diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 16:16:13 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 16:16:13 +0000 |
commit | e90fcc54809db2591dc083f43ef54c6ec8c60847 (patch) | |
tree | f20bc206c3c2d5d59d37c46c5cf5d53a20642556 /doc/experimental-spec.txt | |
parent | Initial commit. (diff) | |
download | exim4-e90fcc54809db2591dc083f43ef54c6ec8c60847.tar.xz exim4-e90fcc54809db2591dc083f43ef54c6ec8c60847.zip |
Adding upstream version 4.96.upstream/4.96upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | doc/experimental-spec.txt | 665 |
1 files changed, 665 insertions, 0 deletions
diff --git a/doc/experimental-spec.txt b/doc/experimental-spec.txt new file mode 100644 index 0000000..dbd57d6 --- /dev/null +++ b/doc/experimental-spec.txt @@ -0,0 +1,665 @@ +From time to time, experimental features may be added to Exim. +While a feature is experimental, there will be a build-time +option whose name starts "EXPERIMENTAL_" that must be set in +order to include the feature. This file contains information +about experimental features, all of which are unstable and +liable to incompatible change. + + +Brightmail AntiSpam (BMI) support +-------------------------------------------------------------- + +Brightmail AntiSpam is a commercial package. Please see +http://www.brightmail.com for more information on +the product. For the sake of clarity, we'll refer to it as +"BMI" from now on. + + +0) BMI concept and implementation overview + +In contrast to how spam-scanning with SpamAssassin is +implemented in exiscan-acl, BMI is more suited for per +-recipient scanning of messages. However, each messages is +scanned only once, but multiple "verdicts" for multiple +recipients can be returned from the BMI server. The exiscan +implementation passes the message to the BMI server just +before accepting it. It then adds the retrieved verdicts to +the messages header file in the spool. These verdicts can then +be queried in routers, where operation is per-recipient +instead of per-message. To use BMI, you need to take the +following steps: + + 1) Compile Exim with BMI support + 2) Set up main BMI options (top section of Exim config file) + 3) Set up ACL control statement (ACL section of the config + file) + 4) Set up your routers to use BMI verdicts (routers section + of the config file). + 5) (Optional) Set up per-recipient opt-in information. + +These four steps are explained in more details below. + +1) Adding support for BMI at compile time + + To compile with BMI support, you need to link Exim against + the Brightmail client SDK, consisting of a library + (libbmiclient_single.so) and a header file (bmi_api.h). + You'll also need to explicitly set a flag in the Makefile to + include BMI support in the Exim binary. Both can be achieved + with these lines in Local/Makefile: + + EXPERIMENTAL_BRIGHTMAIL=yes + CFLAGS=-I/path/to/the/dir/with/the/includefile + EXTRALIBS_EXIM=-L/path/to/the/dir/with/the/library -lbmiclient_single + + If you use other CFLAGS or EXTRALIBS_EXIM settings then + merge the content of these lines with them. + + Note for BMI6.x users: You'll also have to add -lxml2_single + to the EXTRALIBS_EXIM line. Users of 5.5x do not need to do + this. + + You should also include the location of + libbmiclient_single.so in your dynamic linker configuration + file (usually /etc/ld.so.conf) and run "ldconfig" + afterwards, or else the produced Exim binary will not be + able to find the library file. + + +2) Setting up BMI support in the Exim main configuration + + To enable BMI support in the main Exim configuration, you + should set the path to the main BMI configuration file with + the "bmi_config_file" option, like this: + + bmi_config_file = /opt/brightmail/etc/brightmail.cfg + + This must go into section 1 of Exim's configuration file (You + can put it right on top). If you omit this option, it + defaults to /opt/brightmail/etc/brightmail.cfg. + + Note for BMI6.x users: This file is in XML format in V6.xx + and its name is /opt/brightmail/etc/bmiconfig.xml. So BMI + 6.x users MUST set the bmi_config_file option. + + +3) Set up ACL control statement + + To optimize performance, it makes sense only to process + messages coming from remote, untrusted sources with the BMI + server. To set up a messages for processing by the BMI + server, you MUST set the "bmi_run" control statement in any + ACL for an incoming message. You will typically do this in + an "accept" block in the "acl_check_rcpt" ACL. You should + use the "accept" block(s) that accept messages from remote + servers for your own domain(s). Here is an example that uses + the "accept" blocks from Exim's default configuration file: + + + accept domains = +local_domains + endpass + verify = recipient + control = bmi_run + + accept domains = +relay_to_domains + endpass + verify = recipient + control = bmi_run + + If bmi_run is not set in any ACL during reception of the + message, it will NOT be passed to the BMI server. + + +4) Setting up routers to use BMI verdicts + + When a message has been run through the BMI server, one or + more "verdicts" are present. Different recipients can have + different verdicts. Each recipient is treated individually + during routing, so you can query the verdicts by recipient + at that stage. From Exim's view, a verdict can have the + following outcomes: + + o deliver the message normally + o deliver the message to an alternate location + o do not deliver the message + + To query the verdict for a recipient, the implementation + offers the following tools: + + + - Boolean router preconditions. These can be used in any + router. For a simple implementation of BMI, these may be + all that you need. The following preconditions are + available: + + o bmi_deliver_default + + This precondition is TRUE if the verdict for the + recipient is to deliver the message normally. If the + message has not been processed by the BMI server, this + variable defaults to TRUE. + + o bmi_deliver_alternate + + This precondition is TRUE if the verdict for the + recipient is to deliver the message to an alternate + location. You can get the location string from the + $bmi_alt_location expansion variable if you need it. See + further below. If the message has not been processed by + the BMI server, this variable defaults to FALSE. + + o bmi_dont_deliver + + This precondition is TRUE if the verdict for the + recipient is NOT to deliver the message to the + recipient. You will typically use this precondition in a + top-level blackhole router, like this: + + # don't deliver messages handled by the BMI server + bmi_blackhole: + driver = redirect + bmi_dont_deliver + data = :blackhole: + + This router should be on top of all others, so messages + that should not be delivered do not reach other routers + at all. If the message has not been processed by + the BMI server, this variable defaults to FALSE. + + + - A list router precondition to query if rules "fired" on + the message for the recipient. Its name is "bmi_rule". You + use it by passing it a colon-separated list of rule + numbers. You can use this condition to route messages that + matched specific rules. Here is an example: + + # special router for BMI rule #5, #8 and #11 + bmi_rule_redirect: + driver = redirect + bmi_rule = 5:8:11 + data = postmaster@mydomain.com + + + - Expansion variables. Several expansion variables are set + during routing. You can use them in custom router + conditions, for example. The following variables are + available: + + o $bmi_base64_verdict + + This variable will contain the BASE64 encoded verdict + for the recipient being routed. You can use it to add a + header to messages for tracking purposes, for example: + + localuser: + driver = accept + check_local_user + headers_add = X-Brightmail-Verdict: $bmi_base64_verdict + transport = local_delivery + + If there is no verdict available for the recipient being + routed, this variable contains the empty string. + + o $bmi_base64_tracker_verdict + + This variable will contain a BASE64 encoded subset of + the verdict information concerning the "rules" that + fired on the message. You can add this string to a + header, commonly named "X-Brightmail-Tracker". Example: + + localuser: + driver = accept + check_local_user + headers_add = X-Brightmail-Tracker: $bmi_base64_tracker_verdict + transport = local_delivery + + If there is no verdict available for the recipient being + routed, this variable contains the empty string. + + o $bmi_alt_location + + If the verdict is to redirect the message to an + alternate location, this variable will contain the + alternate location string returned by the BMI server. In + its default configuration, this is a header-like string + that can be added to the message with "headers_add". If + there is no verdict available for the recipient being + routed, or if the message is to be delivered normally, + this variable contains the empty string. + + o $bmi_deliver + + This is an additional integer variable that can be used + to query if the message should be delivered at all. You + should use router preconditions instead if possible. + + $bmi_deliver is '0': the message should NOT be delivered. + $bmi_deliver is '1': the message should be delivered. + + + IMPORTANT NOTE: Verdict inheritance. + The message is passed to the BMI server during message + reception, using the target addresses from the RCPT TO: + commands in the SMTP transaction. If recipients get expanded + or re-written (for example by aliasing), the new address(es) + inherit the verdict from the original address. This means + that verdicts also apply to all "child" addresses generated + from top-level addresses that were sent to the BMI server. + + +5) Using