From e90fcc54809db2591dc083f43ef54c6ec8c60847 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 18:16:13 +0200 Subject: Adding upstream version 4.96. Signed-off-by: Daniel Baumann --- doc/Exim3.upgrade | 671 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 671 insertions(+) create mode 100644 doc/Exim3.upgrade (limited to 'doc/Exim3.upgrade') diff --git a/doc/Exim3.upgrade b/doc/Exim3.upgrade new file mode 100644 index 0000000..4ab94c4 --- /dev/null +++ b/doc/Exim3.upgrade @@ -0,0 +1,671 @@ +This document contains information about upgrading Exim to the last of the 3.xx +releases. It is provided to help anybody who is upgrading to release 4.xx from +a release that is earlier than 3.33. It goes back as far as release 2.12. If +you are upgrading to release 4.xx from an even earlier release, it is probably +best to start again from the default configuration. + + +Upgrading from release 3.16 +--------------------------- + +1. The way LDAP returns values for multiple attributes has been changed to be +the same as the NIS+ lookup. + +If you specify multiple attributes, they are returned as space-separated +strings, quoted if necessary. + +e.g. ldap:///o=base?attr1,attr2?sub?(uid=fred) + + used to give: attr1=value one, attr2=value2 + now gives: attr1="value one" attr2=value2 + +If you don't specify any attributes in the search, you now get them in +the tagged format as well. + +e.g. ldap:///o=base??sub?(uid=fred) + + used to give: top, value one, value2 + now gives: objectClass=top attr1="value one" attr2=value2 + +The reason for these changes is so that the results can be safely parsed - +in fact, the existing ${extract{key}{val}} function does this nicely. +This in turn allows a single LDAP query to be reused - one query can return +the destination delivery address, the quota, and so forth. + +This is NOT a backwards compatible change, so there is a compile-time option +to reverse it in the src/lookups/ldap.c module, for use in emergency. But it is +not thought that the old behaviour was particularly useful as it stood, because +a field that contained ',' or '=' would make the result unparseable. + +In the common case where you explicitly ask for a single attribute in your +LDAP query, the behaviour is unchanged - the result is not quoted, and if there +are multiple values they are comma-separated. + +2. The hosts_max_try option in the smtp transport limits the number of IP +addresses that will actually be tried during one delivery attempt. The default +is 5. Previously, all available addresses were tried. + +3. The extension of the "extract" expansion item has resulted in a change to +the way Exim decides between the keyed form and the numeric form. If the first +argument consists entirely of digits, the numeric form is assumed. This means +that it is impossible to have keys that are digit strings, without manipulating +the data first (e.g. by using ${sg} to add a letter to each key). + + +Upgrading from release 3.15 +--------------------------- + +1. The handling of "freeze" and "fail" in system filter files has changed. +Previously, any deliveries set up by a filter that ended with "freeze" or +"fail" were discarded. This no longer happens; such deliveries are honoured. +A consequence of this is that first_delivery becomes false after freezing in a +system filter; previously it remained true until a real delivery attempt +happened. + + +Upgrading from release 3.13 +--------------------------- + +1. The handling of maildir_tag has been changed (see NewStuff). There are two +small incompatibilities: (a) Exim now inserts a leading colon only if the +string begins with an alphanumeric character. So if you were using a string +starting with a special character, you will have to add the leading colon to +it to remain compatible. (b) The expansion of maildir_tag now happens after the +file has been written, and $message_size is updated to the correct file size +before the expansion. The tag is not used on the temporary file (it was +previously). + +2. The handling of Exim's configuration has changed in two ways: + + (a) Any line may be continued by ending it with a backslash. Trailing white + space after the backslash, and leading white space on continuation lines is + ignored. This means that quotes are no longer needed just to make it possible + to continue an option setting. The difference between quoted and non-quoted + strings is that quoted strings are processed for internal backslashed items + such as \n. The only possible incompatibility of this change is if any + existing configuration has a non-quoted line ended in backslash, which seems + a very remote possibility. + + (b) All lists, with the exception of log_file_path, can now use a different + character to colon as the separator. This is specified by starting the list + with /opt/exim/configure.new + +The way the script merges an accept/reject/reject_except triple into a single +accept option is to put the reject_except list first, followed by the reject +list with every item negated, followed by the accept list. For example, if an +old configuration file contains + + sender_host_accept_relay = *.c.d : e.f.g + sender_host_reject_relay = *.b.c.d + sender_host_reject_relay_except = a.b.c.d + +the new configuration will contain + + host_accept_relay = a.b.c.d : ! *.b.c.d : *.c.d : e.f.g + +The same ordering is used to merge a triple into a reject option, but this time +the first and third sublists are negated. For example, if an old configuration +file contains + + sender_host_accept = *.c.d : e.f.g + sender_host_reject = *.b.c.d + sender_host_reject_except = a.b.c.d + +the new configuration file will contain + + host_reject = ! a.b.c.d : *.b.c.d : ! *.c.d : ! e.f.g : * + +The output file should be checked before trying to use it. Each option change +is preceded by an identifying comment. There are several specific things that +you should look out for when checking: + +(1) If you are using macros to contain lists of items, and these have to be + negated in the new world, convert4r3 won't get it right. For example, if + the old configuration contains + + ACCEPTHOSTS = *.c.d : e.f.g + sender_host_reject = ACCEPTHOSTS + + then the rewritten configuration will be + + ACCEPTHOSTS = *.c.d : e.f.g + host_reject = !ACCEPTHOSTS + + but because this is just textual macro handling, that is equivalent to + + host_reject = !*.c.d : e.f.g + + which is not the correct translation, because the second item is not + negated. There is unfortunately no easy way to use a macro to provide a + list of things that are sometimes negated. + +(2) The conversion adds some settings of file_transport, pipe_transport, and + reply_transport to aliasfile and forwardfile directors. This is done + because the global implicit defaults for these options have been removed. + The default configuration now contains explicit settings, so convert4r3 + makes these additions to be compatible with that. If your aliasfile and + forwardfile directors do not make use of the pipe, file, or autoreply + facilities, you can remove these new settings. + +(3) If you are using +allow_unknown in a host list which also has an exception + list, you may need to move +allow_unknown in the new configuration. For + example, if the old configuration contains + + sender_host_reject = +allow_unknown : *.b.c + sender_host_reject_except = *.a.b.c + + then the rewritten configuration will be + + host_reject = ! *.a.b.c : +allow_unknown : *.b.c + + Because the negated item contains a wild card, the reverse lookup for the + host name will occur before +allow_unknown is encountered, and therefore + +allow_unknown will have no effect. It should be moved to the start of the + list. + +One way of upgrading Exim from a pre-3.00 release to a post-3.00 release is as +follows: + +1. Suppose your configuration file is called /opt/exim/configure, and you want + to continue with this name after upgrading. The first thing to do is to make + another copy of this file called, say, /opt/exim/configure.pre-3.00. + +2. Rebuild your existing Exim to use the copy of the configuration file instead + of the standard file. Install this version of Exim under a special name such + as exim-2.12, and point a symbolic link called "exim" at it. Then HUP your + daemon. You can check on the name of the configuration file by running + + exim -bP configure_file + + Ensure that everything is running smoothly. + +3. Build the new release, configured to use the standard configuration file. + +4. Use the convert4r3 utility to upgrade your configuration file for the new + release. After running it, check the file by hand. + +5. If any of the options that convert4r3 rewrote contained regular expressions + that had backslashes in them, and were not previously in quotes, they will + need modification if convert4r3 has put them into quotes. Either re-arrange + the option to remove the quoting, or escape each backslash. For example, if + you had + + sender_reject_recipients = ^\d{8}@ + sender_reject_except = ^\d{8}@x.y.z + + convert4r3 will have combined the two settings into + + sender_reject_recipients = "! ^\d{8}@x.y.z : \ + ^\d{8}@" + + This must be changed to + + sender_reject_recipients = ! ^\d{8}@x.y.z : ^\d{8}@ + or + sender_reject_recipients = "! ^\\d{8}@x.y.z : ^\\d{8}@" + + In the second case, the quoted string could of course still be split + over several lines. + +6. If your configuration refers to any external lists of networks, check them + to ensure that all the masks are in the single-number form, because Exim no + longer recognizes the dotted quad form of mask. For example, if an item in + a netlist file is + + 131.111.8.0/255.255.255.0 + + you must change it to + + 131.111.8.0/24 + + Otherwise Exim will not recognize it as a masked IP address, and will treat + it as a host name. The convert4r3 utility makes this conversion for networks + that are mentioned inline in the configuration, but it does not handle + referenced files. + +7. Check the newly-built Exim as much as possible without installing; you can, + for example, use a command such as + + ./exim -bV + + in the build directory to test that it successfully reads the new + configuration file. You can also do tests using -bt and -bh. + +8. Install the new release under a special name such as exim-3.00. + +9. You can then easily change between the new and old