diff options
Diffstat (limited to '')
| -rwxr-xr-x | third_party/aom/test/tools_common.sh | 477 |
1 files changed, 477 insertions, 0 deletions
diff --git a/third_party/aom/test/tools_common.sh b/third_party/aom/test/tools_common.sh new file mode 100755 index 0000000000..c087106060 --- /dev/null +++ b/third_party/aom/test/tools_common.sh @@ -0,0 +1,477 @@ +#!/bin/sh +## Copyright (c) 2016, Alliance for Open Media. All rights reserved +## +## This source code is subject to the terms of the BSD 2 Clause License and +## the Alliance for Open Media Patent License 1.0. If the BSD 2 Clause License +## was not distributed with this source code in the LICENSE file, you can +## obtain it at www.aomedia.org/license/software. If the Alliance for Open +## Media Patent License 1.0 was not distributed with this source code in the +## PATENTS file, you can obtain it at www.aomedia.org/license/patent. +## +## This file contains shell code shared by test scripts for libaom tools. + +# Use $AOM_TEST_TOOLS_COMMON_SH as a pseudo include guard. +if [ -z "${AOM_TEST_TOOLS_COMMON_SH}" ]; then +AOM_TEST_TOOLS_COMMON_SH=included + +set -e +devnull='> /dev/null 2>&1' +AOM_TEST_PREFIX="" + +elog() { + echo "$@" 1>&2 +} + +vlog() { + if [ "${AOM_TEST_VERBOSE_OUTPUT}" = "yes" ]; then + echo "$@" + fi +} + +# Sets $AOM_TOOL_TEST to the name specified by positional parameter one. +test_begin() { + AOM_TOOL_TEST="${1}" +} + +# Clears the AOM_TOOL_TEST variable after confirming that $AOM_TOOL_TEST matches +# positional parameter one. +test_end() { + if [ "$1" != "${AOM_TOOL_TEST}" ]; then + echo "FAIL completed test mismatch!." + echo " completed test: ${1}" + echo " active test: ${AOM_TOOL_TEST}." + return 1 + fi + AOM_TOOL_TEST='<unset>' +} + +# Echoes the target configuration being tested. +test_configuration_target() { + aom_config_c="${LIBAOM_CONFIG_PATH}/config/aom_config.c" + # Clean up the cfg pointer line from aom_config.c for easier re-use by + # someone examining a failure in the example tests. + # 1. Run grep on aom_config.c for cfg and limit the results to 1. + # 2. Split the line using ' = ' as separator. + # 3. Abuse sed to consume the leading " and trailing "; from the assignment + # to the cfg pointer. + cmake_config=$(awk -F ' = ' '/cfg/ { print $NF; exit }' "${aom_config_c}" \ + | sed -e s/\"// -e s/\"\;//) + echo cmake generated via command: cmake path/to/aom ${cmake_config} +} + +# Trap function used for failure reports and tool output directory removal. +# When the contents of $AOM_TOOL_TEST do not match the string '<unset>', reports +# failure of test stored in $AOM_TOOL_TEST. +cleanup() { + if [ -n "${AOM_TOOL_TEST}" ] && [ "${AOM_TOOL_TEST}" != '<unset>' ]; then + echo "FAIL: $AOM_TOOL_TEST" + fi + if [ "${AOM_TEST_PRESERVE_OUTPUT}" = "yes" ]; then + return + fi + if [ -n "${AOM_TEST_OUTPUT_DIR}" ] && [ -d "${AOM_TEST_OUTPUT_DIR}" ]; then + rm -rf "${AOM_TEST_OUTPUT_DIR}" + fi +} + +# Echoes the version string assigned to the VERSION_STRING_NOSP variable defined +# in $LIBAOM_CONFIG_PATH/config/aom_version.h to stdout. +cmake_version() { + aom_version_h="${LIBAOM_CONFIG_PATH}/config/aom_version.h" + + # Find VERSION_STRING_NOSP line, split it with '"' and print the next to last + # field to output the version string to stdout. + aom_version=$(awk -F \" '/VERSION_STRING_NOSP/ {print $(NF-1)}' \ + "${aom_version_h}") + echo "v${aom_version}" +} + +# Echoes current git version as reported by running 'git describe', or the +# version used by the cmake build when git is unavailable. +source_version() { + if git --version > /dev/null 2>&1; then + (cd "$(dirname "${0}")" + git describe) + else + cmake_version + fi +} + +# Echoes warnings to stdout when source version and CMake build generated +# version are out of sync. +check_version_strings() { + cmake_version=$(cmake_version) + source_version=$(source_version) + + if [ "${cmake_version}" != "${source_version}" ]; then + echo "Warning: version has changed since last cmake run." + vlog " cmake version: ${cmake_version} version now: ${source_version}" + fi +} + +# $1 is the name of an environment variable containing a directory name to +# test. +test_env_var_dir() { + local dir=$(eval echo "\${$1}") + if [ ! -d "${dir}" ]; then + elog "'${dir}': No such directory" + elog "The $1 environment variable must be set to a valid directory." + return 1 + fi +} + +# This script requires that the LIBAOM_BIN_PATH, LIBAOM_CONFIG_PATH, and +# LIBAOM_TEST_DATA_PATH variables are in the environment: Confirm that +# the variables are set and that they all evaluate to directory paths. +verify_aom_test_environment() { + test_env_var_dir "LIBAOM_BIN_PATH" \ + && test_env_var_dir "LIBAOM_CONFIG_PATH" \ + && test_env_var_dir "LIBAOM_TEST_DATA_PATH" +} + +# Greps aom_config.h in LIBAOM_CONFIG_PATH for positional parameter one, which +# should be a LIBAOM preprocessor flag. Echoes yes to stdout when the feature +# is available. +aom_config_option_enabled() { + aom_config_option="${1}" + aom_config_file="${LIBAOM_CONFIG_PATH}/config/aom_config.h" + config_line=$(grep "${aom_config_option}" "${aom_config_file}") + if echo "${config_line}" | egrep -q '1$'; then + echo yes + fi +} + +# Echoes yes when output of test_configuration_target() contains win32 or win64. +is_windows_target() { + if test_configuration_target \ + | grep -q -e win32 -e win64 > /dev/null 2>&1; then + echo yes + fi +} + +# Echoes path to $1 when it's executable and exists in one of the directories +# included in $tool_paths, or an empty string. Caller is responsible for testing +# the string once the function returns. +aom_tool_path() { + local tool_name="$1" + local root_path="${LIBAOM_BIN_PATH}" + local suffix="${AOM_TEST_EXE_SUFFIX}" + local tool_paths="\ + ${root_path}/${tool_name}${suffix} \ + ${root_path}/../${tool_name}${suffix} \ + ${root_path}/tools/${tool_name}${suffix} \ + ${root_path}/../tools/${tool_name}${suffix}" + + local toolpath="" + + for tool_path in ${tool_paths}; do + if [ -x "${tool_path}" ] && [ -f "${tool_path}" ]; then + echo "${tool_path}" + return 0 + fi + done + + return 1 +} + +# Echoes yes to stdout when the file named by positional parameter one exists +# in LIBAOM_BIN_PATH, and is executable. +aom_tool_available() { + local tool_name="$1" + local tool="${LIBAOM_BIN_PATH}/${tool_name}${AOM_TEST_EXE_SUFFIX}" + [ -x "${tool}" ] && echo yes +} + +# Echoes yes to stdout when aom_config_option_enabled() reports yes for +# CONFIG_AV1_DECODER. +av1_decode_available() { + [ "$(aom_config_option_enabled CONFIG_AV1_DECODER)" = "yes" ] && echo yes +} + +# Echoes yes to stdout when aom_config_option_enabled() reports yes for +# CONFIG_AV1_ENCODER. +av1_encode_available() { + [ "$(aom_config_option_enabled CONFIG_AV1_ENCODER)" = "yes" ] && echo yes +} + +# Echoes "fast" encode params for use with aomenc. +aomenc_encode_test_fast_params() { + echo "--cpu-used=1 + --limit=${AV1_ENCODE_TEST_FRAME_LIMIT} + --lag-in-frames=0 + --test-decode=fatal" +} + +# Echoes yes to stdout when aom_config_option_enabled() reports yes for +# CONFIG_WEBM_IO. +webm_io_available() { + [ "$(aom_config_option_enabled CONFIG_WEBM_IO)" = "yes" ] && echo yes +} + +# Filters strings from $1 using the filter specified by $2. Filter behavior +# depends on the presence of $3. When $3 is present, strings that match the +# filter are excluded. When $3 is omitted, strings matching the filter are +# included. +# The filtered result is echoed to stdout. +filter_strings() { + strings=${1} + filter=${2} + exclude=${3} + + if [ -n "${exclude}" ]; then + # When positional parameter three exists the caller wants to remove strings. + # Tell grep to invert matches using the -v argument. + exclude='-v' + else + unset exclude + fi + + if [ -n "${filter}" ]; then + for s in ${strings}; do + if echo "${s}" | egrep -q ${exclude} "${filter}" > /dev/null 2>&1; then + filtered_strings="${filtered_strings} ${s}" + fi + done + else + filtered_strings="${strings}" + fi + echo "${filtered_strings}" +} + +# Runs user test functions passed via positional parameters one and two. +# Functions in positional parameter one are treated as environment verification +# functions and are run unconditionally. Functions in positional parameter two +# are run according to the rules specified in aom_test_usage(). +run_tests() { + local env_tests="verify_aom_test_environment $1" + local tests_to_filter="$2" + local test_name="${AOM_TEST_NAME}" + + if [ -z "${test_name}" ]; then + test_name="$(basename "${0%.*}")" + fi + + if [ "${AOM_TEST_RUN_DISABLED_TESTS}" != "yes" ]; then + # Filter out DISABLED tests. + tests_to_filter=$(filter_strings "${tests_to_filter}" ^DISABLED exclude) + fi + + if [ -n "${AOM_TEST_FILTER}" ]; then + # Remove tests not matching the user's filter. + tests_to_filter=$(filter_strings "${tests_to_filter}" ${AOM_TEST_FILTER}) + fi + + # User requested test listing: Dump test names and return. + if [ "${AOM_TEST_LIST_TESTS}" = "yes" ]; then + for test_name in $tests_to_filter; do + echo ${test_name} + done + return + fi + + # Don't bother with