# This Source Code Form is subject to the terms of the Mozilla Public # License, v. 2.0. If a copy of the MPL was not distributed with this # file, You can obtain one at http://mozilla.org/MPL/2.0/. # # The following are used by the imap code to display progress/status/error messages # #LOCALIZATION NOTE(imapAlertDialogTile): Do not translate the word "%S" # below. Place the word %S where the account name should appear. imapAlertDialogTitle=Alert for account %S # Status - opening folder imapStatusSelectingMailbox=Opening folder %S… # Status - create folder imapStatusCreatingMailbox=Creating folder… # Status - deleting a folder # LOCALIZATION NOTE (imapStatusDeletingMailbox): The "%S" below should not be translated. # Instead, insert "%S" in your translation where you wish to display the name # of the folder being deleted. imapStatusDeletingMailbox=Deleting folder %S… # Status - renaming mailbox # LOCALIZATION NOTE (imapStatusRenamingMailbox): The "%S" below should not be translated. # Instead, insert "%S" in your translation where you wish to display the name # of the folder being renamed. imapStatusRenamingMailbox=Renaming folder %S… # Status - looking for mailboxes imapStatusLookingForMailbox=Looking for folders… # Status - subscribing to mailbox # LOCALIZATION NOTE (imapStatusSubscribeToMailbox): The "%S" below should not be translated. # Instead, insert "%S" in your translation where you wish to display the name # of the folder being subscribed to. imapStatusSubscribeToMailbox=Subscribing to folder %S… # Status - unsubscribing from mailbox # LOCALIZATION NOTE (imapStatusUnsubscribeMailbox): The "%S" below should not be translated. # Instead, insert "%S" in your translation where you wish to display the name # of the folder being unsubscribed from. imapStatusUnsubscribeMailbox=Unsubscribing from folder %S… # Status - searching imap folder imapStatusSearchMailbox=Searching folder… # Status - closing a folder imapStatusCloseMailbox=Closing folder… # Status - compacting a folder imapStatusExpungingMailbox=Compacting folder… # Status - logging out imapStatusLoggingOut=Logging out… # Status - checking server capabilities imapStatusCheckCompat=Checking mail server capabilities… # Status - logging on imapStatusSendingLogin=Sending login information… # Status - auth logon imapStatusSendingAuthLogin=Sending secure login information… # Status - downloading message imapDownloadingMessage=Downloading message… # Status - getting acl for folder # LOCALIZATION NOTE (imapGettingACLForFolder): Do not translate the word "ACL" below. imapGettingACLForFolder=Getting folder ACL… # Status - getting server info imapGettingServerInfo=Getting Server Configuration Info… # Status - getting mailbox info imapGettingMailboxInfo=Getting Mailbox Configuration Info… # Status - empty mime part imapEmptyMimePart=This body part will be downloaded on demand. # LOCALIZATION NOTE (imapReceivingMessageHeaders3): Do not translate the words "%1$S", "%2$S", and "%3$S" below. # Place the word %1$S in your translation where the number of the header being downloaded should appear. # Place the word %2$S in your translation where the total number of headers to be downloaded should appear. # Place the word %3$S in your translation where the name of the folder being processed should appear. # Note: The account name and separators (e.g. colon, space) are automatically added to the status message. # Example: "Joe's Account: Downloading message header 100 of 1000 in Drafts…" imapReceivingMessageHeaders3=Downloading message header %1$S of %2$S in %3$S… # LOCALIZATION NOTE (imapReceivingMessageFlags3): Do not translate the words "%1$S", "%2$S", and "%3$S" below. # Place the word %1$S in your translation where the number of the flag being downloaded should appear. # Place the word %2$S in your translation where the total number of flags to be downloaded should appear. # Place the word %3$S in your translation where the name of the folder being processed should appear. # Note: The account name and separators (e.g. colon, space) are automatically added to the status message. # Example: "Jim's Account: Downloading message flag 100 of 1000 in INBOX…" imapReceivingMessageFlags3=Downloading message flag %1$S of %2$S in %3$S… imapDeletingMessages=Deleting messages… imapDeletingMessage=Deleting message… # LOCALIZATION