Adding upstream version 2.10.34.upstream/2.10.34upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1177 insertions, 0 deletions

diff --git a/etc/gimprc.in b/etc/gimprc.in
new file mode 100644
index 0000000..bdf8f0c
--- /dev/null
+++ b/etc/gimprc.in
@@ -0,0 +1,1177 @@
+# This is the system-wide gimprc file.  Any change made in this file will
+# affect all users of this system, provided that they are not overriding the
+# default values in their personal gimprc file.
+# 
+# Lines that start with a '#' are comments. Blank lines are ignored.
+# 
+# By default everything in this file is commented out.  The file then
+# documents the default values and shows what changes are possible.
+# 
+# The variable ${gimp_dir} is set to the value of the environment variable
+# GIMP2_DIRECTORY or, if that is not set, the compiled-in default value is
+# used.  If GIMP2_DIRECTORY is not an absolute path, it is interpreted
+# relative to your home directory.
+
+# Sets the folder for temporary storage. Files will appear here during the
+# course of running GIMP.  Most files will disappear when GIMP exits, but
+# some files are likely to remain, so it is best if this folder not be one
+# that is shared by other users.  This is a single folder.
+# 
+# (temp-path "${gimp_temp_dir}")
+
+# Sets the swap file location. GIMP uses a tile based memory allocation
+# scheme. The swap file is used to quickly and easily swap tiles out to disk
+# and back in. Be aware that the swap file can easily get very large if GIMP
+# is used with large images. Also, things can get horribly slow if the swap
+# file is created on a folder that is mounted over NFS.  For these reasons,
+# it may be desirable to put your swap file in "/tmp".  This is a single
+# folder.
+# 
+# (swap-path "${gimp_cache_dir}")
+
+# The compression method used for tile data stored in the swap file.  This is
+# a string value.
+# 
+# (swap-compression "fast")
+
+# Sets how many threads GIMP should use for operations that support it.  This
+# is an integer value.
+# 
+# (num-processors 1)
+
+# When the amount of pixel data exceeds this limit, GIMP will start to swap
+# tiles to disk.  This is a lot slower but it makes it possible to work on
+# images that wouldn't fit into memory otherwise.  If you have a lot of RAM,
+# you may want to set this to a higher value.  The integer size can contain a
+# suffix of 'B', 'K', 'M' or 'G' which makes GIMP interpret the size as being
+# specified in bytes, kilobytes, megabytes or gigabytes. If no suffix is
+# specified the size defaults to being specified in kilobytes.
+# 
+# (tile-cache-size 2g)
+
+# When enabled, uses OpenCL for some operations.  Possible values are yes and
+# no.
+# 
+# (use-opencl no)
+
+# Specifies the language to use for the user interface.  This is a string
+# value.
+# 
+# 
+
+# Sets the level of interpolation used for scaling and other transformations.
+#  Possible values are none, linear, cubic, nohalo and lohalo.
+# 
+# (interpolation-type cubic)
+
+# Tools such as fuzzy-select and bucket fill find regions based on a
+# seed-fill algorithm.  The seed fill starts at the initially selected pixel
+# and progresses in all directions until the difference of pixel intensity
+# from the original is greater than a specified threshold. This value
+# represents the default threshold.  This is an integer value.
+# 
+# (default-threshold 15)
+
+# Sets the plug-in search path.  This is a colon-separated list of folders to
+# search.
+# 
+# (plug-in-path "${gimp_dir}/plug-ins:${gimp_plug_in_dir}/plug-ins")
+
+# Sets the module search path.  This is a colon-separated list of folders to
+# search.
+# 
+# (module-path "${gimp_dir}/modules:${gimp_plug_in_dir}/modules")
+
+# Sets the interpreter search path.  This is a colon-separated list of
+# folders to search.
+# 
+# (interpreter-path "${gimp_dir}/interpreters:${gimp_plug_in_dir}/interpreters")
+
+# Sets the environ search path.  This is a colon-separated list of folders to
+# search.
+# 
+# (environ-path "${gimp_dir}/environ:${gimp_plug_in_dir}/environ")
+
+# Sets the brush search path.  This is a colon-separated list of folders to
+# search.
+# 
+# (brush-path "${gimp_dir}/brushes:${gimp_data_dir}/brushes")
+
+# This is a colon-separated list of folders to search.
+# 
+# (brush-path-writable "${gimp_dir}/brushes")
+
+# Sets the dynamics search path.  This is a colon-separated list of folders
+# to search.
+# 
+# (dynamics-path "${gimp_dir}/dynamics:${gimp_data_dir}/dynamics")
+
+# This is a colon-separated list of folders to search.
+# 
+# (dynamics-path-writable "${gimp_dir}/dynamics")
+
+# Sets the brush search path.  This is a colon-separated list of folders to
+# search.
+# 
+# (mypaint-brush-path "@mypaint_brushes_dir@:~/.mypaint/brushes")
+
+# This is a colon-separated list of folders to search.
+# 
+# (mypaint-brush-path-writable "~/.mypaint/brushes")
+
+# Sets the pattern search path.  This is a colon-separated list of folders to
+# search.