the environment tests if everything else was disabled. + [ -z "${tests_to_filter}" ] && return + + # Combine environment and actual tests. + local tests_to_run="${env_tests} ${tests_to_filter}" + + check_version_strings + + # Run tests. + for test in ${tests_to_run}; do + test_begin "${test}" + vlog " RUN ${test}" + "${test}" + vlog " PASS ${test}" + test_end "${test}" + done + + local tested_config="$(test_configuration_target) @ $(source_version)" + echo "${test_name}: Done, all tests pass for ${tested_config}." +} + +aom_test_usage() { +cat << EOF + Usage: ${0##*/} [arguments] + --bin-path <path to libaom binaries directory> + --config-path <path to libaom config directory> + --filter <filter>: User test filter. Only tests matching filter are run. + --run-disabled-tests: Run disabled tests. + --help: Display this message and exit. + --test-data-path <path to libaom test data directory> + --show-program-output: Shows output from all programs being tested. + --prefix: Allows for a user specified prefix to be inserted before all test + programs. Grants the ability, for example, to run test programs + within valgrind. + --list-tests: List all test names and exit without actually running tests. + --verbose: Verbose output. + + When the --bin-path option is not specified the script attempts to use + \$LIBAOM_BIN_PATH and then the current directory. + + When the --config-path option is not specified the script attempts to use + \$LIBAOM_CONFIG_PATH and then the current directory. + + When the -test-data-path option is not specified the script attempts to use + \$LIBAOM_TEST_DATA_PATH and then the current directory. +EOF +} + +# Returns non-zero (failure) when required environment variables are empty +# strings. +aom_test_check_environment() { + if [ -z "${LIBAOM_BIN_PATH}" ] || \ + [ -z "${LIBAOM_CONFIG_PATH}" ] || \ + [ -z "${LIBAOM_TEST_DATA_PATH}" ]; then + return 1 + fi +} + +# Echo aomenc command line parameters allowing use of a raw yuv file as +# input to aomenc. +yuv_raw_input() { + echo ""${YUV_RAW_INPUT}" + --width="${YUV_RAW_INPUT_WIDTH}" + --height="${YUV_RAW_INPUT_HEIGHT}"" +} + +# Do a small encode for testing decoders. +encode_yuv_raw_input_av1() { + if [ "$(av1_encode_available)" = "yes" ]; then + local output="$1" + local encoder="$(aom_tool_path aomenc)" + shift + eval "${encoder}" $(yuv_raw_input) \ + $(aomenc_encode_test_fast_params) \ + --output="${output}" \ + $@ \ + ${devnull} + + if [ ! -e "${output}" ]; then + elog "Output file does not exist." + return 1 + fi + fi +} + +# Parse the command line. +while [ -n "$1" ]; do + case "$1" in + --bin-path) + LIBAOM_BIN_PATH="$2" + shift + ;; + --config-path) + LIBAOM_CONFIG_PATH="$2" + shift + ;; + --filter) + AOM_TEST_FILTER="$2" + shift + ;; + --run-disabled-tests) + AOM_TEST_RUN_DISABLED_TESTS=yes + ;; + --help) + aom_test_usage + exit + ;; + --test-data-path) + LIBAOM_TEST_DATA_PATH="$2" + shift + ;; + --prefix) + AOM_TEST_PREFIX="$2" + shift + ;; + --verbose) + AOM_TEST_VERBOSE_OUTPUT=yes + ;; + --show-program-output) + devnull= + ;; + --list-tests) + AOM_TEST_LIST_TESTS=yes + ;; + *) + aom_test_usage + exit 1 + ;; + esac + shift +done + +# Handle running the tests from a build directory without arguments when running +# the tests on *nix/macosx. +LIBAOM_BIN_PATH="${LIBAOM_BIN_PATH:-.