From 36d22d82aa202bb199967e9512281e9a53db42c9 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 21:33:14 +0200 Subject: Adding upstream version 115.7.0esr. Signed-off-by: Daniel Baumann --- ipc/chromium/src/base/file_path.cc | 313 +++++++++++++++++++++++++++++++++++++ 1 file changed, 313 insertions(+) create mode 100644 ipc/chromium/src/base/file_path.cc (limited to 'ipc/chromium/src/base/file_path.cc') diff --git a/ipc/chromium/src/base/file_path.cc b/ipc/chromium/src/base/file_path.cc new file mode 100644 index 0000000000..6afb7d9b86 --- /dev/null +++ b/ipc/chromium/src/base/file_path.cc @@ -0,0 +1,313 @@ +/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* vim: set ts=8 sts=2 et sw=2 tw=80: */ +// Copyright (c) 2008 The Chromium Authors. All rights reserved. +// Use of this source code is governed by a BSD-style license that can be +// found in the LICENSE file. + +#include + +#include "base/file_path.h" +#include "base/logging.h" + +// These includes are just for the *Hack functions, and should be removed +// when those functions are removed. +#include "base/string_piece.h" +#include "base/string_util.h" +#include "base/sys_string_conversions.h" + +#if defined(FILE_PATH_USES_WIN_SEPARATORS) +const FilePath::CharType FilePath::kSeparators[] = FILE_PATH_LITERAL("\\/"); +#else // FILE_PATH_USES_WIN_SEPARATORS +const FilePath::CharType FilePath::kSeparators[] = FILE_PATH_LITERAL("/"); +#endif // FILE_PATH_USES_WIN_SEPARATORS + +const FilePath::CharType FilePath::kCurrentDirectory[] = FILE_PATH_LITERAL("."); +const FilePath::CharType FilePath::kParentDirectory[] = FILE_PATH_LITERAL(".."); + +const FilePath::CharType FilePath::kExtensionSeparator = FILE_PATH_LITERAL('.'); + +namespace { + +// If this FilePath contains a drive letter specification, returns the +// position of the last character of the drive letter specification, +// otherwise returns npos. This can only be true on Windows, when a pathname +// begins with a letter followed by a colon. On other platforms, this always +// returns npos. +FilePath::StringType::size_type FindDriveLetter( + const FilePath::StringType& path) { +#if defined(FILE_PATH_USES_DRIVE_LETTERS) + // This is dependent on an ASCII-based character set, but that's a + // reasonable assumption. iswalpha can be too inclusive here. + if (path.length() >= 2 && path[1] == L':' && + ((path[0] >= L'A' && path[0] <= L'Z') || + (path[0] >= L'a' && path[0] <= L'z'))) { + return 1; + } +#endif // FILE_PATH_USES_DRIVE_LETTERS + return FilePath::StringType::npos; +} + +bool IsPathAbsolute(const FilePath::StringType& path) { +#if defined(FILE_PATH_USES_DRIVE_LETTERS) + FilePath::StringType::size_type letter = FindDriveLetter(path); + if (letter != FilePath::StringType::npos) { + // Look for a separator right after the drive specification. + return path.length() > letter + 1 && + FilePath::IsSeparator(path[letter + 1]); + } + // Look for a pair of leading separators. + return path.length() > 1 && FilePath::IsSeparator(path[0]) && + FilePath::IsSeparator(path[1]); +#else // FILE_PATH_USES_DRIVE_LETTERS + // Look for a separator in the first position. + return path.length() > 0 && FilePath::IsSeparator(path[0]); +#endif // FILE_PATH_USES_DRIVE_LETTERS +} + +} // namespace + +bool FilePath::IsSeparator(CharType character) { + for (size_t i = 0; i < arraysize(kSeparators) - 1; ++i) { + if (character == kSeparators[i]) { + return true; + } + } + + return false; +} + +// libgen's dirname and basename aren't guaranteed to be thread-safe and aren't +// guaranteed to not modify their input strings, and in fact are implemented +// differently in this regard on different platforms. Don't use them, but +// adhere to their behavior. +FilePath FilePath::DirName() const { + FilePath new_path(path_); + new_path.StripTrailingSeparatorsInternal(); + + // The drive letter, if any, always needs to remain in the output. If there + // is no drive letter, as will always be the case on platforms which do not + // support