Adding upstream version 4.96.upstream/4.96upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

24 files changed, 58903 insertions, 0 deletions

diff --git a/doc/ChangeLog b/doc/ChangeLog
new file mode 100644
index 0000000..3e6da91
--- /dev/null
+++ b/doc/ChangeLog
@@ -0,0 +1,8277 @@
+This document describes *changes* to previous versions, that might
+affect Exim's operation, with an unchanged configuration file.  For new
+options, and new features, see the NewStuff file next to this ChangeLog.
+
+Exim version 4.96
+-----------------
+
+JH/01 Move the wait-for-next-tick (needed for unique messmage IDs) from
+      after reception to before a subsequent reception.  This should
+      mean slightly faster delivery, and also confirmation of reception
+      to senders.
+
+JH/02 Move from using the pcre library to pcre2.  The former is no longer
+      being developed or supported (by the original developer).
+
+JH/03 Constification work in the filters module required a major version
+      bump for the local-scan API.  Specifically, the "headers_charset"
+      global which is visible via the API is now const and may therefore
+      not be modified by local-scan code.
+
+JH/04 Fix ClamAV TCP use under FreeBSD. Previously the OS-specific shim for
+      sendfile() didi not account for the way the ClamAV driver code called it.
+
+JH/05 Bug 2819: speed up command-line messages being read in.  Previously a
+      time check was being done for every character; replace that with one
+      per buffer.
+
+JH/06 Bug 2815: Fix ALPN sent by server under OpenSSL.  Previously the string
+      sent was prefixed with a length byte.
+
+JH/07 Change the SMTP feature name for pipelining connect to be compliant with
+      RFC 5321.  Previously Dovecot (at least) would log errors during
+      submission.
+
+JH/08 Remove stripping of the binaries from the FreeBSD build.  This was added
+      in 4.61 without a reason logged. Binaries will be bigger, which might
+      matter on diskspace-constrained systems, but debug is easier.
+
+JH/09 Fix macro-definition during "-be" expansion testing.  The move to
+      write-protected store for macros had not accounted for these runtime
+      additions; fix by removing this protection for "-be" mode.
+
+JH/10 Convert all uses of select() to poll().  FreeBSD 12.2 was found to be
+      handing out large-numbered file descriptors, violating the usual Unix
+      assumption (and required by Posix) that the lowest possible number will be
+      allocated by the kernel when a new one is needed.  In the daemon, and any
+      child procesees, values higher than 1024 (being bigger than FD_SETSIZE)
+      are not useable for FD_SET() [and hence select()] and overwrite the stack.
+      Assorted crashes happen.
+
+JH/11 Fix use of $sender_host_name in daemon process.  When used in certain
+      main-section options or in a connect ACL, the value from the first ever
+      connection was never replaced for subsequent connections.  Found by
+      Wakko Warner.
+
+JH/12 Bug 2838: Fix for i32lp64 hard-align platforms. Found for SPARC Linux,
+      though only once PCRE2 was introduced: the memory accounting used under
+      debug offset allocations by an int, giving a hard trap in early startup.
+      Change to using a size_t.  Debug and fix by John Paul Adrian Glaubitz.
+
+JH/13 Bug 2845: Fix handling of tls_require_ciphers for OpenSSL when a value
+      with underbars is given.  The write-protection of configuration introduced
+      in 4.95 trapped when normalisation was applied to an option not needing
+      expansion action.
+
+JH/14 Bug 1895: TLS: Deprecate RFC 5114 Diffie-Hellman parameters.
+
+JH/15 Fix a resource leak in *BSD.  An off-by-one error resulted in the daemon
+      failing to close the certificates directory, every hour or any time it
+      was touched.
+
+JH/16 Debugging initiated by an ACL control now continues through into routing
+      and transport processes.  Previously debugging stopped any time Exim
+      re-execs, or for processing a queued message.
+
+JH/17 The "expand" debug selector now gives more detail, specifically on the
+      result of expansion operators and items.
+
+JH/18 Bug 2751: Fix include_directory in redirect routers.  Previously a
+      bad comparison between the option value and the name of the file to
+      be included was done, and a mismatch was wrongly identified.
+      4.88 to 4.95 are affected.
+
+JH/19 Support for Berkeley DB versions 1 and 2 is withdrawn.
+
+JH/20 When built with NDBM for hints DB's check for nonexistence of a name
+      supplied as the db file-pair basename.  Previously, if a directory
+      path was given, for example via the autoreply "once" option, the DB
+      file.pag and file.dir files would be created in that directory's
+      parent.
+
+JH/21 Remove the "allow_insecure_tainted_data" main config option and the
+      "taint" log_selector.  These were previously deprecated.
+
+JH/22 Fix static address-list lookups to properly return the matched item.
+      Previously only the domain part was returned.
+
+JH/23 Bug 2864: FreeBSD: fix transport hang after 4xx/5xx response. Previously
+      the call into OpenSSL to send a TLS Close was being repeated; this
+      resulted in the library waiting for the peer's Close.  If that was never
+      sent we waited forever.  Fix by tracking send calls.
+
+JH/24 The ${run} expansion item now expands its command string elements after
+      splitting.  Previously it was before; the new ordering makes handling
+      zero-length arguments simpler.  The old ordering can be obtained by
+      appending a new option "preexpand", after a comma, to the "run".
+
+JH/25 Taint-check exec arguments for transport-initiated external processes.
+      Previously, tainted values could be used.  This affects "pipe", "lmtp" and
+      "queryprogram" transport, transport-filter, and ETRN commands.
+      The ${run} expansion is also affected: in "preexpand" mode no part of
+      the command line may be tainted, in default mode the executable name
+      may not be tainted.
+
+JH/26 Fix CHUNKING on a continued-transport.  Previously the usabliility of
+      the the facility was not passed across execs, and only the first message
+      passed over a connection could use BDAT; any further ones using DATA.
+
+JH/27 Support the PIPECONNECT facility in the smtp transport when the helo_data
+      uses $sending_ip_address and an interface is specified.
+      Previously any use of the local address in the EHLO name disabled
+      PIPECONNECT, the common case being to use the rDNS of it.
+
+JH/28 OpenSSL: fix transport-required OCSP stapling verification under session
+      resumption. Previously verify failed because no certificate status is
+      passed on the wire for the restarted session. Fix by using the recorded
+      ocsp status of the stored session for the new connection.
+
+JH/29 TLS resumption: the key for session lookup in the client now includes
+      more info that a server could potentially use in configuring a TLS
+      session, avoiding oferring mismatching sessions to such a server.
+      Previously only the server IP was used.
+
+JH/30 Fix string_copyn() for limit greater than actual string length.
+      Previously the copied amount was the limit, which could result in a
+      overlapping memcpy for newly allocated destination soon after a
+      source string shorter than the limit.  Found/investigated  by KM.
+
+JH/31 Bug 2886: GnuTLS: Do not free the cached creds on transport connection
+      close; it may be needed for a subsequent connection.  This caused a
+      SEGV on primary-MX defer.  Found/investigated by Gedalya & Andreas.
+
+JH/32 Fix CHUNKING for a second message on a connection when the first was
+      rejected.  Previously we did not reset the chunking-offered state, and
+      erroneously rejected the BDAT command.  Investigation help from
+      Jesse Hathaway.
+
+JH/33 Fis ${srs_encode ...} to handle an empty sender address, now returning
+      an empty address.  Previously the expansion returned an error.
+
+HS/01 Bug 2855: Handle a v4mapped sender address given us by a frontending
+      proxy.  Previously these were misparsed, leading to paniclog entries.
+
+
+Exim version 4.95
+-----------------
+
+JH/01 Bug 1329: Fix format of Maildir-format filenames to match other mail-
+      related applications.  Previously an "H" was used where available info
+      says that "M" should be, so change to match.
+
+JH/02 Bug 2587: Fix pam expansion condition.  Tainted values are commonly used
+      as arguments, so an implementation trying to copy these into a local
+      buffer was taking a taint-enforcement trap.  Fix by using dynamically
+      created buffers.  Similar fix for radius expansion condition.
+
+JH/03 Bug 2586: Fix listcount expansion operator.  Using tainted arguments is
+      reasonable, eg. to count headers.  Fix by using dynamically created
+      buffers rather than a local.  Do similar fixes for ACL actions "dcc",
+      "log_reject_target", "malware" and "spam"; the arguments are expanded
+      so could be handling tainted values.
+
+JH/04 Bug 2590: Fix -bi (newaliases).  A previous code rearrangement had
+      broken the (no-op) support for this sendmail command.  Restore it
+      to doing nothing, silently, and returning good status.
+
+JH/05 Bug 2593: Fix "vacation" in Exim filter.  Previously, when a "once"
+      record path was given (or the default used) without a leading directory
+      path, an error occurred on trying to open it.  Use the transport's working
+      directory.
+
+JH/06 Bug 2594: Change the name used for certificate name checks in the smtp
+      transport.  Previously it was the name on the DNS A-record; use instead
+      the head of the CNAME chain leading there (if there is one).  This seems
+      to align better with RFC 6125.
+
+JH/07 Bug 2597: Fix a resource leak.  Using a lookup in obtaining a value for
+      smtp_accept_max_per_host allocated resources which were not released
+      when the limit was exceeded.  This eventually crashed the daemon.  Fix
+      by adding a release action in that path.
+
+JH/08 Bug 2598: Fix verify ACL condition.  The options for the condition are
+      expanded; previously using tainted values was rejected.  Fix by using
+      dynamically-created buffers.
+
+JH/09 Relax restrictions on ACL verify condition needing access to message
+      headers.  Previously they were only permitted in data and non-smtp ACLs;
+      permit also mime, dkim, prdr quit and notquit.  Applies to header-syntax,
+      not_blind, header_sender and header_names_ascii verification.
+
+JH/10 Bug 2603: Fix coding of string copying to only evaluate arguments once.
+      Previously a macro used one argument twice; when called with the
+      argument as an expression having side-effects, incorrect operation
+      resulted.  Use an inlineable function.
+
+JH/11 Bug 2604: Fix request to cutthrough-deliver when a connection is already
+      held open for a verify callout.  Previously this wan not accounted for
+      and a corrupt onward SMTP conversation resulted.
+
+JH/12 Bug 2607: Fix the ${srs_encode } expansion to handle quoted local_parts.
+      Previously they were embedded naively in the constructed address; when
+      needed, strip the quoting and quote the entire local_part.
+      Also make the inbound_srs expansion condition handle quoting.
+
+JH/13 Fix dsearch "subdir" filter to ignore ".".  Previously only ".." was
+      excluded, not matching the documentation.
+
+JH/14 Bug 2606: Fix a segfault in sqlite lookups.  When no, or a bad, filename
+      was given for the sqlite_dbfile a trap resulted.
+
+JH/15 Bug 2620: Fix "spam" ACL condition.  Previously, tainted values for the
+      "name" argument resulted in a trap.  There is no reason to disallow such;
+      this was a coding error.
+
+JH/16 Bug 2615: Fix pause during message reception, on systems that have been
+      suspended/resumed.  The Linux CLOCK_MONOTONIC does not account for time
+      spent suspended, ignoring the POSIX definition.  Previously we assumed
+      it did and a constant offset from real time could be used as a correction.
+      Change to using the same clock source for the start-of-message and the
+      post-message next-tick-wait.  Also change to using CLOCK_BOOTTIME if it
+      exists, just to get a clock slightly more aligned to reality.
+
+JH/17 Bug 2295: Fix DKIM signing to always semicolon-terminate.  Although the
+      RFC says it is optional some validators care.  The missing char was not
+      intended but triggered by a line-wrap alignment.  Discovery and fix by
+      Guillaume Outters, hacked on by JH.
+
+JH/18 Bug 2617: Fix a taint trap in parse_fix_phrase().  Previously when the
+      name being quoted was tainted a trap would be taken.  Fix by using
+      dynamically created buffers.  The routine could have been called by a
+      rewrite with the "h" flag, by using the "-F" command-line option, or
+      by using a "name=" option on a control=submission ACL modifier.
+
+JH/19 SPF: change the Authentication-Results expansion component to give
+      smtp.helo when the sender domain is empty.  Previously it gave
+      "smtp.mailfrom=<>"
+
+JH/20 Bug 2631: ACL dnslist conditions now ignore and log any lookups returns
+      not in 127.0.0.0/8 to help in spotting list domains taken over by a
+      domain-parking registrar.
+
+JH/21 Bug 2630: Fix eol-replacement string for the ${readsocket } expansion.
+      Previously when a whitespace character was specified it was not inserted
+      after removing the newline.
+
+JH/22 Bug 2265: Force SNI usage for smtp transport DANE'd connections, to be
+      the domain part of the recipient address.  This overrides any tls_sni
+      option set, which was previously used.
+
+JH/23 Logging: with the +tls_sni log_selector, do not wrap the received SNI
+      in quotes.
+
+JH/24 Bug 2634: Fix a taint trap seen on NetBSD: the testing coded for
+      is_tainted() had an off-by-one error in the overenthusiastic direction.
+      Find and fix by Gavan.  Although NetBSD is not a supported platform for
+      4.94 this bug could affect other platforms.
+
+PP/01 Fix default prime selection to be consistent.
+      One path used ike23 still, instead of exim.dev.20160529.3; now both
+      execution flows will use the same DH primes (currently
+      exim.dev.20160529.3).
+
+JH/25 OpenSSL: Fix back-compatibility behaviour surrounding tls_certificates
+      option in smtp transport, to match the documentation.  Previously
+      verification was not being done in some cases where it should have been.
+
+JH/26 Bug 2646: fix a memory usage issue in ldap lookups.  Previously, when more
+      than one server was defined and depending on the platform memory layout
+      details, an internal consistency trap could be hit while walking the list
+      of servers.
+
+JH/27 Bug 2648: fix the passing of an authenticator public-name through spool
+      files.  The value is used by the authresults expansion item.  Previously
+      if this was used in a router or transport, a crash could result.
+
+JH/28 Fix spurious logging of select error.  Some platforms, notably FreeBSD,
+      have a sufficient incidence of EINTR returns from select that an
+      interaction with other operations done by the main daemon loop exposed
+      a bug in the error-handling.  This was benign apart from the log
+      messages.
+
+JH/29 Bug 2675: add outgoing-interface I= element to deferred "==" log lines,
+      for consistency with delivered "=>" and failed "**" lines.  While we're
+      there, handle PRX and TFO.
+
+JH/30 Bug 2677: fix matching of long addresses. Since 4.93 a limit of 256 was
+      applied. This resulted, if any header-line rewrite rules were configured,
+      in a panic-log triggerable by sending a message with a long address in
+      a header.	Fix by increasing the arbitrary limit to larger than a single
+      (dewrapped) 5322 header line maximum size.
+
+JH/31 The ESMTP option name advertised for the SUPPORT_EARLY_PIPE build option
+      is changed from X_PIPE_CONNECT to PIPE_CONNECT. This is in line with
+      RFC 6648 which deprecates X- options in protocols as a general practice.
+      Changeover between the implementations is handled by the mechanisms
+      already coded.
+
+JH/32 Bug 2599: fix delay of delivery to a local address where there is also
+      a remote which uses callout/hold.  Previously the local was queued.
+
+JH/33 Fix a taint trap in the ${listextract } expansion when the source data
+      was tainted.
+
+JH/34 Fix the placement of a multiple-message delivery marker in the delivery
+      log line. The asterisk is now consistently appended to the remote IP
+      (and port, if given), and will also be provided on defer and fail log
+      lines.  Previously it could be placed on the local IP if that was being
+      logged, and was only provided on delivery lines.
+
+JH/35 Bug 2343: Harden exim_tidydb against corrupt wait- files.
+
+JH/36 Bug 2687: Fix interpretation of multiple ^ chars in a plaintext
+      authenticator client_send option.  Previously the next char, after a pair
+      was collapsed, was taken verbatim (so ^^^foo became ^^foo; ^^^^foo became
+      ^^\x00foo). Fixed to get ^\x00foo and ^^foo respectively to match the
+      documentation.  There is still no way to get a leading ^ immediately
+      after a NUL (ie. for the password of a PLAIN method authenticator.
+
+JH/37 Enforce the expected size, for fixed-size records read from hints-DB
+      files.  For bad sizes read, delete the record and whine to paniclog.
+
+JH/38 When logging an AUTH failure, as server, do not include sensitive
+      information. Previously, the credentials would be included if given
+      as part of the AUTH command line and an ACL denied authentication.
+
+JH/39 Bug 2691: fix $local_part_data.  When the matching list element
+      referred to a file, bad data was returned.  This likely also affected
+      $domain_part_data.
+
+JH/40 The gsasl authenticator now supports caching of the salted password
+      generated by the client-side implementation.  This required the addition
+      of a new variable: $auth4.
+
+JH/41 Fix daemon SIGHUP on FreeBSD.  Previously, a named socket for IPC was
+      left undeleted; the attempt to re-create it then failed - resulting in
+      the usual "SIGHUP tp have daemon reload configuration" to not work.
+      This affected any platform not supporting "abstract" Unix-domain
+      sockets (i.e. not Linux).
+
+JH/42 Bug 2693: Harden against a peer which reneges on a 452 "too many
+      recipients" response to RCPT in a later response, with a 250.  The
+      previous coding assumed this would not happen, and under PIPELINING
+      would result in both lost and duplicate recipients for a message.
+
+JH/43 Bug 2694: Fix weighted distribution of work to multiple spamd servers.
+      Previously the weighting was incorrectly applied.  Similar fix for socks
+      proxies.  Found and fixed by Heiko Schlichting.
+
+JH/44 Bug 2701: Fix list-expansion of dns_ipv4_lookup.  Previously, it did
+      not handle sub-lists included using the +namedlist syntax.  While
+      investigating, the same found for dns_trust_aa, dns_again_means_nonexist,
+      dnssec_require_domains, dnssec_request_domains, srv_fail_domains,
+      mx_fail_domains.
+
+JH/45 Use a (new) separate store pool-pair for DKIM verify working data.
+      Previously the permanent pool was used, so the sore could not be freed.
+      This meant a connection with many messages would use continually-growing
+      memory.
+
+JH/46 Use an exponentially-increasing block size when malloc'ing store.  Do it
+      per-pool so as not to waste too much space.  Previously a constant size
+      was used which resulted in O(n^2) behaviour; now we get O(n log n) making
+      DOS attacks harder.  The cost is wasted memory use in the larger blocks.
+
+JH/47 Use explicit alloc/free for DNS lookup workspace.  This permits using the
+      same space repeatedly, and a smaller process footprint.
+
+JH/48 Use a less bogus-looking filename for a temporary used for DH-parameters
+      for GnuTLS.  Previously the name started "%s" which, while not a bug,
+      looked as if if might be one.
+
+JH/49 Bug 2710: when using SOCKS for additional messages after the first (a
+      "continued connection") make the $proxy_* variables available.  Previously
+      the information was not passed across the exec() call for subsequent
+      transport executions.  This also mean that the log lines for the
+      messages can show the proxy information.
+
+JH/50 Bug 2672: QT elements in log lines, unless disabled, now exclude the
+      receive time.  With modern systems the difference is significant.
+      The historical behaviour can be restored by disabling (a new) log_selector
+      "queue_time_exclusive".
+
+JH/51 Taint-check ACL line.  Previously, only filenames (for out-of-line ACL
+      content) were specifically tested for.  Now, also cover expansions
+      resulting in ACL names and inline ACL content.
+
+JH/52 Fix ${ip6norm:} operator.  Previously, any trailing line text was dropped,
+      making it unusable in complex expressions.
+
+JH/53 Bug 2743: fix immediate-delivery via named queue.  Previously this would
+      fail with a taint-check on the spoolfile name, and leave the message
+      queued.
+
+HS/01 Enforce absolute PID file path name.
+
+HS/02 Handle SIGINT as we handle SIGTERM: terminate the Exim process.
+
+PP/01 Add a too-many-bad-recipients guard to the default config's RCPT ACL.
+
+PP/02 Bug 2643: Correct TLS DH constants.
+      A missing NUL termination in our code-generation tool had led to some
+      incorrect Diffie-Hellman constants in the Exim source.
+      Reported by kylon94, code-gen tool fix by Simon Arlott.
+
+PP/03 Impose security length checks on various command-line options.
+      Fixes CVE-2020-SPRSS reported by Qualys.
+
+PP/04 Fix Linux security issue CVE-2020-SLCWD and guard against PATH_MAX
+      better.  Reported by Qualys.
+
+PP/05 Fix security issue CVE-2020-PFPSN and guard against cmdline invoker
+      providing a particularly obnoxious sender full name.
+      Reported by Qualys.
+
+PP/06 Fix CVE-2020-28016 (PFPZA): Heap out-of-bounds write in parse_fix_phrase()
+
+PP/07 Refuse to allocate too little memory, block negative/zero allocations.
+      Security guard.
+
+PP/08 Change default for recipients_max from unlimited to 50,000.
+
+PP/09 Fix security issue with too many recipients on a message (to remove a
+      known security problem if someone does set recipients_max to unlimited,
+      or if local additions add to the recipient list).
+      Fixes CVE-2020-RCPTL reported by Qualys.
+
+PP/10 Fix security issue in SMTP verb option parsing
+      Fixes CVE-2020-EXOPT reported by Qualys.
+
+PP/11 Fix security issue in BDAT state confusion.
+      Ensure we reset known-good where we know we need to not be reading BDAT
+      data, as a general case fix, and move the places where we switch to BDAT
+      mode until after various protocol state checks.
+      Fixes CVE-2020-BDATA reported by Qualys.
+
+HS/03 Die on "/../" in msglog file names
+
+QS/01 Creation of (database) files in $spool_dir: only uid=0 or the uid of
+      the Exim runtime user are allowed to create files.
+
+QS/02 PID file creation/deletion: only possible if uid=0 or uid is the Exim
+      runtime user.
+
+QS/03 When reading the output from interpreted forward files we do not
+      pass the pipe between the parent and the interpreting process to
+      executed child processes (if any).
+
+QS/04 Always die if requested from internal logging, even is logging is
+      disabled.
+
+JH/54 DMARC: recent versions of the OpenDMARC library appear to have broken
+      the API; compilation noo longer completes with DMARC support included.
+      This affects 1.4.1-1 on Fedora 33 (1.3.2-3 is functional); and has
+      been reported on other platforms.
+
+JH/55 TLS: as server, reject connections with ALPN indicating non-smtp use.
+
+JH/56 Make the majority of info read from config files readonly, for defence-in-
+      depth against exploits.  Suggestion by Qualys.
+      Not supported on Solaris 10.
+
+JH/57 Fix control=fakreject for a custom message containing tainted data.
+      Previously this resulted in a log complaint, due to a re-expansion present
+      since fakereject was originally introduced.
+
+JH/58 GnuTLS: Fix certextract expansion.  If a second modifier after a tag
+      modifier was given, a loop resulted.
+
+JH/59 DKIM: Fix small-message verification under TLS with chunking. If a
+      pipelined SMTP command followed the BDAT LAST then it would be
+      incorrectly treated as part of the message body, causing a verification
+      fail.
+
+JH/60 Bug 2805: Fix logging of domain-literals in Message_ID: headers. They
+      require looser validation rules than those for 821-level addresses,
+      which only permit IP addresses.
+
+
+Exim version 4.94
+-----------------
+
+JH/01 Avoid costly startup code when not strictly needed.  This reduces time
+      for some exim process initialisations.  It does mean that the logging
+      of TLS configuration problems is only done for the daemon startup.
+
+JH/02 Early-pipelining support code is now included unless disabled in Makefile.
+
+JH/03 DKIM verification defaults no long accept sha1 hashes, to conform to
+      RFC 8301.  They can still be enabled, using the dkim_verify_hashes main
+      option.
+
+JH/04 Support CHUNKING from an smtp transport using a transport_filter, when
+      DKIM signing is being done.  Previously a transport_filter would always
+      disable CHUNKING, falling back to traditional DATA.
+
+JH/05 Regard command-line recipients as tainted.
+
+JH/06 Bug 340: Remove the daemon pid file on exit, when due to SIGTERM.
+
+JH/07 Bug 2489: Fix crash in the "pam" expansion condition.  It seems that the
+      PAM library frees one of the arguments given to it, despite the
+      documentation.  Therefore a plain malloc must be used.
+
+JH/08 Bug 2491: Use tainted buffers for the transport smtp context.  Previously
+      on-stack buffers were used, resulting in a taint trap when DSN information
+      copied from a received message was written into the buffer.
+
+JH/09 Bug 2493: Harden ARC verify against Outlook, whick has been seen to mix
+      the ordering of its ARC headers.  This caused a crash.
+
+JH/10 Bug 2492: Use tainted memory for retry record when needed.  Previously when
+      a new record was being constructed with information from the peer, a trap
+      was taken.
+
+JH/11 Bug 2494: Unset the default for dmarc_tld_file.  Previously a naiive
+      installation would get error messages from DMARC verify, when it hit the
+      nonexistent file indicated by the default.  Distros wanting DMARC enabled
+      should both provide the file and set the option.
+      Also enforce no DMARC verification for command-line sourced messages.
+
+JH/12 Fix an uninitialised flag in early-pipelining.  Previously connections
+      could, depending on the platform, hang at the STARTTLS response.
+
+JH/13 Bug 2498: Reset a counter used for ARC verify before handling another
+      message on a connection.  Previously if one message had ARC headers and
+      the following one did not, a crash could result when adding an
+      Authentication-Results: header.
+
+JH/14 Bug 2500: Rewind some of the common-coding in string handling between the
+      Exim main code and Exim-related utities.  The introduction of taint
+      tracking also did many adjustments to string handling.  Since then, eximon
+      frequently terminated with an assert failure.
+
+JH/15 When PIPELINING, synch after every hundred or so RCPT commands sent and
+      check for 452 responses.  This slightly helps the inefficieny of doing
+      a large alias-expansion into a recipient-limited target.  The max_rcpt
+      transport option still applies (and at the current default, will override
+      the new feature).  The check is done for either cause of synch, and forces
+      a fast-retry of all 452'd recipients using a new MAIL FROM on the same
+      connection.  The new facility is not tunable at this time.
+
+JH/16 Fix the variables set by the gsasl authenticator.  Previously a pointer to
+      library live data was being used, so the results became garbage.  Make
+      copies while it is still usable.
+
+JH/17 Logging: when the deliver_time selector ise set, include the DT= field
+      on delivery deferred (==) and failed (**) lines (if a delivery was
+      attemtped).  Previously it was only on completion (=>) lines.
+
+JH/18 Authentication: the gsasl driver not provides the $authN variables in time
+      for the expansion of the server_scram_iter and server_scram_salt options.
+
+WB/01 SPF: DNS lookups for the obsolete SPF RR type done by the libspf2 library
+      are now specifically given a NO_DATA response without hitting the system
+      resolver.  The library goes on to do the now-standard TXT lookup.
+      Use of dnsdb lookups is not affected.
+
+JH/19 Bug 2507: Modules: on handling a dynamic-module (lookups) open failure,
+      only retrieve the errormessage once.  Previously two calls to dlerror()
+      were used, and the second one (for mainlog/paniclog) retrieved null
+      information.
+
+JH/20 Taint checking: disallow use of tainted data for
+      - the appendfile transport file and directory options
+      - the pipe transport command
+      - the autoreply transport file, log and once options
+      - file names used by the redirect router (including filter files)
+      - named-queue names
+      - paths used by single-key lookups
+      Previously this was permitted.
+
+JH/21 Bug 2501: Fix init call in the heimdal authenticator.  Previously it
+      adjusted the size of a major service buffer; this failed because the
+      buffer was in use at the time.  Change to a compile-time increase in the
+      buffer size, when this authenticator is compiled into exim.
+
+JH/22 Taint-checking: move to safe-mode taint checking on all platforms.  The
+      previous fast-mode was untenable in the face of glibs using mmap to
+      support larger malloc requests.
+
+PP/01 Update the openssl_options possible values through OpenSSL 1.1.1c.
+      New values supported, if defined on system where compiled:
+      allow_no_dhe_kex, cryptopro_tlsext_bug, enable_middlebox_compat,
+      no_anti_replay, no_encrypt_then_mac, prioritize_chacha, tlsext_padding
+
+JH/23 Performance improvement in the initial phase of a two-pass queue run.  By
+      running a limited number of proceses in parallel, a benefit is gained. The
+      amount varies with the platform hardware and load.  The use of the option
+      queue_run_in_order means we cannot do this, as ordering becomes
+      indeterminate.
+
+JH/24 Bug 2524: fix the cyrus_sasl auth driver gssapi usage.  A previous fix
+      had introduced a string-copy (for ensuring NUL-termination) which was not
+      appropriate for that case, which can include embedded NUL bytes in the
+      block of data.  Investigation showed the copy to actually be needless, the
+      data being length-specified.
+
+JH/25 Fix use of concurrent TLS connections under GnuTLS.  When a callout was
+      done during a receiving connection, and both used TLS, global info was
+      used rather than per-connection info for tracking the state of data
+      queued for transmission.  This could result in a connection hang.
+
+JH/26 Fix use of the SIZE parameter on MAIL commands, on continued connections.
+      Previously, when delivering serveral messages down a single connection
+      only the first would provide a SIZE.  This was due to the size information
+      not being properly tracked.
+
+JH/27 Bug 2530: When operating in a timezone with sub-minute offset, such as
+      TAI (at 37 seconds currently), pretend to be in UTC for time-related
+      expansion and logging.  Previously, spurious values such as a future
+      minute could be seen.
+
+JH/28 Bug 2533: Fix expansion of ${tr } item.  When called in some situations
+      it could crash from a null-deref.  This could also affect the
+      ${addresses: } operator and ${readsock } item.
+
+JH/29 Bug 2537: Fix $mime_part_count.  When a single connection had a non-mime
+      message following a mime one, the variable was not reset.
+
+JH/30 When an pipelined-connect fails at the first response, assume incorrect
+      cached capability (perhaps the peer reneged?) and immediately retry in
+      non-pipelined mode.
+
+JH/31 Fix spurious detection of timeout while writing to transport filter.
+
+JH/32 Bug 2541: Fix segfault on bad cmdline -f (sender) argument.  Previously
+      an attempt to copy the string was made before checking it.
+
+JH/33 Fix the dsearch lookup to return an untainted result.  Previously the
+      taint of the lookup key was maintained; we now regard the presence in the
+      filesystem as sufficient validation.
+
+JH/34 Fix the readsocket expansion to not segfault when an empty "options"
+      argument is supplied.
+
+JH/35 The dsearch lookup now requires that the directory is an absolute path.
+      Previously this was not checked, and nonempty relative paths made an
+      access under Exim's current working directory.
+
+JH/36 Bug 2554: Fix msg:defer event for the hosts_max_try_hardlimit case.
+      Previously no event was raised.
+
+JH/37 Bug 2552: Fix the check on spool space during reception to use the SIZE
+      parameter supplied by the sender MAIL FROM command.  Previously it was
+      ignored, and only the check_spool_space option value for the required
+      leeway checked.
+
+JH/38 Fix $dkim_key_length.  This should, after a DKIM verification, present
+      the size of the signing public-key.  Previously it was instead giving
+      the size of the signature hash.
+
+JH/39 DKIM verification: the RFC 8301 restriction on sizes of RSA keys is now
+      the default.  See the (new) dkim_verify_min_keysizes option.
+
+JH/40 Fix a memory-handling bug: when a connection carried multiple messages
+      and an ACL use a lookup for checking either the local_part or domain,
+      stale data could be accessed.  Ensure that variable references are
+      dropped between messages.
+
+JH/41 Bug 2571: Fix SPA authenticator.  Running as a server, an offset supplied
+      by the client was not checked as pointing within response data before
+      being used.  A malicious client could thus cause an out-of-bounds read and
+      possibly gain authentication.  Fix by adding the check.
+
+JH/42 Internationalisation: change the default for downconversion in the smtp
+      transport to be "if needed".  Previously it was "as previously set" for
+      the message, which usually meant "if needed" for message-submission but
+      "no" for everything else.  However, MTAs have been seen using SMTPUTF8
+      even when the envelope addresses did not need it, resulting in forwarding
+      failures to non-supporting MTAs.  A downconvert in such cases will be
+      a no-op on the addresses, merely dropping the use of SMTPUTF8 by the
+      transport.  The change does mean that addresses needing conversion will
+      be converted when previously a delivery failure would occur.
+
+JH/43 Fix possible long line in DSN.  Previously when a very long SMTP error
+      response was received it would be used unchecked in a fail-DSN, violating
+      standards on line-length limits.  Truncate if needed.
+
+HS/01 Remove parameters of the link to www.open-spf.org. The linked form
+      doesn't work. (Additionally add a new main config option to configure the
+      spf_smtp_comment)
+
+
+Exim version 4.93
+-----------------
+
+JH/01 OpenSSL: With debug enabled output keying information sufficient, server
+      side, to decode a TLS 1.3 packet capture.
+
+JH/02 OpenSSL: Suppress the sending of (stateful) TLS1.3 session tickets.
+      Previously the default library behaviour applied, sending two, each in
+      its own TCP segment.
+
+JH/03 Debug output for ACL now gives the config file name and line number for
+      each verb.
+
+JH/04 The default received_header_text now uses the RFC 8314 tls cipher clause.
+
+JH/05 DKIM: ensure that dkim_domain elements are lowercased before use.
+
+JH/06 Fix buggy handling of autoreply bounce_return_size_limit, and a possible
+      buffer overrun for (non-chunking) other transports.
+
+JH/07 GnuTLS: Our use of late (post-handshake) certificate verification, under
+      TLS1.3, means that a server rejecting a client certificate is not visible
+      to the client until the first read of encrypted data (typically the
+      response to EHLO).  Add detection for that case and treat it as a failed
+      TLS connection attempt, so that the normal retry-in-clear can work (if
+      suitably configured).
+
+JB/01 Bug 2375: fix expansions of 822 addresses having comments in local-part
+      and/or domain.  Found and fixed by Jason Betts.
+
+JH/08 Add hardening against SRV & TLSA lookups the hit CNAMEs (a nonvalid
+      configuration).  If a CNAME target was not a wellformed name pattern, a
+      crash could result.
+
+JH/09 Logging: Fix initial listening-on line for multiple ports for an IP when
+      the OS reports them interleaved with other addresses.
+
+JH/10 OpenSSL: Fix aggregation of messages.  Previously, when PIPELINING was
+      used both for input and for a verify callout, both encrypted, SMTP
+      responses being sent by the server could be lost.  This resulted in
+      dropped connections and sometimes bounces generated by a peer sending
+      to this system.
+
+JH/11 Harden plaintext authenticator against a badly misconfigured client-send
+      string.  Previously it was possible to cause undefined behaviour in a
+      library routine (usually a crash).  Found by "zerons".
+
+JH/12 Bug 2384: fix "-bP smtp_receive_timeout".  Previously it returned no
+      output.
+
+JH/13 Bug 2386: Fix builds with Dane under LibreSSL 2.9.0 onward.  Some old
+      API was removed, so update to use the newer ones.
+
+JH/14 Bug 1891: Close the log file if receiving a non-smtp message, without
+      any timeout set, is taking a long time.  Previously we would hang on to a
+      rotated logfile "forever" if the input was arriving with long gaps
+      (a previous attempt to fix addressed lack, for a long time, of initial
+      input).
+
+HS/01 Bug 2390: Use message_id for tempfile creation to avoid races in a
+      shared (NFS) environment. The length of the tempfile name is now
+      4 + 16 ("hdr.$message_exim_id") which might break on file
+      systems which restrict the file name length to lower values.
+      (It was "hdr.$pid".)
+
+HS/02 Bug 2390: Use message_id for tempfile creation to avoid races in a
+      shared (NFS) environment.
+
+HS/03 Bug 2392: exigrep does case sensitive *option* processing (as it
+      did for all versions <4.90). Notably -M, -m, --invert, -I may be
+      affected.
+
+JH/15 Use unsigned when creating bitmasks in macros, to avoid build errors
+      on some platforms for bit 31.
+
+JH/16 GnuTLS: rework ciphersuite strings under recent library versions.  Thanks
+      to changes apparently associated with TLS1.3 handling some of the APIs
+      previously used were either nonfunctional or inappropriate.  Strings
+      like TLS1.3:ECDHE_SECP256R1__RSA_PSS_RSAE_SHA256__AES_256_GCM__AEAD:256
+      and TLS1.2:ECDHE_SECP256R1__RSA_SHA256__AES_128_CBC__SHA256:128 replace
+      the previous TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256 .
+      This affects log line X= elements, the $tls_{in,out}_cipher variables,
+      and the use of specific cipher names in the encrypted= ACL condition.
+
+JH/17 OpenSSL: the default openssl_options now disables ssl_v3.
+
+JH/18 GnuTLS: fix $tls_out_ocsp under hosts_request_ocsp. Previously the
+      verification result was not updated unless hosts_require_ocsp applied.
+
+JH/19 Bug 2398: fix listing of a named-queue.  Previously, even with the option
+      queue_list_requires_admin set to false, non-admin users were denied the
+      facility.
+
+JH/20 Bug 2389: fix server advertising of usable certificates, under GnuTLS in
+      directory-of-certs mode.  Previously they were advertised despite the
+      documentation.
+
+JH/21 The smtp transport option "hosts_noproxy_tls" is now unset by default.
+      A single TCP connection by a client will now hold a TLS connection open
+      for multiple message deliveries, by default.  Previously the default was to
+      not do so.
+
+JH/22 The smtp transport option "hosts_try_dane" now enables all hosts by
+      default.  If built with the facility, DANE will be used.  The facility
+      SUPPORT_DANE is now enabled in the prototype build Makefile "EDITME".
+
+JH/23 The build default is now for TLS to be included; the SUPPORT_TLS define
+      is replaced with DISABLE_TLS.  Either USE_GNUTLS or (the new) USE_OPENSSL
+      must be defined and you must still, unless you define DISABLE_TLS, manage
+      the the include-dir and library-file requirements that go with that
+      choice.  Non-TLS builds are still supported.
+
+JH/24 Fix duplicated logging of peer name/address, on a transport connection-
+      reject under TFO.
+
+JH/25 The smtp transport option "hosts_try_fastopen" now enables all hosts by
+      default.  If the platform supports and has the facility enabled, it will
+      be requested on all coneections.
+
+JH/26 The PIPE_CONNECT facility is promoted from experimental status and is now
+      controlled by the build-time option SUPPORT_PIPE_CONNECT.
+
+PP/01 Unbreak heimdal_gssapi, broken in 4.92.
+
+JH/27 Bug 2404: Use the main-section configuration option "dsn_from" for
+      success-DSN messages.  Previously the From: header was always the default
+      one for these; the option was ignored.
+
+JH/28 Fix the timeout on smtp response to apply to the whole response.
+      Previously it was reset for every read, so a teergrubing peer sending
+      single bytes within the time limit could extend the connection for a
+      long time.  Credit to Qualsys Security Advisory Team for the discovery.
+
+JH/29 Fix DSN Final-Recipient: field.  Previously it was the post-routing
+      delivery address, which leaked information of the results of local
+      forwarding.  Change to the original envelope recipient address, per
+      standards.
+
+JH/30 Bug 2411: Fix DSN generation when RFC 3461 failure notification is
+      requested.  Previously not bounce was generated and a log entry of
+      error ignored was made.
+
+JH/31 Avoid re-expansion in ${sort } expansion. (CVE-2019-13917)
+
+JH/32 Introduce a general tainting mechanism for values read from the input
+      channel, and values derived from them.  Refuse to expand any tainted
+      values, to catch one form of exploit.
+
+JH/33 Bug 2413: Fix dkim_strict option.  Previously the expansion result
+      was unused and the unexpanded text used for the test.  Found and
+      fixed by Ruben Jenster.
+
+JH/34 Fix crash after TLS shutdown.  When the TCP/SMTP channel was left open,
+      an attempt to use a TLS library read routine dereffed a nul pointer,
+      causing a segfault.
+
+JH/35 Bug 2409: filter out-of-spec chars from callout response before using
+      them in our smtp response.
+
+JH/36 Have the general router option retry_use_local_part default to true when
+      any of the restrictive preconditions are set (to anything).  Previously it
+      was only for check_local user.  The change removes one item of manual
+      configuration which is required for proper retries when a remote router
+      handles a subset of addresses for a domain.
+
+JH/37 Appendfile: when evaluating quota use (non-quota_size_regex) take the file
+      link count into consideration.
+
+HS/04 Fix handling of very log lines in -H files. If a -<key> <value> line
+      caused the extension of big_buffer, the following lines were ignored.
+
+JH/38 Bug 1395: Teach the DNS negative-cache about TTL value from the SOA in
+      accordance with RFC 2308.  Previously there was no expiry, so a longlived
+      receive process (eg. due to ACL delays) versus a short SOA value could
+      surprise.
+
+HS/05 Handle trailing backslash gracefully. (CVE-2019-15846)
+
+JH/39 Promote DMARC support to mainline.
+
+JH/40 Bug 2452: Add a References: header to DSNs.
+
+JH/41 With GnuTLS 3.6.0 (and later) do not attempt to manage Diffie-Hellman
+      parameters.  The relevant library call is documented as "Deprecated: This
+      function is unnecessary and discouraged on GnuTLS 3.6.0 or later. Since
+      3.6.0, DH parameters are negotiated following RFC7919."
+
+HS/06 Change the default of dnssec_request_domains to "*"
+
+JH/42 Bug 2545: Fix CHUNKING for all RCPT commands rejected.  Previously we
+      carried on and emitted a BDAT command, even when PIPELINING was not
+      active.
+
+JH/43 Bug 2465: Fix taint-handling in dsearch lookup.  Previously a nontainted
+      buffer was used for the filename, resulting in a trap when tainted
+      arguments (eg. $domain) were used.
+
+JH/44 With OpenSSL 1.1.1 (onwards) disable renegotiation for TLS1.2 and below;
+      recommended to avoid a possible server-load attack.  The feature can be
+      re-enabled via the openssl_options main cofiguration option.
+
+JH/45 local_scan API: documented the current smtp_printf() call. This changed
+      for version 4.90 - adding a "more data" boolean to the arguments.
+      Bumped the ABI version number also, this having been missed previously;
+      release versions 4.90 to 4.92.3 inclusive were effectively broken in
+      respect of usage of smtp_printf() by either local_scan code or libraries
+      accessed via the ${dlfunc } expansion item.  Both will need coding
+      adjustment for any calls to smtp_printf() to match the new function
+      signature; a FALSE value for the new argument is always safe.
+
+JH/46 FreeBSD: fix use of the sendfile() syscall.  The shim was not updating
+      the file-offset (which the Linux syscall does, and exim expects); this
+      resulted in an indefinite loop.
+
+JH/47 ARC: fix crash in signing, triggered when a configuration error failed
+      to do ARC verification.  The Authentication-Results: header line added
+      by the configuration then had no ARC item.
+
+JH/48 Bug 2784: fix shutdown=no in the ${readsocket) expansion item.  Previously
+      an incorrect mode was used for reading the result, resulting in it being
+      ignored.
+
+
+Exim version 4.92
+-----------------
+
+JH/01 Remove code calling the customisable local_scan function, unless a new
+      definition "HAVE_LOCAL_SCAN=yes" is present in the Local/Makefile.
+
+JH/02 Bug 1007: Avoid doing logging from signal-handlers, as that can result in
+      non-signal-safe functions being used.
+
+JH/03 Bug 2269: When presented with a received message having a stupidly large
+      number of DKIM-Signature headers, disable DKIM verification to avoid
+      a resource-consumption attack.  The limit is set at twenty.
+
+JH/04 Add variables $arc_domains, $arc_oldest_pass for ARC verify.  Fix the
+      report of oldest_pass in ${authres } in consequence, and separate out
+      some descriptions of reasons for verification fail.
+
+JH/05 Bug 2273: Cutthrough delivery left a window where the received messsage
+      files in the spool were present and unlocked.  A queue-runner could spot
+      them, resulting in a duplicate delivery.  Fix that by doing the unlock
+      after the unlink.  Investigation by Tim Stewart.  Take the opportunity to
+      add more error-checking on spoolfile handling while that code is being
+      messed with.
+
+PP/01 Refuse to open a spool data file (*-D) if it's a symlink.
+      No known attacks, no CVE, this is defensive hardening.
+
+JH/06 Bug 2275: The MIME ACL unlocked the received message files early, and
+      a queue-runner could start a delivery while other operations were ongoing.
+      Cutthrough delivery was a common victim, resulting in duplicate delivery.
+      Found and investigated by Tim Stewart.  Fix by using the open message data
+      file handle rather than opening another, and not locally closing it (which
+      releases a lock) for that case, while creating the temporary .eml format
+      file for the MIME ACL.  Also applies to "regex" and "spam" ACL conditions.
+
+JH/07 Bug 177: Make a random-recipient callout success visible in ACL, by setting
+      $sender_verify_failure/$recipient_verify_failure to "random".
+
+JH/08 When generating a selfsigned cert, use serial number 1 since zero is not
+      legitimate.
+
+JH/09 Bug 2274: Fix logging of cmdline args when starting in an unlinked cwd.
+      Previously this would segfault.
+
+JH/10 Fix ARC signing for case when DKIM signing failed.  Previously this would
+      segfault.
+
+JH/11 Bug 2264: Exim now only follows CNAME chains one step by default. We'd
+      like zero, since the resolver should be doing this for us, But we need one
+      as a CNAME but no MX presence gets the CNAME returned; we need to check
+      that doesn't point to an MX to declare it "no MX returned" rather than
+      "error, loop".  A new main option is added so the older capability of
+      following some limited number of chain links is maintained.
+
+JH/12 Add client-ip info to non-pass iprev ${authres } lines.
+
+JH/13 For receent Openssl versions (1.1 onward) use modern generic protocol
+      methods.  These should support TLS 1.3; they arrived with TLS 1.3 and the
+      now-deprecated earlier definitions used only specified the range up to TLS
+      1.2 (in the older-version library docs).
+
+JH/14 Bug 2284: Fix DKIM signing for body lines starting with a pair of dots.
+
+JH/15 Rework TLS client-side context management.  Stop using a global, and
+      explicitly pass a context around.  This enables future use of TLS for
+      connections to service-daemons (eg. malware scanning) while a client smtp
+      connection is using TLS; with cutthrough connections this is quite likely.
+
+JH/16 Fix ARC verification to do AS checks in reverse order.
+
+JH/17 Support a "tls" option on the ${readsocket } expansion item.
+
+JH/18 Bug 2287: Fix the protocol name (eg utf8esmtp) for multiple messages
+      using the SMTPUTF8 option on their MAIL FROM commands, in one connection.
+      Previously the "utf8" would be re-prepended for every additional message.
+
+JH/19 Reject MAIL FROM commands with SMTPUTF8 when the facility was not advertised.
+      Previously thery were accepted, resulting in issues when attempting to
+      forward messages to a non-supporting MTA.
+
+PP/02 Let -n work with printing macros too, not just options.
+
+JH/20 Bug 2296: Fix cutthrough for >1 address redirection.  Previously only
+      one parent address was copied, and bogus data was used at delivery-logging
+      time.  Either a crash (after delivery) or bogus log data could result.
+      Discovery and analysis by Tim Stewart.
+
+PP/03 Make ${utf8clean:} expansion operator detect incomplete final character.
+      Previously if the string ended mid-character, we did not insert the
+      promised '?' replacement.
+
+PP/04 Documentation: current string operators work on bytes, not codepoints.
+
+JH/21 Change as many as possible of the global flags into one-bit bitfields; these
+      should pack well giving a smaller memory footprint so better caching and
+      therefore performance.  Group the declarations where this can't be done so
+      that the byte-sized flag variables are not interspersed among pointer
+      variables, giving a better chance of good packing by the compiler.
+
+JH/22 Bug 1896: Fix the envelope from for DMARC forensic reports to be possibly
+      non-null, to avoid issues with sites running BATV.  Previously reports were
+      sent with an empty envelope sender so looked like bounces.
+
+JH/23 Bug 2318: Fix the noerror command within filters.  It wasn't working.
+      The ignore_error flag wasn't being returned from the filter subprocess so
+      was not set for later routers.  Investigation and fix by Matthias Kurz.
+
+JH/24 Bug 2310: Raise a msg:fail:internal event for each undelivered recipient,
+      and a msg:complete for the whole, when a message is manually removed using
+      -Mrm.  Developement by Matthias Kurz, hacked on by JH.
+
+JH/25 Avoid fixed-size buffers for pathnames in DB access.  This required using
+      a "Gnu special" function, asprintf() in the DB utility binary builds; I
+      hope that is portable enough.
+
+JH/26 Bug 2311: Fix DANE-TA verification under GnuTLS.  Previously it was also
+      requiring a known-CA anchor certificate; make it now rely entirely on the
+      TLSA as an anchor.  Checking the name on the leaf cert against the name
+      on the A-record for the host is still done for TA (but not for EE mode).
+
+JH/27 Fix logging of proxy address.  Previously, a pointless "PRX=[]:0" would be
+      included in delivery lines for non-proxied connections, when compiled with
+      SUPPORT_SOCKS and running with proxy logging enabled.
+
+JH/28 Bug 2314: Fire msg:fail:delivery event even when error is being ignored.
+      Developement by Matthias Kurz, tweaked by JH.  While in that bit of code,
+      move the existing event to fire before the normal logging of message
+      failure so that custom logging is bracketed by normal logging.
+
+JH/29 Bug 2322: A "fail" command in a non-system filter (file) now fires the
+      msg:fail:internal event.  Developement by Matthias Kurz.
+
+JH/30 Bug 2329: Increase buffer size used for dns lookup from 2k, which was
+      far too small for todays use of crypto signatures stored there.  Go all
+      the way to the max DNS message size of 64kB, even though this might be
+      overmuch for IOT constrained device use.
+
+JH/31 Fix a bad use of a copy function, which could be used to pointlessly
+      copy a string over itself.  The library routine is documented as not
+      supporting overlapping copies, and on MacOS it actually raised a SIGABRT.
+
+JH/32 For main options check_spool_space and check_inode_space, where the
+      platform supports 64b integers, support more than the previous 2^31 kB
+      (i.e. more than 2 TB).  Accept E, P and T multipliers in addition to
+      the previous G, M, k.
+
+JH/33 Bug 2338: Fix the cyrus-sasl authenticator to fill in the
+      $authenticated_fail_id variable on authentication failure.  Previously
+      it was unset.
+
+JH/34 Increase RSA keysize of autogen selfsign cert from 1024 to 2048.  RHEL 8.0
+      OpenSSL didn't want to use such a weak key.  Do for GnuTLS also, and for
+      more-modern GnuTLS move from GNUTLS_SEC_PARAM_LOW to
+      GNUTLS_SEC_PARAM_MEDIUM.
+
+JH/35 OpenSSL: fail the handshake when SNI processing hits a problem, server
+      side.  Previously we would continue as if no SNI had been received.
+
+JH/36 Harden the handling of string-lists.  When a list consisted of a sole
+      "<" character, which should be a list-separator specification, we walked
+      off past the nul-terimation.
+
+JH/37 Bug 2341: Send "message delayed" warning MDNs (restricted to external
+      causes) even when the retry time is not yet met.  Previously they were
+      not, meaning that when (say) an account was over-quota and temp-rejecting,
+      and multiple senders' messages were queued, only one sender would get
+      notified on each configured delay_warning cycle.
+
+JH/38 Bug 2351: Log failures to extract envelope addresses from message headers.
+
+JH/39 OpenSSL: clear the error stack after an SSL_accept().  With anon-auth
+      cipher-suites, an error can be left on the stack even for a succeeding
+      accept; this results in impossible error messages when a later operation
+      actually does fail.
+
+AM/01 Bug 2359: GnuTLS: repeat lowlevel read and write operations while they
+      return error codes indicating retry.  Under TLS1.3 this becomes required.
+
+JH/40 Fix the feature-cache refresh for EXPERIMENTAL_PIPE_CONNECT.  Previously
+      it only wrote the new authenticators, resulting in a lack of tracking of
+      peer changes of ESMTP extensions until the next cache flush.
+
+JH/41 Fix the loop reading a message header line to check for integer overflow,
+      and more-often against header_maxsize.  Previously a crafted message could
+      induce a crash of the recive process; now the message is cleanly rejected.
+
+JH/42 Bug 2366: Fix the behaviour of the dkim_verify_signers option.  It had
+      been totally disabled for all of 4.91.  Discovery and fix by "Mad Alex".
+
+
+Exim version 4.91
+-----------------
+
+GF/01 DEFER rather than ERROR on redis cluster MOVED response.
+      When redis_servers is set to a list of > 1 element, and the Redis servers
+      in that list are in cluster configuration, convert the REDIS_REPLY_ERROR
+      case of MOVED into a DEFER case instead, thus moving the query onto the
+      next server in the list. For a cluster of N elements, all N servers must
+      be defined in redis_servers.
+
+GF/02 Catch and remove uninitialized value warning in exiqsumm
+      Check for existence of @ARGV before looking at $ARGV[0]
+
+JH/01 Replace the store_release() internal interface with store_newblock(),
+      which internalises the check required to safely use the old one, plus
+      the allocate and data copy operations duplicated in both (!) of the
+      extant use locations.
+
+JH/02 Disallow '/' characters in queue names specified for the "queue=" ACL
+      modifier.  This matches the restriction on the commandline.
+
+JH/03 Fix pgsql lookup for multiple result-tuples with a single column.
+      Previously only the last row was returned.
+
+JH/04 Bug 2217: Tighten up the parsing of DKIM signature headers. Previously
+      we assumed that tags in the header were well-formed, and parsed the
+      element content after inspecting only the first char of the tag.
+      Assumptions at that stage could crash the receive process on malformed
+      input.
+
+JH/05 Bug 2215: Fix crash associated with dnsdb lookup done from DKIM ACL.
+      While running the DKIM ACL we operate on the Permanent memory pool so that
+      variables created with "set" persist to the DATA ACL.  Also (at any time)
+      DNS lookups that fail create cache records using the Permanent pool.  But
+      expansions release any allocations made on the current pool - so a dnsdb
+      lookup expansion done in the DKIM ACL releases the memory used for the
+      DNS negative-cache, and bad things result.  Solution is to switch to the
+      Main pool for expansions.
+      While we're in that code, add checks on the DNS cache during store_reset,
+      active in the testsuite.
+      Problem spotted, and debugging aided, by Wolfgang Breyha.
+
+JH/06 Fix issue with continued-connections when the DNS shifts unreliably.
+      When none of the hosts presented to a transport match an already-open
+      connection, close it and proceed with the list.  Previously we would
+      queue the message.  Spotted by Lena with Yahoo, probably involving
+      round-robin DNS.
+
+JH/07 Bug 2214: Fix SMTP responses resulting from non-accept result of MIME ACL.
+      Previously a spurious "250 OK id=" response was appended to the proper
+      failure response.
+
+JH/08 The "support for" informational output now, which built with Content
+      Scanning support, has a line for the malware scanner interfaces compiled
+      in.  Interface can be individually included or not at build time.
+
+JH/09 The "aveserver", "kavdaemon" and "mksd" interfaces are now not included
+      by the template makefile "src/EDITME".  The "STREAM" support for an older
+      ClamAV interface method is removed.
+
+JH/10 Bug 2223: Fix mysql lookup returns for the no-data case (when the number of
+      rows affected is given instead).
+
+JH/11 The runtime Berkeley DB library version is now additionally output by
+      "exim -d -bV".  Previously only the compile-time version was shown.
+
+JH/12 Bug 2230: Fix cutthrough routing for nonfirst messages in an initiating
+      SMTP connection.  Previously, when one had more recipients than the
+      first, an abortive onward connection was made.  Move to full support for
+      multiple onward connections in sequence, handling cutthrough connection
+      for all multi-message initiating connections.
+
+JH/13 Bug 2229: Fix cutthrough routing for nonstandard port numbers defined by
+      routers.  Previously, a multi-recipient message would fail to match the
+      onward-connection opened for the first recipient, and cause its closure.
+
+JH/14 Bug 2174: A timeout on connect for a callout was also erroneously seen as
+      a timeout on read on a GnuTLS initiating connection, resulting in the
+      initiating connection being dropped.  This mattered most when the callout
+      was marked defer_ok.  Fix to keep the two timeout-detection methods
+      separate.
+
+JH/15 Relax results from ACL control request to enable cutthrough, in
+      unsupported situations, from error to silently (except under debug)
+      ignoring.  This covers use with PRDR, frozen messages, queue-only and
+      fake-reject.
+
+HS/01 Fix Buffer overflow in base64d() (CVE-2018-6789)
+
+JH/16 Fix bug in DKIM verify: a buffer overflow could corrupt the malloc
+      metadata, resulting in a crash in free().
+
+PP/01 Fix broken Heimdal GSSAPI authenticator integration.
+      Broken in f2ed27cf5, missing an equals sign for specified-initialisers.
+      Broken also in d185889f4, with init system revamp.
+
+JH/17 Bug 2113: Fix conversation closedown with the Avast malware scanner.
+      Previously we abruptly closed the connection after reading a malware-
+      found indication; now we go on to read the "scan ok" response line,
+      and send a quit.
+
+JH/18 Bug 2239: Enforce non-usability of control=utf8_downconvert in the mail
+      ACL.  Previously, a crash would result.
+
+JH/19 Speed up macro lookups during configuration file read, by skipping non-
+      macro text after a replacement (previously it was only once per line) and
+      by skipping builtin macros when searching for an uppercase lead character.
+
+JH/20 DANE support moved from Experimental to mainline.  The Makefile control
+      for the build is renamed.
+
+JH/21 Fix memory leak during multi-message connections using STARTTLS.  A buffer
+      was allocated for every new TLS startup, meaning one per message.  Fix
+      by only allocating once (OpenSSL) or freeing on TLS-close (GnuTLS).
+
+JH/22 Bug 2236: When a DKIM verification result is overridden by ACL, DMARC
+      reported the original.  Fix to report (as far as possible) the ACL
+      result replacing the original.
+
+JH/23 Fix memory leak during multi-message connections using STARTTLS under
+      OpenSSL.  Certificate information is loaded for every new TLS startup,
+      and the resources needed to be freed.
+
+JH/24 Bug 2242: Fix exim_dbmbuild to permit directoryless filenames.
+
+JH/25 Fix utf8_downconvert propagation through a redirect router.  Previously it
+      was not propagated.
+
+JH/26 Bug 2253: For logging delivery lines under PRDR, append the overall
+      DATA response info to the (existing) per-recipient response info for
+      the "C=" log element.  It can have useful tracking info from the
+      destination system.  Patch from Simon Arlott.
+
+JH/27 Bug 2251: Fix ldap lookups that return a single attribute having zero-
+      length value.  Previously this would segfault.
+
+HS/02 Support Avast multiline protoocol, this allows passing flags to
+      newer versions of the scanner.
+
+JH/28 Ensure that variables possibly set during message acceptance are marked
+      dead before release of memory in the daemon loop.  This stops complaints
+      about them when the debug_store option is enabled.  Discovered specifically
+      for sender_rate_period, but applies to a whole set of variables.
+      Do the same for the queue-runner and queue-list loops, for variables set
+      from spool message files.  Do the same for the SMTP per-message loop, for
+      certain variables indirectly set in ACL operations.
+
+JH/29 Bug 2250: Fix a longstanding bug in heavily-pipelined SMTP input (such
+      as a multi-recipient message from a mailinglist manager).  The coding had
+      an arbitrary cutoff number of characters while checking for more input;
+      enforced by writing a NUL into the buffer.  This corrupted long / fast
+      input.   The problem was exposed more widely when more pipelineing of SMTP
+      responses was introduced, and one Exim system was feeding another.
+      The symptom is log complaints of SMTP syntax error (NUL chars) on the
+      receiving system, and refused recipients seen by the sending system
+      (propating to people being dropped from mailing lists).
+      Discovered and pinpointed by David Carter.
+
+JH/30 The (EXPERIMENTAL_DMARC) variable $dmarc_ar_header is withdrawn, being
+      replaced by the ${authresults } expansion.
+
+JH/31 Bug 2257: Fix pipe transport to not use a socket-only syscall.
+
+HS/03 Set a handler for SIGTERM and call exit(3) if running as PID 1. This
+      allows proper process termination in container environments.
+
+JH/32 Bug 2258: Fix spool_wireformat in combination with LMTP transport.
+      Previously the "final dot" had a newline after it; ensure it is CR,LF.
+
+JH/33 SPF: remove support for the "spf" ACL condition outcome values "err_temp"
+      and "err_perm", deprecated since 4.83 when the RFC-defined words
+      "temperror" and "permerror" were introduced.
+
+JH/34 Re-introduce enforcement of no cutthrough delivery on transports having
+      transport-filters or DKIM-signing.  The restriction was lost in the
+      consolidation of verify-callout and delivery SMTP handling.
+      Extend the restriction to also cover ARC-signing.
+
+JH/35 Cutthrough: for a final-dot response timeout (and nonunderstood responses)
+      in defer=pass mode supply a 450 to the initiator.  Previously the message
+      would be spooled.
+
+PP/02 DANE: add dane_require_tls_ciphers SMTP Transport option; if unset,
+      tls_require_ciphers is used as before.
+
+HS/03 Malware Avast: Better match the Avast multiline protocol. Add
+      "pass_unscanned".  Only tmpfails from the scanner are written to
+      the paniclog, as they may require admin intervention (permission
+      denied, license issues). Other scanner errors (like decompression
+      bombs) do not cause a paniclog entry.
+
+JH/36 Fix reinitialisation of DKIM logging variable between messages.
+      Previously it was possible to log spurious information in receive log
+      lines.
+
+JH/37 Bug 2255: Revert the disable of the OpenSSL session caching.  This
+      triggered odd behaviour from Outlook Express clients.
+
+PP/03 Add util/renew-opendmarc-tlds.sh script for safe renewal of public
+      suffix list.
+
+JH/38 DKIM: accept Ed25519 pubkeys in SubjectPublicKeyInfo-wrapped form,
+      since the IETF WG has not yet settled on that versus the original
+      "bare" representation.
+
+JH/39 Fix syslog logging for syslog_timestamp=no and log_selector +millisec.
+      Previously the millisecond value corrupted the output.
+      Fix also for syslog_pid=no and log_selector +pid, for which the pid
+      corrupted the output.
+
+
+Exim version 4.90
+-----------------
+
+JH/01 Rework error string handling in TLS interface so that the caller in
+      more cases is responsible for logging.  This permits library-sourced
+      string to be attached to addresses during delivery, and collapses
+      pairs of long lines into single ones.
+
+PP/01 Allow PKG_CONFIG_PATH to be set in Local/Makefile and use it correctly
+      during configuration.  Wildcards are allowed and expanded.
+
+JH/02 Rework error string handling in DKIM to pass more info back to callers.
+      This permits better logging.
+
+JH/03 Rework the transport continued-connection mechanism: when TLS is active,
+      do not close it down and have the child transport start it up again on
+      the passed-on TCP connection.  Instead, proxy the child (and any
+      subsequent ones) for TLS via a unix-domain socket channel.  Logging is
+      affected: the continued delivery log lines do not have any DNSSEC, TLS
+      Certificate or OCSP information.  TLS cipher information is still logged.
+
+JH/04 Shorten the log line for daemon startup by collapsing adjacent sets of
+      identical IP addresses on different listening ports.  Will also affect
+      "exiwhat" output.
+
+PP/02 Bug 2070: uClibc defines __GLIBC__ without providing glibc headers;
+      add noisy ifdef guards to special-case this sillyness.
+      Patch from Bernd Kuhls.
+
+JH/05 Tighten up the checking in isip4 (et al): dotted-quad components larger
+      than 255 are no longer allowed.
+
+JH/06 Default openssl_options to include +no_ticket, to reduce load on peers.
+      Disable the session-cache too, which might reduce our load.  Since we
+      currrectly use a new context for every connection, both as server and
+      client, there is no benefit for these.
+      GnuTLS appears to not support tickets server-side by default (we don't
+      call gnutls_session_ticket_enable_server()) but client side is enabled
+      by default on recent versions (3.1.3 +) unless the PFS priority string
+      is used (3.2.4 +).
+
+PP/03 Add $SOURCE_DATE_EPOCH support for reproducible builds, per spec at
+      <https://reproducible-builds.org/specs/source-date-epoch/>.
+
+JH/07 Fix smtp transport use of limited max_rcpt under mua_wrapper. Previously
+      the check for any unsuccessful recipients did not notice the limit, and
+      erroneously found still-pending ones.
+
+JH/08 Pipeline CHUNKING command and data together, on kernels that support
+      MSG_MORE.  Only in-clear (not on TLS connections).
+
+JH/09 Avoid using a temporary file during transport using dkim.  Unless a
+      transport-filter is involved we can buffer the headers in memory for
+      creating the signature, and read the spool data file once for the
+      signature and again for transmission.
+
+JH/10 Enable use of sendfile in Linux builds as default.  It was disabled in
+      4.77 as the kernel support then wasn't solid, having issues in 64bit
+      mode.  Now, it's been long enough.  Add support for FreeBSD also.
+
+JH/11 Bug 2104: Fix continued use of a transport connection with TLS.  In the
+      case where the routing stage had gathered several addresses to send to
+      a host before calling the transport for the first, we previously failed
+      to close down TLS in the old transport process before passing the TCP
+      connection to the new process.  The new one sent a STARTTLS command
+      which naturally failed, giving a failed delivery and bloating the retry
+      database.  Investigation and fix prototype from Wolfgang Breyha.
+
+JH/12 Fix check on SMTP command input synchronisation.  Previously there were
+      false-negatives in the check that the sender had not preempted a response
+      or prompt from Exim (running as a server), due to that code's lack of
+      awareness of the SMTP input buffering.
+
+PP/04 Add commandline_checks_require_admin option.
+      Exim drops privileges sanely, various checks such as -be aren't a
+      security problem, as long as you trust local users with access to their
+      own account.  When invoked by services which pass untrusted data to
+      Exim, this might be an issue.  Set this option in main configuration
+      AND make fixes to the calling application, such as using `--` to stop
+      processing options.
+
+JH/13 Do pipelining under TLS.  Previously, although safe, no advantage was
+      taken.  Now take care to pack both (client) MAIL,RCPT,DATA, and (server)
+      responses to those, into a single TLS record each way (this usually means
+      a single packet).  As a side issue, smtp_enforce_sync now works on TLS
+      connections.
+
+PP/05 OpenSSL/1.1: use DH_bits() for more accurate DH param sizes.  This
+      affects you only if you're dancing at the edge of the param size limits.
+      If you are, and this message makes sense to you, then: raise the
+      configured limit or use OpenSSL 1.1.  Nothing we can do for older
+      versions.
+
+JH/14 For the "sock" variant of the malware scanner interface, accept an empty
+      cmdline element to get the documented default one.  Previously it was
+      inaccessible.
+
+JH/15 Fix a crash in the smtp transport caused when two hosts in succession
+      are unsuable for non-message-specific reasons - eg. connection timeout,
+      banner-time rejection.
+
+JH/16 Fix logging of delivery remote port, when specified by router, under
+      callout/hold.
+
+PP/06 Repair manualroute's ability to take options in any order, even if one
+      is the name of a transport.
+      Fixes bug 2140.
+
+HS/01 Cleanup, prevent repeated use of -p/-oMr (CVE-2017-1000369)
+
+JH/17 Change the list-building routines interface to use the expanding-string
+      triplet model, for better allocation and copying behaviour.
+
+JH/18 Prebuild the data-structure for "builtin" macros, for faster startup.
+      Previously it was constructed the first time a possibly-matching string
+      was met in the configuration file input during startup; now it is done
+      during compilation.
+
+JH/19 Bug 2141: Use the full-complex API for Berkeley DB rather than the legacy-
+      compatible one, to avoid the (poorly documented) possibility of a config
+      file in the working directory redirecting the DB files, possibly correpting
+      some existing file.  CVE-2017-10140 assigned for BDB.
+
+JH/20 Bug 2147: Do not defer for a verify-with-callout-and-random which is not
+      cache-hot.  Previously, although the result was properly cached, the
+      initial verify call returned a defer.
+
+JH/21 Bug 2151: Avoid using SIZE on the MAIL for a callout verify, on any but
+      the main verify for receipient in uncached-mode.
+
+JH/22 Retire historical build files to an "unsupported" subdir.  These are
+      defined as "ones for which we have no current evidence of testing".
+
+JH/23 DKIM: enforce the DNS pubkey record "h" permitted-hashes optional field,
+      if present.  Previously it was ignored.
+
+JH/24 Start using specified-initialisers in C structure init coding.  This is
+      a C99 feature (it's 2017, so now considered safe).
+
+JH/25 Use one-bit bitfields for flags in the "addr" data structure.  Previously
+      if was a fixed-sized field and bitmask ops via macros; it is now more
+      extensible.
+
+PP/07 GitHub PR 56: Apply MariaDB build fix.
+      Patch provided by Jaroslav Škarvada.
+
+PP/08 Bug 2161: Fix regression in sieve quoted-printable handling introduced
+      during Coverity cleanups [4.87 JH/47]
+      Diagnosis and fix provided by Michael Fischer v. Mollard.
+
+JH/26 Fix DKIM bug: when the pseudoheader generated for signing was exactly
+      the right size to place the terminating semicolon on its own folded
+      line, the header hash was calculated to an incorrect value thanks to
+      the (relaxed) space the fold became.
+
+HS/02 Fix Bug 2130: large writes from the transport subprocess were chunked
+      and confused the parent.
+
+JH/27 Fix SOCKS bug: an unitialized pointer was deref'd by the transport process
+      which could crash as a result.  This could lead to undeliverable messages.
+
+JH/28 Logging: "next input sent too soon" now shows where input was truncated
+      for log purposes.
+
+JH/29 Fix queue_run_in_order to ignore the PID portion of the message ID.  This
+      matters on fast-turnover and PID-randomising systems, which were getting
+      out-of-order delivery.
+
+JH/30 Fix a logging bug on aarch64: an unsafe routine was previously used for
+      a possibly-overlapping copy.  The symptom was that "Remote host closed
+      connection in response to HELO" was logged instead of the actual 4xx
+      error for the HELO.
+
+JH/31 Fix CHUNKING code to properly flush the unwanted chunk after an error.
+      Previously only that bufferd was discarded, resulting in SYMTP command
+      desynchronisation.
+
+JH/32 DKIM: when a message has multiple signatures matching an identity given
+      in dkim_verify_signers, run the dkim acl once for each.  Previously only
+      one run was done.  Bug 2189.
+
+JH/33 Downgrade an unfound-list name (usually a typo in the config file) from
+      "panic the current process" to "deliberately defer".  The panic log is
+      still written with the problem list name; the mail and reject logs now
+      get a temp-reject line for the message that was being handled, saying
+      something like "domains check lookup or other defer".  The SMTP 451
+      message is still "Temporary local problem".
+
+JH/34 Bug 2199: Fix a use-after-free while reading smtp input for header lines.
+      A crafted sequence of BDAT commands could result in in-use memory beeing
+      freed.  CVE-2017-16943.
+
+HS/03 Bug 2201: Fix checking for leading-dot on a line during headers reading
+      from SMTP input.  Previously it was always done; now only done for DATA
+      and not BDAT commands.  CVE-2017-16944.
+
+JH/35 Bug 2201: Flush received data in BDAT mode after detecting an error fatal
+      to the message (such as an overlong header line).  Previously this was
+      not done and we did not exit BDAT mode.  Followon from the previous item
+      though a different problem.
+
+
+Exim version 4.89
+-----------------
+
+JH/01 Bug 1922: Support IDNA2008.  This has slightly different conversion rules
+      than -2003 did; needs libidn2 in addition to libidn.
+
+JH/02 The path option on a pipe transport is now expanded before use.
+
+PP/01 GitHub PR 50: Do not call ldap_start_tls_s on ldapi:// connections.
+      Patch provided by "Björn", documentation fix added too.
+
+JH/03 Bug 2003: fix Proxy Protocol v2 handling: the address size field was
+      missing a wire-to-host endian conversion.
+
+JH/04 Bug 2004: fix CHUNKING in non-PIPELINEING mode.  Chunk data following
+      close after a BDAT command line could be taken as a following command,
+      giving a synch failure.  Fix by only checking for synch immediately
+      before acknowledging the chunk.
+
+PP/02 GitHub PR 52: many spelling fixes, which include fixing parsing of
+      no_require_dnssec option and creation of _HAVE_TRANSPORT_APPEND_MAILDIR
+      macro.  Patches provided by Josh Soref.
+
+JH/05 Have the EHLO response advertise VRFY, if there is a vrfy ACL defined.
+      Previously we did not; the RFC seems ambiguous and VRFY is not listed
+      by IANA as a service extension.  However, John Klensin suggests that we
+      should.
+
+JH/06 Bug 2017: Fix DKIM verification in -bh test mode.  The data feed into
+      the dkim code may be unix-mode line endings rather than smtp wire-format
+      CRLF, so prepend a CR to any bare LF.
+
+JH/07 Rationalise the coding for callout smtp conversations and transport ones.
+      As a side-benfit, callouts can now use PIPELINING hence fewer round-trips.
+
+JH/08 Bug 2016: Fix DKIM verification vs. CHUNKING.  Any BDAT commands after
+      the first were themselves being wrongly included in the feed into dkim
+      processing; with most chunk sizes in use this resulted in an incorrect
+      body hash calculated value.
+
+JH/09 Bug 2014: permit inclusion of a DKIM-Signature header in a received
+      DKIM signature block, for verification.  Although advised against by
+      standards it is specifically not ruled illegal.
+
+JH/10 Bug 2025: Fix reception of (quoted) local-parts with embedded spaces.
+
+JH/11 Bug 2029: Fix crash in DKIM verification when a message signature block is
+      missing a body hash (the bh= tag).
+
+JH/12 Bug 2018: Re-order Proxy Protocol startup versus TLS-on-connect startup.
+      It seems that HAProxy sends the Proxy Protocol information in clear and
+      only then does a TLS startup, so do the same.
+
+JH/13 Bug 2027: Avoid attempting to use TCP Fast Open for non-transport client
+      TCP connections (such as for Spamd) unless the daemon successfully set
+      Fast Open mode on its listening sockets.  This fixes breakage seen on
+      too-old kernels or those not configured for Fast Open, at the cost of
+      requiring both directions being enabled for TFO, and TFO never being used
+      by non-daemon-related Exim processes.
+
+JH/14 Bug 2000: Reject messages recieved with CHUNKING but with malformed line
+      endings, at least on the first header line.  Try to canonify any that get
+      past that check, despite the cost.
+
+JH/15 Angle-bracket nesting (an error inserted by broken sendmails) levels are
+      now limited to an arbitrary five deep, while parsing addresses with the
+      strip_excess_angle_brackets option enabled.
+
+PP/03 Bug 2018: For Proxy Protocol and TLS-on-connect, do not over-read and
+      instead leave the unprompted TLS handshake in socket buffer for the
+      TLS library to consume.
+
+PP/04 Bug 2018: Also handle Proxy Protocol v2 safely.
+
+PP/05 FreeBSD compat: handle that Ports no longer create /usr/bin/perl
+
+JH/16 Drop variables when they go out of scope.  Memory management drops a whole
+      region in one operation, for speed, and this leaves assigned pointers
+      dangling.  Add checks run only under the testsuite which checks all
+      variables at a store-reset and panics on a dangling pointer; add code
+      explicitly nulling out all the variables discovered.  Fixes one known
+      bug: a transport crash, where a dangling pointer for $sending_ip_address
+      originally assigned in a verify callout, is re-used.
+
+PP/06 Drop '.' from @INC in various Perl scripts.
+
+PP/07 Switch FreeBSD iconv to always use the base-system libc functions.
+
+PP/08 Reduce a number of compilation warnings under clang; building with
+      CC=clang CFLAGS+=-Wno-dangling-else -Wno-logical-op-parentheses
+      should be warning-free.
+
+JH/17 Fix inbound CHUNKING when DKIM disabled at runtime.
+
+HS/01 Fix portability problems introduced by PP/08 for platforms where
+      realloc(NULL) is not equivalent to malloc() [SunOS et al].
+
+HS/02 Bug 1974: Fix missing line terminator on the last received BDAT
+      chunk. This allows us to accept broken chunked messages. We need a more
+      general solution here.
+
+PP/09 Wrote util/chunking_fixqueue_finalnewlines.pl to help recover
+      already-broken messages in the queue.
+
+JH/18 Bug 2061: Fix ${extract } corrupting an enclosing ${reduce }  $value.
+
+JH/19 Fix reference counting bug in routing-generated-address tracking.
+
+
+Exim version 4.88
+-----------------
+
+JH/01 Use SIZE on MAIL FROM in a cutthrough connection, if the destination
+      supports it and a size is available (ie. the sending peer gave us one).
+
+JH/02 The obsolete acl condition "demime" is removed (finally, after ten
+      years of being deprecated). The replacements are the ACLs
+      acl_smtp_mime and acl_not_smtp_mime.
+
+JH/03 Upgrade security requirements imposed for hosts_try_dane: previously
+      a downgraded non-dane trust-anchor for the TLS connection (CA-style)
+      or even an in-clear connection were permitted.  Now, if the host lookup
+      was dnssec and dane was requested then the host is only used if the
+      TLSA lookup succeeds and is dnssec.  Further hosts (eg. lower priority
+      MXs) will be tried (for hosts_try_dane though not for hosts_require_dane)
+      if one fails this test.
+      This means that a poorly-configured remote DNS will make it incommunicado;
+      but it protects against a DNS-interception attack on it.
+
+JH/04 Bug 1810: make continued-use of an open smtp transport connection
+      non-noisy when a race steals the message being considered.
+
+JH/05 If main configuration option tls_certificate is unset, generate a
+      self-signed certificate for inbound TLS connections.
+
+JH/06 Bug 165: hide more cases of password exposure - this time in expansions
+      in rewrites and routers.
+
+JH/07 Retire gnutls_require_mac et.al.  These were nonfunctional since 4.80
+      and logged a warning sing 4.83; now they are a configuration file error.
+
+JH/08 Bug 1836: Fix crash in VRFY handling when handed an unqualified name
+      (lacking @domain).  Apply the same qualification processing as RCPT.
+
+JH/09 Bug 1804: Avoid writing msglog files when in -bh or -bhc mode.
+
+JH/10 Support ${sha256:} applied to a string (as well as the previous
+      certificate).
+
+JH/11 Cutthrough: avoid using the callout hints db on a verify callout when
+      a cutthrough deliver is pending, as we always want to make a connection.
+      This also avoids re-routing the message when later placing the cutthrough
+      connection after a verify cache hit.
+      Do not update it with the verify result either.
+
+JH/12 Cutthrough: disable when verify option success_on_redirect is used, and
+      when routing results in more than one destination address.
+
+JH/13 Cutthrough: expand transport dkim_domain option when testing for dkim
+      signing (which inhibits the cutthrough capability).  Previously only
+      the presence of an option was tested; now an expansion evaluating as
+      empty is permissible (obviously it should depend only on data available
+      when the cutthrough connection is made).
+
+JH/14 Fix logging of errors under PIPELINING.  Previously the log line giving
+      the relevant preceding SMTP command did not note the pipelining mode.
+
+JH/15 Fix counting of empty lines in $body_linecount and $message_linecount.
+      Previously they were not counted.
+
+JH/16 DANE: treat a TLSA lookup response having all non-TLSA RRs, the same
+      as one having no matching records.  Previously we deferred the message
+      that needed the lookup.
+
+JH/17 Fakereject: previously logged as a normal message arrival "<="; now
+      distinguished as "(=".
+
+JH/18 Bug 1867: make the fail_defer_domains option on a dnslookup router work
+      for missing MX records.  Previously it only worked for missing A records.
+
+JH/19 Bug 1850: support Radius libraries that return REJECT_RC.
+
+JH/20 Bug 1872: Ensure that acl_smtp_notquit is run when the connection drops
+      after the data-go-ahead and data-ack.  Patch from Jason Betts.
+
+JH/21 Bug 1846: Send DMARC forensic reports for reject and quarantine results,
+      even for a "none" policy.  Patch from Tony Meyer.
+
+JH/22 Fix continued use of a connection for further deliveries. If a port was
+      specified by a router, it must also match for the delivery to be
+      compatible.
+
+JH/23 Bug 1874: fix continued use of a connection for further deliveries.
+      When one of the recipients of a message was unsuitable for the connection
+      (has no matching addresses), we lost track of needing to mark it
+      deferred.  As a result mail would be lost.
+
+JH/24 Bug 1832: Log EHLO response on getting conn-close response for HELO.
+
+JH/25 Decoding ACL controls is now done using a binary search; the source code
+      takes up less space and should be simpler to maintain.  Merge the ACL
+      condition decode tables also, with similar effect.
+
+JH/26 Fix problem with one_time used on a redirect router which returned the
+      parent address unchanged.  A retry would see the parent address marked as
+      delivered, so not attempt the (identical) child.  As a result mail would
+      be lost.
+
+JH/27 Fix a possible security hole, wherein a process operating with the Exim
+      UID can gain a root shell.  Credit to http://www.halfdog.net/ for
+      discovery and writeup.  Ubuntu bug 1580454; no bug raised against Exim
+      itself :(
+
+JH/28 Enable {spool,log} filesystem space and inode checks as default.
+      Main config options check_{log,spool}_{inodes,space} are now
+      100 inodes, 10MB unless set otherwise in the configuration.
+
+JH/29 Fix the connection_reject log selector to apply to the connect ACL.
+      Previously it only applied to the main-section connection policy
+      options.
+
+JH/30 Bug 1897: fix callouts connection fallback from TLS to cleartext.
+
+PP/01 Changed default Diffie-Hellman parameters to be Exim-specific, created
+      by me.  Added RFC7919 DH primes as an alternative.
+
+PP/02 Unbreak build via pkg-config with new hash support when crypto headers
+      are not in the system include path.
+
+JH/31 Fix longstanding bug with aborted TLS server connection handling.  Under
+      GnuTLS, when a session startup failed (eg because the client disconnected)
+      Exim did stdio operations after fclose.  This was exposed by a recent
+      change which nulled out the file handle after the fclose.
+
+JH/32 Bug 1909: Fix OCSP proof verification for cases where the proof is
+      signed directly by the cert-signing cert, rather than an intermediate
+      OCSP-signing cert.  This is the model used by LetsEncrypt.
+
+JH/33 Bug 1914: Ensure socket is nonblocking before draining after SMTP QUIT.
+
+HS/01 Fix leak in verify callout under GnuTLS, about 3MB per recipient on
+      an incoming connection.
+
+HS/02 Bug 1802: Do not half-close the connection after sending a request
+      to rspamd.
+
+HS/03 Use "auto" as the default EC curve parameter. For OpenSSL < 1.0.2
+      fallback to "prime256v1".
+
+JH/34 SECURITY: Use proper copy of DATA command in error message.
+      Could leak key material.  Remotely exploitable.  CVE-2016-9963.
+
+
+Exim version 4.87
+-----------------
+
+JH/01 Bug 1664: Disable OCSP for GnuTLS library versions at/before 3.3.16
+      and 3.4.4 - once the server is enabled to respond to an OCSP request
+      it does even when not requested, resulting in a stapling non-aware
+      client dropping the TLS connection.
+
+TF/01 Code cleanup: Overhaul the debug_selector and log_selector machinery to
+      support variable-length bit vectors. No functional change.
+
+TF/02 Improve the consistency of logging incoming and outgoing interfaces.
+      The I= interface field on outgoing lines is now after the H= remote
+      host field, same as incoming lines. There is a separate
+      outgoing_interface log selector which allows you to disable the
+      outgoing I= field.
+
+JH/02 Bug 728: Close logfiles after a daemon-process "exceptional" log write.
+      If not running log_selector +smtp_connection the mainlog would be held
+      open indefinitely after a "too many connections" event, including to a
+      deleted file after a log rotate. Leave the per net connection logging
+      leaving it open for efficiency as that will be quickly detected by the
+      check on the next write.
+
+HS/01 Bug 1671: Fix post transport crash.
+      Processing the wait-<transport> messages could crash the delivery
+      process if the message IDs didn't exist for some reason. When
+      using 'split_spool_directory=yes' the construction of the spool
+      file name failed already, exposing the same netto behaviour.
+
+JH/03 Bug 425: Capture substrings in $regex1, $regex2 etc from regex &
+      mime_regex ACL conditions.
+
+JH/04 Bug 1686: When compiled with EXPERIMENTAL_DSN_INFO: Add extra information
+      to DSN fail messages (bounces): remote IP, remote greeting, remote response
+      to HELO, local diagnostic string.
+
+JH/05 Downgrade message for a TLS-certificate-based authentication fail from
+      log line to debug.  Even when configured with a tls authenticator many
+      client connections are expected to not authenticate in this way, so
+      an authenticate fail is not an error.
+
+HS/02 Add the Exim version string to the process info.  This way exiwhat
+      gives some more detail about the running daemon.
+
+JH/06 Bug 1395: time-limit caching of DNS lookups, to the TTL value.  This may
+      matter for fast-change records such as DNSBLs.
+
+JH/07 Bug 1678: Always record an interface option value, if set,  as part of a
+      retry record, even if constant.  There may be multiple transports with
+      different interface settings and the retry behaviour needs to be kept
+      distinct.
+
+JH/08 Bug 1586: exiqgrep now refuses to run if there are unexpected arguments.
+
+JH/09 Bug 1700: ignore space & tab embedded in base64 during decode.
+
+JH/10 Bug 840: fix log_defer_output option of pipe transport
+
+JH/11 Bug 830: use same host for all RCPTS of a message, even under
+      hosts_randomize.  This matters a lot when combined with mua_wrapper.
+
+JH/12 Bug 1706: percent and underbar characters are no longer escaped by the
+      ${quote_pgsql:<string>} operator.
+
+JH/13 Bug 1708: avoid misaligned access in cached lookup.
+
+JH/14 Change header file name for freeradius-client.  Relevant if compiling
+      with Radius support; from the Gentoo tree and checked under Fedora.
+
+JH/15 Bug 1712: Introduce $prdr_requested flag variable
+
+JH/16 Bug 1714: Permit an empty string as expansion result for transport
+      option transport_filter, meaning no filtering.
+
+JH/17 Bug 1713: Fix non-PDKIM_DEBUG build.  Patch from Jasen Betts.
+
+JH/18 Bug 1709: When built with TLS support, the tls_advertise_hosts option now
+      defaults to "*" (all hosts).  The variable is now available when not built
+      with TLS, default unset, mainly to enable keeping the testsuite sane.
+      If a server certificate is not supplied (via tls_certificate) an error is
+      logged, and clients will find TLS connections fail on startup.  Presumably
+      they will retry in-clear.
+      Packagers of Exim are strongly encouraged to create a server certificate
+      at installation time.
+
+HS/03 Add -bP config_file as a synonym for -bP configure_file, for consistency
+      with the $config_file variable.
+
+JH/19 Two additional event types: msg:rcpt:defer and msg:rcpt:host:defer. Both
+      in transport context, after the attempt, and per-recipient. The latter type
+      is per host attempted.  The event data is the error message, and the errno
+      information encodes the lookup type (A vs. MX) used for the (first) host,
+      and the trailing two digits of the smtp 4xx response.
+
+GF/01 Bug 1715: Fix for race condition in exicyclog, where exim could attempt
+      to write to mainlog (or rejectlog, paniclog) in the window between file
+      creation and permissions/ownership being changed. Particularly affects
+      installations where exicyclog is run as root, rather than exim user;
+      result is that the running daemon panics and dies.
+
+JH/20 Bug 1701: For MySQL lookups, support MySQL config file option group names.
+
+JH/21 Bug 1720: Add support for priority groups and weighted-random proxy
+      selection for the EXPERIMENTAL_SOCKS feature, via new per-proxy options
+      "pri" and "weight".  Note that the previous implicit priority given by the
+      list order is no longer honoured.
+
+JH/22 Bugs 963, 1721: Fix some corner cases in message body canonicalization
+      for DKIM processing.
+
+JH/23 Move SOCKS5 support from Experimental to mainline, enabled for a build
+      by defining SUPPORT_SOCKS.
+
+JH/26 Move PROXY support from Experimental to mainline, enabled for a build
+      by defining SUPPORT_PROXY.  Note that the proxy_required_hosts option
+      is renamed to hosts_proxy, and the proxy_{host,target}_{address,port}.
+      variables are renamed to proxy_{local,external}_{address,port}.
+
+JH/27 Move Internationalisation support from Experimental to mainline, enabled
+      for a build by defining SUPPORT_I18N
+
+JH/28 Bug 1745: Fix redis lookups to handle (quoted) spaces embedded in parts
+      of the query string, and make ${quote_redis:} do that quoting.
+
+JH/29 Move Events support from Experimental to mainline, enabled by default
+      and removable for a build by defining DISABLE_EVENT.
+
+JH/30 Updated DANE implementation code to current from Viktor Dukhovni.
+
+JH/31 Fix bug with hosts_connection_nolog and named-lists which were wrongly
+      cached by the daemon.
+
+JH/32 Move Redis support from Experimental to mainline, enabled for a build
+      by defining LOOKUP_REDIS. The libhiredis library is required.
+
+JH/33 Bug 1748: Permit ACL dnslists= condition in non-smtp ACLs if explicit
+      keys are given for lookup.
+
+JH/34 Bug 1192: replace the embedded copy of PolarSSL RSA routines in the DKIM
+      support, by using OpenSSL or GnuTLS library ones.  This means DKIM is
+      only supported when built with TLS support.  The PolarSSL SHA routines
+      are still used when the TLS library is too old for convenient support.
+
+JH/35 Require SINGLE_DH_USE by default in OpenSSL (main config option
+      openssl_options), for security.  OpenSSL forces this from version 1.1.0
+      server-side so match that on older versions.
+
+JH/36 Bug 1778: longstanding bug in memory use by the ${run } expansion: A fresh
+      allocation for $value could be released as the expansion processing
+      concluded, but leaving the global pointer active for it.
+
+JH/37 Bug 1769: Permit a VRFY ACL to override the default 252 response,
+      and to use the domains and local_parts ACL conditions.
+
+JH/38 Fix cutthrough bug with body lines having a single dot. The dot was
+      incorrectly not doubled on cutthrough transmission, hence seen as a
+      body-termination at the receiving system - resulting in truncated mails.
+      Commonly the sender saw a TCP-level error, and retransmitted the message
+      via the normal store-and-forward channel. This could result in duplicates
+      received - but deduplicating mailstores were liable to retain only the
+      initial truncated version.
+
+JH/39 Bug 1781: Fix use of DKIM private-keys having trailing '=' in the base-64.
+
+JH/40 Fix crash in queryprogram router when compiled with EXPERIMENTAL_SRS.
+
+JH/41 Bug 1792: Fix selection of headers to sign for DKIM: bottom-up.  While
+      we're in there, support oversigning also; bug 1309.
+
+JH/42 Bug 1796: Fix error logged on a malware scanner connection failure.
+
+HS/04 Add support for keep_environment and add_environment options.
+
+JH/43 Tidy coding issues detected by gcc --fsanitize=undefined.  Some remain;
+      either intentional arithmetic overflow during PRNG, or testing config-
+      induced overflows.
+
+JH/44 Bug 1800: The combination of a -bhc commandline option and cutthrough
+      delivery resulted in actual delivery.  Cancel cutthrough before DATA
+      stage.
+
+JH/45 Fix cutthrough, when connection not opened by verify and target hard-
+      rejects a recipient: pass the reject to the originator.
+
+JH/46 Multiple issues raised by Coverity. Some were obvious or plausible bugs.
+      Many were false-positives and ignorable, but it's worth fixing the
+      former class.
+
+JH/47 Fix build on HP-UX and older Solaris, which need (un)setenv now also
+      for the new environment-manipulation done at startup.  Move the routines
+      from being local to tls.c to being global via the os.c file.
+
+JH/48 Bug 1807: Fix ${extract } for the numeric/3-string case. While preparsing
+      an extract embedded as result-arg for a map, the first arg for extract
+      is unavailable so we cannot tell if this is a numbered or keyed
+      extraction.  Accept either.
+
+
+Exim version 4.86
+-----------------
+
+JH/01 Bug 1545: The smtp transport option "retry_include_ip_address" is now
+      expanded.
+
+JH/02 The smtp transport option "multi_domain" is now expanded.
+
+JH/03 The smtp transport now requests PRDR by default, if the server offers
+      it.
+
+JH/04 Certificate name checking on server certificates, when exim is a client,
+      is now done by default.  The transport option tls_verify_cert_hostnames
+      can be used to disable this per-host.  The build option
+      EXPERIMENTAL_CERTNAMES is withdrawn.
+
+JH/05 The value of the tls_verify_certificates smtp transport and main options
+      default to the word "system" to access the system default CA bundle.
+      For GnuTLS, only version 3.0.20 or later.
+
+JH/06 Verification of the server certificate for a TLS connection is now tried
+      (but not required) by default.  The verification status is now logged by
+      default, for both outbound TLS and client-certificate supplying inbound
+      TLS connections
+
+JH/07 Changed the default rfc1413 lookup settings to disable calls.  Few
+      sites use this now.
+
+JH/08 The EXPERIMENTAL_DSN compile option is no longer needed; all Delivery
+      Status Notification (bounce) messages are now MIME format per RFC 3464.
+      Support for RFC 3461 DSN options NOTIFY,ENVID,RET,ORCPT can be advertised
+      under the control of the dsn_advertise_hosts option, and routers may
+      have a dsn_lasthop option.
+
+JH/09 A timeout of 2 minutes is now applied to all malware scanner types by
+      default, modifiable by a malware= option.  The list separator for
+      the options can now be changed in the usual way.  Bug 68.
+
+JH/10 The smtp_receive_timeout main option is now expanded before use.
+
+JH/11 The incoming_interface log option now also enables logging of the
+      local interface on delivery outgoing connections.
+
+JH/12 The cutthrough-routing facility now supports multi-recipient mails,
+      if the interface and destination host and port all match.
+
+JH/13 Bug 344: The verify = reverse_host_lookup ACL condition now accepts a
+      /defer_ok option.
+
+JH/14 Bug 1573: The spam= ACL condition now additionally supports Rspamd.
+      Patch from Andrew Lewis.
+
+JH/15 Bug 670: The spamd_address main option (for the spam= ACL condition)
+      now supports optional time-restrictions, weighting, and priority
+      modifiers per server.  Patch originally by <rommer@active.by>.
+
+JH/16 The spamd_address main option now supports a mixed list of local
+      and remote servers.  Remote servers can be IPv6 addresses, and
+      specify a port-range.
+
+JH/17 Bug 68: The spamd_address main option now supports an optional
+      timeout value per server.
+
+JH/18 Bug 1581: Router and transport options headers_add/remove can
+      now have the list separator specified.
+
+JH/19 Bug 392: spamd_address, and clamd av_scanner, now support retry
+      option values.
+
+JH/20 Bug 1571: Ensure that $tls_in_peerdn is set, when verification fails
+      under OpenSSL.
+
+JH/21 Support for the A6 type of dns record is withdrawn.
+
+JH/22 Bug 608: The result of a QUIT or not-QUIT toplevel ACL now matters
+      rather than the verbs used.
+
+JH/23 Bug 1572: Increase limit on SMTP confirmation message copy size
+      from 255 to 1024 chars.
+
+JH/24 Verification callouts now attempt to use TLS by default.
+
+HS/01 DNSSEC options (dnssec_require_domains, dnssec_request_domains)
+      are generic router options now. The defaults didn't change.
+
+JH/25 Bug 466: Add RFC2322 support for MIME attachment filenames.
+      Original patch from Alexander Shikoff, worked over by JH.
+
+HS/02 Bug 1575: exigrep falls back to autodetection of compressed
+      files if ZCAT_COMMAND is not executable.
+
+JH/26 Bug 1539: Add timeout/retry options on dnsdb lookups.
+
+JH/27 Bug 286: Support SOA lookup in dnsdb lookups.
+
+JH/28 Bug 1588: Do not use the A lookup following an AAAA for setting the FQDN.
+      Normally benign, it bites when the pair was led to by a CNAME;
+      modern usage is to not canonicalize the domain to a CNAME target
+      (and we were inconsistent anyway for A-only vs AAAA+A).
+
+JH/29 Bug 1632: Removed the word "rejected" from line logged for ACL discards.
+
+JH/30 Check the forward DNS lookup for DNSSEC, in addition to the reverse,
+      when evaluating $sender_host_dnssec.
+
+JH/31 Check the HELO verification lookup for DNSSEC, adding new
+      $sender_helo_dnssec variable.
+
+JH/32 Bug 1397: Enable ECDHE on OpenSSL, just the NIST P-256 curve.
+
+JH/33 Bug 1346: Note MAIL cmd seen in -bS batch, to avoid smtp_no_mail log.
+
+JH/34 Bug 1648: Fix a memory leak seen with "mailq" and large queues.
+
+JH/35 Bug 1642: Fix support of $spam_ variables at delivery time.  Was
+      documented as working, but never had.  Support all but $spam_report.
+
+JH/36 Bug 1659: Guard checking of input smtp commands again pseudo-command
+      added for tls authenticator.
+
+HS/03 Add perl_taintmode main config option
+
+
+Exim version 4.85
+-----------------
+
+TL/01 When running the test suite, the README says that variables such as
+      no_msglog_check are global and can be placed anywhere in a specific
+      test's script, however it was observed that placement needed to be near
+      the beginning for it to behave that way. Changed the runtest perl
+      script to read through the entire script once to detect and set these
+      variables, reset to the beginning of the script, and then run through
+      the script parsing/test process like normal.
+
+TL/02 The BSD's have an arc4random API. One of the functions to induce
+      adding randomness was arc4random_stir(), but it has been removed in
+      OpenBSD 5.5. Detect this OpenBSD version and skip calling this
+      function when detected.
+
+JH/01 Expand the EXPERIMENTAL_TPDA feature.  Several different events now
+      cause callback expansion.
+
+TL/03 Bugzilla 1518: Clarify "condition" processing in routers; that
+      syntax errors in an expansion can be treated as a string instead of
+      logging or causing an error, due to the internal use of bool_lax
+      instead of bool when processing it.
+
+JH/02 Add EXPERIMENTAL_DANE, allowing for using the DNS as trust-anchor for
+      server certificates when making smtp deliveries.
+
+JH/03 Support secondary-separator specifier for MX, SRV, TLSA lookups.
+
+JH/04 Add ${sort {list}{condition}{extractor}} expansion item.
+
+TL/04 Bugzilla 1216: Add -M (related messages) option to exigrep.
+
+TL/05 GitHub Issue 18: Adjust logic testing for true/false in redis lookups.
+      Merged patch from Sebastian Wiedenroth.
+
+JH/05 Fix results-pipe from transport process.  Several recipients, combined
+      with certificate use, exposed issues where response data items split
+      over buffer boundaries were not parsed properly.  This eventually
+      resulted in duplicates being sent.  This issue only became common enough
+      to notice due to the introduction of connection certificate information,
+      the item size being so much larger.  Found and fixed by Wolfgang Breyha.
+
+JH/06 Bug 1533: Fix truncation of items in headers_remove lists.  A fixed
+      size buffer was used, resulting in syntax errors when an expansion
+      exceeded it.
+
+JH/07 Add support for directories of certificates when compiled with a GnuTLS
+      version 3.3.6 or later.
+
+JH/08 Rename the TPDA experimental facility to Event Actions.  The #ifdef
+      is EXPERIMENTAL_EVENT, the main-configuration and transport options
+      both become "event_action", the variables become $event_name, $event_data
+      and $event_defer_errno.  There is a new variable $verify_mode, usable in
+      routers, transports and related events.  The tls:cert event is now also
+      raised for inbound connections, if the main configuration event_action
+      option is defined.
+
+TL/06 In test suite, disable OCSP for old versions of openssl which contained
+      early OCSP support, but no stapling (appears to be less than 1.0.0).
+
+JH/09 When compiled with OpenSSL and EXPERIMENTAL_CERTNAMES, the checks on
+      server certificate names available under the smtp transport option
+      "tls_verify_cert_hostname" now do not permit multi-component wildcard
+      matches.
+
+JH/10 Time-related extraction expansions from certificates now use the main
+      option "timezone" setting for output formatting, and are consistent
+      between OpenSSL and GnuTLS compilations.  Bug 1541.
+
+JH/11 Fix a crash in mime ACL when meeting a zero-length, quoted or RFC2047-
+      encoded parameter in the incoming message.  Bug 1558.
+
+JH/12 Bug 1527: Autogrow buffer used in reading spool files.  Since they now
+      include certificate info, eximon was claiming there were spoolfile
+      syntax errors.
+
+JH/13 Bug 1521: Fix ldap lookup for single-attr request, multiple-attr return.
+
+JH/14 Log delivery-related information more consistently, using the sequence
+      "H=<name> [<ip>]" wherever possible.
+
+TL/07 Bug 1547: Omit RFCs from release. Draft and RFCs have licenses which
+      are problematic for Debian distribution, omit them from the release
+      tarball.
+
+JH/15 Updates and fixes to the EXPERIMENTAL_DSN feature.
+
+JH/16 Fix string representation of time values on 64bit time_t architectures.
+      Bug 1561.
+
+JH/17 Fix a null-indirection in certextract expansions when a nondefault
+      output list separator was used.
+
+
+Exim version 4.84
+-----------------
+TL/01 Bugzilla 1506: Re-add a 'return NULL' to silence complaints from static
+      checkers that were complaining about end of non-void function with no
+      return.
+
+JH/01 Bug 1513: Fix parsing of quoted parameter values in MIME headers.
+      This was a regression introduced in 4.83 by another bugfix.
+
+JH/02 Fix broken compilation when EXPERIMENTAL_DSN is enabled.
+
+TL/02 Bug 1509: Fix exipick for enhanced spoolfile specification used when
+      EXPERIMENTAL_DSN is enabled.  Fix from Wolfgang Breyha.
+
+
+Exim version 4.83
+-----------------
+
+TF/01 Correctly close the server side of TLS when forking for delivery.
+
+      When a message was received over SMTP with TLS, Exim failed to clear up
+      the incoming connection properly after forking off the child process to
+      deliver the message. In some situations the subsequent outgoing
+      delivery connection happened to have the same fd number as the incoming
+      connection previously had. Exim would try to use TLS and fail, logging
+      a "Bad file descriptor" error.
+
+TF/02 Portability fix for building lookup modules on Solaris when the xpg4
+      utilities have not been installed.
+
+JH/01 Fix memory-handling in use of acl as a conditional; avoid free of
+      temporary space as the ACL may create new global variables.
+
+TL/01 LDAP support uses per connection or global context settings, depending
+      upon the detected version of the libraries at build time.
+
+TL/02 Experimental Proxy Protocol support: allows a proxied SMTP connection
+      to extract and use the src ip:port in logging and expansions as if it
+      were a direct connection from the outside internet. PPv2 support was
+      updated based on HAProxy spec change in May 2014.
+
+JH/02 Add ${listextract {number}{list}{success}{fail}}.
+
+TL/03 Bugzilla 1433: Fix DMARC SEGV with specific From header contents.
+      Properly escape header and check for NULL return.
+
+PP/01 Continue incomplete 4.82 PP/19 by fixing docs too: use dns_dnssec_ok
+      not dns_use_dnssec.
+
+JH/03 Bugzilla 1157: support log_selector smtp_confirmation for lmtp.
+
+TL/04 Add verify = header_names_ascii check to reject email with non-ASCII
+      characters in header names, implemented as a verify condition.
+      Contributed by Michael Fischer v. Mollard.
+
+TL/05 Rename SPF condition results err_perm and err_temp to standardized
+      results permerror and temperror.  Previous values are deprecated but
+      still accepted.  In a future release, err_perm and err_temp will be
+      completely removed, which will be a backward incompatibility if the
+      ACL tests for either of these two old results. Patch contributed by
+      user bes-internal on the mailing list.
+
+JH/04 Add ${utf8clean:} operator. Contributed by Alex Rau.
+
+JH/05 Bugzilla 305: Log incoming-TLS details on rejects, subject to log
+      selectors, in both main and reject logs.
+
+JH/06 Log outbound-TLS and port details, subject to log selectors, for a
+      failed delivery.
+
+JH/07 Add malware type "sock" for talking to simple daemon.
+
+JH/08 Bugzilla 1371: Add tls_{,try_}verify_hosts to smtp transport.
+
+JH/09 Bugzilla 1431: Support (with limitations) headers_add/headers_remove in
+      routers/transports under cutthrough routing.
+
+JH/10 Bugzilla 1005: ACL "condition =" should accept values which are negative
+      numbers.  Touch up "bool" conditional to keep the same definition.
+
+TL/06 Remove duplicated language in spec file from 4.82 TL/16.
+
+JH/11 Add dnsdb tlsa lookup.  From Todd Lyons.
+
+JH/12 Expand items in router/transport headers_add or headers_remove lists
+      individually rather than the list as a whole.  Bug 1452.
+
+      Required for reasonable handling of multiple headers_ options when
+      they may be empty; requires that headers_remove items with embedded
+      colons must have them doubled (or the list-separator changed).
+
+TL/07 Add new dmarc expansion variable $dmarc_domain_policy to directly
+      view the policy declared in the DMARC record. Currently, $dmarc_status
+      is a combined value of both the record presence and the result of the
+      analysis.
+
+JH/13 Fix handling of $tls_cipher et.al. in (non-verify) transport.  Bug 1455.
+
+JH/14 New options dnssec_request_domains, dnssec_require_domains on the
+      dnslookup router and the smtp transport (applying to the forward
+      lookup).
+
+TL/08 Bugzilla 1453: New LDAP "SERVERS=" option allows admin to override list
+      of ldap servers used for a specific lookup.  Patch provided by Heiko
+      Schlichting.
+
+JH/18 New options dnssec_lax, dnssec_strict on dnsdb lookups.
+      New variable $lookup_dnssec_authenticated for observability.
+
+TL/09 Bugzilla 609: Add -C option to exiqgrep, specify which exim.conf to use.
+      Patch submitted by Lars Timman.
+
+JH/19 EXPERIMENTAL_OCSP support under GnuTLS.  Bug 1459.
+
+TL/10 Bugzilla 1454: New -oMm option to pass message reference to Exim.
+      Requires trusted mode and valid format message id, aborts otherwise.
+      Patch contributed by Heiko Schlichting.
+
+JH/20 New expansion variables tls_(in,out)_(our,peer)cert, and expansion item
+      certextract with support for various fields.  Bug 1358.
+
+JH/21 Observability of OCSP via variables tls_(in,out)_ocsp.  Stapling
+      is requested by default, modifiable by smtp transport option
+      hosts_request_ocsp.
+
+JH/22 Expansion operators ${md5:string} and ${sha1:string} can now
+      operate on certificate variables to give certificate fingerprints
+      Also new ${sha256:cert_variable}.
+
+JH/23 The PRDR feature is moved from being Experimental into the mainline.
+
+TL/11 Bug 1119: fix memory allocation in string_printing2().  Patch from
+      Christian Aistleitner.
+
+JH/24 The OCSP stapling feature is moved from Experimental into the mainline.
+
+TL/12 Bug 1444: Fix improper \r\n sequence handling when writing spool
+      file.  Patch from Wolfgang Breyha.
+
+JH/25 Expand the coverage of the delivery $host and $host_address to
+      client authenticators run in verify callout.  Bug 1476.
+
+JH/26 Port service names are now accepted for tls_on_connect_ports, to
+      align with daemon_smtp_ports.  Bug 72.
+
+TF/03 Fix udpsend. The ip_connectedsocket() function's socket type
+      support and error reporting did not work properly.
+
+TL/13 Bug 1495: Exiqgrep check if -C config file specified on cli exists
+      and is readable.  Patch from Andrew Colin Kissa.
+
+TL/14 Enhance documentation of ${run expansion and how it parses the
+      commandline after expansion, particularly in the case when an
+      unquoted variable expansion results in an empty value.
+
+JH/27 The TLS SNI feature was broken in 4.82.  Fix it.
+
+PP/02 Fix internal collision of T_APL on systems which support RFC3123
+      by renaming away from it.  Addresses GH issue 15, reported by
+      Jasper Wallace.
+
+JH/28 Fix parsing of MIME headers for parameters with quoted semicolons.
+
+TL/15 SECURITY: prevent double expansion in math comparison functions
+      (can expand unsanitized data). Not remotely exploitable.
+      CVE-2014-2972
+
+
+Exim version 4.82
+-----------------
+
+PP/01 Add -bI: framework, and -bI:sieve for querying sieve capabilities.
+
+PP/02 Make -n do something, by making it not do something.
+      When combined with -bP, the name of an option is not output.
+
+PP/03 Added tls_dh_min_bits SMTP transport driver option, only honoured
+      by GnuTLS.
+
+PP/04 First step towards DNSSEC, provide $sender_host_dnssec for
+      $sender_host_name and config options to manage this, and basic check
+      routines.
+
+PP/05 DSCP support for outbound connections and control modifier for inbound.
+
+PP/06 Cyrus SASL: set local and remote IP;port properties for driver.
+      (Only plugin which currently uses this is kerberos4, which nobody should
+      be using, but we should make it available and other future plugins might
+      conceivably use it, even though it would break NAT; stuff *should* be
+      using channel bindings instead).
+
+PP/07 Handle "exim -L <tag>" to indicate to use syslog with tag as the process
+      name; added for Sendmail compatibility; requires admin caller.
+      Handle -G as equivalent to "control = suppress_local_fixups" (we used to
+      just ignore it); requires trusted caller.
+      Also parse but ignore: -Ac -Am -X<logfile>
+      Bugzilla 1117.
+
+TL/01 Bugzilla 1258 - Refactor MAIL FROM optional args processing.
+
+TL/02 Add +smtp_confirmation as a default logging option.
+
+TL/03 Bugzilla 198 - Implement remove_header ACL modifier.
+      Patch by Magnus Holmgren from 2007-02-20.
+
+TL/04 Bugzilla 1281 - Spec typo.
+      Bugzilla 1283 - Spec typo.
+      Bugzilla 1290 - Spec grammar fixes.
+
+TL/05 Bugzilla 1285 - Spec omission, fix docbook errors for spec.txt creation.
+
+TL/06 Add Experimental DMARC support using libopendmarc libraries.
+
+TL/07 Fix an out of order global option causing a segfault.  Reported to dev
+      mailing list by by Dmitry Isaikin.
+
+JH/01 Bugzilla 1201 & 304 - New cutthrough-delivery feature, with TLS support.
+
+JH/02 Support "G" suffix to numbers in ${if comparisons.
+
+PP/08 Handle smtp transport tls_sni option forced-fail for OpenSSL.
+
+NM/01 Bugzilla 1197 - Spec typo
+      Bugzilla 1196 - Spec examples corrections
+
+JH/03 Add expansion operators ${listnamed:name} and ${listcount:string}
+
+PP/09 Add gnutls_allow_auto_pkcs11 option (was originally called
+      gnutls_enable_pkcs11, but renamed to more accurately indicate its
+      function.
+
+PP/10 Let Linux makefile inherit CFLAGS/CFLAGS_DYNAMIC.
+      Pulled from Debian 30_dontoverridecflags.dpatch by Andreas Metzler.
+
+JH/04 Add expansion item ${acl {name}{arg}...}, expansion condition
+      "acl {{name}{arg}...}", and optional args on acl condition
+      "acl = name arg..."
+
+JH/05 Permit multiple router/transport headers_add/remove lines.
+
+JH/06 Add dnsdb pseudo-lookup "a+" to do an "aaaa" + "a" combination.
+
+JH/07 Avoid using a waiting database for a single-message-only transport.
+      Performance patch from Paul Fisher.  Bugzilla 1262.
+
+JH/08 Strip leading/trailing newlines from add_header ACL modifier data.
+      Bugzilla 884.
+
+JH/09 Add $headers_added variable, with content from use of ACL modifier
+      add_header (but not yet added to the message).  Bugzilla 199.
+
+JH/10 Add 8bitmime log_selector, for 8bitmime status on the received line.
+      Pulled from Bugzilla 817 by Wolfgang Breyha.
+
+PP/11 SECURITY: protect DKIM DNS decoding from remote exploit.
+      CVE-2012-5671
+      (nb: this is the same fix as in Exim 4.80.1)
+
+JH/11 Add A= logging on delivery lines, and a client_set_id option on
+      authenticators.
+
+JH/12 Add optional authenticated_sender logging to A= and a log_selector
+      for control.
+
+PP/12 Unbreak server_set_id for NTLM/SPA auth, broken by 4.80 PP/29.
+
+PP/13 Dovecot auth: log better reason to rejectlog if Dovecot did not
+      advertise SMTP AUTH mechanism to us, instead of a generic
+      protocol violation error.  Also, make Exim more robust to bad
+      data from the Dovecot auth socket.
+
+TF/01 Fix ultimate retry timeouts for intermittently deliverable recipients.
+
+      When a queue runner is handling a message, Exim first routes the
+      recipient addresses, during which it prunes them based on the retry
+      hints database. After that it attempts to deliver the message to
+      any remaining recipients. It then updates the hints database using
+      the retry rules.
+
+      So if a recipient address works intermittently, it can get repeatedly
+      deferred at routing time. The retry hints record remains fresh so the
+      address never reaches the final cutoff time.
+
+      This is a fairly common occurrence when a user is bumping up against
+      their storage quota. Exim had some logic in its local delivery code
+      to deal with this. However it did not apply to per-recipient defers
+      in remote deliveries, e.g. over LMTP to a separate IMAP message store.
+
+      This change adds a proper retry rule check during routing so that the
+      final cutoff time is checked against the message's age. We only do
+      this check if there is an address retry record and there is not a
+      domain retry record; this implies that previous attempts to handle
+      the address had the retry_use_local_parts option turned on. We use
+      this as an approximation for the destination being like a local
+      delivery, as in LMTP.
+
+      I suspect this new check makes the old local delivery cutoff check
+      redundant, but I have not verified this so I left the code in place.
+
+TF/02 Correct gecos expansion when From: is a prefix of the username.
+
+      Test 0254 submits a message to Exim with the header
+
+        Resent-From: f
+
+      When I ran the test suite under the user fanf2, Exim expanded
+      the header to contain my full name, whereas it should have added
+      a Resent-Sender: header. It erroneously treats any prefix of the
+      username as equal to the username.
+
+      This change corrects that bug.
+
+GF/01 DCC debug and logging tidyup
+      Error conditions log to paniclog rather than rejectlog.
+      Debug lines prefixed by "DCC: " to remove any ambiguity.
+
+TF/03 Avoid unnecessary rebuilds of lookup-related code.
+
+PP/14 Fix OCSP reinitialisation in SNI handling for Exim/TLS as server.
+      Bug spotted by Jeremy Harris; was flawed since initial commit.
+      Would have resulted in OCSP responses post-SNI triggering an Exim
+      NULL dereference and crash.
+
+JH/13 Add $router_name and $transport_name variables.  Bugzilla 308.
+
+PP/15 Define SIOCGIFCONF_GIVES_ADDR for GNU Hurd.
+      Bug detection, analysis and fix by Samuel Thibault.
+      Bugzilla 1331, Debian bug #698092.
+
+SC/01 Update eximstats to watch out for senders sending 'HELO [IpAddr]'
+
+JH/14 SMTP PRDR (http://www.eric-a-hall.com/specs/draft-hall-prdr-00.txt).
+      Server implementation by Todd Lyons, client by JH.
+      Only enabled when compiled with EXPERIMENTAL_PRDR.  A new
+      config variable "prdr_enable" controls whether the server
+      advertises the facility.  If the client requests PRDR a new
+      acl_data_smtp_prdr ACL is called once for each recipient, after
+      the body content is received and before the acl_smtp_data ACL.
+      The client is controlled by both of: a hosts_try_prdr option
+      on the smtp transport, and the server advertisement.
+      Default client logging of deliveries and rejections involving
+      PRDR are flagged with the string "PRDR".
+
+PP/16 Fix problems caused by timeouts during quit ACLs trying to double
+      fclose().  Diagnosis by Todd Lyons.
+
+PP/17 Update configure.default to handle IPv6 localhost better.
+      Patch by Alain Williams (plus minor tweaks).
+      Bugzilla 880.
+
+PP/18 OpenSSL made graceful with empty tls_verify_certificates setting.
+      This is now consistent with GnuTLS, and is now documented: the
+      previous undocumented portable approach to treating the option as
+      unset was to force an expansion failure.  That still works, and
+      an empty string is now equivalent.
+
+PP/19 Renamed DNSSEC-enabling option to "dns_dnssec_ok", to make it
+      clearer that Exim is using the DO (DNSSEC OK) EDNS0 resolver flag,
+      not performing validation itself.
+
+PP/20 Added force_command boolean option to pipe transport.
+      Patch from Nick Koston, of cPanel Inc.
+
+JH/15 AUTH support on callouts (and hence cutthrough-deliveries).
+      Bugzilla 321, 823.
+
+TF/04 Added udpsend ACL modifier and hexquote expansion operator
+
+PP/21 Fix eximon continuous updating with timestamped log-files.
+      Broken in a format-string cleanup in 4.80, missed when I repaired the
+      other false fix of the same issue.
+      Report and fix from Heiko Schlichting.
+      Bugzilla 1363.
+
+PP/22 Guard LDAP TLS usage against Solaris LDAP variant.
+      Report from Prashanth Katuri.
+
+PP/23 Support safari_ecdhe_ecdsa_bug for openssl_options.
+      It's SecureTransport, so affects any MacOS clients which use the
+      system-integrated TLS libraries, including email clients.
+
+PP/24 Fix segfault from trying to fprintf() to a NULL stdio FILE* if
+      using a MIME ACL for non-SMTP local injection.
+      Report and assistance in diagnosis by Warren Baker.
+
+TL/08 Adjust exiqgrep to be case-insensitive for sender/receiver.
+
+JH/16 Fix comparisons for 64b.  Bugzilla 1385.
+
+TL/09 Add expansion variable $authenticated_fail_id to keep track of
+      last id that failed so it may be referenced in subsequent ACL's.
+
+TL/10 Bugzilla 1375 - Prevent TLS rebinding in ldap. Patch provided by
+      Alexander Miroch.
+
+TL/11 Bugzilla 1382 - Option ldap_require_cert overrides start_tls
+      ldap library initialization, allowing self-signed CA's to be
+      used. Also properly sets require_cert option later in code by
+      using NULL (global ldap config) instead of ldap handle (per
+      session). Bug diagnosis and testing by alxgomz.
+
+TL/12 Enhanced documentation in the ratelimit.pl script provided in
+      the src/util/ subdirectory.
+
+TL/13 Bug 1031 - Imported transport SQL logging patch from Axel Rau
+      renamed to Transport Post Delivery Action by Jeremy Harris, as
+      EXPERIMENTAL_TPDA.
+
+TL/14 Bugzilla 1217 - Redis lookup support has been added. It is only enabled
+      when Exim is compiled with EXPERIMENTAL_REDIS. A new config variable
+      redis_servers = needs to be configured which will be used by the redis
+      lookup.  Patch from Warren Baker, of The Packet Hub.
+
+TL/15 Fix exiqsumm summary for corner case. Patch provided by Richard Hall.
+
+TL/16 Bugzilla 1289 - Clarify host/ip processing when have errors looking up a
+      hostname or reverse DNS when processing a host list. Used suggestions
+      from multiple comments on this bug.
+
+TL/17 Bugzilla 1057 - Multiple clamd TCP targets patch from Mark Zealey.
+
+TL/18 Had previously added a -CONTINUE option to runtest in the test suite.
+      Missed a few lines, added it to make the runtest require no keyboard
+      interaction.
+
+TL/19 Bugzilla 1402 - Test 533 fails if any part of the path to the test suite
+      contains upper case chars. Make router use caseful_local_part.
+
+TL/20 Bugzilla 1400 - Add AVOID_GNUTLS_PKCS11 build option. Allows GnuTLS
+      support when GnuTLS has been built with p11-kit.
+
+
+Exim version 4.80.1
+-------------------
+
+PP/01 SECURITY: protect DKIM DNS decoding from remote exploit.
+      CVE-2012-5671
+      This, or similar/improved, will also be change PP/11 of 4.82.
+
+
+Exim version 4.80
+-----------------
+
+PP/01 Handle short writes when writing local log-files.
+      In practice, only affects FreeBSD (8 onwards).
+      Bugzilla 1053, with thanks to Dmitry Isaikin.
+
+NM/01 Bugzilla 949 - Documentation tweak
+
+NM/02 Bugzilla 1093 - eximstats DATA reject detection regexps
+      improved.
+
+NM/03 Bugzilla 1169 - primary_hostname spelling was incorrect in docs.
+
+PP/02 Implemented gsasl authenticator.
+
+PP/03 Implemented heimdal_gssapi authenticator with "server_keytab" option.
+
+PP/04 Local/Makefile support for (AUTH|LOOKUP)_*_PC=foo to use
+      `pkg-config foo` for cflags/libs.
+
+PP/05 Swapped $auth1/$auth2 for gsasl GSSAPI mechanism, to be more consistent
+      with rest of GSASL and with heimdal_gssapi.
+
+PP/06 Local/Makefile support for USE_(GNUTLS|OPENSSL)_PC=foo to use
+      `pkg-config foo` for cflags/libs for the TLS implementation.
+
+PP/07 New expansion variable $tls_bits; Cyrus SASL server connection
+      properties get this fed in as external SSF.  A number of robustness
+      and debugging improvements to the cyrus_sasl authenticator.
+
+PP/08 cyrus_sasl server now expands the server_realm option.
+
+PP/09 Bugzilla 1214 - Log authentication information in reject log.
+      Patch by Jeremy Harris.
+
+PP/10 Added dbmjz lookup type.
+
+PP/11 Let heimdal_gssapi authenticator take a SASL message without an authzid.
+
+PP/12 MAIL args handles TAB as well as SP, for better interop with
+      non-compliant senders.
+      Analysis and variant patch by Todd Lyons.
+
+NM/04 Bugzilla 1237 - fix cases where printf format usage not indicated
+      Bug report from Lars Müller <lars@samba.org> (via SUSE),
+      Patch from Dirk Mueller <dmueller@suse.com>
+
+PP/13 tls_peerdn now print-escaped for spool files.
+      Observed some $tls_peerdn in wild which contained \n, which resulted
+      in spool file corruption.
+
+PP/14 TLS fixes for OpenSSL: support TLS 1.1 & 1.2; new "openssl_options"
+      values; set SSL_MODE_AUTO_RETRY so that OpenSSL will retry a read
+      or write after TLS renegotiation, which otherwise led to messages
+      "Got SSL error 2".
+
+TK/01 Bugzilla 1239 - fix DKIM verification when signature was not inserted
+      as a tracking header (ie: a signed header comes before the signature).
+      Patch from Wolfgang Breyha.
+
+JH/01 Bugzilla 660 - Multi-valued attributes from ldap now parseable as a
+      comma-sep list; embedded commas doubled.
+
+JH/02 Refactored ACL "verify =" logic to table-driven dispatch.
+
+PP/15 LDAP: Check for errors of TLS initialisation, to give correct
+      diagnostics.
+      Report and patch from Dmitry Banschikov.
+
+PP/16 Removed "dont_insert_empty_fragments" from "openssl_options".
+      Removed SSL_clear() after SSL_new() which led to protocol negotiation
+      failures.  We appear to now support TLS1.1+ with Exim.
+
+PP/17 OpenSSL: new expansion var $tls_sni, which if used in tls_certificate
+      lets Exim select keys and certificates based upon TLS SNI from client.
+      Also option tls_sni on SMTP Transports.  Also clear $tls_bits correctly
+      before an outbound SMTP session.  New log_selector, +tls_sni.
+
+PP/18 Bugzilla 1122 - check localhost_number expansion for failure, avoid
+      NULL dereference.  Report and patch from Alun Jones.
+
+PP/19 DNS resolver init changes for NetBSD compatibility.  (Risk of breakage
+      on less well tested platforms).  Obviates NetBSD pkgsrc patch-ac.
+      Not seeing resolver debug output on NetBSD, but suspect this is a
+      resolver implementation change.
+
+PP/20 Revert part of NM/04, it broke log_path containing %D expansions.
+      Left warnings.  Added "eximon gdb" invocation mode.
+
+PP/21 Defaulting "accept_8bitmime" to true, not false.
+
+PP/22 Added -bw for inetd wait mode support.
+
+PP/23 Added PCRE_CONFIG=yes support to Makefile for using pcre-config to
+      locate the relevant includes and libraries.  Made this the default.
+
+PP/24 Fixed headers_only on smtp transports (was not sending trailing dot).
+      Bugzilla 1246, report and most of solution from Tomasz Kusy.
+
+JH/03 ${eval } now uses 64-bit and supports a "g" suffix (like to "k" and "m").
+      This may cause build issues on older platforms.
+
+PP/25 Revamped GnuTLS support, passing tls_require_ciphers to
+      gnutls_priority_init, ignoring Exim options gnutls_require_kx,
+      gnutls_require_mac & gnutls_require_protocols (no longer supported).
+      Added SNI support via GnuTLS too.
+      Made ${randint:..} supplier available, if using not-too-old GnuTLS.
+
+PP/26 Added EXPERIMENTAL_OCSP for OpenSSL.
+
+PP/27 Applied dnsdb SPF support patch from Janne Snabb.
+      Applied second patch from Janne, implementing suggestion to default
+      multiple-strings-in-record handling to match SPF spec.
+
+JH/04 Added expansion variable $tod_epoch_l for a higher-precision time.
+
+PP/28 Fix DCC dcc_header content corruption (stack memory referenced,
+      read-only, out of scope).
+      Patch from Wolfgang Breyha, report from Stuart Northfield.
+
+PP/29 Fix three issues highlighted by clang analyser static analysis.
+      Only crash-plausible issue would require the Cambridge-specific
+      iplookup router and a misconfiguration.
+      Report from Marcin Mirosław.
+
+PP/30 Another attempt to deal with PCRE_PRERELEASE, this one less buggy.
+
+PP/31 %D in printf continues to cause issues (-Wformat=security), so for
+      now guard some of the printf checks behind WANT_DEEPER_PRINTF_CHECKS.
+      As part of this, removing so much warning spew let me fix some minor
+      real issues in debug logging.
+
+PP/32 GnuTLS was always using default tls_require_ciphers, due to a missing
+      assignment on my part.  Fixed.
+
+PP/33 Added tls_dh_max_bits option, defaulting to current hard-coded limit
+      of NSS, for GnuTLS/NSS interop.  Problem root cause diagnosis by
+      Janne Snabb (who went above and beyond: thank you).
+
+PP/34 Validate tls_require_ciphers on startup, since debugging an invalid
+      string otherwise requires a connection and a bunch more work and it's
+      relatively easy to get wrong.  Should also expose TLS library linkage
+      problems.
+
+PP/35 Pull in <features.h> on Linux, for some portability edge-cases of
+      64-bit ${eval} (JH/03).
+
+PP/36 Define _GNU_SOURCE in exim.h; it's needed for some releases of
+      GNU libc to support some of the 64-bit stuff, should not lead to
+      conflicts.  Defined before os.h is pulled in, so if a given platform
+      needs to override this, it can.
+
+PP/37 Unbreak Cyrus SASL auth: SSF retrieval was incorrect, Exim thought
+      protection layer was required, which is not implemented.
+      Bugzilla 1254, patch from Wolfgang Breyha.
+
+PP/38 Overhaul DH prime handling, supply RFC-specified DH primes as built
+      into Exim, default to IKE id 23 from RFC 5114 (2048 bit).  Make
+      tls_dhparam take prime identifiers.  Also unbreak combination of
+      OpenSSL+DH_params+TLSSNI.
+
+PP/39 Disable SSLv2 by default in OpenSSL support.
+
+
+Exim version 4.77
+-----------------
+
+PP/01 Solaris build fix for Oracle's LDAP libraries.
+      Bugzilla 1109, patch from Stephen Usher.
+
+TF/01 HP/UX build fix: avoid arithmetic on a void pointer.
+
+TK/01 DKIM Verification: Fix relaxed canon for empty headers w/o
+      whitespace trailer
+
+TF/02 Fix a couple more cases where we did not log the error message
+      when unlink() failed. See also change 4.74-TF/03.
+
+TF/03 Make the exiwhat support code safe for signals. Previously Exim might
+      lock up or crash if it happened to be inside a call to libc when it
+      got a SIGUSR1 from exiwhat.
+
+      The SIGUSR1 handler appends the current process status to the process
+      log which is later printed by exiwhat. It used to use the general
+      purpose logging code to do this, but several functions it calls are
+      not safe for signals.
+
+      The new output code in the SIGUSR1 handler is specific to the process
+      log, and simple enough that it's easy to inspect for signal safety.
+      Removing some special cases also simplifies the general logging code.
+      Removing the spurious timestamps from the process log simplifies
+      exiwhat.
+
+TF/04 Improved ratelimit ACL condition.
+
+      The /noupdate option has been deprecated in favour of /readonly which
+      has clearer semantics. The /leaky, /strict, and /readonly update modes
+      are mutually exclusive. The update mode is no longer included in the
+      database key; it just determines when the database is updated. (This
+      means that when you upgrade Exim will forget old rate measurements.)
+
+      Exim now checks that the per_* options are used with an update mode that
+      makes sense for the current ACL. For example, when Exim is processing a
+      message (e.g. acl_smtp_rcpt or acl_smtp_data, etc.) you can specify
+      per_mail/leaky or per_mail/strict; otherwise (e.g. in acl_smtp_helo) you
+      must specify per_mail/readonly. If you omit the update mode it defaults to
+      /leaky where that makes sense (as before) or /readonly where required.
+
+      The /noupdate option is now undocumented but still supported for
+      backwards compatibility. It is equivalent to /readonly except that in
+      ACLs where /readonly is required you may specify /leaky/noupdate or
+      /strict/noupdate which are treated the same as /readonly.
+
+      A useful new feature is the /count= option. This is a generalization
+      of the per_byte option, so that you can measure the throughput of other
+      aggregate values. For example, the per_byte option is now equivalent
+      to per_mail/count=${if >{0}{$message_size} {0} {$message_size} }.
+
+      The per_rcpt option has been generalized using the /count= mechanism
+      (though it's more complicated than the per_byte equivalence). When it is
+      used in acl_smtp_rcpt, the per_rcpt option adds recipients to the
+      measured rate one at a time; if it is used later (e.g. in acl_smtp_data)
+      or in a non-SMTP ACL it adds all the recipients in one go. (The latter
+      /count=$recipients_count behaviour used to work only in non-SMTP ACLs.)
+      Note that using per_rcpt with a non-readonly update mode in more than
+      one ACL will cause the recipients to be double-counted. (The per_mail
+      and per_byte options don't have this problem.)
+
+      The handling of very low rates has changed slightly. If the computed rate
+      is less than the event's count (usually one) then this event is the first
+      after a long gap. In this case the rate is set to the same as this event's
+      count, so that the first message of a spam run is counted properly.
+
+      The major new feature is a mechanism for counting the rate of unique
+      events. The new per_addr option counts the number of different
+      recipients that someone has sent messages to in the last time period. It
+      behaves like per_rcpt if all the recipient addresses are different, but
+      duplicate recipient addresses do not increase the measured rate. Like
+      the /count= option this is a general mechanism, so the per_addr option
+      is equivalent to per_rcpt/unique=$local_part@$domain. You can, for
+      example, measure the rate that a client uses different sender addresses
+      with the options per_mail/unique=$sender_address. There are further
+      details in the main documentation.
+
+TF/05 Removed obsolete $Cambridge$ CVS revision strings.
+
+TF/06 Removed a few PCRE remnants.
+
+TF/07 Automatically extract Exim's version number from tags in the git
+      repository when doing development or release builds.
+
+PP/02 Raise smtp_cmd_buffer_size to 16kB.
+      Bugzilla 879.  Patch from Paul Fisher.
+
+PP/03 Implement SSL-on-connect outbound with protocol=smtps on smtp transport.
+      Heavily based on revision 40f9a89a from Simon Arlott's tree.
+      Bugzilla 97.
+
+PP/04 Use .dylib instead of .so for dynamic library loading on MacOS.
+
+PP/05 Variable $av_failed, true if the AV scanner deferred.
+      Bugzilla 1078.  Patch from John Horne.
+
+PP/06 Stop make process more reliably on build failure.
+      Bugzilla 1087.  Patch from Heiko Schlittermann.
+
+PP/07 Make maildir_use_size_file an _expandable_ boolean.
+      Bugzilla 1089.  Patch from Heiko Schlittermann.
+
+PP/08 Handle ${run} returning more data than OS pipe buffer size.
+      Bugzilla 1131.  Patch from Holger Weiß.
+
+PP/09 Handle IPv6 addresses with SPF.
+      Bugzilla 860.  Patch from Wolfgang Breyha.
+
+PP/10 GnuTLS: support TLS 1.2 & 1.1.
+      Bugzilla 1156.
+      Use gnutls_certificate_verify_peers2() [patch from Andreas Metzler].
+      Bugzilla 1095.
+
+PP/11 match_* no longer expand right-hand-side by default.
+      New compile-time build option, EXPAND_LISTMATCH_RHS.
+      New expansion conditions, "inlist", "inlisti".
+
+PP/12 fix uninitialised greeting string from PP/03 (smtps client support).
+
+PP/13 shell and compiler warnings fixes for RC1-RC4 changes.
+
+PP/14 fix log_write() format string regression from TF/03.
+      Bugzilla 1152.  Patch from Dmitry Isaikin.
+
+
+Exim version 4.76
+-----------------
+
+PP/01 The new ldap_require_cert option would segfault if used.  Fixed.
+
+PP/02 Harmonised TLS library version reporting; only show if debugging.
+      Layout now matches that introduced for other libraries in 4.74 PP/03.
+
+PP/03 New openssl_options items: no_sslv2 no_sslv3 no_ticket no_tlsv1
+
+PP/04 New "dns_use_edns0" global option.
+
+PP/05 Don't segfault on misconfiguration of ref:name exim-user as uid.
+      Bugzilla 1098.
+
+PP/06 Extra paranoia around buffer usage at the STARTTLS transition.
+      nb: Exim is not vulnerable to http://www.kb.cert.org/vuls/id/555316
+
+TK/01 Updated PolarSSL code to 0.14.2.
+      Bugzilla 1097. Patch from Andreas Metzler.
+
+PP/07 Catch divide-by-zero in ${eval:...}.
+      Fixes bugzilla 1102.
+
+PP/08 Condition negation of bool{}/bool_lax{} did not negate.  Fixed.
+      Bugzilla 1104.
+
+TK/02 Bugzilla 1106: CVE-2011-1764 - DKIM log line was subject to a
+      format-string attack -- SECURITY: remote arbitrary code execution.
+
+TK/03 SECURITY - DKIM signature header parsing was double-expanded, second
+      time unintentionally subject to list matching rules, letting the header
+      cause arbitrary Exim lookups (of items which can occur in lists, *not*
+      arbitrary string expansion). This allowed for information disclosure.
+
+PP/09 Fix another SIGFPE (x86) in ${eval:...} expansion, this time related to
+      INT_MIN/-1 -- value coerced to INT_MAX.
+
+
+Exim version 4.75
+-----------------
+
+NM/01 Workaround for PCRE version dependency in version reporting
+      Bugzilla 1073
+
+TF/01 Update valgrind.h and memcheck.h to copies from valgrind-3.6.0.
+      This fixes portability to compilers other than gcc, notably
+      Solaris CC and HP-UX CC. Fixes Bugzilla 1050.
+
+TF/02 Bugzilla 139: Avoid using the += operator in the modular lookup
+      makefiles for portability to HP-UX and POSIX correctness.
+
+PP/01 Permit LOOKUP_foo enabling on the make command-line.
+      Also via indented variable definition in the Makefile.
+      (Debugging by Oliver Heesakkers).
+
+PP/02 Restore caching of spamd results with expanded spamd_address.
+      Patch from author of expandable spamd_address patch, Wolfgang Breyha.
+
+PP/03 Build issue: lookups-Makefile now exports LC_ALL=C
+      Improves build reliability.  Fix from: Frank Elsner
+
+NM/02 Fix wide character breakage in the rfc2047 coding
+      Fixes bug 1064. Patch from Andrey N. Oktyabrski
+
+NM/03 Allow underscore in dnslist lookups
+      Fixes bug 1026. Patch from Graeme Fowler
+
+PP/04 Bugzilla 230: Support TLS-enabled LDAP (in addition to ldaps).
+      Code patches from Adam Ciarcinski of NetBSD.
+
+NM/04 Fixed exiqgrep to cope with mailq missing size issue
+      Fixes bug 943.
+
+PP/05 Bugzilla 1083: when lookup expansion defers, escape the output which
+      is logged, to avoid truncation. Patch from John Horne.
+
+PP/06 Bugzilla 1042: implement freeze_signal on pipe transports.
+      Patch from Jakob Hirsch.
+
+PP/07 Bugzilla 1061: restrict error messages sent over SMTP to not reveal
+      SQL string expansion failure details.
+      Patch from Andrey Oktyabrski.
+
+PP/08 Bugzilla 486: implement %M datestamping in log filenames.
+      Patch from Simon Arlott.
+
+PP/09 New lookups functionality failed to compile on old gcc which rejects
+      extern declarations in function scope.
+      Patch from Oliver Fleischmann
+
+PP/10 Use sig_atomic_t for flags set from signal handlers.
+      Check getgroups() return and improve debugging.
+      Fixed developed for diagnosis in bug 927 (which turned out to be
+      a kernel bug).
+
+PP/11 Bugzilla 1055: Update $message_linecount for maildir_tag.
+      Patch from Mark Zealey.
+
+PP/12 Bugzilla 1056: Improved spamd server selection.
+      Patch from Mark Zealey.
+
+PP/13 Bugzilla 1086: Deal with maildir quota file races.
+      Based on patch from Heiko Schlittermann.
+
+PP/14 Bugzilla 1019: DKIM multiple signature generation fix.
+      Patch from Uwe Doering, sign-off by Michael Haardt.
+
+NM/05 Fix to spam.c to accommodate older gcc versions which dislike
+      variable declaration deep within a block.  Bug and patch from
+      Dennis Davis.
+
+PP/15 lookups-Makefile IRIX compatibility coercion.
+
+PP/16 Make DISABLE_DKIM build knob functional.
+
+NM/06 Bugzilla 968: child_open_uid: restore default SIGPIPE handler
+      Patch by Simon Arlott
+
+TF/03 Fix valgrind.h portability to C89 compilers that do not support
+      variable argument macros. Our copy now differs from upstream.
+
+
+Exim version 4.74
+-----------------
+
+TF/01 Failure to get a lock on a hints database can have serious
+      consequences so log it to the panic log.
+
+TF/02 Log LMTP confirmation messages in the same way as SMTP,
+      controlled using the smtp_confirmation log selector.
+
+TF/03 Include the error message when we fail to unlink a spool file.
+
+DW/01 Bugzilla 139: Support dynamically loaded lookups as modules.
+      With thanks to Steve Haslam, Johannes Berg & Serge Demonchaux
+      for maintaining out-of-tree patches for some time.
+
+PP/01 Bugzilla 139: Documentation and portability issues.
+      Avoid GNU Makefile-isms, let Exim continue to build on BSD.
+      Handle per-OS dynamic-module compilation flags.
+
+PP/02 Let /dev/null have normal permissions.
+      The 4.73 fixes were a little too stringent and complained about the
+      permissions on /dev/null.  Exempt it from some checks.
+      Reported by Andreas M. Kirchwitz.
+
+PP/03 Report version information for many libraries, including
+      Exim version information for dynamically loaded libraries.  Created
+      version.h, now support a version extension string for distributors
+      who patch heavily. Dynamic module ABI change.
+
+PP/04 CVE-2011-0017 - check return value of setuid/setgid. This is a
+      privilege escalation vulnerability whereby the Exim run-time user
+      can cause root to append content of the attacker's choosing to
+      arbitrary files.
+
+PP/05 Bugzilla 1041: merged DCC maintainer's fixes for return code.
+      (Wolfgang Breyha)
+
+PP/06 Bugzilla 1071: fix delivery logging with untrusted macros.
+      If dropping privileges for untrusted macros, we disabled normal logging
+      on the basis that it would fail; for the Exim run-time user, this is not
+      the case, and it resulted in successful deliveries going unlogged.
+      Fixed.  Reported by Andreas Metzler.
+
+
+Exim version 4.73
+-----------------
+
+PP/01 Date: & Message-Id: revert to normally being appended to a message,
+      only prepend for the Resent-* case.  Fixes regression introduced in
+      Exim 4.70 by NM/22 for Bugzilla 607.
+
+PP/02 Include check_rfc2047_length in configure.default because we're seeing
+      increasing numbers of administrators be bitten by this.
+
+JJ/01 Added DISABLE_DKIM and comment to src/EDITME
+
+PP/03 Bugzilla 994: added openssl_options main configuration option.
+
+PP/04 Bugzilla 995: provide better SSL diagnostics on failed reads.
+
+PP/05 Bugzilla 834: provide a permit_coredump option for pipe transports.
+
+PP/06 Adjust NTLM authentication to handle SASL Initial Response.
+
+PP/07 If TLS negotiated an anonymous cipher, we could end up with SSL but
+      without a peer certificate, leading to a segfault because of an
+      assumption that peers always have certificates.  Be a little more
+      paranoid.  Problem reported by Martin Tscholak.
+
+PP/08 Bugzilla 926: switch ClamAV to use the new zINSTREAM API for content
+      filtering; old API available if built with WITH_OLD_CLAMAV_STREAM=yes
+      NB: ClamAV planning to remove STREAM in "middle of 2010".
+      CL also introduces -bmalware, various -d+acl logging additions and
+      more caution in buffer sizes.
+
+PP/09 Implemented reverse_ip expansion operator.
+
+PP/10 Bugzilla 937: provide a "debug" ACL control.
+
+PP/11 Bugzilla 922: Documentation dusting, patch provided by John Horne.
+
+PP/12 Bugzilla 973: Implement --version.
+
+PP/13 Bugzilla 752: Refuse to build/run if Exim user is root/0.
+
+PP/14 Build without WITH_CONTENT_SCAN. Path from Andreas Metzler.
+
+PP/15 Bugzilla 816: support multiple condition rules on Routers.
+
+PP/16 Add bool_lax{} expansion operator and use that for combining multiple
+      condition rules, instead of bool{}.  Make both bool{} and bool_lax{}
+      ignore trailing whitespace.
+
+JJ/02 prevent non-panic DKIM error from being sent to paniclog
+
+JJ/03 added tcp_wrappers_daemon_name to allow host entries other than
+      "exim" to be used
+
+PP/17 Fix malware regression for cmdline scanner introduced in PP/08.
+      Notification from Dr Andrew Aitchison.
+
+PP/18 Change ClamAV response parsing to be more robust and to handle ClamAV's
+      ExtendedDetectionInfo response format.
+      Notification from John Horne.
+
+PP/19 OpenSSL 1.0.0a compatibility const-ness change, should be backwards
+      compatible.
+
+PP/20 Added a CONTRIBUTING file.  Fixed the documentation build to use http:
+      XSL and documented dependency on system catalogs, with examples of how
+      it normally works.
+
+DW/21 Added Valgrind hooks in store.c to help it capture out-of-bounds store
+      access.
+
+DW/22 Bugzilla 1044: CVE-2010-4345 - partial fix: restrict default behaviour
+      of CONFIGURE_OWNER and CONFIGURE_GROUP options to no longer allow a
+      configuration file which is writeable by the Exim user or group.
+
+DW/23 Bugzilla 1044: CVE-2010-4345 - part two: extend checks for writeability
+      of configuration files to cover files specified with the -C option if
+      they are going to be used with root privileges, not just the default
+      configuration file.
+
+DW/24 Bugzilla 1044: CVE-2010-4345 - part three: remove ALT_CONFIG_ROOT_ONLY
+      option (effectively making it always true).
+
+DW/25 Add TRUSTED_CONFIG_PREFIX_FILE option to allow alternative configuration
+      files to be used while preserving root privileges.
+
+DW/26 Set FD_CLOEXEC on SMTP sockets after forking in the daemon, to ensure
+      that rogue child processes cannot use them.
+
+PP/27 Bugzilla 1047: change the default for system_filter_user to be the Exim
+      run-time user, instead of root.
+
+PP/28 Add WHITELIST_D_MACROS option to let some macros be overridden by the
+      Exim run-time user without dropping privileges.
+
+DW/29 Remove use of va_copy() which breaks pre-C99 systems. Duplicate the
+      result string, instead of calling string_vformat() twice with the same
+      arguments.
+
+DW/30 Allow TRUSTED_CONFIG_PREFIX_FILE only for Exim or CONFIGURE_OWNER, not
+      for other users. Others should always drop root privileges if they use
+      -C on the command line, even for a whitelisted configure file.
+
+DW/31 Turn TRUSTED_CONFIG_PREFIX_FILE into TRUSTED_CONFIG_FILE. No prefixes.
+
+NM/01 Fixed bug #1002 - Message loss when using multiple deliveries
+
+
+Exim version 4.72
+-----------------
+
+JJ/01 installed exipick 20100104.1, adding $max_received_linelength,
+      $data_path, and $header_path variables; fixed documentation bugs and
+      typos
+
+JJ/02 installed exipick 20100222.0, added --input-dir and --finput to allow
+      exipick to access non-standard spools, including the "frozen" queue
+      (Finput)
+
+NM/01 Bugzilla 965: Support mysql stored procedures.
+      Patch from Alain Williams
+
+NM/02 Bugzilla 961: Spacing fix (syntax error) on Makefile directives for NetBSD
+
+NM/03 Bugzilla 955: Documentation fix for max_rcpts.
+      Patch from Andreas Metzler
+
+NM/04 Bugzilla 954: Fix for unknown responses from Dovecot authenticator.
+      Patch from Kirill Miazine
+
+NM/05 Bugzilla 671: Added umask to procmail example.
+
+JJ/03 installed exipick 20100323.0, fixing doc bug
+
+NM/06 Bugzilla 988: CVE-2010-2023 - prevent hardlink attack on sticky mail
+      directory.  Notification and patch from Dan Rosenberg.
+
+TK/01 PDKIM: Upgrade PolarSSL files to upstream version 0.12.1.
+
+TK/02 Improve log output when DKIM signing operation fails.
+
+MH/01 Treat the transport option dkim_domain as a colon separated
+      list, not as a single string, and sign the message with each element,
+      omitting multiple occurences of the same signer.
+
+NM/07 Null terminate DKIM strings, Null initialise DKIM variable
+      Bugzilla 985, 986.  Patch by Simon Arlott
+
+NM/08 Bugzilla 967. dnsdb DNS TXT record bug fix (DKIM-related)
+      Patch by Simon Arlott
+
+PP/01 Bugzilla 989: CVE-2010-2024 - work round race condition on
+      MBX locking.  Notification from Dan Rosenberg.
+
+
+Exim version 4.71
+-----------------
+
+TK/01 Bugzilla 912: Fix DKIM segfault on empty headers/body.
+
+NM/01 Bugzilla 913: Documentation fix for gnutls_* options.
+
+NM/02 Bugzilla 722: Documentation for randint.  Better randomness defaults.
+
+NM/03 Bugzilla 847: Enable DNSDB lookup by default.
+
+NM/04 Bugzilla 915: Flag broken perl installation during build.
+
+
+Exim version 4.70
+-----------------
+
+TK/01 Added patch by Johannes Berg that expands the main option
+      "spamd_address" if it starts with a dollar sign.
+
+TK/02 Write list of recipients to X-Envelope-Sender header when building
+      the mbox-format spool file for content scanning (suggested by Jakob
+      Hirsch).
+
+TK/03 Added patch by Wolfgang Breyha that adds experimental DCC
+      (http://www.dcc-servers.net/) support via dccifd. Activated by
+      setting EXPERIMENTAL_DCC=yes in Local/Makefile.
+
+TK/04 Bugzilla 673: Add f-protd malware scanner support. Patch submitted
+      by Mark Daniel Reidel <mr@df.eu>.
+
+NM/01 Bugzilla 657: Embedded PCRE removed from the exim source tree.
+      When building exim an external PCRE library is now needed -
+      PCRE is a system library on the majority of modern systems.
+      See entry on PCRE_LIBS in EDITME file.
+
+NM/02 Bugzilla 646: Removed unwanted C/R in Dovecot authenticator
+      conversation.  Added nologin parameter to request.
+      Patch contributed by Kirill Miazine.
+
+TF/01 Do not log submission mode rewrites if they do not change the address.
+
+TF/02 Bugzilla 662: Fix stack corruption before exec() in daemon.c.
+
+NM/03 Bugzilla 602: exicyclog now handles panic log, and creates empty
+      log files in place.  Contributed by Roberto Lima.
+
+NM/04 Bugzilla 667: Close socket used by dovecot authenticator.
+
+TF/03 Bugzilla 615: When checking the local_parts router precondition
+      after a local_part_suffix or local_part_prefix option, Exim now
+      does not use the address's named list lookup cache, since this
+      contains cached lookups for the whole local part.
+
+NM/05 Bugzilla 521: Integrated SPF Best Guess support contributed by
+      Robert Millan.  Documentation is in experimental-spec.txt.
+
+TF/04 Bugzilla 668: Fix parallel build (make -j).
+
+NM/05.2 Bugzilla 437: Prevent Maildir aux files being created with mode 000.
+
+NM/05.3 Bugzilla 598: Improvement to Dovecot authenticator handling.
+      Patch provided by Jan Srzednicki.
+
+TF/05 Leading white space used to be stripped from $spam_report which
+      wrecked the formatting. Now it is preserved.
+
+TF/06 Save $spam_score, $spam_bar, and $spam_report in spool files, so
+      that they are available at delivery time.
+
+TF/07 Fix the way ${extract is skipped in the untaken branch of a conditional.
+
+TF/08 TLS error reporting now respects the incoming_interface and
+      incoming_port log selectors.
+
+TF/09 Produce a more useful error message if an SMTP transport's hosts
+      setting expands to an empty string.
+
+NM/06 Bugzilla 744: EXPN did not work under TLS.
+      Patch provided by Phil Pennock.
+
+NM/07 Bugzilla 769: Extraneous comma in usage fprintf
+      Patch provided by Richard Godbee.
+
+NM/08 Fixed erroneous documentation references to smtp_notquit_acl to be
+      acl_smtp_notquit, added index entry.
+
+NM/09 Bugzilla 787: Potential buffer overflow in string_format.
+      Patch provided by Eugene Bujak.
+
+NM/10 Bugzilla 770: Problem on some platforms modifying the len parameter to
+      accept(). Patch provided by Maxim Dounin.
+
+NM/11 Bugzilla 749: Preserve old behaviour of blanks comparing equal to zero.
+      Patch provided by Phil Pennock.
+
+NM/12 Bugzilla 497: Correct behaviour of exiwhat when no config exists.
+
+NM/13 Bugzilla 590: Correct handling of Resent-Date headers.
+      Patch provided by Brad "anomie" Jorsch.
+
+NM/14 Bugzilla 622: Added timeout setting to transport filter.
+      Patch provided by Dean Brooks.
+
+TK/05 Add native DKIM support (does not depend on external libraries).
+
+NM/15 Bugzilla 854: Removed code that symlinks to pcre as its no longer useful.
+      Patch provided by Graeme Fowler.
+
+NM/16 Bugzilla 851: Documentation example syntax fix.
+
+NM/17 Changed NOTICE file to remove references to embedded PCRE.
+
+NM/18 Bugzilla 894: Fix issue with very long lines including comments in
+      lsearch.
+
+NM/19 Bugzilla 745: TLS version reporting.
+      Patch provided by Phil Pennock.
+
+NM/20 Bugzilla 167: bool: condition support.
+      Patch provided by Phil Pennock.
+
+NM/21 Bugzilla 665: gnutls_compat_mode to allow compatibility with broken
+      clients. Patch provided by Phil Pennock.
+
+NM/22 Bugzilla 607: prepend (not append) Resent-Message-ID and Resent-Date.
+      Patch provided by Brad "anomie" Jorsch.
+
+NM/23 Bugzilla 687: Fix misparses in eximstats.
+      Patch provided by Heiko Schlittermann.
+
+NM/24 Bugzilla 688: Fix exiwhat to handle log_selector = +pid.
+      Patch provided by Heiko Schlittermann.
+
+NM/25 Bugzilla 727: Use transport mode as default mode for maildirsize file.
+      plus update to original patch.
+
+NM/26 Bugzilla 799: Documentation correction for ratelimit.
+
+NM/27 Bugzilla 802: Improvements to local interface IP addr detection.
+      Patch provided by David Brownlee.
+
+NM/28 Bugzilla 807: Improvements to LMTP delivery logging.
+
+NM/29 Bugzilla 862, 866, 875: Documentation bugfixes.
+
+NM/30 Bugzilla 888: TLS documentation bugfixes.
+
+NM/31 Bugzilla 896: Dovecot buffer overrun fix.
+
+NM/32 Bugzilla 889: Change all instances of "expr" in shell scripts to "expr --"
+      Unlike the original bugzilla I have changed all shell scripts in src tree.
+
+NM/33 Bugzilla 898: Transport filter timeout fix.
+      Patch by Todd Rinaldo.
+
+NM/34 Bugzilla 901: Fix sign/unsigned and UTF mismatches.
+      Patch by Serge Demonchaux.
+
+NM/35 Bugzilla 39: Base64 decode bug fixes.
+      Patch by Jakob Hirsch.
+
+NM/36 Bugzilla 909: Correct connect() call in dcc code.
+
+NM/37 Bugzilla 910: Correct issue with relaxed/simple handling.
+
+NM/38 Bugzilla 908: Removed NetBSD3 support as no longer needed.
+
+NM/39 Bugzilla 911: Fixed MakeLinks build script.
+
+
+Exim version 4.69
+-----------------
+
+TK/01 Add preliminary DKIM support. Currently requires a forked version of
+      ALT-N's libdkim that I have put here:
+      http://duncanthrax.net/exim-experimental/
+
+      Note to Michael Haardt: I had to rename some vars in sieve.c. They
+      were called 'true' and it seems that C99 defines that as a reserved
+      keyword to be used with 'bool' variable types. That means you could
+      not include C99-style headers which use bools without triggering
+      build errors in sieve.c.
+
+NM/01 Bugzilla 592: --help option is handled incorrectly if exim is invoked
+      as mailq or other aliases.  Changed the --help handling significantly
+      to do whats expected.  exim_usage() emits usage/help information.
+
+SC/01 Added the -bylocaldomain option to eximstats.
+
+NM/02 Bugzilla 619: Defended against bad data coming back from gethostbyaddr.
+
+NM/03 Bugzilla 613: Documentation fix for acl_not_smtp.
+
+NM/04 Bugzilla 628: PCRE update to 7.4 (work done by John Hall).
+
+
+Exim version 4.68
+-----------------
+
+PH/01 Another patch from the Sieve maintainer.
+
+PH/02 When an IPv6 address is converted to a string for single-key lookup
+      in an address list (e.g. for an item such as "net24-dbm;/net/works"),
+      dots are used instead of colons so that keys in lsearch files need not
+      contain colons. This was done some time before quoting was made available
+      in lsearch files. However, iplsearch files do require colons in IPv6 keys
+      (notated using the quote facility) so as to distinguish them from IPv4
+      keys. This meant that lookups for IP addresses in host lists did not work
+      for iplsearch lookups.
+
+      This has been fixed by arranging for IPv6 addresses to be expressed with
+      colons if the lookup type is iplsearch. This is not incompatible, because
+      previously such lookups could never work.
+
+      The situation is now rather anomalous, since one *can* have colons in
+      ordinary lsearch keys. However, making the change in all cases is
+      incompatible and would probably break a number of configurations.
+
+TK/01 Change PRVS address formatting scheme to reflect latests BATV draft
+      version.
+
+MH/01 The "spam" ACL condition code contained a sscanf() call with a %s
+      conversion specification without a maximum field width, thereby enabling
+      a rogue spamd server to cause a buffer overflow. While nobody in their
+      right mind would setup Exim to query an untrusted spamd server, an
+      attacker that gains access to a server running spamd could potentially
+      exploit this vulnerability to run arbitrary code as the Exim user.
+
+TK/02 Bugzilla 502: Apply patch to make the SPF-Received: header use
+      $primary_hostname instead of what libspf2 thinks the hosts name is.
+
+MH/02 The dsearch lookup now uses lstat(2) instead of stat(2) to look for
+      a directory entry by the name of the lookup key. Previously, if a
+      symlink pointed to a non-existing file or a file in a directory that
+      Exim lacked permissions to read, a lookup for a key matching that
+      symlink would fail. Now it is enough that a matching directory entry
+      exists, symlink or not. (Bugzilla 503.)
+
+PH/03 The body_linecount and body_zerocount variables are now exported in the
+      local_scan API.
+
+PH/04 Added the $dnslist_matched variable.
+
+PH/05 Unset $tls_cipher and $tls_peerdn before making a connection as a client.
+      This means they are set thereafter only if the connection becomes
+      encrypted.
+
+PH/06 Added the client_condition to authenticators so that some can be skipped
+      by clients under certain conditions.
+
+PH/07 The error message for a badly-placed control=no_multiline_responses left
+      "_responses" off the end of the name.
+
+PH/08 Added -Mvc to output a copy of a message in RFC 2822 format.
+
+PH/09 Tidied the code for creating ratelimiting keys, creating them explicitly
+      (without spaces) instead of just copying the configuration text.
+
+PH/10 Added the /noupdate option to the ratelimit ACL condition.
+
+PH/11 Added $max_received_linelength.
+
+PH/12 Added +ignore_defer and +include_defer to host lists.
+
+PH/13 Installed PCRE version 7.2. This needed some changes because of the new
+      way in which PCRE > 7.0 is built.
+
+PH/14 Implemented queue_only_load_latch.
+
+PH/15 Removed an incorrect (int) cast when reading the value of SIZE in a
+      MAIL command. The effect was to mangle the value on 64-bit systems.
+
+PH/16 Another patch from the Sieve maintainer.
+
+PH/17 Added the NOTQUIT ACL, based on a patch from Ted Cooper.
+
+PH/18 If a system quota error occurred while trying to create the file for
+      a maildir delivery, the message "Mailbox is full" was not appended to the
+      bounce if the delivery eventually timed out. Change 4.67/27 below applied
+      only to a quota excession during the actual writing of the file.
+
+PH/19 It seems that peer DN values may contain newlines (and other non-printing
+      characters?) which causes problems in log lines. The DN values are now
+      passed through string_printing() before being added to log lines.
+
+PH/20 Added the "servers=" facility to MySQL and PostgreSQL lookups. (Oracle
+      and InterBase are left for another time.)
+
+PH/21 Added message_body_newlines option.
+
+PH/22 Guard against possible overflow in moan_check_errorcopy().
+
+PH/23 POSIX allows open() to be a macro; guard against that.
+
+PH/24 If the recipient of an error message contained an @ in the local part
+      (suitably quoted, of course), incorrect values were put in $domain and
+      $local_part during the evaluation of errors_copy.
+
+
+Exim version 4.67
+-----------------
+
+MH/01 Fix for bug #448, segfault in Dovecot authenticator when interface_address
+      is unset (happens when testing with -bh and -oMi isn't used). Thanks to
+      Jan Srzednicki.
+
+PH/01 Added a new log selector smtp_no_mail, to log SMTP sessions that do not
+      issue a MAIL command.
+
+PH/02 In an ACL statement such as
+
+        deny dnslists = X!=127.0.0.2 : X=127.0.0.2
+
+      if a client was not listed at all, or was listed with a value other than
+      127.0.0.2, in the X list, but was listed with 127.0.0.2 in the Y list,
+      the condition was not true (as it should be), so access was not denied.
+      The bug was that the ! inversion was incorrectly passed on to the second
+      item. This has been fixed.
+
+PH/03 Added additional dnslists conditions == and =& which are different from
+      = and & when the dns lookup returns more than one IP address.
+
+PH/04 Added gnutls_require_{kx,mac,protocols} to give more control over the
+      cipher suites used by GnuTLS. These options are ignored by OpenSSL.
+
+PH/05 After discussion on the list, added a compile time option ENABLE_DISABLE_
+      FSYNC, which compiles an option called disable_fsync that allows for
+      bypassing fsync(). The documentation is heavily laced with warnings.
+
+SC/01 Updated eximstats to collate all SpamAssassin rejects into one bucket.
+
+PH/06 Some tidies to the infrastructure of the Test Suite that is concerned
+      with the auxiliary C programs that it uses: (1) Arrange for BIND_8_COMPAT
+      to be defined when compiling on OSX (Darwin); (2) Tidies to the Makefile,
+      including adding "make clean"; (3) Added -fPIC when compiling the test
+      dynamically loaded module, to get rid of a warning.
+
+MH/02 Fix for bug #451, causing paniclog entries to be written if a bounce
+      message fails, move_frozen_messages = true and ignore_bounce_errors_after
+      = 0s. The bug is otherwise harmless.
+
+PH/07 There was a bug in the dovecot authenticator such that the value of
+      $auth1 could be overwritten, and so not correctly preserved, after a
+      successful authentication. This usually meant that the value preserved by
+      the server_setid option was incorrect.
+
+PH/08 Added $smtp_count_at_connection_start, deliberately with a long name.
+
+PH/09 Installed PCRE release 7.0.
+
+PH/10 The acl_not_smtp_start ACL was, contrary to the documentation, not being
+      run for batched SMTP input. It is now run at the start of every message
+      in the batch. While fixing this I discovered that the process information
+      (output by running exiwhat) was not always getting set for -bs and -bS
+      input. This is fixed, and it now also says "batched" for BSMTP.
+
+PH/11 Added control=no_pipelining.
+
+PH/12 Added $sending_ip_address and $sending_port (mostly Magnus Holmgren's
+      patch, slightly modified), and move the expansion of helo_data till after
+      the connection is made in the smtp transport (so it can use these
+      values).
+
+PH/13 Added ${rfc2047d: to decoded RFC 2047 strings.
+
+PH/14 Added log_selector = +pid.
+
+PH/15 Flush SMTP output before delaying, unless control=no_delay_flush is set.
+
+PH/16 Add ${if forany and ${if forall.
+
+PH/17 Added dsn_from option to vary the From: line in DSNs.
+
+PH/18 Flush SMTP output before performing a callout, unless control =
+      no_callout_flush is set.
+
+PH/19 Change 4.64/PH/36 introduced a bug: when address_retry_include_sender
+      was true (the default) a successful delivery failed to delete the retry
+      item, thus causing premature timeout of the address. The bug is now
+      fixed.
+
+PH/20 Added hosts_avoid_pipelining to the smtp transport.
+
+PH/21 Long custom messages for fakedefer and fakereject are now split up
+      into multiline responses in the same way that messages for "deny" and
+      other ACL rejections are.
+
+PH/22 Applied Jori Hamalainen's speed-up changes and typo fixes to exigrep,
+      with slight modification.
+
+PH/23 Applied sieve patches from the maintainer "tracking the latest notify
+      draft, changing the syntax and factoring some duplicate code".
+
+PH/24 When the log selector "outgoing_port" was set, the port was shown as -1
+      for deliveries of the second and subsequent messages over the same SMTP
+      connection.
+
+PH/25 Applied Magnus Holmgren's patch for ${addresses, ${map, ${filter, and
+      ${reduce, with only minor "tidies".
+
+SC/02 Applied Daniel Tiefnig's patch to improve the '($parent) =' pattern match.
+
+PH/26 Added a "continue" ACL modifier that does nothing, for the benefit of its
+      expansion side effects.
+
+PH/27 When a message times out after an over-quota error from an Exim-imposed
+      quota, the bounce message says "mailbox is full". This message was not
+      being given when it was a system quota that was exceeded. It now should
+      be the same.
+
+MH/03 Made $recipients available in local_scan(). local_scan() already has
+      better access to the recipient list through recipients_list[], but
+      $recipients can be useful in postmaster-provided expansion strings.
+
+PH/28 The $smtp_command and $smtp_command_argument variables were not correct
+      in the case of a MAIL command with additional options following the
+      address, for example: MAIL FROM:<foo@bar> SIZE=1234. The option settings
+      were accidentally chopped off.
+
+PH/29 SMTP synchronization checks are implemented when a command is read -
+      there is a check that no more input is waiting when there shouldn't be
+      any. However, for some commands, a delay in an ACL can mean that it is
+      some time before the response is written. In this time, more input might
+      arrive, invalidly. So now there are extra checks after an ACL has run for
+      HELO/EHLO and after the predata ACL, and likewise for MAIL and RCPT when
+      pipelining has not been advertised.
+
+PH/30 MH's patch to allow iscntrl() characters to be list separators.
+
+PH/31 Unlike :fail:, a custom message specified with :defer: was not being
+      returned in the SMTP response when smtp_return_error_details was false.
+      This has been fixed.
+
+PH/32 Change the Dovecot authenticator to use read() and write() on the socket
+      instead of the C I/O that was originally supplied, because problems were
+      reported on Solaris.
+
+PH/33 Compile failed with OpenSSL 0.9.8e. This was due to a coding error in
+      Exim which did not show up earlier: it was assuming that a call to
+      SSL_CTX_set_info_callback() might give an error value. In fact, there is
+      no error. In previous releases of OpenSSL, SSL_CTX_set_info_callback()
+      was a macro that became an assignment, so it seemed to work. This has
+      changed to a proper function call with a void return, hence the compile
+      error. Exim's code has been fixed.
+
+PH/34 Change HDA_SIZE in oracle.c from 256 to 512. This is needed for 64-bit
+      cpus.
+
+PH/35 Applied a patch from the Sieve maintainer which fixes a bug in "notify".
+
+PH/36 Applied John Jetmore's patch to add -v functionality to exigrep.
+
+PH/37 If a message is not accepted after it has had an id assigned (e.g.
+      because it turns out to be too big or there is a timeout) there is no
+      "Completed" line in the log. When some messages of this type were
+      selected by exigrep, they were listed as "not completed". Others were
+      picked up by some special patterns. I have improved the selection
+      criteria to be more general.
+
+PH/38 The host_find_failed option in the manualroute router can now be set
+      to "ignore", to completely ignore a host whose IP address cannot be
+      found. If all hosts are ignored, the behaviour is controlled by the new
+      host_all_ignored option.
+
+PH/39 In a list of hosts for manualroute, if one item (either because of multi-
+      homing or because of multiple MX records with /mx) generated more than
+      one IP address, and the following item turned out to be the local host,
+      all the secondary addresses of the first item were incorrectly removed
+      from the list, along with the local host and any following hosts (which
+      is what is supposed to happen).
+
+PH/40 When Exim receives a message, it writes the login name, uid, and gid of
+      whoever called Exim into the -H file. In the case of the daemon it was
+      behaving confusingly. When first started, it used values for whoever
+      started the daemon, but after a SIGHUP it used the Exim user (because it
+      calls itself on a restart). I have changed the code so that it now always
+      uses the Exim user.
+
+PH/41 (Following a suggestion from Tony Finch) If all the RCPT commands in a
+      message are rejected with the same error (e.g. no authentication or bad
+      sender address), and a DATA command is nevertheless sent (as can happen
+      with PIPELINING or a stupid MUA), the error message that was given to the
+      RCPT commands is included in the rejection of the DATA command. This is
+      intended to be helpful for MUAs that show only the final error to their
+      users.
+
+PH/42 Another patch from the Sieve maintainer.
+
+SC/02 Eximstats - Differentiate between permanent and temporary rejects.
+      Eximstats - Fixed some broken HTML links and added missing column headers
+                  (Jez Hancock).
+      Eximstats - Fixed Grand Total Summary Domains, Edomains, and Email
+                  columns for Rejects, Temp Rejects, Ham, and Spam rows.
+
+SC/03 Eximstats - V1.58 Fix to get <> and blackhole to show in edomain tables.
+
+PH/43 Yet another patch from the Sieve maintainer.
+
+PH/44 I found a way to check for a TCP/IP connection going away before sending
+      the response to the final '.' that terminates a message, but only in the
+      case where the client has not sent further data following the '.'
+      (unfortunately, this is allowed). However, in many cases there won't be
+      any further data because there won't be any more messages to send. A call
+      to select() can be used: if it shows that the input is "ready", there is
+      either input waiting, or the socket has been closed. An attempt to read
+      the next input character can distinguish the two cases. Previously, Exim
+      would have sent an OK response which the client would never have see.
+      This could lead to message repetition. This fix should cure that, at
+      least in a lot of common cases.
+
+PH/45 Do not advertise STARTTLS in response to HELP unless it would be
+      advertised in response to EHLO.
+
+
+Exim version 4.66
+-----------------
+
+PH/01 Two more bugs that were introduced by 4.64/PH/07, in addition to the one
+      fixed by 4.65/MH/01 (is this a record?) are fixed:
+
+      (i)  An empty string was always treated as zero by the numeric comparison
+           operators. This behaviour has been restored.
+
+      (ii) It is documented that the numeric comparison operators always treat
+           their arguments as decimal numbers. This was broken in that numbers
+           starting with 0 were being interpreted as octal.
+
+      While fixing these problems I realized that there was another issue that
+      hadn't been noticed. Values of message_size_limit (both the global option
+      and the transport option) were treated as octal if they started with 0.
+      The documentation was vague. These values are now always treated as
+      decimal, and I will make that clear in the documentation.
+
+
+Exim version 4.65
+-----------------
+
+TK/01 Disable default definition of HAVE_LINUX_SENDFILE. Clashes with
+      Linux large file support (_FILE_OFFSET_BITS=64) on older glibc
+      versions. (#438)
+
+MH/01 Don't check that the operands of numeric comparison operators are
+      integers when their expansion is in "skipping" mode (fixes bug
+      introduced by 4.64-PH/07).
+
+PH/01 If a system filter or a router generates more than SHRT_MAX (32767)
+      child addresses, Exim now panics and dies. Previously, because the count
+      is held in a short int, deliveries were likely to be lost. As such a
+      large number of recipients for a single message is ridiculous
+      (performance will be very, very poor), I have chosen to impose a limit
+      rather than extend the field.
+
+
+Exim version 4.64
+-----------------
+
+TK/01 Bugzilla #401. Fix DK spooling code so that it can overwrite a
+      leftover -K file (the existence of which was triggered by #402).
+      While we were at it, introduced process PID as part of the -K
+      filename. This should rule out race conditions when creating
+      these files.
+
+TK/02 Bugzilla #402. Apply patch from Simon Arlott, speeding up DK signing
+      processing considerably. Previous code took too long for large mails,
+      triggering a timeout which in turn triggers #401.
+
+TK/03 Introduced HAVE_LINUX_SENDFILE to os.h-Linux. Currently only used
+      in the DK code in transports.c. sendfile() is not really portable,
+      hence the _LINUX specificness.
+
+TF/01 In the add_headers option to the mail command in an Exim filter,
+      there was a bug that Exim would claim a syntax error in any
+      header after the first one which had an odd number of characters
+      in the field name.
+
+PH/01 If a server that rejects MAIL FROM:<> was the target of a sender
+      callout verification, Exim cached a "reject" for the entire domain. This
+      is correct for most verifications, but it is not correct for a recipient
+      verification with use_sender or use_postmaster set, because in that case
+      the callout does not use MAIL FROM:<>. Exim now distinguishes the special
+      case of MAIL FROM:<> rejection from other early rejections (e.g.
+      rejection of HELO). When verifying a recipient using a non-null MAIL
+      address, the cache is ignored if it shows MAIL FROM:<> rejection.
+      Whatever the result of the callout, the value of the domain cache is
+      left unchanged (for any other kind of callout, getting as far as trying
+      RCPT means that the domain itself is ok).
+
+PH/02 Tidied a number of unused variable and signed/unsigned warnings that
+      gcc 4.1.1 threw up.
+
+PH/03 On Solaris, an unexpectedly close socket (dropped connection) can
+      manifest itself as EPIPE rather than ECONNECT. When tidying away a
+      session, the daemon ignores ECONNECT errors and logs others; it now
+      ignores EPIPE as well.
+
+PH/04 Applied Nico Erfurth's refactoring patch to tidy up mime.c
+      (quoted-printable decoding).
+
+PH/05 Applied Nico Erfurth's refactoring patch to tidy up spool_mbox.c, and
+      later the small subsequent patch to fix an introduced bug.
+
+PH/06 Installed the latest Cygwin Makefile from the Cygwin maintainer.
+
+PH/07 There was no check for overflow in expansions such as ${if >{1}{4096M}}.
+
+PH/08 An error is now given if message_size_limit is specified negative.
+
+PH/09 Applied and tidied up Jakob Hirsch's patch for allowing ACL variables
+      to be given (somewhat) arbitrary names.
+
+JJ/01 exipick 20060919.0, allow for arbitrary acl_ variables introduced
+      in 4.64-PH/09.
+
+JJ/02 exipick 20060919.0, --show-vars args can now be regular expressions,
+      miscellaneous code fixes
+
+PH/10 Added the log_reject_target ACL modifier to specify where to log
+      rejections.
+
+PH/11 Callouts were setting the name used for EHLO/HELO from $smtp_active_
+      hostname. This is wrong, because it relates to the incoming message (and
+      probably the interface on which it is arriving) and not to the outgoing
+      callout (which could be using a different interface). This has been
+      changed to use the value of the helo_data option from the smtp transport
+      instead - this is what is used when a message is actually being sent. If
+      there is no remote transport (possible with a router that sets up host
+      addresses), $smtp_active_hostname is used.
+
+PH/12 Installed Andrey Panin's patch to add a dovecot authenticator. Various
+      tweaks were necessary in order to get it to work (see also 21 below):
+      (a) The code assumed that strncpy() returns a negative number on buffer
+          overflow, which isn't the case. Replaced with Exim's string_format()
+          function.
+      (b) There were several signed/unsigned issues. I just did the minimum
+          hacking in of casts. There is scope for a larger refactoring.
+      (c) The code used strcasecmp() which is not a standard C function.
+          Replaced with Exim's strcmpic() function.
+      (d) The code set only $1; it now sets $auth1 as well.
+      (e) A simple test gave the error "authentication client didn't specify
+          service in request". It would seem that Dovecot has changed its
+          interface. Fortunately there's a specification; I followed it and
+          changed what the client sends and it appears to be working now.
+
+PH/13 Added $message_headers_raw to provide the headers without RFC 2047
+      decoding.
+
+PH/14 Corrected misleading output from -bv when -v was also used. Suppose the
+      address A is aliased to B and C, where B exists and C does not. Without
+      -v the output is "A verified" because verification stops after a
+      successful redirection if more than one address is generated. However,
+      with -v the child addresses are also verified. Exim was outputting "A
+      failed to verify" and then showing the successful verification for C,
+      with its parentage. It now outputs "B failed to verify", showing B's
+      parentage before showing the successful verification of C.
+
+PH/15 Applied Michael Deutschmann's patch to allow DNS black list processing to
+      look up a TXT record in a specific list after matching in a combined
+      list.
+
+PH/16 It seems that the options setting for the resolver (RES_DEFNAMES and
+      RES_DNSRCH) can affect the behaviour of gethostbyname() and friends when
+      they consult the DNS. I had assumed they would set it the way they
+      wanted; and indeed my experiments on Linux seem to show that in some
+      cases they do (I could influence IPv6 lookups but not IPv4 lookups).
+      To be on the safe side, however, I have now made the interface to
+      host_find_byname() similar to host_find_bydns(), with an argument
+      containing the DNS resolver options. The host_find_byname() function now
+      sets these options at its start, just as host_find_bydns() does. The smtp
+      transport options dns_qualify_single and dns_search_parents are passed to
+      host_find_byname() when gethostbyname=TRUE in this transport. Other uses
+      of host_find_byname() use the default settings of RES_DEFNAMES
+      (qualify_single) but not RES_DNSRCH (search_parents).
+
+PH/17 Applied (a modified version of) Nico Erfurth's patch to make
+      spool_read_header() do less string testing, by means of a preliminary
+      switch on the second character of optional "-foo" lines. (This is
+      overdue, caused by the large number of possibilities that now exist.
+      Originally there were few.) While I was there, I also converted the
+      str(n)cmp tests so they don't re-test the leading "-" and the first
+      character, in the hope this might squeeze out yet more improvement.
+
+PH/18 Two problems with "group" syntax in header lines when verifying: (1) The
+      flag allowing group syntax was set by the header_syntax check but not
+      turned off, possible causing trouble later; (2) The flag was not being
+      set at all for the header_verify test, causing "group"-style headers to
+      be rejected. I have now set it in this case, and also caused header_
+      verify to ignore an empty address taken from a group. While doing this, I
+      came across some other cases where the code for allowing group syntax
+      while scanning a header line wasn't quite right (mostly, not resetting
+      the flag correctly in the right place). These bugs could have caused
+      trouble for malformed header lines. I hope it is now all correct.
+
+PH/19 The functions {pwcheck,saslauthd}_verify_password() are always called
+      with the "reply" argument non-NULL. The code, however (which originally
+      came from elsewhere) had *some* tests for NULL when it wrote to *reply,
+      but it didn't always do it. This confused somebody who was copying the
+      code for some other use. I have removed all the tests.
+
+PH/20 It was discovered that the GnuTLS code had support for RSA_EXPORT, a
+      feature that was used to support insecure browsers during the U.S. crypto
+      embargo. It requires special client support, and Exim is probably the
+      only MTA that supported it -- and would never use it because real RSA is
+      always available. This code has been removed, because it had the bad
+      effect of slowing Exim down by computing (never used) parameters for the
+      RSA_EXPORT functionality.
+
+PH/21 On the advice of Timo Sirainen, added a check to the dovecot
+      authenticator to fail if there's a tab character in the incoming data
+      (there should never be unless someone is messing about, as it's supposed
+      to be base64-encoded). Also added, on Timo's advice, the "secured" option
+      if the connection is using TLS or if the remote IP is the same as the
+      local IP, and the "valid-client-cert option" if a client certificate has
+      been verified.
+
+PH/22 As suggested by Dennis Davis, added a server_condition option to *all*
+      authenticators. This can be used for authorization after authentication
+      succeeds. (In the case of plaintext, it servers for both authentication
+      and authorization.)
+
+PH/23 Testing for tls_required and lost_connection in a retry rule didn't work
+      if any retry times were supplied.
+
+PH/24 Exim crashed if verify=helo was activated during an incoming -bs
+      connection, where there is no client IP address to check. In this
+      situation, the verify now always succeeds.
+
+PH/25 Applied John Jetmore's -Mset patch.
+
+PH/26 Added -bem to be like -Mset, but loading a message from a file.
+
+PH/27 In a string expansion for a processed (not raw) header when multiple
+      headers of the same name were present, leading whitespace was being
+      removed from all of them, but trailing whitespace was being removed only
+      from the last one. Now trailing whitespace is removed from each header
+      before concatenation. Completely empty headers in a concatenation (as
+      before) are ignored.
+
+PH/28 Fixed bug in backwards-compatibility feature of PH/09 (thanks to John
+      Jetmore). It would have mis-read ACL variables from pre-4.61 spool files.
+
+PH/29 [Removed. This was a change that I later backed out, and forgot to
+      correct the ChangeLog entry (that I had efficiently created) before
+      committing the later change.]
+
+PH/30 Exim was sometimes attempting to deliver messages that had suffered
+      address errors (4xx response to RCPT) over the same connection as other
+      messages routed to the same hosts. Such deliveries are always "forced",
+      so retry times are not inspected. This resulted in far too many retries
+      for the affected addresses. The effect occurred only when there were more
+      hosts than the hosts_max_try setting in the smtp transport when it had
+      the 4xx errors. Those hosts that it had tried were not added to the list
+      of hosts for which the message was waiting, so if all were tried, there
+      was no problem. Two fixes have been applied:
+
+      (i)  If there are any address or message errors in an SMTP delivery, none
+           of the hosts (tried or untried) are now added to the list of hosts
+           for which the message is waiting, so the message should not be a
+           candidate for sending over the same connection that was used for a
+           successful delivery of some other message. This seems entirely
+           reasonable: after all the message is NOT "waiting for some host".
+           This is so "obvious" that I'm not sure why it wasn't done
+           previously. Hope I haven't missed anything, but it can't do any
+           harm, as the worst effect is to miss an optimization.
+
+      (ii) If, despite (i), such a delivery is accidentally attempted, the
+           routing retry time is respected, so at least it doesn't keep
+           hammering the server.
+
+PH/31 Installed Andrew Findlay's patch to close the writing end of the socket
+      in ${readsocket because some servers need this prod.
+
+PH/32 Added some extra debug output when updating a wait-xxx database.
+
+PH/33 The hint "could be header name not terminated by colon", which has been
+      given for certain expansion errors for a long time, was not being given
+      for the ${if def:h_colon_omitted{...  case.
+
+PH/34 The spec says: "With one important exception, whenever a domain list is
+      being scanned, $domain contains the subject domain." There was at least
+      one case where this was not true.
+
+PH/35 The error "getsockname() failed: connection reset by peer" was being
+      written to the panic log as well as the main log, but it isn't really
+      panic-worthy as it just means the connection died rather early on. I have
+      removed the panic log writing for the ECONNRESET error when getsockname()
+      fails.
+
+PH/36 After a 4xx response to a RCPT error, that address was delayed (in queue
+      runs only) independently of the message's sender address. This meant
+      that, if the 4xx error was in fact related to the sender, a different
+      message to the same recipient with a different sender could confuse
+      things. In particular, this can happen when sending to a greylisting
+      server, but other circumstances could also provoke similar problems.
+      I have changed the default so that the retry time for these errors is now
+      based a combination of the sender and recipient addresses. This change
+      can be overridden by setting address_retry_include_sender=false in the
+      smtp transport.
+
+PH/37 For LMTP over TCP/IP (the smtp transport), error responses from the
+      remote server are returned as part of bounce messages. This was not
+      happening for LMTP over a pipe (the lmtp transport), but now it is the
+      same for both kinds of LMTP.
+
+PH/38 Despite being documented as not happening, Exim was rewriting addresses
+      in header lines that were in fact CNAMEs. This is no longer the case.
+
+PH/39 If -R or -S was given with -q<time>, the effect of -R or -S was ignored,
+      and queue runs started by the daemon processed all messages. This has
+      been fixed so that -R and -S can now usefully be given with -q<time>.
+
+PH/40 Import PCRE release 6.7 (fixes some bugs).
+
+PH/41 Add bitwise logical operations to eval (courtesy Brad Jorsch).
+
+PH/42 Give an error if -q is specified more than once.
+
+PH/43 Renamed the variables $interface_address and $interface_port as
+      $received_ip_address and $received_port, to make it clear that these
+      values apply to message reception, and not to the outgoing interface when
+      a message is delivered. (The old names remain recognized, of course.)
+
+PH/44 There was no timeout on the connect() call when using a Unix domain
+      socket in the ${readsocket expansion. There now is.
+
+PH/45 Applied a modified version of Brad Jorsch's patch to allow "message" to
+      be meaningful with "accept".
+
+SC/01 Eximstats V1.43
+     Bug fix for V1.42 with -h0 specified. Spotted by Chris Lear.
+
+SC/02 Eximstats V1.44
+      Use a glob alias rather than an array ref in the generated
+      parser. This improves both readability and performance.
+
+SC/03 Eximstats V1.45 (Marco Gaiarin / Steve Campbell)
+      Collect SpamAssassin and rejection statistics.
+      Don't display local sender or destination tables unless
+      there is data to show.
+      Added average volumes into the top table text output.
+
+SC/04 Eximstats V1.46
+      Collect data on the number of addresses (recipients)
+      as well as the number of messages.
+
+SC/05 Eximstats V1.47
+      Added 'Message too big' to the list of mail rejection
+      reasons (thanks to Marco Gaiarin).
+
+SC/06 Eximstats V1.48
+      Mainlog lines which have GMT offsets and are too short to
+      have a flag are now skipped.
+
+SC/07 Eximstats V1.49 (Alain Williams)
+      Added the -emptyok flag.
+
+SC/08 Eximstats V1.50
+      Fixes for obtaining the IP address from reject messages.
+
+JJ/03 exipick.20061117.2, made header handling as similar to exim as possible
+      (added [br]h_ prefixes, implemented RFC2047 decoding.  Fixed
+      whitespace changes from 4.64-PH/27
+
+JJ/04 exipick.20061117.2, fixed format and added $message_headers_raw to
+      match 4.64-PH/13
+
+JJ/05 exipick.20061117.2, bug fixes (error out sooner when invalid criteria
+      are found, allow negative numbers in numeric criteria)
+
+JJ/06 exipick.20061117.2, added new $message_body_missing variable
+
+JJ/07 exipick.20061117.2, added $received_ip_address and $received_port
+      to match changes made in 4.64-PH/43
+
+PH/46 Applied Jori Hamalainen's patch to add features to exiqsumm.
+
+PH/47 Put in an explicit test for a DNS lookup of an address record where the
+      "domain" is actually an IP address, and force a failure. This locks out
+      those revolvers/nameservers that support "A-for-A" lookups, in
+      contravention of the specifications.
+
+PH/48 When a host name was looked up from an IP address, and the subsequent
+      forward lookup of the name timed out, the host name was left in
+      $sender_host_name, contrary to the specification.
+
+PH/49 Although default lookup types such as lsearch* or cdb*@ have always been
+      restricted to single-key lookups, Exim was not diagnosing an error if
+      * or *@ was used with a query-style lookup.
+
+PH/50 Increased the value of DH_BITS in tls-gnu.c from 768 to 1024.
+
+MH/01 local_scan ABI version incremented to 1.1. It should have been updated
+      long ago, but noone interested enough thought of it. Let's just say that
+      the "1.1" means that there are some new functions that weren't there at
+      some point in the past.
+
+PH/51 Error processing for expansion failure of helo_data from an smtp
+      transport during callout processing was broken.
+
+PH/52 Applied John Jetmore's patch to allow tls-on-connect and STARTTLS to be
+      tested/used via the -bh/-bhc/-bs options.
+
+PH/53 Added missing "#include <time.h>" to pcre/pcretest.c (this was a PCRE
+      bug, fixed in subsequent PCRE releases).
+
+PH/54 Applied Robert Bannocks' patch to avoid a problem with references that
+      arises when using the Solaris LDAP libraries (but not with OpenLDAP).
+
+PH/55 Check for a ridiculously long file name in exim_dbmbuild.
+
+
+Exim version 4.63
+-----------------
+
+SC/01 Use a glob alias rather than an array ref in eximstats generated
+      parser. This improves both readability and performance.
+
+SC/02 Collect SpamAssassin and rejection statistics in eximstats.
+      Don't display local sender or destination tables in eximstats unless
+      there is data to show.
+      Added average volumes into the eximstats top table text output.
+
+SC/03 Collect data on the number of addresses (recipients) as well
+      as the number of messages in eximstats.
+
+TF/01 Correct an error in the documentation for the redirect router. Exim
+      does (usually) call initgroups() when daemonizing.
+
+TF/02 Call initgroups() when dropping privilege in exim.c, so that Exim runs
+      with consistent privilege compared to when running as a daemon.
+
+TF/03 Note in the spec that $authenticated_id is not set for local
+      submissions from trusted users.
+
+TF/04 The ratelimit per_rcpt option now works correctly in acl_not_smtp.
+      Thanks to Dean Brooks <dean@iglou.com> for the patch.
+
+TF/05 Make it easier to get SMTP authentication and TLS/SSL support working
+      by adding some example configuration directives to the default
+      configuration file. A little bit of work is required to uncomment the
+      directives and define how usernames and passwords are checked, but
+      there is now a framework to start from.
+
+PH/01 Added #define LDAP_DEPRECATED 1 to ldap.c because some of the "old"
+      functions that Exim currently uses aren't defined in ldap.h for OpenLDAP
+      without this. I don't know how relevant this is to other LDAP libraries.
+
+PH/02 Add the verb name to the "unknown ACL verb" error.
+
+PH/03 Magnus Holmgren's patch for filter_prepend_home.
+
+PH/03 Fixed Bugzilla #101: macro definition between ACLs doesn't work.
+
+PH/04 Applied Magnus Holmgren's patch to fix Bugzilla #98: transport's home
+      directory not expanded when it should be if an expanded home directory
+      was set for the address (which is overridden by the transport).
+
+PH/05 Applied Alex Kiernan's patch to fix Bugzilla #99: a problem with
+      libradius.
+
+PH/06 Added acl_not_smtp_start, based on Johannes Berg's patch, and set the
+      bit to forbid control=suppress_local_fixups in the acl_not_smtp ACL,
+      because it is too late at that time, and has no effect.
+
+PH/07 Changed ${quote_pgsql to quote ' as '' instead of \' because of a
+      security issue with \' (bugzilla #107). I could not use the
+      PQescapeStringConn() function, because it needs a PGconn value as one of
+      its arguments.
+
+PH/08 When testing addresses using -bt, indicate those final addresses that
+      are duplicates that would not cause an additional delivery. At least one
+      person was confused, thinking that -bt output corresponded to deliveries.
+      (Suppressing duplicates isn't a good idea as you lose the information
+      about possibly different redirections that led to the duplicates.)
+
+PH/09 Applied patch from Erik to use select() instead of poll() in spam.c on
+      systems where poll() doesn't work, in particular OS X.
+
+PH/10 Added more information to debugging output for retry time not reached.
+
+PH/11 Applied patch from Arkadiusz Miskiewicz to apply a timeout to read
+      operations in malware.c.
+
+PH/12 Applied patch from Magnus Holmgren to include the "h" tag in Domain Keys
+      signatures.
+
+PH/13 If write_rejectlog was set false when logging was sent to syslog with
+      syslog_duplication set false, log lines that would normally be written
+      both the the main log and to the reject log were not written to syslog at
+      all.
+
+PH/14 In the default configuration, change the use of "message" in ACL warn
+      statements to "add_header".
+
+PH/15 Diagnose a filter syntax error for "seen", "unseen", or "noerror" if not
+      not followed by a command (e.g. "seen endif").
+
+PH/16 Recognize SMTP codes at the start of "message" in ACLs and after :fail:
+      and :defer: in a redirect router. Add forbid_smtp_code to suppress the
+      latter.
+
+PH/17 Added extra conditions to the default value of delay_warning_condition
+      so that it is now:
+
+        ${if or { \
+            { !eq{$h_list-id:$h_list-post:$h_list-subscribe:}{} } \
+            { match{$h_precedence:}{(?i)bulk|list|junk} } \
+            { match{$h_auto-submitted:}{(?i)auto-generated|auto-replied} } \
+            }{no}{yes}}
+
+      The Auto-Submitted: and various List- headers are standardised, whereas I
+      don't think Precedence: ever was.
+
+PH/18 Refactored debugging code in route_finduser() to show more information,
+      in particular, the error code if getpwnam() issues one.
+
+PH/19 Added PQsetClientEncoding(conn, "SQL_ASCII") to the pgsql code module.
+      This is apparently needed in addition to the PH/07 change above to avoid
+      any possible encoding problems.
+
+PH/20 Perl can change the locale. Exim was resetting it after a ${perl call,
+      but not after initializing Perl.
+
+PH/21 Added a call to PQsetNoticeProcessor() to catch pgsql "notices" and
+      output them only if debugging. By default they are written stderr,
+      apparently, which is not desirable.
+
+PH/22 Added Alain Williams' LDAP patch to support setting REFERRALS=off on
+      queries.
+
+JJ/01 exipick: added --reverse (and -R synonym), --random, --size, --sort and
+      --not options
+
+JJ/02 exipick: rewrote --help documentation to hopefully make more clear.
+
+PH/23 Made -oMaa and -oMt work with -bh and -bs to pretend the connection is
+      authenticated or an ident call has been made. Suppress the default
+      values for $authenticated_id and $authenticated_sender (but permit -oMai
+      and -oMas) when testing with -bh.
+
+PH/24 Re-jigged the order of the tests in the default configuration so that the
+      tests for valid domains and recipients precede the DNS black list and CSA
+      tests, on the grounds that those ones are more expensive.
+
+PH/25 Exim was not testing for a space following SMTP commands such as EHLO
+      that require one. Thus, EHLORHUBARB was interpreted as a valid command.
+      This bug exists in every version of Exim that I still have, right back to
+      0.12.
+
+PH/26 (n)wildlsearch lookups are documented as being done case-insensitively.
+      However, an attempt to turn on case-sensitivity in a regex key by
+      including (?-i) didn't work because the subject string was already
+      lowercased, and the effects were non-intuitive. It turns out that a
+      one-line patch can be used to allow (?-i) to work as expected.
+
+
+Exim version 4.62
+-----------------
+
+TF/01 Fix the add_header change below (4.61 PH/55) which had a bug that (amongst
+      other effects) broke the use of negated acl sub-conditions.
+
+PH/01 ${readsocket now supports Internet domain sockets (modified John Jetmore
+      patch).
+
+PH/02 When tcp-wrappers is called from Exim, it returns only "deny" or "allow".
+      "Deny" causes Exim to reject the incoming connection with a 554 error.
+      Unfortunately, if there is a major crisis, such as a disk failure,
+      tcp-wrappers gives "deny", whereas what one would like would be some
+      kind of temporary error. A kludge has been added to help with this.
+      Before calling hosts_ctl(), errno is set zero. If the result is "deny", a
+      554 error is used if errno is still zero or contains ENOENT (which occurs
+      if either of the /etc/hosts.{allow,deny} files is missing). Otherwise, a
+      451 error is used.
+
+PH/03 Add -lutil to the default FreeBSD LIBS setting.
+
+PH/04 Change PH/19 for 4.61 was too wide. It should not be applied to host
+      errors. Otherwise a message that provokes a temporary error (when other
+      messages do not) can cause a whole host to time out.
+
+PH/05 Batch deliveries by appendfile and pipe transports did not work when the
+      addresses were routed directly to files or pipes from a redirect router.
+      File deliveries just didn't batch; pipe deliveries might have suffered
+      odd errors.
+
+PH/06 A failure to get a lock for a hints database would erroneously always say
+      "Failed to get write lock", even when it was really a read lock.
+
+PH/07 The appendfile transport was creating MBX lock files with a fixed mode
+      of 0600. This has been changed to use the value of the lockfile_mode
+      option (which defaults to 0600).
+
+PH/08 Applied small patch from the Sieve maintainer.
+
+PH/09 If maildir_quota_directory_regex was set to exclude (say) the .Trash
+      folder from quota calculations, a direct delivery into this folder messed
+      up the contents of the maildirsize file. This was because the regex was
+      used only to exclude .Trash (or whatever) when the size of the mailbox
+      was calculated. There was no check that a delivery was happening into an
+      excluded directory. This bug has been fixed by ignoring all quota
+      processing for deliveries into excluded directories.
+
+PH/10 Added the maildirfolder_create_regex option to appendfile.
+
+
+Exim version 4.61
+-----------------
+
+PH/01 The code for finding all the local interface addresses on a FreeBSD
+      system running IPv6 was broken. This may well have applied to all BSD
+      systems, as well as to others that have similar system calls. The broken
+      code found IPv4 interfaces correctly, but gave incorrect values for the
+      IPv6 interfaces. In particular, ::1 was not found. The effect in Exim was
+      that it would not match correctly against @[] and not recognize the IPv6
+      addresses as local.
+
+PH/02 The ipliteral router was not recognizing addresses of the form user@
+      [ipv6:....] because it didn't know about the "ipv6:" prefix.
+
+PH/03 Added disable_ipv6.
+
+PH/04 Changed $reply_address to use the raw form of the headers instead of the
+      decoded form, because it is most often used to construct To: headers
+      lines in autoreplies, and the decoded form may well be syntactically
+      invalid. However, $reply_address has leading white space removed, and all
+      newlines turned into spaces so that the autoreply transport does not
+      grumble.
+
+PH/05 If group was specified without a user on a router, and no group or user
+      was specified on a transport, the group from the router was ignored.
+
+PH/06 Increased the number of ACL variables to 20 of each type, and arranged
+      for visible compile-time settings that can be used to change these
+      numbers, for those that want even more. Backwards compatibility with old
+      spool files has been maintained. However, going back to a previous Exim
+      release will lost any variables that are in spool files.
+
+PH/07 Two small changes when running in the test harness: increase delay when
+      passing a TCP/IP connection to a new process, in case the original
+      process has to generate a bounce, and remove special handling of
+      127.0.0.2 (sic), which is no longer necessary.
+
+PH/08 Changed debug output of dbfn_open() flags from numbers to names, so as to
+      be the same on different OS.
+
+PH/09 Moved a debug statement in filter processing to avoid a race problem when
+      testing.
+
+JJ/01 exipick: fixed bug where -b (brief) output option showed "Vars:"
+      whether --show-vars was specified or not
+
+JJ/02 exipick: Added support for new ACL variable spool format introduced
+      in 4.61-PH/06
+
+PH/10 Fixed another bug related to PH/04 above: if an incoming message had a
+      syntactically invalid From: or Reply-to: line, and a filter used this to
+      generate an autoreply, and therefore failed to obtain an address for the
+      autoreply, Exim could try to deliver to a non-existent relative file
+      name, causing unrelated and misleading errors. What now happens is that
+      it logs this as a hard delivery error, but does not attempt to create a
+      bounce message.
+
+PH/11 The exinext utility has a -C option for testing purposes, but although
+      the given file was scanned by exinext itself; it wasn't being passed on
+      when Exim was called.
+
+PH/12 In the smtp transport, treat an explicit ECONNRESET error the same as
+      an end-of-file indication when reading a command response.
+
+PH/13 Domain literals for IPv6 were not recognized unless IPv6 support was
+      compiled. In many other places in Exim, IPv6 addresses are always
+      recognized, so I have changed this. It also means that IPv4 domain
+      literals of the form [IPV4:n.n.n.n] are now always recognized.
+
+PH/14 When a uid/gid is specified for the queryprogram router, it cannot be
+      used if the router is not running as root, for example, when verifying at
+      ACL time, or when using -bh. The debugging output from this situation was
+      non-existent - all you got was a failure to exec. I have made two
+      changes:
+
+      (a) Failures to set uid/gid, the current directory, or a process leader
+          in a subprocess such as that created by queryprogram now generate
+          suitable debugging output when -d is set.
+
+      (b) The queryprogram router detects when it is not running as root,
+          outputs suitable debugging information if -d is set, and then runs
+          the subprocess without attempting to change uid/gid.
+
+PH/15 Minor change to Makefile for building test_host (undocumented testing
+      feature).
+
+PH/16 As discussed on the list in Nov/Dec: Exim no longer looks at the
+      additional section of a DNS packet that returns MX or SRV records.
+      Instead, it always explicitly searches for A/AAAA records. This avoids
+      major problems that occur when a DNS server includes only records of one
+      type (A or AAAA) in an MX/SRV packet. A byproduct of this change has
+      fixed another bug: if SRV records were looked up and the corresponding
+      address records were *not* found in the additional section, the port
+      values from the SRV records were lost.
+
+PH/17 If a delivery to a pipe, file, or autoreply was deferred, Exim was not
+      using the correct key (the original address) when searching the retry
+      rules in order to find which one to use for generating the retry hint.
+
+PH/18 If quota_warn_message contains a From: header, Exim now refrains from
+      adding the default one. Similarly, if it contains a Reply-To: header, the
+      errors_reply_to option, if set, is not used.
+
+PH/19 When calculating a retry time, Exim used to measure the "time since
+      failure" by looking at the "first failed" field in the retry record. Now
+      it does not use this if it is later than than the arrival time of the
+      message. Instead it uses the arrival time. This makes for better
+      behaviour in cases where some deliveries succeed, thus re-setting the
+      "first failed" field. An example is a quota failure for a huge message
+      when small messages continue to be delivered. Without this change, the
+      "time since failure" will always be short, possible causing more frequent
+      delivery attempts for the huge message than are intended.
+      [Note: This change was subsequently modified - see PH/04 for 4.62.]
+
+PH/20 Added $auth1, $auth2, $auth3 to contain authentication data (as well as
+      $1, $2, $3) because the numerical variables can be reset during some
+      expansion items (e.g. "match"), thereby losing the authentication data.
+
+PH/21 Make -bV show the size of off_t variables so that the test suite can
+      decide whether to run tests for quotas > 2G.
+
+PH/22 Test the values given for quota, quota_filecount, quota_warn_threshold,
+      mailbox_size, and mailbox_filecount in the appendfile transport. If a
+      filecount value is greater than 2G or if a quota value is greater than 2G
+      on a system where the size of off_t is not greater than 4, a panic error
+      is given.
+
+PH/23 When a malformed item such as 1.2.3/24 appears in a host list, it can
+      never match. The debug and -bh output now contains an explicit error
+      message indicating a malformed IPv4 address or mask.
+
+PH/24 An host item such as 1.2.3.4/abc was being treated as the IP address
+      1.2.3.4 without a mask. Now it is not recognized as an IP address, and
+      PH/23 above applies.
+
+PH/25 Do not write to syslog when running in the test harness. The only
+      occasion when this arises is a failure to open the main or panic logs
+      (for which there is an explicit test).
+
+PH/26 Added the /no_tell option to "control=freeze".
+
+PH/27 If a host name lookup failed very early in a connection, for example, if
+      the IP address matched host_lookup and the reverse lookup yielded a name
+      that did not have a forward lookup, an error message of the form "no IP
+      address found for host xxx.xxx.xxx (during SMTP connection from NULL)"
+      could be logged. Now it outputs the IP address instead of "NULL".
+
+PH/28 An enabling patch from MH: add new function child_open_exim2() which
+      allows the sender and the authenticated sender to be set when
+      submitting a message from within Exim. Since child_open_exim() is
+      documented for local_scan(), the new function should be too.
+
+PH/29 In GnuTLS, a forced expansion failure for tls_privatekey was not being
+      ignored. In both GnuTLS and OpenSSL, an expansion of tls_privatekey that
+      results in an empty string is now treated as unset.
+
+PH/30 Fix eximon buffer overflow bug (Bugzilla #73).
+
+PH/31 Added sender_verify_fail logging option.
+
+PH/32 In November 2003, the code in Exim that added an empty Bcc: header when
+      needed by RFC 822 but not by RFC 2822 was commented out. I have now
+      tidied the source and removed it altogether.
+
+PH/33 When a queue run was abandoned because the load average was too high, a
+      log line was always written; now it is written only if the queue_run log
+      selector is set. In addition, the log line for abandonment now contains
+      information about the queue run such as the pid. This is always present
+      in "start" and "stop" lines but was omitted from the "abandon" line.
+
+PH/34 Omit spaces between a header name and the colon in the error message that
+      is given when verify = headers_syntax fails (if there are lots of them,
+      the message gets confusing).
+
+PH/35 Change the default for dns_check_names_pattern to allow slashes within
+      names, as there are now some PTR records that contain slashes. This check
+      is only to protect against broken name servers that fall over on strange
+      characters, so the fact that it applies to all lookups doesn't matter.
+
+PH/36 Now that the new test suite is complete, we can remove some of the
+      special code in Exim that was needed for the old test suite. For example,
+      sorting DNS records because real resolvers return them in an arbitrary
+      order. The new test suite's fake resolver always returns records in the
+      same order.
+
+PH/37 When running in the test harness, use -odi for submitted messages (e.g.
+      bounces) except when queue_only is set, to avoid logging races between
+      the different processes.
+
+PH/38 Panic-die if .include specifies a non-absolute path.
+
+PH/39 A tweak to the "H" retry rule from its user.
+
+JJ/03 exipick: Removed parentheses from 'next' and 'last' calls that specified
+      a label.  They prevented compilation on older perls.
+
+JJ/04 exipick: Refactored code to prevent implicit split to @_ which caused
+      a warning to be raised on newish perls.
+
+JJ/05 exipick: Fixed bug where -bpc always showed a count of all messages
+      on queue.  Changes to match documented behaviour of showing count of
+      messages matching specified criteria.
+
+PH/40 Changed the default ident timeout from 30s to 5s.
+
+PH/41 Added support for the use of login_cap features, on those BSD systems
+      that have them, for controlling the resources used by pipe deliveries.
+
+PH/42 The content-scanning code uses fopen() to create files in which to put
+      message data. Previously it was not paying any attention to the mode of
+      the files. Exim runs with umask(0) because the rest of the code creates
+      files with open(), and sets the required mode explicitly. Thus, these
+      files were ending up world-writeable. This was not a big issue, because,
+      being within the spool directory, they were not world-accessible. I have
+      created a function called modefopen, which takes an additional mode
+      argument. It sets umask(777), creates the file, chmods it to the required
+      mode, then resets the umask. All the relevant calls to fopen() in the
+      content scanning code have been changed to use this function.
+
+PH/43 If retry_interval_max is set greater than 24 hours, it is quietly reset
+      to 24 hours. This avoids potential overflow problems when processing G
+      and H retry rules. I suspect nobody ever tinkers with this value.
+
+PH/44 Added STRIP_COMMAND=/usr/bin/strip to the FreeBSD Makefile.
+
+PH/45 When the plaintext authenticator is running as a client, the server's
+      challenges are checked to ensure they are valid base64 strings. By
+      default, the authentication attempt is cancelled if an invalid string is
+      received. Setting client_ignore_invalid_base64 true ignores these errors.
+      The decoded challenge strings are now placed in $auth1, $auth2, etc. as
+      they are received. Thus, the responses can be made to depend on the
+      challenges. If an invalid string is ignored, an empty string is placed in
+      the variable.
+
+PH/46 Messages that are created by the autoreply transport now contains a
+      References: header, in accordance with RFCs 2822 and 3834.
+
+PH/47 Added authenticated_sender_force to the smtp transport.
+
+PH/48 The ${prvs expansion was broken on systems where time_t was long long.
+
+PH/49 Installed latest patch from the Sieve maintainer.
+
+PH/50 When an Exim quota was set without a file count quota, and mailbox_size
+      was also set, the appendfile transport was unnecessarily scanning a
+      directory of message files (e.g. for maildir delivery) to find the count
+      of files (along with the size), even though it did not need this
+      information. It now does the scan only if it needs to find either the
+      size of the count of files.
+
+PH/51 Added ${time_eval: to convert Exim time strings into seconds.
+
+PH/52 Two bugs concerned with error handling when the smtp transport is
+      used in LMTP mode:
+
+      (i) Exim was not creating retry information for temporary errors given
+      for individual recipients after the DATA command when the smtp transport
+      was used in LMTP mode. This meant that they could be retried too
+      frequently, and not timed out correctly.
+
+      (ii) Exim was setting the flag that allows error details to be returned
+      for LMTP errors on RCPT commands, but not for LMTP errors for individual
+      recipients that were returned after the DATA command.
+
+PH/53 This is related to PH/52, but is more general: for any failing address,
+      when detailed error information was permitted to be returned to the
+      sender, but the error was temporary, then after the final timeout, only
+      "retry timeout exceeded" was returned. Now it returns the full error as
+      well as "retry timeout exceeded".
+
+PH/54 Added control=allow_auth_unadvertised, as it seems there are clients that
+      do this, and (what is worse) MTAs that accept it.
+
+PH/55 Added the add_header modified to ACLs. The use of "message" with "warn"
+      will now be deprecated.
+
+PH/56 New os.c-cygwin from the Cygwin maintainer.
+
+JJ/06 exipick: added --unsorted option to allow unsorted output in all output
+      formats (previously only available in exim formats via -bpr, -bpru,
+      and -bpra.  Now also available in native and exiqgrep formats)
+
+JJ/07 exipick: added --freeze and --thaw options to allow faster interaction
+      with very large, slow to parse queues
+
+JJ/08 exipick: added ! as generic prefix to negate any criteria format
+
+JJ/09 exipick: miscellaneous performance enhancements (~24% improvements)
+
+PH/57 Tidies in SMTP dialogue display in debug output: (i) It was not showing
+      responses to authentication challenges, though it was showing the
+      challenges; (ii) I've removed the CR characters from the debug output for
+      SMTP output lines.
+
+PH/58 Allow for the insertion of a newline as well as a space when a string
+      is turned into more than one encoded-word during RFC 2047 encoding. The
+      Sieve code now uses this.
+
+PH/59 Added the following errors that can be detected in retry rules: mail_4xx,
+      data_4xx, lost_connection, tls_required.
+
+PH/60 When a VRFY deferred or FAILED, the log message rather than the user
+      message was being sent as an SMTP response.
+
+PH/61 Add -l and -k options to exicyclog.
+
+PH/62 When verifying, if an address was redirected to one new address, so that
+      verification continued, and the new address failed or deferred after
+      having set something in $address_data, the value of $address_data was not
+      passed back to the ACL. This was different to the case when no
+      redirection occurred. The value is now passed back in both cases.
+
+PH/63 Changed the macro HAVE_LOGIN_CAP (see PH/41 for this release above) to
+      HAVE_SETCLASSRESOURCES because there are different APIs in use that all
+      use login_cap.h, so on its own it isn't the distinguishing feature. The
+      new name refers directly to the setclassresources() function.
+
+PH/65 Added configuration files for NetBSD3.
+
+PH/66 Updated OS/Makefile-HP-UX for gcc 4.1.0 with HP-UX 11.
+
+PH/67 Fixed minor infelicity in the sorting of addresses to ensure that IPv6
+      is preferred over IPv4.
+
+PH/68 The bounce_return_message and bounce_return_body options were not being
+      honoured for bounces generated during the reception of non-SMTP messages.
+      In particular, this applied to messages rejected by the ACL. This bug has
+      been fixed. However, if bounce_return_message is true and bounce_return_
+      body is false, the headers that are returned for a non-SMTP message
+      include only those that have been read before the error was detected.
+      (In the case of an ACL rejection, they have all been read.)
+
+PH/69 The HTML version of the specification is now built in a directory called
+      spec_html instead of spec.html, because the latter looks like a path with
+      a MIME-type, and this confuses some software.
+
+PH/70 Catch two compiler warnings in sieve.c.
+
+PH/71 Fixed an obscure and subtle bug (thanks Alexander & Matthias). The
+      function verify_get_ident() calls ip_connect() to connect a socket, but
+      if the "connect()" function timed out, ip_connect() used to close the
+      socket. However, verify_get_ident() also closes the socket later, and in
+      between Exim writes to the log, which may get opened at this point. When
+      the socket was closed in ip_connect(), the log could get the same file
+      descriptor number as the socket. This naturally causes chaos. The fix is
+      not to close the socket in ip_connect(); the socket should be closed by
+      the function that creates it. There was only one place in the code where
+      this was missing, in the iplookup router, which I don't think anybody now
+      uses, but I've fixed it anyway.
+
+PH/72 Make dns_again_means_nonexist apply to lookups using gethostbyname() as
+      well as to direct DNS lookups. Otherwise the handling of names in host
+      lists is inconsistent and therefore confusing.
+
+
+Exim version 4.60
+-----------------
+
+PH/01 Two changes to the default runtime configuration:
+
+      (1) Move the checks for relay_from_hosts and authenticated clients from
+          after to before the (commented out) DNS black list checks.
+
+      (2) Add control=submission to the relay_from_hosts and authenticated
+          clients checks, on the grounds that messages accepted by these
+          statements are most likely to be submissions.
+
+PH/02 Several tidies to the handling of ${prvs and ${prvscheck:
+
+      (1) Generate an error if the third argument for the ${prvs expansion is
+          not a single digit.
+
+      (2) Treat a missing third argument of ${prvscheck as if it were an empty
+          string.
+
+      (3) Reset the variables that are obtained from the first argument of
+          ${prvscheck and used in the second argument before leaving the code,
+          because their memory is reclaimed, so using them afterwards may do
+          silly things.
+
+      (4) Tidy up the code for expanding the arguments of ${prvscheck one by
+          one (it's much easier than Tom thought :-).
+
+      (5) Because of (4), we can now allow for the use of $prvscheck_result
+          inside the third argument.
+
+PH/03 For some reason, the default setting of PATH when running a command from
+      a pipe transport was just "/usr/bin". I have changed it to
+      "/bin:/usr/bin".
+
+PH/04 SUPPORT_TRANSLATE_IP_ADDRESS and MOVE_FROZEN_MESSAGES did not cause
+      anything to be listed in the output from -bV.
+
+PH/05 When a filter generated an autoreply, the entire To: header line was
+      quoted in the delivery log line, like this:
+
+        => >A.N.Other <ano@some.domain> <original@ddress> ...
+
+      This has been changed so that it extracts the operative address. There
+      may be more than one such address. If so, they are comma-separated, like
+      this:
+
+        => >ano@some.domain,ona@other.domain <original@ddress> ...
+
+PH/06 When a client host used a correct literal IP address in a HELO or EHLO
+      command, (for example, EHLO [1.2.3.4]) and the client's IP address was
+      not being looked up in the rDNS to get a host name, Exim was showing the
+      IP address twice in Received: lines, even though the IP addresses were
+      identical. For example:
+
+        Received: from [1.2.3.4] (helo=[1.2.3.4])
+
+      However, if the real host name was known, it was omitting the HELO data
+      if it matched the actual IP address. This has been tidied up so that it
+      doesn't show the same IP address twice.
+
+PH/07 When both +timestamp and +memory debugging was on, the value given by
+      $tod_xxx expansions could be wrong, because the tod_stamp() function was
+      called by the debug printing, thereby overwriting the timestamp buffer.
+      Debugging no longer uses the tod_stamp() function when +timestamp is set.
+
+PH/08 When the original message was included in an autoreply transport, it
+      always said "this is a copy of the message, including all the headers",
+      even if body_only or headers_only was set. It now gives an appropriate
+      message.
+
+PH/09 Applied a patch from the Sieve maintainer which:
+
+      o  fixes some comments
+      o  adds the (disabled) notify extension core
+      o  adds some debug output for the result of if/elsif tests
+      o  points to the current vacation draft in the documentation
+         and documents the missing references header update
+
+      and most important:
+
+      o  fixes a bug in processing the envelope test (when testing
+         multiple envelope elements, the last element determined the
+         result)
+
+PH/10 Exim was violating RFC 3834 ("Recommendations for Automatic Responses to
+      Electronic Mail") by including:
+
+        Auto-submitted: auto-generated
+
+      in the messages that it generates (bounce messages and others, such as
+      warnings). In the case of bounce messages for non-SMTP messages, there was
+      also a typo: it was using "Auto_submitted" (underscore instead of
+      hyphen). Since every message generated by Exim is necessarily in response
+      to another message, thes have all been changed to:
+
+        Auto-Submitted: auto-replied
+
+      in accordance with these statements in the RFC:
+
+        The auto-replied keyword:
+
+        -  SHOULD be used on messages sent in direct response to another
+           message by an automatic process,
+
+        -  MUST NOT be used on manually-generated messages,
+
+        -  MAY be used on Delivery Status Notifications (DSNs) and Message
+           Disposition Notifications (MDNs),
+
+        -  MUST NOT be used on messages generated by automatic or periodic
+           processes, except for messages which are automatic responses to
+           other messages.
+
+PH/11 Added "${if def:sender_address {(envelope-from <$sender_address>)\n\t}}"
+      to the default Received: header definition.
+
+PH/12 Added log selector acl_warn_skipped (default on).
+
+PH/13 After a successful wildlsearch lookup, discard the values of numeric
+      variables because (a) they are in the wrong storage pool and (b) even if
+      they were copied, it wouldn't work properly because of the caching.
+
+PH/14 Add check_rfc2047_length to disable enforcement of RFC 2047 length
+      checking when decoding. Apparently there are clients that generate
+      overlong encoded strings. Why am I not surprised?
+
+PH/15 If the first argument of "${if match_address" was not empty, but did not
+      contain an "@" character, Exim crashed. Now it writes a panic log message
+      and treats the condition as false.
+
+PH/16 In autoreply, treat an empty string for "once" the same as unset.
+
+PH/17 A further patch from the Sieve maintainer: "Introduce the new Sieve
+      extension "envelope-auth".  The code is finished and in agreement with
+      other implementations, but there is no documentation so far and in fact,
+      nobody wrote the draft yet.  This extension is currently #undef'ed, thus
+      not changing the active code.
+
+      Print executed "if" and "elsif" statements when debugging is used. This
+      helps a great deal to understand what a filter does.
+
+      Document more things not specified clearly in RFC3028.  I had all this
+      sorted out, when out of a sudden new issues came to my mind.  Oops."
+
+PH/18 Exim was not recognizing the "net-" search type prefix in match_ip lists
+      (Bugzilla #53).
+
+PH/19 Exim expands the IPv6 address given to -bh to its full non-abbreviated
+      canonical form (as documented). However, after a host name lookup from
+      the IP address, check_host() was doing a simple string comparison with
+      addresses acquired from the DNS when checking that the found name did
+      have the original IP as one of its addresses. Since any found IPv6
+      addresses are likely to be in abbreviated form, the comparison could
+      fail. Luckily, there already exists a function for doing the comparison
+      by converting both addresses to binary, so now that is used instead of
+      the text comparison.
+
+PH/20 There was another similar case to PH/19, when a complete host name was
+      given in a host list; looking up its IP address could give an abbreviated
+      form, whereas the current host's name might or might not be abbreviated.
+      The same fix has been applied.
+
+
+Exim version 4.54
+-----------------
+
+PH/01 The ${base62: operator adjusted itself to base 36 when BASE_62 was
+      set to 36 (for Darwin and Cygwin), but the ${base62d: operator did not.
+      It now does.
+
+PH/02 Two minor problems detected in Cygwin: the os.{c,h} files had lost */ on
+      the CVS lines, and there was a missing #if HAVE_IPV6 in host.c.
+
+PH/03 Typo: missing ".o" in src/pcre/Makefile.
+
+PH/04 Tighten up "personal" tests: Instead of testing for any "List-"
+      header line, restrict the check to what is listed in RFCs 2369 and 2929.
+      Also, for "Auto-Submitted", treat anything other than "no" as
+      non-personal, in accordance with RFC 3834. (Previously it treated
+      anything starting "auto-" as non-personal.)
+
+TF/01 The control=submission/name=... option had a problem with syntax
+      errors if the name included a slash character. The /name= option
+      now slurps the rest of the string, so it can include any characters
+      but it must come last in the list of options (after /sender_retain
+      or /domain=).
+
+PH/05 Some modifications to the interface to the fake nameserver for the new
+      testing suite.
+
+
+
+Exim version 4.53
+-----------------
+
+TK/01 Added the "success_on_redirect" address verification option. See
+      NewStuff for rationale and an example.
+
+PH/01 Added support for SQLite, basic code supplied by David Woodhouse.
+
+PH/02 Patch to exigrep to allow it to work on syslog lines.
+
+PH/03 When creating an mbox file for a virus/spam scan, use fseek() instead of
+      fread() to skip over the body file's header line, because in Cygwin the
+      header line is locked and is inaccessible.
+
+PH/04 Added $message_exim_id, ultimately to replace $message_id (they will both
+      co-exist for some time) to make it clear that it is the Exim ID that is
+      referenced, not the Message-ID: header line.
+
+PH/05 Replaced all Tom's calls to snprintf() with calls to the internal
+      string_format() function, because snprintf() does not exist on all
+      operating systems.
+
+PH/06 The use of forbid_filter_existstest now also locks out the use of the
+      ${stat: expansion item.
+
+PH/07 Changed "SMTP protocol violation: synchronization error" into "SMTP
+      protocol synchronization error", to keep the pedants happy.
+
+PH/08 Arrange for USE_INET_NTOA_FIX to be set in config.h for AIX systems as
+      well as for IRIX systems, when gcc is being used. See the host.c source
+      file for comments.
+
+PH/09 Installed latest Cygwin configuration files from the Cygwin maintainer.
+
+PH/10 Named domain lists were not working if used in a queue_smtp_domains
+      setting.
+
+PH/11 Added support for the IGNOREQUOTA extension to LMTP, both to the lmtp
+      transport and to the smtp transport in LMTP mode.
+
+TK/02 Remove one case of BASE64 error detection FTTB (undocumented anyway).
+
+PH/12 There was a missing call to search_tidyup() before the fork() in rda.c to
+      run a filter in a subprocess. This could lead to confusion in subsequent
+      lookups in the parent process. There should also be a search_tidyup() at
+      the end of the subprocess.
+
+PH/13 Previously, if "verify = helo" was set in an ACL, the condition was true
+      only if the host matched helo_try_verify_hosts, which caused the
+      verification to occur when the EHLO/HELO command was issued. The ACL just
+      tested the remembered result. Now, if a previous verification attempt has
+      not happened, "verify = helo" does it there and then.
+
+JJ/01 exipick: added $message_exim_id variable (see 4.53-PH/04)
+
+TK/03 Fix log output including CR from clamd.
+
+PH/14 A reference to $reply_address when Reply-to: was empty and From: did not
+      exist provoked a memory error which could cause a segfault.
+
+PH/15 Installed PCRE 6.2
+
+PH/17 Defined BIND_8_COMPAT in the Darwin os.h file.
+
+PH/18 Reversed 4.52/PH/17 because the HP-UX user found it wasn't the cause
+      of the problem. Specifically, suggested +O2 rather than +O1 for the
+      HP-UX compiler.
+
+PH/19 Added sqlite_lock_timeout option (David Woodhouse's patch).
+
+PH/20 If a delivery was routed to a non-standard port by means of an SRV
+      record, the port was not correctly logged when the outgoing_port log
+      selector was set (it logged the transort's default port).
+
+PH/21 Added support for host-specific ports to manualroute, queryprogram,
+      fallback_hosts, and "hosts" in the smtp transport.
+
+PH/22 If the log selector "outgoing_port" is set, the port is now also given on
+      host errors such as "Connection refused".
+
+PH/23 Applied a patch to fix problems with exim-4.52 while doing radius
+      authentication with radiusclient 0.4.9:
+
+      - Error returned from rc_read_config was caught wrongly
+      - Username/password not passed on to radius server due to wrong length.
+
+      The presumption is that some radiusclient API changes for 4.51/PH/17
+      were not taken care of correctly. The code is still untested by me (my
+      Linux distribution still has 0.3.2 of radiusclient), but it was
+      contributed by a Radius user.
+
+PH/24 When doing a callout, the value of $domain wasn't set correctly when
+      expanding the "port" option of the smtp transport.
+
+TK/04 MIME ACL: Fix buffer underrun that occurs when EOF condition is met
+      while reading a MIME header. Thanks to Tom Hughes for a patch.
+
+PH/24 Include config.h inside local_scan.h so that configuration settings are
+      available.
+
+PH/25 Make $smtp_command_argument available after all SMTP commands. This means
+      that in an ACL for RCPT (for example), you can examine exactly what was
+      received.
+
+PH/26 Exim was recognizing IPv6 addresses of the form [IPv6:....] in EHLO
+      commands, but it was not correctly comparing the address with the actual
+      client host address. Thus, it would show the EHLO address in Received:
+      header lines when this was not necessary.
+
+PH/27 Added the % operator to ${eval:}.
+
+PH/28 Exim tries to create and chdir to its spool directory when it starts;
+      it should be ignoring failures (because with -C, for example, it has lost
+      privilege). It wasn't ignoring creation failures other than "already
+      exists".
+
+PH/29 Added "crypteq" to the list of supported features that Exim outputs when
+      -bV or -d is used.
+
+PH/30 Fixed (presumably very longstanding) bug in exim_dbmbuild: if it failed
+      because an input line was too long, either on its own, or by virtue of
+      too many continuations, the temporary file was not being removed, and the
+      return code was incorrect.
+
+PH/31 Missing "BOOL" in function definition in filtertest.c.
+
+PH/32 Applied Sieve patches from the maintainer.
+
+TK/05 Domainkeys: Accomodate for a minor API change in libdomainkeys 0.67.
+
+PH/33 Added "verify = not_blind".
+
+PH/34 There are settings for CHOWN_COMMAND and MV_COMMAND that can be used in
+      Local/Makefile (with some defaults set). These are used in built scripts
+      such as exicyclog, but they have never been used in the exim_install
+      script (though there are many overriding facilities there). I have
+      arranged that the exim_install script now takes note of these two
+      settings.
+
+PH/35 Installed configuration files for Dragonfly.
+
+PH/36 When a locally submitted message by a trusted user did not contain a
+      From: header, and the sender address was obtained from -f or from an SMTP
+      MAIL command, and the trusted user did not use -F to supply a sender
+      name, $originator_name was incorrectly used when constructing a From:
+      header. Furthermore, $originator_name was used for submission mode
+      messages from external hosts without From: headers in a similar way,
+      which is clearly wrong.
+
+PH/37 Added control=suppress_local_fixups.
+
+PH/38 When log_selector = +received_sender was set, and the addition of the
+      sender made the log line's construction buffer exactly full, or one byte
+      less than full, an overflow happened when the terminating "\n" was
+      subsequently added.
+
+PH/39 Added a new log selector, "unknown_in_list", which provokes a log entry
+      when the result of a list match is failure because a DNS lookup failed.
+
+PH/40 RM_COMMAND is now used in the building process.
+
+PH/41 Added a "distclean" target to the top-level Makefile; it deletes all
+      the "build-* directories that it finds.
+
+PH/42 (But a TF fix): In a domain list, Exim incorrectly matched @[] if the IP
+      address in a domain literal was a prefix of an interface address.
+
+PH/43 (Again a TF fix): In the dnslookup router, do not apply widen_domains
+      when verifying a sender address, unless rewrite_headers is false.
+
+PH/44 Wrote a long comment about why errors_to addresses are verified as
+      recipients, not senders.
+
+TF/01 Add missing LIBS=-lm to OS/Makefile-OpenBSD which was overlooked when
+      the ratelimit ACL was added.
+
+PH/45 Added $smtp_command for the full command (cf $smtp_command_argument).
+
+PH/46 Added extra information about PostgreSQL errors to the error string.
+
+PH/47 Added an interface to a fake DNS resolver for use by the new test suite,
+      avoiding the need to install special zones in a real server. This is
+      backwards compatible; if it can't find the fake resolver, it drops back.
+      Thus, both old and new test suites can be run.
+
+TF/02 Added util/ratelimit.pl
+
+TF/03 Minor fix to the ratelimit code to improve its behaviour in case the
+      clock is set back in time.
+
+TF/04 Fix the ratelimit support in exim_fixdb. Patch provided by Brian
+      Candler <B.Candler@pobox.com>.
+
+TF/05 The fix for PH/43 was not completely correct; widen_domains is always
+      OK for addresses that are the result of redirections.
+
+PH/48 A number of further additions for the benefit of the new test suite,
+      including a fake gethostbyname() that interfaces to the fake DNS resolver
+      (see PH/47 above).
+
+TF/06 The fix for widen_domains has also been applied to qualify_single and
+      search_parents which are the other dnslookup options that can cause
+      header rewrites.
+
+PH/49 Michael Haardt's randomized retrying, but as a separate retry parameter
+      type ("H").
+
+PH/50 Make never_users, trusted_users, admin_groups, trusted_groups expandable.
+
+TF/07 Exim produced the error message "an SRV record indicated no SMTP
+      service" if it encountered an MX record with an empty target hostname.
+      The message is now "an MX or SRV record indicated no SMTP service".
+
+TF/08 Change PH/13 introduced the possibility that verify=helo may defer,
+      if the DNS of the sending site is misconfigured. This is quite a
+      common situation. This change restores the behaviour of treating a
+      helo verification defer as a failure.
+
+PH/51 If self=fail was set on a router, the bounce message did not include the
+      actual error message.
+
+
+Exim version 4.52
+-----------------
+
+TF/01 Added support for Client SMTP Authorization. See NewStuff for details.
+
+PH/01 When a transport filter timed out in a pipe delivery, and the pipe
+      command itself ended in error, the underlying message about the transport
+      filter timeout was being overwritten with the pipe command error. Now the
+      underlying error message should be appended to the second error message.
+
+TK/01 Fix poll() being unavailable on Mac OSX 10.2.
+
+PH/02 Reduce the amount of output that "make" produces by default. Full output
+      can still be requested.
+
+PH/03 The warning log line about a condition test deferring for a "warn" verb
+      was being output only once per connection, rather than after each
+      occurrence (because it was using the same function as for successful
+      "warn" verbs). This seems wrong, so I have changed it.
+
+TF/02 Two buglets in acl.c which caused Exim to read a few bytes of memory that
+      it should not have, which might have caused a crash in the right
+      circumstances, but probably never did.
+
+PH/04 Installed a modified version of Tony Finch's patch to make submission
+      mode fix the return path as well as the Sender: header line, and to
+      add a /name= option so that you can make the user's friendly name appear
+      in the header line.
+
+TF/03 Added the control = fakedefer ACL modifier.
+
+TF/04 Added the ratelimit ACL condition. See NewStuff for details. Thanks to
+      Mark Lowes for thorough testing.
+
+TK/02 Rewrote SPF support to work with libspf2 versions >1.2.0.
+
+TK/03 Merged latest SRS patch from Miles Wilton.
+
+PH/05 There's a shambles in IRIX6 - it defines EX_OK in unistd.h which conflicts
+      with the definition in sysexits.h (which is #included earlier).
+      Fortunately, Exim does not actually use EX_OK. The code used to try to
+      preserve the sysexits.h value, by assuming that macro definitions were
+      scanned for macro replacements. I have been disabused of this notion,
+      so now the code just undefines EX_OK before #including unistd.h.
+
+PH/06 There is a timeout for writing blocks of data, set by, e.g. data_timeout
+      in the smtp transport. When a block could not be written in a single
+      write() function, the timeout was being re-applied to each part-write.
+      This seems wrong - if the receiver was accepting one byte at a time it
+      would take for ever. The timeout is now adjusted when this happens. It
+      doesn't have to be particularly precise.
+
+TK/04 Added simple SPF lookup method in EXPERIMENTAL_SPF. See NewStuff for
+      details. Thanks to Chris Webb <chris@arachsys.com> for the patch!
+
+PH/07 Added "fullpostmaster" verify option, which does a check to <postmaster>
+      without a domain if the check to <postmaster@domain> fails.
+
+SC/01 Eximstats: added -xls and the ability to specify output files
+     (patch written by Frank Heydlauf).
+
+SC/02 Eximstats: use FileHandles for outputting results.
+
+SC/03 Eximstats: allow any combination of xls, txt, and html output.
+
+SC/04 Eximstats: fixed display of large numbers with -nvr option
+
+SC/05 Eximstats: fixed merging of reports with empty tables.
+
+SC/06 Eximstats: added the -include_original_destination flag
+
+SC/07 Eximstats: removed tabs and trailing whitespace.
+
+TK/05 Malware: Improve on aveserver error handling. Patch from Alex Miller.
+
+TK/06 MBOX spool code: Add real "From " MBOX separator line
+      so the .eml file is really in mbox format (even though
+      most programs do not really care). Patch from Alex Miller.
+
+TK/07 MBOX spool code: Add X-Envelope-From: and X-Envelope-To: headers.
+      The latter is generated from $received_to and is only set if the
+      message has one envelope recipient. SA can use these headers,
+      obviously out-of-the-box. Patch from Alex Miller.
+
+PH/08 The ${def test on a variable was returning false if the variable's
+      value was "0", contrary to what the specification has always said!
+      The result should be true unless the variable is empty.
+
+PH/09 The syntax error of a character other than { following "${if
+      def:variable_name" (after optional whitespace) was not being diagnosed.
+      An expansion such as ${if def:sender_ident:{xxx}{yyy}} in which an
+      accidental colon was present, for example, could give incorrect results.
+
+PH/10 Tidied the code in a number of places where the st_size field of a stat()
+      result is used (not including appendfile, where other changes are about
+      to be made).
+
+PH/11 Upgraded appendfile so that quotas larger than 2G are now supported.
+      This involved changing a lot of size variables from int to off_t. It
+      should work with maildirs and everything.
+
+TK/08 Apply fix provided by Michael Haardt to prevent deadlock in case of
+      spamd dying while we are connected to it.
+
+TF/05 Fixed a ${extract error message typo reported by Jeremy Harris
+      <jgh@wizmail.org>
+
+PH/12 Applied Alex Kiernan's patch for the API change for the error callback
+      function for BDB 4.3.
+
+PH/13 Changed auto_thaw such that it does not apply to bounce messages.
+
+PH/14 Imported PCRE 6.0; this was more than just a trivial operation because
+      the sources for PCRE have been re-arranged and more files are now
+      involved.
+
+PH/15 The code I had for printing potentially long long variables in PH/11
+      above was not the best (it lost precision). The length of off_t variables
+      is now inspected at build time, and an appropriate printing format (%ld
+      or %lld) is chosen and #defined by OFF_T_FMT. We also define LONGLONG_T
+      to be "long long int" or "long int". This is needed for the internal
+      formatting function string_vformat().
+
+PH/16 Applied Matthew Newton's patch to exicyclog: "If log_file_path is set in
+      the configuration file to be ":syslog", then the script "guesses" where
+      the logs files are, rather than using the compiled in default. In our
+      case the guess is not the same as the compiled default, so the script
+      suddenly stopped working when I started to use syslog. The patch checks
+      to see if log_file_path is "". If so, it attempts to read it from exim
+      with no configuration file to get the compiled in version, before it
+      falls back to the previous guessing code."
+
+TK/09 Added "prvs" and "prvscheck" expansion items. These help a lot with
+      implementing BATV in an Exim configuration. See NewStuff for the gory
+      details.
+
+PH/17 Applied Michael Haardt's patch for HP-UX, affecting only the os.h and
+      Makefile that are specific to HP-UX.
+
+PH/18 If the "use_postmaster" option was set for a recipient callout together
+      with the "random" option, the postmaster address was used as the MAIL
+      FROM address for the random test, but not for the subsequent recipient
+      test. It is now used for both.
+
+PH/19 Applied Michael Haardt's patch to update Sieve to RFC3028bis. "The
+      patch removes a few documentation additions to RFC 3028, because the
+      latest draft now contains them. It adds the new en;ascii-case comparator
+      and a new error check for 8bit text in MIME parts. Comparator and
+      require names are now matched exactly. I enabled the subaddress
+      extension, but it is not well tested yet (read: it works for me)."
+
+PH/20 Added macros for time_t as for off_t (see PH/15 above) and used them to
+      rework some of the code of TK/09 above to avoid the hardwired use of
+      "%lld" and "long long". Replaced the call to snprintf() with a call to
+      string_vformat().
+
+PH/21 Added some other messages to those in 4.51/PH/42, namely "All relevant MX
+      records point to non-existent hosts", "retry timeout exceeded", and
+      "retry time not reached for any host after a long failure period".
+
+PH/22 Fixed some oversights/typos causing bugs when Exim is compiled with
+      experimental DomainKeys support:
+
+      (1) The filter variables $n0-$n9 and $sn0-$sn9 were broken.
+      (2) On an error such as an illegally used "control", the wrong name for
+          the control was given.
+
+      These problems did NOT occur unless DomainKeys support was compiled.
+
+PH/23 Added daemon_startup_retries and daemon_startup_sleep.
+
+PH/24 Added ${if match_ip condition.
+
+PH/25 Put debug statements on either side of calls to EXIM_DBOPEN() for hints
+      databases so that it will be absolutely obvious if a crash occurs in the
+      DB library. This is a regular occurrence (often caused by mis-matched
+      db.h files).
+
+PH/26 Insert a lot of missing (void) casts for functions such as chown(),
+      chmod(), fcntl(), sscanf(), and other functions from stdio.h. These were
+      picked up on a user's system that detects such things. There doesn't seem
+      to be a gcc warning option for this - only an attribute that has to be
+      put on the function's prototype. It seems that in Fedora Core 4 they have
+      set this on a number of new functions. No doubt there will be more in due
+      course.
+
+PH/27 If a dnslookup or manualroute router is set with verify=only, it need not
+      specify a transport. However, if an address that was verified by such a
+      router was the subject of a callout, Exim crashed because it tried to
+      read the rcpt_include_affixes from the non-existent transport. Now it
+      just assumes that the setting of that option is false. This bug was
+      introduced by 4.51/PH/31.
+
+PH/28 Changed -d+all to exclude +memory, because that information is very
+      rarely of interest, but it makes the output a lot bigger. People tend to
+      do -d+all out of habit.
+
+PH/29 Removed support for the Linux-libc5 build, as it is obsolete and the
+      code in os-type was giving problems when libc.so lives in lib64, like on
+      x86_64 Fedora Core.
+
+PH/30 Exim's DNS code uses the original T_xxx names for DNS record times. These
+      aren't the modern standard, and it seems that some systems' include files
+      don't always have them. Exim was already checking for some of the newer
+      ones like T_AAAA, and defining it itself. I've added checks for all the
+      record types that Exim uses.
+
+PH/31 When using GnuTLS, if the parameters cache file did not exist, Exim was
+      not automatically generating a new one, as it is supposed to. This
+      prevented TLS from working. If the file did exist, but contained invalid
+      data, a new version was generated, as expected. It was only the case of a
+      non-existent file that was broken.
+
+TK/10 Domainkeys: Fix a bug in verification that caused a crash in conjunction
+      with a change in libdomainkeys > 0.64.
+
+TK/11 Domainkeys: Change the logic how the "testing" policy flag is retrieved
+      from DNS. If the selector record carries the flag, it now has
+      precedence over the domain-wide flag.
+
+TK/12 Cleared some compiler warnings related to SPF, SRS and DK code.
+
+PH/32 In mua_wrapper mode, if an smtp transport configuration error (such as
+      the use of a port name that isn't defined in /etc/services) occurred, the
+      message was deferred as in a normal delivery, and thus remained on the
+      spool, instead of being failed because of the mua_wrapper setting. This
+      is now fixed, and I tidied up some of the mua_wrapper messages at the
+      same time.
+
+SC/08 Eximstats: whilst parsing the mainlog(s), store information about
+      the messages in a hash of arrays rather than using individual hashes.
+      This is a bit cleaner and results in dramatic memory savings, albeit
+      at a slight CPU cost.
+
+SC/09 Eximstats: added the -show_rt<list> and the -show_dt<list> flags
+      as requested by Marc Sherman.
+
+SC/10 Eximstats: added histograms for user specified patterns as requested
+      by Marc Sherman.
+
+SC/11 Eximstats: v1.43 - bugfix for pattern histograms with -h0 specified.
+
+PH/33 Patch from the Cygwin maintainer to add "b" to all occurences of
+      fopen() in the content-scanning modules that did not already have it.
+
+
+Exim version 4.51
+-----------------
+
+TK/01 Added Yahoo DomainKeys support via libdomainkeys. See
+      doc/experimental-spec.txt for details. (http://domainkeys.sf.net)
+
+TK/02 Fix ACL "control" statement not being available in MIME ACL.
+
+TK/03 Fix ACL "regex" condition not being available in MIME ACL.
+
+PH/01 Installed a patch from the Sieve maintainer that allows -bf to be used
+      to test Sieve filters that use "vacation".
+
+PH/02 Installed a slightly modified version of Nikos Mavrogiannopoulos' patch
+      that changes the way the GnuTLS parameters are stored in the cache file.
+      The new format can be generated externally. For backward compatibility,
+      if the data in the cache doesn't make sense, Exim assumes it has read an
+      old-format file, and it generates new data and writes a new file. This
+      means that you can't go back to an older release without removing the
+      file.
+
+PH/03 A redirect router that has both "unseen" and "one_time" set does not
+      work if there are any delivery delays because "one_time" forces the
+      parent to be marked "delivered", so its unseen clone is never tried
+      again. For this reason, Exim now forbids the simultaneous setting of
+      these two options.
+
+PH/04 Change 4.11/85 fixed an obscure bug concerned with addresses that are
+      redirected to themselves ("homonym" addresses). Read the long ChangeLog
+      entry if you want to know the details. The fix, however, neglected to
+      consider the case when local delivery batching is involved. The test for
+      "previously delivered" was not happening when checking to see if an
+      address could be batched with a previous (undelivered) one; under
+      certain circumstances this could lead to multiple deliveries to the same
+      address.
+
+PH/05 Renamed the macro SOCKLEN_T as EXIM_SOCKLEN_T because AIX uses SOCKLEN_T
+      in its include files, and this causes problems building Exim.
+
+PH/06 A number of "verify =" ACL conditions have no options (e.g. verify =
+      header_syntax) but Exim was just ignoring anything given after a slash.
+      In particular, this caused confusion with an attempt to use "verify =
+      reverse_host_lookup/defer_ok". An error is now given when options are
+      supplied for verify items that do not have them. (Maybe reverse_host_
+      lookup should have a defer_ok option, but that's a different point.)
+
+PH/07 Increase the size of the buffer for incoming SMTP commands from 512 (as
+      defined by RFC 821) to 2048, because there were problems with some AUTH
+      commands, and RFC 1869 says the size should be increased for extended
+      SMTP commands that take arguments.
+
+PH/08 Added ${dlfunc dynamically loaded function for expansion (code from Tony
+      Finch).
+
+PH/09 Previously, an attempt to use ${perl when it wasn't compiled gave an
+      "unknown" error; now it says that the functionality isn't in the binary.
+
+PH/10 Added a nasty fudge to try to recognize and flatten LDAP passwords in
+      an address' error message when a string expansion fails (syntax or
+      whatever). Otherwise the password may appear in the log. Following change
+      PH/42 below, there is no longer a chance of it appearing in a bounce
+      message.
+
+PH/11 Installed exipick version 20050225.0 from John Jetmore.
+
+PH/12 If the last host in a fallback_hosts list was multihomed, only the first
+      of its addresses was ever tried. (Bugzilla bug #2.)
+
+PH/13 If "headers_add" in a transport didn't end in a newline, Exim printed
+      the result incorrectly in the debug output. (It correctly added a newline
+      to what was transported.)
+
+TF/01 Added $received_time.
+
+PH/14 Modified the default configuration to add an acl_smtp_data ACL, with
+      commented out examples of how to interface to a virus scanner and to
+      SpamAssassin. Also added commented examples of av_scanner and
+      spamd_address settings.
+
+PH/15 Further to TK/02 and TK/03 above, tidied up the tables of what conditions
+      and controls are allowed in which ACLs. There were a couple of minor
+      errors. Some of the entries in the conditions table (which is a table of
+      where they are NOT allowed) were getting very unwieldy; rewrote them as a
+      negation of where the condition IS allowed.
+
+PH/16 Installed updated OS/os.c-cygwin from the Cygwin maintainer.
+
+PH/17 The API for radiusclient changed at release 0.4.0. Unfortunately, the
+      header file does not have a version number, so I've had to invent a new
+      value for RADIUS_LIB_TYPE, namely "RADIUSCLIENTNEW" to request the new
+      API. The code is untested by me (my Linux distribution still has 0.3.2 of
+      radiusclient), but it was contributed by a Radius user.
+
+PH/18 Installed Lars Mainka's patch for the support of CRL collections in
+      files or directories, for OpenSSL.
+
+PH/19 When an Exim process that is running as root has to create an Exim log
+      file, it does so in a subprocess that runs as exim:exim so as to get the
+      ownership right at creation (otherwise, other Exim processes might see
+      the file with the wrong ownership). There was no test for failure of this
+      fork() call, which would lead to the process getting stuck as it waited
+      for a non-existent subprocess. Forks do occasionally fail when resources
+      run out. I reviewed all the other calls to fork(); they all seem to check
+      for failure.
+
+PH/20 When checking for unexpected SMTP input at connect time (before writing
+      the banner), Exim was not dealing correctly with a non-positive return
+      from the read() function. If the client had disconnected by this time,
+      the result was a log entry for a synchronization error with an empty
+      string after "input=" when read() returned zero. If read() returned -1
+      (an event I could not check), uninitialized data bytes were printed.
+      There were reports of junk text (parts of files, etc) appearing after
+      "input=".
+
+PH/21 Added acl_not_smtp_mime to allow for MIME scanning for non-SMTP messages.
+
+PH/22 Added support for macro redefinition, and (re)definition in between
+      driver and ACL definitions.
+
+PH/23 The cyrus_sasl authenticator was expanding server_hostname, but then
+      forgetting to use the resulting value; it was using the unexpanded value.
+
+PH/24 The cyrus_sasl authenticator was advertising mechanisms for which it
+      hadn't been configured. The fix is from Juergen Kreileder, who
+      understands it better than I do:
+
+      "Here's what I see happening with three configured cyrus_sasl
+      authenticators configured (plain, login, cram-md5):
+
+      On startup auth_cyrus_sasl_init() gets called for each of these.
+      This means three calls to sasl_listmech() without a specified mech_list.
+      => SASL tests which mechs of all available mechs actually work
+      => three warnings about OTP not working
+      => the returned list contains: plain, login, cram-md5, digest-md5, ...
+
+      With the patch, sasl_listmech() also gets called three times.  But now
+      SASL's mech_list option is set to the server_mech specified in the the
+      authenticator.  Or in other words, the answer from sasl_listmech()
+      gets limited to just the mech you're testing for (which is different
+      for each call.)
+      => the return list contains just 'plain' or 'login', 'cram-md5' or
+      nothing depending on the value of ob->server_mech.
+
+      I've just tested the patch: Authentication still works fine,
+      unavailable mechs specified in the exim configuration are still
+      caught, and the auth.log warnings about OTP are gone."
+
+PH/25 When debugging is enabled, the contents of the command line are added
+      to the debugging output, even when log_selector=+arguments is not
+      specified.
+
+PH/26 Change scripts/os-type so that when "uname -s" returns just "GNU", the
+      answer is "GNU", and only if the return is "GNU/something" is the answer
+      "Linux".
+
+PH/27 $acl_verify_message is now set immediately after the failure of a
+      verification in an ACL, and so is available in subsequent modifiers. In
+      particular, the message can be preserved by coding like this:
+
+         warn  !verify = sender
+               set acl_m0 = $acl_verify_message
+
+      Previously, $acl_verify_message was set only while expanding "message"
+      and "log_message" when a very denied access.
+
+PH/28 Modified OS/os.c-Linux with
+
+        -#ifndef OS_LOAD_AVERAGE
+        +#if !defined(OS_LOAD_AVERAGE) && defined(__linux__)
+
+      to make Exim compile on kfreebsd-gnu. (I'm totally confused about the
+      nomenclature these days.)
+
+PH/29 Installed patch from the Sieve maintainer that adds the options
+      sieve_useraddress and sieve_subaddress to the redirect router.
+
+PH/30 In these circumstances:
+        . Two addresses routed to the same list of hosts;
+        . First host does not offer TLS;
+        . First host accepts first address;
+        . First host gives temporary error to second address;
+        . Second host offers TLS and a TLS session is established;
+        . Second host accepts second address.
+      Exim incorrectly logged both deliveries with the TLS parameters (cipher
+      and peerdn, if requested) that were in fact used only for the second
+      address.
+
+PH/31 When doing a callout as part of verifying an address, Exim was not paying
+      attention to any local part prefix or suffix that was matched by the
+      router that accepted the address. It now behaves in the same way as it
+      does for delivery: the affixes are removed from the local part unless
+      rcpt_include_affixes is set on the transport.
+
+PH/32 Add the sender address, as F=<...>, to the log line when logging a
+      timeout during the DATA phase of an incoming message.
+
+PH/33 Sieve envelope tests were broken for match types other than :is. I have
+      applied a patch sanctioned by the Sieve maintainer.
+
+PH/34 Change 4.50/80 broke Exim in that it could no longer handle cases where
+      the uid or gid is negative. A case of a negative gid caused this to be
+      noticed. The fix allows for either to be negative.
+
+PH/35 ACL_WHERE_MIME is now declared unconditionally, to avoid too much code
+      clutter, but the tables that are indexed by ACL_WHERE_xxx values had been
+      overlooked.
+
+PH/36 The change PH/12 above was broken. Fixed it.
+
+PH/37 Exim used to check for duplicate addresses in the middle of routing, on
+      the grounds that routing the same address twice would always produce the
+      same answer. This might have been true once, but it is certainly no
+      longer true now. Routing a child address may depend on the previous
+      routing that produced that child. Some complicated redirection strategies
+      went wrong when messages had multiple recipients, and made Exim's
+      behaviour dependent on the order in which the addresses were given.
+
+      I have moved the duplicate checking until after the routing is complete.
+      Exim scans the addresses that are assigned to local and remote
+      transports, and removes any duplicates. This means that more work will be
+      done, as duplicates will always all be routed, but duplicates are
+      presumably rare, so I don't expect this is of any significance.
+
+      For deliveries to pipes, files, and autoreplies, the duplicate checking
+      still happens during the routing process, since they are not going to be
+      routed further.
+
+PH/38 Installed a patch from Ian Freislich, with the agreement of Tom Kistner.
+      It corrects a timeout issue with spamd. This is Ian's comment: "The
+      background is that sometimes spamd either never reads data from a
+      connection it has accepted, or it never writes response data. The exiscan
+      spam.[ch] uses a 3600 second timeout on spamd socket reads, further, it
+      blindly assumes that writes won't block so it may never time out."
+
+PH/39 Allow G after quota size as well as K and M.
+
+PH/40 The value set for $authenticated_id in an authenticator may not contain
+      binary zeroes or newlines because the value is written to log lines and
+      to spool files. There was no check on this. Now the value is run through
+      the string_printing() function so that such characters are converted to
+      printable escape sequences.
+
+PH/41 $message_linecount is a new variable that contains the total number of
+      lines in the message. Compare $body_linecount, which is the count for the
+      body only.
+
+PH/42 Exim no longer gives details of delivery errors for specific addresses in
+      bounce and delay warning messages, except in certain special cases, which
+      are as follows:
+
+      (a) An SMTP error message from a remote host;
+      (b) A message specified in a :fail: redirection;
+      (c) A message specified in a "fail" command in a system filter;
+      (d) A message specified in a FAIL return from the queryprogram router;
+      (e) A message specified by the cannot_route_message router option.
+
+      In these cases only, Exim does include the error details in bounce and
+      warning messages. There are also a few cases where bland messages such
+      as "unrouteable address" or "local delivery error" are given.
+
+PH/43 $value is now also set for the "else" part of a ${run expansion.
+
+PH/44 Applied patch from the Sieve maintainer: "The vacation draft is still
+      being worked on, but at least Exim now implements the latest version to
+      play with."
+
+PH/45 In a pipe transport, although a timeout while waiting for the pipe
+      process to complete was treated as a delivery failure, a timeout while
+      writing the message to the pipe was logged, but erroneously treated as a
+      successful delivery. Such timeouts include transport filter timeouts. For
+      consistency with the overall process timeout, these timeouts are now
+      treated as errors, giving rise to delivery failures by default. However,
+      there is now a new Boolean option for the pipe transport called
+      timeout_defer, which, if set TRUE, converts the failures into defers for
+      both kinds of timeout. A transport filter timeout is now identified in
+      the log output.
+
+PH/46 The "scripts/Configure-config.h" script calls "make" at one point. On
+      systems where "make" and "gmake" are different, calling "gmake" at top
+      level broke things. I've arranged for the value of $(MAKE) to be passed
+      from the Makefile to this script so that it can call the same version of
+      "make".
+
+
+A note about Exim versions 4.44 and 4.50
+----------------------------------------
+
+Exim 4.50 was meant to be the next release after 4.43. It contains a lot of
+changes of various kinds. As a consequence, a big documentation update was
+needed. This delayed the release for rather longer than seemed good, especially
+in the light of a couple of (minor) security issues. Therefore, the changes
+that fixed bugs were backported into 4.43, to create a 4.44 maintenance
+release. So 4.44 and 4.50 are in effect two different branches that both start
+from 4.43.
+
+I have left the 4.50 change log unchanged; it contains all the changes since
+4.43. The change log for 4.44 is below; many of its items are identical to
+those for 4.50. This seems to be the most sensible way to preserve the
+historical information.
+
+
+Exim version 4.50
+-----------------
+
+ 1. Minor wording change to the doc/README.SIEVE file.
+
+ 2. Change 4.43/35 introduced a bug: if quota_filecount was set, the
+    computation of the current number of files was incorrect.
+
+ 3. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
+    bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
+    place.
+
+ 4. Give more explanation in the error message when the command for a transport
+    filter fails to execute.
+
+ 5. There are several places where Exim runs a non-Exim command in a
+    subprocess. The SIGUSR1 signal should be disabled for these processes. This
+    was being done only for the command run by the queryprogram router. It is
+    now done for all such subprocesses. The other cases are: ${run, transport
+    filters, and the commands run by the lmtp and pipe transports.
+
+ 6. Added CONFIGURE_GROUP build-time option.
+
+ 7. Some older OS have a limit of 256 on the maximum number of file
+    descriptors. Exim was using setrlimit() to set 1000 as a large value
+    unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
+    systems. I've change it so that if it can't get 1000, it tries for 256.
+
+ 8. "control=submission" was allowed, but had no effect, in a DATA ACL. This
+    was an oversight, and furthermore, ever since the addition of extra
+    controls (e.g. 4.43/32), the checks on when to allow different forms of
+    "control" were broken. There should now be diagnostics for all cases when a
+    control that does not make sense is encountered.
+
+ 9. Added the /retain_sender option to "control=submission".
+
+10. $recipients is now available in the predata ACL (oversight).
+
+11. Tidy the search cache before the fork to do a delivery from a message
+    received from the command line. Otherwise the child will trigger a lookup
+    failure and thereby defer the delivery if it tries to use (for example) a
+    cached ldap connection that the parent has called unbind on.
+
+12. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
+    of $address_data from the recipient verification was clobbered by the
+    sender verification.
+
+13. The value of address_data from a sender verification is now available in
+    $sender_address_data in subsequent conditions in the ACL statement.
+
+14. Added forbid_sieve_filter and forbid_exim_filter to the redirect router.
+
+15. Added a new option "connect=<time>" to callout options, to set a different
+    connection timeout.
+
+16. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
+    was its contents. (It was OK if the option was not defined at all.)
+
+17. A "Completed" log line is now written for messages that are removed from
+    the spool by the -Mrm option.
+
+18. New variables $sender_verify_failure and $recipient_verify_failure contain
+    information about exactly what failed.
+
+19. Added -dd to debug only the daemon process.
+
+20. Incorporated Michael Haardt's patch to ldap.c for improving the way it
+    handles timeouts, both on the server side and network timeouts. Renamed the
+    CONNECT parameter as NETTIMEOUT (but kept the old name for compatibility).
+
+21. The rare case of EHLO->STARTTLS->HELO was setting the protocol to "smtp".
+    It is now set to "smtps".
+
+22. $host_address is now set to the target address during the checking of
+    ignore_target_hosts.
+
+23. When checking ignore_target_hosts for an ipliteral router, no host name was
+    being passed; this would have caused $sender_host_name to have been used if
+    matching the list had actually called for a host name (not very likely,
+    since this list is usually IP addresses). A host name is now passed as
+    "[x.x.x.x]".
+
+24. Changed the calls that set up the SIGCHLD handler in the daemon to use the
+    code that specifies a non-restarting handler (typically sigaction() in
+    modern systems) in an attempt to fix a rare and obscure crash bug.
+
+25. Narrowed the window for a race in the daemon that could cause it to ignore
+    SIGCHLD signals. This is not a major problem, because they are used only to
+    wake it up if nothing else does.
+
+26. A malformed maildirsize file could cause Exim to calculate negative values
+    for the mailbox size or file count. Odd effects could occur as a result.
+    The maildirsize information is now recalculated if the size or filecount
+    end up negative.
+
+27. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
+    support for a long time. Removed HAVE_SYS_VFS_H.
+
+28. Installed the latest version of exipick from John Jetmore.
+
+29. In an address list, if the pattern was not a regular expression, an empty
+    subject address (from a bounce message) matched only if the pattern was an
+    empty string. Non-empty patterns were not even tested. This was the wrong
+    because it is perfectly reasonable to use an empty address as part of a
+    database query. An empty address is now tested by patterns that are
+    lookups. However, all the other forms of pattern expect the subject to
+    contain a local part and a domain, and therefore, for them, an empty
+    address still always fails if the pattern is not itself empty.
+
+30. Exim went into a mad DNS loop when attempting to do a callout where the
+    host was specified on an smtp transport, and looking it up yielded more
+    than one IP address.
+
+31. Re-factored the code for checking spool and log partition space into a
+    function that finds that data and another that does the check. The former
+    is then used to implement four new variables: $spool_space, $log_space,
+    $spool_inodes, and $log_inodes.
+
+32. The RFC2047 encoding function was originally intended for short strings
+    such as real names; it was not keeping to the 75-character limit for
+    encoded words that the RFC imposes. It now respects the limit, and
+    generates multiple encoded words if necessary. To be on the safe side, I
+    have increased the buffer size for the ${rfc2047: expansion operator from
+    1024 to 2048 bytes.
+
+33. It is now permitted to omit both strings after an "if" condition; if the
+    condition is true, the result is "true". As before, when the second string
+    is omitted, a false condition yields an empty string. This makes it less
+    cumbersome to write custom ACL and router conditions.
+
+34. Failure to deliver a bounce message always caused it to be frozen, even if
+    there was an errors_to setting on the router. The errors_to setting is now
+    respected.
+
+35. If an IPv6 address is given for -bh or -bhc, it is now converted to the
+    canonical form (fully expanded) before being placed in
+    $sender_host_address.
+
+36. The table in the code that translates DNS record types into text (T_A to
+    "A" for instance) was missing entries for NS and CNAME. It is just possible
+    that this could have caused confusion if both these types were looked up
+    for the same domain, because the text type is used as part of Exim's
+    per-process caching. But the chance of anyone hitting this buglet seems
+    very small.
+
+37. The dnsdb lookup has been extended in a number of ways.
+
+    (1) There is a new type, "zns", which walks up the domain tree until it
+        finds some nameserver records. It should be used with care.
+
+    (2) There is a new type, "mxh", which is like "mx" except that it returns
+        just the host names, not the priorities.
+
+    (3) It is now possible to give a list of domains (or IP addresses) to be
+        looked up. The behaviour when one of the lookups defers can be
+        controlled by a keyword.
+
+    (4) It is now possible to specify the separator character for use when
+        multiple records are returned.
+
+38. The dnslists ACL condition has been extended: it is now possible to supply
+    a list of IP addresses and/or domains to be looked up in a particular DNS
+    domain.
+
+39. Added log_selector=+queue_time_overall.
+
+40. When running the queue in the test harness, wait just a tad after forking a
+    delivery process, to get repeatability of debugging output.
+
+41. Include certificate and key file names in error message when GnuTLS fails
+    to set them up, because the GnuTLS error message doesn't include the name
+    of the failing file when there is a problem reading it.
+
+42. Allow both -bf and -bF in the same test run.
+
+43. Did the same fix as 41 above for OpenSSL, which had the same infelicity.
+
+44. The "Exiscan patch" is now merged into the mainline Exim source.
+
+45. Sometimes the final signoff response after QUIT could fail to get
+    transmitted in the non-TLS case. Testing !tls_active instead of tls_active
+    < 0 before doing a fflush(). This bug looks as though it goes back to the
+    introduction of TLS in release 3.20, but "sometimes" must have been rare
+    because the tests only now provoked it.
+
+46. Reset the locale to "C" after calling embedded Perl, in case it was changed
+    (this can affect the format of dates).
+
+47. exim_tidydb, when checking for the continued existence of a message for
+    which it has found a message-specific retry record, was not finding
+    messages that were in split spool directories. Consequently, it was
+    deleting retry records that should have stayed in existence.
+
+48. Steve fixed some bugs in eximstats.
+
+49. The SPA authentication driver was not abandoning authentication and moving
+    on to the next authenticator when an expansion was forced to fail,
+    contradicting the general specification for all authenticators. Instead it
+    was generating a temporary error. It now behaves as specified.
+
+50. The default ordering of permitted cipher suites for GnuTLS was pessimal
+    (the order specifies the preference for clients). The order is now AES256,
+    AES128, 3DES, ARCFOUR128.
+
+51. Small patch to Sieve code - explicitly set From: when generating an
+    autoreply.
+
+52. Exim crashed if a remote delivery caused a very long error message to be
+    recorded - for instance if somebody sent an entire SpamAssassin report back
+    as a large number of 550 error lines. This bug was coincidentally fixed by
+    increasing the size of one of Exim's internal buffers (big_buffer) that
+    happened as part of the Exiscan merge. However, to be on the safe side, I
+    have made the code more robust (and fixed the comments that describe what
+    is going on).
+
+53. Now that there can be additional text after "Completed" in log lines (if
+    the queue_time_overall log selector is set), a one-byte patch to exigrep
+    was needed to allow it to recognize "Completed" as not the last thing in
+    the line.
+
+54. The LDAP lookup was not handling a return of LDAP_RES_SEARCH_REFERENCE. A
+    patch that reportedly fixes this has been added. I am not expert enough to
+    create a test for it. This is what the patch creator wrote:
+
+      "I found a little strange behaviour of ldap code when working with
+      Windows 2003 AD Domain, where users was placed in more than one
+      Organization Units. When I tried to give exim partial DN, the exit code
+      of ldap_search was unknown to exim because of LDAP_RES_SEARCH_REFERENCE.
+      But simultaneously result of request was absolutely normal ldap result,
+      so I produce this patch..."
+
+    Later: it seems that not all versions of LDAP support LDAP_RES_SEARCH_
+    REFERENCE, so I have modified the code to exclude the patch when that macro
+    is not defined.
+
+55. Some experimental protocols are using DNS PTR records for new purposes. The
+    keys for these records are domain names, not reversed IP addresses. The
+    dnsdb PTR lookup now tests whether its key is an IP address. If not, it
+    leaves it alone. Component reversal etc. now happens only for IP addresses.
+    CAN-2005-0021
+
+56. Improve error message when ldap_search() fails in OpenLDAP or Solaris LDAP.
+
+57. Double the size of the debug message buffer (to 2048) so that more of very
+    long debug lines gets shown.
+
+58. The exicyclog utility now does better if the number of log files to keep
+    exceeds 99. In this case, it numbers them 001, 002 ... instead of 01, 02...
+
+59. Two changes related to the smtp_active_hostname option:
+
+      (1) $smtp_active_hostname is now available as a variable.
+      (2) The default for smtp_banner uses $smtp_active_hostname instead
+          of $primary_hostname.
+
+60. The host_aton() function is supposed to be passed a string that is known
+    to be a valid IP address. However, in the case of IPv6 addresses, it was
+    not checking this. This is a hostage to fortune. Exim now panics and dies
+    if the condition is not met. A case was found where this could be provoked
+    from a dnsdb PTR lookup with an IPv6 address that had more than 8
+    components; fortuitously, this particular loophole had already been fixed
+    by change 4.50/55 above.
+
+    If there are any other similar loopholes, the new check in host_aton()
+    itself should stop them being exploited. The report I received stated that
+    data on the command line could provoke the exploit when Exim was running as
+    exim, but did not say which command line option was involved. All I could
+    find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
+    running as the user.
+    CAN-2005-0021
+
+61. There was a buffer overflow vulnerability in the SPA authentication code
+    (which came originally from the Samba project). I have added a test to the
+    spa_base64_to_bits() function which I hope fixes it.
+    CAN-2005-0022
+
+62. Configuration update for GNU/Hurd and variations. Updated Makefile-GNU and
+    os.h-GNU, and added configuration files for GNUkFreeBSD and GNUkNetBSD.
+
+63. The daemon start-up calls getloadavg() while still root for those OS that
+    need the first call to be done as root, but it missed one case: when
+    deliver_queue_load_max is set with deliver_drop_privilege. This is
+    necessary for the benefit of the queue runner, because there is no re-exec
+    when deliver_drop_privilege is set.
+
+64. A call to exiwhat cut short delays set up by "delay" modifiers in ACLs.
+    This has been fixed.
+
+65. Caching of lookup data for "hosts =" ACL conditions, when a named host list
+    was in use, was not putting the data itself into the right store pool;
+    consequently, it could be overwritten for a subsequent message in the same
+    SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
+    the caching.)
+
+66. Added hosts_max_try_hardlimit to the smtp transport, default 50.
+
+67. The string_is_ip_address() function returns 0, 4, or 6, for "no an IP
+    address", "IPv4 address", and "IPv6 address", respectively. Some calls of
+    the function were treating the return as a boolean value, which happened to
+    work because 0=false and not-0=true, but is not correct code.
+
+68. The host_aton() function was not handling scoped IPv6 addresses (those
+    with, for example, "%eth0" on the end) correctly.
+
+69. Fixed some compiler warnings in acl.c for the bitmaps specified with
+    negated items (that is, ~something) in unsigned ints. Some compilers
+    apparently mutter when there is no cast.
+
+70. If an address verification called from an ACL failed, and did not produce a
+    user-specific message (i.e. there was only a "system" message), nothing was
+    put in $acl_verify_message. In this situation, it now puts the system
+    message there.
+
+71. Change 4.23/11 added synchronization checking at the start of an SMTP
+    session; change 4.31/43 added the unwanted input to the log line - except
+    that it did not do this in the start of session case. It now does.
+
+72. After a timeout in a callout SMTP session, Exim still sent a QUIT command.
+    This is wrong and can cause the other end to generate a synchronization
+    error if it is another Exim or anything else that does the synchronization
+    check. A QUIT command is no longer sent after a timeout.
+
+73. $host_lookup_deferred has been added, to make it easier to detect DEFERs
+    during host lookups.
+
+74. The defer_ok option of callout verification was not working if it was used
+    when verifying addresses in header lines, that is, for this case:
+
+      verify = header_sender/callout=defer_ok
+
+75. A backgrounded daemon closed stdin/stdout/stderr on entry; this meant that
+    those file descriptors could be used for SMTP connections. If anything
+    wrote to stderr (the example that came up was "warn" in embedded Perl), it
+    could be sent to the SMTP client, causing chaos. The daemon now opens
+    stdin, stdout, and stderr to /dev/null when it puts itself into the
+    background.
+
+76. Arrange for output from Perl's "warn" command to be written to Exim's main
+    log by default. The user can override this with suitable Perl magic.
+
+77. The use of log_message on a "discard" ACL verb, which is supposed to add to
+    the log message when discard triggers, was not working for the DATA ACL or
+    for the non-SMTP ACL.
+
+78. Error message wording change in sieve.c.
+
+79. If smtp_accept_max_per_host was set, the number of connections could be
+    restricted to fewer than expected, because the daemon was trying to set up
+    a new connection before checking whether the processes handling previous
+    connections had finished. The check for completed processes is now done
+    earlier. On busy systems, this bug wouldn't be noticed because something
+    else would have woken the daemon, and it would have reaped the completed
+    process earlier.
+
+80. If a message was submitted locally by a user whose login name contained one
+    or more spaces (ugh!), the spool file that Exim wrote was not re-readable.
+    It caused a spool format error. I have fixed the spool reading code. A
+    related problem was that the "from" clause in the Received: line became
+    illegal because of the space(s). It is now covered by ${quote_local_part.
+
+81. Included the latest eximstats from Steve (adds average sizes to HTML Top
+    tables).
+
+82. Updated OS/Makefile-AIX as per message from Mike Meredith.
+
+83. Patch from Sieve maintainer to fix unterminated string problem in
+    "vacation" handling.
+
+84. Some minor changes to the Linux configuration files to help with other
+    OS variants using glibc.
+
+85. One more patch for Sieve to update vacation handling to latest spec.
+
+
+----------------------------------------------------
+See the note above about the 4.44 and 4.50 releases.
+----------------------------------------------------
+
+
+Exim version 4.44
+-----------------
+
+ 1. Change 4.43/35 introduced a bug that caused file counts to be
+    incorrectly computed when quota_filecount was set in an appendfile
+    transport
+
+ 2. Closing a stable door: arrange to panic-die if setitimer() ever fails. The
+    bug fixed in 4.43/37 would have been diagnosed quickly if this had been in
+    place.
+
+ 3. Give more explanation in the error message when the command for a transport
+    filter fails to execute.
+
+ 4. There are several places where Exim runs a non-Exim command in a
+    subprocess. The SIGUSR1 signal should be disabled for these processes. This
+    was being done only for the command run by the queryprogram router. It is
+    now done for all such subprocesses. The other cases are: ${run, transport
+    filters, and the commands run by the lmtp and pipe transports.
+
+ 5. Some older OS have a limit of 256 on the maximum number of file
+    descriptors. Exim was using setrlimit() to set 1000 as a large value
+    unlikely to be exceeded. Change 4.43/17 caused a lot of logging on these
+    systems. I've change it so that if it can't get 1000, it tries for 256.
+
+ 6. "control=submission" was allowed, but had no effect, in a DATA ACL. This
+    was an oversight, and furthermore, ever since the addition of extra
+    controls (e.g. 4.43/32), the checks on when to allow different forms of
+    "control" were broken. There should now be diagnostics for all cases when a
+    control that does not make sense is encountered.
+
+ 7. $recipients is now available in the predata ACL (oversight).
+
+ 8. Tidy the search cache before the fork to do a delivery from a message
+    received from the command line. Otherwise the child will trigger a lookup
+    failure and thereby defer the delivery if it tries to use (for example) a
+    cached ldap connection that the parent has called unbind on.
+
+ 9. If verify=recipient was followed by verify=sender in a RCPT ACL, the value
+    of $address_data from the recipient verification was clobbered by the
+    sender verification.
+
+10. If FIXED_NEVER_USERS was defined, but empty, Exim was assuming the uid 0
+    was its contents. (It was OK if the option was not defined at all.)
+
+11. A "Completed" log line is now written for messages that are removed from
+    the spool by the -Mrm option.
+
+12. $host_address is now set to the target address during the checking of
+    ignore_target_hosts.
+
+13. When checking ignore_target_hosts for an ipliteral router, no host name was
+    being passed; this would have caused $sender_host_name to have been used if
+    matching the list had actually called for a host name (not very likely,
+    since this list is usually IP addresses). A host name is now passed as
+    "[x.x.x.x]".
+
+14. Changed the calls that set up the SIGCHLD handler in the daemon to use the
+    code that specifies a non-restarting handler (typically sigaction() in
+    modern systems) in an attempt to fix a rare and obscure crash bug.
+
+15. Narrowed the window for a race in the daemon that could cause it to ignore
+    SIGCHLD signals. This is not a major problem, because they are used only to
+    wake it up if nothing else does.
+
+16. A malformed maildirsize file could cause Exim to calculate negative values
+    for the mailbox size or file count. Odd effects could occur as a result.
+    The maildirsize information is now recalculated if the size or filecount
+    end up negative.
+
+17. Added HAVE_SYS_STATVFS_H to the os.h file for Linux, as it has had this
+    support for a long time. Removed HAVE_SYS_VFS_H.
+
+18. Updated exipick to current release from John Jetmore.
+
+19. Allow an empty sender to be matched against a lookup in an address list.
+    Previously the only cases considered were a regular expression, or an
+    empty pattern.
+
+20. Exim went into a mad DNS lookup loop when doing a callout where the
+    host was specified on the transport, if the DNS lookup yielded more than
+    one IP address.
+
+21. The RFC2047 encoding function was originally intended for short strings
+    such as real names; it was not keeping to the 75-character limit for
+    encoded words that the RFC imposes. It now respects the limit, and
+    generates multiple encoded words if necessary. To be on the safe side, I
+    have increased the buffer size for the ${rfc2047: expansion operator from
+    1024 to 2048 bytes.
+
+22. Failure to deliver a bounce message always caused it to be frozen, even if
+    there was an errors_to setting on the router. The errors_to setting is now
+    respected.
+
+23. If an IPv6 address is given for -bh or -bhc, it is now converted to the
+    canonical form (fully expanded) before being placed in
+    $sender_host_address.
+
+24. Updated eximstats to version 1.33
+
+25. Include certificate and key file names in error message when GnuTLS fails
+    to set them up, because the GnuTLS error message doesn't include the name
+    of the failing file when there is a problem reading it.
+
+26. Expand error message when OpenSSL has problems setting up cert/key files.
+    As per change 25.
+
+27. Reset the locale to "C" after calling embedded Perl, in case it was changed
+    (this can affect the format of dates).
+
+28. exim_tidydb, when checking for the continued existence of a message for
+    which it has found a message-specific retry record, was not finding
+    messages that were in split spool directories. Consequently, it was
+    deleting retry records that should have stayed in existence.
+
+29. eximstats updated to version 1.35
+    1.34 - allow eximstats to parse syslog lines as well as mainlog lines
+    1.35 - bugfix such that pie charts by volume are generated correctly
+
+30. The SPA authentication driver was not abandoning authentication and moving
+    on to the next authenticator when an expansion was forced to fail,
+    contradicting the general specification for all authenticators. Instead it
+    was generating a temporary error. It now behaves as specified.
+
+31. The default ordering of permitted cipher suites for GnuTLS was pessimal
+    (the order specifies the preference for clients). The order is now AES256,
+    AES128, 3DES, ARCFOUR128.
+
+31. Small patch to Sieve code - explicitly set From: when generating an
+    autoreply.
+
+32. Exim crashed if a remote delivery caused a very long error message to be
+    recorded - for instance if somebody sent an entire SpamAssassin report back
+    as a large number of 550 error lines. This bug was coincidentally fixed by
+    increasing the size of one of Exim's internal buffers (big_buffer) that
+    happened as part of the Exiscan merge. However, to be on the safe side, I
+    have made the code more robust (and fixed the comments that describe what
+    is going on).
+
+33. Some experimental protocols are using DNS PTR records for new purposes. The
+    keys for these records are domain names, not reversed IP addresses. The
+    dnsdb PTR lookup now tests whether its key is an IP address. If not, it
+    leaves it alone. Component reversal etc. now happens only for IP addresses.
+    CAN-2005-0021
+
+34. The host_aton() function is supposed to be passed a string that is known
+    to be a valid IP address. However, in the case of IPv6 addresses, it was
+    not checking this. This is a hostage to fortune. Exim now panics and dies
+    if the condition is not met. A case was found where this could be provoked
+    from a dnsdb PTR lookup with an IPv6 address that had more than 8
+    components; fortuitously, this particular loophole had already been fixed
+    by change 4.50/55 or 4.44/33 above.
+
+    If there are any other similar loopholes, the new check in host_aton()
+    itself should stop them being exploited. The report I received stated that
+    data on the command line could provoke the exploit when Exim was running as
+    exim, but did not say which command line option was involved. All I could
+    find was the use of -be with a bad dnsdb PTR lookup, and in that case it is
+    running as the user.
+    CAN-2005-0021
+
+35. There was a buffer overflow vulnerability in the SPA authentication code
+    (which came originally from the Samba project). I have added a test to the
+    spa_base64_to_bits() function which I hope fixes it.
+    CAN-2005-0022
+
+36. The daemon start-up calls getloadavg() while still root for those OS that
+    need the first call to be done as root, but it missed one case: when
+    deliver_queue_load_max is set with deliver_drop_privilege. This is
+    necessary for the benefit of the queue runner, because there is no re-exec
+    when deliver_drop_privilege is set.
+
+37. Caching of lookup data for "hosts =" ACL conditions, when a named host list
+    was in use, was not putting the data itself into the right store pool;
+    consequently, it could be overwritten for a subsequent message in the same
+    SMTP connection. (Fix 4.40/11 dealt with the non-cache case, but overlooked
+    the caching.)
+
+38. Sometimes the final signoff response after QUIT could fail to get
+    transmitted in the non-TLS case. Testing !tls_active instead of tls_active
+    < 0 before doing a fflush(). This bug looks as though it goes back to the
+    introduction of TLS in release 3.20, but "sometimes" must have been rare
+    because the tests only now provoked it.
+
+
+Exim version 4.43
+-----------------
+
+ 1. Fixed a longstanding but relatively impotent bug: a long time ago, before
+    PIPELINING, the function smtp_write_command() used to return TRUE or FALSE.
+    Now it returns an integer. A number of calls were still expecting a T/F
+    return. Fortuitously, in all cases, the tests worked in OK situations,
+    which is the norm. However, things would have gone wrong on any write
+    failures on the smtp file descriptor. This function is used when sending
+    messages over SMTP and also when doing verify callouts.
+
+ 2. When Exim is called to do synchronous delivery of a locally submitted
+    message (the -odf or -odi options), it no longer closes stderr before doing
+    the delivery.
+
+ 3. Implemented the mua_wrapper option.
+
+ 4. Implemented mx_fail_domains and srv_fail_domains for the dnslookup router.
+
+ 5. Implemented the functions header_remove(), header_testname(),
+    header_add_at_position(), and receive_remove_recipient(), and exported them
+    to local_scan().
+
+ 6. If an ACL "warn" statement specified the addition of headers, Exim already
+    inserted X-ACL-Warn: at the start if there was no header name. However, it
+    was not making this test for the second and subsequent header lines if
+    there were newlines in the string. This meant that an invalid header could
+    be inserted if Exim was badly configured.
+
+ 7. Allow an ACL "warn" statement to add header lines at the start or after all
+    the Received: headers, as well as at the end.
+
+ 8. Added the rcpt_4xx retry error code.
+
+ 9. Added postmaster_mailfrom=xxx to callout verification option.
+
+10. Added mailfrom=xxxx to the callout verification option, for verify=
+    header_sender only.
+
+11. ${substr_1_:xxxx} and ${substr__3:xxxx} are now diagnosed as syntax errors
+    (they previously behaved as ${substr_1_0:xxxx} and ${substr:_0_3:xxxx}).
+
+12. Inserted some casts to stop certain compilers warning when using pointer
+    differences as field lengths or precisions in printf-type calls (mostly
+    affecting debugging statements).
+
+13. Added optional readline() support for -be (dynamically loaded).
+
+14. Obscure bug fix: if a message error (e.g. 4xx to MAIL) happened within the
+    same clock tick as a message's arrival, so that its received time was the
+    same as the "first fail" time on the retry record, and that message
+    remained on the queue past the ultimate address timeout, every queue runner
+    would try a delivery (because it was past the ultimate address timeout) but
+    after another failure, the ultimate address timeout, which should have then
+    bounced the address, did not kick in. This was a "< instead of <=" error;
+    in most cases the first failure would have been in the next clock tick
+    after the received time, and all would be well.
+
+15. The special items beginning with @ in domain lists (e.g. @mx_any) were not
+    being recognized when the domain list was tested by the match_domain
+    condition in an expansion string.
+
+16. Added the ${str2b64: operator.
+
+17. Exim was always calling setrlimit() to set a large limit for the number of
+    processes, without checking whether the existing limit was already
+    adequate. (It did check for the limit on file descriptors.) Furthermore,
+    errors from getrlimit() and setrlimit() were being ignored. Now they are
+    logged to the main and panic logs, but Exim does carry on, to try to do its
+    job under whatever limits there are.
+
+18. Imported PCRE 5.0.
+
+19. Trivial typo in log message " temporarily refused connection" (the leading
+    space).
+
+20. If the log selector return_path_on_delivery was set and an address was
+    redirected to /dev/null, the delivery process crashed because it assumed
+    that a return path would always be set for a "successful" delivery. In this
+    case, the whole delivery is bypassed as an optimization, and therefore no
+    return path is set.
+
+21. Internal re-arrangement: the function for sending a challenge and reading
+    a response while authentication was assuming a zero-terminated challenge
+    string. It's now changed to take a pointer and a length, to allow for
+    binary data in such strings.
+
+22. Added the cyrus_sasl authenticator (code supplied by MBM).
+
+23. Exim was not respecting finduser_retries when seeking the login of the
+    uid under which it was called; it was always trying 10 times. (The default
+    setting of finduser_retries is zero.) Also, it was sleeping after the final
+    failure, which is pointless.
+
+24. Implemented tls_on_connect_ports.
+
+25. Implemented acl_smtp_predata.
+
+26. If the domain in control=submission is set empty, Exim assumes that the
+    authenticated id is a complete email address when it generates From: or
+    Sender: header lines.
+
+27. Added "#define SOCKLEN_T int" to OS/os.h-SCO and OS/os.h-SCO_SV. Also added
+    definitions to OS/Makefile-SCO and OS/Makefile-SCO_SV that put basename,
+    chown and chgrp in /bin and hostname in /usr/bin.
+
+28. Exim was keeping the "process log" file open after each use, just as it
+    does for the main log. This opens the possibility of it remaining open for
+    long periods when the USR1 signal hits a daemon. Occasional processlog
+    errors were reported, that could have been caused by this. Anyway, it seems
+    much more sensible not to leave this file open at all, so that is what now
+    happens.
+
+29. The long-running daemon process does not normally write to the log once it
+    has entered its main loop, and it closes the log before doing so. This is
+    so that log files can straightforwardly be renamed and moved. However,
+    there are a couple of unusual error situations where the daemon does write
+    log entries, and I had neglected to close the log afterwards.
+
+30. The text of an SMTP error response that was received during a remote
+    delivery was being truncated at 512 bytes. This is too short for some of
+    the long messages that one sometimes sees. I've increased the limit to
+    1024.
+
+31. It is now possible to make retry rules that apply only when a message has a
+    specific sender, in particular, an empty sender.
+
+32. Added "control = enforce_sync" and "control = no_enforce_sync". This makes
+    it possible to be selective about when SMTP synchronization is enforced.
+
+33. Added "control = caseful_local_part" and "control = "caselower_local_part".
+
+32. Implemented hosts_connection_nolog.
+
+33. Added an ACL for QUIT.
+
+34. Setting "delay_warning=" to disable warnings was not working; it gave a
+    syntax error.
+
+35. Added mailbox_size and mailbox_filecount to appendfile.
+
+36. Added control = no_multiline_responses to ACLs.
+
+37. There was a bug in the logic of the code that waits for the clock to tick
+    in the case where the clock went backwards by a substantial amount such
+    that the microsecond fraction of "now" was more than the microsecond
+    fraction of "then" (but the whole seconds number was less).
+
+38. Added support for the libradius Radius client library this is found on
+    FreeBSD (previously only the radiusclient library was supported).
+
+
+Exim version 4.42
+-----------------
+
+ 1. When certain lookups returned multiple values in the form name=value, the
+    quoting of the values was not always being done properly. Specifically:
+    (a) If the value started with a double quote, but contained no whitespace,
+        it was not quoted.
+    (b) If the value contained whitespace other than a space character (i.e.
+        tabs or newlines or carriage returns) it was not quoted.
+    This fix has been applied to the mysql and pgsql lookups by writing a
+    separate quoting function and calling it from the lookup code. The fix
+    should probably also be applied to nisplus, ibase and oracle lookups, but
+    since I cannot test any of those, I have not disturbed their existing code.
+
+ 2. A hit in the callout cache for a specific address caused a log line with no
+    reason for rejecting RCPT. Now it says "Previous (cached) callout
+    verification failure".
+
+ 3. There was an off-by-one bug in the queryprogram router. An over-long
+    return line was truncated at 256 instead of 255 characters, thereby
+    overflowing its buffer with the terminating zero. As well as fixing this, I
+    have increased the buffer size to 1024 (and made a note to document this).
+
+ 4. If an interrupt, such as the USR1 signal that is send by exiwhat, arrives
+    when Exim is waiting for an SMTP response from a remote server, Exim
+    restarts its select() call on the socket, thereby resetting its timeout.
+    This is not a problem when such interrupts are rare. Somebody set up a cron
+    job to run exiwhat every 2 minutes, which is less than the normal select()
+    timeout (5 or 10 minutes). This meant that the select() timeout never
+    kicked in because it was always reset. I have fixed this by comparing the
+    time when an interrupt arrives with the time at the start of the first call
+    to select(). If more time than the timeout has elapsed, the interrupt is
+    treated as a timeout.
+
+ 5. Some internal re-factoring in preparation for the addition of Sieve
+    extensions (by MH). In particular, the "personal" test is moved to a
+    separate function, and given an option for scanning Cc: and Bcc: (which is
+    not set for Exim filters).
+
+ 6. When Exim created an email address using the login of the caller as the
+    local part (e.g. when creating a From: or Sender: header line), it was not
+    quoting the local part when it contained special characters such as @.
+
+ 7. Installed new OpenBSD configuration files.
+
+ 8. Reworded some messages for syntax errors in "and" and "or" conditions to
+    try to make them clearer.
+
+ 9. Callout options, other than the timeout value, were being ignored when
+    verifying sender addresses in header lines. For example, when using
+
+      verify = header_sender/callout=no_cache
+
+    the cache was (incorrectly) being used.
+
+10. Added a missing instance of ${EXE} to the exim_install script; this affects
+    only the Cygwin environment.
+
+11. When return_path_on_delivery was set as a log selector, if different remote
+    addresses in the same message used different return paths and parallel
+    remote delivery occurred, the wrong values would sometimes be logged.
+    (Whenever a remote delivery process finished, the return path value from
+    the most recently started remote delivery process was logged.)
+
+12. RFC 3848 specifies standard names for the "with" phrase in Received: header
+    lines when AUTH and/or TLS are in use. This is the "received protocol"
+    field. Exim used to use "asmtp" for authenticated SMTP, without any
+    indication (in the protocol name) for TLS use. Now it follows the RFC and
+    uses "esmtpa" if the connection is authenticated, "esmtps" if it is
+    encrypted, and "esmtpsa" if it is both encrypted and authenticated. These
+    names appear in log lines as well as in Received: header lines.
+
+13. Installed MH's patches for Sieve to add the "copy" and "vacation"
+    extensions, and comparison tests, and to fix some bugs.
+
+14. Changes to the "personal" filter test:
+
+    (1) The test was buggy in that it was just doing the equivalent of
+    "contains" tests on header lines. For example, if a user's address was
+    anne@some.where, the "personal" test would incorrectly be true for
+
+      To: susanne@some.where
+
+    This test is now done by extracting each address from the header in turn,
+    and checking the entire address. Other tests that are part of "personal"
+    are now done using regular expressions (for example, to check local parts
+    of addresses in From: header lines).
+
+    (2) The list of non-personal local parts in From: addresses has been
+    extended to include "listserv", "majordomo", "*-request", and "owner-*",
+    taken from the Sieve specification recommendations.
+
+    (3) If the message contains any header line starting with "List-" it is
+    treated as non-personal.
+
+    (4) The test for "circular" in the Subject: header line has been removed
+    because it now seems ill-conceived.
+
+15. Minor typos in src/EDITME comments corrected.
+
+16. Installed latest exipick from John Jetmore.
+
+17. If headers_add on a router specified a text string that was too long for
+    string_sprintf() - that is, longer than 8192 bytes - Exim panicked. The use
+    of string_sprintf() is now avoided.
+
+18. $message_body_size was not set (it was always zero) when running the DATA
+    ACL and the local_scan() function.
+
+19. For the "mail" command in an Exim filter, no default was being set for
+    the once_repeat time, causing a random time value to be used if "once" was
+    specified. (If the value happened to be <= 0, no repeat happened.) The
+    default is now 0s, meaning "never repeat". The "vacation" command was OK
+    (its default is 7d). It's somewhat surprising nobody ever noticed this bug
+    (I found it when inspecting the code).
+
+20. There is now an overall timeout for performing a callout verification. It
+    defaults to 4 times the callout timeout, which applies to individual SMTP
+    commands during the callout. The overall timeout applies when there is more
+    than one host that can be tried. The timeout is checked before trying the
+    next host. This prevents very long delays if there are a large number of
+    hosts and all are timing out (e.g. when the network connections are timing
+    out). The value of the overall timeout can be changed by specifying an
+    additional sub-option for "callout", called "maxwait". For example:
+
+      verify = sender/callout=5s,maxwait=20s
+
+21. Add O_APPEND to the open() call for maildirsize files (Exim already seeks
+    to the end before writing, but this should make it even safer).
+
+22. Exim was forgetting that it had advertised PIPELINING for the second and
+    subsequent messages on an SMTP connection. It was also not resetting its
+    memory on STARTTLS and an internal HELO.
+
+23. When Exim logs an SMTP synchronization error within a session, it now
+    records whether PIPELINING has been advertised or not.
+
+24. Added 3 instances of "(long int)" casts to time_t variables that were being
+    formatted using %ld, because on OpenBSD (and perhaps others), time_t is int
+    rather than long int.
+
+25. Installed the latest Cygwin configuration files from the Cygwin maintainer.
+
+26. Added the never_mail option to autoreply.
+
+
+Exim version 4.41
+-----------------
+
+ 1. A reorganization of the code in order to implement 4.40/8 caused a daemon
+    crash if the getsockname() call failed; this can happen if a connection is
+    closed very soon after it is established. The problem was simply in the
+    order in which certain operations were done, causing Exim to try to write
+    to the SMTP stream before it had set up the file descriptor. The bug has
+    been fixed by making things happen in the correct order.
+
+
+Exim version 4.40
+-----------------
+
+ 1. If "drop" was used in a DATA ACL, the SMTP output buffer was not flushed
+    before the connection was closed, thus losing the rejection response.
+
+ 2. Commented out the definition of SOCKLEN_T in os.h-SunOS5. It is needed for
+    some early Solaris releases, but causes trouble in current releases where
+    socklen_t is defined.
+
+ 3. When std{in,out,err} are closed, re-open them to /dev/null so that they
+    always exist.
+
+ 4. Minor refactoring of os.c-Linux to avoid compiler warning when IPv6 is not
+    configured.
+
+ 5. Refactoring in expand.c to improve memory usage. Pre-allocate a block so
+    that releasing the top of it at the end releases what was used for sub-
+    expansions (unless the block got too big). However, discard this block if
+    the first thing is a variable or header, so that we can use its block when
+    it is dynamic (useful for very large $message_headers, for example).
+
+ 6. Lookups now cache *every* query, not just the most recent. A new, separate
+    store pool is used for this. It can be recovered when all lookup caches are
+    flushed. Lookups now release memory at the end of their result strings.
+    This has involved some general refactoring of the lookup sources.
+
+ 7. Some code has been added to the store_xxx() functions to reduce the amount
+    of flapping under certain conditions.
+
+ 8. log_incoming_interface used to affect only the <= reception log lines. Now
+    it causes the local interface and port to be added to several more SMTP log
+    lines, for example "SMTP connection from", and rejection lines.
+
+ 9. The Sieve author supplied some patches for the doc/README.SIEVE file.
+
+10. Added a conditional definition of _BSD_SOCKLEN_T to os.h-Darwin.
+
+11. If $host_data was set by virtue of a hosts lookup in an ACL, its value
+    could be overwritten at the end of the current message (or the start of a
+    new message if it was set in a HELO ACL). The value is now preserved for
+    the duration of the SMTP connection.
+
+12. If a transport had a headers_rewrite setting, and a matching header line
+    contained an unqualified address, that address was qualified, even if it
+    did not match any rewriting rules. The underlying bug was that the values
+    of the flags that permit the existence of unqualified sender and recipient
+    addresses in header lines (set by {sender,recipient}_unqualified_hosts for
+    non-local messages, and by -bnq for local messages) were not being
+    preserved with the message after it was received.
+
+13. When Exim was logging an SMTP synchronization error, it could sometimes log
+    "next input=" as part of the text comprising the host identity instead of
+    the correct text. The code was using the same buffer for two different
+    strings. However, depending on which order the printing function evaluated
+    its arguments, the bug did not always show up. Under Linux, for example, my
+    test suite worked just fine.
+
+14. Exigrep contained a use of Perl's "our" scoping after change 4.31/70. This
+    doesn't work with some older versions of Perl. It has been changed to "my",
+    which in any case is probably the better facility to use.
+
+15. A really picky compiler found some instances of statements for creating
+    error messages that either had too many or two few arguments for the format
+    string.
+
+16. The size of the buffer for calls to the DNS resolver has been increased
+    from 1024 to 2048. A larger buffer is needed when performing PTR lookups
+    for addresses that have a lot of PTR records. This alleviates a problem; it
+    does not fully solve it.
+
+17. A dnsdb lookup for PTR records that receives more data than will fit in the
+    buffer now truncates the list and logs the incident, which is the same
+    action as happens when Exim is looking up a host name and its aliases.
+    Previously in this situation something unpredictable would happen;
+    sometimes it was "internal error: store_reset failed".
+
+18. If a server dropped the connection unexpectedly when an Exim client was
+    using GnuTLS and trying to read a response, the client delivery process
+    crashed while trying to generate an error log message.
+
+19. If a "warn" verb in an ACL added multiple headers to a message in a single
+    string, for example:
+
+      warn message = H1: something\nH2: something
+
+    the text was added as a single header line from Exim's point of view
+    though it ended up OK in the delivered message. However, searching for the
+    second and subsequent header lines using $h_h2: did not work. This has been
+    fixed. Similarly, if a system filter added multiple headers in this way,
+    the routers could not see them.
+
+20. Expanded the error message when iplsearch is called with an invalid key to
+    suggest using net-iplsearch in a host list.
+
+21. When running tests using -bh, any delays imposed by "delay" modifiers in
+    ACLs are no longer actually imposed (and a message to that effect is
+    output).
+
+22. If a "gecos" field in a passwd entry contained escaped characters, in
+    particular, if it contained a \" sequence, Exim got it wrong when building
+    a From: or a Sender: header from that name. A second bug also caused
+    incorrect handling when an unquoted " was present following a character
+    that needed quoting.
+
+23. "{crypt}" as a password encryption mechanism for a "crypteq" expansion item
+    was not being matched caselessly.
+
+24. Arranged for all hyphens in the exim.8 source to be escaped with
+    backslashes.
+
+25. Change 16 of 4.32, which reversed 71 or 4.31 didn't quite do the job
+    properly. Recipient callout cache records were still being keyed to include
+    the sender, even when use_sender was set false. This led to far more
+    callouts that were necessary. The sender is no longer included in the key
+    when use_sender is false.
+
+26. Added "control = submission" modifier to ACLs.
+
+27. Added the ${base62d: operator to decode base 62 numbers.
+
+28. dnsdb lookups can now access SRV records.
+
+29. CONFIGURE_OWNER can be set at build time to define an alternative owner for
+    the configuration file.
+
+30. The debug message "delivering xxxxxx-xxxxxx-xx" is now output in verbose
+    (-v) mode. This makes the output for a verbose queue run more intelligible.
+
+31. Added a use_postmaster feature to recipient callouts.
+
+32. Added the $body_zerocount variable, containing the number of binary zero
+    bytes in the message body.
+
+33. The time of last modification of the "new" subdirectory is now used as the
+    "mailbox time last read" when there is a quota error for a maildir
+    delivery.