+# 
+# (pattern-path "${gimp_dir}/patterns:${gimp_data_dir}/patterns")
+
+# This is a colon-separated list of folders to search.
+# 
+# (pattern-path-writable "${gimp_dir}/patterns")
+
+# Sets the palette search path.  This is a colon-separated list of folders to
+# search.
+# 
+# (palette-path "${gimp_dir}/palettes:${gimp_data_dir}/palettes")
+
+# This is a colon-separated list of folders to search.
+# 
+# (palette-path-writable "${gimp_dir}/palettes")
+
+# Sets the gradient search path.  This is a colon-separated list of folders
+# to search.
+# 
+# (gradient-path "${gimp_dir}/gradients:${gimp_data_dir}/gradients")
+
+# This is a colon-separated list of folders to search.
+# 
+# (gradient-path-writable "${gimp_dir}/gradients")
+
+# Sets the dynamics search path.  This is a colon-separated list of folders
+# to search.
+# 
+# (tool-preset-path "${gimp_dir}/tool-presets:${gimp_data_dir}/tool-presets")
+
+# This is a colon-separated list of folders to search.
+# 
+# (tool-preset-path-writable "${gimp_dir}/tool-presets")
+
+# Where to look for fonts in addition to the system-wide installed fonts. 
+# This is a colon-separated list of folders to search.
+# 
+# (font-path "${gimp_dir}/fonts:${gimp_data_dir}/fonts")
+
+# Specify a default brush.  The brush is searched for in the specified brush
+# path.  This is a string value.
+# 
+# (default-brush "2. Hardness 050")
+
+# Specify a default dynamics.  The dynamics is searched for in the specified
+# dynamics path.  This is a string value.
+# 
+# (default-dynamics "Dynamics Off")
+
+# Specify a default MyPaint brush.  This is a string value.
+# 
+# (default-mypaint-brush "Fixme")
+
+# Specify a default pattern.  This is a string value.
+# 
+# (default-pattern "Pine")
+
+# Specify a default palette.  This is a string value.
+# 
+# (default-palette "Default")
+
+# Specify a default gradient.  This is a string value.
+# 
+# (default-gradient "FG to BG (RGB)")
+
+# Specify a default tool preset.  The tool preset is searched for in the
+# specified tool prests path.  This is a string value.
+# 
+# (default-tool-preset "Current Options")
+
+# Specify a default font.  This is a string value.
+# 
+# (default-font "Sans-serif")
+
+# When enabled, the selected brush will be used for all tools.  Possible
+# values are yes and no.
+# 
+# (global-brush yes)
+
+# When enabled, the selected dynamics will be used for all tools.  Possible
+# values are yes and no.
+# 
+# (global-dynamics yes)
+
+# When enabled, the selected pattern will be used for all tools.  Possible
+# values are yes and no.
+# 
+# (global-pattern yes)
+
+# When enabled, the selected palette will be used for all tools.  Possible
+# values are yes and no.
+# 
+# (global-palette yes)
+
+# When enabled, the selected gradient will be used for all tools.  Possible
+# values are yes and no.
+# 
+# (global-gradient yes)
+
+# When enabled, the selected font will be used for all tools.  Possible
+# values are yes and no.
+# 
+# (global-font yes)
+
+# Sets the default image in the "File/New" dialog.  This is a parameter list.
+# 
+# (default-image
+#     (width 1920)
+#     (height 1080)
+#     (unit pixels)
+#     (xresolution 300)
+#     (yresolution 300)
+#     (resolution-unit inches)
+#     (image-type rgb)
+#     (precision u8-gamma)
+#     (color-managed yes)
+#     (color-profile NULL)
+#     (fill-type background)
+#     (comment "Created with GIMP"))
+
+# Specify a default image grid.  This is a parameter list.
+# 
+# (default-grid
+#     (style solid)
+#     (fgcolor (color-rgba 0 0 0 1))
+#     (bgcolor (color-rgba 1 1 1 1))
+#     (xspacing 10)
+#     (yspacing 10)
+#     (spacing-unit inches)
+#     (xoffset 0)
+#     (yoffset 0)
+#     (offset-unit inches))
+
+# Sets the minimal number of operations that can be undone. More undo levels
+# are kept available until the undo-size limit is reached.  This is an
+# integer value.
+# 
+# (undo-levels 5)
+
+# Sets an upper limit to the memory that is used per image to keep operations
+# on the undo stack. Regardless of this setting, at least as many undo-levels
+# as configured can be undone.  The integer size can contain a suffix of 'B',
+# 'K', 'M' or 'G' which makes GIMP interpret the size as being specified in
+# bytes, kilobytes, megabytes or gigabytes. If no suffix is specified the
+# size defaults to being specified in kilobytes.
+# 
+# (undo-size 1g)
+
+# Sets the size of the previews in the Undo History.  Possible values are
+# tiny, extra-small, small, medium, large, extra-large, huge, enormous and
+# gigantic.
+# 
+# (undo-preview-size large)
+
+# How many recently used filters and plug-ins to keep on the Filters menu. 
+# This is an integer value.
+# 
+# (plug-in-history-size 10)
+
+# Sets the pluginrc search path.  This is a single filename.
