/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ #include "nsIChannel.idl" interface nsIHttpHeaderVisitor; interface nsIReferrerInfo; %{C++ #include "GeckoProfiler.h" %} native UniqueProfileChunkedBuffer(mozilla::UniquePtr); /** * nsIHttpChannel * * This interface allows for the modification of HTTP request parameters and * the inspection of the resulting HTTP response status and headers when they * become available. */ [builtinclass, scriptable, uuid(c5a4a073-4539-49c7-a3f2-cec3f0619c6c)] interface nsIHttpChannel : nsIIdentChannel { /************************************************************************** * REQUEST CONFIGURATION * * Modifying request parameters after asyncOpen has been called is an error. */ /** * Set/get the HTTP request method (default is "GET"). Both setter and * getter are case sensitive. * * This attribute may only be set before the channel is opened. * * NOTE: The data for a "POST" or "PUT" request can be configured via * nsIUploadChannel; however, after setting the upload data, it may be * necessary to set the request method explicitly. The documentation * for nsIUploadChannel has further details. * * @throws NS_ERROR_IN_PROGRESS if set after the channel has been opened. */ [must_use] attribute ACString requestMethod; /** * Get/set the referrer information. This contains the referrer (URI) of the * resource from which this channel's URI was obtained (see RFC2616 section * 14.36) and the referrer policy applied to the referrer. * * This attribute may only be set before the channel is opened. * * Setting this attribute will clone new referrerInfo object by default. * * NOTE: The channel may silently refuse to set the Referer header if the * URI does not pass certain security checks (e.g., a "https://" URL will * never be sent as the referrer for a plaintext HTTP request). The * implementation is not required to throw an exception when the referrer * URI is rejected. * * @throws NS_ERROR_IN_PROGRESS if set after the channel has been opened. * @throws NS_ERROR_FAILURE if used for setting referrer during * visitRequestHeaders. Getting the value will not throw. */ [must_use, infallible] attribute nsIReferrerInfo referrerInfo; /** * Set referrer Info without clone new object. * Use this api only when you are passing a referrerInfo to the channel with * 1-1 relationship. Don't use this api if you will reuse the referrer info * object later. For example when to use: * channel.setReferrerInfoWithoutClone(new ReferrerInfo()); * */ [must_use, noscript] void setReferrerInfoWithoutClone(in nsIReferrerInfo aReferrerInfo); /** * Returns the network protocol used to fetch the resource as identified * by the ALPN Protocol ID. * * @throws NS_ERROR_NOT_AVAILABLE if called before the response * has been received (before onStartRequest). */ [must_use] readonly attribute ACString protocolVersion; /** * size consumed by the response header fields and the response payload body */ [must_use] readonly attribute uint64_t transferSize; /** * size consumed by the request header fields and the request payload body */ [must_use] readonly attribute uint64_t requestSize; /** * The size of the message body received by the client, * after removing any applied content-codings */ [must_use] readonly attribute uint64_t decodedBodySize; /** * The size in octets of the payload body, prior to removing content-codings */ [must_use] readonly attribute uint64_t encodedBodySize; /** * Get the value of a particular request header. * * @param aHeader * The case-insensitive name of the request header to query (e.g., * "Cache-Control"). * * @return the value of the request header. * @throws NS_ERROR_NOT_AVAILABLE if the header is not set. */ [must_use] ACString getRequestHeader(in ACString aHeader); /** * Set the value of a particular request header. * * This method allows, for example, the cookies module to add "Cookie" * headers to the outgoing HTTP request. * * This method may only be called before the channel is opened. * * @param aHeader * The case-insensitive name of the request header to set (e.g., * "Cookie"). * @param aValue * The request header value to set (e.g., "X=1"). * @param aMerge * If true, the new header value will be merged with any existing * values for the specified header. This flag is ignored if the * specified header does not support merging (e.g., the "Content- * Type" header can only have one value). The list of headers for * which this flag is ignored is an implementation detail. If this * flag is false, then the header value will be replaced with the * contents of |aValue|. * * If aValue is empty and aMerge is false, the header will be cleared. * * @throws NS_ERROR_IN_PROGRESS if called after the channel has been * opened. * @throws NS_ERROR_FAILURE if called during visitRequestHeaders. */ [must_use] void setRequestHeader(in ACString aHeader, in ACString aValue, in boolean aMerge); /** * Creates and sets new ReferrerInfo object * @param aUrl referrer url * @param aPolicy referrer policy of the created object * @param aSendReferrer indicates if the referrer should not be sent or not * even when it's available. */ [must_use] void setNewReferrerInfo(in ACString aUrl, in nsIReferrerInfo_ReferrerPolicyIDL aPolicy, in boolean aSendReferrer); /** * Set a request header with empty value. * * This should be used with caution in the cases where the behavior of * setRequestHeader