+
+34. Added string comparison operators lt, lti, le, lei, gt, gti, ge, gei.
+
+35. Added +ignore_unknown as a special item in host lists.
+
+36. Code for decoding IPv6 addresses in host lists is now included, even if
+    IPv6 support is not being compiled. This fixes a bug in which an IPv6
+    address was recognized as an IP address, but was then not correctly decoded
+    into binary, causing unexpected and incorrect effects when compared with
+    another IP address.
+
+
+Exim version 4.34
+-----------------
+
+ 1. Very minor rewording of debugging text in manualroute to say "list of
+    hosts" instead of "hostlist".
+
+ 2. If verify=header_syntax was set, and a header line with an unqualified
+    address (no domain) and a large number of spaces between the end of the
+    name and the colon was received, the reception process suffered a buffer
+    overflow, and (when I tested it) crashed. This was caused by some obsolete
+    code that should have been removed. The fix is to remove it!
+
+ 3. When running in the test harness, delay a bit after writing a bounce
+    message to get a bit more predictability in the log output.
+
+ 4. Added a call to search_tidyup() just before forking a reception process. In
+    theory, someone could use a lookup in the expansion of smtp_accept_max_
+    per_host which, without the tidyup, could leave open a database connection.
+
+ 5. Added the variables $recipient_data and $sender_data which get set from a
+    lookup success in an ACL "recipients" or "senders" condition, or a router
+    "senders" option, similar to $domain_data and $local_part_data.
+
+ 6. Moved the writing of debug_print from before to after the "senders" test
+    for routers.
+
+ 7. Change 4.31/66 (moving the time when the Received: is generated) caused
+    problems for message scanning, either using a data ACL, or using
+    local_scan() because the Received: header was not generated till after they
+    were called (in order to set the time as the time of reception completion).
+    I have revised the way this works. The header is now generated after the
+    body is received, but before the ACL or local_scan() are called. After they
+    are run, the timestamp in the header is updated.
+
+
+Exim version 4.33
+-----------------
+
+ 1. Change 4.24/6 introduced a bug because the SIGALRM handler was disabled
+    before starting a queue runner without re-exec. This happened only when
+    deliver_drop_privilege was set or when the Exim user was set to root. The
+    effect of the bug was that timeouts during subsequent deliveries caused
+    crashes instead of being properly handled. The handler is now left at its
+    default (and expected) setting.
+
+ 2. The other case in which a daemon avoids a re-exec is to deliver an incoming
+    message, again when deliver_drop_privilege is set or Exim is run as root.
+    The bug described in (1) was not present in this case, but the tidying up
+    of the other signals was missing. I have made the two cases consistent.
+
+ 3. The ignore_target_hosts setting on a manualroute router was being ignored
+    for hosts that were looked up using the /MX notation.
+
+ 4. Added /ignore=<ip list> feature to @mx_any, @mx_primary, and @mx_secondary
+    in domain lists.
+
+ 5. Change 4.31/55 was buggy, and broke when there was a rewriting rule that
+    operated on the sender address. After changing the $sender_address to <>
+    for the sender address verify, Exim was re-instated it as the original
+    (before rewriting) address, but remembering that it had rewritten it, so it
+    wasn't rewriting it again. This bug also had the effect of breaking the
+    sender address verification caching when the sender address was rewritten.
+
+ 6. The ignore_target_hosts option was being ignored by the ipliteral router.
+    This has been changed so that if the ip literal address matches
+    ignore_target_hosts, the router declines.
+
+ 7. Added expansion conditions match_domain, match_address, and match_local_
+    part (NOT match_host).
+
+ 8. The placeholder for the Received: header didn't have a length field set.
+
+ 9. Added code to Exim itself and to exim_lock to test for a specific race
+    condition that could lead to file corruption when using MBX delivery. The
+    issue is with the lockfile that is created in /tmp. If this file is removed
+    after a process has opened it but before that process has acquired a lock,
+    there is the potential for a second process to recreate the file and also
+    acquire a lock. This could lead to two Exim processes writing to the file
+    at the same time. The added code performs the same test as UW imapd; it
+    checks after acquiring the lock that its file descriptor still refers to
+    the same named file.
+
+10. The buffer for building added header lines was of fixed size, 8192 bytes.
+    It is now parameterized by HEADER_ADD_BUFFER_SIZE and this can be adjusted
+    when Exim is built.
+
+11. Added the smtp_active_hostname option. If used, this will typically be made
+    to depend on the incoming interface address. Because $interface_address is
+    not set up until the daemon has forked a reception process, error responses
+    that can happen earlier (such as "too many connections") no longer contain
+    a host name.
+
+12. If an expansion in a condition on a "warn" statement fails because a lookup
+    defers, the "warn" statement is abandoned, and the next ACL statement is
+    processed. Previously this caused the whole ACL to be aborted.
+
+13. Added the iplsearch lookup type.
+
+14. Added ident_timeout as a log selector.
+
+15. Added tls_certificate_verified as a log selector.
+
+16. Added a global option tls_require_ciphers (compare the smtp transport
+    option of the same name). This controls incoming TLS connections.
+
+17. I finally figured out how to make tls_require_ciphers do a similar thing
+    in GNUtls to what it does in OpenSSL, that is, set up an appropriate list
+    before starting the TLS session.
+
+18. Tabs are now shown as \t in -bP output.
+
+19. If the log selector return_path_on_delivery was set, Exim crashed when
+    bouncing a message because it had too many Received: header lines.
+
+20. If two routers both had headers_remove settings, and the first one included
+    a superfluous trailing colon, the final name in the first list and the
+    first name in the second list were incorrectly joined into one item (with a
+    colon in the middle).
+
+
+Exim version 4.32
+-----------------
+
+ 1. Added -C and -D options to the exinext utility, mainly to make it easier
+    to include in the automated testing, but these could be helpful when
+    multiple configurations are in use.
+
+ 2. The exinext utility was not formatting the output nicely when there was
+    an alternate port involved in the retry record key, nor when there was a
+    message id as well (for retries that were specific to a specific message
+    and a specific host). It was also confused by IPv6 addresses, because of
+    the additional colons they contain. I have fixed the IPv4 problem, and
+    patched it up to do a reasonable job for IPv6.
+
+ 3. When there is an error after a MAIL, RCPT, or DATA SMTP command during
+    delivery, the log line now contains "pipelined" if PIPELINING was used.
+
+ 4. An SMTP transport process used to panic and die if the bind() call to set
+    an explicit outgoing interface failed. This has been changed; it is now
+    treated in the same way as a connect() failure.
+
+ 5. A reference to $sender_host_name in the part of a conditional expansion
+    that was being skipped was still causing a DNS lookup. This no longer
+    occurs.
+
+ 6. The def: expansion condition was not recognizing references to header lines
+    that used bh_ and bheader_.
+
+ 7. Added the _cache feature to named lists.
+
+ 8. The code for checking quota_filecount in the appendfile transport was
+    allowing one more file than it should have been.
+
+ 9. For compatibility with Sendmail, the command line option
+
+      -prval:sval
+
+    is equivalent to
+
+      -oMr rval -oMs sval
+
+    and sets the incoming protocol and host name (for trusted callers). The
+    host name and its colon can be omitted when only the protocol is to be set.
+    Note the Exim already has two private options, -pd and -ps, that refer to
+    embedded Perl. It is therefore impossible to set a protocol value of "d" or
+    "s", but I don't think that's a major issue.
+
+10. A number of refactoring changes to the code, none of which should affect
+    Exim's behaviour:
+
+    (a) The number of logging options was getting close to filling up the
+    32-bit word that was used as a bit map. I have split them into two classes:
+    those that are passed in the argument to log_write(), and those that are
+    only ever tested independently outside of that function. These are now in
+    separate 32-bit words, so there is plenty of room for expansion again.
+    There is no change in the user interface or the logging behaviour.
+
+    (b) When building, for example, log lines, the code previously used a
+    macro that called string_cat() twice, in order to add two strings. This is
+    not really sufficiently general. Furthermore, there was one instance where
+    it was actually wrong because one of the argument was used twice, and in
+    one call a function was used. (As it happened, calling the function twice
+    did not affect the overall behaviour.) The macro has been replaced by a
+    function that can join an arbitrary number of extra strings onto a growing
+    string.
+
+    (c) The code for expansion conditions now uses a table and a binary chop
+    instead of a serial search (which was left over from when there were very
+    few conditions). Also, it now recognizes conditions like "pam" even when
+    the relevant support is not compiled in: a suitably worded error message is
+    given if an attempt is made to use such a condition.
+
+11. Added ${time_interval:xxxxx}.
+
+12. A bug was causing one of the ddress fields not to be passed back correctly
+    from remote delivery subprocesses. The field in question was not being
+    subsequently used, so this caused to problems in practice.
+
+13. Added new log selectors queue_time and deliver_time.
+
+14. Might have fixed a bug in maildirsizefile handling that threw up
+    "unexpected character" debug warnings, and recalculated the data
+    unnecessarily. In any case, I expanded the warning message to give more
+    information.
+
+15. Added the message "Restricted characters in address" to the statements in
+    the default ACL that block characters like @ and % in local parts.
+
+16. Change 71 for release 4.31 proved to be much less benign that I imagined.
+    Three changes have been made:
+
+    (a) There was a serious bug; a negative response to MAIL caused the whole
+        recipient domain to be cached as invalid, thereby blocking all messages
+        to all local parts at the same domain, from all senders. This bug has
+        been fixed. The domain is no longer cached after a negative response to
+        MAIL if the sender used is not empty.
+
+    (b) The default behaviour of using MAIL FROM:<> for recipient callouts has
+        been restored.
+
+    (c) A new callout option, "use_sender" has been added for people who want
+        the modified behaviour.
+
+
+Exim version 4.31
+-----------------
+
+ 1. Removed "EXTRALIBS=-lwrap" from OS/Makefile-Unixware7 on the advice of
+    Larry Rosenman.
+
+ 2. Removed "LIBS = -lresolv" from OS/Makefile-Darwin as it is not needed, and
+    indeed breaks things for older releases.
+
+ 3. Added additional logging to the case where there is a problem reading data
+    from a filter that is running in a subprocess using a pipe, in order to
+    try to track down a specific problem.
+
+ 4. Testing facility fudge: when running in the test harness and attempting
+    to connect to 10.x.x.x (expecting a connection timeout) I'm now sometimes
+    getting "No route to host". Convert this to a timeout.
+
+ 5. Define ICONV_ARG2_TYPE as "char **" for Unixware7 to avoid compiler
+    warning.
+
+ 6. Some OS don't have socklen_t but use size_t instead. This affects the
+    fifth argument of getsockopt() amongst other things. This is now
+    configurable by a macro called SOCKLEN_T which defaults to socklen_t, but
+    can be set for individual OS. I have set it for SunOS5, OSF1, and
+    Unixware7. Current versions of SunOS5 (aka Solaris) do have socklen_t, but
+    some earlier ones do not.
+
+ 7. Change 4.30/15 was not doing the test caselessly.
+
+ 8. The standard form for an IPv6 address literal was being rejected by address
+    parsing in, for example, MAIL and RCPT commands. An example of this kind of
+    address is [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
+    this, as well as the form without the "IPv6" on the front (but only when
+    address literals are enabled, of course).
+
+ 9. Added some casts to avoid compiler warnings in OS/os.c-Linux.
+
+10. Exim crashed if a message with an empty sender address specified by -f
+    encountered a router with an errors_to setting. This could be provoked only
+    by a command such as
+
+      exim -f "" ...
+
+    where an empty string was supplied; "<>" did not hit this bug.
+
+11. Installed PCRE release 4.5.
+
+12. If EHLO/HELO was rejected by an ACL, the value of $sender_helo_name
+    remained set. It is now erased.
+
+13. exiqgrep wasn't working on MacOS X because it didn't correctly compute
+    times from message ids (which are base 36 rather than the normal 62).
+
+14. "Expected" SMTP protocol errors that can arise when PIPELINING is in use
+    were being counted as actual protocol errors, and logged if the log
+    selector +smtp_protocol_error was set. One cannot be perfect in this test,
+    but now, if PIPELINING has been advertised, RCPT following a rejected MAIL,
+    and DATA following a set of rejected RCPTs do not count as protocol errors.
+    In other words, Exim assumes they were pipelined, though this may not
+    actually be the case. Of course, in all cases the client gets an
+    appropriate error code.
+
+15. If a lookup fails in an ACL condition, a message about the failure may
+    be available; it is used if testing the ACL cannot continue, because most
+    such messages specify what the cause of the deferral is. However, some
+    messages (e.g. "MYSQL: no data found") do not cause a defer. There was bug
+    that caused an old message to be retained and used if a later statement
+    caused a defer, replacing the real cause of the deferral.
+
+16. If an IP address had so many PTR records that the DNS lookup buffer
+    was not large enough to hold them, Exim could crash while trying to process
+    the truncated data. It now detects and logs this case.
+
+17. Further to 4.21/58, another change has been made: if (and only if) the
+    first line of a message (the first header line) ends with CRLF, a bare LF
+    in a subsequent header line has a space inserted after it, so as not to
+    terminate the header.
+
+18. Refactoring: tidied an ugly bit of code in appendfile that copied data
+    unnecessarily, used atoi() instead of strtol(), and didn't check the
+    termination when getting file sizes from file names by regex.
+
+19. Completely re-implemented the support for maildirsize files, in the light
+    of a number of problems with the previous contributed implementation
+    (4.30/29). In particular:
+
+    . If the quota is zero, the maildirsize file is maintained, but no quota is
+      imposed.
+
+    . If the maildir directory does not exist, it is created before any attempt
+      to write a maildirsize file.
+
+    . The quota value in the file is just a cache; if the quota is changed in
+      the transport, the new value overrides.
+
+    . A regular expression is available for excluding directories from the
+      count.
+
+20. The autoreply transport checks the characters in options that define the
+    message's headers; it allows continued headers, but it was checking with
+    isspace() after an embedded newline instead of explicitly looking for a
+    space or a tab.
+
+21. If all the "regular" hosts to which an address was routed had passed their
+    expiry times, and had not reached their retry times, the address was
+    bounced, even if fallback hosts were defined. Now Exim should go on to try
+    the fallback hosts.
+
+22. Increased buffer sizes in the callout code from 1024 to 4096 to match the
+    equivalent code in the SMTP transport. Some hosts send humungous responses
+    to HELO/EHLO, more than 1024 it seems.
+
+23. Refactoring: code in filter.c used (void *) for "any old type" but this
+    gives compiler warnings in some environments. I've now done it "properly",
+    using a union.
+
+24. The replacement for inet_ntoa() that is used with gcc on IRIX systems
+    (because of problems with the built-in one) was declared to return uschar *
+    instead of char *, causing compiler failure.
+
+25. Fixed a file descriptor leak when processing alias/forward files.
+
+26. Fixed a minor format string issue in dbfn.c.
+
+27. Typo in exim.c: ("dmbnz" for "dbmnz").
+
+28. If a filter file refered to $h_xxx or $message_headers, and the headers
+    contained RFC 2047 "words", Exim's memory could, under certain conditions,
+    become corrupted.
+
+29. When a sender address is verified, it is cached, to save repeating the test
+    when there is more than one recipient in a message. However, when the
+    verification involves a callout, it is possible for different callout
+    options to be set for different recipients. It is too complicated to keep
+    track of this in the cache, so now Exim always runs a verification when a
+    callout is required, relying on the callout cache for the optimization.
+    The overhead is duplication of the address routing, but this should not be
+    too great.
+
+30. Fixed a bug in callout caching. If a RCPT command caused the sender address
+    to be verified with callout=postmaster, and the main callout worked but the
+    postmaster check failed, the verification correctly failed. However, if a
+    subsequent RCPT command asked for sender verification *without* the
+    postmaster check, incorrect caching caused this verification also to fail,
+    incorrectly.
+
+31. Exim caches DNS lookup failures so as to avoid multiple timeouts; however,
+    it was not caching the DNS options (qualify_single, search_parents) that
+    were used when the lookup failed. A subsequent lookup with different
+    options therefore always gave the same answer, though there were cases
+    where it should not have. (Example: a "domains = !$mx_any" option on a
+    dnslookup router: the "domains" option is always processed without any
+    widening, but the router might have qualify_single set.) Now Exim uses the
+    cached value only when the same options are set.
+
+32. Added John Jetmore's "exipick" utility to the distribution.
+
+33. GnuTLS: When an attempt to start a TLS session fails for any reason other
+    than a timeout (e.g. a certificate is required, and is not provided), an
+    Exim server now closes the connection immediately. Previously it waited for
+    the client to close - but if the client is SSL, it seems that they each
+    wait for each other, leading to a delay before one of them times out.
+
+34: GnuTLS: Updated the code to use the new GnuTLS 1.0.0 API. I have not
+    maintained 0.8.x compatibility because I don't think many are using it, and
+    it is clearly obsolete.
+
+35. Added TLS support for CRLs: a tls_crl global option and one for the smtp
+    transport.
+
+36. OpenSSL: $tls_certificate_verified was being set to 1 even if the
+    client certificate was expired. A simple patch fixes this, though I don't
+    understand the full logic of why the verify callback is called multiple
+    times.
+
+37. OpenSSL: a patch from Robert Roselius: "Enable client-bug workaround.
+    Versions of OpenSSL as of 0.9.6d include a 'CBC countermeasure' feature,
+    which causes problems with some clients (such as the Certicom SSL Plus
+    library used by Eudora). This option, SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS,
+    disables the coutermeasure allowing Eudora to connect."
+
+38. Exim was not checking that a write() to a log file succeeded. This could
+    lead to Bad Things if a log got too big, in particular if it hit a file
+    size limit. Exim now panics and dies if it cannot write to a log file, just
+    as it does if it cannot open a log file.
+
+39. Modified OS/Makefile-Linux so that it now contains
+
+      CFLAGS=-O -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
+
+    The two -D definitions ensure that Exim is compiled with large file
+    support, which makes it possible to handle log files that are bigger than
+    2^31.
+
+40. Fixed a subtle caching bug: if (in an ACL or a set of routers, for
+    instance) a domain was checked against a named list that involved a lookup,
+    causing $domain_data to be set, then another domain was checked against the
+    same list, then the first domain was re-checked, the value of $domain_data
+    after the final check could be wrong. In particular, if the second check
+    failed, it could be set empty. This bug probably also applied to
+    $local_part_data.
+
+41. The strip_trailing_dot option was not being applied to the address given
+    with the -f command-line option.
+
+42. The code for reading a message's header from the spool was incrementing
+    $received_count, but never initializing it. This meant that the value was
+    incorrect (doubled) while delivering a message in the same process in which
+    it was received. In the most common configuration of Exim, this never
+    happens - a fresh exec is done - but it can happen when
+    deliver_drop_privilege is set.
+
+43. When Exim logs an SMTP synchronization error - client data sent too soon -
+    it now includes up to 150 characters of the unexpected data in the log
+    line.
+
+44. The exim_dbmbuild utility uses fixed size buffers for reading input lines
+    and building data strings. The size of both of these buffers was 10 000
+    bytes - far larger than anybody would *ever* want, thought I. Needless to
+    say, somebody hit the limit. I have increased the maximum line length to
+    20 000 and the maximum data length of concatenated lines to 100 000. I have
+    also fixed two bugs, because there was no checking on these buffers. Tsk,
+    tsk. Now exim_dbmbuild gives a message and exits with an error code if a
+    buffer is too small.
+
+45. The exim_dbmbuild utility did not support quoted keys, as Exim does in
+    lsearch lookups. Now it does.
+
+46. When parsing a route_list item in a manualroute router, a fixed-length
+    buffer was used for the list of hosts. I made this 1024 bytes long,
+    thinking that nobody would ever have a list of hosts that long. Wrong.
+    Somebody had a whole pile of complicated expansion conditions, and the
+    string was silently truncated, leading to an expansion error. It turns out
+    that it is easier to change to an unlimited length (owing to other changes
+    that have happened since this code was originally written) than to build
+    structure for giving a limitation error. The length of the item that
+    expands into the list of hosts is now unlimited.
+
+47. The lsearch lookup could not handle data where the length of text line was
+    more than 4095 characters. Such lines were truncated, leading to shortened
+    data being returned. It should now handle lines of any length.
+
+48. Minor wording revision: "cannot test xxx in yyy ACL" becomes "cannot test
+    xxx condition in yyy ACL" (e.g. "cannot test domains condition in DATA
+    ACL").
+
+49. Cosmetic tidy to scripts like exicyclog that are generated by globally
+    replacing strings such as BIN_DIRECTORY in a source file: the replacement
+    no longer happens in comment lines. A list of replacements is now placed
+    at the head of all of the source files, except those whose only change is
+    to replace PERL_COMMAND in the very first #! line.
+
+50. Replaced the slow insertion sort in queue.c, for sorting the list of
+    messages on the queue, with a bottom-up merge sort, using code contributed
+    by Michael Haardt. This should make operations like -bp somewhat faster on
+    large queues. It won't affect queue runners, except when queue_run_in_order
+    is set.
+
+51. Installed eximstats 1.31 in the distribution.
+
+52. Added support for SRV lookups to the dnslookup router.
+
+53. If an ACL referred to $message_body or $message_body_end, the value was not
+    reset for any messages that followed in the same SMTP session.
+
+54. The store-handling optimization for building very long strings was not
+    differentiating between the different store pools. I don't think this
+    actually made any difference in practice, but I've tidied it.
+
+55. While running the routers to verify a sender address, $sender_address
+    was still set to the sender address. This is wrong, because when routing to
+    send a bounce to the sender, it would be empty. Therefore, I have changed
+    it so that, while verifying a sender address, $sender_address is set to <>.
+    (There is no change to what happens when verifying a recipient address.)
+
+56. After finding MX (or SRV) records, Exim was doing a DNS lookup for the
+    target A or AAAA records (if not already returned) without resetting the
+    qualify_single or search_parents options of the DNS resolver. These are
+    inappropriate in this case because the targets of MX and SRV records must
+    be FQDNs. A broken DNS record could cause trouble if it happened to have a
+    target that, when qualified, matched something in the local domain. These
+    two options are now turned off when doing these lookups.
+
+57. It seems that at least some releases of Reiserfs (which does not have the
+    concept of a fixed number of inodes) returns zero and not -1 for the
+    number of available inodes. This interacted badly with check_spool_inodes,
+    which assumed that -1 was the "no such thing" setting. What I have done is
+    to check that the total number of inodes is greater than zero before doing
+    the test of how many are available.
+
+58. When a "warn" ACL statement has a log_message modifier, the message is
+    remembered, and not repeated. This is to avoid a lot of repetition when a
+    message has many recipients that cause the same warning to be written.
+    However, Exim was preserving the list of already written lines for an
+    entire SMTP session, which doesn't seem right. The memory is now reset if a
+    new message is started.
+
+59. The "rewrite" debugging flag was not showing the result of rewriting in the
+    debugging output unless log_rewrite was also set.
+
+60. Avoid a compiler warning on 64-bit systems in dsearch.c by avoiding the use
+    of (int)(handle) when we know that handle contains (void *)(-1).
+
+61. The Exim daemon panic-logs an error return when it closes the incoming
+    connection. However "connection reset by peer" seems to be common, and
+    isn't really an error worthy of noting specially, so that particular error
+    is no long logged.
+
+62. When Exim is trying to find all the local interfaces, it used to panic and
+    die if the ioctl to get the interface flags failed. However, it seems that
+    on at least one OS (Solaris 9) it is possible to have an interface that is
+    included in the list of interfaces, but for which you get a failure error
+    for this call. This happens when the interface is not "plumbed" into a
+    protocol (i.e. neither IPv4 nor IPv6). I've changed the code so that a
+    failure of the "get flags" call assumes that the interface is down.
+
+63. Added a ${eval10: operator, which assumes all numbers are decimal. This
+    makes life easier for people who are doing arithmetic on fields extracted
+    from dates, where you often get leading zeros that should not be
+    interpreted as octal.
+
+64. Added qualify_domain to the redirect router, to override the global
+    setting.
+
+65. If a pathologically long header line contained very many addresses (the
+    report of this problem mentioned 10 000) and each of them was rewritten,
+    Exim could use up a very large amount of memory. (It kept on making new
+    copies of the header line as it rewrote, and never released the old ones.)
+    At the expense of a bit more processing, the header rewriting function has
+    been changed so that it no longer eats memory in this way.
+
+66. The generation of the Received: header has been moved from the time that a
+    message starts to be received, to the time that it finishes. The timestamp
+    in the Received: header should now be very close to that of the <= log
+    line. There are two side-effects of this change:
+
+    (a) If a message is rejected by a DATA or non-SMTP ACL or local_scan(), the
+        logged header lines no longer include the local Received: line, because
+        it has not yet been created. The same applies to a copy of the message
+        that is returned to a non-SMTP sender when a message is rejected.
+
+    (b) When a filter file is tested using -bf, no additional Received: header
+        is added to the test message. After some thought, I decided that this
+        is a bug fix.
+
+    This change does not affect the value of $received_for. It is still set
+    after address rewriting, but before local_scan() is called.
+
+67. Installed the latest Cygwin-specific files from the Cygwin maintainer.
+
+68. GnuTLS: If an empty file is specified for tls_verify_certificates, GnuTLS
+    gave an unhelpful panic error message, and a defer error. I have managed to
+    change this behaviour so that it now rejects any supplied certificate,
+    which seems right, as the list of acceptable certificates is empty.
+
+69. OpenSSL: If an empty file is specified for tls_verify_certificates, OpenSSL
+    gave an unhelpful defer error. I have not managed to make this reject any
+    supplied certificates, but the error message it gives is "no certificate
+    supplied", which is not helpful.
+
+70. exigrep's output now also includes lines that are not associated with any
+    message, but which match the given pattern. Implemented by a patch from
+    Martin Sluka, which also tidied up the Perl a bit.
+
+71. Recipient callout verification, like sender verification, was using <> in
+    the MAIL FROM command. This isn't really the right thing, since the actual
+    sender may affect whether the remote host accepts the recipient or not. I
+    have changed it to use the actual sender in the callout; this means that
+    the cache record is now keyed on a recipient/sender pair, not just the
+    recipient address. There doesn't seem to be a real danger of callout loops,
+    since a callout by the remote host to check the sender would use <>.
+    [SEE ABOVE: changed after hitting problems.]
+
+72. Exim treats illegal SMTP error codes that do not begin with 4 or 5 as
+    temporary errors. However, in the case of such a code being given after
+    the end of a data transmission (i.e. after ".") Exim was failing to write
+    a retry record for the message. (Yes, there was some broken host that was
+    actually sending 8xx at this point.)
+
+73. An unknown lookup type in a host list could cause Exim to panic-die when
+    the list was checked. (An example that provoked this was putting <; in the
+    middle of a list instead of at the start.) If this happened during a DATA
+    ACL check, a -D file could be left lying around. This kind of configuration
+    error no longer causes Exim to die; instead it causes a defer error. The
+    incident is still logged to the main and panic logs.
+
+74. Buglet left over from Exim 3 conversion. The message "too many messages
+    in one connection" was written to the rejectlog but not the mainlog, except
+    when address rewriting (yes!) was being logged.
+
+75. Added write_rejectlog option.
+
+76. When a system filter was run not as root (that is, when system_filter_user
+    was set), the values of the $n variables were not being returned to the
+    main process; thus, they were not subsequently available in the $sn
+    variables.
+
+77. Added +return_path_on_delivery log selector.
+
+78. A connection timeout was being treated differently from recipients deferred
+    when testing hosts_max_try with a message that was older than the host's
+    retry timeout. (The host should not be counted, thus allowing all hosts to
+    be tried at least once before bouncing.) This may have been the cause of an
+    occasionally reported bug whereby a message would remain on the queue
+    longer than the retry timeout, but would be bounced if a delivery was
+    forced. I say "may" because I never totally pinned down the problem;
+    setting up timeout/retry tests is difficult. See also the next item.
+
+79. The ultimate address timeout was not being applied to errors that involved
+    a combination of host plus message (for example, a timeout on a MAIL
+    command). When an address resolved to a number of possible hosts, and they
+    were not all tried for each delivery (e.g. because of hosts_max_try), a
+    message could remain on the queue longer than the retry timeout.
+
+80. Sieve bug: "stop" inside "elsif" was broken. Applied a patch from Michael
+    Haardt.
+
+81. Fixed an obscure SMTP outgoing bug which required at least the following
+    conditions: (a) there was another message waiting for the same server;
+    (b) the server returned 5xx to all RCPT commands in the first message so
+    that the message was not completed; (c) the server dropped the connection
+    or gave a negative response to the RSET that Exim sends to abort the
+    transaction. The observed case was a dropped connection after DATA that had
+    been sent in pipelining mode. That is, the server had advertised PIPELINING
+    but was not implementing it correctly. The effect of the bug was incorrect
+    behaviour, such as trying another host, and this could lead to a crash.
+
+
+Exim version 4.30
+-----------------
+
+ 1. The 3rd arguments to getsockname(), getpeername(), and accept() in exim.c
+    and daemon.c were passed as pointers to ints; they should have been
+    pointers to socklen_t variables (which are typically unsigned ints).
+
+ 2. Some signed/unsigned type warnings in the os.c file for Linux have been
+    fixed.
+
+ 3. Fixed a really odd bug that affected only the testing scheme; patching a
+    certain fixed string in the binary changed the value of another string that
+    happened to be identical to the end of the original first string.
+
+ 4. When gethostbyname() (or equivalent) is passed an IP address as a "host
+    name", it returns that address as the IP address. On some operating
+    systems (e.g. Solaris), it also passes back the IP address string as the
+    "host name". However, on others (e.g. Linux), it passes back an empty
+    string. Exim wasn't checking for this, and was changing the host name to an
+    empty string, assuming it had been canonicalized.
+
+ 5. Although rare, it is permitted to have more than one PTR record for a given
+    IP address. I thought that gethostbyaddr() or getipnodebyaddr() always gave
+    all the names associated with an address, because they do in Solaris.
+    However, it seems that they do not in Linux for data that comes from the
+    DNS. If an address in /etc/hosts has multiple names, they _are_ all given.
+    I found this out when I moved to a new Linux workstation and tried to run
+    the Exim test suite.
+
+    To get round this problem I have changed the code so that it now does its
+    own call to the DNS to look up PTR records when searching for a host name.
+    If nothing can be found in the DNS, it tries gethostbyaddr(), so that
+    addresses that are only in /etc/hosts are still found.
+
+    This behaviour is, however, controlled by an option called host_lookup_
+    order, which defaults to "bydns:byaddr". If people want to use the other
+    order, or indeed, just use one or the other means of lookup, they can
+    specify it in this variable.
+
+ 6. If a PTR record yields an empty name, Exim treats it as non-existent. In
+    some operating systems, this comes back from gethostbyaddr() as an empty
+    string, and this is what Exim used to test for. However, it seems that in
+    other systems, "." is yielded. Exim now tests for this case too.
+
+ 7. The values of check_spool_space and check_log_space are now held internally
+    as a number of kilobytes instead of an absolute number of bytes. If a
+    numbers is specified without 'K' or 'M', it is rounded up to the nearest
+    kilobyte. This means that much larger values can be stored.
+
+ 8. Exim monitor: an attempt to get the action menu when not actually pointing
+    at a message produces an empty menu entitled "No message selected". This
+    works on Solaris (OpenWindows). However, XFree86 does not like a menu with
+    no entries in it ("Shell widget menu has zero width and/or height"). So I
+    have added a single, blank menu entry in this case.
+
+ 9. Added ${quote_local_part.
+
+10. MIME decoding is now applied to the contents of Subject: header lines when
+    they are logged.
+
+11. Now that a reference to $sender_host_address automatically causes a reverse
+    lookup to occur if necessary (4.13/18), there is no need to arrange for a
+    host lookup before query-style lookups in lists that might use this
+    variable. This has therefore been abolished, and the "net-" prefix is no
+    longer necessary for query-style lookups.
+
+12. The Makefile for SCO_SV contained a setting of LDFLAGS. This appears to
+    have been a typo for LFLAGS, so it has been changed.
+
+13. The install script calls Exim with "-C /dev/null" in order to find the
+    version number. If ALT_CONFIG_PREFIX was set, this caused an error message
+    to be output. However, since Exim outputs its version number before the
+    error, it didn't break the script. It just looked ugly. I fixed this by
+    always allowing "-C /dev/null" if the caller is root.
+
+14. Ignore overlarge ACL variable number when reading spool file - insurance
+    against a later release with more variables having written the file.
+
+15. The standard form for an IPv6 address literal was being rejected by EHLO.
+    Example: [IPv6:2002:c1ed:8229:10:202:2dff:fe07:a42a]. Exim now accepts
+    this, as well as the form without the "IPv6" on the front.
+
+16. Added CHOWN_COMMAND=/usr/sbin/chown and LIBS=-lresolv to the
+    OS/Makefile-Darwin file.
+
+17. Fixed typo in lookups/ldap.c: D_LOOKUP should be D_lookup. This applied
+    only to LDAP libraries that do not have LDAP_OPT_DEREF.
+
+18. After change 4.21/52, "%ld" was used to format the contents of the $inode
+    variable. However, some OS use ints for inodes. I've added cast to long int
+    to get rid of the compiler warning.
+
+19. I had forgotten to lock out "/../" in configuration file names when
+    ALT_CONFIG_PREFIX was set.
+
+20. Routers used for verification do not need to specify transports. However,
+    if such a router generated a host list, and callout was configured, Exim
+    crashed, because it could not find a port number from the (non-existent)
+    transport. It now assumes port 25 in this circumstance.
+
+21. Added the -t option to exigrep.
+
+22. If LOOKUP_LSEARCH is defined, all three linear search methods (lsearch,
+    wildlsearch, nwildlsearch) are compiled. LOOKUP_WILDLSEARCH and LOOKUP_
+    NWILDLSEARCH are now obsolete, but retained for compatibility. If either of
+    them is set, LOOKUP_LSEARCH is forced.
+
+23. "exim -bV" now outputs a list of lookups that are included in the binary.
+
+24. Added sender and host information to the "rejected by local_scan()" log
+    line; previously there was no indication of these.
+
+25. Added .include_if_exists.
+
+26. Change 3.952/11 added an explicit directory sync on top of a file sync for
+    Linux. It turns out that not all file systems support this. Apparently some
+    versions of NFS do not. (It's rare to put Exim's spool on NFS, but people
+    do it.) To cope with this, the error EINVAL, which means that sync-ing is
+    not supported on the file descriptor, is now ignored when Exim is trying to
+    sync a directory. This applies only to Linux.
+
+27. Added -DBIND_8_COMPAT to the CLFAGS setting for Darwin.
+
+28. In Darwin (MacOS X), the PAM headers are in /usr/include/pam and not in
+    /usr/include/security. There's now a flag in OS/os.h-Darwin to cope with
+    this.
+
+29. Added support for maildirsize files from supplied patch (modified a bit).
+
+30. The use of :fail: followed by an empty string could lead Exim to respond to
+    sender verification failures with (e.g.):
+
+      550 Verification failed for <xxx>
+      550 Sender verify failed
+
+    where the first response line was missing the '-' that indicates it is not
+    the final line of the response.
+
+31. The loop for finding the name of the user that called Exim had a hardwired
+    limit of 10; it now uses the value of finduser_retries, which is used for
+    all other user lookups.
+
+32. Added $received_count variable, available in data and not_smtp ACLs, and at
+    delivery time.
+
+33. Exim was neglecting to zero errno before one call of strtol() when
+    expanding a string and expecting an integer value. On some systems this
+    resulted in spurious "integer overflow" errors. Also, it was casting the
+    result into an int without checking.
+
+34. Testing for a connection timeout using "timeout_connect" in the retry rules
+    did not work. The code looks as if it has *never* worked, though it appears
+    to have been documented since at least release 1.62. I have made it work.
+
+35. The "timeout_DNS" error in retry rules, also documented since at least
+    1.62, also never worked. As it isn't clear exactly what this means, and
+    clearly it isn't a major issue, I have abolished the feature by treating it
+    as "timeout", and writing a warning to the main and panic logs.
+
+36. The display of retry rules for -brt wasn't always showing the error code
+    correctly.
+
+37. Added new error conditions to retry rules: timeout_A, timeout_MX,
+    timeout_connect_A, timeout_connect_MX.
+
+38. Rewriting the envelope sender at SMTP time did not allow it to be rewritten
+    to the empty sender.
+
+39. The daemon was not analysing the content of -oX till after it had closed
+    stderr and disconnected from the controlling terminal. This meant that any
+    syntax errors were only noted on the panic log, and the return code from
+    the command was 0. By re-arranging the code a little, I've made the
+    decoding happen first, so such errors now appear on stderr, and the return
+    code is 1. However, the actual setting up of the sockets still happens in
+    the disconnected process, so errors there are still only recorded on the
+    panic log.
+
+40. A daemon listener on a wildcard IPv6 socket that also accepts IPv4
+    connections (as happens on some IP stacks) was logged at start up time as
+    just listening for IPv6. It now logs "IPv6 with IPv4". This differentiates
+    it from "IPv6 and IPv4", which means that two separate sockets are being
+    used.
+
+41. The debug output for gethostbyname2() or getipnodebyname() failures now
+    says whether AF_INET or AF_INET6 was passed as an argument.
+
+42. Exiwhat output was messed up when time zones were included in log
+    timestamps.
+
+43. Exiwhat now gives more information about the daemon's listening ports,
+    and whether -tls-on-connect was used.
+
+44. The "port" option of the smtp transport is now expanded.
+
+45. A "message" modifier in a "warn" statement in a non-message ACL was being
+    silently ignored. Now an error message is written to the main and panic
+    logs.
+
+46. There's a new ACL modifier called "logwrite" which writes to a log file
+    as soon as it is encountered.
+
+47. Added $local_user_uid and $local_user_gid at routing time.
+
+48. Exim crashed when trying to verify a sender address that was being
+    rewritten to "<>".
+
+49. Exim was recognizing only a space character after ".include". It now also
+    recognizes a tab character.
+
+50. Fixed several bugs in the Perl script that creates the exim.8 man page by
+    extracting the relevant information from the specification. The man page no
+    longer contains scrambled data for the -d option, and I've added a section
+    at the front about calling Exim under different names.
+
+51. Added "extra_headers" argument to the "mail" command in filter files.
+
+52. Redirecting mail to an unqualified address in a Sieve filter caused Exim to
+    crash.
+
+53. Installed eximstats 1.29.
+
+54. Added transport_filter_timeout as a generic transport option.
+
+55. Exim no longer adds an empty Bcc: header to messages that have no To: or
+    Cc: header lines. This was required by RFC 822, but it not required by RFC
+    2822.
+
+56. Exim used to add From:, Date:, and Message-Id: header lines to any
+    incoming messages that did not have them. Now it does so only if the
+    message originates locally, that is, if there is no associated remote host
+    address. When Resent- header lines are present, this applies to the Resent-
+    lines rather than the non-Resent- lines.
+
+57. Drop incoming SMTP connection after too many syntax or protocol errors. The
+    limit is controlled by smtp_max_synprot_errors, defaulting to 3.
+
+58. Messages for configuration errors now include the name of the main
+    configuration file - useful now that there may be more than one file in a
+    list (.included file names were always shown).
+
+59. Change 4.21/82 (run initgroups() when starting the daemon) causes problems
+    for those rare installations that do not start the daemon as root or run it
+    setuid root. I've cut out the call to initgroups() if the daemon is not
+    root at that time.
+
+60. The Exim user and group can now be bound into the binary as text strings
+    that are looked up at the start of Exim's processing.
+
+61. Applied a small patch for the Interbase code, supplied by Ard Biesheuvel.
+
+62. Added $mailstore_basename variable.
+
+63. Installed patch to sieve.c from Michael Haardt.
+
+64. When Exim failed to open the panic log after failing to open the main log,
+    the original message it was trying to log was written to stderr and debug
+    output, but if they were not available (the usual case in production), it
+    was lost. Now it is written to syslog before the two lines that record the
+    failures to open the logs.
+
+65. Users' Exim filters run in subprocesses under the user's uid. It is
+    possible for a "deliver" command or an alias in a "personal" command to
+    provoke an address rewrite. If logging of address rewriting is configured,
+    this fails because the process is not running as root or exim. There may be
+    a better way of dealing with this, but for the moment (because 4.30 needs
+    to be released), I have disabled address rewrite logging when running a
+    filter in a non-root, non-exim process.
+
+
+Exim version 4.24
+-----------------
+
+ 1. The buildconfig auxiliary program wasn't quoting the value set for
+    HEADERS_CHARSET. This caused a compilation error complaining that 'ISO' was
+    not defined. This bug was masked in 4.22 by the effect that was fixed in
+    change 4.23/1.
+
+ 2. Some messages that were rejected after a message id was allocated were
+    shown as "incomplete" by exigrep. It no longer does this for messages that
+    are rejected by local_scan() or the DATA or non-SMTP ACLs.
+
+ 3. If a Message-ID: header used a domain literal in the ID, and Exim did not
+    have allow_domain_literals set, the ID did not get logged in the <= line.
+    Domain literals are now always recognized in Message-ID: header lines.
+
+ 4. The first argument for a ${extract expansion item is the key name or field
+    number. Leading and trailing spaces in this item were not being ignored,
+    causing some misleading effects.
+
+ 5. When deliver_drop_privilege was set, single queue runner processes started
+    manually (i.e. by the command "exim -q") or by the daemon (which uses the
+    same command in the process it spins off) were not dropping privilege.
+
+ 6. When the daemon running as "exim" started a queue runner, it always
+    re-executed Exim in the spun-off process. This is a waste of effort when
+    deliver_drop_privilege is set. The new process now just calls the
+    queue-runner function directly.
+
+
+Exim version 4.23
+-----------------
+
+ 1. Typo in the src/EDITME file: it referred to HEADERS_DECODE_TO instead of
+    HEADERS_CHARSET.
+
+ 2. Change 4.21/73 introduced a bug. The pid file path set by -oP was being
+    ignored. Though the use of -oP was forcing the writing of a pid file, it
+    was always written to the default place.
+
+ 3. If the message "no IP address found for host xxxx" is generated during
+    incoming verification, it is now followed by identification of the incoming
+    connection (so you can more easily find what provoked it).
+
+ 4. Bug fix for Sieve filters: "stop" inside a block was not working properly.
+
+ 5. Added some features to "harden" Exim a bit more against certain attacks:
+
+    (a) There is now a build-time option called FIXED_NEVER_USERS that can
+        be put in Local/Makefile. This is like the never_users runtime option,
+        but it cannot be overridden. The default setting is "root".
+
+    (b) If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a
+        prefix string with which any file named in a -C command line option
+        must start.
+
+    (c) If ALT_CONFIG_ROOT_ONLY is defined in Local/Makefile, root privilege
+        is retained for -C and -D only if the caller of Exim is root. Without
+        it, the exim user may also use -C and -D and retain privilege.
+
+    (d) If DISABLE_D_OPTION is defined in Local/Makefile, the use of the -D
+        command line option is disabled.
+
+ 6. Macro names set by the -D option must start with an upper case letter, just
+    like macro names defined in the configuration file.
+
+ 7. Added "dereference=" facility to LDAP.
+
+ 8. Two instances of the typo "uknown" in the source files are fixed.
+
+ 9. If a PERL_COMMAND setting in Local/Makefile was not at the start of a line,
+    the Configure-Makefile script screwed up while processing it.
+
+10. Incorporated PCRE 4.4.
+
+11. The SMTP synchronization check was not operating right at the start of an
+    SMTP session. For example, it could not catch a HELO sent before the client
+    waited for the greeting. There is now a check for outstanding input at the
+    point when the greeting is written. Because of the duplex, asynchronous
+    nature of TCP/IP, it cannot be perfect - the incorrect input may be on its
+    way, but not yet received, when the check is performed.
+
+12. Added tcp_nodelay to make it possible to turn of the setting of TCP_NODELAY
+    on TCP/IP sockets, because this apparently causes some broken clients to
+    timeout.
+
+13. Installed revised OS/Makefile-CYGWIN and OS/os.c-cygwin (the .h file was
+    unchanged) from the Cygwin maintainer.
+
+14. The code for -bV that shows what is in the binary showed "mbx" when maildir
+    was supported instead of testing for mbx. Effectively a typo.
+
+15. The spa authenticator server code was not checking that the input it
+    received was valid base64.
+
+16. The debug output line for the "set" modifier in ACLs was not showing the
+    name of the variable that was being set.
+
+17. Code tidy: the variable type "vtype_string" was never used. Removed it.
+
+18. Previously, a reference to $sender_host_name did not cause a DNS reverse
+    lookup on its own. Something else was needed to trigger the lookup. For
+    example, a match in host_lookup or the need for a host name in a host list.
+    Now, if $sender_host_name is referenced and the host name has not yet been
+    looked up, a lookup is performed. If the lookup fails, the variable remains
+    empty, and $host_lookup_failed is set to "1".
+
+19. Added "eqi" as a case-independent comparison operator.
+
+20. The saslauthd authentication condition could segfault if neither service
+    nor realm was specified.
+
+21. If an overflowing value such as "2048M" was set for message_size_limit, the
+    error message that was logged was misleading, and incoming SMTP
+    connections were dropped. The message is now more accurate, and temporary
+    errors are given to SMTP connections.
+
+22. In some error situations (such as 21 above) Exim rejects all SMTP commands
+    (except RSET) with a 421 error, until QUIT is received. However, it was
+    failing to send a response to QUIT.
+
+23. The HELO ACL was being run before the code for helo_try_verify_hosts,
+    which made it impossible to use "verify = helo" in the HELO ACL. The HELO
+    ACL is now run after the helo_try_verify_hosts code.
+
+24. "{MD5}" and "{SHA1}" are now recognized as equivalent to "{md5"} and
+    "{sha1}" in the "crypteq" expansion condition (in fact the comparison is
+    case-independent, so other case variants are also recognized). Apparently
+    some systems use these upper case variants.
+
+25. If more than two messages were waiting for the same host, and a transport
+    filter was specified for the transport, Exim sent two messages over the
+    same TCP/IP connection, and then failed with "socket operation on non-
+    socket" when it tried to send the third.
+
+26. Added Exim::debug_write and Exim::log_write for embedded Perl use.
+
+27. The extern definition of crypt16() in expand.c was not being excluded when
+    the OS had its own crypt16() function.
+
+28. Added bounce_return_body as a new option, and bounce_return_size_limit
+    as a preferred synonym for return_size_limit, both as an option and as an
+    expansion variable.
+
+29. Added LIBS=-liconv to OS/Makefile-OSF1.
+
+30. Changed the default configuration ACL to relax the local part checking rule
+    for addresses that are not in any local domains. For these addresses,
+    slashes and pipe symbols are allowed within local parts, but the sequence
+    /../ is explicitly forbidden.
+
+31. SPA server authentication was not clearing the challenge buffer before
+    using it.
+
+32. log_message in a "warn" ACL statement was writing to the reject log as
+    well as to the main log, which contradicts the documentation and doesn't
+    seem right (because no rejection is happening). So I have stopped it.
+
+33. Added Ard Biesheuvel's lookup code for accessing an Interbase database.
+    However, I am unable to do any testing of this.
+
+34. Fixed an infelicity in the appendfile transport. When checking directories
+    for a mailbox, to see if any needed to be created, it was accidentally
+    using path names with one or more superfluous leading slashes; tracing
+    would show up entries such as stat("///home/ph10", 0xFFBEEA48).
+
+35. If log_message is set on a "discard" verb in a MAIL or RCPT ACL, its
+    contents are added to the log line that is written for every discarded
+    recipient. (Previously a log_message setting was ignored.)
+
+36. The ${quote: operator now quotes the string if it is empty.
+
+37. The install script runs exim in order to find its version number. If for
+    some reason other than non-existence or emptiness, which it checks, it
+    could not run './exim', it was installing it with an empty version number,
+    i.e. as "exim-". This error state is now caught, and the installation is
+    aborted.
+
+38. An argument was missing from the function that creates an error message
+    when Exim fails to connect to the socket for saslauthd authentication.
+    This could cause Exim to crash, or give a corrupted message.
+
+39. Added isip, isip4, and isip6 to ${if conditions.
+
+40. The ACL variables $acl_xx are now saved with the message, and can be
+    accessed later in routers, transports, and filters.
+
+41. The new lookup type nwildlsearch is like wildlsearch, except that the key
+    strings in the file are not string-expanded.
+
+42. If a MAIL command specified a SIZE value that was too large to fit into an
+    int variable, the check against message_size_limit failed. Such values are
+    now forced to INT_MAX, which is around 2Gb for a 32-bit variable. Maybe one
+    day this will have to be increased, but I don't think I want to be around
+    when emails are that large.
+
+
+
+Exim version 4.22
+-----------------
+
+ 1. Removed HAVE_ICONV=yes from OS/Makefile-FreeBSD, since it seems that
+    iconv() is not standard in FreeBSD.
+
+ 2. Change 4.21/17 was buggy and could cause stack overwriting on a system with
+    IPv6 enabled. The observed symptom was a segmentation fault on return from
+    the function os_common_find_running_interfaces() in src/os.c.
+
+ 3. In the check_special_case() function in daemon.c I had used "errno" as an
+    argument name, which causes warnings on some systems. This was basically a
+    typo, since it was named "eno" in the comments!
+
+ 4. The code that waits for the clock to tick (at a resolution of some fraction
+    of a second) so as to ensure message-id uniqueness was always waiting for
+    at least one whole tick, when it could have waited for less. [This is
+    almost certainly not relevant at current processor speeds, where it is
+    unlikely to ever wait at all. But we try to future-proof.]
+
+ 5. The function that sleeps for a time interval that includes fractions of a
+    second contained a race. It did not block SIGALRM between setting the
+    timer, and suspending (a couple of lines later). If the interval was short
+    and the sigsuspend() was delayed until after it had expired, the suspension
+    never ended. On busy systems this could lead to processes getting stuck for
+    ever.
+
+ 6. Some uncommon configurations may cause a lookup to happen in a queue runner
+    process, before it forks any delivery processes. The open lookup caching
+    mechanism meant that the open file or database connection was passed into
+    the delivery process. The problem was that delivery processes always tidy
+    up cached lookup data. This could cause a problem for the next delivery
+    process started by the queue runner, because the external queue runner
+    process does not know about the closure. So the next delivery process
+    still has data in the lookup cache. In the case of a file lookup, there was
+    no problem because closing a file descriptor in a subprocess doesn't affect
+    the parent. However, if the lookup was caching a connection to a database,
+    the connection was closed, and the second delivery process was likely to
+    see errors such as "PGSQL: query failed: server closed the connection
+    unexpectedly". The problem has been fixed by closing all cached lookups
+    in a queue runner before running a delivery process.
+
+ 7. Compiler warning on Linux for the second argument of iconv(), which doesn't
+    seem to have the "const" qualifier which it has on other OS. I've
+    parameterised it.
+
+ 8. Change 4.21/2 was too strict. It is only if there are two authenticators
+    *of the same type* (client or server) with the same public name that an
+    error should be diagnosed.
+
+ 9. When Exim looked up a host name for an IP address, but failed to find the
+    original IP address when looking up the host name (a safety check), it
+    output the message "<ip address> does not match any IP for NULL", which was
+    confusing, to say the least. The bug was that the host name should have
+    appeared instead of "NULL".
+
+10. Since release 3.03, if Exim is called by a uid other than root or the Exim
+    user that is built into the binary, and the -C or -D options is used, root
+    privilege is dropped before the configuration file is read. In addition,
+    logging is switched to stderr instead of the normal log files. If the
+    configuration then re-defines the Exim user, the unprivileged environment
+    is probably not what is expected, so Exim logs a panic warning message (but
+    proceeds).
+
+    However, if deliver_drop_privilege is set, the unprivileged state may well
+    be exactly what is intended, so the warning has been cut out in that case,
+    and Exim is allowed to try to write to its normal log files.
+
+
+Exim version 4.21
+-----------------
+
+ 1. smtp_return_error_details was not giving details for temporary sender
+    or receiver verification errors.
+
+ 2. Diagnose a configuration error if two authenticators have the same public
+    name.
+
+ 3. Exim used not to create the message log file for a message until the first
+    delivery attempt. This could be confusing when incoming messages were held
+    for policy or load reasons. The message log file is now created at the time
+    the message is received, and an initial "Received" line is written to it.
+
+ 4. The automatically generated man page for command line options had a minor
+    bug that caused no ill effects; however, a more serious problem was that
+    the procedure for building the man page automatically didn't always
+    operate. Consequently, release 4.20 contains an out-of-date version. This
+    shouldn't happen again.
+
+ 5. When building Exim with embedded Perl support, the script that builds the
+    Makefile was calling 'perl' to find its compile-time parameters, ignoring
+    any setting of PERL_COMMAND in Local/Makefile. This is now fixed.
+
+ 6. The freeze_tell option was not being used for messages that were frozen on
+    arrival, either by an ACL or by local_scan().
+
+ 7. Added the smtp_incomplete_transaction log selector.
+
+ 8. After STARTTLS, Exim was not forgetting that it had advertised AUTH, so it
+    was accepting AUTH without a new EHLO.
+
+ 9. Added tls_remember_esmtp to cope with YAEB. This allows AUTH and other
+    ESMTP extensions after STARTTLS without a new EHLO, in contravention of the
+    RFC.
+
+10. Logging of TCP/IP connections (when configured) now happens in the main
+    daemon process instead of the child process, so that the TCP/IP connection
+    count is more accurate (but it can never be perfect).
+
+11. The use of "drop" in a nested ACL was not being handled correctly in the
+    outer ACL. Now, if condition failure induced by the nested "drop" causes
+    the outer ACL verb to deny access ("accept" or "discard" after "endpass",
+    or "require"), the connection is dropped.
+
+12. Similarly, "discard" in a nested ACL wasn't being handled. A nested ACL
+    that yield "discard" can now be used with an "accept" or a "discard" verb,
+    but an error is generated for any others (because I can't see a useful way
+    to define what should happen).
+
+13. When an ACL is read dynamically from a file (or anywhere else), the lines
+    are now processed in the same way as lines in the Exim configuration file.
+    In particular, continuation lines are supported.
+
+14. Added the "dnslists = a.b.c!=n.n.n.n" feature.
+
+15. Added -ti meaning -t -i.
+
+16. Check for letters, digits, hyphens, and dots in the names of dnslist
+    domains, and warn by logging if others are found.
+
+17. At least on BSD, alignment is not guaranteed for the array of ifreq's
+    returned from GIFCONF when Exim is trying to find the list of interfaces on
+    a host. The code in os.c has been modified to copy each ifreq to an aligned
+    structure in all cases.
+
+    Also, in some cases, the returned ifreq's were being copied to a 'struct
+    ifreq' on the stack, which was subsequently passed to host_ntoa(). That
+    means the last couple of bytes of an IPv6 address could be chopped if the
+    ifreq contained only a normal sockaddr (14 bytes storage).
+
+18. Named domain lists were not supported in the hosts_treat_as_local option.
+    An entry such as +xxxx was not recognized, and was treated as a literal
+    domain name.
+
+19. Ensure that header lines added by a DATA ACL are included in the reject log
+    if the ACL subsequently rejects the message.
+
+20. Upgrade the cramtest.pl utility script to use Digest::MD5 instead of just
+    MD5 (which is deprecated).
+
+21. When testing a filter file using -bf, Exim was writing a message when it
+    took the sender from a "From " line in the message, but it was not doing so
+    when it took $return_path from a Return-Path: header line. It now does.
+
+22. If the contents of a "message" modifier for a "warn" ACL verb do not begin
+    with a valid header line field name (a series of printing characters
+    terminated by a colon, Exim now inserts X-ACL-Warn: at the beginning.
+
+23. Changed "disc" in the source to "disk" to conform to the documentation and
+    the book and for uniformity.
+
+24. Ignore Sendmail's -Ooption=value command line item.
+
+25. When execve() failed while trying to run a command in a pipe transport,
+    Exim was returning EX_UNAVAILABLE (69) from the subprocess. However, this
+    could be confused with a return value of 69 from the command itself. This
+    has been changed to 127, the value the shell returns if it is asked to run
+    a non-existent command. The wording for the related log line suggests a
+    non-existent command as the problem.
+
+26. If received_header_text expands to an empty string, do not add a Received:
+    header line to the message. (Well, it adds a token one on the spool, but
+    marks it "old" so that it doesn't get used or transmitted.)
+
+27. Installed eximstats 1.28 (addition of -nt option).
+
+28. There was no check for failure on the call to getsockname() in the daemon
+    code. This can fail if there is a shortage of resources on the system, with
+    ENOMEM, for example. A temporary error is now given on failure.
+
+29. Contrary to the C standard, it seems that in some environments, the
+    equivalent of setlocale(LC_ALL, "C") is not obeyed at the start of a C
+    program. Exim now does this explicitly; it affects the formatting of
+    timestamps using strftime().
+
+30. If exiqsumm was given junk data, it threw up some uninitialized variable
+    complaints. I've now initialized all the variables, to avoid this.
+
+32. Header lines added by a system filter were not being "seen" during
+    transport-time rewrites.
+
+33. The info_callback() function passed to OpenSSL is set up with type void
+    (*)(SSL *, int, int), as described somewhere. However, when calling the
+    function (actually a macro) that sets it up, the type void(*)() is
+    expected. I've put in a cast to prevent warnings from picky compilers.
+
+34. If a DNS black list lookup found a CNAME record, but there were no A
+    records associated with the domain it pointed at, Exim crashed.
+
+35. If a DNS black list lookup returned more than one A record, Exim ignored
+    all but the first. It now scans all returned addresses if a particular IP
+    value is being sought. In this situation, the contents of the
+    $dnslist_value variable are a list of all the addresses, separated by a
+    comma and a space.
+
+36. Tightened up the rules for host name lookups using reverse DNS. Exim used
+    to accept a host name and all its aliases if the forward lookup for any of
+    them yielded the IP address of the incoming connection. Now it accepts only
+    those names whose forward lookup yields the correct IP address. Any other
+    names are discarded. This closes a loophole whereby a rogue DNS
+    administrator could create reverse DNS records to break through a
+    wildcarded host restriction in an ACL.
+
+37. If a user filter or a system filter that ran in a subprocess used any of
+    the numerical variables ($1, $2 etc), or $thisaddress, in a pipe command,
+    the wrong values were passed to the pipe command ($thisaddress had the
+    value of $0, $0 had the value of $1, etc). This bug was introduced by
+    change 4.11/101, and not discovered because I wrote an inadequate test. :-(
+
+38. Improved the line breaking for long SMTP error messages from ACLs.
+    Previously, if there was no break point between 40 and 75 characters, Exim
+    left the rest of the message alone. Two changes have been made: (a) I've
+    reduced the minimum length to 35 characters; (b) if it can't find a break
+    point between 35 and 75 characters, it looks ahead and uses the first one
+    that it finds. This may give the occasional overlong line, but at least the
+    remaining text gets split now.
+
+39. Change 82 of 4.11 was unimaginative. It assumed the limit on the number of
+    file descriptors might be low, and that setting 1000 would always raise it.
+    It turns out that in some environments, the limit is already over 1000 and
+    that lowering it causes trouble. So now Exim takes care not to decrease it.
+
+40. When delivering a message, the value of $return_path is set to $sender_
+    address at the start of routing (routers may change the value). By an
+    oversight, this default was not being set up when an address was tested by
+    -bt or -bv, which affected the outcome if any router or filter referred to
+    $return_path.
+
+41. The idea of the "warn" ACL verb is that it adds a header or writes to the
+    log only when "message" or "log_message" are set. However, if one of the
+    conditions was an address verification, or a call to a nested ACL, the
+    messages generated by the underlying test were being passed through. This
+    no longer happens. The underlying message is available in $acl_verify_
+    message for both "message" and "log_message" expansions, so it can be
+    passed through if needed.
+
+42. Added RFC 2047 interpretation of header lines for $h_ expansions, with a
+    new expansion $bh_ to give the encoded byte string without charset
+    translation. Translation happens only if iconv() is available; HAVE_ICONV
+    indicates this at build time. HEADERS_CHARSET gives the charset to
+    translate to; headers_charset can change it in the configuration, and
+    "headers charset" can change it in an individual filter file.
+
+43. Now that we have a default RFC 2047 charset (see above), the code in Exim
+    that creates RFC 2047 encoded "words" labels them as that charset instead
+    of always using iso-8859-1. The cases are (i) the explicit ${rfc2047:
+    expansion operator; (ii) when Exim creates a From: line for a local
+    message; (iii) when a header line is rewritten to include a "phrase" part.
+
+44. Nasty bug in exiqsumm: the regex to skip already-delivered addresses was
+    buggy, causing it to skip the first lines of messages whose message ID
+    ended in 'D'. This would not have bitten before Exim release 4.14, because
+    message IDs were unlikely to end in 'D' before then. The effect was to have
+    incorrect size information for certain domains.
+
+45. #include "config.h" was missing at the start of the crypt16.c module. This
+    caused trouble on Tru64 (aka OSF1) systems, because HAVE_CRYPT16 was not
+    noticed.
+
+46. If there was a timeout during a "random" callout check, Exim treated it as
+    a failure of the random address, and carried on sending RSET and the real
+    address. If the delay was just some slowness somewhere, the response to the
+    original RCPT would be taken as a response to RSET and so on, causing
+    mayhem of various kinds.
+
+47. Change 50 for 4.20 was a heap of junk. I don't know what I was thinking
+    when I implemented it. It didn't allow for the fact that some option values
+    may legitimately be negative (e.g. size_addition), and it didn't even do
+    the right test for positive values.
+
+48. Domain names in DNS records are case-independent. Exim always looks them up
+    in lower case. Some resolvers return domain names in exactly the case they
+    appear in the zone file, that is, they may contain uppercase letters. Not
+    all resolvers do this - some return always lower case. Exim was treating a
+    change of case by a resolver as a change of domain, similar to a widening
+    of a domain abbreviation. This triggered its re-routing code and so it was
+    trying to route what was effectively the same domain again. This normally
+    caused routing to fail (because the router wouldn't handle the domain
+    twice). Now Exim checks for this case specially, and just changes the
+    casing of the domain that it ultimately uses when it transmits the message
+    envelope.
+
+49. Added Sieve (RFC 3028) support, courtesy of Michael Haardt's contributed
+    module.
+
+50. If a filter generated a file delivery with a non-absolute name (possible if
+    no home directory exists for the router), the forbid_file option was not
+    forbidding it.
+
+51. Added '&' feature to dnslists, to provide bit mask matching in addition to
+    the existing equality matching.
+
+52. Exim was using ints instead of ino_t variables in some places where it was
+    dealing with inode numbers.
+
+53. If TMPDIR is defined in Local/Makefile (default in src/EDITME is
+    TMPDIR="/tmp"), Exim checks for the presence of an environment variable
+    called TMPDIR, and if it finds it is different, it changes its value.
+
+54. The smtp_printf() function is now made available to local_scan() so
+    additional output lines can be written before returning. There is also an
+    smtp_fflush() function to enable the detection of a dropped connection.
+    The variables smtp_input and smtp_batched_input are exported to
+    local_scan().
+
+55. Changed the default runtime configuration: the message "Unknown user"
+    has been removed from the ACL, and instead placed on the localuser router,
+    using the cannot_route_message feature. This means that any verification
+    failures that generate their own messages won't get overridden. Similarly,
+    the "Unrouteable address" message that was in the ACL for unverifiable
+    relay addresses has also been removed.
+
+56. Added hosts_avoid_esmtp to the smtp transport.
+
+57. The exicyclog script was not checking for the esoteric option
+    CONFIGURE_FILE_USE_EUID in the Local/Makefile. It now does this, but it
+    will work only if exicyclog is run under the appropriate euid.
+
+58. Following a discussion on the list, the rules by which Exim recognises line
+    endings on incoming messages have been changed. The -dropcr and drop_cr
+    options are now no-ops, retained only for backwards compatibility. The
+    following line terminators are recognized: LF CRLF CR. However, special
+    processing applies to CR:
+
+    (i)  The sequence CR . CR does *not* terminate an incoming SMTP message,
+         nor a local message in the state where . is a terminator.
+
+    (ii) If a bare CR is encountered in a header line, an extra space is added
+         after the line terminator so as not to end the header. The reasoning
+         behind this is that bare CRs in header lines are most likely either
+         to be mistakes, or people trying to play silly games.
+
+59. The size of a message, as listed by "-bp" or in the Exim monitor window,
+    was being incorrectly given as 18 bytes larger than it should have been.
+    This is a VOB (very old bug).
+
+60. This may never have affected anything current, but just in case it has:
+    When the local host is found other than at the start of a list of hosts,
+    the local host, those with the same MX, and any that follow, are discarded.
+    When the list in question was part of a longer list of hosts, the following
+    hosts (not currently being processed) were also being discarded. This no
+    longer happens. I'm not sure if this situation could ever has previously
+    arisen.
+
+61. Added the "/MX" feature to lists of hosts in the manualroute and query
+    program routers.
+
+62. Whenever Exim generates a new message, it now adds an Auto-Submitted:
+    header. This is something that is recommended in a new Internet Draft, and
+    is something that is documented as being done by Sendmail. There are two
+    possible values. For messages generated by the autoreply transport, Exim
+    adds:
+
+      Auto-Submitted: auto-replied
+
+    whereas for all other generated messages (e.g. bounces) it adds
+
+      Auto-Submitted: auto-generated
+
+63. The "personal" condition in filters now includes a test for the
+    Auto-Submitted: header. If it contains the string "auto-" the message it
+    not considered personal.
+
+64. Added rcpt_include_affixes as a generic transport option.
+
+65. Added queue_only_override (default true).
+
+66. Added the syslog_duplication option.
+
+67. If what should have been the first header line of a message consisted of
+    a space followed by a colon, Exim was mis-interpreting it as a header line.
+    It isn't of course - it is syntactically invalid and should therefore be
+    treated as the start of the message body. The misbehaviour could have
+    caused a number of strange effects, including loss of data in subsequent
+    header lines, and spool format errors.
+
+68. Formerly, the AUTH parameter on a MAIL command was trusted only if the
+    client host had authenticated. This control can now be exercised by an ACL
+    for more flexibility.
+
+69. By default, callouts do not happen when testing with -bh. There is now a
+    variant, -bhc, which does actually run the callout code, including
+    consulting and updating the callout cache.
+
+70. Added support for saslauthd authentication, courtesy of Alexander
+    Sabourenkov.
+
+71. If statvfs() failed on the spool or log directories while checking their
+    size for availability, Exim confusingly gave the error "space shortage".
+    Furthermore, in debugging mode it crashed with a floating point exception.
+    These checks are done if check_{spool,log}_{space,inodes} are set, and when
+    an SMTP message arrives with SIZE= on the MAIL command. As this is a really
+    serious problem, Exim now writes to the main and panic logs when this
+    happens, with details of the failure. It then refuses to accept the
+    incoming message, giving the message "spool directory problem" or "log
+    directory problem" with a 421 code for SMTP messages.
+
+72. When Exim is about to re-exec itself, it ensures that the file descriptors
+    0, 1, and 2 exist, because some OS complain for execs without them (see
+    ChangeLog 4.05/30). If necessary, Exim opens /dev/null to use for these
+    descriptors. However, the code omitted to check that the open succeeded,
+    causing mysterious errors if for some reason the permissions on /dev/null
+    got screwed. Now Exim writes a message to the main and panic logs, and
+    bombs out if it can't open /dev/null.
+
+73. Re-vamped the way daemon_smtp_port, local_interfaces, and -oX work and
+    interact so that it is all more flexible. It is supposed to remain
+    backwards compatible. Also added extra_local_interfaces.
+
+74. Invalid data sent to a SPA (NTLM) server authenticator could cause the code
+    to bomb out with an assertion failure - to the client this appears as a
+    connection drop. This problem occurs in the part of the code that was taken
+    from the Samba project. Fortunately, the assertion is in a very simple
+    function, so I have fixed this by reproducing the function inline in the
+    one place where it is called, and arranging for authentication to fail
+    instead of killing the process with assert().
+
+75. The SPA client code was not working when the server requested OEM rather
+    than Unicode encoding.
+
+76. Added code to make require_files with a specific uid setting more usable in
+    the case where statting the file as root fails - usually a non-root-mounted
+    NFS file system. When this happens and the failure is EACCES, Exim now
+    forks a subprocess and does the per-uid checking as the relevant uid.
+
+77. Added process_log_path.
+
+78. If log_file_path was not explicitly set, a setting of check_log_space or
+    check_log_inodes was ignored.
+
+79. If a space check for the spool or log partitions fails, the incident is now
+    logged. Of course, in the latter case the data may get lost...
+
+80. Added the %p formatting code to string_format() so that it can be used to
+    print addresses in debug_print(). Adjusted all the address printing in the
+    debugging in store.c to use %p rather than %d.
+
+81. There was a concern that a line of code in smtp_in.c could overflow a
+    buffer if a HELO/EHLO command was given followed by 500 or so spaces. As
+    initially expressed, the concern was not well-founded, because trailing
+    spaces are removed early. However, if the trailing spaces were followed by
+    a NULL, they did not get removed, so the overflow was possible. Two fixes
+    were applied:
+
+    (a) I re-wrote the offending code in a cleaner fashion.
+    (b) If an incoming SMTP command contains a NULL character, it is rejected
+        as invalid.
+
+82. When Exim changes uid/gid to the Exim user at daemon start time, it now
+    runs initgroups(), so that if the Exim user is in any additional groups,
+    they will be used during message reception.
+
+
+Exim version 4.20
+-----------------
+
+The change log for 4.20 and earlier releases has been archived.
+
+****
diff --git a/doc/DANE-draft-notes b/doc/DANE-draft-notes
new file mode 100644
index 0000000..21b3992
--- /dev/null
+++ b/doc/DANE-draft-notes
@@ -0,0 +1,11 @@
+
+draft 11
+
+3.1.2 - Para 4 (records with Sel Full(0) are discouraged)
+==> There's a matching type Full but not such a Selector type.
+    Should this be "Cert(0), or Matching Type Full(0)" ?
+    Suspect the latter.
+
+3.1.2 Needs a para added regarding certificate date verification,
+    to contrast with the requirement to NOT check for
+    DANE-EE defined in 3.1.1
diff --git a/doc/Exim3.upgrade b/doc/Exim3.upgrade
new file mode 100644
index 0000000..4ab94c4
--- /dev/null
+++ b/doc/Exim3.upgrade
@@ -0,0 +1,671 @@
+This document contains information about upgrading Exim to the last of the 3.xx
+releases. It is provided to help anybody who is upgrading to release 4.xx from
+a release that is earlier than 3.33. It goes back as far as release 2.12. If
+you are upgrading to release 4.xx from an even earlier release, it is probably
+best to start again from the default configuration.
+
+
+Upgrading from release 3.16
+---------------------------
+
+1. The way LDAP returns values for multiple attributes has been changed to be
+the same as the NIS+ lookup.
+
+If you specify multiple attributes, they are returned as space-separated
+strings, quoted if necessary.
+
+e.g.   ldap:///o=base?attr1,attr2?sub?(uid=fred)
+
+       used to give:    attr1=value one, attr2=value2
+       now gives:       attr1="value one" attr2=value2
+
+If you don't specify any attributes in the search, you now get them in
+the tagged format as well.
+
+e.g.   ldap:///o=base??sub?(uid=fred)
+
+       used to give:    top, value one, value2
+       now gives:       objectClass=top attr1="value one" attr2=value2
+
+The reason for these changes is so that the results can be safely parsed -
+in fact, the existing ${extract{key}{val}} function does this nicely.
+This in turn allows a single LDAP query to be reused - one query can return
+the destination delivery address, the quota, and so forth.
+
+This is NOT a backwards compatible change, so there is a compile-time option
+to reverse it in the src/lookups/ldap.c module, for use in emergency. But it is
+not thought that the old behaviour was particularly useful as it stood, because
+a field that contained ',' or '=' would make the result unparseable.
+
+In the common case where you explicitly ask for a single attribute in your
+LDAP query, the behaviour is unchanged - the result is not quoted, and if there
+are multiple values they are comma-separated.
+
+2. The hosts_max_try option in the smtp transport limits the number of IP
+addresses that will actually be tried during one delivery attempt. The default
+is 5. Previously, all available addresses were tried.
+
+3. The extension of the "extract" expansion item has resulted in a change to
+the way Exim decides between the keyed form and the numeric form. If the first
+argument consists entirely of digits, the numeric form is assumed. This means
+that it is impossible to have keys that are digit strings, without manipulating
+the data first (e.g. by using ${sg} to add a letter to each key).
+
+
+Upgrading from release 3.15
+---------------------------
+
+1. The handling of "freeze" and "fail" in system filter files has changed.
+Previously, any deliveries set up by a filter that ended with "freeze" or
+"fail" were discarded. This no longer happens; such deliveries are honoured.
+A consequence of this is that first_delivery becomes false after freezing in a
+system filter; previously it remained true until a real delivery attempt
+happened.
+
+
+Upgrading from release 3.13
+---------------------------
+
+1. The handling of maildir_tag has been changed (see NewStuff). There are two
+small incompatibilities: (a) Exim now inserts a leading colon only if the
+string begins with an alphanumeric character. So if you were using a string
+starting with a special character, you will have to add the leading colon to
+it to remain compatible. (b) The expansion of maildir_tag now happens after the
+file has been written, and $message_size is updated to the correct file size
+before the expansion. The tag is not used on the temporary file (it was
+previously).
+
+2. The handling of Exim's configuration has changed in two ways:
+
+  (a) Any line may be continued by ending it with a backslash. Trailing white
+  space after the backslash, and leading white space on continuation lines is
+  ignored. This means that quotes are no longer needed just to make it possible
+  to continue an option setting. The difference between quoted and non-quoted
+  strings is that quoted strings are processed for internal backslashed items
+  such as \n. The only possible incompatibility of this change is if any
+  existing configuration has a non-quoted line ended in backslash, which seems
+  a very remote possibility.
+
+  (b) All lists, with the exception of log_file_path, can now use a different
+  character to colon as the separator. This is specified by starting the list
+  with <x where x is any punctuation character. For example:
+
+    local_interfaces = <; 127.0.0.1 ; ::1
+
+  The new feature is provided to make life easier with IPv6 addresses. It is
+  recommended that its use be confined to circumstances where it really is
+  needed, and that colon be used in most cases. I don't believe this change
+  is incompatible, because I don't think any list item can legitimately begin
+  with a '<' character.
+
+3. Previously, Exim took no action to ensure that the timestamps in its log
+files were "wall clock time". If the TZ environment variable was set when Exim
+was called, it could cause strange times to be logged. For the majority of
+operating systems, I have been able to fix this problem by deleting the entire
+environment. However, this doesn't work in some systems, and a macro called
+HANDS_OFF_ENVIRONMENT is defined in their OS/os.h files to suppress the action.
+These OS are: AIX, DGUX, HP-UX, IRIX, and SCO, and their behaviour should be
+unchanged from previous releases. On any other OS, if you find you are getting
+weird timestamps, it may be that your OS needs HANDS_OFF_ENVIRONMENT.
+
+4. As a result of the change described in 3, there may be some cases where Exim
+runs an external program that previously got passed the environment, and now do
+not. This does *not* apply to the pipe transport, where the environment has
+always been set up specifically, as described in the manual.
+
+5. The way in which Exim scans its queue when split_spool_directory is set has
+changed, but this shouldn't make any noticeable difference. See doc/NewStuff
+for details.
+
+
+Upgrading from release 3.03
+---------------------------
+
+The from_hack option in the appendfile and pipe transports has been replace by
+two string options, check_string and escape_string. If your configuration
+contains any references to from_hack they should be replaced. Exim continues to
+recognize from_hack as a transitional measure. If no_from_hack is specified in
+an appendfile transport, the two new options are forced to be unset. Otherwise
+the setting of from_hack is ignored.
+
+
+Upgrading from release 3.02
+---------------------------
+
+The exim_dbmbuild utility has been changed to write a warning to stderr on
+encountering a duplicate key, and to return a value of 1. Formerly, it ignored
+all but the last of a set of duplicates; now it ignores all but the first, to
+make dbm-searched files behave the same way as lsearch-searched files. However,
+there is an option -lastdup which makes it behave as before. The -nowarn option
+suppresses the individual warnings, but the number of duplicates is always
+listed on stdout at the end.
+
+
+Updating from a release prior to 3.00
+-------------------------------------
+
+Prior to release 3.00 a lot of options which contained lists of various kinds
+came in groups such as sender_accept, sender_reject, sender_reject_except. This
+style of configuration has been abolished. Instead, it is now possible to put
+negative entries in such lists, so that a single option is all that is
+required. In addition to this, net lists have been abolished, and instead,
+host lists can now contain items that specify networks as well as hosts. The
+names of some of these options have also been changed.
+
+As a result of these changes, most configuration files used for earlier
+versions of Exim need to be changed. The opportunity has therefore been taken
+to remove a number of other obsolete features and options.
+
+A Perl script is built in the file util/convert4r3 to assist in updating Exim
+configuration files. It reads a configuration file on the standard input,
+writes a modified file on the standard output, and writes comments about what
+it has done to the standard error file. It assumes that the input is a valid
+Exim configuration file. A typical call to the conversion script might be
+
+  util/convert4r3  </opt/exim/configure  >/opt/exim/configure.new
+
+The way the script merges an accept/reject/reject_except triple into a single
+accept option is to put the reject_except list first, followed by the reject
+list with every item negated, followed by the accept list. For example, if an
+old configuration file contains
+
+  sender_host_accept_relay        = *.c.d : e.f.g
+  sender_host_reject_relay        = *.b.c.d
+  sender_host_reject_relay_except = a.b.c.d
+
+the new configuration will contain
+
+  host_accept_relay = a.b.c.d : ! *.b.c.d : *.c.d : e.f.g
+
+The same ordering is used to merge a triple into a reject option, but this time
+the first and third sublists are negated. For example, if an old configuration
+file contains
+
+  sender_host_accept        = *.c.d : e.f.g
+  sender_host_reject        = *.b.c.d
+  sender_host_reject_except = a.b.c.d
+
+the new configuration file will contain
+
+  host_reject = ! a.b.c.d : *.b.c.d : ! *.c.d : ! e.f.g : *
+
+The output file should be checked before trying to use it. Each option change
+is preceded by an identifying comment. There are several specific things that
+you should look out for when checking:
+
+(1) If you are using macros to contain lists of items, and these have to be
+    negated in the new world, convert4r3 won't get it right. For example, if
+    the old configuration contains
+
+      ACCEPTHOSTS = *.c.d : e.f.g
+      sender_host_reject = ACCEPTHOSTS
+
+    then the rewritten configuration will be
+
+      ACCEPTHOSTS = *.c.d : e.f.g
+      host_reject = !ACCEPTHOSTS
+
+    but because this is just textual macro handling, that is equivalent to
+
+      host_reject = !*.c.d : e.f.g
+
+    which is not the correct translation, because the second item is not
+    negated. There is unfortunately no easy way to use a macro to provide a
+    list of things that are sometimes negated.
+
+(2) The conversion adds some settings of file_transport, pipe_transport, and
+    reply_transport to aliasfile and forwardfile directors. This is done
+    because the global implicit defaults for these options have been removed.
+    The default configuration now contains explicit settings, so convert4r3
+    makes these additions to be compatible with that. If your aliasfile and
+    forwardfile directors do not make use of the pipe, file, or autoreply
+    facilities, you can remove these new settings.
+
+(3) If you are using +allow_unknown in a host list which also has an exception
+    list, you may need to move +allow_unknown in the new configuration. For
+    example, if the old configuration contains
+
+      sender_host_reject = +allow_unknown : *.b.c
+      sender_host_reject_except = *.a.b.c
+
+    then the rewritten configuration will be
+
+      host_reject = ! *.a.b.c : +allow_unknown : *.b.c
+
+    Because the negated item contains a wild card, the reverse lookup for the
+    host name will occur before +allow_unknown is encountered, and therefore
+    +allow_unknown will have no effect. It should be moved to the start of the
+    list.
+
+One way of upgrading Exim from a pre-3.00 release to a post-3.00 release is as
+follows:
+
+1. Suppose your configuration file is called /opt/exim/configure, and you want
+   to continue with this name after upgrading. The first thing to do is to make
+   another copy of this file called, say, /opt/exim/configure.pre-3.00.
+
+2. Rebuild your existing Exim to use the copy of the configuration file instead
+   of the standard file. Install this version of Exim under a special name such
+   as exim-2.12, and point a symbolic link called "exim" at it. Then HUP your
+   daemon. You can check on the name of the configuration file by running
+
+     exim -bP configure_file
+
+   Ensure that everything is running smoothly.
+
+3. Build the new release, configured to use the standard configuration file.
+
+4. Use the convert4r3 utility to upgrade your configuration file for the new
+   release. After running it, check the file by hand.
+
+5. If any of the options that convert4r3 rewrote contained regular expressions
+   that had backslashes in them, and were not previously in quotes, they will
+   need modification if convert4r3 has put them into quotes. Either re-arrange
+   the option to remove the quoting, or escape each backslash. For example, if
+   you had
+
+     sender_reject_recipients = ^\d{8}@
+     sender_reject_except = ^\d{8}@x.y.z
+
+   convert4r3 will have combined the two settings into
+
+     sender_reject_recipients = "! ^\d{8}@x.y.z : \
+        ^\d{8}@"
+
+   This must be changed to
+
+     sender_reject_recipients = ! ^\d{8}@x.y.z : ^\d{8}@
+   or
+     sender_reject_recipients = "! ^\\d{8}@x.y.z : ^\\d{8}@"
+
+   In the second case, the quoted string could of course still be split
+   over several lines.
+
+6. If your configuration refers to any external lists of networks, check them
+   to ensure that all the masks are in the single-number form, because Exim no
+   longer recognizes the dotted quad form of mask. For example, if an item in
+   a netlist file is
+
+      131.111.8.0/255.255.255.0
+
+   you must change it to
+
+      131.111.8.0/24
+
+   Otherwise Exim will not recognize it as a masked IP address, and will treat
+   it as a host name. The convert4r3 utility makes this conversion for networks
+   that are mentioned inline in the configuration, but it does not handle
+   referenced files.
+
+7. Check the newly-built Exim as much as possible without installing; you can,
+   for example, use a command such as
+
+     ./exim -bV
+
+   in the build directory to test that it successfully reads the new
+   configuration file. You can also do tests using -bt and -bh.
+
+8. Install the new release under a special name such as exim-3.00.
+
+9. You can then easily change between the new and old releases simply by moving
+   the symbolic link and HUPping your daemon.
+
+
+Details of syntax changes at 3.00
+=================================
+
+1. A bare file name without a preceding search type may appear in a domain
+list; this causes each line of the file to be read and processed as if it were
+an item in the list, except that it cannot itself be a bare file name (that is,
+this facility cannot be used recursively). Wild cards and regular expressions
+may be used in the lines of the file just as in the main list.
+For example, if
+
+  local_domains = /etc/local-domains
+
+then the file could contain lines like
+
+  *.mydomain.com
+
+This is different to an lsearch file, which operates like any other lookup type
+and does an exact search for the key. If a # character appears anywhere in a
+line of the file, it and all following characters are ignored. Blank lines are
+also ignored.
+
+2. Any item in a domain list (including a bare file name) can be preceded by an
+exclamation mark character, to indicate negation. White space after the ! is
+ignored. If the domain matches the rest of the item, it is *not* in the set of
+domains that the option is defining. If the end of the list is reached, the
+domain is accepted if the last item was a negative one, but not if it was a
+positive one. If ! precedes a bare file name, then all items in the file are
+negated, unless they are preceded by another exclamation mark. For example:
+
+  relay_domains = !a.b.c : *.b.c
+
+sets up a.b.c as an exception to the more general item *.b.c, because lists are
+processed from left to right. If the domain that is being checked matches
+neither a.b.c nor *.b.c, then it is not accepted as a relay domain, because the
+last item in the list is a positive item. However, if the option were just
+
+  relay_domains = !a.b.c
+
+then all domains other than a.b.c would be relay domains, because the last item
+in the list is a negative item. In effect, a list that ends with a negative
+item has ": *" appended to it.
+
+3. Negation and bare file names are available as above in lists of local parts
+(e.g. in local_parts options) and complete addresses (address lists). For the
+special "@@" lookup form in address lists, negation also can be used in the
+list of local parts that is looked up for the domain. For example, with
+
+  sender_reject_recipients = @@dbm;/etc/reject-by-domain
+
+the file could contain lines like this:
+
+  baddomain.com:  !postmaster : !hostmaster : *
+
+If a local part that actually begins with ! is required, it has to be specified
+using a regular expression. Because local parts may legitimately contain #
+characters, a comment in the file is recognized only if # is followed by white
+space or the end of the line.
+
+4. Host lists may now contain network items, as in the former net list options,
+which have all been abolished. The only form of network masking is the /n
+variety. Negation and bare file names can appear in host lists, and there is a
+new type of item which allows masked network numbers to be used as keys in
+lookups, thus making it possible to used DBM files for faster checking when the
+list of networks is large.
+
+The complete list of types of item which can now appear in a host list is:
+
+. An item may be a bare file name; each line of the file may take the form of
+  any of the items below, but it may not itself be another bare file name. If
+  the file name is preceded by ! then all items in the file are negated, unless
+  they are preceded by another exclamation mark. Comments in the file are
+  introduced by # and blank lines are ignored.
+
+. If the entire item is "*" it matches any host.
+
+. If the item is in the form of an IP address, it is matched against the IP
+  address of the incoming call.
+
+. If the item is in the form of an IP address followed by a slash and a mask
+  length (e.g. 131.111.0.0/16) then it is matched against the IP address of the
+  incoming call, subject to the mask.
+
+. If the item is of the form "net<number>-<search-type>;<search-data>", for
+  example:
+
+    net24-dbm;/networks.db
+
+  then the IP address of the incoming call is masked using <number> as the mask
+  length; a textual string is then constructed from the masked value, followed
+  by the mask, and this is then used as the key for the lookup. For example, if
+  the incoming IP address is 192.152.34.6 then the key that is looked up for
+  the above example is "192.152.34.0/24".
+
+. If the entire item is "@" the primary host name is used as the the match
+  item, and the following applies:
+
+. If the item is a plain domain name, then a forward DNS lookup is done on that
+  name to find its IP address(es), and the result is compared with the IP
+  address of the incoming call.
+
+The remaining items require the host name to be obtained by a reverse DNS
+lookup. If the lookup fails, Exim takes a hard line by default and access is
+not permitted. If the list is an "accept" list, Exim behaves as if the current
+host is not in the set defined by the list, whereas if it is a "reject" list,
+it behaves as if it is.
+
+To change this behaviour, the special item "+allow_unknown" may appear in the
+list (at top level - it is not recognized in an indirected file); if any
+subsequent items require a host name, and the reverse DNS lookup fails, Exim
+permits the access, that is, its behaviour is the opposite to the default.
+
+. If the item starts with "*" then the remainder of the item must match the end
+  of the host name. For example, *.b.c matches all hosts whose names end in
+  .b.c. This special simple form is provided because this is a very common
+  requirement. Other kinds of wildcarding require the use of a regular
+  expression.
+
+. If the item starts with "^" then it is taken to be a regular expression which
+  is matched against the host name. For example, ^(a|b)\.c\.d$ matches either
+  of the two hosts a.c.d or b.c.d. If the option string in which this occurs is
+  given in quotes, then the backslash characters must be doubled, because they
+  are significant in quoted strings. The following two settings are exactly
+  equivalent:
+
+    host_accept = ^(a|b)\.c\.d$
+    host_accept = "^(a|b)\\.c\\.d$"
+
+. If the item is of the form <search-type>;<filename or query>, for example
+
+    dbm;/host/accept/list
+
+  then the host name is looked up using the search type and file name or query
+  (as appropriate). The actual data that is looked up is not used.
+
+5. Early versions of Exim required commas and semicolons to terminate option
+settings in drivers. This hasn't been the case for quite some time. The code to
+handle them has now been removed.
+
+
+Details of option changes at 3.00
+=================================
+
+Main options
+------------
+
+  * address_directory_transport, address_directory2_transport,
+    address_file_transport, address_pipe_transport, and address_reply_transport
+    have been abolished as obsolete. The aliasfile and forwardfile directors
+    have been able for some time to set the transports they want to use for
+    these special kinds of delivery; there seems little need for global
+    defaults. The default configuration has been altered to add settings for
+    file_transport and pipe_transport to the aliasfile and forwardfile
+    directors, and to add reply_transport to forwardfile.
+
+  * check_dns_names, a deprecated synonym for dns_check_names, has been
+    abolished.
+
+  * helo_accept_junk_nets is abolished; nets can now appear in
+    helo_accept_junk_hosts.
+
+  * helo_verify_except_hosts and helo_verify_except_nets have been abolished,
+    and helo_verify has been changed from a boolean to a host list, listing
+    those hosts for which HELO verification is required.
+
+  * the obsolete option helo_verify_nets (a synonym for host_lookup_nets) has
+    been abolished. Note that host_lookup_nets itself has been replaced by
+    host_lookup.
+
+  * hold_domains_except has been abolished. Use negated items in hold_domains.
+
+  * host_lookup_nets has been replaced by host_lookup, which can contain hosts
+    and nets.
+
+  * ignore_fromline_nets has been replaced by ignore_fromline_hosts.
+
+  * If message_filter is set and the filter generates any deliveries to files,
+    pipes, or any autoreplies, then the appropriate message_filter_*_transport
+    options must be set to define the transports, following the abolition of
+    the global defaults (see above).
+
+  * queue_remote and queue_remote_except have been abolished and replaced by
+    queue_remote_domains, which lists those domains that should be queued. The
+    effect of queue_remote=true is now obtained by queue_remote_domains=*.
+
+  * queue_smtp and queue_smtp_except have been abolished and replaced by
+    queue_smtp_domains, which lists those domains that should be queued after
+    routing. The effect of queue_smtp=true is now obtained by
+    queue_smtp_domains=*.
+
+  * rbl_except_nets has been abolished and replaced by rbl_hosts, which can
+    contain hosts and nets. This defaults to "*" and defines the set of hosts
+    for which RBL checking is done.
+
+  * receiver_unqualified_nets is abolished; nets can now appear in
+    receiver_unqualified_hosts.
+
+  * receiver_verify_except_hosts and receiver_verify_except_nets have been
+    abolished and replaced by receiver_verify_hosts, which defaults to "*".
+    This is used, however, only when receiver_verify is set - together with the
+    other conditions (receiver_verify_addresses, receiver_verify_senders).
+
+  * receiver_verify_senders_except has been abolished; the functionality is now
+    available by using negation in receiver_verify_senders.
+
+  * rfc1413_except_hosts and rfc1413_except_nets have been abolished, and
+    replaced by rfc1413_hosts, which defaults to "*".
+
+  * sender_accept, sender_accept_recipients and sender_reject_except have
+    been abolished; the functionality is now available via sender_reject and
+    sender_reject_recipients.
+
+  * sender_host_accept, sender_net_accept, sender_host_reject,
+    sender_net_reject, sender_host_reject_except, sender_net_reject_except,
+    sender_host_reject_recipients and sender_net_reject_recipients
+    have all been abolished, and replaced by the options host_reject and
+    host_reject_recipients.
+
+  * sender_host_accept_relay, sender_net_accept_relay,
+    sender_host_reject_relay, sender_host_reject_relay_except,
+    sender_net_reject_relay, and sender_net_reject_relay_except are abolished,
+    and replaced by host_accept_relay. This defaults unset, and this means that
+    all relaying is now by default locked out in the Exim binary. Previously,
+    if no relaying options were set, relaying was permitted.
+
+  * sender_unqualified_nets has been abolished; nets can now appear in
+    sender_unqualified_hosts.
+
+  * sender_verify_except_hosts and sender_verify_except_nets have been
+    abolished and replaced by sender_verify_hosts, which defaults to "*". This
+    is used, however, only when sender_verify is set (to make it similar to
+    receiver_verify, even though there aren't at present any other conditions.)
+
+  * sender_verify_log_details has been abolished. This was a little-used
+    debugging option.
+
+  * smtp_etrn_nets has been abolished; nets can now appear in smtp_etrn_hosts.
+
+  * smtp_expn_nets has been abolished; nets can now appear in smtp_expn_hosts.
+
+  * smtp_log_connections, a deprecated synonym for log_smtp_connections, has
+    been abolished.
+
+  * smtp_reserve_nets is abolished; nets can now appear in smtp_reserve_hosts.
+
+Generic director and router options
+-----------------------------------
+
+  * except_domains, except_local_parts, and except_senders have been abolished.
+    Use negated items in domains, local_parts, and senders instead, for
+    example, replace
+
+      except_domains = a.b.c
+
+    with
+
+      domains = !a.b.c
+
+    If you already have a domains setting, add any negative items to the front
+    of it.
+
+The aliasfile director
+----------------------
+
+  * The option "directory", an obsolete synonym for home_directory, has been
+    abolished.
+
+The forwardfile director
+------------------------
+
+  * The option "directory", an obsolete synonym for file_directory, has been
+    abolished.
+
+  * The option forbid_filter_log, an obsolete synonym for
+    forbid_filter_logwrite, has been abolished.
+
+The localuser director
+----------------------
+
+  * The option "directory", an obsolete synonym for match_directory, has been
+    abolished.
+
+The lookuphost router
+---------------------
+
+  * mx_domains_except and its obsolete old name non_mx_domains have been
+    abolished. Use negated items in mx_domains.
+
+The pipe transport
+------------------
+
+  * The option "directory", an obsolete synonym for home_directory, has been
+    abolished.
+
+The smtp transport
+------------------
+
+  * mx_domains_except and its obsolete old name non_mx_domains have been
+    abolished. Use negated items in mx_domains.
+
+  * serialize_nets has been abolished; nets may now appear in serialize_hosts.
+
+
+Other items relevant to upgrading from Exim 2.12
+================================================
+
+1. RFC 2505 (Anti-Spam Recommendations for SMTP MTAs) recommends that the
+checking of addresses for spam blocks should be done entirely caselessly.
+Previously, although Exim retained the case of the local part, in accordance
+with the RFC 821 rule that local parts are case sensitive, some of the string
+comparisons were nevertheless done caselessly, but file lookups used the
+unmodified address.
+
+The way addresses are compared with options whose values are address lists has
+been changed. At the start of the comparison, both the local part and the
+domain are now forced to lower case, and any comparisons that are done with
+in-line strings are done caselessly. For example,
+
+  sender_reject = A@b.c
+
+rejects both A@b.c and a@b.c. Any lookups that occur use lowercased strings as
+their keys. If the @@ lookup facility is used, the lookup is done on the lower
+cased domain name, but any subsequent string comparisons on local parts are
+done caselessly.
+
+To retain possibility of caseful matching, the pseudo-item "+caseful" can
+appear in an address list. It causes any subsequent items to do caseful matches
+on local parts. The domain, however, remains lower cased.
+
+2. The handling of incoming batched SMTP has been re-worked so as to behave in
+a more useful way in cases of error:
+
+  (i)   The option sender_verify_batch now defaults false.
+  (ii)  EOF is no longer interpreted as end-of-message; the "." line must be
+        present.
+  (iii) Exim stops immediately in cases of error, writing information to stdout
+        and stderr, and setting the return code to 1 if some messages have been
+        accepted, and 2 otherwise.
+
+3. The first message delivered by -R, and all messages delivered by -Rf and -qf
+are "forced" in the sense that retry information is over-ridden. Previously,
+Exim also forcibly thawed any of these messages that was frozen. This no longer
+happens. Additional options -Rff and -qff have been implemented to force
+thawing as well as delivery.
+
+4. When recipients are being rejected because the sending host is in an RBL
+list, Exim used just to show the RBL text, if any, as part of the rejection
+response. Now, if prohibition_message is set, it expands that string instead,
+with the RBL message available in $rbl_text, and $prohibition_reason set to
+"rbl_reject".
+
+5. When a trusted caller passed a message to Exim, it used to check the From:
+header against the caller's login (even though the caller was trusted) unless
+the -f option had been used to supply a different sender. This has been changed
+so that From: is never checked if the caller is trusted.
+
+Philip Hazel
+May 1999
+
diff --git a/doc/Exim4.upgrade b/doc/Exim4.upgrade
new file mode 100644
index 0000000..86d4a4d
--- /dev/null
+++ b/doc/Exim4.upgrade
@@ -0,0 +1,1734 @@
+Upgrading Exim from Release 3.33 to 4.xx
+----------------------------------------
+
+Exim 4.00 represents the largest upheaval in Exim's history. There are a lot of
+changes to the way some parts of Exim work, and a lot of incompatible changes
+to the run time configuration file.
+
+This document is in two parts. The first part contains instructions and
+suggestions for how you might go about performing the upgrade. The second part
+is a brief list of all the changes that have taken place. For full details of
+all the new features, please consult the current version of the reference
+manual.
+
+
+HOW TO UPGRADE YOUR EXIM
+------------------------
+
+When you compile Exim 4, a Perl script called convert4r4 is built in the build
+directory. It is not installed by the install script, because it is likely that
+you will run it only once.
+
+This script is provided to assist in updating Exim configuration files. It
+reads an Exim 3 configuration file on the standard input, and writes a modified
+file on the standard output. It also writes comments about what it has done to
+the standard error file. It assumes that the input is a valid Exim 3
+configuration file. A typical call to the conversion script might be
+
+  ./convert4r4  </etc/exim/configure  >/etc/exim/configure.new
+
+The output file MUST be checked and tested before trying to use it on a live
+system. The conversion script is just an aid which does a lot of the "grunt
+work". It does not guarantee to produce an Exim 4 configuration that behaves
+exactly the same as the Exim 3 configuration it reads.
+
+Each option change in the new file is preceded by an identifying comment. In
+fact, the conversion script tends to make quite a mess of your configuration,
+and you should expect to go through it afterwards and tidy it up by hand.
+
+Unless you are running a very straightforward configuration, the automatic
+conversion is likely to generate a non-optimal configuration. You should not
+only check it thoroughly, but also run as many tests as you can, to ensure that
+it is working as you expect. In particular, you should test address routing,
+using -bt and -bv, and the policy controls, using -bh. If possible, you should
+also do some live tests (i.e. send and receive some messages) before putting
+Exim 4 into service.
+
+If you have a very complicated configuration, it is possible that convert4r4
+will break it in some situations, which is why thorough testing is strongly
+recommended.
+
+                   *********************************
+                   ***** You Have Been Warned ******
+                   *********************************
+
+
+HOW TO MOVE FROM AN EXIM 3 RELEASE TO AN EXIM 4 RELEASE
+-------------------------------------------------------
+
+One way of upgrading to Exim 4 from a version 3 release is as follows:
+
+1. Suppose your run time configuration file is called /usr/exim/configure, and
+   you want to continue with this name after upgrading. The first thing to do
+   is to make another copy of this file called, say, /usr/exim/configure.r3.
+
+2. Rebuild your existing Exim to use the copy of the run time configuration
+   file instead of the standard file. Install this version of Exim and HUP your
+   daemon. You can check on the name of the configuration file by running
+
+     exim -bP configure_file
+
+   Ensure that everything is running smoothly. You now have something you can
+   fall back to. IMPORTANT: when you do this re-install, you should also
+   re-install the utilities because four of them (exicyclog, eximon, exinext,
+   and exiwhat) also refer to the configuration file.
+
+3. Build the new release, configured to use the standard configuration file.
+
+4. Use the convert4r4 utility to upgrade your configuration file for the new
+   release. After running the conversion utility, check the file by hand, and
+   tidy it up.
+
+5. Test, test, test! And test some more!
+
+6. You can run complete tests, including actual deliveries, from an uninstalled
+   binary, but you have to tell it where it is, so that any re-executions can
+   be done. You can do this by temporarily inserting a setting such as
+
+   exim_path = /source/exim/exim-4.00/build-SunOS5-5.8-sparc/exim
+
+   into the run time configuration. If you want to, you can also insert
+   settings for spool_directory and log_file_path to divert those away from
+   their normal places. Remember to remove these temporary settings when you
+   eventually install the binary for real.
+
+7. The new installation script installs the new release as exim-4.00-1, and
+   set a symbolic link called "exim" to point to it. The old version of Exim
+   will be renamed to something like exim-3.33-1.
+
+8. You can now easily change between the new and old releases simply by moving
+   the symbolic link and HUPping your daemon. The format of message files on
+   Exim's spool has _not_ changed, so there should be no problem in changing
+   between releases while there are messages on the queue.
+
+9. HOWEVER: If you do change back and forth between releases, you must also
+   change the utilities exicyclog, eximon, exinext, and exiwhat if you are
+   going to use them. Installing Exim 4 will have left the old versions with a
+   .O suffix. It might be helpful to rename these so that you don't lose them.
+
+
+WHAT HAS NOT CHANGED IN EXIM 4.00
+---------------------------------
+
+The basic overall philosophy, design, and process structure has not changed.
+The format of spool files is the same. The transports have had only minor
+modifications. The command line options remain the same, with a couple of
+additions.
+
+The general run time configuration approach has not changed, but the actual
+details of the configuration file are different.
+
+The Exim monitor has not changed, and there have been only very minor changes
+to other Exim utilities.
+
+
+WHAT HAS CHANGED IN EXIM 4.00
+-----------------------------
+
+The rest of this document lists the very many changes that have taken place.
+I'm going to give only brief details here, because this part of the document is
+intended as a way of alerting you to areas of difference. The reference manual
+describes how the new features work in detail.
+
+
+Named domain, host, address, and local part lists
+-------------------------------------------------
+
+A new feature makes it possible to give names to lists of domains, hosts,
+addresses, and local parts. The syntax used is
+
+  domainlist    <name> = <a domain list>
+  hostlist      <name> = <a host list>
+  addresslist   <name> = <an address list>
+  localpartlist <name> = <a list of local parts>
+
+For example:
+
+  domainlist  local_domains = *.my.domain
+  addresslist bad_senders = cdb;/etc/badsenders
+
+These lists are referenced in options by giving the name preceded by a + sign.
+For example, in a router you might have
+
+  domains = +local_domains
+
+At first sight, these lists might seem to be the same as macros, but they are
+not. Macros are just textual substitutions. If you write
+
+  ALIST = host1 : host2
+  auth_advertise_hosts = !ALIST
+
+it probably won't do what you want, because that is exactly the same as
+
+  auth_advertise_hosts = !host1 : host2
+
+Notice that the second host name is not negated. However, if you use a host
+list, and write
+
+  hostlist alist = host1 : host2
+  auth_advertise_hosts = ! +alist
+
+the negation applies to the whole list, and so that is equivalent to
+
+  auth_advertise_hosts = !host1 : !host2
+
+These named lists also have a performance advantage. When Exim is routing an
+address or checking an incoming message, it caches the result of tests on the
+lists. So, if you have a setting such as
+
+  domains = +local_domains
+
+on several of your routers, the actual test is done only for the first one.
+However, this caching works only if there are no expansions within the list
+itself or any sublists that it references. In other words, caching happens only
+if the list is known to be the same each time it is referenced.
+
+By default, there may be up to 16 named lists of each type. This limit can be
+extended by changing a compile-time variable.
+
+The use of domain and host lists is recommended for concepts such as local
+domains, relay domains, and relay hosts. The default configuration is set up
+like this.
+
+
+Processing of domain, host, local part, and address lists
+---------------------------------------------------------
+
+The handling of these lists is now more uniform. Every list is expanded as a
+single string before it is used. (In Exim 3, some options were expanded and
+some weren't, and query-style lookup items were then re-expanded.)
+
+If an expansion is forced to fail, Exim behaves as if the item has not been
+found in the list.
+
+The confusing $key variable has been abolished. When processing a domain list,
+$domain contains the relevant domain and can be used in generating database
+queries. Other appropriate variables are set when processing other kinds of
+list; $sender_host and $sender_host_address for checking incoming hosts and
+$host and $host_address for checking outgoing hosts.
+
+Note that this means that any \ and $ characters in regular expressions must be
+escaped if they appear in one of these lists. The new expansion feature to turn
+off expansion (\N ... \N) which is described below can be helpful here.
+
+IMPORTANT: The details of the processing of address lists has been revised. In
+particular, the handling of the case of an item that is a single-key lookup has
+changed. It no longer looks up the domain on its own before looking up the
+complete address. You need to supply an explicit "*@" before the lookup if you
+want just the domain to be looked up. Please check the manual for full details.
+
+If an item in a host list is the empty string, it matches only when no host is
+defined. If used when checking an incoming message, it matches only when the
+message is arriving by SMTP on the standard input from a local process (using
+-bs). This provides a way of distinguishing between SMTP mail from local
+processes and from remote hosts.
+
+The +allow_unknown and +warn_unknown settings for host lists have been replaced
+by a single item, +include_unknown. By default, failure to find a host name
+when needed causes Exim to behave as if the host does not match the list, but
+if +include_unknown is set, the opposite behaviour happens. Whenever
++include_unknown is invoked, the incident is logged.
+
+
+Merge of Directors and Routers
+------------------------------
+
+There are no longer any directors in Exim 4. There are just routers. All
+addresses are passed to a single list of routers which typically makes use of
+the "domains" option to choose which way to handle specific groups of domains.
+
+A consequence of this is that the code no longer contains any concept of "local
+domains". However, a typical configuration will probably define a named domain
+list (see above) called local_domains, and use it to control routing something
+like this:
+
+  route_remote:
+    driver = dnslookup
+    domains = ! +local_domains
+    transport = remote_smtp
+    no_more
+
+  system_aliases:
+    ....
+
+The first router does DNS routing for all domains that are not in the named
+list of local domains, and no_more ensures that it is the last router for those
+domains. All other domains fall through to the system_aliases and subsequent
+routers. For a complete configuration example, look at the default
+configuration file in src/configure.default.
+
+
+Router Actions
+--------------
+
+The concept of how the routers work is as follows:
+
+A number of pre-conditions are tested (details below). If any of them fails,
+control is passed to the next router. We say "the router is skipped". Otherwise
+the router is run, and can yield one of several different results:
+
+. accept: The router accepts the address, and either queues it for a transport,
+or generates one or more "child" addresses. Processing the original address
+ceases, unless "unseen" is set on the router, in which case the address is
+passed to the next router. Processing of any child addresses starts with the
+first router by default, or at the router defined by redirect_router if it is
+set. This may be any router in the list.
+
+. decline: The router declines to accept the address because it does not
+recognize it at all. The address is passed to the next router, unless no_more
+is set, in which case the address fails.
+
+. pass: The router recognizes the address, but cannot handle it itself. It
+requests that the address be passed to another router. This overrides no_more.
+By default the address is passed to the next router, but this can be changed by
+setting pass_router. However, in this case (unlike redirect_router) the named
+router must be below the current router (to avoid loops).
+
+. fail: The router determines that the address should fail, and queues it for
+the generation of a bounce message. There is no further processing of the
+original address, unless "unseen" is set.
+
+. defer: The router cannot handle the address at the present time. (For
+example, a database may be offline.) No further processing of the address
+happens in this delivery attempt. It is tried again next time.
+
+. error: There is some error in the router (for example, a syntax error in
+its configuration). The action is as for defer.
+
+
+Router pre-conditions
+---------------------
+
+In Exim 3 there are some strange interactions between the generic options that
+test things before running a director or router and the no_more test that
+happens afterwards.
+
+In Exim 4 it is all more straightforward. If any of the pre-condition tests
+fail, the router is skipped and control passes to the next router. The no_more
+option has an effect only if the router is actually run - that is, if all the
+pre-condition tests succeed. The order in which these tests are run is:
+
+  verify status, expn status, domains, local_parts, check_local_user
+
+If all those match, the debug_print string is output when debugging. Exim then
+goes on to test
+
+  senders, require_files, condition
+
+Note that require_files comes near the end of the list, so you cannot use it to
+check for the existence of a file in which to lookup up a domain, local part,
+or sender. However, as these options are all expanded, you can use the "exists"
+expansion condition to make such tests. The require_files option is intended
+for checking files that the router may be going to use internally, or which are
+needed by a specific transport (e.g. .procmailrc).
+
+In Exim 4, local part prefixes and suffixes are recognized and removed before
+any of the other pre-condition tests are done (in Exim 3 they were removed
+afterwards). Note that this means that the local_parts option now tests the
+local part without its prefix or suffix.
+
+If you want to use local parts that include any affixes in a pre-condition
+test, you can do so by using a "condition" option that uses the variables
+$local_part, $local_part_prefix, and $local_part_suffix as necessary.
+
+
+A New Set of Routers
+--------------------
+
+The two sets of routers and directors of Exim 3 have been replaced by a single
+set of routers for Exim 4. These are as follows:
+
+. accept        Always accepts an address. It has no private options.
+
+. dnslookup     Routes by DNS lookup (descended from lookuphost).
+
+. ipliteral     Routes IP literal addresses (unchanged).
+
+. iplookup      Special-purpose lookup router (unchanged).
+
+. manualroute   Routes domains from explicit data (descended from domainlist).
+
+. queryprogram  Routes addresses by running a program (detail changed).
+
+. redirect      Redirects addresses; handles all the functions previously
+                supported by aliasfile, forwardfile, and smartuser without
+                a transport.
+
+
+Saving duplication of effort while routing
+------------------------------------------
+
+Early versions of Exim used to copy the routing of one address for all other
+addresses in the same domain, thereby possibly saving some repeated DNS
+lookups. This feature was removed for release 2.12, after the possibility of
+varying the router actions according to the local part (the local_parts option)
+was added. (In fact, the use of $local_part could have broken it earlier.)
+
+For Exim 4, I have added an option called same_domain_copy_routing to the
+dnslookup and manualroute routers. When one of these routers routes an address
+to a remote transport and this option is set, any other addresses in the
+message that have the same domain are automatically given the same routing, but
+only if the router does not set headers_add or headers_remove, and does not
+`widen' the domain during the routing.
+
+
+Generic Router Options
+----------------------
+
+. The global locally_caseless option is replaced by a generic router option
+  called caseful_local_part. By default, routers handle local parts caselessly.
+
+. check_local_user is now a generic option that is needed to check for a local
+  account. Typically used on redirect (for user's forward files) and on accept
+  (for local deliveries).
+
+. The setting self=local has been removed (since there's no concept of local
+  domains in the code). The same kind of effect can be achieved by using
+  self=reroute or self=pass.
+
+. expn is now a generic router option.
+
+. local_part_prefix and local_part_suffix are now generic router options,
+  replacing prefix and suffix on directors.
+
+. Exim 3 has two logging styles for delivery, depending on whether the domain
+  is a local domain or not. For local domains, the address is given just as the
+  local part - this makes these deliveries easier to spot in the log. In Exim 4
+  there's no concept of local domains, so this functionality cannot be
+  automatic. Instead, there's a generic router option called log_as_local which
+  requests "local-style" logging. This option defaults on for the "accept"
+  router, and off for all the others.
+
+. There's an option called retry_use_local_part which is the default for any
+  router that has check_local_user set, and it applies to routing delays. (The
+  same option for transports applies to transport delays.)
+
+. transport_home_directory and transport_current_directory are new generic
+  options on all routers. They set up default values for home_directory and
+  current_directory on the transport to which they route an address. Any
+  settings in the transport override.
+
+. If transport_home_directory is not set, but check_local_user is set, the
+  user's home directory is used as a default value.
+
+. The special fudge that exists in Exim 3 for handling home_directory settings
+  in forwardfile directors is not needed in Exim 4. It has therefore been
+  removed.
+
+. The new_director option in Exim 3 allows the direction of redirected
+  addresses to start at a given director, instead of the first one. In Exim 4,
+  this option is now called redirect_router. The option is used when a redirect
+  router succeeds, and when a queryprogram router returns a "redirect"
+  response.
+
+. There is a new option called pass_router, which specifies the router to go to
+  when a router "passes" on an address. The named router must follow the
+  current router (to avoid routing loops). Note: if a router declines, control
+  always passes to the next router, unless no_more is set.
+
+. There is a new router option called address_data. This is set to a string
+  which is expanded just before the router is run, that is, after all the
+  pre-tests have succeeded. If the expansion is forced to fail, the router
+  declines. Other expansion failures cause delivery of the address to be
+  deferred.
+
+  When the expansion succeeds, the value is retained with the address, and can
+  be accessed using the variable $address_data. Even if the router declines or
+  passes, the value remains with the address, though it can be changed by
+  another address_data setting on a subsequent router. If a router generates
+  child addresses, the value of $address_data propagates to them.
+
+  The idea of address_data is that you can use it to look up a lot of data for
+  the address once, then then pick out parts of the data later. For example,
+  you could use an LDAP lookup to return a string of the form
+
+    uid=1234 gid=5678 mailbox=/mail/xyz forward=/home/xyz/.forward
+
+  In the transport you could then pick out the mailbox by a setting such as
+
+    file = ${extract{mailbox}{$address_data}}
+
+  This makes the configuration file less messy, and also reduces the number of
+  lookups. (Exim does cache the most recent lookup, but there may be several
+  addresses with different lookups.)
+
+. When a transport is run for several addresses simultaneously, the values of
+  $address_data, $local_part_data, and $domain_data are taken from the first
+  address that the transport handles. However, the order in which multiple
+  addresses are processed is not defined. You therefore need to be careful if
+  you want to use these variables with multiple addresses. The smtp transport
+  is the only one which by default handles multiple addresses.
+
+. When an address is routed by a router with the "unseen" option set, a "clone"
+  address is created, and it starts being routed at the next router. (This is
+  what people expect. In Exim 3 it starts at the top - in simple cases that has
+  the same effect because of the anti-looping rule, but if aliases are involved
+  it sometimes doesn't do what you want.)
+
+. The way that require_files works has been changed. Each item in the list is
+  now separately expanded as the test proceeds. The use of leading ! and +
+  characters is unchanged. However, user and group checking is done differently.
+  Previously, seteuid() was used, but seteuid() is no longer used (see
+  "Security" below) for checking the files required by this option. Instead,
+  Exim now scans along the components of the file path and checks the access
+  for the given uid and gid. It expects "x" access on directories and "r" on
+  the final file. This means that file access control lists (on those
+  operating systems that have them) are ignored.
+
+
+Other Consequences of the Director/Router Merge
+-----------------------------------------------
+
+. The -odqr option is abolished, as there is no inbuilt concept of remote
+  domains.
+
+. The -odqs option is equivalent to queue_smtp_domains = *.
+
+. queue_remote_domains is renamed queue_domains, and applies to any domain.
+
+. The -ql option now suppresses remote delivery; routing always happens.
+
+. The "remote" facility of queue_only_file has been removed.
+
+. The match_directory option for forwardfile and localuser has been entirely
+  abolished. Its function can be achieved using the "condition" option in
+  conjunction with check_local_user.
+
+. When an address is being verified, if it is redirected to a single new
+  address, verification continues with that address. If it is redirected to
+  more than one address, verification ceases with a success result. (In Exim 3,
+  this applied only to aliasing, not to forwarding.)
+
+
+The dnslookup router
+--------------------
+
+This router replaces the lookuphost router of Exim 3. It is much the same,
+except that the "gethostbyname" option has been removed. It now does only DNS
+routing - hence the change of name. Routing using gethostbyname() can be done
+by the manualroute router.
+
+
+The manualroute router
+----------------------
+
+This is the new name for the domainlist router, supposedly to make its function
+clearer and to avoid confusion with the "domainlist" that is used to set up
+named domain lists. Several things have been removed and reorganized.
+
+. The old search mechanism (route_file, route_query, route_queries,
+  search_type) have been removed. Instead there is a new option called
+  route_data, which is an expanded string. It should expand to a single routing
+  entry. If the expansion ends up empty (or is forced to fail), the router
+  declines. The route_list option still exists, for convenient listing of a few
+  inline routes.
+
+. There is no longer any MX processing function in this router. The keywords
+  bydns_mx and bydns_a have been removed, leaving just
+
+    bydns  => find IP addresses from address records in the DNS
+    byname => find IP addresses by calling gethostbyname()
+
+  The default lookup type is "byname", and this can be omitted from a route
+  data line. If an IP address is given, both "byname" and "bydns" are ignored
+  (so typically you omit this field).
+
+. The qualify_single and search_parents options have also been removed.
+
+. A transport is always required to be set, unless verify_only is set.
+
+. The host_find_failed option can be set to "decline", to cause the router to
+  decline if it can't find an IP address for a listed host.
+
+. If manualroute routes to a local transport, there is no need to specify
+  byname or bydns in the routing data. Any supplied host list is passed as a
+  string in $host, but $host_address is unset.
+
+
+The queryprogram router
+-----------------------
+
+This router has been re-designed:
+
+. You must now specify a user and group for the program to be run using
+  command_user and (if necessary) command_group. It no longer defaults to
+  "nobody". These options are expanded.
+
+. The command is now split up and each argument expanded separately, as happens
+  for the pipe transport. The command name is also expanded.
+
+. The return value "forcefail" has been renamed "fail", and it causes delivery
+  to fail. (The original usage of "fail" meaning "decline" has finally been
+  removed.)
+
+. The $route_option variable, which queryprogram used to be able to set has
+  been abolished. A facility to set the new $address_data variable replaces it.
+
+. The string returned from queryprogram must now be one of:
+
+  DECLINE
+  FAIL text
+  DEFER text
+  PASS
+  FREEZE text
+  REDIRECT text
+  ACCEPT TRANSPORT=transport HOSTS=host list LOOKUP=byname|bydns DATA=text
+
+The text returned for "redirect" is a list of new addresses. The text for FAIL
+is returned in the SMTP dialogue when the router is run as part of address
+verification. It is also logged. The text for DEFER and FREEZE is just logged.
+
+The data items in the "accept" return can be given in any order, and all are
+optional. If no transport is included in the "accept" return, the router's
+default transport is used. The host list and lookup type are needed only if the
+transport is an smtp transport that does not itself have a host list. The
+default lookup type is "byname". If the "data" field is set, its value is
+placed in the $address_data variable.
+
+
+The redirect router
+-------------------
+
+This router replaces forwardfile, appendfile, and the use of smartuser without
+a transport. It has two mutually exclusive options for specifying the data that
+it uses. If "file" is set, the data is taken from a file. Otherwise "data" must
+be set, and the data is the expanded value of that option.
+
+The data may be an alias list, possibly including special entries such as
+:fail:, or it may be a list of filtering instructions.
+
+If "file" is set, but the file does not exist or is empty, or its contents have
+no effect (entirely comments, or a filter that does nothing), the router
+declines. This also happens if the expansion of "file" is forced to fail. Any
+other expansion failure causes the router to defer.
+
+Ownership of the file is checked if check_local_user is set or if owners is
+set, unless check_owner is explicitly set false.
+
+Likewise, the group is checked if owngroups is set, or if check_local_user is
+set and a modemask not containing 020 is set, unless check_group is explicitly
+set false.
+
+If "data" is set, a forced expansion causes the router to decline. This also
+happens if "data" is an empty string or a string that causes nothing to be
+generated and no action to be taken.
+
+Because "data" is now used for traditional /etc/aliases lookups, an empty alias
+no longer gives an error. It behaves in the same way as :unknown: (which is
+still recognized, but ignored).
+
+. If no_repeat_use is set, the router is skipped if _any_ ancestor of the
+  current address was routed by this router. This pre-test happens before any
+  of the others. (Contrast the default loop avoidance logic, which skips a
+  router if an ancestor with the same local part was routed by the router.)
+
+. If include_directory is set, :include: files are constrained to this
+  directory.
+
+. When an address is redirected to a file or a pipe, $address_file or
+  $address_pipe (as appropriate) is set when expanding the value of
+  file_transport or directory_transport.
+
+. There are new options forbid_filter_readfile and forbid_filter_run to lock
+  out the use of the new ${readfile and ${run expansion items in filters.
+
+. If one_time is set, forbid_pipe, forbid_file, and forbid_filter_reply are
+  forced to be true, and headers_add and headers_remove are forbidden.
+
+
+Generic transport options
+-------------------------
+
+. All remote deliveries are now done in subprocesses running with specified
+  UIDs and GIDs. (Formerly, only remote parallel deliveries were done in
+  subprocesses.) As a result, user and group are now generic options that can
+  be used on all transports. The default for both local and remote transports
+  is to run as the Exim user and group. For remote transports, this should not
+  normally be changed, but if it is, the user or group should be able to access
+  the hints databases, though failure to open a hints database is always
+  ignored.
+
+  If it turns out that a transport user is in the never_users list, Exim now
+  defers delivery and writes to the panic log. (Previously it just ran the
+  delivery as "nobody".) Because subprocesses (usually running as "exim")
+  are now always used for remote deliveries, you should *not* include "exim" in
+  the never_users list.
+
+. initgroups is now also a generic transport option.
+
+. home_directory and current_directory are generic options on all transports,
+  though some transports (e.g. smtp) make no use of them. If they are unset,
+  values supplied by the router are used.
+
+. The message_size_limit option is now expanded, which makes it possible to
+  have different limits for different hosts, for example.
+
+
+Multiple (batch) deliveries in the appendfile, lmtp, and pipe transports
+------------------------------------------------------------------------
+
+The options controlling batch deliveries, including BSMTP, were a mess, and
+have been reworked.
+
+. The batch option has been removed from all three transports, and the bsmtp
+  and bsmtp_helo options have been removed from appendfile and pipe.
+
+. The batch_max option defaults to 1 in all three transports.
+
+. A new option called use_bsmtp has been added to appendfile and pipe. When
+  set, the message is delivered in BSMTP format. If you want to have a HELO
+  line at the start of the message, you can configure this by making use of the
+  message_prefix option. You must include the terminating newline.
+
+. A new option called batch_id has been added to all three transports.
+
+Batching is now achieved by setting batch_max to a value greater than 1. This
+is recommended for lmtp. When multiple addresses are routed to the same
+transport that has a batch_max value greater than one, the addresses are
+delivered in a batch, subject to certain conditions:
+
+. If any of the transport's options contain a reference to "$local_part", no
+  batching is possible.
+
+. If any of the transport's options contain a reference to "$domain", only
+  addresses with the same domain are batched.
+
+. If batch_id is set, it is expanded for each address, and only those addresses
+  with the same expanded value are batched.
+
+. Batched addresses must also have the same errors address (where to send
+  delivery errors), the same header additions and removals, the same user and
+  group for the transport, and if a host list is present, the first host must
+  be the same.
+
+
+The appendfile transport
+------------------------
+
+. The prefix and suffix options have been renamed message_prefix and
+  message_suffix to avoid confusion with address affixes. The default values,
+  which are suitable for mbox deliveries, now apply only if "file" is set and
+  use_bsmtp is not set. Otherwise, the default values for these options are
+  unset. They can, of course, always be overridden.
+
+. If "directory" is set (which means that "file" is not set), the check_string
+  and escape_string options now default unset.
+
+. The require_lockfile options has been abolished. If use_lockfile is set, a
+  lock file is always required.
+
+. The quota_filecount option is now expanded.
+
+. The create_file option now also applies when delivering into an individual
+  file in a given directory, as well as when appending to a single file. In the
+  case of maildir delivery, the restriction applies to the top directory of the
+  maildir folder.
+
+. There's a new option called directory_file which is expanded to form the
+  final leaf name of files when "directory" is set, but neither maildir nor
+  mailstore is set. The default is "q${base62:$tod_epoch}-$inode", which
+  reproduces the old fixed value. The variable $inode is available only when
+  expanding this new option.
+
+
+The pipe transport
+------------------
+
+. The prefix and suffix options have been renamed message_prefix and
+  message_suffix to avoid confusion with address affixes. The default values
+  that are suitable for vacation deliveries now apply only if use_bsmtp is not
+  set. Otherwise the default values for these options are unset. They can, of
+  course, always be overridden.
+
+
+The smtp transport
+------------------
+
+. The badly-named batch_max option is now called connection_max_messages.
+
+. If hosts_randomize is set, it now affects host lists that come from a router
+  as well as the contents of the "hosts" option, but only if the hosts were not
+  obtained from MX records. Typically, such lists come from the manualroute
+  router. This change means that the router can provide the same host list for
+  multiple addresses - causing them all to be sent to the transport at once.
+  Randomizing is then done each time the transport is called. (If you set
+  hosts_randomize on the router, the randomizing happens for each address.)
+
+. The way that smtp operates when there are multiple addresses to be sent to
+  the same host is now different. Previously, the transport was called many
+  times, with a maximum of max_rcpt addresses per call. Each call made a new
+  connection to the host. When remote_max_parallel = 1, all the addresses are
+  now passed to the transport at once. It makes a single TCP/IP call, but may
+  send multiple copies of the message, each with no more than max_rcpt
+  recipients.
+
+  When remote_max_parallel is greater than 1, a heuristic is used. The number
+  of addresses passed to a single call of the transport is limited to
+
+    (the total number of recipients) / (the value of remote_max_parallel)
+
+  so, for example, if there are 100 recipients and remote_max_parallel is 2, no
+  more than 50 are passed in one call, even if max_rcpt is 100. (The idea is
+  that the other 50 will be passed to another call running in parallel.)
+
+  There is an option of the smtp transport called connection_max_messages
+  which limits the number of messages, or copies of a message, that Exim sends
+  down a single TCP/IP connection. This applies both to this mechanism for
+  multiple copies of a single message, and the re-use of a TCP/IP connection
+  for sending other messages destined for the same host, after a delivery
+  delay. The default value is 500.
+
+. The "interface" option is now expanded. If the result is a forced failure or
+  an empty string, it is ignored. Otherwise, the result must be a list of IP
+  addresses. The first one of the correct type (IPv4 or IPv6) for the outgoing
+  connection is used. If there isn't one of the correct type, the option is
+  ignored.
+
+. At the start of running the transport, the value of $host is taken from the
+  first host in a multi-host list. However, just before the transport connects
+  to a host, the value is changed to refer to that particular host. (This
+  applies to $host_address as well.) This means that options such as helo_data
+  and the tls_options can be made host-specific.
+
+. The tls_verify_ciphers option has been renamed tls_require_ciphers, in order
+  to leave the word "verify" as something that refers to the verification of
+  certificates.
+
+. The resolution of hosts and fallback_hosts used to look up MX records. This
+  was some kind of ancient silliness that I recently noticed. These are
+  definitely hosts, not mail domains. Exim 4 just looks up address records.
+  As a consequence of this, the mx_domains option of the smtp transport is
+  removed.
+
+. The authenticate_hosts option has been renamed as hosts_try_auth. A new
+  option called hosts_require_auth has been added; if authentication fails for
+  one of these hosts, Exim does _not_ try to send unauthenticated. It defers
+  instead. The deferral error is detectable in the retry rules, so this can be
+  turned into a hard failure if required.
+
+
+The System Filter
+-----------------
+
+. The system filter options that were called message_filter_xxx have all been
+  renamed as system_filter_xxx.
+
+. The value of system_filter is expanded.
+
+. message_filter_directory_transport and message_filter_file_transport are now
+  both expanded before use. If the filter set up any file or pipe deliveries,
+  $address_file and $address_pipe are set as appropriate while doing the
+  expansions.
+
+. message_filter_directory2_transport has been removed. The effect of using
+  different directory-style transports can be achieved by specifying a suitable
+  expansion string to system_filter_directory_transport.
+
+. When a system filter added recipients to a message, Exim 3 added an
+  X-Envelope-To: header, listing the real recipients (up to 100). This has been
+  abolished because you can do this kind of thing using "headers_add" nowadays.
+
+. The "fail" command has been extended to allow for two different messages, one
+  for Exim's log and the other to be returned to the sender. The syntax is
+
+    fail "<<log message>>user message"
+
+  That is, if the first two characters of the message are "<<" the following
+  text, up to ">>", is written to the log, and the remainder is returned to the
+  user. If there is no log message, the user message is logged. The motivation
+  for this feature was to reduce the amount of text logged, while being able to
+  send quite long (maybe even multi-line) messages back to the sender.
+
+
+Changes to Lookups
+------------------
+
+. Oracle support is available. It works like the mysql and pgsql support,
+  except that there is no "database name" involved, and the "host name" field
+  is used for what is called "service name" in Oracle. This often looks like a
+  host name. Also, semicolons are not used at the end of an SQL query for
+  Oracle.
+
+. There's a new single-key lookup type called dsearch. It searches a directory
+  for a file whose name matches the key. The result of a successful search is
+  the key. One possible use of this could be for recognizing virtual domains.
+  If each domain is represented by a file whose name is the domain name, you
+  needn't make a separate list of the domains. You could test for them in an
+  ACL (see below), for example, by a line like this
+
+     accept domains = dsearch;/etc/virtual/domains
+
+. The format of LDAP output has been changed for cases where multiple
+  attributes are requested. The data for each attribute is now always quoted.
+  Within the quotes, the quote character, backslash, and newline are escaped
+  with backslashes and commas are used to separate multiple values for the
+  attribute. Thus, the string in quotes takes the same form as the output when
+  a single attribute is requested. If multiple entries are found, their data is
+  still separated by a newline.
+
+. There's a new expansion condition called ldapauth which exists so that the
+  LDAP authentication mechanism can be used for user authentication. It is
+  described under "string expansion" below.
+
+. Exim now supports ldaps:// URLs as well as ldap:// URLs. The former do LDAP
+  over TLS (i.e. encrypted) connections.
+
+. There is now support for the "whoson" mechanism for doing "POP-before-SMTP"
+  authentication. This is provided by new query-style lookup type called
+  "whoson", with queries that consist of IP addresses. For example, in an ACL
+  you can write
+
+    require condition = ${lookup whoson {$sender_host_address}{yes}{no}}
+
+
+Special items in domain and host lists
+--------------------------------------
+
+. In a domain list, the special item @ matches the primary host name, and the
+  special item @[] matches any local interface address enclosed in square
+  brackets (as in domain literal email addresses). The special item @mx_any
+  matches any domain that has an MX record pointing to the local host. The
+  special items @mx_primary and @mx_secondary are similar, except that the
+  first matches only when the primary MX is to the local host, and the second
+  only when the primary MX is not the local host, but a secondary MX is.
+
+. In a host list, the special item @ matches the primary host name, and the
+  special item @[] matches any local interface address (not in brackets).
+
+
+Access Control Lists (ACLs)
+---------------------------
+
+All the policy control options for incoming messages have been replaced by
+Access Control Lists (ACLs). These give more flexibility to the sysadmin, and
+allow the order of testing to be specified. For example, using an ACL, it is
+possible to specify "accept if authenticated, even if from an RBL host, but
+otherwise deny if from an RBL host", which is not possible in Exim 3.
+
+ACLs are defined in a new part of the configuration file, and given names.
+Which ones to run are controlled by a new set of options that are placed in the
+main part of the configuration.
+
+  acl_smtp_auth   specifies the ACL to run when AUTH is received
+  acl_smtp_data   specifies the ACL to run after a message has been received
+  acl_smtp_etrn   specifies the ACL to run when ETRN is received
+  acl_smtp_expn   specifies the ACL to run when EXPN is received
+  acl_smtp_rcpt   specifies the ACL to run when RCPT is received
+  acl_smtp_vrfy   specifies the ACL to run when VRFY is received
+
+The default actions vary. If acl_smtp_auth is not defined, AUTH is always
+accepted (and an attempt is made to authenticate the session). If acl_smtp_data
+is not defined, no checks are done after a message has been received, and it is
+always accepted at that point.
+
+However, if any of the others are not defined, the relevant SMTP command is
+rejected. In particular, this means that acl_smtp_rcpt must be defined in order
+to receive any messages over an SMTP connection. The default configuration file
+contains a suitable default for this.
+
+ACLs can be provided in line, or in files, or looked up from databases. One ACL
+can call another in a subroutine-like manner. String expansion is used, and
+which ACL to run can be varied according to sender host or any other criterion
+that a string expansion can test.
+
+This is not the place to give a full specification of ACLs, but here is a
+typical example for checking RCPT commands, taken from the default
+configuration. The tests are performed in order.
+
+acl_check_rcpt:
+  # Accept if source is local SMTP (i.e. not over TCP/IP - undefined host)
+  accept  hosts = :
+
+  # Deny if the local part contains @ or % or /
+  deny    local_parts   = ^.*[@%/]
+
+  # Accept mail to postmaster in any local domain, regardless of the source,
+  # and without verifying the sender.
+  accept  domains       = +local_domains
+          local_parts   = postmaster
+
+  # Deny unless the sender address can be verified.
+  require verify        = sender
+
+  # Accept if the address is in a local domain, but only if the recipient can
+  # be verified. Otherwise deny. The "endpass" line is the border between
+  # passing on to the next ACL statement (if tests above it fail) or denying
+  # access (if tests below it fail).
+  accept  domains       = +local_domains
+          endpass
+          message       = unknown user
+          verify        = recipient
+
+  # We get here only for non-local domains. Accept if the message arrived over
+  # an authenticated connection, from any host. These messages are usually from
+  # MUAs, so recipient verification is omitted.
+  accept  authenticated = *
+
+  # Reaching the end of the ACL causes a "deny", but we might as well give
+  # an explicit message.
+  deny    message       = relay not permitted
+
+The following options have been abolished as a consequence of the introduction
+of ACLs:
+
+auth_hosts, auth_over_tls_hosts, headers_checks_fail, headers_check_syntax,
+headers_sender_verify, headers_sender_verify_errmsg, host_accept_relay,
+host_auth_accept_relay, host_reject_recipients, prohibition_message,
+rbl_domains, rbl_hosts, rbl_log_headers, rbl_log_rcpt_count,
+rbl_reject_recipients, rbl_warn_header, receiver_try_verify, receiver_verify,
+receiver_verify_addresses, receiver_verify_hosts, receiver_verify_senders,
+recipients_reject_except, recipients_reject_except_senders, relay_domains,
+relay_domains_include_local_mx, relay_match_host_or_sender,
+sender_address_relay, sender_address_relay_hosts, sender_reject,
+sender_reject_recipients, sender_try_verify, sender_verify,
+sender_verify_batch, sender_verify_hosts, sender_verify_fixup,
+sender_verify_hosts_callback, sender_verify_callback_domains,
+sender_verify_callback_timeout, sender_verify_max_retry_rate,
+sender_verify_reject, smtp_etrn_hosts, smtp_expn_hosts. smtp_verify, tls_hosts.
+
+The variable $prohibition_reason has been abolished.
+
+The host_reject option has been retained, but with its name changed to
+host_reject_connection, to emphasize that it causes a rejection at connection
+time. I've left it available just in case it is needed - but its use is not
+recommended in normal circumstances.
+
+
+Other Incoming SMTP Session Controls
+------------------------------------
+
+. The option smtp_accept_max_per_connection (default 1000) limits the number of
+  messages accepted over a single SMTP connection. This is a safety catch in
+  case some sender goes mad (incidents of this kind have been seen). After the
+  limit is reached, a 421 response is given to MAIL commands.
+
+. Some sites find it helpful to be able to limit the rate at which certain
+  hosts can send them messages, and the rate at which an individual message can
+  specify recipients. There are now options for controlling these two different
+  rates.
+
+  Rate limiting applies only to those hosts that match smtp_ratelimit_hosts,
+  whose value is a host list. When a host matches, one or both of the options
+  smtp_ratelimit_mail and smtp_ratelimit_rcpt may be set. They apply to the
+  rate of acceptance of MAIL and RCPT commands in a single SMTP session,
+  respectively.
+
+  The value of each option is a set of four comma-separated values:
+
+    1. A threshold, before which there is no rate limiting.
+    2. An initial time delay. Unlike other times in Exim, fractions are allowed
+       here.
+    3. A factor by which to increase the delay each time.
+    4. A maximum value for the delay.
+
+  For example, these settings have been used successfully at the site which
+  first suggested this feature, for controlling mail from their customers:
+
+    smtp_ratelimit_mail = 2, 0.5s, 1.05, 4m
+    smtp_ratelimit_rcpt = 4, 0.25s, 1.015, 4m
+
+. The default value for smtp_connect_backlog has been increased to 20.
+
+. The SMTP protocol specification requires the client to wait for a response
+  from the server at certain points in the dialogue. (Without PIPELINING these
+  are after every command; with PIPELINING they are fewer, but still exist.)
+  Some spamming sites send out a complete set of SMTP commands without waiting
+  for any response. Exim 4 protects against this by rejecting messages if the
+  client has sent further input when it should not have. The error response
+  "554 SMTP synchronization error" is sent, and the connection is dropped.
+
+  This check is controlled by smtp_enforce_sync, which is true by default.
+
+. helo_strict_syntax has been abolished. The default is now to enforce strict
+  domain syntax for HELO/EHLO arguments. You can use helo_accept_junk_hosts if
+  you want to avoid this.
+
+. There's a new option called helo_lookup_domains. If the domain given in a
+  HELO or EHLO command matches this list, a reverse lookup is done in order to
+  establish the host's true name. The default setting is
+
+    helo_lookup_domains = @ : @[]
+
+  That is, a lookup is forced if the client host gives the server's name or
+  [one of its IP addresses] in HELO or EHLO. (In Exim 3 this happened
+  automatically and was not configurable.)
+
+. The value of the global message_size_limit option is now expanded. For
+  locally submitted messages this happens at the start of message reception.
+  For messages from remote hosts, the expansion is done just after the host
+  connects, so that the value can depend on the host.
+
+
+Handling of Resent- Fields
+--------------------------
+
+RFC 2822 makes it clear that Resent- fields are purely informational. Exim used
+to make use of Resent-Reply-To: which does not actually exist, and it also used
+to use the last set of resent- fields for all the address fields it recognized.
+
+In Exim 4, resent- headers are dealt with as follows:
+
+. A Resent-From: header that just contains the login id as the address is
+  automatically rewritten in the same way as From: is (using qualify domain,
+  and user name from the passwd data).
+
+. If there's a rewrite rule for a header, it is also applied to resent- headers
+  of the same type. For example, a rule that rewrites From: headers also
+  rewrites Resent-From: headers.
+
+. For local messages, if Sender: is being removed on input, Resent-Sender: is
+  also removed.
+
+. If there are any resent- headers but no Resent-Date: or Resent-From: they are
+  added.
+
+. The logic for adding Sender: is now duplicated for Resent-Sender.
+
+. If there's no Resent-Message-Id: one is created, and it is the
+  Resent-Message-Id: which is included in the log line.
+
+
+Authentication
+--------------
+
+. The auth_hosts option has been abolished; this functionality is now
+  controlled by ACLs.
+
+. The auth_always_advertise option has been abolished because it depended on
+  auth_hosts and host_auth_accept_relay, both of which are no more. In its
+  place there is a new option called auth_advertise_hosts, whose default value
+  is *, meaning "advertise AUTH to all".
+
+. The value of server_setid is now used when logging failed authentication
+  attempts.
+
+. The -oMaa option allows trusted users to set the value of
+  $sender_host_authenticated (the authenticator name). This is normally used in
+  conjunction with -oMa.
+
+
+Encryption
+----------
+
+. Because tls_hosts is no more, tls_advertise_hosts is now the only means of
+  controlling the advertisement of STARTTLS (previously, tls_hosts overrode).
+
+. The global option tls_verify_ciphers has been abolished. There are now
+  facilities for checking which cipher is in use in ACLs.
+
+. There's a new option called tls_try_verify_hosts. Like tls_verify_hosts, this
+  causes the server to request a certificate from a client, and it verifies the
+  certificate that it receives. However, unlike tls_verify_hosts, Exim
+  continues with the SMTP connection (encrypted) if a client certificate is not
+  received, or if the certificate does not verify. This state can be detected
+  in an ACL, which makes it possible to implement policies such as "accept for
+  relay only if a verified certificate has been received but accept for local
+  delivery if encrypted, even without a verified certificate".
+
+  A match in tls_verify_hosts overrides tls_try_verify_hosts.
+
+
+The Daemon
+----------
+
+. local_interfaces can now specify a port number with each address, thus
+  allowing a single Exim daemon to listen on multiple ports. The format of each
+  address is either [aaaa]:ppp or aaaa.ppp where aaaa is an IP address and ppp
+  is a port number. For example:
+
+    local_interfaces = 192.168.3.4.25 : 192.168.3.4.26
+
+  If an address is listed without a port, the setting of daemon_smtp_port, or
+  the value of the -oX option, is the default.
+
+. The -oX option can now override local_interfaces. That is, it can supply IP
+  addresses as well as just a port. It is interpreted in this way if its value
+  contains any of the characters . : or []. For example:
+
+  exim -bd -oX 10.9.8.7:10.11.12.13.2525
+
+  The format of the string is identical to the format recognized by the
+  local_interfaces option.
+
+. The way the daemon wrote PID files was overly complicated and messy. It no
+  longer tries to be clever. A PID file is written if, and only if, -bd is used
+  and -oX is _not_ used. In other words, only if the daemon is started with its
+  standard options. There is only one PID file. If pid_file_path is unset, it
+  is exim-daemon.pid in Exim's spool directory. Otherwise the value of
+  pid_file_path is used. For backwards compatibility, "%s" in this value is
+  replaced by an empty string.
+
+
+Logging
+-------
+
+The log_level option and all the various independent logging control options
+have been abolished. In their place there is a single option called
+log_selector. It takes a string argument composed of names preceded by + or -
+characters. These turn on or off the logging of different things. For example:
+
+  log_selector = +arguments -retry_defer
+
+The optional logging items (defaults marked *) are:
+
+  address_rewrite             address rewriting
+  all_parents                 all parents in => lines
+  arguments                   exim arguments
+ *connection_reject           connection rejections
+ *delay_delivery              immediate delivery delayed (message queued)
+  delivery_size               add S=nnn to delivery lines
+ *dnslist_defer               defers of DNS list (aka RBL) lookups
+  incoming_interface          incoming interface on <= lines
+  incoming_port               incoming port on <= lines
+ *lost_incoming_connection    as it says (includes timeouts)
+ *queue_run                   start and end queue runs
+  received_sender             sender on <= lines
+  received_recipients         recipients on <= lines
+ *retry_defer                 "retry time not reached"
+  sender_on_delivery          add sender to => lines
+ *size_reject                 rejection because too big
+ *skip_delivery               "message is frozen"
+  smtp_confirmation           SMTP confirmation on <= lines
+  smtp_connection             SMTP connections
+  smtp_protocol_error         SMTP protocol errors
+  smtp_syntax_error           SMTP syntax errors
+  subject                     contents of Subject: on <= lines
+ *tls_cipher                  TLS cipher on <= lines
+  tls_peerdn                  TLS peer DN on <= lines
+
+  all                         all of the above
+
+"retry time not reached" is always omitted from individual message logs after
+the first delivery attempt.
+
+The log line "error message sent to" has been abolished, because the R= item on
+the incoming message line gives the relationship between the original message
+and the bounce.
+
+The logging options that have been abolished are: log_all_parents,
+log_arguments, log_incoming_port, log_interface, log_ip_options,
+log_level, log_queue_run_level, log_received_sender, log_received_recipients,
+log_rewrites, log_sender_on_delivery, log_smtp_confirmation,
+log_smtp_connections, log_smtp_syntax_errors, log_subject, tls_log_cipher,
+tls_log_peerdn.
+
+
+Debugging
+---------
+
+The debug_level option has been removed. The -dm option has been removed. The
+-df option has also be removed, along with its related build-time option
+STDERR_FILE. (To debug inetd usage, an auxiliary script should be used.)
+
+The -d option has been reworked. It no longer takes a debug level number
+argument, but instead takes a list of debugging names, each preceded by + or -
+to turn on or off individual sets of debugging messages.
+
+. The -v option now shows just the SMTP dialog and any log lines.
+
+. -d with no argument gives a lot of standard debugging data. This is in effect
+  the equivalent of the old -d9, the thing you ask people to set for an initial
+  debugging test.
+
+. -d+x      adds debugging option x to the default set
+  -d-x      removes debugging option x from the default set
+  -d-all+x  leaves only debugging option x
+
+The available debugging names are:
+
+  acl            ACL interpretation
+  auth           authenticators
+  deliver        general delivery logic
+  dns            DNS lookups (see also resolver)
+  dnsbl          DNS black list (aka RBL) code
+  exec           arguments for execv() calls
+  filter         filter handling
+  hints_lookup   hints data lookups
+  host_lookup    all types of name->IP address handling
+  ident          ident lookup
+  interface      lists of local interfaces
+  lists          matching things in lists
+  load           system load checks
+  lookup         general lookup code and all lookups
+  memory         memory handling (replaces the old -dm)
+  process_info   setting info for the process log
+  queue_run      queue runs
+  receive        general message reception logic
+  resolver       turn on the DNS resolver's debugging output; goes to stdout
+  retry          retry handling
+  rewrite        rewriting
+  route          address routing
+  tls            TLS logic
+  transport      transports
+  uid            changes of uid/gid and looking up uid/gid
+  verify         address verification logic
+
+  all            all of the above, and also -v
+
+The default (-d with no argument) includes all of the above, plus -v, with the
+exception of filter, interface, load, memory, and resolver. Some debugging
+output always happens unconditionally whenever any debugging is selected. This
+includes some initial output and every log line.
+
+-d without any value was previously allowed for non-admin users because it used
+to be synonymous with -v. In Exim 4, non-admin users may use -v, but not -d.
+
+If the debug_print option is set in any driver, it produces output whenever any
+debugging is selected, or if -v is used.
+
+
+Local Scan Function
+-------------------
+
+For customized message scanning, you can now supply a C function that is linked
+into the Exim binary. The function is called local_scan(), and it is called
+when Exim has received a message, but has not yet sent a final
+acknowledgement to the sender. This applies to all messages, whether local or
+remote, SMTP or not.
+
+From within your function you can inspect the message, change the recipients,
+add or remove headers, and tell Exim whether to accept or reject the message.
+
+The manual contains the specification of the API for this function.
+
+
+String Expansion
+----------------
+
+. The lookup feature that allowed for subkeys using the syntax
+
+    ${lookup {key:subkey} type {data...
+
+  has been abolished (a) because the effect can be achieved using ${extract,
+  and (b) because in non-lsearch lookups, a colon can be a valid character in a
+  key.
+
+. When a string key is used in a ${extract expansion item, it is now handled
+  case-insensitively.
+
+. A new expansion variable called $tod_epoch gives the time as a single decimal
+  number representing the number of seconds from the start of the Unix epoch.
+
+. There's a new expansion operator that can turn numbers into base 62, for
+  example, ${base62:$tod_epoch}.
+
+. ${extract{number} now recognizes a negative number as a request to count
+  fields from the right.
+
+. There's a new expansion feature for reading files:
+
+    ${readfile{/some/file}{eolstring}}
+
+  The contents of the file replace the item. If {eolstring} is present (it's
+  optional) any newlines in the file are replaced by that string.
+
+. There's a new expansion feature for running commands:
+
+    ${run{command args}{yes}{no}}
+
+  Like all the other conditional items, the {yes} and {no} strings are
+  optional. Omitting both is equivalent to {$value}. The standard output of the
+  command is put into $value if the command succeeds (returns a zero code). The
+  value of the code itself is put into $runrc, and this remains set afterwards,
+  so in a filter file you can do things like
+
+    if "${run{x y z}{}}$runrc" is 1 then ...
+    elsif $runrc is 2 then ...
+
+  As in other command executions from Exim, a shell is not used by default.
+  If you want a shell, you must explicitly code it.
+
+. The redirect router has options for forbidding ${readfile and ${run in
+  filters.
+
+. A feature is provided to suppress expansion of part of a string. Any
+  characters between two occurrences of \N are copied to the output string
+  verbatim. This is particularly useful for protecting regular expressions from
+  unwanted expansion effects. For example:
+
+    queue_smtp_domains = ! \N^ten-\d+\.testing\.com$\N
+
+  Without \N the \ and $ characters in the regex would have to be escaped.
+
+. Radius authentication is supported in a similar way to PAM. You must set
+  RADIUS_CONFIG_FILE in Local/Makefile to specify the location of the Radius
+  client configuration file. Then you can use expansions such as
+
+    server_condition = ${if radius{arguments}{yes}{no}}
+
+. User authentication can now also be done by attempting to bind to an LDAP
+  server. The syntax is again similar to PAM and Radius.
+
+    server_condition = ${if ldapauth{ldap query}{yes}{no}}
+
+  A user and password are required to be supplied with the query. No actual
+  data is looked up; Exim just does a bind to the LDAP server and sets the
+  condition according to the result. Here's an example of an SMTP
+  authenticator:
+
+    login:
+      driver = plaintext
+      public_name = LOGIN
+      server_prompts = "Username:: : Password::"
+      server_condition = ${if ldapauth \
+        {user="uid=${quote_ldap:$1},ou=people,o=example.org" pass="$2" \
+        ldap://ldap.example.org/}{yes}{no}}
+      server_set_id = uid=$1,ou=people,o=example.org
+
+
+
+Security
+--------
+
+Exim 3 could be run in a variety of ways as far as security was concerned. This
+has all been simplified in Exim 4. Exim dropped the use of seteuid() in
+most places. But recent (2020-10/2021-04) vulnerabilities forced us to
+re-introduce seteuid() for opening the database files (hint files) as secure as
+possible. For future (>= 4.95) versions we work on a solution that
+does not need the seteuid call.
+
+. A UID and GID are required to be specified when Exim is compiled. They can be
+  now specified by name as well as by number, so the relevant options are now
+  called EXIM_USER and EXIM_GROUP. If you really feel you have to run Exim as
+  root, you can specify root here, but it is not recommended.
+
+. The "security" option has been abolished. Exim always releases its root
+  privilege when it can. In a conventional configuration, that means when it is
+  receiving a message, when it is delivering a message, when it is running a
+  queryprogram router, and when it is obeying users' filter files (and system
+  filters if it has been given a user for that purpose).
+
+. One important change is that Exim 4 runs as root while routing addresses for
+  delivery. Exim 3 used seteuid() to give up privilege temporarily while
+  routing. Apart from the unliked use of seteuid(), this sometimes gave rise to
+  permissions problems on configuration files.
+
+. However, Exim still runs as the Exim user while receiving messages, and
+  therefore while using the routing logic for verifying at SMTP time.
+
+. There is a new option called deliver_drop_privilege. If this is set, Exim
+  gives up its privilege right at the start of a delivery process, and runs the
+  entire delivery as the Exim user. This is the same action that used to be
+  requested by setting security=unprivileged.
+
+
+Hints Databases
+---------------
+
+. A single "misc" hints database is now used for ETRN and host serialization.
+  There have been appropriate consequential changes to the utilities for
+  managing the hints.
+
+. The exim_tidydb -f option has been abolished. A full tidy is now always done
+  (it hasn't proved to be very expensive).
+
+
+The run time Configuration File
+------------------------------
+
+. The format of the configuration file has changed. Instead of using "end" to
+  terminate sections, it now uses "begin <name>" to start sections. This means
+  that the sections, apart from the first, may appear in any order.
+
+. You can now include other files inside Exim run time configuration files, by
+  using this syntax:
+
+  .include <file name>
+
+. Quotes round the file name are optional. Includes may be nested to any depth,
+  but remember that Exim reads its configuration file often. The processing of
+  .include happens early, at a physical line level, so, like comment lines, it
+  can be used in the middle of an options setting, for example:
+
+  hosts_lookup = a.b.c \
+                 .include /some/file
+
+  Include processing happens _before_ macro processing. Its effect is simply to
+  process the lines of the file as if they occurred inline where the .include
+  appears.
+
+. A macro at the start of a configuration line can now turn the line into an
+  empty line or a comment line. This applies to _logical_ input lines, that is,
+  after any concatenations have been done.
+
+
+Format of spool files
+---------------------
+
+. -local_scan is used in spool files to record the value of $local_scan_data,
+  the string returned from the locally-provided local_scan() function.
+
+
+Renamed Options
+---------------
+
+Some options have been renamed, to make their function clearer, or for
+consistency.
+
+. receiver_unqualified_hosts has been renamed as recipient_unqualified_hosts.
+  I'm going to use "recipient" everywhere in future.
+
+. helo_verify has become helo_verify_hosts.
+
+. remote_sort has become remote_sort_domains.
+
+. In the appendfile and pipe transports, "prefix" and "suffix" have become
+  "message_prefix" and "message_suffix". In the generic router options,
+  "prefix" and "suffix" have become "local_part_prefix" and "local_part_suffix".
+
+
+Miscellaneous
+-------------
+
+. ETRN serialization now uses a double fork, so that an Exim process (detached
+  from the original input process) can wait for the command to finish. This
+  means that it works whatever command ETRN causes to run. (Previously it
+  worked only if ETRN ran "exim -Rxxx".)
+
+. For incoming messages, the server's port number is preserved, and is
+  available in $interface_port. The privileged option -oMi can be used to
+  set this value.
+
+. The -Mmd option (to mark addresses delivered) now operates in a
+  case-sensitive manner.
+
+. Checks for duplicate deliveries are now case-sensitive in the local part.
+
+. The number of situations where Exim panics has been reduced. For example,
+  expansion failures for the "domains" or "local_parts" options in a router now
+  cause deferral instead of a panic.
+
+. EXPN no longer attempts to distinguish local and remote addresses (but you
+  can cause it to be rejected for certain arguments in the ACL).
+
+. accept_timeout has been renamed as receive_timeout, to match
+  smtp_receive_timeout.
+
+. The ability to check an ident value as part of an item in a host list has
+  been removed.
+
+. The reject log shows a message's headers only if the rejection happens after
+  the SMTP DATA command (because they aren't available for earlier checks). The
+  sender, and up to five recipients are listed in Envelope-from: and
+  Envelope-to: header lines. After the headers, a line of separator characters
+  is output. Separators are no longer used for other reject log entries.
+
+. Because header checks are now done as part of ACLs, they now apply only to
+  SMTP input.
+
+. The port number on SMTP connections is now logged in the format [aaaa]:ppp
+  where aaaa is an IP address and ppp is a port, instead of in the format
+  [aaaa.ppp] because the former format causes some software to complain about
+  bad IP addresses.
+
+. The -oMa and -oMi options can now use the [aaaa]:ppp notation to set a port
+  number, but they still also recognize the aaaa.ppp notation.
+
+. The build-time option HAVE_AUTH is abolished. Exim automatically includes
+  authentication code if any authenticators are configured.
+
+. The nobody_user and nobody_group options have been abolished.
+
+. The $message_precedence variable has been abolished. The value is now
+  available as $h_precedence:.
+
+. There's a new utility script called exim_checkaccess which packages up a call
+  to Exim with the -bh option, for access control checking. The syntax is
+
+    exim_checkaccess <IP address> <email address> [exim options]
+
+  It runs "exim -bh <IP address>", does the SMTP dialogue, tests the result and
+  outputs either "accepted" or "Rejected" and the SMTP response to the RCPT TO
+  command. The sender is <> by default, but can be changed by the use of the
+  -f option.
+
+. The default state of Exim is now to forbid domain literals. For this reason,
+  the option that changes this has been renamed as allow_domain_literals.
+
+. The dns_check_names boolean option has been abolished. Checking is now turned
+  off by unsetting dns_check_names_pattern.
+
+. The errors_address and freeze_tell_mailmaster options have been abolished. In
+  their place there is a new option called freeze_tell, which can be set to a
+  list of addresses. A message is sent to these addresses whenever a message is
+  frozen - with the exception of failed bounce messages (this is not changed).
+
+. The message_size_limit_count_recipients option has been abolished on the
+  grounds that it was a failed experiment.
+
+. The very-special-purpose X rewrite flag has been abolished. The facility it
+  provided can now be done using the features of ACLs.
+
+. The timestamps_utc option has been abolished. The facility is now provided by
+  setting timezone = utc.
+
+. The value of remote_max_parallel now defaults to 2.
+
+. ignore_errmsg_errors has been abolished. The effect can be achieved by
+  setting ignore_bounce_errors_after = 0s. This option has been renamed from
+  ignore_errmsg_errors_after to make its function clearer. The default value
+  for ignore_bounce_errors_after is now 10w (10 weeks - i.e. likely to be
+  longer than any other timeouts, thereby disabling the facility).
+
+. The default for message_size_limit is now 50M as a guard against DoS attacks.
+
+. The -qi option does only initial (first time) deliveries. This can be helpful
+  if you are injecting message onto the queue using -odq and want a queue
+  runner just to process new messages. You can also use -qqi if you want.
+
+. Rewriting and retry patterns are now anything that can be single address list
+  items. They are processed by the same code, and are therefore expanded before
+  the matching takes place. Regular expressions must be suitably quoted. These
+  patterns may now be enclosed in double quotes so that white space may be
+  included. Normal quote processing applies.
+
+. Some scripts were built in the util directory, which was a mistake, because
+  they might be different for different platforms. Everything that is built is
+  now built in the build directory. The util directory just contains a couple
+  of scripts that are not modified at build time.
+
+. The installation script now installs the Exim binary as exim-v.vv-bb (where
+  v.vv is the version number and bb is the build number), and points a symbolic
+  link called "exim" to this binary. It does this in an atomic way so that
+  there is no time when "exim" is non-existent. The script is clever enough to
+  cope with an existing non-symbolic-link binary, converting it to the new
+  scheme automatically (and atomically).
+
+. When installing utilities, Exim now uses cp instead of mv to add .O to the
+  old ones, in order to preserve the permissions.
+
+. If the installation script is installing the default configuration, and
+  /etc/aliases does not exist, the script installs a default version. This does
+  not actually contain any aliases, but it does contain comments about ones
+  that should be created. A warning is output to the user.
+
+. A delay warning message is not sent if all the addresses in a message get a
+  "retry time not reached" error. Exim waits until a delivery is actually
+  attempted, so as to be able to give a more informative message.
+
+. The existence of the three options deliver_load_max, queue_only_load, and
+  deliver_queue_load_max was confusing, because their function overlapped. The
+  first of them has been abolished. We are left with
+
+    queue_only_load         no immediate delivery if load is high when
+                            message arrives
+    deliver_queue_load_max  no queued delivery if load is too high
+
+. The ability to edit message bodies (-Meb and the Eximon menu item) has been
+  removed, on the grounds that it is bad practice to do this.
+
+. Eximstats is now Steve Campbell's patched version, which displays sizes in K
+  and M and G, and can optionally generate HTML.
+
+. If bounce_sender_authentication is set to an email address, this address is
+  used in an AUTH option of the MAIL command when sending bounce messages, if
+  authentication is being used. For example, if you set
+
+    bounce_sender_authentication = mailer-daemon@your.domain
+
+  a bounce message will be sent over an authenticated connection using
+
+    MAIL FROM:<> AUTH=mailer-daemon@your.domain
+
+. untrusted_set_sender has changed from a boolean to an address pattern. It
+  permits untrusted users to set sender addresses that match the pattern. Like
+  all address patterns, it is expanded. The identity of the user is in
+  $sender_ident, so you can, for example, restrict users to setting senders
+  that start with their login ids by setting
+
+    untrusted_set_sender = ^$sender_ident-
+
+  The effect of the previous boolean can be achieved by setting the value to *.
+  This option applies to all forms of local input.
+
+. The always_bcc option has been abolished. If an incoming message has no To:
+  or Cc: headers, Exim now always adds an empty Bcc: line. This makes the
+  message valid for RFC 822 (sic). In time, this can be removed, because RFC
+  2822 does not require there to be a recipient header.
+
+. ACTION_OUTPUT=no is now the default in the Exim monitor.
+
+. dns_ipv4_lookup has changed from a boolean into a domain list, and it now
+  applies only to those domains. Setting this option does not stop Exim from
+  making IPv6 calls: if an MX lookup returns AAAA records, Exim will use them.
+  What it does is to stop Exim looking for AAAA records explicitly.
+
+. The -G option is ignored (another Sendmail thing).
+
+. If no_bounce_return_message is set, the original message is not included in
+  bounce messages. If you want to include additional information in the bounce
+  message itself, you can use the existing errmsg_file and errmsg_text
+  facilities.
+
+. -bdf runs the daemon in the foreground (i.e. not detached from the terminal),
+  even when no debugging is requested.
+
+. Options for changing Exim's behaviour on receiving IPv4 options have been
+  abolished. Exim now always refuses calls that set these options, and logs the
+  incident. The abolished options are kill_ip_options, log_ip_options, and
+  refuse_ip_options.
+
+. The pattern for each errors_copy entry is now matched as an item in an
+  address list.
+
+. A number of options and variables that used the word "errmsg" have been
+  changed to use "bounce" instead, because it seems that "bounce message" is
+  now a reasonably well-understood term. I used it in the book and am now using
+  it in the manual; it's a lot less cumbersome than "delivery error
+  notification message". The changes are:
+
+  $errmsg_recipient          => $bounce_recipient
+  errmsg_file                => bounce_message_file
+  errmsg_text                => bounce_message_text
+  ignore_errmsg_errors_after => ignore_bounce_errors_after
+
+  For consistency, warnmsg_file has been changed to warn_message_file. However,
+  the two variables $warnmsg_delay and $warnmsg_recipients are unchanged.
+
+  The hide_child_in_errmsg option has not changed, because it applies to both
+  bounce and delay warning messages.
+
+. smtp_accept_max_per_host is now an expanded string, so it can be varied on
+  a per-host basis. However, because this test happens in the daemon before it
+  forks, the expansion should be kept as simple as possible (e.g. just inline
+  tests of $sender_host_address).
+
+. The retry rules can now recognize the error "auth_failed", which happens when
+  authentication is required, but cannot be done.
+
+. There's a new option called local_sender_retain which can be set if
+  no_local_from_check is set. It causes Sender: headers to be retained in
+  locally-submitted messages.
+
+. The -dropcr command line option now turns CRLF into LF, and leaves isolated
+  CRs alone. Previously it simply dropped _all_ CR characters. There is now
+  also a drop_cr main option which, if turned on, assumes -dropcr for all
+  non-SMTP input.
+
+
+Removal of Obsolete Things
+--------------------------
+
+. The obsolete values "fail_soft" and "fail_hard" for the "self" option have
+  been removed.
+
+. The obsolete "log" command has been removed from the filter language.
+
+. "service" was an obsolete synonym for "port" when specifying IP port numbers.
+  It has been removed.
+
+. The obsolete option collapse_source_routes has been removed. It has done
+  nothing since release 3.10.
+
+. The obsolete from_hack option in appendfile and pipe transports has been
+  removed.
+
+. The obsolete ipv4_address_lookup has been abolished (dns_ipv4_lookup has been
+  a synonym for some time, but it's changed - see above).
+
+. The obsolete generic transport options add_headers and remove_headers have
+  been abolished. The new names, headers_add and headers_remove, have been
+  available for some time.
+
+Philip Hazel
+February 2002
diff --git a/doc/GnuTLS-FAQ.txt b/doc/GnuTLS-FAQ.txt
new file mode 100644
index 0000000..ab4e5aa
--- /dev/null
+++ b/doc/GnuTLS-FAQ.txt
@@ -0,0 +1,414 @@
+Using Exim 4.80+ with GnuTLS
+============================
+
+(1) I'm having problems building with GnuTLS 1, why?
+(2) What changed?  Why?
+(3) I'm seeing:
+    "(gnutls_handshake): A TLS packet with unexpected length was received"
+    Why?
+(4) What's the deal with MD5?  (And SHA-1?)
+(5) What happened to gnutls_require_kx / gnutls_require_mac /
+    gnutls_require_protocols?
+(6) What's the deal with tls_dh_max_bits?  What's DH?
+(7) What's a Priority String?
+(8) How do I use tls_require_ciphers?
+(9) How do I test STARTTLS support?
+
+
+
+(1): I'm having problems building with GnuTLS 1, why?
+-----------------------------------------------------
+
+GnuTLS's library interface has changed and Exim uses the more current
+interface.  Since GnuTLS is security critical code, you should probably update
+to a supported release.
+
+If updating GnuTLS is not an option, then build Exim against OpenSSL instead.
+
+If neither is an option, then you might build Exim with the rule
+"SUPPORT_TLS=yes" commented out in "Local/Makefile", so that your Exim build
+no longer has TLS support.
+
+If you need to keep TLS support, and you can't use OpenSSL, then you'll have
+to update the GnuTLS you have installed.  Sorry.
+
+We've tested the build of Exim back as far as GnuTLS 2.8.x; most development
+work is done with 2.12 and tested on 2.10 and 3.x.
+
+If you have to pick a version to upgrade to, use GnuTLS 3.x if available.  The
+GnuTLS developers took advantage of the version bump to add an error code
+return value which makes debugging some problems a lot easier.
+
+
+
+(2): What changed?  Why?
+------------------------
+
+The GnuTLS provider integration in Exim was overhauled, rewritten but with
+some copy/paste, because building Exim against more current releases of GnuTLS
+was issuing deprecation warnings from the compiler.
+
+When a library provider marks up the include files so that some function calls
+will cause the compiler/linker to emit deprecation warnings, it's time to pay
+serious attention.  A future release might not work at all.  Using the new
+APIs may mean that Exim will *stop* working with older releases of GnuTLS.
+The GnuTLS support in Exim was overhauled in Exim 4.80.  In prior releases,
+Exim hard-coded a lot of algorithms and constrained what could happen.  In
+Exim 4.79, we added to the hard-coded list just enough to let TLSv1.1 and
+TLSv1.2 be negotiated, but not actually support the mandatory algorithms of
+those protocol versions.  When Exim's GnuTLS integration was originally
+written, there was no other choice than to make Exim responsible for a lot of
+this.  In the meantime, GnuTLS has improved.
+
+With the rewrite, we started using the current API and leaving a lot more
+responsibility for TLS decisions to the library.
+
+The GnuTLS developers added "priority strings" (see Q7), which provide an
+interface exposed to the configuration file for a lot of the tuning.
+
+The GnuTLS policy is to no longer support MD5 in certificates.  Exim had
+previously been immune to this policy, but no longer.  See Q4.
+
+
+
+(3): I'm seeing "A TLS packet with unexpected length was received".  Why?
+-------------------------------------------------------------------------
+
+The most likely reason is that the client dropped the connection during
+handshake, because their library disliked some aspect of the negotiation.
+
+In GnuTLS 2, an EOF on the connection is reported with an error code for
+packets being too large, and the above is the string returned by the library
+for that error code.  In GnuTLS 3, there's a specific error code for EOF and
+the diagnostic will be less confusing.
+
+Most likely cause is an MD5 hash used in a certificate.  See Q4 below.
+Alternatively, the client dislikes the size of the Diffie-Hellman prime
+offered by the server; if lowering the value of the "tls_dh_max_bits" Exim
+option fixes the problem, this was the cause.  See Q6.
+
+
+
+(4): What's the deal with MD5?  (And SHA-1?)
+--------------------------------------------
+
+MD5 is a hash algorithm.  Hash algorithms are used to reduce a lot of data
+down to a fairly short value, which is supposed to be extremely hard to
+manipulate to get a value of someone's choosing.  Signatures, used to attest
+to identity or integrity, rely upon this manipulation being effectively
+impossible, because the signature is the result of math upon the hash result.
+Without hash algorithms, signatures would be longer than the text being
+signed.
+
+MD5 was once very popular.  It still is far too popular.  Real world attacks
+have been proven possible against MD5.  Including an attack against PKI
+(Public Key Infrastructure) certificates used for SSL/TLS.  In that attack,
+the attackers got a certificate for one identity but were able to then publish
+a certificate with the same signature but a different identity.  This
+undermines the whole purpose of having certificates.
+
+So GnuTLS stopped trusting any certificate with an MD5-based hash used in it.
+The world has been hurriedly moving away from MD5 in certificates for a while.
+If you still have such a certificate, you should move too.
+
+If you paid someone for your certificate, they should be willing to reissue
+the certificate with a different algorithm, for no extra money.  If they try
+to charge money to replace their defective product, buy from someone else
+instead.  Part of the reason for paying money on a recurring basis is to cover
+the ongoing costs of proving a trust relationship, such as providing
+revocation protocols.  This is just another of those ongoing costs you have
+already paid for.
+
+The same has happened to SHA-1: there are real-world collision attacks against
+SHA-1, so SHA-1 is mostly defunct in certificates.  GnuTLS no longer supports
+its use in TLS certificates.
+
+
+
+(5): ... gnutls_require_kx / gnutls_require_mac / gnutls_require_protocols?
+---------------------------------------------------------------------------
+
+These Exim options were used to provide fine-grained control over the TLS
+negotiation performed by GnuTLS.  They required explicit protocol knowledge
+from Exim, which vastly limited what GnuTLS could do and involved the Exim
+maintainers in decisions which aren't part of their professional areas of
+expertise.  The need for Exim to be able to do this went away when GnuTLS
+introduced Priority Strings (see Q7).
+
+If you were using these options before, then you're already an expert user and
+should be able to easily craft a priority string to accomplish your goals.
+Set the Exim "tls_require_ciphers" value accordingly.  There is a main section
+option of this name, used for Exim receiving inbound connections, and an SMTP
+driver transport option of this name, used for Exim establishing outbound
+connections.
+
+
+
+(6): What's the deal with tls_dh_max_bits?  What's DH?
+------------------------------------------------------
+
+You can avoid all of the tls_dh_max_bits issues if you leave "tls_dhparam"
+unset, so that you get one of the standard built-in primes used for DH.
+
+
+DH, Diffie-Hellman (or Diffie-Hellman-Merkle, or something naming Williamson)
+is the common name for a way for two parties to a communication stream to
+exchange some private random data so that both end up with a shared secret
+which no eavesdropper can get.  It does not provide for proof of the identity
+of either party, so on its own is subject to man-in-the-middle attacks, but is
+often combined with systems which do provide such proof, improving them by
+separating the session key (the shared secret) from the long-term identity,
+and so protecting past communications from a break of the long-term identity.
+
+To do this, the server sends to the client a very large prime number; this is
+in the clear, an attacker can see it.  This is not a problem; it's so not a
+problem, that there are standard named primes which applications can use, and
+which Exim now supports.
+
+The size of the prime number affects how difficult it is to break apart the
+shared secret and decrypt the data.  As time passes, the size required to
+provide protection against an adversary climbs: computers get more powerful,
+mathematical advances are made, and so on.
+
+Estimates of the size needed are published as recommendations by various
+groups; a good summary of sizes currently recommended, for various
+cryptographic primitives, is available at:
+
+  http://www.keylength.com/en/3/
+
+The GnuTLS folks think the ECRYPT II advice is good.  They know far more of
+such matters than the Exim folks, we just say "er, what they said".
+
+One of the new pieces of the GnuTLS API is a means for an application to ask
+it for guidance and advice on how large some numbers should be.  This is not
+entirely internal to GnuTLS, since generating the numbers is slow, an
+application might want to use a standard prime, etc.  So, in an attempt to get
+away from being involved in cryptographic policy, and to get rid of a
+hard-coded "1024" in Exim's source-code, we switched to asking GnuTLS how many
+bits should be in the prime number generated for use for Diffie-Hellman.  We
+then give this number straight back to GnuTLS when generating a DH prime.
+We can ask for various sizes, and did not expose this to the administrator but
+instead just asked for "NORMAL" protection.
+Literally:
+
+ dh_bits = gnutls_sec_param_to_pk_bits(GNUTLS_PK_DH, GNUTLS_SEC_PARAM_NORMAL);
+
+This API is only available as of GnuTLS 2.12.  Prior to that release, we stuck
+with the old value, for compatibility, so "1024" is still hard-coded.
+Reviewing the page above, you'll see that this is described as "Short-term
+protection against medium organizations, medium-term protection against small
+organizations."
+
+So if you are using an old release of GnuTLS, you can either add to
+Local/Makefile a different value of "EXIM_SERVER_DH_BITS_PRE2_12" or accept
+that your protection might not be adequate to your needs.  We advise updating
+to a more current GnuTLS release and rebuilding Exim against that.
+
+Unfortunately, some TLS libraries have the client side bound how large a DH
+prime they will accept from the server.  The larger the number, the more
+computation required to work with it and the slower that things get.  So they
+pick what they believe to be reasonable upper bounds, and then typically
+forget about it for several years.
+
+Worse, in TLS the DH negotiation happens after a ciphersuite has been chosen,
+so if the client dislikes the value then a different ciphersuite avoiding DH
+can not be negotiated!  The client typically drops the connection, resulting
+in errors to the user and errors in the Exim logs.  With GnuTLS 3, you'll see
+the EOF (End-Of-File) error message in Exim's logs, reported as being part of
+"gnutls_handshake", but with GnuTLS 2 you'll see a log message about a packet
+with an unexpected size.  Unless the client software is written intelligently
+enough to be able to adapt and reconnect forbidding DH, the client will never
+be able to negotiate TLS.
+
+This time around, we discovered that the NSS library used by various Mozilla
+products, Chrome, etc, and most particularly by the Thunderbird mail client,
+has the lowest cap.  In fact, prior to recent updates, their upper limit was
+lower than the value returned by GnuTLS for "NORMAL".  The most recent NSS
+library release raises this, but the most recent Thunderbird release still has
+the old limit.
+
+So Exim had to get involved in cryptography policy decisions again.  We added
+the "tls_dh_max_bits" global option, to set a number used in both OpenSSL and
+GnuTLS bindings for Exim.  In GnuTLS, it clamps the value returned by
+gnutls_sec_param_to_pk_bits(), so that if the returned value is larger than
+tls_dh_max_bits then tls_dh_max_bits would be used instead.
+
+Our policy decision was to default the value of tls_dh_max_bits to the maximum
+supported in the most recent Thunderbird release, and to make this an
+administrator-available option so that administrators can choose to trade off
+security versus compatibility by raising it.
+
+A future release of Exim may even let the administrator tell GnuTLS to ask for
+more or less than "NORMAL".
+
+To add to the fun, the size of the prime returned by GnuTLS when we call
+gnutls_dh_params_generate2() is not limited to be the requested size.  GnuTLS
+has a tendency to overshoot.  2237 bit primes are common when 2236 is
+requested, and higher still have been observed.  Further, there is no API to
+ask how large the prime bundled up inside the parameter is; the most we can do
+is ask how large the DH prime used in an active TLS session is.  Since we're
+not able to use GnuTLS API calls (and exporting to PKCS3 and then calling
+OpenSSL routines would be undiplomatic, plus add a library dependency), we're
+left with no way to actually know the size of the freshly generated DH prime.
+
+Thus we check if the the value returned is at least 10 more than the minimum
+we'll accept as a client (EXIM_CLIENT_DH_MIN_BITS, see below, defaults to
+1024) and if it is, we subtract 10.  Then we reluctantly deploy a strategy
+called "hope".  This is not guaranteed to be successful; in the first code
+pass on this logic, we subtracted 3, asked for 2233 bits and got 2240 in the
+first test.
+
+If you see Thunderbird clients still failing, then as a user who can see into
+Exim's spool directory, run:
+
+$ openssl dhparam -noout -text -in /path/to/spool/gnutls-params-2236 | head
+
+Ideally, the first line will read "PKCS#3 DH Parameters: (2236 bit)".  If the
+count is more than 2236, then remove the file and let Exim regenerate it, or
+generate one yourself and move it into place.  Ideally use "openssl dhparam"
+to generate it, and then wait a very long time; at least this way, the size
+will be correct.
+
+The use of "hope" as a strategy was felt to be unacceptable as a default, so
+late in the RC series for 4.80, the whole issue was side-stepped.  The primes
+used for DH are publicly revealed; moreover, there are selection criteria for
+what makes a "good" DH prime.  As it happens, there are *standard* primes
+which can be used, and are specified to be used for certain protocols.  So
+these primes were built into Exim, and by default exim now uses a 2048 bit
+prime from section 2.2 of RFC 5114.
+
+
+A TLS client does not get to choose the DH prime used, but can choose a
+minimum acceptable value.  For Exim, this is a compile-time constant called
+"EXIM_CLIENT_DH_MIN_BITS" of 1024, which can be overruled in "Local/Makefile".
+
+
+
+(7): What's a Priority String?
+------------------------------
+
+A priority string is a way for a user of GnuTLS to tell GnuTLS how it should
+make decisions about what to do in TLS; it includes which algorithms to make
+available for various roles, what compatibility trade-offs to make, which
+features to enable or disable.
+
+It is exposed to the Mail Administrator in Exim's configuration file as the
+"tls_require_ciphers" option, which exists as a main section option for use in
+Exim as a server, accepting connections, and as an option on Transports using
+the SMTP driver, for use in Exim as a client.  The main section option is
+*not* the default for the transport option, they are entirely independent.
+For both, the default value used by Exim is the string "NORMAL".  (This is not
+the same NORMAL as for DH prime bit size selection in Q6, but a different
+NORMAL.)  See Q8.
+
+The current documentation, for the most recent release of GnuTLS, is available
+online at:
+
+  http://www.gnutls.org/manual/html_node/Priority-Strings.html
+
+Beware that if you are not using the most recent GnuTLS release then this
+documentation will be wrong for you!  You should find the "info" documentation
+which came with GnuTLS to review the available options.  It's under "The TLS
+Handshake Protocol".
+
+$ pinfo --node="Priority Strings" gnutls
+
+(This author is unable to persuade the "info" command-line tool to jump
+straight to the required node, but "pinfo" works.)
+
+To trade off some security for more compatibility, you might set a value of
+"NORMAL:%COMPAT".  See the documentation for more, including lowering security
+even further for more security, forcing clients to use the server's protocol
+suite, and ways to force selection of particular algorithms.
+
+
+
+(8): How do I use tls_require_ciphers?
+--------------------------------------
+
+This is the name of two options in Exim.  One is a main section option, used
+by Exim as a server when a client initiates SSL/TLS negotiation, the other is
+an option on transports which use "driver = smtp", used when Exim initiates
+SSL/TLS as a client talking to a remote server.
+
+The option is expanded and so can take advantage of any variables which have
+been set.  This includes the IP address of the remote side, the port upon
+which a connection was accepted (when a server), and more.  Currently it does
+not have access to $tls_sni, whether as a client or as a server.
+
+This example, for the main section's option, will let the library defaults be
+permitted on the MX port, where there's probably no identity verification
+anyway, and lowers security further by increasing compatibility; but this ups
+the ante on the submission ports where the administrator might have some
+influence on the choice of clients used:
+
+tls_require_ciphers = ${if =={$received_port}{25}\
+                           {NORMAL:%COMPAT}\
+                           {SECURE128}}
+
+Note that during Exim start-up, when this option is sanity-checked, there will
+be no value of $received_port.  In the above example, the checked value will
+thus be "SECURE128".  Be careful to ensure that it always expands safely.
+
+
+
+(9): How do I test STARTTLS support?
+------------------------------------
+
+The best command-line client for debugging specifically SSL/TLS which this
+author has encountered is part of the GnuTLS suite, and is called
+"gnutls-cli".  It's best because it's the only interactive tool which lets the
+user start TLS handshake exactly when they wish, so can choose to use the
+STARTTLS command.
+
+$ gnutls-cli --starttls --crlf --port 587 mail.example.org
+
+After EHLO, to see the capabilities, enter STARTTLS, wait for the response,
+then send EOF.  Typically that's done by typing Ctrl-D at the start of a line.
+The "gnutls-cli" tool will take over, set up TLS (or fail) and by the time it
+returns to await more user input, you're using a secure connection and should
+type your second EHLO.
+
+The "--x509cafile" option may be helpful for checking certificates and
+"--priority" to pass a priority string to the client tool for configuring it.
+
+The --crlf is for strict protocol correctness, but Exim doesn't really need
+it, so "gnutls-cli -s -p 587 mail.example.org" is shorter.
+
+
+For debugging SMTP as a whole, we recommend swaks, "Swiss Army Knife SMTP", by
+John Jetmore (one of the Exim Maintainers).  This has some TLS tuning options;
+it can be found at:
+
+  http://www.jetmore.org/john/code/swaks/
+
+
+For OpenSSL, the "openssl s_client" command helps; you can either set up Exim
+with a listening port which is SSL-on-connect or tell s_client to use
+STARTTLS.
+
+For the former, use the "tls_on_connect_ports" option and the
+"daemon_smtp_ports" option.  Most clients for SSL-on-connect use the port
+which was briefly registered with IANA for this purpose, 465.  So you would
+set something like:
+
+  daemon_smtp_ports = 25 : 465 : 587
+  tls_on_connect_ports = 465
+
+To use s_client with STARTTLS support, use "-starttls smtp" on the
+command-line.  Beware that older versions of OpenSSL did not wait for the SMTP
+banner before sending EHLO, which will fall afoul of the protocol
+synchronisation checks in Exim (used to trip up pump-and-dump spammers); also
+you will not get control of the session until TLS is established.  That said,
+this tool provides more tuning hooks for adjusting how TLS will be set up than
+most.
+
+*BEWARE* that by default, s_client will take any line starting with a capital
+letter "R" to be a request to initiate TLS renegotiation with the server and
+the line will not be sent.  This may trip up "RCPT TO:<someone@example.org>"
+lines in SMTP.  SMTP is not case-sensitive, so type "rcpt to" instead.
+Alternatively, invoke s_client with the "-ign_eof" option to disable this
+R-filtering and a few other features.
+
+
+# END OF FAQ
diff --git a/doc/NewStuff b/doc/NewStuff
new file mode 100644
index 0000000..2986b2c
--- /dev/null
+++ b/doc/NewStuff
@@ -0,0 +1,1476 @@
+New Features in Exim
+--------------------
+
+This file contains descriptions of new features that have been added to Exim.
+Before a formal release, there may be quite a lot of detail so that people can
+test from the snapshots or the Git before the documentation is updated. Once
+the documentation is updated, this file is reduced to a short list.
+
+Version 4.96
+------------
+
+ 1. A new ACL condition: seen. Records/tests a timestamp against a key.
+
+ 2. A variant of the "mask" expansion operator to give normalised IPv6.
+
+ 3. UTC output option for exim_dumpdb, exim_fixdb.
+
+ 4. An event for failing TLS connects to the daemon.
+
+ 5. The ACL "debug" control gains options "stop", "pretrigger" and "trigger".
+
+ 6. Query-style lookups are now checked for quoting, if the query string is
+    built using untrusted data ("tainted").  For now lack of quoting is merely
+    logged; a future release will upgrade this to an error.
+
+ 7. The expansion conditions match_<list-type> and inlist now set $value for
+    the expansion of the "true" result of the ${if}.  With a static list, this
+    can be used for de-tainting.
+
+ 8. Recipient verify callouts now set $domain_data & $local_part_data, with
+    de-tainted values.
+
+Version 4.95
+------------
+
+ 1. The fast-ramp two phase queue run support, previously experimental, is
+    now supported by default.
+
+ 2. The native SRS support, previously experimental, is now supported. It is
+    not built unless specified in the Local/Makefile.
+
+ 3. TLS resumption support, previously experimental, is now supported and
+    included in default builds.
+
+ 4. Single-key LMDB lookups, previously experimental, are now supported.
+    The support is not built unless specified in the Local/Makefile.
+
+ 5. Option "message_linelength_limit" on the smtp transport to enforce (by
+    default) the RFC 998 character limit.
+
+ 6. An option to ignore the cache on a lookup.
+
+ 7. Quota checking during reception (i.e. at SMTP time) for appendfile-
+    transport-managed quotas.
+
+ 8. Sqlite lookups accept a "file=<path>" option to specify a per-operation
+    db file, replacing the previous prefix to the SQL string (which had
+    issues when the SQL used tainted values).
+
+ 9. Lsearch lookups accept a "ret=full" option, to return both the portion
+    of the line matching the key, and the remainder.
+
+10. A command-line option to have a daemon not create a notifier socket.
+
+11. Faster TLS startup.  When various configuration options contain no
+    expandable elements, the information can be preloaded and cached rather
+    than the previous behaviour of always loading at startup time for every
+    connection.  This helps particularly for the CA bundle.
+
+12. Proxy Protocol Timeout is configurable via "proxy_protocol_timeout"
+    main config option.
+
+13. Option "smtp_accept_max_per_connection" is now expanded.
+
+14. Log selector "queue_time_exclusive", enabled by default, to exclude the
+    time taken for reception from QT log elements.
+
+15. Main option "smtp_backlog_monitor", to set a level above which listen
+    socket backlogs are logged.
+
+16. Main option "hosts_require_helo", requiring HELO or EHLO before MAIL.
+
+17. A main config option "allow_insecure_tainted_data" allows to turn
+
+18. TLS ALPN handling.  By default, refuse TLS connections that try to specify
+    a non-smtp (eg. http) use.  Options for customising.
+
+19. Support for MacOS (darwin) has been dropped.
+
+
+Version 4.94
+------------
+
+ 1. EXPERIMENTAL_SRS_NATIVE optional build feature.  See the experimental.spec
+    file.
+
+ 2. Channel-binding for authenticators is now supported under OpenSSL.
+    Previously it was GnuTLS-only.
+
+ 3. A msg:defer event.
+
+ 4. Client-side support in the gsasl authenticator.  Tested against the
+    plaintext driver for PLAIN; only against itself for SCRAM-SHA-1 and
+    SCRAM-SHA-1-PLUS methods.
+
+ 5. Server-side support in the gsasl authenticator for encrypted passwords, as
+    an alternate for the existing plaintext.
+
+ 6. Variable $local_part_data now also set by router check_local_user option,
+    with an de-tainted version of $local_part.
+
+ 7. Named-list definitions can now be prefixed "hide" so that "-bP" commands do
+    not output the content.  Previously this could only be done on options.
+
+ 8. As an experimental feature, the dovecot authentication driver supports inet
+    sockets.  Previously it was unix-domain sockets only.
+
+ 9. The ACL control "queue_only" can also be spelled "queue", and now takes an
+    option "first_pass_route" to do the same as a "-odqs" on the command line.
+
+10. Items specified for the router and transport headers_remove option can use
+    a trailing asterisk to specify globbing.
+
+11. New $queue_size variable.
+
+12. New variables $local_part_{pre,suf}fix_v.
+
+13. New main option "sqlite_dbfile", for use in preference to prefixing the
+    lookup string.  The older method fails when tainted variables are used
+    in the lookup, as the filename becomes tainted.  The new method keeps the
+    filename separate.
+
+14. Options on the dsearch lookup, to return the full path and to filter
+    filetypes for matching.
+
+15. Options on pgsql and mysql lookups, to specify server separate from the
+    lookup string.
+
+16. An option on all single-key lookups, to return (on a hit) a de-tainted
+    version of the lookup key rather than the looked-up data.
+
+17. $domain_data and $local_part_data are now set by all list-match successes.
+    Previously only list items that performed lookups did so.
+    Also, matching list items that are tail-match or RE-match now set the
+    numeric variables $0 (etc) in the same way os other RE matches.
+
+18. Expansion item ${listquote {<char} {<item>}}.
+
+19. An option for the ${readsocket {}{}{}} expansion to make the result data
+    cacheable.
+
+20. dkim_verify_min_keysizes, a list of minimum acceptable public-key sizes.
+
+21. bounce_message_file and warn_message_file are now expanded before use.
+
+22. New main config option spf_smtp_comment_template to customise the
+    $spf_smtp_comment variable
+
+
+
+Version 4.93
+------------
+
+ 1. An "external" authenticator, per RFC 4422 Appendix A.
+
+ 2. A JSON lookup type, and JSON variants of the forall/any expansion conditions.
+
+ 3. Variables $tls_in_cipher_std, $tls_out_cipher_std giving the RFC names
+    for ciphersuites.
+
+ 4. Log_selectors "msg_id" (on by default) and "msg_id_created".
+
+ 5. A case_insensitive option for verify=not_blind.
+
+ 6. EXPERIMENTAL_TLS_RESUME optional build feature.  See the experimental.spec
+    file.
+
+ 7. A main option exim_version to override the version Exim
+    reports in verious places ($exim_version, $version_number).
+
+ 8. Expansion operator ${sha2_N:} for N=256, 384, 512.
+
+ 9. Router variables, $r_... settable from router options and usable in routers
+    and transports.
+
+10. The spf lookup now supports IPv6.
+
+11. Main options for DKIM verify to filter hash and key types.
+
+12. With TLS1.3, support for full-chain OCSP stapling.
+
+13. Dual-certificate stacks on servers now support OCSP stapling, under OpenSSL.
+
+14: An smtp:ehlo transport event, for observability of the remote offered features.
+
+15: Support under OpenSSL for writing NSS-style key files for packet-capture
+    decode.  The environment variable SSLKEYLOGFILE is used; if an absolute path
+    it must indicate a file under the spool directory; if relative the the spool
+    directory is prepended.  Works on the server side only.  Support under
+    GnuTLS was already there, being done purely by the library (server side
+    only, and exim must be run as root).
+
+16: Command-line option to move messages from one named queue to another.
+
+17. Variables $tls_in_ver, $tls_out_ver.
+
+
+Version 4.92
+--------------
+
+ 1. ${l_header:<name>} and ${l_h:<name>} expansion items, giving a colon-sep
+    list when there are multiple headers having a given name.  This matters
+    when individual headers are wrapped onto multiple lines; with previous
+    facilities hard to parse.
+
+ 2. The ${readsocket } expansion item now takes a "tls" option, doing the
+    obvious thing.
+
+ 3. EXPERIMENTAL_REQUIRETLS and EXPERIMENTAL_PIPE_CONNECT optional build
+    features.  See the experimental.spec file.
+
+ 4. If built with SUPPORT_I18N a "utf8_downconvert" option on the smtp transport.
+
+ 5. A "pipelining" log_selector.
+
+ 6. Builtin macros for supported log_selector and openssl_options values.
+
+ 7. JSON variants of the ${extract } expansion item.
+
+ 8. A "noutf8" debug option, for disabling the UTF-8 characters in debug output.
+
+ 9. TCP Fast Open support on MacOS.
+
+Version 4.91
+--------------
+
+ 1. Dual-certificate stacks on servers now support OCSP stapling, under GnuTLS
+    version 3.5.6 or later.
+
+ 2. DANE is now supported under GnuTLS version 3.0.0 or later.  Both GnuTLS and
+    OpenSSL versions are moved to mainline support from Experimental.
+    New SMTP transport option "dane_require_tls_ciphers".
+
+ 3. Feature macros for the compiled-in set of malware scanner interfaces.
+
+ 4. SPF support is promoted from Experimental to mainline status.  The template
+    src/EDITME makefile does not enable its inclusion.
+
+ 5. Logging control for DKIM verification.  The existing DKIM log line is
+    controlled by a "dkim_verbose" selector which is _not_ enabled by default.
+    A new tag "DKIM=<domain>" is added to <= lines by default, controlled by
+    a "dkim" log_selector.
+
+ 6. Receive duration on <= lines, under a new log_selector "receive_time".
+
+ 7. Options "ipv4_only" and "ipv4_prefer" on the dnslookup router and on
+    routing rules in the manualroute router.
+
+ 8. Expansion item ${sha3:<string>} / ${sha3_<N>:<string>} now also supported
+    under OpenSSL version 1.1.1 or later.
+
+ 9. DKIM operations can now use the Ed25519 algorithm in addition to RSA, under
+    GnuTLS 3.6.0 or OpenSSL 1.1.1 or later.
+
+10. Builtin feature-macros _CRYPTO_HASH_SHA3 and _CRYPTO_SIGN_ED25519, library
+    version dependent.
+
+11. "exim -bP macro <name>" returns caller-usable status.
+
+12. Expansion item ${authresults {<machine>}} for creating an
+    Authentication-Results: header.
+
+13. EXPERIMENTAL_ARC.  See the experimental.spec file.
+    See also new util/renew-opendmarc-tlds.sh script for use with DMARC/ARC.
+
+14: A dane:fail event, intended to facilitate reporting.
+
+15. "Lightweight" support for Redis Cluster. Requires redis_servers list to
+    contain all the servers in the cluster, all of which must be reachable from
+    the running exim instance. If the cluster has master/slave replication, the
+    list must contain all the master and slave servers.
+
+16. Add an option to the Avast scanner interface: "pass_unscanned". This
+    allows to treat unscanned files as clean. Files may be unscanned for
+    several reasons: decompression bombs, broken archives.
+
+
+Version 4.90
+------------
+
+ 1. PKG_CONFIG_PATH can now be set in Local/Makefile;
+    wildcards will be expanded, values are collapsed.
+
+ 2. The ${readsocket } expansion now takes an option to not shutdown the
+    connection after sending the query string.  The default remains to do so.
+
+ 3. An smtp transport option "hosts_noproxy_tls" to control whether multiple
+    deliveries on a single TCP connection can maintain a TLS connection
+    open.  By default disabled for all hosts, doing so saves the cost of
+    making new TLS sessions, at the cost of having to proxy the data via
+    another process.  Logging is also affected.
+
+ 4. A malware connection type for the FPSCAND protocol.
+
+ 5. An option for recipient verify callouts to hold the connection open for
+    further recipients and for delivery.
+
+ 6. The reproducible build $SOURCE_DATE_EPOCH environment variable is now
+    supported.
+
+ 7. Optionally, an alternate format for spool data-files which matches the
+    wire format - meaning more efficient reception and transmission (at the
+    cost of difficulty with standard Unix tools).  Only used for messages
+    received using the ESMTP CHUNKING option, and when a new main-section
+    option "spool_wireformat" (false by default) is set.
+
+ 8. New main configuration option "commandline_checks_require_admin" to
+    restrict who can use various introspection options.
+
+ 9. New option modifier "no_check" for quota and quota_filecount
+    appendfile transport.
+
+10. Variable $smtp_command_history returning a comma-sep list of recent
+    SMTP commands.
+
+11. Millisecond timetamps in logs, on log_selector "millisec".  Also affects
+    log elements QT, DT and D, and timstamps in debug output.
+
+12. TCP Fast Open logging.  As a server, logs when the SMTP banner was sent
+    while still in SYN_RECV state; as a client logs when the connection
+    is opened with a TFO cookie.
+
+13. DKIM support for multiple signing, by domain and/or key-selector.
+    DKIM support for multiple hashes, and for alternate-identity tags.
+    Builtin macro with default list of signed headers.
+    Better syntax for specifying oversigning.
+    The DKIM ACL can override verification status, and status is visible in
+    the data ACL.
+
+14. Exipick understands -C|--config for an alternative Exim
+    configuration file.
+
+15. TCP Fast Open used, with data-on-SYN, for client SMTP via SOCKS5 proxy,
+    for ${readsocket } expansions, and for ClamAV.
+
+16. The "-be" expansion test mode now supports macros.  Macros are expanded
+    in test lines, and new macros can be defined.
+
+17. Support for server-side dual-certificate-stacks (eg. RSA + ECDSA).
+
+
+Version 4.89
+------------
+
+ 1. Allow relative config file names for ".include"
+
+ 2. A main-section config option "debug_store" to control the checks on
+    variable locations during store-reset.  Normally false but can be enabled
+    when a memory corruption issue is suspected on a production system.
+
+
+Version 4.88
+------------
+
+ 1. The new perl_taintmode option allows to run the embedded perl
+    interpreter in taint mode.
+
+ 2. New log_selector: dnssec, adds a "DS" tag to acceptance and delivery lines.
+
+ 3. Speculative debugging, via a "kill" option to the "control=debug" ACL
+    modifier.
+
+ 4. New expansion item ${sha3:<string>} / ${sha3_<N>:<string>}.
+    N can be 224, 256 (default), 384, 512.
+    With GnuTLS 3.5.0 or later, only.
+
+ 5. Facility for named queues:  A command-line argument can specify
+    the queue name for a queue operation, and an ACL modifier can set
+    the queue to be used for a message.  A $queue_name variable gives
+    visibility.
+
+ 6. New expansion operators base32/base32d.
+
+ 7. The CHUNKING ESMTP extension from RFC 3030.  May give some slight
+    performance increase and network load decrease.  Main config option
+    chunking_advertise_hosts, and smtp transport option hosts_try_chunking
+    for control.
+
+ 8. LMDB lookup support, as Experimental. Patch supplied by Andrew Colin Kissa.
+
+ 9. Expansion operator escape8bit, like escape but not touching newline etc..
+
+10. Feature macros, generated from compile options.  All start with "_HAVE_"
+    and go on with some roughly recognisable name.  Driver macros, for
+    router, transport and authentication drivers; names starting with "_DRIVER_".
+    Option macros, for each configuration-file option; all start with "_OPT_".
+    Use the "-bP macros" command-line option to see what is present.
+
+11. Integer values for options can take a "G" multiplier.
+
+12. defer=pass option for the ACL control cutthrough_delivery, to reflect 4xx
+    returns from the target back to the initiator, rather than spooling the
+    message.
+
+13. New built-in constants available for tls_dhparam and default changed.
+
+14. If built with EXPERIMENTAL_QUEUEFILE, a queuefile transport, for writing
+    out copies of the message spool files for use by 3rd-party scanners.
+
+15. A new option on the smtp transport, hosts_try_fastopen.  If the system
+    supports it (on Linux it must be enabled in the kernel by the sysadmin)
+    try to use RFC 7413 "TCP Fast Open".  No data is sent on the SYN segment
+    but it permits a peer that also supports the facility to send its SMTP
+    banner immediately after the SYN,ACK segment rather then waiting for
+    another ACK - so saving up to one roundtrip time.  Because it requires
+    previous communication with the peer (we save a cookie from it) this
+    will only become active on frequently-contacted destinations.
+
+16. A new syslog_pid option to suppress PID duplication in syslog lines.
+
+
+Version 4.87
+------------
+
+ 1. The ACL conditions regex and mime_regex now capture substrings
+    into numeric variables $regex1 to 9, like the "match" expansion condition.
+
+ 2. New $callout_address variable records the address used for a spam=,
+    malware= or verify= callout.
+
+ 3. Transports now take a "max_parallel" option, to limit concurrency.
+
+ 4. Expansion operators ${ipv6norm:<string>} and ${ipv6denorm:<string>}.
+    The latter expands to a 8-element colon-sep set of hex digits including
+    leading zeroes. A trailing ipv4-style dotted-decimal set is converted
+    to hex.  Pure ipv4 addresses are converted to IPv4-mapped IPv6.
+    The former operator strips leading zeroes and collapses the longest
+    set of 0-groups to a double-colon.
+
+ 5. New "-bP config" support, to dump the effective configuration.
+
+ 6. New $dkim_key_length variable.
+
+ 7. New base64d and base64 expansion items (the existing str2b64 being a
+    synonym of the latter).  Add support in base64 for certificates.
+
+ 8. New main configuration option "bounce_return_linesize_limit" to
+    avoid oversize bodies in bounces. The default value matches RFC
+    limits.
+
+ 9. New $initial_cwd expansion variable.
+
+
+Version 4.86
+------------
+
+ 1. Support for using the system standard CA bundle.
+
+ 2. New expansion items $config_file, $config_dir, containing the file
+    and directory name of the main configuration file. Also $exim_version.
+
+ 3. New "malware=" support for Avast.
+
+ 4. New "spam=" variant option for Rspamd.
+
+ 5. Assorted options on malware= and spam= scanners.
+
+ 6. A command-line option to write a comment into the logfile.
+
+ 7. If built with EXPERIMENTAL_SOCKS feature enabled, the smtp transport can
+    be configured to make connections via socks5 proxies.
+
+ 8. If built with EXPERIMENTAL_INTERNATIONAL, support is included for
+    the transmission of UTF-8 envelope addresses.
+
+ 9. If built with EXPERIMENTAL_INTERNATIONAL, an expansion item for a commonly
+    used encoding of Maildir folder names.
+
+10. A logging option for slow DNS lookups.
+
+11. New ${env {<variable>}} expansion.
+
+12. A non-SMTP authenticator using information from TLS client certificates.
+
+13. Main option "tls_eccurve" for selecting an Elliptic Curve for TLS.
+    Patch originally by Wolfgang Breyha.
+
+14. Main option "dns_trust_aa" for trusting your local nameserver at the
+    same level as DNSSEC.
+
+Version 4.85
+------------
+
+ 1. If built with EXPERIMENTAL_DANE feature enabled, Exim will follow the
+    DANE SMTP draft to assess a secure chain of trust of the certificate
+    used to establish the TLS connection based on a TLSA record in the
+    domain of the sender.
+
+ 2. The EXPERIMENTAL_TPDA feature has been renamed to EXPERIMENTAL_EVENT
+    and several new events have been created. The reason is because it has
+    been expanded beyond just firing events during the transport phase. Any
+    existing TPDA transport options will have to be rewritten to use a new
+    $event_name expansion variable in a condition. Refer to the
+    experimental-spec.txt for details and examples.
+
+ 3. The EXPERIMENTAL_CERTNAMES features is an enhancement to verify that
+    server certs used for TLS match the result of the MX lookup. It does
+    not use the same mechanism as DANE.
+
+
+Version 4.84
+------------
+
+
+Version 4.83
+------------
+
+ 1. If built with the EXPERIMENTAL_PROXY feature enabled, Exim can be
+    configured to expect an initial header from a proxy that will make the
+    actual external source IP:host be used in exim instead of the IP of the
+    proxy that is connecting to it.
+
+ 2. New verify option header_names_ascii, which will check to make sure
+    there are no non-ASCII characters in header names.  Exim itself handles
+    those non-ASCII characters, but downstream apps may not, so Exim can
+    detect and reject if those characters are present.
+
+ 3. New expansion operator ${utf8clean:string} to replace malformed UTF8
+    codepoints with valid ones.
+
+ 4. New malware type "sock".  Talks over a Unix or TCP socket, sending one
+    command line and matching a regex against the return data for trigger
+    and a second regex to extract malware_name.  The mail spoolfile name can
+    be included in the command line.
+
+ 5. The smtp transport now supports options "tls_verify_hosts" and
+    "tls_try_verify_hosts".  If either is set the certificate verification
+    is split from the encryption operation. The default remains that a failed
+    verification cancels the encryption.
+
+ 6. New SERVERS override of default ldap server list.  In the ACLs, an ldap
+    lookup can now set a list of servers to use that is different from the
+    default list.
+
+ 7. New command-line option -C for exiqgrep to specify alternate exim.conf
+    file when searching the queue.
+
+ 8. OCSP now supports GnuTLS also, if you have version 3.1.3 or later of that.
+
+ 9. Support for DNSSEC on outbound connections.
+
+10. New variables "tls_(in,out)_(our,peer)cert" and expansion item
+    "certextract" to extract fields from them. Hash operators md5 and sha1
+    work over them for generating fingerprints, and a new sha256 operator
+    for them added.
+
+11. PRDR is now supported dy default.
+
+12. OCSP stapling is now supported by default.
+
+13. If built with the EXPERIMENTAL_DSN feature enabled, Exim will output
+    Delivery Status Notification messages in MIME format, and negotiate
+    DSN features per RFC 3461.
+
+
+Version 4.82
+------------
+
+ 1. New command-line option -bI:sieve will list all supported sieve extensions
+    of this Exim build on standard output, one per line.
+    ManageSieve (RFC 5804) providers managing scripts for use by Exim should
+    query this to establish the correct list to include in the protocol's
+    SIEVE capability line.
+
+ 2. If the -n option is combined with the -bP option, then the name of an
+    emitted option is not output, only the value (if visible to you).
+    For instance, "exim -n -bP pid_file_path" should just emit a pathname
+    followed by a newline, and no other text.
+
+ 3. When built with SUPPORT_TLS and USE_GNUTLS, the SMTP transport driver now
+    has a "tls_dh_min_bits" option, to set the minimum acceptable number of
+    bits in the Diffie-Hellman prime offered by a server (in DH ciphersuites)
+    acceptable for security.  (Option accepted but ignored if using OpenSSL).
+    Defaults to 1024, the old value.  May be lowered only to 512, or raised as
+    far as you like.  Raising this may hinder TLS interoperability with other
+    sites and is not currently recommended.  Lowering this will permit you to
+    establish a TLS session which is not as secure as you might like.
+
+    Unless you really know what you are doing, leave it alone.
+
+ 4. If not built with DISABLE_DNSSEC, Exim now has the main option
+    dns_dnssec_ok; if set to 1 then Exim will initialise the resolver library
+    to send the DO flag to your recursive resolver.  If you have a recursive
+    resolver, which can set the Authenticated Data (AD) flag in results, Exim
+    can now detect this.  Exim does not perform validation itself, instead
+    relying upon a trusted path to the resolver.
+
+    Current status: work-in-progress; $sender_host_dnssec variable added.
+
+ 5. DSCP support for outbound connections: on a transport using the smtp driver,
+    set "dscp = ef", for instance, to cause the connections to have the relevant
+    DSCP (IPv4 TOS or IPv6 TCLASS) value in the header.
+
+    Similarly for inbound connections, there is a new control modifier, dscp,
+    so "warn control = dscp/ef" in the connect ACL, or after authentication.
+
+    Supported values depend upon system libraries.  "exim -bI:dscp" to list the
+    ones Exim knows of.  You can also set a raw number 0..0x3F.
+
+ 6. The -G command-line flag is no longer ignored; it is now equivalent to an
+    ACL setting "control = suppress_local_fixups".  The -L command-line flag
+    is now accepted and forces use of syslog, with the provided tag as the
+    process name.  A few other flags used by Sendmail are now accepted and
+    ignored.
+
+ 7. New cutthrough routing feature.  Requested by a "control = cutthrough_delivery"
+    ACL modifier; works for single-recipient mails which are received on and
+    deliverable via SMTP.  Using the connection made for a recipient verify,
+    if requested before the verify, or a new one made for the purpose while
+    the inbound connection is still active.  The bulk of the mail item is copied
+    direct from the inbound socket to the outbound (as well as the spool file).
+    When the source notifies the end of data, the data acceptance by the destination
+    is negotiated before the acceptance is sent to the source.  If the destination
+    does not accept the mail item, for example due to content-scanning, the item
+    is not accepted from the source and therefore there is no need to generate
+    a bounce mail.  This is of benefit when providing a secondary-MX service.
+    The downside is that delays are under the control of the ultimate destination
+    system not your own.
+
+    The Received-by: header on items delivered by cutthrough is generated
+    early in reception rather than at the end; this will affect any timestamp
+    included.  The log line showing delivery is recorded before that showing
+    reception; it uses a new ">>" tag instead of "=>".
+
+    To support the feature, verify-callout connections can now use ESMTP and TLS.
+    The usual smtp transport options are honoured, plus a (new, default everything)
+    hosts_verify_avoid_tls.
+
+    New variable families named tls_in_cipher, tls_out_cipher etc. are introduced
+    for specific access to the information for each connection.  The old names
+    are present for now but deprecated.
+
+    Not yet supported: IGNOREQUOTA, SIZE, PIPELINING.
+
+ 8. New expansion operators ${listnamed:name} to get the content of a named list
+    and ${listcount:string} to count the items in a list.
+
+ 9. New global option "gnutls_allow_auto_pkcs11", defaults false.  The GnuTLS
+    rewrite in 4.80 combines with GnuTLS 2.12.0 or later, to autoload PKCS11
+    modules.  For some situations this is desirable, but we expect admin in
+    those situations to know they want the feature.  More commonly, it means
+    that GUI user modules get loaded and are broken by the setuid Exim being
+    unable to access files specified in environment variables and passed
+    through, thus breakage.  So we explicitly inhibit the PKCS11 initialisation
+    unless this new option is set.
+
+    Some older OS's with earlier versions of GnuTLS might not have pkcs11 ability,
+    so have also added a build option which can be used to build Exim with GnuTLS
+    but without trying to use any kind of PKCS11 support.  Uncomment this in the
+    Local/Makefile:
+
+    AVOID_GNUTLS_PKCS11=yes
+
+10. The "acl = name" condition on an ACL now supports optional arguments.
+    New expansion item "${acl {name}{arg}...}" and expansion condition
+    "acl {{name}{arg}...}" are added.  In all cases up to nine arguments
+    can be used, appearing in $acl_arg1 to $acl_arg9 for the called ACL.
+    Variable $acl_narg contains the number of arguments.  If the ACL sets
+    a "message =" value this becomes the result of the expansion item,
+    or the value of $value for the expansion condition.  If the ACL returns
+    accept the expansion condition is true; if reject, false.  A defer
+    return results in a forced fail.
+
+11. Routers and transports can now have multiple headers_add and headers_remove
+    option lines.  The concatenated list is used.
+
+12. New ACL modifier "remove_header" can remove headers before message gets
+    handled by routers/transports.
+
+13. New dnsdb lookup pseudo-type "a+".  A sequence of "a6" (if configured),
+    "aaaa" and "a" lookups is done and the full set of results returned.
+
+14. New expansion variable $headers_added with content from ACL add_header
+    modifier (but not yet added to message).
+
+15. New 8bitmime status logging option for received messages.  Log field "M8S".
+
+16. New authenticated_sender logging option, adding to log field "A".
+
+17. New expansion variables $router_name and $transport_name.  Useful
+    particularly for debug_print as -bt command-line option does not
+    require privilege whereas -d does.
+
+18. If built with EXPERIMENTAL_PRDR, per-recipient data responses per a
+    proposed extension to SMTP from Eric Hall.
+
+19. The pipe transport has gained the force_command option, to allow
+    decorating commands from user .forward pipe aliases with prefix
+    wrappers, for instance.
+
+20. Callout connections can now AUTH; the same controls as normal delivery
+    connections apply.
+
+21. Support for DMARC, using opendmarc libs, can be enabled. It adds new
+    options: dmarc_forensic_sender, dmarc_history_file, and dmarc_tld_file.
+    It adds new expansion variables $dmarc_ar_header, $dmarc_status,
+    $dmarc_status_text, and $dmarc_used_domain.  It adds a new acl modifier
+    dmarc_status.  It adds new control flags dmarc_disable_verify and
+    dmarc_enable_forensic. The default for the dmarc_tld_file option is
+    "/etc/exim/opendmarc.tlds" and can be changed via EDITME.
+
+22. Add expansion variable $authenticated_fail_id, which is the username
+    provided to the authentication method which failed.  It is available
+    for use in subsequent ACL processing (typically quit or notquit ACLs).
+
+23. New ACL modifier "udpsend" can construct a UDP packet to send to a given
+    UDP host and port.
+
+24. New ${hexquote:..string..} expansion operator converts non-printable
+    characters in the string to \xNN form.
+
+25. Experimental TPDA (Transport Post Delivery Action) function added.
+    Patch provided by Axel Rau.
+
+26. Experimental Redis lookup added. Patch provided by Warren Baker.
+
+
+Version 4.80
+------------
+
+ 1. New authenticator driver, "gsasl".  Server-only (at present).
+    This is a SASL interface, licensed under GPL, which can be found at
+    http://www.gnu.org/software/gsasl/.
+    This system does not provide sources of data for authentication, so
+    careful use needs to be made of the conditions in Exim.
+
+ 2. New authenticator driver, "heimdal_gssapi".  Server-only.
+    A replacement for using cyrus_sasl with Heimdal, now that $KRB5_KTNAME
+    is no longer honoured for setuid programs by Heimdal.  Use the
+    "server_keytab" option to point to the keytab.
+
+ 3. The "pkg-config" system can now be used when building Exim to reference
+    cflags and library information for lookups and authenticators, rather
+    than having to update "CFLAGS", "AUTH_LIBS", "LOOKUP_INCLUDE" and
+    "LOOKUP_LIBS" directly.  Similarly for handling the TLS library support
+    without adjusting "TLS_INCLUDE" and "TLS_LIBS".
+
+    In addition, setting PCRE_CONFIG=yes will query the pcre-config tool to
+    find the headers and libraries for PCRE.
+
+ 4. New expansion variable $tls_bits.
+
+ 5. New lookup type, "dbmjz".  Key is an Exim list, the elements of which will
+    be joined together with ASCII NUL characters to construct the key to pass
+    into the DBM library.  Can be used with gsasl to access sasldb2 files as
+    used by Cyrus SASL.
+
+ 6. OpenSSL now supports TLS1.1 and TLS1.2 with OpenSSL 1.0.1.
+
+    Avoid release 1.0.1a if you can.  Note that the default value of
+    "openssl_options" is no longer "+dont_insert_empty_fragments", as that
+    increased susceptibility to attack.  This may still have interoperability
+    implications for very old clients (see version 4.31 change 37) but
+    administrators can choose to make the trade-off themselves and restore
+    compatibility at the cost of session security.
+
+ 7. Use of the new expansion variable $tls_sni in the main configuration option
+    tls_certificate will cause Exim to re-expand the option, if the client
+    sends the TLS Server Name Indication extension, to permit choosing a
+    different certificate; tls_privatekey will also be re-expanded.  You must
+    still set these options to expand to valid files when $tls_sni is not set.
+
+    The SMTP Transport has gained the option tls_sni, which will set a hostname
+    for outbound TLS sessions, and set $tls_sni too.
+
+    A new log_selector, +tls_sni, has been added, to log received SNI values
+    for Exim as a server.
+
+ 8. The existing "accept_8bitmime" option now defaults to true.  This means
+    that Exim is deliberately not strictly RFC compliant.  We're following
+    Dan Bernstein's advice in http://cr.yp.to/smtp/8bitmime.html by default.
+    Those who disagree, or know that they are talking to mail servers that,
+    even today, are not 8-bit clean, need to turn off this option.
+
+ 9. Exim can now be started with -bw (with an optional timeout, given as
+    -bw<timespec>).  With this, stdin at startup is a socket that is
+    already listening for connections.  This has a more modern name of
+    "socket activation", but forcing the activated socket to fd 0.  We're
+    interested in adding more support for modern variants.
+
+10. ${eval } now uses 64-bit values on supporting platforms.  A new "G" suffix
+    for numbers indicates multiplication by 1024^3.
+
+11. The GnuTLS support has been revamped; the three options gnutls_require_kx,
+    gnutls_require_mac & gnutls_require_protocols are no longer supported.
+    tls_require_ciphers is now parsed by gnutls_priority_init(3) as a priority
+    string, documentation for which is at:
+    http://www.gnutls.org/manual/html_node/Priority-Strings.html
+
+    SNI support has been added to Exim's GnuTLS integration too.
+
+    For sufficiently recent GnuTLS libraries, ${randint:..} will now use
+    gnutls_rnd(), asking for GNUTLS_RND_NONCE level randomness.
+
+12. With OpenSSL, if built with EXPERIMENTAL_OCSP, a new option tls_ocsp_file
+    is now available.  If the contents of the file are valid, then Exim will
+    send that back in response to a TLS status request; this is OCSP Stapling.
+    Exim will not maintain the contents of the file in any way: administrators
+    are responsible for ensuring that it is up-to-date.
+
+    See "experimental-spec.txt" for more details.
+
+13. ${lookup dnsdb{ }} supports now SPF record types. They are handled
+    identically to TXT record lookups.
+
+14. New expansion variable $tod_epoch_l for higher-precision time.
+
+15. New global option tls_dh_max_bits, defaulting to current value of NSS
+    hard-coded limit of DH ephemeral bits, to fix interop problems caused by
+    GnuTLS 2.12 library recommending a bit count higher than NSS supports.
+
+16. tls_dhparam now used by both OpenSSL and GnuTLS, can be path or identifier.
+    Option can now be a path or an identifier for a standard prime.
+    If unset, we use the DH prime from section 2.2 of RFC 5114, "ike23".
+    Set to "historic" to get the old GnuTLS behaviour of auto-generated DH
+    primes.
+
+17. SSLv2 now disabled by default in OpenSSL.  (Never supported by GnuTLS).
+    Use "openssl_options -no_sslv2" to re-enable support, if your OpenSSL
+    install was not built with OPENSSL_NO_SSL2 ("no-ssl2").
+
+
+Version 4.77
+------------
+
+ 1. New options for the ratelimit ACL condition: /count= and /unique=.
+    The /noupdate option has been replaced by a /readonly option.
+
+ 2. The SMTP transport's protocol option may now be set to "smtps", to
+    use SSL-on-connect outbound.
+
+ 3. New variable $av_failed, set true if the AV scanner deferred; ie, when
+    there is a problem talking to the AV scanner, or the AV scanner running.
+
+ 4. New expansion conditions, "inlist" and "inlisti", which take simple lists
+    and check if the search item is a member of the list.  This does not
+    support named lists, but does subject the list part to string expansion.
+
+ 5. Unless the new EXPAND_LISTMATCH_RHS build option is set when Exim was
+    built, Exim no longer performs string expansion on the second string of
+    the match_* expansion conditions: "match_address", "match_domain",
+    "match_ip" & "match_local_part".  Named lists can still be used.
+
+
+Version 4.76
+------------
+
+ 1. The global option "dns_use_edns0" may be set to coerce EDNS0 usage on
+    or off in the resolver library.
+
+
+Version 4.75
+------------
+
+ 1. In addition to the existing LDAP and LDAP/SSL ("ldaps") support, there
+    is now LDAP/TLS support, given sufficiently modern OpenLDAP client
+    libraries.  The following global options have been added in support of
+    this: ldap_ca_cert_dir, ldap_ca_cert_file, ldap_cert_file, ldap_cert_key,
+    ldap_cipher_suite, ldap_require_cert, ldap_start_tls.
+
+ 2. The pipe transport now takes a boolean option, "freeze_signal", default
+    false.  When true, if the external delivery command exits on a signal then
+    Exim will freeze the message in the queue, instead of generating a bounce.
+
+ 3. Log filenames may now use %M as an escape, instead of %D (still available).
+    The %M pattern expands to yyyymm, providing month-level resolution.
+
+ 4. The $message_linecount variable is now updated for the maildir_tag option,
+    in the same way as $message_size, to reflect the real number of lines,
+    including any header additions or removals from transport.
+
+ 5. When contacting a pool of SpamAssassin servers configured in spamd_address,
+    Exim now selects entries randomly, to better scale in a cluster setup.
+
+
+Version 4.74
+------------
+
+ 1. SECURITY FIX: privilege escalation flaw fixed. On Linux (and only Linux)
+    the flaw permitted the Exim run-time user to cause root to append to
+    arbitrary files of the attacker's choosing, with the content based
+    on content supplied by the attacker.
+
+ 2. Exim now supports loading some lookup types at run-time, using your
+    platform's dlopen() functionality.  This has limited platform support
+    and the intention is not to support every variant, it's limited to
+    dlopen().  This permits the main Exim binary to not be linked against
+    all the libraries needed for all the lookup types.
+
+
+Version 4.73
+------------
+
+ NOTE: this version is not guaranteed backwards-compatible, please read the
+       items below carefully
+
+ 1. A new main configuration option, "openssl_options", is available if Exim
+    is built with SSL support provided by OpenSSL.  The option allows
+    administrators to specify OpenSSL options to be used on connections;
+    typically this is to set bug compatibility features which the OpenSSL
+    developers have not enabled by default.  There may be security
+    consequences for certain options, so these should not be changed
+    frivolously.
+
+ 2. A new pipe transport option, "permit_coredumps", may help with problem
+    diagnosis in some scenarios.  Note that Exim is typically installed as
+    a setuid binary, which on most OSes will inhibit coredumps by default,
+    so that safety mechanism would have to be overridden for this option to
+    be able to take effect.
+
+ 3. ClamAV 0.95 is now required for ClamAV support in Exim, unless
+    Local/Makefile sets: WITH_OLD_CLAMAV_STREAM=yes
+    Note that this switches Exim to use a new API ("INSTREAM") and a future
+    release of ClamAV will remove support for the old API ("STREAM").
+
+    The av_scanner option, when set to "clamd", now takes an optional third
+    part, "local", which causes Exim to pass a filename to ClamAV instead of
+    the file content.  This is the same behaviour as when clamd is pointed at
+    a Unix-domain socket.  For example:
+
+      av_scanner = clamd:192.0.2.3 1234:local
+
+    ClamAV's ExtendedDetectionInfo response format is now handled.
+
+ 4. There is now a -bmalware option, restricted to admin users.  This option
+    takes one parameter, a filename, and scans that file with Exim's
+    malware-scanning framework.  This is intended purely as a debugging aid
+    to ensure that Exim's scanning is working, not to replace other tools.
+    Note that the ACL framework is not invoked, so if av_scanner references
+    ACL variables without a fallback then this will fail.
+
+ 5. There is a new expansion operator, "reverse_ip", which will reverse IP
+    addresses; IPv4 into dotted quad, IPv6 into dotted nibble.  Examples:
+
+      ${reverse_ip:192.0.2.4}
+       -> 4.2.0.192
+      ${reverse_ip:2001:0db8:c42:9:1:abcd:192.0.2.3}
+       -> 3.0.2.0.0.0.0.c.d.c.b.a.1.0.0.0.9.0.0.0.2.4.c.0.8.b.d.0.1.0.0.2
+
+ 6. There is a new ACL control called "debug", to enable debug logging.
+    This allows selective logging of certain incoming transactions within
+    production environments, with some care.  It takes two options, "tag"
+    and "opts"; "tag" is included in the filename of the log and "opts"
+    is used as per the -d<options> command-line option.  Examples, which
+    don't all make sense in all contexts:
+
+      control = debug
+      control = debug/tag=.$sender_host_address
+      control = debug/opts=+expand+acl
+      control = debug/tag=.$message_exim_id/opts=+expand
+
+ 7. It has always been implicit in the design and the documentation that
+    "the Exim user" is not root.  src/EDITME said that using root was
+    "very strongly discouraged".  This is not enough to keep people from
+    shooting themselves in the foot in days when many don't configure Exim
+    themselves but via package build managers.  The security consequences of
+    running various bits of network code are severe if there should be bugs in
+    them.  As such, the Exim user may no longer be root.  If configured
+    statically, Exim will refuse to build.  If configured as ref:user then Exim
+    will exit shortly after start-up.  If you must shoot yourself in the foot,
+    then henceforth you will have to maintain your own local patches to strip
+    the safeties off.
+
+ 8. There is a new expansion condition, bool_lax{}.  Where bool{} uses the ACL
+    condition logic to determine truth/failure and will fail to expand many
+    strings, bool_lax{} uses the router condition logic, where most strings
+    do evaluate true.
+    Note: bool{00} is false, bool_lax{00} is true.
+
+ 9. Routers now support multiple "condition" tests.
+
+10. There is now a runtime configuration option "tcp_wrappers_daemon_name".
+    Setting this allows an admin to define which entry in the tcpwrappers
+    config file will be used to control access to the daemon.  This option
+    is only available when Exim is built with USE_TCP_WRAPPERS.  The
+    default value is set at build time using the TCP_WRAPPERS_DAEMON_NAME
+    build option.
+
+11. [POSSIBLE CONFIG BREAKAGE] The default value for system_filter_user is now
+    the Exim run-time user, instead of root.
+
+12. [POSSIBLE CONFIG BREAKAGE] ALT_CONFIG_ROOT_ONLY is no longer optional and
+    is forced on.  This is mitigated by the new build option
+    TRUSTED_CONFIG_LIST which defines a list of configuration files which
+    are trusted; one per line. If a config file is owned by root and matches
+    a pathname in the list, then it may be invoked by the Exim build-time
+    user without Exim relinquishing root privileges.
+
+13. [POSSIBLE CONFIG BREAKAGE] The Exim user is no longer automatically
+    trusted to supply -D<Macro[=Value]> overrides on the command-line.  Going
+    forward, we recommend using TRUSTED_CONFIG_LIST with shim configs that
+    include the main config.  As a transition mechanism, we are temporarily
+    providing a work-around: the new build option WHITELIST_D_MACROS provides
+    a colon-separated list of macro names which may be overridden by the Exim
+    run-time user.  The values of these macros are constrained to the regex
+    ^[A-Za-z0-9_/.-]*$ (which explicitly does allow for empty values).
+
+
+Version 4.72
+------------
+
+ 1. TWO SECURITY FIXES: one relating to mail-spools which are globally
+    writable, the other to locking of MBX folders (not mbox).
+
+ 2. MySQL stored procedures are now supported.
+
+ 3. The dkim_domain transport option is now a list, not a single string, and
+    messages will be signed for each element in the list (discarding
+    duplicates).
+
+ 4. The 4.70 release unexpectedly changed the behaviour of dnsdb TXT lookups
+    in the presence of multiple character strings within the RR. Prior to 4.70,
+    only the first string would be returned.  The dnsdb lookup now, by default,
+    preserves the pre-4.70 semantics, but also now takes an extended output
+    separator specification.  The separator can be followed by a semicolon, to
+    concatenate the individual text strings together with no join character,
+    or by a comma and a second separator character, in which case the text
+    strings within a TXT record are joined on that second character.
+    Administrators are reminded that DNS provides no ordering guarantees
+    between multiple records in an RRset.  For example:
+
+      foo.example.  IN TXT "a" "b" "c"
+      foo.example.  IN TXT "d" "e" "f"
+
+      ${lookup dnsdb{>/ txt=foo.example}}   -> "a/d"
+      ${lookup dnsdb{>/; txt=foo.example}}  -> "def/abc"
+      ${lookup dnsdb{>/,+ txt=foo.example}} -> "a+b+c/d+e+f"
+
+
+Version 4.70 / 4.71
+-------------------
+
+ 1. Native DKIM support without an external library.
+    (Note that if no action to prevent it is taken, a straight upgrade will
+    result in DKIM verification of all signed incoming emails.  See spec
+    for details on conditionally disabling)
+
+ 2. Experimental DCC support via dccifd (contributed by Wolfgang Breyha).
+
+ 3. There is now a bool{} expansion condition which maps certain strings to
+    true/false condition values (most likely of use in conjunction with the
+    and{} expansion operator).
+
+ 4. The $spam_score, $spam_bar and $spam_report variables are now available
+    at delivery time.
+
+ 5. exim -bP now supports "macros", "macro_list" or "macro MACRO_NAME" as
+    options, provided that Exim is invoked by an admin_user.
+
+ 6. There is a new option gnutls_compat_mode, when linked against GnuTLS,
+    which increases compatibility with older clients at the cost of decreased
+    security.  Don't set this unless you need to support such clients.
+
+ 7. There is a new expansion operator, ${randint:...} which will produce a
+    "random" number less than the supplied integer.  This randomness is
+    not guaranteed to be cryptographically strong, but depending upon how
+    Exim was built may be better than the most naive schemes.
+
+ 8. Exim now explicitly ensures that SHA256 is available when linked against
+    OpenSSL.
+
+ 9. The transport_filter_timeout option now applies to SMTP transports too.
+
+
+Version 4.69
+------------
+
+ 1. Preliminary DKIM support in Experimental.
+
+
+Version 4.68
+------------
+
+ 1. The body_linecount and body_zerocount C variables are now exported in the
+    local_scan API.
+
+ 2. When a dnslists lookup succeeds, the key that was looked up is now placed
+    in $dnslist_matched. When the key is an IP address, it is not reversed in
+    this variable (though it is, of course, in the actual lookup). In simple
+    cases, for example:
+
+      deny dnslists = spamhaus.example
+
+    the key is also available in another variable (in this case,
+    $sender_host_address). In more complicated cases, however, this is not
+    true. For example, using a data lookup might generate a dnslists lookup
+    like this:
+
+      deny dnslists = spamhaus.example/<|192.168.1.2|192.168.6.7|...
+
+    If this condition succeeds, the value in $dnslist_matched might be
+    192.168.6.7 (for example).
+
+ 3. Authenticators now have a client_condition option. When Exim is running as
+    a client, it skips an authenticator whose client_condition expansion yields
+    "0", "no", or "false". This can be used, for example, to skip plain text
+    authenticators when the connection is not encrypted by a setting such as:
+
+      client_condition = ${if !eq{$tls_cipher}{}}
+
+    Note that the 4.67 documentation states that $tls_cipher contains the
+    cipher used for incoming messages. In fact, during SMTP delivery, it
+    contains the cipher used for the delivery. The same is true for
+    $tls_peerdn.
+
+ 4. There is now a -Mvc <message-id> option, which outputs a copy of the
+    message to the standard output, in RFC 2822 format. The option can be used
+    only by an admin user.
+
+ 5. There is now a /noupdate option for the ratelimit ACL condition. It
+    computes the rate and checks the limit as normal, but it does not update
+    the saved data. This means that, in relevant ACLs, it is possible to lookup
+    the existence of a specified (or auto-generated) ratelimit key without
+    incrementing the ratelimit counter for that key.
+
+    In order for this to be useful, another ACL entry must set the rate
+    for the same key somewhere (otherwise it will always be zero).
+
+    Example:
+
+    acl_check_connect:
+      # Read the rate; if it doesn't exist or is below the maximum
+      # we update it below
+      deny ratelimit = 100 / 5m / strict / noupdate
+           log_message = RATE: $sender_rate / $sender_rate_period \
+                         (max $sender_rate_limit)
+
+      [... some other logic and tests...]
+
+      warn ratelimit = 100 / 5m / strict / per_cmd
+           log_message = RATE UPDATE: $sender_rate / $sender_rate_period \
+                         (max $sender_rate_limit)
+           condition = ${if le{$sender_rate}{$sender_rate_limit}}
+
+      accept
+
+ 6. The variable $max_received_linelength contains the number of bytes in the
+    longest line that was received as part of the message, not counting the
+    line termination character(s).
+
+ 7. Host lists can now include +ignore_defer and +include_defer, analogous to
+    +ignore_unknown and +include_unknown. These options should be used with
+    care, probably only in non-critical host lists such as whitelists.
+
+ 8. There's a new option called queue_only_load_latch, which defaults true.
+    If set false when queue_only_load is greater than zero, Exim re-evaluates
+    the load for each incoming message in an SMTP session. Otherwise, once one
+    message is queued, the remainder are also.
+
+ 9. There is a new ACL, specified by acl_smtp_notquit, which is run in most
+    cases when an SMTP session ends without sending QUIT. However, when Exim
+    itself is is bad trouble, such as being unable to write to its log files,
+    this ACL is not run, because it might try to do things (such as write to
+    log files) that make the situation even worse.
+
+    Like the QUIT ACL, this new ACL is provided to make it possible to gather
+    statistics. Whatever it returns (accept or deny) is immaterial. The "delay"
+    modifier is forbidden in this ACL.
+
+    When the NOTQUIT ACL is running, the variable $smtp_notquit_reason is set
+    to a string that indicates the reason for the termination of the SMTP
+    connection. The possible values are:
+
+      acl-drop                 Another ACL issued a "drop" command
+      bad-commands             Too many unknown or non-mail commands
+      command-timeout          Timeout while reading SMTP commands
+      connection-lost          The SMTP connection has been lost
+      data-timeout             Timeout while reading message data
+      local-scan-error         The local_scan() function crashed
+      local-scan-timeout       The local_scan() function timed out
+      signal-exit              SIGTERM or SIGINT
+      synchronization-error    SMTP synchronization error
+      tls-failed               TLS failed to start
+
+    In most cases when an SMTP connection is closed without having received
+    QUIT, Exim sends an SMTP response message before actually closing the
+    connection. With the exception of acl-drop, the default message can be
+    overridden by the "message" modifier in the NOTQUIT ACL. In the case of a
+    "drop" verb in another ACL, it is the message from the other ACL that is
+    used.
+
+10. For MySQL and PostgreSQL lookups, it is now possible to specify a list of
+    servers with individual queries. This is done by starting the query with
+    "servers=x:y:z;", where each item in the list may take one of two forms:
+
+    (1) If it is just a host name, the appropriate global option (mysql_servers
+        or pgsql_servers) is searched for a host of the same name, and the
+        remaining parameters (database, user, password) are taken from there.
+
+    (2) If it contains any slashes, it is taken as a complete parameter set.
+
+    The list of servers is used in exactly the same was as the global list.
+    Once a connection to a server has happened and a query has been
+    successfully executed, processing of the lookup ceases.
+
+    This feature is intended for use in master/slave situations where updates
+    are occurring, and one wants to update a master rather than a slave. If the
+    masters are in the list for reading, you might have:
+
+      mysql_servers = slave1/db/name/pw:slave2/db/name/pw:master/db/name/pw
+
+    In an updating lookup, you could then write
+
+      ${lookup mysql{servers=master; UPDATE ...}
+
+    If, on the other hand, the master is not to be used for reading lookups:
+
+      pgsql_servers = slave1/db/name/pw:slave2/db/name/pw
+
+    you can still update the master by
+
+      ${lookup pgsql{servers=master/db/name/pw; UPDATE ...}
+
+11. The message_body_newlines option (default FALSE, for backwards
+    compatibility) can be used to control whether newlines are present in
+    $message_body and $message_body_end. If it is FALSE, they are replaced by
+    spaces.
+
+
+Version 4.67
+------------
+
+ 1. There is a new log selector called smtp_no_mail, which is not included in
+    the default setting. When it is set, a line is written to the main log
+    whenever an accepted SMTP connection terminates without having issued a
+    MAIL command.
+
+ 2. When an item in a dnslists list is followed by = and & and a list of IP
+    addresses, the behaviour was not clear when the lookup returned more than
+    one IP address. This has been solved by the addition of == and =& for "all"
+    rather than the default "any" matching.
+
+ 3. Up till now, the only control over which cipher suites GnuTLS uses has been
+    for the cipher algorithms. New options have been added to allow some of the
+    other parameters to be varied.
+
+ 4. There is a new compile-time option called ENABLE_DISABLE_FSYNC. When it is
+    set, Exim compiles a runtime option called disable_fsync.
+
+ 5. There is a new variable called $smtp_count_at_connection_start.
+
+ 6. There's a new control called no_pipelining.
+
+ 7. There are two new variables called $sending_ip_address and $sending_port.
+    These are set whenever an SMTP connection to another host has been set up.
+
+ 8. The expansion of the helo_data option in the smtp transport now happens
+    after the connection to the server has been made.
+
+ 9. There is a new expansion operator ${rfc2047d: that decodes strings that
+    are encoded as per RFC 2047.
+
+10. There is a new log selector called "pid", which causes the current process
+    id to be added to every log line, in square brackets, immediately after the
+    time and date.
+
+11. Exim has been modified so that it flushes SMTP output before implementing
+    a delay in an ACL. It also flushes the output before performing a callout,
+    as this can take a substantial time. These behaviours can be disabled by
+    obeying control = no_delay_flush or control = no_callout_flush,
+    respectively, at some earlier stage of the connection.
+
+12. There are two new expansion conditions that iterate over a list. They are
+    called forany and forall.
+
+13. There's a new global option called dsn_from that can be used to vary the
+    contents of From: lines in bounces and other automatically generated
+    messages ("delivery status notifications" - hence the name of the option).
+
+14. The smtp transport has a new option called hosts_avoid_pipelining.
+
+15. By default, exigrep does case-insensitive matches. There is now a -I option
+    that makes it case-sensitive.
+
+16. A number of new features ("addresses", "map", "filter", and "reduce") have
+    been added to string expansions to make it easier to process lists of
+    items, typically addresses.
+
+17. There's a new ACL modifier called "continue". It does nothing of itself,
+    and processing of the ACL always continues with the next condition or
+    modifier. It is provided so that the side effects of expanding its argument
+    can be used.
+
+18. It is now possible to use newline and other control characters (those with
+    values less than 32, plus DEL) as separators in lists.
+
+19. The exigrep utility now has a -v option, which inverts the matching
+    condition.
+
+20. The host_find_failed option in the manualroute router can now be set to
+    "ignore".
+
+
+Version 4.66
+------------
+
+No new features were added to 4.66.
+
+
+Version 4.65
+------------
+
+No new features were added to 4.65.
+
+
+Version 4.64
+------------
+
+ 1. ACL variables can now be given arbitrary names, as long as they start with
+    "acl_c" or "acl_m" (for connection variables and message variables), are at
+    least six characters long, with the sixth character being either a digit or
+    an underscore.
+
+ 2. There is a new ACL modifier called log_reject_target. It makes it possible
+    to specify which logs are used for messages about ACL rejections.
+
+ 3. There is a new authenticator called "dovecot". This is an interface to the
+    authentication facility of the Dovecot POP/IMAP server, which can support a
+    number of authentication methods.
+
+ 4. The variable $message_headers_raw provides a concatenation of all the
+    messages's headers without any decoding. This is in contrast to
+    $message_headers, which does RFC2047 decoding on the header contents.
+
+ 5. In a DNS black list, if two domain names, comma-separated, are given, the
+    second is used first to do an initial check, making use of any IP value
+    restrictions that are set. If there is a match, the first domain is used,
+    without any IP value restrictions, to get the TXT record.
+
+ 6. All authenticators now have a server_condition option.
+
+ 7. There is a new command-line option called -Mset. It is useful only in
+    conjunction with -be (that is, when testing string expansions). It must be
+    followed by a message id; Exim loads the given message from its spool
+    before doing the expansions.
+
+ 8. Another similar new command-line option is called -bem. It operates like
+    -be except that it must be followed by the name of a file that contains a
+    message.
+
+ 9. When an address is delayed because of a 4xx response to a RCPT command, it
+    is now the combination of sender and recipient that is delayed in
+    subsequent queue runs until its retry time is reached.
+
+10. Unary negation and the bitwise logical operators and, or, xor, not, and
+    shift, have been added to the eval: and eval10: expansion items.
+
+11. The variables $interface_address and $interface_port have been renamed
+    as $received_ip_address and $received_port, to make it clear that they
+    relate to message reception rather than delivery. (The old names remain
+    available for compatibility.)
+
+12. The "message" modifier can now be used on "accept" and "discard" acl verbs
+    to vary the message that is sent when an SMTP command is accepted.
+
+
+Version 4.63
+------------
+
+1. There is a new Boolean option called filter_prepend_home for the redirect
+   router.
+
+2. There is a new acl, set by acl_not_smtp_start, which is run right at the
+   start of receiving a non-SMTP message, before any of the message has been
+   read.
+
+3. When an SMTP error message is specified in a "message" modifier in an ACL,
+   or in a :fail: or :defer: message in a redirect router, Exim now checks the
+   start of the message for an SMTP error code.
+
+4. There is a new parameter for LDAP lookups called "referrals", which takes
+   one of the settings "follow" (the default) or "nofollow".
+
+5. Version 20070721.2 of exipick now included, offering these new options:
+    --reverse
+        After all other sorting options have bee processed, reverse order
+        before displaying messages (-R is synonym).
+    --random
+        Randomize order of matching messages before displaying.
+    --size
+        Instead of displaying the matching messages, display the sum
+        of their sizes.
+    --sort <variable>[,<variable>...]
+        Before displaying matching messages, sort the messages according to
+        each messages value for each variable.
+    --not
+        Negate the value for every test (returns inverse output from the
+        same criteria without --not).
+
+
+Version 4.62
+------------
+
+1. The ${readsocket expansion item now supports Internet domain sockets as well
+   as Unix domain sockets. If the first argument begins "inet:", it must be of
+   the form "inet:host:port". The port is mandatory; it may be a number or the
+   name of a TCP port in /etc/services. The host may be a name, or it may be an
+   IP address. An ip address may optionally be enclosed in square brackets.
+   This is best for IPv6 addresses. For example:
+
+     ${readsocket{inet:[::1]:1234}{<request data>}...
+
+   Only a single host name may be given, but if looking it up yield more than
+   one IP address, they are each tried in turn until a connection is made. Once
+   a connection has been made, the behaviour is as for ${readsocket with a Unix
+   domain socket.
+
+2. If a redirect router sets up file or pipe deliveries for more than one
+   incoming address, and the relevant transport has batch_max set greater than
+   one, a batch delivery now occurs.
+
+3. The appendfile transport has a new option called maildirfolder_create_regex.
+   Its value is a regular expression. For a maildir delivery, this is matched
+   against the maildir directory; if it matches, Exim ensures that a
+   maildirfolder file is created alongside the new, cur, and tmp directories.
+
+
+Version 4.61
+------------
+
+The documentation is up-to-date for the 4.61 release. Major new features since
+the 4.60 release are:
+
+. An option called disable_ipv6, to disable the use of IPv6 completely.
+
+. An increase in the number of ACL variables to 20 of each type.
+
+. A change to use $auth1, $auth2, and $auth3 in authenticators instead of $1,
+  $2, $3, (though those are still set) because the numeric variables get used
+  for other things in complicated expansions.
+
+. The default for rfc1413_query_timeout has been changed from 30s to 5s.
+
+. It is possible to use setclassresources() on some BSD OS to control the
+  resources used in pipe deliveries.
+
+. A new ACL modifier called add_header, which can be used with any verb.
+
+. More errors are detectable in retry rules.
+
+There are a number of other additions too.
+
+
+Version 4.60
+------------
+
+The documentation is up-to-date for the 4.60 release. Major new features since
+the 4.50 release are:
+
+. Support for SQLite.
+
+. Support for IGNOREQUOTA in LMTP.
+
+. Extensions to the "submission mode" features.
+
+. Support for Client SMTP Authorization (CSA).
+
+. Support for ratelimiting hosts and users.
+
+. New expansion items to help with the BATV "prvs" scheme.
+
+. A "match_ip" condition, that matches an IP address against a list.
+
+There are many more minor changes.
+
+****
diff --git a/doc/OptionLists.txt b/doc/OptionLists.txt
new file mode 100644
index 0000000..55b0f36
--- /dev/null
+++ b/doc/OptionLists.txt
@@ -0,0 +1,1094 @@
+LISTS OF EXIM OPTIONS
+---------------------
+
+This file contains an almost complete lists of four kinds of Exim option:
+
+  1. Those that can appear in the run time configuration file;
+  2. Those that can be used on the command line;
+  3. Those that can appear in the build time configuration (Local/Makefile);
+  4. Those that can appear in the build time configuration for the Exim monitor
+     (Local/eximon.conf).
+
+This file was last updated for Exim release 4.95.
+
+
+1. RUN TIME OPTIONS
+-------------------
+
+As Exim has developed, new options have been added at each major release. For
+the most part, backwards compatibility has been maintained, and obsolete
+options continue to be recognized. However, incompatible changes took place at
+releases 3.00, and 4.00. In both cases, several groups of options were
+amalgamated into new, extended options, and obsolete options were removed.
+
+The table below contains a complete list of all Exim's current options, along
+with their types, default values, and where they can be used. String options
+that are expanded before use are marked with *. Host lists, domain lists, and
+address lists are always expanded. In some cases the defaults are not fixed
+values, or not short enough to fit in the table. These are indicated by +. Some
+other default values are determined when the Exim binary is compiled; these are
+indicated by ++.
+
+For options that are specific to a particular driver, the fourth column
+contains the driver name, for example, appendfile. Otherwise, it contains
+
+ . `main' for options that appear in the main section of Exim's configuration
+    file;
+
+ . `authenticators' for generic options that apply to any authenticator;
+
+ . `routers' for generic options that apply to any router;
+
+ . `transports' for generic options that apply to any transport.
+
+The fifth column contains the version of Exim in which the option was added, or
+substantially changed. Where no number is given, the option has been in Exim
+since the very early releases. The routers were completely reorganised for
+release 4.00, and so no router options are shown as earlier than 4.00, though
+in fact some of them were inherited from earlier versions.
+
+-----------------------------------------------------------------------------------------
+accept_8bitmime                      boolean         true          main              1.60 changed to true in 4.80
+acl_not_smtp                         string*         unset         main              4.11
+acl_not_smtp_mime                    string*         unset         main              4.51 with content scan
+acl_smtp_auth                        string*         unset         main              4.00
+acl_smtp_connect                     string*         unset         main              4.11
+acl_smtp_data                        string*         unset         main              4.00
+acl_smtp_data_prdr                   string*         unset         main              4.82 with experimental_prdr, 4.83 unless disable_prdr
+acl_smtp_dkim                        string*         unset         main              4.70 unless disable_dkim
+acl_smtp_etrn                        string*         unset         main              4.00
+acl_smtp_expn                        string*         unset         main              4.00
+acl_smtp_helo                        string*         unset         main              4.20
+acl_smtp_mail                        string*         unset         main              4.11
+acl_smtp_mailauth                    string*         unset         main              4.21
+acl_smtp_mime                        string*         unset         main              4.50 with content scan
+acl_smtp_predata                     string*         unset         main              4.43
+acl_smtp_quit                        string*         unset         main              4.43
+acl_smtp_rcpt                        string*         unset         main              4.00
+acl_smtp_starttls                    string*         unset         main              4.11
+acl_smtp_vrfy                        string*         unset         main              4.00
+address_data                         string*         unset         routers           4.00
+address_retry_include_sender         boolean         true          smtp              4.64
+address_test                         boolean         true          routers           4.14
+admin_groups                         string list     unset         main              3.02
+allow_domain_literals                boolean         false         main              4.00 replacing forbid_domain_literals
+allow_commands                       string list*    unset         pipe              1.89
+allow_defer                          boolean         false         redirect          4.00
+allow_fail                           boolean         false         redirect          4.00
+allow_filter                         boolean         false         redirect          4.00
+allow_freeze                         boolean         false         redirect          4.00
+allow_fifo                           boolean         false         appendfile        3.13
+allow_insecure_tainted_data          boolean         true          main              4.95 support will drop ~4.97ٍ
+allow_localhost                      boolean         false         smtp              1.73
+allow_mx_to_ip                       boolean         false         main              3.14
+allow_symlink                        boolean         false         appendfile
+allow_utf8_domains                   boolean         false         main              4.14
+arc_sign			     string*	     unset	   smtp		     4.91 with Experimental_ARC
+auth_advertise_hosts                 host list       "*"           main              4.00
+authenticated_sender                 string*         unset         smtp              4.14
+authenticated_sender_force           boolean         false         smtp              4.61
+authenticate_hosts                   host list       unset         smtp              3.13
+auto_thaw                            time            0s            main
+av_scanner                           string*         +             main              4.50 with content scan
+batch_id                             string          unset         appendfile        4.00
+                                                     unset         lmtp              4.00
+                                                     unset         pipe              4.00
+batch_max                            integer         100           appendfile
+                                                     100           lmtp              3.20
+                                                     100           pipe
+bcc                                  string*         unset         autoreply
+bi_command                           string          unset         main
+body_only                            boolean         false         transports        2.05
+bounce_message_file                  string*         unset         main              4.00 expanded from 4.94
+bounce_message_text                  string          unset         main              4.00
+bounce_return_body                   boolean         true          main              4.23
+bounce_return_message                boolean         true          main              4.00
+bounce_return_size_limit             int             100K          main              4.23 better name for return_size_limit
+bounce_sender_authentication         string          unset         main              4.00
+callout_domain_negative_expire       time            3h            main              4.11
+callout_domain_positive_expire       time            7d            main              4.11
+callout_negative_expire              time            2h            main              4.11
+callout_positive_expire              time            24h           main              4.11
+callout_random_local_part            string*         +             main              4.11
+cannot_route_message                 string*         unset         routers           4.11
+caseful_local_part                   boolean         false         routers           4.00
+cc                                   string*         unset         autoreply
+check_ancestor                       boolean         false         redirect          4.00
+check_group                          boolean         false         appendfile
+                                                     +             redirect          4.00
+check_local_user                     boolean         false         routers           4.00
+check_log_inodes                     integer         0             main
+check_log_space                      integer         0             main
+check_owner                          boolean         true          appendfile        3.14
+                                                     +             redirect          4.00
+check_rfc2047_length                 boolean         true          main              4.60
+check_secondary_mx                   boolean         false         dnslookup         4.00
+check_spool_inodes                   integer         0             main
+check_spool_space                    integer         0             main
+check_string                         string          "From "       appendfile        3.03
+                                                     unset         pipe              3.03
+check_srv                            string*         unset         dnslookup         4.31
+client_authz                         string*         unset         gsasl             4.94
+client_condition                     string*         unset         authenticators    4.68
+client_ignore_invalid_base64         boolean         false         plaintext         4.61
+client_name                          string*         +             cram_md5          3.10
+client_password                      string*         unset         gsasl             4.94
+client_secret                        string*         unset         cram_md5          3.10
+client_send                          string*         unset         plaintext         3.10
+                                                     unset         external (auth)   4.93
+client_username                      string*         unset         gsasl             4.94
+command                              string*         unset         lmtp              3.20
+                                                     unset         pipe
+                                                     unset         queryprogram      4.00
+command_group                        string          unset         queryprogram      4.00
+command_timeout                      time            5m            smtp
+command_user                         string          unset         queryprogram      4.00
+commandline_checks_require_admin     boolean         false         main              4.90
+condition                            string*         unset         routers           4.00
+connect_timeout                      time            0s            smtp              1.60
+connection_max_messages              integer         500           smtp              4.00 replaces batch_max
+create_directory                     boolean         true          appendfile
+create_file                          string          "anywhere"    appendfile
+current_directory                    string          unset         transports        4.00
+                                                     unset         queryprogram      4.00
+daemon_smtp_ports                    string          unset         main              1.75  pluralised in 4.21
+daemon_startup_retries               int             9             main              4.52
+daemon_startup_sleep                 time            30s           main              4.52
+dane_require_tls_ciphers             string*         unset         smtp              4.91
+data                                 string          unset         redirect          4.00
+data_timeout                         time            5m            smtp
+debug_print                          string*         unset         authenticators    4.00
+                                                     unset         routers           4.00
+                                                     unset         transports        2.00
+debug_store                          boolean         false         main              4.90
+delay_after_cutoff                   boolean         true          smtp
+delay_warning                        time list       24h           main
+delay_warning_condition              string*         +             main              1.73
+deliver_drop_privilege               boolean         false         main              4.00
+deliver_queue_load_max               fixed-point     unset         main              1.70
+delivery_date_add                    boolean         false         transports
+delivery_date_remove                 boolean         true          main
+dkim_canon                           string*         unset         smtp              4.70
+dkim_domain                          string list*    unset         smtp              4.72
+dkim_private_key                     string*         unset         smtp              4.70
+dkim_selector                        string*         unset         smtp              4.70
+dkim_sign_headers                    string*         (RFC4871)     smtp              4.70
+dkim_strict                          string*         unset         smtp              4.70
+dkim_timestamps                      integer*        unset         smtp              4.92
+dkim_verify_hashes                   string          sha256:sha512:sha1 main         4.93
+dkim_verify_keytypes                 string          ed25519:rsa        main         4.93
+dkim_verify_min_keysizes             string list     "rsa=1024 ed25519=250"  main    4.94
+dkim_verify_minimal                  boolean         false              main         4.93
+dkim_verify_signers                  string*         $dkim_signers main              4.70
+directory                            string*         unset         appendfile
+directory_file                       string*         +             appendfile
+directory_mode                       octal-integer   0700          appendfile
+directory_transport                  string*         unset         redirect          4.00
+disable_ipv6                         boolean         false         main              4.61
+disable_logging                      boolean         false         routers           4.11
+                                                     false         transports        4.11
+dmarc_forensic_sender                string          unset         main              4.82 if experimental_dmarc, 4.93 mainline
+dmarc_history_file                   string          unset         main              4.82 if experimental_dmarc, 4.93 mainline
+dmarc_tld_file                       string          unset         main              4.82 if experimental_dmarc, 4.93 mainline
+dns_again_means_nonexist             domain list     unset         main              1.89
+dns_check_names_pattern              string          +             main              2.11
+dns_cname_loops                      integer         0             main              4.92 Set to 9 for older behaviour
+dns_csa_search_limit                 integer         5             main              4.60
+dns_csa_use_reverse                  boolean         true          main              4.60
+dns_dnssec_ok                        integer         -1            main              4.82
+dns_dane_ok                          integer         -1            main              4.83
+dns_ipv4_lookup                      boolean         false         main              3.20
+dns_qualify_single                   boolean         true          smtp
+dns_retrans                          time            0s            main              1.60
+dns_retry                            integer         0             main              1.60
+dns_search_parents                   boolean         false         smtp
+dns_use_edns0                        integer         -1            main              4.76
+domains                              domain list     unset         routers           4.00
+driver                               string          unset         authenticators
+                                                     unset         routers           4.00
+                                                     unset         transports
+drop_cr                              boolean         false         main              4.00 became a no-op in 4.21
+dscp                                 string          unset         smtp              4.82
+dsn_from                             string*         +             main              4.67
+envelope_to_add                      boolean         false         transports
+envelope_to_remove                   boolean         true          main
+environment                          string*         unset         pipe              2.95
+errors_copy                          string list*    unset         main
+errors_reply_to                      string          unset         main
+errors_to                            string*         unset         routers           4.00
+escape_string                        string          ">From "      appendfile        3.03
+                                                     unset         pipe              3.03
+exim_group                           string          ++            main
+exim_path                            string          ++            main
+exim_user                            string          ++            main
+exim_version                         string          ++            main              4.93
+expn                                 boolean         true          routers
+extra_local_interfaces               string          unset         main              4.21
+extract_addresses_remove_arguments   boolean         true          main              1.92
+fail_verify                          boolean         false         routers
+fail_verify_recipient                boolean         false         routers           4.00
+fail_verify_sender                   boolean         false         routers           4.00
+fallback_hosts                       string list     unset         routers           4.00
+                                                     unset         smtp
+file                                 string*         unset         appendfile
+                                                     unset         autoreply
+                                                     unset         redirect          4.00
+file_expand                          boolean         false         autoreply
+file_format                          string          unset         appendfile        3.03
+file_must_exist                      boolean         false         appendfile
+file_optional                        boolean         false         autoreply
+file_transport                       string*         unset         redirect          4.00
+filter_prepend_home                  boolean         true          redirect          4.63
+final_timeout                        time            10m           smtp
+finduser_retries                     integer         0             main
+forbid_blackhole                     boolean         false         redirect          4.00
+forbid_exim_filter                   boolean         false         redirect          4.44
+forbid_fail                          boolean         false         redirect          4.00
+forbid_file                          boolean         false         redirect          4.00
+forbid_filter_existstest             boolean         false         redirect          4.00
+forbid_filter_logwrite               boolean         false         redirect          4.00
+forbid_filter_lookup                 boolean         false         redirect          4.00
+forbid_filter_perl                   boolean         false         redirect          4.00
+forbid_filter_readfile               boolean         false         redirect          4.00
+forbid_filter_readsocket             boolean         false         redirect          4.11
+forbid_filter_reply                  boolean         false         redirect          4.00
+forbid_filter_run                    boolean         false         redirect          4.00
+forbid_include                       boolean         false         redirect          4.00
+forbid_pipe                          boolean         false         redirect          4.00
+forbid_sieve_filter                  boolean         false         redirect          4.44
+forbid_smtp_code                     boolean         false         redirect          4.63
+force_command                        boolean         false         pipe              4.82
+freeze_exec_fail                     boolean         false         pipe              1.89
+freeze_signal                        boolean         false         pipe              4.75
+freeze_tell                          boolean         false         main              4.00 replaces freeze_tell_mailmaster
+from                                 string*         unset         autoreply
+gecos_name                           string*         unset         main
+gecos_pattern                        string          unset         main
+gethostbyname                        boolean         false         smtp
+gnutls_allow_auto_pkcs11             boolean         false         main              4.82
+gnutls_compat_mode                   boolean         unset         main              4.70
+gnutls_require_kx                    string*         unset         main              4.67 deprecated, warns
+                                     string*         unset         smtp              4.67 deprecated, warns
+gnutls_require_mac                   string*         unset         main              4.67 deprecated, warns
+                                     string*         unset         smtp              4.67 deprecated, warns
+gnutls_require_protocols             string*         unset         main              4.67 deprecated, warns
+                                     string*         unset         smtp              4.67 deprecated, warns
+group                                string          +             routers           4.00
+                                                     unset         transports        4.00 replaces local option in some transports
+header_line_maxsize                  integer         0 (unset)     main              4.14
+header_maxsize                       integer         1M            main              4.14
+headers                              string*         unset         autoreply
+headers_add                          string*         unset         routers           4.00
+                                                     unset         transports
+headers_charset                      string          ++            main              4.21
+headers_only                         boolean         false         transports        2.05
+headers_remove                       string*         unset         routers           4.00
+                                                     unset         transports
+headers_rewrite                      string          unset         transports        3.20
+helo_accept_junk_hosts               host list       unset         main              3.00
+helo_allow_chars                     string          ""            main              4.02
+helo_lookup_domains                  domain list     unset         main              4.00
+helo_data                            string*   "$primary_hostname" smtp              3.21
+helo_try_verify_hosts                host list       unset         main              4.00
+helo_verify_hosts                    host list       unset         main              1.73
+hide_child_in_errmsg                                 false         redirect          4.00
+hold_domains                         domain list     unset         main              1.70
+home_directory                       string*         unset         transports        4.00 replaces individual options
+host_all_ignored                     string          "defer"       manualroute       4.67
+host_find_failed                     string          "freeze"      manualroute       4.00
+host_name_extract                    string
+	"${if and {{match{.outlook.com\\$}{$host}} {match{$item}{\\N^250-([\\w.]+)\\s\\N}}} {$1}}"
+								   smtp		     4.96
+host_lookup                          host list       unset         main              3.00
+host_lookup_order                    string list  "bydns:byaddr"   main              4.30
+host_reject_connection               host list       unset         main              4.00
+hosts                                string          unset         iplookup          4.00
+                                     string list*    unset         smtp
+hosts_avoid_esmtp                    host list       unset         smtp              4.21
+hosts_avoid_pipelining               host list       unset         smtp              4.67
+hosts_avoid_tls                      host list       unset         smtp              3.20
+hosts_connection_nolog               host list       unset         main              4.43
+hosts_max_try                        integer         5             smtp              3.20
+hosts_max_try_hardlimit              integer         50            smtp              4.50
+hosts_nopass_tls                     host list       unset         smtp              4.00
+hosts_noproxy_tls                    host list       "*"           smtp              4.90
+hosts_override                       boolean         false         smtp              2.11
+hosts_pipe_connect		     host_list	     unset	   smtp		     4.93 if experimental_pipe_connect
+hosts_randomize                      boolean         false         manualroute       4.00
+                                                     false         smtp              3.14
+hosts_require_auth                   host list       unset         smtp              4.00
+hosts_require_alpn                   host list       unset         main              4.95
+								   smtp              4.95
+hosts_require_dane                   host list       unset         smtp              4.91 (4.85 experimental)
+hosts_require_helo		     host list	     "*"	   main		     4.95
+hosts_require_ocsp                   host list       unset         smtp              4.82 if experimental_ocsp
+hosts_require_tls                    host list       unset         smtp              3.20
+hosts_treat_as_local                 domain list     unset         main              1.95
+hosts_try_auth                       host list       unset         smtp              4.00
+hosts_try_dane                       host list       unset         smtp              4.91 (4.85 experimental)
+hosts_try_fastopen                   host list       unset         smtp              4.88
+hosts_try_prdr                       host list       unset         smtp              4.82 if experimental_prdr
+ibase_servers                        string          unset         main              4.23
+ignore_bounce_errors_after           time            0s            main              4.00
+ignore_eacces                        boolean         false         redirect          4.00
+ignore_enotdir                       boolean         false         redirect          4.00
+ignore_fromline_hosts                host list       unset         main
+ignore_fromline_local                boolean         false         main              2.05
+ignore_status                        boolean         false         pipe
+ignore_target_hosts                  host list       unset         routers           4.00
+include_directory                    string          unset         redirect          4.00
+initgroups                                           false         routers           4.00
+interface                            string list     unset         smtp              1.70
+keep_malformed                       time            4d            main
+keepalive                            boolean         true          smtp              2.05
+ldap_default_servers                 string list     unset         main              3.02
+ldap_version                         int             2 or 3        main              4.14
+local_from_check                     boolean         true          main              3.14
+local_from_prefix                    string          unset         main              3.14
+local_from_suffix                    string          unset         main              3.14
+local_interfaces                     string list     unset         main              1.60
+local_part_prefix                    string          unset         routers           4.00 replaces prefix
+local_part_prefix_optional           boolean         unset         routers           4.00 replaces prefix_optional
+local_part_suffix                    string          unset         routers           4.00 replaces suffix
+local_part_suffix_optional           boolean         unset         routers           4.00 replaces suffix_optional
+local_parts                          string list*    unset         routers           4.00
+local_scan_timeout                   time            5m            main              4.03
+local_sender_retain                  boolean         false         main              4.00
+localhost_number                     string          unset         main
+lock_fcntl_timeout                   time            0s            appendfile        3.14
+lock_flock_timeout                   time            0s            appendfile        4.11
+lock_interval                        time            3s            appendfile
+lock_retries                         integer         10            appendfile
+lockfile_mode                        octal-integer   0600          appendfile
+lockfile_timeout                     time            30m           appendfile
+log                                  string*         unset         autoreply
+log_as_local                         boolean         +             routers           4.00
+log_file_path                        string list     ++            main
+log_defer_output                     boolean         false         pipe              1.89
+log_fail_output                      boolean         false         pipe              1.60
+log_output                           boolean         false         pipe              1.60
+log_selector                         string          unset         main              4.00
+log_timezone                         boolean         false         main              4.11
+lookup_open_max                      integer         25            main              2.05
+mailbox_filecount                    string*         unset         appendfile        4.43
+mailbox_size                         string*         unset         appendfile        4.43
+maildir_format                       boolean         false         appendfile        1.70
+maildir_retries                      integer         10            appendfile        1.70
+maildir_tag                          string*         unset         appendfile        1.92
+maildir_use_size_file                boolean*        false         appendfile        4.30 expanded in 4.77
+maildirfolder_create_regex           string          unset         appendfile        4.62
+mailstore_format                     boolean         false         appendfile        2.00
+mailstore_prefix                     string*         unset         appendfile        2.00
+mailstore_suffix                     string*         unset         appendfile        2.00
+match_directory                      string*         unset         localuser
+max_output                           integer         20K           pipe
+max_rcpt                             integer         100           smtp              1.60
+max_user_name_length                 integer         0             main
+mbx_format                           boolean         false         appendfile        2.10
+message_body_newlines                boolean         false         main              4.68
+message_body_visible                 integer         500           main
+message_id_header_domain             string*         unset         main              4.11
+message_id_header_text               string*         unset         main
+message_linelength_limit             integer         998           smtp              4.94
+message_logs                         boolean         true          main              4.10
+message_prefix                       string*         +             appendfile        4.00 replaces prefix
+                                     string*         unset         pipe              4.00 replaces prefix
+message_size_limit                   integer         50M           main
+                                                     0             transports        2.05
+message_suffix                       string*         +             appendfile        4.00 replaces suffix
+                                     string*         unset         pipe              4.00 replaces suffix
+mode                                 octal-integer   0600          appendfile
+                                                     0600          autoreply
+mode_fail_narrower                   boolean         true          appendfile        1.70
+modemask                             octal-integer   022           redirect          4.00
+more                                 boolean         true          routers           4.00
+move_frozen_messages                 boolean         false         main              3.09
+multi_domain                         boolean         true          smtp
+mx_domains                           domain list     unset         dnslookup         4.00
+mx_fail_domains                      domain list     unset         dnslookup         4.43
+mysql_servers                        string list     unset         main              3.03
+never_users                          string list     unset         main
+notifier_socket			     string	     "$spool_directory/exim_daemon_notify"
+								   main		     4.94
+notify_comsat                        boolean         false         appendfile
+once                                 string*         unset         autoreply
+once_file_size                       integer         0             autoreply         3.20
+once_repeat                          time            0s            autoreply         2.95
+one_time                             boolean         false         redirect          4.00
+openssl_options                      string          +no_sslv2     main              4.73 default changed in 4.80
+optional                             boolean         false         iplookup          4.00
+oracle_servers                       string          unset         main              4.00
+owners                               string list     unset         redirect          4.00
+owngroups                            string list     unset         redirect          4.00
+pass_on_timeout                      boolean         false         routers           4.00
+pass_router                          string          unset         routers           4.00
+path                                 string          "/usr/bin"    pipe
+percent_hack_domains                 domain list     unset         main
+perl_at_start                        boolean         false         main              2.10
+perl_startup                         string          unset         main              2.10
+permit_coredump                      boolean         false         pipe              4.73
+pgsql_servers                        string list     unset         main              3.14
+pid_file_path                        string          ++            main
+pipe_as_creator                      boolean         false         pipe
+pipe_transport                       string*         unset         redirect          4.00
+pipelining_advertise_hosts           host list       "*"           main              4.14
+pipelining__connect_advertise_hosts  host list       "*"           main              4.92 if experimental_pipe_connect
+port                                 integer         0             iplookup          4.00
+                                     string          "smtp"        smtp
+preserve_message_logs                boolean         false         main
+prdr_enable                          boolean         false         main              4.82 if experimental_prdr
+primary_hostname                     string          +             main
+print_topbitchars                    boolean         false         main              1.89
+process_log_path                     string          unset         main              4.21
+prod_requires_admin                  boolean         true          main              1.70
+protocol                             string          "udp"         iplookup          4.00
+                                     string          "smtp"        smtp              3.20
+public_name                          string          unset         authenticators    3.10
+qualify_domain                       string          +             main
+                                     string*         unset         redirect          4.31
+qualify_preserve_domain              boolean         false         redirect          4.00
+qualify_recipient                    string          +             main
+qualify_single                       boolean         true          dnslookup         4.00
+query                                string*         +             iplookup          4.00
+queue_domains                        domain list     unset         main              4.00
+queue_fast_ramp                      boolean         false         main              4.95
+queue_list_requires_admin            boolean         true          main              1.95
+queue_only                           boolean         false         main
+queue_only_file                      string          unset         main              2.05
+queue_only_load                      fixed-point     unset         main
+queue_only_load_latch                boolean         true          main              4.68
+queue_only_override                  boolean         true          main              4.21
+queue_run_in_order                   boolean         false         main              1.70
+queue_run_max                        integer         5             main
+queue_smtp_domains                   domain list     unset         main
+quota                                string*         unset         appendfile        1.60
+quota_directory                      string*         unset         appendfile        4.11
+quota_filecount                      integer         0             appendfile        2.05
+quota_is_inclusive                   boolean         true          appendfile        3.20
+quota_size_regex                     string          unset         appendfile        3.14
+quota_warn_message                   string*         +             appendfile        2.10
+quota_warn_threshold                 string*         0             appendfile        2.10
+rcpt_include_affixes                 boolean         false         transports        4.21
+receive_timeout                      time            0s            main              4.00 replacing accept_timeout
+received_header_text                 string*         +             main
+received_headers_max                 integer         30            main
+recipient_unqualified_hosts          host list       unset         main              4.00 replacing receiver_unqualified_hosts
+recipients_max                       integer         50000         main              1.60 default changed in 4.95 (was 0)
+recipients_max_reject                boolean         false         main              1.70
+redirect_router                      string          unset         routers           4.00
+remote_max_parallel                  integer         1             main
+remote_sort_domains                  domain list     unset         main              4.00 replacing remote_sort
+repeat_use                           boolean         true          redirect          4.00
+reply_to                             string*         unset         autoreply         2.05
+reply_transport                      string*         unset         redirect          4.00
+require_files                        string list*    unset         routers           4.00
+reroute                              string*         unset         iplookup          4.00
+response_pattern                     string          unset         iplookup          4.00
+restrict_to_path                     boolean         false         pipe
+retry_data_expire                    time            7d            main              3.03
+retry_include_ip_address             boolean         true          smtp              1.92
+retry_interval_max                   time            24h           main
+retry_use_local_part                 boolean         +             routers           4.00
+                                                     +             transports        4.00 replacing individual options
+return_fail_output                   boolean         false         pipe              1.60
+return_message                       boolean         false         autoreply
+return_output                        boolean         false         pipe
+return_path                          string*         unset         transports        2.05
+return_path_add                      boolean         false         transports
+return_path_remove                   boolean         true          main
+return_size_limit                    integer         100K          main                   renamed bounce_return_size_limit in 4.23
+rewrite                              boolean         true          redirect          4.00
+rewrite_headers                      boolean         true          dnslookup         4.00
+rfc1413_hosts                        host list       *             main
+rfc1413_query_timeout                time            5s            main
+router_home_directory                string*         unset         routers           4.11
+route_data                           string*         unset         manualroute       4.00
+route_list                           string list     unset         manualroute       4.00
+same_domain_copy_routing             boolean         false         dnslookup         4.00
+search_parents                       boolean         false         dnslookup         4.00
+self                                 string          "freeze"      routers           4.00
+sender_unqualified_hosts             host list       unset         main
+senders                              address list    unset         routers           4.00
+serialize_hosts                      host list       unset         smtp              1.60
+server_advertise_condition           string*         unset         authenticators    4.14
+server_channelbinding                bool            false         gsasl             4.80
+server_condition                     string*         unset         authenticators    3.10 (plaintext) 4.64 (others)
+server_hostname                      string*   "$primary_hostname" cyrus_sasl,gsasl,heimdal_gssapi (cyrus-only) 4.80 (others)
+server_keytab                        string*         unset         heimdal_gssapi    4.80
+server_mail_auth_condition           string*         unset         authenticators    3.22
+server_mech                          string          public_name   cyrus_sasl,gsasl  4.43 (cyrus-only) 4.80 (others)
+server_password                      string          unset         gsasl             4.80
+server_param1			     string*	     unset	   tls (auth)	     4.86
+server_param2			     string*	     unset	   tls (auth)	     4.86
+server_param3			     string*	     unset	   tls (auth)	     4.86
+server_param2			     string*	     unset	   tls (auth)	     4.86 (tls-only) 4.93 (external)
+server_param3			     string*	     unset	   tls (auth)	     4.86 (tls-only) 4.93 (external)
+server_prompts                       string*         unset         plaintext         3.10
+server_realm                         string          unset         cyrus_sasl,gsasl  4.43 (cyrus-only) 4.80 (others)
+server_scram_iter                    string*         unset         gsasl             4.80
+server_scram_salt                    string*         unset         gsasl             4.80
+server_secret                        string*         unset         cram_md5          3.10
+server_service                       string          "smtp"  cyrus_sasl,gsasl,heimdal_gssapi  (cyrus-only) 4.80 (others)
+server_set_id                        string*         unset         authenticators    3.10
+set				     string*	     unset	   routers	     4.93
+shadow_condition                     string*         unset         transports
+shadow_transport                     string          unset         transports
+size_addition                        integer         1024          smtp              1.91
+skip_syntax_errors                   boolean         false         redirect          4.00
+smtp_accept_keepalive                boolean         true          main
+smtp_accept_max                      integer         20            main
+smtp_accept_max_nonmail              integer         10            main              4.11
+smtp_accept_max_nonmail_hosts        host list       *             main              4.14
+smtp_accept_max_per_connection       integer         1000          main              4.00
+smtp_accept_max_per_host             integer         0             main              2.05
+smtp_accept_queue                    integer         0             main
+smtp_accept_queue_per_connection     integer         10            main              2.03
+smtp_accept_reserve                  integer         0             main
+smtp_active_hostname                 string*         unset         main              4.33
+smtp_backlog_monitor                 integer         0             main              4.95
+smtp_banner                          string*         +             main
+smtp_check_spool_space               boolean         true          main              2.10
+smtp_connect_backlog                 integer         5             main
+smtp_enforce_sync                    boolean         true          main              4.00
+smtp_etrn_command                    string*         unset         main              1.92
+smtp_etrn_serialize                  boolean         true          main              1.89
+smtp_load_reserve                    fixed-point     unset         main
+smtp_max_synprot_errors              integer         3             main              4.30
+smtp_max_unknown_commands            integer         3             main              4.14
+smtp_ratelimit_hosts                 host list       unset         main              4.00
+smtp_ratelimit_mail                  string          unset         main              4.00
+smtp_ratelimit_rcpt                  string          unset         main              4.00
+smtp_receive_timeout                 time            5m            main
+smtp_reserve_hosts                   host list       unset         main
+smtp_return_error_details            boolean         false         main              4.11
+socket                               string*         unset         lmtp              4.11
+spamd_address                        string*         +             main              4.50 with content scan
+spf_guess			     string          "v=spf1 a/24 mx/24 ptr ?all"
+								   main		     4.91 with SUPPORT_SPF
+spf_smtp_comment_template	     string*	     "Please see http://www.open-spf.org/Why"
+								   main		     4.94 with SUPPORT_SPF
+split_spool_directory                boolean         false         main              1.70
+spool_directory                      string          ++            main
+spool_wireformat                     boolean         false         main              4.90
+sqlite_dbfile                        string*         unset         main              4.94 with LOOKUP_SQLITE
+sqlite_lock_timeout                  time            5s            main              4.53
+strict_acl_vars                      boolean         false         main              4.64
+srv_fail_domains                     domain list     unset         dnslookup         4.43
+strip_excess_angle_brackets          boolean         false         main
+strip_trailing_dot                   boolean         false         main
+subject                              string*         unset         autoreply
+syntax_errors_text                   string*         unset         redirect          4.00
+syntax_errors_to                     string          unset         redirect          4.00
+syslog_duplication                   boolean         true          main              4.21
+syslog_facility                      string          unset         main              4.20
+syslog_processname                   string          "exim"        main              4.20
+syslog_timestamp                     boolean         true          main              4.00
+system_filter                        string          unset         main              4.00 replacing message_filter
+system_filter_directory_transport    string          unset         main              4.00 replacing message_filter
+system_filter_file_transport         string          unset         main              4.00 replacing message_filter
+system_filter_group                  string          unset         main              4.00 replacing message_filter
+system_filter_pipe_transport         string          unset         main              4.00 replacing message_filter
+system_filter_reply_transport        string          unset         main              4.00 replacing message_filter
+system_filter_user                   string          unset         main              4.00 replacing message_filter
+tcp_nodelay                          boolean         true          main              4.23
+                                                     true          smtp              4.23
+tcp_wrappers_daemon_name             string*         ++            main              4.73
+temp_errors                          string list     +             pipe              1.95
+text                                 string*         unset         autoreply
+timeout                              time            5m            lmtp              3.20
+                                                     1h            pipe
+                                                     1h            queryprogram      4.00
+                                                     5s            iplookup          4.00
+timeout_defer                        boolean         false         pipe              4.51
+timeout_frozen_after                 time            0s            main              3.20
+timezone                             string          +             main              3.15
+tls_advertise_hosts                  host list       *             main              3.20
+tls_alpn			     string*	     unset	   main		     4.95
+								   smtp		     4.95
+tls_certificate                      string*         unset         main              3.20
+                                                     unset         smtp              3.20
+tls_dh_max_bits                      integer         2236          main              4.80
+tls_dh_min_bits                      integer         1024          smtp              4.82
+tls_dhparam                          string*         unset         main              3.20
+tls_ocsp_file                        string*         unset         main              4.80 if experimental_ocsp
+tls_on_connect_ports                 string          unset         main              4.43
+tls_privatekey                       string*         unset         main              3.20
+                                                     unset         smtp              3.20
+tls_remember_emstp                   boolean         false         main              4.21
+tls_require_ciphers                  string*         unset         smtp              4.00 replaces tls_verify_ciphers
+                                     string*         unset         main              4.33
+tls_resumption_hosts                 host list*      unset         main              4.95
+                                     host list*      unset         smtp              4.95
+tls_sni                              string*         unset         main              4.80
+tls_tempfail_tryclear                boolean         true          smtp              4.05
+tls_try_verify_hosts                 host list       unset         main              4.00
+tls_verify_certificates              string*         unset         main              3.20
+                                                     unset         smtp              3.20
+tls_verify_hosts                     host list       unset         main              3.20
+to                                   string*         unset         autoreply
+translate_ip_address                 string          unset         routers           4.00
+transport                            string*         unset         routers           4.00
+transport_current_directory          string          unset         routers           4.00
+transport_home_directory             string          unset         routers           4.00
+transport_filter                     string          unset         transports
+transport_filter_timeout             time            5m            transports        4.30
+trusted_groups                       string list     unset         main
+trusted_users                        string list     unset         main
+umask                                octal-integer   022           pipe
+unknown_login                        string          unset         main
+unknown_username                     string          unset         main
+unseen                               boolean         false         routers           4.00
+untrusted_set_sender                 boolean         false         main              3.20
+use_bsmtp                            boolean         false         appendfile        4.00
+                                                     false         pipe              4.00
+use_crlf                             boolean         false         appendfile        1.89
+                                                     false         pipe              1.89
+use_fcntl_lock                       boolean         +             appendfile        1.70
+use_flock_lock                       boolean         +             appendfile        4.11
+use_lockfile                         boolean         +             appendfile
+use_mbx_lock                         boolean         +             appendfile        2.10
+use_shell                            boolean         false         pipe              1.70
+user                                 string          +             routers           4.00
+                                                     unset         transports        4.00 replaces individual options
+utf8_downconvert                     integer         unset         smtp              4.92 if SUPPORT_I18N
+uucp_from_pattern                    string          +             main              1.75
+uucp_from_sender                     string*         "$1"          main              1.75
+verify                               boolean         true          routers           4.00
+verify_only                          boolean         false         routers           4.00
+verify_recipient                     boolean         true          routers           4.00
+verify_sender                        boolean         true          routers           4.00
+warn_message_file                    string*         unset         main              4.00 expanded from 4.94
+widen_domains                        string list     unset         dnslookup         4.00
+write_rejectlog                      boolean         true          main              4.31
+
+
+
+2. COMMAND LINE OPTIONS
+-----------------------
+
+The table below contains a complete list of all Exim's command line options.
+Those marked with # are available only to trusted users, those marked with +
+are available only to admin users, and those marked with * exist only to
+provide compatibility with Sendmail.
+
+--               Terminate options
+--help           Give a little help (not a lot)
+--version        Give version information (alias for -bV)
+-B             * Ignored
+-bd            + Start daemon
+-bdf           + Start daemon and run it in the foreground
+-be              Test string expansion
+-bem             Test string expansion, read test message first
+-bF              Test system filter file
+-bf              Test user filter file
+-bfd             Set domain for filter testing
+-bfl             Set local part for filter testing
+-bfp             Set local part prefix for filter testing
+-bfs             Set local part suffix for filter testing
+-bh              Test incoming SMTP call, omitting callouts
+-bhc             Test incoming SMTP call, with callouts
+-bi            * Run <command>bi_command</command>
+-bI:help         Show list of accepted -bI:<tag> options
+-bm              Accept message on standard input
+-bmalware      + Invoke configured malware scanning against supplied filename
+-bnq             Don't qualify addresses in locally submitted messages
+-bP              Show configuration option settings
+-bp            + List the queue
+-bpa           + ... with generated addresses as well
+-bpc           + ... but just show a count of messages
+-bpr           + ... do not sort
+-bpra          + ... with generated addresses, unsorted
+-bpru          + ... only undelivered addresses, unsorted
+-bpu           + ... only undelivered addresses
+-brt             Test retry rules
+-brw             Test rewriting rules
+-bS              Read batch SMTP on standard input
+-bs              Run SMTP on standard input and output
+-bt              Test address directing and routing
+-bV              Verify version number
+-bv              Test recipient address verification
+-bvs             Test sender address verification
+-bw            + Inetd wait mode
+-C             + Use alternate configuration file
+-D             + Define macro for configuration file
+-d             + Turn on debugging output
+-dd            + Ditto, but if a daemon, not for subprocesses
+-dropcr          Remove CR character in input: became a no-op in 4.21
+-E               Internal use only
+-ex            * Synonym for -oex (for several different x)
+-F               Set calling user name
+-f             # Set calling user address
+-G             * Ignored
+-h             * Ignored
+-i               Dot does not terminate message
+-M             + Force deliver specific message
+-Mar           + Add recipient to message
+-MC              Internal use only
+-MCA             Internal use only
+-MCP             Internal use only
+-MCQ             Internal use only
+-MCS             Internal use only
+-MCT             Internal use only
+-Mc            + Deliver specific message
+-Mes           + Edit message sender
+-Mf            + Freeze message(s)
+-Mg            + Give up (bounce) message(s)
+-Mmad          + Mark all recipients delivered
+-Mmd           + Mark one recipient delivered
+-Mrm           + Remove message(s) (no bounce)
+-Mset          + Load message's variables when testing with -be
+-Mt            + Thaw message(s)
+-Mvb           + View message body
+-Mvc           + View entire message in RFC 2822 format
+-Mvh           + View message header
+-Mvl           + View message log
+-m             * Ignored
+-N             + Deliver without transporting
+-n             * Ignored
+-O             * Ignored
+-oA            * Supply argument for <option>-bi</option>
+-oB              Set max messages down one connection
+-odb             Background delivery
+-odf             Foreground delivery
+-odi             Foreground delivery
+-odq             Queue message; do not deliver
+-odqs            ... do not do SMTP deliveries
+-oee             Error sent by mail; zero return code
+-oem             Error sent by mail; non-zero return code
+-oep             Error written to standard error stream
+-oeq           * Error written to standard error stream
+-oew           * Error sent by mail; non-zero return code
+-oi              Dot does not terminate message
+-oitrue        * Dot does not terminate message
+-oMa           # Supply host address
+-oMaa          # Supply authenticator name
+-oMai          # Supply authenticated id
+-oMas          # Supply authenticated sender
+-oMi           # Supply interface address
+-oMm           # Supply message reference
+-oMr           # Supply protocol name
+-oMs           # Supply host name
+-oMt           # Supply ident string
+-om            * Ignored
+-oo            * Ignored
+-oP            * Specify path for daemon's pid file
+-or              Timeout non-SMTP messages
+-os              Timeout for SMTP messages
+-ov            * Verbose; same as -v
+-oX              Alternative port for daemon
+-pd              Delay Perl interpreter start
+-ps              Do not delay Perl interpreter start
+-p<r>:<s>      * Same as -oMr <r> -oMs <s>
+-q             + Run the queue                    )
+-qf            + ... force delivery               ) Other combinations are
+-qff           + ... and include frozen messages  ) possible. The syntax is
+-qi            + ... initial deliveries only      )
+-ql            + ... local deliveries only        )   -q[q][f][f][i|l][time]
+-qq            + Two-stage queue run              )
+-qR            * Same as -R
+-qS            * Same as -S
+-R               Select by recipient in queue run
+-Rf              ... with forcing
+-Rff             ... and frozen messages
+-Rr              ... using regular expression
+-Rrf             ... with forcing
+-Rrff            ... and frozen messages
+-r             * Synonym for -f
+-S               Select by sender in queue run
+-Sf              ... with forcing
+-Sff             ... and frozen messages
+-Sr              ... using regular expression
+-Srf             ... with forcing
+-Srff            ... and frozen messages
+-Tqt           * Used by Exim test suite; not recognized in normal use
+-t               Take recipients from header lines
+-ti            * Same as -t -i
+-tls-on-connect  Do TLS on startup (for legacy clients)
+-U             * Ignored
+-v               Verbose - shows SMTP dialogue and other delivery info
+-x               Ignored (AIX compatibility)
+
+
+3. BUILD TIME OPTIONS FOR EXIM
+------------------------------
+
+The table below contains a "mostly" complete list of options that can be
+set in Local/Makefile when building Exim.  The only items not included are
+those whose names can be trivially derived from rules stated below.
+
+More information about individual options can be found in src/EDITME and
+OS/Makefile-Default.
+
+The second column below gives the type of option:
+
+ . `system' means the option is concerned with the operating system;
+
+ . `driver' means the option selects a driver to be included in the binary;
+
+ . `lookup' means the option selects a lookuptype to be included in the binary;
+
+ . `mandatory' means the option is required to be supplied;
+
+ . `recommended' means the option is recommended to be supplied;
+
+ . `optional' means what it says;
+
+Those marked with * are specialized and are unlikely to be required in most
+installations. Those that are marked with ** are commonly set in OS-specific
+Makefiles. If you use any of these in your Local/Makefile, you may need to
+reproduce some of the OS-specific settings. For example, in the Makefile for
+Solaris (which is actually called OS/Makefile-SunOS5), there is
+
+  LIBS=-lsocket -lnsl -lkstat
+
+If you use LIBS to add extra libraries, you must also include the OS ones in
+your setting. It is better, in this particular case, to use EXTRALIBS, which is
+empty by default, and is provided for just this reason. Of course, if you do
+actually want to modify a setting from the OS-specific file, there is nothing
+to stop you overriding it in your Local/Makefile.
+
+When building Exim with dynamically loaded lookup support, for "LOOKUP_FOO",
+you can define "LOOKUP_FOO_INCLUDE" and "LOOKUP_FOO_LIBS", for includes and
+libraries specific only to that module.  These rules are only used where the
+relevant lookup is a module.  These options are not explicitly listed below.
+
+Variables with names endined `_PC' are used for pkg-config integration; setting
+the value to the name of a pkg-config package will cause Exim's build system to
+query the --cflags and --libs for the given name, when building anything
+dependent upon the component associated with the `_PC' variable.  For lookups,
+if the lookup is dynamically loaded, then this *replaces* the use of the
+corresponding _INCLUDE and _LIBS options, which will be ignored.  If the lookup
+is statically loaded into Exim, the results will be inserted into the
+"LOOKUP_INCLUDE" and "LOOKUP_LIBS" options.  For authenticator, the results
+will be inserted into the "CFLAGS" and "AUTH_LIBS" options.  These options are
+only listed below for the TLS implementation cases.
+
+
+Option                       Type         Description
+------------------------------------------------------------------------------
+
+ALT_CONFIG_PREFIX            optional     restricts location of -C files
+APPENDFILE_MODE              optional*
+APPENDFILE_DIRECTORY_MODE    optional*
+APPENDFILE_LOCKFILE_MODE     optional*
+AR                           system       command to build a library
+AUTH_CRAM_MD5                driver       include cram_md5 authenticator
+AUTH_CYRUS_SASL              driver       include Cyrus SASL authenticator
+AUTH_GSASL                   driver       include GNU SASL authenticator
+AUTH_HEIMDAL_GSSAPI          driver       include Heimdal GSSAPI authenticator
+AUTH_LIBS                    system       library linkage for authenticators
+AUTH_PLAINTEXT               driver       include plaintext authenticator
+AUTH_SPA                     driver       include SPA (NTLM) authenticator
+AUTH_VARS=3                  optional*    number of $auth variables
+BASENAME_COMMAND             system**     path to basename
+BASE_62=62                   optional*    not normally changed for Unix
+BIN_DIRECTORY                mandatory    Exim binary directory
+CC                           system**     C compiler
+CFLAGS                       system**     flags for C compiler
+CFLAGS_DYNAMIC               system**     extra flags needed for .so modules
+CHGRP_COMMAND                system**     path to chgrp
+CHOWN_COMMAND                system**     path to chown
+COMPRESS_COMMAND             system       path to a compress command
+COMPRESS_SUFFIX              system       suffix added to compressed files
+CONFIGURE_FILE               mandatory    Exim runtime configuration file
+CONFIGURE_FILE_USE_EUID      optional*
+CONFIGURE_FILE_USE_NODE      optional*
+CONFIGURE_GROUP              optional*    alternate group for configuration file
+CONFIGURE_OWNER              optional*    alternate owner for configuration file
+CYRUS_PWCHECK_SOCKET         optional     socket for pwcheck daemon
+DBMLIB                       optional**   location of DBM library
+DB_DIRECTORY_MODE            optional*    mode for hints directory
+DB_LOCKFILE_MODE             optional*    mode for hints lock files
+DB_LOCK_TIMEOUT              optional*    timeout for hints lock files
+DB_MODE                      optional*    mode for hints files
+DEFAULT_CRYPT                optional     default crypt() function
+DELIVER_IN_BUFFER_SIZE       optional*
+DELIVER_OUT_BUFFER_SIZE      optional*
+DISABLE_DKIM                 optional     disables DKIM support
+DISABLE_DNSSEC               optional     disables attempts to use DNSSEC
+DISABLE_D_OPTION             optional     disables -D option
+ERRNO_QUOTA                  optional*    error code for system quota failures
+EXICYCLOG_MAX                optional     number of old log files to keep
+EXIMDB_DIRECTORY_MODE        optional*    for hints database directory
+EXIMDB_LOCKFILE_MODE         optional*    for hints lock files
+EXIMDB_MODE                  optional*    mode for hints files
+EXIMON_TEXTPOP               system**
+EXIM_CHMOD                   optional*
+EXIM_GROUP                   mandatory    group to use for Exim
+EXIM_MONITOR                 optional     set to eximon.bin to compile
+EXIM_PERL                    optional
+EXIM_USER                    mandatory    user to use for Exim
+EXIWHAT_EGREP_ARG            system**     to find Exim processes from ps
+EXIWHAT_KILL_SIGNAL          system**     -SIGUSR1 or numerical equivalent
+EXIWHAT_MULTIKILL_CMD        system**
+EXIWHAT_MULTIKILL_ARG        system**
+EXIWHAT_PS_ARG               system**     to list all processes
+EXIWHAT_PS_CMD               system**     path to ps command
+EXPAND_LISTMATCH_RHS         optional*    restore pre-4.77 match_*{}{} behaviour
+EXTRALIBS                    system       additional libraries
+EXTRALIBS_EXIM               system       additional libraries for Exim only
+EXTRALIBS_EXIMON             system       additional libraries for the monitor
+FIXED_NEVER_USERS            optional     can't override at runtime
+HAVE_ICONV                   system       the iconv() function is available
+HAVE_IPV6                    system       include IPv6 support
+HEADERS_CHARSET              optional     charset for decoded header lines
+HEADER_ADD_BUFFER_SIZE       optional*    buffer for header_add()
+HEADER_MAXSIZE               optional*    max memory for message header
+HOSTNAME_COMMAND             system**     path to hostname command
+INCLUDE                      system       path to include files
+INFO_DIRECTORY               optional     directory for Info documentation
+INPUT_DIRECTORY_MODE         optional     mode for input directory
+IPV6_INCLUDE                 system       additional includes for IPv6
+IPV6_LIBS                    system       additional libraries for IPv6
+LDAP_LIB_TYPE                optional     type of LDAP library
+LFLAGS                       system**     link editor flags
+LIBIDENTCFLAGS               system       C flags when compiling libident
+LIBIDENTNAME                 system       name for libident library
+LIBRESOLV                    system**     library for DNS resolver
+LIBS                         system**     additional libraries
+LIBS_EXIM                    system**     additional libraries for Exim ony
+LIBS_EXIMON                  system**     additional libraries for monitor
+LOCAL_SCAN_SOURCE            optional     location of local_scan() source
+LOG_DIRECTORY_MODE           optional     mode for log directory
+LOG_FILE_PATH                optional     path to log files
+LOG_MODE                     optional     mode for log files
+LOOKUP_CDB                   lookup       include cdb lookup
+LOOKUP_DBM                   lookup       include dbm lookup
+LOOKUP_DNSDB                 lookup       include dnsdb lookup
+LOOKUP_DSEARCH               lookup       include dsearch lookup
+LOOKUP_INCLUDE               lookup       include files for lookups
+LOOKUP_LDAP                  lookup       include ldap lookup
+LOOKUP_LIBS                  lookup       include libraries for lookups
+LOOKUP_LSEARCH               lookup       include all lsearch lookups
+LOOKUP_MODULE_DIR            optional*    where dynamic lookup modules live
+LOOKUP_MYSQL                 lookup       include mysql lookup
+LOOKUP_NIS                   lookup       include nis lookup
+LOOKUP_NISPLUS               lookup       include nisplus lookup
+LOOKUP_ORACLE                lookup       include oracle lookup
+LOOKUP_PGSQL                 lookup       include pgsql lookup
+LOOKUP_TESTDB                lookup*
+LOOKUP_WHOSON                lookup       include whoson lookup
+LOOKUP_*_INCLUDE             optional*    include files for dynamic module
+LOOKUP_*_LIBS                optional*    libraries for dynamic module
+MAKE_SHELL                   optional*    shell to use for make
+MAX_FILTER_SIZE              optional*    max file size for filter files
+MAX_INCLUDE_SIZE             optional*    max file size for :include: files
+MAX_LOCALHOST_NUMBER=256     optional*    for when localhost_number is set
+MAX_NAMED_LIST               optional*    max named lists of a given type
+MAX_INTERFACES               system       maximum network interfaces
+MSGLOG_DIRECTORY_MODE        optional*    mode for message log directory
+MV_COMMAND                   system       path to mv command
+NO_SYMLINK                   optional     install doesn't make 'exim" symlink
+PCRE_CONFIG                  system*      use pcre-config for PCRE support
+PCRE_LIBS                    system*      library for using PCRE
+PERL_CC                      system*      compiler for Perl interface code
+PERL_CCOPTS                  system*      flags for same
+PERL_COMMAND                 system       path to Perl
+PERL_LIBS                    system*      library for compiling Perl interface
+PID_FILE_PATH                optional     path to daemon's pid file
+RADIUS_CONFIG_FILE           optional     path to Radius config file
+RADIUS_LIB_TYPE              optional     type of RADIUS library
+RANLIB                       system**     path to ranlib command
+RM_COMMAND                   system       path to rm command
+ROUTER_ACCEPT                driver       include accept router
+ROUTER_DNSLOOKUP             driver       include dnslookup router
+ROUTER_MANUALROUTE           driver       include manualroute router
+ROUTER_IPLITERAL             driver       include ipliteral router
+ROUTER_IPLOOKUP              driver       include iplookup router
+ROUTER_REDIRECT              driver       include redirect router
+ROUTER_QUERYPROGRAM          driver       include queryprogram router
+SPOOL_DIRECTORY              recommended  path to spool directory
+SPOOL_DIRECTORY_MODE         optional     mode of spool directory
+SPOOL_MODE                   optional     mode of spool files
+STRING_SPRINTF_BUFFER_SIZE   optional*    buffer for string_sprintf()
+STRIP_COMMAND                optional*    can be used to strp binaries
+SUPPORT_A6                   optional*    support A6 DNS records
+SUPPORT_CRYPTEQ              optional     support crypteq (if no auths)
+SUPPORT_MAILDIR              optional     support for maildir delivery
+SUPPORT_MAILSTORE            optional     support for mailstore delivery
+SUPPORT_MBX                  optional     support for MBX delivery
+SUPPORT_MOVE_FROZEN_MESSAGES optional*    support for frozen message moving
+SUPPORT_PAM                  optional     support for PAM authentication
+SUPPORT_TLS                  optional     support for TLS encryption over SMTP
+SUPPORT_TRANSLATE_IP_ADDRESS optional*    support for address translation
+SYSLOG_LOG_PID               optional     add pid to syslog lines
+SYSLOG_LONG_LINES            optional     do not split long syslog lines
+SYSTEM_ALIASES_FILE          optional     defaults to /etc/aliases
+TCP_WRAPPERS_DAEMON_NAME     system*      daemon name used by tcpwrappers library
+TIMEZONE_DEFAULT             optional     default for timezone option
+TLS_INCLUDE                  optional     path to include files for TLS
+TLS_LIBS                     optional     additional libraries for TLS
+EXIM_TMPDIR                  system       value for TMPDIR environment variable
+TRANSPORT_APPENDFILE         driver       include appendfile transport
+TRANSPORT_AUTOREPLY          driver       include autoreply transport
+TRANSPORT_LMTP               driver       include lmtp transport
+TRANSPORT_PIPE               driver       include pipe transport
+TRANSPORT_SMTP               driver       include smtp transport
+TRUSTED_CONFIG_LIST          optional     config files safe to retain privileges
+USE_DB                       system**     use native DB interface
+USE_GNUTLS                   optional     use GnuTLS instead of OpenSSL
+USE_GNUTLS_PC                optional     probably "gnutls"
+USE_OPENSSL_PC               optional     probably "openssl"
+USE_READLINE                 optional     try to load libreadline for -be
+USE_TCP_WRAPPERS             system       link with tcpwrappers
+USE_TDB                      optional     use the tdb DB interface
+WHITELIST_D_MACROS           optional     -Dmacros safe to retain privileges with
+WITH_OLD_CLAMAV_STREAM       optional*    use ClamAV API from before ClamAV 0.95
+X11                          system**     X11 base directory
+X11_LD_LIB                   system**     X11 link library
+XINCLUDE                     system**     X11 include directory
+XLFLAGS                      system**     X11 link time flags
+ZCAT_COMMAND                 system       path to zcat command
+
+
+4. BUILD TIME OPTIONS FOR EXIMON
+--------------------------------
+
+The table below contains a complete list of options that can be set in
+Local/eximon.conf when building the Exim monitor. Where the default is shown as
+** it means that the text string is too long to fit in the table and is instead
+given below. A blank default means that there is no default value.
