From e90fcc54809db2591dc083f43ef54c6ec8c60847 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 18:16:13 +0200 Subject: Adding upstream version 4.96. Signed-off-by: Daniel Baumann --- doc/dbm.discuss.txt | 321 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 321 insertions(+) create mode 100644 doc/dbm.discuss.txt (limited to 'doc/dbm.discuss.txt') diff --git a/doc/dbm.discuss.txt b/doc/dbm.discuss.txt new file mode 100644 index 0000000..50f0687 --- /dev/null +++ b/doc/dbm.discuss.txt @@ -0,0 +1,321 @@ +DBM Libraries for use with Exim +------------------------------- + +Background +---------- + +Exim uses direct-access (so-called "dbm") files for a number of different +purposes. These are files arranged so that the data they contain is indexed and +can quickly be looked up by quoting an appropriate key. They are used as +follows: + +1. Exim keeps its "hints" databases in dbm files. + +2. The configuration can specify that certain things (e.g. aliases) be looked + up in dbm files. + +3. The configuration can contain expansion strings that involve lookups in dbm + files. + +4. The filter commands "mail" and "vacation" have a facility for replying only + once to each incoming address. The record of which addresses have already + received replies may be kept in a dbm file, depending on the configuration + option once_file_size. + +The runtime configuration can be set up without specifying 2 or 3, but Exim +always requires the availability of a dbm library, for 1 (and 4 if configured +that way). + + +DBM Libraries +------------- + +The original library that provided the dbm facility in Unix was called "dbm". +This seems to have been superseded quite some time ago by a new version called +"ndbm" which permits several dbm files to be open at once. Several operating +systems, including those from Sun, contain ndbm as standard. + +A number of alternative libraries also exist, the most common of which seems to +be Berkeley DB (just called DB hereinafter). Release 1.85 was around for +some time, and various releases 2.x began to appear towards the end of 1997. In +November 1999, version 3.0 was released, and the ending of support for 2.7.7, +the last 2.x release, was announced for November 2000. (Support for 1.85 has +already ceased.) There were further 3.x releases, but by the end of 2001, the +current release was 4.0.14. In 2022 it was 5.3.28 on Linux (the then-owner +has developed it further but Exim does not support anything after 5.x). + +There are major differences in implementation and interface between the DB 1.x +and 2.x/3.x/4.x releases, and they are best considered as two independent dbm +libraries. Changes to the API were made for 3.0 and again for 3.1. + +Another DBM library is the GNU library, gdbm, though this does not seem to be +very widespread. + +Yet another dbm library is tdb (Trivial Data Base) which has come out of the +Samba project. The first releases seem to have been in mid-2000. + +Some older Linux releases contain gdbm as standard, while others contain no dbm +library. More recent releases contain DB 1.85 or 2.x or later, and presumably +will track the development of the DB library. Some BSD versions of Unix include +DB 1.85 or later. All of the non-ndbm libraries except tdb contain +compatibility interfaces so that programs written to call the ndbm functions +should, in theory, work with them, but there are some potential pitfalls which +have caught out Exim users in the past. + +Exim has been tested with ndbm, gdbm, DB 1.85, DB 2.x, DB 3.1, DB 4.0.14, and +tdb 1.0.2, in various different modes in some cases, and is believed to work +with all of them if it and they are properly configured. + +I have considered the possibility of calling different dbm libraries for +different functions from a single Exim binary. However, because all bar one of +the libraries provide ndbm compatibility interfaces (and therefore the same +function names) it would require a lot of complicated, error-prone trickery to +achieve this. Exim therefore uses a single library for all its dbm activities. + +However, Exim does also support cdb (Constant Data Base), an efficient file +arrangement for indexed data that does not change incrementally (for example, +alias files). This is independent of any dbm library and can be used alongside +any of them. + + +Locking +------- + +The configuration option EXIMDB_LOCK_TIMEOUT controls how long Exim waits to +get a lock on a hints database. From version 1.80 onwards, Exim does not +attempt to take out a lock on an actual database file (this caused problems in +the past). Instead, it takes out an fcntl() lock on a separate file whose