/* -*- Mode: C++; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ /* vim: set ts=8 sts=2 et sw=2 tw=80: */ /* This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ // // Eric Vaughan // Netscape Communications // // See documentation in associated header file // // How boxes layout // ---------------- // Boxes layout a bit differently than html. html does a bottom up layout. Where // boxes do a top down. // // 1) First thing a box does it goes out and askes each child for its min, max, // and preferred sizes. // // 2) It then adds them up to determine its size. // // 3) If the box was asked to layout it self intrinically it will layout its // children at their preferred size otherwise it will layout the child at // the size it was told to. It will squeeze or stretch its children if // Necessary. // // However there is a catch. Some html components like block frames can not // determine their preferred size. this is their size if they were laid out // intrinsically. So the box will flow the child to determine this can cache the // value. // Boxes and Incremental Reflow // ---------------------------- // Boxes layout out top down by adding up their children's min, max, and // preferred sizes. Only problem is if a incremental reflow occurs. The // preferred size of a child deep in the hierarchy could change. And this could // change any number of syblings around the box. Basically any children in the // reflow chain must have their caches cleared so when asked for there current // size they can relayout themselves. #include "nsBoxFrame.h" #include #include #include "gfxUtils.h" #include "mozilla/ComputedStyle.h" #include "mozilla/CSSOrderAwareFrameIterator.h" #include "mozilla/Preferences.h" #include "mozilla/PresShell.h" #include "mozilla/dom/Touch.h" #include "mozilla/gfx/2D.h" #include "mozilla/gfx/gfxVars.h" #include "nsBoxLayout.h" #include "nsBoxLayoutState.h" #include "nsCOMPtr.h" #include "nsCSSAnonBoxes.h" #include "nsCSSRendering.h" #include "nsContainerFrame.h" #include "nsDisplayList.h" #include "nsGkAtoms.h" #include "nsHTMLParts.h" #include "nsIContent.h" #include "nsIFrameInlines.h" #include "nsIScrollableFrame.h" #include "nsITheme.h" #include "nsIWidget.h" #include "nsLayoutUtils.h" #include "nsNameSpaceManager.h" #include "nsPlaceholderFrame.h" #include "nsPresContext.h" #include "nsSliderFrame.h" #include "nsSprocketLayout.h" #include "nsStyleConsts.h" #include "nsTransform2D.h" #include "nsView.h" #include "nsViewManager.h" #include "nsWidgetsCID.h" // Needed for Print Preview #include "mozilla/TouchEvents.h" using namespace mozilla; using namespace mozilla::dom; using namespace mozilla::gfx; nsContainerFrame* NS_NewBoxFrame(PresShell* aPresShell, ComputedStyle* aStyle) { return new (aPresShell) nsBoxFrame(aStyle, aPresShell->GetPresContext()); } NS_IMPL_FRAMEARENA_HELPERS(nsBoxFrame) #ifdef DEBUG NS_QUERYFRAME_HEAD(nsBoxFrame) NS_QUERYFRAME_ENTRY(nsBoxFrame) NS_QUERYFRAME_TAIL_INHERITING(nsContainerFrame) #endif nsBoxFrame::nsBoxFrame(ComputedStyle* aStyle, nsPresContext* aPresContext, ClassID aID) : nsContainerFrame(aStyle, aPresContext, aID), mAscent(0) { AddStateBits(NS_STATE_IS_HORIZONTAL | NS_STATE_AUTO_STRETCH); mValign = vAlign_Top; mHalign = hAlign_Left; // Use the static sprocket layout nsCOMPtr layout; NS_NewSprocketLayout(layout); SetXULLayoutManager(layout); } nsBoxFrame::~nsBoxFrame() = default; nsIFrame* nsBoxFrame::SlowOrdinalGroupAwareSibling(nsIFrame* aBox, bool aNext) { nsIFrame* parent = aBox->GetParent(); if (!parent) { return nullptr; } CSSOrderAwareFrameIterator iter( parent, FrameChildListID::Principal, CSSOrderAwareFrameIterator::ChildFilter::IncludeAll, CSSOrderAwareFrameIterator::OrderState::Unknown, CSSOrderAwareFrameIterator::OrderingProperty::BoxOrdinalGroup); nsIFrame* prevSibling = nullptr; for (; !iter.AtEnd(); iter.Next()) { nsIFrame* current = iter.get(); if (!aNext && current == aBox) { return prevSibling; } if (aNext && prevSibling == aBox) { return current; } prevSibling = current; } return nullptr; } void nsBoxFrame::SetInitialChildList(ChildListID aListID, nsFrameList&& aChildList) { nsContainerFrame::SetInitialChildList(aListID, std::move(aChildList)); if (aListID == FrameChildListID::Principal) { // initialize our list of infos. nsBoxLayoutState state(PresContext()); if (mLayoutManager) mLayoutManager->ChildrenSet(this, state, mFrames.FirstChild()); } } /* virtual */ void nsBoxFrame::DidSetComputedStyle(ComputedStyle* aOldComputedStyle) { nsContainerFrame::DidSetComputedStyle(aOldComputedStyle); // The values that CacheAttributes() computes depend on our style, // so we need to recompute them here... CacheAttributes(); } /** * Initialize us. This is a good time to get the alignment of the box */ void nsBoxFrame::Init(nsIContent* aContent, nsContainerFrame* aParent, nsIFrame* aPrevInFlow) { nsContainerFrame::Init(aContent, aParent, aPrevInFlow); if (HasAnyStateBits(NS_FRAME_FONT_INFLATION_CONTAINER)) { AddStateBits(NS_FRAME_FONT_INFLATION_FLOW_ROOT); } MarkIntrinsicISizesDirty(); CacheAttributes(); } void nsBoxFrame::CacheAttributes() { /* printf("Caching: "); XULDumpBox(stdout); printf("\n"); */ mValign = vAlign_Top; mHalign = hAlign_Left; bool orient = false; GetInitialOrientation(orient); if (orient) AddStateBits(NS_STATE_IS_HORIZONTAL); else RemoveStateBits(NS_STATE_IS_HORIZONTAL); bool normal = true; GetInitialDirection(normal); if (normal) AddStateBits(NS_STATE_IS_DIRECTION_NORMAL); else RemoveStateBits(NS_STATE_IS_DIRECTION_NORMAL); GetInitialVAlignment(mValign); GetInitialHAlignment(mHalign); bool autostretch = !!(mState & NS_STATE_AUTO_STRETCH); GetInitialAutoStretch(autostretch); if (autostretch) AddStateBits(NS_STATE_AUTO_STRETCH); else RemoveStateBits(NS_STATE_AUTO_STRETCH); } bool nsBoxFrame::GetInitialHAlignment(nsBoxFrame::Halignment& aHalign) { if (!GetContent()) return false; // For horizontal boxes we're checking PACK. For vertical boxes we are // checking ALIGN. const nsStyleXUL* boxInfo = StyleXUL(); if (IsXULHorizontal()) { switch (boxInfo->mBoxPack) { case StyleBoxPack::Start: aHalign = nsBoxFrame::hAlign_Left; return true; case StyleBoxPack::Center: aHalign = nsBoxFrame::hAlign_Center; return true; case StyleBoxPack::End: aHalign = nsBoxFrame::hAlign_Right; return true; default: // Nonsensical value. Just bail. return false; } } else { switch (boxInfo->mBoxAlign) { case StyleBoxAlign::Start: aHalign = nsBoxFrame::hAlign_Left; return true; case StyleBoxAlign::Center: aHalign = nsBoxFrame::hAlign_Center; return true; case StyleBoxAlign::End: aHalign = nsBoxFrame::hAlign_Right; return true; default: // Nonsensical value. Just bail. return false; } } } bool nsBoxFrame::GetInitialVAlignment(nsBoxFrame::Valignment& aValign) { if (!GetContent()) return false; // For horizontal boxes we're checking ALIGN. For vertical boxes we are // checking PACK. const nsStyleXUL* boxInfo = StyleXUL(); if (IsXULHorizontal()) { switch (boxInfo->mBoxAlign) { case StyleBoxAlign::Start: aValign = nsBoxFrame::vAlign_Top; return true; case StyleBoxAlign::Center: aValign = nsBoxFrame::vAlign_Middle; return true; case StyleBoxAlign::Baseline: aValign = nsBoxFrame::vAlign_BaseLine; return true; case StyleBoxAlign::End: aValign = nsBoxFrame::vAlign_Bottom; return true; default: // Nonsensical value. Just bail. return false; } } else { switch (boxInfo->mBoxPack) { case StyleBoxPack::Start: aValign = nsBoxFrame::vAlign_Top; return true; case StyleBoxPack::Center: aValign = nsBoxFrame::vAlign_Middle; return true; case StyleBoxPack::End: aValign = nsBoxFrame::vAlign_Bottom; return true; default: // Nonsensical value. Just bail. return false; } } } void nsBoxFrame::GetInitialOrientation(bool& aIsHorizontal) { // see if we are a vertical or horizontal box. if (!GetContent()) return; const nsStyleXUL* boxInfo = StyleXUL(); if (boxInfo->mBoxOrient == StyleBoxOrient::Horizontal) { aIsHorizontal = true; } else { aIsHorizontal = false; } } void nsBoxFrame::GetInitialDirection(bool& aIsNormal) { if (!GetContent()) return; if (IsXULHorizontal()) { // For horizontal boxes only, we initialize our value based off the CSS // 'direction' property. This means that BiDI users will end up with // horizontally inverted chrome. // // If text runs RTL then so do we. aIsNormal = StyleVisibility()->mDirection == StyleDirection::Ltr; if (GetContent()->IsElement()) { Element* element = GetContent()->AsElement(); // Now see if we have an attribute. The attribute overrides // the style system 'direction' property. static Element::AttrValuesArray strings[] = {nsGkAtoms::ltr, nsGkAtoms::rtl, nullptr}; int32_t index = element->FindAttrValueIn( kNameSpaceID_None, nsGkAtoms::dir, strings, eCaseMatters); if (index >= 0) { bool values[] = {true, false}; aIsNormal = values[index]; } } } else { aIsNormal = true; // Assume a normal direction in the vertical case. } // Now check the style system to see if we should invert aIsNormal. const nsStyleXUL* boxInfo = StyleXUL(); if (boxInfo->mBoxDirection == StyleBoxDirection::Reverse) { aIsNormal = !aIsNormal; // Invert our direction. } } /* Returns true if it was set. */ bool nsBoxFrame::GetInitialAutoStretch(bool& aStretch) { if (!GetContent()) return false; // Check the CSS box-align property. const nsStyleXUL* boxInfo = StyleXUL(); aStretch = (boxInfo->mBoxAlign == StyleBoxAlign::Stretch); return true; } void nsBoxFrame::DidReflow(nsPresContext* aPresContext, const ReflowInput* aReflowInput) { nsFrameState preserveBits = mState & (NS_FRAME_IS_DIRTY | NS_FRAME_HAS_DIRTY_CHILDREN); nsIFrame::DidReflow(aPresContext, aReflowInput); AddStateBits(preserveBits); if (preserveBits & NS_FRAME_IS_DIRTY) { this->MarkSubtreeDirty(); } } bool nsBoxFrame::HonorPrintBackgroundSettings() const { return !mContent->IsInNativeAnonymousSubtree() && nsContainerFrame::HonorPrintBackgroundSettings(); } #ifdef DO_NOISY_REFLOW static int myCounter = 0; static void printSize(char* aDesc, nscoord aSize) { printf(" %s: ", aDesc); if (aSize == NS_UNCONSTRAINEDSIZE) { printf("UC"); } else { printf("%d", aSize); } } #endif /* virtual */ nscoord nsBoxFrame::GetMinISize(gfxContext* aRenderingContext) { nscoord result; DISPLAY_MIN_INLINE_SIZE(this, result); nsBoxLayoutState state(PresContext(), aRenderingContext); nsSize minSize = GetXULMinSize(state); // GetXULMinSize returns border-box width, and we want to return content // width. Since Reflow uses the reflow input's border and padding, we // actually just want to subtract what GetXULMinSize added, which is the // result of GetXULBorderAndPadding. nsMargin bp; GetXULBorderAndPadding(bp); result = minSize.width - bp.LeftRight(); result = std::max(result, 0); return result; } /* virtual */ nscoord nsBoxFrame::GetPrefISize(gfxContext* aRenderingContext) { nscoord result; DISPLAY_PREF_INLINE_SIZE(this, result); nsBoxLayoutState state(PresContext(), aRenderingContext); nsSize prefSize = GetXULPrefSize(state); // GetXULPrefSize returns border-box width, and we want to return content // width. Since Reflow uses the reflow input's border and padding, we // actually just want to subtract what GetXULPrefSize added, which is the // result of GetXULBorderAndPadding. nsMargin bp; GetXULBorderAndPadding(bp); result = prefSize.width - bp.LeftRight(); result = std::max(result, 0); return result; } void