Adding upstream version 110.0.1.upstream/110.0.1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 150 insertions, 0 deletions

diff --git a/security/sandbox/chromium/base/atomicops.h b/security/sandbox/chromium/base/atomicops.h
new file mode 100644
index 0000000000..429e2457fc
--- /dev/null
+++ b/security/sandbox/chromium/base/atomicops.h
@@ -0,0 +1,150 @@
+// Copyright (c) 2012 The Chromium Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+
+// For atomic operations on reference counts, see atomic_refcount.h.
+// For atomic operations on sequence numbers, see atomic_sequence_num.h.
+
+// The routines exported by this module are subtle.  If you use them, even if
+// you get the code right, it will depend on careful reasoning about atomicity
+// and memory ordering; it will be less readable, and harder to maintain.  If
+// you plan to use these routines, you should have a good reason, such as solid
+// evidence that performance would otherwise suffer, or there being no
+// alternative.  You should assume only properties explicitly guaranteed by the
+// specifications in this file.  You are almost certainly _not_ writing code
+// just for the x86; if you assume x86 semantics, x86 hardware bugs and
+// implementations on other archtectures will cause your code to break.  If you
+// do not know what you are doing, avoid these routines, and use a Mutex.
+//
+// It is incorrect to make direct assignments to/from an atomic variable.
+// You should use one of the Load or Store routines.  The NoBarrier
+// versions are provided when no barriers are needed:
+//   NoBarrier_Store()
+//   NoBarrier_Load()
+// Although there are currently no compiler enforcement, you are encouraged
+// to use these.
+//
+
+#ifndef BASE_ATOMICOPS_H_
+#define BASE_ATOMICOPS_H_
+
+#include <stdint.h>
+
+// Small C++ header which defines implementation specific macros used to
+// identify the STL implementation.
+// - libc++: captures __config for _LIBCPP_VERSION
+// - libstdc++: captures bits/c++config.h for __GLIBCXX__
+#include <cstddef>
+
+#include "base/base_export.h"
+#include "build/build_config.h"
+
+namespace base {
+namespace subtle {
+
+typedef int32_t Atomic32;
+#ifdef ARCH_CPU_64_BITS
+// We need to be able to go between Atomic64 and AtomicWord implicitly.  This
+// means Atomic64 and AtomicWord should be the same type on 64-bit.
+#if defined(__ILP32__) || defined(OS_NACL)
+// NaCl's intptr_t is not actually 64-bits on 64-bit!
+// http://code.google.com/p/nativeclient/issues/detail?id=1162
+typedef int64_t Atomic64;
+#else
+typedef intptr_t Atomic64;
+#endif
+#endif
+
+// Use AtomicWord for a machine-sized pointer.  It will use the Atomic32 or
+// Atomic64 routines below, depending on your architecture.
+typedef intptr_t AtomicWord;
+
+// Atomically execute:
+//      result = *ptr;
+//      if (*ptr == old_value)
+//        *ptr = new_value;
+//      return result;
+//
+// I.e., replace "*ptr" with "new_value" if "*ptr" used to be "old_value".
+// Always return the old value of "*ptr"
+//
+// This routine implies no memory barriers.
+Atomic32 NoBarrier_CompareAndSwap(volatile Atomic32* ptr,
+                                  Atomic32 old_value,
+                                  Atomic32 new_value);
+
+// Atomically store new_value into *ptr, returning the previous value held in
+// *ptr.  This routine implies no memory barriers.
+Atomic32 NoBarrier_AtomicExchange(volatile Atomic32* ptr, Atomic32 new_value);
+
+// Atomically increment *ptr by "increment".  Returns the new value of
+// *ptr with the increment applied.  This routine implies no memory barriers.
+Atomic32 NoBarrier_AtomicIncrement(volatile Atomic32* ptr, Atomic32 increment);
+
+Atomic32 Barrier_AtomicIncrement(volatile Atomic32* ptr,
+                                 Atomic32 increment);
+
+// These following lower-level operations are typically useful only to people
+// implementing higher-level synchronization operations like spinlocks,
+// mutexes, and condition-variables.  They combine CompareAndSwap(), a load, or
+// a store with appropriate memory-ordering instructions.  "Acquire" operations
+// ensure that no later memory access can be reordered ahead of the operation.
+// "Release" operations ensure that no previous memory access can be reordered
+// after the operation.  "Barrier" operations have both "Acquire" and "Release"
+// semantics.
+Atomic32 Acquire_CompareAndSwap(volatile Atomic32* ptr,
+                                Atomic32 old_value,
+                                Atomic32 new_value);
+Atomic32 Release_CompareAndSwap(volatile Atomic32* ptr,
+                                Atomic32 old_value,
+                                Atomic32 new_value);
+
+void NoBarrier_Store(volatile Atomic32* ptr, Atomic32 value);
+void Acquire_Store(volatile Atomic32* ptr, Atomic32 value);
+void Release_Store(volatile Atomic32* ptr, Atomic32 value);
+
+Atomic32 NoBarrier_Load(volatile const Atomic32* ptr);
+Atomic32 Acquire_Load(volatile const Atomic32* ptr);
+Atomic32 Release_Load(volatile const Atomic32* ptr);
+
+// 64-bit atomic operations (only available on 64-bit processors).
+#ifdef ARCH_CPU_64_BITS
+Atomic64 NoBarrier_CompareAndSwap(volatile Atomic64* ptr,
+                                  Atomic64 old_value,
+                                  Atomic64 new_value);
+Atomic64 NoBarrier_AtomicExchange(volatile Atomic64* ptr, Atomic64 new_value);
+Atomic64 NoBarrier_AtomicIncrement(volatile Atomic64* ptr, Atomic64 increment);
+Atomic64 Barrier_AtomicIncrement(volatile Atomic64* ptr, Atomic64 increment);
+
+Atomic64 Acquire_CompareAndSwap(volatile Atomic64* ptr,
+                                Atomic64 old_value,
+                                Atomic64 new_value);
+Atomic64 Release_CompareAndSwap(volatile Atomic64* ptr,
+                                Atomic64 old_value,
+                                Atomic64 new_value);
+void NoBarrier_Store(volatile Atomic64* ptr, Atomic64 value);
+void Acquire_Store(volatile Atomic64* ptr, Atomic64 value);
+void Release_Store(volatile Atomic64* ptr, Atomic64 value);
+Atomic64 NoBarrier_Load(volatile const Atomic64* ptr);
+Atomic64 Acquire_Load(volatile const Atomic64* ptr);
+Atomic64 Release_Load(volatile const Atomic64* ptr);
+#endif  // ARCH_CPU_64_BITS
+
+}  // namespace subtle
+}  // namespace base
+
+#if defined(OS_WIN) && defined(ARCH_CPU_X86_FAMILY)
+// TODO(jfb): Try to use base/atomicops_internals_portable.h everywhere.
+// https://crbug.com/559247.
+#  include "base/atomicops_internals_x86_msvc.h"
+#else
+#  include "base/atomicops_internals_portable.h"
+#endif
+
+// On some platforms we need additional declarations to make
+// AtomicWord compatible with our other Atomic* types.
+#if defined(OS_MACOSX) || defined(OS_OPENBSD)
+#include "base/atomicops_internals_atomicword_compat.h"
+#endif
+
+#endif  // BASE_ATOMICOPS_H_