/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*-
 * vim: set ts=8 sts=2 et sw=2 tw=80:
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#ifndef jit_JSJitFrameIter_h
#define jit_JSJitFrameIter_h

#include "mozilla/Maybe.h"

#include "jstypes.h"

#include "jit/JitCode.h"
#include "jit/MachineState.h"
#include "jit/Snapshots.h"
#include "js/ProfilingFrameIterator.h"
#include "vm/JSFunction.h"
#include "vm/JSScript.h"

namespace js {

class ArgumentsObject;

namespace jit {

enum class FrameType {
  // A JS frame is analogous to a js::InterpreterFrame, representing one
  // scripted function activation. IonJS frames are used by the optimizing
  // compiler.
  IonJS,

  // JS frame used by the Baseline Interpreter and Baseline JIT.
  BaselineJS,

  // Frame pushed by Baseline stubs that make non-tail calls, so that the
  // return address -> ICEntry mapping works.
  BaselineStub,

  // The entry frame is the initial prologue block transitioning from the VM
  // into the Ion world.
  CppToJSJit,

  // A rectifier frame sits in between two JS frames, adapting argc != nargs
  // mismatches in calls.
  Rectifier,

  // Ion IC calling a scripted getter/setter or a VMFunction.
  IonICCall,

  // An exit frame is necessary for transitioning from a JS frame into C++.
  // From within C++, an exit frame is always the last frame in any
  // JitActivation.
  Exit,

  // A bailout frame is a special IonJS jit frame after a bailout, and before
  // the reconstruction of the BaselineJS frame. From within C++, a bailout
  // frame is always the last frame in a JitActivation iff the bailout frame
  // information is recorded on the JitActivation.
  Bailout,

  // A wasm to JS frame is constructed during fast calls from wasm to the JS
  // jits, used as a marker to interleave JS jit and wasm frames. From the
  // point of view of JS JITs, this is just another kind of entry frame.
  WasmToJSJit,

  // A JS to wasm frame is constructed during fast calls from any JS jits to
  // wasm, and is a special kind of exit frame that doesn't have the exit
  // footer. From the point of view of the jit, it can be skipped as an exit.
  JSJitToWasm,
};

enum ReadFrameArgsBehavior {
  // Only read formals (i.e. [0 ... callee()->nargs]
  ReadFrame_Formals,

  // Only read overflown args (i.e. [callee()->nargs ... numActuals()]
  ReadFrame_Overflown,

  // Read all args (i.e. [0 ... numActuals()])
  ReadFrame_Actuals
};

class CommonFrameLayout;
class JitFrameLayout;
class ExitFrameLayout;

class BaselineFrame;
class JitActivation;
class SafepointIndex;
class OsiIndex;

// Iterate over the JIT stack to assert that all invariants are respected.
//  - Check that all entry frames are aligned on JitStackAlignment.
//  - Check that all rectifier frames keep the JitStackAlignment.

void AssertJitStackInvariants(JSContext* cx);

// A JSJitFrameIter can iterate over a linear frame group of JS jit frames
// only. It will stop at the first frame that is not of the same kind, or at
// the end of an activation.
//
// If you want to handle every kind of frames (including wasm frames), use
// JitFrameIter. If you want to skip interleaved frames of other kinds, use
// OnlyJSJitFrameIter.

class JSJitFrameIter {
 protected:
  uint8_t* current_;
  FrameType type_;
  uint8_t* resumePCinCurrentFrame_;

  // Size of the current Baseline frame. Equivalent to
  // BaselineFrame::debugFrameSize_ in debug builds.
  mozilla::Maybe<uint32_t> baselineFrameSize_;

 private:
  mutable const SafepointIndex* cachedSafepointIndex_;
  const JitActivation* activation_;

  void dumpBaseline() const;

 public:
  // See comment above the class.
  explicit JSJitFrameIter(const JitActivation* activation);

  // A constructor specialized for jit->wasm frames, which starts at a
  // specific FP.
  JSJitFrameIter(const JitActivation* activation, FrameType frameType,
                 uint8_t* fp);

  void setResumePCInCurrentFrame(uint8_t* newAddr) {
    resumePCinCurrentFrame_ = newAddr;
  }

  // Current frame information.
  FrameType type() const { return type_; }
  uint8_t* fp() const { return current_; }
  const JitActivation* activation() const { return activation_; }

