msgid ""
msgstr ""
"Project-Id-Version: Exim\n"
"Report-Msgid-Bugs-To: pkg-exim4-maintainers@lists.alioth.debian.org\n"
"POT-Creation-Date: 2007-07-18 08:29+0200\n"
"PO-Revision-Date: 2005-06-08 13:35+0300\n"
"Last-Translator: Siim Põder <windo@windowlicker.dyn.ee>\n"
"Language-Team: Debian-installer tlkemeeskond <debian-boot-et@linux.ee>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Poedit-Language: Estonian\n"
"X-Poedit-Country: ESTONIA\n"

#. Type: boolean
#. Description
#: ../exim4-base.templates:1001
#, fuzzy
msgid "Remove undelivered messages in spool directory?"
msgstr "Kustutada puhverkataloogis olevad edastamata kirjad?"

#. Type: boolean
#. Description
#: ../exim4-base.templates:1001
#, fuzzy
msgid ""
"There are e-mail messages in the Exim spool directory /var/spool/exim4/"
"input/ which have not yet been delivered. Removing Exim will cause them to "
"remain undelivered until Exim is re-installed."
msgstr ""
"Exim'i puhverkataloogis /var/spool/exim4/input on mõned veel edastamata "
"kirjad. Kui plaanid Exim'i kunagi uuesti paigaldada võid kirjad alles jätta, "
"et nad peale paigaldamist ära saata. Võid need kirjad ka kustutada."

#. Type: boolean
#. Description
#: ../exim4-base.templates:1001
msgid ""
"If this option is not chosen, the spool directory is kept, allowing the "
"messages in the queue to be delivered at a later date after Exim is re-"
"installed."
msgstr ""

#. Type: error
#. Description
#: ../exim4-base.templates:2001 ../exim4-daemon-heavy.templates:1001
#: ../exim4-daemon-light.templates:1001 ../exim4.templates:1001
msgid "Reconfigure exim4-config instead of this package"
msgstr ""

#. Type: error
#. Description
#: ../exim4-base.templates:2001 ../exim4-daemon-heavy.templates:1001
#: ../exim4-daemon-light.templates:1001 ../exim4.templates:1001
msgid ""
"Exim4 has its configuration factored out into a dedicated package, exim4-"
"config. To reconfigure Exim4, use 'dpkg-reconfigure exim4-config'."
msgstr ""

#. Type: select
#. Choices
#. Translators beware! the following six strings form a single
#. Choices menu. - Every one of these strings has to fit in a standard
#. 80 characters console, as the fancy screen setup takes up some space
#. try to keep below ~71 characters.
#. DO NOT USE commas (,) in Choices translations otherwise
#. this will break the choices shown to users
#: ../exim4-config.templates:1001
msgid "internet site; mail is sent and received directly using SMTP"
msgstr "interneti masin; kirjad saadetakse ja võetakse vastu läbi SMTP"

#. Type: select
#. Choices
#. Translators beware! the following six strings form a single
#. Choices menu. - Every one of these strings has to fit in a standard
#. 80 characters console, as the fancy screen setup takes up some space
#. try to keep below ~71 characters.
#. DO NOT USE commas (,) in Choices translations otherwise
#. this will break the choices shown to users
#: ../exim4-config.templates:1001
msgid "mail sent by smarthost; received via SMTP or fetchmail"
msgstr "kirjad saadetakse läbi relee; võetakse vastu SMTP või fetchmailiga"

#. Type: select
#. Choices
#. Translators beware! the following six strings form a single
#. Choices menu. - Every one of these strings has to fit in a standard
#. 80 characters console, as the fancy screen setup takes up some space
#. try to keep below ~71 characters.
#. DO NOT USE commas (,) in Choices translations otherwise
#. this will break the choices shown to users
#: ../exim4-config.templates:1001
msgid "mail sent by smarthost; no local mail"
msgstr "kirjad saadetakse läbi relee; kohalikke kirju pole"