drive letters, letter will be npos, or -1, so the comparisons and + // resizes below using letter will still be valid. + StringType::size_type letter = FindDriveLetter(new_path.path_); + + StringType::size_type last_separator = new_path.path_.find_last_of( + kSeparators, StringType::npos, arraysize(kSeparators) - 1); + if (last_separator == StringType::npos) { + // path_ is in the current directory. + new_path.path_.resize(letter + 1); + } else if (last_separator == letter + 1) { + // path_ is in the root directory. + new_path.path_.resize(letter + 2); + } else if (last_separator == letter + 2 && + IsSeparator(new_path.path_[letter + 1])) { + // path_ is in "//" (possibly with a drive letter); leave the double + // separator intact indicating alternate root. + new_path.path_.resize(letter + 3); + } else if (last_separator != 0) { + // path_ is somewhere else, trim the basename. + new_path.path_.resize(last_separator); + } + + new_path.StripTrailingSeparatorsInternal(); + if (!new_path.path_.length()) new_path.path_ = kCurrentDirectory; + + return new_path; +} + +FilePath FilePath::BaseName() const { + FilePath new_path(path_); + new_path.StripTrailingSeparatorsInternal(); + + // The drive letter, if any, is always stripped. + StringType::size_type letter = FindDriveLetter(new_path.path_); + if (letter != StringType::npos) { + new_path.path_.erase(0, letter + 1); + } + + // Keep everything after the final separator, but if the pathname is only + // one character and it's a separator, leave it alone. + StringType::size_type last_separator = new_path.path_.find_last_of( + kSeparators, StringType::npos, arraysize(kSeparators) - 1); + if (last_separator != StringType::npos && + last_separator < new_path.path_.length() - 1) { + new_path.path_.erase(0, last_separator + 1); + } + + return new_path; +} + +FilePath::StringType FilePath::Extension() const { + // BaseName() calls StripTrailingSeparators, so cases like /foo.baz/// work. + StringType base = BaseName().value(); + + // Special case "." and ".." + if (base == kCurrentDirectory || base == kParentDirectory) + return StringType(); + + const StringType::size_type last_dot = base.rfind(kExtensionSeparator); + if (last_dot == StringType::npos) return StringType(); + return StringType(base, last_dot); +} + +FilePath FilePath::RemoveExtension() const { + StringType ext = Extension(); + // It's important to check Extension() since that verifies that the + // kExtensionSeparator actually appeared in the last path component. + if (ext.empty()) return FilePath(path_); + // Since Extension() verified that the extension is in fact in the last path + // component, this substr will effectively strip trailing separators. + const StringType::size_type last_dot = path_.rfind(kExtensionSeparator); + return FilePath(path_.substr(0, last_dot)); +} + +FilePath FilePath::InsertBeforeExtension(const StringType& suffix) const { + if (suffix.empty()) return FilePath(path_); + + if (path_.empty()) return FilePath(); + + StringType base = BaseName().value(); + if (base.empty()) return FilePath(); + if (*(base.end() - 1) == kExtensionSeparator) { + // Special case "." and ".." + if (base == kCurrentDirectory || base == kParentDirectory) { + return FilePath(); + } + } + + StringType ext = Extension(); + StringType ret = RemoveExtension().value(); + ret.append(suffix); + ret.append(ext); + return FilePath(ret); +} + +FilePath FilePath::ReplaceExtension(const StringType& extension) const { + if (path_.empty()) return FilePath(); + + StringType base = BaseName().value(); + if (base.empty()) return FilePath(); + if (*(base.end() - 1) == kExtensionSeparator) { + // Special case "." and ".." + if (base == kCurrentDirectory || base == kParentDirectory) { + return FilePath(); + } + } + + FilePath no_ext = RemoveExtension(); + // If the new extension is "" or ".", then just remove the current extension. + if (extension.empty() || extension == StringType(1, kExtensionSeparator)) + return no_ext; + + StringType