  CommonFrameLayout* current() const { return (CommonFrameLayout*)current_; }

  inline uint8_t* returnAddress() const;

  // Return the pointer of the JitFrame, the iterator is assumed to be settled
  // on a scripted frame.
  JitFrameLayout* jsFrame() const;

  inline ExitFrameLayout* exitFrame() const;

  // Returns whether the JS frame has been invalidated and, if so,
  // places the invalidated Ion script in |ionScript|.
  bool checkInvalidation(IonScript** ionScript) const;
  bool checkInvalidation() const;

  bool isExitFrame() const { return type_ == FrameType::Exit; }
  bool isScripted() const {
    return type_ == FrameType::BaselineJS || type_ == FrameType::IonJS ||
           type_ == FrameType::Bailout;
  }
  bool isBaselineJS() const { return type_ == FrameType::BaselineJS; }
  bool isIonScripted() const {
    return type_ == FrameType::IonJS || type_ == FrameType::Bailout;
  }
  bool isIonJS() const { return type_ == FrameType::IonJS; }
  bool isIonICCall() const { return type_ == FrameType::IonICCall; }
  bool isBailoutJS() const { return type_ == FrameType::Bailout; }
  bool isBaselineStub() const { return type_ == FrameType::BaselineStub; }
  bool isRectifier() const { return type_ == FrameType::Rectifier; }
  bool isBareExit() const;
  bool isUnwoundJitExit() const;
  template <typename T>
  bool isExitFrameLayout() const;

  static bool isEntry(FrameType type) {
    return type == FrameType::CppToJSJit || type == FrameType::WasmToJSJit;
  }
  bool isEntry() const { return isEntry(type_); }

  bool isFunctionFrame() const;

  bool isConstructing() const;

  void* calleeToken() const;
  JSFunction* callee() const;
  JSFunction* maybeCallee() const;
  unsigned numActualArgs() const;
  JSScript* script() const;
  JSScript* maybeForwardedScript() const;
  void baselineScriptAndPc(JSScript** scriptRes, jsbytecode** pcRes) const;
  Value* actualArgs() const;

  // Returns the address of the next instruction that will execute in this
  // frame, once control returns to this frame.
  uint8_t* resumePCinCurrentFrame() const { return resumePCinCurrentFrame_; }

  // Previous frame information extracted from the current frame.
  inline FrameType prevType() const;
  uint8_t* prevFp() const;

  // Functions used to iterate on frames. When prevType is an entry,
  // the current frame is the last JS Jit frame.
  bool done() const { return isEntry(); }
  void operator++();

  // Returns the IonScript associated with this JS frame.
  IonScript* ionScript() const;

  // Returns the IonScript associated with this JS frame; the frame must
  // not be invalidated.
  IonScript* ionScriptFromCalleeToken() const;

  // Returns the Safepoint associated with this JS frame. Incurs a lookup
  // overhead.
  const SafepointIndex* safepoint() const;

  // Returns the OSI index associated with this JS frame. Incurs a lookup
  // overhead.
  const OsiIndex* osiIndex() const;

  // Returns the Snapshot offset associated with this JS frame. Incurs a
  // lookup overhead.
  SnapshotOffset snapshotOffset() const;

  uintptr_t* spillBase() const;
  MachineState machineState() const;

  template <class Op>
  void unaliasedForEachActual(Op op, ReadFrameArgsBehavior behavior) const {
    MOZ_ASSERT(isBaselineJS());

    unsigned nactual = numActualArgs();
    unsigned start, end;
    switch (behavior) {
      case ReadFrame_Formals:
        start = 0;
        end = callee()->nargs();
        break;
      case ReadFrame_Overflown:
        start = callee()->nargs();
        end = nactual;
        break;
      case ReadFrame_Actuals:
        start = 0;
        end = nactual;
    }

    Value* argv = actualArgs();
    for (unsigned i = start; i < end; i++) {
      op(argv[i]);
    }
  }

  void dump() const;

  inline BaselineFrame* baselineFrame() const;

  // Returns the number of local and expression stack Values for the current
  // Baseline frame.
  inline uint32_t baselineFrameNumValueSlots() const;