#. Type: select
#. Choices
#. Translators beware! the following six strings form a single
#. Choices menu. - Every one of these strings has to fit in a standard
#. 80 characters console, as the fancy screen setup takes up some space
#. try to keep below ~71 characters.
#. DO NOT USE commas (,) in Choices translations otherwise
#. this will break the choices shown to users
#: ../exim4-config.templates:1001
msgid "local delivery only; not on a network"
msgstr "vaid kohalikud kirjad; pole võrgus"

#. Type: select
#. Choices
#. Translators beware! the following six strings form a single
#. Choices menu. - Every one of these strings has to fit in a standard
#. 80 characters console, as the fancy screen setup takes up some space
#. try to keep below ~71 characters.
#. DO NOT USE commas (,) in Choices translations otherwise
#. this will break the choices shown to users
#: ../exim4-config.templates:1001
msgid "no configuration at this time"
msgstr "hetkel ei seadista"

#. Type: select
#. Description
#: ../exim4-config.templates:1002
msgid "General type of mail configuration:"
msgstr "E-posti üldine seadistus:"

#. Type: select
#. Description
#: ../exim4-config.templates:1002
#, fuzzy
msgid ""
"Please select the mail server configuration type that best meets your needs."
msgstr "Vali sulle kõige paremini sobiv seadistustüüp."

#. Type: select
#. Description
#: ../exim4-config.templates:1002
#, fuzzy
msgid ""
"Systems with dynamic IP addresses, including dialup systems, should "
"generally be configured to send outgoing mail to another machine, called a "
"'smarthost' for delivery because many receiving systems on the Internet "
"block incoming mail from dynamic IP addresses as spam protection."
msgstr ""
"Dünaamilise IP aadressiga süsteemid, sealhulgas sissehelistamisteenusega "
"süsteemid, peaksid oma kirjad üldjuhul saatma läbi teise masina, mis on nõus "
"neid kirju edastama (üldjuhul ISP meiliserver). Säärane süsteem võib kirju "
"ka vastu võtta, kuid see pole kohustuslik (va kirjad kastutajatele root ja "
"postmaster)"

#. Type: select
#. Description
#: ../exim4-config.templates:1002
msgid ""
"A system with a dynamic IP address can receive its own mail, or local "
"delivery can be disabled entirely (except mail for root and postmaster)."
msgstr ""

#. Type: boolean
#. Description
#: ../exim4-config.templates:2001
msgid "Really leave the mail system unconfigured?"
msgstr "Kas soovid tõesti postisüsteemi seadistamata jätta?"

#. Type: boolean
#. Description
#: ../exim4-config.templates:2001
#, fuzzy
msgid ""
"Until the mail system is configured, it will be broken and cannot be used. "
"Configuration at a later time can be done either by hand or by running 'dpkg-"
"reconfigure exim4-config' as root."
msgstr ""
"Kuni postisüsteemi seadistamiseni on e-post kasutuskõlbmati. Loomulikult "
"saad seda ka hiljem seadistada - kas siis käsitsi või käivitades "
"juurkasutajana \"dpkg-reconfigure exim4-config\"."

#. Type: string
#. Description
#: ../exim4-config.templates:3001
msgid "System mail name:"
msgstr "Süsteemi postinimi:"

#. Type: string
#. Description
#: ../exim4-config.templates:3001
msgid ""
"The 'mail name' is the domain name used to 'qualify' mail addresses without "
"a domain name."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:3001
#, fuzzy
msgid ""
"This name will also be used by other programs. It should be the single, "
"fully qualified domain name (FQDN)."
msgstr ""
"Seda nime kasutavad ka teised programmid. Ta peaks olema üks täispikk "
"domeeninimi (FQDN), kust kõik selle masina kirjad pärinevad."

#. Type: string
#. Description
#: ../exim4-config.templates:3001
msgid ""
"Thus, if a mail address on the local host is foo@example.org, the correct "
"value for this option would be example.org."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:3001
#, fuzzy
msgid ""
"This name won't appear on From: lines of outgoing messages if rewriting is "
"enabled."
msgstr ""
"Seda nime pole kirja From: ridadel näha juhul, kui seadistad "
"ümberkirjutamise."