releases simply by moving + the symbolic link and HUPping your daemon. + + +Details of syntax changes at 3.00 +================================= + +1. A bare file name without a preceding search type may appear in a domain +list; this causes each line of the file to be read and processed as if it were +an item in the list, except that it cannot itself be a bare file name (that is, +this facility cannot be used recursively). Wild cards and regular expressions +may be used in the lines of the file just as in the main list. +For example, if + + local_domains = /etc/local-domains + +then the file could contain lines like + + *.mydomain.com + +This is different to an lsearch file, which operates like any other lookup type +and does an exact search for the key. If a # character appears anywhere in a +line of the file, it and all following characters are ignored. Blank lines are +also ignored. + +2. Any item in a domain list (including a bare file name) can be preceded by an +exclamation mark character, to indicate negation. White space after the ! is +ignored. If the domain matches the rest of the item, it is *not* in the set of +domains that the option is defining. If the end of the list is reached, the +domain is accepted if the last item was a negative one, but not if it was a +positive one. If ! precedes a bare file name, then all items in the file are +negated, unless they are preceded by another exclamation mark. For example: + + relay_domains = !a.b.c : *.b.c + +sets up a.b.c as an exception to the more general item *.b.c, because lists are +processed from left to right. If the domain that is being checked matches +neither a.b.c nor *.b.c, then it is not accepted as a relay domain, because the +last item in the list is a positive item. However, if the option were just + + relay_domains = !a.b.c + +then all domains other than a.b.c would be relay domains, because the last item +in the list is a negative item. In effect, a list that ends with a negative +item has ": *" appended to it. + +3. Negation and bare file names are available as above in lists of local parts +(e.g. in local_parts options) and complete addresses (address lists). For the +special "@@" lookup form in address lists, negation also can be used in the +list of local parts that is looked up for the domain. For example, with + + sender_reject_recipients = @@dbm;/etc/reject-by-domain + +the file could contain lines like this: + + baddomain.com: !postmaster : !hostmaster : * + +If a local part that actually begins with ! is required, it has to be specified +using a regular expression. Because local parts may legitimately contain # +characters, a comment in the file is recognized only if # is followed by white +space or the end of the line. + +4. Host lists may now contain network items, as in the former net list options, +which have all been abolished. The only form of network masking is the /n +variety. Negation and bare file names can appear in host lists, and there is a +new type of item which allows masked network numbers to be used as keys in +lookups, thus making it possible to used DBM files for faster checking when the +list of networks is large. + +The complete list of types of item which can now appear in a host list is: + +. An item may be a bare file name; each line of the file may take the form of + any of the items below, but it may not itself be another bare file name. If + the file name is preceded by ! then all items in the file are negated, unless + they are preceded by another exclamation mark. Comments in the file are + introduced by # and blank lines are ignored. + +. If the entire item is "*" it matches any host. + +. If the item is in the form of an IP address, it is matched against the IP + address of the incoming call. + +. If the item is in the form of an IP address followed by a slash and a mask + length (e.g. 131.111.0.0/16) then it is matched against the IP address of the + incoming call, subject to the mask. + +. If the item is of the form "net-;", for + example: + + net24-dbm;/networks.db + + then the IP address of the incoming call is masked using as the mask + length; a textual string is then constructed from the masked value, followed + by the mask, and this is then used as the key for the lookup. For example, if + the incoming IP address is 192.152.34.6 then the key that is looked up for + the above example is "192.152.34.0/24". + +. If the entire item is "@" the primary host name is used as the the match + item, and the following applies: + +. If the item is a plain domain name, then a forward DNS lookup is done on that + name to find its IP address(es), and the result is compared with the IP + address of the incoming call. + +The remaining items require the host name to be obtained by a reverse DNS +lookup. If the lookup fails, Exim takes a hard line by default and access is +not permitted. If the list is an "accept" list, Exim behaves as if the current +host is not in the set defined by the list, whereas if it is a "reject" list, +it behaves as if it is. + +To change this behaviour, the special item "+allow_unknown" may appear in the +list (at top level - it is not recognized in an indirected file); if