nsBoxFrame::Reflow(nsPresContext* aPresContext, ReflowOutput& aDesiredSize, const ReflowInput& aReflowInput, nsReflowStatus& aStatus) { MarkInReflow(); // If you make changes to this method, please keep nsLeafBoxFrame::Reflow // in sync, if the changes are applicable there. DO_GLOBAL_REFLOW_COUNT("nsBoxFrame"); DISPLAY_REFLOW(aPresContext, this, aReflowInput, aDesiredSize, aStatus); MOZ_ASSERT(aStatus.IsEmpty(), "Caller should pass a fresh reflow status!"); NS_ASSERTION( aReflowInput.ComputedWidth() >= 0 && aReflowInput.ComputedHeight() >= 0, "Computed Size < 0"); #ifdef DO_NOISY_REFLOW printf( "\n-------------Starting BoxFrame Reflow ----------------------------\n"); printf("%p ** nsBF::Reflow %d ", this, myCounter++); printSize("AW", aReflowInput.AvailableWidth()); printSize("AH", aReflowInput.AvailableHeight()); printSize("CW", aReflowInput.ComputedWidth()); printSize("CH", aReflowInput.ComputedHeight()); printf(" *\n"); #endif // create the layout state nsBoxLayoutState state(aPresContext, aReflowInput.mRenderingContext, &aReflowInput, aReflowInput.mReflowDepth); WritingMode wm = aReflowInput.GetWritingMode(); LogicalSize computedSize = aReflowInput.ComputedSize(); LogicalMargin m = aReflowInput.ComputedLogicalBorderPadding(wm); // GetXULBorderAndPadding(m); LogicalSize prefSize(wm); // if we are told to layout intrinsic then get our preferred size. NS_ASSERTION(computedSize.ISize(wm) != NS_UNCONSTRAINEDSIZE, "computed inline size should always be computed"); if (computedSize.BSize(wm) == NS_UNCONSTRAINEDSIZE) { nsSize physicalPrefSize = GetXULPrefSize(state); nsSize minSize = GetXULMinSize(state); nsSize maxSize = GetXULMaxSize(state); // XXXbz isn't GetXULPrefSize supposed to bounds-check for us? physicalPrefSize = XULBoundsCheck(minSize, physicalPrefSize, maxSize); prefSize = LogicalSize(wm, physicalPrefSize); } // get our desiredSize computedSize.ISize(wm) += m.IStart(wm) + m.IEnd(wm); if (aReflowInput.ComputedBSize() == NS_UNCONSTRAINEDSIZE) { computedSize.BSize(wm) = prefSize.BSize(wm); // prefSize is border-box but min/max constraints are content-box. nscoord blockDirBorderPadding = aReflowInput.ComputedLogicalBorderPadding(wm).BStartEnd(wm); nscoord contentBSize = computedSize.BSize(wm) - blockDirBorderPadding; // Note: contentHeight might be negative, but that's OK because min-height // is never negative. computedSize.BSize(wm) = aReflowInput.ApplyMinMaxHeight(contentBSize) + blockDirBorderPadding; } else { computedSize.BSize(wm) += m.BStart(wm) + m.BEnd(wm); } nsSize physicalSize = computedSize.GetPhysicalSize(wm); nsRect r(mRect.x, mRect.y, physicalSize.width, physicalSize.height); SetXULBounds(state, r); // layout our children XULLayout(state); // ok our child could have gotten bigger. So lets get its bounds // get the ascent LogicalSize boxSize = GetLogicalSize(wm); nscoord ascent = boxSize.BSize(wm); // getting the ascent could be a lot of work. Don't get it if // we are the root. The viewport doesn't care about it. if (!Style()->IsRootElementStyle()) { ascent = GetXULBoxAscent(state); } aDesiredSize.SetSize(wm, boxSize); aDesiredSize.SetBlockStartAscent(ascent); aDesiredSize.mOverflowAreas = GetOverflowAreas(); #ifdef DO_NOISY_REFLOW { printf("%p ** nsBF(done) W:%d H:%d ", this, aDesiredSize.Width(), aDesiredSize.Height()); if (maxElementSize) { printf("MW:%d\n", *maxElementWidth); } else { printf("MW:?