+# 
+# (pluginrc-path "${gimp_dir}/pluginrc")
+
+# Sets whether GIMP should create previews of layers and channels. Previews
+# in the layers and channels dialog are nice to have but they can slow things
+# down when working with large images.  Possible values are yes and no.
+# 
+# (layer-previews yes)
+
+# Sets whether GIMP should create previews of layer groups. Layer group
+# previews are more expensive than ordinary layer previews.  Possible values
+# are yes and no.
+# 
+# (group-layer-previews yes)
+
+# Sets the preview size used for layers and channel previews in newly created
+# dialogs.  Possible values are tiny, extra-small, small, medium, large,
+# extra-large, huge, enormous and gigantic.
+# 
+# (layer-preview-size medium)
+
+# Sets the size of the thumbnail shown in the Open dialog.  Possible values
+# are none, normal and large.
+# 
+# (thumbnail-size normal)
+
+# The thumbnail in the Open dialog will be automatically updated if the file
+# being previewed is smaller than the size set here.  The integer size can
+# contain a suffix of 'B', 'K', 'M' or 'G' which makes GIMP interpret the
+# size as being specified in bytes, kilobytes, megabytes or gigabytes. If no
+# suffix is specified the size defaults to being specified in kilobytes.
+# 
+# (thumbnail-filesize-limit 4M)
+
+# Defines the color management behavior.  This is a parameter list.
+# 
+# (color-management
+#     (mode display)
+#     (display-profile-from-gdk no)
+#     (display-rendering-intent relative-colorimetric)
+#     (display-use-black-point-compensation yes)
+#     (display-optimize yes)
+#     (simulation-rendering-intent perceptual)
+#     (simulation-use-black-point-compensation no)
+#     (simulation-optimize yes)
+#     (simulation-gamut-check no)
+#     (out-of-gamut-color (color-rgb 1 0 1))
+#     (show-rgb-u8 no)
+#     (show-hsv no)
+#     (display-module "CdisplayLcms"))
+
+# Keep a permanent record of all opened and saved files in the Recent
+# Documents list.  Possible values are yes and no.
+# 
+# (save-document-history yes)
+
+# Sets the default quick mask color.  The color is specified in the form
+# (color-rgba red green blue alpha) with channel values as floats in the
+# range of 0.0 to 1.0.
+# 
+# (quick-mask-color (color-rgba 1 0 0 0.5))
+
+# Promote imported images to floating point precision. Does not apply to
+# indexed images.  Possible values are yes and no.
+# 
+# (import-promote-float no)
+
+# When promoting imported images to floating point precision, also add
+# minimal noise in order to distribute color values a bit.  Possible values
+# are yes and no.
+# 
+# (import-promote-dither yes)
+
+# Add an alpha channel to all layers of imported images.  Possible values are
+# yes and no.
+# 
+# (import-add-alpha no)
+
+# Which plug-in to use for importing raw digital camera files.  This is a
+# single filename.
+# 
+# (import-raw-plug-in "")
+
+# Export file type used by default.  Possible values are png, jpg, ora, psd,
+# pdf, tif, bmp and webp.
+# 
+# (export-file-type png)
+
+# Export the image's color profile by default.  Possible values are yes and
+# no.
+# 
+# (export-color-profile yes)
+
+# Export Exif metadata by default.  Possible values are yes and no.
+# 
+# (export-metadata-exif yes)
+
+# Export XMP metadata by default.  Possible values are yes and no.
+# 
+# (export-metadata-xmp yes)
+
+# Export IPTC metadata by default.  Possible values are yes and no.
+# 
+# (export-metadata-iptc yes)
+
+# Try generating debug data for bug reporting when appropriate.  Possible
+# values are warning, critical, fatal and never.
+# 
+# (debug-policy fatal)
+
+# Check for availability of GIMP updates through background internet queries.
+#  Possible values are yes and no.
+# 
+# (check-updates yes)
+
+# Timestamp of the last update check.  (null)
+# 
+# (check-update-timestamp 0)
+
+# The timestamp for the last known release date.  (null)
+# 
+# (last-release-timestamp 0)
+
+# The last known release version of GIMP as queried from official website. 
+# This is a string value.
+# 
+# 
+
+# The timestamp for the last known release date.  This is an integer value.
+# 
+# (last-revision 0)
+
+# The last known release version of GIMP as queried from official website. 
+# This is a string value.
+# 
+# 
+
+# Sets the size of the checkerboard used to display transparency.  Possible
+# values are small-checks, medium-checks and large-checks.
+# 
+# (transparency-size medium-checks)
+
+# Sets the manner in which transparency is displayed in images.  Possible
+# values are light-checks, gray-checks, dark-checks, white-only, gray-only
+# and black-only.
+# 
+# (transparency-type gray-checks)
+
+# This is the distance in pixels where Guide and Grid snapping activates. 
+# This is an integer value.
+# 
+# (snap-distance 8)
+
+# Speed of marching ants in the selection outline.  This value is in
+# milliseconds (less time indicates faster marching).  This is an integer
+# value.
+# 
+# (marching-ants-speed 200)
+
+# When enabled, the image window will automatically resize itself when
+# zooming into and out of images. This setting only takes effect in
+# multi-window mode.  Possible values are yes and no.