  // This function isn't used, but we keep it here (debug-only) because it is
  // helpful when chasing issues with the jitcode map.
#ifdef DEBUG
  bool verifyReturnAddressUsingNativeToBytecodeMap();
#else
  bool verifyReturnAddressUsingNativeToBytecodeMap() { return true; }
#endif
};

class JitcodeGlobalTable;

class JSJitProfilingFrameIterator {
  uint8_t* fp_;
  // See JS::ProfilingFrameIterator::endStackAddress_ comment.
  void* endStackAddress_ = nullptr;
  FrameType type_;
  void* resumePCinCurrentFrame_;

  inline JSScript* frameScript() const;
  [[nodiscard]] bool tryInitWithPC(void* pc);
  [[nodiscard]] bool tryInitWithTable(JitcodeGlobalTable* table, void* pc,
                                      bool forLastCallSite);

  void moveToNextFrame(CommonFrameLayout* frame);

 public:
  JSJitProfilingFrameIterator(JSContext* cx, void* pc, void* sp);
  explicit JSJitProfilingFrameIterator(CommonFrameLayout* exitFP);

  void operator++();
  bool done() const { return fp_ == nullptr; }

  const char* baselineInterpreterLabel() const;
  void baselineInterpreterScriptPC(JSScript** script, jsbytecode** pc,
                                   uint64_t* realmID) const;

  void* fp() const {
    MOZ_ASSERT(!done());
    return fp_;
  }
  inline JitFrameLayout* framePtr() const;
  void* stackAddress() const { return fp(); }
  FrameType frameType() const {
    MOZ_ASSERT(!done());
    return type_;
  }
  void* resumePCinCurrentFrame() const {
    MOZ_ASSERT(!done());
    return resumePCinCurrentFrame_;
  }

  void* endStackAddress() const { return endStackAddress_; }
};

class RInstructionResults {
  // Vector of results of recover instructions.
  typedef mozilla::Vector<HeapPtr<Value>, 1, SystemAllocPolicy> Values;
  UniquePtr<Values> results_;

  // The frame pointer is used as a key to check if the current frame already
  // bailed out.
  JitFrameLayout* fp_;

  // Record if we tried and succeed at allocating and filling the vector of
  // recover instruction results, if needed.  This flag is needed in order to
  // avoid evaluating the recover instruction twice.
  bool initialized_;

 public:
  explicit RInstructionResults(JitFrameLayout* fp);
  RInstructionResults(RInstructionResults&& src);

  RInstructionResults& operator=(RInstructionResults&& rhs);

  ~RInstructionResults();

  [[nodiscard]] bool init(JSContext* cx, uint32_t numResults);
  bool isInitialized() const;
  size_t length() const;

  JitFrameLayout* frame() const;

  HeapPtr<Value>& operator[](size_t index);

  void trace(JSTracer* trc);
};

struct MaybeReadFallback {
  enum FallbackConsequence { Fallback_Invalidate, Fallback_DoNothing };

  JSContext* maybeCx = nullptr;
  JitActivation* activation = nullptr;
  const JSJitFrameIter* frame = nullptr;
  const FallbackConsequence consequence = Fallback_Invalidate;

  MaybeReadFallback() = default;

  MaybeReadFallback(JSContext* cx, JitActivation* activation,
                    const JSJitFrameIter* frame,
                    FallbackConsequence consequence = Fallback_Invalidate)
      : maybeCx(cx),
        activation(activation),
        frame(frame),
        consequence(consequence) {}

  bool canRecoverResults() { return maybeCx; }
};

class RResumePoint;

// Reads frame information in snapshot-encoding order (that is, outermost frame
// to innermost frame).
class SnapshotIterator {
 protected:
  SnapshotReader snapshot_;
  RecoverReader recover_;
  JitFrameLayout* fp_;
  const MachineState* machine_;
  IonScript* ionScript_;
  RInstructionResults* instructionResults_;

  enum class ReadMethod : bool {
    // Read the normal value.
    Normal,

    // Read the default value, or the normal value if there is no default.
    AlwaysDefault,
  };

 private:
  // Read a spilled register from the machine state.
  bool hasRegister(Register reg) const { return machine_->has(reg); }
  uintptr_t fromRegister(Register reg) const { return machine_->read(reg); }

  bool hasRegister(FloatRegister reg) const { return machine_->has(reg); }
  template <typename T>
  T fromRegister(FloatRegister reg) const {
    return machine_->read<T>(reg);
  }