\n"); } } #endif ReflowAbsoluteFrames(aPresContext, aDesiredSize, aReflowInput, aStatus); } nsSize nsBoxFrame::GetXULPrefSize(nsBoxLayoutState& aBoxLayoutState) { NS_ASSERTION(aBoxLayoutState.GetRenderingContext(), "must have rendering context"); nsSize size(0, 0); DISPLAY_PREF_SIZE(this, size); if (!XULNeedsRecalc(mPrefSize)) { size = mPrefSize; return size; } if (IsXULCollapsed()) return size; // if the size was not completely redefined in CSS then ask our children bool widthSet, heightSet; if (!nsIFrame::AddXULPrefSize(this, size, widthSet, heightSet)) { if (mLayoutManager) { nsSize layoutSize = mLayoutManager->GetXULPrefSize(this, aBoxLayoutState); if (!widthSet) size.width = layoutSize.width; if (!heightSet) size.height = layoutSize.height; } else { size = nsIFrame::GetUncachedXULPrefSize(aBoxLayoutState); } } nsSize minSize = GetXULMinSize(aBoxLayoutState); nsSize maxSize = GetXULMaxSize(aBoxLayoutState); mPrefSize = XULBoundsCheck(minSize, size, maxSize); return mPrefSize; } nscoord nsBoxFrame::GetXULBoxAscent(nsBoxLayoutState& aBoxLayoutState) { if (!XULNeedsRecalc(mAscent)) { return mAscent; } if (IsXULCollapsed()) { return 0; } if (mLayoutManager) { mAscent = mLayoutManager->GetAscent(this, aBoxLayoutState); } else { mAscent = GetXULPrefSize(aBoxLayoutState).height; } return mAscent; } nsSize nsBoxFrame::GetXULMinSize(nsBoxLayoutState& aBoxLayoutState) { NS_ASSERTION(aBoxLayoutState.GetRenderingContext(), "must have rendering context"); nsSize size(0, 0); DISPLAY_MIN_SIZE(this, size); if (!XULNeedsRecalc(mMinSize)) { size = mMinSize; return size; } if (IsXULCollapsed()) return size; // if the size was not completely redefined in CSS then ask our children bool widthSet, heightSet; if (!nsIFrame::AddXULMinSize(this, size, widthSet, heightSet)) { if (mLayoutManager) { nsSize layoutSize = mLayoutManager->GetXULMinSize(this, aBoxLayoutState); if (!widthSet) size.width = layoutSize.width; if (!heightSet) size.height = layoutSize.height; } else { size = nsIFrame::GetUncachedXULMinSize(aBoxLayoutState); } } mMinSize = size; return size; } nsSize nsBoxFrame::GetXULMaxSize(nsBoxLayoutState& aBoxLayoutState) { NS_ASSERTION(aBoxLayoutState.GetRenderingContext(), "must have rendering context"); nsSize size(NS_UNCONSTRAINEDSIZE, NS_UNCONSTRAINEDSIZE); DISPLAY_MAX_SIZE(this, size); if (!XULNeedsRecalc(mMaxSize)) { size = mMaxSize; return size; } if (IsXULCollapsed()) return size; // if the size was not completely redefined in CSS then ask our children bool widthSet, heightSet; if (!nsIFrame::AddXULMaxSize(this, size, widthSet, heightSet)) { if (mLayoutManager) { nsSize layoutSize = mLayoutManager->GetXULMaxSize(this, aBoxLayoutState); if (!widthSet) size.width = layoutSize.width; if (!heightSet) size.height = layoutSize.height; } else { size = nsIFrame::GetUncachedXULMaxSize(aBoxLayoutState); } } mMaxSize = size; return size; } /** * If subclassing please subclass this method not layout. * layout will call this method. */ NS_IMETHODIMP nsBoxFrame::DoXULLayout(nsBoxLayoutState& aState) { ReflowChildFlags oldFlags = aState.LayoutFlags(); aState.SetLayoutFlags(ReflowChildFlags::Default); nsresult rv = NS_OK; if (mLayoutManager) { XULCoordNeedsRecalc(mAscent); rv = mLayoutManager->XULLayout(this, aState); } aState.SetLayoutFlags(oldFlags); if (HasAbsolutelyPositionedChildren()) { // Set up a |reflowInput| to pass into ReflowAbsoluteFrames WritingMode wm = GetWritingMode(); ReflowInput reflowInput( aState.PresContext(), this, aState.GetRenderingContext(), LogicalSize(wm, GetLogicalSize().ISize(wm), NS_UNCONSTRAINEDSIZE)); // Set up a |desiredSize| to pass into ReflowAbsoluteFrames ReflowOutput desiredSize(reflowInput); desiredSize.Width() = mRect.width; desiredSize.Height() = mRect.height; // get the ascent (cribbed from ::Reflow) nscoord ascent = mRect.height; // getting the ascent could be a lot of work. Don't get it if // we are the root. The viewport doesn't care about it. if (!Style()->IsRootElementStyle()) { ascent = GetXULBoxAscent(aState); } desiredSize.SetBlockStartAscent(ascent); desiredSize.mOverflowAreas = GetOverflowAreas(); AddStateBits(NS_FRAME_IN_REFLOW); // Set up a |reflowStatus| to