From 36d22d82aa202bb199967e9512281e9a53db42c9 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 21:33:14 +0200 Subject: Adding upstream version 115.7.0esr. Signed-off-by: Daniel Baumann --- tools/jprof/README.html | 330 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 330 insertions(+) create mode 100644 tools/jprof/README.html (limited to 'tools/jprof/README.html') diff --git a/tools/jprof/README.html b/tools/jprof/README.html new file mode 100644 index 0000000000..ac25acc5ef --- /dev/null +++ b/tools/jprof/README.html @@ -0,0 +1,330 @@ + + + +The Jprof Profiler + + +
+

The Jprof Profiler

+ +jim_nance@yahoo.com

+Recent (4/2011) updates Randell Jesup (see bugzilla for contact info) + +

+ +Introduction | Operation | +Setup | Usage | +Interpretation + +
+
+ +

Introduction

+ +Jprof is a profiling tool. I am writing it because I need to find out +where mozilla is spending its time, and there do not seem to be any +profilers for Linux that can handle threads and/or shared libraries. +This code is based heavily on Kipp Hickman's leaky. + +

Operation

+ +Jprof operates by installing a timer which periodically interrupts mozilla. +When this timer goes off, the jprof code inside mozilla walks the function call +stack to determine which code was executing and saves the results into the +jprof-log and jprof-map files. By collecting a large +number of these call stacks, it is possible to deduce where mozilla is spending +its time. + +

Setup

+ +

Configure your mozilla with jprof support by adding +--enable-jprof to your configure options (eg adding +ac_add_options --enable-jprof to your .mozconfig) and +making sure that you do not have the +--enable-strip configure option set -- jprof needs symbols to +operate. On many architectures with GCC, you'll need to add +--enable-optimize="-O3 -fno-omit-frame-pointer" or the +equivalent to ensure frame pointer generation in the compiler you're using.

+ +

Finally, build mozilla with your new configuration. Now you can run jprof.

+ +

Usage

+
 jprof [-v] [-t] [-e exclude] [-i include] [-s stackdepth] [--last] [--all] [--start n [--end m]] [--output-dir dir] prog log [log2 ...]
+Options: + +The behavior of jprof is determined by the value of the JPROF_FLAGS environment +variable. This environment variable can be composed of several substrings +which have the following meanings: + + +

Starting and stopping jprof from JavaScript

+

+A build with jprof enabled adds four functions to the Window object:

+JProfStartProfiling() and JProfStopProfiling(): When used with JP_DEFER, these +allow one to start and stop the timer just around whatever critical section is +being profiled.

+JProfClearCircular() and JProfSaveCircular(): +These clear the circular buffer and save the buffer (without stopping), respectively.

+ +

Examples of JPROF_FLAGS usage

+ + +

Pausing profiles

+ +

jprof can be paused at any time by sending a SIGUSR1 to mozilla (kill +-USR1). This will cause the timer signals to stop and jprof-map to be +written, but it will not close jprof-log. Combining SIGUSR1 with the JP_DEFER +option allows profiling of one sequence of actions by starting the timer right +before starting the actions and stopping the timer right afterward. + +

After a SIGUSR1, sending another timer signal (SIGPROF, SIGALRM, or SIGPOLL (aka SIGIO), +depending on the mode) can be used to continue writing data to the same +output. + +

SIGUSR2 will cause the circular buffer to be cleared, if it's in use. +This is useful right before running a test when you're using a large, +continuous circular buffer, or programmatically at the start of an action +which might take too long (JProfClearCircular()). + +

Looking at the results

+ +Now that we have jprof-log and jprof-map files, we +can use the jprof executable is used to turn them into readable output. To do +this jprof needs the name of the mozilla binary and the log file. It deduces +the name of the map file: + +
+  ./jprof /home/user/mozilla/objdir/dist/bin/firefox ./jprof-log > tmp.html
+
+ +This will generate the file tmp.html which you should view in a +web browser. + +
+  ./jprof --output-dir=/tmp /home/user/mozilla/objdir/dist/bin/firefox ./jprof-log*
+
+ +This will generate a set of files in /tmp for each process. + + +

Interpretation

+ + +The Jprof output is split into a flat portion and a hierarchical portion. +There are links to each section at the top of the page. It is typically +easier to analyze the profile by starting with the flat output and following +the links contained in the flat output up to the hierarchical output. + +

