1 files changed, 131 insertions, 0 deletions
diff --git a/media/libjpeg/simd/arm/jchuff.h b/media/libjpeg/simd/arm/jchuff.h
new file mode 100644
index 0000000000..2fbd252b9b
--- /dev/null
+++ b/media/libjpeg/simd/arm/jchuff.h
@@ -0,0 +1,131 @@
+/*
+ * jchuff.h
+ *
+ * This file was part of the Independent JPEG Group's software:
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * libjpeg-turbo Modifications:
+ * Copyright (C) 2009, 2018, 2021, D. R. Commander.
+ * Copyright (C) 2018, Matthias Räncker.
+ * Copyright (C) 2020-2021, Arm Limited.
+ * For conditions of distribution and use, see the accompanying README.ijg
+ * file.
+ */
+
+/* Expanded entropy encoder object for Huffman encoding.
+ *
+ * The savable_state subrecord contains fields that change within an MCU,
+ * but must not be updated permanently until we complete the MCU.
+ */
+
+#if defined(__aarch64__) || defined(_M_ARM64)
+#define BIT_BUF_SIZE  64
+#else
+#define BIT_BUF_SIZE  32
+#endif
+
+typedef struct {
+  size_t put_buffer;                    /* current bit accumulation buffer */
+  int free_bits;                        /* # of bits available in it */
+  int last_dc_val[MAX_COMPS_IN_SCAN];   /* last DC coef for each component */
+} savable_state;
+
+typedef struct {
+  JOCTET *next_output_byte;     /* => next byte to write in buffer */
+  size_t free_in_buffer;        /* # of byte spaces remaining in buffer */
+  savable_state cur;            /* Current bit buffer & DC state */
+  j_compress_ptr cinfo;         /* dump_buffer needs access to this */
+  int simd;
+} working_state;
+
+/* Outputting bits to the file */
+
+/* Output byte b and, speculatively, an additional 0 byte. 0xFF must be encoded
+ * as 0xFF 0x00, so the output buffer pointer is advanced by 2 if the byte is
+ * 0xFF.  Otherwise, the output buffer pointer is advanced by 1, and the
+ * speculative 0 byte will be overwritten by the next byte.
+ */
+#define EMIT_BYTE(b) { \
+  buffer[0] = (JOCTET)(b); \
+  buffer[1] = 0; \
+  buffer -= -2 + ((JOCTET)(b) < 0xFF); \
+}
+
+/* Output the entire bit buffer.  If there are no 0xFF bytes in it, then write
+ * directly to the output buffer.  Otherwise, use the EMIT_BYTE() macro to
+ * encode 0xFF as 0xFF 0x00.
+ */
+#if defined(__aarch64__) || defined(_M_ARM64)
+
+#define FLUSH() { \
+  if (put_buffer & 0x8080808080808080 & ~(put_buffer + 0x0101010101010101)) { \
+    EMIT_BYTE(put_buffer >> 56) \
+    EMIT_BYTE(put_buffer >> 48) \
+    EMIT_BYTE(put_buffer >> 40) \
+    EMIT_BYTE(put_buffer >> 32) \
+    EMIT_BYTE(put_buffer >> 24) \
+    EMIT_BYTE(put_buffer >> 16) \
+    EMIT_BYTE(put_buffer >>  8) \
+    EMIT_BYTE(put_buffer      ) \
+  } else { \
+    *((uint64_t *)buffer) = BUILTIN_BSWAP64(put_buffer); \
+    buffer += 8; \
+  } \
+}
+
+#else
+
+#if defined(_MSC_VER) && !defined(__clang__)
+#define SPLAT() { \
+  buffer[0] = (JOCTET)(put_buffer >> 24); \
+  buffer[1] = (JOCTET)(put_buffer >> 16); \
+  buffer[2] = (JOCTET)(put_buffer >>  8); \
+  buffer[3] = (JOCTET)(put_buffer      ); \
+  buffer += 4; \
+}
+#else
+#define SPLAT() { \
+  put_buffer = __builtin_bswap32(put_buffer); \
+  __asm__("str %1, [%0], #4" : "+r" (buffer) : "r" (put_buffer)); \
+}
+#endif
+
+#define FLUSH() { \
+  if (put_buffer & 0x80808080 & ~(put_buffer + 0x01010101)) { \
+    EMIT_BYTE(put_buffer >> 24) \
+    EMIT_BYTE(put_buffer >> 16) \
+    EMIT_BYTE(put_buffer >>  8) \
+    EMIT_BYTE(put_buffer      ) \
+  } else { \
+    SPLAT(); \
+  } \
+}
+
+#endif
+
+/* Fill the bit buffer to capacity with the leading bits from code, then output
+ * the bit buffer and put the remaining bits from code into the bit buffer.
+ */
+#define PUT_AND_FLUSH(code, size) { \
+  put_buffer = (put_buffer << (size + free_bits)) | (code >> -free_bits); \
+  FLUSH() \
+  free_bits += BIT_BUF_SIZE; \
+  put_buffer = code; \
+}
+
+/* Insert code into the bit buffer and output the bit buffer if needed.
+ * NOTE: We can't flush with free_bits == 0, since the left shift in
+ * PUT_AND_FLUSH() would have undefined behavior.
+ */
+#define PUT_BITS(code, size) { \
+  free_bits -= size; \
+  if (free_bits < 0) \
+    PUT_AND_FLUSH(code, size) \
+  else \
+    put_buffer = (put_buffer << size) | code; \
+}
+
+#define PUT_CODE(code, size, diff) { \
+  diff |= code << nbits; \
+  nbits += size; \
+  PUT_BITS(diff, nbits) \
+}