pass into ReflowAbsoluteFrames // (just a dummy value; hopefully that's OK) nsReflowStatus reflowStatus; ReflowAbsoluteFrames(aState.PresContext(), desiredSize, reflowInput, reflowStatus); RemoveStateBits(NS_FRAME_IN_REFLOW); } return rv; } void nsBoxFrame::DestroyFrom(nsIFrame* aDestructRoot, PostDestroyData& aPostDestroyData) { // clean up the container box's layout manager and child boxes SetXULLayoutManager(nullptr); nsContainerFrame::DestroyFrom(aDestructRoot, aPostDestroyData); } /* virtual */ void nsBoxFrame::MarkIntrinsicISizesDirty() { XULSizeNeedsRecalc(mPrefSize); XULSizeNeedsRecalc(mMinSize); XULSizeNeedsRecalc(mMaxSize); XULCoordNeedsRecalc(mAscent); if (mLayoutManager) { nsBoxLayoutState state(PresContext()); mLayoutManager->IntrinsicISizesDirty(this, state); } nsContainerFrame::MarkIntrinsicISizesDirty(); } void nsBoxFrame::RemoveFrame(ChildListID aListID, nsIFrame* aOldFrame) { MOZ_ASSERT(aListID == FrameChildListID::Principal, "We don't support out-of-flow kids"); nsPresContext* presContext = PresContext(); nsBoxLayoutState state(presContext); // remove the child frame mFrames.RemoveFrame(aOldFrame); // notify the layout manager if (mLayoutManager) mLayoutManager->ChildrenRemoved(this, state, aOldFrame); // destroy the child frame aOldFrame->Destroy(); // mark us dirty and generate a reflow command PresShell()->FrameNeedsReflow(this, IntrinsicDirty::FrameAndAncestors, NS_FRAME_HAS_DIRTY_CHILDREN); } void nsBoxFrame::InsertFrames(ChildListID aListID, nsIFrame* aPrevFrame, const nsLineList::iterator* aPrevFrameLine, nsFrameList&& aFrameList) { NS_ASSERTION(!aPrevFrame || aPrevFrame->GetParent() == this, "inserting after sibling frame with different parent"); NS_ASSERTION(!aPrevFrame || mFrames.ContainsFrame(aPrevFrame), "inserting after sibling frame not in our child list"); MOZ_ASSERT(aListID == FrameChildListID::Principal, "We don't support out-of-flow kids"); nsBoxLayoutState state(PresContext()); // insert the child frames const nsFrameList::Slice& newFrames = mFrames.InsertFrames(this, aPrevFrame, std::move(aFrameList)); // notify the layout manager if (mLayoutManager) mLayoutManager->ChildrenInserted(this, state, aPrevFrame, newFrames); PresShell()->FrameNeedsReflow(this, IntrinsicDirty::FrameAndAncestors, NS_FRAME_HAS_DIRTY_CHILDREN); } void nsBoxFrame::AppendFrames(ChildListID aListID, nsFrameList&& aFrameList) { MOZ_ASSERT(aListID == FrameChildListID::Principal, "We don't support out-of-flow kids"); nsBoxLayoutState state(PresContext()); // append the new frames const nsFrameList::Slice& newFrames = mFrames.AppendFrames(this, std::move(aFrameList)); // notify the layout manager if (mLayoutManager) mLayoutManager->ChildrenAppended(this, state, newFrames); // XXXbz why is this NS_FRAME_FIRST_REFLOW check here? if (!HasAnyStateBits(NS_FRAME_FIRST_REFLOW)) { PresShell()->FrameNeedsReflow(this, IntrinsicDirty::FrameAndAncestors, NS_FRAME_HAS_DIRTY_CHILDREN); } } nsresult nsBoxFrame::AttributeChanged(int32_t aNameSpaceID, nsAtom* aAttribute, int32_t aModType) { nsresult rv = nsContainerFrame::AttributeChanged(aNameSpaceID, aAttribute, aModType); // Ignore 'width', 'height', 'screenX', 'screenY' and 'sizemode' on a // . if (mContent->IsXULElement(nsGkAtoms::window) && (nsGkAtoms::width == aAttribute || nsGkAtoms::height == aAttribute || nsGkAtoms::screenX == aAttribute || nsGkAtoms::screenY == aAttribute || nsGkAtoms::sizemode == aAttribute)) { return rv; } if (aAttribute == nsGkAtoms::width || aAttribute == nsGkAtoms::height || aAttribute == nsGkAtoms::align || aAttribute == nsGkAtoms::valign || aAttribute == nsGkAtoms::minwidth || aAttribute == nsGkAtoms::maxwidth || aAttribute == nsGkAtoms::minheight || aAttribute == nsGkAtoms::maxheight || aAttribute == nsGkAtoms::orient || aAttribute == nsGkAtoms::pack || aAttribute == nsGkAtoms::dir) { if (aAttribute == nsGkAtoms::align || aAttribute == nsGkAtoms::valign || aAttribute == nsGkAtoms::orient || aAttribute == nsGkAtoms::pack || aAttribute == nsGkAtoms::dir) { mValign = nsBoxFrame::vAlign_Top; mHalign = nsBoxFrame::hAlign_Left; bool orient = true; GetInitialOrientation(orient); if (orient) AddStateBits(NS_STATE_IS_HORIZONTAL); else RemoveStateBits(NS_STATE_IS_HORIZONTAL); bool normal = true; GetInitialDirection(normal); if (normal) AddStateBits(NS_STATE_IS_DIRECTION_NORMAL); else RemoveStateBits(NS_STATE_IS_DIRECTION_NORMAL); GetInitialVAlignment(mValign); GetInitialHAlignment(mHalign); bool autostretch = !!(mState & NS_STATE_AUTO_STRETCH); GetInitialAutoStretch(autostretch); if (autostretch) AddStateBits(NS_STATE_AUTO_STRETCH); else RemoveStateBits(NS_STATE_AUTO_STRETCH); } PresShell()->FrameNeedsReflow( this, IntrinsicDirty::FrameAncestorsAndDescendants, NS_FRAME_IS_DIRTY); } else if (aAttribute == nsGkAtoms::rows && mContent->IsXULElement(nsGkAtoms::tree)) { // Reflow ourselves and all our children if "rows" changes, since // nsTreeBodyFrame's layout reads this from its parent (this frame). PresShell()->FrameNeedsReflow( this, IntrinsicDirty::FrameAncestorsAndDescendants, NS_FRAME_IS_DIRTY); } return rv; } void nsBoxFrame::BuildDisplayList(nsDisplayListBuilder* aBuilder, const nsDisplayListSet& aLists) { nsDisplayListCollection tempLists(aBuilder); DisplayBorderBackgroundOutline(aBuilder, aLists); BuildDisplayListForChildren(aBuilder, aLists); // see if we have to draw a selection frame around this container DisplaySelectionOverlay(aBuilder, aLists.Content()); } void nsBoxFrame::BuildDisplayListForChildren(nsDisplayListBuilder* aBuilder, const nsDisplayListSet& aLists) { // Iterate over the children in CSS order. auto iter = CSSOrderAwareFrameIterator( this, FrameChildListID::Principal, CSSOrderAwareFrameIterator::ChildFilter::IncludeAll, CSSOrderAwareFrameIterator::OrderState::Unknown, CSSOrderAwareFrameIterator::OrderingProperty::BoxOrdinalGroup); // Put each child's background onto the BlockBorderBackgrounds list // to emulate the existing two-layer XUL painting scheme. nsDisplayListSet set(aLists, aLists.BlockBorderBackgrounds()); for (; !iter.AtEnd(); iter.Next()) { BuildDisplayListForChild(aBuilder, iter.get(), set); } } #ifdef DEBUG_FRAME_DUMP nsresult nsBoxFrame::GetFrameName(nsAString& aResult) const { return MakeFrameName(u"Box"_ns, aResult); } #endif nsresult nsBoxFrame::LayoutChildAt(nsBoxLayoutState& aState, nsIFrame* aBox, const nsRect& aRect) { // get the current rect nsRect oldRect(aBox->GetRect()); aBox->SetXULBounds(aState, aRect); bool layout = aBox->IsSubtreeDirty(); if (layout || (oldRect.width != aRect.width || oldRect.height != aRect.height)) { return aBox->XULLayout(aState); } return NS_OK; } namespace mozilla { /** * This wrapper class lets us redirect mouse hits from descendant frames * of a menu to the menu itself, if they didn't specify 'allowevents'. * * The wrapper simply turns a hit on a descendant element * into a hit on the menu itself, unless there is an element between the target * and the menu with the "allowevents" attribute. * * This is used by nsMenuFrame and nsTreeColFrame. * * Note that turning a hit on a descendant element into nullptr, so events * could fall through to the menu background, might be an appealing * simplification but it would mean slightly strange behaviour in some cases, * because grabber wrappers can be created for many individual lists and items, * so the exact fallthrough behaviour would be complex. E.g. an element with * "allowevents" on top of the Content() list could receive the event even if it * was covered by a PositionedDescenants() element without "allowevents". It is * best to never convert a non-null hit into null. */ // REVIEW: This is roughly of what nsMenuFrame::GetFrameForPoint used to do. // I've made 'allowevents' affect child elements because that seems the only // reasonable thing to do. class nsDisplayXULEventRedirector final : public nsDisplayWrapList { public: nsDisplayXULEventRedirector(nsDisplayListBuilder* aBuilder, nsIFrame* aFrame, nsDisplayItem* aItem, nsIFrame* aTargetFrame) : nsDisplayWrapList(aBuilder, aFrame, aItem), mTargetFrame(aTargetFrame) {} nsDisplayXULEventRedirector(nsDisplayListBuilder* aBuilder, nsIFrame* aFrame, nsDisplayList* aList, nsIFrame* aTargetFrame) : nsDisplayWrapList(aBuilder, aFrame, aList), mTargetFrame(aTargetFrame) {} virtual void HitTest(nsDisplayListBuilder* aBuilder, const nsRect& aRect, HitTestState* aState, nsTArray* aOutFrames) override; virtual bool ShouldFlattenAway(nsDisplayListBuilder* aBuilder) override { return false; } void Paint(nsDisplayListBuilder* aBuilder, gfxContext* aCtx) override { GetChildren()->Paint(aBuilder, aCtx, mFrame->PresContext()->AppUnitsPerDevPixel()); } NS_DISPLAY_DECL_NAME("XULEventRedirector", TYPE_XUL_EVENT_REDIRECTOR) private: nsIFrame* mTargetFrame; }; void nsDisplayXULEventRedirector::HitTest(nsDisplayListBuilder* aBuilder, const nsRect& aRect, HitTestState* aState, nsTArray* aOutFrames) { nsTArray outFrames; mList.HitTest(aBuilder, aRect, aState, &outFrames); bool topMostAdded = false; uint32_t localLength = outFrames.Length(); for (uint32_t i = 0; i < localLength; i++) { for (nsIContent* content = outFrames.ElementAt(i)->GetContent(); content && content != mTargetFrame->GetContent(); content = content->GetParent()) { if (!content->IsElement() || !content->AsElement()->AttrValueIs(kNameSpaceID_None, nsGkAtoms::allowevents, nsGkAtoms::_true, eCaseMatters)) { continue; } // Events are allowed on 'frame', so let it go. aOutFrames->AppendElement(outFrames.ElementAt(i)); topMostAdded = true; } // If there was no hit on the topmost frame or its ancestors, // add the target frame itself as the first candidate (see bug 562554). if (!topMostAdded) { topMostAdded = true; aOutFrames->AppendElement(mTargetFrame); } } } } // namespace mozilla class nsXULEventRedirectorWrapper final : public nsDisplayItemWrapper { public: explicit nsXULEventRedirectorWrapper(nsIFrame* aTargetFrame) : mTargetFrame(aTargetFrame) {} virtual nsDisplayItem* WrapList(nsDisplayListBuilder* aBuilder, nsIFrame* aFrame, nsDisplayList* aList) override { return MakeDisplayItem(aBuilder, aFrame, aList, mTargetFrame); } virtual nsDisplayItem* WrapItem(nsDisplayListBuilder* aBuilder, nsDisplayItem* aItem) override { return MakeDisplayItem( aBuilder, aItem->Frame(), aItem, mTargetFrame); } private: nsIFrame* mTargetFrame; }; void nsBoxFrame::WrapListsInRedirector(nsDisplayListBuilder* aBuilder, const nsDisplayListSet& aIn, const nsDisplayListSet& aOut) { nsXULEventRedirectorWrapper wrapper(this); wrapper.WrapLists(aBuilder, this, aIn, aOut); } bool nsBoxFrame::GetEventPoint(WidgetGUIEvent* aEvent, nsPoint& aPoint) { LayoutDeviceIntPoint refPoint; bool res = GetEventPoint(aEvent, refPoint); aPoint = nsLayoutUtils::GetEventCoordinatesRelativeTo(aEvent, refPoint, RelativeTo{this}); return res; } bool nsBoxFrame::GetEventPoint(WidgetGUIEvent* aEvent, LayoutDeviceIntPoint& aPoint) { NS_ENSURE_TRUE(aEvent, false); WidgetTouchEvent* touchEvent = aEvent->AsTouchEvent(); if (touchEvent) { // return false if there is more than one touch on the page, or if // we can't find a touch point if (touchEvent->mTouches.Length() != 1) { return false; } dom::Touch* touch = touchEvent->mTouches.SafeElementAt(0); if (!touch) { return false; } aPoint = touch->mRefPoint; } else { aPoint = aEvent->mRefPoint; } return true; }