diff options
Diffstat (limited to 'third_party/rust/futures-channel/src/oneshot.rs')
| -rw-r--r-- | third_party/rust/futures-channel/src/oneshot.rs | 488 |
1 files changed, 488 insertions, 0 deletions
diff --git a/third_party/rust/futures-channel/src/oneshot.rs b/third_party/rust/futures-channel/src/oneshot.rs new file mode 100644 index 0000000000..5af651b913 --- /dev/null +++ b/third_party/rust/futures-channel/src/oneshot.rs @@ -0,0 +1,488 @@ +//! A channel for sending a single message between asynchronous tasks. +//! +//! This is a single-producer, single-consumer channel. + +use alloc::sync::Arc; +use core::fmt; +use core::pin::Pin; +use core::sync::atomic::AtomicBool; +use core::sync::atomic::Ordering::SeqCst; +use futures_core::future::{FusedFuture, Future}; +use futures_core::task::{Context, Poll, Waker}; + +use crate::lock::Lock; + +/// A future for a value that will be provided by another asynchronous task. +/// +/// This is created by the [`channel`](channel) function. +#[must_use = "futures do nothing unless you `.await` or poll them"] +pub struct Receiver<T> { + inner: Arc<Inner<T>>, +} + +/// A means of transmitting a single value to another task. +/// +/// This is created by the [`channel`](channel) function. +pub struct Sender<T> { + inner: Arc<Inner<T>>, +} + +// The channels do not ever project Pin to the inner T +impl<T> Unpin for Receiver<T> {} +impl<T> Unpin for Sender<T> {} + +/// Internal state of the `Receiver`/`Sender` pair above. This is all used as +/// the internal synchronization between the two for send/recv operations. +struct Inner<T> { + /// Indicates whether this oneshot is complete yet. This is filled in both + /// by `Sender::drop` and by `Receiver::drop`, and both sides interpret it + /// appropriately. + /// + /// For `Receiver`, if this is `true`, then it's guaranteed that `data` is + /// unlocked and ready to be inspected. + /// + /// For `Sender` if this is `true` then the oneshot has gone away and it + /// can return ready from `poll_canceled`. + complete: AtomicBool, + + /// The actual data being transferred as part of this `Receiver`. This is + /// filled in by `Sender::complete` and read by `Receiver::poll`. + /// + /// Note that this is protected by `Lock`, but it is in theory safe to + /// replace with an `UnsafeCell` as it's actually protected by `complete` + /// above. I wouldn't recommend doing this, however, unless someone is + /// supremely confident in the various atomic orderings here and there. + data: Lock<Option<T>>, + + /// Field to store the task which is blocked in `Receiver::poll`. + /// + /// This is filled in when a oneshot is polled but not ready yet. Note that + /// the `Lock` here, unlike in `data` above, is important to resolve races. + /// Both the `Receiver` and the `Sender` halves understand that if they + /// can't acquire the lock then some important interference is happening. + rx_task: Lock<Option<Waker>>, + + /// Like `rx_task` above, except for the task blocked in + /// `Sender::poll_canceled`. Additionally, `Lock` cannot be `UnsafeCell`. + tx_task: Lock<Option<Waker>>, +} + +/// Creates a new one-shot channel for sending a single value across asynchronous tasks. +/// +/// The channel works for a spsc (single-producer, single-consumer) scheme. +/// +/// This function is similar to Rust's channel constructor found in the standard +/// library. Two halves are returned, the first of which is a `Sender` handle, +/// used to signal the end of a computation and provide its value. The second +/// half is a `Receiver` which implements the `Future` trait, resolving to the +/// value that was given to the `Sender` handle. +/// +/// Each half can be separately owned and sent across tasks. +/// +/// # Examples +/// +/// ``` +/// use futures::channel::oneshot; +/// use std::{thread, time::Duration}; +/// +/// let (sender, receiver) = oneshot::channel::<i32>(); +/// +/// thread::spawn(|| { +/// println!("THREAD: sleeping zzz..."); +/// thread::sleep(Duration::from_millis(1000)); +/// println!("THREAD: i'm awake! sending."); +/// sender.send(3).unwrap(); +/// }); +/// +/// println!