#. Type: string
#. Description
#: ../exim4-config.templates:4001
msgid "Other destinations for which mail is accepted:"
msgstr "Teised domeenid, mille kirjad tuleb vastu võtta:"

#. Type: string
#. Description
#: ../exim4-config.templates:4001
#, fuzzy
msgid ""
"Please enter a semicolon-separated list of recipient domains for which this "
"machine should consider itself the final destination. These domains are "
"commonly called 'local domains'. The local hostname (${fqdn}) and "
"'localhost' are always added to the list given here."
msgstr ""
"Palun sisesta nimekiri domeenidest, mille jaoks see masin end kirjade "
"lõpppunktiks pidama peaks. Nimekirja pole vaja lisada selle masina võrgunime "
"(${fqdn}) ega \"localhost\"-i."

#. Type: string
#. Description
#: ../exim4-config.templates:4001
#, fuzzy
msgid ""
"By default all local domains will be treated identically. If both a.example "
"and b.example are local domains, acc@a.example and acc@b.example will be "
"delivered to the same final destination. If different domain names should be "
"treated differently, it is necessary to edit the config files afterwards."
msgstr ""
"Vaikimisi käsiteldakse kõiki domeene võrdselt. Kui soovid, et domeene "
"koheldaks erinevalt, pead hiljem seadistusfaile käsitsi parandama."

#. Type: string
#. Description
#: ../exim4-config.templates:5001
msgid "Domains to relay mail for:"
msgstr "Domeenid, millele kirju edastada (relee):"

#. Type: string
#. Description
#: ../exim4-config.templates:5001
msgid ""
"Please enter a semicolon-separated list of recipient domains for which this "
"system will relay mail, for example as a fallback MX or mail gateway. This "
"means that this system will accept mail for these domains from anywhere on "
"the Internet and deliver them according to local delivery rules."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:5001
msgid "Do not mention local domains here. Wildcards may be used."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:6001
msgid "Machines to relay mail for:"
msgstr "Masinad, mille kirju edastada (relee):"

#. Type: string
#. Description
#: ../exim4-config.templates:6001
msgid ""
"Please enter a semicolon-separated list of IP address ranges for which this "
"system will unconditionally relay mail, functioning as a smarthost."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:6001
#, fuzzy
msgid ""
"You should use the standard address/prefix format (e.g. 194.222.242.0/24 or "
"5f03:1200:836f::/48)."
msgstr ""
"Kui sääraseid masinaid on, sisesta nad koolonitega eraldades siia. Nad "
"peaksid olema tavapärases aadress/pikkus vormingus (näiteks "
"194.222.242.0/24)."

#. Type: string
#. Description
#: ../exim4-config.templates:6001
msgid ""
"If this system should not be a smarthost for any other host, leave this list "
"blank."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:7001
msgid "Visible domain name for local users:"
msgstr "Kohalikele kasutajatele nähtav domeeninimi:"

#. Type: string
#. Description
#: ../exim4-config.templates:7001
msgid ""
"The option to hide the local mail name in outgoing mail was enabled. It is "
"therefore necessary to specify the domain name this system should use for "
"the domain part of local users' sender addresses."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:8001
msgid "IP address or host name of the outgoing smarthost:"
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:8001
msgid ""
"Please enter the IP address or the host name of a mail server that this "
"system should use as outgoing smarthost. If the smarthost only accepts your "
"mail on a port different from TCP/25, append two colons and the port number "
"(for example smarthost.example::587 or 192.168.254.254::2525). Colons in "
"IPv6 addresses need to be doubled."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:8001
#, fuzzy
msgid ""
"If the smarthost requires authentication, please refer to the Debian-"
"specific README files in /usr/share/doc/exim4-base for notes about setting "
"up SMTP authentication."
msgstr ""
"Uuri /usr/share/doc/exim4-base/README.Debian.gz kui soovid teada SMTP "
"autentimisest."