+# 
+# (resize-windows-on-zoom no)
+
+# When enabled, the image window will automatically resize itself whenever
+# the physical image size changes. This setting only takes effect in
+# multi-window mode.  Possible values are yes and no.
+# 
+# (resize-windows-on-resize no)
+
+# Show full image content by default.  Possible values are yes and no.
+# 
+# (default-show-all no)
+
+# When enabled, this will ensure that each pixel of an image gets mapped to a
+# pixel on the screen.  Possible values are yes and no.
+# 
+# (default-dot-for-dot yes)
+
+# When enabled, this will ensure that the full image is visible after a file
+# is opened, otherwise it will be displayed with a scale of 1:1.  Possible
+# values are yes and no.
+# 
+# (initial-zoom-to-fit yes)
+
+# Sets the type of mouse pointers to use.  Possible values are tool-icon,
+# tool-crosshair and crosshair.
+# 
+# (cursor-mode tool-crosshair)
+
+# Context-dependent mouse pointers are helpful.  They are enabled by default.
+#  However, they require overhead that you may want to do without.  Possible
+# values are yes and no.
+# 
+# (cursor-updating yes)
+
+# When enabled, all paint tools will show a preview of the current brush's
+# outline.  Possible values are yes and no.
+# 
+# (show-brush-outline yes)
+
+# When enabled, the brush outline will snap to individual dabs while
+# painting.  Possible values are yes and no.
+# 
+# (snap-brush-outline no)
+
+# When enabled, the mouse pointer will be shown over the image while using a
+# paint tool.  Possible values are yes and no.
+# 
+# (show-paint-tool-cursor yes)
+
+# Sets the text to appear in image window titles.  This is a format string;
+# certain % character sequences are recognised and expanded as follows:
+# 
+# %%  literal percent sign
+# %f  bare filename, or "Untitled"
+# %F  full path to file, or "Untitled"
+# %p  PDB image id
+# %i  view instance number
+# %t  image type (RGB, grayscale, indexed)
+# %z  zoom factor as a percentage
+# %s  source scale factor
+# %d  destination scale factor
+# %Dx expands to x if the image is dirty, the empty string otherwise
+# %Cx expands to x if the image is clean, the empty string otherwise
+# %B  expands to (modified) if the image is dirty, the empty string otherwise
+# %A  expands to (clean) if the image is clean, the empty string otherwise
+# %Nx expands to x if the image is export-dirty, the empty string otherwise
+# %Ex expands to x if the image is export-clean, the empty string otherwise
+# %l  the number of layers
+# %L  the number of layers (long form)
+# %m  memory used by the image
+# %n  the name of the active layer/channel
+# %P  the PDB id of the active layer/channel
+# %w  image width in pixels
+# %W  image width in real-world units
+# %h  image height in pixels
+# %H  image height in real-world units
+# %M  the image size expressed in megapixels
+# %u  unit symbol
+# %U  unit abbreviation
+# %x  the width of the active layer/channel in pixels
+# %X  the width of the active layer/channel in real-world units
+# %y  the height of the active layer/channel in pixels
+# %Y  the height of the active layer/channel in real-world units
+# %o  the name of the image's color profile
+# 
+# 
+# (image-title-format "%D*%f-%p.%i (%t, %o, %L) %wx%h")
+
+# Sets the text to appear in image window status bars.  This is a format
+# string; certain % character sequences are recognised and expanded as
+# follows:
+# 
+# %%  literal percent sign
+# %f  bare filename, or "Untitled"
+# %F  full path to file, or "Untitled"
+# %p  PDB image id
+# %i  view instance number
+# %t  image type (RGB, grayscale, indexed)
+# %z  zoom factor as a percentage
+# %s  source scale factor
+# %d  destination scale factor
+# %Dx expands to x if the image is dirty, the empty string otherwise
+# %Cx expands to x if the image is clean, the empty string otherwise
+# %B  expands to (modified) if the image is dirty, the empty string otherwise
+# %A  expands to (clean) if the image is clean, the empty string otherwise
+# %Nx expands to x if the image is export-dirty, the empty string otherwise
+# %Ex expands to x if the image is export-clean, the empty string otherwise
+# %l  the number of layers
+# %L  the number of layers (long form)
+# %m  memory used by the image
+# %n  the name of the active layer/channel
+# %P  the PDB id of the active layer/channel
+# %w  image width in pixels
+# %W  image width in real-world units
+# %h  image height in pixels
+# %H  image height in real-world units
+# %M  the image size expressed in megapixels
+# %u  unit symbol
+# %U  unit abbreviation
+# %x  the width of the active layer/channel in pixels
+# %X  the width of the active layer/channel in real-world units
+# %y  the height of the active layer/channel in pixels
+# %Y  the height of the active layer/channel in real-world units
+# %o  the name of the image's color profile
+# 
+# 
+# (image-status-format "%n (%m)")
+
+# Sets the monitor's horizontal resolution, in dots per inch.  If set to 0,
+# forces the X server to be queried for both horizontal and vertical
+# resolution information.  This is a float value.