any +subsequent items require a host name, and the reverse DNS lookup fails, Exim +permits the access, that is, its behaviour is the opposite to the default. + +. If the item starts with "*" then the remainder of the item must match the end + of the host name. For example, *.b.c matches all hosts whose names end in + .b.c. This special simple form is provided because this is a very common + requirement. Other kinds of wildcarding require the use of a regular + expression. + +. If the item starts with "^" then it is taken to be a regular expression which + is matched against the host name. For example, ^(a|b)\.c\.d$ matches either + of the two hosts a.c.d or b.c.d. If the option string in which this occurs is + given in quotes, then the backslash characters must be doubled, because they + are significant in quoted strings. The following two settings are exactly + equivalent: + + host_accept = ^(a|b)\.c\.d$ + host_accept = "^(a|b)\\.c\\.d$" + +. If the item is of the form ;, for example + + dbm;/host/accept/list + + then the host name is looked up using the search type and file name or query + (as appropriate). The actual data that is looked up is not used. + +5. Early versions of Exim required commas and semicolons to terminate option +settings in drivers. This hasn't been the case for quite some time. The code to +handle them has now been removed. + + +Details of option changes at 3.00 +================================= + +Main options +------------ + + * address_directory_transport, address_directory2_transport, + address_file_transport, address_pipe_transport, and address_reply_transport + have been abolished as obsolete. The aliasfile and forwardfile directors + have been able for some time to set the transports they want to use for + these special kinds of delivery; there seems little need for global + defaults. The default configuration has been altered to add settings for + file_transport and pipe_transport to the aliasfile and forwardfile + directors, and to add reply_transport to forwardfile. + + * check_dns_names, a deprecated synonym for dns_check_names, has been + abolished. + + * helo_accept_junk_nets is abolished; nets can now appear in + helo_accept_junk_hosts. + + * helo_verify_except_hosts and helo_verify_except_nets have been abolished, + and helo_verify has been changed from a boolean to a host list, listing + those hosts for which HELO verification is required. + + * the obsolete option helo_verify_nets (a synonym for host_lookup_nets) has + been abolished. Note that host_lookup_nets itself has been replaced by + host_lookup. + + * hold_domains_except has been abolished. Use negated items in hold_domains. + + * host_lookup_nets has been replaced by host_lookup, which can contain hosts + and nets. + + * ignore_fromline_nets has been replaced by ignore_fromline_hosts. + + * If message_filter is set and the filter generates any deliveries to files, + pipes, or any autoreplies, then the appropriate message_filter_*_transport + options must be set to define the transports, following the abolition of + the global defaults (see above). + + * queue_remote and queue_remote_except have been abolished and replaced by + queue_remote_domains, which lists those domains that should be queued. The + effect of queue_remote=true is now obtained by queue_remote_domains=*. + + * queue_smtp and queue_smtp_except have been abolished and replaced by + queue_smtp_domains, which lists those domains that should be queued after + routing. The effect of queue_smtp=true is now obtained by + queue_smtp_domains=*. + + * rbl_except_nets has been abolished and replaced by rbl_hosts, which can + contain hosts and nets. This defaults to "*" and defines the set of hosts + for which RBL checking is done. + + * receiver_unqualified_nets is abolished; nets can now appear in + receiver_unqualified_hosts. + + * receiver_verify_except_hosts and receiver_verify_except_nets have been + abolished and replaced by receiver_verify_hosts, which defaults to "*". + This is used, however, only when receiver_verify is set - together with the + other conditions (receiver_verify_addresses, receiver_verify_senders). + + * receiver_verify_senders_except has been abolished; the functionality is now + available by using negation in receiver_verify_senders. + + * rfc1413_except_hosts and rfc1413_except_nets have been abolished, and + replaced by rfc1413_hosts, which defaults to "*". + + * sender_accept, sender_accept_recipients and sender_reject_except have + been abolished; the functionality is now available via sender_reject and + sender_reject_recipients. + + * sender_host_accept, sender_net_accept, sender_host_reject, + sender_net_reject, sender_host_reject_except, sender_net_reject_except, + sender_host_reject_recipients and sender_net_reject_recipients + have all been abolished, and replaced by the options host_reject and + host_reject_recipients. + + * sender_host_accept_relay, sender_net_accept_relay, + sender_host_reject_relay, sender_host_reject_relay_except, + sender_net_reject_relay, and sender_net_reject_relay_except are abolished, + and replaced by host_accept_relay. This defaults unset, and this means that + all relaying