+
+ACTION_OUTPUT=no                          show output for every action
+ACTION_QUEUE_UPDATE=yes                   update queue display after actions
+BODY_MAX=20000                            maximum body display
+DOMAIN=                                   domain to strip from window title
+LOG_BUFFER=20K                            buffer for log tail
+LOG_DEPTH=300                             depth of log subwindow
+LOG_FONT=**                               font for log display
+LOG_STRIPCHARTS=**                        patterns for stripcharts
+LOG_WIDTH=950                             width of log subwindow
+MENU_EVENT='Shift<Btn1Down>'              keypress for menu
+MIN_HEIGHT=162                            minimum window height
+MIN_WIDTH=103                             minimum window width
+QUALIFY_DOMAIN=                           local domain to strip from addresses
+QUEUE_DEPTH=200                           depth of queue subwindow
+QUEUE_FONT=$LOG_FONT                      font for queue display
+QUEUE_INTERVAL=300                        queue refresh interval
+QUEUE_MAX_ADDRESSES=10                    max addresses to show in queue
+QUEUE_STRIPCHART_NAME=queue               name for queue stripchart
+QUEUE_WIDTH=950                           width of queue subwindow
+SIZE_STRIPCHART=                          request partition size stripchart
+SIZE_STRIPCHART_NAME=space                name for size stripchart
+START_SMALL=no                            if yes, start with small window
+STRIPCHART_INTERVAL=60                    stripchart refresh interval
+TEXT_DEPTH=200                            depth of text windows
+WINDOW_TITLE="${hostname} eximon"         window title
+
+The default for LOG_FONT is
+
+  LOG_FONT=-misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1
+
+and the default for LOG_STRIPCHARTS is
+
+  LOG_STRIPCHARTS='/ <= /in/
+                   / => /out/
+                   / => .+ R=local/local/
+                   / => .+ T=[^ ]*smtp/smtp/'
+
+That is, there are four stripcharts, named in, out, local, and smtp. The first
+counts message arrivals, the second counts all deliveries, the third counts
+deliveries where the router's name starts with "local", and the fourth counts
+deliveries where the transport name contains "smtp".
+
+**** End of OptionLists ****
diff --git a/doc/README b/doc/README
new file mode 100644
index 0000000..a019ab8
--- /dev/null
+++ b/doc/README
@@ -0,0 +1,65 @@
+Exim Documentation
+------------------
+
+This directory should contain the following files:
+
+  ChangeLog        most recent log of all changes to Exim
+  NewStuff         features that haven't made it to the manual yet,
+                   and/or a list of newly-added functionality
+  OptionLists.txt  lists of all Exim's options
+  README           this document
+  README.SIEVE     notes on the Sieve support
+  Exim3.upgrade    information about upgrading from release 2.12 to 3.00
+  Exim4.upgrade    information about upgrading from release 3.33 to 4.00
+  dbm.discuss.txt  discussion of DBM libraries
+  filter.txt       specification of filter file contents
+  spec.txt         main specification of Exim
+  experimental-spec.txt  specification of experimental features
+
+
+PostScript
+----------
+
+The Exim specifications are also available in PostScript. This is not included
+in the main distribution because not everyone wants it. Wherever you got this
+distribution from should also have carried another file called
+exim-postscript-<version>.tar.gz which contains the PostScript documentation.
+When de-tarred it creates a directory called exim-postscript-<version> into
+which it places the files doc/filter.ps and doc/spec.ps.
+
+
+HTML
+----
+
+A conversion from the original sources into HTML is done to create the online
+documentation at http://www.exim.org. This set of files is also available for
+installation on other servers. Wherever you got this distribution from should
+also have carried another file called exim-html-<version>.tar.gz which contains
+the HTML documentation. When de-tarred it creates a directory called
+exim-html-<version> into which it places a directory called doc/html containing
+the set of HTML files. The kick off point is the traditional index.html.
+
+
+PDF
+---
+
+The Exim specifications are available in Portable Document Format. Wherever you
+got this distribution from should also have carried another file called
+exim-pdf-<version>.tar.gz which contains the PDF documentation. When de-tarred
+it creates a directory called exim-pdf-<version> into which it places the files
+doc/filter.pdf and doc/spec.pdf.
+
+
+TeXinfo
+-------
+
+A version of the documentation that has been converted to TeXinfo format is
+available in the distribution file exim-texinfo-<version>.gz. When de-tarred it
+creates a directory called exim-texinfo-<version> into which it places the
+files doc/filter.texinfo and doc/spec.texinfo.
+
+The conversion process is automatic, so the result isn't as nice as
+hand-maintained TeXinfo files would be, and some information is lost; for
+example, TeXinfo does not support the use of change bars.
+
+-- End --
diff --git a/doc/README.SIEVE b/doc/README.SIEVE
new file mode 100644
index 0000000..d36998f
--- /dev/null
+++ b/doc/README.SIEVE
@@ -0,0 +1,343 @@
+              Notes on the Sieve implementation for Exim
+
+Exim Filter Versus Sieve Filter
+
+Exim supports two incompatible filters: The traditional Exim filter and
+the Sieve filter. Since Sieve is a extensible language, it is important
+to understand "Sieve" in this context as "the specific implementation
+of Sieve for Exim".
+
+The Exim filter contains more features, such as variable expansion, and
+better integration with the host environment, like external processes
+and pipes.
+
+Sieve is a standard for interoperable filters, defined in RFC 5228,
+with multiple implementations around. If interoperability is important,
+then there is no way around it.
+
+
+Exim Implementation
+
+The Exim Sieve implementation offers the core as defined by RFC 5228,
+the "encoded-character" extension (RFC 5228), the "envelope" test (RFC
+5228), the "fileinto" action (5228), the "copy" parameter (RFC 3894), the
+"vacation" action (5230), the "notify" action (draft-ietf-sieve-notify-12)
+with mailto URIs (draft-ietf-sieve-notify-mailto-05), the
+"i;ascii-numeric" comparator (RFC 2244) and the subaddress parameter
+(RFC 5233).
+
+The Sieve filter is integrated in Exim and works very similar to the
+Exim filter: Sieve scripts are recognized by the first line containing
+"# sieve filter".  When using "keep" or "fileinto" to save a mail into a
+folder, the resulting string is available as the variable $address_file
+in the transport that stores it.  The following routers and transport
+show a typical use of Sieve:
+
+begin routers
+
+localuser_verify:
+  driver = accept
+  domains = +localdomains
+  local_part_suffix = "-*"
+  local_part_suffix_optional
+  check_local_user
+  require_files = $home/.forward
+  verify_only = true
+
+localuser_deliver:
+  driver = redirect
+  domains = +localdomains
+  local_part_suffix = "-*"
+  local_part_suffix_optional
+  sieve_subaddress = "${sg{$local_part_suffix}{^-}{}}"
+  sieve_useraddress = "$local_part"
+  check_local_user
+  require_files = $home/.forward
+  file = $home/.forward
+  check_ancestor
+  allow_filter
+  file_transport = localuser
+  reply_transport = vacation
+  sieve_vacation_directory = $home/mail/vacation
+  verify = false
+
+begin transports
+
+localuser:
+  driver = appendfile
+  file = ${if eq{$address_file}{inbox} \
+              {/var/mail/$local_part} \
+              {${if eq{${substr_0_1:$address_file}}{/} \
+                    {$address_file} \
+                    {$home/mail/$address_file} \
+              }} \
+         }
+  delivery_date_add
+  envelope_to_add
+  return_path_add
+  mode = 0600
+
+vacation:
+  driver = autoreply
+
+Absolute files are stored where specified, relative files are stored
+relative to $home/mail and "inbox" goes to the standard mailbox location.
+To enable "vacation", sieve_vacation_directory is set to the directory
+where vacation databases are held (don't put anything else in that
+directory) and point reply_transport to an autoreply transport.
+Setting the Sieve useraddress and subaddress allows to use the subaddress
+extension.
+
+
+RFC Compliance
+
+Exim requires the first line to be "# sieve filter".  Of course the RFC
+does not enforce that line.  Don't expect examples to work without adding
+it, though.
+
+RFC 5228 requires using CRLF to terminate the end of a line.
+The rationale was that CRLF is universally used in network protocols
+to mark the end of the line.  This implementation does not embed Sieve
+in a network protocol, but uses Sieve scripts as part of the Exim MTA.
+Since all parts of Exim use \n as newline character, this implementation
+does, too.  You can change this by defining the macro RFC_EOL at compile
+time to enforce CRLF being used.
+
+The folder specified by "fileinto" must not contain the character
+sequence ".." to avoid security problems.  RFC 5228 does not specify the
+syntax of folders apart from keep being equivalent to fileinto "INBOX".
+This implementation uses "inbox" instead.
+
+Sieve script errors currently cause that messages are silently filed into
+"inbox".  RFC 5228 requires that the user is notified of that condition.
+This may be implemented in future by adding a header line to mails that
+are filed into "inbox" due to an error in the filter.
+
+The automatic replies generated by "vacation" do not contain an updated
+"references" header field.
+
+
+Semantics Of Keep
+
+The keep command is equivalent to fileinto "inbox": It saves the
+message and resets the implicit keep flag.  It does not set the
+implicit keep flag; there is no command to set it once it has
+been reset.
+
+
+Semantics Of Fileinto
+
+RFC 5228 does not specify if "fileinto" tries to create a mail folder,
+in case it does not exist.  This implementation allows to configure
+that aspect using the appendfile transport options "create_directory",
+"create_file" and "file_must_exist".  See the appendfile transport in
+the Exim specification for details.
+
+
+Allof And Anyof Test
+
+RFC 5228 does not specify if these tests use shortcut/lazy evaluation.
+Exim uses shortcut evaluation.
+
+
+Action Reordering
+
+RFC 5228 does not specify if actions may be executed out of order.
+Exim may execute them out of order, e.g. messages may be filed to
+folders or forwarded in a different order than specified, because
+those actions only setup delivery, but do not execute it themselves.
+
+
+Sieve Syntax And Semantics
+
+RFC 5228 uses a generic grammar as syntax for commands and tests and
+performs many checks during semantic analysis.  Syntax is specified
+by grammar rules, semantics by natural language.  The intention is to
+provide a framework for the syntax that describes current commands as
+well as future extensions, and describing commands by semantics.
+
+The following replacement for section 8.2 gives a grammar for specific
+commands of this implementation, thus removing most of the semantic
+analysis.  Since the parser can not parse unsupported extensions, the
+result is strict error checking of any executed and not executed code
+until "stop" is executed or the end of the script is reached.
+
+8.2. Grammar
+
+The grammar is specified in ABNF with two extensions to describe tagged
+arguments that can be reordered and grammar extensions: { } denotes a
+sequence of symbols that may appear in any order.  Example:
+
+  options = a b c
+  start   = { options }
+
+is equivalent to:
+
+  start   =  ( a b c ) / ( a c b ) / ( b a c ) / ( b c a ) / ( c a b ) / ( c b a )
+
+The symbol =) is used to append to a rule:
+
+  start =  a
+  start =) b
+
+is equivalent to
+
+  start =  a b
+
+The basic Sieve commands are specified using the following grammar, which
+language is a subset of the generic grammar above.  The start symbol is
+"start".
+
+  address-part     =  ":localpart" / ":domain" / ":all"
+  comparator       =  ":comparator" string
+  match-type       =  ":is" / ":contains" / ":matches"
+  string           =  quoted-string / multi-line
+  string-list      =  "[" string *("," string) "]" / string
+  address-test     =  "address" { [address-part] [comparator] [match-type] }
+                      string-list string-list
+  test-list        =  "(" test *("," test) ")"
+  allof-test       =  "allof" test-list
+  anyof-test       =  "anyof" test-list
+  exists-test      =  "exists" string-list
+  false-test       =  "false"
+  true=test        =  "true"
+  header-test      =  "header" { [comparator] [match-type] }
+                      string-list string-list
+  not-test         =  "not" test
+  relop            =  ":over" / ":under"
+  size-test        =  "size" relop number
+  block            =  "{" commands "}"
+  if-command       =  "if" test block *( "elsif" test block ) [ "else" block ]
+  stop-command     =  "stop" { stop-options } ";"
+  stop-options     =
+  keep-command     =  "keep" { keep-options } ";"
+  keep-options     =
+  discard-command  =  "discard" { discard-options } ";"
+  discard-options  =
+  redirect-command =  "redirect" { redirect-options } string ";"
+  redirect-options =
+  require-command  =  "require" { require-options } string-list ";"
+  require-options  =
+  test             =  address-test / allof-test / anyof-test / exists-test
+                      / false-test / true-test / header-test / not-test
+                      / size-test
+  command          =  if-command / stop-command / keep-command
+                      / discard-command / redirect-command
+  commands         =  *command
+  start            =  *require-command commands
+
+The extensions "envelope" and "fileinto" are specified using the following
+grammar extension.
+
+  envelope-test    =  "envelope" { [comparator] [address-part] [match-type] }
+                      string-list string-list
+  test             =/ envelope-test
+
+  fileinto-command =  "fileinto" { fileinto-options } string ";"
+  fileinto-options =
+  command          =/ fileinto-command
+
+The extension "copy" is specified as:
+
+  fileinto-options =) ":copy"
+  redirect-options =) ":copy"
+
+
+The i;ascii-numeric Comparator
+
+RFC 2244 describes this comparator and specifies that non-numeric strings
+are considered equal with an ordinal value higher than any numeric string.
+Although not stated explicitly, this includes the empty string.  A range
+of at least 2^31 is required.  This implementation does not limit the
+range, because it does not convert numbers to binary representation
+before comparing them.
+
+
+The vacation extension
+
+The extension "vacation" is specified using the following grammar
+extension.
+
+  vacation-command =  "vacation" { vacation-options } <reason: string>
+  vacation-options =  [":days" number]
+                      [":subject" string]
+                      [":from" string]
+                      [":addresses" string-list]
+                      [":mime"]
+                      [":handle" string]
+  command          =/ vacation-command
+
+
+Semantics Of ":mime"
+
+The draft does not specify how strings using MIME entities are used
+to compose messages.  As a result, different implementations generate
+different mails.  The Exim Sieve implementation splits the reason into
+header and body.  It adds the header to the mail header and uses the body
+as mail body.  Be aware, that other implementations compose a multipart
+structure with the reason as only part.  Both conform to the specification
+(or lack thereof).
+
+
+Semantics Of Not Using ":mime"
+
+Sieve scripts are written in UTF-8, so is the reason string in this
+case.  This implementation adds MIME headers to indicate that.  This
+is not required by the vacation draft, which does not specify how
+the UTF-8 reason is processed to compose the resulting message.
+
+
+Default Subject
+
+RFC 5230 specifies that the default message subject is "Auto: " plus
+the old subject.  Using this subject is dangerous, because many mailing
+lists verify addresses by sending a secret key in the subject of a
+message, asking to reply to the message for confirmation.  Using the
+default vacation subject confirms any subscription request of this kind,
+allowing to subscribe a third party to any mailing list, either to annoy
+the user or to declare spam as legitimate mail by proving to use opt-in.
+
+
+Rate Limiting Responses
+
+In absence of a handle, this implementation hashes the reason,
+":subject" option, ":mime" option and ":from" option and uses the hex
+string representation as filename within the "sieve_vacation_directory"
+to store the recipient addresses for this vacation parameter set.
+
+The draft specifies that sites may define a minimum ":days" value than 1.
+This implementation uses 1.  The maximum value MUST greater than 7,
+and SHOULD be greater than 30.  This implementation uses a maximum of 31.
+
+Vacation recipient address databases older than 31 days are automatically
+removed.  Users do not have to remove them manually when modifying their
+scripts.  Don't put anything but vacation databases in that directory
+or you risk that it will be removed, too!
+
+
+Global Reply Address Blacklist
+
+The draft requires that each implementation offers a global black list
+of addresses that will never be replied to.  Exim offers this as option
+"never_mail" in the autoreply transport.
+
+
+The enotify extension
+
+The extension "enotify" is specified using the following grammar
+extension.
+
+  notify-command =  "notify" { notify-options } <method: string>
+  notify-options =  [":from" string]
+                    [":importance" <"1" / "2" / "3">]
+                    [":options" 1*(string-list / number)]
+                    [":message" string]
+
+  command          =/ notify-command
+
+  valid_notify_method = "valid_notify_method"
+                        <notification-uris: string-list>
+
+  test             =/ valid_notify_method
+
+Only the mailto URI scheme is implemented.
diff --git a/doc/cve-2016-9663 b/doc/cve-2016-9663
new file mode 100644
index 0000000..ffff3db
--- /dev/null
+++ b/doc/cve-2016-9663
@@ -0,0 +1,95 @@
+CVE ID:     CVE-2016-9963
+Date:       2016-12-15
+Credits:    Bjoern Jacke <bjoern@j3e.de>
+Version(s): 4.69 -> 4.87
+Issue:      If several conditions are met, Exim leaks private information
+            to a remote attacker.
+
+Conditions
+==========
+
+If *all* of the following conditions are met
+
+    Build options
+    -------------
+
+    * Exim is built with DKIM enabled (default for newer versions)
+      exim -bV | grep 'Support.*DKIM'
+
+    Runtime options
+    ---------------
+
+    * Exim uses DKIM signing (transport options dkim_private_key,
+      dkim_domain, and other)
+
+    * The dkim_private_key option names a file containing the key.
+
+      exim -bP transports | grep 'dkim_private_key = .'
+
+    * Exim uses PRDR (transport option hosts_try_prdr) (default
+      since 4.86)
+
+      exim -bP transports | grep 'hosts_try_prdr = .'
+
+      *OR*
+
+      Exim uses the LMTP protocol variant for SMTP transport.
+
+      exim -bP transports | grep 'protocol = lmtp'
+
+    Operation
+    ---------
+
+    * Exim transports a multi-recipient message
+
+    * The destination host supports PRDR
+      OR
+      the message transport uses LMTP
+
+    * One or more recipients are rejected after the DATA phase
+
+Impact
+======
+
+Exim leaks the private DKIM signing key to the log files.  Additionally,
+if the build option EXPERIMENTAL_DSN_INFO=yes is used, the key material
+is included in the bounce message.
+
+Fix
+===
+
+Install a fixed Exim version:
+
+    4.88
+    4.87.1
+
+If you can't install one of the above versions, ask your package
+maintainer for a version containing the backported fix. On request and
+depending on our resources we will support you in backporting the fix.
+(Please note, that Exim project officially doesn't support versions
+prior the current stable version.)
+
+If you think that you MIGHT be affected, we HIGHLY recommend to create
+a new set of DKIM keys and fade out the previous DKIM key soon to make
+sure that a possibly leaked DKIM key can not be misused in the future.
+
+
+Workaround
+==========
+
+Disable PRDR in your outgoing transport(s): set hosts_try_prdr to an
+empty string.
+
+AND do not use the LMTP protocol variant of the SMTP driver.
+
+Indication
+==========
+
+You can check if you where affected already. The mainlog entries look like this:
+
+2016-12-17 09:44:33 10HmaX-0005vi-00 ** baduser@test.ex R=client T=send_to_server H=ip4.ip4.ip4.ip4 [ip4.ip4.ip4.ip4]: PRDR error after -----BEGIN RSA PRIVATE KEY-----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\nfKQax6vhiMq+0qIiEwLA1wavyLVKZ7Mfag+/4NTcDUVC\n-----END RSA PRIVATE KEY-----\n: 550 PRDR R=<baduser@test.ex> refusal
+
+Even if there is no evidence in the existing log files, that a DKIM key
+leakage happened this might have happened in the past, log files might
+have been deleted already but a key leak could have ended up via mail
+bounce in a user mail box
diff --git a/doc/cve-2019-13917 b/doc/cve-2019-13917
new file mode 100644
index 0000000..fd94da8
--- /dev/null
+++ b/doc/cve-2019-13917
@@ -0,0 +1,46 @@
+CVE ID:     CVE-2019-13917
+OVE ID:     OVE-20190718-0006
+Date:       2019-07-18
+Credits:    Jeremy Harris
+Version(s): 4.85 up to and including 4.92
+Issue:      A local or remote attacker can execute programs with root
+            privileges - if you've an unusual configuration. See below.
+
+Conditions to be vulnerable
+===========================
+
+If your configuration uses the ${sort } expansion for items that can be
+controlled by an attacker (e.g. $local_part, $domain). The default
+config, as shipped by the Exim developers, does not contain ${sort }.
+
+Details
+=======
+
+The vulnerability is exploitable either remotely or locally and could
+be used to execute other programs with root privilege.  The ${sort }
+expansion re-evaluates its items.
+
+Mitigation
+==========
+
+Do not use ${sort } in your configuration.
+
+Fix
+===
+
+Download and build a fixed version:
+
+    Tarballs: http://ftp.exim.org/pub/exim/exim4/
+    Git:      https://github.com/Exim/exim.git
+              - tag    exim-4.92.1
+              - branch exim-4.92+fixes
+
+The tagged commit is the officially released version. The +fixes branch
+isn't officially maintained, but contains useful patches *and* the
+security fix.
+
+If you can't install the above versions, ask your package maintainer for
+a version containing the backported fix. On request and depending on our
+resources we will support you in backporting the fix.  (Please note,
+that Exim project officially doesn't support versions prior the current
+stable version.)
diff --git a/doc/cve-2019-15846/cve.txt b/doc/cve-2019-15846/cve.txt
new file mode 100644
index 0000000..b52722b
--- /dev/null
+++ b/doc/cve-2019-15846/cve.txt
@@ -0,0 +1,45 @@
+CVE ID:     CVE-2019-15846
+Date:       2019-09-02 (CVE assigned)
+Credits:    Zerons <sironhide0null@gmail.com> for the initial report
+            Qualys https://www.qualys.com/ for the analysis
+Version(s): all versions up to and including 4.92.1
+Issue:      A local or remote attacker can execute programs with root
+            privileges.
+
+Conditions to be vulnerable
+===========================
+
+If your Exim server accepts TLS connections, it is vulnerable. This does
+not depend on the TLS libray, so both, GnuTLS and OpenSSL are affected.
+
+Details
+=======
+
+The vulnerability is exploitable by sending a SNI ending in a
+backslash-null sequence during the initial TLS handshake. The exploit
+exists as a POC. For more details see the document qualys.mbx
+
+Mitigation
+==========
+
+Do not offer TLS. (This mitigation is not recommended.)
+
+Fix
+===
+
+Download and build a fixed version:
+
+    Tarballs: https://ftp.exim.org/pub/exim/exim4/
+    Git:      https://github.com/Exim/exim.git
+              - tag    exim-4.92.2
+              - branch exim-4.92.2+fixes
+
+The tagged commit is the officially released version. The +fixes branch
+isn't officially maintained, but contains the security fix *and* useful
+fixes.
+
+If you can't install the above versions, ask your package maintainer for
+a version containing the backported fix. On request and depending on our
+resources we will support you in backporting the fix.  (Please note,
+the Exim project officially doesn't support versions prior the current
+stable version.)
diff --git a/doc/cve-2019-15846/mitre.mbx b/doc/cve-2019-15846/mitre.mbx
new file mode 100644
index 0000000..ddd6f9c
--- /dev/null
+++ b/doc/cve-2019-15846/mitre.mbx
@@ -0,0 +1,84 @@
+From cve-request@mitre.org Mon Sep  2 18:12:21 2019
+Return-Path: <cve-request@mitre.org>
+Authentication-Results: mx.net.schlittermann.de; iprev=pass
+ (smtpvbsrv1.mitre.org) smtp.remote-ip=198.49.146.234; spf=pass
+ smtp.mailfrom=mitre.org; dkim=pass header.d=mitre.org header.s=selector1
+ header.a=rsa-sha256; dmarc=pass header.from=mitre.org
+From: cve-request@mitre.org
+To: hs@schlittermann.de
+Cc: cve-request@mitre.org
+Subject: Re: [scr749683] one CVE
+Date: Mon,  2 Sep 2019 12:12:12 -0400 (EDT)
+MIME-Version: 1.0
+Content-Transfer-Encoding: 8bit
+Content-Type: text/plain; charset=utf-8
+Status: RO
+
+> [Suggested description]
+> The SMTP Delivery process in Exim 4.92.1 has a Buffer Overflow.
+> In the default runtime configuration, this is exploitable with crafted
+> Server Name Indication (SNI) data during a TLS negotiation. In other
+> configurations, it is exploitable with a crafted client TLS certificate.
+> 
+> ------------------------------------------
+> 
+> [Additional Information]
+> It's the first CVE I request, so if there is anything missing, please tell me
+> 
+> ------------------------------------------
+> 
+> [Vulnerability Type]
+> Buffer Overflow
+> 
+> ------------------------------------------
+> 
+> [Vendor of Product]
+> Exim Development Team
+> 
+> ------------------------------------------
+> 
+> [Affected Product Code Base]
+> Exim - 4.92.1
+> 
+> ------------------------------------------
+> 
+> [Affected Component]
+> SMTP Delivery process
+> 
+> ------------------------------------------
+> 
+> [Attack Type]
+> Remote
+> 
+> ------------------------------------------
+> 
+> [Impact Code execution]
+> true
+> 
+> ------------------------------------------
+> 
+> [Attack Vectors]
+> To exploit the vulnerability the attacker needs a crafted client TLS
+> certificate or a crafted SNI. While the first attack vector needs a
+> non-default runtime configuration, the latter one should work with the
+> default runtime config.
+> 
+> ------------------------------------------
+> 
+> [Discoverer]
+> zerons zerons <sironhide0null@gmail.com>
+> 
+> ------------------------------------------
+> 
+> [Reference]
+> http://exim.org/static/doc/security/CVE-2019-15846.txt
+
+Use CVE-2019-15846.
+
+
+-- 
+CVE Assignment Team
+M/S M300, 202 Burlington Road, Bedford, MA 01730 USA
+[ A PGP key is available for encrypted communications at
+  http://cve.mitre.org/cve/request_id.html ]
+
diff --git a/doc/cve-2019-15846/posting-0.txt b/doc/cve-2019-15846/posting-0.txt
new file mode 100644
index 0000000..90d754d
--- /dev/null
+++ b/doc/cve-2019-15846/posting-0.txt
@@ -0,0 +1,59 @@
+To: distros@vs.openwall.org, exim-maintainers@exim.org
+From: [ do not use a dmarc protected sender ]
+
+** EMBARGO *** This information is not public yet.
+
+CVE ID:     CVE-2019-15846
+Credits:    Zerons <sironhide0null@gmail.com>, Qualys
+Version(s): all versions up to and including 4.92.1
+Issue:      The SMTP Delivery process in all versions up to and
+            including Exim 4.92.1 has a Buffer Overflow.  In the default
+            runtime configuration, this is exploitable with crafted Server
+            Name Indication (SNI) data during a TLS negotiation. In other
+            configurations, it is exploitable with a crafted client TLS certificate.
+Details:    doc/doc-txt/cve-2019-15846 in the downloaded source tree
+
+Contact:    security@exim.org
+
+Proposed Timeline
+=================
+
+2019-09-03:
+    - This notice to distros@vs.openwall.org and exim-maintainers@exim.org
+    - Open limited access to our security Git repo. See below.
+
+2019-09-04:
+    - Heads-up notice to oss-security@lists.openwall.com,
+      exim-users@exim.org, and exim-announce@exim.org
+      about the upcoming security release
+
+2019-09-06 10:00 UTC:
+    - Coordinated relase date
+    - Publish the patches in our official and public Git repositories
+      and the packages on our FTP/HTTP(S) server.
+
+Downloads
+=========
+
+The downloads mentioned below are accessible only for a limited set of SSH
+keys. At CRD they will be mirrored to the public repositories.
+(Note: the repo names changed from the recently used ones.)
+
+For release tarballs (exim-4.92.2):
+
+    git clone --depth 1 ssh://git@git.exim.org/exim-packages-security
+
+The package files are signed with my GPG key.
+
+For the full Git repo:
+
+    git clone ssh://git@exim.org/exim-security
+    - tag    exim-4.92.2
+    - branch exim-4.92.2+fixes
+
+The tagged commit is the officially maintained version. The tag is signed
+with my GPG key.  The +fixes branch isn't officially maintained, but
+contains useful patches *and* the security fix. The relevant commit
+is signed with my GPG key.
+
+If you need help backporting the patch, please contact us directly.
diff --git a/doc/cve-2019-15846/posting-1.txt b/doc/cve-2019-15846/posting-1.txt
new file mode 100644
index 0000000..d22b85c
--- /dev/null
+++ b/doc/cve-2019-15846/posting-1.txt
@@ -0,0 +1,59 @@
+To: oss-security@lists.openwall.com, exim-users@exim.org,
+    exim-announce@exim.org
+From: [ do not use a dmarc protected sender ]
+
+*** Note: EMBARGO is still in effect        ***
+*** Distros must not publish any detail yet ***
+
+Head up! Security release ahead!
+
+CVE ID:     CVE-2019-15846
+Version(s): up to and including 4.92.1
+Issue:      A local or remote attacker can execute programs with root
+            privileges.
+Details:    Will be made public at CRD.
+
+Coordinated Release Date (CRD) for Exim 4.92.2: 2019-09-06 10:00 UTC
+
+Contact:    security@exim.org
+
+Proposed Timeline
+=================
+
+2019-09-03:
+    - initial notification to distros@openwall.org and
+      exim-maintainers@exim.org
+
+2019-09-04: <-- NOW
+    - This Heads-up notice to oss-security@lists.openwall.com,
+      exim-users@exim.org, and exim-announce@exim.org
+
+2019-09-06 10:00 UTC:
+    - Coordinated relase date
+    - Publish the patches in our official and public Git repositories
+      and the packages on our FTP server.
+
+Downloads available starting at CRD
+====================================
+
+The downloads are not yet available. They will be made available
+at the above mentioned CRD.
+
+Release tarballs (exim-4.92.2):
+
+    https://ftp.exim.org/pub/exim/exim4/
+
+The package files are signed with my GPG key.
+
+The full Git repo:
+
+    https://git.exim.org/exim.git
+    https://github.com/Exim/exim    [mirror of the above]
+    - tag    exim-4.92.2
+    - branch exim-4.92.2+fixes
+
+The tagged commit is the officially released version. The tag is signed
+with my GPG key.  The +fixes branch isn't officially maintained, but
+contains useful patches *and* the security fix. The relevant commit is
+signed with my GPG key. The old exim-4.92.1+fixes branch is being functionally
+replaced by the new exim-4.92.2+fixes branch.
diff --git a/doc/cve-2019-15846/posting-2.txt b/doc/cve-2019-15846/posting-2.txt
new file mode 100644
index 0000000..20037dd
--- /dev/null
+++ b/doc/cve-2019-15846/posting-2.txt
@@ -0,0 +1,44 @@
+To: exim-users@exim.org, exim-announce@exim.org, exim-maintainers@exim.org
+From: [ do not use a dmarc protected sender ]
+
+CVE ID:     CVE-2019-15846
+Credits:    Zerons <sironhide0null@gmail.com>, Qualys
+Version(s): all versions up to and including 4.92.1
+Issue:      The SMTP Delivery process in all versions up to and
+            including Exim 4.92.1 has a Buffer Overflow.  In the default
+            runtime configuration, this is exploitable with crafted Server
+            Name Indication (SNI) data during a TLS negotiation. In other
+            configurations, it is exploitable with a crafted client TLS certificate.
+Details:    doc/doc-txt/cve-2019-15846 in the downloaded source tree
+
+Coordinated Release Date (CRD) for Exim 4.92.2:
+            2019-09-06 10:00 UTC
+
+Contact:    security@exim.org
+
+We released Exim 4.92.2. This is a security update based on 4.92.1.
+
+Downloads
+=========
+
+Starting at CRD the downloads will be available from the following
+sources:
+
+Release tarballs (exim-4.92.2):
+
+    https://ftp.exim.org/pub/exim/exim4/
+
+The package files are signed with my GPG key.
+
+The full Git repo:
+
+    https://git.exim.org/exim.git
+    https://github.com/Exim/exim    [mirror of the above]
+    - tag    exim-4.92.2
+    - branch exim-4.92.2+fixes
+
+The tagged commit is the officially released version. The tag is signed
+with my GPG key.  The +fixes branch isn't officially maintained, but
+contains useful patches *and* the security fix. The relevant commit is
+signed with my GPG key. The old exim-4.92.1+fixes branch is being functionally
+replaced by the new exim-4.92.2+fixes branch.
diff --git a/doc/cve-2019-15846/qualys.mbx b/doc/cve-2019-15846/qualys.mbx
new file mode 100644
index 0000000..66c1e8e
--- /dev/null
+++ b/doc/cve-2019-15846/qualys.mbx
@@ -0,0 +1,175 @@
+From qsa@qualys.com Wed Aug 14 01:29:25 CEST 2019
+Date: Tue, 13 Aug 2019 23:29:25 +0000
+From: Qualys Security Advisory <qsa@qualys.com>
+To: Heiko Schlittermann <hs@schlittermann.de>
+Subject: Re: Help evaluating a Bug in Exim MTA
+Return-Path: <qsa@qualys.com>
+Authentication-Results: mx.net.schlittermann.de; iprev=pass
+ (mx0b-001ca501.pphosted.com) smtp.remote-ip=148.163.158.195; spf=pass
+ smtp.mailfrom=qualys.com; dkim=pass header.d=qualys.com header.s=qualyscom
+ header.a=rsa-sha256; dkim=pass header.d=qualys.onmicrosoft.com
+ header.s=selector2-qualys-onmicrosoft-com header.a=rsa-sha256; dmarc=none
+ header.from=qualys.com
+Authentication-Results: ppops.net; spf=pass smtp.mailfrom=qsa@qualys.com
+Status: O
+Content-Length: 3899
+Lines: 80
+
+Hi Heiko,
+
+On Mon, Aug 12, 2019 at 11:56:12PM +0200, Heiko Schlittermann wrote:
+> So I'd say, you do not need to rush, but I'd like to close it sooner or
+> later in either manner.
+
+OK, below is our preliminary analysis. First:
+
+- From an attacker's point of view, most calls to
+  string_interpret_escape() are uninteresting. For example, nextitem()
+  in src/filter.c checks for buffer overflows, and string_dequote()
+  seems to process trusted strings only (strings from configuration
+  files).
+
+- On the other hand, string_unprinting() is very interesting:
+
+  - It is used in tls_import_cert() (for peercert, for example); but
+    certificates are in PEM format (i.e., base64) and hence unlikely to
+    contain the problematic backslash-null-byte sequence.
+
+  - It is used for peerdn and sni in src/spool_in.c; but peerdn is used
+    only if client certificates are processed by Exim, and this is not
+    the default (and although some sites use client-certificate
+    authentication, this is not very common, and hence not very
+    interesting for an attacker).
+
+  - In any case, as long as Exim supports and accepts tls connections,
+    an attacker can send an sni, and hence reach the problematic
+    string_unprinting() and string_interpret_escape() functions.
+
+Next question: is it possible to send an sni that is written to the
+spool header file and that ends with the problematic backslash-null-byte
+sequence? The answer is yes, because of what we believe is another bug,
+in string_printing(): the sni is written to the spool header file via
+string_printing(tls_in.sni), which escapes characters with backslash,
+but does *not* escape the escaping character itself (backslash),
+although it definitely should.
+
+This bug is what makes it possible to reach and trigger the bug in
+string_unprinting() and string_interpret_escape(), with an sni that ends
+in an unescaped backslash (followed by the terminating null byte).
+
+Last question: is this exploitable? The answer is, almost certainly, yes
+(and, because spool_read_header() runs as root, this means remote root).
+
+The sni is read from the spool via string_unprinting(string_copy()), and
+both string_unprinting() and string_copy() use store_get(): as a result,
+the destination buffer is allocated right after the source buffer, and
+the characters that are read out-of-bounds after the end of the source
+buffer are the first characters of the destination buffer, which are
+fully under the attacker's control. This results in a heap overflow
+whose length and contents are both under the attacker's control (we
+verified this). This is almost certainly exploitable.
+
+Our advice is to start the security-release process as soon as possible.
+We know it is very painful, but we are really confident that this bug is
+exploitable; we will try to confirm this in the next few days. We also
+believe that an Exim server must support and accept tls connections to
+be remotely exploitable (via sni).
+
+During our analysis of this bug, we probably spotted three other bugs:
+
+- The unescaped backslash in string_printing() that we mentioned above.
+
+- A bug in spool_read_header(): before the for (;;) loop, p is set to
+  big_buffer + 2; and inside the loop, big_buffer may be re-allocated;
+  but p is never updated. This can lead to a use-after-free (we did not
+  assess the security impact of this bug, though).
+
+- A bug in spool_write_header(): the return value of tls_export_cert()
+  is not checked (for ourcert, but more importantly, for peercert). If
+  this function fails (maybe because big_buffer is not big enough), then
+  big_buffer may be uninitialized or unterminated, and garbage may be
+  written to the spool file (we did not assess the security impact of
+  this bug, either).
+
+We are at your disposal for questions, comments, and further
+discussions. Thank you very much for reaching out! With best regards,
+
+--
+the Qualys Security Advisory team
+From qsa@qualys.com Mon Aug 19 00:23:03 CEST 2019
+Date: Sun, 18 Aug 2019 22:23:03 +0000
+From: Qualys Security Advisory <qsa@qualys.com>
+To: Heiko Schlittermann <hs@schlittermann.de>
+Subject: Re: Help evaluating a Bug in Exim MTA
+Return-Path: <qsa@qualys.com>
+Authentication-Results: mx.net.schlittermann.de; iprev=pass
+ (mx0a-001ca501.pphosted.com) smtp.remote-ip=148.163.156.198; spf=pass
+ smtp.mailfrom=qualys.com; dkim=pass header.d=qualys.com header.s=qualyscom
+ header.a=rsa-sha256; dkim=pass header.d=qualys.onmicrosoft.com
+ header.s=selector2-qualys-onmicrosoft-com header.a=rsa-sha256; dmarc=none
+ header.from=qualys.com
+Authentication-Results: ppops.net; spf=pass smtp.mailfrom=qsa@qualys.com
+Status: RO
+Content-Length: 2484
+Lines: 59
+
+Hi Heiko,
+
+On Tue, Aug 13, 2019 at 11:29:25PM +0000, Qualys Security Advisory wrote:
+> we are really confident that this bug is exploitable
+
+We can confirm that this bug is indeed exploitable: we wrote a
+rudimentary exploit that remotely obtains root privileges (because
+deliver_message() runs as root).
+
+Some general notes on this exploit:
+
+- To the best of our knowledge, the string_interpret_escape() bug
+  (backslash-null) is remotely exploitable if and only if Exim supports
+  and accepts TLS connections (because the only attack vector that we
+  know of is the string_unprinting() of SNI).
+
+- Both OpenSSL and GnuTLS installations are exploitable.
+
+- Our exploit is Linux-specific (because our heap-overflow exploitation
+  is specific to glibc's malloc implementation), but works on both i386
+  and amd64.
+
+Some detailed notes on this exploit:
+
+- First, we connect to Exim with TLS and send an SNI that ends with
+  backslash-null (this SNI is written unmodified to the spool because of
+  the unescaped-backslash bug in string_printing2()).
+
+- Second, we exploit the backslash-null bug in string_interpret_escape()
+  (our SNI is read from the spool and unescaped by string_unprinting()),
+  and we transform this out-of-bounds read into an out-of-bounds write
+  (a heap overflow).
+
+- Next, we use this heap overflow to overwrite the header of a free
+  malloc chunk, and increase its size to make it overlap with other,
+  already-allocated malloc chunks.
+
+- Last, we allocate this enlarged malloc chunk, and use it to overwrite
+  large parts of the heap (the already-allocated malloc chunks) with
+  arbitrary data:
+
+  . we overwrite the "id" string: it is used to build the message-log
+    file name, and therefore allows us to write to "/etc/passwd" (by
+    overwriting "id" with "/../../../../../../../../etc/passwd");
+
+  . we overwrite the "sender_address" string: it is written to the
+    message-log file, and therefore allows us to add a new user to
+    "/etc/passwd".
+
+Other exploitation methods may exist. We will not publish our exploit:
+it is a quick and dirty proof of concept, and we will not have the time
+to clean it anytime soon. However, please feel free to quote us on the
+exploitability of this bug (we do have a working exploit), and please
+feel free to quote all or parts of this email in your announcements.
+
+We are at your disposal for questions, comments, and further
+discussions. Thank you very much! With best regards,
+
+--
+the Qualys Security Advisory team
diff --git a/doc/cve-2020-qualys b/doc/cve-2020-qualys
new file mode 100644
index 0000000..d571644
--- /dev/null
+++ b/doc/cve-2020-qualys
@@ -0,0 +1,2 @@
+For the vulnerabilites reported by Qualys in October 2020 please see the
+Exim Website: https://exim.org/static/doc/security/CVE-2020-qualys/
diff --git a/doc/dbm.discuss.txt b/doc/dbm.discuss.txt
new file mode 100644
index 0000000..50f0687
--- /dev/null
+++ b/doc/dbm.discuss.txt
@@ -0,0 +1,321 @@
+DBM Libraries for use with Exim
+-------------------------------
+
+Background
+----------
+
+Exim uses direct-access (so-called "dbm") files for a number of different
+purposes. These are files arranged so that the data they contain is indexed and
+can quickly be looked up by quoting an appropriate key. They are used as
+follows:
+
+1. Exim keeps its "hints" databases in dbm files.
+
+2. The configuration can specify that certain things (e.g. aliases) be looked
+   up in dbm files.
+
+3. The configuration can contain expansion strings that involve lookups in dbm
+   files.
+
+4. The filter commands "mail" and "vacation" have a facility for replying only
+   once to each incoming address. The record of which addresses have already
+   received replies may be kept in a dbm file, depending on the configuration
+   option once_file_size.
+
+The runtime configuration can be set up without specifying 2 or 3, but Exim
+always requires the availability of a dbm library, for 1 (and 4 if configured
+that way).
+
+
+DBM Libraries
+-------------
+
+The original library that provided the dbm facility in Unix was called "dbm".
+This seems to have been superseded quite some time ago by a new version called
+"ndbm" which permits several dbm files to be open at once. Several operating
+systems, including those from Sun, contain ndbm as standard.
+
+A number of alternative libraries also exist, the most common of which seems to
+be Berkeley DB (just called DB hereinafter). Release 1.85 was around for
+some time, and various releases 2.x began to appear towards the end of 1997. In
+November 1999, version 3.0 was released, and the ending of support for 2.7.7,
+the last 2.x release, was announced for November 2000. (Support for 1.85 has
+already ceased.) There were further 3.x releases, but by the end of 2001, the
+current release was 4.0.14.  In 2022 it was 5.3.28 on Linux (the then-owner
+has developed it further but Exim does not support anything after 5.x).
+
+There are major differences in implementation and interface between the DB 1.x
+and 2.x/3.x/4.x releases, and they are best considered as two independent dbm
+libraries. Changes to the API were made for 3.0 and again for 3.1.
+
+Another DBM library is the GNU library, gdbm, though this does not seem to be
+very widespread.
+
+Yet another dbm library is tdb (Trivial Data Base) which has come out of the
+Samba project. The first releases seem to have been in mid-2000.
+
+Some older Linux releases contain gdbm as standard, while others contain no dbm
+library. More recent releases contain DB 1.85 or 2.x or later, and presumably
+will track the development of the DB library. Some BSD versions of Unix include
+DB 1.85 or later. All of the non-ndbm libraries except tdb contain
+compatibility interfaces so that programs written to call the ndbm functions
+should, in theory, work with them, but there are some potential pitfalls which
+have caught out Exim users in the past.
+
+Exim has been tested with ndbm, gdbm, DB 1.85, DB 2.x, DB 3.1, DB 4.0.14, and
+tdb 1.0.2, in various different modes in some cases, and is believed to work
+with all of them if it and they are properly configured.
+
+I have considered the possibility of calling different dbm libraries for
+different functions from a single Exim binary. However, because all bar one of
+the libraries provide ndbm compatibility interfaces (and therefore the same
+function names) it would require a lot of complicated, error-prone trickery to
+achieve this. Exim therefore uses a single library for all its dbm activities.
+
+However, Exim does also support cdb (Constant Data Base), an efficient file
+arrangement for indexed data that does not change incrementally (for example,
+alias files). This is independent of any dbm library and can be used alongside
+any of them.
+
+
+Locking
+-------
+
+The configuration option EXIMDB_LOCK_TIMEOUT controls how long Exim waits to
+get a lock on a hints database. From version 1.80 onwards, Exim does not
+attempt to take out a lock on an actual database file (this caused problems in
+the past). Instead, it takes out an fcntl() lock on a separate file whose name
+ends in ".lockfile". This ensures that Exim has exclusive access to the
+database before even attempting to open it. Exim creates the lock file the
+first time it needs it. It should never be removed.
+
+
+Main Pitfall
+------------
+
+The OS-specific configuration files that are used to build Exim specify the use
+of Berkeley DB on those systems where it is known to be standard. In the
+absence of any special configuration options, Exim uses the ndbm set of
+functions to control its dbm databases. This should work with any of the dbm
+libraries because those that are not ndbm have compatibility interfaces.
+However, there is one awful pitfall:
+
+Exim #includes a header file called ndbm.h which defines the functions and the
+interface data block; gdbm and DB 1.x provide their own versions of this header
+file, later DB versions do not. If it should happen that the wrong version of
+nbdm.h is seen by Exim, it may compile without error, but fail to operate
+correctly at runtime.
+
+This situation can easily arise when more than one dbm library is installed on
+a single host. For example, if you decide to use DB 1.x on a system where gdbm
+is the standard library, unless you are careful in setting up the include
+directories for Exim, it may see gdbm's ndbm.h file instead of DB's. The
+situation is even worse with later versions of DB, which do not provide an
+ndbm.h file at all.
+
+One way out of this for gdbm and any of the versions of DB is to configure Exim
+to call the DBM library in its native mode instead of via the ndbm
+compatibility interface, thus avoiding the use of ndbm.h. This is done by
+setting the USE_DB configuration option if you are using Berkeley DB, or
+USE_GDBM if you are using gdbm. This is the recommended approach.
+
+
+NDBM
+----
+
+The ndbm library holds its data in two files, with extensions .dir and .pag.
+This makes atomic updating of, for example, alias files, difficult, because
+simple renaming cannot be used without some risk. However, if your system has
+ndbm installed, Exim should compile and run without any problems.
+
+
+GDBM
+----
+
+The gdbm library, when called via the ndbm compatibility interface, makes two
+hard links to a single file, with extensions .dir and .pag. As mentioned above,
+gdbm provides its own version of the ndbm.h header, and you must ensure that
+this is seen by Exim rather than any other version. This is not likely to be a
+problem if gdbm is the only dbm library on your system.
+
+If gdbm is called via the native interface (by setting USE_GDBM in your
+Local/Makefile), it uses a single file, with no extension on the name, and the
+ndbm.h header is not required.
+
+The gdbm library does its own locking of the single file that it uses. From
+version 1.80 onwards, Exim locks on an entirely separate file before accessing
+a hints database, so gdbm's locking should always succeed.
+
+
+Berkeley DB 1.8x
+----------------
+
+1.85 was the most widespread DB 1.x release; there is also a 1.86 bug-fix
+release, but the belief is that the bugs it fixes will not affect Exim.
+However, maintenance for 1.x releases has been phased out.
+
+This dbm library can be called by Exim in one of two ways: via the ndbm
+compatibility interface, or via its own native interface. There are two
+advantages to doing the latter: (1) you don't run the risk of Exim's seeing the
+"wrong" version of the ndbm.h header, as described above, and (2) the
+performance is better. It is therefore recommended that you set USE_DB=yes in an
+appropriate Local/Makefile-xxx file. (If you are compiling for just one OS, it
+can go in Local/Makefile itself.)
+
+When called via the compatibility interface, DB 1.x creates a single file with
+a .db extension. When called via its native interface, no extension is added to
+the file name handed to it.
+
+DB 1.x does not do any locking of its own.
+
+
+Berkeley DB 2.x
+---------------
+
+DB 2.x was released in 1997. It is a major re-implementation and its native
+interface is incompatible with DB 1.x, though a compatibility interface was
+introduced in DB 2.1.0, and there is also an ndbm.h compatibility interface.
+
+Like 1.x, it can be called from Exim via the ndbm compatibility interface or
+via its native interface, and once again setting USE_DB in order to get the
+native interface is recommended. If USE_DB is *not* set, then you will have to
+provide a suitable version of ndbm.h, because one does not come with the DB 2.x
+distribution. A suitable version is:
+
+  /*************************************************
+  *              ndbm.h header for DB 2.x          *
+  *************************************************/
+
+  /* This header should replace any other version of ndbm.h when Berkeley DB
+  version 2.x is in use via the ndbm compatibility interface. Otherwise, any
+  extant version of ndbm.h may cause programs to misbehave. There doesn't seem
+  to be a version of ndbm.h supplied with DB 2.x, so I made this for myself.
+
+  Philip Hazel 12/Jun/97
+  */
+
+  #define DB_DBM_HSEARCH
+  #include <db.h>
+
+  /* End */
+
+When called via the compatibility interface, DB 2.x creates a single file with
+a .db extension. When called via its native interface, no extension is added to
+the file name handed to it.
+
+DB 2.x does not do any automatic locking of its own; it does have a set of
+functions for various forms of locking, but Exim does not use them.
+
+
+Berkeley DB 3.x
+---------------
+
+DB 3.0 was released in November 1999 and 3.1 in June 2000. The 3.x series is a
+development of the 2.x series and the above comments apply. Exim can
+automatically distinguish between the different versions, so it copes with the
+changes to the API without needing any special configuration.
+
+When Exim creates a DBM file using DB 3.x (e.g. when creating one of its hints
+databases), it specified the "hash" format. However, when it opens a DB 3 file
+for reading only, it specifies "unknown". This means that it can read DB 3
+files in other formats that are created by other programs.
+
+
+Berkeley DB 4.x
+---------------
+
+The 4.x series is a development of the 2.x and 3.x series, and the above
+comments apply.
+
+
+tdb
+---
+
+tdb 1.0.2 was released in September 2000. Its origin is the database functions
+that are used by the Samba project.
+
+
+
+Testing Exim's dbm handling
+---------------------------
+
+Because there have been problems with dbm file locking in the past, I built
+some testing code for Exim's dbm functions. This is very much a lash-up, but it
+is documented here so that anybody who wants to check that their configuration
+is locking properly can do so. Now that Exim does the locking on an entirely
+separate file, locking problems are much less likely, but this code still
+exists, just in case. Proceed as follows:
+
+. Build Exim in the normal way. This ensures that all the makesfiles etc. get
+  set up.
+
+. From within the build directory, obey "make test_dbfn". This makes a binary
+  file called test_dbfn. If you are experimenting with different configurations
+  you *must* do "make makefile" after changing anything, before obeying "make
+  test_dbfn" again, because the make target for test_dbfn isn't integrated
+  with the making of the makefile.
+
+. Identify a scratch directory where you have write access. Create a sub-
+  directory called "db" in the scratch directory.
+
+. Type the command "test_dbfn <scratch-directory>". This will output some
+  general information such as
+
+    Exim's db functions tester: interface type is db (v2)
+    DBM library: Berkeley DB: Sleepycat Software: DB 2.1.0: (6/13/97)
+    USE_DB is defined
+
+  It then says
+
+    Test the functions
+    >
+
+. At this point you can type commands to open a dbm file and read and write
+  data in it. First type the command "open <name>", e.g. "open junk". The
+  response should look like this
+
+    opened DB file <scratch-directory>/db/junk: flags=102
+    Locked
+    opened 0
+    >
+
+  The tester will have created a dbm file within the db directory of the
+  scratch directory. It will also have created a file with the extension
+  ".lockfile" in the same directory. Unlike Exim itself, it will not create
+  the db directory for itself if it does not exist.
+
+. To test the locking, don't type anything more for the moment. You now need to
+  set up another process running the same test_dbfn command, e.g. from a
+  different logon to the same host. This time, when you attempt to open the
+  file it should fail after a minute with a timeout error because it is
+  already in use.
+
+. If the second process doesn't produce any error message, but gets back to the
+  > prompt, then the locking is not working properly.
+
+. You can check that the second process gets the lock when the first process
+  releases it by exiting from the first process with ^D, q, or quit; or by
+  typing the command "close".
+
+. There are some other commands available that are not related to locking:
+
+     write <key> <data>
+     e.g.
+     write abcde the quick brown fox
+
+  writes a record to the database,
+
+     read <key>
+     delete <key>
+
+  read and delete a record, respectively, and
+
+     scan
+
+  scans the entire database. Note that the database is purely for testing the
+  dbm functions. It is *not* one of Exim's regular databases, and you should
+  not try running this testing program on any of Exim's real database
+  files.
+
+Philip Hazel
+Last update: June 2002
diff --git a/doc/exim.8 b/doc/exim.8
new file mode 100644
index 0000000..4b41796
--- /dev/null
+++ b/doc/exim.8
@@ -0,0 +1,1810 @@
+.TH EXIM 8
+.SH NAME
+exim \- a Mail Transfer Agent
+.SH SYNOPSIS
+.nf
+.B exim [options] arguments ...
+.B mailq [options] arguments ...
+.B rsmtp [options] arguments ...
+.B rmail [options] arguments ...
+.B runq [options] arguments ...
+.B newaliases [options] arguments ...
+.fi
+.
+.SH DESCRIPTION
+.rs
+.sp
+Exim is a mail transfer agent (MTA) developed at the University of Cambridge.
+It is a large program with very many facilities. For a full specification, see
+the reference manual. This man page contains only a description of the command
+line options. It has been automatically generated from the reference manual
+source, hopefully without too much mangling.
+.P
+Like other MTAs, Exim replaces Sendmail, and is normally called by user agents
+(MUAs) using the path \fI/usr/sbin/sendmail\fP when they submit messages for
+delivery (some operating systems use \fI/usr/lib/sendmail\fP). This path is
+normally set up as a symbolic link to the Exim binary. It may also be used by
+boot scripts to start the Exim daemon. Many of Exim's command line options are
+compatible with Sendmail so that it can act as a drop-in replacement.
+.
+.SH "DEFAULT ACTION"
+.rs
+.sp
+If no options are present that require a specific action (such as starting the
+daemon or a queue runner, testing an address, receiving a message in a specific
+format, or listing the queue), and there are no arguments on the command line,
+Exim outputs a brief message about itself and exits.
+.sp
+However, if there is at least one command line argument, \fB-bm\fR (accept a
+local message on the standard input, with the arguments specifying the
+recipients) is assumed. Thus, for example, if Exim is installed in
+\fI/usr/sbin\fP, you can send a message from the command line like this:
+.sp
+  /usr/sbin/exim -i <recipient-address(es)>
+  <message content, including all the header lines>
+  CTRL-D
+.sp
+The \fB-i\fP option prevents a line containing just a dot from terminating
+the message. Only an end-of-file (generated by typing CTRL-D if the input is
+from a terminal) does so.
+.
+.SH "SETTING OPTIONS BY PROGRAM NAME"
+.rs
+.sp
+If an Exim binary is called using one of the names listed in this section
+(typically via a symbolic link), certain options are assumed.
+.TP
+\fBmailq\fR
+Behave as if the option \fB\-bp\fP were present before any other options.
+The \fB\-bp\fP option requests a listing of the contents of the mail queue
+on the standard output.
+.TP
+\fBrsmtp\fR
+Behaves as if the option \fB\-bS\fP were present before any other options,
+for compatibility with Smail. The \fB\-bS\fP option is used for reading in a
+number of messages in batched SMTP format.
+.TP
+\fBrmail\fR
+Behave as if the \fB\-i\fP and \fB\-oee\fP options were present before
+any other options, for compatibility with Smail. The name \fBrmail\fR is used
+as an interface by some UUCP systems. The \fB\-i\fP option specifies that a
+dot on a line by itself does not terminate a non\-SMTP message; \fB\-oee\fP
+requests that errors detected in non\-SMTP messages be reported by emailing
+the sender.
+.TP
+\fBrunq\fR
+Behave as if the option \fB\-q\fP were present before any other options, for
+compatibility with Smail. The \fB\-q\fP option causes a single queue runner
+process to be started. It processes the queue once, then exits.
+.TP
+\fBnewaliases\fR
+Behave as if the option \fB\-bi\fP were present before any other options,
+for compatibility with Sendmail. This option is used for rebuilding Sendmail's
+alias file. Exim does not have the concept of a single alias file, but can be
+configured to run a specified command if called with the \fB\-bi\fP option.
+.
+.SH "OPTIONS"
+.rs
+.TP 10
+\fB\-\-\fP
+This is a pseudo\-option whose only purpose is to terminate the options and
+therefore to cause subsequent command line items to be treated as arguments
+rather than options, even if they begin with hyphens.
+.TP 10
+\fB\-\-help\fP
+This option causes Exim to output a few sentences stating what it is.
+The same output is generated if the Exim binary is called with no options and
+no arguments.
+.TP 10
+\fB\-\-version\fP
+This option is an alias for \fB\-bV\fP and causes version information to be
+displayed.
+.TP 10
+\fB\-Ac\fP
+\fB\-Am\fP
+These options are used by Sendmail for selecting configuration files and are
+ignored by Exim.
+.TP 10
+\fB\-B\fP<\fItype\fP>
+This is a Sendmail option for selecting 7 or 8 bit processing. Exim is 8\-bit
+clean; it ignores this option.
+.TP 10
+\fB\-bd\fP
+This option runs Exim as a daemon, awaiting incoming SMTP connections. Usually
+the \fB\-bd\fP option is combined with the \fB\-q\fP<\fItime\fP> option, to specify
+that the daemon should also initiate periodic queue runs.
+.sp
+The \fB\-bd\fP option can be used only by an admin user. If either of the \fB\-d\fP
+(debugging) or \fB\-v\fP (verifying) options are set, the daemon does not
+disconnect from the controlling terminal. When running this way, it can be
+stopped by pressing ctrl\-C.
+.sp
+By default, Exim listens for incoming connections to the standard SMTP port on
+all the host's running interfaces. However, it is possible to listen on other
+ports, on multiple ports, and only on specific interfaces.
+.sp
+When a listening daemon
+is started without the use of \fB\-oX\fP (that is, without overriding the normal
+configuration), it writes its process id to a file called exim\-daemon.pid
+in Exim's spool directory. This location can be overridden by setting
+PID_FILE_PATH in Local/Makefile. The file is written while Exim is still
+running as root.
+.sp
+When \fB\-oX\fP is used on the command line to start a listening daemon, the
+process id is not written to the normal pid file path. However, \fB\-oP\fP can be
+used to specify a path on the command line if a pid file is required.
+.sp
+The SIGHUP signal
+can be used to cause the daemon to re\-execute itself. This should be done
+whenever Exim's configuration file, or any file that is incorporated into it by
+means of the \fB.include\fP facility, is changed, and also whenever a new version
+of Exim is installed. It is not necessary to do this when other files that are
+referenced from the configuration (for example, alias files) are changed,
+because these are reread each time they are used.
+.TP 10
+\fB\-bdf\fP
+This option has the same effect as \fB\-bd\fP except that it never disconnects
+from the controlling terminal, even when no debugging is specified.
+.TP 10
+\fB\-be\fP
+Run Exim in expansion testing mode. Exim discards its root privilege, to
+prevent ordinary users from using this mode to read otherwise inaccessible
+files. If no arguments are given, Exim runs interactively, prompting for lines
+of data. Otherwise, it processes each argument in turn.
+.sp
+If Exim was built with USE_READLINE=yes in Local/Makefile, it tries
+to load the \fBlibreadline\fP library dynamically whenever the \fB\-be\fP option is
+used without command line arguments. If successful, it uses the readline()
+function, which provides extensive line\-editing facilities, for reading the
+test data. A line history is supported.
+.sp
+Long expansion expressions can be split over several lines by using backslash
+continuations. As in Exim's runtime configuration, white space at the start of
+continuation lines is ignored. Each argument or data line is passed through the
+string expansion mechanism, and the result is output. Variable values from the
+configuration file (for example, \fI$qualify_domain\fP) are available, but no
+message\-specific values (such as \fI$message_exim_id\fP) are set, because no message
+is being processed (but see \fB\-bem\fP and \fB\-Mset\fP).
+.sp
+\fBNote\fP: If you use this mechanism to test lookups, and you change the data
+files or databases you are using, you must exit and restart Exim before trying
+the same lookup again. Otherwise, because each Exim process caches the results
+of lookups, you will just get the same result as before.
+.sp
+Macro processing is done on lines before string\-expansion: new macros can be
+defined and macros will be expanded.
+Because macros in the config file are often used for secrets, those are only
+available to admin users.
+.TP 10
+\fB\-bem\fP <\fIfilename\fP>
+This option operates like \fB\-be\fP except that it must be followed by the name
+of a file. For example:
+.sp
+  exim \-bem /tmp/testmessage
+.sp
+The file is read as a message (as if receiving a locally\-submitted non\-SMTP
+message) before any of the test expansions are done. Thus, message\-specific
+variables such as \fI$message_size\fP and \fI$header_from:\fP are available. However,
+no \fIReceived:\fP header is added to the message. If the \fB\-t\fP option is set,
+recipients are read from the headers in the normal way, and are shown in the
+\fI$recipients\fP variable. Note that recipients cannot be given on the command
+line, because further arguments are taken as strings to expand (just like
+\fB\-be\fP).
+.TP 10
+\fB\-bF\fP <\fIfilename\fP>
+This option is the same as \fB\-bf\fP except that it assumes that the filter being
+tested is a system filter. The additional commands that are available only in
+system filters are recognized.
+.TP 10
+\fB\-bf\fP <\fIfilename\fP>
+This option runs Exim in user filter testing mode; the file is the filter file
+to be tested, and a test message must be supplied on the standard input. If
+there are no message\-dependent tests in the filter, an empty file can be
+supplied.
+.sp
+If you want to test a system filter file, use \fB\-bF\fP instead of \fB\-bf\fP. You
+can use both \fB\-bF\fP and \fB\-bf\fP on the same command, in order to test a system
+filter and a user filter in the same run. For example:
+.sp
+  exim \-bF /system/filter \-bf /user/filter </test/message
+.sp
+This is helpful when the system filter adds header lines or sets filter
+variables that are used by the user filter.
+.sp
+If the test filter file does not begin with one of the special lines
+.sp
+  # Exim filter
+  # Sieve filter
+.sp
+it is taken to be a normal .forward file, and is tested for validity under
+that interpretation.
+.sp
+The result of an Exim command that uses \fB\-bf\fP, provided no errors are
+detected, is a list of the actions that Exim would try to take if presented
+with the message for real. More details of filter testing are given in the
+separate document entitled \fIExim's interfaces to mail filtering\fP.
+.sp
+When testing a filter file,
+the envelope sender can be set by the \fB\-f\fP option,
+or by a "From " line at the start of the test message. Various parameters
+that would normally be taken from the envelope recipient address of the message
+can be set by means of additional command line options (see the next four
+options).
+.TP 10
+\fB\-bfd\fP <\fIdomain\fP>
+This sets the domain of the recipient address when a filter file is being
+tested by means of the \fB\-bf\fP option. The default is the value of
+\fI$qualify_domain\fP.
+.TP 10
+\fB\-bfl\fP <\fIlocal part\fP>
+This sets the local part of the recipient address when a filter file is being
+tested by means of the \fB\-bf\fP option. The default is the username of the
+process that calls Exim. A local part should be specified with any prefix or
+suffix stripped, because that is how it appears to the filter when a message is
+actually being delivered.
+.TP 10
+\fB\-bfp\fP <\fIprefix\fP>
+This sets the prefix of the local part of the recipient address when a filter
+file is being tested by means of the \fB\-bf\fP option. The default is an empty
+prefix.
+.TP 10
+\fB\-bfs\fP <\fIsuffix\fP>
+This sets the suffix of the local part of the recipient address when a filter
+file is being tested by means of the \fB\-bf\fP option. The default is an empty
+suffix.
+.TP 10
+\fB\-bh\fP <\fIIP address\fP>
+This option runs a fake SMTP session as if from the given IP address, using the
+standard input and output. The IP address may include a port number at the end,
+after a full stop. For example:
+.sp
+  exim \-bh 10.9.8.7.1234
+  exim \-bh fe80::a00:20ff:fe86:a061.5678
+.sp
+When an IPv6 address is given, it is converted into canonical form. In the case
+of the second example above, the value of \fI$sender_host_address\fP after
+conversion to the canonical form is
+fe80:0000:0000:0a00:20ff:fe86:a061.5678.
+.sp
+Comments as to what is going on are written to the standard error file. These
+include lines beginning with "LOG" for anything that would have been logged.
+This facility is provided for testing configuration options for incoming
+messages, to make sure they implement the required policy. For example, you can
+test your relay controls using \fB\-bh\fP.
+.sp
+\fBWarning 1\fP:
+You can test features of the configuration that rely on ident (RFC 1413)
+information by using the \fB\-oMt\fP option. However, Exim cannot actually perform
+an ident callout when testing using \fB\-bh\fP because there is no incoming SMTP
+connection.
+.sp
+\fBWarning 2\fP: Address verification callouts
+are also skipped when testing using \fB\-bh\fP. If you want these callouts to
+occur, use \fB\-bhc\fP instead.
+.sp
+Messages supplied during the testing session are discarded, and nothing is
+written to any of the real log files. There may be pauses when DNS (and other)
+lookups are taking place, and of course these may time out. The \fB\-oMi\fP option
+can be used to specify a specific IP interface and port if this is important,
+and \fB\-oMaa\fP and \fB\-oMai\fP can be used to set parameters as if the SMTP
+session were authenticated.
+.sp
+The \fIexim_checkaccess\fP utility is a "packaged" version of \fB\-bh\fP whose
+output just states whether a given recipient address from a given host is
+acceptable or not.
+.sp
+Features such as authentication and encryption, where the client input is not
+plain text, cannot easily be tested with \fB\-bh\fP. Instead, you should use a
+specialized SMTP test program such as
+\fBswaks\fP.
+.TP 10
+\fB\-bhc\fP <\fIIP address\fP>
+This option operates in the same way as \fB\-bh\fP, except that address
+verification callouts are performed if required. This includes consulting and
+updating the callout cache database.
+.TP 10
+\fB\-bi\fP
+Sendmail interprets the \fB\-bi\fP option as a request to rebuild its alias file.
+Exim does not have the concept of a single alias file, and so it cannot mimic
+this behaviour. However, calls to /usr/lib/sendmail with the \fB\-bi\fP option
+tend to appear in various scripts such as NIS make files, so the option must be
+recognized.
+.sp
+If \fB\-bi\fP is encountered, the command specified by the \fBbi_command\fP
+configuration option is run, under the uid and gid of the caller of Exim. If
+the \fB\-oA\fP option is used, its value is passed to the command as an argument.
+The command set by \fBbi_command\fP may not contain arguments. The command can
+use the \fIexim_dbmbuild\fP utility, or some other means, to rebuild alias files
+if this is required. If the \fBbi_command\fP option is not set, calling Exim with
+\fB\-bi\fP is a no\-op.
+.TP 10
+\fB\-bI:help\fP
+We shall provide various options starting \-bI: for querying Exim for
+information.  The output of many of these will be intended for machine
+consumption.  This one is not.  The \fB\-bI:help\fP option asks Exim for a
+synopsis of supported options beginning \-bI:.  Use of any of these
+options shall cause Exim to exit after producing the requested output.
+.TP 10
+\fB\-bI:dscp\fP
+This option causes Exim to emit an alphabetically sorted list of all
+recognised DSCP names.
+.TP 10
+\fB\-bI:sieve\fP
+This option causes Exim to emit an alphabetically sorted list of all supported
+Sieve protocol extensions on stdout, one per line.  This is anticipated to be
+useful for ManageSieve (RFC 5804) implementations, in providing that protocol's
+SIEVE capability response line.  As the precise list may depend upon
+compile\-time build options, which this option will adapt to, this is the only
+way to guarantee a correct response.
+.TP 10
+\fB\-bm\fP
+This option runs an Exim receiving process that accepts an incoming,
+locally\-generated message on the standard input. The recipients are given as the
+command arguments (except when \fB\-t\fP is also present \- see below). Each
+argument can be a comma\-separated list of RFC 2822 addresses. This is the
+default option for selecting the overall action of an Exim call; it is assumed
+if no other conflicting option is present.
+.sp
+If any addresses in the message are unqualified (have no domain), they are
+qualified by the values of the \fBqualify_domain\fP or \fBqualify_recipient\fP
+options, as appropriate. The \fB\-bnq\fP option (see below) provides a way of
+suppressing this for special cases.
+.sp
+Policy checks on the contents of local messages can be enforced by means of
+the non\-SMTP ACL.
+.sp
+The return code is zero if the message is successfully accepted. Otherwise, the
+action is controlled by the \fB\-oe\fP\fIx\fP option setting \- see below.
+.sp
+The format
+of the message must be as defined in RFC 2822, except that, for
+compatibility with Sendmail and Smail, a line in one of the forms
+.sp
+  From sender Fri Jan  5 12:55 GMT 1997
+  From sender Fri, 5 Jan 97 12:55:01
+.sp
+(with the weekday optional, and possibly with additional text after the date)
+is permitted to appear at the start of the message. There appears to be no
+authoritative specification of the format of this line. Exim recognizes it by
+matching against the regular expression defined by the \fBuucp_from_pattern\fP
+option, which can be changed if necessary.
+.sp
+The specified sender is treated as if it were given as the argument to the
+\fB\-f\fP option, but if a \fB\-f\fP option is also present, its argument is used in
+preference to the address taken from the message. The caller of Exim must be a
+trusted user for the sender of a message to be set in this way.
+.TP 10
+\fB\-bmalware\fP <\fIfilename\fP>
+This debugging option causes Exim to scan the given file or directory
+(depending on the used scanner interface),
+using the malware scanning framework.  The option of \fBav_scanner\fP influences
+this option, so if \fBav_scanner\fP's value is dependent upon an expansion then
+the expansion should have defaults which apply to this invocation.  ACLs are
+not invoked, so if \fBav_scanner\fP references an ACL variable then that variable
+will never be populated and \fB\-bmalware\fP will fail.
+.sp
+Exim will have changed working directory before resolving the filename, so
+using fully qualified pathnames is advisable.  Exim will be running as the Exim
+user when it tries to open the file, rather than as the invoking user.
+This option requires admin privileges.
+.sp
+The \fB\-bmalware\fP option will not be extended to be more generally useful,
+there are better tools for file\-scanning.  This option exists to help
+administrators verify their Exim and AV scanner configuration.
+.TP 10
+\fB\-bnq\fP
+By default, Exim automatically qualifies unqualified addresses (those
+without domains) that appear in messages that are submitted locally (that
+is, not over TCP/IP). This qualification applies both to addresses in
+envelopes, and addresses in header lines. Sender addresses are qualified using
+\fBqualify_domain\fP, and recipient addresses using \fBqualify_recipient\fP (which
+defaults to the value of \fBqualify_domain\fP).
+.sp
+Sometimes, qualification is not wanted. For example, if \fB\-bS\fP (batch SMTP) is
+being used to re\-submit messages that originally came from remote hosts after
+content scanning, you probably do not want to qualify unqualified addresses in
+header lines. (Such lines will be present only if you have not enabled a header
+syntax check in the appropriate ACL.)
+.sp
+The \fB\-bnq\fP option suppresses all qualification of unqualified addresses in
+messages that originate on the local host. When this is used, unqualified
+addresses in the envelope provoke errors (causing message rejection) and
+unqualified addresses in header lines are left alone.
+.TP 10
+\fB\-bP\fP
+If this option is given with no arguments, it causes the values of all Exim's
+main configuration options to be written to the standard output. The values
+of one or more specific options can be requested by giving their names as
+arguments, for example:
+.sp
+  exim \-bP qualify_domain hold_domains
+.sp
+However, any option setting that is preceded by the word "hide" in the
+configuration file is not shown in full, except to an admin user. For other
+users, the output is as in this example:
+.sp
+  mysql_servers = <value not displayable>
+.sp
+If \fBconfig\fP is given as an argument, the config is
+output, as it was parsed, any include file resolved, any comment removed.
+.sp
+If \fBconfig_file\fP is given as an argument, the name of the runtime
+configuration file is output. (\fBconfigure_file\fP works too, for
+backward compatibility.)
+If a list of configuration files was supplied, the value that is output here
+is the name of the file that was actually used.
+.sp
+If the \fB\-n\fP flag is given, then for most modes of \fB\-bP\fP operation the
+name will not be output.
+.sp
+If \fBlog_file_path\fP or \fBpid_file_path\fP are given, the names of the
+directories where log files and daemon pid files are written are output,
+respectively. If these values are unset, log files are written in a
+sub\-directory of the spool directory called \fBlog\fP, and the pid file is
+written directly into the spool directory.
+.sp
+If \fB\-bP\fP is followed by a name preceded by +, for example,
+.sp
+  exim \-bP +local_domains
+.sp
+it searches for a matching named list of any type (domain, host, address, or
+local part) and outputs what it finds.
+.sp
+If one of the words \fBrouter\fP, \fBtransport\fP, or \fBauthenticator\fP is given,
+followed by the name of an appropriate driver instance, the option settings for
+that driver are output. For example:
+.sp
+  exim \-bP transport local_delivery
+.sp
+The generic driver options are output first, followed by the driver's private
+options. A list of the names of drivers of a particular type can be obtained by
+using one of the words \fBrouter_list\fP, \fBtransport_list\fP, or
+\fBauthenticator_list\fP, and a complete list of all drivers with their option
+settings can be obtained by using \fBrouters\fP, \fBtransports\fP, or
+\fBauthenticators\fP.
+.sp
+If \fBenvironment\fP is given as an argument, the set of environment
+variables is output, line by line. Using the \fB\-n\fP flag suppresses the value of the
+variables.
+.sp
+If invoked by an admin user, then \fBmacro\fP, \fBmacro_list\fP and \fBmacros\fP
+are available, similarly to the drivers.  Because macros are sometimes used
+for storing passwords, this option is restricted.
+The output format is one item per line.
+For the "\-bP macro <name>" form, if no such macro is found
+the exit status will be nonzero.
+.TP 10
+\fB\-bp\fP
+This option requests a listing of the contents of the mail queue on the
+standard output. If the \fB\-bp\fP option is followed by a list of message ids,
+just those messages are listed. By default, this option can be used only by an
+admin user. However, the \fBqueue_list_requires_admin\fP option can be set false
+to allow any user to see the queue.
+.sp
+Each message in the queue is displayed as in the following example:
+.sp
+  25m  2.9K 0t5C6f\-0000c8\-00 <alice@wonderland.fict.example>
+            red.king@looking\-glass.fict.example
+            <other addresses>
+.sp
+The first line contains the length of time the message has been in the queue
+(in this case 25 minutes), the size of the message (2.9K), the unique local
+identifier for the message, and the message sender, as contained in the
+envelope. For bounce messages, the sender address is empty, and appears as
+"<>". If the message was submitted locally by an untrusted user who overrode
+the default sender address, the user's login name is shown in parentheses
+before the sender address.
+.sp
+If the message is frozen (attempts to deliver it are suspended) then the text
+"*** frozen ***" is displayed at the end of this line.
+.sp
+The recipients of the message (taken from the envelope, not the headers) are
+displayed on subsequent lines. Those addresses to which the message has already
+been delivered are marked with the letter D. If an original address gets
+expanded into several addresses via an alias or forward file, the original is
+displayed with a D only when deliveries for all of its child addresses are
+complete.
+.TP 10
+\fB\-bpa\fP
+This option operates like \fB\-bp\fP, but in addition it shows delivered addresses
+that were generated from the original top level address(es) in each message by
+alias or forwarding operations. These addresses are flagged with "+D" instead
+of just "D".
+.TP 10
+\fB\-bpc\fP
+This option counts the number of messages in the queue, and writes the total
+to the standard output. It is restricted to admin users, unless
+\fBqueue_list_requires_admin\fP is set false.
+.TP 10
+\fB\-bpr\fP
+This option operates like \fB\-bp\fP, but the output is not sorted into
+chronological order of message arrival. This can speed it up when there are
+lots of messages in the queue, and is particularly useful if the output is
+going to be post\-processed in a way that doesn't need the sorting.
+.TP 10
+\fB\-bpra\fP
+This option is a combination of \fB\-bpr\fP and \fB\-bpa\fP.
+.TP 10
+\fB\-bpru\fP
+This option is a combination of \fB\-bpr\fP and \fB\-bpu\fP.
+.TP 10
+\fB\-bpu\fP
+This option operates like \fB\-bp\fP but shows only undelivered top\-level
+addresses for each message displayed. Addresses generated by aliasing or
+forwarding are not shown, unless the message was deferred after processing by a
+router with the \fBone_time\fP option set.
+.TP 10
+\fB\-brt\fP
+This option is for testing retry rules, and it must be followed by up to three
+arguments. It causes Exim to look for a retry rule that matches the values
+and to write it to the standard output. For example:
+.sp
+  exim \-brt bach.comp.mus.example
+  Retry rule: *.comp.mus.example  F,2h,15m; F,4d,30m;
+.sp
+ The first
+argument, which is required, can be a complete address in the form
+\fIlocal_part@domain\fP, or it can be just a domain name. If the second argument
+contains a dot, it is interpreted as an optional second domain name; if no
+retry rule is found for the first argument, the second is tried. This ties in
+with Exim's behaviour when looking for retry rules for remote hosts \- if no
+rule is found that matches the host, one that matches the mail domain is
+sought. Finally, an argument that is the name of a specific delivery error, as
+used in setting up retry rules, can be given. For example:
+.sp
+  exim \-brt haydn.comp.mus.example quota_3d
+  Retry rule: *@haydn.comp.mus.example quota_3d  F,1h,15m
+.TP 10
+\fB\-brw\fP
+This option is for testing address rewriting rules, and it must be followed by
+a single argument, consisting of either a local part without a domain, or a
+complete address with a fully qualified domain. Exim outputs how this address
+would be rewritten for each possible place it might appear.
+.TP 10
+\fB\-bS\fP
+This option is used for batched SMTP input, which is an alternative interface
+for non\-interactive local message submission. A number of messages can be
+submitted in a single run. However, despite its name, this is not really SMTP
+input. Exim reads each message's envelope from SMTP commands on the standard
+input, but generates no responses. If the caller is trusted, or
+\fBuntrusted_set_sender\fP is set, the senders in the SMTP MAIL commands are
+believed; otherwise the sender is always the caller of Exim.
+.sp
+The message itself is read from the standard input, in SMTP format (leading
+dots doubled), terminated by a line containing just a single dot. An error is
+provoked if the terminating dot is missing. A further message may then follow.
+.sp
+As for other local message submissions, the contents of incoming batch SMTP
+messages can be checked using the non\-SMTP ACL.
+Unqualified addresses are automatically qualified using \fBqualify_domain\fP and
+\fBqualify_recipient\fP, as appropriate, unless the \fB\-bnq\fP option is used.
+.sp
+Some other SMTP commands are recognized in the input. HELO and EHLO act
+as RSET; VRFY, EXPN, ETRN, and HELP act as NOOP;
+QUIT quits, ignoring the rest of the standard input.
+.sp
+If any error is encountered, reports are written to the standard output and
+error streams, and Exim gives up immediately. The return code is 0 if no error
+was detected; it is 1 if one or more messages were accepted before the error
+was detected; otherwise it is 2.
+.sp
+.TP 10
+\fB\-bs\fP
+This option causes Exim to accept one or more messages by reading SMTP commands
+on the standard input, and producing SMTP replies on the standard output. SMTP
+policy controls, as defined in ACLs are applied.
+Some user agents use this interface as a way of passing locally\-generated
+messages to the MTA.
+.sp
+In
+this usage, if the caller of Exim is trusted, or \fBuntrusted_set_sender\fP is
+set, the senders of messages are taken from the SMTP MAIL commands.
+Otherwise the content of these commands is ignored and the sender is set up as
+the calling user. Unqualified addresses are automatically qualified using
+\fBqualify_domain\fP and \fBqualify_recipient\fP, as appropriate, unless the
+\fB\-bnq\fP option is used.
+.sp
+The
+\fB\-bs\fP option is also used to run Exim from \fIinetd\fP, as an alternative to
+using a listening daemon. Exim can distinguish the two cases by checking
+whether the standard input is a TCP/IP socket. When Exim is called from
+\fIinetd\fP, the source of the mail is assumed to be remote, and the comments
+above concerning senders and qualification do not apply. In this situation,
+Exim behaves in exactly the same way as it does when receiving a message via
+the listening daemon.
+.TP 10
+\fB\-bt\fP
+This option runs Exim in address testing mode, in which each argument is taken
+as a recipient address to be tested for deliverability. The results are
+written to the standard output. If a test fails, and the caller is not an admin
+user, no details of the failure are output, because these might contain
+sensitive information such as usernames and passwords for database lookups.
+.sp
+If no arguments are given, Exim runs in an interactive manner, prompting with a
+right angle bracket for addresses to be tested.
+.sp
+Unlike the \fB\-be\fP test option, you cannot arrange for Exim to use the
+readline() function, because it is running as \fIroot\fP and there are
+security issues.
+.sp
+Each address is handled as if it were the recipient address of a message
+(compare the \fB\-bv\fP option). It is passed to the routers and the result is
+written to the standard output. However, any router that has
+\fBno_address_test\fP set is bypassed. This can make \fB\-bt\fP easier to use for
+genuine routing tests if your first router passes everything to a scanner
+program.
+.sp
+The return code is 2 if any address failed outright; it is 1 if no address
+failed outright but at least one could not be resolved for some reason. Return
+code 0 is given only when all addresses succeed.
+.sp
+\fBNote\fP: When actually delivering a message, Exim removes duplicate recipient
+addresses after routing is complete, so that only one delivery takes place.
+This does not happen when testing with \fB\-bt\fP; the full results of routing are
+always shown.
+.sp
+\fBWarning\fP: \fB\-bt\fP can only do relatively simple testing. If any of the
+routers in the configuration makes any tests on the sender address of a
+message,
+you can use the \fB\-f\fP option to set an appropriate sender when running
+\fB\-bt\fP tests. Without it, the sender is assumed to be the calling user at the
+default qualifying domain. However, if you have set up (for example) routers
+whose behaviour depends on the contents of an incoming message, you cannot test
+those conditions using \fB\-bt\fP. The \fB\-N\fP option provides a possible way of
+doing such tests.
+.TP 10
+\fB\-bV\fP
+This option causes Exim to write the current version number, compilation
+number, and compilation date of the \fIexim\fP binary to the standard output.
+It also lists the DBM library that is being used, the optional modules (such as
+specific lookup types), the drivers that are included in the binary, and the
+name of the runtime configuration file that is in use.
+.sp
+As part of its operation, \fB\-bV\fP causes Exim to read and syntax check its
+configuration file. However, this is a static check only. It cannot check
+values that are to be expanded. For example, although a misspelt ACL verb is
+detected, an error in the verb's arguments is not. You cannot rely on \fB\-bV\fP
+alone to discover (for example) all the typos in the configuration; some
+realistic testing is needed. The \fB\-bh\fP and \fB\-N\fP options provide more
+dynamic testing facilities.
+.TP 10
+\fB\-bv\fP
+This option runs Exim in address verification mode, in which each argument is
+taken as a recipient address to be verified by the routers. (This does
+not involve any verification callouts). During normal operation, verification
+happens mostly as a consequence processing a \fBverify\fP condition in an ACL. If you want to test an entire ACL, possibly
+including callouts, see the \fB\-bh\fP and \fB\-bhc\fP options.
+.sp
+If verification fails, and the caller is not an admin user, no details of the
+failure are output, because these might contain sensitive information such as
+usernames and passwords for database lookups.
+.sp
+If no arguments are given, Exim runs in an interactive manner, prompting with a
+right angle bracket for addresses to be verified.
+.sp
+Unlike the \fB\-be\fP test option, you cannot arrange for Exim to use the
+readline() function, because it is running as \fIexim\fP and there are
+security issues.
+.sp
+Verification differs from address testing (the \fB\-bt\fP option) in that routers
+that have \fBno_verify\fP set are skipped, and if the address is accepted by a
+router that has \fBfail_verify\fP set, verification fails. The address is
+verified as a recipient if \fB\-bv\fP is used; to test verification for a sender
+address, \fB\-bvs\fP should be used.
+.sp
+If the \fB\-v\fP option is not set, the output consists of a single line for each
+address, stating whether it was verified or not, and giving a reason in the
+latter case. Without \fB\-v\fP, generating more than one address by redirection
+causes verification to end successfully, without considering the generated
+addresses. However, if just one address is generated, processing continues,
+and the generated address must verify successfully for the overall verification
+to succeed.
+.sp
+When \fB\-v\fP is set, more details are given of how the address has been handled,
+and in the case of address redirection, all the generated addresses are also
+considered. Verification may succeed for some and fail for others.
+.sp
+The
+return code is 2 if any address failed outright; it is 1 if no address
+failed outright but at least one could not be resolved for some reason. Return
+code 0 is given only when all addresses succeed.
+.sp
+If any of the routers in the configuration makes any tests on the sender
+address of a message, you should use the \fB\-f\fP option to set an appropriate
+sender when running \fB\-bv\fP tests. Without it, the sender is assumed to be the
+calling user at the default qualifying domain.
+.TP 10
+\fB\-bvs\fP
+This option acts like \fB\-bv\fP, but verifies the address as a sender rather
+than a recipient address. This affects any rewriting and qualification that
+might happen.
+.TP 10
+\fB\-bw\fP
+This option runs Exim as a daemon, awaiting incoming SMTP connections,
+similarly to the \fB\-bd\fP option.  All port specifications on the command\-line
+and in the configuration file are ignored.  Queue\-running may not be specified.
+.sp
+In this mode, Exim expects to be passed a socket as fd 0 (stdin) which is
+listening for connections.  This permits the system to start up and have
+inetd (or equivalent) listen on the SMTP ports, starting an Exim daemon for
+each port only when the first connection is received.
+.sp
+If the option is given as \fB\-bw\fP<\fItime\fP> then the time is a timeout, after
+which the daemon will exit, which should cause inetd to listen once more.
+.TP 10
+\fB\-C\fP <\fIfilelist\fP>
+This option causes Exim to find the runtime configuration file from the given
+list instead of from the list specified by the CONFIGURE_FILE
+compile\-time setting. Usually, the list will consist of just a single filename,
+but it can be a colon\-separated list of names. In this case, the first
+file that exists is used. Failure to open an existing file stops Exim from
+proceeding any further along the list, and an error is generated.
+.sp
+When this option is used by a caller other than root, and the list is different
+from the compiled\-in list, Exim gives up its root privilege immediately, and
+runs with the real and effective uid and gid set to those of the caller.
+However, if a TRUSTED_CONFIG_LIST file is defined in Local/Makefile, that
+file contains a list of full pathnames, one per line, for configuration files
+which are trusted. Root privilege is retained for any configuration file so
+listed, as long as the caller is the Exim user (or the user specified in the
+CONFIGURE_OWNER option, if any), and as long as the configuration file is
+not writeable by inappropriate users or groups.
+.sp
+Leaving TRUSTED_CONFIG_LIST unset precludes the possibility of testing a
+configuration using \fB\-C\fP right through message reception and delivery,
+even if the caller is root. The reception works, but by that time, Exim is
+running as the Exim user, so when it re\-executes to regain privilege for the
+delivery, the use of \fB\-C\fP causes privilege to be lost. However, root can
+test reception and delivery using two separate commands (one to put a message
+in the queue, using \fB\-odq\fP, and another to do the delivery, using \fB\-M\fP).
+.sp
+If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a
+prefix string with which any file named in a \fB\-C\fP command line option
+must start. In addition, the filename must not contain the sequence /../.
+However, if the value of the \fB\-C\fP option is identical to the value of
+CONFIGURE_FILE in Local/Makefile, Exim ignores \fB\-C\fP and proceeds as
+usual. There is no default setting for ALT_CONFIG_PREFIX; when it is
+unset, any filename can be used with \fB\-C\fP.
+.sp
+ALT_CONFIG_PREFIX can be used to confine alternative configuration files
+to a directory to which only root has access. This prevents someone who has
+broken into the Exim account from running a privileged Exim with an arbitrary
+configuration file.
+.sp
+The \fB\-C\fP facility is useful for ensuring that configuration files are
+syntactically correct, but cannot be used for test deliveries, unless the
+caller is privileged, or unless it is an exotic configuration that does not
+require privilege. No check is made on the owner or group of the files
+specified by this option.
+.TP 10
+\fB\-D\fP<\fImacro\fP>=<\fIvalue\fP>
+This option can be used to override macro definitions in the configuration file. However, like \fB\-C\fP, if it is used by an
+unprivileged caller, it causes Exim to give up its root privilege.
+If DISABLE_D_OPTION is defined in Local/Makefile, the use of \fB\-D\fP is
+completely disabled, and its use causes an immediate error exit.
+.sp
+If WHITELIST_D_MACROS is defined in Local/Makefile then it should be a
+colon\-separated list of macros which are considered safe and, if \fB\-D\fP only
+supplies macros from this list, and the values are acceptable, then Exim will
+not give up root privilege if the caller is root, the Exim run\-time user, or
+the CONFIGURE_OWNER, if set.  This is a transition mechanism and is expected
+to be removed in the future.  Acceptable values for the macros satisfy the
+regexp: ^[A\-Za\-z0\-9_/.\-]*$
+.sp
+The entire option (including equals sign if present) must all be within one
+command line item. \fB\-D\fP can be used to set the value of a macro to the empty
+string, in which case the equals sign is optional. These two commands are
+synonymous:
+.sp
+  exim \-DABC  ...
+  exim \-DABC= ...
+.sp
+To include spaces in a macro definition item, quotes must be used. If you use
+quotes, spaces are permitted around the macro name and the equals sign. For
+example:
+.sp
+  exim '\-D ABC = something' ...
+.sp
+\fB\-D\fP may be repeated up to 10 times on a command line.
+Only macro names up to 22 letters long can be set.
+.TP 10
+\fB\-d\fP<\fIdebug options\fP>
+This option causes debugging information to be written to the standard
+error stream. It is restricted to admin users because debugging output may show
+database queries that contain password information. Also, the details of users'
+filter files should be protected. If a non\-admin user uses \fB\-d\fP, Exim
+writes an error message to the standard error stream and exits with a non\-zero
+return code.
+.sp
+When \fB\-d\fP is used, \fB\-v\fP is assumed. If \fB\-d\fP is given on its own, a lot of
+standard debugging data is output. This can be reduced, or increased to include
+some more rarely needed information, by directly following \fB\-d\fP with a string
+made up of names preceded by plus or minus characters. These add or remove sets
+of debugging data, respectively. For example, \fB\-d+filter\fP adds filter
+debugging, whereas \fB\-d\-all+filter\fP selects only filter debugging. Note that
+no spaces are allowed in the debug setting. The available debugging categories
+are:
+    acl
+ACL interpretation
+    auth
+authenticators
+    deliver
+general delivery logic
+    dns
+DNS lookups (see also resolver)
+    dnsbl
+DNS black list (aka RBL) code
+    exec
+arguments for execv() calls
+    expand
+detailed debugging for string expansions
+    filter
+filter handling
+    hints_lookup
+hints data lookups
+    host_lookup
+all types of name\-to\-IP address handling
+    ident
+ident lookup
+    interface
+lists of local interfaces
+    lists
+matching things in lists
+    load
+system load checks
+    local_scan
+can be used by local_scan()
+    lookup
+general lookup code and all lookups
+    memory
+memory handling
+    noutf8
+modifier: avoid UTF\-8 line\-drawing
+    pid
+modifier: add pid to debug output lines
+    process_info
+setting info for the process log
+    queue_run
+queue runs
+    receive
+general message reception logic
+    resolver
+turn on the DNS resolver's debugging output
+    retry
+retry handling
+    rewrite
+address rewriting"
+    route
+address routing
+    timestamp
+modifier: add timestamp to debug output lines
+    tls
+TLS logic
+    transport
+transports
+    uid
+changes of uid/gid and looking up uid/gid
+    verify
+address verification logic
+    all
+almost all of the above (see below), and also \fB\-v\fP
+.sp
+The all option excludes memory when used as +all, but includes it
+for \-all. The reason for this is that +all is something that people
+tend to use when generating debug output for Exim maintainers. If +memory
+is included, an awful lot of output that is very rarely of interest is
+generated, so it now has to be explicitly requested. However, \-all does
+turn everything off.
+.sp
+The resolver option produces output only if the DNS resolver was compiled
+with DEBUG enabled. This is not the case in some operating systems. Also,
+unfortunately, debugging output from the DNS resolver is written to stdout
+rather than stderr.
+.sp
+The default (\fB\-d\fP with no argument) omits expand, filter,
+interface, load, memory, pid, resolver, and timestamp.
+However, the pid selector is forced when debugging is turned on for a
+daemon, which then passes it on to any re\-executed Exims. Exim also
+automatically adds the pid to debug lines when several remote deliveries are
+run in parallel.
+.sp
+The timestamp selector causes the current time to be inserted at the start
+of all debug output lines. This can be useful when trying to track down delays
+in processing.
+.sp
+The noutf8 selector disables the use of
+UTF\-8 line\-drawing characters to group related information.
+When disabled. ascii\-art is used instead.
+Using the +all option does not set this modifier,
+.sp
+If the \fBdebug_print\fP option is set in any driver, it produces output whenever
+any debugging is selected, or if \fB\-v\fP is used.
+.TP 10
+\fB\-dd\fP<\fIdebug options\fP>
+This option behaves exactly like \fB\-d\fP except when used on a command that
+starts a daemon process. In that case, debugging is turned off for the
+subprocesses that the daemon creates. Thus, it is useful for monitoring the
+behaviour of the daemon without creating as much output as full debugging does.
+.TP 10
+\fB\-dropcr\fP
+This is an obsolete option that is now a no\-op. It used to affect the way Exim
+handled CR and LF characters in incoming messages.
+.TP 10
+\fB\-E\fP
+This option specifies that an incoming message is a locally\-generated delivery
+failure report. It is used internally by Exim when handling delivery failures
+and is not intended for external use. Its only effect is to stop Exim
+generating certain messages to the postmaster, as otherwise message cascades
+could occur in some situations. As part of the same option, a message id may
+follow the characters \fB\-E\fP. If it does, the log entry for the receipt of the
+new message contains the id, following "R=", as a cross\-reference.
+.TP 10
+\fB\-e\fP\fIx\fP
+There are a number of Sendmail options starting with \fB\-oe\fP which seem to be
+called by various programs without the leading \fBo\fP in the option. For
+example, the \fBvacation\fP program uses \fB\-eq\fP. Exim treats all options of the
+form \fB\-e\fP\fIx\fP as synonymous with the corresponding \fB\-oe\fP\fIx\fP options.
+.TP 10
+\fB\-F\fP <\fIstring\fP>
+This option sets the sender's full name for use when a locally\-generated
+message is being accepted. In the absence of this option, the user's \fIgecos\fP
+entry from the password data is used. As users are generally permitted to alter
+their \fIgecos\fP entries, no security considerations are involved. White space
+between \fB\-F\fP and the <\fIstring\fP> is optional.
+.TP 10
+\fB\-f\fP <\fIaddress\fP>
+This option sets the address of the envelope sender of a locally\-generated
+message (also known as the return path). The option can normally be used only
+by a trusted user, but \fBuntrusted_set_sender\fP can be set to allow untrusted
+users to use it.
+.sp
+Processes running as root or the Exim user are always trusted. Other
+trusted users are defined by the \fBtrusted_users\fP or \fBtrusted_groups\fP
+options. In the absence of \fB\-f\fP, or if the caller is not trusted, the sender
+of a local message is set to the caller's login name at the default qualify
+domain.
+.sp
+There is one exception to the restriction on the use of \fB\-f\fP: an empty sender
+can be specified by any user, trusted or not, to create a message that can
+never provoke a bounce. An empty sender can be specified either as an empty
+string, or as a pair of angle brackets with nothing between them, as in these
+examples of shell commands:
+.sp
+  exim \-f '<>' user@domain
+  exim \-f "" user@domain
+.sp
+In addition, the use of \fB\-f\fP is not restricted when testing a filter file
+with \fB\-bf\fP or when testing or verifying addresses using the \fB\-bt\fP or
+\fB\-bv\fP options.
+.sp
+Allowing untrusted users to change the sender address does not of itself make
+it possible to send anonymous mail. Exim still checks that the \fIFrom:\fP header
+refers to the local user, and if it does not, it adds a \fISender:\fP header,
+though this can be overridden by setting \fBno_local_from_check\fP.
+.sp
+White
+space between \fB\-f\fP and the <\fIaddress\fP> is optional (that is, they can be
+given as two arguments or one combined argument). The sender of a
+locally\-generated message can also be set (when permitted) by an initial
+"From " line in the message \- see the description of \fB\-bm\fP above \- but
+if \fB\-f\fP is also present, it overrides "From ".
+.TP 10
+\fB\-G\fP
+This option is equivalent to an ACL applying:
+.sp
+  control = suppress_local_fixups
+.sp
+for every message received.  Note that Sendmail will complain about such
+bad formatting, where Exim silently just does not fix it up.  This may change
+in future.
+.sp
+As this affects audit information, the caller must be a trusted user to use
+this option.
+.TP 10
+\fB\-h\fP <\fInumber\fP>
+This option is accepted for compatibility with Sendmail, but has no effect. (In
+Sendmail it overrides the "hop count" obtained by counting \fIReceived:\fP
+headers.)
+.TP 10
+\fB\-i\fP
+This option, which has the same effect as \fB\-oi\fP, specifies that a dot on a
+line by itself should not terminate an incoming, non\-SMTP message.
+Solaris 2.4 (SunOS 5.4) Sendmail has a similar \fB\-i\fP processing option
+\fBhttps://docs.oracle.com/cd/E19457\-01/801\-6680\-1M/801\-6680\-1M.pdf\fP,
+p. 1M\-529), and therefore a \fB\-oi\fP command line option, which both are used
+by its \fImailx\fP command.
+.TP 10
+\fB\-L\fP <\fItag\fP>
+This option is equivalent to setting \fBsyslog_processname\fP in the config
+file and setting \fBlog_file_path\fP to syslog.
+Its use is restricted to administrators.  The configuration file has to be
+read and parsed, to determine access rights, before this is set and takes
+effect, so early configuration file errors will not honour this flag.
+.sp
+The tag should not be longer than 32 characters.
+.TP 10
+\fB\-M\fP <\fImessage id\fP> <\fImessage id\fP> ...
+This option requests Exim to run a delivery attempt on each message in turn. If
+any of the messages are frozen, they are automatically thawed before the
+delivery attempt. The settings of \fBqueue_domains\fP, \fBqueue_smtp_domains\fP,
+and \fBhold_domains\fP are ignored.
+.sp
+Retry
+hints for any of the addresses are overridden \- Exim tries to deliver even if
+the normal retry time has not yet been reached. This option requires the caller
+to be an admin user. However, there is an option called \fBprod_requires_admin\fP
+which can be set false to relax this restriction (and also the same requirement
+for the \fB\-q\fP, \fB\-R\fP, and \fB\-S\fP options).
+.sp
+The deliveries happen synchronously, that is, the original Exim process does
+not terminate until all the delivery attempts have finished. No output is
+produced unless there is a serious error. If you want to see what is happening,
+use the \fB\-v\fP option as well, or inspect Exim's main log.
+.TP 10
+\fB\-Mar\fP <\fImessage id\fP> <\fIaddress\fP> <\fIaddress\fP> ...
+This option requests Exim to add the addresses to the list of recipients of the
+message ("ar" for "add recipients"). The first argument must be a message
+id, and the remaining ones must be email addresses. However, if the message is
+active (in the middle of a delivery attempt), it is not altered. This option
+can be used only by an admin user.
+.TP 10
+\fB\-MC\fP <\fItransport\fP> <\fIhostname\fP> <\fIhost IP\fP> <\fIsequence number\fP> <\fImessage id\fP>
+This option is not intended for use by external callers. It is used internally
+by Exim to invoke another instance of itself to deliver a waiting message using
+an existing SMTP connection, which is passed as the standard input. This must be the final option, and the caller
+must be root or the Exim user in order to use it.
+.TP 10
+\fB\-MCA\fP
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the \fB\-MC\fP option. It signifies that the
+connection to the remote host has been authenticated.
+.TP 10
+\fB\-MCD\fP
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the \fB\-MC\fP option. It signifies that the
+remote host supports the ESMTP DSN extension.
+.TP 10
+\fB\-MCd\fP
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the \fB\-d\fP option
+to pass on an information string on the purpose of the process.
+.TP 10
+\fB\-MCG\fP <\fIqueue name\fP>
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the \fB\-MC\fP option. It signifies that an
+alternate queue is used, named by the following argument.
+.TP 10
+\fB\-MCK\fP
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the \fB\-MC\fP option. It signifies that a
+remote host supports the ESMTP CHUNKING extension.
+.TP 10
+\fB\-MCL\fP
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the \fB\-MC\fP option. It signifies that the server to
+which Exim is connected advertised limits on numbers of mails, recipients or
+recipient domains.
+The limits are given by the following three arguments.
+.TP 10
+\fB\-MCP\fP
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the \fB\-MC\fP option. It signifies that the server to
+which Exim is connected supports pipelining.
+.TP 10
+\fB\-MCp\fP
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the \fB\-MC\fP option. It signifies that the connection
+t a remote server is via a SOCKS proxy, using addresses and ports given by
+the following four arguments.
+.TP 10
+\fB\-MCQ\fP <\fIprocess id\fP> <\fIpipe fd\fP>
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the \fB\-MC\fP option when the original delivery was
+started by a queue runner. It passes on the process id of the queue runner,
+together with the file descriptor number of an open pipe. Closure of the pipe
+signals the final completion of the sequence of processes that are passing
+messages through the same SMTP connection.
+.TP 10
+\fB\-MCq\fP <\fIrecipient address\fP> <\fIsize\fP>
+This option is not intended for use by external callers. It is used internally
+by Exim to implement quota checking for local users.
+.TP 10
+\fB\-MCS\fP
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the \fB\-MC\fP option, and passes on the fact that the
+ESMTP SIZE option should be used on messages delivered down the existing
+connection.
+.TP 10
+\fB\-MCT\fP
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the \fB\-MC\fP option, and passes on the fact that the
+host to which Exim is connected supports TLS encryption.
+.TP 10
+\fB\-MCr\fP <\fISNI\fP>
+\fB\-MCs\fP <\fISNI\fP>
+These options are not intended for use by external callers. It is used internally
+by Exim in conjunction with the \fB\-MCt\fP option, and passes on the fact that
+a TLS Server Name Indication was sent as part of the channel establishment.
+The argument gives the SNI string.
+The "r" variant indicates a DANE\-verified connection.
+.TP 10
+\fB\-MCt\fP <\fIIP address\fP> <\fIport\fP> <\fIcipher\fP>
+This option is not intended for use by external callers. It is used internally
+by Exim in conjunction with the \fB\-MC\fP option, and passes on the fact that the
+connection is being proxied by a parent process for handling TLS encryption.
+The arguments give the local address and port being proxied, and the TLS cipher.
+.TP 10
+\fB\-Mc\fP <\fImessage id\fP> <\fImessage id\fP> ...
+This option requests Exim to run a delivery attempt on each message, in turn,
+but unlike the \fB\-M\fP option, it does check for retry hints, and respects any
+that are found. This option is not very useful to external callers. It is
+provided mainly for internal use by Exim when it needs to re\-invoke itself in
+order to regain root privilege for a delivery.
+However, \fB\-Mc\fP can be useful when testing, in order to run a delivery that
+respects retry times and other options such as \fBhold_domains\fP that are
+overridden when \fB\-M\fP is used. Such a delivery does not count as a queue run.
+If you want to run a specific delivery as if in a queue run, you should use
+\fB\-q\fP with a message id argument. A distinction between queue run deliveries
+and other deliveries is made in one or two places.
+.TP 10
+\fB\-Mes\fP <\fImessage id\fP> <\fIaddress\fP>
+This option requests Exim to change the sender address in the message to the
+given address, which must be a fully qualified address or "<>" ("es" for
+"edit sender"). There must be exactly two arguments. The first argument must
+be a message id, and the second one an email address. However, if the message
+is active (in the middle of a delivery attempt), its status is not altered.
+This option can be used only by an admin user.
+.TP 10
+\fB\-Mf\fP <\fImessage id\fP> <\fImessage id\fP> ...
+This option requests Exim to mark each listed message as "frozen". This
+prevents any delivery attempts taking place until the message is "thawed",
+either manually or as a result of the \fBauto_thaw\fP configuration option.
+However, if any of the messages are active (in the middle of a delivery
+attempt), their status is not altered. This option can be used only by an admin
+user.
+.TP 10
+\fB\-Mg\fP <\fImessage id\fP> <\fImessage id\fP> ...
+This option requests Exim to give up trying to deliver the listed messages,
+including any that are frozen. However, if any of the messages are active,
+their status is not altered. For non\-bounce messages, a delivery error message
+is sent to the sender, containing the text "cancelled by administrator".
+Bounce messages are just discarded. This option can be used only by an admin
+user.
+.TP 10
+\fB\-MG\fP <\fIqueue name\fP> <\fImessage id\fP> <\fImessage id\fP> ...
+This option requests that each listed message be moved from its current
+queue to the given named queue.
+The destination queue name argument is required, but can be an empty
+string to define the default queue.
+If the messages are not currently located in the default queue,
+a \fB\-qG<name>\fP option will be required to define the source queue.
+.TP 10
+\fB\-Mmad\fP <\fImessage id\fP> <\fImessage id\fP> ...
+This option requests Exim to mark all the recipient addresses in the messages
+as already delivered ("mad" for "mark all delivered"). However, if any
+message is active (in the middle of a delivery attempt), its status is not
+altered. This option can be used only by an admin user.
+.TP 10
+\fB\-Mmd\fP <\fImessage id\fP> <\fIaddress\fP> <\fIaddress\fP> ...
+This option requests Exim to mark the given addresses as already delivered
+("md" for "mark delivered"). The first argument must be a message id, and
+the remaining ones must be email addresses. These are matched to recipient
+addresses in the message in a case\-sensitive manner. If the message is active
+(in the middle of a delivery attempt), its status is not altered. This option
+can be used only by an admin user.
+.TP 10
+\fB\-Mrm\fP <\fImessage id\fP> <\fImessage id\fP> ...
+This option requests Exim to remove the given messages from the queue. No
+bounce messages are sent; each message is simply forgotten. However, if any of
+the messages are active, their status is not altered. This option can be used
+only by an admin user or by the user who originally caused the message to be
+placed in the queue.
+.TP 10
+\fB\-Mset\fP <\fImessage id\fP>
+This option is useful only in conjunction with \fB\-be\fP (that is, when testing
+string expansions). Exim loads the given message from its spool before doing
+the test expansions, thus setting message\-specific variables such as
+\fI$message_size\fP and the header variables. The \fI$recipients\fP variable is made
+available. This feature is provided to make it easier to test expansions that
+make use of these variables. However, this option can be used only by an admin
+user. See also \fB\-bem\fP.
+.TP 10
+\fB\-Mt\fP <\fImessage id\fP> <\fImessage id\fP> ...
+This option requests Exim to "thaw" any of the listed messages that are
+"frozen", so that delivery attempts can resume. However, if any of the
+messages are active, their status is not altered. This option can be used only
+by an admin user.
+.TP 10
+\fB\-Mvb\fP <\fImessage id\fP>
+This option causes the contents of the message body (\-D) spool file to be
+written to the standard output. This option can be used only by an admin user.
+.TP 10
+\fB\-Mvc\fP <\fImessage id\fP>
+This option causes a copy of the complete message (header lines plus body) to
+be written to the standard output in RFC 2822 format. This option can be used
+only by an admin user.
+.TP 10
+\fB\-Mvh\fP <\fImessage id\fP>
+This option causes the contents of the message headers (\-H) spool file to be
+written to the standard output. This option can be used only by an admin user.
+.TP 10
+\fB\-Mvl\fP <\fImessage id\fP>
+This option causes the contents of the message log spool file to be written to
+the standard output. This option can be used only by an admin user.
+.TP 10
+\fB\-m\fP
+This is a synonym for \fB\-om\fP that is accepted by Sendmail
+(\fBhttps://docs.oracle.com/cd/E19457\-01/801\-6680\-1M/801\-6680\-1M.pdf\fP
+p. 1M\-258), so Exim treats it that way too.
+.TP 10
+\fB\-N\fP
+This is a debugging option that inhibits delivery of a message at the transport
+level. It implies \fB\-v\fP. Exim goes through many of the motions of delivery \-
+it just doesn't actually transport the message, but instead behaves as if it
+had successfully done so. However, it does not make any updates to the retry
+database, and the log entries for deliveries are flagged with "*>" rather
+than "=>".
+.sp
+Because \fB\-N\fP discards any message to which it applies, only root or the Exim
+user are allowed to use it with \fB\-bd\fP, \fB\-q\fP, \fB\-R\fP or \fB\-M\fP. In other
+words, an ordinary user can use it only when supplying an incoming message to
+which it will apply. Although transportation never fails when \fB\-N\fP is set, an
+address may be deferred because of a configuration problem on a transport, or a
+routing problem. Once \fB\-N\fP has been used for a delivery attempt, it sticks to
+the message, and applies to any subsequent delivery attempts that may happen
+for that message.
+.TP 10
+\fB\-n\fP
+This option is interpreted by Sendmail to mean "no aliasing".
+For normal modes of operation, it is ignored by Exim.
+When combined with \fB\-bP\fP it makes the output more terse (suppresses
+option names, environment values and config pretty printing).
+.TP 10
+\fB\-O\fP <\fIdata\fP>
+This option is interpreted by Sendmail to mean set option. It is ignored by
+Exim.
+.TP 10
+\fB\-oA\fP <\fIfile name\fP>
+This option is used by Sendmail in conjunction with \fB\-bi\fP to specify an
+alternative alias filename. Exim handles \fB\-bi\fP differently; see the
+description above.
+.TP 10
+\fB\-oB\fP <\fIn\fP>
+This is a debugging option which limits the maximum number of messages that can
+be delivered down one SMTP connection, overriding the value set in any smtp
+transport. If <\fIn\fP> is omitted, the limit is set to 1.
+.TP 10
+\fB\-odb\fP
+This option applies to all modes in which Exim accepts incoming messages,
+including the listening daemon. It requests "background" delivery of such
+messages, which means that the accepting process automatically starts a
+delivery process for each message received, but does not wait for the delivery
+processes to finish.
+.sp
+When all the messages have been received, the reception process exits,
+leaving the delivery processes to finish in their own time. The standard output
+and error streams are closed at the start of each delivery process.
+This is the default action if none of the \fB\-od\fP options are present.
+.sp
+If one of the queueing options in the configuration file
+(\fBqueue_only\fP or \fBqueue_only_file\fP, for example) is in effect, \fB\-odb\fP
+overrides it if \fBqueue_only_override\fP is set true, which is the default
+setting. If \fBqueue_only_override\fP is set false, \fB\-odb\fP has no effect.
+.TP 10
+\fB\-odf\fP
+This option requests "foreground" (synchronous) delivery when Exim has
+accepted a locally\-generated message. (For the daemon it is exactly the same as
+\fB\-odb\fP.) A delivery process is automatically started to deliver the message,
+and Exim waits for it to complete before proceeding.
+.sp
+The original Exim reception process does not finish until the delivery
+process for the final message has ended. The standard error stream is left open
+during deliveries.
+.sp
+However, like \fB\-odb\fP, this option has no effect if \fBqueue_only_override\fP is
+false and one of the queueing options in the configuration file is in effect.
+.sp
+If there is a temporary delivery error during foreground delivery, the
+message is left in the queue for later delivery, and the original reception
+process exits.
+.TP 10
+\fB\-odi\fP
+This option is synonymous with \fB\-odf\fP. It is provided for compatibility with
+Sendmail.
+.TP 10
+\fB\-odq\fP
+This option applies to all modes in which Exim accepts incoming messages,
+including the listening daemon. It specifies that the accepting process should
+not automatically start a delivery process for each message received. Messages
+are placed in the queue, and remain there until a subsequent queue runner
+process encounters them. There are several configuration options (such as
+\fBqueue_only\fP) that can be used to queue incoming messages under certain
+conditions. This option overrides all of them and also \fB\-odqs\fP. It always
+forces queueing.
+.TP 10
+\fB\-odqs\fP
+This option is a hybrid between \fB\-odb\fP/\fB\-odi\fP and \fB\-odq\fP.
+However, like \fB\-odb\fP and \fB\-odi\fP, this option has no effect if
+\fBqueue_only_override\fP is false and one of the queueing options in the
+configuration file is in effect.
+.sp
+When \fB\-odqs\fP does operate, a delivery process is started for each incoming
+message, in the background by default, but in the foreground if \fB\-odi\fP is
+also present. The recipient addresses are routed, and local deliveries are done
+in the normal way. However, if any SMTP deliveries are required, they are not
+done at this time, so the message remains in the queue until a subsequent queue
+runner process encounters it. Because routing was done, Exim knows which
+messages are waiting for which hosts, and so a number of messages for the same
+host can be sent in a single SMTP connection. The \fBqueue_smtp_domains\fP
+configuration option has the same effect for specific domains. See also the
+\fB\-qq\fP option.
+.TP 10
+\fB\-oee\fP
+If an error is detected while a non\-SMTP message is being received (for
+example, a malformed address), the error is reported to the sender in a mail
+message.
+.sp
+Provided
+this error message is successfully sent, the Exim receiving process
+exits with a return code of zero. If not, the return code is 2 if the problem
+is that the original message has no recipients, or 1 for any other error.
+This is the default \fB\-oe\fP\fIx\fP option if Exim is called as \fIrmail\fP.
+.TP 10
+\fB\-oem\fP
+This is the same as \fB\-oee\fP, except that Exim always exits with a non\-zero
+return code, whether or not the error message was successfully sent.
+This is the default \fB\-oe\fP\fIx\fP option, unless Exim is called as \fIrmail\fP.
+.TP 10
+\fB\-oep\fP
+If an error is detected while a non\-SMTP message is being received, the
+error is reported by writing a message to the standard error file (stderr).
+The return code is 1 for all errors.
+.TP 10
+\fB\-oeq\fP
+This option is supported for compatibility with Sendmail, but has the same
+effect as \fB\-oep\fP.
+.TP 10
+\fB\-oew\fP
+This option is supported for compatibility with Sendmail, but has the same
+effect as \fB\-oem\fP.
+.TP 10
+\fB\-oi\fP
+This option, which has the same effect as \fB\-i\fP, specifies that a dot on a
+line by itself should not terminate an incoming, non\-SMTP message. Otherwise, a
+single dot does terminate, though Exim does no special processing for other
+lines that start with a dot. This option is set by default if Exim is called as
+\fIrmail\fP. See also \fB\-ti\fP.
+.TP 10
+\fB\-oitrue\fP
+This option is treated as synonymous with \fB\-oi\fP.
+.TP 10
+\fB\-oMa\fP <\fIhost address\fP>
+A number of options starting with \fB\-oM\fP can be used to set values associated
+with remote hosts on locally\-submitted messages (that is, messages not received
+over TCP/IP). These options can be used by any caller in conjunction with the
+\fB\-bh\fP, \fB\-be\fP, \fB\-bf\fP, \fB\-bF\fP, \fB\-bt\fP, or \fB\-bv\fP testing options. In
+other circumstances, they are ignored unless the caller is trusted.
+.sp
+The \fB\-oMa\fP option sets the sender host address. This may include a port
+number at the end, after a full stop (period). For example:
+.sp
+  exim \-bs \-oMa 10.9.8.7.1234
+.sp
+An alternative syntax is to enclose the IP address in square brackets,
+followed by a colon and the port number:
+.sp
+  exim \-bs \-oMa [10.9.8.7]:1234
+.sp
+The IP address is placed in the \fI$sender_host_address\fP variable, and the
+port, if present, in \fI$sender_host_port\fP. If both \fB\-oMa\fP and \fB\-bh\fP
+are present on the command line, the sender host IP address is taken from
+whichever one is last.
+.TP 10
+\fB\-oMaa\fP <\fIname\fP>
+See \fB\-oMa\fP above for general remarks about the \fB\-oM\fP options. The \fB\-oMaa\fP
+option sets the value of \fI$sender_host_authenticated\fP (the authenticator
+name).
+This option can be used with \fB\-bh\fP and \fB\-bs\fP to set up an
+authenticated SMTP session without actually using the SMTP AUTH command.
+.TP 10
+\fB\-oMai\fP <\fIstring\fP>
+See \fB\-oMa\fP above for general remarks about the \fB\-oM\fP options. The \fB\-oMai\fP
+option sets the value of \fI$authenticated_id\fP (the id that was authenticated).
+This overrides the default value (the caller's login id, except with \fB\-bh\fP,
+where there is no default) for messages from local sources.
+.TP 10
+\fB\-oMas\fP <\fIaddress\fP>
+See \fB\-oMa\fP above for general remarks about the \fB\-oM\fP options. The \fB\-oMas\fP
+option sets the authenticated sender value in \fI$authenticated_sender\fP. It
+overrides the sender address that is created from the caller's login id for
+messages from local sources, except when \fB\-bh\fP is used, when there is no
+default. For both \fB\-bh\fP and \fB\-bs\fP, an authenticated sender that is
+specified on a MAIL command overrides this value.
+.TP 10
+\fB\-oMi\fP <\fIinterface address\fP>
+See \fB\-oMa\fP above for general remarks about the \fB\-oM\fP options. The \fB\-oMi\fP
+option sets the IP interface address value. A port number may be included,
+using the same syntax as for \fB\-oMa\fP. The interface address is placed in
+\fI$received_ip_address\fP and the port number, if present, in \fI$received_port\fP.
+.TP 10
+\fB\-oMm\fP <\fImessage reference\fP>
+See \fB\-oMa\fP above for general remarks about the \fB\-oM\fP options. The \fB\-oMm\fP
+option sets the message reference, e.g. message\-id, and is logged during
+delivery. This is useful when some kind of audit trail is required to tie
+messages together. The format of the message reference is checked and will
+abort if the format is invalid. The option will only be accepted if exim is
+running in trusted mode, not as any regular user.
+.sp
+The best example of a message reference is when Exim sends a bounce message.
+The message reference is the message\-id of the original message for which Exim
+is sending the bounce.
+.TP 10
+\fB\-oMr\fP <\fIprotocol name\fP>
+See \fB\-oMa\fP above for general remarks about the \fB\-oM\fP options. The \fB\-oMr\fP
+option sets the received protocol value that is stored in
+\fI$received_protocol\fP. However, it does not apply (and is ignored) when \fB\-bh\fP
+or \fB\-bs\fP is used. For \fB\-bh\fP, the protocol is forced to one of the standard
+SMTP protocol names. For \fB\-bs\fP, the protocol is always "local\-" followed by
+one of those same names. For \fB\-bS\fP (batched SMTP) however, the protocol can
+be set by \fB\-oMr\fP. Repeated use of this option is not supported.
+.TP 10
+\fB\-oMs\fP <\fIhost name\fP>
+See \fB\-oMa\fP above for general remarks about the \fB\-oM\fP options. The \fB\-oMs\fP
+option sets the sender host name in \fI$sender_host_name\fP. When this option is
+present, Exim does not attempt to look up a host name from an IP address; it
+uses the name it is given.
+.TP 10
+\fB\-oMt\fP <\fIident string\fP>
+See \fB\-oMa\fP above for general remarks about the \fB\-oM\fP options. The \fB\-oMt\fP
+option sets the sender ident value in \fI$sender_ident\fP. The default setting for
+local callers is the login id of the calling process, except when \fB\-bh\fP is
+used, when there is no default.
+.TP 10
+\fB\-om\fP
+In Sendmail, this option means "me too", indicating that the sender of a
+message should receive a copy of the message if the sender appears in an alias
+expansion. Exim always does this, so the option does nothing.
+.TP 10
+\fB\-oo\fP
+This option is ignored. In Sendmail it specifies "old style headers",
+whatever that means.
+.TP 10
+\fB\-oP\fP <\fIpath\fP>
+This option is useful only in conjunction with \fB\-bd\fP or \fB\-q\fP with a time
+value. The option specifies the file to which the process id of the daemon is
+written. When \fB\-oX\fP is used with \fB\-bd\fP, or when \fB\-q\fP with a time is used
+without \fB\-bd\fP, this is the only way of causing Exim to write a pid file,
+because in those cases, the normal pid file is not used.
+.TP 10
+\fB\-oPX\fP
+This option is not intended for general use.
+The daemon uses it when terminating due to a SIGTEM, possibly in
+combination with \fB\-oP\fP <\fIpath\fP>.
+It causes the pid file to be removed.
+.TP 10
+\fB\-or\fP <\fItime\fP>
+This option sets a timeout value for incoming non\-SMTP messages. If it is not
+set, Exim will wait forever for the standard input. The value can also be set
+by the \fBreceive_timeout\fP option.
+.TP 10
+\fB\-os\fP <\fItime\fP>
+This option sets a timeout value for incoming SMTP messages. The timeout
+applies to each SMTP command and block of data. The value can also be set by
+the \fBsmtp_receive_timeout\fP option; it defaults to 5 minutes.
+.TP 10
+\fB\-ov\fP
+This option has exactly the same effect as \fB\-v\fP.
+.TP 10
+\fB\-oX\fP <\fInumber or string\fP>
+This option is relevant only when the \fB\-bd\fP (start listening daemon) option
+is also given. It controls which ports and interfaces the daemon uses. When \fB\-oX\fP is used to start a daemon, no pid
+file is written unless \fB\-oP\fP is also present to specify a pid filename.
+.TP 10
+\fB\-oY\fP
+This option controls the creation of an inter\-process communications endpoint
+by the Exim daemon.
+It is only relevant when the \fB\-bd\fP (start listening daemon) option is also
+given.
+Normally the daemon creates this socket, unless a \fB\-oX\fP and \fBno\fP \fB\-oP\fP
+option is also present.
+If this option is given then the socket will not be created.  This could be
+required if the system is running multiple daemons.
+.sp
+The socket is currently used for
+.sp
+fast ramp\-up of queue runner processes
+.sp
+obtaining a current queue size
+.TP 10
+\fB\-pd\fP
+This option applies when an embedded Perl interpreter is linked with Exim. It overrides the setting of the \fBperl_at_start\fP
+option, forcing the starting of the interpreter to be delayed until it is
+needed.
+.TP 10
+\fB\-ps\fP
+This option applies when an embedded Perl interpreter is linked with Exim. It overrides the setting of the \fBperl_at_start\fP
+option, forcing the starting of the interpreter to occur as soon as Exim is
+started.
+.TP 10
+\fB\-p\fP<\fIrval\fP>:<\fIsval\fP>
+For compatibility with Sendmail, this option is equivalent to
+.sp
+  \-oMr <\fIrval\fP> \-oMs <\fIsval\fP>
+.sp
+It sets the incoming protocol and host name (for trusted callers). The
+host name and its colon can be omitted when only the protocol is to be set.
+Note the Exim already has two private options, \fB\-pd\fP and \fB\-ps\fP, that refer
+to embedded Perl. It is therefore impossible to set a protocol value of d
+or s using this option (but that does not seem a real limitation).
+Repeated use of this option is not supported.
+.TP 10
+\fB\-q\fP
+This option is normally restricted to admin users. However, there is a
+configuration option called \fBprod_requires_admin\fP which can be set false to
+relax this restriction (and also the same requirement for the \fB\-M\fP, \fB\-R\fP,
+and \fB\-S\fP options).
+.sp
+If other commandline options do not specify an action,
+the \fB\-q\fP option starts one queue runner process. This scans the queue of
+waiting messages, and runs a delivery process for each one in turn. It waits
+for each delivery process to finish before starting the next one. A delivery
+process may not actually do any deliveries if the retry times for the addresses
+have not been reached. Use \fB\-qf\fP (see below) if you want to override this.
+.sp
+If
+the delivery process spawns other processes to deliver other messages down
+passed SMTP connections, the queue runner waits for these to finish before
+proceeding.
+.sp
+When all the queued messages have been considered, the original queue runner
+process terminates. In other words, a single pass is made over the waiting
+mail, one message at a time. Use \fB\-q\fP with a time (see below) if you want
+this to be repeated periodically.
+.sp
+Exim processes the waiting messages in an unpredictable order. It isn't very
+random, but it is likely to be different each time, which is all that matters.
+If one particular message screws up a remote MTA, other messages to the same
+MTA have a chance of getting through if they get tried first.
+.sp
+It is possible to cause the messages to be processed in lexical message id
+order, which is essentially the order in which they arrived, by setting the
+\fBqueue_run_in_order\fP option, but this is not recommended for normal use.
+.TP 10
+\fB\-q\fP<\fIqflags\fP>
+The \fB\-q\fP option may be followed by one or more flag letters that change its
+behaviour. They are all optional, but if more than one is present, they must
+appear in the correct order. Each flag is described in a separate item below.
+.TP 10
+\fB\-qq...\fP
+An option starting with \fB\-qq\fP requests a two\-stage queue run. In the first
+stage, the queue is scanned as if the \fBqueue_smtp_domains\fP option matched
+every domain. Addresses are routed, local deliveries happen, but no remote
+transports are run.
+.sp
+Performance will be best if the \fBqueue_run_in_order\fP option is false.
+If that is so and the \fBqueue_fast_ramp\fP option is true then
+in the first phase of the run,
+once a threshold number of messages are routed for a given host,
+a delivery process is forked in parallel with the rest of the scan.
+.sp
+The hints database that remembers which messages are waiting for specific hosts
+is updated, as if delivery to those hosts had been deferred. After this is
+complete, a second, normal queue scan happens, with routing and delivery taking
+place as normal. Messages that are routed to the same host should mostly be
+delivered down a single SMTP
+connection because of the hints that were set up during the first queue scan.
+This option may be useful for hosts that are connected to the Internet
+intermittently.
+.TP 10
+\fB\-q[q]i...\fP
+If the \fIi\fP flag is present, the queue runner runs delivery processes only for
+those messages that haven't previously been tried. (\fIi\fP stands for "initial
+delivery".) This can be helpful if you are putting messages in the queue using
+\fB\-odq\fP and want a queue runner just to process the new messages.
+.TP 10
+\fB\-q[q][i]f...\fP
+If one \fIf\fP flag is present, a delivery attempt is forced for each non\-frozen
+message, whereas without \fIf\fP only those non\-frozen addresses that have passed
+their retry times are tried.
+.TP 10
+\fB\-q[q][i]ff...\fP
+If \fIff\fP is present, a delivery attempt is forced for every message, whether
+frozen or not.
+.TP 10
+\fB\-q[q][i][f[f]]l\fP
+The \fIl\fP (the letter "ell") flag specifies that only local deliveries are to
+be done. If a message requires any remote deliveries, it remains in the queue
+for later delivery.
+.TP 10
+\fB\-q[q][i][f[f]][l][G<name>[/<time>]]]\fP
+If the \fIG\fP flag and a name is present, the queue runner operates on the
+queue with the given name rather than the default queue.
+The name should not contain a \fI/\fP character.
+For a periodic queue run (see below)
+append to the name a slash and a time value.
+.sp
+If other commandline options specify an action, a \fI\-qG<name>\fP option
+will specify a queue to operate on.
+For example:
+.sp
+  exim \-bp \-qGquarantine
+  mailq \-qGquarantine
+  exim \-qGoffpeak \-Rf @special.domain.example
+.TP 10
+\fB\-q\fP<\fIqflags\fP> <\fIstart id\fP> <\fIend id\fP>
+When scanning the queue, Exim can be made to skip over messages whose ids are
+lexically less than a given value by following the \fB\-q\fP option with a
+starting message id. For example:
+.sp
+  exim \-q 0t5C6f\-0000c8\-00
+.sp
+Messages that arrived earlier than 0t5C6f\-0000c8\-00 are not inspected. If a
+second message id is given, messages whose ids are lexically greater than it
+are also skipped. If the same id is given twice, for example,
+.sp
+  exim \-q 0t5C6f\-0000c8\-00 0t5C6f\-0000c8\-00
+.sp
+just one delivery process is started, for that message. This differs from
+\fB\-M\fP in that retry data is respected, and it also differs from \fB\-Mc\fP in
+that it counts as a delivery from a queue run. Note that the selection
+mechanism does not affect the order in which the messages are scanned. There
+are also other ways of selecting specific sets of messages for delivery in a
+queue run \- see \fB\-R\fP and \fB\-S\fP.
+.TP 10
+\fB\-q\fP<\fIqflags\fP><\fItime\fP>
+When a time value is present, the \fB\-q\fP option causes Exim to run as a daemon,
+starting a queue runner process at intervals specified by the given time value. This form of the
+\fB\-q\fP option is commonly combined with the \fB\-bd\fP option, in which case a
+single daemon process handles both functions. A common way of starting up a
+combined daemon at system boot time is to use a command such as
+.sp
+  /usr/exim/bin/exim \-bd \-q30m
+.sp
+Such a daemon listens for incoming SMTP calls, and also starts a queue runner
+process every 30 minutes.
+.sp
+When a daemon is started by \fB\-q\fP with a time value, but without \fB\-bd\fP, no
+pid file is written unless one is explicitly requested by the \fB\-oP\fP option.
+.TP 10
+\fB\-qR\fP<\fIrsflags\fP> <\fIstring\fP>
+This option is synonymous with \fB\-R\fP. It is provided for Sendmail
+compatibility.
+.TP 10
+\fB\-qS\fP<\fIrsflags\fP> <\fIstring\fP>
+This option is synonymous with \fB\-S\fP.
+.TP 10
+\fB\-R\fP<\fIrsflags\fP> <\fIstring\fP>
+The <\fIrsflags\fP> may be empty, in which case the white space before the string
+is optional, unless the string is \fIf\fP, \fIff\fP, \fIr\fP, \fIrf\fP, or \fIrff\fP,
+which are the possible values for <\fIrsflags\fP>. White space is required if
+<\fIrsflags\fP> is not empty.
+.sp
+This option is similar to \fB\-q\fP with no time value, that is, it causes Exim to
+perform a single queue run, except that, when scanning the messages on the
+queue, Exim processes only those that have at least one undelivered recipient
+address containing the given string, which is checked in a case\-independent
+way. If the <\fIrsflags\fP> start with \fIr\fP, <\fIstring\fP> is interpreted as a
+regular expression; otherwise it is a literal string.
+.sp
+If you want to do periodic queue runs for messages with specific recipients,
+you can combine \fB\-R\fP with \fB\-q\fP and a time value. For example:
+.sp
+  exim \-q25m \-R @special.domain.example
+.sp
+This example does a queue run for messages with recipients in the given domain
+every 25 minutes. Any additional flags that are specified with \fB\-q\fP are
+applied to each queue run.
+.sp
+Once a message is selected for delivery by this mechanism, all its addresses
+are processed. For the first selected message, Exim overrides any retry
+information and forces a delivery attempt for each undelivered address. This
+means that if delivery of any address in the first message is successful, any
+existing retry information is deleted, and so delivery attempts for that
+address in subsequently selected messages (which are processed without forcing)
+will run. However, if delivery of any address does not succeed, the retry
+information is updated, and in subsequently selected messages, the failing
+address will be skipped.
+.sp
+If the <\fIrsflags\fP> contain \fIf\fP or \fIff\fP, the delivery forcing applies to
+all selected messages, not just the first; frozen messages are included when
+\fIff\fP is present.
+.sp
+The \fB\-R\fP option makes it straightforward to initiate delivery of all messages
+to a given domain after a host has been down for some time. When the SMTP
+command ETRN is accepted by its ACL, its default
+effect is to run Exim with the \fB\-R\fP option, but it can be configured to run
+an arbitrary command instead.
+.TP 10
+\fB\-r\fP
+This is a documented (for Sendmail) obsolete alternative name for \fB\-f\fP.
+.TP 10
+\fB\-S\fP<\fIrsflags\fP> <\fIstring\fP>
+This option acts like \fB\-R\fP except that it checks the string against each
+message's sender instead of against the recipients. If \fB\-R\fP is also set, both
+conditions must be met for a message to be selected. If either of the options
+has \fIf\fP or \fIff\fP in its flags, the associated action is taken.
+.TP 10
+\fB\-Tqt\fP <\fItimes\fP>
+This is an option that is exclusively for use by the Exim testing suite. It is not
+recognized when Exim is run normally. It allows for the setting up of explicit
+"queue times" so that various warning/retry features can be tested.
+.TP 10
+\fB\-t\fP
+When Exim is receiving a locally\-generated, non\-SMTP message on its standard
+input, the \fB\-t\fP option causes the recipients of the message to be obtained
+from the \fITo:\fP, \fICc:\fP, and \fIBcc:\fP header lines in the message instead of
+from the command arguments. The addresses are extracted before any rewriting
+takes place and the \fIBcc:\fP header line, if present, is then removed.
+.sp
+If the command has any arguments, they specify addresses to which the message
+is \fInot\fP to be delivered. That is, the argument addresses are removed from
+the recipients list obtained from the headers. This is compatible with Smail 3
+and in accordance with the documented behaviour of several versions of
+Sendmail, as described in man pages on a number of operating systems (e.g.
+Solaris 8, IRIX 6.5, HP\-UX 11). However, some versions of Sendmail \fIadd\fP
+argument addresses to those obtained from the headers, and the O'Reilly
+Sendmail book documents it that way. Exim can be made to add argument addresses
+instead of subtracting them by setting the option
+\fBextract_addresses_remove_arguments\fP false.
+.sp
+If there are any \fBResent\-\fP header lines in the message, Exim extracts
+recipients from all \fIResent\-To:\fP, \fIResent\-Cc:\fP, and \fIResent\-Bcc:\fP header
+lines instead of from \fITo:\fP, \fICc:\fP, and \fIBcc:\fP. This is for compatibility
+with Sendmail and other MTAs. (Prior to release 4.20, Exim gave an error if
+\fB\-t\fP was used in conjunction with \fBResent\-\fP header lines.)
+.sp
+RFC 2822 talks about different sets of \fBResent\-\fP header lines (for when a
+message is resent several times). The RFC also specifies that they should be
+added at the front of the message, and separated by \fIReceived:\fP lines. It is
+not at all clear how \fB\-t\fP should operate in the present of multiple sets,
+nor indeed exactly what constitutes a "set".
+In practice, it seems that MUAs do not follow the RFC. The \fBResent\-\fP lines
+are often added at the end of the header, and if a message is resent more than
+once, it is common for the original set of \fBResent\-\fP headers to be renamed as
+\fBX\-Resent\-\fP when a new set is added. This removes any possible ambiguity.
+.TP 10
+\fB\-ti\fP
+This option is exactly equivalent to \fB\-t\fP \fB\-i\fP. It is provided for
+compatibility with Sendmail.
+.TP 10
+\fB\-tls\-on\-connect\fP
+This option is available when Exim is compiled with TLS support. It forces all
+incoming SMTP connections to behave as if the incoming port is listed in the
+\fBtls_on_connect_ports\fP option.
+.TP 10
+\fB\-U\fP
+Sendmail uses this option for "initial message submission", and its
+documentation states that in future releases, it may complain about
+syntactically invalid messages rather than fixing them when this flag is not
+set. Exim ignores this option.
+.TP 10
+\fB\-v\fP
+This option causes Exim to write information to the standard error stream,
+describing what it is doing. In particular, it shows the log lines for
+receiving and delivering a message, and if an SMTP connection is made, the SMTP
+dialogue is shown. Some of the log lines shown may not actually be written to
+the log if the setting of \fBlog_selector\fP discards them. Any relevant
+selectors are shown with each log line. If none are shown, the logging is
+unconditional.
+.TP 10
+\fB\-x\fP
+AIX uses \fB\-x\fP for a private purpose ("mail from a local mail program has
+National Language Support extended characters in the body of the mail item").
+It sets \fB\-x\fP when calling the MTA from its \fBmail\fP command. Exim ignores
+this option.
+.TP 10
+\fB\-X\fP <\fIlogfile\fP>
+This option is interpreted by Sendmail to cause debug information to be sent
+to the named file.  It is ignored by Exim.
+.TP 10
+\fB\-z\fP <\fIlog\-line\fP>
+This option writes its argument to Exim's logfile.
+Use is restricted to administrators; the intent is for operational notes.
+Quotes should be used to maintain a multi\-word item as a single argument,
+under most shells.
+.sp
+.
+.SH "SEE ALSO"
+.rs
+.sp
+The full Exim specification, the Exim book, and the Exim wiki.
diff --git a/doc/experimental-spec.txt b/doc/experimental-spec.txt
new file mode 100644
index 0000000..dbd57d6
--- /dev/null
+++ b/doc/experimental-spec.txt
@@ -0,0 +1,665 @@
+From time to time, experimental features may be added to Exim.
+While a feature  is experimental, there  will be a  build-time
+option whose name starts  "EXPERIMENTAL_" that must be  set in
+order to include the  feature. This file contains  information
+about experimental  features, all  of which  are unstable and
+liable to incompatible change.
+
+
+Brightmail AntiSpam (BMI) support
+--------------------------------------------------------------
+
+Brightmail  AntiSpam  is  a  commercial  package.  Please  see
+http://www.brightmail.com    for    more    information     on
+the product. For  the sake of  clarity, we'll refer  to it  as
+"BMI" from now on.
+
+
+0) BMI concept and implementation overview
+
+In  contrast  to   how  spam-scanning  with   SpamAssassin  is
+implemented  in  exiscan-acl,  BMI  is  more  suited  for  per
+-recipient  scanning of  messages. However,  each messages  is
+scanned  only  once,  but  multiple  "verdicts"  for  multiple
+recipients can be  returned from the  BMI server. The  exiscan
+implementation  passes  the  message to  the  BMI  server just
+before accepting it.  It then adds  the retrieved verdicts  to
+the messages header file in the spool. These verdicts can then
+be  queried  in  routers,  where  operation  is  per-recipient
+instead  of per-message.  To use  BMI, you  need to  take the
+following steps:
+
+  1) Compile Exim with BMI support
+  2) Set up main BMI options (top section of Exim config file)
+  3) Set up ACL control statement (ACL section of the config
+     file)
+  4) Set up your routers to use BMI verdicts (routers section
+     of the config file).
+  5) (Optional) Set up per-recipient opt-in information.
+
+These four steps are explained in more details below.
+
+1) Adding support for BMI at compile time
+
+  To compile with BMI support,  you need to link Exim  against
+  the  Brightmail  client   SDK,  consisting   of  a   library
+  (libbmiclient_single.so)  and  a  header  file  (bmi_api.h).
+  You'll also need to explicitly set a flag in the Makefile to
+  include BMI support in the Exim binary. Both can be achieved
+  with  these lines in Local/Makefile:
+
+  EXPERIMENTAL_BRIGHTMAIL=yes
+  CFLAGS=-I/path/to/the/dir/with/the/includefile
+  EXTRALIBS_EXIM=-L/path/to/the/dir/with/the/library -lbmiclient_single
+
+  If  you use  other CFLAGS  or EXTRALIBS_EXIM  settings then
+  merge the content of these lines with them.
+
+  Note for BMI6.x users: You'll also have to add -lxml2_single
+  to the EXTRALIBS_EXIM line. Users of 5.5x do not need to  do
+  this.
+
+  You    should     also    include     the    location     of
+  libbmiclient_single.so in your dynamic linker  configuration
+  file   (usually   /etc/ld.so.conf)   and   run    "ldconfig"
+  afterwards, or  else the  produced Exim  binary will  not be
+  able to find the library file.
+
+
+2) Setting up BMI support in the Exim main configuration
+
+  To enable BMI  support in the  main Exim configuration,  you
+  should set the path to the main BMI configuration file  with
+  the "bmi_config_file" option, like this:
+
+  bmi_config_file = /opt/brightmail/etc/brightmail.cfg
+
+  This must go into section 1 of Exim's configuration file (You
+  can  put it  right on  top). If  you omit  this option,  it
+  defaults to /opt/brightmail/etc/brightmail.cfg.
+
+  Note for BMI6.x users: This  file is in XML format  in V6.xx
+  and its  name is  /opt/brightmail/etc/bmiconfig.xml. So  BMI
+  6.x users MUST set the bmi_config_file option.
+
+
+3) Set up ACL control statement
+
+  To  optimize performance,  it makes  sense only  to process
+  messages coming from remote, untrusted sources with the  BMI
+  server.  To set  up a  messages for  processing by  the BMI
+  server, you MUST set the "bmi_run" control statement in  any
+  ACL for an incoming message.  You will typically do this  in
+  an "accept"  block in  the "acl_check_rcpt"  ACL. You should
+  use the "accept" block(s)  that accept messages from  remote
+  servers for your own domain(s). Here is an example that uses
+  the "accept" blocks from Exim's default configuration file:
+
+
+  accept  domains       = +local_domains
+          endpass
+          verify        = recipient
+          control       = bmi_run
+
+  accept  domains       = +relay_to_domains
+          endpass
+          verify        = recipient
+          control       = bmi_run
+
+  If bmi_run  is not  set in  any ACL  during reception of the
+  message, it will NOT be passed to the BMI server.
+
+
+4) Setting up routers to use BMI verdicts
+
+  When a message has been  run through the BMI server,  one or
+  more "verdicts" are  present. Different recipients  can have
+  different verdicts. Each  recipient is treated  individually
+  during routing, so you  can query the verdicts  by recipient
+  at  that stage.  From Exim's  view, a  verdict can  have the
+  following outcomes:
+
+  o deliver the message normally
+  o deliver the message to an alternate location
+  o do not deliver the message
+
+  To query  the verdict  for a  recipient, the  implementation
+  offers the following tools:
+
+
+  - Boolean router  preconditions. These  can be  used in  any
+    router. For a simple  implementation of BMI, these  may be
+    all  that  you  need.  The  following  preconditions   are
+    available:
+
+    o bmi_deliver_default
+
+      This  precondition  is  TRUE  if  the  verdict  for  the
+      recipient is  to deliver  the message  normally. If  the
+      message has not been  processed by the BMI  server, this
+      variable defaults to TRUE.
+
+    o bmi_deliver_alternate
+
+      This  precondition  is  TRUE  if  the  verdict  for  the
+      recipient  is to  deliver the  message to  an alternate
+      location.  You  can  get the  location  string  from the
+      $bmi_alt_location expansion variable if you need it. See
+      further below. If the message has not been processed  by
+      the BMI server, this variable defaults to FALSE.
+
+    o bmi_dont_deliver
+
+      This  precondition  is  TRUE  if  the  verdict  for  the
+      recipient  is  NOT  to   deliver  the  message  to   the
+      recipient. You will typically use this precondition in a
+      top-level blackhole router, like this:
+
+        # don't deliver messages handled by the BMI server
+        bmi_blackhole:
+          driver = redirect
+          bmi_dont_deliver
+          data = :blackhole:
+
+      This router should be on top of all others, so  messages
+      that should not be delivered do not reach other  routers
+      at all. If   the  message  has  not  been  processed  by
+      the  BMI server, this variable defaults to FALSE.
+
+
+  - A list router  precondition to query  if rules "fired"  on
+    the message for the recipient. Its name is "bmi_rule". You
+    use  it  by  passing it  a  colon-separated  list of  rule
+    numbers. You can use this condition to route messages that
+    matched specific rules. Here is an example:
+
+      # special router for BMI rule #5, #8 and #11
+      bmi_rule_redirect:
+        driver = redirect
+        bmi_rule = 5:8:11
+        data = postmaster@mydomain.com
+
+
+  - Expansion variables. Several  expansion variables are  set
+    during  routing.  You  can  use  them  in  custom   router
+    conditions,  for  example.  The  following  variables  are
+    available:
+
+    o $bmi_base64_verdict
+
+      This variable  will contain  the BASE64  encoded verdict
+      for the recipient being routed. You can use it to add  a
+      header to messages for tracking purposes, for example:
+
+      localuser:
+        driver = accept
+        check_local_user
+        headers_add = X-Brightmail-Verdict: $bmi_base64_verdict
+        transport = local_delivery
+
+      If there is no verdict available for the recipient being
+      routed, this variable contains the empty string.
+
+    o $bmi_base64_tracker_verdict
+
+      This variable  will contain  a BASE64  encoded subset of
+      the  verdict  information  concerning  the  "rules" that
+      fired  on the  message. You  can add  this string  to a
+      header, commonly named "X-Brightmail-Tracker". Example:
+
+      localuser:
+        driver = accept
+        check_local_user
+        headers_add = X-Brightmail-Tracker: $bmi_base64_tracker_verdict
+        transport = local_delivery
+
+      If there is no verdict available for the recipient being
+      routed, this variable contains the empty string.
+
+    o $bmi_alt_location
+
+      If  the  verdict  is  to  redirect  the  message  to  an
+      alternate  location,  this  variable  will  contain  the
+      alternate location string returned by the BMI server. In
+      its default configuration, this is a header-like  string
+      that can be added to the message with "headers_add".  If
+      there is  no verdict  available for  the recipient being
+      routed, or if the  message is to be  delivered normally,
+      this variable contains the empty string.
+
+    o $bmi_deliver
+
+      This is an additional integer variable that can be  used
+      to query if the message should be delivered at all.  You
+      should use router preconditions instead if possible.
+
+      $bmi_deliver is '0': the message should NOT be delivered.
+      $bmi_deliver is '1': the message should be delivered.
+
+
+  IMPORTANT NOTE: Verdict inheritance.
+  The  message  is passed  to  the BMI  server  during message
+  reception,  using the  target addresses  from the  RCPT TO:
+  commands in the SMTP transaction. If recipients get expanded
+  or re-written (for example by aliasing), the new address(es)
+  inherit the  verdict from  the original  address. This means
+  that verdicts also apply to all "child" addresses  generated
+  from top-level addresses that were sent to the BMI server.
+
+
+5) Using per-recipient opt-in information (Optional)
+
+  The  BMI server  features multiple  scanning "profiles"  for
+  individual recipients.  These are  usually stored  in a LDAP
+  server and are  queried by the  BMI server itself.  However,
+  you can also  pass opt-in data  for each recipient  from the
+  MTA to the  BMI server. This  is particularly useful  if you
+  already look  up recipient  data in  Exim anyway  (which can
+  also be  stored in  a SQL  database or  other source).  This
+  implementation enables you  to pass opt-in  data to the  BMI
+  server  in  the  RCPT   ACL.  This  works  by   setting  the
+  'bmi_optin' modifier in  a block of  that ACL. If  should be
+  set to a list  of comma-separated strings that  identify the
+  features which the BMI server should use for that particular
+  recipient. Ideally, you  would use the  'bmi_optin' modifier
+  in the same  ACL block where  you set the  'bmi_run' control
+  flag. Here is an example that will pull opt-in data for each
+  recipient      from       a      flat       file      called
+  '/etc/exim/bmi_optin_data'.
+
+  The file format:
+
+    user1@mydomain.com: <OPTIN STRING1>:<OPTIN STRING2>
+    user2@thatdomain.com: <OPTIN STRING3>
+
+
+  The example:
+
+    accept  domains       = +relay_to_domains
+            endpass
+            verify        = recipient
+            bmi_optin     = ${lookup{$local_part@$domain}lsearch{/etc/exim/bmi_optin_data}}
+            control       = bmi_run
+
+  Of course,  you can  also use  any other  lookup method that
+  Exim supports, including LDAP, Postgres, MySQL, Oracle etc.,
+  as long as  the result is  a list of  colon-separated opt-in
+  strings.
+
+  For a list of available opt-in strings, please contact  your
+  Brightmail representative.
+
+
+
+
+DCC Support
+--------------------------------------------------------------
+Distributed Checksum Clearinghouse; http://www.rhyolite.com/dcc/
+
+*) Building exim
+
+In order to build exim with DCC support add
+
+EXPERIMENTAL_DCC=yes
+
+to your Makefile. (Re-)build/install exim. exim -d should show
+EXPERIMENTAL_DCC under "Support for".
+
+
+*) Configuration
+
+In the main section of exim.cf add at least
+  dccifd_address = /usr/local/dcc/var/dccifd
+or
+  dccifd_address = <ip> <port>
+
+In the DATA ACL you can use the new condition
+        dcc = *
+
+After that "$dcc_header" contains the X-DCC-Header.
+
+Return values are:
+  fail    for overall "R", "G" from dccifd
+  defer   for overall "T" from dccifd
+  accept  for overall "A", "S" from dccifd
+
+dcc = */defer_ok works as for spamd.
+
+The "$dcc_result" variable contains the overall result from DCC
+answer.  There will an X-DCC: header added to the mail.
+
+Usually you'll use
+  defer   !dcc = *
+to greylist with DCC.
+
+If you set, in the main section,
+  dcc_direct_add_header = true
+then the dcc header will be added "in deep" and if the spool
+file was already written it gets removed. This forces Exim to
+write it again if needed.  This helps to get the DCC Header
+through to eg. SpamAssassin.
+
+If you want to pass even more headers in the middle of the
+DATA stage you can set
+  $acl_m_dcc_add_header
+to tell the DCC routines to add more information; eg, you might set
+this to some results from ClamAV.  Be careful.  Header syntax is
+not checked and is added "as is".
+
+In case you've troubles with sites sending the same queue items from several
+hosts and fail to get through greylisting you can use
+$acl_m_dcc_override_client_ip
+
+Setting $acl_m_dcc_override_client_ip to an IP address overrides the default
+of $sender_host_address. eg. use the following ACL in DATA stage:
+
+  warn    set acl_m_dcc_override_client_ip = \
+    ${lookup{$sender_helo_name}nwildlsearch{/etc/mail/multipleip_sites}{$value}{}}
+          condition = ${if def:acl_m_dcc_override_client_ip}
+          log_message = dbg: acl_m_dcc_override_client_ip set to \
+                        $acl_m_dcc_override_client_ip
+
+Then set something like
+# cat /etc/mail/multipleip_sites
+mout-xforward.gmx.net           82.165.159.12
+mout.gmx.net                    212.227.15.16
+
+Use a reasonable IP. eg. one the sending cluster actually uses.
+
+
+
+DSN extra information
+---------------------
+If compiled with EXPERIMENTAL_DSN_INFO extra information will be added
+to DSN fail messages ("bounces"), when available.  The intent is to aid
+tracing of specific failing messages, when presented with a "bounce"
+complaint and needing to search logs.
+
+
+The remote MTA IP address, with port number if nonstandard.
+Example:
+  Remote-MTA: X-ip; [127.0.0.1]:587
+Rationale:
+  Several addresses may correspond to the (already available)
+  dns name for the remote MTA.
+
+The remote MTA connect-time greeting.
+Example:
+  X-Remote-MTA-smtp-greeting: X-str; 220 the.local.host.name ESMTP Exim x.yz Tue, 2 Mar 1999 09:44:33 +0000
+Rationale:
+  This string sometimes presents the remote MTA's idea of its
+  own name, and sometimes identifies the MTA software.
+
+The remote MTA response to HELO or EHLO.
+Example:
+  X-Remote-MTA-helo-response: X-str; 250-the.local.host.name Hello localhost [127.0.0.1]
+Limitations:
+  Only the first line of a multiline response is recorded.
+Rationale:
+  This string sometimes presents the remote MTA's view of
+  the peer IP connecting to it.
+
+The reporting MTA detailed diagnostic.
+Example:
+  X-Exim-Diagnostic: X-str; SMTP error from remote mail server after RCPT TO:<d3@myhost.test.ex>: 550 hard error
+Rationale:
+  This string sometimes give extra information over the
+  existing (already available) Diagnostic-Code field.
+
+
+Note that non-RFC-documented field names and data types are used.
+
+
+Queuefile transport
+-------------------
+Queuefile is a pseudo transport which does not perform final delivery.
+It simply copies the exim spool files out of the spool directory into
+an external directory retaining the exim spool format.
+
+The spool files can then be processed by external processes and then
+requeued into exim spool directories for final delivery.
+However, note carefully the warnings in the main documentation on
+qpool file formats.
+
+The motivation/inspiration for the transport is to allow external
+processes to access email queued by exim and have access to all the
+information which would not be available if the messages were delivered
+to the process in the standard email formats.
+
+The mailscanner package is one of the processes that can take advantage
+of this transport to filter email.
+
+The transport can be used in the same way as the other existing transports,
+i.e by configuring a router to route mail to a transport configured with
+the queuefile driver.
+
+The transport only takes one option:
+
+* directory - This is used to specify the directory messages should be
+copied to.  Expanded.
+
+The generic transport options (body_only, current_directory, disable_logging,
+debug_print, delivery_date_add, envelope_to_add, event_action, group,
+headers_add, headers_only, headers_remove, headers_rewrite, home_directory,
+initgroups, max_parallel, message_size_limit, rcpt_include_affixes,
+retry_use_local_part, return_path, return_path_add, shadow_condition,
+shadow_transport, transport_filter, transport_filter_timeout, user) are
+ignored.
+
+Sample configuration:
+
+(Router)
+
+scan:
+   driver = accept
+   transport = scan
+
+(Transport)
+
+scan:
+  driver = queuefile
+  directory = /var/spool/baruwa-scanner/input
+
+
+In order to build exim with Queuefile transport support add or uncomment
+
+EXPERIMENTAL_QUEUEFILE=yes
+
+to your Local/Makefile. (Re-)build/install exim. exim -d should show
+Experimental_QUEUEFILE in the line "Support for:".
+
+
+ARC support
+-----------
+Specification: https://tools.ietf.org/html/draft-ietf-dmarc-arc-protocol-11
+Note that this is not an RFC yet, so may change.
+
+[RFC 8617 was published 2019/06.  Draft 11 was 2018/01.  A review of the
+changes has not yet been done]
+
+ARC is intended to support the utility of SPF and DKIM in the presence of
+intermediaries in the transmission path - forwarders and mailinglists -
+by establishing a cryptographically-signed chain in headers.
+
+Normally one would only bother doing ARC-signing when functioning as
+an intermediary.  One might do verify for local destinations.
+
+ARC uses the notion of a "ADministrative Management Domain" (ADMD).
+Described in RFC 5598 (section 2.3), this is essentially a set of
+mail-handling systems that mail transits that are all under the control
+of one organisation.  A label should be chosen to identify the ADMD.
+Messages should be ARC-verified on entry to the ADMD, and ARC-signed on exit
+from it.
+
+
+Building with ARC Support
+--
+Enable using EXPERIMENTAL_ARC=yes in your Local/Makefile.
+You must also have DKIM present (not disabled), and you very likely
+want to have SPF enabled.
+
+
+Verification
+--
+An ACL condition is provided to perform the "verifier actions" detailed
+in section 6 of the above specification.  It may be called from the DATA ACL
+and succeeds if the result matches any of a given list.
+It also records the highest ARC instance number (the chain size)
+and verification result for later use in creating an Authentication-Results:
+standard header.
+
+  verify = arc/<acceptable_list>   none:fail:pass
+
+  add_header = :at_start:${authresults {<admd-identifier>}}
+
+	Note that it would be wise to strip incoming messages of A-R headers
+	that claim to be from our own <admd-identifier>.
+
+There are four new variables:
+
+  $arc_state		One of pass, fail, none
+  $arc_state_reason	(if fail, why)
+  $arc_domains		colon-sep list of ARC chain domains, in chain order.
+			problematic elements may have empty list elements
+  $arc_oldest_pass	lowest passing instance number of chain
+
+Example:
+  logwrite = oldest-p-ams: <${reduce {$lh_ARC-Authentication-Results:} \
+				{} \
+				{${if = {$arc_oldest_pass} \
+					{${extract {i}{${extract {1}{;}{$item}}}}} \
+					{$item} {$value}}} \
+			    }>
+
+Receive log lines for an ARC pass will be tagged "ARC".
+
+
+Signing
+--
+arc_sign = <admd-identifier> : <selector> : <privkey> [ : <options> ]
+An option on the smtp transport, which constructs and prepends to the message
+an ARC set of headers.  The textually-first Authentication-Results: header
+is used as a basis (you must have added one on entry to the ADMD).
+Expanded as a whole; if unset, empty or forced-failure then no signing is done.
+If it is set, all of the first three elements must be non-empty.
+
+The fourth element is optional, and if present consists of a comma-separated list
+of options.  The options implemented are
+
+  timestamps    	Add a t= tag to the generated AMS and AS headers, with the
+                	current time.
+  expire[=<val>]	Add an x= tag to the generated AMS header, with an expiry time.
+			If the value <val> is an plain number it is used unchanged.
+			If it starts with a '+' then the following number is added
+                	to the current time, as an offset in seconds.
+			If a value is not given it defaults to a one month offset.
+
+[As of writing, gmail insist that a t= tag on the AS is mandatory]
+
+Caveats:
+ * There must be an Authentication-Results header, presumably added by an ACL
+   while receiving the message, for the same ADMD, for arc_sign to succeed.
+   This requires careful coordination between inbound and outbound logic.
+
+   Only one A-R header is taken account of.  This is a limitation versus
+   the ARC spec (which says that all A-R headers from within the ADMD must
+   be used).
+
+ * If passing a message to another system, such as a mailing-list manager
+   (MLM), between receipt and sending, be wary of manipulations to headers made
+   by the MLM.
+   + For instance, Mailman with REMOVE_DKIM_HEADERS==3 might improve
+     deliverability in a pre-ARC world, but that option also renames the
+     Authentication-Results header, which breaks signing.
+
+ * Even if you use multiple DKIM keys for different domains, the ARC concept
+   should try to stick to one ADMD, so pick a primary domain and use that for
+   AR headers and outbound signing.
+
+Signing is not compatible with cutthrough delivery; any (before expansion)
+value set for the option will result in cutthrough delivery not being
+used via the transport in question.
+
+
+
+Dovecot authenticator via inet socket
+--------------------------------------------------------------
+If Dovecot is configured similar to :-
+
+service auth {
+...
+#SASL
+  inet_listener {
+    name = exim
+    port = 12345
+  }
+...
+}
+
+then an Exim authenticator can be configured :-
+
+  dovecot-plain:
+    driver =		dovecot
+    public_name =	PLAIN
+    server_socket =	dovecot_server_name 12345
+    server_tls =	true
+    server_set_id =	$auth1
+
+If the server_socket does not start with a / it is taken as a hostname (or IP);
+and a whitespace-separated port number must be given.
+
+
+
+
+Logging protocol unusual states
+---------------------------------------------------------------
+An extra log_selector, "protocol_detail" has been added in the default build.
+The name may change in future, hence the Experimenal status.
+
+Currrently the only effect is to enable logging, under TLS,
+of a TCP RST received directly after a QUIT (in server mode).
+
+Outlook is consistently doing this; not waiting for the SMTP response
+to its QUIT, not properly closing the TLS session and not properly closing
+the TCP connection.  Previously this resulted is an error from SSL_write
+being logged.
+
+
+
+Limits ESMTP extension
+---------------------------------------------------------------
+Per https://datatracker.ietf.org/doc/html/draft-freed-smtp-limits-01
+
+If compiled with EXPERIMENTAL_ESMTP_LIMITS=yes :-
+
+As a server, Exim will advertise, in the EHLO response, the limit for RCPT
+commands set by the recipients_max main-section config option (if it is set),
+and the limit for MAIL commands set by the smtp_accept_max_per_connection
+option.
+
+Note that as of writing, smtp_accept_max_per_connection is expanded but
+recipients_max is not.
+
+A new main-section option "limits_advertise_hosts" controls whether
+the limits are advertised; the default for the option is "*".
+
+As a client, Exim will:
+
+ - note an advertised MAILMAX; the lower of the value given and the
+ value from the transport connection_max_messages option is used.
+
+ - note an advertised RCPTMAX; the lower of the
+ value given and the value from the transport max_rcpt option is used.
+ Parallisation of transactions is not done if due to a RCPTMAX, unlike
+ max_rcpt.
+
+ - note an advertised RCPTDOMAINMAX, and behave as if the transport
+ multi_domains option was set to false.  The value advertised is ignored.
+
+Values advertised are only noted for TLS connections and ones for which
+the server does not advertise TLS support.
+
+
+--------------------------------------------------------------
+End of file
+--------------------------------------------------------------
diff --git a/doc/filter.txt b/doc/filter.txt
new file mode 100644
index 0000000..010979b
--- /dev/null
+++ b/doc/filter.txt
@@ -0,0 +1,1720 @@
+Exim's interfaces to mail filtering
+
+Philip Hazel
+
+Copyright (c) 2021 The Exim Maintainers
+
+Revision 4.96  25 Jun 2022 PH
+
+-------------------------------------------------------------------------------
+
+TABLE OF CONTENTS
+
+1. Forwarding and filtering in Exim
+    1.1. Introduction
+    1.2. Filter operation
+    1.3. Testing a new filter file
+    1.4. Installing a filter file
+    1.5. Testing an installed filter file
+    1.6. Details of filtering commands
+2. Sieve filter files
+    2.1. Recognition of Sieve filters
+    2.2. Saving to specified folders
+    2.3. Strings containing header names
+    2.4. Exists test with empty list of headers
+    2.5. Header test with invalid MIME encoding in header
+    2.6. Address test for multiple addresses per header
+    2.7. Semantics of keep
+    2.8. Semantics of fileinto
+    2.9. Semantics of redirect
+    2.10. String arguments
+    2.11. Number units
+    2.12. RFC compliance
+3. Exim filter files
+    3.1. Format of Exim filter files
+    3.2. Data values in filter commands
+    3.3. String expansion
+    3.4. Some useful general variables
+    3.5. Header variables
+    3.6. User variables
+    3.7. Current directory
+    3.8. Significant deliveries
+    3.9. Filter commands
+    3.10. The add command
+    3.11. The deliver command
+    3.12. The save command
+    3.13. The pipe command
+    3.14. Mail commands
+    3.15. Logging commands
+    3.16. The finish command
+    3.17. The testprint command
+    3.18. The fail command
+    3.19. The freeze command
+    3.20. The headers command
+    3.21. Obeying commands conditionally
+    3.22. String testing conditions
+    3.23. Numeric testing conditions
+    3.24. Testing for significant deliveries
+    3.25. Testing for error messages
+    3.26. Testing a list of addresses
+    3.27. Testing for personal mail
+    3.28. Alias addresses for the personal condition
+    3.29. Details of the personal condition
+    3.30. Testing delivery status
+    3.31. Multiple personal mailboxes
+    3.32. Ignoring delivery errors
+    3.33. Examples of Exim filter commands
+
+
+
+===============================================================================
+1. FORWARDING AND FILTERING IN EXIM
+
+This document describes the user interfaces to Exim's in-built mail filtering
+facilities, and is copyright (c) The Exim Maintainers 2021. It corresponds to
+Exim version 4.96.
+
+
+1.1 Introduction
+----------------
+
+Most Unix mail transfer agents (programs that deliver mail) permit individual
+users to specify automatic forwarding of their mail, usually by placing a list
+of forwarding addresses in a file called .forward in their home directories.
+Exim extends this facility by allowing the forwarding instructions to be a set
+of rules rather than just a list of addresses, in effect providing ".forward
+with conditions". Operating the set of rules is called filtering, and the file
+that contains them is called a filter file.
+
+Exim supports two different kinds of filter file. An Exim filter contains
+instructions in a format that is unique to Exim. A Sieve filter contains
+instructions in the Sieve format that is defined by RFC 3028. As this is a
+standard format, Sieve filter files may already be familiar to some users.
+Sieve files should also be portable between different environments. However,
+the Exim filtering facility contains more features (such as variable
+expansion), and better integration with the host environment (such as the use
+of external processes and pipes).
+
+The choice of which kind of filter to use can be left to the end-user, provided
+that the system administrator has configured Exim appropriately for both kinds
+of filter. However, if interoperability is important, Sieve is the only choice.
+
+The ability to use filtering or traditional forwarding has to be enabled by the
+system administrator, and some of the individual facilities can be separately
+enabled or disabled. A local document should be provided to describe exactly
+what has been enabled. In the absence of this, consult your system
+administrator.
+
+This document describes how to use a filter file and the format of its
+contents. It is intended for use by end-users. Both Sieve filters and Exim
+filters are covered. However, for Sieve filters, only issues that relate to the
+Exim implementation are discussed, since Sieve itself is described elsewhere.
+
+The contents of traditional .forward files are not described here. They
+normally contain just a list of addresses, file names, or pipe commands,
+separated by commas or newlines, but other types of item are also available.
+The full details can be found in the chapter on the redirect router in the Exim
+specification, which also describes how the system administrator can set up and
+control the use of filtering.
+
+
+1.2 Filter operation
+--------------------
+
+It is important to realize that, in Exim, no deliveries are actually made while
+a filter or traditional .forward file is being processed. Running a filter or
+processing a traditional .forward file sets up future delivery operations, but
+does not carry them out.
+
+The result of filter or .forward file processing is a list of destinations to
+which a message should be delivered. The deliveries themselves take place
+later, along with all other deliveries for the message. This means that it is
+not possible to test for successful deliveries while filtering. It also means
+that any duplicate addresses that are generated are dropped, because Exim never
+delivers the same message to the same address more than once.
+
+
+1.3 Testing a new filter file
+-----------------------------
+
+Filter files, especially the more complicated ones, should always be tested, as
+it is easy to make mistakes. Exim provides a facility for preliminary testing
+of a filter file before installing it. This tests the syntax of the file and
+its basic operation, and can also be used with traditional .forward files.
+
+Because a filter can do tests on the content of messages, a test message is
+required. Suppose you have a new filter file called myfilter and a test message
+in a file called test-message. Assuming that Exim is installed with the
+conventional path name /usr/sbin/sendmail (some operating systems use /usr/lib/
+sendmail), the following command can be used:
+
+/usr/sbin/sendmail -bf myfilter <test-message
+
+The -bf option tells Exim that the following item on the command line is the
+name of a filter file that is to be tested. There is also a -bF option, which
+is similar, but which is used for testing system filter files, as opposed to
+user filter files, and which is therefore of use only to the system
+administrator.
+
+The test message is supplied on the standard input. If there are no
+message-dependent tests in the filter, an empty file (/dev/null) can be used. A
+supplied message must start with header lines or the "From " message separator
+line that is found in many multi-message folder files. Note that blank lines at
+the start terminate the header lines. A warning is given if no header lines are
+read.
+
+The result of running this command, provided no errors are detected in the
+filter file, is a list of the actions that Exim would try to take if presented
+with the message for real. For example, for an Exim filter, the output
+
+Deliver message to: gulliver@lilliput.fict.example
+Save message to: /home/lemuel/mail/archive
+
+means that one copy of the message would be sent to 
+gulliver@lilliput.fict.example, and another would be added to the file /home/
+lemuel/mail/archive, if all went well.
+
+The actions themselves are not attempted while testing a filter file in this
+way; there is no check, for example, that any forwarding addresses are valid.
+For an Exim filter, if you want to know why a particular action is being taken,
+add the -v option to the command. This causes Exim to output the results of any
+conditional tests and to indent its output according to the depth of nesting of
+if commands. Further additional output from a filter test can be generated by
+the testprint command, which is described below.
+
+When Exim is outputting a list of the actions it would take, if any text
+strings are included in the output, non-printing characters therein are
+converted to escape sequences. In particular, if any text string contains a
+newline character, this is shown as "\n" in the testing output.
+
+When testing a filter in this way, Exim makes up an "envelope" for the message.
+The recipient is by default the user running the command, and so is the sender,
+but the command can be run with the -f option to supply a different sender. For
+example,
+
+/usr/sbin/sendmail -bf myfilter \
+   -f islington@never.where <test-message
+
+Alternatively, if the -f option is not used, but the first line of the supplied
+message is a "From " separator from a message folder file (not the same thing
+as a From: header line), the sender is taken from there. If -f is present, the
+contents of any "From " line are ignored.
+
+The "return path" is the same as the envelope sender, unless the message
+contains a Return-path: header, in which case it is taken from there. You need
+not worry about any of this unless you want to test out features of a filter
+file that rely on the sender address or the return path.
+
+It is possible to change the envelope recipient by specifying further options.
+The -bfd option changes the domain of the recipient address, while the -bfl
+option changes the "local part", that is, the part before the @ sign. An
+adviser could make use of these to test someone else's filter file.
+
+The -bfp and -bfs options specify the prefix or suffix for the local part.
+These are relevant only when support for multiple personal mailboxes is
+implemented; see the description in section 3.31 below.
+
+
+1.4 Installing a filter file
+----------------------------
+
+A filter file is normally installed under the name .forward in your home
+directory - it is distinguished from a conventional .forward file by its first
+line (described below). However, the file name is configurable, and some system
+administrators may choose to use some different name or location for filter
+files.
+
+
+1.5 Testing an installed filter file
+------------------------------------
+
+Testing a filter file before installation cannot find every potential problem;
+for example, it does not actually run commands to which messages are piped.
+Some "live" tests should therefore also be done once a filter is installed.
+
+If at all possible, test your filter file by sending messages from some other
+account. If you send a message to yourself from the filtered account, and
+delivery fails, the error message will be sent back to the same account, which
+may cause another delivery failure. It won't cause an infinite sequence of such
+messages, because delivery failure messages do not themselves generate further
+messages. However, it does mean that the failure won't be returned to you, and
+also that the postmaster will have to investigate the stuck message.
+
+If you have to test an Exim filter from the same account, a sensible precaution
+is to include the line
+
+if error_message then finish endif
+
+as the first filter command, at least while testing. This causes filtering to
+be abandoned for a delivery failure message, and since no destinations are
+generated, the message goes on to be delivered to the original address. Unless
+there is a good reason for not doing so, it is recommended that the above test
+be left in all Exim filter files. (This does not apply to Sieve files.)
+
+
+1.6 Details of filtering commands
+---------------------------------
+
+The filtering commands for Sieve and Exim filters are completely different in
+syntax and semantics. The Sieve mechanism is defined in RFC 3028; in the next
+chapter we describe how it is integrated into Exim. The subsequent chapter
+covers Exim filtering commands in detail.
+
+
+
+===============================================================================
+2. SIEVE FILTER FILES
+
+The code for Sieve filtering in Exim was contributed by Michael Haardt, and
+most of the content of this chapter is taken from the notes he provided. Since
+Sieve is an extensible language, it is important to understand "Sieve" in this
+context as "the specific implementation of Sieve for Exim".
+
+This chapter does not contain a description of Sieve, since that can be found
+in RFC 3028, which should be read in conjunction with these notes.
+
+The Exim Sieve implementation offers the core as defined by RFC 3028,
+comparison tests, the subaddress parameter, the copy, envelope, fileinto, 
+notify, and vacation extensions, but not the reject extension. Exim does not
+support message delivery notifications (MDNs), so adding it just to the Sieve
+filter (as required for reject) makes little sense.
+
+In order for Sieve to work properly in Exim, the system administrator needs to
+make some adjustments to the Exim configuration. These are described in the
+chapter on the redirect router in the full Exim specification.
+
+
+2.1 Recognition of Sieve filters
+--------------------------------
+
+A filter file is interpreted as a Sieve filter if its first line is
+
+# Sieve filter
+
+This is what distinguishes it from a conventional .forward file or an Exim
+filter file.
+
+
+2.2 Saving to specified folders
+-------------------------------
+
+If the system administrator has set things up as suggested in the Exim
+specification, and you use keep or fileinto to save a mail into a folder,
+absolute files are stored where specified, relative files are stored relative
+to $home, and inbox goes to the standard mailbox location.
+
+
+2.3 Strings containing header names
+-----------------------------------
+
+RFC 3028 does not specify what happens if a string denoting a header field does
+not contain a valid header name, for example, it contains a colon. This
+implementation generates an error instead of ignoring the header field in order
+to ease script debugging, which fits in with the common picture of Sieve.
+
+
+2.4 Exists test with empty list of headers
+------------------------------------------
+
+The exists test succeeds only if all the specified headers exist. RFC 3028 does
+not explicitly specify what happens on an empty list of headers. This
+implementation evaluates that condition as true, interpreting the RFC in a
+strict sense.
+
+
+2.5 Header test with invalid MIME encoding in header
+----------------------------------------------------
+
+Some MUAs process invalid base64 encoded data, generating junk. Others ignore
+junk after seeing an equal sign in base64 encoded data. RFC 2047 does not
+specify how to react in this case, other than stating that a client must not
+forbid to process a message for that reason. RFC 2045 specifies that invalid
+data should be ignored (apparently looking at end of line characters). It also
+specifies that invalid data may lead to rejecting messages containing them (and
+there it appears to talk about true encoding violations), which is a clear
+contradiction to ignoring them.
+
+RFC 3028 does not specify how to process incorrect MIME words. This
+implementation treats them literally, as it does if the word is correct but its
+character set cannot be converted to UTF-8.
+
+
+2.6 Address test for multiple addresses per header
+--------------------------------------------------
+
+A header may contain multiple addresses. RFC 3028 does not explicitly specify
+how to deal with them, but since the address test checks if anything matches
+anything else, matching one address suffices to satisfy the condition. That
+makes it impossible to test if a header contains a certain set of addresses and
+no more, but it is more logical than letting the test fail if the header
+contains an additional address besides the one the test checks for.
+
+
+2.7 Semantics of keep
+---------------------
+
+The keep command is equivalent to
+
+fileinto "inbox";
+
+It saves the message and resets the implicit keep flag. It does not set the
+implicit keep flag; there is no command to set it once it has been reset.
+
+
+2.8 Semantics of fileinto
+-------------------------
+
+RFC 3028 does not specify whether fileinto should try to create a mail folder
+if it does not exist. This implementation allows the sysadmin to configure that
+aspect using the appendfile transport options create_directory, create_file,
+and file_must_exist. See the appendfile transport in the Exim specification for
+details.
+
+
+2.9 Semantics of redirect
+-------------------------
+
+Sieve scripts are supposed to be interoperable between servers, so this
+implementation does not allow mail to be redirected to unqualified addresses,
+because the domain would depend on the system being used. On systems with
+virtual mail domains, the default domain is probably not what the user expects
+it to be.
+
+
+2.10 String arguments
+---------------------
+
+There has been confusion if the string arguments to require are to be matched
+case-sensitively or not. This implementation matches them with the match type 
+:is (default, see section 2.7.1 of the RFC) and the comparator i;ascii-casemap
+(default, see section 2.7.3 of the RFC). The RFC defines the command defaults
+clearly, so any different implementations violate RFC 3028. The same is valid
+for comparator names, also specified as strings.
+
+
+2.11 Number units
+-----------------
+
+There is a mistake in RFC 3028: the suffix G denotes gibi-, not tebibyte. The
+mistake is obvious, because RFC 3028 specifies G to denote 2^30 (which is gibi,
+not tebi), and that is what this implementation uses as the scaling factor for
+the suffix G.
+
+
+2.12 RFC compliance
+-------------------
+
+Exim requires the first line of a Sieve filter to be
+
+# Sieve filter
+
+Of course the RFC does not specify that line. Do not expect examples to work
+without adding it, though.
+
+RFC 3028 requires the use of CRLF to terminate a line. The rationale was that
+CRLF is universally used in network protocols to mark the end of the line. This
+implementation does not embed Sieve in a network protocol, but uses Sieve
+scripts as part of the Exim MTA. Since all parts of Exim use LF as the newline
+character, this implementation does, too, by default, though the system
+administrator may choose (at Exim compile time) to use CRLF instead.
+
+Exim violates RFC 2822, section 3.6.8, by accepting 8-bit header names, so this
+implementation repeats this violation to stay consistent with Exim. This is in
+preparation for UTF-8 data.
+
+Sieve scripts cannot contain NUL characters in strings, but mail headers could
+contain MIME encoded NUL characters, which could never be matched by Sieve
+scripts using exact comparisons. For that reason, this implementation extends
+the Sieve quoted string syntax with \0 to describe a NUL character, violating \
+0 being the same as 0 in RFC 3028. Even without using \0, the following tests
+are all true in this implementation. Implementations that use C-style strings
+will only evaluate the first test as true.
+
+Subject: =?iso-8859-1?q?abc=00def
+
+header :contains "Subject" ["abc"]
+header :contains "Subject" ["def"]
+header :matches "Subject" ["abc?def"]
+
+Note that by considering Sieve to be an MUA, RFC 2047 can be interpreted in a
+way that NUL characters truncating strings is allowed for Sieve
+implementations, although not recommended. It is further allowed to use encoded
+NUL characters in headers, but that's not recommended either. The above example
+shows why.
+
+RFC 3028 states that if an implementation fails to convert a character set to
+UTF-8, two strings cannot be equal if one contains octets greater than 127.
+Assuming that all unknown character sets are one-byte character sets with the
+lower 128 octets being US-ASCII is not sound, so this implementation violates
+RFC 3028 and treats such MIME words literally. That way at least something
+could be matched.
+
+The folder specified by fileinto must not contain the character sequence ".."
+to avoid security problems. RFC 3028 does not specify the syntax of folders
+apart from keep being equivalent to
+
+fileinto "INBOX";
+
+This implementation uses inbox instead.
+
+Sieve script errors currently cause messages to be silently filed into inbox.
+RFC 3028 requires that the user is notified of that condition. This may be
+implemented in the future by adding a header line to mails that are filed into
+inbox due to an error in the filter.
+
+
+
+===============================================================================
+3. EXIM FILTER FILES
+
+This chapter contains a full description of the contents of Exim filter files.
+
+
+3.1 Format of Exim filter files
+-------------------------------
+
+Apart from leading white space, the first text in an Exim filter file must be
+
+# Exim filter
+
+This is what distinguishes it from a conventional .forward file or a Sieve
+filter file. If the file does not have this initial line (or the equivalent for
+a Sieve filter), it is treated as a conventional .forward file, both when
+delivering mail and when using the -bf testing mechanism. The white space in
+the line is optional, and any capitalization may be used. Further text on the
+same line is treated as a comment. For example, you could have
+
+#   Exim filter   <<== do not edit or remove this line!
+
+The remainder of the file is a sequence of filtering commands, which consist of
+keywords and data values. For example, in the command
+
+deliver gulliver@lilliput.fict.example
+
+the keyword is "deliver" and the data value is
+"gulliver@lilliput.fict.example". White space or line breaks separate the
+components of a command, except in the case of conditions for the if command,
+where round brackets (parentheses) also act as separators. Complete commands
+are separated from each other by white space or line breaks; there are no
+special terminators. Thus, several commands may appear on one line, or one
+command may be spread over a number of lines.
+
+If the character # follows a separator anywhere in a command, everything from #
+up to the next newline is ignored. This provides a way of including comments in
+a filter file.
+
+
+3.2 Data values in filter commands
+----------------------------------
+
+There are two ways in which a data value can be input:
+
+  * If the text contains no white space, it can be typed verbatim. However, if
+    it is part of a condition, it must also be free of round brackets
+    (parentheses), as these are used for grouping in conditions.
+
+  * Otherwise, text must be enclosed in double quotation marks. In this case,
+    the character \ (backslash) is treated as an "escape character" within the
+    string, causing the following character or characters to be treated
+    specially:
+
+    \n   is replaced by a newline
+    \r   is replaced by a carriage return
+    \t   is replaced by a tab
+
+Backslash followed by up to three octal digits is replaced by the character
+specified by those digits, and "\x" followed by up to two hexadecimal digits is
+treated similarly. Backslash followed by any other character is replaced by the
+second character, so that in particular, "\"" becomes """ and "\\" becomes "\".
+A data item enclosed in double quotes can be continued onto the next line by
+ending the first line with a backslash. Any leading white space at the start of
+the continuation line is ignored.
+
+In addition to the escape character processing that occurs when strings are
+enclosed in quotes, most data values are also subject to string expansion (as
+described in the next section), in which case the characters "$" and "\" are
+also significant. This means that if a single backslash is actually required in
+such a string, and the string is also quoted, "\\\\" has to be entered.
+
+The maximum permitted length of a data string, before expansion, is 1024
+characters.
+
+
+3.3 String expansion
+--------------------
+
+Most data values are expanded before use. Expansion consists of replacing
+substrings beginning with "$" with other text. The full expansion facilities
+available in Exim are extensive. If you want to know everything that Exim can
+do with strings, you should consult the chapter on string expansion in the Exim
+documentation.
+
+In filter files, by far the most common use of string expansion is the
+substitution of the contents of a variable. For example, the substring
+
+$reply_address
+
+is replaced by the address to which replies to the message should be sent. If
+such a variable name is followed by a letter or digit or underscore, it must be
+enclosed in curly brackets (braces), for example,
+
+${reply_address}
+
+If a "$" character is actually required in an expanded string, it must be
+escaped with a backslash, and because backslash is also an escape character in
+quoted input strings, it must be doubled in that case. The following two
+examples illustrate two different ways of testing for a "$" character in a
+message:
+
+if $message_body contains \$ then ...
+if $message_body contains "\\$" then ...
+
+You can prevent part of a string from being expanded by enclosing it between
+two occurrences of "\N". For example,
+
+if $message_body contains \N$$$$\N then ...
+
+tests for a run of four dollar characters.
+
+
+3.4 Some useful general variables
+---------------------------------
+
+A complete list of the available variables is given in the Exim documentation.
+This shortened list contains the ones that are most likely to be useful in
+personal filter files:
+
+$body_linecount: The number of lines in the body of the message.
+
+$body_zerocount: The number of binary zero characters in the body of the
+message.
+
+$home: In conventional configurations, this variable normally contains the
+user's home directory. The system administrator can, however, change this.
+
+$local_part: The part of the email address that precedes the @ sign - normally
+the user's login name. If support for multiple personal mailboxes is enabled
+(see section 3.31 below) and a prefix or suffix for the local part was
+recognized, it is removed from the string in this variable.
+
+$local_part_prefix: If support for multiple personal mailboxes is enabled (see
+section 3.31 below), and a local part prefix was recognized, this variable
+contains the prefix. Otherwise it contains an empty string.
+
+$local_part_suffix: If support for multiple personal mailboxes is enabled (see
+section 3.31 below), and a local part suffix was recognized, this variable
+contains the suffix. Otherwise it contains an empty string.
+
+$message_body: The initial portion of the body of the message. By default, up
+to 500 characters are read into this variable, but the system administrator can
+configure this to some other value. Newlines in the body are converted into
+single spaces.
+
+$message_body_end: The final portion of the body of the message, formatted and
+limited in the same way as $message_body.
+
+$message_body_size: The size of the body of the message, in bytes.
+
+$message_exim_id: The message's local identification string, which is unique
+for each message handled by a single host.
+
+$message_headers: The header lines of the message, concatenated into a single
+string, with newline characters between them.
+
+$message_size: The size of the entire message, in bytes.
+
+$original_local_part: When an address that arrived with the message is being
+processed, this contains the same value as the variable $local_part. However,
+if an address generated by an alias, forward, or filter file is being
+processed, this variable contains the local part of the original address.
+
+$reply_address: The contents of the Reply-to: header, if the message has one;
+otherwise the contents of the From: header. It is the address to which normal
+replies to the message should be sent.
+
+$return_path: The return path - that is, the sender field that will be
+transmitted as part of the message's envelope if the message is sent to another
+host. This is the address to which delivery errors are sent. In many cases,
+this variable has the same value as $sender_address, but if, for example, an
+incoming message to a mailing list has been expanded, $return_path may have
+been changed to contain the address of the list maintainer.
+
+$sender_address: The sender address that was received in the envelope of the
+message. This is not necessarily the same as the contents of the From: or 
+Sender: header lines. For delivery error messages ("bounce messages") there is
+no sender address, and this variable is empty.
+
+$tod_full: A full version of the time and date, for example: Wed, 18 Oct 1995
+09:51:40 +0100. The timezone is always given as a numerical offset from GMT.
+
+$tod_log: The time and date in the format used for writing Exim's log files,
+without the timezone, for example: 1995-10-12 15:32:29.
+
+$tod_zone: The local timezone offset, for example: +0100.
+
+
+3.5 Header variables
+--------------------
+
+There is a special set of expansion variables containing the header lines of
+the message being processed. These variables have names beginning with $header_
+followed by the name of the header line, terminated by a colon. For example,
+
+$header_from:
+$header_subject:
+
+The whole item, including the terminating colon, is replaced by the contents of
+the message header line. If there is more than one header line with the same
+name, their contents are concatenated. For header lines whose data consists of
+a list of addresses (for example, From: and To:), a comma and newline is
+inserted between each set of data. For all other header lines, just a newline
+is used.
+
+Leading and trailing white space is removed from header line data, and if there
+are any MIME "words" that are encoded as defined by RFC 2047 (because they
+contain non-ASCII characters), they are decoded and translated, if possible, to
+a local character set. Translation is attempted only on operating systems that
+have the iconv() function. This makes the header line look the same as it would
+when displayed by an MUA. The default character set is ISO-8859-1, but this can
+be changed by means of the headers command (see below).
+
+If you want to see the actual characters that make up a header line, you can
+specify $rheader_ instead of $header_. This inserts the "raw" header line,
+unmodified.
+
+There is also an intermediate form, requested by $bheader_, which removes
+leading and trailing space and decodes MIME "words", but does not do any
+character translation. If an attempt to decode what looks superficially like a
+MIME "word" fails, the raw string is returned. If decoding produces a binary
+zero character, it is replaced by a question mark.
+
+The capitalization of the name following $header_ is not significant. Because
+any printing character except colon may appear in the name of a message's
+header (this is a requirement of RFC 2822, the document that describes the
+format of a mail message) curly brackets must not be used in this case, as they
+will be taken as part of the header name. Two shortcuts are allowed in naming
+header variables:
+
+  * The initiating $header_, $rheader_, or $bheader_ can be abbreviated to $h_,
+    $rh_, or $bh_, respectively.
+
+  * The terminating colon can be omitted if the next character is white space.
+    The white space character is retained in the expanded string. However, this
+    is not recommended, because it makes it easy to forget the colon when it
+    really is needed.
+
+If the message does not contain a header of the given name, an empty string is
+substituted. Thus it is important to spell the names of headers correctly. Do
+not use $header_Reply_to when you really mean $header_Reply-to.
+
+
+3.6 User variables
+------------------
+
+There are ten user variables with names $n0 - $n9 that can be incremented by
+the add command (see section 3.10). These can be used for "scoring" messages in
+various ways. If Exim is configured to run a "system filter" on every message,
+the values left in these variables are copied into the variables $sn0 - $sn9 at
+the end of the system filter, thus making them available to users' filter
+files. How these values are used is entirely up to the individual installation.
+
+
+3.7 Current directory
+---------------------
+
+The contents of your filter file should not make any assumptions about the
+current directory. It is best to use absolute paths for file names; you can
+normally make use of the $home variable to refer to your home directory. The 
+save command automatically inserts $home at the start of non-absolute paths.
+
+
+3.8 Significant deliveries
+--------------------------
+
+When in the course of delivery a message is processed by a filter file, what
+happens next, that is, after the filter file has been processed, depends on
+whether or not the filter sets up any significant deliveries. If at least one
+significant delivery is set up, the filter is considered to have handled the
+entire delivery arrangements for the current address, and no further processing
+of the address takes place. If, however, no significant deliveries are set up,
+Exim continues processing the current address as if there were no filter file,
+and typically sets up a delivery of a copy of the message into a local mailbox.
+In particular, this happens in the special case of a filter file containing
+only comments.
+
+The delivery commands deliver, save, and pipe are by default significant.
+However, if such a command is preceded by the word "unseen", its delivery is
+not considered to be significant. In contrast, other commands such as mail and 
+vacation do not set up significant deliveries unless preceded by the word
+"seen". The following example commands set up significant deliveries:
+
+deliver jack@beanstalk.example
+pipe $home/bin/mymailscript
+seen mail subject "message discarded"
+seen finish
+
+The following example commands do not set up significant deliveries:
+
+unseen deliver jack@beanstalk.example
+unseen pipe $home/bin/mymailscript
+mail subject "message discarded"
+finish
+
+
+3.9 Filter commands
+-------------------
+
+The filter commands that are described in subsequent sections are listed below,
+with the section in which they are described in brackets:
+
+add         increment a user variable (section 3.10)
+deliver     deliver to an email address (section 3.11)
+fail        force delivery failure (sysadmin use) (section 3.18)
+finish      end processing (section 3.16)
+freeze      freeze message (sysadmin use) (section 3.19)
+headers     set the header character set (section 3.20)
+if          test condition(s) (section 3.21)
+logfile     define log file (section 3.15)
+logwrite    write to log file (section 3.15)
+mail        send a reply message (section 3.14)
+pipe        pipe to a command (section 3.13)
+save        save to a file (section 3.12)
+testprint   print while testing (section 3.17)
+vacation    tailored form of mail (section 3.14)
+
+The headers command has additional parameters that can be used only in a system
+filter. The fail and freeze commands are available only when Exim's filtering
+facilities are being used as a system filter, and are therefore usable only by
+the system administrator and not by ordinary users. They are mentioned only
+briefly in this document; for more information, see the main Exim
+specification.
+
+
+3.10 The add command
+--------------------
+
+     add <number> to <user variable>
+e.g. add 2 to n3
+
+There are 10 user variables of this type, with names $n0 - $n9. Their values
+can be obtained by the normal expansion syntax (for example $n3) in other
+commands. At the start of filtering, these variables all contain zero. Both
+arguments of the add command are expanded before use, making it possible to add
+variables to each other. Subtraction can be obtained by adding negative
+numbers.
+
+
+3.11 The deliver command
+------------------------
+
+     deliver <mail address>
+e.g. deliver "Dr Livingstone <David@somewhere.africa.example>"
+
+This command provides a forwarding operation. The delivery that it sets up is
+significant unless the command is preceded by "unseen" (see section 3.8). The
+message is sent on to the given address, exactly as happens if the address had
+appeared in a traditional .forward file. If you want to deliver the message to
+a number of different addresses, you can use more than one deliver command
+(each one may have only one address). However, duplicate addresses are
+discarded.
+
+To deliver a copy of the message to your normal mailbox, your login name can be
+given as the address. Once an address has been processed by the filtering
+mechanism, an identical generated address will not be so processed again, so
+doing this does not cause a loop.
+
+However, if you have a mail alias, you should not refer to it here. For
+example, if the mail address L.Gulliver is aliased to lg303 then all references
+in Gulliver's .forward file should be to lg303. A reference to the alias will
+not work for messages that are addressed to that alias, since, like .forward
+file processing, aliasing is performed only once on an address, in order to
+avoid looping.
+
+Following the new address, an optional second address, preceded by "errors_to"
+may appear. This changes the address to which delivery errors on the forwarded
+message will be sent. Instead of going to the message's original sender, they
+go to this new address. For ordinary users, the only value that is permitted
+for this address is the user whose filter file is being processed. For example,
+the user lg303 whose mailbox is in the domain lilliput.example could have a
+filter file that contains
+
+deliver jon@elsewhere.example errors_to lg303@lilliput.example
+
+Clearly, using this feature makes sense only in situations where not all
+messages are being forwarded. In particular, bounce messages must not be
+forwarded in this way, as this is likely to create a mail loop if something
+goes wrong.
+
+
+3.12 The save command
+---------------------
+
+     save <file name>
+e.g. save $home/mail/bookfolder
+
+This command specifies that a copy of the message is to be appended to the
+given file (that is, the file is to be used as a mail folder). The delivery
+that save sets up is significant unless the command is preceded by "unseen"
+(see section 3.8).
+
+More than one save command may be obeyed; each one causes a copy of the message
+to be written to its argument file, provided they are different (duplicate save
+commands are ignored).
+
+If the file name does not start with a / character, the contents of the $home
+variable are prepended, unless it is empty, or the system administrator has
+disabled this feature. In conventional configurations, this variable is
+normally set in a user filter to the user's home directory, but the system
+administrator may set it to some other path. In some configurations, $home may
+be unset, or prepending may be disabled, in which case a non-absolute path name
+may be generated. Such configurations convert this to an absolute path when the
+delivery takes place. In a system filter, $home is never set.
+
+The user must of course have permission to write to the file, and the writing
+of the file takes place in a process that is running as the user, under the
+user's primary group. Any secondary groups to which the user may belong are not
+normally taken into account, though the system administrator can configure Exim
+to set them up. In addition, the ability to use this command at all is
+controlled by the system administrator - it may be forbidden on some systems.
+
+An optional mode value may be given after the file name. The value for the mode
+is interpreted as an octal number, even if it does not begin with a zero. For
+example:
+
+save /some/folder 640
+
+This makes it possible for users to override the system-wide mode setting for
+file deliveries, which is normally 600. If an existing file does not have the
+correct mode, it is changed.
+
+An alternative form of delivery may be enabled on your system, in which each
+message is delivered into a new file in a given directory. If this is the case,
+this functionality can be requested by giving the directory name terminated by
+a slash after the save command, for example
+
+save separated/messages/
+
+There are several different formats for such deliveries; check with your system
+administrator or local documentation to find out which (if any) are available
+on your system. If this functionality is not enabled, the use of a path name
+ending in a slash causes an error.
+
+
+3.13 The pipe command
+---------------------
+
+     pipe <command>
+e.g. pipe "$home/bin/countmail $sender_address"
+
+This command specifies that the message is to be delivered to the specified
+command using a pipe. The delivery that it sets up is significant unless the
+command is preceded by "unseen" (see section 3.8). Remember, however, that no
+deliveries are done while the filter is being processed. All deliveries happen
+later on. Therefore, the result of running the pipe is not available to the
+filter.
+
+When the deliveries are done, a separate process is run, and a copy of the
+message is passed on its standard input. The process runs as the user, under
+the user's primary group. Any secondary groups to which the user may belong are
+not normally taken into account, though the system administrator can configure
+Exim to set them up. More than one pipe command may appear; each one causes a
+copy of the message to be written to its argument pipe, provided they are
+different (duplicate pipe commands are ignored).
+
+When the time comes to transport the message, the command supplied to pipe is
+split up by Exim into a command name and a number of arguments. These are
+delimited by white space except for arguments enclosed in double quotes, in
+which case backslash is interpreted as an escape, or in single quotes, in which
+case no escaping is recognized. Note that as the whole command is normally
+supplied in double quotes, a second level of quoting is required for internal
+double quotes. For example:
+
+pipe "$home/myscript \"size is $message_size\""
+
+String expansion is performed on the separate components after the line has
+been split up, and the command is then run directly by Exim; it is not run
+under a shell. Therefore, substitution cannot change the number of arguments,
+nor can quotes, backslashes or other shell metacharacters in variables cause
+confusion.
+
+Documentation for some programs that are normally run via this kind of pipe
+often suggest that the command should start with
+
+IFS=" "
+
+This is a shell command, and should not be present in Exim filter files, since
+it does not normally run the command under a shell.
+
+However, there is an option that the administrator can set to cause a shell to
+be used. In this case, the entire command is expanded as a single string and
+passed to the shell for interpretation. It is recommended that this be avoided
+if at all possible, since it can lead to problems when inserted variables
+contain shell metacharacters.
+
+The default PATH set up for the command is determined by the system
+administrator, usually containing at least /bin and /usr/bin so that common
+commands are available without having to specify an absolute file name.
+However, it is possible for the system administrator to restrict the pipe
+facility so that the command name must not contain any / characters, and must
+be found in one of the directories in the configured PATH. It is also possible
+for the system administrator to lock out the use of the pipe command
+altogether.
+
+When the command is run, a number of environment variables are set up. The
+complete list for pipe deliveries may be found in the Exim reference manual.
+Those that may be useful for pipe deliveries from user filter files are:
+
+DOMAIN               the domain of the address
+HOME                 your home directory
+LOCAL_PART           see below
+LOCAL_PART_PREFIX    see below
+LOCAL_PART_SUFFIX    see below
+LOGNAME              your login name
+MESSAGE_ID           the unique id of the message
+PATH                 the command search path
+RECIPIENT            the complete recipient address
+SENDER               the sender of the message
+SHELL                /bin/sh
+USER                 see below
+
+LOCAL_PART, LOGNAME, and USER are all set to the same value, namely, your login
+id. LOCAL_PART_PREFIX and LOCAL_PART_SUFFIX may be set if Exim is configured to
+recognize prefixes or suffixes in the local parts of addresses. For example, a
+message addressed to pat-suf2@domain.example may cause the filter for user pat
+to be run. If this sets up a pipe delivery, LOCAL_PART_SUFFIX is "-suf2" when
+the pipe command runs. The system administrator has to configure Exim specially
+for this feature to be available.
+
+If you run a command that is a shell script, be very careful in your use of
+data from the incoming message in the commands in your script. RFC 2822 is very
+generous in the characters that are permitted to appear in mail addresses, and
+in particular, an address may begin with a vertical bar or a slash. For this
+reason you should always use quotes round any arguments that involve data from
+the message, like this:
+
+/some/command '$SENDER'
+
+so that inserted shell meta-characters do not cause unwanted effects.
+
+Remember that, as was explained earlier, the pipe command is not run at the
+time the filter file is interpreted. The filter just defines what deliveries
+are required for one particular addressee of a message. The deliveries
+themselves happen later, once Exim has decided everything that needs to be done
+for the message.
+
+A consequence of this is that you cannot inspect the return code from the pipe
+command from within the filter. Nevertheless, the code returned by the command
+is important, because Exim uses it to decide whether the delivery has succeeded
+or failed.
+
+The command should return a zero completion code if all has gone well. Most
+non-zero codes are treated by Exim as indicating a failure of the pipe. This is
+treated as a delivery failure, causing the message to be returned to its
+sender. However, there are some completion codes that are treated as temporary
+errors. The message remains on Exim's spool disk, and the delivery is tried
+again later, though it will ultimately time out if the delivery failures go on
+too long. The completion codes to which this applies can be specified by the
+system administrator; the default values are 73 and 75.
+
+The pipe command should not normally write anything to its standard output or
+standard error file descriptors. If it does, whatever is written is normally
+returned to the sender of the message as a delivery error, though this action
+can be varied by the system administrator.
+
+
+3.14 Mail commands
+------------------
+
+There are two commands that cause the creation of a new mail message, neither
+of which count as a significant delivery unless the command is preceded by the
+word "seen" (see section 3.8). This is a powerful facility, but it should be
+used with care, because of the danger of creating infinite sequences of
+messages. The system administrator can forbid the use of these commands
+altogether.
+
+To help prevent runaway message sequences, these commands have no effect when
+the incoming message is a bounce (delivery error) message, and messages sent by
+this means are treated as if they were reporting delivery errors. Thus, they
+should never themselves cause a bounce message to be returned. The basic
+mail-sending command is
+
+mail [to <address-list>]
+     [cc <address-list>]
+     [bcc <address-list>]
+     [from <address>]
+     [reply_to <address>]
+     [subject <text>]
+     [extra_headers <text>]
+     [text <text>]
+     [[expand] file <filename>]
+     [return message]
+     [log <log file name>]
+     [once <note file name>]
+     [once_repeat <time interval>]
+e.g. mail text "Your message about $h_subject: has been received"
+
+Each <address-list> can contain a number of addresses, separated by commas, in
+the format of a To: or Cc: header line. In fact, the text you supply here is
+copied exactly into the appropriate header line. It may contain additional
+information as well as email addresses. For example:
+
+mail to "Julius Caesar <jc@rome.example>, \
+         <ma@rome.example> (Mark A.)"
+
+Similarly, the texts supplied for from and reply_to are copied into their
+respective header lines.
+
+As a convenience for use in one common case, there is also a command called 
+vacation. It behaves in the same way as mail, except that the defaults for the 
+subject, file, log, once, and once_repeat options are
+
+subject "On vacation"
+expand file .vacation.msg
+log  .vacation.log
+once .vacation
+once_repeat 7d
+
+respectively. These are the same file names and repeat period used by the
+traditional Unix vacation command. The defaults can be overridden by explicit
+settings, but if a file name is given its contents are expanded only if
+explicitly requested.
+
+Warning: The vacation command should always be used conditionally, subject to
+at least the personal condition (see section 3.27 below) so as not to send
+automatic replies to non-personal messages from mailing lists or elsewhere.
+Sending an automatic response to a mailing list or a mailing list manager is an
+Internet Sin.
+
+For both commands, the key/value argument pairs can appear in any order. At
+least one of text or file must appear (except with vacation, where there is a
+default for file); if both are present, the text string appears first in the
+message. If expand precedes file, each line of the file is subject to string
+expansion before it is included in the message.
+
+Several lines of text can be supplied to text by including the escape sequence
+"\n" in the string wherever a newline is required. If the command is output
+during filter file testing, newlines in the text are shown as "\n".
+
+Note that the keyword for creating a Reply-To: header is reply_to, because Exim
+keywords may contain underscores, but not hyphens. If the from keyword is
+present and the given address does not match the user who owns the forward
+file, Exim normally adds a Sender: header to the message, though it can be
+configured not to do this.
+
+The extra_headers keyword allows you to add custom header lines to the message.
+The text supplied must be one or more syntactically valid RFC 2822 header
+lines. You can use "\n" within quoted text to specify newlines between headers,
+and also to define continued header lines. For example:
+
+extra_headers "h1: first\nh2: second\n continued\nh3: third"
+
+No newline should appear at the end of the final header line.
+
+If no to argument appears, the message is sent to the address in the
+$reply_address variable (see section 3.3 above). An In-Reply-To: header is
+automatically included in the created message, giving a reference to the
+message identification of the incoming message.
+
+If return message is specified, the incoming message that caused the filter
+file to be run is added to the end of the message, subject to a maximum size
+limitation.
+
+If a log file is specified, a line is added to it for each message sent.
+
+If a once file is specified, it is used to hold a database for remembering who
+has received a message, and no more than one message is ever sent to any
+particular address, unless once_repeat is set. This specifies a time interval
+after which another copy of the message is sent. The interval is specified as a
+sequence of numbers, each followed by the initial letter of one of "seconds",
+"minutes", "hours", "days", or "weeks". For example,
+
+once_repeat 5d4h
+
+causes a new message to be sent if at least 5 days and 4 hours have elapsed
+since the last one was sent. There must be no white space in a time interval.
+
+Commonly, the file name specified for once is used as the base name for
+direct-access (DBM) file operations. There are a number of different DBM
+libraries in existence. Some operating systems provide one as a default, but
+even in this case a different one may have been used when building Exim. With
+some DBM libraries, specifying once results in two files being created, with
+the suffixes .dir and .pag being added to the given name. With some others a
+single file with the suffix .db is used, or the name is used unchanged.
+
+Using a DBM file for implementing the once feature means that the file grows as
+large as necessary. This is not usually a problem, but some system
+administrators want to put a limit on it. The facility can be configured not to
+use a DBM file, but instead, to use a regular file with a maximum size. The
+data in such a file is searched sequentially, and if the file fills up, the
+oldest entry is deleted to make way for a new one. This means that some
+correspondents may receive a second copy of the message after an unpredictable
+interval. Consult your local information to see if your system is configured
+this way.
+
+More than one mail or vacation command may be obeyed in a single filter run;
+they are all honoured, even when they are to the same recipient.
+
+
+3.15 Logging commands
+---------------------
+
+A log can be kept of actions taken by a filter file. This facility is normally
+available in conventional configurations, but there are some situations where
+it might not be. Also, the system administrator may choose to disable it. Check
+your local information if in doubt.
+
+Logging takes place while the filter file is being interpreted. It does not
+queue up for later like the delivery commands. The reason for this is so that a
+log file need be opened only once for several write operations. There are two
+commands, neither of which constitutes a significant delivery. The first
+defines a file to which logging output is subsequently written:
+
+     logfile <file name>
+e.g. logfile $home/filter.log
+
+The file name must be fully qualified. You can use $home, as in this example,
+to refer to your home directory. The file name may optionally be followed by a
+mode for the file, which is used if the file has to be created. For example,
+
+logfile $home/filter.log 0644
+
+The number is interpreted as octal, even if it does not begin with a zero. The
+default for the mode is 600. It is suggested that the logfile command normally
+appear as the first command in a filter file. Once a log file has been obeyed,
+the logwrite command can be used to write to it:
+
+     logwrite "<some text string>"
+e.g. logwrite "$tod_log $message_id processed"
+
+It is possible to have more than one logfile command, to specify writing to
+different log files in different circumstances. A previously opened log is
+closed on a subsequent logfile command. Writing takes place at the end of the
+file, and a newline character is added to the end of each string if there isn't
+one already there. Newlines can be put in the middle of the string by using the
+"\n" escape sequence. Lines from simultaneous deliveries may get interleaved in
+the file, as there is no interlocking, so you should plan your logging with
+this in mind. However, data should not get lost.
+
+
+3.16 The finish command
+-----------------------
+
+The command finish, which has no arguments, causes Exim to stop interpreting
+the filter file. This is not a significant action unless preceded by "seen". A
+filter file containing only "seen finish" is a black hole.
+
+
+3.17 The testprint command
+--------------------------
+
+It is sometimes helpful to be able to print out the values of variables when
+testing filter files. The command
+
+     testprint <text>
+e.g. testprint "home=$home reply_address=$reply_address"
+
+does nothing when mail is being delivered. However, when the filtering code is
+being tested by means of the -bf option (see section 1.3 above), the value of
+the string is written to the standard output.
+
+
+3.18 The fail command
+---------------------
+
+When Exim's filtering facilities are being used as a system filter, the fail
+command is available, to force delivery failure. Because this command is
+normally usable only by the system administrator, and not enabled for use by
+ordinary users, it is described in more detail in the main Exim specification
+rather than in this document.
+
+
+3.19 The freeze command
+-----------------------
+
+When Exim's filtering facilities are being used as a system filter, the freeze
+command is available, to freeze a message on the queue. Because this command is
+normally usable only by the system administrator, and not enabled for use by
+ordinary users, it is described in more detail in the main Exim specification
+rather than in this document.
+
+
+3.20 The headers command
+------------------------
+
+The headers command can be used to change the target character set that is used
+when translating the contents of encoded header lines for insertion by the
+$header_ mechanism (see section 3.5 above). The default can be set in the Exim
+configuration; if not specified, ISO-8859-1 is used. The only currently
+supported format for the headers command in user filters is as in this example:
+
+headers charset "UTF-8"
+
+That is, headers is followed by the word "charset" and then the name of a
+character set. This particular example would be useful if you wanted to compare
+the contents of a header to a UTF-8 string.
+
+In system filter files, the headers command can be used to add or remove header
+lines from the message. These features are described in the main Exim
+specification.
+
+
+3.21 Obeying commands conditionally
+-----------------------------------
+
+Most of the power of filtering comes from the ability to test conditions and
+obey different commands depending on the outcome. The if command is used to
+specify conditional execution, and its general form is
+
+if    <condition>
+then  <commands>
+elif  <condition>
+then  <commands>
+else  <commands>
+endif
+
+There may be any number of elif and then sections (including none) and the else
+section is also optional. Any number of commands, including nested if commands,
+may appear in any of the <commands> sections.
+
+Conditions can be combined by using the words and and or, and round brackets
+(parentheses) can be used to specify how several conditions are to combine.
+Without brackets, and is more binding than or. For example:
+
+if
+$h_subject: contains "Make money" or
+$h_precedence: is "junk" or
+($h_sender: matches ^\\d{8}@ and not personal) or
+$message_body contains "this is not spam"
+then
+seen finish
+endif
+
+A condition can be preceded by not to negate it, and there are also some
+negative forms of condition that are more English-like.
+
+
+3.22 String testing conditions
+------------------------------
+
+There are a number of conditions that operate on text strings, using the words
+"begins", "ends", "is", "contains" and "matches". If you want to apply the same
+test to more than one header line, you can easily concatenate them into a
+single string for testing, as in this example:
+
+if "$h_to:, $h_cc:" contains me@domain.example then ...
+
+If a string-testing condition name is written in lower case, the testing of
+letters is done without regard to case; if it is written in upper case (for
+example, "CONTAINS"), the case of letters is taken into account.
+
+     <text1> begins <text2>
+     <text1> does not begin <text2>
+e.g. $header_from: begins "Friend@"
+
+A "begins" test checks for the presence of the second string at the start of
+the first, both strings having been expanded.
+
+     <text1> ends <text2>
+     <text1> does not end <text2>
+e.g. $header_from: ends "public.com.example"
+
+An "ends" test checks for the presence of the second string at the end of the
+first, both strings having been expanded.
+
+     <text1> is <text2>
+     <text1> is not <text2>
+e.g. $local_part_suffix is "-foo"
+
+An "is" test does an exact match between the strings, having first expanded
+both strings.
+
+     <text1> contains <text2>
+     <text1> does not contain <text2>
+e.g. $header_subject: contains "evolution"
+
+A "contains" test does a partial string match, having expanded both strings.
+
+     <text1> matches <text2>
+     <text1> does not match <text2>
+e.g. $sender_address matches "(bill|john)@"
+
+For a "matches" test, after expansion of both strings, the second one is
+interpreted as a regular expression. Exim uses the PCRE2 regular expression
+library, which provides regular expressions that are compatible with Perl.
+
+The match succeeds if the regular expression matches any part of the first
+string. If you want a regular expression to match only at the start or end of
+the subject string, you must encode that requirement explicitly, using the "^"
+or "$" metacharacters. The above example, which is not so constrained, matches
+all these addresses:
+
+bill@test.example
+john@some.example
+spoonbill@example.com
+littlejohn@example.com
+
+To match only the first two, you could use this:
+
+if $sender_address matches "^(bill|john)@" then ...
+
+Care must be taken if you need a backslash in a regular expression, because
+backslashes are interpreted as escape characters both by the string expansion
+code and by Exim's normal processing of strings in quotes. For example, if you
+want to test the sender address for a domain ending in .com the regular
+expression is
+
+\.com$
+
+The backslash and dollar sign in that expression have to be escaped when used
+in a filter command, as otherwise they would be interpreted by the expansion
+code. Thus, what you actually write is
+
+if $sender_address matches \\.com\$
+
+An alternative way of handling this is to make use of the "\N" expansion flag
+for suppressing expansion:
+
+if $sender_address matches \N\.com$\N
+
+Everything between the two occurrences of "\N" is copied without change by the
+string expander (and in fact you do not need the final one, because it is at
+the end of the string). If the regular expression is given in quotes (mandatory
+only if it contains white space) you have to write either
+
+if $sender_address matches "\\\\.com\\$"
+
+or
+
+if $sender_address matches "\\N\\.com$\\N"
+
+If the regular expression contains bracketed sub-expressions, numeric variable
+substitutions such as $1 can be used in the subsequent actions after a
+successful match. If the match fails, the values of the numeric variables
+remain unchanged. Previous values are not restored after endif. In other words,
+only one set of values is ever available. If the condition contains several
+sub-conditions connected by and or or, it is the strings extracted from the
+last successful match that are available in subsequent actions. Numeric
+variables from any one sub-condition are also available for use in subsequent
+sub-conditions, because string expansion of a condition occurs just before it
+is tested.
+
+
+3.23 Numeric testing conditions
+-------------------------------
+
+The following conditions are available for performing numerical tests:
+
+     <number1> is above <number2>
+     <number1> is not above <number2>
+     <number1> is below <number2>
+     <number1> is not below <number2>
+e.g. $message_size is not above 10k
+
+The <number> arguments must expand to strings of digits, optionally followed by
+one of the letters K or M (upper case or lower case) which cause multiplication
+by 1024 and 1024x1024 respectively.
+
+
+3.24 Testing for significant deliveries
+---------------------------------------
+
+You can use the delivered condition to test whether or not any previously
+obeyed filter commands have set up a significant delivery. For example:
+
+if not delivered then save mail/anomalous endif
+
+"Delivered" is perhaps a poor choice of name for this condition, because the
+message has not actually been delivered; rather, a delivery has been set up for
+later processing.
+
+
+3.25 Testing for error messages
+-------------------------------
+
+The condition error_message is true if the incoming message is a bounce (mail
+delivery error) message. Putting the command
+
+if error_message then finish endif
+
+at the head of your filter file is a useful insurance against things going
+wrong in such a way that you cannot receive delivery error reports. Note: 
+error_message is a condition, not an expansion variable, and therefore is not
+preceded by "$".
+
+
+3.26 Testing a list of addresses
+--------------------------------
+
+There is a facility for looping through a list of addresses and applying a
+condition to each of them. It takes the form
+
+foranyaddress <string> (<condition>)
+
+where <string> is interpreted as a list of RFC 2822 addresses, as in a typical
+header line, and <condition> is any valid filter condition or combination of
+conditions. The "group" syntax that is defined for certain header lines that
+contain addresses is supported.
+
+The parentheses surrounding the condition are mandatory, to delimit it from
+possible further sub-conditions of the enclosing if command. Within the
+condition, the expansion variable $thisaddress is set to the non-comment
+portion of each of the addresses in the string in turn. For example, if the
+string is
+
+B.Simpson <bart@sfld.example>, lisa@sfld.example (his sister)
+
+then $thisaddress would take on the values "bart@sfld.example" and
+"lisa@sfld.example" in turn.
+
+If there are no valid addresses in the list, the whole condition is false. If
+the internal condition is true for any one address, the overall condition is
+true and the loop ends. If the internal condition is false for all addresses in
+the list, the overall condition is false. This example tests for the presence
+of an eight-digit local part in any address in a To: header:
+
+if foranyaddress $h_to: ( $thisaddress matches ^\\d{8}@ ) then ...
+
+When the overall condition is true, the value of $thisaddress in the commands
+that follow then is the last value it took on inside the loop. At the end of
+the if command, the value of $thisaddress is reset to what it was before. It is
+best to avoid the use of multiple occurrences of foranyaddress, nested or
+otherwise, in a single if command, if the value of $thisaddress is to be used
+afterwards, because it isn't always clear what the value will be. Nested if
+commands should be used instead.
+
+Header lines can be joined together if a check is to be applied to more than
+one of them. For example:
+
+if foranyaddress $h_to:,$h_cc: ....
+
+This scans through the addresses in both the To: and the Cc: headers.
+
+
+3.27 Testing for personal mail
+------------------------------
+
+A common requirement is to distinguish between incoming personal mail and mail
+from a mailing list, or from a robot or other automatic process (for example, a
+bounce message). In particular, this test is normally required for "vacation
+messages".
+
+The personal condition checks that the message is not a bounce message and that
+the current user's email address appears in the To: header. It also checks that
+the sender is not the current user or one of a number of common daemons, and
+that there are no header lines starting List- in the message. Finally, it
+checks the content of the Precedence: header line, if there is one.
+
+You should always use the personal condition when generating automatic
+responses. This example shows the use of personal in a filter file that is
+sending out vacation messages:
+
+if personal then
+mail to $reply_address
+subject "I am on holiday"
+file $home/vacation/message
+once $home/vacation/once
+once_repeat 10d
+endif
+
+It is tempting, when writing commands like the above, to quote the original
+subject in the reply. For example:
+
+subject "Re: $h_subject:"
+
+There is a danger in doing this, however. It may allow a third party to
+subscribe you to an opt-in mailing list, provided that the list accepts bounce
+messages as subscription confirmations. (Messages sent from filters are always
+sent as bounce messages.) Well-managed lists require a non-bounce message to
+confirm a subscription, so the danger is relatively small.
+
+If prefixes or suffixes are in use for local parts - something which depends on
+the configuration of Exim (see section 3.31 below) - the tests for the current
+user are done with the full address (including the prefix and suffix, if any)
+as well as with the prefix and suffix removed. If the system is configured to
+rewrite local parts of mail addresses, for example, to rewrite "dag46" as
+"Dirk.Gently", the rewritten form of the address is also used in the tests.
+
+
+3.28 Alias addresses for the personal condition
+-----------------------------------------------
+
+It is quite common for people who have mail accounts on a number of different
+systems to forward all their mail to one system, and in this case a check for
+personal mail should test all their various mail addresses. To allow for this,
+the personal condition keyword can be followed by
+
+alias <address>
+
+any number of times, for example:
+
+if personal alias smith@else.where.example
+            alias jones@other.place.example
+then ...
+
+The alias addresses are treated as alternatives to the current user's email
+address when testing the contents of header lines.
+
+
+3.29 Details of the personal condition
+--------------------------------------
+
+The basic personal test is roughly equivalent to the following:
+
+not error_message and
+$message_headers does not contain "\nList-Id:" and
+$message_headers does not contain "\nList-Help:" and
+$message_headers does not contain "\nList-Subscribe:" and
+$message_headers does not contain "\nList-Unsubscribe:" and
+$message_headers does not contain "\nList-Post:" and
+$message_headers does not contain "\nList-Owner:" and
+$message_headers does not contain "\nList-Archive:" and
+(
+"${if def:h_auto-submitted:{present}{absent}}" is "absent" or
+$header_auto-submitted: is "no"
+) and
+$header_precedence: does not contain "bulk" and
+$header_precedence: does not contain "list" and
+$header_precedence: does not contain "junk" and
+foranyaddress $header_to:
+( $thisaddress contains "$local_part$domain" ) and
+not foranyaddress $header_from:
+(
+$thisaddress contains "$local_part@$domain" or
+$thisaddress contains "server@" or
+$thisaddress contains "daemon@" or
+$thisaddress contains "root@" or
+$thisaddress contains "listserv@" or
+$thisaddress contains "majordomo@" or
+$thisaddress contains "-request@" or
+$thisaddress matches  "^owner-[^@]+@"
+)
+
+The variable $local_part contains the local part of the mail address of the
+user whose filter file is being run - it is normally your login id. The $domain
+variable contains the mail domain. As explained above, if aliases or rewriting
+are defined, or if prefixes or suffixes are in use, the tests for the current
+user are also done with alternative addresses.
+
+
+3.30 Testing delivery status
+----------------------------
+
+There are two conditions that are intended mainly for use in system filter
+files, but which are available in users' filter files as well. The condition 
+first_delivery is true if this is the first process that is attempting to
+deliver the message, and false otherwise. This indicator is not reset until the
+first delivery process successfully terminates; if there is a crash or a power
+failure (for example), the next delivery attempt is also a "first delivery".
+
+In a user filter file first_delivery will be false if there was previously an
+error in the filter, or if a delivery for the user failed owing to, for
+example, a quota error, or if forwarding to a remote address was deferred for
+some reason.
+
+The condition manually_thawed is true if the message was "frozen" for some
+reason, and was subsequently released by the system administrator. It is
+unlikely to be of use in users' filter files.
+
+
+3.31 Multiple personal mailboxes
+--------------------------------
+
+The system administrator can configure Exim so that users can set up variants
+on their email addresses and handle them separately. Consult your system
+administrator or local documentation to see if this facility is enabled on your
+system, and if so, what the details are.
+
+The facility involves the use of a prefix or a suffix on an email address. For
+example, all mail addressed to lg303-<something> would be the property of user 
+lg303, who could determine how it was to be handled, depending on the value of
+<something>.
+
+There are two possible ways in which this can be set up. The first possibility
+is the use of multiple .forward files. In this case, mail to lg303-foo, for
+example, is handled by looking for a file called .forward-foo in lg303's home
+directory. If such a file does not exist, delivery fails and the message is
+returned to its sender.
+
+The alternative approach is to pass all messages through a single .forward
+file, which must be a filter file so that it can distinguish between the
+different cases by referencing the variables $local_part_prefix or
+$local_part_suffix, as in the final example in section 3.33 below.
+
+It is possible to configure Exim to support both schemes at once. In this case,
+a specific .forward-foo file is first sought; if it is not found, the basic
+.forward file is used.
+
+The personal test (see section 3.27) includes prefixes and suffixes in its
+checking.
+
+
+3.32 Ignoring delivery errors
+-----------------------------
+
+As was explained above, filtering just sets up addresses for delivery - no
+deliveries are actually done while a filter file is active. If any of the
+generated addresses subsequently suffers a delivery failure, an error message
+is generated in the normal way. However, if a filter command that sets up a
+delivery is preceded by the word "noerror", errors for that delivery, and any
+deliveries consequent on it (that is, from alias, forwarding, or filter files
+it invokes) are ignored.
+
+
+3.33 Examples of Exim filter commands
+-------------------------------------
+
+Simple forwarding:
+
+# Exim filter
+deliver baggins@rivendell.middle-earth.example
+
+Vacation handling using traditional means, assuming that the .vacation.msg and
+other files have been set up in your home directory:
+
+# Exim filter
+unseen pipe "/usr/ucb/vacation \"$local_part\""
+
+Vacation handling inside Exim, having first created a file called .vacation.msg
+in your home directory:
+
+# Exim filter
+if personal then vacation endif
+
+File some messages by subject:
+
+# Exim filter
+if $header_subject: contains "empire" or
+$header_subject: contains "foundation"
+then
+save $home/mail/f+e
+endif
+
+Save all non-urgent messages by weekday:
+
+# Exim filter
+if $header_subject: does not contain "urgent" and
+$tod_full matches "^(...),"
+then
+save $home/mail/$1
+endif
+
+Throw away all mail from one site, except from postmaster:
+
+# Exim filter
+if $reply_address contains "@spam.site.example" and
+$reply_address does not contain "postmaster@"
+then
+seen finish
+endif
+
+Handle multiple personal mailboxes:
+
+# Exim filter
+if $local_part_suffix is "-foo"
+then
+save $home/mail/foo
+elif $local_part_suffix is "-bar"
+then
+save $home/mail/bar
+endif
+
diff --git a/doc/openssl.txt b/doc/openssl.txt
new file mode 100644
index 0000000..3efa833
--- /dev/null
+++ b/doc/openssl.txt
@@ -0,0 +1,165 @@
+OpenSSL
+=======
+
+The OpenSSL Project documents their supported releases at
+<https://www.openssl.org/policies/releasestrat.html>.  The Exim
+Maintainers are unwilling to try to support Exim built with a
+version of a critical security library which is unmaintained.
+
+Thus as versions of OpenSSL become unsupported by OpenSSL, they become
+unsupported by Exim.  Exim might build with older releases of OpenSSL,
+but that's risky behaviour.
+
+If your operating system vendor continues to ship an older version of
+OpenSSL and is diligently backporting security fixes, and they support
+Exim, then they will be backporting fixes to their packages of Exim too.
+If you wish to stick purely to packages of OpenSSL, then stick to
+packages of Exim too.
+
+If someone maintains "backports", that is worth exploring too.
+
+Note that a number of OSes use Exim with GnuTLS, not OpenSSL.
+
+Otherwise, assuming that your operating system has old OpenSSL, and you
+wish to use current Exim with OpenSSL, then you need to build and
+install your own, without interfering with the system libraries.
+Fortunately, this is easy.
+
+So this only applies if you build Exim yourself.
+
+
+Insecure versions and ciphers
+-----------------------------
+
+Email delivery to MX hosts is usually done with automatic fallback to
+plaintext if TLS could not be negotiated.  There are good historical reasons
+for this.  You can and should avoid it by using DNSSEC for signing your DNS
+and publishing TLSA records, to enable "DANE" security.  This signals to
+senders that they should be able to verify your certificates, and that they
+should not fallback to cleartext.
+
+In the absence of DANE, trying to increase the security of TLS by removing
+support for older generations of ciphers and protocols will actually _lower_
+the security, because the clients fallback to plaintext and retry anyway.  As
+a result, you should give serious thought to enabling older features which are
+no longer default in OpenSSL.
+
+The examples below explicitly enable ssl3 and weak ciphers.
+
+We don't like this, but reality doesn't care and is messy.
+
+
+Build
+-----
+
+Extract the current source of OpenSSL.  Change into that directory.
+
+This assumes that `/opt/openssl` is not in use.  If it is, pick
+something else.  `/opt/exim/openssl` perhaps.
+
+If you pick a location shared amongst various local packages, such as
+`/usr/local` on Linux, then the new OpenSSL will be used by all of those
+packages.  If that's what you want, great!  If instead you want to
+ensure that only software you explicitly set to use the newer OpenSSL
+will try to use the new OpenSSL, then stick to something like
+`/opt/openssl`.
+
+    ./config --prefix=/opt/openssl --openssldir=/etc/ssl  \
+        -L/opt/openssl/lib -Wl,-R/opt/openssl/lib         \
+        enable-ssl-trace shared                           \
+        enable-ssl3 enable-ssl3-method enable-weak-ssl-ciphers
+    make
+    make install
+
+On some systems, the linker uses `-rpath` instead of `-R`; on such systems,
+replace the parameter starting `-Wl` with: `-Wl,-rpath,/opt/openssl/lib`.
+There are more variations on less common systems.
+
+You now have an installed OpenSSL under /opt/openssl which will not be
+used by any system programs.
+
+When you copy `src/EDITME` to `Local/Makefile` to make your build edits,
+choose the pkg-config approach in that file, but also tell Exim to add
+the relevant directory into the rpath stamped into the binary:
+
+    PKG_CONFIG_PATH=/opt/openssl/lib/pkgconfig
+
+    SUPPORT_TLS=yes
+    USE_OPENSSL_PC=openssl
+    LDFLAGS+=-ldl -Wl,-rpath,/opt/openssl/lib
+
+The -ldl is needed by OpenSSL 1.0.2+ on Linux and is not needed on most
+other platforms.  The LDFLAGS is needed because `pkg-config` doesn't know
+how to emit information about RPATH-stamping, but we can still leverage
+`pkg-config` for everything else.
+
+Then build Exim:
+
+    make
+    sudo make install
+
+
+Confirming
+----------
+
+Run:
+
+    exim -d-all+expand --version
+
+and look for the `Library version: OpenSSL:` lines.
+
+To look at the libraries _probably_ found by the linker, use:
+
+    ldd $(which exim)		# most platforms
+    otool -L $(which exim)	# MacOS
+
+although that does not correctly handle restrictions imposed upon
+executables which are setuid.
+
+If the `chrpath` package is installed, then:
+
+    chrpath -l $(which exim)
+
+will show the DT_RPATH stamped into the binary.
+
+Your `binutils` package should come with `readelf`, so an alternative
+is to run:
+
+    readelf -d $(which exim) | grep RPATH
+
+It is important to use `RPATH` and not `RUNPATH`!
+
+The gory details about `RUNPATH` (skip unless interested):
+The OpenSSL library might be opened indirectly by some other library
+which Exim depends upon.  If the executable does have `RUNPATH` then
+that will inhibit using either of `RPATH` or `RUNPATH` from the
+executable for finding the OpenSSL library when that other library tries
+to load it.
+In fact, if the intermediate library has a `RUNPATH` stamped into it,
+then this will block `RPATH` too, and will create problems with Exim.
+If you're in such a situation, and those libraries were supplied to you
+instead of built by you, then you're reaching the limits of sane
+repairability and it's time to prioritize rebuilding your mail-server
+hosts to be a current OS release which natively pulls in an
+upstream-supported OpenSSL, or stick to the OS releases of Exim.
+
+
+Very Advanced
+-------------
+
+You can not use $ORIGIN for portably packing OpenSSL in with Exim with
+normal Exim builds, because Exim is installed setuid which causes the
+runtime linker to ignore $ORIGIN in DT_RPATH.
+
+_If_ following the steps for a non-setuid Exim, _then_ you can use:
+
+    EXTRALIBS_EXIM=-ldl '-Wl,-rpath,$$ORIGIN/../lib'
+
+The doubled `$$` is needed for the make(1) layer and the quotes needed
+for the shell invoked by make(1) for calling the linker.
+
+Note that this is sufficiently far outside normal that the build-system
+doesn't support it by default; you'll want to drop a symlink to the lib
+directory into the Exim release top-level directory, so that lib exists
+as a sibling to the build-$platform directory.
+
diff --git a/doc/spec.txt b/doc/spec.txt
new file mode 100644
index 0000000..ddadcaf
--- /dev/null
+++ b/doc/spec.txt
@@ -0,0 +1,39528 @@
+Specification of the Exim Mail Transfer Agent
+
+Exim Maintainers
+
+Copyright (c) 2022 The Exim Maintainers
+
+Revision 4.96  25 Jun 2022 EM
+
+-------------------------------------------------------------------------------
+
+TABLE OF CONTENTS
+
+1. Introduction
+    1.1. Exim documentation
+    1.2. FTP site and websites
+    1.3. Mailing lists
+    1.4. Bug reports
+    1.5. Where to find the Exim distribution
+    1.6. Limitations
+    1.7. Runtime configuration
+    1.8. Calling interface
+    1.9. Terminology
+2. Incorporated code
+3. How Exim receives and delivers mail
+    3.1. Overall philosophy
+    3.2. Policy control
+    3.3. User filters
+    3.4. Message identification
+    3.5. Receiving mail
+    3.6. Handling an incoming message
+    3.7. Life of a message
+    3.8. Processing an address for delivery
+    3.9. Processing an address for verification
+    3.10. Running an individual router
+    3.11. Duplicate addresses
+    3.12. Router preconditions
+    3.13. Delivery in detail
+    3.14. Retry mechanism
+    3.15. Temporary delivery failure
+    3.16. Permanent delivery failure
+    3.17. Failures to deliver bounce messages
+4. Building and installing Exim
+    4.1. Unpacking
+    4.2. Multiple machine architectures and operating systems
+    4.3. PCRE2 library
+    4.4. DBM libraries
+    4.5. Pre-building configuration
+    4.6. Support for iconv()
+    4.7. Including TLS/SSL encryption support
+    4.8. Use of tcpwrappers
+    4.9. Including support for IPv6
+    4.10. Dynamically loaded lookup module support
+    4.11. The building process
+    4.12. Output from "make"
+    4.13. Overriding build-time options for Exim
+    4.14. OS-specific header files
+    4.15. Overriding build-time options for the monitor
+    4.16. Installing Exim binaries and scripts
+    4.17. Installing info documentation
+    4.18. Setting up the spool directory
+    4.19. Testing
+    4.20. Replacing another MTA with Exim
+    4.21. Running the daemon
+    4.22. Upgrading Exim
+    4.23. Stopping the Exim daemon on Solaris
+5. The Exim command line
+    5.1. Setting options by program name
+    5.2. Trusted and admin users
+    5.3. Command line options
+6. The Exim runtime configuration file
+    6.1. Using a different configuration file
+    6.2. Configuration file format
+    6.3. File inclusions in the configuration file
+    6.4. Macros in the configuration file
+    6.5. Macro substitution
+    6.6. Redefining macros
+    6.7. Overriding macro values
+    6.8. Example of macro usage
+    6.9. Builtin macros
+    6.10. Conditional skips in the configuration file
+    6.11. Common option syntax
+    6.12. Boolean options
+    6.13. Integer values
+    6.14. Octal integer values
+    6.15. Fixed point numbers
+    6.16. Time intervals
+    6.17. String values
+    6.18. Expanded strings
+    6.19. User and group names
+    6.20. List construction
+    6.21. Changing list separators
+    6.22. Empty items in lists
+    6.23. Format of driver configurations
+7. The default configuration file
+    7.1. Macros
+    7.2. Main configuration settings
+    7.3. ACL configuration
+    7.4. Router configuration
+    7.5. Transport configuration
+    7.6. Default retry rule
+    7.7. Rewriting configuration
+    7.8. Authenticators configuration
+8. Regular expressions
+9. File and database lookups
+    9.1. Examples of different lookup syntax
+    9.2. Lookup types
+    9.3. Single-key lookup types
+    9.4. Query-style lookup types
+    9.5. Temporary errors in lookups
+    9.6. Default values in single-key lookups
+    9.7. Partial matching in single-key lookups
+    9.8. Lookup caching
+    9.9. Quoting lookup data
+    9.10. More about dnsdb
+    9.11. Dnsdb lookup modifiers
+    9.12. Pseudo dnsdb record types
+    9.13. Multiple dnsdb lookups
+    9.14. More about LDAP
+    9.15. Format of LDAP queries
+    9.16. LDAP quoting
+    9.17. LDAP connections
+    9.18. LDAP authentication and control information
+    9.19. Format of data returned by LDAP
+    9.20. More about NIS+
+    9.21. SQL lookups
+    9.22. More about MySQL, PostgreSQL, Oracle, InterBase, and Redis
+    9.23. Specifying the server in the query
+    9.24. Special MySQL features
+    9.25. Special PostgreSQL features
+    9.26. More about SQLite
+    9.27. More about Redis
+10. Domain, host, address, and local part lists
+    10.1. Expansion of lists
+    10.2. Negated items in lists
+    10.3. File names in lists
+    10.4. An lsearch file is not an out-of-line list
+    10.5. Results of list checking
+    10.6. Named lists
+    10.7. Named lists compared with macros
+    10.8. Named list caching
+    10.9. Domain lists
+    10.10. Host lists
+    10.11. Special host list patterns
+    10.12. Host list patterns that match by IP address
+    10.13. Host list patterns for single-key lookups by host address
+    10.14. Host list patterns that match by host name
+    10.15. Behaviour when an IP address or name cannot be found
+    10.16. Mixing wildcarded host names and addresses in host lists
+    10.17. Temporary DNS errors when looking up host information
+    10.18. Host list patterns for single-key lookups by host name
+    10.19. Host list patterns for query-style lookups
+    10.20. Address lists
+    10.21. Case of letters in address lists
+    10.22. Local part lists
+11. String expansions
+    11.1. Literal text in expanded strings
+    11.2. Character escape sequences in expanded strings
+    11.3. Testing string expansions
+    11.4. Forced expansion failure
+    11.5. Expansion items
+    11.6. Expansion operators
+    11.7. Expansion conditions
+    11.8. Combining expansion conditions
+    11.9. Expansion variables
+12. Embedded Perl
+    12.1. Setting up so Perl can be used
+    12.2. Calling Perl subroutines
+    12.3. Calling Exim functions from Perl
+    12.4. Use of standard output and error by Perl
+13. Starting the daemon and the use of network interfaces
+    13.1. Starting a listening daemon
+    13.2. Special IP listening addresses
+    13.3. Overriding local_interfaces and daemon_smtp_ports
+    13.4. Support for the submissions (aka SSMTP or SMTPS) protocol
+    13.5. IPv6 address scopes
+    13.6. Disabling IPv6
+    13.7. Examples of starting a listening daemon
+    13.8. Recognizing the local host
+    13.9. Delivering to a remote host
+14. Main configuration
+    14.1. Miscellaneous
+    14.2. Exim parameters
+    14.3. Privilege controls
+    14.4. Logging
+    14.5. Frozen messages
+    14.6. Data lookups
+    14.7. Message ids
+    14.8. Embedded Perl Startup
+    14.9. Daemon
+    14.10. Resource control
+    14.11. Policy controls
+    14.12. Callout cache
+    14.13. TLS
+    14.14. Local user handling
+    14.15. All incoming messages (SMTP and non-SMTP)
+    14.16. Non-SMTP incoming messages
+    14.17. Incoming SMTP messages
+    14.18. SMTP extensions
+    14.19. Processing messages
+    14.20. System filter
+    14.21. Routing and delivery
+    14.22. Bounce and warning messages
+    14.23. Alphabetical list of main options
+15. Generic options for routers
+16. The accept router
+17. The dnslookup router
+    17.1. Problems with DNS lookups
+    17.2. Declining addresses by dnslookup
+    17.3. Private options for dnslookup
+    17.4. Effect of qualify_single and search_parents
+18. The ipliteral router
+19. The iplookup router
+20. The manualroute router
+    20.1. Private options for manualroute
+    20.2. Routing rules in route_list
+    20.3. Routing rules in route_data
+    20.4. Format of the list of hosts
+    20.5. Format of one host item
+    20.6. How the list of hosts is used
+    20.7. How the options are used
+    20.8. Manualroute examples
+21. The queryprogram router
+22. The redirect router
+    22.1. Redirection data
+    22.2. Forward files and address verification
+    22.3. Interpreting redirection data
+    22.4. Items in a non-filter redirection list
+    22.5. Redirecting to a local mailbox
+    22.6. Special items in redirection lists
+    22.7. Duplicate addresses
+    22.8. Repeated redirection expansion
+    22.9. Errors in redirection lists
+    22.10. Private options for the redirect router
+23. Environment for running local transports
+    23.1. Concurrent deliveries
+    23.2. Uids and gids
+    23.3. Current and home directories
+    23.4. Expansion variables derived from the address
+24. Generic options for transports
+25. Address batching in local transports
+26. The appendfile transport
+    26.1. The file and directory options
+    26.2. Private options for appendfile
+    26.3. Operational details for appending
+    26.4. Operational details for delivery to a new file
+    26.5. Maildir delivery
+    26.6. Using tags to record message sizes
+    26.7. Using a maildirsize file
+    26.8. Mailstore delivery
+    26.9. Non-special new file delivery
+27. The autoreply transport
+    27.1. Private options for autoreply
+28. The lmtp transport
+29. The pipe transport
+    29.1. Concurrent delivery
+    29.2. Returned status and data
+    29.3. How the command is run
+    29.4. Environment variables
+    29.5. Private options for pipe
+    29.6. Using an external local delivery agent
+30. The smtp transport
+    30.1. Multiple messages on a single connection
+    30.2. Use of the $host and $host_address variables
+    30.3. Use of $tls_cipher and $tls_peerdn
+    30.4. Private options for smtp
+    30.5. How the limits for the number of hosts to try are used
+31. Address rewriting
+    31.1. Explicitly configured address rewriting
+    31.2. When does rewriting happen?
+    31.3. Testing the rewriting rules that apply on input
+    31.4. Rewriting rules
+    31.5. Rewriting patterns
+    31.6. Rewriting replacements
+    31.7. Rewriting flags
+    31.8. Flags specifying which headers and envelope addresses to rewrite
+    31.9. The SMTP-time rewriting flag
+    31.10. Flags controlling the rewriting process
+    31.11. Rewriting examples
+32. Retry configuration
+    32.1. Changing retry rules
+    32.2. Format of retry rules
+    32.3. Choosing which retry rule to use for address errors
+    32.4. Choosing which retry rule to use for host and message errors
+    32.5. Retry rules for specific errors
+    32.6. Retry rules for specified senders
+    32.7. Retry parameters
+    32.8. Retry rule examples
+    32.9. Timeout of retry data
+    32.10. Long-term failures
+    32.11. Deliveries that work intermittently
+33. SMTP authentication
+    33.1. Generic options for authenticators
+    33.2. The AUTH parameter on MAIL commands
+    33.3. Authentication on an Exim server
+    33.4. Testing server authentication
+    33.5. Authentication by an Exim client
+34. The plaintext authenticator
+    34.1. Avoiding cleartext use
+    34.2. Plaintext server options
+    34.3. Using plaintext in a server
+    34.4. The PLAIN authentication mechanism
+    34.5. The LOGIN authentication mechanism
+    34.6. Support for different kinds of authentication
+    34.7. Using plaintext in a client
+35. The cram_md5 authenticator
+    35.1. Using cram_md5 as a server
+    35.2. Using cram_md5 as a client
+36. The cyrus_sasl authenticator
+    36.1. Using cyrus_sasl as a server
+37. The dovecot authenticator
+38. The gsasl authenticator
+    38.1. gsasl auth variables
+39. The heimdal_gssapi authenticator
+    39.1. heimdal_gssapi auth variables
+40. The spa authenticator
+    40.1. Using spa as a server
+    40.2. Using spa as a client
+41. The external authenticator
+    41.1. External options
+    41.2. Using external in a server
+    41.3. Using external in a client
+42. The tls authenticator
+43. Encrypted SMTP connections using TLS/SSL
+    43.1. Support for the "submissions" (aka "ssmtp" and "smtps") protocol
+    43.2. OpenSSL vs GnuTLS
+    43.3. GnuTLS parameter computation
+    43.4. Requiring specific ciphers in OpenSSL
+    43.5. Requiring specific ciphers or other parameters in GnuTLS
+    43.6. Configuring an Exim server to use TLS
+    43.7. Requesting and verifying client certificates
+    43.8. Revoked certificates
+    43.9. Caching of static server configuration items
+    43.10. Configuring an Exim client to use TLS
+    43.11. Caching of static client configuration items
+    43.12. Use of TLS Server Name Indication
+    43.13. Multiple messages on the same encrypted TCP/IP connection
+    43.14. Certificates and all that
+    43.15. Certificate chains
+    43.16. Self-signed certificates
+    43.17. TLS Resumption
+    43.18. DANE
+44. Access control lists
+    44.1. Testing ACLs
+    44.2. Specifying when ACLs are used
+    44.3. The non-SMTP ACLs
+    44.4. The SMTP connect ACL
+    44.5. The EHLO/HELO ACL
+    44.6. The DATA ACLs
+    44.7. The SMTP DKIM ACL
+    44.8. The SMTP MIME ACL
+    44.9. The SMTP PRDR ACL
+    44.10. The QUIT ACL
+    44.11. The not-QUIT ACL
+    44.12. Finding an ACL to use
+    44.13. ACL return codes
+    44.14. Unset ACL options
+    44.15. Data for message ACLs
+    44.16. Data for non-message ACLs
+    44.17. Format of an ACL
+    44.18. ACL verbs
+    44.19. ACL variables
+    44.20. Condition and modifier processing
+    44.21. ACL modifiers
+    44.22. Use of the control modifier
+    44.23. Summary of message fixup control
+    44.24. Adding header lines in ACLs
+    44.25. Removing header lines in ACLs
+    44.26. ACL conditions
+    44.27. Using DNS lists
+    44.28. Specifying the IP address for a DNS list lookup
+    44.29. DNS lists keyed on domain names
+    44.30. Multiple explicit keys for a DNS list
+    44.31. Data returned by DNS lists
+    44.32. Variables set from DNS lists
+    44.33. Additional matching conditions for DNS lists
+    44.34. Negated DNS matching conditions
+    44.35. Handling multiple DNS records from a DNS list
+    44.36. Detailed information from merged DNS lists
+    44.37. DNS lists and IPv6
+    44.38. Previously seen user and hosts
+    44.39. Rate limiting incoming messages
+    44.40. Ratelimit options for what is being measured
+    44.41. Ratelimit update modes
+    44.42. Ratelimit options for handling fast clients
+    44.43. Limiting the rate of different events
+    44.44. Using rate limiting
+    44.45. Address verification
+    44.46. Callout verification
+    44.47. Additional parameters for callouts
+    44.48. Callout caching
+    44.49. Quota caching
+    44.50. Sender address verification reporting
+    44.51. Redirection while verifying
+    44.52. Client SMTP authorization (CSA)
+    44.53. Bounce address tag validation
+    44.54. Using an ACL to control relaying
+    44.55. Checking a relay configuration
+45. Content scanning at ACL time
+    45.1. Scanning for viruses
+    45.2. Scanning with SpamAssassin and Rspamd
+    45.3. Calling SpamAssassin from an Exim ACL
+    45.4. Scanning MIME parts
+    45.5. Scanning with regular expressions
+46. Adding a local scan function to Exim
+    46.1. Building Exim to use a local scan function
+    46.2. API for local_scan()
+    46.3. Configuration options for local_scan()
+    46.4. Available Exim variables
+    46.5. Structure of header lines
+    46.6. Structure of recipient items
+    46.7. Available Exim functions
+    46.8. More about Exim's memory handling
+47. System-wide message filtering
+    47.1. Specifying a system filter
+    47.2. Testing a system filter
+    47.3. Contents of a system filter
+    47.4. Additional variable for system filters
+    47.5. Defer, freeze, and fail commands for system filters
+    47.6. Adding and removing headers in a system filter
+    47.7. Setting an errors address in a system filter
+    47.8. Per-address filtering
+48. Message processing
+    48.1. Submission mode for non-local messages
+    48.2. Line endings
+    48.3. Unqualified addresses
+    48.4. The UUCP From line
+    48.5. Resent- header lines
+    48.6. The Auto-Submitted: header line
+    48.7. The Bcc: header line
+    48.8. The Date: header line
+    48.9. The Delivery-date: header line
+    48.10. The Envelope-to: header line
+    48.11. The From: header line
+    48.12. The Message-ID: header line
+    48.13. The Received: header line
+    48.14. The References: header line
+    48.15. The Return-path: header line
+    48.16. The Sender: header line
+    48.17. Adding and removing header lines in routers and transports
+    48.18. Constructed addresses
+    48.19. Case of local parts
+    48.20. Dots in local parts
+    48.21. Rewriting addresses
+49. SMTP processing
+    49.1. Outgoing SMTP and LMTP over TCP/IP
+    49.2. Errors in outgoing SMTP
+    49.3. Incoming SMTP messages over TCP/IP
+    49.4. Unrecognized SMTP commands
+    49.5. Syntax and protocol errors in SMTP commands
+    49.6. Use of non-mail SMTP commands
+    49.7. The VRFY and EXPN commands
+    49.8. The ETRN command
+    49.9. Incoming local SMTP
+    49.10. Outgoing batched SMTP
+    49.11. Incoming batched SMTP
+50. Customizing bounce and warning messages
+    50.1. Customizing bounce messages
+    50.2. Customizing warning messages
+51. Some common configuration settings
+    51.1. Sending mail to a smart host
+    51.2. Using Exim to handle mailing lists
+    51.3. Syntax errors in mailing lists
+    51.4. Re-expansion of mailing lists
+    51.5. Closed mailing lists
+    51.6. Variable Envelope Return Paths (VERP)
+    51.7. Virtual domains
+    51.8. Multiple user mailboxes
+    51.9. Simplified vacation processing
+    51.10. Taking copies of mail
+    51.11. Intermittently connected hosts
+    51.12. Exim on the upstream server host
+    51.13. Exim on the intermittently connected client host
+52. Using Exim as a non-queueing client
+53. Log files
+    53.1. Where the logs are written
+    53.2. Logging to local files that are periodically "cycled"
+    53.3. Datestamped log files
+    53.4. Logging to syslog
+    53.5. Log line flags
+    53.6. Logging message reception
+    53.7. Logging deliveries
+    53.8. Discarded deliveries
+    53.9. Deferred deliveries
+    53.10. Delivery failures
+    53.11. Fake deliveries
+    53.12. Completion
+    53.13. Summary of Fields in Log Lines
+    53.14. Other log entries
+    53.15. Reducing or increasing what is logged
+    53.16. Message log
+54. Exim utilities
+    54.1. Finding out what Exim processes are doing (exiwhat)
+    54.2. Selective queue listing (exiqgrep)
+    54.3. Summarizing the queue (exiqsumm)
+    54.4. Extracting specific information from the log (exigrep)
+    54.5. Selecting messages by various criteria (exipick)
+    54.6. Cycling log files (exicyclog)
+    54.7. Mail statistics (eximstats)
+    54.8. Checking access policy (exim_checkaccess)
+    54.9. Making DBM files (exim_dbmbuild)
+    54.10. Finding individual retry times (exinext)
+    54.11. Hints database maintenance
+    54.12. exim_dumpdb
+    54.13. exim_tidydb
+    54.14. exim_fixdb
+    54.15. Mailbox maintenance (exim_lock)
+55. The Exim monitor
+    55.1. Running the monitor
+    55.2. The stripcharts
+    55.3. Main action buttons
+    55.4. The log display
+    55.5. The queue display
+    55.6. The queue menu
+56. Security considerations
+    56.1. Building a more "hardened" Exim
+    56.2. Root privilege
+    56.3. Running Exim without privilege
+    56.4. Delivering to local files
+    56.5. Running local commands
+    56.6. Trust in configuration data
+    56.7. IPv4 source routing
+    56.8. The VRFY, EXPN, and ETRN commands in SMTP
+    56.9. Privileged users
+    56.10. Spool files
+    56.11. Use of argv[0]
+    56.12. Use of %f formatting
+    56.13. Embedded Exim path
+    56.14. Dynamic module directory
+    56.15. Use of sprintf()
+    56.16. Use of debug_printf() and log_write()
+    56.17. Use of strcat() and strcpy()
+57. Format of spool files
+    57.1. Format of the -H file
+    57.2. Format of the -D file
+58. DKIM, SPF, SRS and DMARC
+    58.1. DKIM (DomainKeys Identified Mail)
+    58.2. Signing outgoing messages
+    58.3. Verifying DKIM signatures in incoming mail
+    58.4. SPF (Sender Policy Framework)
+    58.5. SRS (Sender Rewriting Scheme)
+    58.6. DMARC
+59. Proxies
+    59.1. Inbound proxies
+    59.2. Outbound proxies
+    59.3. Logging
+60. Internationalisation
+    60.1. MTA operations
+    60.2. MDA operations
+61. Events
+62. Adding new drivers or lookup types
+
+
+
+===============================================================================
+1. INTRODUCTION
+
+Exim is a mail transfer agent (MTA) for hosts that are running Unix or
+Unix-like operating systems. It was designed on the assumption that it would be
+run on hosts that are permanently connected to the Internet. However, it can be
+used on intermittently connected hosts with suitable configuration adjustments.
+
+Configuration files currently exist for the following operating systems: AIX,
+BSD/OS (aka BSDI), Darwin (Mac OS X), DGUX, Dragonfly, FreeBSD, GNU/Hurd, GNU/
+Linux, HI-OSF (Hitachi), HI-UX, HP-UX, IRIX, MIPS RISCOS, NetBSD, OpenBSD,
+OpenUNIX, QNX, SCO, SCO SVR4.2 (aka UNIX-SV), Solaris (aka SunOS5), SunOS4,
+Tru64-Unix (formerly Digital UNIX, formerly DEC-OSF1), Ultrix, and UnixWare.
+Some of these operating systems are no longer current and cannot easily be
+tested, so the configuration files may no longer work in practice.
+
+There are also configuration files for compiling Exim in the Cygwin environment
+that can be installed on systems running Windows. However, this document does
+not contain any information about running Exim in the Cygwin environment.
+
+The terms and conditions for the use and distribution of Exim are contained in
+the file NOTICE. Exim is distributed under the terms of the GNU General Public
+Licence, a copy of which may be found in the file LICENCE.
+
+The use, supply, or promotion of Exim for the purpose of sending bulk,
+unsolicited electronic mail is incompatible with the basic aims of Exim, which
+revolve around the free provision of a service that enhances the quality of
+personal communications. The author of Exim regards indiscriminate mass-mailing
+as an antisocial, irresponsible abuse of the Internet.
+
+Exim owes a great deal to Smail 3 and its author, Ron Karr. Without the
+experience of running and working on the Smail 3 code, I could never have
+contemplated starting to write a new MTA. Many of the ideas and user interfaces
+were originally taken from Smail 3, though the actual code of Exim is entirely
+new, and has developed far beyond the initial concept.
+
+Many people, both in Cambridge and around the world, have contributed to the
+development and the testing of Exim, and to porting it to various operating
+systems. I am grateful to them all. The distribution now contains a file called
+ACKNOWLEDGMENTS, in which I have started recording the names of contributors.
+
+
+1.1 Exim documentation
+----------------------
+
+This edition of the Exim specification applies to version 4.96 of Exim.
+Substantive changes from the 4.95 edition are marked in some renditions of this
+document; this paragraph is so marked if the rendition is capable of showing a
+change indicator.
+
+This document is very much a reference manual; it is not a tutorial. The reader
+is expected to have some familiarity with the SMTP mail transfer protocol and
+with general Unix system administration. Although there are some discussions
+and examples in places, the information is mostly organized in a way that makes
+it easy to look up, rather than in a natural order for sequential reading.
+Furthermore, this manual aims to cover every aspect of Exim in detail,
+including a number of rarely-used, special-purpose features that are unlikely
+to be of very wide interest.
+
+An "easier" discussion of Exim which provides more in-depth explanatory,
+introductory, and tutorial material can be found in a book entitled The Exim
+SMTP Mail Server (second edition, 2007), published by UIT Cambridge (https://
+www.uit.co.uk/exim-book/).
+
+The book also contains a chapter that gives a general introduction to SMTP and
+Internet mail. Inevitably, however, the book is unlikely to be fully up-to-date
+with the latest release of Exim. (Note that the earlier book about Exim,
+published by O'Reilly, covers Exim 3, and many things have changed in Exim 4.)
+
+If you are using a Debian distribution of Exim, you will find information about
+Debian-specific features in the file /usr/share/doc/exim4-base/README.Debian.
+The command man update-exim.conf is another source of Debian-specific
+information.
+
+As Exim develops, there may be features in newer versions that have not yet
+made it into this document, which is updated only when the most significant
+digit of the fractional part of the version number changes. Specifications of
+new features that are not yet in this manual are placed in the file doc/
+NewStuff in the Exim distribution.
+
+Some features may be classified as "experimental". These may change
+incompatibly while they are developing, or even be withdrawn. For this reason,
+they are not documented in this manual. Information about experimental features
+can be found in the file doc/experimental.txt.
+
+All changes to Exim (whether new features, bug fixes, or other kinds of change)
+are noted briefly in the file called doc/ChangeLog.
+
+This specification itself is available as an ASCII file in doc/spec.txt so that
+it can easily be searched with a text editor. Other files in the doc directory
+are:
+
+OptionLists.txt  list of all options in alphabetical order
+dbm.discuss.txt  discussion about DBM libraries
+exim.8           a man page of Exim's command line options
+experimental.txt documentation of experimental features
+filter.txt       specification of the filter language
+Exim3.upgrade    upgrade notes from release 2 to release 3
+Exim4.upgrade    upgrade notes from release 3 to release 4
+openssl.txt      installing a current OpenSSL release
+
+The main specification and the specification of the filtering language are also
+available in other formats (HTML, PostScript, PDF, and Texinfo). Section 1.5
+below tells you how to get hold of these.
+
+
+1.2 FTP site and websites
+-------------------------
+
+The primary site for Exim source distributions is the exim.org FTP site,
+available over HTTPS, HTTP and FTP. These services, and the exim.org website,
+are hosted at the University of Cambridge.
+
+As well as Exim distribution tar files, the Exim website contains a number of
+differently formatted versions of the documentation. A recent addition to the
+online information is the Exim wiki (https://wiki.exim.org), which contains
+what used to be a separate FAQ, as well as various other examples, tips, and
+know-how that have been contributed by Exim users. The wiki site should always
+redirect to the correct place, which is currently provided by GitHub, and is
+open to editing by anyone with a GitHub account.
+
+An Exim Bugzilla exists at https://bugs.exim.org. You can use this to report
+bugs, and also to add items to the wish list. Please search first to check that
+you are not duplicating a previous entry. Please do not ask for configuration
+help in the bug-tracker.
+
+
+1.3 Mailing lists
+-----------------
+
+The following Exim mailing lists exist:
+
+exim-announce@exim.org Moderated, low volume announcements list
+exim-users@exim.org    General discussion list
+exim-dev@exim.org      Discussion of bugs, enhancements, etc.
+exim-cvs@exim.org      Automated commit messages from the VCS
+
+You can subscribe to these lists, change your existing subscriptions, and view
+or search the archives via the mailing lists link on the Exim home page. If you
+are using a Debian distribution of Exim, you may wish to subscribe to the
+Debian-specific mailing list pkg-exim4-users@lists.alioth.debian.org via this
+web page:
+
+https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/pkg-exim4-users
+
+Please ask Debian-specific questions on that list and not on the general Exim
+lists.
+
+
+1.4 Bug reports
+---------------
+
+Reports of obvious bugs can be emailed to bugs@exim.org or reported via the
+Bugzilla (https://bugs.exim.org). However, if you are unsure whether some
+behaviour is a bug or not, the best thing to do is to post a message to the 
+exim-dev mailing list and have it discussed.
+
+
+1.5 Where to find the Exim distribution
+---------------------------------------
+
+The master distribution site for the Exim distribution is
+
+https://downloads.exim.org/
+
+The service is available over HTTPS, HTTP and FTP. We encourage people to
+migrate to HTTPS.
+
+The content served at https://downloads.exim.org/ is identical to the content
+served at https://ftp.exim.org/pub/exim and ftp://ftp.exim.org/pub/exim.
+
+If accessing via a hostname containing ftp, then the file references that
+follow are relative to the exim directories at these sites. If accessing via
+the hostname downloads then the subdirectories described here are top-level
+directories.
+
+There are now quite a number of independent mirror sites around the world.
+Those that I know about are listed in the file called Mirrors.
+
+Within the top exim directory there are subdirectories called exim3 (for
+previous Exim 3 distributions), exim4 (for the latest Exim 4 distributions),
+and Testing for testing versions. In the exim4 subdirectory, the current
+release can always be found in files called
+
+exim-n.nn.tar.xz
+exim-n.nn.tar.gz
+exim-n.nn.tar.bz2
+
+where n.nn is the highest such version number in the directory. The three files
+contain identical data; the only difference is the type of compression. The .xz
+file is usually the smallest, while the .gz file is the most portable to old
+systems.
+
+The distributions will be PGP signed by an individual key of the Release
+Coordinator. This key will have a uid containing an email address in the 
+exim.org domain and will have signatures from other people, including other
+Exim maintainers. We expect that the key will be in the "strong set" of PGP
+keys. There should be a trust path to that key from the Exim Maintainer's PGP
+keys, a version of which can be found in the release directory in the file
+Exim-Maintainers-Keyring.asc. All keys used will be available in public
+keyserver pools, such as pool.sks-keyservers.net.
+
+At the time of the last update, releases were being made by Jeremy Harris and
+signed with key 0xBCE58C8CE41F32DF. Other recent keys used for signing are
+those of Heiko Schlittermann, 0x26101B62F69376CE, and of Phil Pennock, 
+0x4D1E900E14C1CC04.
+
+The signatures for the tar bundles are in:
+
+exim-n.nn.tar.xz.asc
+exim-n.nn.tar.gz.asc
+exim-n.nn.tar.bz2.asc
+
+For each released version, the log of changes is made available in a separate
+file in the directory ChangeLogs so that it is possible to find out what has
+changed without having to download the entire distribution.
+
+The main distribution contains ASCII versions of this specification and other
+documentation; other formats of the documents are available in separate files
+inside the exim4 directory of the FTP site:
+
+exim-html-n.nn.tar.gz
+exim-pdf-n.nn.tar.gz
+exim-postscript-n.nn.tar.gz
+exim-texinfo-n.nn.tar.gz
+
+These tar files contain only the doc directory, not the complete distribution,
+and are also available in .bz2 and .xz forms.
+
+
+1.6 Limitations
+---------------
+
+  * Exim is designed for use as an Internet MTA, and therefore handles
+    addresses in RFC 2822 domain format only. It cannot handle UUCP "bang
+    paths", though simple two-component bang paths can be converted by a
+    straightforward rewriting configuration. This restriction does not prevent
+    Exim from being interfaced to UUCP as a transport mechanism, provided that
+    domain addresses are used.
+
+  * Exim insists that every address it handles has a domain attached. For
+    incoming local messages, domainless addresses are automatically qualified
+    with a configured domain value. Configuration options specify from which
+    remote systems unqualified addresses are acceptable. These are then
+    qualified on arrival.
+
+  * The only external transport mechanisms that are currently implemented are
+    SMTP and LMTP over a TCP/IP network (including support for IPv6). However,
+    a pipe transport is available, and there are facilities for writing
+    messages to files and pipes, optionally in batched SMTP format; these
+    facilities can be used to send messages to other transport mechanisms such
+    as UUCP, provided they can handle domain-style addresses. Batched SMTP
+    input is also catered for.
+
+  * Exim is not designed for storing mail for dial-in hosts. When the volumes
+    of such mail are large, it is better to get the messages "delivered" into
+    files (that is, off Exim's queue) and subsequently passed on to the dial-in
+    hosts by other means.
+
+  * Although Exim does have basic facilities for scanning incoming messages,
+    these are not comprehensive enough to do full virus or spam scanning. Such
+    operations are best carried out using additional specialized software
+    packages. If you compile Exim with the content-scanning extension,
+    straightforward interfaces to a number of common scanners are provided.
+
+
+1.7 Runtime configuration
+-------------------------
+
+Exim's runtime configuration is held in a single text file that is divided into
+a number of sections. The entries in this file consist of keywords and values,
+in the style of Smail 3 configuration files. A default configuration file which
+is suitable for simple online installations is provided in the distribution,
+and is described in chapter 7 below.
+
+
+1.8 Calling interface
+---------------------
+
+Like many MTAs, Exim has adopted the Sendmail command line interface so that it
+can be a straight replacement for /usr/lib/sendmail or /usr/sbin/sendmail when
+sending mail, but you do not need to know anything about Sendmail in order to
+run Exim. For actions other than sending messages, Sendmail-compatible options
+also exist, but those that produce output (for example, -bp, which lists the
+messages in the queue) do so in Exim's own format. There are also some
+additional options that are compatible with Smail 3, and some further options
+that are new to Exim. Chapter 5 documents all Exim's command line options. This
+information is automatically made into the man page that forms part of the Exim
+distribution.
+
+Control of messages in the queue can be done via certain privileged command
+line options. There is also an optional monitor program called eximon, which
+displays current information in an X window, and which contains a menu
+interface to Exim's command line administration options.
+
+
+1.9 Terminology
+---------------
+
+The body of a message is the actual data that the sender wants to transmit. It
+is the last part of a message and is separated from the header (see below) by a
+blank line.
+
+When a message cannot be delivered, it is normally returned to the sender in a
+delivery failure message or a "non-delivery report" (NDR). The term bounce is
+commonly used for this action, and the error reports are often called bounce
+messages. This is a convenient shorthand for "delivery failure error report".
+Such messages have an empty sender address in the message's envelope (see
+below) to ensure that they cannot themselves give rise to further bounce
+messages.
+
+The term default appears frequently in this manual. It is used to qualify a
+value which is used in the absence of any setting in the configuration. It may
+also qualify an action which is taken unless a configuration setting specifies
+otherwise.
+
+The term defer is used when the delivery of a message to a specific destination
+cannot immediately take place for some reason (a remote host may be down, or a
+user's local mailbox may be full). Such deliveries are deferred until a later
+time.
+
+The word domain is sometimes used to mean all but the first component of a
+host's name. It is not used in that sense here, where it normally refers to the
+part of an email address following the @ sign.
+
+A message in transit has an associated envelope, as well as a header and a
+body. The envelope contains a sender address (to which bounce messages should
+be delivered), and any number of recipient addresses. References to the sender
+or the recipients of a message usually mean the addresses in the envelope. An
+MTA uses these addresses for delivery, and for returning bounce messages, not
+the addresses that appear in the header lines.
+
+The header of a message is the first part of a message's text, consisting of a
+number of lines, each of which has a name such as From:, To:, Subject:, etc.
+Long header lines can be split over several text lines by indenting the
+continuations. The header is separated from the body by a blank line.
+
+The term local part, which is taken from RFC 2822, is used to refer to the part
+of an email address that precedes the @ sign. The part that follows the @ sign
+is called the domain or mail domain.
+
+The terms local delivery and remote delivery are used to distinguish delivery
+to a file or a pipe on the local host from delivery by SMTP over TCP/IP to
+another host. As far as Exim is concerned, all hosts other than the host it is
+running on are remote.
+
+Return path is another name that is used for the sender address in a message's
+envelope.
+
+The term queue is used to refer to the set of messages awaiting delivery
+because this term is in widespread use in the context of MTAs. However, in
+Exim's case, the reality is more like a pool than a queue, because there is
+normally no ordering of waiting messages.
+
+The term queue runner is used to describe a process that scans the queue and
+attempts to deliver those messages whose retry times have come. This term is
+used by other MTAs and also relates to the command runq, but in Exim the
+waiting messages are normally processed in an unpredictable order.
+
+The term spool directory is used for a directory in which Exim keeps the
+messages in its queue - that is, those that it is in the process of delivering.
+This should not be confused with the directory in which local mailboxes are
+stored, which is called a "spool directory" by some people. In the Exim
+documentation, "spool" is always used in the first sense.
+
+
+
+===============================================================================
+2. INCORPORATED CODE
+
+A number of pieces of external code are included in the Exim distribution.
+
+  * Regular expressions are supported in the main Exim program and in the Exim
+    monitor using the freely-distributable PCRE2 library, copyright (c)
+    University of Cambridge. The source to PCRE2 is not longer shipped with
+    Exim, so you will need to use the version of PCRE2 shipped with your
+    system, or obtain and install the full version of the library from https://
+    github.com/PhilipHazel/pcre2/releases.
+
+  * Support for the cdb (Constant DataBase) lookup method is provided by code
+    contributed by Nigel Metheringham of (at the time he contributed it) Planet
+    Online Ltd. The implementation is completely contained within the code of
+    Exim. It does not link against an external cdb library. The code contains
+    the following statements:
+
+        Copyright (c) 1998 Nigel Metheringham, Planet Online Ltd
+
+        This program is free software; you can redistribute it and/or modify it
+        under the terms of the GNU General Public License as published by the
+        Free Software Foundation; either version 2 of the License, or (at your
+        option) any later version. This code implements Dan Bernstein's
+        Constant DataBase (cdb) spec. Information, the spec and sample code for
+        cdb can be obtained from https://cr.yp.to/cdb.html. This implementation
+        borrows some code from Dan Bernstein's implementation (which has no
+        license restrictions applied to it).
+
+  * Client support for Microsoft's Secure Password Authentication is provided
+    by code contributed by Marc Prud'hommeaux. Server support was contributed
+    by Tom Kistner. This includes code taken from the Samba project, which is
+    released under the Gnu GPL.
+
+  * Support for calling the Cyrus pwcheck and saslauthd daemons is provided by
+    code taken from the Cyrus-SASL library and adapted by Alexander S.
+    Sabourenkov. The permission notice appears below, in accordance with the
+    conditions expressed therein.
+
+        Copyright (c) 2001 Carnegie Mellon University. All rights reserved.
+
+        Redistribution and use in source and binary forms, with or without
+        modification, are permitted provided that the following conditions are
+        met:
+
+         1. Redistributions of source code must retain the above copyright
+            notice, this list of conditions and the following disclaimer.
+
+         2. Redistributions in binary form must reproduce the above copyright
+            notice, this list of conditions and the following disclaimer in the
+            documentation and/or other materials provided with the
+            distribution.
+
+         3. The name "Carnegie Mellon University" must not be used to endorse
+            or promote products derived from this software without prior
+            written permission. For permission or any other legal details,
+            please contact
+
+                          Office of Technology Transfer
+                          Carnegie Mellon University
+                          5000 Forbes Avenue
+                          Pittsburgh, PA  15213-3890
+                          (412) 268-4387, fax: (412) 268-7395
+                          tech-transfer@andrew.cmu.edu
+
+         4. Redistributions of any form whatsoever must retain the following
+            acknowledgment:
+
+            "This product includes software developed by Computing Services at
+            Carnegie Mellon University (https://www.cmu.edu/computing/."
+
+            CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO
+            THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+            AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE
+            FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+            WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+            AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+            OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+            SOFTWARE.
+
+  * The Exim Monitor program, which is an X-Window application, includes
+    modified versions of the Athena StripChart and TextPop widgets. This code
+    is copyright by DEC and MIT, and their permission notice appears below, in
+    accordance with the conditions expressed therein.
+
+        Copyright 1987, 1988 by Digital Equipment Corporation, Maynard,
+        Massachusetts, and the Massachusetts Institute of Technology,
+        Cambridge, Massachusetts.
+
+        All Rights Reserved
+
+        Permission to use, copy, modify, and distribute this software and its
+        documentation for any purpose and without fee is hereby granted,
+        provided that the above copyright notice appear in all copies and that
+        both that copyright notice and this permission notice appear in
+        supporting documentation, and that the names of Digital or MIT not be
+        used in advertising or publicity pertaining to distribution of the
+        software without specific, written prior permission.
+
+        DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+        INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+        EVENT SHALL DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+        CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF
+        USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR
+        OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+        PERFORMANCE OF THIS SOFTWARE.
+
+  * The DMARC implementation uses the OpenDMARC library which is Copyrighted by
+    The Trusted Domain Project. Portions of Exim source which use OpenDMARC
+    derived code are indicated in the respective source files. The full
+    OpenDMARC license is provided in the LICENSE.opendmarc file contained in
+    the distributed source code.
+
+  * Many people have contributed code fragments, some large, some small, that
+    were not covered by any specific license requirements. It is assumed that
+    the contributors are happy to see their code incorporated into Exim under
+    the GPL.
+
+
+
+===============================================================================
+3. HOW EXIM RECEIVES AND DELIVERS MAIL
+
+
+3.1 Overall philosophy
+----------------------
+
+Exim is designed to work efficiently on systems that are permanently connected
+to the Internet and are handling a general mix of mail. In such circumstances,
+most messages can be delivered immediately. Consequently, Exim does not
+maintain independent queues of messages for specific domains or hosts, though
+it does try to send several messages in a single SMTP connection after a host
+has been down, and it also maintains per-host retry information.
+
+
+3.2 Policy control
+------------------
+
+Policy controls are now an important feature of MTAs that are connected to the
+Internet. Perhaps their most important job is to stop MTAs from being abused as
+"open relays" by misguided individuals who send out vast amounts of unsolicited
+junk and want to disguise its source. Exim provides flexible facilities for
+specifying policy controls on incoming mail:
+
+  * Exim 4 (unlike previous versions of Exim) implements policy controls on
+    incoming mail by means of Access Control Lists (ACLs). Each list is a
+    series of statements that may either grant or deny access. ACLs can be used
+    at several places in the SMTP dialogue while receiving a message from a
+    remote host. However, the most common places are after each RCPT command,
+    and at the very end of the message. The sysadmin can specify conditions for
+    accepting or rejecting individual recipients or the entire message,
+    respectively, at these two points (see chapter 44). Denial of access
+    results in an SMTP error code.
+
+  * An ACL is also available for locally generated, non-SMTP messages. In this
+    case, the only available actions are to accept or deny the entire message.
+
+  * When Exim is compiled with the content-scanning extension, facilities are
+    provided in the ACL mechanism for passing the message to external virus and
+    /or spam scanning software. The result of such a scan is passed back to the
+    ACL, which can then use it to decide what to do with the message.
+
+  * When a message has been received, either from a remote host or from the
+    local host, but before the final acknowledgment has been sent, a locally
+    supplied C function called local_scan() can be run to inspect the message
+    and decide whether to accept it or not (see chapter 46). If the message is
+    accepted, the list of recipients can be modified by the function.
+
+  * Using the local_scan() mechanism is another way of calling external scanner
+    software. The SA-Exim add-on package works this way. It does not require
+    Exim to be compiled with the content-scanning extension.
+
+  * After a message has been accepted, a further checking mechanism is
+    available in the form of the system filter (see chapter 47). This runs at
+    the start of every delivery process.
+
+
+3.3 User filters
+----------------
+
+In a conventional Exim configuration, users are able to run private filters by
+setting up appropriate .forward files in their home directories. See chapter 22
+(about the redirect router) for the configuration needed to support this, and
+the separate document entitled Exim's interfaces to mail filtering for user
+details. Two different kinds of filtering are available:
+
+  * Sieve filters are written in the standard filtering language that is
+    defined by RFC 3028.
+
+  * Exim filters are written in a syntax that is unique to Exim, but which is
+    more powerful than Sieve, which it pre-dates.
+
+User filters are run as part of the routing process, described below.
+
+
+3.4 Message identification
+--------------------------
+
+Every message handled by Exim is given a message id which is sixteen characters
+long. It is divided into three parts, separated by hyphens, for example
+"16VDhn-0001bo-D3". Each part is a sequence of letters and digits, normally
+encoding numbers in base 62. However, in the Darwin operating system (Mac OS X)
+and when Exim is compiled to run under Cygwin, base 36 (avoiding the use of
+lower case letters) is used instead, because the message id is used to
+construct filenames, and the names of files in those systems are not always
+case-sensitive.
+
+The detail of the contents of the message id have changed as Exim has evolved.
+Earlier versions relied on the operating system not re-using a process id (pid)
+within one second. On modern operating systems, this assumption can no longer
+be made, so the algorithm had to be changed. To retain backward compatibility,
+the format of the message id was retained, which is why the following rules are
+somewhat eccentric:
+
+  * The first six characters of the message id are the time at which the
+    message started to be received, to a granularity of one second. That is,
+    this field contains the number of seconds since the start of the epoch (the
+    normal Unix way of representing the date and time of day).
+
+  * After the first hyphen, the next six characters are the id of the process
+    that received the message.
+
+  * There are two different possibilities for the final two characters:
+
+     1. If localhost_number is not set, this value is the fractional part of
+        the time of reception, normally in units of 1/2000 of a second, but for
+        systems that must use base 36 instead of base 62 (because of
+        case-insensitive file systems), the units are 1/1000 of a second.
+
+     2. If localhost_number is set, it is multiplied by 200 (100) and added to
+        the fractional part of the time, which in this case is in units of 1/
+        200 (1/100) of a second.
+
+After a message has been received, Exim waits for the clock to tick at the
+appropriate resolution before proceeding, so that if another message is
+received by the same process, or by another process with the same (re-used)
+pid, it is guaranteed that the time will be different. In most cases, the clock
+will already have ticked while the message was being received.
+
+
+3.5 Receiving mail
+------------------
+
+The only way Exim can receive mail from another host is using SMTP over TCP/IP,
+in which case the sender and recipient addresses are transferred using SMTP
+commands. However, from a locally running process (such as a user's MUA), there
+are several possibilities:
+
+  * If the process runs Exim with the -bm option, the message is read
+    non-interactively (usually via a pipe), with the recipients taken from the
+    command line, or from the body of the message if -t is also used.
+
+  * If the process runs Exim with the -bS option, the message is also read
+    non-interactively, but in this case the recipients are listed at the start
+    of the message in a series of SMTP RCPT commands, terminated by a DATA
+    command. This is called "batch SMTP" format, but it isn't really SMTP. The
+    SMTP commands are just another way of passing envelope addresses in a
+    non-interactive submission.
+
+  * If the process runs Exim with the -bs option, the message is read
+    interactively, using the SMTP protocol. A two-way pipe is normally used for
+    passing data between the local process and the Exim process. This is "real"
+    SMTP and is handled in the same way as SMTP over TCP/IP. For example, the
+    ACLs for SMTP commands are used for this form of submission.
+
+  * A local process may also make a TCP/IP call to the host's loopback address
+    (127.0.0.1) or any other of its IP addresses. When receiving messages, Exim
+    does not treat the loopback address specially. It treats all such
+    connections in the same way as connections from other hosts.
+
+In the three cases that do not involve TCP/IP, the sender address is
+constructed from the login name of the user that called Exim and a default
+qualification domain (which can be set by the qualify_domain configuration
+option). For local or batch SMTP, a sender address that is passed using the
+SMTP MAIL command is ignored. However, the system administrator may allow
+certain users ("trusted users") to specify a different sender addresses
+unconditionally, or all users to specify certain forms of different sender
+address. The -f option or the SMTP MAIL command is used to specify these
+different addresses. See section 5.2 for details of trusted users, and the 
+untrusted_set_sender option for a way of allowing untrusted users to change
+sender addresses.
+
+Messages received by either of the non-interactive mechanisms are subject to
+checking by the non-SMTP ACL if one is defined. Messages received using SMTP
+(either over TCP/IP or interacting with a local process) can be checked by a
+number of ACLs that operate at different times during the SMTP session. Either
+individual recipients or the entire message can be rejected if local policy
+requirements are not met. The local_scan() function (see chapter 46) is run for
+all incoming messages.
+
+Exim can be configured not to start a delivery process when a message is
+received; this can be unconditional, or depend on the number of incoming SMTP
+connections or the system load. In these situations, new messages wait on the
+queue until a queue runner process picks them up. However, in standard
+configurations under normal conditions, delivery is started as soon as a
+message is received.
+
+
+3.6 Handling an incoming message
+--------------------------------
+
+When Exim accepts a message, it writes two files in its spool directory. The
+first contains the envelope information, the current status of the message, and
+the header lines, and the second contains the body of the message. The names of
+the two spool files consist of the message id, followed by "-H" for the file
+containing the envelope and header, and "-D" for the data file.
+
+By default, all these message files are held in a single directory called input
+inside the general Exim spool directory. Some operating systems do not perform
+very well if the number of files in a directory gets large; to improve
+performance in such cases, the split_spool_directory option can be used. This
+causes Exim to split up the input files into 62 sub-directories whose names are
+single letters or digits. When this is done, the queue is processed one
+sub-directory at a time instead of all at once, which can improve overall
+performance even when there are not enough files in each directory to affect
+file system performance.
+
+The envelope information consists of the address of the message's sender and
+the addresses of the recipients. This information is entirely separate from any
+addresses contained in the header lines. The status of the message includes a
+list of recipients who have already received the message. The format of the
+first spool file is described in chapter 57.
+
+Address rewriting that is specified in the rewrite section of the configuration
+(see chapter 31) is done once and for all on incoming addresses, both in the
+header lines and the envelope, at the time the message is accepted. If during
+the course of delivery additional addresses are generated (for example, via
+aliasing), these new addresses are rewritten as soon as they are generated. At
+the time a message is actually delivered (transported) further rewriting can
+take place; because this is a transport option, it can be different for
+different forms of delivery. It is also possible to specify the addition or
+removal of certain header lines at the time the message is delivered (see
+chapters 15 and 24).
+
+
+3.7 Life of a message
+---------------------
+
+A message remains in the spool directory until it is completely delivered to
+its recipients or to an error address, or until it is deleted by an
+administrator or by the user who originally created it. In cases when delivery
+cannot proceed - for example when a message can neither be delivered to its
+recipients nor returned to its sender, the message is marked "frozen" on the
+spool, and no more deliveries are attempted.
+
+An administrator can "thaw" such messages when the problem has been corrected,
+and can also freeze individual messages by hand if necessary. In addition, an
+administrator can force a delivery error, causing a bounce message to be sent.
+
+There are options called ignore_bounce_errors_after and timeout_frozen_after,
+which discard frozen messages after a certain time. The first applies only to
+frozen bounces, the second to all frozen messages.
+
+While Exim is working on a message, it writes information about each delivery
+attempt to its main log file. This includes successful, unsuccessful, and
+delayed deliveries for each recipient (see chapter 53). The log lines are also
+written to a separate message log file for each message. These logs are solely
+for the benefit of the administrator and are normally deleted along with the
+spool files when processing of a message is complete. The use of individual
+message logs can be disabled by setting no_message_logs; this might give an
+improvement in performance on very busy systems.
+
+All the information Exim itself needs to set up a delivery is kept in the first
+spool file, along with the header lines. When a successful delivery occurs, the
+address is immediately written at the end of a journal file, whose name is the
+message id followed by "-J". At the end of a delivery run, if there are some
+addresses left to be tried again later, the first spool file (the "-H" file) is
+updated to indicate which these are, and the journal file is then deleted.
+Updating the spool file is done by writing a new file and renaming it, to
+minimize the possibility of data loss.
+
+Should the system or Exim crash after a successful delivery but before the
+spool file has been updated, the journal is left lying around. The next time
+Exim attempts to deliver the message, it reads the journal file and updates the
+spool file before proceeding. This minimizes the chances of double deliveries
+caused by crashes.
+
+
+3.8 Processing an address for delivery
+--------------------------------------
+
+The main delivery processing elements of Exim are called routers and transports
+, and collectively these are known as drivers. Code for a number of them is
+provided in the source distribution, and compile-time options specify which
+ones are included in the binary. Runtime options specify which ones are
+actually used for delivering messages.
+
+Each driver that is specified in the runtime configuration is an instance of
+that particular driver type. Multiple instances are allowed; for example, you
+can set up several different smtp transports, each with different option values
+that might specify different ports or different timeouts. Each instance has its
+own identifying name. In what follows we will normally use the instance name
+when discussing one particular instance (that is, one specific configuration of
+the driver), and the generic driver name when discussing the driver's features
+in general.
+
+A router is a driver that operates on an address, either determining how its
+delivery should happen, by assigning it to a specific transport, or converting
+the address into one or more new addresses (for example, via an alias file). A
+router may also explicitly choose to fail an address, causing it to be bounced.
+
+A transport is a driver that transmits a copy of the message from Exim's spool
+to some destination. There are two kinds of transport: for a local transport,
+the destination is a file or a pipe on the local host, whereas for a remote
+transport the destination is some other host. A message is passed to a specific
+transport as a result of successful routing. If a message has several
+recipients, it may be passed to a number of different transports.
+
+An address is processed by passing it to each configured router instance in
+turn, subject to certain preconditions, until a router accepts the address or
+specifies that it should be bounced. We will describe this process in more
+detail shortly. First, as a simple example, we consider how each recipient
+address in a message is processed in a small configuration of three routers.
+
+To make this a more concrete example, it is described in terms of some actual
+routers, but remember, this is only an example. You can configure Exim's
+routers in many different ways, and there may be any number of routers in a
+configuration.
+
+The first router that is specified in a configuration is often one that handles
+addresses in domains that are not recognized specifically by the local host.
+Typically these are addresses for arbitrary domains on the Internet. A
+precondition is set up which looks for the special domains known to the host
+(for example, its own domain name), and the router is run for addresses that do
+not match. Typically, this is a router that looks up domains in the DNS in
+order to find the hosts to which this address routes. If it succeeds, the
+address is assigned to a suitable SMTP transport; if it does not succeed, the
+router is configured to fail the address.
+
+The second router is reached only when the domain is recognized as one that
+"belongs" to the local host. This router does redirection - also known as
+aliasing and forwarding. When it generates one or more new addresses from the
+original, each of them is routed independently from the start. Otherwise, the
+router may cause an address to fail, or it may simply decline to handle the
+address, in which case the address is passed to the next router.
+
+The final router in many configurations is one that checks to see if the
+address belongs to a local mailbox. The precondition may involve a check to see
+if the local part is the name of a login account, or it may look up the local
+part in a file or a database. If its preconditions are not met, or if the
+router declines, we have reached the end of the routers. When this happens, the
+address is bounced.
+
+
+3.9 Processing an address for verification
+------------------------------------------
+
+As well as being used to decide how to deliver to an address, Exim's routers
+are also used for address verification. Verification can be requested as one of
+the checks to be performed in an ACL for incoming messages, on both sender and
+recipient addresses, and it can be tested using the -bv and -bvs command line
+options.
+
+When an address is being verified, the routers are run in "verify mode". This
+does not affect the way the routers work, but it is a state that can be
+detected. By this means, a router can be skipped or made to behave differently
+when verifying. A common example is a configuration in which the first router
+sends all messages to a message-scanning program unless they have been
+previously scanned. Thus, the first router accepts all addresses without any
+checking, making it useless for verifying. Normally, the no_verify option would
+be set for such a router, causing it to be skipped in verify mode.
+
+
+3.10 Running an individual router
+---------------------------------
+
+As explained in the example above, a number of preconditions are checked before
+running a router. If any are not met, the router is skipped, and the address is
+passed to the next router. When all the preconditions on a router are met, the
+router is run. What happens next depends on the outcome, which is one of the
+following:
+
+  * accept: The router accepts the address, and either assigns it to a
+    transport or generates one or more "child" addresses. Processing the
+    original address ceases unless the unseen option is set on the router. This
+    option can be used to set up multiple deliveries with different routing
+    (for example, for keeping archive copies of messages). When unseen is set,
+    the address is passed to the next router. Normally, however, an accept
+    return marks the end of routing.
+
+    Any child addresses generated by the router are processed independently,
+    starting with the first router by default. It is possible to change this by
+    setting the redirect_router option to specify which router to start at for
+    child addresses. Unlike pass_router (see below) the router specified by 
+    redirect_router may be anywhere in the router configuration.
+
+  * pass: The router recognizes the address, but cannot handle it itself. It
+    requests that the address be passed to another router. By default, the
+    address is passed to the next router, but this can be changed by setting
+    the pass_router option. However, (unlike redirect_router) the named router
+    must be below the current router (to avoid loops).
+
+  * decline: The router declines to accept the address because it does not
+    recognize it at all. By default, the address is passed to the next router,
+    but this can be prevented by setting the no_more option. When no_more is
+    set, all the remaining routers are skipped. In effect, no_more converts 
+    decline into fail.
+
+  * fail: The router determines that the address should fail, and queues it for
+    the generation of a bounce message. There is no further processing of the
+    original address unless unseen is set on the router.
+
+  * defer: The router cannot handle the address at the present time. (A
+    database may be offline, or a DNS lookup may have timed out.) No further
+    processing of the address happens in this delivery attempt. It is tried
+    again next time the message is considered for delivery.
+
+  * error: There is some error in the router (for example, a syntax error in
+    its configuration). The action is as for defer.
+
+If an address reaches the end of the routers without having been accepted by
+any of them, it is bounced as unrouteable. The default error message in this
+situation is "unrouteable address", but you can set your own message by making
+use of the cannot_route_message option. This can be set for any router; the
+value from the last router that "saw" the address is used.
+
+Sometimes while routing you want to fail a delivery when some conditions are
+met but others are not, instead of passing the address on for further routing.
+You can do this by having a second router that explicitly fails the delivery
+when the relevant conditions are met. The redirect router has a "fail" facility
+for this purpose.
+
+
+3.11 Duplicate addresses
+------------------------
+
+Once routing is complete, Exim scans the addresses that are assigned to local
+and remote transports and discards any duplicates that it finds. During this
+check, local parts are treated case-sensitively. This happens only when
+actually delivering a message; when testing routers with -bt, all the routed
+addresses are shown.
+
+
+3.12 Router preconditions
+-------------------------
+
+The preconditions that are tested for each router are listed below, in the
+order in which they are tested. The individual configuration options are
+described in more detail in chapter 15.
+
+  * The local_part_prefix and local_part_suffix options can specify that the
+    local parts handled by the router may or must have certain prefixes and/or
+    suffixes. If a mandatory affix (prefix or suffix) is not present, the
+    router is skipped. These conditions are tested first. When an affix is
+    present, it is removed from the local part before further processing,
+    including the evaluation of any other conditions.
+
+  * Routers can be designated for use only when not verifying an address, that
+    is, only when routing it for delivery (or testing its delivery routing). If
+    the verify option is set false, the router is skipped when Exim is
+    verifying an address. Setting the verify option actually sets two options, 
+    verify_sender and verify_recipient, which independently control the use of
+    the router for sender and recipient verification. You can set these options
+    directly if you want a router to be used for only one type of verification.
+    Note that cutthrough delivery is classed as a recipient verification for
+    this purpose.
+
+  * If the address_test option is set false, the router is skipped when Exim is
+    run with the -bt option to test an address routing. This can be helpful
+    when the first router sends all new messages to a scanner of some sort; it
+    makes it possible to use -bt to test subsequent delivery routing without
+    having to simulate the effect of the scanner.
+
+  * Routers can be designated for use only when verifying an address, as
+    opposed to routing it for delivery. The verify_only option controls this.
+    Again, cutthrough delivery counts as a verification.
+
+  * Individual routers can be explicitly skipped when running the routers to
+    check an address given in the SMTP EXPN command (see the expn option).
+
+  * If the domains option is set, the domain of the address must be in the set
+    of domains that it defines. A match verifies the variable $domain (which
+    carries tainted data) and assigns an untainted value to the $domain_data
+    variable. Such an untainted value is often needed in the transport. For
+    specifics of the matching operation and the resulting untainted value,
+    refer to section 10.9.
+
+    When an untainted value is wanted, use this option rather than the generic 
+    condition option.
+
+  * If the local_parts option is set, the local part of the address must be in
+    the set of local parts that it defines. A match verifies the variable
+    $local_part (which carries tainted data) and assigns an untainted value to
+    the $local_part_data variable. Such an untainted value is often needed in
+    the transport. For specifics of the matching operation and the resulting
+    untainted value, refer to section 10.22.
+
+    When an untainted value is wanted, use this option rather than the generic 
+    condition option.
+
+    If local_part_prefix or local_part_suffix is in use, the prefix or suffix
+    is removed from the local part before this check. If you want to do
+    precondition tests on local parts that include affixes, you can do so by
+    using a condition option (see below) that uses the variables $local_part,
+    $local_part_prefix, $local_part_prefix_v, $local_part_suffix and
+    $local_part_suffix_v as necessary.
+
+  * If the check_local_user option is set, the local part must be the name of
+    an account on the local host. If this check succeeds, the uid and gid of
+    the local user are placed in $local_user_uid and $local_user_gid and the
+    user's home directory is placed in $home; these values can be used in the
+    remaining preconditions.
+
+  * If the router_home_directory option is set, it is expanded at this point,
+    because it overrides the value of $home. If this expansion were left till
+    later, the value of $home as set by check_local_user would be used in
+    subsequent tests. Having two different values of $home in the same router
+    could lead to confusion.
+
+  * If the senders option is set, the envelope sender address must be in the
+    set of addresses that it defines.
+
+  * If the require_files option is set, the existence or non-existence of
+    specified files is tested.
+
+  * If the condition option is set, it is evaluated and tested. This option
+    uses an expanded string to allow you to set up your own custom
+    preconditions. Expanded strings are described in chapter 11.
+
+    Note that while using this option for address matching technically works,
+    it does not set any de-tainted values. Such values are often needed, either
+    for router-specific options or for transport options. Using the domains and
+    local_parts options is usually the most convenient way to obtain them.
+
+Note that require_files comes near the end of the list, so you cannot use it to
+check for the existence of a file in which to lookup up a domain, local part,
+or sender. However, as these options are all expanded, you can use the exists
+expansion condition to make such tests within each condition. The require_files
+option is intended for checking files that the router may be going to use
+internally, or which are needed by a specific transport (for example,
+.procmailrc).
+
+
+3.13 Delivery in detail
+-----------------------
+
+When a message is to be delivered, the sequence of events is as follows:
+
+  * If a system-wide filter file is specified, the message is passed to it. The
+    filter may add recipients to the message, replace the recipients, discard
+    the message, cause a new message to be generated, or cause the message
+    delivery to fail. The format of the system filter file is the same as for
+    Exim user filter files, described in the separate document entitled Exim's
+    interfaces to mail filtering. (Note: Sieve cannot be used for system filter
+    files.)
+
+    Some additional features are available in system filters - see chapter 47
+    for details. Note that a message is passed to the system filter only once
+    per delivery attempt, however many recipients it has. However, if there are
+    several delivery attempts because one or more addresses could not be
+    immediately delivered, the system filter is run each time. The filter
+    condition first_delivery can be used to detect the first run of the system
+    filter.
+
+  * Each recipient address is offered to each configured router, in turn,
+    subject to its preconditions, until one is able to handle it. If no router
+    can handle the address, that is, if they all decline, the address is
+    failed. Because routers can be targeted at particular domains, several
+    locally handled domains can be processed entirely independently of each
+    other.
+
+  * A router that accepts an address may assign it to a local or a remote
+    transport. However, the transport is not run at this time. Instead, the
+    address is placed on a list for the particular transport, which will be run
+    later. Alternatively, the router may generate one or more new addresses
+    (typically from alias, forward, or filter files). New addresses are fed
+    back into this process from the top, but in order to avoid loops, a router
+    ignores any address which has an identically-named ancestor that was
+    processed by itself.
+
+  * When all the routing has been done, addresses that have been successfully
+    handled are passed to their assigned transports. When local transports are
+    doing real local deliveries, they handle only one address at a time, but if
+    a local transport is being used as a pseudo-remote transport (for example,
+    to collect batched SMTP messages for transmission by some other means)
+    multiple addresses can be handled. Remote transports can always handle more
+    than one address at a time, but can be configured not to do so, or to
+    restrict multiple addresses to the same domain.
+
+  * Each local delivery to a file or a pipe runs in a separate process under a
+    non-privileged uid, and these deliveries are run one at a time. Remote
+    deliveries also run in separate processes, normally under a uid that is
+    private to Exim ("the Exim user"), but in this case, several remote
+    deliveries can be run in parallel. The maximum number of simultaneous
+    remote deliveries for any one message is set by the remote_max_parallel
+    option. The order in which deliveries are done is not defined, except that
+    all local deliveries happen before any remote deliveries.
+
+  * When it encounters a local delivery during a queue run, Exim checks its
+    retry database to see if there has been a previous temporary delivery
+    failure for the address before running the local transport. If there was a
+    previous failure, Exim does not attempt a new delivery until the retry time
+    for the address is reached. However, this happens only for delivery
+    attempts that are part of a queue run. Local deliveries are always
+    attempted when delivery immediately follows message reception, even if
+    retry times are set for them. This makes for better behaviour if one
+    particular message is causing problems (for example, causing quota
+    overflow, or provoking an error in a filter file).
+
+  * Remote transports do their own retry handling, since an address may be
+    deliverable to one of a number of hosts, each of which may have a different
+    retry time. If there have been previous temporary failures and no host has
+    reached its retry time, no delivery is attempted, whether in a queue run or
+    not. See chapter 32 for details of retry strategies.
+
+  * If there were any permanent errors, a bounce message is returned to an
+    appropriate address (the sender in the common case), with details of the
+    error for each failing address. Exim can be configured to send copies of
+    bounce messages to other addresses.
+
+  * If one or more addresses suffered a temporary failure, the message is left
+    on the queue, to be tried again later. Delivery of these addresses is said
+    to be deferred.
