diff options
Diffstat (limited to '')
| -rw-r--r-- | l10n-mr/devtools/client/aboutdebugging.ftl | 220 |
1 files changed, 220 insertions, 0 deletions
diff --git a/l10n-mr/devtools/client/aboutdebugging.ftl b/l10n-mr/devtools/client/aboutdebugging.ftl new file mode 100644 index 0000000000..a4d76a7603 --- /dev/null +++ b/l10n-mr/devtools/client/aboutdebugging.ftl @@ -0,0 +1,220 @@ +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. + + +### These strings are used inside the about:debugging UI. + + +# Page Title strings + +# Page title (ie tab title) for the Setup page +about-debugging-page-title-setup-page = डीबगिंग - सेटअप + +# Sidebar strings + +# Sidebar heading for connecting to some remote source +about-debugging-sidebar-setup = + .name = सेटअप + +# Text displayed in the about:debugging sidebar when USB devices discovery is enabled. +about-debugging-sidebar-usb-enabled = USB सक्षम + +# Text displayed in the about:debugging sidebar when USB devices discovery is disabled +# (for instance because the mandatory ADB extension is not installed). +about-debugging-sidebar-usb-disabled = USB अक्षम + +# Connection status (connected) for runtime items in the sidebar +aboutdebugging-sidebar-runtime-connection-status-connected = जोडलेले +# Connection status (disconnected) for runtime items in the sidebar +aboutdebugging-sidebar-runtime-connection-status-disconnected = खंडीत + +# Text displayed in the about:debugging sidebar when no device was found. +about-debugging-sidebar-no-devices = कोणतीही उपकरणे आढळली नाहीत + +# Text displayed in buttons found in sidebar items representing remote runtimes. +# Clicking on the button will attempt to connect to the runtime. +about-debugging-sidebar-item-connect-button = जोडा + +# Text displayed in buttons found in sidebar items when the runtime is connecting. +about-debugging-sidebar-item-connect-button-connecting = जोडणी करत आहे… + +# Text displayed in buttons found in sidebar items when the connection failed. +about-debugging-sidebar-item-connect-button-connection-failed = जोडणी अयशस्वी + +# Text displayed as connection error in sidebar item when the connection has timed out. +about-debugging-sidebar-item-connect-button-connection-timeout = जोडणी कालबाह्य + +# Text displayed in sidebar items for remote devices where a compatible browser (eg +# Firefox) has not been detected yet. Typically, Android phones connected via USB with +# USB debugging enabled, but where Firefox is not started. +about-debugging-sidebar-runtime-item-waiting-for-browser = ब्राउझरची प्रतीक्षा करीत आहे ... + +# Text displayed in sidebar items for remote devices that have been disconnected from the +# computer. +about-debugging-sidebar-runtime-item-unplugged = प्लग न केलेले + +# Title for runtime sidebar items that are related to a specific device (USB, WiFi). +about-debugging-sidebar-runtime-item-name = + .title = { $displayName } ({ $deviceName }) +# Title for runtime sidebar items where we cannot get device information (network +# locations). +about-debugging-sidebar-runtime-item-name-no-device = + .title = { $displayName } + +# Text to show in the footer of the sidebar that links to a help page +# (currently: https://developer.mozilla.org/docs/Tools/about:debugging) +about-debugging-sidebar-support = डीबगिंग समर्थन + +# Text to show as the ALT attribute of a help icon that accompanies the help about +# debugging link in the footer of the sidebar +about-debugging-sidebar-support-icon = + .alt = मदत चिन्ह + +# Text displayed in a sidebar button to refresh the list of USB devices. Clicking on it +# will attempt to update the list of devices displayed in the sidebar. +about-debugging-refresh-usb-devices-button = उपकरणे पुन्हा दाखल करा + +# Setup Page strings + +# Title of the Setup page. +about-debugging-setup-title = सेटअप + +# Title of the heading Connect section of the Setup page. +about-debugging-setup-connect-heading = उपकरण जोडा + +# USB section of the Setup page +about-debugging-setup-usb-title = USB + +# Text of the button displayed in the USB section of the setup page when USB debugging is disabled. +# Clicking on it will download components needed to debug USB Devices remotely. +about-debugging-setup-usb-enable-button = USB उपकरणे सक्षम करा + +# Text of the button displayed in the USB section of the setup page when USB debugging is enabled. +about-debugging-setup-usb-disable-button = USB उपकरणे अक्षम करा + +# Text of the button displayed in the USB section of the setup page while USB debugging +# components are downloaded and installed. +about-debugging-setup-usb-updating-button = अद्ययावत करत आहे... + +# USB section of the Setup page (USB status) +about-debugging-setup-usb-status-enabled = सक्रिय +about-debugging-setup-usb-status-disabled = निष्क्रिय +about-debugging-setup-usb-status-updating = अद्ययावत करत आहे... + +# Network section of the Setup page +about-debugging-setup-network = + .title = नेटवर्क स्थान + +# Text of a