diff options
Diffstat (limited to '')
| -rw-r--r-- | media/libvorbis/include/vorbis/codec.h | 242 | ||||
| -rw-r--r-- | media/libvorbis/include/vorbis/vorbisenc.h | 435 |
2 files changed, 677 insertions, 0 deletions
diff --git a/media/libvorbis/include/vorbis/codec.h b/media/libvorbis/include/vorbis/codec.h new file mode 100644 index 0000000000..f8a912bc26 --- /dev/null +++ b/media/libvorbis/include/vorbis/codec.h @@ -0,0 +1,242 @@ +/******************************************************************** + * * + * THIS FILE IS PART OF THE OggVorbis SOFTWARE CODEC SOURCE CODE. * + * USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS * + * GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE * + * IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING. * + * * + * THE OggVorbis SOURCE CODE IS (C) COPYRIGHT 1994-2001 * + * by the Xiph.Org Foundation https://xiph.org/ * + + ******************************************************************** + + function: libvorbis codec headers + + ********************************************************************/ + +#ifndef _vorbis_codec_h_ +#define _vorbis_codec_h_ + +#ifdef __cplusplus +extern "C" +{ +#endif /* __cplusplus */ + +#include <ogg/ogg.h> + +typedef struct vorbis_info{ + int version; + int channels; + long rate; + + /* The below bitrate declarations are *hints*. + Combinations of the three values carry the following implications: + + all three set to the same value: + implies a fixed rate bitstream + only nominal set: + implies a VBR stream that averages the nominal bitrate. No hard + upper/lower limit + upper and or lower set: + implies a VBR bitstream that obeys the bitrate limits. nominal + may also be set to give a nominal rate. + none set: + the coder does not care to speculate. + */ + + long bitrate_upper; + long bitrate_nominal; + long bitrate_lower; + long bitrate_window; + + void *codec_setup; +} vorbis_info; + +/* vorbis_dsp_state buffers the current vorbis audio + analysis/synthesis state. The DSP state belongs to a specific + logical bitstream ****************************************************/ +typedef struct vorbis_dsp_state{ + int analysisp; + vorbis_info *vi; + + float **pcm; + float **pcmret; + int pcm_storage; + int pcm_current; + int pcm_returned; + + int preextrapolate; + int eofflag; + + long lW; + long W; + long nW; + long centerW; + + ogg_int64_t granulepos; + ogg_int64_t sequence; + + ogg_int64_t glue_bits; + ogg_int64_t time_bits; + ogg_int64_t floor_bits; + ogg_int64_t res_bits; + + void *backend_state; +} vorbis_dsp_state; + +typedef struct vorbis_block{ + /* necessary stream state for linking to the framing abstraction */ + float **pcm; /* this is a pointer into local storage */ + oggpack_buffer opb; + + long lW; + long W; + long nW; + int pcmend; + int mode; + + int eofflag; + ogg_int64_t granulepos; + ogg_int64_t sequence; + vorbis_dsp_state *vd; /* For read-only access of configuration */ + + /* local storage to avoid remallocing; it's up to the mapping to + structure it */ + void *localstore; + long localtop; + long localalloc; + long totaluse; + struct alloc_chain *reap; + + /* bitmetrics for the frame */ + long glue_bits; + long time_bits; + long floor_bits; + long res_bits; + + void *internal; + +} vorbis_block; + +/* vorbis_block is a single block of data to be processed as part of +the analysis/synthesis stream; it belongs to a specific logical +bitstream, but is independent from other vorbis_blocks belonging to +that logical bitstream. *************************************************/ + +struct alloc_chain{ + void *ptr; + struct alloc_chain *next; +}; + +/* vorbis_info contains all the setup information specific to the + specific compression/decompression mode in progress (eg, + psychoacoustic settings, channel setup, options, codebook + etc). vorbis_info and substructures are in backends.h. +*********************************************************************/ + +/* the comments are not part of vorbis_info so that vorbis_info can be + static storage */ +typedef struct vorbis_comment{ + /* unlimited user