+
+  * When all the recipient addresses have either been delivered or bounced,
+    handling of the message is complete. The spool files and message log are
+    deleted, though the message log can optionally be preserved if required.
+
+
+3.14 Retry mechanism
+--------------------
+
+Exim's mechanism for retrying messages that fail to get delivered at the first
+attempt is the queue runner process. You must either run an Exim daemon that
+uses the -q option with a time interval to start queue runners at regular
+intervals or use some other means (such as cron) to start them. If you do not
+arrange for queue runners to be run, messages that fail temporarily at the
+first attempt will remain in your queue forever. A queue runner process works
+its way through the queue, one message at a time, trying each delivery that has
+passed its retry time. You can run several queue runners at once.
+
+Exim uses a set of configured rules to determine when next to retry the failing
+address (see chapter 32). These rules also specify when Exim should give up
+trying to deliver to the address, at which point it generates a bounce message.
+If no retry rules are set for a particular host, address, and error
+combination, no retries are attempted, and temporary errors are treated as
+permanent.
+
+
+3.15 Temporary delivery failure
+-------------------------------
+
+There are many reasons why a message may not be immediately deliverable to a
+particular address. Failure to connect to a remote machine (because it, or the
+connection to it, is down) is one of the most common. Temporary failures may be
+detected during routing as well as during the transport stage of delivery.
+Local deliveries may be delayed if NFS files are unavailable, or if a mailbox
+is on a file system where the user is over quota. Exim can be configured to
+impose its own quotas on local mailboxes; where system quotas are set they will
+also apply.
+
+If a host is unreachable for a period of time, a number of messages may be
+waiting for it by the time it recovers, and sending them in a single SMTP
+connection is clearly beneficial. Whenever a delivery to a remote host is
+deferred, Exim makes a note in its hints database, and whenever a successful
+SMTP delivery has happened, it looks to see if any other messages are waiting
+for the same host. If any are found, they are sent over the same SMTP
+connection, subject to a configuration limit as to the maximum number in any
+one connection.
+
+
+3.16 Permanent delivery failure
+-------------------------------
+
+When a message cannot be delivered to some or all of its intended recipients, a
+bounce message is generated. Temporary delivery failures turn into permanent
+errors when their timeout expires. All the addresses that fail in a given
+delivery attempt are listed in a single message. If the original message has
+many recipients, it is possible for some addresses to fail in one delivery
+attempt and others to fail subsequently, giving rise to more than one bounce
+message. The wording of bounce messages can be customized by the administrator.
+See chapter 50 for details.
+
+Bounce messages contain an X-Failed-Recipients: header line that lists the
+failed addresses, for the benefit of programs that try to analyse such messages
+automatically.
+
+A bounce message is normally sent to the sender of the original message, as
+obtained from the message's envelope. For incoming SMTP messages, this is the
+address given in the MAIL command. However, when an address is expanded via a
+forward or alias file, an alternative address can be specified for delivery
+failures of the generated addresses. For a mailing list expansion (see section
+51.2) it is common to direct bounce messages to the manager of the list.
+
+
+3.17 Failures to deliver bounce messages
+----------------------------------------
+
+If a bounce message (either locally generated or received from a remote host)
+itself suffers a permanent delivery failure, the message is left in the queue,
+but it is frozen, awaiting the attention of an administrator. There are options
+that can be used to make Exim discard such failed messages, or to keep them for
+only a short time (see timeout_frozen_after and ignore_bounce_errors_after).
+
+
+
+===============================================================================
+4. BUILDING AND INSTALLING EXIM
+
+
+4.1 Unpacking
+-------------
+
+Exim is distributed as a gzipped or bzipped tar file which, when unpacked,
+creates a directory with the name of the current release (for example,
+exim-4.96) into which the following files are placed:
+
+    ACKNOWLEDGMENTS contains some acknowledgments
+    CHANGES         contains a reference to where changes are documented
+    LICENCE         the GNU General Public Licence
+    Makefile        top-level make file
+    NOTICE          conditions for the use of Exim
+    README          list of files, directories and simple build instructions
+
+Other files whose names begin with README may also be present. The following
+subdirectories are created:
+
+    Local        an empty directory for local configuration files
+    OS           OS-specific files
+    doc          documentation files
+    exim_monitor source files for the Exim monitor
+    scripts      scripts used in the build process
+    src          remaining source files
+    util         independent utilities
+
+The main utility programs are contained in the src directory and are built with
+the Exim binary. The util directory contains a few optional scripts that may be
+useful to some sites.
+
+
+4.2 Multiple machine architectures and operating systems
+--------------------------------------------------------
+
+The building process for Exim is arranged to make it easy to build binaries for
+a number of different architectures and operating systems from the same set of
+source files. Compilation does not take place in the src directory. Instead, a 
+build directory is created for each architecture and operating system. Symbolic
+links to the sources are installed in this directory, which is where the actual
+building takes place. In most cases, Exim can discover the machine architecture
+and operating system for itself, but the defaults can be overridden if
+necessary. A C99-capable compiler will be required for the build.
+
+
+4.3 PCRE2 library
+-----------------
+
+Exim no longer has an embedded regular-expression library as the vast majority
+of modern systems include PCRE2 as a system library, although you may need to
+install the PCRE2 package or the PCRE2 development package for your operating
+system. If your system has a normal PCRE2 installation the Exim build process
+will need no further configuration. If the library or the headers are in an
+unusual location you will need to either set the PCRE2_LIBS and INCLUDE
+directives appropriately, or set PCRE2_CONFIG=yes to use the installed 
+pcre-config command. If your operating system has no PCRE2 support then you
+will need to obtain and build the current PCRE2 from https://github.com/
+PhilipHazel/pcre2/releases. More information on PCRE2 is available at https://
+www.pcre.org/.
+
+
+4.4 DBM libraries
+-----------------
+
+Even if you do not use any DBM files in your configuration, Exim still needs a
+DBM library in order to operate, because it uses indexed files for its hints
+databases. Unfortunately, there are a number of DBM libraries in existence, and
+different operating systems often have different ones installed.
+
+If you are using Solaris, IRIX, one of the modern BSD systems, or a modern
+Linux distribution, the DBM configuration should happen automatically, and you
+may be able to ignore this section. Otherwise, you may have to learn more than
+you would like about DBM libraries from what follows.
+
+Licensed versions of Unix normally contain a library of DBM functions operating
+via the ndbm interface, and this is what Exim expects by default. Free versions
+of Unix seem to vary in what they contain as standard. In particular, some
+early versions of Linux have no default DBM library, and different distributors
+have chosen to bundle different libraries with their packaged versions.
+However, the more recent releases seem to have standardized on the Berkeley DB
+library.
+
+Different DBM libraries have different conventions for naming the files they
+use. When a program opens a file called dbmfile, there are several
+possibilities:
+
+ 1. A traditional ndbm implementation, such as that supplied as part of
+    Solaris, operates on two files called dbmfile.dir and dbmfile.pag.
+
+ 2. The GNU library, gdbm, operates on a single file. If used via its ndbm
+    compatibility interface it makes two different hard links to it with names
+    dbmfile.dir and dbmfile.pag, but if used via its native interface, the
+    filename is used unmodified.
+
+ 3. The Berkeley DB package, if called via its ndbm compatibility interface,
+    operates on a single file called dbmfile.db, but otherwise looks to the
+    programmer exactly the same as the traditional ndbm implementation.
+
+ 4. If the Berkeley package is used in its native mode, it operates on a single
+    file called dbmfile; the programmer's interface is somewhat different to
+    the traditional ndbm interface.
+
+ 5. To complicate things further, there are several very different versions of
+    the Berkeley DB package. Version 1.85 was stable for a very long time,
+    releases 2.x and 3.x were current for a while,
+
+    but the latest versions when Exim last revamped support were numbered 5.x.
+    Maintenance of some of the earlier releases has ceased, and Exim no longer
+    supports versions before 3.x.
+
+    All versions of Berkeley DB could be obtained from http://www.sleepycat.com
+    /, which is now a redirect to their new owner's page with far newer
+    versions listed. It is probably wise to plan to move your storage
+    configurations away from Berkeley DB format, as today there are smaller and
+    simpler alternatives more suited to Exim's usage model.
+
+ 6. Yet another DBM library, called tdb, is available from https://
+    sourceforge.net/projects/tdb/files/. It has its own interface, and also
+    operates on a single file.
+
+Exim and its utilities can be compiled to use any of these interfaces. In order
+to use any version of the Berkeley DB package in native mode, you must set
+USE_DB in an appropriate configuration file (typically Local/Makefile). For
+example:
+
+USE_DB=yes
+
+Similarly, for gdbm you set USE_GDBM, and for tdb you set USE_TDB. An error is
+diagnosed if you set more than one of these.
+
+You can set USE_NDBM if needed to override an operating system default.
+
+At the lowest level, the build-time configuration sets none of these options,
+thereby assuming an interface of type (1). However, some operating system
+configuration files (for example, those for the BSD operating systems and
+Linux) assume type (4) by setting USE_DB as their default, and the
+configuration files for Cygwin set USE_GDBM. Anything you set in Local/Makefile
+, however, overrides these system defaults.
+
+As well as setting USE_DB, USE_GDBM, or USE_TDB, it may also be necessary to
+set DBMLIB, to cause inclusion of the appropriate library, as in one of these
+lines:
+
+DBMLIB = -ldb
+DBMLIB = -ltdb
+DBMLIB = -lgdbm -lgdbm_compat
+
+The last of those was for a Linux having GDBM provide emulated NDBM facilities.
+
+Settings like that will work if the DBM library is installed in the standard
+place. Sometimes it is not, and the library's header file may also not be in
+the default path. You may need to set INCLUDE to specify where the header file
+is, and to specify the path to the library more fully in DBMLIB, as in this
+example:
+
+INCLUDE=-I/usr/local/include/db-4.1
+DBMLIB=/usr/local/lib/db-4.1/libdb.a
+
+There is further detailed discussion about the various DBM libraries in the
+file doc/dbm.discuss.txt in the Exim distribution.
+
+
+4.5 Pre-building configuration
+------------------------------
+
+Before building Exim, a local configuration file that specifies options
+independent of any operating system has to be created with the name Local/
+Makefile. A template for this file is supplied as the file src/EDITME, and it
+contains full descriptions of all the option settings therein. These
+descriptions are therefore not repeated here. If you are building Exim for the
+first time, the simplest thing to do is to copy src/EDITME to Local/Makefile,
+then read it and edit it appropriately.
+
+There are three settings that you must supply, because Exim will not build
+without them. They are the location of the runtime configuration file
+(CONFIGURE_FILE), the directory in which Exim binaries will be installed
+(BIN_DIRECTORY), and the identity of the Exim user (EXIM_USER and maybe
+EXIM_GROUP as well). The value of CONFIGURE_FILE can in fact be a
+colon-separated list of filenames; Exim uses the first of them that exists.
+
+There are a few other parameters that can be specified either at build time or
+at runtime, to enable the same binary to be used on a number of different
+machines. However, if the locations of Exim's spool directory and log file
+directory (if not within the spool directory) are fixed, it is recommended that
+you specify them in Local/Makefile instead of at runtime, so that errors
+detected early in Exim's execution (such as a malformed configuration file) can
+be logged.
+
+Exim's interfaces for calling virus and spam scanning software directly from
+access control lists are not compiled by default. If you want to include these
+facilities, you need to set
+
+WITH_CONTENT_SCAN=yes
+
+in your Local/Makefile. For details of the facilities themselves, see chapter
+45.
+
+If you are going to build the Exim monitor, a similar configuration process is
+required. The file exim_monitor/EDITME must be edited appropriately for your
+installation and saved under the name Local/eximon.conf. If you are happy with
+the default settings described in exim_monitor/EDITME, Local/eximon.conf can be
+empty, but it must exist.
+
+This is all the configuration that is needed in straightforward cases for known
+operating systems. However, the building process is set up so that it is easy
+to override options that are set by default or by operating-system-specific
+configuration files, for example, to change the C compiler, which defaults to 
+gcc. See section 4.13 below for details of how to do this.
+
+
+4.6 Support for iconv()
+-----------------------
+
+The contents of header lines in messages may be encoded according to the rules
+described RFC 2047. This makes it possible to transmit characters that are not
+in the ASCII character set, and to label them as being in a particular
+character set. When Exim is inspecting header lines by means of the $h_
+mechanism, it decodes them, and translates them into a specified character set
+(default is set at build time). The translation is possible only if the
+operating system supports the iconv() function.
+
+However, some of the operating systems that supply iconv() do not support very
+many conversions. The GNU libiconv library (available from https://www.gnu.org/
+software/libiconv/) can be installed on such systems to remedy this deficiency,
+as well as on systems that do not supply iconv() at all. After installing 
+libiconv, you should add
+
+HAVE_ICONV=yes
+
+to your Local/Makefile and rebuild Exim.
+
+
+4.7 Including TLS/SSL encryption support
+----------------------------------------
+
+Exim is usually built to support encrypted SMTP connections, using the STARTTLS
+command as per RFC 2487. It can also support clients that expect to start a TLS
+session immediately on connection to a non-standard port (see the 
+tls_on_connect_ports runtime option and the -tls-on-connect command line
+option).
+
+If you want to build Exim with TLS support, you must first install either the
+OpenSSL or GnuTLS library. There is no cryptographic code in Exim itself for
+implementing SSL.
+
+If you do not want TLS support you should set
+
+DISABLE_TLS=yes
+
+in Local/Makefile.
+
+If OpenSSL is installed, you should set
+
+USE_OPENSL=yes
+TLS_LIBS=-lssl -lcrypto
+
+in Local/Makefile. You may also need to specify the locations of the OpenSSL
+library and include files. For example:
+
+USE_OPENSSL=yes
+TLS_LIBS=-L/usr/local/openssl/lib -lssl -lcrypto
+TLS_INCLUDE=-I/usr/local/openssl/include/
+
+If you have pkg-config available, then instead you can just use:
+
+USE_OPENSSL=yes
+USE_OPENSSL_PC=openssl
+
+If GnuTLS is installed, you should set
+
+USE_GNUTLS=yes
+TLS_LIBS=-lgnutls -ltasn1 -lgcrypt
+
+in Local/Makefile, and again you may need to specify the locations of the
+library and include files. For example:
+
+USE_GNUTLS=yes
+TLS_LIBS=-L/usr/gnu/lib -lgnutls -ltasn1 -lgcrypt
+TLS_INCLUDE=-I/usr/gnu/include
+
+If you have pkg-config available, then instead you can just use:
+
+USE_GNUTLS=yes
+USE_GNUTLS_PC=gnutls
+
+You do not need to set TLS_INCLUDE if the relevant directory is already
+specified in INCLUDE. Details of how to configure Exim to make use of TLS are
+given in chapter 43.
+
+
+4.8 Use of tcpwrappers
+----------------------
+
+Exim can be linked with the tcpwrappers library in order to check incoming SMTP
+calls using the tcpwrappers control files. This may be a convenient alternative
+to Exim's own checking facilities for installations that are already making use
+of tcpwrappers for other purposes. To do this, you should set USE_TCP_WRAPPERS
+in Local/Makefile, arrange for the file tcpd.h to be available at compile time,
+and also ensure that the library libwrap.a is available at link time, typically
+by including -lwrap in EXTRALIBS_EXIM. For example, if tcpwrappers is installed
+in /usr/local, you might have
+
+USE_TCP_WRAPPERS=yes
+CFLAGS=-O -I/usr/local/include
+EXTRALIBS_EXIM=-L/usr/local/lib -lwrap
+
+in Local/Makefile. The daemon name to use in the tcpwrappers control files is
+"exim". For example, the line
+
+exim : LOCAL  192.168.1.  .friendly.domain.example
+
+in your /etc/hosts.allow file allows connections from the local host, from the
+subnet 192.168.1.0/24, and from all hosts in friendly.domain.example. All other
+connections are denied. The daemon name used by tcpwrappers can be changed at
+build time by setting TCP_WRAPPERS_DAEMON_NAME in Local/Makefile, or by setting
+tcp_wrappers_daemon_name in the configure file. Consult the tcpwrappers
+documentation for further details.
+
+
+4.9 Including support for IPv6
+------------------------------
+
+Exim contains code for use on systems that have IPv6 support. Setting
+"HAVE_IPV6=YES" in Local/Makefile causes the IPv6 code to be included; it may
+also be necessary to set IPV6_INCLUDE and IPV6_LIBS on systems where the IPv6
+support is not fully integrated into the normal include and library files.
+
+Two different types of DNS record for handling IPv6 addresses have been
+defined. AAAA records (analogous to A records for IPv4) are in use, and are
+currently seen as the mainstream. Another record type called A6 was proposed as
+better than AAAA because it had more flexibility. However, it was felt to be
+over-complex, and its status was reduced to "experimental". Exim used to have a
+compile option for including A6 record support but this has now been withdrawn.
+
+
+4.10 Dynamically loaded lookup module support
+---------------------------------------------
+
+On some platforms, Exim supports not compiling all lookup types directly into
+the main binary, instead putting some into external modules which can be loaded
+on demand. This permits packagers to build Exim with support for lookups with
+extensive library dependencies without requiring all users to install all of
+those dependencies. Most, but not all, lookup types can be built this way.
+
+Set "LOOKUP_MODULE_DIR" to the directory into which the modules will be
+installed; Exim will only load modules from that directory, as a security
+measure. You will need to set "CFLAGS_DYNAMIC" if not already defined for your
+OS; see OS/Makefile-Linux for an example. Some other requirements for adjusting
+"EXTRALIBS" may also be necessary, see src/EDITME for details.
+
+Then, for each module to be loaded dynamically, define the relevant "LOOKUP_"<
+lookup_type> flags to have the value "2" instead of "yes". For example, this
+will build in lsearch but load sqlite and mysql support on demand:
+
+LOOKUP_LSEARCH=yes
+LOOKUP_SQLITE=2
+LOOKUP_MYSQL=2
+
+
+4.11 The building process
+-------------------------
+
+Once Local/Makefile (and Local/eximon.conf, if required) have been created, run
+make at the top level. It determines the architecture and operating system
+types, and creates a build directory if one does not exist. For example, on a
+Sun system running Solaris 8, the directory build-SunOS5-5.8-sparc is created. 
+Symbolic links to relevant source files are installed in the build directory.
+
+If this is the first time make has been run, it calls a script that builds a
+make file inside the build directory, using the configuration files from the
+Local directory. The new make file is then passed to another instance of make.
+This does the real work, building a number of utility scripts, and then
+compiling and linking the binaries for the Exim monitor (if configured), a
+number of utility programs, and finally Exim itself. The command "make
+makefile" can be used to force a rebuild of the make file in the build
+directory, should this ever be necessary.
+
+If you have problems building Exim, check for any comments there may be in the
+README file concerning your operating system, and also take a look at the FAQ,
+where some common problems are covered.
+
+
+4.12 Output from "make"
+-----------------------
+
+The output produced by the make process for compile lines is often very
+unreadable, because these lines can be very long. For this reason, the normal
+output is suppressed by default, and instead output similar to that which
+appears when compiling the 2.6 Linux kernel is generated: just a short line for
+each module that is being compiled or linked. However, it is still possible to
+get the full output, by calling make like this:
+
+FULLECHO='' make -e
+
+The value of FULLECHO defaults to "@", the flag character that suppresses
+command reflection in make. When you ask for the full output, it is given in
+addition to the short output.
+
+
+4.13 Overriding build-time options for Exim
+-------------------------------------------
+
+The main make file that is created at the beginning of the building process
+consists of the concatenation of a number of files which set configuration
+values, followed by a fixed set of make instructions. If a value is set more
+than once, the last setting overrides any previous ones. This provides a
+convenient way of overriding defaults. The files that are concatenated are, in
+order:
+
+OS/Makefile-Default
+OS/Makefile-<ostype>
+Local/Makefile
+Local/Makefile-<ostype>
+Local/Makefile-<archtype>
+Local/Makefile-<ostype>-<archtype>
+OS/Makefile-Base
+
+where <ostype> is the operating system type and <archtype> is the architecture
+type. Local/Makefile is required to exist, and the building process fails if it
+is absent. The other three Local files are optional, and are often not needed.
+
+The values used for <ostype> and <archtype> are obtained from scripts called
+scripts/os-type and scripts/arch-type respectively. If either of the
+environment variables EXIM_OSTYPE or EXIM_ARCHTYPE is set, their values are
+used, thereby providing a means of forcing particular settings. Otherwise, the
+scripts try to get values from the uname command. If this fails, the shell
+variables OSTYPE and ARCHTYPE are inspected. A number of ad hoc transformations
+are then applied, to produce the standard names that Exim expects. You can run
+these scripts directly from the shell in order to find out what values are
+being used on your system.
+
+OS/Makefile-Default contains comments about the variables that are set therein.
+Some (but not all) are mentioned below. If there is something that needs
+changing, review the contents of this file and the contents of the make file
+for your operating system (OS/Makefile-<ostype>) to see what the default values
+are.
+
+If you need to change any of the values that are set in OS/Makefile-Default or
+in OS/Makefile-<ostype>, or to add any new definitions, you do not need to
+change the original files. Instead, you should make the changes by putting the
+new values in an appropriate Local file. For example, when building Exim in
+many releases of the Tru64-Unix (formerly Digital UNIX, formerly DEC-OSF1)
+operating system, it is necessary to specify that the C compiler is called cc
+rather than gcc. Also, the compiler must be called with the option -std1, to
+make it recognize some of the features of Standard C that Exim uses. (Most
+other compilers recognize Standard C by default.) To do this, you should create
+a file called Local/Makefile-OSF1 containing the lines
+
+CC=cc
+CFLAGS=-std1
+
+If you are compiling for just one operating system, it may be easier to put
+these lines directly into Local/Makefile.
+
+Keeping all your local configuration settings separate from the distributed
+files makes it easy to transfer them to new versions of Exim simply by copying
+the contents of the Local directory.
+
+Exim contains support for doing LDAP, NIS, NIS+, and other kinds of file
+lookup, but not all systems have these components installed, so the default is
+not to include the relevant code in the binary. All the different kinds of file
+and database lookup that Exim supports are implemented as separate code modules
+which are included only if the relevant compile-time options are set. In the
+case of LDAP, NIS, and NIS+, the settings for Local/Makefile are:
+
+LOOKUP_LDAP=yes
+LOOKUP_NIS=yes
+LOOKUP_NISPLUS=yes
+
+and similar settings apply to the other lookup types. They are all listed in
+src/EDITME. In many cases the relevant include files and interface libraries
+need to be installed before compiling Exim. However, there are some optional
+lookup types (such as cdb) for which the code is entirely contained within
+Exim, and no external include files or libraries are required. When a lookup
+type is not included in the binary, attempts to configure Exim to use it cause
+runtime configuration errors.
+
+Many systems now use a tool called pkg-config to encapsulate information about
+how to compile against a library; Exim has some initial support for being able
+to use pkg-config for lookups and authenticators. For any given makefile
+variable which starts "LOOKUP_" or "AUTH_", you can add a new variable with the
+"_PC" suffix in the name and assign as the value the name of the package to be
+queried. The results of querying via the pkg-config command will be added to
+the appropriate Makefile variables with "+=" directives, so your version of 
+make will need to support that syntax. For instance:
+
+LOOKUP_SQLITE=yes
+LOOKUP_SQLITE_PC=sqlite3
+AUTH_GSASL=yes
+AUTH_GSASL_PC=libgsasl
+AUTH_HEIMDAL_GSSAPI=yes
+AUTH_HEIMDAL_GSSAPI_PC=heimdal-gssapi
+
+Exim can be linked with an embedded Perl interpreter, allowing Perl subroutines
+to be called during string expansion. To enable this facility,
+
+EXIM_PERL=perl.o
+
+must be defined in Local/Makefile. Details of this facility are given in
+chapter 12.
+
+The location of the X11 libraries is something that varies a lot between
+operating systems, and there may be different versions of X11 to cope with.
+Exim itself makes no use of X11, but if you are compiling the Exim monitor, the
+X11 libraries must be available. The following three variables are set in OS/
+Makefile-Default:
+
+X11=/usr/X11R6
+XINCLUDE=-I$(X11)/include
+XLFLAGS=-L$(X11)/lib
+
+These are overridden in some of the operating-system configuration files. For
+example, in OS/Makefile-SunOS5 there is
+
+X11=/usr/openwin
+XINCLUDE=-I$(X11)/include
+XLFLAGS=-L$(X11)/lib -R$(X11)/lib
+
+If you need to override the default setting for your operating system, place a
+definition of all three of these variables into your Local/Makefile-<ostype>
+file.
+
+If you need to add any extra libraries to the link steps, these can be put in a
+variable called EXTRALIBS, which appears in all the link commands, but by
+default is not defined. In contrast, EXTRALIBS_EXIM is used only on the command
+for linking the main Exim binary, and not for any associated utilities.
+
+There is also DBMLIB, which appears in the link commands for binaries that use
+DBM functions (see also section 4.4). Finally, there is EXTRALIBS_EXIMON, which
+appears only in the link step for the Exim monitor binary, and which can be
+used, for example, to include additional X11 libraries.
+
+The make file copes with rebuilding Exim correctly if any of the configuration
+files are edited. However, if an optional configuration file is deleted, it is
+necessary to touch the associated non-optional file (that is, Local/Makefile or
+Local/eximon.conf) before rebuilding.
+
+
+4.14 OS-specific header files
+-----------------------------
+
+The OS directory contains a number of files with names of the form os.h-
+<ostype>. These are system-specific C header files that should not normally
+need to be changed. There is a list of macro settings that are recognized in
+the file OS/os.configuring, which should be consulted if you are porting Exim
+to a new operating system.
+
+
+4.15 Overriding build-time options for the monitor
+--------------------------------------------------
+
+A similar process is used for overriding things when building the Exim monitor,
+where the files that are involved are
+
+OS/eximon.conf-Default
+OS/eximon.conf-<ostype>
+Local/eximon.conf
+Local/eximon.conf-<ostype>
+Local/eximon.conf-<archtype>
+Local/eximon.conf-<ostype>-<archtype>
+
+As with Exim itself, the final three files need not exist, and in this case the
+OS/eximon.conf-<ostype> file is also optional. The default values in OS/
+eximon.conf-Default can be overridden dynamically by setting environment
+variables of the same name, preceded by EXIMON_. For example, setting
+EXIMON_LOG_DEPTH in the environment overrides the value of LOG_DEPTH at
+runtime.
+
+
+4.16 Installing Exim binaries and scripts
+-----------------------------------------
+
+The command "make install" runs the exim_install script with no arguments. The
+script copies binaries and utility scripts into the directory whose name is
+specified by the BIN_DIRECTORY setting in Local/Makefile. The install script
+copies files only if they are newer than the files they are going to replace.
+The Exim binary is required to be owned by root and have the setuid bit set,
+for normal configurations. Therefore, you must run "make install" as root so
+that it can set up the Exim binary in this way. However, in some special
+situations (for example, if a host is doing no local deliveries) it may be
+possible to run Exim without making the binary setuid root (see chapter 56 for
+details).
+
+Exim's runtime configuration file is named by the CONFIGURE_FILE setting in
+Local/Makefile. If this names a single file, and the file does not exist, the
+default configuration file src/configure.default is copied there by the
+installation script. If a runtime configuration file already exists, it is left
+alone. If CONFIGURE_FILE is a colon-separated list, naming several alternative
+files, no default is installed.
+
+One change is made to the default configuration file when it is installed: the
+default configuration contains a router that references a system aliases file.
+The path to this file is set to the value specified by SYSTEM_ALIASES_FILE in
+Local/Makefile (/etc/aliases by default). If the system aliases file does not
+exist, the installation script creates it, and outputs a comment to the user.
+
+The created file contains no aliases, but it does contain comments about the
+aliases a site should normally have. Mail aliases have traditionally been kept
+in /etc/aliases. However, some operating systems are now using /etc/mail/
+aliases. You should check if yours is one of these, and change Exim's
+configuration if necessary.
+
+The default configuration uses the local host's name as the only local domain,
+and is set up to do local deliveries into the shared directory /var/mail,
+running as the local user. System aliases and .forward files in users' home
+directories are supported, but no NIS or NIS+ support is configured. Domains
+other than the name of the local host are routed using the DNS, with delivery
+over SMTP.
+
+It is possible to install Exim for special purposes (such as building a binary
+distribution) in a private part of the file system. You can do this by a
+command such as
+
+make DESTDIR=/some/directory/ install
+
+This has the effect of pre-pending the specified directory to all the file
+paths, except the name of the system aliases file that appears in the default
+configuration. (If a default alias file is created, its name is modified.) For
+backwards compatibility, ROOT is used if DESTDIR is not set, but this usage is
+deprecated.
+
+Running make install does not copy the Exim 4 conversion script convert4r4. You
+will probably run this only once if you are upgrading from Exim 3. None of the
+documentation files in the doc directory are copied, except for the info files
+when you have set INFO_DIRECTORY, as described in section 4.17 below.
+
+For the utility programs, old versions are renamed by adding the suffix .O to
+their names. The Exim binary itself, however, is handled differently. It is
+installed under a name that includes the version number and the compile number,
+for example, exim-4.96-1. The script then arranges for a symbolic link called
+exim to point to the binary. If you are updating a previous version of Exim,
+the script takes care to ensure that the name exim is never absent from the
+directory (as seen by other processes).
+
+If you want to see what the make install will do before running it for real,
+you can pass the -n option to the installation script by this command:
+
+make INSTALL_ARG=-n install
+
+The contents of the variable INSTALL_ARG are passed to the installation script.
+You do not need to be root to run this test. Alternatively, you can run the
+installation script directly, but this must be from within the build directory.
+For example, from the top-level Exim directory you could use this command:
+
+(cd build-SunOS5-5.5.1-sparc; ../scripts/exim_install -n)
+
+There are two other options that can be supplied to the installation script.
+
+  * -no_chown bypasses the call to change the owner of the installed binary to
+    root, and the call to make it a setuid binary.
+
+  * -no_symlink bypasses the setting up of the symbolic link exim to the
+    installed binary.
+
+INSTALL_ARG can be used to pass these options to the script. For example:
+
+make INSTALL_ARG=-no_symlink install
+
+The installation script can also be given arguments specifying which files are
+to be copied. For example, to install just the Exim binary, and nothing else,
+without creating the symbolic link, you could use:
+
+make INSTALL_ARG='-no_symlink exim' install
+
+
+4.17 Installing info documentation
+----------------------------------
+
+Not all systems use the GNU info system for documentation, and for this reason,
+the Texinfo source of Exim's documentation is not included in the main
+distribution. Instead it is available separately from the FTP site (see section
+1.5).
+
+If you have defined INFO_DIRECTORY in Local/Makefile and the Texinfo source of
+the documentation is found in the source tree, running "make install"
+automatically builds the info files and installs them.
+
+
+4.18 Setting up the spool directory
+-----------------------------------
+
+When it starts up, Exim tries to create its spool directory if it does not
+exist. The Exim uid and gid are used for the owner and group of the spool
+directory. Sub-directories are automatically created in the spool directory as
+necessary.
+
+
+4.19 Testing
+------------
+
+Having installed Exim, you can check that the runtime configuration file is
+syntactically valid by running the following command, which assumes that the
+Exim binary directory is within your PATH environment variable:
+
+exim -bV
+
+If there are any errors in the configuration file, Exim outputs error messages.
+Otherwise it outputs the version number and build date, the DBM library that is
+being used, and information about which drivers and other optional code modules
+are included in the binary. Some simple routing tests can be done by using the
+address testing option. For example,
+
+exim -bt <local username>
+
+should verify that it recognizes a local mailbox, and
+
+exim -bt <remote address>
+
+a remote one. Then try getting it to deliver mail, both locally and remotely.
+This can be done by passing messages directly to Exim, without going through a
+user agent. For example:
+
+exim -v postmaster@your.domain.example
+From: user@your.domain.example
+To: postmaster@your.domain.example
+Subject: Testing Exim
+
+This is a test message.
+^D
+
+The -v option causes Exim to output some verification of what it is doing. In
+this case you should see copies of three log lines, one for the message's
+arrival, one for its delivery, and one containing "Completed".
+
+If you encounter problems, look at Exim's log files (mainlog and paniclog) to
+see if there is any relevant information there. Another source of information
+is running Exim with debugging turned on, by specifying the -d option. If a
+message is stuck on Exim's spool, you can force a delivery with debugging
+turned on by a command of the form
+
+exim -d -M <exim-message-id>
+
+You must be root or an "admin user" in order to do this. The -d option produces
+rather a lot of output, but you can cut this down to specific areas. For
+example, if you use -d-all+route only the debugging information relevant to
+routing is included. (See the -d option in chapter 5 for more details.)
+
+One specific problem that has shown up on some sites is the inability to do
+local deliveries into a shared mailbox directory, because it does not have the
+"sticky bit" set on it. By default, Exim tries to create a lock file before
+writing to a mailbox file, and if it cannot create the lock file, the delivery
+is deferred. You can get round this either by setting the "sticky bit" on the
+directory, or by setting a specific group for local deliveries and allowing
+that group to create files in the directory (see the comments above the 
+local_delivery transport in the default configuration file). Another approach
+is to configure Exim not to use lock files, but just to rely on fcntl() locking
+instead. However, you should do this only if all user agents also use fcntl()
+locking. For further discussion of locking issues, see chapter 26.
+
+One thing that cannot be tested on a system that is already running an MTA is
+the receipt of incoming SMTP mail on the standard SMTP port. However, the -oX
+option can be used to run an Exim daemon that listens on some other port, or 
+inetd can be used to do this. The -bh option and the exim_checkaccess utility
+can be used to check out policy controls on incoming SMTP mail.
+
+Testing a new version on a system that is already running Exim can most easily
+be done by building a binary with a different CONFIGURE_FILE setting. From
+within the runtime configuration, all other file and directory names that Exim
+uses can be altered, in order to keep it entirely clear of the production
+version.
+
+
+4.20 Replacing another MTA with Exim
+------------------------------------
+
+Building and installing Exim for the first time does not of itself put it in
+general use. The name by which the system's MTA is called by mail user agents
+is either /usr/sbin/sendmail, or /usr/lib/sendmail (depending on the operating
+system), and it is necessary to make this name point to the exim binary in
+order to get the user agents to pass messages to Exim. This is normally done by
+renaming any existing file and making /usr/sbin/sendmail or /usr/lib/sendmail a
+symbolic link to the exim binary. It is a good idea to remove any setuid
+privilege and executable status from the old MTA. It is then necessary to stop
+and restart the mailer daemon, if one is running.
+
+Some operating systems have introduced alternative ways of switching MTAs. For
+example, if you are running FreeBSD, you need to edit the file /etc/mail/
+mailer.conf instead of setting up a symbolic link as just described. A typical
+example of the contents of this file for running Exim is as follows:
+
+sendmail            /usr/exim/bin/exim
+send-mail           /usr/exim/bin/exim
+mailq               /usr/exim/bin/exim -bp
+newaliases          /usr/bin/true
+
+Once you have set up the symbolic link, or edited /etc/mail/mailer.conf, your
+Exim installation is "live". Check it by sending a message from your favourite
+user agent.
+
+You should consider what to tell your users about the change of MTA. Exim may
+have different capabilities to what was previously running, and there are
+various operational differences such as the text of messages produced by
+command line options and in bounce messages. If you allow your users to make
+use of Exim's filtering capabilities, you should make the document entitled 
+Exim's interface to mail filtering available to them.
+
+
+4.21 Running the daemon
+-----------------------
+
+The most common command line for launching the Exim daemon looks like
+
+exim -bd -q5m
+
+This starts a daemon which
+
+  * listens for incoming smtp connections, launching handler processes for each
+    new one
+
+  * starts a queue-runner process every five minutes, to inspect queued
+    messages and run delivery attempts on any that have arrived at their retry
+    time
+
+Should a queue run take longer than the time between queue-runner starts, they
+will run in parallel. Numbers of jobs of the various types are subject to
+policy controls defined in the configuration.
+
+
+4.22 Upgrading Exim
+-------------------
+
+If you are already running Exim on your host, building and installing a new
+version automatically makes it available to MUAs, or any other programs that
+call the MTA directly. However, if you are running an Exim daemon, you do need 
+to send it a HUP signal, to make it re-execute itself, and thereby pick up the
+new binary. You do not need to stop processing mail in order to install a new
+version of Exim. The install script does not modify an existing runtime
+configuration file.
+
+
+4.23 Stopping the Exim daemon on Solaris
+----------------------------------------
+
+The standard command for stopping the mailer daemon on Solaris is
+
+/etc/init.d/sendmail stop
+
+If /usr/lib/sendmail has been turned into a symbolic link, this script fails to
+stop Exim because it uses the command ps -e and greps the output for the text
+"sendmail"; this is not present because the actual program name (that is,
+"exim") is given by the ps command with these options. A solution is to replace
+the line that finds the process id with something like
+
+pid=`cat /var/spool/exim/exim-daemon.pid`
+
+to obtain the daemon's pid directly from the file that Exim saves it in.
+
+Note, however, that stopping the daemon does not "stop Exim". Messages can
+still be received from local processes, and if automatic delivery is configured
+(the normal case), deliveries will still occur.
+
+
+
+===============================================================================
+5. THE EXIM COMMAND LINE
+
+Exim's command line takes the standard Unix form of a sequence of options, each
+starting with a hyphen character, followed by a number of arguments. The
+options are compatible with the main options of Sendmail, and there are also
+some additional options, some of which are compatible with Smail 3. Certain
+combinations of options do not make sense, and provoke an error if used. The
+form of the arguments depends on which options are set.
+
+
+5.1 Setting options by program name
+-----------------------------------
+
+If Exim is called under the name mailq, it behaves as if the option -bp were
+present before any other options. The -bp option requests a listing of the
+contents of the mail queue on the standard output. This feature is for
+compatibility with some systems that contain a command of that name in one of
+the standard libraries, symbolically linked to /usr/sbin/sendmail or /usr/lib/
+sendmail.
+
+If Exim is called under the name rsmtp it behaves as if the option -bS were
+present before any other options, for compatibility with Smail. The -bS option
+is used for reading in a number of messages in batched SMTP format.
+
+If Exim is called under the name rmail it behaves as if the -i and -oee options
+were present before any other options, for compatibility with Smail. The name 
+rmail is used as an interface by some UUCP systems.
+
+If Exim is called under the name runq it behaves as if the option -q were
+present before any other options, for compatibility with Smail. The -q option
+causes a single queue runner process to be started.
+
+If Exim is called under the name newaliases it behaves as if the option -bi
+were present before any other options, for compatibility with Sendmail. This
+option is used for rebuilding Sendmail's alias file. Exim does not have the
+concept of a single alias file, but can be configured to run a given command if
+called with the -bi option.
+
+
+5.2 Trusted and admin users
+---------------------------
+
+Some Exim options are available only to trusted users and others are available
+only to admin users. In the description below, the phrases "Exim user" and
+"Exim group" mean the user and group defined by EXIM_USER and EXIM_GROUP in
+Local/Makefile or set by the exim_user and exim_group options. These do not
+necessarily have to use the name "exim".
+
+  * The trusted users are root, the Exim user, any user listed in the 
+    trusted_users configuration option, and any user whose current group or any
+    supplementary group is one of those listed in the trusted_groups
+    configuration option. Note that the Exim group is not automatically
+    trusted.
+
+    Trusted users are always permitted to use the -f option or a leading
+    "From " line to specify the envelope sender of a message that is passed to
+    Exim through the local interface (see the -bm and -f options below). See
+    the untrusted_set_sender option for a way of permitting non-trusted users
+    to set envelope senders.
+
+    For a trusted user, there is never any check on the contents of the From:
+    header line, and a Sender: line is never added. Furthermore, any existing 
+    Sender: line in incoming local (non-TCP/IP) messages is not removed.
+
+    Trusted users may also specify a host name, host address, interface
+    address, protocol name, ident value, and authentication data when
+    submitting a message locally. Thus, they are able to insert messages into
+    Exim's queue locally that have the characteristics of messages received
+    from a remote host. Untrusted users may in some circumstances use -f, but
+    can never set the other values that are available to trusted users.
+
+  * The admin users are root, the Exim user, and any user that is a member of
+    the Exim group or of any group listed in the admin_groups configuration
+    option. The current group does not have to be one of these groups.
+
+    Admin users are permitted to list the queue, and to carry out certain
+    operations on messages, for example, to force delivery failures. It is also
+    necessary to be an admin user in order to see the full information provided
+    by the Exim monitor, and full debugging output.
+
+    By default, the use of the -M, -q, -R, and -S options to cause Exim to
+    attempt delivery of messages on its queue is restricted to admin users.
+    However, this restriction can be relaxed by setting the prod_requires_admin
+    option false (that is, specifying no_prod_requires_admin).
+
+    Similarly, the use of the -bp option to list all the messages in the queue
+    is restricted to admin users unless queue_list_requires_admin is set false.
+
+Warning: If you configure your system so that admin users are able to edit
+Exim's configuration file, you are giving those users an easy way of getting
+root. There is further discussion of this issue at the start of chapter 6.
+
+
+5.3 Command line options
+------------------------
+
+Exim's command line options are described in alphabetical order below. If none
+of the options that specifies a specific action (such as starting the daemon or
+a queue runner, or testing an address, or receiving a message in a specific
+format, or listing the queue) are present, and there is at least one argument
+on the command line, -bm (accept a local message on the standard input, with
+the arguments specifying the recipients) is assumed. Otherwise, Exim outputs a
+brief message about itself and exits.
+
+--
+
+    This is a pseudo-option whose only purpose is to terminate the options and
+    therefore to cause subsequent command line items to be treated as arguments
+    rather than options, even if they begin with hyphens.
+
+--help
+
+    This option causes Exim to output a few sentences stating what it is. The
+    same output is generated if the Exim binary is called with no options and
+    no arguments.
+
+--version
+
+    This option is an alias for -bV and causes version information to be
+    displayed.
+
+-Ac, -Am
+
+    These options are used by Sendmail for selecting configuration files and
+    are ignored by Exim.
+
+-B<type>
+
+    This is a Sendmail option for selecting 7 or 8 bit processing. Exim is
+    8-bit clean; it ignores this option.
+
+-bd
+
+    This option runs Exim as a daemon, awaiting incoming SMTP connections.
+    Usually the -bd option is combined with the -q<time> option, to specify
+    that the daemon should also initiate periodic queue runs.
+
+    The -bd option can be used only by an admin user. If either of the -d
+    (debugging) or -v (verifying) options are set, the daemon does not
+    disconnect from the controlling terminal. When running this way, it can be
+    stopped by pressing ctrl-C.
+
+    By default, Exim listens for incoming connections to the standard SMTP port
+    on all the host's running interfaces. However, it is possible to listen on
+    other ports, on multiple ports, and only on specific interfaces. Chapter 13
+    contains a description of the options that control this.
+
+    When a listening daemon is started without the use of -oX (that is, without
+    overriding the normal configuration), it writes its process id to a file
+    called exim-daemon.pid in Exim's spool directory. This location can be
+    overridden by setting PID_FILE_PATH in Local/Makefile. The file is written
+    while Exim is still running as root.
+
+    When -oX is used on the command line to start a listening daemon, the
+    process id is not written to the normal pid file path. However, -oP can be
+    used to specify a path on the command line if a pid file is required.
+
+    The SIGHUP signal can be used to cause the daemon to re-execute itself.
+    This should be done whenever Exim's configuration file, or any file that is
+    incorporated into it by means of the .include facility, is changed, and
+    also whenever a new version of Exim is installed. It is not necessary to do
+    this when other files that are referenced from the configuration (for
+    example, alias files) are changed, because these are reread each time they
+    are used.
+
+-bdf
+
+    This option has the same effect as -bd except that it never disconnects
+    from the controlling terminal, even when no debugging is specified.
+
+-be
+
+    Run Exim in expansion testing mode. Exim discards its root privilege, to
+    prevent ordinary users from using this mode to read otherwise inaccessible
+    files. If no arguments are given, Exim runs interactively, prompting for
+    lines of data. Otherwise, it processes each argument in turn.
+
+    If Exim was built with USE_READLINE=yes in Local/Makefile, it tries to load
+    the libreadline library dynamically whenever the -be option is used without
+    command line arguments. If successful, it uses the readline() function,
+    which provides extensive line-editing facilities, for reading the test
+    data. A line history is supported.
+
+    Long expansion expressions can be split over several lines by using
+    backslash continuations. As in Exim's runtime configuration, white space at
+    the start of continuation lines is ignored. Each argument or data line is
+    passed through the string expansion mechanism, and the result is output.
+    Variable values from the configuration file (for example, $qualify_domain)
+    are available, but no message-specific values (such as $message_exim_id)
+    are set, because no message is being processed (but see -bem and -Mset).
+
+    Note: If you use this mechanism to test lookups, and you change the data
+    files or databases you are using, you must exit and restart Exim before
+    trying the same lookup again. Otherwise, because each Exim process caches
+    the results of lookups, you will just get the same result as before.
+
+    Macro processing is done on lines before string-expansion: new macros can
+    be defined and macros will be expanded. Because macros in the config file
+    are often used for secrets, those are only available to admin users.
+
+-bem <filename>
+
+    This option operates like -be except that it must be followed by the name
+    of a file. For example:
+
+    exim -bem /tmp/testmessage
+
+    The file is read as a message (as if receiving a locally-submitted non-SMTP
+    message) before any of the test expansions are done. Thus, message-specific
+    variables such as $message_size and $header_from: are available. However,
+    no Received: header is added to the message. If the -t option is set,
+    recipients are read from the headers in the normal way, and are shown in
+    the $recipients variable. Note that recipients cannot be given on the
+    command line, because further arguments are taken as strings to expand
+    (just like -be).
+
+-bF <filename>
+
+    This option is the same as -bf except that it assumes that the filter being
+    tested is a system filter. The additional commands that are available only
+    in system filters are recognized.
+
+-bf <filename>
+
+    This option runs Exim in user filter testing mode; the file is the filter
+    file to be tested, and a test message must be supplied on the standard
+    input. If there are no message-dependent tests in the filter, an empty file
+    can be supplied.
+
+    If you want to test a system filter file, use -bF instead of -bf. You can
+    use both -bF and -bf on the same command, in order to test a system filter
+    and a user filter in the same run. For example:
+
+    exim -bF /system/filter -bf /user/filter </test/message
+
+    This is helpful when the system filter adds header lines or sets filter
+    variables that are used by the user filter.
+
+    If the test filter file does not begin with one of the special lines
+
+    # Exim filter
+    # Sieve filter
+
+    it is taken to be a normal .forward file, and is tested for validity under
+    that interpretation. See sections 22.4 to 22.6 for a description of the
+    possible contents of non-filter redirection lists.
+
+    The result of an Exim command that uses -bf, provided no errors are
+    detected, is a list of the actions that Exim would try to take if presented
+    with the message for real. More details of filter testing are given in the
+    separate document entitled Exim's interfaces to mail filtering.
+
+    When testing a filter file, the envelope sender can be set by the -f
+    option, or by a "From " line at the start of the test message. Various
+    parameters that would normally be taken from the envelope recipient address
+    of the message can be set by means of additional command line options (see
+    the next four options).
+
+-bfd <domain>
+
+    This sets the domain of the recipient address when a filter file is being
+    tested by means of the -bf option. The default is the value of
+    $qualify_domain.
+
+-bfl <local part>
+
+    This sets the local part of the recipient address when a filter file is
+    being tested by means of the -bf option. The default is the username of the
+    process that calls Exim. A local part should be specified with any prefix
+    or suffix stripped, because that is how it appears to the filter when a
+    message is actually being delivered.
+
+-bfp <prefix>
+
+    This sets the prefix of the local part of the recipient address when a
+    filter file is being tested by means of the -bf option. The default is an
+    empty prefix.
+
+-bfs <suffix>
+
+    This sets the suffix of the local part of the recipient address when a
+    filter file is being tested by means of the -bf option. The default is an
+    empty suffix.
+
+-bh <IP address>
+
+    This option runs a fake SMTP session as if from the given IP address, using
+    the standard input and output. The IP address may include a port number at
+    the end, after a full stop. For example:
+
+    exim -bh 10.9.8.7.1234
+    exim -bh fe80::a00:20ff:fe86:a061.5678
+
+    When an IPv6 address is given, it is converted into canonical form. In the
+    case of the second example above, the value of $sender_host_address after
+    conversion to the canonical form is
+    "fe80:0000:0000:0a00:20ff:fe86:a061.5678".
+
+    Comments as to what is going on are written to the standard error file.
+    These include lines beginning with "LOG" for anything that would have been
+    logged. This facility is provided for testing configuration options for
+    incoming messages, to make sure they implement the required policy. For
+    example, you can test your relay controls using -bh.
+
+    Warning 1: You can test features of the configuration that rely on ident
+    (RFC 1413) information by using the -oMt option. However, Exim cannot
+    actually perform an ident callout when testing using -bh because there is
+    no incoming SMTP connection.
+
+    Warning 2: Address verification callouts (see section 44.46) are also
+    skipped when testing using -bh. If you want these callouts to occur, use 
+    -bhc instead.
+
+    Messages supplied during the testing session are discarded, and nothing is
+    written to any of the real log files. There may be pauses when DNS (and
+    other) lookups are taking place, and of course these may time out. The -oMi
+    option can be used to specify a specific IP interface and port if this is
+    important, and -oMaa and -oMai can be used to set parameters as if the SMTP
+    session were authenticated.
+
+    The exim_checkaccess utility is a "packaged" version of -bh whose output
+    just states whether a given recipient address from a given host is
+    acceptable or not. See section 54.8.
+
+    Features such as authentication and encryption, where the client input is
+    not plain text, cannot easily be tested with -bh. Instead, you should use a
+    specialized SMTP test program such as swaks.
+
+-bhc <IP address>
+
+    This option operates in the same way as -bh, except that address
+    verification callouts are performed if required. This includes consulting
+    and updating the callout cache database.
+
+-bi
+
+    Sendmail interprets the -bi option as a request to rebuild its alias file.
+    Exim does not have the concept of a single alias file, and so it cannot
+    mimic this behaviour. However, calls to /usr/lib/sendmail with the -bi
+    option tend to appear in various scripts such as NIS make files, so the
+    option must be recognized.
+
+    If -bi is encountered, the command specified by the bi_command
+    configuration option is run, under the uid and gid of the caller of Exim.
+    If the -oA option is used, its value is passed to the command as an
+    argument. The command set by bi_command may not contain arguments. The
+    command can use the exim_dbmbuild utility, or some other means, to rebuild
+    alias files if this is required. If the bi_command option is not set,
+    calling Exim with -bi is a no-op.
+
+-bI:help
+
+    We shall provide various options starting "-bI:" for querying Exim for
+    information. The output of many of these will be intended for machine
+    consumption. This one is not. The -bI:help option asks Exim for a synopsis
+    of supported options beginning "-bI:". Use of any of these options shall
+    cause Exim to exit after producing the requested output.
+
+-bI:dscp
+
+    This option causes Exim to emit an alphabetically sorted list of all
+    recognised DSCP names.
+
+-bI:sieve
+
+    This option causes Exim to emit an alphabetically sorted list of all
+    supported Sieve protocol extensions on stdout, one per line. This is
+    anticipated to be useful for ManageSieve (RFC 5804) implementations, in
+    providing that protocol's "SIEVE" capability response line. As the precise
+    list may depend upon compile-time build options, which this option will
+    adapt to, this is the only way to guarantee a correct response.
+
+-bm
+
+    This option runs an Exim receiving process that accepts an incoming,
+    locally-generated message on the standard input. The recipients are given
+    as the command arguments (except when -t is also present - see below). Each
+    argument can be a comma-separated list of RFC 2822 addresses. This is the
+    default option for selecting the overall action of an Exim call; it is
+    assumed if no other conflicting option is present.
+
+    If any addresses in the message are unqualified (have no domain), they are
+    qualified by the values of the qualify_domain or qualify_recipient options,
+    as appropriate. The -bnq option (see below) provides a way of suppressing
+    this for special cases.
+
+    Policy checks on the contents of local messages can be enforced by means of
+    the non-SMTP ACL. See chapter 44 for details.
+
+    The return code is zero if the message is successfully accepted. Otherwise,
+    the action is controlled by the -oex option setting - see below.
+
+    The format of the message must be as defined in RFC 2822, except that, for
+    compatibility with Sendmail and Smail, a line in one of the forms
+
+    From sender Fri Jan  5 12:55 GMT 1997
+    From sender Fri, 5 Jan 97 12:55:01
+
+    (with the weekday optional, and possibly with additional text after the
+    date) is permitted to appear at the start of the message. There appears to
+    be no authoritative specification of the format of this line. Exim
+    recognizes it by matching against the regular expression defined by the 
+    uucp_from_pattern option, which can be changed if necessary.
+
+    The specified sender is treated as if it were given as the argument to the 
+    -f option, but if a -f option is also present, its argument is used in
+    preference to the address taken from the message. The caller of Exim must
+    be a trusted user for the sender of a message to be set in this way.
+
+-bmalware <filename>
+
+    This debugging option causes Exim to scan the given file or directory
+    (depending on the used scanner interface), using the malware scanning
+    framework. The option of av_scanner influences this option, so if 
+    av_scanner's value is dependent upon an expansion then the expansion should
+    have defaults which apply to this invocation. ACLs are not invoked, so if 
+    av_scanner references an ACL variable then that variable will never be
+    populated and -bmalware will fail.
+
+    Exim will have changed working directory before resolving the filename, so
+    using fully qualified pathnames is advisable. Exim will be running as the
+    Exim user when it tries to open the file, rather than as the invoking user.
+    This option requires admin privileges.
+
+    The -bmalware option will not be extended to be more generally useful,
+    there are better tools for file-scanning. This option exists to help
+    administrators verify their Exim and AV scanner configuration.
+
+-bnq
+
+    By default, Exim automatically qualifies unqualified addresses (those
+    without domains) that appear in messages that are submitted locally (that
+    is, not over TCP/IP). This qualification applies both to addresses in
+    envelopes, and addresses in header lines. Sender addresses are qualified
+    using qualify_domain, and recipient addresses using qualify_recipient
+    (which defaults to the value of qualify_domain).
+
+    Sometimes, qualification is not wanted. For example, if -bS (batch SMTP) is
+    being used to re-submit messages that originally came from remote hosts
+    after content scanning, you probably do not want to qualify unqualified
+    addresses in header lines. (Such lines will be present only if you have not
+    enabled a header syntax check in the appropriate ACL.)
+
+    The -bnq option suppresses all qualification of unqualified addresses in
+    messages that originate on the local host. When this is used, unqualified
+    addresses in the envelope provoke errors (causing message rejection) and
+    unqualified addresses in header lines are left alone.
+
+-bP
+
+    If this option is given with no arguments, it causes the values of all
+    Exim's main configuration options to be written to the standard output. The
+    values of one or more specific options can be requested by giving their
+    names as arguments, for example:
+
+    exim -bP qualify_domain hold_domains
+
+    However, any option setting that is preceded by the word "hide" in the
+    configuration file is not shown in full, except to an admin user. For other
+    users, the output is as in this example:
+
+    mysql_servers = <value not displayable>
+
+    If config is given as an argument, the config is output, as it was parsed,
+    any include file resolved, any comment removed.
+
+    If config_file is given as an argument, the name of the runtime
+    configuration file is output. (configure_file works too, for backward
+    compatibility.) If a list of configuration files was supplied, the value
+    that is output here is the name of the file that was actually used.
+
+    If the -n flag is given, then for most modes of -bP operation the name will
+    not be output.
+
+    If log_file_path or pid_file_path are given, the names of the directories
+    where log files and daemon pid files are written are output, respectively.
+    If these values are unset, log files are written in a sub-directory of the
+    spool directory called log, and the pid file is written directly into the
+    spool directory.
+
+    If -bP is followed by a name preceded by "+", for example,
+
+    exim -bP +local_domains
+
+    it searches for a matching named list of any type (domain, host, address,
+    or local part) and outputs what it finds.
+
+    If one of the words router, transport, or authenticator is given, followed
+    by the name of an appropriate driver instance, the option settings for that
+    driver are output. For example:
+
+    exim -bP transport local_delivery
+
+    The generic driver options are output first, followed by the driver's
+    private options. A list of the names of drivers of a particular type can be
+    obtained by using one of the words router_list, transport_list, or 
+    authenticator_list, and a complete list of all drivers with their option
+    settings can be obtained by using routers, transports, or authenticators.
+
+    If environment is given as an argument, the set of environment variables is
+    output, line by line. Using the -n flag suppresses the value of the
+    variables.
+
+    If invoked by an admin user, then macro, macro_list and macros are
+    available, similarly to the drivers. Because macros are sometimes used for
+    storing passwords, this option is restricted. The output format is one item
+    per line. For the "-bP macro <name>" form, if no such macro is found the
+    exit status will be nonzero.
+
+-bp
+
+    This option requests a listing of the contents of the mail queue on the
+    standard output. If the -bp option is followed by a list of message ids,
+    just those messages are listed. By default, this option can be used only by
+    an admin user. However, the queue_list_requires_admin option can be set
+    false to allow any user to see the queue.
+
+    Each message in the queue is displayed as in the following example:
+
+    25m  2.9K 0t5C6f-0000c8-00 <alice@wonderland.fict.example>
+              red.king@looking-glass.fict.example
+              <other addresses>
+
+    The first line contains the length of time the message has been in the
+    queue (in this case 25 minutes), the size of the message (2.9K), the unique
+    local identifier for the message, and the message sender, as contained in
+    the envelope. For bounce messages, the sender address is empty, and appears
+    as "<>". If the message was submitted locally by an untrusted user who
+    overrode the default sender address, the user's login name is shown in
+    parentheses before the sender address.
+
+    If the message is frozen (attempts to deliver it are suspended) then the
+    text "*** frozen ***" is displayed at the end of this line.
+
+    The recipients of the message (taken from the envelope, not the headers)
+    are displayed on subsequent lines. Those addresses to which the message has
+    already been delivered are marked with the letter D. If an original address
+    gets expanded into several addresses via an alias or forward file, the
+    original is displayed with a D only when deliveries for all of its child
+    addresses are complete.
+
+-bpa
+
+    This option operates like -bp, but in addition it shows delivered addresses
+    that were generated from the original top level address(es) in each message
+    by alias or forwarding operations. These addresses are flagged with "+D"
+    instead of just "D".
+
+-bpc
+
+    This option counts the number of messages in the queue, and writes the
+    total to the standard output. It is restricted to admin users, unless 
+    queue_list_requires_admin is set false.
+
+-bpr
+
+    This option operates like -bp, but the output is not sorted into
+    chronological order of message arrival. This can speed it up when there are
+    lots of messages in the queue, and is particularly useful if the output is
+    going to be post-processed in a way that doesn't need the sorting.
+
+-bpra
+
+    This option is a combination of -bpr and -bpa.
+
+-bpru
+
+    This option is a combination of -bpr and -bpu.
+
+-bpu
+
+    This option operates like -bp but shows only undelivered top-level
+    addresses for each message displayed. Addresses generated by aliasing or
+    forwarding are not shown, unless the message was deferred after processing
+    by a router with the one_time option set.
+
+-brt
+
+    This option is for testing retry rules, and it must be followed by up to
+    three arguments. It causes Exim to look for a retry rule that matches the
+    values and to write it to the standard output. For example:
+
+    exim -brt bach.comp.mus.example
+    Retry rule: *.comp.mus.example  F,2h,15m; F,4d,30m;
+
+    See chapter 32 for a description of Exim's retry rules. The first argument,
+    which is required, can be a complete address in the form local_part@domain,
+    or it can be just a domain name. If the second argument contains a dot, it
+    is interpreted as an optional second domain name; if no retry rule is found
+    for the first argument, the second is tried. This ties in with Exim's
+    behaviour when looking for retry rules for remote hosts - if no rule is
+    found that matches the host, one that matches the mail domain is sought.
+    Finally, an argument that is the name of a specific delivery error, as used
+    in setting up retry rules, can be given. For example:
+
+    exim -brt haydn.comp.mus.example quota_3d
+    Retry rule: *@haydn.comp.mus.example quota_3d  F,1h,15m
+
+-brw
+
+    This option is for testing address rewriting rules, and it must be followed
+    by a single argument, consisting of either a local part without a domain,
+    or a complete address with a fully qualified domain. Exim outputs how this
+    address would be rewritten for each possible place it might appear. See
+    chapter 31 for further details.
+
+-bS
+
+    This option is used for batched SMTP input, which is an alternative
+    interface for non-interactive local message submission. A number of
+    messages can be submitted in a single run. However, despite its name, this
+    is not really SMTP input. Exim reads each message's envelope from SMTP
+    commands on the standard input, but generates no responses. If the caller
+    is trusted, or untrusted_set_sender is set, the senders in the SMTP MAIL
+    commands are believed; otherwise the sender is always the caller of Exim.
+
+    The message itself is read from the standard input, in SMTP format (leading
+    dots doubled), terminated by a line containing just a single dot. An error
+    is provoked if the terminating dot is missing. A further message may then
+    follow.
+
+    As for other local message submissions, the contents of incoming batch SMTP
+    messages can be checked using the non-SMTP ACL (see chapter 44).
+    Unqualified addresses are automatically qualified using qualify_domain and 
+    qualify_recipient, as appropriate, unless the -bnq option is used.
+
+    Some other SMTP commands are recognized in the input. HELO and EHLO act as
+    RSET; VRFY, EXPN, ETRN, and HELP act as NOOP; QUIT quits, ignoring the rest
+    of the standard input.
+
+    If any error is encountered, reports are written to the standard output and
+    error streams, and Exim gives up immediately. The return code is 0 if no
+    error was detected; it is 1 if one or more messages were accepted before
+    the error was detected; otherwise it is 2.
+
+    More details of input using batched SMTP are given in section 49.11.
+
+-bs
+
+    This option causes Exim to accept one or more messages by reading SMTP
+    commands on the standard input, and producing SMTP replies on the standard
+    output. SMTP policy controls, as defined in ACLs (see chapter 44) are
+    applied. Some user agents use this interface as a way of passing
+    locally-generated messages to the MTA.
+
+    In this usage, if the caller of Exim is trusted, or untrusted_set_sender is
+    set, the senders of messages are taken from the SMTP MAIL commands.
+    Otherwise the content of these commands is ignored and the sender is set up
+    as the calling user. Unqualified addresses are automatically qualified
+    using qualify_domain and qualify_recipient, as appropriate, unless the -bnq
+    option is used.
+
+    The -bs option is also used to run Exim from inetd, as an alternative to
+    using a listening daemon. Exim can distinguish the two cases by checking
+    whether the standard input is a TCP/IP socket. When Exim is called from 
+    inetd, the source of the mail is assumed to be remote, and the comments
+    above concerning senders and qualification do not apply. In this situation,
+    Exim behaves in exactly the same way as it does when receiving a message
+    via the listening daemon.
+
+-bt
+
+    This option runs Exim in address testing mode, in which each argument is
+    taken as a recipient address to be tested for deliverability. The results
+    are written to the standard output. If a test fails, and the caller is not
+    an admin user, no details of the failure are output, because these might
+    contain sensitive information such as usernames and passwords for database
+    lookups.
+
+    If no arguments are given, Exim runs in an interactive manner, prompting
+    with a right angle bracket for addresses to be tested.
+
+    Unlike the -be test option, you cannot arrange for Exim to use the readline
+    () function, because it is running as root and there are security issues.
+
+    Each address is handled as if it were the recipient address of a message
+    (compare the -bv option). It is passed to the routers and the result is
+    written to the standard output. However, any router that has 
+    no_address_test set is bypassed. This can make -bt easier to use for
+    genuine routing tests if your first router passes everything to a scanner
+    program.
+
+    The return code is 2 if any address failed outright; it is 1 if no address
+    failed outright but at least one could not be resolved for some reason.
+    Return code 0 is given only when all addresses succeed.
+
+    Note: When actually delivering a message, Exim removes duplicate recipient
+    addresses after routing is complete, so that only one delivery takes place.
+    This does not happen when testing with -bt; the full results of routing are
+    always shown.
+
+    Warning: -bt can only do relatively simple testing. If any of the routers
+    in the configuration makes any tests on the sender address of a message, 
+    you can use the -f option to set an appropriate sender when running -bt
+    tests. Without it, the sender is assumed to be the calling user at the
+    default qualifying domain. However, if you have set up (for example)
+    routers whose behaviour depends on the contents of an incoming message, you
+    cannot test those conditions using -bt. The -N option provides a possible
+    way of doing such tests.
+
+-bV
+
+    This option causes Exim to write the current version number, compilation
+    number, and compilation date of the exim binary to the standard output. It
+    also lists the DBM library that is being used, the optional modules (such
+    as specific lookup types), the drivers that are included in the binary, and
+    the name of the runtime configuration file that is in use.
+
+    As part of its operation, -bV causes Exim to read and syntax check its
+    configuration file. However, this is a static check only. It cannot check
+    values that are to be expanded. For example, although a misspelt ACL verb
+    is detected, an error in the verb's arguments is not. You cannot rely on 
+    -bV alone to discover (for example) all the typos in the configuration;
+    some realistic testing is needed. The -bh and -N options provide more
+    dynamic testing facilities.
+
+-bv
+
+    This option runs Exim in address verification mode, in which each argument
+    is taken as a recipient address to be verified by the routers. (This does
+    not involve any verification callouts). During normal operation,
+    verification happens mostly as a consequence processing a verify condition
+    in an ACL (see chapter 44). If you want to test an entire ACL, possibly
+    including callouts, see the -bh and -bhc options.
+
+    If verification fails, and the caller is not an admin user, no details of
+    the failure are output, because these might contain sensitive information
+    such as usernames and passwords for database lookups.
+
+    If no arguments are given, Exim runs in an interactive manner, prompting
+    with a right angle bracket for addresses to be verified.
+
+    Unlike the -be test option, you cannot arrange for Exim to use the readline
+    () function, because it is running as exim and there are security issues.
+
+    Verification differs from address testing (the -bt option) in that routers
+    that have no_verify set are skipped, and if the address is accepted by a
+    router that has fail_verify set, verification fails. The address is
+    verified as a recipient if -bv is used; to test verification for a sender
+    address, -bvs should be used.
+
+    If the -v option is not set, the output consists of a single line for each
+    address, stating whether it was verified or not, and giving a reason in the
+    latter case. Without -v, generating more than one address by redirection
+    causes verification to end successfully, without considering the generated
+    addresses. However, if just one address is generated, processing continues,
+    and the generated address must verify successfully for the overall
+    verification to succeed.
+
+    When -v is set, more details are given of how the address has been handled,
+    and in the case of address redirection, all the generated addresses are
+    also considered. Verification may succeed for some and fail for others.
+
+    The return code is 2 if any address failed outright; it is 1 if no address
+    failed outright but at least one could not be resolved for some reason.
+    Return code 0 is given only when all addresses succeed.
+
+    If any of the routers in the configuration makes any tests on the sender
+    address of a message, you should use the -f option to set an appropriate
+    sender when running -bv tests. Without it, the sender is assumed to be the
+    calling user at the default qualifying domain.
+
+-bvs
+
+    This option acts like -bv, but verifies the address as a sender rather than
+    a recipient address. This affects any rewriting and qualification that
+    might happen.
+
+-bw
+
+    This option runs Exim as a daemon, awaiting incoming SMTP connections,
+    similarly to the -bd option. All port specifications on the command-line
+    and in the configuration file are ignored. Queue-running may not be
+    specified.
+
+    In this mode, Exim expects to be passed a socket as fd 0 (stdin) which is
+    listening for connections. This permits the system to start up and have
+    inetd (or equivalent) listen on the SMTP ports, starting an Exim daemon for
+    each port only when the first connection is received.
+
+    If the option is given as -bw<time> then the time is a timeout, after which
+    the daemon will exit, which should cause inetd to listen once more.
+
+-C <filelist>
+
+    This option causes Exim to find the runtime configuration file from the
+    given list instead of from the list specified by the CONFIGURE_FILE
+    compile-time setting. Usually, the list will consist of just a single
+    filename, but it can be a colon-separated list of names. In this case, the
+    first file that exists is used. Failure to open an existing file stops Exim
+    from proceeding any further along the list, and an error is generated.
+
+    When this option is used by a caller other than root, and the list is
+    different from the compiled-in list, Exim gives up its root privilege
+    immediately, and runs with the real and effective uid and gid set to those
+    of the caller. However, if a TRUSTED_CONFIG_LIST file is defined in Local/
+    Makefile, that file contains a list of full pathnames, one per line, for
+    configuration files which are trusted. Root privilege is retained for any
+    configuration file so listed, as long as the caller is the Exim user (or
+    the user specified in the CONFIGURE_OWNER option, if any), and as long as
+    the configuration file is not writeable by inappropriate users or groups.
+
+    Leaving TRUSTED_CONFIG_LIST unset precludes the possibility of testing a
+    configuration using -C right through message reception and delivery, even
+    if the caller is root. The reception works, but by that time, Exim is
+    running as the Exim user, so when it re-executes to regain privilege for
+    the delivery, the use of -C causes privilege to be lost. However, root can
+    test reception and delivery using two separate commands (one to put a
+    message in the queue, using -odq, and another to do the delivery, using -M
+    ).
+
+    If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a prefix
+    string with which any file named in a -C command line option must start. In
+    addition, the filename must not contain the sequence "/../". However, if
+    the value of the -C option is identical to the value of CONFIGURE_FILE in
+    Local/Makefile, Exim ignores -C and proceeds as usual. There is no default
+    setting for ALT_CONFIG_PREFIX; when it is unset, any filename can be used
+    with -C.
+
+    ALT_CONFIG_PREFIX can be used to confine alternative configuration files to
+    a directory to which only root has access. This prevents someone who has
+    broken into the Exim account from running a privileged Exim with an
+    arbitrary configuration file.
+
+    The -C facility is useful for ensuring that configuration files are
+    syntactically correct, but cannot be used for test deliveries, unless the
+    caller is privileged, or unless it is an exotic configuration that does not
+    require privilege. No check is made on the owner or group of the files
+    specified by this option.
+
+-D<macro>=<value>
+
+    This option can be used to override macro definitions in the configuration
+    file (see section 6.4). However, like -C, if it is used by an unprivileged
+    caller, it causes Exim to give up its root privilege. If DISABLE_D_OPTION
+    is defined in Local/Makefile, the use of -D is completely disabled, and its
+    use causes an immediate error exit.
+
+    If WHITELIST_D_MACROS is defined in Local/Makefile then it should be a
+    colon-separated list of macros which are considered safe and, if -D only
+    supplies macros from this list, and the values are acceptable, then Exim
+    will not give up root privilege if the caller is root, the Exim run-time
+    user, or the CONFIGURE_OWNER, if set. This is a transition mechanism and is
+    expected to be removed in the future. Acceptable values for the macros
+    satisfy the regexp: "^[A-Za-z0-9_/.-]*$"
+
+    The entire option (including equals sign if present) must all be within one
+    command line item. -D can be used to set the value of a macro to the empty
+    string, in which case the equals sign is optional. These two commands are
+    synonymous:
+
+    exim -DABC  ...
+    exim -DABC= ...
+
+    To include spaces in a macro definition item, quotes must be used. If you
+    use quotes, spaces are permitted around the macro name and the equals sign.
+    For example:
+
+    exim '-D ABC = something' ...
+
+    -D may be repeated up to 10 times on a command line. Only macro names up to
+    22 letters long can be set.
+
+-d<debug options>
+
+    This option causes debugging information to be written to the standard
+    error stream. It is restricted to admin users because debugging output may
+    show database queries that contain password information. Also, the details
+    of users' filter files should be protected. If a non-admin user uses -d,
+    Exim writes an error message to the standard error stream and exits with a
+    non-zero return code.
+
+    When -d is used, -v is assumed. If -d is given on its own, a lot of
+    standard debugging data is output. This can be reduced, or increased to
+    include some more rarely needed information, by directly following -d with
+    a string made up of names preceded by plus or minus characters. These add
+    or remove sets of debugging data, respectively. For example, -d+filter adds
+    filter debugging, whereas -d-all+filter selects only filter debugging. Note
+    that no spaces are allowed in the debug setting. The available debugging
+    categories are:
+
+        acl          ACL interpretation
+        auth         authenticators
+        deliver      general delivery logic
+        dns          DNS lookups (see also resolver)
+        dnsbl        DNS black list (aka RBL) code
+        exec         arguments for execv() calls
+        expand       detailed debugging for string expansions
+        filter       filter handling
+        hints_lookup hints data lookups
+        host_lookup  all types of name-to-IP address handling
+        ident        ident lookup
+        interface    lists of local interfaces
+        lists        matching things in lists
+        load         system load checks
+        local_scan   can be used by local_scan() (see chapter 46)
+        lookup       general lookup code and all lookups
+        memory       memory handling
+        noutf8       modifier: avoid UTF-8 line-drawing
+        pid          modifier: add pid to debug output lines
+        process_info setting info for the process log
+        queue_run    queue runs
+        receive      general message reception logic
+        resolver     turn on the DNS resolver's debugging output
+        retry        retry handling
+        rewrite      address rewriting"
+        route        address routing
+        timestamp    modifier: add timestamp to debug output lines
+        tls          TLS logic
+        transport    transports
+        uid          changes of uid/gid and looking up uid/gid
+        verify       address verification logic
+        all          almost all of the above (see below), and also -v
+
+    The "all" option excludes "memory" when used as "+all", but includes it for
+    "-all". The reason for this is that "+all" is something that people tend to
+    use when generating debug output for Exim maintainers. If "+memory" is
+    included, an awful lot of output that is very rarely of interest is
+    generated, so it now has to be explicitly requested. However, "-all" does
+    turn everything off.
+
+    The "resolver" option produces output only if the DNS resolver was compiled
+    with DEBUG enabled. This is not the case in some operating systems. Also,
+    unfortunately, debugging output from the DNS resolver is written to stdout
+    rather than stderr.
+
+    The default (-d with no argument) omits "expand", "filter", "interface",
+    "load", "memory", "pid", "resolver", and "timestamp". However, the "pid"
+    selector is forced when debugging is turned on for a daemon, which then
+    passes it on to any re-executed Exims. Exim also automatically adds the pid
+    to debug lines when several remote deliveries are run in parallel.
+
+    The "timestamp" selector causes the current time to be inserted at the
+    start of all debug output lines. This can be useful when trying to track
+    down delays in processing.
+
+    The "noutf8" selector disables the use of UTF-8 line-drawing characters to
+    group related information. When disabled. ascii-art is used instead. Using
+    the "+all" option does not set this modifier,
+
+    If the debug_print option is set in any driver, it produces output whenever
+    any debugging is selected, or if -v is used.
+
+-dd<debug options>
+
+    This option behaves exactly like -d except when used on a command that
+    starts a daemon process. In that case, debugging is turned off for the
+    subprocesses that the daemon creates. Thus, it is useful for monitoring the
+    behaviour of the daemon without creating as much output as full debugging
+    does.
+
+-dropcr
+
+    This is an obsolete option that is now a no-op. It used to affect the way
+    Exim handled CR and LF characters in incoming messages. What happens now is
+    described in section 48.2.
+
+-E
+
+    This option specifies that an incoming message is a locally-generated
+    delivery failure report. It is used internally by Exim when handling
+    delivery failures and is not intended for external use. Its only effect is
+    to stop Exim generating certain messages to the postmaster, as otherwise
+    message cascades could occur in some situations. As part of the same
+    option, a message id may follow the characters -E. If it does, the log
+    entry for the receipt of the new message contains the id, following "R=",
+    as a cross-reference.
+
+-ex
+
+    There are a number of Sendmail options starting with -oe which seem to be
+    called by various programs without the leading o in the option. For
+    example, the vacation program uses -eq. Exim treats all options of the form
+    -ex as synonymous with the corresponding -oex options.
+
+-F <string>
+
+    This option sets the sender's full name for use when a locally-generated
+    message is being accepted. In the absence of this option, the user's gecos
+    entry from the password data is used. As users are generally permitted to
+    alter their gecos entries, no security considerations are involved. White
+    space between -F and the <string> is optional.
+
+-f <address>
+
+    This option sets the address of the envelope sender of a locally-generated
+    message (also known as the return path). The option can normally be used
+    only by a trusted user, but untrusted_set_sender can be set to allow
+    untrusted users to use it.
+
+    Processes running as root or the Exim user are always trusted. Other
+    trusted users are defined by the trusted_users or trusted_groups options.
+    In the absence of -f, or if the caller is not trusted, the sender of a
+    local message is set to the caller's login name at the default qualify
+    domain.
+
+    There is one exception to the restriction on the use of -f: an empty sender
+    can be specified by any user, trusted or not, to create a message that can
+    never provoke a bounce. An empty sender can be specified either as an empty
+    string, or as a pair of angle brackets with nothing between them, as in
+    these examples of shell commands:
+
+    exim -f '<>' user@domain
+    exim -f "" user@domain
+
+    In addition, the use of -f is not restricted when testing a filter file
+    with -bf or when testing or verifying addresses using the -bt or -bv
+    options.
+
+    Allowing untrusted users to change the sender address does not of itself
+    make it possible to send anonymous mail. Exim still checks that the From:
+    header refers to the local user, and if it does not, it adds a Sender:
+    header, though this can be overridden by setting no_local_from_check.
+
+    White space between -f and the <address> is optional (that is, they can be
+    given as two arguments or one combined argument). The sender of a
+    locally-generated message can also be set (when permitted) by an initial
+    "From " line in the message - see the description of -bm above - but if -f
+    is also present, it overrides "From ".
+
+-G
+
+    This option is equivalent to an ACL applying:
+
+    control = suppress_local_fixups
+
+    for every message received. Note that Sendmail will complain about such bad
+    formatting, where Exim silently just does not fix it up. This may change in
+    future.
+
+    As this affects audit information, the caller must be a trusted user to use
+    this option.
+
+-h <number>
+
+    This option is accepted for compatibility with Sendmail, but has no effect.
+    (In Sendmail it overrides the "hop count" obtained by counting Received:
+    headers.)
+
+-i
+
+    This option, which has the same effect as -oi, specifies that a dot on a
+    line by itself should not terminate an incoming, non-SMTP message. Solaris
+    2.4 (SunOS 5.4) Sendmail has a similar -i processing option https://
+    docs.oracle.com/cd/E19457-01/801-6680-1M/801-6680-1M.pdf, p. 1M-529), and
+    therefore a -oi command line option, which both are used by its mailx
+    command.
+
+-L <tag>
+
+    This option is equivalent to setting syslog_processname in the config file
+    and setting log_file_path to "syslog". Its use is restricted to
+    administrators. The configuration file has to be read and parsed, to
+    determine access rights, before this is set and takes effect, so early
+    configuration file errors will not honour this flag.
+
+    The tag should not be longer than 32 characters.
+
+-M <message id> <message id> ...
+
+    This option requests Exim to run a delivery attempt on each message in
+    turn. If any of the messages are frozen, they are automatically thawed
+    before the delivery attempt. The settings of queue_domains, 
+    queue_smtp_domains, and hold_domains are ignored.
+
+    Retry hints for any of the addresses are overridden - Exim tries to deliver
+    even if the normal retry time has not yet been reached. This option
+    requires the caller to be an admin user. However, there is an option called
+    prod_requires_admin which can be set false to relax this restriction (and
+    also the same requirement for the -q, -R, and -S options).
+
+    The deliveries happen synchronously, that is, the original Exim process
+    does not terminate until all the delivery attempts have finished. No output
+    is produced unless there is a serious error. If you want to see what is
+    happening, use the -v option as well, or inspect Exim's main log.
+
+-Mar <message id> <address> <address> ...
+
+    This option requests Exim to add the addresses to the list of recipients of
+    the message ("ar" for "add recipients"). The first argument must be a
+    message id, and the remaining ones must be email addresses. However, if the
+    message is active (in the middle of a delivery attempt), it is not altered.
+    This option can be used only by an admin user.
+
+-MC <transport> <hostname> <host IP> <sequence number> <message id>
+
+    This option is not intended for use by external callers. It is used
+    internally by Exim to invoke another instance of itself to deliver a
+    waiting message using an existing SMTP connection, which is passed as the
+    standard input. Details are given in chapter 49. This must be the final
+    option, and the caller must be root or the Exim user in order to use it.
+
+-MCA
+
+    This option is not intended for use by external callers. It is used
+    internally by Exim in conjunction with the -MC option. It signifies that
+    the connection to the remote host has been authenticated.
+
+-MCD
+
+    This option is not intended for use by external callers. It is used
+    internally by Exim in conjunction with the -MC option. It signifies that
+    the remote host supports the ESMTP DSN extension.
+
+-MCd
+
+    This option is not intended for use by external callers. It is used
+    internally by Exim in conjunction with the -d option to pass on an
+    information string on the purpose of the process.
+
+-MCG <queue name>
+
+    This option is not intended for use by external callers. It is used
+    internally by Exim in conjunction with the -MC option. It signifies that an
+    alternate queue is used, named by the following argument.
+
+-MCK
+
+    This option is not intended for use by external callers. It is used
+    internally by Exim in conjunction with the -MC option. It signifies that a
+    remote host supports the ESMTP CHUNKING extension.
+
+-MCL
+
+    This option is not intended for use by external callers. It is used
+    internally by Exim in conjunction with the -MC option. It signifies that
+    the server to which Exim is connected advertised limits on numbers of
+    mails, recipients or recipient domains. The limits are given by the
+    following three arguments.
+
+-MCP
+
+    This option is not intended for use by external callers. It is used
+    internally by Exim in conjunction with the -MC option. It signifies that
+    the server to which Exim is connected supports pipelining.
+
+-MCp
+
+    This option is not intended for use by external callers. It is used
+    internally by Exim in conjunction with the -MC option. It signifies that
+    the connection t a remote server is via a SOCKS proxy, using addresses and
+    ports given by the following four arguments.
+
+-MCQ <process id> <pipe fd>
+
+    This option is not intended for use by external callers. It is used
+    internally by Exim in conjunction with the -MC option when the original
+    delivery was started by a queue runner. It passes on the process id of the
+    queue runner, together with the file descriptor number of an open pipe.
+    Closure of the pipe signals the final completion of the sequence of
+    processes that are passing messages through the same SMTP connection.
+
+-MCq <recipient address> <size>
+
+    This option is not intended for use by external callers. It is used
+    internally by Exim to implement quota checking for local users.
+
+-MCS
+
+    This option is not intended for use by external callers. It is used
+    internally by Exim in conjunction with the -MC option, and passes on the
+    fact that the ESMTP SIZE option should be used on messages delivered down
+    the existing connection.
+
+-MCT
+
+    This option is not intended for use by external callers. It is used
+    internally by Exim in conjunction with the -MC option, and passes on the
+    fact that the host to which Exim is connected supports TLS encryption.
+
+-MCr <SNI>, -MCs <SNI>
+
+    These options are not intended for use by external callers. It is used
+    internally by Exim in conjunction with the -MCt option, and passes on the
+    fact that a TLS Server Name Indication was sent as part of the channel
+    establishment. The argument gives the SNI string. The "r" variant indicates
+    a DANE-verified connection.
+
+-MCt <IP address> <port> <cipher>
+
+    This option is not intended for use by external callers. It is used
+    internally by Exim in conjunction with the -MC option, and passes on the
+    fact that the connection is being proxied by a parent process for handling
+    TLS encryption. The arguments give the local address and port being
+    proxied, and the TLS cipher.
+
+-Mc <message id> <message id> ...
+
+    This option requests Exim to run a delivery attempt on each message, in
+    turn, but unlike the -M option, it does check for retry hints, and respects
+    any that are found. This option is not very useful to external callers. It
+    is provided mainly for internal use by Exim when it needs to re-invoke
+    itself in order to regain root privilege for a delivery (see chapter 56).
+    However, -Mc can be useful when testing, in order to run a delivery that
+    respects retry times and other options such as hold_domains that are
+    overridden when -M is used. Such a delivery does not count as a queue run.
+    If you want to run a specific delivery as if in a queue run, you should use
+    -q with a message id argument. A distinction between queue run deliveries
+    and other deliveries is made in one or two places.
+
+-Mes <message id> <address>
+
+    This option requests Exim to change the sender address in the message to
+    the given address, which must be a fully qualified address or "<>" ("es"
+    for "edit sender"). There must be exactly two arguments. The first argument
+    must be a message id, and the second one an email address. However, if the
+    message is active (in the middle of a delivery attempt), its status is not
+    altered. This option can be used only by an admin user.
+
+-Mf <message id> <message id> ...
+
+    This option requests Exim to mark each listed message as "frozen". This
+    prevents any delivery attempts taking place until the message is "thawed",
+    either manually or as a result of the auto_thaw configuration option.
+    However, if any of the messages are active (in the middle of a delivery
+    attempt), their status is not altered. This option can be used only by an
+    admin user.
+
+-Mg <message id> <message id> ...
+
+    This option requests Exim to give up trying to deliver the listed messages,
+    including any that are frozen. However, if any of the messages are active,
+    their status is not altered. For non-bounce messages, a delivery error
+    message is sent to the sender, containing the text "cancelled by
+    administrator". Bounce messages are just discarded. This option can be used
+    only by an admin user.
+
+-MG <queue name> <message id> <message id> ...
+
+    This option requests that each listed message be moved from its current
+    queue to the given named queue. The destination queue name argument is
+    required, but can be an empty string to define the default queue. If the
+    messages are not currently located in the default queue, a -qG<name> option
+    will be required to define the source queue.
+
+-Mmad <message id> <message id> ...
+
+    This option requests Exim to mark all the recipient addresses in the
+    messages as already delivered ("mad" for "mark all delivered"). However, if
+    any message is active (in the middle of a delivery attempt), its status is
+    not altered. This option can be used only by an admin user.
+
+-Mmd <message id> <address> <address> ...
+
+    This option requests Exim to mark the given addresses as already delivered
+    ("md" for "mark delivered"). The first argument must be a message id, and
+    the remaining ones must be email addresses. These are matched to recipient
+    addresses in the message in a case-sensitive manner. If the message is
+    active (in the middle of a delivery attempt), its status is not altered.
+    This option can be used only by an admin user.
+
+-Mrm <message id> <message id> ...
+
+    This option requests Exim to remove the given messages from the queue. No
+    bounce messages are sent; each message is simply forgotten. However, if any
+    of the messages are active, their status is not altered. This option can be
+    used only by an admin user or by the user who originally caused the message
+    to be placed in the queue.
+
+-Mset <message id>
+
+    This option is useful only in conjunction with -be (that is, when testing
+    string expansions). Exim loads the given message from its spool before
+    doing the test expansions, thus setting message-specific variables such as
+    $message_size and the header variables. The $recipients variable is made
+    available. This feature is provided to make it easier to test expansions
+    that make use of these variables. However, this option can be used only by
+    an admin user. See also -bem.
+
+-Mt <message id> <message id> ...
+
+    This option requests Exim to "thaw" any of the listed messages that are
+    "frozen", so that delivery attempts can resume. However, if any of the
+    messages are active, their status is not altered. This option can be used
+    only by an admin user.
+
+-Mvb <message id>
+
+    This option causes the contents of the message body (-D) spool file to be
+    written to the standard output. This option can be used only by an admin
+    user.
+
+-Mvc <message id>
+
+    This option causes a copy of the complete message (header lines plus body)
+    to be written to the standard output in RFC 2822 format. This option can be
+    used only by an admin user.
+
+-Mvh <message id>
+
+    This option causes the contents of the message headers (-H) spool file to
+    be written to the standard output. This option can be used only by an admin
+    user.
+
+-Mvl <message id>
+
+    This option causes the contents of the message log spool file to be written
+    to the standard output. This option can be used only by an admin user.
+
+-m
+
+    This is a synonym for -om that is accepted by Sendmail (https://
+    docs.oracle.com/cd/E19457-01/801-6680-1M/801-6680-1M.pdf p. 1M-258), so
+    Exim treats it that way too.
+
+-N
+
+    This is a debugging option that inhibits delivery of a message at the
+    transport level. It implies -v. Exim goes through many of the motions of
+    delivery - it just doesn't actually transport the message, but instead
+    behaves as if it had successfully done so. However, it does not make any
+    updates to the retry database, and the log entries for deliveries are
+    flagged with "*>" rather than "=>".
+
+    Because -N discards any message to which it applies, only root or the Exim
+    user are allowed to use it with -bd, -q, -R or -M. In other words, an
+    ordinary user can use it only when supplying an incoming message to which
+    it will apply. Although transportation never fails when -N is set, an
+    address may be deferred because of a configuration problem on a transport,
+    or a routing problem. Once -N has been used for a delivery attempt, it
+    sticks to the message, and applies to any subsequent delivery attempts that
+    may happen for that message.
+
+-n
+
+    This option is interpreted by Sendmail to mean "no aliasing". For normal
+    modes of operation, it is ignored by Exim. When combined with -bP it makes
+    the output more terse (suppresses option names, environment values and
+    config pretty printing).
+
+-O <data>
+
+    This option is interpreted by Sendmail to mean "set option". It is ignored
+    by Exim.
+
+-oA <file name>
+
+    This option is used by Sendmail in conjunction with -bi to specify an
+    alternative alias filename. Exim handles -bi differently; see the
+    description above.
+
+-oB <n>
+
+    This is a debugging option which limits the maximum number of messages that
+    can be delivered down one SMTP connection, overriding the value set in any 
+    smtp transport. If <n> is omitted, the limit is set to 1.
+
+-odb
+
+    This option applies to all modes in which Exim accepts incoming messages,
+    including the listening daemon. It requests "background" delivery of such
+    messages, which means that the accepting process automatically starts a
+    delivery process for each message received, but does not wait for the
+    delivery processes to finish.
+
+    When all the messages have been received, the reception process exits,
+    leaving the delivery processes to finish in their own time. The standard
+    output and error streams are closed at the start of each delivery process.
+    This is the default action if none of the -od options are present.
+
+    If one of the queueing options in the configuration file (queue_only or 
+    queue_only_file, for example) is in effect, -odb overrides it if 
+    queue_only_override is set true, which is the default setting. If 
+    queue_only_override is set false, -odb has no effect.
+
+-odf
+
+    This option requests "foreground" (synchronous) delivery when Exim has
+    accepted a locally-generated message. (For the daemon it is exactly the
+    same as -odb.) A delivery process is automatically started to deliver the
+    message, and Exim waits for it to complete before proceeding.
+
+    The original Exim reception process does not finish until the delivery
+    process for the final message has ended. The standard error stream is left
+    open during deliveries.
+
+    However, like -odb, this option has no effect if queue_only_override is
+    false and one of the queueing options in the configuration file is in
+    effect.
+
+    If there is a temporary delivery error during foreground delivery, the
+    message is left in the queue for later delivery, and the original reception
+    process exits. See chapter 52 for a way of setting up a restricted
+    configuration that never queues messages.
+
+-odi
+
+    This option is synonymous with -odf. It is provided for compatibility with
+    Sendmail.
+
+-odq
+
+    This option applies to all modes in which Exim accepts incoming messages,
+    including the listening daemon. It specifies that the accepting process
+    should not automatically start a delivery process for each message
+    received. Messages are placed in the queue, and remain there until a
+    subsequent queue runner process encounters them. There are several
+    configuration options (such as queue_only) that can be used to queue
+    incoming messages under certain conditions. This option overrides all of
+    them and also -odqs. It always forces queueing.
+
+-odqs
+
+    This option is a hybrid between -odb/-odi and -odq. However, like -odb and 
+    -odi, this option has no effect if queue_only_override is false and one of
+    the queueing options in the configuration file is in effect.
+
+    When -odqs does operate, a delivery process is started for each incoming
+    message, in the background by default, but in the foreground if -odi is
+    also present. The recipient addresses are routed, and local deliveries are
+    done in the normal way. However, if any SMTP deliveries are required, they
+    are not done at this time, so the message remains in the queue until a
+    subsequent queue runner process encounters it. Because routing was done,
+    Exim knows which messages are waiting for which hosts, and so a number of
+    messages for the same host can be sent in a single SMTP connection. The 
+    queue_smtp_domains configuration option has the same effect for specific
+    domains. See also the -qq option.
+
+-oee
+
+    If an error is detected while a non-SMTP message is being received (for
+    example, a malformed address), the error is reported to the sender in a
+    mail message.
+
+    Provided this error message is successfully sent, the Exim receiving
+    process exits with a return code of zero. If not, the return code is 2 if
+    the problem is that the original message has no recipients, or 1 for any
+    other error. This is the default -oex option if Exim is called as rmail.
+
+-oem
+
+    This is the same as -oee, except that Exim always exits with a non-zero
+    return code, whether or not the error message was successfully sent. This
+    is the default -oex option, unless Exim is called as rmail.
+
+-oep
+
+    If an error is detected while a non-SMTP message is being received, the
+    error is reported by writing a message to the standard error file (stderr).
+    The return code is 1 for all errors.
+
+-oeq
+
+    This option is supported for compatibility with Sendmail, but has the same
+    effect as -oep.
+
+-oew
+
+    This option is supported for compatibility with Sendmail, but has the same
+    effect as -oem.
+
+-oi
+
+    This option, which has the same effect as -i, specifies that a dot on a
+    line by itself should not terminate an incoming, non-SMTP message.
+    Otherwise, a single dot does terminate, though Exim does no special
+    processing for other lines that start with a dot. This option is set by
+    default if Exim is called as rmail. See also -ti.
+
+-oitrue
+
+    This option is treated as synonymous with -oi.
+
+-oMa <host address>
+
+    A number of options starting with -oM can be used to set values associated
+    with remote hosts on locally-submitted messages (that is, messages not
+    received over TCP/IP). These options can be used by any caller in
+    conjunction with the -bh, -be, -bf, -bF, -bt, or -bv testing options. In
+    other circumstances, they are ignored unless the caller is trusted.
+
+    The -oMa option sets the sender host address. This may include a port
+    number at the end, after a full stop (period). For example:
+
+    exim -bs -oMa 10.9.8.7.1234
+
+    An alternative syntax is to enclose the IP address in square brackets,
+    followed by a colon and the port number:
+
+    exim -bs -oMa [10.9.8.7]:1234
+
+    The IP address is placed in the $sender_host_address variable, and the
+    port, if present, in $sender_host_port. If both -oMa and -bh are present on
+    the command line, the sender host IP address is taken from whichever one is
+    last.
+
+-oMaa <name>
+
+    See -oMa above for general remarks about the -oM options. The -oMaa option
+    sets the value of $sender_host_authenticated (the authenticator name). See
+    chapter 33 for a discussion of SMTP authentication. This option can be used
+    with -bh and -bs to set up an authenticated SMTP session without actually
+    using the SMTP AUTH command.
+
+-oMai <string>
+
+    See -oMa above for general remarks about the -oM options. The -oMai option
+    sets the value of $authenticated_id (the id that was authenticated). This
+    overrides the default value (the caller's login id, except with -bh, where
+    there is no default) for messages from local sources. See chapter 33 for a
+    discussion of authenticated ids.
+
+-oMas <address>
+
+    See -oMa above for general remarks about the -oM options. The -oMas option
+    sets the authenticated sender value in $authenticated_sender. It overrides
+    the sender address that is created from the caller's login id for messages
+    from local sources, except when -bh is used, when there is no default. For
+    both -bh and -bs, an authenticated sender that is specified on a MAIL
+    command overrides this value. See chapter 33 for a discussion of
+    authenticated senders.
+
+-oMi <interface address>
+
+    See -oMa above for general remarks about the -oM options. The -oMi option
+    sets the IP interface address value. A port number may be included, using
+    the same syntax as for -oMa. The interface address is placed in
+    $received_ip_address and the port number, if present, in $received_port.
+
+-oMm <message reference>
+
+    See -oMa above for general remarks about the -oM options. The -oMm option
+    sets the message reference, e.g. message-id, and is logged during delivery.
+    This is useful when some kind of audit trail is required to tie messages
+    together. The format of the message reference is checked and will abort if
+    the format is invalid. The option will only be accepted if exim is running
+    in trusted mode, not as any regular user.
+
+    The best example of a message reference is when Exim sends a bounce
+    message. The message reference is the message-id of the original message
+    for which Exim is sending the bounce.
+
+-oMr <protocol name>
+
+    See -oMa above for general remarks about the -oM options. The -oMr option
+    sets the received protocol value that is stored in $received_protocol.
+    However, it does not apply (and is ignored) when -bh or -bs is used. For 
+    -bh, the protocol is forced to one of the standard SMTP protocol names (see
+    the description of $received_protocol in section 11.9). For -bs, the
+    protocol is always "local-" followed by one of those same names. For -bS
+    (batched SMTP) however, the protocol can be set by -oMr. Repeated use of
+    this option is not supported.
+
+-oMs <host name>
+
+    See -oMa above for general remarks about the -oM options. The -oMs option
+    sets the sender host name in $sender_host_name. When this option is
+    present, Exim does not attempt to look up a host name from an IP address;
+    it uses the name it is given.
+
+-oMt <ident string>
+
+    See -oMa above for general remarks about the -oM options. The -oMt option
+    sets the sender ident value in $sender_ident. The default setting for local
+    callers is the login id of the calling process, except when -bh is used,
+    when there is no default.
+
+-om
+
+    In Sendmail, this option means "me too", indicating that the sender of a
+    message should receive a copy of the message if the sender appears in an
+    alias expansion. Exim always does this, so the option does nothing.
+
+-oo
+
+    This option is ignored. In Sendmail it specifies "old style headers",
+    whatever that means.
+
+-oP <path>
+
+    This option is useful only in conjunction with -bd or -q with a time value.
+    The option specifies the file to which the process id of the daemon is
+    written. When -oX is used with -bd, or when -q with a time is used without 
+    -bd, this is the only way of causing Exim to write a pid file, because in
+    those cases, the normal pid file is not used.
+
+-oPX
+
+    This option is not intended for general use. The daemon uses it when
+    terminating due to a SIGTEM, possibly in combination with -oP <path>. It
+    causes the pid file to be removed.
+
+-or <time>
+
+    This option sets a timeout value for incoming non-SMTP messages. If it is
+    not set, Exim will wait forever for the standard input. The value can also
+    be set by the receive_timeout option. The format used for specifying times
+    is described in section 6.16.
+
+-os <time>
+
+    This option sets a timeout value for incoming SMTP messages. The timeout
+    applies to each SMTP command and block of data. The value can also be set
+    by the smtp_receive_timeout option; it defaults to 5 minutes. The format
+    used for specifying times is described in section 6.16.
+
+-ov
+
+    This option has exactly the same effect as -v.
+
+-oX <number or string>
+
+    This option is relevant only when the -bd (start listening daemon) option
+    is also given. It controls which ports and interfaces the daemon uses.
+    Details of the syntax, and how it interacts with configuration file
+    options, are given in chapter 13. When -oX is used to start a daemon, no
+    pid file is written unless -oP is also present to specify a pid filename.
+
+-oY
+
+    This option controls the creation of an inter-process communications
+    endpoint by the Exim daemon. It is only relevant when the -bd (start
+    listening daemon) option is also given. Normally the daemon creates this
+    socket, unless a -oX and no -oP option is also present. If this option is
+    given then the socket will not be created. This could be required if the
+    system is running multiple daemons.
+
+    The socket is currently used for
+
+      o fast ramp-up of queue runner processes
+
+      o obtaining a current queue size
+
+-pd
+
+    This option applies when an embedded Perl interpreter is linked with Exim
+    (see chapter 12). It overrides the setting of the perl_at_start option,
+    forcing the starting of the interpreter to be delayed until it is needed.
+
+-ps
+
+    This option applies when an embedded Perl interpreter is linked with Exim
+    (see chapter 12). It overrides the setting of the perl_at_start option,
+    forcing the starting of the interpreter to occur as soon as Exim is
+    started.
+
+-p<rval>:<sval>
+
+    For compatibility with Sendmail, this option is equivalent to
+
+    -oMr <rval> -oMs <sval>
+
+    It sets the incoming protocol and host name (for trusted callers). The host
+    name and its colon can be omitted when only the protocol is to be set. Note
+    the Exim already has two private options, -pd and -ps, that refer to
+    embedded Perl. It is therefore impossible to set a protocol value of "d" or
+    "s" using this option (but that does not seem a real limitation). Repeated
+    use of this option is not supported.
+
+-q
+
+    This option is normally restricted to admin users. However, there is a
+    configuration option called prod_requires_admin which can be set false to
+    relax this restriction (and also the same requirement for the -M, -R, and 
+    -S options).
+
+    If other commandline options do not specify an action, the -q option starts
+    one queue runner process. This scans the queue of waiting messages, and
+    runs a delivery process for each one in turn. It waits for each delivery
+    process to finish before starting the next one. A delivery process may not
+    actually do any deliveries if the retry times for the addresses have not
+    been reached. Use -qf (see below) if you want to override this.
+
+    If the delivery process spawns other processes to deliver other messages
+    down passed SMTP connections, the queue runner waits for these to finish
+    before proceeding.
+
+    When all the queued messages have been considered, the original queue
+    runner process terminates. In other words, a single pass is made over the
+    waiting mail, one message at a time. Use -q with a time (see below) if you
+    want this to be repeated periodically.
+
+    Exim processes the waiting messages in an unpredictable order. It isn't
+    very random, but it is likely to be different each time, which is all that
+    matters. If one particular message screws up a remote MTA, other messages
+    to the same MTA have a chance of getting through if they get tried first.
+
+    It is possible to cause the messages to be processed in lexical message id
+    order, which is essentially the order in which they arrived, by setting the
+    queue_run_in_order option, but this is not recommended for normal use.
+
+-q<qflags>
+
+    The -q option may be followed by one or more flag letters that change its
+    behaviour. They are all optional, but if more than one is present, they
+    must appear in the correct order. Each flag is described in a separate item
+    below.
+
+-qq...
+
+    An option starting with -qq requests a two-stage queue run. In the first
+    stage, the queue is scanned as if the queue_smtp_domains option matched
+    every domain. Addresses are routed, local deliveries happen, but no remote
+    transports are run.
+
+    Performance will be best if the queue_run_in_order option is false. If that
+    is so and the queue_fast_ramp option is true then in the first phase of the
+    run, once a threshold number of messages are routed for a given host, a
+    delivery process is forked in parallel with the rest of the scan.
+
+    The hints database that remembers which messages are waiting for specific
+    hosts is updated, as if delivery to those hosts had been deferred. After
+    this is complete, a second, normal queue scan happens, with routing and
+    delivery taking place as normal. Messages that are routed to the same host
+    should mostly be delivered down a single SMTP connection because of the
+    hints that were set up during the first queue scan. This option may be
+    useful for hosts that are connected to the Internet intermittently.
+
+-q[q]i...
+
+    If the i flag is present, the queue runner runs delivery processes only for
+    those messages that haven't previously been tried. (i stands for "initial
+    delivery".) This can be helpful if you are putting messages in the queue
+    using -odq and want a queue runner just to process the new messages.
+
+-q[q][i]f...
+
+    If one f flag is present, a delivery attempt is forced for each non-frozen
+    message, whereas without f only those non-frozen addresses that have passed
+    their retry times are tried.
+
+-q[q][i]ff...
+
+    If ff is present, a delivery attempt is forced for every message, whether
+    frozen or not.
+
+-q[q][i][f[f]]l
+
+    The l (the letter "ell") flag specifies that only local deliveries are to
+    be done. If a message requires any remote deliveries, it remains in the
+    queue for later delivery.
+
+-q[q][i][f[f]][l][G<name>[/<time>]]]
+
+    If the G flag and a name is present, the queue runner operates on the queue
+    with the given name rather than the default queue. The name should not
+    contain a / character. For a periodic queue run (see below) append to the
+    name a slash and a time value.
+
+    If other commandline options specify an action, a -qG<name> option will
+    specify a queue to operate on. For example:
+
+    exim -bp -qGquarantine
+    mailq -qGquarantine
+    exim -qGoffpeak -Rf @special.domain.example
+
+-q<qflags> <start id> <end id>
+
+    When scanning the queue, Exim can be made to skip over messages whose ids
+    are lexically less than a given value by following the -q option with a
+    starting message id. For example:
+
+    exim -q 0t5C6f-0000c8-00
+
+    Messages that arrived earlier than "0t5C6f-0000c8-00" are not inspected. If
+    a second message id is given, messages whose ids are lexically greater than
+    it are also skipped. If the same id is given twice, for example,
+
+    exim -q 0t5C6f-0000c8-00 0t5C6f-0000c8-00
+
+    just one delivery process is started, for that message. This differs from 
+    -M in that retry data is respected, and it also differs from -Mc in that it
+    counts as a delivery from a queue run. Note that the selection mechanism
+    does not affect the order in which the messages are scanned. There are also
+    other ways of selecting specific sets of messages for delivery in a queue
+    run - see -R and -S.
+
+-q<qflags><time>
+
+    When a time value is present, the -q option causes Exim to run as a daemon,
+    starting a queue runner process at intervals specified by the given time
+    value (whose format is described in section 6.16). This form of the -q
+    option is commonly combined with the -bd option, in which case a single
+    daemon process handles both functions. A common way of starting up a
+    combined daemon at system boot time is to use a command such as
+
+    /usr/exim/bin/exim -bd -q30m
+
+    Such a daemon listens for incoming SMTP calls, and also starts a queue
+    runner process every 30 minutes.
+
+    When a daemon is started by -q with a time value, but without -bd, no pid
+    file is written unless one is explicitly requested by the -oP option.
+
+-qR<rsflags> <string>
+
+    This option is synonymous with -R. It is provided for Sendmail
+    compatibility.
+
+-qS<rsflags> <string>
+
+    This option is synonymous with -S.
+
+-R<rsflags> <string>
+
+    The <rsflags> may be empty, in which case the white space before the string
+    is optional, unless the string is f, ff, r, rf, or rff, which are the
+    possible values for <rsflags>. White space is required if <rsflags> is not
+    empty.
+
+    This option is similar to -q with no time value, that is, it causes Exim to
+    perform a single queue run, except that, when scanning the messages on the
+    queue, Exim processes only those that have at least one undelivered
+    recipient address containing the given string, which is checked in a
+    case-independent way. If the <rsflags> start with r, <string> is
+    interpreted as a regular expression; otherwise it is a literal string.
+
+    If you want to do periodic queue runs for messages with specific
+    recipients, you can combine -R with -q and a time value. For example:
+
+    exim -q25m -R @special.domain.example
+
+    This example does a queue run for messages with recipients in the given
+    domain every 25 minutes. Any additional flags that are specified with -q
+    are applied to each queue run.
+
+    Once a message is selected for delivery by this mechanism, all its
+    addresses are processed. For the first selected message, Exim overrides any
+    retry information and forces a delivery attempt for each undelivered
+    address. This means that if delivery of any address in the first message is
+    successful, any existing retry information is deleted, and so delivery
+    attempts for that address in subsequently selected messages (which are
+    processed without forcing) will run. However, if delivery of any address
+    does not succeed, the retry information is updated, and in subsequently
+    selected messages, the failing address will be skipped.
+
+    If the <rsflags> contain f or ff, the delivery forcing applies to all
+    selected messages, not just the first; frozen messages are included when ff
+    is present.
+
+    The -R option makes it straightforward to initiate delivery of all messages
+    to a given domain after a host has been down for some time. When the SMTP
+    command ETRN is accepted by its ACL (see chapter 44), its default effect is
+    to run Exim with the -R option, but it can be configured to run an
+    arbitrary command instead.
+
+-r
+
+    This is a documented (for Sendmail) obsolete alternative name for -f.
+
+-S<rsflags> <string>
+
+    This option acts like -R except that it checks the string against each
+    message's sender instead of against the recipients. If -R is also set, both
+    conditions must be met for a message to be selected. If either of the
+    options has f or ff in its flags, the associated action is taken.
+
+-Tqt <times>
+
+    This is an option that is exclusively for use by the Exim testing suite. It
+    is not recognized when Exim is run normally. It allows for the setting up
+    of explicit "queue times" so that various warning/retry features can be
+    tested.
+
+-t
+
+    When Exim is receiving a locally-generated, non-SMTP message on its
+    standard input, the -t option causes the recipients of the message to be
+    obtained from the To:, Cc:, and Bcc: header lines in the message instead of
+    from the command arguments. The addresses are extracted before any
+    rewriting takes place and the Bcc: header line, if present, is then
+    removed.
+
+    If the command has any arguments, they specify addresses to which the
+    message is not to be delivered. That is, the argument addresses are removed
+    from the recipients list obtained from the headers. This is compatible with
+    Smail 3 and in accordance with the documented behaviour of several versions
+    of Sendmail, as described in man pages on a number of operating systems
+    (e.g. Solaris 8, IRIX 6.5, HP-UX 11). However, some versions of Sendmail 
+    add argument addresses to those obtained from the headers, and the O'Reilly
+    Sendmail book documents it that way. Exim can be made to add argument
+    addresses instead of subtracting them by setting the option 
+    extract_addresses_remove_arguments false.
+
+    If there are any Resent- header lines in the message, Exim extracts
+    recipients from all Resent-To:, Resent-Cc:, and Resent-Bcc: header lines
+    instead of from To:, Cc:, and Bcc:. This is for compatibility with Sendmail
+    and other MTAs. (Prior to release 4.20, Exim gave an error if -t was used
+    in conjunction with Resent- header lines.)
+
+    RFC 2822 talks about different sets of Resent- header lines (for when a
+    message is resent several times). The RFC also specifies that they should
+    be added at the front of the message, and separated by Received: lines. It
+    is not at all clear how -t should operate in the present of multiple sets,
+    nor indeed exactly what constitutes a "set". In practice, it seems that
+    MUAs do not follow the RFC. The Resent- lines are often added at the end of
+    the header, and if a message is resent more than once, it is common for the
+    original set of Resent- headers to be renamed as X-Resent- when a new set
+    is added. This removes any possible ambiguity.
+
+-ti
+
+    This option is exactly equivalent to -t -i. It is provided for
+    compatibility with Sendmail.
+
+-tls-on-connect
+
+    This option is available when Exim is compiled with TLS support. It forces
+    all incoming SMTP connections to behave as if the incoming port is listed
+    in the tls_on_connect_ports option. See section 13.4 and chapter 43 for
+    further details.
+
+-U
+
+    Sendmail uses this option for "initial message submission", and its
+    documentation states that in future releases, it may complain about
+    syntactically invalid messages rather than fixing them when this flag is
+    not set. Exim ignores this option.
+
+-v
+
+    This option causes Exim to write information to the standard error stream,
+    describing what it is doing. In particular, it shows the log lines for
+    receiving and delivering a message, and if an SMTP connection is made, the
+    SMTP dialogue is shown. Some of the log lines shown may not actually be
+    written to the log if the setting of log_selector discards them. Any
+    relevant selectors are shown with each log line. If none are shown, the
+    logging is unconditional.
+
+-x
+
+    AIX uses -x for a private purpose ("mail from a local mail program has
+    National Language Support extended characters in the body of the mail
+    item"). It sets -x when calling the MTA from its mail command. Exim ignores
+    this option.
+
+-X <logfile>
+
+    This option is interpreted by Sendmail to cause debug information to be
+    sent to the named file. It is ignored by Exim.
+
+-z <log-line>
+
+    This option writes its argument to Exim's logfile. Use is restricted to
+    administrators; the intent is for operational notes. Quotes should be used
+    to maintain a multi-word item as a single argument, under most shells.
+
+
+
+===============================================================================
+6. THE EXIM RUNTIME CONFIGURATION FILE
+
+Exim uses a single runtime configuration file that is read whenever an Exim
+binary is executed. Note that in normal operation, this happens frequently,
+because Exim is designed to operate in a distributed manner, without central
+control.
+
+If a syntax error is detected while reading the configuration file, Exim writes
+a message on the standard error, and exits with a non-zero return code. The
+message is also written to the panic log. Note: Only simple syntax errors can
+be detected at this time. The values of any expanded options are not checked
+until the expansion happens, even when the expansion does not actually alter
+the string.
+
+The name of the configuration file is compiled into the binary for security
+reasons, and is specified by the CONFIGURE_FILE compilation option. In most
+configurations, this specifies a single file. However, it is permitted to give
+a colon-separated list of filenames, in which case Exim uses the first existing
+file in the list.
+
+The runtime configuration file must be owned by root or by the user that is
+specified at compile time by the CONFIGURE_OWNER option (if set). The
+configuration file must not be world-writeable, or group-writeable unless its
+group is the root group or the one specified at compile time by the
+CONFIGURE_GROUP option.
+
+Warning: In a conventional configuration, where the Exim binary is setuid to
+root, anybody who is able to edit the runtime configuration file has an easy
+way to run commands as root. If you specify a user or group in the
+CONFIGURE_OWNER or CONFIGURE_GROUP options, then that user and/or any users who
+are members of that group will trivially be able to obtain root privileges.
+
+Up to Exim version 4.72, the runtime configuration file was also permitted to
+be writeable by the Exim user and/or group. That has been changed in Exim 4.73
+since it offered a simple privilege escalation for any attacker who managed to
+compromise the Exim user account.
+
+A default configuration file, which will work correctly in simple situations,
+is provided in the file src/configure.default. If CONFIGURE_FILE defines just
+one filename, the installation process copies the default configuration to a
+new file of that name if it did not previously exist. If CONFIGURE_FILE is a
+list, no default is automatically installed. Chapter 7 is a "walk-through"
+discussion of the default configuration.
+
+
+6.1 Using a different configuration file
+----------------------------------------
+
+A one-off alternate configuration can be specified by the -C command line
+option, which may specify a single file or a list of files. However, when -C is
+used, Exim gives up its root privilege, unless called by root (or unless the
+argument for -C is identical to the built-in value from CONFIGURE_FILE), or is
+listed in the TRUSTED_CONFIG_LIST file and the caller is the Exim user or the
+user specified in the CONFIGURE_OWNER setting. -C is useful mainly for checking
+the syntax of configuration files before installing them. No owner or group
+checks are done on a configuration file specified by -C, if root privilege has
+been dropped.
+
+Even the Exim user is not trusted to specify an arbitrary configuration file
+with the -C option to be used with root privileges, unless that file is listed
+in the TRUSTED_CONFIG_LIST file. This locks out the possibility of testing a
+configuration using -C right through message reception and delivery, even if
+the caller is root. The reception works, but by that time, Exim is running as
+the Exim user, so when it re-execs to regain privilege for the delivery, the
+use of -C causes privilege to be lost. However, root can test reception and
+delivery using two separate commands (one to put a message in the queue, using 
+-odq, and another to do the delivery, using -M).
+
+If ALT_CONFIG_PREFIX is defined in Local/Makefile, it specifies a prefix string
+with which any file named in a -C command line option must start. In addition,
+the filename must not contain the sequence "/../". There is no default setting
+for ALT_CONFIG_PREFIX; when it is unset, any filename can be used with -C.
+
+One-off changes to a configuration can be specified by the -D command line
+option, which defines and overrides values for macros used inside the
+configuration file. However, like -C, the use of this option by a
+non-privileged user causes Exim to discard its root privilege. If
+DISABLE_D_OPTION is defined in Local/Makefile, the use of -D is completely
+disabled, and its use causes an immediate error exit.
+
+The WHITELIST_D_MACROS option in Local/Makefile permits the binary builder to
+declare certain macro names trusted, such that root privilege will not
+necessarily be discarded. WHITELIST_D_MACROS defines a colon-separated list of
+macros which are considered safe and, if -D only supplies macros from this
+list, and the values are acceptable, then Exim will not give up root privilege
+if the caller is root, the Exim run-time user, or the CONFIGURE_OWNER, if set.
+This is a transition mechanism and is expected to be removed in the future.
+Acceptable values for the macros satisfy the regexp: "^[A-Za-z0-9_/.-]*$"
+
+Some sites may wish to use the same Exim binary on different machines that
+share a file system, but to use different configuration files on each machine.
+If CONFIGURE_FILE_USE_NODE is defined in Local/Makefile, Exim first looks for a
+file whose name is the configuration filename followed by a dot and the
+machine's node name, as obtained from the uname() function. If this file does
+not exist, the standard name is tried. This processing occurs for each filename
+in the list given by CONFIGURE_FILE or -C.
+
+In some esoteric situations different versions of Exim may be run under
+different effective uids and the CONFIGURE_FILE_USE_EUID is defined to help
+with this. See the comments in src/EDITME for details.
+
+
+6.2 Configuration file format
+-----------------------------
+
+Exim's configuration file is divided into a number of different parts. General
+option settings must always appear at the start of the file. The other parts
+are all optional, and may appear in any order. Each part other than the first
+is introduced by the word "begin" followed by at least one literal space, and
+the name of the part. The optional parts are:
+
+  * ACL: Access control lists for controlling incoming SMTP mail (see chapter
+    44).
+
+  * authenticators: Configuration settings for the authenticator drivers. These
+    are concerned with the SMTP AUTH command (see chapter 33).
+
+  * routers: Configuration settings for the router drivers. Routers process
+    addresses and determine how the message is to be delivered (see chapters 15
+    -22).
+
+  * transports: Configuration settings for the transport drivers. Transports
+    define mechanisms for copying messages to destinations (see chapters 24-30
+    ).
+
+  * retry: Retry rules, for use when a message cannot be delivered immediately.
+    If there is no retry section, or if it is empty (that is, no retry rules
+    are defined), Exim will not retry deliveries. In this situation, temporary
+    errors are treated the same as permanent errors. Retry rules are discussed
+    in chapter 32.
+
+  * rewrite: Global address rewriting rules, for use when a message arrives and
+    when new addresses are generated during delivery. Rewriting is discussed in
+    chapter 31.
+
+  * local_scan: Private options for the local_scan() function. If you want to
+    use this feature, you must set
+
+    LOCAL_SCAN_HAS_OPTIONS=yes
+
+    in Local/Makefile before building Exim. Details of the local_scan()
+    facility are given in chapter 46.
+
+Leading and trailing white space in configuration lines is always ignored.
+
+Blank lines in the file, and lines starting with a # character (ignoring
+leading white space) are treated as comments and are ignored. Note: A #
+character other than at the beginning of a line is not treated specially, and
+does not introduce a comment.
+
+Any non-comment line can be continued by ending it with a backslash. Note that
+the general rule for white space means that trailing white space after the
+backslash and leading white space at the start of continuation lines is
+ignored. Comment lines beginning with # (but not empty lines) may appear in the
+middle of a sequence of continuation lines.
+
+A convenient way to create a configuration file is to start from the default,
+which is supplied in src/configure.default, and add, delete, or change settings
+as required.
+
+The ACLs, retry rules, and rewriting rules have their own syntax which is
+described in chapters 44, 32, and 31, respectively. The other parts of the
+configuration file have some syntactic items in common, and these are described
+below, from section 6.11 onwards. Before that, the inclusion, macro, and
+conditional facilities are described.
+
+
+6.3 File inclusions in the configuration file
+---------------------------------------------
+
+You can include other files inside Exim's runtime configuration file by using
+this syntax:
+
+.include <filename>
+.include_if_exists <filename>
+
+on a line by itself. Double quotes round the filename are optional. If you use
+the first form, a configuration error occurs if the file does not exist; the
+second form does nothing for non-existent files. The first form allows a
+relative name. It is resolved relative to the directory of the including file.
+For the second form an absolute filename is required.
+
+Includes may be nested to any depth, but remember that Exim reads its
+configuration file often, so it is a good idea to keep them to a minimum. If
+you change the contents of an included file, you must HUP the daemon, because
+an included file is read only when the configuration itself is read.
+
+The processing of inclusions happens early, at a physical line level, so, like
+comment lines, an inclusion can be used in the middle of an option setting, for
+example:
+
+hosts_lookup = a.b.c \
+               .include /some/file
+
+Include processing happens after macro processing (see below). Its effect is to
+process the lines of the included file as if they occurred inline where the
+inclusion appears.
+
+
+6.4 Macros in the configuration file
+------------------------------------
+
+If a line in the main part of the configuration (that is, before the first
+"begin" line) begins with an upper case letter, it is taken as a macro
+definition, and must be of the form
+
+<name> = <rest of line>
+
+The name must consist of letters, digits, and underscores, and need not all be
+in upper case, though that is recommended. The rest of the line, including any
+continuations, is the replacement text, and has leading and trailing white
+space removed. Quotes are not removed. The replacement text can never end with
+a backslash character, but this doesn't seem to be a serious limitation.
+
+Macros may also be defined between router, transport, authenticator, or ACL
+definitions. They may not, however, be defined within an individual driver or
+ACL, or in the local_scan, retry, or rewrite sections of the configuration.
+
+
+6.5 Macro substitution
+----------------------
+
+Once a macro is defined, all subsequent lines in the file (and any included
+files) are scanned for the macro name; if there are several macros, the line is
+scanned for each, in turn, in the order in which the macros are defined. The
+replacement text is not re-scanned for the current macro, though it is scanned
+for subsequently defined macros. For this reason, a macro name may not contain
+the name of a previously defined macro as a substring. You could, for example,
+define
+
+ABCD_XYZ = <something>
+ABCD = <something else>
+
+but putting the definitions in the opposite order would provoke a configuration
+error. Macro expansion is applied to individual physical lines from the file,
+before checking for line continuation or file inclusion (see above). If a line
+consists solely of a macro name, and the expansion of the macro is empty, the
+line is ignored. A macro at the start of a line may turn the line into a
+comment line or a ".include" line.
+
+
+6.6 Redefining macros
+---------------------
+
+Once defined, the value of a macro can be redefined later in the configuration
+(or in an included file). Redefinition is specified by using == instead of =.
+For example:
+
+MAC =  initial value
+...
+MAC == updated value
+
+Redefinition does not alter the order in which the macros are applied to the
+subsequent lines of the configuration file. It is still the same order in which
+the macros were originally defined. All that changes is the macro's value.
+Redefinition makes it possible to accumulate values. For example:
+
+MAC =  initial value
+...
+MAC == MAC and something added
+
+This can be helpful in situations where the configuration file is built from a
+number of other files.
+
+
+6.7 Overriding macro values
+---------------------------
+
+The values set for macros in the configuration file can be overridden by the -D
+command line option, but Exim gives up its root privilege when -D is used,
+unless called by root or the Exim user. A definition on the command line using
+the -D option causes all definitions and redefinitions within the file to be
+ignored.
+
+
+6.8 Example of macro usage
+--------------------------
+
+As an example of macro usage, consider a configuration where aliases are looked
+up in a MySQL database. It helps to keep the file less cluttered if long
+strings such as SQL statements are defined separately as macros, for example:
+
+ALIAS_QUERY = select mailbox from user where \
+              login='${quote_mysql:$local_part}';
+
+This can then be used in a redirect router setting like this:
+
+data = ${lookup mysql{ALIAS_QUERY}}
+
+In earlier versions of Exim macros were sometimes used for domain, host, or
+address lists. In Exim 4 these are handled better by named lists - see section
+10.6.
+
+
+6.9 Builtin macros
+------------------
+
+Exim defines some macros depending on facilities available, which may differ
+due to build-time definitions and from one release to another. All of these
+macros start with an underscore. They can be used to conditionally include
+parts of a configuration (see below).
+
+The following classes of macros are defined:
+
+ _HAVE_*                      build-time defines
+ _DRIVER_ROUTER_*             router drivers
+ _DRIVER_TRANSPORT_*          transport drivers
+ _DRIVER_AUTHENTICATOR_*      authenticator drivers
+ _LOG_*                       log_selector values
+ _OPT_MAIN_*                  main config options
+ _OPT_ROUTERS_*               generic router options
+ _OPT_TRANSPORTS_*            generic transport options
+ _OPT_AUTHENTICATORS_*        generic authenticator options
+ _OPT_ROUTER_*_*              private router options
+ _OPT_TRANSPORT_*_*           private transport options
+ _OPT_AUTHENTICATOR_*_*       private authenticator options
+
+Use an "exim -bP macros" command to get the list of macros.
+
+
+6.10 Conditional skips in the configuration file
+------------------------------------------------
+
+You can use the directives ".ifdef", ".ifndef", ".elifdef", ".elifndef",
+".else", and ".endif" to dynamically include or exclude portions of the
+configuration file. The processing happens whenever the file is read (that is,
+when an Exim binary starts to run).
+
+The implementation is very simple. Instances of the first four directives must
+be followed by text that includes the names of one or macros. The condition
+that is tested is whether or not any macro substitution has taken place in the
+line. Thus:
+
+.ifdef AAA
+message_size_limit = 50M
+.else
+message_size_limit = 100M
+.endif
+
+sets a message size limit of 50M if the macro "AAA" is defined (or "A" or
+"AA"), and 100M otherwise. If there is more than one macro named on the line,
+the condition is true if any of them are defined. That is, it is an "or"
+condition. To obtain an "and" condition, you need to use nested ".ifdef"s.
+
+Although you can use a macro expansion to generate one of these directives, it
+is not very useful, because the condition "there was a macro substitution in
+this line" will always be true.
+
+Text following ".else" and ".endif" is ignored, and can be used as comment to
+clarify complicated nestings.
+
+
+6.11 Common option syntax
+-------------------------
+
+For the main set of options, driver options, and local_scan() options, each
+setting is on a line by itself, and starts with a name consisting of lower-case
+letters and underscores. Many options require a data value, and in these cases
+the name must be followed by an equals sign (with optional white space) and
+then the value. For example:
+
+qualify_domain = mydomain.example.com
+
+Some option settings may contain sensitive data, for example, passwords for
+accessing databases. To stop non-admin users from using the -bP command line
+option to read these values, you can precede the option settings with the word
+"hide". For example:
+
+hide mysql_servers = localhost/users/admin/secret-password
+
+For non-admin users, such options are displayed like this:
+
+mysql_servers = <value not displayable>
+
+If "hide" is used on a driver option, it hides the value of that option on all
+instances of the same driver.
+
+The following sections describe the syntax used for the different data types
+that are found in option settings.
+
+
+6.12 Boolean options
+--------------------
+
+Options whose type is given as boolean are on/off switches. There are two
+different ways of specifying such options: with and without a data value. If
+the option name is specified on its own without data, the switch is turned on;
+if it is preceded by "no_" or "not_" the switch is turned off. However, boolean
+options may be followed by an equals sign and one of the words "true", "false",
+"yes", or "no", as an alternative syntax. For example, the following two
+settings have exactly the same effect:
+
+queue_only
+queue_only = true
+
+The following two lines also have the same (opposite) effect:
+
+no_queue_only
+queue_only = false
+
+You can use whichever syntax you prefer.
+
+
+6.13 Integer values
+-------------------
+
+If an option's type is given as "integer", the value can be given in decimal,
+hexadecimal, or octal. If it starts with a digit greater than zero, a decimal
+number is assumed. Otherwise, it is treated as an octal number unless it starts
+with the characters "0x", in which case the remainder is interpreted as a
+hexadecimal number.
+
+If an integer value is followed by the letter K, it is multiplied by 1024; if
+it is followed by the letter M, it is multiplied by 1024x1024; if by the letter
+G, 1024x1024x1024. When the values of integer option settings are output,
+values which are an exact multiple of 1024 or 1024x1024 are sometimes, but not
+always, printed using the letters K and M. The printing style is independent of
+the actual input format that was used.
+
+
+6.14 Octal integer values
+-------------------------
+
+If an option's type is given as "octal integer", its value is always
+interpreted as an octal number, whether or not it starts with the digit zero.
+Such options are always output in octal.
+
+
+6.15 Fixed point numbers
+------------------------
+
+If an option's type is given as "fixed-point", its value must be a decimal
+integer, optionally followed by a decimal point and up to three further digits.
+
+
+6.16 Time intervals
+-------------------
+
+A time interval is specified as a sequence of numbers, each followed by one of
+the following letters, with no intervening white space:
+
+    s seconds
+    m minutes
+    h hours
+    d days
+    w weeks
+
+For example, "3h50m" specifies 3 hours and 50 minutes. The values of time
+intervals are output in the same format. Exim does not restrict the values; it
+is perfectly acceptable, for example, to specify "90m" instead of "1h30m".
+
+
+6.17 String values
+------------------
+
+If an option's type is specified as "string", the value can be specified with
+or without double-quotes. If it does not start with a double-quote, the value
+consists of the remainder of the line plus any continuation lines, starting at
+the first character after any leading white space, with trailing white space
+removed, and with no interpretation of the characters in the string. Because
+Exim removes comment lines (those beginning with #) at an early stage, they can
+appear in the middle of a multi-line string. The following two settings are
+therefore equivalent:
+
+trusted_users = uucp:mail
+trusted_users = uucp:\
+                # This comment line is ignored
+                mail
+
+If a string does start with a double-quote, it must end with a closing
+double-quote, and any backslash characters other than those used for line
+continuation are interpreted as escape characters, as follows:
+
+    "\\"              single backslash
+    "\n"              newline
+    "\r"              carriage return
+    "\t"              tab
+    "\"<octal digits> up to 3 octal digits specify one character
+    "\x"<hex digits>  up to 2 hexadecimal digits specify one character
+
+If a backslash is followed by some other character, including a double-quote
+character, that character replaces the pair.
+
+Quoting is necessary only if you want to make use of the backslash escapes to
+insert special characters, or if you need to specify a value with leading or
+trailing spaces. These cases are rare, so quoting is almost never needed in
+current versions of Exim. In versions of Exim before 3.14, quoting was required
+in order to continue lines, so you may come across older configuration files
+and examples that apparently quote unnecessarily.
+
+
+6.18 Expanded strings
+---------------------
+
+Some strings in the configuration file are subjected to string expansion, by
+which means various parts of the string may be changed according to the
+circumstances (see chapter 11). The input syntax for such strings is as just
+described; in particular, the handling of backslashes in quoted strings is done
+as part of the input process, before expansion takes place. However, backslash
+is also an escape character for the expander, so any backslashes that are
+required for that reason must be doubled if they are within a quoted
+configuration string.
+
+
+6.19 User and group names
+-------------------------
+
+User and group names are specified as strings, using the syntax described
+above, but the strings are interpreted specially. A user or group name must
+either consist entirely of digits, or be a name that can be looked up using the
+getpwnam() or getgrnam() function, as appropriate.
+
+
+6.20 List construction
+----------------------
+
+The data for some configuration options is a list of items, with colon as the
+default separator. Many of these options are shown with type "string list" in
+the descriptions later in this document. Others are listed as "domain list",
+"host list", "address list", or "local part list". Syntactically, they are all
+the same; however, those other than "string list" are subject to particular
+kinds of interpretation, as described in chapter 10.
+
+In all these cases, the entire list is treated as a single string as far as the
+input syntax is concerned. The trusted_users setting in section 6.17 above is
+an example. If a colon is actually needed in an item in a list, it must be
+entered as two colons. Leading and trailing white space on each item in a list
+is ignored. This makes it possible to include items that start with a colon,
+and in particular, certain forms of IPv6 address. For example, the list
+
+local_interfaces = 127.0.0.1 : ::::1
+
+contains two IP addresses, the IPv4 address 127.0.0.1 and the IPv6 address ::1.
+
+Note: Although leading and trailing white space is ignored in individual list
+items, it is not ignored when parsing the list. The spaces around the first
+colon in the example above are necessary. If they were not there, the list
+would be interpreted as the two items 127.0.0.1:: and 1.
+
+
+6.21 Changing list separators
+-----------------------------
+
+Doubling colons in IPv6 addresses is an unwelcome chore, so a mechanism was
+introduced to allow the separator character to be changed. If a list begins
+with a left angle bracket, followed by any punctuation character, that
+character is used instead of colon as the list separator. For example, the list
+above can be rewritten to use a semicolon separator like this:
+
+local_interfaces = <; 127.0.0.1 ; ::1
+
+This facility applies to all lists, with the exception of the list in 
+log_file_path. It is recommended that the use of non-colon separators be
+confined to circumstances where they really are needed.
+
+It is also possible to use newline and other control characters (those with
+code values less than 32, plus DEL) as separators in lists. Such separators
+must be provided literally at the time the list is processed. For options that
+are string-expanded, you can write the separator using a normal escape
+sequence. This will be processed by the expander before the string is
+interpreted as a list. For example, if a newline-separated list of domains is
+generated by a lookup, you can process it directly by a line such as this:
+
+domains = <\n ${lookup mysql{.....}}
+
+This avoids having to change the list separator in such data. You are unlikely
+to want to use a control character as a separator in an option that is not
+expanded, because the value is literal text. However, it can be done by giving
+the value in quotes. For example:
+
+local_interfaces = "<\n 127.0.0.1 \n ::1"
+
+Unlike printing character separators, which can be included in list items by
+doubling, it is not possible to include a control character as data when it is
+set as the separator. Two such characters in succession are interpreted as
+enclosing an empty list item.
+
+
+6.22 Empty items in lists
+-------------------------
+
+An empty item at the end of a list is always ignored. In other words, trailing
+separator characters are ignored. Thus, the list in
+
+senders = user@domain :
+
+contains only a single item. If you want to include an empty string as one item
+in a list, it must not be the last item. For example, this list contains three
+items, the second of which is empty:
+
+senders = user1@domain : : user2@domain
+
+Note: There must be white space between the two colons, as otherwise they are
+interpreted as representing a single colon data character (and the list would
+then contain just one item). If you want to specify a list that contains just
+one, empty item, you can do it as in this example:
+
+senders = :
+
+In this case, the first item is empty, and the second is discarded because it
+is at the end of the list.
+
+
+6.23 Format of driver configurations
+------------------------------------
+
+There are separate parts in the configuration for defining routers, transports,
+and authenticators. In each part, you are defining a number of driver
+instances, each with its own set of options. Each driver instance is defined by
+a sequence of lines like this:
+
+<instance name>:
+  <option>
+  ...
+  <option>
+
+In the following example, the instance name is localuser, and it is followed by
+three options settings:
+
+localuser:
+  driver = accept
+  check_local_user
+  transport = local_delivery
+
+For each driver instance, you specify which Exim code module it uses - by the
+setting of the driver option - and (optionally) some configuration settings.
+For example, in the case of transports, if you want a transport to deliver with
+SMTP you would use the smtp driver; if you want to deliver to a local file you
+would use the appendfile driver. Each of the drivers is described in detail in
+its own separate chapter later in this manual.
+
+You can have several routers, transports, or authenticators that are based on
+the same underlying driver (each must have a different instance name).
+
+The order in which routers are defined is important, because addresses are
+passed to individual routers one by one, in order. The order in which
+transports are defined does not matter at all. The order in which
+authenticators are defined is used only when Exim, as a client, is searching
+them to find one that matches an authentication mechanism offered by the
+server.
+
+Within a driver instance definition, there are two kinds of option: generic and
+private. The generic options are those that apply to all drivers of the same
+type (that is, all routers, all transports or all authenticators). The driver
+option is a generic option that must appear in every definition. The private
+options are special for each driver, and none need appear, because they all
+have default values.
+
+The options may appear in any order, except that the driver option must precede
+any private options, since these depend on the particular driver. For this
+reason, it is recommended that driver always be the first option.
+
+Driver instance names, which are used for reference in log entries and
+elsewhere, can be any sequence of letters, digits, and underscores (starting
+with a letter) and must be unique among drivers of the same type. A router and
+a transport (for example) can each have the same name, but no two router
+instances can have the same name. The name of a driver instance should not be
+confused with the name of the underlying driver module. For example, the
+configuration lines:
+
+remote_smtp:
+  driver = smtp
+
+create an instance of the smtp transport driver whose name is remote_smtp. The
+same driver code can be used more than once, with different instance names and
+different option settings each time. A second instance of the smtp transport,
+with different options, might be defined thus:
+
+special_smtp:
+  driver = smtp
+  port = 1234
+  command_timeout = 10s
+
+The names remote_smtp and special_smtp would be used to reference these
+transport instances from routers, and these names would appear in log lines.
+
+Comment lines may be present in the middle of driver specifications. The full
+list of option settings for any particular driver instance, including all the
+defaulted values, can be extracted by making use of the -bP command line
+option.
+
+
+
+===============================================================================
+7. THE DEFAULT CONFIGURATION FILE
+
+The default configuration file supplied with Exim as src/configure.default is
+sufficient for a host with simple mail requirements. As an introduction to the
+way Exim is configured, this chapter "walks through" the default configuration,
+giving brief explanations of the settings. Detailed descriptions of the options
+are given in subsequent chapters. The default configuration file itself
+contains extensive comments about ways you might want to modify the initial
+settings. However, note that there are many options that are not mentioned at
+all in the default configuration.
+
+
+7.1 Macros
+----------
+
+All macros should be defined before any options.
+
+One macro is specified, but commented out, in the default configuration:
+
+# ROUTER_SMARTHOST=MAIL.HOSTNAME.FOR.CENTRAL.SERVER.EXAMPLE
+
+If all off-site mail is expected to be delivered to a "smarthost", then set the
+hostname here and uncomment the macro. This will affect which router is used
+later on. If this is left commented out, then Exim will perform direct-to-MX
+deliveries using a dnslookup router.
+
+In addition to macros defined here, Exim includes a number of built-in macros
+to enable configuration to be guarded by a binary built with support for a
+given feature. See section 6.9 for more details.
+
+
+7.2 Main configuration settings
+-------------------------------
+
+The main (global) configuration option settings section must always come first
+in the file, after the macros. The first thing you'll see in the file, after
+some initial comments, is the line
+
+# primary_hostname =
+
+This is a commented-out setting of the primary_hostname option. Exim needs to
+know the official, fully qualified name of your host, and this is where you can
+specify it. However, in most cases you do not need to set this option. When it
+is unset, Exim uses the uname() system function to obtain the host name.
+
+The first three non-comment configuration lines are as follows:
+
+domainlist local_domains    = @
+domainlist relay_to_domains =
+hostlist   relay_from_hosts = 127.0.0.1
+
+These are not, in fact, option settings. They are definitions of two named
+domain lists and one named host list. Exim allows you to give names to lists of
+domains, hosts, and email addresses, in order to make it easier to manage the
+configuration file (see section 10.6).
+
+The first line defines a domain list called local_domains; this is used later
+in the configuration to identify domains that are to be delivered on the local
+host.
+
+There is just one item in this list, the string "@". This is a special form of
+entry which means "the name of the local host". Thus, if the local host is
+called a.host.example, mail to any.user@a.host.example is expected to be
+delivered locally. Because the local host's name is referenced indirectly, the
+same configuration file can be used on different hosts.
+
+The second line defines a domain list called relay_to_domains, but the list
+itself is empty. Later in the configuration we will come to the part that
+controls mail relaying through the local host; it allows relaying to any
+domains in this list. By default, therefore, no relaying on the basis of a mail
+domain is permitted.
+
+The third line defines a host list called relay_from_hosts. This list is used
+later in the configuration to permit relaying from any host or IP address that
+matches the list. The default contains just the IP address of the IPv4 loopback
+interface, which means that processes on the local host are able to submit mail
+for relaying by sending it over TCP/IP to that interface. No other hosts are
+permitted to submit messages for relaying.
+
+Just to be sure there's no misunderstanding: at this point in the configuration
+we aren't actually setting up any controls. We are just defining some domains
+and hosts that will be used in the controls that are specified later.
+
+The next two configuration lines are genuine option settings:
+
+acl_smtp_rcpt = acl_check_rcpt
+acl_smtp_data = acl_check_data
+
+These options specify Access Control Lists (ACLs) that are to be used during an
+incoming SMTP session for every recipient of a message (every RCPT command),
+and after the contents of the message have been received, respectively. The
+names of the lists are acl_check_rcpt and acl_check_data, and we will come to
+their definitions below, in the ACL section of the configuration. The RCPT ACL
+controls which recipients are accepted for an incoming message - if a
+configuration does not provide an ACL to check recipients, no SMTP mail can be
+accepted. The DATA ACL allows the contents of a message to be checked.
+
+Two commented-out option settings are next:
+
+# av_scanner = clamd:/tmp/clamd
+# spamd_address = 127.0.0.1 783
+
+These are example settings that can be used when Exim is compiled with the
+content-scanning extension. The first specifies the interface to the virus
+scanner, and the second specifies the interface to SpamAssassin. Further
+details are given in chapter 45.
+
+Three more commented-out option settings follow:
+
+# tls_advertise_hosts = *
+# tls_certificate = /etc/ssl/exim.crt
+# tls_privatekey = /etc/ssl/exim.pem
+
+These are example settings that can be used when Exim is compiled with support
+for TLS (aka SSL) as described in section 4.7. The first one specifies the list
+of clients that are allowed to use TLS when connecting to this server; in this
+case, the wildcard means all clients. The other options specify where Exim
+should find its TLS certificate and private key, which together prove the
+server's identity to any clients that connect. More details are given in
+chapter 43.
+
+Another two commented-out option settings follow:
+
+# daemon_smtp_ports = 25 : 465 : 587
+# tls_on_connect_ports = 465
+
+These options provide better support for roaming users who wish to use this
+server for message submission. They are not much use unless you have turned on
+TLS (as described in the previous paragraph) and authentication (about which
+more in section 7.8). Mail submission from mail clients (MUAs) should be
+separate from inbound mail to your domain (MX delivery) for various good
+reasons (eg, ability to impose much saner TLS protocol and ciphersuite
+requirements without unintended consequences). RFC 6409 (previously 4409)
+specifies use of port 587 for SMTP Submission, which uses STARTTLS, so this is
+the "submission" port. RFC 8314 specifies use of port 465 as the "submissions"
+protocol, which should be used in preference to 587. You should also consider
+deploying SRV records to help clients find these ports. Older names for
+"submissions" are "smtps" and "ssmtp".
+
+Two more commented-out options settings follow:
+
+# qualify_domain =
+# qualify_recipient =
+
+The first of these specifies a domain that Exim uses when it constructs a
+complete email address from a local login name. This is often needed when Exim
+receives a message from a local process. If you do not set qualify_domain, the
+value of primary_hostname is used. If you set both of these options, you can
+have different qualification domains for sender and recipient addresses. If you
+set only the first one, its value is used in both cases.
+
+The following line must be uncommented if you want Exim to recognize addresses
+of the form user@[10.11.12.13] that is, with a "domain literal" (an IP address
+within square brackets) instead of a named domain.
+
+# allow_domain_literals
+
+The RFCs still require this form, but many people think that in the modern
+Internet it makes little sense to permit mail to be sent to specific hosts by
+quoting their IP addresses. This ancient format has been used by people who try
+to abuse hosts by using them for unwanted relaying. However, some people
+believe there are circumstances (for example, messages addressed to postmaster)
+where domain literals are still useful.
+
+The next configuration line is a kind of trigger guard:
+
+never_users = root
+
+It specifies that no delivery must ever be run as the root user. The normal
+convention is to set up root as an alias for the system administrator. This
+setting is a guard against slips in the configuration. The list of users
+specified by never_users is not, however, the complete list; the build-time
+configuration in Local/Makefile has an option called FIXED_NEVER_USERS
+specifying a list that cannot be overridden. The contents of never_users are
+added to this list. By default FIXED_NEVER_USERS also specifies root.
+
+When a remote host connects to Exim in order to send mail, the only information
+Exim has about the host's identity is its IP address. The next configuration
+line,
+
+host_lookup = *
+
+specifies that Exim should do a reverse DNS lookup on all incoming connections,
+in order to get a host name. This improves the quality of the logging
+information, but if you feel it is too expensive, you can remove it entirely,
+or restrict the lookup to hosts on "nearby" networks. Note that it is not
+always possible to find a host name from an IP address, because not all DNS
+reverse zones are maintained, and sometimes DNS servers are unreachable.
+
+The next two lines are concerned with ident callbacks, as defined by RFC 1413
+(hence their names):
+
+rfc1413_hosts = *
+rfc1413_query_timeout = 0s
+
+These settings cause Exim to avoid ident callbacks for all incoming SMTP calls.
+Few hosts offer RFC1413 service these days; calls have to be terminated by a
+timeout and this needlessly delays the startup of an incoming SMTP connection.
+If you have hosts for which you trust RFC1413 and need this information, you
+can change this.
+
+This line enables an efficiency SMTP option. It is negotiated by clients and
+not expected to cause problems but can be disabled if needed.
+
+prdr_enable = true
+
+When Exim receives messages over SMTP connections, it expects all addresses to
+be fully qualified with a domain, as required by the SMTP definition. However,
+if you are running a server to which simple clients submit messages, you may
+find that they send unqualified addresses. The two commented-out options:
+
+# sender_unqualified_hosts =
+# recipient_unqualified_hosts =
+
+show how you can specify hosts that are permitted to send unqualified sender
+and recipient addresses, respectively.
+
+The log_selector option is used to increase the detail of logging over the
+default:
+
+log_selector = +smtp_protocol_error +smtp_syntax_error \
+               +tls_certificate_verified
+
+The percent_hack_domains option is also commented out:
+
+# percent_hack_domains =
+
+It provides a list of domains for which the "percent hack" is to operate. This
+is an almost obsolete form of explicit email routing. If you do not know
+anything about it, you can safely ignore this topic.
+
+The next two settings in the main part of the default configuration are
+concerned with messages that have been "frozen" on Exim's queue. When a message
+is frozen, Exim no longer continues to try to deliver it. Freezing occurs when
+a bounce message encounters a permanent failure because the sender address of
+the original message that caused the bounce is invalid, so the bounce cannot be
+delivered. This is probably the most common case, but there are also other
+conditions that cause freezing, and frozen messages are not always bounce
+messages.
+
+ignore_bounce_errors_after = 2d
+timeout_frozen_after = 7d
+
+The first of these options specifies that failing bounce messages are to be
+discarded after 2 days in the queue. The second specifies that any frozen
+message (whether a bounce message or not) is to be timed out (and discarded)
+after a week. In this configuration, the first setting ensures that no failing
+bounce message ever lasts a week.
+
+Exim queues it's messages in a spool directory. If you expect to have large
+queues, you may consider using this option. It splits the spool directory into
+subdirectories to avoid file system degradation from many files in a single
+directory, resulting in better performance. Manual manipulation of queued
+messages becomes more complex (though fortunately not often needed).
+
+# split_spool_directory = true
+
+In an ideal world everybody follows the standards. For non-ASCII messages RFC
+2047 is a standard, allowing a maximum line length of 76 characters. Exim
+adheres that standard and won't process messages which violate this standard.
+(Even ${rfc2047:...} expansions will fail.) In particular, the Exim maintainers
+have had multiple reports of problems from Russian administrators of issues
+until they disable this check, because of some popular, yet buggy, mail
+composition software.
+
+# check_rfc2047_length = false
+
+If you need to be strictly RFC compliant you may wish to disable the 8BITMIME
+advertisement. Use this, if you exchange mails with systems that are not 8-bit
+clean.
+
+# accept_8bitmime = false
+
+Libraries you use may depend on specific environment settings. This imposes a
+security risk (e.g. PATH). There are two lists: keep_environment for the
+variables to import as they are, and add_environment for variables we want to
+set to a fixed value. Note that TZ is handled separately, by the timezone
+runtime option and by the TIMEZONE_DEFAULT buildtime option.
+
+# keep_environment = ^LDAP
+# add_environment = PATH=/usr/bin::/bin
+
+
+7.3 ACL configuration
+---------------------
+
+In the default configuration, the ACL section follows the main configuration.
+It starts with the line
+
+begin acl
+
+and it contains the definitions of two ACLs, called acl_check_rcpt and 
+acl_check_data, that were referenced in the settings of acl_smtp_rcpt and 
+acl_smtp_data above.
+
+The first ACL is used for every RCPT command in an incoming SMTP message. Each
+RCPT command specifies one of the message's recipients. The ACL statements are
+considered in order, until the recipient address is either accepted or
+rejected. The RCPT command is then accepted or rejected, according to the
+result of the ACL processing.
+
+acl_check_rcpt:
+
+This line, consisting of a name terminated by a colon, marks the start of the
+ACL, and names it.
+
+accept  hosts = :
+
+This ACL statement accepts the recipient if the sending host matches the list.
+But what does that strange list mean? It doesn't actually contain any host
+names or IP addresses. The presence of the colon puts an empty item in the
+list; Exim matches this only if the incoming message did not come from a remote
+host, because in that case, the remote hostname is empty. The colon is
+important. Without it, the list itself is empty, and can never match anything.
+
+What this statement is doing is to accept unconditionally all recipients in
+messages that are submitted by SMTP from local processes using the standard
+input and output (that is, not using TCP/IP). A number of MUAs operate in this
+manner.
+
+deny    domains       = +local_domains
+        local_parts   = ^[.] : ^.*[@%!/|]
+        message       = Restricted characters in address
+
+deny    domains       = !+local_domains
+        local_parts   = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
+        message       = Restricted characters in address
+
+These statements are concerned with local parts that contain any of the
+characters "@", "%", "!", "/", "|", or dots in unusual places. Although these
+characters are entirely legal in local parts (in the case of "@" and leading
+dots, only if correctly quoted), they do not commonly occur in Internet mail
+addresses.
+
+The first three have in the past been associated with explicitly routed
+addresses (percent is still sometimes used - see the percent_hack_domains
+option). Addresses containing these characters are regularly tried by spammers
+in an attempt to bypass relaying restrictions, and also by open relay testing
+programs. Unless you really need them it is safest to reject these characters
+at this early stage. This configuration is heavy-handed in rejecting these
+characters for all messages it accepts from remote hosts. This is a deliberate
+policy of being as safe as possible.
+
+The first rule above is stricter, and is applied to messages that are addressed
+to one of the local domains handled by this host. This is implemented by the
+first condition, which restricts it to domains that are listed in the 
+local_domains domain list. The "+" character is used to indicate a reference to
+a named list. In this configuration, there is just one domain in local_domains,
+but in general there may be many.
+
+The second condition on the first statement uses two regular expressions to
+block local parts that begin with a dot or contain "@", "%", "!", "/", or "|".
+If you have local accounts that include these characters, you will have to
+modify this rule.
+
+Empty components (two dots in a row) are not valid in RFC 2822, but Exim allows
+them because they have been encountered in practice. (Consider the common
+convention of local parts constructed as "
+first-initial.second-initial.family-name" when applied to someone like the
+author of Exim, who has no second initial.) However, a local part starting with
+a dot or containing "/../" can cause trouble if it is used as part of a
+filename (for example, for a mailing list). This is also true for local parts
+that contain slashes. A pipe symbol can also be troublesome if the local part
+is incorporated unthinkingly into a shell command line.
+
+The second rule above applies to all other domains, and is less strict. This
+allows your own users to send outgoing messages to sites that use slashes and
+vertical bars in their local parts. It blocks local parts that begin with a
+dot, slash, or vertical bar, but allows these characters within the local part.
+However, the sequence "/../" is barred. The use of "@", "%", and "!" is
+blocked, as before. The motivation here is to prevent your users (or your
+users' viruses) from mounting certain kinds of attack on remote sites.
+
+accept  local_parts   = postmaster
+        domains       = +local_domains
+
+This statement, which has two conditions, accepts an incoming address if the
+local part is postmaster and the domain is one of those listed in the 
+local_domains domain list. The "+" character is used to indicate a reference to
+a named list. In this configuration, there is just one domain in local_domains,
+but in general there may be many.
+
+The presence of this statement means that mail to postmaster is never blocked
+by any of the subsequent tests. This can be helpful while sorting out problems
+in cases where the subsequent tests are incorrectly denying access.
+
+require verify        = sender
+
+This statement requires the sender address to be verified before any subsequent
+ACL statement can be used. If verification fails, the incoming recipient
+address is refused. Verification consists of trying to route the address, to
+see if a bounce message could be delivered to it. In the case of remote
+addresses, basic verification checks only the domain, but callouts can be used
+for more verification if required. Section 44.45 discusses the details of
+address verification.
+
+accept  hosts         = +relay_from_hosts
+        control       = submission
+
+This statement accepts the address if the message is coming from one of the
+hosts that are defined as being allowed to relay through this host. Recipient
+verification is omitted here, because in many cases the clients are dumb MUAs
+that do not cope well with SMTP error responses. For the same reason, the
+second line specifies "submission mode" for messages that are accepted. This is
+described in detail in section 48.1; it causes Exim to fix messages that are
+deficient in some way, for example, because they lack a Date: header line. If
+you are actually relaying out from MTAs, you should probably add recipient
+verification here, and disable submission mode.
+
+accept  authenticated = *
+        control       = submission
+
+This statement accepts the address if the client host has authenticated itself.
+Submission mode is again specified, on the grounds that such messages are most
+likely to come from MUAs. The default configuration does not define any
+authenticators, though it does include some nearly complete commented-out
+examples described in 7.8. This means that no client can in fact authenticate
+until you complete the authenticator definitions.
+
+require message = relay not permitted
+        domains = +local_domains : +relay_to_domains
+
+This statement rejects the address if its domain is neither a local domain nor
+one of the domains for which this host is a relay.
+
+require verify = recipient
+
+This statement requires the recipient address to be verified; if verification
+fails, the address is rejected.
+
+# deny    dnslists    = black.list.example
+#         message     = rejected because $sender_host_address \
+#                       is in a black list at $dnslist_domain\n\
+#                       $dnslist_text
+#
+# warn    dnslists    = black.list.example
+#         add_header  = X-Warning: $sender_host_address is in \
+#                       a black list at $dnslist_domain
+#         log_message = found in $dnslist_domain
+
+These commented-out lines are examples of how you could configure Exim to check
+sending hosts against a DNS black list. The first statement rejects messages
+from blacklisted hosts, whereas the second just inserts a warning header line.
+
+# require verify = csa
+
+This commented-out line is an example of how you could turn on client SMTP
+authorization (CSA) checking. Such checks do DNS lookups for special SRV
+records.
+
+accept
+
+The final statement in the first ACL unconditionally accepts any recipient
+address that has successfully passed all the previous tests.
+
+acl_check_data:
+
+This line marks the start of the second ACL, and names it. Most of the contents
+of this ACL are commented out:
+
+# deny    malware   = *
+#         message   = This message contains a virus \
+#                     ($malware_name).
+
+These lines are examples of how to arrange for messages to be scanned for
+viruses when Exim has been compiled with the content-scanning extension, and a
+suitable virus scanner is installed. If the message is found to contain a
+virus, it is rejected with the given custom error message.
+
+# warn    spam      = nobody
+#         message   = X-Spam_score: $spam_score\n\
+#                     X-Spam_score_int: $spam_score_int\n\
+#                     X-Spam_bar: $spam_bar\n\
+#                     X-Spam_report: $spam_report
+
+These lines are an example of how to arrange for messages to be scanned by
+SpamAssassin when Exim has been compiled with the content-scanning extension,
+and SpamAssassin has been installed. The SpamAssassin check is run with
+"nobody" as its user parameter, and the results are added to the message as a
+series of extra header line. In this case, the message is not rejected,
+whatever the spam score.
+
+accept
+
+This final line in the DATA ACL accepts the message unconditionally.
+
+
+7.4 Router configuration
+------------------------
+
+The router configuration comes next in the default configuration, introduced by
+the line
+
+begin routers
+
+Routers are the modules in Exim that make decisions about where to send
+messages. An address is passed to each router, in turn, until it is either
+accepted, or failed. This means that the order in which you define the routers
+matters. Each router is fully described in its own chapter later in this
+manual. Here we give only brief overviews.
+
+# domain_literal:
+#   driver = ipliteral
+#   domains = !+local_domains
+#   transport = remote_smtp
+
+This router is commented out because the majority of sites do not want to
+support domain literal addresses (those of the form user@[10.9.8.7]). If you
+uncomment this router, you also need to uncomment the setting of 
+allow_domain_literals in the main part of the configuration.
+
+Which router is used next depends upon whether or not the ROUTER_SMARTHOST
+macro has been defined, per
+
+.ifdef ROUTER_SMARTHOST
+smarthost:
+#...
+.else
+dnslookup:
+#...
+.endif
+
+If ROUTER_SMARTHOST has been defined, either at the top of the file or on the
+command-line, then we route all non-local mail to that smarthost; otherwise,
+we'll perform DNS lookups for direct-to-MX lookup. Any mail which is to a local
+domain will skip these routers because of the domains option.
+
+smarthost:
+  driver = manualroute
+  domains = ! +local_domains
+  transport = smarthost_smtp
+  route_data = ROUTER_SMARTHOST
+  ignore_target_hosts = <; 0.0.0.0 ; 127.0.0.0/8 ; ::1
+  no_more
+
+This router only handles mail which is not to any local domains; this is
+specified by the line
+
+domains = ! +local_domains
+
+The domains option lists the domains to which this router applies, but the
+exclamation mark is a negation sign, so the router is used only for domains
+that are not in the domain list called local_domains (which was defined at the
+start of the configuration). The plus sign before local_domains indicates that
+it is referring to a named list. Addresses in other domains are passed on to
+the following routers.
+
+The name of the router driver is manualroute because we are manually specifying
+how mail should be routed onwards, instead of using DNS MX. While the name of
+this router instance is arbitrary, the driver option must be one of the driver
+modules that is in the Exim binary.
+
+With no pre-conditions other than domains, all mail for non-local domains will
+be handled by this router, and the no_more setting will ensure that no other
+routers will be used for messages matching the pre-conditions. See 3.12 for
+more on how the pre-conditions apply. For messages which are handled by this
+router, we provide a hostname to deliver to in route_data and the macro
+supplies the value; the address is then queued for the smarthost_smtp
+transport.
+
+dnslookup:
+  driver = dnslookup
+  domains = ! +local_domains
+  transport = remote_smtp
+  ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8
+  no_more
+
+The domains option behaves as per smarthost, above.
+
+The name of the router driver is dnslookup, and is specified by the driver
+option. Do not be confused by the fact that the name of this router instance is
+the same as the name of the driver. The instance name is arbitrary, but the
+name set in the driver option must be one of the driver modules that is in the
+Exim binary.
+
+The dnslookup router routes addresses by looking up their domains in the DNS in
+order to obtain a list of hosts to which the address is routed. If the router
+succeeds, the address is queued for the remote_smtp transport, as specified by
+the transport option. If the router does not find the domain in the DNS, no
+further routers are tried because of the no_more setting, so the address fails
+and is bounced.
+
+The ignore_target_hosts option specifies a list of IP addresses that are to be
+entirely ignored. This option is present because a number of cases have been
+encountered where MX records in the DNS point to host names whose IP addresses
+are 0.0.0.0 or are in the 127 subnet (typically 127.0.0.1). Completely ignoring
+these IP addresses causes Exim to fail to route the email address, so it
+bounces. Otherwise, Exim would log a routing problem, and continue to try to
+deliver the message periodically until the address timed out.
+
+system_aliases:
+  driver = redirect
+  allow_fail
+  allow_defer
+  data = ${lookup{$local_part}lsearch{/etc/aliases}}
+# user = exim
+  file_transport = address_file
+  pipe_transport = address_pipe
+
+Control reaches this and subsequent routers only for addresses in the local
+domains. This router checks to see whether the local part is defined as an
+alias in the /etc/aliases file, and if so, redirects it according to the data
+that it looks up from that file. If no data is found for the local part, the
+value of the data option is empty, causing the address to be passed to the next
+router.
+
+/etc/aliases is a conventional name for the system aliases file that is often
+used. That is why it is referenced by from the default configuration file.
+However, you can change this by setting SYSTEM_ALIASES_FILE in Local/Makefile
+before building Exim.
+
+userforward:
+  driver = redirect
+  check_local_user
+# local_part_suffix = +* : -*
+# local_part_suffix_optional
+  file = $home/.forward
+# allow_filter
+  no_verify
+  no_expn
+  check_ancestor
+  file_transport = address_file
+  pipe_transport = address_pipe
+  reply_transport = address_reply
+
+This is the most complicated router in the default configuration. It is another
+redirection router, but this time it is looking for forwarding data set up by
+individual users. The check_local_user setting specifies a check that the local
+part of the address is the login name of a local user. If it is not, the router
+is skipped. The two commented options that follow check_local_user, namely:
+
+# local_part_suffix = +* : -*
+# local_part_suffix_optional
+
+show how you can specify the recognition of local part suffixes. If the first
+is uncommented, a suffix beginning with either a plus or a minus sign, followed
+by any sequence of characters, is removed from the local part and placed in the
+variable $local_part_suffix. The second suffix option specifies that the
+presence of a suffix in the local part is optional. When a suffix is present,
+the check for a local login uses the local part with the suffix removed.
+
+When a local user account is found, the file called .forward in the user's home
+directory is consulted. If it does not exist, or is empty, the router declines.
+Otherwise, the contents of .forward are interpreted as redirection data (see
+chapter 22 for more details).
+
+Traditional .forward files contain just a list of addresses, pipes, or files.
+Exim supports this by default. However, if allow_filter is set (it is commented
+out by default), the contents of the file are interpreted as a set of Exim or
+Sieve filtering instructions, provided the file begins with "#Exim filter" or "
+#Sieve filter", respectively. User filtering is discussed in the separate
+document entitled Exim's interfaces to mail filtering.
+
+The no_verify and no_expn options mean that this router is skipped when
+verifying addresses, or when running as a consequence of an SMTP EXPN command.
+There are two reasons for doing this:
+
+ 1. Whether or not a local user has a .forward file is not really relevant when
+    checking an address for validity; it makes sense not to waste resources
+    doing unnecessary work.
+
+ 2. More importantly, when Exim is verifying addresses or handling an EXPN
+    command during an SMTP session, it is running as the Exim user, not as
+    root. The group is the Exim group, and no additional groups are set up. It
+    may therefore not be possible for Exim to read users' .forward files at
+    this time.
+
+The setting of check_ancestor prevents the router from generating a new address
+that is the same as any previous address that was redirected. (This works round
+a problem concerning a bad interaction between aliasing and forwarding - see
+section 22.5).
+
+The final three option settings specify the transports that are to be used when
+forwarding generates a direct delivery to a file, or to a pipe, or sets up an
+auto-reply, respectively. For example, if a .forward file contains
+
+a.nother@elsewhere.example, /home/spqr/archive
+
+the delivery to /home/spqr/archive is done by running the address_file
+transport.
+
+localuser:
+  driver = accept
+  check_local_user
+# local_part_suffix = +* : -*
+# local_part_suffix_optional
+  transport = local_delivery
+
+The final router sets up delivery into local mailboxes, provided that the local
+part is the name of a local login, by accepting the address and assigning it to
+the local_delivery transport. Otherwise, we have reached the end of the
+routers, so the address is bounced. The commented suffix settings fulfil the
+same purpose as they do for the userforward router.
+
+
+7.5 Transport configuration
+---------------------------
+
+Transports define mechanisms for actually delivering messages. They operate
+only when referenced from routers, so the order in which they are defined does
+not matter. The transports section of the configuration starts with
+
+begin transports
+
+Two remote transports and four local transports are defined.
+
+remote_smtp:
+  driver = smtp
+  message_size_limit = ${if > {$max_received_linelength}{998} {1}{0}}
+.ifdef _HAVE_PRDR
+  hosts_try_prdr = *
+.endif
+
+This transport is used for delivering messages over SMTP connections. The list
+of remote hosts comes from the router. The message_size_limit usage is a hack
+to avoid sending on messages with over-long lines.
+
+The hosts_try_prdr option enables an efficiency SMTP option. It is negotiated
+between client and server and not expected to cause problems but can be
+disabled if needed. The built-in macro _HAVE_PRDR guards the use of the 
+hosts_try_prdr configuration option.
+
+The other remote transport is used when delivering to a specific smarthost with
+whom there must be some kind of existing relationship, instead of the usual
+federated system.
+
+smarthost_smtp:
+  driver = smtp
+  message_size_limit = ${if > {$max_received_linelength}{998} {1}{0}}
+  multi_domain
+  #
+.ifdef _HAVE_TLS
+  # Comment out any of these which you have to, then file a Support
+  # request with your smarthost provider to get things fixed:
+  hosts_require_tls = *
+  tls_verify_hosts = *
+  # As long as tls_verify_hosts is enabled, this this will have no effect,
+  # but if you have to comment it out then this will at least log whether
+  # you succeed or not:
+  tls_try_verify_hosts = *
+  #
+  # The SNI name should match the name which we'll expect to verify;
+  # many mail systems don't use SNI and this doesn't matter, but if it does,
+  # we need to send a name which the remote site will recognize.
+  # This _should_ be the name which the smarthost operators specified as
+  # the hostname for sending your mail to.
+  tls_sni = ROUTER_SMARTHOST
+  #
+.ifdef _HAVE_OPENSSL
+  tls_require_ciphers = HIGH:!aNULL:@STRENGTH
+.endif
+.ifdef _HAVE_GNUTLS
+  tls_require_ciphers = SECURE192:-VERS-SSL3.0:-VERS-TLS1.0:-VERS-TLS1.1
+.endif
+.endif
+.ifdef _HAVE_PRDR
+  hosts_try_prdr = *
+.endif
+
+After the same message_size_limit hack, we then specify that this Transport can
+handle messages to multiple domains in one run. The assumption here is that
+you're routing all non-local mail to the same place and that place is happy to
+take all messages from you as quickly as possible. All other options depend
+upon built-in macros; if Exim was built without TLS support then no other
+options are defined. If TLS is available, then we configure "stronger than
+default" TLS ciphersuites and versions using the tls_require_ciphers option,
+where the value to be used depends upon the library providing TLS. Beyond that,
+the options adopt the stance that you should have TLS support available from
+your smarthost on today's Internet, so we turn on requiring TLS for the mail to
+be delivered, and requiring that the certificate be valid, and match the
+expected hostname. The tls_sni option can be used by service providers to
+select an appropriate certificate to present to you and here we re-use the
+ROUTER_SMARTHOST macro, because that is unaffected by CNAMEs present in DNS.
+You want to specify the hostname which you'll expect to validate for, and that
+should not be subject to insecure tampering via DNS results.
+
+For the hosts_try_prdr option see the previous transport.
+
+All other options are defaulted.
+
+local_delivery:
+  driver = appendfile
+  file = /var/mail/$local_part_data
+  delivery_date_add
+  envelope_to_add
+  return_path_add
+# group = mail
+# mode = 0660
+
+This appendfile transport is used for local delivery to user mailboxes in
+traditional BSD mailbox format.
+
+We prefer to avoid using $local_part directly to define the mailbox filename,
+as it is provided by a potential bad actor. Instead we use $local_part_data,
+the result of looking up $local_part in the user database (done by using 
+check_local_user in the the router).
+
+By default appendfile runs under the uid and gid of the local user, which
+requires the sticky bit to be set on the /var/mail directory. Some systems use
+the alternative approach of running mail deliveries under a particular group
+instead of using the sticky bit. The commented options show how this can be
+done.
+
+Exim adds three headers to the message as it delivers it: Delivery-date:, 
+Envelope-to: and Return-path:. This action is requested by the three
+similarly-named options above.
+
+address_pipe:
+  driver = pipe
+  return_output
+
+This transport is used for handling deliveries to pipes that are generated by
+redirection (aliasing or users' .forward files). The return_output option
+specifies that any output on stdout or stderr generated by the pipe is to be
+returned to the sender.
+
+address_file:
+  driver = appendfile
+  delivery_date_add
+  envelope_to_add
+  return_path_add
+
+This transport is used for handling deliveries to files that are generated by
+redirection. The name of the file is not specified in this instance of 
+appendfile, because it comes from the redirect router.
+
+address_reply:
+  driver = autoreply
+
+This transport is used for handling automatic replies generated by users'
+filter files.
+
+
+7.6 Default retry rule
+----------------------
+
+The retry section of the configuration file contains rules which affect the way
+Exim retries deliveries that cannot be completed at the first attempt. It is
+introduced by the line
+
+begin retry
+
+In the default configuration, there is just one rule, which applies to all
+errors:
+
+*   *   F,2h,15m; G,16h,1h,1.5; F,4d,6h
+
+This causes any temporarily failing address to be retried every 15 minutes for
+2 hours, then at intervals starting at one hour and increasing by a factor of
+1.5 until 16 hours have passed, then every 6 hours up to 4 days. If an address
+is not delivered after 4 days of temporary failure, it is bounced. The time is
+measured from first failure, not from the time the message was received.
+
+If the retry section is removed from the configuration, or is empty (that is,
+if no retry rules are defined), Exim will not retry deliveries. This turns
+temporary errors into permanent errors.
+
+
+7.7 Rewriting configuration
+---------------------------
+
+The rewriting section of the configuration, introduced by
+
+begin rewrite
+
+contains rules for rewriting addresses in messages as they arrive. There are no
+rewriting rules in the default configuration file.
+
+
+7.8 Authenticators configuration
+--------------------------------
+
+The authenticators section of the configuration, introduced by
+
+begin authenticators
+
+defines mechanisms for the use of the SMTP AUTH command. The default
+configuration file contains two commented-out example authenticators which
+support plaintext username/password authentication using the standard PLAIN
+mechanism and the traditional but non-standard LOGIN mechanism, with Exim
+acting as the server. PLAIN and LOGIN are enough to support most MUA software.
+
+The example PLAIN authenticator looks like this:
+
+#PLAIN:
+#  driver                  = plaintext
+#  server_set_id           = $auth2
+#  server_prompts          = :
+#  server_condition        = Authentication is not yet configured
+#  server_advertise_condition = ${if def:tls_in_cipher }
+
+And the example LOGIN authenticator looks like this:
+
+#LOGIN:
+#  driver                  = plaintext
+#  server_set_id           = $auth1
+#  server_prompts          = <| Username: | Password:
+#  server_condition        = Authentication is not yet configured
+#  server_advertise_condition = ${if def:tls_in_cipher }
+
+The server_set_id option makes Exim remember the authenticated username in
+$authenticated_id, which can be used later in ACLs or routers. The 
+server_prompts option configures the plaintext authenticator so that it
+implements the details of the specific authentication mechanism, i.e. PLAIN or
+LOGIN. The server_advertise_condition setting controls when Exim offers
+authentication to clients; in the examples, this is only when TLS or SSL has
+been started, so to enable the authenticators you also need to add support for
+TLS as described in section 7.2.
+
+The server_condition setting defines how to verify that the username and
+password are correct. In the examples it just produces an error message. To
+make the authenticators work, you can use a string expansion expression like
+one of the examples in chapter 34.
+
+Beware that the sequence of the parameters to PLAIN and LOGIN differ; the
+usercode and password are in different positions. Chapter 34 covers both.
+
+
+
+===============================================================================
+8. REGULAR EXPRESSIONS
+
+Exim supports the use of regular expressions in many of its options. It uses
+the PCRE2 regular expression library; this provides regular expression matching
+that is compatible with Perl 5. The syntax and semantics of regular expressions
+is discussed in online Perl manpages, in many Perl reference books, and also in
+Jeffrey Friedl's Mastering Regular Expressions, which is published by O'Reilly
+(see http://www.oreilly.com/catalog/regex2/).
+
+The documentation for the syntax and semantics of the regular expressions that
+are supported by PCRE2 is included in the PCRE2 distribution, and no further
+description is included here. The PCRE2 functions are called from Exim using
+the default option settings (that is, with no PCRE2 options set), except that
+the PCRE2_CASELESS option is set when the matching is required to be
+case-insensitive.
+
+In most cases, when a regular expression is required in an Exim configuration,
+it has to start with a circumflex, in order to distinguish it from plain text
+or an "ends with" wildcard. In this example of a configuration setting, the
+second item in the colon-separated list is a regular expression.
+
+domains = a.b.c : ^\\d{3} : *.y.z : ...
+
+The doubling of the backslash is required because of string expansion that
+precedes interpretation - see section 11.1 for more discussion of this issue,
+and a way of avoiding the need for doubling backslashes. The regular expression
+that is eventually used in this example contains just one backslash. The
+circumflex is included in the regular expression, and has the normal effect of
+"anchoring" it to the start of the string that is being matched.
+
+There are, however, two cases where a circumflex is not required for the
+recognition of a regular expression: these are the match condition in a string
+expansion, and the matches condition in an Exim filter file. In these cases,
+the relevant string is always treated as a regular expression; if it does not
+start with a circumflex, the expression is not anchored, and can match anywhere
+in the subject string.
+
+In all cases, if you want a regular expression to match at the end of a string,
+you must code the $ metacharacter to indicate this. For example:
+
+domains = ^\\d{3}\\.example
+
+matches the domain 123.example, but it also matches 123.example.com. You need
+to use:
+
+domains = ^\\d{3}\\.example\$
+
+if you want example to be the top-level domain. The backslash before the $ is
+needed because string expansion also interprets dollar characters.
+
+
+
+===============================================================================
+9. FILE AND DATABASE LOOKUPS
+
+Exim can be configured to look up data in files or databases as it processes
+messages. Two different kinds of syntax are used:
+
+ 1. A string that is to be expanded may contain explicit lookup requests. These
+    cause parts of the string to be replaced by data that is obtained from the
+    lookup. Lookups of this type are conditional expansion items. Different
+    results can be defined for the cases of lookup success and failure. See
+    chapter 11, where string expansions are described in detail. The key for
+    the lookup is specified as part of the string expansion.
+
+ 2. Lists of domains, hosts, and email addresses can contain lookup requests as
+    a way of avoiding excessively long linear lists. In this case, the data
+    that is returned by the lookup is often (but not always) discarded; whether
+    the lookup succeeds or fails is what really counts. These kinds of list are
+    described in chapter 10. The key for the lookup is implicit, given by the
+    context in which the list is expanded.
+
+String expansions, lists, and lookups interact with each other in such a way
+that there is no order in which to describe any one of them that does not
+involve references to the others. Each of these three chapters makes more sense
+if you have read the other two first. If you are reading this for the first
+time, be aware that some of it will make a lot more sense after you have read
+chapters 10 and 11.
+
+
+9.1 Examples of different lookup syntax
+---------------------------------------
+
+It is easy to confuse the two different kinds of lookup, especially as the
+lists that may contain the second kind are always expanded before being
+processed as lists. Therefore, they may also contain lookups of the first kind.
+Be careful to distinguish between the following two examples:
+
+domains = ${lookup{$sender_host_address}lsearch{/some/file}}
+domains = lsearch;/some/file
+
+The first uses a string expansion, the result of which must be a domain list.
+
+The key for an expansion-style lookup must be given explicitly.
+
+No strings have been specified for a successful or a failing lookup; the
+defaults in this case are the looked-up data and an empty string, respectively.
+The expansion takes place before the string is processed as a list, and the
+file that is searched could contain lines like this:
+
+192.168.3.4: domain1:domain2:...
+192.168.1.9: domain3:domain4:...
+
+When the lookup succeeds, the result of the expansion is a list of domains (and
+possibly other types of item that are allowed in domain lists). The result of
+the expansion is not tainted.
+
+In the second example, the lookup is a single item in a domain list. It causes
+Exim to use a lookup to see if the domain that is being processed can be found
+in the file. The file could contains lines like this:
+
+domain1:
+domain2:
+
+Any data that follows the keys is not relevant when checking that the domain
+matches the list item.
+
+The key for a list-style lookup is implicit, from the lookup context, if the
+lookup is a single-key type (see below). For query-style lookup types the key
+must be given explicitly.
+
+It is possible, though no doubt confusing, to use both kinds of lookup at once.
+Consider a file containing lines like this:
+
+192.168.5.6: lsearch;/another/file
+
+If the value of $sender_host_address is 192.168.5.6, expansion of the first 
+domains setting above generates the second setting, which therefore causes a
+second lookup to occur.
+
+The lookup type may optionally be followed by a comma and a comma-separated
+list of options. Each option is a "name=value" pair. Whether an option is
+meaningful depends on the lookup type.
+
+All lookups support the option "cache=no_rd". If this is given then the cache
+that Exim manages for lookup results is not checked before doing the lookup.
+The result of the lookup is still written to the cache.
+
+The rest of this chapter describes the different lookup types that are
+available. Any of them can be used in any part of the configuration where a
+lookup is permitted.
+
+
+9.2 Lookup types
+----------------
+
+Two different types of data lookup are implemented:
+
+  * The single-key type requires the specification of a file in which to look,
+    and a single key to search for. The key must be a non-empty string for the
+    lookup to succeed. The lookup type determines how the file is searched. The
+    file string may not be tainted.
+
+    All single-key lookups support the option "ret=key". If this is given and
+    the lookup (either underlying implementation or cached value) returns data,
+    the result is replaced with a non-tainted version of the lookup key.
+
+  * The query-style type accepts a generalized database query. No particular
+    key value is assumed by Exim for query-style lookups. You can use whichever
+    Exim variables you need to construct the database query.
+
+    If tainted data is used in the query then it should be quuted by using the 
+    ${quote_<lookup-type>:<string>} expansion operator appropriate for the
+    lookup.
+
+The code for each lookup type is in a separate source file that is included in
+the binary of Exim only if the corresponding compile-time option is set. The
+default settings in src/EDITME are:
+
+LOOKUP_DBM=yes
+LOOKUP_LSEARCH=yes
+
+which means that only linear searching and DBM lookups are included by default.
+For some types of lookup (e.g. SQL databases), you need to install appropriate
+libraries and header files before building Exim.
+
+
+9.3 Single-key lookup types
+---------------------------
+
+The following single-key lookup types are implemented:
+
+  * cdb: The given file is searched as a Constant DataBase file, using the key
+    string without a terminating binary zero. The cdb format is designed for
+    indexed files that are read frequently and never updated, except by total
+    re-creation. As such, it is particularly suitable for large files
+    containing aliases or other indexed data referenced by an MTA. Information
+    about cdb and tools for building the files can be found in several places:
+
+    https://cr.yp.to/cdb.html
+    https://www.corpit.ru/mjt/tinycdb.html
+    https://packages.debian.org/stable/utils/freecdb
+    https://github.com/philpennock/cdbtools (in Go)
+
+    A cdb distribution is not needed in order to build Exim with cdb support,
+    because the code for reading cdb files is included directly in Exim itself.
+    However, no means of building or testing cdb files is provided with Exim,
+    so you need to obtain a cdb distribution in order to do this.
+
+  * dbm: Calls to DBM library functions are used to extract data from the given
+    DBM file by looking up the record with the given key. A terminating binary
+    zero is included in the key that is passed to the DBM library. See section
+    4.4 for a discussion of DBM libraries.
+
+    For all versions of Berkeley DB, Exim uses the DB_HASH style of database
+    when building DBM files using the exim_dbmbuild utility. However, when
+    using Berkeley DB versions 3 or 4, it opens existing databases for reading
+    with the DB_UNKNOWN option. This enables it to handle any of the types of
+    database that the library supports, and can be useful for accessing DBM
+    files created by other applications. (For earlier DB versions, DB_HASH is
+    always used.)
+
+  * dbmjz: This is the same as dbm, except that the lookup key is interpreted
+    as an Exim list; the elements of the list are joined together with ASCII
+    NUL characters to form the lookup key. An example usage would be to
+    authenticate incoming SMTP calls using the passwords from Cyrus SASL's /etc
+    /sasldb2 file with the gsasl authenticator or Exim's own cram_md5
+    authenticator.
+
+  * dbmnz: This is the same as dbm, except that a terminating binary zero is
+    not included in the key that is passed to the DBM library. You may need
+    this if you want to look up data in files that are created by or shared
+    with some other application that does not use terminating zeros. For
+    example, you need to use dbmnz rather than dbm if you want to authenticate
+    incoming SMTP calls using the passwords from Courier's /etc/
+    userdbshadow.dat file. Exim's utility program for creating DBM files (
+    exim_dbmbuild) includes the zeros by default, but has an option to omit
+    them (see section 54.9).
+
+  * dsearch: The given file must be an absolute directory path; this is
+    searched for an entry whose name is the key by calling the lstat()
+    function. The key may not contain any forward slash characters. If lstat()
+    succeeds then so does the lookup. The result is regarded as untainted.
+
+    Options for the lookup can be given by appending them after the word
+    "dsearch", separated by a comma. Options, if present, are a comma-separated
+    list having each element starting with a tag name and an equals.
+
+    Two options are supported, for the return value and for filtering match
+    candidates. The "ret" option requests an alternate result value of the
+    entire path for the entry. Example:
+
+    ${lookup {passwd} dsearch,ret=full {/etc}}
+
+    The default result is just the requested entry. The "filter" option
+    requests that only directory entries of a given type are matched. The match
+    value is one of "file", "dir" or "subdir" (the latter not matching "." or
+    ".."). Example:
+
+    ${lookup {passwd} dsearch,filter=file {/etc}}
+
+    The default matching is for any entry type, including directories and
+    symlinks.
+
+    An example of how this lookup can be used to support virtual domains is
+    given in section 51.7.
+
+  * iplsearch: The given file is a text file containing keys and data. A key is
+    terminated by a colon or white space or the end of the line. The keys in
+    the file must be IP addresses, or IP addresses with CIDR masks. Keys that
+    involve IPv6 addresses must be enclosed in quotes to prevent the first
+    internal colon being interpreted as a key terminator. For example:
+
+    1.2.3.4:           data for 1.2.3.4
+    192.168.0.0/16:    data for 192.168.0.0/16
+    "abcd::cdab":      data for abcd::cdab
+    "abcd:abcd::/32"   data for abcd:abcd::/32
+
+    The key for an iplsearch lookup must be an IP address (without a mask). The
+    file is searched linearly, using the CIDR masks where present, until a
+    matching key is found. The first key that matches is used; there is no
+    attempt to find a "best" match. Apart from the way the keys are matched,
+    the processing for iplsearch is the same as for lsearch.
+
+    Warning 1: Unlike most other single-key lookup types, a file of data for 
+    iplsearch can not be turned into a DBM or cdb file, because those lookup
+    types support only literal keys.
+
+    Warning 2: In a host list, you must always use net-iplsearch so that the
+    implicit key is the host's IP address rather than its name (see section
+    10.13).
+
+    Warning 3: Do not use an IPv4-mapped IPv6 address for a key; use the IPv4,
+    in dotted-quad form. (Exim converts IPv4-mapped IPv6 addresses to this
+    notation before executing the lookup.)
+
+    One option is supported, "ret=full", to request the return of the entire
+    line rather than omitting the key portion. Note however that the key
+    portion will have been de-quoted.
+
+  * json: The given file is a text file with a JSON structure. An element of
+    the structure is extracted, defined by the search key. The key is a list of
+    subelement selectors (colon-separated by default but changeable in the
+    usual way) which are applied in turn to select smaller and smaller portions
+    of the JSON structure. If a selector is numeric, it must apply to a JSON
+    array; the (zero-based) nunbered array element is selected. Otherwise it
+    must apply to a JSON object; the named element is selected. The final
+    resulting element can be a simple JSON type or a JSON object or array; for
+    the latter two a string-representation of the JSON is returned. For
+    elements of type string, the returned value is de-quoted.
+
+  * lmdb: The given file is an LMDB database. LMDB is a memory-mapped key-value
+    store, with API modeled loosely on that of BerkeleyDB. See https://
+    symas.com/products/lightning-memory-mapped-database/ for the feature set
+    and operation modes.
+
+    Exim provides read-only access via the LMDB C library. The library can be
+    obtained from https://github.com/LMDB/lmdb or your operating system package
+    repository. To enable LMDB support in Exim set LOOKUP_LMDB=yes in Local/
+    Makefile.
+
+    You will need to separately create the LMDB database file, possibly using
+    the "mdb_load" utility.
+
+  * lsearch: The given file is a text file that is searched linearly for a line
+    beginning with the search key, terminated by a colon or white space or the
+    end of the line. The search is case-insensitive; that is, upper and lower
+    case letters are treated as the same. The first occurrence of the key that
+    is found in the file is used.
+
+    White space between the key and the colon is permitted. The remainder of
+    the line, with leading and trailing white space removed, is the data. This
+    can be continued onto subsequent lines by starting them with any amount of
+    white space, but only a single space character is included in the data at
+    such a junction. If the data begins with a colon, the key must be
+    terminated by a colon, for example:
+
+    baduser:  :fail:
+
+    Empty lines and lines beginning with # are ignored, even if they occur in
+    the middle of an item. This is the traditional textual format of alias
+    files. Note that the keys in an lsearch file are literal strings. There is
+    no wildcarding of any kind.
+
+    In most lsearch files, keys are not required to contain colons or #
+    characters, or white space. However, if you need this feature, it is
+    available. If a key begins with a doublequote character, it is terminated
+    only by a matching quote (or end of line), and the normal escaping rules
+    apply to its contents (see section 6.17). An optional colon is permitted
+    after quoted keys (exactly as for unquoted keys). There is no special
+    handling of quotes for the data part of an lsearch line.
+
+  * nis: The given file is the name of a NIS map, and a NIS lookup is done with
+    the given key, without a terminating binary zero. There is a variant called
+    nis0 which does include the terminating binary zero in the key. This is
+    reportedly needed for Sun-style alias files. Exim does not recognize NIS
+    aliases; the full map names must be used.
+
+  * wildlsearch or nwildlsearch: These search a file linearly, like lsearch,
+    but instead of being interpreted as a literal string, each key in the file
+    may be wildcarded. The difference between these two lookup types is that
+    for wildlsearch, each key in the file is string-expanded before being used,
+    whereas for nwildlsearch, no expansion takes place.
+
+    Like lsearch, the testing is done case-insensitively. However, keys in the
+    file that are regular expressions can be made case-sensitive by the use of
+    "(-i)" within the pattern. The following forms of wildcard are recognized:
+
+     1. The string may begin with an asterisk to mean "ends with". For example:
+
+            *.a.b.c       data for anything.a.b.c
+            *fish         data for anythingfish
+
+     2. The string may begin with a circumflex to indicate a regular
+        expression. For example, for wildlsearch:
+
+            ^\N\d+\.a\.b\N    data for <digits>.a.b
+
+        Note the use of "\N" to disable expansion of the contents of the
+        regular expression. If you are using nwildlsearch, where the keys are
+        not string-expanded, the equivalent entry is:
+
+            ^\d+\.a\.b        data for <digits>.a.b
+
+        The case-insensitive flag is set at the start of compiling the regular
+        expression, but it can be turned off by using "(-i)" at an appropriate
+        point. For example, to make the entire pattern case-sensitive:
+
+            ^(?-i)\d+\.a\.b        data for <digits>.a.b
+
+        If the regular expression contains white space or colon characters, you
+        must either quote it (see lsearch above), or represent these characters
+        in other ways. For example, "\s" can be used for white space and "\x3A"
+        for a colon. This may be easier than quoting, because if you quote, you
+        have to escape all the backslashes inside the quotes.
+
+        Note: It is not possible to capture substrings in a regular expression
+        match for later use, because the results of all lookups are cached. If
+        a lookup is repeated, the result is taken from the cache, and no actual
+        pattern matching takes place. The values of all the numeric variables
+        are unset after a (n)wildlsearch match.
+
+     3. Although I cannot see it being of much use, the general matching
+        function that is used to implement (n)wildlsearch means that the string
+        may begin with a lookup name terminated by a semicolon, and followed by
+        lookup data. For example:
+
+            cdb;/some/file  data for keys that match the file
+
+        The data that is obtained from the nested lookup is discarded.
+
+    Keys that do not match any of these patterns are interpreted literally. The
+    continuation rules for the data are the same as for lsearch, and keys may
+    be followed by optional colons.
+
+    Warning: Unlike most other single-key lookup types, a file of data for (n)
+    wildlsearch can not be turned into a DBM or cdb file, because those lookup
+    types support only literal keys.
+
+  * spf: If Exim is built with SPF support, manual lookups can be done (as
+    opposed to the standard ACL condition method). For details see section 58.4
+    .
+
+
+9.4 Query-style lookup types
+----------------------------
+
+The supported query-style lookup types are listed below. Further details about
+many of them are given in later sections.
+
+  * dnsdb: This does a DNS search for one or more records whose domain names
+    are given in the supplied query. The resulting data is the contents of the
+    records. See section 9.10.
+
+  * ibase: This does a lookup in an InterBase database.
+
+  * ldap: This does an LDAP lookup using a query in the form of a URL, and
+    returns attributes from a single entry. There is a variant called ldapm
+    that permits values from multiple entries to be returned. A third variant
+    called ldapdn returns the Distinguished Name of a single entry instead of
+    any attribute values. See section 9.14.
+
+  * mysql: The format of the query is an SQL statement that is passed to a
+    MySQL database. See section 9.21.
+
+  * nisplus: This does a NIS+ lookup using a query that can specify the name of
+    the field to be returned. See section 9.20.
+
+  * oracle: The format of the query is an SQL statement that is passed to an
+    Oracle database. See section 9.21.
+
+  * passwd is a query-style lookup with queries that are just user names. The
+    lookup calls getpwnam() to interrogate the system password data, and on
+    success, the result string is the same as you would get from an lsearch
+    lookup on a traditional /etc/passwd file, though with "*" for the password
+    value. For example:
+
+    *:42:42:King Rat:/home/kr:/bin/bash
+
+  * pgsql: The format of the query is an SQL statement that is passed to a
+    PostgreSQL database. See section 9.21.
+
+  * redis: The format of the query is either a simple get or simple set, passed
+    to a Redis database. See section 9.21.
+
+  * sqlite: The format of the query is an SQL statement that is passed to an
+    SQLite database. See section 9.26.
+
+  * testdb: This is a lookup type that is used for testing Exim. It is not
+    likely to be useful in normal operation.
+
+  * whoson: Whoson (http://whoson.sourceforge.net) is a protocol that allows a
+    server to check whether a particular (dynamically allocated) IP address is
+    currently allocated to a known (trusted) user and, optionally, to obtain
+    the identity of the said user. For SMTP servers, Whoson was popular at one
+    time for "POP before SMTP" authentication, but that approach has been
+    superseded by SMTP authentication. In Exim, Whoson can be used to implement
+    "POP before SMTP" checking using ACL statements such as
+
+    require condition = \
+      ${lookup whoson {$sender_host_address}{yes}{no}}
+
+    The query consists of a single IP address. The value returned is the name
+    of the authenticated user, which is stored in the variable $value. However,
+    in this example, the data in $value is not used; the result of the lookup
+    is one of the fixed strings "yes" or "no".
+
+
+9.5 Temporary errors in lookups
+-------------------------------
+
+Lookup functions can return temporary error codes if the lookup cannot be
+completed. For example, an SQL or LDAP database might be unavailable. For this
+reason, it is not advisable to use a lookup that might do this for critical
+options such as a list of local domains.
+
+When a lookup cannot be completed in a router or transport, delivery of the
+message (to the relevant address) is deferred, as for any other temporary
+error. In other circumstances Exim may assume the lookup has failed, or may
+give up altogether.
+
+
+9.6 Default values in single-key lookups
+----------------------------------------
+
+In this context, a "default value" is a value specified by the administrator
+that is to be used if a lookup fails.
+
+Note: This section applies only to single-key lookups. For query-style lookups,
+the facilities of the query language must be used. An attempt to specify a
+default for a query-style lookup provokes an error.
+
+If "*" is added to a single-key lookup type (for example, lsearch*) and the
+initial lookup fails, the key "*" is looked up in the file to provide a default
+value. See also the section on partial matching below.
+
+Alternatively, if "*@" is added to a single-key lookup type (for example dbm*@)
+then, if the initial lookup fails and the key contains an @ character, a second
+lookup is done with everything before the last @ replaced by *. This makes it
+possible to provide per-domain defaults in alias files that include the domains
+in the keys. If the second lookup fails (or doesn't take place because there is
+no @ in the key), "*" is looked up. For example, a redirect router might
+contain:
+
+data = ${lookup{$local_part@$domain}lsearch*@{/etc/mix-aliases}}
+
+Suppose the address that is being processed is jane@eyre.example. Exim looks up
+these keys, in this order:
+
+jane@eyre.example
+*@eyre.example
+*
+
+The data is taken from whichever key it finds first. Note: In an lsearch file,
+this does not mean the first of these keys in the file. A complete scan is done
+for each key, and only if it is not found at all does Exim move on to try the
+next key.
+
+
+9.7 Partial matching in single-key lookups
+------------------------------------------
+
+The normal operation of a single-key lookup is to search the file for an exact
+match with the given key. However, in a number of situations where domains are
+being looked up, it is useful to be able to do partial matching. In this case,
+information in the file that has a key starting with "*." is matched by any
+domain that ends with the components that follow the full stop. For example, if
+a key in a DBM file is
+
+*.dates.fict.example
+
+then when partial matching is enabled this is matched by (amongst others) 
+2001.dates.fict.example and 1984.dates.fict.example. It is also matched by 
+dates.fict.example, if that does not appear as a separate key in the file.
+
+Note: Partial matching is not available for query-style lookups. It is also not
+available for any lookup items in address lists (see section 10.20).
+
+Partial matching is implemented by doing a series of separate lookups using
+keys constructed by modifying the original subject key. This means that it can
+be used with any of the single-key lookup types, provided that partial matching
+keys beginning with a special prefix (default "*.") are included in the data
+file. Keys in the file that do not begin with the prefix are matched only by
+unmodified subject keys when partial matching is in use.
+
+Partial matching is requested by adding the string "partial-" to the front of
+the name of a single-key lookup type, for example, partial-dbm. When this is
+done, the subject key is first looked up unmodified; if that fails, "*." is
+added at the start of the subject key, and it is looked up again. If that
+fails, further lookups are tried with dot-separated components removed from the
+start of the subject key, one-by-one, and "*." added on the front of what
+remains.
+
+A minimum number of two non-* components are required. This can be adjusted by
+including a number before the hyphen in the search type. For example, 
+partial3-lsearch specifies a minimum of three non-* components in the modified
+keys. Omitting the number is equivalent to "partial2-". If the subject key is 
+2250.dates.fict.example then the following keys are looked up when the minimum
+number of non-* components is two:
+
+2250.dates.fict.example
+*.2250.dates.fict.example
+*.dates.fict.example
+*.fict.example
+
+As soon as one key in the sequence is successfully looked up, the lookup
+finishes.
+
+The use of "*." as the partial matching prefix is a default that can be
+changed. The motivation for this feature is to allow Exim to operate with file
+formats that are used by other MTAs. A different prefix can be supplied in
+parentheses instead of the hyphen after "partial". For example:
+
+domains = partial(.)lsearch;/some/file
+
+In this example, if the domain is a.b.c, the sequence of lookups is "a.b.c",
+".a.b.c", and ".b.c" (the default minimum of 2 non-wild components is
+unchanged). The prefix may consist of any punctuation characters other than a
+closing parenthesis. It may be empty, for example:
+
+domains = partial1()cdb;/some/file
+
+For this example, if the domain is a.b.c, the sequence of lookups is "a.b.c",
+"b.c", and "c".
+
+If "partial0" is specified, what happens at the end (when the lookup with just
+one non-wild component has failed, and the original key is shortened right down
+to the null string) depends on the prefix:
+
+  * If the prefix has zero length, the whole lookup fails.
+
+  * If the prefix has length 1, a lookup for just the prefix is done. For
+    example, the final lookup for "partial0(.)" is for "." alone.
+
+  * Otherwise, if the prefix ends in a dot, the dot is removed, and the
+    remainder is looked up. With the default prefix, therefore, the final
+    lookup is for "*" on its own.
+
+  * Otherwise, the whole prefix is looked up.
+
+If the search type ends in "*" or "*@" (see section 9.6 above), the search for
+an ultimate default that this implies happens after all partial lookups have
+failed. If "partial0" is specified, adding "*" to the search type has no effect
+with the default prefix, because the "*" key is already included in the
+sequence of partial lookups. However, there might be a use for lookup types
+such as "partial0(.)lsearch*".
+
+The use of "*" in lookup partial matching differs from its use as a wildcard in
+domain lists and the like. Partial matching works only in terms of
+dot-separated components; a key such as "*fict.example" in a database file is
+useless, because the asterisk in a partial matching subject key is always
+followed by a dot.
+
+
+9.8 Lookup caching
+------------------
+
+Exim caches all lookup results in order to avoid needless repetition of
+lookups. However, because (apart from the daemon) Exim operates as a collection
+of independent, short-lived processes, this caching applies only within a
+single Exim process. There is no inter-process lookup caching facility.
+
+If an option "cache=no_rd" is used on the lookup then the cache is only written
+to, cached data is not used for the operation and a real lookup is done.
+
+For single-key lookups, Exim keeps the relevant files open in case there is
+another lookup that needs them. In some types of configuration this can lead to
+many files being kept open for messages with many recipients. To avoid hitting
+the operating system limit on the number of simultaneously open files, Exim
+closes the least recently used file when it needs to open more files than its
+own internal limit, which can be changed via the lookup_open_max option.
+
+The single-key lookup files are closed and the lookup caches are flushed at
+strategic points during delivery - for example, after all routing is complete.
+
+
+9.9 Quoting lookup data
+-----------------------
+
+When data from an incoming message is included in a query-style lookup, there
+is the possibility of special characters in the data messing up the syntax of
+the query. For example, a NIS+ query that contains
+
+[name=$local_part]
+
+will be broken if the local part happens to contain a closing square bracket.
+For NIS+, data can be enclosed in double quotes like this:
+
+[name="$local_part"]
+
+but this still leaves the problem of a double quote in the data. The rule for
+NIS+ is that double quotes must be doubled. Other lookup types have different
+rules, and to cope with the differing requirements, an expansion operator of
+the following form is provided:
+
+${quote_<lookup-type>:<string>}
+
+For example, the safest way to write the NIS+ query is
+
+[name="${quote_nisplus:$local_part}"]
+
+See chapter 11 for full coverage of string expansions. The quote operator can
+be used for all lookup types, but has no effect for single-key lookups, since
+no quoting is ever needed in their key strings.
+
+
+9.10 More about dnsdb
+---------------------
+
+The dnsdb lookup type uses the DNS as its database. A simple query consists of
+a record type and a domain name, separated by an equals sign. For example, an
+expansion string could contain:
+
+${lookup dnsdb{mx=a.b.example}{$value}fail}
+
+If the lookup succeeds, the result is placed in $value, which in this case is
+used on its own as the result. If the lookup does not succeed, the "fail"
+keyword causes a forced expansion failure - see section 11.4 for an explanation
+of what this means.
+
+The supported DNS record types are A, CNAME, MX, NS, PTR, SOA, SPF, SRV, TLSA
+and TXT, and, when Exim is compiled with IPv6 support, AAAA. If no type is
+given, TXT is assumed.
+
+For any record type, if multiple records are found, the data is returned as a
+concatenation, with newline as the default separator. The order, of course,
+depends on the DNS resolver. You can specify a different separator character
+between multiple records by putting a right angle-bracket followed immediately
+by the new separator at the start of the query. For example:
+
+${lookup dnsdb{>: a=host1.example}}
+
+It is permitted to specify a space as the separator character. Further white
+space is ignored. For lookup types that return multiple fields per record, an
+alternate field separator can be specified using a comma after the main
+separator character, followed immediately by the field separator.
+
+When the type is PTR, the data can be an IP address, written as normal;
+inversion and the addition of in-addr.arpa or ip6.arpa happens automatically.
+For example:
+
+${lookup dnsdb{ptr=192.168.4.5}{$value}fail}
+
+If the data for a PTR record is not a syntactically valid IP address, it is not
+altered and nothing is added.
+
+For an MX lookup, both the preference value and the host name are returned for
+each record, separated by a space. For an SRV lookup, the priority, weight,
+port, and host name are returned for each record, separated by spaces. The
+field separator can be modified as above.
+
+For TXT records with multiple items of data, only the first item is returned,
+unless a field separator is specified. To concatenate items without a
+separator, use a semicolon instead. For SPF records the default behaviour is to
+concatenate multiple items without using a separator.
+
+${lookup dnsdb{>\n,: txt=a.b.example}}
+${lookup dnsdb{>\n; txt=a.b.example}}
+${lookup dnsdb{spf=example.org}}
+
+It is permitted to specify a space as the separator character. Further white
+space is ignored.
+
+For an SOA lookup, while no result is obtained the lookup is redone with
+successively more leading components dropped from the given domain. Only the
+primary-nameserver field is returned unless a field separator is specified.
+
+${lookup dnsdb{>:,; soa=a.b.example.com}}
+
+
+9.11 Dnsdb lookup modifiers
+---------------------------
+
+Modifiers for dnsdb lookups are given by optional keywords, each followed by a
+comma, that may appear before the record type.
+
+The dnsdb lookup fails only if all the DNS lookups fail. If there is a
+temporary DNS error for any of them, the behaviour is controlled by a
+defer-option modifier. The possible keywords are "defer_strict", "defer_never",
+and "defer_lax". With "strict" behaviour, any temporary DNS error causes the
+whole lookup to defer. With "never" behaviour, a temporary DNS error is
+ignored, and the behaviour is as if the DNS lookup failed to find anything.
+With "lax" behaviour, all the queries are attempted, but a temporary DNS error
+causes the whole lookup to defer only if none of the other lookups succeed. The
+default is "lax", so the following lookups are equivalent:
+
+${lookup dnsdb{defer_lax,a=one.host.com:two.host.com}}
+${lookup dnsdb{a=one.host.com:two.host.com}}
+
+Thus, in the default case, as long as at least one of the DNS lookups yields
+some data, the lookup succeeds.
+
+Use of DNSSEC is controlled by a dnssec modifier. The possible keywords are
+"dnssec_strict", "dnssec_lax", and "dnssec_never". With "strict" or "lax"
+DNSSEC information is requested with the lookup. With "strict" a response from
+the DNS resolver that is not labelled as authenticated data is treated as
+equivalent to a temporary DNS error. The default is "lax".
+
+See also the $lookup_dnssec_authenticated variable.
+
+Timeout for the dnsdb lookup can be controlled by a retrans modifier. The form
+is "retrans_VAL" where VAL is an Exim time specification (e.g. "5s"). The
+default value is set by the main configuration option dns_retrans.
+
+Retries for the dnsdb lookup can be controlled by a retry modifier. The form if
+"retry_VAL" where VAL is an integer. The default count is set by the main
+configuration option dns_retry.
+
+Dnsdb lookup results are cached within a single process (and its children). The
+cache entry lifetime is limited to the smallest time-to-live (TTL) value of the
+set of returned DNS records.
+
+
+9.12 Pseudo dnsdb record types
+------------------------------
+
+By default, both the preference value and the host name are returned for each
+MX record, separated by a space. If you want only host names, you can use the
+pseudo-type MXH:
+
+${lookup dnsdb{mxh=a.b.example}}
+
+In this case, the preference values are omitted, and just the host names are
+returned.
+
+Another pseudo-type is ZNS (for "zone NS"). It performs a lookup for NS records
+on the given domain, but if none are found, it removes the first component of
+the domain name, and tries again. This process continues until NS records are
+found or there are no more components left (or there is a DNS error). In other
+words, it may return the name servers for a top-level domain, but it never
+returns the root name servers. If there are no NS records for the top-level
+domain, the lookup fails. Consider these examples:
+
+${lookup dnsdb{zns=xxx.quercite.com}}
+${lookup dnsdb{zns=xxx.edu}}
+
+Assuming that in each case there are no NS records for the full domain name,
+the first returns the name servers for quercite.com, and the second returns the
+name servers for edu.
+
+You should be careful about how you use this lookup because, unless the
+top-level domain does not exist, the lookup always returns some host names. The
+sort of use to which this might be put is for seeing if the name servers for a
+given domain are on a blacklist. You can probably assume that the name servers
+for the high-level domains such as com or co.uk are not going to be on such a
+list.
+
+A third pseudo-type is CSA (Client SMTP Authorization). This looks up SRV
+records according to the CSA rules, which are described in section 44.52.
+Although dnsdb supports SRV lookups directly, this is not sufficient because of
+the extra parent domain search behaviour of CSA. The result of a successful
+lookup such as:
+
+${lookup dnsdb {csa=$sender_helo_name}}
+
+has two space-separated fields: an authorization code and a target host name.
+The authorization code can be "Y" for yes, "N" for no, "X" for explicit
+authorization required but absent, or "?" for unknown.
+
+The pseudo-type A+ performs an AAAA and then an A lookup. All results are
+returned; defer processing (see below) is handled separately for each lookup.
+Example:
+
+${lookup dnsdb {>; a+=$sender_helo_name}}
+
+
+9.13 Multiple dnsdb lookups
+---------------------------
+
+In the previous sections, dnsdb lookups for a single domain are described.
+However, you can specify a list of domains or IP addresses in a single dnsdb
+lookup. The list is specified in the normal Exim way, with colon as the default
+separator, but with the ability to change this. For example:
+
+${lookup dnsdb{one.domain.com:two.domain.com}}
+${lookup dnsdb{a=one.host.com:two.host.com}}
+${lookup dnsdb{ptr = <; 1.2.3.4 ; 4.5.6.8}}
+
+In order to retain backwards compatibility, there is one special case: if the
+lookup type is PTR and no change of separator is specified, Exim looks to see
+if the rest of the string is precisely one IPv6 address. In this case, it does
+not treat it as a list.
+
+The data from each lookup is concatenated, with newline separators by default,
+in the same way that multiple DNS records for a single item are handled. A
+different separator can be specified, as described above.
+
+
+9.14 More about LDAP
+--------------------
+
+The original LDAP implementation came from the University of Michigan; this has
+become "Open LDAP", and there are now two different releases. Another
+implementation comes from Netscape, and Solaris 7 and subsequent releases
+contain inbuilt LDAP support. Unfortunately, though these are all compatible at
+the lookup function level, their error handling is different. For this reason
+it is necessary to set a compile-time variable when building Exim with LDAP, to
+indicate which LDAP library is in use. One of the following should appear in
+your Local/Makefile:
+
+LDAP_LIB_TYPE=UMICHIGAN
+LDAP_LIB_TYPE=OPENLDAP1
+LDAP_LIB_TYPE=OPENLDAP2
+LDAP_LIB_TYPE=NETSCAPE
+LDAP_LIB_TYPE=SOLARIS
+
+If LDAP_LIB_TYPE is not set, Exim assumes "OPENLDAP1", which has the same
+interface as the University of Michigan version.
+
+There are three LDAP lookup types in Exim. These behave slightly differently in
+the way they handle the results of a query:
+
+  * ldap requires the result to contain just one entry; if there are more, it
+    gives an error.
+
+  * ldapdn also requires the result to contain just one entry, but it is the
+    Distinguished Name that is returned rather than any attribute values.
+
+  * ldapm permits the result to contain more than one entry; the attributes
+    from all of them are returned.
+
+For ldap and ldapm, if a query finds only entries with no attributes, Exim
+behaves as if the entry did not exist, and the lookup fails. The format of the
+data returned by a successful lookup is described in the next section. First we
+explain how LDAP queries are coded.
+
+
+9.15 Format of LDAP queries
+---------------------------
+
+An LDAP query takes the form of a URL as defined in RFC 2255. For example, in
+the configuration of a redirect router one might have this setting:
+
+data = ${lookup ldap \
+  {ldap:///cn=$local_part,o=University%20of%20Cambridge,\
+  c=UK?mailbox?base?}}
+
+The URL may begin with "ldap" or "ldaps" if your LDAP library supports secure
+(encrypted) LDAP connections. The second of these ensures that an encrypted TLS
+connection is used.
+
+With sufficiently modern LDAP libraries, Exim supports forcing TLS over regular
+LDAP connections, rather than the SSL-on-connect "ldaps". See the 
+ldap_start_tls option.
+
+Starting with Exim 4.83, the initialization of LDAP with TLS is more tightly
+controlled. Every part of the TLS configuration can be configured by settings
+in exim.conf. Depending on the version of the client libraries installed on
+your system, some of the initialization may have required setting options in /
+etc/ldap.conf or ~/.ldaprc to get TLS working with self-signed certificates.
+This revealed a nuance where the current UID that exim was running as could
+affect which config files it read. With Exim 4.83, these methods become
+optional, only taking effect if not specifically set in exim.conf.
+
+
+9.16 LDAP quoting
+-----------------
+
+Two levels of quoting are required in LDAP queries, the first for LDAP itself
+and the second because the LDAP query is represented as a URL. Furthermore,
+within an LDAP query, two different kinds of quoting are required. For this
+reason, there are two different LDAP-specific quoting operators.
+
+The quote_ldap operator is designed for use on strings that are part of filter
+specifications. Conceptually, it first does the following conversions on the
+string:
+
+*   =>   \2A
+(   =>   \28
+)   =>   \29
+\   =>   \5C
+
+in accordance with RFC 2254. The resulting string is then quoted according to
+the rules for URLs, that is, all non-alphanumeric characters except
+
+! $ ' - . _ ( ) * +
+
+are converted to their hex values, preceded by a percent sign. For example:
+
+${quote_ldap: a(bc)*, a<yz>; }
+
+yields
+
+%20a%5C28bc%5C29%5C2A%2C%20a%3Cyz%3E%3B%20
+
+Removing the URL quoting, this is (with a leading and a trailing space):
+
+a\28bc\29\2A, a<yz>;
+
+The quote_ldap_dn operator is designed for use on strings that are part of base
+DN specifications in queries. Conceptually, it first converts the string by
+inserting a backslash in front of any of the following characters:
+
+, + " \ < > ;
+
+It also inserts a backslash before any leading spaces or # characters, and
+before any trailing spaces. (These rules are in RFC 2253.) The resulting string
+is then quoted according to the rules for URLs. For example:
+
+${quote_ldap_dn: a(bc)*, a<yz>; }
+
+yields
+
+%5C%20a(bc)*%5C%2C%20a%5C%3Cyz%5C%3E%5C%3B%5C%20
+
+Removing the URL quoting, this is (with a trailing space):
+
+\ a(bc)*\, a\<yz\>\;\
+
+There are some further comments about quoting in the section on LDAP
+authentication below.
+
+
+9.17 LDAP connections
+---------------------
+
+The connection to an LDAP server may either be over TCP/IP, or, when OpenLDAP
+is in use, via a Unix domain socket. The example given above does not specify
+an LDAP server. A server that is reached by TCP/IP can be specified in a query
+by starting it with
+
+ldap://<hostname>:<port>/...
+
+If the port (and preceding colon) are omitted, the standard LDAP port (389) is
+used. When no server is specified in a query, a list of default servers is
+taken from the ldap_default_servers configuration option. This supplies a
+colon-separated list of servers which are tried in turn until one successfully
+handles a query, or there is a serious error. Successful handling either
+returns the requested data, or indicates that it does not exist. Serious errors
+are syntactical, or multiple values when only a single value is expected.
+Errors which cause the next server to be tried are connection failures, bind
+failures, and timeouts.
+
+For each server name in the list, a port number can be given. The standard way
+of specifying a host and port is to use a colon separator (RFC 1738). Because 
+ldap_default_servers is a colon-separated list, such colons have to be doubled.
+For example
+
+ldap_default_servers = ldap1.example.com::145:ldap2.example.com
+
+If ldap_default_servers is unset, a URL with no server name is passed to the
+LDAP library with no server name, and the library's default (normally the local
+host) is used.
+
+If you are using the OpenLDAP library, you can connect to an LDAP server using
+a Unix domain socket instead of a TCP/IP connection. This is specified by using
+"ldapi" instead of "ldap" in LDAP queries. What follows here applies only to
+OpenLDAP. If Exim is compiled with a different LDAP library, this feature is
+not available.
+
+For this type of connection, instead of a host name for the server, a pathname
+for the socket is required, and the port number is not relevant. The pathname
+can be specified either as an item in ldap_default_servers, or inline in the
+query. In the former case, you can have settings such as
+
+ldap_default_servers = /tmp/ldap.sock : backup.ldap.your.domain
+
+When the pathname is given in the query, you have to escape the slashes as
+"%2F" to fit in with the LDAP URL syntax. For example:
+
+${lookup ldap {ldapi://%2Ftmp%2Fldap.sock/o=...
+
+When Exim processes an LDAP lookup and finds that the "hostname" is really a
+pathname, it uses the Unix domain socket code, even if the query actually
+specifies "ldap" or "ldaps". In particular, no encryption is used for a socket
+connection. This behaviour means that you can use a setting of 
+ldap_default_servers such as in the example above with traditional "ldap" or
+"ldaps" queries, and it will work. First, Exim tries a connection via the Unix
+domain socket; if that fails, it tries a TCP/IP connection to the backup host.
+
+If an explicit "ldapi" type is given in a query when a host name is specified,
+an error is diagnosed. However, if there are more items in ldap_default_servers
+, they are tried. In other words:
+
+  * Using a pathname with "ldap" or "ldaps" forces the use of the Unix domain
+    interface.
+
+  * Using "ldapi" with a host name causes an error.
+
+Using "ldapi" with no host or path in the query, and no setting of 
+ldap_default_servers, does whatever the library does by default.
+
+
+9.18 LDAP authentication and control information
+------------------------------------------------
+
+The LDAP URL syntax provides no way of passing authentication and other control
+information to the server. To make this possible, the URL in an LDAP query may
+be preceded by any number of <name>=<value> settings, separated by spaces. If a
+value contains spaces it must be enclosed in double quotes, and when double
+quotes are used, backslash is interpreted in the usual way inside them. The
+following names are recognized:
+
+    DEREFERENCE set the dereferencing parameter
+    NETTIME     set a timeout for a network operation
+    USER        set the DN, for authenticating the LDAP bind
+    PASS        set the password, likewise
+    REFERRALS   set the referrals parameter
+    SERVERS     set alternate server list for this query only
+    SIZE        set the limit for the number of entries returned
+    TIME        set the maximum waiting time for a query
+
+The value of the DEREFERENCE parameter must be one of the words "never",
+"searching", "finding", or "always". The value of the REFERRALS parameter must
+be "follow" (the default) or "nofollow". The latter stops the LDAP library from
+trying to follow referrals issued by the LDAP server.
+
+The name CONNECT is an obsolete name for NETTIME, retained for backwards
+compatibility. This timeout (specified as a number of seconds) is enforced from
+the client end for operations that can be carried out over a network.
+Specifically, it applies to network connections and calls to the ldap_result()
+function. If the value is greater than zero, it is used if
+LDAP_OPT_NETWORK_TIMEOUT is defined in the LDAP headers (OpenLDAP), or if
+LDAP_X_OPT_CONNECT_TIMEOUT is defined in the LDAP headers (Netscape SDK 4.1). A
+value of zero forces an explicit setting of "no timeout" for Netscape SDK; for
+OpenLDAP no action is taken.
+
+The TIME parameter (also a number of seconds) is passed to the server to set a
+server-side limit on the time taken to complete a search.
+
+The SERVERS parameter allows you to specify an alternate list of ldap servers
+to use for an individual lookup. The global ldap_default_servers option
+provides a default list of ldap servers, and a single lookup can specify a
+single ldap server to use. But when you need to do a lookup with a list of
+servers that is different than the default list (maybe different order, maybe a
+completely different set of servers), the SERVERS parameter allows you to
+specify this alternate list (colon-separated).
+
+Here is an example of an LDAP query in an Exim lookup that uses some of these
+values. This is a single line, folded to fit on the page:
+
+${lookup ldap
+  {user="cn=manager,o=University of Cambridge,c=UK" pass=secret
+  ldap:///o=University%20of%20Cambridge,c=UK?sn?sub?(cn=foo)}
+  {$value}fail}
+
+The encoding of spaces as "%20" is a URL thing which should not be done for any
+of the auxiliary data. Exim configuration settings that include lookups which
+contain password information should be preceded by "hide" to prevent non-admin
+users from using the -bP option to see their values.
+
+The auxiliary data items may be given in any order. The default is no
+connection timeout (the system timeout is used), no user or password, no limit
+on the number of entries returned, and no time limit on queries.
+
+When a DN is quoted in the USER= setting for LDAP authentication, Exim removes
+any URL quoting that it may contain before passing it LDAP. Apparently some
+libraries do this for themselves, but some do not. Removing the URL quoting has
+two advantages:
+
+  * It makes it possible to use the same quote_ldap_dn expansion for USER= DNs
+    as with DNs inside actual queries.
+
+  * It permits spaces inside USER= DNs.
+
+For example, a setting such as
+
+USER=cn=${quote_ldap_dn:$1}
+
+should work even if $1 contains spaces.
+
+Expanded data for the PASS= value should be quoted using the quote expansion
+operator, rather than the LDAP quote operators. The only reason this field
+needs quoting is to ensure that it conforms to the Exim syntax, which does not
+allow unquoted spaces. For example:
+
+PASS=${quote:$3}
+
+The LDAP authentication mechanism can be used to check passwords as part of
+SMTP authentication. See the ldapauth expansion string condition in chapter 11.
+
+
+9.19 Format of data returned by LDAP
+------------------------------------
+
+The ldapdn lookup type returns the Distinguished Name from a single entry as a
+sequence of values, for example
+
+cn=manager,o=University of Cambridge,c=UK
+
+The ldap lookup type generates an error if more than one entry matches the
+search filter, whereas ldapm permits this case, and inserts a newline in the
+result between the data from different entries. It is possible for multiple
+values to be returned for both ldap and ldapm, but in the former case you know
+that whatever values are returned all came from a single entry in the
+directory.
+
+In the common case where you specify a single attribute in your LDAP query, the
+result is not quoted, and does not contain the attribute name. If the attribute
+has multiple values, they are separated by commas. Any comma that is part of an
+attribute's value is doubled.
+
+If you specify multiple attributes, the result contains space-separated, quoted
+strings, each preceded by the attribute name and an equals sign. Within the
+quotes, the quote character, backslash, and newline are escaped with
+backslashes, and commas are used to separate multiple values for the attribute.
+Any commas in attribute values are doubled (permitting treatment of the values
+as a comma-separated list). Apart from the escaping, the string within quotes
+takes the same form as the output when a single attribute is requested.
+Specifying no attributes is the same as specifying all of an entry's
+attributes.
+
+Here are some examples of the output format. The first line of each pair is an
+LDAP query, and the second is the data that is returned. The attribute called 
+attr1 has two values, one of them with an embedded comma, whereas attr2 has
+only one value. Both attributes are derived from attr (they have SUP attr in
+their schema definitions).
+
+ldap:///o=base?attr1?sub?(uid=fred)
+value1.1,value1,,2
+
+ldap:///o=base?attr2?sub?(uid=fred)
+value two
+
+ldap:///o=base?attr?sub?(uid=fred)
+value1.1,value1,,2,value two
+
+ldap:///o=base?attr1,attr2?sub?(uid=fred)
+attr1="value1.1,value1,,2" attr2="value two"
+
+ldap:///o=base??sub?(uid=fred)
+objectClass="top" attr1="value1.1,value1,,2" attr2="value two"
+
+You can make use of Exim's -be option to run expansion tests and thereby check
+the results of LDAP lookups. The extract operator in string expansions can be
+used to pick out individual fields from data that consists of key=value pairs.
+The listextract operator should be used to pick out individual values of
+attributes, even when only a single value is expected. The doubling of embedded
+commas allows you to use the returned data as a comma separated list (using the
+"<," syntax for changing the input list separator).
+
+
+9.20 More about NIS+
+--------------------
+
+NIS+ queries consist of a NIS+ indexed name followed by an optional colon and
+field name. If this is given, the result of a successful query is the contents
+of the named field; otherwise the result consists of a concatenation of 
+field-name=field-value pairs, separated by spaces. Empty values and values
+containing spaces are quoted. For example, the query
+
+[name=mg1456],passwd.org_dir
+
+might return the string
+
+name=mg1456 passwd="" uid=999 gid=999 gcos="Martin Guerre"
+home=/home/mg1456 shell=/bin/bash shadow=""
+
+(split over two lines here to fit on the page), whereas
+
+[name=mg1456],passwd.org_dir:gcos
+
+would just return
+
+Martin Guerre
+
+with no quotes. A NIS+ lookup fails if NIS+ returns more than one table entry
+for the given indexed key. The effect of the quote_nisplus expansion operator
+is to double any quote characters within the text.
+
+
+9.21 SQL lookups
+----------------
+
+Exim can support lookups in InterBase, MySQL, Oracle, PostgreSQL, Redis, and
+SQLite databases. Queries for these databases contain SQL statements, so an
+example might be
+
+${lookup mysql{select mailbox from users where id='userx'}\
+  {$value}fail}
+
+If the result of the query contains more than one field, the data for each
+field in the row is returned, preceded by its name, so the result of
+
+${lookup pgsql{select home,name from users where id='userx'}\
+  {$value}}
+
+might be
+
+home=/home/userx name="Mister X"
+
+Empty values and values containing spaces are double quoted, with embedded
+quotes escaped by a backslash. If the result of the query contains just one
+field, the value is passed back verbatim, without a field name, for example:
+
+Mister X
+
+If the result of the query yields more than one row, it is all concatenated,
+with a newline between the data for each row.
+
+
+9.22 More about MySQL, PostgreSQL, Oracle, InterBase, and Redis
+---------------------------------------------------------------
+
+If any MySQL, PostgreSQL, Oracle, InterBase or Redis lookups are used, the 
+mysql_servers, pgsql_servers, oracle_servers, ibase_servers, or redis_servers
+option (as appropriate) must be set to a colon-separated list of server
+information. (For MySQL and PostgreSQL, the global option need not be set if
+all queries contain their own server information - see section 9.23.) For all
+but Redis each item in the list is a slash-separated list of four items: host
+name, database name, user name, and password. In the case of Oracle, the host
+name field is used for the "service name", and the database name field is not
+used and should be empty. For example:
+
+hide oracle_servers = oracle.plc.example//userx/abcdwxyz
+
+Because password data is sensitive, you should always precede the setting with
+"hide", to prevent non-admin users from obtaining the setting via the -bP
+option. Here is an example where two MySQL servers are listed:
+
+hide mysql_servers = localhost/users/root/secret:\
+                     otherhost/users/root/othersecret
+
+For MySQL and PostgreSQL, a host may be specified as <name>:<port> but because
+this is a colon-separated list, the colon has to be doubled. For each query,
+these parameter groups are tried in order until a connection is made and a
+query is successfully processed. The result of a query may be that no data is
+found, but that is still a successful query. In other words, the list of
+servers provides a backup facility, not a list of different places to look.
+
+For Redis the global option need not be specified if all queries contain their
+own server information - see section 9.23. If specified, the option must be set
+to a colon-separated list of server information. Each item in the list is a
+slash-separated list of three items: host, database number, and password.
+
+ 1. The host is required and may be either an IPv4 address and optional port
+    number (separated by a colon, which needs doubling due to the higher-level
+    list), or a Unix socket pathname enclosed in parentheses
+
+ 2. The database number is optional; if present that number is selected in the
+    backend
+
+ 3. The password is optional; if present it is used to authenticate to the
+    backend
+
+The quote_mysql, quote_pgsql, and quote_oracle expansion operators convert
+newline, tab, carriage return, and backspace to \n, \t, \r, and \b
+respectively, and the characters single-quote, double-quote, and backslash
+itself are escaped with backslashes.
+
+The quote_redis expansion operator escapes whitespace and backslash characters
+with a backslash.
+
+
+9.23 Specifying the server in the query
+---------------------------------------
+
+For MySQL, PostgreSQL and Redis lookups (but not currently for Oracle and
+InterBase), it is possible to specify a list of servers with an individual
+query. This is done by appending a comma-separated option to the query type:
+
+,servers=server1:server2:server3:...
+
+Each item in the list may take one of two forms:
+
+ 1. If it contains no slashes it is assumed to be just a host name. The
+    appropriate global option (mysql_servers or pgsql_servers) is searched for
+    a host of the same name, and the remaining parameters (database, user,
+    password) are taken from there.
+
+ 2. If it contains any slashes, it is taken as a complete parameter set.
+
+The list of servers is used in exactly the same way as the global list. Once a
+connection to a server has happened and a query has been successfully executed,
+processing of the lookup ceases.
+
+This feature is intended for use in master/slave situations where updates are
+occurring and you want to update the master rather than a slave. If the master
+is in the list as a backup for reading, you might have a global setting like
+this:
+
+mysql_servers = slave1/db/name/pw:\
+                slave2/db/name/pw:\
+                master/db/name/pw
+
+In an updating lookup, you could then write:
+
+${lookup mysql,servers=master {UPDATE ...} }
+
+That query would then be sent only to the master server. If, on the other hand,
+the master is not to be used for reading, and so is not present in the global
+option, you can still update it by a query of this form:
+
+${lookup pgsql,servers=master/db/name/pw {UPDATE ...} }
+
+An older syntax places the servers specification before the query, semicolon
+separated:
+
+${lookup mysql{servers=master; UPDATE ...} }
+
+The new version avoids potential issues with tainted arguments in the query,
+for explicit expansion. Note: server specifications in list-style lookups are
+still problematic.
+
+
+9.24 Special MySQL features
+---------------------------
+
+For MySQL, an empty host name or the use of "localhost" in mysql_servers causes
+a connection to the server on the local host by means of a Unix domain socket.
+An alternate socket can be specified in parentheses. An option group name for
+MySQL option files can be specified in square brackets; the default value is
+"exim". The full syntax of each item in mysql_servers is:
+
+<hostname>::<port>(<socket name>)[<option group>]/<database>/<user>/<password>
+
+Any of the four sub-parts of the first field can be omitted. For normal use on
+the local host it can be left blank or set to just "localhost".
+
+No database need be supplied - but if it is absent here, it must be given in
+the queries.
+
+If a MySQL query is issued that does not request any data (an insert, update,
+or delete command), the result of the lookup is the number of rows affected.
+
+Warning: This can be misleading. If an update does not actually change anything
+(for example, setting a field to the value it already has), the result is zero
+because no rows are affected.
+
+
+9.25 Special PostgreSQL features
+--------------------------------
+
+PostgreSQL lookups can also use Unix domain socket connections to the database.
+This is usually faster and costs less CPU time than a TCP/IP connection.
+However it can be used only if the mail server runs on the same machine as the
+database server. A configuration line for PostgreSQL via Unix domain sockets
+looks like this:
+
+hide pgsql_servers = (/tmp/.s.PGSQL.5432)/db/user/password : ...
+
+In other words, instead of supplying a host name, a path to the socket is
+given. The path name is enclosed in parentheses so that its slashes aren't
+visually confused with the delimiters for the other server parameters.
+
+If a PostgreSQL query is issued that does not request any data (an insert,
+update, or delete command), the result of the lookup is the number of rows
+affected.
+
+
+9.26 More about SQLite
+----------------------
+
+SQLite is different to the other SQL lookups because a filename is required in
+addition to the SQL query. An SQLite database is a single file, and there is no
+daemon as in the other SQL databases.
+
+There are two ways of specifying the file. The first is is by using the 
+sqlite_dbfile main option. The second, which allows separate files for each
+query, is to use an option appended, comma-separated, to the "sqlite" lookup
+type word. The option is the word "file", then an equals, then the filename.
+The filename in this case cannot contain whitespace or open-brace charachters.
+
+A deprecated method is available, prefixing the query with the filename
+separated by white space. This means that the query cannot use any tainted
+values, as that taints the entire query including the filename - resulting in a
+refusal to open the file.
+
+In all the above cases the filename must be an absolute path.
+
+Here is a lookup expansion example:
+
+sqlite_dbfile = /some/thing/sqlitedb
+...
+${lookup sqlite {select name from aliases where id='userx';}}
+
+In a list, the syntax is similar. For example:
+
+domainlist relay_to_domains = sqlite;\
+   select * from relays where ip='$sender_host_address';
+
+The only character affected by the quote_sqlite operator is a single quote,
+which it doubles.
+
+The SQLite library handles multiple simultaneous accesses to the database
+internally. Multiple readers are permitted, but only one process can update at
+once. Attempts to access the database while it is being updated are rejected
+after a timeout period, during which the SQLite library waits for the lock to
+be released. In Exim, the default timeout is set to 5 seconds, but it can be
+changed by means of the sqlite_lock_timeout option.
+
+
+9.27 More about Redis
+---------------------
+
+Redis is a non-SQL database. Commands are simple get and set. Examples:
+
+${lookup redis{set keyname ${quote_redis:objvalue plus}}}
+${lookup redis{get keyname}}
+
+As of release 4.91, "lightweight" support for Redis Cluster is available.
+Requires redis_servers list to contain all the servers in the cluster, all of
+which must be reachable from the running exim instance. If the cluster has
+master/slave replication, the list must contain all the master and slave
+servers.
+
+When the Redis Cluster returns a "MOVED" response to a query, Exim does not
+immediately follow the redirection but treats the response as a DEFER, moving
+on to the next server in the redis_servers list until the correct server is
+reached.
+
+
+
+===============================================================================
+10. DOMAIN, HOST, ADDRESS, AND LOCAL PART LISTS
+
+A number of Exim configuration options contain lists of domains, hosts, email
+addresses, or local parts. For example, the hold_domains option contains a list
+of domains whose delivery is currently suspended. These lists are also used as
+data in ACL statements (see chapter 44), and as arguments to expansion
+conditions such as match_domain.
+
+Each item in one of these lists is a pattern to be matched against a domain,
+host, email address, or local part, respectively. In the sections below, the
+different types of pattern for each case are described, but first we cover some
+general facilities that apply to all four kinds of list.
+
+Note that other parts of Exim use a string list which does not support all the
+complexity available in domain, host, address and local part lists.
+
+
+10.1 Expansion of lists
+-----------------------
+
+Each list is expanded as a single string before it is used.
+
+Exception: the router headers_remove option, where list-item splitting is done
+before string-expansion.
+
+The result of expansion must be a list, possibly containing empty items, which
+is split up into separate items for matching. By default, colon is the
+separator character, but this can be varied if necessary. See sections 6.20 and
+6.22 for details of the list syntax; the second of these discusses the way to
+specify empty list items.
+
+If the string expansion is forced to fail, Exim behaves as if the item it is
+testing (domain, host, address, or local part) is not in the list. Other
+expansion failures cause temporary errors.
+
+If an item in a list is a regular expression, backslashes, dollars and possibly
+other special characters in the expression must be protected against
+misinterpretation by the string expander. The easiest way to do this is to use
+the "\N" expansion feature to indicate that the contents of the regular
+expression should not be expanded. For example, in an ACL you might have:
+
+deny senders = \N^\d{8}\w@.*\.baddomain\.example$\N : \
+               ${lookup{$domain}lsearch{/badsenders/bydomain}}
+
+The first item is a regular expression that is protected from expansion by "\
+N", whereas the second uses the expansion to obtain a list of unwanted senders
+based on the receiving domain.
+
+
+10.2 Negated items in lists
+---------------------------
+
+Items in a list may be positive or negative. Negative items are indicated by a
+leading exclamation mark, which may be followed by optional white space. A list
+defines a set of items (domains, etc). When Exim processes one of these lists,
+it is trying to find out whether a domain, host, address, or local part
+(respectively) is in the set that is defined by the list. It works like this:
+
+The list is scanned from left to right. If a positive item is matched, the
+subject that is being checked is in the set; if a negative item is matched, the
+subject is not in the set. If the end of the list is reached without the
+subject having matched any of the patterns, it is in the set if the last item
+was a negative one, but not if it was a positive one. For example, the list in
+
+domainlist relay_to_domains = !a.b.c : *.b.c
+
+matches any domain ending in .b.c except for a.b.c. Domains that match neither 
+a.b.c nor *.b.c do not match, because the last item in the list is positive.
+However, if the setting were
+
+domainlist relay_to_domains = !a.b.c
+
+then all domains other than a.b.c would match because the last item in the list
+is negative. In other words, a list that ends with a negative item behaves as
+if it had an extra item ":*" on the end.
+
+Another way of thinking about positive and negative items in lists is to read
+the connector as "or" after a positive item and as "and" after a negative item.
+
+
+10.3 File names in lists
+------------------------
+
+If an item in a domain, host, address, or local part list is an absolute
+filename (beginning with a slash character), each line of the file is read and
+processed as if it were an independent item in the list, except that further
+filenames are not allowed, and no expansion of the data from the file takes
+place. Empty lines in the file are ignored, and the file may also contain
+comment lines:
+
+  * For domain and host lists, if a # character appears anywhere in a line of
+    the file, it and all following characters are ignored.
+
+  * Because local parts may legitimately contain # characters, a comment in an
+    address list or local part list file is recognized only if # is preceded by
+    white space or the start of the line. For example:
+
+    not#comment@x.y.z   # but this is a comment
+
+Putting a filename in a list has the same effect as inserting each line of the
+file as an item in the list (blank lines and comments excepted). However, there
+is one important difference: the file is read each time the list is processed,
+so if its contents vary over time, Exim's behaviour changes.
+
+If a filename is preceded by an exclamation mark, the sense of any match within
+the file is inverted. For example, if
+
+hold_domains = !/etc/nohold-domains
+
+and the file contains the lines
+
+!a.b.c
+*.b.c
+
+then a.b.c is in the set of domains defined by hold_domains, whereas any domain
+matching "*.b.c" is not.
+
+
+10.4 An lsearch file is not an out-of-line list
+-----------------------------------------------
+
+As will be described in the sections that follow, lookups can be used in lists
+to provide indexed methods of checking list membership. There has been some
+confusion about the way lsearch lookups work in lists. Because an lsearch file
+contains plain text and is scanned sequentially, it is sometimes thought that
+it is allowed to contain wild cards and other kinds of non-constant pattern.
+This is not the case. The keys in an lsearch file are always fixed strings,
+just as for any other single-key lookup type.
+
+If you want to use a file to contain wild-card patterns that form part of a
+list, just give the filename on its own, without a search type, as described in
+the previous section. You could also use the wildlsearch or nwildlsearch, but
+there is no advantage in doing this.
+
+
+10.5 Results of list checking
+-----------------------------
+
+The primary result of doing a list check is a truth value. In some contexts
+additional information is stored about the list element that matched:
+
+hosts
+
+    A hosts ACL condition will store a result in the $host_data variable.
+
+local_parts
+
+    A local_parts router option or local_parts ACL condition will store a
+    result in the $local_part_data variable.
+
+domains
+
+    A domains router option or domains ACL condition will store a result in the
+    $domain_data variable.
+
+senders
+
+    A senders router option or senders ACL condition will store a result in the
+    $sender_data variable.
+
+recipients
+
+    A recipients ACL condition will store a result in the $recipient_data
+    variable.
+
+The detail of the additional information depends on the type of match and is
+given below as the value information.
+
+
+10.6 Named lists
+----------------
+
+A list of domains, hosts, email addresses, or local parts can be given a name
+which is then used to refer to the list elsewhere in the configuration. This is
+particularly convenient if the same list is required in several different
+places. It also allows lists to be given meaningful names, which can improve
+the readability of the configuration. For example, it is conventional to define
+a domain list called local_domains for all the domains that are handled locally
+on a host, using a configuration line such as
+
+domainlist local_domains = localhost:my.dom.example
+
+Named lists are referenced by giving their name preceded by a plus sign, so,
+for example, a router that is intended to handle local domains would be
+configured with the line
+
+domains = +local_domains
+
+The first router in a configuration is often one that handles all domains
+except the local ones, using a configuration with a negated item like this:
+
+dnslookup:
+  driver = dnslookup
+  domains = ! +local_domains
+  transport = remote_smtp
+  no_more
+
+The four kinds of named list are created by configuration lines starting with
+the words domainlist, hostlist, addresslist, or localpartlist, respectively.
+Then there follows the name that you are defining, followed by an equals sign
+and the list itself. For example:
+
+hostlist    relay_from_hosts = 192.168.23.0/24 : my.friend.example
+addresslist bad_senders = cdb;/etc/badsenders
+
+A named list may refer to other named lists:
+
+domainlist  dom1 = first.example : second.example
+domainlist  dom2 = +dom1 : third.example
+domainlist  dom3 = fourth.example : +dom2 : fifth.example
+
+Warning: If the last item in a referenced list is a negative one, the effect
+may not be what you intended, because the negation does not propagate out to
+the higher level. For example, consider:
+
+domainlist  dom1 = !a.b
+domainlist  dom2 = +dom1 : *.b
+
+The second list specifies "either in the dom1 list or *.b". The first list
+specifies just "not a.b", so the domain x.y matches it. That means it matches
+the second list as well. The effect is not the same as
+
+domainlist  dom2 = !a.b : *.b
+
+where x.y does not match. It's best to avoid negation altogether in referenced
+lists if you can.
+
+Some named list definitions may contain sensitive data, for example, passwords
+for accessing databases. To stop non-admin users from using the -bP command
+line option to read these values, you can precede the definition with the word
+"hide". For example:
+
+hide domainlist filter_for_domains = ldap;PASS=secret ldap::/// ...
+
+Named lists may have a performance advantage. When Exim is routing an address
+or checking an incoming message, it caches the result of tests on named lists.
+So, if you have a setting such as
+
+domains = +local_domains
+
+on several of your routers or in several ACL statements, the actual test is
+done only for the first one. However, the caching works only if there are no
+expansions within the list itself or any sublists that it references. In other
+words, caching happens only for lists that are known to be the same each time
+they are referenced.
+
+By default, there may be up to 16 named lists of each type. This limit can be
+extended by changing a compile-time variable. The use of domain and host lists
+is recommended for concepts such as local domains, relay domains, and relay
+hosts. The default configuration is set up like this.
+
+
+10.7 Named lists compared with macros
+-------------------------------------
+
+At first sight, named lists might seem to be no different from macros in the
+configuration file. However, macros are just textual substitutions. If you
+write
+
+ALIST = host1 : host2
+auth_advertise_hosts = !ALIST
+
+it probably won't do what you want, because that is exactly the same as
+
+auth_advertise_hosts = !host1 : host2
+
+Notice that the second host name is not negated. However, if you use a host
+list, and write
+
+hostlist alist = host1 : host2
+auth_advertise_hosts = ! +alist
+
+the negation applies to the whole list, and so that is equivalent to
+
+auth_advertise_hosts = !host1 : !host2
+
+
+10.8 Named list caching
+-----------------------
+
+While processing a message, Exim caches the result of checking a named list if
+it is sure that the list is the same each time. In practice, this means that
+the cache operates only if the list contains no $ characters, which guarantees
+that it will not change when it is expanded. Sometimes, however, you may have
+an expanded list that you know will be the same each time within a given
+message. For example:
+
+domainlist special_domains = \
+           ${lookup{$sender_host_address}cdb{/some/file}}
+
+This provides a list of domains that depends only on the sending host's IP
+address. If this domain list is referenced a number of times (for example, in
+several ACL lines, or in several routers) the result of the check is not cached
+by default, because Exim does not know that it is going to be the same list
+each time.
+
+By appending "_cache" to "domainlist" you can tell Exim to go ahead and cache
+the result anyway. For example:
+
+domainlist_cache special_domains = ${lookup{...
+
+If you do this, you should be absolutely sure that caching is going to do the
+right thing in all cases. When in doubt, leave it out.
+
+
+10.9 Domain lists
+-----------------
+
+Domain lists contain patterns that are to be matched against a mail domain. The
+following types of item may appear in domain lists:
+
+  * If a pattern consists of a single @ character, it matches the local host
+    name, as set by the primary_hostname option (or defaulted). This makes it
+    possible to use the same configuration file on several different hosts that
+    differ only in their names.
+
+    The value for a match will be the primary host name.
+
+  * If a pattern consists of the string "@[]" it matches an IP address enclosed
+    in square brackets (as in an email address that contains a domain literal),
+    but only if that IP address is recognized as local for email routing
+    purposes. The local_interfaces and extra_local_interfaces options can be
+    used to control which of a host's several IP addresses are treated as
+    local. In today's Internet, the use of domain literals is controversial;
+    see the allow_domain_literals main option.
+
+    The value for a match will be the string "@[]".
+
+  * If a pattern consists of the string "@mx_any" it matches any domain that
+    has an MX record pointing to the local host or to any host that is listed
+    in hosts_treat_as_local. The items "@mx_primary" and "@mx_secondary" are
+    similar, except that the first matches only when a primary MX target is the
+    local host, and the second only when no primary MX target is the local
+    host, but a secondary MX target is. "Primary" means an MX record with the
+    lowest preference value - there may of course be more than one of them.
+
+    The MX lookup that takes place when matching a pattern of this type is
+    performed with the resolver options for widening names turned off. Thus,
+    for example, a single-component domain will not be expanded by adding the
+    resolver's default domain. See the qualify_single and search_parents
+    options of the dnslookup router for a discussion of domain widening.
+
+    Sometimes you may want to ignore certain IP addresses when using one of
+    these patterns. You can specify this by following the pattern with "/ignore
+    ="<ip list>, where <ip list> is a list of IP addresses. These addresses are
+    ignored when processing the pattern (compare the ignore_target_hosts option
+    on a router). For example:
+
+    domains = @mx_any/ignore=127.0.0.1
+
+    This example matches any domain that has an MX record pointing to one of
+    the local host's IP addresses other than 127.0.0.1.
+
+    The list of IP addresses is in fact processed by the same code that
+    processes host lists, so it may contain CIDR-coded network specifications
+    and it may also contain negative items.
+
+    Because the list of IP addresses is a sublist within a domain list, you
+    have to be careful about delimiters if there is more than one address. Like
+    any other list, the default delimiter can be changed. Thus, you might have:
+
+    domains = @mx_any/ignore=<;127.0.0.1;0.0.0.0 : \
+              an.other.domain : ...
+
+    so that the sublist uses semicolons for delimiters. When IPv6 addresses are
+    involved, it is easiest to change the delimiter for the main list as well:
+
+    domains = <? @mx_any/ignore=<;127.0.0.1;::1 ? \
+              an.other.domain ? ...
+
+    The value for a match will be the list element string (starting "@mx_").
+
+  * If a pattern starts with an asterisk, the remaining characters of the
+    pattern are compared with the terminating characters of the domain. The use
+    of "*" in domain lists differs from its use in partial matching lookups. In
+    a domain list, the character following the asterisk need not be a dot,
+    whereas partial matching works only in terms of dot-separated components.
+    For example, a domain list item such as "*key.ex" matches donkey.ex as well
+    as cipher.key.ex.
+
+    The value for a match will be the list element string (starting with the
+    asterisk). Additionally, $0 will be set to the matched string and $1 to the
+    variable portion which the asterisk matched.
+
+  * If a pattern starts with a circumflex character, it is treated as a regular
+    expression, and matched against the domain using a regular expression
+    matching function. The circumflex is treated as part of the regular
+    expression. Email domains are case-independent, so this regular expression
+    match is by default case-independent, but you can make it case-dependent by
+    starting it with "(?-i)". References to descriptions of the syntax of
+    regular expressions are given in chapter 8.
+
+    Warning: Because domain lists are expanded before being processed, you must
+    escape any backslash and dollar characters in the regular expression, or
+    use the special "\N" sequence (see chapter 11) to specify that it is not to
+    be expanded (unless you really do want to build a regular expression by
+    expansion, of course).
+
+    The value for a match will be the list element string (starting with the
+    circumflex). Additionally, $0 will be set to the string matching the
+    regular expression, and $1 (onwards) to any submatches identified by
+    parentheses.
+
+  * If a pattern starts with the name of a single-key lookup type followed by a
+    semicolon (for example, "dbm;" or "lsearch;"), the remainder of the pattern
+    must be a filename in a suitable format for the lookup type. For example,
+    for "cdb;" it must be an absolute path:
+
+    domains = cdb;/etc/mail/local_domains.cdb
+
+    The appropriate type of lookup is done on the file using the domain name as
+    the key. In most cases, the value resulting from the lookup is not used;
+    Exim is interested only in whether or not the key is present in the file.
+    However, when a lookup is used for the domains option on a router or a 
+    domains condition in an ACL statement, the value is preserved in the
+    $domain_data variable and can be referred to in other router options or
+    other statements in the same ACL. The value will be untainted.
+
+    Note: If the data result of the lookup (as opposed to the key) is empty,
+    then this empty value is stored in $domain_data. The option to return the
+    key for the lookup, as the value, may be what is wanted.
+
+  * Any of the single-key lookup type names may be preceded by "partial"<n>"-",
+    where the <n> is optional, for example,
+
+    domains = partial-dbm;/partial/domains
+
+    This causes partial matching logic to be invoked; a description of how this
+    works is given in section 9.7.
+
+  * Any of the single-key lookup types may be followed by an asterisk. This
+    causes a default lookup for a key consisting of a single asterisk to be
+    done if the original lookup fails. This is not a useful feature when using
+    a domain list to select particular domains (because any domain would
+    match), but it might have value if the result of the lookup is being used
+    via the $domain_data expansion variable.
+
+  * If the pattern starts with the name of a query-style lookup type followed
+    by a semicolon (for example, "nisplus;" or "ldap;"), the remainder of the
+    pattern must be an appropriate query for the lookup type, as described in
+    chapter 9. For example:
+
+    hold_domains = mysql;select domain from holdlist \
+      where domain = '${quote_mysql:$domain}';
+
+    In most cases, the value resulting from the lookup is not used (so for an
+    SQL query, for example, it doesn't matter what field you select). Exim is
+    interested only in whether or not the query succeeds. However, when a
+    lookup is used for the domains option on a router, the value is preserved
+    in the $domain_data variable and can be referred to in other options. The
+    value will be untainted.
+
+  * If the pattern starts with the name of a lookup type of either kind
+    (single-key or query-style) it may be followed by a comma and options, The
+    options are lookup-type specific and consist of a comma-separated list.
+    Each item starts with a tag and and equals "=" sign.
+
+  * If none of the above cases apply, a caseless textual comparison is made
+    between the pattern and the domain.
+
+    The value for a match will be the list element string. Note that this is
+    commonly untainted (depending on the way the list was created).
+    Specifically, explicit text in the configuration file in not tainted. This
+    is a useful way of obtaining an untainted equivalent to the domain, for
+    later operations.
+
+    However if the list (including one-element lists) is created by expanding a
+    variable containing tainted data, it is tainted and so will the match value
+    be.
+
+Here is an example that uses several different kinds of pattern:
+
+domainlist funny_domains = \
+  @ : \
+  lib.unseen.edu : \
+  *.foundation.fict.example : \
+  \N^[1-2]\d{3}\.fict\.example$\N : \
+  partial-dbm;/opt/data/penguin/book : \
+  nis;domains.byname : \
+  nisplus;[name=$domain,status=local],domains.org_dir
+
+There are obvious processing trade-offs among the various matching modes. Using
+an asterisk is faster than a regular expression, and listing a few names
+explicitly probably is too. The use of a file or database lookup is expensive,
+but may be the only option if hundreds of names are required. Because the
+patterns are tested in order, it makes sense to put the most commonly matched
+patterns earlier.
+
+
+10.10 Host lists
+----------------
+
+Host lists are used to control what remote hosts are allowed to do. For
+example, some hosts may be allowed to use the local host as a relay, and some
+may be permitted to use the SMTP ETRN command. Hosts can be identified in two
+different ways, by name or by IP address. In a host list, some types of pattern
+are matched to a host name, and some are matched to an IP address. You need to
+be particularly careful with this when single-key lookups are involved, to
+ensure that the right value is being used as the key.
+
+
+10.11 Special host list patterns
+--------------------------------
+
+If a host list item is the empty string, it matches only when no remote host is
+involved. This is the case when a message is being received from a local
+process using SMTP on the standard input, that is, when a TCP/IP connection is
+not used.
+
+The special pattern "*" in a host list matches any host or no host. Neither the
+IP address nor the name is actually inspected.
+
+
+10.12 Host list patterns that match by IP address
+-------------------------------------------------
+
+If an IPv4 host calls an IPv6 host and the call is accepted on an IPv6 socket,
+the incoming address actually appears in the IPv6 host as "::ffff:"<v4address>.
+When such an address is tested against a host list, it is converted into a
+traditional IPv4 address first. (Not all operating systems accept IPv4 calls on
+IPv6 sockets, as there have been some security concerns.)
+
+The following types of pattern in a host list check the remote host by
+inspecting its IP address:
+
+  * If the pattern is a plain domain name (not a regular expression, not
+    starting with *, not a lookup of any kind), Exim calls the operating system
+    function to find the associated IP address(es). Exim uses the newer
+    getipnodebyname() function when available, otherwise gethostbyname(). This
+    typically causes a forward DNS lookup of the name. The result is compared
+    with the IP address of the subject host.
+
+    If there is a temporary problem (such as a DNS timeout) with the host name
+    lookup, a temporary error occurs. For example, if the list is being used in
+    an ACL condition, the ACL gives a "defer" response, usually leading to a
+    temporary SMTP error code. If no IP address can be found for the host name,
+    what happens is described in section 10.15 below.
+
+  * If the pattern is "@", the primary host name is substituted and used as a
+    domain name, as just described.
+
+  * If the pattern is an IP address, it is matched against the IP address of
+    the subject host. IPv4 addresses are given in the normal "dotted-quad"
+    notation. IPv6 addresses can be given in colon-separated format, but the
+    colons have to be doubled so as not to be taken as item separators when the
+    default list separator is used. IPv6 addresses are recognized even when
+    Exim is compiled without IPv6 support. This means that if they appear in a
+    host list on an IPv4-only host, Exim will not treat them as host names.
+    They are just addresses that can never match a client host.
+
+  * If the pattern is "@[]", it matches the IP address of any IP interface on
+    the local host. For example, if the local host is an IPv4 host with one
+    interface address 10.45.23.56, these two ACL statements have the same
+    effect:
+
+    accept hosts = 127.0.0.1 : 10.45.23.56
+    accept hosts = @[]
+
+  * If the pattern is an IP address followed by a slash and a mask length, for
+    example
+
+    10.11.42.0/24
+
+    , it is matched against the IP address of the subject host under the given
+    mask. This allows an entire network of hosts to be included (or excluded)
+    by a single item. The mask uses CIDR notation; it specifies the number of
+    address bits that must match, starting from the most significant end of the
+    address.
+
+    Note: The mask is not a count of addresses, nor is it the high number of a
+    range of addresses. It is the number of bits in the network portion of the
+    address. The above example specifies a 24-bit netmask, so it matches all
+    256 addresses in the 10.11.42.0 network. An item such as
+
+    192.168.23.236/31
+
+    matches just two addresses, 192.168.23.236 and 192.168.23.237. A mask value
+    of 32 for an IPv4 address is the same as no mask at all; just a single
+    address matches.
+
+    Here is another example which shows an IPv4 and an IPv6 network:
+
+    recipient_unqualified_hosts = 192.168.0.0/16: \
+                                  3ffe::ffff::836f::::/48
+
+    The doubling of list separator characters applies only when these items
+    appear inline in a host list. It is not required when indirecting via a
+    file. For example:
+
+    recipient_unqualified_hosts = /opt/exim/unqualnets
+
+    could make use of a file containing
+
+    172.16.0.0/12
+    3ffe:ffff:836f::/48
+
+    to have exactly the same effect as the previous example. When listing IPv6
+    addresses inline, it is usually more convenient to use the facility for
+    changing separator characters. This list contains the same two networks:
+
+    recipient_unqualified_hosts = <; 172.16.0.0/12; \
+                                     3ffe:ffff:836f::/48
+
+    The separator is changed to semicolon by the leading "<;" at the start of
+    the list.
+
+
+10.13 Host list patterns for single-key lookups by host address
+---------------------------------------------------------------
+
+When a host is to be identified by a single-key lookup of its complete IP
+address, the pattern takes this form:
+
+net-<single-key-search-type>;<search-data>
+
+For example:
+
+hosts_lookup = net-cdb;/hosts-by-ip.db
+
+The text form of the IP address of the subject host is used as the lookup key.
+IPv6 addresses are converted to an unabbreviated form, using lower case
+letters, with dots as separators because colon is the key terminator in lsearch
+files. [Colons can in fact be used in keys in lsearch files by quoting the
+keys, but this is a facility that was added later.] The data returned by the
+lookup is not used.
+
+Single-key lookups can also be performed using masked IP addresses, using
+patterns of this form:
+
+net<number>-<single-key-search-type>;<search-data>
+
+For example:
+
+net24-dbm;/networks.db
+
+The IP address of the subject host is masked using <number> as the mask length.
+A textual string is constructed from the masked value, followed by the mask,
+and this is used as the lookup key. For example, if the host's IP address is
+192.168.34.6, the key that is looked up for the above example is "192.168.34.0/
+24".
+
+When an IPv6 address is converted to a string, dots are normally used instead
+of colons, so that keys in lsearch files need not contain colons (which
+terminate lsearch keys). This was implemented some time before the ability to
+quote keys was made available in lsearch files. However, the more recently
+implemented iplsearch files do require colons in IPv6 keys (notated using the
+quoting facility) so as to distinguish them from IPv4 keys. For this reason,
+when the lookup type is iplsearch, IPv6 addresses are converted using colons
+and not dots. In all cases except IPv4-mapped IPv6, full, unabbreviated IPv6
+addresses are always used. The latter are converted to IPv4 addresses, in
+dotted-quad form.
+
+Ideally, it would be nice to tidy up this anomalous situation by changing to
+colons in all cases, given that quoting is now available for lsearch. However,
+this would be an incompatible change that might break some existing
+configurations.
+
+Warning: Specifying net32- (for an IPv4 address) or net128- (for an IPv6
+address) is not the same as specifying just net- without a number. In the
+former case the key strings include the mask value, whereas in the latter case
+the IP address is used on its own.
+
+
+10.14 Host list patterns that match by host name
+------------------------------------------------
+
+There are several types of pattern that require Exim to know the name of the
+remote host. These are either wildcard patterns or lookups by name. (If a
+complete hostname is given without any wildcarding, it is used to find an IP
+address to match against, as described in section 10.12 above.)
+
+If the remote host name is not already known when Exim encounters one of these
+patterns, it has to be found from the IP address. Although many sites on the
+Internet are conscientious about maintaining reverse DNS data for their hosts,
+there are also many that do not do this. Consequently, a name cannot always be
+found, and this may lead to unwanted effects. Take care when configuring host
+lists with wildcarded name patterns. Consider what will happen if a name cannot
+be found.
+
+Because of the problems of determining host names from IP addresses, matching
+against host names is not as common as matching against IP addresses.
+
+By default, in order to find a host name, Exim first does a reverse DNS lookup;
+if no name is found in the DNS, the system function (gethostbyaddr() or
+getipnodebyaddr() if available) is tried. The order in which these lookups are
+done can be changed by setting the host_lookup_order option. For security, once
+Exim has found one or more names, it looks up the IP addresses for these names
+and compares them with the IP address that it started with. Only those names
+whose IP addresses match are accepted. Any other names are discarded. If no
+names are left, Exim behaves as if the host name cannot be found. In the most
+common case there is only one name and one IP address.
+
+There are some options that control what happens if a host name cannot be
+found. These are described in section 10.15 below.
+
+As a result of aliasing, hosts may have more than one name. When processing any
+of the following types of pattern, all the host's names are checked:
+
+  * If a pattern starts with "*" the remainder of the item must match the end
+    of the host name. For example, "*.b.c" matches all hosts whose names end in
+    .b.c. This special simple form is provided because this is a very common
+    requirement. Other kinds of wildcarding require the use of a regular
+    expression.
+
+  * If the item starts with "^" it is taken to be a regular expression which is
+    matched against the host name. Host names are case-independent, so this
+    regular expression match is by default case-independent, but you can make
+    it case-dependent by starting it with "(?-i)". References to descriptions
+    of the syntax of regular expressions are given in chapter 8. For example,
+
+    ^(a|b)\.c\.d$
+
+    is a regular expression that matches either of the two hosts a.c.d or b.c.d
+    . When a regular expression is used in a host list, you must take care that
+    backslash and dollar characters are not misinterpreted as part of the
+    string expansion. The simplest way to do this is to use "\N" to mark that
+    part of the string as non-expandable. For example:
+
+    sender_unqualified_hosts = \N^(a|b)\.c\.d$\N : ....
+
+    Warning: If you want to match a complete host name, you must include the
+    "$" terminating metacharacter in the regular expression, as in the above
+    example. Without it, a match at the start of the host name is all that is
+    required.
+
+
+10.15 Behaviour when an IP address or name cannot be found
+----------------------------------------------------------
+
+While processing a host list, Exim may need to look up an IP address from a
+name (see section 10.12), or it may need to look up a host name from an IP
+address (see section 10.14). In either case, the behaviour when it fails to
+find the information it is seeking is the same.
+
+Note: This section applies to permanent lookup failures. It does not apply to
+temporary DNS errors, whose handling is described in the next section.
+
+Exim parses a host list from left to right. If it encounters a permanent lookup
+failure in any item in the host list before it has found a match, Exim treats
+it as a failure and the default behavior is as if the host does not match the
+list. This may not always be what you want to happen. To change Exim's
+behaviour, the special items "+include_unknown" or "+ignore_unknown" may appear
+in the list (at top level - they are not recognized in an indirected file).
+
+  * If any item that follows "+include_unknown" requires information that
+    cannot found, Exim behaves as if the host does match the list. For example,
+
+    host_reject_connection = +include_unknown:*.enemy.ex
+
+    rejects connections from any host whose name matches "*.enemy.ex", and also
+    any hosts whose name it cannot find.
+
+  * If any item that follows "+ignore_unknown" requires information that cannot
+    be found, Exim ignores that item and proceeds to the rest of the list. For
+    example:
+
+    accept hosts = +ignore_unknown : friend.example : \
+                   192.168.4.5
+
+    accepts from any host whose name is friend.example and from 192.168.4.5,
+    whether or not its host name can be found. Without "+ignore_unknown", if no
+    name can be found for 192.168.4.5, it is rejected.
+
+Both "+include_unknown" and "+ignore_unknown" may appear in the same list. The
+effect of each one lasts until the next, or until the end of the list.
+
+
+10.16 Mixing wildcarded host names and addresses in host lists
+--------------------------------------------------------------
+
+This section explains the host/ip processing logic with the same concepts as
+the previous section, but specifically addresses what happens when a wildcarded
+hostname is one of the items in the hostlist.
+
+  * If you have name lookups or wildcarded host names and IP addresses in the
+    same host list, you should normally put the IP addresses first. For
+    example, in an ACL you could have:
+
+    accept hosts = 10.9.8.7 : *.friend.example
+
+    The reason you normally would order it this way lies in the left-to-right
+    way that Exim processes lists. It can test IP addresses without doing any
+    DNS lookups, but when it reaches an item that requires a host name, it
+    fails if it cannot find a host name to compare with the pattern. If the
+    above list is given in the opposite order, the accept statement fails for a
+    host whose name cannot be found, even if its IP address is 10.9.8.7.
+
+  * If you really do want to do the name check first, and still recognize the
+    IP address, you can rewrite the ACL like this:
+
+    accept hosts = *.friend.example
+    accept hosts = 10.9.8.7
+
+    If the first accept fails, Exim goes on to try the second one. See chapter
+    44 for details of ACLs. Alternatively, you can use "+ignore_unknown", which
+    was discussed in depth in the first example in this section.
+
+
+10.17 Temporary DNS errors when looking up host information
+-----------------------------------------------------------
+
+A temporary DNS lookup failure normally causes a defer action (except when 
+dns_again_means_nonexist converts it into a permanent error). However, host
+lists can include "+ignore_defer" and "+include_defer", analogous to
+"+ignore_unknown" and "+include_unknown", as described in the previous section.
+These options should be used with care, probably only in non-critical host
+lists such as whitelists.
+
+
+10.18 Host list patterns for single-key lookups by host name
+------------------------------------------------------------
+
+If a pattern is of the form
+
+<single-key-search-type>;<search-data>
+
+for example
+
+dbm;/host/accept/list
+
+a single-key lookup is performed, using the host name as its key. If the lookup
+succeeds, the host matches the item. The actual data that is looked up is not
+used.
+
+Reminder: With this kind of pattern, you must have host names as keys in the
+file, not IP addresses. If you want to do lookups based on IP addresses, you
+must precede the search type with "net-" (see section 10.13). There is,
+however, no reason why you could not use two items in the same list, one doing
+an address lookup and one doing a name lookup, both using the same file.
+
+
+10.19 Host list patterns for query-style lookups
+------------------------------------------------
+
+If a pattern is of the form
+
+<query-style-search-type>;<query>
+
+the query is obeyed, and if it succeeds, the host matches the item. The actual
+data that is looked up is not used. The variables $sender_host_address and
+$sender_host_name can be used in the query. For example:
+
+hosts_lookup = pgsql;\
+  select ip from hostlist where ip='$sender_host_address'
+
+The value of $sender_host_address for an IPv6 address contains colons. You can
+use the sg expansion item to change this if you need to. If you want to use
+masked IP addresses in database queries, you can use the mask expansion
+operator.
+
+If the query contains a reference to $sender_host_name, Exim automatically
+looks up the host name if it has not already done so. (See section 10.14 for
+comments on finding host names.)
+
+Historical note: prior to release 4.30, Exim would always attempt to find a
+host name before running the query, unless the search type was preceded by
+"net-". This is no longer the case. For backwards compatibility, "net-" is
+still recognized for query-style lookups, but its presence or absence has no
+effect. (Of course, for single-key lookups, "net-" is important. See section
+10.13.)
+
+
+10.20 Address lists
+-------------------
+
+Address lists contain patterns that are matched against mail addresses. There
+is one special case to be considered: the sender address of a bounce message is
+always empty. You can test for this by providing an empty item in an address
+list. For example, you can set up a router to process bounce messages by using
+this option setting:
+
+senders = :
+
+The presence of the colon creates an empty item. If you do not provide any
+data, the list is empty and matches nothing. The empty sender can also be
+detected by a regular expression that matches an empty string, and by a
+query-style lookup that succeeds when $sender_address is empty.
+
+Non-empty items in an address list can be straightforward email addresses. For
+example:
+
+senders = jbc@askone.example : hs@anacreon.example
+
+A certain amount of wildcarding is permitted. If a pattern contains an @
+character, but is not a regular expression and does not begin with a
+semicolon-terminated lookup type (described below), the local part of the
+subject address is compared with the local part of the pattern, which may start
+with an asterisk. If the local parts match, the domain is checked in exactly
+the same way as for a pattern in a domain list. For example, the domain can be
+wildcarded, refer to a named list, or be a lookup:
+
+deny senders = *@*.spamming.site:\
+               *@+hostile_domains:\
+               bozo@partial-lsearch;/list/of/dodgy/sites:\
+               *@dbm;/bad/domains.db
+
+If a local part that begins with an exclamation mark is required, it has to be
+specified using a regular expression, because otherwise the exclamation mark is
+treated as a sign of negation, as is standard in lists.
+
+If a non-empty pattern that is not a regular expression or a lookup does not
+contain an @ character, it is matched against the domain part of the subject
+address. The only two formats that are recognized this way are a literal
+domain, or a domain pattern that starts with *. In both these cases, the effect
+is the same as if "*@" preceded the pattern. For example:
+
+deny senders = enemy.domain : *.enemy.domain
+
+The following kinds of more complicated address list pattern can match any
+address, including the empty address that is characteristic of bounce message
+senders:
+
+  * If (after expansion) a pattern starts with "^", a regular expression match
+    is done against the complete address, with the pattern as the regular
+    expression. You must take care that backslash and dollar characters are not
+    misinterpreted as part of the string expansion. The simplest way to do this
+    is to use "\N" to mark that part of the string as non-expandable. For
+    example:
+
+    deny senders = \N^.*this.*@example\.com$\N : \
+                   \N^\d{8}.+@spamhaus.example$\N : ...
+
+    The "\N" sequences are removed by the expansion, so these items do indeed
+    start with "^" by the time they are being interpreted as address patterns.
+
+  * Complete addresses can be looked up by using a pattern that starts with a
+    lookup type terminated by a semicolon, followed by the data for the lookup.
+    For example:
+
+    deny senders = cdb;/etc/blocked.senders : \
+      mysql;select address from blocked where \
+      address='${quote_mysql:$sender_address}'
+
+    Both query-style and single-key lookup types can be used. For a single-key
+    lookup type, Exim uses the complete address as the key. However, empty keys
+    are not supported for single-key lookups, so a match against the empty
+    address always fails. This restriction does not apply to query-style
+    lookups.
+
+    Partial matching for single-key lookups (section 9.7) cannot be used, and
+    is ignored if specified, with an entry being written to the panic log. 
+    However, you can configure lookup defaults, as described in section 9.6,
+    but this is useful only for the "*@" type of default. For example, with
+    this lookup:
+
+    accept senders = lsearch*@;/some/file
+
+    the file could contains lines like this:
+
+    user1@domain1.example
+    *@domain2.example
+
+    and for the sender address nimrod@jaeger.example, the sequence of keys that
+    are tried is:
+
+    nimrod@jaeger.example
+    *@jaeger.example
+    *
+
+    Warning 1: Do not include a line keyed by "*" in the file, because that
+    would mean that every address matches, thus rendering the test useless.
+
+    Warning 2: Do not confuse these two kinds of item:
+
+    deny recipients = dbm*@;/some/file
+    deny recipients = *@dbm;/some/file
+
+    The first does a whole address lookup, with defaulting, as just described,
+    because it starts with a lookup type. The second matches the local part and
+    domain independently, as described in a bullet point below.
+
+The following kinds of address list pattern can match only non-empty addresses.
+If the subject address is empty, a match against any of these pattern types
+always fails.
+
+  * If a pattern starts with "@@" followed by a single-key lookup item (for
+    example, "@@lsearch;/some/file"), the address that is being checked is
+    split into a local part and a domain. The domain is looked up in the file.
+    If it is not found, there is no match. If it is found, the data that is
+    looked up from the file is treated as a colon-separated list of local part
+    patterns, each of which is matched against the subject local part in turn.
+
+    The lookup may be a partial one, and/or one involving a search for a
+    default keyed by "*" (see section 9.6). The local part patterns that are
+    looked up can be regular expressions or begin with "*", or even be further
+    lookups. They may also be independently negated. For example, with
+
+    deny senders = @@dbm;/etc/reject-by-domain
+
+    the data from which the DBM file is built could contain lines like
+
+    baddomain.com:  !postmaster : *
+
+    to reject all senders except postmaster from that domain.
+
+    If a local part that actually begins with an exclamation mark is required,
+    it has to be specified using a regular expression. In lsearch files, an
+    entry may be split over several lines by indenting the second and
+    subsequent lines, but the separating colon must still be included at line
+    breaks. White space surrounding the colons is ignored. For example:
+
+    aol.com:  spammer1 : spammer2 : ^[0-9]+$ :
+      spammer3 : spammer4
+
+    As in all colon-separated lists in Exim, a colon can be included in an item
+    by doubling.
+
+    If the last item in the list starts with a right angle-bracket, the
+    remainder of the item is taken as a new key to look up in order to obtain a
+    continuation list of local parts. The new key can be any sequence of
+    characters. Thus one might have entries like
+
+    aol.com: spammer1 : spammer 2 : >*
+    xyz.com: spammer3 : >*
+    *:       ^\d{8}$
+
+    in a file that was searched with @@dbm*, to specify a match for 8-digit
+    local parts for all domains, in addition to the specific local parts listed
+    for each domain. Of course, using this feature costs another lookup each
+    time a chain is followed, but the effort needed to maintain the data is
+    reduced.
+
+    It is possible to construct loops using this facility, and in order to
+    catch them, the chains may be no more than fifty items long.
+
+  * The @@<lookup> style of item can also be used with a query-style lookup,
+    but in this case, the chaining facility is not available. The lookup can
+    only return a single list of local parts.
+
+Warning: There is an important difference between the address list items in
+these two examples:
+
+senders = +my_list
+senders = *@+my_list
+
+In the first one, "my_list" is a named address list, whereas in the second
+example it is a named domain list.
+
+
+10.21 Case of letters in address lists
+--------------------------------------
+
+Domains in email addresses are always handled caselessly, but for local parts
+case may be significant on some systems (see caseful_local_part for how Exim
+deals with this when routing addresses). However, RFC 2505 (Anti-Spam
+Recommendations for SMTP MTAs) suggests that matching of addresses to blocking
+lists should be done in a case-independent manner. Since most address lists in
+Exim are used for this kind of control, Exim attempts to do this by default.
+
+The domain portion of an address is always lowercased before matching it to an
+address list. The local part is lowercased by default, and any string
+comparisons that take place are done caselessly. This means that the data in
+the address list itself, in files included as plain filenames, and in any file
+that is looked up using the "@@" mechanism, can be in any case. However, the
+keys in files that are looked up by a search type other than lsearch (which
+works caselessly) must be in lower case, because these lookups are not
+case-independent.
+
+To allow for the possibility of caseful address list matching, if an item in an
+address list is the string "+caseful", the original case of the local part is
+restored for any comparisons that follow, and string comparisons are no longer
+case-independent. This does not affect the domain, which remains in lower case.
+However, although independent matches on the domain alone are still performed
+caselessly, regular expressions that match against an entire address become
+case-sensitive after "+caseful" has been seen.
+
+
+10.22 Local part lists
+----------------------
+
+These behave in the same way as domain and host lists, with the following
+changes:
+
+Case-sensitivity in local part lists is handled in the same way as for address
+lists, as just described. The "+caseful" item can be used if required. In a
+setting of the local_parts option in a router with caseful_local_part set
+false, the subject is lowercased and the matching is initially
+case-insensitive. In this case, "+caseful" will restore case-sensitive matching
+in the local part list, but not elsewhere in the router. If caseful_local_part
+is set true in a router, matching in the local_parts option is case-sensitive
+from the start.
+
+If a local part list is indirected to a file (see section 10.3), comments are
+handled in the same way as address lists - they are recognized only if the # is
+preceded by white space or the start of the line. Otherwise, local part lists
+are matched in the same way as domain lists, except that the special items that
+refer to the local host ("@", "@[]", "@mx_any", "@mx_primary", and
+"@mx_secondary") are not recognized. Refer to section 10.9 for details of the
+other available item types.
+
+
+
+===============================================================================
+11. STRING EXPANSIONS
+
+Many strings in Exim's runtime configuration are expanded before use. Some of
+them are expanded every time they are used; others are expanded only once.
+
+When a string is being expanded it is copied verbatim from left to right except
+when a dollar or backslash character is encountered. A dollar specifies the
+start of a portion of the string that is interpreted and replaced as described
+below in section 11.5 onwards. Backslash is used as an escape character, as
+described in the following section.
+
+Whether a string is expanded depends upon the context. Usually this is solely
+dependent upon the option for which a value is sought; in this documentation,
+options for which string expansion is performed are marked with * after the
+data type. ACL rules always expand strings. A couple of expansion conditions do
+not expand some of the brace-delimited branches, for security reasons, and
+expansion of data deriving from the sender ("tainted data") is not permitted
+(including acessing a file using a tainted name).
+
+Common ways of obtaining untainted equivalents of variables with tainted values
+come down to using the tainted value as a lookup key in a trusted database.
+This database could be the filesystem structure, or the password file, or
+accessed via a DBMS. Specific methods are indexed under "de-tainting".
+
+
+11.1 Literal text in expanded strings
+-------------------------------------
+
+An uninterpreted dollar can be included in an expanded string by putting a
+backslash in front of it. A backslash can be used to prevent any special
+character being treated specially in an expansion, including backslash itself.
+If the string appears in quotes in the configuration file, two backslashes are
+required because the quotes themselves cause interpretation of backslashes when
+the string is read in (see section 6.17).
+
+A portion of the string can specified as non-expandable by placing it between
+two occurrences of "\N". This is particularly useful for protecting regular
+expressions, which often contain backslashes and dollar signs. For example:
+
+deny senders = \N^\d{8}[a-z]@some\.site\.example$\N
+
+On encountering the first "\N", the expander copies subsequent characters
+without interpretation until it reaches the next "\N" or the end of the string.
+
+
+11.2 Character escape sequences in expanded strings
+---------------------------------------------------
+
+A backslash followed by one of the letters "n", "r", or "t" in an expanded
+string is recognized as an escape sequence for the character newline, carriage
+return, or tab, respectively. A backslash followed by up to three octal digits
+is recognized as an octal encoding for a single character, and a backslash
+followed by "x" and up to two hexadecimal digits is a hexadecimal encoding.
+
+These escape sequences are also recognized in quoted strings when they are read
+in. Their interpretation in expansions as well is useful for unquoted strings,
+and for other cases such as looked-up strings that are then expanded.
+
+
+11.3 Testing string expansions
+------------------------------
+
+Many expansions can be tested by calling Exim with the -be option. This takes
+the command arguments, or lines from the standard input if there are no
+arguments, runs them through the string expansion code, and writes the results
+to the standard output. Variables based on configuration values are set up, but
+since no message is being processed, variables such as $local_part have no
+value. Nevertheless the -be option can be useful for checking out file and
+database lookups, and the use of expansion operators such as sg, substr and 
+nhash.
+
+Exim gives up its root privilege when it is called with the -be option, and
+instead runs under the uid and gid it was called with, to prevent users from
+using -be for reading files to which they do not have access.
+
+If you want to test expansions that include variables whose values are taken
+from a message, there are two other options that can be used. The -bem option
+is like -be except that it is followed by a filename. The file is read as a
+message before doing the test expansions. For example:
+
+exim -bem /tmp/test.message '$h_subject:'
+
+The -Mset option is used in conjunction with -be and is followed by an Exim
+message identifier. For example:
+
+exim -be -Mset 1GrA8W-0004WS-LQ '$recipients'
+
+This loads the message from Exim's spool before doing the test expansions, and
+is therefore restricted to admin users.
+
+
+11.4 Forced expansion failure
+-----------------------------
+
+A number of expansions that are described in the following section have
+alternative "true" and "false" substrings, enclosed in brace characters (which
+are sometimes called "curly brackets"). Which of the two strings is used
+depends on some condition that is evaluated as part of the expansion. If,
+instead of a "false" substring, the word "fail" is used (not in braces), the
+entire string expansion fails in a way that can be detected by the code that
+requested the expansion. This is called "forced expansion failure", and its
+consequences depend on the circumstances. In some cases it is no different from
+any other expansion failure, but in others a different action may be taken.
+Such variations are mentioned in the documentation of the option that is being
+expanded.
+
+
+11.5 Expansion items
+--------------------
+
+The following items are recognized in expanded strings. White space may be used
+between sub-items that are keywords or substrings enclosed in braces inside an
+outer set of braces, to improve readability. Warning: Within braces, white
+space is significant.
+
+$<variable name> or ${<variable name>}
+
+    Substitute the contents of the named variable, for example:
+
+    $local_part
+    ${domain}
+
+    The second form can be used to separate the name from subsequent
+    alphanumeric characters. This form (using braces) is available only for
+    variables; it does not apply to message headers. The names of the variables
+    are given in section 11.9 below. If the name of a non-existent variable is
+    given, the expansion fails.
+
+${<op>:<string>}
+
+    The string is first itself expanded, and then the operation specified by <
+    op> is applied to it. For example:
+
+    ${lc:$local_part}
+
+    The string starts with the first character after the colon, which may be
+    leading white space. A list of operators is given in section 11.6 below.
+    The operator notation is used for simple expansion items that have just one
+    argument, because it reduces the number of braces and therefore makes the
+    string easier to understand.
+
+$bheader_<header name>: or $bh_<header name>:
+
+    This item inserts "basic" header lines. It is described with the header
+    expansion item below.
+
+${acl{<name>}{<arg>}...}
+
+    The name and zero to nine argument strings are first expanded separately.
+    The expanded arguments are assigned to the variables $acl_arg1 to $acl_arg9
+    in order. Any unused are made empty. The variable $acl_narg is set to the
+    number of arguments. The named ACL (see chapter 44) is called and may use
+    the variables; if another acl expansion is used the values are restored
+    after it returns. If the ACL sets a value using a "message =" modifier and
+    returns accept or deny, the value becomes the result of the expansion. If
+    no message is set and the ACL returns accept or deny the expansion result
+    is an empty string. If the ACL returns defer the result is a forced-fail.
+    Otherwise the expansion fails.
+
+${authresults{<authserv-id>}}
+
+    This item returns a string suitable for insertion as an 
+    Authentication-Results: header line. The given <authserv-id> is included in
+    the result; typically this will be a domain name identifying the system
+    performing the authentications. Methods that might be present in the result
+    include:
+
+    none
+    iprev
+    auth
+    spf
+    dkim
+
+    Example use (as an ACL modifier):
+
+          add_header = :at_start:${authresults {$primary_hostname}}
+
+    This is safe even if no authentication results are available.
+
+${certextract{<field>}{<certificate>}{<string2>}{<string3>}}
+
+    The <certificate> must be a variable of type certificate. The field name is
+    expanded and used to retrieve the relevant field from the certificate.
+    Supported fields are:
+
+    version        
+    serial_number  
+    subject         RFC4514 DN
+    issuer          RFC4514 DN
+    notbefore       time
+    notafter        time
+    sig_algorithm  
+    signature      
+    subj_altname    tagged list
+    ocsp_uri        list
+    crl_uri         list
+
+    If the field is found, <string2> is expanded, and replaces the whole item;
+    otherwise <string3> is used. During the expansion of <string2> the variable
+    $value contains the value that has been extracted. Afterwards, it is
+    restored to any previous value it might have had.
+
+    If {<string3>} is omitted, the item is replaced by an empty string if the
+    key is not found. If {<string2>} is also omitted, the value that was
+    extracted is used.
+
+    Some field names take optional modifiers, appended and separated by commas.
+
+    The field selectors marked as "RFC4514" above output a Distinguished Name
+    string which is not quite parseable by Exim as a comma-separated tagged
+    list (the exceptions being elements containing commas). RDN elements of a
+    single type may be selected by a modifier of the type label; if so the
+    expansion result is a list (newline-separated by default). The separator
+    may be changed by another modifier of a right angle-bracket followed
+    immediately by the new separator. Recognised RDN type labels include "CN",
+    "O", "OU" and "DC".
+
+    The field selectors marked as "time" above take an optional modifier of
+    "int" for which the result is the number of seconds since epoch. Otherwise
+    the result is a human-readable string in the timezone selected by the main
+    "timezone" option.
+
+    The field selectors marked as "list" above return a list, newline-separated
+    by default, (embedded separator characters in elements are doubled). The
+    separator may be changed by a modifier of a right angle-bracket followed
+    immediately by the new separator.
+
+    The field selectors marked as "tagged" above prefix each list element with
+    a type string and an equals sign. Elements of only one type may be selected
+    by a modifier which is one of "dns", "uri" or "mail"; if so the element
+    tags are omitted.
+
+    If not otherwise noted field values are presented in human-readable form.
+
+${dlfunc{<file>}{<function>}{<arg>}{<arg>}...}
+
+    This expansion dynamically loads and then calls a locally-written C
+    function. This functionality is available only if Exim is compiled with
+
+    EXPAND_DLFUNC=yes
+
+    set in Local/Makefile. Once loaded, Exim remembers the dynamically loaded
+    object so that it doesn't reload the same object file in the same Exim
+    process (but of course Exim does start new processes frequently).
+
+    There may be from zero to eight arguments to the function.
+
+    When compiling a local function that is to be called in this way, first
+    DLFUNC_IMPL should be defined, and second local_scan.h should be included.
+    The Exim variables and functions that are defined by that API are also
+    available for dynamically loaded functions. The function itself must have
+    the following type:
+
+    int dlfunction(uschar **yield, int argc, uschar *argv[])
+
+    Where "uschar" is a typedef for "unsigned char" in local_scan.h. The
+    function should return one of the following values:
+
+    "OK": Success. The string that is placed in the variable yield is put into
+    the expanded string that is being built.
+
+    "FAIL": A non-forced expansion failure occurs, with the error message taken
+    from yield, if it is set.
+
+    "FAIL_FORCED": A forced expansion failure occurs, with the error message
+    taken from yield if it is set.
+
+    "ERROR": Same as "FAIL", except that a panic log entry is written.
+
+    When compiling a function that is to be used in this way with gcc, you need
+    to add -shared to the gcc command. Also, in the Exim build-time
+    configuration, you must add -export-dynamic to EXTRALIBS.
+
+${env{<key>}{<string1>}{<string2>}}
+
+    The key is first expanded separately, and leading and trailing white space
+    removed. This is then searched for as a name in the environment. If a
+    variable is found then its value is placed in $value and <string1> is
+    expanded, otherwise <string2> is expanded.
+
+    Instead of {<string2>} the word "fail" (not in curly brackets) can appear,
+    for example:
+
+    ${env{USER}{$value} fail }
+
+    This forces an expansion failure (see section 11.4); {<string1>} must be
+    present for "fail" to be recognized.
+
+    If {<string2>} is omitted an empty string is substituted on search failure.
+    If {<string1>} is omitted the search result is substituted on search
+    success.
+
+    The environment is adjusted by the keep_environment and add_environment
+    main section options.
+
+${extract{<key>}{<string1>}{<string2>}{<string3>}}
+
+    The key and <string1> are first expanded separately. Leading and trailing
+    white space is removed from the key (but not from any of the strings). The
+    key must not be empty and must not consist entirely of digits. The expanded
+    <string1> must be of the form:
+
+    <key1> = <value1>  <key2> = <value2> ...
+
+    where the equals signs and spaces (but not both) are optional. If any of
+    the values contain white space, they must be enclosed in double quotes, and
+    any values that are enclosed in double quotes are subject to escape
+    processing as described in section 6.17. The expanded <string1> is searched
+    for the value that corresponds to the key. The search is case-insensitive.
+    If the key is found, <string2> is expanded, and replaces the whole item;
+    otherwise <string3> is used. During the expansion of <string2> the variable
+    $value contains the value that has been extracted. Afterwards, it is
+    restored to any previous value it might have had.
+
+    If {<string3>} is omitted, the item is replaced by an empty string if the
+    key is not found. If {<string2>} is also omitted, the value that was
+    extracted is used. Thus, for example, these two expansions are identical,
+    and yield "2001":
+
+    ${extract{gid}{uid=1984 gid=2001}}
+    ${extract{gid}{uid=1984 gid=2001}{$value}}
+
+    Instead of {<string3>} the word "fail" (not in curly brackets) can appear,
+    for example:
+
+    ${extract{Z}{A=... B=...}{$value} fail }
+
+    This forces an expansion failure (see section 11.4); {<string2>} must be
+    present for "fail" to be recognized.
+
+${extract json{<key>}{<string1>}{<string2>}{<string3>}}, ${extract jsons{<key>}
+{<string1>}{<string2>}{<string3>}}
+
+    The key and <string1> are first expanded separately. Leading and trailing
+    white space is removed from the key (but not from any of the strings). The
+    key must not be empty and must not consist entirely of digits. The expanded
+    <string1> must be of the form:
+
+    { <"key1"> : <value1> ,  <"key2"> , <value2> ... }
+
+    The braces, commas and colons, and the quoting of the member name are
+    required; the spaces are optional. Matching of the key against the member
+    names is done case-sensitively. For the "json" variant, if a returned value
+    is a JSON string, it retains its leading and trailing quotes. For the
+    "jsons" variant, which is intended for use with JSON strings, the leading
+    and trailing quotes are removed from the returned value.
+
+    The results of matching are handled as above.
+
+${extract{<number>}{<separators>}{<string1>}{<string2>}{<string3>}}
+
+    The <number> argument must consist entirely of decimal digits, apart from
+    leading and trailing white space, which is ignored. This is what
+    distinguishes this form of extract from the previous kind. It behaves in
+    the same way, except that, instead of extracting a named field, it extracts
+    from <string1> the field whose number is given as the first argument. You
+    can use $value in <string2> or "fail" instead of <string3> as before.
+
+    The fields in the string are separated by any one of the characters in the
+    separator string. These may include space or tab characters. The first
+    field is numbered one. If the number is negative, the fields are counted
+    from the end of the string, with the rightmost one numbered -1. If the
+    number given is zero, the entire string is returned. If the modulus of the
+    number is greater than the number of fields in the string, the result is
+    the expansion of <string3>, or the empty string if <string3> is not
+    provided. For example:
+
+    ${extract{2}{:}{x:42:99:& Mailer::/bin/bash}}
+
+    yields "42", and
+
+    ${extract{-4}{:}{x:42:99:& Mailer::/bin/bash}}
+
+    yields "99". Two successive separators mean that the field between them is
+    empty (for example, the fifth field above).
+
+${extract json {<number>}}{<string1>}{<string2>}{<string3>}}, ${extract jsons{<
+number>}}{<string1>}{<string2>}{<string3>}}
+
+    The <number> argument must consist entirely of decimal digits, apart from
+    leading and trailing white space, which is ignored.
+
+    Field selection and result handling is as above; there is no choice of
+    field separator. For the "json" variant, if a returned value is a JSON
+    string, it retains its leading and trailing quotes. For the "jsons"
+    variant, which is intended for use with JSON strings, the leading and
+    trailing quotes are removed from the returned value.
+
+${filter{<string>}{<condition>}}
+
+    After expansion, <string> is interpreted as a list, colon-separated by
+    default, but the separator can be changed in the usual way (6.21). For each
+    item in this list, its value is place in $item, and then the condition is
+    evaluated. If the condition is true, $item is added to the output as an
+    item in a new list; if the condition is false, the item is discarded. The
+    separator used for the output list is the same as the one used for the
+    input, but a separator setting is not included in the output. For example:
+
+    ${filter{a:b:c}{!eq{$item}{b}}}
+
+    yields "a:c". At the end of the expansion, the value of $item is restored
+    to what it was before. See also the map and reduce expansion items.
+
+${hash{<string1>}{<string2>}{<string3>}}
+
+    This is a textual hashing function, and was the first to be implemented in
+    early versions of Exim. In current releases, there are other hashing
+    functions (numeric, MD5, and SHA-1), which are described below.
+
+    The first two strings, after expansion, must be numbers. Call them <m> and
+    <n>. If you are using fixed values for these numbers, that is, if <string1>
+    and <string2> do not change when they are expanded, you can use the simpler
+    operator notation that avoids some of the braces:
+
+    ${hash_<n>_<m>:<string>}
+
+    The second number is optional (in both notations). If <n> is greater than
+    or equal to the length of the string, the expansion item returns the
+    string. Otherwise it computes a new string of length <n> by applying a
+    hashing function to the string. The new string consists of characters taken
+    from the first <m> characters of the string
+
+    abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQWRSTUVWXYZ0123456789
+
+    If <m> is not present the value 26 is used, so that only lower case letters
+    appear. For example:
+
+    $hash{3}{monty}}              yields  jmg
+    $hash{5}{monty}}              yields  monty
+    $hash{4}{62}{monty python}}   yields  fbWx
+
+$header_<header name>: or $h_<header name>:, $bheader_<header name>: or $bh_<
+header name>:, $lheader_<header name>: or $lh_<header name>:, $rheader_<
+header name>: or $rh_<header name>:
+
+    Substitute the contents of the named message header line, for example
+
+    $header_reply-to:
+
+    The newline that terminates a header line is not included in the expansion,
+    but internal newlines (caused by splitting the header line over several
+    physical lines) may be present.
+
+    The difference between the four pairs of expansions is in the way the data
+    in the header line is interpreted.
+
+      o rheader gives the original "raw" content of the header line, with no
+        processing at all, and without the removal of leading and trailing
+        white space.
+
+      o lheader gives a colon-separated list, one element per header when there
+        are multiple headers with a given name. Any embedded colon characters
+        within an element are doubled, so normal Exim list-processing
+        facilities can be used. The terminating newline of each element is
+        removed; in other respects the content is "raw".
+
+      o bheader removes leading and trailing white space, and then decodes
+        base64 or quoted-printable MIME "words" within the header text, but
+        does no character set translation. If decoding of what looks
+        superficially like a MIME "word" fails, the raw string is returned. If
+        decoding produces a binary zero character, it is replaced by a question
+        mark - this is what Exim does for binary zeros that are actually
+        received in header lines.
+
+      o header tries to translate the string as decoded by bheader to a
+        standard character set. This is an attempt to produce the same string
+        as would be displayed on a user's MUA. If translation fails, the 
+        bheader string is returned. Translation is attempted only on operating
+        systems that support the iconv() function. This is indicated by the
+        compile-time macro HAVE_ICONV in a system Makefile or in Local/Makefile
+        .
+
+    In a filter file, the target character set for header can be specified by a
+    command of the following form:
+
+    headers charset "UTF-8"
+
+    This command affects all references to $h_ (or $header_) expansions in
+    subsequently obeyed filter commands. In the absence of this command, the
+    target character set in a filter is taken from the setting of the 
+    headers_charset option in the runtime configuration. The value of this
+    option defaults to the value of HEADERS_CHARSET in Local/Makefile. The
+    ultimate default is ISO-8859-1.
+
+    Header names follow the syntax of RFC 2822, which states that they may
+    contain any printing characters except space and colon. Consequently, curly
+    brackets do not terminate header names, and should not be used to enclose
+    them as if they were variables. Attempting to do so causes a syntax error.
+
+    Only header lines that are common to all copies of a message are visible to
+    this mechanism. These are the original header lines that are received with
+    the message, and any that are added by an ACL statement or by a system
+    filter. Header lines that are added to a particular copy of a message by a
+    router or transport are not accessible.
+
+    For incoming SMTP messages, no header lines are visible in ACLs that are
+    obeyed before the data phase completes, because the header structure is not
+    set up until the message is received. They are visible in DKIM, PRDR and
+    DATA ACLs. Header lines that are added in a RCPT ACL (for example) are
+    saved until the message's incoming header lines are available, at which
+    point they are added. When any of the above ACLs are running, however,
+    header lines added by earlier ACLs are visible.
+
+    Upper case and lower case letters are synonymous in header names. If the
+    following character is white space, the terminating colon may be omitted,
+    but this is not recommended, because you may then forget it when it is
+    needed. When white space terminates the header name, this white space is
+    included in the expanded string. If the message does not contain the given
+    header, the expansion item is replaced by an empty string. (See the def
+    condition in section 11.7 for a means of testing for the existence of a
+    header.)
+
+    If there is more than one header with the same name, they are all
+    concatenated to form the substitution string, up to a maximum length of
+    64K. Unless rheader is being used, leading and trailing white space is
+    removed from each header before concatenation, and a completely empty
+    header is ignored. A newline character is then inserted between non-empty
+    headers, but there is no newline at the very end. For the header and 
+    bheader expansion, for those headers that contain lists of addresses, a
+    comma is also inserted at the junctions between headers. This does not
+    happen for the rheader expansion.
+
+    When the headers are from an incoming message, the result of expanding any
+    of these variables is tainted.
+
+${hmac{<hashname>}{<secret>}{<string>}}
+
+    This function uses cryptographic hashing (either MD5 or SHA-1) to convert a
+    shared secret and some text into a message authentication code, as
+    specified in RFC 2104. This differs from "${md5:secret_text...}" or "$
+    {sha1:secret_text...}" in that the hmac step adds a signature to the
+    cryptographic hash, allowing for authentication that is not possible with
+    MD5 or SHA-1 alone. The hash name must expand to either "md5" or "sha1" at
+    present. For example:
+
+    ${hmac{md5}{somesecret}{$primary_hostname $tod_log}}
+
+    For the hostname mail.example.com and time 2002-10-17 11:30:59, this
+    produces:
+
+    dd97e3ba5d1a61b5006108f8c8252953
+
+    As an example of how this might be used, you might put in the main part of
+    an Exim configuration:
+
+    SPAMSCAN_SECRET=cohgheeLei2thahw
+
+    In a router or a transport you could then have:
+
+    headers_add = \
+      X-Spam-Scanned: ${primary_hostname} ${message_exim_id} \
+      ${hmac{md5}{SPAMSCAN_SECRET}\
+      {${primary_hostname},${message_exim_id},$h_message-id:}}
+
+    Then given a message, you can check where it was scanned by looking at the 
+    X-Spam-Scanned: header line. If you know the secret, you can check that
+    this header line is authentic by recomputing the authentication code from
+    the host name, message ID and the Message-id: header line. This can be done
+    using Exim's -be option, or by other means, for example, by using the 
+    hmac_md5_hex() function in Perl.
+
+${if <condition> {<string1>}{<string2>}}
+
+    If <condition> is true, <string1> is expanded and replaces the whole item;
+    otherwise <string2> is used. The available conditions are described in
+    section 11.7 below. For example:
+
+    ${if eq {$local_part}{postmaster} {yes}{no} }
+
+    The second string need not be present; if it is not and the condition is
+    not true, the item is replaced with nothing. Alternatively, the word "fail"
+    may be present instead of the second string (without any curly brackets).
+    In this case, the expansion is forced to fail if the condition is not true
+    (see section 11.4).
+
+    If both strings are omitted, the result is the string "true" if the
+    condition is true, and the empty string if the condition is false. This
+    makes it less cumbersome to write custom ACL and router conditions. For
+    example, instead of
+
+    condition = ${if >{$acl_m4}{3}{true}{false}}
+
+    you can use
+
+    condition = ${if >{$acl_m4}{3}}
+
+${imapfolder{<foldername>}}
+
+    This item converts a (possibly multilevel, or with non-ASCII characters)
+    folder specification to a Maildir name for filesystem use. For information
+    on internationalisation support see 60.2.
+
+${length{<string1>}{<string2>}}
+
+    The length item is used to extract the initial portion of a string. Both
+    strings are expanded, and the first one must yield a number, <n>, say. If
+    you are using a fixed value for the number, that is, if <string1> does not
+    change when expanded, you can use the simpler operator notation that avoids
+    some of the braces:
+
+    ${length_<n>:<string>}
+
+    The result of this item is either the first <n> bytes or the whole of <
+    string2>, whichever is the shorter. Do not confuse length with strlen,
+    which gives the length of a string. All measurement is done in bytes and is
+    not UTF-8 aware.
+
+${listextract{<number>}{<string1>}{<string2>}{<string3>}}
+
+    The <number> argument must consist entirely of decimal digits, apart from
+    an optional leading minus, and leading and trailing white space (which is
+    ignored).
+
+    After expansion, <string1> is interpreted as a list, colon-separated by
+    default, but the separator can be changed in the usual way (6.21).
+
+    The first field of the list is numbered one. If the number is negative, the
+    fields are counted from the end of the list, with the rightmost one
+    numbered -1. The numbered element of the list is extracted and placed in
+    $value, then <string2> is expanded as the result.
+
+    If the modulus of the number is zero or greater than the number of fields
+    in the string, the result is the expansion of <string3>.
+
+    For example:
+
+    ${listextract{2}{x:42:99}}
+
+    yields "42", and
+
+    ${listextract{-3}{<, x,42,99,& Mailer,,/bin/bash}{result: $value}}
+
+    yields "result: 42".