Flat output

+ +The flat portion of the profile indicates which functions were executing +when the timer was going off. It is displayed as a list of functions names +on the right and the number of times that function was interrupted on the +left. The list is sorted by decreasing interrupt count. For example: + +
+Total hit count: 151603
+Count %Total  Function Name
+
+8806   5.8     __libc_poll
+2254   1.5     __i686.get_pc_thunk.bx
+2053   1.4     _int_malloc
+1777   1.2     ComputedStyle::GetStyleData(nsStyleStructID)
+1600   1.1     __libc_malloc
+1552   1.0     nsCOMPtr_base::~nsCOMPtr_base()
+
+ +This shows that of the 151603 times the timer fired, 1777 (1.2% of the total) were inside ComputedStyle::GetStyleData() and 1552 (1.0% of the total) were in the nsCOMPtr_base destructor. + +

+In general, the functions with the highest count are the functions which +are taking the most time. + +

+The function names are linked to the entry for that function in the +hierarchical profile, which is described in the next section. + +

Hierarchical output

+ +The hierarchical output is divided up into sections, with each section +corresponding to one function. A typical section looks something like +this: + +
+ index  Count         Hits      Function Name
+                           545 (46.4%) nsBlockFrame::ReflowInlineFrames(nsBlockReflowState&, nsLineList_iterator, int*)
+                           100 (8.5%)  nsBlockFrame::ReflowDirtyLines(nsBlockReflowState&)
+ 72870      4 (0.3%)       645 (54.9%) nsBlockFrame::DoReflowInlineFrames(nsBlockReflowState&, nsLineLayout&, nsLineList_iterator, nsFlowAreaRect&, int&, nsFloatManager::SavedState*, int*, LineReflowStatus*, int)
+                           545 (46.4%) nsBlockFrame::ReflowInlineFrame(nsBlockReflowState&, nsLineLayout&, nsLineList_iterator, nsIFrame*, LineReflowStatus*)
+                            83 (7.1%)  nsBlockFrame::PlaceLine(nsBlockReflowState&, nsLineLayout&, nsLineList_iterator, nsFloatManager::SavedState*, nsRect&, int&, int*)
+                             9 (0.8%)  nsLineLayout::BeginLineReflow(int, int, int, int, int, int)
+                             1 (0.1%)  nsTextFrame::GetType() const
+                             1 (0.1%)  nsLineLayout::RelativePositionFrames(nsOverflowAreas&)
+                             1 (0.1%)  __i686.get_pc_thunk.bx
+                             1 (0.1%)  PL_ArenaAllocate
+
+ +The information this block tells us is: + + + + +The rest of this section explains how to read this information off from the jprof output. + +

This block corresponds to the function nsBlockFrame::DoReflowInlineFrames, which is +therefore bolded and not a link. The name of this function is preceded by +five numbers which have the following meaning. The number on the left (72870) +is the index number, and is not important. The next number (4) and the +percentage following (0.3%) are the number +of times this function was interrupted by the timer and the percentage of +the total hits that is. The last number pair ("645 (54.9%)") +are the number of times this function was in the call stack when the timer went +off. That is, the timer went off while we were in code that was ultimately +called from nsBlockFrame::DoReflowInlineFrames. +

For our example we can see that our function was in the call stack for +645 interrupt ticks, but we were only the function that was running when +the interrupt arrived 4 times. +

+The functions listed above the line for nsBlockFrame::DoReflowInlineFrames are its +callers. The numbers to the left of these function names are the numbers of +times these functions were in the call stack as callers of +nsBlockFrame::DoReflowInlineFrames. In our example, we were called 545 times by +nsBlockFrame::ReflowInlineFrames and 100 times by +nsBlockFrame::ReflowDirtyLines. +

+The functions listed below the line for nsBlockFrame::DoReflowInlineFrames are its +callees. The numbers to the left of the function names are the numbers of +times these functions were in the callstack as callees of +nsBlockFrame::DoReflowInlineFrames and the corresponding percentages. In our example, of the 645 profiler hits under nsBlockFrame::DoReflowInlineFrames 545 were under nsBlockFrame::ReflowInlineFrame, 83 were under nsBlockFrame::PlaceLine, and so forth.

+ +NOTE: If there are loops of execution or recursion, the numbers will +not add up and percentages can exceed 100%. If a function directly calls +itself "(self)" will be appended to the line, but indirect recursion will +not be marked. + +

Bugs

+The current build of Jprof has only been tested under Ubuntu 8.04 LTS, but +should work under any fairly modern linux distribution using GCC/GLIBC. +Please update this document with any known compatibilities/incompatibilities. +

+If you get an error:

Inconsistency detected by ld.so: dl-open.c: 260: dl_open_worker: Assertion `_dl_debug_initialize (0, args->nsid)->r_state == RT_CONSISTENT' failed! +

that means you've hit a timing hole in the version of glibc you're +running. See Redhat bug 4578. + + + + -- cgit v1.2.3