comment fields. libvorbis writes 'libvorbis' + whatever vendor is set to in encode */ + char **user_comments; + int *comment_lengths; + int comments; + char *vendor; + +} vorbis_comment; + + +/* libvorbis encodes in two abstraction layers; first we perform DSP + and produce a packet (see docs/analysis.txt). The packet is then + coded into a framed OggSquish bitstream by the second layer (see + docs/framing.txt). Decode is the reverse process; we sync/frame + the bitstream and extract individual packets, then decode the + packet back into PCM audio. + + The extra framing/packetizing is used in streaming formats, such as + files. Over the net (such as with UDP), the framing and + packetization aren't necessary as they're provided by the transport + and the streaming layer is not used */ + +/* Vorbis PRIMITIVES: general ***************************************/ + +extern void vorbis_info_init(vorbis_info *vi); +extern void vorbis_info_clear(vorbis_info *vi); +extern int vorbis_info_blocksize(vorbis_info *vi,int zo); +extern void vorbis_comment_init(vorbis_comment *vc); +extern void vorbis_comment_add(vorbis_comment *vc, const char *comment); +extern void vorbis_comment_add_tag(vorbis_comment *vc, + const char *tag, const char *contents); +extern char *vorbis_comment_query(vorbis_comment *vc, const char *tag, int count); +extern int vorbis_comment_query_count(vorbis_comment *vc, const char *tag); +extern void vorbis_comment_clear(vorbis_comment *vc); + +extern int vorbis_block_init(vorbis_dsp_state *v, vorbis_block *vb); +extern int vorbis_block_clear(vorbis_block *vb); +extern void vorbis_dsp_clear(vorbis_dsp_state *v); +extern double vorbis_granule_time(vorbis_dsp_state *v, + ogg_int64_t granulepos); + +extern const char *vorbis_version_string(void); + +/* Vorbis PRIMITIVES: analysis/DSP layer ****************************/ + +extern int vorbis_analysis_init(vorbis_dsp_state *v,vorbis_info *vi); +extern int vorbis_commentheader_out(vorbis_comment *vc, ogg_packet *op); +extern int vorbis_analysis_headerout(vorbis_dsp_state *v, + vorbis_comment *vc, + ogg_packet *op, + ogg_packet *op_comm, + ogg_packet *op_code); +extern float **vorbis_analysis_buffer(vorbis_dsp_state *v,int vals); +extern int vorbis_analysis_wrote(vorbis_dsp_state *v,int vals); +extern int vorbis_analysis_blockout(vorbis_dsp_state *v,vorbis_block *vb); +extern int vorbis_analysis(vorbis_block *vb,ogg_packet *op); + +extern int vorbis_bitrate_addblock(vorbis_block *vb); +extern int vorbis_bitrate_flushpacket(vorbis_dsp_state *vd, + ogg_packet *op); + +/* Vorbis PRIMITIVES: synthesis layer *******************************/ +extern int vorbis_synthesis_idheader(ogg_packet *op); +extern int vorbis_synthesis_headerin(vorbis_info *vi,vorbis_comment *vc, + ogg_packet *op); + +extern int vorbis_synthesis_init(vorbis_dsp_state *v,vorbis_info *vi); +extern int vorbis_synthesis_restart(vorbis_dsp_state *v); +extern int vorbis_synthesis(vorbis_block *vb,ogg_packet *op); +extern int vorbis_synthesis_trackonly(vorbis_block *vb,ogg_packet *op); +extern int vorbis_synthesis_blockin(vorbis_dsp_state *v,vorbis_block *vb); +extern int vorbis_synthesis_pcmout(vorbis_dsp_state *v,float ***pcm); +extern int vorbis_synthesis_lapout(vorbis_dsp_state *v,float ***pcm); +extern int vorbis_synthesis_read(vorbis_dsp_state *v,int samples); +extern long vorbis_packet_blocksize(vorbis_info *vi,ogg_packet *op); + +extern int vorbis_synthesis_halfrate(vorbis_info *v,int flag); +extern int vorbis_synthesis_halfrate_p(vorbis_info *v); + +/* Vorbis ERRORS and return codes ***********************************/ + +#define OV_FALSE -1 +#define OV_EOF -2 +#define OV_HOLE -3 + +#define OV_EREAD -128 +#define OV_EFAULT -129 +#define OV_EIMPL -130 +#define OV_EINVAL -131 +#define OV_ENOTVORBIS -132 +#define OV_EBADHEADER -133 +#define OV_EVERSION -134 +#define OV_ENOTAUDIO -135 +#define OV_EBADPACKET -136 +#define OV_EBADLINK -137 +#define OV_ENOSEEK -138 + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif + diff --git a/media/libvorbis/include/vorbis/vorbisenc.h