Adding debian version 4.96-15+deb12u4.debian/4.96-15+deb12u4debian

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 278 insertions, 0 deletions

diff --git a/debian/EDITME.exim4-light.diff b/debian/EDITME.exim4-light.diff
new file mode 100644
index 0000000..463e541
--- /dev/null
+++ b/debian/EDITME.exim4-light.diff
@@ -0,0 +1,278 @@
+--- src/EDITME	2022-04-24 16:09:23.000000000 +0000
++++ EDITME.exim4-light	2022-04-24 16:10:21.182203632 +0000
+@@ -99,7 +99,7 @@
+ # /usr/local/sbin. The installation script will try to create this directory,
+ # and any superior directories, if they do not exist.
+ 
+-BIN_DIRECTORY=/usr/exim/bin
++BIN_DIRECTORY=/usr/sbin
+ 
+ 
+ #------------------------------------------------------------------------------
+@@ -115,7 +115,7 @@
+ # don't exist. It will also install a default runtime configuration if this
+ # file does not exist.
+ 
+-CONFIGURE_FILE=/usr/exim/configure
++CONFIGURE_FILE=/etc/exim4/exim4.conf:/var/lib/exim4/config.autogenerated
+ 
+ # It is possible to specify a colon-separated list of files for CONFIGURE_FILE.
+ # In this case, Exim will use the first of them that exists when it is run.
+@@ -132,7 +132,7 @@
+ # deliveries. (Local deliveries run as various non-root users, typically as the
+ # owner of a local mailbox.) Specifying these values as root is not supported.
+ 
+-EXIM_USER=
++EXIM_USER=ref:Debian-exim
+ 
+ # If you specify EXIM_USER as a name, this is looked up at build time, and the
+ # uid number is built into the binary. However, you can specify that this
+@@ -154,6 +154,7 @@
+ # you want to use a group other than the default group for the given user.
+ 
+ # EXIM_GROUP=
++EXIM_GROUP=ref:Debian-exim
+ 
+ # Many sites define a user called "exim", with an appropriate default group,
+ # and use
+@@ -174,7 +175,7 @@
+ 
+ # Almost all installations choose this:
+ 
+-SPOOL_DIRECTORY=/var/spool/exim
++SPOOL_DIRECTORY=/var/spool/exim4
+ 
+ 
+ 
+@@ -218,13 +219,13 @@
+ # TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
+ 
+ # Uncomment this if you are using GnuTLS
+-# USE_GNUTLS=yes
++USE_GNUTLS=yes
+ # Uncomment one of these settings if you are using GnuTLS; pkg-config vs not
+ # and an optional location. If you disable SUPPORT_DANE below, you
+ # can remove the gnutls-dane references here.  Earlier versions of GnuTLS
+ # required libtasn1 and libgrypt also; add if needed.
+ # USE_GNUTLS_PC=gnutls gnutls-dane
+-# TLS_LIBS=-lgnutls -lgnutls-dane
++TLS_LIBS=-lgnutls -lgnutls-dane
+ # TLS_LIBS=-L/usr/local/gnu/lib -lgnutls -ltasn1 -lgcrypt -lgnutls-dane
+ 
+ # If using GnuTLS older than 2.10 and using pkg-config then note that Exim's
+@@ -340,7 +341,7 @@
+ # This one is special-purpose, and commonly not required, so it is not
+ # included by default.
+ 
+-# TRANSPORT_LMTP=yes
++TRANSPORT_LMTP=yes
+ 
+ 
+ #------------------------------------------------------------------------------
+@@ -349,8 +350,8 @@
+ # MBX, is included only when requested. If you do not know what this is about,
+ # leave these settings commented out.
