYPTSETUP open -q --test-passphrase --token-only --token-id 1 -q $IMG || fail + echo $PWD1 | $CRYPTSETUP luksKillSlot $IMG 9 || fail + $CRYPTSETUP open -q --test-passphrase --token-only --token-id 1 -q $IMG && fail + + # reuse same token + $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT -S0 --new-key-slot 9 --token-id 0 --new-token-id 0 $IMG || fail + $CRYPTSETUP open -q --test-passphrase --token-only --token-id 0 -q $IMG || fail + echo $PWD1 | $CRYPTSETUP luksKillSlot $IMG 9 || fail + + # reuse same token + $CRYPTSETUP luksAddKey -q $FAST_PBKDF_OPT --token-id 0 --new-token-id 0 $IMG || fail + echo $PWD1 | $CRYPTSETUP luksKillSlot $IMG 9 || fail + $CRYPTSETUP open -q --test-passphrase --token-only --token-id 0 -q $IMG || fail +fi + +remove_mapping +exit 0 |