diff options
Diffstat (limited to '')
-rw-r--r-- | intl/icu/source/tools/toolutil/ucm.h | 302 |
1 files changed, 302 insertions, 0 deletions
diff --git a/intl/icu/source/tools/toolutil/ucm.h b/intl/icu/source/tools/toolutil/ucm.h new file mode 100644 index 0000000000..8ea90604d4 --- /dev/null +++ b/intl/icu/source/tools/toolutil/ucm.h @@ -0,0 +1,302 @@ +// © 2016 and later: Unicode, Inc. and others. +// License & terms of use: http://www.unicode.org/copyright.html +/* + ******************************************************************************* + * Copyright (C) 2003-2013, International Business Machines + * Corporation and others. All Rights Reserved. + ******************************************************************************* + * file name: ucm.h + * encoding: UTF-8 + * tab size: 8 (not used) + * indentation:4 + * + * created on: 2003jun20 + * created by: Markus W. Scherer + * + * Definitions for the .ucm file parser and handler module ucm.c. + */ + +#ifndef __UCM_H__ +#define __UCM_H__ + +#include "unicode/utypes.h" +#include "ucnvmbcs.h" +#include "ucnv_ext.h" +#include "filestrm.h" +#include <stdio.h> + +#if !UCONFIG_NO_CONVERSION + +U_CDECL_BEGIN + +/* constants for UCMapping.moveFlag */ +enum { + UCM_MOVE_TO_EXT=1, + UCM_REMOVE_MAPPING=2 +}; + +/* + * Per-mapping data structure + * + * u if uLen==1: Unicode code point + * else index to uLen code points + * b if bLen<=4: up to 4 bytes + * else index to bLen bytes + * uLen number of code points + * bLen number of words containing left-justified bytes + * bIsMultipleChars indicates that the bytes contain more than one sequence + * according to the state table + * f flag for roundtrip (0), fallback (1), sub mapping (2), reverse fallback (3) + * or "good one-way" mapping (4). + * Same values as in the source file after | + */ +typedef struct UCMapping { + UChar32 u; + union { + uint32_t idx; + uint8_t bytes[4]; + } b; + int8_t uLen, bLen, f, moveFlag; +} UCMapping; + +/* constants for UCMTable.flagsType */ +enum { + UCM_FLAGS_INITIAL, /* no mappings parsed yet */ + UCM_FLAGS_EXPLICIT, /* .ucm file has mappings with | fallback indicators */ + UCM_FLAGS_IMPLICIT, /* .ucm file has mappings without | fallback indicators, later wins */ + UCM_FLAGS_MIXED /* both implicit and explicit */ +}; + +typedef struct UCMTable { + UCMapping *mappings; + int32_t mappingsCapacity, mappingsLength; + + UChar32 *codePoints; + int32_t codePointsCapacity, codePointsLength; + + uint8_t *bytes; + int32_t bytesCapacity, bytesLength; + + /* index map for mapping by bytes first */ + int32_t *reverseMap; + + uint8_t unicodeMask; + int8_t flagsType; /* UCM_FLAGS_INITIAL etc. */ + UBool isSorted; +} UCMTable; + +enum { + MBCS_STATE_FLAG_DIRECT=1, + MBCS_STATE_FLAG_SURROGATES, + + MBCS_STATE_FLAG_READY=16 +}; + +typedef struct UCMStates { + int32_t stateTable[MBCS_MAX_STATE_COUNT][256]; + uint32_t stateFlags[MBCS_MAX_STATE_COUNT], + stateOffsetSum[MBCS_MAX_STATE_COUNT]; + + int32_t countStates, minCharLength, maxCharLength, countToUCodeUnits; + int8_t conversionType, outputType; +} UCMStates; + +typedef struct UCMFile { + UCMTable *base, *ext; + UCMStates states; + + char baseName[UCNV_MAX_CONVERTER_NAME_LENGTH]; +} UCMFile; + +/* simple accesses ---------------------------------------------------------- */ + +#define UCM_GET_CODE_POINTS(t, m) \ + (((m)->uLen==1) ? &(m)->u : (t)->codePoints+(m)->u) + +#define UCM_GET_BYTES(t, m) \ + (((m)->bLen<=4) ? (m)->b.bytes : (t)->bytes+(m)->b.idx) + +/* APIs --------------------------------------------------------------------- */ + +U_CAPI UCMFile * U_EXPORT2 +ucm_open(void); + +U_CAPI void U_EXPORT2 +ucm_close(UCMFile *ucm); + +U_CAPI UBool U_EXPORT2 +ucm_parseHeaderLine(UCMFile *ucm, + char *line, char **pKey, char **pValue); + +/* @return -1 illegal bytes 0 suitable for base table 1 needs to go into extension table */ +U_CAPI int32_t U_EXPORT2 +ucm_mappingType(UCMStates *baseStates, + UCMapping *m, + UChar32 codePoints[UCNV_EXT_MAX_UCHARS], + uint8_t bytes[UCNV_EXT_MAX_BYTES]); + +/* add a mapping to the base or extension table as appropriate */ +U_CAPI UBool U_EXPORT2 +ucm_addMappingAuto(UCMFile *ucm, UBool forBase, UCMStates *baseStates, + UCMapping *m, + UChar32 codePoints[UCNV_EXT_MAX_UCHARS], + uint8_t bytes[UCNV_EXT_MAX_BYTES]); + +U_CAPI UBool U_EXPORT2 +ucm_addMappingFromLine(UCMFile *ucm, const char *line, UBool forBase, UCMStates *baseStates); + + +U_CAPI UCMTable * U_EXPORT2 +ucm_openTable(void); + +U_CAPI void U_EXPORT2 +ucm_closeTable(UCMTable *table); + +U_CAPI void U_EXPORT2 +ucm_resetTable(UCMTable *table); + +U_CAPI void U_EXPORT2 +ucm_sortTable(UCMTable *t); + +/* + * Remove