#. Type: string
#. Description
#: ../exim4-config.templates:9001
msgid "Root and postmaster mail recipient:"
msgstr "Root ja postmaster kirjade vastuvõtja:"

#. Type: string
#. Description
#: ../exim4-config.templates:9001
msgid ""
"Mail for the 'postmaster', 'root', and other system accounts needs to be "
"redirected to the user account of the actual system administrator."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:9001
msgid ""
"If this value is left empty, such mail will be saved in /var/mail/mail, "
"which is not recommended."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:9001
#, fuzzy
msgid ""
"Note that postmaster's mail should be read on the system to which it is "
"directed, rather than being forwarded elsewhere, so (at least one of) the "
"users listed here should not redirect their mail off this machine. A 'real-' "
"prefix can be used to force local delivery."
msgstr ""
"Kirjad \"postmaster\", \"root\" ja teistele süsteemsetele kasutajatele "
"saadetakse tavaliselt edasi administraatori kasutajanimele. Kui jätad selle "
"väärtuse tühjaks, salvestatakse säärased kirjad /var/mail/mail, kuid see "
"pole hea variant. Pane tähele, et kirjad kasutajale postmaster tuleks lugeda "
"samas masinas, kuhu nad saadeti, neid ei tohiks teise masinasse edasi saata. "
"Seega peaks vähemalt üks kasutaja olema säärane, et tema kirju siit masinast "
"edasi ei saadetaks. Võid kasutada prefiksi \"real-\", et sundida kohalikku "
"edastamist."

#. Type: string
#. Description
#: ../exim4-config.templates:9001
#, fuzzy
msgid "Multiple user names need to be separated by spaces."
msgstr "Sisesta üks või enam tühikutega eraldatud kasutajanime."

#. Type: string
#. Description
#: ../exim4-config.templates:10001
msgid "IP-addresses to listen on for incoming SMTP connections:"
msgstr "IP-aadress, millel sisenevaid SMTP ühendusi oodata:"

#. Type: string
#. Description
#: ../exim4-config.templates:10001
msgid ""
"Please enter a semicolon-separated list of IP addresses. The Exim SMTP "
"listener daemon will listen on all IP addresses listed here."
msgstr ""

#. Type: string
#. Description
#: ../exim4-config.templates:10001
#, fuzzy
msgid ""
"An empty value will cause Exim to listen for connections on all available "
"network interfaces."
msgstr ""
"Kui jätad selle väärtuse tühjaks, võtab Exim vastu kõigi sobivate "
"võrguliideste SMTP pordile tulevad ühendused."

#. Type: string
#. Description
#: ../exim4-config.templates:10001
#, fuzzy
msgid ""
"If this system only receives mail directly from local services (and not from "
"other hosts), it is suggested to prohibit external connections to the local "
"Exim daemon. Such services include e-mail programs (MUAs) which talk to "
"localhost only as well as fetchmail. External connections are impossible "
"when 127.0.0.1 is entered here, as this will disable listening on public "
"network interfaces."
msgstr ""
"Kui see masin ei võta väljastpoolt üle SMTP mujalt tulevaid kirju vastu, "
"vaid ainult kohalikelt teenustelt nagu fetchmail või e-posti programm (MUA), "
"mis räägivad localhost'ga, peaksid väljastpoolt tulevate ühenduste "
"vastuvõtmise ära keelama. Selleks sisesta üksainus väärtus 127.0.0.1, "
"keelates avalikel võrguliidestel kuulamise ära."

#. Type: boolean
#. Description
#: ../exim4-config.templates:11001
msgid "Keep number of DNS-queries minimal (Dial-on-Demand)?"
msgstr "Minimiseerida DNS pärignute arv (nõudmisel sissehelistamine)?"

#. Type: boolean
#. Description
#: ../exim4-config.templates:11001
#, fuzzy
msgid ""
"In normal mode of operation Exim does DNS lookups at startup, and when "
"receiving or delivering messages. This is for logging purposes and allows "
"keeping down the number of hard-coded values in the configuration."
msgstr ""
"Tavaliselt sooritab Exim pidevalt DNS päringuid: teenuse käivitamisel, kirja "
"saamisel, jne - logifailide tähendusrikkuse ning seadistusfailidesse "
"kirjutatavate väärtuste piiramiseks."