button displayed after the network locations "Host" input. +# Clicking on it will add the new network location to the list. +about-debugging-network-locations-add-button = जोडा + +# Text of the label for the text input that allows users to add new network locations in +# the Connect page. A host is a hostname and a port separated by a colon, as suggested by +# the input's placeholder "localhost:6080". +about-debugging-network-locations-host-input-label = यजमान + +# Text of a button displayed next to existing network locations in the Connect page. +# Clicking on it removes the network location from the list. +about-debugging-network-locations-remove-button = काढून टाका + +# Runtime Page strings + +# Below are the titles for the various categories of debug targets that can be found +# on "runtime" pages of about:debugging. +# Title of the temporary extensions category (only available for "This Firefox" runtime). +about-debugging-runtime-temporary-extensions = + .name = तात्पुरते विस्तार +# Title of the extensions category. +about-debugging-runtime-extensions = + .name = विस्तार +# Title of the tabs category. +about-debugging-runtime-tabs = + .name = टॅब +# Title of the service workers category. +about-debugging-runtime-service-workers = + .name = Service Workers +# Title of the processes category. +about-debugging-runtime-processes = + .name = प्रक्रिया + +# Label of the button opening the performance profiler panel in runtime pages for remote +# runtimes. +about-debugging-runtime-profile-button2 = प्रोफाइल कामगिरी + +# Displayed for runtime info in runtime pages. +# { $name } is brand name such as "Firefox Nightly" +# { $version } is version such as "64.0a1" +about-debugging-runtime-name = { $name } ( { $version }) + +# Text of a button displayed in Runtime pages for remote runtimes. +# Clicking on the button will close the connection to the runtime. +about-debugging-runtime-disconnect-button = खंडीत करा + +# Title of a modal dialog displayed on remote runtime pages after clicking on the Profile Runtime button. +about-debugging-profiler-dialog-title2 = प्रोफाइलर + +# Debug Targets strings + +# Displayed in the categories of "runtime" pages that don't have any debug target to +# show. Debug targets depend on the category (extensions, tabs, workers...). +about-debugging-debug-target-list-empty = आतापर्यंत काहीही नाही. + +# Text of a button displayed next to debug targets of "runtime" pages. Clicking on this +# button will open a DevTools toolbox that will allow inspecting the target. +# A target can be an addon, a tab, a worker... +about-debugging-debug-target-inspect-button = तपासा + +# Text of a button displayed for a temporary extension loaded in the "This Firefox" page. +# Clicking on the button will reload the extension. +about-debugging-tmp-extension-reload-button = पुनःदाखल करा + +# Text of a button displayed for a temporary extension loaded in the "This Firefox" page. +# Clicking on the button will uninstall the extension and remove it from the page. +about-debugging-tmp-extension-remove-button = काढून टाका + +# Text displayed for extensions (temporary extensions only) in "runtime" pages, before +# displaying the location of the temporary extension. +about-debugging-extension-location = + .label = स्थान + +# Text displayed for extensions in "runtime" pages, before displaying the extension's ID. +# For instance "geckoprofiler@mozilla.com" or "{ed26ddcb-5611-4512-a89a-51b8db81cfb2}". +about-debugging-extension-id = + .label = विस्तार ID + +# This string is displayed as a label of the button that unregisters a service worker. +about-debugging-worker-action-unregister = नोंदणी रद्द करा + +# Displayed for service workers in runtime pages that are currently running (service +# worker instance is active). +about-debugging-worker-status-running = सुरू आहे + +# Displayed for service workers in runtime pages that are registered but stopped. +about-debugging-worker-status-stopped = थांबले आहे + +# Displayed for service workers in runtime pages that are registering. +about-debugging-worker-status-registering = नोंदणी करत आहे + +# Displayed for service workers in runtime pages, to label the scope of a worker +about-debugging-worker-scope = + .label = मर्यादा + +# Displayed for service workers in runtime pages, to label the push service endpoint (url) +# of a worker +about-debugging-worker-push-service = + .label = पुश सेवा + +# Alt text used for the close icon of message component (warnings, errors and notifications). +about-debugging-message-close-icon = + .alt = संदेश बंद करा + +# Label text used for the error details of message component. +about-debugging-message-details-label-error = त्रुटी तपशील + +# Label text used for the warning details of message component. +about-debugging-message-details-label-warning = चेतावणी तपशील + +# Label text used for default state of details of message component. +about-debugging-message-details-label = तपशील |