+ 
+-# SUPPORT_MAILDIR=yes
+-# SUPPORT_MAILSTORE=yes
++SUPPORT_MAILDIR=yes
++SUPPORT_MAILSTORE=yes
+ # SUPPORT_MBX=yes
+ 
+ 
+@@ -409,8 +410,8 @@
+ LOOKUP_LSEARCH=yes
+ LOOKUP_DNSDB=yes
+ 
+-# LOOKUP_CDB=yes
+-# LOOKUP_DSEARCH=yes
++LOOKUP_CDB=yes
++LOOKUP_DSEARCH=yes
+ # LOOKUP_IBASE=yes
+ # LOOKUP_JSON=yes
+ # LOOKUP_LDAP=yes
+@@ -418,10 +419,10 @@
+ 
+ # LOOKUP_MYSQL=yes
+ # LOOKUP_MYSQL_PC=mariadb
+-# LOOKUP_NIS=yes
++LOOKUP_NIS=yes
+ # LOOKUP_NISPLUS=yes
+ # LOOKUP_ORACLE=yes
+-# LOOKUP_PASSWD=yes
++LOOKUP_PASSWD=yes
+ # LOOKUP_PGSQL=yes
+ # LOOKUP_REDIS=yes
+ # LOOKUP_SQLITE=yes
+@@ -437,7 +438,7 @@
+ 
+ 
+ # Some platforms may need this for LOOKUP_NIS:
+-# LIBS += -lnsl
++LIBS += -lnsl
+ 
+ #------------------------------------------------------------------------------
+ # If you have set LOOKUP_LDAP=yes, you should set LDAP_LIB_TYPE to indicate
+@@ -511,7 +512,7 @@
+ # files are defaulted in the OS/Makefile-Default file, but can be overridden in
+ # local OS-specific make files.
+ 
+-# EXIM_MONITOR=eximon.bin
++EXIM_MONITOR=eximon.bin
+ 
+ 
+ #------------------------------------------------------------------------------
+@@ -586,7 +587,7 @@
+ 
+ # Uncomment the following lines to add SRS (Sender Rewriting Scheme) support
+ # using only native facilities.
+-# SUPPORT_SRS=yes
++SUPPORT_SRS=yes
+ 
+ 
+ #------------------------------------------------------------------------------
+@@ -709,7 +710,7 @@
+ # CONFIGURE_OWNER setting, to specify a configuration file which is listed in
+ # the TRUSTED_CONFIG_LIST file, then root privileges are not dropped by Exim.
+ 
+-# TRUSTED_CONFIG_LIST=/usr/exim/trusted_configs
++TRUSTED_CONFIG_LIST=/etc/exim4/trusted_configs
+ 
+ 
+ #------------------------------------------------------------------------------
+@@ -745,6 +746,9 @@
+ 
+ # WHITELIST_D_MACROS=TLS:SPOOL
+ 
++# Mailscanner uses -DOUTGOING.
++WHITELIST_D_MACROS=OUTGOING
++
+ #------------------------------------------------------------------------------
+ # Exim has support for the AUTH (authentication) extension of the SMTP
+ # protocol, as defined by RFC 2554. If you don't know what SMTP authentication
+@@ -754,16 +758,16 @@
+ # included in the Exim binary. You will then need to set up the run time
+ # configuration to make use of the mechanism(s) selected.
+ 
+-# AUTH_CRAM_MD5=yes
++AUTH_CRAM_MD5=yes
+ # AUTH_CYRUS_SASL=yes
+ # AUTH_DOVECOT=yes
+-# AUTH_EXTERNAL=yes
++AUTH_EXTERNAL=yes
+ # AUTH_GSASL=yes
+ # AUTH_GSASL_PC=libgsasl
+ # AUTH_HEIMDAL_GSSAPI=yes
+ # AUTH_HEIMDAL_GSSAPI_PC=heimdal-gssapi
+ # AUTH_HEIMDAL_GSSAPI_PC=heimdal-gssapi heimdal-krb5
+-# AUTH_PLAINTEXT=yes
++AUTH_PLAINTEXT=yes
+ # AUTH_SPA=yes
+ # AUTH_TLS=yes
+ 
+@@ -792,7 +796,7 @@
+ # one that is set in the headers_charset option. The default setting is
+ # defined by this setting:
+ 
+-HEADERS_CHARSET="ISO-8859-1"
++HEADERS_CHARSET="UTF-8"
+ 
+ # If you are going to make use of $header_xxx expansions in your configuration
+ # file, or if your users are going to use them in filter files, and the normal
+@@ -879,6 +883,7 @@
+ # description of the API to this function, see the Exim specification.
