From 5c1676dfe6d2f3c837a5e074117b45613fd29a72 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Sun, 7 Apr 2024 20:30:19 +0200 Subject: Adding upstream version 2.10.34. Signed-off-by: Daniel Baumann --- INSTALL.in | 529 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 529 insertions(+) create mode 100644 INSTALL.in (limited to 'INSTALL.in') diff --git a/INSTALL.in b/INSTALL.in new file mode 100644 index 0000000..505b190 --- /dev/null +++ b/INSTALL.in @@ -0,0 +1,529 @@ +--------------------------------------- +Installation instructions for GIMP @GIMP_APP_VERSION@ +--------------------------------------- + +There are some basic steps to building and installing GIMP. + +GIMP @GIMP_APP_VERSION@ replaces earlier GIMP 2.x versions. It is advised that you +uninstall them before installing GIMP @GIMP_APP_VERSION@. If you want to keep your +older GIMP 2.x installation in parallel to GIMP @GIMP_APP_VERSION@, you have to +choose a separate prefix which is not in your default library search +path. + +GIMP @GIMP_APP_VERSION@ is fully backward compatible to all earlier GIMP 2.x version. +Plug-ins and scripts written for GIMP 2.8, 2.6 or earlier GIMP 2.x +versions will continue to work and don't need to be changed nor +recompiled to be used with GIMP @GIMP_APP_VERSION@. + +The most important part is to make sure the requirements for a build +are fulfilled. We depend on a number of tools and libraries which are +listed below. For libraries this means you need to also have the +header files installed. + + + ****************************************************************** + * Unless you are experienced with building software from source, * + * you should not attempt to build all these libraries yourself! * + * We suggest that you check if your distributor has development * + * packages of them and use these instead. * + ****************************************************************** + + + 1. You need to have installed a recent version of pkg-config (>= @GIMP_PKGCONFIG_VERSION@) available + from https://www.freedesktop.org/software/pkgconfig/. + + 2. You need intltool (at least @INTLTOOL_REQUIRED_VERSION@, but preferably a newer version). + Intltool can be downloaded from + https://ftp.gnome.org/pub/gnome/sources/intltool/ + You also need gettext version @XGETTEXT_REQUIRED_VERSION@ or over. Earlier gettext had + issues with script-fu localization, ending up in incomplete GIMP localization. + + 3. You need to have GEGL version @GEGL_REQUIRED_VERSION@ or newer and babl version + @BABL_REQUIRED_VERSION@ or newer. You can get them from https://gegl.org/ or clone + them from the GNOME git repository: + + https://gitlab.gnome.org/GNOME/babl.git + https://gitlab.gnome.org/GNOME/gegl.git + + Note: install GEGL with libumfpack (SuiteSparse) for alternative Matting + engine "gegl:matting-levin" and OpenEXR library for OpenEXR format + support. + + 4. You need to have installed GTK+ version @GTK_REQUIRED_VERSION@ or newer. + GIMP also needs a recent version of GLib (>= @GLIB_REQUIRED_VERSION@), GDK-Pixbuf + (>= @GDK_PIXBUF_REQUIRED_VERSION@), and Pango (>= @PANGOCAIRO_REQUIRED_VERSION@). Sources for these can be grabbed + from ftp://ftp.gtk.org/. + + 5. We use cairo >= @CAIRO_REQUIRED_VERSION@, which is hosted at + https://www.cairographics.org/. + + 6. We require PangoCairo, a Pango backend using Cairo. Make sure you + have Cairo, FreeType2 and fontconfig installed before you compile + Pango. GIMP depends on freetype2 being newer than version @FREETYPE2_REQUIRED_VERSION@ + and fontconfig @FONTCONFIG_REQUIRED_VERSION@ or newer. Older versions are known to have + bugs that seriously affect the stability of GIMP. + + We also require HarfBuzz @HARFBUZZ_REQUIRED_VERSION@ or newer, an + OpenType text shaping tool. As this is a dependency for Pango, you + will likely have it installed, but you may have to install a + development package for the headers. + + 7. The file-compressor plug-in requires zlib, libbzip2, and liblzma to + be installed. All these libraries are required dependencies. + + 8. For metadata access GIMP requires the gexiv2 library. It is hosted + at https://wiki.gnome.org/Projects/gexiv2 . + + 9. libpng, libjpeg, libtiff and lcms are hard dependencies that can + not be disabled. + + 10. For MyPaint brushes, brushlib (libmypaint) @LIBMYPAINT_REQUIRED_VERSION@ is used. + The libmypaint repository is hosted at: + + https://github.com/mypaint/libmypaint + + If installing from repository, do not install the master branch! + Checkout the tag "v1.3.0" instead, or simply install from a tarball + or from your favorite package manager. + You may also checkout the "libmypaint-v1" branch, which is the + development branch for libmypaint v1.x and has some more recent + fixes. + + 