mappings with their move flag set from the base table + * and move some of them (with UCM_MOVE_TO_EXT) to the extension table. + */ +U_CAPI void U_EXPORT2 +ucm_moveMappings(UCMTable *base, UCMTable *ext); + +/** + * Read a table from a .ucm file, from after the CHARMAP line to + * including the END CHARMAP line. + */ +U_CAPI void U_EXPORT2 +ucm_readTable(UCMFile *ucm, FileStream* convFile, + UBool forBase, UCMStates *baseStates, + UErrorCode *pErrorCode); + +/** + * Check the validity of mappings against a base table's states; + * necessary for extension-only tables that were read before their base tables. + */ +U_CAPI UBool U_EXPORT2 +ucm_checkValidity(UCMTable *ext, UCMStates *baseStates); + +/** + * Check a base table against an extension table. + * Set the moveTarget!=NULL if it is possible to move mappings from the base. + * This is the case where base and extension tables are parsed from a single file + * (moveTarget==ext) + * or when delta file mappings are subtracted from a base table. + * + * When a base table cannot be modified because a delta file is parsed in makeconv, + * then set moveTarget=NULL. + * + * if(intersectBase) then mappings that exist in the base table but not in + * the extension table are moved to moveTarget instead of showing an error. + * + * Special mode: + * If intersectBase==2 for a DBCS extension table, then SBCS mappings are + * not moved out of the base unless their Unicode input requires it. + * This helps ucmkbase generate base tables for DBCS-only extension .cnv files. + * + * For both tables in the same file, the extension table is automatically + * built. + * For separate files, the extension file can use a complete mapping table (.ucm file), + * so that common mappings need not be stripped out manually. + * + * + * Sort both tables, and then for each mapping direction: + * + * If intersectBase is true and the base table contains a mapping + * that does not exist in the extension table, then this mapping is moved + * to moveTarget. + * + * - otherwise - + * + * If the base table contains a mapping for which the input sequence is + * the same as the extension input, then + * - if the output is the same: remove the extension mapping + * - else: error + * + * If the base table contains a mapping for which the input sequence is + * a prefix of the extension input, then + * - if moveTarget!=NULL: move the base mapping to the moveTarget table + * - else: error + * + * @return false in case of an irreparable error + */ +U_CAPI UBool U_EXPORT2 +ucm_checkBaseExt(UCMStates *baseStates, UCMTable *base, UCMTable *ext, + UCMTable *moveTarget, UBool intersectBase); + +U_CAPI void U_EXPORT2 +ucm_printTable(UCMTable *table, FILE *f, UBool byUnicode); + +U_CAPI void U_EXPORT2 +ucm_printMapping(UCMTable *table, UCMapping *m, FILE *f); + + +U_CAPI void U_EXPORT2 +ucm_addState(UCMStates *states, const char *s); + +U_CAPI void U_EXPORT2 +ucm_processStates(UCMStates *states, UBool ignoreSISOCheck); + +U_CAPI int32_t U_EXPORT2 +ucm_countChars(UCMStates *states, + const uint8_t *bytes, int32_t length); + + +U_CAPI int8_t U_EXPORT2 +ucm_parseBytes(uint8_t bytes[UCNV_EXT_MAX_BYTES], const char *line, const char **ps); + +U_CAPI UBool U_EXPORT2 +ucm_parseMappingLine(UCMapping *m, + UChar32 codePoints[UCNV_EXT_MAX_UCHARS], + uint8_t bytes[UCNV_EXT_MAX_BYTES], + const char *line); + +U_CAPI void U_EXPORT2 +ucm_addMapping(UCMTable *table, + UCMapping *m, + UChar32 codePoints[UCNV_EXT_MAX_UCHARS], + uint8_t bytes[UCNV_EXT_MAX_BYTES]); + +/* very makeconv-specific functions ----------------------------------------- */ + +/* finalize and optimize states after the toUnicode mappings are processed */ +U_CAPI void U_EXPORT2 +ucm_optimizeStates(UCMStates *states, + uint16_t **pUnicodeCodeUnits, + _MBCSToUFallback *toUFallbacks, int32_t countToUFallbacks, + UBool verbose); + +/* moved here because it is used inside ucmstate.c */ +U_CAPI int32_t U_EXPORT2 +ucm_findFallback(_MBCSToUFallback *toUFallbacks, int32_t countToUFallbacks, + uint32_t offset); + +/* very rptp2ucm-specific functions ----------------------------------------- */ + +/* + * Input: Separate tables with mappings from/to Unicode, + * subchar and subchar1 (0 if none). + * All mappings must have flag 0. + * + * Output: fromUTable will contain the union of mappings with the correct + * precision flags, and be sorted. + */ +U_CAPI void U_EXPORT2 +ucm_mergeTables(UCMTable *fromUTable, UCMTable *toUTable, + const uint8_t *subchar, int32_t subcharLength, + uint8_t subchar1); + +U_CAPI UBool U_EXPORT2 +ucm_separateMappings(UCMFile *ucm, UBool isSISO); + +U_CDECL_END + +#endif + +#endif + |