("MAIN: doing some useful stuff"); +/// +/// futures::executor::block_on(async { +/// println!("MAIN: waiting for msg..."); +/// println!("MAIN: got: {:?}", receiver.await) +/// }); +/// ``` +pub fn channel<T>() -> (Sender<T>, Receiver<T>) { + let inner = Arc::new(Inner::new()); + let receiver = Receiver { inner: inner.clone() }; + let sender = Sender { inner }; + (sender, receiver) +} + +impl<T> Inner<T> { + fn new() -> Self { + Self { + complete: AtomicBool::new(false), + data: Lock::new(None), + rx_task: Lock::new(None), + tx_task: Lock::new(None), + } + } + + fn send(&self, t: T) -> Result<(), T> { + if self.complete.load(SeqCst) { + return Err(t); + } + + // Note that this lock acquisition may fail if the receiver + // is closed and sets the `complete` flag to `true`, whereupon + // the receiver may call `poll()`. + if let Some(mut slot) = self.data.try_lock() { + assert!(slot.is_none()); + *slot = Some(t); + drop(slot); + + // If the receiver called `close()` between the check at the + // start of the function, and the lock being released, then + // the receiver may not be around to receive it, so try to + // pull it back out. + if self.complete.load(SeqCst) { + // If lock acquisition fails, then receiver is actually + // receiving it, so we're good. + if let Some(mut slot) = self.data.try_lock() { + if let Some(t) = slot.take() { + return Err(t); + } + } + } + Ok(()) + } else { + // Must have been closed + Err(t) + } + } + + fn poll_canceled(&self, cx: &mut Context<'_>) -> Poll<()> { + // Fast path up first, just read the flag and see if our other half is + // gone. This flag is set both in our destructor and the oneshot + // destructor, but our destructor hasn't run yet so if it's set then the + // oneshot is gone. + if self.complete.load(SeqCst) { + return Poll::Ready(()); + } + + // If our other half is not gone then we need to park our current task + // and move it into the `tx_task` slot to get notified when it's + // actually gone. + // + // If `try_lock` fails, then the `Receiver` is in the process of using + // it, so we can deduce that it's now in the process of going away and + // hence we're canceled. If it succeeds then we just store our handle. + // + // Crucially we then check `complete` *again* before we return. + // While we were storing our handle inside `tx_task` the + // `Receiver` may have been dropped. The first thing it does is set the + // flag, and if it fails to acquire the lock it assumes that we'll see + // the flag later on. So... we then try to see the flag later on! + let handle = cx.waker().clone(); + match self.tx_task.try_lock() { + Some(mut p) => *p = Some(handle), + None => return Poll::Ready(()), + } + if self.complete.load(SeqCst) { + Poll::Ready(()) + } else { + Poll::Pending + } + } + + fn is_canceled(&self) -> bool { + self.complete.load(SeqCst) + } + + fn drop_tx(&self) { + // Flag that we're a completed `Sender` and try to wake up a receiver. + // Whether or not we actually stored any data will get picked up and + // translated to either an item or cancellation. + // + // Note that if we fail to acquire the `rx_task` lock then that means + // we're in one of two situations: + // + // 1. The receiver is trying to block in `poll` + // 2. The receiver is being dropped + // + // In the first case it'll check the `complete` flag after it's done + // blocking to see if it succeeded. In the latter case we don't need to + // wake up anyone anyway. So in both cases it's ok to ignore the `None` + // case of `try_lock` and bail out. + // + // The first case crucially depends on `Lock` using `SeqCst` ordering + // under the hood. If it instead used `Release` / `Acquire` ordering, + // then it would not necessarily synchronize with `inner.complete` + // and deadlock might be possible, as was observed in + // https://github.com/rust-lang/futures-rs/pull/219. + self.complete.store(true, SeqCst); + + if let Some(mut slot) = self.rx_task.try_lock() { + if let Some(task) = slot.take() { + drop(slot); + task.wake(); + } + } + + // If we registered a task for cancel notification drop it to reduce + // spurious wakeups + if let Some(mut