+
+    If {<string3>} is omitted, an empty string is used for string3. If {<
+    string2>} is also omitted, the value that was extracted is used. You can
+    use "fail" instead of {<string3>} as in a string extract.
+
+${listquote{<separator>}{<string>}}
+
+    This item doubles any occurrence of the separator character in the given
+    string. An empty string is replaced with a single space. This converts the
+    string into a safe form for use as a list element, in a list using the
+    given separator.
+
+${lookup {<key>} <search type> {<file>} {<string1>} {<string2>}}, ${lookup <
+search type> {<query>} {<string1>} {<string2>}}
+
+    The two forms of lookup item specify data lookups in files and databases,
+    as discussed in chapter 9. The first form is used for single-key lookups,
+    and the second is used for query-style lookups. The <key>, <file>, and <
+    query> strings are expanded before use.
+
+    If there is any white space in a lookup item which is part of a filter
+    command, a retry or rewrite rule, a routing rule for the manualroute
+    router, or any other place where white space is significant, the lookup
+    item must be enclosed in double quotes. The use of data lookups in users'
+    filter files may be locked out by the system administrator.
+
+    If the lookup succeeds, <string1> is expanded and replaces the entire item.
+    During its expansion, the variable $value contains the data returned by the
+    lookup. Afterwards it reverts to the value it had previously (at the outer
+    level it is empty). If the lookup fails, <string2> is expanded and replaces
+    the entire item. If {<string2>} is omitted, the replacement is the empty
+    string on failure. If <string2> is provided, it can itself be a nested
+    lookup, thus providing a mechanism for looking up a default value when the
+    original lookup fails.
+
+    If a nested lookup is used as part of <string1>, $value contains the data
+    for the outer lookup while the parameters of the second lookup are
+    expanded, and also while <string2> of the second lookup is expanded, should
+    the second lookup fail. Instead of {<string2>} the word "fail" can appear,
+    and in this case, if the lookup fails, the entire expansion is forced to
+    fail (see section 11.4). If both {<string1>} and {<string2>} are omitted,
+    the result is the looked up value in the case of a successful lookup, and
+    nothing in the case of failure.
+
+    For single-key lookups, the string "partial" is permitted to precede the
+    search type in order to do partial matching, and * or *@ may follow a
+    search type to request default lookups if the key does not match (see
+    sections 9.6 and 9.7 for details).
+
+    If a partial search is used, the variables $1 and $2 contain the wild and
+    non-wild parts of the key during the expansion of the replacement text.
+    They return to their previous values at the end of the lookup item.
+
+    This example looks up the postmaster alias in the conventional alias file:
+
+    ${lookup {postmaster} lsearch {/etc/aliases} {$value}}
+
+    This example uses NIS+ to look up the full name of the user corresponding
+    to the local part of an address, forcing the expansion to fail if it is not
+    found:
+
+    ${lookup nisplus {[name=$local_part],passwd.org_dir:gcos} \
+      {$value}fail}
+
+${map{<string1>}{<string2>}}
+
+    After expansion, <string1> is interpreted as a list, colon-separated by
+    default, but the separator can be changed in the usual way (6.21). For each
+    item in this list, its value is place in $item, and then <string2> is
+    expanded and added to the output as an item in a new list. The separator
+    used for the output list is the same as the one used for the input, but a
+    separator setting is not included in the output. For example:
+
+    ${map{a:b:c}{[$item]}} ${map{<- x-y-z}{($item)}}
+
+    expands to "[a]:[b]:[c] (x)-(y)-(z)". At the end of the expansion, the
+    value of $item is restored to what it was before. See also the filter and 
+    reduce expansion items.
+
+${nhash{<string1>}{<string2>}{<string3>}}
+
+    The three strings are expanded; the first two must yield numbers. Call them
+    <n> and <m>. If you are using fixed values for these numbers, that is, if <
+    string1> and <string2> do not change when they are expanded, you can use
+    the simpler operator notation that avoids some of the braces:
+
+    ${nhash_<n>_<m>:<string>}
+
+    The second number is optional (in both notations). If there is only one
+    number, the result is a number in the range 0-<n>-1. Otherwise, the string
+    is processed by a div/mod hash function that returns two numbers, separated
+    by a slash, in the ranges 0 to <n>-1 and 0 to <m>-1, respectively. For
+    example,
+
+    ${nhash{8}{64}{supercalifragilisticexpialidocious}}
+
+    returns the string "6/33".
+
+${perl{<subroutine>}{<arg>}{<arg>}...}
+
+    This item is available only if Exim has been built to include an embedded
+    Perl interpreter. The subroutine name and the arguments are first
+    separately expanded, and then the Perl subroutine is called with those
+    arguments. No additional arguments need be given; the maximum number
+    permitted, including the name of the subroutine, is nine.
+
+    The return value of the subroutine is inserted into the expanded string,
+    unless the return value is undef. In that case, the entire expansion is
+    forced to fail, in the same way as an explicit "fail" on a lookup item does
+    (see section 11.4). Whatever you return is evaluated in a scalar context,
+    thus the return value is a scalar. For example, if you return a Perl
+    vector, the return value is the size of the vector, not its contents.
+
+    If the subroutine exits by calling Perl's die function, the expansion fails
+    with the error message that was passed to die. More details of the embedded
+    Perl facility are given in chapter 12.
+
+    The redirect router has an option called forbid_filter_perl which locks out
+    the use of this expansion item in filter files.
+
+${prvs{<address>}{<secret>}{<keynumber>}}
+
+    The first argument is a complete email address and the second is secret
+    keystring. The third argument, specifying a key number, is optional. If
+    absent, it defaults to 0. The result of the expansion is a prvs-signed
+    email address, to be typically used with the return_path option on an smtp
+    transport as part of a bounce address tag validation (BATV) scheme. For
+    more discussion and an example, see section 44.53.
+
+${prvscheck{<address>}{<secret>}{<string>}}
+
+    This expansion item is the complement of the prvs item. It is used for
+    checking prvs-signed addresses. If the expansion of the first argument does
+    not yield a syntactically valid prvs-signed address, the whole item expands
+    to the empty string. When the first argument does expand to a syntactically
+    valid prvs-signed address, the second argument is expanded, with the
+    prvs-decoded version of the address and the key number extracted from the
+    address in the variables $prvscheck_address and $prvscheck_keynum,
+    respectively.
+
+    These two variables can be used in the expansion of the second argument to
+    retrieve the secret. The validity of the prvs-signed address is then
+    checked against the secret. The result is stored in the variable
+    $prvscheck_result, which is empty for failure or "1" for success.
+
+    The third argument is optional; if it is missing, it defaults to an empty
+    string. This argument is now expanded. If the result is an empty string,
+    the result of the expansion is the decoded version of the address. This is
+    the case whether or not the signature was valid. Otherwise, the result of
+    the expansion is the expansion of the third argument.
+
+    All three variables can be used in the expansion of the third argument.
+    However, once the expansion is complete, only $prvscheck_result remains
+    set. For more discussion and an example, see section 44.53.
+
+${readfile{<file name>}{<eol string>}}
+
+    The filename and end-of-line (eol) string are first expanded separately.
+    The file is then read, and its contents replace the entire item. All
+    newline characters in the file are replaced by the end-of-line string if it
+    is present. Otherwise, newlines are left in the string. String expansion is
+    not applied to the contents of the file. If you want this, you must wrap
+    the item in an expand operator. If the file cannot be read, the string
+    expansion fails.
+
+    The redirect router has an option called forbid_filter_readfile which locks
+    out the use of this expansion item in filter files.
+
+${readsocket{<name>}{<request>}{<options>}{<eol string>}{<fail string>}}
+
+    This item inserts data from a Unix domain or TCP socket into the expanded
+    string. The minimal way of using it uses just two arguments, as in these
+    examples:
+
+    ${readsocket{/socket/name}{request string}}
+    ${readsocket{inet:some.host:1234}{request string}}
+
+    For a Unix domain socket, the first substring must be the path to the
+    socket. For an Internet socket, the first substring must contain "inet:"
+    followed by a host name or IP address, followed by a colon and a port,
+    which can be a number or the name of a TCP port in /etc/services. An IP
+    address may optionally be enclosed in square brackets. This is best for
+    IPv6 addresses. For example:
+
+    ${readsocket{inet:[::1]:1234}{request string}}
+
+    Only a single host name may be given, but if looking it up yields more than
+    one IP address, they are each tried in turn until a connection is made. For
+    both kinds of socket, Exim makes a connection, writes the request string
+    (unless it is an empty string; no terminating NUL is ever sent) and reads
+    from the socket until an end-of-file is read. A timeout of 5 seconds is
+    applied. Additional, optional arguments extend what can be done. Firstly,
+    you can vary the timeout. For example:
+
+    ${readsocket{/socket/name}{request string}{3s}}
+
+    The third argument is a list of options, of which the first element is the
+    timeout and must be present if any options are given. Further elements are
+    options of form name=value. Example:
+
+    ${readsocket{/socket/name}{request string}{3s:shutdown=no}}
+
+    The following option names are recognised:
+
+      o cache Defines if the result data can be cached for use by a later
+        identical request in the same process. Values are "yes" or "no" (the
+        default). If not, all cached results for this connection specification
+        will be invalidated.
+
+      o shutdown Defines whether or not a write-shutdown is done on the
+        connection after sending the request. Values are "yes" (the default) or
+        "no" (preferred, eg. by some webservers).
+
+      o tls Controls the use of TLS on the connection. Values are "yes" or "no"
+        (the default). If it is enabled, a shutdown as described above is never
+        done.
+
+    A fourth argument allows you to change any newlines that are in the data
+    that is read, in the same way as for readfile (see above). This example
+    turns them into spaces:
+
+    ${readsocket{inet:127.0.0.1:3294}{request string}{3s}{ }}
+
+    As with all expansions, the substrings are expanded before the processing
+    happens. Errors in these sub-expansions cause the expansion to fail. In
+    addition, the following errors can occur:
+
+      o Failure to create a socket file descriptor;
+
+      o Failure to connect the socket;
+
+      o Failure to write the request string;
+
+      o Timeout on reading from the socket.
+
+    By default, any of these errors causes the expansion to fail. However, if
+    you supply a fifth substring, it is expanded and used when any of the above
+    errors occurs. For example:
+
+    ${readsocket{/socket/name}{request string}{3s}{\n}\
+      {socket failure}}
+
+    You can test for the existence of a Unix domain socket by wrapping this
+    expansion in "${if exists", but there is a race condition between that test
+    and the actual opening of the socket, so it is safer to use the fifth
+    argument if you want to be absolutely sure of avoiding an expansion error
+    for a non-existent Unix domain socket, or a failure to connect to an
+    Internet socket.
+
+    The redirect router has an option called forbid_filter_readsocket which
+    locks out the use of this expansion item in filter files.
+
+${reduce{<string1>}{<string2>}{<string3>}}
+
+    This operation reduces a list to a single, scalar string. After expansion,
+    <string1> is interpreted as a list, colon-separated by default, but the
+    separator can be changed in the usual way (6.21). Then <string2> is
+    expanded and assigned to the $value variable. After this, each item in the
+    <string1> list is assigned to $item, in turn, and <string3> is expanded for
+    each of them. The result of that expansion is assigned to $value before the
+    next iteration. When the end of the list is reached, the final value of
+    $value is added to the expansion output. The reduce expansion item can be
+    used in a number of ways. For example, to add up a list of numbers:
+
+    ${reduce {<, 1,2,3}{0}{${eval:$value+$item}}}
+
+    The result of that expansion would be "6". The maximum of a list of numbers
+    can be found:
+
+    ${reduce {3:0:9:4:6}{0}{${if >{$item}{$value}{$item}{$value}}}}
+
+    At the end of a reduce expansion, the values of $item and $value are
+    restored to what they were before. See also the filter and map expansion
+    items.
+
+$rheader_<header name>: or $rh_<header name>:
+
+    This item inserts "raw" header lines. It is described with the header
+    expansion item in section 11.5 above.
+
+${run <options> {<command arg list>}{<string1>}{<string2>}}
+
+    This item runs an external command, as a subprocess.
+
+    One option is supported after the word run, comma-separated.
+
+    If the option preexpand is not used, the command string is split into
+    individual arguments by spaces and then each argument is expanded. Then the
+    command is run in a separate process, but under the same uid and gid. As in
+    other command executions from Exim, a shell is not used by default. If the
+    command requires a shell, you must explicitly code it. The command name may
+    not be tainted, but the remaining arguments can be.
+
+    Note: if tainted arguments are used, they are supplied by a potential
+    attacker; a careful assessment for security vulnerabilities should be done.
+
+    If the option preexpand is used,
+
+    the command and its arguments are first expanded as one string. The result
+    is split apart into individual arguments by spaces, and then the command is
+    run as above. Since the arguments are split by spaces, when there is a
+    variable expansion which has an empty result, it will cause the situation
+    that the argument will simply be omitted when the program is actually
+    executed by Exim. If the script/program requires a specific number of
+    arguments and the expanded variable could possibly result in this empty
+    expansion, the variable must be quoted. This is more difficult if the
+    expanded variable itself could result in a string containing quotes,
+    because it would interfere with the quotes around the command arguments. A
+    possible guard against this is to wrap the variable in the sg operator to
+    change any quote marks to some other character.
+
+    Neither the command nor any argument may be tainted.
+
+    The standard input for the command exists, but is empty. The standard
+    output and standard error are set to the same file descriptor. If the
+    command succeeds (gives a zero return code) <string1> is expanded and
+    replaces the entire item; during this expansion, the standard output/error
+    from the command is in the variable $value. If the command fails, <string2
+    >, if present, is expanded and used. Once again, during the expansion, the
+    standard output/error from the command is in the variable $value.
+
+    If <string2> is absent, the result is empty. Alternatively, <string2> can
+    be the word "fail" (not in braces) to force expansion failure if the
+    command does not succeed. If both strings are omitted, the result is
+    contents of the standard output/error on success, and nothing on failure.
+
+    The standard output/error of the command is put in the variable $value. In
+    this ACL example, the output of a command is logged for the admin to
+    troubleshoot:
+
+    warn  condition    = ${run{/usr/bin/id}{yes}{no}}
+          log_message  = Output of id: $value
+
+    If the command requires shell idioms, such as the > redirect operator, the
+    shell must be invoked directly, such as with:
+
+    ${run{/bin/bash -c "/usr/bin/id >/tmp/id"}{yes}{yes}}
+
+    The return code from the command is put in the variable $runrc, and this
+    remains set afterwards, so in a filter file you can do things like this:
+
+    if "${run{x y z}{}}$runrc" is 1 then ...
+      elif $runrc is 2 then ...
+      ...
+    endif
+
+    If execution of the command fails (for example, the command does not
+    exist), the return code is 127 - the same code that shells use for
+    non-existent commands.
+
+    Warning: In a router or transport, you cannot assume the order in which
+    option values are expanded, except for those preconditions whose order of
+    testing is documented. Therefore, you cannot reliably expect to set $runrc
+    by the expansion of one option, and use it in another.
+
+    The redirect router has an option called forbid_filter_run which locks out
+    the use of this expansion item in filter files.
+
+${sg{<subject>}{<regex>}{<replacement>}}
+
+    This item works like Perl's substitution operator (s) with the global (/g)
+    option; hence its name. However, unlike the Perl equivalent, Exim does not
+    modify the subject string; instead it returns the modified string for
+    insertion into the overall expansion. The item takes three arguments: the
+    subject string, a regular expression, and a substitution string. For
+    example:
+
+    ${sg{abcdefabcdef}{abc}{xyz}}
+
+    yields "xyzdefxyzdef". Because all three arguments are expanded before use,
+    if any $, } or \ characters are required in the regular expression or in
+    the substitution string, they have to be escaped. For example:
+
+    ${sg{abcdef}{^(...)(...)\$}{\$2\$1}}
+
+    yields "defabc", and
+
+    ${sg{1=A 4=D 3=C}{\N(\d+)=\N}{K\$1=}}
+
+    yields "K1=A K4=D K3=C". Note the use of "\N" to protect the contents of
+    the regular expression from string expansion.
+
+    The regular expression is compiled in 8-bit mode, working against bytes
+    rather than any Unicode-aware character handling.
+
+${sort{<string>}{<comparator>}{<extractor>}}
+
+    After expansion, <string> is interpreted as a list, colon-separated by
+    default, but the separator can be changed in the usual way (6.21). The <
+    comparator> argument is interpreted as the operator of a two-argument
+    expansion condition. The numeric operators plus ge, gt, le, lt (and ~i
+    variants) are supported. The comparison should return true when applied to
+    two values if the first value should sort before the second value. The <
+    extractor> expansion is applied repeatedly to elements of the list, the
+    element being placed in $item, to give values for comparison.
+
+    The item result is a sorted list, with the original list separator, of the
+    list elements (in full) of the original.
+
+    Examples:
+
+    ${sort{3:2:1:4}{<}{$item}}
+
+    sorts a list of numbers, and
+
+    ${sort {${lookup dnsdb{>:,,mx=example.com}}} {<} {${listextract{1}{<,$item}}}}
+
+    will sort an MX lookup into priority order.
+
+${srs_encode {<secret>}{<return path>}{<original domain>}}
+
+    SRS encoding. See SECT 58.5 for details.
+
+${substr{<start>}{<len>}{<subject>}}
+
+    The three strings are expanded; the first two must yield numbers. Call them
+    <n> and <m>. If you are using fixed values for these numbers, that is, if <
+    start> and <len> do not change when they are expanded, you can use the
+    simpler operator notation that avoids some of the braces:
+
+    ${substr_<n>_<m>:<subject>}
+
+    The second number is optional (in both notations). If it is absent in the
+    simpler format, the preceding underscore must also be omitted.
+
+    The substr item can be used to extract more general substrings than length.
+    The first number, <n>, is a starting offset, and <m> is the length
+    required. For example
+
+    ${substr{3}{2}{$local_part}}
+
+    If the starting offset is greater than the string length the result is the
+    null string; if the length plus starting offset is greater than the string
+    length, the result is the right-hand part of the string, starting from the
+    given offset. The first byte (character) in the string has offset zero.
+
+    The substr expansion item can take negative offset values to count from the
+    right-hand end of its operand. The last byte (character) is offset -1, the
+    second-last is offset -2, and so on. Thus, for example,
+
+    ${substr{-5}{2}{1234567}}
+
+    yields "34". If the absolute value of a negative offset is greater than the
+    length of the string, the substring starts at the beginning of the string,
+    and the length is reduced by the amount of overshoot. Thus, for example,
+
+    ${substr{-5}{2}{12}}
+
+    yields an empty string, but
+
+    ${substr{-3}{2}{12}}
+
+    yields "1".
+
+    When the second number is omitted from substr, the remainder of the string
+    is taken if the offset is positive. If it is negative, all bytes
+    (characters) in the string preceding the offset point are taken. For
+    example, an offset of -1 and no length, as in these semantically identical
+    examples:
+
+    ${substr_-1:abcde}
+    ${substr{-1}{abcde}}
+
+    yields all but the last character of the string, that is, "abcd".
+
+    All measurement is done in bytes and is not UTF-8 aware.
+
+${tr{<subject>}{<characters>}{<replacements>}}
+
+    This item does single-character (in bytes) translation on its subject
+    string. The second argument is a list of characters to be translated in the
+    subject string. Each matching character is replaced by the corresponding
+    character from the replacement list. For example
+
+    ${tr{abcdea}{ac}{13}}
+
+    yields "1b3de1". If there are duplicates in the second character string,
+    the last occurrence is used. If the third string is shorter than the
+    second, its last character is replicated. However, if it is empty, no
+    translation takes place.
+
+    All character handling is done in bytes and is not UTF-8 aware.
+
+
+11.6 Expansion operators
+------------------------
+
+For expansion items that perform transformations on a single argument string,
+the "operator" notation is used because it is simpler and uses fewer braces.
+The substring is first expanded before the operation is applied to it. The
+following operations can be performed:
+
+${address:<string>}
+
+    The string is interpreted as an RFC 2822 address, as it might appear in a
+    header line, and the effective address is extracted from it. If the string
+    does not parse successfully, the result is empty.
+
+    The parsing correctly handles SMTPUTF8 Unicode in the string.
+
+${addresses:<string>}
+
+    The string (after expansion) is interpreted as a list of addresses in RFC
+    2822 format, such as can be found in a To: or Cc: header line. The
+    operative address (local-part@domain) is extracted from each item, and the
+    result of the expansion is a colon-separated list, with appropriate
+    doubling of colons should any happen to be present in the email addresses.
+    Syntactically invalid RFC2822 address items are omitted from the output.
+
+    It is possible to specify a character other than colon for the output
+    separator by starting the string with > followed by the new separator
+    character. For example:
+
+    ${addresses:>& Chief <ceo@up.stairs>, sec@base.ment (dogsbody)}
+
+    expands to "ceo@up.stairs&sec@base.ment". The string is expanded first, so
+    if the expanded string starts with >, it may change the output separator
+    unintentionally. This can be avoided by setting the output separator
+    explicitly:
+
+    ${addresses:>:$h_from:}
+
+    Compare the address (singular) expansion item, which extracts the working
+    address from a single RFC2822 address. See the filter, map, and reduce
+    items for ways of processing lists.
+
+    To clarify "list of addresses in RFC 2822 format" mentioned above, Exim
+    follows a strict interpretation of header line formatting. Exim parses the
+    bare, unquoted portion of an email address and if it finds a comma, treats
+    it as an email address separator. For the example header line:
+
+    From: =?iso-8859-2?Q?Last=2C_First?= <user@example.com>
+
+    The first example below demonstrates that Q-encoded email addresses are
+    parsed properly if it is given the raw header (in this example,
+    "$rheader_from:"). It does not see the comma because it's still encoded as
+    "=2C". The second example below is passed the contents of "$header_from:",
+    meaning it gets de-mimed. Exim sees the decoded "," so it treats it as two
+    email addresses. The third example shows that the presence of a comma is
+    skipped when it is quoted. The fourth example shows SMTPUTF8 handling.
+
+    # exim -be '${addresses:From: \
+    =?iso-8859-2?Q?Last=2C_First?= <user@example.com>}'
+    user@example.com
+    # exim -be '${addresses:From: Last, First <user@example.com>}'
+    Last:user@example.com
+    # exim -be '${addresses:From: "Last, First" <user@example.com>}'
+    user@example.com
+    # exim -be '${addresses:?????? <??????????@example.jp>}'
+    ??????????@example.jp
+
+${base32:<digits>}
+
+    The string must consist entirely of decimal digits. The number is converted
+    to base 32 and output as a (empty, for zero) string of characters. Only
+    lowercase letters are used.
+
+${base32d:<base-32 digits>}
+
+    The string must consist entirely of base-32 digits. The number is converted
+    to decimal and output as a string.
+
+${base62:<digits>}
+
+    The string must consist entirely of decimal digits. The number is converted
+    to base 62 and output as a string of six characters, including leading
+    zeros. In the few operating environments where Exim uses base 36 instead of
+    base 62 for its message identifiers (because those systems do not have
+    case-sensitive filenames), base 36 is used by this operator, despite its
+    name. Note: Just to be absolutely clear: this is not base64 encoding.
+
+${base62d:<base-62 digits>}
+
+    The string must consist entirely of base-62 digits, or, in operating
+    environments where Exim uses base 36 instead of base 62 for its message
+    identifiers, base-36 digits. The number is converted to decimal and output
+    as a string.
+
+${base64:<string>}
+
+    This operator converts a string into one that is base64 encoded.
+
+    If the string is a single variable of type certificate, returns the base64
+    encoding of the DER form of the certificate.
+
+${base64d:<string>}
+
+    This operator converts a base64-encoded string into the un-coded form.
+
+${domain:<string>}
+
+    The string is interpreted as an RFC 2822 address and the domain is
+    extracted from it. If the string does not parse successfully, the result is
+    empty.
+
+${escape:<string>}
+
+    If the string contains any non-printing characters, they are converted to
+    escape sequences starting with a backslash. Whether characters with the
+    most significant bit set (so-called "8-bit characters") count as printing
+    or not is controlled by the print_topbitchars option.
+
+${escape8bit:<string>}
+
+    If the string contains any characters with the most significant bit set,
+    they are converted to escape sequences starting with a backslash.
+    Backslashes and DEL characters are also converted.
+
+${eval:<string>} and ${eval10:<string>}
+
+    These items supports simple arithmetic and bitwise logical operations in
+    expansion strings. The string (after expansion) must be a conventional
+    arithmetic expression, but it is limited to basic arithmetic operators,
+    bitwise logical operators, and parentheses. All operations are carried out
+    using integer arithmetic. The operator priorities are as follows (the same
+    as in the C programming language):
+
+        highest: not (~), negate (-)
+                 multiply (*), divide (/), remainder (%)
+                 plus (+), minus (-)
+                 shift-left (<<), shift-right (>>)
+                 and (&)
+                 xor (^)
+        lowest:  or (|)
+
+    Binary operators with the same priority are evaluated from left to right.
+    White space is permitted before or after operators.
+
+    For eval, numbers may be decimal, octal (starting with "0") or hexadecimal
+    (starting with "0x"). For eval10, all numbers are taken as decimal, even if
+    they start with a leading zero; hexadecimal numbers are not permitted. This
+    can be useful when processing numbers extracted from dates or times, which
+    often do have leading zeros.
+
+    A number may be followed by "K", "M" or "G" to multiply it by 1024,
+    1024*1024 or 1024*1024*1024, respectively. Negative numbers are supported.
+    The result of the computation is a decimal representation of the answer
+    (without "K", "M" or "G"). For example:
+
+    ${eval:1+1}              yields 2
+    ${eval:1+2*3}            yields 7
+    ${eval:(1+2)*3}          yields 9
+    ${eval:2+42%5}           yields 4
+    ${eval:0xc&5}            yields 4
+    ${eval:0xc|5}            yields 13
+    ${eval:0xc^5}            yields 9
+    ${eval:0xc>>1}           yields 6
+    ${eval:0xc<<1}           yields 24
+    ${eval:~255&0x1234}      yields 4608
+    ${eval:-(~255&0x1234)}   yields -4608
+
+    As a more realistic example, in an ACL you might have
+
+    deny   condition =                    \
+             ${if and {                   \
+               {>{$rcpt_count}{10}}       \
+               {                          \
+               <                          \
+                 {$recipients_count}      \
+                 {${eval:$rcpt_count/2}}  \
+               }                          \
+             }{yes}{no}}
+           message = Too many bad recipients
+
+    The condition is true if there have been more than 10 RCPT commands and
+    fewer than half of them have resulted in a valid recipient.
+
+${expand:<string>}
+
+    The expand operator causes a string to be expanded for a second time. For
+    example,
+
+    ${expand:${lookup{$domain}dbm{/some/file}{$value}}}
+
+    first looks up a string in a file while expanding the operand for expand,
+    and then re-expands what it has found.
+
+${from_utf8:<string>}
+
+    The world is slowly moving towards Unicode, although there are no standards
+    for email yet. However, other applications (including some databases) are
+    starting to store data in Unicode, using UTF-8 encoding. This operator
+    converts from a UTF-8 string to an ISO-8859-1 string. UTF-8 code values
+    greater than 255 are converted to underscores. The input must be a valid
+    UTF-8 string. If it is not, the result is an undefined sequence of bytes.
+
+    Unicode code points with values less than 256 are compatible with ASCII and
+    ISO-8859-1 (also known as Latin-1). For example, character 169 is the
+    copyright symbol in both cases, though the way it is encoded is different.
+    In UTF-8, more than one byte is needed for characters with code values
+    greater than 127, whereas ISO-8859-1 is a single-byte encoding (but thereby
+    limited to 256 characters). This makes translation from UTF-8 to ISO-8859-1
+    straightforward.
+
+${hash_<n>_<m>:<string>}
+
+    The hash operator is a simpler interface to the hashing function that can
+    be used when the two parameters are fixed numbers (as opposed to strings
+    that change when expanded). The effect is the same as
+
+    ${hash{<n>}{<m>}{<string>}}
+
+    See the description of the general hash item above for details. The
+    abbreviation h can be used when hash is used as an operator.
+
+${hex2b64:<hexstring>}
+
+    This operator converts a hex string into one that is base64 encoded. This
+    can be useful for processing the output of the various hashing functions.
+
+${hexquote:<string>}
+
+    This operator converts non-printable characters in a string into a hex
+    escape form. Byte values between 33 (!) and 126 (~) inclusive are left as
+    is, and other byte values are converted to "\xNN", for example, a byte
+    value 127 is converted to "\x7f".
+
+${ipv6denorm:<string>}
+
+    This expands an IPv6 address to a full eight-element colon-separated set of
+    hex digits including leading zeroes. A trailing ipv4-style dotted-decimal
+    set is converted to hex. Pure IPv4 addresses are converted to IPv4-mapped
+    IPv6.
+
+${ipv6norm:<string>}
+
+    This converts an IPv6 address to canonical form. Leading zeroes of groups
+    are omitted, and the longest set of zero-valued groups is replaced with a
+    double colon. A trailing ipv4-style dotted-decimal set is converted to hex.
+    Pure IPv4 addresses are converted to IPv4-mapped IPv6.
+
+${lc:<string>}
+
+    This forces the letters in the string into lower-case, for example:
+
+    ${lc:$local_part}
+
+    Case is defined per the system C locale.
+
+${length_<number>:<string>}
+
+    The length operator is a simpler interface to the length function that can
+    be used when the parameter is a fixed number (as opposed to a string that
+    changes when expanded). The effect is the same as
+
+    ${length{<number>}{<string>}}
+
+    See the description of the general length item above for details. Note that
+    length is not the same as strlen. The abbreviation l can be used when 
+    length is used as an operator. All measurement is done in bytes and is not
+    UTF-8 aware.
+
+${listcount:<string>}
+
+    The string is interpreted as a list and the number of items is returned.
+
+${listnamed:<name>} and ${listnamed_<type>:<name>}
+
+    The name is interpreted as a named list and the content of the list is
+    returned, expanding any referenced lists, re-quoting as needed for
+    colon-separation. If the optional type is given it must be one of "a", "d",
+    "h" or "l" and selects address-, domain-, host- or localpart- lists to
+    search among respectively. Otherwise all types are searched in an undefined
+    order and the first matching list is returned. Note: Neither
+    string-expansion of lists referenced by named-list syntax elements, nor
+    expansion of lookup elements, is done by the listnamed operator.
+
+${local_part:<string>}
+
+    The string is interpreted as an RFC 2822 address and the local part is
+    extracted from it. If the string does not parse successfully, the result is
+    empty. The parsing correctly handles SMTPUTF8 Unicode in the string.
+
+${mask:<IP address>/<bit count>}, ${mask_n:<IP address>/<bit count>}
+
+    If the form of the string to be operated on is not an IP address followed
+    by a slash and an integer (that is, a network address in CIDR notation),
+    the expansion fails. Otherwise, this operator converts the IP address to
+    binary, masks off the least significant bits according to the bit count,
+    and converts the result back to text, with mask appended. For example,
+
+    ${mask:10.111.131.206/28}
+
+    returns the string "10.111.131.192/28".
+
+    Since this operation is expected to be mostly used for looking up masked
+    addresses in files, the
+
+    normal
+
+    result for an IPv6 address uses dots to separate components instead of
+    colons, because colon terminates a key string in lsearch files. So, for
+    example,
+
+    ${mask:3ffe:ffff:836f:0a00:000a:0800:200a:c031/99}
+
+    returns the string
+
+    3ffe.ffff.836f.0a00.000a.0800.2000.0000/99
+
+    If the optional form mask_n is used, IPv6 address result are instead
+    returned in normailsed form, using colons and with zero-compression.
+
+    Letters in IPv6 addresses are always output in lower case.
+
+${md5:<string>}
+
+    The md5 operator computes the MD5 hash value of the string, and returns it
+    as a 32-digit hexadecimal number, in which any letters are in lower case.
+
+    If the string is a single variable of type certificate, returns the MD5
+    hash fingerprint of the certificate.
+
+${nhash_<n>_<m>:<string>}
+
+    The nhash operator is a simpler interface to the numeric hashing function
+    that can be used when the two parameters are fixed numbers (as opposed to
+    strings that change when expanded). The effect is the same as
+
+    ${nhash{<n>}{<m>}{<string>}}
+
+    See the description of the general nhash item above for details.
+
+${quote:<string>}
+
+    The quote operator puts its argument into double quotes if it is an empty
+    string or contains anything other than letters, digits, underscores, dots,
+    and hyphens. Any occurrences of double quotes and backslashes are escaped
+    with a backslash. Newlines and carriage returns are converted to "\n" and "
+    \r", respectively For example,
+
+    ${quote:ab"*"cd}
+
+    becomes
+
+    "ab\"*\"cd"
+
+    The place where this is useful is when the argument is a substitution from
+    a variable or a message header.
+
+${quote_local_part:<string>}
+
+    This operator is like quote, except that it quotes the string only if
+    required to do so by the rules of RFC 2822 for quoting local parts. For
+    example, a plus sign would not cause quoting (but it would for quote). If
+    you are creating a new email address from the contents of $local_part (or
+    any other unknown data), you should always use this operator.
+
+    This quoting determination is not SMTPUTF8-aware, thus quoting non-ASCII
+    data will likely use the quoting form. Thus ${quote_local_part:??????} will
+    always become "??????".
+
+${quote_<lookup-type>:<string>}
+
+    This operator applies lookup-specific quoting rules to the string. Each
+    query-style lookup type has its own quoting rules which are described with
+    the lookups in chapter 9. For example,
+
+    ${quote_ldap:two * two}
+
+    returns
+
+    two%20%5C2A%20two
+
+    For single-key lookup types, no quoting is ever necessary and this operator
+    yields an unchanged string.
+
+${randint:<n>}
+
+    This operator returns a somewhat random number which is less than the
+    supplied number and is at least 0. The quality of this randomness depends
+    on how Exim was built; the values are not suitable for keying material. If
+    Exim is linked against OpenSSL then RAND_pseudo_bytes() is used. If Exim is
+    linked against GnuTLS then gnutls_rnd(GNUTLS_RND_NONCE) is used, for
+    versions of GnuTLS with that function. Otherwise, the implementation may be
+    arc4random(), random() seeded by srandomdev() or srandom(), or a custom
+    implementation even weaker than random().
+
+${reverse_ip:<ipaddr>}
+
+    This operator reverses an IP address; for IPv4 addresses, the result is in
+    dotted-quad decimal form, while for IPv6 addresses the result is in
+    dotted-nibble hexadecimal form. In both cases, this is the "natural" form
+    for DNS. For example,
+
+    ${reverse_ip:192.0.2.4}
+    ${reverse_ip:2001:0db8:c42:9:1:abcd:192.0.2.127}
+
+    returns
+
+    4.2.0.192
+    f.7.2.0.0.0.0.c.d.c.b.a.1.0.0.0.9.0.0.0.2.4.c.0.8.b.d.0.1.0.0.2
+
+${rfc2047:<string>}
+
+    This operator encodes text according to the rules of RFC 2047. This is an
+    encoding that is used in header lines to encode non-ASCII characters. It is
+    assumed that the input string is in the encoding specified by the 
+    headers_charset option, which gets its default at build time. If the string
+    contains only characters in the range 33-126, and no instances of the
+    characters
+
+    ? = ( ) < > @ , ; : \ " . [ ] _
+
+    it is not modified. Otherwise, the result is the RFC 2047 encoding of the
+    string, using as many "encoded words" as necessary to encode all the
+    characters.
+
+${rfc2047d:<string>}
+
+    This operator decodes strings that are encoded as per RFC 2047. Binary zero
+    bytes are replaced by question marks. Characters are converted into the
+    character set defined by headers_charset. Overlong RFC 2047 "words" are not
+    recognized unless check_rfc2047_length is set false.
+
+    Note: If you use $header_xxx: (or $h_xxx:) to access a header line, RFC
+    2047 decoding is done automatically. You do not need to use this operator
+    as well.
+
+${rxquote:<string>}
+
+    The rxquote operator inserts a backslash before any non-alphanumeric
+    characters in its argument. This is useful when substituting the values of
+    variables or headers inside regular expressions.
+
+${sha1:<string>}
+
+    The sha1 operator computes the SHA-1 hash value of the string, and returns
+    it as a 40-digit hexadecimal number, in which any letters are in upper
+    case.
+
+    If the string is a single variable of type certificate, returns the SHA-1
+    hash fingerprint of the certificate.
+
+${sha256:<string>}, ${sha2:<string>}, ${sha2_<n>:<string>}
+
+    The sha256 operator computes the SHA-256 hash value of the string and
+    returns it as a 64-digit hexadecimal number, in which any letters are in
+    upper case.
+
+    If the string is a single variable of type certificate, returns the SHA-256
+    hash fingerprint of the certificate.
+
+    The operator can also be spelled sha2 and does the same as sha256 (except
+    for certificates, which are not supported). Finally, if an underbar and a
+    number is appended it specifies the output length, selecting a member of
+    the SHA-2 family of hash functions. Values of 256, 384 and 512 are
+    accepted, with 256 being the default.
+
+${sha3:<string>}, ${sha3_<n>:<string>}
+
+    The sha3 operator computes the SHA3-256 hash value of the string and
+    returns it as a 64-digit hexadecimal number, in which any letters are in
+    upper case.
+
+    If a number is appended, separated by an underbar, it specifies the output
+    length. Values of 224, 256, 384 and 512 are accepted; with 256 being the
+    default.
+
+    The sha3 expansion item is only supported if Exim has been compiled with
+    GnuTLS 3.5.0 or later, or OpenSSL 1.1.1 or later. The macro
+    "_CRYPTO_HASH_SHA3" will be defined if it is supported.
+
+${stat:<string>}
+
+    The string, after expansion, must be a file path. A call to the stat()
+    function is made for this path. If stat() fails, an error occurs and the
+    expansion fails. If it succeeds, the data from the stat replaces the item,
+    as a series of <name>=<value> pairs, where the values are all numerical,
+    except for the value of "smode". The names are: "mode" (giving the mode as
+    a 4-digit octal number), "smode" (giving the mode in symbolic format as a
+    10-character string, as for the ls command), "inode", "device", "links",
+    "uid", "gid", "size", "atime", "mtime", and "ctime". You can extract
+    individual fields using the extract expansion item.
+
+    The use of the stat expansion in users' filter files can be locked out by
+    the system administrator. Warning: The file size may be incorrect on 32-bit
+    systems for files larger than 2GB.
+
+${str2b64:<string>}
+
+    Now deprecated, a synonym for the base64 expansion operator.
+
+${strlen:<string>}
+
+    The item is replaced by the length of the expanded string, expressed as a
+    decimal number. Note: Do not confuse strlen with length. All measurement is
+    done in bytes and is not UTF-8 aware.
+
+${substr_<start>_<length>:<string>}
+
+    The substr operator is a simpler interface to the substr function that can
+    be used when the two parameters are fixed numbers (as opposed to strings
+    that change when expanded). The effect is the same as
+
+    ${substr{<start>}{<length>}{<string>}}
+
+    See the description of the general substr item above for details. The
+    abbreviation s can be used when substr is used as an operator. All
+    measurement is done in bytes and is not UTF-8 aware.
+
+${time_eval:<string>}
+
+    This item converts an Exim time interval such as "2d4h5m" into a number of
+    seconds.
+
+${time_interval:<string>}
+
+    The argument (after sub-expansion) must be a sequence of decimal digits
+    that represents an interval of time as a number of seconds. It is converted
+    into a number of larger units and output in Exim's normal time format, for
+    example, "1w3d4h2m6s".
+
+${uc:<string>}
+
+    This forces the letters in the string into upper-case. Case is defined per
+    the system C locale.
+
+${utf8clean:<string>}
+
+    This replaces any invalid utf-8 sequence in the string by the character "?
+    ". In versions of Exim before 4.92, this did not correctly do so for a
+    truncated final codepoint's encoding, and the character would be silently
+    dropped. If you must handle detection of this scenario across both sets of
+    Exim behavior, the complexity will depend upon the task. For instance, to
+    detect if the first character is multibyte and a 1-byte extraction can be
+    successfully used as a path component (as is common for dividing up
+    delivery folders), you might use:
+
+    condition = ${if inlist{${utf8clean:${length_1:$local_part}}}{:?}{yes}{no}}
+
+    (which will false-positive if the first character of the local part is a
+    literal question mark).
+
+${utf8_domain_to_alabel:<string>}, ${utf8_domain_from_alabel:<string>}, $
+{utf8_localpart_to_alabel:<string>}, ${utf8_localpart_from_alabel:<string>}
+
+    These convert EAI mail name components between UTF-8 and a-label forms. For
+    information on internationalisation support see 60.1.
+
+
+11.7 Expansion conditions
+-------------------------
+
+The following conditions are available for testing by the ${if construct while
+expanding strings:
+
+!<condition>
+
+    Preceding any condition with an exclamation mark negates the result of the
+    condition.
+
+<symbolic operator> {<string1>}{<string2>}
+
+    There are a number of symbolic operators for doing numeric comparisons.
+    They are:
+
+        =  equal
+        == equal
+        >  greater
+        >= greater or equal
+        <  less
+        <= less or equal
+
+    For example:
+
+    ${if >{$message_size}{10M} ...
+
+    Note that the general negation operator provides for inequality testing.
+    The two strings must take the form of optionally signed decimal integers,
+    optionally followed by one of the letters "K", "M" or "G" (in either upper
+    or lower case), signifying multiplication by 1024, 1024*1024 or
+    1024*1024*1024, respectively. As a special case, the numerical value of an
+    empty string is taken as zero.
+
+    In all cases, a relative comparator OP is testing if <string1> OP <string2
+    >; the above example is checking if $message_size is larger than 10M, not
+    if 10M is larger than $message_size.
+
+acl {{<name>}{<arg1>}{<arg2>}...}
+
+    The name and zero to nine argument strings are first expanded separately.
+    The expanded arguments are assigned to the variables $acl_arg1 to $acl_arg9
+    in order. Any unused are made empty. The variable $acl_narg is set to the
+    number of arguments. The named ACL (see chapter 44) is called and may use
+    the variables; if another acl expansion is used the values are restored
+    after it returns. If the ACL sets a value using a "message =" modifier the
+    variable $value becomes the result of the expansion, otherwise it is empty.
+    If the ACL returns accept the condition is true; if deny, false. If the ACL
+    returns defer the result is a forced-fail.
+
+bool {<string>}
+
+    This condition turns a string holding a true or false representation into a
+    boolean state. It parses "true", "false", "yes" and "no"
+    (case-insensitively); also integer numbers map to true if non-zero, false
+    if zero. An empty string is treated as false. Leading and trailing
+    whitespace is ignored; thus a string consisting only of whitespace is
+    false. All other string values will result in expansion failure.
+
+    When combined with ACL variables, this expansion condition will let you
+    make decisions in one place and act on those decisions in another place.
+    For example:
+
+    ${if bool{$acl_m_privileged_sender} ...
+
+bool_lax {<string>}
+
+    Like bool, this condition turns a string into a boolean state. But where 
+    bool accepts a strict set of strings, bool_lax uses the same loose
+    definition that the Router condition option uses. The empty string and the
+    values "false", "no" and "0" map to false, all others map to true. Leading
+    and trailing whitespace is ignored.
+
+    Note that where "bool{00}" is false, "bool_lax{00}" is true.
+
+crypteq {<string1>}{<string2>}
+
+    This condition is included in the Exim binary if it is built to support any
+    authentication mechanisms (see chapter 33). Otherwise, it is necessary to
+    define SUPPORT_CRYPTEQ in Local/Makefile to get crypteq included in the
+    binary.
+
+    The crypteq condition has two arguments. The first is encrypted and
+    compared against the second, which is already encrypted. The second string
+    may be in the LDAP form for storing encrypted strings, which starts with
+    the encryption type in curly brackets, followed by the data. If the second
+    string does not begin with "{" it is assumed to be encrypted with crypt()
+    or crypt16() (see below), since such strings cannot begin with "{".
+    Typically this will be a field from a password file. An example of an
+    encrypted string in LDAP form is:
+
+    {md5}CY9rzUYh03PK3k6DJie09g==
+
+    If such a string appears directly in an expansion, the curly brackets have
+    to be quoted, because they are part of the expansion syntax. For example:
+
+    ${if crypteq {test}{\{md5\}CY9rzUYh03PK3k6DJie09g==}{yes}{no}}
+
+    The following encryption types (whose names are matched case-independently)
+    are supported:
+
+      o {md5} computes the MD5 digest of the first string, and expresses this
+        as printable characters to compare with the remainder of the second
+        string. If the length of the comparison string is 24, Exim assumes that
+        it is base64 encoded (as in the above example). If the length is 32,
+        Exim assumes that it is a hexadecimal encoding of the MD5 digest. If
+        the length not 24 or 32, the comparison fails.
+
+      o {sha1} computes the SHA-1 digest of the first string, and expresses
+        this as printable characters to compare with the remainder of the
+        second string. If the length of the comparison string is 28, Exim
+        assumes that it is base64 encoded. If the length is 40, Exim assumes
+        that it is a hexadecimal encoding of the SHA-1 digest. If the length is
+        not 28 or 40, the comparison fails.
+
+      o {crypt} calls the crypt() function, which traditionally used to use
+        only the first eight characters of the password. However, in modern
+        operating systems this is no longer true, and in many cases the entire
+        password is used, whatever its length.
+
+      o {crypt16} calls the crypt16() function, which was originally created to
+        use up to 16 characters of the password in some operating systems.
+        Again, in modern operating systems, more characters may be used.
+
+    Exim has its own version of crypt16(), which is just a double call to crypt
+    (). For operating systems that have their own version, setting HAVE_CRYPT16
+    in Local/Makefile when building Exim causes it to use the operating system
+    version instead of its own. This option is set by default in the
+    OS-dependent Makefile for those operating systems that are known to support
+    crypt16().
+
+    Some years after Exim's crypt16() was implemented, a user discovered that
+    it was not using the same algorithm as some operating systems' versions. It
+    turns out that as well as crypt16() there is a function called bigcrypt()
+    in some operating systems. This may or may not use the same algorithm, and
+    both of them may be different to Exim's built-in crypt16().
+
+    However, since there is now a move away from the traditional crypt()
+    functions towards using SHA1 and other algorithms, tidying up this area of
+    Exim is seen as very low priority.
+
+    If you do not put a encryption type (in curly brackets) in a crypteq
+    comparison, the default is usually either "{crypt}" or "{crypt16}", as
+    determined by the setting of DEFAULT_CRYPT in Local/Makefile. The default
+    default is "{crypt}". Whatever the default, you can always use either
+    function by specifying it explicitly in curly brackets.
+
+def:<variable name>
+
+    The def condition must be followed by the name of one of the expansion
+    variables defined in section 11.9. The condition is true if the variable
+    does not contain the empty string. For example:
+
+    ${if def:sender_ident {from $sender_ident}}
+
+    Note that the variable name is given without a leading $ character. If the
+    variable does not exist, the expansion fails.
+
+def:header_<header name>:  or  def:h_<header name>:
+
+    This condition is true if a message is being processed and the named header
+    exists in the message. For example,
+
+    ${if def:header_reply-to:{$h_reply-to:}{$h_from:}}
+
+    Note: No $ appears before header_ or h_ in the condition, and the header
+    name must be terminated by a colon if white space does not follow.
+
+eq {<string1>}{<string2>}, eqi {<string1>}{<string2>}
+
+    The two substrings are first expanded. The condition is true if the two
+    resulting strings are identical. For eq the comparison includes the case of
+    letters, whereas for eqi the comparison is case-independent, where case is
+    defined per the system C locale.
+
+exists {<file name>}
+
+    The substring is first expanded and then interpreted as an absolute path.
+    The condition is true if the named file (or directory) exists. The
+    existence test is done by calling the stat() function. The use of the 
+    exists test in users' filter files may be locked out by the system
+    administrator.
+
+    Note: Testing a path using this condition is not a sufficient way of
+    de-tainting it. Consider using a dsearch lookup.
+
+first_delivery
+
+    This condition, which has no data, is true during a message's first
+    delivery attempt. It is false during any subsequent delivery attempts.
+
+forall{<a list>}{<a condition>}, forany{<a list>}{<a condition>}
+
+    These conditions iterate over a list. The first argument is expanded to
+    form the list. By default, the list separator is a colon, but it can be
+    changed by the normal method (6.21). The second argument is interpreted as
+    a condition that is to be applied to each item in the list in turn. During
+    the interpretation of the condition, the current list item is placed in a
+    variable called $item.
+
+      o For forany, interpretation stops if the condition is true for any item,
+        and the result of the whole condition is true. If the condition is
+        false for all items in the list, the overall condition is false.
+
+      o For forall, interpretation stops if the condition is false for any
+        item, and the result of the whole condition is false. If the condition
+        is true for all items in the list, the overall condition is true.
+
+    Note that negation of forany means that the condition must be false for all
+    items for the overall condition to succeed, and negation of forall means
+    that the condition must be false for at least one item. In this example,
+    the list separator is changed to a comma:
+
+    ${if forany{<, $recipients}{match{$item}{^user3@}}{yes}{no}}
+
+    The value of $item is saved and restored while forany or forall is being
+    processed, to enable these expansion items to be nested.
+
+    To scan a named list, expand it with the listnamed operator.
+
+forall_json{<a JSON array>}{<a condition>}, forany_json{<a JSON array>}{<a
+condition>}, forall_jsons{<a JSON array>}{<a condition>}, forany_jsons{<a JSON
+array>}{<a condition>}
+
+    As for the above, except that the first argument must, after expansion, be
+    a JSON array. The array separator is not changeable. For the "jsons"
+    variants the elements are expected to be JSON strings and have their quotes
+    removed before the evaluation of the condition.
+
+ge {<string1>}{<string2>}, gei {<string1>}{<string2>}
+
+    The two substrings are first expanded. The condition is true if the first
+    string is lexically greater than or equal to the second string. For ge the
+    comparison includes the case of letters, whereas for gei the comparison is
+    case-independent. Case and collation order are defined per the system C
+    locale.
+
+gt {<string1>}{<string2>}, gti {<string1>}{<string2>}
+
+    The two substrings are first expanded. The condition is true if the first
+    string is lexically greater than the second string. For gt the comparison
+    includes the case of letters, whereas for gti the comparison is
+    case-independent. Case and collation order are defined per the system C
+    locale.
+
+inbound_srs {<local part>}{<secret>}
+
+    SRS decode. See SECT 58.5 for details.
+
+inlist {<string1>}{<string2>}, inlisti {<string1>}{<string2>}
+
+    Both strings are expanded; the second string is treated as a list of simple
+    strings; if the first string is a member of the second, then the condition
+    is true. For the case-independent inlisti condition, case is defined per
+    the system C locale.
+
+    These are simpler to use versions of the more powerful forany condition.
+    Examples, and the forany equivalents:
+
+    ${if inlist{needle}{foo:needle:bar}}
+      ${if forany{foo:needle:bar}{eq{$item}{needle}}}
+    ${if inlisti{Needle}{fOo:NeeDLE:bAr}}
+      ${if forany{fOo:NeeDLE:bAr}{eqi{$item}{Needle}}}
+
+    The variable $value will be set for a successful match and can be used in
+    the success clause of an if expansion item using the condition. It will
+    have the same taint status as the list; expansions such as
+
+    ${if inlist {$h_mycode:} {0 : 1 : 42} {$value}}
+
+    can be used for de-tainting. Any previous $value is restored after the if.
+
+isip {<string>}, isip4 {<string>}, isip6 {<string>}
+
+    The substring is first expanded, and then tested to see if it has the form
+    of an IP address. Both IPv4 and IPv6 addresses are valid for isip, whereas 
+    isip4 and isip6 test specifically for IPv4 or IPv6 addresses.
+
+    For an IPv4 address, the test is for four dot-separated components, each of
+    which consists of from one to three digits. For an IPv6 address, up to
+    eight colon-separated components are permitted, each containing from one to
+    four hexadecimal digits. There may be fewer than eight components if an
+    empty component (adjacent colons) is present. Only one empty component is
+    permitted.
+
+    Note: The checks used to be just on the form of the address; actual
+    numerical values were not considered. Thus, for example, 999.999.999.999
+    passed the IPv4 check. This is no longer the case.
+
+    The main use of these tests is to distinguish between IP addresses and host
+    names, or between IPv4 and IPv6 addresses. For example, you could use
+
+    ${if isip4{$sender_host_address}...
+
+    to test which IP version an incoming SMTP connection is using.
+
+ldapauth {<ldap query>}
+
+    This condition supports user authentication using LDAP. See section 9.14
+    for details of how to use LDAP in lookups and the syntax of queries. For
+    this use, the query must contain a user name and password. The query itself
+    is not used, and can be empty. The condition is true if the password is not
+    empty, and the user name and password are accepted by the LDAP server. An
+    empty password is rejected without calling LDAP because LDAP binds with an
+    empty password are considered anonymous regardless of the username, and
+    will succeed in most configurations. See chapter 33 for details of SMTP
+    authentication, and chapter 34 for an example of how this can be used.
+
+le {<string1>}{<string2>}, lei {<string1>}{<string2>}
+
+    The two substrings are first expanded. The condition is true if the first
+    string is lexically less than or equal to the second string. For le the
+    comparison includes the case of letters, whereas for lei the comparison is
+    case-independent. Case and collation order are defined per the system C
+    locale.
+
+lt {<string1>}{<string2>}, lti {<string1>}{<string2>}
+
+    The two substrings are first expanded. The condition is true if the first
+    string is lexically less than the second string. For lt the comparison
+    includes the case of letters, whereas for lti the comparison is
+    case-independent. Case and collation order are defined per the system C
+    locale.
+
+match {<string1>}{<string2>}
+
+    The two substrings are first expanded. The second is then treated as a
+    regular expression and applied to the first. Because of the pre-expansion,
+    if the regular expression contains dollar, or backslash characters, they
+    must be escaped. Care must also be taken if the regular expression contains
+    braces (curly brackets). A closing brace must be escaped so that it is not
+    taken as a premature termination of <string2>. The easiest approach is to
+    use the "\N" feature to disable expansion of the regular expression. For
+    example,
+
+    ${if match {$local_part}{\N^\d{3}\N} ...
+
+    If the whole expansion string is in double quotes, further escaping of
+    backslashes is also required.
+
+    The condition is true if the regular expression match succeeds. The regular
+    expression is not required to begin with a circumflex metacharacter, but if
+    there is no circumflex, the expression is not anchored, and it may match
+    anywhere in the subject, not just at the start. If you want the pattern to
+    match at the end of the subject, you must include the "$" metacharacter at
+    an appropriate point. All character handling is done in bytes and is not
+    UTF-8 aware, but we might change this in a future Exim release.
+
+    At the start of an if expansion the values of the numeric variable
+    substitutions $1 etc. are remembered. Obeying a match condition that
+    succeeds causes them to be reset to the substrings of that condition and
+    they will have these values during the expansion of the success string. At
+    the end of the if expansion, the previous values are restored. After
+    testing a combination of conditions using or, the subsequent values of the
+    numeric variables are those of the condition that succeeded.
+
+match_address {<string1>}{<string2>}
+
+    See match_local_part.
+
+match_domain {<string1>}{<string2>}
+
+    See match_local_part.
+
+match_ip {<string1>}{<string2>}
+
+    This condition matches an IP address to a list of IP address patterns. It
+    must be followed by two argument strings. The first (after expansion) must
+    be an IP address or an empty string. The second (not expanded) is a
+    restricted host list that can match only an IP address, not a host name.
+    For example:
+
+    ${if match_ip{$sender_host_address}{1.2.3.4:5.6.7.8}{...}{...}}
+
+    The specific types of host list item that are permitted in the list are:
+
+      o An IP address, optionally with a CIDR mask.
+
+      o A single asterisk, which matches any IP address.
+
+      o An empty item, which matches only if the IP address is empty. This
+        could be useful for testing for a locally submitted message or one from
+        specific hosts in a single test such as
+
+          ${if match_ip{$sender_host_address}{:4.3.2.1:...}{...}{...}}
+
+        where the first item in the list is the empty string.
+
+      o The item @[] matches any of the local host's interface addresses.
+
+      o Single-key lookups are assumed to be like "net-" style lookups in host
+        lists, even if "net-" is not specified. There is never any attempt to
+        turn the IP address into a host name. The most common type of linear
+        search for match_ip is likely to be iplsearch, in which the file can
+        contain CIDR masks. For example:
+
+          ${if match_ip{$sender_host_address}{iplsearch;/some/file}...
+
+        It is of course possible to use other kinds of lookup, and in such a
+        case, you do need to specify the "net-" prefix if you want to specify a
+        specific address mask, for example:
+
+          ${if match_ip{$sender_host_address}{net24-dbm;/some/file}...
+
+        However, unless you are combining a match_ip condition with others, it
+        is just as easy to use the fact that a lookup is itself a condition,
+        and write:
+
+          ${lookup{${mask:$sender_host_address/24}}dbm{/a/file}...
+
+    Note that <string2> is not itself subject to string expansion, unless Exim
+    was built with the EXPAND_LISTMATCH_RHS option.
+
+    Consult section 10.12 for further details of these patterns.
+
+match_local_part {<string1>}{<string2>}
+
+    This condition, together with match_address and match_domain, make it
+    possible to test domain, address, and local part lists within expansions.
+    Each condition requires two arguments: an item and a list to match. A
+    trivial example is:
+
+    ${if match_domain{a.b.c}{x.y.z:a.b.c:p.q.r}{yes}{no}}
+
+    In each case, the second argument may contain any of the allowable items
+    for a list of the appropriate type. Also, because the second argument is a
+    standard form of list, it is possible to refer to a named list. Thus, you
+    can use conditions like this:
+
+    ${if match_domain{$domain}{+local_domains}{...
+
+    For address lists, the matching starts off caselessly, but the "+caseful"
+    item can be used, as in all address lists, to cause subsequent items to
+    have their local parts matched casefully. Domains are always matched
+    caselessly.
+
+    The variable $value will be set for a successful match and can be used in
+    the success clause of an if expansion item using the condition. It will
+    have the same taint status as the list; expansions such as
+
+    ${if match_local_part {$local_part} {alice : bill : charlotte : dave} {$value}}
+
+    can be used for de-tainting. Any previous $value is restored after the if.
+
+    Note that <string2> is not itself subject to string expansion, unless Exim
+    was built with the EXPAND_LISTMATCH_RHS option.
+
+    Note: Host lists are not supported in this way. This is because hosts have
+    two identities: a name and an IP address, and it is not clear how to
+    specify cleanly how such a test would work. However, IP addresses can be
+    matched using match_ip.
+
+pam {<string1>:<string2>:...}
+
+    Pluggable Authentication Modules (https://mirrors.edge.kernel.org/pub/linux
+    /libs/pam/) are a facility that is available in Solaris and in some GNU/
+    Linux distributions. The Exim support, which is intended for use in
+    conjunction with the SMTP AUTH command, is available only if Exim is
+    compiled with
+
+    SUPPORT_PAM=yes
+
+    in Local/Makefile. You probably need to add -lpam to EXTRALIBS, and in some
+    releases of GNU/Linux -ldl is also needed.
+
+    The argument string is first expanded, and the result must be a
+    colon-separated list of strings. Leading and trailing white space is
+    ignored. The PAM module is initialized with the service name "exim" and the
+    user name taken from the first item in the colon-separated data string (<
+    string1>). The remaining items in the data string are passed over in
+    response to requests from the authentication function. In the simple case
+    there will only be one request, for a password, so the data consists of
+    just two strings.
+
+    There can be problems if any of the strings are permitted to contain colon
+    characters. In the usual way, these have to be doubled to avoid being taken
+    as separators. The listquote expansion item can be used for this. For
+    example, the configuration of a LOGIN authenticator might contain this
+    setting:
+
+    server_condition = ${if pam{$auth1:${listquote{:}{$auth2}}}}
+
+    In some operating systems, PAM authentication can be done only from a
+    process running as root. Since Exim is running as the Exim user when
+    receiving messages, this means that PAM cannot be used directly in those
+    systems.
+
+pwcheck {<string1>:<string2>}
+
+    This condition supports user authentication using the Cyrus pwcheck daemon.
+    This is one way of making it possible for passwords to be checked by a
+    process that is not running as root. Note: The use of pwcheck is now
+    deprecated. Its replacement is saslauthd (see below).
+
+    The pwcheck support is not included in Exim by default. You need to specify
+    the location of the pwcheck daemon's socket in Local/Makefile before
+    building Exim. For example:
+
+    CYRUS_PWCHECK_SOCKET=/var/pwcheck/pwcheck
+
+    You do not need to install the full Cyrus software suite in order to use
+    the pwcheck daemon. You can compile and install just the daemon alone from
+    the Cyrus SASL library. Ensure that exim is the only user that has access
+    to the /var/pwcheck directory.
+
+    The pwcheck condition takes one argument, which must be the user name and
+    password, separated by a colon. For example, in a LOGIN authenticator
+    configuration, you might have this:
+
+    server_condition = ${if pwcheck{$auth1:$auth2}}
+
+    Again, for a PLAIN authenticator configuration, this would be:
+
+    server_condition = ${if pwcheck{$auth2:$auth3}}
+
+queue_running
+
+    This condition, which has no data, is true during delivery attempts that
+    are initiated by queue runner processes, and false otherwise.
+
+radius {<authentication string>}
+
+    Radius authentication (RFC 2865) is supported in a similar way to PAM. You
+    must set RADIUS_CONFIG_FILE in Local/Makefile to specify the location of
+    the Radius client configuration file in order to build Exim with Radius
+    support.
+
+    With just that one setting, Exim expects to be linked with the radiusclient
+    library, using the original API. If you are using release 0.4.0 or later of
+    this library, you need to set
+
+    RADIUS_LIB_TYPE=RADIUSCLIENTNEW
+
+    in Local/Makefile when building Exim. You can also link Exim with the 
+    libradius library that comes with FreeBSD. To do this, set
+
+    RADIUS_LIB_TYPE=RADLIB
+
+    in Local/Makefile, in addition to setting RADIUS_CONFIGURE_FILE. You may
+    also have to supply a suitable setting in EXTRALIBS so that the Radius
+    library can be found when Exim is linked.
+
+    The string specified by RADIUS_CONFIG_FILE is expanded and passed to the
+    Radius client library, which calls the Radius server. The condition is true
+    if the authentication is successful. For example:
+
+    server_condition = ${if radius{<arguments>}}
+
+saslauthd {{<user>}{<password>}{<service>}{<realm>}}
+
+    This condition supports user authentication using the Cyrus saslauthd
+    daemon. This replaces the older pwcheck daemon, which is now deprecated.
+    Using this daemon is one way of making it possible for passwords to be
+    checked by a process that is not running as root.
+
+    The saslauthd support is not included in Exim by default. You need to
+    specify the location of the saslauthd daemon's socket in Local/Makefile
+    before building Exim. For example:
+
+    CYRUS_SASLAUTHD_SOCKET=/var/state/saslauthd/mux
+
+    You do not need to install the full Cyrus software suite in order to use
+    the saslauthd daemon. You can compile and install just the daemon alone
+    from the Cyrus SASL library.
+
+    Up to four arguments can be supplied to the saslauthd condition, but only
+    two are mandatory. For example:
+
+    server_condition = ${if saslauthd{{$auth1}{$auth2}}}
+
+    The service and the realm are optional (which is why the arguments are
+    enclosed in their own set of braces). For details of the meaning of the
+    service and realm, and how to run the daemon, consult the Cyrus
+    documentation.
+
+
+11.8 Combining expansion conditions
+-----------------------------------
+
+Several conditions can be tested at once by combining them using the and and or
+combination conditions. Note that and and or are complete conditions on their
+own, and precede their lists of sub-conditions. Each sub-condition must be
+enclosed in braces within the overall braces that contain the list. No
+repetition of if is used.
+
+or {{<cond1>}{<cond2>}...}
+
+    The sub-conditions are evaluated from left to right. The condition is true
+    if any one of the sub-conditions is true. For example,
+
+    ${if or {{eq{$local_part}{spqr}}{eq{$domain}{testing.com}}}...
+
+    When a true sub-condition is found, the following ones are parsed but not
+    evaluated. If there are several "match" sub-conditions the values of the
+    numeric variables afterwards are taken from the first one that succeeds.
+
+and {{<cond1>}{<cond2>}...}
+
+    The sub-conditions are evaluated from left to right. The condition is true
+    if all of the sub-conditions are true. If there are several "match"
+    sub-conditions, the values of the numeric variables afterwards are taken
+    from the last one. When a false sub-condition is found, the following ones
+    are parsed but not evaluated.
+
+
+11.9 Expansion variables
+------------------------
+
+This section contains an alphabetical list of all the expansion variables. Some
+of them are available only when Exim is compiled with specific options such as
+support for TLS or the content scanning extension.
+
+Variables marked as tainted are likely to carry data supplied by a potential
+attacker. Variables without such marking may also, depending on how their
+values are created. Such variables should not be further expanded, used as
+filenames or used as command-line arguments for external commands.
+
+$0, $1, etc
+
+    When a match expansion condition succeeds, these variables contain the
+    captured substrings identified by the regular expression during subsequent
+    processing of the success string of the containing if expansion item. In
+    the expansion condition case they do not retain their values afterwards; in
+    fact, their previous values are restored at the end of processing an if
+    item. The numerical variables may also be set externally by some other
+    matching process which precedes the expansion of the string. For example,
+    the commands available in Exim filter files include an if command with its
+    own regular expression matching condition.
+
+    If the subject string was tainted then any captured substring will also be.
+
+$acl_arg1, $acl_arg2, etc
+
+    Within an acl condition, expansion condition or expansion item any
+    arguments are copied to these variables, any unused variables being made
+    empty.
+
+$acl_c...
+
+    Values can be placed in these variables by the set modifier in an ACL. They
+    can be given any name that starts with $acl_c and is at least six
+    characters long, but the sixth character must be either a digit or an
+    underscore. For example: $acl_c5, $acl_c_mycount. The values of the
+    $acl_c... variables persist throughout the lifetime of an SMTP connection.
+    They can be used to pass information between ACLs and between different
+    invocations of the same ACL. When a message is received, the values of
+    these variables are saved with the message, and can be accessed by filters,
+    routers, and transports during subsequent delivery.
+
+$acl_m...
+
+    These variables are like the $acl_c... variables, except that their values
+    are reset after a message has been received. Thus, if several messages are
+    received in one SMTP connection, $acl_m... values are not passed on from
+    one message to the next, as $acl_c... values are. The $acl_m... variables
+    are also reset by MAIL, RSET, EHLO, HELO, and after starting a TLS session.
+    When a message is received, the values of these variables are saved with
+    the message, and can be accessed by filters, routers, and transports during
+    subsequent delivery.
+
+$acl_narg
+
+    Within an acl condition, expansion condition or expansion item this
+    variable has the number of arguments.
+
+$acl_verify_message
+
+    After an address verification has failed, this variable contains the
+    failure message. It retains its value for use in subsequent modifiers of
+    the verb. The message can be preserved by coding like this:
+
+    warn !verify = sender
+         set acl_m0 = $acl_verify_message
+
+    You can use $acl_verify_message during the expansion of the message or 
+    log_message modifiers, to include information about the verification
+    failure. Note: The variable is cleared at the end of processing the ACL
+    verb.
+
+$address_data
+
+    This variable is set by means of the address_data option in routers. The
+    value then remains with the address while it is processed by subsequent
+    routers and eventually a transport. If the transport is handling multiple
+    addresses, the value from the first address is used. See chapter 15 for
+    more details. Note: The contents of $address_data are visible in user
+    filter files.
+
+    If $address_data is set when the routers are called from an ACL to verify a
+    recipient address, the final value is still in the variable for subsequent
+    conditions and modifiers of the ACL statement. If routing the address
+    caused it to be redirected to just one address, the child address is also
+    routed as part of the verification, and in this case the final value of
+    $address_data is from the child's routing.
+
+    If $address_data is set when the routers are called from an ACL to verify a
+    sender address, the final value is also preserved, but this time in
+    $sender_address_data, to distinguish it from data from a recipient address.
+
+    In both cases (recipient and sender verification), the value does not
+    persist after the end of the current ACL statement. If you want to preserve
+    these values for longer, you can save them in ACL variables.
+
+$address_file
+
+    When, as a result of aliasing, forwarding, or filtering, a message is
+    directed to a specific file, this variable holds the name of the file when
+    the transport is running. At other times, the variable is empty. For
+    example, using the default configuration, if user r2d2 has a .forward file
+    containing
+
+    /home/r2d2/savemail
+
+    then when the address_file transport is running, $address_file contains the
+    text string "/home/r2d2/savemail". For Sieve filters, the value may be
+    "inbox" or a relative folder name. It is then up to the transport
+    configuration to generate an appropriate absolute path to the relevant
+    file.
+
+$address_pipe
+
+    When, as a result of aliasing or forwarding, a message is directed to a
+    pipe, this variable holds the pipe command when the transport is running.
+
+$auth1 - $auth4
+
+    These variables are used in SMTP authenticators (see chapters 34-42).
+    Elsewhere, they are empty.
+
+$authenticated_id
+
+    When a server successfully authenticates a client it may be configured to
+    preserve some of the authentication information in the variable
+    $authenticated_id (see chapter 33). For example, a user/password
+    authenticator configuration might preserve the user name for use in the
+    routers. Note that this is not the same information that is saved in
+    $sender_host_authenticated.
+
+    When a message is submitted locally (that is, not over a TCP connection)
+    the value of $authenticated_id is normally the login name of the calling
+    process. However, a trusted user can override this by means of the -oMai
+    command line option. This second case also sets up information used by the
+    $authresults expansion item.
+
+$authenticated_fail_id
+
+    When an authentication attempt fails, the variable $authenticated_fail_id
+    will contain the failed authentication id. If more than one authentication
+    id is attempted, it will contain only the last one. The variable is
+    available for processing in the ACL's, generally the quit or notquit ACL. A
+    message to a local recipient could still be accepted without requiring
+    authentication, which means this variable could also be visible in all of
+    the ACL's as well.
+
+$authenticated_sender
+
+    Tainted
+
+    When acting as a server, Exim takes note of the AUTH= parameter on an
+    incoming SMTP MAIL command if it believes the sender is sufficiently
+    trusted, as described in section 33.2. Unless the data is the string "<>",
+    it is set as the authenticated sender of the message, and the value is
+    available during delivery in the $authenticated_sender variable. If the
+    sender is not trusted, Exim accepts the syntax of AUTH=, but ignores the
+    data.
+
+    When a message is submitted locally (that is, not over a TCP connection),
+    the value of $authenticated_sender is an address constructed from the login
+    name of the calling process and $qualify_domain, except that a trusted user
+    can override this by means of the -oMas command line option.
+
+$authentication_failed
+
+    This variable is set to "1" in an Exim server if a client issues an AUTH
+    command that does not succeed. Otherwise it is set to "0". This makes it
+    possible to distinguish between "did not try to authenticate" (
+    $sender_host_authenticated is empty and $authentication_failed is set to
+    "0") and "tried to authenticate but failed" ($sender_host_authenticated is
+    empty and $authentication_failed is set to "1"). Failure includes
+    cancellation of a authentication attempt, and any negative response to an
+    AUTH command, (including, for example, an attempt to use an undefined
+    mechanism).
+
+$av_failed
+
+    This variable is available when Exim is compiled with the content-scanning
+    extension. It is set to "0" by default, but will be set to "1" if any
+    problem occurs with the virus scanner (specified by av_scanner) during the
+    ACL malware condition.
+
+$body_linecount
+
+    When a message is being received or delivered, this variable contains the
+    number of lines in the message's body. See also $message_linecount.
+
+$body_zerocount
+
+    When a message is being received or delivered, this variable contains the
+    number of binary zero bytes (ASCII NULs) in the message's body.
+
+$bounce_recipient
+
+    This is set to the recipient address of a bounce message while Exim is
+    creating it. It is useful if a customized bounce message text file is in
+    use (see chapter 50).
+
+$bounce_return_size_limit
+
+    This contains the value set in the bounce_return_size_limit option, rounded
+    up to a multiple of 1000. It is useful when a customized error message text
+    file is in use (see chapter 50).
+
+$caller_gid
+
+    The real group id under which the process that called Exim was running.
+    This is not the same as the group id of the originator of a message (see
+    $originator_gid). If Exim re-execs itself, this variable in the new
+    incarnation normally contains the Exim gid.
+
+$caller_uid
+
+    The real user id under which the process that called Exim was running. This
+    is not the same as the user id of the originator of a message (see
+    $originator_uid). If Exim re-execs itself, this variable in the new
+    incarnation normally contains the Exim uid.
+
+$callout_address
+
+    After a callout for verification, spamd or malware daemon service, the
+    address that was connected to.
+
+$compile_number
+
+    The building process for Exim keeps a count of the number of times it has
+    been compiled. This serves to distinguish different compilations of the
+    same version of Exim.
+
+$config_dir
+
+    The directory name of the main configuration file. That is, the content of
+    $config_file with the last component stripped. The value does not contain
+    the trailing slash. If $config_file does not contain a slash, $config_dir
+    is ".".
+
+$config_file
+
+    The name of the main configuration file Exim is using.
+
+$dkim_verify_status
+
+    Results of DKIM verification. For details see section 58.3.
+
+$dkim_cur_signer, $dkim_verify_reason, $dkim_domain, $dkim_identity, 
+$dkim_selector, $dkim_algo, $dkim_canon_body, $dkim_canon_headers, 
+$dkim_copiedheaders, $dkim_bodylength, $dkim_created, $dkim_expires, 
+$dkim_headernames, $dkim_key_testing, $dkim_key_nosubdomains, $dkim_key_srvtype
+, $dkim_key_granularity, $dkim_key_notes, $dkim_key_length
+
+    These variables are only available within the DKIM ACL. For details see
+    section 58.3.
+
+$dkim_signers
+
+    When a message has been received this variable contains a colon-separated
+    list of signer domains and identities for the message. For details see
+    section 58.3.
+
+$dmarc_domain_policy, $dmarc_status, $dmarc_status_text, $dmarc_used_domains
+
+    Results of DMARC verification. For details see section 58.6.
+
+$dnslist_domain, $dnslist_matched, $dnslist_text, $dnslist_value
+
+    When a DNS (black) list lookup succeeds, these variables are set to contain
+    the following data from the lookup: the list's domain name, the key that
+    was looked up, the contents of any associated TXT record, and the value
+    from the main A record. See section 44.32 for more details.
+
+$domain
+
+    Tainted
+
+    When an address is being routed, or delivered on its own, this variable
+    contains the domain. Uppercase letters in the domain are converted into
+    lower case for $domain.
+
+    Global address rewriting happens when a message is received, so the value
+    of $domain during routing and delivery is the value after rewriting.
+    $domain is set during user filtering, but not during system filtering,
+    because a message may have many recipients and the system filter is called
+    just once.
+
+    When more than one address is being delivered at once (for example, several
+    RCPT commands in one SMTP delivery), $domain is set only if they all have
+    the same domain. Transports can be restricted to handling only one domain
+    at a time if the value of $domain is required at transport time - this is
+    the default for local transports. For further details of the environment in
+    which local transports are run, see chapter 23.
+
+    At the end of a delivery, if all deferred addresses have the same domain,
+    it is set in $domain during the expansion of delay_warning_condition.
+
+    The $domain variable is also used in some other circumstances:
+
+      o When an ACL is running for a RCPT command, $domain contains the domain
+        of the recipient address. The domain of the sender address is in
+        $sender_address_domain at both MAIL time and at RCPT time. $domain is
+        not normally set during the running of the MAIL ACL. However, if the
+        sender address is verified with a callout during the MAIL ACL, the
+        sender domain is placed in $domain during the expansions of hosts, 
+        interface, and port in the smtp transport.
+
+      o When a rewrite item is being processed (see chapter 31), $domain
+        contains the domain portion of the address that is being rewritten; it
+        can be used in the expansion of the replacement address, for example,
+        to rewrite domains by file lookup.
+
+      o With one important exception, whenever a domain list is being scanned,
+        $domain contains the subject domain. Exception: When a domain list in a
+        sender_domains condition in an ACL is being processed, the subject
+        domain is in $sender_address_domain and not in $domain. It works this
+        way so that, in a RCPT ACL, the sender domain list can be dependent on
+        the recipient domain (which is what is in $domain at this time).
+
+      o When the smtp_etrn_command option is being expanded, $domain contains
+        the complete argument of the ETRN command (see section 49.8).
+
+    If the origin of the data is an incoming message, the result of expanding
+    this variable is tainted and may not be further expanded or used as a
+    filename. When an untainted version is needed, one should be obtained from
+    looking up the value in a local (therefore trusted) database. Often
+    $domain_data is usable in this role.
+
+$domain_data
+
+    When the domains condition on a router or an ACL matches a domain against a
+    list, the match value is copied to $domain_data. This is an enhancement
+    over previous versions of Exim, when it only applied to the data read by a
+    lookup. For details on match values see section 10.5 et. al.
+
+    If the router routes the address to a transport, the value is available in
+    that transport. If the transport is handling multiple addresses, the value
+    from the first address is used.
+
+    $domain_data set in an ACL is available during the rest of the ACL
+    statement.
+
+$exim_gid
+
+    This variable contains the numerical value of the Exim group id.
+
+$exim_path
+
+    This variable contains the path to the Exim binary.
+
+$exim_uid
+
+    This variable contains the numerical value of the Exim user id.
+
+$exim_version
+
+    This variable contains the version string of the Exim build. The first
+    character is a major version number, currently 4. Then after a dot, the
+    next group of digits is a minor version number. There may be other
+    characters following the minor version. This value may be overridden by the
+    exim_version main config option.
+
+$header_<name>
+
+    Tainted
+
+    This is not strictly an expansion variable. It is expansion syntax for
+    inserting the message header line with the given name. Note that the name
+    must be terminated by colon or white space, because it may contain a wide
+    variety of characters. Note also that braces must not be used. See the full
+    description in section 11.5 above.
+
+$headers_added
+
+    Within an ACL this variable contains the headers added so far by the ACL
+    modifier add_header (section 44.24). The headers are a newline-separated
+    list.
+
+$home
+
+    When the check_local_user option is set for a router, the user's home
+    directory is placed in $home when the check succeeds. In particular, this
+    means it is set during the running of users' filter files. A router may
+    also explicitly set a home directory for use by a transport; this can be
+    overridden by a setting on the transport itself.
+
+    When running a filter test via the -bf option, $home is set to the value of
+    the environment variable HOME, which is subject to the keep_environment and
+    add_environment main config options.
+
+$host
+
+    If a router assigns an address to a transport (any transport), and passes a
+    list of hosts with the address, the value of $host when the transport
+    starts to run is the name of the first host on the list. Note that this
+    applies both to local and remote transports.
+
+    For the smtp transport, if there is more than one host, the value of $host
+    changes as the transport works its way through the list. In particular,
+    when the smtp transport is expanding its options for encryption using TLS,
+    or for specifying a transport filter (see chapter 24), $host contains the
+    name of the host to which it is connected.
+
+    When used in the client part of an authenticator configuration (see chapter
+    33), $host contains the name of the server to which the client is
+    connected.
+
+$host_address
+
+    This variable is set to the remote host's IP address whenever $host is set
+    for a remote connection. It is also set to the IP address that is being
+    checked when the ignore_target_hosts option is being processed.
+
+$host_data
+
+    If a hosts condition in an ACL is satisfied by means of a lookup, the
+    result of the lookup is made available in the $host_data variable. This
+    allows you, for example, to do things like this:
+
+    deny  hosts = net-lsearch;/some/file
+          message = $host_data
+
+$host_lookup_deferred
+
+    This variable normally contains "0", as does $host_lookup_failed. When a
+    message comes from a remote host and there is an attempt to look up the
+    host's name from its IP address, and the attempt is not successful, one of
+    these variables is set to "1".
+
+      o If the lookup receives a definite negative response (for example, a DNS
+        lookup succeeded, but no records were found), $host_lookup_failed is
+        set to "1".
+
+      o If there is any kind of problem during the lookup, such that Exim
+        cannot tell whether or not the host name is defined (for example, a
+        timeout for a DNS lookup), $host_lookup_deferred is set to "1".
+
+    Looking up a host's name from its IP address consists of more than just a
+    single reverse lookup. Exim checks that a forward lookup of at least one of
+    the names it receives from a reverse lookup yields the original IP address.
+    If this is not the case, Exim does not accept the looked up name(s), and
+    $host_lookup_failed is set to "1". Thus, being able to find a name from an
+    IP address (for example, the existence of a PTR record in the DNS) is not
+    sufficient on its own for the success of a host name lookup. If the reverse
+    lookup succeeds, but there is a lookup problem such as a timeout when
+    checking the result, the name is not accepted, and $host_lookup_deferred is
+    set to "1". See also $sender_host_name.
+
+    Performing these checks sets up information used by the authresults
+    expansion item.
+
+$host_lookup_failed
+
+    See $host_lookup_deferred.
+
+$host_port
+
+    This variable is set to the remote host's TCP port whenever $host is set
+    for an outbound connection.
+
+$initial_cwd
+
+    This variable contains the full path name of the initial working directory
+    of the current Exim process. This may differ from the current working
+    directory, as Exim changes this to "/" during early startup, and to
+    $spool_directory later.
+
+$inode
+
+    The only time this variable is set is while expanding the directory_file
+    option in the appendfile transport. The variable contains the inode number
+    of the temporary file which is about to be renamed. It can be used to
+    construct a unique name for the file.
+
+$interface_address, $interface_port
+
+    These are obsolete names for $received_ip_address and $received_port.
+
+$item
+
+    This variable is used during the expansion of forall and forany conditions
+    (see section 11.7), and filter, map, and reduce items (see section 11.7).
+    In other circumstances, it is empty.
+
+$ldap_dn
+
+    This variable, which is available only when Exim is compiled with LDAP
+    support, contains the DN from the last entry in the most recently
+    successful LDAP lookup.
+
+$load_average
+
+    This variable contains the system load average, multiplied by 1000 so that
+    it is an integer. For example, if the load average is 0.21, the value of
+    the variable is 210. The value is recomputed every time the variable is
+    referenced.
+
+$local_part
+
+    Tainted
+
+    When an address is being routed, or delivered on its own, this variable
+    contains the local part. When a number of addresses are being delivered
+    together (for example, multiple RCPT commands in an SMTP session),
+    $local_part is not set.
+
+    Global address rewriting happens when a message is received, so the value
+    of $local_part during routing and delivery is the value after rewriting.
+    $local_part is set during user filtering, but not during system filtering,
+    because a message may have many recipients and the system filter is called
+    just once.
+
+    If the origin of the data is an incoming message, the result of expanding
+    this variable is tainted and may not be further expanded or used as a
+    filename.
+
+    Warning: the content of this variable is usually provided by a potential
+    attacker. Consider carefully the implications of using it unvalidated as a
+    name for file access. This presents issues for users' .forward and filter
+    files. For traditional full user accounts, use check_local_users and the
+    $local_part_data variable rather than this one. For virtual users, store a
+    suitable pathname component in the database which is used for account name
+    validation, and use that retrieved value rather than this variable. Often
+    $local_part_data is usable in this role. If needed, use a router 
+    address_data or set option for the retrieved data.
+
+    When a message is being delivered to a file, pipe, or autoreply transport
+    as a result of aliasing or forwarding, $local_part is set to the local part
+    of the parent address, not to the filename or command (see $address_file
+    and $address_pipe).
+
+    When an ACL is running for a RCPT command, $local_part contains the local
+    part of the recipient address.
+
+    When a rewrite item is being processed (see chapter 31), $local_part
+    contains the local part of the address that is being rewritten; it can be
+    used in the expansion of the replacement address, for example.
+
+    In all cases, all quoting is removed from the local part. For example, for
+    both the addresses
+
+    "abc:xyz"@test.example
+    abc\:xyz@test.example
+
+    the value of $local_part is
+
+    abc:xyz
+
+    If you use $local_part to create another address, you should always wrap it
+    inside a quoting operator. For example, in a redirect router you could
+    have:
+
+    data = ${quote_local_part:$local_part}@new.domain.example
+
+    Note: The value of $local_part is normally lower cased. If you want to
+    process local parts in a case-dependent manner in a router, you can set the
+    caseful_local_part option (see chapter 15).
+
+$local_part_data
+
+    When the local_parts condition on a router or ACL matches a local part list
+    the match value is copied to $local_part_data. This is an enhancement over
+    previous versions of Exim, when it only applied to the data read by a
+    lookup. For details on match values see section 10.5 et. al.
+
+    The check_local_user router option also sets this variable.
+
+    If a local part prefix or suffix has been recognized, it is not included in
+    the value of $local_part during routing and subsequent delivery. The values
+    of any prefix or suffix are in $local_part_prefix and $local_part_suffix,
+    respectively. If the specification did not include a wildcard then the
+    affix variable value is not tainted.
+
+    If the affix specification included a wildcard then the portion of the
+    affix matched by the wildcard is in $local_part_prefix_v or
+    $local_part_suffix_v as appropriate, and both the whole and varying values
+    are tainted.
+
+$local_scan_data
+
+    This variable contains the text returned by the local_scan() function when
+    a message is received. See chapter 46 for more details.
+
+$local_user_gid
+
+    See $local_user_uid.
+
+$local_user_uid
+
+    This variable and $local_user_gid are set to the uid and gid after the 
+    check_local_user router precondition succeeds. This means that their values
+    are available for the remaining preconditions (senders, require_files, and 
+    condition), for the address_data expansion, and for any router-specific
+    expansions. At all other times, the values in these variables are "(uid_t)
+    (-1)" and "(gid_t)(-1)", respectively.
+
+$localhost_number
+
+    This contains the expanded value of the localhost_number option. The
+    expansion happens after the main options have been read.
+
+$log_inodes
+
+    The number of free inodes in the disk partition where Exim's log files are
+    being written. The value is recalculated whenever the variable is
+    referenced. If the relevant file system does not have the concept of
+    inodes, the value of is -1. See also the check_log_inodes option.
+
+$log_space
+
+    The amount of free space (as a number of kilobytes) in the disk partition
+    where Exim's log files are being written. The value is recalculated
+    whenever the variable is referenced. If the operating system does not have
+    the ability to find the amount of free space (only true for experimental
+    systems), the space value is -1. See also the check_log_space option.
+
+$lookup_dnssec_authenticated
+
+    This variable is set after a DNS lookup done by a dnsdb lookup expansion,
+    dnslookup router or smtp transport. It will be empty if DNSSEC was not
+    requested, "no" if the result was not labelled as authenticated data and
+    "yes" if it was. Results that are labelled as authoritative answer that
+    match the dns_trust_aa configuration variable count also as authenticated
+    data.
+
+$mailstore_basename
+
+    This variable is set only when doing deliveries in "mailstore" format in
+    the appendfile transport. During the expansion of the mailstore_prefix, 
+    mailstore_suffix, message_prefix, and message_suffix options, it contains
+    the basename of the files that are being written, that is, the name without
+    the ".tmp", ".env", or ".msg" suffix. At all other times, this variable is
+    empty.
+
+$malware_name
+
+    This variable is available when Exim is compiled with the content-scanning
+    extension. It is set to the name of the virus that was found when the ACL 
+    malware condition is true (see section 45.1).
+
+$max_received_linelength
+
+    This variable contains the number of bytes in the longest line that was
+    received as part of the message, not counting the line termination
+    character(s). It is not valid if the spool_wireformat option is used.
+
+$message_age
+
+    This variable is set at the start of a delivery attempt to contain the
+    number of seconds since the message was received. It does not change during
+    a single delivery attempt.
+
+$message_body
+
+    Tainted
+
+    This variable contains the initial portion of a message's body while it is
+    being delivered, and is intended mainly for use in filter files. The
+    maximum number of characters of the body that are put into the variable is
+    set by the message_body_visible configuration option; the default is 500.
+
+    By default, newlines are converted into spaces in $message_body, to make it
+    easier to search for phrases that might be split over a line break.
+    However, this can be disabled by setting message_body_newlines to be true.
+    Binary zeros are always converted into spaces.
+
+$message_body_end
+
+    Tainted
+
+    This variable contains the final portion of a message's body while it is
+    being delivered. The format and maximum size are as for $message_body.
+
+$message_body_size
+
+    When a message is being delivered, this variable contains the size of the
+    body in bytes. The count starts from the character after the blank line
+    that separates the body from the header. Newlines are included in the
+    count. See also $message_size, $body_linecount, and $body_zerocount.
+
+    If the spool file is wireformat (see the spool_wireformat main option) the
+    CRLF line-terminators are included in the count.
+
+$message_exim_id
+
+    When a message is being received or delivered, this variable contains the
+    unique message id that is generated and used by Exim to identify the
+    message. An id is not created for a message until after its header has been
+    successfully received. Note: This is not the contents of the Message-ID:
+    header line; it is the local id that Exim assigns to the message, for
+    example: "1BXTIK-0001yO-VA".
+
+$message_headers
+
+    Tainted
+
+    This variable contains a concatenation of all the header lines when a
+    message is being processed, except for lines added by routers or
+    transports. The header lines are separated by newline characters. Their
+    contents are decoded in the same way as a header line that is inserted by 
+    bheader.
+
+$message_headers_raw
+
+    Tainted
+
+    This variable is like $message_headers except that no processing of the
+    contents of header lines is done.
+
+$message_id
+
+    This is an old name for $message_exim_id. It is now deprecated.
+
+$message_linecount
+
+    This variable contains the total number of lines in the header and body of
+    the message. Compare $body_linecount, which is the count for the body only.
+    During the DATA and content-scanning ACLs, $message_linecount contains the
+    number of lines received. Before delivery happens (that is, before filters,
+    routers, and transports run) the count is increased to include the 
+    Received: header line that Exim standardly adds, and also any other header
+    lines that are added by ACLs. The blank line that separates the message
+    header from the body is not counted.
+
+    As with the special case of $message_size, during the expansion of the
+    appendfile transport's maildir_tag option in maildir format, the value of
+    $message_linecount is the precise size of the number of newlines in the
+    file that has been written (minus one for the blank line between the header
+    and the body).
+
+    Here is an example of the use of this variable in a DATA ACL:
+
+    deny condition = \
+          ${if <{250}{${eval:$message_linecount - $body_linecount}}}
+         message   = Too many lines in message header
+
+    In the MAIL and RCPT ACLs, the value is zero because at that stage the
+    message has not yet been received.
+
+    This variable is not valid if the spool_wireformat option is used.
+
+$message_size
+
+    When a message is being processed, this variable contains its size in
+    bytes. In most cases, the size includes those headers that were received
+    with the message, but not those (such as Envelope-to:) that are added to
+    individual deliveries as they are written. However, there is one special
+    case: during the expansion of the maildir_tag option in the appendfile
+    transport while doing a delivery in maildir format, the value of
+    $message_size is the precise size of the file that has been written. See
+    also $message_body_size, $body_linecount, and $body_zerocount.
+
+    While running a per message ACL (mail/rcpt/predata), $message_size contains
+    the size supplied on the MAIL command, or -1 if no size was given. The
+    value may not, of course, be truthful.
+
+$mime_anomaly_level, $mime_anomaly_text, $mime_boundary, $mime_charset, 
+$mime_content_description, $mime_content_disposition, $mime_content_id, 
+$mime_content_size, $mime_content_transfer_encoding, $mime_content_type, 
+$mime_decoded_filename, $mime_filename, $mime_is_coverletter, 
+$mime_is_multipart, $mime_is_rfc822, $mime_part_count
+
+    A number of variables whose names start with $mime are available when Exim
+    is compiled with the content-scanning extension. For details, see section
+    45.4.
+
+$n0 - $n9
+
+    These variables are counters that can be incremented by means of the add
+    command in filter files.
+
+$original_domain
+
+    Tainted
+
+    When a top-level address is being processed for delivery, this contains the
+    same value as $domain. However, if a "child" address (for example,
+    generated by an alias, forward, or filter file) is being processed, this
+    variable contains the domain of the original address (lower cased). This
+    differs from $parent_domain only when there is more than one level of
+    aliasing or forwarding. When more than one address is being delivered in a
+    single transport run, $original_domain is not set.
+
+    If a new address is created by means of a deliver command in a system
+    filter, it is set up with an artificial "parent" address. This has the
+    local part system-filter and the default qualify domain.
+
+$original_local_part
+
+    Tainted
+
+    When a top-level address is being processed for delivery, this contains the
+    same value as $local_part, unless a prefix or suffix was removed from the
+    local part, because $original_local_part always contains the full local
+    part. When a "child" address (for example, generated by an alias, forward,
+    or filter file) is being processed, this variable contains the full local
+    part of the original address.
+
+    If the router that did the redirection processed the local part
+    case-insensitively, the value in $original_local_part is in lower case.
+    This variable differs from $parent_local_part only when there is more than
+    one level of aliasing or forwarding. When more than one address is being
+    delivered in a single transport run, $original_local_part is not set.
+
+    If a new address is created by means of a deliver command in a system
+    filter, it is set up with an artificial "parent" address. This has the
+    local part system-filter and the default qualify domain.
+
+$originator_gid
+
+    This variable contains the value of $caller_gid that was set when the
+    message was received. For messages received via the command line, this is
+    the gid of the sending user. For messages received by SMTP over TCP/IP,
+    this is normally the gid of the Exim user.
+
+$originator_uid
+
+    The value of $caller_uid that was set when the message was received. For
+    messages received via the command line, this is the uid of the sending
+    user. For messages received by SMTP over TCP/IP, this is normally the uid
+    of the Exim user.
+
+$parent_domain
+
+    Tainted
+
+    This variable is similar to $original_domain (see above), except that it
+    refers to the immediately preceding parent address.
+
+$parent_local_part
+
+    Tainted
+
+    This variable is similar to $original_local_part (see above), except that
+    it refers to the immediately preceding parent address.
+
+$pid
+
+    This variable contains the current process id.
+
+$pipe_addresses
+
+    This is not an expansion variable, but is mentioned here because the string
+    "$pipe_addresses" is handled specially in the command specification for the
+    pipe transport (chapter 29) and in transport filters (described under 
+    transport_filter in chapter 24). It cannot be used in general expansion
+    strings, and provokes an "unknown variable" error if encountered.
+
+    Note: This value permits data supplied by a potential attacker to be used
+    in the command for a pipe transport. Such configurations should be
+    carefully assessed for security vulnerbilities.
+
+$primary_hostname
+
+    This variable contains the value set by primary_hostname in the
+    configuration file, or read by the uname() function. If uname() returns a
+    single-component name, Exim calls gethostbyname() (or getipnodebyname()
+    where available) in an attempt to acquire a fully qualified host name. See
+    also $smtp_active_hostname.
+
+$proxy_external_address, $proxy_external_port, $proxy_local_address, 
+$proxy_local_port, $proxy_session
+
+    These variables are only available when built with Proxy Protocol or SOCKS5
+    support. For details see chapter 59.1.
+
+$prdr_requested
+
+    This variable is set to "yes" if PRDR was requested by the client for the
+    current message, otherwise "no".
+
+$prvscheck_address, $prvscheck_keynum, $prvscheck_result
+
+    These variables are used in conjunction with the prvscheck expansion item,
+    which is described in sections 11.5 and 44.53.
+
+$qualify_domain
+
+    The value set for the qualify_domain option in the configuration file.
+
+$qualify_recipient
+
+    The value set for the qualify_recipient option in the configuration file,
+    or if not set, the value of $qualify_domain.
+
+$queue_name
+
+    The name of the spool queue in use; empty for the default queue.
+
+$queue_size
+
+    This variable contains the number of messages queued. It is evaluated on
+    demand, but no more often than once every minute. If there is no daemon
+    notifier socket open, the value will be an empty string.
+
+$r_...
+
+    Values can be placed in these variables by the set option of a router. They
+    can be given any name that starts with $r_. The values persist for the
+    address being handled through subsequent routers and the eventual
+    transport.
+
+$rcpt_count
+
+    When a message is being received by SMTP, this variable contains the number
+    of RCPT commands received for the current message. If this variable is used
+    in a RCPT ACL, its value includes the current command.
+
+$rcpt_defer_count
+
+    When a message is being received by SMTP, this variable contains the number
+    of RCPT commands in the current message that have previously been rejected
+    with a temporary (4xx) response.
+
+$rcpt_fail_count
+
+    When a message is being received by SMTP, this variable contains the number
+    of RCPT commands in the current message that have previously been rejected
+    with a permanent (5xx) response.
+
+$received_count
+
+    This variable contains the number of Received: header lines in the message,
+    including the one added by Exim (so its value is always greater than zero).
+    It is available in the DATA ACL, the non-SMTP ACL, and while routing and
+    delivering.
+
+$received_for
+
+    Tainted
+
+    If there is only a single recipient address in an incoming message, this
+    variable contains that address when the Received: header line is being
+    built. The value is copied after recipient rewriting has happened, but
+    before the local_scan() function is run.
+
+$received_ip_address, $received_port
+
+    As soon as an Exim server starts processing an incoming TCP/IP connection,
+    these variables are set to the address and port on the local IP interface.
+    (The remote IP address and port are in $sender_host_address and
+    $sender_host_port.) When testing with -bh, the port value is -1 unless it
+    has been set using the -oMi command line option.
+
+    As well as being useful in ACLs (including the "connect" ACL), these
+    variable could be used, for example, to make the filename for a TLS
+    certificate depend on which interface and/or port is being used for the
+    incoming connection. The values of $received_ip_address and $received_port
+    are saved with any messages that are received, thus making these variables
+    available at delivery time. For outbound connections see
+    $sending_ip_address.
+
+$received_protocol
+
+    When a message is being processed, this variable contains the name of the
+    protocol by which it was received. Most of the names used by Exim are
+    defined by RFCs 821, 2821, and 3848. They start with "smtp" (the client
+    used HELO) or "esmtp" (the client used EHLO). This can be followed by "s"
+    for secure (encrypted) and/or "a" for authenticated. Thus, for example, if
+    the protocol is set to "esmtpsa", the message was received over an
+    encrypted SMTP connection and the client was successfully authenticated.
+
+    Exim uses the protocol name "smtps" for the case when encryption is
+    automatically set up on connection without the use of STARTTLS (see 
+    tls_on_connect_ports), and the client uses HELO to initiate the encrypted
+    SMTP session. The name "smtps" is also used for the rare situation where
+    the client initially uses EHLO, sets up an encrypted connection using
+    STARTTLS, and then uses HELO afterwards.
+
+    The -oMr option provides a way of specifying a custom protocol name for
+    messages that are injected locally by trusted callers. This is commonly
+    used to identify messages that are being re-injected after some kind of
+    scanning.
+
+$received_time
+
+    This variable contains the date and time when the current message was
+    received, as a number of seconds since the start of the Unix epoch.
+
+$recipient_data
+
+    This variable is set after an indexing lookup success in an ACL recipients
+    condition. It contains the data from the lookup, and the value remains set
+    until the next recipients test. Thus, you can do things like this:
+
+    require recipients  = cdb*@;/some/file
+    deny    some further test involving $recipient_data
+
+    Warning: This variable is set only when a lookup is used as an indexing
+    method in the address list, using the semicolon syntax as in the example
+    above. The variable is not set for a lookup that is used as part of the
+    string expansion that all such lists undergo before being interpreted.
+
+$recipient_verify_failure
+
+    In an ACL, when a recipient verification fails, this variable contains
+    information about the failure. It is set to one of the following words:
+
+      o "qualify": The address was unqualified (no domain), and the message was
+        neither local nor came from an exempted host.
+
+      o "route": Routing failed.
+
+      o "mail": Routing succeeded, and a callout was attempted; rejection
+        occurred at or before the MAIL command (that is, on initial connection,
+        HELO, or MAIL).
+
+      o "recipient": The RCPT command in a callout was rejected.
+
+      o "postmaster": The postmaster check in a callout was rejected.
+
+    The main use of this variable is expected to be to distinguish between
+    rejections of MAIL and rejections of RCPT.
+
+$recipients
+
+    Tainted
+
+    This variable contains a list of envelope recipients for a message. A comma
+    and a space separate the addresses in the replacement text. However, the
+    variable is not generally available, to prevent exposure of Bcc recipients
+    in unprivileged users' filter files. You can use $recipients only in these
+    cases:
+
+     1. In a system filter file.
+
+     2. In the ACLs associated with the DATA command and with non-SMTP
+        messages, that is, the ACLs defined by acl_smtp_predata, acl_smtp_data,
+        acl_smtp_mime, acl_not_smtp_start, acl_not_smtp, and acl_not_smtp_mime.
+
+     3. From within a local_scan() function.
+
+$recipients_count
+
+    When a message is being processed, this variable contains the number of
+    envelope recipients that came with the message. Duplicates are not excluded
+    from the count. While a message is being received over SMTP, the number
+    increases for each accepted recipient. It can be referenced in an ACL.
+
+$regex_match_string
+
+    This variable is set to contain the matching regular expression after a 
+    regex ACL condition has matched (see section 45.5).
+
+$regex1, $regex2, etc
+
+    When a regex or mime_regex ACL condition succeeds, these variables contain
+    the captured substrings identified by the regular expression.
+
+    If the subject string was tainted then so will any captured substring.
+
+$reply_address
+
+    Tainted
+
+    When a message is being processed, this variable contains the contents of
+    the Reply-To: header line if one exists and it is not empty, or otherwise
+    the contents of the From: header line. Apart from the removal of leading
+    white space, the value is not processed in any way. In particular, no RFC
+    2047 decoding or character code translation takes place.
+
+$return_path
+
+    When a message is being delivered, this variable contains the return path -
+    the sender field that will be sent as part of the envelope. It is not
+    enclosed in <> characters. At the start of routing an address, $return_path
+    has the same value as $sender_address, but if, for example, an incoming
+    message to a mailing list has been expanded by a router which specifies a
+    different address for bounce messages, $return_path subsequently contains
+    the new bounce address, whereas $sender_address always contains the
+    original sender address that was received with the message. In other words,
+    $sender_address contains the incoming envelope sender, and $return_path
+    contains the outgoing envelope sender.
+
+$return_size_limit
+
+    This is an obsolete name for $bounce_return_size_limit.
+
+$router_name
+
+    During the running of a router this variable contains its name.
+
+$runrc
+
+    This variable contains the return code from a command that is run by the $
+    {run...} expansion item. Warning: In a router or transport, you cannot
+    assume the order in which option values are expanded, except for those
+    preconditions whose order of testing is documented. Therefore, you cannot
+    reliably expect to set $runrc by the expansion of one option, and use it in
+    another.
+
+$self_hostname
+
+    When an address is routed to a supposedly remote host that turns out to be
+    the local host, what happens is controlled by the self generic router
+    option. One of its values causes the address to be passed to another
+    router. When this happens, $self_hostname is set to the name of the local
+    host that the original router encountered. In other circumstances its
+    contents are null.
+
+$sender_address
+
+    Tainted
+
+    When a message is being processed, this variable contains the sender's
+    address that was received in the message's envelope. The case of letters in
+    the address is retained, in both the local part and the domain. For bounce
+    messages, the value of this variable is the empty string. See also
+    $return_path.
+
+$sender_address_data
+
+    If $address_data is set when the routers are called from an ACL to verify a
+    sender address, the final value is preserved in $sender_address_data, to
+    distinguish it from data from a recipient address. The value does not
+    persist after the end of the current ACL statement. If you want to preserve
+    it for longer, you can save it in an ACL variable.
+
+$sender_address_domain
+
+    Tainted
+
+    The domain portion of $sender_address.
+
+$sender_address_local_part
+
+    Tainted
+
+    The local part portion of $sender_address.
+
+$sender_data
+
+    This variable is set after a lookup success in an ACL senders condition or
+    in a router senders option. It contains the data from the lookup, and the
+    value remains set until the next senders test. Thus, you can do things like
+    this:
+
+    require senders      = cdb*@;/some/file
+    deny    some further test involving $sender_data
+
+    Warning: This variable is set only when a lookup is used as an indexing
+    method in the address list, using the semicolon syntax as in the example
+    above. The variable is not set for a lookup that is used as part of the
+    string expansion that all such lists undergo before being interpreted.
+
+$sender_fullhost
+
+    When a message is received from a remote host, this variable contains the
+    host name and IP address in a single string. It ends with the IP address in
+    square brackets, followed by a colon and a port number if the logging of
+    ports is enabled. The format of the rest of the string depends on whether
+    the host issued a HELO or EHLO SMTP command, and whether the host name was
+    verified by looking up its IP address. (Looking up the IP address can be
+    forced by the host_lookup option, independent of verification.) A plain
+    host name at the start of the string is a verified host name; if this is
+    not present, verification either failed or was not requested. A host name
+    in parentheses is the argument of a HELO or EHLO command. This is omitted
+    if it is identical to the verified host name or to the host's IP address in
+    square brackets.
+
+$sender_helo_dnssec
+
+    This boolean variable is true if a successful HELO verification was done
+    using DNS information the resolver library stated was authenticated data.
+
+$sender_helo_name
+
+    Tainted
+
+    When a message is received from a remote host that has issued a HELO or
+    EHLO command, the argument of that command is placed in this variable. It
+    is also set if HELO or EHLO is used when a message is received using SMTP
+    locally via the -bs or -bS options.
+
+$sender_host_address
+
+    When a message is received from a remote host using SMTP, this variable
+    contains that host's IP address. For locally non-SMTP submitted messages,
+    it is empty.
+
+$sender_host_authenticated
+
+    This variable contains the name (not the public name) of the authenticator
+    driver that successfully authenticated the client from which the message
+    was received. It is empty if there was no successful authentication. See
+    also $authenticated_id.
+
+$sender_host_dnssec
+
+    If an attempt to populate $sender_host_name has been made (by reference, 
+    hosts_lookup or otherwise) then this boolean will have been set true if,
+    and only if, the resolver library states that both the reverse and forward
+    DNS were authenticated data. At all other times, this variable is false.
+
+    It is likely that you will need to coerce DNSSEC support on in the resolver
+    library, by setting:
+
+    dns_dnssec_ok = 1
+
+    In addition, on Linux with glibc 2.31 or newer the resolver library will
+    default to stripping out a successful validation status. This will break a
+    previously working Exim installation. Provided that you do trust the
+    resolver (ie, is on localhost) you can tell glibc to pass through any
+    successful validation with a new option in /etc/resolv.conf:
+
+    options trust-ad
+
+    Exim does not perform DNSSEC validation itself, instead leaving that to a
+    validating resolver (e.g. unbound, or bind with suitable configuration).
+
+    If you have changed host_lookup_order so that "bydns" is not the first
+    mechanism in the list, then this variable will be false.
+
+    This requires that your system resolver library support EDNS0 (and that
+    DNSSEC flags exist in the system headers). If the resolver silently drops
+    all EDNS0 options, then this will have no effect. OpenBSD's asr resolver is
+    known to currently ignore EDNS0, documented in CAVEATS of asr_run(3).
+
+$sender_host_name
+
+    Tainted
+
+    When a message is received from a remote host, this variable contains the
+    host's name as obtained by looking up its IP address. For messages received
+    by other means, this variable is empty.
+
+    If the host name has not previously been looked up, a reference to
+    $sender_host_name triggers a lookup (for messages from remote hosts). A
+    looked up name is accepted only if it leads back to the original IP address
+    via a forward lookup. If either the reverse or the forward lookup fails to
+    find any data, or if the forward lookup does not yield the original IP
+    address, $sender_host_name remains empty, and $host_lookup_failed is set to
+    "1".
+
+    However, if either of the lookups cannot be completed (for example, there
+    is a DNS timeout), $host_lookup_deferred is set to "1", and
+    $host_lookup_failed remains set to "0".
+
+    Once $host_lookup_failed is set to "1", Exim does not try to look up the
+    host name again if there is a subsequent reference to $sender_host_name in
+    the same Exim process, but it does try again if $host_lookup_deferred is
+    set to "1".
+
+    Exim does not automatically look up every calling host's name. If you want
+    maximum efficiency, you should arrange your configuration so that it avoids
+    these lookups altogether. The lookup happens only if one or more of the
+    following are true:
+
+      o A string containing $sender_host_name is expanded.
+
+      o The calling host matches the list in host_lookup. In the default
+        configuration, this option is set to *, so it must be changed if
+        lookups are to be avoided. (In the code, the default for host_lookup is
+        unset.)
+
+      o Exim needs the host name in order to test an item in a host list. The
+        items that require this are described in sections 10.14 and 10.18.
+
+      o The calling host matches helo_try_verify_hosts or helo_verify_hosts. In
+        this case, the host name is required to compare with the name quoted in
+        any EHLO or HELO commands that the client issues.
+
+      o The remote host issues a EHLO or HELO command that quotes one of the
+        domains in helo_lookup_domains. The default value of this option is
+
+          helo_lookup_domains = @ : @[]
+
+        which causes a lookup if a remote host (incorrectly) gives the server's
+        name or IP address in an EHLO or HELO command.
+
+$sender_host_port
+
+    When a message is received from a remote host, this variable contains the
+    port number that was used on the remote host.
+
+$sender_ident
+
+    When a message is received from a remote host, this variable contains the
+    identification received in response to an RFC 1413 request. When a message
+    has been received locally, this variable contains the login name of the
+    user that called Exim.
+
+$sender_rate_xxx
+
+    A number of variables whose names begin $sender_rate_ are set as part of
+    the ratelimit ACL condition. Details are given in section 44.39.
+
+$sender_rcvhost
+
+    This is provided specifically for use in Received: headers. It starts with
+    either the verified host name (as obtained from a reverse DNS lookup) or,
+    if there is no verified host name, the IP address in square brackets. After
+    that there may be text in parentheses. When the first item is a verified
+    host name, the first thing in the parentheses is the IP address in square
+    brackets, followed by a colon and a port number if port logging is enabled.
+    When the first item is an IP address, the port is recorded as "port=xxxx"
+    inside the parentheses.
+
+    There may also be items of the form "helo=xxxx" if HELO or EHLO was used
+    and its argument was not identical to the real host name or IP address, and
+    "ident=xxxx" if an RFC 1413 ident string is available. If all three items
+    are present in the parentheses, a newline and tab are inserted into the
+    string, to improve the formatting of the Received: header.
+
+$sender_verify_failure
+
+    In an ACL, when a sender verification fails, this variable contains
+    information about the failure. The details are the same as for
+    $recipient_verify_failure.
+
+$sending_ip_address
+
+    This variable is set whenever an outgoing SMTP connection to another host
+    has been set up. It contains the IP address of the local interface that is
+    being used. This is useful if a host that has more than one IP address
+    wants to take on different personalities depending on which one is being
+    used. For incoming connections, see $received_ip_address.
+
+$sending_port
+
+    This variable is set whenever an outgoing SMTP connection to another host
+    has been set up. It contains the local port that is being used. For
+    incoming connections, see $received_port.
+
+$smtp_active_hostname
+
+    During an incoming SMTP session, this variable contains the value of the
+    active host name, as specified by the smtp_active_hostname option. The
+    value of $smtp_active_hostname is saved with any message that is received,
+    so its value can be consulted during routing and delivery.
+
+$smtp_command
+
+    Tainted
+
+    During the processing of an incoming SMTP command, this variable contains
+    the entire command. This makes it possible to distinguish between HELO and
+    EHLO in the HELO ACL, and also to distinguish between commands such as
+    these:
+
+    MAIL FROM:<>
+    MAIL FROM: <>
+
+    For a MAIL command, extra parameters such as SIZE can be inspected. For a
+    RCPT command, the address in $smtp_command is the original address before
+    any rewriting, whereas the values in $local_part and $domain are taken from
+    the address after SMTP-time rewriting.
+
+$smtp_command_argument
+
+    Tainted
+
+    While an ACL is running to check an SMTP command, this variable contains
+    the argument, that is, the text that follows the command name, with leading
+    white space removed. Following the introduction of $smtp_command, this
+    variable is somewhat redundant, but is retained for backwards
+    compatibility.
+
+$smtp_command_history
+
+    A comma-separated list (with no whitespace) of the most-recent SMTP
+    commands received, in time-order left to right. Only a limited number of
+    commands are remembered.
+
+$smtp_count_at_connection_start
+
+    This variable is set greater than zero only in processes spawned by the
+    Exim daemon for handling incoming SMTP connections. The name is
+    deliberately long, in order to emphasize what the contents are. When the
+    daemon accepts a new connection, it increments this variable. A copy of the
+    variable is passed to the child process that handles the connection, but
+    its value is fixed, and never changes. It is only an approximation of how
+    many incoming connections there actually are, because many other
+    connections may come and go while a single connection is being processed.
+    When a child process terminates, the daemon decrements its copy of the
+    variable.
+
+$sn0 - $sn9
+
+    These variables are copies of the values of the $n0 - $n9 accumulators that
+    were current at the end of the system filter file. This allows a system
+    filter file to set values that can be tested in users' filter files. For
+    example, a system filter could set a value indicating how likely it is that
+    a message is junk mail.
+
+$spam_score, $spam_score_int, $spam_bar, $spam_report, $spam_action
+
+    A number of variables whose names start with $spam are available when Exim
+    is compiled with the content-scanning extension. For details, see section
+    45.2.
+
+$spf_header_comment, $spf_received, $spf_result, $spf_result_guessed, 
+$spf_smtp_comment
+
+    These variables are only available if Exim is built with SPF support. For
+    details see section 58.4.
+
+$spool_directory
+
+    The name of Exim's spool directory.
+
+$spool_inodes
+
+    The number of free inodes in the disk partition where Exim's spool files
+    are being written. The value is recalculated whenever the variable is
+    referenced. If the relevant file system does not have the concept of
+    inodes, the value of is -1. See also the check_spool_inodes option.
+
+$spool_space
+
+    The amount of free space (as a number of kilobytes) in the disk partition
+    where Exim's spool files are being written. The value is recalculated
+    whenever the variable is referenced. If the operating system does not have
+    the ability to find the amount of free space (only true for experimental
+    systems), the space value is -1. For example, to check in an ACL that there
+    is at least 50 megabytes free on the spool, you could write:
+
+    condition = ${if > {$spool_space}{50000}}
+
+    See also the check_spool_space option.
+
+$thisaddress
+
+    This variable is set only during the processing of the foranyaddress
+    command in a filter file. Its use is explained in the description of that
+    command, which can be found in the separate document entitled Exim's
+    interfaces to mail filtering.
+
+$tls_in_bits
+
+    Contains an approximation of the TLS cipher's bit-strength on the inbound
+    connection; the meaning of this depends upon the TLS implementation used.
+    If TLS has not been negotiated, the value will be 0. The value of this is
+    automatically fed into the Cyrus SASL authenticator when acting as a
+    server, to specify the "external SSF" (a SASL term).
+
+    The deprecated $tls_bits variable refers to the inbound side except when
+    used in the context of an outbound SMTP delivery, when it refers to the
+    outbound.
+
+$tls_out_bits
+
+    Contains an approximation of the TLS cipher's bit-strength on an outbound
+    SMTP connection; the meaning of this depends upon the TLS implementation
+    used. If TLS has not been negotiated, the value will be 0.
+
+$tls_in_ourcert
+
+    This variable refers to the certificate presented to the peer of an inbound
+    connection when the message was received. It is only useful as the argument
+    of a certextract expansion item, md5, sha1 or sha256 operator, or a def
+    condition.
+
+    Note: Under versions of OpenSSL preceding 1.1.1, when a list of more than
+    one file is used for tls_certificate, this variable is not reliable. The
+    macro "_TLS_BAD_MULTICERT_IN_OURCERT" will be defined for those versions.
+
+$tls_in_peercert
+
+    This variable refers to the certificate presented by the peer of an inbound
+    connection when the message was received. It is only useful as the argument
+    of a certextract expansion item, md5, sha1 or sha256 operator, or a def
+    condition. If certificate verification fails it may refer to a failing
+    chain element which is not the leaf.
+
+$tls_out_ourcert
+
+    This variable refers to the certificate presented to the peer of an
+    outbound connection. It is only useful as the argument of a certextract
+    expansion item, md5, sha1 or sha256 operator, or a def condition.
+
+$tls_out_peercert
+
+    This variable refers to the certificate presented by the peer of an
+    outbound connection. It is only useful as the argument of a certextract
+    expansion item, md5, sha1 or sha256 operator, or a def condition. If
+    certificate verification fails it may refer to a failing chain element
+    which is not the leaf.
+
+$tls_in_certificate_verified
+
+    This variable is set to "1" if a TLS certificate was verified when the
+    message was received, and "0" otherwise.
+
+    The deprecated $tls_certificate_verified variable refers to the inbound
+    side except when used in the context of an outbound SMTP delivery, when it
+    refers to the outbound.
+
+$tls_out_certificate_verified
+
+    This variable is set to "1" if a TLS certificate was verified when an
+    outbound SMTP connection was made, and "0" otherwise.
+
+$tls_in_cipher
+
+    When a message is received from a remote host over an encrypted SMTP
+    connection, this variable is set to the cipher suite that was negotiated,
+    for example DES-CBC3-SHA. In other circumstances, in particular, for
+    message received over unencrypted connections, the variable is empty.
+    Testing $tls_in_cipher for emptiness is one way of distinguishing between
+    encrypted and non-encrypted connections during ACL processing.
+
+    The deprecated $tls_cipher variable is the same as $tls_in_cipher during
+    message reception, but in the context of an outward SMTP delivery taking
+    place via the smtp transport becomes the same as $tls_out_cipher.
+
+$tls_in_cipher_std
+
+    As above, but returning the RFC standard name for the cipher suite.
+
+$tls_out_cipher
+
+    This variable is cleared before any outgoing SMTP connection is made, and
+    then set to the outgoing cipher suite if one is negotiated. See chapter 43
+    for details of TLS support and chapter 30 for details of the smtp
+    transport.
+
+$tls_out_cipher_std
+
+    As above, but returning the RFC standard name for the cipher suite.
+
+$tls_out_dane
+
+    DANE active status. See section 43.18.
+
+$tls_in_ocsp
+
+    When a message is received from a remote client connection the result of
+    any OCSP request from the client is encoded in this variable:
+
+    0 OCSP proof was not requested (default value)
+    1 No response to request
+    2 Response not verified
+    3 Verification failed
+    4 Verification succeeded
+
+$tls_out_ocsp
+
+    When a message is sent to a remote host connection the result of any OCSP
+    request made is encoded in this variable. See $tls_in_ocsp for values.
+
+$tls_in_peerdn
+
+    When a message is received from a remote host over an encrypted SMTP
+    connection, and Exim is configured to request a certificate from the
+    client, the value of the Distinguished Name of the certificate is made
+    available in the $tls_in_peerdn during subsequent processing. If
+    certificate verification fails it may refer to a failing chain element
+    which is not the leaf.
+
+    The deprecated $tls_peerdn variable refers to the inbound side except when
+    used in the context of an outbound SMTP delivery, when it refers to the
+    outbound.
+
+$tls_out_peerdn
+
+    When a message is being delivered to a remote host over an encrypted SMTP
+    connection, and Exim is configured to request a certificate from the
+    server, the value of the Distinguished Name of the certificate is made
+    available in the $tls_out_peerdn during subsequent processing. If
+    certificate verification fails it may refer to a failing chain element
+    which is not the leaf.
+
+$tls_in_resumption, $tls_out_resumption
+
+    Observability for TLS session resumption. See 43.17 for details.
+
+$tls_in_sni
+
+    Tainted
+
+    When a TLS session is being established, if the client sends the Server
+    Name Indication extension, the value will be placed in this variable. If
+    the variable appears in tls_certificate then this option and some others,
+    described in 43.12, will be re-expanded early in the TLS session, to permit
+    a different certificate to be presented (and optionally a different key to
+    be used) to the client, based upon the value of the SNI extension.
+
+    The deprecated $tls_sni variable refers to the inbound side except when
+    used in the context of an outbound SMTP delivery, when it refers to the
+    outbound.
+
+$tls_out_sni
+
+    During outbound SMTP deliveries, this variable reflects the value of the 
+    tls_sni option on the transport.
+
+$tls_out_tlsa_usage
+
+    Bitfield of TLSA record types found. See section 43.18.
+
+$tls_in_ver
+
+    When a message is received from a remote host over an encrypted SMTP
+    connection this variable is set to the protocol version, eg TLS1.2.
+
+$tls_out_ver
+
+    When a message is being delivered to a remote host over an encrypted SMTP
+    connection this variable is set to the protocol version.
+
+$tod_bsdinbox
+
+    The time of day and the date, in the format required for BSD-style mailbox
+    files, for example: Thu Oct 17 17:14:09 1995.
+
+$tod_epoch
+
+    The time and date as a number of seconds since the start of the Unix epoch.
+
+$tod_epoch_l
+
+    The time and date as a number of microseconds since the start of the Unix
+    epoch.
+
+$tod_full
+
+    A full version of the time and date, for example: Wed, 16 Oct 1995 09:51:40
+    +0100. The timezone is always given as a numerical offset from UTC, with
+    positive values used for timezones that are ahead (east) of UTC, and
+    negative values for those that are behind (west).
+
+$tod_log
+
+    The time and date in the format used for writing Exim's log files, for
+    example: 1995-10-12 15:32:29, but without a timezone.
+
+$tod_logfile
+
+    This variable contains the date in the format yyyymmdd. This is the format
+    that is used for datestamping log files when log_file_path contains the
+    "%D" flag.
+
+$tod_zone
+
+    This variable contains the numerical value of the local timezone, for
+    example: -0500.
+
+$tod_zulu
+
+    This variable contains the UTC date and time in "Zulu" format, as specified
+    by ISO 8601, for example: 20030221154023Z.
+
+$transport_name
+
+    During the running of a transport, this variable contains its name.
+
+$value
+
+    This variable contains the result of an expansion lookup, extraction
+    operation, or external command, as described above. It is also used during
+    a reduce expansion.
+
+$verify_mode
+
+    While a router or transport is being run in verify mode or for cutthrough
+    delivery, contains "S" for sender-verification or "R" for
+    recipient-verification. Otherwise, empty.
+
+$version_number
+
+    The version number of Exim. Same as $exim_version, may be overridden by the
+    exim_version main config option.
+
+$warn_message_delay
+
+    This variable is set only during the creation of a message warning about a
+    delivery delay. Details of its use are explained in section 50.2.
+
+$warn_message_recipients
+
+    This variable is set only during the creation of a message warning about a
+    delivery delay. Details of its use are explained in section 50.2.
+
+
+
+===============================================================================
+12. EMBEDDED PERL
+
+Exim can be built to include an embedded Perl interpreter. When this is done,
+Perl subroutines can be called as part of the string expansion process. To make
+use of the Perl support, you need version 5.004 or later of Perl installed on
+your system. To include the embedded interpreter in the Exim binary, include
+the line
+
+EXIM_PERL = perl.o
+
+in your Local/Makefile and then build Exim in the normal way.
+
+
+12.1 Setting up so Perl can be used
+-----------------------------------
+
+Access to Perl subroutines is via a global configuration option called 
+perl_startup and an expansion string operator ${perl ...}. If there is no 
+perl_startup option in the Exim configuration file then no Perl interpreter is
+started and there is almost no overhead for Exim (since none of the Perl
+library will be paged in unless used). If there is a perl_startup option then
+the associated value is taken to be Perl code which is executed in a newly
+created Perl interpreter.
+
+The value of perl_startup is not expanded in the Exim sense, so you do not need
+backslashes before any characters to escape special meanings. The option should
+usually be something like
+
+perl_startup = do '/etc/exim.pl'
+
+where /etc/exim.pl is Perl code which defines any subroutines you want to use
+from Exim. Exim can be configured either to start up a Perl interpreter as soon
+as it is entered, or to wait until the first time it is needed. Starting the
+interpreter at the beginning ensures that it is done while Exim still has its
+setuid privilege, but can impose an unnecessary overhead if Perl is not in fact
+used in a particular run. Also, note that this does not mean that Exim is
+necessarily running as root when Perl is called at a later time. By default,
+the interpreter is started only when it is needed, but this can be changed in
+two ways:
+
+  * Setting perl_at_start (a boolean option) in the configuration requests a
+    startup when Exim is entered.
+
+  * The command line option -ps also requests a startup when Exim is entered,
+    overriding the setting of perl_at_start.
+
+There is also a command line option -pd (for delay) which suppresses the
+initial startup, even if perl_at_start is set.
+
+  * To provide more security executing Perl code via the embedded Perl
+    interpreter, the perl_taintmode option can be set. This enables the taint
+    mode of the Perl interpreter. You are encouraged to set this option to a
+    true value. To avoid breaking existing installations, it defaults to false.
+
+    Note: This is entirely separate from Exim's tainted-data tracking.
+
+
+12.2 Calling Perl subroutines
+-----------------------------
+
+When the configuration file includes a perl_startup option you can make use of
+the string expansion item to call the Perl subroutines that are defined by the 
+perl_startup code. The operator is used in any of the following forms:
+
+${perl{foo}}
+${perl{foo}{argument}}
+${perl{foo}{argument1}{argument2} ... }
+
+which calls the subroutine foo with the given arguments. A maximum of eight
+arguments may be passed. Passing more than this results in an expansion failure
+with an error message of the form
+
+Too many arguments passed to Perl subroutine "foo" (max is 8)
+
+The return value of the Perl subroutine is evaluated in a scalar context before
+it is passed back to Exim to be inserted into the expanded string. If the
+return value is undef, the expansion is forced to fail in the same way as an
+explicit "fail" on an if or lookup item. If the subroutine aborts by obeying
+Perl's die function, the expansion fails with the error message that was passed
+to die.
+
+
+12.3 Calling Exim functions from Perl
+-------------------------------------
+
+Within any Perl code called from Exim, the function Exim::expand_string() is
+available to call back into Exim's string expansion function. For example, the
+Perl code
+
+my $lp = Exim::expand_string('$local_part');
+
+makes the current Exim $local_part available in the Perl variable $lp. Note
+those are single quotes and not double quotes to protect against $local_part
+being interpolated as a Perl variable.
+
+If the string expansion is forced to fail by a "fail" item, the result of 
+Exim::expand_string() is undef. If there is a syntax error in the expansion
+string, the Perl call from the original expansion string fails with an
+appropriate error message, in the same way as if die were used.
+
+Two other Exim functions are available for use from within Perl code. 
+Exim::debug_write() writes a string to the standard error stream if Exim's
+debugging is enabled. If you want a newline at the end, you must supply it. 
+Exim::log_write() writes a string to Exim's main log, adding a leading
+timestamp. In this case, you should not supply a terminating newline.
+
+
+12.4 Use of standard output and error by Perl
+---------------------------------------------
+
+You should not write to the standard error or output streams from within your
+Perl code, as it is not defined how these are set up. In versions of Exim
+before 4.50, it is possible for the standard output or error to refer to the
+SMTP connection during message reception via the daemon. Writing to this stream
+is certain to cause chaos. From Exim 4.50 onwards, the standard output and
+error streams are connected to /dev/null in the daemon. The chaos is avoided,
+but the output is lost.
+
+The Perl warn statement writes to the standard error stream by default. Calls
+to warn may be embedded in Perl modules that you use, but over which you have
+no control. When Exim starts up the Perl interpreter, it arranges for output
+from the warn statement to be written to the Exim main log. You can change this
+by including appropriate Perl magic somewhere in your Perl code. For example,
+to discard warn output completely, you need this:
+
+$SIG{__WARN__} = sub { };
+
+Whenever a warn is obeyed, the anonymous subroutine is called. In this example,
+the code for the subroutine is empty, so it does nothing, but you can include
+any Perl code that you like. The text of the warn message is passed as the
+first subroutine argument.
+
+
+
+===============================================================================
+13. STARTING THE DAEMON AND THE USE OF NETWORK INTERFACES
+
+A host that is connected to a TCP/IP network may have one or more physical
+hardware network interfaces. Each of these interfaces may be configured as one
+or more "logical" interfaces, which are the entities that a program actually
+works with. Each of these logical interfaces is associated with an IP address.
+In addition, TCP/IP software supports "loopback" interfaces (127.0.0.1 in IPv4
+and ::1 in IPv6), which do not use any physical hardware. Exim requires
+knowledge about the host's interfaces for use in three different circumstances:
+
+ 1. When a listening daemon is started, Exim needs to know which interfaces and
+    ports to listen on.
+
+ 2. When Exim is routing an address, it needs to know which IP addresses are
+    associated with local interfaces. This is required for the correct
+    processing of MX lists by removing the local host and others with the same
+    or higher priority values. Also, Exim needs to detect cases when an address
+    is routed to an IP address that in fact belongs to the local host. Unless
+    the self router option or the allow_localhost option of the smtp transport
+    is set (as appropriate), this is treated as an error situation.
+
+ 3. When Exim connects to a remote host, it may need to know which interface to
+    use for the outgoing connection.
+
+Exim's default behaviour is likely to be appropriate in the vast majority of
+cases. If your host has only one interface, and you want all its IP addresses
+to be treated in the same way, and you are using only the standard SMTP port,
+you should not need to take any special action. The rest of this chapter does
+not apply to you.
+
+In a more complicated situation you may want to listen only on certain
+interfaces, or on different ports, and for this reason there are a number of
+options that can be used to influence Exim's behaviour. The rest of this
+chapter describes how they operate.
+
+When a message is received over TCP/IP, the interface and port that were
+actually used are set in $received_ip_address and $received_port.
+
+
+13.1 Starting a listening daemon
+--------------------------------
+
+When a listening daemon is started (by means of the -bd command line option),
+the interfaces and ports on which it listens are controlled by the following
+options:
+
+  * daemon_smtp_ports contains a list of default ports or service names. (For
+    backward compatibility, this option can also be specified in the singular.)
+
+  * local_interfaces contains list of interface IP addresses on which to
+    listen. Each item may optionally also specify a port.
+
+The default list separator in both cases is a colon, but this can be changed as
+described in section 6.21. When IPv6 addresses are involved, it is usually best
+to change the separator to avoid having to double all the colons. For example:
+
+local_interfaces = <; 127.0.0.1 ; \
+                      192.168.23.65 ; \
+                      ::1 ; \
+                      3ffe:ffff:836f::fe86:a061
+
+There are two different formats for specifying a port along with an IP address
+in local_interfaces:
+
+ 1. The port is added onto the address with a dot separator. For example, to
+    listen on port 1234 on two different IP addresses:
+
+    local_interfaces = <; 192.168.23.65.1234 ; \
+                          3ffe:ffff:836f::fe86:a061.1234
+
+ 2. The IP address is enclosed in square brackets, and the port is added with a
+    colon separator, for example:
+
+    local_interfaces = <; [192.168.23.65]:1234 ; \
+                          [3ffe:ffff:836f::fe86:a061]:1234
+
+When a port is not specified, the value of daemon_smtp_ports is used. The
+default setting contains just one port:
+
+daemon_smtp_ports = smtp
+
+If more than one port is listed, each interface that does not have its own port
+specified listens on all of them. Ports that are listed in daemon_smtp_ports
+can be identified either by name (defined in /etc/services) or by number.
+However, when ports are given with individual IP addresses in local_interfaces,
+only numbers (not names) can be used.
+
+
+13.2 Special IP listening addresses
+-----------------------------------
+
+The addresses 0.0.0.0 and ::0 are treated specially. They are interpreted as
+"all IPv4 interfaces" and "all IPv6 interfaces", respectively. In each case,
+Exim tells the TCP/IP stack to "listen on all IPvx interfaces" instead of
+setting up separate listening sockets for each interface. The default value of 
+local_interfaces is
+
+local_interfaces = 0.0.0.0
+
+when Exim is built without IPv6 support; otherwise it is:
+
+local_interfaces = <; ::0 ; 0.0.0.0
+
+Thus, by default, Exim listens on all available interfaces, on the SMTP port.
+
+
+13.3 Overriding local_interfaces and daemon_smtp_ports
+------------------------------------------------------
+
+The -oX command line option can be used to override the values of 
+daemon_smtp_ports and/or local_interfaces for a particular daemon instance.
+Another way of doing this would be to use macros and the -D option. However, 
+-oX can be used by any admin user, whereas modification of the runtime
+configuration by -D is allowed only when the caller is root or exim.
+
+The value of -oX is a list of items. The default colon separator can be changed
+in the usual way (6.21) if required. If there are any items that do not contain
+dots or colons (that is, are not IP addresses), the value of daemon_smtp_ports
+is replaced by the list of those items. If there are any items that do contain
+dots or colons, the value of local_interfaces is replaced by those items. Thus,
+for example,
+
+-oX 1225
+
+overrides daemon_smtp_ports, but leaves local_interfaces unchanged, whereas
+
+-oX 192.168.34.5.1125
+
+overrides local_interfaces, leaving daemon_smtp_ports unchanged. (However,
+since local_interfaces now contains no items without ports, the value of 
+daemon_smtp_ports is no longer relevant in this example.)
+
+
+13.4 Support for the submissions (aka SSMTP or SMTPS) protocol
+--------------------------------------------------------------
+
+Exim supports the use of TLS-on-connect, used by mail clients in the
+"submissions" protocol, historically also known as SMTPS or SSMTP. For some
+years, IETF Standards Track documents only blessed the STARTTLS-based
+Submission service (port 587) while common practice was to support the same
+feature set on port 465, but using TLS-on-connect. If your installation needs
+to provide service to mail clients (Mail User Agents, MUAs) then you should
+provide service on both the 587 and the 465 TCP ports.
+
+If the tls_on_connect_ports option is set to a list of port numbers or service
+names, connections to those ports must first establish TLS, before proceeding
+to the application layer use of the SMTP protocol.
+
+The common use of this option is expected to be
+
+tls_on_connect_ports = 465
+
+per RFC 8314. There is also a command line option -tls-on-connect, which forces
+all ports to behave in this way when a daemon is started.
+
+Warning: Setting tls_on_connect_ports does not of itself cause the daemon to
+listen on those ports. You must still specify them in daemon_smtp_ports, 
+local_interfaces, or the -oX option. (This is because tls_on_connect_ports
+applies to inetd connections as well as to connections via the daemon.)
+
+
+13.5 IPv6 address scopes
+------------------------
+
+IPv6 addresses have "scopes", and a host with multiple hardware interfaces can,
+in principle, have the same link-local IPv6 address on different interfaces.
+Thus, additional information is needed, over and above the IP address, to
+distinguish individual interfaces. A convention of using a percent sign
+followed by something (often the interface name) has been adopted in some
+cases, leading to addresses like this:
+
+fe80::202:b3ff:fe03:45c1%eth0
+
+To accommodate this usage, a percent sign followed by an arbitrary string is
+allowed at the end of an IPv6 address. By default, Exim calls getaddrinfo() to
+convert a textual IPv6 address for actual use. This function recognizes the
+percent convention in operating systems that support it, and it processes the
+address appropriately. Unfortunately, some older libraries have problems with
+getaddrinfo(). If
+
+IPV6_USE_INET_PTON=yes
+
+is set in Local/Makefile (or an OS-dependent Makefile) when Exim is built, Exim
+uses inet_pton() to convert a textual IPv6 address for actual use, instead of
+getaddrinfo(). (Before version 4.14, it always used this function.) Of course,
+this means that the additional functionality of getaddrinfo() - recognizing
+scoped addresses - is lost.
+
+
+13.6 Disabling IPv6
+-------------------
+
+Sometimes it happens that an Exim binary that was compiled with IPv6 support is
+run on a host whose kernel does not support IPv6. The binary will fall back to
+using IPv4, but it may waste resources looking up AAAA records, and trying to
+connect to IPv6 addresses, causing delays to mail delivery. If you set the 
+disable_ipv6 option true, even if the Exim binary has IPv6 support, no IPv6
+activities take place. AAAA records are never looked up, and any IPv6 addresses
+that are listed in local_interfaces, data for the manualroute router, etc. are
+ignored. If IP literals are enabled, the ipliteral router declines to handle
+IPv6 literal addresses.
+
+On the other hand, when IPv6 is in use, there may be times when you want to
+disable it for certain hosts or domains. You can use the dns_ipv4_lookup option
+to globally suppress the lookup of AAAA records for specified domains, and you
+can use the ignore_target_hosts generic router option to ignore IPv6 addresses
+in an individual router.
+
+
+13.7 Examples of starting a listening daemon
+--------------------------------------------
+
+The default case in an IPv6 environment is
+
+daemon_smtp_ports = smtp
+local_interfaces = <; ::0 ; 0.0.0.0
+
+This specifies listening on the smtp port on all IPv6 and IPv4 interfaces.
+Either one or two sockets may be used, depending on the characteristics of the
+TCP/IP stack. (This is complicated and messy; for more information, read the
+comments in the daemon.c source file.)
+
+To specify listening on ports 25 and 26 on all interfaces:
+
+daemon_smtp_ports = 25 : 26
+
+(leaving local_interfaces at the default setting) or, more explicitly:
+
+local_interfaces = <; ::0.25     ; ::0.26 \
+                      0.0.0.0.25 ; 0.0.0.0.26
+
+To listen on the default port on all IPv4 interfaces, and on port 26 on the
+IPv4 loopback address only:
+
+local_interfaces = 0.0.0.0 : 127.0.0.1.26
+
+To specify listening on the default port on specific interfaces only:
+
+local_interfaces = 10.0.0.67 : 192.168.34.67
+
+Warning: Such a setting excludes listening on the loopback interfaces.
+
+
+13.8 Recognizing the local host
+-------------------------------
+
+The local_interfaces option is also used when Exim needs to determine whether
+or not an IP address refers to the local host. That is, the IP addresses of all
+the interfaces on which a daemon is listening are always treated as local.
+
+For this usage, port numbers in local_interfaces are ignored. If either of the
+items 0.0.0.0 or ::0 are encountered, Exim gets a complete list of available
+interfaces from the operating system, and extracts the relevant (that is, IPv4
+or IPv6) addresses to use for checking.
+
+Some systems set up large numbers of virtual interfaces in order to provide
+many virtual web servers. In this situation, you may want to listen for email
+on only a few of the available interfaces, but nevertheless treat all
+interfaces as local when routing. You can do this by setting 
+extra_local_interfaces to a list of IP addresses, possibly including the "all"
+wildcard values. These addresses are recognized as local, but are not used for
+listening. Consider this example:
+
+local_interfaces = <; 127.0.0.1 ; ::1 ; \
+                      192.168.53.235 ; \
+                      3ffe:2101:12:1:a00:20ff:fe86:a061
+
+extra_local_interfaces = <; ::0 ; 0.0.0.0
+
+The daemon listens on the loopback interfaces and just one IPv4 and one IPv6
+address, but all available interface addresses are treated as local when Exim
+is routing.
+
+In some environments the local host name may be in an MX list, but with an IP
+address that is not assigned to any local interface. In other cases it may be
+desirable to treat other host names as if they referred to the local host. Both
+these cases can be handled by setting the hosts_treat_as_local option. This
+contains host names rather than IP addresses. When a host is referenced during
+routing, either via an MX record or directly, it is treated as the local host
+if its name matches hosts_treat_as_local, or if any of its IP addresses match 
+local_interfaces or extra_local_interfaces.
+
+
+13.9 Delivering to a remote host
+--------------------------------
+
+Delivery to a remote host is handled by the smtp transport. By default, it
+allows the system's TCP/IP functions to choose which interface to use (if there
+is more than one) when connecting to a remote host. However, the interface
+option can be set to specify which interface is used. See the description of
+the smtp transport in chapter 30 for more details.
+
+
+
+===============================================================================
+14. MAIN CONFIGURATION
+
+The first part of the runtime configuration file contains three types of item:
+
+  * Macro definitions: These lines start with an upper case letter. See section
+    6.4 for details of macro processing.
+
+  * Named list definitions: These lines start with one of the words
+    "domainlist", "hostlist", "addresslist", or "localpartlist". Their use is
+    described in section 10.6.
+
+  * Main configuration settings: Each setting occupies one line of the file
+    (with possible continuations). If any setting is preceded by the word
+    "hide", the -bP command line option displays its value to admin users only.
+    See section 6.11 for a description of the syntax of these option settings.
+
+This chapter specifies all the main configuration options, along with their
+types and default values. For ease of finding a particular option, they appear
+in alphabetical order in section 14.23 below. However, because there are now so
+many options, they are first listed briefly in functional groups, as an aid to
+finding the name of the option you are looking for. Some options are listed in
+more than one group.
+
+
+14.1 Miscellaneous
+------------------
+
+add_environment       environment variables
+bi_command            to run for -bi command line option
+debug_store           do extra internal checks
+disable_ipv6          do no IPv6 processing
+keep_environment      environment variables
+keep_malformed        for broken files - should not happen
+localhost_number      for unique message ids in clusters
+message_body_newlines retain newlines in $message_body
+message_body_visible  how much to show in $message_body
+mua_wrapper           run in "MUA wrapper" mode
+print_topbitchars     top-bit characters are printing
+spool_wireformat      use wire-format spool data files when possible
+timezone              force time zone
+
+
+14.2 Exim parameters
+--------------------
+
+exim_group            override compiled-in value
+exim_path             override compiled-in value
+exim_user             override compiled-in value
+primary_hostname      default from uname()
+split_spool_directory use multiple directories
+spool_directory       override compiled-in value
+
+
+14.3 Privilege controls
+-----------------------
+
+admin_groups                     groups that are Exim admin users
+commandline_checks_require_admin require admin for various checks
+deliver_drop_privilege           drop root for delivery processes
+local_from_check                 insert Sender: if necessary
+local_from_prefix                for testing From: for local sender
+local_from_suffix                for testing From: for local sender
+local_sender_retain              keep Sender: from untrusted user
+never_users                      do not run deliveries as these
+prod_requires_admin              forced delivery requires admin user
+queue_list_requires_admin        queue listing requires admin user
+trusted_groups                   groups that are trusted
+trusted_users                    users that are trusted
+
+
+14.4 Logging
+------------
+
+event_action           custom logging
+hosts_connection_nolog exemption from connect logging
+log_file_path          override compiled-in value
+log_selector           set/unset optional logging
+log_timezone           add timezone to log lines
+message_logs           create per-message logs
+preserve_message_logs  after message completion
+process_log_path       for SIGUSR1 and exiwhat
+slow_lookup_log        control logging of slow DNS lookups
+syslog_duplication     controls duplicate log lines on syslog
+syslog_facility        set syslog "facility" field
+syslog_pid             pid in syslog lines
+syslog_processname     set syslog "ident" field
+syslog_timestamp       timestamp syslog lines
+write_rejectlog        control use of message log
+
+
+14.5 Frozen messages
+--------------------
+
+auto_thaw            sets time for retrying frozen messages
+freeze_tell          send message when freezing
+move_frozen_messages to another directory
+timeout_frozen_after keep frozen messages only so long
+
+
+14.6 Data lookups
+-----------------
+
+ibase_servers        InterBase servers
+ldap_ca_cert_dir     dir of CA certs to verify LDAP server's
+ldap_ca_cert_file    file of CA certs to verify LDAP server's
+ldap_cert_file       client cert file for LDAP
+ldap_cert_key        client key file for LDAP
+ldap_cipher_suite    TLS negotiation preference control
+ldap_default_servers used if no server in query
+ldap_require_cert    action to take without LDAP server cert
+ldap_start_tls       require TLS within LDAP
+ldap_version         set protocol version
+lookup_open_max      lookup files held open
+mysql_servers        default MySQL servers
+oracle_servers       Oracle servers
+pgsql_servers        default PostgreSQL servers
+sqlite_lock_timeout  as it says
+
+
+14.7 Message ids
+----------------
+
+message_id_header_domain used to build Message-ID: header
+message_id_header_text   ditto
+
+
+14.8 Embedded Perl Startup
+--------------------------
+
+perl_at_start  always start the interpreter
+perl_startup   code to obey when starting Perl
+perl_taintmode enable taint mode in Perl
+
+
+14.9 Daemon
+-----------
+
+daemon_smtp_ports      default ports
+daemon_startup_retries number of times to retry
+daemon_startup_sleep   time to sleep between tries
+extra_local_interfaces not necessarily listened on
+local_interfaces       on which to listen, with optional ports
+notifier_socket        override compiled-in value
+pid_file_path          override compiled-in value
+queue_run_max          maximum simultaneous queue runners
+smtp_backlog_monitor   level to log listen backlog
+
+
+14.10 Resource control
+----------------------
+
+check_log_inodes                 before accepting a message
+check_log_space                  before accepting a message
+check_spool_inodes               before accepting a message
+check_spool_space                before accepting a message
+deliver_queue_load_max           no queue deliveries if load high
+queue_only_load                  queue incoming if load high
+queue_only_load_latch            don't re-evaluate load for each message
+queue_run_max                    maximum simultaneous queue runners
+remote_max_parallel              parallel SMTP delivery per message
+smtp_accept_max                  simultaneous incoming connections
+smtp_accept_max_nonmail          non-mail commands
+smtp_accept_max_nonmail_hosts    hosts to which the limit applies
+smtp_accept_max_per_connection   messages per connection
+smtp_accept_max_per_host         connections from one host
+smtp_accept_queue                queue mail if more connections
+smtp_accept_queue_per_connection queue if more messages per connection
+smtp_accept_reserve              only reserve hosts if more connections
+smtp_check_spool_space           from SIZE on MAIL command
+smtp_connect_backlog             passed to TCP/IP stack
+smtp_load_reserve                SMTP from reserved hosts if load high
+smtp_reserve_hosts               these are the reserve hosts
+
+
+14.11 Policy controls
+---------------------
+
+acl_not_smtp              ACL for non-SMTP messages
+acl_not_smtp_mime         ACL for non-SMTP MIME parts
+acl_not_smtp_start        ACL for start of non-SMTP message
+acl_smtp_auth             ACL for AUTH
+acl_smtp_connect          ACL for connection
+acl_smtp_data             ACL for DATA
+acl_smtp_data_prdr        ACL for DATA, per-recipient
+acl_smtp_dkim             ACL for DKIM verification
+acl_smtp_etrn             ACL for ETRN
+acl_smtp_expn             ACL for EXPN
+acl_smtp_helo             ACL for EHLO or HELO
+acl_smtp_mail             ACL for MAIL
+acl_smtp_mailauth         ACL for AUTH on MAIL command
+acl_smtp_mime             ACL for MIME parts
+acl_smtp_notquit          ACL for non-QUIT terminations
+acl_smtp_predata          ACL for start of data
+acl_smtp_quit             ACL for QUIT
+acl_smtp_rcpt             ACL for RCPT
+acl_smtp_starttls         ACL for STARTTLS
+acl_smtp_vrfy             ACL for VRFY
+av_scanner                specify virus scanner
+check_rfc2047_length      check length of RFC 2047 "encoded words"
+dns_cname_loops           follow CNAMEs returned by resolver
+dns_csa_search_limit      control CSA parent search depth
+dns_csa_use_reverse       en/disable CSA IP reverse search
+header_maxsize            total size of message header
+header_line_maxsize       individual header line limit
+helo_accept_junk_hosts    allow syntactic junk from these hosts
+helo_allow_chars          allow illegal chars in HELO names
+helo_lookup_domains       lookup hostname for these HELO names
+helo_try_verify_hosts     HELO soft-checked for these hosts
+helo_verify_hosts         HELO hard-checked for these hosts
+host_lookup               host name looked up for these hosts
+host_lookup_order         order of DNS and local name lookups
+hosts_proxy               use proxy protocol for these hosts
+host_reject_connection    reject connection from these hosts
+hosts_treat_as_local      useful in some cluster configurations
+local_scan_timeout        timeout for local_scan()
+message_size_limit        for all messages
+percent_hack_domains      recognize %-hack for these domains
+proxy_protocol_timeout    timeout for proxy protocol negotiation
+spamd_address             set interface to SpamAssassin
+strict_acl_vars           object to unset ACL variables
+spf_smtp_comment_template template for $spf_smtp_comment
+
+
+14.12 Callout cache
+-------------------
+
+callout_domain_negative_expire timeout for negative domain cache item
+callout_domain_positive_expire timeout for positive domain cache item
+callout_negative_expire        timeout for negative address cache item
+callout_positive_expire        timeout for positive address cache item
+callout_random_local_part      string to use for "random" testing
+
+
+14.13 TLS
+---------
+
+gnutls_compat_mode       use GnuTLS compatibility mode
+gnutls_allow_auto_pkcs11 allow GnuTLS to autoload PKCS11 modules
+hosts_require_alpn       mandatory ALPN
+hosts_require_helo       mandatory HELO/EHLO
+openssl_options          adjust OpenSSL compatibility options
+tls_advertise_hosts      advertise TLS to these hosts
+tls_alpn                 acceptable protocol names
+tls_certificate          location of server certificate
+tls_crl                  certificate revocation list
+tls_dh_max_bits          clamp D-H bit count suggestion
+tls_dhparam              DH parameters for server
+tls_eccurve              EC curve selection for server
+tls_ocsp_file            location of server certificate status proof
+tls_on_connect_ports     specify SSMTP (SMTPS) ports
+tls_privatekey           location of server private key
+tls_remember_esmtp       don't reset after starting TLS
+tls_require_ciphers      specify acceptable ciphers
+tls_try_verify_hosts     try to verify client certificate
+tls_verify_certificates  expected client certificates
+tls_verify_hosts         insist on client certificate verify
+
+
+14.14 Local user handling
+-------------------------
+
+finduser_retries    useful in NIS environments
+gecos_name          used when creating Sender:
+gecos_pattern       ditto
+max_username_length for systems that truncate
+unknown_login       used when no login name found
+unknown_username    ditto
+uucp_from_pattern   for recognizing "From " lines
+uucp_from_sender    ditto
+
+
+14.15 All incoming messages (SMTP and non-SMTP)
+-----------------------------------------------
+
+header_maxsize        total size of message header
+header_line_maxsize   individual header line limit
+message_size_limit    applies to all messages
+percent_hack_domains  recognize %-hack for these domains
+received_header_text  expanded to make Received:
+received_headers_max  for mail loop detection
+recipients_max        limit per message
+recipients_max_reject permanently reject excess recipients
+
+
+14.16 Non-SMTP incoming messages
+--------------------------------
+
+receive_timeout for non-SMTP messages
+
+
+14.17 Incoming SMTP messages
+----------------------------
+
+See also the Policy controls section above.
+
+dkim_verify_hashes               DKIM hash methods accepted for signatures
+dkim_verify_keytypes             DKIM key types accepted for signatures
+dkim_verify_min_keysizes         DKIM key sizes accepted for signatures
+dkim_verify_signers              DKIM domains for which DKIM ACL is run
+dmarc_forensic_sender            DMARC sender for report messages
+dmarc_history_file               DMARC results log
+dmarc_tld_file                   DMARC toplevel domains file
+host_lookup                      host name looked up for these hosts
+host_lookup_order                order of DNS and local name lookups
+recipient_unqualified_hosts      may send unqualified recipients
+rfc1413_hosts                    make ident calls to these hosts
+rfc1413_query_timeout            zero disables ident calls
+sender_unqualified_hosts         may send unqualified senders
+smtp_accept_keepalive            some TCP/IP magic
+smtp_accept_max                  simultaneous incoming connections
+smtp_accept_max_nonmail          non-mail commands
+smtp_accept_max_nonmail_hosts    hosts to which the limit applies
+smtp_accept_max_per_connection   messages per connection
+smtp_accept_max_per_host         connections from one host
+smtp_accept_queue                queue mail if more connections
+smtp_accept_queue_per_connection queue if more messages per connection
+smtp_accept_reserve              only reserve hosts if more connections
+smtp_active_hostname             host name to use in messages
+smtp_banner                      text for welcome banner
+smtp_check_spool_space           from SIZE on MAIL command
+smtp_connect_backlog             passed to TCP/IP stack
+smtp_enforce_sync                of SMTP command/responses
+smtp_etrn_command                what to run for ETRN
+smtp_etrn_serialize              only one at once
+smtp_load_reserve                only reserve hosts if this load
+smtp_max_unknown_commands        before dropping connection
+smtp_ratelimit_hosts             apply ratelimiting to these hosts
+smtp_ratelimit_mail              ratelimit for MAIL commands
+smtp_ratelimit_rcpt              ratelimit for RCPT commands
+smtp_receive_timeout             per command or data line
+smtp_reserve_hosts               these are the reserve hosts
+smtp_return_error_details        give detail on rejections
+
+
+14.18 SMTP extensions
+---------------------
+
+accept_8bitmime                    advertise 8BITMIME
+auth_advertise_hosts               advertise AUTH to these hosts
+chunking_advertise_hosts           advertise CHUNKING to these hosts
+dsn_advertise_hosts                advertise DSN extensions to these hosts
+ignore_fromline_hosts              allow "From " from these hosts
+ignore_fromline_local              allow "From " from local SMTP
+pipelining_advertise_hosts         advertise pipelining to these hosts
+pipelining_connect_advertise_hosts advertise pipelining to these hosts
+prdr_enable                        advertise PRDR to all hosts
+smtputf8_advertise_hosts           advertise SMTPUTF8 to these hosts
+tls_advertise_hosts                advertise TLS to these hosts
+
+
+14.19 Processing messages
+-------------------------
+
+allow_domain_literals              recognize domain literal syntax
+allow_mx_to_ip                     allow MX to point to IP address
+allow_utf8_domains                 in addresses
+check_rfc2047_length               check length of RFC 2047 "encoded words"
+delivery_date_remove               from incoming messages
+envelope_to_remove                 from incoming messages
+extract_addresses_remove_arguments affects -t processing
+headers_charset                    default for translations
+qualify_domain                     default for senders
+qualify_recipient                  default for recipients
+return_path_remove                 from incoming messages
+strip_excess_angle_brackets        in addresses
+strip_trailing_dot                 at end of addresses
+untrusted_set_sender               untrusted can set envelope sender
+
+
+14.20 System filter
+-------------------
+
+system_filter                     locate system filter
+system_filter_directory_transport transport for delivery to a directory
+system_filter_file_transport      transport for delivery to a file
+system_filter_group               group for filter running
+system_filter_pipe_transport      transport for delivery to a pipe
+system_filter_reply_transport     transport for autoreply delivery
+system_filter_user                user for filter running
+
+
+14.21 Routing and delivery
+--------------------------
+
+disable_ipv6             do no IPv6 processing
+dns_again_means_nonexist for broken domains
+dns_check_names_pattern  pre-DNS syntax check
+dns_dnssec_ok            parameter for resolver
+dns_ipv4_lookup          only v4 lookup for these domains
+dns_retrans              parameter for resolver
+dns_retry                parameter for resolver
+dns_trust_aa             DNS zones trusted as authentic
+dns_use_edns0            parameter for resolver
+hold_domains             hold delivery for these domains
+local_interfaces         for routing checks
+queue_domains            no immediate delivery for these
+queue_fast_ramp          parallel delivery with 2-phase queue run
+queue_only               no immediate delivery at all
+queue_only_file          no immediate delivery if file exists
+queue_only_load          no immediate delivery if load is high
+queue_only_load_latch    don't re-evaluate load for each message
+queue_only_override      allow command line to override
+queue_run_in_order       order of arrival
+queue_run_max            of simultaneous queue runners
+queue_smtp_domains       no immediate SMTP delivery for these
+remote_max_parallel      parallel SMTP delivery per message
+remote_sort_domains      order of remote deliveries
+retry_data_expire        timeout for retry data
+retry_interval_max       safety net for retry rules
+
+
+14.22 Bounce and warning messages
+---------------------------------
+
+bounce_message_file          content of bounce
+bounce_message_text          content of bounce
+bounce_return_body           include body if returning message
+bounce_return_linesize_limit limit on returned message line length
+bounce_return_message        include original message in bounce
+bounce_return_size_limit     limit on returned message
+bounce_sender_authentication send authenticated sender with bounce
+dsn_from                     set From: contents in bounces
+errors_copy                  copy bounce messages
+errors_reply_to              Reply-to: in bounces
+delay_warning                time schedule
+delay_warning_condition      condition for warning messages
+ignore_bounce_errors_after   discard undeliverable bounces
+smtp_return_error_details    give detail on rejections
+warn_message_file            content of warning message
+
+
+14.23 Alphabetical list of main options
+---------------------------------------
+
+Those options that undergo string expansion before use are marked with *.
+
++-----------------------------------------------------+
+|accept_8bitmime|Use: main|Type: boolean|Default: true|
++-----------------------------------------------------+
+
+This option causes Exim to send 8BITMIME in its response to an SMTP EHLO
+command, and to accept the BODY= parameter on MAIL commands. However, though
+Exim is 8-bit clean, it is not a protocol converter, and it takes no steps to
+do anything special with messages received by this route.
+
+Historically Exim kept this option off by default, but the maintainers feel
+that in today's Internet, this causes more problems than it solves. It now
+defaults to true. A more detailed analysis of the issues is provided by Dan
+Bernstein:
+
+https://cr.yp.to/smtp/8bitmime.html
+
+To log received 8BITMIME status use
+
+log_selector = +8bitmime
+
++---------------------------------------------------+
+|acl_not_smtp|Use: main|Type: string*|Default: unset|
++---------------------------------------------------+
+
+This option defines the ACL that is run when a non-SMTP message has been read
+and is on the point of being accepted. See chapter 44 for further details.
+
++--------------------------------------------------------+
+|acl_not_smtp_mime|Use: main|Type: string*|Default: unset|
++--------------------------------------------------------+
+
+This option defines the ACL that is run for individual MIME parts of non-SMTP
+messages. It operates in exactly the same way as acl_smtp_mime operates for
+SMTP messages.
+
++---------------------------------------------------------+
+|acl_not_smtp_start|Use: main|Type: string*|Default: unset|
++---------------------------------------------------------+
+
+This option defines the ACL that is run before Exim starts reading a non-SMTP
+message. See chapter 44 for further details.
+
++----------------------------------------------------+
+|acl_smtp_auth|Use: main|Type: string*|Default: unset|
++----------------------------------------------------+
+
+This option defines the ACL that is run when an SMTP AUTH command is received.
+See chapter 44 for further details.
+
++-------------------------------------------------------+
+|acl_smtp_connect|Use: main|Type: string*|Default: unset|
++-------------------------------------------------------+
+
+This option defines the ACL that is run when an SMTP connection is received.
+See chapter 44 for further details.
+
++----------------------------------------------------+
+|acl_smtp_data|Use: main|Type: string*|Default: unset|
++----------------------------------------------------+
+
+This option defines the ACL that is run after an SMTP DATA command has been
+processed and the message itself has been received, but before the final
+acknowledgment is sent. See chapter 44 for further details.
+
++----------------------------------------------------------+
+|acl_smtp_data_prdr|Use: main|Type: string*|Default: accept|
++----------------------------------------------------------+
+
+This option defines the ACL that, if the PRDR feature has been negotiated, is
+run for each recipient after an SMTP DATA command has been processed and the
+message itself has been received, but before the acknowledgment is sent. See
+chapter 44 for further details.
+
++----------------------------------------------------+
+|acl_smtp_dkim|Use: main|Type: string*|Default: unset|
++----------------------------------------------------+
+
+This option defines the ACL that is run for each DKIM signature (by default, or
+as specified in the dkim_verify_signers option) of a received message. See
+section 58.3 for further details.
+
++----------------------------------------------------+
+|acl_smtp_etrn|Use: main|Type: string*|Default: unset|
++----------------------------------------------------+
+
+This option defines the ACL that is run when an SMTP ETRN command is received.
+See chapter 44 for further details.
+
++----------------------------------------------------+
+|acl_smtp_expn|Use: main|Type: string*|Default: unset|
++----------------------------------------------------+
+
+This option defines the ACL that is run when an SMTP EXPN command is received.
+See chapter 44 for further details.
+
++----------------------------------------------------+
+|acl_smtp_helo|Use: main|Type: string*|Default: unset|
++----------------------------------------------------+
+
+This option defines the ACL that is run when an SMTP EHLO or HELO command is
+received. See chapter 44 for further details.
+
++----------------------------------------------------+
+|acl_smtp_mail|Use: main|Type: string*|Default: unset|
++----------------------------------------------------+
+
+This option defines the ACL that is run when an SMTP MAIL command is received.
+See chapter 44 for further details.
+
++--------------------------------------------------------+
+|acl_smtp_mailauth|Use: main|Type: string*|Default: unset|
++--------------------------------------------------------+
+
+This option defines the ACL that is run when there is an AUTH parameter on a
+MAIL command. See chapter 44 for details of ACLs, and chapter 33 for details of
+authentication.
+
++----------------------------------------------------+
+|acl_smtp_mime|Use: main|Type: string*|Default: unset|
++----------------------------------------------------+
+
+This option is available when Exim is built with the content-scanning
+extension. It defines the ACL that is run for each MIME part in a message. See
+section 45.4 for details.
+
++-------------------------------------------------------+
+|acl_smtp_notquit|Use: main|Type: string*|Default: unset|
++-------------------------------------------------------+
+
+This option defines the ACL that is run when an SMTP session ends without a
+QUIT command being received. See chapter 44 for further details.
+
++-------------------------------------------------------+
+|acl_smtp_predata|Use: main|Type: string*|Default: unset|
++-------------------------------------------------------+
+
+This option defines the ACL that is run when an SMTP DATA command is received,
+before the message itself is received. See chapter 44 for further details.
+
++----------------------------------------------------+
+|acl_smtp_quit|Use: main|Type: string*|Default: unset|
++----------------------------------------------------+
+
+This option defines the ACL that is run when an SMTP QUIT command is received.
+See chapter 44 for further details.
+
++----------------------------------------------------+
+|acl_smtp_rcpt|Use: main|Type: string*|Default: unset|
++----------------------------------------------------+
+
+This option defines the ACL that is run when an SMTP RCPT command is received.
+See chapter 44 for further details.
+
++--------------------------------------------------------+
+|acl_smtp_starttls|Use: main|Type: string*|Default: unset|
++--------------------------------------------------------+
+
+This option defines the ACL that is run when an SMTP STARTTLS command is
+received. See chapter 44 for further details.
+
++----------------------------------------------------+
+|acl_smtp_vrfy|Use: main|Type: string*|Default: unset|
++----------------------------------------------------+
+
+This option defines the ACL that is run when an SMTP VRFY command is received.
+See chapter 44 for further details.
+
++----------------------------------------------------------+
+|add_environment|Use: main|Type: string list|Default: empty|
++----------------------------------------------------------+
+
+This option adds individual environment variables that the currently linked
+libraries and programs in child processes may use. Each list element should be
+of the form "name=value".
+
+See 29.4 for the environment of pipe transports.
+
++--------------------------------------------------------+
+|admin_groups|Use: main|Type: string list*|Default: unset|
++--------------------------------------------------------+
+
+This option is expanded just once, at the start of Exim's processing. If the
+current group or any of the supplementary groups of an Exim caller is in this
+colon-separated list, the caller has admin privileges. If all your system
+programmers are in a specific group, for example, you can give them all Exim
+admin privileges by putting that group in admin_groups. However, this does not
+permit them to read Exim's spool files (whose group owner is the Exim gid). To
+permit this, you have to add individuals to the Exim group.
+
++------------------------------------------------------------+
+|allow_domain_literals|Use: main|Type: boolean|Default: false|
++------------------------------------------------------------+
+
+If this option is set, the RFC 2822 domain literal format is permitted in email
+addresses. The option is not set by default, because the domain literal format
+is not normally required these days, and few people know about it. It has,
+however, been exploited by mail abusers.
+
+Unfortunately, it seems that some DNS black list maintainers are using this
+format to report black listing to postmasters. If you want to accept messages
+addressed to your hosts by IP address, you need to set allow_domain_literals
+true, and also to add "@[]" to the list of local domains (defined in the named
+domain list local_domains in the default configuration). This "magic string"
+matches the domain literal form of all the local host's IP addresses.
+
++-----------------------------------------------------+
+|allow_mx_to_ip|Use: main|Type: boolean|Default: false|
++-----------------------------------------------------+
+
+It appears that more and more DNS zone administrators are breaking the rules
+and putting domain names that look like IP addresses on the right hand side of
+MX records. Exim follows the rules and rejects this, giving an error message
+that explains the misconfiguration. However, some other MTAs support this
+practice, so to avoid "Why can't Exim do this?" complaints, allow_mx_to_ip
+exists, in order to enable this heinous activity. It is not recommended, except
+when you have no other choice.
+
++---------------------------------------------------------+
+|allow_utf8_domains|Use: main|Type: boolean|Default: false|
++---------------------------------------------------------+
+
+Lots of discussion is going on about internationalized domain names. One camp
+is strongly in favour of just using UTF-8 characters, and it seems that at
+least two other MTAs permit this. This option allows Exim users to experiment
+if they wish.
+
+If it is set true, Exim's domain parsing function allows valid UTF-8
+multicharacters to appear in domain name components, in addition to letters,
+digits, and hyphens.
+
+If Exim is built with internationalization support and the SMTPUTF8 ESMTP
+option is in use (see chapter 60) this option can be left as default. Without
+that, if you want to look up such domain names in the DNS, you must also adjust
+the value of dns_check_names_pattern to match the extended form. A suitable
+setting is:
+
+dns_check_names_pattern = (?i)^(?>(?(1)\.|())[a-z0-9\xc0-\xff]\
+  (?>[-a-z0-9\x80-\xff]*[a-z0-9\x80-\xbf])?)+$
+
+Alternatively, you can just disable this feature by setting
+
+dns_check_names_pattern =
+
+That is, set the option to an empty string so that no check is done.
+
++----------------------------------------------------------+
+|auth_advertise_hosts|Use: main|Type: host list*|Default: *|
++----------------------------------------------------------+
+
+If any server authentication mechanisms are configured, Exim advertises them in
+response to an EHLO command only if the calling host matches this list.
+Otherwise, Exim does not advertise AUTH. Exim does not accept AUTH commands
+from clients to which it has not advertised the availability of AUTH. The
+advertising of individual authentication mechanisms can be controlled by the
+use of the server_advertise_condition generic authenticator option on the
+individual authenticators. See chapter 33 for further details.
+
+Certain mail clients (for example, Netscape) require the user to provide a name
+and password for authentication if AUTH is advertised, even though it may not
+be needed (the host may accept messages from hosts on its local LAN without
+authentication, for example). The auth_advertise_hosts option can be used to
+make these clients more friendly by excluding them from the set of hosts to
+which Exim advertises AUTH.
+
+If you want to advertise the availability of AUTH only when the connection is
+encrypted using TLS, you can make use of the fact that the value of this option
+is expanded, with a setting like this:
+
+auth_advertise_hosts = ${if eq{$tls_in_cipher}{}{}{*}}
+
+If $tls_in_cipher is empty, the session is not encrypted, and the result of the
+expansion is empty, thus matching no hosts. Otherwise, the result of the
+expansion is *, which matches all hosts.
+
++------------------------------------------+
+|auto_thaw|Use: main|Type: time|Default: 0s|
++------------------------------------------+
+
+If this option is set to a time greater than zero, a queue runner will try a
+new delivery attempt on any frozen message, other than a bounce message, if
+this much time has passed since it was frozen. This may result in the message
+being re-frozen if nothing has changed since the last attempt. It is a way of
+saying "keep on trying, even though there are big problems".
+
+Note: This is an old option, which predates timeout_frozen_after and 
+ignore_bounce_errors_after. It is retained for compatibility, but it is not
+thought to be very useful any more, and its use should probably be avoided.
+
++----------------------------------------------------+
+|av_scanner|Use: main|Type: string|Default: see below|
++----------------------------------------------------+
+
+This option is available if Exim is built with the content-scanning extension.
+It specifies which anti-virus scanner to use. The default value is:
+
+sophie:/var/run/sophie
+
+If the value of av_scanner starts with a dollar character, it is expanded
+before use. See section 45.1 for further details.
+
++------------------------------------------------+
+|bi_command|Use: main|Type: string|Default: unset|
++------------------------------------------------+
+
+This option supplies the name of a command that is run when Exim is called with
+the -bi option (see chapter 5). The string value is just the command name, it
+is not a complete command line. If an argument is required, it must come from
+the -oA command line option.
+
++----------------------------------------------------------+
+|bounce_message_file|Use: main|Type: string*|Default: unset|
++----------------------------------------------------------+
+
+This option defines a template file containing paragraphs of text to be used
+for constructing bounce messages. Details of the file's contents are given in
+chapter 50. The option is expanded to give the file path, which must be
+absolute and untainted. See also warn_message_file.
+
++---------------------------------------------------------+
+|bounce_message_text|Use: main|Type: string|Default: unset|
++---------------------------------------------------------+
+
+When this option is set, its contents are included in the default bounce
+message immediately after "This message was created automatically by mail
+delivery software." It is not used if bounce_message_file is set.
+
++--------------------------------------------------------+
+|bounce_return_body|Use: main|Type: boolean|Default: true|
++--------------------------------------------------------+
+
+This option controls whether the body of an incoming message is included in a
+bounce message when bounce_return_message is true. The default setting causes
+the entire message, both header and body, to be returned (subject to the value
+of bounce_return_size_limit). If this option is false, only the message header
+is included. In the case of a non-SMTP message containing an error that is
+detected during reception, only those header lines preceding the point at which
+the error was detected are returned.
+
++-----------------------------------------------------------------+
+|bounce_return_linesize_limit|Use: main|Type: integer|Default: 998|
++-----------------------------------------------------------------+
+
+This option sets a limit in bytes on the line length of messages that are
+returned to senders due to delivery problems, when bounce_return_message is
+true. The default value corresponds to RFC limits. If the message being
+returned has lines longer than this value it is treated as if the 
+bounce_return_size_limit (below) restriction was exceeded.
+
+The option also applies to bounces returned when an error is detected during
+reception of a message. In this case lines from the original are truncated.
+
+The option does not apply to messages generated by an autoreply transport.
+
++-----------------------------------------------------------+
+|bounce_return_message|Use: main|Type: boolean|Default: true|
++-----------------------------------------------------------+
+
+If this option is set false, none of the original message is included in bounce
+messages generated by Exim. See also bounce_return_size_limit and 
+bounce_return_body.
+
++--------------------------------------------------------------+
+|bounce_return_size_limit|Use: main|Type: integer|Default: 100K|
++--------------------------------------------------------------+
+
+This option sets a limit in bytes on the size of messages that are returned to
+senders as part of bounce messages when bounce_return_message is true. The
+limit should be less than the value of the global message_size_limit and of any
+message_size_limit settings on transports, to allow for the bounce text that
+Exim generates. If this option is set to zero there is no limit.
+
+When the body of any message that is to be included in a bounce message is
+greater than the limit, it is truncated, and a comment pointing this out is
+added at the top. The actual cutoff may be greater than the value given, owing
+to the use of buffering for transferring the message in chunks (typically 8K in
+size). The idea is to save bandwidth on those undeliverable 15-megabyte
+messages.
+
++------------------------------------------------------------------+
+|bounce_sender_authentication|Use: main|Type: string|Default: unset|
++------------------------------------------------------------------+
+
+This option provides an authenticated sender address that is sent with any
+bounce messages generated by Exim that are sent over an authenticated SMTP
+connection. A typical setting might be:
+
+bounce_sender_authentication = mailer-daemon@my.domain.example
+
+which would cause bounce messages to be sent using the SMTP command:
+
+MAIL FROM:<> AUTH=mailer-daemon@my.domain.example
+
+The value of bounce_sender_authentication must always be a complete email
+address.
+
++---------------------------------------------------------------+
+|callout_domain_negative_expire|Use: main|Type: time|Default: 3h|
++---------------------------------------------------------------+
+
+This option specifies the expiry time for negative callout cache data for a
+domain. See section 44.46 for details of callout verification, and section
+44.48 for details of the caching.
+
++---------------------------------------------------------------+
+|callout_domain_positive_expire|Use: main|Type: time|Default: 7d|
++---------------------------------------------------------------+
+
+This option specifies the expiry time for positive callout cache data for a
+domain. See section 44.46 for details of callout verification, and section
+44.48 for details of the caching.
+
++--------------------------------------------------------+
+|callout_negative_expire|Use: main|Type: time|Default: 2h|
++--------------------------------------------------------+
+
+This option specifies the expiry time for negative callout cache data for an
+address. See section 44.46 for details of callout verification, and section
+44.48 for details of the caching.
+
++---------------------------------------------------------+
+|callout_positive_expire|Use: main|Type: time|Default: 24h|
++---------------------------------------------------------+
+
+This option specifies the expiry time for positive callout cache data for an
+address. See section 44.46 for details of callout verification, and section
+44.48 for details of the caching.
+
++--------------------------------------------------------------------+
+|callout_random_local_part|Use: main|Type: string*|Default: see below|
++--------------------------------------------------------------------+
+
+This option defines the "random" local part that can be used as part of callout
+verification. The default value is
+
+$primary_hostname-$tod_epoch-testing
+
+See section 44.47 for details of how this value is used.
+
++-----------------------------------------------------+
+|check_log_inodes|Use: main|Type: integer|Default: 100|
++-----------------------------------------------------+
+
+See check_spool_space below.
+
++----------------------------------------------------+
+|check_log_space|Use: main|Type: integer|Default: 10M|
++----------------------------------------------------+
+
+See check_spool_space below.
+
++----------------------------------------------------------+
+|check_rfc2047_length|Use: main|Type: boolean|Default: true|
++----------------------------------------------------------+
+
+RFC 2047 defines a way of encoding non-ASCII characters in headers using a
+system of "encoded words". The RFC specifies a maximum length for an encoded
+word; strings to be encoded that exceed this length are supposed to use
+multiple encoded words. By default, Exim does not recognize encoded words that
+exceed the maximum length. However, it seems that some software, in violation
+of the RFC, generates overlong encoded words. If check_rfc2047_length is set
+false, Exim recognizes encoded words of any length.
+
++-------------------------------------------------------+
+|check_spool_inodes|Use: main|Type: integer|Default: 100|
++-------------------------------------------------------+
+
+See check_spool_space below.
+
++------------------------------------------------------+
+|check_spool_space|Use: main|Type: integer|Default: 10M|
++------------------------------------------------------+
+
+The four check_... options allow for checking of disk resources before a
+message is accepted.
+
+When any of these options are nonzero, they apply to all incoming messages. If
+you want to apply different checks to different kinds of message, you can do so
+by testing the variables $log_inodes, $log_space, $spool_inodes, and
+$spool_space in an ACL with appropriate additional conditions.
+
+check_spool_space and check_spool_inodes check the spool partition if either
+value is greater than zero, for example:
+
+check_spool_space = 100M
+check_spool_inodes = 100
+
+The spool partition is the one that contains the directory defined by
+SPOOL_DIRECTORY in Local/Makefile. It is used for holding messages in transit.
+
+check_log_space and check_log_inodes check the partition in which log files are
+written if either is greater than zero. These should be set only if 
+log_file_path and spool_directory refer to different partitions.
+
+If there is less space or fewer inodes than requested, Exim refuses to accept
+incoming mail. In the case of SMTP input this is done by giving a 452 temporary
+error response to the MAIL command. If ESMTP is in use and there was a SIZE
+parameter on the MAIL command, its value is added to the check_spool_space
+value, and the check is performed even if check_spool_space is zero, unless 
+no_smtp_check_spool_space is set.
+
+The values for check_spool_space and check_log_space are held as a number of
+kilobytes (though specified in bytes). If a non-multiple of 1024 is specified,
+it is rounded up.
+
+For non-SMTP input and for batched SMTP input, the test is done at start-up; on
+failure a message is written to stderr and Exim exits with a non-zero code, as
+it obviously cannot send an error message of any kind.
+
+There is a slight performance penalty for these checks. Versions of Exim
+preceding 4.88 had these disabled by default; high-rate installations confident
+they will never run out of resources may wish to deliberately disable them.
+
++--------------------------------------------------------------+
+|chunking_advertise_hosts|Use: main|Type: host list*|Default: *|
++--------------------------------------------------------------+
+
+The CHUNKING extension (RFC3030) will be advertised in the EHLO message to
+these hosts. Hosts may use the BDAT command as an alternate to DATA.
+
++-------------------------------------------------------------------------+
+|commandline_checks_require_admin|Use: main|Type: boolean|Default: "false"|
++-------------------------------------------------------------------------+
+
+This option restricts various basic checking features to require an
+administrative user. This affects most of the -b* options, such as -be.
+
++----------------------------------------------------+
+|debug_store|Use: main|Type: boolean|Default: "false"|
++----------------------------------------------------+
+
+This option, when true, enables extra checking in Exim's internal memory
+management. For use when a memory corruption issue is being investigated, it
+should normally be left as default.
+
++--------------------------------------------------------+
+|daemon_smtp_ports|Use: main|Type: string|Default: "smtp"|
++--------------------------------------------------------+
+
+This option specifies one or more default SMTP ports on which the Exim daemon
+listens. See chapter 13 for details of how it is used. For backward
+compatibility, daemon_smtp_port (singular) is a synonym.
+
++---------------------------------------------------------+
+|daemon_startup_retries|Use: main|Type: integer|Default: 9|
++---------------------------------------------------------+
+
+This option, along with daemon_startup_sleep, controls the retrying done by the
+daemon at startup when it cannot immediately bind a listening socket (typically
+because the socket is already in use): daemon_startup_retries defines the
+number of retries after the first failure, and daemon_startup_sleep defines the
+length of time to wait between retries.
+
++------------------------------------------------------+
+|daemon_startup_sleep|Use: main|Type: time|Default: 30s|
++------------------------------------------------------+
+
+See daemon_startup_retries.
+
++----------------------------------------------------+
+|delay_warning|Use: main|Type: time list|Default: 24h|
++----------------------------------------------------+
+
+When a message is delayed, Exim sends a warning message to the sender at
+intervals specified by this option. The data is a colon-separated list of times
+after which to send warning messages. If the value of the option is an empty
+string or a zero time, no warnings are sent. Up to 10 times may be given. If a
+message has been in the queue for longer than the last time, the last interval
+between the times is used to compute subsequent warning times. For example,
+with
+
+delay_warning = 4h:8h:24h
+
+the first message is sent after 4 hours, the second after 8 hours, and the
+third one after 24 hours. After that, messages are sent every 16 hours, because
+that is the interval between the last two times on the list. If you set just
+one time, it specifies the repeat interval. For example, with:
+
+delay_warning = 6h
+
+messages are repeated every six hours. To stop warnings after a given time, set
+a very large time at the end of the list. For example:
+
+delay_warning = 2h:12h:99d
+
+Note that the option is only evaluated at the time a delivery attempt fails,
+which depends on retry and queue-runner configuration. Typically retries will
+be configured more frequently than warning messages.
+
++------------------------------------------------------------------+
+|delay_warning_condition|Use: main|Type: string*|Default: see below|
++------------------------------------------------------------------+
+
+The string is expanded at the time a warning message might be sent. If all the
+deferred addresses have the same domain, it is set in $domain during the
+expansion. Otherwise $domain is empty. If the result of the expansion is a
+forced failure, an empty string, or a string matching any of "0", "no" or
+"false" (the comparison being done caselessly) then the warning message is not
+sent. The default is:
+
+delay_warning_condition = ${if or {\
+  { !eq{$h_list-id:$h_list-post:$h_list-subscribe:}{} }\
+  { match{$h_precedence:}{(?i)bulk|list|junk} }\
+  { match{$h_auto-submitted:}{(?i)auto-generated|auto-replied} }\
+  } {no}{yes}}
+
+This suppresses the sending of warnings for messages that contain List-ID:, 
+List-Post:, or List-Subscribe: headers, or have "bulk", "list" or "junk" in a 
+Precedence: header, or have "auto-generated" or "auto-replied" in an 
+Auto-Submitted: header.
+
++-------------------------------------------------------------+
+|deliver_drop_privilege|Use: main|Type: boolean|Default: false|
++-------------------------------------------------------------+
+
+If this option is set true, Exim drops its root privilege at the start of a
+delivery process, and runs as the Exim user throughout. This severely restricts
+the kinds of local delivery that are possible, but is viable in certain types
+of configuration. There is a discussion about the use of root privilege in
+chapter 56.
+
++-----------------------------------------------------------------+
+|deliver_queue_load_max|Use: main|Type: fixed-point|Default: unset|
++-----------------------------------------------------------------+
+
+When this option is set, a queue run is abandoned if the system load average
+becomes greater than the value of the option. The option has no effect on
+ancient operating systems on which Exim cannot determine the load average. See
+also queue_only_load and smtp_load_reserve.
+
++----------------------------------------------------------+
+|delivery_date_remove|Use: main|Type: boolean|Default: true|
++----------------------------------------------------------+
+
+Exim's transports have an option for adding a Delivery-date: header to a
+message when it is delivered, in exactly the same way as Return-path: is
+handled. Delivery-date: records the actual time of delivery. Such headers
+should not be present in incoming messages, and this option causes them to be
+removed at the time the message is received, to avoid any problems that might
+occur when a delivered message is subsequently sent on to some other recipient.
+
++----------------------------------------------------+
+|disable_fsync|Use: main|Type: boolean|Default: false|
++----------------------------------------------------+
+
+This option is available only if Exim was built with the compile-time option
+ENABLE_DISABLE_FSYNC. When this is not set, a reference to disable_fsync in a
+runtime configuration generates an "unknown option" error. You should not build
+Exim with ENABLE_DISABLE_FSYNC or set disable_fsync unless you really, really,
+really understand what you are doing. No pre-compiled distributions of Exim
+should ever make this option available.
+
+When disable_fsync is set true, Exim no longer calls fsync() to force updated
+files' data to be written to disc before continuing. Unexpected events such as
+crashes and power outages may cause data to be lost or scrambled. Here be
+Dragons. Beware.
+
++---------------------------------------------------+
+|disable_ipv6|Use: main|Type: boolean|Default: false|
++---------------------------------------------------+
+
+If this option is set true, even if the Exim binary has IPv6 support, no IPv6
+activities take place. AAAA records are never looked up, and any IPv6 addresses
+that are listed in local_interfaces, data for the manualroute router, etc. are
+ignored. If IP literals are enabled, the ipliteral router declines to handle
+IPv6 literal addresses.
+
++-----------------------------------------------------------------------+
+|dkim_verify_hashes|Use: main|Type: string list|Default: sha256 : sha512|
++-----------------------------------------------------------------------+
+
+This option gives a list of hash types which are acceptable in signatures, and
+an order of processing. Signatures with algorithms not in the list will be
+ignored.
+
+Acceptable values include:
+
+sha1
+sha256
+sha512
+
+Note that the acceptance of sha1 violates RFC 8301.
+
++-----------------------------------------------------------------------+
+|dkim_verify_keytypes|Use: main|Type: string list|Default: ed25519 : rsa|
++-----------------------------------------------------------------------+
+
+This option gives a list of key types which are acceptable in signatures, and
+an order of processing. Signatures with algorithms not in the list will be
+ignored.
+
++-----------------------------------------------------------------------------+
+|dkim_verify_min_keysizes| Use:   |  Type: string  |Default: rsa=1024 ed25519=|
+|                        |  main  |      list      |                       250|
++-----------------------------------------------------------------------------+
+
+This option gives a list of key sizes which are acceptable in signatures. The
+list is keyed by the algorithm type for the key; the values are in bits.
+Signatures with keys smaller than given by this option will fail verification.
+
+The default enforces the RFC 8301 minimum key size for RSA signatures.
+
++----------------------------------------------------------+
+|dkim_verify_minimal|Use: main|Type: boolean|Default: false|
++----------------------------------------------------------+
+
+If set to true, verification of signatures will terminate after the first
+success.
+
++-----------------------------------------------------------------------+
+|dkim_verify_signers|Use: main|Type: domain list*|Default: $dkim_signers|
++-----------------------------------------------------------------------+
+
+This option gives a list of DKIM domains for which the DKIM ACL is run. It is
+expanded after the message is received; by default it runs the ACL once for
+each signature in the message. See section 58.3.
+
++------------------------------------------------------------+
+|dmarc_forensic_sender|Use: main|Type: string*|Default: unset|
++------------------------------------------------------------+
+
++--------------------------------------------------------+
+|dmarc_history_file|Use: main|Type: string|Default: unset|
++--------------------------------------------------------+
+
++----------------------------------------------------+
+|dmarc_tld_file|Use: main|Type: string|Default: unset|
++----------------------------------------------------+
+
+These options control DMARC processing. See section 58.6 for details.
+
++--------------------------------------------------------------------+
+|dns_again_means_nonexist|Use: main|Type: domain list*|Default: unset|
++--------------------------------------------------------------------+
+
+DNS lookups give a "try again" response for the DNS errors "non-authoritative
+host not found" and "SERVERFAIL". This can cause Exim to keep trying to deliver
+a message, or to give repeated temporary errors to incoming mail. Sometimes the
+effect is caused by a badly set up name server and may persist for a long time.
+If a domain which exhibits this problem matches anything in 
+dns_again_means_nonexist, it is treated as if it did not exist. This option
+should be used with care. You can make it apply to reverse lookups by a setting
+such as this:
+
+dns_again_means_nonexist = *.in-addr.arpa
+
+This option applies to all DNS lookups that Exim does. It also applies when the
+gethostbyname() or getipnodebyname() functions give temporary errors, since
+these are most likely to be caused by DNS lookup problems. The dnslookup router
+has some options of its own for controlling what happens when lookups for MX or
+SRV records give temporary errors. These more specific options are applied
+after this global option.
+
++-----------------------------------------------------------------+
+|dns_check_names_pattern|Use: main|Type: string|Default: see below|
++-----------------------------------------------------------------+
+
+When this option is set to a non-empty string, it causes Exim to check domain
+names for characters that are not allowed in host names before handing them to
+the DNS resolver, because some resolvers give temporary errors for names that
+contain unusual characters. If a domain name contains any unwanted characters,
+a "not found" result is forced, and the resolver is not called. The check is
+done by matching the domain name against a regular expression, which is the
+value of this option. The default pattern is
+
+dns_check_names_pattern = \
+  (?i)^(?>(?(1)\.|())[^\W_](?>[a-z0-9/-]*[^\W_])?)+$
+
+which permits only letters, digits, slashes, and hyphens in components, but
+they must start and end with a letter or digit. Slashes are not, in fact,
+permitted in host names, but they are found in certain NS records (which can be
+accessed in Exim by using a dnsdb lookup). If you set allow_utf8_domains, you
+must modify this pattern, or set the option to an empty string.
+
++-------------------------------------------------------+
+|dns_csa_search_limit|Use: main|Type: integer|Default: 5|
++-------------------------------------------------------+
+
+This option controls the depth of parental searching for CSA SRV records in the
+DNS, as described in more detail in section 44.52.
+
++---------------------------------------------------------+
+|dns_csa_use_reverse|Use: main|Type: boolean|Default: true|
++---------------------------------------------------------+
+
+This option controls whether or not an IP address, given as a CSA domain, is
+reversed and looked up in the reverse DNS, as described in more detail in
+section 44.52.
+
++--------------------------------------------------+
+|dns_cname_loops|Use: main|Type: integer|Default: 1|
++--------------------------------------------------+
+
+This option controls the following of CNAME chains, needed if the resolver does
+not do it internally. As of 2018 most should, and the default can be left. If
+you have an ancient one, a value of 10 is likely needed.
+
+The default value of one CNAME-follow is needed thanks to the observed return
+for an MX request, given no MX presence but a CNAME to an A, of the CNAME.
+
++-------------------------------------------------+
+|dns_dnssec_ok|Use: main|Type: integer|Default: -1|
++-------------------------------------------------+
+
+If this option is set to a non-negative number then Exim will initialise the
+DNS resolver library to either use or not use DNSSEC, overriding the system
+default. A value of 0 coerces DNSSEC off, a value of 1 coerces DNSSEC on.
+
+If the resolver library does not support DNSSEC then this option has no effect.
+
+On Linux with glibc 2.31 or newer this is insufficient, the resolver library
+will default to stripping out a successful validation status. This will break a
+previously working Exim installation. Provided that you do trust the resolver
+(ie, is on localhost) you can tell glibc to pass through any successful
+validation with a new option in /etc/resolv.conf:
+
+options trust-ad
+
++-----------------------------------------------------------+
+|dns_ipv4_lookup|Use: main|Type: domain list*|Default: unset|
++-----------------------------------------------------------+
+
+When Exim is compiled with IPv6 support and disable_ipv6 is not set, it looks
+for IPv6 address records (AAAA records) as well as IPv4 address records (A
+records) when trying to find IP addresses for hosts, unless the host's domain
+matches this list.
+
+This is a fudge to help with name servers that give big delays or otherwise do
+not work for the AAAA record type. In due course, when the world's name servers
+have all been upgraded, there should be no need for this option. Note that all
+lookups, including those done for verification, are affected; this will result
+in verify failure for IPv6 connections or ones using names only valid for IPv6
+addresses.
+
++--------------------------------------------+
+|dns_retrans|Use: main|Type: time|Default: 0s|
++--------------------------------------------+
+
+The options dns_retrans and dns_retry can be used to set the retransmission and
+retry parameters for DNS lookups. Values of zero (the defaults) leave the
+system default settings unchanged. The first value is the time between retries,
+and the second is the number of retries. It isn't totally clear exactly how
+these settings affect the total time a DNS lookup may take. I haven't found any
+documentation about timeouts on DNS lookups; these parameter values are
+available in the external resolver interface structure, but nowhere does it
+seem to describe how they are used or what you might want to set in them. See
+also the slow_lookup_log option.
+
++--------------------------------------------+
+|dns_retry|Use: main|Type: integer|Default: 0|
++--------------------------------------------+
+
+See dns_retrans above.
+
++--------------------------------------------------------+
+|dns_trust_aa|Use: main|Type: domain list*|Default: unset|
++--------------------------------------------------------+
+
+If this option is set then lookup results marked with the AA bit (Authoritative
+Answer) are trusted the same way as if they were DNSSEC-verified. The authority
+section's name of the answer must match with this expanded domain list.
+
+Use this option only if you talk directly to a resolver that is authoritative
+for some zones and does not set the AD (Authentic Data) bit in the answer. Some
+DNS servers may have an configuration option to mark the answers from their own
+zones as verified (they set the AD bit). Others do not have this option. It is
+considered as poor practice using a resolver that is an authoritative server
+for some zones.
+
+Use this option only if you really have to (e.g. if you want to use DANE for
+remote delivery to a server that is listed in the DNS zones that your resolver
+is authoritative for).
+
+If the DNS answer packet has the AA bit set and contains resource record in the
+answer section, the name of the first NS record appearing in the authority
+section is compared against the list. If the answer packet is authoritative but
+the answer section is empty, the name of the first SOA record in the
+authoritative section is used instead.
+
++-------------------------------------------------+
+|dns_use_edns0|Use: main|Type: integer|Default: -1|
++-------------------------------------------------+
+
+If this option is set to a non-negative number then Exim will initialise the
+DNS resolver library to either use or not use EDNS0 extensions, overriding the
+system default. A value of 0 coerces EDNS0 off, a value of 1 coerces EDNS0 on.
+
+If the resolver library does not support EDNS0 then this option has no effect.
+
+OpenBSD's asr resolver routines are known to ignore the EDNS0 option; this
+means that DNSSEC will not work with Exim on that platform either, unless Exim
+is linked against an alternative DNS client library.
+
++----------------------------------------------+
+|drop_cr|Use: main|Type: boolean|Default: false|
++----------------------------------------------+
+
+This is an obsolete option that is now a no-op. It used to affect the way Exim
+handled CR and LF characters in incoming messages. What happens now is
+described in section 48.2.
+
++-------------------------------------------------------------+
+|dsn_advertise_hosts|Use: main|Type: host list*|Default: unset|
++-------------------------------------------------------------+
+
+DSN extensions (RFC3461) will be advertised in the EHLO message to, and
+accepted from, these hosts. Hosts may use the NOTIFY and ORCPT options on RCPT
+TO commands, and RET and ENVID options on MAIL FROM commands. A NOTIFY=SUCCESS
+option requests success-DSN messages. A NOTIFY= option with no argument
+requests that no delay or failure DSNs are sent. Note: Supplying success-DSN
+messages has been criticised on privacy grounds; it can leak details of
+internal forwarding.
+
++---------------------------------------------------+
+|dsn_from|Use: main|Type: string*|Default: see below|
++---------------------------------------------------+
+
+This option can be used to vary the contents of From: header lines in bounces
+and other automatically generated messages ("Delivery Status Notifications" -
+hence the name of the option). The default setting is:
+
+dsn_from = Mail Delivery System <Mailer-Daemon@$qualify_domain>
+
+The value is expanded every time it is needed. If the expansion fails, a panic
+is logged, and the default value is used.
+
++--------------------------------------------------------+
+|envelope_to_remove|Use: main|Type: boolean|Default: true|
++--------------------------------------------------------+
+
+Exim's transports have an option for adding an Envelope-to: header to a message
+when it is delivered, in exactly the same way as Return-path: is handled. 
+Envelope-to: records the original recipient address from the message's envelope
+that caused the delivery to happen. Such headers should not be present in
+incoming messages, and this option causes them to be removed at the time the
+message is received, to avoid any problems that might occur when a delivered
+message is subsequently sent on to some other recipient.
+
++-------------------------------------------------------+
+|errors_copy|Use: main|Type: string list*|Default: unset|
++-------------------------------------------------------+
+
+Setting this option causes Exim to send bcc copies of bounce messages that it
+generates to other addresses. Note: This does not apply to bounce messages
+coming from elsewhere. The value of the option is a colon-separated list of
+items. Each item consists of a pattern, terminated by white space, followed by
+a comma-separated list of email addresses. If a pattern contains spaces, it
+must be enclosed in double quotes.
+
+Each pattern is processed in the same way as a single item in an address list
+(see section 10.20). When a pattern matches the recipient of the bounce
+message, the message is copied to the addresses on the list. The items are
+scanned in order, and once a matching one is found, no further items are
+examined. For example:
+
+errors_copy = spqr@mydomain   postmaster@mydomain.example :\
+              rqps@mydomain   hostmaster@mydomain.example,\
+                              postmaster@mydomain.example
+
+The address list is expanded before use. The expansion variables $local_part
+and $domain are set from the original recipient of the error message, and if
+there was any wildcard matching in the pattern, the expansion variables $0, $1,
+etc. are set in the normal way.
+
++-----------------------------------------------------+
+|errors_reply_to|Use: main|Type: string|Default: unset|
++-----------------------------------------------------+
+
+By default, Exim's bounce and delivery warning messages contain the header line
+
+From: Mail Delivery System <Mailer-Daemon@qualify-domain>
+
+where qualify-domain is the value of the qualify_domain option. A warning
+message that is generated by the quota_warn_message option in an appendfile
+transport may contain its own From: header line that overrides the default.
+
+Experience shows that people reply to bounce messages. If the errors_reply_to
+option is set, a Reply-To: header is added to bounce and warning messages. For
+example:
+
+errors_reply_to = postmaster@my.domain.example
+
+The value of the option is not expanded. It must specify a valid RFC 2822
+address. However, if a warning message that is generated by the 
+quota_warn_message option in an appendfile transport contain its own Reply-To:
+header line, the value of the errors_reply_to option is not used.
+
++---------------------------------------------------+
+|event_action|Use: main|Type: string*|Default: unset|
++---------------------------------------------------+
+
+This option declares a string to be expanded for Exim's events mechanism. For
+details see chapter 61.
+
++------------------------------------------------------------------+
+|exim_group|Use: main|Type: string|Default: compile-time configured|
++------------------------------------------------------------------+
+
+This option changes the gid under which Exim runs when it gives up root
+privilege. The default value is compiled into the binary. The value of this
+option is used only when exim_user is also set. Unless it consists entirely of
+digits, the string is looked up using getgrnam(), and failure causes a
+configuration error. See chapter 56 for a discussion of security issues.
+
++---------------------------------------------------+
+|exim_path|Use: main|Type: string|Default: see below|
++---------------------------------------------------+
+
+This option specifies the path name of the Exim binary, which is used when Exim
+needs to re-exec itself. The default is set up to point to the file exim in the
+directory configured at compile time by the BIN_DIRECTORY setting. It is
+necessary to change exim_path if, exceptionally, Exim is run from some other
+place. Warning: Do not use a macro to define the value of this option, because
+you will break those Exim utilities that scan the configuration file to find
+where the binary is. (They then use the -bP option to extract option settings
+such as the value of spool_directory.)
+
++-----------------------------------------------------------------+
+|exim_user|Use: main|Type: string|Default: compile-time configured|
++-----------------------------------------------------------------+
+
+This option changes the uid under which Exim runs when it gives up root
+privilege. The default value is compiled into the binary. Ownership of the run
+time configuration file and the use of the -C and -D command line options is
+checked against the values in the binary, not what is set here.
+
+Unless it consists entirely of digits, the string is looked up using getpwnam()
+, and failure causes a configuration error. If exim_group is not also supplied,
+the gid is taken from the result of getpwnam() if it is used. See chapter 56
+for a discussion of security issues.
+
++------------------------------------------------------------+
+|exim_version|Use: main|Type: string|Default: current version|
++------------------------------------------------------------+
+
+This option overrides the $version_number/$exim_version that Exim reports in
+various places. Use with care; this may fool stupid security scanners.
+
++-----------------------------------------------------------------+
+|extra_local_interfaces|Use: main|Type: string list|Default: unset|
++-----------------------------------------------------------------+
+
+This option defines network interfaces that are to be considered local when
+routing, but which are not used for listening by the daemon. See section 13.8
+for details.
+
++------------------------------------------------------------------------+
+|extract_addresses_remove_arguments|Use: main|Type: boolean|Default: true|
++------------------------------------------------------------------------+
+
+According to some Sendmail documentation (Sun, IRIX, HP-UX), if any addresses
+are present on the command line when the -t option is used to build an envelope
+from a message's To:, Cc: and Bcc: headers, the command line addresses are
+removed from the recipients list. This is also how Smail behaves. However,
+other Sendmail documentation (the O'Reilly book) states that command line
+addresses are added to those obtained from the header lines. When 
+extract_addresses_remove_arguments is true (the default), Exim subtracts
+argument headers. If it is set false, Exim adds rather than removes argument
+addresses.
+
++---------------------------------------------------+
+|finduser_retries|Use: main|Type: integer|Default: 0|
++---------------------------------------------------+
+
+On systems running NIS or other schemes in which user and group information is
+distributed from a remote system, there can be times when getpwnam() and
+related functions fail, even when given valid data, because things time out.
+Unfortunately these failures cannot be distinguished from genuine "not found"
+errors. If finduser_retries is set greater than zero, Exim will try that many
+extra times to find a user or a group, waiting for one second between retries.
+
+You should not set this option greater than zero if your user information is in
+a traditional /etc/passwd file, because it will cause Exim needlessly to search
+the file multiple times for non-existent users, and also cause delay.
+
++-----------------------------------------------------------------------+
+|freeze_tell|Use: main|Type: string list, comma separated|Default: unset|
++-----------------------------------------------------------------------+
+
+On encountering certain errors, or when configured to do so in a system filter,
+ACL, or special router, Exim freezes a message. This means that no further
+delivery attempts take place until an administrator thaws the message, or the 
+auto_thaw, ignore_bounce_errors_after, or timeout_frozen_after feature cause it
+to be processed. If freeze_tell is set, Exim generates a warning message
+whenever it freezes something, unless the message it is freezing is a
+locally-generated bounce message. (Without this exception there is the
+possibility of looping.) The warning message is sent to the addresses supplied
+as the comma-separated value of this option. If several of the message's
+addresses cause freezing, only a single message is sent. If the freezing was
+automatic, the reason(s) for freezing can be found in the message log. If you
+configure freezing in a filter or ACL, you must arrange for any logging that
+you require.
+
++-------------------------------------------------+
+|gecos_name|Use: main|Type: string*|Default: unset|
++-------------------------------------------------+
+
+Some operating systems, notably HP-UX, use the "gecos" field in the system
+password file to hold other information in addition to users' real names. Exim
+looks up this field for use when it is creating Sender: or From: headers. If
+either gecos_pattern or gecos_name are unset, the contents of the field are
+used unchanged, except that, if an ampersand is encountered, it is replaced by
+the user's login name with the first character forced to upper case, since this
+is a convention that is observed on many systems.
+
+When these options are set, gecos_pattern is treated as a regular expression
+that is to be applied to the field (again with & replaced by the login name),
+and if it matches, gecos_name is expanded and used as the user's name.
+
+Numeric variables such as $1, $2, etc. can be used in the expansion to pick up
+sub-fields that were matched by the pattern. In HP-UX, where the user's name
+terminates at the first comma, the following can be used:
+
+gecos_pattern = ([^,]*)
+gecos_name = $1
+
++---------------------------------------------------+
+|gecos_pattern|Use: main|Type: string|Default: unset|
++---------------------------------------------------+
+
+See gecos_name above.
+
++---------------------------------------------------------+
+|gnutls_compat_mode|Use: main|Type: boolean|Default: unset|
++---------------------------------------------------------+
+
+This option controls whether GnuTLS is used in compatibility mode in an Exim
+server. This reduces security slightly, but improves interworking with older
+implementations of TLS.
+
++---------------------------------------------------------------+
+|gnutls_allow_auto_pkcs11|Use: main|Type: boolean|Default: unset|
++---------------------------------------------------------------+
+
+This option will let GnuTLS (2.12.0 or later) autoload PKCS11 modules with the
+p11-kit configuration files in /etc/pkcs11/modules/.
+
+See https://www.gnutls.org/manual/gnutls.html#Smart-cards-and-HSMs for
+documentation.
+
++---------------------------------------------------------+
+|headers_charset|Use: main|Type: string|Default: see below|
++---------------------------------------------------------+
+
+This option sets a default character set for translating from encoded MIME
+"words" in header lines, when referenced by an $h_xxx expansion item. The
+default is the value of HEADERS_CHARSET in Local/Makefile. The ultimate default
+is ISO-8859-1. For more details see the description of header insertions in
+section 11.5.
+
++---------------------------------------------------------+
+|header_maxsize|Use: main|Type: integer|Default: see below|
++---------------------------------------------------------+
+
+This option controls the overall maximum size of a message's header section.
+The default is the value of HEADER_MAXSIZE in Local/Makefile; the default for
+that is 1M. Messages with larger header sections are rejected.
+
++------------------------------------------------------+
+|header_line_maxsize|Use: main|Type: integer|Default: 0|
++------------------------------------------------------+
+
+This option limits the length of any individual header line in a message, after
+all the continuations have been joined together. Messages with individual
+header lines that are longer than the limit are rejected. The default value of
+zero means "no limit".
+
++----------------------------------------------------------------+
+|helo_accept_junk_hosts|Use: main|Type: host list*|Default: unset|
++----------------------------------------------------------------+
+
+Exim checks the syntax of HELO and EHLO commands for incoming SMTP mail, and
+gives an error response for invalid data. Unfortunately, there are some SMTP
+clients that send syntactic junk. They can be accommodated by setting this
+option. Note that this is a syntax check only. See helo_verify_hosts if you
+want to do semantic checking. See also helo_allow_chars for a way of extending
+the permitted character set.
+
++------------------------------------------------------+
+|helo_allow_chars|Use: main|Type: string|Default: unset|
++------------------------------------------------------+
+
+This option can be set to a string of rogue characters that are permitted in
+all EHLO and HELO names in addition to the standard letters, digits, hyphens,
+and dots. If you really must allow underscores, you can set
+
+helo_allow_chars = _
+
+Note that the value is one string, not a list.
+
++-----------------------------------------------------------------+
+|helo_lookup_domains|Use: main|Type: domain list*|Default: "@:@[]"|
++-----------------------------------------------------------------+
+
+If the domain given by a client in a HELO or EHLO command matches this list, a
+reverse lookup is done in order to establish the host's true name. The default
+forces a lookup if the client host gives the server's name or any of its IP
+addresses (in brackets), something that broken clients have been seen to do.
+
++---------------------------------------------------------------+
+|helo_try_verify_hosts|Use: main|Type: host list*|Default: unset|
++---------------------------------------------------------------+
+
+By default, Exim just checks the syntax of HELO and EHLO commands (see 
+helo_accept_junk_hosts and helo_allow_chars). However, some sites like to do
+more extensive checking of the data supplied by these commands. The ACL
+condition "verify = helo" is provided to make this possible. Formerly, it was
+necessary also to set this option (helo_try_verify_hosts) to force the check to
+occur. From release 4.53 onwards, this is no longer necessary. If the check has
+not been done before "verify = helo" is encountered, it is done at that time.
+Consequently, this option is obsolete. Its specification is retained here for
+backwards compatibility.
+
+When an EHLO or HELO command is received, if the calling host matches 
+helo_try_verify_hosts, Exim checks that the host name given in the HELO or EHLO
+command either:
+
+  * is an IP literal matching the calling address of the host, or
+
+  * matches the host name that Exim obtains by doing a reverse lookup of the
+    calling host address, or
+
+  * when looked up in DNS yields the calling host address.
+
+However, the EHLO or HELO command is not rejected if any of the checks fail.
+Processing continues, but the result of the check is remembered, and can be
+detected later in an ACL by the "verify = helo" condition.
+
+If DNS was used for successful verification, the variable $helo_verify_dnssec
+records the DNSSEC status of the lookups.
+
++-----------------------------------------------------------+
+|helo_verify_hosts|Use: main|Type: host list*|Default: unset|
++-----------------------------------------------------------+
+
+Like helo_try_verify_hosts, this option is obsolete, and retained only for
+backwards compatibility. For hosts that match this option, Exim checks the host
+name given in the HELO or EHLO in the same way as for helo_try_verify_hosts. If
+the check fails, the HELO or EHLO command is rejected with a 550 error, and
+entries are written to the main and reject logs. If a MAIL command is received
+before EHLO or HELO, it is rejected with a 503 error.
+
++--------------------------------------------------------+
+|hold_domains|Use: main|Type: domain list*|Default: unset|
++--------------------------------------------------------+
+
+This option allows mail for particular domains to be held in the queue
+manually. The option is overridden if a message delivery is forced with the -M,
+-qf, -Rf or -Sf options, and also while testing or verifying addresses using 
+-bt or -bv. Otherwise, if a domain matches an item in hold_domains, no routing
+or delivery for that address is done, and it is deferred every time the message
+is looked at.
+
+This option is intended as a temporary operational measure for delaying the
+delivery of mail while some problem is being sorted out, or some new
+configuration tested. If you just want to delay the processing of some domains
+until a queue run occurs, you should use queue_domains or queue_smtp_domains,
+not hold_domains.
+
+A setting of hold_domains does not override Exim's code for removing messages
+from the queue if they have been there longer than the longest retry time in
+any retry rule. If you want to hold messages for longer than the normal retry
+times, insert a dummy retry rule with a long retry time.
+
++-----------------------------------------------------+
+|host_lookup|Use: main|Type: host list*|Default: unset|
++-----------------------------------------------------+
+
+Exim does not look up the name of a calling host from its IP address unless it
+is required to compare against some host list, or the host matches 
+helo_try_verify_hosts or helo_verify_hosts, or the host matches this option
+(which normally contains IP addresses rather than host names). The default
+configuration file contains
+
+host_lookup = *
+
+which causes a lookup to happen for all hosts. If the expense of these lookups
+is felt to be too great, the setting can be changed or removed.
+
+After a successful reverse lookup, Exim does a forward lookup on the name it
+has obtained, to verify that it yields the IP address that it started with. If
+this check fails, Exim behaves as if the name lookup failed.
+
+After any kind of failure, the host name (in $sender_host_name) remains unset,
+and $host_lookup_failed is set to the string "1". See also 
+dns_again_means_nonexist, helo_lookup_domains, and "verify =
+reverse_host_lookup" in ACLs.
+
++---------------------------------------------------------------------+
+|host_lookup_order|Use: main|Type: string list|Default: "bydns:byaddr"|
++---------------------------------------------------------------------+
+
+This option specifies the order of different lookup methods when Exim is trying
+to find a host name from an IP address. The default is to do a DNS lookup
+first, and then to try a local lookup (using gethostbyaddr() or equivalent) if
+that fails. You can change the order of these lookups, or omit one entirely, if
+you want.
+
+Warning: The "byaddr" method does not always yield aliases when there are
+multiple PTR records in the DNS and the IP address is not listed in /etc/hosts.
+Different operating systems give different results in this case. That is why
+the default tries a DNS lookup first.
+
++----------------------------------------------------------------+
+|host_reject_connection|Use: main|Type: host list*|Default: unset|
++----------------------------------------------------------------+
+
+If this option is set, incoming SMTP calls from the hosts listed are rejected
+as soon as the connection is made. This option is obsolete, and retained only
+for backward compatibility, because nowadays the ACL specified by 
+acl_smtp_connect can also reject incoming connections immediately.
+
+The ability to give an immediate rejection (either by this option or using an
+ACL) is provided for use in unusual cases. Many hosts will just try again,
+sometimes without much delay. Normally, it is better to use an ACL to reject
+incoming messages at a later stage, such as after RCPT commands. See chapter 44
+.
+
++----------------------------------------------------------------+
+|hosts_connection_nolog|Use: main|Type: host list*|Default: unset|
++----------------------------------------------------------------+
+
+This option defines a list of hosts for which connection logging does not
+happen, even though the smtp_connection log selector is set. For example, you
+might want not to log SMTP connections from local processes, or from 127.0.0.1,
+or from your local LAN. This option is consulted in the main loop of the
+daemon; you should therefore strive to restrict its value to a short inline
+list of IP addresses and networks. To disable logging SMTP connections from
+local processes, you must create a host list with an empty item. For example:
+
+hosts_connection_nolog = :
+
+If the smtp_connection log selector is not set, this option has no effect.
+
++------------------------------------------------------------+
+|hosts_require_alpn|Use: main|Type: host list*|Default: unset|
++------------------------------------------------------------+
+
+If the TLS library supports ALPN then a successful negotiation of ALPN will be
+required for any client matching the list, for TLS to be used. See also the 
+tls_alpn option.
+
+Note: prevention of fallback to in-clear connection is not managed by this
+option, and should be done separately.
+
++--------------------------------------------------------+
+|hosts_require_helo|Use: main|Type: host list*|Default: *|
++--------------------------------------------------------+
+
+Exim will require an accepted HELO or EHLO command from a host matching this
+list, before accepting a MAIL command.
+
++-----------------------------------------------------+
+|hosts_proxy|Use: main|Type: host list*|Default: unset|
++-----------------------------------------------------+
+
+This option enables use of Proxy Protocol proxies for incoming connections. For
+details see section 59.1.
+
++----------------------------------------------------------------+
+|hosts_treat_as_local|Use: main|Type: domain list*|Default: unset|
++----------------------------------------------------------------+
+
+If this option is set, any host names that match the domain list are treated as
+if they were the local host when Exim is scanning host lists obtained from MX
+records or other sources. Note that the value of this option is a domain list,
+not a host list, because it is always used to check host names, not IP
+addresses.
+
+This option also applies when Exim is matching the special items "@mx_any",
+"@mx_primary", and "@mx_secondary" in a domain list (see section 10.9), and
+when checking the hosts option in the smtp transport for the local host (see
+the allow_localhost option in that transport). See also local_interfaces, 
+extra_local_interfaces, and chapter 13, which contains a discussion about local
+network interfaces and recognizing the local host.
+
++--------------------------------------------------------+
+|ibase_servers|Use: main|Type: string list|Default: unset|
++--------------------------------------------------------+
+
+This option provides a list of InterBase servers and associated connection
+data, to be used in conjunction with ibase lookups (see section 9.22). The
+option is available only if Exim has been built with InterBase support.
+
++------------------------------------------------------------+
+|ignore_bounce_errors_after|Use: main|Type: time|Default: 10w|
++------------------------------------------------------------+
+
+This option affects the processing of bounce messages that cannot be delivered,
+that is, those that suffer a permanent delivery failure. (Bounce messages that
+suffer temporary delivery failures are of course retried in the usual way.)
+
+After a permanent delivery failure, bounce messages are frozen, because there
+is no sender to whom they can be returned. When a frozen bounce message has
+been in the queue for more than the given time, it is unfrozen at the next
+queue run, and a further delivery is attempted. If delivery fails again, the
+bounce message is discarded. This makes it possible to keep failed bounce
+messages around for a shorter time than the normal maximum retry time for
+frozen messages. For example,
+
+ignore_bounce_errors_after = 12h
+
+retries failed bounce message deliveries after 12 hours, discarding any further
+failures. If the value of this option is set to a zero time period, bounce
+failures are discarded immediately. Setting a very long time (as in the default
+value) has the effect of disabling this option. For ways of automatically
+dealing with other kinds of frozen message, see auto_thaw and 
+timeout_frozen_after.
+
++---------------------------------------------------------------+
+|ignore_fromline_hosts|Use: main|Type: host list*|Default: unset|
++---------------------------------------------------------------+
+
+Some broken SMTP clients insist on sending a UUCP-like "From " line before the
+headers of a message. By default this is treated as the start of the message's
+body, which means that any following headers are not recognized as such. Exim
+can be made to ignore it by setting ignore_fromline_hosts to match those hosts
+that insist on sending it. If the sender is actually a local process rather
+than a remote host, and is using -bs to inject the messages, 
+ignore_fromline_local must be set to achieve this effect.
+
++------------------------------------------------------------+
+|ignore_fromline_local|Use: main|Type: boolean|Default: false|
++------------------------------------------------------------+
+
+See ignore_fromline_hosts above.
+
++-----------------------------------------------------------+
+|keep_environment|Use: main|Type: string list|Default: unset|
++-----------------------------------------------------------+
+
+This option contains a string list of environment variables to keep. You have
+to trust these variables or you have to be sure that these variables do not
+impose any security risk. Keep in mind that during the startup phase Exim is
+running with an effective UID 0 in most installations. As the default value is
+an empty list, the default environment for using libraries, running embedded
+Perl code, or running external binaries is empty, and does not not even contain
+PATH or HOME.
+
+Actually the list is interpreted as a list of patterns (10.1), except that it
+is not expanded first.
+
+WARNING: Macro substitution is still done first, so having a macro FOO and
+having FOO_HOME in your keep_environment option may have unexpected results.
+You may work around this using a regular expression that does not match the
+macro name: ^[F]OO_HOME$.
+
+Current versions of Exim issue a warning during startup if you do not mention 
+keep_environment in your runtime configuration file and if your current
+environment is not empty. Future versions may not issue that warning anymore.
+
+See the add_environment main config option for a way to set environment
+variables to a fixed value. The environment for pipe transports is handled
+separately, see section 29.4 for details.
+
++-----------------------------------------------+
+|keep_malformed|Use: main|Type: time|Default: 4d|
++-----------------------------------------------+
+
+This option specifies the length of time to keep messages whose spool files
+have been corrupted in some way. This should, of course, never happen. At the
+next attempt to deliver such a message, it gets removed. The incident is
+logged.
+
++------------------------------------------------------+
+|ldap_ca_cert_dir|Use: main|Type: string|Default: unset|
++------------------------------------------------------+
+
+This option indicates which directory contains CA certificates for verifying a
+TLS certificate presented by an LDAP server. While Exim does not provide a
+default value, your SSL library may. Analogous to tls_verify_certificates but
+as a client-side option for LDAP and constrained to be a directory.
+
++-------------------------------------------------------+
+|ldap_ca_cert_file|Use: main|Type: string|Default: unset|
++-------------------------------------------------------+
+
+This option indicates which file contains CA certificates for verifying a TLS
+certificate presented by an LDAP server. While Exim does not provide a default
+value, your SSL library may. Analogous to tls_verify_certificates but as a
+client-side option for LDAP and constrained to be a file.
+
++----------------------------------------------------+
+|ldap_cert_file|Use: main|Type: string|Default: unset|
++----------------------------------------------------+
+
+This option indicates which file contains an TLS client certificate which Exim
+should present to the LDAP server during TLS negotiation. Should be used
+together with ldap_cert_key.
+
++---------------------------------------------------+
+|ldap_cert_key|Use: main|Type: string|Default: unset|
++---------------------------------------------------+
+
+This option indicates which file contains the secret/private key to use to
+prove identity to the LDAP server during TLS negotiation. Should be used
+together with ldap_cert_file, which contains the identity to be proven.
+
++-------------------------------------------------------+
+|ldap_cipher_suite|Use: main|Type: string|Default: unset|
++-------------------------------------------------------+
+
+This controls the TLS cipher-suite negotiation during TLS negotiation with the
+LDAP server. See 43.4 for more details of the format of cipher-suite options
+with OpenSSL (as used by LDAP client libraries).
+
++---------------------------------------------------------------+
+|ldap_default_servers|Use: main|Type: string list|Default: unset|
++---------------------------------------------------------------+
+
+This option provides a list of LDAP servers which are tried in turn when an
+LDAP query does not contain a server. See section 9.15 for details of LDAP
+queries. This option is available only when Exim has been built with LDAP
+support.
+
++--------------------------------------------------------+
+|ldap_require_cert|Use: main|Type: string|Default: unset.|
++--------------------------------------------------------+
+
+This should be one of the values "hard", "demand", "allow", "try" or "never". A
+value other than one of these is interpreted as "never". See the entry
+"TLS_REQCERT" in your system man page for ldap.conf(5). Although Exim does not
+set a default, the LDAP library probably defaults to hard/demand.
+
++-----------------------------------------------------+
+|ldap_start_tls|Use: main|Type: boolean|Default: false|
++-----------------------------------------------------+
+
+If set, Exim will attempt to negotiate TLS with the LDAP server when connecting
+on a regular LDAP port. This is the LDAP equivalent of SMTP's "STARTTLS". This
+is distinct from using "ldaps", which is the LDAP form of SSL-on-connect. In
+the event of failure to negotiate TLS, the action taken is controlled by 
+ldap_require_cert. This option is ignored for "ldapi" connections.
+
++---------------------------------------------------+
+|ldap_version|Use: main|Type: integer|Default: unset|
++---------------------------------------------------+
+
+This option can be used to force Exim to set a specific protocol version for
+LDAP. If it option is unset, it is shown by the -bP command line option as -1.
+When this is the case, the default is 3 if LDAP_VERSION3 is defined in the LDAP
+headers; otherwise it is 2. This option is available only when Exim has been
+built with LDAP support.
+
++------------------------------------------------------+
+|local_from_check|Use: main|Type: boolean|Default: true|
++------------------------------------------------------+
+
+When a message is submitted locally (that is, not over a TCP/IP connection) by
+an untrusted user, Exim removes any existing Sender: header line, and checks
+that the From: header line matches the login of the calling user and the domain
+specified by qualify_domain.
+
+Note: An unqualified address (no domain) in the From: header in a locally
+submitted message is automatically qualified by Exim, unless the -bnq command
+line option is used.
+
+You can use local_from_prefix and local_from_suffix to permit affixes on the
+local part. If the From: header line does not match, Exim adds a Sender: header
+with an address constructed from the calling user's login and the default
+qualify domain.
+
+If local_from_check is set false, the From: header check is disabled, and no 
+Sender: header is ever added. If, in addition, you want to retain Sender:
+header lines supplied by untrusted users, you must also set local_sender_retain
+to be true.
+
+These options affect only the header lines in the message. The envelope sender
+is still forced to be the login id at the qualify domain unless 
+untrusted_set_sender permits the user to supply an envelope sender.
+
+For messages received over TCP/IP, an ACL can specify "submission mode" to
+request similar header line checking. See section 48.16, which has more details
+about Sender: processing.
+
++-------------------------------------------------------+
+|local_from_prefix|Use: main|Type: string|Default: unset|
++-------------------------------------------------------+
+
+When Exim checks the From: header line of locally submitted messages for
+matching the login id (see local_from_check above), it can be configured to
+ignore certain prefixes and suffixes in the local part of the address. This is
+done by setting local_from_prefix and/or local_from_suffix to appropriate
+lists, in the same form as the local_part_prefix and local_part_suffix router
+options (see chapter 15). For example, if
+
+local_from_prefix = *-
+
+is set, a From: line containing
+
+From: anything-user@your.domain.example
+
+will not cause a Sender: header to be added if user@your.domain.example matches
+the actual sender address that is constructed from the login name and qualify
+domain.
+
++-------------------------------------------------------+
+|local_from_suffix|Use: main|Type: string|Default: unset|
++-------------------------------------------------------+
+
+See local_from_prefix above.
+
++---------------------------------------------------------------+
+|local_interfaces|Use: main|Type: string list|Default: see below|
++---------------------------------------------------------------+
+
+This option controls which network interfaces are used by the daemon for
+listening; they are also used to identify the local host when routing. Chapter
+13 contains a full description of this option and the related options 
+daemon_smtp_ports, extra_local_interfaces, hosts_treat_as_local, and 
+tls_on_connect_ports. The default value for local_interfaces is
+
+local_interfaces = 0.0.0.0
+
+when Exim is built without IPv6 support; otherwise it is
+
+local_interfaces = <; ::0 ; 0.0.0.0
+
++---------------------------------------------------+
+|local_scan_timeout|Use: main|Type: time|Default: 5m|
++---------------------------------------------------+
+
+This timeout applies to the local_scan() function (see chapter 46). Zero means
+"no timeout". If the timeout is exceeded, the incoming message is rejected with
+a temporary error if it is an SMTP message. For a non-SMTP message, the message
+is dropped and Exim ends with a non-zero code. The incident is logged on the
+main and reject logs.
+
++----------------------------------------------------------+
+|local_sender_retain|Use: main|Type: boolean|Default: false|
++----------------------------------------------------------+
+
+When a message is submitted locally (that is, not over a TCP/IP connection) by
+an untrusted user, Exim removes any existing Sender: header line. If you do not
+want this to happen, you must set local_sender_retain, and you must also set 
+local_from_check to be false (Exim will complain if you do not). See also the
+ACL modifier "control = suppress_local_fixups". Section 48.16 has more details
+about Sender: processing.
+
++-------------------------------------------------------+
+|localhost_number|Use: main|Type: string*|Default: unset|
++-------------------------------------------------------+
+
+Exim's message ids are normally unique only within the local host. If
+uniqueness among a set of hosts is required, each host must set a different
+value for the localhost_number option. The string is expanded immediately after
+reading the configuration file (so that a number can be computed from the host
+name, for example) and the result of the expansion must be a number in the
+range 0-16 (or 0-10 on operating systems with case-insensitive file systems).
+This is available in subsequent string expansions via the variable
+$localhost_number. When localhost_number is set, the final two characters of
+the message id, instead of just being a fractional part of the time, are
+computed from the time and the local host number as described in section 3.4.
+
++-----------------------------------------------------------------------+
+|log_file_path|Use: main|Type: string list*|Default: set at compile time|
++-----------------------------------------------------------------------+
+
+This option sets the path which is used to determine the names of Exim's log
+files, or indicates that logging is to be to syslog, or both. It is expanded
+when Exim is entered, so it can, for example, contain a reference to the host
+name. If no specific path is set for the log files at compile or runtime, or if
+the option is unset at runtime (i.e. "log_file_path = ") they are written in a
+sub-directory called log in Exim's spool directory. A path must start with a
+slash. To send to syslog, use the word "syslog". Chapter 53 contains further
+details about Exim's logging, and section 53.1 describes how the contents of 
+log_file_path are used. If this string is fixed at your installation (contains
+no expansion variables) it is recommended that you do not set this option in
+the configuration file, but instead supply the path using LOG_FILE_PATH in
+Local/Makefile so that it is available to Exim for logging errors detected
+early on - in particular, failure to read the configuration file.
+
++--------------------------------------------------+
+|log_selector|Use: main|Type: string|Default: unset|
++--------------------------------------------------+
+
+This option can be used to reduce or increase the number of things that Exim
+writes to its log files. Its argument is made up of names preceded by plus or
+minus characters. For example:
+
+log_selector = +arguments -retry_defer
+
+A list of possible names and what they control is given in the chapter on
+logging, in section 53.15.
+
++---------------------------------------------------+
+|log_timezone|Use: main|Type: boolean|Default: false|
++---------------------------------------------------+
+
+By default, the timestamps on log lines are in local time without the timezone.
+This means that if your timezone changes twice a year, the timestamps in log
+lines are ambiguous for an hour when the clocks go back. One way of avoiding
+this problem is to set the timezone to UTC. An alternative is to set 
+log_timezone true. This turns on the addition of the timezone offset to
+timestamps in log lines. Turning on this option can add quite a lot to the size
+of log files because each line is extended by 6 characters. Note that the
+$tod_log variable contains the log timestamp without the zone, but there is
+another variable called $tod_zone that contains just the timezone offset.
+
++---------------------------------------------------+
+|lookup_open_max|Use: main|Type: integer|Default: 25|
++---------------------------------------------------+
+
+This option limits the number of simultaneously open files for single-key
+lookups that use regular files (that is, lsearch, dbm, and cdb). Exim normally
+keeps these files open during routing, because often the same file is required
+several times. If the limit is reached, Exim closes the least recently used
+file. Note that if you are using the ndbm library, it actually opens two files
+for each logical DBM database, though it still counts as one for the purposes
+of lookup_open_max. If you are getting "too many open files" errors with NDBM,
+you need to reduce the value of lookup_open_max.
+
++------------------------------------------------------+
+|max_username_length|Use: main|Type: integer|Default: 0|
++------------------------------------------------------+
+
+Some operating systems are broken in that they truncate long arguments to
+getpwnam() to eight characters, instead of returning "no such user". If this
+option is set greater than zero, any attempt to call getpwnam() with an
+argument that is longer behaves as if getpwnam() failed.
+
++---------------------------------------------------------+
+|message_body_newlines|Use: main|Type: bool|Default: false|
++---------------------------------------------------------+
+
+By default, newlines in the message body are replaced by spaces when setting
+the $message_body and $message_body_end expansion variables. If this option is
+set true, this no longer happens.
+
++---------------------------------------------------------+
+|message_body_visible|Use: main|Type: integer|Default: 500|
++---------------------------------------------------------+
+
+This option specifies how much of a message's body is to be included in the
+$message_body and $message_body_end expansion variables.
+
++---------------------------------------------------------------+
+|message_id_header_domain|Use: main|Type: string*|Default: unset|
++---------------------------------------------------------------+
+
+If this option is set, the string is expanded and used as the right hand side
+(domain) of the Message-ID: header that Exim creates if a locally-originated
+incoming message does not have one. "Locally-originated" means "not received
+over TCP/IP." Otherwise, the primary host name is used. Only letters, digits,
+dot and hyphen are accepted; any other characters are replaced by hyphens. If
+the expansion is forced to fail, or if the result is an empty string, the
+option is ignored.
+
++-------------------------------------------------------------+
+|message_id_header_text|Use: main|Type: string*|Default: unset|
++-------------------------------------------------------------+
+
+If this variable is set, the string is expanded and used to augment the text of
+the Message-id: header that Exim creates if a locally-originated incoming
+message does not have one. The text of this header is required by RFC 2822 to
+take the form of an address. By default, Exim uses its internal message id as
+the local part, and the primary host name as the domain. If this option is set,
+it is expanded, and provided the expansion is not forced to fail, and does not
+yield an empty string, the result is inserted into the header immediately
+before the @, separated from the internal message id by a dot. Any characters
+that are illegal in an address are automatically converted into hyphens. This
+means that variables such as $tod_log can be used, because the spaces and
+colons will become hyphens.
+
++--------------------------------------------------+
+|message_logs|Use: main|Type: boolean|Default: true|
++--------------------------------------------------+
+
+If this option is turned off, per-message log files are not created in the
+msglog spool sub-directory. This reduces the amount of disk I/O required by
+Exim, by reducing the number of files involved in handling a message from a
+minimum of four (header spool file, body spool file, delivery journal, and
+per-message log) to three. The other major I/O activity is Exim's main log,
+which is not affected by this option.
+
++-------------------------------------------------------+
+|message_size_limit|Use: main|Type: string*|Default: 50M|
++-------------------------------------------------------+
+
+This option limits the maximum size of message that Exim will process. The
+value is expanded for each incoming connection so, for example, it can be made
+to depend on the IP address of the remote host for messages arriving via TCP/
+IP. After expansion, the value must be a sequence of decimal digits, optionally
+followed by K or M.
+
+If nonzero the value will be advertised as a parameter to the ESMTP SIZE
+service extension keyword.
+
+Note: This limit cannot be made to depend on a message's sender or any other
+properties of an individual message, because it has to be advertised in the
+server's response to EHLO. String expansion failure causes a temporary error. A
+value of zero means no limit, but its use is not recommended. See also 
+bounce_return_size_limit.
+
+Incoming SMTP messages are failed with a 552 error if the limit is exceeded;
+locally-generated messages either get a stderr message or a delivery failure
+message to the sender, depending on the -oe setting. Rejection of an oversized
+message is logged in both the main and the reject logs. See also the generic
+transport option message_size_limit, which limits the size of message that an
+individual transport can process.
+
+If you use a virus-scanner and set this option to to a value larger than the
+maximum size that your virus-scanner is configured to support, you may get
+failures triggered by large mails. The right size to configure for the
+virus-scanner depends upon what data is passed and the options in use but it's
+probably safest to just set it to a little larger than this value. E.g., with a
+default Exim message size of 50M and a default ClamAV StreamMaxLength of 10M,
+some problems may result.
+
+A value of 0 will disable size limit checking; Exim will still advertise the
+SIZE extension in an EHLO response, but without a limit, so as to permit SMTP
+clients to still indicate the message size along with the MAIL verb.
+
++-----------------------------------------------------------+
+|move_frozen_messages|Use: main|Type: boolean|Default: false|
++-----------------------------------------------------------+
+
+This option, which is available only if Exim has been built with the setting
+
+SUPPORT_MOVE_FROZEN_MESSAGES=yes
+
+in Local/Makefile, causes frozen messages and their message logs to be moved
+from the input and msglog directories on the spool to Finput and Fmsglog,
+respectively. There is currently no support in Exim or the standard utilities
+for handling such moved messages, and they do not show up in lists generated by
+-bp or by the Exim monitor.
+
++--------------------------------------------------+
+|mua_wrapper|Use: main|Type: boolean|Default: false|
++--------------------------------------------------+
+
+Setting this option true causes Exim to run in a very restrictive mode in which
+it passes messages synchronously to a smart host. Chapter 52 contains a full
+description of this facility.
+
++--------------------------------------------------------+
+|mysql_servers|Use: main|Type: string list|Default: unset|
++--------------------------------------------------------+
+
+This option provides a list of MySQL servers and associated connection data, to
+be used in conjunction with mysql lookups (see section 9.22). The option is
+available only if Exim has been built with MySQL support.
+
++-------------------------------------------------------+
+|never_users|Use: main|Type: string list*|Default: unset|
++-------------------------------------------------------+
+
+This option is expanded just once, at the start of Exim's processing. Local
+message deliveries are normally run in processes that are setuid to the
+recipient, and remote deliveries are normally run under Exim's own uid and gid.
+It is usually desirable to prevent any deliveries from running as root, as a
+safety precaution.
+
+When Exim is built, an option called FIXED_NEVER_USERS can be set to a list of
+users that must not be used for local deliveries. This list is fixed in the
+binary and cannot be overridden by the configuration file. By default, it
+contains just the single user name "root". The never_users runtime option can
+be used to add more users to the fixed list.
+
+If a message is to be delivered as one of the users on the fixed list or the 
+never_users list, an error occurs, and delivery is deferred. A common example
+is
+
+never_users = root:daemon:bin
+
+Including root is redundant if it is also on the fixed list, but it does no
+harm. This option overrides the pipe_as_creator option of the pipe transport
+driver.
+
++-----------------------------------------------------------------------------+
+|notifier_socket| Use:   |  Type:    |              Default: $spool_directory/|
+|               |  main  |  string   |                      exim_daemon_notify|
++-----------------------------------------------------------------------------+
+
+This option gives the name for a unix-domain socket on which the daemon listens
+for work and information-requests. Only installations running multiple daemons
+sharing a spool directory should need to modify the default.
+
+The option is expanded before use. If the platform supports Linux-style
+abstract socket names, the result is used with a nul byte prefixed. Otherwise,
+it should be a full path name and use a directory accessible to Exim.
+
+If this option is set as empty, or the command line -oY option is used, or the
+command line uses a -oX option and does not use -oP, then a notifier socket is
+not created.
+
++-----------------------------------------------------------------------------+
+|               |Use:  |  Type:   |Default: +no_sslv2 +no_sslv3 +single_dh_use|
+|openssl_options| main |  string  |               +no_ticket +no_renegotiation|
+|               |      |   list   |                                           |
++-----------------------------------------------------------------------------+
+
+This option allows an administrator to adjust the SSL options applied by
+OpenSSL to connections. It is given as a space-separated list of items, each
+one to be +added or -subtracted from the current value.
+
+This option is only available if Exim is built against OpenSSL. The values
+available for this option vary according to the age of your OpenSSL install.
+The "all" value controls a subset of flags which are available, typically the
+bug workaround options. The SSL_CTX_set_options man page will list the values
+known on your system and Exim should support all the "bug workaround" options
+and many of the "modifying" options. The Exim names lose the leading "SSL_OP_"
+and are lower-cased.
+
+Note that adjusting the options can have severe impact upon the security of SSL
+as used by Exim. It is possible to disable safety checks and shoot yourself in
+the foot in various unpleasant ways. This option should not be adjusted
+lightly. An unrecognised item will be detected at startup, by invoking Exim
+with the -bV flag.
+
+The option affects Exim operating both as a server and as a client.
+
+Historical note: prior to release 4.80, Exim defaulted this value to
+"+dont_insert_empty_fragments", which may still be needed for compatibility
+with some clients, but which lowers security by increasing exposure to some now
+infamous attacks.
+
+Examples:
+
+# Make both old MS and old Eudora happy:
+openssl_options = -all +microsoft_big_sslv3_buffer \
+                       +dont_insert_empty_fragments
+
+# Disable older protocol versions:
+openssl_options = +no_sslv2 +no_sslv3
+
+Possible options may include:
+
+  * "all"
+
+  * "allow_unsafe_legacy_renegotiation"
+
+  * "cipher_server_preference"
+
+  * "dont_insert_empty_fragments"
+
+  * "ephemeral_rsa"
+
+  * "legacy_server_connect"
+
+  * "microsoft_big_sslv3_buffer"
+
+  * "microsoft_sess_id_bug"
+
+  * "msie_sslv2_rsa_padding"
+
+  * "netscape_challenge_bug"
+
+  * "netscape_reuse_cipher_change_bug"
+
+  * "no_compression"
+
+  * "no_session_resumption_on_renegotiation"
+
+  * "no_sslv2"
+
+  * "no_sslv3"
+
+  * "no_ticket"
+
+  * "no_tlsv1"
+
+  * "no_tlsv1_1"
+
+  * "no_tlsv1_2"
+
+  * "safari_ecdhe_ecdsa_bug"
+
+  * "single_dh_use"
+
+  * "single_ecdh_use"
+
+  * "ssleay_080_client_dh_bug"
+
+  * "sslref2_reuse_cert_type_bug"
+
+  * "tls_block_padding_bug"
+
+  * "tls_d5_bug"
+
+  * "tls_rollback_bug"
+
+As an aside, the "safari_ecdhe_ecdsa_bug" item is a misnomer and affects all
+clients connecting using the MacOS SecureTransport TLS facility prior to MacOS
+10.8.4, including email clients. If you see old MacOS clients failing to
+negotiate TLS then this option value might help, provided that your OpenSSL
+release is new enough to contain this work-around. This may be a situation
+where you have to upgrade OpenSSL to get buggy clients working.
+
++---------------------------------------------------------+
+|oracle_servers|Use: main|Type: string list|Default: unset|
++---------------------------------------------------------+
+
+This option provides a list of Oracle servers and associated connection data,
+to be used in conjunction with oracle lookups (see section 9.22). The option is
+available only if Exim has been built with Oracle support.
+
++----------------------------------------------------------------+
+|percent_hack_domains|Use: main|Type: domain list*|Default: unset|
++----------------------------------------------------------------+
+
+The "percent hack" is the convention whereby a local part containing a percent
+sign is re-interpreted as a new email address, with the percent replaced by @.
+This is sometimes called "source routing", though that term is also applied to
+RFC 2822 addresses that begin with an @ character. If this option is set, Exim
+implements the percent facility for those domains listed, but no others. This
+happens before an incoming SMTP address is tested against an ACL.
+
+Warning: The "percent hack" has often been abused by people who are trying to
+get round relaying restrictions. For this reason, it is best avoided if at all
+possible. Unfortunately, a number of less security-conscious MTAs implement it
+unconditionally. If you are running Exim on a gateway host, and routing mail
+through to internal MTAs without processing the local parts, it is a good idea
+to reject recipient addresses with percent characters in their local parts.
+Exim's default configuration does this.
+
++----------------------------------------------------+
+|perl_at_start|Use: main|Type: boolean|Default: false|
++----------------------------------------------------+
+
+This option is available only when Exim is built with an embedded Perl
+interpreter. See chapter 12 for details of its use.
+
++--------------------------------------------------+
+|perl_startup|Use: main|Type: string|Default: unset|
++--------------------------------------------------+
+
+This option is available only when Exim is built with an embedded Perl
+interpreter. See chapter 12 for details of its use.
+
++-----------------------------------------------------+
+|perl_taintmode|Use: main|Type: boolean|Default: false|
++-----------------------------------------------------+
+
+This option enables the taint mode of the embedded Perl interpreter.
+
++--------------------------------------------------------+
+|pgsql_servers|Use: main|Type: string list|Default: unset|
++--------------------------------------------------------+
+
+This option provides a list of PostgreSQL servers and associated connection
+data, to be used in conjunction with pgsql lookups (see section 9.22). The
+option is available only if Exim has been built with PostgreSQL support.
+
++------------------------------------------------------------------+
+|pid_file_path|Use: main|Type: string*|Default: set at compile time|
++------------------------------------------------------------------+
+
+This option sets the name of the file to which the Exim daemon writes its
+process id. The string is expanded, so it can contain, for example, references
+to the host name:
+
+pid_file_path = /var/log/$primary_hostname/exim.pid
+
+If no path is set, the pid is written to the file exim-daemon.pid in Exim's
+spool directory. The value set by the option can be overridden by the -oP
+command line option. A pid file is not written if a "non-standard" daemon is
+run by means of the -oX option, unless a path is explicitly supplied by -oP.
+
++----------------------------------------------------------------+
+|pipelining_advertise_hosts|Use: main|Type: host list*|Default: *|
++----------------------------------------------------------------+
+
+This option can be used to suppress the advertisement of the SMTP PIPELINING
+extension to specific hosts. See also the no_pipelining control in section
+44.22. When PIPELINING is not advertised and smtp_enforce_sync is true, an Exim
+server enforces strict synchronization for each SMTP command and response. When
+PIPELINING is advertised, Exim assumes that clients will use it; "out of order"
+commands that are "expected" do not count as protocol errors (see 
+smtp_max_synprot_errors).
+
++------------------------------------------------------------------------+
+|pipelining_connect_advertise_hosts|Use: main|Type: host list*|Default: *|
++------------------------------------------------------------------------+
+
+If Exim is built without the DISABLE_PIPE_CONNECT build option this option
+controls which hosts the facility is advertised to and from which pipeline
+early-connection (before MAIL) SMTP commands are acceptable. When used, the
+pipelining saves on roundtrip times.
+
+See also the hosts_pipe_connect smtp transport option.
+
+The SMTP service extension keyword advertised is "PIPECONNECT"; it permits the
+client to pipeline TCP connection and hello command (inclear phase), or
+TLS-establishment and hello command (encrypted phase), on later connections to
+the same host.
+
++--------------------------------------------------+
+|prdr_enable|Use: main|Type: boolean|Default: false|
++--------------------------------------------------+
+
+This option can be used to enable the Per-Recipient Data Response extension to
+SMTP, defined by Eric Hall. If the option is set, PRDR is advertised by Exim
+when operating as a server. If the client requests PRDR, and more than one
+recipient, for a message an additional ACL is called for each recipient after
+the message content is received. See section 44.9.
+
++------------------------------------------------------------+
+|preserve_message_logs|Use: main|Type: boolean|Default: false|
++------------------------------------------------------------+
+
+If this option is set, message log files are not deleted when messages are
+completed. Instead, they are moved to a sub-directory of the spool directory
+called msglog.OLD, where they remain available for statistical or debugging
+purposes. This is a dangerous option to set on systems with any appreciable
+volume of mail. Use with care!
+
++----------------------------------------------------------+
+|primary_hostname|Use: main|Type: string|Default: see below|
++----------------------------------------------------------+
+
+This specifies the name of the current host. It is used in the default EHLO or
+HELO command for outgoing SMTP messages (changeable via the helo_data option in
+the smtp transport), and as the default for qualify_domain. The value is also
+used by default in some SMTP response messages from an Exim server. This can be
+changed dynamically by setting smtp_active_hostname.
+
+If primary_hostname is not set, Exim calls uname() to find the host name. If
+this fails, Exim panics and dies. If the name returned by uname() contains only
+one component, Exim passes it to gethostbyname() (or getipnodebyname() when
+available) in order to obtain the fully qualified version. The variable
+$primary_hostname contains the host name, whether set explicitly by this
+option, or defaulted.
+
++--------------------------------------------------------+
+|print_topbitchars|Use: main|Type: boolean|Default: false|
++--------------------------------------------------------+
+
+By default, Exim considers only those characters whose codes lie in the range
+32-126 to be printing characters. In a number of circumstances (for example,
+when writing log entries) non-printing characters are converted into escape
+sequences, primarily to avoid messing up the layout. If print_topbitchars is
+set, code values of 128 and above are also considered to be printing
+characters.
+
+This option also affects the header syntax checks performed by the autoreply
+transport, and whether Exim uses RFC 2047 encoding of the user's full name when
+constructing From: and Sender: addresses (as described in section 48.18).
+Setting this option can cause Exim to generate eight bit message headers that
+do not conform to the standards.
+
++------------------------------------------------------+
+|process_log_path|Use: main|Type: string|Default: unset|
++------------------------------------------------------+
+
+This option sets the name of the file to which an Exim process writes its
+"process log" when sent a USR1 signal. This is used by the exiwhat utility
+script. If this option is unset, the file called exim-process.info in Exim's
+spool directory is used. The ability to specify the name explicitly can be
+useful in environments where two different Exims are running, using different
+spool directories.
+
++---------------------------------------------------------+
+|prod_requires_admin|Use: main|Type: boolean|Default: true|
++---------------------------------------------------------+
+
+The -M, -R, and -q command-line options require the caller to be an admin user
+unless prod_requires_admin is set false. See also queue_list_requires_admin and
+commandline_checks_require_admin.
+
++-------------------------------------------------------+
+|proxy_protocol_timeout|Use: main|Type: time|Default: 3s|
++-------------------------------------------------------+
+
+This option sets the timeout for proxy protocol negotiation. For details see
+section 59.1.
+
++--------------------------------------------------------+
+|qualify_domain|Use: main|Type: string|Default: see below|
++--------------------------------------------------------+
+
+This option specifies the domain name that is added to any envelope sender
+addresses that do not have a domain qualification. It also applies to recipient
+addresses if qualify_recipient is not set. Unqualified addresses are accepted
+by default only for locally-generated messages. Qualification is also applied
+to addresses in header lines such as From: and To: for locally-generated
+messages, unless the -bnq command line option is used.
+
+Messages from external sources must always contain fully qualified addresses,
+unless the sending host matches sender_unqualified_hosts or 
+recipient_unqualified_hosts (as appropriate), in which case incoming addresses
+are qualified with qualify_domain or qualify_recipient as necessary.
+Internally, Exim always works with fully qualified envelope addresses. If 
+qualify_domain is not set, it defaults to the primary_hostname value.
+
++-----------------------------------------------------------+
+|qualify_recipient|Use: main|Type: string|Default: see below|
++-----------------------------------------------------------+
+
+This option allows you to specify a different domain for qualifying recipient
+addresses to the one that is used for senders. See qualify_domain above.
+
++---------------------------------------------------------+
+|queue_domains|Use: main|Type: domain list*|Default: unset|
++---------------------------------------------------------+
+
+This option lists domains for which immediate delivery is not required. A
+delivery process is started whenever a message is received, but only those
+domains that do not match are processed. All other deliveries wait until the
+next queue run. See also hold_domains and queue_smtp_domains.
+
++------------------------------------------------------+
+|queue_fast_ramp|Use: main|Type: boolean|Default: false|
++------------------------------------------------------+
+
+If set to true, two-phase queue runs, initiated using -qq on the command line,
+may start parallel delivery processes during their first phase. This will be
+done when a threshold number of messages have been routed for a single host.
+
++---------------------------------------------------------------+
+|queue_list_requires_admin|Use: main|Type: boolean|Default: true|
++---------------------------------------------------------------+
+
+The -bp command-line option, which lists the messages that are on the queue,
+requires the caller to be an admin user unless queue_list_requires_admin is set
+false. See also prod_requires_admin and commandline_checks_require_admin.
+
++-------------------------------------------------+
+|queue_only|Use: main|Type: boolean|Default: false|
++-------------------------------------------------+
+
+If queue_only is set, a delivery process is not automatically started whenever
+a message is received. Instead, the message waits in the queue for the next
+queue run. Even if queue_only is false, incoming messages may not get delivered
+immediately when certain conditions (such as heavy load) occur.
+
+The -odq command line has the same effect as queue_only. The -odb and -odi
+command line options override queue_only unless queue_only_override is set
+false. See also queue_only_file, queue_only_load, and smtp_accept_queue.
+
++-----------------------------------------------------+
+|queue_only_file|Use: main|Type: string|Default: unset|
++-----------------------------------------------------+
+
+This option can be set to a colon-separated list of absolute path names, each
+one optionally preceded by "smtp". When Exim is receiving a message, it tests
+for the existence of each listed path using a call to stat(). For each path
+that exists, the corresponding queueing option is set. For paths with no
+prefix, queue_only is set; for paths prefixed by "smtp", queue_smtp_domains is
+set to match all domains. So, for example,
+
+queue_only_file = smtp/some/file
+
+causes Exim to behave as if queue_smtp_domains were set to "*" whenever /some/
+file exists.
+
++----------------------------------------------------------+
+|queue_only_load|Use: main|Type: fixed-point|Default: unset|
++----------------------------------------------------------+
+
+If the system load average is higher than this value, incoming messages from
+all sources are queued, and no automatic deliveries are started. If this
+happens during local or remote SMTP input, all subsequent messages received on
+the same SMTP connection are queued by default, whatever happens to the load in
+the meantime, but this can be changed by setting queue_only_load_latch false.
+
+Deliveries will subsequently be performed by queue runner processes. This
+option has no effect on ancient operating systems on which Exim cannot
+determine the load average. See also deliver_queue_load_max and 
+smtp_load_reserve.
+
++-----------------------------------------------------------+
+|queue_only_load_latch|Use: main|Type: boolean|Default: true|
++-----------------------------------------------------------+
+
+When this option is true (the default), once one message has been queued
+because the load average is higher than the value set by queue_only_load, all
+subsequent messages received on the same SMTP connection are also queued. This
+is a deliberate choice; even though the load average may fall below the
+threshold, it doesn't seem right to deliver later messages on the same
+connection when not delivering earlier ones. However, there are special
+circumstances such as very long-lived connections from scanning appliances
+where this is not the best strategy. In such cases, queue_only_load_latch
+should be set false. This causes the value of the load average to be
+re-evaluated for each message.
+
++---------------------------------------------------------+
+|queue_only_override|Use: main|Type: boolean|Default: true|
++---------------------------------------------------------+
+
+When this option is true, the -odx command line options override the setting of
+queue_only or queue_only_file in the configuration file. If queue_only_override
+is set false, the -odx options cannot be used to override; they are accepted,
+but ignored.
+
++---------------------------------------------------------+
+|queue_run_in_order|Use: main|Type: boolean|Default: false|
++---------------------------------------------------------+
+
+If this option is set, queue runs happen in order of message arrival instead of
+in an arbitrary order. For this to happen, a complete list of the entire queue
+must be set up before the deliveries start. When the queue is all held in a
+single directory (the default), a single list is created for both the ordered
+and the non-ordered cases. However, if split_spool_directory is set, a single
+list is not created when queue_run_in_order is false. In this case, the
+sub-directories are processed one at a time (in a random order), and this
+avoids setting up one huge list for the whole queue. Thus, setting 
+queue_run_in_order with split_spool_directory may degrade performance when the
+queue is large, because of the extra work in setting up the single, large list.
+In most situations, queue_run_in_order should not be set.
+
++-------------------------------------------------+
+|queue_run_max|Use: main|Type: integer*|Default: 5|
++-------------------------------------------------+
+
+This controls the maximum number of queue runner processes that an Exim daemon
+can run simultaneously. This does not mean that it starts them all at once, but
+rather that if the maximum number are still running when the time comes to
+start another one, it refrains from starting another one. This can happen with
+very large queues and/or very sluggish deliveries. This option does not,
+however, interlock with other processes, so additional queue runners can be
+started by other means, or by killing and restarting the daemon.
+
+Setting this option to zero does not suppress queue runs; rather, it disables
+the limit, allowing any number of simultaneous queue runner processes to be
+run. If you do not want queue runs to occur, omit the -qxx setting on the
+daemon's command line.
+
+To set limits for different named queues use an expansion depending on the
+$queue_name variable.
+
++--------------------------------------------------------------+
+|queue_smtp_domains|Use: main|Type: domain list*|Default: unset|
++--------------------------------------------------------------+
+
+When this option is set, a delivery process is started whenever a message is
+received, routing is performed, and local deliveries take place. However, if
+any SMTP deliveries are required for domains that match queue_smtp_domains,
+they are not immediately delivered, but instead the message waits in the queue
+for the next queue run. Since routing of the message has taken place, Exim
+knows to which remote hosts it must be delivered, and so when the queue run
+happens, multiple messages for the same host are delivered over a single SMTP
+connection. The -odqs command line option causes all SMTP deliveries to be
+queued in this way, and is equivalent to setting queue_smtp_domains to "*". See
+also hold_domains and queue_domains.
+
++------------------------------------------------+
+|receive_timeout|Use: main|Type: time|Default: 0s|
++------------------------------------------------+
+
+This option sets the timeout for accepting a non-SMTP message, that is, the
+maximum time that Exim waits when reading a message on the standard input. If
+the value is zero, it will wait forever. This setting is overridden by the -or
+command line option. The timeout for incoming SMTP messages is controlled by 
+smtp_receive_timeout.
+
++---------------------------------------------------------------+
+|received_header_text|Use: main|Type: string*|Default: see below|
++---------------------------------------------------------------+
+
+This string defines the contents of the Received: message header that is added
+to each message, except for the timestamp, which is automatically added on at
+the end (preceded by a semicolon). The string is expanded each time it is used.
+If the expansion yields an empty string, no Received: header line is added to
+the message. Otherwise, the string should start with the text "Received:" and
+conform to the RFC 2822 specification for Received: header lines. The default
+setting is:
+
+received_header_text = Received: \
+  ${if def:sender_rcvhost {from $sender_rcvhost\n\t}\
+    {${if def:sender_ident \
+      {from ${quote_local_part:$sender_ident} }}\
+        ${if def:sender_helo_name {(helo=$sender_helo_name)\n\t}}}}\
+  by $primary_hostname \
+  ${if def:received_protocol {with $received_protocol }}\
+  ${if def:tls_in_ver        { ($tls_in_ver)}}\
+  ${if def:tls_in_cipher_std { tls $tls_in_cipher_std\n\t}}\
+  (Exim $version_number)\n\t\
+  ${if def:sender_address \
+  {(envelope-from <$sender_address>)\n\t}}\
+  id $message_exim_id\
+  ${if def:received_for {\n\tfor $received_for}}
+
+The references to the TLS version and cipher are omitted when Exim is built
+without TLS support. The use of conditional expansions ensures that this works
+for both locally generated messages and messages received from remote hosts,
+giving header lines such as the following:
+
+Received: from scrooge.carol.example ([192.168.12.25] ident=root)
+by marley.carol.example with esmtp (Exim 4.00)
+(envelope-from <bob@carol.example>)
+id 16IOWa-00019l-00
+for chas@dickens.example; Tue, 25 Dec 2001 14:43:44 +0000
+Received: by scrooge.carol.example with local (Exim 4.00)
+id 16IOWW-000083-00; Tue, 25 Dec 2001 14:43:41 +0000
+
+Until the body of the message has been received, the timestamp is the time when
+the message started to be received. Once the body has arrived, and all policy
+checks have taken place, the timestamp is updated to the time at which the
+message was accepted.
+
++--------------------------------------------------------+
+|received_headers_max|Use: main|Type: integer|Default: 30|
++--------------------------------------------------------+
+
+When a message is to be delivered, the number of Received: headers is counted,
+and if it is greater than this parameter, a mail loop is assumed to have
+occurred, the delivery is abandoned, and an error message is generated. This
+applies to both local and remote deliveries.
+
++---------------------------------------------------------------------+
+|recipient_unqualified_hosts|Use: main|Type: host list*|Default: unset|
++---------------------------------------------------------------------+
+
+This option lists those hosts from which Exim is prepared to accept unqualified
+recipient addresses in message envelopes. The addresses are made fully
+qualified by the addition of the qualify_recipient value. This option also
+affects message header lines. Exim does not reject unqualified recipient
+addresses in headers, but it qualifies them only if the message came from a
+host that matches recipient_unqualified_hosts, or if the message was submitted
+locally (not using TCP/IP), and the -bnq option was not set.
+
++-----------------------------------------------------+
+|recipients_max|Use: main|Type: integer|Default: 50000|
++-----------------------------------------------------+
+
+If this option is set greater than zero, it specifies the maximum number of
+original recipients for any message. Additional recipients that are generated
+by aliasing or forwarding do not count. SMTP messages get a 452 response for
+all recipients over the limit; earlier recipients are delivered as normal.
+Non-SMTP messages with too many recipients are failed, and no deliveries are
+done.
+
+Note: The RFCs specify that an SMTP server should accept at least 100 RCPT
+commands in a single message.
+
++------------------------------------------------------------+
+|recipients_max_reject|Use: main|Type: boolean|Default: false|
++------------------------------------------------------------+
+
+If this option is set true, Exim rejects SMTP messages containing too many
+recipients by giving 552 errors to the surplus RCPT commands, and a 554 error
+to the eventual DATA command. Otherwise (the default) it gives a 452 error to
+the surplus RCPT commands and accepts the message on behalf of the initial set
+of recipients. The remote server should then re-send the message for the
+remaining recipients at a later time.
+
++------------------------------------------------------+
+|remote_max_parallel|Use: main|Type: integer|Default: 2|
++------------------------------------------------------+
+
+This option controls parallel delivery of one message to a number of remote
+hosts. If the value is less than 2, parallel delivery is disabled, and Exim
+does all the remote deliveries for a message one by one. Otherwise, if a single
+message has to be delivered to more than one remote host, or if several copies
+have to be sent to the same remote host, up to remote_max_parallel deliveries
+are done simultaneously. If more than remote_max_parallel deliveries are
+required, the maximum number of processes are started, and as each one
+finishes, another is begun. The order of starting processes is the same as if
+sequential delivery were being done, and can be controlled by the 
+remote_sort_domains option. If parallel delivery takes place while running with
+debugging turned on, the debugging output from each delivery process is tagged
+with its process id.
+
+This option controls only the maximum number of parallel deliveries for one
+message in one Exim delivery process. Because Exim has no central queue
+manager, there is no way of controlling the total number of simultaneous
+deliveries if the configuration allows a delivery attempt as soon as a message
+is received.
+
+See also the max_parallel generic transport option, and the serialize_hosts
+smtp transport option.
+
+If you want to control the total number of deliveries on the system, you need
+to set the queue_only option. This ensures that all incoming messages are added
+to the queue without starting a delivery process. Then set up an Exim daemon to
+start queue runner processes at appropriate intervals (probably fairly often,
+for example, every minute), and limit the total number of queue runners by
+setting the queue_run_max parameter. Because each queue runner delivers only
+one message at a time, the maximum number of deliveries that can then take
+place at once is queue_run_max multiplied by remote_max_parallel.
+
+If it is purely remote deliveries you want to control, use queue_smtp_domains
+instead of queue_only. This has the added benefit of doing the SMTP routing
+before queueing, so that several messages for the same host will eventually get
+delivered down the same connection.
+
++---------------------------------------------------------------+
+|remote_sort_domains|Use: main|Type: domain list*|Default: unset|
++---------------------------------------------------------------+
+
+When there are a number of remote deliveries for a message, they are sorted by
+domain into the order given by this list. For example,
+
+remote_sort_domains = *.cam.ac.uk:*.uk
+
+would attempt to deliver to all addresses in the cam.ac.uk domain first, then
+to those in the uk domain, then to any others.
+
++--------------------------------------------------+
+|retry_data_expire|Use: main|Type: time|Default: 7d|
++--------------------------------------------------+
+
+This option sets a "use before" time on retry information in Exim's hints
+database. Any older retry data is ignored. This means that, for example, once a
+host has not been tried for 7 days, Exim behaves as if it has no knowledge of
+past failures.
+
++----------------------------------------------------+
+|retry_interval_max|Use: main|Type: time|Default: 24h|
++----------------------------------------------------+
+
+Chapter 32 describes Exim's mechanisms for controlling the intervals between
+delivery attempts for messages that cannot be delivered straight away. This
+option sets an overall limit to the length of time between retries. It cannot
+be set greater than 24 hours; any attempt to do so forces the default value.
+
++--------------------------------------------------------+
+|return_path_remove|Use: main|Type: boolean|Default: true|
++--------------------------------------------------------+
+
+RFC 2821, section 4.4, states that an SMTP server must insert a Return-path:
+header line into a message when it makes a "final delivery". The Return-path:
+header preserves the sender address as received in the MAIL command. This
+description implies that this header should not be present in an incoming
+message. If return_path_remove is true, any existing Return-path: headers are
+removed from messages at the time they are received. Exim's transports have
+options for adding Return-path: headers at the time of delivery. They are
+normally used only for final local deliveries.
+
++-------------------------------------------------------+
+|return_size_limit|Use: main|Type: integer|Default: 100K|
++-------------------------------------------------------+
+
+This option is an obsolete synonym for bounce_return_size_limit.
+
++-----------------------------------------------------+
+|rfc1413_hosts|Use: main|Type: host list*|Default: @[]|
++-----------------------------------------------------+
+
+RFC 1413 identification calls are made to any client host which matches an item
+in the list. The default value specifies just this host, being any local
+interface for the system.
+
++------------------------------------------------------+
+|rfc1413_query_timeout|Use: main|Type: time|Default: 0s|
++------------------------------------------------------+
+
+This sets the timeout on RFC 1413 identification calls. If it is set to zero,
+no RFC 1413 calls are ever made.
+
++------------------------------------------------------------------+
+|sender_unqualified_hosts|Use: main|Type: host list*|Default: unset|
++------------------------------------------------------------------+
+
+This option lists those hosts from which Exim is prepared to accept unqualified
+sender addresses. The addresses are made fully qualified by the addition of 
+qualify_domain. This option also affects message header lines. Exim does not
+reject unqualified addresses in headers that contain sender addresses, but it
+qualifies them only if the message came from a host that matches 
+sender_unqualified_hosts, or if the message was submitted locally (not using
+TCP/IP), and the -bnq option was not set.
+
++--------------------------------------------------+
+|slow_lookup_log|Use: main|Type: integer|Default: 0|
++--------------------------------------------------+
+
+This option controls logging of slow lookups. If the value is nonzero it is
+taken as a number of milliseconds and lookups taking longer than this are
+logged. Currently this applies only to DNS lookups.
+
++-----------------------------------------------------------+
+|smtp_accept_keepalive|Use: main|Type: boolean|Default: true|
++-----------------------------------------------------------+
+
+This option controls the setting of the SO_KEEPALIVE option on incoming TCP/IP
+socket connections. When set, it causes the kernel to probe idle connections
+periodically, by sending packets with "old" sequence numbers. The other end of
+the connection should send an acknowledgment if the connection is still okay or
+a reset if the connection has been aborted. The reason for doing this is that
+it has the beneficial effect of freeing up certain types of connection that can
+get stuck when the remote host is disconnected without tidying up the TCP/IP
+call properly. The keepalive mechanism takes several hours to detect
+unreachable hosts.
+
++---------------------------------------------------+
+|smtp_accept_max|Use: main|Type: integer|Default: 20|
++---------------------------------------------------+
+
+This option specifies the maximum number of simultaneous incoming SMTP calls
+that Exim will accept. It applies only to the listening daemon; there is no
+control (in Exim) when incoming SMTP is being handled by inetd. If the value is
+set to zero, no limit is applied. However, it is required to be non-zero if
+either smtp_accept_max_per_host or smtp_accept_queue is set. See also 
+smtp_accept_reserve and smtp_load_reserve.
+
+A new SMTP connection is immediately rejected if the smtp_accept_max limit has
+been reached. If not, Exim first checks smtp_accept_max_per_host. If that limit
+has not been reached for the client host, smtp_accept_reserve and 
+smtp_load_reserve are then checked before accepting the connection.
+
++-----------------------------------------------------------+
+|smtp_accept_max_nonmail|Use: main|Type: integer|Default: 10|
++-----------------------------------------------------------+
+
+Exim counts the number of "non-mail" commands in an SMTP session, and drops the
+connection if there are too many. This option defines "too many". The check
+catches some denial-of-service attacks, repeated failing AUTHs, or a mad client
+looping sending EHLO, for example. The check is applied only if the client host
+matches smtp_accept_max_nonmail_hosts.
+
+When a new message is expected, one occurrence of RSET is not counted. This
+allows a client to send one RSET between messages (this is not necessary, but
+some clients do it). Exim also allows one uncounted occurrence of HELO or EHLO,
+and one occurrence of STARTTLS between messages. After starting up a TLS
+session, another EHLO is expected, and so it too is not counted. The first
+occurrence of AUTH in a connection, or immediately following STARTTLS is not
+counted. Otherwise, all commands other than MAIL, RCPT, DATA, and QUIT are
+counted.
+
++-------------------------------------------------------------------+
+|smtp_accept_max_nonmail_hosts|Use: main|Type: host list*|Default: *|
++-------------------------------------------------------------------+
+
+You can control which hosts are subject to the smtp_accept_max_nonmail check by
+setting this option. The default value makes it apply to all hosts. By changing
+the value, you can exclude any badly-behaved hosts that you have to live with.
+
++---------------------------------------------------------------------+
+|smtp_accept_max_per_connection|Use: main|Type: integer*|Default: 1000|
++---------------------------------------------------------------------+
+
+The value of this option limits the number of MAIL commands that Exim is
+prepared to accept over a single SMTP connection, whether or not each command
+results in the transfer of a message. After the limit is reached, a 421
+response is given to subsequent MAIL commands. This limit is a safety
+precaution against a client that goes mad (incidents of this type have been
+seen). The option is expanded after the HELO or EHLO is received and may depend
+on values available at that time. An empty or zero value after expansion
+removes the limit.
+
++---------------------------------------------------------------+
+|smtp_accept_max_per_host|Use: main|Type: string*|Default: unset|
++---------------------------------------------------------------+
+
+This option restricts the number of simultaneous IP connections from a single
+host (strictly, from a single IP address) to the Exim daemon. The option is
+expanded, to enable different limits to be applied to different hosts by
+reference to $sender_host_address. Once the limit is reached, additional
+connection attempts from the same host are rejected with error code 421. This
+is entirely independent of smtp_accept_reserve. The option's default value of
+zero imposes no limit. If this option is set greater than zero, it is required
+that smtp_accept_max be non-zero.
+
+Warning: When setting this option you should not use any expansion
+constructions that take an appreciable amount of time. The expansion and test
+happen in the main daemon loop, in order to reject additional connections
+without forking additional processes (otherwise a denial-of-service attack
+could cause a vast number or processes to be created). While the daemon is
+doing this processing, it cannot accept any other incoming connections.
+
++----------------------------------------------------+
+|smtp_accept_queue|Use: main|Type: integer|Default: 0|
++----------------------------------------------------+
+
+If the number of simultaneous incoming SMTP connections being handled via the
+listening daemon exceeds this value, messages received by SMTP are just placed
+in the queue; no delivery processes are started automatically. The count is
+fixed at the start of an SMTP connection. It cannot be updated in the
+subprocess that receives messages, and so the queueing or not queueing applies
+to all messages received in the same connection.
+
+A value of zero implies no limit, and clearly any non-zero value is useful only
+if it is less than the smtp_accept_max value (unless that is zero). See also 
+queue_only, queue_only_load, queue_smtp_domains, and the various -odx command
+line options.
+
++--------------------------------------------------------------------+
+|smtp_accept_queue_per_connection|Use: main|Type: integer|Default: 10|
++--------------------------------------------------------------------+
+
+This option limits the number of delivery processes that Exim starts
+automatically when receiving messages via SMTP, whether via the daemon or by
+the use of -bs or -bS. If the value of the option is greater than zero, and the
+number of messages received in a single SMTP session exceeds this number,
+subsequent messages are placed in the queue, but no delivery processes are
+started. This helps to limit the number of Exim processes when a server
+restarts after downtime and there is a lot of mail waiting for it on other
+systems. On large systems, the default should probably be increased, and on
+dial-in client systems it should probably be set to zero (that is, disabled).
+
++------------------------------------------------------+
+|smtp_accept_reserve|Use: main|Type: integer|Default: 0|
++------------------------------------------------------+
+
+When smtp_accept_max is set greater than zero, this option specifies a number
+of SMTP connections that are reserved for connections from the hosts that are
+specified in smtp_reserve_hosts. The value set in smtp_accept_max includes this
+reserve pool. The specified hosts are not restricted to this number of
+connections; the option specifies a minimum number of connection slots for
+them, not a maximum. It is a guarantee that this group of hosts can always get
+at least smtp_accept_reserve connections. However, the limit specified by 
+smtp_accept_max_per_host is still applied to each individual host.
+
+For example, if smtp_accept_max is set to 50 and smtp_accept_reserve is set to
+5, once there are 45 active connections (from any hosts), new connections are
+accepted only from hosts listed in smtp_reserve_hosts, provided the other
+criteria for acceptance are met.
+
++-----------------------------------------------------------+
+|smtp_active_hostname|Use: main|Type: string*|Default: unset|
++-----------------------------------------------------------+
+
+This option is provided for multi-homed servers that want to masquerade as
+several different hosts. At the start of an incoming SMTP connection, its value
+is expanded and used instead of the value of $primary_hostname in SMTP
+responses. For example, it is used as domain name in the response to an
+incoming HELO or EHLO command.
+
+The active hostname is placed in the $smtp_active_hostname variable, which is
+saved with any messages that are received. It is therefore available for use in
+routers and transports when the message is later delivered.
+
+If this option is unset, or if its expansion is forced to fail, or if the
+expansion results in an empty string, the value of $primary_hostname is used.
+Other expansion failures cause a message to be written to the main and panic
+logs, and the SMTP command receives a temporary error. Typically, the value of 
+smtp_active_hostname depends on the incoming interface address. For example:
+
+smtp_active_hostname = ${if eq{$received_ip_address}{10.0.0.1}\
+  {cox.mydomain}{box.mydomain}}
+
+Although $smtp_active_hostname is primarily concerned with incoming messages,
+it is also used as the default for HELO commands in callout verification if
+there is no remote transport from which to obtain a helo_data value.
+
++-------------------------------------------------------+
+|smtp_backlog_monitor|Use: main|Type: integer|Default: 0|
++-------------------------------------------------------+
+
+If this option is set to greater than zero, and the backlog of available TCP
+connections on a socket listening for SMTP is larger than it, a line is logged
+giving the value and the socket address and port. The value is retrived jsut
+before an accept call. This facility is only available on Linux.
+
++------------------------------------------------------+
+|smtp_banner|Use: main|Type: string*|Default: see below|
++------------------------------------------------------+
+
+This string, which is expanded every time it is used, is output as the initial
+positive response to an SMTP connection. The default setting is:
+
+smtp_banner = $smtp_active_hostname ESMTP Exim \
+  $version_number $tod_full
+
+Failure to expand the string causes a panic error. If you want to create a
+multiline response to the initial SMTP connection, use "\n" in the string at
+appropriate points, but not at the end. Note that the 220 code is not included
+in this string. Exim adds it automatically (several times in the case of a
+multiline response).
+
++------------------------------------------------------------+
+|smtp_check_spool_space|Use: main|Type: boolean|Default: true|
++------------------------------------------------------------+
+
+When this option is set, if an incoming SMTP session encounters the SIZE option
+on a MAIL command, it checks that there is enough space in the spool
+directory's partition to accept a message of that size, while still leaving
+free the amount specified by check_spool_space (even if that value is zero). If
+there isn't enough space, a temporary error code is returned.
+
++--------------------------------------------------------+
+|smtp_connect_backlog|Use: main|Type: integer|Default: 20|
++--------------------------------------------------------+
+
+This option specifies a maximum number of waiting SMTP connections. Exim passes
+this value to the TCP/IP system when it sets up its listener. Once this number
+of connections are waiting for the daemon's attention, subsequent connection
+attempts are refused at the TCP/IP level. At least, that is what the manuals
+say; in some circumstances such connection attempts have been observed to time
+out instead. For large systems it is probably a good idea to increase the value
+(to 50, say). It also gives some protection against denial-of-service attacks
+by SYN flooding.
+
++-------------------------------------------------------+
+|smtp_enforce_sync|Use: main|Type: boolean|Default: true|
++-------------------------------------------------------+
+
+The SMTP protocol specification requires the client to wait for a response from
+the server at certain points in the dialogue. Without PIPELINING these
+synchronization points are after every command; with PIPELINING they are fewer,
+but they still exist.
+
+Some spamming sites send out a complete set of SMTP commands without waiting
+for any response. Exim protects against this by rejecting a message if the
+client has sent further input when it should not have. The error response "554
+SMTP synchronization error" is sent, and the connection is dropped. Testing for
+this error cannot be perfect because of transmission delays (unexpected input
+may be on its way but not yet received when Exim checks). However, it does
+detect many instances.
+
+The check can be globally disabled by setting smtp_enforce_sync false. If you
+want to disable the check selectively (for example, only for certain hosts),
+you can do so by an appropriate use of a control modifier in an ACL (see
+section 44.22). See also pipelining_advertise_hosts.
+
++--------------------------------------------------------+
+|smtp_etrn_command|Use: main|Type: string*|Default: unset|
++--------------------------------------------------------+
+
+If this option is set, the given command is run whenever an SMTP ETRN command
+is received from a host that is permitted to issue such commands (see chapter
+44). The string is split up into separate arguments which are independently
+expanded. The expansion variable $domain is set to the argument of the ETRN
+command, and no syntax checking is done on it. For example:
+
+smtp_etrn_command = /etc/etrn_command $domain \
+                    $sender_host_address
+
+If the option is not set, the argument for the ETRN command must be a #
+followed by an address string. In this case an exim -R <string> command is
+used; if the ETRN ACL has set up a named-queue then -MCG <queue> is appended.
+
+A new process is created to run the command, but Exim does not wait for it to
+complete. Consequently, its status cannot be checked. If the command cannot be
+run, a line is written to the panic log, but the ETRN caller still receives a
+250 success response. Exim is normally running under its own uid when receiving
+SMTP, so it is not possible for it to change the uid before running the
+command.
+
++---------------------------------------------------------+
+|smtp_etrn_serialize|Use: main|Type: boolean|Default: true|
++---------------------------------------------------------+
+
+When this option is set, it prevents the simultaneous execution of more than
+one identical command as a result of ETRN in an SMTP connection. See section
+49.8 for details.
+
++------------------------------------------------------------+
+|smtp_load_reserve|Use: main|Type: fixed-point|Default: unset|
++------------------------------------------------------------+
+
+If the system load average ever gets higher than this, incoming SMTP calls are
+accepted only from those hosts that match an entry in smtp_reserve_hosts. If 
+smtp_reserve_hosts is not set, no incoming SMTP calls are accepted when the
+load is over the limit. The option has no effect on ancient operating systems
+on which Exim cannot determine the load average. See also 
+deliver_queue_load_max and queue_only_load.
+
++----------------------------------------------------------+
+|smtp_max_synprot_errors|Use: main|Type: integer|Default: 3|
++----------------------------------------------------------+
+
+Exim rejects SMTP commands that contain syntax or protocol errors. In
+particular, a syntactically invalid email address, as in this command:
+
+RCPT TO:<abc xyz@a.b.c>
+
+causes immediate rejection of the command, before any other tests are done.
+(The ACL cannot be run if there is no valid address to set up for it.) An
+example of a protocol error is receiving RCPT before MAIL. If there are too
+many syntax or protocol errors in one SMTP session, the connection is dropped.
+The limit is set by this option.
+
+When the PIPELINING extension to SMTP is in use, some protocol errors are
+"expected", for instance, a RCPT command after a rejected MAIL command. Exim
+assumes that PIPELINING will be used if it advertises it (see 
+pipelining_advertise_hosts), and in this situation, "expected" errors do not
+count towards the limit.
+
++------------------------------------------------------------+
+|smtp_max_unknown_commands|Use: main|Type: integer|Default: 3|
++------------------------------------------------------------+
+
+If there are too many unrecognized commands in an incoming SMTP session, an
+Exim server drops the connection. This is a defence against some kinds of abuse
+that subvert web clients into making connections to SMTP ports; in these
+circumstances, a number of non-SMTP command lines are sent first.
+
++--------------------------------------------------------------+
+|smtp_ratelimit_hosts|Use: main|Type: host list*|Default: unset|
++--------------------------------------------------------------+
+
+Some sites find it helpful to be able to limit the rate at which certain hosts
+can send them messages, and the rate at which an individual message can specify
+recipients.
+
+Exim has two rate-limiting facilities. This section describes the older
+facility, which can limit rates within a single connection. The newer ratelimit
+ACL condition can limit rates across all connections. See section 44.39 for
+details of the newer facility.
+
+When a host matches smtp_ratelimit_hosts, the values of smtp_ratelimit_mail and
+smtp_ratelimit_rcpt are used to control the rate of acceptance of MAIL and RCPT
+commands in a single SMTP session, respectively. Each option, if set, must
+contain a set of four comma-separated values:
+
+  * A threshold, before which there is no rate limiting.
+
+  * An initial time delay. Unlike other times in Exim, numbers with decimal
+    fractional parts are allowed here.
+
+  * A factor by which to increase the delay each time.
+
+  * A maximum value for the delay. This should normally be less than 5 minutes,
+    because after that time, the client is liable to timeout the SMTP command.
+
+For example, these settings have been used successfully at the site which first
+suggested this feature, for controlling mail from their customers:
+
+smtp_ratelimit_mail = 2,0.5s,1.05,4m
+smtp_ratelimit_rcpt = 4,0.25s,1.015,4m
+
+The first setting specifies delays that are applied to MAIL commands after two
+have been received over a single connection. The initial delay is 0.5 seconds,
+increasing by a factor of 1.05 each time. The second setting applies delays to
+RCPT commands when more than four occur in a single message.
+
++---------------------------------------------------------+
+|smtp_ratelimit_mail|Use: main|Type: string|Default: unset|
++---------------------------------------------------------+
+
+See smtp_ratelimit_hosts above.
+
++---------------------------------------------------------+
+|smtp_ratelimit_rcpt|Use: main|Type: string|Default: unset|
++---------------------------------------------------------+
+
+See smtp_ratelimit_hosts above.
+
++------------------------------------------------------+
+|smtp_receive_timeout|Use: main|Type: time*|Default: 5m|
++------------------------------------------------------+
+
+This sets a timeout value for SMTP reception. It applies to all forms of SMTP
+input, including batch SMTP. If a line of input (either an SMTP command or a
+data line) is not received within this time, the SMTP connection is dropped and
+the message is abandoned. A line is written to the log containing one of the
+following messages:
+
+SMTP command timeout on connection from...
+SMTP data timeout on connection from...
+
+The former means that Exim was expecting to read an SMTP command; the latter
+means that it was in the DATA phase, reading the contents of a message.
+
+If the first character of the option is a "$" the option is expanded before use
+and may depend on $sender_host_name, $sender_host_address and $sender_host_port
+.
+
+The value set by this option can be overridden by the -os command-line option.
+A setting of zero time disables the timeout, but this should never be used for
+SMTP over TCP/IP. (It can be useful in some cases of local input using -bs or 
+-bS.) For non-SMTP input, the reception timeout is controlled by 
+receive_timeout and -or.
+
++------------------------------------------------------------+
+|smtp_reserve_hosts|Use: main|Type: host list*|Default: unset|
++------------------------------------------------------------+
+
+This option defines hosts for which SMTP connections are reserved; see 
+smtp_accept_reserve and smtp_load_reserve above.
+
++----------------------------------------------------------------+
+|smtp_return_error_details|Use: main|Type: boolean|Default: false|
++----------------------------------------------------------------+
+
+In the default state, Exim uses bland messages such as "Administrative
+prohibition" when it rejects SMTP commands for policy reasons. Many sysadmins
+like this because it gives away little information to spammers. However, some
+other sysadmins who are applying strict checking policies want to give out much
+fuller information about failures. Setting smtp_return_error_details true
+causes Exim to be more forthcoming. For example, instead of "Administrative
+prohibition", it might give:
+
+550-Rejected after DATA: '>' missing at end of address:
+550 failing address in "From" header is: <user@dom.ain
+
++--------------------------------------------------------------+
+|smtputf8_advertise_hosts|Use: main|Type: host list*|Default: *|
++--------------------------------------------------------------+
+
+When Exim is built with support for internationalised mail names, the
+availability thereof is advertised in response to EHLO only to those client
+hosts that match this option. See chapter 60 for details of Exim's support for
+internationalisation.
+
++-----------------------------------------------------------+
+|spamd_address|Use: main|Type: string|Default: 127.0.0.1 783|
++-----------------------------------------------------------+
+
+This option is available when Exim is compiled with the content-scanning
+extension. It specifies how Exim connects to SpamAssassin's spamd daemon. See
+section 45.2 for more details.
+
++--------------------------------------------------------------------+
+|spf_guess|Use: main|Type: string|Default: v=spf1 a/24 mx/24 ptr ?all|
++--------------------------------------------------------------------+
+
+This option is available when Exim is compiled with SPF support. See section
+58.4 for more details.
+
++-----------------------------------------------------------------------------+
+|spf_smtp_comment_template|Use:  | Type:   |     Default: Please%_see%_http://|
+|                         | main | string* |              www.open-spf.org/Why|
++-----------------------------------------------------------------------------+
+
+This option is available when Exim is compiled with SPF support. It allows the
+customisation of the SMTP comment that the SPF library generates. You are
+strongly encouraged to link to your own explanative site. The template must not
+contain spaces. If you need spaces in the output, use the proper placeholder.
+If libspf2 can not parse the template, it uses a built-in default broken link.
+The following placeholders (along with Exim variables (but see below)) are
+allowed in the template:
+
+  * %_: A space.
+
+  * %{L}: Envelope sender's local part.
+
+  * %{S}: Envelope sender.
+
+  * %{O}: Envelope sender's domain.
+
+  * %{D}: Current(?) domain.
+
+  * %{I}: SMTP client Ip.
+
+  * %{C}: SMTP client pretty IP.
+
+  * %{T}: Epoch time (UTC).
+
+  * %{P}: SMTP client domain name.
+
+  * %{V}: IP version.
+
+  * %{H}: EHLO/HELO domain.
+
+  * %{R}: Receiving domain.
+
+The capitalized placeholders do proper URL encoding, if you use them
+lowercased, no encoding takes place. This list was compiled from the libspf2
+sources.
+
+A note on using Exim variables: As currently the SPF library is initialized
+before the SMTP EHLO phase, the variables useful for expansion are quite
+limited.
+
++------------------------------------------------------------+
+|split_spool_directory|Use: main|Type: boolean|Default: false|
++------------------------------------------------------------+
+
+If this option is set, it causes Exim to split its input directory into 62
+subdirectories, each with a single alphanumeric character as its name. The
+sixth character of the message id is used to allocate messages to
+subdirectories; this is the least significant base-62 digit of the time of
+arrival of the message.
+
+Splitting up the spool in this way may provide better performance on systems
+where there are long mail queues, by reducing the number of files in any one
+directory. The msglog directory is also split up in a similar way to the input
+directory; however, if preserve_message_logs is set, all old msglog files are
+still placed in the single directory msglog.OLD.
+
+It is not necessary to take any special action for existing messages when
+changing split_spool_directory. Exim notices messages that are in the "wrong"
+place, and continues to process them. If the option is turned off after a
+period of being on, the subdirectories will eventually empty and be
+automatically deleted.
+
+When split_spool_directory is set, the behaviour of queue runner processes
+changes. Instead of creating a list of all messages in the queue, and then
+trying to deliver each one, in turn, it constructs a list of those in one
+sub-directory and tries to deliver them, before moving on to the next
+sub-directory. The sub-directories are processed in a random order. This
+spreads out the scanning of the input directories, and uses less memory. It is
+particularly beneficial when there are lots of messages in the queue. However,
+if queue_run_in_order is set, none of this new processing happens. The entire
+queue has to be scanned and sorted before any deliveries can start.
+
++--------------------------------------------------------------------+
+|spool_directory|Use: main|Type: string*|Default: set at compile time|
++--------------------------------------------------------------------+
+
+This defines the directory in which Exim keeps its spool, that is, the messages
+it is waiting to deliver. The default value is taken from the compile-time
+configuration setting, if there is one. If not, this option must be set. The
+string is expanded, so it can contain, for example, a reference to
+$primary_hostname.
+
+If the spool directory name is fixed on your installation, it is recommended
+that you set it at build time rather than from this option, particularly if the
+log files are being written to the spool directory (see log_file_path).
+Otherwise log files cannot be used for errors that are detected early on, such
+as failures in the configuration file.
+
+By using this option to override the compiled-in path, it is possible to run
+tests of Exim without using the standard spool.
+
++-------------------------------------------------------+
+|spool_wireformat|Use: main|Type: boolean|Default: false|
++-------------------------------------------------------+
+
+If this option is set, Exim may for some messages use an alternative format for
+data-files in the spool which matches the wire format. Doing this permits more
+efficient message reception and transmission. Currently it is only done for
+messages received using the ESMTP CHUNKING option.
+
+The following variables will not have useful values:
+
+$max_received_linelength
+$body_linecount
+$body_zerocount
+
+Users of the local_scan() API (see 46), and any external programs which are
+passed a reference to a message data file (except via the "regex", "malware" or
+"spam") ACL conditions) will need to be aware of the different formats
+potentially available.
+
+Using any of the ACL conditions noted will negate the reception benefit (as a
+Unix-mbox-format file is constructed for them). The transmission benefit is
+maintained.
+
++----------------------------------------------------+
+|sqlite_lock_timeout|Use: main|Type: time|Default: 5s|
++----------------------------------------------------+
+
+This option controls the timeout that the sqlite lookup uses when trying to
+access an SQLite database. See section 9.26 for more details.
+
++------------------------------------------------------+
+|strict_acl_vars|Use: main|Type: boolean|Default: false|
++------------------------------------------------------+
+
+This option controls what happens if a syntactically valid but undefined ACL
+variable is referenced. If it is false (the default), an empty string is
+substituted; if it is true, an error is generated. See section 44.19 for
+details of ACL variables.
+
++------------------------------------------------------------------+
+|strip_excess_angle_brackets|Use: main|Type: boolean|Default: false|
++------------------------------------------------------------------+
+
+If this option is set, redundant pairs of angle brackets round "route-addr"
+items in addresses are stripped. For example, <<xxx@a.b.c.d>> is treated as 
+<xxx@a.b.c.d>. If this is in the envelope and the message is passed on to
+another MTA, the excess angle brackets are not passed on. If this option is not
+set, multiple pairs of angle brackets cause a syntax error.
+
++---------------------------------------------------------+
+|strip_trailing_dot|Use: main|Type: boolean|Default: false|
++---------------------------------------------------------+
+
+If this option is set, a trailing dot at the end of a domain in an address is
+ignored. If this is in the envelope and the message is passed on to another
+MTA, the dot is not passed on. If this option is not set, a dot at the end of a
+domain causes a syntax error. However, addresses in header lines are checked
+only when an ACL requests header syntax checking.
+
++--------------------------------------------------------+
+|syslog_duplication|Use: main|Type: boolean|Default: true|
++--------------------------------------------------------+
+
+When Exim is logging to syslog, it writes the log lines for its three separate
+logs at different syslog priorities so that they can in principle be separated
+on the logging hosts. Some installations do not require this separation, and in
+those cases, the duplication of certain log lines is a nuisance. If 
+syslog_duplication is set false, only one copy of any particular log line is
+written to syslog. For lines that normally go to both the main log and the
+reject log, the reject log version (possibly containing message header lines)
+is written, at LOG_NOTICE priority. Lines that normally go to both the main and
+the panic log are written at the LOG_ALERT priority.
+
++-----------------------------------------------------+
+|syslog_facility|Use: main|Type: string|Default: unset|
++-----------------------------------------------------+
+
+This option sets the syslog "facility" name, used when Exim is logging to
+syslog. The value must be one of the strings "mail", "user", "news", "uucp",
+"daemon", or "localx" where x is a digit between 0 and 7. If this option is
+unset, "mail" is used. See chapter 53 for details of Exim's logging.
+
++------------------------------------------------+
+|syslog_pid|Use: main|Type: boolean|Default: true|
++------------------------------------------------+
+
+If syslog_pid is set false, the PID on Exim's log lines are omitted when these
+lines are sent to syslog. (Syslog normally prefixes the log lines with the PID
+of the logging process automatically.) You need to enable the "+pid" log
+selector item, if you want Exim to write it's PID into the logs.) See chapter
+53 for details of Exim's logging.
+
++---------------------------------------------------------+
+|syslog_processname|Use: main|Type: string|Default: "exim"|
++---------------------------------------------------------+
+
+This option sets the syslog "ident" name, used when Exim is logging to syslog.
+The value must be no longer than 32 characters. See chapter 53 for details of
+Exim's logging.
+
++------------------------------------------------------+
+|syslog_timestamp|Use: main|Type: boolean|Default: true|
++------------------------------------------------------+
+
+If syslog_timestamp is set false, the timestamps on Exim's log lines are
+omitted when these lines are sent to syslog. See chapter 53 for details of
+Exim's logging.
+
++----------------------------------------------------+
+|system_filter|Use: main|Type: string*|Default: unset|
++----------------------------------------------------+
+
+This option specifies an Exim filter file that is applied to all messages at
+the start of each delivery attempt, before any routing is done. System filters
+must be Exim filters; they cannot be Sieve filters. If the system filter
+generates any deliveries to files or pipes, or any new mail messages, the
+appropriate system_filter_..._transport option(s) must be set, to define which
+transports are to be used. Details of this facility are given in chapter 47. A
+forced expansion failure results in no filter operation.
+
++------------------------------------------------------------------------+
+|system_filter_directory_transport|Use: main|Type: string*|Default: unset|
++------------------------------------------------------------------------+
+
+This sets the name of the transport driver that is to be used when the save
+command in a system message filter specifies a path ending in "/", implying
+delivery of each message into a separate file in some directory. During the
+delivery, the variable $address_file contains the path name.
+
++-------------------------------------------------------------------+
+|system_filter_file_transport|Use: main|Type: string*|Default: unset|
++-------------------------------------------------------------------+
+
+This sets the name of the transport driver that is to be used when the save
+command in a system message filter specifies a path not ending in "/". During
+the delivery, the variable $address_file contains the path name.
+
++---------------------------------------------------------+
+|system_filter_group|Use: main|Type: string|Default: unset|
++---------------------------------------------------------+
+
+This option is used only when system_filter_user is also set. It sets the gid
+under which the system filter is run, overriding any gid that is associated
+with the user. The value may be numerical or symbolic.
+
++-------------------------------------------------------------------+
+|system_filter_pipe_transport|Use: main|Type: string*|Default: unset|
++-------------------------------------------------------------------+
+
+This specifies the transport driver that is to be used when a pipe command is
+used in a system filter. During the delivery, the variable $address_pipe
+contains the pipe command.
+
++--------------------------------------------------------------------+
+|system_filter_reply_transport|Use: main|Type: string*|Default: unset|
++--------------------------------------------------------------------+
+
+This specifies the transport driver that is to be used when a mail command is
+used in a system filter.
+
++--------------------------------------------------------+
+|system_filter_user|Use: main|Type: string|Default: unset|
++--------------------------------------------------------+
+
+If this option is set to root, the system filter is run in the main Exim
+delivery process, as root. Otherwise, the system filter runs in a separate
+process, as the given user, defaulting to the Exim run-time user. Unless the
+string consists entirely of digits, it is looked up in the password data.
+Failure to find the named user causes a configuration error. The gid is either
+taken from the password data, or specified by system_filter_group. When the uid
+is specified numerically, system_filter_group is required to be set.
+
+If the system filter generates any pipe, file, or reply deliveries, the uid
+under which the filter is run is used when transporting them, unless a
+transport option overrides.
+
++-------------------------------------------------+
+|tcp_nodelay|Use: main|Type: boolean|Default: true|
++-------------------------------------------------+
+
+If this option is set false, it stops the Exim daemon setting the TCP_NODELAY
+option on its listening sockets. Setting TCP_NODELAY turns off the "Nagle
+algorithm", which is a way of improving network performance in interactive
+(character-by-character) situations. Turning it off should improve Exim's
+performance a bit, so that is what happens by default. However, it appears that
+some broken clients cannot cope, and time out. Hence this option. It affects
+only those sockets that are set up for listening by the daemon. Sockets created
+by the smtp transport for delivering mail always set TCP_NODELAY.
+
++-----------------------------------------------------+
+|timeout_frozen_after|Use: main|Type: time|Default: 0s|
++-----------------------------------------------------+
+
+If timeout_frozen_after is set to a time greater than zero, a frozen message of
+any kind that has been in the queue for longer than the given time is
+automatically cancelled at the next queue run. If the frozen message is a
+bounce message, it is just discarded; otherwise, a bounce is sent to the
+sender, in a similar manner to cancellation by the -Mg command line option. If
+you want to timeout frozen bounce messages earlier than other kinds of frozen
+message, see ignore_bounce_errors_after.
+
+Note: the default value of zero means no timeouts; with this setting, frozen
+messages remain in the queue forever (except for any frozen bounce messages
+that are released by ignore_bounce_errors_after).
+
++----------------------------------------------+
+|timezone|Use: main|Type: string|Default: unset|
++----------------------------------------------+
+
+The value of timezone is used to set the environment variable TZ while running
+Exim (if it is different on entry). This ensures that all timestamps created by
+Exim are in the required timezone. If you want all your timestamps to be in UTC
+(aka GMT) you should set
+
+timezone = UTC
+
+The default value is taken from TIMEZONE_DEFAULT in Local/Makefile, or, if that
+is not set, from the value of the TZ environment variable when Exim is built.
+If timezone is set to the empty string, either at build or run time, any
+existing TZ variable is removed from the environment when Exim runs. This is
+appropriate behaviour for obtaining wall-clock time on some, but unfortunately
+not all, operating systems.
+
++---------------------------------------------------------+
+|tls_advertise_hosts|Use: main|Type: host list*|Default: *|
++---------------------------------------------------------+
+
+When Exim is built with support for TLS encrypted connections, the availability
+of the STARTTLS command to set up an encrypted session is advertised in
+response to EHLO only to those client hosts that match this option. See chapter
+43 for details of Exim's support for TLS. Note that the default value requires
+that a certificate be supplied using the tls_certificate option. If TLS support
+for incoming connections is not required the tls_advertise_hosts option should
+be set empty.
+
++-----------------------------------------------------------+
+|tls_alpn|Use: main|Type: string list*|Default: smtp : esmtp|
++-----------------------------------------------------------+
+
+If this option is set, the TLS library supports ALPN, and the client offers
+either more than ALPN name or a name which does not match the list, the TLS
+connection is declined.
+
++-----------------------------------------------------------+
+|tls_certificate|Use: main|Type: string list*|Default: unset|
++-----------------------------------------------------------+
+
+The value of this option is expanded, and must then be a list of absolute paths
+to files which contain the server's certificates (in PEM format). Commonly only
+one file is needed. The server's private key is also assumed to be in this file
+if tls_privatekey is unset. See chapter 43 for further details.
+
+Note: The certificates defined by this option are used only when Exim is
+receiving incoming messages as a server. If you want to supply certificates for
+use when sending messages as a client, you must set the tls_certificate option
+in the relevant smtp transport.
+
+Note: If you use filenames based on IP addresses, change the list separator in
+the usual way (6.21) to avoid confusion under IPv6.
+
+Note: Under versions of OpenSSL preceding 1.1.1, when a list of more than one
+file is used, the $tls_in_ourcert variable is unreliable. The macro
+"_TLS_BAD_MULTICERT_IN_OURCERT" will be defined for those versions.
+
+If the option contains $tls_out_sni and Exim is built against OpenSSL, then if
+the OpenSSL build supports TLS extensions and the TLS client sends the Server
+Name Indication extension, then this option and others documented in 43.12 will
+be re-expanded.
+
+If this option is unset or empty a self-signed certificate will be used. Under
+Linux this is generated at daemon startup; on other platforms it will be
+generated fresh for every connection.
+
++----------------------------------------------+
+|tls_crl|Use: main|Type: string*|Default: unset|
++----------------------------------------------+
+
+This option specifies a certificate revocation list. The expanded value must be
+the name of a file that contains CRLs in PEM format.
+
+Under OpenSSL the option can specify a directory with CRL files.
+
+Note: Under OpenSSL the option must, if given, supply a CRL for each signing
+element of the certificate chain (i.e. all but the leaf). For the file variant
+this can be multiple PEM blocks in the one file.
+
+See 43.12 for discussion of when this option might be re-expanded.
+
++-----------------------------------------------------+
+|tls_dh_max_bits|Use: main|Type: integer|Default: 2236|
++-----------------------------------------------------+
+
+The number of bits used for Diffie-Hellman key-exchange may be suggested by the
+chosen TLS library. That value might prove to be too high for interoperability.
+This option provides a maximum clamp on the value suggested, trading off
+security for interoperability.
+
+The value must be at least 1024.