+# 
+# (monitor-xresolution 96)
+
+# Sets the monitor's vertical resolution, in dots per inch.  If set to 0,
+# forces the X server to be queried for both horizontal and vertical
+# resolution information.  This is a float value.
+# 
+# (monitor-yresolution 96)
+
+# When enabled, GIMP will use the monitor resolution from the windowing
+# system.  Possible values are yes and no.
+# 
+# (monitor-resolution-from-windowing-system yes)
+
+# Sets the size of the navigation preview available in the lower right corner
+# of the image window.  Possible values are tiny, extra-small, small, medium,
+# large, extra-large, huge, enormous and gigantic.
+# 
+# (navigation-preview-size medium)
+
+# Sets the default settings for the image view.  This is a parameter list.
+# 
+# (default-view
+#     (show-menubar yes)
+#     (show-statusbar yes)
+#     (show-rulers yes)
+#     (show-scrollbars yes)
+#     (show-selection yes)
+#     (show-layer-boundary yes)
+#     (show-canvas-boundary yes)
+#     (show-guides yes)
+#     (show-grid no)
+#     (show-sample-points yes)
+#     (snap-to-guides yes)
+#     (snap-to-grid no)
+#     (snap-to-canvas no)
+#     (snap-to-path no)
+#     (padding-mode default)
+#     (padding-color (color-rgb 1 1 1))
+#     (padding-in-show-all no))
+
+# Sets the default settings used when an image is viewed in fullscreen mode. 
+# This is a parameter list.
+# 
+# (default-fullscreen-view
+#     (show-menubar yes)
+#     (show-statusbar yes)
+#     (show-rulers yes)
+#     (show-scrollbars yes)
+#     (show-selection yes)
+#     (show-layer-boundary yes)
+#     (show-canvas-boundary yes)
+#     (show-guides yes)
+#     (show-grid no)
+#     (show-sample-points yes)
+#     (snap-to-guides yes)
+#     (snap-to-grid no)
+#     (snap-to-canvas no)
+#     (snap-to-path no)
+#     (padding-mode default)
+#     (padding-color (color-rgb 1 1 1))
+#     (padding-in-show-all no))
+
+# When enabled, an image will become the active image when its image window
+# receives the focus. This is useful for window managers using "click to
+# focus".  Possible values are yes and no.
+# 
+# (activate-on-focus yes)
+
+# What to do when the space bar is pressed in the image window.  Possible
+# values are none, pan and move.
+# 
+# (space-bar-action pan)
+
+# There's a tradeoff between speed and quality of the zoomed-out display. 
+# Possible values are low and high.
+# 
+# (zoom-quality high)
+
+# Bugs in event history buffer are frequent so in case of cursor offset
+# problems turning it off helps.  Possible values are yes and no.
+# 
+# (use-event-history no)
+
+# When enabled, non-visible layers can be edited as normal.  Possible values
+# are yes and no.
+# 
+# (edit-non-visible no)
+
+# If enabled, the move tool sets the edited layer or path as active.  This
+# used to be the default behaviour in older versions.  Possible values are
+# yes and no.
+# 
+# (move-tool-changes-active no)
+
+# How many recent settings to keep around in filter tools.  This is an
+# integer value.
+# 
+# (filter-tool-max-recent 10)
+
+# Default to the last used settings in filter tools.  Possible values are yes
+# and no.
+# 
+# (filter-tool-use-last-settings no)
+
+# Show advanced color options in filter tools.  Possible values are yes and
+# no.
+# 
+# (filter-tool-show-color-options no)
+
+# When enabled, GIMP will not save an image if it has not been changed since
+# it was opened.  Possible values are yes and no.
+# 
+# (trust-dirty-flag no)
+
+# Remember the current tool, pattern, color, and brush across GIMP sessions. 
+# Possible values are yes and no.
+# 
+# (save-device-status yes)
+
+# When enabled, the same tool and tool options will be used for all input
+# devices. No tool switching will occur when the input device changes. 
+# Possible values are yes and no.
+# 
+# (devices-share-tool no)
+
+# Save the positions and sizes of the main dialogs when GIMP exits.  Possible
+# values are yes and no.
+# 
+# (save-session-info yes)
+
+# Let GIMP try to restore your last saved session on each startup.  Possible
+# values are yes and no.
+# 
+# (restore-session yes)
+
+# When enabled, GIMP will try to restore windows on the monitor they were
+# open before.  When disabled, windows will appear on the currently used
+# monitor.  Possible values are yes and no.
+# 
+# (restore-monitor no)
+
+# Save the tool options when GIMP exits.  Possible values are yes and no.
+# 
+# (save-tool-options yes)
+
+# Use compact style for sliders.  Possible values are yes and no.
+# 
+# (compact-sliders yes)
+
+# Show a tooltip when the pointer hovers over an item.  Possible values are
+# yes and no.
+# 
+# (show-tooltips yes)
+
+# When enabled, menus can be torn off.  Possible values are yes and no.
+# 
+# (tearoff-menus yes)
+
+# When enabled, you can change keyboard shortcuts for menu items by hitting a
+# key combination while the menu item is highlighted.  Possible values are
+# yes and no.
+# 
+# (can-change-accels no)
+
+# Save changed keyboard shortcuts when GIMP exits.  Possible values are yes
+# and no.