#. Type: boolean
#. Description
#: ../exim4-config.templates:11001
#, fuzzy
msgid ""
"If this system does not have a DNS full service resolver available at all "
"times (for example if its Internet access is a dial-up line using dial-on-"
"demand), this might have unwanted consequences. For example, starting up "
"Exim or running the queue (even with no messages waiting) might trigger a "
"costly dial-up-event."
msgstr ""
"Kui sel masinal pole pidevat ligipääsu nimeserverile ja ta kasutab nõudmisel "
"sissehelistamisteenust, võib tulemusena iga exim'i käivitus ja järjekorra "
"jooksutamine (ka siis, kui järjekord tühi on) esile kutsuda kuluka "
"sissehelistamisteenuse käivitamise."

#. Type: boolean
#. Description
#: ../exim4-config.templates:11001
msgid ""
"This option should be selected if this system is using Dial-on-Demand. If it "
"has always-on Internet access, this option should be disabled."
msgstr ""

#. Type: title
#. Description
#: ../exim4-config.templates:12001
#, fuzzy
msgid "Mail Server configuration"
msgstr "E-posti üldine seadistus:"

#. Type: boolean
#. Description
#: ../exim4-config.templates:13001
msgid "Split configuration into small files?"
msgstr "Jagada seadistus väikesteks failideks?"

#. Type: boolean
#. Description
#: ../exim4-config.templates:13001
#, fuzzy
msgid ""
"The Debian exim4 packages can either use 'unsplit configuration', a single "
"monolithic file (/etc/exim4/exim4.conf.template) or 'split configuration', "
"where the actual Exim configuration files are built from about 50 smaller "
"files in /etc/exim4/conf.d/."
msgstr ""
"Debiani exim4 pakid võivad kasutada kas üht suurt seadistusfaili (/etc/exim4/"
"exim4.conf.template) või umbes 40 väikest faili /etc/exim4/conf.d/ all, "
"millest kokku saadakse lõplik seadistus."

#. Type: boolean
#. Description
#: ../exim4-config.templates:13001
#, fuzzy
msgid ""
"Unsplit configuration is better suited for large modifications and is "
"generally more stable, whereas split configuration offers a comfortable way "
"to make smaller modifications but is more fragile and might break if "
"modified carelessly."
msgstr ""
"Esimene sobib paremini olukordadesse, kus on vaja läbi viia suuri muudatusi "
"ning on üldjuhul stabiilsem, kui teine variant pakub jällegi mugavamat "
"väikeste muutuste haldamist, olles õrnem - võib suurte muudatuste korral "
"katki minna."

#. Type: boolean
#. Description
#: ../exim4-config.templates:13001
msgid ""
"A more detailed discussion of split and unsplit configuration can be found "
"in the Debian-specific README files in /usr/share/doc/exim4-base."
msgstr ""

#. Type: boolean
#. Description
#: ../exim4-config.templates:14001
msgid "Hide local mail name in outgoing mail?"
msgstr "Eemaldada väljaminevast postist kohalik postinimi?"

#. Type: boolean
#. Description
#: ../exim4-config.templates:14001
#, fuzzy
msgid ""
"The headers of outgoing mail can be rewritten to make it appear to have been "
"generated on a different system. If this option is chosen, '${mailname}', "
"'localhost' and '${dc_other_hostnames}' in From, Reply-To, Sender and Return-"
"Path are rewritten."
msgstr ""
"Et e-post paistaks pärinevat mõnest teisest süsteemist, on võimalik "
"väljaminevate kirjade päiseid ümber kirjutada: asendada \"${mailname}\" "
"\"localhost\" ja \"${dc_other_hostnames}\" From, Reply-To, Sender ja Return-"
"Path väljadel."