name +ends in ".lockfile". This ensures that Exim has exclusive access to the +database before even attempting to open it. Exim creates the lock file the +first time it needs it. It should never be removed. + + +Main Pitfall +------------ + +The OS-specific configuration files that are used to build Exim specify the use +of Berkeley DB on those systems where it is known to be standard. In the +absence of any special configuration options, Exim uses the ndbm set of +functions to control its dbm databases. This should work with any of the dbm +libraries because those that are not ndbm have compatibility interfaces. +However, there is one awful pitfall: + +Exim #includes a header file called ndbm.h which defines the functions and the +interface data block; gdbm and DB 1.x provide their own versions of this header +file, later DB versions do not. If it should happen that the wrong version of +nbdm.h is seen by Exim, it may compile without error, but fail to operate +correctly at runtime. + +This situation can easily arise when more than one dbm library is installed on +a single host. For example, if you decide to use DB 1.x on a system where gdbm +is the standard library, unless you are careful in setting up the include +directories for Exim, it may see gdbm's ndbm.h file instead of DB's. The +situation is even worse with later versions of DB, which do not provide an +ndbm.h file at all. + +One way out of this for gdbm and any of the versions of DB is to configure Exim +to call the DBM library in its native mode instead of via the ndbm +compatibility interface, thus avoiding the use of ndbm.h. This is done by +setting the USE_DB configuration option if you are using Berkeley DB, or +USE_GDBM if you are using gdbm. This is the recommended approach. + + +NDBM +---- + +The ndbm library holds its data in two files, with extensions .dir and .pag. +This makes atomic updating of, for example, alias files, difficult, because +simple renaming cannot be used without some risk. However, if your system has +ndbm installed, Exim should compile and run without any problems. + + +GDBM +---- + +The gdbm library, when called via the ndbm compatibility interface, makes two +hard links to a single file, with extensions .dir and .pag. As mentioned above, +gdbm provides its own version of the ndbm.h header, and you must ensure that +this is seen by Exim rather than any other version. This is not likely to be a +problem if gdbm is the only dbm library on your system. + +If gdbm is called via the native interface (by setting USE_GDBM in your +Local/Makefile), it uses a single file, with no extension on the name, and the +ndbm.h header is not required. + +The gdbm library does its own locking of the single file that it uses. From +version 1.80 onwards, Exim locks on an entirely separate file before accessing +a hints database, so gdbm's locking should always succeed. + + +Berkeley DB 1.8x +---------------- + +1.85 was the most widespread DB 1.x release; there is also a 1.86 bug-fix +release, but the belief is that the bugs it fixes will not affect Exim. +However, maintenance for 1.x releases has been phased out. + +This dbm library can be called by Exim in one of two ways: via the ndbm +compatibility interface, or via its own native interface. There are two +advantages to doing the latter: (1) you don't run the risk of Exim's seeing the +"wrong" version of the ndbm.h header, as described above, and (2) the +performance is better. It is therefore recommended that you set USE_DB=yes in an +appropriate Local/Makefile-xxx file. (If you are compiling for just one OS, it +can go in Local/Makefile itself.) + +When called via the compatibility interface, DB 1.x creates a single file with +a .db extension. When called via its native interface, no extension is added to +the file name handed to it. + +DB 1.x does not do any locking of its own. + + +Berkeley DB 2.x +--------------- + +DB 2.x was released in 1997. It is a major re-implementation and its native +interface is incompatible with DB 1.x, though a compatibility interface was +introduced in DB 2.1.0, and there is also an ndbm.h compatibility interface. + +Like 1.x, it can be called from Exim via the ndbm compatibility interface or +via its native interface, and once again setting USE_DB in order to get the +native interface is recommended. If USE_DB is *not* set, then you will have to +provide a suitable version of ndbm.h, because one does not come with the DB 2.x +distribution. A suitable version is: + + /************************************************* + * ndbm.h header for DB 2.x * + *************************************************/ + + /* This