NOTE (imapMovingMessages): Do not translate the word "%S" below. # Place the word %S in your translation where the name of the folder should appear. imapMovingMessages=Moving messages to %S… # LOCALIZATION NOTE (imapMovingMessage): Do not translate the word "%S" below. # Place the word %S in your translation where the name of the folder should appear. imapMovingMessage=Moving message to %S… # LOCALIZATION NOTE (imapCopyingMessages): Do not translate the word "%S" below. # Place the word %S in your translation where the name of the folder should appear. imapCopyingMessages=Copying messages to %S… # LOCALIZATION NOTE (imapCopyingMessage): Do not translate the word "%S" below. # Place the word %S in your translation where the name of the folder should appear. imapCopyingMessage=Copying message to %S… # LOCALIZATION NOTE (imapFolderReceivingMessageOf3): Do not translate the words "%1$S", "%2$S", and "%3$S" below. # Place the word %1$S in your translation where the number of the message being downloaded should appear. # Place the word %2$S in your translation where the total number of messages to be downloaded should appear. # Place the word %3$S in your translation where the name of the folder being processed should appear. # Note: The account name and separators (e.g. colon, space) are automatically added to the status message. # Example: "Juan's Account: Downloading message 100 of 1000 in Sent…" imapFolderReceivingMessageOf3=Downloading message %1$S of %2$S in %3$S… # LOCALIZATION NOTE (imapDiscoveringMailbox): Do not translate the word "%S" below. # Place the word %S in your translation where the name of the folder should appear. imapDiscoveringMailbox=Found folder: %S # LOCALIZATION NOTE (imapEnterServerPasswordPrompt): Do not translate the words %1$S and %2$S below. # Place the word %1$S in your translation where the username should appear. # Place the word %2$S in your translation where the servername should appear. imapEnterServerPasswordPrompt=Enter your password for %1$S on %2$S: # LOCALIZATION NOTE (imapServerNotImap4): Do not translate the word "IMAP4" below. imapServerNotImap4=Mail server %S is not an IMAP4 mail server. # This is intentionally left blank. imapDone= # LOCALIZATION NOTE (imapEnterPasswordPromptTitleWithUsername): Do not translate the # word %1$S. Place the word %1$S where the user name should appear. imapEnterPasswordPromptTitleWithUsername=Enter your password for %1$S imapUnknownHostError=Failed to connect to server %S. imapOAuth2Error=Authentication failure while connecting to server %S. imapConnectionRefusedError=Could not connect to mail server %S; the connection was refused. imapNetTimeoutError=Connection to server %S timed out. # Status - no messages to download imapNoNewMessages=There are no new messages on the server. imapDefaultAccountName=Mail for %S imapSpecialChar2=The %S character is reserved on this imap server. Please choose another name. imapPersonalSharedFolderTypeName=Personal Folder imapPublicFolderTypeName=Public Folder imapOtherUsersFolderTypeName=Other User's Folder imapPersonalFolderTypeDescription=This is a personal mail folder. It is not shared. imapPersonalSharedFolderTypeDescription=This is a personal mail folder. It has been shared. imapPublicFolderTypeDescription=This is a public folder. imapOtherUsersFolderTypeDescription=This is a mail folder shared by the user '%S'. imapAclFullRights=Full Control imapAclLookupRight=Lookup imapAclReadRight=Read imapAclSeenRight=Set Read/Unread State imapAclWriteRight=Write imapAclInsertRight=Insert (Copy Into) imapAclPostRight=Post imapAclCreateRight=Create Subfolder imapAclDeleteRight=Delete Messages imapAclAdministerRight=Administer Folder imapServerDoesntSupportAcl=This server does not support shared folders. imapAclExpungeRight=Expunge imapServerDisconnected= Server %S has disconnected. The server may have gone down or there may be a network problem. # LOCALIZATION NOTE (autoSubscribeText): %1$S is the imap folder. imapSubscribePrompt=Would you like to subscribe to %1$S? imapServerDroppedConnection=Unable to connect to your IMAP server. You may have exceeded the maximum number \ of connections to this server. If so, use the Advanced IMAP Server Settings dialogue to \ reduce the number of cached connections. # This will occur when a folder that has never been imap