b/media/libvorbis/include/vorbis/vorbisenc.h new file mode 100644 index 0000000000..085b15e669 --- /dev/null +++ b/media/libvorbis/include/vorbis/vorbisenc.h @@ -0,0 +1,435 @@ +/******************************************************************** + * * + * THIS FILE IS PART OF THE OggVorbis SOFTWARE CODEC SOURCE CODE. * + * USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS * + * GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE * + * IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING. * + * * + * THE OggVorbis SOURCE CODE IS (C) COPYRIGHT 1994-2001 * + * by the Xiph.Org Foundation https://xiph.org/ * + * * + ******************************************************************** + + function: vorbis encode-engine setup + + ********************************************************************/ + +/** \file + * Libvorbisenc is a convenient API for setting up an encoding + * environment using libvorbis. Libvorbisenc encapsulates the + * actions needed to set up the encoder properly. + */ + +#ifndef _OV_ENC_H_ +#define _OV_ENC_H_ + +#ifdef __cplusplus +extern "C" +{ +#endif /* __cplusplus */ + +#include "codec.h" + +/** + * This is the primary function within libvorbisenc for setting up managed + * bitrate modes. + * + * Before this function is called, the \ref vorbis_info + * struct should be initialized by using vorbis_info_init() from the libvorbis + * API. After encoding, vorbis_info_clear() should be called. + * + * The max_bitrate, nominal_bitrate, and min_bitrate settings are used to set + * constraints for the encoded file. This function uses these settings to + * select the appropriate encoding mode and set it up. + * + * \param vi Pointer to an initialized \ref vorbis_info struct. + * \param channels The number of channels to be encoded. + * \param rate The sampling rate of the source audio. + * \param max_bitrate Desired maximum bitrate (limit). -1 indicates unset. + * \param nominal_bitrate Desired average, or central, bitrate. -1 indicates unset. + * \param min_bitrate Desired minimum bitrate. -1 indicates unset. + * + * \return Zero for success, and negative values for failure. + * + * \retval 0 Success. + * \retval OV_EFAULT Internal logic fault; indicates a bug or heap/stack corruption. + * \retval OV_EINVAL Invalid setup request, eg, out of range argument. + * \retval OV_EIMPL Unimplemented mode; unable to comply with bitrate request. + */ +extern int vorbis_encode_init(vorbis_info *vi, + long channels, + long rate, + + long max_bitrate, + long nominal_bitrate, + long min_bitrate); + +/** + * This function performs step-one of a three-step bitrate-managed encode + * setup. It functions similarly to the one-step setup performed by \ref + * vorbis_encode_init but allows an application to make further encode setup + * tweaks using \ref vorbis_encode_ctl before finally calling \ref + * vorbis_encode_setup_init to complete the setup process. + * + * Before this function is called, the \ref vorbis_info struct should be + * initialized by using vorbis_info_init() from the libvorbis API. After + * encoding, vorbis_info_clear() should be called. + * + * The max_bitrate, nominal_bitrate, and min_bitrate settings are used to set + * constraints for the encoded file. This function uses these settings to + * select the appropriate encoding mode and set it up. + * + * \param vi Pointer to an initialized vorbis_info struct. + * \param channels The number of channels to be encoded. + * \param rate The sampling rate of the source audio. + * \param max_bitrate Desired maximum bitrate (limit). -1 indicates unset. + * \param nominal_bitrate Desired average, or central, bitrate. -1 indicates unset. + * \param min_bitrate Desired minimum bitrate. -1 indicates unset. + * + * \return Zero for success, and negative for failure. + * + * \retval 0 Success + * \retval OV_EFAULT Internal logic fault; indicates a bug or heap/stack corruption. + * \retval OV_EINVAL Invalid setup request, eg, out of range argument. + * \retval OV_EIMPL Unimplemented mode; unable to comply with bitrate request. + */ +extern int