11. We also need the mypaint-brushes data package: + + https://github.com/mypaint/mypaint-brushes + + If installing from repository, install from branch "v1.3.x" or the + particular tag "v1.3.0". In particular do not install from master + which installs brushes incompatible with GIMP. + + Also this is a data packages and therefore it will install the + pkg-config file inside `$PREFIX/share/pkgconfig/`. If you install + mypaint-brushes from repository in a non-standard prefix, you will + have to make sure your $PKG_CONFIG_PATH environment variable also + lists `$PREFIX/share/pkgconfig/`. + + 12. You may want to install other third party libraries or programs + that are needed for some of the available plug-ins. We recommend + to check that the following libraries are installed: openjpeg, + webkit, libmng, librsvg, libwmf, libaa and libgs (Ghostscript). + + 13. HEIF support depends on the libheif library. If you don't have + access to pre-built packages, the code is available at: + + https://github.com/strukturag/libheif + + Make sure you build libheif with libde265 and libx265 support (for + respectively decoding and encoding), otherwise the plug-in is + mostly useless. + + 14. The Python extension requires Python 2 development headers (@PYTHON2_REQUIRED_VERSION@ + or newer) to be present. You will also need PyGTK and the + respective development headers. + + 15. Windows builds can now generate backtrace logs upon a crash. + The logs will be available in: %APPDATA%\GIMP\@GIMP_APP_VERSION@\CrashLog\ + The feature depends on Dr.MinGW's ExcHndl library: + + https://github.com/jrfonseca/drmingw + + 16. Configure GIMP by running the `configure' script. You may want + to pass some options to it, see below. + + 17. Build GIMP by running `make'. The use of GNU make is recommended. + If you need to tweak the build to make it work with other flavours + of make, we'd appreciate if you'd send us a patch with the changes. + + 18. Install GIMP by running `make install'. In order to avoid clashes + with other versions of GIMP, we install a binary called gimp-@GIMP_APP_VERSION@. + By default there's also a link created so that you can type 'gimp' + to start gimp-@GIMP_APP_VERSION@. + + 19. Summary of required packages and what version you need: + + Package Name Version + + ATK @ATK_REQUIRED_VERSION@ + babl @BABL_REQUIRED_VERSION@ + cairo @CAIRO_REQUIRED_VERSION@ + Fontconfig @FONTCONFIG_REQUIRED_VERSION@ + freetype2 @FREETYPE2_REQUIRED_VERSION@ + GDK-PixBuf @GDK_PIXBUF_REQUIRED_VERSION@ + GEGL @GEGL_REQUIRED_VERSION@ + GIO + GLib @GLIB_REQUIRED_VERSION@ + glib-networking + GTK+ @GTK_REQUIRED_VERSION@ + HarfBuzz @HARFBUZZ_REQUIRED_VERSION@ + libbzip2 + libjpeg + liblzma @LIBLZMA_REQUIRED_VERSION@ + libmypaint @LIBMYPAINT_REQUIRED_VERSION@ + libpng @LIBPNG_REQUIRED_VERSION@ + libpoppler-glib @POPPLER_REQUIRED_VERSION@ + librsvg @RSVG_REQUIRED_VERSION@ + libtiff + Little CMS @LCMS_REQUIRED_VERSION@ + mypaint-brushes-1.0 + pangocairo @PANGOCAIRO_REQUIRED_VERSION@ + poppler-data @POPPLER_DATA_REQUIRED_VERSION@ + zlib + + 20. Summary of optional packages: + + Package Name Version Feature + + cairo-pdf @CAIRO_PDF_REQUIRED_VERSION@ PDF export + ExcHndl - Crash logs on Windows with Dr. MinGW + gs - ghostscript + libaa - ASCII art + libheif @LIBHEIF_REQUIRED_VERSION@ HEIF + libmng - MNG + libwebp @WEBP_REQUIRED_VERSION@ WebP (built with --enable-libwebpmux and --enable-libwebpdemux) + libwmf @WMF_REQUIRED_VERSION@ WMF + libXcursor - X11 Mouse Cursor + libxpm - XPM + openexr @OPENEXR_REQUIRED_VERSION@ OpenEXR + OpenJPEG @OPENJPEG_REQUIRED_VERSION@ JPEG 2000 + python 2 @PYTHON2_REQUIRED_VERSION@ Python plug-ins + webkit @WEBKIT_REQUIRED_VERSION@ Help browser & webpage + + 21. Summary of optional runtime dependencies: + + darktable >= 1.7, with lua support enabled for raw loading + RawTherapee >= 5.2 for raw loading + xdg-email for sending emails + sendmail for sending emails if --with-sendmail enabled + gdb or lldb for our new bug-reporting dialog + "gegl:matting-levin" GEGL operation for alternative matting engine + +Please make sure you don't have any old GTK+-2.x, jpeg, etc. libraries +lying around on your system, otherwise configure may fail to find the +new ones. + + +Generic instructions for configuring and compiling auto-configured +packages are included below. Here is an illustration of commands that +might be used to build and install GIMP. The actual configuration, +compilation and installation output is not shown. + + % tar xvfz gimp-@GIMP_VERSION@.tar.gz # unpack the sources + % cd gimp-@GIMP_VERSION@ # change to the toplevel directory + % ./configure # run the `configure' script + % make # build GIMP + % make install # install GIMP + + +The `configure' script examines your system, and