// The use statement is needed for the `cargo docs` #[allow(unused_imports)] use crate::{Mmap, MmapMut}; /// Values supported by [Mmap::advise] and [MmapMut::advise] functions. /// See [madvise()](https://man7.org/linux/man-pages/man2/madvise.2.html) map page. #[repr(i32)] #[derive(Clone, Copy, Debug, Eq, PartialEq, Hash)] pub enum Advice { /// **MADV_NORMAL** /// /// No special treatment. This is the default. Normal = libc::MADV_NORMAL, /// **MADV_RANDOM** /// /// Expect page references in random order. (Hence, read /// ahead may be less useful than normally.) Random = libc::MADV_RANDOM, /// **MADV_SEQUENTIAL** /// /// Expect page references in sequential order. (Hence, pages /// in the given range can be aggressively read ahead, and may /// be freed soon after they are accessed.) Sequential = libc::MADV_SEQUENTIAL, /// **MADV_WILLNEED** /// /// Expect access in the near future. (Hence, it might be a /// good idea to read some pages ahead.) WillNeed = libc::MADV_WILLNEED, /// **MADV_DONTNEED** /// /// Do not expect access in the near future. (For the time /// being, the application is finished with the given range, /// so the kernel can free resources associated with it.) /// /// After a successful MADV_DONTNEED operation, the semantics /// of memory access in the specified region are changed: /// subsequent accesses of pages in the range will succeed, /// but will result in either repopulating the memory contents /// from the up-to-date contents of the underlying mapped file /// (for shared file mappings, shared anonymous mappings, and /// shmem-based techniques such as System V shared memory /// segments) or zero-fill-on-demand pages for anonymous /// private mappings. /// /// Note that, when applied to shared mappings, MADV_DONTNEED /// might not lead to immediate freeing of the pages in the /// range. The kernel is free to delay freeing the pages /// until an appropriate moment. The resident set size (RSS) /// of the calling process will be immediately reduced /// however. /// /// **MADV_DONTNEED** cannot be applied to locked pages, Huge TLB /// pages, or VM_PFNMAP pages. (Pages marked with the kernel- /// internal VM_PFNMAP flag are special memory areas that are /// not managed by the virtual memory subsystem. Such pages /// are typically created by device drivers that map the pages /// into user space.) DontNeed = libc::MADV_DONTNEED, // // The rest are Linux-specific // /// **MADV_FREE** - Linux (since Linux 4.5) and Darwin /// /// The application no longer requires the pages in the range /// specified by addr and len. The kernel can thus free these /// pages, but the freeing could be delayed until memory /// pressure occurs. For each of the pages that has been /// marked to be freed but has not yet been freed, the free /// operation will be canceled if the caller writes into the /// page. After a successful MADV_FREE operation, any stale /// data (i.e., dirty, unwritten pages) will be lost when the /// kernel frees the pages. However, subsequent writes to /// pages in the range will succeed and then kernel cannot /// free those dirtied pages, so that the caller can always /// see just written data. If there is no subsequent write, /// the kernel can free the pages at any time. Once pages in /// the range have been freed, the caller will see zero-fill- /// on-demand pages upon subsequent page references. /// /// The MADV_FREE operation can be applied only to private /// anonymous pages (see mmap(2)). In Linux before version /// 4.12, when freeing pages on a swapless system, the pages /// in the given range are freed instantly, regardless of /// memory pressure. #[cfg(any(target_os = "linux", target_os = "macos", target_os = "ios"))] Free = libc::MADV_FREE, /// **MADV_REMOVE** - Linux only (since Linux 2.6.16) /// /// Free up a given range of pages and its associated backing /// store. This is equivalent to punching a hole in the /// corresponding byte range of the backing store (see /// fallocate(2)). Subsequent accesses in the specified /// address range will see bytes containing zero. /// /// The specified address range must be mapped shared and /// writable. This flag cannot be applied to locked pages, /// Huge TLB pages, or VM_PFNMAP pages. /// /// In the initial implementation, only tmpfs(5) was supported /// **MADV_REMOVE**; but since Linux 3.5, any filesystem which /// supports the fallocate(2) FALLOC_FL_PUNCH_HOLE mode also /// supports MADV_REMOVE. Hugetlbfs fails with the error /// EINVAL and other filesystems fail with the error /// EOPNOTSUPP. #[cfg(target_os = "linux")] Remove = libc::MADV_REMOVE, /// **MADV_DONTFORK** - Linux only (since Linux 2.6.16) /// /// Do not make the pages in this range available to the child /// after a fork(2). This is useful to prevent copy-on-write /// semantics from changing the physical location of a page if /// the parent writes to it after a fork(2). (Such page /// relocations cause problems for hardware that DMAs into the /// page.) #[cfg(target_os = "linux")] DontFork = libc::MADV_DONTFORK, /// **MADV_DOFORK** - Linux only (since Linux 2.6.16) /// /// Undo the effect of MADV_DONTFORK, restoring the default /// behavior, whereby a mapping is inherited across fork(2). #[cfg(target_os = "linux")] DoFork = libc::MADV_DOFORK, /// **MADV_MERGEABLE** - Linux only (since Linux 2.6.32) /// /// Enable Kernel Samepage Merging (KSM) for the pages in the /// range specified by addr and length. The kernel regularly /// scans those areas of user memory that have been marked as /// mergeable, looking for pages with identical content. /// These