+
+The value 2236 was chosen because, at time of adding the option, it was the
+hard-coded maximum value supported by the NSS cryptographic library, as used by
+Thunderbird, while GnuTLS was suggesting 2432 bits as normal.
+
+If you prefer more security and are willing to break some clients, raise this
+number.
+
+Note that the value passed to GnuTLS for *generating* a new prime may be a
+little less than this figure, because GnuTLS is inexact and may produce a
+larger prime than requested.
+
++--------------------------------------------------+
+|tls_dhparam|Use: main|Type: string*|Default: unset|
++--------------------------------------------------+
+
+The value of this option is expanded and indicates the source of DH parameters
+to be used by Exim.
+
+Note: The Exim Maintainers strongly recommend using a filename with
+site-generated local DH parameters, which has been supported across all
+versions of Exim. The other specific constants available are a fallback so that
+even when "unconfigured", Exim can offer Perfect Forward Secrecy in older
+ciphersuites in TLS.
+
+If tls_dhparam is a filename starting with a "/", then it names a file from
+which DH parameters should be loaded. If the file exists, it should hold a
+PEM-encoded PKCS#3 representation of the DH prime. If the file does not exist,
+for OpenSSL it is an error. For GnuTLS, Exim will attempt to create the file
+and fill it with a generated DH prime. For OpenSSL, if the DH bit-count from
+loading the file is greater than tls_dh_max_bits then it will be ignored, and
+treated as though the tls_dhparam were set to "none".
+
+If this option expands to the string "none", then no DH parameters will be
+loaded by Exim.
+
+If this option expands to the string "historic" and Exim is using GnuTLS, then
+Exim will attempt to load a file from inside the spool directory. If the file
+does not exist, Exim will attempt to create it. See section 43.3 for further
+details.
+
+If Exim is using OpenSSL and this option is empty or unset, then Exim will load
+a default DH prime; the default is Exim-specific but lacks verifiable
+provenance.
+
+In older versions of Exim the default was the 2048 bit prime described in
+section 2.2 of RFC 5114, "2048-bit MODP Group with 224-bit Prime Order
+Subgroup", which in IKE is assigned number 23.
+
+Otherwise, the option must expand to the name used by Exim for any of a number
+of DH primes specified in RFC 2409, RFC 3526, RFC 5114, RFC 7919, or from other
+sources. As names, Exim uses a standard specified name, else "ike" followed by
+the number used by IKE, or "default" which corresponds to
+"exim.dev.20160529.3".
+
+The available standard primes are: "ffdhe2048", "ffdhe3072", "ffdhe4096",
+"ffdhe6144", "ffdhe8192", "ike1", "ike2", "ike5", "ike14", "ike15", "ike16",
+"ike17", "ike18", "ike22", "ike23" and "ike24".
+
+The available additional primes are: "exim.dev.20160529.1",
+"exim.dev.20160529.2" and "exim.dev.20160529.3".
+
+Some of these will be too small to be accepted by clients. Some may be too
+large to be accepted by clients. The open cryptographic community has
+suspicions about the integrity of some of the later IKE values, which led into
+RFC7919 providing new fixed constants (the "ffdhe" identifiers).
+
+At this point, all of the "ike" values should be considered obsolete; they are
+still in Exim to avoid breaking unusual configurations, but are candidates for
+removal the next time we have backwards-incompatible changes.
+
+Two of them in particular ("ike1" and "ike22") are called out by RFC 8247 as
+MUST NOT use for IPSEC, and two more ("ike23" and "ike24") as SHOULD NOT.
+Because of this, Exim regards them as deprecated; if either of the first pair
+are used, warnings will be logged in the paniclog, and if any are used then
+warnings will be logged in the mainlog. All four will be removed in a future
+Exim release.
+
+The TLS protocol does not negotiate an acceptable size for this; clients tend
+to hard-drop connections if what is offered by the server is unacceptable,
+whether too large or too small, and there's no provision for the client to tell
+the server what these constraints are. Thus, as a server operator, you need to
+make an educated guess as to what is most likely to work for your userbase.
+
+Some known size constraints suggest that a bit-size in the range 2048 to 2236
+is most likely to maximise interoperability. The upper bound comes from
+applications using the Mozilla Network Security Services (NSS) library, which
+used to set its "DH_MAX_P_BITS" upper-bound to 2236. This affects many mail
+user agents (MUAs). The lower bound comes from Debian installs of Exim4 prior
+to the 4.80 release, as Debian used to patch Exim to raise the minimum
+acceptable bound from 1024 to 2048.
+
++---------------------------------------------------+
+|tls_eccurve|Use: main|Type: string*|Default: "auto"|
++---------------------------------------------------+
+
+This option selects a EC curve for use by Exim when used with OpenSSL. It has
+no effect when Exim is used with GnuTLS.
+
+After expansion it must contain a valid EC curve parameter, such as
+"prime256v1", "secp384r1", or "P-512". Consult your OpenSSL manual for valid
+selections.
+
+For OpenSSL versions before (and not including) 1.0.2, the string "auto"
+selects "prime256v1". For more recent OpenSSL versions "auto" tells the library
+to choose.
+
+If the option expands to an empty string, no EC curves will be enabled.
+
++----------------------------------------------------+
+|tls_ocsp_file|Use: main|Type: string*|Default: unset|
++----------------------------------------------------+
+
+This option must if set expand to the absolute path to a file which contains a
+current status proof for the server's certificate, as obtained from the
+Certificate Authority.
+
+Usable for GnuTLS 3.4.4 or 3.3.17 or OpenSSL 1.1.0 (or later). The macro
+"_HAVE_TLS_OCSP" will be defined for those versions.
+
+For OpenSSL 1.1.0 or later, and for GnuTLS 3.5.6 or later the expanded value of
+this option can be a list of files, to match a list given for the 
+tls_certificate option. The ordering of the two lists must match. The macro
+"_HAVE_TLS_OCSP_LIST" will be defined for those versions.
+
+The file(s) should be in DER format, except for GnuTLS 3.6.3 or later or for
+OpenSSL, when an optional filetype prefix can be used. The prefix must be one
+of "DER" or "PEM", followed by a single space. If one is used it sets the
+format for subsequent files in the list; the initial format is DER. If multiple
+proofs are wanted, for multiple chain elements (this only works under TLS1.3)
+they must be coded as a combined OCSP response.
+
+Although GnuTLS will accept PEM files with multiple separate PEM blobs (ie.
+separate OCSP responses), it sends them in the TLS Certificate record
+interleaved with the certificates of the chain; although a GnuTLS client is
+happy with that, an OpenSSL client is not.
+
++---------------------------------------------------------------+
+|tls_on_connect_ports|Use: main|Type: string list|Default: unset|
++---------------------------------------------------------------+
+
+This option specifies a list of incoming SSMTP (aka SMTPS) ports that should
+operate the SSMTP (SMTPS) protocol, where a TLS session is immediately set up
+without waiting for the client to issue a STARTTLS command. For further
+details, see section 13.4.
+
++----------------------------------------------------------+
+|tls_privatekey|Use: main|Type: string list*|Default: unset|
++----------------------------------------------------------+
+
+The value of this option is expanded, and must then be a list of absolute paths
+to files which contains the server's private keys. If this option is unset, or
+if the expansion is forced to fail, or the result is an empty string, the
+private key is assumed to be in the same file as the server's certificates. See
+chapter 43 for further details.
+
+See 43.12 for discussion of when this option might be re-expanded.
+
++---------------------------------------------------------+
+|tls_remember_esmtp|Use: main|Type: boolean|Default: false|
++---------------------------------------------------------+
+
+If this option is set true, Exim violates the RFCs by remembering that it is in
+"esmtp" state after successfully negotiating a TLS session. This provides
+support for broken clients that fail to send a new EHLO after starting a TLS
+session.
+
++----------------------------------------------------------+
+|tls_require_ciphers|Use: main|Type: string*|Default: unset|
++----------------------------------------------------------+
+
+This option controls which ciphers can be used for incoming TLS connections.
+The smtp transport has an option of the same name for controlling outgoing
+connections. This option is expanded for each connection, so can be varied for
+different clients if required. The value of this option must be a list of
+permitted cipher suites. The OpenSSL and GnuTLS libraries handle cipher control
+in somewhat different ways. If GnuTLS is being used, the client controls the
+preference order of the available ciphers. Details are given in sections 43.4
+and 43.5.
+
++--------------------------------------------------------------+
+|tls_resumption_hosts|Use: main|Type: host list*|Default: unset|
++--------------------------------------------------------------+
+
+This option controls which connections to offer the TLS resumption feature. See
+43.17 for details.
+
++--------------------------------------------------------------+
+|tls_try_verify_hosts|Use: main|Type: host list*|Default: unset|
++--------------------------------------------------------------+
+
+See tls_verify_hosts below.
+
++---------------------------------------------------------------+
+|tls_verify_certificates|Use: main|Type: string*|Default: system|
++---------------------------------------------------------------+
+
+The value of this option is expanded, and must then be either the word "system"
+or the absolute path to a file or directory containing permitted certificates
+for clients that match tls_verify_hosts or tls_try_verify_hosts.
+
+The "system" value for the option will use a system default location compiled
+into the SSL library. This is not available for GnuTLS versions preceding
+3.0.20, and will be taken as empty; an explicit location must be specified.
+
+The use of a directory for the option value is not available for GnuTLS
+versions preceding 3.3.6 and a single file must be used.
+
+With OpenSSL the certificates specified explicitly either by file or directory
+are added to those given by the system default location.
+
+These certificates should be for the certificate authorities trusted, rather
+than the public cert of individual clients. With both OpenSSL and GnuTLS, if
+the value is a file then the certificates are sent by Exim as a server to
+connecting clients, defining the list of accepted certificate authorities. Thus
+the values defined should be considered public data. To avoid this, use the
+explicit directory version. (If your peer is Exim up to 4.85, using GnuTLS, you
+may need to send the CAs (thus using the file variant). Otherwise the peer
+doesn't send its certificate.)
+
+See 43.12 for discussion of when this option might be re-expanded.
+
+A forced expansion failure or setting to an empty string is equivalent to being
+unset.
+
++----------------------------------------------------------+
+|tls_verify_hosts|Use: main|Type: host list*|Default: unset|
++----------------------------------------------------------+
+
+This option, along with tls_try_verify_hosts, controls the checking of
+certificates from clients. The expected certificates are defined by 
+tls_verify_certificates, which must be set. A configuration error occurs if
+either tls_verify_hosts or tls_try_verify_hosts is set and 
+tls_verify_certificates is not set.
+
+Any client that matches tls_verify_hosts is constrained by 
+tls_verify_certificates. When the client initiates a TLS session, it must
+present one of the listed certificates. If it does not, the connection is
+aborted. Warning: Including a host in tls_verify_hosts does not require the
+host to use TLS. It can still send SMTP commands through unencrypted
+connections. Forcing a client to use TLS has to be done separately using an ACL
+to reject inappropriate commands when the connection is not encrypted.
+
+A weaker form of checking is provided by tls_try_verify_hosts. If a client
+matches this option (but not tls_verify_hosts), Exim requests a certificate and
+checks it against tls_verify_certificates, but does not abort the connection if
+there is no certificate or if it does not match. This state can be detected in
+an ACL, which makes it possible to implement policies such as "accept for relay
+only if a verified certificate has been received, but accept for local delivery
+if encrypted, even without a verified certificate".
+
+Client hosts that match neither of these lists are not asked to present
+certificates.
+
++----------------------------------------------------------+
+|trusted_groups|Use: main|Type: string list*|Default: unset|
++----------------------------------------------------------+
+
+This option is expanded just once, at the start of Exim's processing. If this
+option is set, any process that is running in one of the listed groups, or
+which has one of them as a supplementary group, is trusted. The groups can be
+specified numerically or by name. See section 5.2 for details of what trusted
+callers are permitted to do. If neither trusted_groups nor trusted_users is
+set, only root and the Exim user are trusted.
+
++---------------------------------------------------------+
+|trusted_users|Use: main|Type: string list*|Default: unset|
++---------------------------------------------------------+
+
+This option is expanded just once, at the start of Exim's processing. If this
+option is set, any process that is running as one of the listed users is
+trusted. The users can be specified numerically or by name. See section 5.2 for
+details of what trusted callers are permitted to do. If neither trusted_groups
+nor trusted_users is set, only root and the Exim user are trusted.
+
++----------------------------------------------------+
+|unknown_login|Use: main|Type: string*|Default: unset|
++----------------------------------------------------+
+
+This is a specialized feature for use in unusual configurations. By default, if
+the uid of the caller of Exim cannot be looked up using getpwuid(), Exim gives
+up. The unknown_login option can be used to set a login name to be used in this
+circumstance. It is expanded, so values like user$caller_uid can be set. When 
+unknown_login is used, the value of unknown_username is used for the user's
+real name (gecos field), unless this has been set by the -F option.
+
++------------------------------------------------------+
+|unknown_username|Use: main|Type: string|Default: unset|
++------------------------------------------------------+
+
+See unknown_login.
+
++-----------------------------------------------------------------+
+|untrusted_set_sender|Use: main|Type: address list*|Default: unset|
++-----------------------------------------------------------------+
+
+When an untrusted user submits a message to Exim using the standard input, Exim
+normally creates an envelope sender address from the user's login and the
+default qualification domain. Data from the -f option (for setting envelope
+senders on non-SMTP messages) or the SMTP MAIL command (if -bs or -bS is used)
+is ignored.
+
+However, untrusted users are permitted to set an empty envelope sender address,
+to declare that a message should never generate any bounces. For example:
+
+exim -f '<>' user@domain.example
+
+The untrusted_set_sender option allows you to permit untrusted users to set
+other envelope sender addresses in a controlled way. When it is set, untrusted
+users are allowed to set envelope sender addresses that match any of the
+patterns in the list. Like all address lists, the string is expanded. The
+identity of the user is in $sender_ident, so you can, for example, restrict
+users to setting senders that start with their login ids followed by a hyphen
+by a setting like this:
+
+untrusted_set_sender = ^$sender_ident-
+
+If you want to allow untrusted users to set envelope sender addresses without
+restriction, you can use
+
+untrusted_set_sender = *
+
+The untrusted_set_sender option applies to all forms of local input, but only
+to the setting of the envelope sender. It does not permit untrusted users to
+use the other options which trusted user can use to override message
+parameters. Furthermore, it does not stop Exim from removing an existing 
+Sender: header in the message, or from adding a Sender: header if necessary.
+See local_sender_retain and local_from_check for ways of overriding these
+actions. The handling of the Sender: header is also described in section 48.16.
+
+The log line for a message's arrival shows the envelope sender following "<=".
+For local messages, the user's login always follows, after "U=". In -bp
+displays, and in the Exim monitor, if an untrusted user sets an envelope sender
+address, the user's login is shown in parentheses after the sender address.
+
++-----------------------------------------------------------+
+|uucp_from_pattern|Use: main|Type: string|Default: see below|
++-----------------------------------------------------------+
+
+Some applications that pass messages to an MTA via a command line interface use
+an initial line starting with "From " to pass the envelope sender. In
+particular, this is used by UUCP software. Exim recognizes such a line by means
+of a regular expression that is set in uucp_from_pattern. When the pattern
+matches, the sender address is constructed by expanding the contents of 
+uucp_from_sender, provided that the caller of Exim is a trusted user. The
+default pattern recognizes lines in the following two forms:
+
+From ph10 Fri Jan  5 12:35 GMT 1996
+From ph10 Fri, 7 Jan 97 14:00:00 GMT
+
+The pattern can be seen by running
+
+exim -bP uucp_from_pattern
+
+It checks only up to the hours and minutes, and allows for a 2-digit or 4-digit
+year in the second case. The first word after "From " is matched in the regular
+expression by a parenthesized subpattern. The default value for 
+uucp_from_sender is "$1", which therefore just uses this first word ("ph10" in
+the example above) as the message's sender. See also ignore_fromline_hosts.
+
++------------------------------------------------------+
+|uucp_from_sender|Use: main|Type: string*|Default: "$1"|
++------------------------------------------------------+
+
+See uucp_from_pattern above.
+
++--------------------------------------------------------+
+|warn_message_file|Use: main|Type: string*|Default: unset|
++--------------------------------------------------------+
+
+This option defines a template file containing paragraphs of text to be used
+for constructing the warning message which is sent by Exim when a message has
+been in the queue for a specified amount of time, as specified by delay_warning
+. Details of the file's contents are given in chapter 50. The option is
+expanded to give the file path, which must be absolute and untainted. See also 
+bounce_message_file.
+
++-----------------------------------------------------+
+|write_rejectlog|Use: main|Type: boolean|Default: true|
++-----------------------------------------------------+
+
+If this option is set false, Exim no longer writes anything to the reject log.
+See chapter 53 for details of what Exim writes to its logs.
+
+
+
+===============================================================================
+15. GENERIC OPTIONS FOR ROUTERS
+
+This chapter describes the generic options that apply to all routers. Those
+that are preconditions are marked with ** in the "use" field.
+
+For a general description of how a router operates, see sections 3.10 and 3.12.
+The latter specifies the order in which the preconditions are tested. The order
+of expansion of the options that provide data for a transport is: errors_to, 
+headers_add, headers_remove, transport.
+
+The name of a router is limited to be 64 ASCII characters long; prior to Exim
+4.95 names would be silently truncated at this length, but now it is enforced.
+
++------------------------------------------------------+
+|address_data|Use: routers|Type: string*|Default: unset|
++------------------------------------------------------+
+
+The string is expanded just before the router is run, that is, after all the
+precondition tests have succeeded. If the expansion is forced to fail, the
+router declines, the value of address_data remains unchanged, and the more
+option controls what happens next. Other expansion failures cause delivery of
+the address to be deferred.
+
+When the expansion succeeds, the value is retained with the address, and can be
+accessed using the variable $address_data in the current router, subsequent
+routers, and the eventual transport.
+
+Warning: If the current or any subsequent router is a redirect router that runs
+a user's filter file, the contents of $address_data are accessible in the
+filter. This is not normally a problem, because such data is usually either not
+confidential or it "belongs" to the current user, but if you do put
+confidential data into $address_data you need to remember this point.
+
+Even if the router declines or passes, the value of $address_data remains with
+the address, though it can be changed by another address_data setting on a
+subsequent router. If a router generates child addresses, the value of
+$address_data propagates to them. This also applies to the special kind of
+"child" that is generated by a router with the unseen option.
+
+The idea of address_data is that you can use it to look up a lot of data for
+the address once, and then pick out parts of the data later. For example, you
+could use a single LDAP lookup to return a string of the form
+
+uid=1234 gid=5678 mailbox=/mail/xyz forward=/home/xyz/.forward
+
+In the transport you could pick out the mailbox by a setting such as
+
+file = ${extract{mailbox}{$address_data}}
+
+This makes the configuration file less messy, and also reduces the number of
+lookups (though Exim does cache lookups).
+
+See also the set option below.
+
+The address_data facility is also useful as a means of passing information from
+one router to another, and from a router to a transport. In addition, if
+$address_data is set by a router when verifying a recipient address from an
+ACL, it remains available for use in the rest of the ACL statement. After
+verifying a sender, the value is transferred to $sender_address_data.
+
++-------------------------------------------------------+
+|address_test|Use: routers**|Type: boolean|Default: true|
++-------------------------------------------------------+
+
+If this option is set false, the router is skipped when routing is being tested
+by means of the -bt command line option. This can be a convenience when your
+first router sends messages to an external scanner, because it saves you having
+to set the "already scanned" indicator when testing real address routing.
+
++--------------------------------------------------------------+
+|cannot_route_message|Use: routers|Type: string*|Default: unset|
++--------------------------------------------------------------+
+
+This option specifies a text message that is used when an address cannot be
+routed because Exim has run out of routers. The default message is "Unrouteable
+address". This option is useful only on routers that have more set false, or on
+the very last router in a configuration, because the value that is used is
+taken from the last router that is considered. This includes a router that is
+skipped because its preconditions are not met, as well as a router that
+declines. For example, using the default configuration, you could put:
+
+cannot_route_message = Remote domain not found in DNS
+
+on the first router, which is a dnslookup router with more set false, and
+
+cannot_route_message = Unknown local user
+
+on the final router that checks for local users. If string expansion fails for
+this option, the default message is used. Unless the expansion failure was
+explicitly forced, a message about the failure is written to the main and panic
+logs, in addition to the normal message about the routing failure.
+
++------------------------------------------------------------+
+|caseful_local_part|Use: routers|Type: boolean|Default: false|
++------------------------------------------------------------+
+
+By default, routers handle the local parts of addresses in a case-insensitive
+manner, though the actual case is preserved for transmission with the message.
+If you want the case of letters to be significant in a router, you must set
+this option true. For individual router options that contain address or local
+part lists (for example, local_parts), case-sensitive matching can be turned on
+by "+caseful" as a list item. See section 10.21 for more details.
+
+The value of the $local_part variable is forced to lower case while a router is
+running unless caseful_local_part is set. When a router assigns an address to a
+transport, the value of $local_part when the transport runs is the same as it
+was in the router. Similarly, when a router generates child addresses by
+aliasing or forwarding, the values of $original_local_part and
+$parent_local_part are those that were used by the redirecting router.
+
+This option applies to the processing of an address by a router. When a
+recipient address is being processed in an ACL, there is a separate control
+modifier that can be used to specify case-sensitive processing within the ACL
+(see section 44.22).
+
++------------------------------------------------------------+
+|check_local_user|Use: routers**|Type: boolean|Default: false|
++------------------------------------------------------------+
+
+When this option is true, Exim checks that the local part of the recipient
+address (with affixes removed if relevant) is the name of an account on the
+local system. The check is done by calling the getpwnam() function rather than
+trying to read /etc/passwd directly. This means that other methods of holding
+password data (such as NIS) are supported. If the local part is a local user, 
+$local_part_data is set to an untainted version of the local part and $home is
+set from the password data. The latter can be tested in other preconditions
+that are evaluated after this one (the order of evaluation is given in section
+3.12). However, the value of $home can be overridden by router_home_directory.
+If the local part is not a local user, the router is skipped.
+
+If you want to check that the local part is either the name of a local user or
+matches something else, you cannot combine check_local_user with a setting of 
+local_parts, because that specifies the logical and of the two conditions.
+However, you can use a passwd lookup in a local_parts setting to achieve this.
+For example:
+
+local_parts = passwd;$local_part : lsearch;/etc/other/users
+
+Note, however, that the side effects of check_local_user (such as setting up a
+home directory) do not occur when a passwd lookup is used in a local_parts (or
+any other) precondition.
+
++-----------------------------------------------------+
+|condition|Use: routers**|Type: string*|Default: unset|
++-----------------------------------------------------+
+
+This option specifies a general precondition test that has to succeed for the
+router to be called. The condition option is the last precondition to be
+evaluated (see section 3.12). The string is expanded, and if the result is a
+forced failure, or an empty string, or one of the strings "0" or "no" or
+"false" (checked without regard to the case of the letters), the router is
+skipped, and the address is offered to the next one.
+
+If the result is any other value, the router is run (as this is the last
+precondition to be evaluated, all the other preconditions must be true).
+
+This option is unusual in that multiple condition options may be present. All 
+condition options must succeed.
+
+The condition option provides a means of applying custom conditions to the
+running of routers. Note that in the case of a simple conditional expansion,
+the default expansion values are exactly what is wanted. For example:
+
+condition = ${if >{$message_age}{600}}
+
+Because of the default behaviour of the string expansion, this is equivalent to
+
+condition = ${if >{$message_age}{600}{true}{}}
+
+A multiple condition example, which succeeds:
+
+condition = ${if >{$message_age}{600}}
+condition = ${if !eq{${lc:$local_part}}{postmaster}}
+condition = foobar
+
+If the expansion fails (other than forced failure) delivery is deferred. Some
+of the other precondition options are common special cases that could in fact
+be specified using condition.
+
+Historical note: We have condition on ACLs and on Routers. Routers are far
+older, and use one set of semantics. ACLs are newer and when they were created,
+the ACL condition process was given far stricter parse semantics. The bool{}
+expansion condition uses the same rules as ACLs. The bool_lax{} expansion
+condition uses the same rules as Routers. More pointedly, the bool_lax{} was
+written to match the existing Router rules processing behavior.
+
+This is best illustrated in an example:
+
+# If used in an ACL condition will fail with a syntax error, but
+# in a router condition any extra characters are treated as a string
+
+$ exim -be '${if eq {${lc:GOOGLE.com}} {google.com}} {yes} {no}}'
+true {yes} {no}}
+
+$ exim -be '${if eq {${lc:WHOIS.com}} {google.com}} {yes} {no}}'
+ {yes} {no}}
+
+In each example above, the if statement actually ends after "{google.com}}".
+Since no true or false braces were defined, the default if behavior is to
+return a boolean true or a null answer (which evaluates to false). The rest of
+the line is then treated as a string. So the first example resulted in the
+boolean answer "true" with the string " {yes} {no}}" appended to it. The second
+example resulted in the null output (indicating false) with the string " {yes}
+{no}}" appended to it.
+
+In fact you can put excess forward braces in too. In the router condition,
+Exim's parser only looks for "{" symbols when they mean something, like after a
+"$" or when required as part of a conditional. But otherwise "{" and "}" are
+treated as ordinary string characters.
+
+Thus, in a Router, the above expansion strings will both always evaluate true,
+as the result of expansion is a non-empty string which doesn't match an
+explicit false value. This can be tricky to debug. By contrast, in an ACL
+either of those strings will always result in an expansion error because the
+result doesn't look sufficiently boolean.
+
++-----------------------------------------------------+
+|debug_print|Use: routers|Type: string*|Default: unset|
++-----------------------------------------------------+
+
+If this option is set and debugging is enabled (see the -d command line option)
+or in address-testing mode (see the -bt command line option), the string is
+expanded and included in the debugging output. If expansion of the string
+fails, the error message is written to the debugging output, and Exim carries
+on processing. This option is provided to help with checking out the values of
+variables and so on when debugging router configurations. For example, if a 
+condition option appears not to be working, debug_print can be used to output
+the variables it references. The output happens after checks for domains, 
+local_parts, and check_local_user but before any other preconditions are
+tested. A newline is added to the text if it does not end with one. The
+variable $router_name contains the name of the router.
+
++---------------------------------------------------------+
+|disable_logging|Use: routers|Type: boolean|Default: false|
++---------------------------------------------------------+
+
+If this option is set true, nothing is logged for any routing errors or for any
+deliveries caused by this router. You should not set this option unless you
+really, really know what you are doing. See also the generic transport option
+of the same name.
+
++-----------------------------------------------------------------+
+|dnssec_request_domains|Use: routers|Type: domain list*|Default: *|
++-----------------------------------------------------------------+
+
+DNS lookups for domains matching dnssec_request_domains will be done with the
+DNSSEC request bit set. This applies to all of the SRV, MX, AAAA, A lookup
+sequence.
+
++---------------------------------------------------------------------+
+|dnssec_require_domains|Use: routers|Type: domain list*|Default: unset|
++---------------------------------------------------------------------+
+
+DNS lookups for domains matching dnssec_require_domains will be done with the
+DNSSEC request bit set. Any returns not having the Authenticated Data bit (AD
+bit) set will be ignored and logged as a host-lookup failure. This applies to
+all of the SRV, MX, AAAA, A lookup sequence.
+
++--------------------------------------------------------+
+|domains|Use: routers**|Type: domain list*|Default: unset|
++--------------------------------------------------------+
+
+If this option is set, the router is skipped unless the current domain matches
+the list. If the match is achieved by means of a file lookup, the data that the
+lookup returned for the domain is placed in $domain_data for use in string
+expansions of the driver's private options and in the transport. See section
+3.12 for a list of the order in which preconditions are evaluated.
+
++-----------------------------------------------+
+|driver|Use: routers|Type: string|Default: unset|
++-----------------------------------------------+
+
+This option must always be set. It specifies which of the available routers is
+to be used.
+
++-----------------------------------------------------+
+|dsn_lasthop|Use: routers|Type: boolean|Default: false|
++-----------------------------------------------------+
+
+If this option is set true, and extended DSN (RFC3461) processing is in effect,
+Exim will not pass on DSN requests to downstream DSN-aware hosts but will
+instead send a success DSN as if the next hop does not support DSN. Not
+effective on redirect routers.
+
++---------------------------------------------------+
+|errors_to|Use: routers|Type: string*|Default: unset|
++---------------------------------------------------+
+
+If a router successfully handles an address, it may assign the address to a
+transport for delivery or it may generate child addresses. In both cases, if
+there is a delivery problem during later processing, the resulting bounce
+message is sent to the address that results from expanding this string,
+provided that the address verifies successfully. The errors_to option is
+expanded before headers_add, headers_remove, and transport.
+
+The errors_to setting associated with an address can be overridden if it
+subsequently passes through other routers that have their own errors_to
+settings, or if the message is delivered by a transport with a return_path
+setting.
+
+If errors_to is unset, or the expansion is forced to fail, or the result of the
+expansion fails to verify, the errors address associated with the incoming
+address is used. At top level, this is the envelope sender. A non-forced
+expansion failure causes delivery to be deferred.
+
+If an address for which errors_to has been set ends up being delivered over
+SMTP, the envelope sender for that delivery is the errors_to value, so that any
+bounces that are generated by other MTAs on the delivery route are also sent
+there. You can set errors_to to the empty string by either of these settings:
+
+errors_to =
+errors_to = ""
+
+An expansion item that yields an empty string has the same effect. If you do
+this, a locally detected delivery error for addresses processed by this router
+no longer gives rise to a bounce message; the error is discarded. If the
+address is delivered to a remote host, the return path is set to "<>", unless
+overridden by the return_path option on the transport.
+
+If for some reason you want to discard local errors, but use a non-empty MAIL
+command for remote delivery, you can preserve the original return path in
+$address_data in the router, and reinstate it in the transport by setting 
+return_path.
+
+The most common use of errors_to is to direct mailing list bounces to the
+manager of the list, as described in section 51.2, or to implement VERP
+(Variable Envelope Return Paths) (see section 51.6).
+
++-----------------------------------------------+
+|expn|Use: routers**|Type: boolean|Default: true|
++-----------------------------------------------+
+
+If this option is turned off, the router is skipped when testing an address as
+a result of processing an SMTP EXPN command. You might, for example, want to
+turn it off on a router for users' .forward files, while leaving it on for the
+system alias file. See section 3.12 for a list of the order in which
+preconditions are evaluated.
+
+The use of the SMTP EXPN command is controlled by an ACL (see chapter 44). When
+Exim is running an EXPN command, it is similar to testing an address with -bt.
+Compare VRFY, whose counterpart is -bv.
+
++-----------------------------------------------------+
+|fail_verify|Use: routers|Type: boolean|Default: false|
++-----------------------------------------------------+
+
+Setting this option has the effect of setting both fail_verify_sender and 
+fail_verify_recipient to the same value.
+
++---------------------------------------------------------------+
+|fail_verify_recipient|Use: routers|Type: boolean|Default: false|
++---------------------------------------------------------------+
+
+If this option is true and an address is accepted by this router when verifying
+a recipient, verification fails.
+
++------------------------------------------------------------+
+|fail_verify_sender|Use: routers|Type: boolean|Default: false|
++------------------------------------------------------------+
+
+If this option is true and an address is accepted by this router when verifying
+a sender, verification fails.
+
++------------------------------------------------------------+
+|fallback_hosts|Use: routers|Type: string list|Default: unset|
++------------------------------------------------------------+
+
+String expansion is not applied to this option. The argument must be a
+colon-separated list of host names or IP addresses. The list separator can be
+changed (see section 6.21), and a port can be specified with each name or
+address. In fact, the format of each item is exactly the same as defined for
+the list of hosts in a manualroute router (see section 20.5).
+
+If a router queues an address for a remote transport, this host list is
+associated with the address, and used instead of the transport's fallback host
+list. If hosts_randomize is set on the transport, the order of the list is
+randomized for each use. See the fallback_hosts option of the smtp transport
+for further details.
+
++---------------------------------------------------+
+|group|Use: routers|Type: string*|Default: see below|
++---------------------------------------------------+
+
+When a router queues an address for a transport, and the transport does not
+specify a group, the group given here is used when running the delivery
+process. The group may be specified numerically or by name. If expansion fails,
+the error is logged and delivery is deferred. The default is unset, unless 
+check_local_user is set, when the default is taken from the password
+information. See also initgroups and user and the discussion in chapter 23.
+
++---------------------------------------------------+
+|headers_add|Use: routers|Type: list*|Default: unset|
++---------------------------------------------------+
+
+This option specifies a list of text headers, newline-separated (by default,
+changeable in the usual way 6.21), that is associated with any addresses that
+are accepted by the router. Each item is separately expanded, at routing time.
+However, this option has no effect when an address is just being verified. The
+way in which the text is used to add header lines at transport time is
+described in section 48.17. New header lines are not actually added until the
+message is in the process of being transported. This means that references to
+header lines in string expansions in the transport's configuration do not "see"
+the added header lines.
+
+The headers_add option is expanded after errors_to, but before headers_remove
+and transport. If an item is empty, or if an item expansion is forced to fail,
+the item has no effect. Other expansion failures are treated as configuration
+errors.
+
+Unlike most options, headers_add can be specified multiple times for a router;
+all listed headers are added.
+
+Warning 1: The headers_add option cannot be used for a redirect router that has
+the one_time option set.
+
+Warning 2: If the unseen option is set on the router, all header additions are
+deleted when the address is passed on to subsequent routers. For a redirect
+router, if a generated address is the same as the incoming address, this can
+lead to duplicate addresses with different header modifications. Exim does not
+do duplicate deliveries (except, in certain circumstances, to pipes -- see
+section 22.7), but it is undefined which of the duplicates is discarded, so
+this ambiguous situation should be avoided. The repeat_use option of the 
+redirect router may be of help.
+
++------------------------------------------------------+
+|headers_remove|Use: routers|Type: list*|Default: unset|
++------------------------------------------------------+
+
+This option specifies a list of text headers, colon-separated (by default,
+changeable in the usual way 6.21), that is associated with any addresses that
+are accepted by the router. However, the option has no effect when an address
+is just being verified. Each list item is separately expanded, at transport
+time. If an item ends in *, it will match any header with the given prefix. The
+way in which the text is used to remove header lines at transport time is
+described in section 48.17. Header lines are not actually removed until the
+message is in the process of being transported. This means that references to
+header lines in string expansions in the transport's configuration still "see"
+the original header lines.
+
+The headers_remove option is handled after errors_to and headers_add, but
+before transport. If an item expansion is forced to fail, the item has no
+effect. Other expansion failures are treated as configuration errors.
+
+Unlike most options, headers_remove can be specified multiple times for a
+router; all listed headers are removed.
+
+Warning 1: The headers_remove option cannot be used for a redirect router that
+has the one_time option set.
+
+Warning 2: If the unseen option is set on the router, all header removal
+requests are deleted when the address is passed on to subsequent routers, and
+this can lead to problems with duplicates -- see the similar warning for 
+headers_add above.
+
+Warning 3: Because of the separate expansion of the list items, items that
+contain a list separator must have it doubled. To avoid this, change the list
+separator (6.21).
+
++----------------------------------------------------------------+
+|ignore_target_hosts|Use: routers|Type: host list*|Default: unset|
++----------------------------------------------------------------+
+
+Although this option is a host list, it should normally contain IP address
+entries rather than names. If any host that is looked up by the router has an
+IP address that matches an item in this list, Exim behaves as if that IP
+address did not exist. This option allows you to cope with rogue DNS entries
+like
+
+remote.domain.example.  A  127.0.0.1
+
+by setting
+
+ignore_target_hosts = 127.0.0.1
+
+on the relevant router. If all the hosts found by a dnslookup router are
+discarded in this way, the router declines. In a conventional configuration, an
+attempt to mail to such a domain would normally provoke the "unrouteable
+domain" error, and an attempt to verify an address in the domain would fail.
+Similarly, if ignore_target_hosts is set on an ipliteral router, the router
+declines if presented with one of the listed addresses.
+
+You can use this option to disable the use of IPv4 or IPv6 for mail delivery by
+means of the first or the second of the following settings, respectively:
+
+ignore_target_hosts = 0.0.0.0/0
+ignore_target_hosts = <; 0::0/0
+
+The pattern in the first line matches all IPv4 addresses, whereas the pattern
+in the second line matches all IPv6 addresses.
+
+This option may also be useful for ignoring link-local and site-local IPv6
+addresses. Because, like all host lists, the value of ignore_target_hosts is
+expanded before use as a list, it is possible to make it dependent on the
+domain that is being routed.
+
+During its expansion, $host_address is set to the IP address that is being
+checked.
+
++----------------------------------------------------+
+|initgroups|Use: routers|Type: boolean|Default: false|
++----------------------------------------------------+
+
+If the router queues an address for a transport, and this option is true, and
+the uid supplied by the router is not overridden by the transport, the
+initgroups() function is called when running the transport to ensure that any
+additional groups associated with the uid are set up. See also group and user
+and the discussion in chapter 23.
+
++-----------------------------------------------------------------+
+|local_part_prefix|Use: routers**|Type: string list|Default: unset|
++-----------------------------------------------------------------+
+
+If this option is set, the router is skipped unless the local part starts with
+one of the given strings, or local_part_prefix_optional is true. See section
+3.12 for a list of the order in which preconditions are evaluated.
+
+The list is scanned from left to right, and the first prefix that matches is
+used. A limited form of wildcard is available; if the prefix begins with an
+asterisk, it matches the longest possible sequence of arbitrary characters at
+the start of the local part. An asterisk should therefore always be followed by
+some character that does not occur in normal local parts. Wildcarding can be
+used to set up multiple user mailboxes, as described in section 51.8.
+
+During the testing of the local_parts option, and while the router is running,
+the prefix is removed from the local part, and is available in the expansion
+variable $local_part_prefix. When a message is being delivered, if the router
+accepts the address, this remains true during subsequent delivery by a
+transport. In particular, the local part that is transmitted in the RCPT
+command for LMTP, SMTP, and BSMTP deliveries has the prefix removed by default.
+This behaviour can be overridden by setting rcpt_include_affixes true on the
+relevant transport.
+
+If wildcarding (above) was used then the part of the prefix matching the
+wildcard is available in $local_part_prefix_v.
+
+When an address is being verified, local_part_prefix affects only the behaviour
+of the router. If the callout feature of verification is in use, this means
+that the full address, including the prefix, will be used during the callout.
+
+The prefix facility is commonly used to handle local parts of the form 
+owner-something. Another common use is to support local parts of the form 
+real-username to bypass a user's .forward file - helpful when trying to tell a
+user their forwarding is broken - by placing a router like this one immediately
+before the router that handles .forward files:
+
+real_localuser:
+  driver = accept
+  local_part_prefix = real-
+  check_local_user
+  transport = local_delivery
+
+For security, it would probably be a good idea to restrict the use of this
+router to locally-generated messages, using a condition such as this:
+
+  condition = ${if match {$sender_host_address}\
+                         {\N^(|127\.0\.0\.1)$\N}}
+
+If both local_part_prefix and local_part_suffix are set for a router, both
+conditions must be met if not optional. Care must be taken if wildcards are
+used in both a prefix and a suffix on the same router. Different separator
+characters must be used to avoid ambiguity.
+
++--------------------------------------------------------------------+
+|local_part_prefix_optional|Use: routers|Type: boolean|Default: false|
++--------------------------------------------------------------------+
+
+See local_part_prefix above.
+
++-----------------------------------------------------------------+
+|local_part_suffix|Use: routers**|Type: string list|Default: unset|
++-----------------------------------------------------------------+
+
+This option operates in the same way as local_part_prefix, except that the
+local part must end (rather than start) with the given string, the 
+local_part_suffix_optional option determines whether the suffix is mandatory,
+and the wildcard * character, if present, must be the last character of the
+suffix. This option facility is commonly used to handle local parts of the form
+something-request and multiple user mailboxes of the form username-foo.
+
++--------------------------------------------------------------------+
+|local_part_suffix_optional|Use: routers|Type: boolean|Default: false|
++--------------------------------------------------------------------+
+
+See local_part_suffix above.
+
++----------------------------------------------------------------+
+|local_parts|Use: routers**|Type: local part list*|Default: unset|
++----------------------------------------------------------------+
+
+The router is run only if the local part of the address matches the list. See
+section 3.12 for a list of the order in which preconditions are evaluated, and
+section 10.22 for a discussion of local part lists. Because the string is
+expanded, it is possible to make it depend on the domain, for example:
+
+local_parts = dbm;/usr/local/specials/$domain_data
+
+If the match is achieved by a lookup, the data that the lookup returned for the
+local part is placed in the variable $local_part_data for use in expansions of
+the router's private options or in the transport. You might use this option,
+for example, if you have a large number of local virtual domains, and you want
+to send all postmaster mail to the same place without having to set up an alias
+in each virtual domain:
+
+postmaster:
+  driver = redirect
+  local_parts = postmaster
+  data = postmaster@real.domain.example
+
++----------------------------------------------------------+
+|log_as_local|Use: routers|Type: boolean|Default: see below|
++----------------------------------------------------------+
+
+Exim has two logging styles for delivery, the idea being to make local
+deliveries stand out more visibly from remote ones. In the "local" style, the
+recipient address is given just as the local part, without a domain. The use of
+this style is controlled by this option. It defaults to true for the accept
+router, and false for all the others. This option applies only when a router
+assigns an address to a transport. It has no effect on routers that redirect
+addresses.
+
++----------------------------------------------+
+|more|Use: routers|Type: boolean*|Default: true|
++----------------------------------------------+
+
+The result of string expansion for this option must be a valid boolean value,
+that is, one of the strings "yes", "no", "true", or "false". Any other result
+causes an error, and delivery is deferred. If the expansion is forced to fail,
+the default value for the option (true) is used. Other failures cause delivery
+to be deferred.
+
+If this option is set false, and the router declines to handle the address, no
+further routers are tried, routing fails, and the address is bounced. However,
+if the router explicitly passes an address to the following router by means of
+the setting
+
+self = pass
+
+or otherwise, the setting of more is ignored. Also, the setting of more does
+not affect the behaviour if one of the precondition tests fails. In that case,
+the address is always passed to the next router.
+
+Note that address_data is not considered to be a precondition. If its expansion
+is forced to fail, the router declines, and the value of more controls what
+happens next.
+
++---------------------------------------------------------+
+|pass_on_timeout|Use: routers|Type: boolean|Default: false|
++---------------------------------------------------------+
+
+If a router times out during a host lookup, it normally causes deferral of the
+address. If pass_on_timeout is set, the address is passed on to the next
+router, overriding no_more. This may be helpful for systems that are
+intermittently connected to the Internet, or those that want to pass to a smart
+host any messages that cannot immediately be delivered.
+
+There are occasional other temporary errors that can occur while doing DNS
+lookups. They are treated in the same way as a timeout, and this option applies
+to all of them.
+
++----------------------------------------------------+
+|pass_router|Use: routers|Type: string|Default: unset|
++----------------------------------------------------+
+
+Routers that recognize the generic self option (dnslookup, ipliteral, and 
+manualroute) are able to return "pass", forcing routing to continue, and
+overriding a false setting of more. When one of these routers returns "pass",
+the address is normally handed on to the next router in sequence. This can be
+changed by setting pass_router to the name of another router. However (unlike 
+redirect_router) the named router must be below the current router, to avoid
+loops. Note that this option applies only to the special case of "pass". It
+does not apply when a router returns "decline" because it cannot handle an
+address.
+
++--------------------------------------------------------+
+|redirect_router|Use: routers|Type: string|Default: unset|
++--------------------------------------------------------+
+
+Sometimes an administrator knows that it is pointless to reprocess addresses
+generated from alias or forward files with the same router again. For example,
+if an alias file translates real names into login ids there is no point
+searching the alias file a second time, especially if it is a large file.
+
+The redirect_router option can be set to the name of any router instance. It
+causes the routing of any generated addresses to start at the named router
+instead of at the first router. This option has no effect if the router in
+which it is set does not generate new addresses.
+
++--------------------------------------------------------------+
+|require_files|Use: routers**|Type: string list*|Default: unset|
++--------------------------------------------------------------+
+
+This option provides a general mechanism for predicating the running of a
+router on the existence or non-existence of certain files or directories.
+Before running a router, as one of its precondition tests, Exim works its way
+through the require_files list, expanding each item separately.
+
+Because the list is split before expansion, any colons in expansion items must
+be doubled, or the facility for using a different list separator must be used (
+6.21). If any expansion is forced to fail, the item is ignored. Other expansion
+failures cause routing of the address to be deferred.
+
+If any expanded string is empty, it is ignored. Otherwise, except as described
+below, each string must be a fully qualified file path, optionally preceded by
+"!". The paths are passed to the stat() function to test for the existence of
+the files or directories. The router is skipped if any paths not preceded by "!
+" do not exist, or if any paths preceded by "!" do exist.
+
+If stat() cannot determine whether a file exists or not, delivery of the
+message is deferred. This can happen when NFS-mounted filesystems are
+unavailable.
+
+This option is checked after the domains, local_parts, and senders options, so
+you cannot use it to check for the existence of a file in which to look up a
+domain, local part, or sender. (See section 3.12 for a full list of the order
+in which preconditions are evaluated.) However, as these options are all
+expanded, you can use the exists expansion condition to make such tests. The 
+require_files option is intended for checking files that the router may be
+going to use internally, or which are needed by a transport (e.g., .procmailrc
+).
+
+During delivery, the stat() function is run as root, but there is a facility
+for some checking of the accessibility of a file by another user. This is not a
+proper permissions check, but just a "rough" check that operates as follows:
+
+If an item in a require_files list does not contain any forward slash
+characters, it is taken to be the user (and optional group, separated by a
+comma) to be checked for subsequent files in the list. If no group is specified
+but the user is specified symbolically, the gid associated with the uid is
+used. For example:
+
+require_files = mail:/some/file
+require_files = $local_part_data:$home/.procmailrc
+
+If a user or group name in a require_files list does not exist, the 
+require_files condition fails.
+
+Exim performs the check by scanning along the components of the file path, and
+checking the access for the given uid and gid. It checks for "x" access on
+directories, and "r" access on the final file. Note that this means that file
+access control lists, if the operating system has them, are ignored.
+
+Warning 1: When the router is being run to verify addresses for an incoming
+SMTP message, Exim is not running as root, but under its own uid. This may
+affect the result of a require_files check. In particular, stat() may yield the
+error EACCES ("Permission denied"). This means that the Exim user is not
+permitted to read one of the directories on the file's path.
+
+Warning 2: Even when Exim is running as root while delivering a message, stat()
+can yield EACCES for a file in an NFS directory that is mounted without root
+access. In this case, if a check for access by a particular user is requested,
+Exim creates a subprocess that runs as that user, and tries the check again in
+that process.
+
+The default action for handling an unresolved EACCES is to consider it to be
+caused by a configuration error, and routing is deferred because the existence
+or non-existence of the file cannot be determined. However, in some
+circumstances it may be desirable to treat this condition as if the file did
+not exist. If the filename (or the exclamation mark that precedes the filename
+for non-existence) is preceded by a plus sign, the EACCES error is treated as
+if the file did not exist. For example:
+
+require_files = +/some/file
+
+If the router is not an essential part of verification (for example, it handles
+users' .forward files), another solution is to set the verify option false so
+that the router is skipped when verifying.
+
++------------------------------------------------------------------+
+|retry_use_local_part|Use: routers|Type: boolean|Default: see below|
++------------------------------------------------------------------+
+
+When a delivery suffers a temporary routing failure, a retry record is created
+in Exim's hints database. For addresses whose routing depends only on the
+domain, the key for the retry record should not involve the local part, but for
+other addresses, both the domain and the local part should be included.
+Usually, remote routing is of the former kind, and local routing is of the
+latter kind.
+
+This option controls whether the local part is used to form the key for retry
+hints for addresses that suffer temporary errors while being handled by this
+router. The default value is true for any router that has any of 
+check_local_user, local_parts, condition, local_part_prefix, local_part_suffix,
+senders or require_files set, and false otherwise. Note that this option does
+not apply to hints keys for transport delays; they are controlled by a generic
+transport option of the same name.
+
+Failing to set this option when it is needed (because a remote router handles
+only some of the local-parts for a domain) can result in incorrect error
+messages being generated.
+
+The setting of retry_use_local_part applies only to the router on which it
+appears. If the router generates child addresses, they are routed
+independently; this setting does not become attached to them.
+
++---------------------------------------------------------------+
+|router_home_directory|Use: routers|Type: string*|Default: unset|
++---------------------------------------------------------------+
+
+This option sets a home directory for use while the router is running. (Compare
+transport_home_directory, which sets a home directory for later transporting.)
+In particular, if used on a redirect router, this option sets a value for $home
+while a filter is running. The value is expanded; forced expansion failure
+causes the option to be ignored - other failures cause the router to defer.
+
+Expansion of router_home_directory happens immediately after the 
+check_local_user test (if configured), before any further expansions take
+place. (See section 3.12 for a list of the order in which preconditions are
+evaluated.) While the router is running, router_home_directory overrides the
+value of $home that came from check_local_user.
+
+When a router accepts an address and assigns it to a local transport (including
+the cases when a redirect router generates a pipe, file, or autoreply
+delivery), the home directory setting for the transport is taken from the first
+of these values that is set:
+
+  * The home_directory option on the transport;
+
+  * The transport_home_directory option on the router;
+
+  * The password data if check_local_user is set on the router;
+
+  * The router_home_directory option on the router.
+
+In other words, router_home_directory overrides the password data for the
+router, but not for the transport.
+
++----------------------------------------------+
+|self|Use: routers|Type: string|Default: freeze|
++----------------------------------------------+
+
+This option applies to those routers that use a recipient address to find a
+list of remote hosts. Currently, these are the dnslookup, ipliteral, and 
+manualroute routers. Certain configurations of the queryprogram router can also
+specify a list of remote hosts. Usually such routers are configured to send the
+message to a remote host via an smtp transport. The self option specifies what
+happens when the first host on the list turns out to be the local host. The way
+in which Exim checks for the local host is described in section 13.8.
+
+Normally this situation indicates either an error in Exim's configuration (for
+example, the router should be configured not to process this domain), or an
+error in the DNS (for example, the MX should not point to this host). For this
+reason, the default action is to log the incident, defer the address, and
+freeze the message. The following alternatives are provided for use in special
+cases:
+
+defer
+
+    Delivery of the message is tried again later, but the message is not
+    frozen.
+
+reroute: <domain>
+
+    The domain is changed to the given domain, and the address is passed back
+    to be reprocessed by the routers. No rewriting of headers takes place. This
+    behaviour is essentially a redirection.
+
+reroute: rewrite: <domain>
+
+    The domain is changed to the given domain, and the address is passed back
+    to be reprocessed by the routers. Any headers that contain the original
+    domain are rewritten.
+
+pass
+
+    The router passes the address to the next router, or to the router named in
+    the pass_router option if it is set. This overrides no_more. During
+    subsequent routing and delivery, the variable $self_hostname contains the
+    name of the local host that the router encountered. This can be used to
+    distinguish between different cases for hosts with multiple names. The
+    combination
+
+    self = pass
+    no_more
+
+    ensures that only those addresses that routed to the local host are passed
+    on. Without no_more, addresses that were declined for other reasons would
+    also be passed to the next router.
+
+fail
+
+    Delivery fails and an error report is generated.
+
+send
+
+    The anomaly is ignored and the address is queued for the transport. This
+    setting should be used with extreme caution. For an smtp transport, it
+    makes sense only in cases where the program that is listening on the SMTP
+    port is not this version of Exim. That is, it must be some other MTA, or
+    Exim with a different configuration file that handles the domain in another
+    way.
+
++---------------------------------------------------------+
+|senders|Use: routers**|Type: address list*|Default: unset|
++---------------------------------------------------------+
+
+If this option is set, the router is skipped unless the message's sender
+address matches something on the list. See section 3.12 for a list of the order
+in which preconditions are evaluated.
+
+There are issues concerning verification when the running of routers is
+dependent on the sender. When Exim is verifying the address in an errors_to
+setting, it sets the sender to the null string. When using the -bt option to
+check a configuration file, it is necessary also to use the -f option to set an
+appropriate sender. For incoming mail, the sender is unset when verifying the
+sender, but is available when verifying any recipients. If the SMTP VRFY
+command is enabled, it must be used after MAIL if the sender address matters.
+
++-------------------------------------------------+
+|set|Use: routers|Type: string list|Default: unset|
++-------------------------------------------------+
+
+This option may be used multiple times on a router; because of this the list
+aspect is mostly irrelevant. The list separator is a semicolon but can be
+changed in the usual way.
+
+Each list-element given must be of the form "name = value" and the names used
+must start with the string "r_". Values containing a list-separator should have
+them doubled. When a router runs, the strings are evaluated in order, to create
+variables which are added to the set associated with the address. This is done
+immediately after all the preconditions, before the evaluation of the 
+address_data option. The variable is set with the expansion of the value. The
+variables can be used by the router options (not including any preconditions)
+and by the transport. Later definitions of a given named variable will override
+former ones. Variable use is via the usual $r_... syntax.
+
+This is similar to the address_data option, except that many independent
+variables can be used, with choice of naming.
+
++--------------------------------------------------------------+
+|translate_ip_address|Use: routers|Type: string*|Default: unset|
++--------------------------------------------------------------+
+
+There exist some rare networking situations (for example, packet radio) where
+it is helpful to be able to translate IP addresses generated by normal routing
+mechanisms into other IP addresses, thus performing a kind of manual IP
+routing. This should be done only if the normal IP routing of the TCP/IP stack
+is inadequate or broken. Because this is an extremely uncommon requirement, the
+code to support this option is not included in the Exim binary unless
+SUPPORT_TRANSLATE_IP_ADDRESS=yes is set in Local/Makefile.
+
+The translate_ip_address string is expanded for every IP address generated by
+the router, with the generated address set in $host_address. If the expansion
+is forced to fail, no action is taken. For any other expansion error, delivery
+of the message is deferred. If the result of the expansion is an IP address,
+that replaces the original address; otherwise the result is assumed to be a
+host name - this is looked up using gethostbyname() (or getipnodebyname() when
+available) to produce one or more replacement IP addresses. For example, to
+subvert all IP addresses in some specific networks, this could be added to a
+router:
+
+translate_ip_address = \
+  ${lookup{${mask:$host_address/26}}lsearch{/some/file}\
+    {$value}fail}}
+
+The file would contain lines like
+
+10.2.3.128/26    some.host
+10.8.4.34/26     10.44.8.15
+
+You should not make use of this facility unless you really understand what you
+are doing.
+
++---------------------------------------------------+
+|transport|Use: routers|Type: string*|Default: unset|
++---------------------------------------------------+
+
+This option specifies the transport to be used when a router accepts an address
+and sets it up for delivery. A transport is never needed if a router is used
+only for verification. The value of the option is expanded at routing time,
+after the expansion of errors_to, headers_add, and headers_remove, and result
+must be the name of one of the configured transports. If it is not, delivery is
+deferred.
+
+The transport option is not used by the redirect router, but it does have some
+private options that set up transports for pipe and file deliveries (see
+chapter 22).
+
++---------------------------------------------------------------------+
+|transport_current_directory|Use: routers|Type: string*|Default: unset|
++---------------------------------------------------------------------+
+
+This option associates a current directory with any address that is routed to a
+local transport. This can happen either because a transport is explicitly
+configured for the router, or because it generates a delivery to a file or a
+pipe. During the delivery process (that is, at transport time), this option
+string is expanded and is set as the current directory, unless overridden by a
+setting on the transport. If the expansion fails for any reason, including
+forced failure, an error is logged, and delivery is deferred. See chapter 23
+for details of the local delivery environment.
+
++----------------------------------------------------------------------+
+|transport_home_directory|Use: routers|Type: string*|Default: see below|
++----------------------------------------------------------------------+
+
+This option associates a home directory with any address that is routed to a
+local transport. This can happen either because a transport is explicitly
+configured for the router, or because it generates a delivery to a file or a
+pipe. During the delivery process (that is, at transport time), the option
+string is expanded and is set as the home directory, unless overridden by a
+setting of home_directory on the transport. If the expansion fails for any
+reason, including forced failure, an error is logged, and delivery is deferred.
+
+If the transport does not specify a home directory, and 
+transport_home_directory is not set for the router, the home directory for the
+transport is taken from the password data if check_local_user is set for the
+router. Otherwise it is taken from router_home_directory if that option is set;
+if not, no home directory is set for the transport.
+
+See chapter 23 for further details of the local delivery environment.
+
++-------------------------------------------------+
+|unseen|Use: routers|Type: boolean*|Default: false|
++-------------------------------------------------+
+
+The result of string expansion for this option must be a valid boolean value,
+that is, one of the strings "yes", "no", "true", or "false". Any other result
+causes an error, and delivery is deferred. If the expansion is forced to fail,
+the default value for the option (false) is used. Other failures cause delivery
+to be deferred.
+
+When this option is set true, routing does not cease if the router accepts the
+address. Instead, a copy of the incoming address is passed to the next router,
+overriding a false setting of more. There is little point in setting more false
+if unseen is always true, but it may be useful in cases when the value of 
+unseen contains expansion items (and therefore, presumably, is sometimes true
+and sometimes false).
+
+Setting the unseen option has a similar effect to the unseen command qualifier
+in filter files. It can be used to cause copies of messages to be delivered to
+some other destination, while also carrying out a normal delivery. In effect,
+the current address is made into a "parent" that has two children - one that is
+delivered as specified by this router, and a clone that goes on to be routed
+further. For this reason, unseen may not be combined with the one_time option
+in a redirect router.
+
+Warning: Header lines added to the address (or specified for removal) by this
+router or by previous routers affect the "unseen" copy of the message only. The
+clone that continues to be processed by further routers starts with no added
+headers and none specified for removal. For a redirect router, if a generated
+address is the same as the incoming address, this can lead to duplicate
+addresses with different header modifications. Exim does not do duplicate
+deliveries (except, in certain circumstances, to pipes -- see section 22.7),
+but it is undefined which of the duplicates is discarded, so this ambiguous
+situation should be avoided. The repeat_use option of the redirect router may
+be of help.
+
+Unlike the handling of header modifications, any data that was set by the 
+address_data option in the current or previous routers is passed on to
+subsequent routers.
+
++--------------------------------------------------+
+|user|Use: routers|Type: string*|Default: see below|
++--------------------------------------------------+
+
+When a router queues an address for a transport, and the transport does not
+specify a user, the user given here is used when running the delivery process.
+The user may be specified numerically or by name. If expansion fails, the error
+is logged and delivery is deferred. This user is also used by the redirect
+router when running a filter file. The default is unset, except when 
+check_local_user is set. In this case, the default is taken from the password
+information. If the user is specified as a name, and group is not set, the
+group associated with the user is used. See also initgroups and group and the
+discussion in chapter 23.
+
++-------------------------------------------------+
+|verify|Use: routers**|Type: boolean|Default: true|
++-------------------------------------------------+
+
+Setting this option has the effect of setting verify_sender and 
+verify_recipient to the same value.
+
++-------------------------------------------------------+
+|verify_only|Use: routers**|Type: boolean|Default: false|
++-------------------------------------------------------+
+
+If this option is set, the router is used only when verifying an address,
+delivering in cutthrough mode or testing with the -bv option, not when actually
+doing a delivery, testing with the -bt option, or running the SMTP EXPN
+command. It can be further restricted to verifying only senders or recipients
+by means of verify_sender and verify_recipient.
+
+Warning: When the router is being run to verify addresses for an incoming SMTP
+message, Exim is not running as root, but under its own uid. If the router
+accesses any files, you need to make sure that they are accessible to the Exim
+user or group.
+
++-----------------------------------------------------------+
+|verify_recipient|Use: routers**|Type: boolean|Default: true|
++-----------------------------------------------------------+
+
+If this option is false, the router is skipped when verifying recipient
+addresses, delivering in cutthrough mode or testing recipient verification
+using -bv. See section 3.12 for a list of the order in which preconditions are
+evaluated. See also the $verify_mode variable.
+
++--------------------------------------------------------+
+|verify_sender|Use: routers**|Type: boolean|Default: true|
++--------------------------------------------------------+
+
+If this option is false, the router is skipped when verifying sender addresses
+or testing sender verification using -bvs. See section 3.12 for a list of the
+order in which preconditions are evaluated. See also the $verify_mode variable.
+
+
+
+===============================================================================
+16. THE ACCEPT ROUTER
+
+The accept router has no private options of its own. Unless it is being used
+purely for verification (see verify_only) a transport is required to be defined
+by the generic transport option. If the preconditions that are specified by
+generic options are met, the router accepts the address and queues it for the
+given transport. The most common use of this router is for setting up
+deliveries to local mailboxes. For example:
+
+localusers:
+  driver = accept
+  domains = mydomain.example
+  check_local_user
+  transport = local_delivery
+
+The domains condition in this example checks the domain of the address, and 
+check_local_user checks that the local part is the login of a local user. When
+both preconditions are met, the accept router runs, and queues the address for
+the local_delivery transport.
+
+
+
+===============================================================================
+17. THE DNSLOOKUP ROUTER
+
+The dnslookup router looks up the hosts that handle mail for the recipient's
+domain in the DNS. A transport must always be set for this router, unless 
+verify_only is set.
+
+If SRV support is configured (see check_srv below), Exim first searches for SRV
+records. If none are found, or if SRV support is not configured, MX records are
+looked up. If no MX records exist, address records are sought. However, 
+mx_domains can be set to disable the direct use of address records.
+
+MX records of equal priority are sorted by Exim into a random order. Exim then
+looks for address records for the host names obtained from MX or SRV records.
+When a host has more than one IP address, they are sorted into a random order,
+except that IPv6 addresses are sorted before IPv4 addresses. If all the IP
+addresses found are discarded by a setting of the ignore_target_hosts generic
+option, the router declines.
+
+Unless they have the highest priority (lowest MX value), MX records that point
+to the local host, or to any host name that matches hosts_treat_as_local, are
+discarded, together with any other MX records of equal or lower priority.
+
+If the host pointed to by the highest priority MX record, or looked up as an
+address record, is the local host, or matches hosts_treat_as_local, what
+happens is controlled by the generic self option.
+
+
+17.1 Problems with DNS lookups
+------------------------------
+
+There have been problems with DNS servers when SRV records are looked up. Some
+misbehaving servers return a DNS error or timeout when a non-existent SRV
+record is sought. Similar problems have in the past been reported for MX
+records. The global dns_again_means_nonexist option can help with this problem,
+but it is heavy-handed because it is a global option.
+
+For this reason, there are two options, srv_fail_domains and mx_fail_domains,
+that control what happens when a DNS lookup in a dnslookup router results in a
+DNS failure or a "try again" response. If an attempt to look up an SRV or MX
+record causes one of these results, and the domain matches the relevant list,
+Exim behaves as if the DNS had responded "no such record". In the case of an
+SRV lookup, this means that the router proceeds to look for MX records; in the
+case of an MX lookup, it proceeds to look for A or AAAA records, unless the
+domain matches mx_domains, in which case routing fails.
+
+
+17.2 Declining addresses by dnslookup
+-------------------------------------
+
+There are a few cases where a dnslookup router will decline to accept an
+address; if such a router is expected to handle "all remaining non-local
+domains", then it is important to set no_more.
+
+The router will defer rather than decline if the domain is found in the 
+fail_defer_domains router option.
+
+Reasons for a dnslookup router to decline currently include:
+
+  * The domain does not exist in DNS
+
+  * The domain exists but the MX record's host part is just "."; this is a
+    common convention (borrowed from SRV) used to indicate that there is no
+    such service for this domain and to not fall back to trying A/AAAA records.
+
+  * Ditto, but for SRV records, when check_srv is set on this router.
+
+  * MX record points to a non-existent host.
+
+  * MX record points to an IP address and the main section option 
+    allow_mx_to_ip is not set.
+
+  * MX records exist and point to valid hosts, but all hosts resolve only to
+    addresses blocked by the ignore_target_hosts generic option on this router.
+
+  * The domain is not syntactically valid (see also allow_utf8_domains and 
+    dns_check_names_pattern for handling one variant of this)
+
+  * check_secondary_mx is set on this router but the local host can not be
+    found in the MX records (see below)
+
+
+17.3 Private options for dnslookup
+----------------------------------
+
+The private options for the dnslookup router are as follows:
+
++--------------------------------------------------------------+
+|check_secondary_mx|Use: dnslookup|Type: boolean|Default: false|
++--------------------------------------------------------------+
+
+If this option is set, the router declines unless the local host is found in
+(and removed from) the list of hosts obtained by MX lookup. This can be used to
+process domains for which the local host is a secondary mail exchanger
+differently to other domains. The way in which Exim decides whether a host is
+the local host is described in section 13.8.
+
++-----------------------------------------------------+
+|check_srv|Use: dnslookup|Type: string*|Default: unset|
++-----------------------------------------------------+
+
+The dnslookup router supports the use of SRV records (see RFC 2782) in addition
+to MX and address records. The support is disabled by default. To enable SRV
+support, set the check_srv option to the name of the service required. For
+example,
+
+check_srv = smtp
+
+looks for SRV records that refer to the normal smtp service. The option is
+expanded, so the service name can vary from message to message or address to
+address. This might be helpful if SRV records are being used for a submission
+service. If the expansion is forced to fail, the check_srv option is ignored,
+and the router proceeds to look for MX records in the normal way.
+
+When the expansion succeeds, the router searches first for SRV records for the
+given service (it assumes TCP protocol). A single SRV record with a host name
+that consists of just a single dot indicates "no such service for this domain";
+if this is encountered, the router declines. If other kinds of SRV record are
+found, they are used to construct a host list for delivery according to the
+rules of RFC 2782. MX records are not sought in this case.
+
+When no SRV records are found, MX records (and address records) are sought in
+the traditional way. In other words, SRV records take precedence over MX
+records, just as MX records take precedence over address records. Note that
+this behaviour is not sanctioned by RFC 2782, though a previous draft RFC
+defined it. It is apparently believed that MX records are sufficient for email
+and that SRV records should not be used for this purpose. However, SRV records
+have an additional "weight" feature which some people might find useful when
+trying to split an SMTP load between hosts of different power.
+
+See section 17.1 above for a discussion of Exim's behaviour when there is a DNS
+lookup error.
+
++-------------------------------------------------------------------+
+|fail_defer_domains|Use: dnslookup|Type: domain list*|Default: unset|
++-------------------------------------------------------------------+
+
+DNS lookups for domains matching fail_defer_domains which find no matching
+record will cause the router to defer rather than the default behaviour of
+decline. This maybe be useful for queueing messages for a newly created domain
+while the DNS configuration is not ready. However, it will result in any
+message with mistyped domains also being queued.
+
++-------------------------------------------+
+|ipv4_only|Use: string*|Type: unset|Default:|
++-------------------------------------------+
+
+The string is expanded, and if the result is anything but a forced failure, or
+an empty string, or one of the strings ?0? or ?no? or ?false? (checked without
+regard to the case of the letters), only A records are used.
+
++---------------------------------------------+
+|ipv4_prefer|Use: string*|Type: unset|Default:|
++---------------------------------------------+
+
+The string is expanded, and if the result is anything but a forced failure, or
+an empty string, or one of the strings ?0? or ?no? or ?false? (checked without
+regard to the case of the letters), A records are sorted before AAAA records
+(inverting the default).
+
++-----------------------------------------------------------+
+|mx_domains|Use: dnslookup|Type: domain list*|Default: unset|
++-----------------------------------------------------------+
+
+A domain that matches mx_domains is required to have either an MX or an SRV
+record in order to be recognized. (The name of this option could be improved.)
+For example, if all the mail hosts in fict.example are known to have MX
+records, except for those in discworld.fict.example, you could use this
+setting:
+
+mx_domains = ! *.discworld.fict.example : *.fict.example
+
+This specifies that messages addressed to a domain that matches the list but
+has no MX record should be bounced immediately instead of being routed using
+the address record.
+
++----------------------------------------------------------------+
+|mx_fail_domains|Use: dnslookup|Type: domain list*|Default: unset|
++----------------------------------------------------------------+
+
+If the DNS lookup for MX records for one of the domains in this list causes a
+DNS lookup error, Exim behaves as if no MX records were found. See section 17.1
+for more discussion.
+
++---------------------------------------------------------+
+|qualify_single|Use: dnslookup|Type: boolean|Default: true|
++---------------------------------------------------------+
+
+When this option is true, the resolver option RES_DEFNAMES is set for DNS
+lookups. Typically, but not standardly, this causes the resolver to qualify
+single-component names with the default domain. For example, on a machine
+called dictionary.ref.example, the domain thesaurus would be changed to 
+thesaurus.ref.example inside the resolver. For details of what your resolver
+actually does, consult your man pages for resolver and resolv.conf.
+
++----------------------------------------------------------+
+|rewrite_headers|Use: dnslookup|Type: boolean|Default: true|
++----------------------------------------------------------+
+
+If the domain name in the address that is being processed is not fully
+qualified, it may be expanded to its full form by a DNS lookup. For example, if
+an address is specified as dormouse@teaparty, the domain might be expanded to 
+teaparty.wonderland.fict.example. Domain expansion can also occur as a result
+of setting the widen_domains option. If rewrite_headers is true, all
+occurrences of the abbreviated domain name in any Bcc:, Cc:, From:, Reply-to:, 
+Sender:, and To: header lines of the message are rewritten with the full domain
+name.
+
+This option should be turned off only when it is known that no message is ever
+going to be sent outside an environment where the abbreviation makes sense.
+
+When an MX record is looked up in the DNS and matches a wildcard record, name
+servers normally return a record containing the name that has been looked up,
+making it impossible to detect whether a wildcard was present or not. However,
+some name servers have recently been seen to return the wildcard entry. If the
+name returned by a DNS lookup begins with an asterisk, it is not used for
+header rewriting.
+
++--------------------------------------------------------------------+
+|same_domain_copy_routing|Use: dnslookup|Type: boolean|Default: false|
++--------------------------------------------------------------------+
+
+Addresses with the same domain are normally routed by the dnslookup router to
+the same list of hosts. However, this cannot be presumed, because the router
+options and preconditions may refer to the local part of the address. By
+default, therefore, Exim routes each address in a message independently. DNS
+servers run caches, so repeated DNS lookups are not normally expensive, and in
+any case, personal messages rarely have more than a few recipients.
+
+If you are running mailing lists with large numbers of subscribers at the same
+domain, and you are using a dnslookup router which is independent of the local
+part, you can set same_domain_copy_routing to bypass repeated DNS lookups for
+identical domains in one message. In this case, when dnslookup routes an
+address to a remote transport, any other unrouted addresses in the message that
+have the same domain are automatically given the same routing without
+processing them independently, provided the following conditions are met:
+
+  * No router that processed the address specified headers_add or 
+    headers_remove.
+
+  * The router did not change the address in any way, for example, by
+    "widening" the domain.
+
++----------------------------------------------------------+
+|search_parents|Use: dnslookup|Type: boolean|Default: false|
++----------------------------------------------------------+
+
+When this option is true, the resolver option RES_DNSRCH is set for DNS
+lookups. This is different from the qualify_single option in that it applies to
+domains containing dots. Typically, but not standardly, it causes the resolver
+to search for the name in the current domain and in parent domains. For
+example, on a machine in the fict.example domain, if looking up 
+teaparty.wonderland failed, the resolver would try 
+teaparty.wonderland.fict.example. For details of what your resolver actually
+does, consult your man pages for resolver and resolv.conf.
+
+Setting this option true can cause problems in domains that have a wildcard MX
+record, because any domain that does not have its own MX record matches the
+local wildcard.
+
++-----------------------------------------------------------------+
+|srv_fail_domains|Use: dnslookup|Type: domain list*|Default: unset|
++-----------------------------------------------------------------+
+
+If the DNS lookup for SRV records for one of the domains in this list causes a
+DNS lookup error, Exim behaves as if no SRV records were found. See section
+17.1 for more discussion.
+
++-------------------------------------------------------------+
+|widen_domains|Use: dnslookup|Type: string list|Default: unset|
++-------------------------------------------------------------+
+
+If a DNS lookup fails and this option is set, each of its strings in turn is
+added onto the end of the domain, and the lookup is tried again. For example,
+if
+
+widen_domains = fict.example:ref.example
+
+is set and a lookup of klingon.dictionary fails, 
+klingon.dictionary.fict.example is looked up, and if this fails, 
+klingon.dictionary.ref.example is tried. Note that the qualify_single and 
+search_parents options can cause some widening to be undertaken inside the DNS
+resolver. widen_domains is not applied to sender addresses when verifying,
+unless rewrite_headers is false (not the default).
+
+
+17.4 Effect of qualify_single and search_parents
+------------------------------------------------
+
+When a domain from an envelope recipient is changed by the resolver as a result
+of the qualify_single or search_parents options, Exim rewrites the
+corresponding address in the message's header lines unless rewrite_headers is
+set false. Exim then re-routes the address, using the full domain.
+
+These two options affect only the DNS lookup that takes place inside the router
+for the domain of the address that is being routed. They do not affect lookups
+such as that implied by
+
+domains = @mx_any
+
+that may happen while processing a router precondition before the router is
+entered. No widening ever takes place for these lookups.
+
+
+
+===============================================================================
+18. THE IPLITERAL ROUTER
+
+This router has no private options. Unless it is being used purely for
+verification (see verify_only) a transport is required to be defined by the
+generic transport option. The router accepts the address if its domain part
+takes the form of an RFC 2822 domain literal. For example, the ipliteral router
+handles the address
+
+root@[192.168.1.1]
+
+by setting up delivery to the host with that IP address. IPv4 domain literals
+consist of an IPv4 address enclosed in square brackets. IPv6 domain literals
+are similar, but the address is preceded by "ipv6:". For example:
+
+postmaster@[ipv6:fe80::a00:20ff:fe86:a061.5678]
+
+Exim allows "ipv4:" before IPv4 addresses, for consistency, and on the grounds
+that sooner or later somebody will try it.
+
+If the IP address matches something in ignore_target_hosts, the router
+declines. If an IP literal turns out to refer to the local host, the generic 
+self option determines what happens.
+
+The RFCs require support for domain literals; however, their use is
+controversial in today's Internet. If you want to use this router, you must
+also set the main configuration option allow_domain_literals. Otherwise, Exim
+will not recognize the domain literal syntax in addresses.
+
+
+
+===============================================================================
+19. THE IPLOOKUP ROUTER
+
+The iplookup router was written to fulfil a specific requirement in Cambridge
+University (which in fact no longer exists). For this reason, it is not
+included in the binary of Exim by default. If you want to include it, you must
+set
+
+ROUTER_IPLOOKUP=yes
+
+in your Local/Makefile configuration file.
+
+The iplookup router routes an address by sending it over a TCP or UDP
+connection to one or more specific hosts. The host can then return the same or
+a different address - in effect rewriting the recipient address in the
+message's envelope. The new address is then passed on to subsequent routers. If
+this process fails, the address can be passed on to other routers, or delivery
+can be deferred. Since iplookup is just a rewriting router, a transport must
+not be specified for it.
+
++-----------------------------------------------+
+|hosts|Use: iplookup|Type: string|Default: unset|
++-----------------------------------------------+
+
+This option must be supplied. Its value is a colon-separated list of host
+names. The hosts are looked up using gethostbyname() (or getipnodebyname() when
+available) and are tried in order until one responds to the query. If none
+respond, what happens is controlled by optional.
+
++---------------------------------------------------+
+|optional|Use: iplookup|Type: boolean|Default: false|
++---------------------------------------------------+
+
+If optional is true, if no response is obtained from any host, the address is
+passed to the next router, overriding no_more. If optional is false, delivery
+to the address is deferred.
+
++-------------------------------------------+
+|port|Use: iplookup|Type: integer|Default: 0|
++-------------------------------------------+
+
+This option must be supplied. It specifies the port number for the TCP or UDP
+call.
+
++------------------------------------------------+
+|protocol|Use: iplookup|Type: string|Default: udp|
++------------------------------------------------+
+
+This option can be set to "udp" or "tcp" to specify which of the two protocols
+is to be used.
+
++----------------------------------------------------+
+|query|Use: iplookup|Type: string*|Default: see below|
++----------------------------------------------------+
+
+This defines the content of the query that is sent to the remote hosts. The
+default value is:
+
+$local_part@$domain $local_part@$domain
+
+The repetition serves as a way of checking that a response is to the correct
+query in the default case (see response_pattern below).
+
++--------------------------------------------------+
+|reroute|Use: iplookup|Type: string*|Default: unset|
++--------------------------------------------------+
+
+If this option is not set, the rerouted address is precisely the byte string
+returned by the remote host, up to the first white space, if any. If set, the
+string is expanded to form the rerouted address. It can include parts matched
+in the response by response_pattern by means of numeric variables such as $1,
+$2, etc. The variable $0 refers to the entire input string, whether or not a
+pattern is in use. In all cases, the rerouted address must end up in the form 
+local_part@domain.
+
++----------------------------------------------------------+
+|response_pattern|Use: iplookup|Type: string|Default: unset|
++----------------------------------------------------------+
+
+This option can be set to a regular expression that is applied to the string
+returned from the remote host. If the pattern does not match the response, the
+router declines. If response_pattern is not set, no checking of the response is
+done, unless the query was defaulted, in which case there is a check that the
+text returned after the first white space is the original address. This checks
+that the answer that has been received is in response to the correct question.
+For example, if the response is just a new domain, the following could be used:
+
+response_pattern = ^([^@]+)$
+reroute = $local_part@$1
+
++--------------------------------------------+
+|timeout|Use: iplookup|Type: time|Default: 5s|
++--------------------------------------------+
+
+This specifies the amount of time to wait for a response from the remote
+machine. The same timeout is used for the connect() function for a TCP call. It
+does not apply to UDP.
+
+
+
+===============================================================================
+20. THE MANUALROUTE ROUTER
+
+The manualroute router is so-called because it provides a way of manually
+routing an address according to its domain. It is mainly used when you want to
+route addresses to remote hosts according to your own rules, bypassing the
+normal DNS routing that looks up MX records. However, manualroute can also
+route to local transports, a facility that may be useful if you want to save
+messages for dial-in hosts in local files.
+
+The manualroute router compares a list of domain patterns with the domain it is
+trying to route. If there is no match, the router declines. Each pattern has
+associated with it a list of hosts and some other optional data, which may
+include a transport. The combination of a pattern and its data is called a
+"routing rule". For patterns that do not have an associated transport, the
+generic transport option must specify a transport, unless the router is being
+used purely for verification (see verify_only).
+
+In the case of verification, matching the domain pattern is sufficient for the
+router to accept the address. When actually routing an address for delivery, an
+address that matches a domain pattern is queued for the associated transport.
+If the transport is not a local one, a host list must be associated with the
+pattern; IP addresses are looked up for the hosts, and these are passed to the
+transport along with the mail address. For local transports, a host list is
+optional. If it is present, it is passed in $host as a single text string.
+
+The list of routing rules can be provided as an inline string in route_list, or
+the data can be obtained by looking up the domain in a file or database by
+setting route_data. Only one of these settings may appear in any one instance
+of manualroute. The format of routing rules is described below, following the
+list of private options.
+
+
+20.1 Private options for manualroute
+------------------------------------
+
+The private options for the manualroute router are as follows:
+
++-------------------------------------------------------------+
+|host_all_ignored|Use: manualroute|Type: string|Default: defer|
++-------------------------------------------------------------+
+
+See host_find_failed.
+
++--------------------------------------------------------------+
+|host_find_failed|Use: manualroute|Type: string|Default: freeze|
++--------------------------------------------------------------+
+
+This option controls what happens when manualroute tries to find an IP address
+for a host, and the host does not exist. The option can be set to one of the
+following values:
+
+decline
+defer
+fail
+freeze
+ignore
+pass
+
+The default ("freeze") assumes that this state is a serious configuration
+error. The difference between "pass" and "decline" is that the former forces
+the address to be passed to the next router (or the router defined by 
+pass_router), overriding no_more, whereas the latter passes the address to the
+next router only if more is true.
+
+The value "ignore" causes Exim to completely ignore a host whose IP address
+cannot be found. If all the hosts in the list are ignored, the behaviour is
+controlled by the host_all_ignored option. This takes the same values as 
+host_find_failed, except that it cannot be set to "ignore".
+
+The host_find_failed option applies only to a definite "does not exist" state;
+if a host lookup gets a temporary error, delivery is deferred unless the
+generic pass_on_timeout option is set.
+
++-------------------------------------------------------------+
+|hosts_randomize|Use: manualroute|Type: boolean|Default: false|
++-------------------------------------------------------------+
+
+If this option is set, the order of the items in a host list in a routing rule
+is randomized each time the list is used, unless an option in the routing rule
+overrides (see below). Randomizing the order of a host list can be used to do
+crude load sharing. However, if more than one mail address is routed by the
+same router to the same host list, the host lists are considered to be the same
+(even though they may be randomized into different orders) for the purpose of
+deciding whether to batch the deliveries into a single SMTP transaction.
+
+When hosts_randomize is true, a host list may be split into groups whose order
+is separately randomized. This makes it possible to set up MX-like behaviour.
+The boundaries between groups are indicated by an item that is just "+" in the
+host list. For example:
+
+route_list = * host1:host2:host3:+:host4:host5
+
+The order of the first three hosts and the order of the last two hosts is
+randomized for each use, but the first three always end up before the last two.
+If hosts_randomize is not set, a "+" item in the list is ignored. If a
+randomized host list is passed to an smtp transport that also has 
+hosts_randomize set, the list is not re-randomized.
+
++--------------------------------------------------------+
+|route_data|Use: manualroute|Type: string*|Default: unset|
++--------------------------------------------------------+
+
+If this option is set, it must expand to yield the data part of a routing rule.
+Typically, the expansion string includes a lookup based on the domain. For
+example:
+
+route_data = ${lookup{$domain}dbm{/etc/routes}}
+
+If the expansion is forced to fail, or the result is an empty string, the
+router declines. Other kinds of expansion failure cause delivery to be
+deferred.
+
++------------------------------------------------------------+
+|route_list|Use: manualroute|Type: string list|Default: unset|
++------------------------------------------------------------+
+
+This string is a list of routing rules, in the form defined below. Note that,
+unlike most string lists, the items are separated by semicolons. This is so
+that they may contain colon-separated host lists.
+
++----------------------------------------------------------------------+
+|same_domain_copy_routing|Use: manualroute|Type: boolean|Default: false|
++----------------------------------------------------------------------+
+
+Addresses with the same domain are normally routed by the manualroute router to
+the same list of hosts. However, this cannot be presumed, because the router
+options and preconditions may refer to the local part of the address. By
+default, therefore, Exim routes each address in a message independently. DNS
+servers run caches, so repeated DNS lookups are not normally expensive, and in
+any case, personal messages rarely have more than a few recipients.
+
+If you are running mailing lists with large numbers of subscribers at the same
+domain, and you are using a manualroute router which is independent of the
+local part, you can set same_domain_copy_routing to bypass repeated DNS lookups
+for identical domains in one message. In this case, when manualroute routes an
+address to a remote transport, any other unrouted addresses in the message that
+have the same domain are automatically given the same routing without
+processing them independently. However, this is only done if headers_add and 
+headers_remove are unset.
+
+
+20.2 Routing rules in route_list
+--------------------------------
+
+The value of route_list is a string consisting of a sequence of routing rules,
+separated by semicolons. If a semicolon is needed in a rule, it can be entered
+as two semicolons. Alternatively, the list separator can be changed as
+described (for colon-separated lists) in section 6.20. Empty rules are ignored.
+The format of each rule is
+
+<domain pattern>  <list of hosts>  <options>
+
+The following example contains two rules, each with a simple domain pattern and
+no options:
+
+route_list = \
+  dict.ref.example  mail-1.ref.example:mail-2.ref.example ; \
+  thes.ref.example  mail-3.ref.example:mail-4.ref.example
+
+The three parts of a rule are separated by white space. The pattern and the
+list of hosts can be enclosed in quotes if necessary, and if they are, the
+usual quoting rules apply. Each rule in a route_list must start with a single
+domain pattern, which is the only mandatory item in the rule. The pattern is in
+the same format as one item in a domain list (see section 10.9), except that it
+may not be the name of an interpolated file. That is, it may be wildcarded, or
+a regular expression, or a file or database lookup (with semicolons doubled,
+because of the use of semicolon as a separator in a route_list).
+
+The rules in route_list are searched in order until one of the patterns matches
+the domain that is being routed. The list of hosts and then options are then
+used as described below. If there is no match, the router declines. When 
+route_list is set, route_data must not be set.
+
+
+20.3 Routing rules in route_data
+--------------------------------
+
+The use of route_list is convenient when there are only a small number of
+routing rules. For larger numbers, it is easier to use a file or database to
+hold the routing information, and use the route_data option instead. The value
+of route_data is a list of hosts, followed by (optional) options. Most
+commonly, route_data is set as a string that contains an expansion lookup. For
+example, suppose we place two routing rules in a file like this:
+
+dict.ref.example:  mail-1.ref.example:mail-2.ref.example
+thes.ref.example:  mail-3.ref.example:mail-4.ref.example
+
+This data can be accessed by setting
+
+route_data = ${lookup{$domain}lsearch{/the/file/name}}
+
+Failure of the lookup results in an empty string, causing the router to
+decline. However, you do not have to use a lookup in route_data. The only
+requirement is that the result of expanding the string is a list of hosts,
+possibly followed by options, separated by white space. The list of hosts must
+be enclosed in quotes if it contains white space.
+
+
+20.4 Format of the list of hosts
+--------------------------------
+
+A list of hosts, whether obtained via route_data or route_list, is always
+separately expanded before use. If the expansion fails, the router declines.
+The result of the expansion must be a colon-separated list of names and/or IP
+addresses, optionally also including ports. If the list is written with spaces,
+it must be protected with quotes. The format of each item in the list is
+described in the next section. The list separator can be changed as described
+in section 6.21.
+
+If the list of hosts was obtained from a route_list item, the following
+variables are set during its expansion:
+
+  * If the domain was matched against a regular expression, the numeric
+    variables $1, $2, etc. may be set. For example:
+
+    route_list = ^domain(\d+)   host-$1.text.example
+
+  * $0 is always set to the entire domain.
+
+  * $1 is also set when partial matching is done in a file lookup.
+
+  * If the pattern that matched the domain was a lookup item, the data that was
+    looked up is available in the expansion variable $value. For example:
+
+    route_list = lsearch;;/some/file.routes  $value
+
+Note the doubling of the semicolon in the pattern that is necessary because
+semicolon is the default route list separator.
+
+
+20.5 Format of one host item
+----------------------------
+
+Each item in the list of hosts can be either a host name or an IP address,
+optionally with an attached port number, or it can be a single "+" (see 
+hosts_randomize). When no port is given, an IP address is not enclosed in
+brackets. When a port is specified, it overrides the port specification on the
+transport. The port is separated from the name or address by a colon. This
+leads to some complications:
+
+  * Because colon is the default separator for the list of hosts, either the
+    colon that specifies a port must be doubled, or the list separator must be
+    changed. The following two examples have the same effect:
+
+    route_list = * "host1.tld::1225 : host2.tld::1226"
+    route_list = * "<+ host1.tld:1225 + host2.tld:1226"
+
+  * When IPv6 addresses are involved, it gets worse, because they contain
+    colons of their own. To make this case easier, it is permitted to enclose
+    an IP address (either v4 or v6) in square brackets if a port number
+    follows. For example:
+
+    route_list = * "</ [10.1.1.1]:1225 / [::1]:1226"
+
+
+20.6 How the list of hosts is used
+----------------------------------
+
+When an address is routed to an smtp transport by manualroute, each of the
+hosts is tried, in the order specified, when carrying out the SMTP delivery.
+However, the order can be changed by setting the hosts_randomize option, either
+on the router (see section 20.1 above), or on the transport.
+
+Hosts may be listed by name or by IP address. An unadorned name in the list of
+hosts is interpreted as a host name. A name that is followed by "/MX" is
+interpreted as an indirection to a sublist of hosts obtained by looking up MX
+records in the DNS. For example:
+
+route_list = *  x.y.z:p.q.r/MX:e.f.g
+
+If this feature is used with a port specifier, the port must come last. For
+example:
+
+route_list = *  dom1.tld/mx::1225
+
+If the hosts_randomize option is set, the order of the items in the list is
+randomized before any lookups are done. Exim then scans the list; for any name
+that is not followed by "/MX" it looks up an IP address. If this turns out to
+be an interface on the local host and the item is not the first in the list,
+Exim discards it and any subsequent items. If it is the first item, what
+happens is controlled by the self option of the router.
+
+A name on the list that is followed by "/MX" is replaced with the list of hosts
+obtained by looking up MX records for the name. This is always a DNS lookup;
+the bydns and byname options (see section 20.7 below) are not relevant here.
+The order of these hosts is determined by the preference values in the MX
+records, according to the usual rules. Because randomizing happens before the
+MX lookup, it does not affect the order that is defined by MX preferences.
+
+If the local host is present in the sublist obtained from MX records, but is
+not the most preferred host in that list, it and any equally or less preferred
+hosts are removed before the sublist is inserted into the main list.
+
+If the local host is the most preferred host in the MX list, what happens
+depends on where in the original list of hosts the "/MX" item appears. If it is
+not the first item (that is, there are previous hosts in the main list), Exim
+discards this name and any subsequent items in the main list.
+
+If the MX item is first in the list of hosts, and the local host is the most
+preferred host, what happens is controlled by the self option of the router.
+
+DNS failures when lookup up the MX records are treated in the same way as DNS
+failures when looking up IP addresses: pass_on_timeout and host_find_failed are
+used when relevant.
+
+The generic ignore_target_hosts option applies to all hosts in the list,
+whether obtained from an MX lookup or not.
+
+
+20.7 How the options are used
+-----------------------------
+
+The options are a sequence of words, space-separated. One of the words can be
+the name of a transport; this overrides the transport option on the router for
+this particular routing rule only. The other words (if present) control
+randomization of the list of hosts on a per-rule basis, and how the IP
+addresses of the hosts are to be found when routing to a remote transport.
+These options are as follows:
+
+  * randomize: randomize the order of the hosts in this list, overriding the
+    setting of hosts_randomize for this routing rule only.
+
+  * no_randomize: do not randomize the order of the hosts in this list,
+    overriding the setting of hosts_randomize for this routing rule only.
+
+  * byname: use getipnodebyname() (gethostbyname() on older systems) to find IP
+    addresses. This function may ultimately cause a DNS lookup, but it may also
+    look in /etc/hosts or other sources of information.
+
+  * bydns: look up address records for the hosts directly in the DNS; fail if
+    no address records are found. If there is a temporary DNS error (such as a
+    timeout), delivery is deferred.
+
+  * ipv4_only: in direct DNS lookups, look up only A records.
+
+  * ipv4_prefer: in direct DNS lookups, sort A records before AAAA records.
+
+For example:
+
+route_list = domain1  host1:host2:host3  randomize bydns;\
+             domain2  host4:host5
+
+If neither byname nor bydns is given, Exim behaves as follows: First, a DNS
+lookup is done. If this yields anything other than HOST_NOT_FOUND, that result
+is used. Otherwise, Exim goes on to try a call to getipnodebyname() or
+gethostbyname(), and the result of the lookup is the result of that call.
+
+Warning: It has been discovered that on some systems, if a DNS lookup called
+via getipnodebyname() times out, HOST_NOT_FOUND is returned instead of
+TRY_AGAIN. That is why the default action is to try a DNS lookup first. Only if
+that gives a definite "no such host" is the local function called.
+
+Compatibility: From Exim 4.85 until fixed for 4.90, there was an inadvertent
+constraint that a transport name as an option had to be the last option
+specified.
+
+If no IP address for a host can be found, what happens is controlled by the 
+host_find_failed option.
+
+When an address is routed to a local transport, IP addresses are not looked up.
+The host list is passed to the transport in the $host variable.
+
+
+20.8 Manualroute examples
+-------------------------
+
+In some of the examples that follow, the presence of the remote_smtp transport,
+as defined in the default configuration file, is assumed:
+
+  * The manualroute router can be used to forward all external mail to a smart
+    host. If you have set up, in the main part of the configuration, a named
+    domain list that contains your local domains, for example:
+
+    domainlist local_domains = my.domain.example
+
+    You can arrange for all other domains to be routed to a smart host by
+    making your first router something like this:
+
+    smart_route:
+      driver = manualroute
+      domains = !+local_domains
+      transport = remote_smtp
+      route_list = * smarthost.ref.example
+
+    This causes all non-local addresses to be sent to the single host 
+    smarthost.ref.example. If a colon-separated list of smart hosts is given,
+    they are tried in order (but you can use hosts_randomize to vary the order
+    each time). Another way of configuring the same thing is this:
+
+    smart_route:
+      driver = manualroute
+      transport = remote_smtp
+      route_list = !+local_domains  smarthost.ref.example
+
+    There is no difference in behaviour between these two routers as they
+    stand. However, they behave differently if no_more is added to them. In the
+    first example, the router is skipped if the domain does not match the 
+    domains precondition; the following router is always tried. If the router
+    runs, it always matches the domain and so can never decline. Therefore, 
+    no_more would have no effect. In the second case, the router is never
+    skipped; it always runs. However, if it doesn't match the domain, it
+    declines. In this case no_more would prevent subsequent routers from
+    running.
+
+  * A mail hub is a host which receives mail for a number of domains via MX
+    records in the DNS and delivers it via its own private routing mechanism.
+    Often the final destinations are behind a firewall, with the mail hub being
+    the one machine that can connect to machines both inside and outside the
+    firewall. The manualroute router is usually used on a mail hub to route
+    incoming messages to the correct hosts. For a small number of domains, the
+    routing can be inline, using the route_list option, but for a larger number
+    a file or database lookup is easier to manage.
+
+    If the domain names are in fact the names of the machines to which the mail
+    is to be sent by the mail hub, the configuration can be quite simple. For
+    example:
+
+    hub_route:
+      driver = manualroute
+      transport = remote_smtp
+      route_list = *.rhodes.tvs.example  $domain
+
+    This configuration routes domains that match "*.rhodes.tvs.example" to
+    hosts whose names are the same as the mail domains. A similar approach can
+    be taken if the host name can be obtained from the domain name by a string
+    manipulation that the expansion facilities can handle. Otherwise, a lookup
+    based on the domain can be used to find the host:
+
+    through_firewall:
+      driver = manualroute
+      transport = remote_smtp
+      route_data = ${lookup {$domain} cdb {/internal/host/routes}}
+
+    The result of the lookup must be the name or IP address of the host (or
+    hosts) to which the address is to be routed. If the lookup fails, the route
+    data is empty, causing the router to decline. The address then passes to
+    the next router.
+
+  * You can use manualroute to deliver messages to pipes or files in batched
+    SMTP format for onward transportation by some other means. This is one way
+    of storing mail for a dial-up host when it is not connected. The route list
+    entry can be as simple as a single domain name in a configuration like
+    this:
+
+    save_in_file:
+      driver = manualroute
+      transport = batchsmtp_appendfile
+      route_list = saved.domain.example
+
+    though often a pattern is used to pick up more than one domain. If there
+    are several domains or groups of domains with different transport
+    requirements, different transports can be listed in the routing
+    information:
+
+    save_in_file:
+      driver = manualroute
+      route_list = \
+        *.saved.domain1.example  $domain  batch_appendfile; \
+        *.saved.domain2.example  \
+          ${lookup{$domain}dbm{/domain2/hosts}{$value}fail} \
+          batch_pipe
+
+    The first of these just passes the domain in the $host variable, which
+    doesn't achieve much (since it is also in $domain), but the second does a
+    file lookup to find a value to pass, causing the router to decline to
+    handle the address if the lookup fails.
+
+  * Routing mail directly to UUCP software is a specific case of the use of 
+    manualroute in a gateway to another mail environment. This is an example of
+    one way it can be done:
+
+    # Transport
+    uucp:
+      driver = pipe
+      user = nobody
+      command = /usr/local/bin/uux -r - \
+        ${substr_-5:$host}!rmail ${local_part}
+      return_fail_output = true
+
+    # Router
+    uucphost:
+      transport = uucp
+      driver = manualroute
+      route_data = \
+        ${lookup{$domain}lsearch{/usr/local/exim/uucphosts}}
+
+    The file /usr/local/exim/uucphosts contains entries like
+
+    darksite.ethereal.example:           darksite.UUCP
+
+    It can be set up more simply without adding and removing ".UUCP" but this
+    way makes clear the distinction between the domain name 
+    darksite.ethereal.example and the UUCP host name darksite.
+
+
+
+===============================================================================
+21. THE QUERYPROGRAM ROUTER
+
+The queryprogram router routes an address by running an external command and
+acting on its output. This is an expensive way to route, and is intended mainly
+for use in lightly-loaded systems, or for performing experiments. However, if
+it is possible to use the precondition options (domains, local_parts, etc) to
+skip this router for most addresses, it could sensibly be used in special
+cases, even on a busy host. There are the following private options:
+
++------------------------------------------------------+
+|command|Use: queryprogram|Type: string*|Default: unset|
++------------------------------------------------------+
+
+This option must be set. It specifies the command that is to be run. The
+command is split up into a command name and arguments, and then each is
+expanded separately (exactly as for a pipe transport, described in chapter 29).
+
++-----------------------------------------------------------+
+|command_group|Use: queryprogram|Type: string|Default: unset|
++-----------------------------------------------------------+
+
+This option specifies a gid to be set when running the command while routing an
+address for deliver. It must be set if command_user specifies a numerical uid.
+If it begins with a digit, it is interpreted as the numerical value of the gid.
+Otherwise it is looked up using getgrnam().
+
++----------------------------------------------------------+
+|command_user|Use: queryprogram|Type: string|Default: unset|
++----------------------------------------------------------+
+
+This option must be set. It specifies the uid which is set when running the
+command while routing an address for delivery. If the value begins with a
+digit, it is interpreted as the numerical value of the uid. Otherwise, it is
+looked up using getpwnam() to obtain a value for the uid and, if command_group
+is not set, a value for the gid also.
+
+Warning: Changing uid and gid is possible only when Exim is running as root,
+which it does during a normal delivery in a conventional configuration.
+However, when an address is being verified during message reception, Exim is
+usually running as the Exim user, not as root. If the queryprogram router is
+called from a non-root process, Exim cannot change uid or gid before running
+the command. In this circumstance the command runs under the current uid and
+gid.
+
++-----------------------------------------------------------+
+|current_directory|Use: queryprogram|Type: string|Default: /|
++-----------------------------------------------------------+
+
+This option specifies an absolute path which is made the current directory
+before running the command.
+
++------------------------------------------------+
+|timeout|Use: queryprogram|Type: time|Default: 1h|
++------------------------------------------------+
+
+If the command does not complete within the timeout period, its process group
+is killed and the message is frozen. A value of zero time specifies no timeout.
+
+The standard output of the command is connected to a pipe, which is read when
+the command terminates. It should consist of a single line of output,
+containing up to five fields, separated by white space. The maximum length of
+the line is 1023 characters. Longer lines are silently truncated. The first
+field is one of the following words (case-insensitive):
+
+  * Accept: routing succeeded; the remaining fields specify what to do (see
+    below).
+
+  * Decline: the router declines; pass the address to the next router, unless 
+    no_more is set.
+
+  * Fail: routing failed; do not pass the address to any more routers. Any
+    subsequent text on the line is an error message. If the router is run as
+    part of address verification during an incoming SMTP message, the message
+    is included in the SMTP response.
+
+  * Defer: routing could not be completed at this time; try again later. Any
+    subsequent text on the line is an error message which is logged. It is not
+    included in any SMTP response.
+
+  * Freeze: the same as defer, except that the message is frozen.
+
+  * Pass: pass the address to the next router (or the router specified by 
+    pass_router), overriding no_more.
+
+  * Redirect: the message is redirected. The remainder of the line is a list of
+    new addresses, which are routed independently, starting with the first
+    router, or the router specified by redirect_router, if set.
+
+When the first word is accept, the remainder of the line consists of a number
+of keyed data values, as follows (split into two lines here, to fit on the
+page):
+
+ACCEPT TRANSPORT=<transport> HOSTS=<list of hosts>
+LOOKUP=byname|bydns DATA=<text>
+
+The data items can be given in any order, and all are optional. If no transport
+is included, the transport specified by the generic transport option is used.
+The list of hosts and the lookup type are needed only if the transport is an 
+smtp transport that does not itself supply a list of hosts.
+
+The format of the list of hosts is the same as for the manualroute router. As
+well as host names and IP addresses with optional port numbers, as described in
+section 20.5, it may contain names followed by "/MX" to specify sublists of
+hosts that are obtained by looking up MX records (see section 20.6).
+
+If the lookup type is not specified, Exim behaves as follows when trying to
+find an IP address for each host: First, a DNS lookup is done. If this yields
+anything other than HOST_NOT_FOUND, that result is used. Otherwise, Exim goes
+on to try a call to getipnodebyname() or gethostbyname(), and the result of the
+lookup is the result of that call.
+
+If the DATA field is set, its value is placed in the $address_data variable.
+For example, this return line
+
+accept hosts=x1.y.example:x2.y.example data="rule1"
+
+routes the address to the default transport, passing a list of two hosts. When
+the transport runs, the string "rule1" is in $address_data.
+
+
+
+===============================================================================
+22. THE REDIRECT ROUTER
+
+The redirect router handles several kinds of address redirection. Its most
+common uses are for resolving local part aliases from a central alias file
+(usually called /etc/aliases) and for handling users' personal .forward files,
+but it has many other potential uses. The incoming address can be redirected in
+several different ways:
+
+  * It can be replaced by one or more new addresses which are themselves routed
+    independently.
+
+  * It can be routed to be delivered to a given file or directory.
+
+  * It can be routed to be delivered to a specified pipe command.
+
+  * It can cause an automatic reply to be generated.
+
+  * It can be forced to fail, optionally with a custom error message.
+
+  * It can be temporarily deferred, optionally with a custom message.
+
+  * It can be discarded.
+
+The generic transport option must not be set for redirect routers. However,
+there are some private options which define transports for delivery to files
+and pipes, and for generating autoreplies. See the file_transport, 
+pipe_transport and reply_transport descriptions below.
+
+If success DSNs have been requested redirection triggers one and the DSN
+options are not passed any further.
+
+
+22.1 Redirection data
+---------------------
+
+The router operates by interpreting a text string which it obtains either by
+expanding the contents of the data option, or by reading the entire contents of
+a file whose name is given in the file option. These two options are mutually
+exclusive. The first is commonly used for handling system aliases, in a
+configuration like this:
+
+system_aliases:
+  driver = redirect
+  data = ${lookup{$local_part}lsearch{/etc/aliases}}
+
+If the lookup fails, the expanded string in this example is empty. When the
+expansion of data results in an empty string, the router declines. A forced
+expansion failure also causes the router to decline; other expansion failures
+cause delivery to be deferred.
+
+A configuration using file is commonly used for handling users' .forward files,
+like this:
+
+userforward:
+  driver = redirect
+  check_local_user
+  file = $home/.forward
+  no_verify
+
+If the file does not exist, or causes no action to be taken (for example, it is
+empty or consists only of comments), the router declines. Warning: This is not
+the case when the file contains syntactically valid items that happen to yield
+empty addresses, for example, items containing only RFC 2822 address comments.
+
+Tainted data may not be used for a filename.
+
+Warning: It is unwise to use $local_part or $domain directly for redirection,
+as they are provided by a potential attacker. In the examples above,
+$local_part is used for looking up data held locally on the system, and not
+used directly (the second example derives $home via the passsword file or
+database, using $local_part).
+
+
+22.2 Forward files and address verification
+-------------------------------------------
+
+It is usual to set no_verify on redirect routers which handle users' .forward
+files, as in the example above. There are two reasons for this:
+
+  * When Exim is receiving an incoming SMTP message from a remote host, it is
+    running under the Exim uid, not as root. Exim is unable to change uid to
+    read the file as the user, and it may not be able to read it as the Exim
+    user. So in practice the router may not be able to operate.
+
+  * However, even when the router can operate, the existence of a .forward file
+    is unimportant when verifying an address. What should be checked is whether
+    the local part is a valid user name or not. Cutting out the redirection
+    processing saves some resources.
+
+
+22.3 Interpreting redirection data
+----------------------------------
+
+The contents of the data string, whether obtained from data or file, can be
+interpreted in two different ways:
+
+  * If the allow_filter option is set true, and the data begins with the text "
+    #Exim filter" or "#Sieve filter", it is interpreted as a list of filtering
+    instructions in the form of an Exim or Sieve filter file, respectively.
+    Details of the syntax and semantics of filter files are described in a
+    separate document entitled Exim's interfaces to mail filtering; this
+    document is intended for use by end users.
+
+  * Otherwise, the data must be a comma-separated list of redirection items, as
+    described in the next section.
+
+When a message is redirected to a file (a "mail folder"), the filename given in
+a non-filter redirection list must always be an absolute path. A filter may
+generate a relative path - how this is handled depends on the transport's
+configuration. See section 26.1 for a discussion of this issue for the 
+appendfile transport.
+
+
+22.4 Items in a non-filter redirection list
+-------------------------------------------
+
+When the redirection data is not an Exim or Sieve filter, for example, if it
+comes from a conventional alias or forward file, it consists of a list of
+addresses, filenames, pipe commands, or certain special items (see section 22.6
+below). The special items can be individually enabled or disabled by means of
+options whose names begin with allow_ or forbid_, depending on their default
+values. The items in the list are separated by commas or newlines. If a comma
+is required in an item, the entire item must be enclosed in double quotes.
+
+Lines starting with a # character are comments, and are ignored, and # may also
+appear following a comma, in which case everything between the # and the next
+newline character is ignored.
+
+If an item is entirely enclosed in double quotes, these are removed. Otherwise
+double quotes are retained because some forms of mail address require their use
+(but never to enclose the entire address). In the following description, "item"
+refers to what remains after any surrounding double quotes have been removed.
+
+Warning: If you use an Exim expansion to construct a redirection address, and
+the expansion contains a reference to $local_part, you should make use of the 
+quote_local_part expansion operator, in case the local part contains special
+characters. For example, to redirect all mail for the domain obsolete.example,
+retaining the existing local part, you could use this setting:
+
+data = ${quote_local_part:$local_part}@newdomain.example
+
+
+22.5 Redirecting to a local mailbox
+-----------------------------------
+
+A redirection item may safely be the same as the address currently under
+consideration. This does not cause a routing loop, because a router is
+automatically skipped if any ancestor of the address that is being processed is
+the same as the current address and was processed by the current router. Such
+an address is therefore passed to the following routers, so it is handled as if
+there were no redirection. When making this loop-avoidance test, the complete
+local part, including any prefix or suffix, is used.
+
+Specifying the same local part without a domain is a common usage in personal
+filter files when the user wants to have messages delivered to the local
+mailbox and also forwarded elsewhere. For example, the user whose login is cleo
+might have a .forward file containing this:
+
+cleo, cleopatra@egypt.example
+
+For compatibility with other MTAs, such unqualified local parts may be preceded
+by "\", but this is not a requirement for loop prevention. However, it does
+make a difference if more than one domain is being handled synonymously.
+
+If an item begins with "\" and the rest of the item parses as a valid RFC 2822
+address that does not include a domain, the item is qualified using the domain
+of the incoming address. In the absence of a leading "\", unqualified addresses
+are qualified using the value in qualify_recipient, but you can force the
+incoming domain to be used by setting qualify_preserve_domain.
+
+Care must be taken if there are alias names for local users. Consider an MTA
+handling a single local domain where the system alias file contains:
+
+Sam.Reman: spqr
+
+Now suppose that Sam (whose login id is spqr) wants to save copies of messages
+in the local mailbox, and also forward copies elsewhere. He creates this
+forward file:
+
+Sam.Reman, spqr@reme.elsewhere.example
+
+With these settings, an incoming message addressed to Sam.Reman fails. The 
+redirect router for system aliases does not process Sam.Reman the second time
+round, because it has previously routed it, and the following routers
+presumably cannot handle the alias. The forward file should really contain
+
+spqr, spqr@reme.elsewhere.example
+
+but because this is such a common error, the check_ancestor option (see below)
+exists to provide a way to get round it. This is normally set on a redirect
+router that is handling users' .forward files.
+
+
+22.6 Special items in redirection lists
+---------------------------------------
+
+In addition to addresses, the following types of item may appear in redirection
+lists (that is, in non-filter redirection data):
+
+  * An item is treated as a pipe command if it begins with "|" and does not
+    parse as a valid RFC 2822 address that includes a domain. A transport for
+    running the command must be specified by the pipe_transport option.
+    Normally, either the router or the transport specifies a user and a group
+    under which to run the delivery. The default is to use the Exim user and
+    group.
+
+    Single or double quotes can be used for enclosing the individual arguments
+    of the pipe command; no interpretation of escapes is done for single
+    quotes. If the command contains a comma character, it is necessary to put
+    the whole item in double quotes, for example:
+
+    "|/some/command ready,steady,go"
+
+    since items in redirection lists are terminated by commas. Do not, however,
+    quote just the command. An item such as
+
+    |"/some/command ready,steady,go"
+
+    is interpreted as a pipe with a rather strange command name, and no
+    arguments.
+
+    Note that the above example assumes that the text comes from a lookup
+    source of some sort, so that the quotes are part of the data. If composing
+    a redirect router with a data option directly specifying this command, the
+    quotes will be used by the configuration parser to define the extent of one
+    string, but will not be passed down into the redirect router itself. There
+    are two main approaches to get around this: escape quotes to be part of the
+    data itself, or avoid using this mechanism and instead create a custom
+    transport with the command option set and reference that transport from an 
+    accept router.
+
+  * An item is interpreted as a path name if it begins with "/" and does not
+    parse as a valid RFC 2822 address that includes a domain. For example,
+
+    /home/world/minbari
+
+    is treated as a filename, but
+
+    /s=molari/o=babylon/@x400gate.way
+
+    is treated as an address. For a filename, a transport must be specified
+    using the file_transport option. However, if the generated path name ends
+    with a forward slash character, it is interpreted as a directory name
+    rather than a filename, and directory_transport is used instead.
+
+    Normally, either the router or the transport specifies a user and a group
+    under which to run the delivery. The default is to use the Exim user and
+    group.
+
+    However, if a redirection item is the path /dev/null, delivery to it is
+    bypassed at a high level, and the log entry shows "**bypassed**" instead of
+    a transport name. In this case the user and group are not used.
+
+  * If an item is of the form
+
+    :include:<path name>
+
+    a list of further items is taken from the given file and included at that
+    point. Note: Such a file can not be a filter file; it is just an
+    out-of-line addition to the list. The items in the included list are
+    separated by commas or newlines and are not subject to expansion. If this
+    is the first item in an alias list in an lsearch file, a colon must be used
+    to terminate the alias name. This example is incorrect:
+
+    list1    :include:/opt/lists/list1
+
+    It must be given as
+
+    list1:   :include:/opt/lists/list1
+
+    Tainted data may not be used for a filename.
+
+  * Sometimes you want to throw away mail to a particular local part. Making
+    the data option expand to an empty string does not work, because that
+    causes the router to decline. Instead, the alias item
+
+    :blackhole:
+
+    can be used. It does what its name implies. No delivery is done, and no
+    error message is generated. This has the same effect as specifying /dev/
+    null as a destination, but it can be independently disabled.
+
+    Warning: If :blackhole: appears anywhere in a redirection list, no delivery
+    is done for the original local part, even if other redirection items are
+    present. If you are generating a multi-item list (for example, by reading a
+    database) and need the ability to provide a no-op item, you must use /dev/
+    null.
+
+  * An attempt to deliver a particular address can be deferred or forced to
+    fail by redirection items of the form
+
+    :defer:
+    :fail:
+
+    respectively. When a redirection list contains such an item, it applies to
+    the entire redirection; any other items in the list are ignored. Any text
+    following :fail: or :defer: is placed in the error text associated with the
+    failure. For example, an alias file might contain:
+
+    X.Employee:  :fail: Gone away, no forwarding address
+
+    In the case of an address that is being verified from an ACL or as the
+    subject of a VRFY command, the text is included in the SMTP error response
+    by default. The text is not included in the response to an EXPN command. In
+    non-SMTP cases the text is included in the error message that Exim
+    generates.
+
+    By default for verify, Exim sends a 451 SMTP code for a :defer:, and 550
+    for :fail:. However, if the message starts with three digits followed by a
+    space, optionally followed by an extended code of the form n.n.n, also
+    followed by a space, and the very first digit is the same as the default
+    error code, the code from the message is used instead. If the very first
+    digit is incorrect, a panic error is logged, and the default code is used.
+    You can suppress the use of the supplied code in a redirect router by
+    setting the forbid_smtp_code option true. In this case, any SMTP code is
+    quietly ignored.
+
+    In an ACL, an explicitly provided message overrides the default, but the
+    default message is available in the variable $acl_verify_message and can
+    therefore be included in a custom message if this is desired.
+
+    Normally the error text is the rest of the redirection list - a comma does
+    not terminate it - but a newline does act as a terminator. Newlines are not
+    normally present in alias expansions. In lsearch lookups they are removed
+    as part of the continuation process, but they may exist in other kinds of
+    lookup and in :include: files.
+
+    During routing for message delivery (as opposed to verification), a
+    redirection containing :fail: causes an immediate failure of the incoming
+    address, whereas :defer: causes the message to remain in the queue so that
+    a subsequent delivery attempt can happen at a later time. If an address is
+    deferred for too long, it will ultimately fail, because the normal retry
+    rules still apply.
+
+  * Sometimes it is useful to use a single-key search type with a default (see
+    chapter 9) to look up aliases. However, there may be a need for exceptions
+    to the default. These can be handled by aliasing them to :unknown:. This
+    differs from :fail: in that it causes the redirect router to decline,
+    whereas :fail: forces routing to fail. A lookup which results in an empty
+    redirection list has the same effect.
+
+
+22.7 Duplicate addresses
+------------------------
+
+Exim removes duplicate addresses from the list to which it is delivering, so as
+to deliver just one copy to each address. This does not apply to deliveries
+routed to pipes by different immediate parent addresses, but an indirect
+aliasing scheme of the type
+
+pipe:       |/some/command $local_part
+localpart1: pipe
+localpart2: pipe
+
+does not work with a message that is addressed to both local parts, because
+when the second is aliased to the intermediate local part "pipe" it gets
+discarded as being the same as a previously handled address. However, a scheme
+such as
+
+localpart1: |/some/command $local_part
+localpart2: |/some/command $local_part
+
+does result in two different pipe deliveries, because the immediate parents of
+the pipes are distinct.
+
+
+22.8 Repeated redirection expansion
+-----------------------------------
+
+When a message cannot be delivered to all of its recipients immediately,
+leading to two or more delivery attempts, redirection expansion is carried out
+afresh each time for those addresses whose children were not all previously
+delivered. If redirection is being used as a mailing list, this can lead to new
+members of the list receiving copies of old messages. The one_time option can
+be used to avoid this.
+
+
+22.9 Errors in redirection lists
+--------------------------------
+
+If skip_syntax_errors is set, a malformed address that causes a parsing error
+is skipped, and an entry is written to the main log. This may be useful for
+mailing lists that are automatically managed. Otherwise, if an error is
+detected while generating the list of new addresses, the original address is
+deferred. See also syntax_errors_to.
+
+
+22.10 Private options for the redirect router
+---------------------------------------------
+
+The private options for the redirect router are as follows:
+
++------------------------------------------------------+
+|allow_defer|Use: redirect|Type: boolean|Default: false|
++------------------------------------------------------+
+
+Setting this option allows the use of :defer: in non-filter redirection data,
+or the defer command in an Exim filter file.
+
++-----------------------------------------------------+
+|allow_fail|Use: redirect|Type: boolean|Default: false|
++-----------------------------------------------------+
+
+If this option is true, the :fail: item can be used in a redirection list, and
+the fail command may be used in an Exim filter file.
+
++-------------------------------------------------------+
+|allow_filter|Use: redirect|Type: boolean|Default: false|
++-------------------------------------------------------+
+
+Setting this option allows Exim to interpret redirection data that starts with
+"#Exim filter" or "#Sieve filter" as a set of filtering instructions. There are
+some features of Exim filter files that some administrators may wish to lock
+out; see the forbid_filter_xxx options below.
+
+It is also possible to lock out Exim filters or Sieve filters while allowing
+the other type; see forbid_exim_filter and forbid_sieve_filter.
+
+The filter is run using the uid and gid set by the generic user and group
+options. These take their defaults from the password data if check_local_user
+is set, so in the normal case of users' personal filter files, the filter is
+run as the relevant user. When allow_filter is set true, Exim insists that
+either check_local_user or user is set.
+
++-------------------------------------------------------+
+|allow_freeze|Use: redirect|Type: boolean|Default: false|
++-------------------------------------------------------+
+
+Setting this option allows the use of the freeze command in an Exim filter.
+This command is more normally encountered in system filters, and is disabled by
+default for redirection filters because it isn't something you usually want to
+let ordinary users do.
+
++---------------------------------------------------------+
+|check_ancestor|Use: redirect|Type: boolean|Default: false|
++---------------------------------------------------------+
+
+This option is concerned with handling generated addresses that are the same as
+some address in the list of redirection ancestors of the current address.
+Although it is turned off by default in the code, it is set in the default
+configuration file for handling users' .forward files. It is recommended for
+this use of the redirect router.
+
+When check_ancestor is set, if a generated address (including the domain) is
+the same as any ancestor of the current address, it is replaced by a copy of
+the current address. This helps in the case where local part A is aliased to B,
+and B has a .forward file pointing back to A. For example, within a single
+domain, the local part "Joe.Bloggs" is aliased to "jb" and  jb/.forward
+contains:
+
+\Joe.Bloggs, <other item(s)>
+
+Without the check_ancestor setting, either local part ("jb" or "joe.bloggs")
+gets processed once by each router and so ends up as it was originally. If "jb"
+is the real mailbox name, mail to "jb" gets delivered (having been turned into
+"joe.bloggs" by the .forward file and back to "jb" by the alias), but mail to
+"joe.bloggs" fails. Setting check_ancestor on the redirect router that handles
+the .forward file prevents it from turning "jb" back into "joe.bloggs" when
+that was the original address. See also the repeat_use option below.
+
++----------------------------------------------------------+
+|check_group|Use: redirect|Type: boolean|Default: see below|
++----------------------------------------------------------+
+
+When the file option is used, the group owner of the file is checked only when
+this option is set. The permitted groups are those listed in the owngroups
+option, together with the user's default group if check_local_user is set. If
+the file has the wrong group, routing is deferred. The default setting for this
+option is true if check_local_user is set and the modemask option permits the
+group write bit, or if the owngroups option is set. Otherwise it is false, and
+no group check occurs.
+
++----------------------------------------------------------+
+|check_owner|Use: redirect|Type: boolean|Default: see below|
++----------------------------------------------------------+
+
+When the file option is used, the owner of the file is checked only when this
+option is set. If check_local_user is set, the local user is permitted;
+otherwise the owner must be one of those listed in the owners option. The
+default value for this option is true if check_local_user or owners is set.
+Otherwise the default is false, and no owner check occurs.
+
++-----------------------------------------------+
+|data|Use: redirect|Type: string*|Default: unset|
++-----------------------------------------------+
+
+This option is mutually exclusive with file. One or other of them must be set,
+but not both. The contents of data are expanded, and then used as the list of
+forwarding items, or as a set of filtering instructions. If the expansion is
+forced to fail, or the result is an empty string or a string that has no effect
+(consists entirely of comments), the router declines.
+
+When filtering instructions are used, the string must begin with "#Exim
+filter", and all comments in the string, including this initial one, must be
+terminated with newline characters. For example:
+
+data = #Exim filter\n\
+       if $h_to: contains Exim then save $home/mail/exim endif
+
+If you are reading the data from a database where newlines cannot be included,
+you can use the ${sg} expansion item to turn the escape string of your choice
+into a newline.
+
++--------------------------------------------------------------+
+|directory_transport|Use: redirect|Type: string*|Default: unset|
++--------------------------------------------------------------+
+
+A redirect router sets up a direct delivery to a directory when a path name
+ending with a slash is specified as a new "address". The transport used is
+specified by this option, which, after expansion, must be the name of a
+configured transport. This should normally be an appendfile transport.
+
++-----------------------------------------------+
+|file|Use: redirect|Type: string*|Default: unset|
++-----------------------------------------------+
+
+This option specifies the name of a file that contains the redirection data. It
+is mutually exclusive with the data option. The string is expanded before use;
+if the expansion is forced to fail, the router declines. Other expansion
+failures cause delivery to be deferred. The result of a successful expansion
+must be an absolute path. The entire file is read and used as the redirection
+data. If the data is an empty string or a string that has no effect (consists
+entirely of comments), the router declines.
+
+If the attempt to open the file fails with a "does not exist" error, Exim runs
+a check on the containing directory, unless ignore_enotdir is true (see below).
+If the directory does not appear to exist, delivery is deferred. This can
+happen when users' .forward files are in NFS-mounted directories, and there is
+a mount problem. If the containing directory does exist, but the file does not,
+the router declines.
+
++---------------------------------------------------------+
+|file_transport|Use: redirect|Type: string*|Default: unset|
++---------------------------------------------------------+
+
+A redirect router sets up a direct delivery to a file when a path name not
+ending in a slash is specified as a new "address". The transport used is
+specified by this option, which, after expansion, must be the name of a
+configured transport. This should normally be an appendfile transport. When it
+is running, the filename is in $address_file.
+
++-------------------------------------------------------------+
+|filter_prepend_home|Use: redirect|Type: boolean|Default: true|
++-------------------------------------------------------------+
+
+When this option is true, if a save command in an Exim filter specifies a
+relative path, and $home is defined, it is automatically prepended to the
+relative path. If this option is set false, this action does not happen. The
+relative path is then passed to the transport unmodified.
+
++-----------------------------------------------------------+
+|forbid_blackhole|Use: redirect|Type: boolean|Default: false|
++-----------------------------------------------------------+
+
+If this option is true, the :blackhole: item may not appear in a redirection
+list.
+
++-------------------------------------------------------------+
+|forbid_exim_filter|Use: redirect|Type: boolean|Default: false|
++-------------------------------------------------------------+
+
+If this option is set true, only Sieve filters are permitted when allow_filter
+is true.
+
++------------------------------------------------------+
+|forbid_file|Use: redirect|Type: boolean|Default: false|
++------------------------------------------------------+
+
+If this option is true, this router may not generate a new address that
+specifies delivery to a local file or directory, either from a filter or from a
+conventional forward file. This option is forced to be true if one_time is set.
+It applies to Sieve filters as well as to Exim filters, but if true, it locks
+out the Sieve's "keep" facility.
+
++---------------------------------------------------------------+
+|forbid_filter_dlfunc|Use: redirect|Type: boolean|Default: false|
++---------------------------------------------------------------+
+
+If this option is true, string expansions in Exim filters are not allowed to
+make use of the dlfunc expansion facility to run dynamically loaded functions.
+
++-------------------------------------------------------------------+
+|forbid_filter_existstest|Use: redirect|Type: boolean|Default: false|
++-------------------------------------------------------------------+
+
+If this option is true, string expansions in Exim filters are not allowed to
+make use of the exists condition or the stat expansion item.
+
++-----------------------------------------------------------------+
+|forbid_filter_logwrite|Use: redirect|Type: boolean|Default: false|
++-----------------------------------------------------------------+
+
+If this option is true, use of the logging facility in Exim filters is not
+permitted. Logging is in any case available only if the filter is being run
+under some unprivileged uid (which is normally the case for ordinary users'
+.forward files).
+
++---------------------------------------------------------------+
+|forbid_filter_lookup|Use: redirect|Type: boolean|Default: false|
++---------------------------------------------------------------+
+
+If this option is true, string expansions in Exim filter files are not allowed
+to make use of lookup items.
+
++-------------------------------------------------------------+
+|forbid_filter_perl|Use: redirect|Type: boolean|Default: false|
++-------------------------------------------------------------+
+
+This option has an effect only if Exim is built with embedded Perl support. If
+it is true, string expansions in Exim filter files are not allowed to make use
+of the embedded Perl support.
+
++-----------------------------------------------------------------+
+|forbid_filter_readfile|Use: redirect|Type: boolean|Default: false|
++-----------------------------------------------------------------+
+
+If this option is true, string expansions in Exim filter files are not allowed
+to make use of readfile items.
+
++-------------------------------------------------------------------+
+|forbid_filter_readsocket|Use: redirect|Type: boolean|Default: false|
++-------------------------------------------------------------------+
+
+If this option is true, string expansions in Exim filter files are not allowed
+to make use of readsocket items.
+
++--------------------------------------------------------------+
+|forbid_filter_reply|Use: redirect|Type: boolean|Default: false|
++--------------------------------------------------------------+
+
+If this option is true, this router may not generate an automatic reply
+message. Automatic replies can be generated only from Exim or Sieve filter
+files, not from traditional forward files. This option is forced to be true if 
+one_time is set.
+
++------------------------------------------------------------+
+|forbid_filter_run|Use: redirect|Type: boolean|Default: false|
++------------------------------------------------------------+
+
+If this option is true, string expansions in Exim filter files are not allowed
+to make use of run items.
+
++---------------------------------------------------------+
+|forbid_include|Use: redirect|Type: boolean|Default: false|
++---------------------------------------------------------+
+
+If this option is true, items of the form
+
+:include:<path name>
+
+are not permitted in non-filter redirection lists.
+
++------------------------------------------------------+
+|forbid_pipe|Use: redirect|Type: boolean|Default: false|
++------------------------------------------------------+
+
+If this option is true, this router may not generate a new address which
+specifies delivery to a pipe, either from an Exim filter or from a conventional
+forward file. This option is forced to be true if one_time is set.
+
++--------------------------------------------------------------+
+|forbid_sieve_filter|Use: redirect|Type: boolean|Default: false|
++--------------------------------------------------------------+
+
+If this option is set true, only Exim filters are permitted when allow_filter
+is true.
+
++-----------------------------------------------------------+
+|forbid_smtp_code|Use: redirect|Type: boolean|Default: false|
++-----------------------------------------------------------+
+
+If this option is set true, any SMTP error codes that are present at the start
+of messages specified for ":defer:" or ":fail:" are quietly ignored, and the
+default codes (451 and 550, respectively) are always used.
+
++---------------------------------------------------------------+
+|hide_child_in_errmsg|Use: redirect|Type: boolean|Default: false|
++---------------------------------------------------------------+
+
+If this option is true, it prevents Exim from quoting a child address if it
+generates a bounce or delay message for it. Instead it says "an address
+generated from <the top level address>". Of course, this applies only to
+bounces generated locally. If a message is forwarded to another host, its
+bounce may well quote the generated address.
+
++--------------------------------------------------------+
+|ignore_eacces|Use: redirect|Type: boolean|Default: false|
++--------------------------------------------------------+
+
+If this option is set and an attempt to open a redirection file yields the
+EACCES error (permission denied), the redirect router behaves as if the file
+did not exist.
+
++---------------------------------------------------------+
+|ignore_enotdir|Use: redirect|Type: boolean|Default: false|
++---------------------------------------------------------+
+
+If this option is set and an attempt to open a redirection file yields the
+ENOTDIR error (something on the path is not a directory), the redirect router
+behaves as if the file did not exist.
+
+Setting ignore_enotdir has another effect as well: When a redirect router that
+has the file option set discovers that the file does not exist (the ENOENT
+error), it tries to stat() the parent directory, as a check against unmounted
+NFS directories. If the parent can not be statted, delivery is deferred.
+However, it seems wrong to do this check when ignore_enotdir is set, because
+that option tells Exim to ignore "something on the path is not a directory"
+(the ENOTDIR error). This is a confusing area, because it seems that some
+operating systems give ENOENT where others give ENOTDIR.
+
++-----------------------------------------------------------+
+|include_directory|Use: redirect|Type: string|Default: unset|
++-----------------------------------------------------------+
+
+If this option is set, the path names of any :include: items in a redirection
+list must start with this directory.
+
++-------------------------------------------------------+
+|modemask|Use: redirect|Type: octal integer|Default: 022|
++-------------------------------------------------------+
+
+This specifies mode bits which must not be set for a file specified by the file
+option. If any of the forbidden bits are set, delivery is deferred.
+
++---------------------------------------------------+
+|one_time|Use: redirect|Type: boolean|Default: false|
++---------------------------------------------------+
+
+Sometimes the fact that Exim re-evaluates aliases and reprocesses redirection
+files each time it tries to deliver a message causes a problem when one or more
+of the generated addresses fails be delivered at the first attempt. The problem
+is not one of duplicate delivery - Exim is clever enough to handle that - but
+of what happens when the redirection list changes during the time that the
+message is on Exim's queue. This is particularly true in the case of mailing
+lists, where new subscribers might receive copies of messages that were posted
+before they subscribed.
+
+If one_time is set and any addresses generated by the router fail to deliver at
+the first attempt, the failing addresses are added to the message as "top
+level" addresses, and the parent address that generated them is marked
+"delivered". Thus, redirection does not happen again at the next delivery
+attempt.
+
+Warning 1: Any header line addition or removal that is specified by this router
+would be lost if delivery did not succeed at the first attempt. For this
+reason, the headers_add and headers_remove generic options are not permitted
+when one_time is set.
+
+Warning 2: To ensure that the router generates only addresses (as opposed to
+pipe or file deliveries or auto-replies) forbid_file, forbid_pipe, and 
+forbid_filter_reply are forced to be true when one_time is set.
+
+Warning 3: The unseen generic router option may not be set with one_time.
+
+The original top-level address is remembered with each of the generated
+addresses, and is output in any log messages. However, any intermediate parent
+addresses are not recorded. This makes a difference to the log only if 
+all_parents log selector is set. It is expected that one_time will typically be
+used for mailing lists, where there is normally just one level of expansion.
+
++-----------------------------------------------------+
+|owners|Use: redirect|Type: string list|Default: unset|
++-----------------------------------------------------+
+
+This specifies a list of permitted owners for the file specified by file. This
+list is in addition to the local user when check_local_user is set. See 
+check_owner above.
+
++--------------------------------------------------------+
+|owngroups|Use: redirect|Type: string list|Default: unset|
++--------------------------------------------------------+
+
+This specifies a list of permitted groups for the file specified by file. The
+list is in addition to the local user's primary group when check_local_user is
+set. See check_group above.
+
++---------------------------------------------------------+
+|pipe_transport|Use: redirect|Type: string*|Default: unset|
++---------------------------------------------------------+
+
+A redirect router sets up a direct delivery to a pipe when a string starting
+with a vertical bar character is specified as a new "address". The transport
+used is specified by this option, which, after expansion, must be the name of a
+configured transport. This should normally be a pipe transport. When the
+transport is run, the pipe command is in $address_pipe.
+
++---------------------------------------------------------+
+|qualify_domain|Use: redirect|Type: string*|Default: unset|
++---------------------------------------------------------+
+
+If this option is set, and an unqualified address (one without a domain) is
+generated, and that address would normally be qualified by the global setting
+in qualify_recipient, it is instead qualified with the domain specified by
+expanding this string. If the expansion fails, the router declines. If you want
+to revert to the default, you can have the expansion generate
+$qualify_recipient.
+
+This option applies to all unqualified addresses generated by Exim filters, but
+for traditional .forward files, it applies only to addresses that are not
+preceded by a backslash. Sieve filters cannot generate unqualified addresses.
+
++------------------------------------------------------------------+
+|qualify_preserve_domain|Use: redirect|Type: boolean|Default: false|
++------------------------------------------------------------------+
+
+If this option is set, the router's local qualify_domain option must not be set
+(a configuration error occurs if it is). If an unqualified address (one without
+a domain) is generated, it is qualified with the domain of the parent address
+(the immediately preceding ancestor) instead of the global qualify_recipient
+value. In the case of a traditional .forward file, this applies whether or not
+the address is preceded by a backslash.
+
++----------------------------------------------------+
+|repeat_use|Use: redirect|Type: boolean|Default: true|
++----------------------------------------------------+
+
+If this option is set false, the router is skipped for a child address that has
+any ancestor that was routed by this router. This test happens before any of
+the other preconditions are tested. Exim's default anti-looping rules skip only
+when the ancestor is the same as the current address. See also check_ancestor
+above and the generic redirect_router option.
+
++----------------------------------------------------------+
+|reply_transport|Use: redirect|Type: string*|Default: unset|
++----------------------------------------------------------+
+
+A redirect router sets up an automatic reply when a mail or vacation command is
+used in a filter file. The transport used is specified by this option, which,
+after expansion, must be the name of a configured transport. This should
+normally be an autoreply transport. Other transports are unlikely to do
+anything sensible or useful.
+
++-------------------------------------------------+
+|rewrite|Use: redirect|Type: boolean|Default: true|
++-------------------------------------------------+
+
+If this option is set false, addresses generated by the router are not subject
+to address rewriting. Otherwise, they are treated like new addresses and are
+rewritten according to the global rewriting rules.
+
++-----------------------------------------------------------+
+|sieve_subaddress|Use: redirect|Type: string*|Default: unset|
++-----------------------------------------------------------+
+
+The value of this option is passed to a Sieve filter to specify the :subaddress
+part of an address.
+
++------------------------------------------------------------+
+|sieve_useraddress|Use: redirect|Type: string*|Default: unset|
++------------------------------------------------------------+
+
+The value of this option is passed to a Sieve filter to specify the :user part
+of an address. However, if it is unset, the entire original local part
+(including any prefix or suffix) is used for :user.
+
++-------------------------------------------------------------------+
+|sieve_vacation_directory|Use: redirect|Type: string*|Default: unset|
++-------------------------------------------------------------------+
+
+To enable the "vacation" extension for Sieve filters, you must set 
+sieve_vacation_directory to the directory where vacation databases are held (do
+not put anything else in that directory), and ensure that the reply_transport
+option refers to an autoreply transport. Each user needs their own directory;
+Exim will create it if necessary.
+
++-------------------------------------------------------------+
+|skip_syntax_errors|Use: redirect|Type: boolean|Default: false|
++-------------------------------------------------------------+
+
+If skip_syntax_errors is set, syntactically malformed addresses in non-filter
+redirection data are skipped, and each failing address is logged. If 
+syntax_errors_to is set, a message is sent to the address it defines, giving
+details of the failures. If syntax_errors_text is set, its contents are
+expanded and placed at the head of the error message generated by 
+syntax_errors_to. Usually it is appropriate to set syntax_errors_to to be the
+same address as the generic errors_to option. The skip_syntax_errors option is
+often used when handling mailing lists.
+
+If all the addresses in a redirection list are skipped because of syntax
+errors, the router declines to handle the original address, and it is passed to
+the following routers.
+
+If skip_syntax_errors is set when an Exim filter is interpreted, any syntax
+error in the filter causes filtering to be abandoned without any action being
+taken. The incident is logged, and the router declines to handle the address,
+so it is passed to the following routers.
+
+Syntax errors in a Sieve filter file cause the "keep" action to occur. This
+action is specified by RFC 3028. The values of skip_syntax_errors, 
+syntax_errors_to, and syntax_errors_text are not used.
+
+skip_syntax_errors can be used to specify that errors in users' forward lists
+or filter files should not prevent delivery. The syntax_errors_to option, used
+with an address that does not get redirected, can be used to notify users of
+these errors, by means of a router like this:
+
+userforward:
+  driver = redirect
+  allow_filter
+  check_local_user
+  file = $home/.forward
+  file_transport = address_file
+  pipe_transport = address_pipe
+  reply_transport = address_reply
+  no_verify
+  skip_syntax_errors
+  syntax_errors_to = real-$local_part@$domain
+  syntax_errors_text = \
+   This is an automatically generated message. An error has\n\
+   been found in your .forward file. Details of the error are\n\
+   reported below. While this error persists, you will receive\n\
+   a copy of this message for every message that is addressed\n\
+   to you. If your .forward file is a filter file, or if it is\n\
+   a non-filter file containing no valid forwarding addresses,\n\
+   a copy of each incoming message will be put in your normal\n\
+   mailbox. If a non-filter file contains at least one valid\n\
+   forwarding address, forwarding to the valid addresses will\n\
+   happen, and those will be the only deliveries that occur.
+
+You also need a router to ensure that local addresses that are prefixed by
+"real-" are recognized, but not forwarded or filtered. For example, you could
+put this immediately before the userforward router:
+
+real_localuser:
+  driver = accept
+  check_local_user
+  local_part_prefix = real-
+  transport = local_delivery
+
+For security, it would probably be a good idea to restrict the use of this
+router to locally-generated messages, using a condition such as this:
+
+  condition = ${if match {$sender_host_address}\
+                         {\N^(|127\.0\.0\.1)$\N}}
+
++-------------------------------------------------------------+
+|syntax_errors_text|Use: redirect|Type: string*|Default: unset|
++-------------------------------------------------------------+
+
+See skip_syntax_errors above.
+
++----------------------------------------------------------+
+|syntax_errors_to|Use: redirect|Type: string|Default: unset|
++----------------------------------------------------------+
+
+See skip_syntax_errors above.
+
+
+
+===============================================================================
+23. ENVIRONMENT FOR RUNNING LOCAL TRANSPORTS
+
+Local transports handle deliveries to files and pipes. (The autoreply transport
+can be thought of as similar to a pipe.) Exim always runs transports in
+subprocesses, under specified uids and gids. Typical deliveries to local
+mailboxes run under the uid and gid of the local user.
+
+Exim also sets a specific current directory while running the transport; for
+some transports a home directory setting is also relevant. The pipe transport
+is the only one that sets up environment variables; see section 29.4 for
+details.
+
+The values used for the uid, gid, and the directories may come from several
+different places. In many cases, the router that handles the address associates
+settings with that address as a result of its check_local_user, group, or user
+options. However, values may also be given in the transport's own
+configuration, and these override anything that comes from the router.
+
+
+23.1 Concurrent deliveries
+--------------------------
+
+If two different messages for the same local recipient arrive more or less
+simultaneously, the two delivery processes are likely to run concurrently. When
+the appendfile transport is used to write to a file, Exim applies locking rules
+to stop concurrent processes from writing to the same file at the same time.
+
+However, when you use a pipe transport, it is up to you to arrange any locking
+that is needed. Here is a silly example:
+
+my_transport:
+  driver = pipe
+  command = /bin/sh -c 'cat >>/some/file'
+
+This is supposed to write the message at the end of the file. However, if two
+messages arrive at the same time, the file will be scrambled. You can use the 
+exim_lock utility program (see section 54.15) to lock a file using the same
+algorithm that Exim itself uses.
+
+
+23.2 Uids and gids
+------------------
+
+All transports have the options group and user. If group is set, it overrides
+any group that the router set in the address, even if user is not set for the
+transport. This makes it possible, for example, to run local mail delivery
+under the uid of the recipient (set by the router), but in a special group (set
+by the transport). For example:
+
+# Routers ...
+# User/group are set by check_local_user in this router
+local_users:
+  driver = accept
+  check_local_user
+  transport = group_delivery
+
+# Transports ...
+# This transport overrides the group
+group_delivery:
+  driver = appendfile
+  file = /var/spool/mail/$local_part_data
+  group = mail
+
+If user is set for a transport, its value overrides what is set in the address
+by the router. If user is non-numeric and group is not set, the gid associated
+with the user is used. If user is numeric, group must be set.
+
+When the uid is taken from the transport's configuration, the initgroups()
+function is called for the groups associated with that uid if the initgroups
+option is set for the transport. When the uid is not specified by the
+transport, but is associated with the address by a router, the option for
+calling initgroups() is taken from the router configuration.
+
+The pipe transport contains the special option pipe_as_creator. If this is set
+and user is not set, the uid of the process that called Exim to receive the
+message is used, and if group is not set, the corresponding original gid is
+also used.
+
+This is the detailed preference order for obtaining a gid; the first of the
+following that is set is used:
+
+  * A group setting of the transport;
+
+  * A group setting of the router;
+
+  * A gid associated with a user setting of the router, either as a result of 
+    check_local_user or an explicit non-numeric user setting;
+
+  * The group associated with a non-numeric user setting of the transport;
+
+  * In a pipe transport, the creator's gid if deliver_as_creator is set and the
+    uid is the creator's uid;
+
+  * The Exim gid if the Exim uid is being used as a default.
+
+If, for example, the user is specified numerically on the router and there are
+no group settings, no gid is available. In this situation, an error occurs.
+This is different for the uid, for which there always is an ultimate default.
+The first of the following that is set is used:
+
+  * A user setting of the transport;
+
+  * In a pipe transport, the creator's uid if deliver_as_creator is set;
+
+  * A user setting of the router;
+
+  * A check_local_user setting of the router;
+
+  * The Exim uid.
+
+Of course, an error will still occur if the uid that is chosen is on the 
+never_users list.
+
+
+23.3 Current and home directories
+---------------------------------
+
+Routers may set current and home directories for local transports by means of
+the transport_current_directory and transport_home_directory options. However,
+if the transport's current_directory or home_directory options are set, they
+override the router's values. In detail, the home directory for a local
+transport is taken from the first of these values that is set:
+
+  * The home_directory option on the transport;
+
+  * The transport_home_directory option on the router;
+
+  * The password data if check_local_user is set on the router;
+
+  * The router_home_directory option on the router.
+
+The current directory is taken from the first of these values that is set:
+
+  * The current_directory option on the transport;
+
+  * The transport_current_directory option on the router.
+
+If neither the router nor the transport sets a current directory, Exim uses the
+value of the home directory, if it is set. Otherwise it sets the current
+directory to / before running a local transport.
+
+
+23.4 Expansion variables derived from the address
+-------------------------------------------------
+
+Normally a local delivery is handling a single address, and in that case the
+variables such as $domain and $local_part are set during local deliveries.
+However, in some circumstances more than one address may be handled at once
+(for example, while writing batch SMTP for onward transmission by some other
+means). In this case, the variables associated with the local part are never
+set, $domain is set only if all the addresses have the same domain, and
+$original_domain is never set.
+
+
+
+===============================================================================
+24. GENERIC OPTIONS FOR TRANSPORTS
+
+The name of a transport is limited to be 64 ASCII characters long; prior to
+Exim 4.95 names would be silently truncated at this length, but now it is
+enforced.
+
+The following generic options apply to all transports:
+
++------------------------------------------------------+
+|body_only|Use: transports|Type: boolean|Default: false|
++------------------------------------------------------+
+
+If this option is set, the message's headers are not transported. It is
+mutually exclusive with headers_only. If it is used with the appendfile or pipe
+transports, the settings of message_prefix and message_suffix should be
+checked, because this option does not automatically suppress them.
+
++--------------------------------------------------------------+
+|current_directory|Use: transports|Type: string*|Default: unset|
++--------------------------------------------------------------+
+
+This specifies the current directory that is to be set while running the
+transport, overriding any value that may have been set by the router. If the
+expansion fails for any reason, including forced failure, an error is logged,
+and delivery is deferred.
+
++------------------------------------------------------------+
+|disable_logging|Use: transports|Type: boolean|Default: false|
++------------------------------------------------------------+
+
+If this option is set true, nothing is logged for any deliveries by the
+transport or for any transport errors. You should not set this option unless
+you really, really know what you are doing.
+
++--------------------------------------------------------+
+|debug_print|Use: transports|Type: string*|Default: unset|
++--------------------------------------------------------+
+
+If this option is set and debugging is enabled (see the -d command line
+option), the string is expanded and included in the debugging output when the
+transport is run. If expansion of the string fails, the error message is
+written to the debugging output, and Exim carries on processing. This facility
+is provided to help with checking out the values of variables and so on when
+debugging driver configurations. For example, if a headers_add option is not
+working properly, debug_print could be used to output the variables it
+references. A newline is added to the text if it does not end with one. The
+variables $transport_name and $router_name contain the name of the transport
+and the router that called it.
+
++--------------------------------------------------------------+
+|delivery_date_add|Use: transports|Type: boolean|Default: false|
++--------------------------------------------------------------+
+
+If this option is true, a Delivery-date: header is added to the message. This
+gives the actual time the delivery was made. As this is not a standard header,
+Exim has a configuration option (delivery_date_remove) which requests its
+removal from incoming messages, so that delivered messages can safely be resent
+to other recipients.
+
++--------------------------------------------------+
+|driver|Use: transports|Type: string|Default: unset|
++--------------------------------------------------+
+
+This specifies which of the available transport drivers is to be used. There is
+no default, and this option must be set for every transport.
+
++------------------------------------------------------------+
+|envelope_to_add|Use: transports|Type: boolean|Default: false|
++------------------------------------------------------------+
+
+If this option is true, an Envelope-to: header is added to the message. This
+gives the original address(es) in the incoming envelope that caused this
+delivery to happen. More than one address may be present if the transport is
+configured to handle several addresses at once, or if more than one original
+address was redirected to the same final address. As this is not a standard
+header, Exim has a configuration option (envelope_to_remove) which requests its
+removal from incoming messages, so that delivered messages can safely be resent
+to other recipients.
+
+Note: If used on a transport handling multiple recipients (the smtp transport
+unless rcpt_max is 1, the appendfile, pipe or lmtp transport if batch_max is
+greater than 1) then information about Bcc recipients will be leaked. Doing so
+is generally not advised.
+
++---------------------------------------------------------+
+|event_action|Use: transports|Type: string*|Default: unset|
++---------------------------------------------------------+
+
+This option declares a string to be expanded for Exim's events mechanism. For
+details see chapter 61.
+
++-------------------------------------------------------+
+|group|Use: transports|Type: string*|Default: Exim group|
++-------------------------------------------------------+
+
+This option specifies a gid for running the transport process, overriding any
+value that the router supplies, and also overriding any value associated with 
+user (see below).
+
++------------------------------------------------------+
+|headers_add|Use: transports|Type: list*|Default: unset|
++------------------------------------------------------+
+
+This option specifies a list of text headers, newline-separated (by default,
+changeable in the usual way 6.21), which are (separately) expanded and added to
+the header portion of a message as it is transported, as described in section
+48.17. Additional header lines can also be specified by routers. If the result
+of the expansion is an empty string, or if the expansion is forced to fail, no
+action is taken. Other expansion failures are treated as errors and cause the
+delivery to be deferred.
+
+Unlike most options, headers_add can be specified multiple times for a
+transport; all listed headers are added.
+
++---------------------------------------------------------+
+|headers_only|Use: transports|Type: boolean|Default: false|
++---------------------------------------------------------+
+
+If this option is set, the message's body is not transported. It is mutually
+exclusive with body_only. If it is used with the appendfile or pipe transports,
+the settings of message_prefix and message_suffix should be checked, since this
+option does not automatically suppress them.
+
++---------------------------------------------------------+
+|headers_remove|Use: transports|Type: list*|Default: unset|
++---------------------------------------------------------+
+
+This option specifies a list of text headers, colon-separated (by default,
+changeable in the usual way 6.21), to be removed from the message. However, the
+option has no effect when an address is just being verified. Each list item is
+separately expanded. If the result of the expansion is an empty string, or if
+the expansion is forced to fail, no action is taken. Other expansion failures
+are treated as errors and cause the delivery to be deferred. If an item ends in
+*, it will match any header with the given prefix.
+
+Matching headers are omitted from the message as it is transported, as
+described in section 48.17. Header removal can also be specified by routers.
+
+Unlike most options, headers_remove can be specified multiple times for a
+transport; all listed headers are removed.
+
+Warning: Because of the separate expansion of the list items, items that
+contain a list separator must have it doubled. To avoid this, change the list
+separator (6.21).
+
++-----------------------------------------------------------+
+|headers_rewrite|Use: transports|Type: string|Default: unset|
++-----------------------------------------------------------+
+
+This option allows addresses in header lines to be rewritten at transport time,
+that is, as the message is being copied to its destination. The contents of the
+option are a colon-separated list of rewriting rules. Each rule is in exactly
+the same form as one of the general rewriting rules that are applied when a
+message is received. These are described in chapter 31. For example,
+
+headers_rewrite = a@b c@d f : \
+                  x@y w@z
+
+changes a@b into c@d in From: header lines, and x@y into w@z in all
+address-bearing header lines. The rules are applied to the header lines just
+before they are written out at transport time, so they affect only those copies
+of the message that pass through the transport. However, only the message's
+original header lines, and any that were added by a system filter, are
+rewritten. If a router or transport adds header lines, they are not affected by
+this option. These rewriting rules are not applied to the envelope. You can
+change the return path using return_path, but you cannot change envelope
+recipients at this time.
+
++-----------------------------------------------------------+
+|home_directory|Use: transports|Type: string*|Default: unset|
++-----------------------------------------------------------+
+
+This option specifies a home directory setting for a local transport,
+overriding any value that may be set by the router. The home directory is
+placed in $home while expanding the transport's private options. It is also
+used as the current directory if no current directory is set by the 
+current_directory option on the transport or the transport_current_directory
+option on the router. If the expansion fails for any reason, including forced
+failure, an error is logged, and delivery is deferred.
+
++-------------------------------------------------------+
+|initgroups|Use: transports|Type: boolean|Default: false|
++-------------------------------------------------------+
+
+If this option is true and the uid for the delivery process is provided by the
+transport, the initgroups() function is called when running the transport to
+ensure that any additional groups associated with the uid are set up.
+
++----------------------------------------------------------+
+|max_parallel|Use: transports|Type: integer*|Default: unset|
++----------------------------------------------------------+
+
+If this option is set and expands to an integer greater than zero it limits the
+number of concurrent runs of the transport. The control does not apply to
+shadow transports.
+
+Exim implements this control by means of a hints database in which a record is
+incremented whenever a transport process is being created. The record is
+decremented and possibly removed when the process terminates. Obviously there
+is scope for records to get left lying around if there is a system or program
+crash. To guard against this, Exim ignores any records that are more than six
+hours old.
+
+If you use this option, you should also arrange to delete the relevant hints
+database whenever your system reboots. The names of the files start with misc
+and they are kept in the spool/db directory. There may be one or two files,
+depending on the type of DBM in use. The same files are used for ETRN and smtp
+transport serialization.
+
++-----------------------------------------------------------+
+|message_size_limit|Use: transports|Type: string*|Default: 0|
++-----------------------------------------------------------+
+
+This option controls the size of messages passed through the transport. It is
+expanded before use; the result of the expansion must be a sequence of decimal
+digits, optionally followed by K or M. If the expansion fails for any reason,
+including forced failure, or if the result is not of the required form,
+delivery is deferred. If the value is greater than zero and the size of a
+message exceeds this limit, the address is failed. If there is any chance that
+the resulting bounce message could be routed to the same transport, you should
+ensure that return_size_limit is less than the transport's message_size_limit,
+as otherwise the bounce message will fail to get delivered.
+
++-----------------------------------------------------------------+
+|rcpt_include_affixes|Use: transports|Type: boolean|Default: false|
++-----------------------------------------------------------------+
+
+When this option is false (the default), and an address that has had any
+affixes (prefixes or suffixes) removed from the local part is delivered by any
+form of SMTP or LMTP, the affixes are not included. For example, if a router
+that contains
+
+local_part_prefix = *-
+
+routes the address abc-xyz@some.domain to an SMTP transport, the envelope is
+delivered with
+
+RCPT TO:<xyz@some.domain>
+
+This is also the case when an ACL-time callout is being used to verify a
+recipient address. However, if rcpt_include_affixes is set true, the whole
+local part is included in the RCPT command. This option applies to BSMTP
+deliveries by the appendfile and pipe transports as well as to the lmtp and 
+smtp transports.
+
++---------------------------------------------------------------------+
+|retry_use_local_part|Use: transports|Type: boolean|Default: see below|
++---------------------------------------------------------------------+
+
+When a delivery suffers a temporary failure, a retry record is created in
+Exim's hints database. For remote deliveries, the key for the retry record is
+based on the name and/or IP address of the failing remote host. For local
+deliveries, the key is normally the entire address, including both the local
+part and the domain. This is suitable for most common cases of local delivery
+temporary failure - for example, exceeding a mailbox quota should delay only
+deliveries to that mailbox, not to the whole domain.
+
+However, in some special cases you may want to treat a temporary local delivery
+as a failure associated with the domain, and not with a particular local part.
+(For example, if you are storing all mail for some domain in files.) You can do
+this by setting retry_use_local_part false.
+
+For all the local transports, its default value is true. For remote transports,
+the default value is false for tidiness, but changing the value has no effect
+on a remote transport in the current implementation.
+
++--------------------------------------------------------+
+|return_path|Use: transports|Type: string*|Default: unset|
++--------------------------------------------------------+
+
+If this option is set, the string is expanded at transport time and replaces
+the existing return path (envelope sender) value in the copy of the message
+that is being delivered. An empty return path is permitted. This feature is
+designed for remote deliveries, where the value of this option is used in the
+SMTP MAIL command. If you set return_path for a local transport, the only
+effect is to change the address that is placed in the Return-path: header line,
+if one is added to the message (see the next option).
+
+Note: A changed return path is not logged unless you add 
+return_path_on_delivery to the log selector.
+
+The expansion can refer to the existing value via $return_path. This is either
+the message's envelope sender, or an address set by the errors_to option on a
+router. If the expansion is forced to fail, no replacement occurs; if it fails
+for another reason, delivery is deferred. This option can be used to support
+VERP (Variable Envelope Return Paths) - see section 51.6.
+
+Note: If a delivery error is detected locally, including the case when a remote
+server rejects a message at SMTP time, the bounce message is not sent to the
+value of this option. It is sent to the previously set errors address. This
+defaults to the incoming sender address, but can be changed by setting 
+errors_to in a router.
+
++------------------------------------------------------------+
+|return_path_add|Use: transports|Type: boolean|Default: false|
++------------------------------------------------------------+
+
+If this option is true, a Return-path: header is added to the message. Although
+the return path is normally available in the prefix line of BSD mailboxes, this
+is commonly not displayed by MUAs, and so the user does not have easy access to
+it.
+
+RFC 2821 states that the Return-path: header is added to a message "when the
+delivery SMTP server makes the final delivery". This implies that this header
+should not be present in incoming messages. Exim has a configuration option, 
+return_path_remove, which requests removal of this header from incoming
+messages, so that delivered messages can safely be resent to other recipients.
+
++-------------------------------------------------------------+
+|shadow_condition|Use: transports|Type: string*|Default: unset|
++-------------------------------------------------------------+
+
+See shadow_transport below.
+
++------------------------------------------------------------+
+|shadow_transport|Use: transports|Type: string|Default: unset|
++------------------------------------------------------------+
+
+A local transport may set the shadow_transport option to the name of another
+local transport. Shadow remote transports are not supported.
+
+Whenever a delivery to the main transport succeeds, and either shadow_condition
+is unset, or its expansion does not result in the empty string or one of the
+strings "0" or "no" or "false", the message is also passed to the shadow
+transport, with the same delivery address or addresses. If expansion fails, no
+action is taken except that non-forced expansion failures cause a log line to
+be written.
+
+The result of the shadow transport is discarded and does not affect the
+subsequent processing of the message. Only a single level of shadowing is
+provided; the shadow_transport option is ignored on any transport when it is
+running as a shadow. Options concerned with output from pipes are also ignored.
+The log line for the successful delivery has an item added on the end, of the
+form
+
+ST=<shadow transport name>
+
+If the shadow transport did not succeed, the error message is put in
+parentheses afterwards. Shadow transports can be used for a number of different
+purposes, including keeping more detailed log information than Exim normally
+provides, and implementing automatic acknowledgment policies based on message
+headers that some sites insist on.
+
++-------------------------------------------------------------+
+|transport_filter|Use: transports|Type: string*|Default: unset|
++-------------------------------------------------------------+
+
+This option sets up a filtering (in the Unix shell sense) process for messages
+at transport time. It should not be confused with mail filtering as set up by
+individual users or via a system filter. If unset, or expanding to an empty
+string, no filtering is done.
+
+When the message is about to be written out, the command specified by 
+transport_filter is started up in a separate, parallel process, and the entire
+message, including the header lines, is passed to it on its standard input
+(this in fact is done from a third process, to avoid deadlock). The command
+must be specified as an absolute path.
+
+The lines of the message that are written to the transport filter are
+terminated by newline ("\n"). The message is passed to the filter before any
+SMTP-specific processing, such as turning "\n" into "\r\n" and escaping lines
+beginning with a dot, and also before any processing implied by the settings of
+check_string and escape_string in the appendfile or pipe transports.
+
+The standard error for the filter process is set to the same destination as its
+standard output; this is read and written to the message's ultimate
+destination. The process that writes the message to the filter, the filter
+itself, and the original process that reads the result and delivers it are all
+run in parallel, like a shell pipeline.
+
+The filter can perform any transformations it likes, but of course should take
+care not to break RFC 2822 syntax. Exim does not check the result, except to
+test for a final newline when SMTP is in use. All messages transmitted over
+SMTP must end with a newline, so Exim supplies one if it is missing.
+
+A transport filter can be used to provide content-scanning on a per-user basis
+at delivery time if the only required effect of the scan is to modify the
+message. For example, a content scan could insert a new header line containing
+a spam score. This could be interpreted by a filter in the user's MUA. It is
+not possible to discard a message at this stage.
+
+A problem might arise if the filter increases the size of a message that is
+being sent down an SMTP connection. If the receiving SMTP server has indicated
+support for the SIZE parameter, Exim will have sent the size of the message at
+the start of the SMTP session. If what is actually sent is substantially more,
+the server might reject the message. This can be worked round by setting the 
+size_addition option on the smtp transport, either to allow for additions to
+the message, or to disable the use of SIZE altogether.
+
+The value of the transport_filter option is the command string for starting the
+filter, which is run directly from Exim, not under a shell. The string is
+parsed by Exim in the same way as a command string for the pipe transport: Exim
+breaks it up into arguments and then expands each argument separately (see
+section 29.3). Any kind of expansion failure causes delivery to be deferred.
+The special argument $pipe_addresses is replaced by a number of arguments, one
+for each address that applies to this delivery. (This isn't an ideal name for
+this feature here, but as it was already implemented for the pipe transport, it
+seemed sensible not to change it.)
+
+The expansion variables $host and $host_address are available when the
+transport is a remote one. They contain the name and IP address of the host to
+which the message is being sent. For example:
+
+transport_filter = /some/directory/transport-filter.pl \
+  $host $host_address $pipe_addresses
+
+Two problems arise if you want to use more complicated expansion items to
+generate transport filter commands, both of which due to the fact that the
+command is split up before expansion.
+
+  * If an expansion item contains white space, you must quote it, so that it is
+    all part of the same command item. If the entire option setting is one such
+    expansion item, you have to take care what kind of quoting you use. For
+    example:
+
+    transport_filter = '/bin/cmd${if eq{$host}{a.b.c}{1}{2}}'
+
+    This runs the command /bin/cmd1 if the host name is a.b.c, and /bin/cmd2
+    otherwise. If double quotes had been used, they would have been stripped by
+    Exim when it read the option's value. When the value is used, if the single
+    quotes were missing, the line would be split into two items, "/bin/cmd${if"
+    and "eq{$host}{a.b.c}{1}{2}", and an error would occur when Exim tried to
+    expand the first one.
+
+  * Except for the special case of $pipe_addresses that is mentioned above, an
+    expansion cannot generate multiple arguments, or a command name followed by
+    arguments. Consider this example:
+
+    transport_filter = ${lookup{$host}lsearch{/a/file}\
+                        {$value}{/bin/cat}}
+
+    The result of the lookup is interpreted as the name of the command, even if
+    it contains white space. The simplest way round this is to use a shell:
+
+    transport_filter = /bin/sh -c ${lookup{$host}lsearch{/a/file}\
+                                   {$value}{/bin/cat}}
+
+The filter process is run under the same uid and gid as the normal delivery.
+For remote deliveries this is the Exim uid/gid by default. The command should
+normally yield a zero return code. Transport filters are not supposed to fail.
+A non-zero code is taken to mean that the transport filter encountered some
+serious problem. Delivery of the message is deferred; the message remains on
+the queue and is tried again later. It is not possible to cause a message to be
+bounced from a transport filter.
+
+If a transport filter is set on an autoreply transport, the original message is
+passed through the filter as it is being copied into the newly generated
+message, which happens if the return_message option is set.
+
++---------------------------------------------------------------+
+|transport_filter_timeout|Use: transports|Type: time|Default: 5m|
++---------------------------------------------------------------+
+
+When Exim is reading the output of a transport filter, it applies a timeout
+that can be set by this option. Exceeding the timeout is normally treated as a
+temporary delivery failure. However, if a transport filter is used with a pipe
+transport, a timeout in the transport filter is treated in the same way as a
+timeout in the pipe command itself. By default, a timeout is a hard error, but
+if the pipe transport's timeout_defer option is set true, it becomes a
+temporary error.
+
++-----------------------------------------------------+
+|user|Use: transports|Type: string*|Default: Exim user|
++-----------------------------------------------------+
+
+This option specifies the user under whose uid the delivery process is to be
+run, overriding any uid that may have been set by the router. If the user is
+given as a name, the uid is looked up from the password data, and the
+associated group is taken as the value of the gid to be used if the group
+option is not set.
+
+For deliveries that use local transports, a user and group are normally
+specified explicitly or implicitly (for example, as a result of 
+check_local_user) by the router or transport.
+
+For remote transports, you should leave this option unset unless you really are
+sure you know what you are doing. When a remote transport is running, it needs
+to be able to access Exim's hints databases, because each host may have its own
+retry data.
+
+
+
+===============================================================================
+25. ADDRESS BATCHING IN LOCAL TRANSPORTS
+
+The only remote transport (smtp) is normally configured to handle more than one
+address at a time, so that when several addresses are routed to the same remote
+host, just one copy of the message is sent. Local transports, however, normally
+handle one address at a time. That is, a separate instance of the transport is
+run for each address that is routed to the transport. A separate copy of the
+message is delivered each time.
+
+In special cases, it may be desirable to handle several addresses at once in a
+local transport, for example:
+
+  * In an appendfile transport, when storing messages in files for later
+    delivery by some other means, a single copy of the message with multiple
+    recipients saves space.
+
+  * In an lmtp transport, when delivering over "local SMTP" to some process, a
+    single copy saves time, and is the normal way LMTP is expected to work.
+
+  * In a pipe transport, when passing the message to a scanner program or to
+    some other delivery mechanism such as UUCP, multiple recipients may be
+    acceptable.
+
+These three local transports all have the same options for controlling multiple
+("batched") deliveries, namely batch_max and batch_id. To save repeating the
+information for each transport, these options are described here.
+
+The batch_max option specifies the maximum number of addresses that can be
+delivered together in a single run of the transport. Its default value is one
+(no batching). When more than one address is routed to a transport that has a 
+batch_max value greater than one, the addresses are delivered in a batch (that
+is, in a single run of the transport with multiple recipients), subject to
+certain conditions:
+
+  * If any of the transport's options contain a reference to $local_part, no
+    batching is possible.
+
+  * If any of the transport's options contain a reference to $domain, only
+    addresses with the same domain are batched.
+
+  * If batch_id is set, it is expanded for each address, and only those
+    addresses with the same expanded value are batched. This allows you to
+    specify customized batching conditions. Failure of the expansion for any
+    reason, including forced failure, disables batching, but it does not stop
+    the delivery from taking place.
+
+  * Batched addresses must also have the same errors address (where to send
+    delivery errors), the same header additions and removals, the same user and
+    group for the transport, and if a host list is present, the first host must
+    be the same.
+
+In the case of the appendfile and pipe transports, batching applies both when
+the file or pipe command is specified in the transport, and when it is
+specified by a redirect router, but all the batched addresses must of course be
+routed to the same file or pipe command. These two transports have an option
+called use_bsmtp, which causes them to deliver the message in "batched SMTP"
+format, with the envelope represented as SMTP commands. The check_string and 
+escape_string options are forced to the values
+
+check_string = "."
+escape_string = ".."
+
+when batched SMTP is in use. A full description of the batch SMTP mechanism is
+given in section 49.10. The lmtp transport does not have a use_bsmtp option,
+because it always delivers using the SMTP protocol.
+
+If the generic envelope_to_add option is set for a batching transport, the 
+Envelope-to: header that is added to the message contains all the addresses
+that are being processed together. If you are using a batching appendfile
+transport without use_bsmtp, the only way to preserve the recipient addresses
+is to set the envelope_to_add option.
+
+If you are using a pipe transport without BSMTP, and setting the transport's 
+command option, you can include $pipe_addresses as part of the command. This is
+not a true variable; it is a bit of magic that causes each of the recipient
+addresses to be inserted into the command as a separate argument. This provides
+a way of accessing all the addresses that are being delivered in the batch. 
+Note: This is not possible for pipe commands that are specified by a redirect
+router.
+
+
+
+===============================================================================
+26. THE APPENDFILE TRANSPORT
+
+The appendfile transport delivers a message by appending it to an existing
+file, or by creating an entirely new file in a specified directory. Single
+files to which messages are appended can be in the traditional Unix mailbox
+format, or optionally in the MBX format supported by the Pine MUA and
+University of Washington IMAP daemon, inter alia. When each message is being
+delivered as a separate file, "maildir" format can optionally be used to give
+added protection against failures that happen part-way through the delivery. A
+third form of separate-file delivery known as "mailstore" is also supported.
+For all file formats, Exim attempts to create as many levels of directory as
+necessary, provided that create_directory is set.
+
+The code for the optional formats is not included in the Exim binary by
+default. It is necessary to set SUPPORT_MBX, SUPPORT_MAILDIR and/or
+SUPPORT_MAILSTORE in Local/Makefile to have the appropriate code included.
+
+Exim recognizes system quota errors, and generates an appropriate message. Exim
+also supports its own quota control within the transport, for use when the
+system facility is unavailable or cannot be used for some reason.
+
+If there is an error while appending to a file (for example, quota exceeded or
+partition filled), Exim attempts to reset the file's length and last
+modification time back to what they were before. If there is an error while
+creating an entirely new file, the new file is removed.
+
+Before appending to a file, a number of security checks are made, and the file
+is locked. A detailed description is given below, after the list of private
+options.
+
+The appendfile transport is most commonly used for local deliveries to users'
+mailboxes. However, it can also be used as a pseudo-remote transport for
+putting messages into files for remote delivery by some means other than Exim.
+"Batch SMTP" format is often used in this case (see the use_bsmtp option).
+
+
+26.1 The file and directory options
+-----------------------------------
+
+The file option specifies a single file, to which the message is appended; the 
+directory option specifies a directory, in which a new file containing the
+message is created. Only one of these two options can be set, and for normal
+deliveries to mailboxes, one of them must be set.
+
+However, appendfile is also used for delivering messages to files or
+directories whose names (or parts of names) are obtained from alias,
+forwarding, or filtering operations (for example, a save command in a user's
+Exim filter). When such a transport is running, $local_part contains the local
+part that was aliased or forwarded, and $address_file contains the name (or
+partial name) of the file or directory generated by the redirection operation.
+There are two cases:
+
+  * If neither file nor directory is set, the redirection operation must
+    specify an absolute path (one that begins with "/"). This is the most
+    common case when users with local accounts use filtering to sort mail into
+    different folders. See for example, the address_file transport in the
+    default configuration. If the path ends with a slash, it is assumed to be
+    the name of a directory. A delivery to a directory can also be forced by
+    setting maildir_format or mailstore_format.
+
+  * If file or directory is set for a delivery from a redirection, it is used
+    to determine the file or directory name for the delivery. Normally, the
+    contents of $address_file are used in some way in the string expansion.
+
+If the create_file option is set to a path which matches (see the option
+definition below for details) a file or directory name for the delivery, that
+name becomes de-tainted.
+
+Tainted data may not be used for a file or directory name. This means that, for
+instance, $local_part cannot be used directly as a component of a path. It can
+however be used as the key for a lookup which returns a path (or component).
+
+As an example of the second case, consider an environment where users do not
+have home directories. They may be permitted to use Exim filter commands of the
+form:
+
+save folder23
+
+or Sieve filter commands of the form:
+
+require "fileinto";
+fileinto "folder23";
+
+In this situation, the expansion of file or directory in the transport must
+transform the relative path into an appropriate absolute filename. In the case
+of Sieve filters, the name inbox must be handled. It is the name that is used
+as a result of a "keep" action in the filter. This example shows one way of
+handling this requirement:
+
+file = ${if eq{$address_file}{inbox} \
+            {/var/mail/$local_part_data} \
+            {${if eq{${substr_0_1:$address_file}}{/} \
+                  {$address_file} \
+                  {$home/mail/$address_file} \
+            }} \
+       }
+
+With this setting of file, inbox refers to the standard mailbox location,
+absolute paths are used without change, and other folders are in the mail
+directory within the home directory.
+
+Note 1: While processing an Exim filter, a relative path such as folder23 is
+turned into an absolute path if a home directory is known to the router. In
+particular, this is the case if check_local_user is set. If you want to prevent
+this happening at routing time, you can set router_home_directory empty. This
+forces the router to pass the relative path to the transport.
+
+Note 2: An absolute path in $address_file is not treated specially; the file or
+directory option is still used if it is set.
+
+
+26.2 Private options for appendfile
+-----------------------------------
+
++-------------------------------------------------------+
+|allow_fifo|Use: appendfile|Type: boolean|Default: false|
++-------------------------------------------------------+
+
+Setting this option permits delivery to named pipes (FIFOs) as well as to
+regular files. If no process is reading the named pipe at delivery time, the
+delivery is deferred.
+
++----------------------------------------------------------+
+|allow_symlink|Use: appendfile|Type: boolean|Default: false|
++----------------------------------------------------------+
+
+By default, appendfile will not deliver if the path name for the file is that
+of a symbolic link. Setting this option relaxes that constraint, but there are
+security issues involved in the use of symbolic links. Be sure you know what
+you are doing if you set this. Details of exactly what this option affects are
+included in the discussion which follows this list of options.
+
++-----------------------------------------------------+
+|batch_id|Use: appendfile|Type: string*|Default: unset|
++-----------------------------------------------------+
+
+See the description of local delivery batching in chapter 25. However, batching
+is automatically disabled for appendfile deliveries that happen as a result of
+forwarding or aliasing or other redirection directly to a file.
+
++--------------------------------------------------+
+|batch_max|Use: appendfile|Type: integer|Default: 1|
++--------------------------------------------------+
+
+See the description of local delivery batching in chapter 25.
+
++--------------------------------------------------------+
+|check_group|Use: appendfile|Type: boolean|Default: false|
++--------------------------------------------------------+
+
+When this option is set, the group owner of the file defined by the file option
+is checked to see that it is the same as the group under which the delivery
+process is running. The default setting is false because the default file mode
+is 0600, which means that the group is irrelevant.
+
++-------------------------------------------------------+
+|check_owner|Use: appendfile|Type: boolean|Default: true|
++-------------------------------------------------------+
+
+When this option is set, the owner of the file defined by the file option is
+checked to ensure that it is the same as the user under which the delivery
+process is running.
+
++------------------------------------------------------------+
+|check_string|Use: appendfile|Type: string|Default: see below|
++------------------------------------------------------------+
+
+As appendfile writes the message, the start of each line is tested for matching
+check_string, and if it does, the initial matching characters are replaced by
+the contents of escape_string. The value of check_string is a literal string,
+not a regular expression, and the case of any letters it contains is
+significant.
+
+If use_bsmtp is set the values of check_string and escape_string are forced to
+"." and ".." respectively, and any settings in the configuration are ignored.
+Otherwise, they default to "From " and ">From " when the file option is set,
+and unset when any of the directory, maildir, or mailstore options are set.
+
+The default settings, along with message_prefix and message_suffix, are
+suitable for traditional "BSD" mailboxes, where a line beginning with "From "
+indicates the start of a new message. All four options need changing if another
+format is used. For example, to deliver to mailboxes in MMDF format:
+
+check_string = "\1\1\1\1\n"
+escape_string = "\1\1\1\1 \n"
+message_prefix = "\1\1\1\1\n"
+message_suffix = "\1\1\1\1\n"
+
++------------------------------------------------------------+
+|create_directory|Use: appendfile|Type: boolean|Default: true|
++------------------------------------------------------------+
+
+When this option is true, Exim attempts to create any missing superior
+directories for the file that it is about to write. A created directory's mode
+is given by the directory_mode option.
+
+The group ownership of a newly created directory is highly dependent on the
+operating system (and possibly the file system) that is being used. For
+example, in Solaris, if the parent directory has the setgid bit set, its group
+is propagated to the child; if not, the currently set group is used. However,
+in FreeBSD, the parent's group is always used.
+
++----------------------------------------------------------+
+|create_file|Use: appendfile|Type: string|Default: anywhere|
++----------------------------------------------------------+
+
+This option constrains the location of files and directories that are created
+by this transport. It applies to files defined by the file option and
+directories defined by the directory option. In the case of maildir delivery,
+it applies to the top level directory, not the maildir directories beneath.
+
+The option must be set to one of the words "anywhere", "inhome", or
+"belowhome", or to an absolute path.
+
+In the second and third cases, a home directory must have been set for the
+transport, and the file or directory being created must reside within it. The
+"belowhome" checking additionally checks for attempts to use "../" to evade the
+testing. This option is not useful when an explicit filename is given for
+normal mailbox deliveries. It is intended for the case when filenames are
+generated from users' .forward files. These are usually handled by an 
+appendfile transport called address_file. See also file_must_exist.
+
+In the fourth case, the value given for this option must be an absolute path
+for an existing directory. The value is used for checking instead of a home
+directory; checking is done in "belowhome" mode.
+
+If "belowhome" checking is used, the file or directory path becomes de-tainted.
+
++------------------------------------------------------+
+|directory|Use: appendfile|Type: string*|Default: unset|
++------------------------------------------------------+
+
+This option is mutually exclusive with the file option, but one of file or 
+directory must be set, unless the delivery is the direct result of a
+redirection (see section 26.1).
+
+When directory is set, the string is expanded, and the message is delivered
+into a new file or files in or below the given directory, instead of being
+appended to a single mailbox file. A number of different formats are provided
+(see maildir_format and mailstore_format), and see section 26.4 for further
+details of this form of delivery.
+
+The result of expansion must not be tainted, unless the create_file option
+specifies a path.
+
++---------------------------------------------------------------+
+|directory_file|Use: appendfile|Type: string*|Default: see below|
++---------------------------------------------------------------+
+
+When directory is set, but neither maildir_format nor mailstore_format is set, 
+appendfile delivers each message into a file whose name is obtained by
+expanding this string. The default value is:
+
+q${base62:$tod_epoch}-$inode
+
+This generates a unique name from the current time, in base 62 form, and the
+inode of the file. The variable $inode is available only when expanding this
+option.
+
++----------------------------------------------------------------+
+|directory_mode|Use: appendfile|Type: octal integer|Default: 0700|
++----------------------------------------------------------------+
+
+If appendfile creates any directories as a result of the create_directory
+option, their mode is specified by this option.
+
++-------------------------------------------------------------------+
+|escape_string|Use: appendfile|Type: string|Default: see description|
++-------------------------------------------------------------------+
+
+See check_string above.
+
++-------------------------------------------------+
+|file|Use: appendfile|Type: string*|Default: unset|
++-------------------------------------------------+
+
+This option is mutually exclusive with the directory option, but one of file or
+directory must be set, unless the delivery is the direct result of a
+redirection (see section 26.1). The file option specifies a single file, to
+which the message is appended. One or more of use_fcntl_lock, use_flock_lock,
+or use_lockfile must be set with file.
+
+The result of expansion must not be tainted, unless the create_file option
+specifies a path.
+
+If you are using more than one host to deliver over NFS into the same
+mailboxes, you should always use lock files.
+
+The string value is expanded for each delivery, and must yield an absolute
+path. The most common settings of this option are variations on one of these
+examples:
+
+file = /var/spool/mail/$local_part_data
+file = /home/$local_part_data/inbox
+file = $home/inbox
+
+In the first example, all deliveries are done into the same directory. If Exim
+is configured to use lock files (see use_lockfile below) it must be able to
+create a file in the directory, so the "sticky" bit must be turned on for
+deliveries to be possible, or alternatively the group option can be used to run
+the delivery under a group id which has write access to the directory.
+
++-------------------------------------------------------+
+|file_format|Use: appendfile|Type: string|Default: unset|
++-------------------------------------------------------+
+
+This option requests the transport to check the format of an existing file
+before adding to it. The check consists of matching a specific string at the
+start of the file. The value of the option consists of an even number of
+colon-separated strings. The first of each pair is the test string, and the
+second is the name of a transport. If the transport associated with a matched
+string is not the current transport, control is passed over to the other
+transport. For example, suppose the standard local_delivery transport has this
+added to it:
+
+file_format = "From       : local_delivery :\
+               \1\1\1\1\n : local_mmdf_delivery"
+
+Mailboxes that begin with "From" are still handled by this transport, but if a
+mailbox begins with four binary ones followed by a newline, control is passed
+to a transport called local_mmdf_delivery, which presumably is configured to do
+the delivery in MMDF format. If a mailbox does not exist or is empty, it is
+assumed to match the current transport. If the start of a mailbox doesn't match
+any string, or if the transport named for a given string is not defined,
+delivery is deferred.
+
++------------------------------------------------------------+
+|file_must_exist|Use: appendfile|Type: boolean|Default: false|
++------------------------------------------------------------+
+
+If this option is true, the file specified by the file option must exist. A
+temporary error occurs if it does not, causing delivery to be deferred. If this
+option is false, the file is created if it does not exist.
+
++---------------------------------------------------------+
+|lock_fcntl_timeout|Use: appendfile|Type: time|Default: 0s|
++---------------------------------------------------------+
+
+By default, the appendfile transport uses non-blocking calls to fcntl() when
+locking an open mailbox file. If the call fails, the delivery process sleeps
+for lock_interval and tries again, up to lock_retries times. Non-blocking calls
+are used so that the file is not kept open during the wait for the lock; the
+reason for this is to make it as safe as possible for deliveries over NFS in
+the case when processes might be accessing an NFS mailbox without using a lock
+file. This should not be done, but misunderstandings and hence
+misconfigurations are not unknown.
+
+On a busy system, however, the performance of a non-blocking lock approach is
+not as good as using a blocking lock with a timeout. In this case, the waiting
+is done inside the system call, and Exim's delivery process acquires the lock
+and can proceed as soon as the previous lock holder releases it.
+
+If lock_fcntl_timeout is set to a non-zero time, blocking locks, with that
+timeout, are used. There may still be some retrying: the maximum number of
+retries is
+
+(lock_retries * lock_interval) / lock_fcntl_timeout
+
+rounded up to the next whole number. In other words, the total time during
+which appendfile is trying to get a lock is roughly the same, unless 
+lock_fcntl_timeout is set very large.
+
+You should consider setting this option if you are getting a lot of delayed
+local deliveries because of errors of the form
+
+failed to lock mailbox /some/file (fcntl)
+
++---------------------------------------------------------+
+|lock_flock_timeout|Use: appendfile|Type: time|Default: 0s|
++---------------------------------------------------------+
+
+This timeout applies to file locking when using flock() (see use_flock); the
+timeout operates in a similar manner to lock_fcntl_timeout.
+
++----------------------------------------------------+
+|lock_interval|Use: appendfile|Type: time|Default: 3s|
++----------------------------------------------------+
+
+This specifies the time to wait between attempts to lock the file. See below
+for details of locking.
+
++------------------------------------------------------+
+|lock_retries|Use: appendfile|Type: integer|Default: 10|
++------------------------------------------------------+
+
+This specifies the maximum number of attempts to lock the file. A value of zero
+is treated as 1. See below for details of locking.
+
++---------------------------------------------------------------+
+|lockfile_mode|Use: appendfile|Type: octal integer|Default: 0600|
++---------------------------------------------------------------+
+
+This specifies the mode of the created lock file, when a lock file is being
+used (see use_lockfile and use_mbx_lock).
+
++--------------------------------------------------------+
+|lockfile_timeout|Use: appendfile|Type: time|Default: 30m|
++--------------------------------------------------------+
+
+When a lock file is being used (see use_lockfile), if a lock file already
+exists and is older than this value, it is assumed to have been left behind by
+accident, and Exim attempts to remove it.
+
++--------------------------------------------------------------+
+|mailbox_filecount|Use: appendfile|Type: string*|Default: unset|
++--------------------------------------------------------------+
+
+If this option is set, it is expanded, and the result is taken as the current
+number of files in the mailbox. It must be a decimal number, optionally
+followed by K or M. This provides a way of obtaining this information from an
+external source that maintains the data.
+
++---------------------------------------------------------+
+|mailbox_size|Use: appendfile|Type: string*|Default: unset|
++---------------------------------------------------------+
+
+If this option is set, it is expanded, and the result is taken as the current
+size the mailbox. It must be a decimal number, optionally followed by K or M.
+This provides a way of obtaining this information from an external source that
+maintains the data. This is likely to be helpful for maildir deliveries where
+it is computationally expensive to compute the size of a mailbox.
+
++-----------------------------------------------------------+
+|maildir_format|Use: appendfile|Type: boolean|Default: false|
++-----------------------------------------------------------+
+
+If this option is set with the directory option, the delivery is into a new
+file, in the "maildir" format that is used by other mail software. When the
+transport is activated directly from a redirect router (for example, the 
+address_file transport in the default configuration), setting maildir_format
+causes the path received from the router to be treated as a directory, whether
+or not it ends with "/". This option is available only if SUPPORT_MAILDIR is
+present in Local/Makefile. See section 26.5 below for further details.
+
++-----------------------------------------------------------------------------+
+|maildir_quota_directory_regex|Use: appendfile|Type: string|Default: See below|
++-----------------------------------------------------------------------------+
+
+This option is relevant only when maildir_use_size_file is set. It defines a
+regular expression for specifying directories, relative to the quota directory
+(see quota_directory), that should be included in the quota calculation. The
+default value is:
+
+maildir_quota_directory_regex = ^(?:cur|new|\..*)$
+
+This includes the cur and new directories, and any maildir++ folders
+(directories whose names begin with a dot). If you want to exclude the Trash
+folder from the count (as some sites do), you need to change this setting to
+
+maildir_quota_directory_regex = ^(?:cur|new|\.(?!Trash).*)$
+
+This uses a negative lookahead in the regular expression to exclude the
+directory whose name is .Trash. When a directory is excluded from quota
+calculations, quota processing is bypassed for any messages that are delivered
+directly into that directory.
+
++---------------------------------------------------------+
+|maildir_retries|Use: appendfile|Type: integer|Default: 10|
++---------------------------------------------------------+
+
+This option specifies the number of times to retry when writing a file in
+"maildir" format. See section 26.5 below.
+
++--------------------------------------------------------+
+|maildir_tag|Use: appendfile|Type: string*|Default: unset|
++--------------------------------------------------------+
+
+This option applies only to deliveries in maildir format, and is described in
+section 26.5 below.
+
++-------------------------------------------------------------------+
+|maildir_use_size_file|Use: appendfile*|Type: boolean|Default: false|
++-------------------------------------------------------------------+
+
+The result of string expansion for this option must be a valid boolean value.
+If it is true, it enables support for maildirsize files. Exim creates a
+maildirsize file in a maildir if one does not exist, taking the quota from the 
+quota option of the transport. If quota is unset, the value is zero. See 
+maildir_quota_directory_regex above and section 26.5 below for further details.
+
++----------------------------------------------------------------------+
+|maildirfolder_create_regex|Use: appendfile|Type: string|Default: unset|
++----------------------------------------------------------------------+
+
+The value of this option is a regular expression. If it is unset, it has no
+effect. Otherwise, before a maildir delivery takes place, the pattern is
+matched against the name of the maildir directory, that is, the directory
+containing the new and tmp subdirectories that will be used for the delivery.
+If there is a match, Exim checks for the existence of a file called
+maildirfolder in the directory, and creates it if it does not exist. See
+section 26.5 for more details.
+
++-------------------------------------------------------------+
+|mailstore_format|Use: appendfile|Type: boolean|Default: false|
++-------------------------------------------------------------+
+
+If this option is set with the directory option, the delivery is into two new
+files in "mailstore" format. The option is available only if SUPPORT_MAILSTORE
+is present in Local/Makefile. See section 26.4 below for further details.
+
++-------------------------------------------------------------+
+|mailstore_prefix|Use: appendfile|Type: string*|Default: unset|
++-------------------------------------------------------------+
+
+This option applies only to deliveries in mailstore format, and is described in
+section 26.4 below.
+
++-------------------------------------------------------------+
+|mailstore_suffix|Use: appendfile|Type: string*|Default: unset|
++-------------------------------------------------------------+
+
+This option applies only to deliveries in mailstore format, and is described in
+section 26.4 below.
+
++-------------------------------------------------------+
+|mbx_format|Use: appendfile|Type: boolean|Default: false|
++-------------------------------------------------------+
+
+This option is available only if Exim has been compiled with SUPPORT_MBX set in
+Local/Makefile. If mbx_format is set with the file option, the message is
+appended to the mailbox file in MBX format instead of traditional Unix format.
+This format is supported by Pine4 and its associated IMAP and POP daemons, by
+means of the c-client library that they all use.
+
+Note: The message_prefix and message_suffix options are not automatically
+changed by the use of mbx_format. They should normally be set empty when using
+MBX format, so this option almost always appears in this combination:
+
+mbx_format = true
+message_prefix =
+message_suffix =
+
+If none of the locking options are mentioned in the configuration, use_mbx_lock
+is assumed and the other locking options default to false. It is possible to
+specify the other kinds of locking with mbx_format, but use_fcntl_lock and 
+use_mbx_lock are mutually exclusive. MBX locking interworks with c-client,
+providing for shared access to the mailbox. It should not be used if any
+program that does not use this form of locking is going to access the mailbox,
+nor should it be used if the mailbox file is NFS mounted, because it works only
+when the mailbox is accessed from a single host.
+
+If you set use_fcntl_lock with an MBX-format mailbox, you cannot use the
+standard version of c-client, because as long as it has a mailbox open (this
+means for the whole of a Pine or IMAP session), Exim will not be able to append
+messages to it.
+
++---------------------------------------------------------------+
+|message_prefix|Use: appendfile|Type: string*|Default: see below|
++---------------------------------------------------------------+
+
+The string specified here is expanded and output at the start of every message.
+The default is unset unless file is specified and use_bsmtp is not set, in
+which case it is:
+
+message_prefix = "From ${if def:return_path{$return_path}\
+  {MAILER-DAEMON}} $tod_bsdinbox\n"
+
+Note: If you set use_crlf true, you must change any occurrences of "\n" to "\r\
+n" in message_prefix.
+
++---------------------------------------------------------------+
+|message_suffix|Use: appendfile|Type: string*|Default: see below|
++---------------------------------------------------------------+
+
+The string specified here is expanded and output at the end of every message.
+The default is unset unless file is specified and use_bsmtp is not set, in
+which case it is a single newline character. The suffix can be suppressed by
+setting
+
+message_suffix =
+
+Note: If you set use_crlf true, you must change any occurrences of "\n" to "\r\
+n" in message_suffix.
+
++------------------------------------------------------+
+|mode|Use: appendfile|Type: octal integer|Default: 0600|
++------------------------------------------------------+
+
+If the output file is created, it is given this mode. If it already exists and
+has wider permissions, they are reduced to this mode. If it has narrower
+permissions, an error occurs unless mode_fail_narrower is false. However, if
+the delivery is the result of a save command in a filter file specifying a
+particular mode, the mode of the output file is always forced to take that
+value, and this option is ignored.
+
++--------------------------------------------------------------+
+|mode_fail_narrower|Use: appendfile|Type: boolean|Default: true|
++--------------------------------------------------------------+
+
+This option applies in the case when an existing mailbox file has a narrower
+mode than that specified by the mode option. If mode_fail_narrower is true, the
+delivery is deferred ("mailbox has the wrong mode"); otherwise Exim continues
+with the delivery attempt, using the existing mode of the file.
+
++----------------------------------------------------------+
+|notify_comsat|Use: appendfile|Type: boolean|Default: false|
++----------------------------------------------------------+
+
+If this option is true, the comsat daemon is notified after every successful
+delivery to a user mailbox. This is the daemon that notifies logged on users
+about incoming mail.
+
++--------------------------------------------------+
+|quota|Use: appendfile|Type: string*|Default: unset|
++--------------------------------------------------+
+
+This option imposes a limit on the size of the file to which Exim is appending,
+or to the total space used in the directory tree when the directory option is
+set. In the latter case, computation of the space used is expensive, because
+all the files in the directory (and any sub-directories) have to be
+individually inspected and their sizes summed. (See quota_size_regex and 
+maildir_use_size_file for ways to avoid this in environments where users have
+no shell access to their mailboxes).
+
+As there is no interlock against two simultaneous deliveries into a multi-file
+mailbox, it is possible for the quota to be overrun in this case. For
+single-file mailboxes, of course, an interlock is a necessity.
+
+A file's size is taken as its used value. Because of blocking effects, this may
+be a lot less than the actual amount of disk space allocated to the file. If
+the sizes of a number of files are being added up, the rounding effect can
+become quite noticeable, especially on systems that have large block sizes.
+Nevertheless, it seems best to stick to the used figure, because this is the
+obvious value which users understand most easily.
+
+The value of the option is expanded, and must then be a numerical value
+(decimal point allowed), optionally followed by one of the letters K, M, or G,
+for kilobytes, megabytes, or gigabytes, optionally followed by a slash and
+further option modifiers. If Exim is running on a system with large file
+support (Linux and FreeBSD have this), mailboxes larger than 2G can be handled.
+
+The option modifier no_check can be used to force delivery even if the over
+quota condition is met. The quota gets updated as usual.
+
+Note: A value of zero is interpreted as "no quota".
+
+The expansion happens while Exim is running as root, before it changes uid for
+the delivery. This means that files that are inaccessible to the end user can
+be used to hold quota values that are looked up in the expansion. When delivery
+fails because this quota is exceeded, the handling of the error is as for
+system quota failures.
+
+By default, Exim's quota checking mimics system quotas, and restricts the
+mailbox to the specified maximum size, though the value is not accurate to the
+last byte, owing to separator lines and additional headers that may get added
+during message delivery. When a mailbox is nearly full, large messages may get
+refused even though small ones are accepted, because the size of the current
+message is added to the quota when the check is made. This behaviour can be
+changed by setting quota_is_inclusive false. When this is done, the check for
+exceeding the quota does not include the current message. Thus, deliveries
+continue until the quota has been exceeded; thereafter, no further messages are
+delivered. See also quota_warn_threshold.
+
++------------------------------------------------------------+
+|quota_directory|Use: appendfile|Type: string*|Default: unset|
++------------------------------------------------------------+
+
+This option defines the directory to check for quota purposes when delivering
+into individual files. The default is the delivery directory, or, if a file
+called maildirfolder exists in a maildir directory, the parent of the delivery
+directory.
+
++--------------------------------------------------------+
+|quota_filecount|Use: appendfile|Type: string*|Default: 0|
++--------------------------------------------------------+
+
+This option applies when the directory option is set. It limits the total
+number of files in the directory (compare the inode limit in system quotas). It
+can only be used if quota is also set. The value is expanded; an expansion
+failure causes delivery to be deferred. A value of zero is interpreted as "no
+quota".
+
+The option modifier no_check can be used to force delivery even if the over
+quota condition is met. The quota gets updated as usual.
+
++--------------------------------------------------------------+
+|quota_is_inclusive|Use: appendfile|Type: boolean|Default: true|
++--------------------------------------------------------------+
+
+See quota above.
+
++------------------------------------------------------------+
+|quota_size_regex|Use: appendfile|Type: string|Default: unset|
++------------------------------------------------------------+
+
+This option applies when one of the delivery modes that writes a separate file
+for each message is being used. When Exim wants to find the size of one of
+these files in order to test the quota, it first checks quota_size_regex. If
+this is set to a regular expression that matches the filename, and it captures
+one string, that string is interpreted as a representation of the file's size.
+The value of quota_size_regex is not expanded.
+
+This feature is useful only when users have no shell access to their mailboxes
+- otherwise they could defeat the quota simply by renaming the files. This
+facility can be used with maildir deliveries, by setting maildir_tag to add the
+file length to the filename. For example:
+
+maildir_tag = ,S=$message_size
+quota_size_regex = ,S=(\d+)
+
+An alternative to $message_size is $message_linecount, which contains the
+number of lines in the message.
+
+The regular expression should not assume that the length is at the end of the
+filename (even though maildir_tag puts it there) because maildir MUAs sometimes
+add other information onto the ends of message filenames.
+
+Section 26.7 contains further information.
+
+This option should not be used when other message-handling software may
+duplicate messages by making hardlinks to the files. When that is done Exim
+will count the message size once for each filename, in contrast with the actual
+disk usage. When the option is not set, calculating total usage requires a
+system-call per file to get the size; the number of links is then available
+also as is used to adjust the effective size.
+
++-------------------------------------------------------------------+
+|quota_warn_message|Use: appendfile|Type: string*|Default: see below|
++-------------------------------------------------------------------+
+
+See below for the use of this option. If it is not set when 
+quota_warn_threshold is set, it defaults to
+
+quota_warn_message = "\
+  To: $local_part@$domain\n\
+  Subject: Your mailbox\n\n\
+  This message is automatically created \
+  by mail delivery software.\n\n\
+  The size of your mailbox has exceeded \
+  a warning threshold that is\n\
+  set by the system administrator.\n"
+
++-------------------------------------------------------------+
+|quota_warn_threshold|Use: appendfile|Type: string*|Default: 0|
++-------------------------------------------------------------+
+
+This option is expanded in the same way as quota (see above). If the resulting
+value is greater than zero, and delivery of the message causes the size of the
+file or total space in the directory tree to cross the given threshold, a
+warning message is sent. If quota is also set, the threshold may be specified
+as a percentage of it by following the value with a percent sign. For example:
+
+quota = 10M
+quota_warn_threshold = 75%
+
+If quota is not set, a setting of quota_warn_threshold that ends with a percent
+sign is ignored.
+
+The warning message itself is specified by the quota_warn_message option, and
+it must start with a To: header line containing the recipient(s) of the warning
+message. These do not necessarily have to include the recipient(s) of the
+original message. A Subject: line should also normally be supplied. You can
+include any other header lines that you want. If you do not include a From:
+line, the default is:
+
+From: Mail Delivery System <mailer-daemon@$qualify_domain_sender>
+
+If you supply a Reply-To: line, it overrides the global errors_reply_to option.
+
+The quota option does not have to be set in order to use this option; they are
+independent of one another except when the threshold is specified as a
+percentage.
+
++------------------------------------------------------+
+|use_bsmtp|Use: appendfile|Type: boolean|Default: false|
++------------------------------------------------------+
+
+If this option is set true, appendfile writes messages in "batch SMTP" format,
+with the envelope sender and recipient(s) included as SMTP commands. If you
+want to include a leading HELO command with such messages, you can do so by
+setting the message_prefix option. See section 49.10 for details of batch SMTP.
+
++-----------------------------------------------------+
+|use_crlf|Use: appendfile|Type: boolean|Default: false|
++-----------------------------------------------------+
+
+This option causes lines to be terminated with the two-character CRLF sequence
+(carriage return, linefeed) instead of just a linefeed character. In the case
+of batched SMTP, the byte sequence written to the file is then an exact image
+of what would be sent down a real SMTP connection.
+
+Note: The contents of the message_prefix and message_suffix options (which are
+used to supply the traditional "From " and blank line separators in
+Berkeley-style mailboxes) are written verbatim, so must contain their own
+carriage return characters if these are needed. In cases where these options
+have non-empty defaults, the values end with a single linefeed, so they must be
+changed to end with "\r\n" if use_crlf is set.
+
++---------------------------------------------------------------+
+|use_fcntl_lock|Use: appendfile|Type: boolean|Default: see below|
++---------------------------------------------------------------+
+
+This option controls the use of the fcntl() function to lock a file for
+exclusive use when a message is being appended. It is set by default unless 
+use_flock_lock is set. Otherwise, it should be turned off only if you know that
+all your MUAs use lock file locking. When both use_fcntl_lock and 
+use_flock_lock are unset, use_lockfile must be set.
+
++-----------------------------------------------------------+
+|use_flock_lock|Use: appendfile|Type: boolean|Default: false|
++-----------------------------------------------------------+
+
+This option is provided to support the use of flock() for file locking, for the
+few situations where it is needed. Most modern operating systems support fcntl
+() and lockf() locking, and these two functions interwork with each other. Exim
+uses fcntl() locking by default.
+
+This option is required only if you are using an operating system where flock()
+is used by programs that access mailboxes (typically MUAs), and where flock()
+does not correctly interwork with fcntl(). You can use both fcntl() and flock()
+locking simultaneously if you want.
+
+Not all operating systems provide flock(). Some versions of Solaris do not have
+it (and some, I think, provide a not quite right version built on top of lockf
+()). If the OS does not have flock(), Exim will be built without the ability to
+use it, and any attempt to do so will cause a configuration error.
+
+Warning: flock() locks do not work on NFS files (unless flock() is just being
+mapped onto fcntl() by the OS).
+
++-------------------------------------------------------------+
+|use_lockfile|Use: appendfile|Type: boolean|Default: see below|
++-------------------------------------------------------------+
+
+If this option is turned off, Exim does not attempt to create a lock file when
+appending to a mailbox file. In this situation, the only locking is by fcntl().
+You should only turn use_lockfile off if you are absolutely sure that every MUA
+that is ever going to look at your users' mailboxes uses fcntl() rather than a
+lock file, and even then only when you are not delivering over NFS from more
+than one host.
+
+In order to append to an NFS file safely from more than one host, it is
+necessary to take out a lock before opening the file, and the lock file
+achieves this. Otherwise, even with fcntl() locking, there is a risk of file
+corruption.
+
+The use_lockfile option is set by default unless use_mbx_lock is set. It is not
+possible to turn both use_lockfile and use_fcntl_lock off, except when 
+mbx_format is set.
+
++-------------------------------------------------------------+
+|use_mbx_lock|Use: appendfile|Type: boolean|Default: see below|
++-------------------------------------------------------------+
+
+This option is available only if Exim has been compiled with SUPPORT_MBX set in
+Local/Makefile. Setting the option specifies that special MBX locking rules be
+used. It is set by default if mbx_format is set and none of the locking options
+are mentioned in the configuration. The locking rules are the same as are used
+by the c-client library that underlies Pine and the IMAP4 and POP daemons that
+come with it (see the discussion below). The rules allow for shared access to
+the mailbox. However, this kind of locking does not work when the mailbox is
+NFS mounted.
+
+You can set use_mbx_lock with either (or both) of use_fcntl_lock and 
+use_flock_lock to control what kind of locking is used in implementing the MBX
+locking rules. The default is to use fcntl() if use_mbx_lock is set without 
+use_fcntl_lock or use_flock_lock.
+
+
+26.3 Operational details for appending
+--------------------------------------
+
+Before appending to a file, the following preparations are made:
+
+  * If the name of the file is /dev/null, no action is taken, and a success
+    return is given.
+
+  * If any directories on the file's path are missing, Exim creates them if the
+    create_directory option is set. A created directory's mode is given by the 
+    directory_mode option.
+
+  * If file_format is set, the format of an existing file is checked. If this
+    indicates that a different transport should be used, control is passed to
+    that transport.
+
+  * If use_lockfile is set, a lock file is built in a way that will work
+    reliably over NFS, as follows:
+
+     1. Create a "hitching post" file whose name is that of the lock file with
+        the current time, primary host name, and process id added, by opening
+        for writing as a new file. If this fails with an access error, delivery
+        is deferred.
+
+     2. Close the hitching post file, and hard link it to the lock filename.
+
+     3. If the call to link() succeeds, creation of the lock file has
+        succeeded. Unlink the hitching post name.
+
+     4. Otherwise, use stat() to get information about the hitching post file,
+        and then unlink hitching post name. If the number of links is exactly
+        two, creation of the lock file succeeded but something (for example, an
+        NFS server crash and restart) caused this fact not to be communicated
+        to the link() call.
+
+     5. If creation of the lock file failed, wait for lock_interval and try
+        again, up to lock_retries times. However, since any program that writes
+        to a mailbox should complete its task very quickly, it is reasonable to
+        time out old lock files that are normally the result of user agent and
+        system crashes. If an existing lock file is older than lockfile_timeout
+        Exim attempts to unlink it before trying again.
+
+  * A call is made to lstat() to discover whether the main file exists, and if
+    so, what its characteristics are. If lstat() fails for any reason other
+    than non-existence, delivery is deferred.
+
+  * If the file does exist and is a symbolic link, delivery is deferred, unless
+    the allow_symlink option is set, in which case the ownership of the link is
+    checked, and then stat() is called to find out about the real file, which
+    is then subjected to the checks below. The check on the top-level link
+    ownership prevents one user creating a link for another's mailbox in a
+    sticky directory, though allowing symbolic links in this case is definitely
+    not a good idea. If there is a chain of symbolic links, the intermediate
+    ones are not checked.
+
+  * If the file already exists but is not a regular file, or if the file's
+    owner and group (if the group is being checked - see check_group above) are
+    different from the user and group under which the delivery is running,
+    delivery is deferred.
+
+  * If the file's permissions are more generous than specified, they are
+    reduced. If they are insufficient, delivery is deferred, unless 
+    mode_fail_narrower is set false, in which case the delivery is tried using
+    the existing permissions.
+
+  * The file's inode number is saved, and the file is then opened for
+    appending. If this fails because the file has vanished, appendfile behaves
+    as if it hadn't existed (see below). For any other failures, delivery is
+    deferred.
+
+  * If the file is opened successfully, check that the inode number hasn't
+    changed, that it is still a regular file, and that the owner and
+    permissions have not changed. If anything is wrong, defer delivery and
+    freeze the message.
+
+  * If the file did not exist originally, defer delivery if the file_must_exist
+    option is set. Otherwise, check that the file is being created in a
+    permitted directory if the create_file option is set (deferring on
+    failure), and then open for writing as a new file, with the O_EXCL and
+    O_CREAT options, except when dealing with a symbolic link (the 
+    allow_symlink option must be set). In this case, which can happen if the
+    link points to a non-existent file, the file is opened for writing using
+    O_CREAT but not O_EXCL, because that prevents link following.
+
+  * If opening fails because the file exists, obey the tests given above for
+    existing files. However, to avoid looping in a situation where the file is
+    being continuously created and destroyed, the exists/not-exists loop is
+    broken after 10 repetitions, and the message is then frozen.
+
+  * If opening fails with any other error, defer delivery.
+
+  * Once the file is open, unless both use_fcntl_lock and use_flock_lock are
+    false, it is locked using fcntl() or flock() or both. If use_mbx_lock is
+    false, an exclusive lock is requested in each case. However, if 
+    use_mbx_lock is true, Exim takes out a shared lock on the open file, and an
+    exclusive lock on the file whose name is
+
+    /tmp/.<device-number>.<inode-number>
+
+    using the device and inode numbers of the open mailbox file, in accordance
+    with the MBX locking rules. This file is created with a mode that is
+    specified by the lockfile_mode option.
+
+    If Exim fails to lock the file, there are two possible courses of action,
+    depending on the value of the locking timeout. This is obtained from 
+    lock_fcntl_timeout or lock_flock_timeout, as appropriate.
+
+    If the timeout value is zero, the file is closed, Exim waits for 
+    lock_interval, and then goes back and re-opens the file as above and tries
+    to lock it again. This happens up to lock_retries times, after which the
+    delivery is deferred.
+
+    If the timeout has a value greater than zero, blocking calls to fcntl() or
+    flock() are used (with the given timeout), so there has already been some
+    waiting involved by the time locking fails. Nevertheless, Exim does not
+    give up immediately. It retries up to
+
+    (lock_retries * lock_interval) / <timeout>
+
+    times (rounded up).
+
+At the end of delivery, Exim closes the file (which releases the fcntl() and/or
+flock() locks) and then deletes the lock file if one was created.
+
+
+26.4 Operational details for delivery to a new file
+---------------------------------------------------
+
+When the directory option is set instead of file, each message is delivered
+into a newly-created file or set of files. When appendfile is activated
+directly from a redirect router, neither file nor directory is normally set,
+because the path for delivery is supplied by the router. (See for example, the 
+address_file transport in the default configuration.) In this case, delivery is
+to a new file if either the path name ends in "/", or the maildir_format or 
+mailstore_format option is set.
+
+No locking is required while writing the message to a new file, so the various
+locking options of the transport are ignored. The "From" line that by default
+separates messages in a single file is not normally needed, nor is the escaping
+of message lines that start with "From", and there is no need to ensure a
+newline at the end of each message. Consequently, the default values for 
+check_string, message_prefix, and message_suffix are all unset when any of 
+directory, maildir_format, or mailstore_format is set.
+
+If Exim is required to check a quota setting, it adds up the sizes of all the
+files in the delivery directory by default. However, you can specify a
+different directory by setting quota_directory. Also, for maildir deliveries
+(see below) the maildirfolder convention is honoured.
+
+There are three different ways in which delivery to individual files can be
+done, controlled by the settings of the maildir_format and mailstore_format
+options. Note that code to support maildir or mailstore formats is not included
+in the binary unless SUPPORT_MAILDIR or SUPPORT_MAILSTORE, respectively, is set
+in Local/Makefile.
+
+In all three cases an attempt is made to create the directory and any necessary
+sub-directories if they do not exist, provided that the create_directory option
+is set (the default). The location of a created directory can be constrained by
+setting create_file. A created directory's mode is given by the directory_mode
+option. If creation fails, or if the create_directory option is not set when
+creation is required, delivery is deferred.
+
+
+26.5 Maildir delivery
+---------------------
+
+If the maildir_format option is true, Exim delivers each message by writing it
+to a file whose name is tmp/<stime>.H<mtime>P<pid>.<host> in the directory that
+is defined by the directory option (the "delivery directory"). If the delivery
+is successful, the file is renamed into the new subdirectory.
+
+In the filename, <stime> is the current time of day in seconds, and <mtime> is
+the microsecond fraction of the time. After a maildir delivery, Exim checks
+that the time-of-day clock has moved on by at least one microsecond before
+terminating the delivery process. This guarantees uniqueness for the filename.
+However, as a precaution, Exim calls stat() for the file before opening it. If
+any response other than ENOENT (does not exist) is given, Exim waits 2 seconds
+and tries again, up to maildir_retries times.
+
+Before Exim carries out a maildir delivery, it ensures that subdirectories
+called new, cur, and tmp exist in the delivery directory. If they do not exist,
+Exim tries to create them and any superior directories in their path, subject
+to the create_directory and create_file options. If the 
+maildirfolder_create_regex option is set, and the regular expression it
+contains matches the delivery directory, Exim also ensures that a file called
+maildirfolder exists in the delivery directory. If a missing directory or
+maildirfolder file cannot be created, delivery is deferred.
+
+These features make it possible to use Exim to create all the necessary files
+and directories in a maildir mailbox, including subdirectories for maildir++
+folders. Consider this example:
+
+maildir_format = true
+directory = /var/mail/$local_part_data\
+           ${if eq{$local_part_suffix}{}{}\
+           {/.${substr_1:$local_part_suffix}}}
+maildirfolder_create_regex = /\.[^/]+$
+
+If $local_part_suffix is empty (there was no suffix for the local part),
+delivery is into a toplevel maildir with a name like /var/mail/pimbo (for the
+user called pimbo). The pattern in maildirfolder_create_regex does not match
+this name, so Exim will not look for or create the file /var/mail/pimbo/
+maildirfolder, though it will create /var/mail/pimbo/{cur,new,tmp} if
+necessary.
+
+However, if $local_part_suffix contains "-eximusers" (for example), delivery is
+into the maildir++ folder /var/mail/pimbo/.eximusers, which does match 
+maildirfolder_create_regex. In this case, Exim will create /var/mail/pimbo
+/.eximusers/maildirfolder as well as the three maildir directories /var/mail/
+pimbo/.eximusers/{cur,new,tmp}.
+
+Warning: Take care when setting maildirfolder_create_regex that it does not
+inadvertently match the toplevel maildir directory, because a maildirfolder
+file at top level would completely break quota calculations.
+
+If Exim is required to check a quota setting before a maildir delivery, and 
+quota_directory is not set, it looks for a file called maildirfolder in the
+maildir directory (alongside new, cur, tmp). If this exists, Exim assumes the
+directory is a maildir++ folder directory, which is one level down from the
+user's top level mailbox directory. This causes it to start at the parent
+directory instead of the current directory when calculating the amount of space
+used.
+
+One problem with delivering into a multi-file mailbox is that it is
+computationally expensive to compute the size of the mailbox for quota
+checking. Various approaches have been taken to reduce the amount of work
+needed. The next two sections describe two of them. A third alternative is to
+use some external process for maintaining the size data, and use the expansion
+of the mailbox_size option as a way of importing it into Exim.
+
+
+26.6 Using tags to record message sizes
+---------------------------------------
+
+If maildir_tag is set, the string is expanded for each delivery. When the
+maildir file is renamed into the new sub-directory, the tag is added to its
+name. However, if adding the tag takes the length of the name to the point
+where the test stat() call fails with ENAMETOOLONG, the tag is dropped and the
+maildir file is created with no tag.
+
+Tags can be used to encode the size of files in their names; see 
+quota_size_regex above for an example. The expansion of maildir_tag happens
+after the message has been written. The value of the $message_size variable is
+set to the number of bytes actually written. If the expansion is forced to
+fail, the tag is ignored, but a non-forced failure causes delivery to be
+deferred. The expanded tag may contain any printing characters except "/".
+Non-printing characters in the string are ignored; if the resulting string is
+empty, it is ignored. If it starts with an alphanumeric character, a leading
+colon is inserted; this default has not proven to be the path that popular
+maildir implementations have chosen (but changing it in Exim would break
+backwards compatibility).
+
+For one common implementation, you might set:
+
+maildir_tag = ,S=${message_size}
+
+but you should check the documentation of the other software to be sure.
+
+It is advisable to also set quota_size_regex when setting maildir_tag as this
+allows Exim to extract the size from your tag, instead of having to stat() each
+message file.
+
+
+26.7 Using a maildirsize file
+-----------------------------
+
+If maildir_use_size_file is true, Exim implements the maildir++ rules for
+storing quota and message size information in a file called maildirsize within
+the toplevel maildir directory. If this file does not exist, Exim creates it,
+setting the quota from the quota option of the transport. If the maildir
+directory itself does not exist, it is created before any attempt to write a
+maildirsize file.
+
+The maildirsize file is used to hold information about the sizes of messages in
+the maildir, thus speeding up quota calculations. The quota value in the file
+is just a cache; if the quota is changed in the transport, the new value
+overrides the cached value when the next message is delivered. The cache is
+maintained for the benefit of other programs that access the maildir and need
+to know the quota.
+
+If the quota option in the transport is unset or zero, the maildirsize file is
+maintained (with a zero quota setting), but no quota is imposed.
+
+A regular expression is available for controlling which directories in the
+maildir participate in quota calculations when a maildirsizefile is in use. See
+the description of the maildir_quota_directory_regex option above for details.
+
+
+26.8 Mailstore delivery
+-----------------------
+
+If the mailstore_format option is true, each message is written as two files in
+the given directory. A unique base name is constructed from the message id and
+the current delivery process, and the files that are written use this base name
+plus the suffixes .env and .msg. The .env file contains the message's envelope,
+and the .msg file contains the message itself. The base name is placed in the
+variable $mailstore_basename.
+
+During delivery, the envelope is first written to a file with the suffix .tmp.
+The .msg file is then written, and when it is complete, the .tmp file is
+renamed as the .env file. Programs that access messages in mailstore format
+should wait for the presence of both a .msg and a .env file before accessing
+either of them. An alternative approach is to wait for the absence of a .tmp
+file.
+
+The envelope file starts with any text defined by the mailstore_prefix option,
+expanded and terminated by a newline if there isn't one. Then follows the
+sender address on one line, then all the recipient addresses, one per line.
+There can be more than one recipient only if the batch_max option is set
+greater than one. Finally, mailstore_suffix is expanded and the result appended
+to the file, followed by a newline if it does not end with one.
+
+If expansion of mailstore_prefix or mailstore_suffix ends with a forced
+failure, it is ignored. Other expansion errors are treated as serious
+configuration errors, and delivery is deferred. The variable
+$mailstore_basename is available for use during these expansions.
+
+
+26.9 Non-special new file delivery
+----------------------------------
+
+If neither maildir_format nor mailstore_format is set, a single new file is
+created directly in the named directory. For example, when delivering messages
+into files in batched SMTP format for later delivery to some host (see section
+49.10), a setting such as
+
+directory = /var/bsmtp/$host
+
+might be used. A message is written to a file with a temporary name, which is
+then renamed when the delivery is complete. The final name is obtained by
+expanding the contents of the directory_file option.
+
+
+
+===============================================================================
+27. THE AUTOREPLY TRANSPORT
+
+The autoreply transport is not a true transport in that it does not cause the
+message to be transmitted. Instead, it generates a new mail message as an
+automatic reply to the incoming message. References: and Auto-Submitted: header
+lines are included. These are constructed according to the rules in RFCs 2822
+and 3834, respectively.
+
+If the router that passes the message to this transport does not have the 
+unseen option set, the original message (for the current recipient) is not
+delivered anywhere. However, when the unseen option is set on the router that
+passes the message to this transport, routing of the address continues, so
+another router can set up a normal message delivery.
+
+The autoreply transport is usually run as the result of mail filtering, a
+"vacation" message being the standard example. However, it can also be run
+directly from a router like any other transport. To reduce the possibility of
+message cascades, messages created by the autoreply transport always have empty
+envelope sender addresses, like bounce messages.
+
+The parameters of the message to be sent can be specified in the configuration
+by options described below. However, these are used only when the address
+passed to the transport does not contain its own reply information. When the
+transport is run as a consequence of a mail or vacation command in a filter
+file, the parameters of the message are supplied by the filter, and passed with
+the address. The transport's options that define the message are then ignored
+(so they are not usually set in this case). The message is specified entirely
+by the filter or by the transport; it is never built from a mixture of options.
+However, the file_optional, mode, and return_message options apply in all
+cases.
+
+Autoreply is implemented as a local transport. When used as a result of a
+command in a user's filter file, autoreply normally runs under the uid and gid
+of the user, and with appropriate current and home directories (see chapter 23
+).
+
+There is a subtle difference between routing a message to a pipe transport that
+generates some text to be returned to the sender, and routing it to an 
+autoreply transport. This difference is noticeable only if more than one
+address from the same message is so handled. In the case of a pipe, the
+separate outputs from the different addresses are gathered up and returned to
+the sender in a single message, whereas if autoreply is used, a separate
+message is generated for each address that is passed to it.
+
+Non-printing characters are not permitted in the header lines generated for the
+message that autoreply creates, with the exception of newlines that are
+immediately followed by white space. If any non-printing characters are found,
+the transport defers. Whether characters with the top bit set count as printing
+characters or not is controlled by the print_topbitchars global option.
+
+If any of the generic options for manipulating headers (for example, 
+headers_add) are set on an autoreply transport, they apply to the copy of the
+original message that is included in the generated message when return_message
+is set. They do not apply to the generated message itself.
+
+If the autoreply transport receives return code 2 from Exim when it submits the
+message, indicating that there were no recipients, it does not treat this as an
+error. This means that autoreplies sent to $sender_address when this is empty
+(because the incoming message is a bounce message) do not cause problems. They
+are just discarded.
+
+
+27.1 Private options for autoreply
+----------------------------------
+
++-----------------------------------------------+
+|bcc|Use: autoreply|Type: string*|Default: unset|
++-----------------------------------------------+
+
+This specifies the addresses that are to receive "blind carbon copies" of the
+message when the message is specified by the transport.
+
++----------------------------------------------+
+|cc|Use: autoreply|Type: string*|Default: unset|
++----------------------------------------------+
+
+This specifies recipients of the message and the contents of the Cc: header
+when the message is specified by the transport.
+
++------------------------------------------------+
+|file|Use: autoreply|Type: string*|Default: unset|
++------------------------------------------------+
+
+The contents of the file are sent as the body of the message when the message
+is specified by the transport. If both file and text are set, the text string
+comes first.
+
++-------------------------------------------------------+
+|file_expand|Use: autoreply|Type: boolean|Default: false|
++-------------------------------------------------------+
+
+If this is set, the contents of the file named by the file option are subjected
+to string expansion as they are added to the message.
+
++---------------------------------------------------------+
+|file_optional|Use: autoreply|Type: boolean|Default: false|
++---------------------------------------------------------+
+
+If this option is true, no error is generated if the file named by the file
+option or passed with the address does not exist or cannot be read.
+
++------------------------------------------------+
+|from|Use: autoreply|Type: string*|Default: unset|
++------------------------------------------------+
+
+This specifies the contents of the From: header when the message is specified
+by the transport.
+
++---------------------------------------------------+
+|headers|Use: autoreply|Type: string*|Default: unset|
++---------------------------------------------------+
+
+This specifies additional RFC 2822 headers that are to be added to the message
+when the message is specified by the transport. Several can be given by using "
+\n" to separate them. There is no check on the format.
+
++-----------------------------------------------+
+|log|Use: autoreply|Type: string*|Default: unset|
++-----------------------------------------------+
+
+This option names a file in which a record of every message sent is logged when
+the message is specified by the transport.
+
++-----------------------------------------------------+
+|mode|Use: autoreply|Type: octal integer|Default: 0600|
++-----------------------------------------------------+
+
+If either the log file or the "once" file has to be created, this mode is used.
+
++------------------------------------------------------------+
+|never_mail|Use: autoreply|Type: address list*|Default: unset|
++------------------------------------------------------------+
+
+If any run of the transport creates a message with a recipient that matches any
+item in the list, that recipient is quietly discarded. If all recipients are
+discarded, no message is created. This applies both when the recipients are
+generated by a filter and when they are specified in the transport.
+
++------------------------------------------------+
+|once|Use: autoreply|Type: string*|Default: unset|
++------------------------------------------------+
+
+This option names a file or DBM database in which a record of each To:
+recipient is kept when the message is specified by the transport. Note: This
+does not apply to Cc: or Bcc: recipients.
+
+If once is unset, or is set to an empty string, the message is always sent. By
+default, if once is set to a non-empty filename, the message is not sent if a
+potential recipient is already listed in the database. However, if the 
+once_repeat option specifies a time greater than zero, the message is sent if
+that much time has elapsed since a message was last sent to this recipient. A
+setting of zero time for once_repeat (the default) prevents a message from
+being sent a second time - in this case, zero means infinity.
+
+If once_file_size is zero, a DBM database is used to remember recipients, and
+it is allowed to grow as large as necessary. If once_file_size is set greater
+than zero, it changes the way Exim implements the once option. Instead of using
+a DBM file to record every recipient it sends to, it uses a regular file, whose
+size will never get larger than the given value.
+
+In the file, Exim keeps a linear list of recipient addresses and the times at
+which they were sent messages. If the file is full when a new address needs to
+be added, the oldest address is dropped. If once_repeat is not set, this means
+that a given recipient may receive multiple messages, but at unpredictable
+intervals that depend on the rate of turnover of addresses in the file. If 
+once_repeat is set, it specifies a maximum time between repeats.
+
++------------------------------------------------------+
+|once_file_size|Use: autoreply|Type: integer|Default: 0|
++------------------------------------------------------+
+
+See once above.
+
++--------------------------------------------------+
+|once_repeat|Use: autoreply|Type: time*|Default: 0s|
++--------------------------------------------------+
+
+See once above. After expansion, the value of this option must be a valid time
+value.
+
++----------------------------------------------------+
+|reply_to|Use: autoreply|Type: string*|Default: unset|
++----------------------------------------------------+
+
+This specifies the contents of the Reply-To: header when the message is
+specified by the transport.
+
++----------------------------------------------------------+
+|return_message|Use: autoreply|Type: boolean|Default: false|
++----------------------------------------------------------+
+
+If this is set, a copy of the original message is returned with the new
+message, subject to the maximum size set in the return_size_limit global
+configuration option.
+
++---------------------------------------------------+
+|subject|Use: autoreply|Type: string*|Default: unset|
++---------------------------------------------------+
+
+This specifies the contents of the Subject: header when the message is
+specified by the transport. It is tempting to quote the original subject in
+automatic responses. For example:
+
+subject = Re: $h_subject:
+
+There is a danger in doing this, however. It may allow a third party to
+subscribe your users to an opt-in mailing list, provided that the list accepts
+bounce messages as subscription confirmations. Well-managed lists require a
+non-bounce message to confirm a subscription, so the danger is relatively
+small.
+
++------------------------------------------------+
+|text|Use: autoreply|Type: string*|Default: unset|
++------------------------------------------------+
+
+This specifies a single string to be used as the body of the message when the
+message is specified by the transport. If both text and file are set, the text
+comes first.
+
++----------------------------------------------+
+|to|Use: autoreply|Type: string*|Default: unset|
++----------------------------------------------+
+
+This specifies recipients of the message and the contents of the To: header
+when the message is specified by the transport.
+
+
+
+===============================================================================
+28. THE LMTP TRANSPORT
+
+The lmtp transport runs the LMTP protocol (RFC 2033) over a pipe to a specified
+command or by interacting with a Unix domain socket. This transport is
+something of a cross between the pipe and smtp transports. Exim also has
+support for using LMTP over TCP/IP; this is implemented as an option for the 
+smtp transport. Because LMTP is expected to be of minority interest, the
+default build-time configure in src/EDITME has it commented out. You need to
+ensure that
+
+TRANSPORT_LMTP=yes
+
+is present in your Local/Makefile in order to have the lmtp transport included
+in the Exim binary. The private options of the lmtp transport are as follows:
+
++-----------------------------------------------+
+|batch_id|Use: lmtp|Type: string*|Default: unset|
++-----------------------------------------------+
+
+See the description of local delivery batching in chapter 25.
+
++--------------------------------------------+
+|batch_max|Use: lmtp|Type: integer|Default: 1|
++--------------------------------------------+
+
+This limits the number of addresses that can be handled in a single delivery.
+Most LMTP servers can handle several addresses at once, so it is normally a
+good idea to increase this value. See the description of local delivery
+batching in chapter 25.
+
++----------------------------------------------+
+|command|Use: lmtp|Type: string*|Default: unset|
++----------------------------------------------+
+
+This option must be set if socket is not set. The string is a command which is
+run in a separate process. It is split up into a command name and list of
+arguments, each of which is separately expanded (so expansion cannot change the
+number of arguments). The command is run directly, not via a shell. The message
+is passed to the new process using the standard input and output to operate the
+LMTP protocol.
+
++---------------------------------------------------+
+|ignore_quota|Use: lmtp|Type: boolean|Default: false|
++---------------------------------------------------+
+
+If this option is set true, the string "IGNOREQUOTA" is added to RCPT commands,
+provided that the LMTP server has advertised support for IGNOREQUOTA in its
+response to the LHLO command.
+
++---------------------------------------------+
+|socket|Use: lmtp|Type: string*|Default: unset|
++---------------------------------------------+
+
+This option must be set if command is not set. The result of expansion must be
+the name of a Unix domain socket. The transport connects to the socket and
+delivers the message to it using the LMTP protocol.
+
++----------------------------------------+
+|timeout|Use: lmtp|Type: time|Default: 5m|
++----------------------------------------+
+
+The transport is aborted if the created process or Unix domain socket does not
+respond to LMTP commands or message input within this timeout. Delivery is
+deferred, and will be tried again later. Here is an example of a typical LMTP
+transport:
+
+lmtp:
+  driver = lmtp
+  command = /some/local/lmtp/delivery/program
+  batch_max = 20
+  user = exim
+
+This delivers up to 20 addresses at a time, in a mixture of domains if
+necessary, running as the user exim.
+
+
+
+===============================================================================
+29. THE PIPE TRANSPORT
+
+The pipe transport is used to deliver messages via a pipe to a command running
+in another process. One example is the use of pipe as a pseudo-remote transport
+for passing messages to some other delivery mechanism (such as UUCP). Another
+is the use by individual users to automatically process their incoming
+messages. The pipe transport can be used in one of the following ways:
+
+  * A router routes one address to a transport in the normal way, and the
+    transport is configured as a pipe transport. In this case, $local_part
+    contains the local part of the address (as usual), and the command that is
+    run is specified by the command option on the transport.
+
+  * If the batch_max option is set greater than 1 (the default is 1), the
+    transport can handle more than one address in a single run. In this case,
+    when more than one address is routed to the transport, $local_part is not
+    set (because it is not unique). However, the pseudo-variable
+    $pipe_addresses (described in section 29.3 below) contains all the
+    addresses that are routed to the transport.
+
+  * A router redirects an address directly to a pipe command (for example, from
+    an alias or forward file). In this case, $address_pipe contains the text of
+    the pipe command, and the command option on the transport is ignored unless
+    force_command is set. If only one address is being transported (batch_max
+    is not greater than one, or only one address was redirected to this pipe
+    command), $local_part contains the local part that was redirected.
+
+The pipe transport is a non-interactive delivery method. Exim can also deliver
+messages over pipes using the LMTP interactive protocol. This is implemented by
+the lmtp transport.
+
+In the case when pipe is run as a consequence of an entry in a local user's
+.forward file, the command runs under the uid and gid of that user. In other
+cases, the uid and gid have to be specified explicitly, either on the transport
+or on the router that handles the address. Current and "home" directories are
+also controllable. See chapter 23 for details of the local delivery environment
+and chapter 25 for a discussion of local delivery batching.
+
+Tainted data may not be used for the command name.
+
+
+29.1 Concurrent delivery
+------------------------
+
+If two messages arrive at almost the same time, and both are routed to a pipe
+delivery, the two pipe transports may be run concurrently. You must ensure that
+any pipe commands you set up are robust against this happening. If the commands
+write to a file, the exim_lock utility might be of use. Alternatively the 
+max_parallel option could be used with a value of "1" to enforce serialization.
+
+
+29.2 Returned status and data
+-----------------------------
+
+If the command exits with a non-zero return code, the delivery is deemed to
+have failed, unless either the ignore_status option is set (in which case the
+return code is treated as zero), or the return code is one of those listed in
+the temp_errors option, which are interpreted as meaning "try again later". In
+this case, delivery is deferred. Details of a permanent failure are logged, but
+are not included in the bounce message, which merely contains "local delivery
+failed".
+
+If the command exits on a signal and the freeze_signal option is set then the
+message will be frozen in the queue. If that option is not set, a bounce will
+be sent as normal.
+
+If the return code is greater than 128 and the command being run is a shell
+script, it normally means that the script was terminated by a signal whose
+value is the return code minus 128. The freeze_signal option does not apply in
+this case.
+
+If Exim is unable to run the command (that is, if execve() fails), the return
+code is set to 127. This is the value that a shell returns if it is asked to
+run a non-existent command. The wording for the log line suggests that a
+non-existent command may be the problem.
+
+The return_output option can affect the result of a pipe delivery. If it is set
+and the command produces any output on its standard output or standard error
+streams, the command is considered to have failed, even if it gave a zero
+return code or if ignore_status is set. The output from the command is included
+as part of the bounce message. The return_fail_output option is similar, except
+that output is returned only when the command exits with a failure return code,
+that is, a value other than zero or a code that matches temp_errors.
+
+
+29.3 How the command is run
+---------------------------
+
+The command line is (by default) broken down into a command name and arguments
+by the pipe transport itself. The allow_commands and restrict_to_path options
+can be used to restrict the commands that may be run.
+
+Unquoted arguments are delimited by white space. If an argument appears in
+double quotes, backslash is interpreted as an escape character in the usual
+way. If an argument appears in single quotes, no escaping is done.
+
+String expansion is applied to the command line except when it comes from a
+traditional .forward file (commands from a filter file are expanded). The
+expansion is applied to each argument in turn rather than to the whole line.
+For this reason, any string expansion item that contains white space must be
+quoted so as to be contained within a single argument. A setting such as
+
+command = /some/path ${if eq{$local_part}{postmaster}{xx}{yy}}
+
+will not work, because the expansion item gets split between several arguments.
+You have to write
+
+command = /some/path "${if eq{$local_part}{postmaster}{xx}{yy}}"
+
+to ensure that it is all in one argument. The expansion is done in this way,
+argument by argument, so that the number of arguments cannot be changed as a
+result of expansion, and quotes or backslashes in inserted variables do not
+interact with external quoting. However, this leads to problems if you want to
+generate multiple arguments (or the command name plus arguments) from a single
+expansion. In this situation, the simplest solution is to use a shell. For
+example:
+
+command = /bin/sh -c ${lookup{$local_part}lsearch{/some/file}}
+
+Special handling takes place when an argument consists of precisely the text
+"$pipe_addresses" (no quotes). This is not a general expansion variable; the
+only place this string is recognized is when it appears as an argument for a
+pipe or transport filter command. It causes each address that is being handled
+to be inserted in the argument list at that point as a separate argument. This
+avoids any problems with spaces or shell metacharacters, and is of use when a 
+pipe transport is handling groups of addresses in a batch.
+
+If force_command is enabled on the transport, special handling takes place for
+an argument that consists of precisely the text "$address_pipe". It is handled
+similarly to $pipe_addresses above. It is expanded and each argument is
+inserted in the argument list at that point as a separate argument. The
+"$address_pipe" item does not need to be the only item in the argument; in
+fact, if it were then force_command should behave as a no-op. Rather, it should
+be used to adjust the command run while preserving the argument vector
+separation.
+
+After splitting up into arguments and expansion, the resulting command is run
+in a subprocess directly from the transport, not under a shell. The message
+that is being delivered is supplied on the standard input, and the standard
+output and standard error are both connected to a single pipe that is read by
+Exim. The max_output option controls how much output the command may produce,
+and the return_output and return_fail_output options control what is done with
+it.
+
+Not running the command under a shell (by default) lessens the security risks
+in cases when a command from a user's filter file is built out of data that was
+taken from an incoming message. If a shell is required, it can of course be
+explicitly specified as the command to be run. However, there are circumstances
+where existing commands (for example, in .forward files) expect to be run under
+a shell and cannot easily be modified. To allow for these cases, there is an
+option called use_shell, which changes the way the pipe transport works.
+Instead of breaking up the command line as just described, it expands it as a
+single string and passes the result to /bin/sh. The restrict_to_path option and
+the $pipe_addresses facility cannot be used with use_shell, and the whole
+mechanism is inherently less secure.
+
+
+29.4 Environment variables
+--------------------------
+
+The environment variables listed below are set up when the command is invoked.
+This list is a compromise for maximum compatibility with other MTAs. Note that
+the environment option can be used to add additional variables to this
+environment. The environment for the pipe transport is not subject to the 
+add_environment and keep_environment main config options.
+
+Note: Using enviroment variables loses track of tainted data. Writers of pipe
+transport commands should be wary of data supplied by potential attackers.
+
+DOMAIN               the domain of the address
+HOME                 the home directory, if set
+HOST                 the host name when called from a router (see below)
+LOCAL_PART           see below
+LOCAL_PART_PREFIX    see below
+LOCAL_PART_SUFFIX    see below
+LOGNAME              see below
+MESSAGE_ID           Exim's local ID for the message
+PATH                 as specified by the path option below
+QUALIFY_DOMAIN       the sender qualification domain
+RECIPIENT            the complete recipient address
+SENDER               the sender of the message (empty if a bounce)
+SHELL                /bin/sh
+TZ                   the value of the timezone option, if set
+USER                 see below
+
+When a pipe transport is called directly from (for example) an accept router,
+LOCAL_PART is set to the local part of the address. When it is called as a
+result of a forward or alias expansion, LOCAL_PART is set to the local part of
+the address that was expanded. In both cases, any affixes are removed from the
+local part, and made available in LOCAL_PART_PREFIX and LOCAL_PART_SUFFIX,
+respectively. LOGNAME and USER are set to the same value as LOCAL_PART for
+compatibility with other MTAs.
+
+HOST is set only when a pipe transport is called from a router that associates
+hosts with an address, typically when using pipe as a pseudo-remote transport.
+HOST is set to the first host name specified by the router.
+
+If the transport's generic home_directory option is set, its value is used for
+the HOME environment variable. Otherwise, a home directory may be set by the
+router's transport_home_directory option, which defaults to the user's home
+directory if check_local_user is set.
+
+
+29.5 Private options for pipe
+-----------------------------
+
++----------------------------------------------------------+
+|allow_commands|Use: pipe|Type: string list*|Default: unset|
++----------------------------------------------------------+
+
+The string is expanded, and is then interpreted as a colon-separated list of
+permitted commands. If restrict_to_path is not set, the only commands permitted
+are those in the allow_commands list. They need not be absolute paths; the path
+option is still used for relative paths. If restrict_to_path is set with 
+allow_commands, the command must either be in the allow_commands list, or a
+name without any slashes that is found on the path. In other words, if neither 
+allow_commands nor restrict_to_path is set, there is no restriction on the
+command, but otherwise only commands that are permitted by one or the other are
+allowed. For example, if
+
+allow_commands = /usr/bin/vacation
+
+and restrict_to_path is not set, the only permitted command is /usr/bin/
+vacation. The allow_commands option may not be set if use_shell is set.
+
++-----------------------------------------------+
+|batch_id|Use: pipe|Type: string*|Default: unset|
++-----------------------------------------------+
+
+See the description of local delivery batching in chapter 25.
+
++--------------------------------------------+
+|batch_max|Use: pipe|Type: integer|Default: 1|
++--------------------------------------------+
+
+This limits the number of addresses that can be handled in a single delivery.
+See the description of local delivery batching in chapter 25.
+
++--------------------------------------------------+
+|check_string|Use: pipe|Type: string|Default: unset|
++--------------------------------------------------+
+
+As pipe writes the message, the start of each line is tested for matching 
+check_string, and if it does, the initial matching characters are replaced by
+the contents of escape_string, provided both are set. The value of check_string
+is a literal string, not a regular expression, and the case of any letters it
+contains is significant. When use_bsmtp is set, the contents of check_string
+and escape_string are forced to values that implement the SMTP escaping
+protocol. Any settings made in the configuration file are ignored.
+
++----------------------------------------------+
+|command|Use: pipe|Type: string*|Default: unset|
++----------------------------------------------+
+
+This option need not be set when pipe is being used to deliver to pipes
+obtained directly from address redirections. In other cases, the option must be
+set, to provide a command to be run. It need not yield an absolute path (see
+the path option below). The command is split up into separate arguments by
+Exim, and each argument is separately expanded, as described in section 29.3
+above.
+
+No part of the resulting command may be tainted.
+
++--------------------------------------------------+
+|environment|Use: pipe|Type: string*|Default: unset|
++--------------------------------------------------+
+
+This option is used to add additional variables to the environment in which the
+command runs (see section 29.4 for the default list). Its value is a string
+which is expanded, and then interpreted as a colon-separated list of
+environment settings of the form <name>=<value>.
+
++---------------------------------------------------+
+|escape_string|Use: pipe|Type: string|Default: unset|
++---------------------------------------------------+
+
+See check_string above.
+
++-------------------------------------------------------+
+|freeze_exec_fail|Use: pipe|Type: boolean|Default: false|
++-------------------------------------------------------+
+
+Failure to exec the command in a pipe transport is by default treated like any
+other failure while running the command. However, if freeze_exec_fail is set,
+failure to exec is treated specially, and causes the message to be frozen,
+whatever the setting of ignore_status.
+
++----------------------------------------------------+
+|freeze_signal|Use: pipe|Type: boolean|Default: false|
++----------------------------------------------------+
+
+Normally if the process run by a command in a pipe transport exits on a signal,
+a bounce message is sent. If freeze_signal is set, the message will be frozen
+in Exim's queue instead.
+
++----------------------------------------------------+
+|force_command|Use: pipe|Type: boolean|Default: false|
++----------------------------------------------------+
+
+Normally when a router redirects an address directly to a pipe command the 
+command option on the transport is ignored. If force_command is set, the 
+command option will used. This is especially useful for forcing a wrapper or
+additional argument to be added to the command. For example:
+
+command = /usr/bin/remote_exec myhost -- $address_pipe
+force_command
+
+Note that $address_pipe is handled specially in command when force_command is
+set, expanding out to the original argument vector as separate items, similarly
+to a Unix shell ""$@"" construct.
+
++----------------------------------------------------+
+|ignore_status|Use: pipe|Type: boolean|Default: false|
++----------------------------------------------------+
+
+If this option is true, the status returned by the subprocess that is set up to
+run the command is ignored, and Exim behaves as if zero had been returned.
+Otherwise, a non-zero status or termination by signal causes an error return
+from the transport unless the status value is one of those listed in 
+temp_errors; these cause the delivery to be deferred and tried again later.
+
+Note: This option does not apply to timeouts, which do not return a status. See
+the timeout_defer option for how timeouts are handled.
+
++-------------------------------------------------------+
+|log_defer_output|Use: pipe|Type: boolean|Default: false|
++-------------------------------------------------------+
+
+If this option is set, and the status returned by the command is one of the
+codes listed in temp_errors (that is, delivery was deferred), and any output
+was produced on stdout or stderr, the first line of it is written to the main
+log.
+
++------------------------------------------------------+
+|log_fail_output|Use: pipe|Type: boolean|Default: false|
++------------------------------------------------------+
+
+If this option is set, and the command returns any output on stdout or stderr,
+and also ends with a return code that is neither zero nor one of the return
+codes listed in temp_errors (that is, the delivery failed), the first line of
+output is written to the main log. This option and log_output are mutually
+exclusive. Only one of them may be set.
+
++-------------------------------------------------+
+|log_output|Use: pipe|Type: boolean|Default: false|
++-------------------------------------------------+
+
+If this option is set and the command returns any output on stdout or stderr,
+the first line of output is written to the main log, whatever the return code.
+This option and log_fail_output are mutually exclusive. Only one of them may be
+set.
+
++-----------------------------------------------+
+|max_output|Use: pipe|Type: integer|Default: 20K|
++-----------------------------------------------+
+
+This specifies the maximum amount of output that the command may produce on its
+standard output and standard error file combined. If the limit is exceeded, the
+process running the command is killed. This is intended as a safety measure to
+catch runaway processes. The limit is applied independently of the settings of
+the options that control what is done with such output (for example, 
+return_output). Because of buffering effects, the amount of output may exceed
+the limit by a small amount before Exim notices.
+
++---------------------------------------------------------+
+|message_prefix|Use: pipe|Type: string*|Default: see below|
++---------------------------------------------------------+
+
+The string specified here is expanded and output at the start of every message.
+The default is unset if use_bsmtp is set. Otherwise it is
+
+message_prefix = \
+  From ${if def:return_path{$return_path}{MAILER-DAEMON}}\
+  ${tod_bsdinbox}\n
+
+This is required by the commonly used /usr/bin/vacation program. However, it
+must not be present if delivery is to the Cyrus IMAP server, or to the tmail
+local delivery agent. The prefix can be suppressed by setting
+
+message_prefix =
+
+Note: If you set use_crlf true, you must change any occurrences of "\n" to "\r\
+n" in message_prefix.
+
++---------------------------------------------------------+
+|message_suffix|Use: pipe|Type: string*|Default: see below|
++---------------------------------------------------------+
+
+The string specified here is expanded and output at the end of every message.
+The default is unset if use_bsmtp is set. Otherwise it is a single newline. The
+suffix can be suppressed by setting
+
+message_suffix =
+
+Note: If you set use_crlf true, you must change any occurrences of "\n" to "\r\
+n" in message_suffix.
+
++---------------------------------------------------+
+|path|Use: pipe|Type: string*|Default: /bin:/usr/bin|
++---------------------------------------------------+
+
+This option is expanded and specifies the string that is set up in the PATH
+environment variable of the subprocess. If the command option does not yield an
+absolute path name, the command is sought in the PATH directories, in the usual
+way. Warning: This does not apply to a command specified as a transport filter.
+
++------------------------------------------------------+
+|permit_coredump|Use: pipe|Type: boolean|Default: false|
++------------------------------------------------------+
+
+Normally Exim inhibits core-dumps during delivery. If you have a need to get a
+core-dump of a pipe command, enable this command. This enables core-dumps
+during delivery and affects both the Exim binary and the pipe command run. It
+is recommended that this option remain off unless and until you have a need for
+it and that this only be enabled when needed, as the risk of excessive resource
+consumption can be quite high. Note also that Exim is typically installed as a
+setuid binary and most operating systems will inhibit coredumps of these by
+default, so further OS-specific action may be required.
+
++------------------------------------------------------+
+|pipe_as_creator|Use: pipe|Type: boolean|Default: false|
++------------------------------------------------------+
+
+If the generic user option is not set and this option is true, the delivery
+process is run under the uid that was in force when Exim was originally called
+to accept the message. If the group id is not otherwise set (via the generic 
+group option), the gid that was in force when Exim was originally called to
+accept the message is used.
+
++-------------------------------------------------------+
+|restrict_to_path|Use: pipe|Type: boolean|Default: false|
++-------------------------------------------------------+
+
+When this option is set, any command name not listed in allow_commands must
+contain no slashes. The command is searched for only in the directories listed
+in the path option. This option is intended for use in the case when a pipe
+command has been generated from a user's .forward file. This is usually handled
+by a pipe transport called address_pipe.
+
++---------------------------------------------------------+
+|return_fail_output|Use: pipe|Type: boolean|Default: false|
++---------------------------------------------------------+
+
+If this option is true, and the command produced any output and ended with a
+return code other than zero or one of the codes listed in temp_errors (that is,
+the delivery failed), the output is returned in the bounce message. However, if
+the message has a null sender (that is, it is itself a bounce message), output
+from the command is discarded. This option and return_output are mutually
+exclusive. Only one of them may be set.
+
++----------------------------------------------------+
+|return_output|Use: pipe|Type: boolean|Default: false|
++----------------------------------------------------+
+
+If this option is true, and the command produced any output, the delivery is
+deemed to have failed whatever the return code from the command, and the output
+is returned in the bounce message. Otherwise, the output is just discarded.
+However, if the message has a null sender (that is, it is a bounce message),
+output from the command is always discarded, whatever the setting of this
+option. This option and return_fail_output are mutually exclusive. Only one of
+them may be set.
+
++----------------------------------------------------------+
+|temp_errors|Use: pipe|Type: string list|Default: see below|
++----------------------------------------------------------+
+
+This option contains either a colon-separated list of numbers, or a single
+asterisk. If ignore_status is false and return_output is not set, and the
+command exits with a non-zero return code, the failure is treated as temporary
+and the delivery is deferred if the return code matches one of the numbers, or
+if the setting is a single asterisk. Otherwise, non-zero return codes are
+treated as permanent errors. The default setting contains the codes defined by
+EX_TEMPFAIL and EX_CANTCREAT in sysexits.h. If Exim is compiled on a system
+that does not define these macros, it assumes values of 75 and 73,
+respectively.
+
++----------------------------------------+
+|timeout|Use: pipe|Type: time|Default: 1h|
++----------------------------------------+
+
+If the command fails to complete within this time, it is killed. This normally
+causes the delivery to fail (but see timeout_defer). A zero time interval
+specifies no timeout. In order to ensure that any subprocesses created by the
+command are also killed, Exim makes the initial process a process group leader,
+and kills the whole process group on a timeout. However, this can be defeated
+if one of the processes starts a new process group.
+
++----------------------------------------------------+
+|timeout_defer|Use: pipe|Type: boolean|Default: false|
++----------------------------------------------------+
+
+A timeout in a pipe transport, either in the command that the transport runs,
+or in a transport filter that is associated with it, is by default treated as a
+hard error, and the delivery fails. However, if timeout_defer is set true, both
+kinds of timeout become temporary errors, causing the delivery to be deferred.
+
++------------------------------------------------+
+|umask|Use: pipe|Type: octal integer|Default: 022|
++------------------------------------------------+
+
+This specifies the umask setting for the subprocess that runs the command.
+
++------------------------------------------------+
+|use_bsmtp|Use: pipe|Type: boolean|Default: false|
++------------------------------------------------+
+
+If this option is set true, the pipe transport writes messages in "batch SMTP"
+format, with the envelope sender and recipient(s) included as SMTP commands. If
+you want to include a leading HELO command with such messages, you can do so by
+setting the message_prefix option. See section 49.10 for details of batch SMTP.
+
++---------------------------------------------------------+
+|use_classresources|Use: pipe|Type: boolean|Default: false|
++---------------------------------------------------------+
+
+This option is available only when Exim is running on FreeBSD, NetBSD, or BSD/
+OS. If it is set true, the setclassresources() function is used to set resource
+limits when a pipe transport is run to perform a delivery. The limits for the
+uid under which the pipe is to run are obtained from the login class database.
+
++-----------------------------------------------+
+|use_crlf|Use: pipe|Type: boolean|Default: false|
++-----------------------------------------------+
+
+This option causes lines to be terminated with the two-character CRLF sequence
+(carriage return, linefeed) instead of just a linefeed character. In the case
+of batched SMTP, the byte sequence written to the pipe is then an exact image
+of what would be sent down a real SMTP connection.
+
+The contents of the message_prefix and message_suffix options are written
+verbatim, so must contain their own carriage return characters if these are
+needed. When use_bsmtp is not set, the default values for both message_prefix
+and message_suffix end with a single linefeed, so their values must be changed
+to end with "\r\n" if use_crlf is set.
+
++------------------------------------------------+
+|use_shell|Use: pipe|Type: boolean|Default: false|
++------------------------------------------------+
+
+If this option is set, it causes the command to be passed to /bin/sh instead of
+being run directly from the transport, as described in section 29.3. This is
+less secure, but is needed in some situations where the command is expected to
+be run under a shell and cannot easily be modified. The allow_commands and 
+restrict_to_path options, and the "$pipe_addresses" facility are incompatible
+with use_shell. The command is expanded as a single string, and handed to /bin/
+sh as data for its -c option.
+
+
+29.6 Using an external local delivery agent
+-------------------------------------------
+
+The pipe transport can be used to pass all messages that require local delivery
+to a separate local delivery agent such as procmail. When doing this, care must
+be taken to ensure that the pipe is run under an appropriate uid and gid. In
+some configurations one wants this to be a uid that is trusted by the delivery
+agent to supply the correct sender of the message. It may be necessary to
+recompile or reconfigure the delivery agent so that it trusts an appropriate
+user. The following is an example transport and router configuration for 
+procmail:
+
+# transport
+procmail_pipe:
+  driver = pipe
+  command = /usr/local/bin/procmail -d $local_part_data
+  return_path_add
+  delivery_date_add
+  envelope_to_add
+  check_string = "From "
+  escape_string = ">From "
+  umask = 077
+  user = $local_part_data
+  group = mail
+
+# router
+procmail:
+  driver = accept
+  check_local_user
+  transport = procmail_pipe
+
+In this example, the pipe is run as the local user, but with the group set to 
+mail. An alternative is to run the pipe as a specific user such as mail or exim
+, but in this case you must arrange for procmail to trust that user to supply a
+correct sender address. If you do not specify either a group or a user option,
+the pipe command is run as the local user. The home directory is the user's
+home directory by default.
+
+Note: The command that the pipe transport runs does not begin with
+
+IFS=" "
+
+as shown in some procmail documentation, because Exim does not by default use a
+shell to run pipe commands.
+
+The next example shows a transport and a router for a system where local
+deliveries are handled by the Cyrus IMAP server.
+
+# transport
+local_delivery_cyrus:
+  driver = pipe
+  command = /usr/cyrus/bin/deliver \
+            -- $local_part_data
+  user = cyrus
+  group = mail
+  return_output
+  log_output
+  message_prefix =
+  message_suffix =
+
+# router
+local_user_cyrus:
+  driver = accept
+  check_local_user
+  transport = local_delivery_cyrus
+
+Note the unsetting of message_prefix and message_suffix, and the use of 
+return_output to cause any text written by Cyrus to be returned to the sender.
+
+
+
+===============================================================================
+30. THE SMTP TRANSPORT
+
+The smtp transport delivers messages over TCP/IP connections using the SMTP or
+LMTP protocol. The list of hosts to try can either be taken from the address
+that is being processed (having been set up by the router), or specified
+explicitly for the transport. Timeout and retry processing (see chapter 32) is
+applied to each IP address independently.
+
+
+30.1 Multiple messages on a single connection
+---------------------------------------------
+
+The sending of multiple messages over a single TCP/IP connection can arise in
+two ways:
+
+  * If a message contains more than max_rcpt (see below) addresses that are
+    routed to the same host, more than one copy of the message has to be sent
+    to that host. In this situation, multiple copies may be sent in a single
+    run of the smtp transport over a single TCP/IP connection. (What Exim
+    actually does when it has too many addresses to send in one message also
+    depends on the value of the global remote_max_parallel option. Details are
+    given in section 49.1.)
+
+  * When a message has been successfully delivered over a TCP/IP connection,
+    Exim looks in its hints database to see if there are any other messages
+    awaiting a connection to the same host. If there are, a new delivery
+    process is started for one of them, and the current TCP/IP connection is
+    passed on to it. The new process may in turn send multiple copies and
+    possibly create yet another process.
+
+For each copy sent over the same TCP/IP connection, a sequence counter is
+incremented, and if it ever gets to the value of connection_max_messages, no
+further messages are sent over that connection.
+
+
+30.2 Use of the $host and $host_address variables
+-------------------------------------------------
+
+At the start of a run of the smtp transport, the values of $host and
+$host_address are the name and IP address of the first host on the host list
+passed by the router. However, when the transport is about to connect to a
+specific host, and while it is connected to that host, $host and $host_address
+are set to the values for that host. These are the values that are in force
+when the helo_data, hosts_try_auth, interface, serialize_hosts, and the various
+TLS options are expanded.
+
+
+30.3 Use of $tls_cipher and $tls_peerdn
+---------------------------------------
+
+At the start of a run of the smtp transport, the values of $tls_bits,
+$tls_cipher, $tls_peerdn and $tls_sni are the values that were set when the
+message was received. These are the values that are used for options that are
+expanded before any SMTP connections are made. Just before each connection is
+made, these four variables are emptied. If TLS is subsequently started, they
+are set to the appropriate values for the outgoing connection, and these are
+the values that are in force when any authenticators are run and when the 
+authenticated_sender option is expanded.
+
+These variables are deprecated in favour of $tls_in_cipher et. al. and will be
+removed in a future release.
+
+
+30.4 Private options for smtp
+-----------------------------
+
+The private options of the smtp transport are as follows:
+
++------------------------------------------------------------------+
+|address_retry_include_sender|Use: smtp|Type: boolean|Default: true|
++------------------------------------------------------------------+
+
+When an address is delayed because of a 4xx response to a RCPT command, it is
+the combination of sender and recipient that is delayed in subsequent queue
+runs until the retry time is reached. You can delay the recipient without
+reference to the sender (which is what earlier versions of Exim did), by
+setting address_retry_include_sender false. However, this can lead to problems
+with servers that regularly issue 4xx responses to RCPT commands.
+
++------------------------------------------------------+
+|allow_localhost|Use: smtp|Type: boolean|Default: false|
++------------------------------------------------------+
+
+When a host specified in hosts or fallback_hosts (see below) turns out to be
+the local host, or is listed in hosts_treat_as_local, delivery is deferred by
+default. However, if allow_localhost is set, Exim goes on to do the delivery
+anyway. This should be used only in special cases when the configuration
+ensures that no looping will result (for example, a differently configured Exim
+is listening on the port to which the message is sent).
+
++-----------------------------------------------------------+
+|authenticated_sender|Use: smtp|Type: string*|Default: unset|
++-----------------------------------------------------------+
+
+When Exim has authenticated as a client, or if authenticated_sender_force is
+true, this option sets a value for the AUTH= item on outgoing MAIL commands,
+overriding any existing authenticated sender value. If the string expansion is
+forced to fail, the option is ignored. Other expansion failures cause delivery
+to be deferred. If the result of expansion is an empty string, that is also
+ignored.
+
+The expansion happens after the outgoing connection has been made and TLS
+started, if required. This means that the $host, $host_address, $tls_out_cipher
+, and $tls_out_peerdn variables are set according to the particular connection.
+
+If the SMTP session is not authenticated, the expansion of authenticated_sender
+still happens (and can cause the delivery to be deferred if it fails), but no
+AUTH= item is added to MAIL commands unless authenticated_sender_force is true.
+
+This option allows you to use the smtp transport in LMTP mode to deliver mail
+to Cyrus IMAP and provide the proper local part as the "authenticated sender",
+via a setting such as:
+
+authenticated_sender = $local_part
+
+This removes the need for IMAP subfolders to be assigned special ACLs to allow
+direct delivery to those subfolders.
+
+Because of expected uses such as that just described for Cyrus (when no domain
+is involved), there is no checking on the syntax of the provided value.
+
++-----------------------------------------------------------------+
+|authenticated_sender_force|Use: smtp|Type: boolean|Default: false|
++-----------------------------------------------------------------+
+
+If this option is set true, the authenticated_sender option's value is used for
+the AUTH= item on outgoing MAIL commands, even if Exim has not authenticated as
+a client.
+
++------------------------------------------------+
+|command_timeout|Use: smtp|Type: time|Default: 5m|
++------------------------------------------------+
+
+This sets a timeout for receiving a response to an SMTP command that has been
+sent out. It is also used when waiting for the initial banner line from the
+remote host. Its value must not be zero.
+
++------------------------------------------------+
+|connect_timeout|Use: smtp|Type: time|Default: 5m|
++------------------------------------------------+
+
+This sets a timeout for the connect() function, which sets up a TCP/IP call to
+a remote host. A setting of zero allows the system timeout (typically several
+minutes) to act. To have any effect, the value of this option must be less than
+the system timeout. However, it has been observed that on some systems there is
+no system timeout, which is why the default value for this option is 5 minutes,
+a value recommended by RFC 1123.
+
++------------------------------------------------------------+
+|connection_max_messages|Use: smtp|Type: integer|Default: 500|
++------------------------------------------------------------+
+
+This controls the maximum number of separate message deliveries that are sent
+over a single TCP/IP connection. If the value is zero, there is no limit. For
+testing purposes, this value can be overridden by the -oB command line option.
+
++---------------------------------------------------------------+
+|dane_require_tls_ciphers|Use: smtp|Type: string*|Default: unset|
++---------------------------------------------------------------+
+
+This option may be used to override tls_require_ciphers for connections where
+DANE has been determined to be in effect. If not set, then tls_require_ciphers
+will be used. Normal SMTP delivery is not able to make strong demands of TLS
+cipher configuration, because delivery will fall back to plaintext. Once DANE
+has been determined to be in effect, there is no plaintext fallback and making
+the TLS cipherlist configuration stronger will increase security, rather than
+counter-intuitively decreasing it. If the option expands to be empty or is
+forced to fail, then it will be treated as unset and tls_require_ciphers will
+be used instead.
+
++---------------------------------------------+
+|data_timeout|Use: smtp|Type: time|Default: 5m|
++---------------------------------------------+
+
+This sets a timeout for the transmission of each block in the data portion of
+the message. As a result, the overall timeout for a message depends on the size
+of the message. Its value must not be zero. See also final_timeout.
+
++-------------------------------------------------+
+|dkim_canon|Use: smtp|Type: string*|Default: unset|
++-------------------------------------------------+
+
+DKIM signing option. For details see section 58.2.
+
++-------------------------------------------------------+
+|dkim_domain|Use: smtp|Type: string list*|Default: unset|
++-------------------------------------------------------+
+
+DKIM signing option. For details see section 58.2.
+
++-------------------------------------------------+
+|dkim_hash|Use: smtp|Type: string*|Default: sha256|
++-------------------------------------------------+
+
+DKIM signing option. For details see section 58.2.
+
++----------------------------------------------------+
+|dkim_identity|Use: smtp|Type: string*|Default: unset|
++----------------------------------------------------+
+
+DKIM signing option. For details see section 58.2.
+
++-------------------------------------------------------+
+|dkim_private_key|Use: smtp|Type: string*|Default: unset|
++-------------------------------------------------------+
+
+DKIM signing option. For details see section 58.2.
+
++----------------------------------------------------+
+|dkim_selector|Use: smtp|Type: string*|Default: unset|
++----------------------------------------------------+
+
+DKIM signing option. For details see section 58.2.
+
++--------------------------------------------------+
+|dkim_strict|Use: smtp|Type: string*|Default: unset|
++--------------------------------------------------+
+
+DKIM signing option. For details see section 58.2.
+
++----------------------------------------------------------+
+|dkim_sign_headers|Use: smtp|Type: string*|Default: per RFC|
++----------------------------------------------------------+
+
+DKIM signing option. For details see section 58.2.
+
++------------------------------------------------------+
+|dkim_timestamps|Use: smtp|Type: string*|Default: unset|
++------------------------------------------------------+
+
+DKIM signing option. For details see section 58.2.
+
++--------------------------------------------------------+
+|delay_after_cutoff|Use: smtp|Type: boolean|Default: true|
++--------------------------------------------------------+
+
+This option controls what happens when all remote IP addresses for a given
+domain have been inaccessible for so long that they have passed their retry
+cutoff times.
+
+In the default state, if the next retry time has not been reached for any of
+them, the address is bounced without trying any deliveries. In other words,
+Exim delays retrying an IP address after the final cutoff time until a new
+retry time is reached, and can therefore bounce an address without ever trying
+a delivery, when machines have been down for a long time. Some people are
+unhappy at this prospect, so...
+
+If delay_after_cutoff is set false, Exim behaves differently. If all IP
+addresses are past their final cutoff time, Exim tries to deliver to those IP
+addresses that have not been tried since the message arrived. If there are
+none, of if they all fail, the address is bounced. In other words, it does not
+delay when a new message arrives, but immediately tries those expired IP
+addresses that haven't been tried since the message arrived. If there is a
+continuous stream of messages for the dead hosts, unsetting delay_after_cutoff
+means that there will be many more attempts to deliver to them.
+
++--------------------------------------------------------+
+|dns_qualify_single|Use: smtp|Type: boolean|Default: true|
++--------------------------------------------------------+
+
+If the hosts or fallback_hosts option is being used, and the gethostbyname
+option is false, the RES_DEFNAMES resolver option is set. See the 
+qualify_single option in chapter 17 for more details.
+
++---------------------------------------------------------+
+|dns_search_parents|Use: smtp|Type: boolean|Default: false|
++---------------------------------------------------------+
+
+If the hosts or fallback_hosts option is being used, and the gethostbyname
+option is false, the RES_DNSRCH resolver option is set. See the search_parents
+option in chapter 17 for more details.
+
++--------------------------------------------------------------+
+|dnssec_request_domains|Use: smtp|Type: domain list*|Default: *|
++--------------------------------------------------------------+
+
+DNS lookups for domains matching dnssec_request_domains will be done with the
+DNSSEC request bit set. Setting this transport option is only useful if the
+transport overrides or sets the host names. See the dnssec_request_domains
+router option.
+
++------------------------------------------------------------------+
+|dnssec_require_domains|Use: smtp|Type: domain list*|Default: unset|
++------------------------------------------------------------------+
+
+DNS lookups for domains matching dnssec_require_domains will be done with the
+DNSSEC request bit set. Setting this transport option is only useful if the
+transport overrides or sets the host names. See the dnssec_require_domains
+router option.
+
++-------------------------------------------+
+|dscp|Use: smtp|Type: string*|Default: unset|
++-------------------------------------------+
+
+This option causes the DSCP value associated with a socket to be set to one of
+a number of fixed strings or to numeric value. The -bI:dscp option may be used
+to ask Exim which names it knows of. Common values include "throughput",
+"mincost", and on newer systems "ef", "af41", etc. Numeric values may be in the
+range 0 to 0x3F.
+
+The outbound packets from Exim will be marked with this value in the header
+(for IPv4, the TOS field; for IPv6, the TCLASS field); there is no guarantee
+that these values will have any effect, not be stripped by networking
+equipment, or do much of anything without cooperation with your Network
+Engineer and those of all network operators between the source and destination.
+
++---------------------------------------------------------+
+|fallback_hosts|Use: smtp|Type: string list|Default: unset|
++---------------------------------------------------------+
+
+String expansion is not applied to this option. The argument must be a
+colon-separated list of host names or IP addresses, optionally also including
+port numbers, though the separator can be changed, as described in section 6.20
+. Each individual item in the list is the same as an item in a route_list
+setting for the manualroute router, as described in section 20.5.
+
+Fallback hosts can also be specified on routers, which associate them with the
+addresses they process. As for the hosts option without hosts_override, 
+fallback_hosts specified on the transport is used only if the address does not
+have its own associated fallback host list. Unlike hosts, a setting of 
+fallback_hosts on an address is not overridden by hosts_override. However, 
+hosts_randomize does apply to fallback host lists.
+
+If Exim is unable to deliver to any of the hosts for a particular address, and
+the errors are not permanent rejections, the address is put on a separate
+transport queue with its host list replaced by the fallback hosts, unless the
+address was routed via MX records and the current host was in the original MX
+list. In that situation, the fallback host list is not used.
+
+Once normal deliveries are complete, the fallback queue is delivered by
+re-running the same transports with the new host lists. If several failing
+addresses have the same fallback hosts (and max_rcpt permits it), a single copy
+of the message is sent.
+
+The resolution of the host names on the fallback list is controlled by the 
+gethostbyname option, as for the hosts option. Fallback hosts apply both to
+cases when the host list comes with the address and when it is taken from hosts
+. This option provides a "use a smart host only if delivery fails" facility.
+
++-----------------------------------------------+
+|final_timeout|Use: smtp|Type: time|Default: 10m|
++-----------------------------------------------+
+
+This is the timeout that applies while waiting for the response to the final
+line containing just "." that terminates a message. Its value must not be zero.
+
++----------------------------------------------------+
+|gethostbyname|Use: smtp|Type: boolean|Default: false|
++----------------------------------------------------+
+
+If this option is true when the hosts and/or fallback_hosts options are being
+used, names are looked up using gethostbyname() (or getipnodebyname() when
+available) instead of using the DNS. Of course, that function may in fact use
+the DNS, but it may also consult other sources of information such as /etc/
+hosts.
+
++---------------------------------------------------------+
+|gnutls_compat_mode|Use: smtp|Type: boolean|Default: unset|
++---------------------------------------------------------+
+
+This option controls whether GnuTLS is used in compatibility mode in an Exim
+server. This reduces security slightly, but improves interworking with older
+implementations of TLS.
+
++----------------------------------------------------+
+|helo_data|Use: smtp|Type: string*|Default: see below|
++----------------------------------------------------+
+
+The value of this option is expanded after a connection to a another host has
+been set up. The result is used as the argument for the EHLO, HELO, or LHLO
+command that starts the outgoing SMTP or LMTP session. The default value of the
+option is:
+
+$primary_hostname
+
+During the expansion, the variables $host and $host_address are set to the
+identity of the remote host, and the variables $sending_ip_address and
+$sending_port are set to the local IP address and port number that are being
+used. These variables can be used to generate different values for different
+servers or different local IP addresses. For example, if you want the string
+that is used for helo_data to be obtained by a DNS lookup of the outgoing
+interface address, you could use this:
+
+helo_data = ${lookup dnsdb{ptr=$sending_ip_address} \
+  {${listextract{1}{<\n $value}}} \
+  {$primary_hostname}}
+
+The use of helo_data applies both to sending messages and when doing callouts.
+
++-----------------------------------------------------------------+
+|host_name_extract|Use: smtp|Type: string list*|Default: see below|
++-----------------------------------------------------------------+
+
+Some mail-accepting sites (notably Microsoft) operate many servers behind a
+network load-balancer. When this is done, with separated TLS session caches,
+TLS session resuption becomes problematic. It will only succeed when the same
+server happens to be selected by the load-balancer, matching the session stored
+in the client's cache.
+
+Exim can pull out a server name, if there is one, from the response to the
+client's SMTP EHLO command. The default value of this option:
+
+    ${if and { {match {$host} {.outlook.com\$}} \
+               {match {$item} {\N^250-([\w.]+)\s\N}} \
+             } {$1}}
+
+suffices for one known case. During the expansion of this option the $item
+variable will have the server's EHLO response. The result of the option
+expansion is included in the key used to store and retrieve the TLS session,
+for session resumption.
+
+Operators of high-load sites may wish to evaluate their logs for indications of
+other destination sites operating load-balancers, and develop a suitable
+expression for this option. The smtp:ehlo event and the $tls_out_resumption
+variable will be useful for such work.
+
++-------------------------------------------------+
+|hosts|Use: smtp|Type: string list*|Default: unset|
++-------------------------------------------------+
+
+Hosts are associated with an address by a router such as dnslookup, which finds
+the hosts by looking up the address domain in the DNS, or by manualroute, which
+has lists of hosts in its configuration. However, email addresses can be passed
+to the smtp transport by any router, and not all of them can provide an
+associated list of hosts.
+
+The hosts option specifies a list of hosts to be used if the address being
+processed does not have any hosts associated with it. The hosts specified by 
+hosts are also used, whether or not the address has its own hosts, if 
+hosts_override is set.
+
+The string is first expanded, before being interpreted as a colon-separated
+list of host names or IP addresses, possibly including port numbers. The
+separator may be changed to something other than colon, as described in section
+6.20. Each individual item in the list is the same as an item in a route_list
+setting for the manualroute router, as described in section 20.5. However, note
+that the "/MX" facility of the manualroute router is not available here.
+
+If the expansion fails, delivery is deferred. Unless the failure was caused by
+the inability to complete a lookup, the error is logged to the panic log as
+well as the main log. Host names are looked up either by searching directly for
+address records in the DNS or by calling gethostbyname() (or getipnodebyname()
+when available), depending on the setting of the gethostbyname option. When
+Exim is compiled with IPv6 support, if a host that is looked up in the DNS has
+both IPv4 and IPv6 addresses, both types of address are used.
+
+During delivery, the hosts are tried in order, subject to their retry status,
+unless hosts_randomize is set.
+
++-----------------------------------------------------------+
+|hosts_avoid_esmtp|Use: smtp|Type: host list*|Default: unset|
++-----------------------------------------------------------+
+
+This option is for use with broken hosts that announce ESMTP facilities (for
+example, PIPELINING) and then fail to implement them properly. When a host
+matches hosts_avoid_esmtp, Exim sends HELO rather than EHLO at the start of the
+SMTP session. This means that it cannot use any of the ESMTP facilities such as
+AUTH, PIPELINING, SIZE, and STARTTLS.
+
++----------------------------------------------------------------+
+|hosts_avoid_pipelining|Use: smtp|Type: host list*|Default: unset|
++----------------------------------------------------------------+
+
+Exim will not use the ESMTP PIPELINING extension when delivering to any host
+that matches this list, even if the server host advertises PIPELINING support.
+
++------------------------------------------------------------+
+|hosts_pipe_connect|Use: smtp|Type: host list*|Default: unset|
++------------------------------------------------------------+
+
+If Exim is built with the SUPPORT_PIPE_CONNECT build option this option
+controls which to hosts the facility watched for and recorded, and used for
+subsequent connections.
+
+The retry hints database is used for the record, and records are subject to the
+retry_data_expire option. When used, the pipelining saves on roundtrip times.
+It also turns SMTP into a client-first protocol so combines well with TCP Fast
+Open.
+
+See also the pipelining_connect_advertise_hosts main option.
+
+Note:
+
+When the facility is used, if the transport interface option is unset the 
+helo_data option
+
+will be expanded before the $sending_ip_address variable is filled in. A check
+is made for the use of that variable, without the presence of a "def:" test on
+it, but suitably complex coding can avoid the check and produce unexpected
+results. You have been warned.
+
++---------------------------------------------------------+
+|hosts_avoid_tls|Use: smtp|Type: host list*|Default: unset|
++---------------------------------------------------------+
+
+Exim will not try to start a TLS session when delivering to any host that
+matches this list. See chapter 43 for details of TLS.
+
++----------------------------------------------------------------+
+|hosts_verify_avoid_tls|Use: smtp|Type: host list*|Default: unset|
++----------------------------------------------------------------+
+
+Exim will not try to start a TLS session for a verify callout, or when
+delivering in cutthrough mode, to any host that matches this list.
+
++------------------------------------------------+
+|hosts_max_try|Use: smtp|Type: integer|Default: 5|
++------------------------------------------------+
+
+This option limits the number of IP addresses that are tried for any one
+delivery in cases where there are temporary delivery errors. Section 30.5
+describes in detail how the value of this option is used.
+
++-----------------------------------------------------------+
+|hosts_max_try_hardlimit|Use: smtp|Type: integer|Default: 50|
++-----------------------------------------------------------+
+
+This is an additional check on the maximum number of IP addresses that Exim
+tries for any one delivery. Section 30.5 describes its use and why it exists.
+
++----------------------------------------------------------+
+|hosts_nopass_tls|Use: smtp|Type: host list*|Default: unset|
++----------------------------------------------------------+
+
+For any host that matches this list, a connection on which a TLS session has
+been started will not be passed to a new delivery process for sending another
+message on the same connection. See section 43.13 for an explanation of when
+this might be needed.
+
++-----------------------------------------------------------+
+|hosts_noproxy_tls|Use: smtp|Type: host list*|Default: unset|
++-----------------------------------------------------------+
+
+For any host that matches this list, a TLS session which has been started will
+not be passed to a new delivery process for sending another message on the same
+session.
+
+The traditional implementation closes down TLS and re-starts it in the new
+process, on the same open TCP connection, for each successive message sent. If
+permitted by this option a pipe to to the new process is set up instead, and
+the original process maintains the TLS connection and proxies the SMTP
+connection from and to the new process and any subsequents. The new process has
+no access to TLS information, so cannot include it in logging.
+
++-----------------------------------------------------+
+|hosts_override|Use: smtp|Type: boolean|Default: false|
++-----------------------------------------------------+
+
+If this option is set and the hosts option is also set, any hosts that are
+attached to the address are ignored, and instead the hosts specified by the 
+hosts option are always used. This option does not apply to fallback_hosts.
+
++------------------------------------------------------+
+|hosts_randomize|Use: smtp|Type: boolean|Default: false|
++------------------------------------------------------+
+
+If this option is set, and either the list of hosts is taken from the hosts or
+the fallback_hosts option, or the hosts supplied by the router were not
+obtained from MX records (this includes fallback hosts from the router), and
+were not randomized by the router, the order of trying the hosts is randomized
+each time the transport runs. Randomizing the order of a host list can be used
+to do crude load sharing.
+
+When hosts_randomize is true, a host list may be split into groups whose order
+is separately randomized. This makes it possible to set up MX-like behaviour.
+The boundaries between groups are indicated by an item that is just "+" in the
+host list. For example:
+
+hosts = host1:host2:host3:+:host4:host5
+
+The order of the first three hosts and the order of the last two hosts is
+randomized for each use, but the first three always end up before the last two.
+If hosts_randomize is not set, a "+" item in the list is ignored.
+
++------------------------------------------------------------+
+|hosts_require_auth|Use: smtp|Type: host list*|Default: unset|
++------------------------------------------------------------+
+
+This option provides a list of servers for which authentication must succeed
+before Exim will try to transfer a message. If authentication fails for servers
+which are not in this list, Exim tries to send unauthenticated. If
+authentication fails for one of these servers, delivery is deferred. This
+temporary error is detectable in the retry rules, so it can be turned into a
+hard failure if required. See also hosts_try_auth, and chapter 33 for details
+of authentication.
+
++--------------------------------------------------------+
+|hosts_request_ocsp|Use: smtp|Type: host list*|Default: *|
++--------------------------------------------------------+
+
+Exim will request a Certificate Status on a TLS session for any host that
+matches this list. tls_verify_certificates should also be set for the
+transport.
+
++------------------------------------------------------------+
+|hosts_require_alpn|Use: smtp|Type: host list*|Default: unset|
++------------------------------------------------------------+
+
+If the TLS library supports ALPN then a successful negotiation of ALPN will be
+required for any host matching the list, for TLS to be used. See also the 
+tls_alpn option.
+
+Note: prevention of fallback to in-clear connection is not managed by this
+option; see hosts_require_tls.
+
++------------------------------------------------------------+
+|hosts_require_dane|Use: smtp|Type: host list*|Default: unset|
++------------------------------------------------------------+
+
+If built with DANE support, Exim will require that a DNSSEC-validated TLSA
+record is present for any host matching the list, and that a DANE-verified TLS
+connection is made. There will be no fallback to in-clear communication. See
+the dnssec_request_domains router and transport options. See section 43.18.
+
++------------------------------------------------------------+
+|hosts_require_ocsp|Use: smtp|Type: host list*|Default: unset|
++------------------------------------------------------------+
+
+Exim will request, and check for a valid Certificate Status being given, on a
+TLS session for any host that matches this list. tls_verify_certificates should
+also be set for the transport.
+
++-----------------------------------------------------------+
+|hosts_require_tls|Use: smtp|Type: host list*|Default: unset|
++-----------------------------------------------------------+
+
+Exim will insist on using a TLS session when delivering to any host that
+matches this list. See chapter 43 for details of TLS. Note: This option affects
+outgoing mail only. To insist on TLS for incoming messages, use an appropriate
+ACL.
+
++--------------------------------------------------------+
+|hosts_try_auth|Use: smtp|Type: host list*|Default: unset|
++--------------------------------------------------------+
+
+This option provides a list of servers to which, provided they announce
+authentication support, Exim will attempt to authenticate as a client when it
+connects. If authentication fails and hosts_require_auth permits, Exim will try
+to transfer the message unauthenticated. See also chapter 33 for details of
+authentication.
+
++--------------------------------------------------------+
+|hosts_try_chunking|Use: smtp|Type: host list*|Default: *|
++--------------------------------------------------------+
+
+This option provides a list of servers to which, provided they announce
+CHUNKING support, Exim will attempt to use BDAT commands rather than DATA.
+Unless DKIM signing is being done, BDAT will not be used in conjunction with a
+transport filter.
+
++----------------------------------------------------+
+|hosts_try_dane|Use: smtp|Type: host list*|Default: *|
++----------------------------------------------------+
+
+If built with DANE support, Exim will look up a TLSA record for any host
+matching the list, If one is found and that lookup was DNSSEC-validated, then
+Exim requires that a DANE-verified TLS connection is made for that host; there
+will be no fallback to in-clear communication. See the dnssec_request_domains
+router and transport options. See section 43.18.
+
++--------------------------------------------------------+
+|hosts_try_fastopen|Use: smtp|Type: host list*|Default: *|
++--------------------------------------------------------+
+
+This option provides a list of servers to which, provided the facility is
+supported by this system, Exim will attempt to perform a TCP Fast Open. No data
+is sent on the SYN segment but, if the remote server also supports the
+facility, it can send its SMTP banner immediately after the SYN,ACK segment.
+This can save up to one round-trip time.
+
+The facility is only active for previously-contacted servers, as the initiator
+must present a cookie in the SYN segment.
+
+On (at least some) current Linux distributions the facility must be enabled in
+the kernel by the sysadmin before the support is usable. There is no option for
+control of the server side; if the system supports it it is always enabled.
+Note that lengthy operations in the connect ACL, such as DNSBL lookups, will
+still delay the emission of the SMTP banner.
+
++----------------------------------------------------+
+|hosts_try_prdr|Use: smtp|Type: host list*|Default: *|
++----------------------------------------------------+
+
+This option provides a list of servers to which, provided they announce PRDR
+support, Exim will attempt to negotiate PRDR for multi-recipient messages. The
+option can usually be left as default.
+
++-----------------------------------------------------+
+|interface|Use: smtp|Type: string list*|Default: unset|
++-----------------------------------------------------+
+
+This option specifies which interface to bind to when making an outgoing SMTP
+call. The value is an IP address, not an interface name such as "eth0". Do not
+confuse this with the interface address that was used when a message was
+received, which is in $received_ip_address, formerly known as
+$interface_address. The name was changed to minimize confusion with the
+outgoing interface address. There is no variable that contains an outgoing
+interface address because, unless it is set by this option, its value is
+unknown.
+
+During the expansion of the interface option the variables $host and
+$host_address refer to the host to which a connection is about to be made
+during the expansion of the string. Forced expansion failure, or an empty
+string result causes the option to be ignored. Otherwise, after expansion, the
+string must be a list of IP addresses, colon-separated by default, but the
+separator can be changed in the usual way (6.21). For example:
+
+interface = <; 192.168.123.123 ; 3ffe:ffff:836f::fe86:a061
+
+The first interface of the correct type (IPv4 or IPv6) is used for the outgoing
+connection. If none of them are the correct type, the option is ignored. If 
+interface is not set, or is ignored, the system's IP functions choose which
+interface to use if the host has more than one.
+
++-----------------------------------------------+
+|keepalive|Use: smtp|Type: boolean|Default: true|
++-----------------------------------------------+
+
+This option controls the setting of SO_KEEPALIVE on outgoing TCP/IP socket
+connections. When set, it causes the kernel to probe idle connections
+periodically, by sending packets with "old" sequence numbers. The other end of
+the connection should send a acknowledgment if the connection is still okay or
+a reset if the connection has been aborted. The reason for doing this is that
+it has the beneficial effect of freeing up certain types of connection that can
+get stuck when the remote host is disconnected without tidying up the TCP/IP
+call properly. The keepalive mechanism takes several hours to detect
+unreachable hosts.
+
++--------------------------------------------------------+
+|lmtp_ignore_quota|Use: smtp|Type: boolean|Default: false|
++--------------------------------------------------------+
+
+If this option is set true when the protocol option is set to "lmtp", the
+string "IGNOREQUOTA" is added to RCPT commands, provided that the LMTP server
+has advertised support for IGNOREQUOTA in its response to the LHLO command.
+
++---------------------------------------------+
+|max_rcpt|Use: smtp|Type: integer|Default: 100|
++---------------------------------------------+
+
+This option limits the number of RCPT commands that are sent in a single SMTP
+message transaction. Each set of addresses is treated independently, and so can
+cause parallel connections to the same host if remote_max_parallel permits
+this. A value setting of zero disables the limit.
+
++-------------------------------------------------------------+
+|message_linelength_limit|Use: smtp|Type: integer|Default: 998|
++-------------------------------------------------------------+
+
+This option sets the maximum line length, in bytes, that the transport will
+send. Any messages with lines exceeding the given value will fail and a
+failure-DSN ("bounce") message will if possible be returned to the sender. The
+default value is that defined by the SMTP standards.
+
+It is generally wise to also check in the data ACL so that messages received
+via SMTP can be refused without producing a bounce.
+
++---------------------------------------------------+
+|multi_domain|Use: smtp|Type: boolean*|Default: true|
++---------------------------------------------------+
+
+When this option is set, the smtp transport can handle a number of addresses
+containing a mixture of different domains provided they all resolve to the same
+list of hosts. Turning the option off restricts the transport to handling only
+one domain at a time. This is useful if you want to use $domain in an expansion
+for the transport, because it is set only when there is a single domain
+involved in a remote delivery.
+
+It is expanded per-address and can depend on any of $address_data, $domain_data
+, $local_part_data, $host, $host_address and $host_port.
+
+If the connection is DANE-enabled then this option is ignored; only messages
+having the domain used for the DANE TLSA lookup are sent on the connection.
+
++-----------------------------------------------+
+|port|Use: smtp|Type: string*|Default: see below|
++-----------------------------------------------+
+
+This option specifies the TCP/IP port on the server to which Exim connects. 
+Note: Do not confuse this with the port that was used when a message was
+received, which is in $received_port, formerly known as $interface_port. The
+name was changed to minimize confusion with the outgoing port. There is no
+variable that contains an outgoing port.
+
+If the value of this option begins with a digit it is taken as a port number;
+otherwise it is looked up using getservbyname(). The default value is normally
+"smtp", but if protocol is set to "lmtp" the default is "lmtp" and if protocol
+is set to "smtps" the default is "smtps". If the expansion fails, or if a port
+number cannot be found, delivery is deferred.
+
+Note that at least one Linux distribution has been seen failing to put "smtps"
+in its "/etc/services" file, resulting is such deferrals.
+
++---------------------------------------------+
+|protocol|Use: smtp|Type: string|Default: smtp|
++---------------------------------------------+
+
+If this option is set to "lmtp" instead of "smtp", the default value for the 
+port option changes to "lmtp", and the transport operates the LMTP protocol
+(RFC 2033) instead of SMTP. This protocol is sometimes used for local
+deliveries into closed message stores. Exim also has support for running LMTP
+over a pipe to a local process - see chapter 28.
+
+If this option is set to "smtps", the default value for the port option changes
+to "smtps", and the transport initiates TLS immediately after connecting, as an
+outbound SSL-on-connect, instead of using STARTTLS to upgrade. The Internet
+standards bodies used to strongly discourage use of this mode, but as of RFC
+8314 it is preferred over STARTTLS for message submission (as distinct from
+MTA-MTA communication).
+
++---------------------------------------------------------------+
+|retry_include_ip_address|Use: smtp|Type: boolean*|Default: true|
++---------------------------------------------------------------+
+
+Exim normally includes both the host name and the IP address in the key it
+constructs for indexing retry data after a temporary delivery failure. This
+means that when one of several IP addresses for a host is failing, it gets
+tried periodically (controlled by the retry rules), but use of the other IP
+addresses is not affected.
+
+However, in some dialup environments hosts are assigned a different IP address
+each time they connect. In this situation the use of the IP address as part of
+the retry key leads to undesirable behaviour. Setting this option false causes
+Exim to use only the host name. Since it is expanded it can be made to depend
+on the host or domain.
+
++---------------------------------------------------------+
+|serialize_hosts|Use: smtp|Type: host list*|Default: unset|
++---------------------------------------------------------+
+
+Because Exim operates in a distributed manner, if several messages for the same
+host arrive at around the same time, more than one simultaneous connection to
+the remote host can occur. This is not usually a problem except when there is a
+slow link between the hosts. In that situation it may be helpful to restrict
+Exim to one connection at a time. This can be done by setting serialize_hosts
+to match the relevant hosts.
+
+Exim implements serialization by means of a hints database in which a record is
+written whenever a process connects to one of the restricted hosts. The record
+is deleted when the connection is completed. Obviously there is scope for
+records to get left lying around if there is a system or program crash. To
+guard against this, Exim ignores any records that are more than six hours old.
+
+If you set up this kind of serialization, you should also arrange to delete the
+relevant hints database whenever your system reboots. The names of the files
+start with misc and they are kept in the spool/db directory. There may be one
+or two files, depending on the type of DBM in use. The same files are used for
+ETRN serialization.
+
+See also the max_parallel generic transport option.
+
++---------------------------------------------------+
+|size_addition|Use: smtp|Type: integer|Default: 1024|
++---------------------------------------------------+
+
+If a remote SMTP server indicates that it supports the SIZE option of the MAIL
+command, Exim uses this to pass over the message size at the start of an SMTP
+transaction. It adds the value of size_addition to the value it sends, to allow
+for headers and other text that may be added during delivery by configuration
+options or in a transport filter. It may be necessary to increase this if a lot
+of text is added to messages.
+
+Alternatively, if the value of size_addition is set negative, it disables the
+use of the SIZE option altogether.
+
++--------------------------------------------------+
+|socks_proxy|Use: smtp|Type: string*|Default: unset|
++--------------------------------------------------+
+
+This option enables use of SOCKS proxies for connections made by the transport.
+For details see section 59.2.
+
++-----------------------------------------------+
+|tls_alpn|Use: smtp|Type: string*|Default: unset|
++-----------------------------------------------+
+
+If this option is set and the TLS library supports ALPN, the value given is
+used.
+
+As of writing no value has been standardised for email use. The authors suggest
+using "smtp".
+
++------------------------------------------------------+
+|tls_certificate|Use: smtp|Type: string*|Default: unset|
++------------------------------------------------------+
+
+The value of this option must be the absolute path to a file which contains the
+client's certificate, for possible use when sending a message over an encrypted
+connection. The values of $host and $host_address are set to the name and
+address of the server during the expansion. See chapter 43 for details of TLS.
+
+Note: This option must be set if you want Exim to be able to use a TLS
+certificate when sending messages as a client. The global option of the same
+name specifies the certificate for Exim as a server; it is not automatically
+assumed that the same certificate should be used when Exim is operating as a
+client.
+
++----------------------------------------------+
+|tls_crl|Use: smtp|Type: string*|Default: unset|
++----------------------------------------------+
+
+This option specifies a certificate revocation list. The expanded value must be
+the name of a file that contains a CRL in PEM format.
+
++-----------------------------------------------------+
+|tls_dh_min_bits|Use: smtp|Type: integer|Default: 1024|
++-----------------------------------------------------+
+
+When establishing a TLS session, if a ciphersuite which uses Diffie-Hellman key
+agreement is negotiated, the server will provide a large prime number for use.
+This option establishes the minimum acceptable size of that number. If the
+parameter offered by the server is too small, then the TLS handshake will fail.
+
+Only supported when using GnuTLS.
+
++-----------------------------------------------------+
+|tls_privatekey|Use: smtp|Type: string*|Default: unset|
++-----------------------------------------------------+
+
+The value of this option must be the absolute path to a file which contains the
+client's private key. This is used when sending a message over an encrypted
+connection using a client certificate. The values of $host and $host_address
+are set to the name and address of the server during the expansion. If this
+option is unset, or the expansion is forced to fail, or the result is an empty
+string, the private key is assumed to be in the same file as the certificate.
+See chapter 43 for details of TLS.
+
++----------------------------------------------------------+
+|tls_require_ciphers|Use: smtp|Type: string*|Default: unset|
++----------------------------------------------------------+
+
+The value of this option must be a list of permitted cipher suites, for use
+when setting up an outgoing encrypted connection. (There is a global option of
+the same name for controlling incoming connections.) The values of $host and
+$host_address are set to the name and address of the server during the
+expansion. See chapter 43 for details of TLS; note that this option is used in
+different ways by OpenSSL and GnuTLS (see sections 43.4 and 43.5). For GnuTLS,
+the order of the ciphers is a preference order.
+
++--------------------------------------------------------------+
+|tls_resumption_hosts|Use: smtp|Type: host list*|Default: unset|
++--------------------------------------------------------------+
+
+This option controls which connections to use the TLS resumption feature. See
+43.17 for details.
+
++----------------------------------------------+
+|tls_sni|Use: smtp|Type: string*|Default: unset|
++----------------------------------------------+
+
+If this option is set and the connection is not DANE-validated then it sets the
+$tls_out_sni variable and causes any TLS session to pass this value as the
+Server Name Indication extension to the remote side, which can be used by the
+remote side to select an appropriate certificate and private key for the
+session.
+
+See 43.12 for more information.
+
+Note that for OpenSSL, this feature requires a build of OpenSSL that supports
+TLS extensions.
+
++-----------------------------------------------------------+
+|tls_tempfail_tryclear|Use: smtp|Type: boolean|Default: true|
++-----------------------------------------------------------+
+
+When the server host is not in hosts_require_tls, and there is a problem in
+setting up a TLS session, this option determines whether or not Exim should try
+to deliver the message unencrypted. If it is set false, delivery to the current
+host is deferred; if there are other hosts, they are tried. If this option is
+set true, Exim attempts to deliver unencrypted after a 4xx response to
+STARTTLS. Also, if STARTTLS is accepted, but the subsequent TLS negotiation
+fails, Exim closes the current connection (because it is in an unknown state),
+opens a new one to the same host, and then tries the delivery in clear.
+
++----------------------------------------------------------+
+|tls_try_verify_hosts|Use: smtp|Type: host list*|Default: *|
++----------------------------------------------------------+
+
+This option gives a list of hosts for which, on encrypted connections,
+certificate verification will be tried but need not succeed. The 
+tls_verify_certificates option must also be set. Note that unless the host is
+in this list TLS connections will be denied to hosts using self-signed
+certificates when tls_verify_certificates is matched. The
+$tls_out_certificate_verified variable is set when certificate verification
+succeeds.
+
++---------------------------------------------------------------+
+|tls_verify_cert_hostnames|Use: smtp|Type: host list*|Default: *|
++---------------------------------------------------------------+
+
+This option give a list of hosts for which, while verifying the server
+certificate, checks will be included on the host name (note that this will
+generally be the result of a DNS MX lookup) versus Subject and
+Subject-Alternate-Name fields. Wildcard names are permitted limited to being
+the initial component of a 3-or-more component FQDN.
+
+There is no equivalent checking on client certificates.
+
++---------------------------------------------------------------+
+|tls_verify_certificates|Use: smtp|Type: string*|Default: system|
++---------------------------------------------------------------+
+
+The value of this option must be either the word "system" or the absolute path
+to a file or directory containing permitted certificates for servers, for use
+when setting up an encrypted connection.
+
+The "system" value for the option will use a location compiled into the SSL
+library. This is not available for GnuTLS versions preceding 3.0.20; a value of
+"system" is taken as empty and an explicit location must be specified.
+
+The use of a directory for the option value is not available for GnuTLS
+versions preceding 3.3.6 and a single file must be used.
+
+With OpenSSL the certificates specified explicitly either by file or directory
+are added to those given by the system default location.
+
+The values of $host and $host_address are set to the name and address of the
+server during the expansion of this option. See chapter 43 for details of TLS.
+
+For back-compatibility, if neither tls_verify_hosts nor tls_try_verify_hosts
+are set (a single-colon empty list counts as being set) and certificate
+verification fails the TLS connection is closed.
+
++----------------------------------------------------------+
+|tls_verify_hosts|Use: smtp|Type: host list*|Default: unset|
++----------------------------------------------------------+
+
+This option gives a list of hosts for which, on encrypted connections,
+certificate verification must succeed. The tls_verify_certificates option must
+also be set. If both this option and tls_try_verify_hosts are unset operation
+is as if this option selected all hosts. Warning: Including a host in 
+tls_verify_hosts does not require that connections use TLS. Fallback to
+in-clear communication will be done unless restricted by the hosts_require_tls
+option.
+
++-----------------------------------------------------+
+|utf8_downconvert|Use: smtp|Type: integer*|Default: -1|
++-----------------------------------------------------+
+
+If built with internationalization support, this option controls conversion of
+UTF-8 in message envelope addresses to a-label form. If, after expansion, the
+value is 1, 0, or -1 then this value overrides any value previously set for the
+message. Otherwise, any previously set value is used. To permit use of a
+previous value, set this option to an empty string. For details on the values
+see section 60.1.
+
+
+30.5 How the limits for the number of hosts to try are used
+-----------------------------------------------------------
+
+There are two options that are concerned with the number of hosts that are
+tried when an SMTP delivery takes place. They are hosts_max_try and 
+hosts_max_try_hardlimit.
+
+The hosts_max_try option limits the number of hosts that are tried for a single
+delivery. However, despite the term "host" in its name, the option actually
+applies to each IP address independently. In other words, a multihomed host is
+treated as several independent hosts, just as it is for retrying.
+
+Many of the larger ISPs have multiple MX records which often point to
+multihomed hosts. As a result, a list of a dozen or more IP addresses may be
+created as a result of routing one of these domains.
+
+Trying every single IP address on such a long list does not seem sensible; if
+several at the top of the list fail, it is reasonable to assume there is some
+problem that is likely to affect all of them. Roughly speaking, the value of 
+hosts_max_try is the maximum number that are tried before deferring the
+delivery. However, the logic cannot be quite that simple.
+
+Firstly, IP addresses that are skipped because their retry times have not
+arrived do not count, and in addition, addresses that are past their retry
+limits are also not counted, even when they are tried. This means that when
+some IP addresses are past their retry limits, more than the value of 
+hosts_max_retry may be tried. The reason for this behaviour is to ensure that
+all IP addresses are considered before timing out an email address (but see
+below for an exception).
+
+Secondly, when the hosts_max_try limit is reached, Exim looks down the host
+list to see if there is a subsequent host with a different (higher valued) MX.
+If there is, that host is considered next, and the current IP address is used
+but not counted. This behaviour helps in the case of a domain with a retry rule
+that hardly ever delays any hosts, as is now explained:
+
+Consider the case of a long list of hosts with one MX value, and a few with a
+higher MX value. If hosts_max_try is small (the default is 5) only a few hosts
+at the top of the list are tried at first. With the default retry rule, which
+specifies increasing retry times, the higher MX hosts are eventually tried when
+those at the top of the list are skipped because they have not reached their
+retry times.
+
+However, it is common practice to put a fixed short retry time on domains for
+large ISPs, on the grounds that their servers are rarely down for very long.
+Unfortunately, these are exactly the domains that tend to resolve to long lists
+of hosts. The short retry time means that the lowest MX hosts are tried every
+time. The attempts may be in a different order because of random sorting, but
+without the special MX check, the higher MX hosts would never be tried until
+all the lower MX hosts had timed out (which might be several days), because
+there are always some lower MX hosts that have reached their retry times. With
+the special check, Exim considers at least one IP address from each MX value at
+every delivery attempt, even if the hosts_max_try limit has already been
+reached.
+
+The above logic means that hosts_max_try is not a hard limit, and in
+particular, Exim normally eventually tries all the IP addresses before timing
+out an email address. When hosts_max_try was implemented, this seemed a
+reasonable thing to do. Recently, however, some lunatic DNS configurations have
+been set up with hundreds of IP addresses for some domains. It can take a very
+long time indeed for an address to time out in these cases.
+
+The hosts_max_try_hardlimit option was added to help with this problem. Exim
+never tries more than this number of IP addresses; if it hits this limit and
+they are all timed out, the email address is bounced, even though not all
+possible IP addresses have been tried.
+
+
+
+===============================================================================
+31. ADDRESS REWRITING
+
+There are some circumstances in which Exim automatically rewrites domains in
+addresses. The two most common are when an address is given without a domain
+(referred to as an "unqualified address") or when an address contains an
+abbreviated domain that is expanded by DNS lookup.
+
+Unqualified envelope addresses are accepted only for locally submitted
+messages, or for messages that are received from hosts matching 
+sender_unqualified_hosts or recipient_unqualified_hosts, as appropriate.
+Unqualified addresses in header lines are qualified if they are in locally
+submitted messages, or messages from hosts that are permitted to send
+unqualified envelope addresses. Otherwise, unqualified addresses in header
+lines are neither qualified nor rewritten.