ignoring empty header values is undesirable. * * This method may only be called before the channel is opened. * * @param aHeader * The case-insensitive name of the request header to set (e.g., * "Cookie"). * * @throws NS_ERROR_IN_PROGRESS if called after the channel has been * opened. * @throws NS_ERROR_FAILURE if called during visitRequestHeaders. */ [must_use] void setEmptyRequestHeader(in ACString aHeader); /** * Call this method to visit all request headers. Calling setRequestHeader * while visiting request headers has undefined behavior. Don't do it! * * @param aVisitor * the header visitor instance. */ [must_use] void visitRequestHeaders(in nsIHttpHeaderVisitor aVisitor); /** * Call this method to visit all non-default (UA-provided) request headers. * Calling setRequestHeader while visiting request headers has undefined * behavior. Don't do it! * * @param aVisitor * the header visitor instance. */ [must_use] void visitNonDefaultRequestHeaders(in nsIHttpHeaderVisitor aVisitor); /** * Call this method to see if we need to strip the request body headers * for the new http channel. This should be called during redirection. */ [must_use] bool ShouldStripRequestBodyHeader(in ACString aMethod); /** * This attribute of the channel indicates whether or not * the underlying HTTP transaction should be honor stored Strict Transport * Security directives for its principal. It defaults to true. Using * OCSP to bootstrap the HTTPs is the likely use case for setting it to * false. * * This attribute may only be set before the channel is opened. * * @throws NS_ERROR_IN_PROGRESS or NS_ERROR_ALREADY_OPENED * if called after the channel has been opened. */ [must_use] attribute boolean allowSTS; /** * This attribute specifies the number of redirects this channel is allowed * to make. If zero, the channel will fail to redirect and will generate * a NS_ERROR_REDIRECT_LOOP failure status. * * NOTE: An HTTP redirect results in a new channel being created. If the * new channel supports nsIHttpChannel, then it will be assigned a value * to its |redirectionLimit| attribute one less than the value of the * redirected channel's |redirectionLimit| attribute. The initial value * for this attribute may be a configurable preference (depending on the * implementation). */ [must_use] attribute unsigned long redirectionLimit; /************************************************************************** * RESPONSE INFO * * Accessing response info before the onStartRequest event is an error. */ /** * Get the HTTP response code (e.g., 200). * * @throws NS_ERROR_NOT_AVAILABLE if called before the response * has been received (before onStartRequest). */ [must_use] readonly attribute unsigned long responseStatus; /** * Get the HTTP response status text (e.g., "OK"). * * NOTE: This returns the raw (possibly 8-bit) text from the server. There * are no assumptions made about the charset of the returned text. You * have been warned! * * @throws NS_ERROR_NOT_AVAILABLE if called before the response * has been received (before onStartRequest). */ [must_use] readonly attribute ACString responseStatusText; /** * Returns true if the HTTP response code indicates success. The value of * nsIRequest::status will be NS_OK even when processing a 404 response * because a 404 response may include a message body that (in some cases) * should be shown to the user. * * Use this attribute to distinguish server error pages from normal pages, * instead of comparing the response status manually against the set of * valid response codes, if that is required by your application. * * @throws NS_ERROR_NOT_AVAILABLE if called before the response * has been received (before onStartRequest). */ [must_use] readonly attribute boolean requestSucceeded; /** Indicates whether channel should be treated as the main one for the * current document. If manually set to true, will always remain true. Otherwise, * will be true if LOAD_DOCUMENT_URI is set in the channel's loadflags. */ [must_use] attribute boolean isMainDocumentChannel; /** * Get the value of a particular response header. * * @param aHeader * The case-insensitive name of the response header to query (e.g., * "Set-Cookie"). * * @return the value of the response header. * * @throws NS_ERROR_NOT_AVAILABLE if called before the response * has been received (before onStartRequest) or if the header is * not set in the response. */ [must_use] ACString getResponseHeader(in ACString header); /** * Set the value of a particular response header. * * This method allows, for example, the HTML content sink to inform the HTTP * channel about HTTP-EQUIV headers found in HTML tags. * * @param aHeader * The case-insensitive name of the response header to set (e.g., * "Cache-control"). * @param aValue * The response header value to set (e.g., "no-cache"). * @param aMerge * If true, the new header value will be merged with any existing * values for the specified header. This flag is ignored if the * specified header does not support merging (e.g., the "Content- * Type" header can only have one value). The list of headers for * which this flag is ignored is an implementation detail. If this * flag is false, then the header value will be replaced with the * contents of |aValue|. * * If aValue is empty and aMerge is false, the header will be cleared. * * @throws NS_ERROR_NOT_AVAILABLE if called before the response * has