#. Type: select
#. Choices
#: ../exim4-config.templates:15001
msgid "mbox format in /var/mail/"
msgstr ""

#. Type: select
#. Choices
#: ../exim4-config.templates:15001
msgid "Maildir format in home directory"
msgstr ""

#. Type: select
#. Description
#: ../exim4-config.templates:15002
#, fuzzy
msgid "Delivery method for local mail:"
msgstr "kirjad saadetakse läbi relee; kohalikke kirju pole"

#. Type: select
#. Description
#: ../exim4-config.templates:15002
msgid ""
"Exim is able to store locally delivered email in different formats. The most "
"commonly used ones are mbox and Maildir. mbox uses a single file for the "
"complete mail folder stored in /var/mail/. With Maildir format every single "
"message is stored in a separate file in ~/Maildir/."
msgstr ""

#. Type: select
#. Description
#: ../exim4-config.templates:15002
msgid ""
"Please note that most mail tools in Debian expect the local delivery method "
"to be mbox in their default."
msgstr ""

#, fuzzy
#~ msgid "Move undelivered mails from exim 3 to exim4 spool?"
#~ msgstr ""
#~ "Tõsta veel edastamata kirjad exim (versioon 3) puhverkataloogist exim4 "
#~ "puhverkataloogi?"

#, fuzzy
#~ msgid ""
#~ "Choosing this option will move these messages to exim4's spool (/var/"
#~ "spool/exim4/input/) where they will be handled by exim4."
#~ msgstr ""
#~ "Exim'i või exim-tls puhverkataloogis /var/spool/exim/input/ on mõned veel "
#~ "edastamata kirjad. Nad võib üle tõsta exim4 puhverkataloogi (/var/spool/"
#~ "exim4/input/), kus hoolitseks nende kohaletoimetamise eest exim4."

#~ msgid ""
#~ "Be aware that this works only one-way, exim4 can handle exim(v3)'s spool "
#~ "but not the other way round."
#~ msgstr ""
#~ "Pane tähele, et tegemist on ühesuunalise protsessiga. Exim4 mõistab exim "
#~ "(versioon 3) puhvrit, kuid mitte vastupidi."

#~ msgid ""
#~ "Move the mails only if you don't plan to go back to exim(v3), otherwise "
#~ "the mail shouldn't be moved now but manually once you've converted your "
#~ "setup."
#~ msgstr ""
#~ "Tõsta kirjad ümber juhul, kui ei plaani enam exim (versioon 3) juurde "
#~ "tagasi minna. Vastasel juhul ei tohiks sa kirju praegu ümber tõsta, vaid "
#~ "peaksid seda hiljem käsitsi tegema - siis kui paigaldamine läbi on."

#, fuzzy
#~ msgid ""
#~ "If there are any more, enter them here, separated by semicolons. You may "
#~ "leave this blank if there are none."
#~ msgstr ""
#~ "Kui on veel mõned, sisesta nad koolonitega eraldatult siia. Kui rohkem "
#~ "pole, võid selle välja ka tühjaks jätta."

#, fuzzy
#~ msgid ""
#~ "Please enter here the domains for which this system will relay mail, for "
#~ "example as a fallback MX or mail gateway."
#~ msgstr ""
#~ "Palun sisesta domeenid, millele peab nõustuma kirju edastada (relee)."

#~ msgid ""
#~ "Such domains are domains for which you are prepared to accept mail from "
#~ "anywhere on the Internet. Do not mention local domains here."
#~ msgstr ""
#~ "Need on domeenid, millele oled nõus kirju kõikjalt internetist "
#~ "edastamiseks vastu võtma. Ära maini siin kohalikke domeene."

#, fuzzy
#~ msgid ""
#~ "The domains entered here should be separated by semicolons. Wildcards may "
#~ "be used."
#~ msgstr ""
#~ "Domeenid tuleks teineteisest koolonitega eraldada. Metamärgid (näiteks *) "
#~ "on lubatud."

#~ msgid ""
#~ "Since you enabled hiding the local mailname in outgoing mail, you must "
#~ "specify the domain name to use for mail from local users; typically this "
#~ "is the machine on which you normally receive your mail."
#~ msgstr ""
#~ "Kuna käivitasid kohaliku postinime väljuvatest kirjadest eemaldamise, "
#~ "pead määrama domeeninime, mida kohalike kasutajate kirjade juures "
#~ "tarvitada. Üldjuhul on see põhiliselt posti vastu võtva masina nimi."

#~ msgid "Where will your users read their mail?"
#~ msgstr "Kus su kasutajad oma kirju loevad?"

