diff options
Diffstat (limited to 'security/nss/doc/rst/legacy/nss_sample_code/nss_sample_code_sample2')
-rw-r--r-- | security/nss/doc/rst/legacy/nss_sample_code/nss_sample_code_sample2/index.rst | 166 |
1 files changed, 166 insertions, 0 deletions
diff --git a/security/nss/doc/rst/legacy/nss_sample_code/nss_sample_code_sample2/index.rst b/security/nss/doc/rst/legacy/nss_sample_code/nss_sample_code_sample2/index.rst new file mode 100644 index 0000000000..76f6c21d8f --- /dev/null +++ b/security/nss/doc/rst/legacy/nss_sample_code/nss_sample_code_sample2/index.rst @@ -0,0 +1,166 @@ +.. _mozilla_projects_nss_nss_sample_code_nss_sample_code_sample2: + +NSS Sample Code sample2 +======================= + +.. _nss_sample_code_2_symmetric_encryption: + +`NSS Sample Code 2: Symmetric Encryption <#nss_sample_code_2_symmetric_encryption>`__ +------------------------------------------------------------------------------------- + +.. container:: + + .. code:: + + /* Example code to illustrate DES enccryption/decryption using NSS. + * The example skips the details of obtaining the Key & IV to use, and + * just uses a hardcoded Key & IV. + * Note: IV is only needed if Cipher Blocking Chaining (CBC) mode of encryption + * is used + * + * The recommended approach is to store and transport WRAPPED (encrypted) + * DES Keys (IVs can be in the clear). However, it is a common (and dangerous) + * practice to use raw DES Keys. This example shows the use of a RAW key. + */ + + + #include "nss.h" + #include "pk11pub.h" + + /* example Key & IV */ + unsigned char gKey[] = {0xe8, 0xa7, 0x7c, 0xe2, 0x05, 0x63, 0x6a, 0x31}; + unsigned char gIV[] = {0xe4, 0xbb, 0x3b, 0xd3, 0xc3, 0x71, 0x2e, 0x58}; + + int main(int argc, char **argv) + { + CK_MECHANISM_TYPE cipherMech; + PK11SlotInfo* slot = NULL; + PK11SymKey* SymKey = NULL; + SECItem* SecParam = NULL; + PK11Context* EncContext = NULL; + SECItem keyItem, ivItem; + SECStatus rv, rv1, rv2; + unsigned char data[1024], buf1[1024], buf2[1024]; + int i, result_len, tmp1_outlen, tmp2_outlen; + + /* Initialize NSS + * If your application code has already initialized NSS, you can skip it + * here. + * This code uses the simplest of the Init functions, which does not + * require a NSS database to exist + */ + rv = NSS_NoDB_Init("."); + if (rv != SECSuccess) + { + fprintf(stderr, "NSS initialization failed (err %d)\n", + PR_GetError()); + goto out; + } + + /* choose mechanism: CKM_DES_CBC_PAD, CKM_DES3_ECB, CKM_DES3_CBC..... + * Note that some mechanisms (*_PAD) imply the padding is handled for you + * by NSS. If you choose something else, then data padding is the + * application's responsibility + */ + cipherMech = CKM_DES_CBC_PAD; + slot = PK11_GetBestSlot(cipherMech, NULL); + /* slot = PK11_GetInternalKeySlot(); is a simpler alternative but in + * theory, it *may not* return the optimal slot for the operation. For + * DES ops, Internal slot is typically the best slot + */ + if (slot == NULL) + { + fprintf(stderr, "Unable to find security device (err %d)\n", + PR_GetError()); + goto out; + } + + /* NSS passes blobs around as SECItems. These contain a pointer to + * data and a length. Turn the raw key into a SECItem. */ + keyItem.type = siBuffer; + keyItem.data = gKey; + keyItem.len = sizeof(gKey); + + /* Turn the raw key into a key object. We use PK11_OriginUnwrap + * to indicate the key was unwrapped - which is what should be done + * normally anyway - using raw keys isn't a good idea */ + SymKey = PK11_ImportSymKey(slot, cipherMech, PK11_OriginUnwrap, CKA_ENCRYPT, + &keyItem, NULL); + if (SymKey == NULL) + { + fprintf(stderr, "Failure to import key into NSS (err %d)\n", + PR_GetError()); + goto out; + } + + /* set up the PKCS11 encryption parameters. + * when not using CBC mode, ivItem.data and ivItem.len can be 0, or you + * can simply pass NULL for the iv parameter in PK11_ParamFromIV func + */ + ivItem.type = siBuffer; + ivItem.data = gIV; + ivItem.len = sizeof(gIV); + SecParam = PK11_ParamFromIV(cipherMech, &ivItem); + if (SecParam == NULL) + { + fprintf(stderr, "Failure to set up PKCS11 param (err %d)\n", + PR_GetError()); + goto out; + } + + /* sample data we'll encrypt and decrypt */ + strcpy(data, "Encrypt me!"); + fprintf(stderr, "Clear Data: %s\n", data); + + /* ========================= START SECTION ============================= */ + /* If using the same key and iv over and over, stuff before this */ + /* section and after this section needs to be done only ONCE */ + + /* ENCRYPT data into buf1. buf1 len must be atleast (data len + 8) */ + tmp1_outlen = tmp2_outlen = 0; + + /* Create cipher context */ + EncContext = PK11_CreateContextBySymKey(cipherMech, CKA_ENCRYPT, + SymKey, SecParam); + rv1 = PK11_CipherOp(EncContext, buf1, &tmp1_outlen, sizeof(buf1), + data, strlen(data)+1); + rv2 = PK11_DigestFinal(EncContext, buf1+tmp1_outlen, &tmp2_outlen, + sizeof(buf1)-tmp1_outlen); + PK11_DestroyContext(EncContext, PR_TRUE); + result_len = tmp1_outlen + tmp2_outlen; + if (rv1 != SECSuccess || rv2 != SECSuccess) + goto out; + + fprintf(stderr, "Encrypted Data: "); + for (i=0; i<result_len; i++) + fprintf(stderr, "%02x ", buf1[i]); + fprintf(stderr, "\n"); + + + /* DECRYPT buf1 into buf2. buf2 len must be atleast buf1 len */ + tmp1_outlen = tmp2_outlen = 0; + + /* Create cipher context */ + EncContext = PK11_CreateContextBySymKey(cipherMech, CKA_DECRYPT, + SymKey, SecParam); + rv1 = PK11_CipherOp(EncContext, buf2, &tmp1_outlen, sizeof(buf2), + buf1, result_len); + rv2 = PK11_DigestFinal(EncContext, buf2+tmp1_outlen, &tmp2_outlen, + result_len-tmp1_outlen); + PK11_DestroyContext(EncContext, PR_TRUE); + result_len = tmp1_outlen + tmp2_outlen; + if (rv1 != SECSuccess || rv2 != SECSuccess) + goto out; + + fprintf(stderr, "Decrypted Data: %s\n", buf2); + + /* =========================== END SECTION ============================= */ + + + out: + if (SymKey) + PK11_FreeSymKey(SymKey); + if (SecParam) + SECITEM_FreeItem(SecParam, PR_TRUE); + + }
\ No newline at end of file |