been received (before onStartRequest). * @throws NS_ERROR_ILLEGAL_VALUE if changing the value of this response * header is not allowed. * @throws NS_ERROR_FAILURE if called during visitResponseHeaders, * VisitOriginalResponseHeaders or getOriginalResponseHeader. */ [must_use] void setResponseHeader(in ACString header, in ACString value, in boolean merge); /** * Call this method to visit all response headers. Calling * setResponseHeader while visiting response headers has undefined * behavior. Don't do it! * * @param aVisitor * the header visitor instance. * * @throws NS_ERROR_NOT_AVAILABLE if called before the response * has been received (before onStartRequest). */ [must_use] void visitResponseHeaders(in nsIHttpHeaderVisitor aVisitor); /** * Get the value(s) of a particular response header in the form and order * it has been received from the remote peer. There can be multiple headers * with the same name. * * @param aHeader * The case-insensitive name of the response header to query (e.g., * "Set-Cookie"). * * @param aVisitor * the header visitor instance. * * @throws NS_ERROR_NOT_AVAILABLE if called before the response * has been received (before onStartRequest) or if the header is * not set in the response. */ [must_use] void getOriginalResponseHeader(in ACString aHeader, in nsIHttpHeaderVisitor aVisitor); /** * Call this method to visit all response headers in the form and order as * they have been received from the remote peer. * Calling setResponseHeader while visiting response headers has undefined * behavior. Don't do it! * * @param aVisitor * the header visitor instance. * * @throws NS_ERROR_NOT_AVAILABLE if called before the response * has been received (before onStartRequest). */ [must_use] void visitOriginalResponseHeaders(in nsIHttpHeaderVisitor aVisitor); /** * Returns true if the server sent a "Cache-Control: no-store" response * header. * * @throws NS_ERROR_NOT_AVAILABLE if called before the response * has been received (before onStartRequest). */ [must_use] boolean isNoStoreResponse(); /** * Returns true if the server sent the equivalent of a "Cache-control: * no-cache" response header. Equivalent response headers include: * "Pragma: no-cache", "Expires: 0", and "Expires" with a date value * in the past relative to the value of the "Date" header. * * @throws NS_ERROR_NOT_AVAILABLE if called before the response * has been received (before onStartRequest). */ [must_use] boolean isNoCacheResponse(); /** * Returns true if the server sent a "Cache-Control: private" response * header. * * @throws NS_ERROR_NOT_AVAILABLE if called before the response * has been received (before onStartRequest). */ [must_use] boolean isPrivateResponse(); /** * Instructs the channel to immediately redirect to a new destination. * Can only be called on channels that have not yet called their * listener's OnStartRequest(). Generally that means the latest time * this can be used is one of: * "http-on-examine-response" * "http-on-examine-merged-response" * "http-on-examine-cached-response" * * When non-null URL is set before AsyncOpen: * we attempt to redirect to the targetURI before we even start building * and sending the request to the cache or the origin server. * If the redirect is vetoed, we fail the channel. * * When set between AsyncOpen and first call to OnStartRequest being called: * we attempt to redirect before we start delivery of network or cached * response to the listener. If vetoed, we continue with delivery of * the original content to the channel listener. * * When passed aTargetURI is null the channel behaves normally (can be * rewritten). * * This method provides no explicit conflict resolution. The last * caller to call it wins. * * @throws NS_ERROR_NOT_AVAILABLE if called after the channel has already * started to deliver the content to its listener. */ [must_use] void redirectTo(in nsIURI aTargetURI); /** * Flags a channel to be upgraded to HTTPS. * * Upgrading to a secure channel must happen before or during * "http-on-modify-request". If redirectTo is called early as well, it * will win and upgradeToSecure will be a no-op. * * @throws NS_ERROR_NOT_AVAILABLE if called after the channel has already * started to deliver the content to its listener. */ [must_use] void upgradeToSecure(); /** * Identifies the request context for this load. */ [noscript, must_use] attribute uint64_t requestContextID; /** * ID of the top-level document's inner window. Identifies the content * this channels is being load in. */ [must_use] attribute uint64_t topLevelContentWindowId; /** * ID of the top-level browsing context for this channel. * * NOTE: The setter of this attribute is currently for xpcshell test only. * Don't alter it otherwise. */ [must_use] attribute uint64_t topBrowsingContextId; /** * In e10s, the information that the CORS response blocks the load is in the * parent, which doesn't know the true window id of the request, so we may * need to proxy the request to the child. * * @param aMessage * The message to print in the console. * * @param aCategory * The category under which the message should be displayed. */ void logBlockedCORSRequest(in AString aMessage, in ACString aCategory); void logMimeTypeMismatch(in ACString aMessageName, in boolean aWarning, in AString aURL, in AString aContentType); [notxpcom, nostdcall] void setSource(in UniqueProfileChunkedBuffer aSource); };