per-recipient opt-in information (Optional) + + The BMI server features multiple scanning "profiles" for + individual recipients. These are usually stored in a LDAP + server and are queried by the BMI server itself. However, + you can also pass opt-in data for each recipient from the + MTA to the BMI server. This is particularly useful if you + already look up recipient data in Exim anyway (which can + also be stored in a SQL database or other source). This + implementation enables you to pass opt-in data to the BMI + server in the RCPT ACL. This works by setting the + 'bmi_optin' modifier in a block of that ACL. If should be + set to a list of comma-separated strings that identify the + features which the BMI server should use for that particular + recipient. Ideally, you would use the 'bmi_optin' modifier + in the same ACL block where you set the 'bmi_run' control + flag. Here is an example that will pull opt-in data for each + recipient from a flat file called + '/etc/exim/bmi_optin_data'. + + The file format: + + user1@mydomain.com: <OPTIN STRING1>:<OPTIN STRING2> + user2@thatdomain.com: <OPTIN STRING3> + + + The example: + + accept domains = +relay_to_domains + endpass + verify = recipient + bmi_optin = ${lookup{$local_part@$domain}lsearch{/etc/exim/bmi_optin_data}} + control = bmi_run + + Of course, you can also use any other lookup method that + Exim supports, including LDAP, Postgres, MySQL, Oracle etc., + as long as the result is a list of colon-separated opt-in + strings. + + For a list of available opt-in strings, please contact your + Brightmail representative. + + + + +DCC Support +-------------------------------------------------------------- +Distributed Checksum Clearinghouse; http://www.rhyolite.com/dcc/ + +*) Building exim + +In order to build exim with DCC support add + +EXPERIMENTAL_DCC=yes + +to your Makefile. (Re-)build/install exim. exim -d should show +EXPERIMENTAL_DCC under "Support for". + + +*) Configuration + +In the main section of exim.cf add at least + dccifd_address = /usr/local/dcc/var/dccifd +or + dccifd_address = <ip> <port> + +In the DATA ACL you can use the new condition + dcc = * + +After that "$dcc_header" contains the X-DCC-Header. + +Return values are: + fail for overall "R", "G" from dccifd + defer for overall "T" from dccifd + accept for overall "A", "S" from dccifd + +dcc = */defer_ok works as for spamd. + +The "$dcc_result" variable contains the overall result from DCC +answer. There will an X-DCC: header added to the mail. + +Usually you'll use + defer !dcc = * +to greylist with DCC. + +If you set, in the main section, + dcc_direct_add_header = true +then the dcc header will be added "in deep" and if the spool +file was already written it gets removed. This forces Exim to +write it again if needed. This helps to get the DCC Header +through to eg. SpamAssassin. + +If you want to pass even more headers in the middle of the +DATA stage you can set + $acl_m_dcc_add_header +to tell the DCC routines to add more information; eg, you might set +this to some results from ClamAV. Be careful. Header syntax is +not checked and is added "as is". + +In case you've troubles with sites sending the same queue items from several +hosts and fail to get through greylisting you can use +$acl_m_dcc_override_client_ip + +Setting $acl_m_dcc_override_client_ip to an IP address overrides the default +of $sender_host_address. eg. use the following ACL in DATA stage: + + warn set acl_m_dcc_override_client_ip = \ + ${lookup{$sender_helo_name}nwildlsearch{/etc/mail/multipleip_sites}{$value}{}} + condition = ${if def:acl_m_dcc_override_client_ip} + log_message = dbg: acl_m_dcc_override_client_ip set to \ + $acl_m_dcc_override_client_ip + +Then set something like +# cat /etc/mail/multipleip_sites +mout-xforward.gmx.net 82.165.159.12 +mout.gmx.net 212.227.15.16 + +Use a reasonable IP. eg. one the sending cluster actually uses. + + + +DSN extra information +--------------------- +If compiled with EXPERIMENTAL_DSN_INFO extra information will be added +to DSN fail messages ("bounces"), when available. The intent is to aid +tracing of specific failing messages, when presented with a "bounce" +complaint and needing to search logs. + + +The remote MTA IP address, with port number if nonstandard. +Example: + Remote-MTA: X-ip; [127.0.0.1]:587 +Rationale: + Several addresses may correspond to the (already available) + dns name for the remote MTA. + +The remote MTA connect-time greeting. +Example: + X-Remote-MTA-smtp-greeting: X-str; 220 the.local.host.name ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000 +Rationale: + This string sometimes presents the remote MTA's idea of its + own name, and sometimes identifies the MTA software. + +The remote MTA response to HELO or EHLO. +Example: + X-Remote-MTA-helo-response: X-str; 250-the.local.host.name Hello localhost [127.0.0.1] +Limitations: + Only the first line of a multiline response is recorded. +Rationale: + This string sometimes presents the remote MTA's view of + the peer IP connecting to it. + +The reporting MTA detailed diagnostic. +Example: + X-Exim-Diagnostic: X-str; SMTP error from remote mail server after RCPT TO:<d3@myhost.test.ex>: 550 hard error +Rationale: + This string sometimes give extra information over the + existing (already available) Diagnostic-Code field. + + +Note that non-RFC-documented field names and data types are used. + + +Queuefile transport +------------------- +Queuefile is a pseudo transport which does not perform final delivery. +It simply copies the exim spool files out of the spool directory into +an external directory retaining the exim spool format. + +The spool files can then be processed by external processes and then +requeued into exim spool directories for final delivery. +However, note carefully the warnings in the main documentation on +qpool file formats. + +The motivation/inspiration for the transport is to allow external +processes to access email queued by exim and have access to all the +information which would not be available if the messages were delivered +to the process in the standard email formats. + +The mailscanner package is one of the processes that can take advantage +of this transport to filter email. + +The transport can be used in the same way as the other existing transports, +i.e by configuring a router to route mail to a transport configured with +the queuefile driver. + +The transport only takes one option: + +* directory - This is used to specify the directory messages should be +copied to. Expanded. + +The generic transport options (body_only, current_directory, disable_logging, +debug_print, delivery_date_add, envelope_to_add, event_action, group, +headers_add, headers_only, headers_remove, headers_rewrite, home_directory, +initgroups, max_parallel, message_size_limit, rcpt_include_affixes, +retry_use_local_part, return_path, return_path_add, shadow_condition, +shadow_transport, transport_filter, transport_filter_timeout, user) are +ignored. + +Sample configuration: + +(Router) + +scan: + driver = accept + transport = scan + +(Transport) + +scan: + driver = queuefile + directory = /var/spool/baruwa-scanner/input + + +In order to build exim with Queuefile transport support add or uncomment + +EXPERIMENTAL_QUEUEFILE=yes + +to your Local/Makefile. (Re-)build/install exim. exim -d should show +Experimental_QUEUEFILE in the line "Support for:". + + +ARC support +----------- +Specification: https://tools.ietf.org/html/draft-ietf-dmarc-arc-protocol-11 +Note that this is not an RFC yet, so may change. + +[RFC 8617 was published 2019/06. Draft 11 was 2018/01. A review of the +changes has not yet been done] + +ARC is intended to support the utility of SPF and DKIM in the presence of +intermediaries in the transmission path - forwarders and mailinglists - +by establishing a cryptographically-signed chain in headers. + +Normally one would only bother doing ARC-signing when functioning as +an intermediary. One might do verify for local destinations. + +ARC uses the notion of a "ADministrative Management Domain" (ADMD). +Described in RFC 5598 (section 2.3), this is essentially a set of +mail-handling systems that mail transits that are all under the control +of one organisation. A label should be chosen to identify the ADMD. +Messages should be ARC-verified on entry to the ADMD, and ARC-signed on exit +from it. + + +Building with ARC Support +-- +Enable using EXPERIMENTAL_ARC=yes in your Local/Makefile. +You must also have DKIM present (not disabled), and you very likely +want to have SPF enabled. + + +Verification +-- +An ACL condition is provided to perform the "verifier actions" detailed +in section 6 of the above specification. It may be called from the DATA ACL +and succeeds if the result matches any of a given list. +It also records the highest ARC instance number (the chain size) +and verification result for later use in creating an Authentication-Results: +standard header. + + verify = arc/<acceptable_list> none:fail:pass + + add_header = :at_start:${authresults {<admd-identifier>}} + + Note that it would be wise to strip incoming messages of A-R headers + that claim to be from our own <admd-identifier>. + +There are four new variables: + + $arc_state One of pass, fail, none + $arc_state_reason (if fail, why) + $arc_domains colon-sep list of ARC chain domains, in chain order. + problematic elements may have empty list elements + $arc_oldest_pass lowest passing instance number of chain + +Example: + logwrite = oldest-p-ams: <${reduce {$lh_ARC-Authentication-Results:} \ + {} \ + {${if = {$arc_oldest_pass} \ + {${extract {i}{${extract {1}{;}{$item}}}}} \ + {$item} {$value}}} \ + }> + +Receive log lines for an ARC pass will be tagged "ARC". + + +Signing +-- +arc_sign = <admd-identifier> : <selector> : <privkey> [ : <options> ] +An option on the smtp transport, which constructs and prepends to the message +an ARC set of headers. The textually-first Authentication-Results: header +is used as a basis (you must have added one on entry to the ADMD). +Expanded as a whole; if unset, empty or forced-failure then no signing is done. +If it is set, all of the first three elements must be non-empty. + +The fourth element is optional, and if present consists of a comma-separated list +of options. The options implemented are + + timestamps Add a t= tag to the generated AMS and AS headers, with the + current time. + expire[=<val>] Add an x= tag to the generated AMS header, with an expiry time. + If the value <val> is an plain number it is used unchanged. + If it starts with a '+' then the following number is added + to the current time, as an offset in seconds. + If a value is not given it defaults to a one month offset. + +[As of writing, gmail insist that a t= tag on the AS is mandatory] + +Caveats: + * There must be an Authentication-Results header, presumably added by an ACL + while receiving the message, for the same ADMD, for arc_sign to succeed. + This requires careful coordination between inbound and outbound logic. + + Only one A-R header is taken account of. This is a limitation versus + the ARC spec (which says that all A-R headers from within the ADMD must + be used). + + * If passing a message to another system, such as a mailing-list manager + (MLM), between receipt and sending, be wary of manipulations to headers made + by the MLM. + + For instance, Mailman with REMOVE_DKIM_HEADERS==3 might improve + deliverability in a pre-ARC world, but that option also renames the + Authentication-Results header, which breaks signing. + + * Even if you use multiple DKIM keys for different domains, the ARC concept + should try to stick to one ADMD, so pick a primary domain and use that for + AR headers and outbound signing. + +Signing is not compatible with cutthrough delivery; any (before expansion) +value set for the option will result in cutthrough delivery not being +used via the transport in question. + + + +Dovecot authenticator via inet socket +-------------------------------------------------------------- +If Dovecot is configured similar to :- + +service auth { +... +#SASL + inet_listener { + name = exim + port = 12345 + } +... +} + +then an Exim authenticator can be configured :- + + dovecot-plain: + driver = dovecot + public_name = PLAIN + server_socket = dovecot_server_name 12345 + server_tls = true + server_set_id = $auth1 + +If the server_socket does not start with a / it is taken as a hostname (or IP); +and a whitespace-separated port number must be given. + + + + +Logging protocol unusual states +--------------------------------------------------------------- +An extra log_selector, "protocol_detail" has been added in the default build. +The name may change in future, hence the Experimenal status. + +Currrently the only effect is to enable logging, under TLS, +of a TCP RST received directly after a QUIT (in server mode). + +Outlook is consistently doing this; not waiting for the SMTP response +to its QUIT, not properly closing the TLS session and not properly closing +the TCP connection. Previously this resulted is an error from SSL_write +being logged. + + + +Limits ESMTP extension +--------------------------------------------------------------- +Per https://datatracker.ietf.org/doc/html/draft-freed-smtp-limits-01 + +If compiled with EXPERIMENTAL_ESMTP_LIMITS=yes :- + +As a server, Exim will advertise, in the EHLO response, the limit for RCPT +commands set by the recipients_max main-section config option (if it is set), +and the limit for MAIL commands set by the smtp_accept_max_per_connection +option. + +Note that as of writing, smtp_accept_max_per_connection is expanded but +recipients_max is not. + +A new main-section option "limits_advertise_hosts" controls whether +the limits are advertised; the default for the option is "*". + +As a client, Exim will: + + - note an advertised MAILMAX; the lower of the value given and the + value from the transport connection_max_messages option is used. + + - note an advertised RCPTMAX; the lower of the + value given and the value from the transport max_rcpt option is used. + Parallisation of transactions is not done if due to a RCPTMAX, unlike + max_rcpt. + + - note an advertised RCPTDOMAINMAX, and behave as if the transport + multi_domains option was set to false. The value advertised is ignored. + +Values advertised are only noted for TLS connections and ones for which +the server does not advertise TLS support. + + +-------------------------------------------------------------- +End of file +-------------------------------------------------------------- |