+# 
+# (save-accels yes)
+
+# Restore saved keyboard shortcuts on each GIMP startup.  Possible values are
+# yes and no.
+# 
+# (restore-accels yes)
+
+# How many recently opened image filenames to keep on the File menu.  This is
+# an integer value.
+# 
+# (last-opened-size 10)
+
+# GIMP will warn the user if an attempt is made to create an image that would
+# take more memory than the size specified here.  The integer size can
+# contain a suffix of 'B', 'K', 'M' or 'G' which makes GIMP interpret the
+# size as being specified in bytes, kilobytes, megabytes or gigabytes. If no
+# suffix is specified the size defaults to being specified in kilobytes.
+# 
+# (max-new-image-size 128M)
+
+# Show the current foreground and background colors in the toolbox.  Possible
+# values are yes and no.
+# 
+# (toolbox-color-area yes)
+
+# Show the currently selected brush, pattern and gradient in the toolbox. 
+# Possible values are yes and no.
+# 
+# (toolbox-foo-area no)
+
+# Show the currently active image in the toolbox.  Possible values are yes
+# and no.
+# 
+# (toolbox-image-area no)
+
+# Show the GIMP mascot at the top of the toolbox.  Possible values are yes
+# and no.
+# 
+# (toolbox-wilber yes)
+
+# Use a single toolbox button for grouped tools.  Possible values are yes and
+# no.
+# 
+# (toolbox-groups yes)
+
+# Menu mode of grouped tools.  Possible values are click, hover and
+# hover-single-column.
+# 
+# (toolbox-group-menu-mode hover-single-column)
+
+# Sets the theme search path.  This is a colon-separated list of folders to
+# search.
+# 
+# (theme-path "${gimp_dir}/themes:${gimp_data_dir}/themes")
+
+# The name of the theme to use.  This is a string value.
+# 
+# (theme "Dark")
+
+# Sets the icon theme search path.  This is a colon-separated list of folders
+# to search.
+# 
+# (icon-theme-path "${gimp_dir}/icons:${gimp_data_dir}/icons")
+
+# The name of the icon theme to use.  This is a string value.
+# 
+# (icon-theme "Symbolic")
+
+# The size of the icons to use.  Possible values are auto, theme, small,
+# medium, large and huge.
+# 
+# (icon-size auto)
+
+# When enabled, pressing F1 will open the help browser.  Possible values are
+# yes and no.
+# 
+# (use-help yes)
+
+# When enabled, dialogs will show a help button that gives access to the
+# related help page.  Without this button, the help page can still be reached
+# by pressing F1.  Possible values are yes and no.
+# 
+# (show-help-button yes)
+
+# Specifies the language preferences used by the help system. This is a
+# colon-separated list of language identifiers with decreasing priority. If
+# empty, the language is taken from the user's locale setting.  This is a
+# string value.
+# 
+# (help-locales "")
+
+# Sets the browser used by the help system.  Possible values are gimp and
+# web-browser.
+# 
+# (help-browser web-browser)
+
+# When enabled, a search of actions will also return inactive actions. 
+# Possible values are yes and no.
+# 
+# (search-show-unavailable-actions no)
+
+# The maximum number of actions saved in history.  This is an integer value.
+# 
+# (action-history-size 100)
+
+# When enabled, the online user manual will be used by the help system.
+# Otherwise the locally installed copy is used.  Possible values are yes and
+# no.
+# 
+# (user-manual-online no)
+
+# The location of the online user manual. This is used if
+# 'user-manual-online' is enabled.  This is a string value.
+# 
+# (user-manual-online-uri "https://docs.gimp.org/2.10")
+
+# The window type hint that is set on dock windows and the toolbox window.
+# This may affect the way your window manager decorates and handles these
+# windows.  Possible values are normal, utility and keep-above.
+# 
+# (dock-window-hint utility)
+
+# Sets the handedness for cursor positioning.  Possible values are left and
+# right.
+# 
+# (cursor-handedness right)
+
+# Enable the N-Point Deformation tool.  Possible values are yes and no.
+# 
+# (playground-npd-tool no)
+
+# Enable the Seamless Clone tool.  Possible values are yes and no.
+# 
+# (playground-seamless-clone-tool no)
+
+# How to handle embedded color profiles when opening a file.  Possible values
+# are ask, keep and convert.
+# 
+# (color-profile-policy ask)
+
+# Sets the default folder path for all color profile file dialogs.  This is a
+# single filename.
+# 
+# 
+
+# Sets the default rendering intent for the 'Convert to Color Profile'
+# dialog.  Possible values are perceptual, relative-colorimetric, saturation
+# and absolute-colorimetric.
+# 
+# (image-convert-profile-intent relative-colorimetric)
+
+# Sets the default 'Black Point Compensation' state for the 'Convert to Color
+# Profile' dialog.  Possible values are yes and no.
+# 
+# (image-convert-profile-black-point-compensation yes)
+
+# Sets the default layer dithering method for the 'Convert Precision' dialog.
+#  Possible values are none, floyd-steinberg, bayer, random,
+# random-covariant, add, add-covariant, xor, xor-covariant, blue-noise and
+# blue-noise-covariant.