+ 
+ DLOPEN_LOCAL_SCAN=yes
++HAVE_LOCAL_SCAN=yes
+ 
+ # If you set DLOPEN_LOCAL_SCAN, then you need to include -rdynamic in the
+ # linker flags.  Without it, the loaded .so won't be able to access any
+@@ -917,6 +922,7 @@
+ # to form the final file names. Some installations may want something like this:
+ 
+ # LOG_FILE_PATH=/var/log/exim_%slog
++LOG_FILE_PATH=/var/log/exim4/%slog
+ 
+ # which results in files with names /var/log/exim_mainlog, etc. The directory
+ # in which the log files are placed must exist; Exim does not try to create
+@@ -965,7 +971,7 @@
+ # files. Both the name of the command and the suffix that it adds to files
+ # need to be defined here. See also the EXICYCLOG_MAX configuration.
+ 
+-COMPRESS_COMMAND=/usr/bin/gzip
++COMPRESS_COMMAND=/bin/gzip
+ COMPRESS_SUFFIX=gz
+ 
+ 
+@@ -980,7 +986,7 @@
+ # ZCAT_COMMAND=zcat
+ #
+ # Or specify the full pathname:
+-ZCAT_COMMAND=/usr/bin/zcat
++ZCAT_COMMAND=zcat
+ 
+ #------------------------------------------------------------------------------
+ # Compiling in support for embedded Perl: If you want to be able to
+@@ -1012,6 +1018,7 @@
+ 
+ # You probably need to add -lpam to EXTRALIBS, and in some releases of
+ # GNU/Linux -ldl is also needed.
++EXTRALIBS=-ldl
+ 
+ 
+ #------------------------------------------------------------------------------
+@@ -1020,7 +1027,7 @@
+ # If you may want to use outbound (client-side) proxying, using Socks5,
+ # uncomment the line below.
+ 
+-# SUPPORT_SOCKS=yes
++SUPPORT_SOCKS=yes
+ 
+ # If you may want to use inbound (server-side) proxying, using Proxy Protocol,
+ # uncomment the line below.
+@@ -1038,10 +1045,10 @@
+ # If you want IDNA2008 mappings per RFCs 5890, 6530 and 6533, you additionally
+ # need libidn2 and SUPPORT_I18N_2008.
+ 
+-# SUPPORT_I18N=yes
++SUPPORT_I18N=yes
+ # LDFLAGS += -lidn
+-# SUPPORT_I18N_2008=yes
+-# LDFLAGS += -lidn -lidn2
++SUPPORT_I18N_2008=yes
++LDFLAGS += -lidn -lidn2
+ 
+ 
+ #------------------------------------------------------------------------------
+@@ -1118,6 +1125,8 @@
+ 
+ # CYRUS_SASLAUTHD_SOCKET=/var/state/saslauthd/mux
+ 
++# default in Debian's sasl2-bin
++CYRUS_SASLAUTHD_SOCKET=/var/run/saslauthd/mux
+ 
+ #------------------------------------------------------------------------------
+ # TCP wrappers: If you want to use tcpwrappers from within Exim, uncomment
+@@ -1430,6 +1439,7 @@
+ # file can be specified here. Some installations may want something like this:
+ 
+ # PID_FILE_PATH=/var/lock/exim.pid
++PID_FILE_PATH=/run/exim4/exim.pid
+ 
+ # If PID_FILE_PATH is not defined, Exim writes a file in its spool directory
+ # using the name "exim-daemon.pid".
+@@ -1463,6 +1473,7 @@
+ # messages become "invisible" to the normal management tools.
+ 
+ # SUPPORT_MOVE_FROZEN_MESSAGES=yes
++SUPPORT_MOVE_FROZEN_MESSAGES=yes
+ 
+ 
+ #------------------------------------------------------------------------------
+@@ -1510,3 +1521,6 @@
+ # DISABLE_CLIENT_CMD_LOG=yes
+ 
+ # End of EDITME for Exim 4.
++
++# enable IPv6 support
++HAVE_IPV6=YES