+
+One situation in which Exim does not automatically rewrite a domain is when it
+is the name of a CNAME record in the DNS. The older RFCs suggest that such a
+domain should be rewritten using the "canonical" name, and some MTAs do this.
+The new RFCs do not contain this suggestion.
+
+
+31.1 Explicitly configured address rewriting
+--------------------------------------------
+
+This chapter describes the rewriting rules that can be used in the main rewrite
+section of the configuration file, and also in the generic headers_rewrite
+option that can be set on any transport.
+
+Some people believe that configured address rewriting is a Mortal Sin. Others
+believe that life is not possible without it. Exim provides the facility; you
+do not have to use it.
+
+The main rewriting rules that appear in the "rewrite" section of the
+configuration file are applied to addresses in incoming messages, both envelope
+addresses and addresses in header lines. Each rule specifies the types of
+address to which it applies.
+
+Whether or not addresses in header lines are rewritten depends on the origin of
+the headers and the type of rewriting. Global rewriting, that is, rewriting
+rules from the rewrite section of the configuration file, is applied only to
+those headers that were received with the message. Header lines that are added
+by ACLs or by a system filter or by individual routers or transports (which are
+specific to individual recipient addresses) are not rewritten by the global
+rules.
+
+Rewriting at transport time, by means of the headers_rewrite option, applies
+all headers except those added by routers and transports. That is, as well as
+the headers that were received with the message, it also applies to headers
+that were added by an ACL or a system filter.
+
+In general, rewriting addresses from your own system or domain has some
+legitimacy. Rewriting other addresses should be done only with great care and
+in special circumstances. The author of Exim believes that rewriting should be
+used sparingly, and mainly for "regularizing" addresses in your own domains.
+Although it can sometimes be used as a routing tool, this is very strongly
+discouraged.
+
+There are two commonly encountered circumstances where rewriting is used, as
+illustrated by these examples:
+
+  * The company whose domain is hitch.fict.example has a number of hosts that
+    exchange mail with each other behind a firewall, but there is only a single
+    gateway to the outer world. The gateway rewrites *.hitch.fict.example as 
+    hitch.fict.example when sending mail off-site.
+
+  * A host rewrites the local parts of its own users so that, for example, 
+    fp42@hitch.fict.example becomes Ford.Prefect@hitch.fict.example.
+
+
+31.2 When does rewriting happen?
+--------------------------------
+
+Configured address rewriting can take place at several different stages of a
+message's processing.
+
+At the start of an ACL for MAIL, the sender address may have been rewritten by
+a special SMTP-time rewrite rule (see section 31.9), but no ordinary rewrite
+rules have yet been applied. If, however, the sender address is verified in the
+ACL, it is rewritten before verification, and remains rewritten thereafter. The
+subsequent value of $sender_address is the rewritten address. This also applies
+if sender verification happens in a RCPT ACL. Otherwise, when the sender
+address is not verified, it is rewritten as soon as a message's header lines
+have been received.
+
+Similarly, at the start of an ACL for RCPT, the current recipient's address may
+have been rewritten by a special SMTP-time rewrite rule, but no ordinary
+rewrite rules have yet been applied to it. However, the behaviour is different
+from the sender address when a recipient is verified. The address is rewritten
+for the verification, but the rewriting is not remembered at this stage. The
+value of $local_part and $domain after verification are always the same as they
+were before (that is, they contain the unrewritten - except for SMTP-time
+rewriting - address).
+
+As soon as a message's header lines have been received, all the envelope
+recipient addresses are permanently rewritten, and rewriting is also applied to
+the addresses in the header lines (if configured). This happens before adding
+any header lines that were specified in MAIL or RCPT ACLs, and before the DATA
+ACL and local_scan() functions are run.
+
+When an address is being routed, either for delivery or for verification,
+rewriting is applied immediately to child addresses that are generated by
+redirection, unless no_rewrite is set on the router.
+
+At transport time, additional rewriting of addresses in header lines can be
+specified by setting the generic headers_rewrite option on a transport. This
+option contains rules that are identical in form to those in the rewrite
+section of the configuration file. They are applied to the original message
+header lines and any that were added by ACLs or a system filter. They are not
+applied to header lines that are added by routers or the transport.
+
+The outgoing envelope sender can be rewritten by means of the return_path
+transport option. However, it is not possible to rewrite envelope recipients at
+transport time.
+
+
+31.3 Testing the rewriting rules that apply on input
+----------------------------------------------------
+
+Exim's input rewriting configuration appears in a part of the runtime
+configuration file headed by "begin rewrite". It can be tested by the -brw
+command line option. This takes an address (which can be a full RFC 2822
+address) as its argument. The output is a list of how the address would be
+transformed by the rewriting rules for each of the different places it might
+appear in an incoming message, that is, for each different header and for the
+envelope sender and recipient fields. For example,
+
+exim -brw ph10@exim.workshop.example
+
+might produce the output
+
+sender: Philip.Hazel@exim.workshop.example
+from: Philip.Hazel@exim.workshop.example
+to: ph10@exim.workshop.example
+cc: ph10@exim.workshop.example
+bcc: ph10@exim.workshop.example
+reply-to: Philip.Hazel@exim.workshop.example
+env-from: Philip.Hazel@exim.workshop.example
+env-to: ph10@exim.workshop.example
+
+which shows that rewriting has been set up for that address when used in any of
+the source fields, but not when it appears as a recipient address. At the
+present time, there is no equivalent way of testing rewriting rules that are
+set for a particular transport.
+
+
+31.4 Rewriting rules
+--------------------
+
+The rewrite section of the configuration file consists of lines of rewriting
+rules in the form
+
+<source pattern>  <replacement>  <flags>
+
+Rewriting rules that are specified for the headers_rewrite generic transport
+option are given as a colon-separated list. Each item in the list takes the
+same form as a line in the main rewriting configuration (except that any colons
+must be doubled, of course).
+
+The formats of source patterns and replacement strings are described below.
+Each is terminated by white space, unless enclosed in double quotes, in which
+case normal quoting conventions apply inside the quotes. The flags are single
+characters which may appear in any order. Spaces and tabs between them are
+ignored.
+
+For each address that could potentially be rewritten, the rules are scanned in
+order, and replacements for the address from earlier rules can themselves be
+replaced by later rules (but see the "q" and "R" flags).
+
+The order in which addresses are rewritten is undefined, may change between
+releases, and must not be relied on, with one exception: when a message is
+received, the envelope sender is always rewritten first, before any header
+lines are rewritten. For example, the replacement string for a rewrite of an
+address in To: must not assume that the message's address in From: has (or has
+not) already been rewritten. However, a rewrite of From: may assume that the
+envelope sender has already been rewritten.
+
+The variables $local_part and $domain can be used in the replacement string to
+refer to the address that is being rewritten. Note that lookup-driven rewriting
+can be done by a rule of the form
+
+*@*   ${lookup ...
+
+where the lookup key uses $1 and $2 or $local_part and $domain to refer to the
+address that is being rewritten.
+
+
+31.5 Rewriting patterns
+-----------------------
+
+The source pattern in a rewriting rule is any item which may appear in an
+address list (see section 10.20). It is in fact processed as a single-item
+address list, which means that it is expanded before being tested against the
+address. As always, if you use a regular expression as a pattern, you must take
+care to escape dollar and backslash characters, or use the "\N" facility to
+suppress string expansion within the regular expression.
+
+Domains in patterns should be given in lower case. Local parts in patterns are
+case-sensitive. If you want to do case-insensitive matching of local parts, you
+can use a regular expression that starts with "^(?i)".
+
+After matching, the numerical variables $1, $2, etc. may be set, depending on
+the type of match which occurred. These can be used in the replacement string
+to insert portions of the incoming address. $0 always refers to the complete
+incoming address. When a regular expression is used, the numerical variables
+are set from its capturing subexpressions. For other types of pattern they are
+set as follows:
+
+  * If a local part or domain starts with an asterisk, the numerical variables
+    refer to the character strings matched by asterisks, with $1 associated
+    with the first asterisk, and $2 with the second, if present. For example,
+    if the pattern
+
+    *queen@*.fict.example
+
+    is matched against the address hearts-queen@wonderland.fict.example then
+
+    $0 = hearts-queen@wonderland.fict.example
+    $1 = hearts-
+    $2 = wonderland
+
+    Note that if the local part does not start with an asterisk, but the domain
+    does, it is $1 that contains the wild part of the domain.
+
+  * If the domain part of the pattern is a partial lookup, the wild and fixed
+    parts of the domain are placed in the next available numerical variables.
+    Suppose, for example, that the address foo@bar.baz.example is processed by
+    a rewriting rule of the form
+
+    *@partial-dbm;/some/dbm/file    <replacement string>
+
+    and the key in the file that matches the domain is "*.baz.example". Then
+
+    $1 = foo
+    $2 = bar
+    $3 = baz.example
+
+    If the address foo@baz.example is looked up, this matches the same wildcard
+    file entry, and in this case $2 is set to the empty string, but $3 is still
+    set to baz.example. If a non-wild key is matched in a partial lookup, $2 is
+    again set to the empty string and $3 is set to the whole domain. For
+    non-partial domain lookups, no numerical variables are set.
+
+
+31.6 Rewriting replacements
+---------------------------
+
+If the replacement string for a rule is a single asterisk, addresses that match
+the pattern and the flags are not rewritten, and no subsequent rewriting rules
+are scanned. For example,
+
+hatta@lookingglass.fict.example  *  f
+
+specifies that hatta@lookingglass.fict.example is never to be rewritten in 
+From: headers.
+
+If the replacement string is not a single asterisk, it is expanded, and must
+yield a fully qualified address. Within the expansion, the variables
+$local_part and $domain refer to the address that is being rewritten. Any
+letters they contain retain their original case - they are not lower cased. The
+numerical variables are set up according to the type of pattern that matched
+the address, as described above. If the expansion is forced to fail by the
+presence of "fail" in a conditional or lookup item, rewriting by the current
+rule is abandoned, but subsequent rules may take effect. Any other expansion
+failure causes the entire rewriting operation to be abandoned, and an entry
+written to the panic log.
+
+
+31.7 Rewriting flags
+--------------------
+
+There are three different kinds of flag that may appear on rewriting rules:
+
+  * Flags that specify which headers and envelope addresses to rewrite: E, F,
+    T, b, c, f, h, r, s, t.
+
+  * A flag that specifies rewriting at SMTP time: S.
+
+  * Flags that control the rewriting process: Q, q, R, w.
+
+For rules that are part of the headers_rewrite generic transport option, E, F,
+T, and S are not permitted.
+
+
+31.8 Flags specifying which headers and envelope addresses to rewrite
+---------------------------------------------------------------------
+
+If none of the following flag letters, nor the "S" flag (see section 31.9) are
+present, a main rewriting rule applies to all headers and to both the sender
+and recipient fields of the envelope, whereas a transport-time rewriting rule
+just applies to all headers. Otherwise, the rewriting rule is skipped unless
+the relevant addresses are being processed.
+
+E       rewrite all envelope fields
+F       rewrite the envelope From field
+T       rewrite the envelope To field
+b       rewrite the Bcc: header
+c       rewrite the Cc: header
+f       rewrite the From: header
+h       rewrite all headers
+r       rewrite the Reply-To: header
+s       rewrite the Sender: header
+t       rewrite the To: header
+
+"All headers" means all of the headers listed above that can be selected
+individually, plus their Resent- versions. It does not include other headers
+such as Subject: etc.
+
+You should be particularly careful about rewriting Sender: headers, and
+restrict this to special known cases in your own domains.
+
+
+31.9 The SMTP-time rewriting flag
+---------------------------------
+
+The rewrite flag "S" specifies a rewrite of incoming envelope addresses at SMTP
+time, as soon as an address is received in a MAIL or RCPT command, and before
+any other processing; even before syntax checking. The pattern is required to
+be a regular expression, and it is matched against the whole of the data for
+the command, including any surrounding angle brackets.
+
+This form of rewrite rule allows for the handling of addresses that are not
+compliant with RFCs 2821 and 2822 (for example, "bang paths" in batched SMTP
+input). Because the input is not required to be a syntactically valid address,
+the variables $local_part and $domain are not available during the expansion of
+the replacement string. The result of rewriting replaces the original address
+in the MAIL or RCPT command.
+
+
+31.10 Flags controlling the rewriting process
+---------------------------------------------
+
+There are four flags which control the way the rewriting process works. These
+take effect only when a rule is invoked, that is, when the address is of the
+correct type (matches the flags) and matches the pattern:
+
+  * If the "Q" flag is set on a rule, the rewritten address is permitted to be
+    an unqualified local part. It is qualified with qualify_recipient. In the
+    absence of "Q" the rewritten address must always include a domain.
+
+  * If the "q" flag is set on a rule, no further rewriting rules are
+    considered, even if no rewriting actually takes place because of a "fail"
+    in the expansion. The "q" flag is not effective if the address is of the
+    wrong type (does not match the flags) or does not match the pattern.
+
+  * The "R" flag causes a successful rewriting rule to be re-applied to the new
+    address, up to ten times. It can be combined with the "q" flag, to stop
+    rewriting once it fails to match (after at least one successful rewrite).
+
+  * When an address in a header is rewritten, the rewriting normally applies
+    only to the working part of the address, with any comments and RFC 2822
+    "phrase" left unchanged. For example, rewriting might change
+
+    From: Ford Prefect <fp42@restaurant.hitch.fict.example>
+
+    into
+
+    From: Ford Prefect <prefectf@hitch.fict.example>
+
+    Sometimes there is a need to replace the whole address item, and this can
+    be done by adding the flag letter "w" to a rule. If this is set on a rule
+    that causes an address in a header line to be rewritten, the entire address
+    is replaced, not just the working part. The replacement must be a complete
+    RFC 2822 address, including the angle brackets if necessary. If text
+    outside angle brackets contains a character whose value is greater than 126
+    or less than 32 (except for tab), the text is encoded according to RFC
+    2047. The character set is taken from headers_charset, which gets its
+    default at build time.
+
+    When the "w" flag is set on a rule that causes an envelope address to be
+    rewritten, all but the working part of the replacement address is
+    discarded.
+
+
+31.11 Rewriting examples
+------------------------
+
+Here is an example of the two common rewriting paradigms:
+
+*@*.hitch.fict.example  $1@hitch.fict.example
+*@hitch.fict.example    ${lookup{$1}dbm{/etc/realnames}\
+                     {$value}fail}@hitch.fict.example bctfrF
+
+Note the use of "fail" in the lookup expansion in the second rule, forcing the
+string expansion to fail if the lookup does not succeed. In this context it has
+the effect of leaving the original address unchanged, but Exim goes on to
+consider subsequent rewriting rules, if any, because the "q" flag is not
+present in that rule. An alternative to "fail" would be to supply $1
+explicitly, which would cause the rewritten address to be the same as before,
+at the cost of a small bit of processing. Not supplying either of these is an
+error, since the rewritten address would then contain no local part.
+
+The first example above replaces the domain with a superior, more general
+domain. This may not be desirable for certain local parts. If the rule
+
+root@*.hitch.fict.example  *
+
+were inserted before the first rule, rewriting would be suppressed for the
+local part root at any domain ending in hitch.fict.example.
+
+Rewriting can be made conditional on a number of tests, by making use of ${if
+in the expansion item. For example, to apply a rewriting rule only to messages
+that originate outside the local host:
+
+*@*.hitch.fict.example  "${if !eq {$sender_host_address}{}\
+                         {$1@hitch.fict.example}fail}"
+
+The replacement string is quoted in this example because it contains white
+space.
+
+Exim does not handle addresses in the form of "bang paths". If it sees such an
+address it treats it as an unqualified local part which it qualifies with the
+local qualification domain (if the source of the message is local or if the
+remote host is permitted to send unqualified addresses). Rewriting can
+sometimes be used to handle simple bang paths with a fixed number of
+components. For example, the rule
+
+\N^([^!]+)!(.*)@your.domain.example$\N   $2@$1
+
+rewrites a two-component bang path host.name!user as the domain address 
+user@host.name. However, there is a security implication in using this as a
+global rewriting rule for envelope addresses. It can provide a backdoor method
+for using your system as a relay, because the incoming addresses appear to be
+local. If the bang path addresses are received via SMTP, it is safer to use the
+"S" flag to rewrite them as they are received, so that relay checking can be
+done on the rewritten addresses.
+
+
+
+===============================================================================
+32. RETRY CONFIGURATION
+
+The "retry" section of the runtime configuration file contains a list of retry
+rules that control how often Exim tries to deliver messages that cannot be
+delivered at the first attempt. If there are no retry rules (the section is
+empty or not present), there are no retries. In this situation, temporary
+errors are treated as permanent. The default configuration contains a single,
+general-purpose retry rule (see section 7.6). The -brt command line option can
+be used to test which retry rule will be used for a given address, domain and
+error.
+
+The most common cause of retries is temporary failure to deliver to a remote
+host because the host is down, or inaccessible because of a network problem.
+Exim's retry processing in this case is applied on a per-host (strictly, per IP
+address) basis, not on a per-message basis. Thus, if one message has recently
+been delayed, delivery of a new message to the same host is not immediately
+tried, but waits for the host's retry time to arrive. If the retry_defer log
+selector is set, the message "retry time not reached" is written to the main
+log whenever a delivery is skipped for this reason. Section 49.2 contains more
+details of the handling of errors during remote deliveries.
+
+Retry processing applies to routing as well as to delivering, except as covered
+in the next paragraph. The retry rules do not distinguish between these
+actions. It is not possible, for example, to specify different behaviour for
+failures to route the domain snark.fict.example and failures to deliver to the
+host snark.fict.example. I didn't think anyone would ever need this added
+complication, so did not implement it. However, although they share the same
+retry rule, the actual retry times for routing and transporting a given domain
+are maintained independently.
+
+When a delivery is not part of a queue run (typically an immediate delivery on
+receipt of a message), the routers are always run, and local deliveries are
+always attempted, even if retry times are set for them. This makes for better
+behaviour if one particular message is causing problems (for example, causing
+quota overflow, or provoking an error in a filter file). If such a delivery
+suffers a temporary failure, the retry data is updated as normal, and
+subsequent delivery attempts from queue runs occur only when the retry time for
+the local address is reached.
+
+
+32.1 Changing retry rules
+-------------------------
+
+If you change the retry rules in your configuration, you should consider
+whether or not to delete the retry data that is stored in Exim's spool area in
+files with names like db/retry. Deleting any of Exim's hints files is always
+safe; that is why they are called "hints".
+
+The hints retry data contains suggested retry times based on the previous
+rules. In the case of a long-running problem with a remote host, it might
+record the fact that the host has timed out. If your new rules increase the
+timeout time for such a host, you should definitely remove the old retry data
+and let Exim recreate it, based on the new rules. Otherwise Exim might bounce
+messages that it should now be retaining.
+
+
+32.2 Format of retry rules
+--------------------------
+
+Each retry rule occupies one line and consists of three or four parts,
+separated by white space: a pattern, an error name, an optional list of sender
+addresses, and a list of retry parameters. The pattern and sender lists must be
+enclosed in double quotes if they contain white space. The rules are searched
+in order until one is found where the pattern, error name, and sender list (if
+present) match the failing host or address, the error that occurred, and the
+message's sender, respectively.
+
+The pattern is any single item that may appear in an address list (see section
+10.20). It is in fact processed as a one-item address list, which means that it
+is expanded before being tested against the address that has been delayed. A
+negated address list item is permitted. Address list processing treats a plain
+domain name as if it were preceded by "*@", which makes it possible for many
+retry rules to start with just a domain. For example,
+
+lookingglass.fict.example        *  F,24h,30m;
+
+provides a rule for any address in the lookingglass.fict.example domain,
+whereas
+
+alice@lookingglass.fict.example  *  F,24h,30m;
+
+applies only to temporary failures involving the local part alice. In practice,
+almost all rules start with a domain name pattern without a local part.
+
+Warning: If you use a regular expression in a retry rule pattern, it must match
+a complete address, not just a domain, because that is how regular expressions
+work in address lists.
+
+^\Nxyz\d+\.abc\.example$\N        *  G,1h,10m,2     Wrong
+^\N[^@]+@xyz\d+\.abc\.example$\N  *  G,1h,10m,2     Right
+
+
+32.3 Choosing which retry rule to use for address errors
+--------------------------------------------------------
+
+When Exim is looking for a retry rule after a routing attempt has failed (for
+example, after a DNS timeout), each line in the retry configuration is tested
+against the complete address only if retry_use_local_part is set for the
+router. Otherwise, only the domain is used, except when matching against a
+regular expression, when the local part of the address is replaced with "*". A
+domain on its own can match a domain pattern, or a pattern that starts with
+"*@". By default, retry_use_local_part is true for routers where 
+check_local_user is true, and false for other routers.
+
+Similarly, when Exim is looking for a retry rule after a local delivery has
+failed (for example, after a mailbox full error), each line in the retry
+configuration is tested against the complete address only if 
+retry_use_local_part is set for the transport (it defaults true for all local
+transports).
+
+However, when Exim is looking for a retry rule after a remote delivery attempt
+suffers an address error (a 4xx SMTP response for a recipient address), the
+whole address is always used as the key when searching the retry rules. The
+rule that is found is used to create a retry time for the combination of the
+failing address and the message's sender. It is the combination of sender and
+recipient that is delayed in subsequent queue runs until its retry time is
+reached. You can delay the recipient without regard to the sender by setting 
+address_retry_include_sender false in the smtp transport but this can lead to
+problems with servers that regularly issue 4xx responses to RCPT commands.
+
+
+32.4 Choosing which retry rule to use for host and message errors
+-----------------------------------------------------------------
+
+For a temporary error that is not related to an individual address (for
+example, a connection timeout), each line in the retry configuration is checked
+twice. First, the name of the remote host is used as a domain name (preceded by
+"*@" when matching a regular expression). If this does not match the line, the
+domain from the email address is tried in a similar fashion. For example,
+suppose the MX records for a.b.c.example are
+
+a.b.c.example  MX  5  x.y.z.example
+               MX  6  p.q.r.example
+               MX  7  m.n.o.example
+
+and the retry rules are
+
+p.q.r.example    *      F,24h,30m;
+a.b.c.example    *      F,4d,45m;
+
+and a delivery to the host x.y.z.example suffers a connection failure. The
+first rule matches neither the host nor the domain, so Exim looks at the second
+rule. This does not match the host, but it does match the domain, so it is used
+to calculate the retry time for the host x.y.z.example. Meanwhile, Exim tries
+to deliver to p.q.r.example. If this also suffers a host error, the first retry
+rule is used, because it matches the host.
+
+In other words, temporary failures to deliver to host p.q.r.example use the
+first rule to determine retry times, but for all the other hosts for the domain
+a.b.c.example, the second rule is used. The second rule is also used if routing
+to a.b.c.example suffers a temporary failure.
+
+Note: The host name is used when matching the patterns, not its IP address.
+However, if a message is routed directly to an IP address without the use of a
+host name, for example, if a manualroute router contains a setting such as:
+
+route_list = *.a.example  192.168.34.23
+
+then the "host name" that is used when searching for a retry rule is the
+textual form of the IP address.
+
+
+32.5 Retry rules for specific errors
+------------------------------------
+
+The second field in a retry rule is the name of a particular error, or an
+asterisk, which matches any error. The errors that can be tested for are:
+
+auth_failed
+
+    Authentication failed when trying to send to a host in the 
+    hosts_require_auth list in an smtp transport.
+
+data_4xx
+
+    A 4xx error was received for an outgoing DATA command, either immediately
+    after the command, or after sending the message's data.
+
+mail_4xx
+
+    A 4xx error was received for an outgoing MAIL command.
+
+rcpt_4xx
+
+    A 4xx error was received for an outgoing RCPT command.
+
+For the three 4xx errors, either the first or both of the x's can be given as
+specific digits, for example: "mail_45x" or "rcpt_436". For example, to
+recognize 452 errors given to RCPT commands for addresses in a certain domain,
+and have retries every ten minutes with a one-hour timeout, you could set up a
+retry rule of this form:
+
+the.domain.name  rcpt_452   F,1h,10m
+
+These errors apply to both outgoing SMTP (the smtp transport) and outgoing LMTP
+(either the lmtp transport, or the smtp transport in LMTP mode).
+
+lost_connection
+
+    A server unexpectedly closed the SMTP connection. There may, of course,
+    legitimate reasons for this (host died, network died), but if it repeats a
+    lot for the same host, it indicates something odd.
+
+lookup
+
+    A DNS lookup for a host failed. Note that a dnslookup router will need to
+    have matched its fail_defer_domains option for this retry type to be
+    usable. Also note that a manualroute router will probably need its 
+    host_find_failed option set to defer.
+
+refused_MX
+
+    A connection to a host obtained from an MX record was refused.
+
+refused_A
+
+    A connection to a host not obtained from an MX record was refused.
+
+refused
+
+    A connection was refused.
+
+timeout_connect_MX
+
+    A connection attempt to a host obtained from an MX record timed out.
+
+timeout_connect_A
+
+    A connection attempt to a host not obtained from an MX record timed out.
+
+timeout_connect
+
+    A connection attempt timed out.
+
+timeout_MX
+
+    There was a timeout while connecting or during an SMTP session with a host
+    obtained from an MX record.
+
+timeout_A
+
+    There was a timeout while connecting or during an SMTP session with a host
+    not obtained from an MX record.
+
+timeout
+
+    There was a timeout while connecting or during an SMTP session.
+
+tls_required
+
+    The server was required to use TLS (it matched hosts_require_tls in the 
+    smtp transport), but either did not offer TLS, or it responded with 4xx to
+    STARTTLS, or there was a problem setting up the TLS connection.
+
+quota
+
+    A mailbox quota was exceeded in a local delivery by the appendfile
+    transport.
+
+quota_<time>
+
+    A mailbox quota was exceeded in a local delivery by the appendfile
+    transport, and the mailbox has not been accessed for <time>. For example, 
+    quota_4d applies to a quota error when the mailbox has not been accessed
+    for four days.
+
+The idea of quota_<time> is to make it possible to have shorter timeouts when
+the mailbox is full and is not being read by its owner. Ideally, it should be
+based on the last time that the user accessed the mailbox. However, it is not
+always possible to determine this. Exim uses the following heuristic rules:
+
+  * If the mailbox is a single file, the time of last access (the "atime") is
+    used. As no new messages are being delivered (because the mailbox is over
+    quota), Exim does not access the file, so this is the time of last user
+    access.
+
+  * For a maildir delivery, the time of last modification of the new
+    subdirectory is used. As the mailbox is over quota, no new files are
+    created in the new subdirectory, because no new messages are being
+    delivered. Any change to the new subdirectory is therefore assumed to be
+    the result of an MUA moving a new message to the cur directory when it is
+    first read. The time that is used is therefore the last time that the user
+    read a new message.
+
+  * For other kinds of multi-file mailbox, the time of last access cannot be
+    obtained, so a retry rule that uses this type of error field is never
+    matched.
+
+The quota errors apply both to system-enforced quotas and to Exim's own quota
+mechanism in the appendfile transport. The quota error also applies when a
+local delivery is deferred because a partition is full (the ENOSPC error).
+
+
+32.6 Retry rules for specified senders
+--------------------------------------
+
+You can specify retry rules that apply only when the failing message has a
+specific sender. In particular, this can be used to define retry rules that
+apply only to bounce messages. The third item in a retry rule can be of this
+form:
+
+senders=<address list>
+
+The retry timings themselves are then the fourth item. For example:
+
+*   rcpt_4xx   senders=:   F,1h,30m
+
+matches recipient 4xx errors for bounce messages sent to any address at any
+host. If the address list contains white space, it must be enclosed in quotes.
+For example:
+
+a.domain  rcpt_452  senders="xb.dom : yc.dom"  G,8h,10m,1.5
+
+Warning: This facility can be unhelpful if it is used for host errors (which do
+not depend on the recipient). The reason is that the sender is used only to
+match the retry rule. Once the rule has been found for a host error, its
+contents are used to set a retry time for the host, and this will apply to all
+messages, not just those with specific senders.
+
+When testing retry rules using -brt, you can supply a sender using the -f
+command line option, like this:
+
+exim -f "" -brt user@dom.ain
+
+If you do not set -f with -brt, a retry rule that contains a senders list is
+never matched.
+
+
+32.7 Retry parameters
+---------------------
+
+The third (or fourth, if a senders list is present) field in a retry rule is a
+sequence of retry parameter sets, separated by semicolons. Each set consists of
+
+<letter>,<cutoff time>,<arguments>
+
+The letter identifies the algorithm for computing a new retry time; the cutoff
+time is the time beyond which this algorithm no longer applies, and the
+arguments vary the algorithm's action. The cutoff time is measured from the
+time that the first failure for the domain (combined with the local part if
+relevant) was detected, not from the time the message was received.
+
+The available algorithms are:
+
+  * F: retry at fixed intervals. There is a single time parameter specifying
+    the interval.
+
+  * G: retry at geometrically increasing intervals. The first argument
+    specifies a starting value for the interval, and the second a multiplier,
+    which is used to increase the size of the interval at each retry.
+
+  * H: retry at randomized intervals. The arguments are as for G. For each
+    retry, the previous interval is multiplied by the factor in order to get a
+    maximum for the next interval. The minimum interval is the first argument
+    of the parameter, and an actual interval is chosen randomly between them.
+    Such a rule has been found to be helpful in cluster configurations when all
+    the members of the cluster restart at once, and may therefore synchronize
+    their queue processing times.
+
+When computing the next retry time, the algorithm definitions are scanned in
+order until one whose cutoff time has not yet passed is reached. This is then
+used to compute a new retry time that is later than the current time. In the
+case of fixed interval retries, this simply means adding the interval to the
+current time. For geometrically increasing intervals, retry intervals are
+computed from the rule's parameters until one that is greater than the previous
+interval is found. The main configuration variable retry_interval_max limits
+the maximum interval between retries. It cannot be set greater than "24h",
+which is its default value.
+
+A single remote domain may have a number of hosts associated with it, and each
+host may have more than one IP address. Retry algorithms are selected on the
+basis of the domain name, but are applied to each IP address independently. If,
+for example, a host has two IP addresses and one is unusable, Exim will
+generate retry times for it and will not try to use it until its next retry
+time comes. Thus the good IP address is likely to be tried first most of the
+time.
+
+Retry times are hints rather than promises. Exim does not make any attempt to
+run deliveries exactly at the computed times. Instead, a queue runner process
+starts delivery processes for delayed messages periodically, and these attempt
+new deliveries only for those addresses that have passed their next retry time.
+If a new message arrives for a deferred address, an immediate delivery attempt
+occurs only if the address has passed its retry time. In the absence of new
+messages, the minimum time between retries is the interval between queue runner
+processes. There is not much point in setting retry times of five minutes if
+your queue runners happen only once an hour, unless there are a significant
+number of incoming messages (which might be the case on a system that is
+sending everything to a smart host, for example).
+
+The data in the retry hints database can be inspected by using the exim_dumpdb
+or exim_fixdb utility programs (see chapter 54). The latter utility can also be
+used to change the data. The exinext utility script can be used to find out
+what the next retry times are for the hosts associated with a particular mail
+domain, and also for local deliveries that have been deferred.
+
+
+32.8 Retry rule examples
+------------------------
+
+Here are some example retry rules:
+
+alice@wonderland.fict.example quota_5d  F,7d,3h
+wonderland.fict.example       quota_5d
+wonderland.fict.example       *         F,1h,15m; G,2d,1h,2;
+lookingglass.fict.example     *         F,24h,30m;
+*                 refused_A   F,2h,20m;
+*                 *           F,2h,15m; G,16h,1h,1.5; F,5d,8h
+
+The first rule sets up special handling for mail to 
+alice@wonderland.fict.example when there is an over-quota error and the mailbox
+has not been read for at least 5 days. Retries continue every three hours for 7
+days. The second rule handles over-quota errors for all other local parts at 
+wonderland.fict.example; the absence of a local part has the same effect as
+supplying "*@". As no retry algorithms are supplied, messages that fail are
+bounced immediately if the mailbox has not been read for at least 5 days.
+
+The third rule handles all other errors at wonderland.fict.example; retries
+happen every 15 minutes for an hour, then with geometrically increasing
+intervals until two days have passed since a delivery first failed. After the
+first hour there is a delay of one hour, then two hours, then four hours, and
+so on (this is a rather extreme example).
+
+The fourth rule controls retries for the domain lookingglass.fict.example. They
+happen every 30 minutes for 24 hours only. The remaining two rules handle all
+other domains, with special action for connection refusal from hosts that were
+not obtained from an MX record.
+
+The final rule in a retry configuration should always have asterisks in the
+first two fields so as to provide a general catch-all for any addresses that do
+not have their own special handling. This example tries every 15 minutes for 2
+hours, then with intervals starting at one hour and increasing by a factor of
+1.5 up to 16 hours, then every 8 hours up to 5 days.
+
+
+32.9 Timeout of retry data
+--------------------------
+
+Exim timestamps the data that it writes to its retry hints database. When it
+consults the data during a delivery it ignores any that is older than the value
+set in retry_data_expire (default 7 days). If, for example, a host hasn't been
+tried for 7 days, Exim will try to deliver to it immediately a message arrives,
+and if that fails, it will calculate a retry time as if it were failing for the
+first time.
+
+This improves the behaviour for messages routed to rarely-used hosts such as MX
+backups. If such a host was down at one time, and happens to be down again when
+Exim tries a month later, using the old retry data would imply that it had been
+down all the time, which is not a justified assumption.
+
+If a host really is permanently dead, this behaviour causes a burst of retries
+every now and again, but only if messages routed to it are rare. If there is a
+message at least once every 7 days the retry data never expires.
+
+
+32.10 Long-term failures
+------------------------
+
+Special processing happens when an email address has been failing for so long
+that the cutoff time for the last algorithm is reached. For example, using the
+default retry rule:
+
+* * F,2h,15m; G,16h,1h,1.5; F,4d,6h
+
+the cutoff time is four days. Reaching the retry cutoff is independent of how
+long any specific message has been failing; it is the length of continuous
+failure for the recipient address that counts.
+
+When the cutoff time is reached for a local delivery, or for all the IP
+addresses associated with a remote delivery, a subsequent delivery failure
+causes Exim to give up on the address, and a bounce message is generated. In
+order to cater for new messages that use the failing address, a next retry time
+is still computed from the final algorithm, and is used as follows:
+
+For local deliveries, one delivery attempt is always made for any subsequent
+messages. If this delivery fails, the address fails immediately. The
+post-cutoff retry time is not used.
+
+If the delivery is remote, there are two possibilities, controlled by the 
+delay_after_cutoff option of the smtp transport. The option is true by default.
+Until the post-cutoff retry time for one of the IP addresses, as set by the 
+retry_data_expire option, is reached, the failing email address is bounced
+immediately, without a delivery attempt taking place. After that time, one new
+delivery attempt is made to those IP addresses that are past their retry times,
+and if that still fails, the address is bounced and new retry times are
+computed.
+
+In other words, when all the hosts for a given email address have been failing
+for a long time, Exim bounces rather then defers until one of the hosts' retry
+times is reached. Then it tries once, and bounces if that attempt fails. This
+behaviour ensures that few resources are wasted in repeatedly trying to deliver
+to a broken destination, but if the host does recover, Exim will eventually
+notice.
+
+If delay_after_cutoff is set false, Exim behaves differently. If all IP
+addresses are past their final cutoff time, Exim tries to deliver to those IP
+addresses that have not been tried since the message arrived. If there are no
+suitable IP addresses, or if they all fail, the address is bounced. In other
+words, it does not delay when a new message arrives, but tries the expired
+addresses immediately, unless they have been tried since the message arrived.
+If there is a continuous stream of messages for the failing domains, setting 
+delay_after_cutoff false means that there will be many more attempts to deliver
+to permanently failing IP addresses than when delay_after_cutoff is true.
+
+
+32.11 Deliveries that work intermittently
+-----------------------------------------
+
+Some additional logic is needed to cope with cases where a host is
+intermittently available, or when a message has some attribute that prevents
+its delivery when others to the same address get through. In this situation,
+because some messages are successfully delivered, the "retry clock" for the
+host or address keeps getting reset by the successful deliveries, and so
+failing messages remain in the queue for ever because the cutoff time is never
+reached.
+
+Two exceptional actions are applied to prevent this happening. The first
+applies to errors that are related to a message rather than a remote host.
+Section 49.2 has a discussion of the different kinds of error; examples of
+message-related errors are 4xx responses to MAIL or DATA commands, and quota
+failures. For this type of error, if a message's arrival time is earlier than
+the "first failed" time for the error, the earlier time is used when scanning
+the retry rules to decide when to try next and when to time out the address.
+
+The exceptional second action applies in all cases. If a message has been on
+the queue for longer than the cutoff time of any applicable retry rule for a
+given address, a delivery is attempted for that address, even if it is not yet
+time, and if this delivery fails, the address is timed out. A new retry time is
+not computed in this case, so that other messages for the same address are
+considered immediately.
+
+
+
+===============================================================================
+33. SMTP AUTHENTICATION
+
+The "authenticators" section of Exim's runtime configuration is concerned with
+SMTP authentication. This facility is an extension to the SMTP protocol,
+described in RFC 2554, which allows a client SMTP host to authenticate itself
+to a server. This is a common way for a server to recognize clients that are
+permitted to use it as a relay. SMTP authentication is not of relevance to the
+transfer of mail between servers that have no managerial connection with each
+other.
+
+The name of an authenticator is limited to be 64 ASCII characters long; prior
+to Exim 4.95 names would be silently truncated at this length, but now it is
+enforced.
+
+Very briefly, the way SMTP authentication works is as follows:
+
+  * The server advertises a number of authentication mechanisms in response to
+    the client's EHLO command.
+
+  * The client issues an AUTH command, naming a specific mechanism. The command
+    may, optionally, contain some authentication data.
+
+  * The server may issue one or more challenges, to which the client must send
+    appropriate responses. In simple authentication mechanisms, the challenges
+    are just prompts for user names and passwords. The server does not have to
+    issue any challenges - in some mechanisms the relevant data may all be
+    transmitted with the AUTH command.
+
+  * The server either accepts or denies authentication.
+
+  * If authentication succeeds, the client may optionally make use of the AUTH
+    option on the MAIL command to pass an authenticated sender in subsequent
+    mail transactions. Authentication lasts for the remainder of the SMTP
+    connection.
+
+  * If authentication fails, the client may give up, or it may try a different
+    authentication mechanism, or it may try transferring mail over the
+    unauthenticated connection.
+
+If you are setting up a client, and want to know which authentication
+mechanisms the server supports, you can use Telnet to connect to port 25 (the
+SMTP port) on the server, and issue an EHLO command. The response to this
+includes the list of supported mechanisms. For example:
+
+$ telnet server.example 25
+Trying 192.168.34.25...
+Connected to server.example.
+Escape character is '^]'.
+220 server.example ESMTP Exim 4.20 ...
+ehlo client.example
+250-server.example Hello client.example [10.8.4.5]
+250-SIZE 52428800
+250-PIPELINING
+250-AUTH PLAIN
+250 HELP
+
+The second-last line of this example output shows that the server supports
+authentication using the PLAIN mechanism. In Exim, the different authentication
+mechanisms are configured by specifying authenticator drivers. Like the routers
+and transports, which authenticators are included in the binary is controlled
+by build-time definitions. The following are currently available, included by
+setting
+
+AUTH_CRAM_MD5=yes
+AUTH_CYRUS_SASL=yes
+AUTH_DOVECOT=yes
+AUTH_EXTERNAL=yes
+AUTH_GSASL=yes
+AUTH_HEIMDAL_GSSAPI=yes
+AUTH_PLAINTEXT=yes
+AUTH_SPA=yes
+AUTH_TLS=yes
+
+in Local/Makefile, respectively. The first of these supports the CRAM-MD5
+authentication mechanism (RFC 2195), and the second provides an interface to
+the Cyrus SASL authentication library. The third is an interface to Dovecot's
+authentication system, delegating the work via a socket interface. The fourth
+provides for negotiation of authentication done via non-SMTP means, as defined
+by RFC 4422 Appendix A. The fifth provides an interface to the GNU SASL
+authentication library, which provides mechanisms but typically not data
+sources. The sixth provides direct access to Heimdal GSSAPI, geared for
+Kerberos, but supporting setting a server keytab. The seventh can be configured
+to support the PLAIN authentication mechanism (RFC 2595) or the LOGIN
+mechanism, which is not formally documented, but used by several MUAs. The
+eighth authenticator supports Microsoft's Secure Password Authentication
+mechanism. The last is an Exim authenticator but not an SMTP one; instead it
+can use information from a TLS negotiation.
+
+The authenticators are configured using the same syntax as other drivers (see
+section 6.23). If no authenticators are required, no authentication section
+need be present in the configuration file. Each authenticator can in principle
+have both server and client functions. When Exim is receiving SMTP mail, it is
+acting as a server; when it is sending out messages over SMTP, it is acting as
+a client. Authenticator configuration options are provided for use in both
+these circumstances.
+
+To make it clear which options apply to which situation, the prefixes server_
+and client_ are used on option names that are specific to either the server or
+the client function, respectively. Server and client functions are disabled if
+none of their options are set. If an authenticator is to be used for both
+server and client functions, a single definition, using both sets of options,
+is required. For example:
+
+cram:
+  driver = cram_md5
+  public_name = CRAM-MD5
+  server_secret = ${if eq{$auth1}{ph10}{secret1}fail}
+  client_name = ph10
+  client_secret = secret2
+
+The server_ option is used when Exim is acting as a server, and the client_
+options when it is acting as a client.
+
+Descriptions of the individual authenticators are given in subsequent chapters.
+The remainder of this chapter covers the generic options for the
+authenticators, followed by general discussion of the way authentication works
+in Exim.
+
+Beware: the meaning of $auth1, $auth2, ... varies on a per-driver and
+per-mechanism basis. Please read carefully to determine which variables hold
+account labels such as usercodes and which hold passwords or other
+authenticating data.
+
+Note that some mechanisms support two different identifiers for accounts: the 
+authentication id and the authorization id. The contractions authn and authz
+are commonly encountered. The American spelling is standard here. Conceptually,
+authentication data such as passwords are tied to the identifier used to
+authenticate; servers may have rules to permit one user to act as a second
+user, so that after login the session is treated as though that second user had
+logged in. That second user is the authorization id. A robust configuration
+might confirm that the authz field is empty or matches the authn field. Often
+this is just ignored. The authn can be considered as verified data, the authz
+as an unverified request which the server might choose to honour.
+
+A realm is a text string, typically a domain name, presented by a server to a
+client to help it select an account and credentials to use. In some mechanisms,
+the client and server provably agree on the realm, but clients typically can
+not treat the realm as secure data to be blindly trusted.
+
+
+33.1 Generic options for authenticators
+---------------------------------------
+
++-----------------------------------------------------------------+
+|client_condition|Use: authenticators|Type: string*|Default: unset|
++-----------------------------------------------------------------+
+
+When Exim is authenticating as a client, it skips any authenticator whose 
+client_condition expansion yields "0", "no", or "false". This can be used, for
+example, to skip plain text authenticators when the connection is not encrypted
+by a setting such as:
+
+client_condition = ${if !eq{$tls_out_cipher}{}}
+
++--------------------------------------------------------------+
+|client_set_id|Use: authenticators|Type: string*|Default: unset|
++--------------------------------------------------------------+
+
+When client authentication succeeds, this condition is expanded; the result is
+used in the log lines for outbound messages. Typically it will be the user name
+used for authentication.
+
++------------------------------------------------------+
+|driver|Use: authenticators|Type: string|Default: unset|
++------------------------------------------------------+
+
+This option must always be set. It specifies which of the available
+authenticators is to be used.
+
++-----------------------------------------------------------+
+|public_name|Use: authenticators|Type: string|Default: unset|
++-----------------------------------------------------------+
+
+This option specifies the name of the authentication mechanism that the driver
+implements, and by which it is known to the outside world. These names should
+contain only upper case letters, digits, underscores, and hyphens (RFC 2222),
+but Exim in fact matches them caselessly. If public_name is not set, it
+defaults to the driver's instance name.
+
++---------------------------------------------------------------------------+
+|server_advertise_condition|Use: authenticators|Type: string*|Default: unset|
++---------------------------------------------------------------------------+
+
+When a server is about to advertise an authentication mechanism, the condition
+is expanded. If it yields the empty string, "0", "no", or "false", the
+mechanism is not advertised. If the expansion fails, the mechanism is not
+advertised. If the failure was not forced, and was not caused by a lookup
+defer, the incident is logged. See section 33.3 below for further discussion.
+
++-----------------------------------------------------------------+
+|server_condition|Use: authenticators|Type: string*|Default: unset|
++-----------------------------------------------------------------+
+
+This option must be set for a plaintext server authenticator, where it is used
+directly to control authentication. See section 34.3 for details.
+
+For the gsasl authenticator, this option is required for various mechanisms;
+see chapter 38 for details.
+
+For the other authenticators, server_condition can be used as an additional
+authentication or authorization mechanism that is applied after the other
+authenticator conditions succeed. If it is set, it is expanded when the
+authenticator would otherwise return a success code. If the expansion is forced
+to fail, authentication fails. Any other expansion failure causes a temporary
+error code to be returned. If the result of a successful expansion is an empty
+string, "0", "no", or "false", authentication fails. If the result of the
+expansion is "1", "yes", or "true", authentication succeeds. For any other
+result, a temporary error code is returned, with the expanded string as the
+error text.
+
++-------------------------------------------------------------------+
+|server_debug_print|Use: authenticators|Type: string*|Default: unset|
++-------------------------------------------------------------------+
+
+If this option is set and authentication debugging is enabled (see the -d
+command line option), the string is expanded and included in the debugging
+output when the authenticator is run as a server. This can help with checking
+out the values of variables. If expansion of the string fails, the error
+message is written to the debugging output, and Exim carries on processing.
+
++--------------------------------------------------------------+
+|server_set_id|Use: authenticators|Type: string*|Default: unset|
++--------------------------------------------------------------+
+
+When an Exim server successfully authenticates a client, this string is
+expanded using data from the authentication, and preserved for any incoming
+messages in the variable $authenticated_id. It is also included in the log
+lines for incoming messages. For example, a user/password authenticator
+configuration might preserve the user name that was used to authenticate, and
+refer to it subsequently during delivery of the message. On a failing
+authentication the expansion result is instead saved in the
+$authenticated_fail_id variable. If expansion fails, the option is ignored.
+
++---------------------------------------------------------------------------+
+|server_mail_auth_condition|Use: authenticators|Type: string*|Default: unset|
++---------------------------------------------------------------------------+
+
+This option allows a server to discard authenticated sender addresses supplied
+as part of MAIL commands in SMTP connections that are authenticated by the
+driver on which server_mail_auth_condition is set. The option is not used as
+part of the authentication process; instead its (unexpanded) value is
+remembered for later use. How it is used is described in the following section.
+
+
+33.2 The AUTH parameter on MAIL commands
+----------------------------------------
+
+When a client supplied an AUTH= item on a MAIL command, Exim applies the
+following checks before accepting it as the authenticated sender of the
+message:
+
+  * If the connection is not using extended SMTP (that is, HELO was used rather
+    than EHLO), the use of AUTH= is a syntax error.
+
+  * If the value of the AUTH= parameter is "<>", it is ignored.
+
+  * If acl_smtp_mailauth is defined, the ACL it specifies is run. While it is
+    running, the value of $authenticated_sender is set to the value obtained
+    from the AUTH= parameter. If the ACL does not yield "accept", the value of
+    $authenticated_sender is deleted. The acl_smtp_mailauth ACL may not return
+    "drop" or "discard". If it defers, a temporary error code (451) is given
+    for the MAIL command.
+
+  * If acl_smtp_mailauth is not defined, the value of the AUTH= parameter is
+    accepted and placed in $authenticated_sender only if the client has
+    authenticated.
+
+  * If the AUTH= value was accepted by either of the two previous rules, and
+    the client has authenticated, and the authenticator has a setting for the 
+    server_mail_auth_condition, the condition is checked at this point. The
+    valued that was saved from the authenticator is expanded. If the expansion
+    fails, or yields an empty string, "0", "no", or "false", the value of
+    $authenticated_sender is deleted. If the expansion yields any other value,
+    the value of $authenticated_sender is retained and passed on with the
+    message.
+
+When $authenticated_sender is set for a message, it is passed on to other hosts
+to which Exim authenticates as a client. Do not confuse this value with
+$authenticated_id, which is a string obtained from the authentication process,
+and which is not usually a complete email address.
+
+Whenever an AUTH= value is ignored, the incident is logged. The ACL for MAIL,
+if defined, is run after AUTH= is accepted or ignored. It can therefore make
+use of $authenticated_sender. The converse is not true: the value of
+$sender_address is not yet set up when the acl_smtp_mailauth ACL is run.
+
+
+33.3 Authentication on an Exim server
+-------------------------------------
+
+When Exim receives an EHLO command, it advertises the public names of those
+authenticators that are configured as servers, subject to the following
+conditions:
+
+  * The client host must match auth_advertise_hosts (default *).
+
+  * If the server_advertise_condition option is set, its expansion must not
+    yield the empty string, "0", "no", or "false".
+
+The order in which the authenticators are defined controls the order in which
+the mechanisms are advertised.
+
+Some mail clients (for example, some versions of Netscape) require the user to
+provide a name and password for authentication whenever AUTH is advertised,
+even though authentication may not in fact be needed (for example, Exim may be
+set up to allow unconditional relaying from the client by an IP address check).
+You can make such clients more friendly by not advertising AUTH to them. For
+example, if clients on the 10.9.8.0/24 network are permitted (by the ACL that
+runs for RCPT) to relay without authentication, you should set
+
+auth_advertise_hosts = ! 10.9.8.0/24
+
+so that no authentication mechanisms are advertised to them.
+
+The server_advertise_condition controls the advertisement of individual
+authentication mechanisms. For example, it can be used to restrict the
+advertisement of a particular mechanism to encrypted connections, by a setting
+such as:
+
+server_advertise_condition = ${if eq{$tls_in_cipher}{}{no}{yes}}
+
+If the session is encrypted, $tls_in_cipher is not empty, and so the expansion
+yields "yes", which allows the advertisement to happen.
+
+When an Exim server receives an AUTH command from a client, it rejects it
+immediately if AUTH was not advertised in response to an earlier EHLO command.
+This is the case if
+
+  * The client host does not match auth_advertise_hosts; or
+
+  * No authenticators are configured with server options; or
+
+  * Expansion of server_advertise_condition blocked the advertising of all the
+    server authenticators.
+
+Otherwise, Exim runs the ACL specified by acl_smtp_auth in order to decide
+whether to accept the command. If acl_smtp_auth is not set, AUTH is accepted
+from any client host.
+
+If AUTH is not rejected by the ACL, Exim searches its configuration for a
+server authentication mechanism that was advertised in response to EHLO and
+that matches the one named in the AUTH command. If it finds one, it runs the
+appropriate authentication protocol, and authentication either succeeds or
+fails. If there is no matching advertised mechanism, the AUTH command is
+rejected with a 504 error.
+
+When a message is received from an authenticated host, the value of
+$received_protocol is set to "esmtpa" or "esmtpsa" instead of "esmtp" or
+"esmtps", and $sender_host_authenticated contains the name (not the public
+name) of the authenticator driver that successfully authenticated the client
+from which the message was received. This variable is empty if there was no
+successful authentication.
+
+Successful authentication sets up information used by the authresults expansion
+item.
+
+
+33.4 Testing server authentication
+----------------------------------
+
+Exim's -bh option can be useful for testing server authentication
+configurations. The data for the AUTH command has to be sent using base64
+encoding. A quick way to produce such data for testing is the following Perl
+script:
+
+use MIME::Base64;
+printf ("%s", encode_base64(eval "\"$ARGV[0]\""));
+
+This interprets its argument as a Perl string, and then encodes it. The
+interpretation as a Perl string allows binary zeros, which are required for
+some kinds of authentication, to be included in the data. For example, a
+command line to run this script on such data might be
+
+encode '\0user\0password'
+
+Note the use of single quotes to prevent the shell interpreting the
+backslashes, so that they can be interpreted by Perl to specify characters
+whose code value is zero.
+
+Warning 1: If either of the user or password strings starts with an octal
+digit, you must use three zeros instead of one after the leading backslash. If
+you do not, the octal digit that starts your string will be incorrectly
+interpreted as part of the code for the first character.
+
+Warning 2: If there are characters in the strings that Perl interprets
+specially, you must use a Perl escape to prevent them being misinterpreted. For
+example, a command such as
+
+encode '\0user@domain.com\0pas$$word'
+
+gives an incorrect answer because of the unescaped "@" and "$" characters.
+
+If you have the mimencode command installed, another way to produce
+base64-encoded strings is to run the command
+
+echo -e -n `\0user\0password' | mimencode
+
+The -e option of echo enables the interpretation of backslash escapes in the
+argument, and the -n option specifies no newline at the end of its output.
+However, not all versions of echo recognize these options, so you should check
+your version before relying on this suggestion.
+
+
+33.5 Authentication by an Exim client
+-------------------------------------
+
+The smtp transport has two options called hosts_require_auth and hosts_try_auth
+. When the smtp transport connects to a server that announces support for
+authentication, and the host matches an entry in either of these options, Exim
+(as a client) tries to authenticate as follows:
+
+  * For each authenticator that is configured as a client, in the order in
+    which they are defined in the configuration, it searches the authentication
+    mechanisms announced by the server for one whose name matches the public
+    name of the authenticator.
+
+  * When it finds one that matches, it runs the authenticator's client code.
+    The variables $host and $host_address are available for any string
+    expansions that the client might do. They are set to the server's name and
+    IP address. If any expansion is forced to fail, the authentication attempt
+    is abandoned, and Exim moves on to the next authenticator. Otherwise an
+    expansion failure causes delivery to be deferred.
+
+  * If the result of the authentication attempt is a temporary error or a
+    timeout, Exim abandons trying to send the message to the host for the
+    moment. It will try again later. If there are any backup hosts available,
+    they are tried in the usual way.
+
+  * If the response to authentication is a permanent error (5xx code), Exim
+    carries on searching the list of authenticators and tries another one if
+    possible. If all authentication attempts give permanent errors, or if there
+    are no attempts because no mechanisms match (or option expansions force
+    failure), what happens depends on whether the host matches 
+    hosts_require_auth or hosts_try_auth. In the first case, a temporary error
+    is generated, and delivery is deferred. The error can be detected in the
+    retry rules, and thereby turned into a permanent error if you wish. In the
+    second case, Exim tries to deliver the message unauthenticated.
+
+Note that the hostlist test for whether to do authentication can be confused if
+name-IP lookups change between the time the peer is decided upon and the time
+that the transport runs. For example, with a manualroute router given a host
+name, and with DNS "round-robin" used by that name: if the local resolver cache
+times out between the router and the transport running, the transport may get
+an IP for the name for its authentication check which does not match the
+connection peer IP. No authentication will then be done, despite the names
+being identical.
+
+For such cases use a separate transport which always authenticates.
+
+When Exim has authenticated itself to a remote server, it adds the AUTH
+parameter to the MAIL commands it sends, if it has an authenticated sender for
+the message. If the message came from a remote host, the authenticated sender
+is the one that was receiving on an incoming MAIL command, provided that the
+incoming connection was authenticated and the server_mail_auth condition
+allowed the authenticated sender to be retained. If a local process calls Exim
+to send a message, the sender address that is built from the login name and 
+qualify_domain is treated as authenticated. However, if the 
+authenticated_sender option is set on the smtp transport, it overrides the
+authenticated sender that was received with the message.
+
+
+
+===============================================================================
+34. THE PLAINTEXT AUTHENTICATOR
+
+The plaintext authenticator can be configured to support the PLAIN and LOGIN
+authentication mechanisms, both of which transfer authentication data as plain
+(unencrypted) text (though base64 encoded). The use of plain text is a security
+risk; you are strongly advised to insist on the use of SMTP encryption (see
+chapter 43) if you use the PLAIN or LOGIN mechanisms. If you do use unencrypted
+plain text, you should not use the same passwords for SMTP connections as you
+do for login accounts.
+
+
+34.1 Avoiding cleartext use
+---------------------------
+
+The following generic option settings will disable plaintext authenticators
+when TLS is not being used:
+
+  server_advertise_condition = ${if def:tls_in_cipher }
+  client_condition =           ${if def:tls_out_cipher}
+
+Note: a plaintext SMTP AUTH done inside TLS is not vulnerable to casual
+snooping, but is still vulnerable to a Man In The Middle attack unless
+certificates (including their names) have been properly verified.
+
+
+34.2 Plaintext server options
+-----------------------------
+
+When configured as a server, plaintext uses the following options:
+
++-----------------------------------------------------------------+
+|server_condition|Use: authenticators|Type: string*|Default: unset|
++-----------------------------------------------------------------+
+
+This is actually a global authentication option, but it must be set in order to
+configure the plaintext driver as a server. Its use is described below.
+
++---------------------------------------------------------------+
+|server_prompts|Use: plaintext|Type: string list*|Default: unset|
++---------------------------------------------------------------+
+
+The contents of this option, after expansion, must be a colon-separated list of
+prompt strings. If expansion fails, a temporary authentication rejection is
+given.
+
+
+34.3 Using plaintext in a server
+--------------------------------
+
+When running as a server, plaintext performs the authentication test by
+expanding a string. The data sent by the client with the AUTH command, or in
+response to subsequent prompts, is base64 encoded, and so may contain any byte
+values when decoded. If any data is supplied with the command, it is treated as
+a list of strings, separated by NULs (binary zeros), the first three of which
+are placed in the expansion variables $auth1, $auth2, and $auth3 (neither LOGIN
+nor PLAIN uses more than three strings).
+
+For compatibility with previous releases of Exim, the values are also placed in
+the expansion variables $1, $2, and $3. However, the use of these variables for
+this purpose is now deprecated, as it can lead to confusion in string
+expansions that also use them for other things.
+
+If there are more strings in server_prompts than the number of strings supplied
+with the AUTH command, the remaining prompts are used to obtain more data. Each
+response from the client may be a list of NUL-separated strings.
+
+Once a sufficient number of data strings have been received, server_condition
+is expanded. If the expansion is forced to fail, authentication fails. Any
+other expansion failure causes a temporary error code to be returned. If the
+result of a successful expansion is an empty string, "0", "no", or "false",
+authentication fails. If the result of the expansion is "1", "yes", or "true",
+authentication succeeds and the generic server_set_id option is expanded and
+saved in $authenticated_id. For any other result, a temporary error code is
+returned, with the expanded string as the error text.
+
+Warning: If you use a lookup in the expansion to find the user's password, be
+sure to make the authentication fail if the user is unknown. There are good and
+bad examples at the end of the next section.
+
+
+34.4 The PLAIN authentication mechanism
+---------------------------------------
+
+The PLAIN authentication mechanism (RFC 2595) specifies that three strings be
+sent as one item of data (that is, one combined string containing two NUL
+separators). The data is sent either as part of the AUTH command, or
+subsequently in response to an empty prompt from the server.
+
+The second and third strings are a user name and a corresponding password.
+Using a single fixed user name and password as an example, this could be
+configured as follows:
+
+fixed_plain:
+  driver = plaintext
+  public_name = PLAIN
+  server_prompts = :
+  server_condition = \
+    ${if and {{eq{$auth2}{username}}{eq{$auth3}{mysecret}}}}
+  server_set_id = $auth2
+
+Note that the default result strings from if ("true" or an empty string) are
+exactly what we want here, so they need not be specified. Obviously, if the
+password contains expansion-significant characters such as dollar, backslash,
+or closing brace, they have to be escaped.
+
+The server_prompts setting specifies a single, empty prompt (empty items at the
+end of a string list are ignored). If all the data comes as part of the AUTH
+command, as is commonly the case, the prompt is not used. This authenticator is
+advertised in the response to EHLO as
+
+250-AUTH PLAIN
+
+and a client host can authenticate itself by sending the command
+
+AUTH PLAIN AHVzZXJuYW1lAG15c2VjcmV0
+
+As this contains three strings (more than the number of prompts), no further
+data is required from the client. Alternatively, the client may just send
+
+AUTH PLAIN
+
+to initiate authentication, in which case the server replies with an empty
+prompt. The client must respond with the combined data string.
+
+The data string is base64 encoded, as required by the RFC. This example, when
+decoded, is <NUL>"username"<NUL>"mysecret", where <NUL> represents a zero byte.
+This is split up into three strings, the first of which is empty. The 
+server_condition option in the authenticator checks that the second two are
+"username" and "mysecret" respectively.
+
+Having just one fixed user name and password, as in this example, is not very
+realistic, though for a small organization with only a handful of
+authenticating clients it could make sense.
+
+A more sophisticated instance of this authenticator could use the user name in
+$auth2 to look up a password in a file or database, and maybe do an encrypted
+comparison (see crypteq in chapter 11). Here is a example of this approach,
+where the passwords are looked up in a DBM file. Warning: This is an incorrect
+example:
+
+server_condition = \
+  ${if eq{$auth3}{${lookup{$auth2}dbm{/etc/authpwd}}}}
+
+The expansion uses the user name ($auth2) as the key to look up a password,
+which it then compares to the supplied password ($auth3). Why is this example
+incorrect? It works fine for existing users, but consider what happens if a
+non-existent user name is given. The lookup fails, but as no success/failure
+strings are given for the lookup, it yields an empty string. Thus, to defeat
+the authentication, all a client has to do is to supply a non-existent user
+name and an empty password. The correct way of writing this test is:
+
+server_condition = ${lookup{$auth2}dbm{/etc/authpwd}\
+  {${if eq{$value}{$auth3}}} {false}}
+
+In this case, if the lookup succeeds, the result is checked; if the lookup
+fails, "false" is returned and authentication fails. If crypteq is being used
+instead of eq, the first example is in fact safe, because crypteq always fails
+if its second argument is empty. However, the second way of writing the test
+makes the logic clearer.
+
+
+34.5 The LOGIN authentication mechanism
+---------------------------------------
+
+The LOGIN authentication mechanism is not documented in any RFC, but is in use
+in a number of programs. No data is sent with the AUTH command. Instead, a user
+name and password are supplied separately, in response to prompts. The
+plaintext authenticator can be configured to support this as in this example:
+
+fixed_login:
+  driver = plaintext
+  public_name = LOGIN
+  server_prompts = User Name : Password
+  server_condition = \
+    ${if and {{eq{$auth1}{username}}{eq{$auth2}{mysecret}}}}
+  server_set_id = $auth1
+
+Because of the way plaintext operates, this authenticator accepts data supplied
+with the AUTH command (in contravention of the specification of LOGIN), but if
+the client does not supply it (as is the case for LOGIN clients), the prompt
+strings are used to obtain two data items.
+
+Some clients are very particular about the precise text of the prompts. For
+example, Outlook Express is reported to recognize only "Username:" and
+"Password:". Here is an example of a LOGIN authenticator that uses those
+strings. It uses the ldapauth expansion condition to check the user name and
+password by binding to an LDAP server:
+
+login:
+  driver = plaintext
+  public_name = LOGIN
+  server_prompts = Username:: : Password::
+  server_condition = ${if and{{ \
+    !eq{}{$auth1} }{ \
+    ldapauth{\
+      user="uid=${quote_ldap_dn:$auth1},ou=people,o=example.org" \
+      pass=${quote:$auth2} \
+      ldap://ldap.example.org/} }} }
+  server_set_id = uid=$auth1,ou=people,o=example.org
+
+We have to check that the username is not empty before using it, because LDAP
+does not permit empty DN components. We must also use the quote_ldap_dn
+operator to correctly quote the DN for authentication. However, the basic quote
+operator, rather than any of the LDAP quoting operators, is the correct one to
+use for the password, because quoting is needed only to make the password
+conform to the Exim syntax. At the LDAP level, the password is an uninterpreted
+string.
+
+
+34.6 Support for different kinds of authentication
+--------------------------------------------------
+
+A number of string expansion features are provided for the purpose of
+interfacing to different ways of user authentication. These include checking
+traditionally encrypted passwords from /etc/passwd (or equivalent), PAM,
+Radius, ldapauth, pwcheck, and saslauthd. For details see section 11.7.
+
+
+34.7 Using plaintext in a client
+--------------------------------
+
+The plaintext authenticator has two client options:
+
++------------------------------------------------------------------------+
+|client_ignore_invalid_base64|Use: plaintext|Type: boolean|Default: false|
++------------------------------------------------------------------------+
+
+If the client receives a server prompt that is not a valid base64 string,
+authentication is abandoned by default. However, if this option is set true,
+the error in the challenge is ignored and the client sends the response as
+usual.
+
++-------------------------------------------------------+
+|client_send|Use: plaintext|Type: string*|Default: unset|
++-------------------------------------------------------+
+
+The string is a colon-separated list of authentication data strings. Each
+string is independently expanded before being sent to the server. The first
+string is sent with the AUTH command; any more strings are sent in response to
+prompts from the server. Before each string is expanded, the value of the most
+recent prompt is placed in the next $auth<n> variable, starting with $auth1 for
+the first prompt. Up to three prompts are stored in this way. Thus, the prompt
+that is received in response to sending the first string (with the AUTH
+command) can be used in the expansion of the second string, and so on. If an
+invalid base64 string is received when client_ignore_invalid_base64 is set, an
+empty string is put in the $auth<n> variable.
+
+Note: You cannot use expansion to create multiple strings, because splitting
+takes priority and happens first.
+
+Because the PLAIN authentication mechanism requires NUL (binary zero) bytes in
+the data, further processing is applied to each string before it is sent. If
+there are any single circumflex characters in the string, they are converted to
+NULs. Should an actual circumflex be required as data, it must be doubled in
+the string.
+
+This is an example of a client configuration that implements the PLAIN
+authentication mechanism with a fixed user name and password:
+
+fixed_plain:
+  driver = plaintext
+  public_name = PLAIN
+  client_send = ^username^mysecret
+
+The lack of colons means that the entire text is sent with the AUTH command,
+with the circumflex characters converted to NULs. Note that due to the
+ambiguity of parsing three consectutive circumflex characters there is no way
+to provide a password having a leading circumflex.
+
+A similar example that uses the LOGIN mechanism is:
+
+fixed_login:
+  driver = plaintext
+  public_name = LOGIN
+  client_send = : username : mysecret
+
+The initial colon means that the first string is empty, so no data is sent with
+the AUTH command itself. The remaining strings are sent in response to prompts.
+
+
+
+===============================================================================
+35. THE CRAM_MD5 AUTHENTICATOR
+
+The CRAM-MD5 authentication mechanism is described in RFC 2195. The server
+sends a challenge string to the client, and the response consists of a user
+name and the CRAM-MD5 digest of the challenge string combined with a secret
+string (password) which is known to both server and client. Thus, the secret is
+not sent over the network as plain text, which makes this authenticator more
+secure than plaintext. However, the downside is that the secret has to be
+available in plain text at either end.
+
+
+35.1 Using cram_md5 as a server
+-------------------------------
+
+This authenticator has one server option, which must be set to configure the
+authenticator as a server:
+
++--------------------------------------------------------+
+|server_secret|Use: cram_md5|Type: string*|Default: unset|
++--------------------------------------------------------+
+
+When the server receives the client's response, the user name is placed in the
+expansion variable $auth1, and server_secret is expanded to obtain the password
+for that user. The server then computes the CRAM-MD5 digest that the client
+should have sent, and checks that it received the correct string. If the
+expansion of server_secret is forced to fail, authentication fails. If the
+expansion fails for some other reason, a temporary error code is returned to
+the client.
+
+For compatibility with previous releases of Exim, the user name is also placed
+in $1. However, the use of this variables for this purpose is now deprecated,
+as it can lead to confusion in string expansions that also use numeric
+variables for other things.
+
+For example, the following authenticator checks that the user name given by the
+client is "ph10", and if so, uses "secret" as the password. For any other user
+name, authentication fails.
+
+fixed_cram:
+  driver = cram_md5
+  public_name = CRAM-MD5
+  server_secret = ${if eq{$auth1}{ph10}{secret}fail}
+  server_set_id = $auth1
+
+If authentication succeeds, the setting of server_set_id preserves the user
+name in $authenticated_id. A more typical configuration might look up the
+secret string in a file, using the user name as the key. For example:
+
+lookup_cram:
+  driver = cram_md5
+  public_name = CRAM-MD5
+  server_secret = ${lookup{$auth1}lsearch{/etc/authpwd}\
+                  {$value}fail}
+  server_set_id = $auth1
+
+Note that this expansion explicitly forces failure if the lookup fails because
+$auth1 contains an unknown user name.
+
+As another example, if you wish to re-use a Cyrus SASL sasldb2 file without
+using the relevant libraries, you need to know the realm to specify in the
+lookup and then ask for the "userPassword" attribute for that user in that
+realm, with:
+
+cyrusless_crammd5:
+  driver = cram_md5
+  public_name = CRAM-MD5
+  server_secret = ${lookup{$auth1:mail.example.org:userPassword}\
+                  dbmjz{/etc/sasldb2}{$value}fail}
+  server_set_id = $auth1
+
+
+35.2 Using cram_md5 as a client
+-------------------------------
+
+When used as a client, the cram_md5 authenticator has two options:
+
++----------------------------------------------------------------------+
+|client_name|Use: cram_md5|Type: string*|Default: the primary host name|
++----------------------------------------------------------------------+
+
+This string is expanded, and the result used as the user name data when
+computing the response to the server's challenge.
+
++--------------------------------------------------------+
+|client_secret|Use: cram_md5|Type: string*|Default: unset|
++--------------------------------------------------------+
+
+This option must be set for the authenticator to work as a client. Its value is
+expanded and the result used as the secret string when computing the response.
+
+Different user names and secrets can be used for different servers by referring
+to $host or $host_address in the options. Forced failure of either expansion
+string is treated as an indication that this authenticator is not prepared to
+handle this case. Exim moves on to the next configured client authenticator.
+Any other expansion failure causes Exim to give up trying to send the message
+to the current server.
+
+A simple example configuration of a cram_md5 authenticator, using fixed
+strings, is:
+
+fixed_cram:
+  driver = cram_md5
+  public_name = CRAM-MD5
+  client_name = ph10
+  client_secret = secret
+
+
+
+===============================================================================
+36. THE CYRUS_SASL AUTHENTICATOR
+
+The code for this authenticator was provided by Matthew Byng-Maddick while at A
+L Digital Ltd.
+
+The cyrus_sasl authenticator provides server support for the Cyrus SASL library
+implementation of the RFC 2222 ("Simple Authentication and Security Layer").
+This library supports a number of authentication mechanisms, including PLAIN
+and LOGIN, but also several others that Exim does not support directly. In
+particular, there is support for Kerberos authentication.
+
+The cyrus_sasl authenticator provides a gatewaying mechanism directly to the
+Cyrus interface, so if your Cyrus library can do, for example, CRAM-MD5, then
+so can the cyrus_sasl authenticator. By default it uses the public name of the
+driver to determine which mechanism to support.
+
+Where access to some kind of secret file is required, for example, in GSSAPI or
+CRAM-MD5, it is worth noting that the authenticator runs as the Exim user, and
+that the Cyrus SASL library has no way of escalating privileges by default. You
+may also find you need to set environment variables, depending on the driver
+you are using.
+
+The application name provided by Exim is "exim", so various SASL options may be
+set in exim.conf in your SASL directory. If you are using GSSAPI for Kerberos,
+note that because of limitations in the GSSAPI interface, changing the server
+keytab might need to be communicated down to the Kerberos layer independently.
+The mechanism for doing so is dependent upon the Kerberos implementation.
+
+For example, for older releases of Heimdal, the environment variable
+KRB5_KTNAME may be set to point to an alternative keytab file. Exim will pass
+this variable through from its own inherited environment when started as root
+or the Exim user. The keytab file needs to be readable by the Exim user. With
+newer releases of Heimdal, a setuid Exim may cause Heimdal to discard the
+environment variable. In practice, for those releases, the Cyrus authenticator
+is not a suitable interface for GSSAPI (Kerberos) support. Instead, consider
+the heimdal_gssapi authenticator, described in chapter 39
+
+
+36.1 Using cyrus_sasl as a server
+---------------------------------
+
+The cyrus_sasl authenticator has four private options. It puts the username (on
+a successful authentication) into $auth1. For compatibility with previous
+releases of Exim, the username is also placed in $1. However, the use of this
+variable for this purpose is now deprecated, as it can lead to confusion in
+string expansions that also use numeric variables for other things.
+
++----------------------------------------------------------------+
+|server_hostname|Use: cyrus_sasl|Type: string*|Default: see below|
++----------------------------------------------------------------+
+
+This option selects the hostname that is used when communicating with the
+library. The default value is "$primary_hostname". It is up to the underlying
+SASL plug-in what it does with this data.
+
++-----------------------------------------------------------+
+|server_mech|Use: cyrus_sasl|Type: string|Default: see below|
++-----------------------------------------------------------+
+
+This option selects the authentication mechanism this driver should use. The
+default is the value of the generic public_name option. This option allows you
+to use a different underlying mechanism from the advertised name. For example:
+
+sasl:
+  driver = cyrus_sasl
+  public_name = X-ANYTHING
+  server_mech = CRAM-MD5
+  server_set_id = $auth1
+
++---------------------------------------------------------+
+|server_realm|Use: cyrus_sasl|Type: string*|Default: unset|
++---------------------------------------------------------+
+
+This specifies the SASL realm that the server claims to be in.
+
++-----------------------------------------------------------+
+|server_service|Use: cyrus_sasl|Type: string|Default: "smtp"|
++-----------------------------------------------------------+
+
+This is the SASL service that the server claims to implement.
+
+For straightforward cases, you do not need to set any of the authenticator's
+private options. All you need to do is to specify an appropriate mechanism as
+the public name. Thus, if you have a SASL library that supports CRAM-MD5 and
+PLAIN, you could have two authenticators as follows:
+
+sasl_cram_md5:
+  driver = cyrus_sasl
+  public_name = CRAM-MD5
+  server_set_id = $auth1
+
+sasl_plain:
+  driver = cyrus_sasl
+  public_name = PLAIN
+  server_set_id = $auth2
+
+Cyrus SASL does implement the LOGIN authentication method, even though it is
+not a standard method. It is disabled by default in the source distribution,
+but it is present in many binary distributions.
+
+
+
+===============================================================================
+37. THE DOVECOT AUTHENTICATOR
+
+This authenticator is an interface to the authentication facility of the
+Dovecot 2 POP/IMAP server, which can support a number of authentication
+methods. Note that Dovecot must be configured to use auth-client not
+auth-userdb. If you are using Dovecot to authenticate POP/IMAP clients, it
+might be helpful to use the same mechanisms for SMTP authentication. This is a
+server authenticator only. There is only one option:
+
++------------------------------------------------------+
+|server_socket|Use: dovecot|Type: string|Default: unset|
++------------------------------------------------------+
+
+This option must specify the UNIX socket that is the interface to Dovecot
+authentication. The public_name option must specify an authentication mechanism
+that Dovecot is configured to support. You can have several authenticators for
+different mechanisms. For example:
+
+dovecot_plain:
+  driver = dovecot
+  public_name = PLAIN
+  server_socket = /var/run/dovecot/auth-client
+  server_set_id = $auth1
+
+dovecot_ntlm:
+  driver = dovecot
+  public_name = NTLM
+  server_socket = /var/run/dovecot/auth-client
+  server_set_id = $auth1
+
+If the SMTP connection is encrypted, or if $sender_host_address is equal to
+$received_ip_address (that is, the connection is local), the "secured" option
+is passed in the Dovecot authentication command. If, for a TLS connection, a
+client certificate has been verified, the "valid-client-cert" option is passed.
+When authentication succeeds, the identity of the user who authenticated is
+placed in $auth1.
+
+The Dovecot configuration to match the above will look something like:
+
+conf.d/10-master.conf :-
+
+service auth {
+...
+#SASL
+  unix_listener auth-client {
+    mode = 0660
+    user = mail
+  }
+...
+}
+
+conf.d/10-auth.conf :-
+
+auth_mechanisms = plain login ntlm
+
+
+
+===============================================================================
+38. THE GSASL AUTHENTICATOR
+
+The gsasl authenticator provides integration for the GNU SASL library and the
+mechanisms it provides. This is new as of the 4.80 release and there are a few
+areas where the library does not let Exim smoothly scale to handle future
+authentication mechanisms, so no guarantee can be made that any particular new
+authentication mechanism will be supported without code changes in Exim.
+
+The library is expected to add support in an upcoming realease for the
+SCRAM-SHA-256 method. The macro _HAVE_AUTH_GSASL_SCRAM_SHA_256 will be defined
+when this happens.
+
+To see the list of mechanisms supported by the library run Exim with "auth"
+debug enabled and look for a line containing "GNU SASL supports". Note however
+that some may not have been tested from Exim.
+
++----------------------------------------------------+
+|client_authz|Use: gsasl|Type: string*|Default: unset|
++----------------------------------------------------+
+
+This option can be used to supply an authorization id which is different to the
+authentication_id provided by client_username option. If unset or (after
+expansion) empty it is not used, which is the common case.
+
++-------------------------------------------------------------+
+|client_channelbinding|Use: gsasl|Type: boolean|Default: false|
++-------------------------------------------------------------+
+
+See server_channelbinding below.
+
++-------------------------------------------------------+
+|client_password|Use: gsasl|Type: string*|Default: unset|
++-------------------------------------------------------+
+
+This option is exapanded before use, and should result in the password to be
+used, in clear.
+
++-------------------------------------------------------+
+|client_username|Use: gsasl|Type: string*|Default: unset|
++-------------------------------------------------------+
+
+This option is exapanded before use, and should result in the account name to
+be used.
+
++--------------------------------------------------------+
+|client_spassword|Use: gsasl|Type: string*|Default: unset|
++--------------------------------------------------------+
+
+This option is only supported for library versions 1.9.1 and greater. The macro
+_HAVE_AUTH_GSASL_SCRAM_S_KEY will be defined when this is so.
+
+If a SCRAM mechanism is being used and this option is set and correctly sized
+it is used in preference to client_password. The value after expansion should
+be a 40 (for SHA-1) or 64 (for SHA-256) character string with the
+PBKDF2-prepared password, hex-encoded.
+
+Note that this value will depend on the salt and iteration-count supplied by
+the server. The option is expanded before use. During the expansion $auth1 is
+set with the client username, $auth2 with the iteration count, and $auth3 with
+the salt.
+
+The intent of this option is to support clients that can cache thes salted
+password to save on recalculation costs. The cache lookup should return an
+unusable value (eg. an empty string) if the salt or iteration count has changed
+
+If the authentication succeeds then the above variables are set, plus the
+calculated salted password value value in $auth4, during the expansion of the 
+client_set_id option. A side-effect of this expansion can be used to prime the
+cache.
+
++-------------------------------------------------------------+
+|server_channelbinding|Use: gsasl|Type: boolean|Default: false|
++-------------------------------------------------------------+
+
+Some authentication mechanisms are able to use external context at both ends of
+the session to bind the authentication to that context, and fail the
+authentication process if that context differs. Specifically, some TLS
+ciphersuites can provide identifying information about the cryptographic
+context.
+
+This should have meant that certificate identity and verification becomes a
+non-issue, as a man-in-the-middle attack will cause the correct client and
+server to see different identifiers and authentication will fail.
+
+This is only usable by mechanisms which support "channel binding"; at time of
+writing, that's the SCRAM family. When using this feature the "-PLUS" variants
+of the method names need to be used.
+
+This defaults off to ensure smooth upgrade across Exim releases, in case this
+option causes some clients to start failing. Some future release of Exim might
+have switched the default to be true.
+
+This option was deprecated in previous releases due to doubts over the "Triple
+Handshake" vulnerability. Exim takes suitable precausions (requiring Extended
+Master Secret if TLS Session Resumption was used) for safety.
+
++-----------------------------------------------------------+
+|server_hostname|Use: gsasl|Type: string*|Default: see below|
++-----------------------------------------------------------+
+
+This option selects the hostname that is used when communicating with the
+library. The default value is "$primary_hostname". Some mechanisms will use
+this data.
+
++------------------------------------------------------+
+|server_mech|Use: gsasl|Type: string|Default: see below|
++------------------------------------------------------+
+
+This option selects the authentication mechanism this driver should use. The
+default is the value of the generic public_name option. This option allows you
+to use a different underlying mechanism from the advertised name. For example:
+
+sasl:
+  driver = gsasl
+  public_name = X-ANYTHING
+  server_mech = CRAM-MD5
+  server_set_id = $auth1
+
++-------------------------------------------------------+
+|server_password|Use: gsasl|Type: string*|Default: unset|
++-------------------------------------------------------+
+
+Various mechanisms need access to the cleartext password on the server, so that
+proof-of-possession can be demonstrated on the wire, without sending the
+password itself.
+
+The data available for lookup varies per mechanism. In all cases, $auth1 is set
+to the authentication id. The $auth2 variable will always be the authorization
+id (authz) if available, else the empty string. The $auth3 variable will always
+be the realm if available, else the empty string.
+
+A forced failure will cause authentication to defer.
+
+If using this option, it may make sense to set the server_condition option to
+be simply "true".
+
++----------------------------------------------------+
+|server_realm|Use: gsasl|Type: string*|Default: unset|
++----------------------------------------------------+
+
+This specifies the SASL realm that the server claims to be in. Some mechanisms
+will use this data.
+
++--------------------------------------------------------+
+|server_scram_iter|Use: gsasl|Type: string*|Default: 4096|
++--------------------------------------------------------+
+
+This option provides data for the SCRAM family of mechanisms. The $auth1,
+$auth2 and $auth3 variables are available when this option is expanded.
+
+The result of expansion should be a decimal number, and represents both a
+lower-bound on the security, and a compute cost factor imposed on the client
+(if it does not cache results, or the server changes either the iteration count
+or the salt). A minimum value of 4096 is required by the standards for all
+current SCRAM mechanism variants.
+
++---------------------------------------------------------+
+|server_scram_salt|Use: gsasl|Type: string*|Default: unset|
++---------------------------------------------------------+
+
+This option provides data for the SCRAM family of mechanisms. The $auth1,
+$auth2 and $auth3 variables are available when this option is expanded. The
+value should be a base64-encoded string, of random data typically 4-to-16 bytes
+long. If unset or empty after expansion the library will provides a value for
+the protocol conversation.
+
++--------------------------------------------------+
+|server_key|Use: gsasl|Type: string*|Default: unset|
++--------------------------------------------------+
+
++---------------------------------------------------+
+|server_skey|Use: gsasl|Type: string*|Default: unset|
++---------------------------------------------------+
+
+These options can be used for the SCRAM family of mechanisms to provide stored
+information related to a password, the storage of which is preferable to
+plaintext.
+
+server_key is the value defined in the SCRAM standards as ServerKey; 
+server_skey is StoredKey.
+
+They are only available for version 1.9.0 (or later) of the gsasl library. When
+this is so, the macros _OPT_AUTHENTICATOR_GSASL_SERVER_KEY and
+_HAVE_AUTH_GSASL_SCRAM_S_KEY will be defined.
+
+The $authN variables are available when these options are expanded.
+
+If set, the results of expansion should for each should be a 28 (for SHA-1) or
+44 (for SHA-256) character string of base64-coded data, and will be used in
+preference to the server_password option. If unset or not of the right length, 
+server_password will be used.
+
+The libgsasl library release includes a utility gsasl which can be used to
+generate these values.
+
++------------------------------------------------------+
+|server_service|Use: gsasl|Type: string|Default: "smtp"|
++------------------------------------------------------+
+
+This is the SASL service that the server claims to implement. Some mechanisms
+will use this data.
+
+
+38.1 gsasl auth variables
+-------------------------
+
+These may be set when evaluating specific options, as detailed above. They will
+also be set when evaluating server_condition.
+
+Unless otherwise stated below, the gsasl integration will use the following
+meanings for these variables:
+
+  * $auth1: the authentication id
+
+  * $auth2: the authorization id
+
+  * $auth3: the realm
+
+On a per-mechanism basis:
+
+  * EXTERNAL: only $auth1 is set, to the possibly empty authorization id; the 
+    server_condition option must be present.
+
+  * ANONYMOUS: only $auth1 is set, to the possibly empty anonymous token; the 
+    server_condition option must be present.
+
+  * GSSAPI: $auth1 will be set to the GSSAPI Display Name; $auth2 will be set
+    to the authorization id, the server_condition option must be present.
+
+An anonymous token is something passed along as an unauthenticated identifier;
+this is analogous to FTP anonymous authentication passing an email address, or
+software-identifier@, as the "password".
+
+An example showing the password having the realm specified in the callback and
+demonstrating a Cyrus SASL to GSASL migration approach is:
+
+gsasl_cyrusless_crammd5:
+  driver = gsasl
+  public_name = CRAM-MD5
+  server_realm = imap.example.org
+  server_password = ${lookup{$auth1:$auth3:userPassword}\
+                    dbmjz{/etc/sasldb2}{$value}fail}
+  server_set_id = ${quote:$auth1}
+  server_condition = yes
+
+
+
+===============================================================================
+39. THE HEIMDAL_GSSAPI AUTHENTICATOR
+
+The heimdal_gssapi authenticator provides server integration for the Heimdal
+GSSAPI/Kerberos library, permitting Exim to set a keytab pathname reliably.
+
++--------------------------------------------------------------------+
+|server_hostname|Use: heimdal_gssapi|Type: string*|Default: see below|
++--------------------------------------------------------------------+
+
+This option selects the hostname that is used, with server_service, for
+constructing the GSS server name, as a GSS_C_NT_HOSTBASED_SERVICE identifier.
+The default value is "$primary_hostname".
+
++--------------------------------------------------------------+
+|server_keytab|Use: heimdal_gssapi|Type: string*|Default: unset|
++--------------------------------------------------------------+
+
+If set, then Heimdal will not use the system default keytab (typically /etc/
+krb5.keytab) but instead the pathname given in this option. The value should be
+a pathname, with no "file:" prefix.
+
++--------------------------------------------------------------+
+|server_service|Use: heimdal_gssapi|Type: string*|Default: smtp|
++--------------------------------------------------------------+
+
+This option specifies the service identifier used, in conjunction with 
+server_hostname, for building the identifier for finding credentials from the
+keytab.
+
+
+39.1 heimdal_gssapi auth variables
+----------------------------------
+
+Beware that these variables will typically include a realm, thus will appear to
+be roughly like an email address already. The authzid in $auth2 is not
+verified, so a malicious client can set it to anything.
+
+The $auth1 field should be safely trustable as a value from the Key
+Distribution Center. Note that these are not quite email addresses. Each
+identifier is for a role, and so the left-hand-side may include a role suffix.
+For instance, "joe/admin@EXAMPLE.ORG".
+
+  * $auth1: the authentication id, set to the GSS Display Name.
+
+  * $auth2: the authorization id, sent within SASL encapsulation after
+    authentication. If that was empty, this will also be set to the GSS Display
+    Name.
+
+
+
+===============================================================================
+40. THE SPA AUTHENTICATOR
+
+The spa authenticator provides client support for Microsoft's Secure Password
+Authentication mechanism, which is also sometimes known as NTLM (NT LanMan).
+The code for client side of this authenticator was contributed by Marc
+Prud'hommeaux, and much of it is taken from the Samba project (https://
+www.samba.org/). The code for the server side was subsequently contributed by
+Tom Kistner. The mechanism works as follows:
+
+  * After the AUTH command has been accepted, the client sends an SPA
+    authentication request based on the user name and optional domain.
+
+  * The server sends back a challenge.
+
+  * The client builds a challenge response which makes use of the user's
+    password and sends it to the server, which then accepts or rejects it.
+
+Encryption is used to protect the password in transit.
+
+
+40.1 Using spa as a server
+--------------------------
+
+The spa authenticator has just one server option:
+
++-----------------------------------------------------+
+|server_password|Use: spa|Type: string*|Default: unset|
++-----------------------------------------------------+
+
+This option is expanded, and the result must be the cleartext password for the
+authenticating user, whose name is at this point in $auth1. For compatibility
+with previous releases of Exim, the user name is also placed in $1. However,
+the use of this variable for this purpose is now deprecated, as it can lead to
+confusion in string expansions that also use numeric variables for other
+things. For example:
+
+spa:
+  driver = spa
+  public_name = NTLM
+  server_password = \
+    ${lookup{$auth1}lsearch{/etc/exim/spa_clearpass}{$value}fail}
+
+If the expansion is forced to fail, authentication fails. Any other expansion
+failure causes a temporary error code to be returned.
+
+
+40.2 Using spa as a client
+--------------------------
+
+The spa authenticator has the following client options:
+
++---------------------------------------------------+
+|client_domain|Use: spa|Type: string*|Default: unset|
++---------------------------------------------------+
+
+This option specifies an optional domain for the authentication.
+
++-----------------------------------------------------+
+|client_password|Use: spa|Type: string*|Default: unset|
++-----------------------------------------------------+
+
+This option specifies the user's password, and must be set.
+
++-----------------------------------------------------+
+|client_username|Use: spa|Type: string*|Default: unset|
++-----------------------------------------------------+
+
+This option specifies the user name, and must be set. Here is an example of a
+configuration of this authenticator for use with the mail servers at msn.com:
+
+msn:
+  driver = spa
+  public_name = MSN
+  client_username = msn/msn_username
+  client_password = msn_plaintext_password
+  client_domain = DOMAIN_OR_UNSET
+
+
+
+===============================================================================
+41. THE EXTERNAL AUTHENTICATOR
+
+The external authenticator provides support for authentication based on
+non-SMTP information. The specification is in RFC 4422 Appendix A (https://
+tools.ietf.org/html/rfc4422). It is only a transport and negotiation mechanism;
+the process of authentication is entirely controlled by the server
+configuration.
+
+The client presents an identity in-clear. It is probably wise for a server to
+only advertise, and for clients to only attempt, this authentication method on
+a secure (eg. under TLS) connection.
+
+One possible use, compatible with the K-9 Mail Android client (https://
+k9mail.github.io/), is for using X509 client certificates.
+
+It thus overlaps in function with the TLS authenticator (see 42) but is a full
+SMTP SASL authenticator rather than being implicit for TLS-connection carried
+client certificates only.
+
+The examples and discussion in this chapter assume that client-certificate
+authentication is being done.
+
+The client must present a certificate, for which it must have been requested
+via the tls_verify_hosts or tls_try_verify_hosts main options (see 43). For
+authentication to be effective the certificate should be verifiable against a
+trust-anchor certificate known to the server.
+
+
+41.1 External options
+---------------------
+
+The external authenticator has two server options:
+
++--------------------------------------------------------+
+|server_param2|Use: external|Type: string*|Default: unset|
++--------------------------------------------------------+
+
++--------------------------------------------------------+
+|server_param3|Use: external|Type: string*|Default: unset|
++--------------------------------------------------------+
+
+These options are expanded before the server_condition option and the result
+are placed in $auth2 and $auth3 resectively. If the expansion is forced to
+fail, authentication fails. Any other expansion failure causes a temporary
+error code to be returned.
+
+They can be used to clarify the coding of a complex server_condition.
+
+
+41.2 Using external in a server
+-------------------------------
+
+When running as a server, external performs the authentication test by
+expanding a string. The data sent by the client with the AUTH command, or in
+response to subsequent prompts, is base64 encoded, and so may contain any byte
+values when decoded. The decoded value is treated as an identity for
+authentication and placed in the expansion variable $auth1.
+
+For compatibility with previous releases of Exim, the value is also placed in
+the expansion variable $1. However, the use of this variable for this purpose
+is now deprecated, as it can lead to confusion in string expansions that also
+use them for other things.
+
+Once an identity has been received, server_condition is expanded. If the
+expansion is forced to fail, authentication fails. Any other expansion failure
+causes a temporary error code to be returned. If the result of a successful
+expansion is an empty string, "0", "no", or "false", authentication fails. If
+the result of the expansion is "1", "yes", or "true", authentication succeeds
+and the generic server_set_id option is expanded and saved in $authenticated_id
+. For any other result, a temporary error code is returned, with the expanded
+string as the error text.
+
+Example:
+
+ext_ccert_san_mail:
+  driver =            external
+  public_name =       EXTERNAL
+
+  server_advertise_condition = $tls_in_certificate_verified
+  server_param2 =     ${certextract {subj_altname,mail,>:} \
+                                    {$tls_in_peercert}}
+  server_condition =  ${if forany {$auth2} \
+                            {eq {$item}{$auth1}}}
+  server_set_id =     $auth1
+
+This accepts a client certificate that is verifiable against any of your
+configured trust-anchors (which usually means the full set of public CAs) and
+which has a mail-SAN matching the claimed identity sent by the client.
+
+Note: up to TLS1.2, the client cert is on the wire in-clear, including the SAN.
+The account name is therefore guessable by an opponent. TLS 1.3 protects both
+server and client certificates, and is not vulnerable in this way.
+
+
+41.3 Using external in a client
+-------------------------------
+
+The external authenticator has one client option:
+
++------------------------------------------------------+
+|client_send|Use: external|Type: string*|Default: unset|
++------------------------------------------------------+
+
+This option is expanded and sent with the AUTH command as the identity being
+asserted.
+
+Example:
+
+ext_ccert:
+  driver =      external
+  public_name = EXTERNAL
+
+  client_condition = ${if !eq{$tls_out_cipher}{}}
+  client_send = myaccount@smarthost.example.net
+
+
+
+===============================================================================
+42. THE TLS AUTHENTICATOR
+
+The tls authenticator provides server support for authentication based on
+client certificates.
+
+It is not an SMTP authentication mechanism and is not advertised by the server
+as part of the SMTP EHLO response. It is an Exim authenticator in the sense
+that it affects the protocol element of the log line, can be tested for by the 
+authenticated ACL condition, and can set the $authenticated_id variable.
+
+The client must present a verifiable certificate, for which it must have been
+requested via the tls_verify_hosts or tls_try_verify_hosts main options (see 43
+).
+
+If an authenticator of this type is configured it is run before any SMTP-level
+communication is done, and can authenticate the connection. If it does, SMTP
+authentication is not offered.
+
+A maximum of one authenticator of this type may be present.
+
+The tls authenticator has three server options:
+
++---------------------------------------------------+
+|server_param1|Use: tls|Type: string*|Default: unset|
++---------------------------------------------------+
+
+This option is expanded after the TLS negotiation and the result is placed in
+$auth1. If the expansion is forced to fail, authentication fails. Any other
+expansion failure causes a temporary error code to be returned.
+
++---------------------------------------------------+
+|server_param2|Use: tls|Type: string*|Default: unset|
++---------------------------------------------------+
+
++---------------------------------------------------+
+|server_param3|Use: tls|Type: string*|Default: unset|
++---------------------------------------------------+
+
+As above, for $auth2 and $auth3.
+
+server_param1 may also be spelled server_param.
+
+Example:
+
+tls:
+  driver = tls
+  server_param1 =     ${certextract {subj_altname,mail,>:} \
+                                    {$tls_in_peercert}}
+  server_condition =  ${if and { {eq{$tls_in_certificate_verified}{1}} \
+                                 {forany {$auth1} \
+                            {!= {0} \
+                                {${lookup ldap{ldap:///\
+                         mailname=${quote_ldap_dn:${lc:$item}},\
+                         ou=users,LDAP_DC?mailid} {$value}{0} \
+                       }    }  } }}}
+  server_set_id =     ${if = {1}{${listcount:$auth1}} {$auth1}{}}
+
+This accepts a client certificate that is verifiable against any of your
+configured trust-anchors (which usually means the full set of public CAs) and
+which has a SAN with a good account name.
+
+Note that, up to TLS1.2, the client cert is on the wire in-clear, including the
+SAN, The account name is therefore guessable by an opponent. TLS 1.3 protects
+both server and client certificates, and is not vulnerable in this way.
+Likewise, a traditional plaintext SMTP AUTH done inside TLS is not.
+
+Note that because authentication is traditionally an SMTP operation, the 
+authenticated ACL condition cannot be used in a connect- or helo-ACL.
+
+
+
+===============================================================================
+43. ENCRYPTED SMTP CONNECTIONS USING TLS/SSL
+
+Support for TLS (Transport Layer Security), formerly known as SSL (Secure
+Sockets Layer), is implemented by making use of the OpenSSL library or the
+GnuTLS library (Exim requires GnuTLS release 1.0 or later). There is no
+cryptographic code in the Exim distribution itself for implementing TLS. In
+order to use this feature you must install OpenSSL or GnuTLS, and then build a
+version of Exim that includes TLS support (see section 4.7). You also need to
+understand the basic concepts of encryption at a managerial level, and in
+particular, the way that public keys, private keys, and certificates are used.
+
+RFC 3207 defines how SMTP connections can make use of encryption. Once a
+connection is established, the client issues a STARTTLS command. If the server
+accepts this, the client and the server negotiate an encryption mechanism. If
+the negotiation succeeds, the data that subsequently passes between them is
+encrypted.
+
+Exim's ACLs can detect whether the current SMTP session is encrypted or not,
+and if so, what cipher suite is in use, whether the client supplied a
+certificate, and whether or not that certificate was verified. This makes it
+possible for an Exim server to deny or accept certain commands based on the
+encryption state.
+
+Warning: Certain types of firewall and certain anti-virus products can disrupt
+TLS connections. You need to turn off SMTP scanning for these products in order
+to get TLS to work.
+
+
+43.1 Support for the "submissions" (aka "ssmtp" and "smtps") protocol
+---------------------------------------------------------------------
+
+The history of port numbers for TLS in SMTP is a little messy and has been
+contentious. As of RFC 8314, the common practice of using the historically
+allocated port 465 for "email submission but with TLS immediately upon connect
+instead of using STARTTLS" is officially blessed by the IETF, and recommended
+by them in preference to STARTTLS.
+
+The name originally assigned to the port was "ssmtp" or "smtps", but as clarity
+emerged over the dual roles of SMTP, for MX delivery and Email Submission,
+nomenclature has shifted. The modern name is now "submissions".
+
+This approach was, for a while, officially abandoned when encrypted SMTP was
+standardized, but many clients kept using it, even as the TCP port number was
+reassigned for other use. Thus you may encounter guidance claiming that you
+shouldn't enable use of this port. In practice, a number of mail-clients have
+only ever supported submissions, not submission with STARTTLS upgrade. Ideally,
+offer both submission (587) and submissions (465) service.
+
+Exim supports TLS-on-connect by means of the tls_on_connect_ports global
+option. Its value must be a list of port numbers; the most common use is
+expected to be:
+
+tls_on_connect_ports = 465
+
+The port numbers specified by this option apply to all SMTP connections, both
+via the daemon and via inetd. You still need to specify all the ports that the
+daemon uses (by setting daemon_smtp_ports or local_interfaces or the -oX
+command line option) because tls_on_connect_ports does not add an extra port -
+rather, it specifies different behaviour on a port that is defined elsewhere.
+
+There is also a -tls-on-connect command line option. This overrides 
+tls_on_connect_ports; it forces the TLS-only behaviour for all ports.
+
+
+43.2 OpenSSL vs GnuTLS
+----------------------
+
+TLS is supported in Exim using either the OpenSSL or GnuTLS library. To build
+Exim to use OpenSSL you need to set
+
+USE_OPENSSL=yes
+
+in Local/Makefile.
+
+To build Exim to use GnuTLS, you need to set
+
+USE_GNUTLS=yes
+
+in Local/Makefile.
+
+You must also set TLS_LIBS and TLS_INCLUDE appropriately, so that the include
+files and libraries for GnuTLS can be found.
+
+There are some differences in usage when using GnuTLS instead of OpenSSL:
+
+  * The tls_verify_certificates option cannot be the path of a directory for
+    GnuTLS versions before 3.3.6 (for later versions, or OpenSSL, it can be
+    either).
+
+  * The default value for tls_dhparam differs for historical reasons.
+
+  * Distinguished Name (DN) strings reported by the OpenSSL library use a slash
+    for separating fields; GnuTLS uses commas, in accordance with RFC 2253.
+    This affects the value of the $tls_in_peerdn and $tls_out_peerdn variables.
+
+  * OpenSSL identifies cipher suites using hyphens as separators, for example:
+    DES-CBC3-SHA. GnuTLS historically used underscores, for example:
+    RSA_ARCFOUR_SHA. What is more, OpenSSL complains if underscores are present
+    in a cipher list. To make life simpler, Exim changes underscores to hyphens
+    for OpenSSL and passes the string unchanged to GnuTLS (expecting the
+    library to handle its own older variants) when processing lists of cipher
+    suites in the tls_require_ciphers options (the global option and the smtp
+    transport option).
+
+  * The tls_require_ciphers options operate differently, as described in the
+    sections 43.4 and 43.5.
+
+  * The tls_dh_min_bits SMTP transport option is only honoured by GnuTLS. When
+    using OpenSSL, this option is ignored. (If an API is found to let OpenSSL
+    be configured in this way, let the Exim Maintainers know and we'll likely
+    use it).
+
+  * With GnuTLS, if an explicit list is used for the tls_privatekey main option
+    main option, it must be ordered to match the tls_certificate list.
+
+  * Some other recently added features may only be available in one or the
+    other. This should be documented with the feature. If the documentation
+    does not explicitly state that the feature is infeasible in the other TLS
+    implementation, then patches are welcome.
+
+  * The output from "exim -bV" will show which (if any) support was included in
+    the build. Also, the macro "_HAVE_OPENSSL" or "_HAVE_GNUTLS" will be
+    defined.
+
+
+43.3 GnuTLS parameter computation
+---------------------------------
+
+This section only applies if tls_dhparam is set to "historic" or to an explicit
+path; if the latter, then the text about generation still applies, but not the
+chosen filename. By default, as of Exim 4.80 a hard-coded D-H prime is used.
+See the documentation of tls_dhparam for more information.
+
+GnuTLS uses D-H parameters that may take a substantial amount of time to
+compute. It is unreasonable to re-compute them for every TLS session.
+Therefore, Exim keeps this data in a file in its spool directory, called
+gnutls-params-NNNN for some value of NNNN, corresponding to the number of bits
+requested. The file is owned by the Exim user and is readable only by its
+owner. Every Exim process that start up GnuTLS reads the D-H parameters from
+this file. If the file does not exist, the first Exim process that needs it
+computes the data and writes it to a temporary file which is renamed once it is
+complete. It does not matter if several Exim processes do this simultaneously
+(apart from wasting a few resources). Once a file is in place, new Exim
+processes immediately start using it.
+
+For maximum security, the parameters that are stored in this file should be
+recalculated periodically, the frequency depending on your paranoia level. If
+you are avoiding using the fixed D-H primes published in RFCs, then you are
+concerned about some advanced attacks and will wish to do this; if you do not
+regenerate then you might as well stick to the standard primes.
+
+Arranging this is easy in principle; just delete the file when you want new
+values to be computed. However, there may be a problem. The calculation of new
+parameters needs random numbers, and these are obtained from /dev/random. If
+the system is not very active, /dev/random may delay returning data until
+enough randomness (entropy) is available. This may cause Exim to hang for a
+substantial amount of time, causing timeouts on incoming connections.
+
+The solution is to generate the parameters externally to Exim. They are stored
+in gnutls-params-N in PEM format, which means that they can be generated
+externally using the certtool command that is part of GnuTLS.
+
+To replace the parameters with new ones, instead of deleting the file and
+letting Exim re-create it, you can generate new parameters using certtool and,
+when this has been done, replace Exim's cache file by renaming. The relevant
+commands are something like this:
+
+# ls
+[ look for file; assume gnutls-params-2236 is the most recent ]
+# rm -f new-params
+# touch new-params
+# chown exim:exim new-params
+# chmod 0600 new-params
+# certtool --generate-dh-params --bits 2236 >>new-params
+# openssl dhparam -noout -text -in new-params | head
+[ check the first line, make sure it's not more than 2236;
+  if it is, then go back to the start ("rm") and repeat
+  until the size generated is at most the size requested ]
+# chmod 0400 new-params
+# mv new-params gnutls-params-2236
+
+If Exim never has to generate the parameters itself, the possibility of
+stalling is removed.
+
+The filename changed in Exim 4.80, to gain the -bits suffix. The value which
+Exim will choose depends upon the version of GnuTLS in use. For older GnuTLS,
+the value remains hard-coded in Exim as 1024. As of GnuTLS 2.12.x, there is a
+way for Exim to ask for the "normal" number of bits for D-H public-key usage,
+and Exim does so. This attempt to remove Exim from TLS policy decisions failed,
+as GnuTLS 2.12 returns a value higher than the current hard-coded limit of the
+NSS library. Thus Exim gains the tls_dh_max_bits global option, which applies
+to all D-H usage, client or server. If the value returned by GnuTLS is greater
+than tls_dh_max_bits then the value will be clamped down to tls_dh_max_bits.
+The default value has been set at the current NSS limit, which is still much
+higher than Exim historically used.
+
+The filename and bits used will change as the GnuTLS maintainers change the
+value for their parameter "GNUTLS_SEC_PARAM_NORMAL", as clamped by 
+tls_dh_max_bits. At the time of writing (mid 2012), GnuTLS 2.12 recommends 2432
+bits, while NSS is limited to 2236 bits.
+
+In fact, the requested value will be *lower* than tls_dh_max_bits, to increase
+the chance of the generated prime actually being within acceptable bounds, as
+GnuTLS has been observed to overshoot. Note the check step in the procedure
+above. There is no sane procedure available to Exim to double-check the size of
+the generated prime, so it might still be too large.
+
+
+43.4 Requiring specific ciphers in OpenSSL
+------------------------------------------
+
+There is a function in the OpenSSL library that can be passed a list of cipher
+suites before the cipher negotiation takes place. This specifies which ciphers
+are acceptable for TLS versions prior to 1.3. The list is colon separated and
+may contain names like DES-CBC3-SHA. Exim passes the expanded value of 
+tls_require_ciphers directly to this function call. Many systems will install
+the OpenSSL manual-pages, so you may have ciphers(1) available to you. The
+following quotation from the OpenSSL documentation specifies what forms of item
+are allowed in the cipher string:
+
+  * It can consist of a single cipher suite such as RC4-SHA.
+
+  * It can represent a list of cipher suites containing a certain algorithm, or
+    cipher suites of a certain type. For example SHA1 represents all ciphers
+    suites using the digest algorithm SHA1 and SSLv3 represents all SSL v3
+    algorithms.
+
+  * Lists of cipher suites can be combined in a single cipher string using the
+    + character. This is used as a logical and operation. For example SHA1+DES
+    represents all cipher suites containing the SHA1 and the DES algorithms.
+
+Each cipher string can be optionally preceded by one of the characters "!", "-"
+or "+".
+
+  * If "!" is used, the ciphers are permanently deleted from the list. The
+    ciphers deleted can never reappear in the list even if they are explicitly
+    stated.
+
+  * If "-" is used, the ciphers are deleted from the list, but some or all of
+    the ciphers can be added again by later options.
+
+  * If "+" is used, the ciphers are moved to the end of the list. This option
+    does not add any new ciphers; it just moves matching existing ones.
+
+If none of these characters is present, the string is interpreted as a list of
+ciphers to be appended to the current preference list. If the list includes any
+ciphers already present they will be ignored: that is, they will not be moved
+to the end of the list.
+
+The OpenSSL ciphers(1) command may be used to test the results of a given
+string:
+
+# note single-quotes to get ! past any shell history expansion
+$ openssl ciphers 'HIGH:!MD5:!SHA1'
+
+This example will let the library defaults be permitted on the MX port, where
+there's probably no identity verification anyway, but ups the ante on the
+submission ports where the administrator might have some influence on the
+choice of clients used:
+
+# OpenSSL variant; see man ciphers(1)
+tls_require_ciphers = ${if =={$received_port}{25}\
+                           {DEFAULT}\
+                           {HIGH:!MD5:!SHA1}}
+
+This example will prefer ECDSA-authenticated ciphers over RSA ones:
+
+tls_require_ciphers = ECDSA:RSA:!COMPLEMENTOFDEFAULT
+
+For TLS version 1.3 the control available is less fine-grained and Exim does
+not provide access to it at present. The value of the tls_require_ciphers
+option is ignored when TLS version 1.3 is negotiated.
+
+As of writing the library default cipher suite list for TLSv1.3 is
+
+TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256
+
+
+43.5 Requiring specific ciphers or other parameters in GnuTLS
+-------------------------------------------------------------
+
+The GnuTLS library allows the caller to provide a "priority string", documented
+as part of the gnutls_priority_init function. This is very similar to the
+ciphersuite specification in OpenSSL.
+
+The tls_require_ciphers option is treated as the GnuTLS priority string and
+controls both protocols and ciphers.
+
+The tls_require_ciphers option is available both as an global option,
+controlling how Exim behaves as a server, and also as an option of the smtp
+transport, controlling how Exim behaves as a client. In both cases the value is
+string expanded. The resulting string is not an Exim list and the string is
+given to the GnuTLS library, so that Exim does not need to be aware of future
+feature enhancements of GnuTLS.
+
+Documentation of the strings accepted may be found in the GnuTLS manual, under
+"Priority strings". This is online as https://www.gnutls.org/manual/html_node/
+Priority-Strings.html, but beware that this relates to GnuTLS 3, which may be
+newer than the version installed on your system. If you are using GnuTLS 3,
+then the example code https://www.gnutls.org/manual/gnutls.html#
+Listing-the-ciphersuites-in-a-priority-string on that site can be used to test
+a given string.
+
+For example:
+
+# Disable older versions of protocols
+tls_require_ciphers = NORMAL:%LATEST_RECORD_VERSION:-VERS-SSL3.0
+
+Prior to Exim 4.80, an older API of GnuTLS was used, and Exim supported three
+additional options, "gnutls_require_kx", "gnutls_require_mac" and "
+gnutls_require_protocols". tls_require_ciphers was an Exim list.
+
+This example will let the library defaults be permitted on the MX port, where
+there's probably no identity verification anyway, and lowers security further
+by increasing compatibility; but this ups the ante on the submission ports
+where the administrator might have some influence on the choice of clients
+used:
+
+# GnuTLS variant
+tls_require_ciphers = ${if =={$received_port}{25}\
+                           {NORMAL:%COMPAT}\
+                           {SECURE128}}
+
+
+43.6 Configuring an Exim server to use TLS
+------------------------------------------
+
+When Exim has been built with TLS support, it advertises the availability of
+the STARTTLS command to client hosts that match tls_advertise_hosts, but not to
+any others. The default value of this option is *, which means that STARTTLS is
+always advertised. Set it to blank to never advertise; this is reasonable for
+systems that want to use TLS only as a client.
+
+If STARTTLS is to be used you need to set some other options in order to make
+TLS available.
+
+If a client issues a STARTTLS command and there is some configuration problem
+in the server, the command is rejected with a 454 error. If the client persists
+in trying to issue SMTP commands, all except QUIT are rejected with the error
+
+554 Security failure
+
+If a STARTTLS command is issued within an existing TLS session, it is rejected
+with a 554 error code.
+
+To enable TLS operations on a server, the tls_advertise_hosts option must be
+set to match some hosts. The default is * which matches all hosts.
+
+If this is all you do, TLS encryption will be enabled but not authentication -
+meaning that the peer has no assurance it is actually you he is talking to. You
+gain protection from a passive sniffer listening on the wire but not from
+someone able to intercept the communication.
+
+Further protection requires some further configuration at the server end.
+
+To make TLS work you need to set, in the server,
+
+tls_certificate = /some/file/name
+tls_privatekey = /some/file/name
+
+These options are, in fact, expanded strings, so you can make them depend on
+the identity of the client that is connected if you wish. The first file
+contains the server's X509 certificate, and the second contains the private key
+that goes with it. These files need to be PEM format and readable by the Exim
+user, and must always be given as full path names. The key must not be
+password-protected. They can be the same file if both the certificate and the
+key are contained within it. If tls_privatekey is not set, or if its expansion
+is forced to fail or results in an empty string, this is assumed to be the
+case. The certificate file may also contain intermediate certificates that need
+to be sent to the client to enable it to authenticate the server's certificate.
+
+For dual-stack (eg. RSA and ECDSA) configurations, these options can be
+colon-separated lists of file paths. Ciphers using given authentication
+algorithms require the presence of a suitable certificate to supply the
+public-key. The server selects among the certificates to present to the client
+depending on the selected cipher, hence the priority ordering for ciphers will
+affect which certificate is used.
+
+If you do not understand about certificates and keys, please try to find a
+source of this background information, which is not Exim-specific. (There are a
+few comments below in section 43.14.)
+
+Note: These options do not apply when Exim is operating as a client - they
+apply only in the case of a server. If you need to use a certificate in an Exim
+client, you must set the options of the same names in an smtp transport.
+
+With just these options, an Exim server will be able to use TLS. It does not
+require the client to have a certificate (but see below for how to insist on
+this). There is one other option that may be needed in other situations. If
+
+tls_dhparam = /some/file/name
+
+is set, the SSL library is initialized for the use of Diffie-Hellman ciphers
+with the parameters contained in the file. Set this to "none" to disable use of
+DH entirely, by making no prime available:
+
+tls_dhparam = none
+
+This may also be set to a string identifying a standard prime to be used for
+DH; if it is set to "default" or, for OpenSSL, is unset, then the prime used is
+"ike23". There are a few standard primes available, see the documentation for 
+tls_dhparam for the complete list.
+
+See the command
+
+openssl dhparam
+
+for a way of generating file data.
+
+The strings supplied for these three options are expanded every time a client
+host connects. It is therefore possible to use different certificates and keys
+for different hosts, if you so wish, by making use of the client's IP address
+in $sender_host_address to control the expansion. If a string expansion is
+forced to fail, Exim behaves as if the option is not set.
+
+The variable $tls_in_cipher is set to the cipher suite that was negotiated for
+an incoming TLS connection. It is included in the Received: header of an
+incoming message (by default - you can, of course, change this), and it is also
+included in the log line that records a message's arrival, keyed by "X=",
+unless the tls_cipher log selector is turned off. The encrypted condition can
+be used to test for specific cipher suites in ACLs.
+
+Once TLS has been established, the ACLs that run for subsequent SMTP commands
+can check the name of the cipher suite and vary their actions accordingly. The
+cipher suite names vary, depending on which TLS library is being used. For
+example, OpenSSL uses the name DES-CBC3-SHA for the cipher suite which in other
+contexts is known as TLS_RSA_WITH_3DES_EDE_CBC_SHA. Check the OpenSSL or GnuTLS
+documentation for more details.
+
+For outgoing SMTP deliveries, $tls_out_cipher is used and logged (again
+depending on the tls_cipher log selector).
+
+
+43.7 Requesting and verifying client certificates
+-------------------------------------------------
+
+If you want an Exim server to request a certificate when negotiating a TLS
+session with a client, you must set either tls_verify_hosts or 
+tls_try_verify_hosts. You can, of course, set either of them to * to apply to
+all TLS connections. For any host that matches one of these options, Exim
+requests a certificate as part of the setup of the TLS session. The contents of
+the certificate are verified by comparing it with a list of expected
+trust-anchors or certificates. These may be the system default set (depending
+on library version), an explicit file or, depending on library version, a
+directory, identified by tls_verify_certificates.
+
+A file can contain multiple certificates, concatenated end to end. If a
+directory is used (OpenSSL only), each certificate must be in a separate file,
+with a name (or a symbolic link) of the form <hash>.0, where <hash> is a hash
+value constructed from the certificate. You can compute the relevant hash by
+running the command
+
+openssl x509 -hash -noout -in /cert/file
+
+where /cert/file contains a single certificate.
+
+There is no checking of names of the client against the certificate Subject
+Name or Subject Alternate Names.
+
+The difference between tls_verify_hosts and tls_try_verify_hosts is what
+happens if the client does not supply a certificate, or if the certificate does
+not match any of the certificates in the collection named by 
+tls_verify_certificates. If the client matches tls_verify_hosts, the attempt to
+set up a TLS session is aborted, and the incoming connection is dropped. If the
+client matches tls_try_verify_hosts, the (encrypted) SMTP session continues.
+ACLs that run for subsequent SMTP commands can detect the fact that no
+certificate was verified, and vary their actions accordingly. For example, you
+can insist on a certificate before accepting a message for relaying, but not
+when the message is destined for local delivery.
+
+When a client supplies a certificate (whether it verifies or not), the value of
+the Distinguished Name of the certificate is made available in the variable
+$tls_in_peerdn during subsequent processing of the message.
+
+Because it is often a long text string, it is not included in the log line or 
+Received: header by default. You can arrange for it to be logged, keyed by "DN=
+", by setting the tls_peerdn log selector, and you can use received_header_text
+to change the Received: header. When no certificate is supplied, $tls_in_peerdn
+is empty.
+
+
+43.8 Revoked certificates
+-------------------------
+
+Certificate issuing authorities issue Certificate Revocation Lists (CRLs) when
+certificates are revoked. If you have such a list, you can pass it to an Exim
+server using the global option called tls_crl and to an Exim client using an
+identically named option for the smtp transport. In each case, the value of the
+option is expanded and must then be the name of a file that contains a CRL in
+PEM format. The downside is that clients have to periodically re-download a
+potentially huge file from every certificate authority they know of.
+
+The way with most moving parts at query time is Online Certificate Status
+Protocol (OCSP), where the client verifies the certificate against an OCSP
+server run by the CA. This lets the CA track all usage of the certs. It
+requires running software with access to the private key of the CA, to sign the
+responses to the OCSP queries. OCSP is based on HTTP and can be proxied
+accordingly.
+
+The only widespread OCSP server implementation (known to this writer) comes as
+part of OpenSSL and aborts on an invalid request, such as connecting to the
+port and then disconnecting. This requires re-entering the passphrase each time
+some random client does this.
+
+The third way is OCSP Stapling; in this, the server using a certificate issued
+by the CA periodically requests an OCSP proof of validity from the OCSP server,
+then serves it up inline as part of the TLS negotiation. This approach adds no
+extra round trips, does not let the CA track users, scales well with number of
+certs issued by the CA and is resilient to temporary OCSP server failures, as
+long as the server starts retrying to fetch an OCSP proof some time before its
+current proof expires. The downside is that it requires server support.
+
+Unless Exim is built with the support disabled, or with GnuTLS earlier than
+version 3.3.16 / 3.4.8 support for OCSP stapling is included.
+
+There is a global option called tls_ocsp_file. The file specified therein is
+expected to be in DER format, and contain an OCSP proof. Exim will serve it as
+part of the TLS handshake. This option will be re-expanded for SNI, if the 
+tls_certificate option contains "tls_in_sni", as per other TLS options.
+
+Exim does not at this time implement any support for fetching a new OCSP proof.
+The burden is on the administrator to handle this, outside of Exim. The file
+specified should be replaced atomically, so that the contents are always valid.
+Exim will expand the tls_ocsp_file option on each connection, so a new file
+will be handled transparently on the next connection.
+
+When built with OpenSSL Exim will check for a valid next update timestamp in
+the OCSP proof; if not present, or if the proof has expired, it will be
+ignored.
+
+For the client to be able to verify the stapled OCSP the server must also
+supply, in its stapled information, any intermediate certificates for the chain
+leading to the OCSP proof from the signer of the server certificate. There may
+be zero or one such. These intermediate certificates should be added to the
+server OCSP stapling file named by tls_ocsp_file.
+
+Note that the proof only covers the terminal server certificate, not any of the
+chain from CA to it.
+
+There is no current way to staple a proof for a client certificate.
+
+  A helper script "ocsp_fetch.pl" for fetching a proof from a CA
+  OCSP server is supplied.  The server URL may be included in the
+  server certificate, if the CA is helpful.
+
+  One failure mode seen was the OCSP Signer cert expiring before the end
+  of validity of the OCSP proof. The checking done by Exim/OpenSSL
+  noted this as invalid overall, but the re-fetch script did not.
+
+
+43.9 Caching of static server configuration items
+-------------------------------------------------
+
+If any of the main configuration options tls_certificate, tls_privatekey, 
+tls_crl and tls_ocsp_file have values with no expandable elements, then the
+associated information is loaded at daemon startup. It is made available to
+child processes forked for handling received SMTP connections.
+
+This caching is currently only supported under Linux and FreeBSD.
+
+If caching is not possible, for example if an item has to be dependent on the
+peer host so contains a $sender_host_name expansion, the load of the associated
+information is done at the startup of the TLS connection.
+
+The cache is invalidated and reloaded after any changes to the directories
+containing files specified by these options.
+
+The information specified by the main option tls_verify_certificates is
+similarly cached so long as it specifies files explicitly or (under GnuTLS) is
+the string "system,cache". The latter case is not automatically invalidated; it
+is the operator's responsibility to arrange for a daemon restart any time the
+system certificate authority bundle is updated. A HUP signal is sufficient for
+this. The value "system" results in no caching under GnuTLS.
+
+The macro _HAVE_TLS_CA_CACHE will be defined if the suffix for "system" is
+acceptable in configurations for the Exim executavble.
+
+Caching of the system Certificate Authorities bundle can save siginificant time
+and processing on every TLS connection accepted by Exim.
+
+
+43.10 Configuring an Exim client to use TLS
+-------------------------------------------
+
+The tls_cipher and tls_peerdn log selectors apply to outgoing SMTP deliveries
+as well as to incoming, the latter one causing logging of the server
+certificate's DN. The remaining client configuration for TLS is all within the 
+smtp transport.
+
+It is not necessary to set any options to have TLS work in the smtp transport.
+If Exim is built with TLS support, and TLS is advertised by a server, the smtp
+transport always tries to start a TLS session. However, this can be prevented
+by setting hosts_avoid_tls (an option of the transport) to a list of server
+hosts for which TLS should not be used.
+
+If you do not want Exim to attempt to send messages unencrypted when an attempt
+to set up an encrypted connection fails in any way, you can set 
+hosts_require_tls to a list of hosts for which encryption is mandatory. For
+those hosts, delivery is always deferred if an encrypted connection cannot be
+set up. If there are any other hosts for the address, they are tried in the
+usual way.
+
+When the server host is not in hosts_require_tls, Exim may try to deliver the
+message unencrypted. It always does this if the response to STARTTLS is a 5xx
+code. For a temporary error code, or for a failure to negotiate a TLS session
+after a success response code, what happens is controlled by the 
+tls_tempfail_tryclear option of the smtp transport. If it is false, delivery to
+this host is deferred, and other hosts (if available) are tried. If it is true,
+Exim attempts to deliver unencrypted after a 4xx response to STARTTLS, and if
+STARTTLS is accepted, but the subsequent TLS negotiation fails, Exim closes the
+current connection (because it is in an unknown state), opens a new one to the
+same host, and then tries the delivery unencrypted.
+
+The tls_certificate and tls_privatekey options of the smtp transport provide
+the client with a certificate, which is passed to the server if it requests it.
+This is an optional thing for TLS connections, although either end may insist
+on it. If the server is Exim, it will request a certificate only if 
+tls_verify_hosts or tls_try_verify_hosts matches the client.
+
+Note: Do not use a certificate which has the OCSP-must-staple extension, for
+client use (they are usable for server use). As the TLS protocol has no means
+for the client to staple before TLS 1.3 it will result in failed connections.
+
+If the tls_verify_certificates option is set on the smtp transport, it
+specifies a collection of expected server certificates. These may be the system
+default set (depending on library version), a file, or (depending on library
+version) a directory. The client verifies the server's certificate against this
+collection, taking into account any revoked certificates that are in the list
+defined by tls_crl. Failure to verify fails the TLS connection unless either of
+the tls_verify_hosts or tls_try_verify_hosts options are set.
+
+The tls_verify_hosts and tls_try_verify_hosts options restrict certificate
+verification to the listed servers. Verification either must or need not
+succeed respectively.
+
+The tls_verify_cert_hostnames option lists hosts for which additional name
+checks are made on the server certificate. The match against this list is, as
+per other Exim usage, the IP for the host. That is most closely associated with
+the name on the DNS A (or AAAA) record for the host. However, the name that
+needs to be in the certificate is the one at the head of any CNAME chain
+leading to the A record. The option defaults to always checking.
+
+The smtp transport has two OCSP-related options: hosts_require_ocsp; a
+host-list for which a Certificate Status is requested and required for the
+connection to proceed. The default value is empty. hosts_request_ocsp; a
+host-list for which (additionally) a Certificate Status is requested (but not
+necessarily verified). The default value is "*" meaning that requests are made
+unless configured otherwise.
+
+The host(s) should also be in hosts_require_tls, and tls_verify_certificates
+configured for the transport, for OCSP to be relevant.
+
+If tls_require_ciphers is set on the smtp transport, it must contain a list of
+permitted cipher suites. If either of these checks fails, delivery to the
+current host is abandoned, and the smtp transport tries to deliver to
+alternative hosts, if any.
+
+Note: These options must be set in the smtp transport for Exim to use TLS when
+it is operating as a client. Exim does not assume that a server certificate
+(set by the global options of the same name) should also be used when operating
+as a client.
+
+All the TLS options in the smtp transport are expanded before use, with $host
+and $host_address containing the name and address of the server to which the
+client is connected. Forced failure of an expansion causes Exim to behave as if
+the relevant option were unset.
+
+Before an SMTP connection is established, the $tls_out_bits, $tls_out_cipher,
+$tls_out_peerdn and $tls_out_sni variables are emptied. (Until the first
+connection, they contain the values that were set when the message was
+received.) If STARTTLS is subsequently successfully obeyed, these variables are
+set to the relevant values for the outgoing connection.
+
+
+43.11 Caching of static client configuration items
+--------------------------------------------------
+
+If any of the transport configuration options tls_certificate, tls_privatekey
+and tls_crl have values with no expandable elements, then the associated
+information is loaded per smtp transport at daemon startup, at the start of a
+queue run, or on a command-line specified message delivery. It is made
+available to child processes forked for handling making SMTP connections.
+
+This caching is currently only supported under Linux.
+
+If caching is not possible, the load of the associated information is done at
+the startup of the TLS connection.
+
+The cache is invalidated in the daemon and reloaded after any changes to the
+directories containing files specified by these options.
+
+The information specified by the main option tls_verify_certificates is
+similarly cached so long as it specifies files explicitly or (under GnuTLS) is
+the string "system,cache". The latter case is not automatically invaludated; it
+is the operator's responsibility to arrange for a daemon restart any time the
+system certificate authority bundle is updated. A HUP signal is sufficient for
+this. The value "system" results in no caching under GnuTLS.
+
+The macro _HAVE_TLS_CA_CACHE will be defined if the suffix for "system" is
+acceptable in configurations for the Exim executavble.
+
+Caching of the system Certificate Authorities bundle can save siginificant time
+and processing on every TLS connection initiated by Exim.
+
+
+43.12 Use of TLS Server Name Indication
+---------------------------------------
+
+With TLS1.0 or above, there is an extension mechanism by which extra
+information can be included at various points in the protocol. One of these
+extensions, documented in RFC 6066 (and before that RFC 4366) is "Server Name
+Indication", commonly "SNI". This extension is sent by the client in the
+initial handshake, so that the server can examine the servername within and
+possibly choose to use different certificates and keys (and more) for this
+session.
+
+This is analogous to HTTP's "Host:" header, and is the main mechanism by which
+HTTPS-enabled web-sites can be virtual-hosted, many sites to one IP address.
+
+With SMTP to MX, there are the same problems here as in choosing the identity
+against which to validate a certificate: you can't rely on insecure DNS to
+provide the identity which you then cryptographically verify. So this will be
+of limited use in that environment.
+
+With SMTP to Submission, there is a well-defined hostname which clients are
+connecting to and can validate certificates against. Thus clients can choose to
+include this information in the TLS negotiation. If this becomes wide-spread,
+then hosters can choose to present different certificates to different clients.
+Or even negotiate different cipher suites.
+
+The tls_sni option on an SMTP transport is an expanded string; the result, if
+not empty, will be sent on a TLS session as part of the handshake. There's
+nothing more to it. Choosing a sensible value not derived insecurely is the
+only point of caution. The $tls_out_sni variable will be set to this string for
+the lifetime of the client connection (including during authentication).
+
+If DANE validated the connection attempt then the value of the tls_sni option
+is forced to the name of the destination host, after any MX- or
+CNAME-following.
+
+Except during SMTP client sessions, if $tls_in_sni is set then it is a string
+received from a client. It can be logged with the log_selector item "+tls_sni".
+
+If the string "tls_in_sni" appears in the main section's tls_certificate option
+(prior to expansion) then the following options will be re-expanded during TLS
+session handshake, to permit alternative values to be chosen:
+
+  * tls_certificate
+
+  * tls_crl
+
+  * tls_privatekey
+
+  * tls_verify_certificates
+
+  * tls_ocsp_file
+
+Great care should be taken to deal with matters of case, various injection
+attacks in the string ("../" or SQL), and ensuring that a valid filename can
+always be referenced; it is important to remember that $tls_in_sni is arbitrary
+unverified data provided prior to authentication. Further, the initial
+certificate is loaded before SNI has arrived, so an expansion for 
+tls_certificate must have a default which is used when $tls_in_sni is empty.
+
+The Exim developers are proceeding cautiously and so far no other TLS options
+are re-expanded.
+
+When Exim is built against OpenSSL, OpenSSL must have been built with support
+for TLS Extensions. This holds true for OpenSSL 1.0.0+ and 0.9.8+ with
+enable-tlsext in EXTRACONFIGURE. If you invoke openssl s_client -h and see
+"-servername" in the output, then OpenSSL has support.
+
+When Exim is built against GnuTLS, SNI support is available as of GnuTLS
+0.5.10. (Its presence predates the current API which Exim uses, so if Exim
+built, then you have SNI support).
+
+There is a TLS feature related to SNI called Application Layer Protocol Name
+(ALPN). This is intended to declare, or select, what protocol layer will be
+using a TLS connection. The client for the connection proposes a set of
+protocol names, and the server responds with a selected one. It is not, as of
+2021, commonly used for SMTP connections. However, to guard against misirected
+or malicious use of web clients (which often do use ALPN) against MTA ports,
+Exim by default check that there is no incompatible ALPN specified by a client
+for a TLS connection. If there is, the connection is rejected.
+
+As a client Exim does not supply ALPN by default. The behaviour of both client
+and server can be configured using the options tls_alpn and hosts_require_alpn.
+There are no variables providing observability. Some feature-specific logging
+may appear on denied connections, but this depends on the behavious of the peer
+(not all peers can send a feature-specific TLS Alert).
+
+This feature is available when Exim is built with OpenSSL 1.1.0 or later or
+GnuTLS 3.2.0 or later; the macro _HAVE_TLS_ALPN will be defined when this is
+so.
+
+
+43.13 Multiple messages on the same encrypted TCP/IP connection
+---------------------------------------------------------------
+
+Exim sends multiple messages down the same TCP/IP connection by starting up an
+entirely new delivery process for each message, passing the socket from one
+process to the next. This implementation does not fit well with the use of TLS,
+because there is quite a lot of state information associated with a TLS
+connection, not just a socket identification. Passing all the state information
+to a new process is not feasible. Consequently, for sending using TLS Exim
+starts an additional proxy process for handling the encryption, piping the
+unencrypted data stream from and to the delivery processes.
+
+An older mode of operation can be enabled on a per-host basis by the 
+hosts_noproxy_tls option on the smtp transport. If the host matches this list
+the proxy process described above is not used; instead Exim shuts down an
+existing TLS session being run by the delivery process before passing the
+socket to a new process. The new process may then try to start a new TLS
+session, and if successful, may try to re-authenticate if AUTH is in use,
+before sending the next message.
+
+The RFC is not clear as to whether or not an SMTP session continues in clear
+after TLS has been shut down, or whether TLS may be restarted again later, as
+just described. However, if the server is Exim, this shutdown and
+reinitialization works. It is not known which (if any) other servers operate
+successfully if the client closes a TLS session and continues with unencrypted
+SMTP, but there are certainly some that do not work. For such servers, Exim
+should not pass the socket to another process, because the failure of the
+subsequent attempt to use it would cause Exim to record a temporary host error,
+and delay other deliveries to that host.
+
+To test for this case, Exim sends an EHLO command to the server after closing
+down the TLS session. If this fails in any way, the connection is closed
+instead of being passed to a new delivery process, but no retry information is
+recorded.
+
+There is also a manual override; you can set hosts_nopass_tls on the smtp
+transport to match those hosts for which Exim should not pass connections to
+new processes if TLS has been used.
+
+
+43.14 Certificates and all that
+-------------------------------
+
+In order to understand fully how TLS works, you need to know about
+certificates, certificate signing, and certificate authorities. This is a large
+topic and an introductory guide is unsuitable for the Exim reference manual, so
+instead we provide pointers to existing documentation.
+
+The Apache web-server was for a long time the canonical guide, so their
+documentation is a good place to start; their SSL module's Introduction
+document is currently at
+
+https://httpd.apache.org/docs/current/ssl/ssl_intro.html
+
+and their FAQ is at
+
+https://httpd.apache.org/docs/current/ssl/ssl_faq.html
+
+Eric Rescorla's book, SSL and TLS, published by Addison-Wesley (ISBN
+0-201-61598-3) in 2001, contains both introductory and more in-depth
+descriptions. More recently Ivan Risti?'s book Bulletproof SSL and TLS,
+published by Feisty Duck (ISBN 978-1907117046) in 2013 is good. Ivan is the
+author of the popular TLS testing tools at https://www.ssllabs.com/.
+
+
+43.15 Certificate chains
+------------------------
+
+A file named by tls_certificate may contain more than one certificate. This is
+useful in the case where the certificate that is being sent is validated by an
+intermediate certificate which the other end does not have. Multiple
+certificates must be in the correct order in the file. First the host's
+certificate itself, then the first intermediate certificate to validate the
+issuer of the host certificate, then the next intermediate certificate to
+validate the issuer of the first intermediate certificate, and so on, until
+finally (optionally) the root certificate. The root certificate must already be
+trusted by the recipient for validation to succeed, of course, but if it's not
+preinstalled, sending the root certificate along with the rest makes it
+available for the user to install if the receiving end is a client MUA that can
+interact with a user.
+
+Note that certificates using MD5 are unlikely to work on today's Internet; even
+if your libraries allow loading them for use in Exim when acting as a server,
+increasingly clients will not accept such certificates. The error diagnostics
+in such a case can be frustratingly vague.
+
+
+43.16 Self-signed certificates
+------------------------------
+
+You can create a self-signed certificate using the req command provided with
+OpenSSL, like this:
+
+openssl req -x509 -newkey rsa:1024 -keyout file1 -out file2 \
+            -days 9999 -nodes
+
+file1 and file2 can be the same file; the key and the certificate are delimited
+and so can be identified independently. The -days option specifies a period for
+which the certificate is valid. The -nodes option is important: if you do not
+set it, the key is encrypted with a passphrase that you are prompted for, and
+any use that is made of the key causes more prompting for the passphrase. This
+is not helpful if you are going to use this certificate and key in an MTA,
+where prompting is not possible.
+
+NB: we are now past the point where 9999 days takes us past the 32-bit Unix
+epoch. If your system uses unsigned time_t (most do) and is 32-bit, then the
+above command might produce a date in the past. Think carefully about the
+lifetime of the systems you're deploying, and either reduce the duration of the
+certificate or reconsider your platform deployment. (At time of writing,
+reducing the duration is the most likely choice, but the inexorable progression
+of time takes us steadily towards an era where this will not be a sensible
+resolution).
+
+A self-signed certificate made in this way is sufficient for testing, and may
+be adequate for all your requirements if you are mainly interested in
+encrypting transfers, and not in secure identification.
+
+However, many clients require that the certificate presented by the server be a
+user (also called "leaf" or "site") certificate, and not a self-signed
+certificate. In this situation, the self-signed certificate described above
+must be installed on the client host as a trusted root certification authority
+(CA), and the certificate used by Exim must be a user certificate signed with
+that self-signed certificate.
+
+For information on creating self-signed CA certificates and using them to sign
+user certificates, see the General implementation overview chapter of the
+Open-source PKI book, available online at https://sourceforge.net/projects/
+ospkibook/.
+
+
+43.17 TLS Resumption
+--------------------
+
+TLS Session Resumption for TLS 1.2 and TLS 1.3 connections can be used (defined
+in RFC 5077 for 1.2). The support for this requires GnuTLS 3.6.3 or OpenSSL
+1.1.1 (or later).
+
+Session resumption (this is the "stateless" variant) involves the server
+sending a "session ticket" to the client on one connection, which can be stored
+by the client and used for a later session. The ticket contains sufficient
+state for the server to reconstruct the TLS session, avoiding some expensive
+crypto calculation and (on TLS1.2) one full packet roundtrip time.
+
+  * Operational cost/benefit:
+
+    The extra data being transmitted costs a minor amount, and the client has
+    extra costs in storing and retrieving the data.
+
+    In the Exim/Gnutls implementation the extra cost on an initial connection
+    which is TLS1.2 over a loopback path is about 6ms on 2017-laptop class
+    hardware. The saved cost on a subsequent connection is about 4ms; three or
+    more connections become a net win. On longer network paths, two or more
+    connections will have an average lower startup time thanks to the one saved
+    packet roundtrip. TLS1.3 will save the crypto cpu costs but not any packet
+    roundtrips.
+
+    Since a new hints DB is used on the TLS client, the hints DB maintenance
+    should be updated to additionally handle "tls".
+
+  * Security aspects:
+
+    The session ticket is encrypted, but is obviously an additional security
+    vulnarability surface. An attacker able to decrypt it would have access all
+    connections using the resumed session. The session ticket encryption key is
+    not committed to storage by the server and is rotated regularly (OpenSSL:
+    1hr, and one previous key is used for overlap; GnuTLS 6hr but does not
+    specify any overlap). Tickets have limited lifetime (2hr, and new ones
+    issued after 1hr under OpenSSL. GnuTLS 2hr, appears to not do overlap).
+
+    There is a question-mark over the security of the Diffie-Helman parameters
+    used for session negotiation.
+
+  * Observability:
+
+    The log_selector "tls_resumption" appends an asterisk to the tls_cipher "X=
+    " element.
+
+    The variables $tls_in_resumption and $tls_out_resumption have bits 0-4
+    indicating respectively support built, client requested ticket, client
+    offered session, server issued ticket, resume used. A suitable decode list
+    is provided in the builtin macro _RESUME_DECODE for in listextract
+    expansions.
+
+  * Control:
+
+    The tls_resumption_hosts main option specifies a hostlist for which exim,
+    operating as a server, will offer resumption to clients. Current best
+    practice is to not offer the feature to MUA connection. Commonly this can
+    be done like this:
+
+    tls_resumption_hosts = ${if inlist {$received_port}{587:465} {:}{*}}
+
+    If the peer host matches the list after expansion then resumption is
+    offered and/or accepted.
+
+    The tls_resumption_hosts smtp transport option performs the equivalent
+    function for operation as a client. If the peer host matches the list after
+    expansion then resumption is attempted (if a stored session is available)
+    or the information stored (if supplied by the peer).
+
+  * Issues:
+
+    In a resumed session:
+
+      + The variables $tls_{in,out}_cipher will have values different to the
+        original (under GnuTLS).
+
+      + The variables $tls_{in,out}_ocsp will be "not requested" or "no
+        response", and the hosts_require_ocsp smtp trasnport option will fail.
+
+
+43.18 DANE
+----------
+
+DNS-based Authentication of Named Entities, as applied to SMTP over TLS,
+provides assurance to a client that it is actually talking to the server it
+wants to rather than some attacker operating a Man In The Middle (MITM)
+operation. The latter can terminate the TLS connection you make, and make
+another one to the server (so both you and the server still think you have an
+encrypted connection) and, if one of the "well known" set of Certificate
+Authorities has been suborned - something which *has* been seen already (2014),
+a verifiable certificate (if you're using normal root CAs, eg. the Mozilla set,
+as your trust anchors).
+
+What DANE does is replace the CAs with the DNS as the trust anchor. The
+assurance is limited to a) the possibility that the DNS has been suborned, b)
+mistakes made by the admins of the target server. The attack surface presented
+by (a) is thought to be smaller than that of the set of root CAs.
+
+It also allows the server to declare (implicitly) that connections to it should
+use TLS. An MITM could simply fail to pass on a server's STARTTLS.
+
+DANE scales better than having to maintain (and communicate via side-channel)
+copies of server certificates for every possible target server. It also scales
+(slightly) better than having to maintain on an SMTP client a copy of the
+standard CAs bundle. It also means not having to pay a CA for certificates.
+
+DANE requires a server operator to do three things: 1) run DNSSEC. This
+provides assurance to clients that DNS lookups they do for the server have not
+been tampered with. The domain MX record applying to this server, its A record,
+its TLSA record and any associated CNAME records must all be covered by DNSSEC.
+2) add TLSA DNS records. These say what the server certificate for a TLS
+connection should be. 3) offer a server certificate, or certificate chain, in
+TLS connections which is is anchored by one of the TLSA records.
+
+There are no changes to Exim specific to server-side operation of DANE. Support
+for client-side operation of DANE can be included at compile time by defining
+SUPPORT_DANE=yes in Local/Makefile. If it has been included, the macro
+"_HAVE_DANE" will be defined.
+
+A TLSA record consist of 4 fields, the "Certificate Usage", the "Selector", the
+"Matching type", and the "Certificate Association Data". For a detailed
+description of the TLSA record see RFC 7671.
+
+The TLSA record for the server may have "Certificate Usage" (1st) field of
+DANE-TA(2) or DANE-EE(3). These are the "Trust Anchor" and "End Entity"
+variants. The latter specifies the End Entity directly, i.e. the certificate
+involved is that of the server (and if only DANE-EE is used then it should be
+the sole one transmitted during the TLS handshake); this is appropriate for a
+single system, using a self-signed certificate. DANE-TA usage is effectively
+declaring a specific CA to be used; this might be a private CA or a public,
+well-known one. A private CA at simplest is just a self-signed certificate
+(with certain attributes) which is used to sign server certificates, but
+running one securely does require careful arrangement. With DANE-TA, as
+implemented in Exim and commonly in other MTAs, the server TLS handshake must
+transmit the entire certificate chain from CA to server-certificate. DANE-TA is
+commonly used for several services and/or servers, each having a TLSA
+query-domain CNAME record, all of which point to a single TLSA record. DANE-TA
+and DANE-EE can both be used together.
+
+Our recommendation is to use DANE with a certificate from a public CA, because
+this enables a variety of strategies for remote clients to verify your
+certificate. You can then publish information both via DANE and another
+technology, "MTA-STS", described below.
+
+When you use DANE-TA to publish trust anchor information, you ask entities
+outside your administrative control to trust the Certificate Authority for
+connections to you. If using a private CA then you should expect others to
+still apply the technical criteria they'd use for a public CA to your
+certificates. In particular, you should probably try to follow current best
+practices for CA operation around hash algorithms and key sizes. Do not expect
+other organizations to lower their security expectations just because a
+particular profile might be reasonable for your own internal use.
+
+When this text was last updated, this in practice means to avoid use of SHA-1
+and MD5; if using RSA to use key sizes of at least 2048 bits (and no larger
+than 4096, for interoperability); to use keyUsage fields correctly; to use
+random serial numbers. The list of requirements is subject to change as best
+practices evolve. If you're not already using a private CA, or it doesn't meet
+these requirements, then we encourage you to avoid all these issues and use a
+public CA such as Let's Encrypt instead.
+
+The TLSA record should have a "Selector" (2nd) field of SPKI(1) and a "Matching
+Type" (3rd) field of SHA2-512(2).
+
+For the "Certificate Authority Data" (4th) field, commands like
+
+  openssl x509 -pubkey -noout <certificate.pem \
+  | openssl rsa -outform der -pubin 2>/dev/null \
+  | openssl sha512 \
+  | awk '{print $2}'
+
+are workable to create a hash of the certificate's public key.
+
+An example TLSA record for DANE-EE(3), SPKI(1), and SHA-512 (2) looks like
+
+  _25._tcp.mail.example.com. TLSA 3 1 2 8BA8A336E...
+
+At the time of writing, https://www.huque.com/bin/gen_tlsa is useful for
+quickly generating TLSA records.
+
+For use with the DANE-TA model, server certificates must have a correct name
+(SubjectName or SubjectAltName).
+
+The Certificate issued by the CA published in the DANE-TA model should be
+issued using a strong hash algorithm. Exim, and importantly various other MTAs
+sending to you, will not re-enable hash algorithms which have been disabled by
+default in TLS libraries. This means no MD5 and no SHA-1. SHA2-256 is the
+minimum for reliable interoperability (and probably the maximum too, in 2018).
+
+The use of OCSP-stapling should be considered, allowing for fast revocation of
+certificates (which would otherwise be limited by the DNS TTL on the TLSA
+records). However, this is likely to only be usable with DANE-TA. NOTE: the
+default of requesting OCSP for all hosts is modified iff DANE is in use, to:
+
+  hosts_request_ocsp = ${if or { {= {0}{$tls_out_tlsa_usage}} \
+                                 {= {4}{$tls_out_tlsa_usage}} } \
+                         {*}{}}
+
+The (new) variable $tls_out_tlsa_usage is a bitfield with numbered bits set for
+TLSA record usage codes. The zero above means DANE was not in use, the four
+means that only DANE-TA usage TLSA records were found. If the definition of 
+hosts_request_ocsp includes the string "tls_out_tlsa_usage", they are
+re-expanded in time to control the OCSP request.
+
+This modification of hosts_request_ocsp is only done if it has the default
+value of "*". Admins who change it, and those who use hosts_require_ocsp,
+should consider the interaction with DANE in their OCSP settings.
+
+For client-side DANE there are three new smtp transport options, hosts_try_dane
+, hosts_require_dane and dane_require_tls_ciphers. The "require" variant will
+result in failure if the target host is not DNSSEC-secured. To get
+DNSSEC-secured hostname resolution, use the dnssec_request_domains router or
+transport option.
+
+DANE will only be usable if the target host has DNSSEC-secured MX, A and TLSA
+records.
+
+A TLSA lookup will be done if either of the above options match and the
+host-lookup succeeded using DNSSEC. If a TLSA lookup is done and succeeds, a
+DANE-verified TLS connection will be required for the host. If it does not, the
+host will not be used; there is no fallback to non-DANE or non-TLS.
+
+If DANE is requested and usable, then the TLS cipher list configuration prefers
+to use the option dane_require_tls_ciphers and falls back to 
+tls_require_ciphers only if that is unset. This lets you configure "decent
+crypto" for DANE and "better than nothing crypto" as the default. Note though
+that while GnuTLS lets the string control which versions of TLS/SSL will be
+negotiated, OpenSSL does not and you're limited to ciphersuite constraints.
+
+If DANE is requested and useable (see above) the following transport options
+are ignored:
+
+  hosts_require_tls
+  tls_verify_hosts
+  tls_try_verify_hosts
+  tls_verify_certificates
+  tls_crl
+  tls_verify_cert_hostnames
+  tls_sni
+
+If DANE is not usable, whether requested or not, and CA-anchored verification
+evaluation is wanted, the above variables should be set appropriately.
+
+The router and transport option dnssec_request_domains must not be set to
+"never", and dnssec_require_domains is ignored.
+
+If verification was successful using DANE then the "CV" item in the delivery
+log line will show as "CV=dane".
+
+There is a new variable $tls_out_dane which will have "yes" if verification
+succeeded using DANE and "no" otherwise (only useful in combination with
+events; see 61), and a new variable $tls_out_tlsa_usage (detailed above).
+
+An event (see 61) of type "dane:fail" will be raised on failures to achieve
+DANE-verified connection, if one was either requested and offered, or required.
+This is intended to support TLS-reporting as defined in https://tools.ietf.org/
+html/draft-ietf-uta-smtp-tlsrpt-17. The $event_data will be one of the Result
+Types defined in Section 4.3 of that document.
+
+Under GnuTLS, DANE is only supported from version 3.0.0 onwards.
+
+DANE is specified in published RFCs and decouples certificate authority trust
+selection from a "race to the bottom" of "you must trust everything for mail to
+get through". There is an alternative technology called MTA-STS, which instead
+publishes MX trust anchor information on an HTTPS website. At the time this
+text was last updated, MTA-STS was still a draft, not yet an RFC. Exim has no
+support for MTA-STS as a client, but Exim mail server operators can choose to
+publish information describing their TLS configuration using MTA-STS to let
+those clients who do use that protocol derive trust information.
+
+The MTA-STS design requires a certificate from a public Certificate Authority
+which is recognized by clients sending to you. That selection of which CAs are
+trusted by others is outside your control.
+
+The most interoperable course of action is probably to use Let's Encrypt, with
+automated certificate renewal; to publish the anchor information in
+DNSSEC-secured DNS via TLSA records for DANE clients (such as Exim and Postfix)
+and to publish anchor information for MTA-STS as well. This is what is done for
+the exim.org domain itself (with caveats around occasionally broken MTA-STS
+because of incompatible specification changes prior to reaching RFC status).
+
+
+
+===============================================================================
+44. ACCESS CONTROL LISTS
+
+Access Control Lists (ACLs) are defined in a separate section of the runtime
+configuration file, headed by "begin acl". Each ACL definition starts with a
+name, terminated by a colon. Here is a complete ACL section that contains just
+one very small ACL:
+
+begin acl
+small_acl:
+  accept   hosts = one.host.only
+
+You can have as many lists as you like in the ACL section, and the order in
+which they appear does not matter. The lists are self-terminating.
+
+The majority of ACLs are used to control Exim's behaviour when it receives
+certain SMTP commands. This applies both to incoming TCP/IP connections, and
+when a local process submits a message using SMTP by specifying the -bs option.
+The most common use is for controlling which recipients are accepted in
+incoming messages. In addition, you can define an ACL that is used to check
+local non-SMTP messages. The default configuration file contains an example of
+a realistic ACL for checking RCPT commands. This is discussed in chapter 7.
+
+
+44.1 Testing ACLs
+-----------------
+
+The -bh command line option provides a way of testing your ACL configuration
+locally by running a fake SMTP session with which you interact.
+
+
+44.2 Specifying when ACLs are used
+----------------------------------
+
+In order to cause an ACL to be used, you have to name it in one of the relevant
+options in the main part of the configuration. These options are: 
+
+    acl_not_smtp       ACL for non-SMTP messages
+    acl_not_smtp_mime  ACL for non-SMTP MIME parts
+    acl_not_smtp_start ACL at start of non-SMTP message
+    acl_smtp_auth      ACL for AUTH
+    acl_smtp_connect   ACL for start of SMTP connection
+    acl_smtp_data      ACL after DATA is complete
+    acl_smtp_data_prdr ACL for each recipient, after DATA is complete
+    acl_smtp_dkim      ACL for each DKIM signer
+    acl_smtp_etrn      ACL for ETRN
+    acl_smtp_expn      ACL for EXPN
+    acl_smtp_helo      ACL for HELO or EHLO
+    acl_smtp_mail      ACL for MAIL
+    acl_smtp_mailauth  ACL for the AUTH parameter of MAIL
+    acl_smtp_mime      ACL for content-scanning MIME parts
+    acl_smtp_notquit   ACL for non-QUIT terminations
+    acl_smtp_predata   ACL at start of DATA command
+    acl_smtp_quit      ACL for QUIT
+    acl_smtp_rcpt      ACL for RCPT
+    acl_smtp_starttls  ACL for STARTTLS
+    acl_smtp_vrfy      ACL for VRFY
+
+For example, if you set
+
+acl_smtp_rcpt = small_acl
+
+the little ACL defined above is used whenever Exim receives a RCPT command in
+an SMTP dialogue. The majority of policy tests on incoming messages can be done
+when RCPT commands arrive. A rejection of RCPT should cause the sending MTA to
+give up on the recipient address contained in the RCPT command, whereas
+rejection at other times may cause the client MTA to keep on trying to deliver
+the message. It is therefore recommended that you do as much testing as
+possible at RCPT time.
+
+
+44.3 The non-SMTP ACLs
+----------------------
+
+The non-SMTP ACLs apply to all non-interactive incoming messages, that is, they
+apply to batched SMTP as well as to non-SMTP messages. (Batched SMTP is not
+really SMTP.) Many of the ACL conditions (for example, host tests, and tests on
+the state of the SMTP connection such as encryption and authentication) are not
+relevant and are forbidden in these ACLs. However, the sender and recipients
+are known, so the senders and sender_domains conditions and the $sender_address
+and $recipients variables can be used. Variables such as $authenticated_sender
+are also available. You can specify added header lines in any of these ACLs.
+
+The acl_not_smtp_start ACL is run right at the start of receiving a non-SMTP
+message, before any of the message has been read. (This is the analogue of the 
+acl_smtp_predata ACL for SMTP input.) In the case of batched SMTP input, it
+runs after the DATA command has been reached. The result of this ACL is
+ignored; it cannot be used to reject a message. If you really need to, you
+could set a value in an ACL variable here and reject based on that in the 
+acl_not_smtp ACL. However, this ACL can be used to set controls, and in
+particular, it can be used to set
+
+control = suppress_local_fixups
+
+This cannot be used in the other non-SMTP ACLs because by the time they are
+run, it is too late.
+
+The acl_not_smtp_mime ACL is available only when Exim is compiled with the
+content-scanning extension. For details, see chapter 45.
+
+The acl_not_smtp ACL is run just before the local_scan() function. Any kind of
+rejection is treated as permanent, because there is no way of sending a
+temporary error for these kinds of message.
+
+
+44.4 The SMTP connect ACL
+-------------------------
+
+The ACL test specified by acl_smtp_connect happens at the start of an SMTP
+session, after the test specified by host_reject_connection (which is now an
+anomaly) and any TCP Wrappers testing (if configured). If the connection is
+accepted by an accept verb that has a message modifier, the contents of the
+message override the banner message that is otherwise specified by the 
+smtp_banner option.
+
+For tls-on-connect connections, the ACL is run after the TLS connection is
+accepted (however, host_reject_connection is tested before).
+
+
+44.5 The EHLO/HELO ACL
+----------------------
+
+The ACL test specified by acl_smtp_helo happens when the client issues an EHLO
+or HELO command, after the tests specified by helo_accept_junk_hosts, 
+helo_allow_chars, helo_verify_hosts, and helo_try_verify_hosts. Note that a
+client may issue more than one EHLO or HELO command in an SMTP session, and
+indeed is required to issue a new EHLO or HELO after successfully setting up
+encryption following a STARTTLS command.
+
+Note also that a deny neither forces the client to go away nor means that mail
+will be refused on the connection. Consider checking for $sender_helo_name
+being defined in a MAIL or RCPT ACL to do that.
+
+If the command is accepted by an accept verb that has a message modifier, the
+message may not contain more than one line (it will be truncated at the first
+newline and a panic logged if it does). Such a message cannot affect the EHLO
+options that are listed on the second and subsequent lines of an EHLO response.
+
+
+44.6 The DATA ACLs
+------------------
+
+Two ACLs are associated with the DATA command, because it is two-stage command,
+with two responses being sent to the client. When the DATA command is received,
+the ACL defined by acl_smtp_predata is obeyed. This gives you control after all
+the RCPT commands, but before the message itself is received. It offers the
+opportunity to give a negative response to the DATA command before the data is
+transmitted. Header lines added by MAIL or RCPT ACLs are not visible at this
+time, but any that are defined here are visible when the acl_smtp_data ACL is
+run.
+
+You cannot test the contents of the message, for example, to verify addresses
+in the headers, at RCPT time or when the DATA command is received. Such tests
+have to appear in the ACL that is run after the message itself has been
+received, before the final response to the DATA command is sent. This is the
+ACL specified by acl_smtp_data, which is the second ACL that is associated with
+the DATA command.
+
+If CHUNKING was advertised and a BDAT command sequence is received, the 
+acl_smtp_predata ACL is not run. The acl_smtp_data is run after the last BDAT
+command and all of the data specified is received.
+
+For both of these ACLs, it is not possible to reject individual recipients. An
+error response rejects the entire message. Unfortunately, it is known that some
+MTAs do not treat hard (5xx) responses to the DATA command (either before or
+after the data) correctly - they keep the message on their queues and try again
+later, but that is their problem, though it does waste some of your resources.
+
+The acl_smtp_data ACL is run after the acl_smtp_data_prdr, the acl_smtp_dkim
+and the acl_smtp_mime ACLs.
+
+
+44.7 The SMTP DKIM ACL
+----------------------
+
+The acl_smtp_dkim ACL is available only when Exim is compiled with DKIM support
+enabled (which is the default).
+
+The ACL test specified by acl_smtp_dkim happens after a message has been
+received, and is executed for each DKIM signature found in a message. If not
+otherwise specified, the default action is to accept.
+
+This ACL is evaluated before acl_smtp_mime and acl_smtp_data.
+
+For details on the operation of DKIM, see section 58.1.
+
+
+44.8 The SMTP MIME ACL
+----------------------
+
+The acl_smtp_mime option is available only when Exim is compiled with the
+content-scanning extension. For details, see chapter 45.
+
+This ACL is evaluated after acl_smtp_dkim but before acl_smtp_data.
+
+
+44.9 The SMTP PRDR ACL
+----------------------
+
+The acl_smtp_data_prdr ACL is available only when Exim is compiled with PRDR
+support enabled (which is the default). It becomes active only when the PRDR
+feature is negotiated between client and server for a message, and more than
+one recipient has been accepted.
+
+The ACL test specified by acl_smtp_data_prdr happens after a message has been
+received, and is executed once for each recipient of the message with
+$local_part and $domain valid. The test may accept, defer or deny for
+individual recipients. The acl_smtp_data will still be called after this ACL
+and can reject the message overall, even if this ACL has accepted it for some
+or all recipients.
+
+PRDR may be used to support per-user content filtering. Without it one must
+defer any recipient after the first that has a different content-filter
+configuration. With PRDR, the RCPT-time check for this can be disabled when the
+variable $prdr_requested is "yes". Any required difference in behaviour of the
+main DATA-time ACL should however depend on the PRDR-time ACL having run, as
+Exim will avoid doing so in some situations (e.g. single-recipient mails).
+
+See also the prdr_enable global option and the hosts_try_prdr smtp transport
+option.
+
+This ACL is evaluated after acl_smtp_dkim but before acl_smtp_data. If the ACL
+is not defined, processing completes as if the feature was not requested by the
+client.
+
+
+44.10 The QUIT ACL
+------------------
+
+The ACL for the SMTP QUIT command is anomalous, in that the outcome of the ACL
+does not affect the response code to QUIT, which is always 221. Thus, the ACL
+does not in fact control any access. For this reason, it may only accept or
+warn as its final result.
+
+This ACL can be used for tasks such as custom logging at the end of an SMTP
+session. For example, you can use ACL variables in other ACLs to count
+messages, recipients, etc., and log the totals at QUIT time using one or more 
+logwrite modifiers on a warn verb.
+
+Warning: Only the $acl_cx variables can be used for this, because the $acl_mx
+variables are reset at the end of each incoming message.
+
+You do not need to have a final accept, but if you do, you can use a message
+modifier to specify custom text that is sent as part of the 221 response to
+QUIT.
+
+This ACL is run only for a "normal" QUIT. For certain kinds of disastrous
+failure (for example, failure to open a log file, or when Exim is bombing out
+because it has detected an unrecoverable error), all SMTP commands from the
+client are given temporary error responses until QUIT is received or the
+connection is closed. In these special cases, the QUIT ACL does not run.
+
+
+44.11 The not-QUIT ACL
+----------------------
+
+The not-QUIT ACL, specified by acl_smtp_notquit, is run in most cases when an
+SMTP session ends without sending QUIT. However, when Exim itself is in bad
+trouble, such as being unable to write to its log files, this ACL is not run,
+because it might try to do things (such as write to log files) that make the
+situation even worse.
+
+Like the QUIT ACL, this ACL is provided to make it possible to do customized
+logging or to gather statistics, and its outcome is ignored. The delay modifier
+is forbidden in this ACL, and the only permitted verbs are accept and warn.
+
+When the not-QUIT ACL is running, the variable $smtp_notquit_reason is set to a
+string that indicates the reason for the termination of the SMTP connection.
+The possible values are:
+
+    "acl-drop"              Another ACL issued a drop command
+    "bad-commands"          Too many unknown or non-mail commands
+    "command-timeout"       Timeout while reading SMTP commands
+    "connection-lost"       The SMTP connection has been lost
+    "data-timeout"          Timeout while reading message data
+    "local-scan-error"      The local_scan() function crashed
+    "local-scan-timeout"    The local_scan() function timed out
+    "signal-exit"           SIGTERM or SIGINT
+    "synchronization-error" SMTP synchronization error
+    "tls-failed"            TLS failed to start
+
+In most cases when an SMTP connection is closed without having received QUIT,
+Exim sends an SMTP response message before actually closing the connection.
+With the exception of the "acl-drop" case, the default message can be
+overridden by the message modifier in the not-QUIT ACL. In the case of a drop
+verb in another ACL, it is the message from the other ACL that is used.
+
+
+44.12 Finding an ACL to use
+---------------------------
+
+The value of an acl_smtp_xxx option is expanded before use, so you can use
+different ACLs in different circumstances. For example,
+
+acl_smtp_rcpt = ${if ={25}{$interface_port} \
+                     {acl_check_rcpt} {acl_check_rcpt_submit} }
+
+In the default configuration file there are some example settings for providing
+an RFC 4409 message "submission" service on port 587 and an RFC 8314
+"submissions" service on port 465. You can use a string expansion like this to
+choose an ACL for MUAs on these ports which is more appropriate for this
+purpose than the default ACL on port 25.
+
+The expanded string does not have to be the name of an ACL in the configuration
+file; there are other possibilities. Having expanded the string, Exim searches
+for an ACL as follows:
+
+  * If the string begins with a slash, Exim uses it as a filename, and reads
+    its contents as an ACL. The lines are processed in the same way as lines in
+    the Exim configuration file. In particular, continuation lines are
+    supported, blank lines are ignored, as are lines whose first non-whitespace
+    character is "#". If the file does not exist or cannot be read, an error
+    occurs (typically causing a temporary failure of whatever caused the ACL to
+    be run). For example:
+
+    acl_smtp_data = /etc/acls/\
+      ${lookup{$sender_host_address}lsearch\
+      {/etc/acllist}{$value}{default}}
+
+    This looks up an ACL file to use on the basis of the host's IP address,
+    falling back to a default if the lookup fails. If an ACL is successfully
+    read from a file, it is retained in memory for the duration of the Exim
+    process, so that it can be re-used without having to re-read the file.
+
+  * If the string does not start with a slash, and does not contain any spaces,
+    Exim searches the ACL section of the configuration for an ACL whose name
+    matches the string.
+
+  * If no named ACL is found, or if the string contains spaces, Exim parses the
+    string as an inline ACL. This can save typing in cases where you just want
+    to have something like
+
+    acl_smtp_vrfy = accept
+
+    in order to allow free use of the VRFY command. Such a string may contain
+    newlines; it is processed in the same way as an ACL that is read from a
+    file.
+
+
+44.13 ACL return codes
+----------------------
+
+Except for the QUIT ACL, which does not affect the SMTP return code (see
+section 44.10 above), the result of running an ACL is either "accept" or
+"deny", or, if some test cannot be completed (for example, if a database is
+down), "defer". These results cause 2xx, 5xx, and 4xx return codes,
+respectively, to be used in the SMTP dialogue. A fourth return, "error", occurs
+when there is an error such as invalid syntax in the ACL. This also causes a 4
+xx return code.
+
+For the non-SMTP ACL, "defer" and "error" are treated in the same way as
+"deny", because there is no mechanism for passing temporary errors to the
+submitters of non-SMTP messages.
+
+ACLs that are relevant to message reception may also return "discard". This has
+the effect of "accept", but causes either the entire message or an individual
+recipient address to be discarded. In other words, it is a blackholing
+facility. Use it with care.
+
+If the ACL for MAIL returns "discard", all recipients are discarded, and no ACL
+is run for subsequent RCPT commands. The effect of "discard" in a RCPT ACL is
+to discard just the one recipient address. If there are no recipients left when
+the message's data is received, the DATA ACL is not run. A "discard" return
+from the DATA or the non-SMTP ACL discards all the remaining recipients. The
+"discard" return is not permitted for the acl_smtp_predata ACL.
+
+If the ACL for VRFY returns "accept", a recipient verify (without callout) is
+done on the address and the result determines the SMTP response.
+
+The local_scan() function is always run, even if there are no remaining
+recipients; it may create new recipients.
+
+
+44.14 Unset ACL options
+-----------------------
+
+The default actions when any of the acl_xxx options are unset are not all the
+same. Note: These defaults apply only when the relevant ACL is not defined at
+all. For any defined ACL, the default action when control reaches the end of
+the ACL statements is "deny".
+
+For acl_smtp_quit and acl_not_smtp_start there is no default because these two
+are ACLs that are used only for their side effects. They cannot be used to
+accept or reject anything.
+
+For acl_not_smtp, acl_smtp_auth, acl_smtp_connect, acl_smtp_data, acl_smtp_helo
+, acl_smtp_mail, acl_smtp_mailauth, acl_smtp_mime, acl_smtp_predata, and 
+acl_smtp_starttls, the action when the ACL is not defined is "accept".
+
+For the others (acl_smtp_etrn, acl_smtp_expn, acl_smtp_rcpt, and acl_smtp_vrfy
+), the action when the ACL is not defined is "deny". This means that 
+acl_smtp_rcpt must be defined in order to receive any messages over an SMTP
+connection. For an example, see the ACL in the default configuration file.
+
+
+44.15 Data for message ACLs
+---------------------------
+
+When a MAIL or RCPT ACL, or either of the DATA ACLs, is running, the variables
+that contain information about the host and the message's sender (for example,
+$sender_host_address and $sender_address) are set, and can be used in ACL
+statements. In the case of RCPT (but not MAIL or DATA), $domain and $local_part
+are set from the argument address. The entire SMTP command is available in
+$smtp_command.
+
+When an ACL for the AUTH parameter of MAIL is running, the variables that
+contain information about the host are set, but $sender_address is not yet set.
+Section 33.2 contains a discussion of this parameter and how it is used.
+
+The $message_size variable is set to the value of the SIZE parameter on the
+MAIL command at MAIL, RCPT and pre-data time, or to -1 if that parameter is not
+given. The value is updated to the true message size by the time the final DATA
+ACL is run (after the message data has been received).
+
+The $rcpt_count variable increases by one for each RCPT command received. The
+$recipients_count variable increases by one each time a RCPT command is
+accepted, so while an ACL for RCPT is being processed, it contains the number
+of previously accepted recipients. At DATA time (for both the DATA ACLs),
+$rcpt_count contains the total number of RCPT commands, and $recipients_count
+contains the total number of accepted recipients.
+
+
+44.16 Data for non-message ACLs
+-------------------------------
+
+When an ACL is being run for AUTH, EHLO, ETRN, EXPN, HELO, STARTTLS, or VRFY,
+the remainder of the SMTP command line is placed in $smtp_command_argument, and
+the entire SMTP command is available in $smtp_command. These variables can be
+tested using a condition condition. For example, here is an ACL for use with
+AUTH, which insists that either the session is encrypted, or the CRAM-MD5
+authentication method is used. In other words, it does not permit
+authentication methods that use cleartext passwords on unencrypted connections.
+
+acl_check_auth:
+  accept encrypted = *
+  accept condition = ${if eq{${uc:$smtp_command_argument}}\
+                     {CRAM-MD5}}
+  deny   message   = TLS encryption or CRAM-MD5 required
+
+(Another way of applying this restriction is to arrange for the authenticators
+that use cleartext passwords not to be advertised when the connection is not
+encrypted. You can use the generic server_advertise_condition authenticator
+option to do this.)
+
+
+44.17 Format of an ACL
+----------------------
+
+An individual ACL consists of a number of statements. Each statement starts
+with a verb, optionally followed by a number of conditions and "modifiers".
+Modifiers can change the way the verb operates, define error and log messages,
+set variables, insert delays, and vary the processing of accepted messages.
+
+If all the conditions are met, the verb is obeyed. The same condition may be
+used (with different arguments) more than once in the same statement. This
+provides a means of specifying an "and" conjunction between conditions. For
+example:
+
+deny  dnslists = list1.example
+      dnslists = list2.example
+
+If there are no conditions, the verb is always obeyed. Exim stops evaluating
+the conditions and modifiers when it reaches a condition that fails. What
+happens then depends on the verb (and in one case, on a special modifier). Not
+all the conditions make sense at every testing point. For example, you cannot
+test a sender address in the ACL that is run for a VRFY command.
+
+
+44.18 ACL verbs
+---------------
+
+The ACL verbs are as follows:
+
+  * accept: If all the conditions are met, the ACL returns "accept". If any of
+    the conditions are not met, what happens depends on whether endpass appears
+    among the conditions (for syntax see below). If the failing condition is
+    before endpass, control is passed to the next ACL statement; if it is after
+    endpass, the ACL returns "deny". Consider this statement, used to check a
+    RCPT command:
+
+    accept domains = +local_domains
+           endpass
+           verify = recipient
+
+    If the recipient domain does not match the domains condition, control
+    passes to the next statement. If it does match, the recipient is verified,
+    and the command is accepted if verification succeeds. However, if
+    verification fails, the ACL yields "deny", because the failing condition is
+    after endpass.
+
+    The endpass feature has turned out to be confusing to many people, so its
+    use is not recommended nowadays. It is always possible to rewrite an ACL so
+    that endpass is not needed, and it is no longer used in the default
+    configuration.
+
+    If a message modifier appears on an accept statement, its action depends on
+    whether or not endpass is present. In the absence of endpass (when an 
+    accept verb either accepts or passes control to the next statement), 
+    message can be used to vary the message that is sent when an SMTP command
+    is accepted. For example, in a RCPT ACL you could have:
+
+    accept  <some conditions>
+            message = OK, I will allow you through today
+
+    You can specify an SMTP response code, optionally followed by an "extended
+    response code" at the start of the message, but the first digit must be the
+    same as would be sent by default, which is 2 for an accept verb.
+
+    If endpass is present in an accept statement, message specifies an error
+    message that is used when access is denied. This behaviour is retained for
+    backward compatibility, but current "best practice" is to avoid the use of 
+    endpass.
+
+  * defer: If all the conditions are true, the ACL returns "defer" which, in an
+    SMTP session, causes a 4xx response to be given. For a non-SMTP ACL, defer
+    is the same as deny, because there is no way of sending a temporary error.
+    For a RCPT command, defer is much the same as using a redirect router and
+    ":defer:" while verifying, but the defer verb can be used in any ACL, and
+    even for a recipient it might be a simpler approach.
+
+  * deny: If all the conditions are met, the ACL returns "deny". If any of the
+    conditions are not met, control is passed to the next ACL statement. For
+    example,
+
+    deny dnslists = blackholes.mail-abuse.org
+
+    rejects commands from hosts that are on a DNS black list.
+
+  * discard: This verb behaves like accept, except that it returns "discard"
+    from the ACL instead of "accept". It is permitted only on ACLs that are
+    concerned with receiving messages. When all the conditions are true, the
+    sending entity receives a "success" response. However, discard causes
+    recipients to be discarded. If it is used in an ACL for RCPT, just the one
+    recipient is discarded; if used for MAIL, DATA or in the non-SMTP ACL, all
+    the message's recipients are discarded. Recipients that are discarded
+    before DATA do not appear in the log line when the received_recipients log
+    selector is set.
+
+    If the log_message modifier is set when discard operates, its contents are
+    added to the line that is automatically written to the log. The message
+    modifier operates exactly as it does for accept.
+
+  * drop: This verb behaves like deny, except that an SMTP connection is
+    forcibly closed after the 5xx error message has been sent. For example:
+
+    drop   condition = ${if > {$rcpt_count}{20}}
+           message   = I don't take more than 20 RCPTs
+
+    There is no difference between deny and drop for the connect-time ACL. The
+    connection is always dropped after sending a 550 response.
+
+  * require: If all the conditions are met, control is passed to the next ACL
+    statement. If any of the conditions are not met, the ACL returns "deny".
+    For example, when checking a RCPT command,
+
+    require message = Sender did not verify
+            verify  = sender
+
+    passes control to subsequent statements only if the message's sender can be
+    verified. Otherwise, it rejects the command. Note the positioning of the 
+    message modifier, before the verify condition. The reason for this is
+    discussed in section 44.20.
+
+  * warn: If all the conditions are true, a line specified by the log_message
+    modifier is written to Exim's main log. Control always passes to the next
+    ACL statement. If any condition is false, the log line is not written. If
+    an identical log line is requested several times in the same message, only
+    one copy is actually written to the log. If you want to force duplicates to
+    be written, use the logwrite modifier instead.
+
+    If log_message is not present, a warn verb just checks its conditions and
+    obeys any "immediate" modifiers (such as control, set, logwrite, add_header
+    , and remove_header) that appear before the first failing condition. There
+    is more about adding header lines in section 44.24.
+
+    If any condition on a warn statement cannot be completed (that is, there is
+    some sort of defer), the log line specified by log_message is not written.
+    This does not include the case of a forced failure from a lookup, which is
+    considered to be a successful completion. After a defer, no further
+    conditions or modifiers in the warn statement are processed. The incident
+    is logged, and the ACL continues to be processed, from the next statement
+    onwards.
+
+    When one of the warn conditions is an address verification that fails, the
+    text of the verification failure message is in $acl_verify_message. If you
+    want this logged, you must set it up explicitly. For example:
+
+    warn   !verify = sender
+           log_message = sender verify failed: $acl_verify_message
+
+At the end of each ACL there is an implicit unconditional deny.
+
+As you can see from the examples above, the conditions and modifiers are
+written one to a line, with the first one on the same line as the verb, and
+subsequent ones on following lines. If you have a very long condition, you can
+continue it onto several physical lines by the usual backslash continuation
+mechanism. It is conventional to align the conditions vertically.
+
+
+44.19 ACL variables
+-------------------
+
+There are some special variables that can be set during ACL processing. They
+can be used to pass information between different ACLs, different invocations
+of the same ACL in the same SMTP connection, and between ACLs and the routers,
+transports, and filters that are used to deliver a message. The names of these
+variables must begin with $acl_c or $acl_m, followed either by a digit or an
+underscore, but the remainder of the name can be any sequence of alphanumeric
+characters and underscores that you choose. There is no limit on the number of
+ACL variables. The two sets act as follows:
+
+  * The values of those variables whose names begin with $acl_c persist
+    throughout an SMTP connection. They are never reset. Thus, a value that is
+    set while receiving one message is still available when receiving the next
+    message on the same SMTP connection.
+
+  * The values of those variables whose names begin with $acl_m persist only
+    while a message is being received. They are reset afterwards. They are also
+    reset by MAIL, RSET, EHLO, HELO, and after starting up a TLS session.
+
+When a message is accepted, the current values of all the ACL variables are
+preserved with the message and are subsequently made available at delivery
+time. The ACL variables are set by a modifier called set. For example:
+
+accept hosts = whatever
+       set acl_m4 = some value
+accept authenticated = *
+       set acl_c_auth = yes
+
+Note: A leading dollar sign is not used when naming a variable that is to be
+set. If you want to set a variable without taking any action, you can use a 
+warn verb without any other modifiers or conditions.
+
+What happens if a syntactically valid but undefined ACL variable is referenced
+depends on the setting of the strict_acl_vars option. If it is false (the
+default), an empty string is substituted; if it is true, an error is generated.
+
+Versions of Exim before 4.64 have a limited set of numbered variables, but
+their names are compatible, so there is no problem with upgrading.
+
+
+44.20 Condition and modifier processing
+---------------------------------------
+
+An exclamation mark preceding a condition negates its result. For example:
+
+deny   domains = *.dom.example
+      !verify  = recipient
+
+causes the ACL to return "deny" if the recipient domain ends in dom.example and
+the recipient address cannot be verified. Sometimes negation can be used on the
+right-hand side of a condition. For example, these two statements are
+equivalent:
+
+deny  hosts = !192.168.3.4
+deny !hosts =  192.168.3.4
+
+However, for many conditions (verify being a good example), only left-hand side
+negation of the whole condition is possible.
+
+The arguments of conditions and modifiers are expanded. A forced failure of an
+expansion causes a condition to be ignored, that is, it behaves as if the
+condition is true. Consider these two statements:
+
+accept  senders = ${lookup{$host_name}lsearch\
+                  {/some/file}{$value}fail}
+accept  senders = ${lookup{$host_name}lsearch\
+                  {/some/file}{$value}{}}
+
+Each attempts to look up a list of acceptable senders. If the lookup succeeds,
+the returned list is searched, but if the lookup fails the behaviour is
+different in the two cases. The fail in the first statement causes the
+condition to be ignored, leaving no further conditions. The accept verb
+therefore succeeds. The second statement, however, generates an empty list when
+the lookup fails. No sender can match an empty list, so the condition fails,
+and therefore the accept also fails.
+
+ACL modifiers appear mixed in with conditions in ACL statements. Some of them
+specify actions that are taken as the conditions for a statement are checked;
+others specify text for messages that are used when access is denied or a
+warning is generated. The control modifier affects the way an incoming message
+is handled.
+
+The positioning of the modifiers in an ACL statement is important, because the
+processing of a verb ceases as soon as its outcome is known. Only those
+modifiers that have already been encountered will take effect. For example,
+consider this use of the message modifier:
+
+require message = Can't verify sender
+        verify  = sender
+        message = Can't verify recipient
+        verify  = recipient
+        message = This message cannot be used
+
+If sender verification fails, Exim knows that the result of the statement is
+"deny", so it goes no further. The first message modifier has been seen, so its
+text is used as the error message. If sender verification succeeds, but
+recipient verification fails, the second message is used. If recipient
+verification succeeds, the third message becomes "current", but is never used
+because there are no more conditions to cause failure.
+
+For the deny verb, on the other hand, it is always the last message modifier
+that is used, because all the conditions must be true for rejection to happen.
+Specifying more than one message modifier does not make sense, and the message
+can even be specified after all the conditions. For example:
+
+deny   hosts = ...
+      !senders = *@my.domain.example
+       message = Invalid sender from client host
+
+The "deny" result does not happen until the end of the statement is reached, by
+which time Exim has set up the message.
+
+
+44.21 ACL modifiers
+-------------------
+
+The ACL modifiers are as follows:
+
+add_header = <text>
+
+    This modifier specifies one or more header lines that are to be added to an
+    incoming message, assuming, of course, that the message is ultimately
+    accepted. For details, see section 44.24.
+
+continue = <text>
+
+    This modifier does nothing of itself, and processing of the ACL always
+    continues with the next condition or modifier. The value of continue is in
+    the side effects of expanding its argument. Typically this could be used to
+    update a database. It is really just a syntactic tidiness, to avoid having
+    to write rather ugly lines like this:
+
+    condition = ${if eq{0}{<some expansion>}{true}{true}}
+
+    Instead, all you need is
+
+    continue = <some expansion>
+
+control = <text>
+
+    This modifier affects the subsequent processing of the SMTP connection or
+    of an incoming message that is accepted. The effect of the first type of
+    control lasts for the duration of the connection, whereas the effect of the
+    second type lasts only until the current message has been received. The
+    message-specific controls always apply to the whole message, not to
+    individual recipients, even if the control modifier appears in a RCPT ACL.
+
+    As there are now quite a few controls that can be applied, they are
+    described separately in section 44.22. The control modifier can be used in
+    several different ways. For example:
+
+      o It can be at the end of an accept statement:
+
+            accept  ...some conditions
+                    control = queue
+
+        In this case, the control is applied when this statement yields
+        "accept", in other words, when the conditions are all true.
+
+      o It can be in the middle of an accept statement:
+
+            accept  ...some conditions...
+                    control = queue
+                    ...some more conditions...
+
+        If the first set of conditions are true, the control is applied, even
+        if the statement does not accept because one of the second set of
+        conditions is false. In this case, some subsequent statement must yield
+        "accept" for the control to be relevant.
+
+      o It can be used with warn to apply the control, leaving the decision
+        about accepting or denying to a subsequent verb. For example:
+
+            warn    ...some conditions...
+                    control = freeze
+            accept  ...
+
+        This example of warn does not contain message, log_message, or logwrite
+        , so it does not add anything to the message and does not write a log
+        entry.
+
+      o If you want to apply a control unconditionally, you can use it with a 
+        require verb. For example:
+
+            require  control = no_multiline_responses
+
+delay = <time>
+
+    This modifier may appear in any ACL except notquit. It causes Exim to wait
+    for the time interval before proceeding. However, when testing Exim using
+    the -bh option, the delay is not actually imposed (an appropriate message
+    is output instead). The time is given in the usual Exim notation, and the
+    delay happens as soon as the modifier is processed. In an SMTP session,
+    pending output is flushed before the delay is imposed.
+
+    Like control, delay can be used with accept or deny, for example:
+
+    deny    ...some conditions...
+            delay = 30s
+
+    The delay happens if all the conditions are true, before the statement
+    returns "deny". Compare this with:
+
+    deny    delay = 30s
+            ...some conditions...
+
+    which waits for 30s before processing the conditions. The delay modifier
+    can also be used with warn and together with control:
+
+    warn    ...some conditions...
+            delay = 2m
+            control = freeze
+    accept  ...
+
+    If delay is encountered when the SMTP PIPELINING extension is in use,
+    responses to several commands are no longer buffered and sent in one packet
+    (as they would normally be) because all output is flushed before imposing
+    the delay. This optimization is disabled so that a number of small delays
+    do not appear to the client as one large aggregated delay that might
+    provoke an unwanted timeout. You can, however, disable output flushing for 
+    delay by using a control modifier to set no_delay_flush.
+
+endpass
+
+    This modifier, which has no argument, is recognized only in accept and 
+    discard statements. It marks the boundary between the conditions whose
+    failure causes control to pass to the next statement, and the conditions
+    whose failure causes the ACL to return "deny". This concept has proved to
+    be confusing to some people, so the use of endpass is no longer recommended
+    as "best practice". See the description of accept above for more details.
+
+log_message = <text>
+
+    This modifier sets up a message that is used as part of the log message if
+    the ACL denies access or a warn statement's conditions are true. For
+    example:
+
+    require log_message = wrong cipher suite $tls_in_cipher
+            encrypted   = DES-CBC3-SHA
+
+    log_message is also used when recipients are discarded by discard. For
+    example:
+
+    discard <some conditions>
+            log_message = Discarded $local_part@$domain because...
+
+    When access is denied, log_message adds to any underlying error message
+    that may exist because of a condition failure. For example, while verifying
+    a recipient address, a :fail: redirection might have already set up a
+    message.
+
+    The message may be defined before the conditions to which it applies,
+    because the string expansion does not happen until Exim decides that access
+    is to be denied. This means that any variables that are set by the
+    condition are available for inclusion in the message. For example, the
+    $dnslist_<xxx> variables are set after a DNS black list lookup succeeds. If
+    the expansion of log_message fails, or if the result is an empty string,
+    the modifier is ignored.
+
+    If you want to use a warn statement to log the result of an address
+    verification, you can use $acl_verify_message to include the verification
+    error message.
+
+    If log_message is used with a warn statement, "Warning:" is added to the
+    start of the logged message. If the same warning log message is requested
+    more than once while receiving a single email message, only one copy is
+    actually logged. If you want to log multiple copies, use logwrite instead
+    of log_message. In the absence of log_message and logwrite, nothing is
+    logged for a successful warn statement.
+
+    If log_message is not present and there is no underlying error message (for
+    example, from the failure of address verification), but message is present,
+    the message text is used for logging rejections. However, if any text for
+    logging contains newlines, only the first line is logged. In the absence of
+    both log_message and message, a default built-in message is used for
+    logging rejections.
+
+log_reject_target = <log name list>
+
+    This modifier makes it possible to specify which logs are used for messages
+    about ACL rejections. Its argument is a colon-separated list of words that
+    can be "main", "reject", or "panic". The default is "main:reject". The list
+    may be empty, in which case a rejection is not logged at all. For example,
+    this ACL fragment writes no logging information when access is denied:
+
+    deny <some conditions>
+         log_reject_target =
+
+    This modifier can be used in SMTP and non-SMTP ACLs. It applies to both
+    permanent and temporary rejections. Its effect lasts for the rest of the
+    current ACL.
+
+logwrite = <text>
+
+    This modifier writes a message to a log file as soon as it is encountered
+    when processing an ACL. (Compare log_message, which, except in the case of 
+    warn and discard, is used only if the ACL statement denies access.) The 
+    logwrite modifier can be used to log special incidents in ACLs. For
+    example:
+
+    accept <some special conditions>
+           control  = freeze
+           logwrite = froze message because ...
+
+    By default, the message is written to the main log. However, it may begin
+    with a colon, followed by a comma-separated list of log names, and then
+    another colon, to specify exactly which logs are to be written. For
+    example:
+
+    logwrite = :main,reject: text for main and reject logs
+    logwrite = :panic: text for panic log only
+
+message = <text>
+
+    This modifier sets up a text string that is expanded and used as a response
+    message when an ACL statement terminates the ACL with an "accept", "deny",
+    or "defer" response. (In the case of the accept and discard verbs, there is
+    some complication if endpass is involved; see the description of accept for
+    details.)
+
+    The expansion of the message happens at the time Exim decides that the ACL
+    is to end, not at the time it processes message. If the expansion fails, or
+    generates an empty string, the modifier is ignored. Here is an example
+    where message must be specified first, because the ACL ends with a
+    rejection if the hosts condition fails:
+
+    require  message = Host not recognized
+             hosts = 10.0.0.0/8
+
+    (Once a condition has failed, no further conditions or modifiers are
+    processed.)
+
+    For ACLs that are triggered by SMTP commands, the message is returned as
+    part of the SMTP response. The use of message with accept (or discard) is
+    meaningful only for SMTP, as no message is returned when a non-SMTP message
+    is accepted. In the case of the connect ACL, accepting with a message
+    modifier overrides the value of smtp_banner. For the EHLO/HELO ACL, a
+    customized accept message may not contain more than one line (otherwise it
+    will be truncated at the first newline and a panic logged), and it cannot
+    affect the EHLO options.
+
+    When SMTP is involved, the message may begin with an overriding response
+    code, consisting of three digits optionally followed by an "extended
+    response code" of the form n.n.n, each code being followed by a space. For
+    example:
+
+    deny  message = 599 1.2.3 Host not welcome
+          hosts = 192.168.34.0/24
+
+    The first digit of the supplied response code must be the same as would be
+    sent by default. A panic occurs if it is not. Exim uses a 550 code when it
+    denies access, but for the predata ACL, note that the default success code
+    is 354, not 2xx.
+
+    Notwithstanding the previous paragraph, for the QUIT ACL, unlike the
+    others, the message modifier cannot override the 221 response code.
+
+    The text in a message modifier is literal; any quotes are taken as
+    literals, but because the string is expanded, backslash escapes are
+    processed anyway. If the message contains newlines, this gives rise to a
+    multi-line SMTP response.
+
+    While the text is being expanded, the $acl_verify_message variable contains
+    any message previously set. Afterwards, $acl_verify_message is cleared.
+
+    If message is used on a statement that verifies an address, the message
+    specified overrides any message that is generated by the verification
+    process. However, the original message is available in the variable
+    $acl_verify_message, so you can incorporate it into your message if you
+    wish. In particular, if you want the text from :fail: items in redirect
+    routers to be passed back as part of the SMTP response, you should either
+    not use a message modifier, or make use of $acl_verify_message.
+
+    For compatibility with previous releases of Exim, a message modifier that
+    is used with a warn verb behaves in a similar way to the add_header
+    modifier, but this usage is now deprecated. However, message acts only when
+    all the conditions are true, wherever it appears in an ACL command, whereas
+    add_header acts as soon as it is encountered. If message is used with warn
+    in an ACL that is not concerned with receiving a message, it has no effect.
+
+queue = <text>
+
+    This modifier specifies the use of a named queue for spool files for the
+    message. It can only be used before the message is received (i.e. not in
+    the DATA ACL). This could be used, for example, for known high-volume burst
+    sources of traffic, or for quarantine of messages. Separate queue-runner
+    processes will be needed for named queues. If the text after expansion is
+    empty, the default queue is used.
+
+remove_header = <text>
+
+    This modifier specifies one or more header names in a colon-separated list
+    that are to be removed from an incoming message, assuming, of course, that
+    the message is ultimately accepted. For details, see section 44.25.
+
+set <acl_name> = <value>
+
+    This modifier puts a value into one of the ACL variables (see section 44.19
+    ).
+
+udpsend = <parameters>
+
+    This modifier sends a UDP packet, for purposes such as statistics
+    collection or behaviour monitoring. The parameters are expanded, and the
+    result of the expansion must be a colon-separated list consisting of a
+    destination server, port number, and the packet contents. The server can be
+    specified as a host name or IPv4 or IPv6 address. The separator can be
+    changed with the usual angle bracket syntax. For example, you might want to
+    collect information on which hosts connect when:
+
+    udpsend = <; 2001:dB8::dead:beef ; 1234 ;\
+                 $tod_zulu $sender_host_address
+
+
+44.22 Use of the control modifier
+---------------------------------
+
+The control modifier supports the following settings:
+
+control = allow_auth_unadvertised
+
+    This modifier allows a client host to use the SMTP AUTH command even when
+    it has not been advertised in response to EHLO. Furthermore, because there
+    are apparently some really broken clients that do this, Exim will accept
+    AUTH after HELO (rather than EHLO) when this control is set. It should be
+    used only if you really need it, and you should limit its use to those
+    broken clients that do not work without it. For example:
+
+    warn hosts   = 192.168.34.25
+         control = allow_auth_unadvertised
+
+    Normally, when an Exim server receives an AUTH command, it checks the name
+    of the authentication mechanism that is given in the command to ensure that
+    it matches an advertised mechanism. When this control is set, the check
+    that a mechanism has been advertised is bypassed. Any configured mechanism
+    can be used by the client. This control is permitted only in the connection
+    and HELO ACLs.
+
+control = caseful_local_part, control = caselower_local_part
+
+    These two controls are permitted only in the ACL specified by acl_smtp_rcpt
+    (that is, during RCPT processing). By default, the contents of $local_part
+    are lower cased before ACL processing. If "caseful_local_part" is
+    specified, any uppercase letters in the original local part are restored in
+    $local_part for the rest of the ACL, or until a control that sets
+    "caselower_local_part" is encountered.
+
+    These controls affect only the current recipient. Moreover, they apply only
+    to local part handling that takes place directly in the ACL (for example,
+    as a key in lookups). If a test to verify the recipient is obeyed, the
+    case-related handling of the local part during the verification is
+    controlled by the router configuration (see the caseful_local_part generic
+    router option).
+
+    This facility could be used, for example, to add a spam score to local
+    parts containing upper case letters. For example, using $acl_m4 to
+    accumulate the spam score:
+
+    warn  control = caseful_local_part
+          set acl_m4 = ${eval:\
+                         $acl_m4 + \
+                         ${if match{$local_part}{[A-Z]}{1}{0}}\
+                        }
+          control = caselower_local_part
+
+    Notice that we put back the lower cased version afterwards, assuming that
+    is what is wanted for subsequent tests.
+
+control = cutthrough_delivery/<options>
+
+    This option requests delivery be attempted while the item is being
+    received.
+
+    The option is usable in the RCPT ACL. If enabled for a message received via
+    smtp and routed to an smtp transport, and only one transport, interface,
+    destination host and port combination is used for all recipients of the
+    message, then the delivery connection is made while the receiving
+    connection is open and data is copied from one to the other.
+
+    An attempt to set this option for any recipient but the first for a mail
+    will be quietly ignored. If a recipient-verify callout (with use_sender)
+    connection is subsequently requested in the same ACL it is held open and
+    used for any subsequent recipients and the data, otherwise one is made
+    after the initial RCPT ACL completes.
+
+    Note that routers are used in verify mode, and cannot depend on content of
+    received headers. Note also that headers cannot be modified by any of the
+    post-data ACLs (DATA, MIME and DKIM). Headers may be modified by routers
+    (subject to the above) and transports. The Received-By: header is generated
+    as soon as the body reception starts, rather than the traditional time
+    after the full message is received; this will affect the timestamp.
+
+    All the usual ACLs are called; if one results in the message being
+    rejected, all effort spent in delivery (including the costs on the ultimate
+    destination) will be wasted. Note that in the case of data-time ACLs this
+    includes the entire message body.
+
+    Cutthrough delivery is not supported via transport-filters or when DKIM
+    signing of outgoing messages is done, because it sends data to the ultimate
+    destination before the entire message has been received from the source. It
+    is not supported for messages received with the SMTP PRDR or CHUNKING
+    options in use.
+
+    Should the ultimate destination system positively accept or reject the
+    mail, a corresponding indication is given to the source system and nothing
+    is queued. If the item is successfully delivered in cutthrough mode the
+    delivery log lines are tagged with ">>" rather than "=>" and appear before
+    the acceptance "<=" line.
+
+    If there is a temporary error the item is queued for later delivery in the
+    usual fashion. This behaviour can be adjusted by appending the option defer
+    =<value> to the control; the default value is "spool" and the alternate
+    value "pass" copies an SMTP defer response from the target back to the
+    initiator and does not queue the message. Note that this is independent of
+    any recipient verify conditions in the ACL.
+
+    Delivery in this mode avoids the generation of a bounce mail to a (possibly
+    faked) sender when the destination system is doing content-scan based
+    rejection.
+
+control = debug/<options>
+
+    This control turns on debug logging, almost as though Exim had been invoked
+    with "-d", with the output going to a new logfile in the usual logs
+    directory, by default called debuglog.
+
+    Logging set up by the control will be maintained across spool residency.
+
+    Options are a slash-separated list. If an option takes an argument, the
+    option name and argument are separated by an equals character. Several
+    options are supported:
+
+    tag=<suffix>         The filename can be adjusted with thise option.
+         The argument, which may access any variables already defined,
+                         is appended to the default name.
+
+    opts=<debug options> The argument specififes what is to be logged,
+                         using the same values as the -d command-line option.
+
+    stop                 Logging started with this control may be
+                         stopped by using this option.
+
+    kill                 Logging started with this control may be
+                         stopped by using this option.
+                         Additionally the debug file will be removed,
+                         providing one means for speculative debug tracing.
+
+    pretrigger=<size>    This option specifies a memory buffuer to be used
+                         for pre-trigger debug capture.
+                         Debug lines are recorded in the buffer until
+                         and if) a trigger occurs; at which time they are
+                         dumped to the debug file.  Newer lines displace the
+                         oldest if the buffer is full.  After a trigger,
+                         immediate writes to file are done as normal.
+
+    trigger=<reason>     This option selects cause for the pretrigger buffer
+                         see above) to be copied to file.  A reason of $*now*
+                         take effect immediately; one of paniclog triggers
+                         on a write to the panic log.
+
+    Some examples (which depend on variables that don't exist in all contexts):
+
+          control = debug
+          control = debug/tag=.$sender_host_address
+          control = debug/opts=+expand+acl
+          control = debug/tag=.$message_exim_id/opts=+expand
+          control = debug/kill
+          control = debug/opts=+all/pretrigger=1024/trigger=paniclog
+          control = debug/trigger=now
+
+control = dkim_disable_verify
+
+    This control turns off DKIM verification processing entirely. For details
+    on the operation and configuration of DKIM, see section 58.1.
+
+control = dmarc_disable_verify
+
+    This control turns off DMARC verification processing entirely. For details
+    on the operation and configuration of DMARC, see section 58.6.
+
+control = dscp/<value>
+
+    This option causes the DSCP value associated with the socket for the
+    inbound connection to be adjusted to a given value, given as one of a
+    number of fixed strings or to numeric value. The -bI:dscp option may be
+    used to ask Exim which names it knows of. Common values include
+    "throughput", "mincost", and on newer systems "ef", "af41", etc. Numeric
+    values may be in the range 0 to 0x3F.
+
+    The outbound packets from Exim will be marked with this value in the header
+    (for IPv4, the TOS field; for IPv6, the TCLASS field); there is no
+    guarantee that these values will have any effect, not be stripped by
+    networking equipment, or do much of anything without cooperation with your
+    Network Engineer and those of all network operators between the source and
+    destination.
+
+control = enforce_sync, control = no_enforce_sync
+
+    These controls make it possible to be selective about when SMTP
+    synchronization is enforced. The global option smtp_enforce_sync specifies
+    the initial state of the switch (it is true by default). See the
+    description of this option in chapter 14 for details of SMTP
+    synchronization checking.
+
+    The effect of these two controls lasts for the remainder of the SMTP
+    connection. They can appear in any ACL except the one for the non-SMTP
+    messages. The most straightforward place to put them is in the ACL defined
+    by acl_smtp_connect, which is run at the start of an incoming SMTP
+    connection, before the first synchronization check. The expected use is to
+    turn off the synchronization checks for badly-behaved hosts that you
+    nevertheless need to work with.
+
+control = fakedefer/<message>
+
+    This control works in exactly the same way as fakereject (described below)
+    except that it causes an SMTP 450 response after the message data instead
+    of a 550 response. You must take care when using fakedefer because it
+    causes the messages to be duplicated when the sender retries. Therefore,
+    you should not use fakedefer if the message is to be delivered normally.
+
+control = fakereject/<message>
+
+    This control is permitted only for the MAIL, RCPT, and DATA ACLs, in other
+    words, only when an SMTP message is being received. If Exim accepts the
+    message, instead the final 250 response, a 550 rejection message is sent.
+    However, Exim proceeds to deliver the message as normal. The control
+    applies only to the current message, not to any subsequent ones that may be
+    received in the same SMTP connection.
+
+    The text for the 550 response is taken from the control modifier. If no
+    message is supplied, the following is used:
+
+    550-Your message has been rejected but is being
+    550-kept for evaluation.
+    550-If it was a legitimate message, it may still be
+    550 delivered to the target recipient(s).
+
+    This facility should be used with extreme caution.
+
+control = freeze
+
+    This control is permitted only for the MAIL, RCPT, DATA, and non-SMTP ACLs,
+    in other words, only when a message is being received. If the message is
+    accepted, it is placed on Exim's queue and frozen. The control applies only
+    to the current message, not to any subsequent ones that may be received in
+    the same SMTP connection.
+
+    This modifier can optionally be followed by "/no_tell". If the global
+    option freeze_tell is set, it is ignored for the current message (that is,
+    nobody is told about the freezing), provided all the control=freeze
+    modifiers that are obeyed for the current message have the "/no_tell"
+    option.
+
+control = no_delay_flush
+
+    Exim normally flushes SMTP output before implementing a delay in an ACL, to
+    avoid unexpected timeouts in clients when the SMTP PIPELINING extension is
+    in use. This control, as long as it is encountered before the delay
+    modifier, disables such output flushing.
+
+control = no_callout_flush
+
+    Exim normally flushes SMTP output before performing a callout in an ACL, to
+    avoid unexpected timeouts in clients when the SMTP PIPELINING extension is
+    in use. This control, as long as it is encountered before the verify
+    condition that causes the callout, disables such output flushing.
+
+control = no_mbox_unspool
+
+    This control is available when Exim is compiled with the content scanning
+    extension. Content scanning may require a copy of the current message, or
+    parts of it, to be written in "mbox format" to a spool file, for passing to
+    a virus or spam scanner. Normally, such copies are deleted when they are no
+    longer needed. If this control is set, the copies are not deleted. The
+    control applies only to the current message, not to any subsequent ones
+    that may be received in the same SMTP connection. It is provided for
+    debugging purposes and is unlikely to be useful in production.
+
+control = no_multiline_responses
+
+    This control is permitted for any ACL except the one for non-SMTP messages.
+    It seems that there are broken clients in use that cannot handle multiline
+    SMTP responses, despite the fact that RFC 821 defined them over 20 years
+    ago.
+
+    If this control is set, multiline SMTP responses from ACL rejections are
+    suppressed. One way of doing this would have been to put out these
+    responses as one long line. However, RFC 2821 specifies a maximum of 512
+    bytes per response ("use multiline responses for more" it says - ha!), and
+    some of the responses might get close to that. So this facility, which is
+    after all only a sop to broken clients, is implemented by doing two very
+    easy things:
+
+      o Extra information that is normally output as part of a rejection caused
+        by sender verification failure is omitted. Only the final line
+        (typically "sender verification failed") is sent.
+
+      o If a message modifier supplies a multiline response, only the first
+        line is output.
+
+    The setting of the switch can, of course, be made conditional on the
+    calling host. Its effect lasts until the end of the SMTP connection.
+
+control = no_pipelining
+
+    This control turns off the advertising of the PIPELINING extension to SMTP
+    in the current session. To be useful, it must be obeyed before Exim sends
+    its response to an EHLO command. Therefore, it should normally appear in an
+    ACL controlled by acl_smtp_connect or acl_smtp_helo. See also 
+    pipelining_advertise_hosts.
+
+control = queue/<options>*, control = queue_only
+
+    This control is permitted only for the MAIL, RCPT, DATA, and non-SMTP ACLs,
+    in other words, only when a message is being received. If the message is
+    accepted, it is placed on Exim's queue and left there for delivery by a
+    subsequent queue runner. If used with no options set, no immediate delivery
+    process is started. In other words, it has the effect as the queue_only
+    global option or -odq command-line option.
+
+    If the first_pass_route option is given then the behaviour is like the
+    command-line -oqds option; a delivery process is started which stops short
+    of making any SMTP delivery. The benefit is that the hints database will be
+    updated for the message being waiting for a specific host, and a later
+    queue run will be able to send all such messages on a single connection.
+
+    The control only applies to the current message, not to any subsequent ones
+    that may be received in the same SMTP connection.
+
+control = submission/<options>
+
+    This control is permitted only for the MAIL, RCPT, and start of data ACLs
+    (the latter is the one defined by acl_smtp_predata). Setting it tells Exim
+    that the current message is a submission from a local MUA. In this case,
+    Exim operates in "submission mode", and applies certain fixups to the
+    message if necessary. For example, it adds a Date: header line if one is
+    not present. This control is not permitted in the acl_smtp_data ACL,
+    because that is too late (the message has already been created).
+
+    Chapter 48 describes the processing that Exim applies to messages. Section
+    48.1 covers the processing that happens in submission mode; the available
+    options for this control are described there. The control applies only to
+    the current message, not to any subsequent ones that may be received in the
+    same SMTP connection.
+
+control = suppress_local_fixups
+
+    This control applies to locally submitted (non TCP/IP) messages, and is the
+    complement of "control = submission". It disables the fixups that are
+    normally applied to locally-submitted messages. Specifically:
+
+      o Any Sender: header line is left alone (in this respect, it is a dynamic
+        version of local_sender_retain).
+
+      o No Message-ID:, From:, or Date: header lines are added.
+
+      o There is no check that From: corresponds to the actual sender.
+
+    This control may be useful when a remotely-originated message is accepted,
+    passed to some scanning program, and then re-submitted for delivery. It can
+    be used only in the acl_smtp_mail, acl_smtp_rcpt, acl_smtp_predata, and 
+    acl_not_smtp_start ACLs, because it has to be set before the message's data
+    is read.
+
+    Note: This control applies only to the current message, not to any others
+    that are being submitted at the same time using -bs or -bS.
+
+control = utf8_downconvert
+
+    This control enables conversion of UTF-8 in message envelope addresses to
+    a-label form. For details see section 60.1.
+
+
+44.23 Summary of message fixup control
+--------------------------------------
+
+All four possibilities for message fixups can be specified:
+
+  * Locally submitted, fixups applied: the default.
+
+  * Locally submitted, no fixups applied: use "control =
+    suppress_local_fixups".
+
+  * Remotely submitted, no fixups applied: the default.
+
+  * Remotely submitted, fixups applied: use "control = submission".
+
+
+44.24 Adding header lines in ACLs
+---------------------------------
+
+The add_header modifier can be used to add one or more extra header lines to an
+incoming message, as in this example:
+
+warn dnslists = sbl.spamhaus.org : \
+                dialup.mail-abuse.org
+     add_header = X-blacklisted-at: $dnslist_domain
+
+The add_header modifier is permitted in the MAIL, RCPT, PREDATA, DATA, MIME,
+DKIM, and non-SMTP ACLs (in other words, those that are concerned with
+receiving a message). The message must ultimately be accepted for add_header to
+have any significant effect. You can use add_header with any ACL verb,
+including deny (though this is potentially useful only in a RCPT ACL).
+
+Headers will not be added to the message if the modifier is used in DATA, MIME
+or DKIM ACLs for a message delivered by cutthrough routing.
+
+Leading and trailing newlines are removed from the data for the add_header
+modifier; if it then contains one or more newlines that are not followed by a
+space or a tab, it is assumed to contain multiple header lines. Each one is
+checked for valid syntax; "X-ACL-Warn:" is added to the front of any line that
+is not a valid header line.
+
+Added header lines are accumulated during the MAIL, RCPT, and predata ACLs.
+They are added to the message before processing the DATA and MIME ACLs.
+However, if an identical header line is requested more than once, only one copy
+is actually added to the message. Further header lines may be accumulated
+during the DATA and MIME ACLs, after which they are added to the message, again
+with duplicates suppressed. Thus, it is possible to add two identical header
+lines to an SMTP message, but only if one is added before DATA and one after.
+In the case of non-SMTP messages, new headers are accumulated during the
+non-SMTP ACLs, and are added to the message after all the ACLs have run. If a
+message is rejected after DATA or by the non-SMTP ACL, all added header lines
+are included in the entry that is written to the reject log.
+
+Header lines are not visible in string expansions of message headers until they
+are added to the message. It follows that header lines defined in the MAIL,
+RCPT, and predata ACLs are not visible until the DATA ACL and MIME ACLs are
+run. Similarly, header lines that are added by the DATA or MIME ACLs are not
+visible in those ACLs. Because of this restriction, you cannot use header lines
+as a way of passing data between (for example) the MAIL and RCPT ACLs. If you
+want to do this, you can use ACL variables, as described in section 44.19.
+
+The list of headers yet to be added is given by the $headers_added variable.
+
+The add_header modifier acts immediately as it is encountered during the
+processing of an ACL. Notice the difference between these two cases:
+
+accept add_header = ADDED: some text
+       <some condition>
+
+accept <some condition>
+       add_header = ADDED: some text
+
+In the first case, the header line is always added, whether or not the
+condition is true. In the second case, the header line is added only if the
+condition is true. Multiple occurrences of add_header may occur in the same ACL
+statement. All those that are encountered before a condition fails are
+honoured.
+
+For compatibility with previous versions of Exim, a message modifier for a warn
+verb acts in the same way as add_header, except that it takes effect only if
+all the conditions are true, even if it appears before some of them.
+Furthermore, only the last occurrence of message is honoured. This usage of 
+message is now deprecated. If both add_header and message are present on a warn
+verb, both are processed according to their specifications.
+
+By default, new header lines are added to a message at the end of the existing
+header lines. However, you can specify that any particular header line should
+be added right at the start (before all the Received: lines), immediately after
+the first block of Received: lines, or immediately before any line that is not
+a Received: or Resent-something: header.
+
+This is done by specifying ":at_start:", ":after_received:", or
+":at_start_rfc:" (or, for completeness, ":at_end:") before the text of the
+header line, respectively. (Header text cannot start with a colon, as there has
+to be a header name first.) For example:
+
+warn add_header = \
+       :after_received:X-My-Header: something or other...
+
+If more than one header line is supplied in a single add_header modifier, each
+one is treated independently and can therefore be placed differently. If you
+add more than one line at the start, or after the Received: block, they end up
+in reverse order.
+
+Warning: This facility currently applies only to header lines that are added in
+an ACL. It does NOT work for header lines that are added in a system filter or
+in a router or transport.
+
+
+44.25 Removing header lines in ACLs
+-----------------------------------
+
+The remove_header modifier can be used to remove one or more header lines from
+an incoming message, as in this example:
+
+warn   message        = Remove internal headers
+       remove_header  = x-route-mail1 : x-route-mail2
+
+The remove_header modifier is permitted in the MAIL, RCPT, PREDATA, DATA, MIME,
+DKIM, and non-SMTP ACLs (in other words, those that are concerned with
+receiving a message). The message must ultimately be accepted for remove_header
+to have any significant effect. You can use remove_header with any ACL verb,
+including deny, though this is really not useful for any verb that doesn't
+result in a delivered message.
+
+Headers will not be removed from the message if the modifier is used in DATA,
+MIME or DKIM ACLs for a message delivered by cutthrough routing.
+
+More than one header can be removed at the same time by using a colon separated
+list of header names. The header matching is case insensitive. Wildcards are
+not permitted, nor is list expansion performed, so you cannot use hostlists to
+create a list of headers, however both connection and message variable
+expansion are performed ($acl_c_* and $acl_m_*), illustrated in this example:
+
+warn   hosts           = +internal_hosts
+       set acl_c_ihdrs = x-route-mail1 : x-route-mail2
+warn   message         = Remove internal headers
+       remove_header   = $acl_c_ihdrs
+
+Header names for removal are accumulated during the MAIL, RCPT, and predata
+ACLs. Matching header lines are removed from the message before processing the
+DATA and MIME ACLs. If multiple header lines match, all are removed. There is
+no harm in attempting to remove the same header twice nor in removing a
+non-existent header. Further header lines to be removed may be accumulated
+during the DATA and MIME ACLs, after which they are removed from the message,
+if present. In the case of non-SMTP messages, headers to be removed are
+accumulated during the non-SMTP ACLs, and are removed from the message after
+all the ACLs have run. If a message is rejected after DATA or by the non-SMTP
+ACL, there really is no effect because there is no logging of what headers
+would have been removed.
+
+Header lines are not visible in string expansions until the DATA phase when it
+is received. Any header lines removed in the MAIL, RCPT, and predata ACLs are
+not visible in the DATA ACL and MIME ACLs. Similarly, header lines that are
+removed by the DATA or MIME ACLs are still visible in those ACLs. Because of
+this restriction, you cannot use header lines as a way of controlling data
+passed between (for example) the MAIL and RCPT ACLs. If you want to do this,
+you should instead use ACL variables, as described in section 44.19.
+
+The remove_header modifier acts immediately as it is encountered during the
+processing of an ACL. Notice the difference between these two cases:
+
+accept remove_header = X-Internal
+       <some condition>
+
+accept <some condition>
+       remove_header = X-Internal
+
+In the first case, the header line is always removed, whether or not the
+condition is true. In the second case, the header line is removed only if the
+condition is true. Multiple occurrences of remove_header may occur in the same
+ACL statement. All those that are encountered before a condition fails are
+honoured.
+
+Warning: This facility currently applies only to header lines that are present
+during ACL processing. It does NOT remove header lines that are added in a
+system filter or in a router or transport.
+
+
+44.26 ACL conditions
+--------------------
+
+Some of the conditions listed in this section are available only when Exim is
+compiled with the content-scanning extension. They are included here briefly
+for completeness. More detailed descriptions can be found in the discussion on
+content scanning in chapter 45.
+
+Not all conditions are relevant in all circumstances. For example, testing
+senders and recipients does not make sense in an ACL that is being run as the
+result of the arrival of an ETRN command, and checks on message headers can be
+done only in the ACLs specified by acl_smtp_data and acl_not_smtp. You can use
+the same condition (with different parameters) more than once in the same ACL
+statement. This provides a way of specifying an "and" conjunction. The
+conditions are as follows:
+
+acl = <name of acl or ACL string or file name >
+
+    The possible values of the argument are the same as for the acl_smtp_xxx
+    options. The named or inline ACL is run. If it returns "accept" the
+    condition is true; if it returns "deny" the condition is false. If it
+    returns "defer", the current ACL returns "defer" unless the condition is on
+    a warn verb. In that case, a "defer" return makes the condition false. This
+    means that further processing of the warn verb ceases, but processing of
+    the ACL continues.
+
+    If the argument is a named ACL, up to nine space-separated optional values
+    can be appended; they appear within the called ACL in $acl_arg1 to
+    $acl_arg9, and $acl_narg is set to the count of values. Previous values of
+    these variables are restored after the call returns. The name and values
+    are expanded separately. Note that spaces in complex expansions which are
+    used as arguments will act as argument separators.
+
+    If the nested acl returns "drop" and the outer condition denies access, the
+    connection is dropped. If it returns "discard", the verb must be accept or 
+    discard, and the action is taken immediately - no further conditions are
+    tested.
+
+    ACLs may be nested up to 20 deep; the limit exists purely to catch runaway
+    loops. This condition allows you to use different ACLs in different
+    circumstances. For example, different ACLs can be used to handle RCPT
+    commands for different local users or different local domains.
+
+authenticated = <string list>
+
+    If the SMTP connection is not authenticated, the condition is false.
+    Otherwise, the name of the authenticator is tested against the list. To
+    test for authentication by any authenticator, you can set
+
+    authenticated = *
+
+condition = <string>
+
+    This feature allows you to make up custom conditions. If the result of
+    expanding the string is an empty string, the number zero, or one of the
+    strings "no" or "false", the condition is false. If the result is any
+    non-zero number, or one of the strings "yes" or "true", the condition is
+    true. For any other value, some error is assumed to have occurred, and the
+    ACL returns "defer". However, if the expansion is forced to fail, the
+    condition is ignored. The effect is to treat it as true, whether it is
+    positive or negative.
+
+decode = <location>
+
+    This condition is available only when Exim is compiled with the
+    content-scanning extension, and it is allowed only in the ACL defined by 
+    acl_smtp_mime. It causes the current MIME part to be decoded into a file.
+    If all goes well, the condition is true. It is false only if there are
+    problems such as a syntax error or a memory shortage. For more details, see
+    chapter 45.
+
+dnslists = <list of domain names and other data>
+
+    This condition checks for entries in DNS black lists. These are also known
+    as "RBL lists", after the original Realtime Blackhole List, but note that
+    the use of the lists at mail-abuse.org now carries a charge. There are too
+    many different variants of this condition to describe briefly here. See
+    sections 44.27-44.37 for details.
+
+domains = <domain list>
+
+    This condition is relevant only after a RCPT command. It checks that the
+    domain of the recipient address is in the domain list. If percent-hack
+    processing is enabled, it is done before this test is done. If the check
+    succeeds with a lookup, the result of the lookup is placed in $domain_data
+    until the next domains test.
+
+    Note carefully (because many people seem to fall foul of this): you cannot
+    use domains in a DATA ACL.
+
+encrypted = <string list>
+
+    If the SMTP connection is not encrypted, the condition is false. Otherwise,
+    the name of the cipher suite in use is tested against the list. To test for
+    encryption without testing for any specific cipher suite(s), set
+
+    encrypted = *
+
+hosts = <host list>
+
+    This condition tests that the calling host matches the host list. If you
+    have name lookups or wildcarded host names and IP addresses in the same
+    host list, you should normally put the IP addresses first. For example, you
+    could have:
+
+    accept hosts = 10.9.8.7 : dbm;/etc/friendly/hosts
+
+    The lookup in this example uses the host name for its key. This is implied
+    by the lookup type "dbm". (For a host address lookup you would use
+    "net-dbm" and it wouldn't matter which way round you had these two items.)
+
+    The reason for the problem with host names lies in the left-to-right way
+    that Exim processes lists. It can test IP addresses without doing any DNS
+    lookups, but when it reaches an item that requires a host name, it fails if
+    it cannot find a host name to compare with the pattern. If the above list
+    is given in the opposite order, the accept statement fails for a host whose
+    name cannot be found, even if its IP address is 10.9.8.7.
+
+    If you really do want to do the name check first, and still recognize the
+    IP address even if the name lookup fails, you can rewrite the ACL like
+    this:
+
+    accept hosts = dbm;/etc/friendly/hosts
+    accept hosts = 10.9.8.7
+
+    The default action on failing to find the host name is to assume that the
+    host is not in the list, so the first accept statement fails. The second
+    statement can then check the IP address.
+
+    If a hosts condition is satisfied by means of a lookup, the result of the
+    lookup is made available in the $host_data variable. This allows you, for
+    example, to set up a statement like this:
+
+    deny  hosts = net-lsearch;/some/file
+          message = $host_data
+
+    which gives a custom error message for each denied host.
+
+local_parts = <local part list>
+
+    This condition is relevant only after a RCPT command. It checks that the
+    local part of the recipient address is in the list. If percent-hack
+    processing is enabled, it is done before this test. If the check succeeds
+    with a lookup, the result of the lookup is placed in $local_part_data,
+    which remains set until the next local_parts test.
+
+malware = <option>
+
+    This condition is available only when Exim is compiled with the
+    content-scanning extension and only after a DATA command. It causes the
+    incoming message to be scanned for viruses. For details, see chapter 45.
+
+mime_regex = <list of regular expressions>
+
+    This condition is available only when Exim is compiled with the
+    content-scanning extension, and it is allowed only in the ACL defined by 
+    acl_smtp_mime. It causes the current MIME part to be scanned for a match
+    with any of the regular expressions. For details, see chapter 45.
+
+ratelimit = <parameters>
+
+    This condition can be used to limit the rate at which a user or host
+    submits messages. Details are given in section 44.39.
+
+recipients = <address list>
+
+    This condition is relevant only after a RCPT command. It checks the entire
+    recipient address against a list of recipients.
+
+regex = <list of regular expressions>
+
+    This condition is available only when Exim is compiled with the
+    content-scanning extension, and is available only in the DATA, MIME, and
+    non-SMTP ACLs. It causes the incoming message to be scanned for a match
+    with any of the regular expressions. For details, see chapter 45.
+
+seen = <parameters>
+
+    This condition can be used to test if a situation has been previously met,
+    for example for greylisting. Details are given in section 44.38.
+
+sender_domains = <domain list>
+
+    This condition tests the domain of the sender of the message against the
+    given domain list. Note: The domain of the sender address is in
+    $sender_address_domain. It is not put in $domain during the testing of this
+    condition. This is an exception to the general rule for testing domain
+    lists. It is done this way so that, if this condition is used in an ACL for
+    a RCPT command, the recipient's domain (which is in $domain) can be used to
+    influence the sender checking.
+
+    Warning: It is a bad idea to use this condition on its own as a control on
+    relaying, because sender addresses are easily, and commonly, forged.
+
+senders = <address list>
+
+    This condition tests the sender of the message against the given list. To
+    test for a bounce message, which has an empty sender, set
+
+    senders = :
+
+    Warning: It is a bad idea to use this condition on its own as a control on
+    relaying, because sender addresses are easily, and commonly, forged.
+
+spam = <username>
+
+    This condition is available only when Exim is compiled with the
+    content-scanning extension. It causes the incoming message to be scanned by
+    SpamAssassin. For details, see chapter 45.
+
+verify = certificate
+
+    This condition is true in an SMTP session if the session is encrypted, and
+    a certificate was received from the client, and the certificate was
+    verified. The server requests a certificate only if the client matches 
+    tls_verify_hosts or tls_try_verify_hosts (see chapter 43).
+
+verify = csa
+
+    This condition checks whether the sending host (the client) is authorized
+    to send email. Details of how this works are given in section 44.52.
+
+verify = header_names_ascii
+
+    This condition is relevant only in an ACL that is run after a message has
+    been received. This usually means an ACL specified by acl_smtp_data or 
+    acl_not_smtp. It checks all header names (not the content) to make sure
+    there are no non-ASCII characters, also excluding control characters. The
+    allowable characters are decimal ASCII values 33 through 126.
+
+    Exim itself will handle headers with non-ASCII characters, but it can cause
+    problems for downstream applications, so this option will allow their
+    detection and rejection in the DATA ACL's.
+
+verify = header_sender/<options>
+
+    This condition is relevant only in an ACL that is run after a message has
+    been received, that is, in an ACL specified by acl_smtp_data or 
+    acl_not_smtp. It checks that there is a verifiable address in at least one
+    of the Sender:, Reply-To:, or From: header lines. Such an address is
+    loosely thought of as a "sender" address (hence the name of the test).
+    However, an address that appears in one of these headers need not be an
+    address that accepts bounce messages; only sender addresses in envelopes
+    are required to accept bounces. Therefore, if you use the callout option on
+    this check, you might want to arrange for a non-empty address in the MAIL
+    command.
+
+    Details of address verification and the options are given later, starting
+    at section 44.45 (callouts are described in section 44.46). You can combine
+    this condition with the senders condition to restrict it to bounce messages
+    only:
+
+    deny    senders = :
+           !verify  = header_sender
+            message = A valid sender header is required for bounces
+
+verify = header_syntax
+
+    This condition is relevant only in an ACL that is run after a message has
+    been received, that is, in an ACL specified by acl_smtp_data or 
+    acl_not_smtp. It checks the syntax of all header lines that can contain
+    lists of addresses (Sender:, From:, Reply-To:, To:, Cc:, and Bcc:),
+    returning true if there are no problems. Unqualified addresses (local parts
+    without domains) are permitted only in locally generated messages and from
+    hosts that match sender_unqualified_hosts or recipient_unqualified_hosts,
+    as appropriate.
+
+    Note that this condition is a syntax check only. However, a common spamming
+    ploy used to be to send syntactically invalid headers such as
+
+    To: @
+
+    and this condition can be used to reject such messages, though they are not
+    as common as they used to be.
+
+verify = helo
+
+    This condition is true if a HELO or EHLO command has been received from the
+    client host, and its contents have been verified. If there has been no
+    previous attempt to verify the HELO/EHLO contents, it is carried out when
+    this condition is encountered. See the description of the helo_verify_hosts
+    and helo_try_verify_hosts options for details of how to request
+    verification independently of this condition, and for detail of the
+    verification.
+
+    For SMTP input that does not come over TCP/IP (the -bs command line
+    option), this condition is always true.
+
+verify = not_blind/<options>
+
+    This condition checks that there are no blind (bcc) recipients in the
+    message. Every envelope recipient must appear either in a To: header line
+    or in a Cc: header line for this condition to be true. Local parts are
+    checked case-sensitively; domains are checked case-insensitively. If 
+    Resent-To: or Resent-Cc: header lines exist, they are also checked. This
+    condition can be used only in a DATA or non-SMTP ACL.
+
+    There is one possible option, "case_insensitive". If this is present then
+    local parts are checked case-insensitively.
+
+    There are, of course, many legitimate messages that make use of blind (bcc)
+    recipients. This check should not be used on its own for blocking messages.
+
+verify = recipient/<options>
+
+    This condition is relevant only after a RCPT command. It verifies the
+    current recipient. Details of address verification are given later,
+    starting at section 44.45. After a recipient has been verified, the value
+    of $address_data is the last value that was set while routing the address.
+    This applies even if the verification fails. When an address that is being
+    verified is redirected to a single address, verification continues with the
+    new address, and in that case, the subsequent value of $address_data is the
+    value for the child address.
+
+verify = reverse_host_lookup/<options>
+
+    This condition ensures that a verified host name has been looked up from
+    the IP address of the client host. (This may have happened already if the
+    host name was needed for checking a host list, or if the host matched 
+    host_lookup.) Verification ensures that the host name obtained from a
+    reverse DNS lookup, or one of its aliases, does, when it is itself looked
+    up in the DNS, yield the original IP address.
+
+    There is one possible option, "defer_ok". If this is present and a DNS
+    operation returns a temporary error, the verify condition succeeds.
+
+    If this condition is used for a locally generated message (that is, when
+    there is no client host involved), it always succeeds.
+
+verify = sender/<options>
+
+    This condition is relevant only after a MAIL or RCPT command, or after a
+    message has been received (the acl_smtp_data or acl_not_smtp ACLs). If the
+    message's sender is empty (that is, this is a bounce message), the
+    condition is true. Otherwise, the sender address is verified.
+
+    If there is data in the $address_data variable at the end of routing, its
+    value is placed in $sender_address_data at the end of verification. This
+    value can be used in subsequent conditions and modifiers in the same ACL
+    statement. It does not persist after the end of the current statement. If
+    you want to preserve the value for longer, you can save it in an ACL
+    variable.
+
+    Details of verification are given later, starting at section 44.45. Exim
+    caches the result of sender verification, to avoid doing it more than once
+    per message.
+
+verify = sender=<address>/<options>
+
+    This is a variation of the previous option, in which a modified address is
+    verified as a sender.
+
+    Note that '/' is legal in local-parts; if the address may have such (eg. is
+    generated from the received message) they must be protected from the
+    options parsing by doubling:
+
+    verify = sender=${listquote{/}{${address:$h_sender:}}}
+
+
+44.27 Using DNS lists
+---------------------
+
+In its simplest form, the dnslists condition tests whether the calling host is
+on at least one of a number of DNS lists by looking up the inverted IP address
+in one or more DNS domains. (Note that DNS list domains are not mail domains,
+so the "+" syntax for named lists doesn't work - it is used for special options
+instead.) For example, if the calling host's IP address is 192.168.62.43, and
+the ACL statement is
+
+deny dnslists = blackholes.mail-abuse.org : \
+                dialups.mail-abuse.org
+
+the following records are looked up:
+
+43.62.168.192.blackholes.mail-abuse.org
+43.62.168.192.dialups.mail-abuse.org
+
+As soon as Exim finds an existing DNS record, processing of the list stops.
+Thus, multiple entries on the list provide an "or" conjunction. If you want to
+test that a host is on more than one list (an "and" conjunction), you can use
+two separate conditions:
+
+deny dnslists = blackholes.mail-abuse.org
+     dnslists = dialups.mail-abuse.org
+
+If a DNS lookup times out or otherwise fails to give a decisive answer, Exim
+behaves as if the host does not match the list item, that is, as if the DNS
+record does not exist. If there are further items in the DNS list, they are
+processed.
+
+This is usually the required action when dnslists is used with deny (which is
+the most common usage), because it prevents a DNS failure from blocking mail.
+However, you can change this behaviour by putting one of the following special
+items in the list:
+
+    +include_unknown behave as if the item is on the list
+    +exclude_unknown behave as if the item is not on the list (default)
+    +defer_unknown   give a temporary error
+
+Each of these applies to any subsequent items on the list. For example:
+
+deny dnslists = +defer_unknown : foo.bar.example
+
+Testing the list of domains stops as soon as a match is found. If you want to
+warn for one list and block for another, you can use two different statements:
+
+deny  dnslists = blackholes.mail-abuse.org
+warn  dnslists = dialups.mail-abuse.org
+      message  = X-Warn: sending host is on dialups list
+
+DNS list lookups are cached by Exim for the duration of the SMTP session (but
+limited by the DNS return TTL value), so a lookup based on the IP address is
+done at most once for any incoming connection (assuming long-enough TTL). Exim
+does not share information between multiple incoming connections (but your
+local name server cache should be active).
+
+There are a number of DNS lists to choose from, some commercial, some free, or
+free for small deployments. An overview can be found at https://
+en.wikipedia.org/wiki/Comparison_of_DNS_blacklists.
+
+
+44.28 Specifying the IP address for a DNS list lookup
+-----------------------------------------------------
+
+By default, the IP address that is used in a DNS list lookup is the IP address
+of the calling host. However, you can specify another IP address by listing it
+after the domain name, introduced by a slash. For example:
+
+deny dnslists = black.list.tld/192.168.1.2
+
+This feature is not very helpful with explicit IP addresses; it is intended for
+use with IP addresses that are looked up, for example, the IP addresses of the
+MX hosts or nameservers of an email sender address. For an example, see section
+44.30 below.
+
+
+44.29 DNS lists keyed on domain names
+-------------------------------------
+
+There are some lists that are keyed on domain names rather than inverted IP
+addresses (see, e.g., the domain based zones link at http://
+www.rfc-ignorant.org/). No reversing of components is used with these lists.
+You can change the name that is looked up in a DNS list by listing it after the
+domain name, introduced by a slash. For example,
+
+deny  dnslists = dsn.rfc-ignorant.org/$sender_address_domain
+      message  = Sender's domain is listed at $dnslist_domain
+
+This particular example is useful only in ACLs that are obeyed after the RCPT
+or DATA commands, when a sender address is available. If (for example) the
+message's sender is user@tld.example the name that is looked up by this example
+is
+
+tld.example.dsn.rfc-ignorant.org
+
+A single dnslists condition can contain entries for both names and IP
+addresses. For example:
+
+deny dnslists = sbl.spamhaus.org : \
+                dsn.rfc-ignorant.org/$sender_address_domain
+
+The first item checks the sending host's IP address; the second checks a domain
+name. The whole condition is true if either of the DNS lookups succeeds.
+
+
+44.30 Multiple explicit keys for a DNS list
+-------------------------------------------
+
+The syntax described above for looking up explicitly-defined values (either
+names or IP addresses) in a DNS blacklist is a simplification. After the domain
+name for the DNS list, what follows the slash can in fact be a list of items.
+As with all lists in Exim, the default separator is a colon. However, because
+this is a sublist within the list of DNS blacklist domains, it is necessary
+either to double the separators like this:
+
+dnslists = black.list.tld/name.1::name.2
+
+or to change the separator character, like this:
+
+dnslists = black.list.tld/<;name.1;name.2
+
+If an item in the list is an IP address, it is inverted before the DNS
+blacklist domain is appended. If it is not an IP address, no inversion occurs.
+Consider this condition:
+
+dnslists = black.list.tld/<;192.168.1.2;a.domain
+
+The DNS lookups that occur are:
+
+2.1.168.192.black.list.tld
+a.domain.black.list.tld
+
+Once a DNS record has been found (that matches a specific IP return address, if
+specified - see section 44.33), no further lookups are done. If there is a
+temporary DNS error, the rest of the sublist of domains or IP addresses is
+tried. A temporary error for the whole dnslists item occurs only if no other
+DNS lookup in this sublist succeeds. In other words, a successful lookup for
+any of the items in the sublist overrides a temporary error for a previous
+item.
+
+The ability to supply a list of items after the slash is in some sense just a
+syntactic convenience. These two examples have the same effect:
+
+dnslists = black.list.tld/a.domain : black.list.tld/b.domain
+dnslists = black.list.tld/a.domain::b.domain
+
+However, when the data for the list is obtained from a lookup, the second form
+is usually much more convenient. Consider this example:
+
+deny dnslists = sbl.spamhaus.org/<|${lookup dnsdb {>|a=<|\
+                                   ${lookup dnsdb {>|mxh=\
+                                   $sender_address_domain} }} }
+     message  = The mail servers for the domain \
+                $sender_address_domain \
+                are listed at $dnslist_domain ($dnslist_value); \
+                see $dnslist_text.
+
+Note the use of ">|" in the dnsdb lookup to specify the separator for multiple
+DNS records. The inner dnsdb lookup produces a list of MX hosts and the outer
+dnsdb lookup finds the IP addresses for these hosts. The result of expanding
+the condition might be something like this:
+
+dnslists = sbl.spamhaus.org/<|192.168.2.3|192.168.5.6|...
+
+Thus, this example checks whether or not the IP addresses of the sender
+domain's mail servers are on the Spamhaus black list.
+
+The key that was used for a successful DNS list lookup is put into the variable
+$dnslist_matched (see section 44.32).
+
+
+44.31 Data returned by DNS lists
+--------------------------------
+
+DNS lists are constructed using address records in the DNS. The original RBL
+just used the address 127.0.0.1 on the right hand side of each record, but the
+RBL+ list and some other lists use a number of values with different meanings.
+The values used on the RBL+ list are:
+
+    127.1.0.1 RBL
+    127.1.0.2 DUL
+    127.1.0.3 DUL and RBL
+    127.1.0.4 RSS
+    127.1.0.5 RSS and RBL
+    127.1.0.6 RSS and DUL
+    127.1.0.7 RSS and DUL and RBL
+
+Section 44.33 below describes how you can distinguish between different values.
+Some DNS lists may return more than one address record; see section 44.35 for
+details of how they are checked.
+
+Values returned by a properly running DBSBL should be in the 127.0.0.0/8 range.
+If a DNSBL operator loses control of the domain, lookups on it may start
+returning other addresses. Because of this, Exim now ignores returned values
+outside the 127/8 region.
+
+
+44.32 Variables set from DNS lists
+----------------------------------
+
+When an entry is found in a DNS list, the variable $dnslist_domain contains the
+name of the overall domain that matched (for example, "spamhaus.example"),
+$dnslist_matched contains the key within that domain (for example,
+"192.168.5.3"), and $dnslist_value contains the data from the DNS record. When
+the key is an IP address, it is not reversed in $dnslist_matched (though it is,
+of course, in the actual lookup). In simple cases, for example:
+
+deny dnslists = spamhaus.example
+
+the key is also available in another variable (in this case,
+$sender_host_address). In more complicated cases, however, this is not true.
+For example, using a data lookup (as described in section 44.30) might generate
+a dnslists lookup like this:
+
+deny dnslists = spamhaus.example/<|192.168.1.2|192.168.6.7|...
+
+If this condition succeeds, the value in $dnslist_matched might be
+"192.168.6.7" (for example).
+
+If more than one address record is returned by the DNS lookup, all the IP
+addresses are included in $dnslist_value, separated by commas and spaces. The
+variable $dnslist_text contains the contents of any associated TXT record. For
+lists such as RBL+ the TXT record for a merged entry is often not very
+meaningful. See section 44.36 for a way of obtaining more information.
+
+You can use the DNS list variables in message or log_message modifiers - even
+if these appear before the condition in the ACL, they are not expanded until
+after it has failed. For example:
+
+deny    hosts = !+local_networks
+        message = $sender_host_address is listed \
+                  at $dnslist_domain
+        dnslists = rbl-plus.mail-abuse.example
+
+
+44.33 Additional matching conditions for DNS lists
+--------------------------------------------------
+
+You can add an equals sign and an IP address after a dnslists domain name in
+order to restrict its action to DNS records with a matching right hand side.
+For example,
+
+deny dnslists = rblplus.mail-abuse.org=127.0.0.2
+
+rejects only those hosts that yield 127.0.0.2. Without this additional data,
+any address record is considered to be a match. For the moment, we assume that
+the DNS lookup returns just one record. Section 44.35 describes how multiple
+records are handled.
+
+More than one IP address may be given for checking, using a comma as a
+separator. These are alternatives - if any one of them matches, the dnslists
+condition is true. For example:
+
+deny  dnslists = a.b.c=127.0.0.2,127.0.0.3
+
+If you want to specify a constraining address list and also specify names or IP
+addresses to be looked up, the constraining address list must be specified
+first. For example:
+
+deny dnslists = dsn.rfc-ignorant.org\
+                =127.0.0.2/$sender_address_domain
+
+If the character "&" is used instead of "=", the comparison for each listed IP
+address is done by a bitwise "and" instead of by an equality test. In other
+words, the listed addresses are used as bit masks. The comparison is true if
+all the bits in the mask are present in the address that is being tested. For
+example:
+
+dnslists = a.b.c&0.0.0.3
+
+matches if the address is x.x.x.3, x.x.x.7, x.x.x.11, etc. If you want to test
+whether one bit or another bit is present (as opposed to both being present),
+you must use multiple values. For example:
+
+dnslists = a.b.c&0.0.0.1,0.0.0.2
+
+matches if the final component of the address is an odd number or two times an
+odd number.
+
+
+44.34 Negated DNS matching conditions
+-------------------------------------
+
+You can supply a negative list of IP addresses as part of a dnslists condition.
+Whereas
+
+deny  dnslists = a.b.c=127.0.0.2,127.0.0.3
+
+means "deny if the host is in the black list at the domain a.b.c and the IP
+address yielded by the list is either 127.0.0.2 or 127.0.0.3",
+
+deny  dnslists = a.b.c!=127.0.0.2,127.0.0.3
+
+means "deny if the host is in the black list at the domain a.b.c and the IP
+address yielded by the list is not 127.0.0.2 and not 127.0.0.3". In other
+words, the result of the test is inverted if an exclamation mark appears before
+the "=" (or the "&") sign.
+
+Note: This kind of negation is not the same as negation in a domain, host, or
+address list (which is why the syntax is different).
+
+If you are using just one list, the negation syntax does not gain you much. The
+previous example is precisely equivalent to
+
+deny  dnslists = a.b.c
+     !dnslists = a.b.c=127.0.0.2,127.0.0.3
+
+However, if you are using multiple lists, the negation syntax is clearer.
+Consider this example:
+
+deny  dnslists = sbl.spamhaus.org : \
+                 list.dsbl.org : \
+                 dnsbl.njabl.org!=127.0.0.3 : \
+                 relays.ordb.org
+
+Using only positive lists, this would have to be:
+
+deny  dnslists = sbl.spamhaus.org : \
+                 list.dsbl.org
+deny  dnslists = dnsbl.njabl.org
+     !dnslists = dnsbl.njabl.org=127.0.0.3
+deny  dnslists = relays.ordb.org
+
+which is less clear, and harder to maintain.
+
+Negation can also be used with a bitwise-and restriction. The dnslists
+condition with only be trus if a result is returned by the lookup which, anded
+with the restriction, is all zeroes. For example:
+
+deny dnslists = zen.spamhaus.org!&0.255.255.0
+
+
+44.35 Handling multiple DNS records from a DNS list
+---------------------------------------------------
+
+A DNS lookup for a dnslists condition may return more than one DNS record,
+thereby providing more than one IP address. When an item in a dnslists list is
+followed by "=" or "&" and a list of IP addresses, in order to restrict the
+match to specific results from the DNS lookup, there are two ways in which the
+checking can be handled. For example, consider the condition:
+
+dnslists = a.b.c=127.0.0.1
+
+What happens if the DNS lookup for the incoming IP address yields both
+127.0.0.1 and 127.0.0.2 by means of two separate DNS records? Is the condition
+true because at least one given value was found, or is it false because at
+least one of the found values was not listed? And how does this affect negated
+conditions? Both possibilities are provided for with the help of additional
+separators "==" and "=&".
+
+  * If "=" or "&" is used, the condition is true if any one of the looked up IP
+    addresses matches one of the listed addresses. For the example above, the
+    condition is true because 127.0.0.1 matches.
+
+  * If "==" or "=&" is used, the condition is true only if every one of the
+    looked up IP addresses matches one of the listed addresses. If the
+    condition is changed to:
+
+    dnslists = a.b.c==127.0.0.1
+
+    and the DNS lookup yields both 127.0.0.1 and 127.0.0.2, the condition is
+    false because 127.0.0.2 is not listed. You would need to have:
+
+    dnslists = a.b.c==127.0.0.1,127.0.0.2
+
+    for the condition to be true.
+
+When "!" is used to negate IP address matching, it inverts the result, giving
+the precise opposite of the behaviour above. Thus:
+
+  * If "!=" or "!&" is used, the condition is true if none of the looked up IP
+    addresses matches one of the listed addresses. Consider:
+
+    dnslists = a.b.c!&0.0.0.1
+
+    If the DNS lookup yields both 127.0.0.1 and 127.0.0.2, the condition is
+    false because 127.0.0.1 matches.
+
+  * If "!==" or "!=&" is used, the condition is true if there is at least one
+    looked up IP address that does not match. Consider:
+
+    dnslists = a.b.c!=&0.0.0.1
+
+    If the DNS lookup yields both 127.0.0.1 and 127.0.0.2, the condition is
+    true, because 127.0.0.2 does not match. You would need to have:
+
+    dnslists = a.b.c!=&0.0.0.1,0.0.0.2
+
+    for the condition to be false.
+
+When the DNS lookup yields only a single IP address, there is no difference
+between "=" and "==" and between "&" and "=&".
+
+
+44.36 Detailed information from merged DNS lists
+------------------------------------------------
+
+When the facility for restricting the matching IP values in a DNS list is used,
+the text from the TXT record that is set in $dnslist_text may not reflect the
+true reason for rejection. This happens when lists are merged and the IP
+address in the A record is used to distinguish them; unfortunately there is
+only one TXT record. One way round this is not to use merged lists, but that
+can be inefficient because it requires multiple DNS lookups where one would do
+in the vast majority of cases when the host of interest is not on any of the
+lists.
+
+A less inefficient way of solving this problem is available. If two domain
+names, comma-separated, are given, the second is used first to do an initial
+check, making use of any IP value restrictions that are set. If there is a
+match, the first domain is used, without any IP value restrictions, to get the
+TXT record. As a byproduct of this, there is also a check that the IP being
+tested is indeed on the first list. The first domain is the one that is put in
+$dnslist_domain. For example:
+
+deny   dnslists = \
+         sbl.spamhaus.org,sbl-xbl.spamhaus.org=127.0.0.2 : \
+         dul.dnsbl.sorbs.net,dnsbl.sorbs.net=127.0.0.10
+       message  = \
+         rejected because $sender_host_address is blacklisted \
+         at $dnslist_domain\n$dnslist_text
+
+For the first blacklist item, this starts by doing a lookup in 
+sbl-xbl.spamhaus.org and testing for a 127.0.0.2 return. If there is a match,
+it then looks in sbl.spamhaus.org, without checking the return value, and as
+long as something is found, it looks for the corresponding TXT record. If there
+is no match in sbl-xbl.spamhaus.org, nothing more is done. The second blacklist
+item is processed similarly.
+
+If you are interested in more than one merged list, the same list must be given
+several times, but because the results of the DNS lookups are cached, the DNS
+calls themselves are not repeated. For example:
+
+deny dnslists = \
+         http.dnsbl.sorbs.net,dnsbl.sorbs.net=127.0.0.2 : \
+         socks.dnsbl.sorbs.net,dnsbl.sorbs.net=127.0.0.3 : \
+         misc.dnsbl.sorbs.net,dnsbl.sorbs.net=127.0.0.4 : \
+         dul.dnsbl.sorbs.net,dnsbl.sorbs.net=127.0.0.10
+
+In this case there is one lookup in dnsbl.sorbs.net, and if none of the IP
+values matches (or if no record is found), this is the only lookup that is
+done. Only if there is a match is one of the more specific lists consulted.
+
+
+44.37 DNS lists and IPv6
+------------------------
+
+If Exim is asked to do a dnslist lookup for an IPv6 address, it inverts it
+nibble by nibble. For example, if the calling host's IP address is
+3ffe:ffff:836f:0a00:000a:0800:200a:c031, Exim might look up
+
+1.3.0.c.a.0.0.2.0.0.8.0.a.0.0.0.0.0.a.0.f.6.3.8.
+  f.f.f.f.e.f.f.3.blackholes.mail-abuse.org
+
+(split over two lines here to fit on the page). Unfortunately, some of the DNS
+lists contain wildcard records, intended for IPv4, that interact badly with
+IPv6. For example, the DNS entry
+
+*.3.some.list.example.    A    127.0.0.1
+
+is probably intended to put the entire 3.0.0.0/8 IPv4 network on the list.
+Unfortunately, it also matches the entire 3::/4 IPv6 network.
+
+You can exclude IPv6 addresses from DNS lookups by making use of a suitable 
+condition condition, as in this example:
+
+deny   condition = ${if isip4{$sender_host_address}}
+       dnslists  = some.list.example
+
+If an explicit key is being used for a DNS lookup and it may be an IPv6 address
+you should specify alternate list separators for both the outer (DNS list name)
+list and inner (lookup keys) list:
+
+       dnslists = <; dnsbl.example.com/<|$acl_m_addrslist
+
+
+44.38 Previously seen user and hosts
+------------------------------------
+
+The seen ACL condition can be used to test whether a situation has been
+previously met. It uses a hints database to record a timestamp against a key.
+host. The syntax of the condition is:
+
+seen = <optional flag><time interval> / <options>
+
+For example,
+
+defer   seen = -5m / key=${sender_host_address}_$local_part@$domain
+
+in a RCPT ACL will implement simple greylisting.
+
+The parameters for the condition are a possible minus sign, then an interval,
+then, slash-separated, a list of options. The interval is taken as an offset
+before the current time, and used for the test. If the interval is preceded by
+a minus sign then the condition returns whether a record is found which is
+before the test time. Otherwise, the condition returns whether one is found
+which is since the test time.
+
+Options are read in order with later ones overriding earlier ones.
+
+The default key is $sender_host_address. An explicit key can be set using a key
+=value option.
+
+If a readonly option is given then no record create or update is done. If a 
+write option is given then a record create or update is always done. An update
+is done if the test is for "since". If none of those hold and there was no
+existing record, a record is created.
+
+Creates and updates are marked with the current time.
+
+Finally, a "before" test which succeeds, and for which the record is old
+enough, will be refreshed with a timestamp of the test time. This can prevent
+tidying of the database from removing the entry. The interval for this is, by
+default, 10 days. An explicit interval can be set using a refresh=value option.
+
+Note that "seen" should be added to the list of hints databases for maintenance
+if this ACL condition is used.
+
+
+44.39 Rate limiting incoming messages
+-------------------------------------
+
+The ratelimit ACL condition can be used to measure and control the rate at
+which clients can send email. This is more powerful than the smtp_ratelimit_*
+options, because those options control the rate of commands in a single SMTP
+session only, whereas the ratelimit condition works across all connections
+(concurrent and sequential) from the same client host. The syntax of the 
+ratelimit condition is:
+
+ratelimit = <m> / <p> / <options> / <key>
+
+If the average client sending rate is less than m messages per time period p
+then the condition is false; otherwise it is true.
+
+As a side-effect, the ratelimit condition sets the expansion variable
+$sender_rate to the client's computed rate, $sender_rate_limit to the
+configured value of m, and $sender_rate_period to the configured value of p.
+
+The parameter p is the smoothing time constant, in the form of an Exim time
+interval, for example, "8h" for eight hours. A larger time constant means that
+it takes Exim longer to forget a client's past behaviour. The parameter m is
+the maximum number of messages that a client is permitted to send in each time
+interval. It also specifies the number of messages permitted in a fast burst.
+By increasing both m and p but keeping m/p constant, you can allow a client to
+send more messages in a burst without changing its long-term sending rate
+limit. Conversely, if m and p are both small, messages must be sent at an even
+rate.
+
+There is a script in util/ratelimit.pl which extracts sending rates from log
+files, to assist with choosing appropriate settings for m and p when deploying
+the ratelimit ACL condition. The script prints usage instructions when it is
+run with no arguments.
+
+The key is used to look up the data for calculating the client's average
+sending rate. This data is stored in Exim's spool directory, alongside the
+retry and other hints databases. The default key is $sender_host_address, which
+means Exim computes the sending rate of each client host IP address. By
+changing the key you can change how Exim identifies clients for the purpose of
+ratelimiting. For example, to limit the sending rate of each authenticated
+user, independent of the computer they are sending from, set the key to
+$authenticated_id. You must ensure that the lookup key is meaningful; for
+example, $authenticated_id is only meaningful if the client has authenticated
+(which you can check with the authenticated ACL condition).
+
+The lookup key does not have to identify clients: If you want to limit the rate
+at which a recipient receives messages, you can use the key
+"$local_part@$domain" with the per_rcpt option (see below) in a RCPT ACL.
+
+Each ratelimit condition can have up to four options. A per_* option specifies
+what Exim measures the rate of, for example, messages or recipients or bytes.
+You can adjust the measurement using the unique= and/or count= options. You can
+also control when Exim updates the recorded rate using a strict, leaky, or 
+readonly option. The options are separated by a slash, like the other
+parameters. They may appear in any order.
+
+Internally, Exim appends the smoothing constant p onto the lookup key with any
+options that alter the meaning of the stored data. The limit m is not stored,
+so you can alter the configured maximum rate and Exim will still remember
+clients' past behaviour. If you change the per_* mode or add or remove the 
+unique= option, the lookup key changes so Exim will forget past behaviour. The
+lookup key is not affected by changes to the update mode and the count= option.
+
+
+44.40 Ratelimit options for what is being measured
+--------------------------------------------------
+
+The per_conn option limits the client's connection rate. It is not normally
+used in the acl_not_smtp, acl_not_smtp_mime, or acl_not_smtp_start ACLs.
+
+The per_mail option limits the client's rate of sending messages. This is the
+default if none of the per_* options is specified. It can be used in 
+acl_smtp_mail, acl_smtp_rcpt, acl_smtp_predata, acl_smtp_mime, acl_smtp_data,
+or acl_not_smtp.
+
+The per_byte option limits the sender's email bandwidth. It can be used in the
+same ACLs as the per_mail option, though it is best to use this option in the 
+acl_smtp_mime, acl_smtp_data or acl_not_smtp ACLs; if it is used in an earlier
+ACL, Exim relies on the SIZE parameter given by the client in its MAIL command,
+which may be inaccurate or completely missing. You can follow the limit m in
+the configuration with K, M, or G to specify limits in kilobytes, megabytes, or
+gigabytes, respectively.
+
+The per_rcpt option causes Exim to limit the rate at which recipients are
+accepted. It can be used in the acl_smtp_rcpt, acl_smtp_predata, acl_smtp_mime,
+or acl_smtp_data ACLs. In acl_smtp_rcpt the rate is updated one recipient at a
+time; in the other ACLs the rate is updated with the total (accepted) recipient
+count in one go. Note that in either case the rate limiting engine will see a
+message with many recipients as a large high-speed burst.
+
+The per_addr option is like the per_rcpt option, except it counts the number of
+different recipients that the client has sent messages to in the last time
+period. That is, if the client repeatedly sends messages to the same recipient,
+its measured rate is not increased. This option can only be used in 
+acl_smtp_rcpt.
+
+The per_cmd option causes Exim to recompute the rate every time the condition
+is processed. This can be used to limit the rate of any SMTP command. If it is
+used in multiple ACLs it can limit the aggregate rate of multiple different
+commands.
+
+The count= option can be used to alter how much Exim adds to the client's
+measured rate. For example, the per_byte option is equivalent to "per_mail/
+count=$message_size". If there is no count= option, Exim increases the measured
+rate by one (except for the per_rcpt option in ACLs other than acl_smtp_rcpt).
+The count does not have to be an integer.
+
+The unique= option is described in section 44.43 below.
+
+
+44.41 Ratelimit update modes
+----------------------------
+
+You can specify one of three options with the ratelimit condition to control
+when its database is updated. This section describes the readonly mode, and the
+next section describes the strict and leaky modes.
+
+If the ratelimit condition is used in readonly mode, Exim looks up a
+previously-computed rate to check against the limit.
+
+For example, you can test the client's sending rate and deny it access (when it
+is too fast) in the connect ACL. If the client passes this check then it can go
+on to send a message, in which case its recorded rate will be updated in the
+MAIL ACL. Subsequent connections from the same client will check this new rate.
+
+acl_check_connect:
+ deny ratelimit = 100 / 5m / readonly
+      log_message = RATE CHECK: $sender_rate/$sender_rate_period \
+                  (max $sender_rate_limit)
+# ...
+acl_check_mail:
+ warn ratelimit = 100 / 5m / strict
+      log_message = RATE UPDATE: $sender_rate/$sender_rate_period \
+                  (max $sender_rate_limit)
+
+If Exim encounters multiple ratelimit conditions with the same key when
+processing a message then it may increase the client's measured rate more than
+it should. For example, this will happen if you check the per_rcpt option in
+both acl_smtp_rcpt and acl_smtp_data. However it's OK to check the same 
+ratelimit condition multiple times in the same ACL. You can avoid any multiple
+update problems by using the readonly option on later ratelimit checks.
+
+The per_* options described above do not make sense in some ACLs. If you use a 
+per_* option in an ACL where it is not normally permitted then the update mode
+defaults to readonly and you cannot specify the strict or leaky modes. In other
+ACLs the default update mode is leaky (see the next section) so you must
+specify the readonly option explicitly.
+
+
+44.42 Ratelimit options for handling fast clients
+-------------------------------------------------
+
+If a client's average rate is greater than the maximum, the rate limiting
+engine can react in two possible ways, depending on the presence of the strict
+or leaky update modes. This is independent of the other counter-measures (such
+as rejecting the message) that may be specified by the rest of the ACL.
+
+The leaky (default) option means that the client's recorded rate is not updated
+if it is above the limit. The effect of this is that Exim measures the client's
+average rate of successfully sent email, up to the given limit. This is
+appropriate if the countermeasure when the condition is true consists of
+refusing the message, and is generally the better choice if you have clients
+that retry automatically. If the action when true is anything more complex then
+this option is likely not what is wanted.
+
+The strict option means that the client's recorded rate is always updated. The
+effect of this is that Exim measures the client's average rate of attempts to
+send email, which can be much higher than the maximum it is actually allowed.
+If the client is over the limit it may be subjected to counter-measures by the
+ACL. It must slow down and allow sufficient time to pass that its computed rate
+falls below the maximum before it can send email again. The time (the number of
+smoothing periods) it must wait and not attempt to send mail can be calculated
+with this formula:
+
+        ln(peakrate/maxrate)
+
+
+44.43 Limiting the rate of different events
+-------------------------------------------
+
+The ratelimit unique= option controls a mechanism for counting the rate of
+different events. For example, the per_addr option uses this mechanism to count
+the number of different recipients that the client has sent messages to in the
+last time period; it is equivalent to "per_rcpt/unique=$local_part@$domain".
+You could use this feature to measure the rate that a client uses different
+sender addresses with the options "per_mail/unique=$sender_address".
+
+For each ratelimit key Exim stores the set of unique= values that it has seen
+for that key. The whole set is thrown away when it is older than the rate
+smoothing period p, so each different event is counted at most once per period.
+In the leaky update mode, an event that causes the client to go over the limit
+is not added to the set, in the same way that the client's recorded rate is not
+updated in the same situation.
+
+When you combine the unique= and readonly options, the specific unique= value
+is ignored, and Exim just retrieves the client's stored rate.
+
+The unique= mechanism needs more space in the ratelimit database than the other
+ratelimit options in order to store the event set. The number of unique values
+is potentially as large as the rate limit, so the extra space required
+increases with larger limits.
+
+The uniqueification is not perfect: there is a small probability that Exim will
+think a new event has happened before. If the sender's rate is less than the
+limit, Exim should be more than 99.9% correct. However in strict mode the
+measured rate can go above the limit, in which case Exim may under-count events
+by a significant margin. Fortunately, if the rate is high enough (2.7 times the
+limit) that the false positive rate goes above 9%, then Exim will throw away
+the over-full event set before the measured rate falls below the limit.
+Therefore the only harm should be that exceptionally high sending rates are
+logged incorrectly; any countermeasures you configure will be as effective as
+intended.
+
+
+44.44 Using rate limiting
+-------------------------
+
+Exim's other ACL facilities are used to define what counter-measures are taken
+when the rate limit is exceeded. This might be anything from logging a warning
+(for example, while measuring existing sending rates in order to define
+policy), through time delays to slow down fast senders, up to rejecting the
+message. For example:
+
+# Log all senders' rates
+warn ratelimit = 0 / 1h / strict
+     log_message = Sender rate $sender_rate / $sender_rate_period
+
+# Slow down fast senders; note the need to truncate $sender_rate
+# at the decimal point.
+warn ratelimit = 100 / 1h / per_rcpt / strict
+     delay     = ${eval: ${sg{$sender_rate}{[.].*}{}} - \
+                   $sender_rate_limit }s
+
+# Keep authenticated users under control
+deny authenticated = *
+     ratelimit = 100 / 1d / strict / $authenticated_id
+
+# System-wide rate limit
+defer ratelimit = 10 / 1s / $primary_hostname
+      message = Sorry, too busy. Try again later.
+
+# Restrict incoming rate from each host, with a default
+# set using a macro and special cases looked up in a table.
+defer ratelimit = ${lookup {$sender_host_address} \
+                   cdb {DB/ratelimits.cdb} \
+                   {$value} {RATELIMIT} }
+      message = Sender rate exceeds $sender_rate_limit \
+               messages per $sender_rate_period
+
+Warning: If you have a busy server with a lot of ratelimit tests, especially
+with the per_rcpt option, you may suffer from a performance bottleneck caused
+by locking on the ratelimit hints database. Apart from making your ACLs less
+complicated, you can reduce the problem by using a RAM disk for Exim's hints
+directory (usually /var/spool/exim/db/). However this means that Exim will lose
+its hints data after a reboot (including retry hints, the callout cache, and
+ratelimit data).
+
+
+44.45 Address verification
+--------------------------
+
+Several of the verify conditions described in section 44.26 cause addresses to
+be verified. Section 44.50 discusses the reporting of sender verification
+failures. The verification conditions can be followed by options that modify
+the verification process. The options are separated from the keyword and from
+each other by slashes, and some of them contain parameters. For example:
+
+verify = sender/callout
+verify = recipient/defer_ok/callout=10s,defer_ok
+
+The first stage of address verification, which always happens, is to run the
+address through the routers, in "verify mode". Routers can detect the
+difference between verification and routing for delivery, and their actions can
+be varied by a number of generic options such as verify and verify_only (see
+chapter 15). If routing fails, verification fails. The available options are as
+follows:
+
+  * If the callout option is specified, successful routing to one or more
+    remote hosts is followed by a "callout" to those hosts as an additional
+    check. Callouts and their sub-options are discussed in the next section.
+
+  * If there is a defer error while doing verification routing, the ACL
+    normally returns "defer". However, if you include defer_ok in the options,
+    the condition is forced to be true instead. Note that this is a main
+    verification option as well as a suboption for callouts.
+
+  * The no_details option is covered in section 44.50, which discusses the
+    reporting of sender address verification failures.
+
+  * The success_on_redirect option causes verification always to succeed
+    immediately after a successful redirection. By default, if a redirection
+    generates just one address, that address is also verified. See further
+    discussion in section 44.51.
+
+  * If the quota option is specified for recipient verify, successful routing
+    to an appendfile transport is followed by a call into the transport to
+    evaluate the quota status for the recipient. No actual delivery is done,
+    but verification will succeed if the quota is sufficient for the message
+    (if the sender gave a message size) or not already exceeded (otherwise).
+
+After an address verification failure, $acl_verify_message contains the error
+message that is associated with the failure. It can be preserved by coding like
+this:
+
+warn  !verify = sender
+       set acl_m0 = $acl_verify_message
+
+If you are writing your own custom rejection message or log message when
+denying access, you can use this variable to include information about the
+verification failure. This variable is cleared at the end of processing the ACL
+verb.
+
+In addition, $sender_verify_failure or $recipient_verify_failure (as
+appropriate) contains one of the following words:
+
+  * qualify: The address was unqualified (no domain), and the message was
+    neither local nor came from an exempted host.
+
+  * route: Routing failed.
+
+  * mail: Routing succeeded, and a callout was attempted; rejection occurred at
+    or before the MAIL command (that is, on initial connection, HELO, or MAIL).
+
+  * recipient: The RCPT command in a callout was rejected.
+
+  * postmaster: The postmaster check in a callout was rejected.
+
+  * quota: The quota check for a local recipient did non pass.
+
+The main use of these variables is expected to be to distinguish between
+rejections of MAIL and rejections of RCPT in callouts.
+
+The above variables may also be set after a successful address verification to:
+
+  * random: A random local-part callout succeeded
+
+
+44.46 Callout verification
+--------------------------
+
+For non-local addresses, routing verifies the domain, but is unable to do any
+checking of the local part. There are situations where some means of verifying
+the local part is desirable. One way this can be done is to make an SMTP 
+callback to a delivery host for the sender address or a callforward to a
+subsequent host for a recipient address, to see if the host accepts the
+address. We use the term callout to cover both cases. Note that for a sender
+address, the callback is not to the client host that is trying to deliver the
+message, but to one of the hosts that accepts incoming mail for the sender's
+domain.
+
+Exim does not do callouts by default. If you want them to happen, you must
+request them by setting appropriate options on the verify condition, as
+described below. This facility should be used with care, because it can add a
+lot of resource usage to the cost of verifying an address. However, Exim does
+cache the results of callouts, which helps to reduce the cost. Details of
+caching are in section 44.48.
+
+Recipient callouts are usually used only between hosts that are controlled by
+the same administration. For example, a corporate gateway host could use
+callouts to check for valid recipients on an internal mailserver. A successful
+callout does not guarantee that a real delivery to the address would succeed;
+on the other hand, a failing callout does guarantee that a delivery would fail.
+
+If the callout option is present on a condition that verifies an address, a
+second stage of verification occurs if the address is successfully routed to
+one or more remote hosts. The usual case is routing by a dnslookup or a 
+manualroute router, where the router specifies the hosts. However, if a router
+that does not set up hosts routes to an smtp transport with a hosts setting,
+the transport's hosts are used. If an smtp transport has hosts_override set,
+its hosts are always used, whether or not the router supplies a host list.
+Callouts are only supported on smtp transports.
+
+The port that is used is taken from the transport, if it is specified and is a
+remote transport. (For routers that do verification only, no transport need be
+specified.) Otherwise, the default SMTP port is used. If a remote transport
+specifies an outgoing interface, this is used; otherwise the interface is not
+specified. Likewise, the text that is used for the HELO command is taken from
+the transport's helo_data option; if there is no transport, the value of
+$smtp_active_hostname is used.
+
+For a sender callout check, Exim makes SMTP connections to the remote hosts, to
+test whether a bounce message could be delivered to the sender address. The
+following SMTP commands are sent:
+
+HELO <local host name>
+MAIL FROM:<>
+RCPT TO:<the address to be tested>
+QUIT
+
+LHLO is used instead of HELO if the transport's protocol option is set to
+"lmtp".
+
+The callout may use EHLO, AUTH and/or STARTTLS given appropriate option
+settings.
+
+A recipient callout check is similar. By default, it also uses an empty address
+for the sender. This default is chosen because most hosts do not make use of
+the sender address when verifying a recipient. Using the same address means
+that a single cache entry can be used for each recipient. Some sites, however,
+do make use of the sender address when verifying. These are catered for by the 
+use_sender and use_postmaster options, described in the next section.
+
+If the response to the RCPT command is a 2xx code, the verification succeeds.
+If it is 5xx, the verification fails. For any other condition, Exim tries the
+next host, if any. If there is a problem with all the remote hosts, the ACL
+yields "defer", unless the defer_ok parameter of the callout option is given,
+in which case the condition is forced to succeed.
+
+A callout may take a little time. For this reason, Exim normally flushes SMTP
+output before performing a callout in an ACL, to avoid unexpected timeouts in
+clients when the SMTP PIPELINING extension is in use. The flushing can be
+disabled by using a control modifier to set no_callout_flush.
+
+A recipient callout which gets a 2xx code will assign untainted values to the
+$domain_data and $local_part_data variables, corresponding to the domain and
+local parts of the recipient address.
+
+
+44.47 Additional parameters for callouts
+----------------------------------------
+
+The callout option can be followed by an equals sign and a number of optional
+parameters, separated by commas. For example:
+
+verify = recipient/callout=10s,defer_ok
+
+The old syntax, which had callout_defer_ok and check_postmaster as separate
+verify options, is retained for backwards compatibility, but is now deprecated.
+The additional parameters for callout are as follows:
+
+<a time interval>
+
+    This specifies the timeout that applies for the callout attempt to each
+    host. For example:
+
+    verify = sender/callout=5s
+
+    The default is 30 seconds. The timeout is used for each response from the
+    remote host. It is also used for the initial connection, unless overridden
+    by the connect parameter.
+
+connect = <time interval>
+
+    This parameter makes it possible to set a different (usually smaller)
+    timeout for making the SMTP connection. For example:
+
+    verify = sender/callout=5s,connect=1s
+
+    If not specified, this timeout defaults to the general timeout value.
+
+defer_ok
+
+    When this parameter is present, failure to contact any host, or any other
+    kind of temporary error, is treated as success by the ACL. However, the
+    cache is not updated in this circumstance.
+
+fullpostmaster
+
+    This operates like the postmaster option (see below), but if the check for 
+    postmaster@domain fails, it tries just postmaster, without a domain, in
+    accordance with the specification in RFC 2821. The RFC states that the
+    unqualified address postmaster should be accepted.
+
+mailfrom = <email address>
+
+    When verifying addresses in header lines using the header_sender
+    verification option, Exim behaves by default as if the addresses are
+    envelope sender addresses from a message. Callout verification therefore
+    tests to see whether a bounce message could be delivered, by using an empty
+    address in the MAIL command. However, it is arguable that these addresses
+    might never be used as envelope senders, and could therefore justifiably
+    reject bounce messages (empty senders). The mailfrom callout parameter
+    allows you to specify what address to use in the MAIL command. For example:
+
+    require  verify = header_sender/callout=mailfrom=abcd@x.y.z
+
+    This parameter is available only for the header_sender verification option.
+
+maxwait = <time interval>
+
+    This parameter sets an overall timeout for performing a callout
+    verification. For example:
+
+    verify = sender/callout=5s,maxwait=30s
+
+    This timeout defaults to four times the callout timeout for individual SMTP
+    commands. The overall timeout applies when there is more than one host that
+    can be tried. The timeout is checked before trying the next host. This
+    prevents very long delays if there are a large number of hosts and all are
+    timing out (for example, when network connections are timing out).
+
+no_cache
+
+    When this parameter is given, the callout cache is neither read nor
+    updated.
+
+postmaster
+
+    When this parameter is set, a successful callout check is followed by a
+    similar check for the local part postmaster at the same domain. If this
+    address is rejected, the callout fails (but see fullpostmaster above). The
+    result of the postmaster check is recorded in a cache record; if it is a
+    failure, this is used to fail subsequent callouts for the domain without a
+    connection being made, until the cache record expires.
+
+postmaster_mailfrom = <email address>
+
+    The postmaster check uses an empty sender in the MAIL command by default.
+    You can use this parameter to do a postmaster check using a different
+    address. For example:
+
+    require  verify = sender/callout=postmaster_mailfrom=abc@x.y.z
+
+    If both postmaster and postmaster_mailfrom are present, the rightmost one
+    overrides. The postmaster parameter is equivalent to this example:
+
+    require  verify = sender/callout=postmaster_mailfrom=
+
+    Warning: The caching arrangements for postmaster checking do not take
+    account of the sender address. It is assumed that either the empty address
+    or a fixed non-empty address will be used. All that Exim remembers is that
+    the postmaster check for the domain succeeded or failed.
+
+random
+
+    When this parameter is set, before doing the normal callout check, Exim
+    does a check for a "random" local part at the same domain. The local part
+    is not really random - it is defined by the expansion of the option 
+    callout_random_local_part, which defaults to
+
+    $primary_hostname-$tod_epoch-testing
+
+    The idea here is to try to determine whether the remote host accepts all
+    local parts without checking. If it does, there is no point in doing
+    callouts for specific local parts. If the "random" check succeeds, the
+    result is saved in a cache record, and used to force the current and
+    subsequent callout checks to succeed without a connection being made, until
+    the cache record expires.
+
+use_postmaster
+
+    This parameter applies to recipient callouts only. For example:
+
+    deny  !verify = recipient/callout=use_postmaster
+
+    It causes a non-empty postmaster address to be used in the MAIL command
+    when performing the callout for the recipient, and also for a "random"
+    check if that is configured. The local part of the address is "postmaster"
+    and the domain is the contents of $qualify_domain.
+
+use_sender
+
+    This option applies to recipient callouts only. For example:
+
+    require  verify = recipient/callout=use_sender
+
+    It causes the message's actual sender address to be used in the MAIL
+    command when performing the callout, instead of an empty address. There is
+    no need to use this option unless you know that the called hosts make use
+    of the sender when checking recipients. If used indiscriminately, it
+    reduces the usefulness of callout caching.
+
+hold
+
+    This option applies to recipient callouts only. For example:
+
+    require  verify = recipient/callout=use_sender,hold
+
+    It causes the connection to be held open and used for any further
+    recipients and for eventual delivery (should that be done quickly). Doing
+    this saves on TCP and SMTP startup costs, and TLS costs also when that is
+    used for the connections. The advantage is only gained if there are no
+    callout cache hits (which could be enforced by the no_cache option), if the
+    use_sender option is used, if neither the random nor the use_postmaster
+    option is used, and if no other callouts intervene.
+
+If you use any of the parameters that set a non-empty sender for the MAIL
+command (mailfrom, postmaster_mailfrom, use_postmaster, or use_sender), you
+should think about possible loops. Recipient checking is usually done between
+two hosts that are under the same management, and the host that receives the
+callouts is not normally configured to do callouts itself. Therefore, it is
+normally safe to use use_postmaster or use_sender in these circumstances.
+
+However, if you use a non-empty sender address for a callout to an arbitrary
+host, there is the likelihood that the remote host will itself initiate a
+callout check back to your host. As it is checking what appears to be a message
+sender, it is likely to use an empty address in MAIL, thus avoiding a callout
+loop. However, to be on the safe side it would be best to set up your own ACLs
+so that they do not do sender verification checks when the recipient is the
+address you use for header sender or postmaster callout checking.
+
+Another issue to think about when using non-empty senders for callouts is
+caching. When you set mailfrom or use_sender, the cache record is keyed by the
+sender/recipient combination; thus, for any given recipient, many more actual
+callouts are performed than when an empty sender or postmaster is used.
+
+
+44.48 Callout caching
+---------------------
+
+Exim caches the results of callouts in order to reduce the amount of resources
+used, unless you specify the no_cache parameter with the callout option. A
+hints database called "callout" is used for the cache. Two different record
+types are used: one records the result of a callout check for a specific
+address, and the other records information that applies to the entire domain
+(for example, that it accepts the local part postmaster).
+
+When an original callout fails, a detailed SMTP error message is given about
+the failure. However, for subsequent failures use the cache data, this message
+is not available.
+
+The expiry times for negative and positive address cache records are
+independent, and can be set by the global options callout_negative_expire
+(default 2h) and callout_positive_expire (default 24h), respectively.
+
+If a host gives a negative response to an SMTP connection, or rejects any
+commands up to and including
+
+MAIL FROM:<>
+
+(but not including the MAIL command with a non-empty address), any callout
+attempt is bound to fail. Exim remembers such failures in a domain cache
+record, which it uses to fail callouts for the domain without making new
+connections, until the domain record times out. There are two separate expiry
+times for domain cache records: callout_domain_negative_expire (default 3h) and
+callout_domain_positive_expire (default 7d).
+
+Domain records expire when the negative expiry time is reached if callouts
+cannot be made for the domain, or if the postmaster check failed. Otherwise,
+they expire when the positive expiry time is reached. This ensures that, for
+example, a host that stops accepting "random" local parts will eventually be
+noticed.
+
+The callout caching mechanism is based on the domain of the address that is
+being tested. If the domain routes to several hosts, it is assumed that their
+behaviour will be the same.
+
+
+44.49 Quota caching
+-------------------
+
+Exim caches the results of quota verification in order to reduce the amount of
+resources used. The "callout" hints database is used.
+
+The default cache periods are five minutes for a positive (good) result and one
+hour for a negative result. To change the periods the quota option can be
+followed by an equals sign and a number of optional paramemters, separated by
+commas. For example:
+
+verify = recipient/quota=cachepos=1h,cacheneg=1d
+
+Possible parameters are:
+
+cachepos = <time interval>
+
+    Set the lifetime for a positive cache entry. A value of zero seconds is
+    legitimate.
+
+cacheneg = <time interval>
+
+    As above, for a negative entry.
+
+no_cache
+
+    Set both positive and negative lifetimes to zero.
+
+
+44.50 Sender address verification reporting
+-------------------------------------------
+
+See section 44.45 for a general discussion of verification. When sender
+verification fails in an ACL, the details of the failure are given as
+additional output lines before the 550 response to the relevant SMTP command
+(RCPT or DATA). For example, if sender callout is in use, you might see:
+
+MAIL FROM:<xyz@abc.example>
+250 OK
+RCPT TO:<pqr@def.example>
+550-Verification failed for <xyz@abc.example>
+550-Called:   192.168.34.43
+550-Sent:     RCPT TO:<xyz@abc.example>
+550-Response: 550 Unknown local part xyz in <xyz@abc.example>
+550 Sender verification failed
+
+If more than one RCPT command fails in the same way, the details are given only
+for the first of them. However, some administrators do not want to send out
+this much information. You can suppress the details by adding "/no_details" to
+the ACL statement that requests sender verification. For example:
+
+verify = sender/no_details
+
+
+44.51 Redirection while verifying
+---------------------------------
+
+A dilemma arises when a local address is redirected by aliasing or forwarding
+during verification: should the generated addresses themselves be verified, or
+should the successful expansion of the original address be enough to verify it?
+By default, Exim takes the following pragmatic approach:
+
+  * When an incoming address is redirected to just one child address,
+    verification continues with the child address, and if that fails to verify,
+    the original verification also fails.
+
+  * When an incoming address is redirected to more than one child address,
+    verification does not continue. A success result is returned.
+
+This seems the most reasonable behaviour for the common use of aliasing as a
+way of redirecting different local parts to the same mailbox. It means, for
+example, that a pair of alias entries of the form
+
+A.Wol:   aw123
+aw123:   :fail: Gone away, no forwarding address
+
+work as expected, with both local parts causing verification failure. When a
+redirection generates more than one address, the behaviour is more like a
+mailing list, where the existence of the alias itself is sufficient for
+verification to succeed.
+
+It is possible, however, to change the default behaviour so that all successful
+redirections count as successful verifications, however many new addresses are
+generated. This is specified by the success_on_redirect verification option.
+For example:
+
+require verify = recipient/success_on_redirect/callout=10s
+
+In this example, verification succeeds if a router generates a new address, and
+the callout does not occur, because no address was routed to a remote host.
+
+When verification is being tested via the -bv option, the treatment of
+redirections is as just described, unless the -v or any debugging option is
+also specified. In that case, full verification is done for every generated
+address and a report is output for each of them.
+
+
+44.52 Client SMTP authorization (CSA)
+-------------------------------------
+
+Client SMTP Authorization is a system that allows a site to advertise which
+machines are and are not permitted to send email. This is done by placing
+special SRV records in the DNS; these are looked up using the client's HELO
+domain. At the time of writing, CSA is still an Internet Draft. Client SMTP
+Authorization checks in Exim are performed by the ACL condition:
+
+verify = csa
+
+This fails if the client is not authorized. If there is a DNS problem, or if no
+valid CSA SRV record is found, or if the client is authorized, the condition
+succeeds. These three cases can be distinguished using the expansion variable
+$csa_status, which can take one of the values "fail", "defer", "unknown", or
+"ok". The condition does not itself defer because that would be likely to cause
+problems for legitimate email.
+
+The error messages produced by the CSA code include slightly more detail. If
+$csa_status is "defer", this may be because of problems looking up the CSA SRV
+record, or problems looking up the CSA target address record. There are four
+reasons for $csa_status being "fail":
+
+  * The client's host name is explicitly not authorized.
+
+  * The client's IP address does not match any of the CSA target IP addresses.
+
+  * The client's host name is authorized but it has no valid target IP
+    addresses (for example, the target's addresses are IPv6 and the client is
+    using IPv4).
+
+  * The client's host name has no CSA SRV record but a parent domain has
+    asserted that all subdomains must be explicitly authorized.
+
+The csa verification condition can take an argument which is the domain to use
+for the DNS query. The default is:
+
+verify = csa/$sender_helo_name
+
+This implementation includes an extension to CSA. If the query domain is an
+address literal such as [192.0.2.95], or if it is a bare IP address, Exim
+searches for CSA SRV records in the reverse DNS as if the HELO domain was (for
+example) 95.2.0.192.in-addr.arpa. Therefore it is meaningful to say:
+
+verify = csa/$sender_host_address
+
+In fact, this is the check that Exim performs if the client does not say HELO.
+This extension can be turned off by setting the main configuration option 
+dns_csa_use_reverse to be false.
+
+If a CSA SRV record is not found for the domain itself, a search is performed
+through its parent domains for a record which might be making assertions about
+subdomains. The maximum depth of this search is limited using the main
+configuration option dns_csa_search_limit, which is 5 by default. Exim does not
+look for CSA SRV records in a top level domain, so the default settings handle
+HELO domains as long as seven (hostname.five.four.three.two.one.com). This
+encompasses the vast majority of legitimate HELO domains.
+
+The dnsdb lookup also has support for CSA. Although dnsdb also supports direct
+SRV lookups, this is not sufficient because of the extra parent domain search
+behaviour of CSA, and (as with PTR lookups) dnsdb also turns IP addresses into
+lookups in the reverse DNS space. The result of a successful lookup such as:
+
+${lookup dnsdb {csa=$sender_helo_name}}
+
+has two space-separated fields: an authorization code and a target host name.
+The authorization code can be "Y" for yes, "N" for no, "X" for explicit
+authorization required but absent, or "?" for unknown.
+
+
+44.53 Bounce address tag validation
+-----------------------------------
+
+Bounce address tag validation (BATV) is a scheme whereby the envelope senders
+of outgoing messages have a cryptographic, timestamped "tag" added to them.
+Genuine incoming bounce messages should therefore always be addressed to
+recipients that have a valid tag. This scheme is a way of detecting unwanted
+bounce messages caused by sender address forgeries (often called "collateral
+spam"), because the recipients of such messages do not include valid tags.
+
+There are two expansion items to help with the implementation of the BATV
+"prvs" (private signature) scheme in an Exim configuration. This scheme signs
+the original envelope sender address by using a simple key to add a hash of the
+address and some time-based randomizing information. The prvs expansion item
+creates a signed address, and the prvscheck expansion item checks one. The
+syntax of these expansion items is described in section 11.5. The validity
+period on signed addresses is seven days.
+
+As an example, suppose the secret per-address keys are stored in an MySQL
+database. A query to look up the key for an address could be defined as a macro
+like this:
+
+PRVSCHECK_SQL = ${lookup mysql{SELECT secret FROM batv_prvs \
+                WHERE sender='${quote_mysql:$prvscheck_address}'\
+                }{$value}}
+
+Suppose also that the senders who make use of BATV are defined by an address
+list called batv_senders. Then, in the ACL for RCPT commands, you could use
+this:
+
+# Bounces: drop unsigned addresses for BATV senders
+deny senders = :
+     recipients = +batv_senders
+     message = This address does not send an unsigned reverse path
+
+# Bounces: In case of prvs-signed address, check signature.
+deny senders = :
+     condition  = ${prvscheck {$local_part@$domain}\
+                  {PRVSCHECK_SQL}{1}}
+     !condition = $prvscheck_result
+     message = Invalid reverse path signature.
+
+The first statement rejects recipients for bounce messages that are addressed
+to plain BATV sender addresses, because it is known that BATV senders do not
+send out messages with plain sender addresses. The second statement rejects
+recipients that are prvs-signed, but with invalid signatures (either because
+the key is wrong, or the signature has timed out).
+
+A non-prvs-signed address is not rejected by the second statement, because the 
+prvscheck expansion yields an empty string if its first argument is not a
+prvs-signed address, thus causing the condition condition to be false. If the
+first argument is a syntactically valid prvs-signed address, the yield is the
+third string (in this case "1"), whether or not the cryptographic and timeout
+checks succeed. The $prvscheck_result variable contains the result of the
+checks (empty for failure, "1" for success).
+
+There is one more issue you must consider when implementing prvs-signing: you
+have to ensure that the routers accept prvs-signed addresses and deliver them
+correctly. The easiest way to handle this is to use a redirect router to remove
+the signature with a configuration along these lines:
+
+batv_redirect:
+  driver = redirect
+  data = ${prvscheck {$local_part@$domain}{PRVSCHECK_SQL}}
+
+This works because, if the third argument of prvscheck is empty, the result of
+the expansion of a prvs-signed address is the decoded value of the original
+address. This router should probably be the first of your routers that handles
+local addresses.
+
+To create BATV-signed addresses in the first place, a transport of this form
+can be used:
+
+external_smtp_batv:
+  driver = smtp
+  return_path = ${prvs {$return_path} \
+                       {${lookup mysql{SELECT \
+                       secret FROM batv_prvs WHERE \
+                       sender='${quote_mysql:$sender_address}'} \
+                       {$value}fail}}}
+
+If no key can be found for the existing return path, no signing takes place.
+
+
+44.54 Using an ACL to control relaying
+--------------------------------------
+
+An MTA is said to relay a message if it receives it from some host and delivers
+it directly to another host as a result of a remote address contained within
+it. Redirecting a local address via an alias or forward file and then passing
+the message on to another host is not relaying, but a redirection as a result
+of the "percent hack" is.
+
+Two kinds of relaying exist, which are termed "incoming" and "outgoing". A host
+which is acting as a gateway or an MX backup is concerned with incoming
+relaying from arbitrary hosts to a specific set of domains. On the other hand,
+a host which is acting as a smart host for a number of clients is concerned
+with outgoing relaying from those clients to the Internet at large. Often the
+same host is fulfilling both functions, but in principle these two kinds of
+relaying are entirely independent. What is not wanted is the transmission of
+mail from arbitrary remote hosts through your system to arbitrary domains.
+
+You can implement relay control by means of suitable statements in the ACL that
+runs for each RCPT command. For convenience, it is often easiest to use Exim's
+named list facility to define the domains and hosts involved. For example,
+suppose you want to do the following:
+
+  * Deliver a number of domains to mailboxes on the local host (or process them
+    locally in some other way). Let's say these are my.dom1.example and 
+    my.dom2.example.
+
+  * Relay mail for a number of other domains for which you are the secondary
+    MX. These might be friend1.example and friend2.example.
+
+  * Relay mail from the hosts on your local LAN, to whatever domains are
+    involved. Suppose your LAN is 192.168.45.0/24.
+
+In the main part of the configuration, you put the following definitions:
+
+domainlist local_domains    = my.dom1.example : my.dom2.example
+domainlist relay_to_domains = friend1.example : friend2.example
+hostlist   relay_from_hosts = 192.168.45.0/24
+
+Now you can use these definitions in the ACL that is run for every RCPT
+command:
+
+acl_check_rcpt:
+  accept domains = +local_domains : +relay_to_domains
+  accept hosts   = +relay_from_hosts
+
+The first statement accepts any RCPT command that contains an address in the
+local or relay domains. For any other domain, control passes to the second
+statement, which accepts the command only if it comes from one of the relay
+hosts. In practice, you will probably want to make your ACL more sophisticated
+than this, for example, by including sender and recipient verification. The
+default configuration includes a more comprehensive example, which is described
+in chapter 7.
+
+
+44.55 Checking a relay configuration
+------------------------------------
+
+You can check the relay characteristics of your configuration in the same way
+that you can test any ACL behaviour for an incoming SMTP connection, by using
+the -bh option to run a fake SMTP session with which you interact.
+
+
+
+===============================================================================
+45. CONTENT SCANNING AT ACL TIME
+
+The extension of Exim to include content scanning at ACL time, formerly known
+as "exiscan", was originally implemented as a patch by Tom Kistner. The code
+was integrated into the main source for Exim release 4.50, and Tom continues to
+maintain it. Most of the wording of this chapter is taken from Tom's
+specification.
+
+It is also possible to scan the content of messages at other times. The
+local_scan() function (see chapter 46) allows for content scanning after all
+the ACLs have run. A transport filter can be used to scan messages at delivery
+time (see the transport_filter option, described in chapter 24).
+
+If you want to include the ACL-time content-scanning features when you compile
+Exim, you need to arrange for WITH_CONTENT_SCAN to be defined in your Local/
+Makefile. When you do that, the Exim binary is built with:
+
+  * Two additional ACLs (acl_smtp_mime and acl_not_smtp_mime) that are run for
+    all MIME parts for SMTP and non-SMTP messages, respectively.
+
+  * Additional ACL conditions and modifiers: decode, malware, mime_regex, regex
+    , and spam. These can be used in the ACL that is run at the end of message
+    reception (the acl_smtp_data ACL).
+
+  * An additional control feature ("no_mbox_unspool") that saves spooled copies
+    of messages, or parts of messages, for debugging purposes.
+
+  * Additional expansion variables that are set in the new ACL and by the new
+    conditions.
+
+  * Two new main configuration options: av_scanner and spamd_address.
+
+Content-scanning is continually evolving, and new features are still being
+added. While such features are still unstable and liable to incompatible
+changes, they are made available in Exim by setting options whose names begin
+EXPERIMENTAL_ in Local/Makefile. Such features are not documented in this
+manual. You can find out about them by reading the file called doc/
+experimental.txt.
+
+All the content-scanning facilities work on a MBOX copy of the message that is
+temporarily created in a file called:
+
+<spool_directory>/scan/<message_id>/<message_id>.eml
+
+The .eml extension is a friendly hint to virus scanners that they can expect an
+MBOX-like structure inside that file. The file is created when the first
+content scanning facility is called. Subsequent calls to content scanning
+conditions open the same file again. The directory is recursively removed when
+the acl_smtp_data ACL has finished running, unless
+
+control = no_mbox_unspool
+
+has been encountered. When the MIME ACL decodes files, they are put into the
+same directory by default.
+
+
+45.1 Scanning for viruses
+-------------------------
+
+The malware ACL condition lets you connect virus scanner software to Exim. It
+supports a "generic" interface to scanners called via the shell, and
+specialized interfaces for "daemon" type virus scanners, which are resident in
+memory and thus are much faster.
+
+Since message data needs to have arrived, the condition may be only called in
+ACL defined by acl_smtp_data, acl_smtp_data_prdr, acl_smtp_mime or 
+acl_smtp_dkim
+
+A timeout of 2 minutes is applied to a scanner call (by default); if it expires
+then a defer action is taken.
+
+You can set the av_scanner option in the main part of the configuration to
+specify which scanner to use, together with any additional options that are
+needed. The basic syntax is as follows:
+
+av_scanner = <scanner-type>:<option1>:<option2>:[...]
+
+If you do not set av_scanner, it defaults to
+
+av_scanner = sophie:/var/run/sophie
+
+If the value of av_scanner starts with a dollar character, it is expanded
+before use. The usual list-parsing of the content (see 6.20) applies. The
+following scanner types are supported in this release, though individual ones
+can be included or not at build time:
+
+avast
+
+    This is the scanner daemon of Avast. It has been tested with Avast Core
+    Security (currently at version 2.2.0). You can get a trial version at 
+    https://www.avast.com or for Linux at https://www.avast.com/
+    linux-server-antivirus. This scanner type takes one option, which can be
+    either a full path to a UNIX socket, or host and port specifiers separated
+    by white space. The host may be a name or an IP address; the port is either
+    a single number or a pair of numbers with a dash between. A list of options
+    may follow. These options are interpreted on the Exim's side of the malware
+    scanner, or are given on separate lines to the daemon as options before the
+    main scan command.
+
+    If "pass_unscanned" is set, any files the Avast scanner can't scan (e.g.
+    decompression bombs, or invalid archives) are considered clean. Use with
+    care.
+
+    For example:
+
+    av_scanner = avast:/var/run/avast/scan.sock:FLAGS -fullfiles:SENSITIVITY -pup
+    av_scanner = avast:/var/run/avast/scan.sock:pass_unscanned:FLAGS -fullfiles:SENSITIVITY -pup
+    av_scanner = avast:192.168.2.22 5036
+
+    If you omit the argument, the default path /var/run/avast/scan.sock is
+    used. If you use a remote host, you need to make Exim's spool directory
+    available to it, as the scanner is passed a file path, not file contents.
+    For information about available commands and their options you may use
+
+    $ socat UNIX:/var/run/avast/scan.sock STDIO:
+        FLAGS
+        SENSITIVITY
+        PACK
+
+    If the scanner returns a temporary failure (e.g. license issues, or
+    permission problems), the message is deferred and a paniclog entry is
+    written. The usual "defer_ok" option is available.
+
+aveserver
+
+    This is the scanner daemon of Kaspersky Version 5. You can get a trial
+    version at https://www.kaspersky.com/. This scanner type takes one option,
+    which is the path to the daemon's UNIX socket. The default is shown in this
+    example:
+
+    av_scanner = aveserver:/var/run/aveserver
+
+clamd
+
+    This daemon-type scanner is GPL and free. You can get it at https://
+    www.clamav.net/. Some older versions of clamd do not seem to unpack MIME
+    containers, so it used to be recommended to unpack MIME attachments in the
+    MIME ACL. This is no longer believed to be necessary.
+
+    The options are a list of server specifiers, which may be a UNIX socket
+    specification, a TCP socket specification, or a (global) option.
+
+    A socket specification consists of a space-separated list. For a Unix
+    socket the first element is a full path for the socket, for a TCP socket
+    the first element is the IP address and the second a port number, Any
+    further elements are per-server (non-global) options. These per-server
+    options are supported:
+
+    retry=<timespec>        Retry on connect fail
+
+    The "retry" option specifies a time after which a single retry for a failed
+    connect is made. The default is to not retry.
+
+    If a Unix socket file is specified, only one server is supported.
+
+    Examples:
+
+    av_scanner = clamd:/opt/clamd/socket
+    av_scanner = clamd:192.0.2.3 1234
+    av_scanner = clamd:192.0.2.3 1234:local
+    av_scanner = clamd:192.0.2.3 1234 retry=10s
+    av_scanner = clamd:192.0.2.3 1234 : 192.0.2.4 1234
+
+    If the value of av_scanner points to a UNIX socket file or contains the
+    "local" option, then the ClamAV interface will pass a filename containing
+    the data to be scanned, which should normally result in less I/O happening
+    and be more efficient. Normally in the TCP case, the data is streamed to
+    ClamAV as Exim does not assume that there is a common filesystem with the
+    remote host.
+
+    The final example shows that multiple TCP targets can be specified. Exim
+    will randomly use one for each incoming email (i.e. it load balances them).
+    Note that only TCP targets may be used if specifying a list of scanners; a
+    UNIX socket cannot be mixed in with TCP targets. If one of the servers
+    becomes unavailable, Exim will try the remaining one(s) until it finds one
+    that works. When a clamd server becomes unreachable, Exim will log a
+    message. Exim does not keep track of scanner state between multiple
+    messages, and the scanner selection is random, so the message will get
+    logged in the mainlog for each email that the down scanner gets chosen
+    first (message wrapped to be readable):
+
+    2013-10-09 14:30:39 1VTumd-0000Y8-BQ malware acl condition:
+       clamd: connection to localhost, port 3310 failed
+       (Connection refused)
+
+    If the option is unset, the default is /tmp/clamd. Thanks to David Saez for
+    contributing the code for this scanner.
+
+cmdline
+
+    This is the keyword for the generic command line scanner interface. It can
+    be used to attach virus scanners that are invoked from the shell. This
+    scanner type takes 3 mandatory options:
+
+     1. The full path and name of the scanner binary, with all command line
+        options, and a placeholder ("%s") for the directory to scan.
+
+     2. A regular expression to match against the STDOUT and STDERR output of
+        the virus scanner. If the expression matches, a virus was found. You
+        must make absolutely sure that this expression matches on "virus
+        found". This is called the "trigger" expression.
+
+     3. Another regular expression, containing exactly one pair of parentheses,
+        to match the name of the virus found in the scanners output. This is
+        called the "name" expression.
+
+    For example, Sophos Sweep reports a virus on a line like this:
+
+    Virus 'W32/Magistr-B' found in file ./those.bat
+
+    For the trigger expression, we can match the phrase "found in file". For
+    the name expression, we want to extract the W32/Magistr-B string, so we can
+    match for the single quotes left and right of it. Altogether, this makes
+    the configuration setting:
+
+    av_scanner = cmdline:\
+                 /path/to/sweep -ss -all -rec -archive %s:\
+                 found in file:'(.+)'
+
+drweb
+
+    The DrWeb daemon scanner (https://www.sald.ru/) interface takes one option,
+    either a full path to a UNIX socket, or host and port specifiers separated
+    by white space. The host may be a name or an IP address; the port is either
+    a single number or a pair of numbers with a dash between. For example:
+
+    av_scanner = drweb:/var/run/drwebd.sock
+    av_scanner = drweb:192.168.2.20 31337
+
+    If you omit the argument, the default path /usr/local/drweb/run/drwebd.sock
+    is used. Thanks to Alex Miller for contributing the code for this scanner.
+
+f-protd
+
+    The f-protd scanner is accessed via HTTP over TCP. One argument is taken,
+    being a space-separated hostname and port number (or port-range). For
+    example:
+
+    av_scanner = f-protd:localhost 10200-10204
+
+    If you omit the argument, the default values shown above are used.
+
+f-prot6d
+
+    The f-prot6d scanner is accessed using the FPSCAND protocol over TCP. One
+    argument is taken, being a space-separated hostname and port number. For
+    example:
+
+    av_scanner = f-prot6d:localhost 10200
+
+    If you omit the argument, the default values show above are used.
+
+fsecure
+
+    The F-Secure daemon scanner (https://www.f-secure.com/) takes one argument
+    which is the path to a UNIX socket. For example:
+
+    av_scanner = fsecure:/path/to/.fsav
+
+    If no argument is given, the default is /var/run/.fsav. Thanks to Johan
+    Thelmen for contributing the code for this scanner.
+
+kavdaemon
+
+    This is the scanner daemon of Kaspersky Version 4. This version of the
+    Kaspersky scanner is outdated. Please upgrade (see aveserver above). This
+    scanner type takes one option, which is the path to the daemon's UNIX
+    socket. For example:
+
+    av_scanner = kavdaemon:/opt/AVP/AvpCtl
+
+    The default path is /var/run/AvpCtl.
+
+mksd
+
+    This was a daemon type scanner that is aimed mainly at Polish users, though
+    some documentation was available in English. The history can be shown at 
+    https://en.wikipedia.org/wiki/Mks_vir and this appears to be a candidate
+    for removal from Exim, unless we are informed of other virus scanners which
+    use the same protocol to integrate. The only option for this scanner type
+    is the maximum number of processes used simultaneously to scan the
+    attachments, provided that mksd has been run with at least the same number
+    of child processes. For example:
+
+    av_scanner = mksd:2
+
+    You can safely omit this option (the default value is 1).
+
+sock
+
+    This is a general-purpose way of talking to simple scanner daemons running
+    on the local machine. There are four options: an address (which may be an
+    IP address and port, or the path of a Unix socket), a commandline to send
+    (may include a single %s which will be replaced with the path to the mail
+    file to be scanned), an RE to trigger on from the returned data, and an RE
+    to extract malware_name from the returned data. For example:
+
+    av_scanner = sock:127.0.0.1 6001:%s:(SPAM|VIRUS):(.*)$
+
+    Note that surrounding whitespace is stripped from each option, meaning
+    there is no way to specify a trailing newline. The socket specifier and
+    both regular-expressions are required. Default for the commandline is %s\n
+    (note this does have a trailing newline); specify an empty element to get
+    this.
+
+sophie
+
+    Sophie is a daemon that uses Sophos' libsavi library to scan for viruses.
