/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*-
 * vim: set ts=8 sts=2 et sw=2 tw=80:
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include "jit/mips32/MoveEmitter-mips32.h"

#include "jit/MacroAssembler-inl.h"

using namespace js;
using namespace js::jit;

void MoveEmitterMIPS::breakCycle(const MoveOperand& from, const MoveOperand& to,
                                 MoveOp::Type type, uint32_t slotId) {
  // There is some pattern:
  //   (A -> B)
  //   (B -> A)
  //
  // This case handles (A -> B), which we reach first. We save B, then allow
  // the original move to continue.
  switch (type) {
    case MoveOp::FLOAT32:
      if (to.isMemory()) {
        FloatRegister temp = ScratchFloat32Reg;
        masm.loadFloat32(getAdjustedAddress(to), temp);
        // Since it is uncertain if the load will be aligned or not
        // just fill both of them with the same value.
        masm.storeFloat32(temp, cycleSlot(slotId, 0));
        masm.storeFloat32(temp, cycleSlot(slotId, 4));
      } else {
        // Just always store the largest possible size.
        masm.storeDouble(to.floatReg().doubleOverlay(), cycleSlot(slotId, 0));
      }
      break;
    case MoveOp::DOUBLE:
      if (to.isMemory()) {
        FloatRegister temp = ScratchDoubleReg;
        masm.loadDouble(getAdjustedAddress(to), temp);
        masm.storeDouble(temp, cycleSlot(slotId, 0));
      } else {
        masm.storeDouble(to.floatReg(), cycleSlot(slotId, 0));
      }
      break;
    case MoveOp::INT32:
      MOZ_ASSERT(sizeof(uintptr_t) == sizeof(int32_t));
      [[fallthrough]];
    case MoveOp::GENERAL:
      if (to.isMemory()) {
        Register temp = tempReg();
        masm.loadPtr(getAdjustedAddress(to), temp);
        masm.storePtr(temp, cycleSlot(0, 0));
      } else {
        // Second scratch register should not be moved by MoveEmitter.
        MOZ_ASSERT(to.reg() != spilledReg_);
        masm.storePtr(to.reg(), cycleSlot(0, 0));
      }
      break;
    default:
      MOZ_CRASH("Unexpected move type");
  }
}

void MoveEmitterMIPS::completeCycle(const MoveOperand& from,
                                    const MoveOperand& to, MoveOp::Type type,
                                    uint32_t slotId) {
  // There is some pattern:
  //   (A -> B)
  //   (B -> A)
  //
  // This case handles (B -> A), which we reach last. We emit a move from the
  // saved value of B, to A.
  switch (type) {
    case MoveOp::FLOAT32:
      if (to.isMemory()) {
        FloatRegister temp = ScratchFloat32Reg;
        masm.loadFloat32(cycleSlot(slotId, 0), temp);
        masm.storeFloat32(temp, getAdjustedAddress(to));
      } else {
        uint32_t offset = 0;
        if (from.floatReg().numAlignedAliased() == 1) {
          offset = sizeof(float);
        }
        masm.loadFloat32(cycleSlot(slotId, offset), to.floatReg());
      }
      break;
    case MoveOp::DOUBLE:
      if (to.isMemory()) {
        FloatRegister temp = ScratchDoubleReg;
        masm.loadDouble(cycleSlot(slotId, 0), temp);
        masm.storeDouble(temp, getAdjustedAddress(to));
      } else {
        masm.loadDouble(cycleSlot(slotId, 0), to.floatReg());
      }
      break;
    case MoveOp::INT32:
      MOZ_ASSERT(sizeof(uintptr_t) == sizeof(int32_t));
      [[fallthrough]];
    case MoveOp::GENERAL:
      MOZ_ASSERT(slotId == 0);
      if (to.isMemory()) {
        Register temp = tempReg();
        masm.loadPtr(cycleSlot(0, 0), temp);
        masm.storePtr(temp, getAdjustedAddress(to));
      } else {
        // Second scratch register should not be moved by MoveEmitter.
        MOZ_ASSERT(to.reg() != spilledReg_);
        masm.loadPtr(cycleSlot(0, 0), to.reg());
      }
      break;
    default:
      MOZ_CRASH("Unexpected move type");
  }
}

void MoveEmitterMIPS::emitDoubleMove(const MoveOperand& from,
                                     const MoveOperand& to) {
  if (from.isFloatReg()) {
    if (to.isFloatReg()) {
      masm.moveDouble(from.floatReg(), to.floatReg());
    } else if (to.isGeneralRegPair()) {
      // Used for passing double parameter in a2,a3 register pair.
      // Two moves are added for one double parameter by
      // MacroAssembler::passABIArg
      MOZ_ASSERT(to.evenReg() == a2 && to.oddReg() == a3,
                 "Invalid emitDoubleMove arguments.");
      masm.moveFromDoubleLo(from.floatReg(), a2);
      masm.moveFromDoubleHi(from.floatReg(), a3);
    } else {
      MOZ_ASSERT(to.isMemory());
      masm.storeDouble(from.floatReg(), getAdjustedAddress(to));
    }
  } else if (to.isFloatReg()) {
    MOZ_ASSERT(from.isMemory());
    masm.loadDouble(getAdjustedAddress(from), to.floatReg());
  } else if (to.isGeneralRegPair()) {
    // Used for passing double parameter in a2,a3 register pair.
    // Two moves are added for one double parameter by
    // MacroAssembler::passABIArg
    MOZ_ASSERT(from.isMemory());
    MOZ_ASSERT(to.evenReg() == a2 && to.oddReg() == a3,
               "Invalid emitDoubleMove arguments.");
    masm.loadPtr(getAdjustedAddress(from), a2);
    masm.loadPtr(
        Address(from.base(), getAdjustedOffset(from) + sizeof(uint32_t)), a3);
  } else {
    MOZ_ASSERT(from.isMemory());
    MOZ_ASSERT(to.isMemory());
    masm.loadDouble(getAdjustedAddress(from), ScratchDoubleReg);
    masm.storeDouble(ScratchDoubleReg, getAdjustedAddress(to));
  }
}