header should replace any other version of ndbm.h when Berkeley DB + version 2.x is in use via the ndbm compatibility interface. Otherwise, any + extant version of ndbm.h may cause programs to misbehave. There doesn't seem + to be a version of ndbm.h supplied with DB 2.x, so I made this for myself. + + Philip Hazel 12/Jun/97 + */ + + #define DB_DBM_HSEARCH + #include + + /* End */ + +When called via the compatibility interface, DB 2.x creates a single file with +a .db extension. When called via its native interface, no extension is added to +the file name handed to it. + +DB 2.x does not do any automatic locking of its own; it does have a set of +functions for various forms of locking, but Exim does not use them. + + +Berkeley DB 3.x +--------------- + +DB 3.0 was released in November 1999 and 3.1 in June 2000. The 3.x series is a +development of the 2.x series and the above comments apply. Exim can +automatically distinguish between the different versions, so it copes with the +changes to the API without needing any special configuration. + +When Exim creates a DBM file using DB 3.x (e.g. when creating one of its hints +databases), it specified the "hash" format. However, when it opens a DB 3 file +for reading only, it specifies "unknown". This means that it can read DB 3 +files in other formats that are created by other programs. + + +Berkeley DB 4.x +--------------- + +The 4.x series is a development of the 2.x and 3.x series, and the above +comments apply. + + +tdb +--- + +tdb 1.0.2 was released in September 2000. Its origin is the database functions +that are used by the Samba project. + + + +Testing Exim's dbm handling +--------------------------- + +Because there have been problems with dbm file locking in the past, I built +some testing code for Exim's dbm functions. This is very much a lash-up, but it +is documented here so that anybody who wants to check that their configuration +is locking properly can do so. Now that Exim does the locking on an entirely +separate file, locking problems are much less likely, but this code still +exists, just in case. Proceed as follows: + +. Build Exim in the normal way. This ensures that all the makesfiles etc. get + set up. + +. From within the build directory, obey "make test_dbfn". This makes a binary + file called test_dbfn. If you are experimenting with different configurations + you *must* do "make makefile" after changing anything, before obeying "make + test_dbfn" again, because the make target for test_dbfn isn't integrated + with the making of the makefile. + +. Identify a scratch directory where you have write access. Create a sub- + directory called "db" in the scratch directory. + +. Type the command "test_dbfn ". This will output some + general information such as + + Exim's db functions tester: interface type is db (v2) + DBM library: Berkeley DB: Sleepycat Software: DB 2.1.0: (6/13/97) + USE_DB is defined + + It then says + + Test the functions + > + +. At this point you can type commands to open a dbm file and read and write + data in it. First type the command "open ", e.g. "open junk". The + response should look like this + + opened DB file /db/junk: flags=102 + Locked + opened 0 + > + + The tester will have created a dbm file within the db directory of the + scratch directory. It will also have created a file with the extension + ".lockfile" in the same directory. Unlike Exim itself, it will not create + the db directory for itself if it does not exist. + +. To test the locking, don't type anything more for the moment. You now need to + set up another process running the same test_dbfn command, e.g. from a + different logon to the same host. This time, when you attempt to open the + file it should fail after a minute with a timeout error because it is + already in use. + +. If the second process doesn't produce any error message, but gets back to the + > prompt, then the locking is not working properly. + +. You can check that the second process gets the lock when the first process + releases it by exiting from the first process with ^D, q, or quit; or by + typing the command "close". + +. There are some other commands available that are not related to locking: + + write + e.g. + write abcde the quick brown fox + + writes a record to the database, + + read + delete + + read and delete a record, respectively, and + + scan + + scans the entire database. Note that the database is purely for testing the + dbm functions. It is *not* one of Exim's regular databases, and you should + not try running this testing program on any of Exim's real database + files. + +Philip Hazel +Last update: June 2002 -- cgit v1.2.3