+    You can get Sophie at http://sophie.sourceforge.net/. The only option for
+    this scanner type is the path to the UNIX socket that Sophie uses for
+    client communication. For example:
+
+    av_scanner = sophie:/tmp/sophie
+
+    The default path is /var/run/sophie, so if you are using this, you can omit
+    the option.
+
+When av_scanner is correctly set, you can use the malware condition in the DATA
+ACL. Note: You cannot use the malware condition in the MIME ACL.
+
+The av_scanner option is expanded each time malware is called. This makes it
+possible to use different scanners. See further below for an example. The 
+malware condition caches its results, so when you use it multiple times for the
+same message, the actual scanning process is only carried out once. However,
+using expandable items in av_scanner disables this caching, in which case each
+use of the malware condition causes a new scan of the message.
+
+The malware condition takes a right-hand argument that is expanded before use
+and taken as a list, slash-separated by default. The first element can then be
+one of
+
+  * "true", "*", or "1", in which case the message is scanned for viruses. The
+    condition succeeds if a virus was found, and fail otherwise. This is the
+    recommended usage.
+
+  * "false" or "0" or an empty string, in which case no scanning is done and
+    the condition fails immediately.
+
+  * A regular expression, in which case the message is scanned for viruses. The
+    condition succeeds if a virus is found and its name matches the regular
+    expression. This allows you to take special actions on certain types of
+    virus. Note that "/" characters in the RE must be doubled due to the
+    list-processing, unless the separator is changed (in the usual way 6.21).
+
+You can append a "defer_ok" element to the malware argument list to accept
+messages even if there is a problem with the virus scanner. Otherwise, such a
+problem causes the ACL to defer.
+
+You can append a "tmo=<val>" element to the malware argument list to specify a
+non-default timeout. The default is two minutes. For example:
+
+malware = * / defer_ok / tmo=10s
+
+A timeout causes the ACL to defer.
+
+When a connection is made to the scanner the expansion variable
+$callout_address is set to record the actual address used.
+
+When a virus is found, the condition sets up an expansion variable called
+$malware_name that contains the name of the virus. You can use it in a message
+modifier that specifies the error returned to the sender, and/or in logging
+data.
+
+Beware the interaction of Exim's message_size_limit with any size limits
+imposed by your anti-virus scanner.
+
+Here is a very simple scanning example:
+
+deny malware = *
+     message = This message contains malware ($malware_name)
+
+The next example accepts messages when there is a problem with the scanner:
+
+deny malware = */defer_ok
+     message = This message contains malware ($malware_name)
+
+The next example shows how to use an ACL variable to scan with both sophie and
+aveserver. It assumes you have set:
+
+av_scanner = $acl_m0
+
+in the main Exim configuration.
+
+deny set acl_m0 = sophie
+     malware = *
+     message = This message contains malware ($malware_name)
+
+deny set acl_m0 = aveserver
+     malware = *
+     message = This message contains malware ($malware_name)
+
+
+45.2 Scanning with SpamAssassin and Rspamd
+------------------------------------------
+
+The spam ACL condition calls SpamAssassin's spamd daemon to get a spam score
+and a report for the message. Support is also provided for Rspamd.
+
+For more information about installation and configuration of SpamAssassin or
+Rspamd refer to their respective websites at https://spamassassin.apache.org/
+and https://www.rspamd.com/
+
+SpamAssassin can be installed with CPAN by running:
+
+perl -MCPAN -e 'install Mail::SpamAssassin'
+
+SpamAssassin has its own set of configuration files. Please review its
+documentation to see how you can tweak it. The default installation should work
+nicely, however.
+
+By default, SpamAssassin listens on 127.0.0.1, TCP port 783 and if you intend
+to use an instance running on the local host you do not need to set 
+spamd_address. If you intend to use another host or port for SpamAssassin, you
+must set the spamd_address option in the global part of the Exim configuration
+as follows (example):
+
+spamd_address = 192.168.99.45 783
+
+The SpamAssassin protocol relies on a TCP half-close from the client. If your
+SpamAssassin client side is running a Linux system with an iptables firewall,
+consider setting net.netfilter.nf_conntrack_tcp_timeout_close_wait to at least
+the timeout, Exim uses when waiting for a response from the SpamAssassin server
+(currently defaulting to 120s). With a lower value the Linux connection
+tracking may consider your half-closed connection as dead too soon.
+
+To use Rspamd (which by default listens on all local addresses on TCP port
+11333) you should add variant=rspamd after the address/port pair, for example:
+
+spamd_address = 127.0.0.1 11333 variant=rspamd
+
+As of version 2.60, SpamAssassin also supports communication over UNIX sockets.
+If you want to us these, supply spamd_address with an absolute filename instead
+of an address/port pair:
+
+spamd_address = /var/run/spamd_socket
+
+You can have multiple spamd servers to improve scalability. These can reside on
+other hardware reachable over the network. To specify multiple spamd servers,
+put multiple address/port pairs in the spamd_address option, separated with
+colons (the separator can be changed in the usual way 6.21):
+
+spamd_address = 192.168.2.10 783 : \
+                192.168.2.11 783 : \
+                192.168.2.12 783
+
+Up to 32 spamd servers are supported. When a server fails to respond to the
+connection attempt, all other servers are tried until one succeeds. If no
+server responds, the spam condition defers.
+
+Unix and TCP socket specifications may be mixed in any order. Each element of
+the list is a list itself, space-separated by default and changeable in the
+usual way (6.21); take care to not double the separator.
+
+For TCP socket specifications a host name or IP (v4 or v6, but subject to
+list-separator quoting rules) address can be used, and the port can be one or a
+dash-separated pair. In the latter case, the range is tried in strict order.
+
+Elements after the first for Unix sockets, or second for TCP socket, are
+options. The supported options are:
+
+pri=<priority>      Selection priority
+weight=<value>      Selection bias
+time=<start>-<end>  Use only between these times of day
+retry=<timespec>    Retry on connect fail
+tmo=<timespec>      Connection time limit
+variant=rspamd      Use Rspamd rather than SpamAssassin protocol
+
+The "pri" option specifies a priority for the server within the list, higher
+values being tried first. The default priority is 1.
+
+The "weight" option specifies a selection bias. Within a priority set servers
+are queried in a random fashion, weighted by this value. The default value for
+selection bias is 1.
+
+Time specifications for the "time" option are <hour>.<minute>.<second> in the
+local time zone; each element being one or more digits. Either the seconds or
+both minutes and seconds, plus the leading "." characters, may be omitted and
+will be taken as zero.
+
+Timeout specifications for the "retry" and "tmo" options are the usual Exim
+time interval standard, e.g. "20s" or "1m".
+
+The "tmo" option specifies an overall timeout for communication. The default
+value is two minutes.
+
+The "retry" option specifies a time after which a single retry for a failed
+connect is made. The default is to not retry.
+
+The spamd_address variable is expanded before use if it starts with a dollar
+sign. In this case, the expansion may return a string that is used as the list
+so that multiple spamd servers can be the result of an expansion.
+
+When a connection is made to the server the expansion variable $callout_address
+is set to record the actual address used.
+
+
+45.3 Calling SpamAssassin from an Exim ACL
+------------------------------------------
+
+Here is a simple example of the use of the spam condition in a DATA ACL:
+
+deny spam = joe
+     message = This message was classified as SPAM
+
+The right-hand side of the spam condition specifies a name. This is relevant if
+you have set up multiple SpamAssassin profiles. If you do not want to scan
+using a specific profile, but rather use the SpamAssassin system-wide default
+profile, you can scan for an unknown name, or simply use "nobody". Rspamd does
+not use this setting. However, you must put something on the right-hand side.
+
+The name allows you to use per-domain or per-user antispam profiles in
+principle, but this is not straightforward in practice, because a message may
+have multiple recipients, not necessarily all in the same domain. Because the 
+spam condition has to be called from a DATA-time ACL in order to be able to
+read the contents of the message, the variables $local_part and $domain are not
+set. Careful enforcement of single-recipient messages (e.g. by responding with
+defer in the recipient ACL for all recipients after the first), or the use of
+PRDR, are needed to use this feature.
+
+The right-hand side of the spam condition is expanded before being used, so you
+can put lookups or conditions there. When the right-hand side evaluates to "0"
+or "false", no scanning is done and the condition fails immediately.
+
+Scanning with SpamAssassin uses a lot of resources. If you scan every message,
+large ones may cause significant performance degradation. As most spam messages
+are quite small, it is recommended that you do not scan the big ones. For
+example:
+
+deny condition = ${if < {$message_size}{10K}}
+     spam = nobody
+     message = This message was classified as SPAM
+
+The spam condition returns true if the threshold specified in the user's
+SpamAssassin profile has been matched or exceeded. If you want to use the spam
+condition for its side effects (see the variables below), you can make it
+always return "true" by appending ":true" to the username.
+
+When the spam condition is run, it sets up a number of expansion variables.
+Except for $spam_report, these variables are saved with the received message so
+are available for use at delivery time.
+
+$spam_score
+
+    The spam score of the message, for example, "3.4" or "30.5". This is useful
+    for inclusion in log or reject messages.
+
+$spam_score_int
+
+    The spam score of the message, multiplied by ten, as an integer value. For
+    example "34" or "305". It may appear to disagree with $spam_score because
+    $spam_score is rounded and $spam_score_int is truncated. The integer value
+    is useful for numeric comparisons in conditions.
+
+$spam_bar
+
+    A string consisting of a number of "+" or "-" characters, representing the
+    integer part of the spam score value. A spam score of 4.4 would have a
+    $spam_bar value of "++++". This is useful for inclusion in warning headers,
+    since MUAs can match on such strings. The maximum length of the spam bar is
+    50 characters.
+
+$spam_report
+
+    A multiline text table, containing the full SpamAssassin report for the
+    message. Useful for inclusion in headers or reject messages. This variable
+    is only usable in a DATA-time ACL. Beware that SpamAssassin may return
+    non-ASCII characters, especially when running in country-specific locales,
+    which are not legal unencoded in headers.
+
+$spam_action
+
+    For SpamAssassin either 'reject' or 'no action' depending on the spam score
+    versus threshold. For Rspamd, the recommended action.
+
+The spam condition caches its results unless expansion in spamd_address was
+used. If you call it again with the same user name, it does not scan again, but
+rather returns the same values as before.
+
+The spam condition returns DEFER if there is any error while running the
+message through SpamAssassin or if the expansion of spamd_address failed. If
+you want to treat DEFER as FAIL (to pass on to the next ACL statement block),
+append "/defer_ok" to the right-hand side of the spam condition, like this:
+
+deny spam    = joe/defer_ok
+     message = This message was classified as SPAM
+
+This causes messages to be accepted even if there is a problem with spamd.
+
+Here is a longer, commented example of the use of the spam condition:
+
+# put headers in all messages (no matter if spam or not)
+warn  spam = nobody:true
+      add_header = X-Spam-Score: $spam_score ($spam_bar)
+      add_header = X-Spam-Report: $spam_report
+
+# add second subject line with *SPAM* marker when message
+# is over threshold
+warn  spam = nobody
+      add_header = Subject: *SPAM* $h_Subject:
+
+# reject spam at high scores (> 12)
+deny  spam = nobody:true
+      condition = ${if >{$spam_score_int}{120}{1}{0}}
+      message = This message scored $spam_score spam points.
+
+
+45.4 Scanning MIME parts
+------------------------
+
+The acl_smtp_mime global option specifies an ACL that is called once for each
+MIME part of an SMTP message, including multipart types, in the sequence of
+their position in the message. Similarly, the acl_not_smtp_mime option
+specifies an ACL that is used for the MIME parts of non-SMTP messages. These
+options may both refer to the same ACL if you want the same processing in both
+cases.
+
+These ACLs are called (possibly many times) just before the acl_smtp_data ACL
+in the case of an SMTP message, or just before the acl_not_smtp ACL in the case
+of a non-SMTP message. However, a MIME ACL is called only if the message
+contains a Content-Type: header line. When a call to a MIME ACL does not yield
+"accept", ACL processing is aborted and the appropriate result code is sent to
+the client. In the case of an SMTP message, the acl_smtp_data ACL is not called
+when this happens.
+
+You cannot use the malware or spam conditions in a MIME ACL; these can only be
+used in the DATA or non-SMTP ACLs. However, you can use the regex condition to
+match against the raw MIME part. You can also use the mime_regex condition to
+match against the decoded MIME part (see section 45.5).
+
+At the start of a MIME ACL, a number of variables are set from the header
+information for the relevant MIME part. These are described below. The contents
+of the MIME part are not by default decoded into a disk file except for MIME
+parts whose content-type is "message/rfc822". If you want to decode a MIME part
+into a disk file, you can use the decode condition. The general syntax is:
+
+decode = [/<path>/]<filename>
+
+The right hand side is expanded before use. After expansion, the value can be:
+
+ 1. "0" or "false", in which case no decoding is done.
+
+ 2. The string "default". In that case, the file is put in the temporary
+    "default" directory <spool_directory>/scan/<message_id>/ with a sequential
+    filename consisting of the message id and a sequence number. The full path
+    and name is available in $mime_decoded_filename after decoding.
+
+ 3. A full path name starting with a slash. If the full name is an existing
+    directory, it is used as a replacement for the default directory. The
+    filename is then sequentially assigned. If the path does not exist, it is
+    used as the full path and filename.
+
+ 4. If the string does not start with a slash, it is used as the filename, and
+    the default path is then used.
+
+The decode condition normally succeeds. It is only false for syntax errors or
+unusual circumstances such as memory shortages. You can easily decode a file
+with its original, proposed filename using
+
+decode = $mime_filename
+
+However, you should keep in mind that $mime_filename might contain anything. If
+you place files outside of the default path, they are not automatically
+unlinked.
+
+For RFC822 attachments (these are messages attached to messages, with a
+content-type of "message/rfc822"), the ACL is called again in the same manner
+as for the primary message, only that the $mime_is_rfc822 expansion variable is
+set (see below). Attached messages are always decoded to disk before being
+checked, and the files are unlinked once the check is done.
+
+The MIME ACL supports the regex and mime_regex conditions. These can be used to
+match regular expressions against raw and decoded MIME parts, respectively.
+They are described in section 45.5.
+
+The following list describes all expansion variables that are available in the
+MIME ACL:
+
+$mime_anomaly_level, $mime_anomaly_text
+
+    If there are problems decoding, these variables contain information on the
+    detected issue.
+
+$mime_boundary
+
+    If the current part is a multipart (see $mime_is_multipart below), it
+    should have a boundary string, which is stored in this variable. If the
+    current part has no boundary parameter in the Content-Type: header, this
+    variable contains the empty string.
+
+$mime_charset
+
+    This variable contains the character set identifier, if one was found in
+    the Content-Type: header. Examples for charset identifiers are:
+
+    us-ascii
+    gb2312 (Chinese)
+    iso-8859-1
+
+    Please note that this value is not normalized, so you should do matches
+    case-insensitively.
+
+$mime_content_description
+
+    This variable contains the normalized content of the Content-Description:
+    header. It can contain a human-readable description of the parts content.
+    Some implementations repeat the filename for attachments here, but they are
+    usually only used for display purposes.
+
+$mime_content_disposition
+
+    This variable contains the normalized content of the Content-Disposition:
+    header. You can expect strings like "attachment" or "inline" here.
+
+$mime_content_id
+
+    This variable contains the normalized content of the Content-ID: header.
+    This is a unique ID that can be used to reference a part from another part.
+
+$mime_content_size
+
+    This variable is set only after the decode modifier (see above) has been
+    successfully run. It contains the size of the decoded part in kilobytes.
+    The size is always rounded up to full kilobytes, so only a completely empty
+    part has a $mime_content_size of zero.
+
+$mime_content_transfer_encoding
+
+    This variable contains the normalized content of the 
+    Content-transfer-encoding: header. This is a symbolic name for an encoding
+    type. Typical values are "base64" and "quoted-printable".
+
+$mime_content_type
+
+    If the MIME part has a Content-Type: header, this variable contains its
+    value, lowercased, and without any options (like "name" or "charset"). Here
+    are some examples of popular MIME types, as they may appear in this
+    variable:
+
+    text/plain
+    text/html
+    application/octet-stream
+    image/jpeg
+    audio/midi
+
+    If the MIME part has no Content-Type: header, this variable contains the
+    empty string.
+
+$mime_decoded_filename
+
+    This variable is set only after the decode modifier (see above) has been
+    successfully run. It contains the full path and filename of the file
+    containing the decoded data.
+
+$mime_filename
+
+    This is perhaps the most important of the MIME variables. It contains a
+    proposed filename for an attachment, if one was found in either the 
+    Content-Type: or Content-Disposition: headers. The filename will be RFC2047
+    or RFC2231 decoded, but no additional sanity checks are done. If no
+    filename was found, this variable contains the empty string.
+
+$mime_is_coverletter
+
+    This variable attempts to differentiate the "cover letter" of an e-mail
+    from attached data. It can be used to clamp down on flashy or unnecessarily
+    encoded content in the cover letter, while not restricting attachments at
+    all.
+
+    The variable contains 1 (true) for a MIME part believed to be part of the
+    cover letter, and 0 (false) for an attachment. At present, the algorithm is
+    as follows:
+
+     1. The outermost MIME part of a message is always a cover letter.
+
+     2. If a multipart/alternative or multipart/related MIME part is a cover
+        letter, so are all MIME subparts within that multipart.
+
+     3. If any other multipart is a cover letter, the first subpart is a cover
+        letter, and the rest are attachments.
+
+     4. All parts contained within an attachment multipart are attachments.
+
+    As an example, the following will ban "HTML mail" (including that sent with
+    alternative plain text), while allowing HTML files to be attached. HTML
+    coverletter mail attached to non-HTML coverletter mail will also be
+    allowed:
+
+    deny !condition = $mime_is_rfc822
+         condition = $mime_is_coverletter
+         condition = ${if eq{$mime_content_type}{text/html}{1}{0}}
+         message = HTML mail is not accepted here
+
+$mime_is_multipart
+
+    This variable has the value 1 (true) when the current part has the main
+    type "multipart", for example, "multipart/alternative" or "multipart/
+    mixed". Since multipart entities only serve as containers for other parts,
+    you may not want to carry out specific actions on them.
+
+$mime_is_rfc822
+
+    This variable has the value 1 (true) if the current part is not a part of
+    the checked message itself, but part of an attached message. Attached
+    message decoding is fully recursive.
+
+$mime_part_count
+
+    This variable is a counter that is raised for each processed MIME part. It
+    starts at zero for the very first part (which is usually a multipart). The
+    counter is per-message, so it is reset when processing RFC822 attachments
+    (see $mime_is_rfc822). The counter stays set after acl_smtp_mime is
+    complete, so you can use it in the DATA ACL to determine the number of MIME
+    parts of a message. For non-MIME messages, this variable contains the value
+    -1.
+
+
+45.5 Scanning with regular expressions
+--------------------------------------
+
+You can specify your own custom regular expression matches on the full body of
+the message, or on individual MIME parts.
+
+The regex condition takes one or more regular expressions as arguments and
+matches them against the full message (when called in the DATA ACL) or a raw
+MIME part (when called in the MIME ACL). The regex condition matches linewise,
+with a maximum line length of 32K characters. That means you cannot have
+multiline matches with the regex condition.
+
+The mime_regex condition can be called only in the MIME ACL. It matches up to
+32K of decoded content (the whole content at once, not linewise). If the part
+has not been decoded with the decode modifier earlier in the ACL, it is decoded
+automatically when mime_regex is executed (using default path and filename
+values). If the decoded data is larger than 32K, only the first 32K characters
+are checked.
+
+The regular expressions are passed as a colon-separated list. To include a
+literal colon, you must double it. Since the whole right-hand side string is
+expanded before being used, you must also escape dollar signs and backslashes
+with more backslashes, or use the "\N" facility to disable expansion. Here is a
+simple example that contains two regular expressions:
+
+deny regex = [Mm]ortgage : URGENT BUSINESS PROPOSAL
+     message = contains blacklisted regex ($regex_match_string)
+
+The conditions returns true if any one of the regular expressions matches. The
+$regex_match_string expansion variable is then set up and contains the matching
+regular expression. The expansion variables $regex1 $regex2 etc are set to any
+substrings captured by the regular expression.
+
+Warning: With large messages, these conditions can be fairly CPU-intensive.
+
+
+
+===============================================================================
+46. ADDING A LOCAL SCAN FUNCTION TO EXIM
+
+In these days of email worms, viruses, and ever-increasing spam, some sites
+want to apply a lot of checking to messages before accepting them.
+
+The content scanning extension (chapter 45) has facilities for passing messages
+to external virus and spam scanning software. You can also do a certain amount
+in Exim itself through string expansions and the condition condition in the ACL
+that runs after the SMTP DATA command or the ACL for non-SMTP messages (see
+chapter 44), but this has its limitations.
+
+To allow for further customization to a site's own requirements, there is the
+possibility of linking Exim with a private message scanning function, written
+in C. If you want to run code that is written in something other than C, you
+can of course use a little C stub to call it.
+
+The local scan function is run once for every incoming message, at the point
+when Exim is just about to accept the message. It can therefore be used to
+control non-SMTP messages from local processes as well as messages arriving via
+SMTP.
+
+Exim applies a timeout to calls of the local scan function, and there is an
+option called local_scan_timeout for setting it. The default is 5 minutes. Zero
+means "no timeout". Exim also sets up signal handlers for SIGSEGV, SIGILL,
+SIGFPE, and SIGBUS before calling the local scan function, so that the most
+common types of crash are caught. If the timeout is exceeded or one of those
+signals is caught, the incoming message is rejected with a temporary error if
+it is an SMTP message. For a non-SMTP message, the message is dropped and Exim
+ends with a non-zero code. The incident is logged on the main and reject logs.
+
+
+46.1 Building Exim to use a local scan function
+-----------------------------------------------
+
+To make use of the local scan function feature, you must tell Exim where your
+function is before building Exim, by setting both HAVE_LOCAL_SCAN and
+LOCAL_SCAN_SOURCE in your Local/Makefile. A recommended place to put it is in
+the Local directory, so you might set
+
+HAVE_LOCAL_SCAN=yes
+LOCAL_SCAN_SOURCE=Local/local_scan.c
+
+for example. The function must be called local_scan(); the source file(s) for
+it should first #define LOCAL_SCAN and then #include "local_scan.h". It is
+called by Exim after it has received a message, when the success return code is
+about to be sent. This is after all the ACLs have been run. The return code
+from your function controls whether the message is actually accepted or not.
+There is a commented template function (that just accepts the message) in the
+file _src/local_scan.c_.
+
+If you want to make use of Exim's runtime configuration file to set options for
+your local_scan() function, you must also set
+
+LOCAL_SCAN_HAS_OPTIONS=yes
+
+in Local/Makefile (see section 46.3 below).
+
+
+46.2 API for local_scan()
+-------------------------
+
+You must include this line near the start of your code:
+
+#define LOCAL_SCAN
+#include "local_scan.h"
+
+This header file defines a number of variables and other values, and the
+prototype for the function itself. Exim is coded to use unsigned char values
+almost exclusively, and one of the things this header defines is a shorthand
+for "unsigned char" called "uschar". It also makes available the following
+macro definitions, to simplify casting character strings and pointers to
+character strings:
+
+#define CS   (char *)
+#define CCS  (const char *)
+#define CSS  (char **)
+#define US   (unsigned char *)
+#define CUS  (const unsigned char *)
+#define USS  (unsigned char **)
+
+The function prototype for local_scan() is:
+
+extern int local_scan(int fd, uschar **return_text);
+
+The arguments are as follows:
+
+  * fd is a file descriptor for the file that contains the body of the message
+    (the -D file). The file is open for reading and writing, but updating it is
+    not recommended. Warning: You must not close this file descriptor.
+
+    The descriptor is positioned at character 19 of the file, which is the
+    first character of the body itself, because the first 19 characters are the
+    message id followed by "-D" and a newline. If you rewind the file, you
+    should use the macro SPOOL_DATA_START_OFFSET to reset to the start of the
+    data, just in case this changes in some future version.
+
+  * return_text is an address which you can use to return a pointer to a text
+    string at the end of the function. The value it points to on entry is NULL.
+
+The function must return an int value which is one of the following macros:
+
+"LOCAL_SCAN_ACCEPT"
+
+    The message is accepted. If you pass back a string of text, it is saved
+    with the message, and made available in the variable $local_scan_data. No
+    newlines are permitted (if there are any, they are turned into spaces) and
+    the maximum length of text is 1000 characters.
+
+"LOCAL_SCAN_ACCEPT_FREEZE"
+
+    This behaves as LOCAL_SCAN_ACCEPT, except that the accepted message is
+    queued without immediate delivery, and is frozen.
+
+"LOCAL_SCAN_ACCEPT_QUEUE"
+
+    This behaves as LOCAL_SCAN_ACCEPT, except that the accepted message is
+    queued without immediate delivery.
+
+"LOCAL_SCAN_REJECT"
+
+    The message is rejected; the returned text is used as an error message
+    which is passed back to the sender and which is also logged. Newlines are
+    permitted - they cause a multiline response for SMTP rejections, but are
+    converted to "\n" in log lines. If no message is given, "Administrative
+    prohibition" is used.
+
+"LOCAL_SCAN_TEMPREJECT"
+
+    The message is temporarily rejected; the returned text is used as an error
+    message as for LOCAL_SCAN_REJECT. If no message is given, "Temporary local
+    problem" is used.
+
+"LOCAL_SCAN_REJECT_NOLOGHDR"
+
+    This behaves as LOCAL_SCAN_REJECT, except that the header of the rejected
+    message is not written to the reject log. It has the effect of unsetting
+    the rejected_header log selector for just this rejection. If 
+    rejected_header is already unset (see the discussion of the log_selection
+    option in section 53.15), this code is the same as LOCAL_SCAN_REJECT.
+
+"LOCAL_SCAN_TEMPREJECT_NOLOGHDR"
+
+    This code is a variation of LOCAL_SCAN_TEMPREJECT in the same way that
+    LOCAL_SCAN_REJECT_NOLOGHDR is a variation of LOCAL_SCAN_REJECT.
+
+If the message is not being received by interactive SMTP, rejections are
+reported by writing to stderr or by sending an email, as configured by the -oe
+command line options.
+
+
+46.3 Configuration options for local_scan()
+-------------------------------------------
+
+It is possible to have option settings in the main configuration file that set
+values in static variables in the local_scan() module. If you want to do this,
+you must have the line
+
+LOCAL_SCAN_HAS_OPTIONS=yes
+
+in your Local/Makefile when you build Exim. (This line is in OS/
+Makefile-Default, commented out). Then, in the local_scan() source file, you
+must define static variables to hold the option values, and a table to define
+them.
+
+The table must be a vector called local_scan_options, of type "optionlist".
+Each entry is a triplet, consisting of a name, an option type, and a pointer to
+the variable that holds the value. The entries must appear in alphabetical
+order. Following local_scan_options you must also define a variable called 
+local_scan_options_count that contains the number of entries in the table. Here
+is a short example, showing two kinds of option:
+
+static int my_integer_option = 42;
+static uschar *my_string_option = US"a default string";
+
+optionlist local_scan_options[] = {
+  { "my_integer", opt_int,       &my_integer_option },
+  { "my_string",  opt_stringptr, &my_string_option }
+};
+
+int local_scan_options_count =
+  sizeof(local_scan_options)/sizeof(optionlist);
+
+The values of the variables can now be changed from Exim's runtime
+configuration file by including a local scan section as in this example:
+
+begin local_scan
+my_integer = 99
+my_string = some string of text...
+
+The available types of option data are as follows:
+
+opt_bool
+
+    This specifies a boolean (true/false) option. The address should point to a
+    variable of type "BOOL", which will be set to TRUE or FALSE, which are
+    macros that are defined as "1" and "0", respectively. If you want to detect
+    whether such a variable has been set at all, you can initialize it to
+    TRUE_UNSET. (BOOL variables are integers underneath, so can hold more than
+    two values.)
+
+opt_fixed
+
+    This specifies a fixed point number, such as is used for load averages. The
+    address should point to a variable of type "int". The value is stored
+    multiplied by 1000, so, for example, 1.4142 is truncated and stored as
+    1414.
+
+opt_int
+
+    This specifies an integer; the address should point to a variable of type
+    "int". The value may be specified in any of the integer formats accepted by
+    Exim.
+
+opt_mkint
+
+    This is the same as opt_int, except that when such a value is output in a 
+    -bP listing, if it is an exact number of kilobytes or megabytes, it is
+    printed with the suffix K or M.
+
+opt_octint
+
+    This also specifies an integer, but the value is always interpreted as an
+    octal integer, whether or not it starts with the digit zero, and it is
+    always output in octal.
+
+opt_stringptr
+
+    This specifies a string value; the address must be a pointer to a variable
+    that points to a string (for example, of type "uschar *").
+
+opt_time
+
+    This specifies a time interval value. The address must point to a variable
+    of type "int". The value that is placed there is a number of seconds.
+
+If the -bP command line option is followed by "local_scan", Exim prints out the
+values of all the local_scan() options.
+
+
+46.4 Available Exim variables
+-----------------------------
+
+The header local_scan.h gives you access to a number of C variables. These are
+the only ones that are guaranteed to be maintained from release to release.
+Note, however, that you can obtain the value of any Exim expansion variable,
+including $recipients, by calling expand_string(). The exported C variables are
+as follows:
+
+int body_linecount
+
+    This variable contains the number of lines in the message's body. It is not
+    valid if the spool_wireformat option is used.
+
+int body_zerocount
+
+    This variable contains the number of binary zero bytes in the message's
+    body. It is not valid if the spool_wireformat option is used.
+
+unsigned int debug_selector
+
+    This variable is set to zero when no debugging is taking place. Otherwise,
+    it is a bitmap of debugging selectors. Two bits are identified for use in
+    local_scan(); they are defined as macros:
+
+      o The "D_v" bit is set when -v was present on the command line. This is a
+        testing option that is not privileged - any caller may set it. All the
+        other selector bits can be set only by admin users.
+
+      o The "D_local_scan" bit is provided for use by local_scan(); it is set
+        by the "+local_scan" debug selector. It is not included in the default
+        set of debugging bits.
+
+    Thus, to write to the debugging output only when "+local_scan" has been
+    selected, you should use code like this:
+
+    if ((debug_selector & D_local_scan) != 0)
+      debug_printf("xxx", ...);
+
+uschar *expand_string_message
+
+    After a failing call to expand_string() (returned value NULL), the variable
+    expand_string_message contains the error message, zero-terminated.
+
+header_line *header_list
+
+    A pointer to a chain of header lines. The header_line structure is
+    discussed below.
+
+header_line *header_last
+
+    A pointer to the last of the header lines.
+
+const uschar *headers_charset
+
+    The value of the headers_charset configuration option.
+
+BOOL host_checking
+
+    This variable is TRUE during a host checking session that is initiated by
+    the -bh command line option.
+
+uschar *interface_address
+
+    The IP address of the interface that received the message, as a string.
+    This is NULL for locally submitted messages.
+
+int interface_port
+
+    The port on which this message was received. When testing with the -bh
+    command line option, the value of this variable is -1 unless a port has
+    been specified via the -oMi option.
+
+uschar *message_id
+
+    This variable contains Exim's message id for the incoming message (the
+    value of $message_exim_id) as a zero-terminated string.
+
+uschar *received_protocol
+
+    The name of the protocol by which the message was received.
+
+int recipients_count
+
+    The number of accepted recipients.
+
+recipient_item *recipients_list
+
+    The list of accepted recipients, held in a vector of length 
+    recipients_count. The recipient_item structure is discussed below. You can
+    add additional recipients by calling receive_add_recipient() (see below).
+    You can delete recipients by removing them from the vector and adjusting
+    the value in recipients_count. In particular, by setting recipients_count
+    to zero you remove all recipients. If you then return the value
+    "LOCAL_SCAN_ACCEPT", the message is accepted, but immediately blackholed.
+    To replace the recipients, you can set recipients_count to zero and then
+    call receive_add_recipient() as often as needed.
+
+uschar *sender_address
+
+    The envelope sender address. For bounce messages this is the empty string.
+
+uschar *sender_host_address
+
+    The IP address of the sending host, as a string. This is NULL for
+    locally-submitted messages.
+
+uschar *sender_host_authenticated
+
+    The name of the authentication mechanism that was used, or NULL if the
+    message was not received over an authenticated SMTP connection.
+
+uschar *sender_host_name
+
+    The name of the sending host, if known.
+
+int sender_host_port
+
+    The port on the sending host.
+
+BOOL smtp_input
+
+    This variable is TRUE for all SMTP input, including BSMTP.
+
+BOOL smtp_batched_input
+
+    This variable is TRUE for BSMTP input.
+
+int store_pool
+
+    The contents of this variable control which pool of memory is used for new
+    requests. See section 46.8 for details.
+
+
+46.5 Structure of header lines
+------------------------------
+
+The header_line structure contains the members listed below. You can add
+additional header lines by calling the header_add() function (see below). You
+can cause header lines to be ignored (deleted) by setting their type to *.
+
+struct header_line *next
+
+    A pointer to the next header line, or NULL for the last line.
+
+int type
+
+    A code identifying certain headers that Exim recognizes. The codes are
+    printing characters, and are documented in chapter 57 of this manual.
+    Notice in particular that any header line whose type is * is not
+    transmitted with the message. This flagging is used for header lines that
+    have been rewritten, or are to be removed (for example, Envelope-sender:
+    header lines.) Effectively, * means "deleted".
+
+int slen
+
+    The number of characters in the header line, including the terminating and
+    any internal newlines.
+
+uschar *text
+
+    A pointer to the text of the header. It always ends with a newline,
+    followed by a zero byte. Internal newlines are preserved.
+
+
+46.6 Structure of recipient items
+---------------------------------
+
+The recipient_item structure contains these members:
+
+uschar *address
+
+    This is a pointer to the recipient address as it was received.
+
+int pno
+
+    This is used in later Exim processing when top level addresses are created
+    by the one_time option. It is not relevant at the time local_scan() is run
+    and must always contain -1 at this stage.
+
+uschar *errors_to
+
+    If this value is not NULL, bounce messages caused by failing to deliver to
+    the recipient are sent to the address it contains. In other words, it
+    overrides the envelope sender for this one recipient. (Compare the 
+    errors_to generic router option.) If a local_scan() function sets an 
+    errors_to field to an unqualified address, Exim qualifies it using the
+    domain from qualify_recipient. When local_scan() is called, the errors_to
+    field is NULL for all recipients.
+
+
+46.7 Available Exim functions
+-----------------------------
+
+The header local_scan.h gives you access to a number of Exim functions. These
+are the only ones that are guaranteed to be maintained from release to release:
+
+pid_t child_open
+(uschar **argv, uschar **envp, int newumask, int *infdptr, int *outfdptr,
+  BOOL make_leader)
+
+    This function creates a child process that runs the command specified by 
+    argv. The environment for the process is specified by envp, which can be
+    NULL if no environment variables are to be passed. A new umask is supplied
+    for the process in newumask.
+
+    Pipes to the standard input and output of the new process are set up and
+    returned to the caller via the infdptr and outfdptr arguments. The standard
+    error is cloned to the standard output. If there are any file descriptors
+    "in the way" in the new process, they are closed. If the final argument is
+    TRUE, the new process is made into a process group leader.
+
+    The function returns the pid of the new process, or -1 if things go wrong.
+
+int child_close(pid_t pid, int timeout)
+
+    This function waits for a child process to terminate, or for a timeout (in
+    seconds) to expire. A timeout value of zero means wait as long as it takes.
+    The return value is as follows:
+
+      o >= 0
+
+        The process terminated by a normal exit and the value is the process
+        ending status.
+
+      o < 0 and > -256
+
+        The process was terminated by a signal and the value is the negation of
+        the signal number.
+
+      o -256
+
+        The process timed out.
+
+      o -257
+
+        The was some other error in wait(); errno is still set.
+
+pid_t child_open_exim(int *fd)
+
+    This function provide you with a means of submitting a new message to Exim.
+    (Of course, you can also call /usr/sbin/sendmail yourself if you want, but
+    this packages it all up for you.) The function creates a pipe, forks a
+    subprocess that is running
+
+    exim -t -oem -oi -f <>
+
+    and returns to you (via the "int *" argument) a file descriptor for the
+    pipe that is connected to the standard input. The yield of the function is
+    the PID of the subprocess. You can then write a message to the file
+    descriptor, with recipients in To:, Cc:, and/or Bcc: header lines.
+
+    When you have finished, call child_close() to wait for the process to
+    finish and to collect its ending status. A timeout value of zero is usually
+    fine in this circumstance. Unless you have made a mistake with the
+    recipient addresses, you should get a return code of zero.
+
+pid_t child_open_exim2(int *fd, uschar *sender, uschar *sender_authentication)
+
+    This function is a more sophisticated version of child_open(). The command
+    that it runs is:
+
+    exim -t -oem -oi -f sender -oMas sender_authentication
+
+    The third argument may be NULL, in which case the -oMas option is omitted.
+
+void debug_printf(char *, ...)
+
+    This is Exim's debugging function, with arguments as for (printf(). The
+    output is written to the standard error stream. If no debugging is
+    selected, calls to debug_printf() have no effect. Normally, you should make
+    calls conditional on the "local_scan" debug selector by coding like this:
+
+    if ((debug_selector & D_local_scan) != 0)
+      debug_printf("xxx", ...);
+
+uschar *expand_string(uschar *string)
+
+    This is an interface to Exim's string expansion code. The return value is
+    the expanded string, or NULL if there was an expansion failure. The C
+    variable expand_string_message contains an error message after an expansion
+    failure. If expansion does not change the string, the return value is the
+    pointer to the input string. Otherwise, the return value points to a new
+    block of memory that was obtained by a call to store_get(). See section
+    46.8 below for a discussion of memory handling.
+
+void header_add(int type, char *format, ...)
+
+    This function allows you to an add additional header line at the end of the
+    existing ones. The first argument is the type, and should normally be a
+    space character. The second argument is a format string and any number of
+    substitution arguments as for sprintf(). You may include internal newlines
+    if you want, and you must ensure that the string ends with a newline.
+
+void header_add_at_position
+(BOOL after, uschar *name, BOOL topnot, int type, char *format,   ...)
+
+    This function adds a new header line at a specified point in the header
+    chain. The header itself is specified as for header_add().
+
+    If name is NULL, the new header is added at the end of the chain if after
+    is true, or at the start if after is false. If name is not NULL, the header
+    lines are searched for the first non-deleted header that matches the name.
+    If one is found, the new header is added before it if after is false. If 
+    after is true, the new header is added after the found header and any
+    adjacent subsequent ones with the same name (even if marked "deleted"). If
+    no matching non-deleted header is found, the topnot option controls where
+    the header is added. If it is true, addition is at the top; otherwise at
+    the bottom. Thus, to add a header after all the Received: headers, or at
+    the top if there are no Received: headers, you could use
+
+    header_add_at_position(TRUE, US"Received", TRUE,
+      ' ', "X-xxx: ...");
+
+    Normally, there is always at least one non-deleted Received: header, but
+    there may not be if received_header_text expands to an empty string.
+
+void header_remove(int occurrence, uschar *name)
+
+    This function removes header lines. If occurrence is zero or negative, all
+    occurrences of the header are removed. If occurrence is greater than zero,
+    that particular instance of the header is removed. If no header(s) can be
+    found that match the specification, the function does nothing.
+
+BOOL header_testname(header_line *hdr, uschar *name, int length, BOOL notdel)
+
+    This function tests whether the given header has the given name. It is not
+    just a string comparison, because white space is permitted between the name
+    and the colon. If the notdel argument is true, a false return is forced for
+    all "deleted" headers; otherwise they are not treated specially. For
+    example:
+
+    if (header_testname(h, US"X-Spam", 6, TRUE)) ...
+
+uschar *lss_b64encode(uschar *cleartext, int length)
+
+    This function base64-encodes a string, which is passed by address and
+    length. The text may contain bytes of any value, including zero. The result
+    is passed back in dynamic memory that is obtained by calling store_get().
+    It is zero-terminated.
+
+int lss_b64decode(uschar *codetext, uschar **cleartext)
+
+    This function decodes a base64-encoded string. Its arguments are a
+    zero-terminated base64-encoded string and the address of a variable that is
+    set to point to the result, which is in dynamic memory. The length of the
+    decoded string is the yield of the function. If the input is invalid base64
+    data, the yield is -1. A zero byte is added to the end of the output string
+    to make it easy to interpret as a C string (assuming it contains no zeros
+    of its own). The added zero byte is not included in the returned count.
+
+int lss_match_domain(uschar *domain, uschar *list)
+
+    This function checks for a match in a domain list. Domains are always
+    matched caselessly. The return value is one of the following:
+
+        "OK"    match succeeded
+        "FAIL"  match failed
+        "DEFER" match deferred
+
+    DEFER is usually caused by some kind of lookup defer, such as the inability
+    to contact a database.
+
+int lss_match_local_part(uschar *localpart, uschar *list, BOOL caseless)
+
+    This function checks for a match in a local part list. The third argument
+    controls case-sensitivity. The return values are as for lss_match_domain().
+
+int lss_match_address(uschar *address, uschar *list, BOOL caseless)
+
+    This function checks for a match in an address list. The third argument
+    controls the case-sensitivity of the local part match. The domain is always
+    matched caselessly. The return values are as for lss_match_domain().
+
+int lss_match_host(uschar *host_name, uschar *host_address, uschar *list)
+
+    This function checks for a match in a host list. The most common usage is
+    expected to be
+
+    lss_match_host(sender_host_name, sender_host_address, ...)
+
+    An empty address field matches an empty item in the host list. If the host
+    name is NULL, the name corresponding to $sender_host_address is
+    automatically looked up if a host name is required to match an item in the
+    list. The return values are as for lss_match_domain(), but in addition, 
+    lss_match_host() returns ERROR in the case when it had to look up a host
+    name, but the lookup failed.
+
+void log_write(unsigned int selector, int which, char *format, ...)
+
+    This function writes to Exim's log files. The first argument should be zero
+    (it is concerned with log_selector). The second argument can be "LOG_MAIN"
+    or "LOG_REJECT" or "LOG_PANIC" or the inclusive "or" of any combination of
+    them. It specifies to which log or logs the message is written. The
+    remaining arguments are a format and relevant insertion arguments. The
+    string should not contain any newlines, not even at the end.
+
+void receive_add_recipient(uschar *address, int pno)
+
+    This function adds an additional recipient to the message. The first
+    argument is the recipient address. If it is unqualified (has no domain), it
+    is qualified with the qualify_recipient domain. The second argument must
+    always be -1.
+
+    This function does not allow you to specify a private errors_to address (as
+    described with the structure of recipient_item above), because it pre-dates
+    the addition of that field to the structure. However, it is easy to add
+    such a value afterwards. For example:
+
+     receive_add_recipient(US"monitor@mydom.example", -1);
+     recipients_list[recipients_count-1].errors_to =
+       US"postmaster@mydom.example";
+
+BOOL receive_remove_recipient(uschar *recipient)
+
+    This is a convenience function to remove a named recipient from the list of
+    recipients. It returns true if a recipient was removed, and false if no
+    matching recipient could be found. The argument must be a complete email
+    address.
+
+uschar rfc2047_decode
+(uschar *string, BOOL lencheck, uschar *target, int zeroval, int *lenptr,
+  uschar **error)
+
+    This function decodes strings that are encoded according to RFC 2047.
+    Typically these are the contents of header lines. First, each "encoded
+    word" is decoded from the Q or B encoding into a byte-string. Then, if
+    provided with the name of a charset encoding, and if the iconv() function
+    is available, an attempt is made to translate the result to the named
+    character set. If this fails, the binary string is returned with an error
+    message.
+
+    The first argument is the string to be decoded. If lencheck is TRUE, the
+    maximum MIME word length is enforced. The third argument is the target
+    encoding, or NULL if no translation is wanted.
+
+    If a binary zero is encountered in the decoded string, it is replaced by
+    the contents of the zeroval argument. For use with Exim headers, the value
+    must not be 0 because header lines are handled as zero-terminated strings.
+
+    The function returns the result of processing the string, zero-terminated;
+    if lenptr is not NULL, the length of the result is set in the variable to
+    which it points. When zeroval is 0, lenptr should not be NULL.
+
+    If an error is encountered, the function returns NULL and uses the error
+    argument to return an error message. The variable pointed to by error is
+    set to NULL if there is no error; it may be set non-NULL even when the
+    function returns a non-NULL value if decoding was successful, but there was
+    a problem with translation.
+
+int smtp_fflush(void)
+
+    This function is used in conjunction with smtp_printf(), as described
+    below.
+
+void smtp_printf(char *,BOOL, ...)
+
+    The arguments of this function are almost like printf(); it writes to the
+    SMTP output stream. You should use this function only when there is an SMTP
+    output stream, that is, when the incoming message is being received via
+    interactive SMTP. This is the case when smtp_input is TRUE and 
+    smtp_batched_input is FALSE. If you want to test for an incoming message
+    from another host (as opposed to a local process that used the -bs command
+    line option), you can test the value of sender_host_address, which is
+    non-NULL when a remote host is involved.
+
+    If an SMTP TLS connection is established, smtp_printf() uses the TLS output
+    function, so it can be used for all forms of SMTP connection.
+
+    The second argument is used to request that the data be buffered (when
+    TRUE) or flushed (along with any previously buffered, when FALSE). This is
+    advisory only, but likely to save on system-calls and packets sent when a
+    sequence of calls to the function are made.
+
+    The argument was added in Exim version 4.90 - changing the API/ABI. Nobody
+    noticed until 4.93 was imminent, at which point the ABI version number was
+    incremented.
+
+    Strings that are written by smtp_printf() from within local_scan() must
+    start with an appropriate response code: 550 if you are going to return
+    LOCAL_SCAN_REJECT, 451 if you are going to return LOCAL_SCAN_TEMPREJECT,
+    and 250 otherwise. Because you are writing the initial lines of a
+    multi-line response, the code must be followed by a hyphen to indicate that
+    the line is not the final response line. You must also ensure that the
+    lines you write terminate with CRLF. For example:
+
+    smtp_printf("550-this is some extra info\r\n");
+    return LOCAL_SCAN_REJECT;
+
+    Note that you can also create multi-line responses by including newlines in
+    the data returned via the return_text argument. The added value of using 
+    smtp_printf() is that, for instance, you could introduce delays between
+    multiple output lines.
+
+    The smtp_printf() function does not return any error indication, because it
+    does not guarantee a flush of pending output, and therefore does not test
+    the state of the stream. (In the main code of Exim, flushing and error
+    detection is done when Exim is ready for the next SMTP input command.) If
+    you want to flush the output and check for an error (for example, the
+    dropping of a TCP/IP connection), you can call smtp_fflush(), which has no
+    arguments. It flushes the output stream, and returns a non-zero value if
+    there is an error.
+
+void *store_get(int,BOOL)
+
+    This function accesses Exim's internal store (memory) manager. It gets a
+    new chunk of memory whose size is given by the first argument. The second
+    argument should be given as TRUE if the memory will be used for data
+    possibly coming from an attacker (eg. the message content), FALSE if it is
+    locally-sourced. Exim bombs out if it ever runs out of memory. See the next
+    section for a discussion of memory handling.
+
+void *store_get_perm(int,BOOL)
+
+    This function is like store_get(), but it always gets memory from the
+    permanent pool. See the next section for a discussion of memory handling.
+
+uschar *string_copy(uschar *string)
+
+    See below.
+
+uschar *string_copyn(uschar *string, int length)
+
+    See below.
+
+uschar *string_sprintf(char *format, ...)
+
+    These three functions create strings using Exim's dynamic memory
+    facilities. The first makes a copy of an entire string. The second copies
+    up to a maximum number of characters, indicated by the second argument. The
+    third uses a format and insertion arguments to create a new string. In each
+    case, the result is a pointer to a new string in the current memory pool.
+    See the next section for more discussion.
+
+
+46.8 More about Exim's memory handling
+--------------------------------------
+
+No function is provided for freeing memory, because that is never needed. The
+dynamic memory that Exim uses when receiving a message is automatically
+recycled if another message is received by the same process (this applies only
+to incoming SMTP connections - other input methods can supply only one message
+at a time). After receiving the last message, a reception process terminates.
+
+Because it is recycled, the normal dynamic memory cannot be used for holding
+data that must be preserved over a number of incoming messages on the same SMTP
+connection. However, Exim in fact uses two pools of dynamic memory; the second
+one is not recycled, and can be used for this purpose.
+
+If you want to allocate memory that remains available for subsequent messages
+in the same SMTP connection, you should set
+
+store_pool = POOL_PERM
+
+before calling the function that does the allocation. There is no need to
+restore the value if you do not need to; however, if you do want to revert to
+the normal pool, you can either restore the previous value of store_pool or set
+it explicitly to POOL_MAIN.
+
+The pool setting applies to all functions that get dynamic memory, including 
+expand_string(), store_get(), and the string_xxx() functions. There is also a
+convenience function called store_get_perm() that gets a block of memory from
+the permanent pool while preserving the value of store_pool.
+
+
+
+===============================================================================
+47. SYSTEM-WIDE MESSAGE FILTERING
+
+The previous chapters (on ACLs and the local scan function) describe checks
+that can be applied to messages before they are accepted by a host. There is
+also a mechanism for checking messages once they have been received, but before
+they are delivered. This is called the system filter.
+
+The system filter operates in a similar manner to users' filter files, but it
+is run just once per message (however many recipients the message has). It
+should not normally be used as a substitute for routing, because deliver
+commands in a system router provide new envelope recipient addresses. The
+system filter must be an Exim filter. It cannot be a Sieve filter.
+
+The system filter is run at the start of a delivery attempt, before any routing
+is done. If a message fails to be completely delivered at the first attempt,
+the system filter is run again at the start of every retry. If you want your
+filter to do something only once per message, you can make use of the 
+first_delivery condition in an if command in the filter to prevent it happening
+on retries.
+
+Warning: Because the system filter runs just once, variables that are specific
+to individual recipient addresses, such as $local_part and $domain, are not
+set, and the "personal" condition is not meaningful. If you want to run a
+centrally-specified filter for each recipient address independently, you can do
+so by setting up a suitable redirect router, as described in section 47.8
+below.
+
+
+47.1 Specifying a system filter
+-------------------------------
+
+The name of the file that contains the system filter must be specified by
+setting system_filter. If you want the filter to run under a uid and gid other
+than root, you must also set system_filter_user and system_filter_group as
+appropriate. For example:
+
+system_filter = /etc/mail/exim.filter
+system_filter_user = exim
+
+If a system filter generates any deliveries directly to files or pipes (via the
+save or pipe commands), transports to handle these deliveries must be specified
+by setting system_filter_file_transport and system_filter_pipe_transport,
+respectively. Similarly, system_filter_reply_transport must be set to handle
+any messages generated by the reply command.
+
+
+47.2 Testing a system filter
+----------------------------
+
+You can run simple tests of a system filter in the same way as for a user
+filter, but you should use -bF rather than -bf, so that features that are
+permitted only in system filters are recognized.
+
+If you want to test the combined effect of a system filter and a user filter,
+you can use both -bF and -bf on the same command line.
+
+
+47.3 Contents of a system filter
+--------------------------------
+
+The language used to specify system filters is the same as for users' filter
+files. It is described in the separate end-user document Exim's interface to
+mail filtering. However, there are some additional features that are available
+only in system filters; these are described in subsequent sections. If they are
+encountered in a user's filter file or when testing with -bf, they cause
+errors.
+
+There are two special conditions which, though available in users' filter
+files, are designed for use in system filters. The condition first_delivery is
+true only for the first attempt at delivering a message, and manually_thawed is
+true only if the message has been frozen, and subsequently thawed by an admin
+user. An explicit forced delivery counts as a manual thaw, but thawing as a
+result of the auto_thaw setting does not.
+
+Warning: If a system filter uses the first_delivery condition to specify an
+"unseen" (non-significant) delivery, and that delivery does not succeed, it
+will not be tried again. If you want Exim to retry an unseen delivery until it
+succeeds, you should arrange to set it up every time the filter runs.
+
+When a system filter finishes running, the values of the variables $n0 - $n9
+are copied into $sn0 - $sn9 and are thereby made available to users' filter
+files. Thus a system filter can, for example, set up "scores" to which users'
+filter files can refer.
+
+
+47.4 Additional variable for system filters
+-------------------------------------------
+
+The expansion variable $recipients, containing a list of all the recipients of
+the message (separated by commas and white space), is available in system
+filters. It is not available in users' filters for privacy reasons.
+
+
+47.5 Defer, freeze, and fail commands for system filters
+--------------------------------------------------------
+
+There are three extra commands (defer, freeze and fail) which are always
+available in system filters, but are not normally enabled in users' filters.
+(See the allow_defer, allow_freeze and allow_fail options for the redirect
+router.) These commands can optionally be followed by the word text and a
+string containing an error message, for example:
+
+fail text "this message looks like spam to me"
+
+The keyword text is optional if the next character is a double quote.
+
+The defer command defers delivery of the original recipients of the message.
+The fail command causes all the original recipients to be failed, and a bounce
+message to be created. The freeze command suspends all delivery attempts for
+the original recipients. In all cases, any new deliveries that are specified by
+the filter are attempted as normal after the filter has run.
+
+The freeze command is ignored if the message has been manually unfrozen and not
+manually frozen since. This means that automatic freezing by a system filter
+can be used as a way of checking out suspicious messages. If a message is found
+to be all right, manually unfreezing it allows it to be delivered.
+
+The text given with a fail command is used as part of the bounce message as
+well as being written to the log. If the message is quite long, this can fill
+up a lot of log space when such failures are common. To reduce the size of the
+log message, Exim interprets the text in a special way if it starts with the
+two characters "<<" and contains ">>" later. The text between these two strings
+is written to the log, and the rest of the text is used in the bounce message.
+For example:
+
+fail "<<filter test 1>>Your message is rejected \
+     because it contains attachments that we are \
+     not prepared to receive."
+
+Take great care with the fail command when basing the decision to fail on the
+contents of the message, because the bounce message will of course include the
+contents of the original message and will therefore trigger the fail command
+again (causing a mail loop) unless steps are taken to prevent this. Testing the
+error_message condition is one way to prevent this. You could use, for example
+
+if $message_body contains "this is spam" and not error_message
+then fail text "spam is not wanted here" endif
+
+though of course that might let through unwanted bounce messages. The
+alternative is clever checking of the body and/or headers to detect bounces
+generated by the filter.
+
+The interpretation of a system filter file ceases after a defer, freeze, or 
+fail command is obeyed. However, any deliveries that were set up earlier in the
+filter file are honoured, so you can use a sequence such as
+
+mail ...
+freeze
+
+to send a specified message when the system filter is freezing (or deferring or
+failing) a message. The normal deliveries for the message do not, of course,
+take place.
+
+
+47.6 Adding and removing headers in a system filter
+---------------------------------------------------
+
+Two filter commands that are available only in system filters are:
+
+headers add <string>
+headers remove <string>
+
+The argument for the headers add is a string that is expanded and then added to
+the end of the message's headers. It is the responsibility of the filter
+maintainer to make sure it conforms to RFC 2822 syntax. Leading white space is
+ignored, and if the string is otherwise empty, or if the expansion is forced to
+fail, the command has no effect.
+
+You can use "\n" within the string, followed by white space, to specify
+continued header lines. More than one header may be added in one command by
+including "\n" within the string without any following white space. For
+example:
+
+headers add "X-header-1: ....\n  \
+             continuation of X-header-1 ...\n\
+             X-header-2: ...."
+
+Note that the header line continuation white space after the first newline must
+be placed before the backslash that continues the input string, because white
+space after input continuations is ignored.
+
+The argument for headers remove is a colon-separated list of header names. This
+command applies only to those headers that are stored with the message; those
+that are added at delivery time (such as Envelope-To: and Return-Path:) cannot
+be removed by this means. If there is more than one header with the same name,
+they are all removed.
+
+The headers command in a system filter makes an immediate change to the set of
+header lines that was received with the message (with possible additions from
+ACL processing). Subsequent commands in the system filter operate on the
+modified set, which also forms the basis for subsequent message delivery.
+Unless further modified during routing or transporting, this set of headers is
+used for all recipients of the message.
+
+During routing and transporting, the variables that refer to the contents of
+header lines refer only to those lines that are in this set. Thus, header lines
+that are added by a system filter are visible to users' filter files and to all
+routers and transports. This contrasts with the manipulation of header lines by
+routers and transports, which is not immediate, but which instead is saved up
+until the message is actually being written (see section 48.17).
+
+If the message is not delivered at the first attempt, header lines that were
+added by the system filter are stored with the message, and so are still
+present at the next delivery attempt. Header lines that were removed are still
+present, but marked "deleted" so that they are not transported with the
+message. For this reason, it is usual to make the headers command conditional
+on first_delivery so that the set of header lines is not modified more than
+once.
+
+Because header modification in a system filter acts immediately, you have to
+use an indirect approach if you want to modify the contents of a header line.
+For example:
+
+headers add "Old-Subject: $h_subject:"
+headers remove "Subject"
+headers add "Subject: new subject (was: $h_old-subject:)"
+headers remove "Old-Subject"
+
+
+47.7 Setting an errors address in a system filter
+-------------------------------------------------
+
+In a system filter, if a deliver command is followed by
+
+errors_to <some address>
+
+in order to change the envelope sender (and hence the error reporting) for that
+delivery, any address may be specified. (In a user filter, only the current
+user's address can be set.) For example, if some mail is being monitored, you
+might use
+
+unseen deliver monitor@spying.example errors_to root@local.example
+
+to take a copy which would not be sent back to the normal error reporting
+address if its delivery failed.
+
+
+47.8 Per-address filtering
+--------------------------
+
+In contrast to the system filter, which is run just once per message for each
+delivery attempt, it is also possible to set up a system-wide filtering
+operation that runs once for each recipient address. In this case, variables
+such as $local_part_data and $domain_data can be used, and indeed, the choice
+of filter file could be made dependent on them. This is an example of a router
+which implements such a filter:
+
+central_filter:
+  check_local_user
+  driver = redirect
+  domains = +local_domains
+  file = /central/filters/$local_part_data
+  no_verify
+  allow_filter
+  allow_freeze
+
+The filter is run in a separate process under its own uid. Therefore, either 
+check_local_user must be set (as above), in which case the filter is run as the
+local user, or the user option must be used to specify which user to use. If
+both are set, user overrides.
+
+Care should be taken to ensure that none of the commands in the filter file
+specify a significant delivery if the message is to go on to be delivered to
+its intended recipient. The router will not then claim to have dealt with the
+address, so it will be passed on to subsequent routers to be delivered in the
+normal way.
+
+
+
+===============================================================================
+48. MESSAGE PROCESSING
+
+Exim performs various transformations on the sender and recipient addresses of
+all messages that it handles, and also on the messages' header lines. Some of
+these are optional and configurable, while others always take place. All of
+this processing, except rewriting as a result of routing, and the addition or
+removal of header lines while delivering, happens when a message is received,
+before it is placed on Exim's queue.
+
+Some of the automatic processing takes place by default only for
+"locally-originated" messages. This adjective is used to describe messages that
+are not received over TCP/IP, but instead are passed to an Exim process on its
+standard input. This includes the interactive "local SMTP" case that is set up
+by the -bs command line option.
+
+Note: Messages received over TCP/IP on the loopback interface (127.0.0.1 or
+::1) are not considered to be locally-originated. Exim does not treat the
+loopback interface specially in any way.
+
+If you want the loopback interface to be treated specially, you must ensure
+that there are appropriate entries in your ACLs.
+
+
+48.1 Submission mode for non-local messages
+-------------------------------------------
+
+Processing that happens automatically for locally-originated messages (unless 
+suppress_local_fixups is set) can also be requested for messages that are
+received over TCP/IP. The term "submission mode" is used to describe this
+state. Submission mode is set by the modifier
+
+control = submission
+
+in a MAIL, RCPT, or pre-data ACL for an incoming message (see sections 44.21
+and 44.22). This makes Exim treat the message as a local submission, and is
+normally used when the source of the message is known to be an MUA running on a
+client host (as opposed to an MTA). For example, to set submission mode for
+messages originating on the IPv4 loopback interface, you could include the
+following in the MAIL ACL:
+
+warn  hosts = 127.0.0.1
+      control = submission
+
+There are some options that can be used when setting submission mode. A slash
+is used to separate options. For example:
+
+control = submission/sender_retain
+
+Specifying sender_retain has the effect of setting local_sender_retain true and
+local_from_check false for the current incoming message. The first of these
+allows an existing Sender: header in the message to remain, and the second
+suppresses the check to ensure that From: matches the authenticated sender.
+With this setting, Exim still fixes up messages by adding Date: and Message-ID:
+header lines if they are missing, but makes no attempt to check sender
+authenticity in header lines.
+
+When sender_retain is not set, a submission mode setting may specify a domain
+to be used when generating a From: or Sender: header line. For example:
+
+control = submission/domain=some.domain
+
+The domain may be empty. How this value is used is described in sections 48.11
+and 48.16. There is also a name option that allows you to specify the user's
+full name for inclusion in a created Sender: or From: header line. For example:
+
+accept authenticated = *
+       control = submission/domain=wonderland.example/\
+                            name=${lookup {$authenticated_id} \
+                                   lsearch {/etc/exim/namelist}}
+
+Because the name may contain any characters, including slashes, the name option
+must be given last. The remainder of the string is used as the name. For the
+example above, if /etc/exim/namelist contains:
+
+bigegg:  Humpty Dumpty
+
+then when the sender has authenticated as bigegg, the generated Sender: line
+would be:
+
+Sender: Humpty Dumpty <bigegg@wonderland.example>
+
+By default, submission mode forces the return path to the same address as is
+used to create the Sender: header. However, if sender_retain is specified, the
+return path is also left unchanged.
+
+Note: The changes caused by submission mode take effect after the predata ACL.
+This means that any sender checks performed before the fix-ups use the
+untrusted sender address specified by the user, not the trusted sender address
+specified by submission mode. Although this might be slightly unexpected, it
+does mean that you can configure ACL checks to spot that a user is trying to
+spoof another's address.
+
+
+48.2 Line endings
+-----------------
+
+RFC 2821 specifies that CRLF (two characters: carriage-return, followed by
+linefeed) is the line ending for messages transmitted over the Internet using
+SMTP over TCP/IP. However, within individual operating systems, different
+conventions are used. For example, Unix-like systems use just LF, but others
+use CRLF or just CR.
+
+Exim was designed for Unix-like systems, and internally, it stores messages
+using the system's convention of a single LF as a line terminator. When
+receiving a message, all line endings are translated to this standard format.
+Originally, it was thought that programs that passed messages directly to an
+MTA within an operating system would use that system's convention. Experience
+has shown that this is not the case; for example, there are Unix applications
+that use CRLF in this circumstance. For this reason, and for compatibility with
+other MTAs, the way Exim handles line endings for all messages is now as
+follows:
+
+  * LF not preceded by CR is treated as a line ending.
+
+  * CR is treated as a line ending; if it is immediately followed by LF, the LF
+    is ignored.
+
+  * The sequence "CR, dot, CR" does not terminate an incoming SMTP message, nor
+    a local message in the state where a line containing only a dot is a
+    terminator.
+
+  * If a bare CR is encountered within a header line, an extra space is added
+    after the line terminator so as not to end the header line. The reasoning
+    behind this is that bare CRs in header lines are most likely either to be
+    mistakes, or people trying to play silly games.
+
+  * If the first header line received in a message ends with CRLF, a subsequent
+    bare LF in a header line is treated in the same way as a bare CR in a
+    header line.
+
+
+48.3 Unqualified addresses
+--------------------------
+
+By default, Exim expects every envelope address it receives from an external
+host to be fully qualified. Unqualified addresses cause negative responses to
+SMTP commands. However, because SMTP is used as a means of transporting
+messages from MUAs running on personal workstations, there is sometimes a
+requirement to accept unqualified addresses from specific hosts or IP networks.
+
+Exim has two options that separately control which hosts may send unqualified
+sender or recipient addresses in SMTP commands, namely sender_unqualified_hosts
+and recipient_unqualified_hosts. In both cases, if an unqualified address is
+accepted, it is qualified by adding the value of qualify_domain or 
+qualify_recipient, as appropriate.
+
+Unqualified addresses in header lines are automatically qualified for messages
+that are locally originated, unless the -bnq option is given on the command
+line. For messages received over SMTP, unqualified addresses in header lines
+are qualified only if unqualified addresses are permitted in SMTP commands. In
+other words, such qualification is also controlled by sender_unqualified_hosts
+and recipient_unqualified_hosts,
+
+
+48.4 The UUCP From line
+-----------------------
+
+Messages that have come from UUCP (and some other applications) often begin
+with a line containing the envelope sender and a timestamp, following the word
+"From". Examples of two common formats are:
+
+From a.oakley@berlin.mus Fri Jan  5 12:35 GMT 1996
+From f.butler@berlin.mus Fri, 7 Jan 97 14:00:00 GMT
+
+This line precedes the RFC 2822 header lines. For compatibility with Sendmail,
+Exim recognizes such lines at the start of messages that are submitted to it
+via the command line (that is, on the standard input). It does not recognize
+such lines in incoming SMTP messages, unless the sending host matches 
+ignore_fromline_hosts or the -bs option was used for a local message and 
+ignore_fromline_local is set. The recognition is controlled by a regular
+expression that is defined by the uucp_from_pattern option, whose default value
+matches the two common cases shown above and puts the address that follows
+"From" into $1.
+
+When the caller of Exim for a non-SMTP message that contains a "From" line is a
+trusted user, the message's sender address is constructed by expanding the
+contents of uucp_sender_address, whose default value is "$1". This is then
+parsed as an RFC 2822 address. If there is no domain, the local part is
+qualified with qualify_domain unless it is the empty string. However, if the
+command line -f option is used, it overrides the "From" line.
+
+If the caller of Exim is not trusted, the "From" line is recognized, but the
+sender address is not changed. This is also the case for incoming SMTP messages
+that are permitted to contain "From" lines.
+
+Only one "From" line is recognized. If there is more than one, the second is
+treated as a data line that starts the body of the message, as it is not valid
+as a header line. This also happens if a "From" line is present in an incoming
+SMTP message from a source that is not permitted to send them.
+
+
+48.5 Resent- header lines
+-------------------------
+
+RFC 2822 makes provision for sets of header lines starting with the string
+"Resent-" to be added to a message when it is resent by the original recipient
+to somebody else. These headers are Resent-Date:, Resent-From:, Resent-Sender:,
+Resent-To:, Resent-Cc:, Resent-Bcc: and Resent-Message-ID:. The RFC says:
+
+    Resent fields are strictly informational. They MUST NOT be used in the
+    normal processing of replies or other such automatic actions on messages.
+
+This leaves things a bit vague as far as other processing actions such as
+address rewriting are concerned. Exim treats Resent- header lines as follows:
+
+  * A Resent-From: line that just contains the login id of the submitting user
+    is automatically rewritten in the same way as From: (see below).
+
+  * If there's a rewriting rule for a particular header line, it is also
+    applied to Resent- header lines of the same type. For example, a rule that
+    rewrites From: also rewrites Resent-From:.
+
+  * For local messages, if Sender: is removed on input, Resent-Sender: is also
+    removed.
+
+  * For a locally-submitted message, if there are any Resent- header lines but
+    no Resent-Date:, Resent-From:, or Resent-Message-Id:, they are added as
+    necessary. It is the contents of Resent-Message-Id: (rather than 
+    Message-Id:) which are included in log lines in this case.
+
+  * The logic for adding Sender: is duplicated for Resent-Sender: when any 
+    Resent- header lines are present.
+
+
+48.6 The Auto-Submitted: header line
+------------------------------------
+
+Whenever Exim generates an autoreply, a bounce, or a delay warning message, it
+includes the header line:
+
+Auto-Submitted: auto-replied
+
+
+48.7 The Bcc: header line
+-------------------------
+
+If Exim is called with the -t option, to take recipient addresses from a
+message's header, it removes any Bcc: header line that may exist (after
+extracting its addresses). If -t is not present on the command line, any
+existing Bcc: is not removed.
+
+
+48.8 The Date: header line
+--------------------------
+
+If a locally-generated or submission-mode message has no Date: header line,
+Exim adds one, using the current date and time, unless the 
+suppress_local_fixups control has been specified.
+
+
+48.9 The Delivery-date: header line
+-----------------------------------
+
+Delivery-date: header lines are not part of the standard RFC 2822 header set.
+Exim can be configured to add them to the final delivery of messages. (See the
+generic delivery_date_add transport option.) They should not be present in
+messages in transit. If the delivery_date_remove configuration option is set
+(the default), Exim removes Delivery-date: header lines from incoming messages.
+
+
+48.10 The Envelope-to: header line
+----------------------------------
+
+Envelope-to: header lines are not part of the standard RFC 2822 header set.
+Exim can be configured to add them to the final delivery of messages. (See the
+generic envelope_to_add transport option.) They should not be present in
+messages in transit. If the envelope_to_remove configuration option is set (the
+default), Exim removes Envelope-to: header lines from incoming messages.
+
+
+48.11 The From: header line
+---------------------------
+
+If a submission-mode message does not contain a From: header line, Exim adds
+one if either of the following conditions is true:
+
+  * The envelope sender address is not empty (that is, this is not a bounce
+    message). The added header line copies the envelope sender address.
+
+  * The SMTP session is authenticated and $authenticated_id is not empty.
+
+     1. If no domain is specified by the submission control, the local part is
+        $authenticated_id and the domain is $qualify_domain.
+
+     2. If a non-empty domain is specified by the submission control, the local
+        part is $authenticated_id, and the domain is the specified domain.
+
+     3. If an empty domain is specified by the submission control,
+        $authenticated_id is assumed to be the complete address.
+
+A non-empty envelope sender takes precedence.
+
+If a locally-generated incoming message does not contain a From: header line,
+and the suppress_local_fixups control is not set, Exim adds one containing the
+sender's address. The calling user's login name and full name are used to
+construct the address, as described in section 48.18. They are obtained from
+the password data by calling getpwuid() (but see the unknown_login
+configuration option). The address is qualified with qualify_domain.
+
+For compatibility with Sendmail, if an incoming, non-SMTP message has a From:
+header line containing just the unqualified login name of the calling user,
+this is replaced by an address containing the user's login name and full name
+as described in section 48.18.
+
+
+48.12 The Message-ID: header line
+---------------------------------
+
+If a locally-generated or submission-mode incoming message does not contain a 
+Message-ID: or Resent-Message-ID: header line, and the suppress_local_fixups
+control is not set, Exim adds a suitable header line to the message. If there
+are any Resent-: headers in the message, it creates Resent-Message-ID:. The id
+is constructed from Exim's internal message id, preceded by the letter E to
+ensure it starts with a letter, and followed by @ and the primary host name.
+Additional information can be included in this header line by setting the 
+message_id_header_text and/or message_id_header_domain options.
+
+
+48.13 The Received: header line
+-------------------------------
+
+A Received: header line is added at the start of every message. The contents
+are defined by the received_header_text configuration option, and Exim
+automatically adds a semicolon and a timestamp to the configured string.
+
+The Received: header is generated as soon as the message's header lines have
+been received. At this stage, the timestamp in the Received: header line is the
+time that the message started to be received. This is the value that is seen by
+the DATA ACL and by the local_scan() function.
+
+Once a message is accepted, the timestamp in the Received: header line is
+changed to the time of acceptance, which is (apart from a small delay while the
+-H spool file is written) the earliest time at which delivery could start.
+
+
+48.14 The References: header line
+---------------------------------
+
+Messages created by the autoreply transport include a References: header line.
+This is constructed according to the rules that are described in section 3.64
+of RFC 2822 (which states that replies should contain such a header line), and
+section 3.14 of RFC 3834 (which states that automatic responses are not
+different in this respect). However, because some mail processing software does
+not cope well with very long header lines, no more than 12 message IDs are
+copied from the References: header line in the incoming message. If there are
+more than 12, the first one and then the final 11 are copied, before adding the
+message ID of the incoming message.
+
+
+48.15 The Return-path: header line
+----------------------------------
+
+Return-path: header lines are defined as something an MTA may insert when it
+does the final delivery of messages. (See the generic return_path_add transport
+option.) Therefore, they should not be present in messages in transit. If the 
+return_path_remove configuration option is set (the default), Exim removes 
+Return-path: header lines from incoming messages.
+
+
+48.16 The Sender: header line
+-----------------------------
+
+For a locally-originated message from an untrusted user, Exim may remove an
+existing Sender: header line, and it may add a new one. You can modify these
+actions by setting the local_sender_retain option true, the local_from_check
+option false, or by using the suppress_local_fixups control setting.
+
+When a local message is received from an untrusted user and local_from_check is
+true (the default), and the suppress_local_fixups control has not been set, a
+check is made to see if the address given in the From: header line is the
+correct (local) sender of the message. The address that is expected has the
+login name as the local part and the value of qualify_domain as the domain.
+Prefixes and suffixes for the local part can be permitted by setting 
+local_from_prefix and local_from_suffix appropriately. If From: does not
+contain the correct sender, a Sender: line is added to the message.
+
+If you set local_from_check false, this checking does not occur. However, the
+removal of an existing Sender: line still happens, unless you also set 
+local_sender_retain to be true. It is not possible to set both of these options
+true at the same time.
+
+By default, no processing of Sender: header lines is done for messages received
+over TCP/IP or for messages submitted by trusted users. However, when a message
+is received over TCP/IP in submission mode, and sender_retain is not specified
+on the submission control, the following processing takes place:
+
+First, any existing Sender: lines are removed. Then, if the SMTP session is
+authenticated, and $authenticated_id is not empty, a sender address is created
+as follows:
+
+  * If no domain is specified by the submission control, the local part is
+    $authenticated_id and the domain is $qualify_domain.
+
+  * If a non-empty domain is specified by the submission control, the local
+    part is $authenticated_id, and the domain is the specified domain.
+
+  * If an empty domain is specified by the submission control,
+    $authenticated_id is assumed to be the complete address.
+
+This address is compared with the address in the From: header line. If they are
+different, a Sender: header line containing the created address is added.
+Prefixes and suffixes for the local part in From: can be permitted by setting 
+local_from_prefix and local_from_suffix appropriately.
+
+Note: Whenever a Sender: header line is created, the return path for the
+message (the envelope sender address) is changed to be the same address, except
+in the case of submission mode when sender_retain is specified.
+
+
+48.17 Adding and removing header lines in routers and transports
+----------------------------------------------------------------
+
+When a message is delivered, the addition and removal of header lines can be
+specified in a system filter, or on any of the routers and transports that
+process the message. Section 47.6 contains details about modifying headers in a
+system filter. Header lines can also be added in an ACL as a message is
+received (see section 44.24).
+
+In contrast to what happens in a system filter, header modifications that are
+specified on routers and transports apply only to the particular recipient
+addresses that are being processed by those routers and transports. These
+changes do not actually take place until a copy of the message is being
+transported. Therefore, they do not affect the basic set of header lines, and
+they do not affect the values of the variables that refer to header lines.
+
+Note: In particular, this means that any expansions in the configuration of the
+transport cannot refer to the modified header lines, because such expansions
+all occur before the message is actually transported.
+
+For both routers and transports, the argument of a headers_add option must be
+in the form of one or more RFC 2822 header lines, separated by newlines (coded
+as "\n"). For example:
+
+headers_add = X-added-header: added by $primary_hostname\n\
+              X-added-second: another added header line
+
+Exim does not check the syntax of these added header lines.
+
+Multiple headers_add options for a single router or transport can be specified;
+the values will append to a single list of header lines. Each header-line is
+separately expanded.
+
+The argument of a headers_remove option must consist of a colon-separated list
+of header names. This is confusing, because header names themselves are often
+terminated by colons. In this case, the colons are the list separators, not
+part of the names. For example:
+
+headers_remove = return-receipt-to:acknowledge-to
+
+Multiple headers_remove options for a single router or transport can be
+specified; the arguments will append to a single header-names list. Each item
+is separately expanded. Note that colons in complex expansions which are used
+to form all or part of a headers_remove list will act as list separators.
+
+When headers_add or headers_remove is specified on a router, items are expanded
+at routing time, and then associated with all addresses that are accepted by
+that router, and also with any new addresses that it generates. If an address
+passes through several routers as a result of aliasing or forwarding, the
+changes are cumulative.
+
+However, this does not apply to multiple routers that result from the use of
+the unseen option. Any header modifications that were specified by the "unseen"
+router or its predecessors apply only to the "unseen" delivery.
+
+Addresses that end up with different headers_add or headers_remove settings
+cannot be delivered together in a batch, so a transport is always dealing with
+a set of addresses that have the same header-processing requirements.
+
+The transport starts by writing the original set of header lines that arrived
+with the message, possibly modified by the system filter. As it writes out
+these lines, it consults the list of header names that were attached to the
+recipient address(es) by headers_remove options in routers, and it also
+consults the transport's own headers_remove option. Header lines whose names
+are on either of these lists are not written out. If there are multiple
+instances of any listed header, they are all skipped.
+
+After the remaining original header lines have been written, new header lines
+that were specified by routers' headers_add options are written, in the order
+in which they were attached to the address. These are followed by any header
+lines specified by the transport's headers_add option.
+
+This way of handling header line modifications in routers and transports has
+the following consequences:
+
+  * The original set of header lines, possibly modified by the system filter,
+    remains "visible", in the sense that the $header_xxx variables refer to it,
+    at all times.
+
+  * Header lines that are added by a router's headers_add option are not
+    accessible by means of the $header_xxx expansion syntax in subsequent
+    routers or the transport.
+
+  * Conversely, header lines that are specified for removal by headers_remove
+    in a router remain visible to subsequent routers and the transport.
+
+  * Headers added to an address by headers_add in a router cannot be removed by
+    a later router or by a transport.
+
+  * An added header can refer to the contents of an original header that is to
+    be removed, even it has the same name as the added header. For example:
+
+    headers_remove = subject
+    headers_add = Subject: new subject (was: $h_subject:)
+
+Warning: The headers_add and headers_remove options cannot be used for a 
+redirect router that has the one_time option set.
+
+
+48.18 Constructed addresses
+---------------------------
+
+When Exim constructs a sender address for a locally-generated message, it uses
+the form
+
+<user name>  <login@qualify_domain>
+
+For example:
+
+Zaphod Beeblebrox <zaphod@end.univ.example>
+
+The user name is obtained from the -F command line option if set, or otherwise
+by looking up the calling user by getpwuid() and extracting the "gecos" field
+from the password entry. If the "gecos" field contains an ampersand character,
+this is replaced by the login name with the first letter upper cased, as is
+conventional in a number of operating systems. See the gecos_name option for a
+way to tailor the handling of the "gecos" field. The unknown_username option
+can be used to specify user names in cases when there is no password file
+entry.
+
+In all cases, the user name is made to conform to RFC 2822 by quoting all or
+parts of it if necessary. In addition, if it contains any non-printing
+characters, it is encoded as described in RFC 2047, which defines a way of
+including non-ASCII characters in header lines. The value of the 
+headers_charset option specifies the name of the encoding that is used (the
+characters are assumed to be in this encoding). The setting of 
+print_topbitchars controls whether characters with the top bit set (that is,
+with codes greater than 127) count as printing characters or not.
+
+
+48.19 Case of local parts
+-------------------------
+
+RFC 2822 states that the case of letters in the local parts of addresses cannot
+be assumed to be non-significant. Exim preserves the case of local parts of
+addresses, but by default it uses a lower-cased form when it is routing,
+because on most Unix systems, usernames are in lower case and case-insensitive
+routing is required. However, any particular router can be made to use the
+original case for local parts by setting the caseful_local_part generic router
+option.
+
+If you must have mixed-case user names on your system, the best way to proceed,
+assuming you want case-independent handling of incoming email, is to set up
+your first router to convert incoming local parts in your domains to the
+correct case by means of a file lookup. For example:
+
+correct_case:
+  driver = redirect
+  domains = +local_domains
+  data = ${lookup{$local_part}cdb\
+              {/etc/usercased.cdb}{$value}fail}\
+              @$domain
+
+For this router, the local part is forced to lower case by the default action (
+caseful_local_part is not set). The lower-cased local part is used to look up a
+new local part in the correct case. If you then set caseful_local_part on any
+subsequent routers which process your domains, they will operate on local parts
+with the correct case in a case-sensitive manner.
+
+
+48.20 Dots in local parts
+-------------------------
+
+RFC 2822 forbids empty components in local parts. That is, an unquoted local
+part may not begin or end with a dot, nor have two consecutive dots in the
+middle. However, it seems that many MTAs do not enforce this, so Exim permits
+empty components for compatibility.
+
+
+48.21 Rewriting addresses
+-------------------------
+
+Rewriting of sender and recipient addresses, and addresses in headers, can
+happen automatically, or as the result of configuration options, as described
+in chapter 31. The headers that may be affected by this are Bcc:, Cc:, From:, 
+Reply-To:, Sender:, and To:.
+
+Automatic rewriting includes qualification, as mentioned above. The other case
+in which it can happen is when an incomplete non-local domain is given. The
+routing process may cause this to be expanded into the full domain name. For
+example, a header such as
+
+To: hare@teaparty
+
+might get rewritten as
+
+To: hare@teaparty.wonderland.fict.example
+
+Rewriting as a result of routing is the one kind of message processing that
+does not happen at input time, as it cannot be done until the address has been
+routed.
+
+Strictly, one should not do any deliveries of a message until all its addresses
+have been routed, in case any of the headers get changed as a result of
+routing. However, doing this in practice would hold up many deliveries for
+unreasonable amounts of time, just because one address could not immediately be
+routed. Exim therefore does not delay other deliveries when routing of one or
+more addresses is deferred.
+
+
+
+===============================================================================
+49. SMTP PROCESSING
+
+Exim supports a number of different ways of using the SMTP protocol, and its
+LMTP variant, which is an interactive protocol for transferring messages into a
+closed mail store application. This chapter contains details of how SMTP is
+processed. For incoming mail, the following are available:
+
+  * SMTP over TCP/IP (Exim daemon or inetd);
+
+  * SMTP over the standard input and output (the -bs option);
+
+  * Batched SMTP on the standard input (the -bS option).
+
+For mail delivery, the following are available:
+
+  * SMTP over TCP/IP (the smtp transport);
+
+  * LMTP over TCP/IP (the smtp transport with the protocol option set to
+    "lmtp");
+
+  * LMTP over a pipe to a process running in the local host (the lmtp
+    transport);
+
+  * Batched SMTP to a file or pipe (the appendfile and pipe transports with the
+    use_bsmtp option set).
+
+Batched SMTP is the name for a process in which batches of messages are stored
+in or read from files (or pipes), in a format in which SMTP commands are used
+to contain the envelope information.
+
+
+49.1 Outgoing SMTP and LMTP over TCP/IP
+---------------------------------------
+
+Outgoing SMTP and LMTP over TCP/IP is implemented by the smtp transport. The 
+protocol option selects which protocol is to be used, but the actual processing
+is the same in both cases.
+
+If, in response to its EHLO command, Exim is told that the SIZE extension is
+supported, it adds SIZE=<n> to each subsequent MAIL command. The value of <n>
+is the message size plus the value of the size_addition option (default 1024)
+to allow for additions to the message such as per-transport header lines, or
+changes made in a transport filter. If size_addition is set negative, the use
+of SIZE is suppressed.
+
+If the remote server advertises support for PIPELINING, Exim uses the
+pipelining extension to SMTP (RFC 2197) to reduce the number of TCP/IP packets
+required for the transaction.
+
+If the remote server advertises support for the STARTTLS command, and Exim was
+built to support TLS encryption, it tries to start a TLS session unless the
+server matches hosts_avoid_tls. See chapter 43 for more details. Either a match
+in that or hosts_verify_avoid_tls apply when the transport is called for
+verification.
+
+If the remote server advertises support for the AUTH command, Exim scans the
+authenticators configuration for any suitable client settings, as described in
+chapter 33.
+
+Responses from the remote host are supposed to be terminated by CR followed by
+LF. However, there are known to be hosts that do not send CR characters, so in
+order to be able to interwork with such hosts, Exim treats LF on its own as a
+line terminator.
+
+If a message contains a number of different addresses, all those with the same
+characteristics (for example, the same envelope sender) that resolve to the
+same set of hosts, in the same order, are sent in a single SMTP transaction,
+even if they are for different domains, unless there are more than the setting
+of the max_rcpts option in the smtp transport allows, in which case they are
+split into groups containing no more than max_rcpts addresses each. If 
+remote_max_parallel is greater than one, such groups may be sent in parallel
+sessions. The order of hosts with identical MX values is not significant when
+checking whether addresses can be batched in this way.
+
+When the smtp transport suffers a temporary failure that is not
+message-related, Exim updates its transport-specific database, which contains
+records indexed by host name that remember which messages are waiting for each
+particular host. It also updates the retry database with new retry times.
+
+Exim's retry hints are based on host name plus IP address, so if one address of
+a multi-homed host is broken, it will soon be skipped most of the time. See the
+next section for more detail about error handling.
+
+When a message is successfully delivered over a TCP/IP SMTP connection, Exim
+looks in the hints database for the transport to see if there are any queued
+messages waiting for the host to which it is connected. If it finds one, it
+creates a new Exim process using the -MC option (which can only be used by a
+process running as root or the Exim user) and passes the TCP/IP socket to it so
+that it can deliver another message using the same socket. The new process does
+only those deliveries that are routed to the connected host, and may in turn
+pass the socket on to a third process, and so on.
+
+The connection_max_messages option of the smtp transport can be used to limit
+the number of messages sent down a single TCP/IP connection.
+
+The second and subsequent messages delivered down an existing connection are
+identified in the main log by the addition of an asterisk after the closing
+square bracket of the IP address.
+
+
+49.2 Errors in outgoing SMTP
+----------------------------
+
+Three different kinds of error are recognized for outgoing SMTP: host errors,
+message errors, and recipient errors.
+
+Host errors
+
+    A host error is not associated with a particular message or with a
+    particular recipient of a message. The host errors are:
+
+      o Connection refused or timed out,
+
+      o Any error response code on connection,
+
+      o Any error response code to EHLO or HELO,
+
+      o Loss of connection at any time, except after ".",
+
+      o I/O errors at any time,
+
+      o Timeouts during the session, other than in response to MAIL, RCPT or
+        the "." at the end of the data.
+
+    For a host error, a permanent error response on connection, or in response
+    to EHLO, causes all addresses routed to the host to be failed. Any other
+    host error causes all addresses to be deferred, and retry data to be
+    created for the host. It is not tried again, for any message, until its
+    retry time arrives. If the current set of addresses are not all delivered
+    in this run (to some alternative host), the message is added to the list of
+    those waiting for this host, so if it is still undelivered when a
+    subsequent successful delivery is made to the host, it will be sent down
+    the same SMTP connection.
+
+Message errors
+
+    A message error is associated with a particular message when sent to a
+    particular host, but not with a particular recipient of the message. The
+    message errors are:
+
+      o Any error response code to MAIL, DATA, or the "." that terminates the
+        data,
+
+      o Timeout after MAIL,
+
+      o Timeout or loss of connection after the "." that terminates the data. A
+        timeout after the DATA command itself is treated as a host error, as is
+        loss of connection at any other time.
+
+    For a message error, a permanent error response (5xx) causes all addresses
+    to be failed, and a delivery error report to be returned to the sender. A
+    temporary error response (4xx), or one of the timeouts, causes all
+    addresses to be deferred. Retry data is not created for the host, but
+    instead, a retry record for the combination of host plus message id is
+    created. The message is not added to the list of those waiting for this
+    host. This ensures that the failing message will not be sent to this host
+    again until the retry time arrives. However, other messages that are routed
+    to the host are not affected, so if it is some property of the message that
+    is causing the error, it will not stop the delivery of other mail.
+
+    If the remote host specified support for the SIZE parameter in its response
+    to EHLO, Exim adds SIZE=nnn to the MAIL command, so an over-large message
+    will cause a message error because the error arrives as a response to MAIL.
+
+Recipient errors
+
+    A recipient error is associated with a particular recipient of a message.
+    The recipient errors are:
+
+      o Any error response to RCPT,
+
+      o Timeout after RCPT.
+
+    For a recipient error, a permanent error response (5xx) causes the
+    recipient address to be failed, and a bounce message to be returned to the
+    sender. A temporary error response (4xx) or a timeout causes the failing
+    address to be deferred, and routing retry data to be created for it. This
+    is used to delay processing of the address in subsequent queue runs, until
+    its routing retry time arrives. This applies to all messages, but because
+    it operates only in queue runs, one attempt will be made to deliver a new
+    message to the failing address before the delay starts to operate. This
+    ensures that, if the failure is really related to the message rather than
+    the recipient ("message too big for this recipient" is a possible example),
+    other messages have a chance of getting delivered. If a delivery to the
+    address does succeed, the retry information gets cleared, so all stuck
+    messages get tried again, and the retry clock is reset.
+
+    The message is not added to the list of those waiting for this host. Use of
+    the host for other messages is unaffected, and except in the case of a
+    timeout, other recipients are processed independently, and may be
+    successfully delivered in the current SMTP session. After a timeout it is
+    of course impossible to proceed with the session, so all addresses get
+    deferred. However, those other than the one that failed do not suffer any
+    subsequent retry delays. Therefore, if one recipient is causing trouble,
+    the others have a chance of getting through when a subsequent delivery
+    attempt occurs before the failing recipient's retry time.
+
+In all cases, if there are other hosts (or IP addresses) available for the
+current set of addresses (for example, from multiple MX records), they are
+tried in this run for any undelivered addresses, subject of course to their own
+retry data. In other words, recipient error retry data does not take effect
+until the next delivery attempt.
+
+Some hosts have been observed to give temporary error responses to every MAIL
+command at certain times ("insufficient space" has been seen). It would be nice
+if such circumstances could be recognized, and defer data for the host itself
+created, but this is not possible within the current Exim design. What actually
+happens is that retry data for every (host, message) combination is created.
+
+The reason that timeouts after MAIL and RCPT are treated specially is that
+these can sometimes arise as a result of the remote host's verification
+procedures. Exim makes this assumption, and treats them as if a temporary error
+response had been received. A timeout after "." is treated specially because it
+is known that some broken implementations fail to recognize the end of the
+message if the last character of the last line is a binary zero. Thus, it is
+helpful to treat this case as a message error.
+
+Timeouts at other times are treated as host errors, assuming a problem with the
+host, or the connection to it. If a timeout after MAIL, RCPT, or "." is really
+a connection problem, the assumption is that at the next try the timeout is
+likely to occur at some other point in the dialogue, causing it then to be
+treated as a host error.
+
+There is experimental evidence that some MTAs drop the connection after the
+terminating "." if they do not like the contents of the message for some
+reason, in contravention of the RFC, which indicates that a 5xx response should
+be given. That is why Exim treats this case as a message rather than a host
+error, in order not to delay other messages to the same host.
+
+
+49.3 Incoming SMTP messages over TCP/IP
+---------------------------------------
+
+Incoming SMTP messages can be accepted in one of two ways: by running a
+listening daemon, or by using inetd. In the latter case, the entry in /etc/
+inetd.conf should be like this:
+
+smtp stream tcp nowait exim /opt/exim/bin/exim in.exim -bs
+
+Exim distinguishes between this case and the case of a locally running user
+agent using the -bs option by checking whether or not the standard input is a
+socket. When it is, either the port must be privileged (less than 1024), or the
+caller must be root or the Exim user. If any other user passes a socket with an
+unprivileged port number, Exim prints a message on the standard error stream
+and exits with an error code.
+
+By default, Exim does not make a log entry when a remote host connects or
+disconnects (either via the daemon or inetd), unless the disconnection is
+unexpected. It can be made to write such log entries by setting the 
+smtp_connection log selector.
+
+Commands from the remote host are supposed to be terminated by CR followed by
+LF. However, there are known to be hosts that do not send CR characters. In
+order to be able to interwork with such hosts, Exim treats LF on its own as a
+line terminator. Furthermore, because common code is used for receiving
+messages from all sources, a CR on its own is also interpreted as a line
+terminator. However, the sequence "CR, dot, CR" does not terminate incoming
+SMTP data.
+
+One area that sometimes gives rise to problems concerns the EHLO or HELO
+commands. Some clients send syntactically invalid versions of these commands,
+which Exim rejects by default. (This is nothing to do with verifying the data
+that is sent, so helo_verify_hosts is not relevant.) You can tell Exim not to
+apply a syntax check by setting helo_accept_junk_hosts to match the broken
+hosts that send invalid commands.
+
+The amount of disk space available is checked whenever SIZE is received on a
+MAIL command, independently of whether message_size_limit or check_spool_space
+is configured, unless smtp_check_spool_space is set false. A temporary error is
+given if there is not enough space. If check_spool_space is set, the check is
+for that amount of space plus the value given with SIZE, that is, it checks
+that the addition of the incoming message will not reduce the space below the
+threshold.
+
+When a message is successfully received, Exim includes the local message id in
+its response to the final "." that terminates the data. If the remote host logs
+this text it can help with tracing what has happened to a message.
+
+The Exim daemon can limit the number of simultaneous incoming connections it is
+prepared to handle (see the smtp_accept_max option). It can also limit the
+number of simultaneous incoming connections from a single remote host (see the 
+smtp_accept_max_per_host option). Additional connection attempts are rejected
+using the SMTP temporary error code 421.
+
+The Exim daemon does not rely on the SIGCHLD signal to detect when a subprocess
+has finished, as this can get lost at busy times. Instead, it looks for
+completed subprocesses every time it wakes up. Provided there are other things
+happening (new incoming calls, starts of queue runs), completed processes will
+be noticed and tidied away. On very quiet systems you may sometimes see a
+"defunct" Exim process hanging about. This is not a problem; it will be noticed
+when the daemon next wakes up.
+
+When running as a daemon, Exim can reserve some SMTP slots for specific hosts,
+and can also be set up to reject SMTP calls from non-reserved hosts at times of
+high system load - for details see the smtp_accept_reserve, smtp_load_reserve,
+and smtp_reserve_hosts options. The load check applies in both the daemon and 
+inetd cases.
+
+Exim normally starts a delivery process for each message received, though this
+can be varied by means of the -odq command line option and the queue_only, 
+queue_only_file, and queue_only_load options. The number of simultaneously
+running delivery processes started in this way from SMTP input can be limited
+by the smtp_accept_queue and smtp_accept_queue_per_connection options. When
+either limit is reached, subsequently received messages are just put on the
+input queue without starting a delivery process.
+
+The controls that involve counts of incoming SMTP calls (smtp_accept_max, 
+smtp_accept_queue, smtp_accept_reserve) are not available when Exim is started
+up from the inetd daemon, because in that case each connection is handled by an
+entirely independent Exim process. Control by load average is, however,
+available with inetd.
+
+Exim can be configured to verify addresses in incoming SMTP commands as they
+are received. See chapter 44 for details. It can also be configured to rewrite
+addresses at this time - before any syntax checking is done. See section 31.9.
+
+Exim can also be configured to limit the rate at which a client host submits
+MAIL and RCPT commands in a single SMTP session. See the smtp_ratelimit_hosts
+option.
+
+
+49.4 Unrecognized SMTP commands
+-------------------------------
+
+If Exim receives more than smtp_max_unknown_commands unrecognized SMTP commands
+during a single SMTP connection, it drops the connection after sending the
+error response to the last command. The default value for 
+smtp_max_unknown_commands is 3. This is a defence against some kinds of abuse
+that subvert web servers into making connections to SMTP ports; in these
+circumstances, a number of non-SMTP lines are sent first.
+
+
+49.5 Syntax and protocol errors in SMTP commands
+------------------------------------------------
+
+A syntax error is detected if an SMTP command is recognized, but there is
+something syntactically wrong with its data, for example, a malformed email
+address in a RCPT command. Protocol errors include invalid command sequencing
+such as RCPT before MAIL. If Exim receives more than smtp_max_synprot_errors
+such commands during a single SMTP connection, it drops the connection after
+sending the error response to the last command. The default value for 
+smtp_max_synprot_errors is 3. This is a defence against broken clients that
+loop sending bad commands (yes, it has been seen).
+
+
+49.6 Use of non-mail SMTP commands
+----------------------------------
+
+The "non-mail" SMTP commands are those other than MAIL, RCPT, and DATA. Exim
+counts such commands, and drops the connection if there are too many of them in
+a single SMTP session. This action catches some denial-of-service attempts and
+things like repeated failing AUTHs, or a mad client looping sending EHLO. The
+global option smtp_accept_max_nonmail defines what "too many" means. Its
+default value is 10.
+
+When a new message is expected, one occurrence of RSET is not counted. This
+allows a client to send one RSET between messages (this is not necessary, but
+some clients do it). Exim also allows one uncounted occurrence of HELO or EHLO,
+and one occurrence of STARTTLS between messages. After starting up a TLS
+session, another EHLO is expected, and so it too is not counted.
+
+The first occurrence of AUTH in a connection, or immediately following STARTTLS
+is also not counted. Otherwise, all commands other than MAIL, RCPT, DATA, and
+QUIT are counted.
+
+You can control which hosts are subject to the limit set by 
+smtp_accept_max_nonmail by setting smtp_accept_max_nonmail_hosts. The default
+value is "*", which makes the limit apply to all hosts. This option means that
+you can exclude any specific badly-behaved hosts that you have to live with.
+
+
+49.7 The VRFY and EXPN commands
+-------------------------------
+
+When Exim receives a VRFY or EXPN command on a TCP/IP connection, it runs the
+ACL specified by acl_smtp_vrfy or acl_smtp_expn (as appropriate) in order to
+decide whether the command should be accepted or not.
+
+When no ACL is defined for VRFY, or if it rejects without setting an explicit
+response code, the command is accepted (with a 252 SMTP response code) in order
+to support awkward clients that do a VRFY before every RCPT. When VRFY is
+accepted, it runs exactly the same code as when Exim is called with the -bv
+option, and returns 250/451/550 SMTP response codes.
+
+If no ACL for EXPN is defined, the command is rejected. When EXPN is accepted,
+a single-level expansion of the address is done. EXPN is treated as an "address
+test" (similar to the -bt option) rather than a verification (the -bv option).
+If an unqualified local part is given as the argument to EXPN, it is qualified
+with qualify_domain. Rejections of VRFY and EXPN commands are logged on the
+main and reject logs, and VRFY verification failures are logged on the main log
+for consistency with RCPT failures.
+
+
+49.8 The ETRN command
+---------------------
+
+RFC 1985 describes an ESMTP command called ETRN that is designed to overcome
+the security problems of the TURN command (which has fallen into disuse). When
+Exim receives an ETRN command on a TCP/IP connection, it runs the ACL specified
+by acl_smtp_etrn in order to decide whether the command should be accepted or
+not. If no ACL is defined, the command is rejected.
+
+The ETRN command is concerned with "releasing" messages that are awaiting
+delivery to certain hosts. As Exim does not organize its message queue by host,
+the only form of ETRN that is supported by default is the one where the text
+starts with the "#" prefix, in which case the remainder of the text is specific
+to the SMTP server. A valid ETRN command causes a run of Exim with the -R
+option to happen, with the remainder of the ETRN text as its argument. For
+example,
+
+ETRN #brigadoon
+
+runs the command
+
+exim -R brigadoon
+
+which causes a delivery attempt on all messages with undelivered addresses
+containing the text "brigadoon". When smtp_etrn_serialize is set (the default),
+Exim prevents the simultaneous execution of more than one queue run for the
+same argument string as a result of an ETRN command. This stops a misbehaving
+client from starting more than one queue runner at once.
+
+Exim implements the serialization by means of a hints database in which a
+record is written whenever a process is started by ETRN, and deleted when the
+process completes. However, Exim does not keep the SMTP session waiting for the
+ETRN process to complete. Once ETRN is accepted, the client is sent a "success"
+return code. Obviously there is scope for hints records to get left lying
+around if there is a system or program crash. To guard against this, Exim
+ignores any records that are more than six hours old.
+
+For more control over what ETRN does, the smtp_etrn_command option can used.
+This specifies a command that is run whenever ETRN is received, whatever the
+form of its argument. For example:
+
+smtp_etrn_command = /etc/etrn_command $domain \
+                    $sender_host_address
+
+The string is split up into arguments which are independently expanded. The
+expansion variable $domain is set to the argument of the ETRN command, and no
+syntax checking is done on the contents of this argument. Exim does not wait
+for the command to complete, so its status code is not checked. Exim runs under
+its own uid and gid when receiving incoming SMTP, so it is not possible for it
+to change them before running the command.
+
+
+49.9 Incoming local SMTP
+------------------------
+
+Some user agents use SMTP to pass messages to their local MTA using the
+standard input and output, as opposed to passing the envelope on the command
+line and writing the message to the standard input. This is supported by the 
+-bs option. This form of SMTP is handled in the same way as incoming messages
+over TCP/IP (including the use of ACLs), except that the envelope sender given
+in a MAIL command is ignored unless the caller is trusted. In an ACL you can
+detect this form of SMTP input by testing for an empty host identification. It
+is common to have this as the first line in the ACL that runs for RCPT
+commands:
+
+accept hosts = :
+
+This accepts SMTP messages from local processes without doing any other tests.
+
+
+49.10 Outgoing batched SMTP
+---------------------------
+
+Both the appendfile and pipe transports can be used for handling batched SMTP.
+Each has an option called use_bsmtp which causes messages to be output in BSMTP
+format. No SMTP responses are possible for this form of delivery. All it is
+doing is using SMTP commands as a way of transmitting the envelope along with
+the message.
+
+The message is written to the file or pipe preceded by the SMTP commands MAIL
+and RCPT, and followed by a line containing a single dot. Lines in the message
+that start with a dot have an extra dot added. The SMTP command HELO is not
+normally used. If it is required, the message_prefix option can be used to
+specify it.
+
+Because appendfile and pipe are both local transports, they accept only one
+recipient address at a time by default. However, you can arrange for them to
+handle several addresses at once by setting the batch_max option. When this is
+done for BSMTP, messages may contain multiple RCPT commands. See chapter 25 for
+more details.
+
+When one or more addresses are routed to a BSMTP transport by a router that
+sets up a host list, the name of the first host on the list is available to the
+transport in the variable $host. Here is an example of such a transport and
+router:
+
+begin routers
+route_append:
+  driver = manualroute
+  transport = smtp_appendfile
+  route_list = domain.example  batch.host.example
+
+begin transports
+smtp_appendfile:
+  driver = appendfile
+  directory = /var/bsmtp/$host
+  batch_max = 1000
+  use_bsmtp
+  user = exim
+
+This causes messages addressed to domain.example to be written in BSMTP format
+to /var/bsmtp/batch.host.example, with only a single copy of each message
+(unless there are more than 1000 recipients).
+
+
+49.11 Incoming batched SMTP
+---------------------------
+
+The -bS command line option causes Exim to accept one or more messages by
+reading SMTP on the standard input, but to generate no responses. If the caller
+is trusted, the senders in the MAIL commands are believed; otherwise the sender
+is always the caller of Exim. Unqualified senders and receivers are not
+rejected (there seems little point) but instead just get qualified. HELO and
+EHLO act as RSET; VRFY, EXPN, ETRN and HELP, act as NOOP; QUIT quits.
+
+Minimal policy checking is done for BSMTP input. Only the non-SMTP ACL is run
+in the same way as for non-SMTP local input.
+
+If an error is detected while reading a message, including a missing "." at the
+end, Exim gives up immediately. It writes details of the error to the standard
+output in a stylized way that the calling program should be able to make some
+use of automatically, for example:
+
+554 Unexpected end of file
+Transaction started in line 10
+Error detected in line 14
+
+It writes a more verbose version, for human consumption, to the standard error
+file, for example:
+
+An error was detected while processing a file of BSMTP input.
+The error message was:
+
+501 '>' missing at end of address
+
+The SMTP transaction started in line 10.
+The error was detected in line 12.
+The SMTP command at fault was:
+
+rcpt to:<malformed@in.com.plete
+
+1 previous message was successfully processed.
+The rest of the batch was abandoned.
+
+The return code from Exim is zero only if there were no errors. It is 1 if some
+messages were accepted before an error was detected, and 2 if no messages were
+accepted.
+
+
+
+===============================================================================
+50. CUSTOMIZING BOUNCE AND WARNING MESSAGES
+
+When a message fails to be delivered, or remains in the queue for more than a
+configured amount of time, Exim sends a message to the original sender, or to
+an alternative configured address. The text of these messages is built into the
+code of Exim, but it is possible to change it, either by adding a single
+string, or by replacing each of the paragraphs by text supplied in a file.
+
+The From: and To: header lines are automatically generated; you can cause a 
+Reply-To: line to be added by setting the errors_reply_to option. Exim also
+adds the line
+
+Auto-Submitted: auto-generated
+
+to all warning and bounce messages,
+
+
+50.1 Customizing bounce messages
+--------------------------------
+
+If bounce_message_text is set, its contents are included in the default message
+immediately after "This message was created automatically by mail delivery
+software." The string is not expanded. It is not used if bounce_message_file is
+set.
+
+When bounce_message_file is set, it must point to a template file for
+constructing error messages. The file consists of a series of text items,
+separated by lines consisting of exactly four asterisks. If the file cannot be
+opened, default text is used and a message is written to the main and panic
+logs. If any text item in the file is empty, default text is used for that
+item.
+
+Each item of text that is read from the file is expanded, and there are two
+expansion variables which can be of use here: $bounce_recipient is set to the
+recipient of an error message while it is being created, and
+$bounce_return_size_limit contains the value of the return_size_limit option,
+rounded to a whole number.
+
+The items must appear in the file in the following order:
+
+  * The first item is included in the headers, and should include at least a 
+    Subject: header. Exim does not check the syntax of these headers.
+
+  * The second item forms the start of the error message. After it, Exim lists
+    the failing addresses with their error messages.
+
+  * The third item is used to introduce any text from pipe transports that is
+    to be returned to the sender. It is omitted if there is no such text.
+
+  * The fourth, fifth and sixth items will be ignored and may be empty. The
+    fields exist for back-compatibility
+
+The default state (bounce_message_file unset) is equivalent to the following
+file, in which the sixth item is empty. The Subject: and some other lines have
+been split in order to fit them on the page:
+
+Subject: Mail delivery failed
+  ${if eq{$sender_address}{$bounce_recipient}
+  {: returning message to sender}}
+****
+This message was created automatically by mail delivery software.
+
+A message ${if eq{$sender_address}{$bounce_recipient}
+  {that you sent }{sent by
+
+<$sender_address>
+
+}}could not be delivered to all of its recipients.
+This is a permanent error. The following address(es) failed:
+****
+The following text was generated during the delivery attempt(s):
+****
+------ This is a copy of the message, including all the headers.
+  ------
+****
+------ The body of the message is $message_size characters long;
+  only the first
+------ $bounce_return_size_limit or so are included here.
+****
+
+
+50.2 Customizing warning messages
+---------------------------------
+
+The option warn_message_file can be pointed at a template file for use when
+warnings about message delays are created. In this case there are only three
+text sections:
+
+  * The first item is included in the headers, and should include at least a 
+    Subject: header. Exim does not check the syntax of these headers.
+
+  * The second item forms the start of the warning message. After it, Exim
+    lists the delayed addresses.
+
+  * The third item then ends the message.
+
+The default state is equivalent to the following file, except that some lines
+have been split here, in order to fit them on the page:
+
+Subject: Warning: message $message_exim_id delayed
+  $warn_message_delay
+****
+This message was created automatically by mail delivery software.
+
+A message ${if eq{$sender_address}{$warn_message_recipients}
+{that you sent }{sent by
+
+<$sender_address>
+
+}}has not been delivered to all of its recipients after
+more than $warn_message_delay in the queue on $primary_hostname.
+
+The message identifier is:     $message_exim_id
+The subject of the message is: $h_subject
+The date of the message is:    $h_date
+
+The following address(es) have not yet been delivered:
+****
+No action is required on your part. Delivery attempts will
+continue for some time, and this warning may be repeated at
+intervals if the message remains undelivered. Eventually the
+mail delivery software will give up, and when that happens,
+the message will be returned to you.
+
+However, in the default state the subject and date lines are omitted if no
+appropriate headers exist. During the expansion of this file,
+$warn_message_delay is set to the delay time in one of the forms "<n> minutes"
+or "<n> hours", and $warn_message_recipients contains a list of recipients for
+the warning message. There may be more than one if there are multiple addresses
+with different errors_to settings on the routers that handled them.
+
+
+
+===============================================================================
+51. SOME COMMON CONFIGURATION SETTINGS
+
+This chapter discusses some configuration settings that seem to be fairly
+common. More examples and discussion can be found in the Exim book.
+
+
+51.1 Sending mail to a smart host
+---------------------------------
+
+If you want to send all mail for non-local domains to a "smart host", you
+should replace the default dnslookup router with a router which does the
+routing explicitly:
+
+send_to_smart_host:
+  driver = manualroute
+  route_list = !+local_domains smart.host.name
+  transport = remote_smtp
+
+You can use the smart host's IP address instead of the name if you wish. If you
+are using Exim only to submit messages to a smart host, and not for receiving
+incoming messages, you can arrange for it to do the submission synchronously by
+setting the mua_wrapper option (see chapter 52).
+
+
+51.2 Using Exim to handle mailing lists
+---------------------------------------
+
+Exim can be used to run simple mailing lists, but for large and/or complicated
+requirements, the use of additional specialized mailing list software such as
+Majordomo or Mailman is recommended.
+
+The redirect router can be used to handle mailing lists where each list is
+maintained in a separate file, which can therefore be managed by an independent
+manager. The domains router option can be used to run these lists in a separate
+domain from normal mail. For example:
+
+lists:
+  driver = redirect
+  domains = lists.example
+  file = ${lookup {$local_part} dsearch,ret=full {/usr/lists}}
+  forbid_pipe
+  forbid_file
+  errors_to = ${quote_local_part:$local_part-request}@lists.example
+  no_more
+
+This router is skipped for domains other than lists.example. For addresses in
+that domain, it looks for a file that matches the local part. If there is no
+such file, the router declines, but because no_more is set, no subsequent
+routers are tried, and so the whole delivery fails.
+
+The forbid_pipe and forbid_file options prevent a local part from being
+expanded into a filename or a pipe delivery, which is usually inappropriate in
+a mailing list.
+
+The errors_to option specifies that any delivery errors caused by addresses
+taken from a mailing list are to be sent to the given address rather than the
+original sender of the message. However, before acting on this, Exim verifies
+the error address, and ignores it if verification fails.
+
+For example, using the configuration above, mail sent to dicts@lists.example is
+passed on to those addresses contained in /usr/lists/dicts, with error reports
+directed to dicts-request@lists.example, provided that this address can be
+verified. There could be a file called /usr/lists/dicts-request containing the
+address(es) of this particular list's manager(s), but other approaches, such as
+setting up an earlier router (possibly using the local_part_prefix or 
+local_part_suffix options) to handle addresses of the form owner-xxx or xxx-
+request, are also possible.
+
+
+51.3 Syntax errors in mailing lists
+-----------------------------------
+
+If an entry in redirection data contains a syntax error, Exim normally defers
+delivery of the original address. That means that a syntax error in a mailing
+list holds up all deliveries to the list. This may not be appropriate when a
+list is being maintained automatically from data supplied by users, and the
+addresses are not rigorously checked.
+
+If the skip_syntax_errors option is set, the redirect router just skips entries
+that fail to parse, noting the incident in the log. If in addition 
+syntax_errors_to is set to a verifiable address, a message is sent to it
+whenever a broken address is skipped. It is usually appropriate to set 
+syntax_errors_to to the same address as errors_to.
+
+
+51.4 Re-expansion of mailing lists
+----------------------------------
+
+Exim remembers every individual address to which a message has been delivered,
+in order to avoid duplication, but it normally stores only the original
+recipient addresses with a message. If all the deliveries to a mailing list
+cannot be done at the first attempt, the mailing list is re-expanded when the
+delivery is next tried. This means that alterations to the list are taken into
+account at each delivery attempt, so addresses that have been added to the list
+since the message arrived will therefore receive a copy of the message, even
+though it pre-dates their subscription.
+
+If this behaviour is felt to be undesirable, the one_time option can be set on
+the redirect router. If this is done, any addresses generated by the router
+that fail to deliver at the first attempt are added to the message as "top
+level" addresses, and the parent address that generated them is marked
+"delivered". Thus, expansion of the mailing list does not happen again at the
+subsequent delivery attempts. The disadvantage of this is that if any of the
+failing addresses are incorrect, correcting them in the file has no effect on
+pre-existing messages.
+
+The original top-level address is remembered with each of the generated
+addresses, and is output in any log messages. However, any intermediate parent
+addresses are not recorded. This makes a difference to the log only if the 
+all_parents selector is set, but for mailing lists there is normally only one
+level of expansion anyway.
+
+
+51.5 Closed mailing lists
+-------------------------
+
+The examples so far have assumed open mailing lists, to which anybody may send
+mail. It is also possible to set up closed lists, where mail is accepted from
+specified senders only. This is done by making use of the generic senders
+option to restrict the router that handles the list.
+
+The following example uses the same file as a list of recipients and as a list
+of permitted senders. It requires three routers:
+
+lists_request:
+  driver = redirect
+  domains = lists.example
+  local_part_suffix = -request
+  local_parts = ${lookup {$local_part} dsearch,filter=file {/usr/lists}}
+  file = /usr/lists/${local_part_data}-request
+  no_more
+
+lists_post:
+  driver = redirect
+  domains = lists.example
+  local_parts = ${lookup {$local_part} dsearch,filter=file,ret=full {/usr/lists}}
+  senders = ${if exists {$local_part_data} {lsearch;$local_part_data}{*}}
+  file = ${lookup {$local_part} dsearch,ret=full {/usr/lists}}
+  forbid_pipe
+  forbid_file
+  errors_to = ${quote_local_part:$local_part-request}@lists.example
+  no_more
+
+lists_closed:
+  driver = redirect
+  domains = lists.example
+  allow_fail
+  data = :fail: $local_part@lists.example is a closed mailing list
+
+All three routers have the same domains setting, so for any other domains, they
+are all skipped. The first router runs only if the local part ends in -request.
+It handles messages to the list manager(s) by means of an open mailing list.
+
+The second router runs only if the senders precondition is satisfied. It checks
+for the existence of a list that corresponds to the local part, and then checks
+that the sender is on the list by means of a linear search. It is necessary to
+check for the existence of the file before trying to search it, because
+otherwise Exim thinks there is a configuration error. If the file does not
+exist, the expansion of senders is *, which matches all senders. This means
+that the router runs, but because there is no list, declines, and no_more
+ensures that no further routers are run. The address fails with an "unrouteable
+address" error.
+
+The third router runs only if the second router is skipped, which happens when
+a mailing list exists, but the sender is not on it. This router forcibly fails
+the address, giving a suitable error message.
+
+
+51.6 Variable Envelope Return Paths (VERP)
+------------------------------------------
+
+Variable Envelope Return Paths - see https://cr.yp.to/proto/verp.txt - are a
+way of helping mailing list administrators discover which subscription address
+is the cause of a particular delivery failure. The idea is to encode the
+original recipient address in the outgoing envelope sender address, so that if
+the message is forwarded by another host and then subsequently bounces, the
+original recipient can be extracted from the recipient address of the bounce.
+
+Envelope sender addresses can be modified by Exim using two different
+facilities: the errors_to option on a router (as shown in previous mailing list
+examples), or the return_path option on a transport. The second of these is
+effective only if the message is successfully delivered to another host; it is
+not used for errors detected on the local host (see the description of 
+return_path in chapter 24). Here is an example of the use of return_path to
+implement VERP on an smtp transport:
+
+verp_smtp:
+  driver = smtp
+  max_rcpt = 1
+  return_path = \
+    ${if match {$return_path}{^(.+?)-request@your.dom.example\$}\
+      {${quote_local_part:$1-request+$local_part=$domain}@your.dom.example}fail}
+
+This has the effect of rewriting the return path (envelope sender) on outgoing
+SMTP messages, if the local part of the original return path ends in
+"-request", and the domain is your.dom.example. The rewriting inserts the local
+part and domain of the recipient into the return path. Suppose, for example,
+that a message whose return path has been set to 
+somelist-request@your.dom.example is sent to subscriber@other.dom.example. In
+the transport, the return path is rewritten as
+
+somelist-request+subscriber=other.dom.example@your.dom.example
+
+For this to work, you must tell Exim to send multiple copies of messages that
+have more than one recipient, so that each copy has just one recipient. This is
+achieved by setting max_rcpt to 1. Without this, a single copy of a message
+might be sent to several different recipients in the same domain, in which case
+$local_part is not available in the transport, because it is not unique.
+
+Unless your host is doing nothing but mailing list deliveries, you should
+probably use a separate transport for the VERP deliveries, so as not to use
+extra resources in making one-per-recipient copies for other deliveries. This
+can easily be done by expanding the transport option in the router:
+
+dnslookup:
+  driver = dnslookup
+  domains = ! +local_domains
+  transport = \
+    ${if match {$return_path}{^(.+?)-request@your.dom.example\$}\
+      {verp_smtp}{remote_smtp}}
+  no_more
+
+If you want to change the return path using errors_to in a router instead of
+using return_path in the transport, you need to set errors_to on all routers
+that handle mailing list addresses. This will ensure that all delivery errors,
+including those detected on the local host, are sent to the VERP address.
+
+On a host that does no local deliveries and has no manual routing, only the 
+dnslookup router needs to be changed. A special transport is not needed for
+SMTP deliveries. Every mailing list recipient has its own return path value,
+and so Exim must hand them to the transport one at a time. Here is an example
+of a dnslookup router that implements VERP:
+
+verp_dnslookup:
+  driver = dnslookup
+  domains = ! +local_domains
+  transport = remote_smtp
+  errors_to = \
+    ${if match {$return_path}{^(.+?)-request@your.dom.example\$}}
+     {${quote_local_part:$1-request+$local_part=$domain}@your.dom.example}fail}
+  no_more
+
+Before you start sending out messages with VERPed return paths, you must also
+configure Exim to accept the bounce messages that come back to those paths.
+Typically this is done by setting a local_part_suffix option for a router, and
+using this to route the messages to wherever you want to handle them.
+
+The overhead incurred in using VERP depends very much on the size of the
+message, the number of recipient addresses that resolve to the same remote
+host, and the speed of the connection over which the message is being sent. If
+a lot of addresses resolve to the same host and the connection is slow, sending
+a separate copy of the message for each address may take substantially longer
+than sending a single copy with many recipients (for which VERP cannot be
+used).
+
+
+51.7 Virtual domains
+--------------------
+
+The phrase virtual domain is unfortunately used with two rather different
+meanings:
+
+  * A domain for which there are no real mailboxes; all valid local parts are
+    aliases for other email addresses. Common examples are organizational
+    top-level domains and "vanity" domains.
+
+  * One of a number of independent domains that are all handled by the same
+    host, with mailboxes on that host, but where the mailbox owners do not
+    necessarily have login accounts on that host.
+
+The first usage is probably more common, and does seem more "virtual" than the
+second. This kind of domain can be handled in Exim with a straightforward
+aliasing router. One approach is to create a separate alias file for each
+virtual domain. Exim can test for the existence of the alias file to determine
+whether the domain exists. The dsearch lookup type is useful here, leading to a
+router of this form:
+
+virtual:
+  driver = redirect
+  domains = dsearch;/etc/mail/virtual
+  data = ${lookup{$local_part}lsearch{/etc/mail/virtual/$domain_data}}
+  no_more
+
+The domains option specifies that the router is to be skipped, unless there is
+a file in the /etc/mail/virtual directory whose name is the same as the domain
+that is being processed. The dsearch lookup used results in an untainted
+version of $domain being placed into the $domain_data variable.
+
+When the router runs, it looks up the local part in the file to find a new
+address (or list of addresses). The no_more setting ensures that if the lookup
+fails (leading to data being an empty string), Exim gives up on the address
+without trying any subsequent routers.
+
+This one router can handle all the virtual domains because the alias filenames
+follow a fixed pattern. Permissions can be arranged so that appropriate people
+can edit the different alias files. A successful aliasing operation results in
+a new envelope recipient address, which is then routed from scratch.
+
+The other kind of "virtual" domain can also be handled in a straightforward
+way. One approach is to create a file for each domain containing a list of
+valid local parts, and use it in a router like this:
+
+my_domains:
+  driver = accept
+  domains = dsearch;/etc/mail/domains
+  local_parts = lsearch;/etc/mail/domains/$domain
+  transport = my_mailboxes
+
+The address is accepted if there is a file for the domain, and the local part
+can be found in the file. The domains option is used to check for the file's
+existence because domains is tested before the local_parts option (see section
+3.12). You cannot use require_files, because that option is tested after 
+local_parts. The transport is as follows:
+
+my_mailboxes:
+  driver = appendfile
+  file = /var/mail/$domain_data/$local_part_data
+  user = mail
+
+This uses a directory of mailboxes for each domain. The user setting is
+required, to specify which uid is to be used for writing to the mailboxes.
+
+The configuration shown here is just one example of how you might support this
+requirement. There are many other ways this kind of configuration can be set
+up, for example, by using a database instead of separate files to hold all the
+information about the domains.
+
+
+51.8 Multiple user mailboxes
+----------------------------
+
+Heavy email users often want to operate with multiple mailboxes, into which
+incoming mail is automatically sorted. A popular way of handling this is to
+allow users to use multiple sender addresses, so that replies can easily be
+identified. Users are permitted to add prefixes or suffixes to their local
+parts for this purpose. The wildcard facility of the generic router options 
+local_part_prefix and local_part_suffix can be used for this. For example,
+consider this router:
+
+userforward:
+  driver = redirect
+  check_local_user
+  file = $home/.forward
+  local_part_suffix = -*
+  local_part_suffix_optional
+  allow_filter
+
+It runs a user's .forward file for all local parts of the form username-*.
+Within the filter file the user can distinguish different cases by testing the
+variable $local_part_suffix. For example:
+
+if $local_part_suffix contains -special then
+save /home/$local_part_data/Mail/special
+endif
+
+If the filter file does not exist, or does not deal with such addresses, they
+fall through to subsequent routers, and, assuming no subsequent use of the 
+local_part_suffix option is made, they presumably fail. Thus, users have
+control over which suffixes are valid.
+
+Alternatively, a suffix can be used to trigger the use of a different .forward
+file - which is the way a similar facility is implemented in another MTA:
+
+userforward:
+  driver = redirect
+  check_local_user
+  local_part_suffix = -*
+  local_part_suffix_optional
+  file = ${lookup {.forward$local_part_suffix} dsearch,ret=full {$home} {$value}fail}
+  allow_filter
+
+If there is no suffix, .forward is used; if the suffix is -special, for
+example, .forward-special is used. Once again, if the appropriate file does not
+exist, or does not deal with the address, it is passed on to subsequent
+routers, which could, if required, look for an unqualified .forward file to use
+as a default.
+
+
+51.9 Simplified vacation processing
+-----------------------------------
+
+The traditional way of running the vacation program is for a user to set up a
+pipe command in a .forward file (see section 22.6 for syntax details). This is
+prone to error by inexperienced users. There are two features of Exim that can
+be used to make this process simpler for users:
+
+  * A local part prefix such as "vacation-" can be specified on a router which
+    can cause the message to be delivered directly to the vacation program, or
+    alternatively can use Exim's autoreply transport. The contents of a user's
+    .forward file are then much simpler. For example:
+
+    spqr, vacation-spqr
+
+  * The require_files generic router option can be used to trigger a vacation
+    delivery by checking for the existence of a certain file in the user's home
+    directory. The unseen generic option should also be used, to ensure that
+    the original delivery also proceeds. In this case, all the user has to do
+    is to create a file called, say, .vacation, containing a vacation message.
+
+Another advantage of both these methods is that they both work even when the
+use of arbitrary pipes by users is locked out.
+
+
+51.10 Taking copies of mail
+---------------------------
+
+Some installations have policies that require archive copies of all messages to
+be made. A single copy of each message can easily be taken by an appropriate
+command in a system filter, which could, for example, use a different file for
+each day's messages.
+
+There is also a shadow transport mechanism that can be used to take copies of
+messages that are successfully delivered by local transports, one copy per
+delivery. This could be used, inter alia, to implement automatic notification
+of delivery by sites that insist on doing such things.
+
+
+51.11 Intermittently connected hosts
+------------------------------------
+
+It has become quite common (because it is cheaper) for hosts to connect to the
+Internet periodically rather than remain connected all the time. The normal
+arrangement is that mail for such hosts accumulates on a system that is
+permanently connected.
+
+Exim was designed for use on permanently connected hosts, and so it is not
+particularly well-suited to use in an intermittently connected environment.
+Nevertheless there are some features that can be used.
+
+
+51.12 Exim on the upstream server host
+--------------------------------------
+
+It is tempting to arrange for incoming mail for the intermittently connected
+host to remain in Exim's queue until the client connects. However, this
+approach does not scale very well. Two different kinds of waiting message are
+being mixed up in the same queue - those that cannot be delivered because of
+some temporary problem, and those that are waiting for their destination host
+to connect. This makes it hard to manage the queue, as well as wasting
+resources, because each queue runner scans the entire queue.
+
+A better approach is to separate off those messages that are waiting for an
+intermittently connected host. This can be done by delivering these messages
+into local files in batch SMTP, "mailstore", or other envelope-preserving
+format, from where they are transmitted by other software when their
+destination connects. This makes it easy to collect all the mail for one host
+in a single directory, and to apply local timeout rules on a per-message basis
+if required.
+
+On a very small scale, leaving the mail on Exim's queue can be made to work. If
+you are doing this, you should configure Exim with a long retry period for the
+intermittent host. For example:
+
+cheshire.wonderland.fict.example    *   F,5d,24h
+
+This stops a lot of failed delivery attempts from occurring, but Exim remembers
+which messages it has queued up for that host. Once the intermittent host comes
+online, forcing delivery of one message (either by using the -M or -R options,
+or by using the ETRN SMTP command (see section 49.8) causes all the queued up
+messages to be delivered, often down a single SMTP connection. While the host
+remains connected, any new messages get delivered immediately.
+
+If the connecting hosts do not have fixed IP addresses, that is, if a host is
+issued with a different IP address each time it connects, Exim's retry
+mechanisms on the holding host get confused, because the IP address is normally
+used as part of the key string for holding retry information. This can be
+avoided by unsetting retry_include_ip_address on the smtp transport. Since this
+has disadvantages for permanently connected hosts, it is best to arrange a
+separate transport for the intermittently connected ones.
+
+
+51.13 Exim on the intermittently connected client host
+------------------------------------------------------
+
+The value of smtp_accept_queue_per_connection should probably be increased, or
+even set to zero (that is, disabled) on the intermittently connected host, so
+that all incoming messages down a single connection get delivered immediately.
+
+Mail waiting to be sent from an intermittently connected host will probably not
+have been routed, because without a connection DNS lookups are not possible.
+This means that if a normal queue run is done at connection time, each message
+is likely to be sent in a separate SMTP session. This can be avoided by
+starting the queue run with a command line option beginning with -qq instead of
+-q. In this case, the queue is scanned twice. In the first pass, routing is
+done but no deliveries take place. The second pass is a normal queue run; since
+all the messages have been previously routed, those destined for the same host
+are likely to get sent as multiple deliveries in a single SMTP connection.
+
+
+
+===============================================================================
+52. USING EXIM AS A NON-QUEUEING CLIENT
+
+On a personal computer, it is a common requirement for all email to be sent to
+a "smart host". There are plenty of MUAs that can be configured to operate that
+way, for all the popular operating systems. However, there are some MUAs for
+Unix-like systems that cannot be so configured: they submit messages using the
+command line interface of /usr/sbin/sendmail. Furthermore, utility programs
+such as cron submit messages this way.
+
+If the personal computer runs continuously, there is no problem, because it can
+run a conventional MTA that handles delivery to the smart host, and deal with
+any delays via its queueing mechanism. However, if the computer does not run
+continuously or runs different operating systems at different times, queueing
+email is not desirable.
+
+There is therefore a requirement for something that can provide the /usr/sbin/
+sendmail interface but deliver messages to a smart host without any queueing or
+retrying facilities. Furthermore, the delivery to the smart host should be
+synchronous, so that if it fails, the sending MUA is immediately informed. In
+other words, we want something that extends an MUA that submits to a local MTA
+via the command line so that it behaves like one that submits to a remote smart
+host using TCP/SMTP.
+
+There are a number of applications (for example, there is one called ssmtp)
+that do this job. However, people have found them to be lacking in various
+ways. For instance, you might want to allow aliasing and forwarding to be done
+before sending a message to the smart host.
+
+Exim already had the necessary infrastructure for doing this job. Just a few
+tweaks were needed to make it behave as required, though it is somewhat of an
+overkill to use a fully-featured MTA for this purpose.
+
+There is a Boolean global option called mua_wrapper, defaulting false. Setting 
+mua_wrapper true causes Exim to run in a special mode where it assumes that it
+is being used to "wrap" a command-line MUA in the manner just described. As
+well as setting mua_wrapper, you also need to provide a compatible router and
+transport configuration. Typically there will be just one router and one
+transport, sending everything to a smart host.
+
+When run in MUA wrapping mode, the behaviour of Exim changes in the following
+ways:
+
+  * A daemon cannot be run, nor will Exim accept incoming messages from inetd.
+    In other words, the only way to submit messages is via the command line.
+
+  * Each message is synchronously delivered as soon as it is received (-odi is
+    assumed). All queueing options (queue_only, queue_smtp_domains, control in
+    an ACL, etc.) are quietly ignored. The Exim reception process does not
+    finish until the delivery attempt is complete. If the delivery is
+    successful, a zero return code is given.
+
+  * Address redirection is permitted, but the final routing for all addresses
+    must be to the same remote transport, and to the same list of hosts.
+    Furthermore, the return address (envelope sender) must be the same for all
+    recipients, as must any added or deleted header lines. In other words, it
+    must be possible to deliver the message in a single SMTP transaction,
+    however many recipients there are.
+
+  * If these conditions are not met, or if routing any address results in a
+    failure or defer status, or if Exim is unable to deliver all the recipients
+    successfully to one of the smart hosts, delivery of the entire message
+    fails.
+
+  * Because no queueing is allowed, all failures are treated as permanent;
+    there is no distinction between 4xx and 5xx SMTP response codes from the
+    smart host. Furthermore, because only a single yes/no response can be given
+    to the caller, it is not possible to deliver to some recipients and not
+    others. If there is an error (temporary or permanent) for any recipient,
+    all are failed.
+
+  * If more than one smart host is listed, Exim will try another host after a
+    connection failure or a timeout, in the normal way. However, if this kind
+    of failure happens for all the hosts, the delivery fails.
+
+  * When delivery fails, an error message is written to the standard error
+    stream (as well as to Exim's log), and Exim exits to the caller with a
+    return code value 1. The message is expunged from Exim's spool files. No
+    bounce messages are ever generated.
+
+  * No retry data is maintained, and any retry rules are ignored.
+
+  * A number of Exim options are overridden: deliver_drop_privilege is forced
+    true, max_rcpt in the smtp transport is forced to "unlimited", 
+    remote_max_parallel is forced to one, and fallback hosts are ignored.
+
+The overall effect is that Exim makes a single synchronous attempt to deliver
+the message, failing if there is any kind of problem. Because no local
+deliveries are done and no daemon can be run, Exim does not need root
+privilege. It should be possible to run it setuid to exim instead of setuid to 
+root. See section 56.3 for a general discussion about the advantages and
+disadvantages of running without root privilege.
+
+
+
+===============================================================================
+53. LOG FILES
+
+Exim writes three different logs, referred to as the main log, the reject log,
+and the panic log:
+
+  * The main log records the arrival of each message and each delivery in a
+    single line in each case. The format is as compact as possible, in an
+    attempt to keep down the size of log files. Two-character flag sequences
+    make it easy to pick out these lines. A number of other events are recorded
+    in the main log. Some of them are optional, in which case the log_selector
+    option controls whether they are included or not. A Perl script called 
+    eximstats, which does simple analysis of main log files, is provided in the
+    Exim distribution (see section 54.7).
+
+  * The reject log records information from messages that are rejected as a
+    result of a configuration option (that is, for policy reasons). The first
+    line of each rejection is a copy of the line that is also written to the
+    main log. Then, if the message's header has been read at the time the log
+    is written, its contents are written to this log. Only the original header
+    lines are available; header lines added by ACLs are not logged. You can use
+    the reject log to check that your policy controls are working correctly; on
+    a busy host this may be easier than scanning the main log for rejection
+    messages. You can suppress the writing of the reject log by setting 
+    write_rejectlog false.
+
+  * When certain serious errors occur, Exim writes entries to its panic log. If
+    the error is sufficiently disastrous, Exim bombs out afterwards. Panic log
+    entries are usually written to the main log as well, but can get lost amid
+    the mass of other entries. The panic log should be empty under normal
+    circumstances. It is therefore a good idea to check it (or to have a cron
+    script check it) regularly, in order to become aware of any problems. When
+    Exim cannot open its panic log, it tries as a last resort to write to the
+    system log (syslog). This is opened with LOG_PID+LOG_CONS and the facility
+    code of LOG_MAIL. The message itself is written at priority LOG_CRIT.
+
+Every log line starts with a timestamp, in the format shown in the following
+example. Note that many of the examples shown in this chapter are line-wrapped.
+In the log file, this would be all on one line:
+
+2001-09-16 16:09:47 SMTP connection from [127.0.0.1] closed
+  by QUIT
+
+By default, the timestamps are in the local timezone. There are two ways of
+changing this:
+
+  * You can set the timezone option to a different time zone; in particular, if
+    you set
+
+    timezone = UTC
+
+    the timestamps will be in UTC (aka GMT).
+
+  * If you set log_timezone true, the time zone is added to the timestamp, for
+    example:
+
+    2003-04-25 11:17:07 +0100 Start queue run: pid=12762
+
+Exim does not include its process id in log lines by default, but you can
+request that it does so by specifying the "pid" log selector (see section 53.15
+). When this is set, the process id is output, in square brackets, immediately
+after the time and date.
+
+
+53.1 Where the logs are written
+-------------------------------
+
+The logs may be written to local files, or to syslog, or both. However, it
+should be noted that many syslog implementations use UDP as a transport, and
+are therefore unreliable in the sense that messages are not guaranteed to
+arrive at the loghost, nor is the ordering of messages necessarily maintained.
+It has also been reported that on large log files (tens of megabytes) you may
+need to tweak syslog to prevent it syncing the file with each write - on Linux
+this has been seen to make syslog take 90% plus of CPU time.
+
+The destination for Exim's logs is configured by setting LOG_FILE_PATH in Local
+/Makefile or by setting log_file_path in the runtime configuration. This latter
+string is expanded, so it can contain, for example, references to the host
+name:
+
+log_file_path = /var/log/$primary_hostname/exim_%slog
+
+It is generally advisable, however, to set the string in Local/Makefile rather
+than at runtime, because then the setting is available right from the start of
+Exim's execution. Otherwise, if there's something it wants to log before it has
+read the configuration file (for example, an error in the configuration file)
+it will not use the path you want, and may not be able to log at all.
+
+The value of LOG_FILE_PATH or log_file_path is a colon-separated list,
+currently limited to at most two items. This is one option where the facility
+for changing a list separator may not be used. The list must always be
+colon-separated. If an item in the list is "syslog" then syslog is used;
+otherwise the item must either be an absolute path, containing "%s" at the
+point where "main", "reject", or "panic" is to be inserted, or be empty,
+implying the use of a default path.
+
+When Exim encounters an empty item in the list, it searches the list defined by
+LOG_FILE_PATH, and uses the first item it finds that is neither empty nor
+"syslog". This means that an empty item in log_file_path can be used to mean
+"use the path specified at build time". If no such item exists, log files are
+written in the log subdirectory of the spool directory. This is equivalent to
+the configuration file setting:
+
+log_file_path = $spool_directory/log/%slog
+
+If you do not specify anything at build time or runtime, or if you unset the
+option at runtime (i.e. "log_file_path = "), that is where the logs are
+written.
+
+A log file path may also contain "%D" or "%M" if datestamped log filenames are
+in use - see section 53.3 below.
+
+Here are some examples of possible Makefile settings:
+
+LOG_FILE_PATH=syslog                     syslog only
+LOG_FILE_PATH=:syslog                    syslog and default path
+LOG_FILE_PATH=syslog : /usr/log/exim_%s  syslog and specified path
+LOG_FILE_PATH=/usr/log/exim_%s           specified path only
+
+If there are more than two paths in the list, the first is used and a panic
+error is logged.
+
+
+53.2 Logging to local files that are periodically "cycled"
+----------------------------------------------------------
+
+Some operating systems provide centralized and standardized methods for cycling
+log files. For those that do not, a utility script called exicyclog is provided
+(see section 54.6). This renames and compresses the main and reject logs each
+time it is called. The maximum number of old logs to keep can be set. It is
+suggested this script is run as a daily cron job.
+
+An Exim delivery process opens the main log when it first needs to write to it,
+and it keeps the file open in case subsequent entries are required - for
+example, if a number of different deliveries are being done for the same
+message. However, remote SMTP deliveries can take a long time, and this means
+that the file may be kept open long after it is renamed if exicyclog or
+something similar is being used to rename log files on a regular basis. To
+ensure that a switch of log files is noticed as soon as possible, Exim calls
+stat() on the main log's name before reusing an open file, and if the file does
+not exist, or its inode has changed, the old file is closed and Exim tries to
+open the main log from scratch. Thus, an old log file may remain open for quite
+some time, but no Exim processes should write to it once it has been renamed.
+
+
+53.3 Datestamped log files
+--------------------------
+
+Instead of cycling the main and reject log files by renaming them periodically,
+some sites like to use files whose names contain a datestamp, for example,
+mainlog-20031225. The datestamp is in the form yyyymmdd or yyyymm. Exim has
+support for this way of working. It is enabled by setting the log_file_path
+option to a path that includes "%D" or "%M" at the point where the datestamp is
+required. For example:
+
+log_file_path = /var/spool/exim/log/%slog-%D
+log_file_path = /var/log/exim-%s-%D.log
+log_file_path = /var/spool/exim/log/%D-%slog
+log_file_path = /var/log/exim/%s.%M
+
+As before, "%s" is replaced by "main" or "reject"; the following are examples
+of names generated by the above examples:
+
+/var/spool/exim/log/mainlog-20021225
+/var/log/exim-reject-20021225.log
+/var/spool/exim/log/20021225-mainlog
+/var/log/exim/main.200212
+
+When this form of log file is specified, Exim automatically switches to new
+files at midnight. It does not make any attempt to compress old logs; you will
+need to write your own script if you require this. You should not run exicyclog
+with this form of logging.
+
+The location of the panic log is also determined by log_file_path, but it is
+not datestamped, because rotation of the panic log does not make sense. When
+generating the name of the panic log, "%D" or "%M" are removed from the string.
+In addition, if it immediately follows a slash, a following non-alphanumeric
+character is removed; otherwise a preceding non-alphanumeric character is
+removed. Thus, the four examples above would give these panic log names:
+
+/var/spool/exim/log/paniclog
+/var/log/exim-panic.log
+/var/spool/exim/log/paniclog
+/var/log/exim/panic
+
+
+53.4 Logging to syslog
+----------------------
+
+The use of syslog does not change what Exim logs or the format of its messages,
+except in one respect. If syslog_timestamp is set false, the timestamps on
+Exim's log lines are omitted when these lines are sent to syslog. Apart from
+that, the same strings are written to syslog as to log files. The syslog
+"facility" is set to LOG_MAIL, and the program name to "exim" by default, but
+you can change these by setting the syslog_facility and syslog_processname
+options, respectively. If Exim was compiled with SYSLOG_LOG_PID set in Local/
+Makefile (this is the default in src/EDITME), then, on systems that permit it
+(all except ULTRIX), the LOG_PID flag is set so that the syslog() call adds the
+pid as well as the time and host name to each line. The three log streams are
+mapped onto syslog priorities as follows:
+
+  * mainlog is mapped to LOG_INFO
+
+  * rejectlog is mapped to LOG_NOTICE
+
+  * paniclog is mapped to LOG_ALERT
+
+Many log lines are written to both mainlog and rejectlog, and some are written
+to both mainlog and paniclog, so there will be duplicates if these are routed
+by syslog to the same place. You can suppress this duplication by setting 
+syslog_duplication false.
+
+Exim's log lines can sometimes be very long, and some of its rejectlog entries
+contain multiple lines when headers are included. To cope with both these
+cases, entries written to syslog are split into separate syslog() calls at each
+internal newline, and also after a maximum of 870 data characters. (This allows
+for a total syslog line length of 1024, when additions such as timestamps are
+added.) If you are running a syslog replacement that can handle lines longer
+than the 1024 characters allowed by RFC 3164, you should set
+
+SYSLOG_LONG_LINES=yes
+
+in Local/Makefile before building Exim. That stops Exim from splitting long
+lines, but it still splits at internal newlines in reject log entries.
+
+To make it easy to re-assemble split lines later, each component of a split
+entry starts with a string of the form [<n>/<m>] or [<n>\<m>] where <n> is the
+component number and <m> is the total number of components in the entry. The /
+delimiter is used when the line was split because it was too long; if it was
+split because of an internal newline, the \ delimiter is used. For example,
+supposing the length limit to be 50 instead of 870, the following would be the
+result of a typical rejection message to mainlog (LOG_INFO), each line in
+addition being preceded by the time, host name, and pid as added by syslog:
+
+[1/5] 2002-09-16 16:09:43 16RdAL-0006pc-00 rejected from
+[2/5]  [127.0.0.1] (ph10): syntax error in 'From' header
+[3/5]  when scanning for sender: missing or malformed lo
+[4/5] cal part in "<>" (envelope sender is <ph10@cam.exa
+[5/5] mple>)
+
+The same error might cause the following lines to be written to "rejectlog"
+(LOG_NOTICE):
+
+[1/18] 2002-09-16 16:09:43 16RdAL-0006pc-00 rejected fro
+[2/18] m [127.0.0.1] (ph10): syntax error in 'From' head
+[3/18] er when scanning for sender: missing or malformed
+[4/18]  local part in "<>" (envelope sender is <ph10@cam
+[5\18] .example>)
+[6\18] Recipients: ph10@some.domain.cam.example
+[7\18] P Received: from [127.0.0.1] (ident=ph10)
+[8\18]        by xxxxx.cam.example with smtp (Exim 4.00)
+[9\18]        id 16RdAL-0006pc-00
+[10/18]        for ph10@cam.example; Mon, 16 Sep 2002 16:
+[11\18] 09:43 +0100
+[12\18] F From: <>
+[13\18]   Subject: this is a test header
+[18\18]   X-something: this is another header
+[15/18] I Message-Id: <E16RdAL-0006pc-00@xxxxx.cam.examp
+[16\18] le>
+[17\18] B Bcc:
+[18/18]   Date: Mon, 16 Sep 2002 16:09:43 +0100
+
+Log lines that are neither too long nor contain newlines are written to syslog
+without modification.
+
+If only syslog is being used, the Exim monitor is unable to provide a log tail
+display, unless syslog is routing mainlog to a file on the local host and the
+environment variable EXIMON_LOG_FILE_PATH is set to tell the monitor where it
+is.
+
+
+53.5 Log line flags
+-------------------
+
+One line is written to the main log for each message received, and for each
+successful, unsuccessful, and delayed delivery. These lines can readily be
+picked out by the distinctive two-character flags that immediately follow the
+timestamp. The flags are:
+
+    <= message arrival
+    (= message fakereject
+    => normal message delivery
+    -> additional address in same delivery
+    >> cutthrough message delivery
+    *> delivery suppressed by -N
+    ** delivery failed; address bounced
+    == delivery deferred; temporary problem
+
+
+53.6 Logging message reception
+------------------------------
+
+The format of the single-line entry in the main log that is written for every
+message received is shown in the basic example below, which is split over
+several lines in order to fit it on the page:
+
+2002-10-31 08:57:53 16ZCW1-0005MB-00 <= kryten@dwarf.fict.example
+  H=mailer.fict.example [192.168.123.123] U=exim
+  P=smtp S=5678 id=<incoming message id>
+
+The address immediately following "<=" is the envelope sender address. A bounce
+message is shown with the sender address "<>", and if it is locally generated,
+this is followed by an item of the form
+
+R=<message id>
+
+which is a reference to the message that caused the bounce to be sent.
+
+For messages from other hosts, the H and U fields identify the remote host and
+record the RFC 1413 identity of the user that sent the message, if one was
+received. The number given in square brackets is the IP address of the sending
+host. If there is a single, unparenthesized host name in the H field, as above,
+it has been verified to correspond to the IP address (see the host_lookup
+option). If the name is in parentheses, it was the name quoted by the remote
+host in the SMTP HELO or EHLO command, and has not been verified. If
+verification yields a different name to that given for HELO or EHLO, the
+verified name appears first, followed by the HELO or EHLO name in parentheses.
+
+Misconfigured hosts (and mail forgers) sometimes put an IP address, with or
+without brackets, in the HELO or EHLO command, leading to entries in the log
+containing text like these examples:
+
+H=(10.21.32.43) [192.168.8.34]
+H=([10.21.32.43]) [192.168.8.34]
+
+This can be confusing. Only the final address in square brackets can be relied
+on.
+
+For locally generated messages (that is, messages not received over TCP/IP),
+the H field is omitted, and the U field contains the login name of the caller
+of Exim.
+
+For all messages, the P field specifies the protocol used to receive the
+message. This is the value that is stored in $received_protocol. In the case of
+incoming SMTP messages, the value indicates whether or not any SMTP extensions
+(ESMTP), encryption, or authentication were used. If the SMTP session was
+encrypted, there is an additional X field that records the cipher suite that
+was used.
+
+The protocol is set to "esmtpsa" or "esmtpa" for messages received from hosts
+that have authenticated themselves using the SMTP AUTH command. The first value
+is used when the SMTP connection was encrypted ("secure"). In this case there
+is an additional item A= followed by the name of the authenticator that was
+used. If an authenticated identification was set up by the authenticator's 
+server_set_id option, this is logged too, separated by a colon from the
+authenticator name.
+
+The id field records the existing message id, if present. The size of the
+received message is given by the S field. When the message is delivered,
+headers may be removed or added, so that the size of delivered copies of the
+message may not correspond with this value (and indeed may be different to each
+other).
+
+The log_selector option can be used to request the logging of additional data
+when a message is received. See section 53.15 below.
+
+
+53.7 Logging deliveries
+-----------------------
+
+The format of the single-line entry in the main log that is written for every
+delivery is shown in one of the examples below, for local and remote
+deliveries, respectively. Each example has been split into multiple lines in
+order to fit it on the page:
+
+2002-10-31 08:59:13 16ZCW1-0005MB-00 => marv
+  <marv@hitch.fict.example> R=localuser T=local_delivery
+2002-10-31 09:00:10 16ZCW1-0005MB-00 =>
+  monk@holistic.fict.example R=dnslookup T=remote_smtp
+  H=holistic.fict.example [192.168.234.234]
+
+For ordinary local deliveries, the original address is given in angle brackets
+after the final delivery address, which might be a pipe or a file. If
+intermediate address(es) exist between the original and the final address, the
+last of these is given in parentheses after the final address. The R and T
+fields record the router and transport that were used to process the address.
+
+If SMTP AUTH was used for the delivery there is an additional item A= followed
+by the name of the authenticator that was used. If an authenticated
+identification was set up by the authenticator's client_set_id option, this is
+logged too, as a second colon-separated list item. Optionally (see the 
+smtp_mailauth log_selector) there may be a third list item.
+
+If a shadow transport was run after a successful local delivery, the log line
+for the successful delivery has an item added on the end, of the form
+
+ST=<shadow transport name>
+
+If the shadow transport did not succeed, the error message is put in
+parentheses afterwards.
+
+When more than one address is included in a single delivery (for example, two
+SMTP RCPT commands in one transaction) the second and subsequent addresses are
+flagged with "->" instead of "=>". When two or more messages are delivered down
+a single SMTP connection, an asterisk follows the remote IP address (and port
+if enabled) in the log lines for the second and subsequent messages. When two
+or more messages are delivered down a single TLS connection, the DNS and some
+TLS-related information logged for the first message delivered will not be
+present in the log lines for the second and subsequent messages. TLS cipher
+information is still available.
+
+When delivery is done in cutthrough mode it is flagged with ">>" and the log
+line precedes the reception line, since cutthrough waits for a possible
+rejection from the destination in case it can reject the sourced item.
+
+The generation of a reply message by a filter file gets logged as a "delivery"
+to the addressee, preceded by ">".
+
+The log_selector option can be used to request the logging of additional data
+when a message is delivered. See section 53.15 below.
+
+
+53.8 Discarded deliveries
+-------------------------
+
+When a message is discarded as a result of the command "seen finish" being
+obeyed in a filter file which generates no deliveries, a log entry of the form
+
+2002-12-10 00:50:49 16auJc-0001UB-00 => discarded
+  <low.club@bridge.example> R=userforward
+
+is written, to record why no deliveries are logged. When a message is discarded
+because it is aliased to ":blackhole:" the log line is like this:
+
+1999-03-02 09:44:33 10HmaX-0005vi-00 => :blackhole:
+  <hole@nowhere.example> R=blackhole_router
+
+
+53.9 Deferred deliveries
+------------------------
+
+When a delivery is deferred, a line of the following form is logged:
+
+2002-12-19 16:20:23 16aiQz-0002Q5-00 == marvin@endrest.example
+  R=dnslookup T=smtp defer (146): Connection refused
+
+In the case of remote deliveries, the error is the one that was given for the
+last IP address that was tried. Details of individual SMTP failures are also
+written to the log, so the above line would be preceded by something like
+
+2002-12-19 16:20:23 16aiQz-0002Q5-00 Failed to connect to
+  mail1.endrest.example [192.168.239.239]: Connection refused
+
+When a deferred address is skipped because its retry time has not been reached,
+a message is written to the log, but this can be suppressed by setting an
+appropriate value in log_selector.
+
+
+53.10 Delivery failures
+-----------------------
+
+If a delivery fails because an address cannot be routed, a line of the
+following form is logged:
+
+1995-12-19 16:20:23 0tRiQz-0002Q5-00 ** jim@trek99.example
+  <jim@trek99.example>: unknown mail domain
+
+If a delivery fails at transport time, the router and transport are shown, and
+the response from the remote host is included, as in this example:
+
+2002-07-11 07:14:17 17SXDU-000189-00 ** ace400@pb.example
+  R=dnslookup T=remote_smtp: SMTP error from remote mailer
+  after pipelined RCPT TO:<ace400@pb.example>: host
+  pbmail3.py.example [192.168.63.111]: 553 5.3.0
+  <ace400@pb.example>...Addressee unknown
+
+The word "pipelined" indicates that the SMTP PIPELINING extension was being
+used. See hosts_avoid_esmtp in the smtp transport for a way of disabling
+PIPELINING. The log lines for all forms of delivery failure are flagged with
+"**".
+
+
+53.11 Fake deliveries
+---------------------
+
+If a delivery does not actually take place because the -N option has been used
+to suppress it, a normal delivery line is written to the log, except that "=>"
+is replaced by "*>".
+
+
+53.12 Completion
+----------------
+
+A line of the form
+
+2002-10-31 09:00:11 16ZCW1-0005MB-00 Completed
+
+is written to the main log when a message is about to be removed from the spool
+at the end of its processing.
+
+
+53.13 Summary of Fields in Log Lines
+------------------------------------
+
+A summary of the field identifiers that are used in log lines is shown in the
+following table:
+
+A           authenticator name (and optional id and sender)
+C           SMTP confirmation on delivery
+            command list for "no mail in SMTP session"
+CV          certificate verification status
+D           duration of "no mail in SMTP session"
+DKIM        domain verified in incoming message
+DN          distinguished name from peer certificate
+DS          DNSSEC secured lookups
+DT          on =>, == and ** lines: time taken for, or to attempt, a delivery
+F           sender address (on delivery lines)
+H           host name and IP address
+I           local interface used
+id          message id (from header) for incoming message
+K           CHUNKING extension used
+L           on <= and => lines: PIPELINING extension used
+M8S         8BITMIME status for incoming message
+P           on <= lines: protocol used
+            on => and ** lines: return path
+PRDR        PRDR extension used
+PRX         on <= and => lines: proxy address
+Q           alternate queue name
+QT          on => lines: time spent on queue so far
+            on "Completed" lines: time spent on queue
+R           on <= lines: reference for local bounce
+            on =>  >> ** and == lines: router name
+RT          on <= lines: time taken for reception
+S           size of message in bytes
+SNI         server name indication from TLS client hello
+ST          shadow transport name
+T           on <= lines: message subject (topic)
+TFO         connection took advantage of TCP Fast Open
+            on => ** and == lines: transport name
+U           local user or RFC 1413 identity
+X           TLS cipher suite
+
+
+53.14 Other log entries
+-----------------------
+
+Various other types of log entry are written from time to time. Most should be
+self-explanatory. Among the more common are:
+
+  * retry time not reached  An address previously suffered a temporary error
+    during routing or local delivery, and the time to retry has not yet
+    arrived. This message is not written to an individual message log file
+    unless it happens during the first delivery attempt.
+
+  * retry time not reached for any host  An address previously suffered
+    temporary errors during remote delivery, and the retry time has not yet
+    arrived for any of the hosts to which it is routed.
+
+  * spool file locked  An attempt to deliver a message cannot proceed because
+    some other Exim process is already working on the message. This can be
+    quite common if queue running processes are started at frequent intervals.
+    The exiwhat utility script can be used to find out what Exim processes are
+    doing.
+
+  * error ignored  There are several circumstances that give rise to this
+    message:
+
+     1. Exim failed to deliver a bounce message whose age was greater than 
+        ignore_bounce_errors_after. The bounce was discarded.
+
+     2. A filter file set up a delivery using the "noerror" option, and the
+        delivery failed. The delivery was discarded.
+
+     3. A delivery set up by a router configured with
+
+            errors_to = <>
+
+        failed. The delivery was discarded.
+
+  * DKIM: d=  Verbose results of a DKIM verification attempt, if enabled for
+    logging and the message has a DKIM signature header.
+
+
+53.15 Reducing or increasing what is logged
+-------------------------------------------
+
+By setting the log_selector global option, you can disable some of Exim's
+default logging, or you can request additional logging. The value of 
+log_selector is made up of names preceded by plus or minus characters. For
+example:
+
+log_selector = +arguments -retry_defer
+
+The list of optional log items is in the following table, with the default
+selection marked by asterisks:
+
+    "8bitmime"                      received 8BITMIME status
+    "acl_warn_skipped"            * skipped warn statement in ACL
+    "address_rewrite"               address rewriting
+    "all_parents"                   all parents in => lines
+    "arguments"                     command line arguments
+    "connection_reject"           * connection rejections
+    "delay_delivery"              * immediate delivery delayed
+    "deliver_time"                  time taken to attempt delivery
+    "delivery_size"                 add "S="nnn to => lines
+    "dkim"                        * DKIM verified domain on <= lines
+    "dkim_verbose"                  separate full DKIM verification result
+                                    line, per signature
+    "dnslist_defer"               * defers of DNS list (aka RBL) lookups
+    "dnssec"                        DNSSEC secured lookups
+    "etrn"                        * ETRN commands
+    "host_lookup_failed"          * as it says
+    "ident_timeout"                 timeout for ident connection
+    "incoming_interface"            local interface on <= and => lines
+    "incoming_port"                 remote port on <= lines
+    "lost_incoming_connection"    * as it says (includes timeouts)
+    "millisec"                      millisecond timestamps and RT,QT,DT,D times
+    "msg_id"                      * on <= lines, Message-ID: header value
+    "msg_id_created"                on <= lines, Message-ID: header value when
+                                    one had to be added
+    "outgoing_interface"            local interface on => lines
+    "outgoing_port"                 add remote port to => lines
+    "queue_run"                   * start and end queue runs
+    "queue_time"                    time on queue for one recipient
+    "queue_time_exclusive"          exclude recieve time from QT times
+    "queue_time_overall"            time on queue for whole message
+    "pid"                           Exim process id
+    "pipelining"                    PIPELINING use, on <= and => lines
+    "proxy"                         proxy address on <= and => lines
+    "receive_time"                  time taken to receive message
+    "received_recipients"           recipients on <= lines
+    "received_sender"               sender on <= lines
+    "rejected_header"             * header contents on reject log
+    "retry_defer"                 * "retry time not reached"
+    "return_path_on_delivery"       put return path on => and ** lines
+    "sender_on_delivery"            add sender to => lines
+    "sender_verify_fail"          * sender verification failures
+    "size_reject"                 * rejection because too big
+    "skip_delivery"               * delivery skipped in a queue run
+    "smtp_confirmation"           * SMTP confirmation on => lines
+    "smtp_connection"               incoming SMTP connections
+    "smtp_incomplete_transaction"   incomplete SMTP transactions
+    "smtp_mailauth"                 AUTH argument to MAIL commands
+    "smtp_no_mail"                  session with no MAIL commands
+    "smtp_protocol_error"           SMTP protocol errors
+    "smtp_syntax_error"             SMTP syntax errors
+    "subject"                       contents of Subject: on <= lines
+    "tls_certificate_verified"    * certificate verification status
+    "tls_cipher"                  * TLS cipher suite on <= and => lines
+    "tls_peerdn"                    TLS peer DN on <= and => lines
+    "tls_resumption"                append * to cipher field
+    "tls_sni"                       TLS SNI on <= lines
+    "unknown_in_list"               DNS lookup failed in list match
+    "all"                           all of the above
+
+See also the slow_lookup_log main configuration option, section 14.4
+
+More details on each of these items follows:
+
+  * 8bitmime: This causes Exim to log any 8BITMIME status of received messages,
+    which may help in tracking down interoperability issues with ancient MTAs
+    that are not 8bit clean. This is added to the "<=" line, tagged with "M8S="
+    and a value of "0", "7" or "8", corresponding to "not given", "7BIT" and
+    "8BITMIME" respectively.
+
+  * acl_warn_skipped: When an ACL warn statement is skipped because one of its
+    conditions cannot be evaluated, a log line to this effect is written if
+    this log selector is set.
+
+  * address_rewrite: This applies both to global rewrites and per-transport
+    rewrites, but not to rewrites in filters run as an unprivileged user
+    (because such users cannot access the log).
+
+  * all_parents: Normally only the original and final addresses are logged on
+    delivery lines; with this selector, intermediate parents are given in
+    parentheses between them.
+
+  * arguments: This causes Exim to write the arguments with which it was called
+    to the main log, preceded by the current working directory. This is a
+    debugging feature, added to make it easier to find out how certain MUAs
+    call /usr/sbin/sendmail. The logging does not happen if Exim has given up
+    root privilege because it was called with the -C or -D options. Arguments
+    that are empty or that contain white space are quoted. Non-printing
+    characters are shown as escape sequences. This facility cannot log
+    unrecognized arguments, because the arguments are checked before the
+    configuration file is read. The only way to log such cases is to interpose
+    a script such as util/logargs.sh between the caller and Exim.
+
+  * connection_reject: A log entry is written whenever an incoming SMTP
+    connection is rejected, for whatever reason.
+
+  * delay_delivery: A log entry is written whenever a delivery process is not
+    started for an incoming message because the load is too high or too many
+    messages were received on one connection. Logging does not occur if no
+    delivery process is started because queue_only is set or -odq was used.
+
+  * deliver_time: For each delivery, the amount of real time it has taken to
+    perform the actual delivery is logged as DT=<time>, for example, "DT=1s".
+    If millisecond logging is enabled, short times will be shown with greater
+    precision, eg. "DT=0.304s".
+
+  * delivery_size: For each delivery, the size of message delivered is added to
+    the "=>" line, tagged with S=.
+
+  * dkim: For message acceptance log lines, when an DKIM signature in the
+    header verifies successfully a tag of DKIM is added, with one of the
+    verified domains.
+
+  * dkim_verbose: A log entry is written for each attempted DKIM verification.
+
+  * dnslist_defer: A log entry is written if an attempt to look up a host in a
+    DNS black list suffers a temporary error.
+
+  * dnssec: For message acceptance and (attempted) delivery log lines, when dns
+    lookups gave secure results a tag of DS is added. For acceptance this
+    covers the reverse and forward lookups for host name verification. It does
+    not cover helo-name verification. For delivery this covers the SRV, MX, A
+    and/or AAAA lookups.
+
+  * etrn: Every valid ETRN command that is received is logged, before the ACL
+    is run to determine whether or not it is actually accepted. An invalid ETRN
+    command, or one received within a message transaction is not logged by this
+    selector (see smtp_syntax_error and smtp_protocol_error).
+
+  * host_lookup_failed: When a lookup of a host's IP addresses fails to find
+    any addresses, or when a lookup of an IP address fails to find a host name,
+    a log line is written. This logging does not apply to direct DNS lookups
+    when routing email addresses, but it does apply to "byname" lookups.
+
+  * ident_timeout: A log line is written whenever an attempt to connect to a
+    client's ident port times out.
+
+  * incoming_interface: The interface on which a message was received is added
+    to the "<=" line as an IP address in square brackets, tagged by I= and
+    followed by a colon and the port number. The local interface and port are
+    also added to other SMTP log lines, for example, "SMTP connection from", to
+    rejection lines, and (despite the name) to outgoing "=>", "->", "==" and
+    "**" lines. The latter can be disabled by turning off the 
+    outgoing_interface option.
+
+  * proxy: The internal (closest to the system running Exim) IP address of the
+    proxy, tagged by PRX=, on the "<=" line for a message accepted on a proxied
+    connection or the "=>" line for a message delivered on a proxied
+    connection. See 59.1 for more information.
+
+  * incoming_port: The remote port number from which a message was received is
+    added to log entries and Received: header lines, following the IP address
+    in square brackets, and separated from it by a colon. This is implemented
+    by changing the value that is put in the $sender_fullhost and
+    $sender_rcvhost variables. Recording the remote port number has become more
+    important with the widening use of NAT (see RFC 2505).
+
+  * lost_incoming_connection: A log line is written when an incoming SMTP
+    connection is unexpectedly dropped.
+
+  * millisec: Timestamps have a period and three decimal places of finer
+    granularity appended to the seconds value.
+
+  * msg_id: The value of the Message-ID: header.
+
+  * msg_id_created: The value of the Message-ID: header, when one had to be
+    created. This will be either because the message is a bounce, or was
+    submitted locally (submission mode) without one. The field identifier will
+    have an asterix appended: "id*=".
+
+  * outgoing_interface: If incoming_interface is turned on, then the interface
+    on which a message was sent is added to delivery lines as an I= tag
+    followed by IP address in square brackets. You can disable this by turning
+    off the outgoing_interface option.
+
+  * outgoing_port: The remote port number is added to delivery log lines (those
+    containing => tags) following the IP address. The local port is also added
+    if incoming_interface and outgoing_interface are both enabled. This option
+    is not included in the default setting, because for most ordinary
+    configurations, the remote port number is always 25 (the SMTP port), and
+    the local port is a random ephemeral port.
+
+  * pid: The current process id is added to every log line, in square brackets,
+    immediately after the time and date.
+
+  * pipelining: A field is added to delivery and accept log lines when the
+    ESMTP PIPELINING extension was used. The field is a single "L".
+
+    On accept lines, where PIPELINING was offered but not used by the client,
+    the field has a minus appended.
+
+    If Exim is built without the DISABLE_PIPE_CONNECT build option accept "L"
+    fields have a period appended if the feature was offered but not used, or
+    an asterisk appended if used. Delivery "L" fields have an asterisk appended
+    if used.
+
+  * queue_run: The start and end of every queue run are logged.
+
+  * queue_time: The amount of time the message has been in the queue on the
+    local host is logged as QT=<time> on delivery ("=>") lines, for example,
+    "QT=3m45s". If millisecond logging is enabled, short times will be shown
+    with greater precision, eg. "QT=1.578s".
+
+  * queue_time_overall: The amount of time the message has been in the queue on
+    the local host is logged as QT=<time> on "Completed" lines, for example,
+    "QT=3m45s".
+
+  * receive_time: For each message, the amount of real time it has taken to
+    perform the reception is logged as RT=<time>, for example, "RT=1s". If
+    millisecond logging is enabled, short times will be shown with greater
+    precision, eg. "RT=0.204s".
+
+  * received_recipients: The recipients of a message are listed in the main log
+    as soon as the message is received. The list appears at the end of the log
+    line that is written when a message is received, preceded by the word
+    "for". The addresses are listed after they have been qualified, but before
+    any rewriting has taken place. Recipients that were discarded by an ACL for
+    MAIL or RCPT do not appear in the list.
+
+  * received_sender: The unrewritten original sender of a message is added to
+    the end of the log line that records the message's arrival, after the word
+    "from" (before the recipients if received_recipients is also set).
+
+  * rejected_header: If a message's header has been received at the time a
+    rejection is written to the reject log, the complete header is added to the
+    log. Header logging can be turned off individually for messages that are
+    rejected by the local_scan() function (see section 46.2).
+
+  * retry_defer: A log line is written if a delivery is deferred because a
+    retry time has not yet been reached. However, this "retry time not reached"
+    message is always omitted from individual message logs after the first
+    delivery attempt.
+
+  * return_path_on_delivery: The return path that is being transmitted with the
+    message is included in delivery and bounce lines, using the tag P=. This is
+    omitted if no delivery actually happens, for example, if routing fails, or
+    if delivery is to /dev/null or to ":blackhole:".
+
+  * sender_on_delivery: The message's sender address is added to every delivery
+    and bounce line, tagged by F= (for "from"). This is the original sender
+    that was received with the message; it is not necessarily the same as the
+    outgoing return path.
+
+  * sender_verify_fail: If this selector is unset, the separate log line that
+    gives details of a sender verification failure is not written. Log lines
+    for the rejection of SMTP commands contain just "sender verify failed", so
+    some detail is lost.
+
+  * size_reject: A log line is written whenever a message is rejected because
+    it is too big.
+
+  * skip_delivery: A log line is written whenever a message is skipped during a
+    queue run because it another process is already delivering it or because it
+    is frozen. The message that is written is either "spool file is locked" or
+    "message is frozen".
+
+  * smtp_confirmation: The response to the final "." in the SMTP or LMTP
+    dialogue for outgoing messages is added to delivery log lines in the form
+    "C="<text>. A number of MTAs (including Exim) return an identifying string
+    in this response.
+
+  * smtp_connection: A log line is written whenever an incoming SMTP connection
+    is established or closed, unless the connection is from a host that matches
+    hosts_connection_nolog. (In contrast, lost_incoming_connection applies only
+    when the closure is unexpected.) This applies to connections from local
+    processes that use -bs as well as to TCP/IP connections. If a connection is
+    dropped in the middle of a message, a log line is always written, whether
+    or not this selector is set, but otherwise nothing is written at the start
+    and end of connections unless this selector is enabled.
+
+    For TCP/IP connections to an Exim daemon, the current number of connections
+    is included in the log message for each new connection, but note that the
+    count is reset if the daemon is restarted. Also, because connections are
+    closed (and the closure is logged) in subprocesses, the count may not
+    include connections that have been closed but whose termination the daemon
+    has not yet noticed. Thus, while it is possible to match up the opening and
+    closing of connections in the log, the value of the logged counts may not
+    be entirely accurate.
+
+  * smtp_incomplete_transaction: When a mail transaction is aborted by RSET,
+    QUIT, loss of connection, or otherwise, the incident is logged, and the
+    message sender plus any accepted recipients are included in the log line.
+    This can provide evidence of dictionary attacks.
+
+  * smtp_no_mail: A line is written to the main log whenever an accepted SMTP
+    connection terminates without having issued a MAIL command. This includes
+    both the case when the connection is dropped, and the case when QUIT is
+    used. It does not include cases where the connection is rejected right at
+    the start (by an ACL, or because there are too many connections, or
+    whatever). These cases already have their own log lines.
+
+    The log line that is written contains the identity of the client in the
+    usual way, followed by D= and a time, which records the duration of the
+    connection. If the connection was authenticated, this fact is logged
+    exactly as it is for an incoming message, with an A= item. If the
+    connection was encrypted, CV=, DN=, and X= items may appear as they do for
+    an incoming message, controlled by the same logging options.
+
+    Finally, if any SMTP commands were issued during the connection, a C= item
+    is added to the line, listing the commands that were used. For example,
+
+    C=EHLO,QUIT
+
+    shows that the client issued QUIT straight after EHLO. If there were fewer
+    than 20 commands, they are all listed. If there were more than 20 commands,
+    the last 20 are listed, preceded by "...". However, with the default
+    setting of 10 for smtp_accept_max_nonmail, the connection will in any case
+    have been aborted before 20 non-mail commands are processed.
+
+  * smtp_mailauth: A third subfield with the authenticated sender,
+    colon-separated, is appended to the A= item for a message arrival or
+    delivery log line, if an AUTH argument to the SMTP MAIL command (see 33.2)
+    was accepted or used.
+
+  * smtp_protocol_error: A log line is written for every SMTP protocol error
+    encountered. Exim does not have perfect detection of all protocol errors
+    because of transmission delays and the use of pipelining. If PIPELINING has
+    been advertised to a client, an Exim server assumes that the client will
+    use it, and therefore it does not count "expected" errors (for example,
+    RCPT received after rejecting MAIL) as protocol errors.
+
+  * smtp_syntax_error: A log line is written for every SMTP syntax error
+    encountered. An unrecognized command is treated as a syntax error. For an
+    external connection, the host identity is given; for an internal connection
+    using -bs the sender identification (normally the calling user) is given.
+
+  * subject: The subject of the message is added to the arrival log line,
+    preceded by "T=" (T for "topic", since S is already used for "size"). Any
+    MIME "words" in the subject are decoded. The print_topbitchars option
+    specifies whether characters with values greater than 127 should be logged
+    unchanged, or whether they should be rendered as escape sequences.
+
+  * tls_certificate_verified: An extra item is added to <= and => log lines
+    when TLS is in use. The item is "CV=yes" if the peer's certificate was
+    verified using a CA trust anchor, "CV=dane" if using a DNS trust anchor,
+    and "CV=no" if not.
+
+  * tls_cipher: When a message is sent or received over an encrypted
+    connection, the cipher suite used is added to the log line, preceded by X=.
+
+  * tls_peerdn: When a message is sent or received over an encrypted
+    connection, and a certificate is supplied by the remote host, the peer DN
+    is added to the log line, preceded by DN=.
+
+  * tls_resumption: When a message is sent or received over an encrypted
+    connection and the TLS session resumed one used on a previous TCP
+    connection, an asterisk is appended to the X= cipher field in the log line.
+
+  * tls_sni: When a message is received over an encrypted connection, and the
+    remote host provided the Server Name Indication extension, the SNI is added
+    to the log line, preceded by SNI=.
+
+  * unknown_in_list: This setting causes a log entry to be written when the
+    result of a list match is failure because a DNS lookup failed.
+
+
+53.16 Message log
+-----------------
+
+In addition to the general log files, Exim writes a log file for each message
+that it handles. The names of these per-message logs are the message ids, and
+they are kept in the msglog sub-directory of the spool directory. Each message
+log contains copies of the log lines that apply to the message. This makes it
+easier to inspect the status of an individual message without having to search
+the main log. A message log is deleted when processing of the message is
+complete, unless preserve_message_logs is set, but this should be used only
+with great care because they can fill up your disk very quickly.
+
+On a heavily loaded system, it may be desirable to disable the use of
+per-message logs, in order to reduce disk I/O. This can be done by setting the 
+message_logs option false.
+
+
+
+===============================================================================
+54. EXIM UTILITIES
+
+A number of utility scripts and programs are supplied with Exim and are
+described in this chapter. There is also the Exim Monitor, which is covered in
+the next chapter. The utilities described here are:
+
+    54.1  exiwhat          list what Exim processes are doing
+    54.2  exiqgrep         grep the queue
+    54.3  exiqsumm         summarize the queue
+    54.4  exigrep          search the main log
+    54.5  exipick          select messages on various criteria
+    54.6  exicyclog        cycle (rotate) log files
+    54.7  eximstats        extract statistics from the log
+    54.8  exim_checkaccess check address acceptance from given IP
+    54.9  exim_dbmbuild    build a DBM file
+    54.10 exinext          extract retry information
+    54.12 exim_dumpdb      dump a hints database
+    54.13 exim_tidydb      clean up a hints database
+    54.14 exim_fixdb       patch a hints database
+    54.15 exim_lock        lock a mailbox file
+
+Another utility that might be of use to sites with many MTAs is Tom Kistner's 
+exilog. It provides log visualizations across multiple Exim servers. See https:
+//duncanthrax.net/exilog/ for details.
+
+
+54.1 Finding out what Exim processes are doing (exiwhat)
+--------------------------------------------------------
+
+On operating systems that can restart a system call after receiving a signal
+(most modern OS), an Exim process responds to the SIGUSR1 signal by writing a
+line describing what it is doing to the file exim-process.info in the Exim
+spool directory. The exiwhat script sends the signal to all Exim processes it
+can find, having first emptied the file. It then waits for one second to allow
+the Exim processes to react before displaying the results. In order to run 
+exiwhat successfully you have to have sufficient privilege to send the signal
+to the Exim processes, so it is normally run as root.
+
+Warning: This is not an efficient process. It is intended for occasional use by
+system administrators. It is not sensible, for example, to set up a script that
+sends SIGUSR1 signals to Exim processes at short intervals.
+
+Unfortunately, the ps command that exiwhat uses to find Exim processes varies
+in different operating systems. Not only are different options used, but the
+format of the output is different. For this reason, there are some system
+configuration options that configure exactly how exiwhat works. If it doesn't
+seem to be working for you, check the following compile-time options:
+
+    "EXIWHAT_PS_CMD"    the command for running ps
+    "EXIWHAT_PS_ARG"    the argument for ps
+    "EXIWHAT_EGREP_ARG" the argument for egrep to select from ps output
+    "EXIWHAT_KILL_ARG"  the argument for the kill command
+
+An example of typical output from exiwhat is
+
+164 daemon: -q1h, listening on port 25
+10483 running queue: waiting for 0tAycK-0002ij-00 (10492)
+10492 delivering 0tAycK-0002ij-00 to mail.ref.example
+  [10.19.42.42] (editor@ref.example)
+10592 handling incoming call from [192.168.243.242]
+10628 accepting a local non-SMTP message
+
+The first number in the output line is the process number. The third line has
+been split here, in order to fit it on the page.
+
+
+54.2 Selective queue listing (exiqgrep)
+---------------------------------------
+
+This utility is a Perl script contributed by Matt Hubbard. It runs
+
+exim -bpu
+
+or (in case -a switch is specified)
+
+exim -bp
+
+to obtain a queue listing, and then greps the output to select messages that
+match given criteria. The following selection options are available:
+
+-f <regex>
+
+    Match the sender address using a case-insensitive search. The field that is
+    tested is enclosed in angle brackets, so you can test for bounce messages
+    with
+
+    exiqgrep -f '^<>$'
+
+-r <regex>
+
+    Match a recipient address using a case-insensitive search. The field that
+    is tested is not enclosed in angle brackets.
+
+-s <regex>
+
+    Match against the size field.
+
+-y <seconds>
+
+    Match messages that are younger than the given time.
+
+-o <seconds>
+
+    Match messages that are older than the given time.
+
+-z
+
+    Match only frozen messages.
+
+-x
+
+    Match only non-frozen messages.
+
+-G <queuename>
+
+    Match only messages in the given queue. Without this, the default queue is
+    searched.
+
+The following options control the format of the output:
+
+-c
+
+    Display only the count of matching messages.
+
+-l
+
+    Long format - display the full message information as output by Exim. This
+    is the default.
+
+-i
+
+    Display message ids only.
+
+-b
+
+    Brief format - one line per message.
+
+-R
+
+    Display messages in reverse order.
+
+-a
+
+    Include delivered recipients in queue listing.
+
+The following options give alternates for configuration:
+
+-C <config file>
+
+    is used to specify an alternate exim.conf which might contain alternate
+    exim configuration the queue management might be using.
+
+-E <path>
+
+    can be used to specify a path for the exim binary, overriding the built-in
+    one.
+
+There is one more option, -h, which outputs a list of options.
+
+At least one selection option, or either the -c or -h option, must be given.
+
+
+54.3 Summarizing the queue (exiqsumm)
+-------------------------------------
+
+The exiqsumm utility is a Perl script which reads the output of "exim -bp" and
+produces a summary of the messages in the queue. Thus, you use it by running a
+command such as
+
+exim -bp | exiqsumm
+
+The output consists of one line for each domain that has messages waiting for
+it, as in the following example:
+
+3   2322   74m   66m  msn.com.example
+
+Each line lists the number of pending deliveries for a domain, their total
+volume, and the length of time that the oldest and the newest messages have
+been waiting. Note that the number of pending deliveries is greater than the
+number of messages when messages have more than one recipient.
+
+A summary line is output at the end. By default the output is sorted on the
+domain name, but exiqsumm has the options -a and -c, which cause the output to
+be sorted by oldest message and by count of messages, respectively. There are
+also three options that split the messages for each domain into two or more
+subcounts: -b separates bounce messages, -f separates frozen messages, and -s
+separates messages according to their sender.
+
+The output of exim -bp contains the original addresses in the message, so this
+also applies to the output from exiqsumm. No domains from addresses generated
+by aliasing or forwarding are included (unless the one_time option of the 
+redirect router has been used to convert them into "top level" addresses).
+
+
+54.4 Extracting specific information from the log (exigrep)
+-----------------------------------------------------------
+
+The exigrep utility is a Perl script that searches one or more main log files
+for entries that match a given pattern. When it finds a match, it extracts all
+the log entries for the relevant message, not just those that match the
+pattern. Thus, exigrep can extract complete log entries for a given message, or
+all mail for a given user, or for a given host, for example. The input files
+can be in Exim log format or syslog format. If a matching log line is not
+associated with a specific message, it is included in exigrep's output without
+any additional lines. The usage is:
+
+exigrep [-t<n>] [-I] [-l] [-M] [-v] <pattern> [<log file>] ...
+
+If no log filenames are given on the command line, the standard input is read.
+
+The -t argument specifies a number of seconds. It adds an additional condition
+for message selection. Messages that are complete are shown only if they spent
+more than <n> seconds in the queue.
+
+By default, exigrep does case-insensitive matching. The -I option makes it
+case-sensitive. This may give a performance improvement when searching large
+log files. Without -I, the Perl pattern matches use Perl's "/i" option; with -I
+they do not. In both cases it is possible to change the case sensitivity within
+the pattern by using "(?i)" or "(?-i)".
+
+The -l option means "literal", that is, treat all characters in the pattern as
+standing for themselves. Otherwise the pattern must be a Perl regular
+expression.
+
+The -v option inverts the matching condition. That is, a line is selected if it
+does not match the pattern.
+
+The -M options means "related messages". exigrep will show messages that are
+generated as a result/response to a message that exigrep matched normally.
+
+Example of -M: user_a sends a message to user_b, which generates a bounce back
+to user_b. If exigrep is used to search for "user_a", only the first message
+will be displayed. But if exigrep is used to search for "user_b", the first and
+the second (bounce) message will be displayed. Using -M with exigrep when
+searching for "user_a" will show both messages since the bounce is "related" to
+or a "result" of the first message that was found by the search term.
+
+If the location of a zcat command is known from the definition of ZCAT_COMMAND
+in Local/Makefile, exigrep automatically passes any file whose name ends in
+COMPRESS_SUFFIX through zcat as it searches it. If the ZCAT_COMMAND is not
+executable, exigrep tries to use autodetection of some well known compression
+extensions.
+
+
+54.5 Selecting messages by various criteria (exipick)
+-----------------------------------------------------
+
+John Jetmore's exipick utility is included in the Exim distribution. It lists
+messages from the queue according to a variety of criteria. For details of 
+exipick's facilities, run exipick with the --help option.
+
+
+54.6 Cycling log files (exicyclog)
+----------------------------------
+
+The exicyclog script can be used to cycle (rotate) mainlog and rejectlog files.
+This is not necessary if only syslog is being used, or if you are using log
+files with datestamps in their names (see section 53.3). Some operating systems
+have their own standard mechanisms for log cycling, and these can be used
+instead of exicyclog if preferred. There are two command line options for 
+exicyclog:
+
+  * -k <count> specifies the number of log files to keep, overriding the
+    default that is set when Exim is built. The default default is 10.
+
+  * -l <path> specifies the log file path, in the same format as Exim's 
+    log_file_path option (for example, "/var/log/exim_%slog"), again overriding
+    the script's default, which is to find the setting from Exim's
+    configuration.
+
+Each time exicyclog is run the filenames get "shuffled down" by one. If the
+main log filename is mainlog (the default) then when exicyclog is run mainlog
+becomes mainlog.01, the previous mainlog.01 becomes mainlog.02 and so on, up to
+the limit that is set in the script or by the -k option. Log files whose
+numbers exceed the limit are discarded. Reject logs are handled similarly.
+
+If the limit is greater than 99, the script uses 3-digit numbers such as
+mainlog.001, mainlog.002, etc. If you change from a number less than 99 to one
+that is greater, or vice versa, you will have to fix the names of any existing
+log files.
+
+If no mainlog file exists, the script does nothing. Files that "drop off" the
+end are deleted. All files with numbers greater than 01 are compressed, using a
+compression command which is configured by the COMPRESS_COMMAND setting in
+Local/Makefile. It is usual to run exicyclog daily from a root crontab entry of
+the form
+
+1 0 * * * su exim -c /usr/exim/bin/exicyclog
+
+assuming you have used the name "exim" for the Exim user. You can run exicyclog
+as root if you wish, but there is no need.
+
+
+54.7 Mail statistics (eximstats)
+--------------------------------
+
+A Perl script called eximstats is provided for extracting statistical
+information from log files. The output is either plain text, or HTML.
+
+The eximstats script has been hacked about quite a bit over time. The latest
+version is the result of some extensive revision by Steve Campbell. A lot of
+information is given by default, but there are options for suppressing various
+parts of it. Following any options, the arguments to the script are a list of
+files, which should be main log files. For example:
+
+eximstats -nr /var/spool/exim/log/mainlog.01
+
+By default, eximstats extracts information about the number and volume of
+messages received from or delivered to various hosts. The information is sorted
+both by message count and by volume, and the top fifty hosts in each category
+are listed on the standard output. Similar information, based on email
+addresses or domains instead of hosts can be requested by means of various
+options. For messages delivered and received locally, similar statistics are
+also produced per user.
+
+The output also includes total counts and statistics about delivery errors, and
+histograms showing the number of messages received and deliveries made in each
+hour of the day. A delivery with more than one address in its envelope (for
+example, an SMTP transaction with more than one RCPT command) is counted as a
+single delivery by eximstats.
+
+Though normally more deliveries than receipts are reported (as messages may
+have multiple recipients), it is possible for eximstats to report more messages
+received than delivered, even though the queue is empty at the start and end of
+the period in question. If an incoming message contains no valid recipients, no
+deliveries are recorded for it. A bounce message is handled as an entirely
+separate message.
+
+eximstats always outputs a grand total summary giving the volume and number of
+messages received and deliveries made, and the number of hosts involved in each
+case. It also outputs the number of messages that were delayed (that is, not
+completely delivered at the first attempt), and the number that had at least
+one address that failed.
+
+The remainder of the output is in sections that can be independently disabled
+or modified by various options. It consists of a summary of deliveries by
+transport, histograms of messages received and delivered per time interval
+(default per hour), information about the time messages spent in the queue, a
+list of relayed messages, lists of the top fifty sending hosts, local senders,
+destination hosts, and destination local users by count and by volume, and a
+list of delivery errors that occurred.
+
+The relay information lists messages that were actually relayed, that is, they
+came from a remote host and were directly delivered to some other remote host,
+without being processed (for example, for aliasing or forwarding) locally.
+
+There are quite a few options for eximstats to control exactly what it outputs.
+These are documented in the Perl script itself, and can be extracted by running
+the command perldoc on the script. For example:
+
+perldoc /usr/exim/bin/eximstats
+
+
+54.8 Checking access policy (exim_checkaccess)
+----------------------------------------------
+
+The -bh command line argument allows you to run a fake SMTP session with
+debugging output, in order to check what Exim is doing when it is applying
+policy controls to incoming SMTP mail. However, not everybody is sufficiently
+familiar with the SMTP protocol to be able to make full use of -bh, and
+sometimes you just want to answer the question "Does this address have access?"
+without bothering with any further details.
+
+The exim_checkaccess utility is a "packaged" version of -bh. It takes two
+arguments, an IP address and an email address:
+
+exim_checkaccess 10.9.8.7 A.User@a.domain.example
+
+The utility runs a call to Exim with the -bh option, to test whether the given
+email address would be accepted in a RCPT command in a TCP/IP connection from
+the host with the given IP address. The output of the utility is either the
+word "accepted", or the SMTP error response, for example:
+
+Rejected:
+550 Relay not permitted
+
+When running this test, the utility uses "<>" as the envelope sender address
+for the MAIL command, but you can change this by providing additional options.
+These are passed directly to the Exim command. For example, to specify that the
+test is to be run with the sender address himself@there.example you can use:
+
+exim_checkaccess 10.9.8.7 A.User@a.domain.example \
+                 -f himself@there.example
+
+Note that these additional Exim command line items must be given after the two
+mandatory arguments.
+
+Because the exim_checkaccess uses -bh, it does not perform callouts while
+running its checks. You can run checks that include callouts by using -bhc, but
+this is not yet available in a "packaged" form.
+
+
+54.9 Making DBM files (exim_dbmbuild)
+-------------------------------------
+
+The exim_dbmbuild program reads an input file containing keys and data in the
+format used by the lsearch lookup (see section 9.3). It writes a DBM file using
+the lower-cased alias names as keys and the remainder of the information as
+data. The lower-casing can be prevented by calling the program with the -nolc
+option.
+
+A terminating zero is included as part of the key string. This is expected by
+the dbm lookup type. However, if the option -nozero is given, exim_dbmbuild
+creates files without terminating zeroes in either the key strings or the data
+strings. The dbmnz lookup type can be used with such files.
+
+The program requires two arguments: the name of the input file (which can be a
+single hyphen to indicate the standard input), and the name of the output file.
+It creates the output under a temporary name, and then renames it if all went
+well.
+
+If the native DB interface is in use (USE_DB is set in a compile-time
+configuration file - this is common in free versions of Unix) the two filenames
+must be different, because in this mode the Berkeley DB functions create a
+single output file using exactly the name given. For example,
+
+exim_dbmbuild /etc/aliases /etc/aliases.db
+
+reads the system alias file and creates a DBM version of it in /etc/aliases.db.
+
+In systems that use the ndbm routines (mostly proprietary versions of Unix),
+two files are used, with the suffixes .dir and .pag. In this environment, the
+suffixes are added to the second argument of exim_dbmbuild, so it can be the
+same as the first. This is also the case when the Berkeley functions are used
+in compatibility mode (though this is not recommended), because in that case it
+adds a .db suffix to the filename.
+
+If a duplicate key is encountered, the program outputs a warning, and when it
+finishes, its return code is 1 rather than zero, unless the -noduperr option is
+used. By default, only the first of a set of duplicates is used - this makes it
+compatible with lsearch lookups. There is an option -lastdup which causes it to
+use the data for the last duplicate instead. There is also an option -nowarn,
+which stops it listing duplicate keys to stderr. For other errors, where it
+doesn't actually make a new file, the return code is 2.
+
+
+54.10 Finding individual retry times (exinext)
+----------------------------------------------
+
+A utility called exinext (mostly a Perl script) provides the ability to fish
+specific information out of the retry database. Given a mail domain (or a
+complete address), it looks up the hosts for that domain, and outputs any retry
+information for the hosts or for the domain. At present, the retry information
+is obtained by running exim_dumpdb (see below) and post-processing the output.
+For example:
+
+$ exinext piglet@milne.fict.example
+kanga.milne.example:192.168.8.1 error 146: Connection refused
+  first failed: 21-Feb-1996 14:57:34
+  last tried:   21-Feb-1996 14:57:34
+  next try at:  21-Feb-1996 15:02:34
+roo.milne.example:192.168.8.3 error 146: Connection refused
+  first failed: 20-Jan-1996 13:12:08
+  last tried:   21-Feb-1996 11:42:03
+  next try at:  21-Feb-1996 19:42:03
+  past final cutoff time
+
+You can also give exinext a local part, without a domain, and it will give any
+retry information for that local part in your default domain. A message id can
+be used to obtain retry information pertaining to a specific message. This
+exists only when an attempt to deliver a message to a remote host suffers a
+message-specific error (see section 49.2). exinext is not particularly
+efficient, but then it is not expected to be run very often.
+
+The exinext utility calls Exim to find out information such as the location of
+the spool directory. The utility has -C and -D options, which are passed on to
+the exim commands. The first specifies an alternate Exim configuration file,
+and the second sets macros for use within the configuration file. These
+features are mainly to help in testing, but might also be useful in
+environments where more than one configuration file is in use.
+
+
+54.11 Hints database maintenance
+--------------------------------
+
+Three utility programs are provided for maintaining the DBM files that Exim
+uses to contain its delivery hint information. Each program requires two
+arguments. The first specifies the name of Exim's spool directory, and the
+second is the name of the database it is to operate on. These are as follows:
+
+  * retry: the database of retry information
+
+  * wait-<transport name>: databases of information about messages waiting for
+    remote hosts
+
+  * callout: the callout cache
+
+  * ratelimit: the data for implementing the ratelimit ACL condition
+
+  * tls: TLS session resumption data
+
+  * misc: other hints data
+
+The misc database is used for
+
+  * Serializing ETRN runs (when smtp_etrn_serialize is set)
+
+  * Serializing delivery to a specific host (when serialize_hosts is set in an 
+    smtp transport)
+
+  * Limiting the concurrency of specific transports (when max_parallel is set
+    in a transport)
+
+
+54.12 exim_dumpdb
+-----------------
+
+The entire contents of a database are written to the standard output by the 
+exim_dumpdb program,
+
+taking as arguments the spool and database names. An option -z may be given to
+request times in UTC; otherwise times are in the local timezone. An option -k
+may be given to dump only the record keys.
+
+For example, to dump the retry database:
+
+exim_dumpdb /var/spool/exim retry
+
+For the retry database two lines of output are produced for each entry:
+
+T:mail.ref.example:192.168.242.242 146 77 Connection refused
+31-Oct-1995 12:00:12 02-Nov-1995 12:21:39 02-Nov-1995 20:21:39 *
+
+The first item on the first line is the key of the record. It starts with one
+of the letters R, or T, depending on whether it refers to a routing or
+transport retry. For a local delivery, the next part is the local address; for
+a remote delivery it is the name of the remote host, followed by its failing IP
+address (unless retry_include_ip_address is set false on the smtp transport).
+If the remote port is not the standard one (port 25), it is added to the IP
+address. Then there follows an error code, an additional error code, and a
+textual description of the error.
+
+The three times on the second line are the time of first failure, the time of
+the last delivery attempt, and the computed time for the next attempt. The line
+ends with an asterisk if the cutoff time for the last retry rule has been
+exceeded.
+
+Each output line from exim_dumpdb for the wait-xxx databases consists of a host
+name followed by a list of ids for messages that are or were waiting to be
+delivered to that host. If there are a very large number for any one host,
+continuation records, with a sequence number added to the host name, may be
+seen. The data in these records is often out of date, because a message may be
+routed to several alternative hosts, and Exim makes no effort to keep
+cross-references.
+
+
+54.13 exim_tidydb
+-----------------
+
+The exim_tidydb utility program is used to tidy up the contents of a hints
+database. If run with no options, it removes all records that are more than 30
+days old. The age is calculated from the date and time that the record was last
+updated. Note that, in the case of the retry database, it is not the time since
+the first delivery failure. Information about a host that has been down for
+more than 30 days will remain in the database, provided that the record is
+updated sufficiently often.
+
+The cutoff date can be altered by means of the -t option, which must be
+followed by a time. For example, to remove all records older than a week from
+the retry database:
+
+exim_tidydb -t 7d /var/spool/exim retry
+
+Both the wait-xxx and retry databases contain items that involve message ids.
+In the former these appear as data in records keyed by host - they were
+messages that were waiting for that host - and in the latter they are the keys
+for retry information for messages that have suffered certain types of error.
+When exim_tidydb is run, a check is made to ensure that message ids in database
+records are those of messages that are still on the queue. Message ids for
+messages that no longer exist are removed from wait-xxx records, and if this
+leaves any records empty, they are deleted. For the retry database, records
+whose keys are non-existent message ids are removed. The exim_tidydb utility
+outputs comments on the standard output whenever it removes information from
+the database.
+
+Certain records are automatically removed by Exim when they are no longer
+needed, but others are not. For example, if all the MX hosts for a domain are
+down, a retry record is created for each one. If the primary MX host comes back
+first, its record is removed when Exim successfully delivers to it, but the
+records for the others remain because Exim has not tried to use those hosts.
+
+It is important, therefore, to run exim_tidydb periodically on all the hints
+databases. You should do this at a quiet time of day, because it requires a
+database to be locked (and therefore inaccessible to Exim) while it does its
+work. Removing records from a DBM file does not normally make the file smaller,
+but all the common DBM libraries are able to re-use the space that is released.
+After an initial phase of increasing in size, the databases normally reach a
+point at which they no longer get any bigger, as long as they are regularly
+tidied.
+
+Warning: If you never run exim_tidydb, the space used by the hints databases is
+likely to keep on increasing.
+
+
+54.14 exim_fixdb
+----------------
+
+The exim_fixdb program is a utility for interactively modifying databases. Its
+main use is for testing Exim, but it might also be occasionally useful for
+getting round problems in a live system. Its interface is somewhat crude. On
+entry, it prompts for input with a right angle-bracket. A key of a database
+record can then be entered, and the data for that record is displayed.
+
+If "d" is typed at the next prompt, the entire record is deleted. For all
+except the retry database, that is the only operation that can be carried out.
+For the retry database, each field is output preceded by a number, and data for
+individual fields can be changed by typing the field number followed by new
+data, for example:
+
+> 4 951102:1000
+
+resets the time of the next delivery attempt. Time values are given as a
+sequence of digit pairs for year, month, day, hour, and minute. Colons can be
+used as optional separators.
+
+Both displayed and input times are in the local timezone by default. If an
+option -z is used on the command line, displayed times are in UTC.
+
+
+54.15 Mailbox maintenance (exim_lock)
+-------------------------------------
+
+The exim_lock utility locks a mailbox file using the same algorithm as Exim.
+For a discussion of locking issues, see section 26.3. Exim_lock can be used to
+prevent any modification of a mailbox by Exim or a user agent while
+investigating a problem. The utility requires the name of the file as its first
+argument. If the locking is successful, the second argument is run as a command
+(using C's system() function); if there is no second argument, the value of the
+SHELL environment variable is used; if this is unset or empty, /bin/sh is run.
+When the command finishes, the mailbox is unlocked and the utility ends. The
+following options are available:
+
+-fcntl
+
+    Use fcntl() locking on the open mailbox.
+
+-flock
+
+    Use flock() locking on the open mailbox, provided the operating system
+    supports it.
+
+-interval
+
+    This must be followed by a number, which is a number of seconds; it sets
+    the interval to sleep between retries (default 3).
+
+-lockfile
+
+    Create a lock file before opening the mailbox.
+
+-mbx
+
+    Lock the mailbox using MBX rules.
+
+-q
+
+    Suppress verification output.
+
+-retries
+
+    This must be followed by a number; it sets the number of times to try to
+    get the lock (default 10).
+
+-restore_time
+
+    This option causes exim_lock to restore the modified and read times to the
+    locked file before exiting. This allows you to access a locked mailbox (for
+    example, to take a backup copy) without disturbing the times that the user
+    subsequently sees.
+
+-timeout
+
+    This must be followed by a number, which is a number of seconds; it sets a
+    timeout to be used with a blocking fcntl() lock. If it is not set (the
+    default), a non-blocking call is used.
+
+-v
+
+    Generate verbose output.
+
+If none of -fcntl, -flock, -lockfile or -mbx are given, the default is to
+create a lock file and also to use fcntl() locking on the mailbox, which is the
+same as Exim's default. The use of -flock or -fcntl requires that the file be
+writeable; the use of -lockfile requires that the directory containing the file
+be writeable. Locking by lock file does not last forever; Exim assumes that a
+lock file is expired if it is more than 30 minutes old.
+
+The -mbx option can be used with either or both of -fcntl or -flock. It assumes
+-fcntl by default. MBX locking causes a shared lock to be taken out on the open
+mailbox, and an exclusive lock on the file /tmp/.n.m where n and m are the
+device number and inode number of the mailbox file. When the locking is
+released, if an exclusive lock can be obtained for the mailbox, the file in /
+tmp is deleted.
+
+The default output contains verification of the locking that takes place. The 
+-v option causes some additional information to be given. The -q option
+suppresses all output except error messages.
+
+A command such as
+
+exim_lock /var/spool/mail/spqr
+
+runs an interactive shell while the file is locked, whereas
+
+exim_lock -q /var/spool/mail/spqr <<End
+<some commands>
+End
+
+runs a specific non-interactive sequence of commands while the file is locked,
+suppressing all verification output. A single command can be run by a command
+such as
+
+exim_lock -q /var/spool/mail/spqr \
+  "cp /var/spool/mail/spqr /some/where"
+
+Note that if a command is supplied, it must be entirely contained within the
+second argument - hence the quotes.
+
+
+
+===============================================================================
+55. THE EXIM MONITOR
+
+The Exim monitor is an application which displays in an X window information
+about the state of Exim's queue and what Exim is doing. An admin user can
+perform certain operations on messages from this GUI interface; however all
+such facilities are also available from the command line, and indeed, the
+monitor itself makes use of the command line to perform any actions requested.
+
+
+55.1 Running the monitor
+------------------------
+
+The monitor is started by running the script called eximon. This is a shell
+script that sets up a number of environment variables, and then runs the binary
+called eximon.bin. The default appearance of the monitor window can be changed
+by editing the Local/eximon.conf file created by editing exim_monitor/EDITME.
+Comments in that file describe what the various parameters are for.
+
+The parameters that get built into the eximon script can be overridden for a
+particular invocation by setting up environment variables of the same names,
+preceded by "EXIMON_". For example, a shell command such as
+
+EXIMON_LOG_DEPTH=400 eximon
+
+(in a Bourne-compatible shell) runs eximon with an overriding setting of the
+LOG_DEPTH parameter. If EXIMON_LOG_FILE_PATH is set in the environment, it
+overrides the Exim log file configuration. This makes it possible to have 
+eximon tailing log data that is written to syslog, provided that MAIL.INFO
+syslog messages are routed to a file on the local host.
+
+X resources can be used to change the appearance of the window in the normal
+way. For example, a resource setting of the form
+
+Eximon*background: gray94
+
+changes the colour of the background to light grey rather than white. The
+stripcharts are drawn with both the data lines and the reference lines in
+black. This means that the reference lines are not visible when on top of the
+data. However, their colour can be changed by setting a resource called
+"highlight" (an odd name, but that's what the Athena stripchart widget uses).
+For example, if your X server is running Unix, you could set up lighter
+reference lines in the stripcharts by obeying
+
+xrdb -merge <<End
+Eximon*highlight: gray
+End
+
+In order to see the contents of messages in the queue, and to operate on them, 
+eximon must either be run as root or by an admin user.
+
+The command-line parameters of eximon are passed to eximon.bin and may contain
+X11 resource parameters interpreted by the X11 library. In addition, if the
+first parameter starts with the string "gdb" then it is removed and the binary
+is invoked under gdb (the parameter is used as the gdb command-name, so
+versioned variants of gdb can be invoked).
+
+The monitor's window is divided into three parts. The first contains one or
+more stripcharts and two action buttons, the second contains a "tail" of the
+main log file, and the third is a display of the queue of messages awaiting
+delivery, with two more action buttons. The following sections describe these
+different parts of the display.
+
+
+55.2 The stripcharts
+--------------------
+
+The first stripchart is always a count of messages in the queue. Its name can
+be configured by setting QUEUE_STRIPCHART_NAME in the Local/eximon.conf file.
+The remaining stripcharts are defined in the configuration script by regular
+expression matches on log file entries, making it possible to display, for
+example, counts of messages delivered to certain hosts or using certain
+transports. The supplied defaults display counts of received and delivered
+messages, and of local and SMTP deliveries. The default period between
+stripchart updates is one minute; this can be adjusted by a parameter in the
+Local/eximon.conf file.
+
+The stripchart displays rescale themselves automatically as the value they are
+displaying changes. There are always 10 horizontal lines in each chart; the
+title string indicates the value of each division when it is greater than one.
+For example, "x2" means that each division represents a value of 2.
+
+It is also possible to have a stripchart which shows the percentage fullness of
+a particular disk partition, which is useful when local deliveries are confined
+to a single partition.
+
+This relies on the availability of the statvfs() function or equivalent in the
+operating system. Most, but not all versions of Unix that support Exim have
+this. For this particular stripchart, the top of the chart always represents
+100%, and the scale is given as "x10%". This chart is configured by setting
+SIZE_STRIPCHART and (optionally) SIZE_STRIPCHART_NAME in the Local/eximon.conf
+file.
+
+
+55.3 Main action buttons
+------------------------
+
+Below the stripcharts there is an action button for quitting the monitor. Next
+to this is another button marked "Size". They are placed here so that shrinking
+the window to its default minimum size leaves just the queue count stripchart
+and these two buttons visible. Pressing the "Size" button causes the window to
+expand to its maximum size, unless it is already at the maximum, in which case
+it is reduced to its minimum.
+
+When expanding to the maximum, if the window cannot be fully seen where it
+currently is, it is moved back to where it was the last time it was at full
+size. When it is expanding from its minimum size, the old position is
+remembered, and next time it is reduced to the minimum it is moved back there.
+
+The idea is that you can keep a reduced window just showing one or two
+stripcharts at a convenient place on your screen, easily expand it to show the
+full window when required, and just as easily put it back to what it was. The
+idea is copied from what the twm window manager does for its f.fullzoom action.
+The minimum size of the window can be changed by setting the MIN_HEIGHT and
+MIN_WIDTH values in Local/eximon.conf.
+
+Normally, the monitor starts up with the window at its full size, but it can be
+built so that it starts up with the window at its smallest size, by setting
+START_SMALL=yes in Local/eximon.conf.
+
+
+55.4 The log display
+--------------------
+
+The second section of the window is an area in which a display of the tail of
+the main log is maintained. To save space on the screen, the timestamp on each
+log line is shortened by removing the date and, if log_timezone is set, the
+timezone. The log tail is not available when the only destination for logging
+data is syslog, unless the syslog lines are routed to a local file whose name
+is passed to eximon via the EXIMON_LOG_FILE_PATH environment variable.
+
+The log sub-window has a scroll bar at its lefthand side which can be used to
+move back to look at earlier text, and the up and down arrow keys also have a
+scrolling effect. The amount of log that is kept depends on the setting of
+LOG_BUFFER in Local/eximon.conf, which specifies the amount of memory to use.
+When this is full, the earlier 50% of data is discarded - this is much more
+efficient than throwing it away line by line. The sub-window also has a
+horizontal scroll bar for accessing the ends of long log lines. This is the
+only means of horizontal scrolling; the right and left arrow keys are not
+available. Text can be cut from this part of the window using the mouse in the
+normal way. The size of this subwindow is controlled by parameters in the
+configuration file Local/eximon.conf.
+
+Searches of the text in the log window can be carried out by means of the ^R
+and ^S keystrokes, which default to a reverse and a forward search,
+respectively. The search covers only the text that is displayed in the window.
+It cannot go further back up the log.
+
+The point from which the search starts is indicated by a caret marker. This is
+normally at the end of the text in the window, but can be positioned explicitly
+by pointing and clicking with the left mouse button, and is moved automatically
+by a successful search. If new text arrives in the window when it is scrolled
+back, the caret remains where it is, but if the window is not scrolled back,
+the caret is moved to the end of the new text.
+
+Pressing ^R or ^S pops up a window into which the search text can be typed.
+There are buttons for selecting forward or reverse searching, for carrying out
+the search, and for cancelling. If the "Search" button is pressed, the search
+happens and the window remains so that further searches can be done. If the
+"Return" key is pressed, a single search is done and the window is closed. If ^
+C is typed the search is cancelled.
+
+The searching facility is implemented using the facilities of the Athena text
+widget. By default this pops up a window containing both "search" and "replace"
+options. In order to suppress the unwanted "replace" portion for eximon, a
+modified version of the TextPop widget is distributed with Exim. However, the
+linkers in BSDI and HP-UX seem unable to handle an externally provided version
+of TextPop when the remaining parts of the text widget come from the standard
+libraries. The compile-time option EXIMON_TEXTPOP can be unset to cut out the
+modified TextPop, making it possible to build Eximon on these systems, at the
+expense of having unwanted items in the search popup window.
+
+
+55.5 The queue display
+----------------------
+
+The bottom section of the monitor window contains a list of all messages that
+are in the queue, which includes those currently being received or delivered,
+as well as those awaiting delivery. The size of this subwindow is controlled by
+parameters in the configuration file Local/eximon.conf, and the frequency at
+which it is updated is controlled by another parameter in the same file - the
+default is 5 minutes, since queue scans can be quite expensive. However, there
+is an "Update" action button just above the display which can be used to force
+an update of the queue display at any time.
+
+When a host is down for some time, a lot of pending mail can build up for it,
+and this can make it hard to deal with other messages in the queue. To help
+with this situation there is a button next to "Update" called "Hide". If
+pressed, a dialogue box called "Hide addresses ending with" is put up. If you
+type anything in here and press "Return", the text is added to a chain of such
+texts, and if every undelivered address in a message matches at least one of
+the texts, the message is not displayed.
+
+If there is an address that does not match any of the texts, all the addresses
+are displayed as normal. The matching happens on the ends of addresses so, for
+example, cam.ac.uk specifies all addresses in Cambridge, while 
+xxx@foo.com.example specifies just one specific address. When any hiding has
+been set up, a button called "Unhide" is displayed. If pressed, it cancels all
+hiding. Also, to ensure that hidden messages do not get forgotten, a hide
+request is automatically cancelled after one hour.
+
+While the dialogue box is displayed, you can't press any buttons or do anything
+else to the monitor window. For this reason, if you want to cut text from the
+queue display to use in the dialogue box, you have to do the cutting before
+pressing the "Hide" button.
+
+The queue display contains, for each unhidden queued message, the length of
+time it has been in the queue, the size of the message, the message id, the
+message sender, and the first undelivered recipient, all on one line. If it is
+a bounce message, the sender is shown as "<>". If there is more than one
+recipient to which the message has not yet been delivered, subsequent ones are
+listed on additional lines, up to a maximum configured number, following which
+an ellipsis is displayed. Recipients that have already received the message are
+not shown.
+
+If a message is frozen, an asterisk is displayed at the left-hand side.
+
+The queue display has a vertical scroll bar, and can also be scrolled by means
+of the arrow keys. Text can be cut from it using the mouse in the normal way.
+The text searching facilities, as described above for the log window, are also
+available, but the caret is always moved to the end of the text when the queue
+display is updated.
+
+
+55.6 The queue menu
+-------------------
+
+If the shift key is held down and the left button is clicked when the mouse
+pointer is over the text for any message, an action menu pops up, and the first
+line of the queue display for the message is highlighted. This does not affect
+any selected text.
+
+If you want to use some other event for popping up the menu, you can set the
+MENU_EVENT parameter in Local/eximon.conf to change the default, or set
+EXIMON_MENU_EVENT in the environment before starting the monitor. The value set
+in this parameter is a standard X event description. For example, to run eximon
+using ctrl rather than shift you could use
+
+EXIMON_MENU_EVENT='Ctrl<Btn1Down>' eximon
+
+The title of the menu is the message id, and it contains entries which act as
+follows:
+
+  * message log: The contents of the message log for the message are displayed
+    in a new text window.
+
+  * headers: Information from the spool file that contains the envelope
+    information and headers is displayed in a new text window. See chapter 57
+    for a description of the format of spool files.
+
+  * body: The contents of the spool file containing the body of the message are
+    displayed in a new text window. There is a default limit of 20,000 bytes to
+    the amount of data displayed. This can be changed by setting the BODY_MAX
+    option at compile time, or the EXIMON_BODY_MAX option at runtime.
+
+  * deliver message: A call to Exim is made using the -M option to request
+    delivery of the message. This causes an automatic thaw if the message is
+    frozen. The -v option is also set, and the output from Exim is displayed in
+    a new text window. The delivery is run in a separate process, to avoid
+    holding up the monitor while the delivery proceeds.
+
+  * freeze message: A call to Exim is made using the -Mf option to request that
+    the message be frozen.
+
+  * thaw message: A call to Exim is made using the -Mt option to request that
+    the message be thawed.
+
+  * give up on msg: A call to Exim is made using the -Mg option to request that
+    Exim gives up trying to deliver the message. A bounce message is generated
+    for any remaining undelivered addresses.
+
+  * remove message: A call to Exim is made using the -Mrm option to request
+    that the message be deleted from the system without generating a bounce
+    message.
+
+  * add recipient: A dialog box is displayed into which a recipient address can
+    be typed. If the address is not qualified and the QUALIFY_DOMAIN parameter
+    is set in Local/eximon.conf, the address is qualified with that domain.
+    Otherwise it must be entered as a fully qualified address. Pressing RETURN
+    causes a call to Exim to be made using the -Mar option to request that an
+    additional recipient be added to the message, unless the entry box is
+    empty, in which case no action is taken.
+
+  * mark delivered: A dialog box is displayed into which a recipient address
+    can be typed. If the address is not qualified and the QUALIFY_DOMAIN
+    parameter is set in Local/eximon.conf, the address is qualified with that
+    domain. Otherwise it must be entered as a fully qualified address. Pressing
+    RETURN causes a call to Exim to be made using the -Mmd option to mark the
+    given recipient address as already delivered, unless the entry box is
+    empty, in which case no action is taken.
+
+  * mark all delivered: A call to Exim is made using the -Mmad option to mark
+    all recipient addresses as already delivered.
+
+  * edit sender: A dialog box is displayed initialized with the current
+    sender's address. Pressing RETURN causes a call to Exim to be made using
+    the -Mes option to replace the sender address, unless the entry box is
+    empty, in which case no action is taken. If you want to set an empty sender
+    (as in bounce messages), you must specify it as "<>". Otherwise, if the
+    address is not qualified and the QUALIFY_DOMAIN parameter is set in Local/
+    eximon.conf, the address is qualified with that domain.
+
+When a delivery is forced, a window showing the -v output is displayed. In
+other cases when a call to Exim is made, if there is any output from Exim (in
+particular, if the command fails) a window containing the command and the
+output is displayed. Otherwise, the results of the action are normally apparent
+from the log and queue displays. However, if you set ACTION_OUTPUT=yes in Local
+/eximon.conf, a window showing the Exim command is always opened, even if no
+output is generated.
+
+The queue display is automatically updated for actions such as freezing and
+thawing, unless ACTION_QUEUE_UPDATE=no has been set in Local/eximon.conf. In
+this case the "Update" button has to be used to force an update of the display
+after one of these actions.
+
+In any text window that is displayed as result of a menu action, the normal
+cut-and-paste facility is available, and searching can be carried out using ^R
+and ^S, as described above for the log tail window.
+
+
+
+===============================================================================
+56. SECURITY CONSIDERATIONS
+
+This chapter discusses a number of issues concerned with security, some of
+which are also covered in other parts of this manual.
+
+For reasons that this author does not understand, some people have promoted
+Exim as a "particularly secure" mailer. Perhaps it is because of the existence
+of this chapter in the documentation. However, the intent of the chapter is
+simply to describe the way Exim works in relation to certain security concerns,
+not to make any specific claims about the effectiveness of its security as
+compared with other MTAs.
+
+What follows is a description of the way Exim is supposed to be. Best efforts
+have been made to try to ensure that the code agrees with the theory, but an
+absence of bugs can never be guaranteed. Any that are reported will get fixed
+as soon as possible.
+
+
+56.1 Building a more "hardened" Exim
+------------------------------------
+
+There are a number of build-time options that can be set in Local/Makefile to
+create Exim binaries that are "harder" to attack, in particular by a rogue Exim
+administrator who does not have the root password, or by someone who has
+penetrated the Exim (but not the root) account. These options are as follows:
+
+  * ALT_CONFIG_PREFIX can be set to a string that is required to match the
+    start of any filenames used with the -C option. When it is set, these
+    filenames are also not allowed to contain the sequence "/../". (However, if
+    the value of the -C option is identical to the value of CONFIGURE_FILE in
+    Local/Makefile, Exim ignores -C and proceeds as usual.) There is no default
+    setting for ALT_CONFIG_PREFIX.
+
+    If the permitted configuration files are confined to a directory to which
+    only root has access, this guards against someone who has broken into the
+    Exim account from running a privileged Exim with an arbitrary configuration
+    file, and using it to break into other accounts.
+
+  * If a non-trusted configuration file (i.e. not the default configuration
+    file or one which is trusted by virtue of being listed in the
+    TRUSTED_CONFIG_LIST file) is specified with -C, or if macros are given with
+    -D (but see the next item), then root privilege is retained only if the
+    caller of Exim is root. This locks out the possibility of testing a
+    configuration using -C right through message reception and delivery, even
+    if the caller is root. The reception works, but by that time, Exim is
+    running as the Exim user, so when it re-execs to regain privilege for the
+    delivery, the use of -C causes privilege to be lost. However, root can test
+    reception and delivery using two separate commands.
+
+  * The WHITELIST_D_MACROS build option declares some macros to be safe to
+    override with -D if the real uid is one of root, the Exim run-time user or
+    the CONFIGURE_OWNER, if defined. The potential impact of this option is
+    limited by requiring the run-time value supplied to -D to match a regex
+    that errs on the restrictive side. Requiring build-time selection of safe
+    macros is onerous but this option is intended solely as a transition
+    mechanism to permit previously-working configurations to continue to work
+    after release 4.73.
+
+  * If DISABLE_D_OPTION is defined, the use of the -D command line option is
+    disabled.
+
+  * FIXED_NEVER_USERS can be set to a colon-separated list of users that are
+    never to be used for any deliveries. This is like the never_users runtime
+    option, but it cannot be overridden; the runtime option adds additional
+    users to the list. The default setting is "root"; this prevents a non-root
+    user who is permitted to modify the runtime file from using Exim as a way
+    to get root.
+
+
+56.2 Root privilege
+-------------------
+
+The Exim binary is normally setuid to root, which means that it gains root
+privilege (runs as root) when it starts execution. In some special cases (for
+example, when the daemon is not in use and there are no local deliveries), it
+may be possible to run Exim setuid to some user other than root. This is
+discussed in the next section. However, in most installations, root privilege
+is required for two things:
+
+  * To set up a socket connected to the standard SMTP port (25) when
+    initialising the listening daemon. If Exim is run from inetd, this
+    privileged action is not required.
+
+  * To be able to change uid and gid in order to read users' .forward files and
+    perform local deliveries as the receiving user or as specified in the
+    configuration.
+
+It is not necessary to be root to do any of the other things Exim does, such as
+receiving messages and delivering them externally over SMTP, and it is
+obviously more secure if Exim does not run as root except when necessary. For
+this reason, a user and group for Exim to use must be defined in Local/Makefile
+. These are known as "the Exim user" and "the Exim group". Their values can be
+changed by the runtime configuration, though this is not recommended. Often a
+user called exim is used, but some sites use mail or another user name
+altogether.
+
+Exim uses setuid() whenever it gives up root privilege. This is a permanent
+abdication; the process cannot regain root afterwards. Prior to release 4.00,
+seteuid() was used in some circumstances, but this is no longer the case.
+
+After a new Exim process has interpreted its command line options, it changes
+uid and gid in the following cases:
+
+  * If the -C option is used to specify an alternate configuration file, or if
+    the -D option is used to define macro values for the configuration, and the
+    calling process is not running as root, the uid and gid are changed to
+    those of the calling process. However, if DISABLE_D_OPTION is defined in
+    Local/Makefile, the -D option may not be used at all. If WHITELIST_D_MACROS
+    is defined in Local/Makefile, then some macro values can be supplied if the
+    calling process is running as root, the Exim run-time user or
+    CONFIGURE_OWNER, if defined.
+
+  * If the expansion test option (-be) or one of the filter testing options (
+    -bf or -bF) are used, the uid and gid are changed to those of the calling
+    process.
+
+  * If the process is not a daemon process or a queue runner process or a
+    delivery process or a process for testing address routing (started with -bt
+    ), the uid and gid are changed to the Exim user and group. This means that
+    Exim always runs under its own uid and gid when receiving messages. This
+    also applies when testing address verification (the -bv option) and testing
+    incoming message policy controls (the -bh option).
+
+  * For a daemon, queue runner, delivery, or address testing process, the uid
+    remains as root at this stage, but the gid is changed to the Exim group.
+
+The processes that initially retain root privilege behave as follows:
+
+  * A daemon process changes the gid to the Exim group and the uid to the Exim
+    user after setting up one or more listening sockets. The initgroups()
+    function is called, so that if the Exim user is in any additional groups,
+    they will be used during message reception.
+
+  * A queue runner process retains root privilege throughout its execution. Its
+    job is to fork a controlled sequence of delivery processes.
+
+  * A delivery process retains root privilege throughout most of its execution,
+    but any actual deliveries (that is, the transports themselves) are run in
+    subprocesses which always change to a non-root uid and gid. For local
+    deliveries this is typically the uid and gid of the owner of the mailbox;
+    for remote deliveries, the Exim uid and gid are used. Once all the delivery
+    subprocesses have been run, a delivery process changes to the Exim uid and
+    gid while doing post-delivery tidying up such as updating the retry
+    database and generating bounce and warning messages.
+
+    While the recipient addresses in a message are being routed, the delivery
+    process runs as root. However, if a user's filter file has to be processed,
+    this is done in a subprocess that runs under the individual user's uid and
+    gid. A system filter is run as root unless system_filter_user is set.
+
+  * A process that is testing addresses (the -bt option) runs as root so that
+    the routing is done in the same environment as a message delivery.
+
+
+56.3 Running Exim without privilege
+-----------------------------------
+
+Some installations like to run Exim in an unprivileged state for more of its
+operation, for added security. Support for this mode of operation is provided
+by the global option deliver_drop_privilege. When this is set, the uid and gid
+are changed to the Exim user and group at the start of a delivery process (and
+also queue runner and address testing processes). This means that address
+routing is no longer run as root, and the deliveries themselves cannot change
+to any other uid.
+
+Leaving the binary setuid to root, but setting deliver_drop_privilege means
+that the daemon can still be started in the usual way, and it can respond
+correctly to SIGHUP because the re-invocation regains root privilege.
+
+An alternative approach is to make Exim setuid to the Exim user and also setgid
+to the Exim group. If you do this, the daemon must be started from a root
+process. (Calling Exim from a root process makes it behave in the way it does
+when it is setuid root.) However, the daemon cannot restart itself after a
+SIGHUP signal because it cannot regain privilege.
+
+It is still useful to set deliver_drop_privilege in this case, because it stops
+Exim from trying to re-invoke itself to do a delivery after a message has been
+received. Such a re-invocation is a waste of resources because it has no
+effect.
+
+If restarting the daemon is not an issue (for example, if mua_wrapper is set,
+or inetd is being used instead of a daemon), having the binary setuid to the
+Exim user seems a clean approach, but there is one complication:
+
+In this style of operation, Exim is running with the real uid and gid set to
+those of the calling process, and the effective uid/gid set to Exim's values.
+Ideally, any association with the calling process' uid/gid should be dropped,
+that is, the real uid/gid should be reset to the effective values so as to
+discard any privileges that the caller may have. While some operating systems
+have a function that permits this action for a non-root effective uid, quite a
+number of them do not. Because of this lack of standardization, Exim does not
+address this problem at this time.
+
+For this reason, the recommended approach for "mostly unprivileged" running is
+to keep the Exim binary setuid to root, and to set deliver_drop_privilege. This
+also has the advantage of allowing a daemon to be used in the most
+straightforward way.
+
+If you configure Exim not to run delivery processes as root, there are a number
+of restrictions on what you can do:
+
+  * You can deliver only as the Exim user/group. You should explicitly use the 
+    user and group options to override routers or local transports that
+    normally deliver as the recipient. This makes sure that configurations that
+    work in this mode function the same way in normal mode. Any implicit or
+    explicit specification of another user causes an error.
+
+  * Use of .forward files is severely restricted, such that it is usually not
+    worthwhile to include them in the configuration.
+
+  * Users who wish to use .forward would have to make their home directory and
+    the file itself accessible to the Exim user. Pipe and append-to-file
+    entries, and their equivalents in Exim filters, cannot be used. While they
+    could be enabled in the Exim user's name, that would be insecure and not
+    very useful.
+
+  * Unless the local user mailboxes are all owned by the Exim user (possible in
+    some POP3 or IMAP-only environments):
+
+     1. They must be owned by the Exim group and be writeable by that group.
+        This implies you must set mode in the appendfile configuration, as well
+        as the mode of the mailbox files themselves.
+
+     2. You must set no_check_owner, since most or all of the files will not be
+        owned by the Exim user.
+
+     3. You must set file_must_exist, because Exim cannot set the owner
+        correctly on a newly created mailbox when unprivileged. This also
+        implies that new mailboxes need to be created manually.
+
+These restrictions severely restrict what can be done in local deliveries.
+However, there are no restrictions on remote deliveries. If you are running a
+gateway host that does no local deliveries, setting deliver_drop_privilege
+gives more security at essentially no cost.
+
+If you are using the mua_wrapper facility (see chapter 52), 
+deliver_drop_privilege is forced to be true.
+
+
+56.4 Delivering to local files
+------------------------------
+
+Full details of the checks applied by appendfile before it writes to a file are
+given in chapter 26.
+
+
+56.5 Running local commands
+---------------------------
+
+There are a number of ways in which an administrator can configure Exim to run
+commands based upon received, untrustworthy, data. Further, in some
+configurations a user who can control a .forward file can also arrange to run
+commands. Configuration to check includes, but is not limited to:
+
+  * Use of use_shell in the pipe transport: various forms of shell command
+    injection may be possible with this option present. It is dangerous and
+    should be used only with considerable caution. Consider constraints which
+    whitelist allowed characters in a variable which is to be used in a pipe
+    transport that has use_shell enabled.
+
+  * A number of options such as forbid_filter_run, forbid_filter_perl, 
+    forbid_filter_dlfunc and so forth which restrict facilities available to
+    .forward files in a redirect router. If Exim is running on a central mail
+    hub to which ordinary users do not have shell access, but home directories
+    are NFS mounted (for instance) then administrators should review the list
+    of these forbid options available, and should bear in mind that the options
+    that may need forbidding can change as new features are added between
+    releases.
+
+  * The ${run...} expansion item does not use a shell by default, but
+    administrators can configure use of /bin/sh as part of the command. Such
+    invocations should be viewed with prejudicial suspicion.
+
+  * Administrators who use embedded Perl are advised to explore how Perl's
+    taint checking might apply to their usage.
+
+  * Use of ${expand...} is somewhat analogous to shell's eval builtin and
+    administrators are well advised to view its use with suspicion, in case
+    (for instance) it allows a local-part to contain embedded Exim directives.
+
+  * Use of ${match_local_part...} and friends becomes more dangerous if Exim
+    was built with EXPAND_LISTMATCH_RHS defined: the second string in each can
+    reference arbitrary lists and files, rather than just being a list of
+    opaque strings. The EXPAND_LISTMATCH_RHS option was added and set false by
+    default because of real-world security vulnerabilities caused by its use
+    with untrustworthy data injected in, for SQL injection attacks. Consider
+    the use of the inlisti expansion condition instead.
+
+
+56.6 Trust in configuration data
+--------------------------------
+
+If configuration data for Exim can come from untrustworthy sources, there are
+some issues to be aware of:
+
+  * Use of ${expand...} may provide a path for shell injection attacks.
+
+  * Letting untrusted data provide a regular expression is unwise.
+
+  * Using ${match...} to apply a fixed regular expression against untrusted
+    data may result in pathological behaviour within PCRE2. Be aware of what
+    "backtracking" means and consider options for being more strict with a
+    regular expression. Avenues to explore include limiting what can match
+    (avoiding "." when "[a-z0-9]" or other character class will do), use of
+    atomic grouping and possessive quantifiers or just not using regular
+    expressions against untrusted data.
+
+  * It can be important to correctly use ${quote:...}, ${quote_local_part:...}
+    and ${quote_<lookup-type>:...} expansion items to ensure that data is
+    correctly constructed.
+
+  * Some lookups might return multiple results, even though normal usage is
+    only expected to yield one result.
+
+
+56.7 IPv4 source routing
+------------------------
+
+Many operating systems suppress IP source-routed packets in the kernel, but
+some cannot be made to do this, so Exim does its own check. It logs incoming
+IPv4 source-routed TCP calls, and then drops them. Things are all different in
+IPv6. No special checking is currently done.
+
+
+56.8 The VRFY, EXPN, and ETRN commands in SMTP
+----------------------------------------------
+
+Support for these SMTP commands is disabled by default. If required, they can
+be enabled by defining suitable ACLs.
+
+
+56.9 Privileged users
+---------------------
+
+Exim recognizes two sets of users with special privileges. Trusted users are
+able to submit new messages to Exim locally, but supply their own sender
+addresses and information about a sending host. For other users submitting
+local messages, Exim sets up the sender address from the uid, and doesn't
+permit a remote host to be specified.
+
+However, an untrusted user is permitted to use the -f command line option in
+the special form -f <> to indicate that a delivery failure for the message
+should not cause an error report. This affects the message's envelope, but it
+does not affect the Sender: header. Untrusted users may also be permitted to
+use specific forms of address with the -f option by setting the 
+untrusted_set_sender option.
+
+Trusted users are used to run processes that receive mail messages from some
+other mail domain and pass them on to Exim for delivery either locally, or over
+the Internet. Exim trusts a caller that is running as root, as the Exim user,
+as any user listed in the trusted_users configuration option, or under any
+group listed in the trusted_groups option.
+
+Admin users are permitted to do things to the messages on Exim's queue. They
+can freeze or thaw messages, cause them to be returned to their senders, remove
+them entirely, or modify them in various ways. In addition, admin users can run
+the Exim monitor and see all the information it is capable of providing, which
+includes the contents of files on the spool.
+
+By default, the use of the -M and -q options to cause Exim to attempt delivery
+of messages on its queue is restricted to admin users. This restriction can be
+relaxed by setting the no_prod_requires_admin option. Similarly, the use of -bp
+(and its variants) to list the contents of the queue is also restricted to
+admin users. This restriction can be relaxed by setting 
+no_queue_list_requires_admin.
+
+Exim recognizes an admin user if the calling process is running as root or as
+the Exim user or if any of the groups associated with the calling process is
+the Exim group. It is not necessary actually to be running under the Exim
+group. However, if admin users who are not root or the Exim user are to access
+the contents of files on the spool via the Exim monitor (which runs
+unprivileged), Exim must be built to allow group read access to its spool
+files.
+
+By default, regular users are trusted to perform basic testing and
+introspection commands, as themselves. This setting can be tightened by setting
+the commandline_checks_require_admin option. This affects most of the checking
+options, such as -be and anything else -b*.
+
+
+56.10 Spool files
+-----------------
+
+Exim's spool directory and everything it contains is owned by the Exim user and
+set to the Exim group. The mode for spool files is defined in the Local/
+Makefile configuration file, and defaults to 0640. This means that any user who
+is a member of the Exim group can access these files.
+
+
+56.11 Use of argv[0]
+--------------------
+
+Exim examines the last component of argv[0], and if it matches one of a set of
+specific strings, Exim assumes certain options. For example, calling Exim with
+the last component of argv[0] set to "rsmtp" is exactly equivalent to calling
+it with the option -bS. There are no security implications in this.
+
+
+56.12 Use of %f formatting
+--------------------------
+
+The only use made of "%f" by Exim is in formatting load average values. These
+are actually stored in integer variables as 1000 times the load average.
+Consequently, their range is limited and so therefore is the length of the
+converted output.
+
+
+56.13 Embedded Exim path
+------------------------
+
+Exim uses its own path name, which is embedded in the code, only when it needs
+to re-exec in order to regain root privilege. Therefore, it is not root when it
+does so. If some bug allowed the path to get overwritten, it would lead to an
+arbitrary program's being run as exim, not as root.
+
+
+56.14 Dynamic module directory
+------------------------------
+
+Any dynamically loadable modules must be installed into the directory defined
+in "LOOKUP_MODULE_DIR" in Local/Makefile for Exim to permit loading it.
+
+
+56.15 Use of sprintf()
+----------------------
+
+A large number of occurrences of "sprintf" in the code are actually calls to 
+string_sprintf(), a function that returns the result in malloc'd store. The
+intermediate formatting is done into a large fixed buffer by a function that
+runs through the format string itself, and checks the length of each conversion
+before performing it, thus preventing buffer overruns.
+
+The remaining uses of sprintf() happen in controlled circumstances where the
+output buffer is known to be sufficiently long to contain the converted string.
+
+
+56.16 Use of debug_printf() and log_write()
+-------------------------------------------
+
+Arbitrary strings are passed to both these functions, but they do their
+formatting by calling the function string_vformat(), which runs through the
+format string itself, and checks the length of each conversion.
+
+
+56.17 Use of strcat() and strcpy()
+----------------------------------
+
+These are used only in cases where the output buffer is known to be large
+enough to hold the result.
+
+
+
+===============================================================================
+57. FORMAT OF SPOOL FILES
+
+A message on Exim's queue consists of two files, whose names are the message id
+followed by -D and -H, respectively. The data portion of the message is kept in
+the -D file on its own. The message's envelope, status, and headers are all
+kept in the -H file, whose format is described in this chapter. Each of these
+two files contains the final component of its own name as its first line. This
+is insurance against disk crashes where the directory is lost but the files
+themselves are recoverable.
+
+The file formats may be changed, or new formats added, at any release. Spool
+files are not intended as an interface to other programs and should not be used
+as such.
+
+Some people are tempted into editing -D files in order to modify messages. You
+need to be extremely careful if you do this; it is not recommended and you are
+on your own if you do it. Here are some of the pitfalls:
+
+  * You must ensure that Exim does not try to deliver the message while you are
+    fiddling with it. The safest way is to take out a write lock on the -D
+    file, which is what Exim itself does, using fcntl(). If you update the file
+    in place, the lock will be retained. If you write a new file and rename it,
+    the lock will be lost at the instant of rename.
+
+  * If you change the number of lines in the file, the value of $body_linecount
+    , which is stored in the -H file, will be incorrect and can cause
+    incomplete transmission of messages or undeliverable messages.
+
+  * If the message is in MIME format, you must take care not to break it.
+
+  * If the message is cryptographically signed, any change will invalidate the
+    signature.
+
+All in all, modifying -D files is fraught with danger.
+
+Files whose names end with -J may also be seen in the input directory (or its
+subdirectories when split_spool_directory is set). These are journal files,
+used to record addresses to which the message has been delivered during the
+course of a delivery attempt. If there are still undelivered recipients at the
+end, the -H file is updated, and the -J file is deleted. If, however, there is
+some kind of crash (for example, a power outage) before this happens, the -J
+file remains in existence. When Exim next processes the message, it notices the
+-J file and uses it to update the -H file before starting the next delivery
+attempt.
+
+Files whose names end with -K or .eml may also be seen in the spool. These are
+temporaries used for DKIM or malware processing, when that is used. They should
+be tidied up by normal operations; any old ones are probably relics of crashes
+and can be removed.
+
+
+57.1 Format of the -H file
+--------------------------
+
+The second line of the -H file contains the login name for the uid of the
+process that called Exim to read the message, followed by the numerical uid and
+gid. For a locally generated message, this is normally the user who sent the
+message. For a message received over TCP/IP via the daemon, it is normally the
+Exim user.
+
+The third line of the file contains the address of the message's sender as
+transmitted in the envelope, contained in angle brackets. The sender address is
+empty for bounce messages. For incoming SMTP mail, the sender address is given
+in the MAIL command. For locally generated mail, the sender address is created
+by Exim from the login name of the current user and the configured 
+qualify_domain. However, this can be overridden by the -f option or a leading
+"From " line if the caller is trusted, or if the supplied address is "<>" or an
+address that matches untrusted_set_senders.
+
+The fourth line contains two numbers. The first is the time that the message
+was received, in the conventional Unix form - the number of seconds since the
+start of the epoch. The second number is a count of the number of messages
+warning of delayed delivery that have been sent to the sender.
+
+There follow a number of lines starting with a hyphen. These contain variables,
+can appear in any order, and are omitted when not relevant.
+
+If there is a second hyphen after the first, the corresponding data is tainted.
+If there is a value in parentheses, the data is quoted for a lookup.
+
+The following word specifies a variable, and the remainder of the item depends
+on the variable.
+
+-acl <number> <length>
+
+    This item is obsolete, and is not generated from Exim release 4.61 onwards;
+    -aclc and -aclm are used instead. However, -acl is still recognized, to
+    provide backward compatibility. In the old format, a line of this form is
+    present for every ACL variable that is not empty. The number identifies the
+    variable; the acl_cx variables are numbered 0-9 and the acl_mx variables
+    are numbered 10-19. The length is the length of the data string for the
+    variable. The string itself starts at the beginning of the next line, and
+    is followed by a newline character. It may contain internal newlines.
+
+-aclc <rest-of-name> <length>
+
+    A line of this form is present for every ACL connection variable that is
+    defined. Note that there is a space between -aclc and the rest of the name.
+    The length is the length of the data string for the variable. The string
+    itself starts at the beginning of the next line, and is followed by a
+    newline character. It may contain internal newlines.
+
+-aclm <rest-of-name> <length>
+
+    A line of this form is present for every ACL message variable that is
+    defined. Note that there is a space between -aclm and the rest of the name.
+    The length is the length of the data string for the variable. The string
+    itself starts at the beginning of the next line, and is followed by a
+    newline character. It may contain internal newlines.
+
+-active_hostname <hostname>
+
+    This is present if, when the message was received over SMTP, the value of
+    $smtp_active_hostname was different to the value of $primary_hostname.
+
+-allow_unqualified_recipient
+
+    This is present if unqualified recipient addresses are permitted in header
+    lines (to stop such addresses from being qualified if rewriting occurs at
+    transport time). Local messages that were input using -bnq and remote
+    messages from hosts that match recipient_unqualified_hosts set this flag.
+
+-allow_unqualified_sender
+
+    This is present if unqualified sender addresses are permitted in header
+    lines (to stop such addresses from being qualified if rewriting occurs at
+    transport time). Local messages that were input using -bnq and remote
+    messages from hosts that match sender_unqualified_hosts set this flag.
+
+-auth_id <text>
+
+    The id information for a message received on an authenticated SMTP
+    connection - the value of the $authenticated_id variable.
+
+-auth_sender <address>
+
+    The address of an authenticated sender - the value of the
+    $authenticated_sender variable.
+
+-body_linecount <number>
+
+    This records the number of lines in the body of the message, and is present
+    unless -spool_file_wireformat is.
+
+-body_zerocount <number>
+
+    This records the number of binary zero bytes in the body of the message,
+    and is present if the number is greater than zero.
+
+-deliver_firsttime
+
+    This is written when a new message is first added to the spool. When the
+    spool file is updated after a deferral, it is omitted.
+
+-frozen <time>
+
+    The message is frozen, and the freezing happened at <time>.
+
+-helo_name <text>
+
+    This records the host name as specified by a remote host in a HELO or EHLO
+    command.
+
+-host_address <address>.<port>
+
+    This records the IP address of the host from which the message was received
+    and the remote port number that was used. It is omitted for locally
+    generated messages.
+
+-host_auth <text>
+
+    If the message was received on an authenticated SMTP connection, this
+    records the name of the authenticator - the value of the
+    $sender_host_authenticated variable.
+
+-host_lookup_failed
+
+    This is present if an attempt to look up the sending host's name from its
+    IP address failed. It corresponds to the $host_lookup_failed variable.
+
+-host_name <text>
+
+    This records the name of the remote host from which the message was
+    received, if the host name was looked up from the IP address when the
+    message was being received. It is not present if no reverse lookup was
+    done.
+
+-ident <text>
+
+    For locally submitted messages, this records the login of the originating
+    user, unless it was a trusted user and the -oMt option was used to specify
+    an ident value. For messages received over TCP/IP, this records the ident
+    string supplied by the remote host, if any.
+
+-interface_address <address>.<port>
+
+    This records the IP address of the local interface and the port number
+    through which a message was received from a remote host. It is omitted for
+    locally generated messages.
+
+-local
+
+    The message is from a local sender.
+
+-localerror
+
+    The message is a locally-generated bounce message.
+
+-local_scan <string>
+
+    This records the data string that was returned by the local_scan() function
+    when the message was received - the value of the $local_scan_data variable.
+    It is omitted if no data was returned.
+
+-manual_thaw
+
+    The message was frozen but has been thawed manually, that is, by an
+    explicit Exim command rather than via the auto-thaw process.
+
+-N
+
+    A testing delivery process was started using the -N option to suppress any
+    actual deliveries, but delivery was deferred. At any further delivery
+    attempts, -N is assumed.
+
+-received_protocol
+
+    This records the value of the $received_protocol variable, which contains
+    the name of the protocol by which the message was received.
+
+-sender_set_untrusted
+
+    The envelope sender of this message was set by an untrusted local caller
+    (used to ensure that the caller is displayed in queue listings).
+
+-spam_score_int <number>
+
+    If a message was scanned by SpamAssassin, this is present. It records the
+    value of $spam_score_int.
+
+-spool_file_wireformat
+
+    The -D file for this message is in wire-format (for ESMTP CHUNKING) rather
+    than Unix-format. The line-ending is CRLF rather than newline. There is
+    still, however, no leading-dot-stuffing.
+
+-tls_certificate_verified
+
+    A TLS certificate was received from the client that sent this message, and
+    the certificate was verified by the server.
+
+-tls_cipher <cipher name>
+
+    When the message was received over an encrypted connection, this records
+    the name of the cipher suite that was used.
+
+-tls_peerdn <peer DN>
+
+    When the message was received over an encrypted connection, and a
+    certificate was received from the client, this records the Distinguished
+    Name from that certificate.
+
+Following the options there is a list of those addresses to which the message
+is not to be delivered. This set of addresses is initialized from the command
+line when the -t option is used and extract_addresses_remove_arguments is set;
+otherwise it starts out empty. Whenever a successful delivery is made, the
+address is added to this set. The addresses are kept internally as a balanced
+binary tree, and it is a representation of that tree which is written to the
+spool file. If an address is expanded via an alias or forward file, the
+original address is added to the tree when deliveries to all its child
+addresses are complete.
+
+If the tree is empty, there is a single line in the spool file containing just
+the text "XX". Otherwise, each line consists of two letters, which are either Y
+or N, followed by an address. The address is the value for the node of the
+tree, and the letters indicate whether the node has a left branch and/or a
+right branch attached to it, respectively. If branches exist, they immediately
+follow. Here is an example of a three-node tree:
+
+YY darcy@austen.fict.example
+NN alice@wonderland.fict.example
+NN editor@thesaurus.ref.example
+
+After the non-recipients tree, there is a list of the message's recipients.
+This is a simple list, preceded by a count. It includes all the original
+recipients of the message, including those to whom the message has already been
+delivered. In the simplest case, the list contains one address per line. For
+example:
+
+4
+editor@thesaurus.ref.example
+darcy@austen.fict.example
+rdo@foundation
+alice@wonderland.fict.example
+
+However, when a child address has been added to the top-level addresses as a
+result of the use of the one_time option on a redirect router, each line is of
+the following form:
+
+<top-level address> <errors_to address> <length>,<parent number>#<flag bits>
+
+The 01 flag bit indicates the presence of the three other fields that follow
+the top-level address. Other bits may be used in future to support additional
+fields. The <parent number> is the offset in the recipients list of the
+original parent of the "one time" address. The first two fields are the
+envelope sender that is associated with this address and its length. If the
+length is zero, there is no special envelope sender (there are then two space
+characters in the line). A non-empty field can arise from a redirect router
+that has an errors_to setting.
+
+A blank line separates the envelope and status information from the headers
+which follow. A header may occupy several lines of the file, and to save effort
+when reading it in, each header is preceded by a number and an identifying
+character. The number is the number of characters in the header, including any
+embedded newlines and the terminating newline. The character is one of the
+following:
+
+<blank> header in which Exim has no special interest
+"B"     Bcc: header
+"C"     Cc: header
+"F"     From: header
+"I"     Message-id: header
+"P"     Received: header - P for "postmark"
+"R"     Reply-To: header
+"S"     Sender: header
+"T"     To: header
+"*"     replaced or deleted header
+
+Deleted or replaced (rewritten) headers remain in the spool file for debugging
+purposes. They are not transmitted when the message is delivered. Here is a
+typical set of headers:
+
+111P Received: by hobbit.fict.example with local (Exim 4.00)
+id 14y9EI-00026G-00; Fri, 11 May 2001 10:28:59 +0100
+049  Message-Id: <E14y9EI-00026G-00@hobbit.fict.example>
+038* X-rewrote-sender: bb@hobbit.fict.example
+042* From: Bilbo Baggins <bb@hobbit.fict.example>
+049F From: Bilbo Baggins <B.Baggins@hobbit.fict.example>
+099* To: alice@wonderland.fict.example, rdo@foundation,
+darcy@austen.fict.example, editor@thesaurus.ref.example
+104T To: alice@wonderland.fict.example, rdo@foundation.example,
+darcy@austen.fict.example, editor@thesaurus.ref.example
+038  Date: Fri, 11 May 2001 10:28:59 +0100
+
+The asterisked headers indicate that the envelope sender, From: header, and To:
+header have been rewritten, the last one because routing expanded the
+unqualified domain foundation.
+
+
+57.2 Format of the -D file
+--------------------------
+
+The data file is traditionally in Unix-standard format: lines are ended with an
+ASCII newline character. However, when the spool_wireformat main option is used
+some -D files can have an alternate format. This is flagged by a 
+-spool_file_wireformat line in the corresponding -H file. The -D file lines
+(not including the first name-component line) are suitable for direct copying
+to the wire when transmitting using the ESMTP CHUNKING option, meaning lower
+processing overhead. Lines are terminated with an ASCII CRLF pair. There is no
+dot-stuffing (and no dot-termination).
+
+
+
+===============================================================================
+58. DKIM, SPF, SRS AND DMARC
+
+
+58.1 DKIM (DomainKeys Identified Mail)
+--------------------------------------
+
+DKIM is a mechanism by which messages sent by some entity can be provably
+linked to a domain which that entity controls. It permits reputation to be
+tracked on a per-domain basis, rather than merely upon source IP address. DKIM
+is documented in RFC 6376.
+
+As DKIM relies on the message being unchanged in transit, messages handled by a
+mailing-list (which traditionally adds to the message) will not match any
+original DKIM signature.
+
+DKIM support is compiled into Exim by default if TLS support is present. It can
+be disabled by setting DISABLE_DKIM=yes in Local/Makefile.
+
+Exim's DKIM implementation allows for
+
+ 1. Signing outgoing messages: This function is implemented in the SMTP
+    transport. It can co-exist with all other Exim features (including
+    transport filters) except cutthrough delivery.
+
+ 2. Verifying signatures in incoming messages: This is implemented by an
+    additional ACL (acl_smtp_dkim), which can be called several times per
+    message, with different signature contexts.
+
+In typical Exim style, the verification implementation does not include any
+default "policy". Instead it enables you to build your own policy using Exim's
+standard controls.
+
+Please note that verification of DKIM signatures in incoming mail is turned on
+by default for logging (in the <= line) purposes.
+
+Additional log detail can be enabled using the dkim_verbose log_selector. When
+set, for each signature in incoming email, exim will log a line displaying the
+most important signature details, and the signature status. Here is an example
+(with line-breaks added for clarity):
+
+2009-09-09 10:22:28 1MlIRf-0003LU-U3 DKIM:
+    d=facebookmail.com s=q1-2009b
+    c=relaxed/relaxed a=rsa-sha1
+    i=@facebookmail.com t=1252484542 [verification succeeded]
+
+You might want to turn off DKIM verification processing entirely for internal
+or relay mail sources. To do that, set the dkim_disable_verify ACL control
+modifier. This should typically be done in the RCPT ACL, at points where you
+accept mail from relay sources (internal hosts or authenticated senders).
+
+
+58.2 Signing outgoing messages
+------------------------------
+
+For signing to be usable you must have published a DKIM record in DNS. Note
+that RFC 8301 (which does not cover EC keys) says:
+
+rsa-sha1 MUST NOT be used for signing or verifying.
+
+Signers MUST use RSA keys of at least 1024 bits for all keys.
+Signers SHOULD use RSA keys of at least 2048 bits.
+
+Note also that the key content (the 'p=' field) in the DNS record is different
+between RSA and EC keys; for the former it is the base64 of the ASN.1 for the
+RSA public key (equivalent to the private-key .pem with the header/trailer
+stripped) but for EC keys it is the base64 of the pure key; no ASN.1 wrapping.
+
+Signing is enabled by setting private options on the SMTP transport. These
+options take (expandable) strings as arguments.
+
++-------------------------------------------------------+
+|dkim_domain|Use: smtp|Type: string list*|Default: unset|
++-------------------------------------------------------+
+
+The domain(s) you want to sign with. After expansion, this can be a list. Each
+element in turn, lowercased, is put into the $dkim_domain expansion variable
+while expanding the remaining signing options. If it is empty after expansion,
+DKIM signing is not done, and no error will result even if dkim_strict is set.
+
++---------------------------------------------------------+
+|dkim_selector|Use: smtp|Type: string list*|Default: unset|
++---------------------------------------------------------+
+
+This sets the key selector string. After expansion, which can use $dkim_domain,
+this can be a list. Each element in turn is put in the expansion variable 
+$dkim_selector which may be used in the dkim_private_key option along with 
+$dkim_domain. If the option is empty after expansion, DKIM signing is not done
+for this domain, and no error will result even if dkim_strict is set.
+
+To do, for example, dual-signing with RSA and EC keys this could be be used:
+
+dkim_selector = ec_sel : rsa_sel
+dkim_private_key = KEYS_DIR/$dkim_selector
+
++-------------------------------------------------------+
+|dkim_private_key|Use: smtp|Type: string*|Default: unset|
++-------------------------------------------------------+
+
+This sets the private key to use. You can use the $dkim_domain and 
+$dkim_selector expansion variables to determine the private key to use. The
+result can either
+
+  * be a valid RSA private key in ASCII armor (.pem file), including line
+    breaks
+
+  * with GnuTLS 3.6.0 or OpenSSL 1.1.1 or later, be a valid Ed25519 private key
+    (same format as above)
+
+  * start with a slash, in which case it is treated as a file that contains the
+    private key
+
+  * be "0", "false" or the empty string, in which case the message will not be
+    signed. This case will not result in an error, even if dkim_strict is set.
+
+To generate keys under OpenSSL:
+
+openssl genrsa -out dkim_rsa.private 2048
+openssl rsa -in dkim_rsa.private -out /dev/stdout -pubout -outform PEM
+
+The result file from the first command should be retained, and this option set
+to use it. Take the base-64 lines from the output of the second command,
+concatenated, for the DNS TXT record. See section 3.6 of RFC6376 for the record
+specification.
+
+Under GnuTLS:
+
+certtool --generate-privkey --rsa --bits=2048 --password='' -8 --outfile=dkim_rsa.private
+certtool --load-privkey=dkim_rsa.private --pubkey-info
+
+Note that RFC 8301 says:
+
+Signers MUST use RSA keys of at least 1024 bits for all keys.
+Signers SHOULD use RSA keys of at least 2048 bits.
+
+EC keys for DKIM are defined by RFC 8463. They are considerably smaller than
+RSA keys for equivalent protection. As they are a recent development, users
+should consider dual-signing (by setting a list of selectors, and an expansion
+for this option) for some transition period. The "_CRYPTO_SIGN_ED25519" macro
+will be defined if support is present for EC keys.
+
+OpenSSL 1.1.1 and GnuTLS 3.6.0 can create Ed25519 private keys:
+
+openssl genpkey -algorithm ed25519 -out dkim_ed25519.private
+certtool --generate-privkey --key-type=ed25519 --outfile=dkim_ed25519.private
+
+To produce the required public key value for a DNS record:
+
+openssl pkey -outform DER -pubout -in dkim_ed25519.private | tail -c +13 | base64
+certtool --load_privkey=dkim_ed25519.private --pubkey_info --outder | tail -c +13 | base64
+
+Exim also supports an alternate format of Ed25519 keys in DNS which was a
+candidate during development of the standard, but not adopted. A future release
+will probably drop that support.
+
++-------------------------------------------------+
+|dkim_hash|Use: smtp|Type: string*|Default: sha256|
++-------------------------------------------------+
+
+Can be set to any one of the supported hash methods, which are:
+
+  * "sha1" - should not be used, is old and insecure
+
+  * "sha256" - the default
+
+  * "sha512" - possibly more secure but less well supported
+
+Note that RFC 8301 says:
+
+rsa-sha1 MUST NOT be used for signing or verifying.
+
++----------------------------------------------------+
+|dkim_identity|Use: smtp|Type: string*|Default: unset|
++----------------------------------------------------+
+
+If set after expansion, the value is used to set an "i=" tag in the signing
+header. The DKIM standards restrict the permissible syntax of this optional tag
+to a mail address, with possibly-empty local part, an @, and a domain identical
+to or subdomain of the "d=" tag value. Note that Exim does not check the value.
+
++-------------------------------------------------+
+|dkim_canon|Use: smtp|Type: string*|Default: unset|
++-------------------------------------------------+
+
+This option sets the canonicalization method used when signing a message. The
+DKIM RFC currently supports two methods: "simple" and "relaxed". The option
+defaults to "relaxed" when unset. Note: the current implementation only
+supports signing with the same canonicalization method for both headers and
+body.
+
++--------------------------------------------------+
+|dkim_strict|Use: smtp|Type: string*|Default: unset|
++--------------------------------------------------+
+
+This option defines how Exim behaves when signing a message that should be
+signed fails for some reason. When the expansion evaluates to either "1" or
+"true", Exim will defer. Otherwise Exim will send the message unsigned. You can
+use the $dkim_domain and $dkim_selector expansion variables here.
+
++------------------------------------------------------------+
+|dkim_sign_headers|Use: smtp|Type: string*|Default: see below|
++------------------------------------------------------------+
+
+If set, this option must expand to a colon-separated list of header names.
+Headers with these names, or the absence or such a header, will be included in
+the message signature. When unspecified, the header names listed in RFC4871
+will be used, whether or not each header is present in the message. The default
+list is available for the expansion in the macro "_DKIM_SIGN_HEADERS" and an
+oversigning variant is in "_DKIM_OVERSIGN_HEADERS".
+
+If a name is repeated, multiple headers by that name (or the absence thereof)
+will be signed. The textually later headers in the headers part of the message
+are signed first, if there are multiples.
+
+A name can be prefixed with either an "=" or a "+" character. If an "=" prefix
+is used, all headers that are present with this name will be signed. If a "+"
+prefix if used, all headers that are present with this name will be signed, and
+one signature added for a missing header with the name will be appended.
+
++-------------------------------------------------------+
+|dkim_timestamps|Use: smtp|Type: integer*|Default: unset|
++-------------------------------------------------------+
+
+This option controls the inclusion of timestamp information in the signature.
+If not set, no such information will be included. Otherwise, must be an
+unsigned number giving an offset in seconds from the current time for the
+expiry tag (eg. 1209600 for two weeks); both creation (t=) and expiry (x=) tags
+will be included.
+
+RFC 6376 lists these tags as RECOMMENDED.
+
+
+58.3 Verifying DKIM signatures in incoming mail
+-----------------------------------------------
+
+Verification of DKIM signatures in SMTP incoming email is done for all messages
+for which an ACL control dkim_disable_verify has not been set. Individual
+classes of signature algorithm can be ignored by changing the main options 
+dkim_verify_hashes or dkim_verify_keytypes. The dkim_verify_minimal option can
+be set to cease verification processing for a message once the first passing
+signature is found.
+
+Performing verification sets up information used by the authresults expansion
+item.
+
+For most purposes the default option settings suffice and the remainder of this
+section can be ignored.
+
+The results of verification are made available to the acl_smtp_dkim ACL, which
+can examine and modify them. A missing ACL definition defaults to accept. By
+default, the ACL is called once for each syntactically(!) correct signature in
+the incoming message. If any ACL call does not accept, the message is not
+accepted. If a cutthrough delivery was in progress for the message, that is
+summarily dropped (having wasted the transmission effort).
+
+To evaluate the verification result in the ACL a large number of expansion
+variables containing the signature status and its details are set up during the
+runtime of the ACL.
+
+Calling the ACL only for existing signatures is not sufficient to build more
+advanced policies. For that reason, the main option dkim_verify_signers, and an
+expansion variable $dkim_signers exist.
+
+The main option dkim_verify_signers can be set to a colon-separated list of
+DKIM domains or identities for which the ACL acl_smtp_dkim is called. It is
+expanded when the message has been received. At this point, the expansion
+variable $dkim_signers already contains a colon-separated list of signer
+domains and identities for the message. When dkim_verify_signers is not
+specified in the main configuration, it defaults as:
+
+dkim_verify_signers = $dkim_signers
+
+This leads to the default behaviour of calling acl_smtp_dkim for each DKIM
+signature in the message. Current DKIM verifiers may want to explicitly call
+the ACL for known domains or identities. This would be achieved as follows:
+
+dkim_verify_signers = paypal.com:ebay.com:$dkim_signers
+
+This would result in acl_smtp_dkim always being called for "paypal.com" and
+"ebay.com", plus all domains and identities that have signatures in the
+message. You can also be more creative in constructing your policy. For
+example:
+
+dkim_verify_signers = $sender_address_domain:$dkim_signers
+
+If a domain or identity is listed several times in the (expanded) value of 
+dkim_verify_signers, the ACL is only called once for that domain or identity.
+
+Note that if the option is set using untrustworthy data (such as the From:
+header) care should be taken to force lowercase for domains and for the domain
+part if identities. The default setting can be regarded as trustworthy in this
+respect.
+
+If multiple signatures match a domain (or identity), the ACL is called once for
+each matching signature.
+
+Inside the DKIM ACL, the following expansion variables are available (from most
+to least important):
+
+$dkim_cur_signer
+
+    The signer that is being evaluated in this ACL run. This can be a domain or
+    an identity. This is one of the list items from the expanded main option 
+    dkim_verify_signers (see above).
+
+$dkim_verify_status
+
+    Within the DKIM ACL, a string describing the general status of the
+    signature. One of
+
+      o none: There is no signature in the message for the current domain or
+        identity (as reflected by $dkim_cur_signer).
+
+      o invalid: The signature could not be verified due to a processing error.
+        More detail is available in $dkim_verify_reason.
+
+      o fail: Verification of the signature failed. More detail is available in
+        $dkim_verify_reason.
+
+      o pass: The signature passed verification. It is valid.
+
+    This variable can be overwritten using an ACL 'set' modifier. This might,
+    for instance, be done to enforce a policy restriction on hash-method or
+    key-size:
+
+      warn condition       = ${if eq {$dkim_verify_status}{pass}}
+           condition       = ${if eq {${length_3:$dkim_algo}}{rsa}}
+           condition       = ${if or {{eq {$dkim_algo}{rsa-sha1}} \
+                                      {< {$dkim_key_length}{1024}}}}
+           logwrite        = NOTE: forcing DKIM verify fail (was pass)
+           set dkim_verify_status = fail
+           set dkim_verify_reason = hash too weak or key too short
+
+    So long as a DKIM ACL is defined (it need do no more than accept), after
+    all the DKIM ACL runs have completed, the value becomes a colon-separated
+    list of the values after each run. This is maintained for the mime, prdr
+    and data ACLs.
+
+$dkim_verify_reason
+
+    A string giving a little bit more detail when $dkim_verify_status is either
+    "fail" or "invalid". One of
+
+      o pubkey_unavailable (when $dkim_verify_status="invalid"): The public key
+        for the domain could not be retrieved. This may be a temporary problem.
+
+      o pubkey_syntax (when $dkim_verify_status="invalid"): The public key
+        record for the domain is syntactically invalid.
+
+      o bodyhash_mismatch (when $dkim_verify_status="fail"): The calculated
+        body hash does not match the one specified in the signature header.
+        This means that the message body was modified in transit.
+
+      o signature_incorrect (when $dkim_verify_status="fail"): The signature
+        could not be verified. This may mean that headers were modified,
+        re-written or otherwise changed in a way which is incompatible with
+        DKIM verification. It may of course also mean that the signature is
+        forged.
+
+    This variable can be overwritten, with any value, using an ACL 'set'
+    modifier.
+
+$dkim_domain
+
+    The signing domain. IMPORTANT: This variable is only populated if there is
+    an actual signature in the message for the current domain or identity (as
+    reflected by $dkim_cur_signer).
+
+$dkim_identity
+
+    The signing identity, if present. IMPORTANT: This variable is only
+    populated if there is an actual signature in the message for the current
+    domain or identity (as reflected by $dkim_cur_signer).
+
+$dkim_selector
+
+    The key record selector string.
+
+$dkim_algo
+
+    The algorithm used. One of 'rsa-sha1' or 'rsa-sha256'. If running under
+    GnuTLS 3.6.0 or OpenSSL 1.1.1 or later, may also be 'ed25519-sha256'. The
+    "_CRYPTO_SIGN_ED25519" macro will be defined if support is present for EC
+    keys.
+
+    Note that RFC 8301 says:
+
+    rsa-sha1 MUST NOT be used for signing or verifying.
+
+    DKIM signatures identified as having been signed with historic
+    algorithms (currently, rsa-sha1) have permanently failed evaluation
+
+    To enforce this you must either have a DKIM ACL which checks this variable
+    and overwrites the $dkim_verify_status variable as discussed above, or have
+    set the main option dkim_verify_hashes to exclude processing of such
+    signatures.
+
+$dkim_canon_body
+
+    The body canonicalization method. One of 'relaxed' or 'simple'.
+
+$dkim_canon_headers
+
+    The header canonicalization method. One of 'relaxed' or 'simple'.
+
+$dkim_copiedheaders
+
+    A transcript of headers and their values which are included in the
+    signature (copied from the 'z=' tag of the signature). Note that RFC6376
+    requires that verification fail if the From: header is not included in the
+    signature. Exim does not enforce this; sites wishing strict enforcement
+    should code the check explicitly.
+
+$dkim_bodylength
+
+    The number of signed body bytes. If zero ("0"), the body is unsigned. If no
+    limit was set by the signer, "9999999999999" is returned. This makes sure
+    that this variable always expands to an integer value. Note: The presence
+    of the signature tag specifying a signing body length is one possible route
+    to spoofing of valid DKIM signatures. A paranoid implementation might wish
+    to regard signature where this variable shows less than the "no limit"
+    return as being invalid.
+
+$dkim_created
+
+    UNIX timestamp reflecting the date and time when the signature was created.
+    When this was not specified by the signer, "0" is returned.
+
+$dkim_expires
+
+    UNIX timestamp reflecting the date and time when the signer wants the
+    signature to be treated as "expired". When this was not specified by the
+    signer, "9999999999999" is returned. This makes it possible to do useful
+    integer size comparisons against this value. Note that Exim does not check
+    this value.
+
+$dkim_headernames
+
+    A colon-separated list of names of headers included in the signature.
+
+$dkim_key_testing
+
+    "1" if the key record has the "testing" flag set, "0" if not.
+
+$dkim_key_nosubdomains
+
+    "1" if the key record forbids subdomaining, "0" otherwise.
+
+$dkim_key_srvtype
+
+    Service type (tag s=) from the key record. Defaults to "*" if not specified
+    in the key record.
+
+$dkim_key_granularity
+
+    Key granularity (tag g=) from the key record. Defaults to "*" if not
+    specified in the key record.
+
+$dkim_key_notes
+
+    Notes from the key record (tag n=).
+
+$dkim_key_length
+
+    Number of bits in the key. Valid only once the key is loaded, which is at
+    the time the header signature is verified, which is after the body hash is.
+
+    Note that RFC 8301 says:
+
+    Verifiers MUST NOT consider signatures using RSA keys of
+    less than 1024 bits as valid signatures.
+
+    This is enforced by the default setting for the dkim_verify_min_keysizes
+    option.
+
+In addition, two ACL conditions are provided:
+
+dkim_signers
+
+    ACL condition that checks a colon-separated list of domains or identities
+    for a match against the domain or identity that the ACL is currently
+    verifying (reflected by $dkim_cur_signer). This is typically used to
+    restrict an ACL verb to a group of domains or identities. For example:
+
+    # Warn when Mail purportedly from GMail has no gmail signature
+    warn sender_domains = gmail.com
+         dkim_signers = gmail.com
+         dkim_status = none
+         log_message = GMail sender without gmail.com DKIM signature
+
+    Note that the above does not check for a total lack of DKIM signing; for
+    that check for empty $h_DKIM-Signature: in the data ACL.
+
+dkim_status
+
+    ACL condition that checks a colon-separated list of possible DKIM
+    verification results against the actual result of verification. This is
+    typically used to restrict an ACL verb to a list of verification outcomes,
+    for example:
+
+    deny sender_domains = paypal.com:paypal.de
+         dkim_signers = paypal.com:paypal.de
+         dkim_status = none:invalid:fail
+         message = Mail from Paypal with invalid/missing signature
+
+    The possible status keywords are: 'none','invalid','fail' and 'pass'.
+    Please see the documentation of the $dkim_verify_status expansion variable
+    above for more information of what they mean.
+
+
+58.4 SPF (Sender Policy Framework)
+----------------------------------
+
+SPF is a mechanism whereby a domain may assert which IP addresses may transmit
+messages with its domain in the envelope from, documented by RFC 7208. For more
+information on SPF see http://www.open-spf.org, a static copy of the http://
+openspf.org.
+
+Messages sent by a system not authorised will fail checking of such assertions.
+This includes retransmissions done by traditional forwarders.
+
+SPF verification support is built into Exim if SUPPORT_SPF=yes is set in Local/
+Makefile. The support uses the libspf2 library https://www.libspf2.org/. There
+is no Exim involvement in the transmission of messages; publishing certain DNS
+records is all that is required.
+
+For verification, an ACL condition and an expansion lookup are provided. 
+Performing verification sets up information used by the authresults expansion
+item.
+
+The ACL condition "spf" can be used at or after the MAIL ACL. It takes as an
+argument a list of strings giving the outcome of the SPF check, and will
+succeed for any matching outcome. Valid strings are:
+
+pass
+
+    The SPF check passed, the sending host is positively verified by SPF.
+
+fail
+
+    The SPF check failed, the sending host is NOT allowed to send mail for the
+    domain in the envelope-from address.
+
+softfail
+
+    The SPF check failed, but the queried domain can't absolutely confirm that
+    this is a forgery.
+
+none
+
+    The queried domain does not publish SPF records.
+
+neutral
+
+    The SPF check returned a "neutral" state. This means the queried domain has
+    published a SPF record, but wants to allow outside servers to send mail
+    under its domain as well. This should be treated like "none".
+
+permerror
+
+    This indicates a syntax error in the SPF record of the queried domain. You
+    may deny messages when this occurs.
+
+temperror
+
+    This indicates a temporary error during all processing, including Exim's
+    SPF processing. You may defer messages when this occurs.
+
+invalid
+
+    There was an error during processing of the SPF lookup
+
+You can prefix each string with an exclamation mark to invert its meaning, for
+example "!fail" will match all results but "fail". The string list is evaluated
+left-to-right, in a short-circuit fashion.
+
+Example:
+
+deny spf = fail
+     message = $sender_host_address is not allowed to send mail from \
+               ${if def:sender_address_domain \
+                    {$sender_address_domain}{$sender_helo_name}}.  \
+               Please see http://www.open-spf.org/Why;\
+               identity=${if def:sender_address_domain \
+                             {$sender_address}{$sender_helo_name}};\
+               ip=$sender_host_address
+
+Note: The above mentioned URL may not be as helpful as expected. You are
+encouraged to replace the link with a link to a site with more explanations.
+
+When the spf condition has run, it sets up several expansion variables:
+
+$spf_header_comment
+
+    This contains a human-readable string describing the outcome of the SPF
+    check. You can add it to a custom header or use it for logging purposes.
+
+$spf_received
+
+    This contains a complete Received-SPF: header (name and content) that can
+    be added to the message. Please note that according to the SPF draft, this
+    header must be added at the top of the header list, i.e. with
+
+    add_header = :at_start:$spf_received
+
+    See section 44.24 for further details.
+
+    Note: in case of "Best-guess" (see below), the convention is to put this
+    string in a header called X-SPF-Guess: instead.
+
+$spf_result
+
+    This contains the outcome of the SPF check in string form, currently one of
+    pass, fail, softfail, none, neutral, permerror, temperror, or "(invalid)".
+
+$spf_result_guessed
+
+    This boolean is true only if a best-guess operation was used and required
+    in order to obtain a result.
+
+$spf_smtp_comment
+
+    This contains a string that can be used in a SMTP response to the calling
+    party. Useful for "fail". The string is generated by the SPF library from
+    the template configured in the main config option spf_smtp_comment_template
+    .
+
+In addition to SPF, you can also perform checks for so-called "Best-guess".
+Strictly speaking, "Best-guess" is not standard SPF, but it is supported by the
+same framework that enables SPF capability. Refer to http://www.open-spf.org/
+FAQ/Best_guess_record for a description of what it means.
+
+To access this feature, simply use the spf_guess condition in place of the spf
+one. For example:
+
+deny spf_guess = fail
+     message = $sender_host_address doesn't look trustworthy to me
+
+In case you decide to reject messages based on this check, you should note that
+although it uses the same framework, "Best-guess" is not SPF, and therefore you
+should not mention SPF at all in your reject message.
+
+When the spf_guess condition has run, it sets up the same expansion variables
+as when spf condition is run, described above.
+
+Additionally, since Best-guess is not standardized, you may redefine what
+"Best-guess" means to you by redefining the main configuration spf_guess
+option. For example, the following:
+
+spf_guess = v=spf1 a/16 mx/16 ptr ?all
+
+would relax host matching rules to a broader network range.
+
+A lookup expansion is also available. It takes an email address as the key and
+an IP address (v4 or v6) as the database:
+
+  ${lookup {username@domain} spf {ip.ip.ip.ip}}
+
+The lookup will return the same result strings as can appear in $spf_result
+(pass,fail,softfail,neutral,none,err_perm,err_temp).
+
+
+58.5 SRS (Sender Rewriting Scheme)
+----------------------------------
+
+SRS can be used to modify sender addresses when forwarding so that SPF
+verification does not object to them. It operates by encoding the original
+envelope sender in a new sender local part and using a domain run by the
+forwarding site as the new domain for the sender. Any DSN message should be
+returned to this new sender at the forwarding site, which can extract the
+original sender from the coded local part and forward the DSN to the
+originator.
+
+This is a way of avoiding the breakage that SPF does to forwarding. The
+constructed local-part will be longer than the original, leading to possible
+problems with very long addresses. The changing of the sender address also
+hinders the tracing of mail problems.
+
+Exim can be built to include native SRS support. To do this SUPPORT_SRS=yes
+must be defined in Local/Makefile. If this has been done, the macros _HAVE_SRS
+and _HAVE_NATIVE_SRS will be defined. The support is limited to SRS0-encoding;
+SRS1 is not supported.
+
+To encode an address use this expansion item:
+
+${srs_encode {<secret>}{<return path>}{<original domain>}}
+
+    The first argument should be a secret known and used by all systems
+    handling the recipient domain for the original message. There is no need to
+    periodically change this key; a timestamp is also encoded. The second
+    argument should be given as the envelope sender address before this
+    encoding operation.
+
+    If this value is empty the the expansion result will be empty.
+
+    The third argument should be the recipient domain of the message when it
+    arrived at this system.
+
+To decode an address use this expansion condition:
+
+inbound_srs {<local part>}{<secret>}
+
+    The first argument should be the recipient local prt as is was received.
+    The second argument is the site secret.
+
+    If the messages is not for an SRS-encoded recipient the condition will
+    return false. If it is, the condition will return true and the variable
+    $srs_recipient will be set to the decoded (original) value.
+
+Example usage:
+
+  #macro
+  SRS_SECRET = <pick something unique for your site for this. Use on all MXs.>
+
+  #routers
+
+  outbound:
+    driver =    dnslookup
+    # if outbound, and forwarding has been done, use an alternate transport
+    domains =   ! +my_domains
+    transport = ${if eq {$local_part@$domain} \
+                        {$original_local_part@$original_domain} \
+                     {remote_smtp} {remote_forwarded_smtp}}
+
+  inbound_srs:
+    driver =    redirect
+    senders =   :
+    domains =   +my_domains
+    # detect inbound bounces which are SRS'd, and decode them
+    condition = ${if inbound_srs {$local_part} {SRS_SECRET}}
+    data =      $srs_recipient
+
+  inbound_srs_failure:
+    driver =    redirect
+    senders =   :
+    domains =   +my_domains
+    # detect inbound bounces which look SRS'd but are invalid
+    condition = ${if inbound_srs {$local_part} {}}
+    allow_fail
+    data =      :fail: Invalid SRS recipient address
+
+  #... further routers here
+
+  # transport; should look like the non-forward outbound
+  # one, plus the max_rcpt and return_path options
+  remote_forwarded_smtp:
+    driver =              smtp
+    # modify the envelope from, for mails that we forward
+    max_rcpt =            1
+    return_path =         ${srs_encode {SRS_SECRET} {$return_path} {$original_domain}}
+
+
+58.6 DMARC
+----------
+
+DMARC combines feedback from SPF, DKIM, and header From: in order to attempt to
+provide better indicators of the authenticity of an email. This document does
+not explain the fundamentals; you should read and understand how it works by
+visiting the website at http://www.dmarc.org/.
+
+If Exim is built with DMARC support, the libopendmarc library is used.
+
+For building Exim yourself, obtain the library from http://sourceforge.net/
+projects/opendmarc/ to obtain a copy, or find it in your favorite package
+repository. You will need to attend to the local/Makefile feature SUPPORT_DMARC
+and the associated LDFLAGS addition. This description assumes that headers will
+be in /usr/local/include, and that the libraries are in /usr/local/lib.
+
+There are three main-configuration options:
+
+The dmarc_tld_file option defines the location of a text file of valid top
+level domains the opendmarc library uses during domain parsing. Maintained by
+Mozilla, the most current version can be downloaded from a link at https://
+publicsuffix.org/list/public_suffix_list.dat. See also the util/
+renew-opendmarc-tlds.sh script. The default for the option is unset. If not
+set, DMARC processing is disabled.
+
+The dmarc_history_file option, if set defines the location of a file to log
+results of dmarc verification on inbound emails. The contents are importable by
+the opendmarc tools which will manage the data, send out DMARC reports, and
+expire the data. Make sure the directory of this file is writable by the user
+exim runs as. The default is unset.
+
+The dmarc_forensic_sender option defines an alternate email address to use when
+sending a forensic report detailing alignment failures if a sender domain's
+dmarc record specifies it and you have configured Exim to send them. If set,
+this is expanded and used for the From: header line; the address is extracted
+from it and used for the envelope from. If not set (the default), the From:
+header is expanded from the dsn_from option, and <> is used for the envelope
+from.
+
+By default, the DMARC processing will run for any remote, non-authenticated
+user. It makes sense to only verify DMARC status of messages coming from
+remote, untrusted sources. You can use standard conditions such as hosts,
+senders, etc, to decide that DMARC verification should *not* be performed for
+them and disable DMARC with an ACL control modifier:
+
+  control = dmarc_disable_verify
+
+A DMARC record can also specify a "forensic address", which gives exim an email
+address to submit reports about failed alignment. Exim does not do this by
+default because in certain conditions it results in unintended information
+leakage (what lists a user might be subscribed to, etc). You must configure
+exim to submit forensic reports to the owner of the domain. If the DMARC record
+contains a forensic address and you specify the control statement below, then
+exim will send these forensic emails. It is also advised that you configure a 
+dmarc_forensic_sender because the default sender address construction might be
+inadequate.
+
+  control = dmarc_enable_forensic
+
+(AGAIN: You can choose not to send these forensic reports by simply not putting
+the dmarc_enable_forensic control line at any point in your exim config. If you
+don't tell exim to send them, it will not send them.)
+
+There are no options to either control. Both must appear before the DATA acl.
+
+DMARC checks cam be run on incoming SMTP messages by using the "dmarc_status"
+ACL condition in the DATA ACL. You are required to call the "spf" condition
+first in the ACLs, then the "dmarc_status" condition. Putting this condition in
+the ACLs is required in order for a DMARC check to actually occur. All of the
+variables are set up before the DATA ACL, but there is no actual DMARC check
+that occurs until a "dmarc_status" condition is encountered in the ACLs.
+
+The "dmarc_status" condition takes a list of strings on its right-hand side.
+These strings describe recommended action based on the DMARC check. To
+understand what the policy recommendations mean, refer to the DMARC website
+above. Valid strings are:
+
+    accept     The DMARC check passed and the library recommends accepting the
+               email
+    reject     The DMARC check failed and the library recommends rejecting the
+               email
+    quarantine The DMARC check failed and the library recommends keeping it for
+               further inspection
+    none       The DMARC check passed and the library recommends no specific
+               action, neutral
+    norecord   No policy section in the DMARC record for this RFC5322.From
+               field
+    nofrom     Unable to determine the domain of the sender
+    temperror  Library error or dns error
+    off        The DMARC check was disabled for this email
+
+You can prefix each string with an exclamation mark to invert its meaning, for
+example "!accept" will match all results but "accept". The string list is
+evaluated left-to-right in a short-circuit fashion. When a string matches the
+outcome of the DMARC check, the condition succeeds. If none of the listed
+strings matches the outcome of the DMARC check, the condition fails.
+
+Of course, you can also use any other lookup method that Exim supports,
+including LDAP, Postgres, MySQL, etc, as long as the result is a list of
+colon-separated strings.
+
+Performing the check sets up information used by the authresults expansion
+item.
+
+Several expansion variables are set before the DATA ACL is processed, and you
+can use them in this ACL. The following expansion variables are available:
+
+$dmarc_status
+
+    A one word status indicating what the DMARC library thinks of the email. It
+    is a combination of the results of DMARC record lookup and the SPF/DKIM/
+    DMARC processing results (if a DMARC record was found). The actual policy
+    declared in the DMARC record is in a separate expansion variable.
+
+$dmarc_status_text
+
+    Slightly longer, human readable status.
+
+$dmarc_used_domain
+
+    The domain which DMARC used to look up the DMARC policy record.
+
+$dmarc_domain_policy
+
+    The policy declared in the DMARC record. Valid values are "none", "reject"
+    and "quarantine". It is blank when there is any error, including no DMARC
+    record.
+
+By default, Exim's DMARC configuration is intended to be non-intrusive and
+conservative. To facilitate this, Exim will not create any type of logging
+files without explicit configuration by you, the admin. Nor will Exim send out
+any emails/reports about DMARC issues without explicit configuration by you,
+the admin (other than typical bounce messages that may come about due to ACL
+processing or failure delivery issues).
+
+In order to log statistics suitable to be imported by the opendmarc tools, you
+need to:
+
+  * Configure the global option dmarc_history_file
+
+  * Configure cron jobs to call the appropriate opendmarc history import
+    scripts and truncating the dmarc_history_file
+
+In order to send forensic reports, you need to:
+
+  * Configure the global option dmarc_forensic_sender
+
+  * Configure, somewhere before the DATA ACL, the control option to enable
+    sending DMARC forensic reports
+
+Example usage:
+
+(RCPT ACL)
+  warn    domains        = +local_domains
+          hosts          = +local_hosts
+          control        = dmarc_disable_verify
+
+  warn    !domains       = +screwed_up_dmarc_records
+          control        = dmarc_enable_forensic
+
+  warn    condition      = (lookup if destined to mailing list)
+          set acl_m_mailing_list = 1
+
+(DATA ACL)
+  warn    dmarc_status   = accept : none : off
+          !authenticated = *
+          log_message    = DMARC DEBUG: $dmarc_status $dmarc_used_domain
+
+  warn    dmarc_status   = !accept
+          !authenticated = *
+          log_message    = DMARC DEBUG: '$dmarc_status' for $dmarc_used_domain
+
+  warn    dmarc_status   = quarantine
+          !authenticated = *
+          set $acl_m_quarantine = 1
+          # Do something in a transport with this flag variable
+
+  deny    condition      = ${if eq{$dmarc_domain_policy}{reject}}
+          condition      = ${if eq{$acl_m_mailing_list}{1}}
+          message        = Messages from $dmarc_used_domain break mailing lists
+
+  deny    dmarc_status   = reject
+          !authenticated = *
+          message        = Message from $dmarc_used_domain failed sender's DMARC policy, REJECT
+
+  warn    add_header     = :at_start:${authresults {$primary_hostname}}
+
+
+
+===============================================================================
+59. PROXIES
+
+A proxy is an intermediate system through which communication is passed.
+Proxies may provide a security, availability or load-distribution function.
+
+
+59.1 Inbound proxies
+--------------------
+
+Exim has support for receiving inbound SMTP connections via a proxy that uses
+"Proxy Protocol" to speak to it. To include this support, include
+"SUPPORT_PROXY=yes" in Local/Makefile.
+
+It was built on the HAProxy specification, found at https://www.haproxy.org/
+download/1.8/doc/proxy-protocol.txt.
+
+The purpose of this facility is so that an application load balancer, such as
+HAProxy, can sit in front of several Exim servers to distribute load. Exim uses
+the local protocol communication with the proxy to obtain the remote SMTP
+system IP address and port information. There is no logging if a host passes or
+fails Proxy Protocol negotiation, but it can easily be determined and recorded
+in an ACL (example is below).
+
+Use of a proxy is enabled by setting the hosts_proxy main configuration option
+to a hostlist; connections from these hosts will use Proxy Protocol. Exim
+supports both version 1 and version 2 of the Proxy Protocol and automatically
+determines which version is in use.
+
+The Proxy Protocol header is the first data received on a TCP connection and is
+inserted before any TLS-on-connect handshake from the client; Exim negotiates
+TLS between Exim-as-server and the remote client, not between Exim and the
+proxy server. The Proxy Protocol header must be received within 
+proxy_protocol_timeout, which defaults to 3s.
+
+The following expansion variables are usable ("internal" and "external" here
+refer to the interfaces of the proxy):
+
+    $proxy_external_address IP of host being proxied or IP of remote interface
+                            of proxy
+    $proxy_external_port    Port of host being proxied or Port on remote
+                            interface of proxy
+    $proxy_local_address    IP of proxy server inbound or IP of local interface
+                            of proxy
+    $proxy_local_port       Port of proxy server inbound or Port on local
+                            interface of proxy
+    $proxy_session          boolean: SMTP connection via proxy
+
+If $proxy_session is set but $proxy_external_address is empty there was a
+protocol error. The variables $sender_host_address and $sender_host_port will
+have values for the actual client system, not the proxy.
+
+Since the real connections are all coming from the proxy, and the per host
+connection tracking is done before Proxy Protocol is evaluated, 
+smtp_accept_max_per_host must be set high enough to handle all of the parallel
+volume you expect per inbound proxy. With the option set so high, you lose the
+ability to protect your server from many connections from one IP. In order to
+prevent your server from overload, you need to add a per connection ratelimit
+to your connect ACL. A possible solution is:
+
+  # Set max number of connections per host
+  LIMIT   = 5
+  # Or do some kind of IP lookup in a flat file or database
+  # LIMIT = ${lookup{$sender_host_address}iplsearch{/etc/exim/proxy_limits}}
+
+  defer   ratelimit      = LIMIT / 5s / per_conn / strict
+          message        = Too many connections from this IP right now
+
+
+59.2 Outbound proxies
+---------------------
+
+Exim has support for sending outbound SMTP via a proxy using a protocol called
+SOCKS5 (defined by RFC1928). The support can be optionally included by defining
+SUPPORT_SOCKS=yes in Local/Makefile.
+
+Use of a proxy is enabled by setting the socks_proxy option on an smtp
+transport. The option value is expanded and should then be a list
+(colon-separated by default) of proxy specifiers. Each proxy specifier is a
+list (space-separated by default) where the initial element is an IP address
+and any subsequent elements are options.
+
+Options are a string <name>=<value>. The list of options is in the following
+table:
+
+    auth   authentication method
+    name   authentication username
+    pass   authentication password
+    port   tcp port
+    tmo    connection timeout
+    pri    priority
+    weight selection bias
+
+More details on each of these options follows:
+
+  * auth: Either "none" (default) or "name". Using "name" selects username/
+    password authentication per RFC 1929 for access to the proxy. Default is
+    "none".
+
+  * name: sets the username for the "name" authentication method. Default is
+    empty.
+
+  * pass: sets the password for the "name" authentication method. Default is
+    empty.
+
+  * port: the TCP port number to use for the connection to the proxy. Default
+    is 1080.
+
+  * tmo: sets a connection timeout in seconds for this proxy. Default is 5.
+
+  * pri: specifies a priority for the proxy within the list, higher values
+    being tried first. The default priority is 1.
+
+  * weight: specifies a selection bias. Within a priority set servers are
+    queried in a random fashion, weighted by this value. The default value for
+    selection bias is 1.
+
+Proxies from the list are tried according to their priority and weight settings
+until one responds. The timeout for the overall connection applies to the set
+of proxied attempts.
+
+
+59.3 Logging
+------------
+
+To log the (local) IP of a proxy in the incoming or delivery logline, add
+"+proxy" to the log_selector option. This will add a component tagged with "PRX
+=" to the line.
+
+
+
+===============================================================================
+60. INTERNATIONALISATION
+
+Exim has support for Internationalised mail names. To include this it must be
+built with SUPPORT_I18N and the libidn library. Standards supported are RFCs
+2060, 5890, 6530 and 6533.
+
+If Exim is built with SUPPORT_I18N_2008 (in addition to SUPPORT_I18N, not
+instead of it) then IDNA2008 is supported; this adds an extra library
+requirement, upon libidn2.
+
+
+60.1 MTA operations
+-------------------
+
+The main configuration option smtputf8_advertise_hosts specifies a host list.
+If this matches the sending host and accept_8bitmime is true (the default) then
+the ESMTP option SMTPUTF8 will be advertised.
+
+If the sender specifies the SMTPUTF8 option on a MAIL command international
+handling for the message is enabled and the expansion variable
+$message_smtputf8 will have value TRUE.
+
+The option allow_utf8_domains is set to true for this message. All DNS lookups
+are converted to a-label form whatever the setting of allow_utf8_domains when
+Exim is built with SUPPORT_I18N.
+
+Both localparts and domain are maintained as the original UTF-8 form
+internally; any comparison or regular-expression use will require appropriate
+care. Filenames created, eg. by the appendfile transport, will have UTF-8
+names.
+
+HELO names sent by the smtp transport will have any UTF-8 components expanded
+to a-label form, and any certificate name checks will be done using the a-label
+form of the name.
+
+Log lines and Received-by: header lines will acquire a "utf8" prefix on the
+protocol element, eg. utf8esmtp.
+
+The following expansion operators can be used:
+
+${utf8_domain_to_alabel:str}
+${utf8_domain_from_alabel:str}
+${utf8_localpart_to_alabel:str}
+${utf8_localpart_from_alabel:str}
+
+The RCPT ACL may use the following modifier:
+
+control = utf8_downconvert
+control = utf8_downconvert/<value>
+
+This sets a flag requiring that envelope addresses are converted to a-label
+form before smtp delivery. This is usually for use in a Message Submission
+Agent context, but could be used for any message.
+
+If a value is appended it may be:
+
+     "1" mandatory downconversion
+     "0" no downconversion
+    "-1" if SMTPUTF8 not supported by destination host
+
+If no value is given, 1 is used.
+
+If mua_wrapper is set, the utf8_downconvert control is initially set to -1.
+
+The smtp transport has an option utf8_downconvert. If set it must expand to one
+of the three values described above, or an empty string. If non-empty it
+overrides value previously set (due to mua_wrapper or by an ACL control).
+
+There is no explicit support for VRFY and EXPN. Configurations supporting these
+should inspect $smtp_command_argument for an SMTPUTF8 argument.
+
+There is no support for LMTP on Unix sockets. Using the "lmtp" protocol option
+on an smtp transport, for LMTP over TCP, should work as expected.
+
+There is no support for DSN unitext handling, and no provision for converting
+logging from or to UTF-8.
+
+
+60.2 MDA operations
+-------------------
+
+To aid in constructing names suitable for IMAP folders the following expansion
+operator can be used:
+
+${imapfolder {<string>} {<sep>} {<specials>}}
+
+The string is converted from the charset specified by the "headers charset"
+command (in a filter file) or headers_charset main configuration option
+(otherwise), to the modified UTF-7 encoding specified by RFC 2060, with the
+following exception: All occurrences of <sep> (which has to be a single
+character) are replaced with periods ("."), and all periods and slashes that
+are not <sep> and are not in the <specials> string are BASE64 encoded.
+
+The third argument can be omitted, defaulting to an empty string. The second
+argument can be omitted, defaulting to "/".
+
+This is the encoding used by Courier for Maildir names on disk, and followed by
+many other IMAP servers.
+
+Examples:
+
+${imapfolder {Foo/Bar}}        yields Foo.Bar
+${imapfolder {Foo/Bar}{.}{/}}  yields Foo&AC8-Bar
+${imapfolder {R?ksm?rg?s}}     yields R&AOQ-ksm&APY-rg&AOU-s
+
+Note that the source charset setting is vital, and also that characters must be
+representable in UTF-16.
+
+
+
+===============================================================================
+61. EVENTS
+
+The events mechanism in Exim can be used to intercept processing at a number of
+points. It was originally invented to give a way to do customised logging
+actions (for example, to a database) but can also be used to modify some
+processing actions.
+
+Most installations will never need to use Events. The support can be left out
+of a build by defining DISABLE_EVENT=yes in Local/Makefile.
+
+There are two major classes of events: main and transport. The main
+configuration option event_action controls reception events; a transport option
+event_action controls delivery events.
+
+Both options are a string which is expanded when the event fires. An example
+might look like:
+
+event_action = ${if eq {msg:delivery}{$event_name} \
+{${lookup pgsql {SELECT * FROM record_Delivery( \
+    '${quote_pgsql:$sender_address_domain}',\
+    '${quote_pgsql:${lc:$sender_address_local_part}}', \
+    '${quote_pgsql:$domain}', \
+    '${quote_pgsql:${lc:$local_part}}', \
+    '${quote_pgsql:$host_address}', \
+    '${quote_pgsql:${lc:$host}}', \
+    '${quote_pgsql:$message_exim_id}')}} \
+} {}}
+
+Events have names which correspond to the point in process at which they fire.
+The name is placed in the variable $event_name and the event action expansion
+must check this, as it will be called for every possible event type.
+
+The current list of events is:
+
++-----------------------------------------------------------------------------+
+|    dane:fail          |after |transport|per connection                      |
+|-----------------------+------+---------+------------------------------------|
+|    msg:complete       |after |  main   |per message                         |
+|-----------------------+------+---------+------------------------------------|
+|    msg:defer          |after |transport|per message per delivery try        |
+|-----------------------+------+---------+------------------------------------|
+|    msg:delivery       |after |transport|per recipient                       |
+|-----------------------+------+---------+------------------------------------|
+|    msg:rcpt:host:defer|after |transport|per recipient per host              |
+|-----------------------+------+---------+------------------------------------|
+|    msg:rcpt:defer     |after |transport|per recipient                       |
+|-----------------------+------+---------+------------------------------------|
+|    msg:host:defer     |after |transport|per host per delivery try; host     |
+|                       |      |         |errors                              |
+|-----------------------+------+---------+------------------------------------|
+|    msg:fail:delivery  |after |transport|per recipient                       |
+|-----------------------+------+---------+------------------------------------|
+|    msg:fail:internal  |after |  main   |per recipient                       |
+|-----------------------+------+---------+------------------------------------|
+|    tcp:connect        |before|transport|per connection                      |
+|-----------------------+------+---------+------------------------------------|
+|    tcp:close          |after |transport|per connection                      |
+|-----------------------+------+---------+------------------------------------|
+|    tls:cert           |before|  both   |per certificate in verification     |
+|                       |      |         |chain                               |
+|-----------------------+------+---------+------------------------------------|
+|    tls:fail:connect   |after |  main   |per connection                      |
+|-----------------------+------+---------+------------------------------------|
+|    smtp:connect       |after |transport|per connection                      |
+|-----------------------+------+---------+------------------------------------|
+|    smtp:ehlo          |after |transport|per connection                      |
++-----------------------------------------------------------------------------+
+
+New event types may be added in future.
+
+The event name is a colon-separated list, defining the type of event in a tree
+of possibilities. It may be used as a list or just matched on as a whole. There
+will be no spaces in the name.
+
+The second column in the table above describes whether the event fires before
+or after the action is associates with. Those which fire before can be used to
+affect that action (more on this below).
+
+The third column in the table above says what section of the configuration
+should define the event action.
+
+An additional variable, $event_data, is filled with information varying with
+the event type:
+
++-------------------------------------------------+
+|    dane:fail          |failure reason           |
+|-----------------------+-------------------------|
+|    msg:defer          |error string             |
+|-----------------------+-------------------------|
+|    msg:delivery       |smtp confirmation message|
+|-----------------------+-------------------------|
+|    msg:fail:internal  |failure reason           |
+|-----------------------+-------------------------|
+|    msg:fail:delivery  |smtp error message       |
+|-----------------------+-------------------------|
+|    msg:host:defer     |error string             |
+|-----------------------+-------------------------|
+|    msg:rcpt:host:defer|error string             |
+|-----------------------+-------------------------|
+|    msg:rcpt:defer     |error string             |
+|-----------------------+-------------------------|
+|    tls:cert           |verification chain depth |
+|-----------------------+-------------------------|
+|    tls:fail:connect   |error string             |
+|-----------------------+-------------------------|
+|    smtp:connect       |smtp banner              |
+|-----------------------+-------------------------|
+|    smtp:ehlo          |smtp ehlo response       |
++-------------------------------------------------+
+
+The :defer events populate one extra variable: $event_defer_errno.
+
+For complex operations an ACL expansion can be used in event_action, however
+due to the multiple contexts that Exim operates in during the course of its
+processing:
+
+  * variables set in transport events will not be visible outside that
+    transport call
+
+  * acl_m variables in a server context are lost on a new connection, and after
+    smtp helo/ehlo/mail/starttls/rset commands
+
+Using an ACL expansion with the logwrite modifier can be a useful way of
+writing to the main log.
+
+The expansion of the event_action option should normally return an empty
+string. Should it return anything else the following will be forced:
+
++------------------------------------+
+|    tcp:connect |do not connect     |
+|----------------+-------------------|
+|    tls:cert    |refuse verification|
+|----------------+-------------------|
+|    smtp:connect|close connection   |
++------------------------------------+
+
+All other message types ignore the result string, and no other use is made of
+it.
+
+For a tcp:connect event, if the connection is being made to a proxy then the
+address and port variables will be that of the proxy and not the target system.
+
+For tls:cert events, if GnuTLS is in use this will trigger only per chain
+element received on the connection. For OpenSSL it will trigger for every chain
+element including those loaded locally.
+
+
+
+===============================================================================
+62. ADDING NEW DRIVERS OR LOOKUP TYPES
+
+The following actions have to be taken in order to add a new router, transport,
+authenticator, or lookup type to Exim:
+
+ 1. Choose a name for the driver or lookup type that does not conflict with any
+    existing name; I will use "newdriver" in what follows.
+
+ 2. Add to src/EDITME the line:
+
+    <type>_NEWDRIVER=yes
+
+    where <type> is ROUTER, TRANSPORT, AUTH, or LOOKUP. If the code is not to
+    be included in the binary by default, comment this line out. You should
+    also add any relevant comments about the driver or lookup type.
+
+ 3. Add to src/config.h.defaults the line:
+
+    #define <type>_NEWDRIVER
+
+ 4. Edit src/drtables.c, adding conditional code to pull in the private header
+    and create a table entry as is done for all the other drivers and lookup
+    types.
+
+ 5. Edit scripts/lookups-Makefile if this is a new lookup; there is a for-loop
+    near the bottom, ranging the "name_mod" variable over a list of all
+    lookups. Add your "NEWDRIVER" to that list. As long as the dynamic module
+    would be named newdriver.so, you can use the simple form that most lookups
+    have.
+
+ 6. Edit Makefile in the appropriate sub-directory (src/routers, src/transports
+    , src/auths, or src/lookups); add a line for the new driver or lookup type
+    and add it to the definition of OBJ.
+
+ 7. Edit OS/Makefile-Base adding a .o file for the predefined-macros, to the
+    definition of OBJ_MACRO. Add a set of line to do the compile also.
+
+ 8. Create newdriver.h and newdriver.c in the appropriate sub-directory of src.
+
+ 9. Edit scripts/MakeLinks and add commands to link the .h and .c files as for
+    other drivers and lookups.
+
+Then all you need to do is write the code! A good way to start is to make a
+proforma by copying an existing module of the same type, globally changing all
+occurrences of the name, and cutting out most of the code. Note that any
+options you create must be listed in alphabetical order, because the tables are
+searched using a binary chop procedure.
+
+There is a README file in each of the sub-directories of src describing the
+interface that is expected.
+