  // Read an uintptr_t from the stack.
  bool hasStack(int32_t offset) const { return true; }
  uintptr_t fromStack(int32_t offset) const;

  bool hasInstructionResult(uint32_t index) const {
    return instructionResults_;
  }
  bool hasInstructionResults() const { return instructionResults_; }
  Value fromInstructionResult(uint32_t index) const;

  Value allocationValue(const RValueAllocation& a,
                        ReadMethod rm = ReadMethod::Normal);
  [[nodiscard]] bool allocationReadable(const RValueAllocation& a,
                                        ReadMethod rm = ReadMethod::Normal);
  void writeAllocationValuePayload(const RValueAllocation& a, const Value& v);
  void warnUnreadableAllocation();

 public:
  // Handle iterating over RValueAllocations of the snapshots.
  inline RValueAllocation readAllocation() {
    MOZ_ASSERT(moreAllocations());
    return snapshot_.readAllocation();
  }
  void skip() { snapshot_.skipAllocation(); }

  const RResumePoint* resumePoint() const;
  const RInstruction* instruction() const { return recover_.instruction(); }

  uint32_t numAllocations() const;
  inline bool moreAllocations() const {
    return snapshot_.numAllocationsRead() < numAllocations();
  }

  JitFrameLayout* frame() { return fp_; };

  // Used by recover instruction to store the value back into the instruction
  // results array.
  void storeInstructionResult(const Value& v);

 public:
  // Exhibits frame properties contained in the snapshot.
  uint32_t pcOffset() const;
  ResumeMode resumeMode() const;

  bool resumeAfter() const {
    // Calls in outer frames are never considered resume-after.
    MOZ_ASSERT_IF(moreFrames(), !IsResumeAfter(resumeMode()));
    return IsResumeAfter(resumeMode());
  }
  inline BailoutKind bailoutKind() const { return snapshot_.bailoutKind(); }

 public:
  // Read the next instruction available and get ready to either skip it or
  // evaluate it.
  inline void nextInstruction() {
    MOZ_ASSERT(snapshot_.numAllocationsRead() == numAllocations());
    recover_.nextInstruction();
    snapshot_.resetNumAllocationsRead();
  }

  // Skip an Instruction by walking to the next instruction and by skipping
  // all the allocations corresponding to this instruction.
  void skipInstruction();

  inline bool moreInstructions() const { return recover_.moreInstructions(); }

  // Register a vector used for storing the results of the evaluation of
  // recover instructions. This vector should be registered before the
  // beginning of the iteration. This function is in charge of allocating
  // enough space for all instructions results, and return false iff it fails.
  [[nodiscard]] bool initInstructionResults(MaybeReadFallback& fallback);

 protected:
  // This function is used internally for computing the result of the recover
  // instructions.
  [[nodiscard]] bool computeInstructionResults(
      JSContext* cx, RInstructionResults* results) const;

 public:
  // Handle iterating over frames of the snapshots.
  void nextFrame();
  void settleOnFrame();

  inline bool moreFrames() const {
    // The last instruction is recovering the innermost frame, so as long as
    // there is more instruction there is necesseray more frames.
    return moreInstructions();
  }

 public:
  // Connect all informations about the current script in order to recover the
  // content of baseline frames.

  SnapshotIterator(const JSJitFrameIter& iter,
                   const MachineState* machineState);
  SnapshotIterator();

  Value read() { return allocationValue(readAllocation()); }

  // Read the |Normal| value unless it is not available and that the snapshot
  // provides a |Default| value. This is useful to avoid invalidations of the
  // frame while we are only interested in a few properties which are provided
  // by the |Default| value.
  Value readWithDefault(RValueAllocation* alloc) {
    *alloc = RValueAllocation();
    RValueAllocation a = readAllocation();
    if (allocationReadable(a)) {
      return allocationValue(a);
    }

    *alloc = a;
    return allocationValue(a, ReadMethod::AlwaysDefault);
  }

  Value maybeRead(const RValueAllocation& a, MaybeReadFallback& fallback);
  Value maybeRead(MaybeReadFallback& fallback) {
    RValueAllocation a = readAllocation();
    return maybeRead(a, fallback);
  }

  bool tryRead(Value* result);

  void traceAllocation(JSTracer* trc);