adapts GIMP to run on +it. The script has many options, some of which are described in the +generic instructions included at the end of this file. All of the +options can be listed using the command `./configure --help'. There +are several special options the GIMP `configure' script recognizes. +These are: + + --disable-vector-icons. This option installs raster icons instead of + vector icons. + + --enable-relocatable-bundle. This option forces GIMP to search some + resources (e.g. MyPaint brushes or libwmf fonts) relatively to the + running prefix, rather than using build-time paths. + + --enable-shared and --disable-shared. This option affects whether + shared libraries will be built or not. Shared libraries provide + for much smaller executables. The default is to enable shared + libraries. Disabling shared libraries is almost never a good idea. + + --enable-debug and --disable-debug. This option causes the build + process to compile with debugging enabled. If debugging is + disabled, GIMP will instead be compiled with optimizations turned + on. The default is for debugging to be disabled. NOTE: This + option is intended primarily as a convenience for developers. + + --enable-profile and --disable-profile. This option causes the build + process to compile with execution profiling enabled. The default is + for profiling to be disabled. NOTE: This option is intended primarily + as a convenience for developers. + + --enable-ansi and --disable-ansi. This option causes stricter + ANSI C checking to be performed when compiling with GCC. The + default is for strict checking to be disabled. NOTE: This option + is intended primarily as a convenience for developers. + + --with-gimpdir=DIR. This option changes the default directory + GIMP uses to search for its configuration files from + ~/.config/GIMP/@GIMP_APP_VERSION@ (the directory .config/GIMP/@GIMP_APP_VERSION@ + in the user's home directory) to ~/.config/DIR/@GIMP_APP_VERSION@. + If DIR is an absolute path, the directory will be changed to DIR. + + --with-shm=[none|sysv|posix|auto]. This option allows you to specify + how image data is transported between the core and plug-ins. Usually + the best way to do this is detected automatically. + + --without-libtiff. configure will bail out if libtiff can not be + found. You better fix the underlying problem and install these + libraries with their header files. If you absolutely want to + compile GIMP without support for TIFF you need to explicitly + disable them using this option. + + --without-aa. The AA plug-in needs libaa and configure checks for + its presence. Use --without-aa if you run into problems. + + --without-libxpm. The XPM plug-in needs libxpm and configure checks + for its presence. If for some reason you don't want to build the + XPM plug-in even though the library is installed, use + --without-libxpm to disable it explicitly. + + --without-libmng. The MNG plug-in needs libmng and configure checks + for its presence. If for some reason you don't want to build the + MNG plug-in even though the library is installed, use + --without-libmng to disable it explicitly. + + --without-wmf. The WMF plug-in needs libwmf2 and configure checks for + its presence. Use --without-wmf if you run into problems. + + --without-webkit. If for some reason you don't want to build the + Help Browser plug-in, you can use --without-webkit to disable + it explicitly. + + --without-librsvg. If for some reason you want to build GIMP without + SVG support, you can build --without-librsvg. + + --without-print. If for some reason you don't want to build the Print + plug-in based on the GtkPrint API, you can build with --without-print. + + --without-alsa. If you don't want to compile ALSA support into the + MIDI input controller module, you can use the --without-alsa option. + + --without-linux-input. If you don't want to compile the Linux Input + controller module, you can use the --without-linux-input option. + + --without-hal. If you want to build the Linux Input controller module + without HAL support, you can use the --without-hal option. + + --without-mac-twain. If you don't want to compile the Mac OS X + TWAIN plug-in, you can use the --without-mac-twain option. + + --with-gif-compression=[lzw|rle|none]. Allows to tune the compression + algorithm used by the GIF plug-in. If you are afraid of Unisys' LZW + patent (which should have expired in most countries by now), you + can go for simple run-length encoding or even configure the plug-in + to create uncompressed GIFs. + + --enable-gtk-doc. This option controls whether the libgimp API + references will be created using gtk-doc. The HTML pages are + included in a standard tarball, so you will only need this if you + are building