+# 
+# (image-convert-precision-layer-dither-method none)
+
+# Sets the default text layer dithering method for the 'Convert Precision'
+# dialog.  Possible values are none, floyd-steinberg, bayer, random,
+# random-covariant, add, add-covariant, xor, xor-covariant, blue-noise and
+# blue-noise-covariant.
+# 
+# (image-convert-precision-text-layer-dither-method none)
+
+# Sets the default channel dithering method for the 'Convert Precision'
+# dialog.  Possible values are none, floyd-steinberg, bayer, random,
+# random-covariant, add, add-covariant, xor, xor-covariant, blue-noise and
+# blue-noise-covariant.
+# 
+# (image-convert-precision-channel-dither-method none)
+
+# Sets the default palette type for the 'Convert to Indexed' dialog. 
+# Possible values are generate, web, mono and custom.
+# 
+# (image-convert-indexed-palette-type generate)
+
+# Sets the default maximum number of colors for the 'Convert to Indexed'
+# dialog.  This is an integer value.
+# 
+# (image-convert-indexed-max-colors 256)
+
+# Sets the default 'Remove duplicate colors' state for the 'Convert to
+# Indexed' dialog.  Possible values are yes and no.
+# 
+# (image-convert-indexed-remove-duplicates yes)
+
+# Sets the default dithering type for the 'Convert to Indexed' dialog. 
+# Possible values are none, fs, fs-lowbleed and fixed.
+# 
+# (image-convert-indexed-dither-type none)
+
+# Sets the default 'Dither alpha' state for the 'Convert to Indexed' dialog. 
+# Possible values are yes and no.
+# 
+# (image-convert-indexed-dither-alpha no)
+
+# Sets the default 'Dither text layers' state for the 'Convert to Indexed'
+# dialog.  Possible values are yes and no.
+# 
+# (image-convert-indexed-dither-text-layers no)
+
+# Sets the default fill type for the 'Canvas Size' dialog.  Possible values
+# are foreground, background, white, transparent and pattern.
+# 
+# (image-resize-fill-type transparent)
+
+# Sets the default set of layers to resize for the 'Canvas Size' dialog. 
+# Possible values are none, all, image-sized, visible and linked.
+# 
+# (image-resize-layer-set none)
+
+# Sets the default 'Resize text layers' state for the 'Canvas Size' dialog. 
+# Possible values are yes and no.
+# 
+# (image-resize-resize-text-layers no)
+
+# Sets the default layer name for the 'New Layer' dialog.  This is a string
+# value.
+# 
+# (layer-new-name "Layer")
+
+# Sets the default mode for the 'New Layer' dialog.  Possible values are
+# normal-legacy, dissolve, behind-legacy, multiply-legacy, screen-legacy,
+# overlay-legacy, difference-legacy, addition-legacy, subtract-legacy,
+# darken-only-legacy, lighten-only-legacy, hsv-hue-legacy,
+# hsv-saturation-legacy, hsl-color-legacy, hsv-value-legacy, divide-legacy,
+# dodge-legacy, burn-legacy, hardlight-legacy, softlight-legacy,
+# grain-extract-legacy, grain-merge-legacy, color-erase-legacy, overlay,
+# lch-hue, lch-chroma, lch-color, lch-lightness, normal, behind, multiply,
+# screen, difference, addition, subtract, darken-only, lighten-only, hsv-hue,
+# hsv-saturation, hsl-color, hsv-value, divide, dodge, burn, hardlight,
+# softlight, grain-extract, grain-merge, vivid-light, pin-light,
+# linear-light, hard-mix, exclusion, linear-burn, luma-darken-only,
+# luma-lighten-only, luminance, color-erase, erase, merge, split,
+# pass-through, replace and anti-erase.
+# 
+# (layer-new-mode normal)
+
+# Sets the default blend space for the 'New Layer' dialog.  Possible values
+# are auto, rgb-linear, rgb-perceptual and lab.
+# 
+# (layer-new-blend-space auto)
+
+# Sets the default composite space for the 'New Layer' dialog.  Possible
+# values are auto, rgb-linear, rgb-perceptual and lab.
+# 
+# (layer-new-composite-space auto)
+
+# Sets the default composite mode for the 'New Layer' dialog.  Possible
+# values are auto, union, clip-to-backdrop, clip-to-layer and intersection.
+# 
+# (layer-new-composite-mode auto)
+
+# Sets the default opacity for the 'New Layer' dialog.  This is a float
+# value.
+# 
+# (layer-new-opacity 1)
+
+# Sets the default fill type for the 'New Layer' dialog.  Possible values are
+# foreground, background, white, transparent and pattern.
+# 
+# (layer-new-fill-type transparent)
+
+# Sets the default fill type for the 'Layer Boundary Size' dialog.  Possible
+# values are foreground, background, white, transparent and pattern.
+# 
+# (layer-resize-fill-type transparent)
+
+# Sets the default mask for the 'Add Layer Mask' dialog.  Possible values are
+# white, black, alpha, alpha-transfer, selection, copy and channel.
+# 
+# (layer-add-mask-type white)
+
+# Sets the default 'invert mask' state for the 'Add Layer Mask' dialog. 