  template <class Op>
  void readFunctionFrameArgs(Op& op, ArgumentsObject** argsObj, Value* thisv,
                             unsigned start, unsigned end, JSScript* script,
                             MaybeReadFallback& fallback) {
    // Assumes that the common frame arguments have already been read.
    if (script->needsArgsObj()) {
      if (argsObj) {
        Value v = maybeRead(fallback);
        if (v.isObject()) {
          *argsObj = &v.toObject().as<ArgumentsObject>();
        }
      } else {
        skip();
      }
    }

    if (thisv) {
      *thisv = maybeRead(fallback);
    } else {
      skip();
    }

    unsigned i = 0;
    if (end < start) {
      i = start;
    }

    for (; i < start; i++) {
      skip();
    }
    for (; i < end; i++) {
      // We are not always able to read values from the snapshots, some values
      // such as non-gc things may still be live in registers and cause an
      // error while reading the machine state.
      Value v = maybeRead(fallback);
      op(v);
    }
  }

  // Iterate over all the allocations and return only the value of the
  // allocation located at one index.
  Value maybeReadAllocByIndex(size_t index);

#ifdef TRACK_SNAPSHOTS
  void spewBailingFrom() const { snapshot_.spewBailingFrom(); }
#endif
};

// Reads frame information in callstack order (that is, innermost frame to
// outermost frame).
class InlineFrameIterator {
  const JSJitFrameIter* frame_;
  SnapshotIterator start_;
  SnapshotIterator si_;
  uint32_t framesRead_;

  // When the inline-frame-iterator is created, this variable is defined to
  // UINT32_MAX. Then the first iteration of findNextFrame, which settle on
  // the innermost frame, is used to update this counter to the number of
  // frames contained in the recover buffer.
  uint32_t frameCount_;

  // The |calleeTemplate_| fields contains either the JSFunction or the
  // template from which it is supposed to be cloned. The |calleeRVA_| is an
  // Invalid value allocation, if the |calleeTemplate_| field is the effective
  // JSFunction, and not its template. On the other hand, any other value
  // allocation implies that the |calleeTemplate_| is the template JSFunction
  // from which the effective one would be derived and cached by the Recover
  // instruction result.
  RootedFunction calleeTemplate_;
  RValueAllocation calleeRVA_;

  RootedScript script_;
  jsbytecode* pc_;
  uint32_t numActualArgs_;

  // Register state, used by all snapshot iterators.
  MachineState machine_;

  struct Nop {
    void operator()(const Value& v) {}
  };

 private:
  void findNextFrame();
  JSObject* computeEnvironmentChain(const Value& envChainValue,
                                    MaybeReadFallback& fallback,
                                    bool* hasInitialEnv = nullptr) const;

 public:
  InlineFrameIterator(JSContext* cx, const JSJitFrameIter* iter);
  InlineFrameIterator(JSContext* cx, const InlineFrameIterator* iter);

  bool more() const { return frame_ && framesRead_ < frameCount_; }

  // Due to optimizations, we are not always capable of reading the callee of
  // inlined frames without invalidating the IonCode. This function might
  // return either the effective callee of the JSFunction which might be used
  // to create it.
  //
  // As such, the |calleeTemplate()| can be used to read most of the metadata
  // which are conserved across clones.
  JSFunction* calleeTemplate() const {
    MOZ_ASSERT(isFunctionFrame());
    return calleeTemplate_;
  }
  JSFunction* maybeCalleeTemplate() const { return calleeTemplate_; }

  JSFunction* callee(MaybeReadFallback& fallback) const;

  unsigned numActualArgs() const {
    // The number of actual arguments for inline frames is determined by this
    // iterator based on the caller's bytecode instruction (Call, FunCall,
    // GetProp/SetProp, etc). For the outer function it's stored in the stack
    // frame.
    if (more()) {
      return numActualArgs_;
    }

    return frame_->numActualArgs();
  }

  template <class ArgOp, class LocalOp>
  void readFrameArgsAndLocals(JSContext* cx, ArgOp& argOp, LocalOp& localOp,
                              JSObject** envChain, bool* hasInitialEnv,
                              Value* rval, ArgumentsObject** argsObj,
                              Value* thisv, ReadFrameArgsBehavior behavior,
                              MaybeReadFallback& fallback) const {
    SnapshotIterator s(si_);

    // Read the env chain.
    if (envChain) {
      Value envChainValue = s.maybeRead(fallback);
      *envChain =
          computeEnvironmentChain(envChainValue, fallback, hasInitialEnv);
    } else {
      s.skip();
    }