#~ msgid "Machine handling outgoing mail for this host (smarthost):"
#~ msgstr "Selle võrgukoha väljuvaid kirju edastav masin:"

#~ msgid "Enter the hostname of the machine to which outgoing mail is sent."
#~ msgstr "Sisesta väljaminevaid kirju edastava masina võrgunimi."

#~ msgid ""
#~ "Enable this feature if you are using Dial-on-Demand; otherwise, disable "
#~ "it."
#~ msgstr ""
#~ "Käivita see teenus vaid juhul, kui kasutad nõudmisel "
#~ "sissehelistamisteenust."

#, fuzzy
#~ msgid "Select the mail server configuration type that best fits your needs."
#~ msgstr "Vali sulle kõige paremini sobiv seadistustüüp."

#~ msgid "If you are unsure then you should not use split configuration."
#~ msgstr ""
#~ "Kui sa ei tea kumba valida, on kindlam jääda ühe suure faili juurde."

#~ msgid "manually convert from handcrafted Exim v3 configuration"
#~ msgstr "käsitsi teisendamine kodukootud exim v3 seadistustest"

#~ msgid "Configure Exim4 manually?"
#~ msgstr "Seadistada Exim4 käsitsi?"

#~ msgid ""
#~ "You indicated that you have a handcrafted Exim 3 configuration. To "
#~ "convert this to Exim 4, you can use the exim_convert4r4(8) tool after the "
#~ "installation. Consult /usr/share/doc/exim4-base/examples/example.conf.gz "
#~ "and /usr/share/doc/exim4-base/README.Debian.gz!"
#~ msgstr ""
#~ "Sul on kodukootud Exim 3 seadistus. Käivita peale paigaldamist tööriist "
#~ "exim_convert4r4(8) - see aitab sul seadistust Exim 4 sobivaks teisendada. "
#~ "Ühtlasi loe /usr/share/doc/exim4-base/examples/example.conf.gz ning /usr/"
#~ "share/doc/exim4-base/README.Debian.gz!"

#~ msgid ""
#~ "Until your mail system is configured, it will be broken and cannot be "
#~ "used."
#~ msgstr "Kuni postisüsteemi seadistamiseni on e-post kasutuskõlbmatu."

#~ msgid ""
#~ "Your \"mail name\" is the hostname portion of the address to be shown on "
#~ "outgoing news and mail messages (following the username and @ sign) "
#~ "unless hidden with rewriting."
#~ msgstr ""
#~ "Sinu \"postinimi\" on võrgunime osa, mis on näha väljuvates e-kirjades ja "
#~ "uudisgrupipostitustes (peale kasutajanime ja @ märki) kui teda "
#~ "ümberkirjutamise abil ära ei peideta."

#~ msgid ""
#~ "Please enter here the networks of local machines for which you accept to "
#~ "relay the mail."
#~ msgstr ""
#~ "Palun sisesta siia masinad, kellelt kõik kirjad edastamiseks vastu võtta."

#~ msgid ""
#~ "This should include a list of all machines that will use us as a "
#~ "smarthost."
#~ msgstr ""
#~ "See on nimekiri masinatest, millelt tulevad kirjad jaoks on meiliserver "
#~ "edastamiseks vastu võtab."

#~ msgid ""
#~ "You need to double the colons in IPv6 addresses (e.g. "
#~ "5f03::1200::836f::::/48)"
#~ msgstr ""
#~ "IPv6 aadressides pead koolonid kahekordselt kirjutama (näiteks "
#~ "5f03::1200::836f::::/48)"

#~ msgid ""
#~ "Enter a colon-separated list of IP-addresses to listen on.  You need to "
#~ "double the colons in IPv6 addresses (e.g. 5f03::1200::836f::::)."
#~ msgstr ""
#~ "Sisesta koolonitega eraldatud IP-aadresside nimekiri, millelt "
#~ "sissetulevaid ühendusi oodata. IPv6 aadressides olevad koolonid pead "
#~ "kirjutama topelt (näiteks 5f03::1200::836f::::)."

#~ msgid "Configuring Exim v4 (exim4-config)"
#~ msgstr "Exim v4 (exim4-config) seadistamine"