}" +LIBAOM_CONFIG_PATH="${LIBAOM_CONFIG_PATH:-.}" +LIBAOM_TEST_DATA_PATH="${LIBAOM_TEST_DATA_PATH:-.}" + +# Create a temporary directory for output files, and a trap to clean it up. +if [ -n "${TMPDIR}" ]; then + AOM_TEST_TEMP_ROOT="${TMPDIR}" +elif [ -n "${TEMPDIR}" ]; then + AOM_TEST_TEMP_ROOT="${TEMPDIR}" +else + AOM_TEST_TEMP_ROOT=/tmp +fi + +AOM_TEST_OUTPUT_DIR="${AOM_TEST_OUTPUT_DIR:-${AOM_TEST_TEMP_ROOT}/aom_test_$$}" + +if ! mkdir -p "${AOM_TEST_OUTPUT_DIR}" || \ + [ ! -d "${AOM_TEST_OUTPUT_DIR}" ]; then + echo "${0##*/}: Cannot create output directory, giving up." + echo "${0##*/}: AOM_TEST_OUTPUT_DIR=${AOM_TEST_OUTPUT_DIR}" + exit 1 +fi + +AOM_TEST_PRESERVE_OUTPUT=${AOM_TEST_PRESERVE_OUTPUT:-no} + +if [ "$(is_windows_target)" = "yes" ]; then + AOM_TEST_EXE_SUFFIX=".exe" +fi + +# Variables shared by tests. +AV1_ENCODE_CPU_USED=${AV1_ENCODE_CPU_USED:-1} +AV1_ENCODE_TEST_FRAME_LIMIT=${AV1_ENCODE_TEST_FRAME_LIMIT:-5} +AV1_IVF_FILE="${AV1_IVF_FILE:-${AOM_TEST_OUTPUT_DIR}/av1.ivf}" +AV1_OBU_ANNEXB_FILE="${AV1_OBU_ANNEXB_FILE:-${AOM_TEST_OUTPUT_DIR}/av1.annexb.obu}" +AV1_OBU_SEC5_FILE="${AV1_OBU_SEC5_FILE:-${AOM_TEST_OUTPUT_DIR}/av1.section5.obu}" +AV1_WEBM_FILE="${AV1_WEBM_FILE:-${AOM_TEST_OUTPUT_DIR}/av1.webm}" + +YUV_RAW_INPUT="${LIBAOM_TEST_DATA_PATH}/hantro_collage_w352h288.yuv" +YUV_RAW_INPUT_WIDTH=352 +YUV_RAW_INPUT_HEIGHT=288 + +Y4M_NOSQ_PAR_INPUT="${LIBAOM_TEST_DATA_PATH}/park_joy_90p_8_420_a10-1.y4m" +Y4M_720P_INPUT="${LIBAOM_TEST_DATA_PATH}/niklas_1280_720_30.y4m" + +# Setup a trap function to clean up after tests complete. +trap cleanup EXIT + +vlog "$(basename "${0%.*}") test configuration: + LIBAOM_BIN_PATH=${LIBAOM_BIN_PATH} + LIBAOM_CONFIG_PATH=${LIBAOM_CONFIG_PATH} + LIBAOM_TEST_DATA_PATH=${LIBAOM_TEST_DATA_PATH} + AOM_TEST_EXE_SUFFIX=${AOM_TEST_EXE_SUFFIX} + AOM_TEST_FILTER=${AOM_TEST_FILTER} + AOM_TEST_LIST_TESTS=${AOM_TEST_LIST_TESTS} + AOM_TEST_OUTPUT_DIR=${AOM_TEST_OUTPUT_DIR} + AOM_TEST_PREFIX=${AOM_TEST_PREFIX} + AOM_TEST_PRESERVE_OUTPUT=${AOM_TEST_PRESERVE_OUTPUT} + AOM_TEST_RUN_DISABLED_TESTS=${AOM_TEST_RUN_DISABLED_TESTS} + AOM_TEST_SHOW_PROGRAM_OUTPUT=${AOM_TEST_SHOW_PROGRAM_OUTPUT} + AOM_TEST_TEMP_ROOT=${AOM_TEST_TEMP_ROOT} + AOM_TEST_VERBOSE_OUTPUT=${AOM_TEST_VERBOSE_OUTPUT} + AV1_ENCODE_CPU_USED=${AV1_ENCODE_CPU_USED} + AV1_ENCODE_TEST_FRAME_LIMIT=${AV1_ENCODE_TEST_FRAME_LIMIT} + AV1_IVF_FILE=${AV1_IVF_FILE} + AV1_OBU_ANNEXB_FILE=${AV1_OBU_ANNEXB_FILE} + AV1_OBU_SEC5_FILE=${AV1_OBU_SEC5_FILE} + AV1_WEBM_FILE=${AV1_WEBM_FILE} + YUV_RAW_INPUT=${YUV_RAW_INPUT} + YUV_RAW_INPUT_WIDTH=${YUV_RAW_INPUT_WIDTH} + YUV_RAW_INPUT_HEIGHT=${YUV_RAW_INPUT_HEIGHT} + Y4M_NOSQ_PAR_INPUT=${Y4M_NOSQ_PAR_INPUT}" + +fi # End $AOM_TEST_TOOLS_COMMON_SH pseudo include guard. |