are replaced by a single write-protected page (which /// is automatically copied if a process later wants to update /// the content of the page). KSM merges only private /// anonymous pages (see mmap(2)). /// /// The KSM feature is intended for applications that generate /// many instances of the same data (e.g., virtualization /// systems such as KVM). It can consume a lot of processing /// power; use with care. See the Linux kernel source file /// Documentation/admin-guide/mm/ksm.rst for more details. /// /// The MADV_MERGEABLE and MADV_UNMERGEABLE operations are /// available only if the kernel was configured with /// CONFIG_KSM. #[cfg(target_os = "linux")] Mergeable = libc::MADV_MERGEABLE, /// **MADV_UNMERGEABLE** - Linux only (since Linux 2.6.32) /// /// Undo the effect of an earlier MADV_MERGEABLE operation on /// the specified address range; KSM unmerges whatever pages /// it had merged in the address range specified by addr and /// length. #[cfg(target_os = "linux")] Unmergeable = libc::MADV_UNMERGEABLE, /// **MADV_HUGEPAGE** - Linux only (since Linux 2.6.38) /// /// Enable Transparent Huge Pages (THP) for pages in the range /// specified by addr and length. Currently, Transparent Huge /// Pages work only with private anonymous pages (see /// mmap(2)). The kernel will regularly scan the areas marked /// as huge page candidates to replace them with huge pages. /// The kernel will also allocate huge pages directly when the /// region is naturally aligned to the huge page size (see /// posix_memalign(2)). /// /// This feature is primarily aimed at applications that use /// large mappings of data and access large regions of that /// memory at a time (e.g., virtualization systems such as /// QEMU). It can very easily waste memory (e.g., a 2 MB /// mapping that only ever accesses 1 byte will result in 2 MB /// of wired memory instead of one 4 KB page). See the Linux /// kernel source file /// Documentation/admin-guide/mm/transhuge.rst for more /// details. /// /// Most common kernels configurations provide MADV_HUGEPAGE- /// style behavior by default, and thus MADV_HUGEPAGE is /// normally not necessary. It is mostly intended for /// embedded systems, where MADV_HUGEPAGE-style behavior may /// not be enabled by default in the kernel. On such systems, /// this flag can be used in order to selectively enable THP. /// Whenever MADV_HUGEPAGE is used, it should always be in /// regions of memory with an access pattern that the /// developer knows in advance won't risk to increase the /// memory footprint of the application when transparent /// hugepages are enabled. /// /// The MADV_HUGEPAGE and MADV_NOHUGEPAGE operations are /// available only if the kernel was configured with /// CONFIG_TRANSPARENT_HUGEPAGE. #[cfg(target_os = "linux")] HugePage = libc::MADV_HUGEPAGE, /// **MADV_NOHUGEPAGE** - Linux only (since Linux 2.6.38) /// /// Ensures that memory in the address range specified by addr /// and length will not be backed by transparent hugepages. #[cfg(target_os = "linux")] NoHugePage = libc::MADV_NOHUGEPAGE, /// **MADV_DONTDUMP** - Linux only (since Linux 3.4) /// /// Exclude from a core dump those pages in the range /// specified by addr and length. This is useful in /// applications that have large areas of memory that are /// known not to be useful in a core dump. The effect of /// **MADV_DONTDUMP** takes precedence over the bit mask that is /// set via the `/proc/[pid]/coredump_filter` file (see /// core(5)). #[cfg(target_os = "linux")] DontDump = libc::MADV_DONTDUMP, /// **MADV_DODUMP** - Linux only (since Linux 3.4) /// /// Undo the effect of an earlier MADV_DONTDUMP. #[cfg(target_os = "linux")] DoDump = libc::MADV_DODUMP, /// **MADV_HWPOISON** - Linux only (since Linux 2.6.32) /// /// Poison the pages in the range specified by addr and length /// and handle subsequent references to those pages like a /// hardware memory corruption. This operation is available /// only for privileged (CAP_SYS_ADMIN) processes. This /// operation may result in the calling process receiving a /// SIGBUS and the page being unmapped. /// /// This feature is intended for testing of memory error- /// handling code; it is available only if the kernel was /// configured with CONFIG_MEMORY_FAILURE. #[cfg(target_os = "linux")] HwPoison = libc::MADV_HWPOISON, /// **MADV_ZERO_WIRED_PAGES** - Darwin only /// /// Indicates that the application would like the wired pages in this address range to be /// zeroed out if the address range is deallocated without first unwiring the pages (i.e. /// a munmap(2) without a preceding munlock(2) or the application quits). This is used /// with madvise() system call. #[cfg(any(target_os = "macos", target_os = "ios"))] ZeroWiredPages = libc::MADV_ZERO_WIRED_PAGES, /// **MADV_FREE_REUSABLE** - Darwin only /// /// Behaves like **MADV_FREE**, but the freed pages are accounted for in the RSS of the process. #[cfg(any(target_os = "macos", target_os = "ios"))] FreeReusable = libc::MADV_FREE_REUSABLE, /// **MADV_FREE_REUSE** - Darwin only /// /// Marks a memory region previously freed by **MADV_FREE_REUSABLE** as non-reusable, accounts /// for the pages in the RSS of the process. Pages that have been freed will be replaced by /// zero-filled pages on demand, other pages will be left as is. #[cfg(any(target_os = "macos", target_os = "ios"))] FreeReuse = libc::MADV_FREE_REUSE, } // Future expansion: // MADV_SOFT_OFFLINE (since Linux 2.6.33) // MADV_WIPEONFORK (since Linux 4.14) // MADV_KEEPONFORK (since Linux 4.14) // MADV_COLD (since Linux 5.4) // MADV_PAGEOUT (since Linux 5.4)