from SVN. + + --with-html-dir=PATH. This option allows to specify where the + libgimp API reference should be installed. You might want to modify + the path so it points to the place where glib and gtk+ installed + their API references so that the libgimp reference can link to + them. + + --disable-mp. This option allows you to disable support for multiple + processors. It is enabled by default. + + --with-sendmail[=PATH]. This option is used to tell GIMP to send email + through sendmail instead of xdg-email. You can optionally indicate + where to find the sendmail command. Otherwise sendmail will simply + be searched in your $PATH at runtime. + + --with-desktop-dir=[PATH]. This option specifies where to install + desktop files. These files are used by desktop environments that + comply to the specs published at freedesktop.org. The default + value ${prefix}/share should be fine if your desktop environment + is installed in the same prefix as gimp. No files are installed + if you call configure with --without-desktop-dir. + + --disable-default-binary. Use this option if you don't want to make + gimp-@GIMP_APP_VERSION@ the default GIMP installation. Otherwise a link called + gimp pointing to the gimp-@GIMP_APP_VERSION@ executable will be installed. + + --disable-gimp-console. Use this option if you don't want the + gimp-console binary to be built in addition to the standard binary. + gimp-console is useful for command-line batch mode or as a server. + + --disable-python. If for some reason you don't want to build the + Python based PyGIMP plug-in, you can use --disable-python. + + --without-script-fu. If for some reason you don't want to build the + Script-Fu plug-in, you can use --without-script-fu. + + --without-xmc. The X11 Mouse Cursor(XMC) plug-in needs libXcursor + and configure checks for its presence. If for some reason you + don't want to build the XMC plug-in even though the library is + installed, use --without-xmc to disable it explicitly. + + +The `make' command builds several things: + - A bunch of public libraries in the directories starting with 'libgimp'. + - The plug-in programs in the 'plug-ins' directory. + - Some modules in the 'modules' subdirectory. + - The main GIMP program 'gimp-@GIMP_APP_VERSION@' in `app'. + +The `make install' commands installs the GIMP header files associated +with the libgimp libraries, the plug-ins, some data files and the GIMP +executable. After running `make install' and assuming the build process +was successful you should be able to run `gimp'. + + +When ./configure fails +====================== + +'configure' uses pkg-config, a tool that replaces the old foo-config +scripts. The most recent version is available from + https://www.freedesktop.org/software/pkgconfig/ + +'configure' tries to compile and run a short GTK+ program. There are +several reasons why this might fail: + +* pkg-config could not find the file 'gtk+-2.0.pc' that gets installed + with GTK. (This file is used to get information about where GTK+ is + installed.) + + Fix: Either make sure that this file is in the path where pkg-config + looks for it (try 'pkg-config --debug' or add the location of + gtk+-2.0.pc to the environment variable PKG_CONFIG_PATH before running + configure. + +* Libraries you installed are not found when you attempt to start GIMP. + The details of how to fix this problem will depend on the system: + + On Linux and other systems using ELF libraries, add the directory to + holding the library to /etc/ld.so.conf or to the environment variable + LD_LIBRARY_PATH, and run 'ldconfig'. + + On other systems, it may be necessary to encode this path + into the executable, by setting the LDFLAGS environment variable + before running configure. For example: + + LDFLAGS="-R/home/joe/lib" ./configure + or + LDFLAGS="-Wl,-rpath -Wl,/home/joe/lib" ./configure + +* An old version of the GTK+ libraries was found instead of + your newly installed version. This commonly happens if a + binary package of GTK+ was previously installed on your system, + and you later compiled GTK+ from source. + + Fix: Remove the old libraries and include files. If you are afraid + that removing the old libraries may break other packages supplied by + your distributor, you can try installing GLib, GTK+ and other + libraries in a different prefix after setting the environment + variable PKG_CONFIG_LIBDIR to point to lib/pkgconfig/ in that new + prefix so that it does not try to read the *.pc files from the + default directory (/usr/lib/pkgconfig). However, removing the old + packages is often the easier solution. + +A detailed log of the ./configure output is written to the file +config.log. This may help diagnose problems. + + +When ./configure fails on plug-ins +================================== + +There are some GIMP plug-ins that need additional third-party libraries +installed on your system. For example to compile the plug-ins that load +and save JPEG, PNG or TIFF files you need the related libraries and header +files installed, otherwise you'll get a message that plug-in xyz will not +be built. + +If you are sure that those libraries are correctly installed, but configure +fails to detect them, the following might help: + +Set your LDFLAGS environment variable to look for the library in a certain +place, e.g. if you are working in a bash shell you would say: + export LDFLAGS="-L -L" +before you run configure. + +Set your CPPFLAGS environment variable to look for the header file in a +certain place, e.g. if you are working in a bash shell you would say: + export CPPFLAGS="-I -I" +before you run configure. + + + Generic Instructions for Building Auto-Configured Packages + ========================================================== + + +To compile this package: + +1. Configure the package for your system. In the directory that this +file is in, type `./configure'. If you're using `csh' on an old +version of System V, you might need to type `sh configure' instead to +prevent `csh' from trying to execute `configure' itself. + +The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation, and +creates the Makefile(s) (one in each subdirectory of the source +directory). In some packages it creates a C header file containing +system-dependent definitions. It also creates a file `config.status' +that you can run in the future to recreate the current configuration. +Running `configure' takes a minute or two. + +To compile the package in a different directory from the one +containing the source code, you must use GNU make. `cd' to the +directory where you want the object files and executables to go and +run `configure' with the option `--srcdir=DIR', where DIR is the +directory that contains the source code. Using this option is +actually unnecessary if the source code is in the parent directory of +the one in which you are compiling; `configure' automatically checks +for the source code in `..' if it does not find it in the current +directory. + +By default, `make install' will install the package's files in +/usr/local/bin, /usr/local/lib, /usr/local/man, etc. You can specify +an installation prefix other than /usr/local by giving `configure' the +option `--prefix=PATH'. + +You can specify separate installation prefixes for machine-specific +files and machine-independent files. If you give `configure' the +option `--exec-prefix=PATH', the package will use PATH as the prefix +for installing programs and libraries. Normally, all files are +installed using the same prefix. + +`configure' ignores any other arguments that you give it. + +If your system requires unusual options for compilation or linking +that `configure' doesn't know about, you can give `configure' initial +values for some variables by setting them in the environment. In +Bourne-compatible shells, you can do that on the command line like +this: + CC='gcc -traditional' DEFS=-D_POSIX_SOURCE ./configure + +The `make' variables that you might want to override with environment +variables when running `configure' are: + +(For these variables, any value given in the environment overrides the +value that `configure' would choose:) +CC C compiler program. + Default is `cc', or `gcc' if `gcc' is in your PATH. +INSTALL Program to use to install files. + Default is `install' if you have it, `cp' otherwise. +INCLUDEDIR Directory for `configure' to search for include files. + Default is /usr/include. + +(For these variables, any value given in the environment is added to +the value that `configure' chooses:) +DEFS Configuration options, in the form '-Dfoo -Dbar ...' +LIBS Libraries to link with, in the form '-lfoo -lbar ...' + +If you need to do unusual things to compile the package, we encourage +you to teach `configure' how to do them and mail the diffs to the +address given in the README so we can include them in the next +release. + +2. Type `make' to compile the package. + +3. Type `make install' to install programs, data files, and +documentation. + +4. You can remove the program binaries and object files from the +source directory by typing `make clean'. To also remove the +Makefile(s), the header file containing system-dependent definitions +(if the package uses one), and `config.status' (all the files that +`configure' created), type `make distclean'. + +The file `configure.ac' is used as a template to create `configure' by +a program called `autoconf'. You will only need it if you want to +regenerate `configure' using a newer version of `autoconf'. -- cgit v1.2.3