vorbis_encode_setup_managed(vorbis_info *vi, + long channels, + long rate, + + long max_bitrate, + long nominal_bitrate, + long min_bitrate); + +/** + * This function performs step-one of a three-step variable bitrate + * (quality-based) encode setup. It functions similarly to the one-step setup + * performed by \ref vorbis_encode_init_vbr() but allows an application to + * make further encode setup tweaks using \ref vorbis_encode_ctl() before + * finally calling \ref vorbis_encode_setup_init to complete the setup + * process. + * + * Before this function is called, the \ref vorbis_info struct should be + * initialized by using \ref vorbis_info_init() from the libvorbis API. After + * encoding, vorbis_info_clear() should be called. + * + * \param vi Pointer to an initialized vorbis_info struct. + * \param channels The number of channels to be encoded. + * \param rate The sampling rate of the source audio. + * \param quality Desired quality level, currently from -0.1 to 1.0 (lo to hi). + * + * \return Zero for success, and negative values for failure. + * + * \retval 0 Success + * \retval OV_EFAULT Internal logic fault; indicates a bug or heap/stack corruption. + * \retval OV_EINVAL Invalid setup request, eg, out of range argument. + * \retval OV_EIMPL Unimplemented mode; unable to comply with quality level request. + */ +extern int vorbis_encode_setup_vbr(vorbis_info *vi, + long channels, + long rate, + + float quality + ); + +/** + * This is the primary function within libvorbisenc for setting up variable + * bitrate ("quality" based) modes. + * + * + * Before this function is called, the vorbis_info struct should be + * initialized by using vorbis_info_init() from the libvorbis API. After + * encoding, vorbis_info_clear() should be called. + * + * \param vi Pointer to an initialized vorbis_info struct. + * \param channels The number of channels to be encoded. + * \param rate The sampling rate of the source audio. + * \param base_quality Desired quality level, currently from -0.1 to 1.0 (lo to hi). + * + * + * \return Zero for success, or a negative number for failure. + * + * \retval 0 Success + * \retval OV_EFAULT Internal logic fault; indicates a bug or heap/stack corruption. + * \retval OV_EINVAL Invalid setup request, eg, out of range argument. + * \retval OV_EIMPL Unimplemented mode; unable to comply with quality level request. + */ +extern int vorbis_encode_init_vbr(vorbis_info *vi, + long channels, + long rate, + + float base_quality + ); + +/** + * This function performs the last stage of three-step encoding setup, as + * described in the API overview under managed bitrate modes. + * + * Before this function is called, the \ref vorbis_info struct should be + * initialized by using vorbis_info_init() from the libvorbis API, one of + * \ref vorbis_encode_setup_managed() or \ref vorbis_encode_setup_vbr() called to + * initialize the high-level encoding setup, and \ref vorbis_encode_ctl() + * called if necessary to make encoding setup changes. + * vorbis_encode_setup_init() finalizes the highlevel encoding structure into + * a complete encoding setup after which the application may make no further + * setup changes. + * + * After encoding, vorbis_info_clear() should be called. + * + * \param vi Pointer to an initialized \ref vorbis_info struct. + * + * \return Zero for success, and negative values for failure. + * + * \retval 0 Success. + * \retval OV_EFAULT Internal logic fault; indicates a bug or heap/stack corruption. + * + * \retval OV_EINVAL Attempt to use vorbis_encode_setup_init() without first + * calling one of vorbis_encode_setup_managed() or vorbis_encode_setup_vbr() to + * initialize the high-level encoding setup + * + */ +extern int vorbis_encode_setup_init(vorbis_info *vi); + +/** + * This function implements a generic interface to miscellaneous encoder + * settings similar to the classic UNIX 'ioctl()' system call. Applications + * may use vorbis_encode_ctl() to query or set bitrate management or quality + * mode details by using one of several \e request arguments detailed below. + * vorbis_encode_ctl() must