    // Read return value.
    if (rval) {
      *rval = s.maybeRead(fallback);
    } else {
      s.skip();
    }

    // Read arguments, which only function frames have.
    if (isFunctionFrame()) {
      unsigned nactual = numActualArgs();
      unsigned nformal = calleeTemplate()->nargs();

      // Get the non overflown arguments, which are taken from the inlined
      // frame, because it will have the updated value when JSOp::SetArg is
      // done.
      if (behavior != ReadFrame_Overflown) {
        s.readFunctionFrameArgs(argOp, argsObj, thisv, 0, nformal, script(),
                                fallback);
      }

      if (behavior != ReadFrame_Formals) {
        if (more()) {
          // There is still a parent frame of this inlined frame.  All
          // arguments (also the overflown) are the last pushed values
          // in the parent frame.  To get the overflown arguments, we
          // need to take them from there.

          // The overflown arguments are not available in current frame.
          // They are the last pushed arguments in the parent frame of
          // this inlined frame.
          InlineFrameIterator it(cx, this);
          ++it;
          unsigned argsObjAdj = it.script()->needsArgsObj() ? 1 : 0;
          bool hasNewTarget = isConstructing();
          SnapshotIterator parent_s(it.snapshotIterator());

          // Skip over all slots until we get to the last slots
          // (= arguments slots of callee) the +3 is for [this], [returnvalue],
          // [envchain], and maybe +1 for [argsObj]
          MOZ_ASSERT(parent_s.numAllocations() >=
                     nactual + 3 + argsObjAdj + hasNewTarget);
          unsigned skip = parent_s.numAllocations() - nactual - 3 - argsObjAdj -
                          hasNewTarget;
          for (unsigned j = 0; j < skip; j++) {
            parent_s.skip();
          }

          // Get the overflown arguments
          parent_s.skip();  // env chain
          parent_s.skip();  // return value
          parent_s.readFunctionFrameArgs(argOp, nullptr, nullptr, nformal,
                                         nactual, it.script(), fallback);
        } else {
          // There is no parent frame to this inlined frame, we can read
          // from the frame's Value vector directly.
          Value* argv = frame_->actualArgs();
          for (unsigned i = nformal; i < nactual; i++) {
            argOp(argv[i]);
          }
        }
      }
    }

    // At this point we've read all the formals in s, and can read the
    // locals.
    for (unsigned i = 0; i < script()->nfixed(); i++) {
      localOp(s.maybeRead(fallback));
    }
  }

  template <class Op>
  void unaliasedForEachActual(JSContext* cx, Op op,
                              ReadFrameArgsBehavior behavior,
                              MaybeReadFallback& fallback) const {
    Nop nop;
    readFrameArgsAndLocals(cx, op, nop, nullptr, nullptr, nullptr, nullptr,
                           nullptr, behavior, fallback);
  }

  JSScript* script() const { return script_; }
  jsbytecode* pc() const { return pc_; }
  SnapshotIterator snapshotIterator() const { return si_; }
  bool isFunctionFrame() const;
  bool isModuleFrame() const;
  bool isConstructing() const;

  JSObject* environmentChain(MaybeReadFallback& fallback,
                             bool* hasInitialEnvironment = nullptr) const {
    SnapshotIterator s(si_);

    // envChain
    Value v = s.maybeRead(fallback);
    return computeEnvironmentChain(v, fallback, hasInitialEnvironment);
  }

  Value thisArgument(MaybeReadFallback& fallback) const {
    SnapshotIterator s(si_);

    // envChain
    s.skip();

    // return value
    s.skip();

    // Arguments object.
    if (script()->needsArgsObj()) {
      s.skip();
    }

    return s.maybeRead(fallback);
  }

  InlineFrameIterator& operator++() {
    findNextFrame();
    return *this;
  }

  void dump() const;

  void resetOn(const JSJitFrameIter* iter);

  const JSJitFrameIter& frame() const { return *frame_; }

  // Inline frame number, 0 for the outermost (non-inlined) frame.
  size_t frameNo() const { return frameCount() - framesRead_; }
  size_t frameCount() const {
    MOZ_ASSERT(frameCount_ != UINT32_MAX);
    return frameCount_;
  }

 private:
  InlineFrameIterator() = delete;
  InlineFrameIterator(const InlineFrameIterator& iter) = delete;
};

}  // namespace jit
}  // namespace js

#endif /* jit_JSJitFrameIter_h */