str = no_ext.value(); + if (extension[0] != kExtensionSeparator) str.append(1, kExtensionSeparator); + str.append(extension); + return FilePath(str); +} + +FilePath FilePath::Append(const StringType& component) const { + DCHECK(!IsPathAbsolute(component)); + if (path_.compare(kCurrentDirectory) == 0) { + // Append normally doesn't do any normalization, but as a special case, + // when appending to kCurrentDirectory, just return a new path for the + // component argument. Appending component to kCurrentDirectory would + // serve no purpose other than needlessly lengthening the path, and + // it's likely in practice to wind up with FilePath objects containing + // only kCurrentDirectory when calling DirName on a single relative path + // component. + return FilePath(component); + } + + FilePath new_path(path_); + new_path.StripTrailingSeparatorsInternal(); + + // Don't append a separator if the path is empty (indicating the current + // directory) or if the path component is empty (indicating nothing to + // append). + if (component.length() > 0 && new_path.path_.length() > 0) { + // Don't append a separator if the path still ends with a trailing + // separator after stripping (indicating the root directory). + if (!IsSeparator(new_path.path_[new_path.path_.length() - 1])) { + // Don't append a separator if the path is just a drive letter. + if (FindDriveLetter(new_path.path_) + 1 != new_path.path_.length()) { + new_path.path_.append(1, kSeparators[0]); + } + } + } + + new_path.path_.append(component); + return new_path; +} + +FilePath FilePath::Append(const FilePath& component) const { + return Append(component.value()); +} + +FilePath FilePath::AppendASCII(const std::string& component) const { + DCHECK(IsStringASCII(component)); +#if defined(OS_WIN) + return Append(ASCIIToWide(component)); +#elif defined(OS_POSIX) + return Append(component); +#endif +} + +bool FilePath::IsAbsolute() const { return IsPathAbsolute(path_); } + +#if defined(OS_POSIX) +// See file_path.h for a discussion of the encoding of paths on POSIX +// platforms. These *Hack() functions are not quite correct, but they're +// only temporary while we fix the remainder of the code. +// Remember to remove the #includes at the top when you remove these. + +// static +FilePath FilePath::FromWStringHack(const std::wstring& wstring) { + return FilePath(base::SysWideToNativeMB(wstring)); +} +std::wstring FilePath::ToWStringHack() const { + return base::SysNativeMBToWide(path_); +} +#elif defined(OS_WIN) +// static +FilePath FilePath::FromWStringHack(const std::wstring& wstring) { + return FilePath(wstring); +} +std::wstring FilePath::ToWStringHack() const { return path_; } +#endif + +void FilePath::OpenInputStream(std::ifstream& stream) const { + stream.open( +#ifndef __MINGW32__ + path_.c_str(), +#else + base::SysWideToNativeMB(path_).c_str(), +#endif + std::ios::in | std::ios::binary); +} + +FilePath FilePath::StripTrailingSeparators() const { + FilePath new_path(path_); + new_path.StripTrailingSeparatorsInternal(); + + return new_path; +} + +void FilePath::StripTrailingSeparatorsInternal() { + // If there is no drive letter, start will be 1, which will prevent stripping + // the leading separator if there is only one separator. If there is a drive + // letter, start will be set appropriately to prevent stripping the first + // separator following the drive letter, if a separator immediately follows + // the drive letter. + StringType::size_type start = FindDriveLetter(path_) + 2; + + StringType::size_type last_stripped = StringType::npos; + for (StringType::size_type pos = path_.length(); + pos > start && IsSeparator(path_[pos - 1]); --pos) { + // If the string only has two separators and they're at the beginning, + // don't strip them, unless the string began with more than two separators. + if (pos != start + 1 || last_stripped == start + 2 || + !IsSeparator(path_[start - 1])) { + path_.resize(pos - 1); + last_stripped = pos; + } + } +} -- cgit v1.2.3