is now by default locked out in the Exim binary. Previously, + if no relaying options were set, relaying was permitted. + + * sender_unqualified_nets has been abolished; nets can now appear in + sender_unqualified_hosts. + + * sender_verify_except_hosts and sender_verify_except_nets have been + abolished and replaced by sender_verify_hosts, which defaults to "*". This + is used, however, only when sender_verify is set (to make it similar to + receiver_verify, even though there aren't at present any other conditions.) + + * sender_verify_log_details has been abolished. This was a little-used + debugging option. + + * smtp_etrn_nets has been abolished; nets can now appear in smtp_etrn_hosts. + + * smtp_expn_nets has been abolished; nets can now appear in smtp_expn_hosts. + + * smtp_log_connections, a deprecated synonym for log_smtp_connections, has + been abolished. + + * smtp_reserve_nets is abolished; nets can now appear in smtp_reserve_hosts. + +Generic director and router options +----------------------------------- + + * except_domains, except_local_parts, and except_senders have been abolished. + Use negated items in domains, local_parts, and senders instead, for + example, replace + + except_domains = a.b.c + + with + + domains = !a.b.c + + If you already have a domains setting, add any negative items to the front + of it. + +The aliasfile director +---------------------- + + * The option "directory", an obsolete synonym for home_directory, has been + abolished. + +The forwardfile director +------------------------ + + * The option "directory", an obsolete synonym for file_directory, has been + abolished. + + * The option forbid_filter_log, an obsolete synonym for + forbid_filter_logwrite, has been abolished. + +The localuser director +---------------------- + + * The option "directory", an obsolete synonym for match_directory, has been + abolished. + +The lookuphost router +--------------------- + + * mx_domains_except and its obsolete old name non_mx_domains have been + abolished. Use negated items in mx_domains. + +The pipe transport +------------------ + + * The option "directory", an obsolete synonym for home_directory, has been + abolished. + +The smtp transport +------------------ + + * mx_domains_except and its obsolete old name non_mx_domains have been + abolished. Use negated items in mx_domains. + + * serialize_nets has been abolished; nets may now appear in serialize_hosts. + + +Other items relevant to upgrading from Exim 2.12 +================================================ + +1. RFC 2505 (Anti-Spam Recommendations for SMTP MTAs) recommends that the +checking of addresses for spam blocks should be done entirely caselessly. +Previously, although Exim retained the case of the local part, in accordance +with the RFC 821 rule that local parts are case sensitive, some of the string +comparisons were nevertheless done caselessly, but file lookups used the +unmodified address. + +The way addresses are compared with options whose values are address lists has +been changed. At the start of the comparison, both the local part and the +domain are now forced to lower case, and any comparisons that are done with +in-line strings are done caselessly. For example, + + sender_reject = A@b.c + +rejects both A@b.c and a@b.c. Any lookups that occur use lowercased strings as +their keys. If the @@ lookup facility is used, the lookup is done on the lower +cased domain name, but any subsequent string comparisons on local parts are +done caselessly. + +To retain possibility of caseful matching, the pseudo-item "+caseful" can +appear in an address list. It causes any subsequent items to do caseful matches +on local parts. The domain, however, remains lower cased. + +2. The handling of incoming batched SMTP has been re-worked so as to behave in +a more useful way in cases of error: + + (i) The option sender_verify_batch now defaults false. + (ii) EOF is no longer interpreted as end-of-message; the "." line must be + present. + (iii) Exim stops immediately in cases of error, writing information to stdout + and stderr, and setting the return code to 1 if some messages have been + accepted, and 2 otherwise. + +3. The first message delivered by -R, and all messages delivered by -Rf and -qf +are "forced" in the sense that retry information is over-ridden. Previously, +Exim also forcibly thawed any of these messages that was frozen. This no longer +happens. Additional options -Rff and -qff have been implemented to force +thawing as well as delivery. + +4. When recipients are being rejected because the sending host is in an RBL +list, Exim used just to show the RBL text, if any, as part of the rejection +response. Now, if prohibition_message is set, it expands that string instead, +with the RBL message available in $rbl_text, and $prohibition_reason set to +"rbl_reject". + +5. When a trusted caller passed a message to Exim, it used to check the From: +header against the caller's login (even though the caller was trusted) unless +the -f option had been used to supply a different sender. This has been changed +so that From: is never checked if the caller is trusted. + +Philip Hazel +May 1999 + -- cgit v1.2.3