selected or opened # (left-clicked) is first right-clicked to access quota properties. imapQuotaStatusFolderNotOpen=Quota information is not available because the folder is not open. # The imap capability response reports that QUOTA is not supported. imapQuotaStatusNotSupported=This server does not support quotas. # The getqutaroot command succeeded but reported no quota information. imapQuotaStatusNoQuota2=This folder reports no quota information. # Folder properties were requested by the user (right-click) before the getquotaroot # command was sent. imapQuotaStatusInProgress=Quota information not yet available. # Out of memory imapOutOfMemory=Application is out of memory. # LOCALIZATION NOTE (imapCopyingMessageOf2): Do not translate the word "%S" below. # Place the word %3$S in your translation where the name of the destination folder should appear. # Place the word %1$S where the currently copying message should appear. # Place the word %2$S where the total number of messages should appear. imapCopyingMessageOf2=Copying message %1$S of %2$S to %3$S… # LOCALIZATION NOTE (imapMoveFolderToTrash): Do not translate the word %S below. # "%S" is the name of the folder. imapMoveFolderToTrash=Are you sure you want to delete the folder '%S'? # LOCALIZATION NOTE (imapDeleteNoTrash): Do not translate the word %S below. # "%S" is the name of the folder. imapDeleteNoTrash=Deleting this folder cannot be undone; it will delete all of the messages it contains, and its sub-folders. Are you sure you still want to delete the folder '%S'? imapDeleteFolderDialogTitle=Delete Folder imapDeleteFolderButtonLabel=&Delete Folder # LOCALIZATION NOTE (imapAuthChangeEncryptToPlainSSL): %S is the server hostname imapAuthChangeEncryptToPlainSSL=The IMAP server %S does not seem to support encrypted passwords. If you have just set up this account, please try changing to 'Normal password' as the 'Authentication method' in the 'Account Settings | Server settings'. If it used to work and now suddenly fails, please contact your email administrator or provider. # LOCALIZATION NOTE (imapAuthChangePlainToEncrypt): %S is the server hostname imapAuthChangePlainToEncrypt=The IMAP server %S does not allow plaintext passwords. Please try changing to 'Encrypted password' as the 'Authentication method' in the 'Account Settings | Server settings'. # LOCALIZATION NOTE (imapAuthChangeEncryptToPlainNoSSL): %S is the server hostname imapAuthChangeEncryptToPlainNoSSL=The IMAP server %S does not seem to support encrypted passwords. If you have just set up the account, please try changing to 'Password, transmitted insecurely' as the 'Authentication method' in the 'Account Settings | Server settings'. If it used to work and now suddenly fails, this is a common scenario how someone could steal your password. # LOCALIZATION NOTE (imapAuthMechNotSupported): %S is the server hostname imapAuthMechNotSupported=The IMAP server %S does not support the selected authentication method. Please change the 'Authentication method' in the 'Account Settings | Server settings'. # LOCALIZATION NOTE (imapAuthGssapiFailed): %S is the server hostname imapAuthGssapiFailed=The Kerberos/GSSAPI ticket was not accepted by the IMAP server %S. Please check that you are logged in to the Kerberos/GSSAPI realm. # LOCALIZATION NOTE (imapServerCommandFailed): # Place the word %1$S in your translation where the name of the account name should appear. # Place the word %2$S in your translation where the server response should appear. imapServerCommandFailed=The current command did not succeed. The mail server for account %1$S responded: %2$S # LOCALIZATION NOTE (imapFolderCommandFailed): Do not translate the word %S below. # Place the word %1$S in your translation where the name of the account should appear. # Place the word %2$S in your translation where the name of the folder should appear. # Place the word %3$S in your translation where the server response should appear. imapFolderCommandFailed=The current operation on '%2$S' did not succeed. The mail server for account %1$S responded: %3$S # LOCALIZATION NOTE (imapServerAlert): # Place the word %1$S in your translation where the name of the account should appear. # Place the word %2$S in your translation where the alert from the server should appear. imapServerAlert=Alert from account %1$S: %2$S