From 43a97878ce14b72f0981164f87f2e35e14151312 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 11:22:09 +0200 Subject: Adding upstream version 110.0.1. Signed-off-by: Daniel Baumann --- .../tests/svg/import/animate-elem-60-t-manual.svg | 254 +++++++++++++++++++++ 1 file changed, 254 insertions(+) create mode 100644 testing/web-platform/tests/svg/import/animate-elem-60-t-manual.svg (limited to 'testing/web-platform/tests/svg/import/animate-elem-60-t-manual.svg') diff --git a/testing/web-platform/tests/svg/import/animate-elem-60-t-manual.svg b/testing/web-platform/tests/svg/import/animate-elem-60-t-manual.svg new file mode 100644 index 0000000000..2b38374874 --- /dev/null +++ b/testing/web-platform/tests/svg/import/animate-elem-60-t-manual.svg @@ -0,0 +1,254 @@ + + + + + + + + + + + + +

+ This test performs basic test on the begin attribute, + assuming support for the <set> element and setting the + fill attribute on a <rect> element. +

+

+ The test validates the various possibilities for the begin attribute + value: no specified value, offset value, event base value, sync base + value, indefinite value, repeat value, accessKey value and wallclock. +

+

+ There is one or several <set> elements for each of the possible begin + values. For each test, the <set> element(s) has (or have) an indefinite + duration and no other timing attribute specified other than begin + and dur. +

+

+ There are two sets of vertical markers which help check that the test + is handled properly by the user agent. The first set, on the left, shows + markers from 0s to 8s, where the times are offset from the document's load time. + The rectangles in that area should turn green at the time corresponding + to the column they are in. From example, the first rectangle (going left to right) + on the "sync base" line should turn green 2 seconds after the document's load. + The second set of time vertical markers shows offset from a particular event. + For example, for the event base, the markers show an offset to the time + the first event base rectangle (the left-most one) is clicked on. For the + accessKey line, the times show offsets from the time the 'a' key is pressed + and the document has focus. +

+

+ The first <set> has an unspecified begin attribute. That value + defaults to an offset of 0s so the animation should apply as soon as + the document is loaded. +

+

+ The second <set> has its begin attribute set to '2s'. So its + target rectangle should turn green two seconds after the document is + loaded. +

+

+ The third <set> has its begin attribute set to an event base + value 'click'. The user has to click on the left-most target red rectangle + to make the <set> target turn green. There are two rectangles + with associated <set> elements. The left most ones has a simple + value (no offset) and the second one is offset from the event time by 2 seconds. +

+

+ The fourth <set> elements have their begin attributes set to a sync base + value. The first two rectangles have <set> elements synchronized on their sync base + begin. The left-most one has no offset and the following one has a 2 seconds offset. + The last two rectangles have <set> elements synchronized on their sync base end. + The first one (i.e., the third from left to right on that line), has a 2 seconds + negative offset. The second one (i.e., the last one on the line) has no offset and should + begin at the time its sync base ends. +

+

+ The fifth <set> has its begin attribute set to indefinite and + should not turn red and stay green. +

+

+ The sixth <set>s have their begin attributes have their begin attributes + based on the repeat() function. The repeat they are synchronized on happens + at 3s. The first <set>, which has no offset, should begin at 3s. The + second <set>, which has a 2 seconds offset, should start at 5s. +

+

+ The seventh <set>s have their begin attributes set to 'accessKey(a)'. + The first one has no offset and should become active (and turn the rectangle + green), as soon as the key 'a' is pressed in the user agent. The second <set> + has a 2s offset and should become active 2 seconds after the 'a' key is pressed in + the user agent. +

+

+ The eight's <set> target has its begin attribute set to + 'wallclock()'. Therefore, the target should turn red because the + target wallclock time is in the past. The SMIL specification states the following about wallclock values in the past: + "When a begin time is resolved to be in the past (i.e., before the current presentation time), the element begins immediately, + but acts as though it had begun at the specified time (playing from an offset into the media)." (http://www.w3.org/TR/2001/REC-smil-animation-20010904/#AnimFuncTiming). +

+ + +

Run the test. Observe the document for at least eight seconds. + Then, click on the first red square in the "event base" row, + and observe the document for two seconds. Then, press "a" + on the keyboard, and observe the document for another two seconds.

+ + +

The test passes if the following conditions are met:

+
    +
  • In the first eight seconds of the document, the 10 squares + in the left section of the test must become green at the time + at the top of the column they are in. For example, the square in + the "offset" row must become green at 2s after the document has + been loaded.
    • +
  • Immediately once the red square in the "event base" row has been clicked, + it must become green. Two seconds after the click, the second square + must become green.
    • +
  • Immediately once "a" has been pressed on the keyboard, + the first square in the "accessKey()" row must become green. + Two seconds after the keypress, the second square must become green.
    • +
  • No other changes occur in the document.
    • +
+ + + $RCSfile: animate-elem-60-t.svg,v $ + + + + + + + + + begin + + + unspecified + offset + event base + sync base + indefinite + repeat() + accessKey() + wallclock() + + + + 0s + 1s + 2s + 3s + 4s + 5s + 6s + 7s + 8s + 0s + 1s + 2s + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + $Revision: 1.7 $ + + + + + -- cgit v1.2.3