+# Possible values are yes and no.
+# 
+# (layer-add-mask-invert no)
+
+# Sets the default merge type for the 'Merge Visible Layers' dialog. 
+# Possible values are expand-as-necessary, clip-to-image,
+# clip-to-bottom-layer and flatten-image.
+# 
+# (layer-merge-type expand-as-necessary)
+
+# Sets the default 'Active group only' for the 'Merge Visible Layers' dialog.
+#  Possible values are yes and no.
+# 
+# (layer-merge-active-group-only yes)
+
+# Sets the default 'Discard invisible' for the 'Merge Visible Layers' dialog.
+#  Possible values are yes and no.
+# 
+# (layer-merge-discard-invisible no)
+
+# Sets the default channel name for the 'New Channel' dialog.  This is a
+# string value.
+# 
+# (channel-new-name "Channel")
+
+# Sets the default color and opacity for the 'New Channel' dialog.  The color
+# is specified in the form (color-rgba red green blue alpha) with channel
+# values as floats in the range of 0.0 to 1.0.
+# 
+# (channel-new-color (color-rgba 0 0 0 0.5))
+
+# Sets the default path name for the 'New Path' dialog.  This is a string
+# value.
+# 
+# (path-new-name "Path")
+
+# Sets the default folder path for the 'Export Path' dialog.  This is a
+# single filename.
+# 
+# 
+
+# Sets the default 'Export the active path' state for the 'Export Path'
+# dialog.  Possible values are yes and no.
+# 
+# (path-export-active-only yes)
+
+# Sets the default folder path for the 'Import Path' dialog.  This is a
+# single filename.
+# 
+# 
+
+# Sets the default 'Merge imported paths' state for the 'Import Path' dialog.
+#  Possible values are yes and no.
+# 
+# (path-import-merge no)
+
+# Sets the default 'Scale imported paths to fit size' state for the 'Import
+# Path' dialog.  Possible values are yes and no.
+# 
+# (path-import-scale no)
+
+# Sets the default feather radius for the 'Feather Selection' dialog.  This
+# is a float value.
+# 
+# (selection-feather-radius 5)
+
+# Sets the default 'Selected areas continue outside the image' setting for
+# the 'Feather Selection' dialog.  Possible values are yes and no.
+# 
+# (selection-feather-edge-lock yes)
+
+# Sets the default grow radius for the 'Grow Selection' dialog.  This is a
+# float value.
+# 
+# (selection-grow-radius 1)
+
+# Sets the default shrink radius for the 'Shrink Selection' dialog.  This is
+# a float value.
+# 
+# (selection-shrink-radius 1)
+
+# Sets the default 'Selected areas continue outside the image' setting for
+# the 'Shrink Selection' dialog.  Possible values are yes and no.
+# 
+# (selection-shrink-edge-lock no)
+
+# Sets the default border radius for the 'Border Selection' dialog.  This is
+# a float value.
+# 
+# (selection-border-radius 5)
+
+# Sets the default border style for the 'Border Selection' dialog.  Possible
+# values are hard, smooth and feathered.
+# 
+# (selection-border-style smooth)
+
+# Sets the default 'Selected areas continue outside the image' setting for
+# the 'Border Selection' dialog.  Possible values are yes and no.
+# 
+# (selection-border-edge-lock no)
+
+# The default fill options for the fill dialogs.  This is a parameter list.
+# 
+# (fill-options
+#     (style solid)
+#     (antialias yes)
+#     (feather no)
+#     (feather-radius 10))
+
+# The default stroke options for the stroke dialogs.  This is a parameter
+# list.
+# 
+# (stroke-options
+#     (style solid)
+#     (antialias yes)
+#     (feather no)
+#     (feather-radius 10)
+#     (method line)
+#     (width 6)
+#     (unit pixels)
+#     (cap-style butt)
+#     (join-style miter)
+#     (miter-limit 10)
+#     (dash-offset 0)
+#     (dash-info 0)
+#     (emulate-brush-dynamics no))
+
+# Where to search for fractals used by the Fractal Explorer plug-in.  This is
+# a colon-separated list of folders to search.
+# 
+# (fractalexplorer-path "${gimp_dir}/fractalexplorer:${gimp_data_dir}/fractalexplorer")
+
+# Where to search for Gfig figures used by the Gfig plug-in.  This is a
+# colon-separated list of folders to search.
+# 
+# (gfig-path "${gimp_dir}/gfig:${gimp_data_dir}/gfig")
+
+# Where to search for gflares used by the GFlare plug-in.  This is a
+# colon-separated list of folders to search.
+# 
+# (gflare-path "${gimp_dir}/gflare:${gimp_data_dir}/gflare")
+
+# Where to search for data used by the Gimpressionist plug-in.  This is a
+# colon-separated list of folders to search.
+# 
+# (gimpressionist-path "${gimp_dir}/gimpressionist:${gimp_data_dir}/gimpressionist")
+
+# This path will be searched for scripts when the Script-Fu plug-in is run. 
+# This is a colon-separated list of folders to search.
+# 
+# (script-fu-path "${gimp_dir}/scripts:${gimp_data_dir}/scripts")
+