slot) = self.tx_task.try_lock() { + drop(slot.take()); + } + } + + fn close_rx(&self) { + // Flag our completion and then attempt to wake up the sender if it's + // blocked. See comments in `drop` below for more info + self.complete.store(true, SeqCst); + if let Some(mut handle) = self.tx_task.try_lock() { + if let Some(task) = handle.take() { + drop(handle); + task.wake() + } + } + } + + fn try_recv(&self) -> Result<Option<T>, Canceled> { + // If we're complete, either `::close_rx` or `::drop_tx` was called. + // We can assume a successful send if data is present. + if self.complete.load(SeqCst) { + if let Some(mut slot) = self.data.try_lock() { + if let Some(data) = slot.take() { + return Ok(Some(data)); + } + } + Err(Canceled) + } else { + Ok(None) + } + } + + fn recv(&self, cx: &mut Context<'_>) -> Poll<Result<T, Canceled>> { + // Check to see if some data has arrived. If it hasn't then we need to + // block our task. + // + // Note that the acquisition of the `rx_task` lock might fail below, but + // the only situation where this can happen is during `Sender::drop` + // when we are indeed completed already. If that's happening then we + // know we're completed so keep going. + let done = if self.complete.load(SeqCst) { + true + } else { + let task = cx.waker().clone(); + match self.rx_task.try_lock() { + Some(mut slot) => { + *slot = Some(task); + false + } + None => true, + } + }; + + // If we're `done` via one of the paths above, then look at the data and + // figure out what the answer is. If, however, we stored `rx_task` + // successfully above we need to check again if we're completed in case + // a message was sent while `rx_task` was locked and couldn't notify us + // otherwise. + // + // If we're not done, and we're not complete, though, then we've + // successfully blocked our task and we return `Pending`. + if done || self.complete.load(SeqCst) { + // If taking the lock fails, the sender will realise that the we're + // `done` when it checks the `complete` flag on the way out, and + // will treat the send as a failure. + if let Some(mut slot) = self.data.try_lock() { + if let Some(data) = slot.take() { + return Poll::Ready(Ok(data)); + } + } + Poll::Ready(Err(Canceled)) + } else { + Poll::Pending + } + } + + fn drop_rx(&self) { + // Indicate to the `Sender` that we're done, so any future calls to + // `poll_canceled` are weeded out. + self.complete.store(true, SeqCst); + + // If we've blocked a task then there's no need for it to stick around, + // so we need to drop it. If this lock acquisition fails, though, then + // it's just because our `Sender` is trying to take the task, so we + // let them take care of that. + if let Some(mut slot) = self.rx_task.try_lock() { + let task = slot.take(); + drop(slot); + drop(task); + } + + // Finally, if our `Sender` wants to get notified of us going away, it + // would have stored something in `tx_task`. Here we try to peel that + // out and unpark it. + // + // Note that the `try_lock` here may fail, but only if the `Sender` is + // in the process of filling in the task. If that happens then we + // already flagged `complete` and they'll pick that up above. + if let Some(mut handle) = self.tx_task.try_lock() { + if let Some(task) = handle.take() { + drop(handle); + task.wake() + } + } + } +} + +impl<T> Sender<T> { + /// Completes this oneshot with a successful result. + /// + /// This function will consume `self` and indicate to the other end, the + /// [`Receiver`](Receiver), that the value provided is the result of the + /// computation this represents. + /// + /// If the value is successfully enqueued for the remote end to receive, + /// then `Ok(())` is returned. If the receiving end was dropped before + /// this function was called, however, then `Err(t)` is returned. + pub fn send(self, t: T) -> Result<(), T> { + self.inner.send(t) + } + + /// Polls this `Sender` half to detect whether its associated + /// [`Receiver`](Receiver) has been dropped. + /// + /// # Return values + /// + /// If `Ready(())` is returned then the associated `Receiver` has been + /// dropped, which means any work required for sending should be canceled. + /// + /// If `Pending` is returned then the associated `Receiver` is still + /// alive and may be able to receive a message if sent. The current task, + /// however, is scheduled to receive a notification if the corresponding + /// `Receiver` goes away. + pub fn poll_canceled(&mut self, cx: &mut Context<'_>) -> Poll<()> { + self.inner.poll_canceled(cx) + } + + /// Creates a future that resolves when this `Sender`'s corresponding + /// [`Receiver`](Receiver) half has hung up. + /// + /// This is a utility wrapping [`poll_canceled`](Sender::poll_canceled) + /// to expose a [`Future`](core::future::Future). + pub fn cancellation(&mut self) -> Cancellation<'_, T> { + Cancellation { inner: self } + } + + /// Tests to see whether this `Sender`'s corresponding `Receiver` + /// has been dropped. + /// + /// Unlike [`poll_canceled`](Sender::poll_canceled), this function does not + /// enqueue a task for wakeup upon cancellation, but merely reports the + /// current state, which may be subject to concurrent modification. + pub fn is_canceled(&self) -> bool { + self.inner.is_canceled() + } + + /// Tests to see whether this `Sender` is connected to the given `Receiver`. That is, whether + /// they were created by the same call to `channel`. + pub fn is_connected_to(&self, receiver: &Receiver<T>) -> bool { + Arc::ptr_eq(&self.inner, &receiver.inner) + } +} + +impl<T> Drop for Sender<T> { + fn drop(&mut self) { + self.inner.drop_tx() + } +} + +impl<T: fmt::Debug> fmt::Debug for Sender<T> { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + f.debug_struct("Sender").field("complete", &self.inner.complete).finish() + } +} + +/// A future that resolves when the receiving end of a channel has hung up. +/// +/// This is an `.await`-friendly interface around [`poll_canceled`](Sender::poll_canceled). +#[must_use = "futures do nothing unless you `.await` or poll them"] +#[derive(Debug)] +pub struct Cancellation<'a, T> { + inner: &'a mut Sender<T>, +} + +impl<T> Future for Cancellation<'_, T> { + type Output = (); + + fn poll(mut self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<()> { + self.inner.poll_canceled(cx) + } +} + +/// Error returned from a [`Receiver`](Receiver) when the corresponding +/// [`Sender`](Sender) is dropped. +#[derive(Clone, Copy, PartialEq, Eq, Debug)] +pub struct Canceled; + +impl fmt::Display for Canceled { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + write!(f, "oneshot canceled") + } +} + +#[cfg(feature = "std")] +impl std::error::Error for Canceled {} + +impl<T> Receiver<T> { + /// Gracefully close this receiver, preventing any subsequent attempts to + /// send to it. + /// + /// Any `send` operation which happens after this method returns is + /// guaranteed to fail. After calling this method, you can use + /// [`Receiver::poll`](core::future::Future::poll) to determine whether a + /// message had previously been sent. + pub fn close(&mut self) { + self.inner.close_rx() + } + + /// Attempts to receive a message outside of the context of a task. + /// + /// Does not schedule a task wakeup or have any other side effects. + /// + /// A return value of `None` must be considered immediately stale (out of + /// date) unless [`close`](Receiver::close) has been called first. + /// + /// Returns an error if the sender was dropped. + pub fn try_recv(&mut self) -> Result<Option<T>, Canceled> { + self.inner.try_recv() + } +} + +impl<T> Future for Receiver<T> { + type Output = Result<T, Canceled>; + + fn poll(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<T, Canceled>> { + self.inner.recv(cx) + } +} + +impl<T> FusedFuture for Receiver<T> { + fn is_terminated(&self) -> bool { + if self.inner.complete.load(SeqCst) { + if let Some(slot) = self.inner.data.try_lock() { + if slot.is_some() { + return false; + } + } + true + } else { + false + } + } +} + +impl<T> Drop for Receiver<T> { + fn drop(&mut self) { + self.inner.drop_rx() + } +} + +impl<T: fmt::Debug> fmt::Debug for Receiver<T> { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + f.debug_struct("Receiver").field("complete", &self.inner.complete).finish() + } +} |