be called after one of + * vorbis_encode_setup_managed() or vorbis_encode_setup_vbr(). When used + * to modify settings, \ref vorbis_encode_ctl() must be called before \ref + * vorbis_encode_setup_init(). + * + * \param vi Pointer to an initialized vorbis_info struct. + * + * \param number Specifies the desired action; See \ref encctlcodes "the list + * of available requests". + * + * \param arg void * pointing to a data structure matching the request + * argument. + * + * \retval 0 Success. Any further return information (such as the result of a + * query) is placed into the storage pointed to by *arg. + * + * \retval OV_EINVAL Invalid argument, or an attempt to modify a setting after + * calling vorbis_encode_setup_init(). + * + * \retval OV_EIMPL Unimplemented or unknown request + */ +extern int vorbis_encode_ctl(vorbis_info *vi,int number,void *arg); + +/** + * \deprecated This is a deprecated interface. Please use vorbis_encode_ctl() + * with the \ref ovectl_ratemanage2_arg struct and \ref + * OV_ECTL_RATEMANAGE2_GET and \ref OV_ECTL_RATEMANAGE2_SET calls in new code. + * + * The \ref ovectl_ratemanage_arg structure is used with vorbis_encode_ctl() + * and the \ref OV_ECTL_RATEMANAGE_GET, \ref OV_ECTL_RATEMANAGE_SET, \ref + * OV_ECTL_RATEMANAGE_AVG, \ref OV_ECTL_RATEMANAGE_HARD calls in order to + * query and modify specifics of the encoder's bitrate management + * configuration. +*/ +struct ovectl_ratemanage_arg { + int management_active; /**< nonzero if bitrate management is active*/ +/** hard lower limit (in kilobits per second) below which the stream bitrate + will never be allowed for any given bitrate_hard_window seconds of time.*/ + long bitrate_hard_min; +/** hard upper limit (in kilobits per second) above which the stream bitrate + will never be allowed for any given bitrate_hard_window seconds of time.*/ + long bitrate_hard_max; +/** the window period (in seconds) used to regulate the hard bitrate minimum + and maximum*/ + double bitrate_hard_window; +/** soft lower limit (in kilobits per second) below which the average bitrate + tracker will start nudging the bitrate higher.*/ + long bitrate_av_lo; +/** soft upper limit (in kilobits per second) above which the average bitrate + tracker will start nudging the bitrate lower.*/ + long bitrate_av_hi; +/** the window period (in seconds) used to regulate the average bitrate + minimum and maximum.*/ + double bitrate_av_window; +/** Regulates the relative centering of the average and hard windows; in + libvorbis 1.0 and 1.0.1, the hard window regulation overlapped but + followed the average window regulation. In libvorbis 1.1 a bit-reservoir + interface replaces the old windowing interface; the older windowing + interface is simulated and this field has no effect.*/ + double bitrate_av_window_center; +}; + +/** + * \name struct ovectl_ratemanage2_arg + * + * The ovectl_ratemanage2_arg structure is used with vorbis_encode_ctl() and + * the OV_ECTL_RATEMANAGE2_GET and OV_ECTL_RATEMANAGE2_SET calls in order to + * query and modify specifics of the encoder's bitrate management + * configuration. + * +*/ +struct ovectl_ratemanage2_arg { + int management_active; /**< nonzero if bitrate management is active */ +/** Lower allowed bitrate limit in kilobits per second */ + long bitrate_limit_min_kbps; +/** Upper allowed bitrate limit in kilobits per second */ + long bitrate_limit_max_kbps; + long bitrate_limit_reservoir_bits; /**<Size of the bitrate reservoir in bits */ +/** Regulates the bitrate reservoir's preferred fill level in a range from 0.0 + * to 1.0; 0.0 tries to bank bits to buffer against future bitrate spikes, 1.0 + * buffers against future sudden drops in instantaneous bitrate. Default is + * 0.1 + */ + double bitrate_limit_reservoir_bias; +/** Average bitrate setting in kilobits per second */ + long bitrate_average_kbps; +/** Slew rate limit setting for average bitrate adjustment; sets the minimum + * time in seconds the bitrate tracker may swing from one extreme to the + * other when boosting or damping average bitrate. + */ + double bitrate_average_damping; +}; + + +/** + * \name vorbis_encode_ctl() codes + * + * \anchor encctlcodes + * + * These values are passed as the \c number parameter of vorbis_encode_ctl(). + * The type of the referent of that function's \c arg pointer depends on these + * codes. + */ +/*@{*/ + +/** + * Query the current encoder bitrate management setting. + * + *Argument: <tt>struct ovectl_ratemanage2_arg *</tt> + * + * Used to query the current encoder bitrate management setting. Also used to + * initialize fields of an ovectl_ratemanage2_arg structure for use with + * \ref OV_ECTL_RATEMANAGE2_SET. + */ +#define OV_ECTL_RATEMANAGE2_GET 0x14 + +/** + * Set the current encoder bitrate management settings. + * + * Argument: <tt>struct ovectl_ratemanage2_arg *</tt> + * + * Used to set the current encoder bitrate management settings to the values + * listed in the ovectl_ratemanage2_arg. Passing a NULL pointer will disable + * bitrate management. +*/ +#define OV_ECTL_RATEMANAGE2_SET 0x15 + +/** + * Returns the current encoder hard-lowpass setting (kHz) in the double + * pointed to by arg. + * + * Argument: <tt>double *</tt> +*/ +#define OV_ECTL_LOWPASS_GET 0x20 + +/** + * Sets the encoder hard-lowpass to the value (kHz) pointed to by arg. Valid + * lowpass settings range from 2 to 99. + * + * Argument: <tt>double *</tt> +*/ +#define OV_ECTL_LOWPASS_SET 0x21 + +/** + * Returns the current encoder impulse block setting in the double pointed + * to by arg. + * + * Argument: <tt>double *</tt> +*/ +#define OV_ECTL_IBLOCK_GET 0x30 + +/** + * Sets the impulse block bias to the the value pointed to by arg. + * + * Argument: <tt>double *</tt> + * + * Valid range is -15.0 to 0.0 [default]. A negative impulse block bias will + * direct to encoder to use more bits when incoding short blocks that contain + * strong impulses, thus improving the accuracy of impulse encoding. + */ +#define OV_ECTL_IBLOCK_SET 0x31 + +/** + * Returns the current encoder coupling setting in the int pointed + * to by arg. + * + * Argument: <tt>int *</tt> +*/ +#define OV_ECTL_COUPLING_GET 0x40 + +/** + * Enables/disables channel coupling in multichannel encoding according to arg. + * + * Argument: <tt>int *</tt> + * + * Zero disables channel coupling for multichannel inputs, nonzer enables + * channel coupling. Setting has no effect on monophonic encoding or + * multichannel counts that do not offer coupling. At present, coupling is + * available for stereo and 5.1 encoding. + */ +#define OV_ECTL_COUPLING_SET 0x41 + + /* deprecated rate management supported only for compatibility */ + +/** + * Old interface to querying bitrate management settings. + * + * Deprecated after move to bit-reservoir style management in 1.1 rendered + * this interface partially obsolete. + + * \deprecated Please use \ref OV_ECTL_RATEMANAGE2_GET instead. + * + * Argument: <tt>struct ovectl_ratemanage_arg *</tt> + */ +#define OV_ECTL_RATEMANAGE_GET 0x10 +/** + * Old interface to modifying bitrate management settings. + * + * deprecated after move to bit-reservoir style management in 1.1 rendered + * this interface partially obsolete. + * + * \deprecated Please use \ref OV_ECTL_RATEMANAGE2_SET instead. + * + * Argument: <tt>struct ovectl_ratemanage_arg *</tt> + */ +#define OV_ECTL_RATEMANAGE_SET 0x11 +/** + * Old interface to setting average-bitrate encoding mode. + * + * Deprecated after move to bit-reservoir style management in 1.1 rendered + * this interface partially obsolete. + * + * \deprecated Please use \ref OV_ECTL_RATEMANAGE2_SET instead. + * + * Argument: <tt>struct ovectl_ratemanage_arg *</tt> + */ +#define OV_ECTL_RATEMANAGE_AVG 0x12 +/** + * Old interface to setting bounded-bitrate encoding modes. + * + * deprecated after move to bit-reservoir style management in 1.1 rendered + * this interface partially obsolete. + * + * \deprecated Please use \ref OV_ECTL_RATEMANAGE2_SET instead. + * + * Argument: <tt>struct ovectl_ratemanage_arg *</tt> + */ +#define OV_ECTL_RATEMANAGE_HARD 0x13 + +/*@}*/ + + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif |